From 2d91deba45d5a284614e06cc55e2be03599ca26d Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Wed, 1 Aug 2001 17:21:35 +0000 Subject: [PATCH] Allow multiple shells to be enabled. --- Changelog | 1 + Config.h | 73 ++++++++++++++++++------------------------ Makefile | 4 +-- README | 32 ++++++++++++++++++ applets.h | 22 +++++++++++-- applets/usage.h | 6 ++-- ash.c | 4 +-- debian/Config.h-deb | 73 ++++++++++++++++++------------------------ debian/Config.h-static | 73 ++++++++++++++++++------------------------ debian/Config.h-udeb | 73 ++++++++++++++++++------------------------ hush.c | 8 ++--- include/applets.h | 22 +++++++++++-- include/usage.h | 6 ++-- lash.c | 2 +- msh.c | 4 +-- sh.c | 48 --------------------------- shell/ash.c | 4 +-- shell/hush.c | 8 ++--- shell/lash.c | 2 +- shell/msh.c | 4 +-- usage.h | 6 ++-- 21 files changed, 225 insertions(+), 250 deletions(-) delete mode 100644 sh.c diff --git a/Changelog b/Changelog index 45005b589..632541744 100644 --- a/Changelog +++ b/Changelog @@ -42,6 +42,7 @@ -- Reworked rdate option handling (is now smaller). -- Size reduction in ping -- Always write dd counts to stderr + -- Allow multiple shells to be enabled * Aaron Lehmann -- slimmed down md5sum -- contributed a nice new (hand written, not lex/yacc) Posix math diff --git a/Config.h b/Config.h index 4523fbcab..831eb933a 100644 --- a/Config.h +++ b/Config.h @@ -9,6 +9,7 @@ // BusyBox Applications //#define BB_ADJTIMEX //#define BB_AR +//#define BB_ASH #define BB_BASENAME #define BB_CAT #define BB_CHGRP @@ -51,6 +52,7 @@ #define BB_HEAD //#define BB_HOSTID //#define BB_HOSTNAME +//#define BB_HUSH #define BB_ID //#define BB_IFCONFIG #define BB_INIT @@ -58,6 +60,7 @@ #define BB_KILL #define BB_KILLALL #define BB_KLOGD +//#define BB_LASH //#define BB_LENGTH #define BB_LN //#define BB_LOADACM @@ -78,6 +81,7 @@ #define BB_MODPROBE #define BB_MORE #define BB_MOUNT +#define BB_MSH //#define BB_MT #define BB_MV //#define BB_NC @@ -101,7 +105,6 @@ //#define BB_RPM2CPIO #define BB_SED //#define BB_SETKEYCODES -#define BB_SH #define BB_SLEEP #define BB_SORT //#define BB_STTY @@ -146,40 +149,12 @@ // pretty/useful). // // -// If you enabled BB_SH above, you may select one of the following shells. -// You can only select ONE of the following shells. Sorry. -// -// lash is the very smallest shell (adds just 10k) and it is quite usable as -// a command prompt, but it is not suitable for any but the most trivial -// scripting (such as an initrd that calls insmod a few times) since it does -// not understand Bourne shell grammer. It does handle pipes, redirects, and -// job control though. Adding in command editing makes it very nice -// lightweight command prompt. -//#define BB_FEATURE_LASH -// -// hush is also quite small (just 18k) and it has very complete Bourne shell -// grammer. It handles if/then/else/fi just fine, but doesn't handle loops -// like for/do/done or case/esac and such. It also currently has a problem -// with job control. -//#define BB_FEATURE_HUSH -// -// msh: The minix shell (adds just 30k) is quite complete and handles things -// like for/do/done, case/esac and all the things you expect a Bourne shell to -// do. It is not always pedantically correct about Bourne shell grammer (try -// running the shell testscript "tests/sh.testcases" on it and compare vs bash) -// but for most things it works quite well. It also uses only vfork, so it can -// be used on uClinux systems. This was only recently added, so there is still -// room to shrink it further... -#define BB_FEATURE_MSH -// -// ash: This adds about 60k in the default configuration and is the most -// complete and most pedantically correct shell included with busybox. This -// shell was also recently added, and several people (mainly Vladimir and Erik) -// have been working on it. There are a number of configurable things at the -// top of ash.c as well, so check those out if you want to tweak things. The -// Posix math support is currently disabled (that bit of code was horrible) but -// will be restored for the next BusyBox release. -//#define BB_FEATURE_ASH +// If you enabled one or more of the shells, you may select which one +// should be run when sh is invoked: +//#define BB_FEATURE_SH_IS_ASH +//#define BB_FEATURE_SH_IS_HUSH +//#define BB_FEATURE_SH_IS_LASH +#define BB_FEATURE_SH_IS_MSH // // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have @@ -286,11 +261,11 @@ #define BB_FEATURE_SORT_UNIQUE // // Enable command line editing in the shell. -// Only relevant if BB_SH is enabled. On by default. +// Only relevant if a shell is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING // // Enable tab completion in the shell. This is now working quite nicely. -// This feature adds a bit over 4k. Only relevant if BB_SH is enabled. +// This feature adds a bit over 4k. Only relevant if a shell is enabled. #define BB_FEATURE_COMMAND_TAB_COMPLETION // // Attempts to match usernames in a ~-prefixed path @@ -299,7 +274,7 @@ //Allow the shell to invoke all the compiled in BusyBox applets as if they //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path @@ -308,13 +283,13 @@ //will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ //busybox. Some systems want this, others do not. Choose wisely. :-) This //only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. -// Only relevant if BB_SH is enabled. Off by default. +// Only relevant if a shell is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // // Uncomment this option for a fancy shell prompt that includes the // current username and hostname. On systems that don't have usernames // or hostnames, this can look hideous. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options @@ -435,8 +410,8 @@ #undef BB_KLOGD /* Uses daemon() */ #undef BB_UPDATE /* Uses daemon() */ #endif -#if defined BB_SH - #if defined BB_FEATURE_COMMAND_EDITING +#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH + #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT #else #undef BB_FEATURE_COMMAND_EDITING @@ -494,3 +469,17 @@ #define BB_LOGREAD #endif #endif +// +#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH +# define BB_SH +# define shell_main ash_main +#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH +# define BB_SH +# define shell_main hush_main +#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH +# define BB_SH +# define shell_main lash_main +#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH +# define BB_SH +# define shell_main msh_main +#endif diff --git a/Makefile b/Makefile index 88a7aa0df..287c3c834 100644 --- a/Makefile +++ b/Makefile @@ -349,7 +349,7 @@ busybox.links: busybox.mkll Config.h applets.h - $(SHELL) $^ >$@ nfsmount.o cmdedit.o: %.o: %.h -sh.o: cmdedit.h +ash.o hush.o lash.o msh.o: cmdedit.h $(OBJECTS): %.o: %.c Config.h busybox.h applets.h Makefile $(CC) $(CFLAGS) -I. $(patsubst %,-I%,$(subst :, ,$(BB_SRC_DIR))) -c $< -o $*.o @@ -377,8 +377,6 @@ libbb.a: $(LIBBB_MOBJ) $(LIBBB_AROBJS) $(LIBBB_OBJS) usage.o: usage.h -sh.o: sh.c lash.c hush.c msh.c ash.c - libbb/loop.o: libbb/loop.h libbb/loop.h: mk_loop_h.sh diff --git a/README b/README index ae0215c47..4f806a0bf 100644 --- a/README +++ b/README @@ -51,6 +51,38 @@ Supported kernels: ---------------- +Shells: + +lash is the very smallest shell (adds just 10k) and it is quite usable as +a command prompt, but it is not suitable for any but the most trivial +scripting (such as an initrd that calls insmod a few times) since it does +not understand Bourne shell grammer. It does handle pipes, redirects, and +job control though. Adding in command editing makes it very nice +lightweight command prompt. + +hush is also quite small (just 18k) and it has very complete Bourne shell +grammer. It handles if/then/else/fi just fine, but doesn't handle loops +like for/do/done or case/esac and such. It also currently has a problem +with job control. + +msh: The minix shell (adds just 30k) is quite complete and handles things +like for/do/done, case/esac and all the things you expect a Bourne shell to +do. It is not always pedantically correct about Bourne shell grammer (try +running the shell testscript "tests/sh.testcases" on it and compare vs bash) +but for most things it works quite well. It also uses only vfork, so it can +be used on uClinux systems. This was only recently added, so there is still +room to shrink it further... + +ash: This adds about 60k in the default configuration and is the most +complete and most pedantically correct shell included with busybox. This +shell was also recently added, and several people (mainly Vladimir and Erik) +have been working on it. There are a number of configurable things at the +top of ash.c as well, so check those out if you want to tweak things. The +Posix math support is currently disabled (that bit of code was horrible) but +will be restored for the next BusyBox release. + +---------------- + Getting help: When you find you need help, you can check out the BusyBox mailing list diff --git a/applets.h b/applets.h index 0786c39eb..184bce09b 100644 --- a/applets.h +++ b/applets.h @@ -52,6 +52,9 @@ #ifdef BB_AR APPLET(ar, ar_main, _BB_DIR_USR_BIN) #endif +#ifdef BB_ASH + APPLET_NOUSAGE("ash", ash_main, _BB_DIR_BIN) +#endif #ifdef BB_BASENAME APPLET(basename, basename_main, _BB_DIR_USR_BIN) #endif @@ -185,6 +188,9 @@ #ifdef BB_HOSTNAME APPLET(hostname, hostname_main, _BB_DIR_BIN) #endif +#ifdef BB_HUSH + APPLET_NOUSAGE("hush", hush_main, _BB_DIR_BIN) +#endif #ifdef BB_ID APPLET(id, id_main, _BB_DIR_USR_BIN) #endif @@ -206,6 +212,9 @@ #ifdef BB_KLOGD APPLET(klogd, klogd_main, _BB_DIR_SBIN) #endif +#ifdef BB_LASH + APPLET(lash, lash_main, _BB_DIR_BIN) +#endif #ifdef BB_LENGTH APPLET(length, length_main, _BB_DIR_USR_BIN) #endif @@ -272,6 +281,9 @@ #ifdef BB_MOUNT APPLET(mount, mount_main, _BB_DIR_BIN) #endif +#ifdef BB_MSH + APPLET_NOUSAGE("msh", msh_main, _BB_DIR_BIN) +#endif #ifdef BB_MT APPLET(mt, mt_main, _BB_DIR_BIN) #endif @@ -344,8 +356,14 @@ #ifdef BB_SETKEYCODES APPLET(setkeycodes, setkeycodes_main, _BB_DIR_USR_BIN) #endif -#ifdef BB_SH - APPLET(sh, shell_main, _BB_DIR_BIN) +#ifdef BB_FEATURE_SH_IS_ASH + APPLET_NOUSAGE("sh", ash_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_HUSH) + APPLET_NOUSAGE("sh", hush_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_LASH) + APPLET_NOUSAGE("sh", lash_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_MSH) + APPLET_NOUSAGE("sh", msh_main, _BB_DIR_BIN) #endif #ifdef BB_SLEEP APPLET(sleep, sleep_main, _BB_DIR_BIN) diff --git a/applets/usage.h b/applets/usage.h index 08da42b27..13759d23f 100644 --- a/applets/usage.h +++ b/applets/usage.h @@ -1365,12 +1365,12 @@ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" -#define sh_trivial_usage \ +#define lash_trivial_usage \ "[FILE]...\n" \ "or: sh -c command [args]..." -#define sh_full_usage \ +#define lash_full_usage \ "lash: The BusyBox LAme SHell (command interpreter)" -#define sh_notes_usage \ +#define lash_notes_usage \ "This command does not yet have proper documentation.\n" \ "\n" \ "Use lash just as you would use any other shell. It properly handles pipes,\n" \ diff --git a/ash.c b/ash.c index 15e1adb7c..b1aec6278 100644 --- a/ash.c +++ b/ash.c @@ -7638,7 +7638,7 @@ static void procargs (int, char **); */ int -shell_main(argc, argv) +ash_main(argc, argv) int argc; char **argv; { @@ -12874,7 +12874,7 @@ findvar(struct var **vpp, const char *name) /* * Copyright (c) 1999 Herbert Xu * This file contains code for the times builtin. - * $Id: ash.c,v 1.15 2001/07/31 21:38:23 andersen Exp $ + * $Id: ash.c,v 1.16 2001/08/01 17:21:33 kraai Exp $ */ static int timescmd (int argc, char **argv) { diff --git a/debian/Config.h-deb b/debian/Config.h-deb index 93f5597a0..020f89d81 100644 --- a/debian/Config.h-deb +++ b/debian/Config.h-deb @@ -9,6 +9,7 @@ // BusyBox Applications //#define BB_ADJTIMEX #define BB_AR +//#define BB_ASH #define BB_BASENAME #define BB_CAT #define BB_CHGRP @@ -51,6 +52,7 @@ #define BB_HEAD //#define BB_HOSTID //#define BB_HOSTNAME +//#define BB_HUSH #define BB_ID //#define BB_IFCONFIG #define BB_INIT @@ -58,6 +60,7 @@ #define BB_KILL #define BB_KILLALL #define BB_KLOGD +//#define BB_LASH //#define BB_LENGTH #define BB_LN //#define BB_LOADACM @@ -78,6 +81,7 @@ //#define BB_NC #define BB_MORE #define BB_MOUNT +//#define BB_MSH //#define BB_MT #define BB_MV //#define BB_NSLOOKUP @@ -99,7 +103,6 @@ //#define BB_RPM2CPIO #define BB_SED //#define BB_SETKEYCODES -//#define BB_SH #define BB_SLEEP #define BB_SORT //#define BB_STTY @@ -143,40 +146,12 @@ // pretty/useful). // // -// If you enabled BB_SH above, you may select one of the following shells. -// You can only select ONE of the following shells. Sorry. -// -// lash is the very smallest shell (adds just 10k) and it is quite usable as a -// command prompt, but it is not suitable for any but the most trivial scripting -// (such as an initrd that calls insmod a few times) since it does not -// understand Bourne shell grammer. It does handle pipes, redirects, and job -// control though. Adding in command editing makes it very nice lightweight -// command prompt. -//#define BB_FEATURE_LASH -// -// hush is also quite small (just 18k) and it has very complete Bourne shell -// grammer. It handles if/then/else/fi just fine, but doesn't handle loops -// like for/do/done or case/esac and such. It also currently has a problem -// with job control. -//#define BB_FEATURE_HUSH -// -// msh: The minix shell (adds just 30k) is quite complete and handles things -// like for/do/done, case/esac and all the things you expect a Bourne shell to -// do. It is not always pedantically correct about Bourne shell grammer (try -// running the shell testscript "tests/sh.testcases" on it and compare vs -// bash) but for most things it works quite well. It also uses only vfork, so -// it can be used on uClinux systems. This was only recently added, so there is -// still room to shrink it further... -#define BB_FEATURE_MSH -// -// ash: This adds about 60k in the default configuration and is the most -// complete and most pedantically correct shell included with busybox. This -// shell was also recently added, and several people (mainly Vladimir and Erik) -// have been working on it. There are a number of configurable things at the -// top of ash.c as well, so check those out if you want to tweak things. The -// Posix math support is currently disabled (that bit of code was horrible) but -// will be restored for the next BusyBox release. -//#define BB_FEATURE_ASH +// If you enabled one or more of the shells, you may select which one +// should be run when sh is invoked: +//#define BB_FEATURE_SH_IS_ASH +//#define BB_FEATURE_SH_IS_HUSH +//#define BB_FEATURE_SH_IS_LASH +#define BB_FEATURE_SH_IS_MSH // // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have @@ -283,11 +258,11 @@ #define BB_FEATURE_SORT_UNIQUE // // Enable command line editing in the shell. -// Only relevant if BB_SH is enabled. On by default. +// Only relevant if a shell is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING // // Enable tab completion in the shell. This is now working quite nicely. -// This feature adds a bit over 4k. Only relevant if BB_SH is enabled. +// This feature adds a bit over 4k. Only relevant if a shell is enabled. #define BB_FEATURE_COMMAND_TAB_COMPLETION // // Attempts to match usernames in a ~-prefixed path @@ -296,7 +271,7 @@ //Allow the shell to invoke all the compiled in BusyBox applets as if they //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path @@ -305,13 +280,13 @@ //will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ //busybox. Some systems want this, others do not. Choose wisely. :-) This //only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. -// Only relevant if BB_SH is enabled. Off by default. +// Only relevant if a shell is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // // Uncomment this option for a fancy shell prompt that includes the // current username and hostname. On systems that don't have usernames // or hostnames, this can look hideous. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options @@ -416,8 +391,8 @@ // Nothing beyond this point should ever be touched by // mere mortals so leave this stuff alone. // -#if defined BB_SH - #if defined BB_FEATURE_COMMAND_EDITING +#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH + #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT #else #undef BB_FEATURE_COMMAND_EDITING @@ -482,3 +457,17 @@ #define BB_LOGREAD #endif #endif +// +#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH +# define BB_SH +# define shell_main ash_main +#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH +# define BB_SH +# define shell_main hush_main +#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH +# define BB_SH +# define shell_main lash_main +#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH +# define BB_SH +# define shell_main msh_main +#endif diff --git a/debian/Config.h-static b/debian/Config.h-static index e049b5aa2..a538b1a63 100644 --- a/debian/Config.h-static +++ b/debian/Config.h-static @@ -9,6 +9,7 @@ // BusyBox Applications //#define BB_ADJTIMEX #define BB_AR +#define BB_ASH #define BB_BASENAME #define BB_CAT #define BB_CHGRP @@ -51,6 +52,7 @@ #define BB_HEAD #define BB_HOSTID #define BB_HOSTNAME +#define BB_HUSH #define BB_ID #define BB_IFCONFIG #define BB_INIT @@ -58,6 +60,7 @@ #define BB_KILL #define BB_KILLALL #define BB_KLOGD +#define BB_LASH #define BB_LENGTH #define BB_LN #define BB_LOADACM @@ -78,6 +81,7 @@ #define BB_NC #define BB_MORE #define BB_MOUNT +#define BB_MSH #define BB_MT #define BB_MV #define BB_NSLOOKUP @@ -99,7 +103,6 @@ #define BB_RPM2CPIO #define BB_SED #define BB_SETKEYCODES -#define BB_SH #define BB_SLEEP #define BB_SORT #define BB_STTY @@ -143,40 +146,12 @@ // pretty/useful). // // -// If you enabled BB_SH above, you may select one of the following shells. -// You can only select ONE of the following shells. Sorry. -// -// lash is the very smallest shell (adds just 10k) and it is quite usable as a -// command prompt, but it is not suitable for any but the most trivial scripting -// (such as an initrd that calls insmod a few times) since it does not -// understand Bourne shell grammer. It does handle pipes, redirects, and job -// control though. Adding in command editing makes it very nice lightweight -// command prompt. -//#define BB_FEATURE_LASH -// -// hush is also quite small (just 18k) and it has very complete Bourne shell -// grammer. It handles if/then/else/fi just fine, but doesn't handle loops -// like for/do/done or case/esac and such. It also currently has a problem -// with job control. -//#define BB_FEATURE_HUSH -// -// msh: The minix shell (adds just 30k) is quite complete and handles things -// like for/do/done, case/esac and all the things you expect a Bourne shell to -// do. It is not always pedantically correct about Bourne shell grammer (try -// running the shell testscript "tests/sh.testcases" on it and compare vs -// bash) but for most things it works quite well. It also uses only vfork, so -// it can be used on uClinux systems. This was only recently added, so there is -// still room to shrink it further... -//#define BB_FEATURE_MSH -// -// ash: This adds about 60k in the default configuration and is the most -// complete and most pedantically correct shell included with busybox. This -// shell was also recently added, and several people (mainly Vladimir and Erik) -// have been working on it. There are a number of configurable things at the -// top of ash.c as well, so check those out if you want to tweak things. The -// Posix math support is currently disabled (that bit of code was horrible) but -// will be restored for the next BusyBox release. -#define BB_FEATURE_ASH +// If you enabled one or more of the shells, you may select which one +// should be run when sh is invoked: +//#define BB_FEATURE_SH_IS_ASH +//#define BB_FEATURE_SH_IS_HUSH +//#define BB_FEATURE_SH_IS_LASH +#define BB_FEATURE_SH_IS_MSH // // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have @@ -283,11 +258,11 @@ #define BB_FEATURE_SORT_UNIQUE // // Enable command line editing in the shell. -// Only relevant if BB_SH is enabled. On by default. +// Only relevant if a shell is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING // // Enable tab completion in the shell. This is now working quite nicely. -// This feature adds a bit over 4k. Only relevant if BB_SH is enabled. +// This feature adds a bit over 4k. Only relevant if a shell is enabled. #define BB_FEATURE_COMMAND_TAB_COMPLETION // // Attempts to match usernames in a ~-prefixed path @@ -296,7 +271,7 @@ //Allow the shell to invoke all the compiled in BusyBox applets as if they //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. #define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path @@ -305,13 +280,13 @@ //will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ //busybox. Some systems want this, others do not. Choose wisely. :-) This //only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. -// Only relevant if BB_SH is enabled. Off by default. +// Only relevant if a shell is enabled. Off by default. #define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // // Uncomment this option for a fancy shell prompt that includes the // current username and hostname. On systems that don't have usernames // or hostnames, this can look hideous. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. #define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options @@ -416,8 +391,8 @@ // Nothing beyond this point should ever be touched by // mere mortals so leave this stuff alone. // -#if defined BB_SH - #if defined BB_FEATURE_COMMAND_EDITING +#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH + #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT #else #undef BB_FEATURE_COMMAND_EDITING @@ -482,3 +457,17 @@ #define BB_LOGREAD #endif #endif +// +#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH +# define BB_SH +# define shell_main ash_main +#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH +# define BB_SH +# define shell_main hush_main +#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH +# define BB_SH +# define shell_main lash_main +#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH +# define BB_SH +# define shell_main msh_main +#endif diff --git a/debian/Config.h-udeb b/debian/Config.h-udeb index dfc32f655..172d3dc75 100644 --- a/debian/Config.h-udeb +++ b/debian/Config.h-udeb @@ -9,6 +9,7 @@ // BusyBox Applications //#define BB_ADJTIMEX //#define BB_AR +//#define BB_ASH #define BB_BASENAME #define BB_CAT #define BB_CHGRP @@ -51,6 +52,7 @@ #define BB_HEAD //#define BB_HOSTID //#define BB_HOSTNAME +//#define BB_HUSH #define BB_ID //#define BB_IFCONFIG #define BB_INIT @@ -58,6 +60,7 @@ #define BB_KILL #define BB_KILLALL #define BB_KLOGD +//#define BB_LASH //#define BB_LENGTH #define BB_LN //#define BB_LOADACM @@ -78,6 +81,7 @@ //#define BB_NC #define BB_MORE #define BB_MOUNT +//#define BB_MSH //#define BB_MT #define BB_MV //#define BB_NSLOOKUP @@ -99,7 +103,6 @@ //#define BB_RPM2CPIO #define BB_SED //#define BB_SETKEYCODES -//#define BB_SH #define BB_SLEEP #define BB_SORT //#define BB_STTY @@ -143,40 +146,12 @@ // pretty/useful). // // -// If you enabled BB_SH above, you may select one of the following shells. -// You can only select ONE of the following shells. Sorry. -// -// lash is the very smallest shell (adds just 10k) and it is quite usable as a -// command prompt, but it is not suitable for any but the most trivial scripting -// (such as an initrd that calls insmod a few times) since it does not -// understand Bourne shell grammer. It does handle pipes, redirects, and job -// control though. Adding in command editing makes it very nice lightweight -// command prompt. -//#define BB_FEATURE_LASH -// -// hush is also quite small (just 18k) and it has very complete Bourne shell -// grammer. It handles if/then/else/fi just fine, but doesn't handle loops -// like for/do/done or case/esac and such. It also currently has a problem -// with job control. -//#define BB_FEATURE_HUSH -// -// msh: The minix shell (adds just 30k) is quite complete and handles things -// like for/do/done, case/esac and all the things you expect a Bourne shell to -// do. It is not always pedantically correct about Bourne shell grammer (try -// running the shell testscript "tests/sh.testcases" on it and compare vs -// bash) but for most things it works quite well. It also uses only vfork, so -// it can be used on uClinux systems. This was only recently added, so there is -// still room to shrink it further... -#define BB_FEATURE_MSH -// -// ash: This adds about 60k in the default configuration and is the most -// complete and most pedantically correct shell included with busybox. This -// shell was also recently added, and several people (mainly Vladimir and Erik) -// have been working on it. There are a number of configurable things at the -// top of ash.c as well, so check those out if you want to tweak things. The -// Posix math support is currently disabled (that bit of code was horrible) but -// will be restored for the next BusyBox release. -//#define BB_FEATURE_ASH +// If you enabled one or more of the shells, you may select which one +// should be run when sh is invoked: +//#define BB_FEATURE_SH_IS_ASH +//#define BB_FEATURE_SH_IS_HUSH +//#define BB_FEATURE_SH_IS_LASH +#define BB_FEATURE_SH_IS_MSH // // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have @@ -283,11 +258,11 @@ #define BB_FEATURE_SORT_UNIQUE // // Enable command line editing in the shell. -// Only relevant if BB_SH is enabled. On by default. +// Only relevant if a shell is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING // // Enable tab completion in the shell. This is now working quite nicely. -// This feature adds a bit over 4k. Only relevant if BB_SH is enabled. +// This feature adds a bit over 4k. Only relevant if a shell is enabled. #define BB_FEATURE_COMMAND_TAB_COMPLETION // // Attempts to match usernames in a ~-prefixed path @@ -296,7 +271,7 @@ //Allow the shell to invoke all the compiled in BusyBox applets as if they //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path @@ -305,13 +280,13 @@ //will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ //busybox. Some systems want this, others do not. Choose wisely. :-) This //only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. -// Only relevant if BB_SH is enabled. Off by default. +// Only relevant if a shell is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // // Uncomment this option for a fancy shell prompt that includes the // current username and hostname. On systems that don't have usernames // or hostnames, this can look hideous. -// Only relevant if BB_SH is enabled. +// Only relevant if a shell is enabled. //#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options @@ -416,8 +391,8 @@ // Nothing beyond this point should ever be touched by // mere mortals so leave this stuff alone. // -#if defined BB_SH - #if defined BB_FEATURE_COMMAND_EDITING +#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH + #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT #else #undef BB_FEATURE_COMMAND_EDITING @@ -482,3 +457,17 @@ #define BB_LOGREAD #endif #endif +// +#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH +# define BB_SH +# define shell_main ash_main +#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH +# define BB_SH +# define shell_main hush_main +#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH +# define BB_SH +# define shell_main lash_main +#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH +# define BB_SH +# define shell_main msh_main +#endif diff --git a/hush.c b/hush.c index 134404251..0e619f80e 100644 --- a/hush.c +++ b/hush.c @@ -112,7 +112,7 @@ #else #define applet_name "hush" #include "standalone.h" -#define shell_main main +#define hush_main main #undef BB_FEATURE_SH_FANCY_PROMPT #endif @@ -2562,7 +2562,7 @@ static void setup_job_control() tcsetpgrp(shell_terminal, shell_pgrp); } -int shell_main(int argc, char **argv) +int hush_main(int argc, char **argv) { int opt; FILE *input; @@ -2572,8 +2572,8 @@ int shell_main(int argc, char **argv) global_argc = argc; global_argv = argv; - /* (re?) initialize globals. Sometimes shell_main() ends up calling - * shell_main(), therefore we cannot rely on the BSS to zero out this + /* (re?) initialize globals. Sometimes hush_main() ends up calling + * hush_main(), therefore we cannot rely on the BSS to zero out this * stuff. Reset these to 0 every time. */ ifs = NULL; /* map[] is taken care of with call to update_ifs_map() */ diff --git a/include/applets.h b/include/applets.h index 0786c39eb..184bce09b 100644 --- a/include/applets.h +++ b/include/applets.h @@ -52,6 +52,9 @@ #ifdef BB_AR APPLET(ar, ar_main, _BB_DIR_USR_BIN) #endif +#ifdef BB_ASH + APPLET_NOUSAGE("ash", ash_main, _BB_DIR_BIN) +#endif #ifdef BB_BASENAME APPLET(basename, basename_main, _BB_DIR_USR_BIN) #endif @@ -185,6 +188,9 @@ #ifdef BB_HOSTNAME APPLET(hostname, hostname_main, _BB_DIR_BIN) #endif +#ifdef BB_HUSH + APPLET_NOUSAGE("hush", hush_main, _BB_DIR_BIN) +#endif #ifdef BB_ID APPLET(id, id_main, _BB_DIR_USR_BIN) #endif @@ -206,6 +212,9 @@ #ifdef BB_KLOGD APPLET(klogd, klogd_main, _BB_DIR_SBIN) #endif +#ifdef BB_LASH + APPLET(lash, lash_main, _BB_DIR_BIN) +#endif #ifdef BB_LENGTH APPLET(length, length_main, _BB_DIR_USR_BIN) #endif @@ -272,6 +281,9 @@ #ifdef BB_MOUNT APPLET(mount, mount_main, _BB_DIR_BIN) #endif +#ifdef BB_MSH + APPLET_NOUSAGE("msh", msh_main, _BB_DIR_BIN) +#endif #ifdef BB_MT APPLET(mt, mt_main, _BB_DIR_BIN) #endif @@ -344,8 +356,14 @@ #ifdef BB_SETKEYCODES APPLET(setkeycodes, setkeycodes_main, _BB_DIR_USR_BIN) #endif -#ifdef BB_SH - APPLET(sh, shell_main, _BB_DIR_BIN) +#ifdef BB_FEATURE_SH_IS_ASH + APPLET_NOUSAGE("sh", ash_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_HUSH) + APPLET_NOUSAGE("sh", hush_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_LASH) + APPLET_NOUSAGE("sh", lash_main, _BB_DIR_BIN) +#elif defined(BB_FEATURE_SH_IS_MSH) + APPLET_NOUSAGE("sh", msh_main, _BB_DIR_BIN) #endif #ifdef BB_SLEEP APPLET(sleep, sleep_main, _BB_DIR_BIN) diff --git a/include/usage.h b/include/usage.h index 08da42b27..13759d23f 100644 --- a/include/usage.h +++ b/include/usage.h @@ -1365,12 +1365,12 @@ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" -#define sh_trivial_usage \ +#define lash_trivial_usage \ "[FILE]...\n" \ "or: sh -c command [args]..." -#define sh_full_usage \ +#define lash_full_usage \ "lash: The BusyBox LAme SHell (command interpreter)" -#define sh_notes_usage \ +#define lash_notes_usage \ "This command does not yet have proper documentation.\n" \ "\n" \ "Use lash just as you would use any other shell. It properly handles pipes,\n" \ diff --git a/lash.c b/lash.c index 8f8609534..0af669116 100644 --- a/lash.c +++ b/lash.c @@ -1545,7 +1545,7 @@ static void setup_job_control() tcsetpgrp(shell_terminal, shell_pgrp); } -int shell_main(int argc_l, char **argv_l) +int lash_main(int argc_l, char **argv_l) { int opt, interactive=FALSE; FILE *input = stdin; diff --git a/msh.c b/msh.c index 8f046e794..92a0f8536 100644 --- a/msh.c +++ b/msh.c @@ -143,7 +143,7 @@ static int newfile(char *s); static char *findeq(char *cp); static char *cclass(char *p, int sub); static void initarea(void); -extern int shell_main(int argc, char **argv); +extern int msh_main(int argc, char **argv); struct brkcon { @@ -692,7 +692,7 @@ static char * current_prompt; */ -extern int shell_main(int argc, char **argv) +extern int msh_main(int argc, char **argv) { register int f; register char *s; diff --git a/sh.c b/sh.c deleted file mode 100644 index f5c06b423..000000000 --- a/sh.c +++ /dev/null @@ -1,48 +0,0 @@ -/* vi: set sw=4 ts=4: */ -/* - * Shell wrapper file for busybox - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include "Config.h" - -/* This is to make testing things a bit simpler (to avoid - * a full recompile) till we get the new build system in place */ -#if 0 -#undef BB_FEATURE_LASH -#undef BB_FEATURE_HUSH -#undef BB_FEATURE_MSH -#define BB_FEATURE_ASH -#endif - -#if defined BB_FEATURE_ASH -#include "ash.c" -#elif defined BB_FEATURE_MSH -#include "msh.c" -#elif defined BB_FEATURE_HUSH -#include "hush.c" -#elif defined BB_FEATURE_LASH -#include "lash.c" -#endif - -/* -Local Variables: -c-file-style: "linux" -c-basic-offset: 4 -tab-width: 4 -End: -*/ diff --git a/shell/ash.c b/shell/ash.c index 15e1adb7c..b1aec6278 100644 --- a/shell/ash.c +++ b/shell/ash.c @@ -7638,7 +7638,7 @@ static void procargs (int, char **); */ int -shell_main(argc, argv) +ash_main(argc, argv) int argc; char **argv; { @@ -12874,7 +12874,7 @@ findvar(struct var **vpp, const char *name) /* * Copyright (c) 1999 Herbert Xu * This file contains code for the times builtin. - * $Id: ash.c,v 1.15 2001/07/31 21:38:23 andersen Exp $ + * $Id: ash.c,v 1.16 2001/08/01 17:21:33 kraai Exp $ */ static int timescmd (int argc, char **argv) { diff --git a/shell/hush.c b/shell/hush.c index 134404251..0e619f80e 100644 --- a/shell/hush.c +++ b/shell/hush.c @@ -112,7 +112,7 @@ #else #define applet_name "hush" #include "standalone.h" -#define shell_main main +#define hush_main main #undef BB_FEATURE_SH_FANCY_PROMPT #endif @@ -2562,7 +2562,7 @@ static void setup_job_control() tcsetpgrp(shell_terminal, shell_pgrp); } -int shell_main(int argc, char **argv) +int hush_main(int argc, char **argv) { int opt; FILE *input; @@ -2572,8 +2572,8 @@ int shell_main(int argc, char **argv) global_argc = argc; global_argv = argv; - /* (re?) initialize globals. Sometimes shell_main() ends up calling - * shell_main(), therefore we cannot rely on the BSS to zero out this + /* (re?) initialize globals. Sometimes hush_main() ends up calling + * hush_main(), therefore we cannot rely on the BSS to zero out this * stuff. Reset these to 0 every time. */ ifs = NULL; /* map[] is taken care of with call to update_ifs_map() */ diff --git a/shell/lash.c b/shell/lash.c index 8f8609534..0af669116 100644 --- a/shell/lash.c +++ b/shell/lash.c @@ -1545,7 +1545,7 @@ static void setup_job_control() tcsetpgrp(shell_terminal, shell_pgrp); } -int shell_main(int argc_l, char **argv_l) +int lash_main(int argc_l, char **argv_l) { int opt, interactive=FALSE; FILE *input = stdin; diff --git a/shell/msh.c b/shell/msh.c index 8f046e794..92a0f8536 100644 --- a/shell/msh.c +++ b/shell/msh.c @@ -143,7 +143,7 @@ static int newfile(char *s); static char *findeq(char *cp); static char *cclass(char *p, int sub); static void initarea(void); -extern int shell_main(int argc, char **argv); +extern int msh_main(int argc, char **argv); struct brkcon { @@ -692,7 +692,7 @@ static char * current_prompt; */ -extern int shell_main(int argc, char **argv) +extern int msh_main(int argc, char **argv) { register int f; register char *s; diff --git a/usage.h b/usage.h index 08da42b27..13759d23f 100644 --- a/usage.h +++ b/usage.h @@ -1365,12 +1365,12 @@ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" -#define sh_trivial_usage \ +#define lash_trivial_usage \ "[FILE]...\n" \ "or: sh -c command [args]..." -#define sh_full_usage \ +#define lash_full_usage \ "lash: The BusyBox LAme SHell (command interpreter)" -#define sh_notes_usage \ +#define lash_notes_usage \ "This command does not yet have proper documentation.\n" \ "\n" \ "Use lash just as you would use any other shell. It properly handles pipes,\n" \ -- 2.25.1