From 19724e28c81e3ff642f09c49f612cd147c54a697 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 22 Oct 2019 12:37:13 +0200 Subject: [PATCH] ramips: split base-files into subtargets While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space. In certain cases, keeping files in parent (=target) base-files was more convenient, and thus no splitting was performed for those. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (mt7621) 60958 B split (mt7620) 46358 B (- 14.3 kiB) split (mt7621) 48759 B (- 11.9 kiB) split (mt76x8) 44948 B (- 15.6 kiB) split (rt288x) 43508 B (- 17.0 kiB) split (rt305x) 45616 B (- 15.0 kiB) split (rt3883) 44176 B (- 16.4 kiB) Run-tested on: GL.iNet GL-MT300N-V2 (mt76x8) D-Link DWR-116 (mt7620) Signed-off-by: Adrian Schmutzler --- .../ramips/base-files/etc/board.d/01_leds | 481 ----------- .../ramips/base-files/etc/board.d/02_network | 752 ------------------ .../mt7620/base-files/etc/board.d/01_leds | 222 ++++++ .../mt7620/base-files/etc/board.d/02_network | 297 +++++++ .../base-files/etc/board.d/03_gpio_switches | 30 + .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 0 .../mt7620/base-files/lib/upgrade/platform.sh | 20 + .../mt7621/base-files/etc/board.d/01_leds | 83 ++ .../mt7621/base-files/etc/board.d/02_network | 238 ++++++ .../base-files/etc/board.d/03_gpio_switches | 16 - .../base-files/lib/upgrade/platform.sh | 4 - .../base-files/lib/upgrade/ubnt.sh | 0 .../base-files/sbin/fixup-mac-address | 0 .../mt76x8/base-files/etc/board.d/01_leds | 138 ++++ .../mt76x8/base-files/etc/board.d/02_network | 191 +++++ .../mt76x8/base-files/lib/upgrade/platform.sh | 24 + .../rt288x/base-files/etc/board.d/01_leds | 34 + .../rt288x/base-files/etc/board.d/02_network | 61 ++ .../rt288x/base-files/lib/upgrade/platform.sh | 20 + .../rt305x/base-files/etc/board.d/01_leds | 109 +++ .../rt305x/base-files/etc/board.d/02_network | 228 ++++++ .../lib/preinit/04_handle_checksumming | 13 - .../rt305x/base-files/lib/upgrade/platform.sh | 20 + .../rt3883/base-files/etc/board.d/01_leds | 35 + .../rt3883/base-files/etc/board.d/02_network | 100 +++ .../lib/preinit/04_handle_checksumming | 32 + .../rt3883/base-files/lib/upgrade/platform.sh | 20 + 27 files changed, 1902 insertions(+), 1266 deletions(-) delete mode 100755 target/linux/ramips/base-files/etc/board.d/01_leds delete mode 100755 target/linux/ramips/base-files/etc/board.d/02_network create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/02_network create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches rename target/linux/ramips/{ => mt7620}/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom (100%) create mode 100755 target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh create mode 100755 target/linux/ramips/mt7621/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/mt7621/base-files/etc/board.d/02_network rename target/linux/ramips/{ => mt7621}/base-files/etc/board.d/03_gpio_switches (55%) rename target/linux/ramips/{ => mt7621}/base-files/lib/upgrade/platform.sh (91%) rename target/linux/ramips/{ => mt7621}/base-files/lib/upgrade/ubnt.sh (100%) rename target/linux/ramips/{ => mt7621}/base-files/sbin/fixup-mac-address (100%) create mode 100755 target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/mt76x8/base-files/etc/board.d/02_network create mode 100755 target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh create mode 100755 target/linux/ramips/rt288x/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/rt288x/base-files/etc/board.d/02_network create mode 100755 target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh create mode 100755 target/linux/ramips/rt305x/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/rt305x/base-files/etc/board.d/02_network rename target/linux/ramips/{ => rt305x}/base-files/lib/preinit/04_handle_checksumming (65%) create mode 100755 target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/02_network create mode 100644 target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming create mode 100755 target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds deleted file mode 100755 index 662bf6b6cd..0000000000 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,481 +0,0 @@ -#!/bin/sh - -. /lib/functions/leds.sh -. /lib/functions/uci-defaults.sh - -set_wifi_led() { - ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" -} - - -board=$(board_name) -boardname="${board##*,}" - -board_config_update - -led_wlan="$(get_dt_led wlan)" -[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" - -case $board in -7links,px-4885-4m|\ -7links,px-4885-8m) - set_wifi_led "px-4885:orange:wifi" - ;; -aigale,ai-br100) - ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2" - set_wifi_led "$boardname:blue:wlan" - ;; -airlink101,ar670w|\ -airlink101,ar725w|\ -asiarf,awapn2403) - set_wifi_led "rt2800soc-phy0::radio" - ;; -airlive,air3gii|\ -aximcom,mr-102n|\ -edimax,3g-6200nl|\ -hilink,hlk-7628n|\ -netgear,wnce2001|\ -skylab,skw92a|\ -zbtlink,zbt-we2026) - set_wifi_led "$boardname:green:wlan" - ;; -alfa-network,ac1200rm) - set_wifi_led "$boardname:green:wlan2g" "wlan1" - ;; -alfa-network,awusfree1|\ -edimax,br-6478ac-v2|\ -edimax,ew-7478apc) - set_wifi_led "$boardname:blue:wlan" - ;; -alfa-network,tube-e4g) - ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0" - ;; -allnet,all0256n-4m|\ -allnet,all0256n-8m) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8" - set_wifi_led "rt2800pci-phy0::radio" - ;; -alphanetworks,asl26555-8m|\ -alphanetworks,asl26555-16m) - ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0" - set_wifi_led "asl26555:green:wlan" - ;; -asus,rp-n53) - ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0" - set_wifi_led "$boardname:blue:wifi" - ;; -asus,rt-n12p) - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1 - ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2 - set_wifi_led "$boardname:green:air" - ;; -asus,rt-n14u) - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1 - ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2 - set_wifi_led "$boardname:blue:air" - ;; -bdcom,wap2100-sk) - set_wifi_led "$boardname:green:wlan2g" - ;; -belkin,f9k1109v1) - set_usb_led "$boardname:green:usb1" - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0" - ;; -alfa-network,w502u|\ -dlink,dir-300-b1|\ -dlink,dir-300-b7|\ -dlink,dir-320-b1|\ -dlink,dir-600-b1|\ -dlink,dir-610-a1|\ -dlink,dir-615-d|\ -dlink,dir-615-h1|\ -dlink,dir-620-a1|\ -engenius,esr-9753|\ -hilink,hlk-rm04|\ -nexx,wt1520-4m|\ -nexx,wt1520-8m|\ -ralink,v11st-fe|\ -skyline,sl-r7205|\ -tenda,w306r-v2|\ -zyxel,keenetic-start|\ -zyxel,keenetic|\ -zyxel,nbg-419n-v2) - set_wifi_led "rt2800pci-phy0::radio" - ;; -asus,rt-ac51u|\ -kingston,mlw221|\ -kingston,mlwg2|\ -rakwireless,rak633|\ -sanlinking,d240) - set_wifi_led "$boardname:blue:wifi" - ;; -belkin,f5d8235-v1) - set_wifi_led "$boardname:blue:wireless" - ;; -comfast,cf-wr800n) - ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 - set_wifi_led "$boardname:white:wifi" - ;; -cudy,wr1000) - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" - ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08" - ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04" - ;; -d-team,newifi-d2) - ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10" - ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0" - ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1" - ;; -d-team,pbr-m1|\ -gehua,ghl-r-001) - ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" - ;; -dlink,dcs-930l-b1) - ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" - ;; -dlink,dir-620-d1|\ -dlink,dwr-116-a1|\ -head-weblink,hdrm200|\ -ohyeah,oy-0001|\ -planex,mzk-ex300np|\ -trendnet,tew-714tru|\ -zbtlink,zbt-wr8305rt|\ -zyxel,keenetic-omni|\ -zyxel,keenetic-omni-ii|\ -zyxel,keenetic-viva) - set_wifi_led "$boardname:green:wifi" - ;; -dlink,dir-860l-b1) - ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" - ;; -dlink,dwr-118-a1) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20" - set_wifi_led "$boardname:green:wlan2g" "wlan1" - ;; -dlink,dwr-118-a2) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - set_wifi_led "$boardname:green:wlan2g" "wlan1" - ;; -dlink,dwr-921-c1|\ -dlink,dwr-922-e2) - set_wifi_led "$boardname:green:wifi" - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" - ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link" - ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx" - ;; -dovado,tiny-ac|\ -fon,fonera-20n) - set_wifi_led "$boardname:orange:wifi" - ;; -edimax,3g-6200n|\ -edimax,br-6475nd|\ -planex,mzk-w300nh2) - set_wifi_led "$boardname:amber:wlan" - ;; -edimax,ew-7476rpc|\ -edimax,ew-7478ac) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20" - ;; -elecom,wrh-300cr) - set_wifi_led "$boardname:green:wlan" - ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0" - ;; -engenius,esr600) - ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0" - ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1" - ;; -glinet,gl-mt300a|\ -glinet,gl-mt300n|\ -glinet,gl-mt750) - set_wifi_led "$boardname:wlan" - ;; -glinet,gl-mt300n-v2) - set_wifi_led "$boardname:red:wlan" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1" - ;; -gnubee,gb-pc1|\ -gnubee,gb-pc2) - ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01" - ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10" - ;; -hauppauge,broadway) - set_wifi_led "$boardname:red:wps_active" - ;; -hiwifi,hc5661) - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" - set_wifi_led "$boardname:blue:wlan2g" - ;; -hiwifi,hc5661a|\ -hiwifi,hc5761a|\ -xzwifi,creativebox-v1) - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" - ;; -hiwifi,hc5761) - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" - ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" - ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" - ;; -hiwifi,hc5861) - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20" - ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" - ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" - ;; -hnet,c108) - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" - ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0" - ;; -hootoo,ht-tm02) - ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0" - set_wifi_led "$boardname:blue:wlan" - ;; -huawei,hg255d) - set_wifi_led "$boardname:green:wlan" - ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2" - ;; -intenso,memory2move) - set_wifi_led "$boardname:blue:wifi" - ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0" - ;; -iodata,wn-ac1167gr|\ -iodata,wn-ac733gr3) - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio" - ;; -kimax,u25awf-h1) - set_wifi_led "u25awf:red:wifi" - ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0" - ;; -kimax,u35wf) - set_wifi_led "$boardname:blue:wifi" - ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" - ;; -lava,lr-25g001) - ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1" - ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0" - ;; -lenovo,newifi-y1) - ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1" - ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0" - ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03" - ;; -lenovo,newifi-y1s) - ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1" - ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0" - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx" - ;; -mediatek,linkit-smart-7688) - ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt" - ;; -mikrotik,rbm11g) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100" - ;; -mtc,wr1201) - ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f" - ;; -netgear,ex2700|\ -netgear,wn3000rp-v3) - set_wifi_led "$boardname:green:router" - ;; -netgear,ex3700) - ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0" - ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1" - ;; -netgear,r6120) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" - ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt" - ;; -netgear,r6220|\ -netgear,r6260|\ -netgear,r6350|\ -netgear,r6850|\ -netgear,wndr3700-v5) - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" - ;; -omnima,hpm) - ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" - set_wifi_led "$boardname:green:wifi" - ;; -omnima,miniembplug) - set_wifi_led "$boardname:red:wlan" - ;; -phicomm,psg1208) - set_wifi_led "$boardname:white:wlan2g" - ;; -planex,mzk-ex750np|\ -zbtlink,zbt-we826-e) - set_wifi_led "$boardname:red:wifi" - ;; -tama,w06) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" - ;; -tplink,archer-c2-v1) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" - set_wifi_led "$boardname:green:wlan" - ;; -tplink,archer-c20-v1) - ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" - ;; -tplink,archer-c20-v4) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" - ;; -tplink,archer-c20i) - ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio" - ;; -tplink,archer-c50-v1) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1 - set_wifi_led "$boardname:green:wlan5g" - ;; -tplink,archer-c50-v3|\ -tplink,archer-c50-v4) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" - ;; -tplink,archer-mr200) - ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1" - ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0" - set_wifi_led "$boardname:white:wlan" - ;; -tplink,re350-v1|\ -tplink,re650-v1) - ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0" - ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1" - ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx" - ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01" - ;; -tplink,tl-mr3020-v3) - set_wifi_led "$boardname:green:wlan" - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" - ;; -tplink,tl-mr3420-v5|\ -tplink,tl-wr842n-v5) - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ;; -tplink,tl-wa801nd-v5) - ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" - ;; -tplink,tl-wr840n-v4) - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ;; -tplink,tl-wr841n-v13) - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2" - ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4" - ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8" - ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ;; -tplink,tl-wr841n-v14) - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ;; -tplink,tl-wr902ac-v3) - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10" - ;; -unielec,u7628-01-16m) - ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2" - ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4" - ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8" - ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10" - ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01" - set_wifi_led "u7628-01:green:wlan" - ;; -vocore,vocore-8m|\ -vocore,vocore-16m) - ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0" - ;; -wavlink,wl-wn570ha1) - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49" - ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84" - ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100" - set_wifi_led "$boardname:green:wifi" - ;; -wavlink,wl-wn575a3) - ucidef_set_rssimon "wlan1" "200000" "1" - ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49" - ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84" - ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100" - ;; -xiaomi,mir3g) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" - ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" - ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" - ;; -xiaomi,mir3p) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" - ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" - ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" - ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" - ;; -youhua,wr1200js) - ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01" - ;; -youku,yk1) - set_wifi_led "$boardname:blue:air" - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" - ;; -zbtlink,zbt-ape522ii) - ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1" - ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx" - ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx" - ;; -zbtlink,zbt-wa05) - set_wifi_led "$boardname:blue:air" - ;; -zbtlink,zbt-we826-16m|\ -zbtlink,zbt-we826-32m) - set_wifi_led "zbt-we826:green:wifi" - ;; -zbtlink,zbt-we1026-5g-16m) - ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0" - set_wifi_led "we1026-5g:green:wifi" - ;; -zbtlink,zbt-we1226) - set_wifi_led "$boardname:green:wlan" - ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" - ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02" - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10" - ;; -zorlik,zl5900v2) - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0 - ;; -zyxel,keenetic-extra-ii) - set_wifi_led "$boardname:green:wifi" - ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network deleted file mode 100755 index 480726a870..0000000000 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ /dev/null @@ -1,752 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/uci-defaults.sh -. /lib/functions/system.sh - -ramips_setup_rt3x5x_vlans() -{ - if [ ! -x /sbin/swconfig ]; then - # legacy default - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - return - fi - local wanports="" - local lanports="" - for port in 5 4 3 2 1 0; do - if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then - continue - fi - if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then - wanports="$port:wan $wanports" - else - lanports="$port:lan $lanports" - fi - done - ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0" -} - -ramips_setup_interfaces() -{ - local board="$1" - - case $board in - accton,wr6202|\ - alfa-network,w502u|\ - netcore,nw718|\ - petatel,psr-680w|\ - skyline,sl-r7205|\ - upvel,ur-336un) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ;; - adslr,g7|\ - afoundry,ew1200|\ - aigale,ai-br100|\ - alfa-network,ac1200rm|\ - asus,rt-n12p|\ - buffalo,whr-g300n|\ - d-team,pbr-m1|\ - dlink,dir-300-b7|\ - dlink,dir-320-b1|\ - dlink,dir-610-a1|\ - dlink,dir-810l|\ - dlink,dwr-116-a1|\ - dlink,dwr-921-c1|\ - dlink,dwr-922-e2|\ - edimax,3g-6200n|\ - firefly,firewrt|\ - hilink,hlk-rm04|\ - hiwifi,hc5661a|\ - hiwifi,hc5761a|\ - hiwifi,hc5962|\ - mediatek,ap-mt7621a-v60|\ - mediatek,mt7621-eval-board|\ - mediatek,mt7628an-eval-board|\ - mercury,mac1200r-v2|\ - mqmaker,witi|\ - mtc,wr1201|\ - netis,wf-2881|\ - nixcore,x1-16m|\ - nixcore,x1-8m|\ - ohyeah,oy-0001|\ - phicomm,k2p|\ - phicomm,psg1208|\ - phicomm,psg1218a|\ - planex,db-wrt01|\ - planex,mzk-750dhp|\ - planex,mzk-w300nh2|\ - planex,vr500|\ - samknows,whitebox-v8|\ - sanlinking,d240|\ - storylink,sap-g3200u3|\ - telco-electronics,x1|\ - totolink,a7000r|\ - totolink,lr1200|\ - unielec,u7621-06-16m|\ - unielec,u7621-06-64m|\ - wavlink,wl-wn570ha1|\ - wavlink,wl-wn575a3|\ - xiaomi,miwifi-mini|\ - xiaomi,miwifi-nano|\ - xiaoyu,xy-c5|\ - xzwifi,creativebox-v1|\ - youku,yk-l2|\ - youku,yk1|\ - zbtlink,zbt-ape522ii|\ - zbtlink,zbt-we1326|\ - zbtlink,zbt-we3526|\ - zbtlink,zbt-we826-16m|\ - zbtlink,zbt-we826-32m|\ - zbtlink,zbt-we826-e|\ - zbtlink,zbt-wg2626|\ - zbtlink,zbt-wg3526-16m|\ - zbtlink,zbt-wg3526-32m|\ - zbtlink,zbt-wr8305rt|\ - zyxel,keenetic|\ - zyxel,keenetic-omni) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" - ;; - airlink101,ar670w|\ - airlink101,ar725w|\ - asus,rt-ac51u|\ - rakwireless,rak633) - ucidef_add_switch "switch0" \ - "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" - ;; - alfa-network,awusfree1|\ - alfa-network,tube-e4g|\ - buffalo,wli-tx4-ag300n|\ - buffalo,wmr-300|\ - dlink,dap-1522-a1|\ - dlink,dch-m225|\ - d-team,pbr-d1|\ - elecom,wrh-300cr|\ - huawei,d105|\ - kimax,u25awf-h1|\ - loewe,wmdr-143n|\ - netgear,ex2700|\ - netgear,ex3700|\ - netgear,wn3000rp-v3|\ - omnima,hpm|\ - planex,cs-qr10|\ - planex,mzk-ex300np|\ - planex,mzk-ex750np|\ - ravpower,wd03|\ - sercomm,na930|\ - tama,w06|\ - tplink,tl-mr3020-v3|\ - tplink,tl-wr802n-v4) - ucidef_set_interface_lan "eth0" - ;; - allnet,all0256n-4m|\ - allnet,all0256n-8m|\ - allnet,all5002|\ - allnet,all5003|\ - dlink,dcs-930l-b1|\ - dlink,dcs-930|\ - edimax,ew-7476rpc|\ - edimax,ew-7478ac|\ - hame,mpr-a2|\ - hauppauge,broadway|\ - hootoo,ht-tm02|\ - intenso,memory2move|\ - kimax,u35wf|\ - mediatek,linkit-smart-7688|\ - microduino,microwrt|\ - mikrotik,rbm11g|\ - netgear,wnce2001|\ - onion,omega2p|\ - onion,omega2|\ - tenda,3g150b|\ - tenda,3g300m|\ - tenda,w150m|\ - thunder,timecloud|\ - tplink,tl-wa801nd-v5|\ - unbranded,a5-v11|\ - wansview,ncs601w|\ - widora,neo-16m|\ - widora,neo-32m|\ - yukai,bocco|\ - zbtlink,zbt-cpe102|\ - zorlik,zl5900v2|\ - zte,q7) - ucidef_add_switch "switch0" - ucidef_add_switch_attr "switch0" "enable" "false" - ucidef_set_interface_lan "eth0" - ;; - alphanetworks,asl26555-8m|\ - alphanetworks,asl26555-16m|\ - asus,rp-n53) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" - ;; - argus,atp-52b|\ - asiarf,awm002-evb-4m|\ - asiarf,awm002-evb-8m|\ - asus,rt-ac57u|\ - asus,rt-n14u|\ - bdcom,wap2100-sk|\ - dlink,dir-645|\ - glinet,gl-mt300a|\ - glinet,gl-mt300n|\ - glinet,gl-mt750|\ - hilink,hlk-7628n|\ - hiwifi,hc5661|\ - hiwifi,hc5861b|\ - jcg,jhr-n805r|\ - jcg,jhr-n825r|\ - jcg,jhr-n926r|\ - mikrotik,rb750gr3|\ - mikrotik,rbm33g|\ - planex,mzk-wdpr|\ - skylab,skw92a|\ - tplink,archer-c20-v4|\ - tplink,archer-c20i|\ - tplink,archer-c50-v3|\ - tplink,archer-c50-v4|\ - tplink,tl-mr3420-v5|\ - tplink,tl-wr840n-v4|\ - tplink,tl-wr840n-v5|\ - tplink,tl-wr841n-v13|\ - tplink,tl-wr841n-v14|\ - tplink,tl-wr842n-v5|\ - unielec,u7628-01-16m|\ - ubiquiti,edgerouterx|\ - ubiquiti,edgerouterx-sfp|\ - upvel,ur-326n4g|\ - wrtnode,wrtnode|\ - wrtnode,wrtnode2p|\ - wrtnode,wrtnode2r|\ - youhua,wr1200js|\ - zbtlink,zbt-wa05|\ - zyxel,keenetic-extra-ii) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" - ;; - asiarf,ap7621-001) - ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0" - ;; - asiarf,ap7621-nv1) - ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0" - ;; - asiarf,awapn2403) - ucidef_add_switch "switch0" \ - "0:lan" "1:wan" "6@eth0" - ;; - asus,rt-ac65p|\ - asus,rt-ac85p|\ - dlink,dir-860l-b1|\ - elecom,wrc-1167ghbk2-s|\ - elecom,wrc-1900gst|\ - elecom,wrc-2533gst|\ - huawei,hg255d|\ - iodata,wn-ax1167gr|\ - iodata,wn-gx300gr|\ - iodata,wnpr2600g|\ - iptime,a604m) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" - ;; - asus,rt-n15|\ - belkin,f9k1109v1|\ - sitecom,wl-351) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" - ;; - asus,rt-n56u) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" - ;; - asus,wl-330n|\ - easyacc,wizard-8800|\ - kingston,mlwg2) - ucidef_set_interface_lan "eth0.1" - ;; - aximcom,mr-102n|\ - kingston,mlw221) - ucidef_set_interface_lan "eth0.2" - ;; - belkin,f5d8235-v1|\ - belkin,f5d8235-v2|\ - buffalo,wzr-agl300nh|\ - ralink,v11st-fe|\ - trendnet,tew-714tru) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" - ;; - buffalo,wcr-1166ds) - ucidef_add_switch "switch0" \ - "3:lan" "4:wan" "6@eth0" - ;; - buffalo,whr-300hp2|\ - buffalo,whr-600d|\ - buffalo,wsr-1166dhp|\ - buffalo,wsr-600dhp) - ucidef_add_switch "switch0" \ - "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0" - ;; - buffalo,whr-1166d) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" - ;; - comfast,cf-wr800n|\ - hnet,c108|\ - tplink,tl-wr902ac-v3|\ - trendnet,tew-638apb-v2) - ucidef_add_switch "switch0" \ - "4:lan" "6@eth0" - ;; - cudy,wr1000|\ - xiaomi,mir3g-v2) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "4:wan" "6@eth0" - ;; - dlink,dir-510l|\ - glinet,vixmini|\ - netgear,ex6150|\ - tplink,re350-v1|\ - tplink,re650-v1) - ucidef_add_switch "switch0" \ - "0:lan" "6@eth0" - ;; - dlink,dir-615-h1|\ - d-team,newifi-d2|\ - wevo,11acnas|\ - wevo,w2914ns-v2|\ - zbtlink,zbt-we2026) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" - ;; - dlink,dwr-118-a1) - ucidef_add_switch "switch0" \ - "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0" - ;; - dlink,dwr-118-a2) - ucidef_add_switch "switch0" \ - "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0" - ;; - duzun,dm06) - ucidef_add_switch "switch0" \ - "1:lan" "0:wan" "6@eth0" - ;; - edimax,br-6475nd) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" - ;; - edimax,br-6478ac-v2|\ - tplink,archer-c2-v1) - ucidef_add_switch "switch1" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" - ;; - engenius,esr600) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0" - ;; - fon,fon2601) - ucidef_add_switch "switch0" \ - "0:lan" "4:wan" "6@eth0" - ;; - edimax,rg21s) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" - ;; - gehua,ghl-r-001) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" - ;; - glinet,gl-mt300n-v2) - ucidef_add_switch "switch0" \ - "1:lan" "0:wan" "6@eth0" - ;; - gnubee,gb-pc1|\ - gnubee,gb-pc2) - ucidef_add_switch "switch0" \ - "0:lan" "4:lan" "6@eth0" - ;; - head-weblink,hdrm200) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" - ;; - hiwifi,hc5761) - ucidef_add_switch "switch0" \ - "1:lan" "4:lan" "0:wan" "6@eth0" - ;; - hiwifi,hc5861) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "5:wan" "6@eth0" - ;; - iodata,wn-ac1167gr|\ - iodata,wn-ac733gr3) - ucidef_add_switch "switch1" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" - ;; - iptime,a3) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "0:wan" "6@eth0" - ;; - lava,lr-25g001|\ - sitecom,wlr-6000|\ - trendnet,tew-691gr|\ - trendnet,tew-692gr) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" - ;; - lenovo,newifi-d1) - ucidef_add_switch "switch0" \ - "1:lan:2" "2:lan:1" "4:wan" "6@eth0" - ;; - lenovo,newifi-y1|\ - zbtlink,zbt-we1226) - ucidef_add_switch "switch0" \ - "0:lan:2" "1:lan:1" "4:wan" "6@eth0" - ;; - lenovo,newifi-y1s) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0" - ;; - linksys,e1700|\ - ralink,mt7620a-mt7530-evb) - ucidef_add_switch "switch1" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" - ;; - linksys,re6500) - ucidef_add_switch "switch0" \ - "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0" - ;; - netgear,r6120|\ - netgear,r6220|\ - netgear,r6260|\ - netgear,r6350|\ - netgear,r6850|\ - netgear,wndr3700-v5) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" - ;; - nexx,wt1520-4m|\ - nexx,wt1520-8m|\ - vonets,var11n-300) - ucidef_add_switch "switch0" \ - "0:lan" "4:wan" "6@eth0" - ;; - nexx,wt3020-4m|\ - nexx,wt3020-8m) - ucidef_add_switch "switch0" \ - "4:lan" "0:wan" "6@eth0" - ;; - phicomm,k2g) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" - ;; - phicomm,psg1218b) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" - ;; - planex,mzk-dp150n|\ - vocore,vocore-8m|\ - vocore,vocore-16m) - ucidef_add_switch "switch0" \ - "0:lan" "4:lan" "6t@eth0" - ;; - samsung,cy-swr1100) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" - ;; - sparklan,wcr-150gn|\ - zbtlink,zbt-we1026-5g-16m) - ucidef_add_switch "switch0" \ - "0:lan" "6t@eth0" - ;; - tplink,archer-c20-v1|\ - tplink,archer-c50-v1) - ucidef_add_switch "switch0" \ - "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" - ;; - tplink,archer-mr200) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0" - ucidef_set_interface_wan "usb0" - ;; - vocore,vocore2|\ - vocore,vocore2-lite) - ucidef_add_switch "switch0" \ - "0:lan" "2:lan" "6t@eth0" - ;; - wiznet,wizfi630a) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:wan" "6@eth0" - ;; - wiznet,wizfi630s) - ucidef_add_switch "switch0" \ - "0:wan" "3:lan" "4:lan" "6@eth0" - ;; - xiaomi,mir3g) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" - ;; - xiaomi,mir3p) - ucidef_add_switch "switch0" \ - "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" - ;; - xiaomi,mir4a-100m) - ucidef_add_switch "switch0" \ - "4:lan:1" "2:lan:2" "0:wan" "6@eth0" - ;; - zyxel,keenetic-omni-ii) - ucidef_add_switch "switch0" \ - "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0" - ;; - zyxel,keenetic-start) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0" - ;; - zyxel,keenetic-viva) - ucidef_add_switch "switch1" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0" - ;; - *) - RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo) - if [ -n "${RT3X5X}" ]; then - ramips_setup_rt3x5x_vlans - else - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - fi - ;; - esac -} - -ramips_setup_macs() -{ - local board="$1" - local lan_mac="" - local wan_mac="" - - case $board in - 8devices,carambola|\ - alfa-network,w502u|\ - arcwireless,freestation5|\ - lenovo,newifi-y1|\ - lenovo,newifi-y1s|\ - netgear,wnce2001|\ - ohyeah,oy-0001|\ - phicomm,k2g|\ - skylab,skw92a|\ - totolink,lr1200) - wan_mac=$(mtd_get_mac_binary factory 0x2e) - ;; - dlink,dir-300-b7|\ - dlink,dir-320-b1|\ - dlink,dir-620-a1|\ - engenius,esr-9753|\ - hame,mpr-a1|\ - hauppauge,broadway|\ - huawei,d105|\ - hilink,hlk-7628n|\ - hilink,hlk-rm04|\ - nexaira,bc2|\ - petatel,psr-680w|\ - skyline,sl-r7205) - lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - asus,rt-ac57u|\ - d-team,newifi-d2|\ - d-team,pbr-m1|\ - elecom,wrc-1167ghbk2-s|\ - elecom,wrc-1900gst|\ - elecom,wrc-2533gst|\ - lenovo,newifi-d1|\ - phicomm,k2p|\ - planex,vr500|\ - samknows,whitebox-v8|\ - youhua,wr1200js|\ - youku,yk-l2|\ - zbtlink,zbt-we3526) - wan_mac=$(mtd_get_mac_binary factory 0xe006) - ;; - asus,rt-ac65p|\ - asus,rt-ac85p) - wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - asus,rt-n56u) - lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") - wan_mac=$(mtd_get_mac_binary factory 0x8004) - ;; - belkin,f9k1109v1) - wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC) - lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC) - label_mac=$wan_mac - ;; - buffalo,wcr-1166ds|\ - buffalo,wsr-1166dhp) - local index="$(find_mtd_index "board_data")" - wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" - lan_mac=$wan_mac - ;; - buffalo,whr-1166d|\ - buffalo,whr-300hp2|\ - buffalo,whr-600d|\ - buffalo,whr-g300n|\ - buffalo,wsr-600dhp|\ - glinet,gl-mt300n-v2|\ - xiaomi,miwifi-mini|\ - zyxel,keenetic-start) - # This empty case has to be kept for devices without any MAC address adjustments - ;; - cudy,wr1000) - wan_mac=$(mtd_get_mac_binary factory 0x2e) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - dlink,dch-m225|\ - samsung,cy-swr1100) - lan_mac=$(mtd_get_mac_ascii factory lanmac) - ;; - dlink,dir-510l|\ - dlink,dwr-116-a1|\ - dlink,dwr-118-a1|\ - dlink,dwr-118-a2|\ - dlink,dwr-921-c1|\ - dlink,dwr-922-e2|\ - lava,lr-25g001) - wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) - lan_mac=$(macaddr_add "$wan_mac" 1) - label_mac=$wan_mac - ;; - dlink,dir-615-d|\ - dlink,dir-615-h1|\ - glinet,gl-mt300a|\ - glinet,gl-mt300n|\ - glinet,gl-mt750|\ - zbtlink,zbt-wg3526-16m|\ - zbtlink,zbt-wg3526-32m) - wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - dlink,dir-645) - lan_mac=$(mtd_get_mac_ascii nvram lanmac) - wan_mac=$(mtd_get_mac_ascii nvram wanmac) - ;; - dlink,dir-860l-b1) - lan_mac=$(mtd_get_mac_ascii factory lanmac) - wan_mac=$(mtd_get_mac_ascii factory wanmac) - label_mac=$(cat /sys/class/ieee80211/phy1/macaddress) - ;; - dovado,tiny-ac) - lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) - wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR) - ;; - edimax,br-6475nd) - wan_mac=$(mtd_get_mac_binary devdata 0x7) - ;; - edimax,br-6478ac-v2|\ - netgear,r6260|\ - netgear,r6350|\ - netgear,r6850) - wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) - ;; - edimax,rg21s|\ - engenius,esr600) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - ;; - hiwifi,hc5661|\ - hiwifi,hc5661a|\ - hiwifi,hc5761|\ - hiwifi,hc5761a|\ - hiwifi,hc5861|\ - hiwifi,hc5861b|\ - hiwifi,hc5962) - lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") - label_mac=$lan_mac - [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - iodata,wn-ac1167gr|\ - iodata,wn-ac733gr3) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - ;; - iodata,wn-ax1167gr|\ - iodata,wn-gx300gr|\ - trendnet,tew-692gr) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) - ;; - iodata,wnpr2600g) - wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) - label_mac=$wan_mac - ;; - iptime,a3|\ - iptime,a604m) - wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) - ;; - linksys,e1700) - wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) - ;; - mediatek,linkit-smart-7688|\ - onion,omega2|\ - onion,omega2p) - wan_mac=$(mtd_get_mac_binary factory 0x4) - lan_mac=$(mtd_get_mac_binary factory 0x2e) - ;; - mercury,mac1200r-v2) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1) - ;; - poray,m3|\ - poray,m4-4m|\ - poray,m4-8m|\ - poray,x5|\ - poray,x8) - lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2) - ;; - sitecom,wlr-6000) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2) - ;; - sparklan,wcr-150gn|\ - wiznet,wizfi630a|\ - zyxel,keenetic-omni|\ - zyxel,keenetic-omni-ii|\ - zyxel,keenetic-viva) - wan_mac=$(mtd_get_mac_binary factory 0x28) - ;; - tenda,w306r-v2) - wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5) - ;; - trendnet,tew-691gr) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3) - ;; - vocore,vocore2|\ - vocore,vocore2-lite) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - xiaomi,mir3g) - lan_mac=$(mtd_get_mac_binary factory 0xe006) - ;; - xiaomi,mir3g-v2) - wan_mac=$(mtd_get_mac_binary factory 0xe006) - label_mac=$wan_mac - ;; - xiaomi,mir3p) - lan_mac=$(mtd_get_mac_binary factory 0xe006) - label_mac=$lan_mac - ;; - zbtlink,zbt-we1326) - wan_mac=$(mtd_get_mac_binary factory 0xe006) - label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) - ;; - *) - wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) - ;; - esac - - [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac - [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac - [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac -} - -board_config_update -board=$(board_name) -ramips_setup_interfaces $board -ramips_setup_macs $board -board_config_flush - -exit 0 diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..45d08043d7 --- /dev/null +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -0,0 +1,222 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +aigale,ai-br100) + ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2" + set_wifi_led "$boardname:blue:wlan" + ;; +alfa-network,ac1200rm) + set_wifi_led "$boardname:green:wlan2g" "wlan1" + ;; +alfa-network,tube-e4g) + ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" + ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0" + ;; +asus,rp-n53) + ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0" + set_wifi_led "$boardname:blue:wifi" + ;; +asus,rt-n12p) + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1 + ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2 + set_wifi_led "$boardname:green:air" + ;; +asus,rt-n14u) + ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1 + ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2 + set_wifi_led "$boardname:blue:air" + ;; +asus,rt-ac51u|\ +kingston,mlw221|\ +kingston,mlwg2|\ +sanlinking,d240) + set_wifi_led "$boardname:blue:wifi" + ;; +bdcom,wap2100-sk) + set_wifi_led "$boardname:green:wlan2g" + ;; +comfast,cf-wr800n) + ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 + set_wifi_led "$boardname:white:wifi" + ;; +dlink,dwr-116-a1|\ +head-weblink,hdrm200|\ +ohyeah,oy-0001|\ +planex,mzk-ex300np|\ +zbtlink,zbt-wr8305rt|\ +zyxel,keenetic-omni|\ +zyxel,keenetic-omni-ii|\ +zyxel,keenetic-viva) + set_wifi_led "$boardname:green:wifi" + ;; +dlink,dwr-118-a1) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20" + set_wifi_led "$boardname:green:wlan2g" "wlan1" + ;; +dlink,dwr-118-a2) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + set_wifi_led "$boardname:green:wlan2g" "wlan1" + ;; +dlink,dwr-921-c1|\ +dlink,dwr-922-e2) + set_wifi_led "$boardname:green:wifi" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" + ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link" + ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx" + ;; +dovado,tiny-ac) + set_wifi_led "$boardname:orange:wifi" + ;; +edimax,br-6478ac-v2|\ +edimax,ew-7478apc) + set_wifi_led "$boardname:blue:wlan" + ;; +edimax,ew-7476rpc|\ +edimax,ew-7478ac) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20" + ;; +elecom,wrh-300cr) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0" + ;; +engenius,esr600) + ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0" + ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1" + ;; +glinet,gl-mt300a|\ +glinet,gl-mt300n|\ +glinet,gl-mt750) + set_wifi_led "$boardname:wlan" + ;; +hiwifi,hc5661) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" + set_wifi_led "$boardname:blue:wlan2g" + ;; +hiwifi,hc5761) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01" + ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" + ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" + ;; +hiwifi,hc5861) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20" + ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0" + ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1" + ;; +hnet,c108) + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" + ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0" + ;; +iodata,wn-ac1167gr|\ +iodata,wn-ac733gr3) + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio" + ;; +kimax,u25awf-h1) + set_wifi_led "u25awf:red:wifi" + ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0" + ;; +kimax,u35wf) + set_wifi_led "$boardname:blue:wifi" + ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" + ;; +lava,lr-25g001) + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0" + ;; +lenovo,newifi-y1) + ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1" + ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0" + ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03" + ;; +lenovo,newifi-y1s) + ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1" + ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0" + ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx" + ;; +netgear,ex2700|\ +netgear,wn3000rp-v3) + set_wifi_led "$boardname:green:router" + ;; +netgear,ex3700) + ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0" + ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1" + ;; +phicomm,psg1208) + set_wifi_led "$boardname:white:wlan2g" + ;; +planex,mzk-ex750np|\ +zbtlink,zbt-we826-e) + set_wifi_led "$boardname:red:wifi" + ;; +tplink,archer-c2-v1) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" + set_wifi_led "$boardname:green:wlan" + ;; +tplink,archer-c20-v1) + ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" + ;; +tplink,archer-c20i) + ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" + ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio" + ;; +tplink,archer-c50-v1) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1 + set_wifi_led "$boardname:green:wlan5g" + ;; +tplink,archer-mr200) + ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1" + ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0" + set_wifi_led "$boardname:white:wlan" + ;; +youku,yk1) + set_wifi_led "$boardname:blue:air" + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" + ;; +zbtlink,zbt-ape522ii) + ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1" + ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx" + ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx" + ;; +zbtlink,zbt-wa05) + set_wifi_led "$boardname:blue:air" + ;; +zbtlink,zbt-we826-16m|\ +zbtlink,zbt-we826-32m) + set_wifi_led "zbt-we826:green:wifi" + ;; +zbtlink,zbt-we1026-5g-16m) + ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0" + set_wifi_led "we1026-5g:green:wifi" + ;; +zbtlink,zbt-we2026) + set_wifi_led "$boardname:green:wlan" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..db1f4de2a7 --- /dev/null +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -0,0 +1,297 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + aigale,ai-br100|\ + alfa-network,ac1200rm|\ + asus,rt-n12p|\ + dlink,dir-810l|\ + dlink,dwr-116-a1|\ + dlink,dwr-921-c1|\ + dlink,dwr-922-e2|\ + ohyeah,oy-0001|\ + phicomm,psg1208|\ + phicomm,psg1218a|\ + planex,db-wrt01|\ + planex,mzk-750dhp|\ + sanlinking,d240|\ + xiaomi,miwifi-mini|\ + youku,yk1|\ + zbtlink,zbt-ape522ii|\ + zbtlink,zbt-we826-16m|\ + zbtlink,zbt-we826-32m|\ + zbtlink,zbt-we826-e|\ + zbtlink,zbt-wr8305rt|\ + zyxel,keenetic-omni) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + alfa-network,tube-e4g|\ + buffalo,wmr-300|\ + dlink,dch-m225|\ + elecom,wrh-300cr|\ + kimax,u25awf-h1|\ + netgear,ex2700|\ + netgear,ex3700|\ + netgear,wn3000rp-v3|\ + planex,cs-qr10|\ + planex,mzk-ex300np|\ + planex,mzk-ex750np|\ + ravpower,wd03|\ + sercomm,na930) + ucidef_set_interface_lan "eth0" + ;; + asus,rp-n53) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + asus,rt-ac51u) + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + asus,rt-n14u|\ + bdcom,wap2100-sk|\ + glinet,gl-mt300a|\ + glinet,gl-mt300n|\ + glinet,gl-mt750|\ + hiwifi,hc5661|\ + tplink,archer-c20i|\ + wrtnode,wrtnode|\ + zbtlink,zbt-wa05) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + buffalo,whr-300hp2|\ + buffalo,whr-600d) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0" + ;; + buffalo,whr-1166d) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" + ;; + comfast,cf-wr800n|\ + hnet,c108) + ucidef_add_switch "switch0" \ + "4:lan" "6@eth0" + ;; + dlink,dir-510l) + ucidef_add_switch "switch0" \ + "0:lan" "6@eth0" + ;; + dlink,dwr-118-a1) + ucidef_add_switch "switch0" \ + "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0" + ;; + dlink,dwr-118-a2) + ucidef_add_switch "switch0" \ + "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0" + ;; + edimax,br-6478ac-v2|\ + tplink,archer-c2-v1) + ucidef_add_switch "switch1" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + edimax,ew-7476rpc|\ + edimax,ew-7478ac|\ + kimax,u35wf|\ + microduino,microwrt|\ + yukai,bocco|\ + zbtlink,zbt-cpe102|\ + zte,q7) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + engenius,esr600) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0" + ;; + fon,fon2601) + ucidef_add_switch "switch0" \ + "0:lan" "4:wan" "6@eth0" + ;; + head-weblink,hdrm200) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" + ;; + hiwifi,hc5761) + ucidef_add_switch "switch0" \ + "1:lan" "4:lan" "0:wan" "6@eth0" + ;; + hiwifi,hc5861) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "5:wan" "6@eth0" + ;; + iodata,wn-ac1167gr|\ + iodata,wn-ac733gr3) + ucidef_add_switch "switch1" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + kingston,mlw221) + ucidef_set_interface_lan "eth0.2" + ;; + kingston,mlwg2) + ucidef_set_interface_lan "eth0.1" + ;; + lava,lr-25g001) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" + ;; + lenovo,newifi-y1) + ucidef_add_switch "switch0" \ + "0:lan:2" "1:lan:1" "4:wan" "6@eth0" + ;; + lenovo,newifi-y1s) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0" + ;; + linksys,e1700|\ + ralink,mt7620a-mt7530-evb) + ucidef_add_switch "switch1" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + nexx,wt3020-4m|\ + nexx,wt3020-8m) + ucidef_add_switch "switch0" \ + "4:lan" "0:wan" "6@eth0" + ;; + phicomm,k2g) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" + ;; + phicomm,psg1218b) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" + ;; + tplink,archer-c20-v1|\ + tplink,archer-c50-v1) + ucidef_add_switch "switch0" \ + "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" + ;; + tplink,archer-mr200) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0" + ucidef_set_interface_wan "usb0" + ;; + vonets,var11n-300) + ucidef_add_switch "switch0" \ + "0:lan" "4:wan" "6@eth0" + ;; + zbtlink,zbt-we1026-5g-16m) + ucidef_add_switch "switch0" \ + "0:lan" "6t@eth0" + ;; + zbtlink,zbt-we2026) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; + zyxel,keenetic-omni-ii) + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0" + ;; + zyxel,keenetic-viva) + ucidef_add_switch "switch1" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + buffalo,whr-1166d|\ + buffalo,whr-300hp2|\ + buffalo,whr-600d|\ + xiaomi,miwifi-mini) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + dlink,dch-m225) + lan_mac=$(mtd_get_mac_ascii factory lanmac) + ;; + dlink,dir-510l|\ + dlink,dwr-116-a1|\ + dlink,dwr-118-a1|\ + dlink,dwr-118-a2|\ + dlink,dwr-921-c1|\ + dlink,dwr-922-e2|\ + lava,lr-25g001) + wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) + lan_mac=$(macaddr_add "$wan_mac" 1) + label_mac=$wan_mac + ;; + dovado,tiny-ac) + lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) + wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR) + ;; + edimax,br-6478ac-v2) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) + ;; + engenius,esr600) + lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + ;; + glinet,gl-mt300a|\ + glinet,gl-mt300n|\ + glinet,gl-mt750) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + hiwifi,hc5661|\ + hiwifi,hc5761|\ + hiwifi,hc5861) + lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") + label_mac=$lan_mac + [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + iodata,wn-ac1167gr|\ + iodata,wn-ac733gr3) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + ;; + lenovo,newifi-y1|\ + lenovo,newifi-y1s|\ + ohyeah,oy-0001|\ + phicomm,k2g) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + linksys,e1700) + wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) + ;; + zyxel,keenetic-omni|\ + zyxel,keenetic-omni-ii|\ + zyxel,keenetic-viva) + wan_mac=$(mtd_get_mac_binary factory 0x28) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches new file mode 100755 index 0000000000..85380d84a8 --- /dev/null +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -0,0 +1,30 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +dlink,dir-510l) + ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" + ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" + ;; +head-weblink,hdrm200) + ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0" + ucidef_add_gpio_switch "io1" "I/O 1" "1" + ucidef_add_gpio_switch "io2" "I/O 2" "2" + ucidef_add_gpio_switch "io3" "I/O 3" "11" + ucidef_add_gpio_switch "io4" "I/O 4" "14" + ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1" + ;; +zbtlink,zbt-we826-e) + ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13" + ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom similarity index 100% rename from target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom rename to target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom diff --git a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..4eab8f42fe --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -0,0 +1,83 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +d-team,newifi-d2) + ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10" + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1" + ;; +d-team,pbr-m1|\ +gehua,ghl-r-001) + ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" + ;; +dlink,dir-860l-b1) + ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" + ;; +gnubee,gb-pc1|\ +gnubee,gb-pc2) + ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10" + ;; +mikrotik,rbm11g) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100" + ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100" + ;; +mtc,wr1201) + ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f" + ;; +netgear,r6220|\ +netgear,r6260|\ +netgear,r6350|\ +netgear,r6850|\ +netgear,wndr3700-v5) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; +tplink,re350-v1|\ +tplink,re650-v1) + ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0" + ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1" + ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx" + ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01" + ;; +xiaomi,mir3g) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ;; +xiaomi,mir3p) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" + ;; +xzwifi,creativebox-v1) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" + ;; +youhua,wr1200js) + ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..11cf27e092 --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -0,0 +1,238 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + adslr,g7|\ + afoundry,ew1200|\ + d-team,pbr-m1|\ + firefly,firewrt|\ + hiwifi,hc5962|\ + mediatek,ap-mt7621a-v60|\ + mediatek,mt7621-eval-board|\ + mqmaker,witi|\ + mtc,wr1201|\ + netis,wf-2881|\ + phicomm,k2p|\ + planex,vr500|\ + samknows,whitebox-v8|\ + storylink,sap-g3200u3|\ + telco-electronics,x1|\ + totolink,a7000r|\ + unielec,u7621-06-16m|\ + unielec,u7621-06-64m|\ + xiaoyu,xy-c5|\ + xzwifi,creativebox-v1|\ + youku,yk-l2|\ + zbtlink,zbt-we1326|\ + zbtlink,zbt-we3526|\ + zbtlink,zbt-wg2626|\ + zbtlink,zbt-wg3526-16m|\ + zbtlink,zbt-wg3526-32m) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + asiarf,ap7621-001) + ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0" + ;; + asiarf,ap7621-nv1) + ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0" + ;; + asus,rt-ac57u|\ + mikrotik,rb750gr3|\ + mikrotik,rbm33g|\ + ubiquiti,edgerouterx|\ + ubiquiti,edgerouterx-sfp|\ + youhua,wr1200js) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + asus,rt-ac65p|\ + asus,rt-ac85p|\ + dlink,dir-860l-b1|\ + elecom,wrc-1167ghbk2-s|\ + elecom,wrc-1900gst|\ + elecom,wrc-2533gst|\ + iodata,wn-ax1167gr|\ + iodata,wn-gx300gr|\ + iodata,wnpr2600g) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + buffalo,wsr-1166dhp|\ + buffalo,wsr-600dhp) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0" + ;; + d-team,newifi-d2|\ + wevo,11acnas|\ + wevo,w2914ns-v2) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; + edimax,rg21s) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + gehua,ghl-r-001) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" + ;; + gnubee,gb-pc1|\ + gnubee,gb-pc2) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6@eth0" + ;; + lenovo,newifi-d1) + ucidef_add_switch "switch0" \ + "1:lan:2" "2:lan:1" "4:wan" "6@eth0" + ;; + linksys,re6500) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0" + ;; + mikrotik,rbm11g|\ + thunder,timecloud) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + netgear,ex6150|\ + tplink,re350-v1|\ + tplink,re650-v1) + ucidef_add_switch "switch0" \ + "0:lan" "6@eth0" + ;; + netgear,r6220|\ + netgear,r6260|\ + netgear,r6350|\ + netgear,r6850|\ + netgear,wndr3700-v5) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + xiaomi,mir3g) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" + ;; + xiaomi,mir3g-v2) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + xiaomi,mir3p) + ucidef_add_switch "switch0" \ + "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + asus,rt-ac57u|\ + d-team,newifi-d2|\ + d-team,pbr-m1|\ + elecom,wrc-1167ghbk2-s|\ + elecom,wrc-1900gst|\ + elecom,wrc-2533gst|\ + lenovo,newifi-d1|\ + phicomm,k2p|\ + planex,vr500|\ + samknows,whitebox-v8|\ + youhua,wr1200js|\ + youku,yk-l2|\ + zbtlink,zbt-we3526) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + ;; + asus,rt-ac65p|\ + asus,rt-ac85p) + wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + buffalo,wsr-1166dhp) + local index="$(find_mtd_index "board_data")" + wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" + lan_mac=$wan_mac + ;; + buffalo,wsr-600dhp) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + dlink,dir-860l-b1) + lan_mac=$(mtd_get_mac_ascii factory lanmac) + wan_mac=$(mtd_get_mac_ascii factory wanmac) + label_mac=$(cat /sys/class/ieee80211/phy1/macaddress) + ;; + edimax,rg21s) + lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + ;; + hiwifi,hc5962) + lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") + label_mac=$lan_mac + [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + iodata,wn-ax1167gr|\ + iodata,wn-gx300gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) + ;; + iodata,wnpr2600g) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + label_mac=$wan_mac + ;; + netgear,r6260|\ + netgear,r6350|\ + netgear,r6850) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) + ;; + xiaomi,mir3g) + lan_mac=$(mtd_get_mac_binary factory 0xe006) + ;; + xiaomi,mir3g-v2) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$wan_mac + ;; + xiaomi,mir3p) + lan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$lan_mac + ;; + zbtlink,zbt-we1326) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + zbtlink,zbt-wg3526-16m|\ + zbtlink,zbt-wg3526-32m) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches similarity index 55% rename from target/linux/ramips/base-files/etc/board.d/03_gpio_switches rename to target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index 9acd78ea0b..d3bc85f827 100755 --- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -7,18 +7,6 @@ board_config_update board=$(board_name) case "$board" in -dlink,dir-510l) - ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" - ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" - ;; -head-weblink,hdrm200) - ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0" - ucidef_add_gpio_switch "io1" "I/O 1" "1" - ucidef_add_gpio_switch "io2" "I/O 2" "2" - ucidef_add_gpio_switch "io3" "I/O 3" "11" - ucidef_add_gpio_switch "io4" "I/O 4" "14" - ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1" - ;; mikrotik,rb750gr3) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" ;; @@ -35,10 +23,6 @@ ubiquiti,edgerouterx-sfp) ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499" ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500" ;; -zbtlink,zbt-we826-e) - ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13" - ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1" - ;; esac board_config_flush diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh similarity index 91% rename from target/linux/ramips/base-files/lib/upgrade/platform.sh rename to target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 03e994dfa4..f8aa0373a0 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -39,10 +39,6 @@ platform_do_upgrade() { xiaomi,mir3p) nand_do_upgrade "$1" ;; - tplink,archer-c50-v4) - MTD_ARGS="-t romfile" - default_do_upgrade "$1" - ;; ubiquiti,edgerouterx|\ ubiquiti,edgerouterx-sfp) platform_upgrade_ubnt_erx "$1" diff --git a/target/linux/ramips/base-files/lib/upgrade/ubnt.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/ubnt.sh similarity index 100% rename from target/linux/ramips/base-files/lib/upgrade/ubnt.sh rename to target/linux/ramips/mt7621/base-files/lib/upgrade/ubnt.sh diff --git a/target/linux/ramips/base-files/sbin/fixup-mac-address b/target/linux/ramips/mt7621/base-files/sbin/fixup-mac-address similarity index 100% rename from target/linux/ramips/base-files/sbin/fixup-mac-address rename to target/linux/ramips/mt7621/base-files/sbin/fixup-mac-address diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..f397da14a3 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -0,0 +1,138 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +alfa-network,awusfree1) + set_wifi_led "$boardname:blue:wlan" + ;; +cudy,wr1000) + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" + ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04" + ;; +glinet,gl-mt300n-v2) + set_wifi_led "$boardname:red:wlan" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1" + ;; +hilink,hlk-7628n|\ +skylab,skw92a) + set_wifi_led "$boardname:green:wlan" + ;; +hiwifi,hc5661a|\ +hiwifi,hc5761a) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" + ;; +mediatek,linkit-smart-7688) + ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt" + ;; +netgear,r6120) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt" + ;; +rakwireless,rak633) + set_wifi_led "$boardname:blue:wifi" + ;; +tama,w06) + ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" + ;; +tplink,archer-c20-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" + ;; +tplink,archer-c50-v3|\ +tplink,archer-c50-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" + ;; +tplink,tl-mr3020-v3) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" + ;; +tplink,tl-mr3420-v5|\ +tplink,tl-wr842n-v5) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wa801nd-v5) + ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" + ;; +tplink,tl-wr840n-v4) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr841n-v13) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2" + ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4" + ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8" + ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr841n-v14) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr902ac-v3) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10" + ;; +unielec,u7628-01-16m) + ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2" + ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4" + ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8" + ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01" + set_wifi_led "u7628-01:green:wlan" + ;; +wavlink,wl-wn570ha1) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100" + set_wifi_led "$boardname:green:wifi" + ;; +wavlink,wl-wn575a3) + ucidef_set_rssimon "wlan1" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100" + ;; +zbtlink,zbt-we1226) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02" + ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10" + ;; +zyxel,keenetic-extra-ii) + set_wifi_led "$boardname:green:wifi" + ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..3bb5d31423 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -0,0 +1,191 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + alfa-network,awusfree1|\ + d-team,pbr-d1|\ + tama,w06|\ + tplink,tl-mr3020-v3|\ + tplink,tl-wr802n-v4) + ucidef_set_interface_lan "eth0" + ;; + buffalo,wcr-1166ds) + ucidef_add_switch "switch0" \ + "3:lan" "4:wan" "6@eth0" + ;; + cudy,wr1000) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + duzun,dm06) + ucidef_add_switch "switch0" \ + "1:lan" "0:wan" "6@eth0" + ;; + glinet,gl-mt300n-v2) + ucidef_add_switch "switch0" \ + "1:lan" "0:wan" "6@eth0" + ;; + glinet,vixmini) + ucidef_add_switch "switch0" \ + "0:lan" "6@eth0" + ;; + hilink,hlk-7628n|\ + hiwifi,hc5861b|\ + skylab,skw92a|\ + tplink,archer-c20-v4|\ + tplink,archer-c50-v3|\ + tplink,archer-c50-v4|\ + tplink,tl-mr3420-v5|\ + tplink,tl-wr840n-v4|\ + tplink,tl-wr840n-v5|\ + tplink,tl-wr841n-v13|\ + tplink,tl-wr841n-v14|\ + tplink,tl-wr842n-v5|\ + unielec,u7628-01-16m|\ + wrtnode,wrtnode2p|\ + wrtnode,wrtnode2r|\ + zyxel,keenetic-extra-ii) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + hiwifi,hc5661a|\ + hiwifi,hc5761a|\ + mediatek,mt7628an-eval-board|\ + mercury,mac1200r-v2|\ + totolink,lr1200|\ + wavlink,wl-wn570ha1|\ + wavlink,wl-wn575a3|\ + xiaomi,miwifi-nano) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + iptime,a3) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "0:wan" "6@eth0" + ;; + iptime,a604m) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + mediatek,linkit-smart-7688|\ + onion,omega2p|\ + onion,omega2|\ + tplink,tl-wa801nd-v5|\ + widora,neo-16m|\ + widora,neo-32m) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + netgear,r6120) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + rakwireless,rak633) + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + tplink,tl-wr902ac-v3) + ucidef_add_switch "switch0" \ + "4:lan" "6@eth0" + ;; + vocore,vocore2|\ + vocore,vocore2-lite) + ucidef_add_switch "switch0" \ + "0:lan" "2:lan" "6t@eth0" + ;; + wiznet,wizfi630s) + ucidef_add_switch "switch0" \ + "0:wan" "3:lan" "4:lan" "6@eth0" + ;; + xiaomi,mir4a-100m) + ucidef_add_switch "switch0" \ + "4:lan:1" "2:lan:2" "0:wan" "6@eth0" + ;; + zbtlink,zbt-we1226) + ucidef_add_switch "switch0" \ + "0:lan:2" "1:lan:1" "4:wan" "6@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + buffalo,wcr-1166ds) + local index="$(find_mtd_index "board_data")" + wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" + lan_mac=$wan_mac + ;; + cudy,wr1000) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + glinet,gl-mt300n-v2) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + hilink,hlk-7628n) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + hiwifi,hc5661a|\ + hiwifi,hc5761a|\ + hiwifi,hc5861b) + lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") + label_mac=$lan_mac + [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + iptime,a3|\ + iptime,a604m) + wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) + ;; + mediatek,linkit-smart-7688|\ + onion,omega2|\ + onion,omega2p) + wan_mac=$(mtd_get_mac_binary factory 0x4) + lan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + mercury,mac1200r-v2) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1) + ;; + skylab,skw92a|\ + totolink,lr1200) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + vocore,vocore2|\ + vocore,vocore2-lite) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..606a9f2bf6 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh @@ -0,0 +1,24 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + tplink,archer-c50-v4) + MTD_ARGS="-t romfile" + default_do_upgrade "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..a042ecfbda --- /dev/null +++ b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds @@ -0,0 +1,34 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +airlink101,ar670w|\ +airlink101,ar725w) + set_wifi_led "rt2800soc-phy0::radio" + ;; +belkin,f5d8235-v1) + set_wifi_led "$boardname:blue:wireless" + ;; +ralink,v11st-fe) + set_wifi_led "rt2800pci-phy0::radio" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/02_network b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..20b6f5317f --- /dev/null +++ b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network @@ -0,0 +1,61 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + airlink101,ar670w|\ + airlink101,ar725w) + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + asus,rt-n15) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + belkin,f5d8235-v1|\ + buffalo,wzr-agl300nh|\ + ralink,v11st-fe) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" + ;; + buffalo,wli-tx4-ag300n|\ + dlink,dap-1522-a1) + ucidef_set_interface_lan "eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..ae813e85d6 --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds @@ -0,0 +1,109 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +7links,px-4885-4m|\ +7links,px-4885-8m) + set_wifi_led "px-4885:orange:wifi" + ;; +airlive,air3gii|\ +aximcom,mr-102n|\ +edimax,3g-6200nl|\ +netgear,wnce2001) + set_wifi_led "$boardname:green:wlan" + ;; +alfa-network,w502u|\ +dlink,dir-300-b1|\ +dlink,dir-300-b7|\ +dlink,dir-320-b1|\ +dlink,dir-600-b1|\ +dlink,dir-610-a1|\ +dlink,dir-615-d|\ +dlink,dir-615-h1|\ +dlink,dir-620-a1|\ +engenius,esr-9753|\ +hilink,hlk-rm04|\ +nexx,wt1520-4m|\ +nexx,wt1520-8m|\ +skyline,sl-r7205|\ +tenda,w306r-v2|\ +zyxel,keenetic-start|\ +zyxel,keenetic|\ +zyxel,nbg-419n-v2) + set_wifi_led "rt2800pci-phy0::radio" + ;; +allnet,all0256n-4m|\ +allnet,all0256n-8m) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8" + set_wifi_led "rt2800pci-phy0::radio" + ;; +alphanetworks,asl26555-8m|\ +alphanetworks,asl26555-16m) + ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0" + set_wifi_led "asl26555:green:wlan" + ;; +asiarf,awapn2403) + set_wifi_led "rt2800soc-phy0::radio" + ;; +dlink,dcs-930l-b1) + ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" + ;; +dlink,dir-620-d1|\ +trendnet,tew-714tru) + set_wifi_led "$boardname:green:wifi" + ;; +edimax,3g-6200n|\ +planex,mzk-w300nh2) + set_wifi_led "$boardname:amber:wlan" + ;; +fon,fonera-20n) + set_wifi_led "$boardname:orange:wifi" + ;; +hauppauge,broadway) + set_wifi_led "$boardname:red:wps_active" + ;; +hootoo,ht-tm02) + ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0" + set_wifi_led "$boardname:blue:wlan" + ;; +huawei,hg255d) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2" + ;; +intenso,memory2move) + set_wifi_led "$boardname:blue:wifi" + ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0" + ;; +omnima,miniembplug) + set_wifi_led "$boardname:red:wlan" + ;; +vocore,vocore-8m|\ +vocore,vocore-16m) + ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0" + ;; +zorlik,zl5900v2) + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0 + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..326bc8a3df --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network @@ -0,0 +1,228 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_rt3x5x_vlans() +{ + if [ ! -x /sbin/swconfig ]; then + # legacy default + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + return + fi + local wanports="" + local lanports="" + for port in 5 4 3 2 1 0; do + if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then + continue + fi + if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then + wanports="$port:wan $wanports" + else + lanports="$port:lan $lanports" + fi + done + ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0" +} + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + accton,wr6202|\ + alfa-network,w502u|\ + netcore,nw718|\ + petatel,psr-680w|\ + skyline,sl-r7205|\ + upvel,ur-336un) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + allnet,all0256n-4m|\ + allnet,all0256n-8m|\ + allnet,all5002|\ + allnet,all5003|\ + dlink,dcs-930l-b1|\ + dlink,dcs-930|\ + hame,mpr-a2|\ + hauppauge,broadway|\ + hootoo,ht-tm02|\ + intenso,memory2move|\ + netgear,wnce2001|\ + tenda,3g150b|\ + tenda,3g300m|\ + tenda,w150m|\ + unbranded,a5-v11|\ + wansview,ncs601w|\ + zorlik,zl5900v2) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + alphanetworks,asl26555-8m|\ + alphanetworks,asl26555-16m) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + argus,atp-52b|\ + asiarf,awm002-evb-4m|\ + asiarf,awm002-evb-8m|\ + jcg,jhr-n805r|\ + jcg,jhr-n825r|\ + jcg,jhr-n926r|\ + planex,mzk-wdpr|\ + upvel,ur-326n4g) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + asiarf,awapn2403) + ucidef_add_switch "switch0" \ + "0:lan" "1:wan" "6@eth0" + ;; + asus,wl-330n|\ + easyacc,wizard-8800) + ucidef_set_interface_lan "eth0.1" + ;; + aximcom,mr-102n) + ucidef_set_interface_lan "eth0.2" + ;; + belkin,f5d8235-v2|\ + trendnet,tew-714tru) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" + ;; + buffalo,whr-g300n|\ + dlink,dir-300-b7|\ + dlink,dir-320-b1|\ + dlink,dir-610-a1|\ + edimax,3g-6200n|\ + hilink,hlk-rm04|\ + nixcore,x1-16m|\ + nixcore,x1-8m|\ + planex,mzk-w300nh2|\ + zyxel,keenetic) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + dlink,dir-615-h1) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; + huawei,d105) + ucidef_set_interface_lan "eth0" + ;; + huawei,hg255d) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + nexx,wt1520-4m|\ + nexx,wt1520-8m) + ucidef_add_switch "switch0" \ + "0:lan" "4:wan" "6@eth0" + ;; + planex,mzk-dp150n|\ + vocore,vocore-8m|\ + vocore,vocore-16m) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6t@eth0" + ;; + sitecom,wl-351) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + sparklan,wcr-150gn) + ucidef_add_switch "switch0" \ + "0:lan" "6t@eth0" + ;; + trendnet,tew-638apb-v2) + ucidef_add_switch "switch0" \ + "4:lan" "6@eth0" + ;; + wiznet,wizfi630a) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:wan" "6@eth0" + ;; + zyxel,keenetic-start) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0" + ;; + *) + RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo) + if [ -n "${RT3X5X}" ]; then + ramips_setup_rt3x5x_vlans + else + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + fi + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + 8devices,carambola|\ + alfa-network,w502u|\ + arcwireless,freestation5|\ + netgear,wnce2001) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + buffalo,whr-g300n|\ + zyxel,keenetic-start) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + dlink,dir-300-b7|\ + dlink,dir-320-b1|\ + dlink,dir-620-a1|\ + engenius,esr-9753|\ + hame,mpr-a1|\ + hauppauge,broadway|\ + huawei,d105|\ + hilink,hlk-rm04|\ + nexaira,bc2|\ + petatel,psr-680w|\ + skyline,sl-r7205) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + dlink,dir-615-d|\ + dlink,dir-615-h1) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + poray,m3|\ + poray,m4-4m|\ + poray,m4-8m|\ + poray,x5|\ + poray,x8) + lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2) + ;; + sparklan,wcr-150gn|\ + wiznet,wizfi630a) + wan_mac=$(mtd_get_mac_binary factory 0x28) + ;; + tenda,w306r-v2) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming similarity index 65% rename from target/linux/ramips/base-files/lib/preinit/04_handle_checksumming rename to target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming index 8f741faf9d..9a2361d057 100644 --- a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming +++ b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming @@ -35,19 +35,6 @@ do_checksumming_disable() { echo "Checksum is already zero, nothing to do." fi ;; - asus,rt-n56u) - echo "Board is ASUS RT-N56U, replacing uImage header..." - local firmware_mtd=$(find_mtd_part firmware) - local rootfs_mtd=$(find_mtd_part rootfs) - local rootfs_data_mtd=$(find_mtd_part rootfs_data) - local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}') - local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}') - local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}') - local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"') - if [ "$signature" = "27051956" ]; then - dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null - fi - ;; esac return 0 diff --git a/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..8502c8f417 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds @@ -0,0 +1,35 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +belkin,f9k1109v1) + set_usb_led "$boardname:green:usb1" + ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0" + ;; +edimax,br-6475nd) + set_wifi_led "$boardname:amber:wlan" + ;; +omnima,hpm) + ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" + set_wifi_led "$boardname:green:wifi" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..519d46aae6 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network @@ -0,0 +1,100 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + asus,rt-n56u) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" + ;; + belkin,f9k1109v1) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + dlink,dir-645) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + edimax,br-6475nd) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" + ;; + loewe,wmdr-143n|\ + omnima,hpm) + ucidef_set_interface_lan "eth0" + ;; + samsung,cy-swr1100) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" + ;; + sitecom,wlr-6000|\ + trendnet,tew-691gr|\ + trendnet,tew-692gr) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + asus,rt-n56u) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(mtd_get_mac_binary factory 0x8004) + ;; + belkin,f9k1109v1) + wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC) + lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC) + label_mac=$wan_mac + ;; + dlink,dir-645) + lan_mac=$(mtd_get_mac_ascii nvram lanmac) + wan_mac=$(mtd_get_mac_ascii nvram wanmac) + ;; + edimax,br-6475nd) + wan_mac=$(mtd_get_mac_binary devdata 0x7) + ;; + samsung,cy-swr1100) + lan_mac=$(mtd_get_mac_ascii factory lanmac) + ;; + sitecom,wlr-6000) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2) + ;; + trendnet,tew-691gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3) + ;; + trendnet,tew-692gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming new file mode 100644 index 0000000000..e2aef5f1f2 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming @@ -0,0 +1,32 @@ +#!/bin/sh + +# Netgear WNCE2001 has does a checksum check on boot and goes into recovery +# tftp mode when the check fails. Initializing the JFFS2 partition triggers +# this, so we make sure to zero checksum and size to be checksummed before +# that happens, so this needs to run very early during boot. + +do_checksumming_disable() { + . /lib/functions.sh + + local board=$(board_name) + + case "$board" in + asus,rt-n56u) + echo "Board is ASUS RT-N56U, replacing uImage header..." + local firmware_mtd=$(find_mtd_part firmware) + local rootfs_mtd=$(find_mtd_part rootfs) + local rootfs_data_mtd=$(find_mtd_part rootfs_data) + local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}') + local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}') + local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}') + local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"') + if [ "$signature" = "27051956" ]; then + dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null + fi + ;; + esac + + return 0 +} + +boot_hook_add preinit_main do_checksumming_disable diff --git a/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} -- 2.25.1