From 1cd46ed2d30a931a66400635f158b14861f2d3b4 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Thu, 21 Nov 2013 13:39:00 -0800 Subject: [PATCH] net: zynq_gem: Move RCLK details out of driver The GEM driver should not need to know about Zynq specific details of RCLK related registers and bitfields in the SLCR. Move those details to the slcr driver. Signed-off-by: Soren Brinkmann Signed-off-by: Michal Simek --- arch/arm/cpu/armv7/zynq/slcr.c | 6 +++--- arch/arm/include/asm/arch-zynq/sys_proto.h | 2 +- drivers/net/zynq_gem.c | 7 ++----- 3 files changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index b4c11c324c..6710d92c34 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -50,7 +50,7 @@ void zynq_slcr_cpu_reset(void) } /* Setup clk for network */ -void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) +void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk) { zynq_slcr_unlock(); @@ -63,12 +63,12 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ writel(clk, &slcr_base->gem1_clk_ctrl); /* Configure GEM_RCLK_CTRL */ - writel(rclk, &slcr_base->gem1_rclk_ctrl); + writel(1, &slcr_base->gem1_rclk_ctrl); } else { /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ writel(clk, &slcr_base->gem0_clk_ctrl); /* Configure GEM_RCLK_CTRL */ - writel(rclk, &slcr_base->gem0_rclk_ctrl); + writel(1, &slcr_base->gem0_rclk_ctrl); } udelay(100000); out: diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 8f925af8a4..a485d790a3 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -10,7 +10,7 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); -extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); +extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_boot_mode(void); diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 381bca459e..2eb9e7d1ef 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -270,7 +270,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { - u32 i, rclk, clk = 0; + u32 i, clk = 0; struct phy_device *phydev; const u32 stat_size = (sizeof(struct zynq_gem_regs) - offsetof(struct zynq_gem_regs, stat)) / 4; @@ -348,17 +348,14 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) case SPEED_1000: writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000, ®s->nwcfg); - rclk = (0 << 4) | (1 << 0); clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0); break; case SPEED_100: clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000, ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100); - rclk = 1 << 0; clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); break; case SPEED_10: - rclk = 1 << 0; /* FIXME untested */ clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); break; @@ -367,7 +364,7 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) /* Change the rclk and clk only not using EMIO interface */ if (!priv->emio) zynq_slcr_gem_clk_setup(dev->iobase != - ZYNQ_GEM_BASEADDR0, rclk, clk); + ZYNQ_GEM_BASEADDR0, clk); setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); -- 2.25.1