From 147ba41d29c4acae9194a8662ba87ab2918e6c92 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 16 Mar 2016 07:44:38 -0600 Subject: [PATCH] x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- arch/x86/cpu/ivybridge/sdram.c | 394 +++++++-------------------------- 1 file changed, 83 insertions(+), 311 deletions(-) diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c index e0296a24b3..e35e543c3e 100644 --- a/arch/x86/cpu/ivybridge/sdram.c +++ b/arch/x86/cpu/ivybridge/sdram.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -40,57 +41,14 @@ DECLARE_GLOBAL_DATA_PTR; #define CMOS_OFFSET_MRC_SEED_S3 156 #define CMOS_OFFSET_MRC_SEED_CHK 160 -/* - * This function looks for the highest region of memory lower than 4GB which - * has enough space for U-Boot where U-Boot is aligned on a page boundary. - * It overrides the default implementation found elsewhere which simply - * picks the end of ram, wherever that may be. The location of the stack, - * the relocation address, and how far U-Boot is moved by relocation are - * set in the global data structure. - */ ulong board_get_usable_ram_top(ulong total_size) { - struct memory_info *info = &gd->arch.meminfo; - uintptr_t dest_addr = 0; - struct memory_area *largest = NULL; - int i; - - /* Find largest area of memory below 4GB */ - - for (i = 0; i < info->num_areas; i++) { - struct memory_area *area = &info->area[i]; - - if (area->start >= 1ULL << 32) - continue; - if (!largest || area->size > largest->size) - largest = area; - } - - /* If no suitable area was found, return an error. */ - assert(largest); - if (!largest || largest->size < (2 << 20)) - panic("No available memory found for relocation"); - - dest_addr = largest->start + largest->size; - - return (ulong)dest_addr; + return mrc_common_board_get_usable_ram_top(total_size); } void dram_init_banksize(void) { - struct memory_info *info = &gd->arch.meminfo; - int num_banks; - int i; - - for (i = 0, num_banks = 0; i < info->num_areas; i++) { - struct memory_area *area = &info->area[i]; - - if (area->start >= 1ULL << 32) - continue; - gd->bd->bi_dram[num_banks].start = area->start; - gd->bd->bi_dram[num_banks].size = area->size; - num_banks++; - } + mrc_common_dram_init_banksize(); } static int read_seed_from_cmos(struct pei_data *pei_data) @@ -217,164 +175,10 @@ int misc_init_r(void) return 0; } -static const char *const ecc_decoder[] = { - "inactive", - "active on IO", - "disabled on IO", - "active" -}; - -/* - * Dump in the log memory controller configuration as read from the memory - * controller registers. - */ -static void report_memory_config(void) +static void post_system_agent_init(struct udevice *dev, struct udevice *me_dev, + struct pei_data *pei_data) { - u32 addr_decoder_common, addr_decode_ch[2]; - int i; - - addr_decoder_common = readl(MCHBAR_REG(0x5000)); - addr_decode_ch[0] = readl(MCHBAR_REG(0x5004)); - addr_decode_ch[1] = readl(MCHBAR_REG(0x5008)); - - debug("memcfg DDR3 clock %d MHz\n", - (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100); - debug("memcfg channel assignment: A: %d, B % d, C % d\n", - addr_decoder_common & 3, - (addr_decoder_common >> 2) & 3, - (addr_decoder_common >> 4) & 3); - - for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { - u32 ch_conf = addr_decode_ch[i]; - debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf); - debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]); - debug(" enhanced interleave mode %s\n", - ((ch_conf >> 22) & 1) ? "on" : "off"); - debug(" rank interleave %s\n", - ((ch_conf >> 21) & 1) ? "on" : "off"); - debug(" DIMMA %d MB width x%d %s rank%s\n", - ((ch_conf >> 0) & 0xff) * 256, - ((ch_conf >> 19) & 1) ? 16 : 8, - ((ch_conf >> 17) & 1) ? "dual" : "single", - ((ch_conf >> 16) & 1) ? "" : ", selected"); - debug(" DIMMB %d MB width x%d %s rank%s\n", - ((ch_conf >> 8) & 0xff) * 256, - ((ch_conf >> 20) & 1) ? 16 : 8, - ((ch_conf >> 18) & 1) ? "dual" : "single", - ((ch_conf >> 16) & 1) ? ", selected" : ""); - } -} - -static void post_system_agent_init(struct pei_data *pei_data) -{ - /* If PCIe init is skipped, set the PEG clock gating */ - if (!pei_data->pcie_init) - setbits_le32(MCHBAR_REG(0x7010), 1); -} - -static asmlinkage void console_tx_byte(unsigned char byte) -{ -#ifdef DEBUG - putc(byte); -#endif -} - -static int recovery_mode_enabled(void) -{ - return false; -} - -/** - * Find the PEI executable in the ROM and execute it. - * - * @dev: Northbridge device - * @pei_data: configuration data for UEFI PEI reference code - */ -int sdram_initialise(struct udevice *dev, struct udevice *me_dev, - struct pei_data *pei_data) -{ - unsigned version; - const char *data; uint16_t done; - int ret; - - report_platform_info(dev); - - /* Wait for ME to be ready */ - ret = intel_early_me_init(me_dev); - if (ret) - return ret; - ret = intel_early_me_uma_size(me_dev); - if (ret < 0) - return ret; - - debug("Starting UEFI PEI System Agent\n"); - - /* - * Do not pass MRC data in for recovery mode boot, - * Always pass it in for S3 resume. - */ - if (!recovery_mode_enabled() || - pei_data->boot_mode == PEI_BOOT_RESUME) { - ret = prepare_mrc_cache(pei_data); - if (ret) - debug("prepare_mrc_cache failed: %d\n", ret); - } - - /* If MRC data is not found we cannot continue S3 resume. */ - if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) { - debug("Giving up in sdram_initialize: No MRC data\n"); - reset_cpu(0); - } - - /* Pass console handler in pei_data */ - pei_data->tx_byte = console_tx_byte; - - debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data)); - - data = (char *)CONFIG_X86_MRC_ADDR; - if (data) { - int rv; - int (*func)(struct pei_data *); - ulong start; - - debug("Calling MRC at %p\n", data); - post_code(POST_PRE_MRC); - start = get_timer(0); - func = (int (*)(struct pei_data *))data; - rv = func(pei_data); - post_code(POST_MRC); - if (rv) { - switch (rv) { - case -1: - printf("PEI version mismatch.\n"); - break; - case -2: - printf("Invalid memory frequency.\n"); - break; - default: - printf("MRC returned %x.\n", rv); - } - printf("Nonzero MRC return value.\n"); - return -EFAULT; - } - debug("MRC execution time %lu ms\n", get_timer(start)); - } else { - printf("UEFI PEI System Agent not found.\n"); - return -ENOSYS; - } - -#if CONFIG_USBDEBUG - /* mrc.bin reconfigures USB, so reinit it to have debug */ - early_usbdebug_init(); -#endif - - version = readl(MCHBAR_REG(0x5034)); - debug("System Agent Version %d.%d.%d Build %d\n", - version >> 24 , (version >> 16) & 0xff, - (version >> 8) & 0xff, version & 0xff); - debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len, - pei_data->mrc_output); /* * Send ME init done for SandyBridge here. This is done inside the @@ -387,23 +191,14 @@ int sdram_initialise(struct udevice *dev, struct udevice *me_dev, else intel_me_status(me_dev); - post_system_agent_init(pei_data); - report_memory_config(); - - /* S3 resume: don't save scrambler seed or MRC data */ - if (pei_data->boot_mode != PEI_BOOT_RESUME) { - /* - * This will be copied to SDRAM in reserve_arch(), then written - * to SPI flash in mrccache_save() - */ - gd->arch.mrc_output = (char *)pei_data->mrc_output; - gd->arch.mrc_output_len = pei_data->mrc_output_len; - ret = write_seeds_to_cmos(pei_data); - if (ret) - debug("Failed to write seeds to CMOS: %d\n", ret); - } + /* If PCIe init is skipped, set the PEG clock gating */ + if (!pei_data->pcie_init) + setbits_le32(MCHBAR_REG(0x7010), 1); +} - return 0; +static int recovery_mode_enabled(void) +{ + return false; } int reserve_arch(void) @@ -411,87 +206,16 @@ int reserve_arch(void) return mrccache_reserve(); } -static int copy_spd(struct pei_data *peid) +static int copy_spd(struct udevice *dev, struct pei_data *peid) { - const int gpio_vector[] = {41, 42, 43, 10, -1}; - int spd_index; - const void *blob = gd->fdt_blob; - int node, spd_node; - int ret, i; - - for (i = 0; ; i++) { - if (gpio_vector[i] == -1) - break; - ret = gpio_requestf(gpio_vector[i], "spd_id%d", i); - if (ret) { - debug("%s: Could not request gpio %d\n", __func__, - gpio_vector[i]); - return ret; - } - } - spd_index = gpio_get_values_as_int(gpio_vector); - debug("spd index %d\n", spd_index); - node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD); - if (node < 0) { - printf("SPD data not found.\n"); - return -ENOENT; - } - - for (spd_node = fdt_first_subnode(blob, node); - spd_node > 0; - spd_node = fdt_next_subnode(blob, spd_node)) { - const char *data; - int len; - - if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index) - continue; - data = fdt_getprop(blob, spd_node, "data", &len); - if (len < sizeof(peid->spd_data[0])) { - printf("Missing SPD data\n"); - return -EINVAL; - } - - debug("Using SDRAM SPD data for '%s'\n", - fdt_get_name(blob, spd_node, NULL)); - memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0])); - break; - } - - if (spd_node < 0) { - printf("No SPD data found for index %d\n", spd_index); - return -ENOENT; - } + const void *data; + int ret; - return 0; -} + ret = mrc_locate_spd(dev, sizeof(peid->spd_data[0]), &data); + if (ret) + return ret; -/** - * add_memory_area() - Add a new usable memory area to our list - * - * Note: @start and @end must not span the first 4GB boundary - * - * @info: Place to store memory info - * @start: Start of this memory area - * @end: End of this memory area + 1 - */ -static int add_memory_area(struct memory_info *info, - uint64_t start, uint64_t end) -{ - struct memory_area *ptr; - - if (info->num_areas == CONFIG_NR_DRAM_BANKS) - return -ENOSPC; - - ptr = &info->area[info->num_areas]; - ptr->start = start; - ptr->size = end - start; - info->total_memory += ptr->size; - if (ptr->start < (1ULL << 32)) - info->total_32bit_memory += ptr->size; - debug("%d: memory %llx size %llx, total now %llx / %llx\n", - info->num_areas, ptr->start, ptr->size, - info->total_32bit_memory, info->total_memory); - info->num_areas++; + memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0])); return 0; } @@ -610,10 +334,10 @@ static int sdram_find(struct udevice *dev) debug("Available memory below 4GB: %lluM\n", tomk >> 10); /* Report the memory regions */ - add_memory_area(info, 1 << 20, 2 << 28); - add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28); - add_memory_area(info, (4 << 28) + (2 << 20), tseg_base); - add_memory_area(info, 1ULL << 32, touud); + mrc_add_memory_area(info, 1 << 20, 2 << 28); + mrc_add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28); + mrc_add_memory_area(info, (4 << 28) + (2 << 20), tseg_base); + mrc_add_memory_area(info, 1ULL << 32, touud); /* Add MTRRs for memory */ mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30); @@ -682,7 +406,7 @@ static void rcba_config(void) int dram_init(void) { - struct pei_data pei_data __aligned(8) = { + struct pei_data _pei_data __aligned(8) = { .pei_version = PEI_VERSION, .mchbar = MCH_BASE_ADDRESS, .dmibar = DEFAULT_DMIBAR, @@ -735,6 +459,7 @@ int dram_init(void) { 0, 4, 0x0000 }, /* P13= Empty */ }, }; + struct pei_data *pei_data = &_pei_data; struct udevice *dev, *me_dev; int ret; @@ -744,27 +469,74 @@ int dram_init(void) ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev); if (ret) return ret; - debug("Boot mode %d\n", gd->arch.pei_boot_mode); - debug("mrc_input %p\n", pei_data.mrc_input); - pei_data.boot_mode = gd->arch.pei_boot_mode; - ret = copy_spd(&pei_data); - if (!ret) - ret = sdram_initialise(dev, me_dev, &pei_data); + ret = copy_spd(dev, pei_data); if (ret) return ret; + pei_data->boot_mode = gd->arch.pei_boot_mode; + debug("Boot mode %d\n", gd->arch.pei_boot_mode); + debug("mrc_input %p\n", pei_data->mrc_input); - rcba_config(); - quick_ram_check(); + /* + * Do not pass MRC data in for recovery mode boot, + * Always pass it in for S3 resume. + */ + if (!recovery_mode_enabled() || + pei_data->boot_mode == PEI_BOOT_RESUME) { + ret = prepare_mrc_cache(pei_data); + if (ret) + debug("prepare_mrc_cache failed: %d\n", ret); + } - writew(0xCAFE, MCHBAR_REG(SSKPD)); + /* If MRC data is not found we cannot continue S3 resume. */ + if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) { + debug("Giving up in sdram_initialize: No MRC data\n"); + reset_cpu(0); + } - post_code(POST_DRAM); + /* Pass console handler in pei_data */ + pei_data->tx_byte = sdram_console_tx_byte; - ret = sdram_find(dev); + /* Wait for ME to be ready */ + ret = intel_early_me_init(me_dev); if (ret) return ret; + ret = intel_early_me_uma_size(me_dev); + if (ret < 0) + return ret; + ret = mrc_common_init(dev, pei_data, false); + if (ret) + return ret; + + ret = sdram_find(dev); + if (ret) + return ret; gd->ram_size = gd->arch.meminfo.total_32bit_memory; + debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len, + pei_data->mrc_output); + + post_system_agent_init(dev, me_dev, pei_data); + report_memory_config(); + + /* S3 resume: don't save scrambler seed or MRC data */ + if (pei_data->boot_mode != PEI_BOOT_RESUME) { + /* + * This will be copied to SDRAM in reserve_arch(), then written + * to SPI flash in mrccache_save() + */ + gd->arch.mrc_output = (char *)pei_data->mrc_output; + gd->arch.mrc_output_len = pei_data->mrc_output_len; + ret = write_seeds_to_cmos(pei_data); + if (ret) + debug("Failed to write seeds to CMOS: %d\n", ret); + } + + writew(0xCAFE, MCHBAR_REG(SSKPD)); + if (ret) + return ret; + + rcba_config(); + return 0; } -- 2.25.1