From 1e6c8b3a4e00666995efaf841fd4bb1c9ad552d8 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Sat, 11 May 2013 00:49:41 +0200 Subject: [PATCH] remove ar5416phy.h, we do not use it Signed-off-by: Oleksij Rempel --- target_firmware/wlan/ar5416_hw.c | 1 - target_firmware/wlan/ar5416phy.h | 460 ------------------------------- 2 files changed, 461 deletions(-) delete mode 100755 target_firmware/wlan/ar5416phy.h diff --git a/target_firmware/wlan/ar5416_hw.c b/target_firmware/wlan/ar5416_hw.c index 5d9b3f3..1261565 100644 --- a/target_firmware/wlan/ar5416_hw.c +++ b/target_firmware/wlan/ar5416_hw.c @@ -38,7 +38,6 @@ #include "ah_internal.h" #include "ar5416.h" #include "ar5416reg.h" -#include "ar5416phy.h" #include "ar5416desc.h" #define N(a) (sizeof(a)/sizeof(a[0])) diff --git a/target_firmware/wlan/ar5416phy.h b/target_firmware/wlan/ar5416phy.h deleted file mode 100755 index 9733f58..0000000 --- a/target_firmware/wlan/ar5416phy.h +++ /dev/null @@ -1,460 +0,0 @@ -/* - * Copyright (c) 2013 Qualcomm Atheros, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted (subject to the limitations in the - * disclaimer below) provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the - * distribution. - * - * * Neither the name of Qualcomm Atheros nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE - * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT - * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * Copyright (c) 2002-2005 Atheros Communications, Inc. - * All rights reserved. - * - * $Id: //depot/sw/branches/fusion_usb/target_firmware/wlan/target/hal/main/ar5416/ar5416phy.h#1 $ - */ -#ifndef _DEV_ATH_AR5416PHY_H_ -#define _DEV_ATH_AR5416PHY_H_ - -/* PHY registers */ -#define AR_PHY_BASE 0x9800 /* base address of phy regs */ -#define AR_PHY(_n) (AR_PHY_BASE + ((_n)<<2)) - -#define AR_PHY_TEST 0x9800 /* PHY test control */ -#define PHY_AGC_CLR 0x10000000 /* disable AGC to A2 */ -#define RFSILENT_BB 0x00002000 /* shush bb */ - -/* TX99_11N_CHANGE begin */ -#define AR_PHY_TESTCTRL 0x9808 /* PHY Test Control/Status */ -#define AR_PHY_TESTCTRL_TXHOLD 0x3800 /* Select Tx hold */ -#define AR_PHY_TESTCTRL_TXSRC_ALT 0x00000080 /* Select input to tsdac along with bit 1 */ -#define AR_PHY_TESTCTRL_TXSRC_ALT_S 7 -#define AR_PHY_TESTCTRL_TXSRC_SRC 0x00000002 /* Used with bit 7 */ -#define AR_PHY_TESTCTRL_TXSRC_SRC_S 1 -/* TX99_11N_CHANGE end */ - - -#define AR_PHY_TURBO 0x9804 /* frame control register */ -#define AR_PHY_FC_TURBO_MODE 0x00000001 /* Set turbo mode bits */ -#define AR_PHY_FC_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode setting */ -#define AR_PHY_FC_DYN2040_EN 0x00000004 /* Enable dyn 20/40 mode */ -#define AR_PHY_FC_DYN2040_PRI_ONLY 0x00000008 /* dyn 20/40 - primary only */ -#define AR_PHY_FC_DYN2040_PRI_CH 0x00000010 /* dyn 20/40 - primary ch offset (0=+10MHz, 1=-10MHz)*/ -#define AR_PHY_FC_DYN2040_EXT_CH 0x00000020 /* dyn 20/40 - ext ch spacing (0=20MHz/ 1=25MHz) */ -#define AR_PHY_FC_HT_EN 0x00000040 /* ht enable */ -#define AR_PHY_FC_SHORT_GI_40 0x00000080 /* allow short GI for HT 40 */ -#define AR_PHY_FC_WALSH 0x00000100 /* walsh spatial spreading for 2 chains,2 streams TX */ -#define AR_PHY_FC_SINGLE_HT_LTF1 0x00000200 /* single length (4us) 1st HT long training symbol */ - -#define AR_PHY_TIMING2 0x9810 /* Timing Control 2 */ -#define AR_PHY_TIMING2_USE_FORCE 0x00001000 -#define AR_PHY_TIMING2_FORCE_VAL 0x00000fff - -#define AR_PHY_TIMING3 0x9814 /* Timing control 3 */ -#define AR_PHY_TIMING3_DSC_MAN 0xFFFE0000 -#define AR_PHY_TIMING3_DSC_MAN_S 17 -#define AR_PHY_TIMING3_DSC_EXP 0x0001E000 -#define AR_PHY_TIMING3_DSC_EXP_S 13 - -#define AR_PHY_CHIP_ID 0x9818 /* PHY chip revision ID */ -#define AR_PHY_CHIP_ID_REV_0 0x80 /* 5416 Rev 0 (owl 1.0) BB */ -#define AR_PHY_CHIP_ID_REV_1 0x81 /* 5416 Rev 1 (owl 2.0) BB */ -#define AR_PHY_CHIP_ID_SOWL_REV_0 0xb0 /* 9160 Rev 0 (sowl 1.0) BB */ - -#define AR_PHY_ACTIVE 0x981C /* activation register */ -#define AR_PHY_ACTIVE_EN 0x00000001 /* Activate PHY chips */ -#define AR_PHY_ACTIVE_DIS 0x00000000 /* Deactivate PHY chips */ - -#define AR_PHY_RF_CTL2 0x9824 -#define AR_PHY_TX_END_DATA_START 0x000000FF -#define AR_PHY_TX_END_DATA_START_S 0 -#define AR_PHY_TX_END_PA_ON 0x0000FF00 -#define AR_PHY_TX_END_PA_ON_S 8 - - -#define AR_PHY_RF_CTL3 0x9828 -#define AR_PHY_TX_END_TO_A2_RX_ON 0x00FF0000 -#define AR_PHY_TX_END_TO_A2_RX_ON_S 16 - -#define AR_PHY_ADC_CTL 0x982C -#define AR_PHY_ADC_CTL_OFF_INBUFGAIN 0x00000003 -#define AR_PHY_ADC_CTL_OFF_INBUFGAIN_S 0 -#define AR_PHY_ADC_CTL_OFF_PWDDAC 0x00002000 -#define AR_PHY_ADC_CTL_OFF_PWDBANDGAP 0x00004000 /* BB Rev 4.2+ only */ -#define AR_PHY_ADC_CTL_OFF_PWDADC 0x00008000 /* BB Rev 4.2+ only */ -#define AR_PHY_ADC_CTL_ON_INBUFGAIN 0x00030000 -#define AR_PHY_ADC_CTL_ON_INBUFGAIN_S 16 - -#define AR_PHY_ADC_SERIAL_CTL 0x9830 -#define AR_PHY_SEL_INTERNAL_ADDAC 0x00000000 -#define AR_PHY_SEL_EXTERNAL_RADIO 0x00000001 - -#define AR_PHY_RF_CTL4 0x9834 -#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF 0xFF000000 -#define AR_PHY_RF_CTL4_TX_END_XPAB_OFF_S 24 -#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF 0x00FF0000 -#define AR_PHY_RF_CTL4_TX_END_XPAA_OFF_S 16 -#define AR_PHY_RF_CTL4_FRAME_XPAB_ON 0x0000FF00 -#define AR_PHY_RF_CTL4_FRAME_XPAB_ON_S 8 -#define AR_PHY_RF_CTL4_FRAME_XPAA_ON 0x000000FF -#define AR_PHY_RF_CTL4_FRAME_XPAA_ON_S 0 - -/* TX99_11N_CHANGE begin */ -#define AR_PHY_BB_XP_PA_CTL 0x9838 -#define AR_PHY_BB_XPAA_ACTIVE_HIGH 0x00000001 -#define AR_PHY_BB_XPAB_ACTIVE_HIGH 0x00000002 -#define AR_PHY_BB_XPAB_ACTIVE_HIGH_S 1 - -#define AR_PHY_TSTDAC_CONST 0x983C -#define AR_PHY_TSTDAC_CONST_Q 0x0003FE00 -#define AR_PHY_TSTDAC_CONST_Q_S 9 -#define AR_PHY_TSTDAC_CONST_I 0x000001FF -/* TX99_11N_CHANGE end */ - -#define AR_PHY_SETTLING 0x9844 -#define AR_PHY_SETTLING_SWITCH 0x00003F80 -#define AR_PHY_SETTLING_SWITCH_S 7 - -#define AR_PHY_RXGAIN 0x9848 -#define AR_PHY_RXGAIN_TXRX_ATTEN 0x0003F000 -#define AR_PHY_RXGAIN_TXRX_ATTEN_S 12 -#define AR_PHY_RXGAIN_TXRX_RF_MAX 0x007C0000 -#define AR_PHY_RXGAIN_TXRX_RF_MAX_S 18 - -#define AR_PHY_DESIRED_SZ 0x9850 -#define AR_PHY_DESIRED_SZ_ADC 0x000000FF -#define AR_PHY_DESIRED_SZ_ADC_S 0 -#define AR_PHY_DESIRED_SZ_PGA 0x0000FF00 -#define AR_PHY_DESIRED_SZ_PGA_S 8 -#define AR_PHY_DESIRED_SZ_TOT_DES 0x0FF00000 -#define AR_PHY_DESIRED_SZ_TOT_DES_S 20 - -#define AR_PHY_FIND_SIG 0x9858 -#define AR_PHY_FIND_SIG_FIRSTEP 0x0003F000 -#define AR_PHY_FIND_SIG_FIRSTEP_S 12 -#define AR_PHY_FIND_SIG_FIRPWR 0x03FC0000 -#define AR_PHY_FIND_SIG_FIRPWR_S 18 - -#define AR_PHY_AGC_CTL1 0x985C -#define AR_PHY_AGC_CTL1_COARSE_LOW 0x00007F80 -#define AR_PHY_AGC_CTL1_COARSE_LOW_S 7 -#define AR_PHY_AGC_CTL1_COARSE_HIGH 0x003F8000 -#define AR_PHY_AGC_CTL1_COARSE_HIGH_S 15 - -#define AR_PHY_AGC_CONTROL 0x9860 /* chip calibration and noise floor setting */ -#define AR_PHY_AGC_CONTROL_CAL 0x00000001 /* do internal calibration */ -#define AR_PHY_AGC_CONTROL_NF 0x00000002 /* do noise-floor calculation */ - -#define AR_PHY_CCA 0x9864 -#define AR_PHY_MINCCA_PWR 0x0FF80000 -#define AR_PHY_MINCCA_PWR_S 19 -#define AR_PHY_CCA_THRESH62 0x0007F000 -#define AR_PHY_CCA_THRESH62_S 12 - -#define AR_PHY_SFCORR_LOW 0x986C -#define AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW 0x00000001 -#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW 0x00003F00 -#define AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW_S 8 -#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW 0x001FC000 -#define AR_PHY_SFCORR_LOW_M1_THRESH_LOW_S 14 -#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW 0x0FE00000 -#define AR_PHY_SFCORR_LOW_M2_THRESH_LOW_S 21 - -#define AR_PHY_SFCORR 0x9868 -#define AR_PHY_SFCORR_M2COUNT_THR 0x0000001F -#define AR_PHY_SFCORR_M2COUNT_THR_S 0 -#define AR_PHY_SFCORR_M1_THRESH 0x00FE0000 -#define AR_PHY_SFCORR_M1_THRESH_S 17 -#define AR_PHY_SFCORR_M2_THRESH 0x7F000000 -#define AR_PHY_SFCORR_M2_THRESH_S 24 - -#define AR_PHY_SLEEP_CTR_CONTROL 0x9870 -#define AR_PHY_SLEEP_CTR_LIMIT 0x9874 -#define AR_PHY_SLEEP_SCAL 0x9878 - -#define AR_PHY_PLL_CTL 0x987c /* PLL control register */ -#define AR_PHY_PLL_CTL_40 0xaa /* 40 MHz */ -#define AR_PHY_PLL_CTL_40_5413 0x04 -#define AR_PHY_PLL_CTL_44 0xab /* 44 MHz for 11b, 11g */ -#define AR_PHY_PLL_CTL_44_2133 0xeb /* 44 MHz for 11b, 11g */ -#define AR_PHY_PLL_CTL_40_2133 0xea /* 40 MHz for 11a, turbos */ - -#define AR_PHY_RX_DELAY 0x9914 /* analog pow-on time (100ns) */ -#define AR_PHY_RX_DELAY_DELAY 0x00003FFF /* delay from wakeup to rx ena */ - -#define AR_PHY_TIMING_CTRL4(_i) (0x9920 + ((_i) << 12)) /* timing control */ -#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF 0x01F /* Mask for kcos_theta-1 for q correction */ -#define AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF_S 0 /* shift for Q_COFF */ -#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF 0x7E0 /* Mask for sin_theta for i correction */ -#define AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF_S 5 /* Shift for sin_theta for i correction */ -#define AR_PHY_TIMING_CTRL4_IQCORR_ENABLE 0x800 /* enable IQ correction */ -#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX 0xF000 /* Mask for max number of samples (logarithmic) */ -#define AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX_S 12 /* Shift for max number of samples */ -#define AR_PHY_TIMING_CTRL4_DO_IQCAL 0x10000 /* perform IQ calibration */ - -#define AR_PHY_TIMING5 0x9924 -#define AR_PHY_TIMING5_CYCPWR_THR1 0x000000FE -#define AR_PHY_TIMING5_CYCPWR_THR1_S 1 - -#define AR_PHY_POWER_TX_RATE1 0x9934 -#define AR_PHY_POWER_TX_RATE2 0x9938 -#define AR_PHY_POWER_TX_RATE_MAX 0x993c -#define AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE 0x00000040 - -#define AR_PHY_FRAME_CTL 0x9944 -#define AR_PHY_FRAME_CTL_TX_CLIP 0x00000038 -#define AR_PHY_FRAME_CTL_TX_CLIP_S 3 - -#define AR_PHY_TXPWRADJ 0x994C /* BB Rev 4.2+ only */ -#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA 0x00000FC0 -#define AR_PHY_TXPWRADJ_CCK_GAIN_DELTA_S 6 -#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX 0x00FC0000 -#define AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX_S 18 - -#define AR_PHY_RADAR_0 0x9954 /* radar detection settings */ -#define AR_PHY_RADAR_0_ENA 0x00000001 /* Enable radar detection */ -#define AR_PHY_RADAR_0_INBAND 0x0000003e /* Inband pulse threshold */ -#define AR_PHY_RADAR_0_INBAND_S 1 -#define AR_PHY_RADAR_0_PRSSI 0x00000FC0 /* Pulse rssi threshold */ -#define AR_PHY_RADAR_0_PRSSI_S 6 -#define AR_PHY_RADAR_0_HEIGHT 0x0003F000 /* Pulse height threshold */ -#define AR_PHY_RADAR_0_HEIGHT_S 12 -#define AR_PHY_RADAR_0_RRSSI 0x00FC0000 /* Radar rssi threshold */ -#define AR_PHY_RADAR_0_RRSSI_S 18 -#define AR_PHY_RADAR_0_FIRPWR 0x7F000000 /* Radar firpwr threshold */ -#define AR_PHY_RADAR_0_FIRPWR_S 24 - -#define AR_PHY_RADAR_1 0x9958 /* AR5413+ radar settigns */ -#define AR_PHY_RADAR_1_RELPWR_ENA 0x00800000 /* enable to check radar relative power */ -#define AR_PHY_RADAR_1_USE_FIR128 0x00400000 /* enable to use the average inband power - * measured over 128 cycles - */ -#define AR_PHY_RADAR_1_RELPWR_THRESH 0x003F0000 /* relative pwr thresh */ -#define AR_PHY_RADAR_1_RELPWR_THRESH_S 16 -#define AR_PHY_RADAR_1_BLOCK_CHECK 0x00008000 /* Enable to block radar check if weak - * OFDM sig or pkt is immediately after - * tx to rx transition - */ -#define AR_PHY_RADAR_1_MAX_RRSSI 0x00004000 /* Enable to use max rssi */ -#define AR_PHY_RADAR_1_RELSTEP_CHECK 0x00002000 /* Enable to use pulse relative step check */ -#define AR_PHY_RADAR_1_RELSTEP_THRESH 0x00001F00 /* Pulse relative step threshold */ -#define AR_PHY_RADAR_1_RELSTEP_THRESH_S 8 -#define AR_PHY_RADAR_1_MAXLEN 0x000000FF /* Max length of radar pulse */ -#define AR_PHY_RADAR_1_MAXLEN_S 0 - -#define AR_PHY_SWITCH_CHAIN_0 0x9960 -#define AR_PHY_SWITCH_COM 0x9964 - -#define AR_PHY_SIGMA_DELTA 0x996C /* AR5312 only */ -#define AR_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 -#define AR_PHY_SIGMA_DELTA_ADC_SEL_S 0 -#define AR_PHY_SIGMA_DELTA_FILT2 0x000000F8 -#define AR_PHY_SIGMA_DELTA_FILT2_S 3 -#define AR_PHY_SIGMA_DELTA_FILT1 0x00001F00 -#define AR_PHY_SIGMA_DELTA_FILT1_S 8 -#define AR_PHY_SIGMA_DELTA_ADC_CLIP 0x01FFE000 -#define AR_PHY_SIGMA_DELTA_ADC_CLIP_S 13 - -#define AR_PHY_RESTART 0x9970 /* restart */ -#define AR_PHY_RESTART_DIV_GC 0x001C0000 /* bb_ant_fast_div_gc_limit */ -#define AR_PHY_RESTART_DIV_GC_S 18 - -#define AR_PHY_RFBUS_REQ 0x997C -#define AR_PHY_RFBUS_REQ_EN 0x00000001 - -#define AR_PHY_RX_CHAINMASK 0x99a4 - -#define AR_PHY_EXT_CCA 0x99bc -#define AR_PHY_EXT_CCA_THRESH62 0x007F0000 // [22:16] not replicated -#define AR_PHY_EXT_CCA_THRESH62_S 16 -#define AR_PHY_EXT_MINCCA_PWR 0xFF800000 -#define AR_PHY_EXT_MINCCA_PWR_S 23 - -#define AR_PHY_HALFGI 0x99D0 /* Timing control 3 */ -#define AR_PHY_HALFGI_DSC_MAN 0x0007FFF0 -#define AR_PHY_HALFGI_DSC_MAN_S 4 -#define AR_PHY_HALFGI_DSC_EXP 0x0000000F -#define AR_PHY_HALFGI_DSC_EXP_S 0 - -#define AR_PHY_HEAVY_CLIP_ENABLE 0x99E0 - -#define AR_PHY_M_SLEEP 0x99f0 /* sleep control registers */ -#define AR_PHY_REFCLKDLY 0x99f4 -#define AR_PHY_REFCLKPD 0x99f8 - -#define AR_PHY_CALMODE 0x99f0 -/* PHY IQ calibration results */ -#define AR_PHY_IQCAL_RES_PWR_MEAS_I(_i) (0x9c10 + ((_i) << 12)) /* power measurement for I */ -#define AR_PHY_IQCAL_RES_PWR_MEAS_Q(_i) (0x9c14 + ((_i) << 12)) /* power measurement for Q */ -#define AR_PHY_IQCAL_RES_IQ_CORR_MEAS(_i) (0x9c18 + ((_i) << 12)) /* IQ correlation measurement */ - -#define AR_PHY_CURRENT_RSSI 0x9c1c /* rssi of current frame rx'd */ - -#define AR_PHY_RFBUS_GRANT 0x9C20 -#define AR_PHY_RFBUS_GRANT_EN 0x00000001 - -#define AR_PHY_MODE 0xA200 /* Mode register */ -#define AR_PHY_MODE_AR2133 0x08 /* AR2133 */ -#define AR_PHY_MODE_AR5111 0x00 /* AR5111/AR2111 */ -#define AR_PHY_MODE_AR5112 0x08 /* AR5112*/ -#define AR_PHY_MODE_DYNAMIC 0x04 /* dynamic CCK/OFDM mode */ -#define AR_PHY_MODE_RF2GHZ 0x02 /* 2.4 GHz */ -#define AR_PHY_MODE_RF5GHZ 0x00 /* 5 GHz */ -#define AR_PHY_MODE_CCK 0x01 /* CCK */ -#define AR_PHY_MODE_OFDM 0x00 /* OFDM */ - -#define AR_PHY_CCK_TX_CTRL 0xA204 -#define AR_PHY_CCK_TX_CTRL_JAPAN 0x00000010 - -#define AR_PHY_CCK_DETECT 0xA208 -#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK 0x0000003F -#define AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK_S 0 -#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME 0x00001FC0 // [12:6] settling time for antenna switch -#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME_S 6 -#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV 0x2000 - -#define AR_PHY_GAIN_2GHZ 0xA20C -#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN 0x00FC0000 -#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN_S 18 -#define AR_PHY_GAIN_2GHZ_BSW_MARGIN 0x00003C00 -#define AR_PHY_GAIN_2GHZ_BSW_MARGIN_S 10 -#define AR_PHY_GAIN_2GHZ_BSW_ATTEN 0x0000001F -#define AR_PHY_GAIN_2GHZ_BSW_ATTEN_S 0 - -#define AR_PHY_CCK_RXCTRL4 0xA21C -#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT 0x01F80000 -#define AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT_S 19 - -#define AR_PHY_DAG_CTRLCCK 0xA228 -#define AR_PHY_DAG_CTRLCCK_EN_RSSI_THR 0x00000200 /* BB Rev 4.2+ only */ -#define AR_PHY_DAG_CTRLCCK_RSSI_THR 0x0001FC00 /* BB Rev 4.2+ only */ -#define AR_PHY_DAG_CTRLCCK_RSSI_THR_S 10 /* BB Rev 4.2+ only */ - -#define AR_PHY_POWER_TX_RATE3 0xA234 -#define AR_PHY_POWER_TX_RATE4 0xA238 - -#define AR_PHY_SCRM_SEQ_XR 0xA23C -#define AR_PHY_HEADER_DETECT_XR 0xA240 -#define AR_PHY_CHIRP_DETECTED_XR 0xA244 -#define AR_PHY_BLUETOOTH 0xA254 - -#define AR_PHY_TPCRG1 0xA258 /* ar2413 power control */ -#define AR_PHY_TPCRG1_NUM_PD_GAIN 0x0000c000 -#define AR_PHY_TPCRG1_NUM_PD_GAIN_S 14 - -#define AR_PHY_TPCRG1_PD_GAIN_1 0x00030000 -#define AR_PHY_TPCRG1_PD_GAIN_1_S 16 -#define AR_PHY_TPCRG1_PD_GAIN_2 0x000C0000 -#define AR_PHY_TPCRG1_PD_GAIN_2_S 18 -#define AR_PHY_TPCRG1_PD_GAIN_3 0x00300000 -#define AR_PHY_TPCRG1_PD_GAIN_3_S 20 -// - -#define AR_PHY_ANALOG_SWAP 0xa268 -#define AR_PHY_SWAP_ALT_CHAIN 0x00000040 - -#define AR_PHY_TPCRG5 0xA26C /* ar2413 power control */ -#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP 0x0000000F -#define AR_PHY_TPCRG5_PD_GAIN_OVERLAP_S 0 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1 0x000003F0 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1_S 4 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2 0x0000FC00 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2_S 10 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3 0x003F0000 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3_S 16 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4 0x0FC00000 -#define AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4_S 22 - -#define AR_PHY_POWER_TX_RATE5 0xA38C -#define AR_PHY_POWER_TX_RATE6 0xA390 - -#define AR_PHY_CAL_CHAINMASK 0xA39C - -#define AR_PHY_POWER_TX_SUB 0xA3C8 -#define AR_PHY_POWER_TX_RATE7 0xA3CC -#define AR_PHY_POWER_TX_RATE8 0xA3D0 -#define AR_PHY_POWER_TX_RATE9 0xA3D4 - -#define AR_PHY_CH1_CCA 0xa864 -#define AR_PHY_CH1_MINCCA_PWR 0x0FF80000 -#define AR_PHY_CH1_MINCCA_PWR_S 19 - -#define AR_PHY_CH2_CCA 0xb864 -#define AR_PHY_CH2_MINCCA_PWR 0x0FF80000 -#define AR_PHY_CH2_MINCCA_PWR_S 19 - -#define AR_PHY_CH1_EXT_CCA 0xa9bc -#define AR_PHY_CH1_EXT_MINCCA_PWR 0xFF800000 -#define AR_PHY_CH1_EXT_MINCCA_PWR_S 23 - -#define AR_PHY_CH2_EXT_CCA 0xb9bc -#define AR_PHY_CH2_EXT_MINCCA_PWR 0xFF800000 -#define AR_PHY_CH2_EXT_MINCCA_PWR_S 23 - - -#ifdef MAGPIE_MERLIN - -#define AR9280_PHY_RXGAIN_TXRX_ATTEN 0x00003F80 -#define AR9280_PHY_RXGAIN_TXRX_ATTEN_S 7 -#define AR9280_PHY_RXGAIN_TXRX_MARGIN 0x001FC000 -#define AR9280_PHY_RXGAIN_TXRX_MARGIN_S 14 - -#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 /* Enable noise floor calibration to happen */ -#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* Don't update noise floor automatically */ - -#define AR9280_PHY_MINCCA_PWR 0x1FF00000 -#define AR9280_PHY_MINCCA_PWR_S 20 -#define AR9280_PHY_CCA_THRESH62 0x000FF000 -#define AR9280_PHY_CCA_THRESH62_S 12 - -#define AR_PHY_CCA_MAX_GOOD_VALUE -85 -#define AR_PHY_CCA_MAX_HIGH_VALUE -62 -#define AR_PHY_CCA_MIN_BAD_VALUE -121 - -#define AR_PHY_SYNTH_CONTROL 0x9874 -#define AR9280_PHY_CURRENT_RSSI 0x9c3c - -#define AR9280_PHY_CURRENT_RSSI 0x9c3c - -#define AR_PHY_XPA_CFG 0xA3D8 -#define AR_PHY_FORCE_XPA_CFG 0x000000001 -#define AR_PHY_FORCE_XPA_CFG_S 0 - -#define AR9280_PHY_CH1_MINCCA_PWR 0x1FF00000 -#define AR9280_PHY_CH1_MINCCA_PWR_S 20 - -#define AR9280_PHY_CH1_EXT_MINCCA_PWR 0x01FF0000 -#define AR9280_PHY_CH1_EXT_MINCCA_PWR_S 16 - -#endif - - - -#endif /* _DEV_ATH_AR5416PHY_H_ */ -- 2.25.1