From 09cfa8ee6aa5c2a126da402af85fbfdcbf9cce06 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Mon, 1 Jun 2015 18:37:25 +0530 Subject: [PATCH] colibri_vf: Enable board specific USB initialisation for USB pen gpio Add IOMUX for the pad used as USB pen. This needs to be driven low for the Iris and Viola boards where it is pulled up high by default. This is required for the USB host functionality to work on these boards. Use the board specific weak initialisation function, to drive the pin low which would be called on "usb start". Signed-off-by: Sanchayan Maity --- arch/arm/include/asm/arch-vf610/iomux-vf610.h | 1 + board/toradex/colibri_vf/colibri_vf.c | 25 +++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h index b8b22b1308..019307b2f9 100644 --- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h +++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h @@ -131,6 +131,7 @@ enum { VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), VF610_PAD_PTD2__QSPI0_A_DATA3 = IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), VF610_PAD_PTD3__QSPI0_A_DATA2 = IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), + VF610_PAD_PTD4__GPIO_83 = IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL), VF610_PAD_PTD4__QSPI0_A_DATA1 = IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), VF610_PAD_PTD5__QSPI0_A_DATA0 = IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL), diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 7173022395..8618fd068c 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -20,6 +20,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -32,6 +33,12 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE) +#define USB_PEN_GPIO 83 + +static const iomux_v3_cfg_t usb_pads[] = { + VF610_PAD_PTD4__GPIO_83, +}; + int dram_init(void) { static const struct ddr3_jedec_timings timings = { @@ -464,3 +471,21 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) return 0; } + +#ifdef CONFIG_USB_EHCI_VF +int board_ehci_hcd_init(int port) +{ + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); + + switch (port) { + case 0: + /* USBC does not have PEN, also configured as USB client only */ + break; + case 1: + gpio_request(USB_PEN_GPIO, "usb-pen-gpio"); + gpio_direction_output(USB_PEN_GPIO, 0); + break; + } + return 0; +} +#endif -- 2.25.1