From 1dbc40e7d2c87f40addbfd6b7a2f119493133d22 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 14 Sep 2016 10:43:33 +0530 Subject: [PATCH] ARM: OMAP5+: Override switch_to_hypervisor function Override the switch_to_hypervisor function to switch cpu to hypervisor mode using the available ROM code hook early in the boot phase before the boot loader checks for HYP mode. Based on the work done by Jonathan Bergsagel jbergsagel@ti.com. Cc: beagleboard-x15@googlegroups.com Signed-off-by: Keerthy Reviewed-by: Tom Rini --- .../arm/cpu/armv7/omap-common/lowlevel_init.S | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 66a3b3d26c..8ce12c8e9a 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -24,6 +24,30 @@ ENTRY(save_boot_params) str r0, [r1] b save_boot_params_ret ENDPROC(save_boot_params) + +#if !defined(CONFIG_TI_SECURE_DEVICE) && defined(CONFIG_ARMV7_LPAE) +ENTRY(switch_to_hypervisor) + +/* + * Switch to hypervisor mode + */ + adr r0, save_sp + str sp, [r0] + adr r1, restore_from_hyp + ldr r0, =0x102 + b omap_smc1 +restore_from_hyp: + adr r0, save_sp + ldr sp, [r0] + MRC p15, 4, R0, c1, c0, 0 + ldr r1, =0X1004 @Set cache enable bits for hypervisor mode + orr r0, r0, r1 + MCR p15, 4, R0, c1, c0, 0 + b switch_to_hypervisor_ret +save_sp: + .word 0x0 +ENDPROC(switch_to_hypervisor) +#endif #endif ENTRY(omap_smc1) -- 2.25.1