From 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Thu, 16 Aug 2007 15:16:02 +0200 Subject: [PATCH] PPC4xx:HCU4/5 cleanup ecc/sdram init Make ecc initialisation robust, as DDR2-ECC errors may be generated while zeroing the RAM. Return 16 bytes (a cacheline) less than the available memory, as the board and/or PPC440EPx might have problems accessing the last bytes. Signed-off-by: Niklaus Giger --- board/netstal/hcu5/sdram.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 40391958d2..5d457f7b21 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -36,7 +36,7 @@ #include #include -void sysLedSet(u32 value); +void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); @@ -138,7 +138,7 @@ static int wait_for_dlllock(void) void sdram_panic(const char *reason) { printf("\n%s: reason %s", __FUNCTION__, reason); - sysLedSet(0xff); + hcu_led_set(0xff); while (1) { } /* Never return */ @@ -197,6 +197,13 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes, mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + /* + * Clear possible errors + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + mtspr(mcsr, mfspr(mcsr)); + /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | @@ -244,7 +251,6 @@ long int initdram (int board_type) sdram_panic(INVALID_HW_CONFIG); break; } - dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); /* * TCPD=200 cycles of clock input is required to lock the DLL. @@ -283,6 +289,7 @@ long int initdram (int board_type) /* * Program tlb entries for this size (dynamic) */ + remove_tlb(CFG_SDRAM_BASE, 256 << 20); program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /* @@ -291,6 +298,8 @@ long int initdram (int board_type) */ program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0); + /* Diminish RAM to initialize */ + dram_size = dram_size - 32 ; #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. -- 2.25.1