From 23c3aa997b2e64b8c877152ce37ef63367e36967 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 14 Mar 2013 18:43:13 +0000 Subject: [PATCH] add vdsl userland app Signed-off-by: John Crispin SVN-Revision: 36022 --- package/platform/lantiq/ltq-vdsl-app/Makefile | 75 +++++ .../lantiq/ltq-vdsl-app/files/dsl_control | 311 ++++++++++++++++++ .../lantiq/ltq-vdsl-app/files/dsl_notify.sh | 44 +++ .../ltq-vdsl-app/patches/100-compat.patch | 26 ++ 4 files changed, 456 insertions(+) create mode 100644 package/platform/lantiq/ltq-vdsl-app/Makefile create mode 100644 package/platform/lantiq/ltq-vdsl-app/files/dsl_control create mode 100644 package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh create mode 100644 package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch diff --git a/package/platform/lantiq/ltq-vdsl-app/Makefile b/package/platform/lantiq/ltq-vdsl-app/Makefile new file mode 100644 index 0000000000..3de29d5205 --- /dev/null +++ b/package/platform/lantiq/ltq-vdsl-app/Makefile @@ -0,0 +1,75 @@ +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=ltq-vdsl-app +PKG_VERSION:=4.11.4 +PKG_RELEASE:=1 +PKG_BASE_NAME:=dsl_cpe_control_vrx +PKG_SOURCE:=$(PKG_BASE_NAME)-$(PKG_VERSION).tar.gz +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/dsl_cpe_control-$(PKG_VERSION) + +PKG_BUILD_DEPENDS:=kmod-ltq-vdsl-vr9 + +include $(INCLUDE_DIR)/package.mk + +define Package/ltq-vdsl-app + SECTION:=net + CATEGORY:=Network + TITLE:=Lantiq VDSL userland tool + URL:=http://www.lantiq.com/ + DEPENDS:=@TARGET_lantiq_xway +libpthread +endef + +define Package/ltq-vdsl-app/description + Userland tool needed to control Lantiq VDSL CPE +endef + +CONFIGURE_ARGS += \ + --with-max-device="1" \ + --with-lines-per-device="1" \ + --with-channels-per-line="1" \ + --enable-vrx \ + --enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \ + --enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \ + --enable-add-appl-cflags="-DMAX_CLI_PIPES=2" \ + --enable-ifxos \ + --enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \ + --enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \ + --enable-dsl-ceoc \ + --enable-dsl-pm-total \ + --enable-dsl-pm-showtime \ + --enable-dsl-pm-line-counters \ + --enable-dsl-pm-line-failure-counters \ + --enable-dsl-pm-datapath-counters \ + --enable-dsl-pm-datapath-failure-counters \ + --enable-deprecated \ + --disable-soap-support \ + --enable-dsl-bonding=no \ + --disable-dti + +ifeq ($(CONFIG_IFX_CLI),y) +CONFIGURE_ARGS += \ + --enable-cli-support +endif + +CONFIGURE_ARGS += --enable-model=full +#CONFIGURE_ARGS += --enable-model=lite +#CONFIGURE_ARGS += --enable-model=footprint +#CONFIGURE_ARGS += --enable-model=typical +#CONFIGURE_ARGS += --enable-model=debug + +define Package/ltq-vdsl-app/install + $(INSTALL_DIR) $(1)/etc/init.d + $(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/ + + $(INSTALL_DIR) $(1)/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control + $(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin +endef + +$(eval $(call BuildPackage,ltq-vdsl-app)) diff --git a/package/platform/lantiq/ltq-vdsl-app/files/dsl_control b/package/platform/lantiq/ltq-vdsl-app/files/dsl_control new file mode 100644 index 0000000000..0d7d32cb0b --- /dev/null +++ b/package/platform/lantiq/ltq-vdsl-app/files/dsl_control @@ -0,0 +1,311 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2012 OpenWrt.org + +START=99 + +EXTRA_COMMANDS="status lucistat" +EXTRA_HELP=" status Get DSL status information + lucistat Get status information if lua friendly format" + +SERVICE_DAEMONIZE=1 +SERVICE_WRITE_PID=1 + +# +# Basic functions to send CLI commands to the vdsl_cpe_control daemon +# +dsl_cmd() { + killall -0 vdsl_cpe_control && ( + echo "$@" > /tmp/pipe/dsl_cpe0_cmd + cat /tmp/pipe/dsl_cpe0_ack + ) +} +dsl_val() { + echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*') +} + +# +# Simple divide by 10 routine to cope with one decimal place +# +dbt() { + local a=$(expr $1 / 10) + local b=$(expr $1 % 10) + echo "${a}.${b}" +} +# +# Take a number and convert to k or meg +# +scale() { + local val=$1 + local a + local b + + if [ "$val" -gt 1000000 ]; then + a=$(expr $val / 1000) + b=$(expr $a % 1000) + a=$(expr $a / 1000) + printf "%d.%03d Mb" ${a} ${b} + elif [ "$val" -gt 1000 ]; then + a=$(expr $val / 1000) + printf "%d Kb" ${a} + else + echo "${val} b" + fi +} + +# +# Read the data rates for both directions +# +data_rates() { + local csg + local dru + local drd + local sdru + local sdrd + + csg=$(dsl_cmd g997csg 0 1) + drd=$(dsl_val "$csg" ActualDataRate) + + csg=$(dsl_cmd g997csg 0 0) + dru=$(dsl_val "$csg" ActualDataRate) + + [ -z "$drd" ] && drd=0 + [ -z "$dru" ] && dru=0 + + sdrd=$(scale $drd) + sdru=$(scale $dru) + + if [ "$action" = "lucistat" ]; then + echo "dsl.data_rate_down=$drd" + echo "dsl.data_rate_up=$dru" + echo "dsl.data_rate_down_s=\"$sdrd\"" + echo "dsl.data_rate_up_s=\"$sdru\"" + else + echo "Data Rate: ${sdrd}/s / ${sdru}/s" + fi +} + +# +# Chipset +# +chipset() { + local vig + local cs + local csv + + vig=$(dsl_cmd vig) + cs=$(dsl_val "$vig" DSL_ChipSetType) + csv=$(dsl_val "$vig" DSL_ChipSetHWVersion) + + if [ "$action" = "lucistat" ]; then + echo "dsl.chipset=\"${cs} ${csv}\"" + else + echo "Chipset: ${cs} ${csv}" + fi +} + +# +# Work out how long the line has been up +# +line_uptime() { + local ccsg + local et + local etr + local d + local h + local m + local s + local rc="" + + ccsg=$(dsl_cmd pmccsg 0 0 0) + et=$(dsl_val "$ccsg" nElapsedTime) + + [ -z "$et" ] && et=0 + + if [ "$action" = "lucistat" ]; then + echo "dsl.line_uptime=${et}" + return + fi + + d=$(expr $et / 86400) + etr=$(expr $et % 86400) + h=$(expr $etr / 3600) + etr=$(expr $etr % 3600) + m=$(expr $etr / 60) + s=$(expr $etr % 60) + + + [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s" + [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}" + [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}" + [ "${d}" -ne 0 ] && rc="${d}d ${rc}" + + [ -z "$rc" ] && rc="down" + echo "Line Uptime: ${rc}" +} + +# +# Get noise and attenuation figures +# +line_data() { + local lsg + local latnu + local latnd + local snru + local snrd + + lsg=$(dsl_cmd g997lsg 1 1) + latnd=$(dsl_val "$lsg" LATN) + snrd=$(dsl_val "$lsg" SNR) + + lsg=$(dsl_cmd g997lsg 0 1) + latnu=$(dsl_val "$lsg" LATN) + snru=$(dsl_val "$lsg" SNR) + + [ -z "$latnd" ] && latnd=0 + [ -z "$latnu" ] && latnu=0 + [ -z "$snrd" ] && snrd=0 + [ -z "$snru" ] && snru=0 + + latnd=$(dbt $latnd) + latnu=$(dbt $latnu) + snrd=$(dbt $snrd) + snru=$(dbt $snru) + + if [ "$action" = "lucistat" ]; then + echo "dsl.line_attenuation_down=$latnd" + echo "dsl.line_attenuation_up=$latnu" + echo "dsl.noise_margin_down=$snrd" + echo "dsl.noise_margin_up=$snru" + else + echo "Line Attenuation: ${latnd}dB / ${latnu}dB" + echo "Noise Margin: ${snrd}dB / ${snru}dB" + fi +} + +# +# Is the line up? Or what state is it in? +# +line_state() { + local lsg=$(dsl_cmd lsg) + local ls=$(dsl_val "$lsg" nLineState); + local s; + + case "$ls" in + "0x0") s="not initialized" ;; + "0x1") s="exception" ;; + "0x10") s="not updated" ;; + "0xff") s="idle request" ;; + "0x100") s="idle" ;; + "0x1ff") s="silent request" ;; + "0x200") s="silent" ;; + "0x300") s="handshake" ;; + "0x380") s="full_init" ;; + "0x400") s="discovery" ;; + "0x500") s="training" ;; + "0x600") s="analysis" ;; + "0x700") s="exchange" ;; + "0x800") s="showtime_no_sync" ;; + "0x801") s="showtime_tc_sync" ;; + "0x900") s="fastretrain" ;; + "0xa00") s="lowpower_l2" ;; + "0xb00") s="loopdiagnostic active" ;; + "0xb10") s="loopdiagnostic data exchange" ;; + "0xb20") s="loopdiagnostic data request" ;; + "0xc00") s="loopdiagnostic complete" ;; + "0x1000000") s="test" ;; + "0xd00") s="resync" ;; + "0x3c0") s="short init entry" ;; + "") s="not running daemon"; ls="0xfff" ;; + *) s="unknown" ;; + esac + + if [ $action = "lucistat" ]; then + echo "dsl.line_state_num=$ls" + echo "dsl.line_state_detail=\"$s\"" + if [ "$ls" = "0x801" ]; then + echo "dsl.line_state=\"UP\"" + else + echo "dsl.line_state=\"DOWN\"" + fi + else + if [ "$ls" = "0x801" ]; then + echo "Line State: UP [$ls: $s]" + else + echo "Line State: DOWN [$ls: $s]" + fi + fi +} + +# +# Main status routine +# +status() { + chipset + line_state + data_rates + line_data + line_uptime +} + +# +# Luci (lua) compatible version that's easy to parse +# +lucistat() { + echo "local dsl={}" + status + echo "return dsl" +} + + +annex_b=10_00_10_00_00_04_00_00 +annex_bdmt=10_00_00_00_00_00_00_00 +annex_b2=00_00_10_00_00_00_00_00 +annex_b2p=00_00_00_00_00_04_00_00 +annex_a=04_01_04_00_00_01_00_00 +annex_at1=01_00_00_00_00_00_00_00 +annex_alite=00_01_00_00_00_00_00_00 +annex_admt=04_00_00_00_00_00_00_00 +annex_a2=00_00_04_00_00_00_00_00 +annex_a2p=00_00_00_00_00_01_00_00 +annex_l=00_00_00_00_04_00_00_00 +annex_m=00_00_00_00_40_00_04_00 +annex_m2=00_00_00_00_40_00_00_00 +annex_m2p=00_00_00_00_00_00_04_00 + +# +# Simple start routine +# +start() { + local annex + local firmware + local xtu + config_load network + config_get annex wan annex + config_get firmware wan firmware + + # get xtu + eval "xtu=\"\${annex_$annex}\"" + + # check for firmware + [ -z "${firmware}" ] && + firmware=vdsl.bin + + # start CPE dsl daemon in the background + service_start /sbin/vdsl_cpe_control -i${xtu} \ + -n /sbin/dsl_notify.sh \ + -f /lib/firmware/${firmware} +} + +# +# For stop we want to simulate the notification call for when +# the line goes down, so that we can stop the ppp link before +# we die. +# +stop() { + DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \ + DSL_INTERFACE_STATUS="DOWN" \ + /sbin/dsl_notify.sh + + service_stop /sbin/vdsl_cpe_control +} + diff --git a/package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh b/package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh new file mode 100644 index 0000000000..5e9f3964e8 --- /dev/null +++ b/package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh @@ -0,0 +1,44 @@ +#!/bin/sh +# +# This script is called by dsl_cpe_control whenever there is a DSL event, +# we only actually care about the DSL_INTERFACE_STATUS events as these +# tell us the line has either come up or gone down. +# +# The rest of the code is basically the same at the atm hotplug code +# + +[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0 + +. /lib/functions.sh + +include /lib/network +scan_interfaces + +local found=0 +local ifc +for ifc in $interfaces; do + local up + config_get_bool up "$ifc" up 0 + + local auto + config_get_bool auto "$ifc" auto 1 + + local proto + config_get proto "$ifc" proto + + if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then + if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then + found=1 + ( sleep 1; ifup "$ifc" ) & + fi + else + if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then + found=1 + ( sleep 1; ifdown "$ifc" ) & + fi + fi +done + +if [ "$found" != 1 ]; then + logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)" +fi diff --git a/package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch b/package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch new file mode 100644 index 0000000000..da56232437 --- /dev/null +++ b/package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch @@ -0,0 +1,26 @@ +Index: dsl_cpe_control-4.11.4/src/dsl_cpe_init_cfg.c +=================================================================== +--- dsl_cpe_control-4.11.4.orig/src/dsl_cpe_init_cfg.c 2011-10-26 00:35:26.000000000 +0200 ++++ dsl_cpe_control-4.11.4/src/dsl_cpe_init_cfg.c 2012-11-28 15:53:10.857692092 +0100 +@@ -43,7 +43,7 @@ + { + DSL_CPE_LL_CFG_SET(-1, -1, DSL_DEV_HS_TONE_GROUP_VDSL2_B43, \ + DSL_DEV_HS_TONE_GROUP_VDSL2_B43, DSL_DEV_HS_TONE_GROUP_VDSL2_B43, \ +- 0x1E116000, 0x37, -1), ++ 0x1E116000, 0x3f, -1), + #endif + + #if defined(INCLUDE_DSL_CPE_API_VINAX) +Index: dsl_cpe_control-4.11.4/src/dsl_cpe_control.c +=================================================================== +--- dsl_cpe_control-4.11.4.orig/src/dsl_cpe_control.c 2012-01-13 15:15:34.000000000 +0100 ++++ dsl_cpe_control-4.11.4/src/dsl_cpe_control.c 2012-11-28 15:53:23.465692408 +0100 +@@ -6432,7 +6432,7 @@ + for (nDevice = 0; nDevice < DSL_CPE_MAX_DEVICE_NUMBER; nDevice++) + { + #if defined(INCLUDE_DSL_CPE_API_VINAX) || defined(INCLUDE_DSL_CPE_API_VRX) +- sprintf (device, "%s/%d", DSL_CPE_DEVICE_NAME, nDevice); ++ sprintf (device, "%s%d", DSL_CPE_DEVICE_NAME, nDevice); + #else + sprintf (device, "%s", DSL_CPE_DEVICE_NAME); + #endif /* defined(INCLUDE_DSL_CPE_API_VINAX) || defined(INCLUDE_DSL_CPE_API_VRX)*/ -- 2.25.1