From 07bae1de382723b94244096953b05225572728cd Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Thu, 31 Oct 2019 18:54:22 +0800 Subject: [PATCH] mmc: fsl_esdhc: clean up bus width configuration code This patch is to clean up bus width setting code. - For DM_MMC, remove getting "bus-width" from device tree. This has been done in mmc_of_parse(). - For non-DM_MMC, move bus width configuration from fsl_esdhc_init() to fsl_esdhc_initialize() which is non-DM_MMC specific. And fix up bus width configuration to support only 1-bit, 4-bit, or 8-bit. Keep using 8-bit if it's not set because many platforms use driver without providing max bus width. - Remove bus_width member from fsl_esdhc_priv structure. Signed-off-by: Yangbo Lu --- drivers/mmc/fsl_esdhc.c | 70 +++++++++++++---------------------------- 1 file changed, 22 insertions(+), 48 deletions(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 40fd6afc08..e5276f6ab0 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -85,7 +85,6 @@ struct fsl_esdhc_priv { unsigned int sdhc_clk; struct clk per_clk; unsigned int clock; - unsigned int bus_width; #if !CONFIG_IS_ENABLED(DM_MMC) struct mmc *mmc; #endif @@ -714,28 +713,10 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, #if !CONFIG_IS_ENABLED(DM_MMC) cfg->ops = &esdhc_ops; #endif - if (priv->bus_width == 8) - cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; - else if (priv->bus_width == 4) - cfg->host_caps = MMC_MODE_4BIT; - - cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; - - if (priv->bus_width > 0) { - if (priv->bus_width < 8) - cfg->host_caps &= ~MMC_MODE_8BIT; - if (priv->bus_width < 4) - cfg->host_caps &= ~MMC_MODE_4BIT; - } if (caps & HOSTCAPBLT_HSS) cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; -#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK - if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK) - cfg->host_caps &= ~MMC_MODE_8BIT; -#endif - cfg->f_min = 400000; cfg->f_max = min(priv->sdhc_clk, (u32)200000000); @@ -745,24 +726,11 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, } #if !CONFIG_IS_ENABLED(DM_MMC) -static int fsl_esdhc_cfg_to_priv(struct fsl_esdhc_cfg *cfg, - struct fsl_esdhc_priv *priv) -{ - if (!cfg || !priv) - return -EINVAL; - - priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base); - priv->bus_width = cfg->max_bus_width; - priv->sdhc_clk = cfg->sdhc_clk; - priv->wp_enable = cfg->wp_enable; - - return 0; -}; - int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) { struct fsl_esdhc_plat *plat; struct fsl_esdhc_priv *priv; + struct mmc_config *mmc_cfg; struct mmc *mmc; int ret; @@ -778,14 +746,29 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) return -ENOMEM; } - ret = fsl_esdhc_cfg_to_priv(cfg, priv); - if (ret) { - debug("%s xlate failure\n", __func__); - free(plat); - free(priv); - return ret; + priv->esdhc_regs = (struct fsl_esdhc *)(unsigned long)(cfg->esdhc_base); + priv->sdhc_clk = cfg->sdhc_clk; + priv->wp_enable = cfg->wp_enable; + + mmc_cfg = &plat->cfg; + + if (cfg->max_bus_width == 8) { + mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT | + MMC_MODE_8BIT; + } else if (cfg->max_bus_width == 4) { + mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT; + } else if (cfg->max_bus_width == 1) { + mmc_cfg->host_caps |= MMC_MODE_1BIT; + } else { + mmc_cfg->host_caps |= MMC_MODE_1BIT | MMC_MODE_4BIT | + MMC_MODE_8BIT; + printf("No max bus width provided. Assume 8-bit supported.\n"); } +#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK + if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK) + mmc_cfg->host_caps &= ~MMC_MODE_8BIT; +#endif ret = fsl_esdhc_init(priv, plat); if (ret) { debug("%s init failure\n", __func__); @@ -897,7 +880,6 @@ static int fsl_esdhc_probe(struct udevice *dev) struct fsl_esdhc_plat *plat = dev_get_platdata(dev); struct fsl_esdhc_priv *priv = dev_get_priv(dev); fdt_addr_t addr; - unsigned int val; struct mmc *mmc; int ret; @@ -911,14 +893,6 @@ static int fsl_esdhc_probe(struct udevice *dev) #endif priv->dev = dev; - val = dev_read_u32_default(dev, "bus-width", -1); - if (val == 8) - priv->bus_width = 8; - else if (val == 4) - priv->bus_width = 4; - else - priv->bus_width = 1; - if (dev_read_bool(dev, "non-removable")) { priv->non_removable = 1; } else { -- 2.25.1