From 20c04a13e6af0bc7c8e1d0a94f35260593329b80 Mon Sep 17 00:00:00 2001 From: Andy Polyakov Date: Thu, 26 Apr 2007 20:48:38 +0000 Subject: [PATCH] Reimplement rc4-586.pl, relicense rc4-x86_64.pl. --- crypto/rc4/asm/rc4-586.pl | 341 +++++++++++++++-------------------- crypto/rc4/asm/rc4-x86_64.pl | 15 +- 2 files changed, 154 insertions(+), 202 deletions(-) diff --git a/crypto/rc4/asm/rc4-586.pl b/crypto/rc4/asm/rc4-586.pl index 9766abfb6e..ef148b228c 100644 --- a/crypto/rc4/asm/rc4-586.pl +++ b/crypto/rc4/asm/rc4-586.pl @@ -1,14 +1,21 @@ -#!/usr/local/bin/perl +#!/usr/bin/env perl + +# ==================================================================== +# [Re]written by Andy Polyakov for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== # At some point it became apparent that the original SSLeay RC4 -# assembler implementation performs suboptimaly on latest IA-32 +# assembler implementation performs suboptimally on latest IA-32 # microarchitectures. After re-tuning performance has changed as # following: # -# Pentium +0% -# Pentium III +17% -# AMD +52%(*) -# P4 +180%(**) +# Pentium -10% +# Pentium III +12% +# AMD +50%(*) +# P4 +250%(**) # # (*) This number is actually a trade-off:-) It's possible to # achieve +72%, but at the cost of -48% off PIII performance. @@ -17,209 +24,136 @@ # For reference! This code delivers ~80% of rc4-amd64.pl # performance on the same Opteron machine. # (**) This number requires compressed key schedule set up by -# RC4_set_key and therefore doesn't apply to 0.9.7 [option for -# compressed key schedule is implemented in 0.9.8 and later, -# see commentary section in rc4_skey.c for further details]. +# RC4_set_key [see commentary below for further details]. # # -push(@INC,"perlasm","../../perlasm"); +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); require "x86asm.pl"; &asm_init($ARGV[0],"rc4-586.pl"); -$x="eax"; -$y="ebx"; +$xx="eax"; +$yy="ebx"; $tx="ecx"; $ty="edx"; -$in="esi"; -$out="edi"; -$d="ebp"; - -sub RC4_loop - { - local($n,$p,$char)=@_; - - &comment("Round $n"); - - if ($char) - { - if ($p >= 0) - { - &mov($ty, &swtmp(2)); - &cmp($ty, $in); - &jbe(&label("finished")); - &inc($in); - } - else - { - &add($ty, 8); - &inc($in); - &cmp($ty, $in); - &jb(&label("finished")); - &mov(&swtmp(2), $ty); - } - } - # Moved out - # &mov( $tx, &DWP(0,$d,$x,4)) if $p < 0; - - &add( &LB($y), &LB($tx)); - &mov( $ty, &DWP(0,$d,$y,4)); - # XXX - &mov( &DWP(0,$d,$x,4),$ty); - &add( $ty, $tx); - &mov( &DWP(0,$d,$y,4),$tx); - &and( $ty, 0xff); - &inc( &LB($x)); # NEXT ROUND - &mov( $tx, &DWP(0,$d,$x,4)) if $p < 1; # NEXT ROUND - &mov( $ty, &DWP(0,$d,$ty,4)); - - if (!$char) - { - #moved up into last round - if ($p >= 1) - { - &add( $out, 8) - } - &movb( &BP($n,"esp","",0), &LB($ty)); - } - else - { - # Note in+=8 has occured - &movb( &HB($ty), &BP(-1,$in,"",0)); - # XXX - &xorb(&LB($ty), &HB($ty)); - # XXX - &movb(&BP($n,$out,"",0),&LB($ty)); - } +$inp="esi"; +$out="ebp"; +$dat="edi"; + +sub RC4_loop { + my $i=shift; + my $func = ($i==0)?*mov:*or; + + &add (&LB($yy),&LB($tx)); + &mov ($ty,&DWP(0,$dat,$yy,4)); + &mov (&DWP(0,$dat,$yy,4),$tx); + &mov (&DWP(0,$dat,$xx,4),$ty); + &add ($ty,$tx); + &inc (&LB($xx)); + &and ($ty,0xff); + &ror ($out,8) if ($i!=0); + if ($i<3) { + &mov ($tx,&DWP(0,$dat,$xx,4)); + } else { + &mov ($tx,&wparam(3)); # reload [re-biased] out } + &$func ($out,&DWP(0,$dat,$ty,4)); +} - -&function_begin_B("RC4"); - { - local($name)=@_; - - - &mov($ty,&wparam(1)); # len - &cmp($ty,0); - &jne(&label("proceed")); - &ret(); - &set_label("proceed"); - - &comment(""); - - &push("ebp"); - &push("ebx"); - &push("esi"); - &xor( $x, $x); # avoid partial register stalls - &push("edi"); - &xor( $y, $y); # avoid partial register stalls - &mov( $d, &wparam(0)); # key - &mov( $in, &wparam(2)); - - &movb( &LB($x), &BP(0,$d,"",1)); - &movb( &LB($y), &BP(4,$d,"",1)); - - &mov( $out, &wparam(3)); - &inc( &LB($x)); - - &stack_push(3); # 3 temp variables - &add( $d, 8); - - # detect compressed schedule, see commentary section in rc4_skey.c... - # in 0.9.7 context ~50 bytes below RC4_CHAR label remain redundant, - # as compressed key schedule is set up in 0.9.8 and later. - &cmp(&DWP(256,$d),-1); - &je(&label("RC4_CHAR")); - - &lea( $ty, &DWP(-8,$ty,$in)); - - # check for 0 length input - - &mov( &swtmp(2), $ty); # this is now address to exit at - &mov( $tx, &DWP(0,$d,$x,4)); - - &cmp( $ty, $in); - &jb( &label("end")); # less than 8 bytes - - &set_label("start"); - - # filling DELAY SLOT - &add( $in, 8); - - &RC4_loop(0,-1,0); - &RC4_loop(1,0,0); - &RC4_loop(2,0,0); - &RC4_loop(3,0,0); - &RC4_loop(4,0,0); - &RC4_loop(5,0,0); - &RC4_loop(6,0,0); - &RC4_loop(7,1,0); - - &comment("apply the cipher text"); - # xor the cipher data with input - - #&add( $out, 8); #moved up into last round - - &mov( $tx, &swtmp(0)); - &mov( $ty, &DWP(-8,$in,"",0)); - &xor( $tx, $ty); - &mov( $ty, &DWP(-4,$in,"",0)); - &mov( &DWP(-8,$out,"",0), $tx); - &mov( $tx, &swtmp(1)); - &xor( $tx, $ty); - &mov( $ty, &swtmp(2)); # load end ptr; - &mov( &DWP(-4,$out,"",0), $tx); - &mov( $tx, &DWP(0,$d,$x,4)); - &cmp($in, $ty); - &jbe(&label("start")); - - &set_label("end"); - - # There is quite a bit of extra crap in RC4_loop() for this - # first round - &RC4_loop(0,-1,1); - &RC4_loop(1,0,1); - &RC4_loop(2,0,1); - &RC4_loop(3,0,1); - &RC4_loop(4,0,1); - &RC4_loop(5,0,1); - &RC4_loop(6,1,1); - - &jmp(&label("finished")); - - &align(16); - # this is essentially Intel P4 specific codepath, see rc4_skey.c, - # and is engaged in 0.9.8 and later context... - &set_label("RC4_CHAR"); - - &lea ($ty,&DWP(0,$in,$ty)); - &mov (&swtmp(2),$ty); - &movz ($tx,&BP(0,$d,$x)); - +# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out); +&function_begin("RC4"); + &mov ($dat,&wparam(0)); # load key schedule pointer + &mov ($ty, &wparam(1)); # load len + &mov ($inp,&wparam(2)); # load inp + &mov ($out,&wparam(3)); # load out + + &xor ($xx,$xx); # avoid partial register stalls + &xor ($yy,$yy); + + &cmp ($ty,0); # safety net + &je (&label("abort")); + + &mov (&LB($xx),&BP(0,$dat)); # load key->x + &mov (&LB($yy),&BP(4,$dat)); # load key->y + &add ($dat,8); + + &lea ($tx,&DWP(0,$inp,$ty)); + &sub ($out,$inp); # re-bias out + &mov (&wparam(1),$tx); # save input+len + + &inc (&LB($xx)); + + # detect compressed key schedule... + &cmp (&DWP(256,$dat),-1); + &je (&label("RC4_CHAR")); + + &mov ($tx,&DWP(0,$dat,$xx,4)); + + &and ($ty,-4); # how many 4-byte chunks? + &jz (&label("loop1")); + + &lea ($ty,&DWP(-4,$inp,$ty)); + &mov (&wparam(2),$ty); # save input+(len/4)*4-4 + &mov (&wparam(3),$out); # $out as accumulator in this loop + + &set_label("loop4",16); + for ($i=0;$i<4;$i++) { RC4_loop($i); } + &ror ($out,8); + &xor ($out,&DWP(0,$inp)); + &cmp ($inp,&wparam(2)); # compare to input+(len/4)*4-4 + &mov (&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here + &lea ($inp,&DWP(4,$inp)); + &mov ($tx,&DWP(0,$dat,$xx,4)); + &jb (&label("loop4")); + + &cmp ($inp,&wparam(1)); # compare to input+len + &je (&label("done")); + &mov ($out,&wparam(3)); # restore $out + + &set_label("loop1",16); + &add (&LB($yy),&LB($tx)); + &mov ($ty,&DWP(0,$dat,$yy,4)); + &mov (&DWP(0,$dat,$yy,4),$tx); + &mov (&DWP(0,$dat,$xx,4),$ty); + &add ($ty,$tx); + &inc (&LB($xx)); + &and ($ty,0xff); + &mov ($ty,&DWP(0,$dat,$ty,4)); + &xor (&LB($ty),&BP(0,$inp)); + &lea ($inp,&DWP(1,$inp)); + &mov ($tx,&DWP(0,$dat,$xx,4)); + &cmp ($inp,&wparam(1)); # compare to input+len + &mov (&BP(-1,$out,$inp),&LB($ty)); + &jb (&label("loop1")); + + &jmp (&label("done")); + +# this is essentially Intel P4 specific codepath... +&set_label("RC4_CHAR",16); + &movz ($tx,&BP(0,$dat,$xx)); # strangely enough unrolled loop performs over 20% slower... - &set_label("RC4_CHAR_loop"); - &add (&LB($y),&LB($tx)); - &movz ($ty,&BP(0,$d,$y)); - &movb (&BP(0,$d,$y),&LB($tx)); - &movb (&BP(0,$d,$x),&LB($ty)); + &set_label("cloop1"); + &add (&LB($yy),&LB($tx)); + &movz ($ty,&BP(0,$dat,$yy)); + &mov (&BP(0,$dat,$yy),&LB($tx)); + &mov (&BP(0,$dat,$xx),&LB($ty)); &add (&LB($ty),&LB($tx)); - &movz ($ty,&BP(0,$d,$ty)); - &add (&LB($x),1); - &xorb (&LB($ty),&BP(0,$in)); - &lea ($in,&BP(1,$in)); - &movz ($tx,&BP(0,$d,$x)); - &cmp ($in,&swtmp(2)); - &movb (&BP(0,$out),&LB($ty)); - &lea ($out,&BP(1,$out)); - &jb (&label("RC4_CHAR_loop")); - - &set_label("finished"); - &dec( $x); - &stack_pop(3); - &movb( &BP(-4,$d,"",0),&LB($y)); - &movb( &BP(-8,$d,"",0),&LB($x)); -} + &movz ($ty,&BP(0,$dat,$ty)); + &add (&LB($xx),1); + &xor (&LB($ty),&BP(0,$inp)); + &lea ($inp,&BP(1,$inp)); + &movz ($tx,&BP(0,$dat,$xx)); + &cmp ($inp,&wparam(1)); + &mov (&BP(-1,$out,$inp),&LB($ty)); + &jb (&label("cloop1")); + +&set_label("done"); + &dec (&LB($xx)); + &mov (&BP(-4,$dat),&LB($yy)); # save key->y + &mov (&BP(-8,$dat),&LB($xx)); # save key->x +&set_label("abort"); &function_end("RC4"); ######################################################################## @@ -271,6 +205,17 @@ $idx="edx"; &jnc (&label("w2ndloop")); &jmp (&label("exit")); +# Unlike all other x86 [and x86_64] implementations, Intel P4 core +# [including EM64T] was found to perform poorly with above "32-bit" key +# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded +# assembler turned out to be 3.5x if re-coded for compressed 8-bit one, +# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit +# schedule for x86[_64], because non-P4 implementations suffer from +# significant performance losses then, e.g. PIII exhibits >2x +# deterioration, and so does Opteron. In order to assure optimal +# all-round performance, we detect P4 at run-time and set up compressed +# key schedule, which is recognized by RC4 procedure. + &set_label("c1stloop",16); &mov (&BP(0,$out,"eax"),&LB("eax")); # key->data[i]=i; &add (&LB("eax"),1); # i++; @@ -315,9 +260,9 @@ $idx="edx"; &set_label("skip"); &ret (); &set_label("opts",64); -&asciz ("rc4(8x,int)"); +&asciz ("rc4(4x,int)"); &asciz ("rc4(1x,char)"); -&asciz ("RC4 for x86, OpenSSL project"); # RC4_version +&asciz ("RC4 for x86, CRYPTOGAMS by "); &align (64); &function_end_B("RC4_options"); diff --git a/crypto/rc4/asm/rc4-x86_64.pl b/crypto/rc4/asm/rc4-x86_64.pl index 36a9429ef7..2d47320485 100755 --- a/crypto/rc4/asm/rc4-x86_64.pl +++ b/crypto/rc4/asm/rc4-x86_64.pl @@ -2,8 +2,9 @@ # # ==================================================================== # Written by Andy Polyakov for the OpenSSL -# project. Rights for redistribution and usage in source and binary -# forms are granted according to the OpenSSL license. +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. # ==================================================================== # # 2.22x RC4 tune-up:-) It should be noted though that my hand [as in @@ -58,7 +59,13 @@ # this CPU. $output=shift; -open STDOUT,"| $^X ../perlasm/x86_64-xlate.pl $output"; + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or +die "can't locate x86_64-xlate.pl"; + +open STDOUT,"| $^X $xlate $output"; $dat="%rdi"; # arg1 $len="%rsi"; # arg2 @@ -345,7 +352,7 @@ RC4_options: .asciz "rc4(8x,int)" .asciz "rc4(8x,char)" .asciz "rc4(1x,char)" -.asciz "RC4 for x86_64, OpenSSL project" +.asciz "RC4 for x86_64, CRYPTOGAMS by " .align 64 .size RC4_options,.-RC4_options ___ -- 2.25.1