From 0c4f658d58458e12a48663f1a910a0e909b7a5ee Mon Sep 17 00:00:00 2001 From: David Bauer Date: Tue, 29 May 2018 17:00:53 +0200 Subject: [PATCH] ar71xx: add support for OCEDO Koala This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer (cherry picked from commit e36f8b3f3980903d5cefc51fe274c19c7a0719f2) --- package/boot/uboot-envtools/files/ar71xx | 1 + .../ar71xx/base-files/etc/board.d/01_leds | 5 + .../ar71xx/base-files/etc/board.d/02_network | 1 + target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.9 | 1 + .../files/arch/mips/ath79/Kconfig.openwrt | 10 ++ .../ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-koala.c | 161 ++++++++++++++++++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/generic/config-default | 1 + target/linux/ar71xx/image/generic-senao.mk | 13 ++ 14 files changed, 206 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx index 516042e91c..2d9fcea1ac 100644 --- a/package/boot/uboot-envtools/files/ar71xx +++ b/package/boot/uboot-envtools/files/ar71xx @@ -38,6 +38,7 @@ gl-ar750|\ hornet-ub|\ hornet-ub-x2|\ jwap230|\ +koala|\ mr1750|\ mr1750v2|\ mr600|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index b3f5af1e4d..aec7741489 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -418,6 +418,11 @@ hornet-ub-x2) ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1" ;; +koala) + ucidef_set_led_default "power" "POWER" "$board:green:power" "1" + ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt" + ;; lan-turtle) ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1" ;; diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 547e2e04d2..0c6a055d93 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -82,6 +82,7 @@ ar71xx_setup_interfaces() fritz300e|\ gl-usb150|\ hiveap-121|\ + koala|\ lbe-m5|\ loco-m-xw|\ mr12|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 0c284a2087..f1f4980532 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -261,6 +261,9 @@ get_status_led() { jwap230) status_led="$board:green:led1" ;; + koala) + status_led="$board:blue:sys" + ;; lan-turtle) status_led="$board:orange:system" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5d01701aa8..30b755be22 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -104,6 +104,10 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; + koala) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 12) +0) + ;; mc-mac1200r) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 0fe778d9ff..de058c90be 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -765,6 +765,9 @@ ar71xx_board_detect() { *"JWAP230") name="jwap230" ;; + *"Koala") + name="koala" + ;; *"LAN Turtle") name="lan-turtle" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index eae7382af7..4b038b726c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -688,6 +688,7 @@ platform_check_image() { # these boards use metadata images fritz300e|\ fritz4020|\ + koala|\ rb-750-r2|\ rb-750p-pbr2|\ rb-750up-r2|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 94858ddbba..9f9d4dedc7 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -132,6 +132,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_JA76PF is not set # CONFIG_ATH79_MACH_JWAP003 is not set # CONFIG_ATH79_MACH_JWAP230 is not set +# CONFIG_ATH79_MACH_KOALA is not set # CONFIG_ATH79_MACH_LAN_TURTLE is not set # CONFIG_ATH79_MACH_LIMA is not set # CONFIG_ATH79_MACH_MC_MAC1200R is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 74da7418e2..5ea7a6f532 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -949,6 +949,16 @@ config ATH79_MACH_JWAP230 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_KOALA + bool "OCEDO Koala board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_ETH + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_WAM250 bool "Samsung WAM250 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 898853e5c0..17529499ac 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -142,6 +142,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o +obj-$(CONFIG_ATH79_MACH_KOALA) += mach-koala.o obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c new file mode 100644 index 0000000000..48354b4d2c --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c @@ -0,0 +1,161 @@ +/* + * OCEDO Koala board support + * Based on the MR1750 machine file + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Marek Lindner + * Copyright (c) 2018 David Bauer + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define KOALA_GPIO_LED_POWER 22 +#define KOALA_GPIO_LED_WLAN_5G 13 +#define KOALA_GPIO_LED_WLAN_2G 23 +#define KOALA_GPIO_LED_WLAN_SYS 19 + +#define KOALA_GPIO_BTN_RESET 17 + +#define KOALA_KEYS_POLL_INTERVAL 20 /* msecs */ +#define KOALA_KEYS_DEBOUNCE_INTERVAL (3 * KOALA_KEYS_POLL_INTERVAL) + +#define KOALA_LAN_MAC_OFFSET 0 +#define KOALA_WIFI2G_MAC_OFFSET 0x06 +#define KOALA_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led koala_leds_gpio[] __initdata = { + { + .name = "koala:green:power", + .gpio = KOALA_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "koala:red:wlan58", + .gpio = KOALA_GPIO_LED_WLAN_5G, + .active_low = 1, + }, + { + .name = "koala:yellow:wlan2", + .gpio = KOALA_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "koala:blue:sys", + .gpio = KOALA_GPIO_LED_WLAN_SYS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button koala_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = KOALA_KEYS_DEBOUNCE_INTERVAL, + .gpio = KOALA_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct at803x_platform_data koala_at803x_data = { + .disable_smarteee = 1, + .enable_rgmii_rx_delay = 1, + .enable_rgmii_tx_delay = 0, + .fixup_rgmii_tx_delay = 1, +}; + +static struct mdio_board_info koala_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 5, + .platform_data = &koala_at803x_data, + }, +}; + +static void __init koala_setup_qca955x_eth_cfg(u32 mask, + unsigned int rxd, + unsigned int rxdv, + unsigned int txd, + unsigned int txe) +{ + void __iomem *base; + u32 t; + + base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); + + t = mask; + t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; + t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; + t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; + t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; + + __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init koala_setup(void) +{ + u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); + u8 mac[6]; + + ath79_eth0_pll_data.pll_1000 = 0xae000000; + ath79_eth0_pll_data.pll_100 = 0xa0000101; + ath79_eth0_pll_data.pll_10 = 0xa0001313; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(koala_leds_gpio), + koala_leds_gpio); + ath79_register_gpio_keys_polled(-1, KOALA_KEYS_POLL_INTERVAL, + ARRAY_SIZE(koala_gpio_keys), + koala_gpio_keys); + + ath79_init_mac(mac, art + KOALA_WIFI2G_MAC_OFFSET, 0); + ath79_register_wmac(art + KOALA_WMAC_CALDATA_OFFSET, mac); + ath79_register_pci(); + + koala_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); + ath79_register_mdio(0, 0x0); + + mdiobus_register_board_info(koala_mdio0_info, + ARRAY_SIZE(koala_mdio0_info)); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + KOALA_LAN_MAC_OFFSET, 0); + + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(5); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_KOALA, "KOALA", "OCEDO Koala", koala_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 0d0d309ce8..5f2244d209 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -140,6 +140,7 @@ enum ath79_mach_type { ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ ATH79_MACH_JWAP230, /* jjPlus JWAP230 */ + ATH79_MACH_KOALA, /* OCEDO Koala */ ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */ ATH79_MACH_LIMA, /* 8devices Lima */ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index c85453af93..0051048e30 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -104,6 +104,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y CONFIG_ATH79_MACH_JA76PF=y CONFIG_ATH79_MACH_JWAP003=y CONFIG_ATH79_MACH_JWAP230=y +CONFIG_ATH79_MACH_KOALA=y CONFIG_ATH79_MACH_LAN_TURTLE=y CONFIG_ATH79_MACH_LIMA=y CONFIG_ATH79_MACH_MC_MAC1200R=y diff --git a/target/linux/ar71xx/image/generic-senao.mk b/target/linux/ar71xx/image/generic-senao.mk index 3a7f6776b3..f5473126dd 100644 --- a/target/linux/ar71xx/image/generic-senao.mk +++ b/target/linux/ar71xx/image/generic-senao.mk @@ -26,3 +26,16 @@ define Device/ens202ext IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += ens202ext + +define Device/koala + DEVICE_TITLE := OCEDO Koala + BOARDNAME := KOALA + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x + KERNEL_SIZE := 1536k + IMAGE_SIZE := 7424k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),1536k(kernel),5888k(rootfs),1536k(kernel2),5888k(rootfs2),1088k(data)ro,64k(id)ro,64k(art)ro,7424k@0x50000(firmware) + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma + KERNEL_INITRAMFS := $$(KERNEL) + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += koala -- 2.25.1