From 286ded3394e99af037458e28617f6986f338fcbd Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 9 Oct 2018 13:13:57 +0200 Subject: [PATCH] ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/salvator-common.dtsi | 10 ++++++++++ arch/arm/dts/ulcb.dtsi | 5 +++++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 074022aedf..88ce5f2449 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -618,8 +618,13 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + + max-frequency = <208000000>; }; &sdhi2 { @@ -635,6 +640,7 @@ non-removable; fixed-emmc-driver-type = <1>; status = "okay"; + max-frequency = <200000000>; }; &sdhi3 { @@ -647,8 +653,12 @@ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + max-frequency = <208000000>; }; &ssi1 { diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi index 96a0e08874..256553f604 100644 --- a/arch/arm/dts/ulcb.dtsi +++ b/arch/arm/dts/ulcb.dtsi @@ -396,8 +396,12 @@ vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + max-frequency = <208000000>; }; &sdhi2 { @@ -412,6 +416,7 @@ mmc-hs200-1_8v; non-removable; status = "okay"; + max-frequency = <200000000>; }; &ssi1 { -- 2.25.1