From 26dafeeba4d78a1b0395842114443222b7a21c8c Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 29 Apr 2019 18:21:34 +0200 Subject: [PATCH] mac80211: rt2x00: replace patches with upstream version Support for RT3883/RT3663 was merged upstream [1]. Use that patch instead of our original series. The resulting source tree is exactly identical, this commit is merely reorganizing the patches. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id=d0e61a0f7cca51ce340a5a73595189972122ff25 Signed-off-by: Daniel Golle --- .../050-rt2x00-add-RT3883-support.patch | 959 ++++++++++++++++++ ...-rt2800lib-enable-support-for-RT3883.patch | 20 - ...x00-rt2800lib-add-rf_vals-for-RF3853.patch | 112 -- ...ib-enable-VCO-calibration-for-RF3853.patch | 28 - ...-add-channel-configuration-function-.patch | 235 ----- ...2x00-rt2800lib-enable-RF3853-support.patch | 20 - ...-add-MAC-register-initialization-for.patch | 62 -- ...-fix-rt2800soc_disable_radio-for-RT3.patch | 30 - ...-add-BBP-register-initialization-for.patch | 71 -- ...-add-RFCSR-initialization-for-RT3883.patch | 178 ---- ...-use-the-extended-EEPROM-map-for-RT3.patch | 22 - ...ib-force-rf-type-to-RF3853-on-RT3883.patch | 21 - ...-add-channel-configuration-code-for-.patch | 136 --- ...-fix-txpower_to_dev-function-for-RT3.patch | 30 - ...-use-correct-txpower-calculation-fun.patch | 23 - ...-hardcode-txmixer-gain-values-to-zer.patch | 33 - ...b-use-correct-RT-XWI-size-for-RT3883.patch | 20 - ...-fix-antenna-configuration-for-RT388.patch | 22 - ...-fix-LNA-gain-configuration-for-RT38.patch | 32 - ...0-rt2800lib-fix-VGC-setup-for-RT3883.patch | 44 - ...-fix-EEPROM-LNA-validation-for-RT388.patch | 42 - ...-fix-txpower-compensation-for-RT3883.patch | 22 - 22 files changed, 959 insertions(+), 1203 deletions(-) create mode 100644 package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch delete mode 100644 package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch diff --git a/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch b/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch new file mode 100644 index 0000000000..162a20155d --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch @@ -0,0 +1,959 @@ +From d0e61a0f7cca51ce340a5a73595189972122ff25 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Wed, 24 Apr 2019 09:49:24 +0200 +Subject: [PATCH] rt2x00: add RT3883 support + +Patch add support for RT3883 chip. Code was taken direclty +from openwrt project and merge into one patch. + +Signed-off-by: Gabor Juhos +Signed-off-by: Stanislaw Gruszka +Signed-off-by: Kalle Valo +--- + drivers/net/wireless/ralink/rt2x00/rt2800.h | 19 +- + .../net/wireless/ralink/rt2x00/rt2800lib.c | 598 +++++++++++++++++- + .../net/wireless/ralink/rt2x00/rt2800soc.c | 9 +- + 3 files changed, 607 insertions(+), 19 deletions(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h +@@ -48,7 +48,8 @@ + * RF2853 2.4G/5G 3T3R + * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) + * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) +- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) ++ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593) ++ * RF3853 2.4G/5G 3T3R(RT3883/RT3662) + * RF5592 2.4G/5G 2T2R + * RF3070 2.4G 1T1R + * RF5360 2.4G 1T1R +@@ -72,6 +73,7 @@ + #define RF5592 0x000f + #define RF3070 0x3070 + #define RF3290 0x3290 ++#define RF3853 0x3853 + #define RF5350 0x5350 + #define RF5360 0x5360 + #define RF5362 0x5362 +@@ -1726,6 +1728,20 @@ + #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) + + /* ++ * TX_TXBF_CFG: ++ */ ++#define TX_TXBF_CFG_0 0x138c ++#define TX_TXBF_CFG_1 0x13a4 ++#define TX_TXBF_CFG_2 0x13a8 ++#define TX_TXBF_CFG_3 0x13ac ++ ++/* ++ * TX_FBK_CFG_3S: ++ */ ++#define TX_FBK_CFG_3S_0 0x13c4 ++#define TX_FBK_CFG_3S_1 0x13c8 ++ ++/* + * RX_FILTER_CFG: RX configuration register. + */ + #define RX_FILTER_CFG 0x1400 +@@ -2296,6 +2312,7 @@ struct mac_iveiv_entry { + /* + * RFCSR 2: + */ ++#define RFCSR2_RESCAL_BP FIELD8(0x40) + #define RFCSR2_RESCAL_EN FIELD8(0x80) + #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02) + #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20) +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i + wiphy_name(rt2x00dev->hw->wiphy), word)) + return 0; + +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + map = rt2800_eeprom_map_ext; + else + map = rt2800_eeprom_map; +@@ -590,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt + { + switch (rt2x00dev->chip.rt) { + case RT3593: ++ case RT3883: + *txwi_size = TXWI_DESC_SIZE_4WORDS; + *rxwi_size = RXWI_DESC_SIZE_5WORDS; + break; +@@ -2180,7 +2182,8 @@ void rt2800_config_ant(struct rt2x00_dev + rt2800_bbp_write(rt2x00dev, 3, r3); + rt2800_bbp_write(rt2x00dev, 1, r1); + +- if (rt2x00_rt(rt2x00dev, RT3593)) { ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) { + if (ant->rx_chain_num == 1) + rt2800_bbp_write(rt2x00dev, 86, 0x00); + else +@@ -2202,7 +2205,8 @@ static void rt2800_config_lna_gain(struc + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { +- if (rt2x00_rt(rt2x00dev, RT3593)) { ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_EXT_LNA2_A1); +@@ -2212,7 +2216,8 @@ static void rt2800_config_lna_gain(struc + EEPROM_RSSI_BG2_LNA_A1); + } + } else { +- if (rt2x00_rt(rt2x00dev, RT3593)) { ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) { + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + lna_gain = rt2x00_get_field16(eeprom, + EEPROM_EXT_LNA2_A2); +@@ -2880,6 +2885,211 @@ static void rt2800_config_channel_rf3053 + } + } + ++static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u8 rfcsr; ++ u8 bbp; ++ u8 pwr1, pwr2, pwr3; ++ ++ const bool txbf_enabled = false; /* TODO */ ++ ++ /* TODO: add band selection */ ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); ++ else if (rf->channel < 132) ++ rt2800_rfcsr_write(rt2x00dev, 6, 0x80); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); ++ ++ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); ++ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 11, 0x46); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48); ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 12, 0x52); ++ ++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); ++ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); ++ ++ switch (rt2x00dev->default_ant.tx_chain_num) { ++ case 3: ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); ++ /* fallthrough */ ++ case 2: ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); ++ /* fallthrough */ ++ case 1: ++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); ++ break; ++ } ++ ++ switch (rt2x00dev->default_ant.rx_chain_num) { ++ case 3: ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); ++ /* fallthrough */ ++ case 2: ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); ++ /* fallthrough */ ++ case 1: ++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); ++ break; ++ } ++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); ++ ++ rt2800_freq_cal_mode1(rt2x00dev); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); ++ if (!conf_is_ht40(conf)) ++ rfcsr &= ~(0x06); ++ else ++ rfcsr |= 0x06; ++ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80); ++ ++ if (conf_is_ht40(conf)) ++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20); ++ ++ /* loopback RF_BS */ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36); ++ if (rf->channel <= 14) ++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); ++ else ++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0); ++ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr); ++ ++ if (rf->channel <= 14) ++ rfcsr = 0x23; ++ else if (rf->channel < 100) ++ rfcsr = 0x36; ++ else if (rf->channel < 132) ++ rfcsr = 0x32; ++ else ++ rfcsr = 0x30; ++ ++ if (txbf_enabled) ++ rfcsr |= 0x40; ++ ++ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); ++ ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b); ++ ++ if (rf->channel <= 14) ++ rfcsr = 0xbb; ++ else if (rf->channel < 100) ++ rfcsr = 0xeb; ++ else if (rf->channel < 132) ++ rfcsr = 0xb3; ++ else ++ rfcsr = 0x9b; ++ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr); ++ ++ if (rf->channel <= 14) ++ rfcsr = 0x8e; ++ else ++ rfcsr = 0x8a; ++ ++ if (txbf_enabled) ++ rfcsr |= 0x20; ++ ++ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); ++ ++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 51, 0x75); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52); ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 52, 0x45); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05); ++ ++ if (rf->channel <= 14) { ++ pwr1 = info->default_power1 & 0x1f; ++ pwr2 = info->default_power2 & 0x1f; ++ pwr3 = info->default_power3 & 0x1f; ++ } else { ++ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) | ++ (info->default_power1 & 0x7); ++ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) | ++ (info->default_power2 & 0x7); ++ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) | ++ (info->default_power3 & 0x7); ++ } ++ ++ rt2800_rfcsr_write(rt2x00dev, 53, pwr1); ++ rt2800_rfcsr_write(rt2x00dev, 54, pwr2); ++ rt2800_rfcsr_write(rt2x00dev, 55, pwr3); ++ ++ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n", ++ rf->channel, pwr1, pwr2, pwr3); ++ ++ bbp = (info->default_power1 >> 5) | ++ ((info->default_power2 & 0xe0) >> 1); ++ rt2800_bbp_write(rt2x00dev, 109, bbp); ++ ++ bbp = rt2800_bbp_read(rt2x00dev, 110); ++ bbp &= 0x0f; ++ bbp |= (info->default_power3 & 0xe0) >> 1; ++ rt2800_bbp_write(rt2x00dev, 110, bbp); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57); ++ if (rf->channel <= 14) ++ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); ++ else ++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); ++ ++ /* Enable RF tuning */ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); ++ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); ++ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); ++ ++ udelay(2000); ++ ++ bbp = rt2800_bbp_read(rt2x00dev, 49); ++ /* clear update flag */ ++ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe); ++ rt2800_bbp_write(rt2x00dev, 49, bbp); ++ ++ /* TODO: add calibration for TxBF */ ++} ++ + #define POWER_BOUND 0x27 + #define POWER_BOUND_5G 0x2b + +@@ -3683,19 +3893,51 @@ static char rt2800_txpower_to_dev(struct + unsigned int channel, + char txpower) + { +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC); + + if (channel <= 14) + return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); + +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + return clamp_t(char, txpower, MIN_A_TXPOWER_3593, + MAX_A_TXPOWER_3593); + else + return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); + } + ++static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf) ++{ ++ u8 bbp; ++ ++ bbp = (rf->channel > 14) ? 0x48 : 0x38; ++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 69, 0x12); ++ ++ if (rf->channel <= 14) { ++ rt2800_bbp_write(rt2x00dev, 70, 0x0a); ++ } else { ++ /* Disable CCK packet detection */ ++ rt2800_bbp_write(rt2x00dev, 70, 0x00); ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 73, 0x10); ++ ++ if (rf->channel > 14) { ++ rt2800_bbp_write(rt2x00dev, 62, 0x1d); ++ rt2800_bbp_write(rt2x00dev, 63, 0x1d); ++ rt2800_bbp_write(rt2x00dev, 64, 0x1d); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 62, 0x2d); ++ rt2800_bbp_write(rt2x00dev, 63, 0x2d); ++ rt2800_bbp_write(rt2x00dev, 64, 0x2d); ++ } ++} ++ + static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, +@@ -3714,6 +3956,12 @@ static void rt2800_config_channel(struct + rt2800_txpower_to_dev(rt2x00dev, rf->channel, + info->default_power3); + ++ switch (rt2x00dev->chip.rt) { ++ case RT3883: ++ rt3883_bbp_adjust(rt2x00dev, rf); ++ break; ++ } ++ + switch (rt2x00dev->chip.rf) { + case RF2020: + case RF3020: +@@ -3734,6 +3982,9 @@ static void rt2800_config_channel(struct + case RF3322: + rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); + break; ++ case RF3853: ++ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info); ++ break; + case RF3070: + case RF5350: + case RF5360: +@@ -3815,6 +4066,15 @@ static void rt2800_config_channel(struct + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 77, 0x98); ++ } else if (rt2x00_rt(rt2x00dev, RT3883)) { ++ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); ++ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); ++ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); ++ ++ if (rt2x00dev->default_ant.rx_chain_num > 1) ++ rt2800_bbp_write(rt2x00dev, 86, 0x46); ++ else ++ rt2800_bbp_write(rt2x00dev, 86, 0); + } else { + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); +@@ -3828,6 +4088,7 @@ static void rt2800_config_channel(struct + !rt2x00_rt(rt2x00dev, RT6352)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { + rt2800_bbp_write(rt2x00dev, 82, 0x62); ++ rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + } else { + if (rt2x00_rt(rt2x00dev, RT3593)) +@@ -3836,19 +4097,22 @@ static void rt2800_config_channel(struct + rt2800_bbp_write(rt2x00dev, 82, 0x84); + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 83, 0x8a); + } + + } else { + if (rt2x00_rt(rt2x00dev, RT3572)) + rt2800_bbp_write(rt2x00dev, 82, 0x94); +- else if (rt2x00_rt(rt2x00dev, RT3593)) ++ else if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 82, 0x82); + else if (!rt2x00_rt(rt2x00dev, RT6352)) + rt2800_bbp_write(rt2x00dev, 82, 0xf2); + +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + rt2800_bbp_write(rt2x00dev, 83, 0x9a); + + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) +@@ -3984,6 +4248,23 @@ static void rt2800_config_channel(struct + usleep_range(1000, 1500); + } + ++ if (rt2x00_rt(rt2x00dev, RT3883)) { ++ if (!conf_is_ht40(conf)) ++ rt2800_bbp_write(rt2x00dev, 105, 0x34); ++ else ++ rt2800_bbp_write(rt2x00dev, 105, 0x04); ++ ++ /* AGC init */ ++ if (rf->channel <= 14) ++ reg = 0x2e + rt2x00dev->lna_gain; ++ else ++ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3); ++ ++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); ++ ++ usleep_range(1000, 1500); ++ } ++ + if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) { + reg = 0x10; + if (!conf_is_ht40(conf)) { +@@ -4243,6 +4524,9 @@ static u8 rt2800_compensate_txpower(stru + if (rt2x00_rt(rt2x00dev, RT3593)) + return min_t(u8, txpower, 0xc); + ++ if (rt2x00_rt(rt2x00dev, RT3883)) ++ return min_t(u8, txpower, 0xf); ++ + if (rt2x00_has_cap_power_limit(rt2x00dev)) { + /* + * Check if eirp txpower exceed txpower_limit. +@@ -5004,7 +5288,8 @@ static void rt2800_config_txpower(struct + struct ieee80211_channel *chan, + int power_level) + { +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); + else if (rt2x00_rt(rt2x00dev, RT6352)) + rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level); +@@ -5051,6 +5336,7 @@ void rt2800_vco_calibration(struct rt2x0 + case RF3053: + case RF3070: + case RF3290: ++ case RF3853: + case RF5350: + case RF5360: + case RF5362: +@@ -5251,7 +5537,8 @@ static u8 rt2800_get_default_vgc(struct + else + vgc = 0x2e + rt2x00dev->lna_gain; + } else { /* 5GHZ band */ +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; + else if (rt2x00_rt(rt2x00dev, RT5592)) + vgc = 0x24 + (2 * rt2x00dev->lna_gain); +@@ -5271,7 +5558,8 @@ static inline void rt2800_set_vgc(struct + { + if (qual->vgc_level != vgc_level) { + if (rt2x00_rt(rt2x00dev, RT3572) || +- rt2x00_rt(rt2x00dev, RT3593)) { ++ rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) { + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, + vgc_level); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { +@@ -5318,6 +5606,11 @@ void rt2800_link_tuner(struct rt2x00_dev + } + break; + ++ case RT3883: ++ if (qual->rssi > -65) ++ vgc += 0x10; ++ break; ++ + case RT5592: + if (qual->rssi > -65) + vgc += 0x20; +@@ -5470,6 +5763,12 @@ static int rt2800_init_registers(struct + rt2800_register_write(rt2x00dev, TX_SW_CFG2, + 0x00000000); + } ++ } else if (rt2x00_rt(rt2x00dev, RT3883)) { ++ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); ++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); ++ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000); ++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); ++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); + } else if (rt2x00_rt(rt2x00dev, RT5390) || + rt2x00_rt(rt2x00dev, RT5392) || + rt2x00_rt(rt2x00dev, RT6352)) { +@@ -5683,6 +5982,11 @@ static int rt2800_init_registers(struct + reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; + rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); + ++ if (rt2x00_rt(rt2x00dev, RT3883)) { ++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008); ++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413); ++ } ++ + reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG); + rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, +@@ -6299,6 +6603,47 @@ static void rt2800_init_bbp_3593(struct + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + } + ++static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev) ++{ ++ rt2800_init_bbp_early(rt2x00dev); ++ ++ rt2800_bbp_write(rt2x00dev, 4, 0x50); ++ rt2800_bbp_write(rt2x00dev, 47, 0x48); ++ ++ rt2800_bbp_write(rt2x00dev, 86, 0x46); ++ rt2800_bbp_write(rt2x00dev, 88, 0x90); ++ ++ rt2800_bbp_write(rt2x00dev, 92, 0x02); ++ ++ rt2800_bbp_write(rt2x00dev, 103, 0xc0); ++ rt2800_bbp_write(rt2x00dev, 104, 0x92); ++ rt2800_bbp_write(rt2x00dev, 105, 0x34); ++ rt2800_bbp_write(rt2x00dev, 106, 0x12); ++ rt2800_bbp_write(rt2x00dev, 120, 0x50); ++ rt2800_bbp_write(rt2x00dev, 137, 0x0f); ++ rt2800_bbp_write(rt2x00dev, 163, 0x9d); ++ ++ /* Set ITxBF timeout to 0x9C40=1000msec */ ++ rt2800_bbp_write(rt2x00dev, 179, 0x02); ++ rt2800_bbp_write(rt2x00dev, 180, 0x00); ++ rt2800_bbp_write(rt2x00dev, 182, 0x40); ++ rt2800_bbp_write(rt2x00dev, 180, 0x01); ++ rt2800_bbp_write(rt2x00dev, 182, 0x9c); ++ ++ rt2800_bbp_write(rt2x00dev, 179, 0x00); ++ ++ /* Reprogram the inband interface to put right values in RXWI */ ++ rt2800_bbp_write(rt2x00dev, 142, 0x04); ++ rt2800_bbp_write(rt2x00dev, 143, 0x3b); ++ rt2800_bbp_write(rt2x00dev, 142, 0x06); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa0); ++ rt2800_bbp_write(rt2x00dev, 142, 0x07); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa1); ++ rt2800_bbp_write(rt2x00dev, 142, 0x08); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa2); ++ rt2800_bbp_write(rt2x00dev, 148, 0xc8); ++} ++ + static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) + { + int ant, div_mode; +@@ -6743,6 +7088,9 @@ static void rt2800_init_bbp(struct rt2x0 + case RT3593: + rt2800_init_bbp_3593(rt2x00dev); + return; ++ case RT3883: ++ rt2800_init_bbp_3883(rt2x00dev); ++ return; + case RT5390: + case RT5392: + rt2800_init_bbp_53xx(rt2x00dev); +@@ -7614,6 +7962,144 @@ static void rt2800_init_rfcsr_5350(struc + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); + } + ++static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfcsr; ++ ++ /* TODO: get the actual ECO value from the SoC */ ++ const unsigned int eco = 5; ++ ++ rt2800_rf_init_calibration(rt2x00dev, 2); ++ ++ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0); ++ rt2800_rfcsr_write(rt2x00dev, 1, 0x03); ++ rt2800_rfcsr_write(rt2x00dev, 2, 0x50); ++ rt2800_rfcsr_write(rt2x00dev, 3, 0x20); ++ rt2800_rfcsr_write(rt2x00dev, 4, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 5, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); ++ rt2800_rfcsr_write(rt2x00dev, 7, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b); ++ rt2800_rfcsr_write(rt2x00dev, 9, 0x08); ++ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); ++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48); ++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); ++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12); ++ rt2800_rfcsr_write(rt2x00dev, 14, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 15, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 16, 0x00); ++ ++ /* RFCSR 17 will be initialized later based on the ++ * frequency offset stored in the EEPROM ++ */ ++ ++ rt2800_rfcsr_write(rt2x00dev, 18, 0x40); ++ rt2800_rfcsr_write(rt2x00dev, 19, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 20, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 21, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 22, 0x20); ++ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0); ++ rt2800_rfcsr_write(rt2x00dev, 24, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 25, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 26, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 27, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 28, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 29, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 30, 0x10); ++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80); ++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80); ++ rt2800_rfcsr_write(rt2x00dev, 33, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20); ++ rt2800_rfcsr_write(rt2x00dev, 35, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 36, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 37, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 38, 0x86); ++ rt2800_rfcsr_write(rt2x00dev, 39, 0x23); ++ rt2800_rfcsr_write(rt2x00dev, 40, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 41, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 42, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 43, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93); ++ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); ++ rt2800_rfcsr_write(rt2x00dev, 46, 0x60); ++ rt2800_rfcsr_write(rt2x00dev, 47, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 48, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e); ++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86); ++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51); ++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05); ++ rt2800_rfcsr_write(rt2x00dev, 53, 0x76); ++ rt2800_rfcsr_write(rt2x00dev, 54, 0x76); ++ rt2800_rfcsr_write(rt2x00dev, 55, 0x76); ++ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb); ++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); ++ rt2800_rfcsr_write(rt2x00dev, 58, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 59, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 60, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 61, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 62, 0x00); ++ rt2800_rfcsr_write(rt2x00dev, 63, 0x00); ++ ++ /* TODO: rx filter calibration? */ ++ ++ rt2800_bbp_write(rt2x00dev, 137, 0x0f); ++ ++ rt2800_bbp_write(rt2x00dev, 163, 0x9d); ++ ++ rt2800_bbp_write(rt2x00dev, 105, 0x05); ++ ++ rt2800_bbp_write(rt2x00dev, 179, 0x02); ++ rt2800_bbp_write(rt2x00dev, 180, 0x00); ++ rt2800_bbp_write(rt2x00dev, 182, 0x40); ++ rt2800_bbp_write(rt2x00dev, 180, 0x01); ++ rt2800_bbp_write(rt2x00dev, 182, 0x9c); ++ ++ rt2800_bbp_write(rt2x00dev, 179, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 142, 0x04); ++ rt2800_bbp_write(rt2x00dev, 143, 0x3b); ++ rt2800_bbp_write(rt2x00dev, 142, 0x06); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa0); ++ rt2800_bbp_write(rt2x00dev, 142, 0x07); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa1); ++ rt2800_bbp_write(rt2x00dev, 142, 0x08); ++ rt2800_bbp_write(rt2x00dev, 143, 0xa2); ++ rt2800_bbp_write(rt2x00dev, 148, 0xc8); ++ ++ if (eco == 5) { ++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); ++ rt2800_rfcsr_write(rt2x00dev, 33, 0x32); ++ } ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); ++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0); ++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); ++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); ++ msleep(1); ++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0); ++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); ++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); ++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); ++ rfcsr |= 0xc0; ++ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); ++ rfcsr |= 0x20; ++ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46); ++ rfcsr |= 0x20; ++ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr); ++ ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); ++ rfcsr &= ~0xee; ++ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); ++} ++ + static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) + { + rt2800_rf_init_calibration(rt2x00dev, 2); +@@ -8456,6 +8942,9 @@ static void rt2800_init_rfcsr(struct rt2 + case RT3390: + rt2800_init_rfcsr_3390(rt2x00dev); + break; ++ case RT3883: ++ rt2800_init_rfcsr_3883(rt2x00dev); ++ break; + case RT3572: + rt2800_init_rfcsr_3572(rt2x00dev); + break; +@@ -8661,7 +9150,8 @@ static u8 rt2800_get_txmixer_gain_24g(st + { + u16 word; + +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + return 0; + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG); +@@ -8675,7 +9165,8 @@ static u8 rt2800_get_txmixer_gain_5g(str + { + u16 word; + +- if (rt2x00_rt(rt2x00dev, RT3593)) ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) + return 0; + + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A); +@@ -8781,7 +9272,8 @@ static int rt2800_validate_eeprom(struct + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); +- if (!rt2x00_rt(rt2x00dev, RT3593)) { ++ if (!rt2x00_rt(rt2x00dev, RT3593) && ++ !rt2x00_rt(rt2x00dev, RT3883)) { + if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, +@@ -8801,7 +9293,8 @@ static int rt2800_validate_eeprom(struct + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); +- if (!rt2x00_rt(rt2x00dev, RT3593)) { ++ if (!rt2x00_rt(rt2x00dev, RT3593) && ++ !rt2x00_rt(rt2x00dev, RT3883)) { + if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, +@@ -8809,7 +9302,8 @@ static int rt2800_validate_eeprom(struct + } + rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + +- if (rt2x00_rt(rt2x00dev, RT3593)) { ++ if (rt2x00_rt(rt2x00dev, RT3593) || ++ rt2x00_rt(rt2x00dev, RT3883)) { + word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); + if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff) +@@ -8848,6 +9342,8 @@ static int rt2800_init_eeprom(struct rt2 + rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID); + else if (rt2x00_rt(rt2x00dev, RT3352)) + rf = RF3322; ++ else if (rt2x00_rt(rt2x00dev, RT3883)) ++ rf = RF3853; + else if (rt2x00_rt(rt2x00dev, RT5350)) + rf = RF5350; + else +@@ -8868,6 +9364,7 @@ static int rt2800_init_eeprom(struct rt2 + case RF3290: + case RF3320: + case RF3322: ++ case RF3853: + case RF5350: + case RF5360: + case RF5362: +@@ -9154,6 +9651,66 @@ static const struct rf_channel rf_vals_3 + {14, 0xF0, 2, 0x18}, + }; + ++static const struct rf_channel rf_vals_3853[] = { ++ {1, 241, 6, 2}, ++ {2, 241, 6, 7}, ++ {3, 242, 6, 2}, ++ {4, 242, 6, 7}, ++ {5, 243, 6, 2}, ++ {6, 243, 6, 7}, ++ {7, 244, 6, 2}, ++ {8, 244, 6, 7}, ++ {9, 245, 6, 2}, ++ {10, 245, 6, 7}, ++ {11, 246, 6, 2}, ++ {12, 246, 6, 7}, ++ {13, 247, 6, 2}, ++ {14, 248, 6, 4}, ++ ++ {36, 0x56, 8, 4}, ++ {38, 0x56, 8, 6}, ++ {40, 0x56, 8, 8}, ++ {44, 0x57, 8, 0}, ++ {46, 0x57, 8, 2}, ++ {48, 0x57, 8, 4}, ++ {52, 0x57, 8, 8}, ++ {54, 0x57, 8, 10}, ++ {56, 0x58, 8, 0}, ++ {60, 0x58, 8, 4}, ++ {62, 0x58, 8, 6}, ++ {64, 0x58, 8, 8}, ++ ++ {100, 0x5b, 8, 8}, ++ {102, 0x5b, 8, 10}, ++ {104, 0x5c, 8, 0}, ++ {108, 0x5c, 8, 4}, ++ {110, 0x5c, 8, 6}, ++ {112, 0x5c, 8, 8}, ++ {114, 0x5c, 8, 10}, ++ {116, 0x5d, 8, 0}, ++ {118, 0x5d, 8, 2}, ++ {120, 0x5d, 8, 4}, ++ {124, 0x5d, 8, 8}, ++ {126, 0x5d, 8, 10}, ++ {128, 0x5e, 8, 0}, ++ {132, 0x5e, 8, 4}, ++ {134, 0x5e, 8, 6}, ++ {136, 0x5e, 8, 8}, ++ {140, 0x5f, 8, 0}, ++ ++ {149, 0x5f, 8, 9}, ++ {151, 0x5f, 8, 11}, ++ {153, 0x60, 8, 1}, ++ {157, 0x60, 8, 5}, ++ {159, 0x60, 8, 7}, ++ {161, 0x60, 8, 9}, ++ {165, 0x61, 8, 1}, ++ {167, 0x61, 8, 3}, ++ {169, 0x61, 8, 5}, ++ {171, 0x61, 8, 7}, ++ {173, 0x61, 8, 9}, ++}; ++ + static const struct rf_channel rf_vals_5592_xtal20[] = { + /* Channel, N, K, mod, R */ + {1, 482, 4, 10, 3}, +@@ -9417,6 +9974,11 @@ static int rt2800_probe_hw_mode(struct r + spec->channels = rf_vals_3x; + break; + ++ case RF3853: ++ spec->num_channels = ARRAY_SIZE(rf_vals_3853); ++ spec->channels = rf_vals_3853; ++ break; ++ + case RF5592: + reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX); + if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { +@@ -9536,6 +10098,7 @@ static int rt2800_probe_hw_mode(struct r + case RF3053: + case RF3070: + case RF3290: ++ case RF3853: + case RF5350: + case RF5360: + case RF5362: +@@ -9578,6 +10141,7 @@ static int rt2800_probe_rt(struct rt2x00 + case RT3390: + case RT3572: + case RT3593: ++ case RT3883: + case RT5350: + case RT5390: + case RT5392: +--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c +@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s + + static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev) + { ++ u32 reg; ++ + rt2800_disable_radio(rt2x00dev); + rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); +- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); ++ ++ reg = 0; ++ if (rt2x00_rt(rt2x00dev, RT3883)) ++ rt2x00_set_field32(®, TX_PIN_CFG_RFTR_EN, 1); ++ ++ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg); + } + + static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch deleted file mode 100644 index 95cdc7fa6a..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 4f16582c93a71eba9d389e0f0a8aa9099a9587cd Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:26 +0100 -Subject: [PATCH] rt2x00: rt2800lib: enable support for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9578,6 +9578,7 @@ static int rt2800_probe_rt(struct rt2x00 - case RT3390: - case RT3572: - case RT3593: -+ case RT3883: - case RT5350: - case RT5390: - case RT5392: diff --git a/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch deleted file mode 100644 index 160319633b..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch +++ /dev/null @@ -1,112 +0,0 @@ -From ecb394ccf248d8652c463133c4f404458a57a9c1 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:26 +0100 -Subject: [PATCH] rt2x00: rt2800lib: add rf_vals for RF3853 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 4 +- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++ - 2 files changed, 68 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -48,7 +48,8 @@ - * RF2853 2.4G/5G 3T3R - * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) - * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) -- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) -+ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593) -+ * RF3853 2.4G/5G 3T3R(RT3883/RT3662) - * RF5592 2.4G/5G 2T2R - * RF3070 2.4G 1T1R - * RF5360 2.4G 1T1R -@@ -72,6 +73,7 @@ - #define RF5592 0x000f - #define RF3070 0x3070 - #define RF3290 0x3290 -+#define RF3853 0x3853 - #define RF5350 0x5350 - #define RF5360 0x5360 - #define RF5362 0x5362 ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9154,6 +9154,66 @@ static const struct rf_channel rf_vals_3 - {14, 0xF0, 2, 0x18}, - }; - -+static const struct rf_channel rf_vals_3853[] = { -+ {1, 241, 6, 2}, -+ {2, 241, 6, 7}, -+ {3, 242, 6, 2}, -+ {4, 242, 6, 7}, -+ {5, 243, 6, 2}, -+ {6, 243, 6, 7}, -+ {7, 244, 6, 2}, -+ {8, 244, 6, 7}, -+ {9, 245, 6, 2}, -+ {10, 245, 6, 7}, -+ {11, 246, 6, 2}, -+ {12, 246, 6, 7}, -+ {13, 247, 6, 2}, -+ {14, 248, 6, 4}, -+ -+ {36, 0x56, 8, 4}, -+ {38, 0x56, 8, 6}, -+ {40, 0x56, 8, 8}, -+ {44, 0x57, 8, 0}, -+ {46, 0x57, 8, 2}, -+ {48, 0x57, 8, 4}, -+ {52, 0x57, 8, 8}, -+ {54, 0x57, 8, 10}, -+ {56, 0x58, 8, 0}, -+ {60, 0x58, 8, 4}, -+ {62, 0x58, 8, 6}, -+ {64, 0x58, 8, 8}, -+ -+ {100, 0x5b, 8, 8}, -+ {102, 0x5b, 8, 10}, -+ {104, 0x5c, 8, 0}, -+ {108, 0x5c, 8, 4}, -+ {110, 0x5c, 8, 6}, -+ {112, 0x5c, 8, 8}, -+ {114, 0x5c, 8, 10}, -+ {116, 0x5d, 8, 0}, -+ {118, 0x5d, 8, 2}, -+ {120, 0x5d, 8, 4}, -+ {124, 0x5d, 8, 8}, -+ {126, 0x5d, 8, 10}, -+ {128, 0x5e, 8, 0}, -+ {132, 0x5e, 8, 4}, -+ {134, 0x5e, 8, 6}, -+ {136, 0x5e, 8, 8}, -+ {140, 0x5f, 8, 0}, -+ -+ {149, 0x5f, 8, 9}, -+ {151, 0x5f, 8, 11}, -+ {153, 0x60, 8, 1}, -+ {157, 0x60, 8, 5}, -+ {159, 0x60, 8, 7}, -+ {161, 0x60, 8, 9}, -+ {165, 0x61, 8, 1}, -+ {167, 0x61, 8, 3}, -+ {169, 0x61, 8, 5}, -+ {171, 0x61, 8, 7}, -+ {173, 0x61, 8, 9}, -+}; -+ - static const struct rf_channel rf_vals_5592_xtal20[] = { - /* Channel, N, K, mod, R */ - {1, 482, 4, 10, 3}, -@@ -9417,6 +9477,11 @@ static int rt2800_probe_hw_mode(struct r - spec->channels = rf_vals_3x; - break; - -+ case RF3853: -+ spec->num_channels = ARRAY_SIZE(rf_vals_3853); -+ spec->channels = rf_vals_3853; -+ break; -+ - case RF5592: - reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX); - if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { diff --git a/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch deleted file mode 100644 index dbe592646b..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch +++ /dev/null @@ -1,28 +0,0 @@ -From f8e3fcf18e1f2d7f9e6a9680c5452da090f33d88 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 1 Aug 2013 14:40:44 +0200 -Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5051,6 +5051,7 @@ void rt2800_vco_calibration(struct rt2x0 - case RF3053: - case RF3070: - case RF3290: -+ case RF3853: - case RF5350: - case RF5360: - case RF5362: -@@ -9601,6 +9602,7 @@ static int rt2800_probe_hw_mode(struct r - case RF3053: - case RF3070: - case RF3290: -+ case RF3853: - case RF5350: - case RF5360: - case RF5362: diff --git a/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch deleted file mode 100644 index dc538df484..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch +++ /dev/null @@ -1,235 +0,0 @@ -From 6e3a17190815c6aa4dc53c2cfe9125fb1154f187 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:27 +0100 -Subject: [PATCH] rt2x00: rt2800lib: add channel configuration function for - RF3853 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++ - 1 file changed, 208 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2880,6 +2880,211 @@ static void rt2800_config_channel_rf3053 - } - } - -+static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u8 rfcsr; -+ u8 bbp; -+ u8 pwr1, pwr2, pwr3; -+ -+ const bool txbf_enabled = false; /* TODO */ -+ -+ /* TODO: add band selection */ -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); -+ else if (rf->channel < 132) -+ rt2800_rfcsr_write(rt2x00dev, 6, 0x80); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); -+ -+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1); -+ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3); -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 11, 0x46); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48); -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 12, 0x52); -+ -+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); -+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1); -+ -+ switch (rt2x00dev->default_ant.tx_chain_num) { -+ case 3: -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1); -+ /* fallthrough */ -+ case 2: -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); -+ /* fallthrough */ -+ case 1: -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); -+ break; -+ } -+ -+ switch (rt2x00dev->default_ant.rx_chain_num) { -+ case 3: -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1); -+ /* fallthrough */ -+ case 2: -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); -+ /* fallthrough */ -+ case 1: -+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); -+ break; -+ } -+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); -+ -+ rt2800_freq_cal_mode1(rt2x00dev); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); -+ if (!conf_is_ht40(conf)) -+ rfcsr &= ~(0x06); -+ else -+ rfcsr |= 0x06; -+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80); -+ -+ if (conf_is_ht40(conf)) -+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20); -+ -+ /* loopback RF_BS */ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36); -+ if (rf->channel <= 14) -+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); -+ else -+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0); -+ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr); -+ -+ if (rf->channel <= 14) -+ rfcsr = 0x23; -+ else if (rf->channel < 100) -+ rfcsr = 0x36; -+ else if (rf->channel < 132) -+ rfcsr = 0x32; -+ else -+ rfcsr = 0x30; -+ -+ if (txbf_enabled) -+ rfcsr |= 0x40; -+ -+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr); -+ -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b); -+ -+ if (rf->channel <= 14) -+ rfcsr = 0xbb; -+ else if (rf->channel < 100) -+ rfcsr = 0xeb; -+ else if (rf->channel < 132) -+ rfcsr = 0xb3; -+ else -+ rfcsr = 0x9b; -+ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr); -+ -+ if (rf->channel <= 14) -+ rfcsr = 0x8e; -+ else -+ rfcsr = 0x8a; -+ -+ if (txbf_enabled) -+ rfcsr |= 0x20; -+ -+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr); -+ -+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 51, 0x75); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52); -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05); -+ -+ if (rf->channel <= 14) { -+ pwr1 = info->default_power1 & 0x1f; -+ pwr2 = info->default_power2 & 0x1f; -+ pwr3 = info->default_power3 & 0x1f; -+ } else { -+ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) | -+ (info->default_power1 & 0x7); -+ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) | -+ (info->default_power2 & 0x7); -+ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) | -+ (info->default_power3 & 0x7); -+ } -+ -+ rt2800_rfcsr_write(rt2x00dev, 53, pwr1); -+ rt2800_rfcsr_write(rt2x00dev, 54, pwr2); -+ rt2800_rfcsr_write(rt2x00dev, 55, pwr3); -+ -+ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n", -+ rf->channel, pwr1, pwr2, pwr3); -+ -+ bbp = (info->default_power1 >> 5) | -+ ((info->default_power2 & 0xe0) >> 1); -+ rt2800_bbp_write(rt2x00dev, 109, bbp); -+ -+ bbp = rt2800_bbp_read(rt2x00dev, 110); -+ bbp &= 0x0f; -+ bbp |= (info->default_power3 & 0xe0) >> 1; -+ rt2800_bbp_write(rt2x00dev, 110, bbp); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57); -+ if (rf->channel <= 14) -+ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); -+ -+ /* Enable RF tuning */ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); -+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); -+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); -+ -+ udelay(2000); -+ -+ bbp = rt2800_bbp_read(rt2x00dev, 49); -+ /* clear update flag */ -+ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe); -+ rt2800_bbp_write(rt2x00dev, 49, bbp); -+ -+ /* TODO: add calibration for TxBF */ -+} -+ - #define POWER_BOUND 0x27 - #define POWER_BOUND_5G 0x2b - -@@ -3734,6 +3939,9 @@ static void rt2800_config_channel(struct - case RF3322: - rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); - break; -+ case RF3853: -+ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info); -+ break; - case RF3070: - case RF5350: - case RF5360: diff --git a/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch deleted file mode 100644 index c6ffd7a374..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch +++ /dev/null @@ -1,20 +0,0 @@ -From afd38ae82226551bf879b6c7c4b620c271fee9d2 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 1 Aug 2013 14:42:05 +0200 -Subject: [PATCH] rt2x00: rt2800lib: enable RF3853 support - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9077,6 +9077,7 @@ static int rt2800_init_eeprom(struct rt2 - case RF3290: - case RF3320: - case RF3322: -+ case RF3853: - case RF5350: - case RF5360: - case RF5362: diff --git a/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch deleted file mode 100644 index 102374a474..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 0094872a5e8e4664c6ea1b2dfa487063d39ae363 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:26 +0100 -Subject: [PATCH] rt2x00: rt2800lib: add MAC register initialization for - RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++ - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 19 ++++++++++++++++--- - 2 files changed, 30 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -1728,6 +1728,20 @@ - #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) - - /* -+ * TX_TXBF_CFG: -+ */ -+#define TX_TXBF_CFG_0 0x138c -+#define TX_TXBF_CFG_1 0x13a4 -+#define TX_TXBF_CFG_2 0x13a8 -+#define TX_TXBF_CFG_3 0x13ac -+ -+/* -+ * TX_FBK_CFG_3S: -+ */ -+#define TX_FBK_CFG_3S_0 0x13c4 -+#define TX_FBK_CFG_3S_1 0x13c8 -+ -+/* - * RX_FILTER_CFG: RX configuration register. - */ - #define RX_FILTER_CFG 0x1400 ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5679,6 +5679,12 @@ static int rt2800_init_registers(struct - rt2800_register_write(rt2x00dev, TX_SW_CFG2, - 0x00000000); - } -+ } else if (rt2x00_rt(rt2x00dev, RT3883)) { -+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402); -+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); -+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000); -+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); -+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); - } else if (rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || - rt2x00_rt(rt2x00dev, RT6352)) { -@@ -5892,6 +5898,11 @@ static int rt2800_init_registers(struct - reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; - rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); - -+ if (rt2x00_rt(rt2x00dev, RT3883)) { -+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008); -+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413); -+ } -+ - reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, diff --git a/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch deleted file mode 100644 index d68ad50447..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 6c2d32478159fffff0b85abb6817a21bb2338231 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:27 +0100 -Subject: [PATCH] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c -@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s - - static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev) - { -+ u32 reg; -+ - rt2800_disable_radio(rt2x00dev); - rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); -- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); -+ -+ reg = 0; -+ if (rt2x00_rt(rt2x00dev, RT3883)) -+ rt2x00_set_field32(®, TX_PIN_CFG_RFTR_EN, 1); -+ -+ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg); - } - - static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch deleted file mode 100644 index 3879d0f712..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 84833056aa7dd25f5b097e31c78f2a0914c5160c Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:26 +0100 -Subject: [PATCH] rt2x00: rt2800lib: add BBP register initialization for - RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -6519,6 +6519,47 @@ static void rt2800_init_bbp_3593(struct - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - } - -+static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev) -+{ -+ rt2800_init_bbp_early(rt2x00dev); -+ -+ rt2800_bbp_write(rt2x00dev, 4, 0x50); -+ rt2800_bbp_write(rt2x00dev, 47, 0x48); -+ -+ rt2800_bbp_write(rt2x00dev, 86, 0x46); -+ rt2800_bbp_write(rt2x00dev, 88, 0x90); -+ -+ rt2800_bbp_write(rt2x00dev, 92, 0x02); -+ -+ rt2800_bbp_write(rt2x00dev, 103, 0xc0); -+ rt2800_bbp_write(rt2x00dev, 104, 0x92); -+ rt2800_bbp_write(rt2x00dev, 105, 0x34); -+ rt2800_bbp_write(rt2x00dev, 106, 0x12); -+ rt2800_bbp_write(rt2x00dev, 120, 0x50); -+ rt2800_bbp_write(rt2x00dev, 137, 0x0f); -+ rt2800_bbp_write(rt2x00dev, 163, 0x9d); -+ -+ /* Set ITxBF timeout to 0x9C40=1000msec */ -+ rt2800_bbp_write(rt2x00dev, 179, 0x02); -+ rt2800_bbp_write(rt2x00dev, 180, 0x00); -+ rt2800_bbp_write(rt2x00dev, 182, 0x40); -+ rt2800_bbp_write(rt2x00dev, 180, 0x01); -+ rt2800_bbp_write(rt2x00dev, 182, 0x9c); -+ -+ rt2800_bbp_write(rt2x00dev, 179, 0x00); -+ -+ /* Reprogram the inband interface to put right values in RXWI */ -+ rt2800_bbp_write(rt2x00dev, 142, 0x04); -+ rt2800_bbp_write(rt2x00dev, 143, 0x3b); -+ rt2800_bbp_write(rt2x00dev, 142, 0x06); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa0); -+ rt2800_bbp_write(rt2x00dev, 142, 0x07); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa1); -+ rt2800_bbp_write(rt2x00dev, 142, 0x08); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa2); -+ rt2800_bbp_write(rt2x00dev, 148, 0xc8); -+} -+ - static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) - { - int ant, div_mode; -@@ -6963,6 +7004,9 @@ static void rt2800_init_bbp(struct rt2x0 - case RT3593: - rt2800_init_bbp_3593(rt2x00dev); - return; -+ case RT3883: -+ rt2800_init_bbp_3883(rt2x00dev); -+ return; - case RT5390: - case RT5392: - rt2800_init_bbp_53xx(rt2x00dev); diff --git a/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch deleted file mode 100644 index c3c37e902f..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch +++ /dev/null @@ -1,178 +0,0 @@ -From 99c659cf345640fd0f733cbcaf4583cc2c868ec0 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 29 Apr 2013 13:21:48 +0200 -Subject: [PATCH] rt2x00: rt2800lib: add RFCSR initialization for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 + - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++ - 2 files changed, 142 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -2312,6 +2312,7 @@ struct mac_iveiv_entry { - /* - * RFCSR 2: - */ -+#define RFCSR2_RESCAL_BP FIELD8(0x40) - #define RFCSR2_RESCAL_EN FIELD8(0x80) - #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02) - #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20) ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7878,6 +7878,144 @@ static void rt2800_init_rfcsr_5350(struc - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - } - -+static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfcsr; -+ -+ /* TODO: get the actual ECO value from the SoC */ -+ const unsigned int eco = 5; -+ -+ rt2800_rf_init_calibration(rt2x00dev, 2); -+ -+ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0); -+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03); -+ rt2800_rfcsr_write(rt2x00dev, 2, 0x50); -+ rt2800_rfcsr_write(rt2x00dev, 3, 0x20); -+ rt2800_rfcsr_write(rt2x00dev, 4, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b); -+ rt2800_rfcsr_write(rt2x00dev, 9, 0x08); -+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3); -+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48); -+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a); -+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12); -+ rt2800_rfcsr_write(rt2x00dev, 14, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 15, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 16, 0x00); -+ -+ /* RFCSR 17 will be initialized later based on the -+ * frequency offset stored in the EEPROM -+ */ -+ -+ rt2800_rfcsr_write(rt2x00dev, 18, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 19, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 20, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 21, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20); -+ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0); -+ rt2800_rfcsr_write(rt2x00dev, 24, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 25, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 26, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 29, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10); -+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20); -+ rt2800_rfcsr_write(rt2x00dev, 35, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 37, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 38, 0x86); -+ rt2800_rfcsr_write(rt2x00dev, 39, 0x23); -+ rt2800_rfcsr_write(rt2x00dev, 40, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 41, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 42, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 43, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93); -+ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb); -+ rt2800_rfcsr_write(rt2x00dev, 46, 0x60); -+ rt2800_rfcsr_write(rt2x00dev, 47, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 48, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e); -+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86); -+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51); -+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05); -+ rt2800_rfcsr_write(rt2x00dev, 53, 0x76); -+ rt2800_rfcsr_write(rt2x00dev, 54, 0x76); -+ rt2800_rfcsr_write(rt2x00dev, 55, 0x76); -+ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb); -+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); -+ rt2800_rfcsr_write(rt2x00dev, 58, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 59, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 60, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 61, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 62, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 63, 0x00); -+ -+ /* TODO: rx filter calibration? */ -+ -+ rt2800_bbp_write(rt2x00dev, 137, 0x0f); -+ -+ rt2800_bbp_write(rt2x00dev, 163, 0x9d); -+ -+ rt2800_bbp_write(rt2x00dev, 105, 0x05); -+ -+ rt2800_bbp_write(rt2x00dev, 179, 0x02); -+ rt2800_bbp_write(rt2x00dev, 180, 0x00); -+ rt2800_bbp_write(rt2x00dev, 182, 0x40); -+ rt2800_bbp_write(rt2x00dev, 180, 0x01); -+ rt2800_bbp_write(rt2x00dev, 182, 0x9c); -+ -+ rt2800_bbp_write(rt2x00dev, 179, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 142, 0x04); -+ rt2800_bbp_write(rt2x00dev, 143, 0x3b); -+ rt2800_bbp_write(rt2x00dev, 142, 0x06); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa0); -+ rt2800_bbp_write(rt2x00dev, 142, 0x07); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa1); -+ rt2800_bbp_write(rt2x00dev, 142, 0x08); -+ rt2800_bbp_write(rt2x00dev, 143, 0xa2); -+ rt2800_bbp_write(rt2x00dev, 148, 0xc8); -+ -+ if (eco == 5) { -+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8); -+ rt2800_rfcsr_write(rt2x00dev, 33, 0x32); -+ } -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); -+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0); -+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); -+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); -+ msleep(1); -+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0); -+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); -+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); -+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); -+ rfcsr |= 0xc0; -+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); -+ rfcsr |= 0x20; -+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46); -+ rfcsr |= 0x20; -+ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr); -+ -+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); -+ rfcsr &= ~0xee; -+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); -+} -+ - static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) - { - rt2800_rf_init_calibration(rt2x00dev, 2); -@@ -8720,6 +8858,9 @@ static void rt2800_init_rfcsr(struct rt2 - case RT3390: - rt2800_init_rfcsr_3390(rt2x00dev); - break; -+ case RT3883: -+ rt2800_init_rfcsr_3883(rt2x00dev); -+ break; - case RT3572: - rt2800_init_rfcsr_3572(rt2x00dev); - break; diff --git a/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch deleted file mode 100644 index e74f399e65..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 86022438ffeb1b87dfcd018bf477fdbb43076691 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 8 May 2013 19:35:33 +0200 -Subject: [PATCH] rt2x00: rt2800lib: use the extended EEPROM map for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i - wiphy_name(rt2x00dev->hw->wiphy), word)) - return 0; - -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - map = rt2800_eeprom_map_ext; - else - map = rt2800_eeprom_map; diff --git a/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch deleted file mode 100644 index 62a199d61f..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 4cf5403f02fa65dc2207f61d223cffa9ae50e907 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 1 Aug 2013 14:48:21 +0200 -Subject: [PATCH] rt2x00: rt2800lib: force rf type to RF3853 on RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9254,6 +9254,8 @@ static int rt2800_init_eeprom(struct rt2 - rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID); - else if (rt2x00_rt(rt2x00dev, RT3352)) - rf = RF3322; -+ else if (rt2x00_rt(rt2x00dev, RT3883)) -+ rf = RF3853; - else if (rt2x00_rt(rt2x00dev, RT5350)) - rf = RF5350; - else diff --git a/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch deleted file mode 100644 index 2b0869099e..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch +++ /dev/null @@ -1,136 +0,0 @@ -From 269f19c848a2380db03a3f207cafb88e28d71c53 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:28 +0100 -Subject: [PATCH] rt2x00: rt2800lib: add channel configuration code for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++-- - 1 file changed, 69 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3902,6 +3902,36 @@ static char rt2800_txpower_to_dev(struct - return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); - } - -+static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev, -+ struct rf_channel *rf) -+{ -+ u8 bbp; -+ -+ bbp = (rf->channel > 14) ? 0x48 : 0x38; -+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 69, 0x12); -+ -+ if (rf->channel <= 14) { -+ rt2800_bbp_write(rt2x00dev, 70, 0x0a); -+ } else { -+ /* Disable CCK packet detection */ -+ rt2800_bbp_write(rt2x00dev, 70, 0x00); -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 73, 0x10); -+ -+ if (rf->channel > 14) { -+ rt2800_bbp_write(rt2x00dev, 62, 0x1d); -+ rt2800_bbp_write(rt2x00dev, 63, 0x1d); -+ rt2800_bbp_write(rt2x00dev, 64, 0x1d); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 62, 0x2d); -+ rt2800_bbp_write(rt2x00dev, 63, 0x2d); -+ rt2800_bbp_write(rt2x00dev, 64, 0x2d); -+ } -+} -+ - static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, -@@ -3920,6 +3950,12 @@ static void rt2800_config_channel(struct - rt2800_txpower_to_dev(rt2x00dev, rf->channel, - info->default_power3); - -+ switch (rt2x00dev->chip.rt) { -+ case RT3883: -+ rt3883_bbp_adjust(rt2x00dev, rf); -+ break; -+ } -+ - switch (rt2x00dev->chip.rf) { - case RF2020: - case RF3020: -@@ -4024,6 +4060,15 @@ static void rt2800_config_channel(struct - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 77, 0x98); -+ } else if (rt2x00_rt(rt2x00dev, RT3883)) { -+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); -+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); -+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); -+ -+ if (rt2x00dev->default_ant.rx_chain_num > 1) -+ rt2800_bbp_write(rt2x00dev, 86, 0x46); -+ else -+ rt2800_bbp_write(rt2x00dev, 86, 0); - } else { - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); -@@ -4037,6 +4082,7 @@ static void rt2800_config_channel(struct - !rt2x00_rt(rt2x00dev, RT6352)) { - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { - rt2800_bbp_write(rt2x00dev, 82, 0x62); -+ rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 75, 0x46); - } else { - if (rt2x00_rt(rt2x00dev, RT3593)) -@@ -4045,19 +4091,22 @@ static void rt2800_config_channel(struct - rt2800_bbp_write(rt2x00dev, 82, 0x84); - rt2800_bbp_write(rt2x00dev, 75, 0x50); - } -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - rt2800_bbp_write(rt2x00dev, 83, 0x8a); - } - - } else { - if (rt2x00_rt(rt2x00dev, RT3572)) - rt2800_bbp_write(rt2x00dev, 82, 0x94); -- else if (rt2x00_rt(rt2x00dev, RT3593)) -+ else if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - rt2800_bbp_write(rt2x00dev, 82, 0x82); - else if (!rt2x00_rt(rt2x00dev, RT6352)) - rt2800_bbp_write(rt2x00dev, 82, 0xf2); - -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - rt2800_bbp_write(rt2x00dev, 83, 0x9a); - - if (rt2x00_has_cap_external_lna_a(rt2x00dev)) -@@ -4190,6 +4239,23 @@ static void rt2800_config_channel(struct - - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - -+ usleep_range(1000, 1500); -+ } -+ -+ if (rt2x00_rt(rt2x00dev, RT3883)) { -+ if (!conf_is_ht40(conf)) -+ rt2800_bbp_write(rt2x00dev, 105, 0x34); -+ else -+ rt2800_bbp_write(rt2x00dev, 105, 0x04); -+ -+ /* AGC init */ -+ if (rf->channel <= 14) -+ reg = 0x2e + rt2x00dev->lna_gain; -+ else -+ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3); -+ -+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); -+ - usleep_range(1000, 1500); - } - diff --git a/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch deleted file mode 100644 index 48283ce709..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e37d93abaabe3ab72b0332a18092acc162307274 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 30 Sep 2013 13:57:26 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3889,13 +3889,15 @@ static char rt2800_txpower_to_dev(struct - unsigned int channel, - char txpower) - { -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC); - - if (channel <= 14) - return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER); - -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - return clamp_t(char, txpower, MIN_A_TXPOWER_3593, - MAX_A_TXPOWER_3593); - else diff --git a/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch deleted file mode 100644 index a764c91f1b..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch +++ /dev/null @@ -1,23 +0,0 @@ -From c4d79e344bd580d85821390d49f92dced7d8e125 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 24 Mar 2013 19:26:29 +0100 -Subject: [PATCH] rt2x00: rt2800lib: use correct txpower calculation function - for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5281,7 +5281,8 @@ static void rt2800_config_txpower(struct - struct ieee80211_channel *chan, - int power_level) - { -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); - else if (rt2x00_rt(rt2x00dev, RT6352)) - rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level); diff --git a/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch deleted file mode 100644 index 37239c31b2..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch +++ /dev/null @@ -1,33 +0,0 @@ -From caea0671cd8fd9ade4f5969cbe0ee545e94ae105 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sat, 24 Aug 2013 11:49:55 +0200 -Subject: [PATCH] rt2x00: rt2800lib: hardcode txmixer gain values to zero for - RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9136,7 +9136,8 @@ static u8 rt2800_get_txmixer_gain_24g(st - { - u16 word; - -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - return 0; - - word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG); -@@ -9150,7 +9151,8 @@ static u8 rt2800_get_txmixer_gain_5g(str - { - u16 word; - -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - return 0; - - word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A); diff --git a/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch deleted file mode 100644 index 197aabd7bc..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 11c40fb47c4a4dd6ad060c2ae127ced89ffb9fe1 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 18 Apr 2013 14:33:33 +0200 -Subject: [PATCH] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -591,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt - { - switch (rt2x00dev->chip.rt) { - case RT3593: -+ case RT3883: - *txwi_size = TXWI_DESC_SIZE_4WORDS; - *rxwi_size = RXWI_DESC_SIZE_5WORDS; - break; diff --git a/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch deleted file mode 100644 index 30da2cbb6e..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch +++ /dev/null @@ -1,22 +0,0 @@ -From fa5ad9c025610c22048add2f0ad03f62b6ca1e74 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 30 Sep 2013 16:53:33 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix antenna configuration for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2182,7 +2182,8 @@ void rt2800_config_ant(struct rt2x00_dev - rt2800_bbp_write(rt2x00dev, 3, r3); - rt2800_bbp_write(rt2x00dev, 1, r1); - -- if (rt2x00_rt(rt2x00dev, RT3593)) { -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) { - if (ant->rx_chain_num == 1) - rt2800_bbp_write(rt2x00dev, 86, 0x00); - else diff --git a/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch deleted file mode 100644 index 2514d824f2..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 6d668fef3a1baa60bdd715ee062ddb6333d2647c Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 30 Sep 2013 16:58:23 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix LNA gain configuration for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2205,7 +2205,8 @@ static void rt2800_config_lna_gain(struc - eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { -- if (rt2x00_rt(rt2x00dev, RT3593)) { -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) { - eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_EXT_LNA2_A1); -@@ -2215,7 +2216,8 @@ static void rt2800_config_lna_gain(struc - EEPROM_RSSI_BG2_LNA_A1); - } - } else { -- if (rt2x00_rt(rt2x00dev, RT3593)) { -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) { - eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); - lna_gain = rt2x00_get_field16(eeprom, - EEPROM_EXT_LNA2_A2); diff --git a/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch deleted file mode 100644 index 49393c2f6d..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch +++ /dev/null @@ -1,44 +0,0 @@ -From c49b2d829aa1c816a46a577cdec6d2ff14d9f06e Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Tue, 1 Oct 2013 15:40:08 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix VGC setup for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5534,7 +5534,8 @@ static u8 rt2800_get_default_vgc(struct - else - vgc = 0x2e + rt2x00dev->lna_gain; - } else { /* 5GHZ band */ -- if (rt2x00_rt(rt2x00dev, RT3593)) -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) - vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; - else if (rt2x00_rt(rt2x00dev, RT5592)) - vgc = 0x24 + (2 * rt2x00dev->lna_gain); -@@ -5554,7 +5555,8 @@ static inline void rt2800_set_vgc(struct - { - if (qual->vgc_level != vgc_level) { - if (rt2x00_rt(rt2x00dev, RT3572) || -- rt2x00_rt(rt2x00dev, RT3593)) { -+ rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) { - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, - vgc_level); - } else if (rt2x00_rt(rt2x00dev, RT5592)) { -@@ -5601,6 +5603,11 @@ void rt2800_link_tuner(struct rt2x00_dev - } - break; - -+ case RT3883: -+ if (qual->rssi > -65) -+ vgc += 0x10; -+ break; -+ - case RT5592: - if (qual->rssi > -65) - vgc += 0x20; diff --git a/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch deleted file mode 100644 index 1e1fb6e4b5..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 1616650aea676541d4dc8adc6f4219856d193c8b Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Tue, 1 Oct 2013 17:27:57 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++--- - 1 file changed, 6 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9269,7 +9269,8 @@ static int rt2800_validate_eeprom(struct - word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); -- if (!rt2x00_rt(rt2x00dev, RT3593)) { -+ if (!rt2x00_rt(rt2x00dev, RT3593) && -+ !rt2x00_rt(rt2x00dev, RT3883)) { - if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, -@@ -9289,7 +9290,8 @@ static int rt2800_validate_eeprom(struct - word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); -- if (!rt2x00_rt(rt2x00dev, RT3593)) { -+ if (!rt2x00_rt(rt2x00dev, RT3593) && -+ !rt2x00_rt(rt2x00dev, RT3883)) { - if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, -@@ -9297,7 +9299,8 @@ static int rt2800_validate_eeprom(struct - } - rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); - -- if (rt2x00_rt(rt2x00dev, RT3593)) { -+ if (rt2x00_rt(rt2x00dev, RT3593) || -+ rt2x00_rt(rt2x00dev, RT3883)) { - word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); - if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff) diff --git a/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch deleted file mode 100644 index 64dba012ec..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch +++ /dev/null @@ -1,22 +0,0 @@ -From e3871034a0e7c8a95152dc3eafbcc4535398cbdc Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 2 Oct 2013 10:11:59 +0200 -Subject: [PATCH] rt2x00: rt2800lib: fix txpower compensation for RT3883 - -Signed-off-by: Gabor Juhos ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4524,6 +4524,9 @@ static u8 rt2800_compensate_txpower(stru - if (rt2x00_rt(rt2x00dev, RT3593)) - return min_t(u8, txpower, 0xc); - -+ if (rt2x00_rt(rt2x00dev, RT3883)) -+ return min_t(u8, txpower, 0xf); -+ - if (rt2x00_has_cap_power_limit(rt2x00dev)) { - /* - * Check if eirp txpower exceed txpower_limit. -- 2.25.1