From 2c84d5218e7e379dce493080a01938530b477611 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 18 Jun 2018 06:03:57 +0200 Subject: [PATCH] ARM: dts: rmobile: Add HS200 support to E3 Ebisu Add regulator nodes and pinmux settings to the SDHI3 on E3 Ebisu and enable HS200 mode on it. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/r8a77990-ebisu.dts | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm/dts/r8a77990-ebisu.dts b/arch/arm/dts/r8a77990-ebisu.dts index 1946999874..8b0d24bd29 100644 --- a/arch/arm/dts/r8a77990-ebisu.dts +++ b/arch/arm/dts/r8a77990-ebisu.dts @@ -28,6 +28,24 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &avb { @@ -71,6 +89,18 @@ groups = "scif_clk_a"; function = "scif_clk"; }; + + sdhi3_pins: sd2 { + groups = "sdhi3_data8", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sdhi3_pins_uhs: sd2_uhs { + groups = "sdhi3_data8", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; }; &sdhi0 { @@ -82,7 +112,15 @@ }; &sdhi3 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; bus-width = <8>; + mmc-hs200-1_8v; non-removable; status = "okay"; }; -- 2.25.1