From 1d06dc6d16a94611d916bef79deeaf73a726487b Mon Sep 17 00:00:00 2001 From: Robert Beckett Date: Fri, 31 Jan 2020 15:07:56 +0200 Subject: [PATCH] board: ge: mx53ppd: add i2c eeprom bootcount storage Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett --- arch/arm/dts/imx53-ppd-uboot.dtsi | 7 ++++++- configs/mx53ppd_defconfig | 6 +++--- include/configs/mx53ppd.h | 4 +--- 3 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/imx53-ppd-uboot.dtsi b/arch/arm/dts/imx53-ppd-uboot.dtsi index 8e45ee7679..0f81947812 100644 --- a/arch/arm/dts/imx53-ppd-uboot.dtsi +++ b/arch/arm/dts/imx53-ppd-uboot.dtsi @@ -9,6 +9,11 @@ compatible = "wdt-reboot"; wdt = <&wdog1>; }; + + bootcount { + compatible = "u-boot,bootcount-i2c-eeprom"; + i2c-eeprom = <&bootcount>; + }; }; &eeprom { @@ -20,7 +25,7 @@ size = <1022>; }; - bootcount { + bootcount: bootcount { offset = <1022>; size = <2>; }; diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 55889ee127..b5f00cf536 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -5,7 +5,6 @@ CONFIG_TARGET_MX53PPD=y CONFIG_ENV_SIZE=0x2800 CONFIG_ENV_OFFSET=0xC0000 CONFIG_BOOTCOUNT_BOOTLIMIT=10 -CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_NR_DRAM_BANKS=2 CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y @@ -23,6 +22,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y @@ -36,8 +36,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_EXT=y -CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5" +CONFIG_DM_BOOTCOUNT=y +CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index a11b085db8..e7eca82798 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -98,9 +98,7 @@ "setenv stdout vga; " \ "echo \"\n\n\n\n \" $msg; " \ "setenv stdout serial; " \ - "mw.b 0x7000A000 0xbc; " \ - "mw.b 0x7000A001 0x00; " \ - "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "bootcount reset; \0" \ "altbootcmd=" \ "run doquiet; " \ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ -- 2.25.1