From 1c87dd76c490041fce01e3dbfe29d993eadd693b Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:34 -0600 Subject: [PATCH] arm: Remove xaeniax board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- arch/arm/Kconfig | 5 - board/xaeniax/Kconfig | 9 - board/xaeniax/MAINTAINERS | 6 - board/xaeniax/Makefile | 8 - board/xaeniax/flash.c | 412 ----------------------------- board/xaeniax/xaeniax.c | 69 ----- configs/xaeniax_defconfig | 3 - drivers/net/smc91111.c | 51 +--- drivers/net/smc91111.h | 22 -- include/configs/xaeniax.h | 539 -------------------------------------- 10 files changed, 1 insertion(+), 1123 deletions(-) delete mode 100644 board/xaeniax/Kconfig delete mode 100644 board/xaeniax/MAINTAINERS delete mode 100644 board/xaeniax/Makefile delete mode 100644 board/xaeniax/flash.c delete mode 100644 board/xaeniax/xaeniax.c delete mode 100644 configs/xaeniax_defconfig delete mode 100644 include/configs/xaeniax.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4065001d76..89fe420c4d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -619,10 +619,6 @@ config TARGET_PALMTREO680 select CPU_PXA select SUPPORT_SPL -config TARGET_XAENIAX - bool "Support xaeniax" - select CPU_PXA - config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA @@ -783,7 +779,6 @@ source "board/technologic/ts4800/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" -source "board/xaeniax/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/board/xaeniax/Kconfig b/board/xaeniax/Kconfig deleted file mode 100644 index 519e21fb9a..0000000000 --- a/board/xaeniax/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_XAENIAX - -config SYS_BOARD - default "xaeniax" - -config SYS_CONFIG_NAME - default "xaeniax" - -endif diff --git a/board/xaeniax/MAINTAINERS b/board/xaeniax/MAINTAINERS deleted file mode 100644 index 44bb5883f2..0000000000 --- a/board/xaeniax/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XAENIAX BOARD -#M: - -S: Maintained -F: board/xaeniax/ -F: include/configs/xaeniax.h -F: configs/xaeniax_defconfig diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile deleted file mode 100644 index e5f116debb..0000000000 --- a/board/xaeniax/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := xaeniax.o flash.o diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c deleted file mode 100644 index 6ad62166a9..0000000000 --- a/board/xaeniax/flash.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH32 -#undef FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0] ); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x02000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = 0x00500050; /* clear status register cmd. */ - *addr = 0x00FF00FF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c deleted file mode 100644 index 995c262b6c..0000000000 --- a/board/xaeniax/xaeniax.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2004 - * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of xaeniax */ - gd->bd->bi_arch_number = 585; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/configs/xaeniax_defconfig b/configs/xaeniax_defconfig deleted file mode 100644 index 8634cc7b60..0000000000 --- a/configs/xaeniax_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_XAENIAX=y -# CONFIG_CMD_SETEXPR is not set diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index ade14cd475..f31216ffa6 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -499,15 +499,8 @@ again: } /* we have a packet address, so tell the card to use it */ -#ifndef CONFIG_XAENIAX SMC_outb (dev, packet_no, PN_REG); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl (dev, packet_no << 16, 0); -#endif + /* do not write new ptr value if Write data fifo not empty */ while ( saved_ptr & PTR_NOTEMPTY ) printf ("Write data fifo not empty!\n"); @@ -542,39 +535,19 @@ again: */ #ifdef USE_32_BIT SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2); -#ifndef CONFIG_XAENIAX if (length & 0x2) SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG); -#else - /* On XANEIAX, we can only use 32-bit writes, so we need to handle - * unaligned tail part specially. The standard code doesn't work. - */ - if ((length & 3) == 3) { - u16 * ptr = (u16*) &buf[length-3]; - SMC_outl(dev, (*ptr) | ((0x2000 | buf[length-1]) << 16), - SMC91111_DATA_REG); - } else if ((length & 2) == 2) { - u16 * ptr = (u16*) &buf[length-2]; - SMC_outl(dev, *ptr, SMC91111_DATA_REG); - } else if (length & 1) { - SMC_outl(dev, (0x2000 | buf[length-1]), SMC91111_DATA_REG); - } else { - SMC_outl(dev, 0, SMC91111_DATA_REG); - } -#endif #else SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */ -#ifndef CONFIG_XAENIAX /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (dev, 0, SMC91111_DATA_REG); } else { SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG); } -#endif /* and let the chipset deal with it */ SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG); @@ -588,9 +561,6 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX - SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); -#endif /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { @@ -610,9 +580,6 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX - SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); -#endif /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { @@ -625,15 +592,7 @@ again: } /* restore previously saved registers */ -#ifndef CONFIG_XAENIAX SMC_outb( dev, saved_pnr, PN_REG ); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl(dev, saved_pnr << 16, 0); -#endif SMC_outw( dev, saved_ptr, PTR_REG ); return length; @@ -802,15 +761,7 @@ static int smc_rcv(struct eth_device *dev) udelay(1); /* Wait until not busy */ /* restore saved registers */ -#ifndef CONFIG_XAENIAX SMC_outb( dev, saved_pnr, PN_REG ); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl( dev, saved_pnr << 16, 0); -#endif SMC_outw( dev, saved_ptr, PTR_REG ); if (!is_error) { diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index e19c491cbc..5197f36039 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -77,19 +77,6 @@ struct smc91111_priv{ if (__p & 2) __v >>= 8; \ else __v &= 0xff; \ __v; }) -#elif defined(CONFIG_XAENIAX) -#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) -#define SMC_inw(a,z) ({ \ - unsigned int __p = (unsigned int)((a)->iobase + (z)); \ - unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \ - if (__p & 3) __v >>= 16; \ - else __v &= 0xffff; \ - __v; }) -#define SMC_inb(a,p) ({ \ - unsigned int ___v = SMC_inw((a),(p) & ~1); \ - if ((p) & 1) ___v >>= 8; \ - else ___v &= 0xff; \ - ___v; }) #else #define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) #define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r)))) @@ -104,15 +91,6 @@ struct smc91111_priv{ #ifdef CONFIG_XSENGINE #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d) #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d) -#elif defined (CONFIG_XAENIAX) -#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) -#define SMC_outw(a,d,p) ({ \ - dword __dwo = SMC_inl((a),(p) & ~3); \ - dword __dwn = (word)(d); \ - __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \ - __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \ - SMC_outl((a), __dwo, (p) & ~3); \ -}) #else #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d) diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h deleted file mode 100644 index 8d19bffa02..0000000000 --- a/include/configs/xaeniax.h +++ /dev/null @@ -1,539 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Wolfgang Denk, DENX Software Engineering, - * - * (C) Copyright 2004 - * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Configuation settings for the xaeniax board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */ -#define CONFIG_XAENIAX 1 /* on a xaeniax board */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -#define CONFIG_BOARD_LATE_INIT - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */ -#define CONFIG_CONS_INDEX 4 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_DTT - - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.68.201 -#define CONFIG_SERVERIP 192.168.68.62 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "bootm 0x00100000" -#define CONFIG_BOOTARGS "console=ttyS1,115200" -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "u-boot$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "u-boot=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* FIXME */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ - -/* - * SMSC91C111 Network Card - */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */ -#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * GPIO settings - */ - -/* - * GP05 == nUSBReset is 1 - * GP10 == CFReset is 1 - * GP13 == nCFDataEnable is 1 - * GP14 == nCFAddrEnable is 1 - * GP15 == nCS1 is 1 - * GP21 == ComBrdReset is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP31 == SYNC is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP43 == BTTXD is 1 - * GP45 == BTRTS is 1 - * GP47 == TXD is 1 - * GP48 == nPOE is 1 - * GP49 == nPWE is 1 - * GP50 == nPIOR is 1 - * GP51 == nPIOW is 1 - * GP52 == nPCE[1] is 1 - * GP53 == nPCE[2] is 1 - * GP54 == nPSKTSEL is 1 - * GP55 == nPREG is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - * GP82 == NSSPSFRM is 1 - * GP83 == NSSPTXD is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x8320E420 -#define CONFIG_SYS_GPSR1_VAL 0x00FFAA82 -#define CONFIG_SYS_GPSR2_VAL 0x000DC000 - -/* - * GP03 == LANReset is 0 - * GP06 == USBWakeUp is 0 - * GP11 == USBControl is 0 - * GP12 == Buzzer is 0 - * GP16 == PWM0 is 0 - * GP17 == PWM1 is 0 - * GP23 == SCLK is 0 - * GP30 == SDATA_OUT is 0 - * GP81 == NSSPCLK is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x40C31848 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00020000 - -/* - * GP00 == CPUWakeUpUSB is input - * GP01 == GP reset is input - * GP02 == LANInterrupt is input - * GP03 == LANReset is output - * GP04 == USBInterrupt is input - * GP05 == nUSBReset is output - * GP06 == USBWakeUp is output - * GP07 == CFReady/nBusy is input - * GP08 == nCFCardDetect1 is input - * GP09 == nCFCardDetect2 is input - * GP10 == nCFReset is output - * GP11 == USBControl is output - * GP12 == Buzzer is output - * GP13 == CFDataEnable is output - * GP14 == CFAddressEnable is output - * GP15 == nCS1 is output - * GP16 == PWM0 is output - * GP17 == PWM1 is output - * GP18 == RDY is input - * GP19 == ReaderReady is input - * GP20 == ReaderReset is input - * GP21 == ComBrdReset is output - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP27 == EXTCLK is input - * GP28 == BITCLK is output - * GP29 == SDATA_IN0 is input - * GP30 == SDATA_OUT is output - * GP31 == SYNC is output - * GP32 == SYSSCLK is output - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP36 == DCD is input - * GP37 == DSR is input - * GP38 == RI is input - * GP39 == FFTXD is output - * GP40 == DTR is output - * GP41 == RTS is output - * GP42 == BTRXD is input - * GP43 == BTTXD is output - * GP44 == BTCTS is input - * GP45 == BTRTS is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP48 == nPOE is output - * GP49 == nPWE is output - * GP50 == nPIOR is output - * GP51 == nPIOW is output - * GP52 == nPCE[1] is output - * GP53 == nPCE[2] is output - * GP54 == nPSKTSEL is output - * GP55 == nPREG is output - * GP56 == nPWAIT is input - * GP57 == nPIOS16 is input - * GP58 == LDD[0] is output - * GP59 == LDD[1] is output - * GP60 == LDD[2] is output - * GP61 == LDD[3] is output - * GP62 == LDD[4] is output - * GP63 == LDD[5] is output - * GP64 == LDD[6] is output - * GP65 == LDD[7] is output - * GP66 == LDD[8] is output - * GP67 == LDD[9] is output - * GP68 == LDD[10] is output - * GP69 == LDD[11] is output - * GP70 == LDD[12] is output - * GP71 == LDD[13] is output - * GP72 == LDD[14] is output - * GP73 == LDD[15] is output - * GP74 == LCD_FCLK is output - * GP75 == LCD_LCLK is output - * GP76 == LCD_PCLK is output - * GP77 == LCD_ACBIAS is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - * GP81 == NSSPCLK is output - * GP82 == NSSPSFRM is output - * GP83 == NSSPTXD is output - * GP84 == NSSPRXD is input - */ -#define CONFIG_SYS_GPDR0_VAL 0xD3E3FC68 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB83 -#define CONFIG_SYS_GPDR2_VAL 0x000FFFFF - -/* - * GP01 == GP reset is AF01 - * GP15 == nCS1 is AF10 - * GP16 == PWM0 is AF10 - * GP17 == PWM1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP27 == EXTCLK is AF01 - * GP28 == BITCLK is AF01 - * GP29 == SDATA_IN0 is AF10 - * GP30 == SDATA_OUT is AF01 - * GP31 == SYNC is AF01 - * GP32 == SYSCLK is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP36 == DCD is AF01 - * GP37 == DSR is AF01 - * GP38 == RI is AF01 - * GP39 == FFTXD is AF10 - * GP40 == DTR is AF10 - * GP41 == RTS is AF10 - * GP42 == BTRXD is AF01 - * GP43 == BTTXD is AF10 - * GP44 == BTCTS is AF01 - * GP45 == BTRTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP48 == nPOE is AF10 - * GP49 == nPWE is AF10 - * GP50 == nPIOR is AF10 - * GP51 == nPIOW is AF10 - * GP52 == nPCE[1] is AF10 - * GP53 == nPCE[2] is AF10 - * GP54 == nPSKTSEL is AF10 - * GP55 == nPREG is AF10 - * GP56 == nPWAIT is AF01 - * GP57 == nPIOS16 is AF01 - * GP58 == LDD[0] is AF10 - * GP59 == LDD[1] is AF10 - * GP60 == LDD[2] is AF10 - * GP61 == LDD[3] is AF10 - * GP62 == LDD[4] is AF10 - * GP63 == LDD[5] is AF10 - * GP64 == LDD[6] is AF10 - * GP65 == LDD[7] is AF10 - * GP66 == LDD[8] is AF10 - * GP67 == LDD[9] is AF10 - * GP68 == LDD[10] is AF10 - * GP69 == LDD[11] is AF10 - * GP70 == LDD[12] is AF10 - * GP71 == LDD[13] is AF10 - * GP72 == LDD[14] is AF10 - * GP73 == LDD[15] is AF10 - * GP74 == LCD_FCLK is AF10 - * GP75 == LCD_LCLK is AF10 - * GP76 == LCD_PCLK is AF10 - * GP77 == LCD_ACBIAS is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - * GP81 == NSSPCLK is AF01 - * GP82 == NSSPSFRM is AF01 - * GP83 == NSSPTXD is AF01 - * GP84 == NSSPRXD is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000004 -#define CONFIG_SYS_GAFR0_U_VAL 0x595A801A -#define CONFIG_SYS_GAFR1_L_VAL 0x699A9559 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x00000256 - -/* - * clock settings - */ -/* RDH = 1 - * PH = 0 - * VFS = 0 - * BFS = 0 - * SSS = 0 - */ -#define CONFIG_SYS_PSSR_VAL 0x00000030 - -#define CONFIG_SYS_CKEN 0x00000080 /* */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 - - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1 : - * [31] 0 - - * [30:28] 000 - - * [27:24] 0000 - - * [23:20] 0000 - - * [19] 0 - - * [18:16] 000 - - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns - * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?) - * [03] 0 - 32 Bit bus width - * [02:00] 010 - burst OF 4 ROM or FLASH -*/ -#define CONFIG_SYS_MSC0_VAL 0x000023D2 - -/* This is the configuration for nCS2/3 -> USB controller, LAN - * configuration for nCS3: LAN - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns - * [19] 0 - 32 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: USB - * [15] 1 - Faster Device - * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x1224A26C - -/* This is the configuration for nCS4/5 -> LAN - * configuration for nCS5: - * [31] 0 - - * [30:28] 000 - - * [27:24] 0000 - - * [23:20] 0000 - - * [19] 0 - - * [18:16] 000 - - * configuration for nCS4: LAN - * [15] 1 - Faster Device - * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns - * [03] 0 - 32 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x00001224 - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 0 - no SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x00000AC9 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 0 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 1 - APD: auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 0 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 0 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */ - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00320032 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - - -#endif /* __CONFIG_H */ -- 2.25.1