From 13b36face7adebd790c0b201792ec47b77d2fb0c Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sun, 5 Aug 2018 00:40:08 +0530 Subject: [PATCH] ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3 Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Signed-off-by: Jagan Teki --- arch/arm/dts/sun5i-a10s-auxtek-t003.dts | 26 +- arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 42 +- arch/arm/dts/sun5i-a10s-mk802.dts | 24 +- arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 82 +- arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts | 24 +- arch/arm/dts/sun5i-a10s-wobo-i5.dts | 29 +- arch/arm/dts/sun5i-a10s.dtsi | 224 +--- .../dts/sun5i-a13-empire-electronix-d709.dts | 29 +- arch/arm/dts/sun5i-a13-hsg-h702.dts | 29 +- arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 164 +-- arch/arm/dts/sun5i-a13-olinuxino-micro.dts | 44 +- arch/arm/dts/sun5i-a13-olinuxino.dts | 100 +- arch/arm/dts/sun5i-a13-utoo-p66.dts | 49 +- arch/arm/dts/sun5i-a13.dtsi | 268 +--- arch/arm/dts/sun5i-gr8-chip-pro.dts | 16 +- arch/arm/dts/sun5i-gr8.dtsi | 1082 +---------------- arch/arm/dts/sun5i-r8-chip.dts | 91 +- arch/arm/dts/sun5i-r8.dtsi | 40 - .../dts/sun5i-reference-design-tablet.dtsi | 69 +- arch/arm/dts/sun5i.dtsi | 792 ++++++------ include/dt-bindings/clock/sun5i-ccu.h | 106 ++ include/dt-bindings/reset/sun5i-ccu.h | 32 + 22 files changed, 1016 insertions(+), 2346 deletions(-) create mode 100644 include/dt-bindings/clock/sun5i-ccu.h create mode 100644 include/dt-bindings/reset/sun5i-ccu.h diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts index d4ad021823..39504d720e 100644 --- a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts @@ -44,7 +44,6 @@ #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Auxtek t003 A10s hdmi tv-stick"; @@ -94,8 +93,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -109,17 +107,15 @@ &pio { mmc0_cd_pin_t003: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_t003: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -139,14 +135,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG13"; -}; - -&usb1_vbus_pin_a { - allwinner,pins = "PB10"; -}; - &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts index a790ec8adb..8d4fb93312 100644 --- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts @@ -44,7 +44,6 @@ #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Auxtek t004 A10s hdmi tv-stick"; @@ -105,8 +104,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -124,26 +122,32 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; + }; + mmc0_cd_pin_t004: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - allwinner,pins = "PB18"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB18"; + function = "gpio_out"; }; led_pins_t004: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -158,11 +162,15 @@ status = "okay"; }; -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; +&usb_otg { + dr_mode = "otg"; + status = "okay"; }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts index 23b0114eb4..dd7fd5c3d7 100644 --- a/arch/arm/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/dts/sun5i-a10s-mk802.dts @@ -92,8 +92,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -116,24 +115,19 @@ &pio { led_pins_mk802: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB10"; + function = "gpio_out"; }; }; @@ -150,7 +144,7 @@ }; &usb_otg { - dr_mode = "otg"; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index aef91476f9..2c902ed2c8 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Olimex A10s-Olinuxino Micro"; @@ -64,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -77,13 +87,17 @@ }; }; +&be0 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pins_b>; phy = <&phy1>; status = "okay"; }; @@ -92,6 +106,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -177,8 +201,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -187,8 +210,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ status = "okay"; }; @@ -202,38 +224,32 @@ &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG13"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PE3"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB10"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -250,8 +266,12 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; + status = "okay"; +}; + +&tcon0 { status = "okay"; }; @@ -263,7 +283,7 @@ &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pins_b>; status = "okay"; }; @@ -278,10 +298,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG11"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts index 3b057983c7..034853d1c0 100644 --- a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "R7 A10s hdmi tv-stick"; @@ -81,8 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -101,24 +99,20 @@ &pio { mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts index b5de75f4c7..3f68ef5d92 100644 --- a/arch/arm/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "A10s-Wobo i5"; @@ -95,7 +94,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_b>; + pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -131,8 +130,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - cd-inverted; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */ status = "okay"; }; @@ -146,24 +144,19 @@ &pio { led_pins_wobo_i5: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB3"; + function = "gpio_in"; + bias-pull-up; }; emac_power_pin_wobo: emac_power_pin@0 { - allwinner,pins = "PA02"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA02"; + function = "gpio_out"; }; }; @@ -222,10 +215,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - allwinner,pins = "PG12"; -}; - &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index c41a2ba34d..316cb8b294 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -47,7 +47,6 @@ #include "sun5i.dtsi" #include -#include / { interrupt-parent = <&intc>; @@ -61,207 +60,118 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer@2 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>; - status = "disabled"; - }; - - framebuffer@1 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>, + <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>; status = "disabled"; }; + }; - framebuffer@2 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, - <&ahb_gates 36>, <&ahb_gates 44>; - status = "disabled"; - }; + display-engine { + compatible = "allwinner,sun5i-a10s-display-engine"; + allwinner,pipelines = <&fe0>; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <18>, - <20>, <21>, <22>, - <26>, <28>, <32>, - <34>, <36>, <40>, - <43>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", - "ahb_hdmi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; + soc@1c00000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>, - <10>; - clock-output-names = "apb0_codec", "apb0_iis", - "apb0_pio", "apb0_ir", - "apb0_keypad"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <16>, - <17>, <18>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3"; - }; - }; + hdmi_in: port@0 { + reg = <0>; - soc@01c00000 { - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; - allwinner,sram = <&emac_sram 1>; - status = "disabled"; - }; + hdmi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; - mdio: mdio@01c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 16>; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 18>; - status = "disabled"; - }; }; }; +&ccu { + compatible = "allwinner,sun5i-a10s-ccu"; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB19", "PB20"; + function = "uart0"; }; - uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; + uart2_pins_b: uart2@1 { + pins = "PC18", "PC19"; + function = "uart2"; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", + emac_pins_b: emac0@1 { + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; - }; - - emac_pins_b: emac0@1 { - allwinner,pins = "PD6", "PD7", "PD10", - "PD11", "PD12", "PD13", "PD14", - "PD15", "PD18", "PD19", "PD20", - "PD21", "PD22", "PD23", "PD24", - "PD25", "PD26", "PD27"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; + function = "emac"; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3", "PG4", "PG5", + pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; - allwinner,function = "mmc1"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc1"; + drive-strength = <30>; }; - spi2_pins_a: spi2@0 { - allwinner,pins = "PB12", "PB13", "PB14"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + spi2_pins_b: spi2@1 { + pins = "PB12", "PB13", "PB14"; + function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PB11"; - allwinner,function = "spi2"; - allwinner,drive = ; - allwinner,pull = ; + spi2_cs0_pins_b: spi2_cs0@1 { + pins = "PB11"; + function = "spi2"; }; }; &sram_a { - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; +}; + +&tcon0_out { + tcon0_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; }; }; diff --git a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts index 6efbba6d40..378214d831 100644 --- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts @@ -46,7 +46,6 @@ #include #include #include -#include #include / { @@ -126,8 +125,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; @@ -137,24 +135,21 @@ &pio { mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -211,10 +206,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/dts/sun5i-a13-hsg-h702.dts b/arch/arm/dts/sun5i-a13-hsg-h702.dts index 3724b98806..7ee0c3f6d7 100644 --- a/arch/arm/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/dts/sun5i-a13-hsg-h702.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "HSG H702"; @@ -121,8 +120,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; @@ -136,24 +134,20 @@ &pio { mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; }; }; @@ -191,7 +185,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ status = "okay"; }; @@ -207,10 +200,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts index 1b11ec95ae..439ae3b537 100644 --- a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts +++ b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts @@ -42,171 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include -#include +#include "sun5i-reference-design-tablet.dtsi" / { model = "INet-98V Rev 02"; compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts index 081329e2b8..aa4b34fd91 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts @@ -46,7 +46,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Olimex A13-Olinuxino Micro"; @@ -100,8 +99,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; @@ -115,45 +113,37 @@ &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG12"; + function = "gpio_out"; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts index b3c234c65e..437ad913a3 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino.dts @@ -48,7 +48,6 @@ #include #include -#include / { model = "Olimex A13-Olinuxino"; @@ -72,6 +71,51 @@ default-state = "on"; }; }; + + bridge { + compatible = "dumb-vga-dac"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; +}; + +&be0 { + status = "okay"; +}; + +&codec { + status = "okay"; }; &ehci0 { @@ -150,8 +194,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; @@ -165,38 +208,32 @@ &pio { mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG11"; + function = "gpio_out"; }; }; @@ -211,6 +248,19 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; @@ -222,10 +272,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index a8b0bcc045..bfdd38d6bf 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -80,23 +80,7 @@ }; &codec_pa_pin { - allwinner,pins = "PG3"; -}; - -&i2c1 { - icn8318: touchscreen@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; + pins = "PG3"; }; &mmc2 { @@ -116,30 +100,35 @@ &pio { i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PG10", "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ts_wake_pin_p66: ts_wake_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG10", "PG12"; + function = "gpio_out"; + bias-pull-up; }; - }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; +&touchscreen { + compatible = "chipone,icn8318"; + reg = <0x40>; + /* The P66 uses a different EINT then the reference design */ + interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + /* The icn8318 binding expects wake-gpios instead of power-gpios */ + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "okay"; +}; + &uart1 { /* The P66 uses the uart pins as gpios */ status = "disabled"; }; &usb0_vbus_pin_a { - allwinner,pins = "PB4"; + pins = "PB4"; }; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index e012890e0c..b1d8277655 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -46,27 +46,11 @@ #include "sun5i.dtsi" -#include #include / { interrupt-parent = <&intc>; - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch0_clk>, <&dram_gates 26>; - status = "disabled"; - }; - }; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -84,7 +68,7 @@ trips { cpu_alert0: cpu_alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; @@ -99,237 +83,27 @@ }; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <5>, - <6>; - clock-output-names = "apb0_codec", "apb0_pio", - "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - }; - display-engine { compatible = "allwinner,sun5i-a13-display-engine"; allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - }; - }; - - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - status = "disabled"; - - assigned-clocks = <&de_be_clk>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; }; }; +&ccu { + compatible = "allwinner,sun5i-a13-ccu"; +}; + &cpu0 { clock-latency = <244144>; /* 8 32k periods */ operating-points = < @@ -342,34 +116,8 @@ 432000 1200000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <5>; }; &pio { compatible = "allwinner,sun5i-a13-pinctrl"; - - lcd_rgb666_pins: lcd_rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; }; diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts index 92a2dc6250..c55b11a4d3 100644 --- a/arch/arm/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts @@ -159,23 +159,19 @@ &pio { usb0_id_pin_chip_pro: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; }; wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB10"; + function = "gpio_out"; }; }; &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>; + pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; status = "disabled"; }; @@ -224,7 +220,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-gr8.dtsi b/arch/arm/dts/sun5i-gr8.dtsi index ea86d4d58d..ef0b7446a9 100644 --- a/arch/arm/dts/sun5i-gr8.dtsi +++ b/arch/arm/dts/sun5i-gr8.dtsi @@ -42,901 +42,33 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include "sun5i.dtsi" + +#include #include -#include +#include / { - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&cpu>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc3M: osc3M-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_hstimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>; - clock-output-names = "apb0_codec", "apb0_i2s0", - "apb0_pio", "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <18>, <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "nextthing,gr8-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; - }; - display-engine { compatible = "allwinner,sun5i-a13-display-engine"; allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram-controller@01c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@00000000 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - }; - - sram_d: sram@00010000 { - compatible = "mmio-sram"; - reg = <0x00010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00010000 0x1000>; - - otg_sram: sram-section@0000 { - compatible = "allwinner,sun4i-a10-sram-d"; - reg = <0x0000 0x1000>; - status = "disabled"; - }; - }; - }; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - nfc: nand@01c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 3>; - dma-names = "rxtx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - tve0: tv-encoder@01c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; - status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; - }; - - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <33>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usb_otg: usb@01c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - allwinner,sram = <&otg_sram 1>; - status = "disabled"; - - dr_mode = "otg"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "nextthing,gr8-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <3>; - #gpio-cells = <3>; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2s0_data_pins_a: i2s0-data@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB5"; - allwinner,function = "i2s0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_pins_a: nand-base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", - "PC5", "PC8", "PC9", "PC10", - "PC11", "PC12", "PC13", "PC14", - "PC15"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_cs0_pins_a: nand-cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - nand_rb0_pins_a: nand-rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - pwm1_pins: pwm1 { - allwinner,pins = "PG13"; - allwinner,function = "pwm1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB10"; - allwinner,function = "spdif"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_pins_a: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_cts_rts_pins_a: uart1-cts-rts@0 { - allwinner,pins = "PG5", "PG6"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart2_pins_a: uart2@1 { - allwinner,pins = "PD2", "PD3"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart2_cts_rts_pins_a: uart2-cts-rts@0 { - allwinner,pins = "PD4", "PD5"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart3_pins_a: uart3@1 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart3_cts_rts_pins_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -944,189 +76,51 @@ status = "disabled"; }; - ir0: ir@01c21800 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; - clock-names = "apb", "ir"; - interrupts = <5>; - reg = <0x01c21800 0x40>; - status = "disabled"; - }; - - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = <16>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; dma-names = "rx", "tx"; status = "disabled"; }; + }; +}; - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - codec: codec@01c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-codec"; - reg = <0x01c22c00 0x40>; - interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; - clock-names = "apb", "codec"; - dmas = <&dma SUN4I_DMA_NORMAL 19>, - <&dma SUN4I_DMA_NORMAL 19>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 18>; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; - - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - status = "disabled"; +&ccu { + compatible = "nextthing,gr8-ccu"; +}; - assigned-clocks = <&de_be_clk>; - assigned-clock-rates = <300000000>; +&pio { + compatible = "nextthing,gr8-pinctrl"; - ports { - #address-cells = <1>; - #size-cells = <0>; + i2s0_data_pins_a: i2s0-data@0 { + pins = "PB6", "PB7", "PB8", "PB9"; + function = "i2s0"; + }; - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; + i2s0_mclk_pins_a: i2s0-mclk@0 { + pins = "PB5"; + function = "i2s0"; + }; - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; + pwm1_pins: pwm1 { + pins = "PG13"; + function = "pwm1"; + }; - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; + spdif_tx_pins_a: spdif@0 { + pins = "PB10"; + function = "spdif"; + bias-pull-up; + }; - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; + uart1_cts_rts_pins_a: uart1-cts-rts@0 { + pins = "PG5", "PG6"; + function = "uart1"; }; }; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index 7a8cc27279..879a4b0f3b 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -56,25 +56,39 @@ aliases { i2c0 = &i2c0; + i2c1 = &i2c1; i2c2 = &i2c2; serial0 = &uart1; serial1 = &uart3; + spi0 = &spi2; }; chosen { stdout-path = "serial0:115200n8"; }; - wifi_reg_on: wifi_reg_on { - compatible = "regulator-fixed"; + leds { + compatible = "gpio-leds"; + + status { + label = "chip:white:status"; + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc0_pwrseq: mmc0_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; pinctrl-0 = <&chip_wifi_reg_on_pin>; + reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ + }; - regulator-name = "wifi-reg-on"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>; /* PC19 */ - enable-active-high; + onewire { + compatible = "w1-gpio"; + gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + pinctrl-names = "default"; + pinctrl-0 = <&chip_w1_pin>; }; }; @@ -114,6 +128,20 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -134,13 +162,14 @@ }; &mmc0_pins_a { - allwinner,pull = ; + bias-pull-up; }; &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; - vmmc-supply = <&wifi_reg_on>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; non-removable; status = "okay"; @@ -156,24 +185,24 @@ &pio { chip_vbus_pin: chip_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB10"; + function = "gpio_out"; }; chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - allwinner,pins = "PC19"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC19"; + function = "gpio_out"; }; chip_id_det_pin: chip_id_det_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + }; + + chip_w1_pin: chip_w1_pin@0 { + pins = "PD2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -202,17 +231,25 @@ regulator-always-on; }; +/* + * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT + * Chip. + * + * If those are not enabled, the SDIO part will not enumerate, and + * since there's no way currently to pass DT infos to an SDIO device, + * we cannot really do better than this ugly hack for now. + */ ®_ldo3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vdd-wifi1"; + regulator-name = "vcc-wifi-1"; regulator-always-on; }; ®_ldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vdd-wifi2"; + regulator-name = "vcc-wifi-2"; regulator-always-on; }; @@ -229,6 +266,12 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "disabled"; +}; + &tcon0 { status = "okay"; }; @@ -246,7 +289,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins_a>, - <&uart3_pins_cts_rts_a>; + <&uart3_cts_rts_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-r8.dtsi b/arch/arm/dts/sun5i-r8.dtsi index 8b058f53b7..de35dbcd11 100644 --- a/arch/arm/dts/sun5i-r8.dtsi +++ b/arch/arm/dts/sun5i-r8.dtsi @@ -45,43 +45,3 @@ #include "sun5i-a13.dtsi" -/ { - chosen { - framebuffer@1 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch1_clk>, <&dram_gates 26>; - status = "disabled"; - }; - }; - - soc@01c00000 { - tve0: tv-encoder@01c0a000 { - compatible = "allwinner,sun4i-a10-tv-encoder"; - reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; - status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - tve0_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_tve0>; - }; - }; - }; - }; -}; - -&tcon0_out { - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; -}; diff --git a/arch/arm/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/dts/sun5i-reference-design-tablet.dtsi index 20cc940f5f..8acbaab14f 100644 --- a/arch/arm/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/dts/sun5i-reference-design-tablet.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-reference-design-tablet.dtsi" +#include #include / { @@ -84,6 +85,23 @@ }; &i2c1 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * All other devices on this bus are also rated for 400KHz. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen { + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -92,6 +110,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &lradc { vref-supply = <®_ldo2>; }; @@ -101,8 +127,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; @@ -112,38 +137,38 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG10"; + function = "gpio_out"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; + }; + + ts_power_pin: ts_power_pin { + pins = "PB3"; + function = "gpio_out"; + drive-strength = <10>; + bias-disable; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index e374f4fc80..07f2248ed5 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -44,9 +44,9 @@ #include "skeleton.dtsi" -#include +#include #include -#include +#include / { interrupt-parent = <&intc>; @@ -59,42 +59,45 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; }; }; - clocks { + chosen { #address-cells = <1>; #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; + status = "disabled"; }; - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; + status = "disabled"; }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; + osc24M: clk@1c20050 { #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; }; osc32k: clk@0 { @@ -103,272 +106,22 @@ clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -376,14 +129,20 @@ ranges = <0 0x00000000 0xc000>; }; - sram_d: sram@00010000 { + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -391,19 +150,32 @@ }; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - spi0: spi@01c05000 { + nfc: nand@1c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -413,11 +185,11 @@ #size-cells = <0>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -427,61 +199,122 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { + tve0: tv-encoder@1c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + + emac: ethernet@1c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ccu CLK_AHB_EMAC>; + allwinner,sram = <&emac_sram 1>; + status = "disabled"; + }; + + mdio: mdio@1c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_LCD>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -491,43 +324,52 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - spi2: spi@01c17000 { + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun5i-a13-crypto", + "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <54>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; + clock-names = "ahb", "mod"; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -537,107 +379,199 @@ #size-cells = <0>; }; - intc: interrupt-controller@01c20400 { + ccu: clock@1c20000 { + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + emac_pins_a: emac0@0 { + pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + function = "emac"; + }; + i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB17", "PB18"; + function = "i2c2"; + }; + + ir0_rx_pins_a: ir0@0 { + pins = "PB4"; + function = "ir0"; + }; + + lcd_rgb565_pins: lcd_rgb565@0 { + pins = "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + lcd_rgb666_pins: lcd_rgb666@0 { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + nand_pins_a: nand-base0@0 { + pins = "PC0", "PC1", "PC2", + "PC5", "PC8", "PC9", "PC10", + "PC11", "PC12", "PC13", "PC14", + "PC15"; + function = "nand0"; + }; + + nand_cs0_pins_a: nand-cs@0 { + pins = "PC4"; + function = "nand0"; + }; + + nand_rb0_pins_a: nand-rb@0 { + pins = "PC6"; + function = "nand0"; + }; + + spi2_pins_a: spi2@0 { + pins = "PE1", "PE2", "PE3"; + function = "spi2"; + }; + + spi2_cs0_pins_a: spi2-cs0@0 { + pins = "PE0"; + function = "spi2"; + }; + + uart1_pins_a: uart1@0 { + pins = "PE10", "PE11"; + function = "uart1"; + }; + + uart1_pins_b: uart1@1 { + pins = "PG3", "PG4"; + function = "uart1"; + }; + + uart2_pins_a: uart2@0 { + pins = "PD2", "PD3"; + function = "uart2"; + }; + + uart2_cts_rts_pins_a: uart2-cts-rts@0 { + pins = "PD4", "PD5"; + function = "uart2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG9", "PG10"; + function = "uart3"; }; - uart3_pins_cts_rts_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; + uart3_cts_rts_pins_a: uart3-cts-rts@0 { + pins = "PG11", "PG12"; + function = "uart3"; }; pwm0_pins: pwm0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PB2"; + function = "pwm"; }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - lradc: lradc@01c22800 { + ir0: ir@1c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; + clock-names = "apb", "ir"; + interrupts = <5>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -645,73 +579,163 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; }; - uart1: serial@01c28400 { + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB1_UART0>; + status = "disabled"; + }; + + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB1_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - timer@01c60000 { + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; + }; + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE>; + status = "disabled"; + + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; }; }; }; diff --git a/include/dt-bindings/clock/sun5i-ccu.h b/include/dt-bindings/clock/sun5i-ccu.h new file mode 100644 index 0000000000..81f34d477a --- /dev/null +++ b/include/dt-bindings/clock/sun5i-ccu.h @@ -0,0 +1,106 @@ +/* + * Copyright 2016 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_SUN5I_H_ +#define _DT_BINDINGS_CLK_SUN5I_H_ + +#define CLK_HOSC 1 + +#define CLK_PLL_VIDEO0_2X 9 + +#define CLK_PLL_VIDEO1_2X 16 +#define CLK_CPU 17 + +#define CLK_AHB_OTG 23 +#define CLK_AHB_EHCI 24 +#define CLK_AHB_OHCI 25 +#define CLK_AHB_SS 26 +#define CLK_AHB_DMA 27 +#define CLK_AHB_BIST 28 +#define CLK_AHB_MMC0 29 +#define CLK_AHB_MMC1 30 +#define CLK_AHB_MMC2 31 +#define CLK_AHB_NAND 32 +#define CLK_AHB_SDRAM 33 +#define CLK_AHB_EMAC 34 +#define CLK_AHB_TS 35 +#define CLK_AHB_SPI0 36 +#define CLK_AHB_SPI1 37 +#define CLK_AHB_SPI2 38 +#define CLK_AHB_GPS 39 +#define CLK_AHB_HSTIMER 40 +#define CLK_AHB_VE 41 +#define CLK_AHB_TVE 42 +#define CLK_AHB_LCD 43 +#define CLK_AHB_CSI 44 +#define CLK_AHB_HDMI 45 +#define CLK_AHB_DE_BE 46 +#define CLK_AHB_DE_FE 47 +#define CLK_AHB_IEP 48 +#define CLK_AHB_GPU 49 +#define CLK_APB0_CODEC 50 +#define CLK_APB0_SPDIF 51 +#define CLK_APB0_I2S 52 +#define CLK_APB0_PIO 53 +#define CLK_APB0_IR 54 +#define CLK_APB0_KEYPAD 55 +#define CLK_APB1_I2C0 56 +#define CLK_APB1_I2C1 57 +#define CLK_APB1_I2C2 58 +#define CLK_APB1_UART0 59 +#define CLK_APB1_UART1 60 +#define CLK_APB1_UART2 61 +#define CLK_APB1_UART3 62 +#define CLK_NAND 63 +#define CLK_MMC0 64 +#define CLK_MMC1 65 +#define CLK_MMC2 66 +#define CLK_TS 67 +#define CLK_SS 68 +#define CLK_SPI0 69 +#define CLK_SPI1 70 +#define CLK_SPI2 71 +#define CLK_IR 72 +#define CLK_I2S 73 +#define CLK_SPDIF 74 +#define CLK_KEYPAD 75 +#define CLK_USB_OHCI 76 +#define CLK_USB_PHY0 77 +#define CLK_USB_PHY1 78 +#define CLK_GPS 79 +#define CLK_DRAM_VE 80 +#define CLK_DRAM_CSI 81 +#define CLK_DRAM_TS 82 +#define CLK_DRAM_TVE 83 +#define CLK_DRAM_DE_FE 84 +#define CLK_DRAM_DE_BE 85 +#define CLK_DRAM_ACE 86 +#define CLK_DRAM_IEP 87 +#define CLK_DE_BE 88 +#define CLK_DE_FE 89 +#define CLK_TCON_CH0 90 + +#define CLK_TCON_CH1 92 +#define CLK_CSI 93 +#define CLK_VE 94 +#define CLK_CODEC 95 +#define CLK_AVS 96 +#define CLK_HDMI 97 +#define CLK_GPU 98 + +#define CLK_IEP 100 + +#endif /* _DT_BINDINGS_CLK_SUN5I_H_ */ diff --git a/include/dt-bindings/reset/sun5i-ccu.h b/include/dt-bindings/reset/sun5i-ccu.h new file mode 100644 index 0000000000..c2b9726b50 --- /dev/null +++ b/include/dt-bindings/reset/sun5i-ccu.h @@ -0,0 +1,32 @@ +/* + * Copyright 2016 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _RST_SUN5I_H_ +#define _RST_SUN5I_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_GPS 2 +#define RST_DE_BE 3 +#define RST_DE_FE 4 +#define RST_TVE 5 +#define RST_LCD 6 +#define RST_CSI 7 +#define RST_VE 8 +#define RST_GPU 9 +#define RST_IEP 10 + +#endif /* _RST_SUN5I_H_ */ -- 2.25.1