From 1b8ad74a6f8cea55a727dc4b399baac46d0daef1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 25 Aug 2014 14:26:45 -0300 Subject: [PATCH] pcie_imx: Add mx6solox support Let PCI on mx6solox also be supported. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut --- arch/arm/cpu/armv7/mx6/clock.c | 17 +++++++++--- arch/arm/include/asm/arch-mx6/iomux.h | 9 ++++++ drivers/pci/pcie_imx.c | 40 ++++++++++++++++++++++++--- 3 files changed, 58 insertions(+), 8 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a861e655ea..52136f7a22 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -599,6 +599,7 @@ int enable_pcie_clock(void) struct anatop_regs *anatop_regs = (struct anatop_regs *)ANATOP_BASE_ADDR; struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + u32 lvds1_clk_sel; /* * Here be dragons! @@ -608,17 +609,25 @@ int enable_pcie_clock(void) * marked as ANATOP_MISC1 is actually documented in the PMU section * of the datasheet as PMU_MISC1. * - * Switch LVDS clock source to SATA (0xb), disable clock INPUT and - * enable clock OUTPUT. This is important for PCI express link that - * is clocked from the i.MX6. + * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on + * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important + * for PCI express link that is clocked from the i.MX6. */ #define ANADIG_ANA_MISC1_LVDSCLK1_IBEN (1 << 12) #define ANADIG_ANA_MISC1_LVDSCLK1_OBEN (1 << 10) #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK 0x0000001F +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa +#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb + + if (is_cpu_type(MXC_CPU_MX6SX)) + lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF; + else + lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF; + clrsetbits_le32(&anatop_regs->ana_misc1, ANADIG_ANA_MISC1_LVDSCLK1_IBEN | ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK, - ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb); + ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel); /* PCIe reference clock sourced from AXI. */ clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL); diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index f54db6944d..9b3a91f076 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -18,6 +18,12 @@ #define IOMUXC_GPR1_REF_SSP_EN (1 << 16) #define IOMUXC_GPR1_TEST_POWERDOWN (1 << 18) +/* + * IOMUXC_GPR5 bit fields + */ +#define IOMUXC_GPR5_PCIE_BTNRST (1 << 19) +#define IOMUXC_GPR5_PCIE_PERST (1 << 18) + /* * IOMUXC_GPR8 bit fields */ @@ -35,12 +41,15 @@ /* * IOMUXC_GPR12 bit fields */ +#define IOMUXC_GPR12_RX_EQ_2 (0x2 << 0) +#define IOMUXC_GPR12_RX_EQ_MASK (0x7 << 0) #define IOMUXC_GPR12_LOS_LEVEL_9 (0x9 << 4) #define IOMUXC_GPR12_LOS_LEVEL_MASK (0x1f << 4) #define IOMUXC_GPR12_APPS_LTSSM_ENABLE (1 << 10) #define IOMUXC_GPR12_DEVICE_TYPE_EP (0x0 << 12) #define IOMUXC_GPR12_DEVICE_TYPE_RC (0x4 << 12) #define IOMUXC_GPR12_DEVICE_TYPE_MASK (0xf << 12) +#define IOMUXC_GPR12_TEST_POWERDOWN (1 << 30) /* * IOMUXC_GPR13 bit fields diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index a3982c4553..fd7e4d499f 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -23,13 +23,20 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 +#ifdef CONFIG_MX6SX +#define MX6_DBI_ADDR 0x08ffc000 +#define MX6_IO_ADDR 0x08000000 +#define MX6_MEM_ADDR 0x08100000 +#define MX6_ROOT_ADDR 0x08f00000 +#else #define MX6_DBI_ADDR 0x01ffc000 -#define MX6_DBI_SIZE 0x4000 #define MX6_IO_ADDR 0x01000000 -#define MX6_IO_SIZE 0x100000 #define MX6_MEM_ADDR 0x01100000 -#define MX6_MEM_SIZE 0xe00000 #define MX6_ROOT_ADDR 0x01f00000 +#endif +#define MX6_DBI_SIZE 0x4000 +#define MX6_IO_SIZE 0x100000 +#define MX6_MEM_SIZE 0xe00000 #define MX6_ROOT_SIZE 0xfc000 /* PCIe Port Logic registers (memory-mapped) */ @@ -57,6 +64,8 @@ #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) +#define PCIE_PHY_PUP_REQ (1 << 7) + /* iATU registers */ #define PCIE_ATU_VIEWPORT 0x900 #define PCIE_ATU_REGION_INBOUND (0x1 << 31) @@ -421,9 +430,19 @@ static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d, static int imx6_pcie_assert_core_reset(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; - +#if defined(CONFIG_MX6SX) + struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR; + + /* SSP_EN is not used on MX6SX anymore */ + setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); + /* Force PCIe PHY reset */ + setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); + /* Power up PCIe PHY */ + setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ); +#else setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); +#endif return 0; } @@ -441,6 +460,12 @@ static int imx6_pcie_init_phy(void) IOMUXC_GPR12_LOS_LEVEL_MASK, IOMUXC_GPR12_LOS_LEVEL_9); +#ifdef CONFIG_MX6SX + clrsetbits_le32(&iomuxc_regs->gpr[12], + IOMUXC_GPR12_RX_EQ_MASK, + IOMUXC_GPR12_RX_EQ_2); +#endif + writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) | (0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) | (20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) | @@ -517,9 +542,16 @@ static int imx6_pcie_deassert_core_reset(void) */ mdelay(50); +#if defined(CONFIG_MX6SX) + /* SSP_EN is not used on MX6SX anymore */ + clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); + /* Clear PCIe PHY reset bit */ + clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); +#else /* Enable PCIe */ clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN); setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN); +#endif imx6_pcie_toggle_reset(); -- 2.25.1