From 0c18846aac71da4b02262d7f799e3fc34b0b53f8 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Sun, 6 Aug 2017 19:59:46 +0200 Subject: [PATCH] Keep TP-Link TL-WR902AC v1 power LED always on All LEDs in TL-WR902AC v1 are controlled by GPIOs and there is no usual "power" LED, connected to the VCC. This makes one of the LEDs (marked as "power" on the enclosure) always turned on. --- u-boot/include/configs/ap143.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/u-boot/include/configs/ap143.h b/u-boot/include/configs/ap143.h index cb451aa..eb662ff 100644 --- a/u-boot/include/configs/ap143.h +++ b/u-boot/include/configs/ap143.h @@ -132,13 +132,13 @@ #elif defined(CONFIG_FOR_TPLINK_WR902AC_V1) - #define CONFIG_QCA_GPIO_MASK_LED_ACT_H GPIO4 | GPIO13 | GPIO15 + #define CONFIG_QCA_GPIO_MASK_LED_ACT_H GPIO4 | GPIO15 #define CONFIG_QCA_GPIO_MASK_LED_ACT_L GPIO0 | GPIO11 | GPIO12 - #define CONFIG_QCA_GPIO_MASK_OUT GPIO1 |\ + #define CONFIG_QCA_GPIO_MASK_OUT GPIO1 | GPIO13 |\ CONFIG_QCA_GPIO_MASK_LED_ACT_H |\ CONFIG_QCA_GPIO_MASK_LED_ACT_L #define CONFIG_QCA_GPIO_MASK_IN GPIO2 | GPIO3 | GPIO14 | GPIO17 - #define CONFIG_QCA_GPIO_MASK_OUT_INIT_H GPIO1 |\ + #define CONFIG_QCA_GPIO_MASK_OUT_INIT_H GPIO1 | GPIO13 |\ CONFIG_QCA_GPIO_MASK_LED_ACT_L #define CONFIG_QCA_GPIO_MASK_OUT_INIT_L CONFIG_QCA_GPIO_MASK_LED_ACT_H -- 2.25.1