From 133815ad8f5641d2728fe3925a6bab1663fd7399 Mon Sep 17 00:00:00 2001 From: Kristian Evensen Date: Tue, 12 Sep 2017 18:27:10 +0200 Subject: [PATCH] ramips: fix D240 mini-PCIe power control GPIOs In commit b11c51916cb9 ("ramips: Improve Sanlinking D240 config") I made a mistake with regards GPIO numbering. And in addition to specifying the wrong GPIO for controling the power of one of the mini-PCIe, I recently discovered that the power of both slots can be controlled. This patch specifies the correct GPIO for the left-most mini-PCIe slot of the D240 (labeled power_mpcie2 since the slot is attached to SIM2), and adds a GPIO that can be used to control the power of the other mini-PCIe slot (labeled power_mpcie1). Signed-off-by: Kristian Evensen [do not use the gpio active macros for the gpio-export value] Signed-off-by: Mathias Kresin --- target/linux/ramips/dts/D240.dts | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/target/linux/ramips/dts/D240.dts b/target/linux/ramips/dts/D240.dts index 4f3da8d316..392e92d466 100644 --- a/target/linux/ramips/dts/D240.dts +++ b/target/linux/ramips/dts/D240.dts @@ -52,9 +52,16 @@ power_mpcie2 { gpio-export,name = "power_mpcie2"; - gpio-export,output = ; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + gpio-export,output = <1>; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; }; + + power_mpcie1 { + gpio-export,name = "power_mpcie1"; + gpio-export,output = <1>; + gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; + }; gpio-leds { @@ -94,6 +101,10 @@ status = "okay"; }; +&gpio2 { + status = "okay"; +}; + &gpio3 { status = "okay"; }; @@ -157,7 +168,7 @@ &pinctrl { state_default: pinctrl0 { default { - ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa", "nd_sd"; ralink,function = "gpio"; }; }; -- 2.25.1