From 2f002eceae44c21656b7f596624c636157ffdf1c Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 9 Apr 2012 13:29:06 +0200 Subject: [PATCH] MX35: mx35pdk: wrong board revision The board revision is detected accessing to the pmic, that is not available before relocation (I2C). This generates the following error: CPU: Freescale i.MX35 rev 2.0 at 532 MHz. Reset cause: WDOG = 7 is invalid. Should be less than 0 Board: MX35 PDK 1.0 The revision number is wrong, as a default value is printed (tested on a mx35pdk Rev. 2.0). Move the output in the board_late_init(), when pmic can be accessed. Signed-off-by: Stefano Babic --- board/freescale/mx35pdk/mx35pdk.c | 11 ----------- include/configs/mx35pdk.h | 1 - 2 files changed, 12 deletions(-) diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index cce712354f..bc415b8462 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -258,17 +258,6 @@ int board_late_init(void) val |= 0x80; mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); - return 0; -} - -int checkboard(void) -{ - /* - * Be sure that I2C is initialized to check - * the board revision - */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - /* Print board revision */ printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F); diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 1e03639adf..de4b954a52 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -34,7 +34,6 @@ #define CONFIG_MX35_HCLK_FREQ 24000000 #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO /* Set TEXT at the beginning of the NOR flash */ #define CONFIG_SYS_TEXT_BASE 0xA0000000 -- 2.25.1