From 257bdb3f665117a6c5b34a4fd797778f98bd5d22 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 10 Aug 2016 15:17:20 +0530 Subject: [PATCH] ARM: dts: dra7xx-evm: add evm_3v3_sd regulator Add a node for evm_3v3_sd using onboard PCF GPIO expander which feeds on to mmc vdd. Update mapping for vmmc-supply and vmmc_aux-supply. evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines. Signed-off-by: Vignesh R Reviewed-by: Tom Rini --- arch/arm/dts/dra7-evm.dts | 12 +++++++++++- arch/arm/dts/dra72-evm.dts | 12 +++++++++++- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts index 06b7b367e4..fe755c0584 100644 --- a/arch/arm/dts/dra7-evm.dts +++ b/arch/arm/dts/dra7-evm.dts @@ -24,6 +24,15 @@ reg = <0x80000000 0x60000000>; /* 1536 MB */ }; + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; + }; + mmc2_3v3: fixedregulator-mmc2 { compatible = "regulator-fixed"; regulator-name = "mmc2_3v3"; @@ -468,7 +477,8 @@ &mmc1 { status = "okay"; - vmmc-supply = <&ldo1_reg>; + vmmc-supply = <&evm_3v3_sd>; + vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts index e78ec2e185..4ca37faa09 100644 --- a/arch/arm/dts/dra72-evm.dts +++ b/arch/arm/dts/dra72-evm.dts @@ -35,6 +35,15 @@ regulator-max-microvolt = <3300000>; }; + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; @@ -499,7 +508,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&ldo1_reg>; + vmmc_aux-supply = <&ldo1_reg>; + vmmc-supply = <&evm_3v3_sd>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode -- 2.25.1