From 119e0d57aedb8fd586fee57d2c8be023a309c2cb Mon Sep 17 00:00:00 2001 From: Michal Cieslakiewicz Date: Wed, 13 Nov 2019 14:19:31 -0500 Subject: [PATCH] ath79: split dts file for Netgear WNDR4300 Move board configuration to dtsi file in preparation for WNDR3700v4 router support. Signed-off-by: Michal Cieslakiewicz --- .../linux/ath79/dts/ar9344_netgear_wndr.dtsi | 290 ++++++++++++++++++ .../ath79/dts/ar9344_netgear_wndr4300.dts | 286 +---------------- 2 files changed, 291 insertions(+), 285 deletions(-) create mode 100644 target/linux/ath79/dts/ar9344_netgear_wndr.dtsi diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi new file mode 100644 index 0000000000..16a4e3f6e8 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9344.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_power_amber; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_amber; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "rfkill"; + linux,code = ; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio_11>; + + led_power_green: power_green { + label = "netgear:green:power"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + + led_power_amber: power_amber { + label = "netgear:amber:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wan_green { + label = "netgear:green:wan"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "netgear:amber:wan"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + wlan2g_green { + label = "netgear:green:wlan2g"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g_blue { + label = "netgear:blue:wlan5g"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wps_green { + label = "netgear:green:wps"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wps_amber { + label = "netgear:amber:wps"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + usb_green { + label = "netgear:green:usb"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port>; + linux,default-trigger = "usbport"; + }; + }; +}; + +&pinmux { + enable_gpio_11: pinmux_enable_gpio_11 { + pinctrl-single,bits = <0x8 0x0 0xff000000>; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x40000>; + }; + + art: partition@80000 { + label = "caldata"; + reg = <0x80000 0x40000>; + read-only; + }; + + partition@c0000 { + label = "pot"; + reg = <0xc0000 0x80000>; + }; + + partition@140000 { + label = "language"; + reg = <0x140000 0x200000>; + }; + + partition@340000 { + label = "config"; + reg = <0x340000 0x80000>; + }; + + partition@3c0000 { + label = "traffic_meter"; + reg = <0x3c0000 0x300000>; + }; + + kernel@6c0000 { + label = "kernel"; + reg = <0x6c0000 0x200000>; + }; + + ubi@8c0000 { + label = "ubi"; + reg = <0x8c0000 0x1700000>; + }; + + partition@6c0000 { + label = "firmware"; + reg = <0x6c0000 0x1900000>; + compatible = "netgear,uimage"; + }; + + partition@1fc0000 { + label = "caldata_backup"; + reg = <0x1fc0000 0x40000>; + read-only; + }; + + partition@2000000 { + label = "reserved"; + reg = <0x2000000 0x6000000>; + read-only; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&builtin_switch { + resets = <&rst 8>, <&rst 12>; + reset-names = "switch", "switch-analog"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + qca,mib-poll-interval = <500>; + + qca,ar8327-initvals = < + 0x04 0x07600000 + 0x0c 0x01000000 + 0x10 0xc1000000 + 0x50 0xcc35cc35 + 0x54 0xcb37cb37 + 0x58 0x00000000 + 0x5c 0x00f3cf00 + 0x7c 0x0000007e + 0x94 0x0000007e + >; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M */ + pll-data = <0x06000000 0x00000101 0x00001616>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; +}; + +&gpio { + status = "okay"; + + lna0 { + gpio-hog; + line-name = "netgear:ext:lna0"; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-high; + }; + + lna1 { + gpio-hog; + line-name = "netgear:ext:lna1"; + gpios = <19 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&wmac { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + qca,no-eeprom; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0 { + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&art 0xc>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + + usb_power { + gpio-hog; + line-name = "netgear:power:usb"; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&uart { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts index 08cd84e51e..9b57bb88a6 100644 --- a/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts +++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts @@ -1,293 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include - -#include "ar9344.dtsi" +#include "ar9344_netgear_wndr.dtsi" / { compatible = "netgear,wndr4300", "qca,ar9344"; model = "Netgear WNDR4300"; - - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &led_power_amber; - led-failsafe = &led_power_amber; - led-running = &led_power_green; - led-upgrade = &led_power_amber; - label-mac-device = ð0; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - linux,code = ; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - }; - - rfkill { - label = "rfkill"; - linux,code = ; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&enable_gpio_11>; - - led_power_green: power_green { - label = "netgear:green:power"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - }; - - led_power_amber: power_amber { - label = "netgear:amber:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wan_green { - label = "netgear:green:wan"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - - wan_amber { - label = "netgear:amber:wan"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - wlan2g_green { - label = "netgear:green:wlan2g"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g_blue { - label = "netgear:blue:wlan5g"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wps_green { - label = "netgear:green:wps"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - wps_amber { - label = "netgear:amber:wps"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - - usb_green { - label = "netgear:green:usb"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - trigger-sources = <&hub_port>; - linux,default-trigger = "usbport"; - }; - }; -}; - -&pinmux { - enable_gpio_11: pinmux_enable_gpio_11 { - pinctrl-single,bits = <0x8 0x0 0xff000000>; - }; -}; - -&nand { - status = "okay"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x40000>; - }; - - art: partition@80000 { - label = "caldata"; - reg = <0x80000 0x40000>; - read-only; - }; - - partition@c0000 { - label = "pot"; - reg = <0xc0000 0x80000>; - }; - - partition@140000 { - label = "language"; - reg = <0x140000 0x200000>; - }; - - partition@340000 { - label = "config"; - reg = <0x340000 0x80000>; - }; - - partition@3c0000 { - label = "traffic_meter"; - reg = <0x3c0000 0x300000>; - }; - - kernel@6c0000 { - label = "kernel"; - reg = <0x6c0000 0x200000>; - }; - - ubi@8c0000 { - label = "ubi"; - reg = <0x8c0000 0x1700000>; - }; - - partition@6c0000 { - label = "firmware"; - reg = <0x6c0000 0x1900000>; - compatible = "netgear,uimage"; - }; - - partition@1fc0000 { - label = "caldata_backup"; - reg = <0x1fc0000 0x40000>; - read-only; - }; - - partition@2000000 { - label = "reserved"; - reg = <0x2000000 0x6000000>; - read-only; - }; - }; -}; - -&ref { - clock-frequency = <40000000>; -}; - -&builtin_switch { - resets = <&rst 8>, <&rst 12>; - reset-names = "switch", "switch-analog"; -}; - -&mdio0 { - status = "okay"; - - phy-mask = <0>; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - qca,mib-poll-interval = <500>; - - qca,ar8327-initvals = < - 0x04 0x07600000 - 0x0c 0x01000000 - 0x10 0xc1000000 - 0x50 0xcc35cc35 - 0x54 0xcb37cb37 - 0x58 0x00000000 - 0x5c 0x00f3cf00 - 0x7c 0x0000007e - 0x94 0x0000007e - >; - }; -}; - -ð0 { - status = "okay"; - - /* default for ar934x, except for 1000M */ - pll-data = <0x06000000 0x00000101 0x00001616>; - - mtd-mac-address = <&art 0x0>; - - phy-mode = "rgmii"; - phy-handle = <&phy0>; -}; - -&gpio { - status = "okay"; - - lna0 { - gpio-hog; - line-name = "netgear:ext:lna0"; - gpios = <18 GPIO_ACTIVE_HIGH>; - output-high; - }; - - lna1 { - gpio-hog; - line-name = "netgear:ext:lna1"; - gpios = <19 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&wmac { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - qca,no-eeprom; -}; - -&pcie { - status = "okay"; - - ath9k: wifi@0,0 { - compatible = "pci168c,0033"; - reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&art 0xc>; - qca,no-eeprom; - #gpio-cells = <2>; - gpio-controller; - - usb_power { - gpio-hog; - line-name = "netgear:power:usb"; - gpios = <0 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hub_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&uart { - status = "okay"; }; -- 2.25.1