From 13194f3b5f51d104bdfdd7ff5a7556136b6dc35c Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 14 Sep 2013 14:02:46 +0530 Subject: [PATCH] USB: XHCI: Add xHCI host controller support for Exynos5 This adds driver layer for xHCI controller in Samsung's exynos5 soc. This interacts with xHCI host controller stack. Signed-off-by: Vikas C Sajjan Signed-off-by: Vivek Gautam Cc: Julius Werner Cc: Simon Glass Cc: Minkyu Kang Cc: Dan Murphy Cc: Marek Vasut --- arch/arm/include/asm/arch-exynos/cpu.h | 8 + .../arm/include/asm/arch-exynos/xhci-exynos.h | 88 +++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-exynos5.c | 316 ++++++++++++++++++ include/linux/usb/dwc3.h | 188 +++++++++++ 5 files changed, 601 insertions(+) create mode 100644 arch/arm/include/asm/arch-exynos/xhci-exynos.h create mode 100644 drivers/usb/host/xhci-exynos5.c create mode 100644 include/linux/usb/dwc3.h diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 4b67191c07..b4ef03e8a1 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -51,6 +51,8 @@ #define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_AUDIOSS_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_USB3PHY_BASE DEVICE_NOT_AVAILABLE /* EXYNOS4X12 */ #define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 @@ -87,6 +89,8 @@ #define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_AUDIOSS_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_USB3PHY_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 @@ -106,6 +110,8 @@ #define EXYNOS5_DMC_CTRL_BASE 0x10DD0000 #define EXYNOS5_GPIO_PART1_BASE 0x11400000 #define EXYNOS5_MIPI_DSIM_BASE 0x11D00000 +#define EXYNOS5_USB_HOST_XHCI_BASE 0x12000000 +#define EXYNOS5_USB3PHY_BASE 0x12100000 #define EXYNOS5_USB_HOST_EHCI_BASE 0x12110000 #define EXYNOS5_USBPHY_BASE 0x12130000 #define EXYNOS5_USBOTG_BASE 0x12140000 @@ -220,7 +226,9 @@ SAMSUNG_BASE(swreset, SWRESET) SAMSUNG_BASE(timer, PWMTIMER_BASE) SAMSUNG_BASE(uart, UART_BASE) SAMSUNG_BASE(usb_phy, USBPHY_BASE) +SAMSUNG_BASE(usb3_phy, USB3PHY_BASE) SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE) +SAMSUNG_BASE(usb_xhci, USB_HOST_XHCI_BASE) SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) SAMSUNG_BASE(power, POWER_BASE) diff --git a/arch/arm/include/asm/arch-exynos/xhci-exynos.h b/arch/arm/include/asm/arch-exynos/xhci-exynos.h new file mode 100644 index 0000000000..92b90a462c --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/xhci-exynos.h @@ -0,0 +1,88 @@ +/* Copyright (c) 2012 Samsung Electronics Co. Ltd + * + * Exynos Phy register definitions + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_XHCI_EXYNOS_H_ +#define _ASM_ARCH_XHCI_EXYNOS_H_ + +/* Phy register MACRO definitions */ + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) + +#define PHYUTMI_OTGDISABLE (1 << 6) +#define PHYUTMI_FORCESUSPEND (1 << 1) +#define PHYUTMI_FORCESLEEP (1 << 0) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN (0x1 << 20) +#define PHYCLKRST_REF_SSP_EN (0x1 << 19) +#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_MASK (0x3f << 5) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN (0x1 << 4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET (0x1 << 1) +#define PHYCLKRST_COMMONONN (0x1 << 0) + +#define PHYPARAM0_REF_USE_PAD (0x1 << 31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define PHYTEST_POWERDOWN_SSP (0x1 << 3) +#define PHYTEST_POWERDOWN_HSP (0x1 << 2) + +#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) + +#define FSEL_CLKSEL_24M (0x5) + +/* XHCI PHY register structure */ +struct exynos_usb3_phy { + unsigned int reserve1; + unsigned int link_system; + unsigned int phy_utmi; + unsigned int phy_pipe; + unsigned int phy_clk_rst; + unsigned int phy_reg0; + unsigned int phy_reg1; + unsigned int phy_param0; + unsigned int phy_param1; + unsigned int phy_term; + unsigned int phy_test; + unsigned int phy_adp; + unsigned int phy_batchg; + unsigned int phy_resume; + unsigned int reserve2[3]; + unsigned int link_port; +}; + +#endif /* _ASM_ARCH_XHCI_EXYNOS_H_ */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 6bd6c861fc..eb50bc1416 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o # xhci COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o +COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c new file mode 100644 index 0000000000..eb0ef6c57d --- /dev/null +++ b/drivers/usb/host/xhci-exynos5.c @@ -0,0 +1,316 @@ +/* + * SAMSUNG EXYNOS5 USB HOST XHCI Controller + * + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Vivek Gautam + * Vikas Sajjan + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file is a conglomeration for DWC3-init sequence and further + * exynos5 specific PHY-init sequence. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "xhci.h" + +/* Declare global data pointer */ +DECLARE_GLOBAL_DATA_PTR; + +/** + * Contains pointers to register base addresses + * for the usb controller. + */ +struct exynos_xhci { + struct exynos_usb3_phy *usb3_phy; + struct xhci_hccr *hcd; + struct dwc3 *dwc3_reg; +}; + +static struct exynos_xhci exynos; + +#ifdef CONFIG_OF_CONTROL +static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos) +{ + fdt_addr_t addr; + unsigned int node; + int depth; + + node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_XHCI); + if (node <= 0) { + debug("XHCI: Can't get device node for xhci\n"); + return -ENODEV; + } + + /* + * Get the base address for XHCI controller from the device node + */ + addr = fdtdec_get_addr(blob, node, "reg"); + if (addr == FDT_ADDR_T_NONE) { + debug("Can't get the XHCI register base address\n"); + return -ENXIO; + } + exynos->hcd = (struct xhci_hccr *)addr; + + depth = 0; + node = fdtdec_next_compatible_subnode(blob, node, + COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth); + if (node <= 0) { + debug("XHCI: Can't get device node for usb3-phy controller\n"); + return -ENODEV; + } + + /* + * Get the base address for usbphy from the device node + */ + exynos->usb3_phy = (struct exynos_usb3_phy *)fdtdec_get_addr(blob, node, + "reg"); + if (exynos->usb3_phy == NULL) { + debug("Can't get the usbphy register address\n"); + return -ENXIO; + } + + return 0; +} +#endif + +static void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy) +{ + u32 reg; + + /* enabling usb_drd phy */ + set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN); + + /* Reset USB 3.0 PHY */ + writel(0x0, &phy->phy_reg0); + + clrbits_le32(&phy->phy_param0, + /* Select PHY CLK source */ + PHYPARAM0_REF_USE_PAD | + /* Set Loss-of-Signal Detector sensitivity */ + PHYPARAM0_REF_LOSLEVEL_MASK); + setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL); + + writel(0x0, &phy->phy_resume); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + setbits_le32(&phy->link_system, + LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20)); + + /* Set Tx De-Emphasis level */ + clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK); + setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH); + + setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL); + + /* PHYTEST POWERDOWN Control */ + clrbits_le32(&phy->phy_test, + PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi); + + /* Use core clock from main PLL */ + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | + /* Default 24Mhz crystal clock */ + PHYCLKRST_FSEL(FSEL_CLKSEL_24M) | + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88) | + /* Force PortReset of PHY */ + PHYCLKRST_PORTRESET | + /* Digital power supply in normal operating mode */ + PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN; + + writel(reg, &phy->phy_clk_rst); + + /* giving time to Phy clock to settle before resetting */ + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, &phy->phy_clk_rst); +} + +static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy) +{ + setbits_le32(&phy->phy_utmi, + PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP); + + clrbits_le32(&phy->phy_clk_rst, + PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + + /* PHYTEST POWERDOWN Control to remove leakage current */ + setbits_le32(&phy->phy_test, + PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + + /* disabling usb_drd phy */ + set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE); +} + +void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) +{ + clrsetbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), + DWC3_GCTL_PRTCAPDIR(mode)); +} + +static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) +{ + /* Before Resetting PHY, put Core in Reset */ + setbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_CORESOFTRESET); + + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], + DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, + DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], + DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, + DWC3_GUSB2PHYCFG_PHYSOFTRST); + + /* After PHYs are stable we can take Core out of reset state */ + clrbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_CORESOFTRESET); +} + +static int dwc3_core_init(struct dwc3 *dwc3_reg) +{ + u32 reg; + u32 revision; + unsigned int dwc3_hwparams1; + + revision = readl(&dwc3_reg->g_snpsid); + /* This should read as U3 followed by revision number */ + if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { + puts("this is not a DesignWare USB3 DRD Core\n"); + return -EINVAL; + } + + dwc3_core_soft_reset(dwc3_reg); + + dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); + + reg = readl(&dwc3_reg->g_ctl); + reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + reg &= ~DWC3_GCTL_DISSCRAMBLE; + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + debug("No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if ((revision & DWC3_REVISION_MASK) < 0x190a) + reg |= DWC3_GCTL_U2RSTECN; + + writel(reg, &dwc3_reg->g_ctl); + + return 0; +} + +static int exynos_xhci_core_init(struct exynos_xhci *exynos) +{ + int ret; + + exynos5_usb3_phy_init(exynos->usb3_phy); + + ret = dwc3_core_init(exynos->dwc3_reg); + if (ret) { + debug("failed to initialize core\n"); + return -EINVAL; + } + + /* We are hard-coding DWC3 core to Host Mode */ + dwc3_set_mode(exynos->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); + + return 0; +} + +static void exynos_xhci_core_exit(struct exynos_xhci *exynos) +{ + exynos5_usb3_phy_exit(exynos->usb3_phy); +} + +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) +{ + struct exynos_xhci *ctx = &exynos; + int ret; + +#ifdef CONFIG_OF_CONTROL + exynos_usb3_parse_dt(gd->fdt_blob, ctx); +#else + ctx->usb3_phy = (struct exynos_usb3_phy *)samsung_get_base_usb3_phy(); + ctx->hcd = (struct xhci_hccr *)samsung_get_base_usb_xhci(); +#endif + + ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); + + ret = exynos_xhci_core_init(ctx); + if (ret) { + puts("XHCI: failed to initialize controller\n"); + return -EINVAL; + } + + *hccr = (ctx->hcd); + *hcor = (struct xhci_hcor *)((uint32_t) *hccr + + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + debug("Exynos5-xhci: init hccr %x and hcor %x hc_length %d\n", + (uint32_t)*hccr, (uint32_t)*hcor, + (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); + + return 0; +} + +void xhci_hcd_stop(int index) +{ + struct exynos_xhci *ctx = &exynos; + + exynos_xhci_core_exit(ctx); +} diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h new file mode 100644 index 0000000000..97d179a6e9 --- /dev/null +++ b/include/linux/usb/dwc3.h @@ -0,0 +1,188 @@ +/* include/linux/usb/dwc3.h + * + * Copyright (c) 2012 Samsung Electronics Co. Ltd + * + * Designware SuperSpeed USB 3.0 DRD Controller global and OTG registers + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DWC3_H_ +#define __DWC3_H_ + +/* Global constants */ +#define DWC3_ENDPOINTS_NUM 32 + +#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE +#define DWC3_EVENT_TYPE_MASK 0xfe + +#define DWC3_EVENT_TYPE_DEV 0 +#define DWC3_EVENT_TYPE_CARKIT 3 +#define DWC3_EVENT_TYPE_I2C 4 + +#define DWC3_DEVICE_EVENT_DISCONNECT 0 +#define DWC3_DEVICE_EVENT_RESET 1 +#define DWC3_DEVICE_EVENT_CONNECT_DONE 2 +#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3 +#define DWC3_DEVICE_EVENT_WAKEUP 4 +#define DWC3_DEVICE_EVENT_EOPF 6 +#define DWC3_DEVICE_EVENT_SOF 7 +#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9 +#define DWC3_DEVICE_EVENT_CMD_CMPL 10 +#define DWC3_DEVICE_EVENT_OVERFLOW 11 + +#define DWC3_GEVNTCOUNT_MASK 0xfffc +#define DWC3_GSNPSID_MASK 0xffff0000 +#define DWC3_GSNPSID_SHIFT 16 +#define DWC3_GSNPSREV_MASK 0xffff + +#define DWC3_REVISION_MASK 0xffff + +#define DWC3_REG_OFFSET 0xC100 + +struct g_event_buffer { + u64 g_evntadr; + u32 g_evntsiz; + u32 g_evntcount; +}; + +struct d_physical_endpoint { + u32 d_depcmdpar2; + u32 d_depcmdpar1; + u32 d_depcmdpar0; + u32 d_depcmd; +}; + +struct dwc3 { /* offset: 0xC100 */ + u32 g_sbuscfg0; + u32 g_sbuscfg1; + u32 g_txthrcfg; + u32 g_rxthrcfg; + u32 g_ctl; + + u32 reserved1; + + u32 g_sts; + + u32 reserved2; + + u32 g_snpsid; + u32 g_gpio; + u32 g_uid; + u32 g_uctl; + u64 g_buserraddr; + u64 g_prtbimap; + + u32 g_hwparams0; + u32 g_hwparams1; + u32 g_hwparams2; + u32 g_hwparams3; + u32 g_hwparams4; + u32 g_hwparams5; + u32 g_hwparams6; + u32 g_hwparams7; + + u32 g_dbgfifospace; + u32 g_dbgltssm; + u32 g_dbglnmcc; + u32 g_dbgbmu; + u32 g_dbglspmux; + u32 g_dbglsp; + u32 g_dbgepinfo0; + u32 g_dbgepinfo1; + + u64 g_prtbimap_hs; + u64 g_prtbimap_fs; + + u32 reserved3[28]; + + u32 g_usb2phycfg[16]; + u32 g_usb2i2cctl[16]; + u32 g_usb2phyacc[16]; + u32 g_usb3pipectl[16]; + + u32 g_txfifosiz[32]; + u32 g_rxfifosiz[32]; + + struct g_event_buffer g_evnt_buf[32]; + + u32 g_hwparams8; + + u32 reserved4[63]; + + u32 d_cfg; + u32 d_ctl; + u32 d_evten; + u32 d_sts; + u32 d_gcmdpar; + u32 d_gcmd; + + u32 reserved5[2]; + + u32 d_alepena; + + u32 reserved6[55]; + + struct d_physical_endpoint d_phy_ep_cmd[32]; + + u32 reserved7[128]; + + u32 o_cfg; + u32 o_ctl; + u32 o_evt; + u32 o_evten; + u32 o_sts; + + u32 reserved8[3]; + + u32 adp_cfg; + u32 adp_ctl; + u32 adp_evt; + u32 adp_evten; + + u32 bc_cfg; + + u32 reserved9; + + u32 bc_evt; + u32 bc_evten; +}; + +/* Global Configuration Register */ +#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19) +#define DWC3_GCTL_U2RSTECN (1 << 16) +#define DWC3_GCTL_RAMCLKSEL(x) \ + (((x) & DWC3_GCTL_CLK_MASK) << 6) +#define DWC3_GCTL_CLK_BUS (0) +#define DWC3_GCTL_CLK_PIPE (1) +#define DWC3_GCTL_CLK_PIPEHALF (2) +#define DWC3_GCTL_CLK_MASK (3) +#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12) +#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12) +#define DWC3_GCTL_PRTCAP_HOST 1 +#define DWC3_GCTL_PRTCAP_DEVICE 2 +#define DWC3_GCTL_PRTCAP_OTG 3 +#define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) +#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) + +/* Global HWPARAMS1 Register */ +#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24) +#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0 +#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 + +/* Global USB2 PHY Configuration Register */ +#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) + +/* Global USB3 PIPE Control Register */ +#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) +#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) + +/* Global TX Fifo Size Register */ +#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) +#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) + +#endif /* __DWC3_H_ */ -- 2.25.1