From 1aa5a61754d4995d8144a48dde0565211da0d5a8 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 19 Dec 2011 23:33:03 +0000 Subject: [PATCH] kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing SVN-Revision: 29574 --- ...-parsing-of-EEPROM-into-own-function.patch | 278 --- ...lizing-of-struct-bcma_bus-to-own-fun.patch | 52 - ...nctions-to-scan-cores-needed-on-SoCs.patch | 321 --- .../patches-3.0/0004-bcma-add-SOC-bus.patch | 417 ---- .../0005-bcma-add-mips-driver.patch | 456 ---- ...0006-bcma-add-serial-console-support.patch | 166 -- .../patches-3.0/0007-bcma-get-CPU-clock.patch | 229 -- ...cma-move-parallel-flash-into-a-union.patch | 10 +- ...cma-add-serial-flash-support-to-bcma.patch | 14 +- ...-mac-address-as-long-as-reading-it-o.patch | 2 +- .../brcm47xx/patches-3.0/220-bcm5354.patch | 2 +- .../patches-3.0/230-ssb_pci_sprom.patch | 19 - .../patches-3.0/951-brcm4716-defines.patch | 4 +- .../patches-2.6.30/025-bcma_backport.patch | 1607 +++++++++++-- .../patches-2.6.30/941-ssb_update.patch | 426 +++- .../patches-2.6.31/025-bcma_backport.patch | 1607 +++++++++++-- .../patches-2.6.31/941-ssb_update.patch | 426 +++- .../patches-2.6.32/025-bcma_backport.patch | 1607 +++++++++++-- .../patches-2.6.32/975-ssb_update.patch | 441 +++- .../patches-2.6.36/025-bcma_backport.patch | 1607 +++++++++++-- .../patches-2.6.36/941-ssb_update.patch | 418 +++- .../patches-2.6.37/020-ssb_update.patch | 418 +++- .../patches-2.6.37/025-bcma_backport.patch | 1607 +++++++++++-- .../patches-2.6.38/020-ssb_update.patch | 972 +++++--- .../patches-2.6.38/025-bcma_backport.patch | 1609 +++++++++++-- .../patches-2.6.39/020-ssb_update.patch | 409 +++- .../patches-2.6.39/025-bcma_backport.patch | 1607 +++++++++++-- .../generic/patches-3.0/020-ssb_update.patch | 383 +++- .../patches-3.0/025-bcma_backport.patch | 2027 ++++++++++++++++- .../generic/patches-3.1/020-ssb_update.patch | 223 ++ .../patches-3.1/025-bcma_backport.patch | 2016 ++++++++++++++++ 31 files changed, 17430 insertions(+), 3950 deletions(-) delete mode 100644 target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch delete mode 100644 target/linux/brcm47xx/patches-3.0/230-ssb_pci_sprom.patch create mode 100644 target/linux/generic/patches-3.1/020-ssb_update.patch create mode 100644 target/linux/generic/patches-3.1/025-bcma_backport.patch diff --git a/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch b/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch deleted file mode 100644 index 740e96e81f..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0001-bcma-move-parsing-of-EEPROM-into-own-function.patch +++ /dev/null @@ -1,278 +0,0 @@ -From a1bf12e78294c6cd3d8747e1e07c48977ca1e3e3 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 11 Jun 2011 16:47:38 +0200 -Subject: [PATCH 01/26] bcma: move parsing of EEPROM into own function. -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move the parsing of the EEPROM data in scan function for one core into -an own function. Now we are able to use it in some other scan function -as well. - -Acked-by: Rafał Miłecki -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/scan.c | 230 ++++++++++++++++++++++++++------------------------- - 1 files changed, 118 insertions(+), 112 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -200,16 +200,124 @@ static s32 bcma_erom_get_addr_desc(struc - return addrl; - } - -+static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, -+ struct bcma_device *core) -+{ -+ s32 tmp; -+ u8 i, j; -+ s32 cia, cib; -+ u8 ports[2], wrappers[2]; -+ -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(eromptr); -+ if (bcma_erom_is_end(bus, eromptr)) -+ return -ESPIPE; -+ return -EILSEQ; -+ } -+ cib = bcma_erom_get_ci(bus, eromptr); -+ if (cib < 0) -+ return -EILSEQ; -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENXIO; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENXIO; -+ } -+ -+ if (bcma_erom_is_bridge(bus, eromptr)) { -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENXIO; -+ } -+ -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); -+ if (mst_port_d < 0) -+ return -EILSEQ; -+ } -+ -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } -+ -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } -+ -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } -+ return 0; -+} -+ - int bcma_bus_scan(struct bcma_bus *bus) - { - u32 erombase; - u32 __iomem *eromptr, *eromend; - -- s32 cia, cib; -- u8 ports[2], wrappers[2]; -- - s32 tmp; -- u8 i, j; - - int err; - -@@ -236,112 +344,13 @@ int bcma_bus_scan(struct bcma_bus *bus) - INIT_LIST_HEAD(&core->list); - core->bus = bus; - -- /* get CIs */ -- cia = bcma_erom_get_ci(bus, &eromptr); -- if (cia < 0) { -- bcma_erom_push_ent(&eromptr); -- if (bcma_erom_is_end(bus, &eromptr)) -- break; -- err= -EILSEQ; -- goto out; -- } -- cib = bcma_erom_get_ci(bus, &eromptr); -- if (cib < 0) { -- err= -EILSEQ; -- goto out; -- } -- -- /* parse CIs */ -- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -- -- if (((core->id.manuf == BCMA_MANUF_ARM) && -- (core->id.id == 0xFFF)) || -- (ports[1] == 0)) { -- bcma_erom_skip_component(bus, &eromptr); -+ err = bcma_get_next_core(bus, &eromptr, core); -+ if (err == -ENXIO) - continue; -- } -- -- /* check if component is a core at all */ -- if (wrappers[0] + wrappers[1] == 0) { -- /* we could save addrl of the router -- if (cid == BCMA_CORE_OOB_ROUTER) -- */ -- bcma_erom_skip_component(bus, &eromptr); -- continue; -- } -- -- if (bcma_erom_is_bridge(bus, &eromptr)) { -- bcma_erom_skip_component(bus, &eromptr); -- continue; -- } -- -- /* get & parse master ports */ -- for (i = 0; i < ports[0]; i++) { -- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -- if (mst_port_d < 0) { -- err= -EILSEQ; -- goto out; -- } -- } -- -- /* get & parse slave ports */ -- for (i = 0; i < ports[1]; i++) { -- for (j = 0; ; j++) { -- tmp = bcma_erom_get_addr_desc(bus, &eromptr, -- SCAN_ADDR_TYPE_SLAVE, i); -- if (tmp < 0) { -- /* no more entries for port _i_ */ -- /* pr_debug("erom: slave port %d " -- * "has %d descriptors\n", i, j); */ -- break; -- } else { -- if (i == 0 && j == 0) -- core->addr = tmp; -- } -- } -- } -- -- /* get & parse master wrappers */ -- for (i = 0; i < wrappers[0]; i++) { -- for (j = 0; ; j++) { -- tmp = bcma_erom_get_addr_desc(bus, &eromptr, -- SCAN_ADDR_TYPE_MWRAP, i); -- if (tmp < 0) { -- /* no more entries for port _i_ */ -- /* pr_debug("erom: master wrapper %d " -- * "has %d descriptors\n", i, j); */ -- break; -- } else { -- if (i == 0 && j == 0) -- core->wrap = tmp; -- } -- } -- } -- -- /* get & parse slave wrappers */ -- for (i = 0; i < wrappers[1]; i++) { -- u8 hack = (ports[1] == 1) ? 0 : 1; -- for (j = 0; ; j++) { -- tmp = bcma_erom_get_addr_desc(bus, &eromptr, -- SCAN_ADDR_TYPE_SWRAP, i + hack); -- if (tmp < 0) { -- /* no more entries for port _i_ */ -- /* pr_debug("erom: master wrapper %d " -- * has %d descriptors\n", i, j); */ -- break; -- } else { -- if (wrappers[0] == 0 && !i && !j) -- core->wrap = tmp; -- } -- } -- } -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) -+ return err; - - pr_info("Core %d found: %s " - "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -@@ -351,9 +360,6 @@ int bcma_bus_scan(struct bcma_bus *bus) - - core->core_index = bus->nr_cores++; - list_add(&core->list, &bus->cores); -- continue; --out: -- return err; - } - - return 0; diff --git a/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch b/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch deleted file mode 100644 index 48191abc3e..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0002-bcma-move-initializing-of-struct-bcma_bus-to-own-fun.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 30ef571a04dc19171c6b6664d88b60c39161eb42 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 18 Jun 2011 11:55:47 +0200 -Subject: [PATCH 02/26] bcma: move initializing of struct bcma_bus to own function. -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This makes it possible to use this code in some other method. - -Acked-by: Rafał Miłecki -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/scan.c | 17 +++++++++++------ - 1 files changed, 11 insertions(+), 6 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -312,15 +312,10 @@ static int bcma_get_next_core(struct bcm - return 0; - } - --int bcma_bus_scan(struct bcma_bus *bus) -+static void bcma_init_bus(struct bcma_bus *bus) - { -- u32 erombase; -- u32 __iomem *eromptr, *eromend; -- - s32 tmp; - -- int err; -- - INIT_LIST_HEAD(&bus->cores); - bus->nr_cores = 0; - -@@ -330,6 +325,16 @@ int bcma_bus_scan(struct bcma_bus *bus) - bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; - bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; - bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+} -+ -+int bcma_bus_scan(struct bcma_bus *bus) -+{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; -+ -+ int err; -+ -+ bcma_init_bus(bus); - - erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); - eromptr = bus->mmio; diff --git a/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch deleted file mode 100644 index 92cd65d396..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0003-bcma-add-functions-to-scan-cores-needed-on-SoCs.patch +++ /dev/null @@ -1,321 +0,0 @@ -From f3c07dd351161cb33f1c8e1ff55a65ae0cc6b661 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 18 Jun 2011 14:30:55 +0200 -Subject: [PATCH 03/26] bcma: add functions to scan cores needed on SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The chip common and mips core have to be setup early in the boot -process to get the cpu clock. -bcma_bus_early_register() gets pointers to some space to store the core -data and searches for the chip common and mips core and initializes -chip common. After that was done and the kernel is out of early boot we -just have to run bcma_bus_register() and it will search for the other -cores, initialize and register them. -The cores are getting the same numbers as before. - -Acked-by: Rafał Miłecki -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/bcma_private.h | 7 ++ - drivers/bcma/driver_chipcommon.c | 5 ++ - drivers/bcma/driver_pci.c | 5 ++ - drivers/bcma/main.c | 46 +++++++++++++ - drivers/bcma/scan.c | 95 +++++++++++++++++++++++++-- - include/linux/bcma/bcma.h | 1 + - include/linux/bcma/bcma_driver_chipcommon.h | 1 + - 7 files changed, 154 insertions(+), 6 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -15,9 +15,16 @@ struct bcma_bus; - /* main.c */ - int bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); -+int __init bcma_bus_early_register(struct bcma_bus *bus, -+ struct bcma_device *core_cc, -+ struct bcma_device *core_mips); - - /* scan.c */ - int bcma_bus_scan(struct bcma_bus *bus); -+int __init bcma_bus_scan_early(struct bcma_bus *bus, -+ struct bcma_device_id *match, -+ struct bcma_device *core); -+void bcma_init_bus(struct bcma_bus *bus); - - /* sprom.c */ - int bcma_sprom_get(struct bcma_bus *bus); ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -26,6 +26,9 @@ void bcma_core_chipcommon_init(struct bc - u32 leddc_on = 10; - u32 leddc_off = 90; - -+ if (cc->setup_done) -+ return; -+ - if (cc->core->id.rev >= 11) - cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); - cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); -@@ -52,6 +55,8 @@ void bcma_core_chipcommon_init(struct bc - ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | - (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); - } -+ -+ cc->setup_done = true; - } - - /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -187,6 +187,9 @@ static bool bcma_core_pci_is_in_hostmode - - void bcma_core_pci_init(struct bcma_drv_pci *pc) - { -+ if (pc->setup_done) -+ return; -+ - if (bcma_core_pci_is_in_hostmode(pc)) { - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - bcma_core_pci_hostmode_init(pc); -@@ -196,6 +199,8 @@ void bcma_core_pci_init(struct bcma_drv_ - } else { - bcma_core_pci_clientmode_init(pc); - } -+ -+ pc->setup_done = true; - } - - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -169,6 +169,52 @@ void bcma_bus_unregister(struct bcma_bus - bcma_unregister_cores(bus); - } - -+int __init bcma_bus_early_register(struct bcma_bus *bus, -+ struct bcma_device *core_cc, -+ struct bcma_device *core_mips) -+{ -+ int err; -+ struct bcma_device *core; -+ struct bcma_device_id match; -+ -+ bcma_init_bus(bus); -+ -+ match.manuf = BCMA_MANUF_BCM; -+ match.id = BCMA_CORE_CHIPCOMMON; -+ match.class = BCMA_CL_SIM; -+ match.rev = BCMA_ANY_REV; -+ -+ /* Scan for chip common core */ -+ err = bcma_bus_scan_early(bus, &match, core_cc); -+ if (err) { -+ pr_err("Failed to scan for common core: %d\n", err); -+ return -1; -+ } -+ -+ match.manuf = BCMA_MANUF_MIPS; -+ match.id = BCMA_CORE_MIPS_74K; -+ match.class = BCMA_CL_SIM; -+ match.rev = BCMA_ANY_REV; -+ -+ /* Scan for mips core */ -+ err = bcma_bus_scan_early(bus, &match, core_mips); -+ if (err) { -+ pr_err("Failed to scan for mips core: %d\n", err); -+ return -1; -+ } -+ -+ /* Init CC core */ -+ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); -+ if (core) { -+ bus->drv_cc.core = core; -+ bcma_core_chipcommon_init(&bus->drv_cc); -+ } -+ -+ pr_info("Early bus registered\n"); -+ -+ return 0; -+} -+ - int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) - { - drv->drv.name = drv->name; ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -200,7 +200,20 @@ static s32 bcma_erom_get_addr_desc(struc - return addrl; - } - -+static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, -+ u16 index) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry(core, &bus->cores, list) { -+ if (core->core_index == index) -+ return core; -+ } -+ return NULL; -+} -+ - static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, -+ struct bcma_device_id *match, int core_num, - struct bcma_device *core) - { - s32 tmp; -@@ -251,6 +264,21 @@ static int bcma_get_next_core(struct bcm - return -ENXIO; - } - -+ if (bcma_find_core_by_index(bus, core_num)) { -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENODEV; -+ } -+ -+ if (match && ((match->manuf != BCMA_ANY_MANUF && -+ match->manuf != core->id.manuf) || -+ (match->id != BCMA_ANY_ID && match->id != core->id.id) || -+ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || -+ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) -+ )) { -+ bcma_erom_skip_component(bus, eromptr); -+ return -ENODEV; -+ } -+ - /* get & parse master ports */ - for (i = 0; i < ports[0]; i++) { - u32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); -@@ -312,10 +340,13 @@ static int bcma_get_next_core(struct bcm - return 0; - } - --static void bcma_init_bus(struct bcma_bus *bus) -+void bcma_init_bus(struct bcma_bus *bus) - { - s32 tmp; - -+ if (bus->init_done) -+ return; -+ - INIT_LIST_HEAD(&bus->cores); - bus->nr_cores = 0; - -@@ -325,6 +356,7 @@ static void bcma_init_bus(struct bcma_bu - bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; - bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; - bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ bus->init_done = true; - } - - int bcma_bus_scan(struct bcma_bus *bus) -@@ -332,7 +364,7 @@ int bcma_bus_scan(struct bcma_bus *bus) - u32 erombase; - u32 __iomem *eromptr, *eromend; - -- int err; -+ int err, core_num = 0; - - bcma_init_bus(bus); - -@@ -349,23 +381,74 @@ int bcma_bus_scan(struct bcma_bus *bus) - INIT_LIST_HEAD(&core->list); - core->bus = bus; - -- err = bcma_get_next_core(bus, &eromptr, core); -- if (err == -ENXIO) -+ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) - continue; - else if (err == -ESPIPE) - break; - else if (err < 0) - return err; - -+ core->core_index = core_num++; -+ bus->nr_cores++; -+ - pr_info("Core %d found: %s " - "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -- bus->nr_cores, bcma_device_name(&core->id), -+ core->core_index, bcma_device_name(&core->id), - core->id.manuf, core->id.id, core->id.rev, - core->id.class); - -- core->core_index = bus->nr_cores++; - list_add(&core->list, &bus->cores); - } - - return 0; - } -+ -+int __init bcma_bus_scan_early(struct bcma_bus *bus, -+ struct bcma_device_id *match, -+ struct bcma_device *core) -+{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; -+ -+ int err, core_num = 0; -+ -+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; -+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); -+ -+ bcma_scan_switch_core(bus, erombase); -+ -+ while (eromptr < eromend) { -+ memset(core, 0, sizeof(*core)); -+ INIT_LIST_HEAD(&core->list); -+ core->bus = bus; -+ -+ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) -+ return err; -+ -+ core->core_index = core_num++; -+ bus->nr_cores++; -+ pr_info("Core %d found: %s " -+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ core->core_index, bcma_device_name(&core->id), -+ core->id.manuf, core->id.id, core->id.rev, -+ core->id.class); -+ -+ list_add(&core->list, &bus->cores); -+ return 0; -+ } -+ -+ return -ENODEV; -+} ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -190,6 +190,7 @@ struct bcma_bus { - struct bcma_device *mapped_core; - struct list_head cores; - u8 nr_cores; -+ u8 init_done:1; - - struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -252,6 +252,7 @@ struct bcma_drv_cc { - u32 status; - u32 capabilities; - u32 capabilities_ext; -+ u8 setup_done:1; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct bcma_chipcommon_pmu pmu; diff --git a/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch b/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch deleted file mode 100644 index 6ad9dce4b8..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0004-bcma-add-SOC-bus.patch +++ /dev/null @@ -1,417 +0,0 @@ -From d743a740b76a6be9e88fe1ae6991682927a7769c Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 18 Jun 2011 14:31:53 +0200 -Subject: [PATCH 04/26] bcma: add SOC bus -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch adds support for using bcma on a Broadcom SoC as the system -bus. An SoC like the bcm4716 could register this bus and use it to -searches for the bcma cores and register the devices on this bus. - -BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC -is a better name. - -Acked-by: Rafał Miłecki -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/Kconfig | 4 + - drivers/bcma/Makefile | 1 + - drivers/bcma/core.c | 2 + - drivers/bcma/driver_pci.c | 9 ++- - drivers/bcma/host_soc.c | 183 +++++++++++++++++++++++++++++++++++++++++ - drivers/bcma/main.c | 9 ++- - drivers/bcma/scan.c | 42 ++++++++- - include/linux/bcma/bcma.h | 5 +- - include/linux/bcma/bcma_soc.h | 16 ++++ - 9 files changed, 263 insertions(+), 8 deletions(-) - create mode 100644 drivers/bcma/host_soc.c - create mode 100644 include/linux/bcma/bcma_soc.h - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -34,6 +34,10 @@ config BCMA_DRIVER_PCI_HOSTMODE - help - PCI core hostmode operation (external PCI bus). - -+config BCMA_HOST_SOC -+ bool -+ depends on BCMA && MIPS -+ - config BCMA_DEBUG - bool "BCMA debugging" - depends on BCMA ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver - bcma-y += driver_pci.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o - bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o -+bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o - obj-$(CONFIG_BCMA) += bcma.o - - ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG ---- a/drivers/bcma/core.c -+++ b/drivers/bcma/core.c -@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); - u32 bcma_core_dma_translation(struct bcma_device *core) - { - switch (core->bus->hosttype) { -+ case BCMA_HOSTTYPE_SOC: -+ return 0; - case BCMA_HOSTTYPE_PCI: - if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) - return BCMA_DMA_TRANSLATION_DMA64_CMT; ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -208,7 +208,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr - { - struct pci_dev *pdev = pc->core->bus->host_pci; - u32 coremask, tmp; -- int err; -+ int err = 0; -+ -+ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { -+ /* This bcma device is not on a PCI host-bus. So the IRQs are -+ * not routed through the PCI core. -+ * So we must not enable routing through the PCI core. */ -+ goto out; -+ } - - err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); - if (err) ---- /dev/null -+++ b/drivers/bcma/host_soc.c -@@ -0,0 +1,183 @@ -+/* -+ * Broadcom specific AMBA -+ * System on Chip (SoC) Host -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+#include "scan.h" -+#include -+#include -+ -+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) -+{ -+ return readb(core->io_addr + offset); -+} -+ -+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) -+{ -+ return readw(core->io_addr + offset); -+} -+ -+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) -+{ -+ return readl(core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, -+ u8 value) -+{ -+ writeb(value, core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, -+ u16 value) -+{ -+ writew(value, core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, -+ u32 value) -+{ -+ writel(value, core->io_addr + offset); -+} -+ -+#ifdef CONFIG_BCMA_BLOCKIO -+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, -+ size_t count, u16 offset, u8 reg_width) -+{ -+ void __iomem *addr = core->io_addr + offset; -+ -+ switch (reg_width) { -+ case sizeof(u8): { -+ u8 *buf = buffer; -+ -+ while (count) { -+ *buf = __raw_readb(addr); -+ buf++; -+ count--; -+ } -+ break; -+ } -+ case sizeof(u16): { -+ __le16 *buf = buffer; -+ -+ WARN_ON(count & 1); -+ while (count) { -+ *buf = (__force __le16)__raw_readw(addr); -+ buf++; -+ count -= 2; -+ } -+ break; -+ } -+ case sizeof(u32): { -+ __le32 *buf = buffer; -+ -+ WARN_ON(count & 3); -+ while (count) { -+ *buf = (__force __le32)__raw_readl(addr); -+ buf++; -+ count -= 4; -+ } -+ break; -+ } -+ default: -+ WARN_ON(1); -+ } -+} -+ -+static void bcma_host_soc_block_write(struct bcma_device *core, -+ const void *buffer, -+ size_t count, u16 offset, u8 reg_width) -+{ -+ void __iomem *addr = core->io_addr + offset; -+ -+ switch (reg_width) { -+ case sizeof(u8): { -+ const u8 *buf = buffer; -+ -+ while (count) { -+ __raw_writeb(*buf, addr); -+ buf++; -+ count--; -+ } -+ break; -+ } -+ case sizeof(u16): { -+ const __le16 *buf = buffer; -+ -+ WARN_ON(count & 1); -+ while (count) { -+ __raw_writew((__force u16)(*buf), addr); -+ buf++; -+ count -= 2; -+ } -+ break; -+ } -+ case sizeof(u32): { -+ const __le32 *buf = buffer; -+ -+ WARN_ON(count & 3); -+ while (count) { -+ __raw_writel((__force u32)(*buf), addr); -+ buf++; -+ count -= 4; -+ } -+ break; -+ } -+ default: -+ WARN_ON(1); -+ } -+} -+#endif /* CONFIG_BCMA_BLOCKIO */ -+ -+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) -+{ -+ return readl(core->io_wrap + offset); -+} -+ -+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, -+ u32 value) -+{ -+ writel(value, core->io_wrap + offset); -+} -+ -+const struct bcma_host_ops bcma_host_soc_ops = { -+ .read8 = bcma_host_soc_read8, -+ .read16 = bcma_host_soc_read16, -+ .read32 = bcma_host_soc_read32, -+ .write8 = bcma_host_soc_write8, -+ .write16 = bcma_host_soc_write16, -+ .write32 = bcma_host_soc_write32, -+#ifdef CONFIG_BCMA_BLOCKIO -+ .block_read = bcma_host_soc_block_read, -+ .block_write = bcma_host_soc_block_write, -+#endif -+ .aread32 = bcma_host_soc_aread32, -+ .awrite32 = bcma_host_soc_awrite32, -+}; -+ -+int __init bcma_host_soc_register(struct bcma_soc *soc) -+{ -+ struct bcma_bus *bus = &soc->bus; -+ int err; -+ -+ /* iomap only first core. We have to read some register on this core -+ * to scan the bus. -+ */ -+ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); -+ if (!bus->mmio) -+ return -ENOMEM; -+ -+ /* Host specific */ -+ bus->hosttype = BCMA_HOSTTYPE_SOC; -+ bus->ops = &bcma_host_soc_ops; -+ -+ /* Register */ -+ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); -+ if (err) -+ iounmap(bus->mmio); -+ -+ return err; -+} ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -66,6 +66,10 @@ static struct bcma_device *bcma_find_cor - static void bcma_release_core_dev(struct device *dev) - { - struct bcma_device *core = container_of(dev, struct bcma_device, dev); -+ if (core->io_addr) -+ iounmap(core->io_addr); -+ if (core->io_wrap) -+ iounmap(core->io_wrap); - kfree(core); - } - -@@ -93,7 +97,10 @@ static int bcma_register_cores(struct bc - core->dma_dev = &bus->host_pci->dev; - core->irq = bus->host_pci->irq; - break; -- case BCMA_HOSTTYPE_NONE: -+ case BCMA_HOSTTYPE_SOC: -+ core->dev.dma_mask = &core->dev.coherent_dma_mask; -+ core->dma_dev = &core->dev; -+ break; - case BCMA_HOSTTYPE_SDIO: - break; - } ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -337,6 +337,16 @@ static int bcma_get_next_core(struct bcm - } - } - } -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { -+ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); -+ if (!core->io_addr) -+ return -ENOMEM; -+ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); -+ if (!core->io_wrap) { -+ iounmap(core->io_addr); -+ return -ENOMEM; -+ } -+ } - return 0; - } - -@@ -369,7 +379,14 @@ int bcma_bus_scan(struct bcma_bus *bus) - bcma_init_bus(bus); - - erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -- eromptr = bus->mmio; -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { -+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); -+ if (!eromptr) -+ return -ENOMEM; -+ } else { -+ eromptr = bus->mmio; -+ } -+ - eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); - - bcma_scan_switch_core(bus, erombase); -@@ -404,6 +421,9 @@ int bcma_bus_scan(struct bcma_bus *bus) - list_add(&core->list, &bus->cores); - } - -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ iounmap(eromptr); -+ - return 0; - } - -@@ -414,10 +434,18 @@ int __init bcma_bus_scan_early(struct bc - u32 erombase; - u32 __iomem *eromptr, *eromend; - -- int err, core_num = 0; -+ int err = -ENODEV; -+ int core_num = 0; - - erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -- eromptr = bus->mmio; -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { -+ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); -+ if (!eromptr) -+ return -ENOMEM; -+ } else { -+ eromptr = bus->mmio; -+ } -+ - eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); - - bcma_scan_switch_core(bus, erombase); -@@ -447,8 +475,12 @@ int __init bcma_bus_scan_early(struct bc - core->id.class); - - list_add(&core->list, &bus->cores); -- return 0; -+ err = 0; -+ break; - } - -- return -ENODEV; -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ iounmap(eromptr); -+ -+ return err; - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -14,9 +14,9 @@ struct bcma_device; - struct bcma_bus; - - enum bcma_hosttype { -- BCMA_HOSTTYPE_NONE, - BCMA_HOSTTYPE_PCI, - BCMA_HOSTTYPE_SDIO, -+ BCMA_HOSTTYPE_SOC, - }; - - struct bcma_chipinfo { -@@ -138,6 +138,9 @@ struct bcma_device { - u32 addr; - u32 wrap; - -+ void __iomem *io_addr; -+ void __iomem *io_wrap; -+ - void *drvdata; - struct list_head list; - }; ---- /dev/null -+++ b/include/linux/bcma/bcma_soc.h -@@ -0,0 +1,16 @@ -+#ifndef LINUX_BCMA_SOC_H_ -+#define LINUX_BCMA_SOC_H_ -+ -+#include -+ -+struct bcma_soc { -+ struct bcma_bus bus; -+ struct bcma_device core_cc; -+ struct bcma_device core_mips; -+}; -+ -+int __init bcma_host_soc_register(struct bcma_soc *soc); -+ -+int bcma_bus_register(struct bcma_bus *bus); -+ -+#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch b/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch deleted file mode 100644 index 31181a4883..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0005-bcma-add-mips-driver.patch +++ /dev/null @@ -1,456 +0,0 @@ -From 3be3bbe24a1d49283864a1e1ea1d88a2e1700b50 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 6 Jun 2011 00:07:32 +0200 -Subject: [PATCH 05/26] bcma: add mips driver - -This adds a mips driver to bcma. This is only found on embedded -devices. For now the driver just initializes the irqs used on this -system. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/Kconfig | 9 + - drivers/bcma/Makefile | 1 + - drivers/bcma/driver_mips.c | 243 +++++++++++++++++++++++++++ - drivers/bcma/main.c | 15 ++ - include/linux/bcma/bcma.h | 3 + - include/linux/bcma/bcma_driver_chipcommon.h | 13 ++ - include/linux/bcma/bcma_driver_mips.h | 49 ++++++ - 7 files changed, 333 insertions(+), 0 deletions(-) - create mode 100644 drivers/bcma/driver_mips.c - create mode 100644 include/linux/bcma/bcma_driver_mips.h - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -36,7 +36,16 @@ config BCMA_DRIVER_PCI_HOSTMODE - - config BCMA_HOST_SOC - bool -+ depends on BCMA_DRIVER_MIPS -+ -+config BCMA_DRIVER_MIPS -+ bool "BCMA Broadcom MIPS core driver" - depends on BCMA && MIPS -+ help -+ Driver for the Broadcom MIPS core attached to Broadcom specific -+ Advanced Microcontroller Bus. -+ -+ If unsure, say N - - config BCMA_DEBUG - bool "BCMA debugging" ---- a/drivers/bcma/Makefile -+++ b/drivers/bcma/Makefile -@@ -2,6 +2,7 @@ bcma-y += main.o scan.o core.o sprom - bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o - bcma-y += driver_pci.o - bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o -+bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o - bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o - bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o - obj-$(CONFIG_BCMA) += bcma.o ---- /dev/null -+++ b/drivers/bcma/driver_mips.c -@@ -0,0 +1,243 @@ -+/* -+ * Broadcom specific AMBA -+ * Broadcom MIPS32 74K core driver -+ * -+ * Copyright 2009, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2010, Bernhard Loos -+ * Copyright 2011, Hauke Mehrtens -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+/* The 47162a0 hangs when reading MIPS DMP registers registers */ -+static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) -+{ -+ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && -+ dev->id.id == BCMA_CORE_MIPS_74K; -+} -+ -+/* The 5357b0 hangs when reading USB20H DMP registers */ -+static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) -+{ -+ return (dev->bus->chipinfo.id == 0x5357 || -+ dev->bus->chipinfo.id == 0x4749) && -+ dev->bus->chipinfo.pkg == 11 && -+ dev->id.id == BCMA_CORE_USB20_HOST; -+} -+ -+static inline u32 mips_read32(struct bcma_drv_mips *mcore, -+ u16 offset) -+{ -+ return bcma_read32(mcore->core, offset); -+} -+ -+static inline void mips_write32(struct bcma_drv_mips *mcore, -+ u16 offset, -+ u32 value) -+{ -+ bcma_write32(mcore->core, offset, value); -+} -+ -+static const u32 ipsflag_irq_mask[] = { -+ 0, -+ BCMA_MIPS_IPSFLAG_IRQ1, -+ BCMA_MIPS_IPSFLAG_IRQ2, -+ BCMA_MIPS_IPSFLAG_IRQ3, -+ BCMA_MIPS_IPSFLAG_IRQ4, -+}; -+ -+static const u32 ipsflag_irq_shift[] = { -+ 0, -+ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, -+}; -+ -+static u32 bcma_core_mips_irqflag(struct bcma_device *dev) -+{ -+ u32 flag; -+ -+ if (bcma_core_mips_bcm47162a0_quirk(dev)) -+ return dev->core_index; -+ if (bcma_core_mips_bcm5357b0_quirk(dev)) -+ return dev->core_index; -+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); -+ -+ return flag & 0x1F; -+} -+ -+/* Get the MIPS IRQ assignment for a specified device. -+ * If unassigned, 0 is returned. -+ */ -+unsigned int bcma_core_mips_irq(struct bcma_device *dev) -+{ -+ struct bcma_device *mdev = dev->bus->drv_mips.core; -+ u32 irqflag; -+ unsigned int irq; -+ -+ irqflag = bcma_core_mips_irqflag(dev); -+ -+ for (irq = 1; irq <= 4; irq++) -+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & -+ (1 << irqflag)) -+ return irq; -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_mips_irq); -+ -+static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) -+{ -+ unsigned int oldirq = bcma_core_mips_irq(dev); -+ struct bcma_bus *bus = dev->bus; -+ struct bcma_device *mdev = bus->drv_mips.core; -+ u32 irqflag; -+ -+ irqflag = bcma_core_mips_irqflag(dev); -+ BUG_ON(oldirq == 6); -+ -+ dev->irq = irq + 2; -+ -+ /* clear the old irq */ -+ if (oldirq == 0) -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), -+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & -+ ~(1 << irqflag)); -+ else -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); -+ -+ /* assign the new one */ -+ if (irq == 0) { -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), -+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | -+ (1 << irqflag)); -+ } else { -+ u32 oldirqflag = bcma_read32(mdev, -+ BCMA_MIPS_MIPS74K_INTMASK(irq)); -+ if (oldirqflag) { -+ struct bcma_device *core; -+ -+ /* backplane irq line is in use, find out who uses -+ * it and set user to irq 0 -+ */ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ if ((1 << bcma_core_mips_irqflag(core)) == -+ oldirqflag) { -+ bcma_core_mips_set_irq(core, 0); -+ break; -+ } -+ } -+ } -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), -+ 1 << irqflag); -+ } -+ -+ pr_info("set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.id, oldirq + 2, irq + 2); -+} -+ -+static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) -+{ -+ int i; -+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -+ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); -+ for (i = 0; i <= 6; i++) -+ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); -+ printk("\n"); -+} -+ -+static void bcma_core_mips_dump_irq(struct bcma_bus *bus) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); -+ } -+} -+ -+static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus = mcore->core->bus; -+ -+ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ case BCMA_CC_FLASHT_ATSER: -+ pr_err("Serial flash not supported.\n"); -+ break; -+ case BCMA_CC_FLASHT_PARA: -+ pr_info("found parallel flash.\n"); -+ bus->drv_cc.pflash.window = 0x1c000000; -+ bus->drv_cc.pflash.window_size = 0x02000000; -+ -+ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & -+ BCMA_CC_FLASH_CFG_DS) == 0) -+ bus->drv_cc.pflash.buswidth = 1; -+ else -+ bus->drv_cc.pflash.buswidth = 2; -+ break; -+ default: -+ pr_err("flash not supported.\n"); -+ } -+} -+ -+void bcma_core_mips_init(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus; -+ struct bcma_device *core; -+ bus = mcore->core->bus; -+ -+ pr_info("Initializing MIPS core...\n"); -+ -+ if (!mcore->setup_done) -+ mcore->assigned_irqs = 1; -+ -+ /* Assign IRQs to all cores on the bus */ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ int mips_irq; -+ if (core->irq) -+ continue; -+ -+ mips_irq = bcma_core_mips_irq(core); -+ if (mips_irq > 4) -+ core->irq = 0; -+ else -+ core->irq = mips_irq + 2; -+ if (core->irq > 5) -+ continue; -+ switch (core->id.id) { -+ case BCMA_CORE_PCI: -+ case BCMA_CORE_PCIE: -+ case BCMA_CORE_ETHERNET: -+ case BCMA_CORE_ETHERNET_GBIT: -+ case BCMA_CORE_MAC_GBIT: -+ case BCMA_CORE_80211: -+ case BCMA_CORE_USB20_HOST: -+ /* These devices get their own IRQ line if available, -+ * the rest goes on IRQ0 -+ */ -+ if (mcore->assigned_irqs <= 4) -+ bcma_core_mips_set_irq(core, -+ mcore->assigned_irqs++); -+ break; -+ } -+ } -+ pr_info("IRQ reconfiguration done\n"); -+ bcma_core_mips_dump_irq(bus); -+ -+ if (mcore->setup_done) -+ return; -+ -+ bcma_core_mips_flash_detect(mcore); -+ mcore->setup_done = true; -+} ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -84,6 +84,7 @@ static int bcma_register_cores(struct bc - case BCMA_CORE_CHIPCOMMON: - case BCMA_CORE_PCI: - case BCMA_CORE_PCIE: -+ case BCMA_CORE_MIPS_74K: - continue; - } - -@@ -147,6 +148,13 @@ int bcma_bus_register(struct bcma_bus *b - bcma_core_chipcommon_init(&bus->drv_cc); - } - -+ /* Init MIPS core */ -+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); -+ if (core) { -+ bus->drv_mips.core = core; -+ bcma_core_mips_init(&bus->drv_mips); -+ } -+ - /* Init PCIE core */ - core = bcma_find_core(bus, BCMA_CORE_PCIE); - if (core) { -@@ -217,6 +225,13 @@ int __init bcma_bus_early_register(struc - bcma_core_chipcommon_init(&bus->drv_cc); - } - -+ /* Init MIPS core */ -+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); -+ if (core) { -+ bus->drv_mips.core = core; -+ bcma_core_mips_init(&bus->drv_mips); -+ } -+ - pr_info("Early bus registered\n"); - - return 0; ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -6,6 +6,7 @@ - - #include - #include -+#include - #include /* SPROM sharing */ - - #include "bcma_regs.h" -@@ -130,6 +131,7 @@ struct bcma_device { - - struct device dev; - struct device *dma_dev; -+ - unsigned int irq; - bool dev_registered; - -@@ -197,6 +199,7 @@ struct bcma_bus { - - struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; -+ struct bcma_drv_mips drv_mips; - - /* We decided to share SPROM struct with SSB as long as we do not need - * any hacks for BCMA. This simplifies drivers code. */ ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -24,6 +24,7 @@ - #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ - #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ - #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ -+#define BCMA_CC_FLASHT_NFLASH 0x00000200 - #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ - #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ - #define BCMA_PLLTYPE_NONE 0x00000000 -@@ -178,6 +179,7 @@ - #define BCMA_CC_PROG_CFG 0x0120 - #define BCMA_CC_PROG_WAITCNT 0x0124 - #define BCMA_CC_FLASH_CFG 0x0128 -+#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ - #define BCMA_CC_FLASH_WAITCNT 0x012C - /* 0x1E0 is defined as shared BCMA_CLKCTLST */ - #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ -@@ -247,6 +249,14 @@ struct bcma_chipcommon_pmu { - u32 crystalfreq; /* The active crystal frequency (in kHz) */ - }; - -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+struct bcma_pflash { -+ u8 buswidth; -+ u32 window; -+ u32 window_size; -+}; -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ -+ - struct bcma_drv_cc { - struct bcma_device *core; - u32 status; -@@ -256,6 +266,9 @@ struct bcma_drv_cc { - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct bcma_chipcommon_pmu pmu; -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+ struct bcma_pflash pflash; -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ - }; - - /* Register access */ ---- /dev/null -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -0,0 +1,49 @@ -+#ifndef LINUX_BCMA_DRIVER_MIPS_H_ -+#define LINUX_BCMA_DRIVER_MIPS_H_ -+ -+#define BCMA_MIPS_IPSFLAG 0x0F08 -+/* which sbflags get routed to mips interrupt 1 */ -+#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F -+#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 -+/* which sbflags get routed to mips interrupt 2 */ -+#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 -+#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 -+/* which sbflags get routed to mips interrupt 3 */ -+#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 -+#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 -+/* which sbflags get routed to mips interrupt 4 */ -+#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 -+#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 -+ -+/* MIPS 74K core registers */ -+#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 -+#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 -+#define BCMA_MIPS_MIPS74K_BIST 0x000C -+#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 -+#define BCMA_MIPS_MIPS74K_INTMASK(int) \ -+ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) -+#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C -+#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 -+#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 -+#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 -+#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 -+ -+#define BCMA_MIPS_OOBSELOUTA30 0x100 -+ -+struct bcma_device; -+ -+struct bcma_drv_mips { -+ struct bcma_device *core; -+ u8 setup_done:1; -+ unsigned int assigned_irqs; -+}; -+ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); -+#else -+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } -+#endif -+ -+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); -+ -+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch b/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch deleted file mode 100644 index fd7b8ae78e..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0006-bcma-add-serial-console-support.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 4d58b9a14669e5ea0026f0d27257041aecfcbed3 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 6 Jun 2011 00:07:33 +0200 -Subject: [PATCH 06/26] bcma: add serial console support - -This adds support for serial console to bcma, when operating on an SoC. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/bcma_private.h | 8 ++++ - drivers/bcma/driver_chipcommon.c | 48 +++++++++++++++++++++++++++ - drivers/bcma/driver_chipcommon_pmu.c | 26 ++++++++++++++ - drivers/bcma/driver_mips.c | 1 + - include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++ - 5 files changed, 97 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus) - /* sprom.c */ - int bcma_sprom_get(struct bcma_bus *bus); - -+/* driver_chipcommon.c */ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ -+ -+/* driver_chipcommon_pmu.c */ -+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); -+ - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ - extern int __init bcma_host_pci_init(void); ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -106,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcm - { - return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); - } -+ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+void bcma_chipco_serial_init(struct bcma_drv_cc *cc) -+{ -+ unsigned int irq; -+ u32 baud_base; -+ u32 i; -+ unsigned int ccrev = cc->core->id.rev; -+ struct bcma_serial_port *ports = cc->serial_ports; -+ -+ if (ccrev >= 11 && ccrev != 15) { -+ /* Fixed ALP clock */ -+ baud_base = bcma_pmu_alp_clock(cc); -+ if (ccrev >= 21) { -+ /* Turn off UART clock before switching clocksource. */ -+ bcma_cc_write32(cc, BCMA_CC_CORECTL, -+ bcma_cc_read32(cc, BCMA_CC_CORECTL) -+ & ~BCMA_CC_CORECTL_UARTCLKEN); -+ } -+ /* Set the override bit so we don't divide it */ -+ bcma_cc_write32(cc, BCMA_CC_CORECTL, -+ bcma_cc_read32(cc, BCMA_CC_CORECTL) -+ | BCMA_CC_CORECTL_UARTCLK0); -+ if (ccrev >= 21) { -+ /* Re-enable the UART clock. */ -+ bcma_cc_write32(cc, BCMA_CC_CORECTL, -+ bcma_cc_read32(cc, BCMA_CC_CORECTL) -+ | BCMA_CC_CORECTL_UARTCLKEN); -+ } -+ } else { -+ pr_err("serial not supported on this device ccrev: 0x%x\n", -+ ccrev); -+ return; -+ } -+ -+ irq = bcma_core_mips_irq(cc->core); -+ -+ /* Determine the registers of the UARTs */ -+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); -+ for (i = 0; i < cc->nr_serial_ports; i++) { -+ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + -+ (i * 256); -+ ports[i].irq = irq; -+ ports[i].baud_base = baud_base; -+ ports[i].reg_shift = 0; -+ } -+} -+#endif /* CONFIG_BCMA_DRIVER_MIPS */ ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -136,3 +136,29 @@ void bcma_pmu_init(struct bcma_drv_cc *c - bcma_pmu_swreg_init(cc); - bcma_pmu_workarounds(cc); - } -+ -+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ switch (bus->chipinfo.id) { -+ case 0x4716: -+ case 0x4748: -+ case 47162: -+ case 0x4313: -+ case 0x5357: -+ case 0x4749: -+ case 53572: -+ /* always 20Mhz */ -+ return 20000 * 1000; -+ case 0x5356: -+ case 0x5300: -+ /* always 25Mhz */ -+ return 25000 * 1000; -+ default: -+ pr_warn("No ALP clock specified for %04X device, " -+ "pmu rev. %d, using default %d Hz\n", -+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); -+ } -+ return BCMA_CC_PMU_ALP_CLOCK; -+} ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -238,6 +238,7 @@ void bcma_core_mips_init(struct bcma_drv - if (mcore->setup_done) - return; - -+ bcma_chipco_serial_init(&bus->drv_cc); - bcma_core_mips_flash_detect(mcore); - mcore->setup_done = true; - } ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -241,6 +241,9 @@ - #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ - #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ - -+/* ALP clock on pre-PMU chips */ -+#define BCMA_CC_PMU_ALP_CLOCK 20000000 -+ - /* Data for the PMU, if available. - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ -@@ -255,6 +258,14 @@ struct bcma_pflash { - u32 window; - u32 window_size; - }; -+ -+struct bcma_serial_port { -+ void *regs; -+ unsigned long clockspeed; -+ unsigned int irq; -+ unsigned int baud_base; -+ unsigned int reg_shift; -+}; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ - - struct bcma_drv_cc { -@@ -268,6 +279,9 @@ struct bcma_drv_cc { - struct bcma_chipcommon_pmu pmu; - #ifdef CONFIG_BCMA_DRIVER_MIPS - struct bcma_pflash pflash; -+ -+ int nr_serial_ports; -+ struct bcma_serial_port serial_ports[4]; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ - }; - diff --git a/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch b/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch deleted file mode 100644 index 7fa752056b..0000000000 --- a/target/linux/brcm47xx/patches-3.0/0007-bcma-get-CPU-clock.patch +++ /dev/null @@ -1,229 +0,0 @@ -From bd2bb5fbf1982b18f44b6fd78e45717e0757cdc0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 16 Jul 2011 15:19:38 +0200 -Subject: [PATCH 07/26] bcma: get CPU clock - -Add method to return the clock of the CPU. This is needed by the arch -code to calculate the mips_hpt_frequency. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/bcma_private.h | 1 + - drivers/bcma/driver_chipcommon_pmu.c | 107 +++++++++++++++++++++++++++ - drivers/bcma/driver_mips.c | 12 +++ - include/linux/bcma/bcma_driver_chipcommon.h | 39 ++++++++++ - include/linux/bcma/bcma_driver_mips.h | 2 + - 5 files changed, 161 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -36,6 +36,7 @@ void bcma_chipco_serial_init(struct bcma - - /* driver_chipcommon_pmu.c */ - u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); -+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); - - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -11,6 +11,13 @@ - #include "bcma_private.h" - #include - -+static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) -+{ -+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); -+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); -+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); -+} -+ - static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, - u32 offset, u32 mask, u32 set) - { -@@ -162,3 +169,103 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c - } - return BCMA_CC_PMU_ALP_CLOCK; - } -+ -+/* Find the output of the "m" pll divider given pll controls that start with -+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. -+ */ -+static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) -+{ -+ u32 tmp, div, ndiv, p1, p2, fc; -+ struct bcma_bus *bus = cc->core->bus; -+ -+ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); -+ -+ BUG_ON(!m || m > 4); -+ -+ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { -+ /* Detect failure in clock setting */ -+ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); -+ if (tmp & 0x40000) -+ return 133 * 1000000; -+ } -+ -+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); -+ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; -+ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; -+ -+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); -+ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & -+ BCMA_CC_PPL_MDIV_MASK; -+ -+ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); -+ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; -+ -+ /* Do calculation in Mhz */ -+ fc = bcma_pmu_alp_clock(cc) / 1000000; -+ fc = (p1 * ndiv * fc) / p2; -+ -+ /* Return clock in Hertz */ -+ return (fc / div) * 1000000; -+} -+ -+/* query bus clock frequency for PMU-enabled chipcommon */ -+u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ switch (bus->chipinfo.id) { -+ case 0x4716: -+ case 0x4748: -+ case 47162: -+ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case 0x5356: -+ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case 0x5357: -+ case 0x4749: -+ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case 0x5300: -+ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, -+ BCMA_CC_PMU5_MAINPLL_SSB); -+ case 53572: -+ return 75000000; -+ default: -+ pr_warn("No backplane clock specified for %04X device, " -+ "pmu rev. %d, using default %d Hz\n", -+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); -+ } -+ return BCMA_CC_PMU_HT_CLOCK; -+} -+ -+/* query cpu clock frequency for PMU-enabled chipcommon */ -+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ -+ if (bus->chipinfo.id == 53572) -+ return 300000000; -+ -+ if (cc->pmu.rev >= 5) { -+ u32 pll; -+ switch (bus->chipinfo.id) { -+ case 0x5356: -+ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; -+ break; -+ case 0x5357: -+ case 0x4749: -+ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; -+ break; -+ default: -+ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; -+ break; -+ } -+ -+ /* TODO: if (bus->chipinfo.id == 0x5300) -+ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ -+ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); -+ } -+ -+ return bcma_pmu_get_clockcontrol(cc); -+} ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -166,6 +166,18 @@ static void bcma_core_mips_dump_irq(stru - } - } - -+u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus = mcore->core->bus; -+ -+ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) -+ return bcma_pmu_get_clockcpu(&bus->drv_cc); -+ -+ pr_err("No PMU available, need this to get the cpu clock\n"); -+ return 0; -+} -+EXPORT_SYMBOL(bcma_cpu_clock); -+ - static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) - { - struct bcma_bus *bus = mcore->core->bus; ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -241,8 +241,47 @@ - #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ - #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ - -+/* Divider allocation in 4716/47162/5356 */ -+#define BCMA_CC_PMU5_MAINPLL_CPU 1 -+#define BCMA_CC_PMU5_MAINPLL_MEM 2 -+#define BCMA_CC_PMU5_MAINPLL_SSB 3 -+ -+/* PLL usage in 4716/47162 */ -+#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 -+ -+/* PLL usage in 5356/5357 */ -+#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 -+#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 -+ -+/* 4706 PMU */ -+#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 -+ - /* ALP clock on pre-PMU chips */ - #define BCMA_CC_PMU_ALP_CLOCK 20000000 -+/* HT clock for systems with PMU-enabled chipcommon */ -+#define BCMA_CC_PMU_HT_CLOCK 80000000 -+ -+/* PMU rev 5 (& 6) */ -+#define BCMA_CC_PPL_P1P2_OFF 0 -+#define BCMA_CC_PPL_P1_MASK 0x0f000000 -+#define BCMA_CC_PPL_P1_SHIFT 24 -+#define BCMA_CC_PPL_P2_MASK 0x00f00000 -+#define BCMA_CC_PPL_P2_SHIFT 20 -+#define BCMA_CC_PPL_M14_OFF 1 -+#define BCMA_CC_PPL_MDIV_MASK 0x000000ff -+#define BCMA_CC_PPL_MDIV_WIDTH 8 -+#define BCMA_CC_PPL_NM5_OFF 2 -+#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 -+#define BCMA_CC_PPL_NDIV_SHIFT 20 -+#define BCMA_CC_PPL_FMAB_OFF 3 -+#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 -+#define BCMA_CC_PPL_MRAT_SHIFT 28 -+#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 -+#define BCMA_CC_PPL_ABRAT_SHIFT 27 -+#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff -+#define BCMA_CC_PPL_PLLCTL_OFF 4 -+#define BCMA_CC_PPL_PCHI_OFF 5 -+#define BCMA_CC_PPL_PCHI_MASK 0x0000003f - - /* Data for the PMU, if available. - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) ---- a/include/linux/bcma/bcma_driver_mips.h -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -44,6 +44,8 @@ extern void bcma_core_mips_init(struct b - static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } - #endif - -+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -+ - extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); - - #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch index 9a4e877287..11855b4496 100644 --- a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch +++ b/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch @@ -104,9 +104,9 @@ Signed-off-by: Hauke Mehrtens #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -283,6 +341,12 @@ - #define BCMA_CC_PPL_PCHI_OFF 5 - #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +@@ -300,6 +358,12 @@ + #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ + #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ +#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ @@ -117,7 +117,7 @@ Signed-off-by: Hauke Mehrtens /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -292,6 +356,10 @@ struct bcma_chipcommon_pmu { +@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu { }; #ifdef CONFIG_BCMA_DRIVER_MIPS @@ -128,7 +128,7 @@ Signed-off-by: Hauke Mehrtens struct bcma_pflash { u8 buswidth; u32 window; -@@ -317,7 +385,10 @@ struct bcma_drv_cc { +@@ -334,7 +402,10 @@ struct bcma_drv_cc { u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch index 14e5a3bcc9..e78f3c4576 100644 --- a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch +++ b/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch @@ -40,7 +40,7 @@ Signed-off-by: Hauke Mehrtens bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -38,6 +38,11 @@ void bcma_chipco_serial_init(struct bcma +@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); @@ -629,7 +629,7 @@ Signed-off-by: Hauke Mehrtens pr_info("found parallel flash.\n"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -358,6 +358,7 @@ struct bcma_chipcommon_pmu { +@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS enum bcma_flash_type { BCMA_PFLASH, @@ -637,7 +637,7 @@ Signed-off-by: Hauke Mehrtens }; struct bcma_pflash { -@@ -366,6 +367,14 @@ struct bcma_pflash { +@@ -383,6 +384,14 @@ struct bcma_pflash { u32 window_size; }; @@ -652,7 +652,7 @@ Signed-off-by: Hauke Mehrtens struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -388,6 +397,9 @@ struct bcma_drv_cc { +@@ -405,6 +414,9 @@ struct bcma_drv_cc { enum bcma_flash_type flash_type; union { struct bcma_pflash pflash; @@ -662,9 +662,9 @@ Signed-off-by: Hauke Mehrtens }; int nr_serial_ports; -@@ -431,4 +443,16 @@ u32 bcma_chipco_gpio_polarity(struct bcm - /* PMU support */ - extern void bcma_pmu_init(struct bcma_drv_cc *cc); +@@ -459,4 +471,16 @@ extern void bcma_chipco_chipctl_maskset( + extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +#ifdef CONFIG_BCMA_SFLASH +/* Chipcommon sflash support. */ diff --git a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch b/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch index d83ad5326e..fee1d0a5a6 100644 --- a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch +++ b/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch @@ -19,7 +19,7 @@ Signed-off-by: Hauke Mehrtens #define SPOFF(offset) ((offset) / sizeof(u16)) -@@ -144,8 +145,10 @@ int bcma_sprom_get(struct bcma_bus *bus) +@@ -214,8 +215,10 @@ int bcma_sprom_get(struct bcma_bus *bus) if (!bus->drv_cc.core) return -EOPNOTSUPP; diff --git a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch index 6055e0a738..61f0a7ecad 100644 --- a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch +++ b/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch @@ -31,7 +31,7 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1104,6 +1104,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) +@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) if (bus->chip_id == 0x5365) { rate = 100000000; diff --git a/target/linux/brcm47xx/patches-3.0/230-ssb_pci_sprom.patch b/target/linux/brcm47xx/patches-3.0/230-ssb_pci_sprom.patch deleted file mode 100644 index 30f133bb56..0000000000 --- a/target/linux/brcm47xx/patches-3.0/230-ssb_pci_sprom.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -516,10 +516,14 @@ static void ssb_pcicore_pcie_setup_worka - - static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) - { -- ssb_pcicore_fix_sprom_core_index(pc); -+ struct ssb_device *pdev = pc->dev; -+ struct ssb_bus *bus = pdev->bus; -+ -+ if (bus->bustype == SSB_BUSTYPE_PCI) -+ ssb_pcicore_fix_sprom_core_index(pc); - - /* Disable PCI interrupts. */ -- ssb_write32(pc->dev, SSB_INTVEC, 0); -+ ssb_write32(pdev, SSB_INTVEC, 0); - - /* Additional PCIe always once-executed workarounds */ - if (pc->dev->id.coreid == SSB_DEV_PCIE) { diff --git a/target/linux/brcm47xx/patches-3.0/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-3.0/951-brcm4716-defines.patch index 25cd469964..18685af6eb 100644 --- a/target/linux/brcm47xx/patches-3.0/951-brcm4716-defines.patch +++ b/target/linux/brcm47xx/patches-3.0/951-brcm4716-defines.patch @@ -25,7 +25,7 @@ ssb_printk(KERN_ERR PFX --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -157,9 +157,16 @@ struct ssb_bus_ops { +@@ -166,9 +166,16 @@ struct ssb_bus_ops { #define SSB_DEV_MINI_MACPHY 0x823 #define SSB_DEV_ARM_1176 0x824 #define SSB_DEV_ARM_7TDMI 0x825 @@ -60,7 +60,7 @@ /* Enumeration space constants */ #define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ -@@ -499,5 +501,41 @@ enum { +@@ -556,5 +558,41 @@ enum { #define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ #define SSB_ADM_BASE2_SHIFT 16 diff --git a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch index f9c994a60f..a95db6eb92 100644 --- a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-y += platform/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warning("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warning("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch index 3b54067d74..71f5b74a7e 100644 --- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch @@ -33,7 +33,22 @@ ssb-y += driver_chipcommon.o --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c -@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +@@ -24,6 +25,7 @@ static const struct pci_device_id b43_pc { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, @@ -43,6 +58,15 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -192,6 +216,15 @@ { --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -359,6 +392,15 @@ +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -12,6 +12,7 @@ #include #include @@ -403,6 +445,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { static inline u32 ssb_irqflag(struct ssb_device *dev) @@ -567,6 +618,15 @@ ssb_mips_flash_detect(mcore); --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -646,7 +706,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -759,10 +819,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -784,7 +849,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc +@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -914,7 +979,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); /* Enable interrupts for this device. */ @@ -930,7 +995,7 @@ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); if (err) goto out; -@@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -983,7 +1048,22 @@ out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -17,6 +17,8 @@ +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,11 +12,14 @@ + + #include + #include ++#include + #include + #include #include #include #include @@ -992,7 +1072,7 @@ #include #include -@@ -88,6 +90,25 @@ found: +@@ -88,6 +91,25 @@ found: } #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1018,7 +1098,7 @@ int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)) { -@@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de +@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de put_device(dev->dev); } @@ -1038,7 +1118,7 @@ static int ssb_device_resume(struct device *dev) { struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -1181,7 +1261,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi +@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -1217,7 +1297,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = { +@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -1225,7 +1305,7 @@ }; static void ssb_buses_lock(void) -@@ -461,6 +516,7 @@ static int ssb_devices_register(struct s +@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -1233,7 +1313,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -469,8 +525,14 @@ static int ssb_devices_register(struct s +@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s dev->parent = &bus->host_pcmcia->dev; #endif break; @@ -1248,7 +1328,7 @@ break; } -@@ -497,7 +559,7 @@ error: +@@ -497,7 +560,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -1257,7 +1337,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -708,9 +770,9 @@ out: +@@ -708,9 +771,9 @@ out: return err; } @@ -1270,7 +1350,7 @@ { int err; -@@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b +@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto out; @@ -1290,7 +1370,7 @@ /* Init PCI-host device (if any) */ err = ssb_pci_init(bus); -@@ -776,6 +844,8 @@ err_pci_exit: +@@ -776,6 +845,8 @@ err_pci_exit: ssb_pci_exit(bus); err_unmap: ssb_iounmap(bus); @@ -1299,7 +1379,7 @@ err_disable_xtal: ssb_buses_unlock(); ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); -@@ -783,8 +853,8 @@ err_disable_xtal: +@@ -783,8 +854,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -1310,7 +1390,7 @@ { int err; -@@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -1320,7 +1400,7 @@ } return err; -@@ -804,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -1333,7 +1413,7 @@ { int err; -@@ -825,9 +898,32 @@ int ssb_bus_pcmciabus_register(struct ss +@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1369,7 +1449,7 @@ { int err; -@@ -908,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1380,7 +1460,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1024,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1411,7 +1491,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device +@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1425,7 +1505,7 @@ { int i; u32 val; -@@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1434,7 +1514,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1482,19 +1562,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1155,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (dev->bus->host_pci->is_pcie && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1272,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1519,7 +1623,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1293,6 +1409,37 @@ error: +@@ -1293,6 +1428,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1557,7 +1661,7 @@ u32 ssb_admatch_base(u32 adm) { u32 base = 0; -@@ -1358,8 +1505,10 @@ static int __init ssb_modinit(void) +@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void) ssb_buses_lock(); err = ssb_attach_queued_buses(); ssb_buses_unlock(); @@ -1569,7 +1673,7 @@ err = b43_pci_ssb_bridge_init(); if (err) { -@@ -1375,7 +1524,7 @@ static int __init ssb_modinit(void) +@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void) /* don't fail SSB init because of this */ err = 0; } @@ -1580,6 +1684,15 @@ /* ssb must be initialized after PCI but before the ssb drivers. --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,6 +17,7 @@ #include @@ -1768,16 +1881,39 @@ /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ +@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1835,7 +1971,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +662,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1873,7 +2009,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1903,7 +2039,7 @@ err = 0; goto out_free; } -@@ -602,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -1928,7 +2064,14 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c -@@ -12,6 +12,7 @@ +@@ -6,12 +6,13 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. */ #include @@ -1976,6 +2119,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st ssb_printk("."); err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); @@ -2003,10 +2155,7 @@ +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) - { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; ++{ + struct ssb_sprom *sprom = priv; + + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) @@ -2022,7 +2171,10 @@ +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) -+{ + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; + struct ssb_init_invariants *iv = priv; struct ssb_sprom *sprom = &iv->sprom; struct ssb_boardinfo *bi = &iv->boardinfo; @@ -2249,6 +2401,15 @@ --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, u16 offset) @@ -2360,7 +2521,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg -+ * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * @@ -2964,6 +3125,15 @@ +} --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -13,8 +13,11 @@ #include "ssb_private.h" @@ -3043,29 +3213,31 @@ /** - * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. -+ * ssb_arch_register_fallback_sprom - Registers a method providing a -+ * fallback SPROM if no SPROM is found. - * +- * - * @sprom: The SPROM data structure to register. -+ * @sprom_callback: The callback function. - * +- * - * With this function the architecture implementation may register a fallback - * SPROM data structure. The fallback is only used for PCI based SSB devices, - * where no valid SPROM can be found in the shadow registers. -+ * With this function the architecture implementation may register a -+ * callback handler which fills the SPROM data structure. The fallback is -+ * only used for PCI based SSB devices, where no valid SPROM can be found -+ * in the shadow registers. ++ * ssb_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. * - * This function is useful for weird architectures that have a half-assed SSB device - * hardwired to their PCI bus. -+ * This function is useful for weird architectures that have a half-assed -+ * SSB device hardwired to their PCI bus. ++ * @sprom_callback: The callback function. * - * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently - * don't use this fallback. - * Architectures must provide the SPROM for native SSB devices anyway, - * so the fallback also isn't used for native devices. ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * only used for PCI based SSB devices, where no valid SPROM can be found ++ * in the shadow registers. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * SSB device hardwired to their PCI bus. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so @@ -3219,9 +3391,12 @@ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,24 +27,60 @@ struct ssb_sprom { +@@ -25,26 +25,62 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ @@ -3286,11 +3461,20 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +94,14 @@ struct ssb_sprom { +@@ -58,14 +94,23 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; @@ -3303,7 +3487,7 @@ }; -@@ -137,7 +173,7 @@ struct ssb_device { +@@ -137,7 +182,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3312,7 +3496,21 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -208,6 +244,7 @@ enum ssb_bustype { +@@ -195,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -208,6 +252,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3320,7 +3518,7 @@ }; /* board_vendor */ -@@ -238,20 +275,33 @@ struct ssb_bus { +@@ -238,20 +283,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3362,7 +3560,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +310,8 @@ struct ssb_bus { +@@ -260,7 +318,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3372,7 +3570,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +357,11 @@ struct ssb_bus { +@@ -306,6 +365,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3384,7 +3582,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +392,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3409,7 +3607,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -3419,6 +3617,15 @@ extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -53,6 +53,7 @@ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ @@ -3669,7 +3876,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,104 +267,200 @@ +@@ -264,104 +267,257 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -3893,6 +4100,23 @@ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -3924,6 +4148,68 @@ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++ ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ diff --git a/target/linux/generic/patches-2.6.31/025-bcma_backport.patch b/target/linux/generic/patches-2.6.31/025-bcma_backport.patch index 7203de393c..f713e2bf9b 100644 --- a/target/linux/generic/patches-2.6.31/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.31/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-$(CONFIG_STAGING) += staging/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warning("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warning("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch index 2372435d17..e86ec9ba1a 100644 --- a/target/linux/generic/patches-2.6.31/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch @@ -33,7 +33,22 @@ ssb-y += driver_chipcommon.o --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c -@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +@@ -24,6 +25,7 @@ static const struct pci_device_id b43_pc { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, @@ -43,6 +58,15 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -192,6 +216,15 @@ { --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -359,6 +392,15 @@ +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -12,6 +12,7 @@ #include #include @@ -403,6 +445,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); } @@ -424,6 +475,15 @@ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -503,7 +563,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -616,10 +676,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -641,7 +706,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc +@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -771,7 +836,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); /* Enable interrupts for this device. */ @@ -787,7 +852,7 @@ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); if (err) goto out; -@@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -840,7 +905,22 @@ out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -17,6 +17,8 @@ +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,11 +12,14 @@ + + #include + #include ++#include + #include + #include #include #include #include @@ -849,7 +929,7 @@ #include #include -@@ -88,6 +90,25 @@ found: +@@ -88,6 +91,25 @@ found: } #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -875,7 +955,7 @@ int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)) { -@@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de +@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de put_device(dev->dev); } @@ -895,7 +975,7 @@ static int ssb_device_resume(struct device *dev) { struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -1038,7 +1118,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi +@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -1074,7 +1154,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = { +@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -1082,7 +1162,7 @@ }; static void ssb_buses_lock(void) -@@ -461,6 +516,7 @@ static int ssb_devices_register(struct s +@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -1090,7 +1170,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -469,8 +525,14 @@ static int ssb_devices_register(struct s +@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s dev->parent = &bus->host_pcmcia->dev; #endif break; @@ -1105,7 +1185,7 @@ break; } -@@ -497,7 +559,7 @@ error: +@@ -497,7 +560,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -1114,7 +1194,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -708,9 +770,9 @@ out: +@@ -708,9 +771,9 @@ out: return err; } @@ -1127,7 +1207,7 @@ { int err; -@@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b +@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto out; @@ -1147,7 +1227,7 @@ /* Init PCI-host device (if any) */ err = ssb_pci_init(bus); -@@ -776,6 +844,8 @@ err_pci_exit: +@@ -776,6 +845,8 @@ err_pci_exit: ssb_pci_exit(bus); err_unmap: ssb_iounmap(bus); @@ -1156,7 +1236,7 @@ err_disable_xtal: ssb_buses_unlock(); ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); -@@ -783,8 +853,8 @@ err_disable_xtal: +@@ -783,8 +854,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -1167,7 +1247,7 @@ { int err; -@@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -1177,7 +1257,7 @@ } return err; -@@ -804,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -1190,7 +1270,7 @@ { int err; -@@ -825,9 +898,32 @@ int ssb_bus_pcmciabus_register(struct ss +@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1226,7 +1306,7 @@ { int err; -@@ -908,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1237,7 +1317,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1024,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1268,7 +1348,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device +@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1282,7 +1362,7 @@ { int i; u32 val; -@@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1291,7 +1371,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1339,19 +1419,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1155,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (dev->bus->host_pci->is_pcie && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1272,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1376,7 +1480,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1293,6 +1409,37 @@ error: +@@ -1293,6 +1428,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1414,7 +1518,7 @@ u32 ssb_admatch_base(u32 adm) { u32 base = 0; -@@ -1358,8 +1505,10 @@ static int __init ssb_modinit(void) +@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void) ssb_buses_lock(); err = ssb_attach_queued_buses(); ssb_buses_unlock(); @@ -1426,7 +1530,7 @@ err = b43_pci_ssb_bridge_init(); if (err) { -@@ -1375,7 +1524,7 @@ static int __init ssb_modinit(void) +@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void) /* don't fail SSB init because of this */ err = 0; } @@ -1437,6 +1541,15 @@ /* ssb must be initialized after PCI but before the ssb drivers. --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,6 +17,7 @@ #include @@ -1625,16 +1738,39 @@ /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ +@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1692,7 +1828,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +662,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1730,7 +1866,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1760,7 +1896,7 @@ err = 0; goto out_free; } -@@ -602,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -1785,7 +1921,14 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c -@@ -12,6 +12,7 @@ +@@ -6,12 +6,13 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. */ #include @@ -1833,6 +1976,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -1842,10 +1994,7 @@ +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) - { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; ++{ + struct ssb_sprom *sprom = priv; + + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) @@ -1861,7 +2010,10 @@ +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) -+{ + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; + struct ssb_init_invariants *iv = priv; struct ssb_sprom *sprom = &iv->sprom; struct ssb_boardinfo *bi = &iv->boardinfo; @@ -2090,6 +2242,15 @@ --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, u16 offset) @@ -2201,7 +2362,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg -+ * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * @@ -2805,6 +2966,15 @@ +} --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -14,9 +14,10 @@ #include "ssb_private.h" @@ -2851,34 +3021,36 @@ /** - * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. +- * +- * @sprom: The SPROM data structure to register. + * ssb_arch_register_fallback_sprom - Registers a method providing a + * fallback SPROM if no SPROM is found. * -- * @sprom: The SPROM data structure to register. -+ * @sprom_callback: The callback function. - * - * With this function the architecture implementation may register a fallback - * SPROM data structure. The fallback is only used for PCI based SSB devices, - * where no valid SPROM can be found in the shadow registers. ++ * @sprom_callback: The callback function. + * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. + * With this function the architecture implementation may register a + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -3027,9 +3199,12 @@ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,24 +27,60 @@ struct ssb_sprom { +@@ -25,26 +25,62 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ @@ -3094,11 +3269,20 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +94,14 @@ struct ssb_sprom { +@@ -58,14 +94,23 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; @@ -3111,7 +3295,7 @@ }; -@@ -137,7 +173,7 @@ struct ssb_device { +@@ -137,7 +182,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3120,7 +3304,21 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -208,6 +244,7 @@ enum ssb_bustype { +@@ -195,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -208,6 +252,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3128,7 +3326,7 @@ }; /* board_vendor */ -@@ -238,20 +275,33 @@ struct ssb_bus { +@@ -238,20 +283,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3170,7 +3368,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +310,8 @@ struct ssb_bus { +@@ -260,7 +318,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3180,7 +3378,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +357,11 @@ struct ssb_bus { +@@ -306,6 +365,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3192,7 +3390,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +392,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3217,7 +3415,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -3227,6 +3425,15 @@ extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -53,6 +53,7 @@ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ @@ -3477,7 +3684,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,104 +267,200 @@ +@@ -264,104 +267,257 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -3701,6 +3908,23 @@ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -3732,6 +3956,68 @@ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++ ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ diff --git a/target/linux/generic/patches-2.6.32/025-bcma_backport.patch b/target/linux/generic/patches-2.6.32/025-bcma_backport.patch index 4d73540a09..3571bd1984 100644 --- a/target/linux/generic/patches-2.6.32/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.32/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-y += platform/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warning("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warning("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch index 0dc9bafb5c..a619e6cc6b 100644 --- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch +++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch @@ -1,5 +1,14 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -146,6 +155,15 @@ { --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ case 0x5354: ssb_pmu0_pllinit_r0(cc, crystalfreq); @@ -212,6 +230,15 @@ } --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -12,6 +12,7 @@ #include #include @@ -256,6 +283,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); } @@ -277,6 +313,15 @@ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -356,7 +401,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -469,10 +514,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -494,7 +544,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc +@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -624,7 +674,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); /* Enable interrupts for this device. */ @@ -640,7 +690,7 @@ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); if (err) goto out; -@@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -693,7 +743,23 @@ out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -18,6 +18,7 @@ +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,12 +12,14 @@ + + #include + #include ++#include + #include + #include + #include #include #include #include @@ -701,7 +767,7 @@ #include #include -@@ -140,6 +141,19 @@ static void ssb_device_put(struct ssb_de +@@ -140,6 +142,19 @@ static void ssb_device_put(struct ssb_de put_device(dev->dev); } @@ -721,7 +787,7 @@ static int ssb_device_resume(struct device *dev) { struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -210,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -210,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -776,13 +842,13 @@ - if (!dev->dev || - !dev->dev->driver || - !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) + sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); + if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { + ssb_device_put(sdev); continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) +- continue; - err = drv->suspend(dev, state); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", @@ -864,7 +930,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -380,6 +385,35 @@ static int ssb_device_uevent(struct devi +@@ -380,6 +386,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -900,7 +966,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -389,6 +423,7 @@ static struct bus_type ssb_bustype = { +@@ -389,6 +424,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -908,7 +974,7 @@ }; static void ssb_buses_lock(void) -@@ -481,6 +516,7 @@ static int ssb_devices_register(struct s +@@ -481,6 +517,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -916,7 +982,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -490,13 +526,13 @@ static int ssb_devices_register(struct s +@@ -490,13 +527,13 @@ static int ssb_devices_register(struct s #endif break; case SSB_BUSTYPE_SDIO: @@ -932,7 +998,7 @@ break; } -@@ -523,7 +559,7 @@ error: +@@ -523,7 +560,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -941,7 +1007,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -734,9 +770,9 @@ out: +@@ -734,9 +771,9 @@ out: return err; } @@ -954,7 +1020,7 @@ { int err; -@@ -817,8 +853,8 @@ err_disable_xtal: +@@ -817,8 +854,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -965,7 +1031,7 @@ { int err; -@@ -830,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -830,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -975,7 +1041,7 @@ } return err; -@@ -838,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -838,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -988,7 +1054,7 @@ { int err; -@@ -860,8 +899,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -860,8 +900,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -1000,7 +1066,7 @@ { int err; -@@ -881,9 +921,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -881,9 +922,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1013,7 +1079,7 @@ { int err; -@@ -964,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -964,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1024,7 +1090,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1080,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1080,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1055,7 +1121,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1155,10 +1194,10 @@ void ssb_device_enable(struct ssb_device +@@ -1155,10 +1195,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1069,7 +1135,7 @@ { int i; u32 val; -@@ -1166,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1166,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1078,7 +1144,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1183,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1183,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1126,19 +1192,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1211,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1205,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (dev->bus->host_pci->is_pcie && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1328,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1328,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1163,7 +1253,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1349,6 +1409,37 @@ error: +@@ -1349,6 +1428,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1203,6 +1293,15 @@ u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,6 +17,7 @@ #include @@ -1291,16 +1390,39 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -560,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ +@@ -560,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -572,37 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -572,37 +644,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1359,7 +1481,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -616,15 +662,14 @@ static int sprom_extract(struct ssb_bus +@@ -616,15 +685,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1377,7 +1499,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -644,7 +689,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -644,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1386,7 +1508,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -654,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -654,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1416,7 +1538,7 @@ err = 0; goto out_free; } -@@ -676,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -676,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -1441,7 +1563,14 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c -@@ -12,6 +12,7 @@ +@@ -6,12 +6,13 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. */ #include @@ -1489,6 +1618,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -1498,10 +1636,7 @@ +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) - { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; ++{ + struct ssb_sprom *sprom = priv; + + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) @@ -1517,7 +1652,10 @@ +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) -+{ + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; + struct ssb_init_invariants *iv = priv; struct ssb_sprom *sprom = &iv->sprom; struct ssb_boardinfo *bi = &iv->boardinfo; @@ -1746,6 +1884,15 @@ --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -260,7 +260,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -1796,6 +1943,15 @@ } --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -14,9 +14,10 @@ #include "ssb_private.h" @@ -1842,34 +1998,36 @@ /** - * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. +- * +- * @sprom: The SPROM data structure to register. + * ssb_arch_register_fallback_sprom - Registers a method providing a + * fallback SPROM if no SPROM is found. * -- * @sprom: The SPROM data structure to register. -+ * @sprom_callback: The callback function. - * - * With this function the architecture implementation may register a fallback - * SPROM data structure. The fallback is only used for PCI based SSB devices, - * where no valid SPROM can be found in the shadow registers. ++ * @sprom_callback: The callback function. + * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. + * With this function the architecture implementation may register a + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -1957,9 +2115,12 @@ #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ @@ -1977,7 +2138,23 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -95,7 +101,7 @@ struct ssb_sprom { +@@ -88,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -95,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -1986,7 +2163,7 @@ }; -@@ -167,7 +173,7 @@ struct ssb_device { +@@ -167,7 +182,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -1995,7 +2172,21 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -269,7 +275,8 @@ struct ssb_bus { +@@ -225,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -269,7 +283,8 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -2005,7 +2196,7 @@ struct ssb_device *mapped_device; union { /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -@@ -281,14 +288,17 @@ struct ssb_bus { +@@ -281,14 +296,17 @@ struct ssb_bus { * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; @@ -2030,7 +2221,7 @@ /* See enum ssb_quirks */ unsigned int quirks; -@@ -300,7 +310,7 @@ struct ssb_bus { +@@ -300,7 +318,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -2039,7 +2230,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -396,7 +406,9 @@ extern bool ssb_is_sprom_available(struc +@@ -396,7 +414,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -2050,7 +2241,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -667,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -667,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -2416,7 +2607,7 @@ #define SSB_SPROM8_RSSISMF5G 0x000F #define SSB_SPROM8_RSSISMC5G 0x00F0 #define SSB_SPROM8_RSSISMC5G_SHIFT 4 -@@ -374,47 +420,47 @@ +@@ -374,47 +420,104 @@ #define SSB_SPROM8_RSSISAV5G_SHIFT 8 #define SSB_SPROM8_BXA5G 0x1800 #define SSB_SPROM8_BXA5G_SHIFT 11 @@ -2436,6 +2627,23 @@ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -2484,11 +2692,60 @@ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++ ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -2521,3 +2778,53 @@ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * diff --git a/target/linux/generic/patches-2.6.36/025-bcma_backport.patch b/target/linux/generic/patches-2.6.36/025-bcma_backport.patch index 45da134a41..eb64b85826 100644 --- a/target/linux/generic/patches-2.6.36/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.36/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-$(CONFIG_STAGING) += staging/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.36/941-ssb_update.patch b/target/linux/generic/patches-2.6.36/941-ssb_update.patch index f83923102d..e634a4a46c 100644 --- a/target/linux/generic/patches-2.6.36/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.36/941-ssb_update.patch @@ -1,6 +1,23 @@ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -384,6 +384,35 @@ static int ssb_device_uevent(struct devi +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -384,6 +385,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -36,7 +53,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -393,6 +422,7 @@ static struct bus_type ssb_bustype = { +@@ -393,6 +423,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -44,7 +61,7 @@ }; static void ssb_buses_lock(void) -@@ -528,7 +558,7 @@ error: +@@ -528,7 +559,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -53,7 +70,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -739,9 +769,9 @@ out: +@@ -739,9 +770,9 @@ out: return err; } @@ -66,7 +83,7 @@ { int err; -@@ -822,8 +852,8 @@ err_disable_xtal: +@@ -822,8 +853,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -77,7 +94,7 @@ { int err; -@@ -846,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -846,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -90,7 +107,7 @@ { int err; -@@ -868,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -868,8 +899,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -102,7 +119,7 @@ { int err; -@@ -889,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -889,9 +921,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -115,7 +132,7 @@ { int err; -@@ -972,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -972,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -126,7 +143,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1088,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1088,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -157,7 +174,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1163,10 +1193,10 @@ void ssb_device_enable(struct ssb_device +@@ -1163,10 +1194,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -171,7 +188,7 @@ { int i; u32 val; -@@ -1174,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1174,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -180,7 +197,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1191,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1191,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -228,19 +245,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1219,7 +1267,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1213,13 +1262,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1262,20 +1313,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1262,20 +1332,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -265,7 +306,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1283,6 +1334,37 @@ error: +@@ -1283,6 +1353,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -305,6 +346,15 @@ u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss out->antenna_gain.ghz5.a3 = gain; } @@ -376,16 +426,39 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -561,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ +@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -573,37 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -444,7 +517,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +662,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -462,7 +535,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +689,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -471,7 +544,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -501,7 +574,7 @@ err = 0; goto out_free; } -@@ -677,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -526,6 +599,15 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -53,12 +53,13 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -566,6 +648,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -259,7 +259,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -620,9 +711,12 @@ } --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ @@ -640,7 +734,23 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -95,7 +101,7 @@ struct ssb_sprom { +@@ -88,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -95,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -649,7 +759,21 @@ }; -@@ -304,7 +310,7 @@ struct ssb_bus { +@@ -225,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -304,7 +318,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -658,7 +782,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +406,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -669,7 +793,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +522,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -792,8 +916,88 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +@@ -386,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -416,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -894,6 +1098,15 @@ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; @@ -913,6 +1126,15 @@ * min_msk = 0xCBB --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } @@ -949,6 +1171,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -979,7 +1210,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -403,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -1092,10 +1323,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -1117,7 +1353,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc +@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -1155,7 +1391,7 @@ u32 v; int i; -@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s +@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); @@ -1247,7 +1483,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -1300,6 +1536,15 @@ out: --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,7 +17,7 @@ #include @@ -1327,21 +1572,23 @@ + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. +- * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -1393,6 +1640,15 @@ /* core.c */ --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -1425,3 +1681,75 @@ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * diff --git a/target/linux/generic/patches-2.6.37/020-ssb_update.patch b/target/linux/generic/patches-2.6.37/020-ssb_update.patch index 82872c78ad..b71b67598e 100644 --- a/target/linux/generic/patches-2.6.37/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.37/020-ssb_update.patch @@ -1,6 +1,23 @@ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -383,6 +383,35 @@ static int ssb_device_uevent(struct devi +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -383,6 +384,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -36,7 +53,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -392,6 +421,7 @@ static struct bus_type ssb_bustype = { +@@ -392,6 +422,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -44,7 +61,7 @@ }; static void ssb_buses_lock(void) -@@ -527,7 +557,7 @@ error: +@@ -527,7 +558,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -53,7 +70,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -738,9 +768,9 @@ out: +@@ -738,9 +769,9 @@ out: return err; } @@ -66,7 +83,7 @@ { int err; -@@ -821,8 +851,8 @@ err_disable_xtal: +@@ -821,8 +852,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -77,7 +94,7 @@ { int err; -@@ -845,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -845,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -90,7 +107,7 @@ { int err; -@@ -867,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -867,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -102,7 +119,7 @@ { int err; -@@ -888,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -888,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -115,7 +132,7 @@ { int err; -@@ -971,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -971,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -126,7 +143,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1087,23 +1118,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1087,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -157,7 +174,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1162,10 +1192,10 @@ void ssb_device_enable(struct ssb_device +@@ -1162,10 +1193,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -171,7 +188,7 @@ { int i; u32 val; -@@ -1173,7 +1203,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1173,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -180,7 +197,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1190,20 +1220,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1190,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -228,19 +245,43 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1218,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1212,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1261,20 +1312,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1261,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -265,7 +306,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1282,6 +1333,37 @@ error: +@@ -1282,6 +1352,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -305,6 +346,15 @@ u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss out->antenna_gain.ghz5.a3 = gain; } @@ -376,16 +426,39 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -561,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ +@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ } -@@ -573,37 +621,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -444,7 +517,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +662,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -462,7 +535,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +689,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -471,7 +544,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -501,7 +574,7 @@ err = 0; goto out_free; } -@@ -677,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -526,6 +599,15 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -53,12 +53,13 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -566,6 +648,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -620,9 +711,12 @@ } --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ @@ -640,7 +734,23 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -95,7 +101,7 @@ struct ssb_sprom { +@@ -88,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -95,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -649,7 +759,21 @@ }; -@@ -304,7 +310,7 @@ struct ssb_bus { +@@ -225,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -304,7 +318,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -658,7 +782,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +406,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -669,7 +793,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +522,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -764,8 +888,88 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +@@ -387,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -417,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -866,6 +1070,15 @@ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; @@ -885,6 +1098,15 @@ * min_msk = 0xCBB --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } @@ -921,6 +1143,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -951,7 +1182,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -403,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -1064,10 +1295,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -1089,7 +1325,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc +@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -1127,7 +1363,7 @@ u32 v; int i; -@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s +@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); @@ -1219,7 +1455,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -1272,6 +1508,15 @@ out: --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,7 +17,7 @@ #include @@ -1299,21 +1544,23 @@ + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. +- * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -1365,6 +1612,15 @@ /* core.c */ --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -1397,3 +1653,75 @@ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * diff --git a/target/linux/generic/patches-2.6.37/025-bcma_backport.patch b/target/linux/generic/patches-2.6.37/025-bcma_backport.patch index 1b5da3b010..c3312a2004 100644 --- a/target/linux/generic/patches-2.6.37/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.37/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-$(CONFIG_STAGING) += staging/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.38/020-ssb_update.patch b/target/linux/generic/patches-2.6.38/020-ssb_update.patch index 3db961367b..a72a39b8ba 100644 --- a/target/linux/generic/patches-2.6.38/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.38/020-ssb_update.patch @@ -1,6 +1,136 @@ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -1192,10 +1192,10 @@ void ssb_device_enable(struct ssb_device +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -557,7 +558,7 @@ error: + } + + /* Needs ssb_buses_lock() */ +-static int ssb_attach_queued_buses(void) ++static int __devinit ssb_attach_queued_buses(void) + { + struct ssb_bus *bus, *n; + int err = 0; +@@ -768,9 +769,9 @@ out: + return err; + } + +-static int ssb_bus_register(struct ssb_bus *bus, +- ssb_invariants_func_t get_invariants, +- unsigned long baseaddr) ++static int __devinit ssb_bus_register(struct ssb_bus *bus, ++ ssb_invariants_func_t get_invariants, ++ unsigned long baseaddr) + { + int err; + +@@ -851,8 +852,8 @@ err_disable_xtal: + } + + #ifdef CONFIG_SSB_PCIHOST +-int ssb_bus_pcibus_register(struct ssb_bus *bus, +- struct pci_dev *host_pci) ++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, ++ struct pci_dev *host_pci) + { + int err; + +@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); + #endif /* CONFIG_SSB_PCIHOST */ + + #ifdef CONFIG_SSB_PCMCIAHOST +-int ssb_bus_pcmciabus_register(struct ssb_bus *bus, +- struct pcmcia_device *pcmcia_dev, +- unsigned long baseaddr) ++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, ++ struct pcmcia_device *pcmcia_dev, ++ unsigned long baseaddr) + { + int err; + +@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register + #endif /* CONFIG_SSB_PCMCIAHOST */ + + #ifdef CONFIG_SSB_SDIOHOST +-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, +- unsigned int quirks) ++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *func, ++ unsigned int quirks) + { + int err; + +@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ + EXPORT_SYMBOL(ssb_bus_sdiobus_register); + #endif /* CONFIG_SSB_PCMCIAHOST */ + +-int ssb_bus_ssbbus_register(struct ssb_bus *bus, +- unsigned long baseaddr, +- ssb_invariants_func_t get_invariants) ++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, ++ unsigned long baseaddr, ++ ssb_invariants_func_t get_invariants) + { + int err; + +@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) +- return SSB_CHIPCO_CLK_T6_M0; +- return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M0; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ +@@ -1117,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str + { + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + +- /* The REJECT bit changed position in TMSLOW between +- * Backplane revisions. */ ++ /* The REJECT bit seems to be different for Backplane rev 2.3 */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: +- return SSB_TMSLOW_REJECT_22; ++ case SSB_IDLOW_SSBREV_24: ++ case SSB_IDLOW_SSBREV_26: ++ return SSB_TMSLOW_REJECT; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; +- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ +- case SSB_IDLOW_SSBREV_25: /* same here */ +- case SSB_IDLOW_SSBREV_26: /* same here */ ++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ + case SSB_IDLOW_SSBREV_27: /* same here */ +- return SSB_TMSLOW_REJECT_23; /* this is a guess */ ++ return SSB_TMSLOW_REJECT; /* this is a guess */ + default: + printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + WARN_ON(1); + } +- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); ++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); + } + + int ssb_device_is_enabled(struct ssb_device *dev) +@@ -1192,10 +1193,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -14,7 +144,7 @@ { int i; u32 val; -@@ -1203,7 +1203,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1203,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -23,7 +153,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1220,20 +1220,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1220,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -71,8 +201,116 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | +@@ -1242,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: +- return SSB_PCI_DMA; ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { ++ return SSB_PCIE_DMA_H32; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } + default: + __ssb_dma_not_implemented(dev); + } +@@ -1291,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); + + int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) + { +- struct ssb_chipcommon *cc; + int err; + enum ssb_clkmode mode; + + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; +- cc = &bus->chipco; +- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; +- ssb_chipco_set_clockmode(cc, mode); + + #ifdef CONFIG_SSB_DEBUG + bus->powered_up = 1; + #endif ++ ++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; ++ ssb_chipco_set_clockmode(&bus->chipco, mode); ++ + return 0; + error: + ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); +@@ -1312,6 +1352,37 @@ error: + } + EXPORT_SYMBOL(ssb_bus_powerup); + ++static void ssb_broadcast_value(struct ssb_device *dev, ++ u32 address, u32 data) ++{ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ /* This is used for both, PCI and ChipCommon core, so be careful. */ ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++#endif ++ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ ++} ++ ++void ssb_commit_settings(struct ssb_bus *bus) ++{ ++ struct ssb_device *dev; ++ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; ++#else ++ dev = bus->chipco.dev; ++#endif ++ if (WARN_ON(!dev)) ++ return; ++ /* This forces an update of the cached registers. */ ++ ssb_broadcast_value(dev, 0xFD8, 0); ++} ++EXPORT_SYMBOL(ssb_commit_settings); ++ + u32 ssb_admatch_base(u32 adm) + { + u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -468,10 +468,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); @@ -88,7 +326,37 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -641,7 +645,7 @@ static int sprom_extract(struct ssb_bus +@@ -603,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + + /* TODO - get remaining rev 8 stuff needed */ +@@ -641,7 +668,7 @@ static int sprom_extract(struct ssb_bus break; default: ssb_printk(KERN_WARNING PFX "Unsupported SPROM" @@ -97,6 +365,61 @@ " v1\n", out->revision); out->revision = 1; sprom_extract_r123(out, in); +@@ -658,7 +685,6 @@ static int sprom_extract(struct ssb_bus + static int ssb_pci_sprom_get(struct ssb_bus *bus, + struct ssb_sprom *sprom) + { +- const struct ssb_sprom *fallback; + int err; + u16 *buf; + +@@ -666,7 +692,7 @@ static int ssb_pci_sprom_get(struct ssb_ + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } +- if (bus->chipco.dev) { /* can be unavailible! */ ++ if (bus->chipco.dev) { /* can be unavailable! */ + /* + * get SPROM offset: SSB_SPROM_BASE1 except for + * chipcommon rev >= 31 or chip ID is 0x4312 and +@@ -703,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_ + if (err) { + /* All CRC attempts failed. + * Maybe there is no SPROM on the device? +- * If we have a fallback, use that. */ +- fallback = ssb_get_fallback_sprom(); +- if (fallback) { +- memcpy(sprom, fallback, sizeof(*sprom)); ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage */ ++ err = ssb_fill_sprom_with_fallback(bus, sprom); ++ if (err) { ++ ssb_printk(KERN_WARNING PFX "WARNING: Using" ++ " fallback SPROM failed (err %d)\n", ++ err); ++ } else { ++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM" ++ " revision %d provided by" ++ " platform.\n", sprom->revision); + err = 0; + goto out_free; + } +@@ -724,12 +757,9 @@ out_free: + static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) + { +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, +- &bi->vendor); +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, +- &bi->type); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bi->rev); ++ bi->vendor = bus->host_pci->subsystem_vendor; ++ bi->type = bus->host_pci->subsystem_device; ++ bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -85,6 +85,8 @@ @@ -108,9 +431,12 @@ #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ -@@ -97,7 +99,6 @@ +@@ -95,9 +97,8 @@ + #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ + #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ - #define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ +-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ ++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ -#define SSB_TMSLOW_PHYCLK 0x00000010 /* MAC PHY Clock Control Enable */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ @@ -134,11 +460,89 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ -diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c -index 7c031fd..06d15b6 100644 +@@ -427,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -457,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; bus = ccdev->bus; @@ -223,7 +627,7 @@ index 7c031fd..06d15b6 100644 break; default: SSB_WARN_ON(1); -@@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) +@@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip if (cc->dev->id.revision >= 11) cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); @@ -236,11 +640,18 @@ index 7c031fd..06d15b6 100644 ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); -diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c -index 5732bb2..a7aef47 100644 --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. +@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -257,12 +668,19 @@ index 5732bb2..a7aef47 100644 case 0x4322: /* We keep the default settings: * min_msk = 0xCBB -diff --git a/drivers/ssb/driver_gige.c b/drivers/ssb/driver_gige.c -index 5ba92a2..d758909 100644 --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c -@@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige *dev, - gige_write32(dev, SSB_GIGE_PCICFG + offset, value); +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige + gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } -static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, @@ -273,7 +691,7 @@ index 5ba92a2..d758909 100644 { struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); unsigned long flags; -@@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, +@@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(stru return PCIBIOS_SUCCESSFUL; } @@ -285,7 +703,7 @@ index 5ba92a2..d758909 100644 { struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); unsigned long flags; -@@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, +@@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(str return PCIBIOS_SUCCESSFUL; } @@ -295,10 +713,17 @@ index 5ba92a2..d758909 100644 { struct ssb_gige *dev; u32 base, tmslow, tmshigh; -diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c -index 0e8d352..11d85bf 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -311,7 +736,7 @@ index 0e8d352..11d85bf 100644 static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) -@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -320,7 +745,7 @@ index 0e8d352..11d85bf 100644 { u32 val; -@@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) +@@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st register_pci_controller(&ssb_pcicore_controller); } @@ -329,7 +754,7 @@ index 0e8d352..11d85bf 100644 { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -403,25 +408,133 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) +@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -442,10 +867,15 @@ index 0e8d352..11d85bf 100644 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -467,7 +897,7 @@ index 0e8d352..11d85bf 100644 if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data) +@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -505,7 +935,7 @@ index 0e8d352..11d85bf 100644 u32 v; int i; -@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, +@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); @@ -549,35 +979,34 @@ index 0e8d352..11d85bf 100644 - /* This is used for both, PCI and ChipCommon core, so be careful. */ - BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); - BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); -- -- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); -- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ -- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); -- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ --} + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; --static void ssb_commit_settings(struct ssb_bus *bus) --{ -- struct ssb_device *dev; +- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); +- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ +- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); +- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +-} + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); +-static void ssb_commit_settings(struct ssb_bus *bus) +-{ +- struct ssb_device *dev; ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } + - dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; - if (WARN_ON(!dev)) - return; - /* This forces an update of the cached registers. */ - ssb_broadcast_value(dev, 0xFD8, 0); -+ if (pc->dev->id.revision >= 10) { -+ max_retries = 200; -+ ssb_pcie_mdio_set_phy(pc, device); -+ } -+ + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ @@ -598,7 +1027,7 @@ index 0e8d352..11d85bf 100644 } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, +@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -649,262 +1078,18 @@ index 0e8d352..11d85bf 100644 } pc->setup_done = 1; out: -diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c -index e05ba6e..6ec6e09 100644 ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -557,7 +557,7 @@ error: - } - - /* Needs ssb_buses_lock() */ --static int ssb_attach_queued_buses(void) -+static int __devinit ssb_attach_queued_buses(void) - { - struct ssb_bus *bus, *n; - int err = 0; -@@ -768,9 +768,9 @@ out: - return err; - } - --static int ssb_bus_register(struct ssb_bus *bus, -- ssb_invariants_func_t get_invariants, -- unsigned long baseaddr) -+static int __devinit ssb_bus_register(struct ssb_bus *bus, -+ ssb_invariants_func_t get_invariants, -+ unsigned long baseaddr) - { - int err; - -@@ -851,8 +851,8 @@ err_disable_xtal: - } - - #ifdef CONFIG_SSB_PCIHOST --int ssb_bus_pcibus_register(struct ssb_bus *bus, -- struct pci_dev *host_pci) -+int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, -+ struct pci_dev *host_pci) - { - int err; - -@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); - #endif /* CONFIG_SSB_PCIHOST */ - - #ifdef CONFIG_SSB_PCMCIAHOST --int ssb_bus_pcmciabus_register(struct ssb_bus *bus, -- struct pcmcia_device *pcmcia_dev, -- unsigned long baseaddr) -+int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, -+ struct pcmcia_device *pcmcia_dev, -+ unsigned long baseaddr) - { - int err; - -@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register); - #endif /* CONFIG_SSB_PCMCIAHOST */ - - #ifdef CONFIG_SSB_SDIOHOST --int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, -- unsigned int quirks) -+int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, -+ struct sdio_func *func, -+ unsigned int quirks) - { - int err; - -@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, - EXPORT_SYMBOL(ssb_bus_sdiobus_register); - #endif /* CONFIG_SSB_PCMCIAHOST */ - --int ssb_bus_ssbbus_register(struct ssb_bus *bus, -- unsigned long baseaddr, -- ssb_invariants_func_t get_invariants) -+int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, -+ unsigned long baseaddr, -+ ssb_invariants_func_t get_invariants) - { - int err; - -@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) - switch (plltype) { - case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ - if (m & SSB_CHIPCO_CLK_T6_MMASK) -- return SSB_CHIPCO_CLK_T6_M0; -- return SSB_CHIPCO_CLK_T6_M1; -+ return SSB_CHIPCO_CLK_T6_M1; -+ return SSB_CHIPCO_CLK_T6_M0; - case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ - case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ - case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1117,23 +1118,22 @@ static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) - { - u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; - -- /* The REJECT bit changed position in TMSLOW between -- * Backplane revisions. */ -+ /* The REJECT bit seems to be different for Backplane rev 2.3 */ - switch (rev) { - case SSB_IDLOW_SSBREV_22: -- return SSB_TMSLOW_REJECT_22; -+ case SSB_IDLOW_SSBREV_24: -+ case SSB_IDLOW_SSBREV_26: -+ return SSB_TMSLOW_REJECT; - case SSB_IDLOW_SSBREV_23: - return SSB_TMSLOW_REJECT_23; -- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ -- case SSB_IDLOW_SSBREV_25: /* same here */ -- case SSB_IDLOW_SSBREV_26: /* same here */ -+ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ - case SSB_IDLOW_SSBREV_27: /* same here */ -- return SSB_TMSLOW_REJECT_23; /* this is a guess */ -+ return SSB_TMSLOW_REJECT; /* this is a guess */ - default: - printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); - WARN_ON(1); - } -- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); -+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); - } - - int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1266,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_device *dev) - case SSB_BUSTYPE_SSB: - return 0; - case SSB_BUSTYPE_PCI: -- return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) -+ return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; - default: - __ssb_dma_not_implemented(dev); - } -@@ -1309,20 +1312,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); - - int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) - { -- struct ssb_chipcommon *cc; - int err; - enum ssb_clkmode mode; - - err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); - if (err) - goto error; -- cc = &bus->chipco; -- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; -- ssb_chipco_set_clockmode(cc, mode); - - #ifdef CONFIG_SSB_DEBUG - bus->powered_up = 1; - #endif -+ -+ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; -+ ssb_chipco_set_clockmode(&bus->chipco, mode); -+ - return 0; - error: - ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1330,6 +1333,37 @@ error: - } - EXPORT_SYMBOL(ssb_bus_powerup); - -+static void ssb_broadcast_value(struct ssb_device *dev, -+ u32 address, u32 data) -+{ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ /* This is used for both, PCI and ChipCommon core, so be careful. */ -+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); -+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); -+#endif -+ -+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); -+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ -+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); -+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ -+} -+ -+void ssb_commit_settings(struct ssb_bus *bus) -+{ -+ struct ssb_device *dev; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; -+#else -+ dev = bus->chipco.dev; -+#endif -+ if (WARN_ON(!dev)) -+ return; -+ /* This forces an update of the cached registers. */ -+ ssb_broadcast_value(dev, 0xFD8, 0); -+} -+EXPORT_SYMBOL(ssb_commit_settings); -+ - u32 ssb_admatch_base(u32 adm) - { - u32 base = 0; -diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c -index a467b20..a00b35f 100644 ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, - static int ssb_pci_sprom_get(struct ssb_bus *bus, - struct ssb_sprom *sprom) - { -- const struct ssb_sprom *fallback; - int err; - u16 *buf; - -@@ -670,7 +669,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, - ssb_printk(KERN_ERR PFX "No SPROM available!\n"); - return -ENODEV; - } -- if (bus->chipco.dev) { /* can be unavailible! */ -+ if (bus->chipco.dev) { /* can be unavailable! */ - /* - * get SPROM offset: SSB_SPROM_BASE1 except for - * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, - if (err) { - /* All CRC attempts failed. - * Maybe there is no SPROM on the device? -- * If we have a fallback, use that. */ -- fallback = ssb_get_fallback_sprom(); -- if (fallback) { -- memcpy(sprom, fallback, sizeof(*sprom)); -+ * Now we ask the arch code if there is some sprom -+ * available for this device in some other storage */ -+ err = ssb_fill_sprom_with_fallback(bus, sprom); -+ if (err) { -+ ssb_printk(KERN_WARNING PFX "WARNING: Using" -+ " fallback SPROM failed (err %d)\n", -+ err); -+ } else { -+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM" -+ " revision %d provided by" -+ " platform.\n", sprom->revision); - err = 0; - goto out_free; - } -@@ -728,12 +734,9 @@ out_free: - static void ssb_pci_get_boardinfo(struct ssb_bus *bus, - struct ssb_boardinfo *bi) - { -- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, -- &bi->vendor); -- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, -- &bi->type); -- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, -- &bi->rev); -+ bi->vendor = bus->host_pci->subsystem_vendor; -+ bi->type = bus->host_pci->subsystem_device; -+ bi->rev = bus->host_pci->revision; - } - - int ssb_pci_get_invariants(struct ssb_bus *bus, -diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c -index f6c8c81..d7a9813 100644 --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c -@@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci_dev *dev) +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -915,7 +1100,7 @@ index f6c8c81..d7a9813 100644 { struct ssb_bus *ssb; int err = -ENOMEM; -@@ -110,7 +110,7 @@ static void ssb_pcihost_remove(struct pci_dev *dev) +@@ -110,7 +110,7 @@ static void ssb_pcihost_remove(struct pc pci_set_drvdata(dev, NULL); } @@ -924,11 +1109,18 @@ index f6c8c81..d7a9813 100644 { driver->probe = ssb_pcihost_probe; driver->remove = ssb_pcihost_remove; -diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c -index 29884c0..8047f9a 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c -@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cores(struct ssb_bus *bus) +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && @@ -950,10 +1142,17 @@ index 29884c0..8047f9a 100644 bus->chip_package = 0; } else { bus->chip_id = 0x4710; -diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c -index 4f7cc8d..45ff0e3 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,7 +17,7 @@ #include @@ -981,21 +1180,23 @@ index 4f7cc8d..45ff0e3 100644 + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. +- * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -1024,7 +1225,7 @@ index 4f7cc8d..45ff0e3 100644 } /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ -@@ -185,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_bus *bus) +@@ -185,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_b /* this routine differs from specs as we do not access SPROM directly on PCMCIA */ if (bus->bustype == SSB_BUSTYPE_PCI && @@ -1033,11 +1234,9 @@ index 4f7cc8d..45ff0e3 100644 bus->chipco.dev->id.revision >= 31) return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; -diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h -index 0331139..7765301 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h -@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus, +@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_ const char *buf, size_t count, int (*sprom_check_crc)(const u16 *sprom, size_t size), int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); @@ -1047,20 +1246,37 @@ index 0331139..7765301 100644 /* core.c */ -diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h -index 9659eff..8623217 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -99,7 +101,7 @@ struct ssb_sprom { +@@ -92,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -99,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -1069,7 +1285,21 @@ index 9659eff..8623217 100644 }; -@@ -308,7 +310,7 @@ struct ssb_bus { +@@ -229,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -308,7 +318,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1078,7 +1308,7 @@ index 9659eff..8623217 100644 u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +406,9 @@ extern bool ssb_is_sprom_available(struct ssb_bus *bus); +@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1089,7 +1319,7 @@ index 9659eff..8623217 100644 /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +522,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus); +@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1097,10 +1327,17 @@ index 9659eff..8623217 100644 /* Various helper functions */ extern u32 ssb_admatch_base(u32 adm); -diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h -index 2cdf249..a08d693 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -1133,16 +1370,75 @@ index 2cdf249..a08d693 100644 #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 -diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h -index 402955a..efbf459 100644 ---- a/include/linux/ssb/ssb_regs.h -+++ b/include/linux/ssb/ssb_regs.h -@@ -97,7 +97,7 @@ - #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ - #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ - #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ --#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ -+#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ - #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ - #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ - #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * diff --git a/target/linux/generic/patches-2.6.38/025-bcma_backport.patch b/target/linux/generic/patches-2.6.38/025-bcma_backport.patch index b36bb5f8e1..60fefaf452 100644 --- a/target/linux/generic/patches-2.6.38/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.38/025-bcma_backport.patch @@ -34,7 +34,7 @@ + belongs to. See include/linux/bcma/bcma.h for possible values. --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -5832,6 +5832,13 @@ S: Maintained +@@ -5791,6 +5791,13 @@ S: Maintained F: drivers/ssb/ F: include/linux/ssb/ @@ -71,7 +71,7 @@ obj-$(CONFIG_STAGING) += staging/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch index f566288375..be7071b93f 100644 --- a/target/linux/generic/patches-2.6.39/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch @@ -1,5 +1,14 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb if (!ccdev) return; @@ -100,6 +109,15 @@ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; @@ -119,6 +137,15 @@ * min_msk = 0xCBB --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } @@ -155,6 +182,15 @@ u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -15,6 +15,11 @@ #include "ssb_private.h" @@ -185,7 +221,7 @@ { struct ssb_bus *bus = pc->dev->bus; u16 chipid_top; -@@ -403,25 +408,133 @@ static int pcicore_is_in_hostmode(struct +@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct } #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ @@ -298,10 +334,15 @@ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -+ ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ - ssb_write32(pc->dev, SSB_INTVEC, 0); +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { @@ -323,7 +364,7 @@ if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); -@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc +@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc pcicore_write32(pc, 0x134, data); } @@ -361,7 +402,7 @@ u32 v; int i; -@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s +@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s v |= 0x2; /* MDIO Clock Divisor */ pcicore_write32(pc, mdio_control, v); @@ -453,7 +494,7 @@ } int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, -@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc if (pc->setup_done) goto out; if (pdev->id.coreid == SSB_DEV_PCI) { @@ -506,7 +547,24 @@ out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -557,7 +557,7 @@ error: +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -557,7 +558,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -515,7 +573,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -768,9 +768,9 @@ out: +@@ -768,9 +769,9 @@ out: return err; } @@ -528,7 +586,7 @@ { int err; -@@ -851,8 +851,8 @@ err_disable_xtal: +@@ -851,8 +852,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -539,7 +597,7 @@ { int err; -@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -552,7 +610,7 @@ { int err; -@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -564,7 +622,7 @@ { int err; -@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -577,7 +635,7 @@ { int err; -@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -588,7 +646,7 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1117,23 +1118,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1117,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -619,19 +677,43 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1266,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1260,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } -@@ -1309,20 +1312,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1309,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -656,7 +738,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1330,6 +1333,37 @@ error: +@@ -1330,6 +1352,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -696,7 +778,46 @@ u32 base = 0; --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + + /* TODO - get remaining rev 8 stuff needed */ +@@ -662,7 +685,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -704,7 +825,7 @@ int err; u16 *buf; -@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -707,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -726,7 +847,7 @@ err = 0; goto out_free; } -@@ -728,12 +734,9 @@ out_free: +@@ -728,12 +757,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -744,6 +865,15 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -766,6 +896,15 @@ driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor #ifdef CONFIG_SSB_PCIHOST if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -790,6 +929,15 @@ bus->chip_id = 0x4710; --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -17,7 +17,7 @@ #include @@ -817,21 +965,23 @@ + * callback handler which fills the SPROM data structure. The fallback is + * only used for PCI based SSB devices, where no valid SPROM can be found + * in the shadow registers. - * -- * This function is useful for weird architectures that have a half-assed SSB device -- * hardwired to their PCI bus. ++ * + * This function is useful for weird architectures that have a half-assed + * SSB device hardwired to their PCI bus. - * -- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently -- * don't use this fallback. -- * Architectures must provide the SPROM for native SSB devices anyway, -- * so the fallback also isn't used for native devices. ++ * + * Note that it does only work with PCI attached SSB devices. PCMCIA + * devices currently don't use this fallback. + * Architectures must provide the SPROM for native SSB devices anyway, so + * the fallback also isn't used for native devices. * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. +- * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * - * This function is available for architecture code, only. So it is not exported. + * This function is available for architecture code, only. So it is not + * exported. @@ -874,16 +1024,35 @@ /* core.c */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -99,7 +101,7 @@ struct ssb_sprom { +@@ -92,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -99,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -892,7 +1061,21 @@ }; -@@ -308,7 +310,7 @@ struct ssb_bus { +@@ -229,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -308,7 +318,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -901,7 +1084,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +406,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -912,7 +1095,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +522,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -922,6 +1105,15 @@ extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 @@ -965,3 +1157,146 @@ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +@@ -432,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -462,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * diff --git a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch index b36bb5f8e1..fa77868783 100644 --- a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch @@ -71,7 +71,7 @@ obj-$(CONFIG_STAGING) += staging/ --- /dev/null +++ b/drivers/bcma/Kconfig -@@ -0,0 +1,44 @@ +@@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA @@ -107,6 +107,19 @@ + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA @@ -118,12 +131,14 @@ +endmenu --- /dev/null +++ b/drivers/bcma/Makefile -@@ -0,0 +1,8 @@ +@@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG @@ -157,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,35 @@ +@@ -0,0 +1,54 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -175,13 +190,32 @@ +/* main.c */ +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); @@ -195,7 +229,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,124 @@ +@@ -0,0 +1,126 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -308,6 +342,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -322,13 +358,13 @@ +EXPORT_SYMBOL(bcma_core_dma_translation); --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c -@@ -0,0 +1,103 @@ +@@ -0,0 +1,156 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -351,6 +387,9 @@ + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -377,6 +416,8 @@ + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ @@ -426,14 +467,62 @@ +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,138 @@ +@@ -0,0 +1,309 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * -+ * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -442,20 +531,47 @@ +#include "bcma_private.h" +#include + -+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, -+ u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ -+ u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); -+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); -+ value &= mask; -+ value |= set; -+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); -+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ @@ -514,6 +630,24 @@ + } +} + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; @@ -523,7 +657,7 @@ + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: -+ pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { @@ -567,15 +701,141 @@ + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,223 @@ +@@ -0,0 +1,237 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -744,8 +1004,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -759,6 +1021,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -768,6 +1033,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -775,7 +1042,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -795,7 +1069,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,251 @@ +@@ -0,0 +1,299 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -807,6 +1081,7 @@ +#include +#include +#include ++#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ @@ -818,48 +1093,58 @@ + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + @@ -1021,6 +1306,41 @@ + pci_set_drvdata(dev, NULL); +} + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, @@ -1036,6 +1356,8 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, +}; + +int __init bcma_host_pci_init(void) @@ -1049,7 +1371,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,257 @@ +@@ -0,0 +1,354 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1058,6 +1380,7 @@ + */ + +#include "bcma_private.h" ++#include +#include +#include + @@ -1067,6 +1390,7 @@ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ @@ -1101,6 +1425,7 @@ + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + @@ -1118,6 +1443,10 @@ +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); +} + @@ -1132,6 +1461,7 @@ + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + @@ -1145,7 +1475,10 @@ + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; -+ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } @@ -1192,6 +1525,13 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { @@ -1221,6 +1561,75 @@ + bcma_unregister_cores(bus); +} + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; @@ -1279,6 +1688,16 @@ + return 0; +} + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ +static int __init bcma_modinit(void) +{ + int err; @@ -1309,7 +1728,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,360 @@ +@@ -0,0 +1,486 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1512,18 +1931,162 @@ + return addrl; +} + -+int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) +{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} + ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; -+ u8 i, j; + -+ int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; @@ -1534,9 +2097,27 @@ + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); -+ eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1548,127 +2129,91 @@ + INIT_LIST_HEAD(&core->list); + core->bus = bus; + -+ /* get CIs */ -+ cia = bcma_erom_get_ci(bus, &eromptr); -+ if (cia < 0) { -+ bcma_erom_push_ent(&eromptr); -+ if (bcma_erom_is_end(bus, &eromptr)) -+ break; -+ err= -EILSEQ; -+ goto out; -+ } -+ cib = bcma_erom_get_ci(bus, &eromptr); -+ if (cib < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ -+ /* parse CIs */ -+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; -+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; -+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; -+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; -+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; -+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; -+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; -+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; -+ -+ if (((core->id.manuf == BCMA_MANUF_ARM) && -+ (core->id.id == 0xFFF)) || -+ (ports[1] == 0)) { -+ bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; -+ } -+ -+ /* check if component is a core at all */ -+ if (wrappers[0] + wrappers[1] == 0) { -+ /* we could save addrl of the router -+ if (cid == BCMA_CORE_OOB_ROUTER) -+ */ -+ bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; -+ } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + -+ if (bcma_erom_is_bridge(bus, &eromptr)) { -+ bcma_erom_skip_component(bus, &eromptr); -+ continue; -+ } ++ core->core_index = core_num++; ++ bus->nr_cores++; + -+ /* get & parse master ports */ -+ for (i = 0; i < ports[0]; i++) { -+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); -+ if (mst_port_d < 0) { -+ err= -EILSEQ; -+ goto out; -+ } -+ } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + -+ /* get & parse slave ports */ -+ for (i = 0; i < ports[1]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SLAVE, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: slave port %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->addr = tmp; -+ } -+ } -+ } ++ list_add(&core->list, &bus->cores); ++ } + -+ /* get & parse master wrappers */ -+ for (i = 0; i < wrappers[0]; i++) { -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_MWRAP, i); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * "has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (i == 0 && j == 0) -+ core->wrap = tmp; -+ } -+ } -+ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + -+ /* get & parse slave wrappers */ -+ for (i = 0; i < wrappers[1]; i++) { -+ u8 hack = (ports[1] == 1) ? 0 : 1; -+ for (j = 0; ; j++) { -+ tmp = bcma_erom_get_addr_desc(bus, &eromptr, -+ SCAN_ADDR_TYPE_SWRAP, i + hack); -+ if (tmp < 0) { -+ /* no more entries for port _i_ */ -+ /* pr_debug("erom: master wrapper %d " -+ * has %d descriptors\n", i, j); */ -+ break; -+ } else { -+ if (wrappers[0] == 0 && !i && !j) -+ core->wrap = tmp; -+ } -+ } -+ } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + -+ core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); -+ continue; -+out: -+ return err; ++ err = 0; ++ break; + } + -+ return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; +} --- /dev/null +++ b/drivers/bcma/scan.h @@ -1731,7 +2276,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,271 @@ +@@ -0,0 +1,298 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -1740,6 +2285,7 @@ + +#include +#include ++#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" @@ -1748,9 +2294,9 @@ +struct bcma_bus; + +enum bcma_hosttype { -+ BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { @@ -1864,6 +2410,7 @@ + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + @@ -1872,6 +2419,9 @@ + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; +}; @@ -1899,10 +2449,9 @@ +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); -+static inline int bcma_driver_register(struct bcma_driver *drv) -+{ -+ return __bcma_driver_register(drv, THIS_MODULE); -+} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { @@ -1924,70 +2473,93 @@ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + -+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} -+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} -+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} -+extern inline ++static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} -+extern inline ++static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} -+extern inline ++static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif -+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} -+extern inline ++static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -2005,7 +2577,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,296 @@ +@@ -0,0 +1,391 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2032,6 +2604,7 @@ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 @@ -2186,6 +2759,7 @@ +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -2209,6 +2783,7 @@ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ @@ -2247,6 +2822,64 @@ +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ @@ -2255,14 +2888,37 @@ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ @@ -2283,6 +2939,8 @@ +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + @@ -2301,6 +2959,15 @@ +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -2524,7 +3191,7 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -2656,10 +3323,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -2679,6 +3416,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -2686,6 +3426,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -2713,3 +3456,521 @@ +{ + pr_err("No support for PCI core in hostmode yet\n"); +} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch index 74e9c7fa12..32f5557673 100644 --- a/target/linux/generic/patches-3.0/020-ssb_update.patch +++ b/target/linux/generic/patches-3.0/020-ssb_update.patch @@ -1,5 +1,42 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -417,9 +417,9 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; @@ -12,8 +49,28 @@ switch (bus->chip_id) { case 0x4312: +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } @@ -48,8 +105,28 @@ { struct ssb_gige *dev; u32 base, tmslow, tmshigh; +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -314,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -77,16 +154,27 @@ { u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { -@@ -514,7 +514,7 @@ static void ssb_pcicore_pcie_setup_worka +@@ -514,12 +514,16 @@ static void ssb_pcicore_pcie_setup_worka * Generic and Clientmode operation code. **************************************************/ -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { - ssb_pcicore_fix_sprom_core_index(pc); +- ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); -@@ -529,7 +529,7 @@ static void ssb_pcicore_init_clientmode( + /* Disable PCI interrupts. */ +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { +@@ -529,7 +533,7 @@ static void ssb_pcicore_init_clientmode( } } @@ -95,9 +183,37 @@ { struct ssb_device *dev = pc->dev; +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -557,7 +557,7 @@ error: +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -557,7 +558,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -106,7 +222,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -768,9 +768,9 @@ out: +@@ -768,9 +769,9 @@ out: return err; } @@ -119,7 +235,7 @@ { int err; -@@ -851,8 +851,8 @@ err_disable_xtal: +@@ -851,8 +852,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -130,7 +246,7 @@ { int err; -@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -143,7 +259,7 @@ { int err; -@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -155,7 +271,7 @@ { int err; -@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -168,7 +284,7 @@ { int err; -@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -179,21 +295,84 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1265,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1259,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { case SSB_BUSTYPE_SSB: return 0; case SSB_BUSTYPE_PCI: - return SSB_PCI_DMA; -+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; -+ else -+ return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } default: __ssb_dma_not_implemented(dev); } --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -734,12 +734,9 @@ out_free: +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + + /* TODO - get remaining rev 8 stuff needed */ +@@ -734,12 +757,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -211,6 +390,15 @@ int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c +@@ -6,7 +6,7 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci # define ssb_pcihost_resume NULL #endif /* CONFIG_PM */ @@ -231,8 +419,28 @@ { driver->probe = ssb_pcihost_probe; driver->remove = ssb_pcihost_remove; +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk @@ -310,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus, } else { if (bus->bustype == SSB_BUSTYPE_PCI) { @@ -243,18 +451,59 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -27,6 +27,8 @@ struct ssb_sprom { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -99,7 +101,7 @@ struct ssb_sprom { +@@ -92,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -99,7 +110,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -263,3 +512,101 @@ }; +@@ -229,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -432,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -462,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, diff --git a/target/linux/generic/patches-3.0/025-bcma_backport.patch b/target/linux/generic/patches-3.0/025-bcma_backport.patch index 5e6317f34c..95012ad8dd 100644 --- a/target/linux/generic/patches-3.0/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.0/025-bcma_backport.patch @@ -12,7 +12,7 @@ config BCMA_HOST_PCI_POSSIBLE bool depends on BCMA && PCI = y -@@ -22,6 +27,12 @@ config BCMA_HOST_PCI +@@ -22,6 +27,25 @@ config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE @@ -21,24 +21,40 @@ + depends on BCMA && MIPS + help + PCI core hostmode operation (external PCI bus). ++ ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N + config BCMA_DEBUG bool "BCMA debugging" depends on BCMA --- a/drivers/bcma/Makefile +++ b/drivers/bcma/Makefile -@@ -1,6 +1,7 @@ +@@ -1,7 +1,10 @@ -bcma-y += main.o scan.o core.o +bcma-y += main.o scan.o core.o sprom.o bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o obj-$(CONFIG_BCMA) += bcma.o + ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -13,16 +13,23 @@ +@@ -13,11 +13,33 @@ struct bcma_bus; /* main.c */ @@ -46,16 +62,35 @@ -extern void bcma_bus_unregister(struct bcma_bus *bus); +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); - ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); ++ +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); + #ifdef CONFIG_BCMA_HOST_PCI /* host_pci.c */ - extern int __init bcma_host_pci_init(void); +@@ -25,4 +47,8 @@ extern int __init bcma_host_pci_init(voi extern void __exit bcma_host_pci_exit(void); #endif /* CONFIG_BCMA_HOST_PCI */ @@ -83,7 +118,7 @@ int bcma_core_enable(struct bcma_device *core, u32 flags) { -@@ -49,3 +50,75 @@ int bcma_core_enable(struct bcma_device +@@ -49,3 +50,77 @@ int bcma_core_enable(struct bcma_device return 0; } EXPORT_SYMBOL_GPL(bcma_core_enable); @@ -147,6 +182,8 @@ +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; @@ -159,9 +196,171 @@ + return BCMA_DMA_TRANSLATION_NONE; +} +EXPORT_SYMBOL(bcma_core_dma_translation); +--- a/drivers/bcma/driver_chipcommon.c ++++ b/drivers/bcma/driver_chipcommon.c +@@ -3,7 +3,7 @@ + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -23,6 +23,12 @@ static inline u32 bcma_cc_write32_masked + + void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) + { ++ u32 leddc_on = 10; ++ u32 leddc_off = 90; ++ ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); +@@ -38,6 +44,19 @@ void bcma_core_chipcommon_init(struct bc + bcma_pmu_init(cc); + if (cc->capabilities & BCMA_CC_CAP_PCTL) + pr_err("Power control not implemented!\n"); ++ ++ if (cc->core->id.rev >= 16) { ++ if (cc->core->bus->sprom.leddc_on_time && ++ cc->core->bus->sprom.leddc_off_time) { ++ leddc_on = cc->core->bus->sprom.leddc_on_time; ++ leddc_off = cc->core->bus->sprom.leddc_off_time; ++ } ++ bcma_cc_write32(cc, BCMA_CC_GPIOTIMER, ++ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | ++ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); ++ } ++ ++ cc->setup_done = true; + } + + /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +@@ -87,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcm + { + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); + } ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -53,6 +53,7 @@ static void bcma_pmu_resources_init(stru +@@ -2,7 +2,7 @@ + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. +@@ -11,20 +11,47 @@ + #include "bcma_private.h" + #include + +-static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, +- u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) + { +- u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + +- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); +- value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); +- value &= mask; +- value |= set; +- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); +- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); + } ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + + static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) + { +@@ -53,6 +80,7 @@ static void bcma_pmu_resources_init(stru max_msk = 0xFFFF; break; case 43224: @@ -169,7 +368,7 @@ break; default: pr_err("PMU resource config unknown for device 0x%04X\n", -@@ -74,6 +75,7 @@ void bcma_pmu_swreg_init(struct bcma_drv +@@ -74,6 +102,7 @@ void bcma_pmu_swreg_init(struct bcma_drv case 0x4313: case 0x4331: case 43224: @@ -177,7 +376,39 @@ break; default: pr_err("PMU switch/regulators init unknown for device " -@@ -96,11 +98,13 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -81,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv + } + } + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ + void bcma_pmu_workarounds(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; +@@ -90,17 +137,19 @@ void bcma_pmu_workarounds(struct bcma_dr + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: +- pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: if (bus->chipinfo.rev == 0) { pr_err("Workarounds for 43224 rev 0 not fully " "implemented\n"); @@ -192,9 +423,407 @@ default: pr_err("Workarounds unknown for device 0x%04X\n", bus->chipinfo.id); +@@ -132,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); + } ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c -@@ -157,7 +157,67 @@ static void bcma_pcicore_serdes_workarou +@@ -3,7 +3,7 @@ + * PCI Core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -157,7 +157,81 @@ static void bcma_pcicore_serdes_workarou * Init. **************************************************/ @@ -214,8 +843,10 @@ + chipid_top != 0x5300) + return false; + -+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; ++#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ @@ -229,6 +860,9 @@ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); @@ -238,6 +872,8 @@ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -245,7 +881,14 @@ +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; -+ int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) @@ -263,19 +906,110 @@ + return err; +} +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); +--- /dev/null ++++ b/drivers/bcma/driver_pci_host.c +@@ -0,0 +1,14 @@ ++/* ++ * Broadcom specific AMBA ++ * PCI Core in hostmode ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include ++ ++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ pr_err("No support for PCI core in hostmode yet\n"); ++} --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c -@@ -65,6 +65,54 @@ static void bcma_host_pci_write32(struct - iowrite32(value, core->bus->mmio + offset); +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + + static void bcma_host_pci_switch_core(struct bcma_device *core) + { +@@ -20,50 +21,108 @@ static void bcma_host_pci_switch_core(st + pr_debug("Switched to core: 0x%X\n", core->id.id); } +-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +-{ ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) ++{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); + } + + static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); + } + + static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); + } + + static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) + { ++ offset += bcma_host_pci_provide_access_to_core(core); ++ iowrite32(value, core->bus->mmio + offset); ++} ++ +#ifdef CONFIG_BCMA_BLOCKIO +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; -+ if (core->bus->mapped_core != core) -+ bcma_host_pci_switch_core(core); + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); +- iowrite32(value, core->bus->mmio + offset); + switch (reg_width) { + case sizeof(u8): + ioread8_rep(addr, buffer, count); @@ -314,13 +1048,12 @@ + default: + WARN_ON(1); + } -+} + } +#endif -+ + static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) { - if (core->bus->mapped_core != core) -@@ -87,6 +135,10 @@ const struct bcma_host_ops bcma_host_pci +@@ -87,6 +146,10 @@ const struct bcma_host_ops bcma_host_pci .write8 = bcma_host_pci_write8, .write16 = bcma_host_pci_write16, .write32 = bcma_host_pci_write32, @@ -331,7 +1064,46 @@ .aread32 = bcma_host_pci_aread32, .awrite32 = bcma_host_pci_awrite32, }; -@@ -175,6 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ +@@ -171,10 +234,46 @@ static void bcma_host_pci_remove(struct + pci_set_drvdata(dev, NULL); + } + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, @@ -339,26 +1111,278 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; +@@ -185,6 +284,8 @@ static struct pci_driver bcma_pci_bridge + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, + }; + + int __init bcma_host_pci_init(void) +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c -@@ -7,6 +7,7 @@ +@@ -6,7 +6,9 @@ + */ #include "bcma_private.h" ++#include #include +#include MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); -@@ -89,6 +90,8 @@ static int bcma_register_cores(struct bc +@@ -14,6 +16,7 @@ MODULE_LICENSE("GPL"); + static int bcma_bus_match(struct device *dev, struct device_driver *drv); + static int bcma_device_probe(struct device *dev); + static int bcma_device_remove(struct device *dev); ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + + static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) + { +@@ -48,6 +51,7 @@ static struct bus_type bcma_bus_type = { + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, ++ .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, + }; + +@@ -65,6 +69,10 @@ static struct bcma_device *bcma_find_cor + static void bcma_release_core_dev(struct device *dev) + { + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); + } + +@@ -79,6 +87,7 @@ static int bcma_register_cores(struct bc + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + +@@ -89,8 +98,13 @@ static int bcma_register_cores(struct bc switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: core->dev.parent = &bus->host_pci->dev; + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; ++ break; ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; break; - case BCMA_HOSTTYPE_NONE: +- case BCMA_HOSTTYPE_NONE: case BCMA_HOSTTYPE_SDIO: -@@ -144,6 +147,15 @@ int bcma_bus_register(struct bcma_bus *b + break; + } +@@ -137,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { +@@ -144,6 +165,15 @@ int bcma_bus_register(struct bcma_bus *b bcma_core_pci_init(&bus->drv_pci); } @@ -374,7 +1398,7 @@ /* Register found cores */ bcma_register_cores(bus); -@@ -151,13 +163,11 @@ int bcma_bus_register(struct bcma_bus *b +@@ -151,13 +181,80 @@ int bcma_bus_register(struct bcma_bus *b return 0; } @@ -385,12 +1409,492 @@ bcma_unregister_cores(bus); } -EXPORT_SYMBOL_GPL(bcma_bus_unregister); ++ ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) { +@@ -217,6 +314,16 @@ static int bcma_device_remove(struct dev + return 0; + } + ++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ ++ return add_uevent_var(env, ++ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", ++ core->id.manuf, core->id.id, ++ core->id.rev, core->id.class); ++} ++ + static int __init bcma_modinit(void) + { + int err; +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc + return addrl; + } + +-int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) + { +- u32 erombase; +- u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; + ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} ++ ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; +- u8 i, j; + +- int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; +@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus) + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); +- eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); +@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus) + INIT_LIST_HEAD(&core->list); + core->bus = bus; + +- /* get CIs */ +- cia = bcma_erom_get_ci(bus, &eromptr); +- if (cia < 0) { +- bcma_erom_push_ent(&eromptr); +- if (bcma_erom_is_end(bus, &eromptr)) +- break; +- err= -EILSEQ; +- goto out; +- } +- cib = bcma_erom_get_ci(bus, &eromptr); +- if (cib < 0) { +- err= -EILSEQ; +- goto out; +- } +- +- /* parse CIs */ +- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; +- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; +- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; +- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; +- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; +- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; +- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; +- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; +- +- if (((core->id.manuf == BCMA_MANUF_ARM) && +- (core->id.id == 0xFFF)) || +- (ports[1] == 0)) { +- bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; +- } +- +- /* check if component is a core at all */ +- if (wrappers[0] + wrappers[1] == 0) { +- /* we could save addrl of the router +- if (cid == BCMA_CORE_OOB_ROUTER) +- */ +- bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; +- } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + +- if (bcma_erom_is_bridge(bus, &eromptr)) { +- bcma_erom_skip_component(bus, &eromptr); +- continue; +- } ++ core->core_index = core_num++; ++ bus->nr_cores++; + +- /* get & parse master ports */ +- for (i = 0; i < ports[0]; i++) { +- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); +- if (mst_port_d < 0) { +- err= -EILSEQ; +- goto out; +- } +- } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + +- /* get & parse slave ports */ +- for (i = 0; i < ports[1]; i++) { +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: slave port %d " +- * "has %d descriptors\n", i, j); */ +- break; +- } else { +- if (i == 0 && j == 0) +- core->addr = tmp; +- } +- } +- } ++ list_add(&core->list, &bus->cores); ++ } + +- /* get & parse master wrappers */ +- for (i = 0; i < wrappers[0]; i++) { +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: master wrapper %d " +- * "has %d descriptors\n", i, j); */ +- break; +- } else { +- if (i == 0 && j == 0) +- core->wrap = tmp; +- } +- } +- } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + +- /* get & parse slave wrappers */ +- for (i = 0; i < wrappers[1]; i++) { +- u8 hack = (ports[1] == 1) ? 0 : 1; +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: master wrapper %d " +- * has %d descriptors\n", i, j); */ +- break; +- } else { +- if (wrappers[0] == 0 && !i && !j) +- core->wrap = tmp; +- } +- } +- } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +- bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + +- core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); +- continue; +-out: +- return err; ++ err = 0; ++ break; + } + +- return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; + } --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,171 @@ +@@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * SPROM reading @@ -522,10 +2026,80 @@ + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +} + +int bcma_sprom_get(struct bcma_bus *bus) @@ -545,6 +2119,9 @@ + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ @@ -552,6 +2129,9 @@ + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; @@ -564,15 +2144,27 @@ +} --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -6,6 +6,7 @@ +@@ -6,6 +6,8 @@ #include #include ++#include +#include /* SPROM sharing */ #include "bcma_regs.h" -@@ -24,6 +25,11 @@ struct bcma_chipinfo { +@@ -13,9 +15,9 @@ struct bcma_device; + struct bcma_bus; + + enum bcma_hosttype { +- BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, + }; + + struct bcma_chipinfo { +@@ -24,6 +26,11 @@ struct bcma_chipinfo { u8 pkg; }; @@ -584,7 +2176,7 @@ struct bcma_host_ops { u8 (*read8)(struct bcma_device *core, u16 offset); u16 (*read16)(struct bcma_device *core, u16 offset); -@@ -31,6 +37,12 @@ struct bcma_host_ops { +@@ -31,6 +38,12 @@ struct bcma_host_ops { void (*write8)(struct bcma_device *core, u16 offset, u8 value); void (*write16)(struct bcma_device *core, u16 offset, u16 value); void (*write32)(struct bcma_device *core, u16 offset, u32 value); @@ -597,55 +2189,139 @@ /* Agent ops */ u32 (*aread32)(struct bcma_device *core, u16 offset); void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); -@@ -117,6 +129,8 @@ struct bcma_device { +@@ -117,6 +130,9 @@ struct bcma_device { struct bcma_device_id id; struct device dev; + struct device *dma_dev; ++ + unsigned int irq; bool dev_registered; u8 core_index; -@@ -179,6 +193,10 @@ struct bcma_bus { +@@ -124,6 +140,9 @@ struct bcma_device { + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; + }; +@@ -151,10 +170,9 @@ struct bcma_driver { + }; + extern + int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +-static inline int bcma_driver_register(struct bcma_driver *drv) +-{ +- return __bcma_driver_register(drv, THIS_MODULE); +-} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ + extern void bcma_driver_unregister(struct bcma_driver *drv); + + struct bcma_bus { +@@ -176,49 +194,105 @@ struct bcma_bus { + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; }; - extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) -@@ -208,6 +226,18 @@ void bcma_write32(struct bcma_device *co +-extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read8(core, offset); + } +-extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read16(core, offset); + } +-extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read32(core, offset); + } +-extern inline ++static inline + void bcma_write8(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->write8(core, offset, value); + } +-extern inline ++static inline + void bcma_write16(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->write16(core, offset, value); + } +-extern inline ++static inline + void bcma_write32(struct bcma_device *core, u16 offset, u32 value) { core->bus->ops->write32(core, offset, value); } +-extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +#ifdef CONFIG_BCMA_BLOCKIO -+extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} -+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, -+ size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif - extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) { return core->bus->ops->aread32(core, offset); -@@ -218,7 +248,24 @@ void bcma_awrite32(struct bcma_device *c + } +-extern inline ++static inline + void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) + { core->bus->ops->awrite32(core, offset, value); } -+#define bcma_mask32(cc, offset, mask) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) -+#define bcma_set32(cc, offset, set) \ -+ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) -+#define bcma_maskset32(cc, offset, mask, set) \ -+ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); @@ -663,9 +2339,19 @@ #endif /* LINUX_BCMA_H_ */ --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -179,15 +179,7 @@ +@@ -24,6 +24,7 @@ + #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ + #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ + #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 + #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ + #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ + #define BCMA_PLLTYPE_NONE 0x00000000 +@@ -178,16 +179,9 @@ + #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C -#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ -#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ @@ -680,15 +2366,196 @@ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 #define BCMA_CC_UART0_IMR 0x0304 -@@ -244,6 +236,8 @@ +@@ -209,6 +203,7 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ + #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +@@ -244,6 +239,66 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ ++ ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) +@@ -253,14 +308,37 @@ struct bcma_chipcommon_pmu { + u32 crystalfreq; /* The active crystal frequency (in kHz) */ + }; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ + struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ + }; + + /* Register access */ +@@ -281,6 +359,8 @@ extern void bcma_core_chipcommon_init(st + extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); + extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +@@ -299,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm + /* PMU support */ + extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -85,5 +85,7 @@ struct bcma_drv_pci { @@ -699,53 +2566,6 @@ + struct bcma_device *core, bool enable); #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked - - void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) - { -+ u32 leddc_on = 10; -+ u32 leddc_off = 90; -+ - if (cc->core->id.rev >= 11) - cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); - cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); -@@ -38,6 +41,17 @@ void bcma_core_chipcommon_init(struct bc - bcma_pmu_init(cc); - if (cc->capabilities & BCMA_CC_CAP_PCTL) - pr_err("Power control not implemented!\n"); -+ -+ if (cc->core->id.rev >= 16) { -+ if (cc->core->bus->sprom.leddc_on_time && -+ cc->core->bus->sprom.leddc_off_time) { -+ leddc_on = cc->core->bus->sprom.leddc_on_time; -+ leddc_off = cc->core->bus->sprom.leddc_off_time; -+ } -+ bcma_cc_write32(cc, BCMA_CC_GPIOTIMER, -+ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | -+ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); -+ } - } - - /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ ---- /dev/null -+++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ -+/* -+ * Broadcom specific AMBA -+ * PCI Core in hostmode -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+#include -+ -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+{ -+ pr_err("No support for PCI core in hostmode yet\n"); -+} --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -1,13 +1,38 @@ @@ -788,3 +2608,22 @@ #define BCMA_RESET_CTL 0x0800 #define BCMA_RESET_CTL_RESET 0x0001 +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-3.1/020-ssb_update.patch b/target/linux/generic/patches-3.1/020-ssb_update.patch new file mode 100644 index 0000000000..9dc63adfa2 --- /dev/null +++ b/target/linux/generic/patches-3.1/020-ssb_update.patch @@ -0,0 +1,223 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -11,6 +11,7 @@ + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -516,10 +516,14 @@ static void ssb_pcicore_pcie_setup_worka + + static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) + { +- ssb_pcicore_fix_sprom_core_index(pc); ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); + + /* Disable PCI interrupts. */ +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -12,6 +12,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -1260,16 +1261,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: +- if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ if (pci_is_pcie(dev->bus->host_pci) && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; +- else +- return SSB_PCI_DMA; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } + default: + __ssb_dma_not_implemented(dev); + } +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ + sprom_extract_r458(out, in); + + /* TODO - get remaining rev 8 stuff needed */ +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -25,7 +25,7 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ +@@ -94,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -231,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -432,6 +432,23 @@ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -462,6 +479,46 @@ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ ++ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, diff --git a/target/linux/generic/patches-3.1/025-bcma_backport.patch b/target/linux/generic/patches-3.1/025-bcma_backport.patch new file mode 100644 index 0000000000..671c6ce24b --- /dev/null +++ b/target/linux/generic/patches-3.1/025-bcma_backport.patch @@ -0,0 +1,2016 @@ +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -33,6 +33,19 @@ config BCMA_DRIVER_PCI_HOSTMODE + help + PCI core hostmode operation (external PCI bus). + ++config BCMA_HOST_SOC ++ bool ++ depends on BCMA_DRIVER_MIPS ++ ++config BCMA_DRIVER_MIPS ++ bool "BCMA Broadcom MIPS core driver" ++ depends on BCMA && MIPS ++ help ++ Driver for the Broadcom MIPS core attached to Broadcom specific ++ Advanced Microcontroller Bus. ++ ++ If unsure, say N ++ + config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA +--- a/drivers/bcma/Makefile ++++ b/drivers/bcma/Makefile +@@ -2,7 +2,9 @@ bcma-y += main.o scan.o core.o sprom + bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o + bcma-y += driver_pci.o + bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o + bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o + obj-$(CONFIG_BCMA) += bcma.o + + ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -15,13 +15,32 @@ struct bcma_bus; + /* main.c */ + int bcma_bus_register(struct bcma_bus *bus); + void bcma_bus_unregister(struct bcma_bus *bus); ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips); ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus); ++#endif + + /* scan.c */ + int bcma_bus_scan(struct bcma_bus *bus); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core); ++void bcma_init_bus(struct bcma_bus *bus); + + /* sprom.c */ + int bcma_sprom_get(struct bcma_bus *bus); + ++/* driver_chipcommon.c */ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ ++/* driver_chipcommon_pmu.c */ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); ++ + #ifdef CONFIG_BCMA_HOST_PCI + /* host_pci.c */ + extern int __init bcma_host_pci_init(void); +--- a/drivers/bcma/core.c ++++ b/drivers/bcma/core.c +@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); + u32 bcma_core_dma_translation(struct bcma_device *core) + { + switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_SOC: ++ return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; +--- a/drivers/bcma/driver_chipcommon.c ++++ b/drivers/bcma/driver_chipcommon.c +@@ -26,6 +26,9 @@ void bcma_core_chipcommon_init(struct bc + u32 leddc_on = 10; + u32 leddc_off = 90; + ++ if (cc->setup_done) ++ return; ++ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); +@@ -52,6 +55,8 @@ void bcma_core_chipcommon_init(struct bc + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } ++ ++ cc->setup_done = true; + } + + /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +@@ -101,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcm + { + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); + } ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++{ ++ unsigned int irq; ++ u32 baud_base; ++ u32 i; ++ unsigned int ccrev = cc->core->id.rev; ++ struct bcma_serial_port *ports = cc->serial_ports; ++ ++ if (ccrev >= 11 && ccrev != 15) { ++ /* Fixed ALP clock */ ++ baud_base = bcma_pmu_alp_clock(cc); ++ if (ccrev >= 21) { ++ /* Turn off UART clock before switching clocksource. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ & ~BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ /* Set the override bit so we don't divide it */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLK0); ++ if (ccrev >= 21) { ++ /* Re-enable the UART clock. */ ++ bcma_cc_write32(cc, BCMA_CC_CORECTL, ++ bcma_cc_read32(cc, BCMA_CC_CORECTL) ++ | BCMA_CC_CORECTL_UARTCLKEN); ++ } ++ } else { ++ pr_err("serial not supported on this device ccrev: 0x%x\n", ++ ccrev); ++ return; ++ } ++ ++ irq = bcma_core_mips_irq(cc->core); ++ ++ /* Determine the registers of the UARTs */ ++ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ++ for (i = 0; i < cc->nr_serial_ports; i++) { ++ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + ++ (i * 256); ++ ports[i].irq = irq; ++ ports[i].baud_base = baud_base; ++ ports[i].reg_shift = 0; ++ } ++} ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -11,20 +11,47 @@ + #include "bcma_private.h" + #include + +-static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, +- u32 offset, u32 mask, u32 set) ++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) + { +- u32 value; ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++} + +- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); ++ ++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); ++ ++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); +- value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); +- value &= mask; +- value |= set; +- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); +- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); + } ++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); ++ ++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, ++ u32 set) ++{ ++ bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); ++ bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + + static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) + { +@@ -83,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv + } + } + ++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 val; ++ ++ val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); ++ if (enable) { ++ val |= BCMA_CHIPCTL_4331_EXTPA_EN; ++ if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) ++ val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } else { ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; ++ val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; ++ } ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); ++} ++ + void bcma_pmu_workarounds(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; +@@ -92,7 +137,7 @@ void bcma_pmu_workarounds(struct bcma_dr + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: +- pr_err("Enabling Ext PA lines not implemented\n"); ++ /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ + break; + case 43224: + if (bus->chipinfo.rev == 0) { +@@ -136,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); + } ++ ++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ case 0x4313: ++ case 0x5357: ++ case 0x4749: ++ case 53572: ++ /* always 20Mhz */ ++ return 20000 * 1000; ++ case 0x5356: ++ case 0x5300: ++ /* always 25Mhz */ ++ return 25000 * 1000; ++ default: ++ pr_warn("No ALP clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ } ++ return BCMA_CC_PMU_ALP_CLOCK; ++} ++ ++/* Find the output of the "m" pll divider given pll controls that start with ++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. ++ */ ++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, div, ndiv, p1, p2, fc; ++ struct bcma_bus *bus = cc->core->bus; ++ ++ BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); ++ ++ BUG_ON(!m || m > 4); ++ ++ if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { ++ /* Detect failure in clock setting */ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & 0x40000) ++ return 133 * 1000000; ++ } ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); ++ p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; ++ p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); ++ div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & ++ BCMA_CC_PPL_MDIV_MASK; ++ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); ++ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; ++ ++ /* Do calculation in Mhz */ ++ fc = bcma_pmu_alp_clock(cc) / 1000000; ++ fc = (p1 * ndiv * fc) / p2; ++ ++ /* Return clock in Hertz */ ++ return (fc / div) * 1000000; ++} ++ ++/* query bus clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4716: ++ case 0x4748: ++ case 47162: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5356: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5357: ++ case 0x4749: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 0x5300: ++ return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); ++ case 53572: ++ return 75000000; ++ default: ++ pr_warn("No backplane clock specified for %04X device, " ++ "pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ } ++ return BCMA_CC_PMU_HT_CLOCK; ++} ++ ++/* query cpu clock frequency for PMU-enabled chipcommon */ ++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id == 53572) ++ return 300000000; ++ ++ if (cc->pmu.rev >= 5) { ++ u32 pll; ++ switch (bus->chipinfo.id) { ++ case 0x5356: ++ pll = BCMA_CC_PMU5356_MAINPLL_PLL0; ++ break; ++ case 0x5357: ++ case 0x4749: ++ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; ++ break; ++ default: ++ pll = BCMA_CC_PMU4716_MAINPLL_PLL0; ++ break; ++ } ++ ++ /* TODO: if (bus->chipinfo.id == 0x5300) ++ return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ ++ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); ++ } ++ ++ return bcma_pmu_get_clockcontrol(cc); ++} +--- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2010, Bernhard Loos ++ * Copyright 2011, Hauke Mehrtens ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -173,7 +173,7 @@ static bool bcma_core_pci_is_in_hostmode + return false; + + #ifdef CONFIG_SSB_DRIVER_PCICORE +- if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) + return false; + #endif /* CONFIG_SSB_DRIVER_PCICORE */ + +@@ -189,6 +189,9 @@ static bool bcma_core_pci_is_in_hostmode + + void bcma_core_pci_init(struct bcma_drv_pci *pc) + { ++ if (pc->setup_done) ++ return; ++ + if (bcma_core_pci_is_in_hostmode(pc)) { + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); +@@ -198,6 +201,8 @@ void bcma_core_pci_init(struct bcma_drv_ + } else { + bcma_core_pci_clientmode_init(pc); + } ++ ++ pc->setup_done = true; + } + + int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +@@ -205,7 +210,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr + { + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; +- int err; ++ int err = 0; ++ ++ if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + + static void bcma_host_pci_switch_core(struct bcma_device *core) + { +@@ -20,48 +21,58 @@ static void bcma_host_pci_switch_core(st + pr_debug("Switched to core: 0x%X\n", core->id.id); + } + +-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +-{ ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) ++{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); + } + + static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); + } + + static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); + } + + static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); + } + +@@ -223,6 +234,41 @@ static void bcma_host_pci_remove(struct + pci_set_drvdata(dev, NULL); + } + ++#ifdef CONFIG_PM ++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++{ ++ /* Host specific */ ++ pci_save_state(dev); ++ pci_disable_device(dev); ++ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ ++ return 0; ++} ++ ++static int bcma_host_pci_resume(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ int err; ++ ++ /* Host specific */ ++ pci_set_power_state(dev, 0); ++ err = pci_enable_device(dev); ++ if (err) ++ return err; ++ pci_restore_state(dev); ++ ++ /* Bus specific */ ++ err = bcma_bus_resume(bus); ++ if (err) ++ return err; ++ ++ return 0; ++} ++#else /* CONFIG_PM */ ++# define bcma_host_pci_suspend NULL ++# define bcma_host_pci_resume NULL ++#endif /* CONFIG_PM */ ++ + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, +@@ -238,6 +284,8 @@ static struct pci_driver bcma_pci_bridge + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, ++ .suspend = bcma_host_pci_suspend, ++ .resume = bcma_host_pci_resume, + }; + + int __init bcma_host_pci_init(void) +--- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include ++#include ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -6,6 +6,7 @@ + */ + + #include "bcma_private.h" ++#include + #include + #include + +@@ -68,6 +69,10 @@ static struct bcma_device *bcma_find_cor + static void bcma_release_core_dev(struct device *dev) + { + struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ if (core->io_addr) ++ iounmap(core->io_addr); ++ if (core->io_wrap) ++ iounmap(core->io_wrap); + kfree(core); + } + +@@ -82,6 +87,7 @@ static int bcma_register_cores(struct bc + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: ++ case BCMA_CORE_MIPS_74K: + continue; + } + +@@ -95,7 +101,10 @@ static int bcma_register_cores(struct bc + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; +- case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SOC: ++ core->dev.dma_mask = &core->dev.coherent_dma_mask; ++ core->dma_dev = &core->dev; ++ break; + case BCMA_HOSTTYPE_SDIO: + break; + } +@@ -142,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { +@@ -171,6 +187,75 @@ void bcma_bus_unregister(struct bcma_bus + bcma_unregister_cores(bus); + } + ++int __init bcma_bus_early_register(struct bcma_bus *bus, ++ struct bcma_device *core_cc, ++ struct bcma_device *core_mips) ++{ ++ int err; ++ struct bcma_device *core; ++ struct bcma_device_id match; ++ ++ bcma_init_bus(bus); ++ ++ match.manuf = BCMA_MANUF_BCM; ++ match.id = BCMA_CORE_CHIPCOMMON; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for chip common core */ ++ err = bcma_bus_scan_early(bus, &match, core_cc); ++ if (err) { ++ pr_err("Failed to scan for common core: %d\n", err); ++ return -1; ++ } ++ ++ match.manuf = BCMA_MANUF_MIPS; ++ match.id = BCMA_CORE_MIPS_74K; ++ match.class = BCMA_CL_SIM; ++ match.rev = BCMA_ANY_REV; ++ ++ /* Scan for mips core */ ++ err = bcma_bus_scan_early(bus, &match, core_mips); ++ if (err) { ++ pr_err("Failed to scan for mips core: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init MIPS core */ ++ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ if (core) { ++ bus->drv_mips.core = core; ++ bcma_core_mips_init(&bus->drv_mips); ++ } ++ ++ pr_info("Early bus registered\n"); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++int bcma_bus_resume(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.setup_done = false; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ return 0; ++} ++#endif ++ + int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) + { + drv->drv.name = drv->name; +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc + return addrl; + } + +-int bcma_bus_scan(struct bcma_bus *bus) ++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, ++ u16 index) + { +- u32 erombase; +- u32 __iomem *eromptr, *eromend; ++ struct bcma_device *core; + ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->core_index == index) ++ return core; ++ } ++ return NULL; ++} ++ ++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, ++ struct bcma_device_id *match, int core_num, ++ struct bcma_device *core) ++{ ++ s32 tmp; ++ u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(eromptr); ++ if (bcma_erom_is_end(bus, eromptr)) ++ return -ESPIPE; ++ return -EILSEQ; ++ } ++ cib = bcma_erom_get_ci(bus, eromptr); ++ if (cib < 0) ++ return -EILSEQ; ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_erom_is_bridge(bus, eromptr)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENXIO; ++ } ++ ++ if (bcma_find_core_by_index(bus, core_num)) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ if (match && ((match->manuf != BCMA_ANY_MANUF && ++ match->manuf != core->id.manuf) || ++ (match->id != BCMA_ANY_ID && match->id != core->id.id) || ++ (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || ++ (match->class != BCMA_ANY_CLASS && match->class != core->id.class) ++ )) { ++ bcma_erom_skip_component(bus, eromptr); ++ return -ENODEV; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); ++ if (mst_port_d < 0) ++ return -EILSEQ; ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); ++ if (!core->io_addr) ++ return -ENOMEM; ++ core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); ++ if (!core->io_wrap) { ++ iounmap(core->io_addr); ++ return -ENOMEM; ++ } ++ } ++ return 0; ++} ++ ++void bcma_init_bus(struct bcma_bus *bus) ++{ + s32 tmp; +- u8 i, j; + +- int err; ++ if (bus->init_done) ++ return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; +@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus) + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ bus->init_done = true; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ int err, core_num = 0; ++ ++ bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); +- eromptr = bus->mmio; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); +@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus) + INIT_LIST_HEAD(&core->list); + core->bus = bus; + +- /* get CIs */ +- cia = bcma_erom_get_ci(bus, &eromptr); +- if (cia < 0) { +- bcma_erom_push_ent(&eromptr); +- if (bcma_erom_is_end(bus, &eromptr)) +- break; +- err= -EILSEQ; +- goto out; +- } +- cib = bcma_erom_get_ci(bus, &eromptr); +- if (cib < 0) { +- err= -EILSEQ; +- goto out; +- } +- +- /* parse CIs */ +- core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; +- core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; +- core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; +- ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; +- ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; +- wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; +- wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; +- core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; +- +- if (((core->id.manuf == BCMA_MANUF_ARM) && +- (core->id.id == 0xFFF)) || +- (ports[1] == 0)) { +- bcma_erom_skip_component(bus, &eromptr); ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; + continue; +- } +- +- /* check if component is a core at all */ +- if (wrappers[0] + wrappers[1] == 0) { +- /* we could save addrl of the router +- if (cid == BCMA_CORE_OOB_ROUTER) +- */ +- bcma_erom_skip_component(bus, &eromptr); ++ } else if (err == -ENXIO) + continue; +- } ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; + +- if (bcma_erom_is_bridge(bus, &eromptr)) { +- bcma_erom_skip_component(bus, &eromptr); +- continue; +- } ++ core->core_index = core_num++; ++ bus->nr_cores++; + +- /* get & parse master ports */ +- for (i = 0; i < ports[0]; i++) { +- u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); +- if (mst_port_d < 0) { +- err= -EILSEQ; +- goto out; +- } +- } ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + +- /* get & parse slave ports */ +- for (i = 0; i < ports[1]; i++) { +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: slave port %d " +- * "has %d descriptors\n", i, j); */ +- break; +- } else { +- if (i == 0 && j == 0) +- core->addr = tmp; +- } +- } +- } ++ list_add(&core->list, &bus->cores); ++ } + +- /* get & parse master wrappers */ +- for (i = 0; i < wrappers[0]; i++) { +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: master wrapper %d " +- * "has %d descriptors\n", i, j); */ +- break; +- } else { +- if (i == 0 && j == 0) +- core->wrap = tmp; +- } +- } +- } ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); + +- /* get & parse slave wrappers */ +- for (i = 0; i < wrappers[1]; i++) { +- u8 hack = (ports[1] == 1) ? 0 : 1; +- for (j = 0; ; j++) { +- tmp = bcma_erom_get_addr_desc(bus, &eromptr, +- SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { +- /* no more entries for port _i_ */ +- /* pr_debug("erom: master wrapper %d " +- * has %d descriptors\n", i, j); */ +- break; +- } else { +- if (wrappers[0] == 0 && !i && !j) +- core->wrap = tmp; +- } +- } +- } ++ return 0; ++} ++ ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; + ++ int err = -ENODEV; ++ int core_num = 0; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) { ++ eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); ++ if (!eromptr) ++ return -ENOMEM; ++ } else { ++ eromptr = bus->mmio; ++ } ++ ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ memset(core, 0, sizeof(*core)); ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ err = bcma_get_next_core(bus, &eromptr, match, core_num, core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) ++ continue; ++ else if (err == -ESPIPE) ++ break; ++ else if (err < 0) ++ return err; ++ ++ core->core_index = core_num++; ++ bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +- bus->nr_cores, bcma_device_name(&core->id), ++ core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + +- core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); +- continue; +-out: +- return err; ++ err = 0; ++ break; + } + +- return 0; ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); ++ ++ return err; + } +--- a/drivers/bcma/sprom.c ++++ b/drivers/bcma/sprom.c +@@ -129,10 +129,80 @@ static void bcma_sprom_extract_r8(struct + u16 v; + int i; + ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } ++ ++ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ ++ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; ++ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & ++ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; ++ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; ++ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & ++ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; ++ ++ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; ++ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & ++ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; ++ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; ++ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & ++ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; ++ ++ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; ++ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & ++ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; ++ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; ++ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & ++ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; ++ ++ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; ++ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & ++ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; ++ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; ++ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & ++ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; ++ ++ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; ++ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; ++ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; ++ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ ++ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ ++ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ ++ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; ++ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; ++ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; ++ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; ++ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & ++ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; + } + + int bcma_sprom_get(struct bcma_bus *bus) +@@ -152,6 +222,9 @@ int bcma_sprom_get(struct bcma_bus *bus) + if (!sprom) + return -ENOMEM; + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ +@@ -159,6 +232,9 @@ int bcma_sprom_get(struct bcma_bus *bus) + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ + err = bcma_sprom_valid(sprom); + if (err) + goto out; +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -6,6 +6,7 @@ + + #include + #include ++#include + #include /* SPROM sharing */ + + #include "bcma_regs.h" +@@ -14,9 +15,9 @@ struct bcma_device; + struct bcma_bus; + + enum bcma_hosttype { +- BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, ++ BCMA_HOSTTYPE_SOC, + }; + + struct bcma_chipinfo { +@@ -130,6 +131,7 @@ struct bcma_device { + + struct device dev; + struct device *dma_dev; ++ + unsigned int irq; + bool dev_registered; + +@@ -138,6 +140,9 @@ struct bcma_device { + u32 addr; + u32 wrap; + ++ void __iomem *io_addr; ++ void __iomem *io_wrap; ++ + void *drvdata; + struct list_head list; + }; +@@ -165,10 +170,9 @@ struct bcma_driver { + }; + extern + int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +-static inline int bcma_driver_register(struct bcma_driver *drv) +-{ +- return __bcma_driver_register(drv, THIS_MODULE); +-} ++#define bcma_driver_register(drv) \ ++ __bcma_driver_register(drv, THIS_MODULE) ++ + extern void bcma_driver_unregister(struct bcma_driver *drv); + + struct bcma_bus { +@@ -190,70 +194,93 @@ struct bcma_bus { + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; ++ u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; ++ struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; + }; + +-extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read8(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read8(core, offset); + } +-extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read16(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read16(core, offset); + } +-extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_read32(struct bcma_device *core, u16 offset) + { + return core->bus->ops->read32(core, offset); + } +-extern inline ++static inline + void bcma_write8(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->write8(core, offset, value); + } +-extern inline ++static inline + void bcma_write16(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->write16(core, offset, value); + } +-extern inline ++static inline + void bcma_write32(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->write32(core, offset, value); + } + #ifdef CONFIG_BCMA_BLOCKIO +-extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) + { + core->bus->ops->block_read(core, buffer, count, offset, reg_width); + } +-extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, +- size_t count, u16 offset, u8 reg_width) ++static inline void bcma_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) + { + core->bus->ops->block_write(core, buffer, count, offset, reg_width); + } + #endif +-extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) + { + return core->bus->ops->aread32(core, offset); + } +-extern inline ++static inline + void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) + { + core->bus->ops->awrite32(core, offset, value); + } + +-#define bcma_mask32(cc, offset, mask) \ +- bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) +-#define bcma_set32(cc, offset, set) \ +- bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) +-#define bcma_maskset32(cc, offset, mask, set) \ +- bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); ++} ++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) ++{ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | set); ++} ++static inline void bcma_maskset32(struct bcma_device *cc, ++ u16 offset, u32 mask, u32 set) ++{ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); ++} ++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); ++} ++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) ++{ ++ bcma_write16(cc, offset, bcma_read16(cc, offset) | set); ++} ++static inline void bcma_maskset16(struct bcma_device *cc, ++ u16 offset, u16 mask, u16 set) ++{ ++ bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); ++} + + extern bool bcma_core_is_enabled(struct bcma_device *core); + extern void bcma_core_disable(struct bcma_device *core, u32 flags); +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -24,6 +24,7 @@ + #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ + #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ + #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_NFLASH 0x00000200 + #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ + #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ + #define BCMA_PLLTYPE_NONE 0x00000000 +@@ -178,6 +179,7 @@ + #define BCMA_CC_PROG_CFG 0x0120 + #define BCMA_CC_PROG_WAITCNT 0x0124 + #define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ + #define BCMA_CC_FLASH_WAITCNT 0x012C + /* 0x1E0 is defined as shared BCMA_CLKCTLST */ + #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +@@ -201,6 +203,7 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ + #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +@@ -239,6 +242,64 @@ + #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ + #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + ++/* Divider allocation in 4716/47162/5356 */ ++#define BCMA_CC_PMU5_MAINPLL_CPU 1 ++#define BCMA_CC_PMU5_MAINPLL_MEM 2 ++#define BCMA_CC_PMU5_MAINPLL_SSB 3 ++ ++/* PLL usage in 4716/47162 */ ++#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 ++ ++/* PLL usage in 5356/5357 */ ++#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 ++ ++/* 4706 PMU */ ++#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++ ++/* ALP clock on pre-PMU chips */ ++#define BCMA_CC_PMU_ALP_CLOCK 20000000 ++/* HT clock for systems with PMU-enabled chipcommon */ ++#define BCMA_CC_PMU_HT_CLOCK 80000000 ++ ++/* PMU rev 5 (& 6) */ ++#define BCMA_CC_PPL_P1P2_OFF 0 ++#define BCMA_CC_PPL_P1_MASK 0x0f000000 ++#define BCMA_CC_PPL_P1_SHIFT 24 ++#define BCMA_CC_PPL_P2_MASK 0x00f00000 ++#define BCMA_CC_PPL_P2_SHIFT 20 ++#define BCMA_CC_PPL_M14_OFF 1 ++#define BCMA_CC_PPL_MDIV_MASK 0x000000ff ++#define BCMA_CC_PPL_MDIV_WIDTH 8 ++#define BCMA_CC_PPL_NM5_OFF 2 ++#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 ++#define BCMA_CC_PPL_NDIV_SHIFT 20 ++#define BCMA_CC_PPL_FMAB_OFF 3 ++#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 ++#define BCMA_CC_PPL_MRAT_SHIFT 28 ++#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 ++#define BCMA_CC_PPL_ABRAT_SHIFT 27 ++#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff ++#define BCMA_CC_PPL_PLLCTL_OFF 4 ++#define BCMA_CC_PPL_PCHI_OFF 5 ++#define BCMA_CC_PPL_PCHI_MASK 0x0000003f ++ ++/* BCM4331 ChipControl numbers. */ ++#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ ++#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ ++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ ++#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ ++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ ++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ ++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ ++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ ++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ ++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ ++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ ++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ ++ + /* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +@@ -247,14 +308,37 @@ struct bcma_chipcommon_pmu { + u32 crystalfreq; /* The active crystal frequency (in kHz) */ + }; + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++struct bcma_pflash { ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; ++ ++struct bcma_serial_port { ++ void *regs; ++ unsigned long clockspeed; ++ unsigned int irq; ++ unsigned int baud_base; ++ unsigned int reg_shift; ++}; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++ + struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; ++ u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ struct bcma_pflash pflash; ++ ++ int nr_serial_ports; ++ struct bcma_serial_port serial_ports[4]; ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ + }; + + /* Register access */ +@@ -275,6 +359,8 @@ extern void bcma_core_chipcommon_init(st + extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); + extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); ++ + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +@@ -293,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm + /* PMU support */ + extern void bcma_pmu_init(struct bcma_drv_cc *cc); + ++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, ++ u32 value); ++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, ++ u32 mask, u32 set); ++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set); ++ + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ -- 2.25.1