From 09c04c20962afd25ce5797e263906f84de5b1f4c Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 22 Mar 2011 22:49:13 -0500 Subject: [PATCH] Remove instances of phy_read/write There were a few files which were already using phy_read and phy_write for their PHY function names. It's only a few places, and the name seems most appropriate for the high-level abstraction, so let's rename the other versions to something more specific. Also, uec_phy.c had a marvell_init function which I renamed to not conflict with the one in marvell.c Lastly, uec_phy.c was putting a space between the phy writing function names, and the open paren, so I fixed that Signed-off-by: Andy Fleming Acked-by: Detlev Zundel --- drivers/net/dm9000x.c | 18 ++--- drivers/net/enc28j60.c | 24 +++---- drivers/net/uli526x.c | 24 +++---- drivers/qe/uec.c | 3 - drivers/qe/uec_phy.c | 145 +++++++++++++++++++++-------------------- 5 files changed, 107 insertions(+), 107 deletions(-) diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index 709f67aac2..b5c55738f7 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -110,8 +110,8 @@ static board_info_t dm9000_info; /* function declaration ------------------------------------- */ static int dm9000_probe(void); -static u16 phy_read(int); -static void phy_write(int, u16); +static u16 dm9000_phy_read(int); +static void dm9000_phy_write(int, u16); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -361,7 +361,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) DM9000_iow(DM9000_IMR, IMR_PAR); i = 0; - while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */ + while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */ udelay(1000); i++; if (i == 10000) { @@ -371,7 +371,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) } /* see what we've got */ - lnk = phy_read(17) >> 12; + lnk = dm9000_phy_read(17) >> 12; printf("operating at "); switch (lnk) { case 1: @@ -445,7 +445,7 @@ static void dm9000_halt(struct eth_device *netdev) DM9000_DBG("%s\n", __func__); /* RESET devie */ - phy_write(0, 0x8000); /* PHY RESET */ + dm9000_phy_write(0, 0x8000); /* PHY RESET */ DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */ DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */ DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */ @@ -581,7 +581,7 @@ DM9000_iow(int reg, u8 value) Read a word from phyxcer */ static u16 -phy_read(int reg) +dm9000_phy_read(int reg) { u16 val; @@ -593,7 +593,7 @@ phy_read(int reg) val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL); /* The read data keeps on REG_0D & REG_0E */ - DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val); + DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val); return val; } @@ -601,7 +601,7 @@ phy_read(int reg) Write a word to phyxcer */ static void -phy_write(int reg, u16 value) +dm9000_phy_write(int reg, u16 value) { /* Fill the phyxcer register into REG_0C */ @@ -613,7 +613,7 @@ phy_write(int reg, u16 value) DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */ udelay(500); /* Wait write complete */ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value); + DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); } int dm9000_initialize(bd_t *bis) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 6c161b632f..d55cacdac8 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -314,7 +314,7 @@ static void enc_release_bus(enc_dev_t *enc) /* * Read PHY register */ -static u16 phy_read(enc_dev_t *enc, const u8 addr) +static u16 enc_phy_read(enc_dev_t *enc, const u8 addr) { uint64_t etime; u8 status; @@ -339,7 +339,7 @@ static u16 phy_read(enc_dev_t *enc, const u8 addr) /* * Write PHY register */ -static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data) +static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data) { uint64_t etime; u8 status; @@ -374,7 +374,7 @@ static int enc_phy_link_wait(enc_dev_t *enc) #ifdef CONFIG_ENC_SILENTLINK /* check if we have a link, then just return */ - status = phy_read(enc, PHY_REG_PHSTAT1); + status = enc_phy_read(enc, PHY_REG_PHSTAT1); if (status & ENC_PHSTAT1_LLSTAT) return 0; #endif @@ -382,10 +382,10 @@ static int enc_phy_link_wait(enc_dev_t *enc) /* wait for link with 1 second timeout */ etime = get_ticks() + get_tbclk(); while (get_ticks() <= etime) { - status = phy_read(enc, PHY_REG_PHSTAT1); + status = enc_phy_read(enc, PHY_REG_PHSTAT1); if (status & ENC_PHSTAT1_LLSTAT) { /* now we have a link */ - status = phy_read(enc, PHY_REG_PHSTAT2); + status = enc_phy_read(enc, PHY_REG_PHSTAT2); duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0; printf("%s: link up, 10Mbps %s-duplex\n", enc->dev->name, duplex ? "full" : "half"); @@ -678,8 +678,8 @@ static int enc_setup(enc_dev_t *enc) enc->bank = 0xff; /* invalidate current bank in enc28j60 */ /* verify PHY identification */ - phid1 = phy_read(enc, PHY_REG_PHID1); - phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK; + phid1 = enc_phy_read(enc, PHY_REG_PHID1); + phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK; if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) { printf("%s: failed to identify PHY. Found %04x:%04x\n", enc->dev->name, phid1, phid2); @@ -694,7 +694,7 @@ static int enc_setup(enc_dev_t *enc) * Prevent automatic loopback of data beeing transmitted by setting * ENC_PHCON2_HDLDIS */ - phy_write(enc, PHY_REG_PHCON2, (1<<8)); + enc_phy_write(enc, PHY_REG_PHCON2, (1<<8)); /* * LEDs configuration @@ -702,10 +702,10 @@ static int enc_setup(enc_dev_t *enc) * LEDB: LBCFG = 0111 -> display TX & RX activity * STRCH = 1 -> LED pulses */ - phy_write(enc, PHY_REG_PHLCON, 0x0472); + enc_phy_write(enc, PHY_REG_PHLCON, 0x0472); /* Reset PDPXMD-bit => half duplex */ - phy_write(enc, PHY_REG_PHCON1, 0); + enc_phy_write(enc, PHY_REG_PHCON1, 0); #ifdef CONFIG_USE_IRQ /* enable interrupts */ @@ -771,7 +771,7 @@ int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value) enc_release_bus(enc); return -1; } - *value = phy_read(enc, reg); + *value = enc_phy_read(enc, reg); enc_release_bus(enc); return 0; } @@ -796,7 +796,7 @@ int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value) enc_release_bus(enc); return -1; } - phy_write(enc, reg, value); + enc_phy_write(enc, reg, value); enc_release_bus(enc); return 0; } diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index a4624e1734..5933bddce5 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -175,9 +175,9 @@ static u16 read_srom_word(long, int); static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); -static u16 phy_read(unsigned long, u8, u8, u32); +static u16 uli_phy_read(unsigned long, u8, u8, u32); static u16 phy_readby_cr10(unsigned long, u8, u8); -static void phy_write(unsigned long, u8, u8, u16, u32); +static void uli_phy_write(unsigned long, u8, u8, u16, u32); static void phy_writeby_cr10(unsigned long, u8, u8, u16); static void phy_write_1bit(unsigned long, u32, u32); static u16 phy_read_1bit(unsigned long, u32); @@ -349,7 +349,7 @@ static void uli526x_disable(struct eth_device *dev) /* Reset & stop ULI526X board */ outl(ULI526X_RESET, db->ioaddr + DCR0); udelay(5); - phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); /* reset the board */ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ @@ -385,7 +385,7 @@ static void uli526x_init(struct eth_device *dev) db->tx_packet_cnt = 0; for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) { /* peer add */ - phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); + phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); if (phy_value != 0xffff && phy_value != 0) { db->phy_addr = phy_tmp; break; @@ -404,10 +404,10 @@ static void uli526x_init(struct eth_device *dev) if (!(inl(db->ioaddr + DCR12) & 0x8)) { /* Phyxcer capability setting */ - phy_reg_reset = phy_read(db->ioaddr, + phy_reg_reset = uli_phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); - phy_write(db->ioaddr, db->phy_addr, 0, + uli_phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); udelay(500); @@ -781,7 +781,8 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) u16 phy_reg; /* Phyxcer capability setting */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + phy_reg = uli_phy_read(db->ioaddr, + db->phy_addr, 4, db->chip_id) & ~0x01e0; if (db->media_mode & ULI526X_AUTO) { /* AUTO Mode */ @@ -802,10 +803,10 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) phy_reg |= db->PHY_reg4; db->media_mode |= ULI526X_AUTO; } - phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); /* Restart Auto-Negotiation */ - phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); udelay(50); } @@ -813,7 +814,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) * Write a word to Phy register */ -static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, +static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) { u16 i; @@ -862,7 +863,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, * Read a word data from phy register */ -static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset, + u32 chip_id) { int i; u16 phy_data; diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 811e3fc315..cd80f83522 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -67,9 +67,6 @@ static uec_info_t uec_info[] = { static struct eth_device *devlist[MAXCONTROLLERS]; -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); - static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) { uec_t *uec_regs; diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 55c2622942..c83ca4b582 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -121,8 +121,8 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info); static int genmii_config_aneg (struct uec_mii_info *mii_info); static int genmii_update_link (struct uec_mii_info *mii_info); static int genmii_read_status (struct uec_mii_info *mii_info); -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); +u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum); +void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ @@ -242,7 +242,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) advertise = mii_info->advertising; /* Setup standard advertisement */ - adv = phy_read (mii_info, MII_ADVERTISE); + adv = uec_phy_read(mii_info, MII_ADVERTISE); adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; @@ -252,7 +252,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; - phy_write (mii_info, MII_ADVERTISE, adv); + uec_phy_write(mii_info, MII_ADVERTISE, adv); } static void genmii_setup_forced (struct uec_mii_info *mii_info) @@ -260,7 +260,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) u16 ctrl; u32 features = mii_info->phyinfo->features; - ctrl = phy_read (mii_info, MII_BMCR); + ctrl = uec_phy_read(mii_info, MII_BMCR); ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); @@ -290,7 +290,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) break; } - phy_write (mii_info, MII_BMCR, ctrl); + uec_phy_write(mii_info, MII_BMCR, ctrl); } /* Enable and Restart Autonegotiation */ @@ -298,9 +298,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info) { u16 ctl; - ctl = phy_read (mii_info, MII_BMCR); + ctl = uec_phy_read(mii_info, MII_BMCR); ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write (mii_info, MII_BMCR, ctl); + uec_phy_write(mii_info, MII_BMCR, ctl); } static int gbit_config_aneg (struct uec_mii_info *mii_info) @@ -313,14 +313,14 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info) config_genmii_advert (mii_info); advertise = mii_info->advertising; - adv = phy_read (mii_info, MII_CTRL1000); + adv = uec_phy_read(mii_info, MII_CTRL1000); adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); if (advertise & SUPPORTED_1000baseT_Half) adv |= ADVERTISE_1000HALF; if (advertise & SUPPORTED_1000baseT_Full) adv |= ADVERTISE_1000FULL; - phy_write (mii_info, MII_CTRL1000, adv); + uec_phy_write(mii_info, MII_CTRL1000, adv); /* Start/Restart aneg */ genmii_restart_aneg (mii_info); @@ -335,13 +335,13 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info) /* The Marvell PHY has an errata which requires * that certain registers get written in order * to restart autonegotiation */ - phy_write (mii_info, MII_BMCR, BMCR_RESET); + uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); - phy_write (mii_info, 0x1d, 0x1f); - phy_write (mii_info, 0x1e, 0x200c); - phy_write (mii_info, 0x1d, 0x5); - phy_write (mii_info, 0x1e, 0); - phy_write (mii_info, 0x1e, 0x100); + uec_phy_write(mii_info, 0x1d, 0x1f); + uec_phy_write(mii_info, 0x1e, 0x200c); + uec_phy_write(mii_info, 0x1d, 0x5); + uec_phy_write(mii_info, 0x1e, 0); + uec_phy_write(mii_info, 0x1e, 0x100); gbit_config_aneg (mii_info); @@ -373,13 +373,13 @@ static int genmii_update_link (struct uec_mii_info *mii_info) u16 status; /* Status is read once to clear old link state */ - phy_read (mii_info, MII_BMSR); + uec_phy_read(mii_info, MII_BMSR); /* * Wait if the link is up, and autonegotiation is in progress * (ie - we're capable and it's not done) */ - status = phy_read(mii_info, MII_BMSR); + status = uec_phy_read(mii_info, MII_BMSR); if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE) && !(status & BMSR_ANEGCOMPLETE)) { int i = 0; @@ -395,7 +395,7 @@ static int genmii_update_link (struct uec_mii_info *mii_info) i++; udelay(1000); /* 1 ms */ - status = phy_read(mii_info, MII_BMSR); + status = uec_phy_read(mii_info, MII_BMSR); } mii_info->link = 1; } else { @@ -420,7 +420,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info) return err; if (mii_info->autoneg) { - status = phy_read(mii_info, MII_STAT1000); + status = uec_phy_read(mii_info, MII_STAT1000); if (status & (LPA_1000FULL | LPA_1000HALF)) { mii_info->speed = SPEED_1000; @@ -429,7 +429,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info) else mii_info->duplex = DUPLEX_HALF; } else { - status = phy_read(mii_info, MII_LPA); + status = uec_phy_read(mii_info, MII_LPA); if (status & (LPA_10FULL | LPA_100FULL)) mii_info->duplex = DUPLEX_FULL; @@ -463,25 +463,25 @@ static int bcm_init(struct uec_mii_info *mii_info) /* Wait for aneg to complete. */ do - val = phy_read(mii_info, MII_BMSR); + val = uec_phy_read(mii_info, MII_BMSR); while (--cnt && !(val & BMSR_ANEGCOMPLETE)); /* Set RDX clk delay. */ - phy_write(mii_info, 0x18, 0x7 | (7 << 12)); + uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12)); - val = phy_read(mii_info, 0x18); + val = uec_phy_read(mii_info, 0x18); /* Set RDX-RXC skew. */ val |= (1 << 8); val |= (7 | (7 << 12)); /* Write bits 14:0. */ val |= (1 << 15); - phy_write(mii_info, 0x18, val); + uec_phy_write(mii_info, 0x18, val); } return 0; } -static int marvell_init(struct uec_mii_info *mii_info) +static int uec_marvell_init(struct uec_mii_info *mii_info) { struct eth_device *edev = mii_info->dev; uec_private_t *uec = edev->priv; @@ -494,7 +494,7 @@ static int marvell_init(struct uec_mii_info *mii_info) iface == RGMII_TXID)) { int temp; - temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR); + temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR); if (iface == RGMII_ID) { temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY; } else if (iface == RGMII_RXID) { @@ -504,14 +504,14 @@ static int marvell_init(struct uec_mii_info *mii_info) temp &= ~MII_M1111_RX_DELAY; temp |= MII_M1111_TX_DELAY; } - phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); + uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); - temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR); + temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR); temp &= ~MII_M1111_HWCFG_MODE_MASK; temp |= MII_M1111_HWCFG_MODE_RGMII; - phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); + uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); - phy_write(mii_info, MII_BMCR, BMCR_RESET); + uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); } return 0; @@ -534,7 +534,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info) if (mii_info->autoneg && mii_info->link) { int speed; - status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS); + status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); /* Get the duplexity */ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) @@ -564,7 +564,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info) static int marvell_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupts by reading the reg */ - phy_read (mii_info, MII_M1011_IEVENT); + uec_phy_read(mii_info, MII_M1011_IEVENT); return 0; } @@ -572,9 +572,10 @@ static int marvell_ack_interrupt (struct uec_mii_info *mii_info) static int marvell_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); else - phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + uec_phy_write(mii_info, MII_M1011_IMASK, + MII_M1011_IMASK_CLEAR); return 0; } @@ -582,13 +583,13 @@ static int marvell_config_intr (struct uec_mii_info *mii_info) static int dm9161_init (struct uec_mii_info *mii_info) { /* Reset the PHY */ - phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) | + uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) | BMCR_RESET); /* PHY and MAC connect */ - phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) & + uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); - phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); config_genmii_advert (mii_info); /* Start/restart aneg */ @@ -614,7 +615,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info) /* If the link is up, read the speed and duplex If we aren't autonegotiating assume speeds are as set */ if (mii_info->autoneg && mii_info->link) { - status = phy_read (mii_info, MII_DM9161_SCSR); + status = uec_phy_read(mii_info, MII_DM9161_SCSR); if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) mii_info->speed = SPEED_100; else @@ -632,7 +633,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info) static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupt by reading the reg */ - phy_read (mii_info, MII_DM9161_INTR); + uec_phy_read(mii_info, MII_DM9161_INTR); return 0; } @@ -640,9 +641,9 @@ static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) static int dm9161_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); else - phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); return 0; } @@ -696,7 +697,7 @@ static int smsc_read_status (struct uec_mii_info *mii_info) if (mii_info->autoneg && mii_info->link) { int val; - status = phy_read (mii_info, 0x1f); + status = uec_phy_read(mii_info, 0x1f); val = (status & 0x1c) >> 2; switch (val) { @@ -751,7 +752,7 @@ static struct phy_info phy_info_marvell = { .phy_id_mask = 0xffffff00, .name = "Marvell 88E11x1", .features = MII_GBIT_FEATURES, - .init = &marvell_init, + .init = &uec_marvell_init, .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -804,12 +805,12 @@ static struct phy_info *phy_info[] = { NULL }; -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum) +u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum) { return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum); } -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) +void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val) { mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val); } @@ -825,11 +826,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) struct phy_info *theInfo = NULL; /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read (mii_info, MII_PHYSID1); + phy_reg = uec_phy_read(mii_info, MII_PHYSID1); phy_ID = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read (mii_info, MII_PHYSID2); + phy_reg = uec_phy_read(mii_info, MII_PHYSID2); phy_ID |= (phy_reg & 0xffff); /* loop through all the known PHY types, and find one that */ @@ -869,39 +870,39 @@ void marvell_phy_interface_mode (struct eth_device *dev, if (type == RGMII) { if (speed == 100) { - phy_write (mii_info, 0x00, 0x9140); - phy_write (mii_info, 0x1d, 0x001f); - phy_write (mii_info, 0x1e, 0x200c); - phy_write (mii_info, 0x1d, 0x0005); - phy_write (mii_info, 0x1e, 0x0000); - phy_write (mii_info, 0x1e, 0x0100); - phy_write (mii_info, 0x09, 0x0e00); - phy_write (mii_info, 0x04, 0x01e1); - phy_write (mii_info, 0x00, 0x9140); - phy_write (mii_info, 0x00, 0x1000); + uec_phy_write(mii_info, 0x00, 0x9140); + uec_phy_write(mii_info, 0x1d, 0x001f); + uec_phy_write(mii_info, 0x1e, 0x200c); + uec_phy_write(mii_info, 0x1d, 0x0005); + uec_phy_write(mii_info, 0x1e, 0x0000); + uec_phy_write(mii_info, 0x1e, 0x0100); + uec_phy_write(mii_info, 0x09, 0x0e00); + uec_phy_write(mii_info, 0x04, 0x01e1); + uec_phy_write(mii_info, 0x00, 0x9140); + uec_phy_write(mii_info, 0x00, 0x1000); udelay (100000); - phy_write (mii_info, 0x00, 0x2900); - phy_write (mii_info, 0x14, 0x0cd2); - phy_write (mii_info, 0x00, 0xa100); - phy_write (mii_info, 0x09, 0x0000); - phy_write (mii_info, 0x1b, 0x800b); - phy_write (mii_info, 0x04, 0x05e1); - phy_write (mii_info, 0x00, 0xa100); - phy_write (mii_info, 0x00, 0x2100); + uec_phy_write(mii_info, 0x00, 0x2900); + uec_phy_write(mii_info, 0x14, 0x0cd2); + uec_phy_write(mii_info, 0x00, 0xa100); + uec_phy_write(mii_info, 0x09, 0x0000); + uec_phy_write(mii_info, 0x1b, 0x800b); + uec_phy_write(mii_info, 0x04, 0x05e1); + uec_phy_write(mii_info, 0x00, 0xa100); + uec_phy_write(mii_info, 0x00, 0x2100); udelay (1000000); } else if (speed == 10) { - phy_write (mii_info, 0x14, 0x8e40); - phy_write (mii_info, 0x1b, 0x800b); - phy_write (mii_info, 0x14, 0x0c82); - phy_write (mii_info, 0x00, 0x8100); + uec_phy_write(mii_info, 0x14, 0x8e40); + uec_phy_write(mii_info, 0x1b, 0x800b); + uec_phy_write(mii_info, 0x14, 0x0c82); + uec_phy_write(mii_info, 0x00, 0x8100); udelay (1000000); } } /* handle 88e1111 rev.B2 erratum 5.6 */ if (mii_info->autoneg) { - status = phy_read (mii_info, MII_BMCR); - phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE); + status = uec_phy_read(mii_info, MII_BMCR); + uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE); } /* now the B2 will correctly report autoneg completion status */ } -- 2.25.1