From 27084c03d36a7f0e4d7c1679761e81567f1d5442 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 25 Sep 2019 08:56:27 -0600 Subject: [PATCH] spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- arch/arm/Kconfig | 2 +- arch/arm/mach-omap2/Kconfig | 6 +++--- arch/arm/mach-rmobile/Kconfig | 2 +- arch/arm/mach-rmobile/Kconfig.32 | 14 ++++++------- arch/arm/mach-socfpga/Kconfig | 4 ++-- common/spl/Kconfig | 2 +- common/xyzModem.c | 2 +- configs/am335x_pdu001_defconfig | 2 +- configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_nand_defconfig | 2 +- .../ls1043ardb_sdcard_SECURE_BOOT_defconfig | 2 +- configs/ls1043ardb_sdcard_defconfig | 2 +- configs/sandbox_spl_defconfig | 2 +- drivers/gpio/gpio-uclass.c | 4 ++-- drivers/mmc/mmc.c | 2 +- drivers/mtd/spi/sf-uclass.c | 2 +- lib/Kconfig | 20 +++++++++++++++---- lib/Makefile | 2 +- 18 files changed, 43 insertions(+), 31 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3b0e315061..7086db368f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -954,7 +954,7 @@ config ARCH_SUNXI select USB if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM imply CMD_GPT imply CMD_UBI if NAND diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ed8056e871..4c87cbc00f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,7 @@ config OMAP34XX select ARM_ERRATA_454179 select ARM_ERRATA_621766 select ARM_ERRATA_725233 - select USE_TINY_PRINTF if SPL + select SPL_USE_TINY_PRINTF if SPL imply NAND_OMAP_GPMC imply SPL_FS_EXT4 imply SPL_FS_FAT @@ -31,7 +31,7 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply NAND_OMAP_ELM imply NAND_OMAP_GPMC imply SPL_DISPLAY_PRINT @@ -124,7 +124,7 @@ config AM33XX imply SPL_NAND_SUPPORT imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD - imply USE_TINY_PRINTF + imply SPL_USE_TINY_PRINTF help Support for AM335x SOC from Texas Instruments. The AM335x high performance SOC features a Cortex-A8 diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig index 52ab891425..8343000c8f 100644 --- a/arch/arm/mach-rmobile/Kconfig +++ b/arch/arm/mach-rmobile/Kconfig @@ -32,7 +32,7 @@ config RCAR_GEN3 imply SPL_SYS_MALLOC_SIMPLE imply SPL_TINY_MEMSET imply SPL_YMODEM_SUPPORT - imply USE_TINY_PRINTF + imply SPL_USE_TINY_PRINTF config RZA1 prompt "Renesas ARM SoCs RZ/A1 (32bit)" diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index 1441c80692..d5e437f0d2 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -65,7 +65,7 @@ config TARGET_GOSE select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_KOELSCH @@ -74,7 +74,7 @@ config TARGET_KOELSCH select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_LAGER @@ -83,7 +83,7 @@ config TARGET_LAGER select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_KZM9G @@ -95,7 +95,7 @@ config TARGET_ALT select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_SILK @@ -104,7 +104,7 @@ config TARGET_SILK select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_PORTER @@ -113,7 +113,7 @@ config TARGET_PORTER select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM config TARGET_STOUT @@ -122,7 +122,7 @@ config TARGET_STOUT select DM_SERIAL select SPL_TINY_MEMSET select SUPPORT_SPL - select USE_TINY_PRINTF + select SPL_USE_TINY_PRINTF imply CMD_DM endchoice diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 1d914648e3..ee79953fcc 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -45,7 +45,7 @@ config TARGET_SOCFPGA_ARRIA10 select SPL_SYSCON if SPL select ETH_DESIGNWARE_SOCFPGA imply FPGA_SOCFPGA - imply USE_TINY_PRINTF + imply SPL_USE_TINY_PRINTF config TARGET_SOCFPGA_CYCLONE5 bool @@ -59,7 +59,7 @@ config TARGET_SOCFPGA_GEN5 imply SPL_SIZE_LIMIT_SUBTRACT_MALLOC imply SPL_STACK_R imply SPL_SYS_MALLOC_SIMPLE - imply USE_TINY_PRINTF + imply SPL_USE_TINY_PRINTF config TARGET_SOCFPGA_STRATIX10 bool diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 62b93c112b..048b85ba7a 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -963,7 +963,7 @@ config SPL_SERIAL_SUPPORT for displaying messages while SPL is running. It also brings in printf() and panic() functions. This should normally be enabled unless there are space reasons not to. Even then, consider - enabling USE_TINY_PRINTF which is a small printf() version. + enabling SPL_USE_TINY_PRINTF which is a small printf() version. config SPL_SPI_FLASH_SUPPORT bool "Support SPI flash drivers" diff --git a/common/xyzModem.c b/common/xyzModem.c index e85da74a69..6bf2375671 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -173,7 +173,7 @@ parse_num (char *s, unsigned long *val, char **es, char *delim) } -#if defined(DEBUG) && !defined(CONFIG_USE_TINY_PRINTF) +#if defined(DEBUG) && !CONFIG_IS_ENABLED(USE_TINY_PRINTF) /* * Note: this debug setup works by storing the strings in a fixed buffer */ diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index e69f81b6e5..1a1d58d3cc 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -51,5 +51,5 @@ CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_TPS65910=y CONFIG_CONS_INDEX=4 -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set # CONFIG_EFI_LOADER is not set diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 7aa8c54a12..c45fc68ac3 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -67,7 +67,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 22ccf526f6..a9e58047ac 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -67,5 +67,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 486a2e089b..bdfa13a0a7 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -65,7 +65,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index b3c2970207..01adbf0b19 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -65,5 +65,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 0b3391a2a6..409b8a38d5 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -191,7 +191,7 @@ CONFIG_OSD=y CONFIG_SANDBOX_OSD=y CONFIG_FS_CBFS=y CONFIG_FS_CRAMFS=y -# CONFIG_USE_TINY_PRINTF is not set +# CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_CMD_DHRYSTONE=y CONFIG_TPM=y CONFIG_LZ4=y diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 01cfa2f788..90fbed455b 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -294,7 +294,7 @@ int dm_gpio_request(struct gpio_desc *desc, const char *label) static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_USE_TINY_PRINTF) +#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40]; @@ -343,7 +343,7 @@ int gpio_request(unsigned gpio, const char *label) */ int gpio_requestf(unsigned gpio, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_USE_TINY_PRINTF) +#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40]; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c8f71cd0c1..6bece7f307 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2577,7 +2577,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len); #if !defined(CONFIG_SPL_BUILD) || \ (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \ - !defined(CONFIG_USE_TINY_PRINTF)) + !CONFIG_IS_ENABLED(USE_TINY_PRINTF)) sprintf(bdesc->vendor, "Man %06x Snr %04x%04x", mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff), (mmc->cid[3] >> 16) & 0xffff); diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c index 719a2fd23a..c6107522be 100644 --- a/drivers/mtd/spi/sf-uclass.c +++ b/drivers/mtd/spi/sf-uclass.c @@ -66,7 +66,7 @@ int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs, char *str; int ret; -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_TINY_PRINTF) +#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) str = "spi_flash"; #else char name[30]; diff --git a/lib/Kconfig b/lib/Kconfig index 3da45a5ec3..135f0b372b 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -40,12 +40,12 @@ config PRINTF config SPL_PRINTF bool select SPL_SPRINTF - select SPL_STRTO if !USE_TINY_PRINTF + select SPL_STRTO if !SPL_USE_TINY_PRINTF config TPL_PRINTF bool select TPL_SPRINTF - select TPL_STRTO if !USE_TINY_PRINTF + select TPL_STRTO if !TPL_USE_TINY_PRINTF config SPRINTF bool @@ -95,9 +95,9 @@ config SYS_HZ get_timer() must operate in milliseconds and this option must be set to 1000. -config USE_TINY_PRINTF +config SPL_USE_TINY_PRINTF bool "Enable tiny printf() version" - depends on SPL || TPL + depends on SPL default y help This option enables a tiny, stripped down printf version. @@ -107,6 +107,18 @@ config USE_TINY_PRINTF The supported format specifiers are %c, %s, %u/%d and %x. +config TPL_USE_TINY_PRINTF + bool "Enable tiny printf() version" + depends on TPL + default y if SPL_USE_TINY_PRINTF + help + This option enables a tiny, stripped down printf version. + This should only be used in space limited environments, + like SPL versions with hard memory limits. This version + reduces the code size by about 2.5KiB on armv7. + + The supported format specifiers are %c, %s, %u/%d and %x. + config PANIC_HANG bool "Do not reset the system on fatal error" help diff --git a/lib/Makefile b/lib/Makefile index 2fffd68f94..d248d8626c 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -106,7 +106,7 @@ obj-y += panic.o ifeq ($(CONFIG_$(SPL_TPL_)BUILD),y) # SPL U-Boot may use full-printf, tiny-printf or none at all -ifdef CONFIG_USE_TINY_PRINTF +ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o else obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += vsprintf.o strmhz.o -- 2.25.1