From 0a0f23142ffd39954c84af3554f8026e2b8de848 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Tue, 2 Apr 2019 19:19:06 +0200 Subject: [PATCH] configs: define CONFIG_SPL_SIZE_LIMIT A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define the board specific maximum size for the SPL file. Use Makefile function size_check() to implement the test. Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following is thrown: spl/u-boot-spl.bin exceeds file size limit: limit: 30720 bytes actual: 33426 bytes excess: 2706 bytes make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1 Signed-off-by: Heinrich Schuchardt --- Kconfig | 8 ++++++++ Makefile | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/Kconfig b/Kconfig index a02168690f..709912e134 100644 --- a/Kconfig +++ b/Kconfig @@ -173,6 +173,14 @@ config TPL_SYS_MALLOC_F_LEN particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. +config SPL_SIZE_LIMIT + int "Maximum size of SPL image" + depends on SPL + default 0 + help + Specifies the maximum length of the U-Boot SPL image. + If this value is zero, it is ignored. + menuconfig EXPERT bool "Configure standard U-Boot features (expert users)" default y diff --git a/Makefile b/Makefile index af2ab4e019..da8a38da63 100644 --- a/Makefile +++ b/Makefile @@ -796,6 +796,12 @@ else BOARD_SIZE_CHECK = endif +ifneq ($(CONFIG_SPL_SIZE_LIMIT),0) +SPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_SPL_SIZE_LIMIT)) +else +SPL_SIZE_CHECK = +endif + # Statically apply RELA-style relocations (currently arm64 only) # This is useful for arm64 where static relocation needs to be performed on # the raw binary, but certain simulators only accept an ELF file (but don't @@ -1712,6 +1718,8 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: + $(SPL_SIZE_CHECK) + spl/u-boot-spl: tools prepare \ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) -- 2.25.1