From 0aa6c7df60d0d4a4fa01dc1b185df31ffb2c53f6 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sun, 12 Jun 2016 11:49:46 +0200 Subject: [PATCH] kernel: update kernel 4.4 to version 4.4.13 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas --- include/kernel-version.mk | 4 +- ...bootconsole-wait-for-both-THRE-and-T.patch | 49 ------------ .../ath25/patches-4.4/210-reset_button.patch | 2 +- ...a-round-up-ability-to-the-clock-divi.patch | 10 +-- ...5-Support-for-clock-parent-selection.patch | 8 +- ...54-clk-bcm2835-Add-PWM-clock-support.patch | 2 +- ...off-should-only-update-CM_PLL_ANARST.patch | 43 ---------- ...35-divider-value-has-to-be-1-or-more.patch | 36 --------- ...ectly-enable-fractional-clock-suppor.patch | 6 +- ...bcm2835-clean-up-coding-style-issues.patch | 4 +- ...pose-raw-clock-registers-via-debugfs.patch | 14 ++-- ...ve-use-of-BCM2835_CLOCK_COUNT-in-dri.patch | 4 +- ...ganize-bcm2835_clock_array-assignmen.patch | 4 +- ...m2835-enable-management-of-PCM-clock.patch | 2 +- ...m2835-add-missing-PLL-clock-dividers.patch | 4 +- ...m2835-add-missing-osc-and-per-clocks.patch | 12 +-- .../0266-clk-bcm2835-Fix-PLL-poweron.patch | 6 +- ...m2835-Mark-the-VPU-clock-as-critical.patch | 4 +- ...-GPIO-clocks-enabled-at-boot-as-crit.patch | 4 +- ...-PLLC-clocks-when-deciding-on-a-new-.patch | 4 +- ...fix-cache-flushing-for-highmem-pages.patch | 78 +------------------ .../patches-4.4/206-mips-disable-vdso.patch | 2 +- ...-mips-vdso-dbg-rebuild-after-genvdso.patch | 6 +- ...01-fix_gpio_config_on_linksys_boards.patch | 58 -------------- ...013-owrt-hack-fix-mt7688-cache-issue.patch | 2 +- 25 files changed, 56 insertions(+), 312 deletions(-) delete mode 100644 target/linux/ar71xx/patches-4.4/003-MIPS-ath79-make-bootconsole-wait-for-both-THRE-and-T.patch delete mode 100644 target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-pll_off-should-only-update-CM_PLL_ANARST.patch delete mode 100644 target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-divider-value-has-to-be-1-or-more.patch delete mode 100644 target/linux/mvebu/patches-4.4/001-fix_gpio_config_on_linksys_boards.patch diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 893dc0a698..fe3afde8d1 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -4,11 +4,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .29 LINUX_VERSION-4.1 = .20 -LINUX_VERSION-4.4 = .12 +LINUX_VERSION-4.4 = .13 LINUX_KERNEL_MD5SUM-3.18.29 = b25737a0bc98e80d12200de93f239c28 LINUX_KERNEL_MD5SUM-4.1.20 = 075c38a3a23ca5bc80437b13606df00a -LINUX_KERNEL_MD5SUM-4.4.12 = eed37d7fa5c2095f42f62803fa077c33 +LINUX_KERNEL_MD5SUM-4.4.13 = d70b6959d8db61bcea7070c089aace9b ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/target/linux/ar71xx/patches-4.4/003-MIPS-ath79-make-bootconsole-wait-for-both-THRE-and-T.patch b/target/linux/ar71xx/patches-4.4/003-MIPS-ath79-make-bootconsole-wait-for-both-THRE-and-T.patch deleted file mode 100644 index 2eba263732..0000000000 --- a/target/linux/ar71xx/patches-4.4/003-MIPS-ath79-make-bootconsole-wait-for-both-THRE-and-T.patch +++ /dev/null @@ -1,49 +0,0 @@ -From f1ba020af5076172c9d29006a747ccf40027fedc Mon Sep 17 00:00:00 2001 -Message-Id: -From: Matthias Schiffer -Date: Thu, 24 Mar 2016 15:34:05 +0100 -Subject: [PATCH] MIPS: ath79: make bootconsole wait for both THRE and TEMT - -This makes the ath79 bootconsole behave the same way as the generic 8250 -bootconsole. - -Also waiting for TEMT (transmit buffer is empty) instead of just THRE -(transmit buffer is not full) ensures that all characters have been -transmitted before the real serial driver starts reconfiguring the serial -controller (which would sometimes result in garbage being transmitted.) -This change does not cause a visible performance loss. - -In addition, this seems to fix a hang observed in certain configurations on -many AR7xxx/AR9xxx SoCs during autoconfig of the real serial driver. - -A more complete follow-up patch will disable 8250 autoconfig for ath79 -altogether (the serial controller is detected as a 16550A, which is not -fully compatible with the ath79 serial, and the autoconfig may lead to -undefined behavior on ath79.) - -Cc: -Signed-off-by: Matthias Schiffer ---- - arch/mips/ath79/early_printk.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -31,13 +31,15 @@ static inline void prom_putchar_wait(voi - } while (1); - } - -+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -+ - static void prom_putchar_ar71xx(unsigned char ch) - { - void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); - -- prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); -+ prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY); - __raw_writel(ch, base + UART_TX * 4); -- prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); -+ prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY); - } - - static void prom_putchar_ar933x(unsigned char ch) diff --git a/target/linux/ath25/patches-4.4/210-reset_button.patch b/target/linux/ath25/patches-4.4/210-reset_button.patch index 89853c84bc..34ef46bc52 100644 --- a/target/linux/ath25/patches-4.4/210-reset_button.patch +++ b/target/linux/ath25/patches-4.4/210-reset_button.patch @@ -1,7 +1,7 @@ --- a/arch/mips/ath25/Makefile +++ b/arch/mips/ath25/Makefile @@ -8,7 +8,7 @@ - # Copyright (C) 2006-2009 Felix Fietkau + # Copyright (C) 2006-2009 Felix Fietkau # -obj-y += board.o prom.o devices.o diff --git a/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch b/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch index b83cd8be56..5866df4d38 100644 --- a/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch +++ b/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch @@ -17,7 +17,7 @@ Signed-off-by: Michael Turquette --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1154,22 +1154,24 @@ static int bcm2835_clock_is_on(struct cl +@@ -1164,22 +1164,24 @@ static int bcm2835_clock_is_on(struct cl static u32 bcm2835_clock_choose_div(struct clk_hw *hw, unsigned long rate, @@ -48,9 +48,9 @@ Signed-off-by: Michael Turquette + div += unused_frac_mask + 1; + div &= ~unused_frac_mask; - /* Clamp to the limits. */ - div = max(div, unused_frac_mask + 1); -@@ -1208,7 +1210,7 @@ static long bcm2835_clock_round_rate(str + /* clamp to min divider of 1 */ + div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS); +@@ -1219,7 +1221,7 @@ static long bcm2835_clock_round_rate(str unsigned long *parent_rate) { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); @@ -59,7 +59,7 @@ Signed-off-by: Michael Turquette return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div); } -@@ -1277,7 +1279,7 @@ static int bcm2835_clock_set_rate(struct +@@ -1288,7 +1290,7 @@ static int bcm2835_clock_set_rate(struct struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; diff --git a/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch b/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch index aeb5134ef1..f2221f3d3f 100644 --- a/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch +++ b/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch @@ -24,7 +24,7 @@ Signed-off-by: Michael Turquette --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1205,16 +1205,6 @@ static long bcm2835_clock_rate_from_divi +@@ -1216,16 +1216,6 @@ static long bcm2835_clock_rate_from_divi return temp; } @@ -41,7 +41,7 @@ Signed-off-by: Michael Turquette static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, unsigned long parent_rate) { -@@ -1286,13 +1276,75 @@ static int bcm2835_clock_set_rate(struct +@@ -1297,13 +1287,75 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -118,7 +118,7 @@ Signed-off-by: Michael Turquette }; static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) -@@ -1308,7 +1360,9 @@ static const struct clk_ops bcm2835_vpu_ +@@ -1319,7 +1371,9 @@ static const struct clk_ops bcm2835_vpu_ .is_prepared = bcm2835_vpu_clock_is_on, .recalc_rate = bcm2835_clock_get_rate, .set_rate = bcm2835_clock_set_rate, @@ -129,7 +129,7 @@ Signed-off-by: Michael Turquette }; static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman, -@@ -1402,45 +1456,23 @@ static struct clk *bcm2835_register_cloc +@@ -1413,45 +1467,23 @@ static struct clk *bcm2835_register_cloc { struct bcm2835_clock *clock; struct clk_init_data init; diff --git a/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch b/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch index fc18c6c7d1..b0d2ec2917 100644 --- a/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch +++ b/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch @@ -33,7 +33,7 @@ Signed-off-by: Michael Turquette struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1590,6 +1600,9 @@ static int bcm2835_clk_probe(struct plat +@@ -1601,6 +1611,9 @@ static int bcm2835_clk_probe(struct plat cprman->regs + CM_PERIICTL, CM_GATE_BIT, 0, &cprman->regs_lock); diff --git a/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-pll_off-should-only-update-CM_PLL_ANARST.patch b/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-pll_off-should-only-update-CM_PLL_ANARST.patch deleted file mode 100644 index 6199cbe32b..0000000000 --- a/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-pll_off-should-only-update-CM_PLL_ANARST.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 4d4b769727386c6a1b7274e3083cc6b24364b4fa Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Mon, 29 Feb 2016 11:39:17 +0000 -Subject: [PATCH 256/381] clk: bcm2835: pll_off should only update - CM_PLL_ANARST - -bcm2835_pll_off is currently assigning CM_PLL_ANARST to the control -register, which may lose the other bits that are currently set by the -clock dividers. - -It also now locks during the read/modify/write cycle of both -registers. - -Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the -audio domain clocks") - -Signed-off-by: Martin Sperl -Signed-off-by: Eric Anholt -Reviewed-by: Eric Anholt -(cherry picked from commit 6727f086cfe4ddcc651eb2bf4301abfcf619be06) ---- - drivers/clk/bcm/clk-bcm2835.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -913,8 +913,14 @@ static void bcm2835_pll_off(struct clk_h - struct bcm2835_cprman *cprman = pll->cprman; - const struct bcm2835_pll_data *data = pll->data; - -- cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST); -- cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN); -+ spin_lock(&cprman->regs_lock); -+ cprman_write(cprman, data->cm_ctrl_reg, -+ cprman_read(cprman, data->cm_ctrl_reg) | -+ CM_PLL_ANARST); -+ cprman_write(cprman, data->a2w_ctrl_reg, -+ cprman_read(cprman, data->a2w_ctrl_reg) | -+ A2W_PLL_CTRL_PWRDN); -+ spin_unlock(&cprman->regs_lock); - } - - static int bcm2835_pll_on(struct clk_hw *hw) diff --git a/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-divider-value-has-to-be-1-or-more.patch b/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-divider-value-has-to-be-1-or-more.patch deleted file mode 100644 index 49bbacd955..0000000000 --- a/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-divider-value-has-to-be-1-or-more.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 260572944700ab13fa3f7a68a387556220cef277 Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Mon, 29 Feb 2016 11:39:20 +0000 -Subject: [PATCH 257/381] clk: bcm2835: divider value has to be 1 or more - -Current clamping of a normal divider allows a value < 1 to be valid. - -A divider of < 1 would actually only be possible if we had a PLL... - -So this patch clamps the divider to 1. - -Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the -audio domain clocks") - -Signed-off-by: Martin Sperl -Signed-off-by: Eric Anholt -Reviewed-by: Eric Anholt -(cherry picked from commit 997f16bd5d2e9b3456027f96fcadfe1e2bf12f4e) ---- - drivers/clk/bcm/clk-bcm2835.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1202,8 +1202,9 @@ static u32 bcm2835_clock_choose_div(stru - div += unused_frac_mask + 1; - div &= ~unused_frac_mask; - -- /* Clamp to the limits. */ -- div = max(div, unused_frac_mask + 1); -+ /* clamp to min divider of 1 */ -+ div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS); -+ /* clamp to the highest possible fractional divider */ - div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1, - CM_DIV_FRAC_BITS - data->frac_bits)); - diff --git a/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch b/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch index 8735a9b1e3..73cf8d3abd 100644 --- a/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch +++ b/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch @@ -67,7 +67,7 @@ Reviewed-by: Eric Anholt }; struct bcm2835_pll { -@@ -1192,7 +1196,7 @@ static u32 bcm2835_clock_choose_div(stru +@@ -1196,7 +1200,7 @@ static u32 bcm2835_clock_choose_div(stru GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1; u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS; u64 rem; @@ -76,7 +76,7 @@ Reviewed-by: Eric Anholt rem = do_div(temp, rate); div = temp; -@@ -1202,11 +1206,23 @@ static u32 bcm2835_clock_choose_div(stru +@@ -1206,11 +1210,23 @@ static u32 bcm2835_clock_choose_div(stru div += unused_frac_mask + 1; div &= ~unused_frac_mask; @@ -105,7 +105,7 @@ Reviewed-by: Eric Anholt return div; } -@@ -1300,9 +1316,26 @@ static int bcm2835_clock_set_rate(struct +@@ -1304,9 +1320,26 @@ static int bcm2835_clock_set_rate(struct struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false); diff --git a/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-clean-up-coding-style-issues.patch b/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-clean-up-coding-style-issues.patch index 538ebb7e07..b9d6af5b28 100644 --- a/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-clean-up-coding-style-issues.patch +++ b/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-clean-up-coding-style-issues.patch @@ -33,7 +33,7 @@ Signed-off-by: Eric Anholt const char *osc_name; struct clk_onecell_data onecell; -@@ -1340,7 +1337,7 @@ static int bcm2835_clock_set_rate(struct +@@ -1344,7 +1341,7 @@ static int bcm2835_clock_set_rate(struct } static int bcm2835_clock_determine_rate(struct clk_hw *hw, @@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct clk_hw *parent, *best_parent = NULL; -@@ -1398,7 +1395,6 @@ static u8 bcm2835_clock_get_parent(struc +@@ -1402,7 +1399,6 @@ static u8 bcm2835_clock_get_parent(struc return (src & CM_SRC_MASK) >> CM_SRC_SHIFT; } diff --git a/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch b/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch index 38ff1a65b8..8d301eac80 100644 --- a/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch +++ b/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch @@ -58,7 +58,7 @@ Acked-by: Eric Anholt /* * These are fixed clocks. They're probably not all root clocks and it may * be possible to turn them on and off but until this is mapped out better -@@ -1040,6 +1062,36 @@ static int bcm2835_pll_set_rate(struct c +@@ -1044,6 +1066,36 @@ static int bcm2835_pll_set_rate(struct c return 0; } @@ -95,7 +95,7 @@ Acked-by: Eric Anholt static const struct clk_ops bcm2835_pll_clk_ops = { .is_prepared = bcm2835_pll_is_on, .prepare = bcm2835_pll_on, -@@ -1047,6 +1099,7 @@ static const struct clk_ops bcm2835_pll_ +@@ -1051,6 +1103,7 @@ static const struct clk_ops bcm2835_pll_ .recalc_rate = bcm2835_pll_get_rate, .set_rate = bcm2835_pll_set_rate, .round_rate = bcm2835_pll_round_rate, @@ -103,7 +103,7 @@ Acked-by: Eric Anholt }; struct bcm2835_pll_divider { -@@ -1147,6 +1200,26 @@ static int bcm2835_pll_divider_set_rate( +@@ -1151,6 +1204,26 @@ static int bcm2835_pll_divider_set_rate( return 0; } @@ -130,7 +130,7 @@ Acked-by: Eric Anholt static const struct clk_ops bcm2835_pll_divider_clk_ops = { .is_prepared = bcm2835_pll_divider_is_on, .prepare = bcm2835_pll_divider_on, -@@ -1154,6 +1227,7 @@ static const struct clk_ops bcm2835_pll_ +@@ -1158,6 +1231,7 @@ static const struct clk_ops bcm2835_pll_ .recalc_rate = bcm2835_pll_divider_get_rate, .set_rate = bcm2835_pll_divider_set_rate, .round_rate = bcm2835_pll_divider_round_rate, @@ -138,7 +138,7 @@ Acked-by: Eric Anholt }; /* -@@ -1395,6 +1469,31 @@ static u8 bcm2835_clock_get_parent(struc +@@ -1399,6 +1473,31 @@ static u8 bcm2835_clock_get_parent(struc return (src & CM_SRC_MASK) >> CM_SRC_SHIFT; } @@ -170,7 +170,7 @@ Acked-by: Eric Anholt static const struct clk_ops bcm2835_clock_clk_ops = { .is_prepared = bcm2835_clock_is_on, .prepare = bcm2835_clock_on, -@@ -1404,6 +1503,7 @@ static const struct clk_ops bcm2835_cloc +@@ -1408,6 +1507,7 @@ static const struct clk_ops bcm2835_cloc .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, @@ -178,7 +178,7 @@ Acked-by: Eric Anholt }; static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) -@@ -1422,6 +1522,7 @@ static const struct clk_ops bcm2835_vpu_ +@@ -1426,6 +1526,7 @@ static const struct clk_ops bcm2835_vpu_ .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, diff --git a/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch b/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch index 087eaf1977..0c338ce4a8 100644 --- a/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch +++ b/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch @@ -57,7 +57,7 @@ Reviewed-by: Eric Anholt struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1654,14 +1673,81 @@ static struct clk *bcm2835_register_cloc +@@ -1658,14 +1677,81 @@ static struct clk *bcm2835_register_cloc return devm_clk_register(cprman->dev, &clock->hw); } @@ -140,7 +140,7 @@ Reviewed-by: Eric Anholt if (!cprman) return -ENOMEM; -@@ -1678,80 +1764,15 @@ static int bcm2835_clk_probe(struct plat +@@ -1682,80 +1768,15 @@ static int bcm2835_clk_probe(struct plat platform_set_drvdata(pdev, cprman); diff --git a/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch b/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch index d6887b19cf..b1b574ceaf 100644 --- a/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch +++ b/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch @@ -474,7 +474,7 @@ Reviewed-by: Eric Anholt struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1590,7 +1173,7 @@ bcm2835_register_pll_divider(struct bcm2 +@@ -1594,7 +1177,7 @@ bcm2835_register_pll_divider(struct bcm2 memset(&init, 0, sizeof(init)); @@ -483,7 +483,7 @@ Reviewed-by: Eric Anholt init.num_parents = 1; init.name = divider_name; init.ops = &bcm2835_pll_divider_clk_ops; -@@ -1689,50 +1272,401 @@ struct bcm2835_clk_desc { +@@ -1693,50 +1276,401 @@ struct bcm2835_clk_desc { const void *data; }; diff --git a/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-enable-management-of-PCM-clock.patch b/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-enable-management-of-PCM-clock.patch index c67c80cab9..8e9a441bc4 100644 --- a/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-enable-management-of-PCM-clock.patch +++ b/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-enable-management-of-PCM-clock.patch @@ -17,7 +17,7 @@ Reviewed-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1634,6 +1634,13 @@ static const struct bcm2835_clk_desc clk +@@ -1638,6 +1638,13 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_HSMDIV, .int_bits = 4, .frac_bits = 8), diff --git a/target/linux/brcm2708/patches-4.4/0264-clk-bcm2835-add-missing-PLL-clock-dividers.patch b/target/linux/brcm2708/patches-4.4/0264-clk-bcm2835-add-missing-PLL-clock-dividers.patch index 1b92074202..02385cc4f4 100644 --- a/target/linux/brcm2708/patches-4.4/0264-clk-bcm2835-add-missing-PLL-clock-dividers.patch +++ b/target/linux/brcm2708/patches-4.4/0264-clk-bcm2835-add-missing-PLL-clock-dividers.patch @@ -14,7 +14,7 @@ Reviewed-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1383,6 +1383,22 @@ static const struct bcm2835_clk_desc clk +@@ -1387,6 +1387,22 @@ static const struct bcm2835_clk_desc clk .load_mask = CM_PLLA_LOADPER, .hold_mask = CM_PLLA_HOLDPER, .fixed_divider = 1), @@ -37,7 +37,7 @@ Reviewed-by: Eric Anholt /* PLLB is used for the ARM's clock. */ [BCM2835_PLLB] = REGISTER_PLL( -@@ -1497,6 +1513,22 @@ static const struct bcm2835_clk_desc clk +@@ -1501,6 +1517,22 @@ static const struct bcm2835_clk_desc clk .load_mask = CM_PLLD_LOADPER, .hold_mask = CM_PLLD_HOLDPER, .fixed_divider = 1), diff --git a/target/linux/brcm2708/patches-4.4/0265-clk-bcm2835-add-missing-osc-and-per-clocks.patch b/target/linux/brcm2708/patches-4.4/0265-clk-bcm2835-add-missing-osc-and-per-clocks.patch index d9943ac7da..8be0dce99e 100644 --- a/target/linux/brcm2708/patches-4.4/0265-clk-bcm2835-add-missing-osc-and-per-clocks.patch +++ b/target/linux/brcm2708/patches-4.4/0265-clk-bcm2835-add-missing-osc-and-per-clocks.patch @@ -26,7 +26,7 @@ Reviewed-by: Eric Anholt #define CM_EMMCCTL 0x1c0 #define CM_EMMCDIV 0x1c4 -@@ -1606,6 +1608,12 @@ static const struct bcm2835_clk_desc clk +@@ -1610,6 +1612,12 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_TSENSDIV, .int_bits = 5, .frac_bits = 0), @@ -39,7 +39,7 @@ Reviewed-by: Eric Anholt /* clocks with vpu parent mux */ [BCM2835_CLOCK_H264] = REGISTER_VPU_CLK( -@@ -1620,6 +1628,7 @@ static const struct bcm2835_clk_desc clk +@@ -1624,6 +1632,7 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_ISPDIV, .int_bits = 4, .frac_bits = 8), @@ -47,7 +47,7 @@ Reviewed-by: Eric Anholt /* * Secondary SDRAM clock. Used for low-voltage modes when the PLL * in the SDRAM controller can't be used. -@@ -1651,6 +1660,36 @@ static const struct bcm2835_clk_desc clk +@@ -1655,6 +1664,36 @@ static const struct bcm2835_clk_desc clk .is_vpu_clock = true), /* clocks with per parent mux */ @@ -84,7 +84,7 @@ Reviewed-by: Eric Anholt /* Arasan EMMC clock */ [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( -@@ -1659,6 +1698,29 @@ static const struct bcm2835_clk_desc clk +@@ -1663,6 +1702,29 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_EMMCDIV, .int_bits = 4, .frac_bits = 8), @@ -114,7 +114,7 @@ Reviewed-by: Eric Anholt /* HDMI state machine */ [BCM2835_CLOCK_HSM] = REGISTER_PER_CLK( .name = "hsm", -@@ -1680,12 +1742,26 @@ static const struct bcm2835_clk_desc clk +@@ -1684,12 +1746,26 @@ static const struct bcm2835_clk_desc clk .int_bits = 12, .frac_bits = 12, .is_mash_clock = true), @@ -141,7 +141,7 @@ Reviewed-by: Eric Anholt /* TV encoder clock. Only operating frequency is 108Mhz. */ [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( .name = "vec", -@@ -1694,6 +1770,20 @@ static const struct bcm2835_clk_desc clk +@@ -1698,6 +1774,20 @@ static const struct bcm2835_clk_desc clk .int_bits = 4, .frac_bits = 0), diff --git a/target/linux/brcm2708/patches-4.4/0266-clk-bcm2835-Fix-PLL-poweron.patch b/target/linux/brcm2708/patches-4.4/0266-clk-bcm2835-Fix-PLL-poweron.patch index 6762263d76..fcc950df0f 100644 --- a/target/linux/brcm2708/patches-4.4/0266-clk-bcm2835-Fix-PLL-poweron.patch +++ b/target/linux/brcm2708/patches-4.4/0266-clk-bcm2835-Fix-PLL-poweron.patch @@ -19,9 +19,9 @@ Signed-off-by: Stephen Boyd --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -557,6 +557,10 @@ static int bcm2835_pll_on(struct clk_hw - const struct bcm2835_pll_data *data = pll->data; - ktime_t timeout; +@@ -561,6 +561,10 @@ static int bcm2835_pll_on(struct clk_hw + cprman_read(cprman, data->a2w_ctrl_reg) & + ~A2W_PLL_CTRL_PWRDN); + cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) & diff --git a/target/linux/brcm2708/patches-4.4/0349-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch b/target/linux/brcm2708/patches-4.4/0349-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch index 2275957a3b..95bcb497f5 100644 --- a/target/linux/brcm2708/patches-4.4/0349-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch +++ b/target/linux/brcm2708/patches-4.4/0349-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch @@ -27,7 +27,7 @@ Signed-off-by: Eric Anholt bool is_vpu_clock; bool is_mash_clock; }; -@@ -1242,7 +1244,7 @@ static struct clk *bcm2835_register_cloc +@@ -1246,7 +1248,7 @@ static struct clk *bcm2835_register_cloc init.parent_names = parents; init.num_parents = data->num_mux_parents; init.name = data->name; @@ -36,7 +36,7 @@ Signed-off-by: Eric Anholt if (data->is_vpu_clock) { init.ops = &bcm2835_vpu_clock_clk_ops; -@@ -1661,6 +1663,7 @@ static const struct bcm2835_clk_desc clk +@@ -1665,6 +1667,7 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_VPUDIV, .int_bits = 12, .frac_bits = 8, diff --git a/target/linux/brcm2708/patches-4.4/0350-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.4/0350-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch index a4708f9eff..01c1c1b64e 100644 --- a/target/linux/brcm2708/patches-4.4/0350-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch +++ b/target/linux/brcm2708/patches-4.4/0350-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch @@ -20,7 +20,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1246,6 +1246,15 @@ static struct clk *bcm2835_register_cloc +@@ -1250,6 +1250,15 @@ static struct clk *bcm2835_register_cloc init.name = data->name; init.flags = data->flags | CLK_IGNORE_UNUSED; @@ -36,7 +36,7 @@ Signed-off-by: Eric Anholt if (data->is_vpu_clock) { init.ops = &bcm2835_vpu_clock_clk_ops; } else { -@@ -1720,13 +1729,15 @@ static const struct bcm2835_clk_desc clk +@@ -1724,13 +1733,15 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_GP1DIV, .int_bits = 12, .frac_bits = 12, diff --git a/target/linux/brcm2708/patches-4.4/0351-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch b/target/linux/brcm2708/patches-4.4/0351-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch index 634db51224..d8c80918e4 100644 --- a/target/linux/brcm2708/patches-4.4/0351-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch +++ b/target/linux/brcm2708/patches-4.4/0351-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch @@ -22,7 +22,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1020,16 +1020,28 @@ static int bcm2835_clock_set_rate(struct +@@ -1024,16 +1024,28 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -51,7 +51,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain /* * Select parent clock that results in the closest but lower rate */ -@@ -1037,6 +1049,17 @@ static int bcm2835_clock_determine_rate( +@@ -1041,6 +1053,17 @@ static int bcm2835_clock_determine_rate( parent = clk_hw_get_parent_by_index(hw, i); if (!parent) continue; diff --git a/target/linux/generic/patches-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch b/target/linux/generic/patches-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch index 237f0e500c..e4ac2cd583 100644 --- a/target/linux/generic/patches-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch +++ b/target/linux/generic/patches-4.4/101-MIPS-fix-cache-flushing-for-highmem-pages.patch @@ -15,87 +15,17 @@ Signed-off-by: Felix Fietkau --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -78,18 +79,29 @@ SYSCALL_DEFINE3(cacheflush, unsigned lon - return 0; - } - -+static void -+flush_highmem_page(struct page *page) -+{ -+ void *addr = kmap_atomic(page); -+ flush_data_cache_page((unsigned long)addr); -+ kunmap_atomic(addr); -+} -+ - void __flush_dcache_page(struct page *page) - { - struct address_space *mapping = page_mapping(page); - unsigned long addr; - -- if (PageHighMem(page)) -- return; - if (mapping && !mapping_mapped(mapping)) { - SetPageDcacheDirty(page); - return; - } - -+ if (PageHighMem(page)) { -+ flush_highmem_page(page); -+ return; -+ } -+ - /* - * We could delay the flush for the !page_mapping case too. But that - * case is for exec env/arg pages and those are %99 certainly going to -@@ -105,6 +117,11 @@ void __flush_anon_page(struct page *page +@@ -111,6 +111,13 @@ void __flush_anon_page(struct page *page { unsigned long addr = (unsigned long) page_address(page); + if (PageHighMem(page)) { -+ flush_highmem_page(page); ++ addr = (unsigned long)kmap_atomic(page); ++ flush_data_cache_page(addr); ++ __kunmap_atomic((void *)addr); + return; + } + if (pages_do_alias(addr, vmaddr)) { if (page_mapped(page) && !Page_dcache_dirty(page)) { void *kaddr; -@@ -123,8 +140,10 @@ void __flush_icache_page(struct vm_area_ - { - unsigned long addr; - -- if (PageHighMem(page)) -+ if (PageHighMem(page)) { -+ flush_highmem_page(page); - return; -+ } - - addr = (unsigned long) page_address(page); - flush_data_cache_page(addr); -@@ -142,12 +161,17 @@ void __update_cache(struct vm_area_struc - if (unlikely(!pfn_valid(pfn))) - return; - page = pfn_to_page(pfn); -- if (page_mapping(page) && Page_dcache_dirty(page)) { -+ if (!Page_dcache_dirty(page) || !page_mapping(page)) -+ return; -+ -+ if (PageHighMem(page)) { -+ flush_highmem_page(page); -+ } else { - addr = (unsigned long) page_address(page); - if (exec || pages_do_alias(addr, address & PAGE_MASK)) - flush_data_cache_page(addr); -- ClearPageDcacheDirty(page); - } -+ ClearPageDcacheDirty(page); - } - - unsigned long _page_cachable_default; diff --git a/target/linux/generic/patches-4.4/206-mips-disable-vdso.patch b/target/linux/generic/patches-4.4/206-mips-disable-vdso.patch index 1abe78f141..51b1d041bf 100644 --- a/target/linux/generic/patches-4.4/206-mips-disable-vdso.patch +++ b/target/linux/generic/patches-4.4/206-mips-disable-vdso.patch @@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile -@@ -26,11 +26,11 @@ aflags-vdso := $(ccflags-vdso) \ +@@ -28,11 +28,11 @@ aflags-vdso := $(ccflags-vdso) \ # the comments on that file. # ifndef CONFIG_CPU_MIPSR6 diff --git a/target/linux/generic/patches-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch b/target/linux/generic/patches-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch index ed0445cecf..7dbde1d974 100644 --- a/target/linux/generic/patches-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch +++ b/target/linux/generic/patches-4.4/207-mips-vdso-dbg-rebuild-after-genvdso.patch @@ -1,6 +1,6 @@ --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile -@@ -75,7 +75,7 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-v +@@ -77,7 +77,7 @@ $(obj-vdso): KBUILD_AFLAGS := $(aflags-v $(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi) @@ -9,7 +9,7 @@ $(call if_changed,vdsold) $(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE -@@ -109,7 +109,7 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := +@@ -111,7 +111,7 @@ $(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := $(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE $(call if_changed_dep,cpp_lds_S) @@ -18,7 +18,7 @@ $(call if_changed,vdsold) $(obj)/vdso-o32-image.c: VDSO_NAME := o32 -@@ -145,7 +145,7 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := +@@ -147,7 +147,7 @@ $(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := $(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE $(call if_changed_dep,cpp_lds_S) diff --git a/target/linux/mvebu/patches-4.4/001-fix_gpio_config_on_linksys_boards.patch b/target/linux/mvebu/patches-4.4/001-fix_gpio_config_on_linksys_boards.patch deleted file mode 100644 index c92a1d73ef..0000000000 --- a/target/linux/mvebu/patches-4.4/001-fix_gpio_config_on_linksys_boards.patch +++ /dev/null @@ -1,58 +0,0 @@ -Some of the GPIO configs were wrong in the submitted DTS files, -this patch fixes all affected boards. - -Signed-off-by: Imre Kaloz - -Cc: # v4.1 + ---- - arch/arm/boot/dts/armada-385-linksys.dtsi | 6 +++--- - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++-- - 2 files changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-385-linksys.dtsi -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -245,7 +245,7 @@ - button@2 { - label = "Factory Reset Button"; - linux,code = ; -- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - -@@ -260,7 +260,7 @@ - }; - - sata { -- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; -@@ -313,7 +313,7 @@ - - &pinctrl { - keys_pin: keys-pin { -- marvell,pins = "mpp24", "mpp47"; -+ marvell,pins = "mpp24", "mpp29"; - marvell,function = "gpio"; - }; - ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -304,13 +304,13 @@ - button@1 { - label = "WPS"; - linux,code = ; -- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Factory Reset Button"; - linux,code = ; -- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - }; - }; - diff --git a/target/linux/ramips/patches-4.4/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.4/0013-owrt-hack-fix-mt7688-cache-issue.patch index b094b8840e..c9bba2a9dd 100644 --- a/target/linux/ramips/patches-4.4/0013-owrt-hack-fix-mt7688-cache-issue.patch +++ b/target/linux/ramips/patches-4.4/0013-owrt-hack-fix-mt7688-cache-issue.patch @@ -18,7 +18,7 @@ Signed-off-by: John Crispin sparse_init(); plat_swiotlb_setup(); paging_init(); -@@ -806,6 +805,7 @@ void __init setup_arch(char **cmdline_p) +@@ -809,6 +808,7 @@ void __init setup_arch(char **cmdline_p) prefill_possible_map(); cpu_cache_init(); -- 2.25.1