From 2c4c6d135b8d342cb257690ebe6729d325afc68c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 15 Sep 2014 10:19:01 +0000 Subject: [PATCH] ar71xx: refactor ubnt xw board setup Signed-off-by: Alexander Couzens SVN-Revision: 42548 --- .../patches-3.10/616-MIPS-ath79-ubnt-xw.patch | 28 +++++++++++++------ 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch index ed2fd246ef..9413bd8c45 100644 --- a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch +++ b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch @@ -1,6 +1,8 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo +Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c +=================================================================== +--- linux-3.10.49.orig/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:55:37.890080659 +0200 ++++ linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:58:31.061570912 +0200 +@@ -332,3 +332,67 @@ MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", ubnt_uap_pro_setup); @@ -29,7 +31,7 @@ + }, +}; + -+static void __init ubnt_nano_m_xw_setup(void) ++static void __init ubnt_xw_init(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + @@ -44,26 +46,36 @@ + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + -+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + -+ /* GMAC0 is connected to an AR8326 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++} ++ ++static void __init ubnt_nano_m_xw_setup(void) ++{ ++ ubnt_xw_init(); ++ ++ /* GMAC0 is connected to an AR8326 switch */ ++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); + ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", + ubnt_nano_m_xw_setup); ++ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -124,6 +124,7 @@ enum ath79_mach_type { +@@ -121,9 +121,10 @@ enum ath79_mach_type { + ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ + ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -- 2.25.1