From 1767ac2d1f7fadc0780f95243906dda7553ac77a Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 10 Apr 2019 14:09:26 +0200 Subject: [PATCH] stm32mp1: ram: add support for LPDDR2/LPDDR3 Manage power supply configuration for board using stpmic1 with LPDDR2 or with LPDDR3: + VDD_DDR1 = 1.8V with BUCK3 (bypass if possible) + VDD_DDR2 = 1.2V with BUCK2 Signed-off-by: Patrick Delaunay --- arch/arm/mach-stm32mp/include/mach/ddr.h | 9 +- board/st/stm32mp1/board.c | 171 ++++++++++++++++------- drivers/ram/stm32mp1/stm32mp1_ddr.c | 11 +- drivers/ram/stm32mp1/stm32mp1_ddr_regs.h | 2 + 4 files changed, 141 insertions(+), 52 deletions(-) diff --git a/arch/arm/mach-stm32mp/include/mach/ddr.h b/arch/arm/mach-stm32mp/include/mach/ddr.h index 18575842ba..b8a17cfbdd 100644 --- a/arch/arm/mach-stm32mp/include/mach/ddr.h +++ b/arch/arm/mach-stm32mp/include/mach/ddr.h @@ -6,6 +6,13 @@ #ifndef __MACH_STM32MP_DDR_H_ #define __MACH_STM32MP_DDR_H_ -int board_ddr_power_init(void); +/* DDR power initializations */ +enum ddr_type { + STM32MP_DDR3, + STM32MP_LPDDR2, + STM32MP_LPDDR3, +}; + +int board_ddr_power_init(enum ddr_type ddr_type); #endif diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c index 5c1acca20d..c3d832f584 100644 --- a/board/st/stm32mp1/board.c +++ b/board/st/stm32mp1/board.c @@ -38,9 +38,10 @@ void board_debug_uart_init(void) #endif #ifdef CONFIG_PMIC_STPMIC1 -int board_ddr_power_init(void) +int board_ddr_power_init(enum ddr_type ddr_type) { struct udevice *dev; + bool buck3_at_1800000v = false; int ret; ret = uclass_get_device_by_driver(UCLASS_PMIC, @@ -49,53 +50,127 @@ int board_ddr_power_init(void) /* No PMIC on board */ return 0; - /* VTT = Set LDO3 to sync mode */ - ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); - if (ret < 0) - return ret; - - ret &= ~STPMIC1_LDO3_MODE; - ret &= ~STPMIC1_LDO12356_VOUT_MASK; - ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL); - - ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - ret); - if (ret < 0) - return ret; - - /* VDD_DDR = Set BUCK2 to 1.35V */ - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_VOUT_MASK, - STPMIC1_BUCK2_1350000V); - if (ret < 0) - return ret; - - /* Enable VDD_DDR = BUCK2 */ - ret = pmic_clrsetbits(dev, - STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), - STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable VREF */ - ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, - STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); - - /* Enable LDO3 */ - ret = pmic_clrsetbits(dev, - STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), - STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); - if (ret < 0) - return ret; - - mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + switch (ddr_type) { + case STM32MP_DDR3: + /* VTT = Set LDO3 to sync mode */ + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL); + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR = Set BUCK2 to 1.35V */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + STPMIC1_BUCK2_1350000V); + if (ret < 0) + return ret; + + /* Enable VDD_DDR = BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VTT = LDO3 */ + ret = pmic_clrsetbits(dev, + STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + case STM32MP_LPDDR2: + case STM32MP_LPDDR3: + /* + * configure VDD_DDR1 = LDO3 + * Set LDO3 to 1.8V + * + bypass mode if BUCK3 = 1.8V + * + normal mode if BUCK3 != 1.8V + */ + ret = pmic_reg_read(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3)); + if (ret < 0) + return ret; + + if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V) + buck3_at_1800000v = true; + + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO3_1800000; + if (buck3_at_1800000v) + ret |= STPMIC1_LDO3_MODE; + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR2 : Set BUCK2 to 1.2V */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + STPMIC1_BUCK2_1200000V); + if (ret < 0) + return ret; + + /* Enable VDD_DDR1 = LDO3 */ + ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VDD_DDR2 =BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + default: + break; + }; return 0; } diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 5e1041dffe..cfd223e37f 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -372,7 +372,7 @@ void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, } /* board-specific DDR power initializations. */ -__weak int board_ddr_power_init(void) +__weak int board_ddr_power_init(enum ddr_type ddr_type) { return 0; } @@ -382,9 +382,14 @@ void stm32mp1_ddr_init(struct ddr_info *priv, const struct stm32mp1_ddr_config *config) { u32 pir; - int ret; + int ret = -EINVAL; - ret = board_ddr_power_init(); + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + ret = board_ddr_power_init(STM32MP_DDR3); + else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2) + ret = board_ddr_power_init(STM32MP_LPDDR2); + else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3) + ret = board_ddr_power_init(STM32MP_LPDDR3); if (ret) panic("ddr power init failed\n"); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index a606b2bcbe..97f268e66d 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -234,6 +234,8 @@ struct stm32mp1_ddrphy { /* DDRCTRL REGISTERS */ #define DDRCTRL_MSTR_DDR3 BIT(0) +#define DDRCTRL_MSTR_LPDDR2 BIT(2) +#define DDRCTRL_MSTR_LPDDR3 BIT(3) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12) -- 2.25.1