From 2d1951fec6bd7dc50963043f24ae73a86b4292e1 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Thu, 1 Jun 2017 18:01:31 +0800 Subject: [PATCH] rockchip: Add basic support for evb-rv1108 board Add basic support for rv1108 evb, whith this patch we can boot into u-boot console. Signed-off-by: Andy Yan Reviewed-by: Simon Glass --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/rv1108-evb.dts | 54 +++ arch/arm/dts/rv1108.dtsi | 479 +++++++++++++++++++++++++ arch/arm/mach-rockchip/rv1108/Kconfig | 19 + board/rockchip/evb_rv1108/Kconfig | 15 + board/rockchip/evb_rv1108/MAINTAINERS | 6 + board/rockchip/evb_rv1108/Makefile | 7 + board/rockchip/evb_rv1108/README | 47 +++ board/rockchip/evb_rv1108/evb_rv1108.c | 52 +++ configs/evb-rv1108_defconfig | 40 +++ include/configs/evb_rv1108.h | 26 ++ 11 files changed, 747 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rv1108-evb.dts create mode 100644 arch/arm/dts/rv1108.dtsi create mode 100644 board/rockchip/evb_rv1108/Kconfig create mode 100644 board/rockchip/evb_rv1108/MAINTAINERS create mode 100644 board/rockchip/evb_rv1108/Makefile create mode 100644 board/rockchip/evb_rv1108/README create mode 100644 board/rockchip/evb_rv1108/evb_rv1108.c create mode 100644 configs/evb-rv1108_defconfig create mode 100644 include/configs/evb_rv1108.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cbfe17dd0a..4d8a56aea8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -46,7 +46,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3368-px5-evb.dtb \ rk3399-evb.dtb \ rk3399-firefly.dtb \ - rk3399-puma.dtb + rk3399-puma.dtb \ + rv1108-evb.dtb dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-odroidc2.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/dts/rv1108-evb.dts b/arch/arm/dts/rv1108-evb.dts new file mode 100644 index 0000000000..0128dd8b1d --- /dev/null +++ b/arch/arm/dts/rv1108-evb.dts @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Rockchip RV1108 Evaluation board"; + compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&gmac { + status = "okay"; + clock_in_out = <0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; +}; + +&sfc { + status = "okay"; + flash@0 { + compatible = "gd25q256","spi-flash"; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + spi-max-frequency = <96000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/dts/rv1108.dtsi b/arch/arm/dts/rv1108.dtsi new file mode 100644 index 0000000000..77ca24e7f3 --- /dev/null +++ b/arch/arm/dts/rv1108.dtsi @@ -0,0 +1,479 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rv1108"; + + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + spi0 = &sfc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + ; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + }; + + uart2: serial@10210000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10210000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart1: serial@10220000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10220000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart0: serial@10230000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + grf: syscon@10300000 { + compatible = "rockchip,rv1108-grf", "syscon"; + reg = <0x10300000 0x1000>; + }; + + pmugrf: syscon@20060000 { + compatible = "rockchip,rv1108-pmugrf", "syscon"; + reg = <0x20060000 0x1000>; + }; + + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + emmc: dwmmc@30110000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30110000 0x4000>; + status = "disabled"; + }; + + sdio: dwmmc@30120000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30120000 0x4000>; + status = "disabled"; + }; + + sdmmc: dwmmc@30130000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 100000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + reg = <0x30130000 0x4000>; + status = "disabled"; + }; + + sfc: sfc@301c0000 { + compatible = "rockchip,sfc"; + reg = <0x301c0000 0x200>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + gmac: ethernet@30200000 { + compatible = "rockchip,rv1108-gmac"; + reg = <0x30200000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + phy-mode = "rmii"; + max-speed = <100>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x1000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = ; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rv1108-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20030000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20030000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@10310000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10310000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@10320000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10320000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@10330000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10330000 0x100>; + interrupts = ; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { + drive-strength = <4>; + }; + + pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + i2c2m1 { + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + }; + + i2c2m1_gpio: i2c2m1-gpio { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c2m05v { + i2c2m05v_xfer: i2c2m05v-xfer { + rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + }; + + i2c2m05v_gpio: i2c2m05v-gpio { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sfc { + sfc_pins: sfc-pins { + rockchip,pins = <2 RK_PA3 RK_FUNC_3 &pcfg_pull_none>, + <2 RK_PA2 RK_FUNC_3 &pcfg_pull_none>, + <2 RK_PA1 RK_FUNC_3 &pcfg_pull_none>, + <2 RK_PA0 RK_FUNC_3 &pcfg_pull_none>, + <2 RK_PB7 RK_FUNC_2 &pcfg_pull_none>, + <2 RK_PB4 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart01rts: uart1-rts { + rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2_5v { + uart2_5v_cts: uart2_5v-cts { + rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_5v_rts: uart2_5v-rts { + rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm/mach-rockchip/rv1108/Kconfig b/arch/arm/mach-rockchip/rv1108/Kconfig index 40237bb8b7..e6cba66578 100644 --- a/arch/arm/mach-rockchip/rv1108/Kconfig +++ b/arch/arm/mach-rockchip/rv1108/Kconfig @@ -1,9 +1,28 @@ if ROCKCHIP_RV1108 +config TARGET_EVB_RV1108 + bool "EVB_RV1108" + help + RV1108 EVB is a evaluation board for Rockchp RV1108. + + Key features of the board include: + * one macro USB OTG port + * one USB HOST port + * one RS232 to USB port route to UART2 as debug port + * MIPI screen with resolution 720 x 1280 + * 128M DDR3 + * 64M SPI Nor Flash + * macro SD card interface + * HDMI output + * 10/100 Mbps Ethernet + * camera interface compatible with imx323 / ov2710 / ov4689 + config SYS_SOC default "rockchip" config SYS_MALLOC_F_LEN default 0x400 +source board/rockchip/evb_rv1108/Kconfig + endif diff --git a/board/rockchip/evb_rv1108/Kconfig b/board/rockchip/evb_rv1108/Kconfig new file mode 100644 index 0000000000..4a76e0b9fa --- /dev/null +++ b/board/rockchip/evb_rv1108/Kconfig @@ -0,0 +1,15 @@ +if TARGET_EVB_RV1108 + +config SYS_BOARD + default "evb_rv1108" + +config SYS_VENDOR + default "rockchip" + +config SYS_CONFIG_NAME + default "evb_rv1108" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/rockchip/evb_rv1108/MAINTAINERS b/board/rockchip/evb_rv1108/MAINTAINERS new file mode 100644 index 0000000000..94def320c4 --- /dev/null +++ b/board/rockchip/evb_rv1108/MAINTAINERS @@ -0,0 +1,6 @@ +EVB-RV1108 +M: Andy Yan +S: Maintained +F: board/rockchip/evb_rv1108 +F: include/configs/evb_rv1108.h +F: configs/evb-rv1108_defconfig diff --git a/board/rockchip/evb_rv1108/Makefile b/board/rockchip/evb_rv1108/Makefile new file mode 100644 index 0000000000..dd99054d56 --- /dev/null +++ b/board/rockchip/evb_rv1108/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2016 Rockchip Electronics Co., Ltd +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += evb_rv1108.o diff --git a/board/rockchip/evb_rv1108/README b/board/rockchip/evb_rv1108/README new file mode 100644 index 0000000000..58895960e9 --- /dev/null +++ b/board/rockchip/evb_rv1108/README @@ -0,0 +1,47 @@ +Here is the step-by-step to boot U-Boot on rv1108 evb. + +Get ddr init binary +============================================================================== + > git clone https://github.com/rockchip-linux/rkbin.git + > dd if=./rkbin/rv1x/rv1108ddr.bin of=ddr.bin bs=4 skip=1 + +Compile U-Boot +=========================== + > make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig all + > ./tools/mkimage -n rv1108 -T rksd -d ddr.bin spl.bin + > cat spl.bin u-boot.bin > u-boot.img + +Flash the image by rkdeveloptool +================================ +rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git + +Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: + > rkdeveloptool db ./rkbin/rv1x/RV1108_usb_boot.bin + > rkdeveloptool wl 0x40 u-boot.img + > rkdeveloptool RD + +You should be able to get U-Boot log message from boot console: + +DDR Version V1.02 20170220 +In +400MHz +DDR3 +Bus Width=16 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=512MB +mach:2 +OUT + + +U-Boot 2017.05-00693-g3a5b171 (Jun 01 2017 - 17:37:53 +0800) + +Model: Rockchip RV1108 Evaluation board +DRAM: 128 MiB +APLL: 600000000 DPLL:792000000 GPLL:384000000 +MMC: +Using default environment + +In: serial@10210000 +Out: serial@10210000 +Err: serial@10210000 +Net: No ethernet found. +Hit any key to stop autoboot: 0 +=> diff --git a/board/rockchip/evb_rv1108/evb_rv1108.c b/board/rockchip/evb_rv1108/evb_rv1108.c new file mode 100644 index 0000000000..fe37eac420 --- /dev/null +++ b/board/rockchip/evb_rv1108/evb_rv1108.c @@ -0,0 +1,52 @@ +/* + * (C)Copyright 2016 Rockchip Electronics Co., Ltd + * Authors: Andy Yan + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int mach_cpu_init(void) +{ + int node; + struct rv1108_grf *grf; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rv1108-grf"); + grf = (struct rv1108_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); + + /*evb board use UART2 m0 for debug*/ + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D2_MASK | GPIO2D1_MASK, + GPIO2D2_UART2_SOUT_M0 << GPIO2D2_SHIFT | + GPIO2D1_UART2_SIN_M0 << GPIO2D1_SHIFT); + rk_clrreg(&grf->gpio3c_iomux, GPIO3C3_MASK | GPIO3C2_MASK); + + return 0; +} + + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + gd->ram_size = 0x8000000; + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = 0x60000000; + gd->bd->bi_dram[0].size = 0x8000000; + + return 0; +} diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig new file mode 100644 index 0000000000..3fa1ae82f5 --- /dev/null +++ b/configs/evb-rv1108_defconfig @@ -0,0 +1,40 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ROCKCHIP_RV1108=y +CONFIG_TARGET_EVB_RV1108=y +CONFIG_DEFAULT_DEVICE_TREE="rv1108-evb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RV1108=y +CONFIG_RAM=y +CONFIG_BAUDRATE=1500000 +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0x10210000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/evb_rv1108.h b/include/configs/evb_rv1108.h new file mode 100644 index 0000000000..ff3531b321 --- /dev/null +++ b/include/configs/evb_rv1108.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ipaddr=172.16.12.50\0" \ + "serverip=172.16.12.69\0" \ + "" +#define CONFIG_BOOTCOMMAND \ + "sf probe;" \ + "sf read 0x62000000 0x140800 0x500000;" \ + "dcache off;" \ + "go 0x62000000" + +#endif -- 2.25.1