From 11c1af60b5c779be780d105fd33232282d30b5b6 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 24 Jan 2020 05:44:24 +0100 Subject: [PATCH] watchdog: omap_wdt: Fix WDT reloading The watchdog timer value was never updated in the hardware by this driver, so the watchdog triggered on some random stale value that was left in the hardware. The TI SPRUH37C says, quote: 20.4.3.9 Modifying Timer Count/Load Values and Prescaler Setting ... After a write access, the load register value and prescaler ratio registers are updated immediately, but new values are considered only after the next consecutive counter overflow or after a new trigger command (the WDT_WTGR register). This means at least one trigger must happen. The driver probably depended on someone calling it's .reset() callback, however that is not guaranteed e.g. if the WDT operates without servicing. Add this missing trigger. Signed-off-by: Marek Vasut Cc: Grygorii Strashko Cc: Sam Protsenko Cc: Suniel Mahesh Reviewed-by: Lokesh Vutla Signed-off-by: Lokesh Vutla --- drivers/watchdog/omap_wdt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index b9cdf70036..85425ca505 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -219,6 +219,16 @@ static int omap3_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WSPR) ; + /* Trigger the watchdog to actually reload the counter. */ + while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WTGR) + ; + + priv->wdt_trgr_pattern = ~(priv->wdt_trgr_pattern); + writel(priv->wdt_trgr_pattern, &priv->regs->wdtwtgr); + + while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WTGR) + ; + return 0; } -- 2.25.1