From 2ea98fc39b21392c1556d6768604f54a578278d4 Mon Sep 17 00:00:00 2001 From: Matti Laakso Date: Sun, 14 Jan 2018 17:39:53 +0200 Subject: [PATCH] ar71xx: fix 5 GHz Wi-Fi on NBG6716 Some NBG6716 do not have ath10k calibration data in flash, only in chip OTP. To determine if flash has a valid calibration data, the first two bytes telling the length of the calibration data are checked against the requested length. If the lengths match, calibration data is valid and read from flash. Signed-off-by: Matti Laakso --- .../base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a3d4867b0b..e6ea873e40 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -18,12 +18,18 @@ ath10kcal_extract() { local part=$1 local offset=$2 local count=$3 - local mtd + local mtd cal_size mtd=$(find_mtd_chardev $part) [ -n "$mtd" ] || \ ath10kcal_die "no mtd device found for partition $part" + # Check that the calibration data size in header equals the desired size + cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"') + + [ "$count" = "$cal_size" ] || \ + ath10kcal_die "no calibration data found in $part" + dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $mtd" } -- 2.25.1