From 0b23fb368d08c9669fac647971ff249c3f9fee8f Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Tue, 21 Jul 2009 19:32:21 +0400 Subject: [PATCH] fec_mxc: driver for FEC ethernet controller on i.MX27 Signed-off-by: Ilya Yanok Signed-off-by: Ben Warren --- cpu/arm926ejs/mx27/generic.c | 10 + drivers/net/Makefile | 1 + drivers/net/fec_mxc.c | 742 +++++++++++++++++++++++++++++++++++ drivers/net/fec_mxc.h | 304 ++++++++++++++ include/netdev.h | 1 + 5 files changed, 1058 insertions(+) create mode 100644 drivers/net/fec_mxc.c create mode 100644 drivers/net/fec_mxc.h diff --git a/cpu/arm926ejs/mx27/generic.c b/cpu/arm926ejs/mx27/generic.c index bcf7899baa..47fa4b48ed 100644 --- a/cpu/arm926ejs/mx27/generic.c +++ b/cpu/arm926ejs/mx27/generic.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -159,6 +160,15 @@ int print_cpuinfo (void) } #endif +int cpu_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FEC_MXC) + return fecmxc_initialize(bis); +#else + return 0; +#endif +} + void imx_gpio_mode(int gpio_mode) { struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1ce2936cbc..34b56d8253 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_DNET) += dnet.o COBJS-$(CONFIG_E1000) += e1000.o COBJS-$(CONFIG_EEPRO100) += eepro100.o COBJS-$(CONFIG_ENC28J60) += enc28j60.o +COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o COBJS-$(CONFIG_GRETH) += greth.o COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c new file mode 100644 index 0000000000..faf008cea1 --- /dev/null +++ b/drivers/net/fec_mxc.c @@ -0,0 +1,742 @@ +/* + * (C) Copyright 2009 Ilya Yanok, Emcraft Systems Ltd + * (C) Copyright 2008,2009 Eric Jarrige + * (C) Copyright 2008 Armadeus Systems nc + * (C) Copyright 2007 Pengutronix, Sascha Hauer + * (C) Copyright 2007 Pengutronix, Juergen Beisert + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "fec_mxc.h" + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_MII +#error "CONFIG_MII has to be defined!" +#endif + +#undef DEBUG + +struct nbuf { + uint8_t data[1500]; /**< actual data */ + int length; /**< actual length */ + int used; /**< buffer in use or not */ + uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */ +}; + +struct fec_priv gfec = { + .eth = (struct ethernet_regs *)IMX_FEC_BASE, + .xcv_type = MII100, + .rbd_base = NULL, + .rbd_index = 0, + .tbd_base = NULL, + .tbd_index = 0, + .bd = NULL, +}; + +/* + * MII-interface related functions + */ +static int fec_miiphy_read(char *dev, uint8_t phyAddr, uint8_t regAddr, + uint16_t *retVal) +{ + struct eth_device *edev = eth_get_dev_by_name(dev); + struct fec_priv *fec = (struct fec_priv *)edev->priv; + + uint32_t reg; /* convenient holder for the PHY register */ + uint32_t phy; /* convenient holder for the PHY */ + uint32_t start; + + /* + * reading from any PHY's register is done by properly + * programming the FEC's MII data register. + */ + writel(FEC_IEVENT_MII, &fec->eth->ievent); + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | + phy | reg, &fec->eth->mii_data); + + /* + * wait for the related interrupt + */ + start = get_timer_masked(); + while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) { + if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { + printf("Read MDIO failed...\n"); + return -1; + } + } + + /* + * clear mii interrupt bit + */ + writel(FEC_IEVENT_MII, &fec->eth->ievent); + + /* + * it's now safe to read the PHY's register + */ + *retVal = readl(&fec->eth->mii_data); + debug("fec_miiphy_read: phy: %02x reg:%02x val:%#x\n", phyAddr, + regAddr, *retVal); + return 0; +} + +static int fec_miiphy_write(char *dev, uint8_t phyAddr, uint8_t regAddr, + uint16_t data) +{ + struct eth_device *edev = eth_get_dev_by_name(dev); + struct fec_priv *fec = (struct fec_priv *)edev->priv; + + uint32_t reg; /* convenient holder for the PHY register */ + uint32_t phy; /* convenient holder for the PHY */ + uint32_t start; + + reg = regAddr << FEC_MII_DATA_RA_SHIFT; + phy = phyAddr << FEC_MII_DATA_PA_SHIFT; + + writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | + FEC_MII_DATA_TA | phy | reg | data, &fec->eth->mii_data); + + /* + * wait for the MII interrupt + */ + start = get_timer_masked(); + while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) { + if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { + printf("Write MDIO failed...\n"); + return -1; + } + } + + /* + * clear MII interrupt bit + */ + writel(FEC_IEVENT_MII, &fec->eth->ievent); + debug("fec_miiphy_write: phy: %02x reg:%02x val:%#x\n", phyAddr, + regAddr, data); + + return 0; +} + +static int miiphy_restart_aneg(struct eth_device *dev) +{ + /* + * Wake up from sleep if necessary + * Reset PHY, then delay 300ns + */ + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF); + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR, + PHY_BMCR_RESET); + udelay(1000); + + /* + * Set the auto-negotiation advertisement register bits + */ + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, 0x1e0); + miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR, + PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + + return 0; +} + +static int miiphy_wait_aneg(struct eth_device *dev) +{ + uint32_t start; + uint16_t status; + + /* + * Wait for AN completion + */ + start = get_timer_masked(); + do { + if (get_timer(start) > (CONFIG_SYS_HZ * 5)) { + printf("%s: Autonegotiation timeout\n", dev->name); + return -1; + } + + if (miiphy_read(dev->name, CONFIG_FEC_MXC_PHYADDR, + PHY_BMSR, &status)) { + printf("%s: Autonegotiation failed. status: 0x%04x\n", + dev->name, status); + return -1; + } + } while (!(status & PHY_BMSR_LS)); + + return 0; +} +static int fec_rx_task_enable(struct fec_priv *fec) +{ + writel(1 << 24, &fec->eth->r_des_active); + return 0; +} + +static int fec_rx_task_disable(struct fec_priv *fec) +{ + return 0; +} + +static int fec_tx_task_enable(struct fec_priv *fec) +{ + writel(1 << 24, &fec->eth->x_des_active); + return 0; +} + +static int fec_tx_task_disable(struct fec_priv *fec) +{ + return 0; +} + +/** + * Initialize receive task's buffer descriptors + * @param[in] fec all we know about the device yet + * @param[in] count receive buffer count to be allocated + * @param[in] size size of each receive buffer + * @return 0 on success + * + * For this task we need additional memory for the data buffers. And each + * data buffer requires some alignment. Thy must be aligned to a specific + * boundary each (DB_DATA_ALIGNMENT). + */ +static int fec_rbd_init(struct fec_priv *fec, int count, int size) +{ + int ix; + uint32_t p = 0; + + /* reserve data memory and consider alignment */ + fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT); + p = (uint32_t)fec->rdb_ptr; + if (!p) { + puts("fec_imx27: not enough malloc memory!\n"); + return -ENOMEM; + } + memset((void *)p, 0, size * count + DB_DATA_ALIGNMENT); + p += DB_DATA_ALIGNMENT-1; + p &= ~(DB_DATA_ALIGNMENT-1); + + for (ix = 0; ix < count; ix++) { + writel(p, &fec->rbd_base[ix].data_pointer); + p += size; + writew(FEC_RBD_EMPTY, &fec->rbd_base[ix].status); + writew(0, &fec->rbd_base[ix].data_length); + } + /* + * mark the last RBD to close the ring + */ + writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &fec->rbd_base[ix - 1].status); + fec->rbd_index = 0; + + return 0; +} + +/** + * Initialize transmit task's buffer descriptors + * @param[in] fec all we know about the device yet + * + * Transmit buffers are created externally. We only have to init the BDs here.\n + * Note: There is a race condition in the hardware. When only one BD is in + * use it must be marked with the WRAP bit to use it for every transmitt. + * This bit in combination with the READY bit results into double transmit + * of each data buffer. It seems the state machine checks READY earlier then + * resetting it after the first transfer. + * Using two BDs solves this issue. + */ +static void fec_tbd_init(struct fec_priv *fec) +{ + writew(0x0000, &fec->tbd_base[0].status); + writew(FEC_TBD_WRAP, &fec->tbd_base[1].status); + fec->tbd_index = 0; +} + +/** + * Mark the given read buffer descriptor as free + * @param[in] last 1 if this is the last buffer descriptor in the chain, else 0 + * @param[in] pRbd buffer descriptor to mark free again + */ +static void fec_rbd_clean(int last, struct fec_bd *pRbd) +{ + /* + * Reset buffer descriptor as empty + */ + if (last) + writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &pRbd->status); + else + writew(FEC_RBD_EMPTY, &pRbd->status); + /* + * no data in it + */ + writew(0, &pRbd->data_length); +} + +static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac) +{ + struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; + int i; + + for (i = 0; i < 6; i++) + mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]); + + return is_valid_ether_addr(mac); +} + +static int fec_set_hwaddr(struct eth_device *dev, unsigned char *mac) +{ + struct fec_priv *fec = (struct fec_priv *)dev->priv; + + writel(0, &fec->eth->iaddr1); + writel(0, &fec->eth->iaddr2); + writel(0, &fec->eth->gaddr1); + writel(0, &fec->eth->gaddr2); + + /* + * Set physical address + */ + writel((mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3], + &fec->eth->paddr1); + writel((mac[4] << 24) + (mac[5] << 16) + 0x8808, &fec->eth->paddr2); + + return 0; +} + +/** + * Start the FEC engine + * @param[in] dev Our device to handle + */ +static int fec_open(struct eth_device *edev) +{ + struct fec_priv *fec = (struct fec_priv *)edev->priv; + + debug("fec_open: fec_open(dev)\n"); + /* full-duplex, heartbeat disabled */ + writel(1 << 2, &fec->eth->x_cntrl); + fec->rbd_index = 0; + + /* + * Enable FEC-Lite controller + */ + writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); + + miiphy_wait_aneg(edev); + miiphy_speed(edev->name, 0); + miiphy_duplex(edev->name, 0); + + /* + * Enable SmartDMA receive task + */ + fec_rx_task_enable(fec); + + udelay(100000); + return 0; +} + +static int fec_init(struct eth_device *dev, bd_t* bd) +{ + uint32_t base; + struct fec_priv *fec = (struct fec_priv *)dev->priv; + + /* + * reserve memory for both buffer descriptor chains at once + * Datasheet forces the startaddress of each chain is 16 byte + * aligned + */ + fec->base_ptr = malloc((2 + FEC_RBD_NUM) * + sizeof(struct fec_bd) + DB_ALIGNMENT); + base = (uint32_t)fec->base_ptr; + if (!base) { + puts("fec_imx27: not enough malloc memory!\n"); + return -ENOMEM; + } + memset((void *)base, 0, (2 + FEC_RBD_NUM) * + sizeof(struct fec_bd) + DB_ALIGNMENT); + base += (DB_ALIGNMENT-1); + base &= ~(DB_ALIGNMENT-1); + + fec->rbd_base = (struct fec_bd *)base; + + base += FEC_RBD_NUM * sizeof(struct fec_bd); + + fec->tbd_base = (struct fec_bd *)base; + + /* + * Set interrupt mask register + */ + writel(0x00000000, &fec->eth->imask); + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + writel(0xffffffff, &fec->eth->ievent); + + + /* + * Set FEC-Lite receive control register(R_CNTRL): + */ + if (fec->xcv_type == SEVENWIRE) { + /* + * Frame length=1518; 7-wire mode + */ + writel(0x05ee0020, &fec->eth->r_cntrl); /* FIXME 0x05ee0000 */ + } else { + /* + * Frame length=1518; MII mode; + */ + writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */ + /* + * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock + * and do not drop the Preamble. + */ + writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1, + &fec->eth->mii_speed); + debug("fec_init: mii_speed %#lx\n", + (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1); + } + /* + * Set Opcode/Pause Duration Register + */ + writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */ + writel(0x2, &fec->eth->x_wmrk); + /* + * Set multicast address filter + */ + writel(0x00000000, &fec->eth->gaddr1); + writel(0x00000000, &fec->eth->gaddr2); + + + /* clear MIB RAM */ + long *mib_ptr = (long *)(IMX_FEC_BASE + 0x200); + while (mib_ptr <= (long *)(IMX_FEC_BASE + 0x2FC)) + *mib_ptr++ = 0; + + /* FIFO receive start register */ + writel(0x520, &fec->eth->r_fstart); + + /* size and address of each buffer */ + writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr); + writel((uint32_t)fec->tbd_base, &fec->eth->etdsr); + writel((uint32_t)fec->rbd_base, &fec->eth->erdsr); + + /* + * Initialize RxBD/TxBD rings + */ + if (fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE) < 0) { + free(fec->base_ptr); + return -ENOMEM; + } + fec_tbd_init(fec); + + + if (fec->xcv_type != SEVENWIRE) + miiphy_restart_aneg(dev); + + fec_open(dev); + return 0; +} + +/** + * Halt the FEC engine + * @param[in] dev Our device to handle + */ +static void fec_halt(struct eth_device *dev) +{ + struct fec_priv *fec = &gfec; + int counter = 0xffff; + + /* + * issue graceful stop command to the FEC transmitter if necessary + */ + writel(FEC_ECNTRL_RESET | readl(&fec->eth->x_cntrl), + &fec->eth->x_cntrl); + + debug("eth_halt: wait for stop regs\n"); + /* + * wait for graceful stop to register + */ + while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA))) + ; /* FIXME ensure time */ + + /* + * Disable SmartDMA tasks + */ + fec_tx_task_disable(fec); + fec_rx_task_disable(fec); + + /* + * Disable the Ethernet Controller + * Note: this will also reset the BD index counter! + */ + writel(0, &fec->eth->ecntrl); + fec->rbd_index = 0; + fec->tbd_index = 0; + free(fec->rdb_ptr); + free(fec->base_ptr); + debug("eth_halt: done\n"); +} + +/** + * Transmit one frame + * @param[in] dev Our ethernet device to handle + * @param[in] packet Pointer to the data to be transmitted + * @param[in] length Data count in bytes + * @return 0 on success + */ +static int fec_send(struct eth_device *dev, volatile void* packet, int length) +{ + unsigned int status; + + /* + * This routine transmits one frame. This routine only accepts + * 6-byte Ethernet addresses. + */ + struct fec_priv *fec = (struct fec_priv *)dev->priv; + + /* + * Check for valid length of data. + */ + if ((length > 1500) || (length <= 0)) { + printf("Payload (%d) to large!\n", length); + return -1; + } + + /* + * Setup the transmit buffer + * Note: We are always using the first buffer for transmission, + * the second will be empty and only used to stop the DMA engine + */ + writew(length, &fec->tbd_base[fec->tbd_index].data_length); + writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer); + /* + * update BD's status now + * This block: + * - is always the last in a chain (means no chain) + * - should transmitt the CRC + * - might be the last BD in the list, so the address counter should + * wrap (-> keep the WRAP flag) + */ + status = readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_WRAP; + status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; + writew(status, &fec->tbd_base[fec->tbd_index].status); + + /* + * Enable SmartDMA transmit task + */ + fec_tx_task_enable(fec); + + /* + * wait until frame is sent . + */ + while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) { + /* FIXME: Timeout */ + } + debug("fec_send: status 0x%x index %d\n", + readw(&fec->tbd_base[fec->tbd_index].status), + fec->tbd_index); + /* for next transmission use the other buffer */ + if (fec->tbd_index) + fec->tbd_index = 0; + else + fec->tbd_index = 1; + + return 0; +} + +/** + * Pull one frame from the card + * @param[in] dev Our ethernet device to handle + * @return Length of packet read + */ +static int fec_recv(struct eth_device *dev) +{ + struct fec_priv *fec = (struct fec_priv *)dev->priv; + struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index]; + unsigned long ievent; + int frame_length, len = 0; + struct nbuf *frame; + uint16_t bd_status; + uchar buff[FEC_MAX_PKT_SIZE]; + + /* + * Check if any critical events have happened + */ + ievent = readl(&fec->eth->ievent); + writel(ievent, &fec->eth->ievent); + debug("fec_recv: ievent 0x%x\n", ievent); + if (ievent & FEC_IEVENT_BABR) { + fec_halt(dev); + fec_init(dev, fec->bd); + printf("some error: 0x%08lx\n", ievent); + return 0; + } + if (ievent & FEC_IEVENT_HBERR) { + /* Heartbeat error */ + writel(0x00000001 | readl(&fec->eth->x_cntrl), + &fec->eth->x_cntrl); + } + if (ievent & FEC_IEVENT_GRA) { + /* Graceful stop complete */ + if (readl(&fec->eth->x_cntrl) & 0x00000001) { + fec_halt(dev); + writel(~0x00000001 & readl(&fec->eth->x_cntrl), + &fec->eth->x_cntrl); + fec_init(dev, fec->bd); + } + } + + /* + * ensure reading the right buffer status + */ + bd_status = readw(&rbd->status); + debug("fec_recv: status 0x%x\n", bd_status); + + if (!(bd_status & FEC_RBD_EMPTY)) { + if ((bd_status & FEC_RBD_LAST) && !(bd_status & FEC_RBD_ERR) && + ((readw(&rbd->data_length) - 4) > 14)) { + /* + * Get buffer address and size + */ + frame = (struct nbuf *)readl(&rbd->data_pointer); + frame_length = readw(&rbd->data_length) - 4; + /* + * Fill the buffer and pass it to upper layers + */ + memcpy(buff, frame->data, frame_length); + NetReceive(buff, frame_length); + len = frame_length; + } else { + if (bd_status & FEC_RBD_ERR) + printf("error frame: 0x%08lx 0x%08x\n", + (ulong)rbd->data_pointer, + bd_status); + } + /* + * free the current buffer, restart the engine + * and move forward to the next buffer + */ + fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd); + fec_rx_task_enable(fec); + fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM; + } + debug("fec_recv: stop\n"); + + return len; +} + +static int fec_probe(bd_t *bd) +{ + struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; + struct eth_device *edev; + struct fec_priv *fec = &gfec; + unsigned char ethaddr_str[20]; + unsigned char ethaddr[6]; + char *tmp = getenv("ethaddr"); + char *end; + + /* enable FEC clock */ + writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1); + writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0); + + /* create and fill edev struct */ + edev = (struct eth_device *)malloc(sizeof(struct eth_device)); + if (!edev) { + puts("fec_imx27: not enough malloc memory!\n"); + return -ENOMEM; + } + edev->priv = fec; + edev->init = fec_init; + edev->send = fec_send; + edev->recv = fec_recv; + edev->halt = fec_halt; + + fec->eth = (struct ethernet_regs *)IMX_FEC_BASE; + fec->bd = bd; + + fec->xcv_type = MII100; + + /* Reset chip. */ + writel(FEC_ECNTRL_RESET, &fec->eth->ecntrl); + while (readl(&fec->eth->ecntrl) & 1) + udelay(10); + + /* + * Set interrupt mask register + */ + writel(0x00000000, &fec->eth->imask); + + /* + * Clear FEC-Lite interrupt event register(IEVENT) + */ + writel(0xffffffff, &fec->eth->ievent); + + /* + * Set FEC-Lite receive control register(R_CNTRL): + */ + /* + * Frame length=1518; MII mode; + */ + writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */ + /* + * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock + * and do not drop the Preamble. + */ + writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1, + &fec->eth->mii_speed); + debug("fec_init: mii_speed %#lx\n", + (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1); + + sprintf(edev->name, "FEC_MXC"); + + miiphy_register(edev->name, fec_miiphy_read, fec_miiphy_write); + + eth_register(edev); + + if ((NULL != tmp) && (12 <= strlen(tmp))) { + int i; + /* convert MAC from string to int */ + for (i = 0; i < 6; i++) { + ethaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end + 1 : end; + } + } else if (fec_get_hwaddr(edev, ethaddr) == 0) { + printf("got MAC address from EEPROM: %pM\n", ethaddr); + setenv("ethaddr", (char *)ethaddr_str); + } + memcpy(edev->enetaddr, ethaddr, 6); + fec_set_hwaddr(edev, ethaddr); + + return 0; +} + +int fecmxc_initialize(bd_t *bd) +{ + int lout = 1; + + debug("eth_init: fec_probe(bd)\n"); + lout = fec_probe(bd); + + return lout; +} + diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h new file mode 100644 index 0000000000..6cb1bfc055 --- /dev/null +++ b/drivers/net/fec_mxc.h @@ -0,0 +1,304 @@ +/* + * (C) Copyright 2009 Ilya Yanok, Emcraft Systems Ltd + * (C) Copyright 2008 Armadeus Systems, nc + * (C) Copyright 2008 Eric Jarrige + * (C) Copyright 2007 Pengutronix, Sascha Hauer + * (C) Copyright 2007 Pengutronix, Juergen Beisert + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This file is based on mpc4200fec.h + * (C) Copyright Motorola, Inc., 2000 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + + +#ifndef __FEC_MXC_H +#define __FEC_MXC_H + +/** + * Layout description of the FEC + */ +struct ethernet_regs { + +/* [10:2]addr = 00 */ + +/* Control and status Registers (offset 000-1FF) */ + + uint32_t res0[1]; /* MBAR_ETH + 0x000 */ + uint32_t ievent; /* MBAR_ETH + 0x004 */ + uint32_t imask; /* MBAR_ETH + 0x008 */ + + uint32_t res1[1]; /* MBAR_ETH + 0x00C */ + uint32_t r_des_active; /* MBAR_ETH + 0x010 */ + uint32_t x_des_active; /* MBAR_ETH + 0x014 */ + uint32_t res2[3]; /* MBAR_ETH + 0x018-20 */ + uint32_t ecntrl; /* MBAR_ETH + 0x024 */ + + uint32_t res3[6]; /* MBAR_ETH + 0x028-03C */ + uint32_t mii_data; /* MBAR_ETH + 0x040 */ + uint32_t mii_speed; /* MBAR_ETH + 0x044 */ + uint32_t res4[7]; /* MBAR_ETH + 0x048-60 */ + uint32_t mib_control; /* MBAR_ETH + 0x064 */ + + uint32_t res5[7]; /* MBAR_ETH + 0x068-80 */ + uint32_t r_cntrl; /* MBAR_ETH + 0x084 */ + uint32_t res6[15]; /* MBAR_ETH + 0x088-C0 */ + uint32_t x_cntrl; /* MBAR_ETH + 0x0C4 */ + uint32_t res7[7]; /* MBAR_ETH + 0x0C8-E0 */ + uint32_t paddr1; /* MBAR_ETH + 0x0E4 */ + uint32_t paddr2; /* MBAR_ETH + 0x0E8 */ + uint32_t op_pause; /* MBAR_ETH + 0x0EC */ + + uint32_t res8[10]; /* MBAR_ETH + 0x0F0-114 */ + uint32_t iaddr1; /* MBAR_ETH + 0x118 */ + uint32_t iaddr2; /* MBAR_ETH + 0x11C */ + uint32_t gaddr1; /* MBAR_ETH + 0x120 */ + uint32_t gaddr2; /* MBAR_ETH + 0x124 */ + uint32_t res9[7]; /* MBAR_ETH + 0x128-140 */ + + uint32_t x_wmrk; /* MBAR_ETH + 0x144 */ + uint32_t res10[1]; /* MBAR_ETH + 0x148 */ + uint32_t r_bound; /* MBAR_ETH + 0x14C */ + uint32_t r_fstart; /* MBAR_ETH + 0x150 */ + uint32_t res11[11]; /* MBAR_ETH + 0x154-17C */ + uint32_t erdsr; /* MBAR_ETH + 0x180 */ + uint32_t etdsr; /* MBAR_ETH + 0x184 */ + uint32_t emrbr; /* MBAR_ETH + 0x188 */ + uint32_t res12[29]; /* MBAR_ETH + 0x18C-1FC */ + +/* MIB COUNTERS (Offset 200-2FF) */ + + uint32_t rmon_t_drop; /* MBAR_ETH + 0x200 */ + uint32_t rmon_t_packets; /* MBAR_ETH + 0x204 */ + uint32_t rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ + uint32_t rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ + uint32_t rmon_t_crc_align; /* MBAR_ETH + 0x210 */ + uint32_t rmon_t_undersize; /* MBAR_ETH + 0x214 */ + uint32_t rmon_t_oversize; /* MBAR_ETH + 0x218 */ + uint32_t rmon_t_frag; /* MBAR_ETH + 0x21C */ + uint32_t rmon_t_jab; /* MBAR_ETH + 0x220 */ + uint32_t rmon_t_col; /* MBAR_ETH + 0x224 */ + uint32_t rmon_t_p64; /* MBAR_ETH + 0x228 */ + uint32_t rmon_t_p65to127; /* MBAR_ETH + 0x22C */ + uint32_t rmon_t_p128to255; /* MBAR_ETH + 0x230 */ + uint32_t rmon_t_p256to511; /* MBAR_ETH + 0x234 */ + uint32_t rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ + uint32_t rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ + uint32_t rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ + uint32_t rmon_t_octets; /* MBAR_ETH + 0x244 */ + uint32_t ieee_t_drop; /* MBAR_ETH + 0x248 */ + uint32_t ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ + uint32_t ieee_t_1col; /* MBAR_ETH + 0x250 */ + uint32_t ieee_t_mcol; /* MBAR_ETH + 0x254 */ + uint32_t ieee_t_def; /* MBAR_ETH + 0x258 */ + uint32_t ieee_t_lcol; /* MBAR_ETH + 0x25C */ + uint32_t ieee_t_excol; /* MBAR_ETH + 0x260 */ + uint32_t ieee_t_macerr; /* MBAR_ETH + 0x264 */ + uint32_t ieee_t_cserr; /* MBAR_ETH + 0x268 */ + uint32_t ieee_t_sqe; /* MBAR_ETH + 0x26C */ + uint32_t t_fdxfc; /* MBAR_ETH + 0x270 */ + uint32_t ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ + + uint32_t res13[2]; /* MBAR_ETH + 0x278-27C */ + uint32_t rmon_r_drop; /* MBAR_ETH + 0x280 */ + uint32_t rmon_r_packets; /* MBAR_ETH + 0x284 */ + uint32_t rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ + uint32_t rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ + uint32_t rmon_r_crc_align; /* MBAR_ETH + 0x290 */ + uint32_t rmon_r_undersize; /* MBAR_ETH + 0x294 */ + uint32_t rmon_r_oversize; /* MBAR_ETH + 0x298 */ + uint32_t rmon_r_frag; /* MBAR_ETH + 0x29C */ + uint32_t rmon_r_jab; /* MBAR_ETH + 0x2A0 */ + + uint32_t rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ + + uint32_t rmon_r_p64; /* MBAR_ETH + 0x2A8 */ + uint32_t rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ + uint32_t rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ + uint32_t rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ + uint32_t rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ + uint32_t rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ + uint32_t rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ + uint32_t rmon_r_octets; /* MBAR_ETH + 0x2C4 */ + uint32_t ieee_r_drop; /* MBAR_ETH + 0x2C8 */ + uint32_t ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ + uint32_t ieee_r_crc; /* MBAR_ETH + 0x2D0 */ + uint32_t ieee_r_align; /* MBAR_ETH + 0x2D4 */ + uint32_t r_macerr; /* MBAR_ETH + 0x2D8 */ + uint32_t r_fdxfc; /* MBAR_ETH + 0x2DC */ + uint32_t ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ + + uint32_t res14[6]; /* MBAR_ETH + 0x2E4-2FC */ + + uint32_t res15[64]; /* MBAR_ETH + 0x300-3FF */ +}; + +#define FEC_IEVENT_HBERR 0x80000000 +#define FEC_IEVENT_BABR 0x40000000 +#define FEC_IEVENT_BABT 0x20000000 +#define FEC_IEVENT_GRA 0x10000000 +#define FEC_IEVENT_TXF 0x08000000 +#define FEC_IEVENT_TXB 0x04000000 +#define FEC_IEVENT_RXF 0x02000000 +#define FEC_IEVENT_RXB 0x01000000 +#define FEC_IEVENT_MII 0x00800000 +#define FEC_IEVENT_EBERR 0x00400000 +#define FEC_IEVENT_LC 0x00200000 +#define FEC_IEVENT_RL 0x00100000 +#define FEC_IEVENT_UN 0x00080000 + +#define FEC_IMASK_HBERR 0x80000000 +#define FEC_IMASK_BABR 0x40000000 +#define FEC_IMASKT_BABT 0x20000000 +#define FEC_IMASK_GRA 0x10000000 +#define FEC_IMASKT_TXF 0x08000000 +#define FEC_IMASK_TXB 0x04000000 +#define FEC_IMASKT_RXF 0x02000000 +#define FEC_IMASK_RXB 0x01000000 +#define FEC_IMASK_MII 0x00800000 +#define FEC_IMASK_EBERR 0x00400000 +#define FEC_IMASK_LC 0x00200000 +#define FEC_IMASKT_RL 0x00100000 +#define FEC_IMASK_UN 0x00080000 + + +#define FEC_RCNTRL_MAX_FL_SHIFT 16 +#define FEC_RCNTRL_LOOP 0x00000001 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_FCE 0x00000020 + +#define FEC_TCNTRL_GTS 0x00000001 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_TFC_PAUSE 0x00000008 +#define FEC_TCNTRL_RFC_PAUSE 0x00000010 + +#define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */ +#define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */ + +/** + * @brief Descriptor buffer alignment + * + * i.MX27 requires a 16 byte alignment (but for the first element only) + */ +#define DB_ALIGNMENT 16 + +/** + * @brief Data buffer alignment + * + * i.MX27 requires a four byte alignment for transmit and 16 bits + * alignment for receive so take 16 + * Note: Valid for member data_pointer in struct buffer_descriptor + */ +#define DB_DATA_ALIGNMENT 16 + +/** + * @brief Receive & Transmit Buffer Descriptor definitions + * + * Note: The first BD must be aligned (see DB_ALIGNMENT) + */ +struct fec_bd { + uint16_t data_length; /* payload's length in bytes */ + uint16_t status; /* BD's staus (see datasheet) */ + uint32_t data_pointer; /* payload's buffer address */ +}; + +/** + * Supported phy types on this platform + */ +enum xceiver_type { + SEVENWIRE, /* 7-wire */ + MII10, /* MII 10Mbps */ + MII100 /* MII 100Mbps */ +}; + +/** + * @brief i.MX27-FEC private structure + */ +struct fec_priv { + struct ethernet_regs *eth; /* pointer to register'S base */ + enum xceiver_type xcv_type; /* transceiver type */ + struct fec_bd *rbd_base; /* RBD ring */ + int rbd_index; /* next receive BD to read */ + struct fec_bd *tbd_base; /* TBD ring */ + int tbd_index; /* next transmit BD to write */ + bd_t *bd; + void *rdb_ptr; + void *base_ptr; +}; + +/** + * @brief Numbers of buffer descriptors for receiving + * + * The number defines the stocked memory buffers for the receiving task. + * Larger values makes no sense in this limited environment. + */ +#define FEC_RBD_NUM 64 + +/** + * @brief Define the ethernet packet size limit in memory + * + * Note: Do not shrink this number. This will force the FEC to spread larger + * frames in more than one BD. This is nothing to worry about, but the current + * driver can't handle it. + */ +#define FEC_MAX_PKT_SIZE 1536 + +/* Receive BD status bits */ +#define FEC_RBD_EMPTY 0x8000 /* Receive BD status: Buffer is empty */ +#define FEC_RBD_WRAP 0x2000 /* Receive BD status: Last BD in ring */ +/* Receive BD status: Buffer is last in frame (useless here!) */ +#define FEC_RBD_LAST 0x0800 +#define FEC_RBD_MISS 0x0100 /* Receive BD status: Miss bit for prom mode */ +/* Receive BD status: The received frame is broadcast frame */ +#define FEC_RBD_BC 0x0080 +/* Receive BD status: The received frame is multicast frame */ +#define FEC_RBD_MC 0x0040 +#define FEC_RBD_LG 0x0020 /* Receive BD status: Frame length violation */ +#define FEC_RBD_NO 0x0010 /* Receive BD status: Nonoctet align frame */ +#define FEC_RBD_CR 0x0004 /* Receive BD status: CRC error */ +#define FEC_RBD_OV 0x0002 /* Receive BD status: Receive FIFO overrun */ +#define FEC_RBD_TR 0x0001 /* Receive BD status: Frame is truncated */ +#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ + FEC_RBD_OV | FEC_RBD_TR) + +/* Transmit BD status bits */ +#define FEC_TBD_READY 0x8000 /* Tansmit BD status: Buffer is ready */ +#define FEC_TBD_WRAP 0x2000 /* Tansmit BD status: Mark as last BD in ring */ +#define FEC_TBD_LAST 0x0800 /* Tansmit BD status: Buffer is last in frame */ +#define FEC_TBD_TC 0x0400 /* Tansmit BD status: Transmit the CRC */ +#define FEC_TBD_ABC 0x0200 /* Tansmit BD status: Append bad CRC */ + +/* MII-related definitios */ +#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ +#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ +#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ +#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ +#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ +#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ +#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ + +#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ +#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ + +#endif /* __FEC_MXC_H */ diff --git a/include/netdev.h b/include/netdev.h index d8056abd82..3e66586b4f 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -50,6 +50,7 @@ int e1000_initialize(bd_t *bis); int eepro100_initialize(bd_t *bis); int eth_3com_initialize (bd_t * bis); int fec_initialize (bd_t *bis); +int fecmxc_initialize (bd_t *bis); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); int inca_switch_initialize(bd_t *bis); -- 2.25.1