From 060ae29eafbca089824cfbcedc9bc36b7fda5d5e Mon Sep 17 00:00:00 2001 From: Kahrl Date: Sun, 4 Jan 2015 05:10:07 +0100 Subject: [PATCH] Update bundled SQLite to 3.8.7.4 --- src/sqlite/sqlite3.c | 212880 ++++++++++++++++++++++------------------ src/sqlite/sqlite3.h | 1440 +- 2 files changed, 119211 insertions(+), 95109 deletions(-) diff --git a/src/sqlite/sqlite3.c b/src/sqlite/sqlite3.c index 2c426c21e..81e9c733c 100644 --- a/src/sqlite/sqlite3.c +++ b/src/sqlite/sqlite3.c @@ -1,6 +1,6 @@ /****************************************************************************** ** This file is an amalgamation of many separate C source files from SQLite -** version 3.7.7.1. By combining all the individual C code files into this +** version 3.8.7.4. By combining all the individual C code files into this ** single large file, the entire code can be compiled as a single translation ** unit. This allows many compilers to do optimizations that would not be ** possible if the files were compiled separately. Performance improvements @@ -60,6 +60,11 @@ ** in Red Hat 6.0, so the code won't work. Hence, for maximum binary ** portability you should omit LFS. ** +** The previous paragraph was written in 2005. (This paragraph is written +** on 2008-11-28.) These days, all Linux kernels support large files, so +** you should probably leave LFS enabled. But some embedded platforms might +** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful. +** ** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later. */ #ifndef SQLITE_DISABLE_LFS @@ -70,475 +75,51 @@ # define _LARGEFILE_SOURCE 1 #endif -/* -** Include the configuration header output by 'configure' if we're using the -** autoconf-based build -*/ -#ifdef _HAVE_SQLITE_CONFIG_H -#include "config.h" -#endif - -/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ -/************** Begin file sqliteLimit.h *************************************/ -/* -** 2007 May 7 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file defines various limits of what SQLite can process. -*/ - -/* -** The maximum length of a TEXT or BLOB in bytes. This also -** limits the size of a row in a table or index. -** -** The hard limit is the ability of a 32-bit signed integer -** to count the size: 2^31-1 or 2147483647. -*/ -#ifndef SQLITE_MAX_LENGTH -# define SQLITE_MAX_LENGTH 1000000000 -#endif - -/* -** This is the maximum number of -** -** * Columns in a table -** * Columns in an index -** * Columns in a view -** * Terms in the SET clause of an UPDATE statement -** * Terms in the result set of a SELECT statement -** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement. -** * Terms in the VALUES clause of an INSERT statement -** -** The hard upper limit here is 32676. Most database people will -** tell you that in a well-normalized database, you usually should -** not have more than a dozen or so columns in any table. And if -** that is the case, there is no point in having more than a few -** dozen values in any of the other situations described above. -*/ -#ifndef SQLITE_MAX_COLUMN -# define SQLITE_MAX_COLUMN 2000 -#endif - -/* -** The maximum length of a single SQL statement in bytes. -** -** It used to be the case that setting this value to zero would -** turn the limit off. That is no longer true. It is not possible -** to turn this limit off. -*/ -#ifndef SQLITE_MAX_SQL_LENGTH -# define SQLITE_MAX_SQL_LENGTH 1000000000 -#endif - -/* -** The maximum depth of an expression tree. This is limited to -** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might -** want to place more severe limits on the complexity of an -** expression. -** -** A value of 0 used to mean that the limit was not enforced. -** But that is no longer true. The limit is now strictly enforced -** at all times. -*/ -#ifndef SQLITE_MAX_EXPR_DEPTH -# define SQLITE_MAX_EXPR_DEPTH 1000 -#endif - -/* -** The maximum number of terms in a compound SELECT statement. -** The code generator for compound SELECT statements does one -** level of recursion for each term. A stack overflow can result -** if the number of terms is too large. In practice, most SQL -** never has more than 3 or 4 terms. Use a value of 0 to disable -** any limit on the number of terms in a compount SELECT. -*/ -#ifndef SQLITE_MAX_COMPOUND_SELECT -# define SQLITE_MAX_COMPOUND_SELECT 500 -#endif - -/* -** The maximum number of opcodes in a VDBE program. -** Not currently enforced. -*/ -#ifndef SQLITE_MAX_VDBE_OP -# define SQLITE_MAX_VDBE_OP 25000 -#endif - -/* -** The maximum number of arguments to an SQL function. -*/ -#ifndef SQLITE_MAX_FUNCTION_ARG -# define SQLITE_MAX_FUNCTION_ARG 127 -#endif - -/* -** The maximum number of in-memory pages to use for the main database -** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE -*/ -#ifndef SQLITE_DEFAULT_CACHE_SIZE -# define SQLITE_DEFAULT_CACHE_SIZE 2000 -#endif -#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE -# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500 -#endif - -/* -** The default number of frames to accumulate in the log file before -** checkpointing the database in WAL mode. -*/ -#ifndef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT -# define SQLITE_DEFAULT_WAL_AUTOCHECKPOINT 1000 -#endif - -/* -** The maximum number of attached databases. This must be between 0 -** and 62. The upper bound on 62 is because a 64-bit integer bitmap -** is used internally to track attached databases. -*/ -#ifndef SQLITE_MAX_ATTACHED -# define SQLITE_MAX_ATTACHED 10 -#endif - - -/* -** The maximum value of a ?nnn wildcard that the parser will accept. -*/ -#ifndef SQLITE_MAX_VARIABLE_NUMBER -# define SQLITE_MAX_VARIABLE_NUMBER 999 -#endif - -/* Maximum page size. The upper bound on this value is 65536. This a limit -** imposed by the use of 16-bit offsets within each page. -** -** Earlier versions of SQLite allowed the user to change this value at -** compile time. This is no longer permitted, on the grounds that it creates -** a library that is technically incompatible with an SQLite library -** compiled with a different limit. If a process operating on a database -** with a page-size of 65536 bytes crashes, then an instance of SQLite -** compiled with the default page-size limit will not be able to rollback -** the aborted transaction. This could lead to database corruption. -*/ -#ifdef SQLITE_MAX_PAGE_SIZE -# undef SQLITE_MAX_PAGE_SIZE -#endif -#define SQLITE_MAX_PAGE_SIZE 65536 - - -/* -** The default size of a database page. -*/ -#ifndef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE 1024 -#endif -#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - -/* -** Ordinarily, if no value is explicitly provided, SQLite creates databases -** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain -** device characteristics (sector-size and atomic write() support), -** SQLite may choose a larger value. This constant is the maximum value -** SQLite will choose on its own. -*/ -#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192 -#endif -#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - - -/* -** Maximum number of pages in one database file. -** -** This is really just the default value for the max_page_count pragma. -** This value can be lowered (or raised) at run-time using that the -** max_page_count macro. -*/ -#ifndef SQLITE_MAX_PAGE_COUNT -# define SQLITE_MAX_PAGE_COUNT 1073741823 -#endif - -/* -** Maximum length (in bytes) of the pattern in a LIKE or GLOB -** operator. -*/ -#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH -# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000 -#endif - -/* -** Maximum depth of recursion for triggers. -** -** A value of 1 means that a trigger program will not be able to itself -** fire any triggers. A value of 0 means that no trigger programs at all -** may be executed. -*/ -#ifndef SQLITE_MAX_TRIGGER_DEPTH -# define SQLITE_MAX_TRIGGER_DEPTH 1000 -#endif - -/************** End of sqliteLimit.h *****************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - -/* Disable nuisance warnings on Borland compilers */ -#if defined(__BORLANDC__) -#pragma warn -rch /* unreachable code */ -#pragma warn -ccc /* Condition is always true or false */ -#pragma warn -aus /* Assigned value is never used */ -#pragma warn -csu /* Comparing signed and unsigned */ -#pragma warn -spa /* Suspicious pointer arithmetic */ -#endif - /* Needed for various definitions... */ -#ifndef _GNU_SOURCE +#if defined(__GNUC__) && !defined(_GNU_SOURCE) # define _GNU_SOURCE #endif -/* -** Include standard header files as necessary -*/ -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_INTTYPES_H -#include -#endif - -/* -** The number of samples of an index that SQLite takes in order to -** construct a histogram of the table content when running ANALYZE -** and with SQLITE_ENABLE_STAT2 -*/ -#define SQLITE_INDEX_SAMPLES 10 - -/* -** The following macros are used to cast pointers to integers and -** integers to pointers. The way you do this varies from one compiler -** to the next, so we have developed the following set of #if statements -** to generate appropriate macros for a wide range of compilers. -** -** The correct "ANSI" way to do this is to use the intptr_t type. -** Unfortunately, that typedef is not available on all compilers, or -** if it is available, it requires an #include of specific headers -** that vary from one machine to the next. -** -** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on -** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). -** So we have to define the macros in different ways depending on the -** compiler. -*/ -#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ -# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) -#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ -# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) -# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) -#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ -# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) -#else /* Generates a warning - but it always works */ -# define SQLITE_INT_TO_PTR(X) ((void*)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(X)) -#endif - -/* -** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. -** 0 means mutexes are permanently disable and the library is never -** threadsafe. 1 means the library is serialized which is the highest -** level of threadsafety. 2 means the libary is multithreaded - multiple -** threads can use SQLite as long as no two threads try to use the same -** database connection at the same time. -** -** Older versions of SQLite used an optional THREADSAFE macro. -** We support that for legacy. -*/ -#if !defined(SQLITE_THREADSAFE) -#if defined(THREADSAFE) -# define SQLITE_THREADSAFE THREADSAFE -#else -# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ -#endif -#endif - -/* -** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. -** It determines whether or not the features related to -** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can -** be overridden at runtime using the sqlite3_config() API. -*/ -#if !defined(SQLITE_DEFAULT_MEMSTATUS) -# define SQLITE_DEFAULT_MEMSTATUS 1 -#endif - -/* -** Exactly one of the following macros must be defined in order to -** specify which memory allocation subsystem to use. -** -** SQLITE_SYSTEM_MALLOC // Use normal system malloc() -** SQLITE_MEMDEBUG // Debugging version of system malloc() -** -** (Historical note: There used to be several other options, but we've -** pared it down to just these two.) -** -** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as -** the default. -*/ -#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)>1 -# error "At most one of the following compile-time configuration options\ - is allows: SQLITE_SYSTEM_MALLOC, SQLITE_MEMDEBUG" -#endif -#if defined(SQLITE_SYSTEM_MALLOC)+defined(SQLITE_MEMDEBUG)==0 -# define SQLITE_SYSTEM_MALLOC 1 -#endif - -/* -** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the -** sizes of memory allocations below this value where possible. -*/ -#if !defined(SQLITE_MALLOC_SOFT_LIMIT) -# define SQLITE_MALLOC_SOFT_LIMIT 1024 -#endif - -/* -** We need to define _XOPEN_SOURCE as follows in order to enable -** recursive mutexes on most Unix systems. But Mac OS X is different. -** The _XOPEN_SOURCE define causes problems for Mac OS X we are told, -** so it is omitted there. See ticket #2673. -** -** Later we learn that _XOPEN_SOURCE is poorly or incorrectly -** implemented on some systems. So we avoid defining it at all -** if it is already defined or if it is unneeded because we are -** not doing a threadsafe build. Ticket #2681. -** -** See also ticket #2741. -*/ -#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) && SQLITE_THREADSAFE -# define _XOPEN_SOURCE 500 /* Needed to enable pthread recursive mutexes */ -#endif - -/* -** The TCL headers are only needed when compiling the TCL bindings. -*/ -#if defined(SQLITE_TCL) || defined(TCLSH) -# include -#endif - -/* -** Many people are failing to set -DNDEBUG=1 when compiling SQLite. -** Setting NDEBUG makes the code smaller and run faster. So the following -** lines are added to automatically set NDEBUG unless the -DSQLITE_DEBUG=1 -** option is set. Thus NDEBUG becomes an opt-in rather than an opt-out -** feature. -*/ -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif - -/* -** The testcase() macro is used to aid in coverage testing. When -** doing coverage testing, the condition inside the argument to -** testcase() must be evaluated both true and false in order to -** get full branch coverage. The testcase() macro is inserted -** to help ensure adequate test coverage in places where simple -** condition/decision coverage is inadequate. For example, testcase() -** can be used to make sure boundary values are tested. For -** bitmask tests, testcase() can be used to make sure each bit -** is significant and used at least once. On switch statements -** where multiple cases go to the same block of code, testcase() -** can insure that all cases are evaluated. -** -*/ -#ifdef SQLITE_COVERAGE_TEST -SQLITE_PRIVATE void sqlite3Coverage(int); -# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } -#else -# define testcase(X) -#endif - -/* -** The TESTONLY macro is used to enclose variable declarations or -** other bits of code that are needed to support the arguments -** within testcase() and assert() macros. -*/ -#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) -# define TESTONLY(X) X -#else -# define TESTONLY(X) +#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) +# define _BSD_SOURCE #endif /* -** Sometimes we need a small amount of code such as a variable initialization -** to setup for a later assert() statement. We do not want this code to -** appear when assert() is disabled. The following macro is therefore -** used to contain that setup code. The "VVA" acronym stands for -** "Verification, Validation, and Accreditation". In other words, the -** code within VVA_ONLY() will only run during verification processes. +** For MinGW, check to see if we can include the header file containing its +** version information, among other things. Normally, this internal MinGW +** header file would [only] be included automatically by other MinGW header +** files; however, the contained version information is now required by this +** header file to work around binary compatibility issues (see below) and +** this is the only known way to reliably obtain it. This entire #if block +** would be completely unnecessary if there was any other way of detecting +** MinGW via their preprocessor (e.g. if they customized their GCC to define +** some MinGW-specific macros). When compiling for MinGW, either the +** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be +** defined; otherwise, detection of conditions specific to MinGW will be +** disabled. */ -#ifndef NDEBUG -# define VVA_ONLY(X) X -#else -# define VVA_ONLY(X) +#if defined(_HAVE_MINGW_H) +# include "mingw.h" +#elif defined(_HAVE__MINGW_H) +# include "_mingw.h" #endif /* -** The ALWAYS and NEVER macros surround boolean expressions which -** are intended to always be true or false, respectively. Such -** expressions could be omitted from the code completely. But they -** are included in a few cases in order to enhance the resilience -** of SQLite to unexpected behavior - to make the code "self-healing" -** or "ductile" rather than being "brittle" and crashing at the first -** hint of unplanned behavior. -** -** In other words, ALWAYS and NEVER are added for defensive code. -** -** When doing coverage testing ALWAYS and NEVER are hard-coded to -** be true and false so that the unreachable code then specify will -** not be counted as untested code. +** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T +** define is required to maintain binary compatibility with the MSVC runtime +** library in use (e.g. for Windows XP). */ -#if defined(SQLITE_COVERAGE_TEST) -# define ALWAYS(X) (1) -# define NEVER(X) (0) -#elif !defined(NDEBUG) -# define ALWAYS(X) ((X)?1:(assert(0),0)) -# define NEVER(X) ((X)?(assert(0),1):0) -#else -# define ALWAYS(X) (X) -# define NEVER(X) (X) +#if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \ + defined(_WIN32) && !defined(_WIN64) && \ + defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \ + defined(__MSVCRT__) +# define _USE_32BIT_TIME_T #endif -/* -** Return true (non-zero) if the input is a integer that is too large -** to fit in 32-bits. This macro is used inside of various testcase() -** macros to verify that we have tested SQLite for large-file support. -*/ -#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) - -/* -** The macro unlikely() is a hint that surrounds a boolean -** expression that is usually false. Macro likely() surrounds -** a boolean expression that is usually true. GCC is able to -** use these hints to generate better code, sometimes. +/* The public SQLite interface. The _FILE_OFFSET_BITS macro must appear +** first in QNX. Also, the _USE_32BIT_TIME_T macro must appear first for +** MinGW. */ -#if defined(__GNUC__) && 0 -# define likely(X) __builtin_expect((X),1) -# define unlikely(X) __builtin_expect((X),0) -#else -# define likely(X) !!(X) -# define unlikely(X) !!(X) -#endif - /************** Include sqlite3.h in the middle of sqliteInt.h ***************/ /************** Begin file sqlite3.h *****************************************/ /* @@ -650,9 +231,9 @@ extern "C" { ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.7.7.1" -#define SQLITE_VERSION_NUMBER 3007007 -#define SQLITE_SOURCE_ID "2011-06-28 17:39:05 af0d91adf497f5f36ec3813f04235a6e195a605f" +#define SQLITE_VERSION "3.8.7.4" +#define SQLITE_VERSION_NUMBER 3008007 +#define SQLITE_SOURCE_ID "2014-12-09 01:34:36 f66f7a17b78ba617acde90fc810107f34f1a1f2e" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -720,7 +301,7 @@ SQLITE_API const char *sqlite3_compileoption_get(int N); ** CAPI3REF: Test To See If The Library Is Threadsafe ** ** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled mutexing code omitted due to the +** SQLite was compiled with mutexing code omitted due to the ** [SQLITE_THREADSAFE] compile-time option being set to 0. ** ** SQLite can be compiled with or without mutexes. When @@ -762,7 +343,8 @@ SQLITE_API int sqlite3_threadsafe(void); ** the opaque structure named "sqlite3". It is useful to think of an sqlite3 ** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and ** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** is its destructor. There are many other interfaces (such as +** and [sqlite3_close_v2()] are its destructors. There are many other +** interfaces (such as ** [sqlite3_prepare_v2()], [sqlite3_create_function()], and ** [sqlite3_busy_timeout()] to name but three) that are methods on an ** sqlite3 object. @@ -809,28 +391,46 @@ typedef sqlite_uint64 sqlite3_uint64; /* ** CAPI3REF: Closing A Database Connection ** -** ^The sqlite3_close() routine is the destructor for the [sqlite3] object. -** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is -** successfully destroyed and all associated resources are deallocated. -** -** Applications must [sqlite3_finalize | finalize] all [prepared statements] -** and [sqlite3_blob_close | close] all [BLOB handles] associated with -** the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close() is called on a [database connection] that still has -** outstanding [prepared statements] or [BLOB handles], then it returns -** SQLITE_BUSY. -** -** ^If [sqlite3_close()] is invoked while a transaction is open, +** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors +** for the [sqlite3] object. +** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if +** the [sqlite3] object is successfully destroyed and all associated +** resources are deallocated. +** +** ^If the database connection is associated with unfinalized prepared +** statements or unfinished sqlite3_backup objects then sqlite3_close() +** will leave the database connection open and return [SQLITE_BUSY]. +** ^If sqlite3_close_v2() is called with unfinalized prepared statements +** and/or unfinished sqlite3_backups, then the database connection becomes +** an unusable "zombie" which will automatically be deallocated when the +** last prepared statement is finalized or the last sqlite3_backup is +** finished. The sqlite3_close_v2() interface is intended for use with +** host languages that are garbage collected, and where the order in which +** destructors are called is arbitrary. +** +** Applications should [sqlite3_finalize | finalize] all [prepared statements], +** [sqlite3_blob_close | close] all [BLOB handles], and +** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated +** with the [sqlite3] object prior to attempting to close the object. ^If +** sqlite3_close_v2() is called on a [database connection] that still has +** outstanding [prepared statements], [BLOB handles], and/or +** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation +** of resources is deferred until all [prepared statements], [BLOB handles], +** and [sqlite3_backup] objects are also destroyed. +** +** ^If an [sqlite3] object is destroyed while a transaction is open, ** the transaction is automatically rolled back. ** -** The C parameter to [sqlite3_close(C)] must be either a NULL +** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)] +** must be either a NULL ** pointer or an [sqlite3] object pointer obtained ** from [sqlite3_open()], [sqlite3_open16()], or ** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() with a NULL pointer argument is a -** harmless no-op. +** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer +** argument is a harmless no-op. */ -SQLITE_API int sqlite3_close(sqlite3 *); +SQLITE_API int sqlite3_close(sqlite3*); +SQLITE_API int sqlite3_close_v2(sqlite3*); /* ** The type for a callback function. @@ -894,7 +494,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**); **
    **
  • The application must insure that the 1st parameter to sqlite3_exec() ** is a valid and open [database connection]. -**
  • The application must not close [database connection] specified by +**
  • The application must not close the [database connection] specified by ** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running. **
  • The application must not modify the SQL statement text passed into ** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running. @@ -910,16 +510,14 @@ SQLITE_API int sqlite3_exec( /* ** CAPI3REF: Result Codes -** KEYWORDS: SQLITE_OK {error code} {error codes} -** KEYWORDS: {result code} {result codes} +** KEYWORDS: {result code definitions} ** ** Many SQLite functions return an integer result code from the set shown -** here in order to indicates success or failure. +** here in order to indicate success or failure. ** ** New error codes may be added in future versions of SQLite. ** -** See also: [SQLITE_IOERR_READ | extended result codes], -** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes]. +** See also: [extended result code definitions] */ #define SQLITE_OK 0 /* Successful result */ /* beginning-of-error-codes */ @@ -949,32 +547,27 @@ SQLITE_API int sqlite3_exec( #define SQLITE_FORMAT 24 /* Auxiliary database format error */ #define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ #define SQLITE_NOTADB 26 /* File opened that is not a database file */ +#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */ +#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */ #define SQLITE_ROW 100 /* sqlite3_step() has another row ready */ #define SQLITE_DONE 101 /* sqlite3_step() has finished executing */ /* end-of-error-codes */ /* ** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended error code} {extended error codes} -** KEYWORDS: {extended result code} {extended result codes} +** KEYWORDS: {extended result code definitions} ** -** In its default configuration, SQLite API routines return one of 26 integer -** [SQLITE_OK | result codes]. However, experience has shown that many of +** In its default configuration, SQLite API routines return one of 30 integer +** [result codes]. However, experience has shown that many of ** these result codes are too coarse-grained. They do not provide as ** much information about problems as programmers might like. In an effort to ** address this, newer versions of SQLite (version 3.3.8 and later) include ** support for additional result codes that provide more detailed information -** about errors. The extended result codes are enabled or disabled +** about errors. These [extended result codes] are enabled or disabled ** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. -** -** Some of the available extended result codes are listed here. -** One may expect the number of extended result codes will be expand -** over time. Software that uses extended result codes should expect -** to see new result codes in future releases of SQLite. -** -** The SQLITE_OK result code will never be extended. It will always -** be exactly zero. +** [sqlite3_extended_result_codes()] API. Or, the extended code for +** the most recent error can be obtained using +** [sqlite3_extended_errcode()]. */ #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) @@ -998,12 +591,37 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8)) #define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8)) #define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8)) +#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8)) +#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8)) +#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8)) +#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) #define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) #define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) +#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) #define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) +#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8)) +#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) +#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) #define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) #define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) #define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) +#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) +#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) +#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) +#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) +#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) +#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8)) +#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8)) +#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8)) +#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8)) +#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8)) +#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8)) +#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8)) +#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8)) +#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8)) +#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8)) +#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8)) +#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8)) /* ** CAPI3REF: Flags For File Open Operations @@ -1019,6 +637,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */ #define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */ #define SQLITE_OPEN_URI 0x00000040 /* Ok for sqlite3_open_v2() */ +#define SQLITE_OPEN_MEMORY 0x00000080 /* Ok for sqlite3_open_v2() */ #define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */ #define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */ #define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */ @@ -1038,7 +657,7 @@ SQLITE_API int sqlite3_exec( ** CAPI3REF: Device Characteristics ** ** The xDeviceCharacteristics method of the [sqlite3_io_methods] -** object returns an integer which is a vector of the these +** object returns an integer which is a vector of these ** bit values expressing I/O characteristics of the mass storage ** device that holds the file that the [sqlite3_io_methods] ** refers to. @@ -1052,7 +671,15 @@ SQLITE_API int sqlite3_exec( ** first then the size of the file is extended, never the other ** way around. The SQLITE_IOCAP_SEQUENTIAL property means that ** information is written to disk in the same order as calls -** to xWrite(). +** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that +** after reboot following a crash or power loss, the only bytes in a +** file that were written at the application level might have changed +** and that adjacent bytes, even bytes within the same sector are +** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN +** flag indicate that a file cannot be deleted when open. The +** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on +** read-only media and cannot be changed even by processes with +** elevated privileges. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -1066,6 +693,8 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOCAP_SAFE_APPEND 0x00000200 #define SQLITE_IOCAP_SEQUENTIAL 0x00000400 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 +#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 +#define SQLITE_IOCAP_IMMUTABLE 0x00002000 /* ** CAPI3REF: File Locking Levels @@ -1172,7 +801,7 @@ struct sqlite3_file { ** locking strategy (for example to use dot-file locks), to inquire ** about the status of a lock, or to break stale locks. The SQLite ** core reserves all opcodes less than 100 for its own use. -** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available. +** A [file control opcodes | list of opcodes] less than 100 is available. ** Applications that define a custom xFileControl method should use opcodes ** greater than 100 to avoid conflicts. VFS implementations should ** return [SQLITE_NOTFOUND] for file control opcodes that they do not @@ -1237,11 +866,15 @@ struct sqlite3_io_methods { void (*xShmBarrier)(sqlite3_file*); int (*xShmUnmap)(sqlite3_file*, int deleteFlag); /* Methods above are valid for version 2 */ + int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); + int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p); + /* Methods above are valid for version 3 */ /* Additional methods may be added in future releases */ }; /* ** CAPI3REF: Standard File Control Opcodes +** KEYWORDS: {file control opcodes} {file control opcode} ** ** These integer constants are opcodes for the xFileControl method ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] @@ -1254,7 +887,8 @@ struct sqlite3_io_methods { ** into an integer that the pArg argument points to. This capability ** is used during testing and only needs to be supported when SQLITE_TEST ** is defined. -** +**
      +**
    • [[SQLITE_FCNTL_SIZE_HINT]] ** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS ** layer a hint of how large the database file will grow to be during the ** current transaction. This hint is not guaranteed to be accurate but it @@ -1262,6 +896,7 @@ struct sqlite3_io_methods { ** file space based on this hint in order to help writes to the database ** file run faster. ** +**
    • [[SQLITE_FCNTL_CHUNK_SIZE]] ** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS ** extends and truncates the database file in chunks of a size specified ** by the user. The fourth argument to [sqlite3_file_control()] should @@ -1270,30 +905,195 @@ struct sqlite3_io_methods { ** chunks (say 1MB at a time), may reduce file-system fragmentation and ** improve performance on some systems. ** +**
    • [[SQLITE_FCNTL_FILE_POINTER]] ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer ** to the [sqlite3_file] object associated with a particular database ** connection. See the [sqlite3_file_control()] documentation for ** additional information. ** -** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by -** SQLite and sent to all VFSes in place of a call to the xSync method -** when the database connection has [PRAGMA synchronous] set to OFF.)^ -** Some specialized VFSes need this signal in order to operate correctly -** when [PRAGMA synchronous | PRAGMA synchronous=OFF] is set, but most -** VFSes do not need this signal and should silently ignore this opcode. -** Applications should not call [sqlite3_file_control()] with this -** opcode as doing so may disrupt the operation of the specialized VFSes -** that do require it. +**
    • [[SQLITE_FCNTL_SYNC_OMITTED]] +** No longer in use. +** +**
    • [[SQLITE_FCNTL_SYNC]] +** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and +** sent to the VFS immediately before the xSync method is invoked on a +** database file descriptor. Or, if the xSync method is not invoked +** because the user has configured SQLite with +** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place +** of the xSync method. In most cases, the pointer argument passed with +** this file-control is NULL. However, if the database file is being synced +** as part of a multi-database commit, the argument points to a nul-terminated +** string containing the transactions master-journal file name. VFSes that +** do not need this signal should silently ignore this opcode. Applications +** should not call [sqlite3_file_control()] with this opcode as doing so may +** disrupt the operation of the specialized VFSes that do require it. +** +**
    • [[SQLITE_FCNTL_COMMIT_PHASETWO]] +** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite +** and sent to the VFS after a transaction has been committed immediately +** but before the database is unlocked. VFSes that do not need this signal +** should silently ignore this opcode. Applications should not call +** [sqlite3_file_control()] with this opcode as doing so may disrupt the +** operation of the specialized VFSes that do require it. +** +**
    • [[SQLITE_FCNTL_WIN32_AV_RETRY]] +** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic +** retry counts and intervals for certain disk I/O operations for the +** windows [VFS] in order to provide robustness in the presence of +** anti-virus programs. By default, the windows VFS will retry file read, +** file write, and file delete operations up to 10 times, with a delay +** of 25 milliseconds before the first retry and with the delay increasing +** by an additional 25 milliseconds with each subsequent retry. This +** opcode allows these two values (10 retries and 25 milliseconds of delay) +** to be adjusted. The values are changed for all database connections +** within the same process. The argument is a pointer to an array of two +** integers where the first integer i the new retry count and the second +** integer is the delay. If either integer is negative, then the setting +** is not changed but instead the prior value of that setting is written +** into the array entry, allowing the current retry settings to be +** interrogated. The zDbName parameter is ignored. +** +**
    • [[SQLITE_FCNTL_PERSIST_WAL]] +** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the +** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary +** write ahead log and shared memory files used for transaction control +** are automatically deleted when the latest connection to the database +** closes. Setting persistent WAL mode causes those files to persist after +** close. Persisting the files is useful when other processes that do not +** have write permission on the directory containing the database file want +** to read the database file, as the WAL and shared memory files must exist +** in order for the database to be readable. The fourth parameter to +** [sqlite3_file_control()] for this opcode should be a pointer to an integer. +** That integer is 0 to disable persistent WAL mode or 1 to enable persistent +** WAL mode. If the integer is -1, then it is overwritten with the current +** WAL persistence setting. +** +**
    • [[SQLITE_FCNTL_POWERSAFE_OVERWRITE]] +** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the +** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting +** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the +** xDeviceCharacteristics methods. The fourth parameter to +** [sqlite3_file_control()] for this opcode should be a pointer to an integer. +** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage +** mode. If the integer is -1, then it is overwritten with the current +** zero-damage mode setting. +** +**
    • [[SQLITE_FCNTL_OVERWRITE]] +** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening +** a write transaction to indicate that, unless it is rolled back for some +** reason, the entire database file will be overwritten by the current +** transaction. This is used by VACUUM operations. +** +**
    • [[SQLITE_FCNTL_VFSNAME]] +** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of +** all [VFSes] in the VFS stack. The names are of all VFS shims and the +** final bottom-level VFS are written into memory obtained from +** [sqlite3_malloc()] and the result is stored in the char* variable +** that the fourth parameter of [sqlite3_file_control()] points to. +** The caller is responsible for freeing the memory when done. As with +** all file-control actions, there is no guarantee that this will actually +** do anything. Callers should initialize the char* variable to a NULL +** pointer in case this file-control is not implemented. This file-control +** is intended for diagnostic use only. +** +**
    • [[SQLITE_FCNTL_PRAGMA]] +** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] +** file control is sent to the open [sqlite3_file] object corresponding +** to the database file to which the pragma statement refers. ^The argument +** to the [SQLITE_FCNTL_PRAGMA] file control is an array of +** pointers to strings (char**) in which the second element of the array +** is the name of the pragma and the third element is the argument to the +** pragma or NULL if the pragma has no argument. ^The handler for an +** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element +** of the char** argument point to a string obtained from [sqlite3_mprintf()] +** or the equivalent and that string will become the result of the pragma or +** the error message if the pragma fails. ^If the +** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal +** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA] +** file control returns [SQLITE_OK], then the parser assumes that the +** VFS has handled the PRAGMA itself and the parser generates a no-op +** prepared statement. ^If the [SQLITE_FCNTL_PRAGMA] file control returns +** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means +** that the VFS encountered an error while handling the [PRAGMA] and the +** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA] +** file control occurs at the beginning of pragma statement analysis and so +** it is able to override built-in [PRAGMA] statements. +** +**
    • [[SQLITE_FCNTL_BUSYHANDLER]] +** ^The [SQLITE_FCNTL_BUSYHANDLER] +** file-control may be invoked by SQLite on the database file handle +** shortly after it is opened in order to provide a custom VFS with access +** to the connections busy-handler callback. The argument is of type (void **) +** - an array of two (void *) values. The first (void *) actually points +** to a function of type (int (*)(void *)). In order to invoke the connections +** busy-handler, this function should be invoked with the second (void *) in +** the array as the only argument. If it returns non-zero, then the operation +** should be retried. If it returns zero, the custom VFS should abandon the +** current operation. +** +**
    • [[SQLITE_FCNTL_TEMPFILENAME]] +** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control +** to have SQLite generate a +** temporary filename using the same algorithm that is followed to generate +** temporary filenames for TEMP tables and other internal uses. The +** argument should be a char** which will be filled with the filename +** written into memory obtained from [sqlite3_malloc()]. The caller should +** invoke [sqlite3_free()] on the result to avoid a memory leak. +** +**
    • [[SQLITE_FCNTL_MMAP_SIZE]] +** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the +** maximum number of bytes that will be used for memory-mapped I/O. +** The argument is a pointer to a value of type sqlite3_int64 that +** is an advisory maximum number of bytes in the file to memory map. The +** pointer is overwritten with the old value. The limit is not changed if +** the value originally pointed to is negative, and so the current limit +** can be queried by passing in a pointer to a negative number. This +** file-control is used internally to implement [PRAGMA mmap_size]. +** +**
    • [[SQLITE_FCNTL_TRACE]] +** The [SQLITE_FCNTL_TRACE] file control provides advisory information +** to the VFS about what the higher layers of the SQLite stack are doing. +** This file control is used by some VFS activity tracing [shims]. +** The argument is a zero-terminated string. Higher layers in the +** SQLite stack may generate instances of this file control if +** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled. +** +**
    • [[SQLITE_FCNTL_HAS_MOVED]] +** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a +** pointer to an integer and it writes a boolean into that integer depending +** on whether or not the file has been renamed, moved, or deleted since it +** was first opened. +** +**
    • [[SQLITE_FCNTL_WIN32_SET_HANDLE]] +** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This +** opcode causes the xFileControl method to swap the file handle with the one +** pointed to by the pArg argument. This capability is used during testing +** and only needs to be supported when SQLITE_TEST is defined. +** +**
    */ -#define SQLITE_FCNTL_LOCKSTATE 1 -#define SQLITE_GET_LOCKPROXYFILE 2 -#define SQLITE_SET_LOCKPROXYFILE 3 -#define SQLITE_LAST_ERRNO 4 -#define SQLITE_FCNTL_SIZE_HINT 5 -#define SQLITE_FCNTL_CHUNK_SIZE 6 -#define SQLITE_FCNTL_FILE_POINTER 7 -#define SQLITE_FCNTL_SYNC_OMITTED 8 - +#define SQLITE_FCNTL_LOCKSTATE 1 +#define SQLITE_GET_LOCKPROXYFILE 2 +#define SQLITE_SET_LOCKPROXYFILE 3 +#define SQLITE_LAST_ERRNO 4 +#define SQLITE_FCNTL_SIZE_HINT 5 +#define SQLITE_FCNTL_CHUNK_SIZE 6 +#define SQLITE_FCNTL_FILE_POINTER 7 +#define SQLITE_FCNTL_SYNC_OMITTED 8 +#define SQLITE_FCNTL_WIN32_AV_RETRY 9 +#define SQLITE_FCNTL_PERSIST_WAL 10 +#define SQLITE_FCNTL_OVERWRITE 11 +#define SQLITE_FCNTL_VFSNAME 12 +#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13 +#define SQLITE_FCNTL_PRAGMA 14 +#define SQLITE_FCNTL_BUSYHANDLER 15 +#define SQLITE_FCNTL_TEMPFILENAME 16 +#define SQLITE_FCNTL_MMAP_SIZE 18 +#define SQLITE_FCNTL_TRACE 19 +#define SQLITE_FCNTL_HAS_MOVED 20 +#define SQLITE_FCNTL_SYNC 21 +#define SQLITE_FCNTL_COMMIT_PHASETWO 22 +#define SQLITE_FCNTL_WIN32_SET_HANDLE 23 /* ** CAPI3REF: Mutex Handle @@ -1348,7 +1148,7 @@ typedef struct sqlite3_mutex sqlite3_mutex; ** from xFullPathname() with an optional suffix added. ** ^If a suffix is added to the zFilename parameter, it will ** consist of a single "-" character followed by no more than -** 10 alphanumeric and/or "-" characters. +** 11 alphanumeric and/or "-" characters. ** ^SQLite further guarantees that ** the string will be valid and unchanged until xClose() is ** called. Because of the previous sentence, @@ -1721,16 +1521,10 @@ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); ** order to verify that SQLite recovers gracefully from such ** conditions. ** -** The xMalloc and xFree methods must work like the -** malloc() and free() functions from the standard C library. -** The xRealloc method must work like realloc() from the standard C library -** with the exception that if the second argument to xRealloc is zero, -** xRealloc must be a no-op - it must not perform any allocation or -** deallocation. ^SQLite guarantees that the second argument to +** The xMalloc, xRealloc, and xFree methods must work like the +** malloc(), realloc() and free() functions from the standard C library. +** ^SQLite guarantees that the second argument to ** xRealloc is always a value returned by a prior call to xRoundup. -** And so in cases where xRoundup always returns a positive number, -** xRealloc can perform exactly as the standard library realloc() and -** still be in compliance with this specification. ** ** xSize should return the allocated size of a memory allocation ** previously obtained from xMalloc or xRealloc. The allocated size @@ -1744,7 +1538,7 @@ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); ** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, ** that causes the corresponding memory allocation to fail. ** -** The xInit method initializes the memory allocator. (For example, +** The xInit method initializes the memory allocator. For example, ** it might allocate any require mutexes or initialize internal data ** structures. The xShutdown method is invoked (indirectly) by ** [sqlite3_shutdown()] and should deallocate any resources acquired @@ -1885,7 +1679,7 @@ struct sqlite3_mem_methods { **
    ^This option specifies a static memory buffer that SQLite can use for ** the database page cache with the default page cache implementation. ** This configuration should not be used if an application-define page -** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option. +** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option. ** There are three arguments to this option: A pointer to 8-byte aligned ** memory, the size of each page buffer (sz), and the number of pages (N). ** The sz argument should be the size of the largest database page @@ -1916,8 +1710,8 @@ struct sqlite3_mem_methods { ** allocator is engaged to handle all of SQLites memory allocation needs. ** The first pointer (the memory pointer) must be aligned to an 8-byte ** boundary or subsequent behavior of SQLite will be undefined. -** The minimum allocation size is capped at 2^12. Reasonable values -** for the minimum allocation size are 2^5 through 2^8.
    +** The minimum allocation size is capped at 2**12. Reasonable values +** for the minimum allocation size are 2**5 through 2**8. ** ** [[SQLITE_CONFIG_MUTEX]]
    SQLITE_CONFIG_MUTEX
    **
    ^(This option takes a single argument which is a pointer to an @@ -1954,19 +1748,21 @@ struct sqlite3_mem_methods { ** verb to [sqlite3_db_config()] can be used to change the lookaside ** configuration on individual connections.)^
    ** -** [[SQLITE_CONFIG_PCACHE]]
    SQLITE_CONFIG_PCACHE
    +** [[SQLITE_CONFIG_PCACHE2]]
    SQLITE_CONFIG_PCACHE2
    **
    ^(This option takes a single argument which is a pointer to -** an [sqlite3_pcache_methods] object. This object specifies the interface +** an [sqlite3_pcache_methods2] object. This object specifies the interface ** to a custom page cache implementation.)^ ^SQLite makes a copy of the ** object and uses it for page cache memory allocations.
    ** -** [[SQLITE_CONFIG_GETPCACHE]]
    SQLITE_CONFIG_GETPCACHE
    +** [[SQLITE_CONFIG_GETPCACHE2]]
    SQLITE_CONFIG_GETPCACHE2
    **
    ^(This option takes a single argument which is a pointer to an -** [sqlite3_pcache_methods] object. SQLite copies of the current +** [sqlite3_pcache_methods2] object. SQLite copies of the current ** page cache implementation into that object.)^
    ** ** [[SQLITE_CONFIG_LOG]]
    SQLITE_CONFIG_LOG
    -**
    ^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a +**
    The SQLITE_CONFIG_LOG option is used to configure the SQLite +** global [error log]. +** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a ** function with a call signature of void(*)(void*,int,const char*), ** and a pointer to void. ^If the function pointer is not NULL, it is ** invoked by [sqlite3_log()] to process each logging event. ^If the @@ -1984,17 +1780,73 @@ struct sqlite3_mem_methods { ** function must be threadsafe.
    ** ** [[SQLITE_CONFIG_URI]]
    SQLITE_CONFIG_URI -**
    This option takes a single argument of type int. If non-zero, then +**
    ^(This option takes a single argument of type int. If non-zero, then ** URI handling is globally enabled. If the parameter is zero, then URI handling -** is globally disabled. If URI handling is globally enabled, all filenames +** is globally disabled.)^ ^If URI handling is globally enabled, all filenames ** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or ** specified as part of [ATTACH] commands are interpreted as URIs, regardless ** of whether or not the [SQLITE_OPEN_URI] flag is set when the database -** connection is opened. If it is globally disabled, filenames are +** connection is opened. ^If it is globally disabled, filenames are ** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the -** database connection is opened. By default, URI handling is globally +** database connection is opened. ^(By default, URI handling is globally ** disabled. The default value may be changed by compiling with the -** [SQLITE_USE_URI] symbol defined. +** [SQLITE_USE_URI] symbol defined.)^ +** +** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]]
    SQLITE_CONFIG_COVERING_INDEX_SCAN +**
    ^This option takes a single integer argument which is interpreted as +** a boolean in order to enable or disable the use of covering indices for +** full table scans in the query optimizer. ^The default setting is determined +** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" +** if that compile-time option is omitted. +** The ability to disable the use of covering indices for full table scans +** is because some incorrectly coded legacy applications might malfunction +** when the optimization is enabled. Providing the ability to +** disable the optimization allows the older, buggy application code to work +** without change even with newer versions of SQLite. +** +** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]] +**
    SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE +**
    These options are obsolete and should not be used by new code. +** They are retained for backwards compatibility but are now no-ops. +**
    +** +** [[SQLITE_CONFIG_SQLLOG]] +**
    SQLITE_CONFIG_SQLLOG +**
    This option is only available if sqlite is compiled with the +** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should +** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int). +** The second should be of type (void*). The callback is invoked by the library +** in three separate circumstances, identified by the value passed as the +** fourth parameter. If the fourth parameter is 0, then the database connection +** passed as the second argument has just been opened. The third argument +** points to a buffer containing the name of the main database file. If the +** fourth parameter is 1, then the SQL statement that the third parameter +** points to has just been executed. Or, if the fourth parameter is 2, then +** the connection being passed as the second parameter is being closed. The +** third parameter is passed NULL In this case. An example of using this +** configuration option can be seen in the "test_sqllog.c" source file in +** the canonical SQLite source tree.
    +** +** [[SQLITE_CONFIG_MMAP_SIZE]] +**
    SQLITE_CONFIG_MMAP_SIZE +**
    ^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values +** that are the default mmap size limit (the default setting for +** [PRAGMA mmap_size]) and the maximum allowed mmap size limit. +** ^The default setting can be overridden by each database connection using +** either the [PRAGMA mmap_size] command, or by using the +** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size +** cannot be changed at run-time. Nor may the maximum allowed mmap size +** exceed the compile-time maximum mmap size set by the +** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ +** ^If either argument to this option is negative, then that argument is +** changed to its compile-time default. +** +** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] +**
    SQLITE_CONFIG_WIN32_HEAPSIZE +**
    ^This option is only available if SQLite is compiled for Windows +** with the [SQLITE_WIN32_MALLOC] pre-processor macro defined. +** SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value +** that specifies the maximum size of the created heap. ** */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -2010,10 +1862,16 @@ struct sqlite3_mem_methods { #define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */ /* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ #define SQLITE_CONFIG_LOOKASIDE 13 /* int int */ -#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */ +#define SQLITE_CONFIG_PCACHE 14 /* no-op */ +#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */ #define SQLITE_CONFIG_LOG 16 /* xFunc, void* */ #define SQLITE_CONFIG_URI 17 /* int */ +#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */ +#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */ +#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */ +#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */ +#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */ +#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -2090,19 +1948,21 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); /* ** CAPI3REF: Last Insert Rowid ** -** ^Each entry in an SQLite table has a unique 64-bit signed +** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables) +** has a unique 64-bit signed ** integer key called the [ROWID | "rowid"]. ^The rowid is always available ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those ** names are not also used by explicitly declared columns. ^If ** the table has a column of type [INTEGER PRIMARY KEY] then that column ** is another alias for the rowid. ** -** ^This routine returns the [rowid] of the most recent -** successful [INSERT] into the database from the [database connection] -** in the first argument. ^As of SQLite version 3.7.7, this routines -** records the last insert rowid of both ordinary tables and [virtual tables]. -** ^If no successful [INSERT]s -** have ever occurred on that database connection, zero is returned. +** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the +** most recent successful [INSERT] into a rowid table or [virtual table] +** on database connection D. +** ^Inserts into [WITHOUT ROWID] tables are not recorded. +** ^If no successful [INSERT]s into rowid tables +** have ever occurred on the database connection D, +** then sqlite3_last_insert_rowid(D) returns zero. ** ** ^(If an [INSERT] occurs within a trigger or within a [virtual table] ** method, then this routine will return the [rowid] of the inserted @@ -2294,27 +2154,33 @@ SQLITE_API int sqlite3_complete16(const void *sql); /* ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors ** -** ^This routine sets a callback function that might be invoked whenever -** an attempt is made to open a database table that another thread -** or process has locked. +** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X +** that might be invoked with argument P whenever +** an attempt is made to access a database table associated with +** [database connection] D when another thread +** or process has the table locked. +** The sqlite3_busy_handler() interface is used to implement +** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout]. ** -** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] +** ^If the busy callback is NULL, then [SQLITE_BUSY] ** is returned immediately upon encountering the lock. ^If the busy callback ** is not NULL, then the callback might be invoked with two arguments. ** ** ^The first argument to the busy handler is a copy of the void* pointer which ** is the third argument to sqlite3_busy_handler(). ^The second argument to ** the busy handler callback is the number of times that the busy handler has -** been invoked for this locking event. ^If the +** been invoked for the same locking event. ^If the ** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned. +** access the database and [SQLITE_BUSY] is returned +** to the application. ** ^If the callback returns non-zero, then another attempt -** is made to open the database for reading and the cycle repeats. +** is made to access the database and the cycle repeats. ** ** The presence of a busy handler does not guarantee that it will be invoked ** when there is lock contention. ^If SQLite determines that invoking the busy ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler. +** to the application instead of invoking the +** busy handler. ** Consider a scenario where one process is holding a read lock that ** it is trying to promote to a reserved lock and ** a second process is holding a reserved lock that it is trying @@ -2328,28 +2194,15 @@ SQLITE_API int sqlite3_complete16(const void *sql); ** ** ^The default busy callback is NULL. ** -** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED] -** when SQLite is in the middle of a large transaction where all the -** changes will not fit into the in-memory cache. SQLite will -** already hold a RESERVED lock on the database file, but it needs -** to promote this lock to EXCLUSIVE so that it can spill cache -** pages into the database file without harm to concurrent -** readers. ^If it is unable to promote the lock, then the in-memory -** cache will be left in an inconsistent state and so the error -** code is promoted from the relatively benign [SQLITE_BUSY] to -** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion -** forces an automatic rollback of the changes. See the -** -** CorruptionFollowingBusyError wiki page for a discussion of why -** this is important. -** ** ^(There can only be a single busy handler defined for each ** [database connection]. Setting a new busy handler clears any ** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** will also set or clear the busy handler. +** or evaluating [PRAGMA busy_timeout=N] will change the +** busy handler and thus clear any previously set busy handler. ** ** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. Any such actions +** database connection that invoked the busy handler. In other words, +** the busy handler is not reentrant. Any such actions ** result in undefined behavior. ** ** A busy handler must not close the database connection @@ -2365,15 +2218,17 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*); ** will sleep multiple times until at least "ms" milliseconds of sleeping ** have accumulated. ^After at least "ms" milliseconds of sleeping, ** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]. +** [SQLITE_BUSY]. ** ** ^Calling this routine with an argument less than or equal to zero ** turns off all busy handlers. ** ** ^(There can only be a single busy handler for a particular -** [database connection] any any given moment. If another busy handler +** [database connection] at any given moment. If another busy handler ** was defined (using [sqlite3_busy_handler()]) prior to calling ** this routine, that other busy handler is cleared.)^ +** +** See also: [PRAGMA busy_timeout] */ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); @@ -2498,7 +2353,7 @@ SQLITE_API void sqlite3_free_table(char **result); ** All of the usual printf() formatting options apply. In addition, there ** is are "%q", "%Q", and "%z" options. ** -** ^(The %q option works like %s in that it substitutes a null-terminated +** ^(The %q option works like %s in that it substitutes a nul-terminated ** string from the argument list. But %q also doubles every '\'' character. ** %q is designed for use inside a string literal.)^ By doubling each '\'' ** character it escapes that character and allows it to be inserted into @@ -2573,6 +2428,10 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns ** a NULL pointer. ** +** ^The sqlite3_malloc64(N) routine works just like +** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead +** of a signed 32-bit integer. +** ** ^Calling sqlite3_free() with a pointer previously returned ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so ** that it might be reused. ^The sqlite3_free() routine is @@ -2584,24 +2443,38 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** might result if sqlite3_free() is called with a non-NULL pointer that ** was not obtained from sqlite3_malloc() or sqlite3_realloc(). ** -** ^(The sqlite3_realloc() interface attempts to resize a -** prior memory allocation to be at least N bytes, where N is the -** second parameter. The memory allocation to be resized is the first -** parameter.)^ ^ If the first parameter to sqlite3_realloc() +** ^The sqlite3_realloc(X,N) interface attempts to resize a +** prior memory allocation X to be at least N bytes. +** ^If the X parameter to sqlite3_realloc(X,N) ** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc(). -** ^If the second parameter to sqlite3_realloc() is zero or +** sqlite3_malloc(N). +** ^If the N parameter to sqlite3_realloc(X,N) is zero or ** negative then the behavior is exactly the same as calling -** sqlite3_free(P) where P is the first parameter to sqlite3_realloc(). -** ^sqlite3_realloc() returns a pointer to a memory allocation -** of at least N bytes in size or NULL if sufficient memory is unavailable. +** sqlite3_free(X). +** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation +** of at least N bytes in size or NULL if insufficient memory is available. ** ^If M is the size of the prior allocation, then min(N,M) bytes ** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc() and the prior allocation is freed. -** ^If sqlite3_realloc() returns NULL, then the prior allocation -** is not freed. -** -** ^The memory returned by sqlite3_malloc() and sqlite3_realloc() +** by sqlite3_realloc(X,N) and the prior allocation is freed. +** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the +** prior allocation is not freed. +** +** ^The sqlite3_realloc64(X,N) interfaces works the same as +** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead +** of a 32-bit signed integer. +** +** ^If X is a memory allocation previously obtained from sqlite3_malloc(), +** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then +** sqlite3_msize(X) returns the size of that memory allocation in bytes. +** ^The value returned by sqlite3_msize(X) might be larger than the number +** of bytes requested when X was allocated. ^If X is a NULL pointer then +** sqlite3_msize(X) returns zero. If X points to something that is not +** the beginning of memory allocation, or if it points to a formerly +** valid memory allocation that has now been freed, then the behavior +** of sqlite3_msize(X) is undefined and possibly harmful. +** +** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(), +** sqlite3_malloc64(), and sqlite3_realloc64() ** is always aligned to at least an 8 byte boundary, or to a ** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time ** option is used. @@ -2611,12 +2484,12 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** implementation of these routines to be omitted. That capability ** is no longer provided. Only built-in memory allocators can be used. ** -** The Windows OS interface layer calls +** Prior to SQLite version 3.7.10, the Windows OS interface layer called ** the system malloc() and free() directly when converting ** filenames between the UTF-8 encoding used by SQLite ** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors are detected, but -** they are reported back as [SQLITE_CANTOPEN] or +** installation. Memory allocation errors were detected, but +** they were reported back as [SQLITE_CANTOPEN] or ** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. ** ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] @@ -2629,8 +2502,11 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** [sqlite3_free()] or [sqlite3_realloc()]. */ SQLITE_API void *sqlite3_malloc(int); +SQLITE_API void *sqlite3_malloc64(sqlite3_uint64); SQLITE_API void *sqlite3_realloc(void*, int); +SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64); SQLITE_API void sqlite3_free(void*); +SQLITE_API sqlite3_uint64 sqlite3_msize(void*); /* ** CAPI3REF: Memory Allocator Statistics @@ -2668,11 +2544,13 @@ SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); ** applications to access the same PRNG for other purposes. ** ** ^A call to this routine stores N bytes of randomness into buffer P. +** ^If N is less than one, then P can be a NULL pointer. ** -** ^The first time this routine is invoked (either internally or by -** the application) the PRNG is seeded using randomness obtained -** from the xRandomness method of the default [sqlite3_vfs] object. -** ^On all subsequent invocations, the pseudo-randomness is generated +** ^If this routine has not been previously called or if the previous +** call had N less than one, then the PRNG is seeded using randomness +** obtained from the xRandomness method of the default [sqlite3_vfs] object. +** ^If the previous call to this routine had an N of 1 or more then +** the pseudo-randomness is generated ** internally and without recourse to the [sqlite3_vfs] xRandomness ** method. */ @@ -2773,8 +2651,8 @@ SQLITE_API int sqlite3_set_authorizer( ** [sqlite3_set_authorizer | authorizer documentation] for additional ** information. ** -** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code] -** from the [sqlite3_vtab_on_conflict()] interface. +** Note that SQLITE_IGNORE is also used as a [conflict resolution mode] +** returned from the [sqlite3_vtab_on_conflict()] interface. */ #define SQLITE_DENY 1 /* Abort the SQL statement with an error */ #define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ @@ -2832,6 +2710,7 @@ SQLITE_API int sqlite3_set_authorizer( #define SQLITE_FUNCTION 31 /* NULL Function Name */ #define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ #define SQLITE_COPY 0 /* No longer used */ +#define SQLITE_RECURSIVE 33 /* NULL NULL */ /* ** CAPI3REF: Tracing And Profiling Functions @@ -2847,6 +2726,9 @@ SQLITE_API int sqlite3_set_authorizer( ** as each triggered subprogram is entered. The callbacks for triggers ** contain a UTF-8 SQL comment that identifies the trigger.)^ ** +** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit +** the length of [bound parameter] expansion in the output of sqlite3_trace(). +** ** ^The callback function registered by sqlite3_profile() is invoked ** as each SQL statement finishes. ^The profile callback contains ** the original statement text and an estimate of wall-clock time @@ -2872,9 +2754,10 @@ SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*, ** interface is to keep a GUI updated during a large query. ** ** ^The parameter P is passed through as the only parameter to the -** callback function X. ^The parameter N is the number of +** callback function X. ^The parameter N is the approximate number of ** [virtual machine instructions] that are evaluated between successive -** invocations of the callback X. +** invocations of the callback X. ^If N is less than one then the progress +** handler is disabled. ** ** ^Only a single progress handler may be defined at one time per ** [database connection]; setting a new progress handler cancels the @@ -2910,9 +2793,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** an English language description of the error following a failure of any ** of the sqlite3_open() routines. ** -** ^The default encoding for the database will be UTF-8 if -** sqlite3_open() or sqlite3_open_v2() is called and -** UTF-16 in the native byte order if sqlite3_open16() is used. +** ^The default encoding will be UTF-8 for databases created using +** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases +** created using sqlite3_open16() will be UTF-16 in the native byte order. ** ** Whether or not an error occurs when it is opened, resources ** associated with the [database connection] handle should be released by @@ -3000,13 +2883,14 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** then it is interpreted as an absolute path. ^If the path does not begin ** with a '/' (meaning that the authority section is omitted from the URI) ** then the path is interpreted as a relative path. -** ^On windows, the first component of an absolute path -** is a drive specification (e.g. "C:"). +** ^(On windows, the first component of an absolute path +** is a drive specification (e.g. "C:").)^ ** ** [[core URI query parameters]] ** The query component of a URI may contain parameters that are interpreted ** either by SQLite itself, or by a [VFS | custom VFS implementation]. -** SQLite interprets the following three query parameters: +** SQLite and its built-in [VFSes] interpret the +** following query parameters: ** **
      **
    • vfs: ^The "vfs" parameter may be used to specify the name of @@ -3017,18 +2901,20 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** present, then the VFS specified by the option takes precedence over ** the value passed as the fourth parameter to sqlite3_open_v2(). ** -**
    • mode: ^(The mode parameter may be set to either "ro", "rw" or -** "rwc". Attempting to set it to any other value is an error)^. +**
    • mode: ^(The mode parameter may be set to either "ro", "rw", +** "rwc", or "memory". Attempting to set it to any other value is +** an error)^. ** ^If "ro" is specified, then the database is opened for read-only ** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the -** third argument to sqlite3_prepare_v2(). ^If the mode option is set to +** third argument to sqlite3_open_v2(). ^If the mode option is set to ** "rw", then the database is opened for read-write (but not create) ** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had ** been set. ^Value "rwc" is equivalent to setting both -** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If sqlite3_open_v2() is -** used, it is an error to specify a value for the mode parameter that is -** less restrictive than that specified by the flags passed as the third -** parameter. +** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is +** set to "memory" then a pure [in-memory database] that never reads +** or writes from disk is used. ^It is an error to specify a value for +** the mode parameter that is less restrictive than that specified by +** the flags passed in the third parameter to sqlite3_open_v2(). ** **
    • cache: ^The cache parameter may be set to either "shared" or ** "private". ^Setting it to "shared" is equivalent to setting the @@ -3036,8 +2922,30 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** sqlite3_open_v2(). ^Setting the cache parameter to "private" is ** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit. ** ^If sqlite3_open_v2() is used and the "cache" parameter is present in -** a URI filename, its value overrides any behaviour requested by setting +** a URI filename, its value overrides any behavior requested by setting ** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag. +** +**
    • psow: ^The psow parameter indicates whether or not the +** [powersafe overwrite] property does or does not apply to the +** storage media on which the database file resides. +** +**
    • nolock: ^The nolock parameter is a boolean query parameter +** which if set disables file locking in rollback journal modes. This +** is useful for accessing a database on a filesystem that does not +** support locking. Caution: Database corruption might result if two +** or more processes write to the same database and any one of those +** processes uses nolock=1. +** +**
    • immutable: ^The immutable parameter is a boolean query +** parameter that indicates that the database file is stored on +** read-only media. ^When immutable is set, SQLite assumes that the +** database file cannot be changed, even by a process with higher +** privilege, and so the database is opened read-only and all locking +** and change detection is disabled. Caution: Setting the immutable +** property on a database file that does in fact change can result +** in incorrect query results and/or [SQLITE_CORRUPT] errors. +** See also: [SQLITE_IOCAP_IMMUTABLE]. +** **
    ** ** ^Specifying an unknown parameter in the query component of a URI is not an @@ -3067,8 +2975,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** Open file "data.db" in the current directory for read-only access. ** Regardless of whether or not shared-cache mode is enabled by ** default, use a private cache. -** file:/home/fred/data.db?vfs=unix-nolock -** Open file "/home/fred/data.db". Use the special VFS "unix-nolock". +** file:/home/fred/data.db?vfs=unix-dotfile +** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" +** that uses dot-files in place of posix advisory locking. ** file:data.db?mode=readonly ** An error. "readonly" is not a valid option for the "mode" parameter. ** @@ -3087,6 +2996,12 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** codepage is currently defined. Filenames containing international ** characters must be converted to UTF-8 prior to passing them into ** sqlite3_open() or sqlite3_open_v2(). +** +** Note to Windows Runtime users: The temporary directory must be set +** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various +** features that require the use of temporary files may fail. +** +** See also: [sqlite3_temp_directory] */ SQLITE_API int sqlite3_open( const char *filename, /* Database filename (UTF-8) */ @@ -3106,21 +3021,45 @@ SQLITE_API int sqlite3_open_v2( /* ** CAPI3REF: Obtain Values For URI Parameters ** -** This is a utility routine, useful to VFS implementations, that checks +** These are utility routines, useful to VFS implementations, that check ** to see if a database file was a URI that contained a specific query -** parameter, and if so obtains the value of the query parameter. -** -** The zFilename argument is the filename pointer passed into the xOpen() -** method of a VFS implementation. The zParam argument is the name of the -** query parameter we seek. This routine returns the value of the zParam -** parameter if it exists. If the parameter does not exist, this routine -** returns a NULL pointer. -** -** If the zFilename argument to this function is not a pointer that SQLite -** passed into the xOpen VFS method, then the behavior of this routine -** is undefined and probably undesirable. +** parameter, and if so obtains the value of that query parameter. +** +** If F is the database filename pointer passed into the xOpen() method of +** a VFS implementation when the flags parameter to xOpen() has one or +** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and +** P is the name of the query parameter, then +** sqlite3_uri_parameter(F,P) returns the value of the P +** parameter if it exists or a NULL pointer if P does not appear as a +** query parameter on F. If P is a query parameter of F +** has no explicit value, then sqlite3_uri_parameter(F,P) returns +** a pointer to an empty string. +** +** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean +** parameter and returns true (1) or false (0) according to the value +** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the +** value of query parameter P is one of "yes", "true", or "on" in any +** case or if the value begins with a non-zero number. The +** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of +** query parameter P is one of "no", "false", or "off" in any case or +** if the value begins with a numeric zero. If P is not a query +** parameter on F or if the value of P is does not match any of the +** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0). +** +** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a +** 64-bit signed integer and returns that integer, or D if P does not +** exist. If the value of P is something other than an integer, then +** zero is returned. +** +** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and +** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and +** is not a database file pathname pointer that SQLite passed into the xOpen +** VFS method, then the behavior of this routine is undefined and probably +** undesirable. */ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam); +SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault); +SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64); /* @@ -3142,6 +3081,11 @@ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char * ** However, the error string might be overwritten or deallocated by ** subsequent calls to other SQLite interface functions.)^ ** +** ^The sqlite3_errstr() interface returns the English-language text +** that describes the [result code], as UTF-8. +** ^(Memory to hold the error message string is managed internally +** and must not be freed by the application)^. +** ** When the serialized [threading mode] is in use, it might be the ** case that a second error occurs on a separate thread in between ** the time of the first error and the call to these interfaces. @@ -3160,6 +3104,7 @@ SQLITE_API int sqlite3_errcode(sqlite3 *db); SQLITE_API int sqlite3_extended_errcode(sqlite3 *db); SQLITE_API const char *sqlite3_errmsg(sqlite3*); SQLITE_API const void *sqlite3_errmsg16(sqlite3*); +SQLITE_API const char *sqlite3_errstr(int); /* ** CAPI3REF: SQL Statement Object @@ -3278,6 +3223,10 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(
    SQLITE_LIMIT_TRIGGER_DEPTH
    **
    The maximum depth of recursion for triggers.
    )^ +** +** [[SQLITE_LIMIT_WORKER_THREADS]] ^(
    SQLITE_LIMIT_WORKER_THREADS
    +**
    The maximum number of auxiliary worker threads that a single +** [prepared statement] may start.
    )^ ** */ #define SQLITE_LIMIT_LENGTH 0 @@ -3291,6 +3240,7 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); #define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 #define SQLITE_LIMIT_VARIABLE_NUMBER 9 #define SQLITE_LIMIT_TRIGGER_DEPTH 10 +#define SQLITE_LIMIT_WORKER_THREADS 11 /* ** CAPI3REF: Compiling An SQL Statement @@ -3316,7 +3266,8 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** that the supplied string is nul-terminated, then there is a small ** performance advantage to be gained by passing an nByte parameter that ** is equal to the number of bytes in the input string including -** the nul-terminator bytes. +** the nul-terminator bytes as this saves SQLite from having to +** make a copy of the input string. ** ** ^If pzTail is not NULL then *pzTail is made to point to the first byte ** past the end of the first SQL statement in zSql. These routines only @@ -3346,7 +3297,8 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); **
  • ** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it ** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. +** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY] +** retries will occur before sqlite3_step() gives up and returns an error. **
    • ** **
  • @@ -3367,8 +3319,7 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ^The specific value of WHERE-clause [parameter] might influence the ** choice of query plan if the parameter is the left-hand side of a [LIKE] ** or [GLOB] operator or if the parameter is compared to an indexed column -** and the [SQLITE_ENABLE_STAT2] compile-time option is enabled. -** the +** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. **
    • ** */ @@ -3441,6 +3392,25 @@ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); */ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt); +/* +** CAPI3REF: Determine If A Prepared Statement Has Been Reset +** +** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the +** [prepared statement] S has been stepped at least once using +** [sqlite3_step(S)] but has not run to completion and/or has not +** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S) +** interface returns false if S is a NULL pointer. If S is not a +** NULL pointer and is not a pointer to a valid [prepared statement] +** object, then the behavior is undefined and probably undesirable. +** +** This interface can be used in combination [sqlite3_next_stmt()] +** to locate all prepared statements associated with a database +** connection that are in need of being reset. This can be used, +** for example, in diagnostic routines to search for prepared +** statements that are holding a transaction open. +*/ +SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*); + /* ** CAPI3REF: Dynamically Typed Value Object ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} @@ -3531,18 +3501,31 @@ typedef struct sqlite3_context sqlite3_context; ** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). ** ** ^The third argument is the value to bind to the parameter. +** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16() +** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter +** is ignored and the end result is the same as sqlite3_bind_null(). ** ** ^(In those routines that have a fourth argument, its value is the ** number of bytes in the parameter. To be clear: the value is the ** number of bytes in the value, not the number of characters.)^ -** ^If the fourth parameter is negative, the length of the string is +** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16() +** is negative, then the length of the string is ** the number of bytes up to the first zero terminator. -** -** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and -** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or +** If the fourth parameter to sqlite3_bind_blob() is negative, then +** the behavior is undefined. +** If a non-negative fourth parameter is provided to sqlite3_bind_text() +** or sqlite3_bind_text16() or sqlite3_bind_text64() then +** that parameter must be the byte offset +** where the NUL terminator would occur assuming the string were NUL +** terminated. If any NUL characters occur at byte offsets less than +** the value of the fourth parameter then the resulting string value will +** contain embedded NULs. The result of expressions involving strings +** with embedded NULs is undefined. +** +** ^The fifth argument to the BLOB and string binding interfaces +** is a destructor used to dispose of the BLOB or ** string after SQLite has finished with it. ^The destructor is called -** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(), -** sqlite3_bind_text(), or sqlite3_bind_text16() fails. +** to dispose of the BLOB or string even if the call to bind API fails. ** ^If the fifth argument is ** the special value [SQLITE_STATIC], then SQLite assumes that the ** information is in static, unmanaged space and does not need to be freed. @@ -3550,6 +3533,14 @@ typedef struct sqlite3_context sqlite3_context; ** SQLite makes its own private copy of the data immediately, before ** the sqlite3_bind_*() routine returns. ** +** ^The sixth argument to sqlite3_bind_text64() must be one of +** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE] +** to specify the encoding of the text in the third parameter. If +** the sixth argument to sqlite3_bind_text64() is not one of the +** allowed values shown above, or if the text encoding is different +** from the encoding specified by the sixth parameter, then the behavior +** is undefined. +** ** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that ** is filled with zeroes. ^A zeroblob uses a fixed amount of memory ** (just an integer to hold its size) while it is being processed. @@ -3570,6 +3561,9 @@ typedef struct sqlite3_context sqlite3_context; ** ** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an ** [error code] if anything goes wrong. +** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB +** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or +** [SQLITE_MAX_LENGTH]. ** ^[SQLITE_RANGE] is returned if the parameter ** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. ** @@ -3577,12 +3571,16 @@ typedef struct sqlite3_context sqlite3_context; ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. */ SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64, + void(*)(void*)); SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*)); SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); +SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); @@ -3870,6 +3868,12 @@ SQLITE_API int sqlite3_step(sqlite3_stmt*); ** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of ** interfaces) then sqlite3_data_count(P) returns 0. ** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer. +** ^The sqlite3_data_count(P) routine returns 0 if the previous call to +** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P) +** will return non-zero if previous call to [sqlite3_step](P) returned +** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum] +** where it always returns zero since each step of that multi-step +** pragma returns 0 columns of data. ** ** See also: [sqlite3_column_count()] */ @@ -3969,7 +3973,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** bytes in the string, not the number of characters. ** ** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero terminated. ^The return +** even empty strings, are always zero-terminated. ^The return ** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer. ** ** ^The object returned by [sqlite3_column_value()] is an @@ -3992,19 +3996,19 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** ** NULL INTEGER Result is 0 ** NULL FLOAT Result is 0.0 -** NULL TEXT Result is NULL pointer -** NULL BLOB Result is NULL pointer +** NULL TEXT Result is a NULL pointer +** NULL BLOB Result is a NULL pointer ** INTEGER FLOAT Convert from integer to float ** INTEGER TEXT ASCII rendering of the integer ** INTEGER BLOB Same as INTEGER->TEXT -** FLOAT INTEGER Convert from float to integer +** FLOAT INTEGER [CAST] to INTEGER ** FLOAT TEXT ASCII rendering of the float -** FLOAT BLOB Same as FLOAT->TEXT -** TEXT INTEGER Use atoi() -** TEXT FLOAT Use atof() +** FLOAT BLOB [CAST] to BLOB +** TEXT INTEGER [CAST] to INTEGER +** TEXT FLOAT [CAST] to REAL ** TEXT BLOB No change -** BLOB INTEGER Convert to TEXT then use atoi() -** BLOB FLOAT Convert to TEXT then use atof() +** BLOB INTEGER [CAST] to INTEGER +** BLOB FLOAT [CAST] to REAL ** BLOB TEXT Add a zero terminator if needed ** ** )^ @@ -4060,7 +4064,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or ** [sqlite3_finalize()] is called. ^The memory space used to hold strings ** and BLOBs is freed automatically. Do not pass the pointers returned -** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into +** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** ** ^(If a memory allocation error occurs during the evaluation of any @@ -4169,15 +4173,24 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); ** ** ^The fourth parameter, eTextRep, specifies what ** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. Every SQL function implementation must be able to work -** with UTF-8, UTF-16le, or UTF-16be. But some implementations may be -** more efficient with one encoding than another. ^An application may -** invoke sqlite3_create_function() or sqlite3_create_function16() multiple -** times with the same function but with different values of eTextRep. +** its parameters. The application should set this parameter to +** [SQLITE_UTF16LE] if the function implementation invokes +** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the +** implementation invokes [sqlite3_value_text16be()] on an input, or +** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8] +** otherwise. ^The same SQL function may be registered multiple times using +** different preferred text encodings, with different implementations for +** each encoding. ** ^When multiple implementations of the same function are available, SQLite ** will pick the one that involves the least amount of data conversion. -** If there is only a single implementation which does not care what text -** encoding is used, then the fourth argument should be [SQLITE_ANY]. +** +** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC] +** to signal that the function will always return the same result given +** the same inputs within a single SQL statement. Most SQL functions are +** deterministic. The built-in [random()] SQL function is an example of a +** function that is not deterministic. The SQLite query planner is able to +** perform additional optimizations on deterministic functions, so use +** of the [SQLITE_DETERMINISTIC] flag is recommended where possible. ** ** ^(The fifth parameter is an arbitrary pointer. The implementation of the ** function can gain access to this pointer using [sqlite3_user_data()].)^ @@ -4263,9 +4276,19 @@ SQLITE_API int sqlite3_create_function_v2( #define SQLITE_UTF16LE 2 #define SQLITE_UTF16BE 3 #define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* sqlite3_create_function only */ +#define SQLITE_ANY 5 /* Deprecated */ #define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ +/* +** CAPI3REF: Function Flags +** +** These constants may be ORed together with the +** [SQLITE_UTF8 | preferred text encoding] as the fourth argument +** to [sqlite3_create_function()], [sqlite3_create_function16()], or +** [sqlite3_create_function_v2()]. +*/ +#define SQLITE_DETERMINISTIC 0x800 + /* ** CAPI3REF: Deprecated Functions ** DEPRECATED @@ -4282,7 +4305,8 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*); SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void); SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void); -SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64); +SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int), + void*,sqlite3_int64); #endif /* @@ -4305,7 +4329,7 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** object results in undefined behavior. ** ** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object +** except that these routines take a single [protected sqlite3_value] object ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. ** ** ^The sqlite3_value_text16() interface extracts a UTF-16 string @@ -4362,14 +4386,17 @@ SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); ** In those cases, sqlite3_aggregate_context() might be called for the ** first time from within xFinal().)^ ** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is -** less than or equal to zero or if a memory allocate error occurs. +** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer +** when first called if N is less than or equal to zero or if a memory +** allocate error occurs. ** ** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is ** determined by the N parameter on first successful call. Changing the ** value of N in subsequent call to sqlite3_aggregate_context() within ** the same aggregate function instance will not resize the memory -** allocation.)^ +** allocation.)^ Within the xFinal callback, it is customary to set +** N=0 in calls to sqlite3_aggregate_context(C,N) so that no +** pointless memory allocations occur. ** ** ^SQLite automatically frees the memory allocated by ** sqlite3_aggregate_context() when the aggregate query concludes. @@ -4412,41 +4439,49 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); /* ** CAPI3REF: Function Auxiliary Data ** -** The following two functions may be used by scalar SQL functions to +** These functions may be used by (non-aggregate) SQL functions to ** associate metadata with argument values. If the same value is passed to ** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. This may -** be used, for example, to add a regular-expression matching scalar -** function. The compiled version of the regular expression is stored as -** metadata associated with the SQL value passed as the regular expression -** pattern. The compiled regular expression can be reused on multiple -** invocations of the same function so that the original pattern string -** does not need to be recompiled on each invocation. +** some circumstances the associated metadata may be preserved. An example +** of where this might be useful is in a regular-expression matching +** function. The compiled version of the regular expression can be stored as +** metadata associated with the pattern string. +** Then as long as the pattern string remains the same, +** the compiled regular expression can be reused on multiple +** invocations of the same function. ** ** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata ** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If no metadata has been ever -** been set for the Nth argument of the function, or if the corresponding -** function parameter has changed since the meta-data was set, -** then sqlite3_get_auxdata() returns a NULL pointer. -** -** ^The sqlite3_set_auxdata() interface saves the metadata -** pointed to by its 3rd parameter as the metadata for the N-th -** argument of the application-defined function. Subsequent -** calls to sqlite3_get_auxdata() might return this data, if it has -** not been destroyed. -** ^If it is not NULL, SQLite will invoke the destructor -** function given by the 4th parameter to sqlite3_set_auxdata() on -** the metadata when the corresponding function parameter changes -** or when the SQL statement completes, whichever comes first. -** -** SQLite is free to call the destructor and drop metadata on any -** parameter of any function at any time. ^The only guarantee is that -** the destructor will be called before the metadata is dropped. +** value to the application-defined function. ^If there is no metadata +** associated with the function argument, this sqlite3_get_auxdata() interface +** returns a NULL pointer. +** +** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th +** argument of the application-defined function. ^Subsequent +** calls to sqlite3_get_auxdata(C,N) return P from the most recent +** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or +** NULL if the metadata has been discarded. +** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL, +** SQLite will invoke the destructor function X with parameter P exactly +** once, when the metadata is discarded. +** SQLite is free to discard the metadata at any time, including:
      +**
    • when the corresponding function parameter changes, or +**
    • when [sqlite3_reset()] or [sqlite3_finalize()] is called for the +** SQL statement, or +**
    • when sqlite3_set_auxdata() is invoked again on the same parameter, or +**
    • during the original sqlite3_set_auxdata() call when a memory +** allocation error occurs.
    )^ +** +** Note the last bullet in particular. The destructor X in +** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the +** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata() +** should be called near the end of the function implementation and the +** function implementation should not make any use of P after +** sqlite3_set_auxdata() has been called. ** ** ^(In practice, metadata is preserved between function calls for -** expressions that are constant at compile time. This includes literal -** values and [parameters].)^ +** function parameters that are compile-time constants, including literal +** values and [parameters] and expressions composed from the same.)^ ** ** These routines must be called from the same thread in which ** the SQL function is running. @@ -4467,7 +4502,7 @@ SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(voi ** the content before returning. ** ** The typedef is necessary to work around problems in certain -** C++ compilers. See ticket #2191. +** C++ compilers. */ typedef void (*sqlite3_destructor_type)(void*); #define SQLITE_STATIC ((sqlite3_destructor_type)0) @@ -4520,11 +4555,11 @@ typedef void (*sqlite3_destructor_type)(void*); ** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() ** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. ** -** ^The sqlite3_result_toobig() interface causes SQLite to throw an error -** indicating that a string or BLOB is too long to represent. +** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an +** error indicating that a string or BLOB is too long to represent. ** -** ^The sqlite3_result_nomem() interface causes SQLite to throw an error -** indicating that a memory allocation failed. +** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an +** error indicating that a memory allocation failed. ** ** ^The sqlite3_result_int() interface sets the return value ** of the application-defined function to be the 32-bit signed integer @@ -4541,6 +4576,10 @@ typedef void (*sqlite3_destructor_type)(void*); ** set the return value of the application-defined function to be ** a text string which is represented as UTF-8, UTF-16 native byte order, ** UTF-16 little endian, or UTF-16 big endian, respectively. +** ^The sqlite3_result_text64() interface sets the return value of an +** application-defined function to be a text string in an encoding +** specified by the fifth (and last) parameter, which must be one +** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. ** ^SQLite takes the text result from the application from ** the 2nd parameter of the sqlite3_result_text* interfaces. ** ^If the 3rd parameter to the sqlite3_result_text* interfaces @@ -4549,7 +4588,12 @@ typedef void (*sqlite3_destructor_type)(void*); ** ^If the 3rd parameter to the sqlite3_result_text* interfaces ** is non-negative, then as many bytes (not characters) of the text ** pointed to by the 2nd parameter are taken as the application-defined -** function result. +** function result. If the 3rd parameter is non-negative, then it +** must be the byte offset into the string where the NUL terminator would +** appear if the string where NUL terminated. If any NUL characters occur +** in the string at a byte offset that is less than the value of the 3rd +** parameter, then the resulting string will contain embedded NULs and the +** result of expressions operating on strings with embedded NULs is undefined. ** ^If the 4th parameter to the sqlite3_result_text* interfaces ** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that ** function as the destructor on the text or BLOB result when it has @@ -4579,6 +4623,7 @@ typedef void (*sqlite3_destructor_type)(void*); ** the [sqlite3_context] pointer, the results are undefined. */ SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,sqlite3_uint64,void(*)(void*)); SQLITE_API void sqlite3_result_double(sqlite3_context*, double); SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); @@ -4589,6 +4634,8 @@ SQLITE_API void sqlite3_result_int(sqlite3_context*, int); SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); SQLITE_API void sqlite3_result_null(sqlite3_context*); SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); @@ -4746,6 +4793,11 @@ SQLITE_API int sqlite3_key( sqlite3 *db, /* Database to be rekeyed */ const void *pKey, int nKey /* The key */ ); +SQLITE_API int sqlite3_key_v2( + sqlite3 *db, /* Database to be rekeyed */ + const char *zDbName, /* Name of the database */ + const void *pKey, int nKey /* The key */ +); /* ** Change the key on an open database. If the current database is not @@ -4759,6 +4811,11 @@ SQLITE_API int sqlite3_rekey( sqlite3 *db, /* Database to be rekeyed */ const void *pKey, int nKey /* The new key */ ); +SQLITE_API int sqlite3_rekey_v2( + sqlite3 *db, /* Database to be rekeyed */ + const char *zDbName, /* Name of the database */ + const void *pKey, int nKey /* The new key */ +); /* ** Specify the activation key for a SEE database. Unless @@ -4808,6 +4865,13 @@ SQLITE_API int sqlite3_sleep(int); ** is a NULL pointer, then SQLite performs a search for an appropriate ** temporary file directory. ** +** Applications are strongly discouraged from using this global variable. +** It is required to set a temporary folder on Windows Runtime (WinRT). +** But for all other platforms, it is highly recommended that applications +** neither read nor write this variable. This global variable is a relic +** that exists for backwards compatibility of legacy applications and should +** be avoided in new projects. +** ** It is not safe to read or modify this variable in more than one ** thread at a time. It is not safe to read or modify this variable ** if a [database connection] is being used at the same time in a separate @@ -4826,9 +4890,66 @@ SQLITE_API int sqlite3_sleep(int); ** Hence, if this variable is modified directly, either it should be ** made NULL or made to point to memory obtained from [sqlite3_malloc] ** or else the use of the [temp_store_directory pragma] should be avoided. +** Except when requested by the [temp_store_directory pragma], SQLite +** does not free the memory that sqlite3_temp_directory points to. If +** the application wants that memory to be freed, it must do +** so itself, taking care to only do so after all [database connection] +** objects have been destroyed. +** +** Note to Windows Runtime users: The temporary directory must be set +** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various +** features that require the use of temporary files may fail. Here is an +** example of how to do this using C++ with the Windows Runtime: +** +** 
    +** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
+**       TemporaryFolder->Path->Data();
+** char zPathBuf[MAX_PATH + 1];
+** memset(zPathBuf, 0, sizeof(zPathBuf));
+** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
+**       NULL, NULL);
+** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
+**
    */ SQLITE_API char *sqlite3_temp_directory; +/* +** CAPI3REF: Name Of The Folder Holding Database Files +** +** ^(If this global variable is made to point to a string which is +** the name of a folder (a.k.a. directory), then all database files +** specified with a relative pathname and created or accessed by +** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed +** to be relative to that directory.)^ ^If this variable is a NULL +** pointer, then SQLite assumes that all database files specified +** with a relative pathname are relative to the current directory +** for the process. Only the windows VFS makes use of this global +** variable; it is ignored by the unix VFS. +** +** Changing the value of this variable while a database connection is +** open can result in a corrupt database. +** +** It is not safe to read or modify this variable in more than one +** thread at a time. It is not safe to read or modify this variable +** if a [database connection] is being used at the same time in a separate +** thread. +** It is intended that this variable be set once +** as part of process initialization and before any SQLite interface +** routines have been called and that this variable remain unchanged +** thereafter. +** +** ^The [data_store_directory pragma] may modify this variable and cause +** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, +** the [data_store_directory pragma] always assumes that any string +** that this variable points to is held in memory obtained from +** [sqlite3_malloc] and the pragma may attempt to free that memory +** using [sqlite3_free]. +** Hence, if this variable is modified directly, either it should be +** made NULL or made to point to memory obtained from [sqlite3_malloc] +** or else the use of the [data_store_directory pragma] should be avoided. +*/ +SQLITE_API char *sqlite3_data_directory; + /* ** CAPI3REF: Test For Auto-Commit Mode ** KEYWORDS: {autocommit mode} @@ -4864,6 +4985,31 @@ SQLITE_API int sqlite3_get_autocommit(sqlite3*); */ SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*); +/* +** CAPI3REF: Return The Filename For A Database Connection +** +** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename +** associated with database N of connection D. ^The main database file +** has the name "main". If there is no attached database N on the database +** connection D, or if database N is a temporary or in-memory database, then +** a NULL pointer is returned. +** +** ^The filename returned by this function is the output of the +** xFullPathname method of the [VFS]. ^In other words, the filename +** will be an absolute pathname, even if the filename used +** to open the database originally was a URI or relative pathname. +*/ +SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName); + +/* +** CAPI3REF: Determine if a database is read-only +** +** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N +** of connection D is read-only, 0 if it is read/write, or -1 if N is not +** the name of a database on connection D. +*/ +SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName); + /* ** CAPI3REF: Find the next prepared statement ** @@ -4899,13 +5045,15 @@ SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt); ** on the same [database connection] D, or NULL for ** the first call for each function on D. ** +** The commit and rollback hook callbacks are not reentrant. ** The callback implementation must not do anything that will modify ** the database connection that invoked the callback. Any actions ** to modify the database connection must be deferred until after the ** completion of the [sqlite3_step()] call that triggered the commit ** or rollback hook in the first place. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. +** Note that running any other SQL statements, including SELECT statements, +** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify +** the database connections for the meaning of "modify" in this paragraph. ** ** ^Registering a NULL function disables the callback. ** @@ -4931,12 +5079,13 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^The sqlite3_update_hook() interface registers a callback function ** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted. +** to be invoked whenever a row is updated, inserted or deleted in +** a rowid table. ** ^Any callback set by a previous call to this function ** for the same database connection is overridden. ** ** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted. +** row is updated, inserted or deleted in a rowid table. ** ^The first argument to the callback is a copy of the third argument ** to sqlite3_update_hook(). ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], @@ -4949,6 +5098,7 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^(The update hook is not invoked when internal system tables are ** modified (i.e. sqlite_master and sqlite_sequence).)^ +** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified. ** ** ^In the current implementation, the update hook ** is not invoked when duplication rows are deleted because of an @@ -4980,7 +5130,6 @@ SQLITE_API void *sqlite3_update_hook( /* ** CAPI3REF: Enable Or Disable Shared Pager Cache -** KEYWORDS: {shared cache} ** ** ^(This routine enables or disables the sharing of the database cache ** and schema data structures between [database connection | connections] @@ -5003,6 +5152,9 @@ SQLITE_API void *sqlite3_update_hook( ** future releases of SQLite. Applications that care about shared ** cache setting should set it explicitly. ** +** This interface is threadsafe on processors where writing a +** 32-bit integer is atomic. +** ** See Also: [SQLite Shared-Cache Mode] */ SQLITE_API int sqlite3_enable_shared_cache(int); @@ -5018,9 +5170,24 @@ SQLITE_API int sqlite3_enable_shared_cache(int); ** which might be more or less than the amount requested. ** ^The sqlite3_release_memory() routine is a no-op returning zero ** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT]. +** +** See also: [sqlite3_db_release_memory()] */ SQLITE_API int sqlite3_release_memory(int); +/* +** CAPI3REF: Free Memory Used By A Database Connection +** +** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap +** memory as possible from database connection D. Unlike the +** [sqlite3_release_memory()] interface, this interface is in effect even +** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is +** omitted. +** +** See also: [sqlite3_release_memory()] +*/ +SQLITE_API int sqlite3_db_release_memory(sqlite3*); + /* ** CAPI3REF: Impose A Limit On Heap Size ** @@ -5035,7 +5202,8 @@ SQLITE_API int sqlite3_release_memory(int); ** is advisory only. ** ** ^The return value from sqlite3_soft_heap_limit64() is the size of -** the soft heap limit prior to the call. ^If the argument N is negative +** the soft heap limit prior to the call, or negative in the case of an +** error. ^If the argument N is negative ** then no change is made to the soft heap limit. Hence, the current ** size of the soft heap limit can be determined by invoking ** sqlite3_soft_heap_limit64() with a negative argument. @@ -5051,7 +5219,7 @@ SQLITE_API int sqlite3_release_memory(int); ** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and ** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option. **
  • An alternative page cache implementation is specified using -** [sqlite3_config]([SQLITE_CONFIG_PCACHE],...). +** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...). **
  • The page cache allocates from its own memory pool supplied ** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than ** from the heap. @@ -5164,11 +5332,20 @@ SQLITE_API int sqlite3_table_column_metadata( ** ^This interface loads an SQLite extension library from the named file. ** ** ^The sqlite3_load_extension() interface attempts to load an -** SQLite extension library contained in the file zFile. +** [SQLite extension] library contained in the file zFile. If +** the file cannot be loaded directly, attempts are made to load +** with various operating-system specific extensions added. +** So for example, if "samplelib" cannot be loaded, then names like +** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might +** be tried also. ** ** ^The entry point is zProc. -** ^zProc may be 0, in which case the name of the entry point -** defaults to "sqlite3_extension_init". +** ^(zProc may be 0, in which case SQLite will try to come up with an +** entry point name on its own. It first tries "sqlite3_extension_init". +** If that does not work, it constructs a name "sqlite3_X_init" where the +** X is consists of the lower-case equivalent of all ASCII alphabetic +** characters in the filename from the last "/" to the first following +** "." and omitting any initial "lib".)^ ** ^The sqlite3_load_extension() interface returns ** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. ** ^If an error occurs and pzErrMsg is not 0, then the @@ -5194,11 +5371,11 @@ SQLITE_API int sqlite3_load_extension( ** CAPI3REF: Enable Or Disable Extension Loading ** ** ^So as not to open security holes in older applications that are -** unprepared to deal with extension loading, and as a means of disabling -** extension loading while evaluating user-entered SQL, the following API +** unprepared to deal with [extension loading], and as a means of disabling +** [extension loading] while evaluating user-entered SQL, the following API ** is provided to turn the [sqlite3_load_extension()] mechanism on and off. ** -** ^Extension loading is off by default. See ticket #1863. +** ^Extension loading is off by default. ** ^Call the sqlite3_enable_load_extension() routine with onoff==1 ** to turn extension loading on and call it with onoff==0 to turn ** it back off again. @@ -5210,7 +5387,7 @@ SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); ** ** ^This interface causes the xEntryPoint() function to be invoked for ** each new [database connection] that is created. The idea here is that -** xEntryPoint() is the entry point for a statically linked SQLite extension +** xEntryPoint() is the entry point for a statically linked [SQLite extension] ** that is to be automatically loaded into all new database connections. ** ** ^(Even though the function prototype shows that xEntryPoint() takes @@ -5238,10 +5415,23 @@ SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); ** on the list of automatic extensions is a harmless no-op. ^No entry point ** will be called more than once for each database connection that is opened. ** -** See also: [sqlite3_reset_auto_extension()]. +** See also: [sqlite3_reset_auto_extension()] +** and [sqlite3_cancel_auto_extension()] */ SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void)); +/* +** CAPI3REF: Cancel Automatic Extension Loading +** +** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the +** initialization routine X that was registered using a prior call to +** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)] +** routine returns 1 if initialization routine X was successfully +** unregistered and it returns 0 if X was not on the list of initialization +** routines. +*/ +SQLITE_API int sqlite3_cancel_auto_extension(void (*xEntryPoint)(void)); + /* ** CAPI3REF: Reset Automatic Extension Loading ** @@ -5366,10 +5556,22 @@ struct sqlite3_module { ** the correct order to satisfy the ORDER BY clause so that no separate ** sorting step is required. ** -** ^The estimatedCost value is an estimate of the cost of doing the -** particular lookup. A full scan of a table with N entries should have -** a cost of N. A binary search of a table of N entries should have a -** cost of approximately log(N). +** ^The estimatedCost value is an estimate of the cost of a particular +** strategy. A cost of N indicates that the cost of the strategy is similar +** to a linear scan of an SQLite table with N rows. A cost of log(N) +** indicates that the expense of the operation is similar to that of a +** binary search on a unique indexed field of an SQLite table with N rows. +** +** ^The estimatedRows value is an estimate of the number of rows that +** will be returned by the strategy. +** +** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info +** structure for SQLite version 3.8.2. If a virtual table extension is +** used with an SQLite version earlier than 3.8.2, the results of attempting +** to read or write the estimatedRows field are undefined (but are likely +** to included crashing the application). The estimatedRows field should +** therefore only be used if [sqlite3_libversion_number()] returns a +** value greater than or equal to 3008002. */ struct sqlite3_index_info { /* Inputs */ @@ -5394,7 +5596,9 @@ struct sqlite3_index_info { char *idxStr; /* String, possibly obtained from sqlite3_malloc */ int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ + double estimatedCost; /* Estimated cost of using this index */ + /* Fields below are only available in SQLite 3.8.2 and later */ + sqlite3_int64 estimatedRows; /* Estimated number of rows returned */ }; /* @@ -5598,6 +5802,9 @@ typedef struct sqlite3_blob sqlite3_blob; ** interface. Use the [UPDATE] SQL command to change the size of a ** blob. ** +** ^The [sqlite3_blob_open()] interface will fail for a [WITHOUT ROWID] +** table. Incremental BLOB I/O is not possible on [WITHOUT ROWID] tables. +** ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces ** and the built-in [zeroblob] SQL function can be used, if desired, ** to create an empty, zero-filled blob in which to read or write using @@ -5792,17 +5999,16 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); ** implementations are available in the SQLite core: ** **
      -**
    • SQLITE_MUTEX_OS2 -**
    • SQLITE_MUTEX_PTHREAD +**
    • SQLITE_MUTEX_PTHREADS **
    • SQLITE_MUTEX_W32 **
    • SQLITE_MUTEX_NOOP **
    )^ ** ** ^The SQLITE_MUTEX_NOOP implementation is a set of routines ** that does no real locking and is appropriate for use in -** a single-threaded application. ^The SQLITE_MUTEX_OS2, -** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations -** are appropriate for use on OS/2, Unix, and Windows. +** a single-threaded application. ^The SQLITE_MUTEX_PTHREADS and +** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix +** and Windows. ** ** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex @@ -5823,10 +6029,12 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); **
  • SQLITE_MUTEX_RECURSIVE **
  • SQLITE_MUTEX_STATIC_MASTER **
  • SQLITE_MUTEX_STATIC_MEM -**
  • SQLITE_MUTEX_STATIC_MEM2 +**
  • SQLITE_MUTEX_STATIC_OPEN **
  • SQLITE_MUTEX_STATIC_PRNG **
  • SQLITE_MUTEX_STATIC_LRU -**
  • SQLITE_MUTEX_STATIC_LRU2 +**
  • SQLITE_MUTEX_STATIC_PMEM +**
  • SQLITE_MUTEX_STATIC_APP1 +**
  • SQLITE_MUTEX_STATIC_APP2 **
)^ ** ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) @@ -5991,7 +6199,7 @@ struct sqlite3_mutex_methods { ** ^These routines should return true if the mutex in their argument ** is held or not held, respectively, by the calling thread. ** -** ^The implementation is not required to provided versions of these +** ^The implementation is not required to provide versions of these ** routines that actually work. If the implementation does not provide working ** versions of these routines, it should at least provide stubs that always ** return true so that one does not get spurious assertion failures. @@ -6030,6 +6238,9 @@ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*); #define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ #define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */ #define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */ +#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */ /* ** CAPI3REF: Retrieve the mutex for a database connection @@ -6119,10 +6330,15 @@ SQLITE_API int sqlite3_test_control(int op, ...); #define SQLITE_TESTCTRL_RESERVE 14 #define SQLITE_TESTCTRL_OPTIMIZATIONS 15 #define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_PGHDRSZ 17 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 18 -#define SQLITE_TESTCTRL_LOCALTIME_FAULT 19 -#define SQLITE_TESTCTRL_LAST 19 +#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 +#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 +#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ +#define SQLITE_TESTCTRL_NEVER_CORRUPT 20 +#define SQLITE_TESTCTRL_VDBE_COVERAGE 21 +#define SQLITE_TESTCTRL_BYTEORDER 22 +#define SQLITE_TESTCTRL_ISINIT 23 +#define SQLITE_TESTCTRL_SORTER_MMAP 24 +#define SQLITE_TESTCTRL_LAST 24 /* ** CAPI3REF: SQLite Runtime Status @@ -6313,12 +6529,12 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r ** the current value is always zero.)^ ** ** [[SQLITE_DBSTATUS_CACHE_USED]] ^(
SQLITE_DBSTATUS_CACHE_USED
-**
This parameter returns the approximate number of of bytes of heap +**
This parameter returns the approximate number of bytes of heap ** memory used by all pager caches associated with the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0. ** ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(
SQLITE_DBSTATUS_SCHEMA_USED
-**
This parameter returns the approximate number of of bytes of heap +**
This parameter returns the approximate number of bytes of heap ** memory used to store the schema for all databases associated ** with the connection - main, temp, and any [ATTACH]-ed databases.)^ ** ^The full amount of memory used by the schemas is reported, even if the @@ -6327,11 +6543,40 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0. ** ** [[SQLITE_DBSTATUS_STMT_USED]] ^(
SQLITE_DBSTATUS_STMT_USED
-**
This parameter returns the approximate number of of bytes of heap +**
This parameter returns the approximate number of bytes of heap ** and lookaside memory used by all prepared statements associated with ** the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0. **
+** +** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(
SQLITE_DBSTATUS_CACHE_HIT
+**
This parameter returns the number of pager cache hits that have +** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT +** is always 0. +**
+** +** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(
SQLITE_DBSTATUS_CACHE_MISS
+**
This parameter returns the number of pager cache misses that have +** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS +** is always 0. +**
+** +** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(
SQLITE_DBSTATUS_CACHE_WRITE
+**
This parameter returns the number of dirty cache entries that have +** been written to disk. Specifically, the number of pages written to the +** wal file in wal mode databases, or the number of pages written to the +** database file in rollback mode databases. Any pages written as part of +** transaction rollback or database recovery operations are not included. +** If an IO or other error occurs while writing a page to disk, the effect +** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The +** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. +**
+** +** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(
SQLITE_DBSTATUS_DEFERRED_FKS
+**
This parameter returns zero for the current value if and only if +** all foreign key constraints (deferred or immediate) have been +** resolved.)^ ^The highwater mark is always 0. +**
** */ #define SQLITE_DBSTATUS_LOOKASIDE_USED 0 @@ -6341,7 +6586,11 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r #define SQLITE_DBSTATUS_LOOKASIDE_HIT 4 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6 -#define SQLITE_DBSTATUS_MAX 6 /* Largest defined DBSTATUS */ +#define SQLITE_DBSTATUS_CACHE_HIT 7 +#define SQLITE_DBSTATUS_CACHE_MISS 8 +#define SQLITE_DBSTATUS_CACHE_WRITE 9 +#define SQLITE_DBSTATUS_DEFERRED_FKS 10 +#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */ /* @@ -6396,11 +6645,20 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); ** improvement performance by adding permanent indices that do not ** need to be reinitialized each time the statement is run. ** +** [[SQLITE_STMTSTATUS_VM_STEP]]
SQLITE_STMTSTATUS_VM_STEP
+**
^This is the number of virtual machine operations executed +** by the prepared statement if that number is less than or equal +** to 2147483647. The number of virtual machine operations can be +** used as a proxy for the total work done by the prepared statement. +** If the number of virtual machine operations exceeds 2147483647 +** then the value returned by this statement status code is undefined. +**
** */ #define SQLITE_STMTSTATUS_FULLSCAN_STEP 1 #define SQLITE_STMTSTATUS_SORT 2 #define SQLITE_STMTSTATUS_AUTOINDEX 3 +#define SQLITE_STMTSTATUS_VM_STEP 4 /* ** CAPI3REF: Custom Page Cache Object @@ -6411,17 +6669,33 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); ** sqlite3_pcache object except by holding and passing pointers ** to the object. ** -** See [sqlite3_pcache_methods] for additional information. +** See [sqlite3_pcache_methods2] for additional information. */ typedef struct sqlite3_pcache sqlite3_pcache; +/* +** CAPI3REF: Custom Page Cache Object +** +** The sqlite3_pcache_page object represents a single page in the +** page cache. The page cache will allocate instances of this +** object. Various methods of the page cache use pointers to instances +** of this object as parameters or as their return value. +** +** See [sqlite3_pcache_methods2] for additional information. +*/ +typedef struct sqlite3_pcache_page sqlite3_pcache_page; +struct sqlite3_pcache_page { + void *pBuf; /* The content of the page */ + void *pExtra; /* Extra information associated with the page */ +}; + /* ** CAPI3REF: Application Defined Page Cache. ** KEYWORDS: {page cache} ** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can +** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can ** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods structure.)^ +** instance of the sqlite3_pcache_methods2 structure.)^ ** In many applications, most of the heap memory allocated by ** SQLite is used for the page cache. ** By implementing a @@ -6435,7 +6709,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** extreme measure that is only needed by the most demanding applications. ** The built-in page cache is recommended for most uses. ** -** ^(The contents of the sqlite3_pcache_methods structure are copied to an +** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an ** internal buffer by SQLite within the call to [sqlite3_config]. Hence ** the application may discard the parameter after the call to ** [sqlite3_config()] returns.)^ @@ -6444,7 +6718,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ^(The xInit() method is called once for each effective ** call to [sqlite3_initialize()])^ ** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^ +** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^ ** The intent of the xInit() method is to set up global data structures ** required by the custom page cache implementation. ** ^(If the xInit() method is NULL, then the @@ -6471,17 +6745,15 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** SQLite will typically create one cache instance for each open database file, ** though this is not guaranteed. ^The ** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will not be a power of two. ^szPage -** will the page size of the database file that is to be cached plus an -** increment (here called "R") of less than 250. SQLite will use the -** extra R bytes on each page to store metadata about the underlying -** database page on disk. The value of R depends +** be allocated by the cache. ^szPage will always a power of two. ^The +** second parameter szExtra is a number of bytes of extra storage +** associated with each page cache entry. ^The szExtra parameter will +** a number less than 250. SQLite will use the +** extra szExtra bytes on each page to store metadata about the underlying +** database page on disk. The value passed into szExtra depends ** on the SQLite version, the target platform, and how SQLite was compiled. -** ^(R is constant for a particular build of SQLite. Except, there are two -** distinct values of R when SQLite is compiled with the proprietary -** ZIPVFS extension.)^ ^The second argument to -** xCreate(), bPurgeable, is true if the cache being created will -** be used to cache database pages of a file stored on disk, or +** ^The third argument to xCreate(), bPurgeable, is true if the cache being +** created will be used to cache database pages of a file stored on disk, or ** false if it is used for an in-memory database. The cache implementation ** does not have to do anything special based with the value of bPurgeable; ** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will @@ -6505,11 +6777,16 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ** [[the xFetch() page cache methods]] ** The xFetch() method locates a page in the cache and returns a pointer to -** the page, or a NULL pointer. -** A "page", in this context, means a buffer of szPage bytes aligned at an -** 8-byte boundary. The page to be fetched is determined by the key. ^The -** minimum key value is 1. After it has been retrieved using xFetch, the page -** is considered to be "pinned". +** an sqlite3_pcache_page object associated with that page, or a NULL pointer. +** The pBuf element of the returned sqlite3_pcache_page object will be a +** pointer to a buffer of szPage bytes used to store the content of a +** single database page. The pExtra element of sqlite3_pcache_page will be +** a pointer to the szExtra bytes of extra storage that SQLite has requested +** for each entry in the page cache. +** +** The page to be fetched is determined by the key. ^The minimum key value +** is 1. After it has been retrieved using xFetch, the page is considered +** to be "pinned". ** ** If the requested page is already in the page cache, then the page cache ** implementation must return a pointer to the page buffer with its content @@ -6518,7 +6795,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** parameter to help it determined what action to take: ** ** -**
createFlag Behaviour when page is not already in cache +**
createFlag Behavior when page is not already in cache **
0 Do not allocate a new page. Return NULL. **
1 Allocate a new page if it easy and convenient to do so. ** Otherwise return NULL. @@ -6562,8 +6839,37 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ^The xDestroy() method is used to delete a cache allocated by xCreate(). ** All resources associated with the specified cache should be freed. ^After ** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods +** handle invalid, and will not use it with any other sqlite3_pcache_methods2 ** functions. +** +** [[the xShrink() page cache method]] +** ^SQLite invokes the xShrink() method when it wants the page cache to +** free up as much of heap memory as possible. The page cache implementation +** is not obligated to free any memory, but well-behaved implementations should +** do their best. +*/ +typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2; +struct sqlite3_pcache_methods2 { + int iVersion; + void *pArg; + int (*xInit)(void*); + void (*xShutdown)(void*); + sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable); + void (*xCachesize)(sqlite3_pcache*, int nCachesize); + int (*xPagecount)(sqlite3_pcache*); + sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); + void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard); + void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*, + unsigned oldKey, unsigned newKey); + void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); + void (*xDestroy)(sqlite3_pcache*); + void (*xShrink)(sqlite3_pcache*); +}; + +/* +** This is the obsolete pcache_methods object that has now been replaced +** by sqlite3_pcache_methods2. This object is not used by SQLite. It is +** retained in the header file for backwards compatibility only. */ typedef struct sqlite3_pcache_methods sqlite3_pcache_methods; struct sqlite3_pcache_methods { @@ -6580,6 +6886,7 @@ struct sqlite3_pcache_methods { void (*xDestroy)(sqlite3_pcache*); }; + /* ** CAPI3REF: Online Backup Object ** @@ -6909,17 +7216,33 @@ SQLITE_API int sqlite3_unlock_notify( /* ** CAPI3REF: String Comparison ** -** ^The [sqlite3_strnicmp()] API allows applications and extensions to -** compare the contents of two buffers containing UTF-8 strings in a -** case-independent fashion, using the same definition of case independence -** that SQLite uses internally when comparing identifiers. +** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications +** and extensions to compare the contents of two buffers containing UTF-8 +** strings in a case-independent fashion, using the same definition of "case +** independence" that SQLite uses internally when comparing identifiers. */ +SQLITE_API int sqlite3_stricmp(const char *, const char *); SQLITE_API int sqlite3_strnicmp(const char *, const char *, int); +/* +** CAPI3REF: String Globbing +* +** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches +** the glob pattern P, and it returns non-zero if string X does not match +** the glob pattern P. ^The definition of glob pattern matching used in +** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the +** SQL dialect used by SQLite. ^The sqlite3_strglob(P,X) function is case +** sensitive. +** +** Note that this routine returns zero on a match and non-zero if the strings +** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()]. +*/ +SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr); + /* ** CAPI3REF: Error Logging Interface ** -** ^The [sqlite3_log()] interface writes a message into the error log +** ^The [sqlite3_log()] interface writes a message into the [error log] ** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. ** ^If logging is enabled, the zFormat string and subsequent arguments are ** used with [sqlite3_snprintf()] to generate the final output string. @@ -6999,6 +7322,9 @@ SQLITE_API void *sqlite3_wal_hook( ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface ** from SQL. ** +** ^Checkpoints initiated by this mechanism are +** [sqlite3_wal_checkpoint_v2|PASSIVE]. +** ** ^Every new [database connection] defaults to having the auto-checkpoint ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT] ** pages. The use of this interface @@ -7015,6 +7341,10 @@ SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N); ** empty string, then a checkpoint is run on all databases of ** connection D. ^If the database connection D is not in ** [WAL | write-ahead log mode] then this interface is a harmless no-op. +** ^The [sqlite3_wal_checkpoint(D,X)] interface initiates a +** [sqlite3_wal_checkpoint_v2|PASSIVE] checkpoint. +** Use the [sqlite3_wal_checkpoint_v2()] interface to get a FULL +** or RESET checkpoint. ** ** ^The [wal_checkpoint pragma] can be used to invoke this interface ** from SQL. ^The [sqlite3_wal_autocheckpoint()] interface and the @@ -7037,10 +7367,12 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); ** Checkpoint as many frames as possible without waiting for any database ** readers or writers to finish. Sync the db file if all frames in the log ** are checkpointed. This mode is the same as calling -** sqlite3_wal_checkpoint(). The busy-handler callback is never invoked. +** sqlite3_wal_checkpoint(). The [sqlite3_busy_handler|busy-handler callback] +** is never invoked. ** **
SQLITE_CHECKPOINT_FULL
-** This mode blocks (calls the busy-handler callback) until there is no +** This mode blocks (it invokes the +** [sqlite3_busy_handler|busy-handler callback]) until there is no ** database writer and all readers are reading from the most recent database ** snapshot. It then checkpoints all frames in the log file and syncs the ** database file. This call blocks database writers while it is running, @@ -7048,7 +7380,8 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); ** **
SQLITE_CHECKPOINT_RESTART
** This mode works the same way as SQLITE_CHECKPOINT_FULL, except after -** checkpointing the log file it blocks (calls the busy-handler callback) +** checkpointing the log file it blocks (calls the +** [sqlite3_busy_handler|busy-handler callback]) ** until all readers are reading from the database file only. This ensures ** that the next client to write to the database file restarts the log file ** from the beginning. This call blocks database writers while it is running, @@ -7186,6 +7519,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); /* ** CAPI3REF: Conflict resolution modes +** KEYWORDS: {conflict resolution mode} ** ** These constants are returned by [sqlite3_vtab_on_conflict()] to ** inform a [virtual table] implementation what the [ON CONFLICT] mode @@ -7214,7 +7548,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); #if 0 } /* End of the 'extern "C"' block */ #endif -#endif +#endif /* _SQLITE3_H_ */ /* ** 2010 August 30 @@ -7238,6 +7572,16 @@ extern "C" { #endif typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; +typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info; + +/* The double-precision datatype used by RTree depends on the +** SQLITE_RTREE_INT_ONLY compile-time option. +*/ +#ifdef SQLITE_RTREE_INT_ONLY + typedef sqlite3_int64 sqlite3_rtree_dbl; +#else + typedef double sqlite3_rtree_dbl; +#endif /* ** Register a geometry callback named zGeom that can be used as part of an @@ -7248,7 +7592,7 @@ typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; SQLITE_API int sqlite3_rtree_geometry_callback( sqlite3 *db, const char *zGeom, - int (*xGeom)(sqlite3_rtree_geometry *, int nCoord, double *aCoord, int *pRes), + int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*), void *pContext ); @@ -7260,11 +7604,60 @@ SQLITE_API int sqlite3_rtree_geometry_callback( struct sqlite3_rtree_geometry { void *pContext; /* Copy of pContext passed to s_r_g_c() */ int nParam; /* Size of array aParam[] */ - double *aParam; /* Parameters passed to SQL geom function */ + sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */ void *pUser; /* Callback implementation user data */ void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */ }; +/* +** Register a 2nd-generation geometry callback named zScore that can be +** used as part of an R-Tree geometry query as follows: +** +** SELECT ... FROM WHERE MATCH $zQueryFunc(... params ...) +*/ +SQLITE_API int sqlite3_rtree_query_callback( + sqlite3 *db, + const char *zQueryFunc, + int (*xQueryFunc)(sqlite3_rtree_query_info*), + void *pContext, + void (*xDestructor)(void*) +); + + +/* +** A pointer to a structure of the following type is passed as the +** argument to scored geometry callback registered using +** sqlite3_rtree_query_callback(). +** +** Note that the first 5 fields of this structure are identical to +** sqlite3_rtree_geometry. This structure is a subclass of +** sqlite3_rtree_geometry. +*/ +struct sqlite3_rtree_query_info { + void *pContext; /* pContext from when function registered */ + int nParam; /* Number of function parameters */ + sqlite3_rtree_dbl *aParam; /* value of function parameters */ + void *pUser; /* callback can use this, if desired */ + void (*xDelUser)(void*); /* function to free pUser */ + sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */ + unsigned int *anQueue; /* Number of pending entries in the queue */ + int nCoord; /* Number of coordinates */ + int iLevel; /* Level of current node or entry */ + int mxLevel; /* The largest iLevel value in the tree */ + sqlite3_int64 iRowid; /* Rowid for current entry */ + sqlite3_rtree_dbl rParentScore; /* Score of parent node */ + int eParentWithin; /* Visibility of parent node */ + int eWithin; /* OUT: Visiblity */ + sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ +}; + +/* +** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin. +*/ +#define NOT_WITHIN 0 /* Object completely outside of query region */ +#define PARTLY_WITHIN 1 /* Object partially overlaps query region */ +#define FULLY_WITHIN 2 /* Object fully contained within query region */ + #if 0 } /* end of the 'extern "C"' block */ @@ -7275,10 +7668,19 @@ struct sqlite3_rtree_geometry { /************** End of sqlite3.h *********************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include hash.h in the middle of sqliteInt.h ******************/ -/************** Begin file hash.h ********************************************/ + /* -** 2001 September 22 +** Include the configuration header output by 'configure' if we're using the +** autoconf-based build +*/ +#ifdef _HAVE_SQLITE_CONFIG_H +#include "config.h" +#endif + +/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ +/************** Begin file sqliteLimit.h *************************************/ +/* +** 2007 May 7 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -7288,847 +7690,474 @@ struct sqlite3_rtree_geometry { ** May you share freely, never taking more than you give. ** ************************************************************************* -** This is the header file for the generic hash-table implemenation -** used in SQLite. -*/ -#ifndef _SQLITE_HASH_H_ -#define _SQLITE_HASH_H_ - -/* Forward declarations of structures. */ -typedef struct Hash Hash; -typedef struct HashElem HashElem; - -/* A complete hash table is an instance of the following structure. -** The internals of this structure are intended to be opaque -- client -** code should not attempt to access or modify the fields of this structure -** directly. Change this structure only by using the routines below. -** However, some of the "procedures" and "functions" for modifying and -** accessing this structure are really macros, so we can't really make -** this structure opaque. -** -** All elements of the hash table are on a single doubly-linked list. -** Hash.first points to the head of this list. -** -** There are Hash.htsize buckets. Each bucket points to a spot in -** the global doubly-linked list. The contents of the bucket are the -** element pointed to plus the next _ht.count-1 elements in the list. -** -** Hash.htsize and Hash.ht may be zero. In that case lookup is done -** by a linear search of the global list. For small tables, the -** Hash.ht table is never allocated because if there are few elements -** in the table, it is faster to do a linear search than to manage -** the hash table. +** +** This file defines various limits of what SQLite can process. */ -struct Hash { - unsigned int htsize; /* Number of buckets in the hash table */ - unsigned int count; /* Number of entries in this table */ - HashElem *first; /* The first element of the array */ - struct _ht { /* the hash table */ - int count; /* Number of entries with this hash */ - HashElem *chain; /* Pointer to first entry with this hash */ - } *ht; -}; -/* Each element in the hash table is an instance of the following -** structure. All elements are stored on a single doubly-linked list. +/* +** The maximum length of a TEXT or BLOB in bytes. This also +** limits the size of a row in a table or index. ** -** Again, this structure is intended to be opaque, but it can't really -** be opaque because it is used by macros. +** The hard limit is the ability of a 32-bit signed integer +** to count the size: 2^31-1 or 2147483647. */ -struct HashElem { - HashElem *next, *prev; /* Next and previous elements in the table */ - void *data; /* Data associated with this element */ - const char *pKey; int nKey; /* Key associated with this element */ -}; +#ifndef SQLITE_MAX_LENGTH +# define SQLITE_MAX_LENGTH 1000000000 +#endif /* -** Access routines. To delete, insert a NULL pointer. +** This is the maximum number of +** +** * Columns in a table +** * Columns in an index +** * Columns in a view +** * Terms in the SET clause of an UPDATE statement +** * Terms in the result set of a SELECT statement +** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement. +** * Terms in the VALUES clause of an INSERT statement +** +** The hard upper limit here is 32676. Most database people will +** tell you that in a well-normalized database, you usually should +** not have more than a dozen or so columns in any table. And if +** that is the case, there is no point in having more than a few +** dozen values in any of the other situations described above. */ -SQLITE_PRIVATE void sqlite3HashInit(Hash*); -SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, int nKey, void *pData); -SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey, int nKey); -SQLITE_PRIVATE void sqlite3HashClear(Hash*); +#ifndef SQLITE_MAX_COLUMN +# define SQLITE_MAX_COLUMN 2000 +#endif /* -** Macros for looping over all elements of a hash table. The idiom is -** like this: +** The maximum length of a single SQL statement in bytes. ** -** Hash h; -** HashElem *p; -** ... -** for(p=sqliteHashFirst(&h); p; p=sqliteHashNext(p)){ -** SomeStructure *pData = sqliteHashData(p); -** // do something with pData -** } +** It used to be the case that setting this value to zero would +** turn the limit off. That is no longer true. It is not possible +** to turn this limit off. */ -#define sqliteHashFirst(H) ((H)->first) -#define sqliteHashNext(E) ((E)->next) -#define sqliteHashData(E) ((E)->data) -/* #define sqliteHashKey(E) ((E)->pKey) // NOT USED */ -/* #define sqliteHashKeysize(E) ((E)->nKey) // NOT USED */ +#ifndef SQLITE_MAX_SQL_LENGTH +# define SQLITE_MAX_SQL_LENGTH 1000000000 +#endif /* -** Number of entries in a hash table +** The maximum depth of an expression tree. This is limited to +** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might +** want to place more severe limits on the complexity of an +** expression. +** +** A value of 0 used to mean that the limit was not enforced. +** But that is no longer true. The limit is now strictly enforced +** at all times. */ -/* #define sqliteHashCount(H) ((H)->count) // NOT USED */ - -#endif /* _SQLITE_HASH_H_ */ - -/************** End of hash.h ************************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include parse.h in the middle of sqliteInt.h *****************/ -/************** Begin file parse.h *******************************************/ -#define TK_SEMI 1 -#define TK_EXPLAIN 2 -#define TK_QUERY 3 -#define TK_PLAN 4 -#define TK_BEGIN 5 -#define TK_TRANSACTION 6 -#define TK_DEFERRED 7 -#define TK_IMMEDIATE 8 -#define TK_EXCLUSIVE 9 -#define TK_COMMIT 10 -#define TK_END 11 -#define TK_ROLLBACK 12 -#define TK_SAVEPOINT 13 -#define TK_RELEASE 14 -#define TK_TO 15 -#define TK_TABLE 16 -#define TK_CREATE 17 -#define TK_IF 18 -#define TK_NOT 19 -#define TK_EXISTS 20 -#define TK_TEMP 21 -#define TK_LP 22 -#define TK_RP 23 -#define TK_AS 24 -#define TK_COMMA 25 -#define TK_ID 26 -#define TK_INDEXED 27 -#define TK_ABORT 28 -#define TK_ACTION 29 -#define TK_AFTER 30 -#define TK_ANALYZE 31 -#define TK_ASC 32 -#define TK_ATTACH 33 -#define TK_BEFORE 34 -#define TK_BY 35 -#define TK_CASCADE 36 -#define TK_CAST 37 -#define TK_COLUMNKW 38 -#define TK_CONFLICT 39 -#define TK_DATABASE 40 -#define TK_DESC 41 -#define TK_DETACH 42 -#define TK_EACH 43 -#define TK_FAIL 44 -#define TK_FOR 45 -#define TK_IGNORE 46 -#define TK_INITIALLY 47 -#define TK_INSTEAD 48 -#define TK_LIKE_KW 49 -#define TK_MATCH 50 -#define TK_NO 51 -#define TK_KEY 52 -#define TK_OF 53 -#define TK_OFFSET 54 -#define TK_PRAGMA 55 -#define TK_RAISE 56 -#define TK_REPLACE 57 -#define TK_RESTRICT 58 -#define TK_ROW 59 -#define TK_TRIGGER 60 -#define TK_VACUUM 61 -#define TK_VIEW 62 -#define TK_VIRTUAL 63 -#define TK_REINDEX 64 -#define TK_RENAME 65 -#define TK_CTIME_KW 66 -#define TK_ANY 67 -#define TK_OR 68 -#define TK_AND 69 -#define TK_IS 70 -#define TK_BETWEEN 71 -#define TK_IN 72 -#define TK_ISNULL 73 -#define TK_NOTNULL 74 -#define TK_NE 75 -#define TK_EQ 76 -#define TK_GT 77 -#define TK_LE 78 -#define TK_LT 79 -#define TK_GE 80 -#define TK_ESCAPE 81 -#define TK_BITAND 82 -#define TK_BITOR 83 -#define TK_LSHIFT 84 -#define TK_RSHIFT 85 -#define TK_PLUS 86 -#define TK_MINUS 87 -#define TK_STAR 88 -#define TK_SLASH 89 -#define TK_REM 90 -#define TK_CONCAT 91 -#define TK_COLLATE 92 -#define TK_BITNOT 93 -#define TK_STRING 94 -#define TK_JOIN_KW 95 -#define TK_CONSTRAINT 96 -#define TK_DEFAULT 97 -#define TK_NULL 98 -#define TK_PRIMARY 99 -#define TK_UNIQUE 100 -#define TK_CHECK 101 -#define TK_REFERENCES 102 -#define TK_AUTOINCR 103 -#define TK_ON 104 -#define TK_INSERT 105 -#define TK_DELETE 106 -#define TK_UPDATE 107 -#define TK_SET 108 -#define TK_DEFERRABLE 109 -#define TK_FOREIGN 110 -#define TK_DROP 111 -#define TK_UNION 112 -#define TK_ALL 113 -#define TK_EXCEPT 114 -#define TK_INTERSECT 115 -#define TK_SELECT 116 -#define TK_DISTINCT 117 -#define TK_DOT 118 -#define TK_FROM 119 -#define TK_JOIN 120 -#define TK_USING 121 -#define TK_ORDER 122 -#define TK_GROUP 123 -#define TK_HAVING 124 -#define TK_LIMIT 125 -#define TK_WHERE 126 -#define TK_INTO 127 -#define TK_VALUES 128 -#define TK_INTEGER 129 -#define TK_FLOAT 130 -#define TK_BLOB 131 -#define TK_REGISTER 132 -#define TK_VARIABLE 133 -#define TK_CASE 134 -#define TK_WHEN 135 -#define TK_THEN 136 -#define TK_ELSE 137 -#define TK_INDEX 138 -#define TK_ALTER 139 -#define TK_ADD 140 -#define TK_TO_TEXT 141 -#define TK_TO_BLOB 142 -#define TK_TO_NUMERIC 143 -#define TK_TO_INT 144 -#define TK_TO_REAL 145 -#define TK_ISNOT 146 -#define TK_END_OF_FILE 147 -#define TK_ILLEGAL 148 -#define TK_SPACE 149 -#define TK_UNCLOSED_STRING 150 -#define TK_FUNCTION 151 -#define TK_COLUMN 152 -#define TK_AGG_FUNCTION 153 -#define TK_AGG_COLUMN 154 -#define TK_CONST_FUNC 155 -#define TK_UMINUS 156 -#define TK_UPLUS 157 - -/************** End of parse.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -#include -#include -#include -#include -#include +#ifndef SQLITE_MAX_EXPR_DEPTH +# define SQLITE_MAX_EXPR_DEPTH 1000 +#endif /* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point +** The maximum number of terms in a compound SELECT statement. +** The code generator for compound SELECT statements does one +** level of recursion for each term. A stack overflow can result +** if the number of terms is too large. In practice, most SQL +** never has more than 3 or 4 terms. Use a value of 0 to disable +** any limit on the number of terms in a compount SELECT. */ -#ifdef SQLITE_OMIT_FLOATING_POINT -# define double sqlite_int64 -# define float sqlite_int64 -# define LONGDOUBLE_TYPE sqlite_int64 -# ifndef SQLITE_BIG_DBL -# define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50) -# endif -# define SQLITE_OMIT_DATETIME_FUNCS 1 -# define SQLITE_OMIT_TRACE 1 -# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT -# undef SQLITE_HAVE_ISNAN -#endif -#ifndef SQLITE_BIG_DBL -# define SQLITE_BIG_DBL (1e99) +#ifndef SQLITE_MAX_COMPOUND_SELECT +# define SQLITE_MAX_COMPOUND_SELECT 500 #endif /* -** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 -** afterward. Having this macro allows us to cause the C compiler -** to omit code used by TEMP tables without messy #ifndef statements. +** The maximum number of opcodes in a VDBE program. +** Not currently enforced. */ -#ifdef SQLITE_OMIT_TEMPDB -#define OMIT_TEMPDB 1 -#else -#define OMIT_TEMPDB 0 +#ifndef SQLITE_MAX_VDBE_OP +# define SQLITE_MAX_VDBE_OP 25000 #endif /* -** The "file format" number is an integer that is incremented whenever -** the VDBE-level file format changes. The following macros define the -** the default file format for new databases and the maximum file format -** that the library can read. +** The maximum number of arguments to an SQL function. */ -#define SQLITE_MAX_FILE_FORMAT 4 -#ifndef SQLITE_DEFAULT_FILE_FORMAT -# define SQLITE_DEFAULT_FILE_FORMAT 1 +#ifndef SQLITE_MAX_FUNCTION_ARG +# define SQLITE_MAX_FUNCTION_ARG 127 #endif /* -** Determine whether triggers are recursive by default. This can be -** changed at run-time using a pragma. +** The maximum number of in-memory pages to use for the main database +** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE */ -#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS -# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0 +#ifndef SQLITE_DEFAULT_CACHE_SIZE +# define SQLITE_DEFAULT_CACHE_SIZE 2000 +#endif +#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE +# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500 #endif /* -** Provide a default value for SQLITE_TEMP_STORE in case it is not specified -** on the command-line +** The default number of frames to accumulate in the log file before +** checkpointing the database in WAL mode. */ -#ifndef SQLITE_TEMP_STORE -# define SQLITE_TEMP_STORE 1 +#ifndef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT +# define SQLITE_DEFAULT_WAL_AUTOCHECKPOINT 1000 #endif /* -** GCC does not define the offsetof() macro so we'll have to do it -** ourselves. +** The maximum number of attached databases. This must be between 0 +** and 62. The upper bound on 62 is because a 64-bit integer bitmap +** is used internally to track attached databases. */ -#ifndef offsetof -#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) +#ifndef SQLITE_MAX_ATTACHED +# define SQLITE_MAX_ATTACHED 10 #endif + /* -** Check to see if this machine uses EBCDIC. (Yes, believe it or -** not, there are still machines out there that use EBCDIC.) +** The maximum value of a ?nnn wildcard that the parser will accept. */ -#if 'A' == '\301' -# define SQLITE_EBCDIC 1 -#else -# define SQLITE_ASCII 1 +#ifndef SQLITE_MAX_VARIABLE_NUMBER +# define SQLITE_MAX_VARIABLE_NUMBER 999 #endif -/* -** Integers of known sizes. These typedefs might change for architectures -** where the sizes very. Preprocessor macros are available so that the -** types can be conveniently redefined at compile-type. Like this: +/* Maximum page size. The upper bound on this value is 65536. This a limit +** imposed by the use of 16-bit offsets within each page. ** -** cc '-DUINTPTR_TYPE=long long int' ... +** Earlier versions of SQLite allowed the user to change this value at +** compile time. This is no longer permitted, on the grounds that it creates +** a library that is technically incompatible with an SQLite library +** compiled with a different limit. If a process operating on a database +** with a page-size of 65536 bytes crashes, then an instance of SQLite +** compiled with the default page-size limit will not be able to rollback +** the aborted transaction. This could lead to database corruption. */ -#ifndef UINT32_TYPE -# ifdef HAVE_UINT32_T -# define UINT32_TYPE uint32_t -# else -# define UINT32_TYPE unsigned int -# endif -#endif -#ifndef UINT16_TYPE -# ifdef HAVE_UINT16_T -# define UINT16_TYPE uint16_t -# else -# define UINT16_TYPE unsigned short int -# endif -#endif -#ifndef INT16_TYPE -# ifdef HAVE_INT16_T -# define INT16_TYPE int16_t -# else -# define INT16_TYPE short int -# endif -#endif -#ifndef UINT8_TYPE -# ifdef HAVE_UINT8_T -# define UINT8_TYPE uint8_t -# else -# define UINT8_TYPE unsigned char -# endif -#endif -#ifndef INT8_TYPE -# ifdef HAVE_INT8_T -# define INT8_TYPE int8_t -# else -# define INT8_TYPE signed char -# endif -#endif -#ifndef LONGDOUBLE_TYPE -# define LONGDOUBLE_TYPE long double +#ifdef SQLITE_MAX_PAGE_SIZE +# undef SQLITE_MAX_PAGE_SIZE #endif -typedef sqlite_int64 i64; /* 8-byte signed integer */ -typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ -typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ -typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ -typedef INT16_TYPE i16; /* 2-byte signed integer */ -typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ -typedef INT8_TYPE i8; /* 1-byte signed integer */ +#define SQLITE_MAX_PAGE_SIZE 65536 -/* -** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value -** that can be stored in a u32 without loss of data. The value -** is 0x00000000ffffffff. But because of quirks of some compilers, we -** have to specify the value in the less intuitive manner shown: -*/ -#define SQLITE_MAX_U32 ((((u64)1)<<32)-1) /* -** Macros to determine whether the machine is big or little endian, -** evaluated at runtime. +** The default size of a database page. */ -#ifdef SQLITE_AMALGAMATION -SQLITE_PRIVATE const int sqlite3one = 1; -#else -SQLITE_PRIVATE const int sqlite3one; +#ifndef SQLITE_DEFAULT_PAGE_SIZE +# define SQLITE_DEFAULT_PAGE_SIZE 1024 #endif -#if defined(i386) || defined(__i386__) || defined(_M_IX86)\ - || defined(__x86_64) || defined(__x86_64__) -# define SQLITE_BIGENDIAN 0 -# define SQLITE_LITTLEENDIAN 1 -# define SQLITE_UTF16NATIVE SQLITE_UTF16LE -#else -# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) -# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) -# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) +#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE +# undef SQLITE_DEFAULT_PAGE_SIZE +# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE #endif /* -** Constants for the largest and smallest possible 64-bit signed integers. -** These macros are designed to work correctly on both 32-bit and 64-bit -** compilers. +** Ordinarily, if no value is explicitly provided, SQLite creates databases +** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain +** device characteristics (sector-size and atomic write() support), +** SQLite may choose a larger value. This constant is the maximum value +** SQLite will choose on its own. */ -#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32)) -#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64) +#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE +# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192 +#endif +#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE +# undef SQLITE_MAX_DEFAULT_PAGE_SIZE +# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE +#endif -/* -** Round up a number to the next larger multiple of 8. This is used -** to force 8-byte alignment on 64-bit architectures. -*/ -#define ROUND8(x) (((x)+7)&~7) /* -** Round down to the nearest multiple of 8 +** Maximum number of pages in one database file. +** +** This is really just the default value for the max_page_count pragma. +** This value can be lowered (or raised) at run-time using that the +** max_page_count macro. */ -#define ROUNDDOWN8(x) ((x)&~7) +#ifndef SQLITE_MAX_PAGE_COUNT +# define SQLITE_MAX_PAGE_COUNT 1073741823 +#endif /* -** Assert that the pointer X is aligned to an 8-byte boundary. This -** macro is used only within assert() to verify that the code gets -** all alignment restrictions correct. -** -** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the -** underlying malloc() implemention might return us 4-byte aligned -** pointers. In that case, only verify 4-byte alignment. +** Maximum length (in bytes) of the pattern in a LIKE or GLOB +** operator. */ -#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC -# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0) -#else -# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0) +#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH +# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000 #endif - /* -** An instance of the following structure is used to store the busy-handler -** callback for a given sqlite handle. +** Maximum depth of recursion for triggers. ** -** The sqlite.busyHandler member of the sqlite struct contains the busy -** callback for the database handle. Each pager opened via the sqlite -** handle is passed a pointer to sqlite.busyHandler. The busy-handler -** callback is currently invoked only from within pager.c. -*/ -typedef struct BusyHandler BusyHandler; -struct BusyHandler { - int (*xFunc)(void *,int); /* The busy callback */ - void *pArg; /* First arg to busy callback */ - int nBusy; /* Incremented with each busy call */ -}; - -/* -** Name of the master database table. The master database table -** is a special table that holds the names and attributes of all -** user tables and indices. +** A value of 1 means that a trigger program will not be able to itself +** fire any triggers. A value of 0 means that no trigger programs at all +** may be executed. */ -#define MASTER_NAME "sqlite_master" -#define TEMP_MASTER_NAME "sqlite_temp_master" +#ifndef SQLITE_MAX_TRIGGER_DEPTH +# define SQLITE_MAX_TRIGGER_DEPTH 1000 +#endif -/* -** The root-page of the master database table. -*/ -#define MASTER_ROOT 1 +/************** End of sqliteLimit.h *****************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ -/* -** The name of the schema table. -*/ -#define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) +/* Disable nuisance warnings on Borland compilers */ +#if defined(__BORLANDC__) +#pragma warn -rch /* unreachable code */ +#pragma warn -ccc /* Condition is always true or false */ +#pragma warn -aus /* Assigned value is never used */ +#pragma warn -csu /* Comparing signed and unsigned */ +#pragma warn -spa /* Suspicious pointer arithmetic */ +#endif /* -** A convenience macro that returns the number of elements in -** an array. +** Include standard header files as necessary */ -#define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0]))) +#ifdef HAVE_STDINT_H +#include +#endif +#ifdef HAVE_INTTYPES_H +#include +#endif /* -** The following value as a destructor means to use sqlite3DbFree(). -** This is an internal extension to SQLITE_STATIC and SQLITE_TRANSIENT. +** The following macros are used to cast pointers to integers and +** integers to pointers. The way you do this varies from one compiler +** to the next, so we have developed the following set of #if statements +** to generate appropriate macros for a wide range of compilers. +** +** The correct "ANSI" way to do this is to use the intptr_t type. +** Unfortunately, that typedef is not available on all compilers, or +** if it is available, it requires an #include of specific headers +** that vary from one machine to the next. +** +** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on +** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). +** So we have to define the macros in different ways depending on the +** compiler. */ -#define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3DbFree) +#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ +# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) +#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ +# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) +# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) +#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ +# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) +#else /* Generates a warning - but it always works */ +# define SQLITE_INT_TO_PTR(X) ((void*)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(X)) +#endif /* -** When SQLITE_OMIT_WSD is defined, it means that the target platform does -** not support Writable Static Data (WSD) such as global and static variables. -** All variables must either be on the stack or dynamically allocated from -** the heap. When WSD is unsupported, the variable declarations scattered -** throughout the SQLite code must become constants instead. The SQLITE_WSD -** macro is used for this purpose. And instead of referencing the variable -** directly, we use its constant as a key to lookup the run-time allocated -** buffer that holds real variable. The constant is also the initializer -** for the run-time allocated buffer. -** -** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL -** macros become no-ops and have zero performance impact. +** A macro to hint to the compiler that a function should not be +** inlined. */ -#ifdef SQLITE_OMIT_WSD - #define SQLITE_WSD const - #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v))) - #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config) -SQLITE_API int sqlite3_wsd_init(int N, int J); -SQLITE_API void *sqlite3_wsd_find(void *K, int L); +#if defined(__GNUC__) +# define SQLITE_NOINLINE __attribute__((noinline)) +#elif defined(_MSC_VER) && _MSC_VER>=1310 +# define SQLITE_NOINLINE __declspec(noinline) #else - #define SQLITE_WSD - #define GLOBAL(t,v) v - #define sqlite3GlobalConfig sqlite3Config +# define SQLITE_NOINLINE #endif /* -** The following macros are used to suppress compiler warnings and to -** make it clear to human readers when a function parameter is deliberately -** left unused within the body of a function. This usually happens when -** a function is called via a function pointer. For example the -** implementation of an SQL aggregate step callback may not use the -** parameter indicating the number of arguments passed to the aggregate, -** if it knows that this is enforced elsewhere. +** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. +** 0 means mutexes are permanently disable and the library is never +** threadsafe. 1 means the library is serialized which is the highest +** level of threadsafety. 2 means the library is multithreaded - multiple +** threads can use SQLite as long as no two threads try to use the same +** database connection at the same time. ** -** When a function parameter is not used at all within the body of a function, -** it is generally named "NotUsed" or "NotUsed2" to make things even clearer. -** However, these macros may also be used to suppress warnings related to -** parameters that may or may not be used depending on compilation options. -** For example those parameters only used in assert() statements. In these -** cases the parameters are named as per the usual conventions. +** Older versions of SQLite used an optional THREADSAFE macro. +** We support that for legacy. */ -#define UNUSED_PARAMETER(x) (void)(x) -#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y) +#if !defined(SQLITE_THREADSAFE) +# if defined(THREADSAFE) +# define SQLITE_THREADSAFE THREADSAFE +# else +# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ +# endif +#endif /* -** Forward references to structures +** Powersafe overwrite is on by default. But can be turned off using +** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option. */ -typedef struct AggInfo AggInfo; -typedef struct AuthContext AuthContext; -typedef struct AutoincInfo AutoincInfo; -typedef struct Bitvec Bitvec; -typedef struct CollSeq CollSeq; -typedef struct Column Column; -typedef struct Db Db; -typedef struct Schema Schema; -typedef struct Expr Expr; -typedef struct ExprList ExprList; -typedef struct ExprSpan ExprSpan; -typedef struct FKey FKey; -typedef struct FuncDestructor FuncDestructor; -typedef struct FuncDef FuncDef; -typedef struct FuncDefHash FuncDefHash; -typedef struct IdList IdList; -typedef struct Index Index; -typedef struct IndexSample IndexSample; -typedef struct KeyClass KeyClass; -typedef struct KeyInfo KeyInfo; -typedef struct Lookaside Lookaside; -typedef struct LookasideSlot LookasideSlot; -typedef struct Module Module; -typedef struct NameContext NameContext; -typedef struct Parse Parse; -typedef struct RowSet RowSet; -typedef struct Savepoint Savepoint; -typedef struct Select Select; -typedef struct SrcList SrcList; -typedef struct StrAccum StrAccum; -typedef struct Table Table; -typedef struct TableLock TableLock; -typedef struct Token Token; -typedef struct Trigger Trigger; -typedef struct TriggerPrg TriggerPrg; -typedef struct TriggerStep TriggerStep; -typedef struct UnpackedRecord UnpackedRecord; -typedef struct VTable VTable; -typedef struct VtabCtx VtabCtx; -typedef struct Walker Walker; -typedef struct WherePlan WherePlan; -typedef struct WhereInfo WhereInfo; -typedef struct WhereLevel WhereLevel; +#ifndef SQLITE_POWERSAFE_OVERWRITE +# define SQLITE_POWERSAFE_OVERWRITE 1 +#endif /* -** Defer sourcing vdbe.h and btree.h until after the "u8" and -** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque -** pointer types (i.e. FuncDef) defined above. +** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. +** It determines whether or not the features related to +** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can +** be overridden at runtime using the sqlite3_config() API. */ -/************** Include btree.h in the middle of sqliteInt.h *****************/ -/************** Begin file btree.h *******************************************/ +#if !defined(SQLITE_DEFAULT_MEMSTATUS) +# define SQLITE_DEFAULT_MEMSTATUS 1 +#endif + /* -** 2001 September 15 +** Exactly one of the following macros must be defined in order to +** specify which memory allocation subsystem to use. ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** SQLITE_SYSTEM_MALLOC // Use normal system malloc() +** SQLITE_WIN32_MALLOC // Use Win32 native heap API +** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails +** SQLITE_MEMDEBUG // Debugging version of system malloc() ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the +** assert() macro is enabled, each call into the Win32 native heap subsystem +** will cause HeapValidate to be called. If heap validation should fail, an +** assertion will be triggered. ** -************************************************************************* -** This header file defines the interface that the sqlite B-Tree file -** subsystem. See comments in the source code for a detailed description -** of what each interface routine does. -*/ -#ifndef _BTREE_H_ -#define _BTREE_H_ - -/* TODO: This definition is just included so other modules compile. It -** needs to be revisited. +** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as +** the default. */ -#define SQLITE_N_BTREE_META 10 +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)>1 +# error "Two or more of the following compile-time configuration options\ + are defined but at most one is allowed:\ + SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\ + SQLITE_ZERO_MALLOC" +#endif +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)==0 +# define SQLITE_SYSTEM_MALLOC 1 +#endif /* -** If defined as non-zero, auto-vacuum is enabled by default. Otherwise -** it must be turned on for each database using "PRAGMA auto_vacuum = 1". +** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the +** sizes of memory allocations below this value where possible. */ -#ifndef SQLITE_DEFAULT_AUTOVACUUM - #define SQLITE_DEFAULT_AUTOVACUUM 0 +#if !defined(SQLITE_MALLOC_SOFT_LIMIT) +# define SQLITE_MALLOC_SOFT_LIMIT 1024 #endif -#define BTREE_AUTOVACUUM_NONE 0 /* Do not do auto-vacuum */ -#define BTREE_AUTOVACUUM_FULL 1 /* Do full auto-vacuum */ -#define BTREE_AUTOVACUUM_INCR 2 /* Incremental vacuum */ - /* -** Forward declarations of structure -*/ -typedef struct Btree Btree; -typedef struct BtCursor BtCursor; -typedef struct BtShared BtShared; - - -SQLITE_PRIVATE int sqlite3BtreeOpen( - sqlite3_vfs *pVfs, /* VFS to use with this b-tree */ - const char *zFilename, /* Name of database file to open */ - sqlite3 *db, /* Associated database connection */ - Btree **ppBtree, /* Return open Btree* here */ - int flags, /* Flags */ - int vfsFlags /* Flags passed through to VFS open */ -); - -/* The flags parameter to sqlite3BtreeOpen can be the bitwise or of the -** following values. -** -** NOTE: These values must match the corresponding PAGER_ values in -** pager.h. -*/ -#define BTREE_OMIT_JOURNAL 1 /* Do not create or use a rollback journal */ -#define BTREE_NO_READLOCK 2 /* Omit readlocks on readonly files */ -#define BTREE_MEMORY 4 /* This is an in-memory DB */ -#define BTREE_SINGLE 8 /* The file contains at most 1 b-tree */ -#define BTREE_UNORDERED 16 /* Use of a hash implementation is OK */ - -SQLITE_PRIVATE int sqlite3BtreeClose(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeSetSafetyLevel(Btree*,int,int,int); -SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix); -SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*); -SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int); -SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeGetReserve(Btree*); -SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int); -SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *); -SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster); -SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int); -SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*); -SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*); -SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags); -SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*); -SQLITE_PRIVATE int sqlite3BtreeIsInReadTrans(Btree*); -SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*); -SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *)); -SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree); -SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock); -SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int); - -SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *); -SQLITE_PRIVATE const char *sqlite3BtreeGetJournalname(Btree *); -SQLITE_PRIVATE int sqlite3BtreeCopyFile(Btree *, Btree *); - -SQLITE_PRIVATE int sqlite3BtreeIncrVacuum(Btree *); - -/* The flags parameter to sqlite3BtreeCreateTable can be the bitwise OR -** of the flags shown below. -** -** Every SQLite table must have either BTREE_INTKEY or BTREE_BLOBKEY set. -** With BTREE_INTKEY, the table key is a 64-bit integer and arbitrary data -** is stored in the leaves. (BTREE_INTKEY is used for SQL tables.) With -** BTREE_BLOBKEY, the key is an arbitrary BLOB and no content is stored -** anywhere - the key is the content. (BTREE_BLOBKEY is used for SQL -** indices.) +** We need to define _XOPEN_SOURCE as follows in order to enable +** recursive mutexes on most Unix systems and fchmod() on OpenBSD. +** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit +** it. */ -#define BTREE_INTKEY 1 /* Table has only 64-bit signed integer keys */ -#define BTREE_BLOBKEY 2 /* Table has keys only - no data */ - -SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*); -SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*); -SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int); - -SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue); -SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value); +#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) +# define _XOPEN_SOURCE 600 +#endif /* -** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta -** should be one of the following values. The integer values are assigned -** to constants so that the offset of the corresponding field in an -** SQLite database header may be found using the following formula: -** -** offset = 36 + (idx * 4) +** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that +** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true, +** make it true by defining or undefining NDEBUG. ** -** For example, the free-page-count field is located at byte offset 36 of -** the database file header. The incr-vacuum-flag field is located at -** byte offset 64 (== 36+4*7). +** Setting NDEBUG makes the code smaller and faster by disabling the +** assert() statements in the code. So we want the default action +** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG +** is set. Thus NDEBUG becomes an opt-in rather than an opt-out +** feature. */ -#define BTREE_FREE_PAGE_COUNT 0 -#define BTREE_SCHEMA_VERSION 1 -#define BTREE_FILE_FORMAT 2 -#define BTREE_DEFAULT_CACHE_SIZE 3 -#define BTREE_LARGEST_ROOT_PAGE 4 -#define BTREE_TEXT_ENCODING 5 -#define BTREE_USER_VERSION 6 -#define BTREE_INCR_VACUUM 7 - -SQLITE_PRIVATE int sqlite3BtreeCursor( - Btree*, /* BTree containing table to open */ - int iTable, /* Index of root page */ - int wrFlag, /* 1 for writing. 0 for read-only */ - struct KeyInfo*, /* First argument to compare function */ - BtCursor *pCursor /* Space to write cursor structure */ -); -SQLITE_PRIVATE int sqlite3BtreeCursorSize(void); -SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*); - -SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( - BtCursor*, - UnpackedRecord *pUnKey, - i64 intKey, - int bias, - int *pRes -); -SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*, int*); -SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey, - const void *pData, int nData, - int nZero, int bias, int seekResult); -SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize); -SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, int *pAmt); -SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, int *pAmt); -SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize); -SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeSetCachedRowid(BtCursor*, sqlite3_int64); -SQLITE_PRIVATE sqlite3_int64 sqlite3BtreeGetCachedRowid(BtCursor*); - -SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); -SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); - -SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *); -SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *); - -SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion); - -#ifndef NDEBUG -SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*); +#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) +# define NDEBUG 1 #endif - -#ifndef SQLITE_OMIT_BTREECOUNT -SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *); +#if defined(NDEBUG) && defined(SQLITE_DEBUG) +# undef NDEBUG #endif -#ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3BtreeCursorInfo(BtCursor*, int*, int); -SQLITE_PRIVATE void sqlite3BtreeCursorList(Btree*); +/* +** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on. +*/ +#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG) +# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1 #endif -#ifndef SQLITE_OMIT_WAL -SQLITE_PRIVATE int sqlite3BtreeCheckpoint(Btree*, int, int *, int *); +/* +** The testcase() macro is used to aid in coverage testing. When +** doing coverage testing, the condition inside the argument to +** testcase() must be evaluated both true and false in order to +** get full branch coverage. The testcase() macro is inserted +** to help ensure adequate test coverage in places where simple +** condition/decision coverage is inadequate. For example, testcase() +** can be used to make sure boundary values are tested. For +** bitmask tests, testcase() can be used to make sure each bit +** is significant and used at least once. On switch statements +** where multiple cases go to the same block of code, testcase() +** can insure that all cases are evaluated. +** +*/ +#ifdef SQLITE_COVERAGE_TEST +SQLITE_PRIVATE void sqlite3Coverage(int); +# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } +#else +# define testcase(X) #endif /* -** If we are not using shared cache, then there is no need to -** use mutexes to access the BtShared structures. So make the -** Enter and Leave procedures no-ops. +** The TESTONLY macro is used to enclose variable declarations or +** other bits of code that are needed to support the arguments +** within testcase() and assert() macros. */ -#ifndef SQLITE_OMIT_SHARED_CACHE -SQLITE_PRIVATE void sqlite3BtreeEnter(Btree*); -SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*); +#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) +# define TESTONLY(X) X #else -# define sqlite3BtreeEnter(X) -# define sqlite3BtreeEnterAll(X) +# define TESTONLY(X) #endif -#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE -SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*); -SQLITE_PRIVATE void sqlite3BtreeLeave(Btree*); -SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*); -SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor*); -SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3*); +/* +** Sometimes we need a small amount of code such as a variable initialization +** to setup for a later assert() statement. We do not want this code to +** appear when assert() is disabled. The following macro is therefore +** used to contain that setup code. The "VVA" acronym stands for +** "Verification, Validation, and Accreditation". In other words, the +** code within VVA_ONLY() will only run during verification processes. +*/ #ifndef NDEBUG - /* These routines are used inside assert() statements only. */ -SQLITE_PRIVATE int sqlite3BtreeHoldsMutex(Btree*); -SQLITE_PRIVATE int sqlite3BtreeHoldsAllMutexes(sqlite3*); -SQLITE_PRIVATE int sqlite3SchemaMutexHeld(sqlite3*,int,Schema*); -#endif +# define VVA_ONLY(X) X #else +# define VVA_ONLY(X) +#endif -# define sqlite3BtreeSharable(X) 0 -# define sqlite3BtreeLeave(X) -# define sqlite3BtreeEnterCursor(X) -# define sqlite3BtreeLeaveCursor(X) -# define sqlite3BtreeLeaveAll(X) - -# define sqlite3BtreeHoldsMutex(X) 1 -# define sqlite3BtreeHoldsAllMutexes(X) 1 -# define sqlite3SchemaMutexHeld(X,Y,Z) 1 +/* +** The ALWAYS and NEVER macros surround boolean expressions which +** are intended to always be true or false, respectively. Such +** expressions could be omitted from the code completely. But they +** are included in a few cases in order to enhance the resilience +** of SQLite to unexpected behavior - to make the code "self-healing" +** or "ductile" rather than being "brittle" and crashing at the first +** hint of unplanned behavior. +** +** In other words, ALWAYS and NEVER are added for defensive code. +** +** When doing coverage testing ALWAYS and NEVER are hard-coded to +** be true and false so that the unreachable code they specify will +** not be counted as untested code. +*/ +#if defined(SQLITE_COVERAGE_TEST) +# define ALWAYS(X) (1) +# define NEVER(X) (0) +#elif !defined(NDEBUG) +# define ALWAYS(X) ((X)?1:(assert(0),0)) +# define NEVER(X) ((X)?(assert(0),1):0) +#else +# define ALWAYS(X) (X) +# define NEVER(X) (X) #endif +/* +** Return true (non-zero) if the input is an integer that is too large +** to fit in 32-bits. This macro is used inside of various testcase() +** macros to verify that we have tested SQLite for large-file support. +*/ +#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) -#endif /* _BTREE_H_ */ +/* +** The macro unlikely() is a hint that surrounds a boolean +** expression that is usually false. Macro likely() surrounds +** a boolean expression that is usually true. These hints could, +** in theory, be used by the compiler to generate better code, but +** currently they are just comments for human readers. +*/ +#define likely(X) (X) +#define unlikely(X) (X) -/************** End of btree.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include vdbe.h in the middle of sqliteInt.h ******************/ -/************** Begin file vdbe.h ********************************************/ +/************** Include hash.h in the middle of sqliteInt.h ******************/ +/************** Begin file hash.h ********************************************/ /* -** 2001 September 15 +** 2001 September 22 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -8138,605 +8167,769 @@ SQLITE_PRIVATE int sqlite3SchemaMutexHeld(sqlite3*,int,Schema*); ** May you share freely, never taking more than you give. ** ************************************************************************* -** Header file for the Virtual DataBase Engine (VDBE) -** -** This header defines the interface to the virtual database engine -** or VDBE. The VDBE implements an abstract machine that runs a -** simple program to access and modify the underlying database. -*/ -#ifndef _SQLITE_VDBE_H_ -#define _SQLITE_VDBE_H_ - -/* -** A single VDBE is an opaque structure named "Vdbe". Only routines -** in the source file sqliteVdbe.c are allowed to see the insides -** of this structure. +** This is the header file for the generic hash-table implementation +** used in SQLite. */ -typedef struct Vdbe Vdbe; +#ifndef _SQLITE_HASH_H_ +#define _SQLITE_HASH_H_ -/* -** The names of the following types declared in vdbeInt.h are required -** for the VdbeOp definition. -*/ -typedef struct VdbeFunc VdbeFunc; -typedef struct Mem Mem; -typedef struct SubProgram SubProgram; +/* Forward declarations of structures. */ +typedef struct Hash Hash; +typedef struct HashElem HashElem; -/* -** A single instruction of the virtual machine has an opcode -** and as many as three operands. The instruction is recorded -** as an instance of the following structure: -*/ -struct VdbeOp { - u8 opcode; /* What operation to perform */ - signed char p4type; /* One of the P4_xxx constants for p4 */ - u8 opflags; /* Mask of the OPFLG_* flags in opcodes.h */ - u8 p5; /* Fifth parameter is an unsigned character */ - int p1; /* First operand */ - int p2; /* Second parameter (often the jump destination) */ - int p3; /* The third parameter */ - union { /* fourth parameter */ - int i; /* Integer value if p4type==P4_INT32 */ - void *p; /* Generic pointer */ - char *z; /* Pointer to data for string (char array) types */ - i64 *pI64; /* Used when p4type is P4_INT64 */ - double *pReal; /* Used when p4type is P4_REAL */ - FuncDef *pFunc; /* Used when p4type is P4_FUNCDEF */ - VdbeFunc *pVdbeFunc; /* Used when p4type is P4_VDBEFUNC */ - CollSeq *pColl; /* Used when p4type is P4_COLLSEQ */ - Mem *pMem; /* Used when p4type is P4_MEM */ - VTable *pVtab; /* Used when p4type is P4_VTAB */ - KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */ - int *ai; /* Used when p4type is P4_INTARRAY */ - SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */ - } p4; -#ifdef SQLITE_DEBUG - char *zComment; /* Comment to improve readability */ -#endif -#ifdef VDBE_PROFILE - int cnt; /* Number of times this instruction was executed */ - u64 cycles; /* Total time spent executing this instruction */ -#endif +/* A complete hash table is an instance of the following structure. +** The internals of this structure are intended to be opaque -- client +** code should not attempt to access or modify the fields of this structure +** directly. Change this structure only by using the routines below. +** However, some of the "procedures" and "functions" for modifying and +** accessing this structure are really macros, so we can't really make +** this structure opaque. +** +** All elements of the hash table are on a single doubly-linked list. +** Hash.first points to the head of this list. +** +** There are Hash.htsize buckets. Each bucket points to a spot in +** the global doubly-linked list. The contents of the bucket are the +** element pointed to plus the next _ht.count-1 elements in the list. +** +** Hash.htsize and Hash.ht may be zero. In that case lookup is done +** by a linear search of the global list. For small tables, the +** Hash.ht table is never allocated because if there are few elements +** in the table, it is faster to do a linear search than to manage +** the hash table. +*/ +struct Hash { + unsigned int htsize; /* Number of buckets in the hash table */ + unsigned int count; /* Number of entries in this table */ + HashElem *first; /* The first element of the array */ + struct _ht { /* the hash table */ + int count; /* Number of entries with this hash */ + HashElem *chain; /* Pointer to first entry with this hash */ + } *ht; }; -typedef struct VdbeOp VdbeOp; - -/* -** A sub-routine used to implement a trigger program. +/* Each element in the hash table is an instance of the following +** structure. All elements are stored on a single doubly-linked list. +** +** Again, this structure is intended to be opaque, but it can't really +** be opaque because it is used by macros. */ -struct SubProgram { - VdbeOp *aOp; /* Array of opcodes for sub-program */ - int nOp; /* Elements in aOp[] */ - int nMem; /* Number of memory cells required */ - int nCsr; /* Number of cursors required */ - void *token; /* id that may be used to recursive triggers */ - SubProgram *pNext; /* Next sub-program already visited */ +struct HashElem { + HashElem *next, *prev; /* Next and previous elements in the table */ + void *data; /* Data associated with this element */ + const char *pKey; /* Key associated with this element */ }; /* -** A smaller version of VdbeOp used for the VdbeAddOpList() function because -** it takes up less space. +** Access routines. To delete, insert a NULL pointer. */ -struct VdbeOpList { - u8 opcode; /* What operation to perform */ - signed char p1; /* First operand */ - signed char p2; /* Second parameter (often the jump destination) */ - signed char p3; /* Third parameter */ -}; -typedef struct VdbeOpList VdbeOpList; +SQLITE_PRIVATE void sqlite3HashInit(Hash*); +SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, void *pData); +SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey); +SQLITE_PRIVATE void sqlite3HashClear(Hash*); /* -** Allowed values of VdbeOp.p4type +** Macros for looping over all elements of a hash table. The idiom is +** like this: +** +** Hash h; +** HashElem *p; +** ... +** for(p=sqliteHashFirst(&h); p; p=sqliteHashNext(p)){ +** SomeStructure *pData = sqliteHashData(p); +** // do something with pData +** } */ -#define P4_NOTUSED 0 /* The P4 parameter is not used */ -#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */ -#define P4_STATIC (-2) /* Pointer to a static string */ -#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */ -#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */ -#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */ -#define P4_VDBEFUNC (-7) /* P4 is a pointer to a VdbeFunc structure */ -#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */ -#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */ -#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */ -#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */ -#define P4_REAL (-12) /* P4 is a 64-bit floating point value */ -#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */ -#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */ -#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ -#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */ +#define sqliteHashFirst(H) ((H)->first) +#define sqliteHashNext(E) ((E)->next) +#define sqliteHashData(E) ((E)->data) +/* #define sqliteHashKey(E) ((E)->pKey) // NOT USED */ +/* #define sqliteHashKeysize(E) ((E)->nKey) // NOT USED */ -/* When adding a P4 argument using P4_KEYINFO, a copy of the KeyInfo structure -** is made. That copy is freed when the Vdbe is finalized. But if the -** argument is P4_KEYINFO_HANDOFF, the passed in pointer is used. It still -** gets freed when the Vdbe is finalized so it still should be obtained -** from a single sqliteMalloc(). But no copy is made and the calling -** function should *not* try to free the KeyInfo. +/* +** Number of entries in a hash table */ -#define P4_KEYINFO_HANDOFF (-16) -#define P4_KEYINFO_STATIC (-17) +/* #define sqliteHashCount(H) ((H)->count) // NOT USED */ + +#endif /* _SQLITE_HASH_H_ */ + +/************** End of hash.h ************************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ +/************** Include parse.h in the middle of sqliteInt.h *****************/ +/************** Begin file parse.h *******************************************/ +#define TK_SEMI 1 +#define TK_EXPLAIN 2 +#define TK_QUERY 3 +#define TK_PLAN 4 +#define TK_BEGIN 5 +#define TK_TRANSACTION 6 +#define TK_DEFERRED 7 +#define TK_IMMEDIATE 8 +#define TK_EXCLUSIVE 9 +#define TK_COMMIT 10 +#define TK_END 11 +#define TK_ROLLBACK 12 +#define TK_SAVEPOINT 13 +#define TK_RELEASE 14 +#define TK_TO 15 +#define TK_TABLE 16 +#define TK_CREATE 17 +#define TK_IF 18 +#define TK_NOT 19 +#define TK_EXISTS 20 +#define TK_TEMP 21 +#define TK_LP 22 +#define TK_RP 23 +#define TK_AS 24 +#define TK_WITHOUT 25 +#define TK_COMMA 26 +#define TK_ID 27 +#define TK_INDEXED 28 +#define TK_ABORT 29 +#define TK_ACTION 30 +#define TK_AFTER 31 +#define TK_ANALYZE 32 +#define TK_ASC 33 +#define TK_ATTACH 34 +#define TK_BEFORE 35 +#define TK_BY 36 +#define TK_CASCADE 37 +#define TK_CAST 38 +#define TK_COLUMNKW 39 +#define TK_CONFLICT 40 +#define TK_DATABASE 41 +#define TK_DESC 42 +#define TK_DETACH 43 +#define TK_EACH 44 +#define TK_FAIL 45 +#define TK_FOR 46 +#define TK_IGNORE 47 +#define TK_INITIALLY 48 +#define TK_INSTEAD 49 +#define TK_LIKE_KW 50 +#define TK_MATCH 51 +#define TK_NO 52 +#define TK_KEY 53 +#define TK_OF 54 +#define TK_OFFSET 55 +#define TK_PRAGMA 56 +#define TK_RAISE 57 +#define TK_RECURSIVE 58 +#define TK_REPLACE 59 +#define TK_RESTRICT 60 +#define TK_ROW 61 +#define TK_TRIGGER 62 +#define TK_VACUUM 63 +#define TK_VIEW 64 +#define TK_VIRTUAL 65 +#define TK_WITH 66 +#define TK_REINDEX 67 +#define TK_RENAME 68 +#define TK_CTIME_KW 69 +#define TK_ANY 70 +#define TK_OR 71 +#define TK_AND 72 +#define TK_IS 73 +#define TK_BETWEEN 74 +#define TK_IN 75 +#define TK_ISNULL 76 +#define TK_NOTNULL 77 +#define TK_NE 78 +#define TK_EQ 79 +#define TK_GT 80 +#define TK_LE 81 +#define TK_LT 82 +#define TK_GE 83 +#define TK_ESCAPE 84 +#define TK_BITAND 85 +#define TK_BITOR 86 +#define TK_LSHIFT 87 +#define TK_RSHIFT 88 +#define TK_PLUS 89 +#define TK_MINUS 90 +#define TK_STAR 91 +#define TK_SLASH 92 +#define TK_REM 93 +#define TK_CONCAT 94 +#define TK_COLLATE 95 +#define TK_BITNOT 96 +#define TK_STRING 97 +#define TK_JOIN_KW 98 +#define TK_CONSTRAINT 99 +#define TK_DEFAULT 100 +#define TK_NULL 101 +#define TK_PRIMARY 102 +#define TK_UNIQUE 103 +#define TK_CHECK 104 +#define TK_REFERENCES 105 +#define TK_AUTOINCR 106 +#define TK_ON 107 +#define TK_INSERT 108 +#define TK_DELETE 109 +#define TK_UPDATE 110 +#define TK_SET 111 +#define TK_DEFERRABLE 112 +#define TK_FOREIGN 113 +#define TK_DROP 114 +#define TK_UNION 115 +#define TK_ALL 116 +#define TK_EXCEPT 117 +#define TK_INTERSECT 118 +#define TK_SELECT 119 +#define TK_VALUES 120 +#define TK_DISTINCT 121 +#define TK_DOT 122 +#define TK_FROM 123 +#define TK_JOIN 124 +#define TK_USING 125 +#define TK_ORDER 126 +#define TK_GROUP 127 +#define TK_HAVING 128 +#define TK_LIMIT 129 +#define TK_WHERE 130 +#define TK_INTO 131 +#define TK_INTEGER 132 +#define TK_FLOAT 133 +#define TK_BLOB 134 +#define TK_VARIABLE 135 +#define TK_CASE 136 +#define TK_WHEN 137 +#define TK_THEN 138 +#define TK_ELSE 139 +#define TK_INDEX 140 +#define TK_ALTER 141 +#define TK_ADD 142 +#define TK_TO_TEXT 143 +#define TK_TO_BLOB 144 +#define TK_TO_NUMERIC 145 +#define TK_TO_INT 146 +#define TK_TO_REAL 147 +#define TK_ISNOT 148 +#define TK_END_OF_FILE 149 +#define TK_ILLEGAL 150 +#define TK_SPACE 151 +#define TK_UNCLOSED_STRING 152 +#define TK_FUNCTION 153 +#define TK_COLUMN 154 +#define TK_AGG_FUNCTION 155 +#define TK_AGG_COLUMN 156 +#define TK_UMINUS 157 +#define TK_UPLUS 158 +#define TK_REGISTER 159 + +/************** End of parse.h ***********************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ +#include +#include +#include +#include +#include /* -** The Vdbe.aColName array contains 5n Mem structures, where n is the -** number of columns of data returned by the statement. +** If compiling for a processor that lacks floating point support, +** substitute integer for floating-point */ -#define COLNAME_NAME 0 -#define COLNAME_DECLTYPE 1 -#define COLNAME_DATABASE 2 -#define COLNAME_TABLE 3 -#define COLNAME_COLUMN 4 -#ifdef SQLITE_ENABLE_COLUMN_METADATA -# define COLNAME_N 5 /* Number of COLNAME_xxx symbols */ -#else -# ifdef SQLITE_OMIT_DECLTYPE -# define COLNAME_N 1 /* Store only the name */ -# else -# define COLNAME_N 2 /* Store the name and decltype */ +#ifdef SQLITE_OMIT_FLOATING_POINT +# define double sqlite_int64 +# define float sqlite_int64 +# define LONGDOUBLE_TYPE sqlite_int64 +# ifndef SQLITE_BIG_DBL +# define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50) # endif +# define SQLITE_OMIT_DATETIME_FUNCS 1 +# define SQLITE_OMIT_TRACE 1 +# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT +# undef SQLITE_HAVE_ISNAN +#endif +#ifndef SQLITE_BIG_DBL +# define SQLITE_BIG_DBL (1e99) #endif /* -** The following macro converts a relative address in the p2 field -** of a VdbeOp structure into a negative number so that -** sqlite3VdbeAddOpList() knows that the address is relative. Calling -** the macro again restores the address. +** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 +** afterward. Having this macro allows us to cause the C compiler +** to omit code used by TEMP tables without messy #ifndef statements. */ -#define ADDR(X) (-1-(X)) +#ifdef SQLITE_OMIT_TEMPDB +#define OMIT_TEMPDB 1 +#else +#define OMIT_TEMPDB 0 +#endif /* -** The makefile scans the vdbe.c source file and creates the "opcodes.h" -** header file that defines a number for each opcode used by the VDBE. +** The "file format" number is an integer that is incremented whenever +** the VDBE-level file format changes. The following macros define the +** the default file format for new databases and the maximum file format +** that the library can read. */ -/************** Include opcodes.h in the middle of vdbe.h ********************/ -/************** Begin file opcodes.h *****************************************/ -/* Automatically generated. Do not edit */ -/* See the mkopcodeh.awk script for details */ -#define OP_Goto 1 -#define OP_Gosub 2 -#define OP_Return 3 -#define OP_Yield 4 -#define OP_HaltIfNull 5 -#define OP_Halt 6 -#define OP_Integer 7 -#define OP_Int64 8 -#define OP_Real 130 /* same as TK_FLOAT */ -#define OP_String8 94 /* same as TK_STRING */ -#define OP_String 9 -#define OP_Null 10 -#define OP_Blob 11 -#define OP_Variable 12 -#define OP_Move 13 -#define OP_Copy 14 -#define OP_SCopy 15 -#define OP_ResultRow 16 -#define OP_Concat 91 /* same as TK_CONCAT */ -#define OP_Add 86 /* same as TK_PLUS */ -#define OP_Subtract 87 /* same as TK_MINUS */ -#define OP_Multiply 88 /* same as TK_STAR */ -#define OP_Divide 89 /* same as TK_SLASH */ -#define OP_Remainder 90 /* same as TK_REM */ -#define OP_CollSeq 17 -#define OP_Function 18 -#define OP_BitAnd 82 /* same as TK_BITAND */ -#define OP_BitOr 83 /* same as TK_BITOR */ -#define OP_ShiftLeft 84 /* same as TK_LSHIFT */ -#define OP_ShiftRight 85 /* same as TK_RSHIFT */ -#define OP_AddImm 20 -#define OP_MustBeInt 21 -#define OP_RealAffinity 22 -#define OP_ToText 141 /* same as TK_TO_TEXT */ -#define OP_ToBlob 142 /* same as TK_TO_BLOB */ -#define OP_ToNumeric 143 /* same as TK_TO_NUMERIC*/ -#define OP_ToInt 144 /* same as TK_TO_INT */ -#define OP_ToReal 145 /* same as TK_TO_REAL */ -#define OP_Eq 76 /* same as TK_EQ */ -#define OP_Ne 75 /* same as TK_NE */ -#define OP_Lt 79 /* same as TK_LT */ -#define OP_Le 78 /* same as TK_LE */ -#define OP_Gt 77 /* same as TK_GT */ -#define OP_Ge 80 /* same as TK_GE */ -#define OP_Permutation 23 -#define OP_Compare 24 -#define OP_Jump 25 -#define OP_And 69 /* same as TK_AND */ -#define OP_Or 68 /* same as TK_OR */ -#define OP_Not 19 /* same as TK_NOT */ -#define OP_BitNot 93 /* same as TK_BITNOT */ -#define OP_If 26 -#define OP_IfNot 27 -#define OP_IsNull 73 /* same as TK_ISNULL */ -#define OP_NotNull 74 /* same as TK_NOTNULL */ -#define OP_Column 28 -#define OP_Affinity 29 -#define OP_MakeRecord 30 -#define OP_Count 31 -#define OP_Savepoint 32 -#define OP_AutoCommit 33 -#define OP_Transaction 34 -#define OP_ReadCookie 35 -#define OP_SetCookie 36 -#define OP_VerifyCookie 37 -#define OP_OpenRead 38 -#define OP_OpenWrite 39 -#define OP_OpenAutoindex 40 -#define OP_OpenEphemeral 41 -#define OP_OpenPseudo 42 -#define OP_Close 43 -#define OP_SeekLt 44 -#define OP_SeekLe 45 -#define OP_SeekGe 46 -#define OP_SeekGt 47 -#define OP_Seek 48 -#define OP_NotFound 49 -#define OP_Found 50 -#define OP_IsUnique 51 -#define OP_NotExists 52 -#define OP_Sequence 53 -#define OP_NewRowid 54 -#define OP_Insert 55 -#define OP_InsertInt 56 -#define OP_Delete 57 -#define OP_ResetCount 58 -#define OP_RowKey 59 -#define OP_RowData 60 -#define OP_Rowid 61 -#define OP_NullRow 62 -#define OP_Last 63 -#define OP_Sort 64 -#define OP_Rewind 65 -#define OP_Prev 66 -#define OP_Next 67 -#define OP_IdxInsert 70 -#define OP_IdxDelete 71 -#define OP_IdxRowid 72 -#define OP_IdxLT 81 -#define OP_IdxGE 92 -#define OP_Destroy 95 -#define OP_Clear 96 -#define OP_CreateIndex 97 -#define OP_CreateTable 98 -#define OP_ParseSchema 99 -#define OP_LoadAnalysis 100 -#define OP_DropTable 101 -#define OP_DropIndex 102 -#define OP_DropTrigger 103 -#define OP_IntegrityCk 104 -#define OP_RowSetAdd 105 -#define OP_RowSetRead 106 -#define OP_RowSetTest 107 -#define OP_Program 108 -#define OP_Param 109 -#define OP_FkCounter 110 -#define OP_FkIfZero 111 -#define OP_MemMax 112 -#define OP_IfPos 113 -#define OP_IfNeg 114 -#define OP_IfZero 115 -#define OP_AggStep 116 -#define OP_AggFinal 117 -#define OP_Checkpoint 118 -#define OP_JournalMode 119 -#define OP_Vacuum 120 -#define OP_IncrVacuum 121 -#define OP_Expire 122 -#define OP_TableLock 123 -#define OP_VBegin 124 -#define OP_VCreate 125 -#define OP_VDestroy 126 -#define OP_VOpen 127 -#define OP_VFilter 128 -#define OP_VColumn 129 -#define OP_VNext 131 -#define OP_VRename 132 -#define OP_VUpdate 133 -#define OP_Pagecount 134 -#define OP_MaxPgcnt 135 -#define OP_Trace 136 -#define OP_Noop 137 -#define OP_Explain 138 - -/* The following opcode values are never used */ -#define OP_NotUsed_139 139 -#define OP_NotUsed_140 140 - +#define SQLITE_MAX_FILE_FORMAT 4 +#ifndef SQLITE_DEFAULT_FILE_FORMAT +# define SQLITE_DEFAULT_FILE_FORMAT 4 +#endif -/* Properties such as "out2" or "jump" that are specified in -** comments following the "case" for each opcode in the vdbe.c -** are encoded into bitvectors as follows: +/* +** Determine whether triggers are recursive by default. This can be +** changed at run-time using a pragma. */ -#define OPFLG_JUMP 0x0001 /* jump: P2 holds jmp target */ -#define OPFLG_OUT2_PRERELEASE 0x0002 /* out2-prerelease: */ -#define OPFLG_IN1 0x0004 /* in1: P1 is an input */ -#define OPFLG_IN2 0x0008 /* in2: P2 is an input */ -#define OPFLG_IN3 0x0010 /* in3: P3 is an input */ -#define OPFLG_OUT2 0x0020 /* out2: P2 is an output */ -#define OPFLG_OUT3 0x0040 /* out3: P3 is an output */ -#define OPFLG_INITIALIZER {\ -/* 0 */ 0x00, 0x01, 0x05, 0x04, 0x04, 0x10, 0x00, 0x02,\ -/* 8 */ 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, 0x24, 0x24,\ -/* 16 */ 0x00, 0x00, 0x00, 0x24, 0x04, 0x05, 0x04, 0x00,\ -/* 24 */ 0x00, 0x01, 0x05, 0x05, 0x00, 0x00, 0x00, 0x02,\ -/* 32 */ 0x00, 0x00, 0x00, 0x02, 0x10, 0x00, 0x00, 0x00,\ -/* 40 */ 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11,\ -/* 48 */ 0x08, 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x00,\ -/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01,\ -/* 64 */ 0x01, 0x01, 0x01, 0x01, 0x4c, 0x4c, 0x08, 0x00,\ -/* 72 */ 0x02, 0x05, 0x05, 0x15, 0x15, 0x15, 0x15, 0x15,\ -/* 80 */ 0x15, 0x01, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,\ -/* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x01, 0x24, 0x02, 0x02,\ -/* 96 */ 0x00, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 104 */ 0x00, 0x0c, 0x45, 0x15, 0x01, 0x02, 0x00, 0x01,\ -/* 112 */ 0x08, 0x05, 0x05, 0x05, 0x00, 0x00, 0x00, 0x02,\ -/* 120 */ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 128 */ 0x01, 0x00, 0x02, 0x01, 0x00, 0x00, 0x02, 0x02,\ -/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04,\ -/* 144 */ 0x04, 0x04,} +#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS +# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0 +#endif -/************** End of opcodes.h *********************************************/ -/************** Continuing where we left off in vdbe.h ***********************/ +/* +** Provide a default value for SQLITE_TEMP_STORE in case it is not specified +** on the command-line +*/ +#ifndef SQLITE_TEMP_STORE +# define SQLITE_TEMP_STORE 1 +# define SQLITE_TEMP_STORE_xc 1 /* Exclude from ctime.c */ +#endif /* -** Prototypes for the VDBE interface. See comments on the implementation -** for a description of what each of these routines does. +** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if +** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it +** to zero. */ -SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(sqlite3*); -SQLITE_PRIVATE int sqlite3VdbeAddOp0(Vdbe*,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp1(Vdbe*,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp2(Vdbe*,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe*,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int); -SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp); -SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*); -SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, int addr, int P1); -SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, int addr, int P2); -SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, int addr, int P3); -SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5); -SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr); -SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe*, int addr, int N); -SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N); -SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int); -SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int); -SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeDeleteObject(sqlite3*,Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*); -SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int); -SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*); -#ifdef SQLITE_DEBUG -SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int); -SQLITE_PRIVATE void sqlite3VdbeTrace(Vdbe*,FILE*); +#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0 +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 0 #endif -SQLITE_PRIVATE void sqlite3VdbeResetStepResult(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeRewind(Vdbe*); -SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe*,int); -SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*)); -SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*); -SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int); -SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*); -SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*); -SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetValue(Vdbe*, int, u8); -SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe*, int); -#ifndef SQLITE_OMIT_TRACE -SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); +#ifndef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 8 +#endif +#ifndef SQLITE_DEFAULT_WORKER_THREADS +# define SQLITE_DEFAULT_WORKER_THREADS 0 +#endif +#if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS #endif -SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,char*,int); -SQLITE_PRIVATE void sqlite3VdbeDeleteUnpackedRecord(UnpackedRecord*); -SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); -#ifndef SQLITE_OMIT_TRIGGER -SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *); +/* +** GCC does not define the offsetof() macro so we'll have to do it +** ourselves. +*/ +#ifndef offsetof +#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) #endif +/* +** Macros to compute minimum and maximum of two numbers. +*/ +#define MIN(A,B) ((A)<(B)?(A):(B)) +#define MAX(A,B) ((A)>(B)?(A):(B)) -#ifndef NDEBUG -SQLITE_PRIVATE void sqlite3VdbeComment(Vdbe*, const char*, ...); -# define VdbeComment(X) sqlite3VdbeComment X -SQLITE_PRIVATE void sqlite3VdbeNoopComment(Vdbe*, const char*, ...); -# define VdbeNoopComment(X) sqlite3VdbeNoopComment X +/* +** Swap two objects of type TYPE. +*/ +#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} + +/* +** Check to see if this machine uses EBCDIC. (Yes, believe it or +** not, there are still machines out there that use EBCDIC.) +*/ +#if 'A' == '\301' +# define SQLITE_EBCDIC 1 #else -# define VdbeComment(X) -# define VdbeNoopComment(X) +# define SQLITE_ASCII 1 +#endif + +/* +** Integers of known sizes. These typedefs might change for architectures +** where the sizes very. Preprocessor macros are available so that the +** types can be conveniently redefined at compile-type. Like this: +** +** cc '-DUINTPTR_TYPE=long long int' ... +*/ +#ifndef UINT32_TYPE +# ifdef HAVE_UINT32_T +# define UINT32_TYPE uint32_t +# else +# define UINT32_TYPE unsigned int +# endif +#endif +#ifndef UINT16_TYPE +# ifdef HAVE_UINT16_T +# define UINT16_TYPE uint16_t +# else +# define UINT16_TYPE unsigned short int +# endif +#endif +#ifndef INT16_TYPE +# ifdef HAVE_INT16_T +# define INT16_TYPE int16_t +# else +# define INT16_TYPE short int +# endif +#endif +#ifndef UINT8_TYPE +# ifdef HAVE_UINT8_T +# define UINT8_TYPE uint8_t +# else +# define UINT8_TYPE unsigned char +# endif +#endif +#ifndef INT8_TYPE +# ifdef HAVE_INT8_T +# define INT8_TYPE int8_t +# else +# define INT8_TYPE signed char +# endif +#endif +#ifndef LONGDOUBLE_TYPE +# define LONGDOUBLE_TYPE long double #endif +typedef sqlite_int64 i64; /* 8-byte signed integer */ +typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ +typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ +typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ +typedef INT16_TYPE i16; /* 2-byte signed integer */ +typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ +typedef INT8_TYPE i8; /* 1-byte signed integer */ + +/* +** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value +** that can be stored in a u32 without loss of data. The value +** is 0x00000000ffffffff. But because of quirks of some compilers, we +** have to specify the value in the less intuitive manner shown: +*/ +#define SQLITE_MAX_U32 ((((u64)1)<<32)-1) +/* +** The datatype used to store estimates of the number of rows in a +** table or index. This is an unsigned integer type. For 99.9% of +** the world, a 32-bit integer is sufficient. But a 64-bit integer +** can be used at compile-time if desired. +*/ +#ifdef SQLITE_64BIT_STATS + typedef u64 tRowcnt; /* 64-bit only if requested at compile-time */ +#else + typedef u32 tRowcnt; /* 32-bit is the default */ #endif -/************** End of vdbe.h ************************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include pager.h in the middle of sqliteInt.h *****************/ -/************** Begin file pager.h *******************************************/ /* -** 2001 September 15 +** Estimated quantities used for query planning are stored as 16-bit +** logarithms. For quantity X, the value stored is 10*log2(X). This +** gives a possible range of values of approximately 1.0e986 to 1e-986. +** But the allowed values are "grainy". Not every value is representable. +** For example, quantities 16 and 17 are both represented by a LogEst +** of 40. However, since LogEst quantaties are suppose to be estimates, +** not exact values, this imprecision is not a problem. ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** "LogEst" is short for "Logarithmic Estimate". ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Examples: +** 1 -> 0 20 -> 43 10000 -> 132 +** 2 -> 10 25 -> 46 25000 -> 146 +** 3 -> 16 100 -> 66 1000000 -> 199 +** 4 -> 20 1000 -> 99 1048576 -> 200 +** 10 -> 33 1024 -> 100 4294967296 -> 320 ** -************************************************************************* -** This header file defines the interface that the sqlite page cache -** subsystem. The page cache subsystem reads and writes a file a page -** at a time and provides a journal for rollback. +** The LogEst can be negative to indicate fractional values. +** Examples: +** +** 0.5 -> -10 0.1 -> -33 0.0625 -> -40 */ +typedef INT16_TYPE LogEst; -#ifndef _PAGER_H_ -#define _PAGER_H_ +/* +** Macros to determine whether the machine is big or little endian, +** and whether or not that determination is run-time or compile-time. +** +** For best performance, an attempt is made to guess at the byte-order +** using C-preprocessor macros. If that is unsuccessful, or if +** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined +** at run-time. +*/ +#ifdef SQLITE_AMALGAMATION +SQLITE_PRIVATE const int sqlite3one = 1; +#else +SQLITE_PRIVATE const int sqlite3one; +#endif +#if (defined(i386) || defined(__i386__) || defined(_M_IX86) || \ + defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \ + defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \ + defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER) +# define SQLITE_BYTEORDER 1234 +# define SQLITE_BIGENDIAN 0 +# define SQLITE_LITTLEENDIAN 1 +# define SQLITE_UTF16NATIVE SQLITE_UTF16LE +#endif +#if (defined(sparc) || defined(__ppc__)) \ + && !defined(SQLITE_RUNTIME_BYTEORDER) +# define SQLITE_BYTEORDER 4321 +# define SQLITE_BIGENDIAN 1 +# define SQLITE_LITTLEENDIAN 0 +# define SQLITE_UTF16NATIVE SQLITE_UTF16BE +#endif +#if !defined(SQLITE_BYTEORDER) +# define SQLITE_BYTEORDER 0 /* 0 means "unknown at compile-time" */ +# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) +# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) +# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) +#endif /* -** Default maximum size for persistent journal files. A negative -** value means no limit. This value may be overridden using the -** sqlite3PagerJournalSizeLimit() API. See also "PRAGMA journal_size_limit". +** Constants for the largest and smallest possible 64-bit signed integers. +** These macros are designed to work correctly on both 32-bit and 64-bit +** compilers. */ -#ifndef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT - #define SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT -1 +#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32)) +#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64) + +/* +** Round up a number to the next larger multiple of 8. This is used +** to force 8-byte alignment on 64-bit architectures. +*/ +#define ROUND8(x) (((x)+7)&~7) + +/* +** Round down to the nearest multiple of 8 +*/ +#define ROUNDDOWN8(x) ((x)&~7) + +/* +** Assert that the pointer X is aligned to an 8-byte boundary. This +** macro is used only within assert() to verify that the code gets +** all alignment restrictions correct. +** +** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the +** underlying malloc() implementation might return us 4-byte aligned +** pointers. In that case, only verify 4-byte alignment. +*/ +#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC +# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0) +#else +# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0) #endif /* -** The type used to represent a page number. The first page in a file -** is called page 1. 0 is used to represent "not a page". +** Disable MMAP on platforms where it is known to not work */ -typedef u32 Pgno; +#if defined(__OpenBSD__) || defined(__QNXNTO__) +# undef SQLITE_MAX_MMAP_SIZE +# define SQLITE_MAX_MMAP_SIZE 0 +#endif /* -** Each open file is managed by a separate instance of the "Pager" structure. +** Default maximum size of memory used by memory-mapped I/O in the VFS */ -typedef struct Pager Pager; +#ifdef __APPLE__ +# include +# if TARGET_OS_IPHONE +# undef SQLITE_MAX_MMAP_SIZE +# define SQLITE_MAX_MMAP_SIZE 0 +# endif +#endif +#ifndef SQLITE_MAX_MMAP_SIZE +# if defined(__linux__) \ + || defined(_WIN32) \ + || (defined(__APPLE__) && defined(__MACH__)) \ + || defined(__sun) +# define SQLITE_MAX_MMAP_SIZE 0x7fff0000 /* 2147418112 */ +# else +# define SQLITE_MAX_MMAP_SIZE 0 +# endif +# define SQLITE_MAX_MMAP_SIZE_xc 1 /* exclude from ctime.c */ +#endif /* -** Handle type for pages. +** The default MMAP_SIZE is zero on all platforms. Or, even if a larger +** default MMAP_SIZE is specified at compile-time, make sure that it does +** not exceed the maximum mmap size. */ -typedef struct PgHdr DbPage; +#ifndef SQLITE_DEFAULT_MMAP_SIZE +# define SQLITE_DEFAULT_MMAP_SIZE 0 +# define SQLITE_DEFAULT_MMAP_SIZE_xc 1 /* Exclude from ctime.c */ +#endif +#if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE +# undef SQLITE_DEFAULT_MMAP_SIZE +# define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE +#endif /* -** Page number PAGER_MJ_PGNO is never used in an SQLite database (it is -** reserved for working around a windows/posix incompatibility). It is -** used in the journal to signify that the remainder of the journal file -** is devoted to storing a master journal name - there are no more pages to -** roll back. See comments for function writeMasterJournal() in pager.c -** for details. +** Only one of SQLITE_ENABLE_STAT3 or SQLITE_ENABLE_STAT4 can be defined. +** Priority is given to SQLITE_ENABLE_STAT4. If either are defined, also +** define SQLITE_ENABLE_STAT3_OR_STAT4 */ -#define PAGER_MJ_PGNO(x) ((Pgno)((PENDING_BYTE/((x)->pageSize))+1)) +#ifdef SQLITE_ENABLE_STAT4 +# undef SQLITE_ENABLE_STAT3 +# define SQLITE_ENABLE_STAT3_OR_STAT4 1 +#elif SQLITE_ENABLE_STAT3 +# define SQLITE_ENABLE_STAT3_OR_STAT4 1 +#elif SQLITE_ENABLE_STAT3_OR_STAT4 +# undef SQLITE_ENABLE_STAT3_OR_STAT4 +#endif /* -** Allowed values for the flags parameter to sqlite3PagerOpen(). +** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not +** the Select query generator tracing logic is turned on. +*/ +#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE) +# define SELECTTRACE_ENABLED 1 +#else +# define SELECTTRACE_ENABLED 0 +#endif + +/* +** An instance of the following structure is used to store the busy-handler +** callback for a given sqlite handle. ** -** NOTE: These values must match the corresponding BTREE_ values in btree.h. +** The sqlite.busyHandler member of the sqlite struct contains the busy +** callback for the database handle. Each pager opened via the sqlite +** handle is passed a pointer to sqlite.busyHandler. The busy-handler +** callback is currently invoked only from within pager.c. */ -#define PAGER_OMIT_JOURNAL 0x0001 /* Do not use a rollback journal */ -#define PAGER_NO_READLOCK 0x0002 /* Omit readlocks on readonly files */ -#define PAGER_MEMORY 0x0004 /* In-memory database */ +typedef struct BusyHandler BusyHandler; +struct BusyHandler { + int (*xFunc)(void *,int); /* The busy callback */ + void *pArg; /* First arg to busy callback */ + int nBusy; /* Incremented with each busy call */ +}; /* -** Valid values for the second argument to sqlite3PagerLockingMode(). +** Name of the master database table. The master database table +** is a special table that holds the names and attributes of all +** user tables and indices. */ -#define PAGER_LOCKINGMODE_QUERY -1 -#define PAGER_LOCKINGMODE_NORMAL 0 -#define PAGER_LOCKINGMODE_EXCLUSIVE 1 +#define MASTER_NAME "sqlite_master" +#define TEMP_MASTER_NAME "sqlite_temp_master" /* -** Numeric constants that encode the journalmode. +** The root-page of the master database table. */ -#define PAGER_JOURNALMODE_QUERY (-1) /* Query the value of journalmode */ -#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */ -#define PAGER_JOURNALMODE_PERSIST 1 /* Commit by zeroing journal header */ -#define PAGER_JOURNALMODE_OFF 2 /* Journal omitted. */ -#define PAGER_JOURNALMODE_TRUNCATE 3 /* Commit by truncating journal */ -#define PAGER_JOURNALMODE_MEMORY 4 /* In-memory journal file */ -#define PAGER_JOURNALMODE_WAL 5 /* Use write-ahead logging */ +#define MASTER_ROOT 1 /* -** The remainder of this file contains the declarations of the functions -** that make up the Pager sub-system API. See source code comments for -** a detailed description of each routine. +** The name of the schema table. */ +#define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) -/* Open and close a Pager connection. */ -SQLITE_PRIVATE int sqlite3PagerOpen( - sqlite3_vfs*, - Pager **ppPager, - const char*, - int, - int, - int, - void(*)(DbPage*) -); -SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); +/* +** A convenience macro that returns the number of elements in +** an array. +*/ +#define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0]))) -/* Functions used to configure a Pager object. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *); -SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int); -SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int); -SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int); -SQLITE_PRIVATE void sqlite3PagerSetSafetyLevel(Pager*,int,int,int); -SQLITE_PRIVATE int sqlite3PagerLockingMode(Pager *, int); -SQLITE_PRIVATE int sqlite3PagerSetJournalMode(Pager *, int); -SQLITE_PRIVATE int sqlite3PagerGetJournalMode(Pager*); -SQLITE_PRIVATE int sqlite3PagerOkToChangeJournalMode(Pager*); -SQLITE_PRIVATE i64 sqlite3PagerJournalSizeLimit(Pager *, i64); -SQLITE_PRIVATE sqlite3_backup **sqlite3PagerBackupPtr(Pager*); +/* +** Determine if the argument is a power of two +*/ +#define IsPowerOfTwo(X) (((X)&((X)-1))==0) -/* Functions used to obtain and release page references. */ -SQLITE_PRIVATE int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag); -#define sqlite3PagerGet(A,B,C) sqlite3PagerAcquire(A,B,C,0) -SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno); -SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); -SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); - -/* Operations on page references. */ -SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); -SQLITE_PRIVATE void sqlite3PagerDontWrite(DbPage*); -SQLITE_PRIVATE int sqlite3PagerMovepage(Pager*,DbPage*,Pgno,int); -SQLITE_PRIVATE int sqlite3PagerPageRefcount(DbPage*); -SQLITE_PRIVATE void *sqlite3PagerGetData(DbPage *); -SQLITE_PRIVATE void *sqlite3PagerGetExtra(DbPage *); - -/* Functions used to manage pager transactions and savepoints. */ -SQLITE_PRIVATE void sqlite3PagerPagecount(Pager*, int*); -SQLITE_PRIVATE int sqlite3PagerBegin(Pager*, int exFlag, int); -SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne(Pager*,const char *zMaster, int); -SQLITE_PRIVATE int sqlite3PagerExclusiveLock(Pager*); -SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerCommitPhaseTwo(Pager*); -SQLITE_PRIVATE int sqlite3PagerRollback(Pager*); -SQLITE_PRIVATE int sqlite3PagerOpenSavepoint(Pager *pPager, int n); -SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint); -SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager); - -SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*); -SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager); -SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen); -SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager); - -/* Functions used to query pager state and configuration. */ -SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*); -SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*); -SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*); -SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*); -SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager*); -SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*); -SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*); -SQLITE_PRIVATE int sqlite3PagerNosync(Pager*); -SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*); -SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*); - -/* Functions used to truncate the database file. */ -SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); - -#if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_WAL) -SQLITE_PRIVATE void *sqlite3PagerCodec(DbPage *); -#endif +/* +** The following value as a destructor means to use sqlite3DbFree(). +** The sqlite3DbFree() routine requires two parameters instead of the +** one parameter that destructors normally want. So we have to introduce +** this magic value that the code knows to handle differently. Any +** pointer will work here as long as it is distinct from SQLITE_STATIC +** and SQLITE_TRANSIENT. +*/ +#define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3MallocSize) -/* Functions to support testing and debugging. */ -#if !defined(NDEBUG) || defined(SQLITE_TEST) -SQLITE_PRIVATE Pgno sqlite3PagerPagenumber(DbPage*); -SQLITE_PRIVATE int sqlite3PagerIswriteable(DbPage*); -#endif -#ifdef SQLITE_TEST -SQLITE_PRIVATE int *sqlite3PagerStats(Pager*); -SQLITE_PRIVATE void sqlite3PagerRefdump(Pager*); - void disable_simulated_io_errors(void); - void enable_simulated_io_errors(void); +/* +** When SQLITE_OMIT_WSD is defined, it means that the target platform does +** not support Writable Static Data (WSD) such as global and static variables. +** All variables must either be on the stack or dynamically allocated from +** the heap. When WSD is unsupported, the variable declarations scattered +** throughout the SQLite code must become constants instead. The SQLITE_WSD +** macro is used for this purpose. And instead of referencing the variable +** directly, we use its constant as a key to lookup the run-time allocated +** buffer that holds real variable. The constant is also the initializer +** for the run-time allocated buffer. +** +** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL +** macros become no-ops and have zero performance impact. +*/ +#ifdef SQLITE_OMIT_WSD + #define SQLITE_WSD const + #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v))) + #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config) +SQLITE_API int sqlite3_wsd_init(int N, int J); +SQLITE_API void *sqlite3_wsd_find(void *K, int L); #else -# define disable_simulated_io_errors() -# define enable_simulated_io_errors() + #define SQLITE_WSD + #define GLOBAL(t,v) v + #define sqlite3GlobalConfig sqlite3Config #endif -#endif /* _PAGER_H_ */ +/* +** The following macros are used to suppress compiler warnings and to +** make it clear to human readers when a function parameter is deliberately +** left unused within the body of a function. This usually happens when +** a function is called via a function pointer. For example the +** implementation of an SQL aggregate step callback may not use the +** parameter indicating the number of arguments passed to the aggregate, +** if it knows that this is enforced elsewhere. +** +** When a function parameter is not used at all within the body of a function, +** it is generally named "NotUsed" or "NotUsed2" to make things even clearer. +** However, these macros may also be used to suppress warnings related to +** parameters that may or may not be used depending on compilation options. +** For example those parameters only used in assert() statements. In these +** cases the parameters are named as per the usual conventions. +*/ +#define UNUSED_PARAMETER(x) (void)(x) +#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y) -/************** End of pager.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include pcache.h in the middle of sqliteInt.h ****************/ -/************** Begin file pcache.h ******************************************/ /* -** 2008 August 05 +** Forward references to structures +*/ +typedef struct AggInfo AggInfo; +typedef struct AuthContext AuthContext; +typedef struct AutoincInfo AutoincInfo; +typedef struct Bitvec Bitvec; +typedef struct CollSeq CollSeq; +typedef struct Column Column; +typedef struct Db Db; +typedef struct Schema Schema; +typedef struct Expr Expr; +typedef struct ExprList ExprList; +typedef struct ExprSpan ExprSpan; +typedef struct FKey FKey; +typedef struct FuncDestructor FuncDestructor; +typedef struct FuncDef FuncDef; +typedef struct FuncDefHash FuncDefHash; +typedef struct IdList IdList; +typedef struct Index Index; +typedef struct IndexSample IndexSample; +typedef struct KeyClass KeyClass; +typedef struct KeyInfo KeyInfo; +typedef struct Lookaside Lookaside; +typedef struct LookasideSlot LookasideSlot; +typedef struct Module Module; +typedef struct NameContext NameContext; +typedef struct Parse Parse; +typedef struct PrintfArguments PrintfArguments; +typedef struct RowSet RowSet; +typedef struct Savepoint Savepoint; +typedef struct Select Select; +typedef struct SQLiteThread SQLiteThread; +typedef struct SelectDest SelectDest; +typedef struct SrcList SrcList; +typedef struct StrAccum StrAccum; +typedef struct Table Table; +typedef struct TableLock TableLock; +typedef struct Token Token; +typedef struct TreeView TreeView; +typedef struct Trigger Trigger; +typedef struct TriggerPrg TriggerPrg; +typedef struct TriggerStep TriggerStep; +typedef struct UnpackedRecord UnpackedRecord; +typedef struct VTable VTable; +typedef struct VtabCtx VtabCtx; +typedef struct Walker Walker; +typedef struct WhereInfo WhereInfo; +typedef struct With With; + +/* +** Defer sourcing vdbe.h and btree.h until after the "u8" and +** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque +** pointer types (i.e. FuncDef) defined above. +*/ +/************** Include btree.h in the middle of sqliteInt.h *****************/ +/************** Begin file btree.h *******************************************/ +/* +** 2001 September 15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -8746,158 +8939,258 @@ SQLITE_PRIVATE void sqlite3PagerRefdump(Pager*); ** May you share freely, never taking more than you give. ** ************************************************************************* -** This header file defines the interface that the sqlite page cache -** subsystem. +** This header file defines the interface that the sqlite B-Tree file +** subsystem. See comments in the source code for a detailed description +** of what each interface routine does. */ +#ifndef _BTREE_H_ +#define _BTREE_H_ -#ifndef _PCACHE_H_ - -typedef struct PgHdr PgHdr; -typedef struct PCache PCache; +/* TODO: This definition is just included so other modules compile. It +** needs to be revisited. +*/ +#define SQLITE_N_BTREE_META 10 /* -** Every page in the cache is controlled by an instance of the following -** structure. +** If defined as non-zero, auto-vacuum is enabled by default. Otherwise +** it must be turned on for each database using "PRAGMA auto_vacuum = 1". */ -struct PgHdr { - void *pData; /* Content of this page */ - void *pExtra; /* Extra content */ - PgHdr *pDirty; /* Transient list of dirty pages */ - Pgno pgno; /* Page number for this page */ - Pager *pPager; /* The pager this page is part of */ -#ifdef SQLITE_CHECK_PAGES - u32 pageHash; /* Hash of page content */ +#ifndef SQLITE_DEFAULT_AUTOVACUUM + #define SQLITE_DEFAULT_AUTOVACUUM 0 #endif - u16 flags; /* PGHDR flags defined below */ - /********************************************************************** - ** Elements above are public. All that follows is private to pcache.c - ** and should not be accessed by other modules. - */ - i16 nRef; /* Number of users of this page */ - PCache *pCache; /* Cache that owns this page */ +#define BTREE_AUTOVACUUM_NONE 0 /* Do not do auto-vacuum */ +#define BTREE_AUTOVACUUM_FULL 1 /* Do full auto-vacuum */ +#define BTREE_AUTOVACUUM_INCR 2 /* Incremental vacuum */ - PgHdr *pDirtyNext; /* Next element in list of dirty pages */ - PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */ -}; +/* +** Forward declarations of structure +*/ +typedef struct Btree Btree; +typedef struct BtCursor BtCursor; +typedef struct BtShared BtShared; -/* Bit values for PgHdr.flags */ -#define PGHDR_DIRTY 0x002 /* Page has changed */ -#define PGHDR_NEED_SYNC 0x004 /* Fsync the rollback journal before - ** writing this page to the database */ -#define PGHDR_NEED_READ 0x008 /* Content is unread */ -#define PGHDR_REUSE_UNLIKELY 0x010 /* A hint that reuse is unlikely */ -#define PGHDR_DONT_WRITE 0x020 /* Do not write content to disk */ -/* Initialize and shutdown the page cache subsystem */ -SQLITE_PRIVATE int sqlite3PcacheInitialize(void); -SQLITE_PRIVATE void sqlite3PcacheShutdown(void); +SQLITE_PRIVATE int sqlite3BtreeOpen( + sqlite3_vfs *pVfs, /* VFS to use with this b-tree */ + const char *zFilename, /* Name of database file to open */ + sqlite3 *db, /* Associated database connection */ + Btree **ppBtree, /* Return open Btree* here */ + int flags, /* Flags */ + int vfsFlags /* Flags passed through to VFS open */ +); -/* Page cache buffer management: -** These routines implement SQLITE_CONFIG_PAGECACHE. +/* The flags parameter to sqlite3BtreeOpen can be the bitwise or of the +** following values. +** +** NOTE: These values must match the corresponding PAGER_ values in +** pager.h. */ -SQLITE_PRIVATE void sqlite3PCacheBufferSetup(void *, int sz, int n); +#define BTREE_OMIT_JOURNAL 1 /* Do not create or use a rollback journal */ +#define BTREE_MEMORY 2 /* This is an in-memory DB */ +#define BTREE_SINGLE 4 /* The file contains at most 1 b-tree */ +#define BTREE_UNORDERED 8 /* Use of a hash implementation is OK */ -/* Create a new pager cache. -** Under memory stress, invoke xStress to try to make pages clean. -** Only clean and unpinned pages can be reclaimed. -*/ -SQLITE_PRIVATE void sqlite3PcacheOpen( - int szPage, /* Size of every page */ - int szExtra, /* Extra space associated with each page */ - int bPurgeable, /* True if pages are on backing store */ - int (*xStress)(void*, PgHdr*), /* Call to try to make pages clean */ - void *pStress, /* Argument to xStress */ - PCache *pToInit /* Preallocated space for the PCache */ -); +SQLITE_PRIVATE int sqlite3BtreeClose(Btree*); +SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int); +#if SQLITE_MAX_MMAP_SIZE>0 +SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64); +#endif +SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned); +SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*); +SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix); +SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*); +SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int); +SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree*); +SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree*,int); +SQLITE_PRIVATE int sqlite3BtreeGetReserve(Btree*); +#if defined(SQLITE_HAS_CODEC) || defined(SQLITE_DEBUG) +SQLITE_PRIVATE int sqlite3BtreeGetReserveNoMutex(Btree *p); +#endif +SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int); +SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *); +SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int); +SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster); +SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int); +SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*); +SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*,int,int); +SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int); +SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags); +SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*); +SQLITE_PRIVATE int sqlite3BtreeIsInReadTrans(Btree*); +SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*); +SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *)); +SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree); +SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock); +SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int); -/* Modify the page-size after the cache has been created. */ -SQLITE_PRIVATE void sqlite3PcacheSetPageSize(PCache *, int); +SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *); +SQLITE_PRIVATE const char *sqlite3BtreeGetJournalname(Btree *); +SQLITE_PRIVATE int sqlite3BtreeCopyFile(Btree *, Btree *); -/* Return the size in bytes of a PCache object. Used to preallocate -** storage space. -*/ -SQLITE_PRIVATE int sqlite3PcacheSize(void); +SQLITE_PRIVATE int sqlite3BtreeIncrVacuum(Btree *); -/* One release per successful fetch. Page is pinned until released. -** Reference counted. +/* The flags parameter to sqlite3BtreeCreateTable can be the bitwise OR +** of the flags shown below. +** +** Every SQLite table must have either BTREE_INTKEY or BTREE_BLOBKEY set. +** With BTREE_INTKEY, the table key is a 64-bit integer and arbitrary data +** is stored in the leaves. (BTREE_INTKEY is used for SQL tables.) With +** BTREE_BLOBKEY, the key is an arbitrary BLOB and no content is stored +** anywhere - the key is the content. (BTREE_BLOBKEY is used for SQL +** indices.) */ -SQLITE_PRIVATE int sqlite3PcacheFetch(PCache*, Pgno, int createFlag, PgHdr**); -SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr*); +#define BTREE_INTKEY 1 /* Table has only 64-bit signed integer keys */ +#define BTREE_BLOBKEY 2 /* Table has keys only - no data */ -SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr*); /* Remove page from cache */ -SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */ -SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */ -SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */ +SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*); +SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*); +SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree*, int, int); -/* Change a page number. Used by incr-vacuum. */ -SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno); +SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue); +SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value); -/* Remove all pages with pgno>x. Reset the cache if x==0 */ -SQLITE_PRIVATE void sqlite3PcacheTruncate(PCache*, Pgno x); +SQLITE_PRIVATE int sqlite3BtreeNewDb(Btree *p); -/* Get a list of all dirty pages in the cache, sorted by page number */ -SQLITE_PRIVATE PgHdr *sqlite3PcacheDirtyList(PCache*); +/* +** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta +** should be one of the following values. The integer values are assigned +** to constants so that the offset of the corresponding field in an +** SQLite database header may be found using the following formula: +** +** offset = 36 + (idx * 4) +** +** For example, the free-page-count field is located at byte offset 36 of +** the database file header. The incr-vacuum-flag field is located at +** byte offset 64 (== 36+4*7). +*/ +#define BTREE_FREE_PAGE_COUNT 0 +#define BTREE_SCHEMA_VERSION 1 +#define BTREE_FILE_FORMAT 2 +#define BTREE_DEFAULT_CACHE_SIZE 3 +#define BTREE_LARGEST_ROOT_PAGE 4 +#define BTREE_TEXT_ENCODING 5 +#define BTREE_USER_VERSION 6 +#define BTREE_INCR_VACUUM 7 +#define BTREE_APPLICATION_ID 8 -/* Reset and close the cache object */ -SQLITE_PRIVATE void sqlite3PcacheClose(PCache*); +/* +** Values that may be OR'd together to form the second argument of an +** sqlite3BtreeCursorHints() call. +*/ +#define BTREE_BULKLOAD 0x00000001 -/* Clear flags from pages of the page cache */ -SQLITE_PRIVATE void sqlite3PcacheClearSyncFlags(PCache *); +SQLITE_PRIVATE int sqlite3BtreeCursor( + Btree*, /* BTree containing table to open */ + int iTable, /* Index of root page */ + int wrFlag, /* 1 for writing. 0 for read-only */ + struct KeyInfo*, /* First argument to compare function */ + BtCursor *pCursor /* Space to write cursor structure */ +); +SQLITE_PRIVATE int sqlite3BtreeCursorSize(void); +SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*); -/* Discard the contents of the cache */ -SQLITE_PRIVATE void sqlite3PcacheClear(PCache*); +SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( + BtCursor*, + UnpackedRecord *pUnKey, + i64 intKey, + int bias, + int *pRes +); +SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeCursorRestore(BtCursor*, int*); +SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey, + const void *pData, int nData, + int nZero, int bias, int seekResult); +SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize); +SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*); +SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, u32 *pAmt); +SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, u32 *pAmt); +SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize); +SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*); -/* Return the total number of outstanding page references */ -SQLITE_PRIVATE int sqlite3PcacheRefCount(PCache*); +SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); +SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); -/* Increment the reference count of an existing page */ -SQLITE_PRIVATE void sqlite3PcacheRef(PgHdr*); +SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*); +SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *); +SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *); +SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion); +SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *, unsigned int mask); +SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *pBt); -SQLITE_PRIVATE int sqlite3PcachePageRefcount(PgHdr*); +#ifndef NDEBUG +SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*); +#endif -/* Return the total number of pages stored in the cache */ -SQLITE_PRIVATE int sqlite3PcachePagecount(PCache*); +#ifndef SQLITE_OMIT_BTREECOUNT +SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *); +#endif -#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) -/* Iterate through all dirty pages currently stored in the cache. This -** interface is only available if SQLITE_CHECK_PAGES is defined when the -** library is built. -*/ -SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *)); +#ifdef SQLITE_TEST +SQLITE_PRIVATE int sqlite3BtreeCursorInfo(BtCursor*, int*, int); +SQLITE_PRIVATE void sqlite3BtreeCursorList(Btree*); #endif -/* Set and get the suggested cache-size for the specified pager-cache. -** -** If no global maximum is configured, then the system attempts to limit -** the total number of pages cached by purgeable pager-caches to the sum -** of the suggested cache-sizes. +#ifndef SQLITE_OMIT_WAL +SQLITE_PRIVATE int sqlite3BtreeCheckpoint(Btree*, int, int *, int *); +#endif + +/* +** If we are not using shared cache, then there is no need to +** use mutexes to access the BtShared structures. So make the +** Enter and Leave procedures no-ops. */ -SQLITE_PRIVATE void sqlite3PcacheSetCachesize(PCache *, int); -#ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3PcacheGetCachesize(PCache *); +#ifndef SQLITE_OMIT_SHARED_CACHE +SQLITE_PRIVATE void sqlite3BtreeEnter(Btree*); +SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*); +#else +# define sqlite3BtreeEnter(X) +# define sqlite3BtreeEnterAll(X) #endif -#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT -/* Try to return memory used by the pcache module to the main memory heap */ -SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int); +#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE +SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*); +SQLITE_PRIVATE void sqlite3BtreeLeave(Btree*); +SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*); +SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor*); +SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3*); +#ifndef NDEBUG + /* These routines are used inside assert() statements only. */ +SQLITE_PRIVATE int sqlite3BtreeHoldsMutex(Btree*); +SQLITE_PRIVATE int sqlite3BtreeHoldsAllMutexes(sqlite3*); +SQLITE_PRIVATE int sqlite3SchemaMutexHeld(sqlite3*,int,Schema*); #endif +#else -#ifdef SQLITE_TEST -SQLITE_PRIVATE void sqlite3PcacheStats(int*,int*,int*,int*); +# define sqlite3BtreeSharable(X) 0 +# define sqlite3BtreeLeave(X) +# define sqlite3BtreeEnterCursor(X) +# define sqlite3BtreeLeaveCursor(X) +# define sqlite3BtreeLeaveAll(X) + +# define sqlite3BtreeHoldsMutex(X) 1 +# define sqlite3BtreeHoldsAllMutexes(X) 1 +# define sqlite3SchemaMutexHeld(X,Y,Z) 1 #endif -SQLITE_PRIVATE void sqlite3PCacheSetDefault(void); -#endif /* _PCACHE_H_ */ +#endif /* _BTREE_H_ */ -/************** End of pcache.h **********************************************/ +/************** End of btree.h ***********************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ - -/************** Include os.h in the middle of sqliteInt.h ********************/ -/************** Begin file os.h **********************************************/ +/************** Include vdbe.h in the middle of sqliteInt.h ******************/ +/************** Begin file vdbe.h ********************************************/ /* -** 2001 September 16 +** 2001 September 15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -8906,282 +9199,483 @@ SQLITE_PRIVATE void sqlite3PCacheSetDefault(void); ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** -****************************************************************************** -** -** This header file (together with is companion C source-code file -** "os.c") attempt to abstract the underlying operating system so that -** the SQLite library will work on both POSIX and windows systems. +************************************************************************* +** Header file for the Virtual DataBase Engine (VDBE) ** -** This header file is #include-ed by sqliteInt.h and thus ends up -** being included by every source file. -*/ -#ifndef _SQLITE_OS_H_ -#define _SQLITE_OS_H_ - -/* -** Figure out if we are dealing with Unix, Windows, or some other -** operating system. After the following block of preprocess macros, -** all of SQLITE_OS_UNIX, SQLITE_OS_WIN, SQLITE_OS_OS2, and SQLITE_OS_OTHER -** will defined to either 1 or 0. One of the four will be 1. The other -** three will be 0. +** This header defines the interface to the virtual database engine +** or VDBE. The VDBE implements an abstract machine that runs a +** simple program to access and modify the underlying database. */ -#if defined(SQLITE_OS_OTHER) -# if SQLITE_OS_OTHER==1 -# undef SQLITE_OS_UNIX -# define SQLITE_OS_UNIX 0 -# undef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# undef SQLITE_OS_OS2 -# define SQLITE_OS_OS2 0 -# else -# undef SQLITE_OS_OTHER -# endif -#endif -#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER) -# define SQLITE_OS_OTHER 0 -# ifndef SQLITE_OS_WIN -# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || defined(__MINGW32__) || defined(__BORLANDC__) -# define SQLITE_OS_WIN 1 -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 0 -# elif defined(__EMX__) || defined(_OS2) || defined(OS2) || defined(_OS2_) || defined(__OS2__) -# define SQLITE_OS_WIN 0 -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 1 -# else -# define SQLITE_OS_WIN 0 -# define SQLITE_OS_UNIX 1 -# define SQLITE_OS_OS2 0 -# endif -# else -# define SQLITE_OS_UNIX 0 -# define SQLITE_OS_OS2 0 -# endif -#else -# ifndef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# endif -#endif +#ifndef _SQLITE_VDBE_H_ +#define _SQLITE_VDBE_H_ +/* #include */ /* -** Determine if we are dealing with WindowsCE - which has a much -** reduced API. +** A single VDBE is an opaque structure named "Vdbe". Only routines +** in the source file sqliteVdbe.c are allowed to see the insides +** of this structure. */ -#if defined(_WIN32_WCE) -# define SQLITE_OS_WINCE 1 -#else -# define SQLITE_OS_WINCE 0 -#endif - +typedef struct Vdbe Vdbe; /* -** Define the maximum size of a temporary filename -*/ -#if SQLITE_OS_WIN -# include -# define SQLITE_TEMPNAME_SIZE (MAX_PATH+50) -#elif SQLITE_OS_OS2 -# if (__GNUC__ > 3 || __GNUC__ == 3 && __GNUC_MINOR__ >= 3) && defined(OS2_HIGH_MEMORY) -# include /* has to be included before os2.h for linking to work */ -# endif -# define INCL_DOSDATETIME -# define INCL_DOSFILEMGR -# define INCL_DOSERRORS -# define INCL_DOSMISC -# define INCL_DOSPROCESS -# define INCL_DOSMODULEMGR -# define INCL_DOSSEMAPHORES -# include -# include -# define SQLITE_TEMPNAME_SIZE (CCHMAXPATHCOMP) -#else -# define SQLITE_TEMPNAME_SIZE 200 -#endif - -/* If the SET_FULLSYNC macro is not defined above, then make it -** a no-op +** The names of the following types declared in vdbeInt.h are required +** for the VdbeOp definition. */ -#ifndef SET_FULLSYNC -# define SET_FULLSYNC(x,y) -#endif +typedef struct Mem Mem; +typedef struct SubProgram SubProgram; /* -** The default size of a disk sector +** A single instruction of the virtual machine has an opcode +** and as many as three operands. The instruction is recorded +** as an instance of the following structure: */ -#ifndef SQLITE_DEFAULT_SECTOR_SIZE -# define SQLITE_DEFAULT_SECTOR_SIZE 512 +struct VdbeOp { + u8 opcode; /* What operation to perform */ + signed char p4type; /* One of the P4_xxx constants for p4 */ + u8 opflags; /* Mask of the OPFLG_* flags in opcodes.h */ + u8 p5; /* Fifth parameter is an unsigned character */ + int p1; /* First operand */ + int p2; /* Second parameter (often the jump destination) */ + int p3; /* The third parameter */ + union { /* fourth parameter */ + int i; /* Integer value if p4type==P4_INT32 */ + void *p; /* Generic pointer */ + char *z; /* Pointer to data for string (char array) types */ + i64 *pI64; /* Used when p4type is P4_INT64 */ + double *pReal; /* Used when p4type is P4_REAL */ + FuncDef *pFunc; /* Used when p4type is P4_FUNCDEF */ + CollSeq *pColl; /* Used when p4type is P4_COLLSEQ */ + Mem *pMem; /* Used when p4type is P4_MEM */ + VTable *pVtab; /* Used when p4type is P4_VTAB */ + KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */ + int *ai; /* Used when p4type is P4_INTARRAY */ + SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */ + int (*xAdvance)(BtCursor *, int *); + } p4; +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS + char *zComment; /* Comment to improve readability */ +#endif +#ifdef VDBE_PROFILE + u32 cnt; /* Number of times this instruction was executed */ + u64 cycles; /* Total time spent executing this instruction */ #endif +#ifdef SQLITE_VDBE_COVERAGE + int iSrcLine; /* Source-code line that generated this opcode */ +#endif +}; +typedef struct VdbeOp VdbeOp; + /* -** Temporary files are named starting with this prefix followed by 16 random -** alphanumeric characters, and no file extension. They are stored in the -** OS's standard temporary file directory, and are deleted prior to exit. -** If sqlite is being embedded in another program, you may wish to change the -** prefix to reflect your program's name, so that if your program exits -** prematurely, old temporary files can be easily identified. This can be done -** using -DSQLITE_TEMP_FILE_PREFIX=myprefix_ on the compiler command line. -** -** 2006-10-31: The default prefix used to be "sqlite_". But then -** Mcafee started using SQLite in their anti-virus product and it -** started putting files with the "sqlite" name in the c:/temp folder. -** This annoyed many windows users. Those users would then do a -** Google search for "sqlite", find the telephone numbers of the -** developers and call to wake them up at night and complain. -** For this reason, the default name prefix is changed to be "sqlite" -** spelled backwards. So the temp files are still identified, but -** anybody smart enough to figure out the code is also likely smart -** enough to know that calling the developer will not help get rid -** of the file. +** A sub-routine used to implement a trigger program. */ -#ifndef SQLITE_TEMP_FILE_PREFIX -# define SQLITE_TEMP_FILE_PREFIX "etilqs_" -#endif +struct SubProgram { + VdbeOp *aOp; /* Array of opcodes for sub-program */ + int nOp; /* Elements in aOp[] */ + int nMem; /* Number of memory cells required */ + int nCsr; /* Number of cursors required */ + int nOnce; /* Number of OP_Once instructions */ + void *token; /* id that may be used to recursive triggers */ + SubProgram *pNext; /* Next sub-program already visited */ +}; /* -** The following values may be passed as the second argument to -** sqlite3OsLock(). The various locks exhibit the following semantics: -** -** SHARED: Any number of processes may hold a SHARED lock simultaneously. -** RESERVED: A single process may hold a RESERVED lock on a file at -** any time. Other processes may hold and obtain new SHARED locks. -** PENDING: A single process may hold a PENDING lock on a file at -** any one time. Existing SHARED locks may persist, but no new -** SHARED locks may be obtained by other processes. -** EXCLUSIVE: An EXCLUSIVE lock precludes all other locks. -** -** PENDING_LOCK may not be passed directly to sqlite3OsLock(). Instead, a -** process that requests an EXCLUSIVE lock may actually obtain a PENDING -** lock. This can be upgraded to an EXCLUSIVE lock by a subsequent call to -** sqlite3OsLock(). +** A smaller version of VdbeOp used for the VdbeAddOpList() function because +** it takes up less space. */ -#define NO_LOCK 0 -#define SHARED_LOCK 1 -#define RESERVED_LOCK 2 -#define PENDING_LOCK 3 -#define EXCLUSIVE_LOCK 4 +struct VdbeOpList { + u8 opcode; /* What operation to perform */ + signed char p1; /* First operand */ + signed char p2; /* Second parameter (often the jump destination) */ + signed char p3; /* Third parameter */ +}; +typedef struct VdbeOpList VdbeOpList; /* -** File Locking Notes: (Mostly about windows but also some info for Unix) -** -** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because -** those functions are not available. So we use only LockFile() and -** UnlockFile(). -** -** LockFile() prevents not just writing but also reading by other processes. -** A SHARED_LOCK is obtained by locking a single randomly-chosen -** byte out of a specific range of bytes. The lock byte is obtained at -** random so two separate readers can probably access the file at the -** same time, unless they are unlucky and choose the same lock byte. -** An EXCLUSIVE_LOCK is obtained by locking all bytes in the range. -** There can only be one writer. A RESERVED_LOCK is obtained by locking -** a single byte of the file that is designated as the reserved lock byte. -** A PENDING_LOCK is obtained by locking a designated byte different from -** the RESERVED_LOCK byte. -** -** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available, -** which means we can use reader/writer locks. When reader/writer locks -** are used, the lock is placed on the same range of bytes that is used -** for probabilistic locking in Win95/98/ME. Hence, the locking scheme -** will support two or more Win95 readers or two or more WinNT readers. -** But a single Win95 reader will lock out all WinNT readers and a single -** WinNT reader will lock out all other Win95 readers. -** -** The following #defines specify the range of bytes used for locking. -** SHARED_SIZE is the number of bytes available in the pool from which -** a random byte is selected for a shared lock. The pool of bytes for -** shared locks begins at SHARED_FIRST. -** -** The same locking strategy and -** byte ranges are used for Unix. This leaves open the possiblity of having -** clients on win95, winNT, and unix all talking to the same shared file -** and all locking correctly. To do so would require that samba (or whatever -** tool is being used for file sharing) implements locks correctly between -** windows and unix. I'm guessing that isn't likely to happen, but by -** using the same locking range we are at least open to the possibility. -** -** Locking in windows is manditory. For this reason, we cannot store -** actual data in the bytes used for locking. The pager never allocates -** the pages involved in locking therefore. SHARED_SIZE is selected so -** that all locks will fit on a single page even at the minimum page size. -** PENDING_BYTE defines the beginning of the locks. By default PENDING_BYTE -** is set high so that we don't have to allocate an unused page except -** for very large databases. But one should test the page skipping logic -** by setting PENDING_BYTE low and running the entire regression suite. -** -** Changing the value of PENDING_BYTE results in a subtly incompatible -** file format. Depending on how it is changed, you might not notice -** the incompatibility right away, even running a full regression test. -** The default location of PENDING_BYTE is the first byte past the -** 1GB boundary. -** +** Allowed values of VdbeOp.p4type */ -#ifdef SQLITE_OMIT_WSD -# define PENDING_BYTE (0x40000000) +#define P4_NOTUSED 0 /* The P4 parameter is not used */ +#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */ +#define P4_STATIC (-2) /* Pointer to a static string */ +#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */ +#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */ +#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */ +#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */ +#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */ +#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */ +#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */ +#define P4_REAL (-12) /* P4 is a 64-bit floating point value */ +#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */ +#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */ +#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ +#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */ +#define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */ + +/* Error message codes for OP_Halt */ +#define P5_ConstraintNotNull 1 +#define P5_ConstraintUnique 2 +#define P5_ConstraintCheck 3 +#define P5_ConstraintFK 4 + +/* +** The Vdbe.aColName array contains 5n Mem structures, where n is the +** number of columns of data returned by the statement. +*/ +#define COLNAME_NAME 0 +#define COLNAME_DECLTYPE 1 +#define COLNAME_DATABASE 2 +#define COLNAME_TABLE 3 +#define COLNAME_COLUMN 4 +#ifdef SQLITE_ENABLE_COLUMN_METADATA +# define COLNAME_N 5 /* Number of COLNAME_xxx symbols */ #else -# define PENDING_BYTE sqlite3PendingByte +# ifdef SQLITE_OMIT_DECLTYPE +# define COLNAME_N 1 /* Store only the name */ +# else +# define COLNAME_N 2 /* Store the name and decltype */ +# endif #endif -#define RESERVED_BYTE (PENDING_BYTE+1) -#define SHARED_FIRST (PENDING_BYTE+2) -#define SHARED_SIZE 510 /* -** Wrapper around OS specific sqlite3_os_init() function. +** The following macro converts a relative address in the p2 field +** of a VdbeOp structure into a negative number so that +** sqlite3VdbeAddOpList() knows that the address is relative. Calling +** the macro again restores the address. */ -SQLITE_PRIVATE int sqlite3OsInit(void); +#define ADDR(X) (-1-(X)) -/* -** Functions for accessing sqlite3_file methods +/* +** The makefile scans the vdbe.c source file and creates the "opcodes.h" +** header file that defines a number for each opcode used by the VDBE. */ -SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file*); -SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset); -SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset); -SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size); -SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file*, i64 *pSize); -SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file*, int); -SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut); -SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file*,int,void*); -#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0 -SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id); -SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id); -SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **); -SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int); -SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id); -SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int); +/************** Include opcodes.h in the middle of vdbe.h ********************/ +/************** Begin file opcodes.h *****************************************/ +/* Automatically generated. Do not edit */ +/* See the mkopcodeh.awk script for details */ +#define OP_Function 1 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_Savepoint 2 +#define OP_AutoCommit 3 +#define OP_Transaction 4 +#define OP_SorterNext 5 +#define OP_PrevIfOpen 6 +#define OP_NextIfOpen 7 +#define OP_Prev 8 +#define OP_Next 9 +#define OP_AggStep 10 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_Checkpoint 11 +#define OP_JournalMode 12 +#define OP_Vacuum 13 +#define OP_VFilter 14 /* synopsis: iplan=r[P3] zplan='P4' */ +#define OP_VUpdate 15 /* synopsis: data=r[P3@P2] */ +#define OP_Goto 16 +#define OP_Gosub 17 +#define OP_Return 18 +#define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */ +#define OP_InitCoroutine 20 +#define OP_EndCoroutine 21 +#define OP_Yield 22 +#define OP_HaltIfNull 23 /* synopsis: if r[P3]=null halt */ +#define OP_Halt 24 +#define OP_Integer 25 /* synopsis: r[P2]=P1 */ +#define OP_Int64 26 /* synopsis: r[P2]=P4 */ +#define OP_String 27 /* synopsis: r[P2]='P4' (len=P1) */ +#define OP_Null 28 /* synopsis: r[P2..P3]=NULL */ +#define OP_SoftNull 29 /* synopsis: r[P1]=NULL */ +#define OP_Blob 30 /* synopsis: r[P2]=P4 (len=P1) */ +#define OP_Variable 31 /* synopsis: r[P2]=parameter(P1,P4) */ +#define OP_Move 32 /* synopsis: r[P2@P3]=r[P1@P3] */ +#define OP_Copy 33 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ +#define OP_SCopy 34 /* synopsis: r[P2]=r[P1] */ +#define OP_ResultRow 35 /* synopsis: output=r[P1@P2] */ +#define OP_CollSeq 36 +#define OP_AddImm 37 /* synopsis: r[P1]=r[P1]+P2 */ +#define OP_MustBeInt 38 +#define OP_RealAffinity 39 +#define OP_Cast 40 /* synopsis: affinity(r[P1]) */ +#define OP_Permutation 41 +#define OP_Compare 42 /* synopsis: r[P1@P3] <-> r[P2@P3] */ +#define OP_Jump 43 +#define OP_Once 44 +#define OP_If 45 +#define OP_IfNot 46 +#define OP_Column 47 /* synopsis: r[P3]=PX */ +#define OP_Affinity 48 /* synopsis: affinity(r[P1@P2]) */ +#define OP_MakeRecord 49 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ +#define OP_Count 50 /* synopsis: r[P2]=count() */ +#define OP_ReadCookie 51 +#define OP_SetCookie 52 +#define OP_ReopenIdx 53 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenRead 54 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenWrite 55 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenAutoindex 56 /* synopsis: nColumn=P2 */ +#define OP_OpenEphemeral 57 /* synopsis: nColumn=P2 */ +#define OP_SorterOpen 58 +#define OP_SequenceTest 59 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ +#define OP_OpenPseudo 60 /* synopsis: P3 columns in r[P2] */ +#define OP_Close 61 +#define OP_SeekLT 62 /* synopsis: key=r[P3@P4] */ +#define OP_SeekLE 63 /* synopsis: key=r[P3@P4] */ +#define OP_SeekGE 64 /* synopsis: key=r[P3@P4] */ +#define OP_SeekGT 65 /* synopsis: key=r[P3@P4] */ +#define OP_Seek 66 /* synopsis: intkey=r[P2] */ +#define OP_NoConflict 67 /* synopsis: key=r[P3@P4] */ +#define OP_NotFound 68 /* synopsis: key=r[P3@P4] */ +#define OP_Found 69 /* synopsis: key=r[P3@P4] */ +#define OP_NotExists 70 /* synopsis: intkey=r[P3] */ +#define OP_Or 71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ +#define OP_And 72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ +#define OP_Sequence 73 /* synopsis: r[P2]=cursor[P1].ctr++ */ +#define OP_NewRowid 74 /* synopsis: r[P2]=rowid */ +#define OP_Insert 75 /* synopsis: intkey=r[P3] data=r[P2] */ +#define OP_IsNull 76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ +#define OP_NotNull 77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ +#define OP_Ne 78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */ +#define OP_Eq 79 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */ +#define OP_Gt 80 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */ +#define OP_Le 81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */ +#define OP_Lt 82 /* same as TK_LT, synopsis: if r[P1]=r[P3] goto P2 */ +#define OP_InsertInt 84 /* synopsis: intkey=P3 data=r[P2] */ +#define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ +#define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ +#define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<>r[P1] */ +#define OP_Add 89 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ +#define OP_Subtract 90 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ +#define OP_Multiply 91 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ +#define OP_Divide 92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ +#define OP_Remainder 93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ +#define OP_Concat 94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ +#define OP_Delete 95 +#define OP_BitNot 96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */ +#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */ +#define OP_ResetCount 98 +#define OP_SorterCompare 99 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ +#define OP_SorterData 100 /* synopsis: r[P2]=data */ +#define OP_RowKey 101 /* synopsis: r[P2]=key */ +#define OP_RowData 102 /* synopsis: r[P2]=data */ +#define OP_Rowid 103 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 104 +#define OP_Last 105 +#define OP_SorterSort 106 +#define OP_Sort 107 +#define OP_Rewind 108 +#define OP_SorterInsert 109 +#define OP_IdxInsert 110 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 111 /* synopsis: key=r[P2@P3] */ +#define OP_IdxRowid 112 /* synopsis: r[P2]=rowid */ +#define OP_IdxLE 113 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGT 114 /* synopsis: key=r[P3@P4] */ +#define OP_IdxLT 115 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGE 116 /* synopsis: key=r[P3@P4] */ +#define OP_Destroy 117 +#define OP_Clear 118 +#define OP_ResetSorter 119 +#define OP_CreateIndex 120 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_CreateTable 121 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_ParseSchema 122 +#define OP_LoadAnalysis 123 +#define OP_DropTable 124 +#define OP_DropIndex 125 +#define OP_DropTrigger 126 +#define OP_IntegrityCk 127 +#define OP_RowSetAdd 128 /* synopsis: rowset(P1)=r[P2] */ +#define OP_RowSetRead 129 /* synopsis: r[P3]=rowset(P1) */ +#define OP_RowSetTest 130 /* synopsis: if r[P3] in rowset(P1) goto P2 */ +#define OP_Program 131 +#define OP_Param 132 +#define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ +#define OP_FkCounter 134 /* synopsis: fkctr[P1]+=P2 */ +#define OP_FkIfZero 135 /* synopsis: if fkctr[P1]==0 goto P2 */ +#define OP_MemMax 136 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_IfPos 137 /* synopsis: if r[P1]>0 goto P2 */ +#define OP_IfNeg 138 /* synopsis: r[P1]+=P3, if r[P1]<0 goto P2 */ +#define OP_IfZero 139 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2 */ +#define OP_AggFinal 140 /* synopsis: accum=r[P1] N=P2 */ +#define OP_IncrVacuum 141 +#define OP_Expire 142 +#define OP_TableLock 143 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 144 +#define OP_VCreate 145 +#define OP_VDestroy 146 +#define OP_VOpen 147 +#define OP_VColumn 148 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VNext 149 +#define OP_VRename 150 +#define OP_Pagecount 151 +#define OP_MaxPgcnt 152 +#define OP_Init 153 /* synopsis: Start at P2 */ +#define OP_Noop 154 +#define OP_Explain 155 -/* -** Functions for accessing sqlite3_vfs methods + +/* Properties such as "out2" or "jump" that are specified in +** comments following the "case" for each opcode in the vdbe.c +** are encoded into bitvectors as follows: */ -SQLITE_PRIVATE int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *); -SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *, const char *, int); -SQLITE_PRIVATE int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut); -SQLITE_PRIVATE int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *); -#ifndef SQLITE_OMIT_LOAD_EXTENSION -SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *, const char *); -SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *, int, char *); -SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void); -SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *, void *); -#endif /* SQLITE_OMIT_LOAD_EXTENSION */ -SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *); -SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int); -SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*); +#define OPFLG_JUMP 0x0001 /* jump: P2 holds jmp target */ +#define OPFLG_OUT2_PRERELEASE 0x0002 /* out2-prerelease: */ +#define OPFLG_IN1 0x0004 /* in1: P1 is an input */ +#define OPFLG_IN2 0x0008 /* in2: P2 is an input */ +#define OPFLG_IN3 0x0010 /* in3: P3 is an input */ +#define OPFLG_OUT2 0x0020 /* out2: P2 is an output */ +#define OPFLG_OUT3 0x0040 /* out3: P3 is an output */ +#define OPFLG_INITIALIZER {\ +/* 0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01,\ +/* 8 */ 0x01, 0x01, 0x00, 0x00, 0x02, 0x00, 0x01, 0x00,\ +/* 16 */ 0x01, 0x01, 0x04, 0x24, 0x01, 0x04, 0x05, 0x10,\ +/* 24 */ 0x00, 0x02, 0x02, 0x02, 0x02, 0x00, 0x02, 0x02,\ +/* 32 */ 0x00, 0x00, 0x20, 0x00, 0x00, 0x04, 0x05, 0x04,\ +/* 40 */ 0x04, 0x00, 0x00, 0x01, 0x01, 0x05, 0x05, 0x00,\ +/* 48 */ 0x00, 0x00, 0x02, 0x02, 0x10, 0x00, 0x00, 0x00,\ +/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x11,\ +/* 64 */ 0x11, 0x11, 0x08, 0x11, 0x11, 0x11, 0x11, 0x4c,\ +/* 72 */ 0x4c, 0x02, 0x02, 0x00, 0x05, 0x05, 0x15, 0x15,\ +/* 80 */ 0x15, 0x15, 0x15, 0x15, 0x00, 0x4c, 0x4c, 0x4c,\ +/* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x00,\ +/* 96 */ 0x24, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,\ +/* 104 */ 0x00, 0x01, 0x01, 0x01, 0x01, 0x08, 0x08, 0x00,\ +/* 112 */ 0x02, 0x01, 0x01, 0x01, 0x01, 0x02, 0x00, 0x00,\ +/* 120 */ 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 128 */ 0x0c, 0x45, 0x15, 0x01, 0x02, 0x02, 0x00, 0x01,\ +/* 136 */ 0x08, 0x05, 0x05, 0x05, 0x00, 0x01, 0x00, 0x00,\ +/* 144 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x02,\ +/* 152 */ 0x02, 0x01, 0x00, 0x00,} + +/************** End of opcodes.h *********************************************/ +/************** Continuing where we left off in vdbe.h ***********************/ /* -** Convenience functions for opening and closing files using -** sqlite3_malloc() to obtain space for the file-handle structure. +** Prototypes for the VDBE interface. See comments on the implementation +** for a description of what each of these routines does. */ -SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*); -SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *); +SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse*); +SQLITE_PRIVATE int sqlite3VdbeAddOp0(Vdbe*,int); +SQLITE_PRIVATE int sqlite3VdbeAddOp1(Vdbe*,int,int); +SQLITE_PRIVATE int sqlite3VdbeAddOp2(Vdbe*,int,int,int); +SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe*,int,int,int,int); +SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int); +SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int); +SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno); +SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*); +SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1); +SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, u32 addr, int P2); +SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, u32 addr, int P3); +SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5); +SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr); +SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe*, int addr); +SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op); +SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N); +SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*); +SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int); +SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int); +SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3*,Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*); +SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int); +SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int); +#endif +SQLITE_PRIVATE void sqlite3VdbeResetStepResult(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeRewind(Vdbe*); +SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe*,int); +SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*)); +SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*); +SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int); +SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*); +SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*); +SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe*, int, u8); +SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe*, int); +#ifndef SQLITE_OMIT_TRACE +SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); +#endif +SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*); -#endif /* _SQLITE_OS_H_ */ +SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*); +SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); +SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **); -/************** End of os.h **************************************************/ +typedef int (*RecordCompare)(int,const void*,UnpackedRecord*); +SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*); + +#ifndef SQLITE_OMIT_TRIGGER +SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *); +#endif + +/* Use SQLITE_ENABLE_COMMENTS to enable generation of extra comments on +** each VDBE opcode. +** +** Use the SQLITE_ENABLE_MODULE_COMMENTS macro to see some extra no-op +** comments in VDBE programs that show key decision points in the code +** generator. +*/ +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS +SQLITE_PRIVATE void sqlite3VdbeComment(Vdbe*, const char*, ...); +# define VdbeComment(X) sqlite3VdbeComment X +SQLITE_PRIVATE void sqlite3VdbeNoopComment(Vdbe*, const char*, ...); +# define VdbeNoopComment(X) sqlite3VdbeNoopComment X +# ifdef SQLITE_ENABLE_MODULE_COMMENTS +# define VdbeModuleComment(X) sqlite3VdbeNoopComment X +# else +# define VdbeModuleComment(X) +# endif +#else +# define VdbeComment(X) +# define VdbeNoopComment(X) +# define VdbeModuleComment(X) +#endif + +/* +** The VdbeCoverage macros are used to set a coverage testing point +** for VDBE branch instructions. The coverage testing points are line +** numbers in the sqlite3.c source file. VDBE branch coverage testing +** only works with an amalagmation build. That's ok since a VDBE branch +** coverage build designed for testing the test suite only. No application +** should ever ship with VDBE branch coverage measuring turned on. +** +** VdbeCoverage(v) // Mark the previously coded instruction +** // as a branch +** +** VdbeCoverageIf(v, conditional) // Mark previous if conditional true +** +** VdbeCoverageAlwaysTaken(v) // Previous branch is always taken +** +** VdbeCoverageNeverTaken(v) // Previous branch is never taken +** +** Every VDBE branch operation must be tagged with one of the macros above. +** If not, then when "make test" is run with -DSQLITE_VDBE_COVERAGE and +** -DSQLITE_DEBUG then an ALWAYS() will fail in the vdbeTakeBranch() +** routine in vdbe.c, alerting the developer to the missed tag. +*/ +#ifdef SQLITE_VDBE_COVERAGE +SQLITE_PRIVATE void sqlite3VdbeSetLineNumber(Vdbe*,int); +# define VdbeCoverage(v) sqlite3VdbeSetLineNumber(v,__LINE__) +# define VdbeCoverageIf(v,x) if(x)sqlite3VdbeSetLineNumber(v,__LINE__) +# define VdbeCoverageAlwaysTaken(v) sqlite3VdbeSetLineNumber(v,2); +# define VdbeCoverageNeverTaken(v) sqlite3VdbeSetLineNumber(v,1); +# define VDBE_OFFSET_LINENO(x) (__LINE__+x) +#else +# define VdbeCoverage(v) +# define VdbeCoverageIf(v,x) +# define VdbeCoverageAlwaysTaken(v) +# define VdbeCoverageNeverTaken(v) +# define VDBE_OFFSET_LINENO(x) 0 +#endif + +#endif + +/************** End of vdbe.h ************************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ -/************** Include mutex.h in the middle of sqliteInt.h *****************/ -/************** Begin file mutex.h *******************************************/ +/************** Include pager.h in the middle of sqliteInt.h *****************/ +/************** Begin file pager.h *******************************************/ /* -** 2007 August 28 +** 2001 September 15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -9191,3282 +9685,3662 @@ SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *); ** May you share freely, never taking more than you give. ** ************************************************************************* -** -** This file contains the common header for all mutex implementations. -** The sqliteInt.h header #includes this file so that it is available -** to all source files. We break it out in an effort to keep the code -** better organized. -** -** NOTE: source files should *not* #include this header file directly. -** Source files should #include the sqliteInt.h file and let that file -** include this one indirectly. +** This header file defines the interface that the sqlite page cache +** subsystem. The page cache subsystem reads and writes a file a page +** at a time and provides a journal for rollback. */ +#ifndef _PAGER_H_ +#define _PAGER_H_ /* -** Figure out what version of the code to use. The choices are -** -** SQLITE_MUTEX_OMIT No mutex logic. Not even stubs. The -** mutexes implemention cannot be overridden -** at start-time. -** -** SQLITE_MUTEX_NOOP For single-threaded applications. No -** mutual exclusion is provided. But this -** implementation can be overridden at -** start-time. -** -** SQLITE_MUTEX_PTHREADS For multi-threaded applications on Unix. -** -** SQLITE_MUTEX_W32 For multi-threaded applications on Win32. -** -** SQLITE_MUTEX_OS2 For multi-threaded applications on OS/2. +** Default maximum size for persistent journal files. A negative +** value means no limit. This value may be overridden using the +** sqlite3PagerJournalSizeLimit() API. See also "PRAGMA journal_size_limit". */ -#if !SQLITE_THREADSAFE -# define SQLITE_MUTEX_OMIT -#endif -#if SQLITE_THREADSAFE && !defined(SQLITE_MUTEX_NOOP) -# if SQLITE_OS_UNIX -# define SQLITE_MUTEX_PTHREADS -# elif SQLITE_OS_WIN -# define SQLITE_MUTEX_W32 -# elif SQLITE_OS_OS2 -# define SQLITE_MUTEX_OS2 -# else -# define SQLITE_MUTEX_NOOP -# endif +#ifndef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT + #define SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT -1 #endif -#ifdef SQLITE_MUTEX_OMIT /* -** If this is a no-op implementation, implement everything as macros. +** The type used to represent a page number. The first page in a file +** is called page 1. 0 is used to represent "not a page". */ -#define sqlite3_mutex_alloc(X) ((sqlite3_mutex*)8) -#define sqlite3_mutex_free(X) -#define sqlite3_mutex_enter(X) -#define sqlite3_mutex_try(X) SQLITE_OK -#define sqlite3_mutex_leave(X) -#define sqlite3_mutex_held(X) ((void)(X),1) -#define sqlite3_mutex_notheld(X) ((void)(X),1) -#define sqlite3MutexAlloc(X) ((sqlite3_mutex*)8) -#define sqlite3MutexInit() SQLITE_OK -#define sqlite3MutexEnd() -#endif /* defined(SQLITE_MUTEX_OMIT) */ - -/************** End of mutex.h ***********************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - +typedef u32 Pgno; /* -** Each database file to be accessed by the system is an instance -** of the following structure. There are normally two of these structures -** in the sqlite.aDb[] array. aDb[0] is the main database file and -** aDb[1] is the database file used to hold temporary tables. Additional -** databases may be attached. +** Each open file is managed by a separate instance of the "Pager" structure. */ -struct Db { - char *zName; /* Name of this database */ - Btree *pBt; /* The B*Tree structure for this database file */ - u8 inTrans; /* 0: not writable. 1: Transaction. 2: Checkpoint */ - u8 safety_level; /* How aggressive at syncing data to disk */ - Schema *pSchema; /* Pointer to database schema (possibly shared) */ -}; +typedef struct Pager Pager; /* -** An instance of the following structure stores a database schema. -** -** Most Schema objects are associated with a Btree. The exception is -** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing. -** In shared cache mode, a single Schema object can be shared by multiple -** Btrees that refer to the same underlying BtShared object. -** -** Schema objects are automatically deallocated when the last Btree that -** references them is destroyed. The TEMP Schema is manually freed by -** sqlite3_close(). -* -** A thread must be holding a mutex on the corresponding Btree in order -** to access Schema content. This implies that the thread must also be -** holding a mutex on the sqlite3 connection pointer that owns the Btree. -** For a TEMP Schema, only the connection mutex is required. +** Handle type for pages. */ -struct Schema { - int schema_cookie; /* Database schema version number for this file */ - int iGeneration; /* Generation counter. Incremented with each change */ - Hash tblHash; /* All tables indexed by name */ - Hash idxHash; /* All (named) indices indexed by name */ - Hash trigHash; /* All triggers indexed by name */ - Hash fkeyHash; /* All foreign keys by referenced table name */ - Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ - u8 file_format; /* Schema format version for this file */ - u8 enc; /* Text encoding used by this database */ - u16 flags; /* Flags associated with this schema */ - int cache_size; /* Number of pages to use in the cache */ -}; +typedef struct PgHdr DbPage; /* -** These macros can be used to test, set, or clear bits in the -** Db.pSchema->flags field. +** Page number PAGER_MJ_PGNO is never used in an SQLite database (it is +** reserved for working around a windows/posix incompatibility). It is +** used in the journal to signify that the remainder of the journal file +** is devoted to storing a master journal name - there are no more pages to +** roll back. See comments for function writeMasterJournal() in pager.c +** for details. */ -#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))==(P)) -#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))!=0) -#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->flags|=(P) -#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->flags&=~(P) +#define PAGER_MJ_PGNO(x) ((Pgno)((PENDING_BYTE/((x)->pageSize))+1)) /* -** Allowed values for the DB.pSchema->flags field. -** -** The DB_SchemaLoaded flag is set after the database schema has been -** read into internal hash tables. +** Allowed values for the flags parameter to sqlite3PagerOpen(). ** -** DB_UnresetViews means that one or more views have column names that -** have been filled out. If the schema changes, these column names might -** changes and so the view will need to be reset. +** NOTE: These values must match the corresponding BTREE_ values in btree.h. */ -#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ -#define DB_UnresetViews 0x0002 /* Some views have defined column names */ -#define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ +#define PAGER_OMIT_JOURNAL 0x0001 /* Do not use a rollback journal */ +#define PAGER_MEMORY 0x0002 /* In-memory database */ /* -** The number of different kinds of things that can be limited -** using the sqlite3_limit() interface. +** Valid values for the second argument to sqlite3PagerLockingMode(). */ -#define SQLITE_N_LIMIT (SQLITE_LIMIT_TRIGGER_DEPTH+1) +#define PAGER_LOCKINGMODE_QUERY -1 +#define PAGER_LOCKINGMODE_NORMAL 0 +#define PAGER_LOCKINGMODE_EXCLUSIVE 1 /* -** Lookaside malloc is a set of fixed-size buffers that can be used -** to satisfy small transient memory allocation requests for objects -** associated with a particular database connection. The use of -** lookaside malloc provides a significant performance enhancement -** (approx 10%) by avoiding numerous malloc/free requests while parsing -** SQL statements. -** -** The Lookaside structure holds configuration information about the -** lookaside malloc subsystem. Each available memory allocation in -** the lookaside subsystem is stored on a linked list of LookasideSlot -** objects. -** -** Lookaside allocations are only allowed for objects that are associated -** with a particular database connection. Hence, schema information cannot -** be stored in lookaside because in shared cache mode the schema information -** is shared by multiple database connections. Therefore, while parsing -** schema information, the Lookaside.bEnabled flag is cleared so that -** lookaside allocations are not used to construct the schema objects. +** Numeric constants that encode the journalmode. */ -struct Lookaside { - u16 sz; /* Size of each buffer in bytes */ - u8 bEnabled; /* False to disable new lookaside allocations */ - u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ - int nOut; /* Number of buffers currently checked out */ - int mxOut; /* Highwater mark for nOut */ - int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ - LookasideSlot *pFree; /* List of available buffers */ - void *pStart; /* First byte of available memory space */ - void *pEnd; /* First byte past end of available space */ -}; -struct LookasideSlot { - LookasideSlot *pNext; /* Next buffer in the list of free buffers */ -}; +#define PAGER_JOURNALMODE_QUERY (-1) /* Query the value of journalmode */ +#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */ +#define PAGER_JOURNALMODE_PERSIST 1 /* Commit by zeroing journal header */ +#define PAGER_JOURNALMODE_OFF 2 /* Journal omitted. */ +#define PAGER_JOURNALMODE_TRUNCATE 3 /* Commit by truncating journal */ +#define PAGER_JOURNALMODE_MEMORY 4 /* In-memory journal file */ +#define PAGER_JOURNALMODE_WAL 5 /* Use write-ahead logging */ /* -** A hash table for function definitions. -** -** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. -** Collisions are on the FuncDef.pHash chain. +** Flags that make up the mask passed to sqlite3PagerAcquire(). */ -struct FuncDefHash { - FuncDef *a[23]; /* Hash table for functions */ -}; +#define PAGER_GET_NOCONTENT 0x01 /* Do not load data from disk */ +#define PAGER_GET_READONLY 0x02 /* Read-only page is acceptable */ /* -** Each database connection is an instance of the following structure. -** -** The sqlite.lastRowid records the last insert rowid generated by an -** insert statement. Inserts on views do not affect its value. Each -** trigger has its own context, so that lastRowid can be updated inside -** triggers as usual. The previous value will be restored once the trigger -** exits. Upon entering a before or instead of trigger, lastRowid is no -** longer (since after version 2.8.12) reset to -1. -** -** The sqlite.nChange does not count changes within triggers and keeps no -** context. It is reset at start of sqlite3_exec. -** The sqlite.lsChange represents the number of changes made by the last -** insert, update, or delete statement. It remains constant throughout the -** length of a statement and is then updated by OP_SetCounts. It keeps a -** context stack just like lastRowid so that the count of changes -** within a trigger is not seen outside the trigger. Changes to views do not -** affect the value of lsChange. -** The sqlite.csChange keeps track of the number of current changes (since -** the last statement) and is used to update sqlite_lsChange. -** -** The member variables sqlite.errCode, sqlite.zErrMsg and sqlite.zErrMsg16 -** store the most recent error code and, if applicable, string. The -** internal function sqlite3Error() is used to set these variables -** consistently. +** Flags for sqlite3PagerSetFlags() */ -struct sqlite3 { - sqlite3_vfs *pVfs; /* OS Interface */ - int nDb; /* Number of backends currently in use */ - Db *aDb; /* All backends */ - int flags; /* Miscellaneous flags. See below */ - unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ - int errCode; /* Most recent error code (SQLITE_*) */ - int errMask; /* & result codes with this before returning */ - u8 autoCommit; /* The auto-commit flag. */ - u8 temp_store; /* 1: file 2: memory 0: default */ - u8 mallocFailed; /* True if we have seen a malloc failure */ - u8 dfltLockMode; /* Default locking-mode for attached dbs */ - signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */ - u8 suppressErr; /* Do not issue error messages if true */ - u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ - int nextPagesize; /* Pagesize after VACUUM if >0 */ - int nTable; /* Number of tables in the database */ - CollSeq *pDfltColl; /* The default collating sequence (BINARY) */ - i64 lastRowid; /* ROWID of most recent insert (see above) */ - u32 magic; /* Magic number for detect library misuse */ - int nChange; /* Value returned by sqlite3_changes() */ - int nTotalChange; /* Value returned by sqlite3_total_changes() */ - sqlite3_mutex *mutex; /* Connection mutex */ - int aLimit[SQLITE_N_LIMIT]; /* Limits */ - struct sqlite3InitInfo { /* Information used during initialization */ - int iDb; /* When back is being initialized */ - int newTnum; /* Rootpage of table being initialized */ - u8 busy; /* TRUE if currently initializing */ - u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */ - } init; - int nExtension; /* Number of loaded extensions */ - void **aExtension; /* Array of shared library handles */ - struct Vdbe *pVdbe; /* List of active virtual machines */ - int activeVdbeCnt; /* Number of VDBEs currently executing */ - int writeVdbeCnt; /* Number of active VDBEs that are writing */ - int vdbeExecCnt; /* Number of nested calls to VdbeExec() */ - void (*xTrace)(void*,const char*); /* Trace function */ - void *pTraceArg; /* Argument to the trace function */ - void (*xProfile)(void*,const char*,u64); /* Profiling function */ - void *pProfileArg; /* Argument to profile function */ - void *pCommitArg; /* Argument to xCommitCallback() */ - int (*xCommitCallback)(void*); /* Invoked at every commit. */ - void *pRollbackArg; /* Argument to xRollbackCallback() */ - void (*xRollbackCallback)(void*); /* Invoked at every commit. */ - void *pUpdateArg; - void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); +#define PAGER_SYNCHRONOUS_OFF 0x01 /* PRAGMA synchronous=OFF */ +#define PAGER_SYNCHRONOUS_NORMAL 0x02 /* PRAGMA synchronous=NORMAL */ +#define PAGER_SYNCHRONOUS_FULL 0x03 /* PRAGMA synchronous=FULL */ +#define PAGER_SYNCHRONOUS_MASK 0x03 /* Mask for three values above */ +#define PAGER_FULLFSYNC 0x04 /* PRAGMA fullfsync=ON */ +#define PAGER_CKPT_FULLFSYNC 0x08 /* PRAGMA checkpoint_fullfsync=ON */ +#define PAGER_CACHESPILL 0x10 /* PRAGMA cache_spill=ON */ +#define PAGER_FLAGS_MASK 0x1c /* All above except SYNCHRONOUS */ + +/* +** The remainder of this file contains the declarations of the functions +** that make up the Pager sub-system API. See source code comments for +** a detailed description of each routine. +*/ + +/* Open and close a Pager connection. */ +SQLITE_PRIVATE int sqlite3PagerOpen( + sqlite3_vfs*, + Pager **ppPager, + const char*, + int, + int, + int, + void(*)(DbPage*) +); +SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); + +/* Functions used to configure a Pager object. */ +SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *); +SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int); +SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int); +SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int); +SQLITE_PRIVATE void sqlite3PagerSetMmapLimit(Pager *, sqlite3_int64); +SQLITE_PRIVATE void sqlite3PagerShrink(Pager*); +SQLITE_PRIVATE void sqlite3PagerSetFlags(Pager*,unsigned); +SQLITE_PRIVATE int sqlite3PagerLockingMode(Pager *, int); +SQLITE_PRIVATE int sqlite3PagerSetJournalMode(Pager *, int); +SQLITE_PRIVATE int sqlite3PagerGetJournalMode(Pager*); +SQLITE_PRIVATE int sqlite3PagerOkToChangeJournalMode(Pager*); +SQLITE_PRIVATE i64 sqlite3PagerJournalSizeLimit(Pager *, i64); +SQLITE_PRIVATE sqlite3_backup **sqlite3PagerBackupPtr(Pager*); + +/* Functions used to obtain and release page references. */ +SQLITE_PRIVATE int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag); +#define sqlite3PagerGet(A,B,C) sqlite3PagerAcquire(A,B,C,0) +SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno); +SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); +SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); +SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*); + +/* Operations on page references. */ +SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); +SQLITE_PRIVATE void sqlite3PagerDontWrite(DbPage*); +SQLITE_PRIVATE int sqlite3PagerMovepage(Pager*,DbPage*,Pgno,int); +SQLITE_PRIVATE int sqlite3PagerPageRefcount(DbPage*); +SQLITE_PRIVATE void *sqlite3PagerGetData(DbPage *); +SQLITE_PRIVATE void *sqlite3PagerGetExtra(DbPage *); + +/* Functions used to manage pager transactions and savepoints. */ +SQLITE_PRIVATE void sqlite3PagerPagecount(Pager*, int*); +SQLITE_PRIVATE int sqlite3PagerBegin(Pager*, int exFlag, int); +SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne(Pager*,const char *zMaster, int); +SQLITE_PRIVATE int sqlite3PagerExclusiveLock(Pager*); +SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster); +SQLITE_PRIVATE int sqlite3PagerCommitPhaseTwo(Pager*); +SQLITE_PRIVATE int sqlite3PagerRollback(Pager*); +SQLITE_PRIVATE int sqlite3PagerOpenSavepoint(Pager *pPager, int n); +SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint); +SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager); + #ifndef SQLITE_OMIT_WAL - int (*xWalCallback)(void *, sqlite3 *, const char *, int); - void *pWalArg; -#endif - void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); - void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); - void *pCollNeededArg; - sqlite3_value *pErr; /* Most recent error message */ - char *zErrMsg; /* Most recent error message (UTF-8 encoded) */ - char *zErrMsg16; /* Most recent error message (UTF-16 encoded) */ - union { - volatile int isInterrupted; /* True if sqlite3_interrupt has been called */ - double notUsed1; /* Spacer */ - } u1; - Lookaside lookaside; /* Lookaside malloc configuration */ -#ifndef SQLITE_OMIT_AUTHORIZATION - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); - /* Access authorization function */ - void *pAuthArg; /* 1st argument to the access auth function */ +SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*); +SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen); +SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager); #endif -#ifndef SQLITE_OMIT_PROGRESS_CALLBACK - int (*xProgress)(void *); /* The progress callback */ - void *pProgressArg; /* Argument to the progress callback */ - int nProgressOps; /* Number of opcodes for progress callback */ + +#ifdef SQLITE_ENABLE_ZIPVFS +SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager); #endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - Hash aModule; /* populated by sqlite3_create_module() */ - VtabCtx *pVtabCtx; /* Context for active vtab connect/create */ - VTable **aVTrans; /* Virtual tables with open transactions */ - int nVTrans; /* Allocated size of aVTrans */ - VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ + +/* Functions used to query pager state and configuration. */ +SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*); +SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*); +SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*); +SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*, int); +SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager*); +SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*); +SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*); +SQLITE_PRIVATE int sqlite3PagerNosync(Pager*); +SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*); +SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*); +SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *); +SQLITE_PRIVATE void sqlite3PagerClearCache(Pager *); +SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *); + +/* Functions used to truncate the database file. */ +SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); + +#if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_WAL) +SQLITE_PRIVATE void *sqlite3PagerCodec(DbPage *); #endif - FuncDefHash aFunc; /* Hash table of connection functions */ - Hash aCollSeq; /* All collating sequences */ - BusyHandler busyHandler; /* Busy callback */ - int busyTimeout; /* Busy handler timeout, in msec */ - Db aDbStatic[2]; /* Static space for the 2 default backends */ - Savepoint *pSavepoint; /* List of active savepoints */ - int nSavepoint; /* Number of non-transaction savepoints */ - int nStatement; /* Number of nested statement-transactions */ - u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ - i64 nDeferredCons; /* Net deferred constraints this transaction. */ - int *pnBytesFreed; /* If not NULL, increment this in DbFree() */ -#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY - /* The following variables are all protected by the STATIC_MASTER - ** mutex, not by sqlite3.mutex. They are used by code in notify.c. - ** - ** When X.pUnlockConnection==Y, that means that X is waiting for Y to - ** unlock so that it can proceed. - ** - ** When X.pBlockingConnection==Y, that means that something that X tried - ** tried to do recently failed with an SQLITE_LOCKED error due to locks - ** held by Y. - */ - sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */ - sqlite3 *pUnlockConnection; /* Connection to watch for unlock */ - void *pUnlockArg; /* Argument to xUnlockNotify */ - void (*xUnlockNotify)(void **, int); /* Unlock notify callback */ - sqlite3 *pNextBlocked; /* Next in list of all blocked connections */ +/* Functions to support testing and debugging. */ +#if !defined(NDEBUG) || defined(SQLITE_TEST) +SQLITE_PRIVATE Pgno sqlite3PagerPagenumber(DbPage*); +SQLITE_PRIVATE int sqlite3PagerIswriteable(DbPage*); +#endif +#ifdef SQLITE_TEST +SQLITE_PRIVATE int *sqlite3PagerStats(Pager*); +SQLITE_PRIVATE void sqlite3PagerRefdump(Pager*); + void disable_simulated_io_errors(void); + void enable_simulated_io_errors(void); +#else +# define disable_simulated_io_errors() +# define enable_simulated_io_errors() #endif -}; -/* -** A macro to discover the encoding of a database. -*/ -#define ENC(db) ((db)->aDb[0].pSchema->enc) +#endif /* _PAGER_H_ */ +/************** End of pager.h ***********************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ +/************** Include pcache.h in the middle of sqliteInt.h ****************/ +/************** Begin file pcache.h ******************************************/ /* -** Possible values for the sqlite3.flags. +** 2008 August 05 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This header file defines the interface that the sqlite page cache +** subsystem. */ -#define SQLITE_VdbeTrace 0x00000100 /* True to trace VDBE execution */ -#define SQLITE_InternChanges 0x00000200 /* Uncommitted Hash table changes */ -#define SQLITE_FullColNames 0x00000400 /* Show full column names on SELECT */ -#define SQLITE_ShortColNames 0x00000800 /* Show short columns names */ -#define SQLITE_CountRows 0x00001000 /* Count rows changed by INSERT, */ - /* DELETE, or UPDATE and return */ - /* the count using a callback. */ -#define SQLITE_NullCallback 0x00002000 /* Invoke the callback once if the */ - /* result set is empty */ -#define SQLITE_SqlTrace 0x00004000 /* Debug print SQL as it executes */ -#define SQLITE_VdbeListing 0x00008000 /* Debug listings of VDBE programs */ -#define SQLITE_WriteSchema 0x00010000 /* OK to update SQLITE_MASTER */ -#define SQLITE_NoReadlock 0x00020000 /* Readlocks are omitted when - ** accessing read-only databases */ -#define SQLITE_IgnoreChecks 0x00040000 /* Do not enforce check constraints */ -#define SQLITE_ReadUncommitted 0x0080000 /* For shared-cache mode */ -#define SQLITE_LegacyFileFmt 0x00100000 /* Create new databases in format 1 */ -#define SQLITE_FullFSync 0x00200000 /* Use full fsync on the backend */ -#define SQLITE_CkptFullFSync 0x00400000 /* Use full fsync for checkpoint */ -#define SQLITE_RecoveryMode 0x00800000 /* Ignore schema errors */ -#define SQLITE_ReverseOrder 0x01000000 /* Reverse unordered SELECTs */ -#define SQLITE_RecTriggers 0x02000000 /* Enable recursive triggers */ -#define SQLITE_ForeignKeys 0x04000000 /* Enforce foreign key constraints */ -#define SQLITE_AutoIndex 0x08000000 /* Enable automatic indexes */ -#define SQLITE_PreferBuiltin 0x10000000 /* Preference to built-in funcs */ -#define SQLITE_LoadExtension 0x20000000 /* Enable load_extension */ -#define SQLITE_EnableTrigger 0x40000000 /* True to enable triggers */ - -/* -** Bits of the sqlite3.flags field that are used by the -** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface. -** These must be the low-order bits of the flags field. -*/ -#define SQLITE_QueryFlattener 0x01 /* Disable query flattening */ -#define SQLITE_ColumnCache 0x02 /* Disable the column cache */ -#define SQLITE_IndexSort 0x04 /* Disable indexes for sorting */ -#define SQLITE_IndexSearch 0x08 /* Disable indexes for searching */ -#define SQLITE_IndexCover 0x10 /* Disable index covering table */ -#define SQLITE_GroupByOrder 0x20 /* Disable GROUPBY cover of ORDERBY */ -#define SQLITE_FactorOutConst 0x40 /* Disable factoring out constants */ -#define SQLITE_IdxRealAsInt 0x80 /* Store REAL as INT in indices */ -#define SQLITE_OptMask 0xff /* Mask of all disablable opts */ -/* -** Possible values for the sqlite.magic field. -** The numbers are obtained at random and have no special meaning, other -** than being distinct from one another. -*/ -#define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */ -#define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */ -#define SQLITE_MAGIC_SICK 0x4b771290 /* Error and awaiting close */ -#define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */ -#define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */ +#ifndef _PCACHE_H_ -/* -** Each SQL function is defined by an instance of the following -** structure. A pointer to this structure is stored in the sqlite.aFunc -** hash table. When multiple functions have the same name, the hash table -** points to a linked list of these structures. -*/ -struct FuncDef { - i16 nArg; /* Number of arguments. -1 means unlimited */ - u8 iPrefEnc; /* Preferred text encoding (SQLITE_UTF8, 16LE, 16BE) */ - u8 flags; /* Some combination of SQLITE_FUNC_* */ - void *pUserData; /* User data parameter */ - FuncDef *pNext; /* Next function with same name */ - void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */ - void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */ - void (*xFinalize)(sqlite3_context*); /* Aggregate finalizer */ - char *zName; /* SQL name of the function. */ - FuncDef *pHash; /* Next with a different name but the same hash */ - FuncDestructor *pDestructor; /* Reference counted destructor function */ -}; +typedef struct PgHdr PgHdr; +typedef struct PCache PCache; /* -** This structure encapsulates a user-function destructor callback (as -** configured using create_function_v2()) and a reference counter. When -** create_function_v2() is called to create a function with a destructor, -** a single object of this type is allocated. FuncDestructor.nRef is set to -** the number of FuncDef objects created (either 1 or 3, depending on whether -** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor -** member of each of the new FuncDef objects is set to point to the allocated -** FuncDestructor. -** -** Thereafter, when one of the FuncDef objects is deleted, the reference -** count on this object is decremented. When it reaches 0, the destructor -** is invoked and the FuncDestructor structure freed. +** Every page in the cache is controlled by an instance of the following +** structure. */ -struct FuncDestructor { - int nRef; - void (*xDestroy)(void *); - void *pUserData; +struct PgHdr { + sqlite3_pcache_page *pPage; /* Pcache object page handle */ + void *pData; /* Page data */ + void *pExtra; /* Extra content */ + PgHdr *pDirty; /* Transient list of dirty pages */ + Pager *pPager; /* The pager this page is part of */ + Pgno pgno; /* Page number for this page */ +#ifdef SQLITE_CHECK_PAGES + u32 pageHash; /* Hash of page content */ +#endif + u16 flags; /* PGHDR flags defined below */ + + /********************************************************************** + ** Elements above are public. All that follows is private to pcache.c + ** and should not be accessed by other modules. + */ + i16 nRef; /* Number of users of this page */ + PCache *pCache; /* Cache that owns this page */ + + PgHdr *pDirtyNext; /* Next element in list of dirty pages */ + PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */ }; -/* -** Possible values for FuncDef.flags +/* Bit values for PgHdr.flags */ +#define PGHDR_DIRTY 0x002 /* Page has changed */ +#define PGHDR_NEED_SYNC 0x004 /* Fsync the rollback journal before + ** writing this page to the database */ +#define PGHDR_NEED_READ 0x008 /* Content is unread */ +#define PGHDR_REUSE_UNLIKELY 0x010 /* A hint that reuse is unlikely */ +#define PGHDR_DONT_WRITE 0x020 /* Do not write content to disk */ + +#define PGHDR_MMAP 0x040 /* This is an mmap page object */ + +/* Initialize and shutdown the page cache subsystem */ +SQLITE_PRIVATE int sqlite3PcacheInitialize(void); +SQLITE_PRIVATE void sqlite3PcacheShutdown(void); + +/* Page cache buffer management: +** These routines implement SQLITE_CONFIG_PAGECACHE. */ -#define SQLITE_FUNC_LIKE 0x01 /* Candidate for the LIKE optimization */ -#define SQLITE_FUNC_CASE 0x02 /* Case-sensitive LIKE-type function */ -#define SQLITE_FUNC_EPHEM 0x04 /* Ephemeral. Delete with VDBE */ -#define SQLITE_FUNC_NEEDCOLL 0x08 /* sqlite3GetFuncCollSeq() might be called */ -#define SQLITE_FUNC_PRIVATE 0x10 /* Allowed for internal use only */ -#define SQLITE_FUNC_COUNT 0x20 /* Built-in count(*) aggregate */ -#define SQLITE_FUNC_COALESCE 0x40 /* Built-in coalesce() or ifnull() function */ +SQLITE_PRIVATE void sqlite3PCacheBufferSetup(void *, int sz, int n); -/* -** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are -** used to create the initializers for the FuncDef structures. -** -** FUNCTION(zName, nArg, iArg, bNC, xFunc) -** Used to create a scalar function definition of a function zName -** implemented by C function xFunc that accepts nArg arguments. The -** value passed as iArg is cast to a (void*) and made available -** as the user-data (sqlite3_user_data()) for the function. If -** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set. -** -** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) -** Used to create an aggregate function definition implemented by -** the C functions xStep and xFinal. The first four parameters -** are interpreted in the same way as the first 4 parameters to -** FUNCTION(). -** -** LIKEFUNC(zName, nArg, pArg, flags) -** Used to create a scalar function definition of a function zName -** that accepts nArg arguments and is implemented by a call to C -** function likeFunc. Argument pArg is cast to a (void *) and made -** available as the function user-data (sqlite3_user_data()). The -** FuncDef.flags variable is set to the value passed as the flags -** parameter. +/* Create a new pager cache. +** Under memory stress, invoke xStress to try to make pages clean. +** Only clean and unpinned pages can be reclaimed. */ -#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0} -#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \ - pArg, 0, xFunc, 0, 0, #zName, 0, 0} -#define LIKEFUNC(zName, nArg, arg, flags) \ - {nArg, SQLITE_UTF8, flags, (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0} -#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ - {nArg, SQLITE_UTF8, nc*SQLITE_FUNC_NEEDCOLL, \ - SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0} +SQLITE_PRIVATE int sqlite3PcacheOpen( + int szPage, /* Size of every page */ + int szExtra, /* Extra space associated with each page */ + int bPurgeable, /* True if pages are on backing store */ + int (*xStress)(void*, PgHdr*), /* Call to try to make pages clean */ + void *pStress, /* Argument to xStress */ + PCache *pToInit /* Preallocated space for the PCache */ +); -/* -** All current savepoints are stored in a linked list starting at -** sqlite3.pSavepoint. The first element in the list is the most recently -** opened savepoint. Savepoints are added to the list by the vdbe -** OP_Savepoint instruction. +/* Modify the page-size after the cache has been created. */ +SQLITE_PRIVATE int sqlite3PcacheSetPageSize(PCache *, int); + +/* Return the size in bytes of a PCache object. Used to preallocate +** storage space. */ -struct Savepoint { - char *zName; /* Savepoint name (nul-terminated) */ - i64 nDeferredCons; /* Number of deferred fk violations */ - Savepoint *pNext; /* Parent savepoint (if any) */ -}; +SQLITE_PRIVATE int sqlite3PcacheSize(void); -/* -** The following are used as the second parameter to sqlite3Savepoint(), -** and as the P1 argument to the OP_Savepoint instruction. +/* One release per successful fetch. Page is pinned until released. +** Reference counted. */ -#define SAVEPOINT_BEGIN 0 -#define SAVEPOINT_RELEASE 1 -#define SAVEPOINT_ROLLBACK 2 +SQLITE_PRIVATE sqlite3_pcache_page *sqlite3PcacheFetch(PCache*, Pgno, int createFlag); +SQLITE_PRIVATE int sqlite3PcacheFetchStress(PCache*, Pgno, sqlite3_pcache_page**); +SQLITE_PRIVATE PgHdr *sqlite3PcacheFetchFinish(PCache*, Pgno, sqlite3_pcache_page *pPage); +SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr*); +SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr*); /* Remove page from cache */ +SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */ +SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */ +SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */ -/* -** Each SQLite module (virtual table definition) is defined by an -** instance of the following structure, stored in the sqlite3.aModule -** hash table. +/* Change a page number. Used by incr-vacuum. */ +SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno); + +/* Remove all pages with pgno>x. Reset the cache if x==0 */ +SQLITE_PRIVATE void sqlite3PcacheTruncate(PCache*, Pgno x); + +/* Get a list of all dirty pages in the cache, sorted by page number */ +SQLITE_PRIVATE PgHdr *sqlite3PcacheDirtyList(PCache*); + +/* Reset and close the cache object */ +SQLITE_PRIVATE void sqlite3PcacheClose(PCache*); + +/* Clear flags from pages of the page cache */ +SQLITE_PRIVATE void sqlite3PcacheClearSyncFlags(PCache *); + +/* Discard the contents of the cache */ +SQLITE_PRIVATE void sqlite3PcacheClear(PCache*); + +/* Return the total number of outstanding page references */ +SQLITE_PRIVATE int sqlite3PcacheRefCount(PCache*); + +/* Increment the reference count of an existing page */ +SQLITE_PRIVATE void sqlite3PcacheRef(PgHdr*); + +SQLITE_PRIVATE int sqlite3PcachePageRefcount(PgHdr*); + +/* Return the total number of pages stored in the cache */ +SQLITE_PRIVATE int sqlite3PcachePagecount(PCache*); + +#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) +/* Iterate through all dirty pages currently stored in the cache. This +** interface is only available if SQLITE_CHECK_PAGES is defined when the +** library is built. */ -struct Module { - const sqlite3_module *pModule; /* Callback pointers */ - const char *zName; /* Name passed to create_module() */ - void *pAux; /* pAux passed to create_module() */ - void (*xDestroy)(void *); /* Module destructor function */ -}; +SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *)); +#endif -/* -** information about each column of an SQL table is held in an instance -** of this structure. +/* Set and get the suggested cache-size for the specified pager-cache. +** +** If no global maximum is configured, then the system attempts to limit +** the total number of pages cached by purgeable pager-caches to the sum +** of the suggested cache-sizes. */ -struct Column { - char *zName; /* Name of this column */ - Expr *pDflt; /* Default value of this column */ - char *zDflt; /* Original text of the default value */ - char *zType; /* Data type for this column */ - char *zColl; /* Collating sequence. If NULL, use the default */ - u8 notNull; /* True if there is a NOT NULL constraint */ - u8 isPrimKey; /* True if this column is part of the PRIMARY KEY */ - char affinity; /* One of the SQLITE_AFF_... values */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - u8 isHidden; /* True if this column is 'hidden' */ +SQLITE_PRIVATE void sqlite3PcacheSetCachesize(PCache *, int); +#ifdef SQLITE_TEST +SQLITE_PRIVATE int sqlite3PcacheGetCachesize(PCache *); #endif -}; +/* Free up as much memory as possible from the page cache */ +SQLITE_PRIVATE void sqlite3PcacheShrink(PCache*); + +#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT +/* Try to return memory used by the pcache module to the main memory heap */ +SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int); +#endif + +#ifdef SQLITE_TEST +SQLITE_PRIVATE void sqlite3PcacheStats(int*,int*,int*,int*); +#endif + +SQLITE_PRIVATE void sqlite3PCacheSetDefault(void); + +#endif /* _PCACHE_H_ */ + +/************** End of pcache.h **********************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ + +/************** Include os.h in the middle of sqliteInt.h ********************/ +/************** Begin file os.h **********************************************/ /* -** A "Collating Sequence" is defined by an instance of the following -** structure. Conceptually, a collating sequence consists of a name and -** a comparison routine that defines the order of that sequence. +** 2001 September 16 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** There may two separate implementations of the collation function, one -** that processes text in UTF-8 encoding (CollSeq.xCmp) and another that -** processes text encoded in UTF-16 (CollSeq.xCmp16), using the machine -** native byte order. When a collation sequence is invoked, SQLite selects -** the version that will require the least expensive encoding -** translations, if any. +****************************************************************************** ** -** The CollSeq.pUser member variable is an extra parameter that passed in -** as the first argument to the UTF-8 comparison function, xCmp. -** CollSeq.pUser16 is the equivalent for the UTF-16 comparison function, -** xCmp16. +** This header file (together with is companion C source-code file +** "os.c") attempt to abstract the underlying operating system so that +** the SQLite library will work on both POSIX and windows systems. ** -** If both CollSeq.xCmp and CollSeq.xCmp16 are NULL, it means that the -** collating sequence is undefined. Indices built on an undefined -** collating sequence may not be read or written. +** This header file is #include-ed by sqliteInt.h and thus ends up +** being included by every source file. */ -struct CollSeq { - char *zName; /* Name of the collating sequence, UTF-8 encoded */ - u8 enc; /* Text encoding handled by xCmp() */ - u8 type; /* One of the SQLITE_COLL_... values below */ - void *pUser; /* First argument to xCmp() */ - int (*xCmp)(void*,int, const void*, int, const void*); - void (*xDel)(void*); /* Destructor for pUser */ -}; +#ifndef _SQLITE_OS_H_ +#define _SQLITE_OS_H_ /* -** Allowed values of CollSeq.type: +** Attempt to automatically detect the operating system and setup the +** necessary pre-processor macros for it. */ -#define SQLITE_COLL_BINARY 1 /* The default memcmp() collating sequence */ -#define SQLITE_COLL_NOCASE 2 /* The built-in NOCASE collating sequence */ -#define SQLITE_COLL_REVERSE 3 /* The built-in REVERSE collating sequence */ -#define SQLITE_COLL_USER 0 /* Any other user-defined collating sequence */ - +/************** Include os_setup.h in the middle of os.h *********************/ +/************** Begin file os_setup.h ****************************************/ /* -** A sort order can be either ASC or DESC. +** 2013 November 25 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains pre-processor directives related to operating system +** detection and/or setup. */ -#define SQLITE_SO_ASC 0 /* Sort in ascending order */ -#define SQLITE_SO_DESC 1 /* Sort in ascending order */ +#ifndef _OS_SETUP_H_ +#define _OS_SETUP_H_ /* -** Column affinity types. -** -** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and -** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve -** the speed a little by numbering the values consecutively. -** -** But rather than start with 0 or 1, we begin with 'a'. That way, -** when multiple affinity types are concatenated into a string and -** used as the P4 operand, they will be more readable. +** Figure out if we are dealing with Unix, Windows, or some other operating +** system. ** -** Note also that the numeric types are grouped together so that testing -** for a numeric type is a single comparison. +** After the following block of preprocess macros, all of SQLITE_OS_UNIX, +** SQLITE_OS_WIN, and SQLITE_OS_OTHER will defined to either 1 or 0. One of +** the three will be 1. The other two will be 0. */ -#define SQLITE_AFF_TEXT 'a' -#define SQLITE_AFF_NONE 'b' -#define SQLITE_AFF_NUMERIC 'c' -#define SQLITE_AFF_INTEGER 'd' -#define SQLITE_AFF_REAL 'e' +#if defined(SQLITE_OS_OTHER) +# if SQLITE_OS_OTHER==1 +# undef SQLITE_OS_UNIX +# define SQLITE_OS_UNIX 0 +# undef SQLITE_OS_WIN +# define SQLITE_OS_WIN 0 +# else +# undef SQLITE_OS_OTHER +# endif +#endif +#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER) +# define SQLITE_OS_OTHER 0 +# ifndef SQLITE_OS_WIN +# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || \ + defined(__MINGW32__) || defined(__BORLANDC__) +# define SQLITE_OS_WIN 1 +# define SQLITE_OS_UNIX 0 +# else +# define SQLITE_OS_WIN 0 +# define SQLITE_OS_UNIX 1 +# endif +# else +# define SQLITE_OS_UNIX 0 +# endif +#else +# ifndef SQLITE_OS_WIN +# define SQLITE_OS_WIN 0 +# endif +#endif -#define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) +#endif /* _OS_SETUP_H_ */ -/* -** The SQLITE_AFF_MASK values masks off the significant bits of an -** affinity value. +/************** End of os_setup.h ********************************************/ +/************** Continuing where we left off in os.h *************************/ + +/* If the SET_FULLSYNC macro is not defined above, then make it +** a no-op */ -#define SQLITE_AFF_MASK 0x67 +#ifndef SET_FULLSYNC +# define SET_FULLSYNC(x,y) +#endif /* -** Additional bit values that can be ORed with an affinity without -** changing the affinity. +** The default size of a disk sector */ -#define SQLITE_JUMPIFNULL 0x08 /* jumps if either operand is NULL */ -#define SQLITE_STOREP2 0x10 /* Store result in reg[P2] rather than jump */ -#define SQLITE_NULLEQ 0x80 /* NULL=NULL */ +#ifndef SQLITE_DEFAULT_SECTOR_SIZE +# define SQLITE_DEFAULT_SECTOR_SIZE 4096 +#endif /* -** An object of this type is created for each virtual table present in -** the database schema. -** -** If the database schema is shared, then there is one instance of this -** structure for each database connection (sqlite3*) that uses the shared -** schema. This is because each database connection requires its own unique -** instance of the sqlite3_vtab* handle used to access the virtual table -** implementation. sqlite3_vtab* handles can not be shared between -** database connections, even when the rest of the in-memory database -** schema is shared, as the implementation often stores the database -** connection handle passed to it via the xConnect() or xCreate() method -** during initialization internally. This database connection handle may -** then be used by the virtual table implementation to access real tables -** within the database. So that they appear as part of the callers -** transaction, these accesses need to be made via the same database -** connection as that used to execute SQL operations on the virtual table. +** Temporary files are named starting with this prefix followed by 16 random +** alphanumeric characters, and no file extension. They are stored in the +** OS's standard temporary file directory, and are deleted prior to exit. +** If sqlite is being embedded in another program, you may wish to change the +** prefix to reflect your program's name, so that if your program exits +** prematurely, old temporary files can be easily identified. This can be done +** using -DSQLITE_TEMP_FILE_PREFIX=myprefix_ on the compiler command line. ** -** All VTable objects that correspond to a single table in a shared -** database schema are initially stored in a linked-list pointed to by -** the Table.pVTable member variable of the corresponding Table object. -** When an sqlite3_prepare() operation is required to access the virtual -** table, it searches the list for the VTable that corresponds to the -** database connection doing the preparing so as to use the correct -** sqlite3_vtab* handle in the compiled query. +** 2006-10-31: The default prefix used to be "sqlite_". But then +** Mcafee started using SQLite in their anti-virus product and it +** started putting files with the "sqlite" name in the c:/temp folder. +** This annoyed many windows users. Those users would then do a +** Google search for "sqlite", find the telephone numbers of the +** developers and call to wake them up at night and complain. +** For this reason, the default name prefix is changed to be "sqlite" +** spelled backwards. So the temp files are still identified, but +** anybody smart enough to figure out the code is also likely smart +** enough to know that calling the developer will not help get rid +** of the file. +*/ +#ifndef SQLITE_TEMP_FILE_PREFIX +# define SQLITE_TEMP_FILE_PREFIX "etilqs_" +#endif + +/* +** The following values may be passed as the second argument to +** sqlite3OsLock(). The various locks exhibit the following semantics: ** -** When an in-memory Table object is deleted (for example when the -** schema is being reloaded for some reason), the VTable objects are not -** deleted and the sqlite3_vtab* handles are not xDisconnect()ed -** immediately. Instead, they are moved from the Table.pVTable list to -** another linked list headed by the sqlite3.pDisconnect member of the -** corresponding sqlite3 structure. They are then deleted/xDisconnected -** next time a statement is prepared using said sqlite3*. This is done -** to avoid deadlock issues involving multiple sqlite3.mutex mutexes. -** Refer to comments above function sqlite3VtabUnlockList() for an -** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect -** list without holding the corresponding sqlite3.mutex mutex. +** SHARED: Any number of processes may hold a SHARED lock simultaneously. +** RESERVED: A single process may hold a RESERVED lock on a file at +** any time. Other processes may hold and obtain new SHARED locks. +** PENDING: A single process may hold a PENDING lock on a file at +** any one time. Existing SHARED locks may persist, but no new +** SHARED locks may be obtained by other processes. +** EXCLUSIVE: An EXCLUSIVE lock precludes all other locks. ** -** The memory for objects of this type is always allocated by -** sqlite3DbMalloc(), using the connection handle stored in VTable.db as -** the first argument. +** PENDING_LOCK may not be passed directly to sqlite3OsLock(). Instead, a +** process that requests an EXCLUSIVE lock may actually obtain a PENDING +** lock. This can be upgraded to an EXCLUSIVE lock by a subsequent call to +** sqlite3OsLock(). */ -struct VTable { - sqlite3 *db; /* Database connection associated with this table */ - Module *pMod; /* Pointer to module implementation */ - sqlite3_vtab *pVtab; /* Pointer to vtab instance */ - int nRef; /* Number of pointers to this structure */ - u8 bConstraint; /* True if constraints are supported */ - int iSavepoint; /* Depth of the SAVEPOINT stack */ - VTable *pNext; /* Next in linked list (see above) */ -}; +#define NO_LOCK 0 +#define SHARED_LOCK 1 +#define RESERVED_LOCK 2 +#define PENDING_LOCK 3 +#define EXCLUSIVE_LOCK 4 /* -** Each SQL table is represented in memory by an instance of the -** following structure. +** File Locking Notes: (Mostly about windows but also some info for Unix) ** -** Table.zName is the name of the table. The case of the original -** CREATE TABLE statement is stored, but case is not significant for -** comparisons. +** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because +** those functions are not available. So we use only LockFile() and +** UnlockFile(). ** -** Table.nCol is the number of columns in this table. Table.aCol is a -** pointer to an array of Column structures, one for each column. +** LockFile() prevents not just writing but also reading by other processes. +** A SHARED_LOCK is obtained by locking a single randomly-chosen +** byte out of a specific range of bytes. The lock byte is obtained at +** random so two separate readers can probably access the file at the +** same time, unless they are unlucky and choose the same lock byte. +** An EXCLUSIVE_LOCK is obtained by locking all bytes in the range. +** There can only be one writer. A RESERVED_LOCK is obtained by locking +** a single byte of the file that is designated as the reserved lock byte. +** A PENDING_LOCK is obtained by locking a designated byte different from +** the RESERVED_LOCK byte. ** -** If the table has an INTEGER PRIMARY KEY, then Table.iPKey is the index of -** the column that is that key. Otherwise Table.iPKey is negative. Note -** that the datatype of the PRIMARY KEY must be INTEGER for this field to -** be set. An INTEGER PRIMARY KEY is used as the rowid for each row of -** the table. If a table has no INTEGER PRIMARY KEY, then a random rowid -** is generated for each row of the table. TF_HasPrimaryKey is set if -** the table has any PRIMARY KEY, INTEGER or otherwise. +** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available, +** which means we can use reader/writer locks. When reader/writer locks +** are used, the lock is placed on the same range of bytes that is used +** for probabilistic locking in Win95/98/ME. Hence, the locking scheme +** will support two or more Win95 readers or two or more WinNT readers. +** But a single Win95 reader will lock out all WinNT readers and a single +** WinNT reader will lock out all other Win95 readers. +** +** The following #defines specify the range of bytes used for locking. +** SHARED_SIZE is the number of bytes available in the pool from which +** a random byte is selected for a shared lock. The pool of bytes for +** shared locks begins at SHARED_FIRST. +** +** The same locking strategy and +** byte ranges are used for Unix. This leaves open the possibility of having +** clients on win95, winNT, and unix all talking to the same shared file +** and all locking correctly. To do so would require that samba (or whatever +** tool is being used for file sharing) implements locks correctly between +** windows and unix. I'm guessing that isn't likely to happen, but by +** using the same locking range we are at least open to the possibility. +** +** Locking in windows is manditory. For this reason, we cannot store +** actual data in the bytes used for locking. The pager never allocates +** the pages involved in locking therefore. SHARED_SIZE is selected so +** that all locks will fit on a single page even at the minimum page size. +** PENDING_BYTE defines the beginning of the locks. By default PENDING_BYTE +** is set high so that we don't have to allocate an unused page except +** for very large databases. But one should test the page skipping logic +** by setting PENDING_BYTE low and running the entire regression suite. +** +** Changing the value of PENDING_BYTE results in a subtly incompatible +** file format. Depending on how it is changed, you might not notice +** the incompatibility right away, even running a full regression test. +** The default location of PENDING_BYTE is the first byte past the +** 1GB boundary. ** -** Table.tnum is the page number for the root BTree page of the table in the -** database file. If Table.iDb is the index of the database table backend -** in sqlite.aDb[]. 0 is for the main database and 1 is for the file that -** holds temporary tables and indices. If TF_Ephemeral is set -** then the table is stored in a file that is automatically deleted -** when the VDBE cursor to the table is closed. In this case Table.tnum -** refers VDBE cursor number that holds the table open, not to the root -** page number. Transient tables are used to hold the results of a -** sub-query that appears instead of a real table name in the FROM clause -** of a SELECT statement. */ -struct Table { - char *zName; /* Name of the table or view */ - int iPKey; /* If not negative, use aCol[iPKey] as the primary key */ - int nCol; /* Number of columns in this table */ - Column *aCol; /* Information about each column */ - Index *pIndex; /* List of SQL indexes on this table. */ - int tnum; /* Root BTree node for this table (see note above) */ - unsigned nRowEst; /* Estimated rows in table - from sqlite_stat1 table */ - Select *pSelect; /* NULL for tables. Points to definition if a view. */ - u16 nRef; /* Number of pointers to this Table */ - u8 tabFlags; /* Mask of TF_* values */ - u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ - FKey *pFKey; /* Linked list of all foreign keys in this table */ - char *zColAff; /* String defining the affinity of each column */ -#ifndef SQLITE_OMIT_CHECK - Expr *pCheck; /* The AND of all CHECK constraints */ -#endif -#ifndef SQLITE_OMIT_ALTERTABLE - int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */ -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - VTable *pVTable; /* List of VTable objects. */ - int nModuleArg; /* Number of arguments to the module */ - char **azModuleArg; /* Text of all module args. [0] is module name */ +#ifdef SQLITE_OMIT_WSD +# define PENDING_BYTE (0x40000000) +#else +# define PENDING_BYTE sqlite3PendingByte #endif - Trigger *pTrigger; /* List of triggers stored in pSchema */ - Schema *pSchema; /* Schema that contains this table */ - Table *pNextZombie; /* Next on the Parse.pZombieTab list */ -}; +#define RESERVED_BYTE (PENDING_BYTE+1) +#define SHARED_FIRST (PENDING_BYTE+2) +#define SHARED_SIZE 510 /* -** Allowed values for Tabe.tabFlags. +** Wrapper around OS specific sqlite3_os_init() function. */ -#define TF_Readonly 0x01 /* Read-only system table */ -#define TF_Ephemeral 0x02 /* An ephemeral table */ -#define TF_HasPrimaryKey 0x04 /* Table has a primary key */ -#define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */ -#define TF_Virtual 0x10 /* Is a virtual table */ -#define TF_NeedMetadata 0x20 /* aCol[].zType and aCol[].pColl missing */ +SQLITE_PRIVATE int sqlite3OsInit(void); + +/* +** Functions for accessing sqlite3_file methods +*/ +SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file*); +SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset); +SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset); +SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size); +SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file*, int); +SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file*, i64 *pSize); +SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file*, int); +SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file*, int); +SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut); +SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file*,int,void*); +SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file*,int,void*); +#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0 +SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id); +SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id); +SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **); +SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int); +SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id); +SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int); +SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **); +SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *); +/* +** Functions for accessing sqlite3_vfs methods +*/ +SQLITE_PRIVATE int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *); +SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *, const char *, int); +SQLITE_PRIVATE int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut); +SQLITE_PRIVATE int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *); +#ifndef SQLITE_OMIT_LOAD_EXTENSION +SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *, const char *); +SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *, int, char *); +SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void); +SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *, void *); +#endif /* SQLITE_OMIT_LOAD_EXTENSION */ +SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *); +SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int); +SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*); /* -** Test to see whether or not a table is a virtual table. This is -** done as a macro so that it will be optimized out when virtual -** table support is omitted from the build. +** Convenience functions for opening and closing files using +** sqlite3_malloc() to obtain space for the file-handle structure. */ -#ifndef SQLITE_OMIT_VIRTUALTABLE -# define IsVirtual(X) (((X)->tabFlags & TF_Virtual)!=0) -# define IsHiddenColumn(X) ((X)->isHidden) -#else -# define IsVirtual(X) 0 -# define IsHiddenColumn(X) 0 -#endif +SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*); +SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *); + +#endif /* _SQLITE_OS_H_ */ +/************** End of os.h **************************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ +/************** Include mutex.h in the middle of sqliteInt.h *****************/ +/************** Begin file mutex.h *******************************************/ /* -** Each foreign key constraint is an instance of the following structure. +** 2007 August 28 ** -** A foreign key is associated with two tables. The "from" table is -** the table that contains the REFERENCES clause that creates the foreign -** key. The "to" table is the table that is named in the REFERENCES clause. -** Consider this example: +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** CREATE TABLE ex1( -** a INTEGER PRIMARY KEY, -** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x) -** ); +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". +************************************************************************* ** -** Each REFERENCES clause generates an instance of the following structure -** which is attached to the from-table. The to-table need not exist when -** the from-table is created. The existence of the to-table is not checked. +** This file contains the common header for all mutex implementations. +** The sqliteInt.h header #includes this file so that it is available +** to all source files. We break it out in an effort to keep the code +** better organized. +** +** NOTE: source files should *not* #include this header file directly. +** Source files should #include the sqliteInt.h file and let that file +** include this one indirectly. */ -struct FKey { - Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */ - FKey *pNextFrom; /* Next foreign key in pFrom */ - char *zTo; /* Name of table that the key points to (aka: Parent) */ - FKey *pNextTo; /* Next foreign key on table named zTo */ - FKey *pPrevTo; /* Previous foreign key on table named zTo */ - int nCol; /* Number of columns in this key */ - /* EV: R-30323-21917 */ - u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ - u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ - Trigger *apTrigger[2]; /* Triggers for aAction[] actions */ - struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ - int iFrom; /* Index of column in pFrom */ - char *zCol; /* Name of column in zTo. If 0 use PRIMARY KEY */ - } aCol[1]; /* One entry for each of nCol column s */ -}; + /* -** SQLite supports many different ways to resolve a constraint -** error. ROLLBACK processing means that a constraint violation -** causes the operation in process to fail and for the current transaction -** to be rolled back. ABORT processing means the operation in process -** fails and any prior changes from that one operation are backed out, -** but the transaction is not rolled back. FAIL processing means that -** the operation in progress stops and returns an error code. But prior -** changes due to the same operation are not backed out and no rollback -** occurs. IGNORE means that the particular row that caused the constraint -** error is not inserted or updated. Processing continues and no error -** is returned. REPLACE means that preexisting database rows that caused -** a UNIQUE constraint violation are removed so that the new insert or -** update can proceed. Processing continues and no error is reported. +** Figure out what version of the code to use. The choices are ** -** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys. -** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the -** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign -** key is set to NULL. CASCADE means that a DELETE or UPDATE of the -** referenced table row is propagated into the row that holds the -** foreign key. -** -** The following symbolic values are used to record which type -** of action to take. +** SQLITE_MUTEX_OMIT No mutex logic. Not even stubs. The +** mutexes implementation cannot be overridden +** at start-time. +** +** SQLITE_MUTEX_NOOP For single-threaded applications. No +** mutual exclusion is provided. But this +** implementation can be overridden at +** start-time. +** +** SQLITE_MUTEX_PTHREADS For multi-threaded applications on Unix. +** +** SQLITE_MUTEX_W32 For multi-threaded applications on Win32. */ -#define OE_None 0 /* There is no constraint to check */ -#define OE_Rollback 1 /* Fail the operation and rollback the transaction */ -#define OE_Abort 2 /* Back out changes but do no rollback transaction */ -#define OE_Fail 3 /* Stop the operation but leave all prior changes */ -#define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ -#define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ +#if !SQLITE_THREADSAFE +# define SQLITE_MUTEX_OMIT +#endif +#if SQLITE_THREADSAFE && !defined(SQLITE_MUTEX_NOOP) +# if SQLITE_OS_UNIX +# define SQLITE_MUTEX_PTHREADS +# elif SQLITE_OS_WIN +# define SQLITE_MUTEX_W32 +# else +# define SQLITE_MUTEX_NOOP +# endif +#endif -#define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ -#define OE_SetNull 7 /* Set the foreign key value to NULL */ -#define OE_SetDflt 8 /* Set the foreign key value to its default */ -#define OE_Cascade 9 /* Cascade the changes */ +#ifdef SQLITE_MUTEX_OMIT +/* +** If this is a no-op implementation, implement everything as macros. +*/ +#define sqlite3_mutex_alloc(X) ((sqlite3_mutex*)8) +#define sqlite3_mutex_free(X) +#define sqlite3_mutex_enter(X) +#define sqlite3_mutex_try(X) SQLITE_OK +#define sqlite3_mutex_leave(X) +#define sqlite3_mutex_held(X) ((void)(X),1) +#define sqlite3_mutex_notheld(X) ((void)(X),1) +#define sqlite3MutexAlloc(X) ((sqlite3_mutex*)8) +#define sqlite3MutexInit() SQLITE_OK +#define sqlite3MutexEnd() +#define MUTEX_LOGIC(X) +#else +#define MUTEX_LOGIC(X) X +#endif /* defined(SQLITE_MUTEX_OMIT) */ -#define OE_Default 99 /* Do whatever the default action is */ +/************** End of mutex.h ***********************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ /* -** An instance of the following structure is passed as the first -** argument to sqlite3VdbeKeyCompare and is used to control the -** comparison of the two index keys. +** Each database file to be accessed by the system is an instance +** of the following structure. There are normally two of these structures +** in the sqlite.aDb[] array. aDb[0] is the main database file and +** aDb[1] is the database file used to hold temporary tables. Additional +** databases may be attached. */ -struct KeyInfo { - sqlite3 *db; /* The database connection */ - u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ - u16 nField; /* Number of entries in aColl[] */ - u8 *aSortOrder; /* Sort order for each column. May be NULL */ - CollSeq *aColl[1]; /* Collating sequence for each term of the key */ +struct Db { + char *zName; /* Name of this database */ + Btree *pBt; /* The B*Tree structure for this database file */ + u8 safety_level; /* How aggressive at syncing data to disk */ + Schema *pSchema; /* Pointer to database schema (possibly shared) */ }; /* -** An instance of the following structure holds information about a -** single index record that has already been parsed out into individual -** values. -** -** A record is an object that contains one or more fields of data. -** Records are used to store the content of a table row and to store -** the key of an index. A blob encoding of a record is created by -** the OP_MakeRecord opcode of the VDBE and is disassembled by the -** OP_Column opcode. +** An instance of the following structure stores a database schema. ** -** This structure holds a record that has already been disassembled -** into its constituent fields. +** Most Schema objects are associated with a Btree. The exception is +** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing. +** In shared cache mode, a single Schema object can be shared by multiple +** Btrees that refer to the same underlying BtShared object. +** +** Schema objects are automatically deallocated when the last Btree that +** references them is destroyed. The TEMP Schema is manually freed by +** sqlite3_close(). +* +** A thread must be holding a mutex on the corresponding Btree in order +** to access Schema content. This implies that the thread must also be +** holding a mutex on the sqlite3 connection pointer that owns the Btree. +** For a TEMP Schema, only the connection mutex is required. */ -struct UnpackedRecord { - KeyInfo *pKeyInfo; /* Collation and sort-order information */ - u16 nField; /* Number of entries in apMem[] */ - u16 flags; /* Boolean settings. UNPACKED_... below */ - i64 rowid; /* Used by UNPACKED_PREFIX_SEARCH */ - Mem *aMem; /* Values */ +struct Schema { + int schema_cookie; /* Database schema version number for this file */ + int iGeneration; /* Generation counter. Incremented with each change */ + Hash tblHash; /* All tables indexed by name */ + Hash idxHash; /* All (named) indices indexed by name */ + Hash trigHash; /* All triggers indexed by name */ + Hash fkeyHash; /* All foreign keys by referenced table name */ + Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ + u8 file_format; /* Schema format version for this file */ + u8 enc; /* Text encoding used by this database */ + u16 schemaFlags; /* Flags associated with this schema */ + int cache_size; /* Number of pages to use in the cache */ }; /* -** Allowed values of UnpackedRecord.flags +** These macros can be used to test, set, or clear bits in the +** Db.pSchema->flags field. */ -#define UNPACKED_NEED_FREE 0x0001 /* Memory is from sqlite3Malloc() */ -#define UNPACKED_NEED_DESTROY 0x0002 /* apMem[]s should all be destroyed */ -#define UNPACKED_IGNORE_ROWID 0x0004 /* Ignore trailing rowid on key1 */ -#define UNPACKED_INCRKEY 0x0008 /* Make this key an epsilon larger */ -#define UNPACKED_PREFIX_MATCH 0x0010 /* A prefix match is considered OK */ -#define UNPACKED_PREFIX_SEARCH 0x0020 /* A prefix match is considered OK */ +#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P)) +#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))!=0) +#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags|=(P) +#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags&=~(P) /* -** Each SQL index is represented in memory by an -** instance of the following structure. +** Allowed values for the DB.pSchema->flags field. ** -** The columns of the table that are to be indexed are described -** by the aiColumn[] field of this structure. For example, suppose -** we have the following table and index: +** The DB_SchemaLoaded flag is set after the database schema has been +** read into internal hash tables. ** -** CREATE TABLE Ex1(c1 int, c2 int, c3 text); -** CREATE INDEX Ex2 ON Ex1(c3,c1); +** DB_UnresetViews means that one or more views have column names that +** have been filled out. If the schema changes, these column names might +** changes and so the view will need to be reset. +*/ +#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ +#define DB_UnresetViews 0x0002 /* Some views have defined column names */ +#define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ + +/* +** The number of different kinds of things that can be limited +** using the sqlite3_limit() interface. +*/ +#define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1) + +/* +** Lookaside malloc is a set of fixed-size buffers that can be used +** to satisfy small transient memory allocation requests for objects +** associated with a particular database connection. The use of +** lookaside malloc provides a significant performance enhancement +** (approx 10%) by avoiding numerous malloc/free requests while parsing +** SQL statements. ** -** In the Table structure describing Ex1, nCol==3 because there are -** three columns in the table. In the Index structure describing -** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed. -** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the -** first column to be indexed (c3) has an index of 2 in Ex1.aCol[]. -** The second column to be indexed (c1) has an index of 0 in -** Ex1.aCol[], hence Ex2.aiColumn[1]==0. +** The Lookaside structure holds configuration information about the +** lookaside malloc subsystem. Each available memory allocation in +** the lookaside subsystem is stored on a linked list of LookasideSlot +** objects. ** -** The Index.onError field determines whether or not the indexed columns -** must be unique and what to do if they are not. When Index.onError=OE_None, -** it means this is not a unique index. Otherwise it is a unique index -** and the value of Index.onError indicate the which conflict resolution -** algorithm to employ whenever an attempt is made to insert a non-unique -** element. +** Lookaside allocations are only allowed for objects that are associated +** with a particular database connection. Hence, schema information cannot +** be stored in lookaside because in shared cache mode the schema information +** is shared by multiple database connections. Therefore, while parsing +** schema information, the Lookaside.bEnabled flag is cleared so that +** lookaside allocations are not used to construct the schema objects. */ -struct Index { - char *zName; /* Name of this index */ - int nColumn; /* Number of columns in the table used by this index */ - int *aiColumn; /* Which columns are used by this index. 1st is 0 */ - unsigned *aiRowEst; /* Result of ANALYZE: Est. rows selected by each column */ - Table *pTable; /* The SQL table being indexed */ - int tnum; /* Page containing root of this index in database file */ - u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ - u8 autoIndex; /* True if is automatically created (ex: by UNIQUE) */ - u8 bUnordered; /* Use this index for == or IN queries only */ - char *zColAff; /* String defining the affinity of each column */ - Index *pNext; /* The next index associated with the same table */ - Schema *pSchema; /* Schema containing this index */ - u8 *aSortOrder; /* Array of size Index.nColumn. True==DESC, False==ASC */ - char **azColl; /* Array of collation sequence names for index */ - IndexSample *aSample; /* Array of SQLITE_INDEX_SAMPLES samples */ +struct Lookaside { + u16 sz; /* Size of each buffer in bytes */ + u8 bEnabled; /* False to disable new lookaside allocations */ + u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ + int nOut; /* Number of buffers currently checked out */ + int mxOut; /* Highwater mark for nOut */ + int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + LookasideSlot *pFree; /* List of available buffers */ + void *pStart; /* First byte of available memory space */ + void *pEnd; /* First byte past end of available space */ +}; +struct LookasideSlot { + LookasideSlot *pNext; /* Next buffer in the list of free buffers */ }; /* -** Each sample stored in the sqlite_stat2 table is represented in memory -** using a structure of this type. +** A hash table for function definitions. +** +** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. +** Collisions are on the FuncDef.pHash chain. */ -struct IndexSample { - union { - char *z; /* Value if eType is SQLITE_TEXT or SQLITE_BLOB */ - double r; /* Value if eType is SQLITE_FLOAT or SQLITE_INTEGER */ - } u; - u8 eType; /* SQLITE_NULL, SQLITE_INTEGER ... etc. */ - u8 nByte; /* Size in byte of text or blob. */ +struct FuncDefHash { + FuncDef *a[23]; /* Hash table for functions */ }; +#ifdef SQLITE_USER_AUTHENTICATION /* -** Each token coming out of the lexer is an instance of -** this structure. Tokens are also used as part of an expression. -** -** Note if Token.z==0 then Token.dyn and Token.n are undefined and -** may contain random values. Do not make any assumptions about Token.dyn -** and Token.n when Token.z==0. +** Information held in the "sqlite3" database connection object and used +** to manage user authentication. */ -struct Token { - const char *z; /* Text of the token. Not NULL-terminated! */ - unsigned int n; /* Number of characters in this token */ +typedef struct sqlite3_userauth sqlite3_userauth; +struct sqlite3_userauth { + u8 authLevel; /* Current authentication level */ + int nAuthPW; /* Size of the zAuthPW in bytes */ + char *zAuthPW; /* Password used to authenticate */ + char *zAuthUser; /* User name used to authenticate */ }; -/* -** An instance of this structure contains information needed to generate -** code for a SELECT that contains aggregate functions. -** -** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a -** pointer to this structure. The Expr.iColumn field is the index in -** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate -** code for that node. -** -** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the -** original Select structure that describes the SELECT statement. These -** fields do not need to be freed when deallocating the AggInfo structure. -*/ -struct AggInfo { - u8 directMode; /* Direct rendering mode means take data directly - ** from source tables rather than from accumulators */ - u8 useSortingIdx; /* In direct mode, reference the sorting index rather - ** than the source table */ - int sortingIdx; /* Cursor number of the sorting index */ - ExprList *pGroupBy; /* The group by clause */ - int nSortingColumn; /* Number of columns in the sorting index */ - struct AggInfo_col { /* For each column used in source tables */ - Table *pTab; /* Source table */ - int iTable; /* Cursor number of the source table */ - int iColumn; /* Column number within the source table */ - int iSorterColumn; /* Column number in the sorting index */ - int iMem; /* Memory location that acts as accumulator */ - Expr *pExpr; /* The original expression */ - } *aCol; - int nColumn; /* Number of used entries in aCol[] */ - int nColumnAlloc; /* Number of slots allocated for aCol[] */ - int nAccumulator; /* Number of columns that show through to the output. - ** Additional columns are used only as parameters to - ** aggregate functions */ - struct AggInfo_func { /* For each aggregate function */ - Expr *pExpr; /* Expression encoding the function */ - FuncDef *pFunc; /* The aggregate function implementation */ - int iMem; /* Memory location that acts as accumulator */ - int iDistinct; /* Ephemeral table used to enforce DISTINCT */ - } *aFunc; - int nFunc; /* Number of entries in aFunc[] */ - int nFuncAlloc; /* Number of slots allocated for aFunc[] */ -}; +/* Allowed values for sqlite3_userauth.authLevel */ +#define UAUTH_Unknown 0 /* Authentication not yet checked */ +#define UAUTH_Fail 1 /* User authentication failed */ +#define UAUTH_User 2 /* Authenticated as a normal user */ +#define UAUTH_Admin 3 /* Authenticated as an administrator */ + +/* Functions used only by user authorization logic */ +SQLITE_PRIVATE int sqlite3UserAuthTable(const char*); +SQLITE_PRIVATE int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*); +SQLITE_PRIVATE void sqlite3UserAuthInit(sqlite3*); +SQLITE_PRIVATE void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**); + +#endif /* SQLITE_USER_AUTHENTICATION */ /* -** The datatype ynVar is a signed integer, either 16-bit or 32-bit. -** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater -** than 32767 we have to make it 32-bit. 16-bit is preferred because -** it uses less memory in the Expr object, which is a big memory user -** in systems with lots of prepared statements. And few applications -** need more than about 10 or 20 variables. But some extreme users want -** to have prepared statements with over 32767 variables, and for them -** the option is available (at compile-time). +** typedef for the authorization callback function. */ -#if SQLITE_MAX_VARIABLE_NUMBER<=32767 -typedef i16 ynVar; +#ifdef SQLITE_USER_AUTHENTICATION + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*, const char*); #else -typedef int ynVar; + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*); #endif + /* -** Each node of an expression in the parse tree is an instance -** of this structure. -** -** Expr.op is the opcode. The integer parser token codes are reused -** as opcodes here. For example, the parser defines TK_GE to be an integer -** code representing the ">=" operator. This same integer code is reused -** to represent the greater-than-or-equal-to operator in the expression -** tree. -** -** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, -** or TK_STRING), then Expr.token contains the text of the SQL literal. If -** the expression is a variable (TK_VARIABLE), then Expr.token contains the -** variable name. Finally, if the expression is an SQL function (TK_FUNCTION), -** then Expr.token contains the name of the function. -** -** Expr.pRight and Expr.pLeft are the left and right subexpressions of a -** binary operator. Either or both may be NULL. -** -** Expr.x.pList is a list of arguments if the expression is an SQL function, -** a CASE expression or an IN expression of the form " IN (, ...)". -** Expr.x.pSelect is used if the expression is a sub-select or an expression of -** the form " IN (SELECT ...)". If the EP_xIsSelect bit is set in the -** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is -** valid. -** -** An expression of the form ID or ID.ID refers to a column in a table. -** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is -** the integer cursor number of a VDBE cursor pointing to that table and -** Expr.iColumn is the column number for the specific column. If the -** expression is used as a result in an aggregate SELECT, then the -** value is also stored in the Expr.iAgg column in the aggregate so that -** it can be accessed after all aggregates are computed. -** -** If the expression is an unbound variable marker (a question mark -** character '?' in the original SQL) then the Expr.iTable holds the index -** number for that variable. -** -** If the expression is a subquery then Expr.iColumn holds an integer -** register number containing the result of the subquery. If the -** subquery gives a constant result, then iTable is -1. If the subquery -** gives a different answer at different times during statement processing -** then iTable is the address of a subroutine that computes the subquery. -** -** If the Expr is of type OP_Column, and the table it is selecting from -** is a disk table or the "old.*" pseudo-table, then pTab points to the -** corresponding table definition. -** -** ALLOCATION NOTES: -** -** Expr objects can use a lot of memory space in database schema. To -** help reduce memory requirements, sometimes an Expr object will be -** truncated. And to reduce the number of memory allocations, sometimes -** two or more Expr objects will be stored in a single memory allocation, -** together with Expr.zToken strings. -** -** If the EP_Reduced and EP_TokenOnly flags are set when -** an Expr object is truncated. When EP_Reduced is set, then all -** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees -** are contained within the same memory allocation. Note, however, that -** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately -** allocated, regardless of whether or not EP_Reduced is set. +** Each database connection is an instance of the following structure. */ -struct Expr { - u8 op; /* Operation performed by this node */ - char affinity; /* The affinity of the column or 0 if not a column */ - u16 flags; /* Various flags. EP_* See below */ - union { - char *zToken; /* Token value. Zero terminated and dequoted */ - int iValue; /* Non-negative integer value if EP_IntValue */ - } u; - - /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no - ** space is allocated for the fields below this point. An attempt to - ** access them will result in a segfault or malfunction. - *********************************************************************/ - - Expr *pLeft; /* Left subnode */ - Expr *pRight; /* Right subnode */ +struct sqlite3 { + sqlite3_vfs *pVfs; /* OS Interface */ + struct Vdbe *pVdbe; /* List of active virtual machines */ + CollSeq *pDfltColl; /* The default collating sequence (BINARY) */ + sqlite3_mutex *mutex; /* Connection mutex */ + Db *aDb; /* All backends */ + int nDb; /* Number of backends currently in use */ + int flags; /* Miscellaneous flags. See below */ + i64 lastRowid; /* ROWID of most recent insert (see above) */ + i64 szMmap; /* Default mmap_size setting */ + unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ + int errCode; /* Most recent error code (SQLITE_*) */ + int errMask; /* & result codes with this before returning */ + u16 dbOptFlags; /* Flags to enable/disable optimizations */ + u8 autoCommit; /* The auto-commit flag. */ + u8 temp_store; /* 1: file 2: memory 0: default */ + u8 mallocFailed; /* True if we have seen a malloc failure */ + u8 dfltLockMode; /* Default locking-mode for attached dbs */ + signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */ + u8 suppressErr; /* Do not issue error messages if true */ + u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ + u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ + int nextPagesize; /* Pagesize after VACUUM if >0 */ + u32 magic; /* Magic number for detect library misuse */ + int nChange; /* Value returned by sqlite3_changes() */ + int nTotalChange; /* Value returned by sqlite3_total_changes() */ + int aLimit[SQLITE_N_LIMIT]; /* Limits */ + int nMaxSorterMmap; /* Maximum size of regions mapped by sorter */ + struct sqlite3InitInfo { /* Information used during initialization */ + int newTnum; /* Rootpage of table being initialized */ + u8 iDb; /* Which db file is being initialized */ + u8 busy; /* TRUE if currently initializing */ + u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */ + } init; + int nVdbeActive; /* Number of VDBEs currently running */ + int nVdbeRead; /* Number of active VDBEs that read or write */ + int nVdbeWrite; /* Number of active VDBEs that read and write */ + int nVdbeExec; /* Number of nested calls to VdbeExec() */ + int nExtension; /* Number of loaded extensions */ + void **aExtension; /* Array of shared library handles */ + void (*xTrace)(void*,const char*); /* Trace function */ + void *pTraceArg; /* Argument to the trace function */ + void (*xProfile)(void*,const char*,u64); /* Profiling function */ + void *pProfileArg; /* Argument to profile function */ + void *pCommitArg; /* Argument to xCommitCallback() */ + int (*xCommitCallback)(void*); /* Invoked at every commit. */ + void *pRollbackArg; /* Argument to xRollbackCallback() */ + void (*xRollbackCallback)(void*); /* Invoked at every commit. */ + void *pUpdateArg; + void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); +#ifndef SQLITE_OMIT_WAL + int (*xWalCallback)(void *, sqlite3 *, const char *, int); + void *pWalArg; +#endif + void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); + void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); + void *pCollNeededArg; + sqlite3_value *pErr; /* Most recent error message */ union { - ExprList *pList; /* Function arguments or in " IN ( IN ( +** +** If the RHS of the IN operator is a list or a more complex subquery, then +** an ephemeral table might need to be generated from the RHS and then +** pX->iTable made to point to the ephemeral table instead of an +** existing table. +** +** The inFlags parameter must contain exactly one of the bits +** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP. If inFlags contains +** IN_INDEX_MEMBERSHIP, then the generated table will be used for a +** fast membership test. When the IN_INDEX_LOOP bit is set, the +** IN index will be used to loop over all values of the RHS of the +** IN operator. +** +** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate +** through the set members) then the b-tree must not contain duplicates. +** An epheremal table must be used unless the selected is guaranteed +** to be unique - either because it is an INTEGER PRIMARY KEY or it +** has a UNIQUE constraint or UNIQUE index. +** +** When IN_INDEX_MEMBERSHIP is used (and the b-tree will be used +** for fast set membership tests) then an epheremal table must +** be used unless is an INTEGER PRIMARY KEY or an index can +** be found with as its left-most column. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** If the IN_INDEX_NOOP_OK and IN_INDEX_MEMBERSHIP are both set and +** if the RHS of the IN operator is a list (not a subquery) then this +** routine might decide that creating an ephemeral b-tree for membership +** testing is too expensive and return IN_INDEX_NOOP. In that case, the +** calling routine should implement the IN operator using a sequence +** of Eq or Ne comparison operations. ** -************************************************************************* +** When the b-tree is being used for membership tests, the calling function +** might need to know whether or not the RHS side of the IN operator +** contains a NULL. If prRhsHasNull is not a NULL pointer and +** if there is any chance that the (...) might contain a NULL value at +** runtime, then a register is allocated and the register number written +** to *prRhsHasNull. If there is no chance that the (...) contains a +** NULL value, then *prRhsHasNull is left unchanged. ** -** This file contains code used to implement incremental BLOB I/O. +** If a register is allocated and its location stored in *prRhsHasNull, then +** the value in that register will be NULL if the b-tree contains one or more +** NULL values, and it will be some non-NULL value if the b-tree contains no +** NULL values. */ +#ifndef SQLITE_OMIT_SUBQUERY +SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, u32 inFlags, int *prRhsHasNull){ + Select *p; /* SELECT to the right of IN operator */ + int eType = 0; /* Type of RHS table. IN_INDEX_* */ + int iTab = pParse->nTab++; /* Cursor of the RHS table */ + int mustBeUnique; /* True if RHS must be unique */ + Vdbe *v = sqlite3GetVdbe(pParse); /* Virtual machine being coded */ + assert( pX->op==TK_IN ); + mustBeUnique = (inFlags & IN_INDEX_LOOP)!=0; -#ifndef SQLITE_OMIT_INCRBLOB + /* Check to see if an existing table or index can be used to + ** satisfy the query. This is preferable to generating a new + ** ephemeral table. + */ + p = (ExprHasProperty(pX, EP_xIsSelect) ? pX->x.pSelect : 0); + if( ALWAYS(pParse->nErr==0) && isCandidateForInOpt(p) ){ + sqlite3 *db = pParse->db; /* Database connection */ + Table *pTab; /* Table
. */ + Expr *pExpr; /* Expression */ + i16 iCol; /* Index of column */ + i16 iDb; /* Database idx for pTab */ + + assert( p ); /* Because of isCandidateForInOpt(p) */ + assert( p->pEList!=0 ); /* Because of isCandidateForInOpt(p) */ + assert( p->pEList->a[0].pExpr!=0 ); /* Because of isCandidateForInOpt(p) */ + assert( p->pSrc!=0 ); /* Because of isCandidateForInOpt(p) */ + pTab = p->pSrc->a[0].pTab; + pExpr = p->pEList->a[0].pExpr; + iCol = (i16)pExpr->iColumn; + + /* Code an OP_Transaction and OP_TableLock for
. */ + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); -/* -** Valid sqlite3_blob* handles point to Incrblob structures. -*/ -typedef struct Incrblob Incrblob; -struct Incrblob { - int flags; /* Copy of "flags" passed to sqlite3_blob_open() */ - int nByte; /* Size of open blob, in bytes */ - int iOffset; /* Byte offset of blob in cursor data */ - int iCol; /* Table column this handle is open on */ - BtCursor *pCsr; /* Cursor pointing at blob row */ - sqlite3_stmt *pStmt; /* Statement holding cursor open */ - sqlite3 *db; /* The associated database */ -}; + /* This function is only called from two places. In both cases the vdbe + ** has already been allocated. So assume sqlite3GetVdbe() is always + ** successful here. + */ + assert(v); + if( iCol<0 ){ + int iAddr = sqlite3CodeOnce(pParse); + VdbeCoverage(v); + sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); + eType = IN_INDEX_ROWID; -/* -** This function is used by both blob_open() and blob_reopen(). It seeks -** the b-tree cursor associated with blob handle p to point to row iRow. -** If successful, SQLITE_OK is returned and subsequent calls to -** sqlite3_blob_read() or sqlite3_blob_write() access the specified row. -** -** If an error occurs, or if the specified row does not exist or does not -** contain a value of type TEXT or BLOB in the column nominated when the -** blob handle was opened, then an error code is returned and *pzErr may -** be set to point to a buffer containing an error message. It is the -** responsibility of the caller to free the error message buffer using -** sqlite3DbFree(). -** -** If an error does occur, then the b-tree cursor is closed. All subsequent -** calls to sqlite3_blob_read(), blob_write() or blob_reopen() will -** immediately return SQLITE_ABORT. -*/ -static int blobSeekToRow(Incrblob *p, sqlite3_int64 iRow, char **pzErr){ - int rc; /* Error code */ - char *zErr = 0; /* Error message */ - Vdbe *v = (Vdbe *)p->pStmt; + sqlite3VdbeJumpHere(v, iAddr); + }else{ + Index *pIdx; /* Iterator variable */ - /* Set the value of the SQL statements only variable to integer iRow. - ** This is done directly instead of using sqlite3_bind_int64() to avoid - ** triggering asserts related to mutexes. - */ - assert( v->aVar[0].flags&MEM_Int ); - v->aVar[0].u.i = iRow; + /* The collation sequence used by the comparison. If an index is to + ** be used in place of a temp-table, it must be ordered according + ** to this collation sequence. */ + CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pExpr); - rc = sqlite3_step(p->pStmt); - if( rc==SQLITE_ROW ){ - u32 type = v->apCsr[0]->aType[p->iCol]; - if( type<12 ){ - zErr = sqlite3MPrintf(p->db, "cannot open value of type %s", - type==0?"null": type==7?"real": "integer" - ); - rc = SQLITE_ERROR; - sqlite3_finalize(p->pStmt); - p->pStmt = 0; - }else{ - p->iOffset = v->apCsr[0]->aOffset[p->iCol]; - p->nByte = sqlite3VdbeSerialTypeLen(type); - p->pCsr = v->apCsr[0]->pCursor; - sqlite3BtreeEnterCursor(p->pCsr); - sqlite3BtreeCacheOverflow(p->pCsr); - sqlite3BtreeLeaveCursor(p->pCsr); - } - } + /* Check that the affinity that will be used to perform the + ** comparison is the same as the affinity of the column. If + ** it is not, it is not possible to use any index. + */ + int affinity_ok = sqlite3IndexAffinityOk(pX, pTab->aCol[iCol].affinity); - if( rc==SQLITE_ROW ){ - rc = SQLITE_OK; - }else if( p->pStmt ){ - rc = sqlite3_finalize(p->pStmt); - p->pStmt = 0; - if( rc==SQLITE_OK ){ - zErr = sqlite3MPrintf(p->db, "no such rowid: %lld", iRow); - rc = SQLITE_ERROR; - }else{ - zErr = sqlite3MPrintf(p->db, "%s", sqlite3_errmsg(p->db)); + for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){ + if( (pIdx->aiColumn[0]==iCol) + && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq + && (!mustBeUnique || (pIdx->nKeyCol==1 && IsUniqueIndex(pIdx))) + ){ + int iAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); + VdbeComment((v, "%s", pIdx->zName)); + assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 ); + eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0]; + + if( prRhsHasNull && !pTab->aCol[iCol].notNull ){ + *prRhsHasNull = ++pParse->nMem; + sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull); + } + sqlite3VdbeJumpHere(v, iAddr); + } + } } } - assert( rc!=SQLITE_OK || zErr==0 ); - assert( rc!=SQLITE_ROW && rc!=SQLITE_DONE ); + /* If no preexisting index is available for the IN clause + ** and IN_INDEX_NOOP is an allowed reply + ** and the RHS of the IN operator is a list, not a subquery + ** and the RHS is not contant or has two or fewer terms, + ** then it is not worth creating an ephemeral table to evaluate + ** the IN operator so return IN_INDEX_NOOP. + */ + if( eType==0 + && (inFlags & IN_INDEX_NOOP_OK) + && !ExprHasProperty(pX, EP_xIsSelect) + && (!sqlite3InRhsIsConstant(pX) || pX->x.pList->nExpr<=2) + ){ + eType = IN_INDEX_NOOP; + } + - *pzErr = zErr; - return rc; + if( eType==0 ){ + /* Could not find an existing table or index to use as the RHS b-tree. + ** We will have to generate an ephemeral table to do the job. + */ + u32 savedNQueryLoop = pParse->nQueryLoop; + int rMayHaveNull = 0; + eType = IN_INDEX_EPH; + if( inFlags & IN_INDEX_LOOP ){ + pParse->nQueryLoop = 0; + if( pX->pLeft->iColumn<0 && !ExprHasProperty(pX, EP_xIsSelect) ){ + eType = IN_INDEX_ROWID; + } + }else if( prRhsHasNull ){ + *prRhsHasNull = rMayHaveNull = ++pParse->nMem; + } + sqlite3CodeSubselect(pParse, pX, rMayHaveNull, eType==IN_INDEX_ROWID); + pParse->nQueryLoop = savedNQueryLoop; + }else{ + pX->iTable = iTab; + } + return eType; } +#endif /* -** Open a blob handle. +** Generate code for scalar subqueries used as a subquery expression, EXISTS, +** or IN operators. Examples: +** +** (SELECT a FROM b) -- subquery +** EXISTS (SELECT a FROM b) -- EXISTS subquery +** x IN (4,5,11) -- IN operator with list on right-hand side +** x IN (SELECT a FROM b) -- IN operator with subquery on the right +** +** The pExpr parameter describes the expression that contains the IN +** operator or subquery. +** +** If parameter isRowid is non-zero, then expression pExpr is guaranteed +** to be of the form " IN (?, ?, ?)", where is a reference +** to some integer key column of a table B-Tree. In this case, use an +** intkey B-Tree to store the set of IN(...) values instead of the usual +** (slower) variable length keys B-Tree. +** +** If rMayHaveNull is non-zero, that means that the operation is an IN +** (not a SELECT or EXISTS) and that the RHS might contains NULLs. +** All this routine does is initialize the register given by rMayHaveNull +** to NULL. Calling routines will take care of changing this register +** value to non-NULL if the RHS is NULL-free. +** +** For a SELECT or EXISTS operator, return the register that holds the +** result. For IN operators or if an error occurs, the return value is 0. */ -SQLITE_API int sqlite3_blob_open( - sqlite3* db, /* The database connection */ - const char *zDb, /* The attached database containing the blob */ - const char *zTable, /* The table containing the blob */ - const char *zColumn, /* The column containing the blob */ - sqlite_int64 iRow, /* The row containing the glob */ - int flags, /* True -> read/write access, false -> read-only */ - sqlite3_blob **ppBlob /* Handle for accessing the blob returned here */ +#ifndef SQLITE_OMIT_SUBQUERY +SQLITE_PRIVATE int sqlite3CodeSubselect( + Parse *pParse, /* Parsing context */ + Expr *pExpr, /* The IN, SELECT, or EXISTS operator */ + int rHasNullFlag, /* Register that records whether NULLs exist in RHS */ + int isRowid /* If true, LHS of IN operator is a rowid */ ){ - int nAttempt = 0; - int iCol; /* Index of zColumn in row-record */ + int jmpIfDynamic = -1; /* One-time test address */ + int rReg = 0; /* Register storing resulting */ + Vdbe *v = sqlite3GetVdbe(pParse); + if( NEVER(v==0) ) return 0; + sqlite3ExprCachePush(pParse); - /* This VDBE program seeks a btree cursor to the identified - ** db/table/row entry. The reason for using a vdbe program instead - ** of writing code to use the b-tree layer directly is that the - ** vdbe program will take advantage of the various transaction, - ** locking and error handling infrastructure built into the vdbe. + /* This code must be run in its entirety every time it is encountered + ** if any of the following is true: ** - ** After seeking the cursor, the vdbe executes an OP_ResultRow. - ** Code external to the Vdbe then "borrows" the b-tree cursor and - ** uses it to implement the blob_read(), blob_write() and - ** blob_bytes() functions. + ** * The right-hand side is a correlated subquery + ** * The right-hand side is an expression list containing variables + ** * We are inside a trigger ** - ** The sqlite3_blob_close() function finalizes the vdbe program, - ** which closes the b-tree cursor and (possibly) commits the - ** transaction. + ** If all of the above are false, then we can run this code just once + ** save the results, and reuse the same result on subsequent invocations. */ - static const VdbeOpList openBlob[] = { - {OP_Transaction, 0, 0, 0}, /* 0: Start a transaction */ - {OP_VerifyCookie, 0, 0, 0}, /* 1: Check the schema cookie */ - {OP_TableLock, 0, 0, 0}, /* 2: Acquire a read or write lock */ + if( !ExprHasProperty(pExpr, EP_VarSelect) ){ + jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v); + } - /* One of the following two instructions is replaced by an OP_Noop. */ - {OP_OpenRead, 0, 0, 0}, /* 3: Open cursor 0 for reading */ - {OP_OpenWrite, 0, 0, 0}, /* 4: Open cursor 0 for read/write */ - - {OP_Variable, 1, 1, 1}, /* 5: Push the rowid to the stack */ - {OP_NotExists, 0, 10, 1}, /* 6: Seek the cursor */ - {OP_Column, 0, 0, 1}, /* 7 */ - {OP_ResultRow, 1, 0, 0}, /* 8 */ - {OP_Goto, 0, 5, 0}, /* 9 */ - {OP_Close, 0, 0, 0}, /* 10 */ - {OP_Halt, 0, 0, 0}, /* 11 */ - }; +#ifndef SQLITE_OMIT_EXPLAIN + if( pParse->explain==2 ){ + char *zMsg = sqlite3MPrintf( + pParse->db, "EXECUTE %s%s SUBQUERY %d", jmpIfDynamic>=0?"":"CORRELATED ", + pExpr->op==TK_IN?"LIST":"SCALAR", pParse->iNextSelectId + ); + sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); + } +#endif - int rc = SQLITE_OK; - char *zErr = 0; - Table *pTab; - Parse *pParse = 0; - Incrblob *pBlob = 0; + switch( pExpr->op ){ + case TK_IN: { + char affinity; /* Affinity of the LHS of the IN */ + int addr; /* Address of OP_OpenEphemeral instruction */ + Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */ + KeyInfo *pKeyInfo = 0; /* Key information */ - flags = !!flags; /* flags = (flags ? 1 : 0); */ - *ppBlob = 0; + affinity = sqlite3ExprAffinity(pLeft); - sqlite3_mutex_enter(db->mutex); + /* Whether this is an 'x IN(SELECT...)' or an 'x IN()' + ** expression it is handled the same way. An ephemeral table is + ** filled with single-field index keys representing the results + ** from the SELECT or the . + ** + ** If the 'x' expression is a column value, or the SELECT... + ** statement returns a column value, then the affinity of that + ** column is used to build the index keys. If both 'x' and the + ** SELECT... statement are columns, then numeric affinity is used + ** if either column has NUMERIC or INTEGER affinity. If neither + ** 'x' nor the SELECT... statement are columns, then numeric affinity + ** is used. + */ + pExpr->iTable = pParse->nTab++; + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pExpr->iTable, !isRowid); + pKeyInfo = isRowid ? 0 : sqlite3KeyInfoAlloc(pParse->db, 1, 1); - pBlob = (Incrblob *)sqlite3DbMallocZero(db, sizeof(Incrblob)); - if( !pBlob ) goto blob_open_out; - pParse = sqlite3StackAllocRaw(db, sizeof(*pParse)); - if( !pParse ) goto blob_open_out; + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + /* Case 1: expr IN (SELECT ...) + ** + ** Generate code to write the results of the select into the temporary + ** table allocated and opened above. + */ + Select *pSelect = pExpr->x.pSelect; + SelectDest dest; + ExprList *pEList; - do { - memset(pParse, 0, sizeof(Parse)); - pParse->db = db; - sqlite3DbFree(db, zErr); - zErr = 0; + assert( !isRowid ); + sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable); + dest.affSdst = (u8)affinity; + assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable ); + pSelect->iLimit = 0; + testcase( pSelect->selFlags & SF_Distinct ); + testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */ + if( sqlite3Select(pParse, pSelect, &dest) ){ + sqlite3KeyInfoUnref(pKeyInfo); + return 0; + } + pEList = pSelect->pEList; + assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */ + assert( pEList!=0 ); + assert( pEList->nExpr>0 ); + assert( sqlite3KeyInfoIsWriteable(pKeyInfo) ); + pKeyInfo->aColl[0] = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft, + pEList->a[0].pExpr); + }else if( ALWAYS(pExpr->x.pList!=0) ){ + /* Case 2: expr IN (exprlist) + ** + ** For each expression, build an index key from the evaluation and + ** store it in the temporary table. If is a column, then use + ** that columns affinity when building index keys. If is not + ** a column, use numeric affinity. + */ + int i; + ExprList *pList = pExpr->x.pList; + struct ExprList_item *pItem; + int r1, r2, r3; - sqlite3BtreeEnterAll(db); - pTab = sqlite3LocateTable(pParse, 0, zTable, zDb); - if( pTab && IsVirtual(pTab) ){ - pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open virtual table: %s", zTable); - } -#ifndef SQLITE_OMIT_VIEW - if( pTab && pTab->pSelect ){ - pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open view: %s", zTable); - } -#endif - if( !pTab ){ - if( pParse->zErrMsg ){ - sqlite3DbFree(db, zErr); - zErr = pParse->zErrMsg; - pParse->zErrMsg = 0; - } - rc = SQLITE_ERROR; - sqlite3BtreeLeaveAll(db); - goto blob_open_out; - } + if( !affinity ){ + affinity = SQLITE_AFF_NONE; + } + if( pKeyInfo ){ + assert( sqlite3KeyInfoIsWriteable(pKeyInfo) ); + pKeyInfo->aColl[0] = sqlite3ExprCollSeq(pParse, pExpr->pLeft); + } - /* Now search pTab for the exact column. */ - for(iCol=0; iColnCol; iCol++) { - if( sqlite3StrICmp(pTab->aCol[iCol].zName, zColumn)==0 ){ - break; - } - } - if( iCol==pTab->nCol ){ - sqlite3DbFree(db, zErr); - zErr = sqlite3MPrintf(db, "no such column: \"%s\"", zColumn); - rc = SQLITE_ERROR; - sqlite3BtreeLeaveAll(db); - goto blob_open_out; - } + /* Loop through each expression in . */ + r1 = sqlite3GetTempReg(pParse); + r2 = sqlite3GetTempReg(pParse); + if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2); + for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){ + Expr *pE2 = pItem->pExpr; + int iValToIns; - /* If the value is being opened for writing, check that the - ** column is not indexed, and that it is not part of a foreign key. - ** It is against the rules to open a column to which either of these - ** descriptions applies for writing. */ - if( flags ){ - const char *zFault = 0; - Index *pIdx; -#ifndef SQLITE_OMIT_FOREIGN_KEY - if( db->flags&SQLITE_ForeignKeys ){ - /* Check that the column is not part of an FK child key definition. It - ** is not necessary to check if it is part of a parent key, as parent - ** key columns must be indexed. The check below will pick up this - ** case. */ - FKey *pFKey; - for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){ - int j; - for(j=0; jnCol; j++){ - if( pFKey->aCol[j].iFrom==iCol ){ - zFault = "foreign key"; - } + /* If the expression is not constant then we will need to + ** disable the test that was generated above that makes sure + ** this code only executes once. Because for a non-constant + ** expression we need to rerun this code each time. + */ + if( jmpIfDynamic>=0 && !sqlite3ExprIsConstant(pE2) ){ + sqlite3VdbeChangeToNoop(v, jmpIfDynamic); + jmpIfDynamic = -1; } - } - } -#endif - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - int j; - for(j=0; jnColumn; j++){ - if( pIdx->aiColumn[j]==iCol ){ - zFault = "indexed"; + + /* Evaluate the expression and insert it into the temp table */ + if( isRowid && sqlite3ExprIsInteger(pE2, &iValToIns) ){ + sqlite3VdbeAddOp3(v, OP_InsertInt, pExpr->iTable, r2, iValToIns); + }else{ + r3 = sqlite3ExprCodeTarget(pParse, pE2, r1); + if( isRowid ){ + sqlite3VdbeAddOp2(v, OP_MustBeInt, r3, + sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Insert, pExpr->iTable, r2, r3); + }else{ + sqlite3VdbeAddOp4(v, OP_MakeRecord, r3, 1, r2, &affinity, 1); + sqlite3ExprCacheAffinityChange(pParse, r3, 1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, pExpr->iTable, r2); + } } } + sqlite3ReleaseTempReg(pParse, r1); + sqlite3ReleaseTempReg(pParse, r2); } - if( zFault ){ - sqlite3DbFree(db, zErr); - zErr = sqlite3MPrintf(db, "cannot open %s column for writing", zFault); - rc = SQLITE_ERROR; - sqlite3BtreeLeaveAll(db); - goto blob_open_out; + if( pKeyInfo ){ + sqlite3VdbeChangeP4(v, addr, (void *)pKeyInfo, P4_KEYINFO); } + break; } - pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(db); - assert( pBlob->pStmt || db->mallocFailed ); - if( pBlob->pStmt ){ - Vdbe *v = (Vdbe *)pBlob->pStmt; - int iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - - sqlite3VdbeAddOpList(v, sizeof(openBlob)/sizeof(VdbeOpList), openBlob); - - - /* Configure the OP_Transaction */ - sqlite3VdbeChangeP1(v, 0, iDb); - sqlite3VdbeChangeP2(v, 0, flags); - - /* Configure the OP_VerifyCookie */ - sqlite3VdbeChangeP1(v, 1, iDb); - sqlite3VdbeChangeP2(v, 1, pTab->pSchema->schema_cookie); - sqlite3VdbeChangeP3(v, 1, pTab->pSchema->iGeneration); - - /* Make sure a mutex is held on the table to be accessed */ - sqlite3VdbeUsesBtree(v, iDb); - - /* Configure the OP_TableLock instruction */ -#ifdef SQLITE_OMIT_SHARED_CACHE - sqlite3VdbeChangeToNoop(v, 2, 1); -#else - sqlite3VdbeChangeP1(v, 2, iDb); - sqlite3VdbeChangeP2(v, 2, pTab->tnum); - sqlite3VdbeChangeP3(v, 2, flags); - sqlite3VdbeChangeP4(v, 2, pTab->zName, P4_TRANSIENT); -#endif + case TK_EXISTS: + case TK_SELECT: + default: { + /* If this has to be a scalar SELECT. Generate code to put the + ** value of this select in a memory cell and record the number + ** of the memory cell in iColumn. If this is an EXISTS, write + ** an integer 0 (not exists) or 1 (exists) into a memory cell + ** and record that memory cell in iColumn. + */ + Select *pSel; /* SELECT statement to encode */ + SelectDest dest; /* How to deal with SELECt result */ - /* Remove either the OP_OpenWrite or OpenRead. Set the P2 - ** parameter of the other to pTab->tnum. */ - sqlite3VdbeChangeToNoop(v, 4 - flags, 1); - sqlite3VdbeChangeP2(v, 3 + flags, pTab->tnum); - sqlite3VdbeChangeP3(v, 3 + flags, iDb); + testcase( pExpr->op==TK_EXISTS ); + testcase( pExpr->op==TK_SELECT ); + assert( pExpr->op==TK_EXISTS || pExpr->op==TK_SELECT ); - /* Configure the number of columns. Configure the cursor to - ** think that the table has one more column than it really - ** does. An OP_Column to retrieve this imaginary column will - ** always return an SQL NULL. This is useful because it means - ** we can invoke OP_Column to fill in the vdbe cursors type - ** and offset cache without causing any IO. - */ - sqlite3VdbeChangeP4(v, 3+flags, SQLITE_INT_TO_PTR(pTab->nCol+1),P4_INT32); - sqlite3VdbeChangeP2(v, 7, pTab->nCol); - if( !db->mallocFailed ){ - pParse->nVar = 1; - pParse->nMem = 1; - pParse->nTab = 1; - sqlite3VdbeMakeReady(v, pParse); + assert( ExprHasProperty(pExpr, EP_xIsSelect) ); + pSel = pExpr->x.pSelect; + sqlite3SelectDestInit(&dest, 0, ++pParse->nMem); + if( pExpr->op==TK_SELECT ){ + dest.eDest = SRT_Mem; + dest.iSdst = dest.iSDParm; + sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iSDParm); + VdbeComment((v, "Init subquery result")); + }else{ + dest.eDest = SRT_Exists; + sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iSDParm); + VdbeComment((v, "Init EXISTS result")); } + sqlite3ExprDelete(pParse->db, pSel->pLimit); + pSel->pLimit = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, + &sqlite3IntTokens[1]); + pSel->iLimit = 0; + if( sqlite3Select(pParse, pSel, &dest) ){ + return 0; + } + rReg = dest.iSDParm; + ExprSetVVAProperty(pExpr, EP_NoReduce); + break; } - - pBlob->flags = flags; - pBlob->iCol = iCol; - pBlob->db = db; - sqlite3BtreeLeaveAll(db); - if( db->mallocFailed ){ - goto blob_open_out; - } - sqlite3_bind_int64(pBlob->pStmt, 1, iRow); - rc = blobSeekToRow(pBlob, iRow, &zErr); - } while( (++nAttempt)<5 && rc==SQLITE_SCHEMA ); - -blob_open_out: - if( rc==SQLITE_OK && db->mallocFailed==0 ){ - *ppBlob = (sqlite3_blob *)pBlob; - }else{ - if( pBlob && pBlob->pStmt ) sqlite3VdbeFinalize((Vdbe *)pBlob->pStmt); - sqlite3DbFree(db, pBlob); } - sqlite3Error(db, rc, (zErr ? "%s" : 0), zErr); - sqlite3DbFree(db, zErr); - sqlite3StackFree(db, pParse); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; -} -/* -** Close a blob handle that was previously created using -** sqlite3_blob_open(). -*/ -SQLITE_API int sqlite3_blob_close(sqlite3_blob *pBlob){ - Incrblob *p = (Incrblob *)pBlob; - int rc; - sqlite3 *db; + if( rHasNullFlag ){ + sqlite3SetHasNullFlag(v, pExpr->iTable, rHasNullFlag); + } - if( p ){ - db = p->db; - sqlite3_mutex_enter(db->mutex); - rc = sqlite3_finalize(p->pStmt); - sqlite3DbFree(db, p); - sqlite3_mutex_leave(db->mutex); - }else{ - rc = SQLITE_OK; + if( jmpIfDynamic>=0 ){ + sqlite3VdbeJumpHere(v, jmpIfDynamic); } - return rc; + sqlite3ExprCachePop(pParse); + + return rReg; } +#endif /* SQLITE_OMIT_SUBQUERY */ +#ifndef SQLITE_OMIT_SUBQUERY /* -** Perform a read or write operation on a blob +** Generate code for an IN expression. +** +** x IN (SELECT ...) +** x IN (value, value, ...) +** +** The left-hand side (LHS) is a scalar expression. The right-hand side (RHS) +** is an array of zero or more values. The expression is true if the LHS is +** contained within the RHS. The value of the expression is unknown (NULL) +** if the LHS is NULL or if the LHS is not contained within the RHS and the +** RHS contains one or more NULL values. +** +** This routine generates code that jumps to destIfFalse if the LHS is not +** contained within the RHS. If due to NULLs we cannot determine if the LHS +** is contained in the RHS then jump to destIfNull. If the LHS is contained +** within the RHS then fall through. */ -static int blobReadWrite( - sqlite3_blob *pBlob, - void *z, - int n, - int iOffset, - int (*xCall)(BtCursor*, u32, u32, void*) +static void sqlite3ExprCodeIN( + Parse *pParse, /* Parsing and code generating context */ + Expr *pExpr, /* The IN expression */ + int destIfFalse, /* Jump here if LHS is not contained in the RHS */ + int destIfNull /* Jump here if the results are unknown due to NULLs */ ){ - int rc; - Incrblob *p = (Incrblob *)pBlob; - Vdbe *v; - sqlite3 *db; + int rRhsHasNull = 0; /* Register that is true if RHS contains NULL values */ + char affinity; /* Comparison affinity to use */ + int eType; /* Type of the RHS */ + int r1; /* Temporary use register */ + Vdbe *v; /* Statement under construction */ - if( p==0 ) return SQLITE_MISUSE_BKPT; - db = p->db; - sqlite3_mutex_enter(db->mutex); - v = (Vdbe*)p->pStmt; + /* Compute the RHS. After this step, the table with cursor + ** pExpr->iTable will contains the values that make up the RHS. + */ + v = pParse->pVdbe; + assert( v!=0 ); /* OOM detected prior to this routine */ + VdbeNoopComment((v, "begin IN expr")); + eType = sqlite3FindInIndex(pParse, pExpr, + IN_INDEX_MEMBERSHIP | IN_INDEX_NOOP_OK, + destIfFalse==destIfNull ? 0 : &rRhsHasNull); - if( n<0 || iOffset<0 || (iOffset+n)>p->nByte ){ - /* Request is out of range. Return a transient error. */ - rc = SQLITE_ERROR; - sqlite3Error(db, SQLITE_ERROR, 0); - }else if( v==0 ){ - /* If there is no statement handle, then the blob-handle has - ** already been invalidated. Return SQLITE_ABORT in this case. - */ - rc = SQLITE_ABORT; + /* Figure out the affinity to use to create a key from the results + ** of the expression. affinityStr stores a static string suitable for + ** P4 of OP_MakeRecord. + */ + affinity = comparisonAffinity(pExpr); + + /* Code the LHS, the from " IN (...)". + */ + sqlite3ExprCachePush(pParse); + r1 = sqlite3GetTempReg(pParse); + sqlite3ExprCode(pParse, pExpr->pLeft, r1); + + /* If sqlite3FindInIndex() did not find or create an index that is + ** suitable for evaluating the IN operator, then evaluate using a + ** sequence of comparisons. + */ + if( eType==IN_INDEX_NOOP ){ + ExprList *pList = pExpr->x.pList; + CollSeq *pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft); + int labelOk = sqlite3VdbeMakeLabel(v); + int r2, regToFree; + int regCkNull = 0; + int ii; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + if( destIfNull!=destIfFalse ){ + regCkNull = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_BitAnd, r1, r1, regCkNull); + } + for(ii=0; iinExpr; ii++){ + r2 = sqlite3ExprCodeTemp(pParse, pList->a[ii].pExpr, ®ToFree); + if( regCkNull && sqlite3ExprCanBeNull(pList->a[ii].pExpr) ){ + sqlite3VdbeAddOp3(v, OP_BitAnd, regCkNull, r2, regCkNull); + } + if( iinExpr-1 || destIfNull!=destIfFalse ){ + sqlite3VdbeAddOp4(v, OP_Eq, r1, labelOk, r2, + (void*)pColl, P4_COLLSEQ); + VdbeCoverageIf(v, iinExpr-1); + VdbeCoverageIf(v, ii==pList->nExpr-1); + sqlite3VdbeChangeP5(v, affinity); + }else{ + assert( destIfNull==destIfFalse ); + sqlite3VdbeAddOp4(v, OP_Ne, r1, destIfFalse, r2, + (void*)pColl, P4_COLLSEQ); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, affinity | SQLITE_JUMPIFNULL); + } + sqlite3ReleaseTempReg(pParse, regToFree); + } + if( regCkNull ){ + sqlite3VdbeAddOp2(v, OP_IsNull, regCkNull, destIfNull); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); + } + sqlite3VdbeResolveLabel(v, labelOk); + sqlite3ReleaseTempReg(pParse, regCkNull); }else{ - /* Call either BtreeData() or BtreePutData(). If SQLITE_ABORT is - ** returned, clean-up the statement handle. + + /* If the LHS is NULL, then the result is either false or NULL depending + ** on whether the RHS is empty or not, respectively. */ - assert( db == v->db ); - sqlite3BtreeEnterCursor(p->pCsr); - rc = xCall(p->pCsr, iOffset+p->iOffset, n, z); - sqlite3BtreeLeaveCursor(p->pCsr); - if( rc==SQLITE_ABORT ){ - sqlite3VdbeFinalize(v); - p->pStmt = 0; + if( sqlite3ExprCanBeNull(pExpr->pLeft) ){ + if( destIfNull==destIfFalse ){ + /* Shortcut for the common case where the false and NULL outcomes are + ** the same. */ + sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v); + }else{ + int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull); + sqlite3VdbeJumpHere(v, addr1); + } + } + + if( eType==IN_INDEX_ROWID ){ + /* In this case, the RHS is the ROWID of table b-tree + */ + sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1); + VdbeCoverage(v); }else{ - db->errCode = rc; - v->rc = rc; + /* In this case, the RHS is an index b-tree. + */ + sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1); + + /* If the set membership test fails, then the result of the + ** "x IN (...)" expression must be either 0 or NULL. If the set + ** contains no NULL values, then the result is 0. If the set + ** contains one or more NULL values, then the result of the + ** expression is also NULL. + */ + assert( destIfFalse!=destIfNull || rRhsHasNull==0 ); + if( rRhsHasNull==0 ){ + /* This branch runs if it is known at compile time that the RHS + ** cannot contain NULL values. This happens as the result + ** of a "NOT NULL" constraint in the database schema. + ** + ** Also run this branch if NULL is equivalent to FALSE + ** for this particular IN operator. + */ + sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1); + VdbeCoverage(v); + }else{ + /* In this branch, the RHS of the IN might contain a NULL and + ** the presence of a NULL on the RHS makes a difference in the + ** outcome. + */ + int j1; + + /* First check to see if the LHS is contained in the RHS. If so, + ** then the answer is TRUE the presence of NULLs in the RHS does + ** not matter. If the LHS is not contained in the RHS, then the + ** answer is NULL if the RHS contains NULLs and the answer is + ** FALSE if the RHS is NULL-free. + */ + j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_IsNull, rRhsHasNull, destIfNull); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); + sqlite3VdbeJumpHere(v, j1); + } } } - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + sqlite3ReleaseTempReg(pParse, r1); + sqlite3ExprCachePop(pParse); + VdbeComment((v, "end IN expr")); } +#endif /* SQLITE_OMIT_SUBQUERY */ /* -** Read data from a blob handle. +** Duplicate an 8-byte value */ -SQLITE_API int sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){ - return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreeData); +static char *dup8bytes(Vdbe *v, const char *in){ + char *out = sqlite3DbMallocRaw(sqlite3VdbeDb(v), 8); + if( out ){ + memcpy(out, in, 8); + } + return out; } +#ifndef SQLITE_OMIT_FLOATING_POINT /* -** Write data to a blob handle. +** Generate an instruction that will put the floating point +** value described by z[0..n-1] into register iMem. +** +** The z[] string will probably not be zero-terminated. But the +** z[n] character is guaranteed to be something that does not look +** like the continuation of the number. */ -SQLITE_API int sqlite3_blob_write(sqlite3_blob *pBlob, const void *z, int n, int iOffset){ - return blobReadWrite(pBlob, (void *)z, n, iOffset, sqlite3BtreePutData); +static void codeReal(Vdbe *v, const char *z, int negateFlag, int iMem){ + if( ALWAYS(z!=0) ){ + double value; + char *zV; + sqlite3AtoF(z, &value, sqlite3Strlen30(z), SQLITE_UTF8); + assert( !sqlite3IsNaN(value) ); /* The new AtoF never returns NaN */ + if( negateFlag ) value = -value; + zV = dup8bytes(v, (char*)&value); + sqlite3VdbeAddOp4(v, OP_Real, 0, iMem, 0, zV, P4_REAL); + } } +#endif + /* -** Query a blob handle for the size of the data. +** Generate an instruction that will put the integer describe by +** text z[0..n-1] into register iMem. ** -** The Incrblob.nByte field is fixed for the lifetime of the Incrblob -** so no mutex is required for access. +** Expr.u.zToken is always UTF8 and zero-terminated. */ -SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *pBlob){ - Incrblob *p = (Incrblob *)pBlob; - return (p && p->pStmt) ? p->nByte : 0; +static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){ + Vdbe *v = pParse->pVdbe; + if( pExpr->flags & EP_IntValue ){ + int i = pExpr->u.iValue; + assert( i>=0 ); + if( negFlag ) i = -i; + sqlite3VdbeAddOp2(v, OP_Integer, i, iMem); + }else{ + int c; + i64 value; + const char *z = pExpr->u.zToken; + assert( z!=0 ); + c = sqlite3DecOrHexToI64(z, &value); + if( c==0 || (c==2 && negFlag) ){ + char *zV; + if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } + zV = dup8bytes(v, (char*)&value); + sqlite3VdbeAddOp4(v, OP_Int64, 0, iMem, 0, zV, P4_INT64); + }else{ +#ifdef SQLITE_OMIT_FLOATING_POINT + sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); +#else +#ifndef SQLITE_OMIT_HEX_INTEGER + if( sqlite3_strnicmp(z,"0x",2)==0 ){ + sqlite3ErrorMsg(pParse, "hex literal too big: %s", z); + }else +#endif + { + codeReal(v, z, negFlag, iMem); + } +#endif + } + } } /* -** Move an existing blob handle to point to a different row of the same -** database table. -** -** If an error occurs, or if the specified row does not exist or does not -** contain a blob or text value, then an error code is returned and the -** database handle error code and message set. If this happens, then all -** subsequent calls to sqlite3_blob_xxx() functions (except blob_close()) -** immediately return SQLITE_ABORT. +** Clear a cache entry. */ -SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *pBlob, sqlite3_int64 iRow){ - int rc; - Incrblob *p = (Incrblob *)pBlob; - sqlite3 *db; - - if( p==0 ) return SQLITE_MISUSE_BKPT; - db = p->db; - sqlite3_mutex_enter(db->mutex); - - if( p->pStmt==0 ){ - /* If there is no statement handle, then the blob-handle has - ** already been invalidated. Return SQLITE_ABORT in this case. - */ - rc = SQLITE_ABORT; - }else{ - char *zErr; - rc = blobSeekToRow(p, iRow, &zErr); - if( rc!=SQLITE_OK ){ - sqlite3Error(db, rc, (zErr ? "%s" : 0), zErr); - sqlite3DbFree(db, zErr); +static void cacheEntryClear(Parse *pParse, struct yColCache *p){ + if( p->tempReg ){ + if( pParse->nTempRegaTempReg) ){ + pParse->aTempReg[pParse->nTempReg++] = p->iReg; } - assert( rc!=SQLITE_SCHEMA ); + p->tempReg = 0; } - - rc = sqlite3ApiExit(db, rc); - assert( rc==SQLITE_OK || p->pStmt==0 ); - sqlite3_mutex_leave(db->mutex); - return rc; } -#endif /* #ifndef SQLITE_OMIT_INCRBLOB */ -/************** End of vdbeblob.c ********************************************/ -/************** Begin file journal.c *****************************************/ /* -** 2007 August 22 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file implements a special kind of sqlite3_file object used -** by SQLite to create journal files if the atomic-write optimization -** is enabled. -** -** The distinctive characteristic of this sqlite3_file is that the -** actual on disk file is created lazily. When the file is created, -** the caller specifies a buffer size for an in-memory buffer to -** be used to service read() and write() requests. The actual file -** on disk is not created or populated until either: -** -** 1) The in-memory representation grows too large for the allocated -** buffer, or -** 2) The sqlite3JournalCreate() function is called. +** Record in the column cache that a particular column from a +** particular table is stored in a particular register. */ -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse *pParse, int iTab, int iCol, int iReg){ + int i; + int minLru; + int idxLru; + struct yColCache *p; + assert( iReg>0 ); /* Register numbers are always positive */ + assert( iCol>=-1 && iCol<32768 ); /* Finite column numbers */ -/* -** A JournalFile object is a subclass of sqlite3_file used by -** as an open file handle for journal files. -*/ -struct JournalFile { - sqlite3_io_methods *pMethod; /* I/O methods on journal files */ - int nBuf; /* Size of zBuf[] in bytes */ - char *zBuf; /* Space to buffer journal writes */ - int iSize; /* Amount of zBuf[] currently used */ - int flags; /* xOpen flags */ - sqlite3_vfs *pVfs; /* The "real" underlying VFS */ - sqlite3_file *pReal; /* The "real" underlying file descriptor */ - const char *zJournal; /* Name of the journal file */ -}; -typedef struct JournalFile JournalFile; + /* The SQLITE_ColumnCache flag disables the column cache. This is used + ** for testing only - to verify that SQLite always gets the same answer + ** with and without the column cache. + */ + if( OptimizationDisabled(pParse->db, SQLITE_ColumnCache) ) return; -/* -** If it does not already exists, create and populate the on-disk file -** for JournalFile p. -*/ -static int createFile(JournalFile *p){ - int rc = SQLITE_OK; - if( !p->pReal ){ - sqlite3_file *pReal = (sqlite3_file *)&p[1]; - rc = sqlite3OsOpen(p->pVfs, p->zJournal, pReal, p->flags, 0); - if( rc==SQLITE_OK ){ - p->pReal = pReal; - if( p->iSize>0 ){ - assert(p->iSize<=p->nBuf); - rc = sqlite3OsWrite(p->pReal, p->zBuf, p->iSize, 0); - } + /* First replace any existing entry. + ** + ** Actually, the way the column cache is currently used, we are guaranteed + ** that the object will never already be in cache. Verify this guarantee. + */ +#ifndef NDEBUG + for(i=0, p=pParse->aColCache; iiReg==0 || p->iTable!=iTab || p->iColumn!=iCol ); + } +#endif + + /* Find an empty slot and replace it */ + for(i=0, p=pParse->aColCache; iiReg==0 ){ + p->iLevel = pParse->iCacheLevel; + p->iTable = iTab; + p->iColumn = iCol; + p->iReg = iReg; + p->tempReg = 0; + p->lru = pParse->iCacheCnt++; + return; } } - return rc; + + /* Replace the last recently used */ + minLru = 0x7fffffff; + idxLru = -1; + for(i=0, p=pParse->aColCache; ilrulru; + } + } + if( ALWAYS(idxLru>=0) ){ + p = &pParse->aColCache[idxLru]; + p->iLevel = pParse->iCacheLevel; + p->iTable = iTab; + p->iColumn = iCol; + p->iReg = iReg; + p->tempReg = 0; + p->lru = pParse->iCacheCnt++; + return; + } } /* -** Close the file. +** Indicate that registers between iReg..iReg+nReg-1 are being overwritten. +** Purge the range of registers from the column cache. */ -static int jrnlClose(sqlite3_file *pJfd){ - JournalFile *p = (JournalFile *)pJfd; - if( p->pReal ){ - sqlite3OsClose(p->pReal); +SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse *pParse, int iReg, int nReg){ + int i; + int iLast = iReg + nReg - 1; + struct yColCache *p; + for(i=0, p=pParse->aColCache; iiReg; + if( r>=iReg && r<=iLast ){ + cacheEntryClear(pParse, p); + p->iReg = 0; + } } - sqlite3_free(p->zBuf); - return SQLITE_OK; } /* -** Read data from the file. +** Remember the current column cache context. Any new entries added +** added to the column cache after this call are removed when the +** corresponding pop occurs. */ -static int jrnlRead( - sqlite3_file *pJfd, /* The journal file from which to read */ - void *zBuf, /* Put the results here */ - int iAmt, /* Number of bytes to read */ - sqlite_int64 iOfst /* Begin reading at this offset */ -){ - int rc = SQLITE_OK; - JournalFile *p = (JournalFile *)pJfd; - if( p->pReal ){ - rc = sqlite3OsRead(p->pReal, zBuf, iAmt, iOfst); - }else if( (iAmt+iOfst)>p->iSize ){ - rc = SQLITE_IOERR_SHORT_READ; - }else{ - memcpy(zBuf, &p->zBuf[iOfst], iAmt); +SQLITE_PRIVATE void sqlite3ExprCachePush(Parse *pParse){ + pParse->iCacheLevel++; +#ifdef SQLITE_DEBUG + if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ + printf("PUSH to %d\n", pParse->iCacheLevel); } - return rc; +#endif } /* -** Write data to the file. +** Remove from the column cache any entries that were added since the +** the previous sqlite3ExprCachePush operation. In other words, restore +** the cache to the state it was in prior the most recent Push. */ -static int jrnlWrite( - sqlite3_file *pJfd, /* The journal file into which to write */ - const void *zBuf, /* Take data to be written from here */ - int iAmt, /* Number of bytes to write */ - sqlite_int64 iOfst /* Begin writing at this offset into the file */ -){ - int rc = SQLITE_OK; - JournalFile *p = (JournalFile *)pJfd; - if( !p->pReal && (iOfst+iAmt)>p->nBuf ){ - rc = createFile(p); +SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){ + int i; + struct yColCache *p; + assert( pParse->iCacheLevel>=1 ); + pParse->iCacheLevel--; +#ifdef SQLITE_DEBUG + if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ + printf("POP to %d\n", pParse->iCacheLevel); } - if( rc==SQLITE_OK ){ - if( p->pReal ){ - rc = sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst); - }else{ - memcpy(&p->zBuf[iOfst], zBuf, iAmt); - if( p->iSize<(iOfst+iAmt) ){ - p->iSize = (iOfst+iAmt); - } +#endif + for(i=0, p=pParse->aColCache; iiReg && p->iLevel>pParse->iCacheLevel ){ + cacheEntryClear(pParse, p); + p->iReg = 0; } } - return rc; } /* -** Truncate the file. +** When a cached column is reused, make sure that its register is +** no longer available as a temp register. ticket #3879: that same +** register might be in the cache in multiple places, so be sure to +** get them all. */ -static int jrnlTruncate(sqlite3_file *pJfd, sqlite_int64 size){ - int rc = SQLITE_OK; - JournalFile *p = (JournalFile *)pJfd; - if( p->pReal ){ - rc = sqlite3OsTruncate(p->pReal, size); - }else if( sizeiSize ){ - p->iSize = size; +static void sqlite3ExprCachePinRegister(Parse *pParse, int iReg){ + int i; + struct yColCache *p; + for(i=0, p=pParse->aColCache; iiReg==iReg ){ + p->tempReg = 0; + } } - return rc; } /* -** Sync the file. +** Generate code to extract the value of the iCol-th column of a table. */ -static int jrnlSync(sqlite3_file *pJfd, int flags){ - int rc; - JournalFile *p = (JournalFile *)pJfd; - if( p->pReal ){ - rc = sqlite3OsSync(p->pReal, flags); +SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable( + Vdbe *v, /* The VDBE under construction */ + Table *pTab, /* The table containing the value */ + int iTabCur, /* The table cursor. Or the PK cursor for WITHOUT ROWID */ + int iCol, /* Index of the column to extract */ + int regOut /* Extract the value into this register */ +){ + if( iCol<0 || iCol==pTab->iPKey ){ + sqlite3VdbeAddOp2(v, OP_Rowid, iTabCur, regOut); }else{ - rc = SQLITE_OK; + int op = IsVirtual(pTab) ? OP_VColumn : OP_Column; + int x = iCol; + if( !HasRowid(pTab) ){ + x = sqlite3ColumnOfIndex(sqlite3PrimaryKeyIndex(pTab), iCol); + } + sqlite3VdbeAddOp3(v, op, iTabCur, x, regOut); + } + if( iCol>=0 ){ + sqlite3ColumnDefault(v, pTab, iCol, regOut); } - return rc; } /* -** Query the size of the file in bytes. +** Generate code that will extract the iColumn-th column from +** table pTab and store the column value in a register. An effort +** is made to store the column value in register iReg, but this is +** not guaranteed. The location of the column value is returned. +** +** There must be an open cursor to pTab in iTable when this routine +** is called. If iColumn<0 then code is generated that extracts the rowid. */ -static int jrnlFileSize(sqlite3_file *pJfd, sqlite_int64 *pSize){ - int rc = SQLITE_OK; - JournalFile *p = (JournalFile *)pJfd; - if( p->pReal ){ - rc = sqlite3OsFileSize(p->pReal, pSize); - }else{ - *pSize = (sqlite_int64) p->iSize; +SQLITE_PRIVATE int sqlite3ExprCodeGetColumn( + Parse *pParse, /* Parsing and code generating context */ + Table *pTab, /* Description of the table we are reading from */ + int iColumn, /* Index of the table column */ + int iTable, /* The cursor pointing to the table */ + int iReg, /* Store results here */ + u8 p5 /* P5 value for OP_Column */ +){ + Vdbe *v = pParse->pVdbe; + int i; + struct yColCache *p; + + for(i=0, p=pParse->aColCache; iiReg>0 && p->iTable==iTable && p->iColumn==iColumn ){ + p->lru = pParse->iCacheCnt++; + sqlite3ExprCachePinRegister(pParse, p->iReg); + return p->iReg; + } + } + assert( v!=0 ); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iTable, iColumn, iReg); + if( p5 ){ + sqlite3VdbeChangeP5(v, p5); + }else{ + sqlite3ExprCacheStore(pParse, iTable, iColumn, iReg); } - return rc; + return iReg; } /* -** Table of methods for JournalFile sqlite3_file object. +** Clear all column cache entries. */ -static struct sqlite3_io_methods JournalFileMethods = { - 1, /* iVersion */ - jrnlClose, /* xClose */ - jrnlRead, /* xRead */ - jrnlWrite, /* xWrite */ - jrnlTruncate, /* xTruncate */ - jrnlSync, /* xSync */ - jrnlFileSize, /* xFileSize */ - 0, /* xLock */ - 0, /* xUnlock */ - 0, /* xCheckReservedLock */ - 0, /* xFileControl */ - 0, /* xSectorSize */ - 0, /* xDeviceCharacteristics */ - 0, /* xShmMap */ - 0, /* xShmLock */ - 0, /* xShmBarrier */ - 0 /* xShmUnmap */ -}; +SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){ + int i; + struct yColCache *p; -/* -** Open a journal file. -*/ -SQLITE_PRIVATE int sqlite3JournalOpen( - sqlite3_vfs *pVfs, /* The VFS to use for actual file I/O */ - const char *zName, /* Name of the journal file */ - sqlite3_file *pJfd, /* Preallocated, blank file handle */ - int flags, /* Opening flags */ - int nBuf /* Bytes buffered before opening the file */ -){ - JournalFile *p = (JournalFile *)pJfd; - memset(p, 0, sqlite3JournalSize(pVfs)); - if( nBuf>0 ){ - p->zBuf = sqlite3MallocZero(nBuf); - if( !p->zBuf ){ - return SQLITE_NOMEM; +#if SQLITE_DEBUG + if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ + printf("CLEAR\n"); + } +#endif + for(i=0, p=pParse->aColCache; iiReg ){ + cacheEntryClear(pParse, p); + p->iReg = 0; } - }else{ - return sqlite3OsOpen(pVfs, zName, pJfd, flags, 0); } - p->pMethod = &JournalFileMethods; - p->nBuf = nBuf; - p->flags = flags; - p->zJournal = zName; - p->pVfs = pVfs; - return SQLITE_OK; } /* -** If the argument p points to a JournalFile structure, and the underlying -** file has not yet been created, create it now. +** Record the fact that an affinity change has occurred on iCount +** registers starting with iStart. +*/ +SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse *pParse, int iStart, int iCount){ + sqlite3ExprCacheRemove(pParse, iStart, iCount); +} + +/* +** Generate code to move content from registers iFrom...iFrom+nReg-1 +** over to iTo..iTo+nReg-1. Keep the column cache up-to-date. */ -SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){ - if( p->pMethods!=&JournalFileMethods ){ - return SQLITE_OK; - } - return createFile((JournalFile *)p); +SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse *pParse, int iFrom, int iTo, int nReg){ + assert( iFrom>=iTo+nReg || iFrom+nReg<=iTo ); + sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg); + sqlite3ExprCacheRemove(pParse, iFrom, nReg); } -/* -** Return the number of bytes required to store a JournalFile that uses vfs -** pVfs to create the underlying on-disk files. +#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) +/* +** Return true if any register in the range iFrom..iTo (inclusive) +** is used as part of the column cache. +** +** This routine is used within assert() and testcase() macros only +** and does not appear in a normal build. */ -SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){ - return (pVfs->szOsFile+sizeof(JournalFile)); +static int usedAsColumnCache(Parse *pParse, int iFrom, int iTo){ + int i; + struct yColCache *p; + for(i=0, p=pParse->aColCache; iiReg; + if( r>=iFrom && r<=iTo ) return 1; /*NO_TEST*/ + } + return 0; } -#endif +#endif /* SQLITE_DEBUG || SQLITE_COVERAGE_TEST */ -/************** End of journal.c *********************************************/ -/************** Begin file memjournal.c **************************************/ /* -** 2008 October 7 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file contains code use to implement an in-memory rollback journal. -** The in-memory rollback journal is used to journal transactions for -** ":memory:" databases and when the journal_mode=MEMORY pragma is used. +** Convert an expression node to a TK_REGISTER */ +static void exprToRegister(Expr *p, int iReg){ + p->op2 = p->op; + p->op = TK_REGISTER; + p->iTable = iReg; + ExprClearProperty(p, EP_Skip); +} -/* Forward references to internal structures */ -typedef struct MemJournal MemJournal; -typedef struct FilePoint FilePoint; -typedef struct FileChunk FileChunk; - -/* Space to hold the rollback journal is allocated in increments of -** this many bytes. +/* +** Generate code into the current Vdbe to evaluate the given +** expression. Attempt to store the results in register "target". +** Return the register where results are stored. ** -** The size chosen is a little less than a power of two. That way, -** the FileChunk object will have a size that almost exactly fills -** a power-of-two allocation. This mimimizes wasted space in power-of-two -** memory allocators. +** With this routine, there is no guarantee that results will +** be stored in target. The result might be stored in some other +** register if it is convenient to do so. The calling function +** must check the return code and move the results to the desired +** register. */ -#define JOURNAL_CHUNKSIZE ((int)(1024-sizeof(FileChunk*))) +SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target){ + Vdbe *v = pParse->pVdbe; /* The VM under construction */ + int op; /* The opcode being coded */ + int inReg = target; /* Results stored in register inReg */ + int regFree1 = 0; /* If non-zero free this temporary register */ + int regFree2 = 0; /* If non-zero free this temporary register */ + int r1, r2, r3, r4; /* Various register numbers */ + sqlite3 *db = pParse->db; /* The database connection */ + Expr tempX; /* Temporary expression node */ -/* Macro to find the minimum of two numeric values. -*/ -#ifndef MIN -# define MIN(x,y) ((x)<(y)?(x):(y)) + assert( target>0 && target<=pParse->nMem ); + if( v==0 ){ + assert( pParse->db->mallocFailed ); + return 0; + } + + if( pExpr==0 ){ + op = TK_NULL; + }else{ + op = pExpr->op; + } + switch( op ){ + case TK_AGG_COLUMN: { + AggInfo *pAggInfo = pExpr->pAggInfo; + struct AggInfo_col *pCol = &pAggInfo->aCol[pExpr->iAgg]; + if( !pAggInfo->directMode ){ + assert( pCol->iMem>0 ); + inReg = pCol->iMem; + break; + }else if( pAggInfo->useSortingIdx ){ + sqlite3VdbeAddOp3(v, OP_Column, pAggInfo->sortingIdxPTab, + pCol->iSorterColumn, target); + break; + } + /* Otherwise, fall thru into the TK_COLUMN case */ + } + case TK_COLUMN: { + int iTab = pExpr->iTable; + if( iTab<0 ){ + if( pParse->ckBase>0 ){ + /* Generating CHECK constraints or inserting into partial index */ + inReg = pExpr->iColumn + pParse->ckBase; + break; + }else{ + /* Deleting from a partial index */ + iTab = pParse->iPartIdxTab; + } + } + inReg = sqlite3ExprCodeGetColumn(pParse, pExpr->pTab, + pExpr->iColumn, iTab, target, + pExpr->op2); + break; + } + case TK_INTEGER: { + codeInteger(pParse, pExpr, 0, target); + break; + } +#ifndef SQLITE_OMIT_FLOATING_POINT + case TK_FLOAT: { + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + codeReal(v, pExpr->u.zToken, 0, target); + break; + } +#endif + case TK_STRING: { + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + sqlite3VdbeAddOp4(v, OP_String8, 0, target, 0, pExpr->u.zToken, 0); + break; + } + case TK_NULL: { + sqlite3VdbeAddOp2(v, OP_Null, 0, target); + break; + } +#ifndef SQLITE_OMIT_BLOB_LITERAL + case TK_BLOB: { + int n; + const char *z; + char *zBlob; + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + assert( pExpr->u.zToken[0]=='x' || pExpr->u.zToken[0]=='X' ); + assert( pExpr->u.zToken[1]=='\'' ); + z = &pExpr->u.zToken[2]; + n = sqlite3Strlen30(z) - 1; + assert( z[n]=='\'' ); + zBlob = sqlite3HexToBlob(sqlite3VdbeDb(v), z, n); + sqlite3VdbeAddOp4(v, OP_Blob, n/2, target, 0, zBlob, P4_DYNAMIC); + break; + } +#endif + case TK_VARIABLE: { + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + assert( pExpr->u.zToken!=0 ); + assert( pExpr->u.zToken[0]!=0 ); + sqlite3VdbeAddOp2(v, OP_Variable, pExpr->iColumn, target); + if( pExpr->u.zToken[1]!=0 ){ + assert( pExpr->u.zToken[0]=='?' + || strcmp(pExpr->u.zToken, pParse->azVar[pExpr->iColumn-1])==0 ); + sqlite3VdbeChangeP4(v, -1, pParse->azVar[pExpr->iColumn-1], P4_STATIC); + } + break; + } + case TK_REGISTER: { + inReg = pExpr->iTable; + break; + } + case TK_AS: { + inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + break; + } +#ifndef SQLITE_OMIT_CAST + case TK_CAST: { + /* Expressions of the form: CAST(pLeft AS token) */ + inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + if( inReg!=target ){ + sqlite3VdbeAddOp2(v, OP_SCopy, inReg, target); + inReg = target; + } + sqlite3VdbeAddOp2(v, OP_Cast, target, + sqlite3AffinityType(pExpr->u.zToken, 0)); + testcase( usedAsColumnCache(pParse, inReg, inReg) ); + sqlite3ExprCacheAffinityChange(pParse, inReg, 1); + break; + } +#endif /* SQLITE_OMIT_CAST */ + case TK_LT: + case TK_LE: + case TK_GT: + case TK_GE: + case TK_NE: + case TK_EQ: { + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, inReg, SQLITE_STOREP2); + assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt); + assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le); + assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt); + assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge); + assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq); + assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_IS: + case TK_ISNOT: { + testcase( op==TK_IS ); + testcase( op==TK_ISNOT ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + op = (op==TK_IS) ? TK_EQ : TK_NE; + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, inReg, SQLITE_STOREP2 | SQLITE_NULLEQ); + VdbeCoverageIf(v, op==TK_EQ); + VdbeCoverageIf(v, op==TK_NE); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_AND: + case TK_OR: + case TK_PLUS: + case TK_STAR: + case TK_MINUS: + case TK_REM: + case TK_BITAND: + case TK_BITOR: + case TK_SLASH: + case TK_LSHIFT: + case TK_RSHIFT: + case TK_CONCAT: { + assert( TK_AND==OP_And ); testcase( op==TK_AND ); + assert( TK_OR==OP_Or ); testcase( op==TK_OR ); + assert( TK_PLUS==OP_Add ); testcase( op==TK_PLUS ); + assert( TK_MINUS==OP_Subtract ); testcase( op==TK_MINUS ); + assert( TK_REM==OP_Remainder ); testcase( op==TK_REM ); + assert( TK_BITAND==OP_BitAnd ); testcase( op==TK_BITAND ); + assert( TK_BITOR==OP_BitOr ); testcase( op==TK_BITOR ); + assert( TK_SLASH==OP_Divide ); testcase( op==TK_SLASH ); + assert( TK_LSHIFT==OP_ShiftLeft ); testcase( op==TK_LSHIFT ); + assert( TK_RSHIFT==OP_ShiftRight ); testcase( op==TK_RSHIFT ); + assert( TK_CONCAT==OP_Concat ); testcase( op==TK_CONCAT ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + sqlite3VdbeAddOp3(v, op, r2, r1, target); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_UMINUS: { + Expr *pLeft = pExpr->pLeft; + assert( pLeft ); + if( pLeft->op==TK_INTEGER ){ + codeInteger(pParse, pLeft, 1, target); +#ifndef SQLITE_OMIT_FLOATING_POINT + }else if( pLeft->op==TK_FLOAT ){ + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + codeReal(v, pLeft->u.zToken, 1, target); #endif + }else{ + tempX.op = TK_INTEGER; + tempX.flags = EP_IntValue|EP_TokenOnly; + tempX.u.iValue = 0; + r1 = sqlite3ExprCodeTemp(pParse, &tempX, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free2); + sqlite3VdbeAddOp3(v, OP_Subtract, r2, r1, target); + testcase( regFree2==0 ); + } + inReg = target; + break; + } + case TK_BITNOT: + case TK_NOT: { + assert( TK_BITNOT==OP_BitNot ); testcase( op==TK_BITNOT ); + assert( TK_NOT==OP_Not ); testcase( op==TK_NOT ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + testcase( regFree1==0 ); + inReg = target; + sqlite3VdbeAddOp2(v, op, r1, inReg); + break; + } + case TK_ISNULL: + case TK_NOTNULL: { + int addr; + assert( TK_ISNULL==OP_IsNull ); testcase( op==TK_ISNULL ); + assert( TK_NOTNULL==OP_NotNull ); testcase( op==TK_NOTNULL ); + sqlite3VdbeAddOp2(v, OP_Integer, 1, target); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + testcase( regFree1==0 ); + addr = sqlite3VdbeAddOp1(v, op, r1); + VdbeCoverageIf(v, op==TK_ISNULL); + VdbeCoverageIf(v, op==TK_NOTNULL); + sqlite3VdbeAddOp2(v, OP_Integer, 0, target); + sqlite3VdbeJumpHere(v, addr); + break; + } + case TK_AGG_FUNCTION: { + AggInfo *pInfo = pExpr->pAggInfo; + if( pInfo==0 ){ + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + sqlite3ErrorMsg(pParse, "misuse of aggregate: %s()", pExpr->u.zToken); + }else{ + inReg = pInfo->aFunc[pExpr->iAgg].iMem; + } + break; + } + case TK_FUNCTION: { + ExprList *pFarg; /* List of function arguments */ + int nFarg; /* Number of function arguments */ + FuncDef *pDef; /* The function definition object */ + int nId; /* Length of the function name in bytes */ + const char *zId; /* The function name */ + u32 constMask = 0; /* Mask of function arguments that are constant */ + int i; /* Loop counter */ + u8 enc = ENC(db); /* The text encoding used by this database */ + CollSeq *pColl = 0; /* A collating sequence */ -/* -** The rollback journal is composed of a linked list of these structures. -*/ -struct FileChunk { - FileChunk *pNext; /* Next chunk in the journal */ - u8 zChunk[JOURNAL_CHUNKSIZE]; /* Content of this chunk */ -}; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + if( ExprHasProperty(pExpr, EP_TokenOnly) ){ + pFarg = 0; + }else{ + pFarg = pExpr->x.pList; + } + nFarg = pFarg ? pFarg->nExpr : 0; + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + zId = pExpr->u.zToken; + nId = sqlite3Strlen30(zId); + pDef = sqlite3FindFunction(db, zId, nId, nFarg, enc, 0); + if( pDef==0 || pDef->xFunc==0 ){ + sqlite3ErrorMsg(pParse, "unknown function: %.*s()", nId, zId); + break; + } -/* -** An instance of this object serves as a cursor into the rollback journal. -** The cursor can be either for reading or writing. -*/ -struct FilePoint { - sqlite3_int64 iOffset; /* Offset from the beginning of the file */ - FileChunk *pChunk; /* Specific chunk into which cursor points */ -}; + /* Attempt a direct implementation of the built-in COALESCE() and + ** IFNULL() functions. This avoids unnecessary evaluation of + ** arguments past the first non-NULL argument. + */ + if( pDef->funcFlags & SQLITE_FUNC_COALESCE ){ + int endCoalesce = sqlite3VdbeMakeLabel(v); + assert( nFarg>=2 ); + sqlite3ExprCode(pParse, pFarg->a[0].pExpr, target); + for(i=1; ia[i].pExpr, target); + sqlite3ExprCachePop(pParse); + } + sqlite3VdbeResolveLabel(v, endCoalesce); + break; + } -/* -** This subclass is a subclass of sqlite3_file. Each open memory-journal -** is an instance of this class. -*/ -struct MemJournal { - sqlite3_io_methods *pMethod; /* Parent class. MUST BE FIRST */ - FileChunk *pFirst; /* Head of in-memory chunk-list */ - FilePoint endpoint; /* Pointer to the end of the file */ - FilePoint readpoint; /* Pointer to the end of the last xRead() */ -}; + /* The UNLIKELY() function is a no-op. The result is the value + ** of the first argument. + */ + if( pDef->funcFlags & SQLITE_FUNC_UNLIKELY ){ + assert( nFarg>=1 ); + sqlite3ExprCode(pParse, pFarg->a[0].pExpr, target); + break; + } -/* -** Read data from the in-memory journal file. This is the implementation -** of the sqlite3_vfs.xRead method. -*/ -static int memjrnlRead( - sqlite3_file *pJfd, /* The journal file from which to read */ - void *zBuf, /* Put the results here */ - int iAmt, /* Number of bytes to read */ - sqlite_int64 iOfst /* Begin reading at this offset */ -){ - MemJournal *p = (MemJournal *)pJfd; - u8 *zOut = zBuf; - int nRead = iAmt; - int iChunkOffset; - FileChunk *pChunk; + for(i=0; ia[i].pExpr) ){ + testcase( i==31 ); + constMask |= MASKBIT32(i); + } + if( (pDef->funcFlags & SQLITE_FUNC_NEEDCOLL)!=0 && !pColl ){ + pColl = sqlite3ExprCollSeq(pParse, pFarg->a[i].pExpr); + } + } + if( pFarg ){ + if( constMask ){ + r1 = pParse->nMem+1; + pParse->nMem += nFarg; + }else{ + r1 = sqlite3GetTempRange(pParse, nFarg); + } - /* SQLite never tries to read past the end of a rollback journal file */ - assert( iOfst+iAmt<=p->endpoint.iOffset ); + /* For length() and typeof() functions with a column argument, + ** set the P5 parameter to the OP_Column opcode to OPFLAG_LENGTHARG + ** or OPFLAG_TYPEOFARG respectively, to avoid unnecessary data + ** loading. + */ + if( (pDef->funcFlags & (SQLITE_FUNC_LENGTH|SQLITE_FUNC_TYPEOF))!=0 ){ + u8 exprOp; + assert( nFarg==1 ); + assert( pFarg->a[0].pExpr!=0 ); + exprOp = pFarg->a[0].pExpr->op; + if( exprOp==TK_COLUMN || exprOp==TK_AGG_COLUMN ){ + assert( SQLITE_FUNC_LENGTH==OPFLAG_LENGTHARG ); + assert( SQLITE_FUNC_TYPEOF==OPFLAG_TYPEOFARG ); + testcase( pDef->funcFlags & OPFLAG_LENGTHARG ); + pFarg->a[0].pExpr->op2 = + pDef->funcFlags & (OPFLAG_LENGTHARG|OPFLAG_TYPEOFARG); + } + } - if( p->readpoint.iOffset!=iOfst || iOfst==0 ){ - sqlite3_int64 iOff = 0; - for(pChunk=p->pFirst; - ALWAYS(pChunk) && (iOff+JOURNAL_CHUNKSIZE)<=iOfst; - pChunk=pChunk->pNext - ){ - iOff += JOURNAL_CHUNKSIZE; + sqlite3ExprCachePush(pParse); /* Ticket 2ea2425d34be */ + sqlite3ExprCodeExprList(pParse, pFarg, r1, + SQLITE_ECEL_DUP|SQLITE_ECEL_FACTOR); + sqlite3ExprCachePop(pParse); /* Ticket 2ea2425d34be */ + }else{ + r1 = 0; + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + /* Possibly overload the function if the first argument is + ** a virtual table column. + ** + ** For infix functions (LIKE, GLOB, REGEXP, and MATCH) use the + ** second argument, not the first, as the argument to test to + ** see if it is a column in a virtual table. This is done because + ** the left operand of infix functions (the operand we want to + ** control overloading) ends up as the second argument to the + ** function. The expression "A glob B" is equivalent to + ** "glob(B,A). We want to use the A in "A glob B" to test + ** for function overloading. But we use the B term in "glob(B,A)". + */ + if( nFarg>=2 && (pExpr->flags & EP_InfixFunc) ){ + pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[1].pExpr); + }else if( nFarg>0 ){ + pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[0].pExpr); + } +#endif + if( pDef->funcFlags & SQLITE_FUNC_NEEDCOLL ){ + if( !pColl ) pColl = db->pDfltColl; + sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ); + } + sqlite3VdbeAddOp4(v, OP_Function, constMask, r1, target, + (char*)pDef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nFarg); + if( nFarg && constMask==0 ){ + sqlite3ReleaseTempRange(pParse, r1, nFarg); + } + break; } - }else{ - pChunk = p->readpoint.pChunk; - } +#ifndef SQLITE_OMIT_SUBQUERY + case TK_EXISTS: + case TK_SELECT: { + testcase( op==TK_EXISTS ); + testcase( op==TK_SELECT ); + inReg = sqlite3CodeSubselect(pParse, pExpr, 0, 0); + break; + } + case TK_IN: { + int destIfFalse = sqlite3VdbeMakeLabel(v); + int destIfNull = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_Null, 0, target); + sqlite3ExprCodeIN(pParse, pExpr, destIfFalse, destIfNull); + sqlite3VdbeAddOp2(v, OP_Integer, 1, target); + sqlite3VdbeResolveLabel(v, destIfFalse); + sqlite3VdbeAddOp2(v, OP_AddImm, target, 0); + sqlite3VdbeResolveLabel(v, destIfNull); + break; + } +#endif /* SQLITE_OMIT_SUBQUERY */ - iChunkOffset = (int)(iOfst%JOURNAL_CHUNKSIZE); - do { - int iSpace = JOURNAL_CHUNKSIZE - iChunkOffset; - int nCopy = MIN(nRead, (JOURNAL_CHUNKSIZE - iChunkOffset)); - memcpy(zOut, &pChunk->zChunk[iChunkOffset], nCopy); - zOut += nCopy; - nRead -= iSpace; - iChunkOffset = 0; - } while( nRead>=0 && (pChunk=pChunk->pNext)!=0 && nRead>0 ); - p->readpoint.iOffset = iOfst+iAmt; - p->readpoint.pChunk = pChunk; - return SQLITE_OK; -} + /* + ** x BETWEEN y AND z + ** + ** This is equivalent to + ** + ** x>=y AND x<=z + ** + ** X is stored in pExpr->pLeft. + ** Y is stored in pExpr->pList->a[0].pExpr. + ** Z is stored in pExpr->pList->a[1].pExpr. + */ + case TK_BETWEEN: { + Expr *pLeft = pExpr->pLeft; + struct ExprList_item *pLItem = pExpr->x.pList->a; + Expr *pRight = pLItem->pExpr; + + r1 = sqlite3ExprCodeTemp(pParse, pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + r3 = sqlite3GetTempReg(pParse); + r4 = sqlite3GetTempReg(pParse); + codeCompare(pParse, pLeft, pRight, OP_Ge, + r1, r2, r3, SQLITE_STOREP2); VdbeCoverage(v); + pLItem++; + pRight = pLItem->pExpr; + sqlite3ReleaseTempReg(pParse, regFree2); + r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2); + testcase( regFree2==0 ); + codeCompare(pParse, pLeft, pRight, OP_Le, r1, r2, r4, SQLITE_STOREP2); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_And, r3, r4, target); + sqlite3ReleaseTempReg(pParse, r3); + sqlite3ReleaseTempReg(pParse, r4); + break; + } + case TK_COLLATE: + case TK_UPLUS: { + inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + break; + } + + case TK_TRIGGER: { + /* If the opcode is TK_TRIGGER, then the expression is a reference + ** to a column in the new.* or old.* pseudo-tables available to + ** trigger programs. In this case Expr.iTable is set to 1 for the + ** new.* pseudo-table, or 0 for the old.* pseudo-table. Expr.iColumn + ** is set to the column of the pseudo-table to read, or to -1 to + ** read the rowid field. + ** + ** The expression is implemented using an OP_Param opcode. The p1 + ** parameter is set to 0 for an old.rowid reference, or to (i+1) + ** to reference another column of the old.* pseudo-table, where + ** i is the index of the column. For a new.rowid reference, p1 is + ** set to (n+1), where n is the number of columns in each pseudo-table. + ** For a reference to any other column in the new.* pseudo-table, p1 + ** is set to (n+2+i), where n and i are as defined previously. For + ** example, if the table on which triggers are being fired is + ** declared as: + ** + ** CREATE TABLE t1(a, b); + ** + ** Then p1 is interpreted as follows: + ** + ** p1==0 -> old.rowid p1==3 -> new.rowid + ** p1==1 -> old.a p1==4 -> new.a + ** p1==2 -> old.b p1==5 -> new.b + */ + Table *pTab = pExpr->pTab; + int p1 = pExpr->iTable * (pTab->nCol+1) + 1 + pExpr->iColumn; + + assert( pExpr->iTable==0 || pExpr->iTable==1 ); + assert( pExpr->iColumn>=-1 && pExpr->iColumnnCol ); + assert( pTab->iPKey<0 || pExpr->iColumn!=pTab->iPKey ); + assert( p1>=0 && p1<(pTab->nCol*2+2) ); + + sqlite3VdbeAddOp2(v, OP_Param, p1, target); + VdbeComment((v, "%s.%s -> $%d", + (pExpr->iTable ? "new" : "old"), + (pExpr->iColumn<0 ? "rowid" : pExpr->pTab->aCol[pExpr->iColumn].zName), + target + )); -/* -** Write data to the file. -*/ -static int memjrnlWrite( - sqlite3_file *pJfd, /* The journal file into which to write */ - const void *zBuf, /* Take data to be written from here */ - int iAmt, /* Number of bytes to write */ - sqlite_int64 iOfst /* Begin writing at this offset into the file */ -){ - MemJournal *p = (MemJournal *)pJfd; - int nWrite = iAmt; - u8 *zWrite = (u8 *)zBuf; +#ifndef SQLITE_OMIT_FLOATING_POINT + /* If the column has REAL affinity, it may currently be stored as an + ** integer. Use OP_RealAffinity to make sure it is really real. */ + if( pExpr->iColumn>=0 + && pTab->aCol[pExpr->iColumn].affinity==SQLITE_AFF_REAL + ){ + sqlite3VdbeAddOp1(v, OP_RealAffinity, target); + } +#endif + break; + } - /* An in-memory journal file should only ever be appended to. Random - ** access writes are not required by sqlite. - */ - assert( iOfst==p->endpoint.iOffset ); - UNUSED_PARAMETER(iOfst); - while( nWrite>0 ){ - FileChunk *pChunk = p->endpoint.pChunk; - int iChunkOffset = (int)(p->endpoint.iOffset%JOURNAL_CHUNKSIZE); - int iSpace = MIN(nWrite, JOURNAL_CHUNKSIZE - iChunkOffset); + /* + ** Form A: + ** CASE x WHEN e1 THEN r1 WHEN e2 THEN r2 ... WHEN eN THEN rN ELSE y END + ** + ** Form B: + ** CASE WHEN e1 THEN r1 WHEN e2 THEN r2 ... WHEN eN THEN rN ELSE y END + ** + ** Form A is can be transformed into the equivalent form B as follows: + ** CASE WHEN x=e1 THEN r1 WHEN x=e2 THEN r2 ... + ** WHEN x=eN THEN rN ELSE y END + ** + ** X (if it exists) is in pExpr->pLeft. + ** Y is in the last element of pExpr->x.pList if pExpr->x.pList->nExpr is + ** odd. The Y is also optional. If the number of elements in x.pList + ** is even, then Y is omitted and the "otherwise" result is NULL. + ** Ei is in pExpr->pList->a[i*2] and Ri is pExpr->pList->a[i*2+1]. + ** + ** The result of the expression is the Ri for the first matching Ei, + ** or if there is no matching Ei, the ELSE term Y, or if there is + ** no ELSE term, NULL. + */ + default: assert( op==TK_CASE ); { + int endLabel; /* GOTO label for end of CASE stmt */ + int nextCase; /* GOTO label for next WHEN clause */ + int nExpr; /* 2x number of WHEN terms */ + int i; /* Loop counter */ + ExprList *pEList; /* List of WHEN terms */ + struct ExprList_item *aListelem; /* Array of WHEN terms */ + Expr opCompare; /* The X==Ei expression */ + Expr *pX; /* The X expression */ + Expr *pTest = 0; /* X==Ei (form A) or just Ei (form B) */ + VVA_ONLY( int iCacheLevel = pParse->iCacheLevel; ) - if( iChunkOffset==0 ){ - /* New chunk is required to extend the file. */ - FileChunk *pNew = sqlite3_malloc(sizeof(FileChunk)); - if( !pNew ){ - return SQLITE_IOERR_NOMEM; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) && pExpr->x.pList ); + assert(pExpr->x.pList->nExpr > 0); + pEList = pExpr->x.pList; + aListelem = pEList->a; + nExpr = pEList->nExpr; + endLabel = sqlite3VdbeMakeLabel(v); + if( (pX = pExpr->pLeft)!=0 ){ + tempX = *pX; + testcase( pX->op==TK_COLUMN ); + exprToRegister(&tempX, sqlite3ExprCodeTemp(pParse, pX, ®Free1)); + testcase( regFree1==0 ); + opCompare.op = TK_EQ; + opCompare.pLeft = &tempX; + pTest = &opCompare; + /* Ticket b351d95f9cd5ef17e9d9dbae18f5ca8611190001: + ** The value in regFree1 might get SCopy-ed into the file result. + ** So make sure that the regFree1 register is not reused for other + ** purposes and possibly overwritten. */ + regFree1 = 0; } - pNew->pNext = 0; - if( pChunk ){ - assert( p->pFirst ); - pChunk->pNext = pNew; + for(i=0; iop==TK_COLUMN ); + sqlite3ExprIfFalse(pParse, pTest, nextCase, SQLITE_JUMPIFNULL); + testcase( aListelem[i+1].pExpr->op==TK_COLUMN ); + sqlite3ExprCode(pParse, aListelem[i+1].pExpr, target); + sqlite3VdbeAddOp2(v, OP_Goto, 0, endLabel); + sqlite3ExprCachePop(pParse); + sqlite3VdbeResolveLabel(v, nextCase); + } + if( (nExpr&1)!=0 ){ + sqlite3ExprCachePush(pParse); + sqlite3ExprCode(pParse, pEList->a[nExpr-1].pExpr, target); + sqlite3ExprCachePop(pParse); }else{ - assert( !p->pFirst ); - p->pFirst = pNew; + sqlite3VdbeAddOp2(v, OP_Null, 0, target); } - p->endpoint.pChunk = pNew; + assert( db->mallocFailed || pParse->nErr>0 + || pParse->iCacheLevel==iCacheLevel ); + sqlite3VdbeResolveLabel(v, endLabel); + break; } +#ifndef SQLITE_OMIT_TRIGGER + case TK_RAISE: { + assert( pExpr->affinity==OE_Rollback + || pExpr->affinity==OE_Abort + || pExpr->affinity==OE_Fail + || pExpr->affinity==OE_Ignore + ); + if( !pParse->pTriggerTab ){ + sqlite3ErrorMsg(pParse, + "RAISE() may only be used within a trigger-program"); + return 0; + } + if( pExpr->affinity==OE_Abort ){ + sqlite3MayAbort(pParse); + } + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + if( pExpr->affinity==OE_Ignore ){ + sqlite3VdbeAddOp4( + v, OP_Halt, SQLITE_OK, OE_Ignore, 0, pExpr->u.zToken,0); + VdbeCoverage(v); + }else{ + sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_TRIGGER, + pExpr->affinity, pExpr->u.zToken, 0, 0); + } - memcpy(&p->endpoint.pChunk->zChunk[iChunkOffset], zWrite, iSpace); - zWrite += iSpace; - nWrite -= iSpace; - p->endpoint.iOffset += iSpace; + break; + } +#endif } - - return SQLITE_OK; + sqlite3ReleaseTempReg(pParse, regFree1); + sqlite3ReleaseTempReg(pParse, regFree2); + return inReg; } /* -** Truncate the file. +** Factor out the code of the given expression to initialization time. */ -static int memjrnlTruncate(sqlite3_file *pJfd, sqlite_int64 size){ - MemJournal *p = (MemJournal *)pJfd; - FileChunk *pChunk; - assert(size==0); - UNUSED_PARAMETER(size); - pChunk = p->pFirst; - while( pChunk ){ - FileChunk *pTmp = pChunk; - pChunk = pChunk->pNext; - sqlite3_free(pTmp); +SQLITE_PRIVATE void sqlite3ExprCodeAtInit( + Parse *pParse, /* Parsing context */ + Expr *pExpr, /* The expression to code when the VDBE initializes */ + int regDest, /* Store the value in this register */ + u8 reusable /* True if this expression is reusable */ +){ + ExprList *p; + assert( ConstFactorOk(pParse) ); + p = pParse->pConstExpr; + pExpr = sqlite3ExprDup(pParse->db, pExpr, 0); + p = sqlite3ExprListAppend(pParse, p, pExpr); + if( p ){ + struct ExprList_item *pItem = &p->a[p->nExpr-1]; + pItem->u.iConstExprReg = regDest; + pItem->reusable = reusable; } - sqlite3MemJournalOpen(pJfd); - return SQLITE_OK; -} - -/* -** Close the file. -*/ -static int memjrnlClose(sqlite3_file *pJfd){ - memjrnlTruncate(pJfd, 0); - return SQLITE_OK; + pParse->pConstExpr = p; } - /* -** Sync the file. +** Generate code to evaluate an expression and store the results +** into a register. Return the register number where the results +** are stored. ** -** Syncing an in-memory journal is a no-op. And, in fact, this routine -** is never called in a working implementation. This implementation -** exists purely as a contingency, in case some malfunction in some other -** part of SQLite causes Sync to be called by mistake. -*/ -static int memjrnlSync(sqlite3_file *NotUsed, int NotUsed2){ - UNUSED_PARAMETER2(NotUsed, NotUsed2); - return SQLITE_OK; -} - -/* -** Query the size of the file in bytes. +** If the register is a temporary register that can be deallocated, +** then write its number into *pReg. If the result register is not +** a temporary, then set *pReg to zero. +** +** If pExpr is a constant, then this routine might generate this +** code to fill the register in the initialization section of the +** VDBE program, in order to factor it out of the evaluation loop. */ -static int memjrnlFileSize(sqlite3_file *pJfd, sqlite_int64 *pSize){ - MemJournal *p = (MemJournal *)pJfd; - *pSize = (sqlite_int64) p->endpoint.iOffset; - return SQLITE_OK; +SQLITE_PRIVATE int sqlite3ExprCodeTemp(Parse *pParse, Expr *pExpr, int *pReg){ + int r2; + pExpr = sqlite3ExprSkipCollate(pExpr); + if( ConstFactorOk(pParse) + && pExpr->op!=TK_REGISTER + && sqlite3ExprIsConstantNotJoin(pExpr) + ){ + ExprList *p = pParse->pConstExpr; + int i; + *pReg = 0; + if( p ){ + struct ExprList_item *pItem; + for(pItem=p->a, i=p->nExpr; i>0; pItem++, i--){ + if( pItem->reusable && sqlite3ExprCompare(pItem->pExpr,pExpr,-1)==0 ){ + return pItem->u.iConstExprReg; + } + } + } + r2 = ++pParse->nMem; + sqlite3ExprCodeAtInit(pParse, pExpr, r2, 1); + }else{ + int r1 = sqlite3GetTempReg(pParse); + r2 = sqlite3ExprCodeTarget(pParse, pExpr, r1); + if( r2==r1 ){ + *pReg = r1; + }else{ + sqlite3ReleaseTempReg(pParse, r1); + *pReg = 0; + } + } + return r2; } /* -** Table of methods for MemJournal sqlite3_file object. +** Generate code that will evaluate expression pExpr and store the +** results in register target. The results are guaranteed to appear +** in register target. */ -static const struct sqlite3_io_methods MemJournalMethods = { - 1, /* iVersion */ - memjrnlClose, /* xClose */ - memjrnlRead, /* xRead */ - memjrnlWrite, /* xWrite */ - memjrnlTruncate, /* xTruncate */ - memjrnlSync, /* xSync */ - memjrnlFileSize, /* xFileSize */ - 0, /* xLock */ - 0, /* xUnlock */ - 0, /* xCheckReservedLock */ - 0, /* xFileControl */ - 0, /* xSectorSize */ - 0, /* xDeviceCharacteristics */ - 0, /* xShmMap */ - 0, /* xShmLock */ - 0, /* xShmBarrier */ - 0 /* xShmUnlock */ -}; +SQLITE_PRIVATE void sqlite3ExprCode(Parse *pParse, Expr *pExpr, int target){ + int inReg; -/* -** Open a journal file. -*/ -SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *pJfd){ - MemJournal *p = (MemJournal *)pJfd; - assert( EIGHT_BYTE_ALIGNMENT(p) ); - memset(p, 0, sqlite3MemJournalSize()); - p->pMethod = (sqlite3_io_methods*)&MemJournalMethods; + assert( target>0 && target<=pParse->nMem ); + if( pExpr && pExpr->op==TK_REGISTER ){ + sqlite3VdbeAddOp2(pParse->pVdbe, OP_Copy, pExpr->iTable, target); + }else{ + inReg = sqlite3ExprCodeTarget(pParse, pExpr, target); + assert( pParse->pVdbe || pParse->db->mallocFailed ); + if( inReg!=target && pParse->pVdbe ){ + sqlite3VdbeAddOp2(pParse->pVdbe, OP_SCopy, inReg, target); + } + } } /* -** Return true if the file-handle passed as an argument is -** an in-memory journal -*/ -SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *pJfd){ - return pJfd->pMethods==&MemJournalMethods; -} - -/* -** Return the number of bytes required to store a MemJournal file descriptor. +** Generate code that will evaluate expression pExpr and store the +** results in register target. The results are guaranteed to appear +** in register target. If the expression is constant, then this routine +** might choose to code the expression at initialization time. */ -SQLITE_PRIVATE int sqlite3MemJournalSize(void){ - return sizeof(MemJournal); +SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse *pParse, Expr *pExpr, int target){ + if( pParse->okConstFactor && sqlite3ExprIsConstant(pExpr) ){ + sqlite3ExprCodeAtInit(pParse, pExpr, target, 0); + }else{ + sqlite3ExprCode(pParse, pExpr, target); + } } -/************** End of memjournal.c ******************************************/ -/************** Begin file walker.c ******************************************/ /* -** 2008 August 16 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** Generate code that evaluates the given expression and puts the result +** in register target. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Also make a copy of the expression results into another "cache" register +** and modify the expression so that the next time it is evaluated, +** the result is a copy of the cache register. ** -************************************************************************* -** This file contains routines used for walking the parser tree for -** an SQL statement. +** This routine is used for expressions that are used multiple +** times. They are evaluated once and the results of the expression +** are reused. */ +SQLITE_PRIVATE void sqlite3ExprCodeAndCache(Parse *pParse, Expr *pExpr, int target){ + Vdbe *v = pParse->pVdbe; + int iMem; - -/* -** Walk an expression tree. Invoke the callback once for each node -** of the expression, while decending. (In other words, the callback -** is invoked before visiting children.) -** -** The return value from the callback should be one of the WRC_* -** constants to specify how to proceed with the walk. -** -** WRC_Continue Continue descending down the tree. -** -** WRC_Prune Do not descend into child nodes. But allow -** the walk to continue with sibling nodes. -** -** WRC_Abort Do no more callbacks. Unwind the stack and -** return the top-level walk call. -** -** The return value from this routine is WRC_Abort to abandon the tree walk -** and WRC_Continue to continue. -*/ -SQLITE_PRIVATE int sqlite3WalkExpr(Walker *pWalker, Expr *pExpr){ - int rc; - if( pExpr==0 ) return WRC_Continue; - testcase( ExprHasProperty(pExpr, EP_TokenOnly) ); - testcase( ExprHasProperty(pExpr, EP_Reduced) ); - rc = pWalker->xExprCallback(pWalker, pExpr); - if( rc==WRC_Continue - && !ExprHasAnyProperty(pExpr,EP_TokenOnly) ){ - if( sqlite3WalkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, pExpr->pRight) ) return WRC_Abort; - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort; - }else{ - if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort; - } - } - return rc & WRC_Abort; + assert( target>0 ); + assert( pExpr->op!=TK_REGISTER ); + sqlite3ExprCode(pParse, pExpr, target); + iMem = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Copy, target, iMem); + exprToRegister(pExpr, iMem); } +#ifdef SQLITE_DEBUG /* -** Call sqlite3WalkExpr() for every expression in list p or until -** an abort request is seen. +** Generate a human-readable explanation of an expression tree. */ -SQLITE_PRIVATE int sqlite3WalkExprList(Walker *pWalker, ExprList *p){ - int i; - struct ExprList_item *pItem; - if( p ){ - for(i=p->nExpr, pItem=p->a; i>0; i--, pItem++){ - if( sqlite3WalkExpr(pWalker, pItem->pExpr) ) return WRC_Abort; - } +SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){ + const char *zBinOp = 0; /* Binary operator */ + const char *zUniOp = 0; /* Unary operator */ + pView = sqlite3TreeViewPush(pView, moreToFollow); + if( pExpr==0 ){ + sqlite3TreeViewLine(pView, "nil"); + sqlite3TreeViewPop(pView); + return; } - return WRC_Continue; -} - -/* -** Walk all expressions associated with SELECT statement p. Do -** not invoke the SELECT callback on p, but do (of course) invoke -** any expr callbacks and SELECT callbacks that come from subqueries. -** Return WRC_Abort or WRC_Continue. -*/ -SQLITE_PRIVATE int sqlite3WalkSelectExpr(Walker *pWalker, Select *p){ - if( sqlite3WalkExprList(pWalker, p->pEList) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pWhere) ) return WRC_Abort; - if( sqlite3WalkExprList(pWalker, p->pGroupBy) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pHaving) ) return WRC_Abort; - if( sqlite3WalkExprList(pWalker, p->pOrderBy) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pLimit) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pOffset) ) return WRC_Abort; - return WRC_Continue; -} - -/* -** Walk the parse trees associated with all subqueries in the -** FROM clause of SELECT statement p. Do not invoke the select -** callback on p, but do invoke it on each FROM clause subquery -** and on any subqueries further down in the tree. Return -** WRC_Abort or WRC_Continue; -*/ -SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker *pWalker, Select *p){ - SrcList *pSrc; - int i; - struct SrcList_item *pItem; + switch( pExpr->op ){ + case TK_AGG_COLUMN: { + sqlite3TreeViewLine(pView, "AGG{%d:%d}", + pExpr->iTable, pExpr->iColumn); + break; + } + case TK_COLUMN: { + if( pExpr->iTable<0 ){ + /* This only happens when coding check constraints */ + sqlite3TreeViewLine(pView, "COLUMN(%d)", pExpr->iColumn); + }else{ + sqlite3TreeViewLine(pView, "{%d:%d}", + pExpr->iTable, pExpr->iColumn); + } + break; + } + case TK_INTEGER: { + if( pExpr->flags & EP_IntValue ){ + sqlite3TreeViewLine(pView, "%d", pExpr->u.iValue); + }else{ + sqlite3TreeViewLine(pView, "%s", pExpr->u.zToken); + } + break; + } +#ifndef SQLITE_OMIT_FLOATING_POINT + case TK_FLOAT: { + sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); + break; + } +#endif + case TK_STRING: { + sqlite3TreeViewLine(pView,"%Q", pExpr->u.zToken); + break; + } + case TK_NULL: { + sqlite3TreeViewLine(pView,"NULL"); + break; + } +#ifndef SQLITE_OMIT_BLOB_LITERAL + case TK_BLOB: { + sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); + break; + } +#endif + case TK_VARIABLE: { + sqlite3TreeViewLine(pView,"VARIABLE(%s,%d)", + pExpr->u.zToken, pExpr->iColumn); + break; + } + case TK_REGISTER: { + sqlite3TreeViewLine(pView,"REGISTER(%d)", pExpr->iTable); + break; + } + case TK_AS: { + sqlite3TreeViewLine(pView,"AS %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + break; + } + case TK_ID: { + sqlite3TreeViewLine(pView,"ID %Q", pExpr->u.zToken); + break; + } +#ifndef SQLITE_OMIT_CAST + case TK_CAST: { + /* Expressions of the form: CAST(pLeft AS token) */ + sqlite3TreeViewLine(pView,"CAST %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + break; + } +#endif /* SQLITE_OMIT_CAST */ + case TK_LT: zBinOp = "LT"; break; + case TK_LE: zBinOp = "LE"; break; + case TK_GT: zBinOp = "GT"; break; + case TK_GE: zBinOp = "GE"; break; + case TK_NE: zBinOp = "NE"; break; + case TK_EQ: zBinOp = "EQ"; break; + case TK_IS: zBinOp = "IS"; break; + case TK_ISNOT: zBinOp = "ISNOT"; break; + case TK_AND: zBinOp = "AND"; break; + case TK_OR: zBinOp = "OR"; break; + case TK_PLUS: zBinOp = "ADD"; break; + case TK_STAR: zBinOp = "MUL"; break; + case TK_MINUS: zBinOp = "SUB"; break; + case TK_REM: zBinOp = "REM"; break; + case TK_BITAND: zBinOp = "BITAND"; break; + case TK_BITOR: zBinOp = "BITOR"; break; + case TK_SLASH: zBinOp = "DIV"; break; + case TK_LSHIFT: zBinOp = "LSHIFT"; break; + case TK_RSHIFT: zBinOp = "RSHIFT"; break; + case TK_CONCAT: zBinOp = "CONCAT"; break; + case TK_DOT: zBinOp = "DOT"; break; + + case TK_UMINUS: zUniOp = "UMINUS"; break; + case TK_UPLUS: zUniOp = "UPLUS"; break; + case TK_BITNOT: zUniOp = "BITNOT"; break; + case TK_NOT: zUniOp = "NOT"; break; + case TK_ISNULL: zUniOp = "ISNULL"; break; + case TK_NOTNULL: zUniOp = "NOTNULL"; break; + + case TK_COLLATE: { + sqlite3TreeViewLine(pView, "COLLATE %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + break; + } - pSrc = p->pSrc; - if( ALWAYS(pSrc) ){ - for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - if( sqlite3WalkSelect(pWalker, pItem->pSelect) ){ - return WRC_Abort; + case TK_AGG_FUNCTION: + case TK_FUNCTION: { + ExprList *pFarg; /* List of function arguments */ + if( ExprHasProperty(pExpr, EP_TokenOnly) ){ + pFarg = 0; + }else{ + pFarg = pExpr->x.pList; + } + if( pExpr->op==TK_AGG_FUNCTION ){ + sqlite3TreeViewLine(pView, "AGG_FUNCTION%d %Q", + pExpr->op2, pExpr->u.zToken); + }else{ + sqlite3TreeViewLine(pView, "FUNCTION %Q", pExpr->u.zToken); } + if( pFarg ){ + sqlite3TreeViewExprList(pView, pFarg, 0, 0); + } + break; } - } - return WRC_Continue; -} +#ifndef SQLITE_OMIT_SUBQUERY + case TK_EXISTS: { + sqlite3TreeViewLine(pView, "EXISTS-expr"); + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); + break; + } + case TK_SELECT: { + sqlite3TreeViewLine(pView, "SELECT-expr"); + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); + break; + } + case TK_IN: { + sqlite3TreeViewLine(pView, "IN"); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); + }else{ + sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0); + } + break; + } +#endif /* SQLITE_OMIT_SUBQUERY */ -/* -** Call sqlite3WalkExpr() for every expression in Select statement p. -** Invoke sqlite3WalkSelect() for subqueries in the FROM clause and -** on the compound select chain, p->pPrior. -** -** Return WRC_Continue under normal conditions. Return WRC_Abort if -** there is an abort request. -** -** If the Walker does not have an xSelectCallback() then this routine -** is a no-op returning WRC_Continue. -*/ -SQLITE_PRIVATE int sqlite3WalkSelect(Walker *pWalker, Select *p){ - int rc; - if( p==0 || pWalker->xSelectCallback==0 ) return WRC_Continue; - rc = WRC_Continue; - while( p ){ - rc = pWalker->xSelectCallback(pWalker, p); - if( rc ) break; - if( sqlite3WalkSelectExpr(pWalker, p) ) return WRC_Abort; - if( sqlite3WalkSelectFrom(pWalker, p) ) return WRC_Abort; - p = p->pPrior; + /* + ** x BETWEEN y AND z + ** + ** This is equivalent to + ** + ** x>=y AND x<=z + ** + ** X is stored in pExpr->pLeft. + ** Y is stored in pExpr->pList->a[0].pExpr. + ** Z is stored in pExpr->pList->a[1].pExpr. + */ + case TK_BETWEEN: { + Expr *pX = pExpr->pLeft; + Expr *pY = pExpr->x.pList->a[0].pExpr; + Expr *pZ = pExpr->x.pList->a[1].pExpr; + sqlite3TreeViewLine(pView, "BETWEEN"); + sqlite3TreeViewExpr(pView, pX, 1); + sqlite3TreeViewExpr(pView, pY, 1); + sqlite3TreeViewExpr(pView, pZ, 0); + break; + } + case TK_TRIGGER: { + /* If the opcode is TK_TRIGGER, then the expression is a reference + ** to a column in the new.* or old.* pseudo-tables available to + ** trigger programs. In this case Expr.iTable is set to 1 for the + ** new.* pseudo-table, or 0 for the old.* pseudo-table. Expr.iColumn + ** is set to the column of the pseudo-table to read, or to -1 to + ** read the rowid field. + */ + sqlite3TreeViewLine(pView, "%s(%d)", + pExpr->iTable ? "NEW" : "OLD", pExpr->iColumn); + break; + } + case TK_CASE: { + sqlite3TreeViewLine(pView, "CASE"); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); + sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0); + break; + } +#ifndef SQLITE_OMIT_TRIGGER + case TK_RAISE: { + const char *zType = "unk"; + switch( pExpr->affinity ){ + case OE_Rollback: zType = "rollback"; break; + case OE_Abort: zType = "abort"; break; + case OE_Fail: zType = "fail"; break; + case OE_Ignore: zType = "ignore"; break; + } + sqlite3TreeViewLine(pView, "RAISE %s(%Q)", zType, pExpr->u.zToken); + break; + } +#endif + default: { + sqlite3TreeViewLine(pView, "op=%d", pExpr->op); + break; + } + } + if( zBinOp ){ + sqlite3TreeViewLine(pView, "%s", zBinOp); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); + sqlite3TreeViewExpr(pView, pExpr->pRight, 0); + }else if( zUniOp ){ + sqlite3TreeViewLine(pView, "%s", zUniOp); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + } + sqlite3TreeViewPop(pView); +} +#endif /* SQLITE_DEBUG */ + +#ifdef SQLITE_DEBUG +/* +** Generate a human-readable explanation of an expression list. +*/ +SQLITE_PRIVATE void sqlite3TreeViewExprList( + TreeView *pView, + const ExprList *pList, + u8 moreToFollow, + const char *zLabel +){ + int i; + pView = sqlite3TreeViewPush(pView, moreToFollow); + if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST"; + if( pList==0 ){ + sqlite3TreeViewLine(pView, "%s (empty)", zLabel); + }else{ + sqlite3TreeViewLine(pView, "%s", zLabel); + for(i=0; inExpr; i++){ + sqlite3TreeViewExpr(pView, pList->a[i].pExpr, inExpr-1); +#if 0 + if( pList->a[i].zName ){ + sqlite3ExplainPrintf(pOut, " AS %s", pList->a[i].zName); + } + if( pList->a[i].bSpanIsTab ){ + sqlite3ExplainPrintf(pOut, " (%s)", pList->a[i].zSpan); + } +#endif + } } - return rc & WRC_Abort; + sqlite3TreeViewPop(pView); } +#endif /* SQLITE_DEBUG */ -/************** End of walker.c **********************************************/ -/************** Begin file resolve.c *****************************************/ /* -** 2008 August 18 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** Generate code that pushes the value of every element of the given +** expression list into a sequence of registers beginning at target. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Return the number of elements evaluated. ** -************************************************************************* +** The SQLITE_ECEL_DUP flag prevents the arguments from being +** filled using OP_SCopy. OP_Copy must be used instead. ** -** This file contains routines used for walking the parser tree and -** resolve all identifiers by associating them with a particular -** table and column. +** The SQLITE_ECEL_FACTOR argument allows constant arguments to be +** factored out into initialization code. */ +SQLITE_PRIVATE int sqlite3ExprCodeExprList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* The expression list to be coded */ + int target, /* Where to write results */ + u8 flags /* SQLITE_ECEL_* flags */ +){ + struct ExprList_item *pItem; + int i, n; + u8 copyOp = (flags & SQLITE_ECEL_DUP) ? OP_Copy : OP_SCopy; + assert( pList!=0 ); + assert( target>0 ); + assert( pParse->pVdbe!=0 ); /* Never gets this far otherwise */ + n = pList->nExpr; + if( !ConstFactorOk(pParse) ) flags &= ~SQLITE_ECEL_FACTOR; + for(pItem=pList->a, i=0; ipExpr; + if( (flags & SQLITE_ECEL_FACTOR)!=0 && sqlite3ExprIsConstant(pExpr) ){ + sqlite3ExprCodeAtInit(pParse, pExpr, target+i, 0); + }else{ + int inReg = sqlite3ExprCodeTarget(pParse, pExpr, target+i); + if( inReg!=target+i ){ + VdbeOp *pOp; + Vdbe *v = pParse->pVdbe; + if( copyOp==OP_Copy + && (pOp=sqlite3VdbeGetOp(v, -1))->opcode==OP_Copy + && pOp->p1+pOp->p3+1==inReg + && pOp->p2+pOp->p3+1==target+i + ){ + pOp->p3++; + }else{ + sqlite3VdbeAddOp2(v, copyOp, inReg, target+i); + } + } + } + } + return n; +} /* -** Turn the pExpr expression into an alias for the iCol-th column of the -** result set in pEList. -** -** If the result set column is a simple column reference, then this routine -** makes an exact copy. But for any other kind of expression, this -** routine make a copy of the result set column as the argument to the -** TK_AS operator. The TK_AS operator causes the expression to be -** evaluated just once and then reused for each alias. -** -** The reason for suppressing the TK_AS term when the expression is a simple -** column reference is so that the column reference will be recognized as -** usable by indices within the WHERE clause processing logic. -** -** Hack: The TK_AS operator is inhibited if zType[0]=='G'. This means -** that in a GROUP BY clause, the expression is evaluated twice. Hence: +** Generate code for a BETWEEN operator. ** -** SELECT random()%5 AS x, count(*) FROM tab GROUP BY x +** x BETWEEN y AND z ** -** Is equivalent to: +** The above is equivalent to ** -** SELECT random()%5 AS x, count(*) FROM tab GROUP BY random()%5 +** x>=y AND x<=z ** -** The result of random()%5 in the GROUP BY clause is probably different -** from the result in the result-set. We might fix this someday. Or -** then again, we might not... +** Code it as such, taking care to do the common subexpression +** elimination of x. */ -static void resolveAlias( - Parse *pParse, /* Parsing context */ - ExprList *pEList, /* A result set */ - int iCol, /* A column in the result set. 0..pEList->nExpr-1 */ - Expr *pExpr, /* Transform this into an alias to the result set */ - const char *zType /* "GROUP" or "ORDER" or "" */ +static void exprCodeBetween( + Parse *pParse, /* Parsing and code generating context */ + Expr *pExpr, /* The BETWEEN expression */ + int dest, /* Jump here if the jump is taken */ + int jumpIfTrue, /* Take the jump if the BETWEEN is true */ + int jumpIfNull /* Take the jump if the BETWEEN is NULL */ ){ - Expr *pOrig; /* The iCol-th column of the result set */ - Expr *pDup; /* Copy of pOrig */ - sqlite3 *db; /* The database connection */ + Expr exprAnd; /* The AND operator in x>=y AND x<=z */ + Expr compLeft; /* The x>=y term */ + Expr compRight; /* The x<=z term */ + Expr exprX; /* The x subexpression */ + int regFree1 = 0; /* Temporary use register */ - assert( iCol>=0 && iColnExpr ); - pOrig = pEList->a[iCol].pExpr; - assert( pOrig!=0 ); - assert( pOrig->flags & EP_Resolved ); - db = pParse->db; - if( pOrig->op!=TK_COLUMN && zType[0]!='G' ){ - pDup = sqlite3ExprDup(db, pOrig, 0); - pDup = sqlite3PExpr(pParse, TK_AS, pDup, 0, 0); - if( pDup==0 ) return; - if( pEList->a[iCol].iAlias==0 ){ - pEList->a[iCol].iAlias = (u16)(++pParse->nAlias); - } - pDup->iTable = pEList->a[iCol].iAlias; - }else if( ExprHasProperty(pOrig, EP_IntValue) || pOrig->u.zToken==0 ){ - pDup = sqlite3ExprDup(db, pOrig, 0); - if( pDup==0 ) return; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + exprX = *pExpr->pLeft; + exprAnd.op = TK_AND; + exprAnd.pLeft = &compLeft; + exprAnd.pRight = &compRight; + compLeft.op = TK_GE; + compLeft.pLeft = &exprX; + compLeft.pRight = pExpr->x.pList->a[0].pExpr; + compRight.op = TK_LE; + compRight.pLeft = &exprX; + compRight.pRight = pExpr->x.pList->a[1].pExpr; + exprToRegister(&exprX, sqlite3ExprCodeTemp(pParse, &exprX, ®Free1)); + if( jumpIfTrue ){ + sqlite3ExprIfTrue(pParse, &exprAnd, dest, jumpIfNull); }else{ - char *zToken = pOrig->u.zToken; - assert( zToken!=0 ); - pOrig->u.zToken = 0; - pDup = sqlite3ExprDup(db, pOrig, 0); - pOrig->u.zToken = zToken; - if( pDup==0 ) return; - assert( (pDup->flags & (EP_Reduced|EP_TokenOnly))==0 ); - pDup->flags2 |= EP2_MallocedToken; - pDup->u.zToken = sqlite3DbStrDup(db, zToken); - } - if( pExpr->flags & EP_ExpCollate ){ - pDup->pColl = pExpr->pColl; - pDup->flags |= EP_ExpCollate; + sqlite3ExprIfFalse(pParse, &exprAnd, dest, jumpIfNull); } + sqlite3ReleaseTempReg(pParse, regFree1); - /* Before calling sqlite3ExprDelete(), set the EP_Static flag. This - ** prevents ExprDelete() from deleting the Expr structure itself, - ** allowing it to be repopulated by the memcpy() on the following line. - */ - ExprSetProperty(pExpr, EP_Static); - sqlite3ExprDelete(db, pExpr); - memcpy(pExpr, pDup, sizeof(*pExpr)); - sqlite3DbFree(db, pDup); + /* Ensure adequate test coverage */ + testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1==0 ); + testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1!=0 ); + testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1==0 ); + testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1!=0 ); + testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1==0 ); + testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1!=0 ); + testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1==0 ); + testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1!=0 ); } /* -** Given the name of a column of the form X.Y.Z or Y.Z or just Z, look up -** that name in the set of source tables in pSrcList and make the pExpr -** expression node refer back to that source column. The following changes -** are made to pExpr: -** -** pExpr->iDb Set the index in db->aDb[] of the database X -** (even if X is implied). -** pExpr->iTable Set to the cursor number for the table obtained -** from pSrcList. -** pExpr->pTab Points to the Table structure of X.Y (even if -** X and/or Y are implied.) -** pExpr->iColumn Set to the column number within the table. -** pExpr->op Set to TK_COLUMN. -** pExpr->pLeft Any expression this points to is deleted -** pExpr->pRight Any expression this points to is deleted. +** Generate code for a boolean expression such that a jump is made +** to the label "dest" if the expression is true but execution +** continues straight thru if the expression is false. ** -** The zDb variable is the name of the database (the "X"). This value may be -** NULL meaning that name is of the form Y.Z or Z. Any available database -** can be used. The zTable variable is the name of the table (the "Y"). This -** value can be NULL if zDb is also NULL. If zTable is NULL it -** means that the form of the name is Z and that columns from any table -** can be used. +** If the expression evaluates to NULL (neither true nor false), then +** take the jump if the jumpIfNull flag is SQLITE_JUMPIFNULL. ** -** If the name cannot be resolved unambiguously, leave an error message -** in pParse and return WRC_Abort. Return WRC_Prune on success. +** This code depends on the fact that certain token values (ex: TK_EQ) +** are the same as opcode values (ex: OP_Eq) that implement the corresponding +** operation. Special comments in vdbe.c and the mkopcodeh.awk script in +** the make process cause these values to align. Assert()s in the code +** below verify that the numbers are aligned correctly. */ -static int lookupName( - Parse *pParse, /* The parsing context */ - const char *zDb, /* Name of the database containing table, or NULL */ - const char *zTab, /* Name of table containing column, or NULL */ - const char *zCol, /* Name of the column. */ - NameContext *pNC, /* The name context used to resolve the name */ - Expr *pExpr /* Make this EXPR node point to the selected column */ -){ - int i, j; /* Loop counters */ - int cnt = 0; /* Number of matching column names */ - int cntTab = 0; /* Number of matching table names */ - sqlite3 *db = pParse->db; /* The database connection */ - struct SrcList_item *pItem; /* Use for looping over pSrcList items */ - struct SrcList_item *pMatch = 0; /* The matching pSrcList item */ - NameContext *pTopNC = pNC; /* First namecontext in the list */ - Schema *pSchema = 0; /* Schema of the expression */ - int isTrigger = 0; +SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse *pParse, Expr *pExpr, int dest, int jumpIfNull){ + Vdbe *v = pParse->pVdbe; + int op = 0; + int regFree1 = 0; + int regFree2 = 0; + int r1, r2; - assert( pNC ); /* the name context cannot be NULL. */ - assert( zCol ); /* The Z in X.Y.Z cannot be NULL */ - assert( ~ExprHasAnyProperty(pExpr, EP_TokenOnly|EP_Reduced) ); + assert( jumpIfNull==SQLITE_JUMPIFNULL || jumpIfNull==0 ); + if( NEVER(v==0) ) return; /* Existence of VDBE checked by caller */ + if( NEVER(pExpr==0) ) return; /* No way this can happen */ + op = pExpr->op; + switch( op ){ + case TK_AND: { + int d2 = sqlite3VdbeMakeLabel(v); + testcase( jumpIfNull==0 ); + sqlite3ExprIfFalse(pParse, pExpr->pLeft, d2,jumpIfNull^SQLITE_JUMPIFNULL); + sqlite3ExprCachePush(pParse); + sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); + sqlite3VdbeResolveLabel(v, d2); + sqlite3ExprCachePop(pParse); + break; + } + case TK_OR: { + testcase( jumpIfNull==0 ); + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); + sqlite3ExprCachePush(pParse); + sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); + sqlite3ExprCachePop(pParse); + break; + } + case TK_NOT: { + testcase( jumpIfNull==0 ); + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); + break; + } + case TK_LT: + case TK_LE: + case TK_GT: + case TK_GE: + case TK_NE: + case TK_EQ: { + testcase( jumpIfNull==0 ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, dest, jumpIfNull); + assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt); + assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le); + assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt); + assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge); + assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq); + assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_IS: + case TK_ISNOT: { + testcase( op==TK_IS ); + testcase( op==TK_ISNOT ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + op = (op==TK_IS) ? TK_EQ : TK_NE; + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, dest, SQLITE_NULLEQ); + VdbeCoverageIf(v, op==TK_EQ); + VdbeCoverageIf(v, op==TK_NE); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_ISNULL: + case TK_NOTNULL: { + assert( TK_ISNULL==OP_IsNull ); testcase( op==TK_ISNULL ); + assert( TK_NOTNULL==OP_NotNull ); testcase( op==TK_NOTNULL ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + sqlite3VdbeAddOp2(v, op, r1, dest); + VdbeCoverageIf(v, op==TK_ISNULL); + VdbeCoverageIf(v, op==TK_NOTNULL); + testcase( regFree1==0 ); + break; + } + case TK_BETWEEN: { + testcase( jumpIfNull==0 ); + exprCodeBetween(pParse, pExpr, dest, 1, jumpIfNull); + break; + } +#ifndef SQLITE_OMIT_SUBQUERY + case TK_IN: { + int destIfFalse = sqlite3VdbeMakeLabel(v); + int destIfNull = jumpIfNull ? dest : destIfFalse; + sqlite3ExprCodeIN(pParse, pExpr, destIfFalse, destIfNull); + sqlite3VdbeAddOp2(v, OP_Goto, 0, dest); + sqlite3VdbeResolveLabel(v, destIfFalse); + break; + } +#endif + default: { + if( exprAlwaysTrue(pExpr) ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, dest); + }else if( exprAlwaysFalse(pExpr) ){ + /* No-op */ + }else{ + r1 = sqlite3ExprCodeTemp(pParse, pExpr, ®Free1); + sqlite3VdbeAddOp3(v, OP_If, r1, dest, jumpIfNull!=0); + VdbeCoverage(v); + testcase( regFree1==0 ); + testcase( jumpIfNull==0 ); + } + break; + } + } + sqlite3ReleaseTempReg(pParse, regFree1); + sqlite3ReleaseTempReg(pParse, regFree2); +} - /* Initialize the node to no-match */ - pExpr->iTable = -1; - pExpr->pTab = 0; - ExprSetIrreducible(pExpr); +/* +** Generate code for a boolean expression such that a jump is made +** to the label "dest" if the expression is false but execution +** continues straight thru if the expression is true. +** +** If the expression evaluates to NULL (neither true nor false) then +** jump if jumpIfNull is SQLITE_JUMPIFNULL or fall through if jumpIfNull +** is 0. +*/ +SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse *pParse, Expr *pExpr, int dest, int jumpIfNull){ + Vdbe *v = pParse->pVdbe; + int op = 0; + int regFree1 = 0; + int regFree2 = 0; + int r1, r2; - /* Start at the inner-most context and move outward until a match is found */ - while( pNC && cnt==0 ){ - ExprList *pEList; - SrcList *pSrcList = pNC->pSrcList; + assert( jumpIfNull==SQLITE_JUMPIFNULL || jumpIfNull==0 ); + if( NEVER(v==0) ) return; /* Existence of VDBE checked by caller */ + if( pExpr==0 ) return; - if( pSrcList ){ - for(i=0, pItem=pSrcList->a; inSrc; i++, pItem++){ - Table *pTab; - int iDb; - Column *pCol; - - pTab = pItem->pTab; - assert( pTab!=0 && pTab->zName!=0 ); - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - assert( pTab->nCol>0 ); - if( zTab ){ - if( pItem->zAlias ){ - char *zTabName = pItem->zAlias; - if( sqlite3StrICmp(zTabName, zTab)!=0 ) continue; - }else{ - char *zTabName = pTab->zName; - if( NEVER(zTabName==0) || sqlite3StrICmp(zTabName, zTab)!=0 ){ - continue; - } - if( zDb!=0 && sqlite3StrICmp(db->aDb[iDb].zName, zDb)!=0 ){ - continue; - } - } - } - if( 0==(cntTab++) ){ - pExpr->iTable = pItem->iCursor; - pExpr->pTab = pTab; - pSchema = pTab->pSchema; - pMatch = pItem; - } - for(j=0, pCol=pTab->aCol; jnCol; j++, pCol++){ - if( sqlite3StrICmp(pCol->zName, zCol)==0 ){ - IdList *pUsing; - cnt++; - pExpr->iTable = pItem->iCursor; - pExpr->pTab = pTab; - pMatch = pItem; - pSchema = pTab->pSchema; - /* Substitute the rowid (column -1) for the INTEGER PRIMARY KEY */ - pExpr->iColumn = j==pTab->iPKey ? -1 : (i16)j; - if( inSrc-1 ){ - if( pItem[1].jointype & JT_NATURAL ){ - /* If this match occurred in the left table of a natural join, - ** then skip the right table to avoid a duplicate match */ - pItem++; - i++; - }else if( (pUsing = pItem[1].pUsing)!=0 ){ - /* If this match occurs on a column that is in the USING clause - ** of a join, skip the search of the right table of the join - ** to avoid a duplicate match there. */ - int k; - for(k=0; knId; k++){ - if( sqlite3StrICmp(pUsing->a[k].zName, zCol)==0 ){ - pItem++; - i++; - break; - } - } - } - } - break; - } - } - } - } + /* The value of pExpr->op and op are related as follows: + ** + ** pExpr->op op + ** --------- ---------- + ** TK_ISNULL OP_NotNull + ** TK_NOTNULL OP_IsNull + ** TK_NE OP_Eq + ** TK_EQ OP_Ne + ** TK_GT OP_Le + ** TK_LE OP_Gt + ** TK_GE OP_Lt + ** TK_LT OP_Ge + ** + ** For other values of pExpr->op, op is undefined and unused. + ** The value of TK_ and OP_ constants are arranged such that we + ** can compute the mapping above using the following expression. + ** Assert()s verify that the computation is correct. + */ + op = ((pExpr->op+(TK_ISNULL&1))^1)-(TK_ISNULL&1); -#ifndef SQLITE_OMIT_TRIGGER - /* If we have not already resolved the name, then maybe - ** it is a new.* or old.* trigger argument reference - */ - if( zDb==0 && zTab!=0 && cnt==0 && pParse->pTriggerTab!=0 ){ - int op = pParse->eTriggerOp; - Table *pTab = 0; - assert( op==TK_DELETE || op==TK_UPDATE || op==TK_INSERT ); - if( op!=TK_DELETE && sqlite3StrICmp("new",zTab) == 0 ){ - pExpr->iTable = 1; - pTab = pParse->pTriggerTab; - }else if( op!=TK_INSERT && sqlite3StrICmp("old",zTab)==0 ){ - pExpr->iTable = 0; - pTab = pParse->pTriggerTab; - } + /* Verify correct alignment of TK_ and OP_ constants + */ + assert( pExpr->op!=TK_ISNULL || op==OP_NotNull ); + assert( pExpr->op!=TK_NOTNULL || op==OP_IsNull ); + assert( pExpr->op!=TK_NE || op==OP_Eq ); + assert( pExpr->op!=TK_EQ || op==OP_Ne ); + assert( pExpr->op!=TK_LT || op==OP_Ge ); + assert( pExpr->op!=TK_LE || op==OP_Gt ); + assert( pExpr->op!=TK_GT || op==OP_Le ); + assert( pExpr->op!=TK_GE || op==OP_Lt ); - if( pTab ){ - int iCol; - pSchema = pTab->pSchema; - cntTab++; - for(iCol=0; iColnCol; iCol++){ - Column *pCol = &pTab->aCol[iCol]; - if( sqlite3StrICmp(pCol->zName, zCol)==0 ){ - if( iCol==pTab->iPKey ){ - iCol = -1; - } - break; - } - } - if( iCol>=pTab->nCol && sqlite3IsRowid(zCol) ){ - iCol = -1; /* IMP: R-44911-55124 */ - } - if( iColnCol ){ - cnt++; - if( iCol<0 ){ - pExpr->affinity = SQLITE_AFF_INTEGER; - }else if( pExpr->iTable==0 ){ - testcase( iCol==31 ); - testcase( iCol==32 ); - pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<iColumn = (i16)iCol; - pExpr->pTab = pTab; - isTrigger = 1; - } - } + switch( pExpr->op ){ + case TK_AND: { + testcase( jumpIfNull==0 ); + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); + sqlite3ExprCachePush(pParse); + sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); + sqlite3ExprCachePop(pParse); + break; } -#endif /* !defined(SQLITE_OMIT_TRIGGER) */ - - /* - ** Perhaps the name is a reference to the ROWID - */ - if( cnt==0 && cntTab==1 && sqlite3IsRowid(zCol) ){ - cnt = 1; - pExpr->iColumn = -1; /* IMP: R-44911-55124 */ - pExpr->affinity = SQLITE_AFF_INTEGER; + case TK_OR: { + int d2 = sqlite3VdbeMakeLabel(v); + testcase( jumpIfNull==0 ); + sqlite3ExprIfTrue(pParse, pExpr->pLeft, d2, jumpIfNull^SQLITE_JUMPIFNULL); + sqlite3ExprCachePush(pParse); + sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); + sqlite3VdbeResolveLabel(v, d2); + sqlite3ExprCachePop(pParse); + break; } - - /* - ** If the input is of the form Z (not Y.Z or X.Y.Z) then the name Z - ** might refer to an result-set alias. This happens, for example, when - ** we are resolving names in the WHERE clause of the following command: - ** - ** SELECT a+b AS x FROM table WHERE x<10; - ** - ** In cases like this, replace pExpr with a copy of the expression that - ** forms the result set entry ("a+b" in the example) and return immediately. - ** Note that the expression in the result set should have already been - ** resolved by the time the WHERE clause is resolved. - */ - if( cnt==0 && (pEList = pNC->pEList)!=0 && zTab==0 ){ - for(j=0; jnExpr; j++){ - char *zAs = pEList->a[j].zName; - if( zAs!=0 && sqlite3StrICmp(zAs, zCol)==0 ){ - Expr *pOrig; - assert( pExpr->pLeft==0 && pExpr->pRight==0 ); - assert( pExpr->x.pList==0 ); - assert( pExpr->x.pSelect==0 ); - pOrig = pEList->a[j].pExpr; - if( !pNC->allowAgg && ExprHasProperty(pOrig, EP_Agg) ){ - sqlite3ErrorMsg(pParse, "misuse of aliased aggregate %s", zAs); - return WRC_Abort; - } - resolveAlias(pParse, pEList, j, pExpr, ""); - cnt = 1; - pMatch = 0; - assert( zTab==0 && zDb==0 ); - goto lookupname_end; - } - } + case TK_NOT: { + testcase( jumpIfNull==0 ); + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); + break; + } + case TK_LT: + case TK_LE: + case TK_GT: + case TK_GE: + case TK_NE: + case TK_EQ: { + testcase( jumpIfNull==0 ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, dest, jumpIfNull); + assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt); + assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le); + assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt); + assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge); + assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq); + assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_IS: + case TK_ISNOT: { + testcase( pExpr->op==TK_IS ); + testcase( pExpr->op==TK_ISNOT ); + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); + op = (pExpr->op==TK_IS) ? TK_NE : TK_EQ; + codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, + r1, r2, dest, SQLITE_NULLEQ); + VdbeCoverageIf(v, op==TK_EQ); + VdbeCoverageIf(v, op==TK_NE); + testcase( regFree1==0 ); + testcase( regFree2==0 ); + break; + } + case TK_ISNULL: + case TK_NOTNULL: { + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + sqlite3VdbeAddOp2(v, op, r1, dest); + testcase( op==TK_ISNULL ); VdbeCoverageIf(v, op==TK_ISNULL); + testcase( op==TK_NOTNULL ); VdbeCoverageIf(v, op==TK_NOTNULL); + testcase( regFree1==0 ); + break; + } + case TK_BETWEEN: { + testcase( jumpIfNull==0 ); + exprCodeBetween(pParse, pExpr, dest, 0, jumpIfNull); + break; + } +#ifndef SQLITE_OMIT_SUBQUERY + case TK_IN: { + if( jumpIfNull ){ + sqlite3ExprCodeIN(pParse, pExpr, dest, dest); + }else{ + int destIfNull = sqlite3VdbeMakeLabel(v); + sqlite3ExprCodeIN(pParse, pExpr, dest, destIfNull); + sqlite3VdbeResolveLabel(v, destIfNull); + } + break; } - - /* Advance to the next name context. The loop will exit when either - ** we have a match (cnt>0) or when we run out of name contexts. - */ - if( cnt==0 ){ - pNC = pNC->pNext; +#endif + default: { + if( exprAlwaysFalse(pExpr) ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, dest); + }else if( exprAlwaysTrue(pExpr) ){ + /* no-op */ + }else{ + r1 = sqlite3ExprCodeTemp(pParse, pExpr, ®Free1); + sqlite3VdbeAddOp3(v, OP_IfNot, r1, dest, jumpIfNull!=0); + VdbeCoverage(v); + testcase( regFree1==0 ); + testcase( jumpIfNull==0 ); + } + break; } } + sqlite3ReleaseTempReg(pParse, regFree1); + sqlite3ReleaseTempReg(pParse, regFree2); +} - /* - ** If X and Y are NULL (in other words if only the column name Z is - ** supplied) and the value of Z is enclosed in double-quotes, then - ** Z is a string literal if it doesn't match any column names. In that - ** case, we need to return right away and not make any changes to - ** pExpr. - ** - ** Because no reference was made to outer contexts, the pNC->nRef - ** fields are not changed in any context. - */ - if( cnt==0 && zTab==0 && ExprHasProperty(pExpr,EP_DblQuoted) ){ - pExpr->op = TK_STRING; - pExpr->pTab = 0; - return WRC_Prune; +/* +** Do a deep comparison of two expression trees. Return 0 if the two +** expressions are completely identical. Return 1 if they differ only +** by a COLLATE operator at the top level. Return 2 if there are differences +** other than the top-level COLLATE operator. +** +** If any subelement of pB has Expr.iTable==(-1) then it is allowed +** to compare equal to an equivalent element in pA with Expr.iTable==iTab. +** +** The pA side might be using TK_REGISTER. If that is the case and pB is +** not using TK_REGISTER but is otherwise equivalent, then still return 0. +** +** Sometimes this routine will return 2 even if the two expressions +** really are equivalent. If we cannot prove that the expressions are +** identical, we return 2 just to be safe. So if this routine +** returns 2, then you do not really know for certain if the two +** expressions are the same. But if you get a 0 or 1 return, then you +** can be sure the expressions are the same. In the places where +** this routine is used, it does not hurt to get an extra 2 - that +** just might result in some slightly slower code. But returning +** an incorrect 0 or 1 could lead to a malfunction. +*/ +SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB, int iTab){ + u32 combinedFlags; + if( pA==0 || pB==0 ){ + return pB==pA ? 0 : 2; } - - /* - ** cnt==0 means there was not match. cnt>1 means there were two or - ** more matches. Either way, we have an error. - */ - if( cnt!=1 ){ - const char *zErr; - zErr = cnt==0 ? "no such column" : "ambiguous column name"; - if( zDb ){ - sqlite3ErrorMsg(pParse, "%s: %s.%s.%s", zErr, zDb, zTab, zCol); - }else if( zTab ){ - sqlite3ErrorMsg(pParse, "%s: %s.%s", zErr, zTab, zCol); - }else{ - sqlite3ErrorMsg(pParse, "%s: %s", zErr, zCol); + combinedFlags = pA->flags | pB->flags; + if( combinedFlags & EP_IntValue ){ + if( (pA->flags&pB->flags&EP_IntValue)!=0 && pA->u.iValue==pB->u.iValue ){ + return 0; } - pParse->checkSchema = 1; - pTopNC->nErr++; + return 2; } - - /* If a column from a table in pSrcList is referenced, then record - ** this fact in the pSrcList.a[].colUsed bitmask. Column 0 causes - ** bit 0 to be set. Column 1 sets bit 1. And so forth. If the - ** column number is greater than the number of bits in the bitmask - ** then set the high-order bit of the bitmask. - */ - if( pExpr->iColumn>=0 && pMatch!=0 ){ - int n = pExpr->iColumn; - testcase( n==BMS-1 ); - if( n>=BMS ){ - n = BMS-1; + if( pA->op!=pB->op ){ + if( pA->op==TK_COLLATE && sqlite3ExprCompare(pA->pLeft, pB, iTab)<2 ){ + return 1; } - assert( pMatch->iCursor==pExpr->iTable ); - pMatch->colUsed |= ((Bitmask)1)<op==TK_COLLATE && sqlite3ExprCompare(pA, pB->pLeft, iTab)<2 ){ + return 1; + } + return 2; } - - /* Clean up and return - */ - sqlite3ExprDelete(db, pExpr->pLeft); - pExpr->pLeft = 0; - sqlite3ExprDelete(db, pExpr->pRight); - pExpr->pRight = 0; - pExpr->op = (isTrigger ? TK_TRIGGER : TK_COLUMN); -lookupname_end: - if( cnt==1 ){ - assert( pNC!=0 ); - sqlite3AuthRead(pParse, pExpr, pSchema, pNC->pSrcList); - /* Increment the nRef value on all name contexts from TopNC up to - ** the point where the name matched. */ - for(;;){ - assert( pTopNC!=0 ); - pTopNC->nRef++; - if( pTopNC==pNC ) break; - pTopNC = pTopNC->pNext; + if( pA->op!=TK_COLUMN && ALWAYS(pA->op!=TK_AGG_COLUMN) && pA->u.zToken ){ + if( strcmp(pA->u.zToken,pB->u.zToken)!=0 ){ + return pA->op==TK_COLLATE ? 1 : 2; + } + } + if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2; + if( ALWAYS((combinedFlags & EP_TokenOnly)==0) ){ + if( combinedFlags & EP_xIsSelect ) return 2; + if( sqlite3ExprCompare(pA->pLeft, pB->pLeft, iTab) ) return 2; + if( sqlite3ExprCompare(pA->pRight, pB->pRight, iTab) ) return 2; + if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList, iTab) ) return 2; + if( ALWAYS((combinedFlags & EP_Reduced)==0) ){ + if( pA->iColumn!=pB->iColumn ) return 2; + if( pA->iTable!=pB->iTable + && (pA->iTable!=iTab || NEVER(pB->iTable>=0)) ) return 2; } - return WRC_Prune; - } else { - return WRC_Abort; } + return 0; } /* -** Allocate and return a pointer to an expression to load the column iCol -** from datasource iSrc in SrcList pSrc. +** Compare two ExprList objects. Return 0 if they are identical and +** non-zero if they differ in any way. +** +** If any subelement of pB has Expr.iTable==(-1) then it is allowed +** to compare equal to an equivalent element in pA with Expr.iTable==iTab. +** +** This routine might return non-zero for equivalent ExprLists. The +** only consequence will be disabled optimizations. But this routine +** must never return 0 if the two ExprList objects are different, or +** a malfunction will result. +** +** Two NULL pointers are considered to be the same. But a NULL pointer +** always differs from a non-NULL pointer. */ -SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *db, SrcList *pSrc, int iSrc, int iCol){ - Expr *p = sqlite3ExprAlloc(db, TK_COLUMN, 0, 0); - if( p ){ - struct SrcList_item *pItem = &pSrc->a[iSrc]; - p->pTab = pItem->pTab; - p->iTable = pItem->iCursor; - if( p->pTab->iPKey==iCol ){ - p->iColumn = -1; - }else{ - p->iColumn = (ynVar)iCol; - testcase( iCol==BMS ); - testcase( iCol==BMS-1 ); - pItem->colUsed |= ((Bitmask)1)<<(iCol>=BMS ? BMS-1 : iCol); - } - ExprSetProperty(p, EP_Resolved); +SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList *pA, ExprList *pB, int iTab){ + int i; + if( pA==0 && pB==0 ) return 0; + if( pA==0 || pB==0 ) return 1; + if( pA->nExpr!=pB->nExpr ) return 1; + for(i=0; inExpr; i++){ + Expr *pExprA = pA->a[i].pExpr; + Expr *pExprB = pB->a[i].pExpr; + if( pA->a[i].sortOrder!=pB->a[i].sortOrder ) return 1; + if( sqlite3ExprCompare(pExprA, pExprB, iTab) ) return 1; } - return p; + return 0; } /* -** This routine is callback for sqlite3WalkExpr(). +** Return true if we can prove the pE2 will always be true if pE1 is +** true. Return false if we cannot complete the proof or if pE2 might +** be false. Examples: ** -** Resolve symbolic names into TK_COLUMN operators for the current -** node in the expression tree. Return 0 to continue the search down -** the tree or 2 to abort the tree walk. +** pE1: x==5 pE2: x==5 Result: true +** pE1: x>0 pE2: x==5 Result: false +** pE1: x=21 pE2: x=21 OR y=43 Result: true +** pE1: x!=123 pE2: x IS NOT NULL Result: true +** pE1: x!=?1 pE2: x IS NOT NULL Result: true +** pE1: x IS NULL pE2: x IS NOT NULL Result: false +** pE1: x IS ?2 pE2: x IS NOT NULL Reuslt: false ** -** This routine also does error checking and name resolution for -** function names. The operator for aggregate functions is changed -** to TK_AGG_FUNCTION. +** When comparing TK_COLUMN nodes between pE1 and pE2, if pE2 has +** Expr.iTable<0 then assume a table number given by iTab. +** +** When in doubt, return false. Returning true might give a performance +** improvement. Returning false might cause a performance reduction, but +** it will always give the correct answer and is hence always safe. */ -static int resolveExprStep(Walker *pWalker, Expr *pExpr){ - NameContext *pNC; - Parse *pParse; +SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr *pE1, Expr *pE2, int iTab){ + if( sqlite3ExprCompare(pE1, pE2, iTab)==0 ){ + return 1; + } + if( pE2->op==TK_OR + && (sqlite3ExprImpliesExpr(pE1, pE2->pLeft, iTab) + || sqlite3ExprImpliesExpr(pE1, pE2->pRight, iTab) ) + ){ + return 1; + } + if( pE2->op==TK_NOTNULL + && sqlite3ExprCompare(pE1->pLeft, pE2->pLeft, iTab)==0 + && (pE1->op!=TK_ISNULL && pE1->op!=TK_IS) + ){ + return 1; + } + return 0; +} - pNC = pWalker->u.pNC; - assert( pNC!=0 ); - pParse = pNC->pParse; - assert( pParse==pWalker->pParse ); +/* +** An instance of the following structure is used by the tree walker +** to count references to table columns in the arguments of an +** aggregate function, in order to implement the +** sqlite3FunctionThisSrc() routine. +*/ +struct SrcCount { + SrcList *pSrc; /* One particular FROM clause in a nested query */ + int nThis; /* Number of references to columns in pSrcList */ + int nOther; /* Number of references to columns in other FROM clauses */ +}; - if( ExprHasAnyProperty(pExpr, EP_Resolved) ) return WRC_Prune; - ExprSetProperty(pExpr, EP_Resolved); -#ifndef NDEBUG - if( pNC->pSrcList && pNC->pSrcList->nAlloc>0 ){ - SrcList *pSrcList = pNC->pSrcList; +/* +** Count the number of references to columns. +*/ +static int exprSrcCount(Walker *pWalker, Expr *pExpr){ + /* The NEVER() on the second term is because sqlite3FunctionUsesThisSrc() + ** is always called before sqlite3ExprAnalyzeAggregates() and so the + ** TK_COLUMNs have not yet been converted into TK_AGG_COLUMN. If + ** sqlite3FunctionUsesThisSrc() is used differently in the future, the + ** NEVER() will need to be removed. */ + if( pExpr->op==TK_COLUMN || NEVER(pExpr->op==TK_AGG_COLUMN) ){ int i; - for(i=0; ipSrcList->nSrc; i++){ - assert( pSrcList->a[i].iCursor>=0 && pSrcList->a[i].iCursornTab); + struct SrcCount *p = pWalker->u.pSrcCount; + SrcList *pSrc = p->pSrc; + for(i=0; inSrc; i++){ + if( pExpr->iTable==pSrc->a[i].iCursor ) break; + } + if( inSrc ){ + p->nThis++; + }else{ + p->nOther++; } } -#endif - switch( pExpr->op ){ + return WRC_Continue; +} -#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) - /* The special operator TK_ROW means use the rowid for the first - ** column in the FROM clause. This is used by the LIMIT and ORDER BY - ** clause processing on UPDATE and DELETE statements. - */ - case TK_ROW: { - SrcList *pSrcList = pNC->pSrcList; - struct SrcList_item *pItem; - assert( pSrcList && pSrcList->nSrc==1 ); - pItem = pSrcList->a; - pExpr->op = TK_COLUMN; - pExpr->pTab = pItem->pTab; - pExpr->iTable = pItem->iCursor; - pExpr->iColumn = -1; - pExpr->affinity = SQLITE_AFF_INTEGER; - break; - } -#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) */ +/* +** Determine if any of the arguments to the pExpr Function reference +** pSrcList. Return true if they do. Also return true if the function +** has no arguments or has only constant arguments. Return false if pExpr +** references columns but not columns of tables found in pSrcList. +*/ +SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr *pExpr, SrcList *pSrcList){ + Walker w; + struct SrcCount cnt; + assert( pExpr->op==TK_AGG_FUNCTION ); + memset(&w, 0, sizeof(w)); + w.xExprCallback = exprSrcCount; + w.u.pSrcCount = &cnt; + cnt.pSrc = pSrcList; + cnt.nThis = 0; + cnt.nOther = 0; + sqlite3WalkExprList(&w, pExpr->x.pList); + return cnt.nThis>0 || cnt.nOther==0; +} - /* A lone identifier is the name of a column. - */ - case TK_ID: { - return lookupName(pParse, 0, 0, pExpr->u.zToken, pNC, pExpr); - } - - /* A table name and column name: ID.ID - ** Or a database, table and column: ID.ID.ID - */ - case TK_DOT: { - const char *zColumn; - const char *zTable; - const char *zDb; - Expr *pRight; +/* +** Add a new element to the pAggInfo->aCol[] array. Return the index of +** the new element. Return a negative number if malloc fails. +*/ +static int addAggInfoColumn(sqlite3 *db, AggInfo *pInfo){ + int i; + pInfo->aCol = sqlite3ArrayAllocate( + db, + pInfo->aCol, + sizeof(pInfo->aCol[0]), + &pInfo->nColumn, + &i + ); + return i; +} - /* if( pSrcList==0 ) break; */ - pRight = pExpr->pRight; - if( pRight->op==TK_ID ){ - zDb = 0; - zTable = pExpr->pLeft->u.zToken; - zColumn = pRight->u.zToken; - }else{ - assert( pRight->op==TK_DOT ); - zDb = pExpr->pLeft->u.zToken; - zTable = pRight->pLeft->u.zToken; - zColumn = pRight->pRight->u.zToken; - } - return lookupName(pParse, zDb, zTable, zColumn, pNC, pExpr); - } +/* +** Add a new element to the pAggInfo->aFunc[] array. Return the index of +** the new element. Return a negative number if malloc fails. +*/ +static int addAggInfoFunc(sqlite3 *db, AggInfo *pInfo){ + int i; + pInfo->aFunc = sqlite3ArrayAllocate( + db, + pInfo->aFunc, + sizeof(pInfo->aFunc[0]), + &pInfo->nFunc, + &i + ); + return i; +} - /* Resolve function names - */ - case TK_CONST_FUNC: - case TK_FUNCTION: { - ExprList *pList = pExpr->x.pList; /* The argument list */ - int n = pList ? pList->nExpr : 0; /* Number of arguments */ - int no_such_func = 0; /* True if no such function exists */ - int wrong_num_args = 0; /* True if wrong number of arguments */ - int is_agg = 0; /* True if is an aggregate function */ - int auth; /* Authorization to use the function */ - int nId; /* Number of characters in function name */ - const char *zId; /* The function name. */ - FuncDef *pDef; /* Information about the function */ - u8 enc = ENC(pParse->db); /* The database encoding */ +/* +** This is the xExprCallback for a tree walker. It is used to +** implement sqlite3ExprAnalyzeAggregates(). See sqlite3ExprAnalyzeAggregates +** for additional information. +*/ +static int analyzeAggregate(Walker *pWalker, Expr *pExpr){ + int i; + NameContext *pNC = pWalker->u.pNC; + Parse *pParse = pNC->pParse; + SrcList *pSrcList = pNC->pSrcList; + AggInfo *pAggInfo = pNC->pAggInfo; - testcase( pExpr->op==TK_CONST_FUNC ); - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - zId = pExpr->u.zToken; - nId = sqlite3Strlen30(zId); - pDef = sqlite3FindFunction(pParse->db, zId, nId, n, enc, 0); - if( pDef==0 ){ - pDef = sqlite3FindFunction(pParse->db, zId, nId, -1, enc, 0); - if( pDef==0 ){ - no_such_func = 1; - }else{ - wrong_num_args = 1; - } - }else{ - is_agg = pDef->xFunc==0; - } -#ifndef SQLITE_OMIT_AUTHORIZATION - if( pDef ){ - auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0, pDef->zName, 0); - if( auth!=SQLITE_OK ){ - if( auth==SQLITE_DENY ){ - sqlite3ErrorMsg(pParse, "not authorized to use function: %s", - pDef->zName); - pNC->nErr++; - } - pExpr->op = TK_NULL; - return WRC_Prune; - } - } -#endif - if( is_agg && !pNC->allowAgg ){ - sqlite3ErrorMsg(pParse, "misuse of aggregate function %.*s()", nId,zId); - pNC->nErr++; - is_agg = 0; - }else if( no_such_func ){ - sqlite3ErrorMsg(pParse, "no such function: %.*s", nId, zId); - pNC->nErr++; - }else if( wrong_num_args ){ - sqlite3ErrorMsg(pParse,"wrong number of arguments to function %.*s()", - nId, zId); - pNC->nErr++; - } - if( is_agg ){ - pExpr->op = TK_AGG_FUNCTION; - pNC->hasAgg = 1; + switch( pExpr->op ){ + case TK_AGG_COLUMN: + case TK_COLUMN: { + testcase( pExpr->op==TK_AGG_COLUMN ); + testcase( pExpr->op==TK_COLUMN ); + /* Check to see if the column is in one of the tables in the FROM + ** clause of the aggregate query */ + if( ALWAYS(pSrcList!=0) ){ + struct SrcList_item *pItem = pSrcList->a; + for(i=0; inSrc; i++, pItem++){ + struct AggInfo_col *pCol; + assert( !ExprHasProperty(pExpr, EP_TokenOnly|EP_Reduced) ); + if( pExpr->iTable==pItem->iCursor ){ + /* If we reach this point, it means that pExpr refers to a table + ** that is in the FROM clause of the aggregate query. + ** + ** Make an entry for the column in pAggInfo->aCol[] if there + ** is not an entry there already. + */ + int k; + pCol = pAggInfo->aCol; + for(k=0; knColumn; k++, pCol++){ + if( pCol->iTable==pExpr->iTable && + pCol->iColumn==pExpr->iColumn ){ + break; + } + } + if( (k>=pAggInfo->nColumn) + && (k = addAggInfoColumn(pParse->db, pAggInfo))>=0 + ){ + pCol = &pAggInfo->aCol[k]; + pCol->pTab = pExpr->pTab; + pCol->iTable = pExpr->iTable; + pCol->iColumn = pExpr->iColumn; + pCol->iMem = ++pParse->nMem; + pCol->iSorterColumn = -1; + pCol->pExpr = pExpr; + if( pAggInfo->pGroupBy ){ + int j, n; + ExprList *pGB = pAggInfo->pGroupBy; + struct ExprList_item *pTerm = pGB->a; + n = pGB->nExpr; + for(j=0; jpExpr; + if( pE->op==TK_COLUMN && pE->iTable==pExpr->iTable && + pE->iColumn==pExpr->iColumn ){ + pCol->iSorterColumn = j; + break; + } + } + } + if( pCol->iSorterColumn<0 ){ + pCol->iSorterColumn = pAggInfo->nSortingColumn++; + } + } + /* There is now an entry for pExpr in pAggInfo->aCol[] (either + ** because it was there before or because we just created it). + ** Convert the pExpr to be a TK_AGG_COLUMN referring to that + ** pAggInfo->aCol[] entry. + */ + ExprSetVVAProperty(pExpr, EP_NoReduce); + pExpr->pAggInfo = pAggInfo; + pExpr->op = TK_AGG_COLUMN; + pExpr->iAgg = (i16)k; + break; + } /* endif pExpr->iTable==pItem->iCursor */ + } /* end loop over pSrcList */ } - if( is_agg ) pNC->allowAgg = 0; - sqlite3WalkExprList(pWalker, pList); - if( is_agg ) pNC->allowAgg = 1; - /* FIX ME: Compute pExpr->affinity based on the expected return - ** type of the function - */ return WRC_Prune; } -#ifndef SQLITE_OMIT_SUBQUERY - case TK_SELECT: - case TK_EXISTS: testcase( pExpr->op==TK_EXISTS ); -#endif - case TK_IN: { - testcase( pExpr->op==TK_IN ); - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - int nRef = pNC->nRef; -#ifndef SQLITE_OMIT_CHECK - if( pNC->isCheck ){ - sqlite3ErrorMsg(pParse,"subqueries prohibited in CHECK constraints"); + case TK_AGG_FUNCTION: { + if( (pNC->ncFlags & NC_InAggFunc)==0 + && pWalker->walkerDepth==pExpr->op2 + ){ + /* Check to see if pExpr is a duplicate of another aggregate + ** function that is already in the pAggInfo structure + */ + struct AggInfo_func *pItem = pAggInfo->aFunc; + for(i=0; inFunc; i++, pItem++){ + if( sqlite3ExprCompare(pItem->pExpr, pExpr, -1)==0 ){ + break; + } } -#endif - sqlite3WalkSelect(pWalker, pExpr->x.pSelect); - assert( pNC->nRef>=nRef ); - if( nRef!=pNC->nRef ){ - ExprSetProperty(pExpr, EP_VarSelect); + if( i>=pAggInfo->nFunc ){ + /* pExpr is original. Make a new entry in pAggInfo->aFunc[] + */ + u8 enc = ENC(pParse->db); + i = addAggInfoFunc(pParse->db, pAggInfo); + if( i>=0 ){ + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + pItem = &pAggInfo->aFunc[i]; + pItem->pExpr = pExpr; + pItem->iMem = ++pParse->nMem; + assert( !ExprHasProperty(pExpr, EP_IntValue) ); + pItem->pFunc = sqlite3FindFunction(pParse->db, + pExpr->u.zToken, sqlite3Strlen30(pExpr->u.zToken), + pExpr->x.pList ? pExpr->x.pList->nExpr : 0, enc, 0); + if( pExpr->flags & EP_Distinct ){ + pItem->iDistinct = pParse->nTab++; + }else{ + pItem->iDistinct = -1; + } + } } + /* Make pExpr point to the appropriate pAggInfo->aFunc[] entry + */ + assert( !ExprHasProperty(pExpr, EP_TokenOnly|EP_Reduced) ); + ExprSetVVAProperty(pExpr, EP_NoReduce); + pExpr->iAgg = (i16)i; + pExpr->pAggInfo = pAggInfo; + return WRC_Prune; + }else{ + return WRC_Continue; } - break; - } -#ifndef SQLITE_OMIT_CHECK - case TK_VARIABLE: { - if( pNC->isCheck ){ - sqlite3ErrorMsg(pParse,"parameters prohibited in CHECK constraints"); - } - break; } -#endif } - return (pParse->nErr || pParse->db->mallocFailed) ? WRC_Abort : WRC_Continue; + return WRC_Continue; +} +static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){ + UNUSED_PARAMETER(pWalker); + UNUSED_PARAMETER(pSelect); + return WRC_Continue; } /* -** pEList is a list of expressions which are really the result set of the -** a SELECT statement. pE is a term in an ORDER BY or GROUP BY clause. -** This routine checks to see if pE is a simple identifier which corresponds -** to the AS-name of one of the terms of the expression list. If it is, -** this routine return an integer between 1 and N where N is the number of -** elements in pEList, corresponding to the matching entry. If there is -** no match, or if pE is not a simple identifier, then this routine -** return 0. +** Analyze the pExpr expression looking for aggregate functions and +** for variables that need to be added to AggInfo object that pNC->pAggInfo +** points to. Additional entries are made on the AggInfo object as +** necessary. ** -** pEList has been resolved. pE has not. +** This routine should only be called after the expression has been +** analyzed by sqlite3ResolveExprNames(). */ -static int resolveAsName( - Parse *pParse, /* Parsing context for error messages */ - ExprList *pEList, /* List of expressions to scan */ - Expr *pE /* Expression we are trying to match */ -){ - int i; /* Loop counter */ - - UNUSED_PARAMETER(pParse); +SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){ + Walker w; + memset(&w, 0, sizeof(w)); + w.xExprCallback = analyzeAggregate; + w.xSelectCallback = analyzeAggregatesInSelect; + w.u.pNC = pNC; + assert( pNC->pSrcList!=0 ); + sqlite3WalkExpr(&w, pExpr); +} - if( pE->op==TK_ID ){ - char *zCol = pE->u.zToken; - for(i=0; inExpr; i++){ - char *zAs = pEList->a[i].zName; - if( zAs!=0 && sqlite3StrICmp(zAs, zCol)==0 ){ - return i+1; - } +/* +** Call sqlite3ExprAnalyzeAggregates() for every expression in an +** expression list. Return the number of errors. +** +** If an error is found, the analysis is cut short. +*/ +SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext *pNC, ExprList *pList){ + struct ExprList_item *pItem; + int i; + if( pList ){ + for(pItem=pList->a, i=0; inExpr; i++, pItem++){ + sqlite3ExprAnalyzeAggregates(pNC, pItem->pExpr); } } - return 0; } /* -** pE is a pointer to an expression which is a single term in the -** ORDER BY of a compound SELECT. The expression has not been -** name resolved. -** -** At the point this routine is called, we already know that the -** ORDER BY term is not an integer index into the result set. That -** case is handled by the calling routine. -** -** Attempt to match pE against result set columns in the left-most -** SELECT statement. Return the index i of the matching column, -** as an indication to the caller that it should sort by the i-th column. -** The left-most column is 1. In other words, the value returned is the -** same integer value that would be used in the SQL statement to indicate -** the column. -** -** If there is no match, return 0. Return -1 if an error occurs. +** Allocate a single new register for use to hold some intermediate result. */ -static int resolveOrderByTermToExprList( - Parse *pParse, /* Parsing context for error messages */ - Select *pSelect, /* The SELECT statement with the ORDER BY clause */ - Expr *pE /* The specific ORDER BY term */ -){ - int i; /* Loop counter */ - ExprList *pEList; /* The columns of the result set */ - NameContext nc; /* Name context for resolving pE */ - sqlite3 *db; /* Database connection */ - int rc; /* Return code from subprocedures */ - u8 savedSuppErr; /* Saved value of db->suppressErr */ - - assert( sqlite3ExprIsInteger(pE, &i)==0 ); - pEList = pSelect->pEList; - - /* Resolve all names in the ORDER BY term expression - */ - memset(&nc, 0, sizeof(nc)); - nc.pParse = pParse; - nc.pSrcList = pSelect->pSrc; - nc.pEList = pEList; - nc.allowAgg = 1; - nc.nErr = 0; - db = pParse->db; - savedSuppErr = db->suppressErr; - db->suppressErr = 1; - rc = sqlite3ResolveExprNames(&nc, pE); - db->suppressErr = savedSuppErr; - if( rc ) return 0; +SQLITE_PRIVATE int sqlite3GetTempReg(Parse *pParse){ + if( pParse->nTempReg==0 ){ + return ++pParse->nMem; + } + return pParse->aTempReg[--pParse->nTempReg]; +} - /* Try to match the ORDER BY expression against an expression - ** in the result set. Return an 1-based index of the matching - ** result-set entry. - */ - for(i=0; inExpr; i++){ - if( sqlite3ExprCompare(pEList->a[i].pExpr, pE)<2 ){ - return i+1; +/* +** Deallocate a register, making available for reuse for some other +** purpose. +** +** If a register is currently being used by the column cache, then +** the deallocation is deferred until the column cache line that uses +** the register becomes stale. +*/ +SQLITE_PRIVATE void sqlite3ReleaseTempReg(Parse *pParse, int iReg){ + if( iReg && pParse->nTempRegaTempReg) ){ + int i; + struct yColCache *p; + for(i=0, p=pParse->aColCache; iiReg==iReg ){ + p->tempReg = 1; + return; + } } + pParse->aTempReg[pParse->nTempReg++] = iReg; } +} - /* If no match, return 0. */ - return 0; +/* +** Allocate or deallocate a block of nReg consecutive registers +*/ +SQLITE_PRIVATE int sqlite3GetTempRange(Parse *pParse, int nReg){ + int i, n; + i = pParse->iRangeReg; + n = pParse->nRangeReg; + if( nReg<=n ){ + assert( !usedAsColumnCache(pParse, i, i+n-1) ); + pParse->iRangeReg += nReg; + pParse->nRangeReg -= nReg; + }else{ + i = pParse->nMem+1; + pParse->nMem += nReg; + } + return i; +} +SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse *pParse, int iReg, int nReg){ + sqlite3ExprCacheRemove(pParse, iReg, nReg); + if( nReg>pParse->nRangeReg ){ + pParse->nRangeReg = nReg; + pParse->iRangeReg = iReg; + } } /* -** Generate an ORDER BY or GROUP BY term out-of-range error. +** Mark all temporary registers as being unavailable for reuse. */ -static void resolveOutOfRangeError( - Parse *pParse, /* The error context into which to write the error */ - const char *zType, /* "ORDER" or "GROUP" */ - int i, /* The index (1-based) of the term out of range */ - int mx /* Largest permissible value of i */ -){ - sqlite3ErrorMsg(pParse, - "%r %s BY term out of range - should be " - "between 1 and %d", i, zType, mx); +SQLITE_PRIVATE void sqlite3ClearTempRegCache(Parse *pParse){ + pParse->nTempReg = 0; + pParse->nRangeReg = 0; } +/************** End of expr.c ************************************************/ +/************** Begin file alter.c *******************************************/ /* -** Analyze the ORDER BY clause in a compound SELECT statement. Modify -** each term of the ORDER BY clause is a constant integer between 1 -** and N where N is the number of columns in the compound SELECT. +** 2005 February 15 ** -** ORDER BY terms that are already an integer between 1 and N are -** unmodified. ORDER BY terms that are integers outside the range of -** 1 through N generate an error. ORDER BY terms that are expressions -** are matched against result set expressions of compound SELECT -** beginning with the left-most SELECT and working toward the right. -** At the first match, the ORDER BY expression is transformed into -** the integer column number. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** Return the number of errors seen. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains C code routines that used to generate VDBE code +** that implements the ALTER TABLE command. */ -static int resolveCompoundOrderBy( - Parse *pParse, /* Parsing context. Leave error messages here */ - Select *pSelect /* The SELECT statement containing the ORDER BY */ -){ - int i; - ExprList *pOrderBy; - ExprList *pEList; - sqlite3 *db; - int moreToDo = 1; - pOrderBy = pSelect->pOrderBy; - if( pOrderBy==0 ) return 0; - db = pParse->db; -#if SQLITE_MAX_COLUMN - if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many terms in ORDER BY clause"); - return 1; - } -#endif - for(i=0; inExpr; i++){ - pOrderBy->a[i].done = 0; - } - pSelect->pNext = 0; - while( pSelect->pPrior ){ - pSelect->pPrior->pNext = pSelect; - pSelect = pSelect->pPrior; - } - while( pSelect && moreToDo ){ - struct ExprList_item *pItem; - moreToDo = 0; - pEList = pSelect->pEList; - assert( pEList!=0 ); - for(i=0, pItem=pOrderBy->a; inExpr; i++, pItem++){ - int iCol = -1; - Expr *pE, *pDup; - if( pItem->done ) continue; - pE = pItem->pExpr; - if( sqlite3ExprIsInteger(pE, &iCol) ){ - if( iCol<=0 || iCol>pEList->nExpr ){ - resolveOutOfRangeError(pParse, "ORDER", i+1, pEList->nExpr); - return 1; - } - }else{ - iCol = resolveAsName(pParse, pEList, pE); - if( iCol==0 ){ - pDup = sqlite3ExprDup(db, pE, 0); - if( !db->mallocFailed ){ - assert(pDup); - iCol = resolveOrderByTermToExprList(pParse, pSelect, pDup); - } - sqlite3ExprDelete(db, pDup); - } - } - if( iCol>0 ){ - CollSeq *pColl = pE->pColl; - int flags = pE->flags & EP_ExpCollate; - sqlite3ExprDelete(db, pE); - pItem->pExpr = pE = sqlite3Expr(db, TK_INTEGER, 0); - if( pE==0 ) return 1; - pE->pColl = pColl; - pE->flags |= EP_IntValue | flags; - pE->u.iValue = iCol; - pItem->iCol = (u16)iCol; - pItem->done = 1; - }else{ - moreToDo = 1; - } - } - pSelect = pSelect->pNext; - } - for(i=0; inExpr; i++){ - if( pOrderBy->a[i].done==0 ){ - sqlite3ErrorMsg(pParse, "%r ORDER BY term does not match any " - "column in the result set", i+1); - return 1; - } - } - return 0; -} +/* +** The code in this file only exists if we are not omitting the +** ALTER TABLE logic from the build. +*/ +#ifndef SQLITE_OMIT_ALTERTABLE + /* -** Check every term in the ORDER BY or GROUP BY clause pOrderBy of -** the SELECT statement pSelect. If any term is reference to a -** result set expression (as determined by the ExprList.a.iCol field) -** then convert that term into a copy of the corresponding result set -** column. +** This function is used by SQL generated to implement the +** ALTER TABLE command. The first argument is the text of a CREATE TABLE or +** CREATE INDEX command. The second is a table name. The table name in +** the CREATE TABLE or CREATE INDEX statement is replaced with the third +** argument and the result returned. Examples: ** -** If any errors are detected, add an error message to pParse and -** return non-zero. Return zero if no errors are seen. +** sqlite_rename_table('CREATE TABLE abc(a, b, c)', 'def') +** -> 'CREATE TABLE def(a, b, c)' +** +** sqlite_rename_table('CREATE INDEX i ON abc(a)', 'def') +** -> 'CREATE INDEX i ON def(a, b, c)' */ -SQLITE_PRIVATE int sqlite3ResolveOrderGroupBy( - Parse *pParse, /* Parsing context. Leave error messages here */ - Select *pSelect, /* The SELECT statement containing the clause */ - ExprList *pOrderBy, /* The ORDER BY or GROUP BY clause to be processed */ - const char *zType /* "ORDER" or "GROUP" */ +static void renameTableFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv ){ - int i; - sqlite3 *db = pParse->db; - ExprList *pEList; - struct ExprList_item *pItem; + unsigned char const *zSql = sqlite3_value_text(argv[0]); + unsigned char const *zTableName = sqlite3_value_text(argv[1]); - if( pOrderBy==0 || pParse->db->mallocFailed ) return 0; -#if SQLITE_MAX_COLUMN - if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many terms in %s BY clause", zType); - return 1; - } -#endif - pEList = pSelect->pEList; - assert( pEList!=0 ); /* sqlite3SelectNew() guarantees this */ - for(i=0, pItem=pOrderBy->a; inExpr; i++, pItem++){ - if( pItem->iCol ){ - if( pItem->iCol>pEList->nExpr ){ - resolveOutOfRangeError(pParse, zType, i+1, pEList->nExpr); - return 1; + int token; + Token tname; + unsigned char const *zCsr = zSql; + int len = 0; + char *zRet; + + sqlite3 *db = sqlite3_context_db_handle(context); + + UNUSED_PARAMETER(NotUsed); + + /* The principle used to locate the table name in the CREATE TABLE + ** statement is that the table name is the first non-space token that + ** is immediately followed by a TK_LP or TK_USING token. + */ + if( zSql ){ + do { + if( !*zCsr ){ + /* Ran out of input before finding an opening bracket. Return NULL. */ + return; } - resolveAlias(pParse, pEList, pItem->iCol-1, pItem->pExpr, zType); - } + + /* Store the token that zCsr points to in tname. */ + tname.z = (char*)zCsr; + tname.n = len; + + /* Advance zCsr to the next token. Store that token type in 'token', + ** and its length in 'len' (to be used next iteration of this loop). + */ + do { + zCsr += len; + len = sqlite3GetToken(zCsr, &token); + } while( token==TK_SPACE ); + assert( len>0 ); + } while( token!=TK_LP && token!=TK_USING ); + + zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", (int)(((u8*)tname.z) - zSql), + zSql, zTableName, tname.z+tname.n); + sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); } - return 0; } /* -** pOrderBy is an ORDER BY or GROUP BY clause in SELECT statement pSelect. -** The Name context of the SELECT statement is pNC. zType is either -** "ORDER" or "GROUP" depending on which type of clause pOrderBy is. +** This C function implements an SQL user function that is used by SQL code +** generated by the ALTER TABLE ... RENAME command to modify the definition +** of any foreign key constraints that use the table being renamed as the +** parent table. It is passed three arguments: ** -** This routine resolves each term of the clause into an expression. -** If the order-by term is an integer I between 1 and N (where N is the -** number of columns in the result set of the SELECT) then the expression -** in the resolution is a copy of the I-th result-set expression. If -** the order-by term is an identify that corresponds to the AS-name of -** a result-set expression, then the term resolves to a copy of the -** result-set expression. Otherwise, the expression is resolved in -** the usual way - using sqlite3ResolveExprNames(). +** 1) The complete text of the CREATE TABLE statement being modified, +** 2) The old name of the table being renamed, and +** 3) The new name of the table being renamed. ** -** This routine returns the number of errors. If errors occur, then -** an appropriate error message might be left in pParse. (OOM errors -** excepted.) +** It returns the new CREATE TABLE statement. For example: +** +** sqlite_rename_parent('CREATE TABLE t1(a REFERENCES t2)', 't2', 't3') +** -> 'CREATE TABLE t1(a REFERENCES t3)' */ -static int resolveOrderGroupBy( - NameContext *pNC, /* The name context of the SELECT statement */ - Select *pSelect, /* The SELECT statement holding pOrderBy */ - ExprList *pOrderBy, /* An ORDER BY or GROUP BY clause to resolve */ - const char *zType /* Either "ORDER" or "GROUP", as appropriate */ +#ifndef SQLITE_OMIT_FOREIGN_KEY +static void renameParentFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv ){ - int i; /* Loop counter */ - int iCol; /* Column number */ - struct ExprList_item *pItem; /* A term of the ORDER BY clause */ - Parse *pParse; /* Parsing context */ - int nResult; /* Number of terms in the result set */ + sqlite3 *db = sqlite3_context_db_handle(context); + char *zOutput = 0; + char *zResult; + unsigned char const *zInput = sqlite3_value_text(argv[0]); + unsigned char const *zOld = sqlite3_value_text(argv[1]); + unsigned char const *zNew = sqlite3_value_text(argv[2]); - if( pOrderBy==0 ) return 0; - nResult = pSelect->pEList->nExpr; - pParse = pNC->pParse; - for(i=0, pItem=pOrderBy->a; inExpr; i++, pItem++){ - Expr *pE = pItem->pExpr; - iCol = resolveAsName(pParse, pSelect->pEList, pE); - if( iCol>0 ){ - /* If an AS-name match is found, mark this ORDER BY column as being - ** a copy of the iCol-th result-set column. The subsequent call to - ** sqlite3ResolveOrderGroupBy() will convert the expression to a - ** copy of the iCol-th result-set expression. */ - pItem->iCol = (u16)iCol; - continue; - } - if( sqlite3ExprIsInteger(pE, &iCol) ){ - /* The ORDER BY term is an integer constant. Again, set the column - ** number so that sqlite3ResolveOrderGroupBy() will convert the - ** order-by term to a copy of the result-set expression */ - if( iCol<1 ){ - resolveOutOfRangeError(pParse, zType, i+1, nResult); - return 1; - } - pItem->iCol = (u16)iCol; - continue; - } + unsigned const char *z; /* Pointer to token */ + int n; /* Length of token z */ + int token; /* Type of token */ - /* Otherwise, treat the ORDER BY term as an ordinary expression */ - pItem->iCol = 0; - if( sqlite3ResolveExprNames(pNC, pE) ){ - return 1; + UNUSED_PARAMETER(NotUsed); + if( zInput==0 || zOld==0 ) return; + for(z=zInput; *z; z=z+n){ + n = sqlite3GetToken(z, &token); + if( token==TK_REFERENCES ){ + char *zParent; + do { + z += n; + n = sqlite3GetToken(z, &token); + }while( token==TK_SPACE ); + + zParent = sqlite3DbStrNDup(db, (const char *)z, n); + if( zParent==0 ) break; + sqlite3Dequote(zParent); + if( 0==sqlite3StrICmp((const char *)zOld, zParent) ){ + char *zOut = sqlite3MPrintf(db, "%s%.*s\"%w\"", + (zOutput?zOutput:""), (int)(z-zInput), zInput, (const char *)zNew + ); + sqlite3DbFree(db, zOutput); + zOutput = zOut; + zInput = &z[n]; + } + sqlite3DbFree(db, zParent); } } - return sqlite3ResolveOrderGroupBy(pParse, pSelect, pOrderBy, zType); + + zResult = sqlite3MPrintf(db, "%s%s", (zOutput?zOutput:""), zInput), + sqlite3_result_text(context, zResult, -1, SQLITE_DYNAMIC); + sqlite3DbFree(db, zOutput); } +#endif -/* -** Resolve names in the SELECT statement p and all of its descendents. +#ifndef SQLITE_OMIT_TRIGGER +/* This function is used by SQL generated to implement the +** ALTER TABLE command. The first argument is the text of a CREATE TRIGGER +** statement. The second is a table name. The table name in the CREATE +** TRIGGER statement is replaced with the third argument and the result +** returned. This is analagous to renameTableFunc() above, except for CREATE +** TRIGGER, not CREATE INDEX and CREATE TABLE. */ -static int resolveSelectStep(Walker *pWalker, Select *p){ - NameContext *pOuterNC; /* Context that contains this SELECT */ - NameContext sNC; /* Name context of this SELECT */ - int isCompound; /* True if p is a compound select */ - int nCompound; /* Number of compound terms processed so far */ - Parse *pParse; /* Parsing context */ - ExprList *pEList; /* Result set expression list */ - int i; /* Loop counter */ - ExprList *pGroupBy; /* The GROUP BY clause */ - Select *pLeftmost; /* Left-most of SELECT of a compound */ - sqlite3 *db; /* Database connection */ - - - assert( p!=0 ); - if( p->selFlags & SF_Resolved ){ - return WRC_Prune; - } - pOuterNC = pWalker->u.pNC; - pParse = pWalker->pParse; - db = pParse->db; - - /* Normally sqlite3SelectExpand() will be called first and will have - ** already expanded this SELECT. However, if this is a subquery within - ** an expression, sqlite3ResolveExprNames() will be called without a - ** prior call to sqlite3SelectExpand(). When that happens, let - ** sqlite3SelectPrep() do all of the processing for this SELECT. - ** sqlite3SelectPrep() will invoke both sqlite3SelectExpand() and - ** this routine in the correct order. - */ - if( (p->selFlags & SF_Expanded)==0 ){ - sqlite3SelectPrep(pParse, p, pOuterNC); - return (pParse->nErr || db->mallocFailed) ? WRC_Abort : WRC_Prune; - } - - isCompound = p->pPrior!=0; - nCompound = 0; - pLeftmost = p; - while( p ){ - assert( (p->selFlags & SF_Expanded)!=0 ); - assert( (p->selFlags & SF_Resolved)==0 ); - p->selFlags |= SF_Resolved; +static void renameTriggerFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + unsigned char const *zSql = sqlite3_value_text(argv[0]); + unsigned char const *zTableName = sqlite3_value_text(argv[1]); - /* Resolve the expressions in the LIMIT and OFFSET clauses. These - ** are not allowed to refer to any names, so pass an empty NameContext. - */ - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pParse; - if( sqlite3ResolveExprNames(&sNC, p->pLimit) || - sqlite3ResolveExprNames(&sNC, p->pOffset) ){ - return WRC_Abort; - } - - /* Set up the local name-context to pass to sqlite3ResolveExprNames() to - ** resolve the result-set expression list. - */ - sNC.allowAgg = 1; - sNC.pSrcList = p->pSrc; - sNC.pNext = pOuterNC; - - /* Resolve names in the result set. */ - pEList = p->pEList; - assert( pEList!=0 ); - for(i=0; inExpr; i++){ - Expr *pX = pEList->a[i].pExpr; - if( sqlite3ResolveExprNames(&sNC, pX) ){ - return WRC_Abort; - } - } - - /* Recursively resolve names in all subqueries - */ - for(i=0; ipSrc->nSrc; i++){ - struct SrcList_item *pItem = &p->pSrc->a[i]; - if( pItem->pSelect ){ - const char *zSavedContext = pParse->zAuthContext; - if( pItem->zName ) pParse->zAuthContext = pItem->zName; - sqlite3ResolveSelectNames(pParse, pItem->pSelect, pOuterNC); - pParse->zAuthContext = zSavedContext; - if( pParse->nErr || db->mallocFailed ) return WRC_Abort; - } - } - - /* If there are no aggregate functions in the result-set, and no GROUP BY - ** expression, do not allow aggregates in any of the other expressions. - */ - assert( (p->selFlags & SF_Aggregate)==0 ); - pGroupBy = p->pGroupBy; - if( pGroupBy || sNC.hasAgg ){ - p->selFlags |= SF_Aggregate; - }else{ - sNC.allowAgg = 0; - } - - /* If a HAVING clause is present, then there must be a GROUP BY clause. - */ - if( p->pHaving && !pGroupBy ){ - sqlite3ErrorMsg(pParse, "a GROUP BY clause is required before HAVING"); - return WRC_Abort; - } - - /* Add the expression list to the name-context before parsing the - ** other expressions in the SELECT statement. This is so that - ** expressions in the WHERE clause (etc.) can refer to expressions by - ** aliases in the result set. - ** - ** Minor point: If this is the case, then the expression will be - ** re-evaluated for each reference to it. - */ - sNC.pEList = p->pEList; - if( sqlite3ResolveExprNames(&sNC, p->pWhere) || - sqlite3ResolveExprNames(&sNC, p->pHaving) - ){ - return WRC_Abort; - } + int token; + Token tname; + int dist = 3; + unsigned char const *zCsr = zSql; + int len = 0; + char *zRet; + sqlite3 *db = sqlite3_context_db_handle(context); - /* The ORDER BY and GROUP BY clauses may not refer to terms in - ** outer queries - */ - sNC.pNext = 0; - sNC.allowAgg = 1; + UNUSED_PARAMETER(NotUsed); - /* Process the ORDER BY clause for singleton SELECT statements. - ** The ORDER BY clause for compounds SELECT statements is handled - ** below, after all of the result-sets for all of the elements of - ** the compound have been resolved. - */ - if( !isCompound && resolveOrderGroupBy(&sNC, p, p->pOrderBy, "ORDER") ){ - return WRC_Abort; - } - if( db->mallocFailed ){ - return WRC_Abort; - } - - /* Resolve the GROUP BY clause. At the same time, make sure - ** the GROUP BY clause does not contain aggregate functions. - */ - if( pGroupBy ){ - struct ExprList_item *pItem; - - if( resolveOrderGroupBy(&sNC, p, pGroupBy, "GROUP") || db->mallocFailed ){ - return WRC_Abort; + /* The principle used to locate the table name in the CREATE TRIGGER + ** statement is that the table name is the first token that is immediately + ** preceded by either TK_ON or TK_DOT and immediately followed by one + ** of TK_WHEN, TK_BEGIN or TK_FOR. + */ + if( zSql ){ + do { + + if( !*zCsr ){ + /* Ran out of input before finding the table name. Return NULL. */ + return; } - for(i=0, pItem=pGroupBy->a; inExpr; i++, pItem++){ - if( ExprHasProperty(pItem->pExpr, EP_Agg) ){ - sqlite3ErrorMsg(pParse, "aggregate functions are not allowed in " - "the GROUP BY clause"); - return WRC_Abort; - } + + /* Store the token that zCsr points to in tname. */ + tname.z = (char*)zCsr; + tname.n = len; + + /* Advance zCsr to the next token. Store that token type in 'token', + ** and its length in 'len' (to be used next iteration of this loop). + */ + do { + zCsr += len; + len = sqlite3GetToken(zCsr, &token); + }while( token==TK_SPACE ); + assert( len>0 ); + + /* Variable 'dist' stores the number of tokens read since the most + ** recent TK_DOT or TK_ON. This means that when a WHEN, FOR or BEGIN + ** token is read and 'dist' equals 2, the condition stated above + ** to be met. + ** + ** Note that ON cannot be a database, table or column name, so + ** there is no need to worry about syntax like + ** "CREATE TRIGGER ... ON ON.ON BEGIN ..." etc. + */ + dist++; + if( token==TK_DOT || token==TK_ON ){ + dist = 0; } - } + } while( dist!=2 || (token!=TK_WHEN && token!=TK_FOR && token!=TK_BEGIN) ); - /* Advance to the next term of the compound + /* Variable tname now contains the token that is the old table-name + ** in the CREATE TRIGGER statement. */ - p = p->pPrior; - nCompound++; + zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", (int)(((u8*)tname.z) - zSql), + zSql, zTableName, tname.z+tname.n); + sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); } +} +#endif /* !SQLITE_OMIT_TRIGGER */ - /* Resolve the ORDER BY on a compound SELECT after all terms of - ** the compound have been resolved. - */ - if( isCompound && resolveCompoundOrderBy(pParse, pLeftmost) ){ - return WRC_Abort; - } +/* +** Register built-in functions used to help implement ALTER TABLE +*/ +SQLITE_PRIVATE void sqlite3AlterFunctions(void){ + static SQLITE_WSD FuncDef aAlterTableFuncs[] = { + FUNCTION(sqlite_rename_table, 2, 0, 0, renameTableFunc), +#ifndef SQLITE_OMIT_TRIGGER + FUNCTION(sqlite_rename_trigger, 2, 0, 0, renameTriggerFunc), +#endif +#ifndef SQLITE_OMIT_FOREIGN_KEY + FUNCTION(sqlite_rename_parent, 3, 0, 0, renameParentFunc), +#endif + }; + int i; + FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); + FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aAlterTableFuncs); - return WRC_Prune; + for(i=0; i OR name= OR ... ** -** Function calls are checked to make sure that the function is -** defined and that the correct number of arguments are specified. -** If the function is an aggregate function, then the pNC->hasAgg is -** set and the opcode is changed from TK_FUNCTION to TK_AGG_FUNCTION. -** If an expression contains aggregate functions then the EP_Agg -** property on the expression is set. +** If argument zWhere is NULL, then a pointer string containing the text +** "name=" is returned, where is the quoted version +** of the string passed as argument zConstant. The returned buffer is +** allocated using sqlite3DbMalloc(). It is the responsibility of the +** caller to ensure that it is eventually freed. ** -** An error message is left in pParse if anything is amiss. The number -** if errors is returned. +** If argument zWhere is not NULL, then the string returned is +** " OR name=", where is the contents of zWhere. +** In this case zWhere is passed to sqlite3DbFree() before returning. +** */ -SQLITE_PRIVATE int sqlite3ResolveExprNames( - NameContext *pNC, /* Namespace to resolve expressions in. */ - Expr *pExpr /* The expression to be analyzed. */ -){ - int savedHasAgg; - Walker w; +static char *whereOrName(sqlite3 *db, char *zWhere, char *zConstant){ + char *zNew; + if( !zWhere ){ + zNew = sqlite3MPrintf(db, "name=%Q", zConstant); + }else{ + zNew = sqlite3MPrintf(db, "%s OR name=%Q", zWhere, zConstant); + sqlite3DbFree(db, zWhere); + } + return zNew; +} - if( pExpr==0 ) return 0; -#if SQLITE_MAX_EXPR_DEPTH>0 - { - Parse *pParse = pNC->pParse; - if( sqlite3ExprCheckHeight(pParse, pExpr->nHeight+pNC->pParse->nHeight) ){ - return 1; - } - pParse->nHeight += pExpr->nHeight; +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) +/* +** Generate the text of a WHERE expression which can be used to select all +** tables that have foreign key constraints that refer to table pTab (i.e. +** constraints for which pTab is the parent table) from the sqlite_master +** table. +*/ +static char *whereForeignKeys(Parse *pParse, Table *pTab){ + FKey *p; + char *zWhere = 0; + for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ + zWhere = whereOrName(pParse->db, zWhere, p->pFrom->zName); } + return zWhere; +} #endif - savedHasAgg = pNC->hasAgg; - pNC->hasAgg = 0; - w.xExprCallback = resolveExprStep; - w.xSelectCallback = resolveSelectStep; - w.pParse = pNC->pParse; - w.u.pNC = pNC; - sqlite3WalkExpr(&w, pExpr); -#if SQLITE_MAX_EXPR_DEPTH>0 - pNC->pParse->nHeight -= pExpr->nHeight; -#endif - if( pNC->nErr>0 || w.pParse->nErr>0 ){ - ExprSetProperty(pExpr, EP_Error); + +/* +** Generate the text of a WHERE expression which can be used to select all +** temporary triggers on table pTab from the sqlite_temp_master table. If +** table pTab has no temporary triggers, or is itself stored in the +** temporary database, NULL is returned. +*/ +static char *whereTempTriggers(Parse *pParse, Table *pTab){ + Trigger *pTrig; + char *zWhere = 0; + const Schema *pTempSchema = pParse->db->aDb[1].pSchema; /* Temp db schema */ + + /* If the table is not located in the temp-db (in which case NULL is + ** returned, loop through the tables list of triggers. For each trigger + ** that is not part of the temp-db schema, add a clause to the WHERE + ** expression being built up in zWhere. + */ + if( pTab->pSchema!=pTempSchema ){ + sqlite3 *db = pParse->db; + for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ + if( pTrig->pSchema==pTempSchema ){ + zWhere = whereOrName(db, zWhere, pTrig->zName); + } + } } - if( pNC->hasAgg ){ - ExprSetProperty(pExpr, EP_Agg); - }else if( savedHasAgg ){ - pNC->hasAgg = 1; + if( zWhere ){ + char *zNew = sqlite3MPrintf(pParse->db, "type='trigger' AND (%s)", zWhere); + sqlite3DbFree(pParse->db, zWhere); + zWhere = zNew; } - return ExprHasProperty(pExpr, EP_Error); + return zWhere; } - /* -** Resolve all names in all expressions of a SELECT and in all -** decendents of the SELECT, including compounds off of p->pPrior, -** subqueries in expressions, and subqueries used as FROM clause -** terms. -** -** See sqlite3ResolveExprNames() for a description of the kinds of -** transformations that occur. -** -** All SELECT statements should have been expanded using -** sqlite3SelectExpand() prior to invoking this routine. +** Generate code to drop and reload the internal representation of table +** pTab from the database, including triggers and temporary triggers. +** Argument zName is the name of the table in the database schema at +** the time the generated code is executed. This can be different from +** pTab->zName if this function is being called to code part of an +** "ALTER TABLE RENAME TO" statement. */ -SQLITE_PRIVATE void sqlite3ResolveSelectNames( - Parse *pParse, /* The parser context */ - Select *p, /* The SELECT statement being coded. */ - NameContext *pOuterNC /* Name context for parent SELECT statement */ -){ - Walker w; +static void reloadTableSchema(Parse *pParse, Table *pTab, const char *zName){ + Vdbe *v; + char *zWhere; + int iDb; /* Index of database containing pTab */ +#ifndef SQLITE_OMIT_TRIGGER + Trigger *pTrig; +#endif - assert( p!=0 ); - w.xExprCallback = resolveExprStep; - w.xSelectCallback = resolveSelectStep; - w.pParse = pParse; - w.u.pNC = pOuterNC; - sqlite3WalkSelect(&w, p); + v = sqlite3GetVdbe(pParse); + if( NEVER(v==0) ) return; + assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); + iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + assert( iDb>=0 ); + +#ifndef SQLITE_OMIT_TRIGGER + /* Drop any table triggers from the internal schema. */ + for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ + int iTrigDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema); + assert( iTrigDb==iDb || iTrigDb==1 ); + sqlite3VdbeAddOp4(v, OP_DropTrigger, iTrigDb, 0, 0, pTrig->zName, 0); + } +#endif + + /* Drop the table and index from the internal schema. */ + sqlite3VdbeAddOp4(v, OP_DropTable, iDb, 0, 0, pTab->zName, 0); + + /* Reload the table, index and permanent trigger schemas. */ + zWhere = sqlite3MPrintf(pParse->db, "tbl_name=%Q", zName); + if( !zWhere ) return; + sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere); + +#ifndef SQLITE_OMIT_TRIGGER + /* Now, if the table is not stored in the temp database, reload any temp + ** triggers. Don't use IN(...) in case SQLITE_OMIT_SUBQUERY is defined. + */ + if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ + sqlite3VdbeAddParseSchemaOp(v, 1, zWhere); + } +#endif } -/************** End of resolve.c *********************************************/ -/************** Begin file expr.c ********************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Parameter zName is the name of a table that is about to be altered +** (either with ALTER TABLE ... RENAME TO or ALTER TABLE ... ADD COLUMN). +** If the table is a system table, this function leaves an error message +** in pParse->zErr (system tables may not be altered) and returns non-zero. ** -************************************************************************* -** This file contains routines used for analyzing expressions and -** for generating VDBE code that evaluates expressions in SQLite. +** Or, if zName is not a system table, zero is returned. */ +static int isSystemTable(Parse *pParse, const char *zName){ + if( sqlite3Strlen30(zName)>6 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ + sqlite3ErrorMsg(pParse, "table %s may not be altered", zName); + return 1; + } + return 0; +} /* -** Return the 'affinity' of the expression pExpr if any. -** -** If pExpr is a column, a reference to a column via an 'AS' alias, -** or a sub-select with a column as the return value, then the -** affinity of that column is returned. Otherwise, 0x00 is returned, -** indicating no affinity for the expression. -** -** i.e. the WHERE clause expresssions in the following statements all -** have an affinity: -** -** CREATE TABLE t1(a); -** SELECT * FROM t1 WHERE a; -** SELECT a AS b FROM t1 WHERE b; -** SELECT * FROM t1 WHERE (select a from t1); +** Generate code to implement the "ALTER TABLE xxx RENAME TO yyy" +** command. */ -SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr){ - int op = pExpr->op; - if( op==TK_SELECT ){ - assert( pExpr->flags&EP_xIsSelect ); - return sqlite3ExprAffinity(pExpr->x.pSelect->pEList->a[0].pExpr); +SQLITE_PRIVATE void sqlite3AlterRenameTable( + Parse *pParse, /* Parser context. */ + SrcList *pSrc, /* The table to rename. */ + Token *pName /* The new table name. */ +){ + int iDb; /* Database that contains the table */ + char *zDb; /* Name of database iDb */ + Table *pTab; /* Table being renamed */ + char *zName = 0; /* NULL-terminated version of pName */ + sqlite3 *db = pParse->db; /* Database connection */ + int nTabName; /* Number of UTF-8 characters in zTabName */ + const char *zTabName; /* Original name of the table */ + Vdbe *v; +#ifndef SQLITE_OMIT_TRIGGER + char *zWhere = 0; /* Where clause to locate temp triggers */ +#endif + VTable *pVTab = 0; /* Non-zero if this is a v-tab with an xRename() */ + int savedDbFlags; /* Saved value of db->flags */ + + savedDbFlags = db->flags; + if( NEVER(db->mallocFailed) ) goto exit_rename_table; + assert( pSrc->nSrc==1 ); + assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); + + pTab = sqlite3LocateTableItem(pParse, 0, &pSrc->a[0]); + if( !pTab ) goto exit_rename_table; + iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + zDb = db->aDb[iDb].zName; + db->flags |= SQLITE_PreferBuiltin; + + /* Get a NULL terminated version of the new table name. */ + zName = sqlite3NameFromToken(db, pName); + if( !zName ) goto exit_rename_table; + + /* Check that a table or index named 'zName' does not already exist + ** in database iDb. If so, this is an error. + */ + if( sqlite3FindTable(db, zName, zDb) || sqlite3FindIndex(db, zName, zDb) ){ + sqlite3ErrorMsg(pParse, + "there is already another table or index with this name: %s", zName); + goto exit_rename_table; } -#ifndef SQLITE_OMIT_CAST - if( op==TK_CAST ){ - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - return sqlite3AffinityType(pExpr->u.zToken); + + /* Make sure it is not a system table being altered, or a reserved name + ** that the table is being renamed to. + */ + if( SQLITE_OK!=isSystemTable(pParse, pTab->zName) ){ + goto exit_rename_table; + } + if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ goto + exit_rename_table; + } + +#ifndef SQLITE_OMIT_VIEW + if( pTab->pSelect ){ + sqlite3ErrorMsg(pParse, "view %s may not be altered", pTab->zName); + goto exit_rename_table; } #endif - if( (op==TK_AGG_COLUMN || op==TK_COLUMN || op==TK_REGISTER) - && pExpr->pTab!=0 - ){ - /* op==TK_REGISTER && pExpr->pTab!=0 happens when pExpr was originally - ** a TK_COLUMN but was previously evaluated and cached in a register */ - int j = pExpr->iColumn; - if( j<0 ) return SQLITE_AFF_INTEGER; - assert( pExpr->pTab && jpTab->nCol ); - return pExpr->pTab->aCol[j].affinity; + +#ifndef SQLITE_OMIT_AUTHORIZATION + /* Invoke the authorization callback. */ + if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){ + goto exit_rename_table; } - return pExpr->affinity; -} +#endif -/* -** Set the explicit collating sequence for an expression to the -** collating sequence supplied in the second argument. -*/ -SQLITE_PRIVATE Expr *sqlite3ExprSetColl(Expr *pExpr, CollSeq *pColl){ - if( pExpr && pColl ){ - pExpr->pColl = pColl; - pExpr->flags |= EP_ExpCollate; +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ + goto exit_rename_table; } - return pExpr; -} + if( IsVirtual(pTab) ){ + pVTab = sqlite3GetVTable(db, pTab); + if( pVTab->pVtab->pModule->xRename==0 ){ + pVTab = 0; + } + } +#endif + + /* Begin a transaction for database iDb. + ** Then modify the schema cookie (since the ALTER TABLE modifies the + ** schema). Open a statement transaction if the table is a virtual + ** table. + */ + v = sqlite3GetVdbe(pParse); + if( v==0 ){ + goto exit_rename_table; + } + sqlite3BeginWriteOperation(pParse, pVTab!=0, iDb); + sqlite3ChangeCookie(pParse, iDb); + + /* If this is a virtual table, invoke the xRename() function if + ** one is defined. The xRename() callback will modify the names + ** of any resources used by the v-table implementation (including other + ** SQLite tables) that are identified by the name of the virtual table. + */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pVTab ){ + int i = ++pParse->nMem; + sqlite3VdbeAddOp4(v, OP_String8, 0, i, 0, zName, 0); + sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB); + sqlite3MayAbort(pParse); + } +#endif + + /* figure out how many UTF-8 characters are in zName */ + zTabName = pTab->zName; + nTabName = sqlite3Utf8CharLen(zTabName, -1); + +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + if( db->flags&SQLITE_ForeignKeys ){ + /* If foreign-key support is enabled, rewrite the CREATE TABLE + ** statements corresponding to all child tables of foreign key constraints + ** for which the renamed table is the parent table. */ + if( (zWhere=whereForeignKeys(pParse, pTab))!=0 ){ + sqlite3NestedParse(pParse, + "UPDATE \"%w\".%s SET " + "sql = sqlite_rename_parent(sql, %Q, %Q) " + "WHERE %s;", zDb, SCHEMA_TABLE(iDb), zTabName, zName, zWhere); + sqlite3DbFree(db, zWhere); + } + } +#endif + + /* Modify the sqlite_master table to use the new table name. */ + sqlite3NestedParse(pParse, + "UPDATE %Q.%s SET " +#ifdef SQLITE_OMIT_TRIGGER + "sql = sqlite_rename_table(sql, %Q), " +#else + "sql = CASE " + "WHEN type = 'trigger' THEN sqlite_rename_trigger(sql, %Q)" + "ELSE sqlite_rename_table(sql, %Q) END, " +#endif + "tbl_name = %Q, " + "name = CASE " + "WHEN type='table' THEN %Q " + "WHEN name LIKE 'sqlite_autoindex%%' AND type='index' THEN " + "'sqlite_autoindex_' || %Q || substr(name,%d+18) " + "ELSE name END " + "WHERE tbl_name=%Q COLLATE nocase AND " + "(type='table' OR type='index' OR type='trigger');", + zDb, SCHEMA_TABLE(iDb), zName, zName, zName, +#ifndef SQLITE_OMIT_TRIGGER + zName, +#endif + zName, nTabName, zTabName + ); + +#ifndef SQLITE_OMIT_AUTOINCREMENT + /* If the sqlite_sequence table exists in this database, then update + ** it with the new table name. + */ + if( sqlite3FindTable(db, "sqlite_sequence", zDb) ){ + sqlite3NestedParse(pParse, + "UPDATE \"%w\".sqlite_sequence set name = %Q WHERE name = %Q", + zDb, zName, pTab->zName); + } +#endif -/* -** Set the collating sequence for expression pExpr to be the collating -** sequence named by pToken. Return a pointer to the revised expression. -** The collating sequence is marked as "explicit" using the EP_ExpCollate -** flag. An explicit collating sequence will override implicit -** collating sequences. -*/ -SQLITE_PRIVATE Expr *sqlite3ExprSetCollByToken(Parse *pParse, Expr *pExpr, Token *pCollName){ - char *zColl = 0; /* Dequoted name of collation sequence */ - CollSeq *pColl; - sqlite3 *db = pParse->db; - zColl = sqlite3NameFromToken(db, pCollName); - pColl = sqlite3LocateCollSeq(pParse, zColl); - sqlite3ExprSetColl(pExpr, pColl); - sqlite3DbFree(db, zColl); - return pExpr; -} +#ifndef SQLITE_OMIT_TRIGGER + /* If there are TEMP triggers on this table, modify the sqlite_temp_master + ** table. Don't do this if the table being ALTERed is itself located in + ** the temp database. + */ + if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ + sqlite3NestedParse(pParse, + "UPDATE sqlite_temp_master SET " + "sql = sqlite_rename_trigger(sql, %Q), " + "tbl_name = %Q " + "WHERE %s;", zName, zName, zWhere); + sqlite3DbFree(db, zWhere); + } +#endif -/* -** Return the default collation sequence for the expression pExpr. If -** there is no default collation type, return 0. -*/ -SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr){ - CollSeq *pColl = 0; - Expr *p = pExpr; - while( p ){ - int op; - pColl = p->pColl; - if( pColl ) break; - op = p->op; - if( p->pTab!=0 && ( - op==TK_AGG_COLUMN || op==TK_COLUMN || op==TK_REGISTER || op==TK_TRIGGER - )){ - /* op==TK_REGISTER && p->pTab!=0 happens when pExpr was originally - ** a TK_COLUMN but was previously evaluated and cached in a register */ - const char *zColl; - int j = p->iColumn; - if( j>=0 ){ - sqlite3 *db = pParse->db; - zColl = p->pTab->aCol[j].zColl; - pColl = sqlite3FindCollSeq(db, ENC(db), zColl, 0); - pExpr->pColl = pColl; +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + if( db->flags&SQLITE_ForeignKeys ){ + FKey *p; + for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ + Table *pFrom = p->pFrom; + if( pFrom!=pTab ){ + reloadTableSchema(pParse, p->pFrom, pFrom->zName); } - break; - } - if( op!=TK_CAST && op!=TK_UPLUS ){ - break; } - p = p->pLeft; - } - if( sqlite3CheckCollSeq(pParse, pColl) ){ - pColl = 0; } - return pColl; -} +#endif -/* -** pExpr is an operand of a comparison operator. aff2 is the -** type affinity of the other operand. This routine returns the -** type affinity that should be used for the comparison operator. -*/ -SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2){ - char aff1 = sqlite3ExprAffinity(pExpr); - if( aff1 && aff2 ){ - /* Both sides of the comparison are columns. If one has numeric - ** affinity, use that. Otherwise use no affinity. - */ - if( sqlite3IsNumericAffinity(aff1) || sqlite3IsNumericAffinity(aff2) ){ - return SQLITE_AFF_NUMERIC; - }else{ - return SQLITE_AFF_NONE; - } - }else if( !aff1 && !aff2 ){ - /* Neither side of the comparison is a column. Compare the - ** results directly. - */ - return SQLITE_AFF_NONE; - }else{ - /* One side is a column, the other is not. Use the columns affinity. */ - assert( aff1==0 || aff2==0 ); - return (aff1 + aff2); - } -} + /* Drop and reload the internal table schema. */ + reloadTableSchema(pParse, pTab, zName); -/* -** pExpr is a comparison operator. Return the type affinity that should -** be applied to both operands prior to doing the comparison. -*/ -static char comparisonAffinity(Expr *pExpr){ - char aff; - assert( pExpr->op==TK_EQ || pExpr->op==TK_IN || pExpr->op==TK_LT || - pExpr->op==TK_GT || pExpr->op==TK_GE || pExpr->op==TK_LE || - pExpr->op==TK_NE || pExpr->op==TK_IS || pExpr->op==TK_ISNOT ); - assert( pExpr->pLeft ); - aff = sqlite3ExprAffinity(pExpr->pLeft); - if( pExpr->pRight ){ - aff = sqlite3CompareAffinity(pExpr->pRight, aff); - }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - aff = sqlite3CompareAffinity(pExpr->x.pSelect->pEList->a[0].pExpr, aff); - }else if( !aff ){ - aff = SQLITE_AFF_NONE; - } - return aff; +exit_rename_table: + sqlite3SrcListDelete(db, pSrc); + sqlite3DbFree(db, zName); + db->flags = savedDbFlags; } -/* -** pExpr is a comparison expression, eg. '=', '<', IN(...) etc. -** idx_affinity is the affinity of an indexed column. Return true -** if the index with affinity idx_affinity may be used to implement -** the comparison in pExpr. -*/ -SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity){ - char aff = comparisonAffinity(pExpr); - switch( aff ){ - case SQLITE_AFF_NONE: - return 1; - case SQLITE_AFF_TEXT: - return idx_affinity==SQLITE_AFF_TEXT; - default: - return sqlite3IsNumericAffinity(idx_affinity); - } -} /* -** Return the P5 value that should be used for a binary comparison -** opcode (OP_Eq, OP_Ge etc.) used to compare pExpr1 and pExpr2. +** Generate code to make sure the file format number is at least minFormat. +** The generated code will increase the file format number if necessary. */ -static u8 binaryCompareP5(Expr *pExpr1, Expr *pExpr2, int jumpIfNull){ - u8 aff = (char)sqlite3ExprAffinity(pExpr2); - aff = (u8)sqlite3CompareAffinity(pExpr1, aff) | (u8)jumpIfNull; - return aff; +SQLITE_PRIVATE void sqlite3MinimumFileFormat(Parse *pParse, int iDb, int minFormat){ + Vdbe *v; + v = sqlite3GetVdbe(pParse); + /* The VDBE should have been allocated before this routine is called. + ** If that allocation failed, we would have quit before reaching this + ** point */ + if( ALWAYS(v) ){ + int r1 = sqlite3GetTempReg(pParse); + int r2 = sqlite3GetTempReg(pParse); + int j1; + sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT); + sqlite3VdbeUsesBtree(v, iDb); + sqlite3VdbeAddOp2(v, OP_Integer, minFormat, r2); + j1 = sqlite3VdbeAddOp3(v, OP_Ge, r2, 0, r1); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, r2); + sqlite3VdbeJumpHere(v, j1); + sqlite3ReleaseTempReg(pParse, r1); + sqlite3ReleaseTempReg(pParse, r2); + } } /* -** Return a pointer to the collation sequence that should be used by -** a binary comparison operator comparing pLeft and pRight. -** -** If the left hand expression has a collating sequence type, then it is -** used. Otherwise the collation sequence for the right hand expression -** is used, or the default (BINARY) if neither expression has a collating -** type. +** This function is called after an "ALTER TABLE ... ADD" statement +** has been parsed. Argument pColDef contains the text of the new +** column definition. ** -** Argument pRight (but not pLeft) may be a null pointer. In this case, -** it is not considered. +** The Table structure pParse->pNewTable was extended to include +** the new column during parsing. */ -SQLITE_PRIVATE CollSeq *sqlite3BinaryCompareCollSeq( - Parse *pParse, - Expr *pLeft, - Expr *pRight -){ - CollSeq *pColl; - assert( pLeft ); - if( pLeft->flags & EP_ExpCollate ){ - assert( pLeft->pColl ); - pColl = pLeft->pColl; - }else if( pRight && pRight->flags & EP_ExpCollate ){ - assert( pRight->pColl ); - pColl = pRight->pColl; - }else{ - pColl = sqlite3ExprCollSeq(pParse, pLeft); - if( !pColl ){ - pColl = sqlite3ExprCollSeq(pParse, pRight); - } - } - return pColl; -} +SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *pParse, Token *pColDef){ + Table *pNew; /* Copy of pParse->pNewTable */ + Table *pTab; /* Table being altered */ + int iDb; /* Database number */ + const char *zDb; /* Database name */ + const char *zTab; /* Table name */ + char *zCol; /* Null-terminated column definition */ + Column *pCol; /* The new column */ + Expr *pDflt; /* Default value for the new column */ + sqlite3 *db; /* The database connection; */ -/* -** Generate code for a comparison operator. -*/ -static int codeCompare( - Parse *pParse, /* The parsing (and code generating) context */ - Expr *pLeft, /* The left operand */ - Expr *pRight, /* The right operand */ - int opcode, /* The comparison opcode */ - int in1, int in2, /* Register holding operands */ - int dest, /* Jump here if true. */ - int jumpIfNull /* If true, jump if either operand is NULL */ -){ - int p5; - int addr; - CollSeq *p4; + db = pParse->db; + if( pParse->nErr || db->mallocFailed ) return; + pNew = pParse->pNewTable; + assert( pNew ); - p4 = sqlite3BinaryCompareCollSeq(pParse, pLeft, pRight); - p5 = binaryCompareP5(pLeft, pRight, jumpIfNull); - addr = sqlite3VdbeAddOp4(pParse->pVdbe, opcode, in2, dest, in1, - (void*)p4, P4_COLLSEQ); - sqlite3VdbeChangeP5(pParse->pVdbe, (u8)p5); - return addr; -} + assert( sqlite3BtreeHoldsAllMutexes(db) ); + iDb = sqlite3SchemaToIndex(db, pNew->pSchema); + zDb = db->aDb[iDb].zName; + zTab = &pNew->zName[16]; /* Skip the "sqlite_altertab_" prefix on the name */ + pCol = &pNew->aCol[pNew->nCol-1]; + pDflt = pCol->pDflt; + pTab = sqlite3FindTable(db, zTab, zDb); + assert( pTab ); -#if SQLITE_MAX_EXPR_DEPTH>0 -/* -** Check that argument nHeight is less than or equal to the maximum -** expression depth allowed. If it is not, leave an error message in -** pParse. -*/ -SQLITE_PRIVATE int sqlite3ExprCheckHeight(Parse *pParse, int nHeight){ - int rc = SQLITE_OK; - int mxHeight = pParse->db->aLimit[SQLITE_LIMIT_EXPR_DEPTH]; - if( nHeight>mxHeight ){ +#ifndef SQLITE_OMIT_AUTHORIZATION + /* Invoke the authorization callback. */ + if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){ + return; + } +#endif + + /* If the default value for the new column was specified with a + ** literal NULL, then set pDflt to 0. This simplifies checking + ** for an SQL NULL default below. + */ + if( pDflt && pDflt->op==TK_NULL ){ + pDflt = 0; + } + + /* Check that the new column is not specified as PRIMARY KEY or UNIQUE. + ** If there is a NOT NULL constraint, then the default value for the + ** column must not be NULL. + */ + if( pCol->colFlags & COLFLAG_PRIMKEY ){ + sqlite3ErrorMsg(pParse, "Cannot add a PRIMARY KEY column"); + return; + } + if( pNew->pIndex ){ + sqlite3ErrorMsg(pParse, "Cannot add a UNIQUE column"); + return; + } + if( (db->flags&SQLITE_ForeignKeys) && pNew->pFKey && pDflt ){ sqlite3ErrorMsg(pParse, - "Expression tree is too large (maximum depth %d)", mxHeight - ); - rc = SQLITE_ERROR; + "Cannot add a REFERENCES column with non-NULL default value"); + return; + } + if( pCol->notNull && !pDflt ){ + sqlite3ErrorMsg(pParse, + "Cannot add a NOT NULL column with default value NULL"); + return; } - return rc; -} -/* The following three functions, heightOfExpr(), heightOfExprList() -** and heightOfSelect(), are used to determine the maximum height -** of any expression tree referenced by the structure passed as the -** first argument. -** -** If this maximum height is greater than the current value pointed -** to by pnHeight, the second parameter, then set *pnHeight to that -** value. -*/ -static void heightOfExpr(Expr *p, int *pnHeight){ - if( p ){ - if( p->nHeight>*pnHeight ){ - *pnHeight = p->nHeight; + /* Ensure the default expression is something that sqlite3ValueFromExpr() + ** can handle (i.e. not CURRENT_TIME etc.) + */ + if( pDflt ){ + sqlite3_value *pVal = 0; + if( sqlite3ValueFromExpr(db, pDflt, SQLITE_UTF8, SQLITE_AFF_NONE, &pVal) ){ + db->mallocFailed = 1; + return; } - } -} -static void heightOfExprList(ExprList *p, int *pnHeight){ - if( p ){ - int i; - for(i=0; inExpr; i++){ - heightOfExpr(p->a[i].pExpr, pnHeight); + if( !pVal ){ + sqlite3ErrorMsg(pParse, "Cannot add a column with non-constant default"); + return; } + sqlite3ValueFree(pVal); } -} -static void heightOfSelect(Select *p, int *pnHeight){ - if( p ){ - heightOfExpr(p->pWhere, pnHeight); - heightOfExpr(p->pHaving, pnHeight); - heightOfExpr(p->pLimit, pnHeight); - heightOfExpr(p->pOffset, pnHeight); - heightOfExprList(p->pEList, pnHeight); - heightOfExprList(p->pGroupBy, pnHeight); - heightOfExprList(p->pOrderBy, pnHeight); - heightOfSelect(p->pPrior, pnHeight); - } -} -/* -** Set the Expr.nHeight variable in the structure passed as an -** argument. An expression with no children, Expr.pList or -** Expr.pSelect member has a height of 1. Any other expression -** has a height equal to the maximum height of any other -** referenced Expr plus one. -*/ -static void exprSetHeight(Expr *p){ - int nHeight = 0; - heightOfExpr(p->pLeft, &nHeight); - heightOfExpr(p->pRight, &nHeight); - if( ExprHasProperty(p, EP_xIsSelect) ){ - heightOfSelect(p->x.pSelect, &nHeight); - }else{ - heightOfExprList(p->x.pList, &nHeight); + /* Modify the CREATE TABLE statement. */ + zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n); + if( zCol ){ + char *zEnd = &zCol[pColDef->n-1]; + int savedDbFlags = db->flags; + while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){ + *zEnd-- = '\0'; + } + db->flags |= SQLITE_PreferBuiltin; + sqlite3NestedParse(pParse, + "UPDATE \"%w\".%s SET " + "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) " + "WHERE type = 'table' AND name = %Q", + zDb, SCHEMA_TABLE(iDb), pNew->addColOffset, zCol, pNew->addColOffset+1, + zTab + ); + sqlite3DbFree(db, zCol); + db->flags = savedDbFlags; } - p->nHeight = nHeight + 1; -} -/* -** Set the Expr.nHeight variable using the exprSetHeight() function. If -** the height is greater than the maximum allowed expression depth, -** leave an error in pParse. -*/ -SQLITE_PRIVATE void sqlite3ExprSetHeight(Parse *pParse, Expr *p){ - exprSetHeight(p); - sqlite3ExprCheckHeight(pParse, p->nHeight); -} + /* If the default value of the new column is NULL, then set the file + ** format to 2. If the default value of the new column is not NULL, + ** the file format becomes 3. + */ + sqlite3MinimumFileFormat(pParse, iDb, pDflt ? 3 : 2); -/* -** Return the maximum height of any expression tree referenced -** by the select statement passed as an argument. -*/ -SQLITE_PRIVATE int sqlite3SelectExprHeight(Select *p){ - int nHeight = 0; - heightOfSelect(p, &nHeight); - return nHeight; + /* Reload the schema of the modified table. */ + reloadTableSchema(pParse, pTab, pTab->zName); } -#else - #define exprSetHeight(y) -#endif /* SQLITE_MAX_EXPR_DEPTH>0 */ /* -** This routine is the core allocator for Expr nodes. -** -** Construct a new expression node and return a pointer to it. Memory -** for this node and for the pToken argument is a single allocation -** obtained from sqlite3DbMalloc(). The calling function -** is responsible for making sure the node eventually gets freed. +** This function is called by the parser after the table-name in +** an "ALTER TABLE ADD" statement is parsed. Argument +** pSrc is the full-name of the table being altered. ** -** If dequote is true, then the token (if it exists) is dequoted. -** If dequote is false, no dequoting is performance. The deQuote -** parameter is ignored if pToken is NULL or if the token does not -** appear to be quoted. If the quotes were of the form "..." (double-quotes) -** then the EP_DblQuoted flag is set on the expression node. +** This routine makes a (partial) copy of the Table structure +** for the table being altered and sets Parse.pNewTable to point +** to it. Routines called by the parser as the column definition +** is parsed (i.e. sqlite3AddColumn()) add the new Column data to +** the copy. The copy of the Table structure is deleted by tokenize.c +** after parsing is finished. ** -** Special case: If op==TK_INTEGER and pToken points to a string that -** can be translated into a 32-bit integer, then the token is not -** stored in u.zToken. Instead, the integer values is written -** into u.iValue and the EP_IntValue flag is set. No extra storage -** is allocated to hold the integer text and the dequote flag is ignored. +** Routine sqlite3AlterFinishAddColumn() will be called to complete +** coding the "ALTER TABLE ... ADD" statement. */ -SQLITE_PRIVATE Expr *sqlite3ExprAlloc( - sqlite3 *db, /* Handle for sqlite3DbMallocZero() (may be null) */ - int op, /* Expression opcode */ - const Token *pToken, /* Token argument. Might be NULL */ - int dequote /* True to dequote */ -){ - Expr *pNew; - int nExtra = 0; - int iValue = 0; +SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *pParse, SrcList *pSrc){ + Table *pNew; + Table *pTab; + Vdbe *v; + int iDb; + int i; + int nAlloc; + sqlite3 *db = pParse->db; - if( pToken ){ - if( op!=TK_INTEGER || pToken->z==0 - || sqlite3GetInt32(pToken->z, &iValue)==0 ){ - nExtra = pToken->n+1; - assert( iValue>=0 ); - } + /* Look up the table being altered. */ + assert( pParse->pNewTable==0 ); + assert( sqlite3BtreeHoldsAllMutexes(db) ); + if( db->mallocFailed ) goto exit_begin_add_column; + pTab = sqlite3LocateTableItem(pParse, 0, &pSrc->a[0]); + if( !pTab ) goto exit_begin_add_column; + +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + sqlite3ErrorMsg(pParse, "virtual tables may not be altered"); + goto exit_begin_add_column; } - pNew = sqlite3DbMallocZero(db, sizeof(Expr)+nExtra); - if( pNew ){ - pNew->op = (u8)op; - pNew->iAgg = -1; - if( pToken ){ - if( nExtra==0 ){ - pNew->flags |= EP_IntValue; - pNew->u.iValue = iValue; - }else{ - int c; - pNew->u.zToken = (char*)&pNew[1]; - memcpy(pNew->u.zToken, pToken->z, pToken->n); - pNew->u.zToken[pToken->n] = 0; - if( dequote && nExtra>=3 - && ((c = pToken->z[0])=='\'' || c=='"' || c=='[' || c=='`') ){ - sqlite3Dequote(pNew->u.zToken); - if( c=='"' ) pNew->flags |= EP_DblQuoted; - } - } - } -#if SQLITE_MAX_EXPR_DEPTH>0 - pNew->nHeight = 1; -#endif +#endif + + /* Make sure this is not an attempt to ALTER a view. */ + if( pTab->pSelect ){ + sqlite3ErrorMsg(pParse, "Cannot add a column to a view"); + goto exit_begin_add_column; } - return pNew; + if( SQLITE_OK!=isSystemTable(pParse, pTab->zName) ){ + goto exit_begin_add_column; + } + + assert( pTab->addColOffset>0 ); + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + + /* Put a copy of the Table struct in Parse.pNewTable for the + ** sqlite3AddColumn() function and friends to modify. But modify + ** the name by adding an "sqlite_altertab_" prefix. By adding this + ** prefix, we insure that the name will not collide with an existing + ** table because user table are not allowed to have the "sqlite_" + ** prefix on their name. + */ + pNew = (Table*)sqlite3DbMallocZero(db, sizeof(Table)); + if( !pNew ) goto exit_begin_add_column; + pParse->pNewTable = pNew; + pNew->nRef = 1; + pNew->nCol = pTab->nCol; + assert( pNew->nCol>0 ); + nAlloc = (((pNew->nCol-1)/8)*8)+8; + assert( nAlloc>=pNew->nCol && nAlloc%8==0 && nAlloc-pNew->nCol<8 ); + pNew->aCol = (Column*)sqlite3DbMallocZero(db, sizeof(Column)*nAlloc); + pNew->zName = sqlite3MPrintf(db, "sqlite_altertab_%s", pTab->zName); + if( !pNew->aCol || !pNew->zName ){ + db->mallocFailed = 1; + goto exit_begin_add_column; + } + memcpy(pNew->aCol, pTab->aCol, sizeof(Column)*pNew->nCol); + for(i=0; inCol; i++){ + Column *pCol = &pNew->aCol[i]; + pCol->zName = sqlite3DbStrDup(db, pCol->zName); + pCol->zColl = 0; + pCol->zType = 0; + pCol->pDflt = 0; + pCol->zDflt = 0; + } + pNew->pSchema = db->aDb[iDb].pSchema; + pNew->addColOffset = pTab->addColOffset; + pNew->nRef = 1; + + /* Begin a transaction and increment the schema cookie. */ + sqlite3BeginWriteOperation(pParse, 0, iDb); + v = sqlite3GetVdbe(pParse); + if( !v ) goto exit_begin_add_column; + sqlite3ChangeCookie(pParse, iDb); + +exit_begin_add_column: + sqlite3SrcListDelete(db, pSrc); + return; } +#endif /* SQLITE_ALTER_TABLE */ +/************** End of alter.c ***********************************************/ +/************** Begin file analyze.c *****************************************/ /* -** Allocate a new expression node from a zero-terminated token that has -** already been dequoted. +** 2005-07-08 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code associated with the ANALYZE command. +** +** The ANALYZE command gather statistics about the content of tables +** and indices. These statistics are made available to the query planner +** to help it make better decisions about how to perform queries. +** +** The following system tables are or have been supported: +** +** CREATE TABLE sqlite_stat1(tbl, idx, stat); +** CREATE TABLE sqlite_stat2(tbl, idx, sampleno, sample); +** CREATE TABLE sqlite_stat3(tbl, idx, nEq, nLt, nDLt, sample); +** CREATE TABLE sqlite_stat4(tbl, idx, nEq, nLt, nDLt, sample); +** +** Additional tables might be added in future releases of SQLite. +** The sqlite_stat2 table is not created or used unless the SQLite version +** is between 3.6.18 and 3.7.8, inclusive, and unless SQLite is compiled +** with SQLITE_ENABLE_STAT2. The sqlite_stat2 table is deprecated. +** The sqlite_stat2 table is superseded by sqlite_stat3, which is only +** created and used by SQLite versions 3.7.9 and later and with +** SQLITE_ENABLE_STAT3 defined. The functionality of sqlite_stat3 +** is a superset of sqlite_stat2. The sqlite_stat4 is an enhanced +** version of sqlite_stat3 and is only available when compiled with +** SQLITE_ENABLE_STAT4 and in SQLite versions 3.8.1 and later. It is +** not possible to enable both STAT3 and STAT4 at the same time. If they +** are both enabled, then STAT4 takes precedence. +** +** For most applications, sqlite_stat1 provides all the statistics required +** for the query planner to make good choices. +** +** Format of sqlite_stat1: +** +** There is normally one row per index, with the index identified by the +** name in the idx column. The tbl column is the name of the table to +** which the index belongs. In each such row, the stat column will be +** a string consisting of a list of integers. The first integer in this +** list is the number of rows in the index. (This is the same as the +** number of rows in the table, except for partial indices.) The second +** integer is the average number of rows in the index that have the same +** value in the first column of the index. The third integer is the average +** number of rows in the index that have the same value for the first two +** columns. The N-th integer (for N>1) is the average number of rows in +** the index which have the same value for the first N-1 columns. For +** a K-column index, there will be K+1 integers in the stat column. If +** the index is unique, then the last integer will be 1. +** +** The list of integers in the stat column can optionally be followed +** by the keyword "unordered". The "unordered" keyword, if it is present, +** must be separated from the last integer by a single space. If the +** "unordered" keyword is present, then the query planner assumes that +** the index is unordered and will not use the index for a range query. +** +** If the sqlite_stat1.idx column is NULL, then the sqlite_stat1.stat +** column contains a single integer which is the (estimated) number of +** rows in the table identified by sqlite_stat1.tbl. +** +** Format of sqlite_stat2: +** +** The sqlite_stat2 is only created and is only used if SQLite is compiled +** with SQLITE_ENABLE_STAT2 and if the SQLite version number is between +** 3.6.18 and 3.7.8. The "stat2" table contains additional information +** about the distribution of keys within an index. The index is identified by +** the "idx" column and the "tbl" column is the name of the table to which +** the index belongs. There are usually 10 rows in the sqlite_stat2 +** table for each index. +** +** The sqlite_stat2 entries for an index that have sampleno between 0 and 9 +** inclusive are samples of the left-most key value in the index taken at +** evenly spaced points along the index. Let the number of samples be S +** (10 in the standard build) and let C be the number of rows in the index. +** Then the sampled rows are given by: +** +** rownumber = (i*C*2 + C)/(S*2) +** +** For i between 0 and S-1. Conceptually, the index space is divided into +** S uniform buckets and the samples are the middle row from each bucket. +** +** The format for sqlite_stat2 is recorded here for legacy reference. This +** version of SQLite does not support sqlite_stat2. It neither reads nor +** writes the sqlite_stat2 table. This version of SQLite only supports +** sqlite_stat3. +** +** Format for sqlite_stat3: +** +** The sqlite_stat3 format is a subset of sqlite_stat4. Hence, the +** sqlite_stat4 format will be described first. Further information +** about sqlite_stat3 follows the sqlite_stat4 description. +** +** Format for sqlite_stat4: +** +** As with sqlite_stat2, the sqlite_stat4 table contains histogram data +** to aid the query planner in choosing good indices based on the values +** that indexed columns are compared against in the WHERE clauses of +** queries. +** +** The sqlite_stat4 table contains multiple entries for each index. +** The idx column names the index and the tbl column is the table of the +** index. If the idx and tbl columns are the same, then the sample is +** of the INTEGER PRIMARY KEY. The sample column is a blob which is the +** binary encoding of a key from the index. The nEq column is a +** list of integers. The first integer is the approximate number +** of entries in the index whose left-most column exactly matches +** the left-most column of the sample. The second integer in nEq +** is the approximate number of entries in the index where the +** first two columns match the first two columns of the sample. +** And so forth. nLt is another list of integers that show the approximate +** number of entries that are strictly less than the sample. The first +** integer in nLt contains the number of entries in the index where the +** left-most column is less than the left-most column of the sample. +** The K-th integer in the nLt entry is the number of index entries +** where the first K columns are less than the first K columns of the +** sample. The nDLt column is like nLt except that it contains the +** number of distinct entries in the index that are less than the +** sample. +** +** There can be an arbitrary number of sqlite_stat4 entries per index. +** The ANALYZE command will typically generate sqlite_stat4 tables +** that contain between 10 and 40 samples which are distributed across +** the key space, though not uniformly, and which include samples with +** large nEq values. +** +** Format for sqlite_stat3 redux: +** +** The sqlite_stat3 table is like sqlite_stat4 except that it only +** looks at the left-most column of the index. The sqlite_stat3.sample +** column contains the actual value of the left-most column instead +** of a blob encoding of the complete index key as is found in +** sqlite_stat4.sample. The nEq, nLt, and nDLt entries of sqlite_stat3 +** all contain just a single integer which is the same as the first +** integer in the equivalent columns in sqlite_stat4. */ -SQLITE_PRIVATE Expr *sqlite3Expr( - sqlite3 *db, /* Handle for sqlite3DbMallocZero() (may be null) */ - int op, /* Expression opcode */ - const char *zToken /* Token argument. Might be NULL */ -){ - Token x; - x.z = zToken; - x.n = zToken ? sqlite3Strlen30(zToken) : 0; - return sqlite3ExprAlloc(db, op, &x, 0); -} +#ifndef SQLITE_OMIT_ANALYZE + +#if defined(SQLITE_ENABLE_STAT4) +# define IsStat4 1 +# define IsStat3 0 +#elif defined(SQLITE_ENABLE_STAT3) +# define IsStat4 0 +# define IsStat3 1 +#else +# define IsStat4 0 +# define IsStat3 0 +# undef SQLITE_STAT4_SAMPLES +# define SQLITE_STAT4_SAMPLES 1 +#endif +#define IsStat34 (IsStat3+IsStat4) /* 1 for STAT3 or STAT4. 0 otherwise */ /* -** Attach subtrees pLeft and pRight to the Expr node pRoot. +** This routine generates code that opens the sqlite_statN tables. +** The sqlite_stat1 table is always relevant. sqlite_stat2 is now +** obsolete. sqlite_stat3 and sqlite_stat4 are only opened when +** appropriate compile-time options are provided. ** -** If pRoot==NULL that means that a memory allocation error has occurred. -** In that case, delete the subtrees pLeft and pRight. +** If the sqlite_statN tables do not previously exist, it is created. +** +** Argument zWhere may be a pointer to a buffer containing a table name, +** or it may be a NULL pointer. If it is not NULL, then all entries in +** the sqlite_statN tables associated with the named table are deleted. +** If zWhere==0, then code is generated to delete all stat table entries. */ -SQLITE_PRIVATE void sqlite3ExprAttachSubtrees( - sqlite3 *db, - Expr *pRoot, - Expr *pLeft, - Expr *pRight +static void openStatTable( + Parse *pParse, /* Parsing context */ + int iDb, /* The database we are looking in */ + int iStatCur, /* Open the sqlite_stat1 table on this cursor */ + const char *zWhere, /* Delete entries for this table or index */ + const char *zWhereType /* Either "tbl" or "idx" */ ){ - if( pRoot==0 ){ - assert( db->mallocFailed ); - sqlite3ExprDelete(db, pLeft); - sqlite3ExprDelete(db, pRight); - }else{ - if( pRight ){ - pRoot->pRight = pRight; - if( pRight->flags & EP_ExpCollate ){ - pRoot->flags |= EP_ExpCollate; - pRoot->pColl = pRight->pColl; + static const struct { + const char *zName; + const char *zCols; + } aTable[] = { + { "sqlite_stat1", "tbl,idx,stat" }, +#if defined(SQLITE_ENABLE_STAT4) + { "sqlite_stat4", "tbl,idx,neq,nlt,ndlt,sample" }, + { "sqlite_stat3", 0 }, +#elif defined(SQLITE_ENABLE_STAT3) + { "sqlite_stat3", "tbl,idx,neq,nlt,ndlt,sample" }, + { "sqlite_stat4", 0 }, +#else + { "sqlite_stat3", 0 }, + { "sqlite_stat4", 0 }, +#endif + }; + int i; + sqlite3 *db = pParse->db; + Db *pDb; + Vdbe *v = sqlite3GetVdbe(pParse); + int aRoot[ArraySize(aTable)]; + u8 aCreateTbl[ArraySize(aTable)]; + + if( v==0 ) return; + assert( sqlite3BtreeHoldsAllMutexes(db) ); + assert( sqlite3VdbeDb(v)==db ); + pDb = &db->aDb[iDb]; + + /* Create new statistic tables if they do not exist, or clear them + ** if they do already exist. + */ + for(i=0; izName))==0 ){ + if( aTable[i].zCols ){ + /* The sqlite_statN table does not exist. Create it. Note that a + ** side-effect of the CREATE TABLE statement is to leave the rootpage + ** of the new table in register pParse->regRoot. This is important + ** because the OpenWrite opcode below will be needing it. */ + sqlite3NestedParse(pParse, + "CREATE TABLE %Q.%s(%s)", pDb->zName, zTab, aTable[i].zCols + ); + aRoot[i] = pParse->regRoot; + aCreateTbl[i] = OPFLAG_P2ISREG; } - } - if( pLeft ){ - pRoot->pLeft = pLeft; - if( pLeft->flags & EP_ExpCollate ){ - pRoot->flags |= EP_ExpCollate; - pRoot->pColl = pLeft->pColl; + }else{ + /* The table already exists. If zWhere is not NULL, delete all entries + ** associated with the table zWhere. If zWhere is NULL, delete the + ** entire contents of the table. */ + aRoot[i] = pStat->tnum; + aCreateTbl[i] = 0; + sqlite3TableLock(pParse, iDb, aRoot[i], 1, zTab); + if( zWhere ){ + sqlite3NestedParse(pParse, + "DELETE FROM %Q.%s WHERE %s=%Q", + pDb->zName, zTab, zWhereType, zWhere + ); + }else{ + /* The sqlite_stat[134] table already exists. Delete all rows. */ + sqlite3VdbeAddOp2(v, OP_Clear, aRoot[i], iDb); } } - exprSetHeight(pRoot); } -} -/* -** Allocate a Expr node which joins as many as two subtrees. -** -** One or both of the subtrees can be NULL. Return a pointer to the new -** Expr node. Or, if an OOM error occurs, set pParse->db->mallocFailed, -** free the subtrees and return NULL. -*/ -SQLITE_PRIVATE Expr *sqlite3PExpr( - Parse *pParse, /* Parsing context */ - int op, /* Expression opcode */ - Expr *pLeft, /* Left operand */ - Expr *pRight, /* Right operand */ - const Token *pToken /* Argument token */ -){ - Expr *p = sqlite3ExprAlloc(pParse->db, op, pToken, 1); - sqlite3ExprAttachSubtrees(pParse->db, p, pLeft, pRight); - if( p ) { - sqlite3ExprCheckHeight(pParse, p->nHeight); + /* Open the sqlite_stat[134] tables for writing. */ + for(i=0; aTable[i].zCols; i++){ + assert( idb; - assert( pToken ); - pNew = sqlite3ExprAlloc(db, TK_FUNCTION, pToken, 1); - if( pNew==0 ){ - sqlite3ExprListDelete(db, pList); /* Avoid memory leak when malloc fails */ - return 0; - } - pNew->x.pList = pList; - assert( !ExprHasProperty(pNew, EP_xIsSelect) ); - sqlite3ExprSetHeight(pParse, pNew); - return pNew; -} +typedef struct Stat4Accum Stat4Accum; +typedef struct Stat4Sample Stat4Sample; +struct Stat4Sample { + tRowcnt *anEq; /* sqlite_stat4.nEq */ + tRowcnt *anDLt; /* sqlite_stat4.nDLt */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + tRowcnt *anLt; /* sqlite_stat4.nLt */ + union { + i64 iRowid; /* Rowid in main table of the key */ + u8 *aRowid; /* Key for WITHOUT ROWID tables */ + } u; + u32 nRowid; /* Sizeof aRowid[] */ + u8 isPSample; /* True if a periodic sample */ + int iCol; /* If !isPSample, the reason for inclusion */ + u32 iHash; /* Tiebreaker hash */ +#endif +}; +struct Stat4Accum { + tRowcnt nRow; /* Number of rows in the entire table */ + tRowcnt nPSample; /* How often to do a periodic sample */ + int nCol; /* Number of columns in index + pk/rowid */ + int nKeyCol; /* Number of index columns w/o the pk/rowid */ + int mxSample; /* Maximum number of samples to accumulate */ + Stat4Sample current; /* Current row as a Stat4Sample */ + u32 iPrn; /* Pseudo-random number used for sampling */ + Stat4Sample *aBest; /* Array of nCol best samples */ + int iMin; /* Index in a[] of entry with minimum score */ + int nSample; /* Current number of samples */ + int iGet; /* Index of current sample accessed by stat_get() */ + Stat4Sample *a; /* Array of mxSample Stat4Sample objects */ + sqlite3 *db; /* Database connection, for malloc() */ +}; -/* -** Assign a variable number to an expression that encodes a wildcard -** in the original SQL statement. -** -** Wildcards consisting of a single "?" are assigned the next sequential -** variable number. -** -** Wildcards of the form "?nnn" are assigned the number "nnn". We make -** sure "nnn" is not too be to avoid a denial of service attack when -** the SQL statement comes from an external source. -** -** Wildcards of the form ":aaa", "@aaa", or "$aaa" are assigned the same number -** as the previous instance of the same wildcard. Or if this is the first -** instance of the wildcard, the next sequenial variable number is -** assigned. +/* Reclaim memory used by a Stat4Sample */ -SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr){ - sqlite3 *db = pParse->db; - const char *z; - - if( pExpr==0 ) return; - assert( !ExprHasAnyProperty(pExpr, EP_IntValue|EP_Reduced|EP_TokenOnly) ); - z = pExpr->u.zToken; - assert( z!=0 ); - assert( z[0]!=0 ); - if( z[1]==0 ){ - /* Wildcard of the form "?". Assign the next variable number */ - assert( z[0]=='?' ); - pExpr->iColumn = (ynVar)(++pParse->nVar); - }else{ - ynVar x = 0; - u32 n = sqlite3Strlen30(z); - if( z[0]=='?' ){ - /* Wildcard of the form "?nnn". Convert "nnn" to an integer and - ** use it as the variable number */ - i64 i; - int bOk = 0==sqlite3Atoi64(&z[1], &i, n-1, SQLITE_UTF8); - pExpr->iColumn = x = (ynVar)i; - testcase( i==0 ); - testcase( i==1 ); - testcase( i==db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]-1 ); - testcase( i==db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ); - if( bOk==0 || i<1 || i>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){ - sqlite3ErrorMsg(pParse, "variable number must be between ?1 and ?%d", - db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]); - x = 0; - } - if( i>pParse->nVar ){ - pParse->nVar = (int)i; - } - }else{ - /* Wildcards like ":aaa", "$aaa" or "@aaa". Reuse the same variable - ** number as the prior appearance of the same name, or if the name - ** has never appeared before, reuse the same variable number - */ - ynVar i; - for(i=0; inzVar; i++){ - if( pParse->azVar[i] && memcmp(pParse->azVar[i],z,n+1)==0 ){ - pExpr->iColumn = x = (ynVar)i+1; - break; - } - } - if( x==0 ) x = pExpr->iColumn = (ynVar)(++pParse->nVar); - } - if( x>0 ){ - if( x>pParse->nzVar ){ - char **a; - a = sqlite3DbRealloc(db, pParse->azVar, x*sizeof(a[0])); - if( a==0 ) return; /* Error reported through db->mallocFailed */ - pParse->azVar = a; - memset(&a[pParse->nzVar], 0, (x-pParse->nzVar)*sizeof(a[0])); - pParse->nzVar = x; - } - if( z[0]!='?' || pParse->azVar[x-1]==0 ){ - sqlite3DbFree(db, pParse->azVar[x-1]); - pParse->azVar[x-1] = sqlite3DbStrNDup(db, z, n); - } - } - } - if( !pParse->nErr && pParse->nVar>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){ - sqlite3ErrorMsg(pParse, "too many SQL variables"); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +static void sampleClear(sqlite3 *db, Stat4Sample *p){ + assert( db!=0 ); + if( p->nRowid ){ + sqlite3DbFree(db, p->u.aRowid); + p->nRowid = 0; } } +#endif -/* -** Recursively delete an expression tree. +/* Initialize the BLOB value of a ROWID */ -SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3 *db, Expr *p){ - if( p==0 ) return; - /* Sanity check: Assert that the IntValue is non-negative if it exists */ - assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 ); - if( !ExprHasAnyProperty(p, EP_TokenOnly) ){ - sqlite3ExprDelete(db, p->pLeft); - sqlite3ExprDelete(db, p->pRight); - if( !ExprHasProperty(p, EP_Reduced) && (p->flags2 & EP2_MallocedToken)!=0 ){ - sqlite3DbFree(db, p->u.zToken); - } - if( ExprHasProperty(p, EP_xIsSelect) ){ - sqlite3SelectDelete(db, p->x.pSelect); - }else{ - sqlite3ExprListDelete(db, p->x.pList); - } - } - if( !ExprHasProperty(p, EP_Static) ){ - sqlite3DbFree(db, p); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +static void sampleSetRowid(sqlite3 *db, Stat4Sample *p, int n, const u8 *pData){ + assert( db!=0 ); + if( p->nRowid ) sqlite3DbFree(db, p->u.aRowid); + p->u.aRowid = sqlite3DbMallocRaw(db, n); + if( p->u.aRowid ){ + p->nRowid = n; + memcpy(p->u.aRowid, pData, n); + }else{ + p->nRowid = 0; } } +#endif -/* -** Return the number of bytes allocated for the expression structure -** passed as the first argument. This is always one of EXPR_FULLSIZE, -** EXPR_REDUCEDSIZE or EXPR_TOKENONLYSIZE. +/* Initialize the INTEGER value of a ROWID. */ -static int exprStructSize(Expr *p){ - if( ExprHasProperty(p, EP_TokenOnly) ) return EXPR_TOKENONLYSIZE; - if( ExprHasProperty(p, EP_Reduced) ) return EXPR_REDUCEDSIZE; - return EXPR_FULLSIZE; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +static void sampleSetRowidInt64(sqlite3 *db, Stat4Sample *p, i64 iRowid){ + assert( db!=0 ); + if( p->nRowid ) sqlite3DbFree(db, p->u.aRowid); + p->nRowid = 0; + p->u.iRowid = iRowid; } +#endif + /* -** The dupedExpr*Size() routines each return the number of bytes required -** to store a copy of an expression or expression tree. They differ in -** how much of the tree is measured. -** -** dupedExprStructSize() Size of only the Expr structure -** dupedExprNodeSize() Size of Expr + space for token -** dupedExprSize() Expr + token + subtree components -** -*************************************************************************** -** -** The dupedExprStructSize() function returns two values OR-ed together: -** (1) the space required for a copy of the Expr structure only and -** (2) the EP_xxx flags that indicate what the structure size should be. -** The return values is always one of: -** -** EXPR_FULLSIZE -** EXPR_REDUCEDSIZE | EP_Reduced -** EXPR_TOKENONLYSIZE | EP_TokenOnly -** -** The size of the structure can be found by masking the return value -** of this routine with 0xfff. The flags can be found by masking the -** return value with EP_Reduced|EP_TokenOnly. -** -** Note that with flags==EXPRDUP_REDUCE, this routines works on full-size -** (unreduced) Expr objects as they or originally constructed by the parser. -** During expression analysis, extra information is computed and moved into -** later parts of teh Expr object and that extra information might get chopped -** off if the expression is reduced. Note also that it does not work to -** make a EXPRDUP_REDUCE copy of a reduced expression. It is only legal -** to reduce a pristine expression tree from the parser. The implementation -** of dupedExprStructSize() contain multiple assert() statements that attempt -** to enforce this constraint. +** Copy the contents of object (*pFrom) into (*pTo). */ -static int dupedExprStructSize(Expr *p, int flags){ - int nSize; - assert( flags==EXPRDUP_REDUCE || flags==0 ); /* Only one flag value allowed */ - if( 0==(flags&EXPRDUP_REDUCE) ){ - nSize = EXPR_FULLSIZE; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +static void sampleCopy(Stat4Accum *p, Stat4Sample *pTo, Stat4Sample *pFrom){ + pTo->isPSample = pFrom->isPSample; + pTo->iCol = pFrom->iCol; + pTo->iHash = pFrom->iHash; + memcpy(pTo->anEq, pFrom->anEq, sizeof(tRowcnt)*p->nCol); + memcpy(pTo->anLt, pFrom->anLt, sizeof(tRowcnt)*p->nCol); + memcpy(pTo->anDLt, pFrom->anDLt, sizeof(tRowcnt)*p->nCol); + if( pFrom->nRowid ){ + sampleSetRowid(p->db, pTo, pFrom->nRowid, pFrom->u.aRowid); }else{ - assert( !ExprHasAnyProperty(p, EP_TokenOnly|EP_Reduced) ); - assert( !ExprHasProperty(p, EP_FromJoin) ); - assert( (p->flags2 & EP2_MallocedToken)==0 ); - assert( (p->flags2 & EP2_Irreducible)==0 ); - if( p->pLeft || p->pRight || p->pColl || p->x.pList ){ - nSize = EXPR_REDUCEDSIZE | EP_Reduced; - }else{ - nSize = EXPR_TOKENONLYSIZE | EP_TokenOnly; - } + sampleSetRowidInt64(p->db, pTo, pFrom->u.iRowid); } - return nSize; } +#endif /* -** This function returns the space in bytes required to store the copy -** of the Expr structure and a copy of the Expr.u.zToken string (if that -** string is defined.) +** Reclaim all memory of a Stat4Accum structure. */ -static int dupedExprNodeSize(Expr *p, int flags){ - int nByte = dupedExprStructSize(p, flags) & 0xfff; - if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){ - nByte += sqlite3Strlen30(p->u.zToken)+1; - } - return ROUND8(nByte); +static void stat4Destructor(void *pOld){ + Stat4Accum *p = (Stat4Accum*)pOld; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + int i; + for(i=0; inCol; i++) sampleClear(p->db, p->aBest+i); + for(i=0; imxSample; i++) sampleClear(p->db, p->a+i); + sampleClear(p->db, &p->current); +#endif + sqlite3DbFree(p->db, p); } /* -** Return the number of bytes required to create a duplicate of the -** expression passed as the first argument. The second argument is a -** mask containing EXPRDUP_XXX flags. +** Implementation of the stat_init(N,K,C) SQL function. The three parameters +** are: +** N: The number of columns in the index including the rowid/pk (note 1) +** K: The number of columns in the index excluding the rowid/pk. +** C: The number of rows in the index (note 2) ** -** The value returned includes space to create a copy of the Expr struct -** itself and the buffer referred to by Expr.u.zToken, if any. +** Note 1: In the special case of the covering index that implements a +** WITHOUT ROWID table, N is the number of PRIMARY KEY columns, not the +** total number of columns in the table. ** -** If the EXPRDUP_REDUCE flag is set, then the return value includes -** space to duplicate all Expr nodes in the tree formed by Expr.pLeft -** and Expr.pRight variables (but not for any structures pointed to or -** descended from the Expr.x.pList or Expr.x.pSelect variables). -*/ -static int dupedExprSize(Expr *p, int flags){ - int nByte = 0; - if( p ){ - nByte = dupedExprNodeSize(p, flags); - if( flags&EXPRDUP_REDUCE ){ - nByte += dupedExprSize(p->pLeft, flags) + dupedExprSize(p->pRight, flags); - } - } - return nByte; -} - -/* -** This function is similar to sqlite3ExprDup(), except that if pzBuffer -** is not NULL then *pzBuffer is assumed to point to a buffer large enough -** to store the copy of expression p, the copies of p->u.zToken -** (if applicable), and the copies of the p->pLeft and p->pRight expressions, -** if any. Before returning, *pzBuffer is set to the first byte passed the -** portion of the buffer copied into by this function. +** Note 2: C is only used for STAT3 and STAT4. +** +** For indexes on ordinary rowid tables, N==K+1. But for indexes on +** WITHOUT ROWID tables, N=K+P where P is the number of columns in the +** PRIMARY KEY of the table. The covering index that implements the +** original WITHOUT ROWID table as N==K as a special case. +** +** This routine allocates the Stat4Accum object in heap memory. The return +** value is a pointer to the Stat4Accum object. The datatype of the +** return value is BLOB, but it is really just a pointer to the Stat4Accum +** object. */ -static Expr *exprDup(sqlite3 *db, Expr *p, int flags, u8 **pzBuffer){ - Expr *pNew = 0; /* Value to return */ - if( p ){ - const int isReduced = (flags&EXPRDUP_REDUCE); - u8 *zAlloc; - u32 staticFlag = 0; - - assert( pzBuffer==0 || isReduced ); - - /* Figure out where to write the new Expr structure. */ - if( pzBuffer ){ - zAlloc = *pzBuffer; - staticFlag = EP_Static; - }else{ - zAlloc = sqlite3DbMallocRaw(db, dupedExprSize(p, flags)); - } - pNew = (Expr *)zAlloc; - - if( pNew ){ - /* Set nNewSize to the size allocated for the structure pointed to - ** by pNew. This is either EXPR_FULLSIZE, EXPR_REDUCEDSIZE or - ** EXPR_TOKENONLYSIZE. nToken is set to the number of bytes consumed - ** by the copy of the p->u.zToken string (if any). - */ - const unsigned nStructSize = dupedExprStructSize(p, flags); - const int nNewSize = nStructSize & 0xfff; - int nToken; - if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){ - nToken = sqlite3Strlen30(p->u.zToken) + 1; - }else{ - nToken = 0; - } - if( isReduced ){ - assert( ExprHasProperty(p, EP_Reduced)==0 ); - memcpy(zAlloc, p, nNewSize); - }else{ - int nSize = exprStructSize(p); - memcpy(zAlloc, p, nSize); - memset(&zAlloc[nSize], 0, EXPR_FULLSIZE-nSize); - } - - /* Set the EP_Reduced, EP_TokenOnly, and EP_Static flags appropriately. */ - pNew->flags &= ~(EP_Reduced|EP_TokenOnly|EP_Static); - pNew->flags |= nStructSize & (EP_Reduced|EP_TokenOnly); - pNew->flags |= staticFlag; - - /* Copy the p->u.zToken string, if any. */ - if( nToken ){ - char *zToken = pNew->u.zToken = (char*)&zAlloc[nNewSize]; - memcpy(zToken, p->u.zToken, nToken); - } +static void statInit( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + Stat4Accum *p; + int nCol; /* Number of columns in index being sampled */ + int nKeyCol; /* Number of key columns */ + int nColUp; /* nCol rounded up for alignment */ + int n; /* Bytes of space to allocate */ + sqlite3 *db; /* Database connection */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + int mxSample = SQLITE_STAT4_SAMPLES; +#endif - if( 0==((p->flags|pNew->flags) & EP_TokenOnly) ){ - /* Fill in the pNew->x.pSelect or pNew->x.pList member. */ - if( ExprHasProperty(p, EP_xIsSelect) ){ - pNew->x.pSelect = sqlite3SelectDup(db, p->x.pSelect, isReduced); - }else{ - pNew->x.pList = sqlite3ExprListDup(db, p->x.pList, isReduced); - } - } + /* Decode the three function arguments */ + UNUSED_PARAMETER(argc); + nCol = sqlite3_value_int(argv[0]); + assert( nCol>0 ); + nColUp = sizeof(tRowcnt)<8 ? (nCol+1)&~1 : nCol; + nKeyCol = sqlite3_value_int(argv[1]); + assert( nKeyCol<=nCol ); + assert( nKeyCol>0 ); + + /* Allocate the space required for the Stat4Accum object */ + n = sizeof(*p) + + sizeof(tRowcnt)*nColUp /* Stat4Accum.anEq */ + + sizeof(tRowcnt)*nColUp /* Stat4Accum.anDLt */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + + sizeof(tRowcnt)*nColUp /* Stat4Accum.anLt */ + + sizeof(Stat4Sample)*(nCol+mxSample) /* Stat4Accum.aBest[], a[] */ + + sizeof(tRowcnt)*3*nColUp*(nCol+mxSample) +#endif + ; + db = sqlite3_context_db_handle(context); + p = sqlite3DbMallocZero(db, n); + if( p==0 ){ + sqlite3_result_error_nomem(context); + return; + } - /* Fill in pNew->pLeft and pNew->pRight. */ - if( ExprHasAnyProperty(pNew, EP_Reduced|EP_TokenOnly) ){ - zAlloc += dupedExprNodeSize(p, flags); - if( ExprHasProperty(pNew, EP_Reduced) ){ - pNew->pLeft = exprDup(db, p->pLeft, EXPRDUP_REDUCE, &zAlloc); - pNew->pRight = exprDup(db, p->pRight, EXPRDUP_REDUCE, &zAlloc); - } - if( pzBuffer ){ - *pzBuffer = zAlloc; - } - }else{ - pNew->flags2 = 0; - if( !ExprHasAnyProperty(p, EP_TokenOnly) ){ - pNew->pLeft = sqlite3ExprDup(db, p->pLeft, 0); - pNew->pRight = sqlite3ExprDup(db, p->pRight, 0); - } - } + p->db = db; + p->nRow = 0; + p->nCol = nCol; + p->nKeyCol = nKeyCol; + p->current.anDLt = (tRowcnt*)&p[1]; + p->current.anEq = &p->current.anDLt[nColUp]; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + { + u8 *pSpace; /* Allocated space not yet assigned */ + int i; /* Used to iterate through p->aSample[] */ + + p->iGet = -1; + p->mxSample = mxSample; + p->nPSample = (tRowcnt)(sqlite3_value_int64(argv[2])/(mxSample/3+1) + 1); + p->current.anLt = &p->current.anEq[nColUp]; + p->iPrn = nCol*0x689e962d ^ sqlite3_value_int(argv[2])*0xd0944565; + + /* Set up the Stat4Accum.a[] and aBest[] arrays */ + p->a = (struct Stat4Sample*)&p->current.anLt[nColUp]; + p->aBest = &p->a[mxSample]; + pSpace = (u8*)(&p->a[mxSample+nCol]); + for(i=0; i<(mxSample+nCol); i++){ + p->a[i].anEq = (tRowcnt *)pSpace; pSpace += (sizeof(tRowcnt) * nColUp); + p->a[i].anLt = (tRowcnt *)pSpace; pSpace += (sizeof(tRowcnt) * nColUp); + p->a[i].anDLt = (tRowcnt *)pSpace; pSpace += (sizeof(tRowcnt) * nColUp); + } + assert( (pSpace - (u8*)p)==n ); + + for(i=0; iaBest[i].iCol = i; } } - return pNew; -} +#endif + + /* Return a pointer to the allocated object to the caller. Note that + ** only the pointer (the 2nd parameter) matters. The size of the object + ** (given by the 3rd parameter) is never used and can be any positive + ** value. */ + sqlite3_result_blob(context, p, sizeof(*p), stat4Destructor); +} +static const FuncDef statInitFuncdef = { + 2+IsStat34, /* nArg */ + SQLITE_UTF8, /* funcFlags */ + 0, /* pUserData */ + 0, /* pNext */ + statInit, /* xFunc */ + 0, /* xStep */ + 0, /* xFinalize */ + "stat_init", /* zName */ + 0, /* pHash */ + 0 /* pDestructor */ +}; +#ifdef SQLITE_ENABLE_STAT4 /* -** The following group of routines make deep copies of expressions, -** expression lists, ID lists, and select statements. The copies can -** be deleted (by being passed to their respective ...Delete() routines) -** without effecting the originals. -** -** The expression list, ID, and source lists return by sqlite3ExprListDup(), -** sqlite3IdListDup(), and sqlite3SrcListDup() can not be further expanded -** by subsequent calls to sqlite*ListAppend() routines. -** -** Any tables that the SrcList might point to are not duplicated. +** pNew and pOld are both candidate non-periodic samples selected for +** the same column (pNew->iCol==pOld->iCol). Ignoring this column and +** considering only any trailing columns and the sample hash value, this +** function returns true if sample pNew is to be preferred over pOld. +** In other words, if we assume that the cardinalities of the selected +** column for pNew and pOld are equal, is pNew to be preferred over pOld. ** -** The flags parameter contains a combination of the EXPRDUP_XXX flags. -** If the EXPRDUP_REDUCE flag is set, then the structure returned is a -** truncated version of the usual Expr structure that will be stored as -** part of the in-memory representation of the database schema. +** This function assumes that for each argument sample, the contents of +** the anEq[] array from pSample->anEq[pSample->iCol+1] onwards are valid. */ -SQLITE_PRIVATE Expr *sqlite3ExprDup(sqlite3 *db, Expr *p, int flags){ - return exprDup(db, p, flags, 0); -} -SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3 *db, ExprList *p, int flags){ - ExprList *pNew; - struct ExprList_item *pItem, *pOldItem; +static int sampleIsBetterPost( + Stat4Accum *pAccum, + Stat4Sample *pNew, + Stat4Sample *pOld +){ + int nCol = pAccum->nCol; int i; - if( p==0 ) return 0; - pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) ); - if( pNew==0 ) return 0; - pNew->iECursor = 0; - pNew->nExpr = pNew->nAlloc = p->nExpr; - pNew->a = pItem = sqlite3DbMallocRaw(db, p->nExpr*sizeof(p->a[0]) ); - if( pItem==0 ){ - sqlite3DbFree(db, pNew); - return 0; - } - pOldItem = p->a; - for(i=0; inExpr; i++, pItem++, pOldItem++){ - Expr *pOldExpr = pOldItem->pExpr; - pItem->pExpr = sqlite3ExprDup(db, pOldExpr, flags); - pItem->zName = sqlite3DbStrDup(db, pOldItem->zName); - pItem->zSpan = sqlite3DbStrDup(db, pOldItem->zSpan); - pItem->sortOrder = pOldItem->sortOrder; - pItem->done = 0; - pItem->iCol = pOldItem->iCol; - pItem->iAlias = pOldItem->iAlias; + assert( pNew->iCol==pOld->iCol ); + for(i=pNew->iCol+1; ianEq[i]>pOld->anEq[i] ) return 1; + if( pNew->anEq[i]anEq[i] ) return 0; } - return pNew; + if( pNew->iHash>pOld->iHash ) return 1; + return 0; } +#endif +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 /* -** If cursors, triggers, views and subqueries are all omitted from -** the build, then none of the following routines, except for -** sqlite3SelectDup(), can be called. sqlite3SelectDup() is sometimes -** called with a NULL argument. -*/ -#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER) \ - || !defined(SQLITE_OMIT_SUBQUERY) -SQLITE_PRIVATE SrcList *sqlite3SrcListDup(sqlite3 *db, SrcList *p, int flags){ - SrcList *pNew; - int i; - int nByte; - if( p==0 ) return 0; - nByte = sizeof(*p) + (p->nSrc>0 ? sizeof(p->a[0]) * (p->nSrc-1) : 0); - pNew = sqlite3DbMallocRaw(db, nByte ); - if( pNew==0 ) return 0; - pNew->nSrc = pNew->nAlloc = p->nSrc; - for(i=0; inSrc; i++){ - struct SrcList_item *pNewItem = &pNew->a[i]; - struct SrcList_item *pOldItem = &p->a[i]; - Table *pTab; - pNewItem->zDatabase = sqlite3DbStrDup(db, pOldItem->zDatabase); - pNewItem->zName = sqlite3DbStrDup(db, pOldItem->zName); - pNewItem->zAlias = sqlite3DbStrDup(db, pOldItem->zAlias); - pNewItem->jointype = pOldItem->jointype; - pNewItem->iCursor = pOldItem->iCursor; - pNewItem->isPopulated = pOldItem->isPopulated; - pNewItem->zIndex = sqlite3DbStrDup(db, pOldItem->zIndex); - pNewItem->notIndexed = pOldItem->notIndexed; - pNewItem->pIndex = pOldItem->pIndex; - pTab = pNewItem->pTab = pOldItem->pTab; - if( pTab ){ - pTab->nRef++; - } - pNewItem->pSelect = sqlite3SelectDup(db, pOldItem->pSelect, flags); - pNewItem->pOn = sqlite3ExprDup(db, pOldItem->pOn, flags); - pNewItem->pUsing = sqlite3IdListDup(db, pOldItem->pUsing); - pNewItem->colUsed = pOldItem->colUsed; +** Return true if pNew is to be preferred over pOld. +** +** This function assumes that for each argument sample, the contents of +** the anEq[] array from pSample->anEq[pSample->iCol] onwards are valid. +*/ +static int sampleIsBetter( + Stat4Accum *pAccum, + Stat4Sample *pNew, + Stat4Sample *pOld +){ + tRowcnt nEqNew = pNew->anEq[pNew->iCol]; + tRowcnt nEqOld = pOld->anEq[pOld->iCol]; + + assert( pOld->isPSample==0 && pNew->isPSample==0 ); + assert( IsStat4 || (pNew->iCol==0 && pOld->iCol==0) ); + + if( (nEqNew>nEqOld) ) return 1; +#ifdef SQLITE_ENABLE_STAT4 + if( nEqNew==nEqOld ){ + if( pNew->iColiCol ) return 1; + return (pNew->iCol==pOld->iCol && sampleIsBetterPost(pAccum, pNew, pOld)); } - return pNew; + return 0; +#else + return (nEqNew==nEqOld && pNew->iHash>pOld->iHash); +#endif } -SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3 *db, IdList *p){ - IdList *pNew; + +/* +** Copy the contents of sample *pNew into the p->a[] array. If necessary, +** remove the least desirable sample from p->a[] to make room. +*/ +static void sampleInsert(Stat4Accum *p, Stat4Sample *pNew, int nEqZero){ + Stat4Sample *pSample = 0; int i; - if( p==0 ) return 0; - pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) ); - if( pNew==0 ) return 0; - pNew->nId = pNew->nAlloc = p->nId; - pNew->a = sqlite3DbMallocRaw(db, p->nId*sizeof(p->a[0]) ); - if( pNew->a==0 ){ - sqlite3DbFree(db, pNew); - return 0; + + assert( IsStat4 || nEqZero==0 ); + +#ifdef SQLITE_ENABLE_STAT4 + if( pNew->isPSample==0 ){ + Stat4Sample *pUpgrade = 0; + assert( pNew->anEq[pNew->iCol]>0 ); + + /* This sample is being added because the prefix that ends in column + ** iCol occurs many times in the table. However, if we have already + ** added a sample that shares this prefix, there is no need to add + ** this one. Instead, upgrade the priority of the highest priority + ** existing sample that shares this prefix. */ + for(i=p->nSample-1; i>=0; i--){ + Stat4Sample *pOld = &p->a[i]; + if( pOld->anEq[pNew->iCol]==0 ){ + if( pOld->isPSample ) return; + assert( pOld->iCol>pNew->iCol ); + assert( sampleIsBetter(p, pNew, pOld) ); + if( pUpgrade==0 || sampleIsBetter(p, pOld, pUpgrade) ){ + pUpgrade = pOld; + } + } + } + if( pUpgrade ){ + pUpgrade->iCol = pNew->iCol; + pUpgrade->anEq[pUpgrade->iCol] = pNew->anEq[pUpgrade->iCol]; + goto find_new_min; + } } - for(i=0; inId; i++){ - struct IdList_item *pNewItem = &pNew->a[i]; - struct IdList_item *pOldItem = &p->a[i]; - pNewItem->zName = sqlite3DbStrDup(db, pOldItem->zName); - pNewItem->idx = pOldItem->idx; +#endif + + /* If necessary, remove sample iMin to make room for the new sample. */ + if( p->nSample>=p->mxSample ){ + Stat4Sample *pMin = &p->a[p->iMin]; + tRowcnt *anEq = pMin->anEq; + tRowcnt *anLt = pMin->anLt; + tRowcnt *anDLt = pMin->anDLt; + sampleClear(p->db, pMin); + memmove(pMin, &pMin[1], sizeof(p->a[0])*(p->nSample-p->iMin-1)); + pSample = &p->a[p->nSample-1]; + pSample->nRowid = 0; + pSample->anEq = anEq; + pSample->anDLt = anDLt; + pSample->anLt = anLt; + p->nSample = p->mxSample-1; } - return pNew; -} -SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){ - Select *pNew; - if( p==0 ) return 0; - pNew = sqlite3DbMallocRaw(db, sizeof(*p) ); - if( pNew==0 ) return 0; - pNew->pEList = sqlite3ExprListDup(db, p->pEList, flags); - pNew->pSrc = sqlite3SrcListDup(db, p->pSrc, flags); - pNew->pWhere = sqlite3ExprDup(db, p->pWhere, flags); - pNew->pGroupBy = sqlite3ExprListDup(db, p->pGroupBy, flags); - pNew->pHaving = sqlite3ExprDup(db, p->pHaving, flags); - pNew->pOrderBy = sqlite3ExprListDup(db, p->pOrderBy, flags); - pNew->op = p->op; - pNew->pPrior = sqlite3SelectDup(db, p->pPrior, flags); - pNew->pLimit = sqlite3ExprDup(db, p->pLimit, flags); - pNew->pOffset = sqlite3ExprDup(db, p->pOffset, flags); - pNew->iLimit = 0; - pNew->iOffset = 0; - pNew->selFlags = p->selFlags & ~SF_UsesEphemeral; - pNew->pRightmost = 0; - pNew->addrOpenEphm[0] = -1; - pNew->addrOpenEphm[1] = -1; - pNew->addrOpenEphm[2] = -1; - return pNew; -} -#else -SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){ - assert( p==0 ); - return 0; -} + + /* The "rows less-than" for the rowid column must be greater than that + ** for the last sample in the p->a[] array. Otherwise, the samples would + ** be out of order. */ +#ifdef SQLITE_ENABLE_STAT4 + assert( p->nSample==0 + || pNew->anLt[p->nCol-1] > p->a[p->nSample-1].anLt[p->nCol-1] ); #endif + /* Insert the new sample */ + pSample = &p->a[p->nSample]; + sampleCopy(p, pSample, pNew); + p->nSample++; + + /* Zero the first nEqZero entries in the anEq[] array. */ + memset(pSample->anEq, 0, sizeof(tRowcnt)*nEqZero); + +#ifdef SQLITE_ENABLE_STAT4 + find_new_min: +#endif + if( p->nSample>=p->mxSample ){ + int iMin = -1; + for(i=0; imxSample; i++){ + if( p->a[i].isPSample ) continue; + if( iMin<0 || sampleIsBetter(p, &p->a[iMin], &p->a[i]) ){ + iMin = i; + } + } + assert( iMin>=0 ); + p->iMin = iMin; + } +} +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ /* -** Add a new element to the end of an expression list. If pList is -** initially NULL, then create a new expression list. -** -** If a memory allocation error occurs, the entire list is freed and -** NULL is returned. If non-NULL is returned, then it is guaranteed -** that the new entry was successfully appended. +** Field iChng of the index being scanned has changed. So at this point +** p->current contains a sample that reflects the previous row of the +** index. The value of anEq[iChng] and subsequent anEq[] elements are +** correct at this point. */ -SQLITE_PRIVATE ExprList *sqlite3ExprListAppend( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* List to which to append. Might be NULL */ - Expr *pExpr /* Expression to be appended. Might be NULL */ -){ - sqlite3 *db = pParse->db; - if( pList==0 ){ - pList = sqlite3DbMallocZero(db, sizeof(ExprList) ); - if( pList==0 ){ - goto no_mem; +static void samplePushPrevious(Stat4Accum *p, int iChng){ +#ifdef SQLITE_ENABLE_STAT4 + int i; + + /* Check if any samples from the aBest[] array should be pushed + ** into IndexSample.a[] at this point. */ + for(i=(p->nCol-2); i>=iChng; i--){ + Stat4Sample *pBest = &p->aBest[i]; + pBest->anEq[i] = p->current.anEq[i]; + if( p->nSamplemxSample || sampleIsBetter(p, pBest, &p->a[p->iMin]) ){ + sampleInsert(p, pBest, i); } - assert( pList->nAlloc==0 ); } - if( pList->nAlloc<=pList->nExpr ){ - struct ExprList_item *a; - int n = pList->nAlloc*2 + 4; - a = sqlite3DbRealloc(db, pList->a, n*sizeof(pList->a[0])); - if( a==0 ){ - goto no_mem; + + /* Update the anEq[] fields of any samples already collected. */ + for(i=p->nSample-1; i>=0; i--){ + int j; + for(j=iChng; jnCol; j++){ + if( p->a[i].anEq[j]==0 ) p->a[i].anEq[j] = p->current.anEq[j]; } - pList->a = a; - pList->nAlloc = sqlite3DbMallocSize(db, a)/sizeof(a[0]); } - assert( pList->a!=0 ); - if( 1 ){ - struct ExprList_item *pItem = &pList->a[pList->nExpr++]; - memset(pItem, 0, sizeof(*pItem)); - pItem->pExpr = pExpr; +#endif + +#if defined(SQLITE_ENABLE_STAT3) && !defined(SQLITE_ENABLE_STAT4) + if( iChng==0 ){ + tRowcnt nLt = p->current.anLt[0]; + tRowcnt nEq = p->current.anEq[0]; + + /* Check if this is to be a periodic sample. If so, add it. */ + if( (nLt/p->nPSample)!=(nLt+nEq)/p->nPSample ){ + p->current.isPSample = 1; + sampleInsert(p, &p->current, 0); + p->current.isPSample = 0; + }else + + /* Or if it is a non-periodic sample. Add it in this case too. */ + if( p->nSamplemxSample + || sampleIsBetter(p, &p->current, &p->a[p->iMin]) + ){ + sampleInsert(p, &p->current, 0); + } } - return pList; +#endif -no_mem: - /* Avoid leaking memory if malloc has failed. */ - sqlite3ExprDelete(db, pExpr); - sqlite3ExprListDelete(db, pList); - return 0; +#ifndef SQLITE_ENABLE_STAT3_OR_STAT4 + UNUSED_PARAMETER( p ); + UNUSED_PARAMETER( iChng ); +#endif } /* -** Set the ExprList.a[].zName element of the most recently added item -** on the expression list. +** Implementation of the stat_push SQL function: stat_push(P,C,R) +** Arguments: ** -** pList might be NULL following an OOM error. But pName should never be -** NULL. If a memory allocation fails, the pParse->db->mallocFailed flag -** is set. +** P Pointer to the Stat4Accum object created by stat_init() +** C Index of left-most column to differ from previous row +** R Rowid for the current row. Might be a key record for +** WITHOUT ROWID tables. +** +** This SQL function always returns NULL. It's purpose it to accumulate +** statistical data and/or samples in the Stat4Accum object about the +** index being analyzed. The stat_get() SQL function will later be used to +** extract relevant information for constructing the sqlite_statN tables. +** +** The R parameter is only used for STAT3 and STAT4 */ -SQLITE_PRIVATE void sqlite3ExprListSetName( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* List to which to add the span. */ - Token *pName, /* Name to be added */ - int dequote /* True to cause the name to be dequoted */ +static void statPush( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - assert( pList!=0 || pParse->db->mallocFailed!=0 ); - if( pList ){ - struct ExprList_item *pItem; - assert( pList->nExpr>0 ); - pItem = &pList->a[pList->nExpr-1]; - assert( pItem->zName==0 ); - pItem->zName = sqlite3DbStrNDup(pParse->db, pName->z, pName->n); - if( dequote && pItem->zName ) sqlite3Dequote(pItem->zName); + int i; + + /* The three function arguments */ + Stat4Accum *p = (Stat4Accum*)sqlite3_value_blob(argv[0]); + int iChng = sqlite3_value_int(argv[1]); + + UNUSED_PARAMETER( argc ); + UNUSED_PARAMETER( context ); + assert( p->nCol>0 ); + assert( iChngnCol ); + + if( p->nRow==0 ){ + /* This is the first call to this function. Do initialization. */ + for(i=0; inCol; i++) p->current.anEq[i] = 1; + }else{ + /* Second and subsequent calls get processed here */ + samplePushPrevious(p, iChng); + + /* Update anDLt[], anLt[] and anEq[] to reflect the values that apply + ** to the current row of the index. */ + for(i=0; icurrent.anEq[i]++; + } + for(i=iChng; inCol; i++){ + p->current.anDLt[i]++; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + p->current.anLt[i] += p->current.anEq[i]; +#endif + p->current.anEq[i] = 1; + } + } + p->nRow++; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( sqlite3_value_type(argv[2])==SQLITE_INTEGER ){ + sampleSetRowidInt64(p->db, &p->current, sqlite3_value_int64(argv[2])); + }else{ + sampleSetRowid(p->db, &p->current, sqlite3_value_bytes(argv[2]), + sqlite3_value_blob(argv[2])); + } + p->current.iHash = p->iPrn = p->iPrn*1103515245 + 12345; +#endif + +#ifdef SQLITE_ENABLE_STAT4 + { + tRowcnt nLt = p->current.anLt[p->nCol-1]; + + /* Check if this is to be a periodic sample. If so, add it. */ + if( (nLt/p->nPSample)!=(nLt+1)/p->nPSample ){ + p->current.isPSample = 1; + p->current.iCol = 0; + sampleInsert(p, &p->current, p->nCol-1); + p->current.isPSample = 0; + } + + /* Update the aBest[] array. */ + for(i=0; i<(p->nCol-1); i++){ + p->current.iCol = i; + if( i>=iChng || sampleIsBetterPost(p, &p->current, &p->aBest[i]) ){ + sampleCopy(p, &p->aBest[i], &p->current); + } + } } +#endif } +static const FuncDef statPushFuncdef = { + 2+IsStat34, /* nArg */ + SQLITE_UTF8, /* funcFlags */ + 0, /* pUserData */ + 0, /* pNext */ + statPush, /* xFunc */ + 0, /* xStep */ + 0, /* xFinalize */ + "stat_push", /* zName */ + 0, /* pHash */ + 0 /* pDestructor */ +}; + +#define STAT_GET_STAT1 0 /* "stat" column of stat1 table */ +#define STAT_GET_ROWID 1 /* "rowid" column of stat[34] entry */ +#define STAT_GET_NEQ 2 /* "neq" column of stat[34] entry */ +#define STAT_GET_NLT 3 /* "nlt" column of stat[34] entry */ +#define STAT_GET_NDLT 4 /* "ndlt" column of stat[34] entry */ /* -** Set the ExprList.a[].zSpan element of the most recently added item -** on the expression list. +** Implementation of the stat_get(P,J) SQL function. This routine is +** used to query statistical information that has been gathered into +** the Stat4Accum object by prior calls to stat_push(). The P parameter +** has type BLOB but it is really just a pointer to the Stat4Accum object. +** The content to returned is determined by the parameter J +** which is one of the STAT_GET_xxxx values defined above. ** -** pList might be NULL following an OOM error. But pSpan should never be -** NULL. If a memory allocation fails, the pParse->db->mallocFailed flag -** is set. +** If neither STAT3 nor STAT4 are enabled, then J is always +** STAT_GET_STAT1 and is hence omitted and this routine becomes +** a one-parameter function, stat_get(P), that always returns the +** stat1 table entry information. */ -SQLITE_PRIVATE void sqlite3ExprListSetSpan( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* List to which to add the span. */ - ExprSpan *pSpan /* The span to be added */ +static void statGet( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - sqlite3 *db = pParse->db; - assert( pList!=0 || db->mallocFailed!=0 ); - if( pList ){ - struct ExprList_item *pItem = &pList->a[pList->nExpr-1]; - assert( pList->nExpr>0 ); - assert( db->mallocFailed || pItem->pExpr==pSpan->pExpr ); - sqlite3DbFree(db, pItem->zSpan); - pItem->zSpan = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); + Stat4Accum *p = (Stat4Accum*)sqlite3_value_blob(argv[0]); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + /* STAT3 and STAT4 have a parameter on this routine. */ + int eCall = sqlite3_value_int(argv[1]); + assert( argc==2 ); + assert( eCall==STAT_GET_STAT1 || eCall==STAT_GET_NEQ + || eCall==STAT_GET_ROWID || eCall==STAT_GET_NLT + || eCall==STAT_GET_NDLT + ); + if( eCall==STAT_GET_STAT1 ) +#else + assert( argc==1 ); +#endif + { + /* Return the value to store in the "stat" column of the sqlite_stat1 + ** table for this index. + ** + ** The value is a string composed of a list of integers describing + ** the index. The first integer in the list is the total number of + ** entries in the index. There is one additional integer in the list + ** for each indexed column. This additional integer is an estimate of + ** the number of rows matched by a stabbing query on the index using + ** a key with the corresponding number of fields. In other words, + ** if the index is on columns (a,b) and the sqlite_stat1 value is + ** "100 10 2", then SQLite estimates that: + ** + ** * the index contains 100 rows, + ** * "WHERE a=?" matches 10 rows, and + ** * "WHERE a=? AND b=?" matches 2 rows. + ** + ** If D is the count of distinct values and K is the total number of + ** rows, then each estimate is computed as: + ** + ** I = (K+D-1)/D + */ + char *z; + int i; + + char *zRet = sqlite3MallocZero( (p->nKeyCol+1)*25 ); + if( zRet==0 ){ + sqlite3_result_error_nomem(context); + return; + } + + sqlite3_snprintf(24, zRet, "%llu", (u64)p->nRow); + z = zRet + sqlite3Strlen30(zRet); + for(i=0; inKeyCol; i++){ + u64 nDistinct = p->current.anDLt[i] + 1; + u64 iVal = (p->nRow + nDistinct - 1) / nDistinct; + sqlite3_snprintf(24, z, " %llu", iVal); + z += sqlite3Strlen30(z); + assert( p->current.anEq[i] ); + } + assert( z[0]=='\0' && z>zRet ); + + sqlite3_result_text(context, zRet, -1, sqlite3_free); + } +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + else if( eCall==STAT_GET_ROWID ){ + if( p->iGet<0 ){ + samplePushPrevious(p, 0); + p->iGet = 0; + } + if( p->iGetnSample ){ + Stat4Sample *pS = p->a + p->iGet; + if( pS->nRowid==0 ){ + sqlite3_result_int64(context, pS->u.iRowid); + }else{ + sqlite3_result_blob(context, pS->u.aRowid, pS->nRowid, + SQLITE_TRANSIENT); + } + } + }else{ + tRowcnt *aCnt = 0; + + assert( p->iGetnSample ); + switch( eCall ){ + case STAT_GET_NEQ: aCnt = p->a[p->iGet].anEq; break; + case STAT_GET_NLT: aCnt = p->a[p->iGet].anLt; break; + default: { + aCnt = p->a[p->iGet].anDLt; + p->iGet++; + break; + } + } + + if( IsStat3 ){ + sqlite3_result_int64(context, (i64)aCnt[0]); + }else{ + char *zRet = sqlite3MallocZero(p->nCol * 25); + if( zRet==0 ){ + sqlite3_result_error_nomem(context); + }else{ + int i; + char *z = zRet; + for(i=0; inCol; i++){ + sqlite3_snprintf(24, z, "%llu ", (u64)aCnt[i]); + z += sqlite3Strlen30(z); + } + assert( z[0]=='\0' && z>zRet ); + z[-1] = '\0'; + sqlite3_result_text(context, zRet, -1, sqlite3_free); + } + } } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ +#ifndef SQLITE_DEBUG + UNUSED_PARAMETER( argc ); +#endif +} +static const FuncDef statGetFuncdef = { + 1+IsStat34, /* nArg */ + SQLITE_UTF8, /* funcFlags */ + 0, /* pUserData */ + 0, /* pNext */ + statGet, /* xFunc */ + 0, /* xStep */ + 0, /* xFinalize */ + "stat_get", /* zName */ + 0, /* pHash */ + 0 /* pDestructor */ +}; + +static void callStatGet(Vdbe *v, int regStat4, int iParam, int regOut){ + assert( regOut!=regStat4 && regOut!=regStat4+1 ); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3VdbeAddOp2(v, OP_Integer, iParam, regStat4+1); +#elif SQLITE_DEBUG + assert( iParam==STAT_GET_STAT1 ); +#else + UNUSED_PARAMETER( iParam ); +#endif + sqlite3VdbeAddOp3(v, OP_Function, 0, regStat4, regOut); + sqlite3VdbeChangeP4(v, -1, (char*)&statGetFuncdef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, 1 + IsStat34); } /* -** If the expression list pEList contains more than iLimit elements, -** leave an error message in pParse. +** Generate code to do an analysis of all indices associated with +** a single table. */ -SQLITE_PRIVATE void sqlite3ExprListCheckLength( - Parse *pParse, - ExprList *pEList, - const char *zObject +static void analyzeOneTable( + Parse *pParse, /* Parser context */ + Table *pTab, /* Table whose indices are to be analyzed */ + Index *pOnlyIdx, /* If not NULL, only analyze this one index */ + int iStatCur, /* Index of VdbeCursor that writes the sqlite_stat1 table */ + int iMem, /* Available memory locations begin here */ + int iTab /* Next available cursor */ ){ - int mx = pParse->db->aLimit[SQLITE_LIMIT_COLUMN]; - testcase( pEList && pEList->nExpr==mx ); - testcase( pEList && pEList->nExpr==mx+1 ); - if( pEList && pEList->nExpr>mx ){ - sqlite3ErrorMsg(pParse, "too many columns in %s", zObject); + sqlite3 *db = pParse->db; /* Database handle */ + Index *pIdx; /* An index to being analyzed */ + int iIdxCur; /* Cursor open on index being analyzed */ + int iTabCur; /* Table cursor */ + Vdbe *v; /* The virtual machine being built up */ + int i; /* Loop counter */ + int jZeroRows = -1; /* Jump from here if number of rows is zero */ + int iDb; /* Index of database containing pTab */ + u8 needTableCnt = 1; /* True to count the table */ + int regNewRowid = iMem++; /* Rowid for the inserted record */ + int regStat4 = iMem++; /* Register to hold Stat4Accum object */ + int regChng = iMem++; /* Index of changed index field */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + int regRowid = iMem++; /* Rowid argument passed to stat_push() */ +#endif + int regTemp = iMem++; /* Temporary use register */ + int regTabname = iMem++; /* Register containing table name */ + int regIdxname = iMem++; /* Register containing index name */ + int regStat1 = iMem++; /* Value for the stat column of sqlite_stat1 */ + int regPrev = iMem; /* MUST BE LAST (see below) */ + + pParse->nMem = MAX(pParse->nMem, iMem); + v = sqlite3GetVdbe(pParse); + if( v==0 || NEVER(pTab==0) ){ + return; + } + if( pTab->tnum==0 ){ + /* Do not gather statistics on views or virtual tables */ + return; + } + if( sqlite3_strnicmp(pTab->zName, "sqlite_", 7)==0 ){ + /* Do not gather statistics on system tables */ + return; + } + assert( sqlite3BtreeHoldsAllMutexes(db) ); + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + assert( iDb>=0 ); + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); +#ifndef SQLITE_OMIT_AUTHORIZATION + if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0, + db->aDb[iDb].zName ) ){ + return; + } +#endif + + /* Establish a read-lock on the table at the shared-cache level. + ** Open a read-only cursor on the table. Also allocate a cursor number + ** to use for scanning indexes (iIdxCur). No index cursor is opened at + ** this time though. */ + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + iTabCur = iTab++; + iIdxCur = iTab++; + pParse->nTab = MAX(pParse->nTab, iTab); + sqlite3OpenTable(pParse, iTabCur, iDb, pTab, OP_OpenRead); + sqlite3VdbeAddOp4(v, OP_String8, 0, regTabname, 0, pTab->zName, 0); + + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int nCol; /* Number of columns in pIdx. "N" */ + int addrRewind; /* Address of "OP_Rewind iIdxCur" */ + int addrNextRow; /* Address of "next_row:" */ + const char *zIdxName; /* Name of the index */ + int nColTest; /* Number of columns to test for changes */ + + if( pOnlyIdx && pOnlyIdx!=pIdx ) continue; + if( pIdx->pPartIdxWhere==0 ) needTableCnt = 0; + if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIdx) ){ + nCol = pIdx->nKeyCol; + zIdxName = pTab->zName; + nColTest = nCol - 1; + }else{ + nCol = pIdx->nColumn; + zIdxName = pIdx->zName; + nColTest = pIdx->uniqNotNull ? pIdx->nKeyCol-1 : nCol-1; + } + + /* Populate the register containing the index name. */ + sqlite3VdbeAddOp4(v, OP_String8, 0, regIdxname, 0, zIdxName, 0); + VdbeComment((v, "Analysis for %s.%s", pTab->zName, zIdxName)); + + /* + ** Pseudo-code for loop that calls stat_push(): + ** + ** Rewind csr + ** if eof(csr) goto end_of_scan; + ** regChng = 0 + ** goto chng_addr_0; + ** + ** next_row: + ** regChng = 0 + ** if( idx(0) != regPrev(0) ) goto chng_addr_0 + ** regChng = 1 + ** if( idx(1) != regPrev(1) ) goto chng_addr_1 + ** ... + ** regChng = N + ** goto chng_addr_N + ** + ** chng_addr_0: + ** regPrev(0) = idx(0) + ** chng_addr_1: + ** regPrev(1) = idx(1) + ** ... + ** + ** endDistinctTest: + ** regRowid = idx(rowid) + ** stat_push(P, regChng, regRowid) + ** Next csr + ** if !eof(csr) goto next_row; + ** + ** end_of_scan: + */ + + /* Make sure there are enough memory cells allocated to accommodate + ** the regPrev array and a trailing rowid (the rowid slot is required + ** when building a record to insert into the sample column of + ** the sqlite_stat4 table. */ + pParse->nMem = MAX(pParse->nMem, regPrev+nColTest); + + /* Open a read-only cursor on the index being analyzed. */ + assert( iDb==sqlite3SchemaToIndex(db, pIdx->pSchema) ); + sqlite3VdbeAddOp3(v, OP_OpenRead, iIdxCur, pIdx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); + VdbeComment((v, "%s", pIdx->zName)); + + /* Invoke the stat_init() function. The arguments are: + ** + ** (1) the number of columns in the index including the rowid + ** (or for a WITHOUT ROWID table, the number of PK columns), + ** (2) the number of columns in the key without the rowid/pk + ** (3) the number of rows in the index, + ** + ** + ** The third argument is only used for STAT3 and STAT4 + */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regStat4+3); +#endif + sqlite3VdbeAddOp2(v, OP_Integer, nCol, regStat4+1); + sqlite3VdbeAddOp2(v, OP_Integer, pIdx->nKeyCol, regStat4+2); + sqlite3VdbeAddOp3(v, OP_Function, 0, regStat4+1, regStat4); + sqlite3VdbeChangeP4(v, -1, (char*)&statInitFuncdef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, 2+IsStat34); + + /* Implementation of the following: + ** + ** Rewind csr + ** if eof(csr) goto end_of_scan; + ** regChng = 0 + ** goto next_push_0; + ** + */ + addrRewind = sqlite3VdbeAddOp1(v, OP_Rewind, iIdxCur); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Integer, 0, regChng); + addrNextRow = sqlite3VdbeCurrentAddr(v); + + if( nColTest>0 ){ + int endDistinctTest = sqlite3VdbeMakeLabel(v); + int *aGotoChng; /* Array of jump instruction addresses */ + aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*nColTest); + if( aGotoChng==0 ) continue; + + /* + ** next_row: + ** regChng = 0 + ** if( idx(0) != regPrev(0) ) goto chng_addr_0 + ** regChng = 1 + ** if( idx(1) != regPrev(1) ) goto chng_addr_1 + ** ... + ** regChng = N + ** goto endDistinctTest + */ + sqlite3VdbeAddOp0(v, OP_Goto); + addrNextRow = sqlite3VdbeCurrentAddr(v); + if( nColTest==1 && pIdx->nKeyCol==1 && IsUniqueIndex(pIdx) ){ + /* For a single-column UNIQUE index, once we have found a non-NULL + ** row, we know that all the rest will be distinct, so skip + ** subsequent distinctness tests. */ + sqlite3VdbeAddOp2(v, OP_NotNull, regPrev, endDistinctTest); + VdbeCoverage(v); + } + for(i=0; iazColl[i]); + sqlite3VdbeAddOp2(v, OP_Integer, i, regChng); + sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regTemp); + aGotoChng[i] = + sqlite3VdbeAddOp4(v, OP_Ne, regTemp, 0, regPrev+i, pColl, P4_COLLSEQ); + sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); + VdbeCoverage(v); + } + sqlite3VdbeAddOp2(v, OP_Integer, nColTest, regChng); + sqlite3VdbeAddOp2(v, OP_Goto, 0, endDistinctTest); + + + /* + ** chng_addr_0: + ** regPrev(0) = idx(0) + ** chng_addr_1: + ** regPrev(1) = idx(1) + ** ... + */ + sqlite3VdbeJumpHere(v, addrNextRow-1); + for(i=0; ipTable); + int j, k, regKey; + regKey = sqlite3GetTempRange(pParse, pPk->nKeyCol); + for(j=0; jnKeyCol; j++){ + k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[j]); + sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, k, regKey+j); + VdbeComment((v, "%s", pTab->aCol[pPk->aiColumn[j]].zName)); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regKey, pPk->nKeyCol, regRowid); + sqlite3ReleaseTempRange(pParse, regKey, pPk->nKeyCol); + } +#endif + assert( regChng==(regStat4+1) ); + sqlite3VdbeAddOp3(v, OP_Function, 1, regStat4, regTemp); + sqlite3VdbeChangeP4(v, -1, (char*)&statPushFuncdef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, 2+IsStat34); + sqlite3VdbeAddOp2(v, OP_Next, iIdxCur, addrNextRow); VdbeCoverage(v); + + /* Add the entry to the stat1 table. */ + callStatGet(v, regStat4, STAT_GET_STAT1, regStat1); + assert( "BBB"[0]==SQLITE_AFF_TEXT ); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0); + sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); + sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + + /* Add the entries to the stat3 or stat4 table. */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + { + int regEq = regStat1; + int regLt = regStat1+1; + int regDLt = regStat1+2; + int regSample = regStat1+3; + int regCol = regStat1+4; + int regSampleRowid = regCol + nCol; + int addrNext; + int addrIsNull; + u8 seekOp = HasRowid(pTab) ? OP_NotExists : OP_NotFound; + + pParse->nMem = MAX(pParse->nMem, regCol+nCol); + + addrNext = sqlite3VdbeCurrentAddr(v); + callStatGet(v, regStat4, STAT_GET_ROWID, regSampleRowid); + addrIsNull = sqlite3VdbeAddOp1(v, OP_IsNull, regSampleRowid); + VdbeCoverage(v); + callStatGet(v, regStat4, STAT_GET_NEQ, regEq); + callStatGet(v, regStat4, STAT_GET_NLT, regLt); + callStatGet(v, regStat4, STAT_GET_NDLT, regDLt); + sqlite3VdbeAddOp4Int(v, seekOp, iTabCur, addrNext, regSampleRowid, 0); + /* We know that the regSampleRowid row exists because it was read by + ** the previous loop. Thus the not-found jump of seekOp will never + ** be taken */ + VdbeCoverageNeverTaken(v); +#ifdef SQLITE_ENABLE_STAT3 + sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur, + pIdx->aiColumn[0], regSample); +#else + for(i=0; iaiColumn[i]; + sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur, iCol, regCol+i); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regCol, nCol, regSample); +#endif + sqlite3VdbeAddOp3(v, OP_MakeRecord, regTabname, 6, regTemp); + sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur+1, regNewRowid); + sqlite3VdbeAddOp3(v, OP_Insert, iStatCur+1, regTemp, regNewRowid); + sqlite3VdbeAddOp2(v, OP_Goto, 1, addrNext); /* P1==1 for end-of-loop */ + sqlite3VdbeJumpHere(v, addrIsNull); + } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ + + /* End of analysis */ + sqlite3VdbeJumpHere(v, addrRewind); + } + + + /* Create a single sqlite_stat1 entry containing NULL as the index + ** name and the row count as the content. + */ + if( pOnlyIdx==0 && needTableCnt ){ + VdbeComment((v, "%s", pTab->zName)); + sqlite3VdbeAddOp2(v, OP_Count, iTabCur, regStat1); + jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, regStat1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Null, 0, regIdxname); + assert( "BBB"[0]==SQLITE_AFF_TEXT ); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0); + sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); + sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3VdbeJumpHere(v, jZeroRows); } } + /* -** Delete an entire expression list. +** Generate code that will cause the most recent index analysis to +** be loaded into internal hash tables where is can be used. */ -SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){ - int i; - struct ExprList_item *pItem; - if( pList==0 ) return; - assert( pList->a!=0 || (pList->nExpr==0 && pList->nAlloc==0) ); - assert( pList->nExpr<=pList->nAlloc ); - for(pItem=pList->a, i=0; inExpr; i++, pItem++){ - sqlite3ExprDelete(db, pItem->pExpr); - sqlite3DbFree(db, pItem->zName); - sqlite3DbFree(db, pItem->zSpan); +static void loadAnalysis(Parse *pParse, int iDb){ + Vdbe *v = sqlite3GetVdbe(pParse); + if( v ){ + sqlite3VdbeAddOp1(v, OP_LoadAnalysis, iDb); } - sqlite3DbFree(db, pList->a); - sqlite3DbFree(db, pList); } /* -** These routines are Walker callbacks. Walker.u.pi is a pointer -** to an integer. These routines are checking an expression to see -** if it is a constant. Set *Walker.u.pi to 0 if the expression is -** not constant. -** -** These callback routines are used to implement the following: -** -** sqlite3ExprIsConstant() -** sqlite3ExprIsConstantNotJoin() -** sqlite3ExprIsConstantOrFunction() -** +** Generate code that will do an analysis of an entire database */ -static int exprNodeIsConstant(Walker *pWalker, Expr *pExpr){ - - /* If pWalker->u.i is 3 then any term of the expression that comes from - ** the ON or USING clauses of a join disqualifies the expression - ** from being considered constant. */ - if( pWalker->u.i==3 && ExprHasAnyProperty(pExpr, EP_FromJoin) ){ - pWalker->u.i = 0; - return WRC_Abort; - } +static void analyzeDatabase(Parse *pParse, int iDb){ + sqlite3 *db = pParse->db; + Schema *pSchema = db->aDb[iDb].pSchema; /* Schema of database iDb */ + HashElem *k; + int iStatCur; + int iMem; + int iTab; - switch( pExpr->op ){ - /* Consider functions to be constant if all their arguments are constant - ** and pWalker->u.i==2 */ - case TK_FUNCTION: - if( pWalker->u.i==2 ) return 0; - /* Fall through */ - case TK_ID: - case TK_COLUMN: - case TK_AGG_FUNCTION: - case TK_AGG_COLUMN: - testcase( pExpr->op==TK_ID ); - testcase( pExpr->op==TK_COLUMN ); - testcase( pExpr->op==TK_AGG_FUNCTION ); - testcase( pExpr->op==TK_AGG_COLUMN ); - pWalker->u.i = 0; - return WRC_Abort; - default: - testcase( pExpr->op==TK_SELECT ); /* selectNodeIsConstant will disallow */ - testcase( pExpr->op==TK_EXISTS ); /* selectNodeIsConstant will disallow */ - return WRC_Continue; + sqlite3BeginWriteOperation(pParse, 0, iDb); + iStatCur = pParse->nTab; + pParse->nTab += 3; + openStatTable(pParse, iDb, iStatCur, 0, 0); + iMem = pParse->nMem+1; + iTab = pParse->nTab; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + for(k=sqliteHashFirst(&pSchema->tblHash); k; k=sqliteHashNext(k)){ + Table *pTab = (Table*)sqliteHashData(k); + analyzeOneTable(pParse, pTab, 0, iStatCur, iMem, iTab); } -} -static int selectNodeIsConstant(Walker *pWalker, Select *NotUsed){ - UNUSED_PARAMETER(NotUsed); - pWalker->u.i = 0; - return WRC_Abort; -} -static int exprIsConst(Expr *p, int initFlag){ - Walker w; - w.u.i = initFlag; - w.xExprCallback = exprNodeIsConstant; - w.xSelectCallback = selectNodeIsConstant; - sqlite3WalkExpr(&w, p); - return w.u.i; + loadAnalysis(pParse, iDb); } /* -** Walk an expression tree. Return 1 if the expression is constant -** and 0 if it involves variables or function calls. -** -** For the purposes of this function, a double-quoted string (ex: "abc") -** is considered a variable but a single-quoted string (ex: 'abc') is -** a constant. +** Generate code that will do an analysis of a single table in +** a database. If pOnlyIdx is not NULL then it is a single index +** in pTab that should be analyzed. */ -SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr *p){ - return exprIsConst(p, 1); +static void analyzeTable(Parse *pParse, Table *pTab, Index *pOnlyIdx){ + int iDb; + int iStatCur; + + assert( pTab!=0 ); + assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); + iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + sqlite3BeginWriteOperation(pParse, 0, iDb); + iStatCur = pParse->nTab; + pParse->nTab += 3; + if( pOnlyIdx ){ + openStatTable(pParse, iDb, iStatCur, pOnlyIdx->zName, "idx"); + }else{ + openStatTable(pParse, iDb, iStatCur, pTab->zName, "tbl"); + } + analyzeOneTable(pParse, pTab, pOnlyIdx, iStatCur,pParse->nMem+1,pParse->nTab); + loadAnalysis(pParse, iDb); } /* -** Walk an expression tree. Return 1 if the expression is constant -** that does no originate from the ON or USING clauses of a join. -** Return 0 if it involves variables or function calls or terms from -** an ON or USING clause. +** Generate code for the ANALYZE command. The parser calls this routine +** when it recognizes an ANALYZE command. +** +** ANALYZE -- 1 +** ANALYZE -- 2 +** ANALYZE ?.? -- 3 +** +** Form 1 causes all indices in all attached databases to be analyzed. +** Form 2 analyzes all indices the single database named. +** Form 3 analyzes all indices associated with the named table. */ -SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr *p){ - return exprIsConst(p, 3); +SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){ + sqlite3 *db = pParse->db; + int iDb; + int i; + char *z, *zDb; + Table *pTab; + Index *pIdx; + Token *pTableName; + Vdbe *v; + + /* Read the database schema. If an error occurs, leave an error message + ** and code in pParse and return NULL. */ + assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + return; + } + + assert( pName2!=0 || pName1==0 ); + if( pName1==0 ){ + /* Form 1: Analyze everything */ + for(i=0; inDb; i++){ + if( i==1 ) continue; /* Do not analyze the TEMP database */ + analyzeDatabase(pParse, i); + } + }else if( pName2->n==0 ){ + /* Form 2: Analyze the database or table named */ + iDb = sqlite3FindDb(db, pName1); + if( iDb>=0 ){ + analyzeDatabase(pParse, iDb); + }else{ + z = sqlite3NameFromToken(db, pName1); + if( z ){ + if( (pIdx = sqlite3FindIndex(db, z, 0))!=0 ){ + analyzeTable(pParse, pIdx->pTable, pIdx); + }else if( (pTab = sqlite3LocateTable(pParse, 0, z, 0))!=0 ){ + analyzeTable(pParse, pTab, 0); + } + sqlite3DbFree(db, z); + } + } + }else{ + /* Form 3: Analyze the fully qualified table name */ + iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pTableName); + if( iDb>=0 ){ + zDb = db->aDb[iDb].zName; + z = sqlite3NameFromToken(db, pTableName); + if( z ){ + if( (pIdx = sqlite3FindIndex(db, z, zDb))!=0 ){ + analyzeTable(pParse, pIdx->pTable, pIdx); + }else if( (pTab = sqlite3LocateTable(pParse, 0, z, zDb))!=0 ){ + analyzeTable(pParse, pTab, 0); + } + sqlite3DbFree(db, z); + } + } + } + v = sqlite3GetVdbe(pParse); + if( v ) sqlite3VdbeAddOp0(v, OP_Expire); } /* -** Walk an expression tree. Return 1 if the expression is constant -** or a function call with constant arguments. Return and 0 if there -** are any variables. -** -** For the purposes of this function, a double-quoted string (ex: "abc") -** is considered a variable but a single-quoted string (ex: 'abc') is -** a constant. +** Used to pass information from the analyzer reader through to the +** callback routine. */ -SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr *p){ - return exprIsConst(p, 2); -} +typedef struct analysisInfo analysisInfo; +struct analysisInfo { + sqlite3 *db; + const char *zDatabase; +}; /* -** If the expression p codes a constant integer that is small enough -** to fit in a 32-bit integer, return 1 and put the value of the integer -** in *pValue. If the expression is not an integer or if it is too big -** to fit in a signed 32-bit integer, return 0 and leave *pValue unchanged. +** The first argument points to a nul-terminated string containing a +** list of space separated integers. Read the first nOut of these into +** the array aOut[]. */ -SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr *p, int *pValue){ - int rc = 0; - - /* If an expression is an integer literal that fits in a signed 32-bit - ** integer, then the EP_IntValue flag will have already been set */ - assert( p->op!=TK_INTEGER || (p->flags & EP_IntValue)!=0 - || sqlite3GetInt32(p->u.zToken, &rc)==0 ); +static void decodeIntArray( + char *zIntArray, /* String containing int array to decode */ + int nOut, /* Number of slots in aOut[] */ + tRowcnt *aOut, /* Store integers here */ + LogEst *aLog, /* Or, if aOut==0, here */ + Index *pIndex /* Handle extra flags for this index, if not NULL */ +){ + char *z = zIntArray; + int c; + int i; + tRowcnt v; - if( p->flags & EP_IntValue ){ - *pValue = p->u.iValue; - return 1; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( z==0 ) z = ""; +#else + assert( z!=0 ); +#endif + for(i=0; *z && i='0' && c<='9' ){ + v = v*10 + c - '0'; + z++; + } +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( aOut ) aOut[i] = v; + if( aLog ) aLog[i] = sqlite3LogEst(v); +#else + assert( aOut==0 ); + UNUSED_PARAMETER(aOut); + assert( aLog!=0 ); + aLog[i] = sqlite3LogEst(v); +#endif + if( *z==' ' ) z++; } - switch( p->op ){ - case TK_UPLUS: { - rc = sqlite3ExprIsInteger(p->pLeft, pValue); - break; +#ifndef SQLITE_ENABLE_STAT3_OR_STAT4 + assert( pIndex!=0 ); +#else + if( pIndex ) +#endif + while( z[0] ){ + if( sqlite3_strglob("unordered*", z)==0 ){ + pIndex->bUnordered = 1; + }else if( sqlite3_strglob("sz=[0-9]*", z)==0 ){ + pIndex->szIdxRow = sqlite3LogEst(sqlite3Atoi(z+3)); } - case TK_UMINUS: { - int v; - if( sqlite3ExprIsInteger(p->pLeft, &v) ){ - *pValue = -v; - rc = 1; - } - break; +#ifdef SQLITE_ENABLE_COSTMULT + else if( sqlite3_strglob("costmult=[0-9]*",z)==0 ){ + pIndex->pTable->costMult = sqlite3LogEst(sqlite3Atoi(z+9)); } - default: break; +#endif + while( z[0]!=0 && z[0]!=' ' ) z++; + while( z[0]==' ' ) z++; } - return rc; } /* -** Return FALSE if there is no chance that the expression can be NULL. +** This callback is invoked once for each index when reading the +** sqlite_stat1 table. ** -** If the expression might be NULL or if the expression is too complex -** to tell return TRUE. +** argv[0] = name of the table +** argv[1] = name of the index (might be NULL) +** argv[2] = results of analysis - on integer for each column ** -** This routine is used as an optimization, to skip OP_IsNull opcodes -** when we know that a value cannot be NULL. Hence, a false positive -** (returning TRUE when in fact the expression can never be NULL) might -** be a small performance hit but is otherwise harmless. On the other -** hand, a false negative (returning FALSE when the result could be NULL) -** will likely result in an incorrect answer. So when in doubt, return -** TRUE. +** Entries for which argv[1]==NULL simply record the number of rows in +** the table. */ -SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr *p){ - u8 op; - while( p->op==TK_UPLUS || p->op==TK_UMINUS ){ p = p->pLeft; } - op = p->op; - if( op==TK_REGISTER ) op = p->op2; - switch( op ){ - case TK_INTEGER: - case TK_STRING: - case TK_FLOAT: - case TK_BLOB: - return 0; - default: - return 1; - } -} +static int analysisLoader(void *pData, int argc, char **argv, char **NotUsed){ + analysisInfo *pInfo = (analysisInfo*)pData; + Index *pIndex; + Table *pTable; + const char *z; -/* -** Generate an OP_IsNull instruction that tests register iReg and jumps -** to location iDest if the value in iReg is NULL. The value in iReg -** was computed by pExpr. If we can look at pExpr at compile-time and -** determine that it can never generate a NULL, then the OP_IsNull operation -** can be omitted. -*/ -SQLITE_PRIVATE void sqlite3ExprCodeIsNullJump( - Vdbe *v, /* The VDBE under construction */ - const Expr *pExpr, /* Only generate OP_IsNull if this expr can be NULL */ - int iReg, /* Test the value in this register for NULL */ - int iDest /* Jump here if the value is null */ -){ - if( sqlite3ExprCanBeNull(pExpr) ){ - sqlite3VdbeAddOp2(v, OP_IsNull, iReg, iDest); + assert( argc==3 ); + UNUSED_PARAMETER2(NotUsed, argc); + + if( argv==0 || argv[0]==0 || argv[2]==0 ){ + return 0; } -} + pTable = sqlite3FindTable(pInfo->db, argv[0], pInfo->zDatabase); + if( pTable==0 ){ + return 0; + } + if( argv[1]==0 ){ + pIndex = 0; + }else if( sqlite3_stricmp(argv[0],argv[1])==0 ){ + pIndex = sqlite3PrimaryKeyIndex(pTable); + }else{ + pIndex = sqlite3FindIndex(pInfo->db, argv[1], pInfo->zDatabase); + } + z = argv[2]; -/* -** Return TRUE if the given expression is a constant which would be -** unchanged by OP_Affinity with the affinity given in the second -** argument. -** -** This routine is used to determine if the OP_Affinity operation -** can be omitted. When in doubt return FALSE. A false negative -** is harmless. A false positive, however, can result in the wrong -** answer. -*/ -SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr *p, char aff){ - u8 op; - if( aff==SQLITE_AFF_NONE ) return 1; - while( p->op==TK_UPLUS || p->op==TK_UMINUS ){ p = p->pLeft; } - op = p->op; - if( op==TK_REGISTER ) op = p->op2; - switch( op ){ - case TK_INTEGER: { - return aff==SQLITE_AFF_INTEGER || aff==SQLITE_AFF_NUMERIC; - } - case TK_FLOAT: { - return aff==SQLITE_AFF_REAL || aff==SQLITE_AFF_NUMERIC; - } - case TK_STRING: { - return aff==SQLITE_AFF_TEXT; - } - case TK_BLOB: { - return 1; - } - case TK_COLUMN: { - assert( p->iTable>=0 ); /* p cannot be part of a CHECK constraint */ - return p->iColumn<0 - && (aff==SQLITE_AFF_INTEGER || aff==SQLITE_AFF_NUMERIC); - } - default: { - return 0; - } + if( pIndex ){ + int nCol = pIndex->nKeyCol+1; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + tRowcnt * const aiRowEst = pIndex->aiRowEst = (tRowcnt*)sqlite3MallocZero( + sizeof(tRowcnt) * nCol + ); + if( aiRowEst==0 ) pInfo->db->mallocFailed = 1; +#else + tRowcnt * const aiRowEst = 0; +#endif + pIndex->bUnordered = 0; + decodeIntArray((char*)z, nCol, aiRowEst, pIndex->aiRowLogEst, pIndex); + if( pIndex->pPartIdxWhere==0 ) pTable->nRowLogEst = pIndex->aiRowLogEst[0]; + }else{ + Index fakeIdx; + fakeIdx.szIdxRow = pTable->szTabRow; +#ifdef SQLITE_ENABLE_COSTMULT + fakeIdx.pTable = pTable; +#endif + decodeIntArray((char*)z, 1, 0, &pTable->nRowLogEst, &fakeIdx); + pTable->szTabRow = fakeIdx.szIdxRow; } -} -/* -** Return TRUE if the given string is a row-id column name. -*/ -SQLITE_PRIVATE int sqlite3IsRowid(const char *z){ - if( sqlite3StrICmp(z, "_ROWID_")==0 ) return 1; - if( sqlite3StrICmp(z, "ROWID")==0 ) return 1; - if( sqlite3StrICmp(z, "OID")==0 ) return 1; return 0; } /* -** Return true if we are able to the IN operator optimization on a -** query of the form -** -** x IN (SELECT ...) -** -** Where the SELECT... clause is as specified by the parameter to this -** routine. -** -** The Select object passed in has already been preprocessed and no -** errors have been found. +** If the Index.aSample variable is not NULL, delete the aSample[] array +** and its contents. */ -#ifndef SQLITE_OMIT_SUBQUERY -static int isCandidateForInOpt(Select *p){ - SrcList *pSrc; - ExprList *pEList; - Table *pTab; - if( p==0 ) return 0; /* right-hand side of IN is SELECT */ - if( p->pPrior ) return 0; /* Not a compound SELECT */ - if( p->selFlags & (SF_Distinct|SF_Aggregate) ){ - testcase( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); - testcase( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); - return 0; /* No DISTINCT keyword and no aggregate functions */ +SQLITE_PRIVATE void sqlite3DeleteIndexSamples(sqlite3 *db, Index *pIdx){ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( pIdx->aSample ){ + int j; + for(j=0; jnSample; j++){ + IndexSample *p = &pIdx->aSample[j]; + sqlite3DbFree(db, p->p); + } + sqlite3DbFree(db, pIdx->aSample); } - assert( p->pGroupBy==0 ); /* Has no GROUP BY clause */ - if( p->pLimit ) return 0; /* Has no LIMIT clause */ - assert( p->pOffset==0 ); /* No LIMIT means no OFFSET */ - if( p->pWhere ) return 0; /* Has no WHERE clause */ - pSrc = p->pSrc; - assert( pSrc!=0 ); - if( pSrc->nSrc!=1 ) return 0; /* Single term in FROM clause */ - if( pSrc->a[0].pSelect ) return 0; /* FROM is not a subquery or view */ - pTab = pSrc->a[0].pTab; - if( NEVER(pTab==0) ) return 0; - assert( pTab->pSelect==0 ); /* FROM clause is not a view */ - if( IsVirtual(pTab) ) return 0; /* FROM clause not a virtual table */ - pEList = p->pEList; - if( pEList->nExpr!=1 ) return 0; /* One column in the result set */ - if( pEList->a[0].pExpr->op!=TK_COLUMN ) return 0; /* Result is a column */ - return 1; + if( db && db->pnBytesFreed==0 ){ + pIdx->nSample = 0; + pIdx->aSample = 0; + } +#else + UNUSED_PARAMETER(db); + UNUSED_PARAMETER(pIdx); +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ } -#endif /* SQLITE_OMIT_SUBQUERY */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 /* -** This function is used by the implementation of the IN (...) operator. -** It's job is to find or create a b-tree structure that may be used -** either to test for membership of the (...) set or to iterate through -** its members, skipping duplicates. -** -** The index of the cursor opened on the b-tree (database table, database index -** or ephermal table) is stored in pX->iTable before this function returns. -** The returned value of this function indicates the b-tree type, as follows: -** -** IN_INDEX_ROWID - The cursor was opened on a database table. -** IN_INDEX_INDEX - The cursor was opened on a database index. -** IN_INDEX_EPH - The cursor was opened on a specially created and -** populated epheremal table. -** -** An existing b-tree may only be used if the SELECT is of the simple -** form: -** -** SELECT FROM
-** -** If the prNotFound parameter is 0, then the b-tree will be used to iterate -** through the set members, skipping any duplicates. In this case an -** epheremal table must be used unless the selected is guaranteed -** to be unique - either because it is an INTEGER PRIMARY KEY or it -** has a UNIQUE constraint or UNIQUE index. -** -** If the prNotFound parameter is not 0, then the b-tree will be used -** for fast set membership tests. In this case an epheremal table must -** be used unless is an INTEGER PRIMARY KEY or an index can -** be found with as its left-most column. -** -** When the b-tree is being used for membership tests, the calling function -** needs to know whether or not the structure contains an SQL NULL -** value in order to correctly evaluate expressions like "X IN (Y, Z)". -** If there is any chance that the (...) might contain a NULL value at -** runtime, then a register is allocated and the register number written -** to *prNotFound. If there is no chance that the (...) contains a -** NULL value, then *prNotFound is left unchanged. -** -** If a register is allocated and its location stored in *prNotFound, then -** its initial value is NULL. If the (...) does not remain constant -** for the duration of the query (i.e. the SELECT within the (...) -** is a correlated subquery) then the value of the allocated register is -** reset to NULL each time the subquery is rerun. This allows the -** caller to use vdbe code equivalent to the following: -** -** if( register==NULL ){ -** has_null = -** register = 1 -** } -** -** in order to avoid running the -** test more often than is necessary. +** Populate the pIdx->aAvgEq[] array based on the samples currently +** stored in pIdx->aSample[]. */ -#ifndef SQLITE_OMIT_SUBQUERY -SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){ - Select *p; /* SELECT to the right of IN operator */ - int eType = 0; /* Type of RHS table. IN_INDEX_* */ - int iTab = pParse->nTab++; /* Cursor of the RHS table */ - int mustBeUnique = (prNotFound==0); /* True if RHS must be unique */ - - assert( pX->op==TK_IN ); - - /* Check to see if an existing table or index can be used to - ** satisfy the query. This is preferable to generating a new - ** ephemeral table. - */ - p = (ExprHasProperty(pX, EP_xIsSelect) ? pX->x.pSelect : 0); - if( ALWAYS(pParse->nErr==0) && isCandidateForInOpt(p) ){ - sqlite3 *db = pParse->db; /* Database connection */ - Expr *pExpr = p->pEList->a[0].pExpr; /* Expression */ - int iCol = pExpr->iColumn; /* Index of column */ - Vdbe *v = sqlite3GetVdbe(pParse); /* Virtual machine being coded */ - Table *pTab = p->pSrc->a[0].pTab; /* Table
. */ - int iDb; /* Database idx for pTab */ - - /* Code an OP_VerifyCookie and OP_TableLock for
. */ - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - sqlite3CodeVerifySchema(pParse, iDb); - sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); - - /* This function is only called from two places. In both cases the vdbe - ** has already been allocated. So assume sqlite3GetVdbe() is always - ** successful here. - */ - assert(v); - if( iCol<0 ){ - int iMem = ++pParse->nMem; - int iAddr; - - iAddr = sqlite3VdbeAddOp1(v, OP_If, iMem); - sqlite3VdbeAddOp2(v, OP_Integer, 1, iMem); - - sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); - eType = IN_INDEX_ROWID; - - sqlite3VdbeJumpHere(v, iAddr); - }else{ - Index *pIdx; /* Iterator variable */ - - /* The collation sequence used by the comparison. If an index is to - ** be used in place of a temp-table, it must be ordered according - ** to this collation sequence. */ - CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pExpr); - - /* Check that the affinity that will be used to perform the - ** comparison is the same as the affinity of the column. If - ** it is not, it is not possible to use any index. - */ - char aff = comparisonAffinity(pX); - int affinity_ok = (pTab->aCol[iCol].affinity==aff||aff==SQLITE_AFF_NONE); +static void initAvgEq(Index *pIdx){ + if( pIdx ){ + IndexSample *aSample = pIdx->aSample; + IndexSample *pFinal = &aSample[pIdx->nSample-1]; + int iCol; + int nCol = 1; + if( pIdx->nSampleCol>1 ){ + /* If this is stat4 data, then calculate aAvgEq[] values for all + ** sample columns except the last. The last is always set to 1, as + ** once the trailing PK fields are considered all index keys are + ** unique. */ + nCol = pIdx->nSampleCol-1; + pIdx->aAvgEq[nCol] = 1; + } + for(iCol=0; iColnSample; + int i; /* Used to iterate through samples */ + tRowcnt sumEq = 0; /* Sum of the nEq values */ + tRowcnt avgEq = 0; + tRowcnt nRow; /* Number of rows in index */ + i64 nSum100 = 0; /* Number of terms contributing to sumEq */ + i64 nDist100; /* Number of distinct values in index */ + + if( !pIdx->aiRowEst || iCol>=pIdx->nKeyCol || pIdx->aiRowEst[iCol+1]==0 ){ + nRow = pFinal->anLt[iCol]; + nDist100 = (i64)100 * pFinal->anDLt[iCol]; + nSample--; + }else{ + nRow = pIdx->aiRowEst[0]; + nDist100 = ((i64)100 * pIdx->aiRowEst[0]) / pIdx->aiRowEst[iCol+1]; + } - for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){ - if( (pIdx->aiColumn[0]==iCol) - && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq - && (!mustBeUnique || (pIdx->nColumn==1 && pIdx->onError!=OE_None)) + /* Set nSum to the number of distinct (iCol+1) field prefixes that + ** occur in the stat4 table for this index. Set sumEq to the sum of + ** the nEq values for column iCol for the same set (adding the value + ** only once where there exist duplicate prefixes). */ + for(i=0; inSample-1) + || aSample[i].anDLt[iCol]!=aSample[i+1].anDLt[iCol] ){ - int iMem = ++pParse->nMem; - int iAddr; - char *pKey; - - pKey = (char *)sqlite3IndexKeyinfo(pParse, pIdx); - iAddr = sqlite3VdbeAddOp1(v, OP_If, iMem); - sqlite3VdbeAddOp2(v, OP_Integer, 1, iMem); - - sqlite3VdbeAddOp4(v, OP_OpenRead, iTab, pIdx->tnum, iDb, - pKey,P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pIdx->zName)); - eType = IN_INDEX_INDEX; - - sqlite3VdbeJumpHere(v, iAddr); - if( prNotFound && !pTab->aCol[iCol].notNull ){ - *prNotFound = ++pParse->nMem; - } + sumEq += aSample[i].anEq[iCol]; + nSum100 += 100; } } - } - } - if( eType==0 ){ - /* Could not found an existing table or index to use as the RHS b-tree. - ** We will have to generate an ephemeral table to do the job. - */ - double savedNQueryLoop = pParse->nQueryLoop; - int rMayHaveNull = 0; - eType = IN_INDEX_EPH; - if( prNotFound ){ - *prNotFound = rMayHaveNull = ++pParse->nMem; - }else{ - testcase( pParse->nQueryLoop>(double)1 ); - pParse->nQueryLoop = (double)1; - if( pX->pLeft->iColumn<0 && !ExprHasAnyProperty(pX, EP_xIsSelect) ){ - eType = IN_INDEX_ROWID; + if( nDist100>nSum100 ){ + avgEq = ((i64)100 * (nRow - sumEq))/(nDist100 - nSum100); } + if( avgEq==0 ) avgEq = 1; + pIdx->aAvgEq[iCol] = avgEq; } - sqlite3CodeSubselect(pParse, pX, rMayHaveNull, eType==IN_INDEX_ROWID); - pParse->nQueryLoop = savedNQueryLoop; - }else{ - pX->iTable = iTab; } - return eType; } -#endif /* -** Generate code for scalar subqueries used as a subquery expression, EXISTS, -** or IN operators. Examples: -** -** (SELECT a FROM b) -- subquery -** EXISTS (SELECT a FROM b) -- EXISTS subquery -** x IN (4,5,11) -- IN operator with list on right-hand side -** x IN (SELECT a FROM b) -- IN operator with subquery on the right -** -** The pExpr parameter describes the expression that contains the IN -** operator or subquery. -** -** If parameter isRowid is non-zero, then expression pExpr is guaranteed -** to be of the form " IN (?, ?, ?)", where is a reference -** to some integer key column of a table B-Tree. In this case, use an -** intkey B-Tree to store the set of IN(...) values instead of the usual -** (slower) variable length keys B-Tree. +** Look up an index by name. Or, if the name of a WITHOUT ROWID table +** is supplied instead, find the PRIMARY KEY index for that table. +*/ +static Index *findIndexOrPrimaryKey( + sqlite3 *db, + const char *zName, + const char *zDb +){ + Index *pIdx = sqlite3FindIndex(db, zName, zDb); + if( pIdx==0 ){ + Table *pTab = sqlite3FindTable(db, zName, zDb); + if( pTab && !HasRowid(pTab) ) pIdx = sqlite3PrimaryKeyIndex(pTab); + } + return pIdx; +} + +/* +** Load the content from either the sqlite_stat4 or sqlite_stat3 table +** into the relevant Index.aSample[] arrays. ** -** If rMayHaveNull is non-zero, that means that the operation is an IN -** (not a SELECT or EXISTS) and that the RHS might contains NULLs. -** Furthermore, the IN is in a WHERE clause and that we really want -** to iterate over the RHS of the IN operator in order to quickly locate -** all corresponding LHS elements. All this routine does is initialize -** the register given by rMayHaveNull to NULL. Calling routines will take -** care of changing this register value to non-NULL if the RHS is NULL-free. +** Arguments zSql1 and zSql2 must point to SQL statements that return +** data equivalent to the following (statements are different for stat3, +** see the caller of this function for details): ** -** If rMayHaveNull is zero, that means that the subquery is being used -** for membership testing only. There is no need to initialize any -** registers to indicate the presense or absence of NULLs on the RHS. +** zSql1: SELECT idx,count(*) FROM %Q.sqlite_stat4 GROUP BY idx +** zSql2: SELECT idx,neq,nlt,ndlt,sample FROM %Q.sqlite_stat4 ** -** For a SELECT or EXISTS operator, return the register that holds the -** result. For IN operators or if an error occurs, the return value is 0. +** where %Q is replaced with the database name before the SQL is executed. */ -#ifndef SQLITE_OMIT_SUBQUERY -SQLITE_PRIVATE int sqlite3CodeSubselect( - Parse *pParse, /* Parsing context */ - Expr *pExpr, /* The IN, SELECT, or EXISTS operator */ - int rMayHaveNull, /* Register that records whether NULLs exist in RHS */ - int isRowid /* If true, LHS of IN operator is a rowid */ +static int loadStatTbl( + sqlite3 *db, /* Database handle */ + int bStat3, /* Assume single column records only */ + const char *zSql1, /* SQL statement 1 (see above) */ + const char *zSql2, /* SQL statement 2 (see above) */ + const char *zDb /* Database name (e.g. "main") */ ){ - int testAddr = 0; /* One-time test address */ - int rReg = 0; /* Register storing resulting */ - Vdbe *v = sqlite3GetVdbe(pParse); - if( NEVER(v==0) ) return 0; - sqlite3ExprCachePush(pParse); - - /* This code must be run in its entirety every time it is encountered - ** if any of the following is true: - ** - ** * The right-hand side is a correlated subquery - ** * The right-hand side is an expression list containing variables - ** * We are inside a trigger - ** - ** If all of the above are false, then we can run this code just once - ** save the results, and reuse the same result on subsequent invocations. - */ - if( !ExprHasAnyProperty(pExpr, EP_VarSelect) && !pParse->pTriggerTab ){ - int mem = ++pParse->nMem; - sqlite3VdbeAddOp1(v, OP_If, mem); - testAddr = sqlite3VdbeAddOp2(v, OP_Integer, 1, mem); - assert( testAddr>0 || pParse->db->mallocFailed ); - } + int rc; /* Result codes from subroutines */ + sqlite3_stmt *pStmt = 0; /* An SQL statement being run */ + char *zSql; /* Text of the SQL statement */ + Index *pPrevIdx = 0; /* Previous index in the loop */ + IndexSample *pSample; /* A slot in pIdx->aSample[] */ -#ifndef SQLITE_OMIT_EXPLAIN - if( pParse->explain==2 ){ - char *zMsg = sqlite3MPrintf( - pParse->db, "EXECUTE %s%s SUBQUERY %d", testAddr?"":"CORRELATED ", - pExpr->op==TK_IN?"LIST":"SCALAR", pParse->iNextSelectId - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); + assert( db->lookaside.bEnabled==0 ); + zSql = sqlite3MPrintf(db, zSql1, zDb); + if( !zSql ){ + return SQLITE_NOMEM; } -#endif - - switch( pExpr->op ){ - case TK_IN: { - char affinity; /* Affinity of the LHS of the IN */ - KeyInfo keyInfo; /* Keyinfo for the generated table */ - int addr; /* Address of OP_OpenEphemeral instruction */ - Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */ - - if( rMayHaveNull ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, rMayHaveNull); - } - - affinity = sqlite3ExprAffinity(pLeft); - - /* Whether this is an 'x IN(SELECT...)' or an 'x IN()' - ** expression it is handled the same way. An ephemeral table is - ** filled with single-field index keys representing the results - ** from the SELECT or the . - ** - ** If the 'x' expression is a column value, or the SELECT... - ** statement returns a column value, then the affinity of that - ** column is used to build the index keys. If both 'x' and the - ** SELECT... statement are columns, then numeric affinity is used - ** if either column has NUMERIC or INTEGER affinity. If neither - ** 'x' nor the SELECT... statement are columns, then numeric affinity - ** is used. - */ - pExpr->iTable = pParse->nTab++; - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pExpr->iTable, !isRowid); - if( rMayHaveNull==0 ) sqlite3VdbeChangeP5(v, BTREE_UNORDERED); - memset(&keyInfo, 0, sizeof(keyInfo)); - keyInfo.nField = 1; - - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - /* Case 1: expr IN (SELECT ...) - ** - ** Generate code to write the results of the select into the temporary - ** table allocated and opened above. - */ - SelectDest dest; - ExprList *pEList; - - assert( !isRowid ); - sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable); - dest.affinity = (u8)affinity; - assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable ); - pExpr->x.pSelect->iLimit = 0; - if( sqlite3Select(pParse, pExpr->x.pSelect, &dest) ){ - return 0; - } - pEList = pExpr->x.pSelect->pEList; - if( ALWAYS(pEList!=0 && pEList->nExpr>0) ){ - keyInfo.aColl[0] = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft, - pEList->a[0].pExpr); - } - }else if( ALWAYS(pExpr->x.pList!=0) ){ - /* Case 2: expr IN (exprlist) - ** - ** For each expression, build an index key from the evaluation and - ** store it in the temporary table. If is a column, then use - ** that columns affinity when building index keys. If is not - ** a column, use numeric affinity. - */ - int i; - ExprList *pList = pExpr->x.pList; - struct ExprList_item *pItem; - int r1, r2, r3; - - if( !affinity ){ - affinity = SQLITE_AFF_NONE; - } - keyInfo.aColl[0] = sqlite3ExprCollSeq(pParse, pExpr->pLeft); - - /* Loop through each expression in . */ - r1 = sqlite3GetTempReg(pParse); - r2 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_Null, 0, r2); - for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){ - Expr *pE2 = pItem->pExpr; - int iValToIns; - - /* If the expression is not constant then we will need to - ** disable the test that was generated above that makes sure - ** this code only executes once. Because for a non-constant - ** expression we need to rerun this code each time. - */ - if( testAddr && !sqlite3ExprIsConstant(pE2) ){ - sqlite3VdbeChangeToNoop(v, testAddr-1, 2); - testAddr = 0; - } + rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); + sqlite3DbFree(db, zSql); + if( rc ) return rc; - /* Evaluate the expression and insert it into the temp table */ - if( isRowid && sqlite3ExprIsInteger(pE2, &iValToIns) ){ - sqlite3VdbeAddOp3(v, OP_InsertInt, pExpr->iTable, r2, iValToIns); - }else{ - r3 = sqlite3ExprCodeTarget(pParse, pE2, r1); - if( isRowid ){ - sqlite3VdbeAddOp2(v, OP_MustBeInt, r3, - sqlite3VdbeCurrentAddr(v)+2); - sqlite3VdbeAddOp3(v, OP_Insert, pExpr->iTable, r2, r3); - }else{ - sqlite3VdbeAddOp4(v, OP_MakeRecord, r3, 1, r2, &affinity, 1); - sqlite3ExprCacheAffinityChange(pParse, r3, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pExpr->iTable, r2); - } - } - } - sqlite3ReleaseTempReg(pParse, r1); - sqlite3ReleaseTempReg(pParse, r2); - } - if( !isRowid ){ - sqlite3VdbeChangeP4(v, addr, (void *)&keyInfo, P4_KEYINFO); + while( sqlite3_step(pStmt)==SQLITE_ROW ){ + int nIdxCol = 1; /* Number of columns in stat4 records */ + + char *zIndex; /* Index name */ + Index *pIdx; /* Pointer to the index object */ + int nSample; /* Number of samples */ + int nByte; /* Bytes of space required */ + int i; /* Bytes of space required */ + tRowcnt *pSpace; + + zIndex = (char *)sqlite3_column_text(pStmt, 0); + if( zIndex==0 ) continue; + nSample = sqlite3_column_int(pStmt, 1); + pIdx = findIndexOrPrimaryKey(db, zIndex, zDb); + assert( pIdx==0 || bStat3 || pIdx->nSample==0 ); + /* Index.nSample is non-zero at this point if data has already been + ** loaded from the stat4 table. In this case ignore stat3 data. */ + if( pIdx==0 || pIdx->nSample ) continue; + if( bStat3==0 ){ + assert( !HasRowid(pIdx->pTable) || pIdx->nColumn==pIdx->nKeyCol+1 ); + if( !HasRowid(pIdx->pTable) && IsPrimaryKeyIndex(pIdx) ){ + nIdxCol = pIdx->nKeyCol; + }else{ + nIdxCol = pIdx->nColumn; } - break; } + pIdx->nSampleCol = nIdxCol; + nByte = sizeof(IndexSample) * nSample; + nByte += sizeof(tRowcnt) * nIdxCol * 3 * nSample; + nByte += nIdxCol * sizeof(tRowcnt); /* Space for Index.aAvgEq[] */ - case TK_EXISTS: - case TK_SELECT: - default: { - /* If this has to be a scalar SELECT. Generate code to put the - ** value of this select in a memory cell and record the number - ** of the memory cell in iColumn. If this is an EXISTS, write - ** an integer 0 (not exists) or 1 (exists) into a memory cell - ** and record that memory cell in iColumn. - */ - Select *pSel; /* SELECT statement to encode */ - SelectDest dest; /* How to deal with SELECt result */ + pIdx->aSample = sqlite3DbMallocZero(db, nByte); + if( pIdx->aSample==0 ){ + sqlite3_finalize(pStmt); + return SQLITE_NOMEM; + } + pSpace = (tRowcnt*)&pIdx->aSample[nSample]; + pIdx->aAvgEq = pSpace; pSpace += nIdxCol; + for(i=0; iaSample[i].anEq = pSpace; pSpace += nIdxCol; + pIdx->aSample[i].anLt = pSpace; pSpace += nIdxCol; + pIdx->aSample[i].anDLt = pSpace; pSpace += nIdxCol; + } + assert( ((u8*)pSpace)-nByte==(u8*)(pIdx->aSample) ); + } + rc = sqlite3_finalize(pStmt); + if( rc ) return rc; - testcase( pExpr->op==TK_EXISTS ); - testcase( pExpr->op==TK_SELECT ); - assert( pExpr->op==TK_EXISTS || pExpr->op==TK_SELECT ); + zSql = sqlite3MPrintf(db, zSql2, zDb); + if( !zSql ){ + return SQLITE_NOMEM; + } + rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); + sqlite3DbFree(db, zSql); + if( rc ) return rc; - assert( ExprHasProperty(pExpr, EP_xIsSelect) ); - pSel = pExpr->x.pSelect; - sqlite3SelectDestInit(&dest, 0, ++pParse->nMem); - if( pExpr->op==TK_SELECT ){ - dest.eDest = SRT_Mem; - sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iParm); - VdbeComment((v, "Init subquery result")); - }else{ - dest.eDest = SRT_Exists; - sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iParm); - VdbeComment((v, "Init EXISTS result")); - } - sqlite3ExprDelete(pParse->db, pSel->pLimit); - pSel->pLimit = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, - &sqlite3IntTokens[1]); - pSel->iLimit = 0; - if( sqlite3Select(pParse, pSel, &dest) ){ - return 0; - } - rReg = dest.iParm; - ExprSetIrreducible(pExpr); - break; + while( sqlite3_step(pStmt)==SQLITE_ROW ){ + char *zIndex; /* Index name */ + Index *pIdx; /* Pointer to the index object */ + int nCol = 1; /* Number of columns in index */ + + zIndex = (char *)sqlite3_column_text(pStmt, 0); + if( zIndex==0 ) continue; + pIdx = findIndexOrPrimaryKey(db, zIndex, zDb); + if( pIdx==0 ) continue; + /* This next condition is true if data has already been loaded from + ** the sqlite_stat4 table. In this case ignore stat3 data. */ + nCol = pIdx->nSampleCol; + if( bStat3 && nCol>1 ) continue; + if( pIdx!=pPrevIdx ){ + initAvgEq(pPrevIdx); + pPrevIdx = pIdx; + } + pSample = &pIdx->aSample[pIdx->nSample]; + decodeIntArray((char*)sqlite3_column_text(pStmt,1),nCol,pSample->anEq,0,0); + decodeIntArray((char*)sqlite3_column_text(pStmt,2),nCol,pSample->anLt,0,0); + decodeIntArray((char*)sqlite3_column_text(pStmt,3),nCol,pSample->anDLt,0,0); + + /* Take a copy of the sample. Add two 0x00 bytes the end of the buffer. + ** This is in case the sample record is corrupted. In that case, the + ** sqlite3VdbeRecordCompare() may read up to two varints past the + ** end of the allocated buffer before it realizes it is dealing with + ** a corrupt record. Adding the two 0x00 bytes prevents this from causing + ** a buffer overread. */ + pSample->n = sqlite3_column_bytes(pStmt, 4); + pSample->p = sqlite3DbMallocZero(db, pSample->n + 2); + if( pSample->p==0 ){ + sqlite3_finalize(pStmt); + return SQLITE_NOMEM; } + memcpy(pSample->p, sqlite3_column_blob(pStmt, 4), pSample->n); + pIdx->nSample++; + } + rc = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) initAvgEq(pPrevIdx); + return rc; +} + +/* +** Load content from the sqlite_stat4 and sqlite_stat3 tables into +** the Index.aSample[] arrays of all indices. +*/ +static int loadStat4(sqlite3 *db, const char *zDb){ + int rc = SQLITE_OK; /* Result codes from subroutines */ + + assert( db->lookaside.bEnabled==0 ); + if( sqlite3FindTable(db, "sqlite_stat4", zDb) ){ + rc = loadStatTbl(db, 0, + "SELECT idx,count(*) FROM %Q.sqlite_stat4 GROUP BY idx", + "SELECT idx,neq,nlt,ndlt,sample FROM %Q.sqlite_stat4", + zDb + ); } - if( testAddr ){ - sqlite3VdbeJumpHere(v, testAddr-1); + if( rc==SQLITE_OK && sqlite3FindTable(db, "sqlite_stat3", zDb) ){ + rc = loadStatTbl(db, 1, + "SELECT idx,count(*) FROM %Q.sqlite_stat3 GROUP BY idx", + "SELECT idx,neq,nlt,ndlt,sqlite_record(sample) FROM %Q.sqlite_stat3", + zDb + ); } - sqlite3ExprCachePop(pParse, 1); - return rReg; + return rc; } -#endif /* SQLITE_OMIT_SUBQUERY */ +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ -#ifndef SQLITE_OMIT_SUBQUERY /* -** Generate code for an IN expression. +** Load the content of the sqlite_stat1 and sqlite_stat3/4 tables. The +** contents of sqlite_stat1 are used to populate the Index.aiRowEst[] +** arrays. The contents of sqlite_stat3/4 are used to populate the +** Index.aSample[] arrays. ** -** x IN (SELECT ...) -** x IN (value, value, ...) +** If the sqlite_stat1 table is not present in the database, SQLITE_ERROR +** is returned. In this case, even if SQLITE_ENABLE_STAT3/4 was defined +** during compilation and the sqlite_stat3/4 table is present, no data is +** read from it. ** -** The left-hand side (LHS) is a scalar expression. The right-hand side (RHS) -** is an array of zero or more values. The expression is true if the LHS is -** contained within the RHS. The value of the expression is unknown (NULL) -** if the LHS is NULL or if the LHS is not contained within the RHS and the -** RHS contains one or more NULL values. +** If SQLITE_ENABLE_STAT3/4 was defined during compilation and the +** sqlite_stat4 table is not present in the database, SQLITE_ERROR is +** returned. However, in this case, data is read from the sqlite_stat1 +** table (if it is present) before returning. ** -** This routine generates code will jump to destIfFalse if the LHS is not -** contained within the RHS. If due to NULLs we cannot determine if the LHS -** is contained in the RHS then jump to destIfNull. If the LHS is contained -** within the RHS then fall through. +** If an OOM error occurs, this function always sets db->mallocFailed. +** This means if the caller does not care about other errors, the return +** code may be ignored. */ -static void sqlite3ExprCodeIN( - Parse *pParse, /* Parsing and code generating context */ - Expr *pExpr, /* The IN expression */ - int destIfFalse, /* Jump here if LHS is not contained in the RHS */ - int destIfNull /* Jump here if the results are unknown due to NULLs */ -){ - int rRhsHasNull = 0; /* Register that is true if RHS contains NULL values */ - char affinity; /* Comparison affinity to use */ - int eType; /* Type of the RHS */ - int r1; /* Temporary use register */ - Vdbe *v; /* Statement under construction */ - - /* Compute the RHS. After this step, the table with cursor - ** pExpr->iTable will contains the values that make up the RHS. - */ - v = pParse->pVdbe; - assert( v!=0 ); /* OOM detected prior to this routine */ - VdbeNoopComment((v, "begin IN expr")); - eType = sqlite3FindInIndex(pParse, pExpr, &rRhsHasNull); +SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3 *db, int iDb){ + analysisInfo sInfo; + HashElem *i; + char *zSql; + int rc; - /* Figure out the affinity to use to create a key from the results - ** of the expression. affinityStr stores a static string suitable for - ** P4 of OP_MakeRecord. - */ - affinity = comparisonAffinity(pExpr); + assert( iDb>=0 && iDbnDb ); + assert( db->aDb[iDb].pBt!=0 ); - /* Code the LHS, the from " IN (...)". - */ - sqlite3ExprCachePush(pParse); - r1 = sqlite3GetTempReg(pParse); - sqlite3ExprCode(pParse, pExpr->pLeft, r1); + /* Clear any prior statistics */ + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + Index *pIdx = sqliteHashData(i); + sqlite3DefaultRowEst(pIdx); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3DeleteIndexSamples(db, pIdx); + pIdx->aSample = 0; +#endif + } - /* If the LHS is NULL, then the result is either false or NULL depending - ** on whether the RHS is empty or not, respectively. - */ - if( destIfNull==destIfFalse ){ - /* Shortcut for the common case where the false and NULL outcomes are - ** the same. */ - sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); - }else{ - int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); - sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse); - sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull); - sqlite3VdbeJumpHere(v, addr1); + /* Check to make sure the sqlite_stat1 table exists */ + sInfo.db = db; + sInfo.zDatabase = db->aDb[iDb].zName; + if( sqlite3FindTable(db, "sqlite_stat1", sInfo.zDatabase)==0 ){ + return SQLITE_ERROR; } - if( eType==IN_INDEX_ROWID ){ - /* In this case, the RHS is the ROWID of table b-tree - */ - sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); - sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1); + /* Load new statistics out of the sqlite_stat1 table */ + zSql = sqlite3MPrintf(db, + "SELECT tbl,idx,stat FROM %Q.sqlite_stat1", sInfo.zDatabase); + if( zSql==0 ){ + rc = SQLITE_NOMEM; }else{ - /* In this case, the RHS is an index b-tree. - */ - sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1); - - /* If the set membership test fails, then the result of the - ** "x IN (...)" expression must be either 0 or NULL. If the set - ** contains no NULL values, then the result is 0. If the set - ** contains one or more NULL values, then the result of the - ** expression is also NULL. - */ - if( rRhsHasNull==0 || destIfFalse==destIfNull ){ - /* This branch runs if it is known at compile time that the RHS - ** cannot contain NULL values. This happens as the result - ** of a "NOT NULL" constraint in the database schema. - ** - ** Also run this branch if NULL is equivalent to FALSE - ** for this particular IN operator. - */ - sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1); - - }else{ - /* In this branch, the RHS of the IN might contain a NULL and - ** the presence of a NULL on the RHS makes a difference in the - ** outcome. - */ - int j1, j2, j3; - - /* First check to see if the LHS is contained in the RHS. If so, - ** then the presence of NULLs in the RHS does not matter, so jump - ** over all of the code that follows. - */ - j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1); + rc = sqlite3_exec(db, zSql, analysisLoader, &sInfo, 0); + sqlite3DbFree(db, zSql); + } - /* Here we begin generating code that runs if the LHS is not - ** contained within the RHS. Generate additional code that - ** tests the RHS for NULLs. If the RHS contains a NULL then - ** jump to destIfNull. If there are no NULLs in the RHS then - ** jump to destIfFalse. - */ - j2 = sqlite3VdbeAddOp1(v, OP_NotNull, rRhsHasNull); - j3 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, rRhsHasNull, 1); - sqlite3VdbeAddOp2(v, OP_Integer, -1, rRhsHasNull); - sqlite3VdbeJumpHere(v, j3); - sqlite3VdbeAddOp2(v, OP_AddImm, rRhsHasNull, 1); - sqlite3VdbeJumpHere(v, j2); - - /* Jump to the appropriate target depending on whether or not - ** the RHS contains a NULL - */ - sqlite3VdbeAddOp2(v, OP_If, rRhsHasNull, destIfNull); - sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); - /* The OP_Found at the top of this branch jumps here when true, - ** causing the overall IN expression evaluation to fall through. - */ - sqlite3VdbeJumpHere(v, j1); - } + /* Load the statistics from the sqlite_stat4 table. */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( rc==SQLITE_OK ){ + int lookasideEnabled = db->lookaside.bEnabled; + db->lookaside.bEnabled = 0; + rc = loadStat4(db, sInfo.zDatabase); + db->lookaside.bEnabled = lookasideEnabled; } - sqlite3ReleaseTempReg(pParse, r1); - sqlite3ExprCachePop(pParse, 1); - VdbeComment((v, "end IN expr")); -} -#endif /* SQLITE_OMIT_SUBQUERY */ - -/* -** Duplicate an 8-byte value -*/ -static char *dup8bytes(Vdbe *v, const char *in){ - char *out = sqlite3DbMallocRaw(sqlite3VdbeDb(v), 8); - if( out ){ - memcpy(out, in, 8); + for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + Index *pIdx = sqliteHashData(i); + sqlite3_free(pIdx->aiRowEst); + pIdx->aiRowEst = 0; } - return out; -} +#endif -#ifndef SQLITE_OMIT_FLOATING_POINT -/* -** Generate an instruction that will put the floating point -** value described by z[0..n-1] into register iMem. -** -** The z[] string will probably not be zero-terminated. But the -** z[n] character is guaranteed to be something that does not look -** like the continuation of the number. -*/ -static void codeReal(Vdbe *v, const char *z, int negateFlag, int iMem){ - if( ALWAYS(z!=0) ){ - double value; - char *zV; - sqlite3AtoF(z, &value, sqlite3Strlen30(z), SQLITE_UTF8); - assert( !sqlite3IsNaN(value) ); /* The new AtoF never returns NaN */ - if( negateFlag ) value = -value; - zV = dup8bytes(v, (char*)&value); - sqlite3VdbeAddOp4(v, OP_Real, 0, iMem, 0, zV, P4_REAL); + if( rc==SQLITE_NOMEM ){ + db->mallocFailed = 1; } + return rc; } -#endif +#endif /* SQLITE_OMIT_ANALYZE */ + +/************** End of analyze.c *********************************************/ +/************** Begin file attach.c ******************************************/ /* -** Generate an instruction that will put the integer describe by -** text z[0..n-1] into register iMem. +** 2003 April 6 ** -** Expr.u.zToken is always UTF8 and zero-terminated. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code used to implement the ATTACH and DETACH commands. */ -static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){ - Vdbe *v = pParse->pVdbe; - if( pExpr->flags & EP_IntValue ){ - int i = pExpr->u.iValue; - assert( i>=0 ); - if( negFlag ) i = -i; - sqlite3VdbeAddOp2(v, OP_Integer, i, iMem); - }else{ - int c; - i64 value; - const char *z = pExpr->u.zToken; - assert( z!=0 ); - c = sqlite3Atoi64(z, &value, sqlite3Strlen30(z), SQLITE_UTF8); - if( c==0 || (c==2 && negFlag) ){ - char *zV; - if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } - zV = dup8bytes(v, (char*)&value); - sqlite3VdbeAddOp4(v, OP_Int64, 0, iMem, 0, zV, P4_INT64); - }else{ -#ifdef SQLITE_OMIT_FLOATING_POINT - sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); -#else - codeReal(v, z, negFlag, iMem); -#endif - } - } -} +#ifndef SQLITE_OMIT_ATTACH /* -** Clear a cache entry. +** Resolve an expression that was part of an ATTACH or DETACH statement. This +** is slightly different from resolving a normal SQL expression, because simple +** identifiers are treated as strings, not possible column names or aliases. +** +** i.e. if the parser sees: +** +** ATTACH DATABASE abc AS def +** +** it treats the two expressions as literal strings 'abc' and 'def' instead of +** looking for columns of the same name. +** +** This only applies to the root node of pExpr, so the statement: +** +** ATTACH DATABASE abc||def AS 'db2' +** +** will fail because neither abc or def can be resolved. */ -static void cacheEntryClear(Parse *pParse, struct yColCache *p){ - if( p->tempReg ){ - if( pParse->nTempRegaTempReg) ){ - pParse->aTempReg[pParse->nTempReg++] = p->iReg; +static int resolveAttachExpr(NameContext *pName, Expr *pExpr) +{ + int rc = SQLITE_OK; + if( pExpr ){ + if( pExpr->op!=TK_ID ){ + rc = sqlite3ResolveExprNames(pName, pExpr); + }else{ + pExpr->op = TK_STRING; } - p->tempReg = 0; } + return rc; } - /* -** Record in the column cache that a particular column from a -** particular table is stored in a particular register. +** An SQL user-function registered to do the work of an ATTACH statement. The +** three arguments to the function come directly from an attach statement: +** +** ATTACH DATABASE x AS y KEY z +** +** SELECT sqlite_attach(x, y, z) +** +** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the +** third argument. */ -SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse *pParse, int iTab, int iCol, int iReg){ +static void attachFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ int i; - int minLru; - int idxLru; - struct yColCache *p; + int rc = 0; + sqlite3 *db = sqlite3_context_db_handle(context); + const char *zName; + const char *zFile; + char *zPath = 0; + char *zErr = 0; + unsigned int flags; + Db *aNew; + char *zErrDyn = 0; + sqlite3_vfs *pVfs; - assert( iReg>0 ); /* Register numbers are always positive */ - assert( iCol>=-1 && iCol<32768 ); /* Finite column numbers */ + UNUSED_PARAMETER(NotUsed); - /* The SQLITE_ColumnCache flag disables the column cache. This is used - ** for testing only - to verify that SQLite always gets the same answer - ** with and without the column cache. - */ - if( pParse->db->flags & SQLITE_ColumnCache ) return; + zFile = (const char *)sqlite3_value_text(argv[0]); + zName = (const char *)sqlite3_value_text(argv[1]); + if( zFile==0 ) zFile = ""; + if( zName==0 ) zName = ""; - /* First replace any existing entry. + /* Check for the following errors: ** - ** Actually, the way the column cache is currently used, we are guaranteed - ** that the object will never already be in cache. Verify this guarantee. + ** * Too many attached databases, + ** * Transaction currently open + ** * Specified database name already being used. */ -#ifndef NDEBUG - for(i=0, p=pParse->aColCache; iiReg && p->iTable==iTab && p->iColumn==iCol ){ - cacheEntryClear(pParse, p); - p->iLevel = pParse->iCacheLevel; - p->iReg = iReg; - p->lru = pParse->iCacheCnt++; - return; + if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ + zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", + db->aLimit[SQLITE_LIMIT_ATTACHED] + ); + goto attach_error; + } + if( !db->autoCommit ){ + zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction"); + goto attach_error; + } + for(i=0; inDb; i++){ + char *z = db->aDb[i].zName; + assert( z && zName ); + if( sqlite3StrICmp(z, zName)==0 ){ + zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); + goto attach_error; } -#endif - assert( p->iReg==0 || p->iTable!=iTab || p->iColumn!=iCol ); } -#endif - /* Find an empty slot and replace it */ - for(i=0, p=pParse->aColCache; iiReg==0 ){ - p->iLevel = pParse->iCacheLevel; - p->iTable = iTab; - p->iColumn = iCol; - p->iReg = iReg; - p->tempReg = 0; - p->lru = pParse->iCacheCnt++; - return; - } + /* Allocate the new entry in the db->aDb[] array and initialize the schema + ** hash tables. + */ + if( db->aDb==db->aDbStatic ){ + aNew = sqlite3DbMallocRaw(db, sizeof(db->aDb[0])*3 ); + if( aNew==0 ) return; + memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); + }else{ + aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); + if( aNew==0 ) return; } + db->aDb = aNew; + aNew = &db->aDb[db->nDb]; + memset(aNew, 0, sizeof(*aNew)); - /* Replace the last recently used */ - minLru = 0x7fffffff; - idxLru = -1; - for(i=0, p=pParse->aColCache; ilrulru; + /* Open the database file. If the btree is successfully opened, use + ** it to obtain the database schema. At this point the schema may + ** or may not be initialized. + */ + flags = db->openFlags; + rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); + return; + } + assert( pVfs ); + flags |= SQLITE_OPEN_MAIN_DB; + rc = sqlite3BtreeOpen(pVfs, zPath, db, &aNew->pBt, 0, flags); + sqlite3_free( zPath ); + db->nDb++; + if( rc==SQLITE_CONSTRAINT ){ + rc = SQLITE_ERROR; + zErrDyn = sqlite3MPrintf(db, "database is already attached"); + }else if( rc==SQLITE_OK ){ + Pager *pPager; + aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt); + if( !aNew->pSchema ){ + rc = SQLITE_NOMEM; + }else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){ + zErrDyn = sqlite3MPrintf(db, + "attached databases must use the same text encoding as main database"); + rc = SQLITE_ERROR; } + pPager = sqlite3BtreePager(aNew->pBt); + sqlite3PagerLockingMode(pPager, db->dfltLockMode); + sqlite3BtreeSecureDelete(aNew->pBt, + sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) ); +#ifndef SQLITE_OMIT_PAGER_PRAGMAS + sqlite3BtreeSetPagerFlags(aNew->pBt, 3 | (db->flags & PAGER_FLAGS_MASK)); +#endif } - if( ALWAYS(idxLru>=0) ){ - p = &pParse->aColCache[idxLru]; - p->iLevel = pParse->iCacheLevel; - p->iTable = iTab; - p->iColumn = iCol; - p->iReg = iReg; - p->tempReg = 0; - p->lru = pParse->iCacheCnt++; - return; + aNew->safety_level = 3; + aNew->zName = sqlite3DbStrDup(db, zName); + if( rc==SQLITE_OK && aNew->zName==0 ){ + rc = SQLITE_NOMEM; } -} -/* -** Indicate that registers between iReg..iReg+nReg-1 are being overwritten. -** Purge the range of registers from the column cache. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse *pParse, int iReg, int nReg){ - int i; - int iLast = iReg + nReg - 1; - struct yColCache *p; - for(i=0, p=pParse->aColCache; iiReg; - if( r>=iReg && r<=iLast ){ - cacheEntryClear(pParse, p); - p->iReg = 0; + +#ifdef SQLITE_HAS_CODEC + if( rc==SQLITE_OK ){ + extern int sqlite3CodecAttach(sqlite3*, int, const void*, int); + extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*); + int nKey; + char *zKey; + int t = sqlite3_value_type(argv[2]); + switch( t ){ + case SQLITE_INTEGER: + case SQLITE_FLOAT: + zErrDyn = sqlite3DbStrDup(db, "Invalid key value"); + rc = SQLITE_ERROR; + break; + + case SQLITE_TEXT: + case SQLITE_BLOB: + nKey = sqlite3_value_bytes(argv[2]); + zKey = (char *)sqlite3_value_blob(argv[2]); + rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey); + break; + + case SQLITE_NULL: + /* No key specified. Use the key from the main database */ + sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey); + if( nKey>0 || sqlite3BtreeGetReserve(db->aDb[0].pBt)>0 ){ + rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey); + } + break; } } -} - -/* -** Remember the current column cache context. Any new entries added -** added to the column cache after this call are removed when the -** corresponding pop occurs. -*/ -SQLITE_PRIVATE void sqlite3ExprCachePush(Parse *pParse){ - pParse->iCacheLevel++; -} +#endif -/* -** Remove from the column cache any entries that were added since the -** the previous N Push operations. In other words, restore the cache -** to the state it was in N Pushes ago. -*/ -SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse, int N){ - int i; - struct yColCache *p; - assert( N>0 ); - assert( pParse->iCacheLevel>=N ); - pParse->iCacheLevel -= N; - for(i=0, p=pParse->aColCache; iiReg && p->iLevel>pParse->iCacheLevel ){ - cacheEntryClear(pParse, p); - p->iReg = 0; + /* If the file was opened successfully, read the schema for the new database. + ** If this fails, or if opening the file failed, then close the file and + ** remove the entry from the db->aDb[] array. i.e. put everything back the way + ** we found it. + */ + if( rc==SQLITE_OK ){ + sqlite3BtreeEnterAll(db); + rc = sqlite3Init(db, &zErrDyn); + sqlite3BtreeLeaveAll(db); + } +#ifdef SQLITE_USER_AUTHENTICATION + if( rc==SQLITE_OK ){ + u8 newAuth = 0; + rc = sqlite3UserAuthCheckLogin(db, zName, &newAuth); + if( newAuthauth.authLevel ){ + rc = SQLITE_AUTH_USER; + } + } +#endif + if( rc ){ + int iDb = db->nDb - 1; + assert( iDb>=2 ); + if( db->aDb[iDb].pBt ){ + sqlite3BtreeClose(db->aDb[iDb].pBt); + db->aDb[iDb].pBt = 0; + db->aDb[iDb].pSchema = 0; + } + sqlite3ResetAllSchemasOfConnection(db); + db->nDb = iDb; + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + db->mallocFailed = 1; + sqlite3DbFree(db, zErrDyn); + zErrDyn = sqlite3MPrintf(db, "out of memory"); + }else if( zErrDyn==0 ){ + zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); } + goto attach_error; + } + + return; + +attach_error: + /* Return an error if we get here */ + if( zErrDyn ){ + sqlite3_result_error(context, zErrDyn, -1); + sqlite3DbFree(db, zErrDyn); } + if( rc ) sqlite3_result_error_code(context, rc); } /* -** When a cached column is reused, make sure that its register is -** no longer available as a temp register. ticket #3879: that same -** register might be in the cache in multiple places, so be sure to -** get them all. +** An SQL user-function registered to do the work of an DETACH statement. The +** three arguments to the function come directly from a detach statement: +** +** DETACH DATABASE x +** +** SELECT sqlite_detach(x) */ -static void sqlite3ExprCachePinRegister(Parse *pParse, int iReg){ +static void detachFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + const char *zName = (const char *)sqlite3_value_text(argv[0]); + sqlite3 *db = sqlite3_context_db_handle(context); int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; iiReg==iReg ){ - p->tempReg = 0; - } + Db *pDb = 0; + char zErr[128]; + + UNUSED_PARAMETER(NotUsed); + + if( zName==0 ) zName = ""; + for(i=0; inDb; i++){ + pDb = &db->aDb[i]; + if( pDb->pBt==0 ) continue; + if( sqlite3StrICmp(pDb->zName, zName)==0 ) break; } -} -/* -** Generate code to extract the value of the iCol-th column of a table. -*/ -SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable( - Vdbe *v, /* The VDBE under construction */ - Table *pTab, /* The table containing the value */ - int iTabCur, /* The cursor for this table */ - int iCol, /* Index of the column to extract */ - int regOut /* Extract the valud into this register */ -){ - if( iCol<0 || iCol==pTab->iPKey ){ - sqlite3VdbeAddOp2(v, OP_Rowid, iTabCur, regOut); - }else{ - int op = IsVirtual(pTab) ? OP_VColumn : OP_Column; - sqlite3VdbeAddOp3(v, op, iTabCur, iCol, regOut); + if( i>=db->nDb ){ + sqlite3_snprintf(sizeof(zErr),zErr, "no such database: %s", zName); + goto detach_error; } - if( iCol>=0 ){ - sqlite3ColumnDefault(v, pTab, iCol, regOut); + if( i<2 ){ + sqlite3_snprintf(sizeof(zErr),zErr, "cannot detach database %s", zName); + goto detach_error; + } + if( !db->autoCommit ){ + sqlite3_snprintf(sizeof(zErr), zErr, + "cannot DETACH database within transaction"); + goto detach_error; + } + if( sqlite3BtreeIsInReadTrans(pDb->pBt) || sqlite3BtreeIsInBackup(pDb->pBt) ){ + sqlite3_snprintf(sizeof(zErr),zErr, "database %s is locked", zName); + goto detach_error; } + + sqlite3BtreeClose(pDb->pBt); + pDb->pBt = 0; + pDb->pSchema = 0; + sqlite3ResetAllSchemasOfConnection(db); + return; + +detach_error: + sqlite3_result_error(context, zErr, -1); } /* -** Generate code that will extract the iColumn-th column from -** table pTab and store the column value in a register. An effort -** is made to store the column value in register iReg, but this is -** not guaranteed. The location of the column value is returned. -** -** There must be an open cursor to pTab in iTable when this routine -** is called. If iColumn<0 then code is generated that extracts the rowid. +** This procedure generates VDBE code for a single invocation of either the +** sqlite_detach() or sqlite_attach() SQL user functions. */ -SQLITE_PRIVATE int sqlite3ExprCodeGetColumn( - Parse *pParse, /* Parsing and code generating context */ - Table *pTab, /* Description of the table we are reading from */ - int iColumn, /* Index of the table column */ - int iTable, /* The cursor pointing to the table */ - int iReg /* Store results here */ +static void codeAttach( + Parse *pParse, /* The parser context */ + int type, /* Either SQLITE_ATTACH or SQLITE_DETACH */ + FuncDef const *pFunc,/* FuncDef wrapper for detachFunc() or attachFunc() */ + Expr *pAuthArg, /* Expression to pass to authorization callback */ + Expr *pFilename, /* Name of database file */ + Expr *pDbname, /* Name of the database to use internally */ + Expr *pKey /* Database key for encryption extension */ ){ - Vdbe *v = pParse->pVdbe; - int i; - struct yColCache *p; + int rc; + NameContext sName; + Vdbe *v; + sqlite3* db = pParse->db; + int regArgs; - for(i=0, p=pParse->aColCache; iiReg>0 && p->iTable==iTable && p->iColumn==iColumn ){ - p->lru = pParse->iCacheCnt++; - sqlite3ExprCachePinRegister(pParse, p->iReg); - return p->iReg; - } - } - assert( v!=0 ); - sqlite3ExprCodeGetColumnOfTable(v, pTab, iTable, iColumn, iReg); - sqlite3ExprCacheStore(pParse, iTable, iColumn, iReg); - return iReg; -} + memset(&sName, 0, sizeof(NameContext)); + sName.pParse = pParse; -/* -** Clear all column cache entries. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){ - int i; - struct yColCache *p; + if( + SQLITE_OK!=(rc = resolveAttachExpr(&sName, pFilename)) || + SQLITE_OK!=(rc = resolveAttachExpr(&sName, pDbname)) || + SQLITE_OK!=(rc = resolveAttachExpr(&sName, pKey)) + ){ + pParse->nErr++; + goto attach_end; + } - for(i=0, p=pParse->aColCache; iiReg ){ - cacheEntryClear(pParse, p); - p->iReg = 0; +#ifndef SQLITE_OMIT_AUTHORIZATION + if( pAuthArg ){ + char *zAuthArg; + if( pAuthArg->op==TK_STRING ){ + zAuthArg = pAuthArg->u.zToken; + }else{ + zAuthArg = 0; + } + rc = sqlite3AuthCheck(pParse, type, zAuthArg, 0, 0); + if(rc!=SQLITE_OK ){ + goto attach_end; } } -} +#endif /* SQLITE_OMIT_AUTHORIZATION */ -/* -** Record the fact that an affinity change has occurred on iCount -** registers starting with iStart. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse *pParse, int iStart, int iCount){ - sqlite3ExprCacheRemove(pParse, iStart, iCount); + + v = sqlite3GetVdbe(pParse); + regArgs = sqlite3GetTempRange(pParse, 4); + sqlite3ExprCode(pParse, pFilename, regArgs); + sqlite3ExprCode(pParse, pDbname, regArgs+1); + sqlite3ExprCode(pParse, pKey, regArgs+2); + + assert( v || db->mallocFailed ); + if( v ){ + sqlite3VdbeAddOp3(v, OP_Function, 0, regArgs+3-pFunc->nArg, regArgs+3); + assert( pFunc->nArg==-1 || (pFunc->nArg&0xff)==pFunc->nArg ); + sqlite3VdbeChangeP5(v, (u8)(pFunc->nArg)); + sqlite3VdbeChangeP4(v, -1, (char *)pFunc, P4_FUNCDEF); + + /* Code an OP_Expire. For an ATTACH statement, set P1 to true (expire this + ** statement only). For DETACH, set it to false (expire all existing + ** statements). + */ + sqlite3VdbeAddOp1(v, OP_Expire, (type==SQLITE_ATTACH)); + } + +attach_end: + sqlite3ExprDelete(db, pFilename); + sqlite3ExprDelete(db, pDbname); + sqlite3ExprDelete(db, pKey); } /* -** Generate code to move content from registers iFrom...iFrom+nReg-1 -** over to iTo..iTo+nReg-1. Keep the column cache up-to-date. +** Called by the parser to compile a DETACH statement. +** +** DETACH pDbname */ -SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse *pParse, int iFrom, int iTo, int nReg){ - int i; - struct yColCache *p; - if( NEVER(iFrom==iTo) ) return; - sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg); - for(i=0, p=pParse->aColCache; iiReg; - if( x>=iFrom && xiReg += iTo-iFrom; - } - } +SQLITE_PRIVATE void sqlite3Detach(Parse *pParse, Expr *pDbname){ + static const FuncDef detach_func = { + 1, /* nArg */ + SQLITE_UTF8, /* funcFlags */ + 0, /* pUserData */ + 0, /* pNext */ + detachFunc, /* xFunc */ + 0, /* xStep */ + 0, /* xFinalize */ + "sqlite_detach", /* zName */ + 0, /* pHash */ + 0 /* pDestructor */ + }; + codeAttach(pParse, SQLITE_DETACH, &detach_func, pDbname, 0, 0, pDbname); } /* -** Generate code to copy content from registers iFrom...iFrom+nReg-1 -** over to iTo..iTo+nReg-1. +** Called by the parser to compile an ATTACH statement. +** +** ATTACH p AS pDbname KEY pKey */ -SQLITE_PRIVATE void sqlite3ExprCodeCopy(Parse *pParse, int iFrom, int iTo, int nReg){ - int i; - if( NEVER(iFrom==iTo) ) return; - for(i=0; ipVdbe, OP_Copy, iFrom+i, iTo+i); - } +SQLITE_PRIVATE void sqlite3Attach(Parse *pParse, Expr *p, Expr *pDbname, Expr *pKey){ + static const FuncDef attach_func = { + 3, /* nArg */ + SQLITE_UTF8, /* funcFlags */ + 0, /* pUserData */ + 0, /* pNext */ + attachFunc, /* xFunc */ + 0, /* xStep */ + 0, /* xFinalize */ + "sqlite_attach", /* zName */ + 0, /* pHash */ + 0 /* pDestructor */ + }; + codeAttach(pParse, SQLITE_ATTACH, &attach_func, p, p, pDbname, pKey); } +#endif /* SQLITE_OMIT_ATTACH */ -#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) /* -** Return true if any register in the range iFrom..iTo (inclusive) -** is used as part of the column cache. -** -** This routine is used within assert() and testcase() macros only -** and does not appear in a normal build. +** Initialize a DbFixer structure. This routine must be called prior +** to passing the structure to one of the sqliteFixAAAA() routines below. */ -static int usedAsColumnCache(Parse *pParse, int iFrom, int iTo){ - int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; iiReg; - if( r>=iFrom && r<=iTo ) return 1; /*NO_TEST*/ - } - return 0; +SQLITE_PRIVATE void sqlite3FixInit( + DbFixer *pFix, /* The fixer to be initialized */ + Parse *pParse, /* Error messages will be written here */ + int iDb, /* This is the database that must be used */ + const char *zType, /* "view", "trigger", or "index" */ + const Token *pName /* Name of the view, trigger, or index */ +){ + sqlite3 *db; + + db = pParse->db; + assert( db->nDb>iDb ); + pFix->pParse = pParse; + pFix->zDb = db->aDb[iDb].zName; + pFix->pSchema = db->aDb[iDb].pSchema; + pFix->zType = zType; + pFix->pName = pName; + pFix->bVarOnly = (iDb==1); } -#endif /* SQLITE_DEBUG || SQLITE_COVERAGE_TEST */ /* -** Generate code into the current Vdbe to evaluate the given -** expression. Attempt to store the results in register "target". -** Return the register where results are stored. +** The following set of routines walk through the parse tree and assign +** a specific database to all table references where the database name +** was left unspecified in the original SQL statement. The pFix structure +** must have been initialized by a prior call to sqlite3FixInit(). ** -** With this routine, there is no guarantee that results will -** be stored in target. The result might be stored in some other -** register if it is convenient to do so. The calling function -** must check the return code and move the results to the desired -** register. +** These routines are used to make sure that an index, trigger, or +** view in one database does not refer to objects in a different database. +** (Exception: indices, triggers, and views in the TEMP database are +** allowed to refer to anything.) If a reference is explicitly made +** to an object in a different database, an error message is added to +** pParse->zErrMsg and these routines return non-zero. If everything +** checks out, these routines return 0. */ -SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target){ - Vdbe *v = pParse->pVdbe; /* The VM under construction */ - int op; /* The opcode being coded */ - int inReg = target; /* Results stored in register inReg */ - int regFree1 = 0; /* If non-zero free this temporary register */ - int regFree2 = 0; /* If non-zero free this temporary register */ - int r1, r2, r3, r4; /* Various register numbers */ - sqlite3 *db = pParse->db; /* The database connection */ - - assert( target>0 && target<=pParse->nMem ); - if( v==0 ){ - assert( pParse->db->mallocFailed ); - return 0; - } +SQLITE_PRIVATE int sqlite3FixSrcList( + DbFixer *pFix, /* Context of the fixation */ + SrcList *pList /* The Source list to check and modify */ +){ + int i; + const char *zDb; + struct SrcList_item *pItem; - if( pExpr==0 ){ - op = TK_NULL; - }else{ - op = pExpr->op; - } - switch( op ){ - case TK_AGG_COLUMN: { - AggInfo *pAggInfo = pExpr->pAggInfo; - struct AggInfo_col *pCol = &pAggInfo->aCol[pExpr->iAgg]; - if( !pAggInfo->directMode ){ - assert( pCol->iMem>0 ); - inReg = pCol->iMem; - break; - }else if( pAggInfo->useSortingIdx ){ - sqlite3VdbeAddOp3(v, OP_Column, pAggInfo->sortingIdx, - pCol->iSorterColumn, target); - break; - } - /* Otherwise, fall thru into the TK_COLUMN case */ - } - case TK_COLUMN: { - if( pExpr->iTable<0 ){ - /* This only happens when coding check constraints */ - assert( pParse->ckBase>0 ); - inReg = pExpr->iColumn + pParse->ckBase; - }else{ - inReg = sqlite3ExprCodeGetColumn(pParse, pExpr->pTab, - pExpr->iColumn, pExpr->iTable, target); + if( NEVER(pList==0) ) return 0; + zDb = pFix->zDb; + for(i=0, pItem=pList->a; inSrc; i++, pItem++){ + if( pFix->bVarOnly==0 ){ + if( pItem->zDatabase && sqlite3StrICmp(pItem->zDatabase, zDb) ){ + sqlite3ErrorMsg(pFix->pParse, + "%s %T cannot reference objects in database %s", + pFix->zType, pFix->pName, pItem->zDatabase); + return 1; } - break; - } - case TK_INTEGER: { - codeInteger(pParse, pExpr, 0, target); - break; - } -#ifndef SQLITE_OMIT_FLOATING_POINT - case TK_FLOAT: { - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - codeReal(v, pExpr->u.zToken, 0, target); - break; - } -#endif - case TK_STRING: { - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - sqlite3VdbeAddOp4(v, OP_String8, 0, target, 0, pExpr->u.zToken, 0); - break; - } - case TK_NULL: { - sqlite3VdbeAddOp2(v, OP_Null, 0, target); - break; - } -#ifndef SQLITE_OMIT_BLOB_LITERAL - case TK_BLOB: { - int n; - const char *z; - char *zBlob; - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - assert( pExpr->u.zToken[0]=='x' || pExpr->u.zToken[0]=='X' ); - assert( pExpr->u.zToken[1]=='\'' ); - z = &pExpr->u.zToken[2]; - n = sqlite3Strlen30(z) - 1; - assert( z[n]=='\'' ); - zBlob = sqlite3HexToBlob(sqlite3VdbeDb(v), z, n); - sqlite3VdbeAddOp4(v, OP_Blob, n/2, target, 0, zBlob, P4_DYNAMIC); - break; + sqlite3DbFree(pFix->pParse->db, pItem->zDatabase); + pItem->zDatabase = 0; + pItem->pSchema = pFix->pSchema; } +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER) + if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1; + if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1; #endif - case TK_VARIABLE: { - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - assert( pExpr->u.zToken!=0 ); - assert( pExpr->u.zToken[0]!=0 ); - sqlite3VdbeAddOp2(v, OP_Variable, pExpr->iColumn, target); - if( pExpr->u.zToken[1]!=0 ){ - assert( pExpr->u.zToken[0]=='?' - || strcmp(pExpr->u.zToken, pParse->azVar[pExpr->iColumn-1])==0 ); - sqlite3VdbeChangeP4(v, -1, pParse->azVar[pExpr->iColumn-1], P4_STATIC); - } - break; - } - case TK_REGISTER: { - inReg = pExpr->iTable; - break; - } - case TK_AS: { - inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); - break; - } -#ifndef SQLITE_OMIT_CAST - case TK_CAST: { - /* Expressions of the form: CAST(pLeft AS token) */ - int aff, to_op; - inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - aff = sqlite3AffinityType(pExpr->u.zToken); - to_op = aff - SQLITE_AFF_TEXT + OP_ToText; - assert( to_op==OP_ToText || aff!=SQLITE_AFF_TEXT ); - assert( to_op==OP_ToBlob || aff!=SQLITE_AFF_NONE ); - assert( to_op==OP_ToNumeric || aff!=SQLITE_AFF_NUMERIC ); - assert( to_op==OP_ToInt || aff!=SQLITE_AFF_INTEGER ); - assert( to_op==OP_ToReal || aff!=SQLITE_AFF_REAL ); - testcase( to_op==OP_ToText ); - testcase( to_op==OP_ToBlob ); - testcase( to_op==OP_ToNumeric ); - testcase( to_op==OP_ToInt ); - testcase( to_op==OP_ToReal ); - if( inReg!=target ){ - sqlite3VdbeAddOp2(v, OP_SCopy, inReg, target); - inReg = target; - } - sqlite3VdbeAddOp1(v, to_op, inReg); - testcase( usedAsColumnCache(pParse, inReg, inReg) ); - sqlite3ExprCacheAffinityChange(pParse, inReg, 1); - break; + } + return 0; +} +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER) +SQLITE_PRIVATE int sqlite3FixSelect( + DbFixer *pFix, /* Context of the fixation */ + Select *pSelect /* The SELECT statement to be fixed to one database */ +){ + while( pSelect ){ + if( sqlite3FixExprList(pFix, pSelect->pEList) ){ + return 1; } -#endif /* SQLITE_OMIT_CAST */ - case TK_LT: - case TK_LE: - case TK_GT: - case TK_GE: - case TK_NE: - case TK_EQ: { - assert( TK_LT==OP_Lt ); - assert( TK_LE==OP_Le ); - assert( TK_GT==OP_Gt ); - assert( TK_GE==OP_Ge ); - assert( TK_EQ==OP_Eq ); - assert( TK_NE==OP_Ne ); - testcase( op==TK_LT ); - testcase( op==TK_LE ); - testcase( op==TK_GT ); - testcase( op==TK_GE ); - testcase( op==TK_EQ ); - testcase( op==TK_NE ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, inReg, SQLITE_STOREP2); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; + if( sqlite3FixSrcList(pFix, pSelect->pSrc) ){ + return 1; } - case TK_IS: - case TK_ISNOT: { - testcase( op==TK_IS ); - testcase( op==TK_ISNOT ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - op = (op==TK_IS) ? TK_EQ : TK_NE; - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, inReg, SQLITE_STOREP2 | SQLITE_NULLEQ); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; + if( sqlite3FixExpr(pFix, pSelect->pWhere) ){ + return 1; } - case TK_AND: - case TK_OR: - case TK_PLUS: - case TK_STAR: - case TK_MINUS: - case TK_REM: - case TK_BITAND: - case TK_BITOR: - case TK_SLASH: - case TK_LSHIFT: - case TK_RSHIFT: - case TK_CONCAT: { - assert( TK_AND==OP_And ); - assert( TK_OR==OP_Or ); - assert( TK_PLUS==OP_Add ); - assert( TK_MINUS==OP_Subtract ); - assert( TK_REM==OP_Remainder ); - assert( TK_BITAND==OP_BitAnd ); - assert( TK_BITOR==OP_BitOr ); - assert( TK_SLASH==OP_Divide ); - assert( TK_LSHIFT==OP_ShiftLeft ); - assert( TK_RSHIFT==OP_ShiftRight ); - assert( TK_CONCAT==OP_Concat ); - testcase( op==TK_AND ); - testcase( op==TK_OR ); - testcase( op==TK_PLUS ); - testcase( op==TK_MINUS ); - testcase( op==TK_REM ); - testcase( op==TK_BITAND ); - testcase( op==TK_BITOR ); - testcase( op==TK_SLASH ); - testcase( op==TK_LSHIFT ); - testcase( op==TK_RSHIFT ); - testcase( op==TK_CONCAT ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - sqlite3VdbeAddOp3(v, op, r2, r1, target); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; + if( sqlite3FixExprList(pFix, pSelect->pGroupBy) ){ + return 1; } - case TK_UMINUS: { - Expr *pLeft = pExpr->pLeft; - assert( pLeft ); - if( pLeft->op==TK_INTEGER ){ - codeInteger(pParse, pLeft, 1, target); -#ifndef SQLITE_OMIT_FLOATING_POINT - }else if( pLeft->op==TK_FLOAT ){ - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - codeReal(v, pLeft->u.zToken, 1, target); -#endif - }else{ - regFree1 = r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_Integer, 0, r1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free2); - sqlite3VdbeAddOp3(v, OP_Subtract, r2, r1, target); - testcase( regFree2==0 ); - } - inReg = target; - break; + if( sqlite3FixExpr(pFix, pSelect->pHaving) ){ + return 1; } - case TK_BITNOT: - case TK_NOT: { - assert( TK_BITNOT==OP_BitNot ); - assert( TK_NOT==OP_Not ); - testcase( op==TK_BITNOT ); - testcase( op==TK_NOT ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - testcase( regFree1==0 ); - inReg = target; - sqlite3VdbeAddOp2(v, op, r1, inReg); - break; + if( sqlite3FixExprList(pFix, pSelect->pOrderBy) ){ + return 1; } - case TK_ISNULL: - case TK_NOTNULL: { - int addr; - assert( TK_ISNULL==OP_IsNull ); - assert( TK_NOTNULL==OP_NotNull ); - testcase( op==TK_ISNULL ); - testcase( op==TK_NOTNULL ); - sqlite3VdbeAddOp2(v, OP_Integer, 1, target); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - testcase( regFree1==0 ); - addr = sqlite3VdbeAddOp1(v, op, r1); - sqlite3VdbeAddOp2(v, OP_AddImm, target, -1); - sqlite3VdbeJumpHere(v, addr); - break; + if( sqlite3FixExpr(pFix, pSelect->pLimit) ){ + return 1; } - case TK_AGG_FUNCTION: { - AggInfo *pInfo = pExpr->pAggInfo; - if( pInfo==0 ){ - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - sqlite3ErrorMsg(pParse, "misuse of aggregate: %s()", pExpr->u.zToken); - }else{ - inReg = pInfo->aFunc[pExpr->iAgg].iMem; - } - break; + if( sqlite3FixExpr(pFix, pSelect->pOffset) ){ + return 1; } - case TK_CONST_FUNC: - case TK_FUNCTION: { - ExprList *pFarg; /* List of function arguments */ - int nFarg; /* Number of function arguments */ - FuncDef *pDef; /* The function definition object */ - int nId; /* Length of the function name in bytes */ - const char *zId; /* The function name */ - int constMask = 0; /* Mask of function arguments that are constant */ - int i; /* Loop counter */ - u8 enc = ENC(db); /* The text encoding used by this database */ - CollSeq *pColl = 0; /* A collating sequence */ - - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - testcase( op==TK_CONST_FUNC ); - testcase( op==TK_FUNCTION ); - if( ExprHasAnyProperty(pExpr, EP_TokenOnly) ){ - pFarg = 0; - }else{ - pFarg = pExpr->x.pList; - } - nFarg = pFarg ? pFarg->nExpr : 0; - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - zId = pExpr->u.zToken; - nId = sqlite3Strlen30(zId); - pDef = sqlite3FindFunction(db, zId, nId, nFarg, enc, 0); - if( pDef==0 ){ - sqlite3ErrorMsg(pParse, "unknown function: %.*s()", nId, zId); - break; - } - - /* Attempt a direct implementation of the built-in COALESCE() and - ** IFNULL() functions. This avoids unnecessary evalation of - ** arguments past the first non-NULL argument. - */ - if( pDef->flags & SQLITE_FUNC_COALESCE ){ - int endCoalesce = sqlite3VdbeMakeLabel(v); - assert( nFarg>=2 ); - sqlite3ExprCode(pParse, pFarg->a[0].pExpr, target); - for(i=1; ia[i].pExpr, target); - sqlite3ExprCachePop(pParse, 1); - } - sqlite3VdbeResolveLabel(v, endCoalesce); - break; - } - - - if( pFarg ){ - r1 = sqlite3GetTempRange(pParse, nFarg); - sqlite3ExprCachePush(pParse); /* Ticket 2ea2425d34be */ - sqlite3ExprCodeExprList(pParse, pFarg, r1, 1); - sqlite3ExprCachePop(pParse, 1); /* Ticket 2ea2425d34be */ + pSelect = pSelect->pPrior; + } + return 0; +} +SQLITE_PRIVATE int sqlite3FixExpr( + DbFixer *pFix, /* Context of the fixation */ + Expr *pExpr /* The expression to be fixed to one database */ +){ + while( pExpr ){ + if( pExpr->op==TK_VARIABLE ){ + if( pFix->pParse->db->init.busy ){ + pExpr->op = TK_NULL; }else{ - r1 = 0; - } -#ifndef SQLITE_OMIT_VIRTUALTABLE - /* Possibly overload the function if the first argument is - ** a virtual table column. - ** - ** For infix functions (LIKE, GLOB, REGEXP, and MATCH) use the - ** second argument, not the first, as the argument to test to - ** see if it is a column in a virtual table. This is done because - ** the left operand of infix functions (the operand we want to - ** control overloading) ends up as the second argument to the - ** function. The expression "A glob B" is equivalent to - ** "glob(B,A). We want to use the A in "A glob B" to test - ** for function overloading. But we use the B term in "glob(B,A)". - */ - if( nFarg>=2 && (pExpr->flags & EP_InfixFunc) ){ - pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[1].pExpr); - }else if( nFarg>0 ){ - pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[0].pExpr); - } -#endif - for(i=0; ia[i].pExpr) ){ - constMask |= (1<flags & SQLITE_FUNC_NEEDCOLL)!=0 && !pColl ){ - pColl = sqlite3ExprCollSeq(pParse, pFarg->a[i].pExpr); - } - } - if( pDef->flags & SQLITE_FUNC_NEEDCOLL ){ - if( !pColl ) pColl = db->pDfltColl; - sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ); - } - sqlite3VdbeAddOp4(v, OP_Function, constMask, r1, target, - (char*)pDef, P4_FUNCDEF); - sqlite3VdbeChangeP5(v, (u8)nFarg); - if( nFarg ){ - sqlite3ReleaseTempRange(pParse, r1, nFarg); + sqlite3ErrorMsg(pFix->pParse, "%s cannot use variables", pFix->zType); + return 1; } - break; } -#ifndef SQLITE_OMIT_SUBQUERY - case TK_EXISTS: - case TK_SELECT: { - testcase( op==TK_EXISTS ); - testcase( op==TK_SELECT ); - inReg = sqlite3CodeSubselect(pParse, pExpr, 0, 0); - break; + if( ExprHasProperty(pExpr, EP_TokenOnly) ) break; + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + if( sqlite3FixSelect(pFix, pExpr->x.pSelect) ) return 1; + }else{ + if( sqlite3FixExprList(pFix, pExpr->x.pList) ) return 1; } - case TK_IN: { - int destIfFalse = sqlite3VdbeMakeLabel(v); - int destIfNull = sqlite3VdbeMakeLabel(v); - sqlite3VdbeAddOp2(v, OP_Null, 0, target); - sqlite3ExprCodeIN(pParse, pExpr, destIfFalse, destIfNull); - sqlite3VdbeAddOp2(v, OP_Integer, 1, target); - sqlite3VdbeResolveLabel(v, destIfFalse); - sqlite3VdbeAddOp2(v, OP_AddImm, target, 0); - sqlite3VdbeResolveLabel(v, destIfNull); - break; + if( sqlite3FixExpr(pFix, pExpr->pRight) ){ + return 1; } -#endif /* SQLITE_OMIT_SUBQUERY */ - - - /* - ** x BETWEEN y AND z - ** - ** This is equivalent to - ** - ** x>=y AND x<=z - ** - ** X is stored in pExpr->pLeft. - ** Y is stored in pExpr->pList->a[0].pExpr. - ** Z is stored in pExpr->pList->a[1].pExpr. - */ - case TK_BETWEEN: { - Expr *pLeft = pExpr->pLeft; - struct ExprList_item *pLItem = pExpr->x.pList->a; - Expr *pRight = pLItem->pExpr; + pExpr = pExpr->pLeft; + } + return 0; +} +SQLITE_PRIVATE int sqlite3FixExprList( + DbFixer *pFix, /* Context of the fixation */ + ExprList *pList /* The expression to be fixed to one database */ +){ + int i; + struct ExprList_item *pItem; + if( pList==0 ) return 0; + for(i=0, pItem=pList->a; inExpr; i++, pItem++){ + if( sqlite3FixExpr(pFix, pItem->pExpr) ){ + return 1; + } + } + return 0; +} +#endif - r1 = sqlite3ExprCodeTemp(pParse, pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - r3 = sqlite3GetTempReg(pParse); - r4 = sqlite3GetTempReg(pParse); - codeCompare(pParse, pLeft, pRight, OP_Ge, - r1, r2, r3, SQLITE_STOREP2); - pLItem++; - pRight = pLItem->pExpr; - sqlite3ReleaseTempReg(pParse, regFree2); - r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2); - testcase( regFree2==0 ); - codeCompare(pParse, pLeft, pRight, OP_Le, r1, r2, r4, SQLITE_STOREP2); - sqlite3VdbeAddOp3(v, OP_And, r3, r4, target); - sqlite3ReleaseTempReg(pParse, r3); - sqlite3ReleaseTempReg(pParse, r4); - break; +#ifndef SQLITE_OMIT_TRIGGER +SQLITE_PRIVATE int sqlite3FixTriggerStep( + DbFixer *pFix, /* Context of the fixation */ + TriggerStep *pStep /* The trigger step be fixed to one database */ +){ + while( pStep ){ + if( sqlite3FixSelect(pFix, pStep->pSelect) ){ + return 1; } - case TK_UPLUS: { - inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); - break; + if( sqlite3FixExpr(pFix, pStep->pWhere) ){ + return 1; + } + if( sqlite3FixExprList(pFix, pStep->pExprList) ){ + return 1; } + pStep = pStep->pNext; + } + return 0; +} +#endif - case TK_TRIGGER: { - /* If the opcode is TK_TRIGGER, then the expression is a reference - ** to a column in the new.* or old.* pseudo-tables available to - ** trigger programs. In this case Expr.iTable is set to 1 for the - ** new.* pseudo-table, or 0 for the old.* pseudo-table. Expr.iColumn - ** is set to the column of the pseudo-table to read, or to -1 to - ** read the rowid field. - ** - ** The expression is implemented using an OP_Param opcode. The p1 - ** parameter is set to 0 for an old.rowid reference, or to (i+1) - ** to reference another column of the old.* pseudo-table, where - ** i is the index of the column. For a new.rowid reference, p1 is - ** set to (n+1), where n is the number of columns in each pseudo-table. - ** For a reference to any other column in the new.* pseudo-table, p1 - ** is set to (n+2+i), where n and i are as defined previously. For - ** example, if the table on which triggers are being fired is - ** declared as: - ** - ** CREATE TABLE t1(a, b); - ** - ** Then p1 is interpreted as follows: - ** - ** p1==0 -> old.rowid p1==3 -> new.rowid - ** p1==1 -> old.a p1==4 -> new.a - ** p1==2 -> old.b p1==5 -> new.b - */ - Table *pTab = pExpr->pTab; - int p1 = pExpr->iTable * (pTab->nCol+1) + 1 + pExpr->iColumn; +/************** End of attach.c **********************************************/ +/************** Begin file auth.c ********************************************/ +/* +** 2003 January 11 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code used to implement the sqlite3_set_authorizer() +** API. This facility is an optional feature of the library. Embedded +** systems that do not need this facility may omit it by recompiling +** the library with -DSQLITE_OMIT_AUTHORIZATION=1 +*/ - assert( pExpr->iTable==0 || pExpr->iTable==1 ); - assert( pExpr->iColumn>=-1 && pExpr->iColumnnCol ); - assert( pTab->iPKey<0 || pExpr->iColumn!=pTab->iPKey ); - assert( p1>=0 && p1<(pTab->nCol*2+2) ); +/* +** All of the code in this file may be omitted by defining a single +** macro. +*/ +#ifndef SQLITE_OMIT_AUTHORIZATION - sqlite3VdbeAddOp2(v, OP_Param, p1, target); - VdbeComment((v, "%s.%s -> $%d", - (pExpr->iTable ? "new" : "old"), - (pExpr->iColumn<0 ? "rowid" : pExpr->pTab->aCol[pExpr->iColumn].zName), - target - )); +/* +** Set or clear the access authorization function. +** +** The access authorization function is be called during the compilation +** phase to verify that the user has read and/or write access permission on +** various fields of the database. The first argument to the auth function +** is a copy of the 3rd argument to this routine. The second argument +** to the auth function is one of these constants: +** +** SQLITE_CREATE_INDEX +** SQLITE_CREATE_TABLE +** SQLITE_CREATE_TEMP_INDEX +** SQLITE_CREATE_TEMP_TABLE +** SQLITE_CREATE_TEMP_TRIGGER +** SQLITE_CREATE_TEMP_VIEW +** SQLITE_CREATE_TRIGGER +** SQLITE_CREATE_VIEW +** SQLITE_DELETE +** SQLITE_DROP_INDEX +** SQLITE_DROP_TABLE +** SQLITE_DROP_TEMP_INDEX +** SQLITE_DROP_TEMP_TABLE +** SQLITE_DROP_TEMP_TRIGGER +** SQLITE_DROP_TEMP_VIEW +** SQLITE_DROP_TRIGGER +** SQLITE_DROP_VIEW +** SQLITE_INSERT +** SQLITE_PRAGMA +** SQLITE_READ +** SQLITE_SELECT +** SQLITE_TRANSACTION +** SQLITE_UPDATE +** +** The third and fourth arguments to the auth function are the name of +** the table and the column that are being accessed. The auth function +** should return either SQLITE_OK, SQLITE_DENY, or SQLITE_IGNORE. If +** SQLITE_OK is returned, it means that access is allowed. SQLITE_DENY +** means that the SQL statement will never-run - the sqlite3_exec() call +** will return with an error. SQLITE_IGNORE means that the SQL statement +** should run but attempts to read the specified column will return NULL +** and attempts to write the column will be ignored. +** +** Setting the auth function to NULL disables this hook. The default +** setting of the auth function is NULL. +*/ +SQLITE_API int sqlite3_set_authorizer( + sqlite3 *db, + int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), + void *pArg +){ + sqlite3_mutex_enter(db->mutex); + db->xAuth = (sqlite3_xauth)xAuth; + db->pAuthArg = pArg; + sqlite3ExpirePreparedStatements(db); + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} -#ifndef SQLITE_OMIT_FLOATING_POINT - /* If the column has REAL affinity, it may currently be stored as an - ** integer. Use OP_RealAffinity to make sure it is really real. */ - if( pExpr->iColumn>=0 - && pTab->aCol[pExpr->iColumn].affinity==SQLITE_AFF_REAL - ){ - sqlite3VdbeAddOp1(v, OP_RealAffinity, target); - } +/* +** Write an error message into pParse->zErrMsg that explains that the +** user-supplied authorization function returned an illegal value. +*/ +static void sqliteAuthBadReturnCode(Parse *pParse){ + sqlite3ErrorMsg(pParse, "authorizer malfunction"); + pParse->rc = SQLITE_ERROR; +} + +/* +** Invoke the authorization callback for permission to read column zCol from +** table zTab in database zDb. This function assumes that an authorization +** callback has been registered (i.e. that sqlite3.xAuth is not NULL). +** +** If SQLITE_IGNORE is returned and pExpr is not NULL, then pExpr is changed +** to an SQL NULL expression. Otherwise, if pExpr is NULL, then SQLITE_IGNORE +** is treated as SQLITE_DENY. In this case an error is left in pParse. +*/ +SQLITE_PRIVATE int sqlite3AuthReadCol( + Parse *pParse, /* The parser context */ + const char *zTab, /* Table name */ + const char *zCol, /* Column name */ + int iDb /* Index of containing database. */ +){ + sqlite3 *db = pParse->db; /* Database handle */ + char *zDb = db->aDb[iDb].zName; /* Name of attached database */ + int rc; /* Auth callback return code */ + + rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext +#ifdef SQLITE_USER_AUTHENTICATION + ,db->auth.zAuthUser #endif - break; + ); + if( rc==SQLITE_DENY ){ + if( db->nDb>2 || iDb!=0 ){ + sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol); + }else{ + sqlite3ErrorMsg(pParse, "access to %s.%s is prohibited", zTab, zCol); } + pParse->rc = SQLITE_AUTH; + }else if( rc!=SQLITE_IGNORE && rc!=SQLITE_OK ){ + sqliteAuthBadReturnCode(pParse); + } + return rc; +} +/* +** The pExpr should be a TK_COLUMN expression. The table referred to +** is in pTabList or else it is the NEW or OLD table of a trigger. +** Check to see if it is OK to read this particular column. +** +** If the auth function returns SQLITE_IGNORE, change the TK_COLUMN +** instruction into a TK_NULL. If the auth function returns SQLITE_DENY, +** then generate an error. +*/ +SQLITE_PRIVATE void sqlite3AuthRead( + Parse *pParse, /* The parser context */ + Expr *pExpr, /* The expression to check authorization on */ + Schema *pSchema, /* The schema of the expression */ + SrcList *pTabList /* All table that pExpr might refer to */ +){ + sqlite3 *db = pParse->db; + Table *pTab = 0; /* The table being read */ + const char *zCol; /* Name of the column of the table */ + int iSrc; /* Index in pTabList->a[] of table being read */ + int iDb; /* The index of the database the expression refers to */ + int iCol; /* Index of column in table */ - /* - ** Form A: - ** CASE x WHEN e1 THEN r1 WHEN e2 THEN r2 ... WHEN eN THEN rN ELSE y END - ** - ** Form B: - ** CASE WHEN e1 THEN r1 WHEN e2 THEN r2 ... WHEN eN THEN rN ELSE y END - ** - ** Form A is can be transformed into the equivalent form B as follows: - ** CASE WHEN x=e1 THEN r1 WHEN x=e2 THEN r2 ... - ** WHEN x=eN THEN rN ELSE y END - ** - ** X (if it exists) is in pExpr->pLeft. - ** Y is in pExpr->pRight. The Y is also optional. If there is no - ** ELSE clause and no other term matches, then the result of the - ** exprssion is NULL. - ** Ei is in pExpr->pList->a[i*2] and Ri is pExpr->pList->a[i*2+1]. - ** - ** The result of the expression is the Ri for the first matching Ei, - ** or if there is no matching Ei, the ELSE term Y, or if there is - ** no ELSE term, NULL. - */ - default: assert( op==TK_CASE ); { - int endLabel; /* GOTO label for end of CASE stmt */ - int nextCase; /* GOTO label for next WHEN clause */ - int nExpr; /* 2x number of WHEN terms */ - int i; /* Loop counter */ - ExprList *pEList; /* List of WHEN terms */ - struct ExprList_item *aListelem; /* Array of WHEN terms */ - Expr opCompare; /* The X==Ei expression */ - Expr cacheX; /* Cached expression X */ - Expr *pX; /* The X expression */ - Expr *pTest = 0; /* X==Ei (form A) or just Ei (form B) */ - VVA_ONLY( int iCacheLevel = pParse->iCacheLevel; ) + if( db->xAuth==0 ) return; + iDb = sqlite3SchemaToIndex(pParse->db, pSchema); + if( iDb<0 ){ + /* An attempt to read a column out of a subquery or other + ** temporary table. */ + return; + } - assert( !ExprHasProperty(pExpr, EP_xIsSelect) && pExpr->x.pList ); - assert((pExpr->x.pList->nExpr % 2) == 0); - assert(pExpr->x.pList->nExpr > 0); - pEList = pExpr->x.pList; - aListelem = pEList->a; - nExpr = pEList->nExpr; - endLabel = sqlite3VdbeMakeLabel(v); - if( (pX = pExpr->pLeft)!=0 ){ - cacheX = *pX; - testcase( pX->op==TK_COLUMN ); - testcase( pX->op==TK_REGISTER ); - cacheX.iTable = sqlite3ExprCodeTemp(pParse, pX, ®Free1); - testcase( regFree1==0 ); - cacheX.op = TK_REGISTER; - opCompare.op = TK_EQ; - opCompare.pLeft = &cacheX; - pTest = &opCompare; - /* Ticket b351d95f9cd5ef17e9d9dbae18f5ca8611190001: - ** The value in regFree1 might get SCopy-ed into the file result. - ** So make sure that the regFree1 register is not reused for other - ** purposes and possibly overwritten. */ - regFree1 = 0; - } - for(i=0; iop==TK_COLUMN ); - sqlite3ExprIfFalse(pParse, pTest, nextCase, SQLITE_JUMPIFNULL); - testcase( aListelem[i+1].pExpr->op==TK_COLUMN ); - testcase( aListelem[i+1].pExpr->op==TK_REGISTER ); - sqlite3ExprCode(pParse, aListelem[i+1].pExpr, target); - sqlite3VdbeAddOp2(v, OP_Goto, 0, endLabel); - sqlite3ExprCachePop(pParse, 1); - sqlite3VdbeResolveLabel(v, nextCase); - } - if( pExpr->pRight ){ - sqlite3ExprCachePush(pParse); - sqlite3ExprCode(pParse, pExpr->pRight, target); - sqlite3ExprCachePop(pParse, 1); - }else{ - sqlite3VdbeAddOp2(v, OP_Null, 0, target); + assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); + if( pExpr->op==TK_TRIGGER ){ + pTab = pParse->pTriggerTab; + }else{ + assert( pTabList ); + for(iSrc=0; ALWAYS(iSrcnSrc); iSrc++){ + if( pExpr->iTable==pTabList->a[iSrc].iCursor ){ + pTab = pTabList->a[iSrc].pTab; + break; } - assert( db->mallocFailed || pParse->nErr>0 - || pParse->iCacheLevel==iCacheLevel ); - sqlite3VdbeResolveLabel(v, endLabel); - break; } -#ifndef SQLITE_OMIT_TRIGGER - case TK_RAISE: { - assert( pExpr->affinity==OE_Rollback - || pExpr->affinity==OE_Abort - || pExpr->affinity==OE_Fail - || pExpr->affinity==OE_Ignore - ); - if( !pParse->pTriggerTab ){ - sqlite3ErrorMsg(pParse, - "RAISE() may only be used within a trigger-program"); - return 0; - } - if( pExpr->affinity==OE_Abort ){ - sqlite3MayAbort(pParse); - } - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - if( pExpr->affinity==OE_Ignore ){ - sqlite3VdbeAddOp4( - v, OP_Halt, SQLITE_OK, OE_Ignore, 0, pExpr->u.zToken,0); - }else{ - sqlite3HaltConstraint(pParse, pExpr->affinity, pExpr->u.zToken, 0); - } + } + iCol = pExpr->iColumn; + if( NEVER(pTab==0) ) return; - break; - } + if( iCol>=0 ){ + assert( iColnCol ); + zCol = pTab->aCol[iCol].zName; + }else if( pTab->iPKey>=0 ){ + assert( pTab->iPKeynCol ); + zCol = pTab->aCol[pTab->iPKey].zName; + }else{ + zCol = "ROWID"; + } + assert( iDb>=0 && iDbnDb ); + if( SQLITE_IGNORE==sqlite3AuthReadCol(pParse, pTab->zName, zCol, iDb) ){ + pExpr->op = TK_NULL; + } +} + +/* +** Do an authorization check using the code and arguments given. Return +** either SQLITE_OK (zero) or SQLITE_IGNORE or SQLITE_DENY. If SQLITE_DENY +** is returned, then the error count and error message in pParse are +** modified appropriately. +*/ +SQLITE_PRIVATE int sqlite3AuthCheck( + Parse *pParse, + int code, + const char *zArg1, + const char *zArg2, + const char *zArg3 +){ + sqlite3 *db = pParse->db; + int rc; + + /* Don't do any authorization checks if the database is initialising + ** or if the parser is being invoked from within sqlite3_declare_vtab. + */ + if( db->init.busy || IN_DECLARE_VTAB ){ + return SQLITE_OK; + } + + if( db->xAuth==0 ){ + return SQLITE_OK; + } + rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext +#ifdef SQLITE_USER_AUTHENTICATION + ,db->auth.zAuthUser #endif + ); + if( rc==SQLITE_DENY ){ + sqlite3ErrorMsg(pParse, "not authorized"); + pParse->rc = SQLITE_AUTH; + }else if( rc!=SQLITE_OK && rc!=SQLITE_IGNORE ){ + rc = SQLITE_DENY; + sqliteAuthBadReturnCode(pParse); + } + return rc; +} + +/* +** Push an authorization context. After this routine is called, the +** zArg3 argument to authorization callbacks will be zContext until +** popped. Or if pParse==0, this routine is a no-op. +*/ +SQLITE_PRIVATE void sqlite3AuthContextPush( + Parse *pParse, + AuthContext *pContext, + const char *zContext +){ + assert( pParse ); + pContext->pParse = pParse; + pContext->zAuthContext = pParse->zAuthContext; + pParse->zAuthContext = zContext; +} + +/* +** Pop an authorization context that was previously pushed +** by sqlite3AuthContextPush +*/ +SQLITE_PRIVATE void sqlite3AuthContextPop(AuthContext *pContext){ + if( pContext->pParse ){ + pContext->pParse->zAuthContext = pContext->zAuthContext; + pContext->pParse = 0; } - sqlite3ReleaseTempReg(pParse, regFree1); - sqlite3ReleaseTempReg(pParse, regFree2); - return inReg; } +#endif /* SQLITE_OMIT_AUTHORIZATION */ + +/************** End of auth.c ************************************************/ +/************** Begin file build.c *******************************************/ /* -** Generate code to evaluate an expression and store the results -** into a register. Return the register number where the results -** are stored. +** 2001 September 15 ** -** If the register is a temporary register that can be deallocated, -** then write its number into *pReg. If the result register is not -** a temporary, then set *pReg to zero. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains C code routines that are called by the SQLite parser +** when syntax rules are reduced. The routines in this file handle the +** following kinds of SQL syntax: +** +** CREATE TABLE +** DROP TABLE +** CREATE INDEX +** DROP INDEX +** creating ID lists +** BEGIN TRANSACTION +** COMMIT +** ROLLBACK */ -SQLITE_PRIVATE int sqlite3ExprCodeTemp(Parse *pParse, Expr *pExpr, int *pReg){ - int r1 = sqlite3GetTempReg(pParse); - int r2 = sqlite3ExprCodeTarget(pParse, pExpr, r1); - if( r2==r1 ){ - *pReg = r1; - }else{ - sqlite3ReleaseTempReg(pParse, r1); - *pReg = 0; - } - return r2; -} /* -** Generate code that will evaluate expression pExpr and store the -** results in register target. The results are guaranteed to appear -** in register target. +** This routine is called when a new SQL statement is beginning to +** be parsed. Initialize the pParse structure as needed. */ -SQLITE_PRIVATE int sqlite3ExprCode(Parse *pParse, Expr *pExpr, int target){ - int inReg; - - assert( target>0 && target<=pParse->nMem ); - if( pExpr && pExpr->op==TK_REGISTER ){ - sqlite3VdbeAddOp2(pParse->pVdbe, OP_Copy, pExpr->iTable, target); - }else{ - inReg = sqlite3ExprCodeTarget(pParse, pExpr, target); - assert( pParse->pVdbe || pParse->db->mallocFailed ); - if( inReg!=target && pParse->pVdbe ){ - sqlite3VdbeAddOp2(pParse->pVdbe, OP_SCopy, inReg, target); - } - } - return target; +SQLITE_PRIVATE void sqlite3BeginParse(Parse *pParse, int explainFlag){ + pParse->explain = (u8)explainFlag; + pParse->nVar = 0; } +#ifndef SQLITE_OMIT_SHARED_CACHE /* -** Generate code that evalutes the given expression and puts the result -** in register target. +** The TableLock structure is only used by the sqlite3TableLock() and +** codeTableLocks() functions. +*/ +struct TableLock { + int iDb; /* The database containing the table to be locked */ + int iTab; /* The root page of the table to be locked */ + u8 isWriteLock; /* True for write lock. False for a read lock */ + const char *zName; /* Name of the table */ +}; + +/* +** Record the fact that we want to lock a table at run-time. ** -** Also make a copy of the expression results into another "cache" register -** and modify the expression so that the next time it is evaluated, -** the result is a copy of the cache register. +** The table to be locked has root page iTab and is found in database iDb. +** A read or a write lock can be taken depending on isWritelock. ** -** This routine is used for expressions that are used multiple -** times. They are evaluated once and the results of the expression -** are reused. +** This routine just records the fact that the lock is desired. The +** code to make the lock occur is generated by a later call to +** codeTableLocks() which occurs during sqlite3FinishCoding(). */ -SQLITE_PRIVATE int sqlite3ExprCodeAndCache(Parse *pParse, Expr *pExpr, int target){ - Vdbe *v = pParse->pVdbe; - int inReg; - inReg = sqlite3ExprCode(pParse, pExpr, target); - assert( target>0 ); - /* This routine is called for terms to INSERT or UPDATE. And the only - ** other place where expressions can be converted into TK_REGISTER is - ** in WHERE clause processing. So as currently implemented, there is - ** no way for a TK_REGISTER to exist here. But it seems prudent to - ** keep the ALWAYS() in case the conditions above change with future - ** modifications or enhancements. */ - if( ALWAYS(pExpr->op!=TK_REGISTER) ){ - int iMem; - iMem = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Copy, inReg, iMem); - pExpr->iTable = iMem; - pExpr->op2 = pExpr->op; - pExpr->op = TK_REGISTER; +SQLITE_PRIVATE void sqlite3TableLock( + Parse *pParse, /* Parsing context */ + int iDb, /* Index of the database containing the table to lock */ + int iTab, /* Root page number of the table to be locked */ + u8 isWriteLock, /* True for a write lock */ + const char *zName /* Name of the table to be locked */ +){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + int i; + int nBytes; + TableLock *p; + assert( iDb>=0 ); + + for(i=0; inTableLock; i++){ + p = &pToplevel->aTableLock[i]; + if( p->iDb==iDb && p->iTab==iTab ){ + p->isWriteLock = (p->isWriteLock || isWriteLock); + return; + } + } + + nBytes = sizeof(TableLock) * (pToplevel->nTableLock+1); + pToplevel->aTableLock = + sqlite3DbReallocOrFree(pToplevel->db, pToplevel->aTableLock, nBytes); + if( pToplevel->aTableLock ){ + p = &pToplevel->aTableLock[pToplevel->nTableLock++]; + p->iDb = iDb; + p->iTab = iTab; + p->isWriteLock = isWriteLock; + p->zName = zName; + }else{ + pToplevel->nTableLock = 0; + pToplevel->db->mallocFailed = 1; } - return inReg; } /* -** Return TRUE if pExpr is an constant expression that is appropriate -** for factoring out of a loop. Appropriate expressions are: -** -** * Any expression that evaluates to two or more opcodes. -** -** * Any OP_Integer, OP_Real, OP_String, OP_Blob, OP_Null, -** or OP_Variable that does not need to be placed in a -** specific register. -** -** There is no point in factoring out single-instruction constant -** expressions that need to be placed in a particular register. -** We could factor them out, but then we would end up adding an -** OP_SCopy instruction to move the value into the correct register -** later. We might as well just use the original instruction and -** avoid the OP_SCopy. +** Code an OP_TableLock instruction for each table locked by the +** statement (configured by calls to sqlite3TableLock()). */ -static int isAppropriateForFactoring(Expr *p){ - if( !sqlite3ExprIsConstantNotJoin(p) ){ - return 0; /* Only constant expressions are appropriate for factoring */ - } - if( (p->flags & EP_FixedDest)==0 ){ - return 1; /* Any constant without a fixed destination is appropriate */ +static void codeTableLocks(Parse *pParse){ + int i; + Vdbe *pVdbe; + + pVdbe = sqlite3GetVdbe(pParse); + assert( pVdbe!=0 ); /* sqlite3GetVdbe cannot fail: VDBE already allocated */ + + for(i=0; inTableLock; i++){ + TableLock *p = &pParse->aTableLock[i]; + int p1 = p->iDb; + sqlite3VdbeAddOp4(pVdbe, OP_TableLock, p1, p->iTab, p->isWriteLock, + p->zName, P4_STATIC); } - while( p->op==TK_UPLUS ) p = p->pLeft; - switch( p->op ){ -#ifndef SQLITE_OMIT_BLOB_LITERAL - case TK_BLOB: +} +#else + #define codeTableLocks(x) #endif - case TK_VARIABLE: - case TK_INTEGER: - case TK_FLOAT: - case TK_NULL: - case TK_STRING: { - testcase( p->op==TK_BLOB ); - testcase( p->op==TK_VARIABLE ); - testcase( p->op==TK_INTEGER ); - testcase( p->op==TK_FLOAT ); - testcase( p->op==TK_NULL ); - testcase( p->op==TK_STRING ); - /* Single-instruction constants with a fixed destination are - ** better done in-line. If we factor them, they will just end - ** up generating an OP_SCopy to move the value to the destination - ** register. */ - return 0; - } - case TK_UMINUS: { - if( p->pLeft->op==TK_FLOAT || p->pLeft->op==TK_INTEGER ){ - return 0; - } - break; - } - default: { - break; - } - } + +/* +** Return TRUE if the given yDbMask object is empty - if it contains no +** 1 bits. This routine is used by the DbMaskAllZero() and DbMaskNotZero() +** macros when SQLITE_MAX_ATTACHED is greater than 30. +*/ +#if SQLITE_MAX_ATTACHED>30 +SQLITE_PRIVATE int sqlite3DbMaskAllZero(yDbMask m){ + int i; + for(i=0; ipParse; - switch( pExpr->op ){ - case TK_IN: - case TK_REGISTER: { - return WRC_Prune; +SQLITE_PRIVATE void sqlite3FinishCoding(Parse *pParse){ + sqlite3 *db; + Vdbe *v; + + assert( pParse->pToplevel==0 ); + db = pParse->db; + if( db->mallocFailed ) return; + if( pParse->nested ) return; + if( pParse->nErr ) return; + + /* Begin by generating some termination code at the end of the + ** vdbe program + */ + v = sqlite3GetVdbe(pParse); + assert( !pParse->isMultiWrite + || sqlite3VdbeAssertMayAbort(v, pParse->mayAbort)); + if( v ){ + while( sqlite3VdbeDeletePriorOpcode(v, OP_Close) ){} + sqlite3VdbeAddOp0(v, OP_Halt); + +#if SQLITE_USER_AUTHENTICATION + if( pParse->nTableLock>0 && db->init.busy==0 ){ + sqlite3UserAuthInit(db); + if( db->auth.authLevelrc = SQLITE_AUTH_USER; + sqlite3ErrorMsg(pParse, "user not authenticated"); + return; + } } - case TK_FUNCTION: - case TK_AGG_FUNCTION: - case TK_CONST_FUNC: { - /* The arguments to a function have a fixed destination. - ** Mark them this way to avoid generated unneeded OP_SCopy - ** instructions. +#endif + + /* The cookie mask contains one bit for each database file open. + ** (Bit 0 is for main, bit 1 is for temp, and so forth.) Bits are + ** set for each database that is used. Generate code to start a + ** transaction on each used database and to verify the schema cookie + ** on each used database. + */ + if( db->mallocFailed==0 + && (DbMaskNonZero(pParse->cookieMask) || pParse->pConstExpr) + ){ + int iDb, i; + assert( sqlite3VdbeGetOp(v, 0)->opcode==OP_Init ); + sqlite3VdbeJumpHere(v, 0); + for(iDb=0; iDbnDb; iDb++){ + if( DbMaskTest(pParse->cookieMask, iDb)==0 ) continue; + sqlite3VdbeUsesBtree(v, iDb); + sqlite3VdbeAddOp4Int(v, + OP_Transaction, /* Opcode */ + iDb, /* P1 */ + DbMaskTest(pParse->writeMask,iDb), /* P2 */ + pParse->cookieValue[iDb], /* P3 */ + db->aDb[iDb].pSchema->iGeneration /* P4 */ + ); + if( db->init.busy==0 ) sqlite3VdbeChangeP5(v, 1); + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + for(i=0; inVtabLock; i++){ + char *vtab = (char *)sqlite3GetVTable(db, pParse->apVtabLock[i]); + sqlite3VdbeAddOp4(v, OP_VBegin, 0, 0, 0, vtab, P4_VTAB); + } + pParse->nVtabLock = 0; +#endif + + /* Once all the cookies have been verified and transactions opened, + ** obtain the required table-locks. This is a no-op unless the + ** shared-cache feature is enabled. */ - ExprList *pList = pExpr->x.pList; - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - if( pList ){ - int i = pList->nExpr; - struct ExprList_item *pItem = pList->a; - for(; i>0; i--, pItem++){ - if( ALWAYS(pItem->pExpr) ) pItem->pExpr->flags |= EP_FixedDest; + codeTableLocks(pParse); + + /* Initialize any AUTOINCREMENT data structures required. + */ + sqlite3AutoincrementBegin(pParse); + + /* Code constant expressions that where factored out of inner loops */ + if( pParse->pConstExpr ){ + ExprList *pEL = pParse->pConstExpr; + pParse->okConstFactor = 0; + for(i=0; inExpr; i++){ + sqlite3ExprCode(pParse, pEL->a[i].pExpr, pEL->a[i].u.iConstExprReg); } } - break; + + /* Finally, jump back to the beginning of the executable code. */ + sqlite3VdbeAddOp2(v, OP_Goto, 0, 1); } } - if( isAppropriateForFactoring(pExpr) ){ - int r1 = ++pParse->nMem; - int r2; - r2 = sqlite3ExprCodeTarget(pParse, pExpr, r1); - if( NEVER(r1!=r2) ) sqlite3ReleaseTempReg(pParse, r1); - pExpr->op2 = pExpr->op; - pExpr->op = TK_REGISTER; - pExpr->iTable = r2; - return WRC_Prune; + + + /* Get the VDBE program ready for execution + */ + if( v && ALWAYS(pParse->nErr==0) && !db->mallocFailed ){ + assert( pParse->iCacheLevel==0 ); /* Disables and re-enables match */ + /* A minimum of one cursor is required if autoincrement is used + * See ticket [a696379c1f08866] */ + if( pParse->pAinc!=0 && pParse->nTab==0 ) pParse->nTab = 1; + sqlite3VdbeMakeReady(v, pParse); + pParse->rc = SQLITE_DONE; + pParse->colNamesSet = 0; + }else{ + pParse->rc = SQLITE_ERROR; } - return WRC_Continue; + pParse->nTab = 0; + pParse->nMem = 0; + pParse->nSet = 0; + pParse->nVar = 0; + DbMaskZero(pParse->cookieMask); } /* -** Preevaluate constant subexpressions within pExpr and store the -** results in registers. Modify pExpr so that the constant subexpresions -** are TK_REGISTER opcodes that refer to the precomputed values. -** -** This routine is a no-op if the jump to the cookie-check code has -** already occur. Since the cookie-check jump is generated prior to -** any other serious processing, this check ensures that there is no -** way to accidently bypass the constant initializations. +** Run the parser and code generator recursively in order to generate +** code for the SQL statement given onto the end of the pParse context +** currently under construction. When the parser is run recursively +** this way, the final OP_Halt is not appended and other initialization +** and finalization steps are omitted because those are handling by the +** outermost parser. ** -** This routine is also a no-op if the SQLITE_FactorOutConst optimization -** is disabled via the sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS) -** interface. This allows test logic to verify that the same answer is -** obtained for queries regardless of whether or not constants are -** precomputed into registers or if they are inserted in-line. +** Not everything is nestable. This facility is designed to permit +** INSERT, UPDATE, and DELETE operations against SQLITE_MASTER. Use +** care if you decide to try to use this routine for some other purposes. */ -SQLITE_PRIVATE void sqlite3ExprCodeConstants(Parse *pParse, Expr *pExpr){ - Walker w; - if( pParse->cookieGoto ) return; - if( (pParse->db->flags & SQLITE_FactorOutConst)!=0 ) return; - w.xExprCallback = evalConstExpr; - w.xSelectCallback = 0; - w.pParse = pParse; - sqlite3WalkExpr(&w, pExpr); +SQLITE_PRIVATE void sqlite3NestedParse(Parse *pParse, const char *zFormat, ...){ + va_list ap; + char *zSql; + char *zErrMsg = 0; + sqlite3 *db = pParse->db; +# define SAVE_SZ (sizeof(Parse) - offsetof(Parse,nVar)) + char saveBuf[SAVE_SZ]; + + if( pParse->nErr ) return; + assert( pParse->nested<10 ); /* Nesting should only be of limited depth */ + va_start(ap, zFormat); + zSql = sqlite3VMPrintf(db, zFormat, ap); + va_end(ap); + if( zSql==0 ){ + return; /* A malloc must have failed */ + } + pParse->nested++; + memcpy(saveBuf, &pParse->nVar, SAVE_SZ); + memset(&pParse->nVar, 0, SAVE_SZ); + sqlite3RunParser(pParse, zSql, &zErrMsg); + sqlite3DbFree(db, zErrMsg); + sqlite3DbFree(db, zSql); + memcpy(&pParse->nVar, saveBuf, SAVE_SZ); + pParse->nested--; } +#if SQLITE_USER_AUTHENTICATION +/* +** Return TRUE if zTable is the name of the system table that stores the +** list of users and their access credentials. +*/ +SQLITE_PRIVATE int sqlite3UserAuthTable(const char *zTable){ + return sqlite3_stricmp(zTable, "sqlite_user")==0; +} +#endif /* -** Generate code that pushes the value of every element of the given -** expression list into a sequence of registers beginning at target. +** Locate the in-memory structure that describes a particular database +** table given the name of that table and (optionally) the name of the +** database containing the table. Return NULL if not found. ** -** Return the number of elements evaluated. +** If zDatabase is 0, all databases are searched for the table and the +** first matching table is returned. (No checking for duplicate table +** names is done.) The search order is TEMP first, then MAIN, then any +** auxiliary databases added using the ATTACH command. +** +** See also sqlite3LocateTable(). */ -SQLITE_PRIVATE int sqlite3ExprCodeExprList( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* The expression list to be coded */ - int target, /* Where to write results */ - int doHardCopy /* Make a hard copy of every element */ -){ - struct ExprList_item *pItem; - int i, n; - assert( pList!=0 ); - assert( target>0 ); - assert( pParse->pVdbe!=0 ); /* Never gets this far otherwise */ - n = pList->nExpr; - for(pItem=pList->a, i=0; ipExpr; - int inReg = sqlite3ExprCodeTarget(pParse, pExpr, target+i); - if( inReg!=target+i ){ - sqlite3VdbeAddOp2(pParse->pVdbe, doHardCopy ? OP_Copy : OP_SCopy, - inReg, target+i); - } +SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3 *db, const char *zName, const char *zDatabase){ + Table *p = 0; + int i; + assert( zName!=0 ); + /* All mutexes are required for schema access. Make sure we hold them. */ + assert( zDatabase!=0 || sqlite3BtreeHoldsAllMutexes(db) ); +#if SQLITE_USER_AUTHENTICATION + /* Only the admin user is allowed to know that the sqlite_user table + ** exists */ + if( db->auth.authLevelnDb; i++){ + int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ + if( zDatabase!=0 && sqlite3StrICmp(zDatabase, db->aDb[j].zName) ) continue; + assert( sqlite3SchemaMutexHeld(db, j, 0) ); + p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName); + if( p ) break; + } + return p; } /* -** Generate code for a BETWEEN operator. -** -** x BETWEEN y AND z -** -** The above is equivalent to -** -** x>=y AND x<=z +** Locate the in-memory structure that describes a particular database +** table given the name of that table and (optionally) the name of the +** database containing the table. Return NULL if not found. Also leave an +** error message in pParse->zErrMsg. ** -** Code it as such, taking care to do the common subexpression -** elementation of x. +** The difference between this routine and sqlite3FindTable() is that this +** routine leaves an error message in pParse->zErrMsg where +** sqlite3FindTable() does not. */ -static void exprCodeBetween( - Parse *pParse, /* Parsing and code generating context */ - Expr *pExpr, /* The BETWEEN expression */ - int dest, /* Jump here if the jump is taken */ - int jumpIfTrue, /* Take the jump if the BETWEEN is true */ - int jumpIfNull /* Take the jump if the BETWEEN is NULL */ +SQLITE_PRIVATE Table *sqlite3LocateTable( + Parse *pParse, /* context in which to report errors */ + int isView, /* True if looking for a VIEW rather than a TABLE */ + const char *zName, /* Name of the table we are looking for */ + const char *zDbase /* Name of the database. Might be NULL */ ){ - Expr exprAnd; /* The AND operator in x>=y AND x<=z */ - Expr compLeft; /* The x>=y term */ - Expr compRight; /* The x<=z term */ - Expr exprX; /* The x subexpression */ - int regFree1 = 0; /* Temporary use register */ + Table *p; - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - exprX = *pExpr->pLeft; - exprAnd.op = TK_AND; - exprAnd.pLeft = &compLeft; - exprAnd.pRight = &compRight; - compLeft.op = TK_GE; - compLeft.pLeft = &exprX; - compLeft.pRight = pExpr->x.pList->a[0].pExpr; - compRight.op = TK_LE; - compRight.pLeft = &exprX; - compRight.pRight = pExpr->x.pList->a[1].pExpr; - exprX.iTable = sqlite3ExprCodeTemp(pParse, &exprX, ®Free1); - exprX.op = TK_REGISTER; - if( jumpIfTrue ){ - sqlite3ExprIfTrue(pParse, &exprAnd, dest, jumpIfNull); - }else{ - sqlite3ExprIfFalse(pParse, &exprAnd, dest, jumpIfNull); + /* Read the database schema. If an error occurs, leave an error message + ** and code in pParse and return NULL. */ + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + return 0; } - sqlite3ReleaseTempReg(pParse, regFree1); - /* Ensure adequate test coverage */ - testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1==0 ); - testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1!=0 ); - testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1==0 ); - testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1!=0 ); - testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1==0 ); - testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1!=0 ); - testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1==0 ); - testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1!=0 ); + p = sqlite3FindTable(pParse->db, zName, zDbase); + if( p==0 ){ + const char *zMsg = isView ? "no such view" : "no such table"; + if( zDbase ){ + sqlite3ErrorMsg(pParse, "%s: %s.%s", zMsg, zDbase, zName); + }else{ + sqlite3ErrorMsg(pParse, "%s: %s", zMsg, zName); + } + pParse->checkSchema = 1; + } +#if SQLITE_USER_AUTHENICATION + else if( pParse->db->auth.authLevelpSchema) if it is not NULL. p->pSchema may be +** non-NULL if it is part of a view or trigger program definition. See +** sqlite3FixSrcList() for details. */ -SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse *pParse, Expr *pExpr, int dest, int jumpIfNull){ - Vdbe *v = pParse->pVdbe; - int op = 0; - int regFree1 = 0; - int regFree2 = 0; - int r1, r2; - - assert( jumpIfNull==SQLITE_JUMPIFNULL || jumpIfNull==0 ); - if( NEVER(v==0) ) return; /* Existance of VDBE checked by caller */ - if( NEVER(pExpr==0) ) return; /* No way this can happen */ - op = pExpr->op; - switch( op ){ - case TK_AND: { - int d2 = sqlite3VdbeMakeLabel(v); - testcase( jumpIfNull==0 ); - sqlite3ExprCachePush(pParse); - sqlite3ExprIfFalse(pParse, pExpr->pLeft, d2,jumpIfNull^SQLITE_JUMPIFNULL); - sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse, 1); - break; - } - case TK_OR: { - testcase( jumpIfNull==0 ); - sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); - sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); - break; - } - case TK_NOT: { - testcase( jumpIfNull==0 ); - sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); - break; - } - case TK_LT: - case TK_LE: - case TK_GT: - case TK_GE: - case TK_NE: - case TK_EQ: { - assert( TK_LT==OP_Lt ); - assert( TK_LE==OP_Le ); - assert( TK_GT==OP_Gt ); - assert( TK_GE==OP_Ge ); - assert( TK_EQ==OP_Eq ); - assert( TK_NE==OP_Ne ); - testcase( op==TK_LT ); - testcase( op==TK_LE ); - testcase( op==TK_GT ); - testcase( op==TK_GE ); - testcase( op==TK_EQ ); - testcase( op==TK_NE ); - testcase( jumpIfNull==0 ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, dest, jumpIfNull); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; - } - case TK_IS: - case TK_ISNOT: { - testcase( op==TK_IS ); - testcase( op==TK_ISNOT ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - op = (op==TK_IS) ? TK_EQ : TK_NE; - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, dest, SQLITE_NULLEQ); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; - } - case TK_ISNULL: - case TK_NOTNULL: { - assert( TK_ISNULL==OP_IsNull ); - assert( TK_NOTNULL==OP_NotNull ); - testcase( op==TK_ISNULL ); - testcase( op==TK_NOTNULL ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - sqlite3VdbeAddOp2(v, op, r1, dest); - testcase( regFree1==0 ); - break; - } - case TK_BETWEEN: { - testcase( jumpIfNull==0 ); - exprCodeBetween(pParse, pExpr, dest, 1, jumpIfNull); - break; - } -#ifndef SQLITE_OMIT_SUBQUERY - case TK_IN: { - int destIfFalse = sqlite3VdbeMakeLabel(v); - int destIfNull = jumpIfNull ? dest : destIfFalse; - sqlite3ExprCodeIN(pParse, pExpr, destIfFalse, destIfNull); - sqlite3VdbeAddOp2(v, OP_Goto, 0, dest); - sqlite3VdbeResolveLabel(v, destIfFalse); - break; - } -#endif - default: { - r1 = sqlite3ExprCodeTemp(pParse, pExpr, ®Free1); - sqlite3VdbeAddOp3(v, OP_If, r1, dest, jumpIfNull!=0); - testcase( regFree1==0 ); - testcase( jumpIfNull==0 ); - break; - } +SQLITE_PRIVATE Table *sqlite3LocateTableItem( + Parse *pParse, + int isView, + struct SrcList_item *p +){ + const char *zDb; + assert( p->pSchema==0 || p->zDatabase==0 ); + if( p->pSchema ){ + int iDb = sqlite3SchemaToIndex(pParse->db, p->pSchema); + zDb = pParse->db->aDb[iDb].zName; + }else{ + zDb = p->zDatabase; } - sqlite3ReleaseTempReg(pParse, regFree1); - sqlite3ReleaseTempReg(pParse, regFree2); + return sqlite3LocateTable(pParse, isView, p->zName, zDb); } /* -** Generate code for a boolean expression such that a jump is made -** to the label "dest" if the expression is false but execution -** continues straight thru if the expression is true. +** Locate the in-memory structure that describes +** a particular index given the name of that index +** and the name of the database that contains the index. +** Return NULL if not found. ** -** If the expression evaluates to NULL (neither true nor false) then -** jump if jumpIfNull is SQLITE_JUMPIFNULL or fall through if jumpIfNull -** is 0. +** If zDatabase is 0, all databases are searched for the +** table and the first matching index is returned. (No checking +** for duplicate index names is done.) The search order is +** TEMP first, then MAIN, then any auxiliary databases added +** using the ATTACH command. */ -SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse *pParse, Expr *pExpr, int dest, int jumpIfNull){ - Vdbe *v = pParse->pVdbe; - int op = 0; - int regFree1 = 0; - int regFree2 = 0; - int r1, r2; - - assert( jumpIfNull==SQLITE_JUMPIFNULL || jumpIfNull==0 ); - if( NEVER(v==0) ) return; /* Existance of VDBE checked by caller */ - if( pExpr==0 ) return; +SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3 *db, const char *zName, const char *zDb){ + Index *p = 0; + int i; + /* All mutexes are required for schema access. Make sure we hold them. */ + assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) ); + for(i=OMIT_TEMPDB; inDb; i++){ + int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ + Schema *pSchema = db->aDb[j].pSchema; + assert( pSchema ); + if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zName) ) continue; + assert( sqlite3SchemaMutexHeld(db, j, 0) ); + p = sqlite3HashFind(&pSchema->idxHash, zName); + if( p ) break; + } + return p; +} - /* The value of pExpr->op and op are related as follows: - ** - ** pExpr->op op - ** --------- ---------- - ** TK_ISNULL OP_NotNull - ** TK_NOTNULL OP_IsNull - ** TK_NE OP_Eq - ** TK_EQ OP_Ne - ** TK_GT OP_Le - ** TK_LE OP_Gt - ** TK_GE OP_Lt - ** TK_LT OP_Ge - ** - ** For other values of pExpr->op, op is undefined and unused. - ** The value of TK_ and OP_ constants are arranged such that we - ** can compute the mapping above using the following expression. - ** Assert()s verify that the computation is correct. - */ - op = ((pExpr->op+(TK_ISNULL&1))^1)-(TK_ISNULL&1); +/* +** Reclaim the memory used by an index +*/ +static void freeIndex(sqlite3 *db, Index *p){ +#ifndef SQLITE_OMIT_ANALYZE + sqlite3DeleteIndexSamples(db, p); +#endif + if( db==0 || db->pnBytesFreed==0 ) sqlite3KeyInfoUnref(p->pKeyInfo); + sqlite3ExprDelete(db, p->pPartIdxWhere); + sqlite3DbFree(db, p->zColAff); + if( p->isResized ) sqlite3DbFree(db, p->azColl); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3_free(p->aiRowEst); +#endif + sqlite3DbFree(db, p); +} - /* Verify correct alignment of TK_ and OP_ constants - */ - assert( pExpr->op!=TK_ISNULL || op==OP_NotNull ); - assert( pExpr->op!=TK_NOTNULL || op==OP_IsNull ); - assert( pExpr->op!=TK_NE || op==OP_Eq ); - assert( pExpr->op!=TK_EQ || op==OP_Ne ); - assert( pExpr->op!=TK_LT || op==OP_Ge ); - assert( pExpr->op!=TK_LE || op==OP_Gt ); - assert( pExpr->op!=TK_GT || op==OP_Le ); - assert( pExpr->op!=TK_GE || op==OP_Lt ); +/* +** For the index called zIdxName which is found in the database iDb, +** unlike that index from its Table then remove the index from +** the index hash table and free all memory structures associated +** with the index. +*/ +SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3 *db, int iDb, const char *zIdxName){ + Index *pIndex; + Hash *pHash; - switch( pExpr->op ){ - case TK_AND: { - testcase( jumpIfNull==0 ); - sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); - sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); - break; - } - case TK_OR: { - int d2 = sqlite3VdbeMakeLabel(v); - testcase( jumpIfNull==0 ); - sqlite3ExprCachePush(pParse); - sqlite3ExprIfTrue(pParse, pExpr->pLeft, d2, jumpIfNull^SQLITE_JUMPIFNULL); - sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse, 1); - break; - } - case TK_NOT: { - testcase( jumpIfNull==0 ); - sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); - break; - } - case TK_LT: - case TK_LE: - case TK_GT: - case TK_GE: - case TK_NE: - case TK_EQ: { - testcase( op==TK_LT ); - testcase( op==TK_LE ); - testcase( op==TK_GT ); - testcase( op==TK_GE ); - testcase( op==TK_EQ ); - testcase( op==TK_NE ); - testcase( jumpIfNull==0 ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, dest, jumpIfNull); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; - } - case TK_IS: - case TK_ISNOT: { - testcase( pExpr->op==TK_IS ); - testcase( pExpr->op==TK_ISNOT ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2); - op = (pExpr->op==TK_IS) ? TK_NE : TK_EQ; - codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op, - r1, r2, dest, SQLITE_NULLEQ); - testcase( regFree1==0 ); - testcase( regFree2==0 ); - break; - } - case TK_ISNULL: - case TK_NOTNULL: { - testcase( op==TK_ISNULL ); - testcase( op==TK_NOTNULL ); - r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); - sqlite3VdbeAddOp2(v, op, r1, dest); - testcase( regFree1==0 ); - break; - } - case TK_BETWEEN: { - testcase( jumpIfNull==0 ); - exprCodeBetween(pParse, pExpr, dest, 0, jumpIfNull); - break; - } -#ifndef SQLITE_OMIT_SUBQUERY - case TK_IN: { - if( jumpIfNull ){ - sqlite3ExprCodeIN(pParse, pExpr, dest, dest); - }else{ - int destIfNull = sqlite3VdbeMakeLabel(v); - sqlite3ExprCodeIN(pParse, pExpr, dest, destIfNull); - sqlite3VdbeResolveLabel(v, destIfNull); + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pHash = &db->aDb[iDb].pSchema->idxHash; + pIndex = sqlite3HashInsert(pHash, zIdxName, 0); + if( ALWAYS(pIndex) ){ + if( pIndex->pTable->pIndex==pIndex ){ + pIndex->pTable->pIndex = pIndex->pNext; + }else{ + Index *p; + /* Justification of ALWAYS(); The index must be on the list of + ** indices. */ + p = pIndex->pTable->pIndex; + while( ALWAYS(p) && p->pNext!=pIndex ){ p = p->pNext; } + if( ALWAYS(p && p->pNext==pIndex) ){ + p->pNext = pIndex->pNext; } - break; - } -#endif - default: { - r1 = sqlite3ExprCodeTemp(pParse, pExpr, ®Free1); - sqlite3VdbeAddOp3(v, OP_IfNot, r1, dest, jumpIfNull!=0); - testcase( regFree1==0 ); - testcase( jumpIfNull==0 ); - break; } + freeIndex(db, pIndex); } - sqlite3ReleaseTempReg(pParse, regFree1); - sqlite3ReleaseTempReg(pParse, regFree2); + db->flags |= SQLITE_InternChanges; } /* -** Do a deep comparison of two expression trees. Return 0 if the two -** expressions are completely identical. Return 1 if they differ only -** by a COLLATE operator at the top level. Return 2 if there are differences -** other than the top-level COLLATE operator. +** Look through the list of open database files in db->aDb[] and if +** any have been closed, remove them from the list. Reallocate the +** db->aDb[] structure to a smaller size, if possible. ** -** Sometimes this routine will return 2 even if the two expressions -** really are equivalent. If we cannot prove that the expressions are -** identical, we return 2 just to be safe. So if this routine -** returns 2, then you do not really know for certain if the two -** expressions are the same. But if you get a 0 or 1 return, then you -** can be sure the expressions are the same. In the places where -** this routine is used, it does not hurt to get an extra 2 - that -** just might result in some slightly slower code. But returning -** an incorrect 0 or 1 could lead to a malfunction. +** Entry 0 (the "main" database) and entry 1 (the "temp" database) +** are never candidates for being collapsed. */ -SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB){ - if( pA==0||pB==0 ){ - return pB==pA ? 0 : 2; - } - assert( !ExprHasAnyProperty(pA, EP_TokenOnly|EP_Reduced) ); - assert( !ExprHasAnyProperty(pB, EP_TokenOnly|EP_Reduced) ); - if( ExprHasProperty(pA, EP_xIsSelect) || ExprHasProperty(pB, EP_xIsSelect) ){ - return 2; - } - if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2; - if( pA->op!=pB->op ) return 2; - if( sqlite3ExprCompare(pA->pLeft, pB->pLeft) ) return 2; - if( sqlite3ExprCompare(pA->pRight, pB->pRight) ) return 2; - if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList) ) return 2; - if( pA->iTable!=pB->iTable || pA->iColumn!=pB->iColumn ) return 2; - if( ExprHasProperty(pA, EP_IntValue) ){ - if( !ExprHasProperty(pB, EP_IntValue) || pA->u.iValue!=pB->u.iValue ){ - return 2; +SQLITE_PRIVATE void sqlite3CollapseDatabaseArray(sqlite3 *db){ + int i, j; + for(i=j=2; inDb; i++){ + struct Db *pDb = &db->aDb[i]; + if( pDb->pBt==0 ){ + sqlite3DbFree(db, pDb->zName); + pDb->zName = 0; + continue; } - }else if( pA->op!=TK_COLUMN && pA->u.zToken ){ - if( ExprHasProperty(pB, EP_IntValue) || NEVER(pB->u.zToken==0) ) return 2; - if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ){ - return 2; + if( jaDb[j] = db->aDb[i]; } + j++; + } + memset(&db->aDb[j], 0, (db->nDb-j)*sizeof(db->aDb[j])); + db->nDb = j; + if( db->nDb<=2 && db->aDb!=db->aDbStatic ){ + memcpy(db->aDbStatic, db->aDb, 2*sizeof(db->aDb[0])); + sqlite3DbFree(db, db->aDb); + db->aDb = db->aDbStatic; } - if( (pA->flags & EP_ExpCollate)!=(pB->flags & EP_ExpCollate) ) return 1; - if( (pA->flags & EP_ExpCollate)!=0 && pA->pColl!=pB->pColl ) return 2; - return 0; } /* -** Compare two ExprList objects. Return 0 if they are identical and -** non-zero if they differ in any way. -** -** This routine might return non-zero for equivalent ExprLists. The -** only consequence will be disabled optimizations. But this routine -** must never return 0 if the two ExprList objects are different, or -** a malfunction will result. -** -** Two NULL pointers are considered to be the same. But a NULL pointer -** always differs from a non-NULL pointer. +** Reset the schema for the database at index iDb. Also reset the +** TEMP schema. */ -SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList *pA, ExprList *pB){ - int i; - if( pA==0 && pB==0 ) return 0; - if( pA==0 || pB==0 ) return 1; - if( pA->nExpr!=pB->nExpr ) return 1; - for(i=0; inExpr; i++){ - Expr *pExprA = pA->a[i].pExpr; - Expr *pExprB = pB->a[i].pExpr; - if( pA->a[i].sortOrder!=pB->a[i].sortOrder ) return 1; - if( sqlite3ExprCompare(pExprA, pExprB) ) return 1; +SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3 *db, int iDb){ + Db *pDb; + assert( iDbnDb ); + + /* Case 1: Reset the single schema identified by iDb */ + pDb = &db->aDb[iDb]; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + assert( pDb->pSchema!=0 ); + sqlite3SchemaClear(pDb->pSchema); + + /* If any database other than TEMP is reset, then also reset TEMP + ** since TEMP might be holding triggers that reference tables in the + ** other database. + */ + if( iDb!=1 ){ + pDb = &db->aDb[1]; + assert( pDb->pSchema!=0 ); + sqlite3SchemaClear(pDb->pSchema); } - return 0; + return; } /* -** Add a new element to the pAggInfo->aCol[] array. Return the index of -** the new element. Return a negative number if malloc fails. +** Erase all schema information from all attached databases (including +** "main" and "temp") for a single database connection. */ -static int addAggInfoColumn(sqlite3 *db, AggInfo *pInfo){ +SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3 *db){ int i; - pInfo->aCol = sqlite3ArrayAllocate( - db, - pInfo->aCol, - sizeof(pInfo->aCol[0]), - 3, - &pInfo->nColumn, - &pInfo->nColumnAlloc, - &i - ); - return i; -} + sqlite3BtreeEnterAll(db); + for(i=0; inDb; i++){ + Db *pDb = &db->aDb[i]; + if( pDb->pSchema ){ + sqlite3SchemaClear(pDb->pSchema); + } + } + db->flags &= ~SQLITE_InternChanges; + sqlite3VtabUnlockList(db); + sqlite3BtreeLeaveAll(db); + sqlite3CollapseDatabaseArray(db); +} /* -** Add a new element to the pAggInfo->aFunc[] array. Return the index of -** the new element. Return a negative number if malloc fails. +** This routine is called when a commit occurs. */ -static int addAggInfoFunc(sqlite3 *db, AggInfo *pInfo){ - int i; - pInfo->aFunc = sqlite3ArrayAllocate( - db, - pInfo->aFunc, - sizeof(pInfo->aFunc[0]), - 3, - &pInfo->nFunc, - &pInfo->nFuncAlloc, - &i - ); - return i; -} +SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){ + db->flags &= ~SQLITE_InternChanges; +} /* -** This is the xExprCallback for a tree walker. It is used to -** implement sqlite3ExprAnalyzeAggregates(). See sqlite3ExprAnalyzeAggregates -** for additional information. +** Delete memory allocated for the column names of a table or view (the +** Table.aCol[] array). */ -static int analyzeAggregate(Walker *pWalker, Expr *pExpr){ +static void sqliteDeleteColumnNames(sqlite3 *db, Table *pTable){ int i; - NameContext *pNC = pWalker->u.pNC; - Parse *pParse = pNC->pParse; - SrcList *pSrcList = pNC->pSrcList; - AggInfo *pAggInfo = pNC->pAggInfo; - - switch( pExpr->op ){ - case TK_AGG_COLUMN: - case TK_COLUMN: { - testcase( pExpr->op==TK_AGG_COLUMN ); - testcase( pExpr->op==TK_COLUMN ); - /* Check to see if the column is in one of the tables in the FROM - ** clause of the aggregate query */ - if( ALWAYS(pSrcList!=0) ){ - struct SrcList_item *pItem = pSrcList->a; - for(i=0; inSrc; i++, pItem++){ - struct AggInfo_col *pCol; - assert( !ExprHasAnyProperty(pExpr, EP_TokenOnly|EP_Reduced) ); - if( pExpr->iTable==pItem->iCursor ){ - /* If we reach this point, it means that pExpr refers to a table - ** that is in the FROM clause of the aggregate query. - ** - ** Make an entry for the column in pAggInfo->aCol[] if there - ** is not an entry there already. - */ - int k; - pCol = pAggInfo->aCol; - for(k=0; knColumn; k++, pCol++){ - if( pCol->iTable==pExpr->iTable && - pCol->iColumn==pExpr->iColumn ){ - break; - } - } - if( (k>=pAggInfo->nColumn) - && (k = addAggInfoColumn(pParse->db, pAggInfo))>=0 - ){ - pCol = &pAggInfo->aCol[k]; - pCol->pTab = pExpr->pTab; - pCol->iTable = pExpr->iTable; - pCol->iColumn = pExpr->iColumn; - pCol->iMem = ++pParse->nMem; - pCol->iSorterColumn = -1; - pCol->pExpr = pExpr; - if( pAggInfo->pGroupBy ){ - int j, n; - ExprList *pGB = pAggInfo->pGroupBy; - struct ExprList_item *pTerm = pGB->a; - n = pGB->nExpr; - for(j=0; jpExpr; - if( pE->op==TK_COLUMN && pE->iTable==pExpr->iTable && - pE->iColumn==pExpr->iColumn ){ - pCol->iSorterColumn = j; - break; - } - } - } - if( pCol->iSorterColumn<0 ){ - pCol->iSorterColumn = pAggInfo->nSortingColumn++; - } - } - /* There is now an entry for pExpr in pAggInfo->aCol[] (either - ** because it was there before or because we just created it). - ** Convert the pExpr to be a TK_AGG_COLUMN referring to that - ** pAggInfo->aCol[] entry. - */ - ExprSetIrreducible(pExpr); - pExpr->pAggInfo = pAggInfo; - pExpr->op = TK_AGG_COLUMN; - pExpr->iAgg = (i16)k; - break; - } /* endif pExpr->iTable==pItem->iCursor */ - } /* end loop over pSrcList */ - } - return WRC_Prune; - } - case TK_AGG_FUNCTION: { - /* The pNC->nDepth==0 test causes aggregate functions in subqueries - ** to be ignored */ - if( pNC->nDepth==0 ){ - /* Check to see if pExpr is a duplicate of another aggregate - ** function that is already in the pAggInfo structure - */ - struct AggInfo_func *pItem = pAggInfo->aFunc; - for(i=0; inFunc; i++, pItem++){ - if( sqlite3ExprCompare(pItem->pExpr, pExpr)==0 ){ - break; - } - } - if( i>=pAggInfo->nFunc ){ - /* pExpr is original. Make a new entry in pAggInfo->aFunc[] - */ - u8 enc = ENC(pParse->db); - i = addAggInfoFunc(pParse->db, pAggInfo); - if( i>=0 ){ - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - pItem = &pAggInfo->aFunc[i]; - pItem->pExpr = pExpr; - pItem->iMem = ++pParse->nMem; - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - pItem->pFunc = sqlite3FindFunction(pParse->db, - pExpr->u.zToken, sqlite3Strlen30(pExpr->u.zToken), - pExpr->x.pList ? pExpr->x.pList->nExpr : 0, enc, 0); - if( pExpr->flags & EP_Distinct ){ - pItem->iDistinct = pParse->nTab++; - }else{ - pItem->iDistinct = -1; - } - } - } - /* Make pExpr point to the appropriate pAggInfo->aFunc[] entry - */ - assert( !ExprHasAnyProperty(pExpr, EP_TokenOnly|EP_Reduced) ); - ExprSetIrreducible(pExpr); - pExpr->iAgg = (i16)i; - pExpr->pAggInfo = pAggInfo; - return WRC_Prune; - } + Column *pCol; + assert( pTable!=0 ); + if( (pCol = pTable->aCol)!=0 ){ + for(i=0; inCol; i++, pCol++){ + sqlite3DbFree(db, pCol->zName); + sqlite3ExprDelete(db, pCol->pDflt); + sqlite3DbFree(db, pCol->zDflt); + sqlite3DbFree(db, pCol->zType); + sqlite3DbFree(db, pCol->zColl); } + sqlite3DbFree(db, pTable->aCol); } - return WRC_Continue; } -static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){ - NameContext *pNC = pWalker->u.pNC; - if( pNC->nDepth==0 ){ - pNC->nDepth++; - sqlite3WalkSelect(pWalker, pSelect); - pNC->nDepth--; - return WRC_Prune; - }else{ - return WRC_Continue; + +/* +** Remove the memory data structures associated with the given +** Table. No changes are made to disk by this routine. +** +** This routine just deletes the data structure. It does not unlink +** the table data structure from the hash table. But it does destroy +** memory structures of the indices and foreign keys associated with +** the table. +** +** The db parameter is optional. It is needed if the Table object +** contains lookaside memory. (Table objects in the schema do not use +** lookaside memory, but some ephemeral Table objects do.) Or the +** db parameter can be used with db->pnBytesFreed to measure the memory +** used by the Table object. +*/ +SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){ + Index *pIndex, *pNext; + TESTONLY( int nLookaside; ) /* Used to verify lookaside not used for schema */ + + assert( !pTable || pTable->nRef>0 ); + + /* Do not delete the table until the reference count reaches zero. */ + if( !pTable ) return; + if( ((!db || db->pnBytesFreed==0) && (--pTable->nRef)>0) ) return; + + /* Record the number of outstanding lookaside allocations in schema Tables + ** prior to doing any free() operations. Since schema Tables do not use + ** lookaside, this number should not change. */ + TESTONLY( nLookaside = (db && (pTable->tabFlags & TF_Ephemeral)==0) ? + db->lookaside.nOut : 0 ); + + /* Delete all indices associated with this table. */ + for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){ + pNext = pIndex->pNext; + assert( pIndex->pSchema==pTable->pSchema ); + if( !db || db->pnBytesFreed==0 ){ + char *zName = pIndex->zName; + TESTONLY ( Index *pOld = ) sqlite3HashInsert( + &pIndex->pSchema->idxHash, zName, 0 + ); + assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); + assert( pOld==pIndex || pOld==0 ); + } + freeIndex(db, pIndex); } + + /* Delete any foreign keys attached to this table. */ + sqlite3FkDelete(db, pTable); + + /* Delete the Table structure itself. + */ + sqliteDeleteColumnNames(db, pTable); + sqlite3DbFree(db, pTable->zName); + sqlite3DbFree(db, pTable->zColAff); + sqlite3SelectDelete(db, pTable->pSelect); +#ifndef SQLITE_OMIT_CHECK + sqlite3ExprListDelete(db, pTable->pCheck); +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + sqlite3VtabClear(db, pTable); +#endif + sqlite3DbFree(db, pTable); + + /* Verify that no lookaside memory was used by schema tables */ + assert( nLookaside==0 || nLookaside==db->lookaside.nOut ); } /* -** Analyze the given expression looking for aggregate functions and -** for variables that need to be added to the pParse->aAgg[] array. -** Make additional entries to the pParse->aAgg[] array as necessary. -** -** This routine should only be called after the expression has been -** analyzed by sqlite3ResolveExprNames(). +** Unlink the given table from the hash tables and the delete the +** table structure with all its indices and foreign keys. */ -SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){ - Walker w; - w.xExprCallback = analyzeAggregate; - w.xSelectCallback = analyzeAggregatesInSelect; - w.u.pNC = pNC; - assert( pNC->pSrcList!=0 ); - sqlite3WalkExpr(&w, pExpr); +SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3 *db, int iDb, const char *zTabName){ + Table *p; + Db *pDb; + + assert( db!=0 ); + assert( iDb>=0 && iDbnDb ); + assert( zTabName ); + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + testcase( zTabName[0]==0 ); /* Zero-length table names are allowed */ + pDb = &db->aDb[iDb]; + p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, 0); + sqlite3DeleteTable(db, p); + db->flags |= SQLITE_InternChanges; } /* -** Call sqlite3ExprAnalyzeAggregates() for every expression in an -** expression list. Return the number of errors. +** Given a token, return a string that consists of the text of that +** token. Space to hold the returned string +** is obtained from sqliteMalloc() and must be freed by the calling +** function. ** -** If an error is found, the analysis is cut short. -*/ -SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext *pNC, ExprList *pList){ - struct ExprList_item *pItem; - int i; - if( pList ){ - for(pItem=pList->a, i=0; inExpr; i++, pItem++){ - sqlite3ExprAnalyzeAggregates(pNC, pItem->pExpr); - } +** Any quotation marks (ex: "name", 'name', [name], or `name`) that +** surround the body of the token are removed. +** +** Tokens are often just pointers into the original SQL text and so +** are not \000 terminated and are not persistent. The returned string +** is \000 terminated and is persistent. +*/ +SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3 *db, Token *pName){ + char *zName; + if( pName ){ + zName = sqlite3DbStrNDup(db, (char*)pName->z, pName->n); + sqlite3Dequote(zName); + }else{ + zName = 0; } + return zName; } /* -** Allocate a single new register for use to hold some intermediate result. +** Open the sqlite_master table stored in database number iDb for +** writing. The table is opened using cursor 0. */ -SQLITE_PRIVATE int sqlite3GetTempReg(Parse *pParse){ - if( pParse->nTempReg==0 ){ - return ++pParse->nMem; +SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *p, int iDb){ + Vdbe *v = sqlite3GetVdbe(p); + sqlite3TableLock(p, iDb, MASTER_ROOT, 1, SCHEMA_TABLE(iDb)); + sqlite3VdbeAddOp4Int(v, OP_OpenWrite, 0, MASTER_ROOT, iDb, 5); + if( p->nTab==0 ){ + p->nTab = 1; } - return pParse->aTempReg[--pParse->nTempReg]; } /* -** Deallocate a register, making available for reuse for some other -** purpose. -** -** If a register is currently being used by the column cache, then -** the dallocation is deferred until the column cache line that uses -** the register becomes stale. +** Parameter zName points to a nul-terminated buffer containing the name +** of a database ("main", "temp" or the name of an attached db). This +** function returns the index of the named database in db->aDb[], or +** -1 if the named db cannot be found. */ -SQLITE_PRIVATE void sqlite3ReleaseTempReg(Parse *pParse, int iReg){ - if( iReg && pParse->nTempRegaTempReg) ){ - int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; iiReg==iReg ){ - p->tempReg = 1; - return; +SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *db, const char *zName){ + int i = -1; /* Database number */ + if( zName ){ + Db *pDb; + int n = sqlite3Strlen30(zName); + for(i=(db->nDb-1), pDb=&db->aDb[i]; i>=0; i--, pDb--){ + if( (!OMIT_TEMPDB || i!=1 ) && n==sqlite3Strlen30(pDb->zName) && + 0==sqlite3StrICmp(pDb->zName, zName) ){ + break; } } - pParse->aTempReg[pParse->nTempReg++] = iReg; } + return i; } /* -** Allocate or deallocate a block of nReg consecutive registers +** The token *pName contains the name of a database (either "main" or +** "temp" or the name of an attached db). This routine returns the +** index of the named database in db->aDb[], or -1 if the named db +** does not exist. */ -SQLITE_PRIVATE int sqlite3GetTempRange(Parse *pParse, int nReg){ - int i, n; - i = pParse->iRangeReg; - n = pParse->nRangeReg; - if( nReg<=n ){ - assert( !usedAsColumnCache(pParse, i, i+n-1) ); - pParse->iRangeReg += nReg; - pParse->nRangeReg -= nReg; - }else{ - i = pParse->nMem+1; - pParse->nMem += nReg; - } +SQLITE_PRIVATE int sqlite3FindDb(sqlite3 *db, Token *pName){ + int i; /* Database number */ + char *zName; /* Name we are searching for */ + zName = sqlite3NameFromToken(db, pName); + i = sqlite3FindDbName(db, zName); + sqlite3DbFree(db, zName); return i; } -SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse *pParse, int iReg, int nReg){ - sqlite3ExprCacheRemove(pParse, iReg, nReg); - if( nReg>pParse->nRangeReg ){ - pParse->nRangeReg = nReg; - pParse->iRangeReg = iReg; - } -} -/************** End of expr.c ************************************************/ -/************** Begin file alter.c *******************************************/ -/* -** 2005 February 15 +/* The table or view or trigger name is passed to this routine via tokens +** pName1 and pName2. If the table name was fully qualified, for example: ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** CREATE TABLE xxx.yyy (...); +** +** Then pName1 is set to "xxx" and pName2 "yyy". On the other hand if +** the table name is not fully qualified, i.e.: ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** CREATE TABLE yyy(...); ** -************************************************************************* -** This file contains C code routines that used to generate VDBE code -** that implements the ALTER TABLE command. +** Then pName1 is set to "yyy" and pName2 is "". +** +** This routine sets the *ppUnqual pointer to point at the token (pName1 or +** pName2) that stores the unqualified table name. The index of the +** database "xxx" is returned. */ +SQLITE_PRIVATE int sqlite3TwoPartName( + Parse *pParse, /* Parsing and code generating context */ + Token *pName1, /* The "xxx" in the name "xxx.yyy" or "xxx" */ + Token *pName2, /* The "yyy" in the name "xxx.yyy" */ + Token **pUnqual /* Write the unqualified object name here */ +){ + int iDb; /* Database holding the object */ + sqlite3 *db = pParse->db; + + if( ALWAYS(pName2!=0) && pName2->n>0 ){ + if( db->init.busy ) { + sqlite3ErrorMsg(pParse, "corrupt database"); + pParse->nErr++; + return -1; + } + *pUnqual = pName2; + iDb = sqlite3FindDb(db, pName1); + if( iDb<0 ){ + sqlite3ErrorMsg(pParse, "unknown database %T", pName1); + pParse->nErr++; + return -1; + } + }else{ + assert( db->init.iDb==0 || db->init.busy ); + iDb = db->init.iDb; + *pUnqual = pName1; + } + return iDb; +} /* -** The code in this file only exists if we are not omitting the -** ALTER TABLE logic from the build. +** This routine is used to check if the UTF-8 string zName is a legal +** unqualified name for a new schema object (table, index, view or +** trigger). All names are legal except those that begin with the string +** "sqlite_" (in upper, lower or mixed case). This portion of the namespace +** is reserved for internal use. */ -#ifndef SQLITE_OMIT_ALTERTABLE - +SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *pParse, const char *zName){ + if( !pParse->db->init.busy && pParse->nested==0 + && (pParse->db->flags & SQLITE_WriteSchema)==0 + && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ + sqlite3ErrorMsg(pParse, "object name reserved for internal use: %s", zName); + return SQLITE_ERROR; + } + return SQLITE_OK; +} /* -** This function is used by SQL generated to implement the -** ALTER TABLE command. The first argument is the text of a CREATE TABLE or -** CREATE INDEX command. The second is a table name. The table name in -** the CREATE TABLE or CREATE INDEX statement is replaced with the third -** argument and the result returned. Examples: -** -** sqlite_rename_table('CREATE TABLE abc(a, b, c)', 'def') -** -> 'CREATE TABLE def(a, b, c)' -** -** sqlite_rename_table('CREATE INDEX i ON abc(a)', 'def') -** -> 'CREATE INDEX i ON def(a, b, c)' +** Return the PRIMARY KEY index of a table */ -static void renameTableFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - unsigned char const *zSql = sqlite3_value_text(argv[0]); - unsigned char const *zTableName = sqlite3_value_text(argv[1]); - - int token; - Token tname; - unsigned char const *zCsr = zSql; - int len = 0; - char *zRet; - - sqlite3 *db = sqlite3_context_db_handle(context); - - UNUSED_PARAMETER(NotUsed); - - /* The principle used to locate the table name in the CREATE TABLE - ** statement is that the table name is the first non-space token that - ** is immediately followed by a TK_LP or TK_USING token. - */ - if( zSql ){ - do { - if( !*zCsr ){ - /* Ran out of input before finding an opening bracket. Return NULL. */ - return; - } - - /* Store the token that zCsr points to in tname. */ - tname.z = (char*)zCsr; - tname.n = len; - - /* Advance zCsr to the next token. Store that token type in 'token', - ** and its length in 'len' (to be used next iteration of this loop). - */ - do { - zCsr += len; - len = sqlite3GetToken(zCsr, &token); - } while( token==TK_SPACE ); - assert( len>0 ); - } while( token!=TK_LP && token!=TK_USING ); +SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table *pTab){ + Index *p; + for(p=pTab->pIndex; p && !IsPrimaryKeyIndex(p); p=p->pNext){} + return p; +} - zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", ((u8*)tname.z) - zSql, zSql, - zTableName, tname.z+tname.n); - sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); +/* +** Return the column of index pIdx that corresponds to table +** column iCol. Return -1 if not found. +*/ +SQLITE_PRIVATE i16 sqlite3ColumnOfIndex(Index *pIdx, i16 iCol){ + int i; + for(i=0; inColumn; i++){ + if( iCol==pIdx->aiColumn[i] ) return i; } + return -1; } /* -** This C function implements an SQL user function that is used by SQL code -** generated by the ALTER TABLE ... RENAME command to modify the definition -** of any foreign key constraints that use the table being renamed as the -** parent table. It is passed three arguments: -** -** 1) The complete text of the CREATE TABLE statement being modified, -** 2) The old name of the table being renamed, and -** 3) The new name of the table being renamed. -** -** It returns the new CREATE TABLE statement. For example: +** Begin constructing a new table representation in memory. This is +** the first of several action routines that get called in response +** to a CREATE TABLE statement. In particular, this routine is called +** after seeing tokens "CREATE" and "TABLE" and the table name. The isTemp +** flag is true if the table should be stored in the auxiliary database +** file instead of in the main database file. This is normally the case +** when the "TEMP" or "TEMPORARY" keyword occurs in between +** CREATE and TABLE. ** -** sqlite_rename_parent('CREATE TABLE t1(a REFERENCES t2)', 't2', 't3') -** -> 'CREATE TABLE t1(a REFERENCES t3)' +** The new table record is initialized and put in pParse->pNewTable. +** As more of the CREATE TABLE statement is parsed, additional action +** routines will be called to add more information to this record. +** At the end of the CREATE TABLE statement, the sqlite3EndTable() routine +** is called to complete the construction of the new table record. */ -#ifndef SQLITE_OMIT_FOREIGN_KEY -static void renameParentFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv +SQLITE_PRIVATE void sqlite3StartTable( + Parse *pParse, /* Parser context */ + Token *pName1, /* First part of the name of the table or view */ + Token *pName2, /* Second part of the name of the table or view */ + int isTemp, /* True if this is a TEMP table */ + int isView, /* True if this is a VIEW */ + int isVirtual, /* True if this is a VIRTUAL table */ + int noErr /* Do nothing if table already exists */ ){ - sqlite3 *db = sqlite3_context_db_handle(context); - char *zOutput = 0; - char *zResult; - unsigned char const *zInput = sqlite3_value_text(argv[0]); - unsigned char const *zOld = sqlite3_value_text(argv[1]); - unsigned char const *zNew = sqlite3_value_text(argv[2]); - - unsigned const char *z; /* Pointer to token */ - int n; /* Length of token z */ - int token; /* Type of token */ + Table *pTable; + char *zName = 0; /* The name of the new table */ + sqlite3 *db = pParse->db; + Vdbe *v; + int iDb; /* Database number to create the table in */ + Token *pName; /* Unqualified name of the table to create */ - UNUSED_PARAMETER(NotUsed); - for(z=zInput; *z; z=z+n){ - n = sqlite3GetToken(z, &token); - if( token==TK_REFERENCES ){ - char *zParent; - do { - z += n; - n = sqlite3GetToken(z, &token); - }while( token==TK_SPACE ); + /* The table or view name to create is passed to this routine via tokens + ** pName1 and pName2. If the table name was fully qualified, for example: + ** + ** CREATE TABLE xxx.yyy (...); + ** + ** Then pName1 is set to "xxx" and pName2 "yyy". On the other hand if + ** the table name is not fully qualified, i.e.: + ** + ** CREATE TABLE yyy(...); + ** + ** Then pName1 is set to "yyy" and pName2 is "". + ** + ** The call below sets the pName pointer to point at the token (pName1 or + ** pName2) that stores the unqualified table name. The variable iDb is + ** set to the index of the database that the table or view is to be + ** created in. + */ + iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); + if( iDb<0 ) return; + if( !OMIT_TEMPDB && isTemp && pName2->n>0 && iDb!=1 ){ + /* If creating a temp table, the name may not be qualified. Unless + ** the database name is "temp" anyway. */ + sqlite3ErrorMsg(pParse, "temporary table name must be unqualified"); + return; + } + if( !OMIT_TEMPDB && isTemp ) iDb = 1; - zParent = sqlite3DbStrNDup(db, (const char *)z, n); - if( zParent==0 ) break; - sqlite3Dequote(zParent); - if( 0==sqlite3StrICmp((const char *)zOld, zParent) ){ - char *zOut = sqlite3MPrintf(db, "%s%.*s\"%w\"", - (zOutput?zOutput:""), z-zInput, zInput, (const char *)zNew - ); - sqlite3DbFree(db, zOutput); - zOutput = zOut; - zInput = &z[n]; + pParse->sNameToken = *pName; + zName = sqlite3NameFromToken(db, pName); + if( zName==0 ) return; + if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ + goto begin_table_error; + } + if( db->init.iDb==1 ) isTemp = 1; +#ifndef SQLITE_OMIT_AUTHORIZATION + assert( (isTemp & 1)==isTemp ); + { + int code; + char *zDb = db->aDb[iDb].zName; + if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(isTemp), 0, zDb) ){ + goto begin_table_error; + } + if( isView ){ + if( !OMIT_TEMPDB && isTemp ){ + code = SQLITE_CREATE_TEMP_VIEW; + }else{ + code = SQLITE_CREATE_VIEW; + } + }else{ + if( !OMIT_TEMPDB && isTemp ){ + code = SQLITE_CREATE_TEMP_TABLE; + }else{ + code = SQLITE_CREATE_TABLE; } - sqlite3DbFree(db, zParent); + } + if( !isVirtual && sqlite3AuthCheck(pParse, code, zName, 0, zDb) ){ + goto begin_table_error; } } - - zResult = sqlite3MPrintf(db, "%s%s", (zOutput?zOutput:""), zInput), - sqlite3_result_text(context, zResult, -1, SQLITE_DYNAMIC); - sqlite3DbFree(db, zOutput); -} #endif -#ifndef SQLITE_OMIT_TRIGGER -/* This function is used by SQL generated to implement the -** ALTER TABLE command. The first argument is the text of a CREATE TRIGGER -** statement. The second is a table name. The table name in the CREATE -** TRIGGER statement is replaced with the third argument and the result -** returned. This is analagous to renameTableFunc() above, except for CREATE -** TRIGGER, not CREATE INDEX and CREATE TABLE. -*/ -static void renameTriggerFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - unsigned char const *zSql = sqlite3_value_text(argv[0]); - unsigned char const *zTableName = sqlite3_value_text(argv[1]); - - int token; - Token tname; - int dist = 3; - unsigned char const *zCsr = zSql; - int len = 0; - char *zRet; - sqlite3 *db = sqlite3_context_db_handle(context); + /* Make sure the new table name does not collide with an existing + ** index or table name in the same database. Issue an error message if + ** it does. The exception is if the statement being parsed was passed + ** to an sqlite3_declare_vtab() call. In that case only the column names + ** and types will be used, so there is no need to test for namespace + ** collisions. + */ + if( !IN_DECLARE_VTAB ){ + char *zDb = db->aDb[iDb].zName; + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + goto begin_table_error; + } + pTable = sqlite3FindTable(db, zName, zDb); + if( pTable ){ + if( !noErr ){ + sqlite3ErrorMsg(pParse, "table %T already exists", pName); + }else{ + assert( !db->init.busy ); + sqlite3CodeVerifySchema(pParse, iDb); + } + goto begin_table_error; + } + if( sqlite3FindIndex(db, zName, zDb)!=0 ){ + sqlite3ErrorMsg(pParse, "there is already an index named %s", zName); + goto begin_table_error; + } + } - UNUSED_PARAMETER(NotUsed); + pTable = sqlite3DbMallocZero(db, sizeof(Table)); + if( pTable==0 ){ + db->mallocFailed = 1; + pParse->rc = SQLITE_NOMEM; + pParse->nErr++; + goto begin_table_error; + } + pTable->zName = zName; + pTable->iPKey = -1; + pTable->pSchema = db->aDb[iDb].pSchema; + pTable->nRef = 1; + pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + assert( pParse->pNewTable==0 ); + pParse->pNewTable = pTable; - /* The principle used to locate the table name in the CREATE TRIGGER - ** statement is that the table name is the first token that is immediatedly - ** preceded by either TK_ON or TK_DOT and immediatedly followed by one - ** of TK_WHEN, TK_BEGIN or TK_FOR. + /* If this is the magic sqlite_sequence table used by autoincrement, + ** then record a pointer to this table in the main database structure + ** so that INSERT can find the table easily. */ - if( zSql ){ - do { - - if( !*zCsr ){ - /* Ran out of input before finding the table name. Return NULL. */ - return; - } +#ifndef SQLITE_OMIT_AUTOINCREMENT + if( !pParse->nested && strcmp(zName, "sqlite_sequence")==0 ){ + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pTable->pSchema->pSeqTab = pTable; + } +#endif - /* Store the token that zCsr points to in tname. */ - tname.z = (char*)zCsr; - tname.n = len; + /* Begin generating the code that will insert the table record into + ** the SQLITE_MASTER table. Note in particular that we must go ahead + ** and allocate the record number for the table entry now. Before any + ** PRIMARY KEY or UNIQUE keywords are parsed. Those keywords will cause + ** indices to be created and the table record must come before the + ** indices. Hence, the record number for the table must be allocated + ** now. + */ + if( !db->init.busy && (v = sqlite3GetVdbe(pParse))!=0 ){ + int j1; + int fileFormat; + int reg1, reg2, reg3; + sqlite3BeginWriteOperation(pParse, 0, iDb); - /* Advance zCsr to the next token. Store that token type in 'token', - ** and its length in 'len' (to be used next iteration of this loop). - */ - do { - zCsr += len; - len = sqlite3GetToken(zCsr, &token); - }while( token==TK_SPACE ); - assert( len>0 ); +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( isVirtual ){ + sqlite3VdbeAddOp0(v, OP_VBegin); + } +#endif - /* Variable 'dist' stores the number of tokens read since the most - ** recent TK_DOT or TK_ON. This means that when a WHEN, FOR or BEGIN - ** token is read and 'dist' equals 2, the condition stated above - ** to be met. - ** - ** Note that ON cannot be a database, table or column name, so - ** there is no need to worry about syntax like - ** "CREATE TRIGGER ... ON ON.ON BEGIN ..." etc. - */ - dist++; - if( token==TK_DOT || token==TK_ON ){ - dist = 0; - } - } while( dist!=2 || (token!=TK_WHEN && token!=TK_FOR && token!=TK_BEGIN) ); + /* If the file format and encoding in the database have not been set, + ** set them now. + */ + reg1 = pParse->regRowid = ++pParse->nMem; + reg2 = pParse->regRoot = ++pParse->nMem; + reg3 = ++pParse->nMem; + sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, reg3, BTREE_FILE_FORMAT); + sqlite3VdbeUsesBtree(v, iDb); + j1 = sqlite3VdbeAddOp1(v, OP_If, reg3); VdbeCoverage(v); + fileFormat = (db->flags & SQLITE_LegacyFileFmt)!=0 ? + 1 : SQLITE_MAX_FILE_FORMAT; + sqlite3VdbeAddOp2(v, OP_Integer, fileFormat, reg3); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, reg3); + sqlite3VdbeAddOp2(v, OP_Integer, ENC(db), reg3); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_TEXT_ENCODING, reg3); + sqlite3VdbeJumpHere(v, j1); - /* Variable tname now contains the token that is the old table-name - ** in the CREATE TRIGGER statement. + /* This just creates a place-holder record in the sqlite_master table. + ** The record created does not contain anything yet. It will be replaced + ** by the real entry in code generated at sqlite3EndTable(). + ** + ** The rowid for the new entry is left in register pParse->regRowid. + ** The root page number of the new table is left in reg pParse->regRoot. + ** The rowid and root page number values are needed by the code that + ** sqlite3EndTable will generate. */ - zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", ((u8*)tname.z) - zSql, zSql, - zTableName, tname.z+tname.n); - sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) + if( isView || isVirtual ){ + sqlite3VdbeAddOp2(v, OP_Integer, 0, reg2); + }else +#endif + { + pParse->addrCrTab = sqlite3VdbeAddOp2(v, OP_CreateTable, iDb, reg2); + } + sqlite3OpenMasterTable(pParse, iDb); + sqlite3VdbeAddOp2(v, OP_NewRowid, 0, reg1); + sqlite3VdbeAddOp2(v, OP_Null, 0, reg3); + sqlite3VdbeAddOp3(v, OP_Insert, 0, reg3, reg1); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3VdbeAddOp0(v, OP_Close); } -} -#endif /* !SQLITE_OMIT_TRIGGER */ -/* -** Register built-in functions used to help implement ALTER TABLE -*/ -SQLITE_PRIVATE void sqlite3AlterFunctions(void){ - static SQLITE_WSD FuncDef aAlterTableFuncs[] = { - FUNCTION(sqlite_rename_table, 2, 0, 0, renameTableFunc), -#ifndef SQLITE_OMIT_TRIGGER - FUNCTION(sqlite_rename_trigger, 2, 0, 0, renameTriggerFunc), -#endif -#ifndef SQLITE_OMIT_FOREIGN_KEY - FUNCTION(sqlite_rename_parent, 3, 0, 0, renameParentFunc), -#endif - }; - int i; - FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); - FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aAlterTableFuncs); + /* Normal (non-error) return. */ + return; - for(i=0; i OR name= OR ... -** -** If argument zWhere is NULL, then a pointer string containing the text -** "name=" is returned, where is the quoted version -** of the string passed as argument zConstant. The returned buffer is -** allocated using sqlite3DbMalloc(). It is the responsibility of the -** caller to ensure that it is eventually freed. +** This macro is used to compare two strings in a case-insensitive manner. +** It is slightly faster than calling sqlite3StrICmp() directly, but +** produces larger code. ** -** If argument zWhere is not NULL, then the string returned is -** " OR name=", where is the contents of zWhere. -** In this case zWhere is passed to sqlite3DbFree() before returning. -** +** WARNING: This macro is not compatible with the strcmp() family. It +** returns true if the two strings are equal, otherwise false. */ -static char *whereOrName(sqlite3 *db, char *zWhere, char *zConstant){ - char *zNew; - if( !zWhere ){ - zNew = sqlite3MPrintf(db, "name=%Q", zConstant); - }else{ - zNew = sqlite3MPrintf(db, "%s OR name=%Q", zWhere, zConstant); - sqlite3DbFree(db, zWhere); - } - return zNew; -} +#define STRICMP(x, y) (\ +sqlite3UpperToLower[*(unsigned char *)(x)]== \ +sqlite3UpperToLower[*(unsigned char *)(y)] \ +&& sqlite3StrICmp((x)+1,(y)+1)==0 ) -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) /* -** Generate the text of a WHERE expression which can be used to select all -** tables that have foreign key constraints that refer to table pTab (i.e. -** constraints for which pTab is the parent table) from the sqlite_master -** table. +** Add a new column to the table currently being constructed. +** +** The parser calls this routine once for each column declaration +** in a CREATE TABLE statement. sqlite3StartTable() gets called +** first to get things going. Then this routine is called for each +** column. */ -static char *whereForeignKeys(Parse *pParse, Table *pTab){ - FKey *p; - char *zWhere = 0; - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - zWhere = whereOrName(pParse->db, zWhere, p->pFrom->zName); +SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName){ + Table *p; + int i; + char *z; + Column *pCol; + sqlite3 *db = pParse->db; + if( (p = pParse->pNewTable)==0 ) return; +#if SQLITE_MAX_COLUMN + if( p->nCol+1>db->aLimit[SQLITE_LIMIT_COLUMN] ){ + sqlite3ErrorMsg(pParse, "too many columns on %s", p->zName); + return; } - return zWhere; -} #endif - -/* -** Generate the text of a WHERE expression which can be used to select all -** temporary triggers on table pTab from the sqlite_temp_master table. If -** table pTab has no temporary triggers, or is itself stored in the -** temporary database, NULL is returned. -*/ -static char *whereTempTriggers(Parse *pParse, Table *pTab){ - Trigger *pTrig; - char *zWhere = 0; - const Schema *pTempSchema = pParse->db->aDb[1].pSchema; /* Temp db schema */ - - /* If the table is not located in the temp-db (in which case NULL is - ** returned, loop through the tables list of triggers. For each trigger - ** that is not part of the temp-db schema, add a clause to the WHERE - ** expression being built up in zWhere. - */ - if( pTab->pSchema!=pTempSchema ){ - sqlite3 *db = pParse->db; - for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ - if( pTrig->pSchema==pTempSchema ){ - zWhere = whereOrName(db, zWhere, pTrig->zName); - } + z = sqlite3NameFromToken(db, pName); + if( z==0 ) return; + for(i=0; inCol; i++){ + if( STRICMP(z, p->aCol[i].zName) ){ + sqlite3ErrorMsg(pParse, "duplicate column name: %s", z); + sqlite3DbFree(db, z); + return; } } - if( zWhere ){ - char *zNew = sqlite3MPrintf(pParse->db, "type='trigger' AND (%s)", zWhere); - sqlite3DbFree(pParse->db, zWhere); - zWhere = zNew; - } - return zWhere; -} - -/* -** Generate code to drop and reload the internal representation of table -** pTab from the database, including triggers and temporary triggers. -** Argument zName is the name of the table in the database schema at -** the time the generated code is executed. This can be different from -** pTab->zName if this function is being called to code part of an -** "ALTER TABLE RENAME TO" statement. -*/ -static void reloadTableSchema(Parse *pParse, Table *pTab, const char *zName){ - Vdbe *v; - char *zWhere; - int iDb; /* Index of database containing pTab */ -#ifndef SQLITE_OMIT_TRIGGER - Trigger *pTrig; -#endif - - v = sqlite3GetVdbe(pParse); - if( NEVER(v==0) ) return; - assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - assert( iDb>=0 ); - -#ifndef SQLITE_OMIT_TRIGGER - /* Drop any table triggers from the internal schema. */ - for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ - int iTrigDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema); - assert( iTrigDb==iDb || iTrigDb==1 ); - sqlite3VdbeAddOp4(v, OP_DropTrigger, iTrigDb, 0, 0, pTrig->zName, 0); + if( (p->nCol & 0x7)==0 ){ + Column *aNew; + aNew = sqlite3DbRealloc(db,p->aCol,(p->nCol+8)*sizeof(p->aCol[0])); + if( aNew==0 ){ + sqlite3DbFree(db, z); + return; + } + p->aCol = aNew; } -#endif - - /* Drop the table and index from the internal schema. */ - sqlite3VdbeAddOp4(v, OP_DropTable, iDb, 0, 0, pTab->zName, 0); - - /* Reload the table, index and permanent trigger schemas. */ - zWhere = sqlite3MPrintf(pParse->db, "tbl_name=%Q", zName); - if( !zWhere ) return; - sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere); - -#ifndef SQLITE_OMIT_TRIGGER - /* Now, if the table is not stored in the temp database, reload any temp - ** triggers. Don't use IN(...) in case SQLITE_OMIT_SUBQUERY is defined. + pCol = &p->aCol[p->nCol]; + memset(pCol, 0, sizeof(p->aCol[0])); + pCol->zName = z; + + /* If there is no type specified, columns have the default affinity + ** 'NONE'. If there is a type specified, then sqlite3AddColumnType() will + ** be called next to set pCol->affinity correctly. */ - if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ - sqlite3VdbeAddParseSchemaOp(v, 1, zWhere); - } -#endif + pCol->affinity = SQLITE_AFF_NONE; + pCol->szEst = 1; + p->nCol++; } /* -** Parameter zName is the name of a table that is about to be altered -** (either with ALTER TABLE ... RENAME TO or ALTER TABLE ... ADD COLUMN). -** If the table is a system table, this function leaves an error message -** in pParse->zErr (system tables may not be altered) and returns non-zero. -** -** Or, if zName is not a system table, zero is returned. +** This routine is called by the parser while in the middle of +** parsing a CREATE TABLE statement. A "NOT NULL" constraint has +** been seen on a column. This routine sets the notNull flag on +** the column currently under construction. */ -static int isSystemTable(Parse *pParse, const char *zName){ - if( sqlite3Strlen30(zName)>6 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ - sqlite3ErrorMsg(pParse, "table %s may not be altered", zName); - return 1; - } - return 0; +SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){ + Table *p; + p = pParse->pNewTable; + if( p==0 || NEVER(p->nCol<1) ) return; + p->aCol[p->nCol-1].notNull = (u8)onError; } /* -** Generate code to implement the "ALTER TABLE xxx RENAME TO yyy" -** command. +** Scan the column type name zType (length nType) and return the +** associated affinity type. +** +** This routine does a case-independent search of zType for the +** substrings in the following table. If one of the substrings is +** found, the corresponding affinity is returned. If zType contains +** more than one of the substrings, entries toward the top of +** the table take priority. For example, if zType is 'BLOBINT', +** SQLITE_AFF_INTEGER is returned. +** +** Substring | Affinity +** -------------------------------- +** 'INT' | SQLITE_AFF_INTEGER +** 'CHAR' | SQLITE_AFF_TEXT +** 'CLOB' | SQLITE_AFF_TEXT +** 'TEXT' | SQLITE_AFF_TEXT +** 'BLOB' | SQLITE_AFF_NONE +** 'REAL' | SQLITE_AFF_REAL +** 'FLOA' | SQLITE_AFF_REAL +** 'DOUB' | SQLITE_AFF_REAL +** +** If none of the substrings in the above table are found, +** SQLITE_AFF_NUMERIC is returned. */ -SQLITE_PRIVATE void sqlite3AlterRenameTable( - Parse *pParse, /* Parser context. */ - SrcList *pSrc, /* The table to rename. */ - Token *pName /* The new table name. */ -){ - int iDb; /* Database that contains the table */ - char *zDb; /* Name of database iDb */ - Table *pTab; /* Table being renamed */ - char *zName = 0; /* NULL-terminated version of pName */ - sqlite3 *db = pParse->db; /* Database connection */ - int nTabName; /* Number of UTF-8 characters in zTabName */ - const char *zTabName; /* Original name of the table */ - Vdbe *v; -#ifndef SQLITE_OMIT_TRIGGER - char *zWhere = 0; /* Where clause to locate temp triggers */ -#endif - VTable *pVTab = 0; /* Non-zero if this is a v-tab with an xRename() */ - int savedDbFlags; /* Saved value of db->flags */ - - savedDbFlags = db->flags; - if( NEVER(db->mallocFailed) ) goto exit_rename_table; - assert( pSrc->nSrc==1 ); - assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); - - pTab = sqlite3LocateTable(pParse, 0, pSrc->a[0].zName, pSrc->a[0].zDatabase); - if( !pTab ) goto exit_rename_table; - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - zDb = db->aDb[iDb].zName; - db->flags |= SQLITE_PreferBuiltin; - - /* Get a NULL terminated version of the new table name. */ - zName = sqlite3NameFromToken(db, pName); - if( !zName ) goto exit_rename_table; - - /* Check that a table or index named 'zName' does not already exist - ** in database iDb. If so, this is an error. - */ - if( sqlite3FindTable(db, zName, zDb) || sqlite3FindIndex(db, zName, zDb) ){ - sqlite3ErrorMsg(pParse, - "there is already another table or index with this name: %s", zName); - goto exit_rename_table; - } - - /* Make sure it is not a system table being altered, or a reserved name - ** that the table is being renamed to. - */ - if( SQLITE_OK!=isSystemTable(pParse, pTab->zName) ){ - goto exit_rename_table; - } - if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ goto - exit_rename_table; - } - -#ifndef SQLITE_OMIT_VIEW - if( pTab->pSelect ){ - sqlite3ErrorMsg(pParse, "view %s may not be altered", pTab->zName); - goto exit_rename_table; - } -#endif +SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, u8 *pszEst){ + u32 h = 0; + char aff = SQLITE_AFF_NUMERIC; + const char *zChar = 0; -#ifndef SQLITE_OMIT_AUTHORIZATION - /* Invoke the authorization callback. */ - if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){ - goto exit_rename_table; - } + if( zIn==0 ) return aff; + while( zIn[0] ){ + h = (h<<8) + sqlite3UpperToLower[(*zIn)&0xff]; + zIn++; + if( h==(('c'<<24)+('h'<<16)+('a'<<8)+'r') ){ /* CHAR */ + aff = SQLITE_AFF_TEXT; + zChar = zIn; + }else if( h==(('c'<<24)+('l'<<16)+('o'<<8)+'b') ){ /* CLOB */ + aff = SQLITE_AFF_TEXT; + }else if( h==(('t'<<24)+('e'<<16)+('x'<<8)+'t') ){ /* TEXT */ + aff = SQLITE_AFF_TEXT; + }else if( h==(('b'<<24)+('l'<<16)+('o'<<8)+'b') /* BLOB */ + && (aff==SQLITE_AFF_NUMERIC || aff==SQLITE_AFF_REAL) ){ + aff = SQLITE_AFF_NONE; + if( zIn[0]=='(' ) zChar = zIn; +#ifndef SQLITE_OMIT_FLOATING_POINT + }else if( h==(('r'<<24)+('e'<<16)+('a'<<8)+'l') /* REAL */ + && aff==SQLITE_AFF_NUMERIC ){ + aff = SQLITE_AFF_REAL; + }else if( h==(('f'<<24)+('l'<<16)+('o'<<8)+'a') /* FLOA */ + && aff==SQLITE_AFF_NUMERIC ){ + aff = SQLITE_AFF_REAL; + }else if( h==(('d'<<24)+('o'<<16)+('u'<<8)+'b') /* DOUB */ + && aff==SQLITE_AFF_NUMERIC ){ + aff = SQLITE_AFF_REAL; #endif - -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3ViewGetColumnNames(pParse, pTab) ){ - goto exit_rename_table; - } - if( IsVirtual(pTab) ){ - pVTab = sqlite3GetVTable(db, pTab); - if( pVTab->pVtab->pModule->xRename==0 ){ - pVTab = 0; + }else if( (h&0x00FFFFFF)==(('i'<<16)+('n'<<8)+'t') ){ /* INT */ + aff = SQLITE_AFF_INTEGER; + break; } } -#endif - - /* Begin a transaction and code the VerifyCookie for database iDb. - ** Then modify the schema cookie (since the ALTER TABLE modifies the - ** schema). Open a statement transaction if the table is a virtual - ** table. - */ - v = sqlite3GetVdbe(pParse); - if( v==0 ){ - goto exit_rename_table; - } - sqlite3BeginWriteOperation(pParse, pVTab!=0, iDb); - sqlite3ChangeCookie(pParse, iDb); - - /* If this is a virtual table, invoke the xRename() function if - ** one is defined. The xRename() callback will modify the names - ** of any resources used by the v-table implementation (including other - ** SQLite tables) that are identified by the name of the virtual table. - */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( pVTab ){ - int i = ++pParse->nMem; - sqlite3VdbeAddOp4(v, OP_String8, 0, i, 0, zName, 0); - sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB); - sqlite3MayAbort(pParse); - } -#endif - - /* figure out how many UTF-8 characters are in zName */ - zTabName = pTab->zName; - nTabName = sqlite3Utf8CharLen(zTabName, -1); -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - if( db->flags&SQLITE_ForeignKeys ){ - /* If foreign-key support is enabled, rewrite the CREATE TABLE - ** statements corresponding to all child tables of foreign key constraints - ** for which the renamed table is the parent table. */ - if( (zWhere=whereForeignKeys(pParse, pTab))!=0 ){ - sqlite3NestedParse(pParse, - "UPDATE \"%w\".%s SET " - "sql = sqlite_rename_parent(sql, %Q, %Q) " - "WHERE %s;", zDb, SCHEMA_TABLE(iDb), zTabName, zName, zWhere); - sqlite3DbFree(db, zWhere); + /* If pszEst is not NULL, store an estimate of the field size. The + ** estimate is scaled so that the size of an integer is 1. */ + if( pszEst ){ + *pszEst = 1; /* default size is approx 4 bytes */ + if( aff255 ) v = 255; + *pszEst = v; /* BLOB(k), VARCHAR(k), CHAR(k) -> r=(k/4+1) */ + break; + } + zChar++; + } + }else{ + *pszEst = 5; /* BLOB, TEXT, CLOB -> r=5 (approx 20 bytes)*/ + } } } -#endif + return aff; +} - /* Modify the sqlite_master table to use the new table name. */ - sqlite3NestedParse(pParse, - "UPDATE %Q.%s SET " -#ifdef SQLITE_OMIT_TRIGGER - "sql = sqlite_rename_table(sql, %Q), " -#else - "sql = CASE " - "WHEN type = 'trigger' THEN sqlite_rename_trigger(sql, %Q)" - "ELSE sqlite_rename_table(sql, %Q) END, " -#endif - "tbl_name = %Q, " - "name = CASE " - "WHEN type='table' THEN %Q " - "WHEN name LIKE 'sqlite_autoindex%%' AND type='index' THEN " - "'sqlite_autoindex_' || %Q || substr(name,%d+18) " - "ELSE name END " - "WHERE tbl_name=%Q AND " - "(type='table' OR type='index' OR type='trigger');", - zDb, SCHEMA_TABLE(iDb), zName, zName, zName, -#ifndef SQLITE_OMIT_TRIGGER - zName, -#endif - zName, nTabName, zTabName - ); +/* +** This routine is called by the parser while in the middle of +** parsing a CREATE TABLE statement. The pFirst token is the first +** token in the sequence of tokens that describe the type of the +** column currently under construction. pLast is the last token +** in the sequence. Use this information to construct a string +** that contains the typename of the column and store that string +** in zType. +*/ +SQLITE_PRIVATE void sqlite3AddColumnType(Parse *pParse, Token *pType){ + Table *p; + Column *pCol; -#ifndef SQLITE_OMIT_AUTOINCREMENT - /* If the sqlite_sequence table exists in this database, then update - ** it with the new table name. - */ - if( sqlite3FindTable(db, "sqlite_sequence", zDb) ){ - sqlite3NestedParse(pParse, - "UPDATE \"%w\".sqlite_sequence set name = %Q WHERE name = %Q", - zDb, zName, pTab->zName); - } -#endif + p = pParse->pNewTable; + if( p==0 || NEVER(p->nCol<1) ) return; + pCol = &p->aCol[p->nCol-1]; + assert( pCol->zType==0 ); + pCol->zType = sqlite3NameFromToken(pParse->db, pType); + pCol->affinity = sqlite3AffinityType(pCol->zType, &pCol->szEst); +} -#ifndef SQLITE_OMIT_TRIGGER - /* If there are TEMP triggers on this table, modify the sqlite_temp_master - ** table. Don't do this if the table being ALTERed is itself located in - ** the temp database. - */ - if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ - sqlite3NestedParse(pParse, - "UPDATE sqlite_temp_master SET " - "sql = sqlite_rename_trigger(sql, %Q), " - "tbl_name = %Q " - "WHERE %s;", zName, zName, zWhere); - sqlite3DbFree(db, zWhere); +/* +** The expression is the default value for the most recently added column +** of the table currently under construction. +** +** Default value expressions must be constant. Raise an exception if this +** is not the case. +** +** This routine is called by the parser while in the middle of +** parsing a CREATE TABLE statement. +*/ +SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse *pParse, ExprSpan *pSpan){ + Table *p; + Column *pCol; + sqlite3 *db = pParse->db; + p = pParse->pNewTable; + if( p!=0 ){ + pCol = &(p->aCol[p->nCol-1]); + if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr, db->init.busy) ){ + sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant", + pCol->zName); + }else{ + /* A copy of pExpr is used instead of the original, as pExpr contains + ** tokens that point to volatile memory. The 'span' of the expression + ** is required by pragma table_info. + */ + sqlite3ExprDelete(db, pCol->pDflt); + pCol->pDflt = sqlite3ExprDup(db, pSpan->pExpr, EXPRDUP_REDUCE); + sqlite3DbFree(db, pCol->zDflt); + pCol->zDflt = sqlite3DbStrNDup(db, (char*)pSpan->zStart, + (int)(pSpan->zEnd - pSpan->zStart)); + } } -#endif + sqlite3ExprDelete(db, pSpan->pExpr); +} -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - if( db->flags&SQLITE_ForeignKeys ){ - FKey *p; - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - Table *pFrom = p->pFrom; - if( pFrom!=pTab ){ - reloadTableSchema(pParse, p->pFrom, pFrom->zName); +/* +** Designate the PRIMARY KEY for the table. pList is a list of names +** of columns that form the primary key. If pList is NULL, then the +** most recently added column of the table is the primary key. +** +** A table can have at most one primary key. If the table already has +** a primary key (and this is the second primary key) then create an +** error. +** +** If the PRIMARY KEY is on a single column whose datatype is INTEGER, +** then we will try to use that column as the rowid. Set the Table.iPKey +** field of the table under construction to be the index of the +** INTEGER PRIMARY KEY column. Table.iPKey is set to -1 if there is +** no INTEGER PRIMARY KEY. +** +** If the key is not an INTEGER PRIMARY KEY, then create a unique +** index for the key. No index is created for INTEGER PRIMARY KEYs. +*/ +SQLITE_PRIVATE void sqlite3AddPrimaryKey( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* List of field names to be indexed */ + int onError, /* What to do with a uniqueness conflict */ + int autoInc, /* True if the AUTOINCREMENT keyword is present */ + int sortOrder /* SQLITE_SO_ASC or SQLITE_SO_DESC */ +){ + Table *pTab = pParse->pNewTable; + char *zType = 0; + int iCol = -1, i; + int nTerm; + if( pTab==0 || IN_DECLARE_VTAB ) goto primary_key_exit; + if( pTab->tabFlags & TF_HasPrimaryKey ){ + sqlite3ErrorMsg(pParse, + "table \"%s\" has more than one primary key", pTab->zName); + goto primary_key_exit; + } + pTab->tabFlags |= TF_HasPrimaryKey; + if( pList==0 ){ + iCol = pTab->nCol - 1; + pTab->aCol[iCol].colFlags |= COLFLAG_PRIMKEY; + zType = pTab->aCol[iCol].zType; + nTerm = 1; + }else{ + nTerm = pList->nExpr; + for(i=0; inCol; iCol++){ + if( sqlite3StrICmp(pList->a[i].zName, pTab->aCol[iCol].zName)==0 ){ + pTab->aCol[iCol].colFlags |= COLFLAG_PRIMKEY; + zType = pTab->aCol[iCol].zType; + break; + } } } } + if( nTerm==1 + && zType && sqlite3StrICmp(zType, "INTEGER")==0 + && sortOrder==SQLITE_SO_ASC + ){ + pTab->iPKey = iCol; + pTab->keyConf = (u8)onError; + assert( autoInc==0 || autoInc==1 ); + pTab->tabFlags |= autoInc*TF_Autoincrement; + if( pList ) pParse->iPkSortOrder = pList->a[0].sortOrder; + }else if( autoInc ){ +#ifndef SQLITE_OMIT_AUTOINCREMENT + sqlite3ErrorMsg(pParse, "AUTOINCREMENT is only allowed on an " + "INTEGER PRIMARY KEY"); #endif + }else{ + Vdbe *v = pParse->pVdbe; + Index *p; + if( v ) pParse->addrSkipPK = sqlite3VdbeAddOp0(v, OP_Noop); + p = sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0, + 0, sortOrder, 0); + if( p ){ + p->idxType = SQLITE_IDXTYPE_PRIMARYKEY; + if( v ) sqlite3VdbeJumpHere(v, pParse->addrSkipPK); + } + pList = 0; + } - /* Drop and reload the internal table schema. */ - reloadTableSchema(pParse, pTab, zName); - -exit_rename_table: - sqlite3SrcListDelete(db, pSrc); - sqlite3DbFree(db, zName); - db->flags = savedDbFlags; +primary_key_exit: + sqlite3ExprListDelete(pParse->db, pList); + return; } - /* -** Generate code to make sure the file format number is at least minFormat. -** The generated code will increase the file format number if necessary. +** Add a new CHECK constraint to the table currently under construction. */ -SQLITE_PRIVATE void sqlite3MinimumFileFormat(Parse *pParse, int iDb, int minFormat){ - Vdbe *v; - v = sqlite3GetVdbe(pParse); - /* The VDBE should have been allocated before this routine is called. - ** If that allocation failed, we would have quit before reaching this - ** point */ - if( ALWAYS(v) ){ - int r1 = sqlite3GetTempReg(pParse); - int r2 = sqlite3GetTempReg(pParse); - int j1; - sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT); - sqlite3VdbeUsesBtree(v, iDb); - sqlite3VdbeAddOp2(v, OP_Integer, minFormat, r2); - j1 = sqlite3VdbeAddOp3(v, OP_Ge, r2, 0, r1); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, r2); - sqlite3VdbeJumpHere(v, j1); - sqlite3ReleaseTempReg(pParse, r1); - sqlite3ReleaseTempReg(pParse, r2); +SQLITE_PRIVATE void sqlite3AddCheckConstraint( + Parse *pParse, /* Parsing context */ + Expr *pCheckExpr /* The check expression */ +){ +#ifndef SQLITE_OMIT_CHECK + Table *pTab = pParse->pNewTable; + sqlite3 *db = pParse->db; + if( pTab && !IN_DECLARE_VTAB + && !sqlite3BtreeIsReadonly(db->aDb[db->init.iDb].pBt) + ){ + pTab->pCheck = sqlite3ExprListAppend(pParse, pTab->pCheck, pCheckExpr); + if( pParse->constraintName.n ){ + sqlite3ExprListSetName(pParse, pTab->pCheck, &pParse->constraintName, 1); + } + }else +#endif + { + sqlite3ExprDelete(pParse->db, pCheckExpr); } } /* -** This function is called after an "ALTER TABLE ... ADD" statement -** has been parsed. Argument pColDef contains the text of the new -** column definition. -** -** The Table structure pParse->pNewTable was extended to include -** the new column during parsing. +** Set the collation function of the most recently parsed table column +** to the CollSeq given. */ -SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *pParse, Token *pColDef){ - Table *pNew; /* Copy of pParse->pNewTable */ - Table *pTab; /* Table being altered */ - int iDb; /* Database number */ - const char *zDb; /* Database name */ - const char *zTab; /* Table name */ - char *zCol; /* Null-terminated column definition */ - Column *pCol; /* The new column */ - Expr *pDflt; /* Default value for the new column */ - sqlite3 *db; /* The database connection; */ +SQLITE_PRIVATE void sqlite3AddCollateType(Parse *pParse, Token *pToken){ + Table *p; + int i; + char *zColl; /* Dequoted name of collation sequence */ + sqlite3 *db; + if( (p = pParse->pNewTable)==0 ) return; + i = p->nCol-1; db = pParse->db; - if( pParse->nErr || db->mallocFailed ) return; - pNew = pParse->pNewTable; - assert( pNew ); - - assert( sqlite3BtreeHoldsAllMutexes(db) ); - iDb = sqlite3SchemaToIndex(db, pNew->pSchema); - zDb = db->aDb[iDb].zName; - zTab = &pNew->zName[16]; /* Skip the "sqlite_altertab_" prefix on the name */ - pCol = &pNew->aCol[pNew->nCol-1]; - pDflt = pCol->pDflt; - pTab = sqlite3FindTable(db, zTab, zDb); - assert( pTab ); - -#ifndef SQLITE_OMIT_AUTHORIZATION - /* Invoke the authorization callback. */ - if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){ - return; - } -#endif - - /* If the default value for the new column was specified with a - ** literal NULL, then set pDflt to 0. This simplifies checking - ** for an SQL NULL default below. - */ - if( pDflt && pDflt->op==TK_NULL ){ - pDflt = 0; - } - - /* Check that the new column is not specified as PRIMARY KEY or UNIQUE. - ** If there is a NOT NULL constraint, then the default value for the - ** column must not be NULL. - */ - if( pCol->isPrimKey ){ - sqlite3ErrorMsg(pParse, "Cannot add a PRIMARY KEY column"); - return; - } - if( pNew->pIndex ){ - sqlite3ErrorMsg(pParse, "Cannot add a UNIQUE column"); - return; - } - if( (db->flags&SQLITE_ForeignKeys) && pNew->pFKey && pDflt ){ - sqlite3ErrorMsg(pParse, - "Cannot add a REFERENCES column with non-NULL default value"); - return; - } - if( pCol->notNull && !pDflt ){ - sqlite3ErrorMsg(pParse, - "Cannot add a NOT NULL column with default value NULL"); - return; - } + zColl = sqlite3NameFromToken(db, pToken); + if( !zColl ) return; - /* Ensure the default expression is something that sqlite3ValueFromExpr() - ** can handle (i.e. not CURRENT_TIME etc.) - */ - if( pDflt ){ - sqlite3_value *pVal; - if( sqlite3ValueFromExpr(db, pDflt, SQLITE_UTF8, SQLITE_AFF_NONE, &pVal) ){ - db->mallocFailed = 1; - return; - } - if( !pVal ){ - sqlite3ErrorMsg(pParse, "Cannot add a column with non-constant default"); - return; + if( sqlite3LocateCollSeq(pParse, zColl) ){ + Index *pIdx; + sqlite3DbFree(db, p->aCol[i].zColl); + p->aCol[i].zColl = zColl; + + /* If the column is declared as " PRIMARY KEY COLLATE ", + ** then an index may have been created on this column before the + ** collation type was added. Correct this if it is the case. + */ + for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){ + assert( pIdx->nKeyCol==1 ); + if( pIdx->aiColumn[0]==i ){ + pIdx->azColl[0] = p->aCol[i].zColl; + } } - sqlite3ValueFree(pVal); + }else{ + sqlite3DbFree(db, zColl); } +} - /* Modify the CREATE TABLE statement. */ - zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n); - if( zCol ){ - char *zEnd = &zCol[pColDef->n-1]; - int savedDbFlags = db->flags; - while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){ - *zEnd-- = '\0'; - } - db->flags |= SQLITE_PreferBuiltin; - sqlite3NestedParse(pParse, - "UPDATE \"%w\".%s SET " - "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) " - "WHERE type = 'table' AND name = %Q", - zDb, SCHEMA_TABLE(iDb), pNew->addColOffset, zCol, pNew->addColOffset+1, - zTab - ); - sqlite3DbFree(db, zCol); - db->flags = savedDbFlags; - } +/* +** This function returns the collation sequence for database native text +** encoding identified by the string zName, length nName. +** +** If the requested collation sequence is not available, or not available +** in the database native encoding, the collation factory is invoked to +** request it. If the collation factory does not supply such a sequence, +** and the sequence is available in another text encoding, then that is +** returned instead. +** +** If no versions of the requested collations sequence are available, or +** another error occurs, NULL is returned and an error message written into +** pParse. +** +** This routine is a wrapper around sqlite3FindCollSeq(). This routine +** invokes the collation factory if the named collation cannot be found +** and generates an error message. +** +** See also: sqlite3FindCollSeq(), sqlite3GetCollSeq() +*/ +SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char *zName){ + sqlite3 *db = pParse->db; + u8 enc = ENC(db); + u8 initbusy = db->init.busy; + CollSeq *pColl; - /* If the default value of the new column is NULL, then set the file - ** format to 2. If the default value of the new column is not NULL, - ** the file format becomes 3. - */ - sqlite3MinimumFileFormat(pParse, iDb, pDflt ? 3 : 2); + pColl = sqlite3FindCollSeq(db, enc, zName, initbusy); + if( !initbusy && (!pColl || !pColl->xCmp) ){ + pColl = sqlite3GetCollSeq(pParse, enc, pColl, zName); + } - /* Reload the schema of the modified table. */ - reloadTableSchema(pParse, pTab, pTab->zName); + return pColl; } + /* -** This function is called by the parser after the table-name in -** an "ALTER TABLE ADD" statement is parsed. Argument -** pSrc is the full-name of the table being altered. +** Generate code that will increment the schema cookie. ** -** This routine makes a (partial) copy of the Table structure -** for the table being altered and sets Parse.pNewTable to point -** to it. Routines called by the parser as the column definition -** is parsed (i.e. sqlite3AddColumn()) add the new Column data to -** the copy. The copy of the Table structure is deleted by tokenize.c -** after parsing is finished. +** The schema cookie is used to determine when the schema for the +** database changes. After each schema change, the cookie value +** changes. When a process first reads the schema it records the +** cookie. Thereafter, whenever it goes to access the database, +** it checks the cookie to make sure the schema has not changed +** since it was last read. ** -** Routine sqlite3AlterFinishAddColumn() will be called to complete -** coding the "ALTER TABLE ... ADD" statement. +** This plan is not completely bullet-proof. It is possible for +** the schema to change multiple times and for the cookie to be +** set back to prior value. But schema changes are infrequent +** and the probability of hitting the same cookie value is only +** 1 chance in 2^32. So we're safe enough. */ -SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *pParse, SrcList *pSrc){ - Table *pNew; - Table *pTab; - Vdbe *v; - int iDb; - int i; - int nAlloc; +SQLITE_PRIVATE void sqlite3ChangeCookie(Parse *pParse, int iDb){ + int r1 = sqlite3GetTempReg(pParse); sqlite3 *db = pParse->db; + Vdbe *v = pParse->pVdbe; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + sqlite3VdbeAddOp2(v, OP_Integer, db->aDb[iDb].pSchema->schema_cookie+1, r1); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION, r1); + sqlite3ReleaseTempReg(pParse, r1); +} - /* Look up the table being altered. */ - assert( pParse->pNewTable==0 ); - assert( sqlite3BtreeHoldsAllMutexes(db) ); - if( db->mallocFailed ) goto exit_begin_add_column; - pTab = sqlite3LocateTable(pParse, 0, pSrc->a[0].zName, pSrc->a[0].zDatabase); - if( !pTab ) goto exit_begin_add_column; - -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTab) ){ - sqlite3ErrorMsg(pParse, "virtual tables may not be altered"); - goto exit_begin_add_column; +/* +** Measure the number of characters needed to output the given +** identifier. The number returned includes any quotes used +** but does not include the null terminator. +** +** The estimate is conservative. It might be larger that what is +** really needed. +*/ +static int identLength(const char *z){ + int n; + for(n=0; *z; n++, z++){ + if( *z=='"' ){ n++; } } -#endif + return n + 2; +} - /* Make sure this is not an attempt to ALTER a view. */ - if( pTab->pSelect ){ - sqlite3ErrorMsg(pParse, "Cannot add a column to a view"); - goto exit_begin_add_column; - } - if( SQLITE_OK!=isSystemTable(pParse, pTab->zName) ){ - goto exit_begin_add_column; +/* +** The first parameter is a pointer to an output buffer. The second +** parameter is a pointer to an integer that contains the offset at +** which to write into the output buffer. This function copies the +** nul-terminated string pointed to by the third parameter, zSignedIdent, +** to the specified offset in the buffer and updates *pIdx to refer +** to the first byte after the last byte written before returning. +** +** If the string zSignedIdent consists entirely of alpha-numeric +** characters, does not begin with a digit and is not an SQL keyword, +** then it is copied to the output buffer exactly as it is. Otherwise, +** it is quoted using double-quotes. +*/ +static void identPut(char *z, int *pIdx, char *zSignedIdent){ + unsigned char *zIdent = (unsigned char*)zSignedIdent; + int i, j, needQuote; + i = *pIdx; + + for(j=0; zIdent[j]; j++){ + if( !sqlite3Isalnum(zIdent[j]) && zIdent[j]!='_' ) break; } + needQuote = sqlite3Isdigit(zIdent[0]) + || sqlite3KeywordCode(zIdent, j)!=TK_ID + || zIdent[j]!=0 + || j==0; - assert( pTab->addColOffset>0 ); - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + if( needQuote ) z[i++] = '"'; + for(j=0; zIdent[j]; j++){ + z[i++] = zIdent[j]; + if( zIdent[j]=='"' ) z[i++] = '"'; + } + if( needQuote ) z[i++] = '"'; + z[i] = 0; + *pIdx = i; +} - /* Put a copy of the Table struct in Parse.pNewTable for the - ** sqlite3AddColumn() function and friends to modify. But modify - ** the name by adding an "sqlite_altertab_" prefix. By adding this - ** prefix, we insure that the name will not collide with an existing - ** table because user table are not allowed to have the "sqlite_" - ** prefix on their name. - */ - pNew = (Table*)sqlite3DbMallocZero(db, sizeof(Table)); - if( !pNew ) goto exit_begin_add_column; - pParse->pNewTable = pNew; - pNew->nRef = 1; - pNew->nCol = pTab->nCol; - assert( pNew->nCol>0 ); - nAlloc = (((pNew->nCol-1)/8)*8)+8; - assert( nAlloc>=pNew->nCol && nAlloc%8==0 && nAlloc-pNew->nCol<8 ); - pNew->aCol = (Column*)sqlite3DbMallocZero(db, sizeof(Column)*nAlloc); - pNew->zName = sqlite3MPrintf(db, "sqlite_altertab_%s", pTab->zName); - if( !pNew->aCol || !pNew->zName ){ - db->mallocFailed = 1; - goto exit_begin_add_column; +/* +** Generate a CREATE TABLE statement appropriate for the given +** table. Memory to hold the text of the statement is obtained +** from sqliteMalloc() and must be freed by the calling function. +*/ +static char *createTableStmt(sqlite3 *db, Table *p){ + int i, k, n; + char *zStmt; + char *zSep, *zSep2, *zEnd; + Column *pCol; + n = 0; + for(pCol = p->aCol, i=0; inCol; i++, pCol++){ + n += identLength(pCol->zName) + 5; } - memcpy(pNew->aCol, pTab->aCol, sizeof(Column)*pNew->nCol); - for(i=0; inCol; i++){ - Column *pCol = &pNew->aCol[i]; - pCol->zName = sqlite3DbStrDup(db, pCol->zName); - pCol->zColl = 0; - pCol->zType = 0; - pCol->pDflt = 0; - pCol->zDflt = 0; + n += identLength(p->zName); + if( n<50 ){ + zSep = ""; + zSep2 = ","; + zEnd = ")"; + }else{ + zSep = "\n "; + zSep2 = ",\n "; + zEnd = "\n)"; } - pNew->pSchema = db->aDb[iDb].pSchema; - pNew->addColOffset = pTab->addColOffset; - pNew->nRef = 1; + n += 35 + 6*p->nCol; + zStmt = sqlite3DbMallocRaw(0, n); + if( zStmt==0 ){ + db->mallocFailed = 1; + return 0; + } + sqlite3_snprintf(n, zStmt, "CREATE TABLE "); + k = sqlite3Strlen30(zStmt); + identPut(zStmt, &k, p->zName); + zStmt[k++] = '('; + for(pCol=p->aCol, i=0; inCol; i++, pCol++){ + static const char * const azType[] = { + /* SQLITE_AFF_NONE */ "", + /* SQLITE_AFF_TEXT */ " TEXT", + /* SQLITE_AFF_NUMERIC */ " NUM", + /* SQLITE_AFF_INTEGER */ " INT", + /* SQLITE_AFF_REAL */ " REAL" + }; + int len; + const char *zType; - /* Begin a transaction and increment the schema cookie. */ - sqlite3BeginWriteOperation(pParse, 0, iDb); - v = sqlite3GetVdbe(pParse); - if( !v ) goto exit_begin_add_column; - sqlite3ChangeCookie(pParse, iDb); + sqlite3_snprintf(n-k, &zStmt[k], zSep); + k += sqlite3Strlen30(&zStmt[k]); + zSep = zSep2; + identPut(zStmt, &k, pCol->zName); + assert( pCol->affinity-SQLITE_AFF_NONE >= 0 ); + assert( pCol->affinity-SQLITE_AFF_NONE < ArraySize(azType) ); + testcase( pCol->affinity==SQLITE_AFF_NONE ); + testcase( pCol->affinity==SQLITE_AFF_TEXT ); + testcase( pCol->affinity==SQLITE_AFF_NUMERIC ); + testcase( pCol->affinity==SQLITE_AFF_INTEGER ); + testcase( pCol->affinity==SQLITE_AFF_REAL ); + + zType = azType[pCol->affinity - SQLITE_AFF_NONE]; + len = sqlite3Strlen30(zType); + assert( pCol->affinity==SQLITE_AFF_NONE + || pCol->affinity==sqlite3AffinityType(zType, 0) ); + memcpy(&zStmt[k], zType, len); + k += len; + assert( k<=n ); + } + sqlite3_snprintf(n-k, &zStmt[k], "%s", zEnd); + return zStmt; +} -exit_begin_add_column: - sqlite3SrcListDelete(db, pSrc); - return; +/* +** Resize an Index object to hold N columns total. Return SQLITE_OK +** on success and SQLITE_NOMEM on an OOM error. +*/ +static int resizeIndexObject(sqlite3 *db, Index *pIdx, int N){ + char *zExtra; + int nByte; + if( pIdx->nColumn>=N ) return SQLITE_OK; + assert( pIdx->isResized==0 ); + nByte = (sizeof(char*) + sizeof(i16) + 1)*N; + zExtra = sqlite3DbMallocZero(db, nByte); + if( zExtra==0 ) return SQLITE_NOMEM; + memcpy(zExtra, pIdx->azColl, sizeof(char*)*pIdx->nColumn); + pIdx->azColl = (char**)zExtra; + zExtra += sizeof(char*)*N; + memcpy(zExtra, pIdx->aiColumn, sizeof(i16)*pIdx->nColumn); + pIdx->aiColumn = (i16*)zExtra; + zExtra += sizeof(i16)*N; + memcpy(zExtra, pIdx->aSortOrder, pIdx->nColumn); + pIdx->aSortOrder = (u8*)zExtra; + pIdx->nColumn = N; + pIdx->isResized = 1; + return SQLITE_OK; } -#endif /* SQLITE_ALTER_TABLE */ -/************** End of alter.c ***********************************************/ -/************** Begin file analyze.c *****************************************/ /* -** 2005 July 8 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code associated with the ANALYZE command. +** Estimate the total row width for a table. */ -#ifndef SQLITE_OMIT_ANALYZE +static void estimateTableWidth(Table *pTab){ + unsigned wTable = 0; + const Column *pTabCol; + int i; + for(i=pTab->nCol, pTabCol=pTab->aCol; i>0; i--, pTabCol++){ + wTable += pTabCol->szEst; + } + if( pTab->iPKey<0 ) wTable++; + pTab->szTabRow = sqlite3LogEst(wTable*4); +} /* -** This routine generates code that opens the sqlite_stat1 table for -** writing with cursor iStatCur. If the library was built with the -** SQLITE_ENABLE_STAT2 macro defined, then the sqlite_stat2 table is -** opened for writing using cursor (iStatCur+1) -** -** If the sqlite_stat1 tables does not previously exist, it is created. -** Similarly, if the sqlite_stat2 table does not exist and the library -** is compiled with SQLITE_ENABLE_STAT2 defined, it is created. -** -** Argument zWhere may be a pointer to a buffer containing a table name, -** or it may be a NULL pointer. If it is not NULL, then all entries in -** the sqlite_stat1 and (if applicable) sqlite_stat2 tables associated -** with the named table are deleted. If zWhere==0, then code is generated -** to delete all stat table entries. +** Estimate the average size of a row for an index. */ -static void openStatTable( - Parse *pParse, /* Parsing context */ - int iDb, /* The database we are looking in */ - int iStatCur, /* Open the sqlite_stat1 table on this cursor */ - const char *zWhere, /* Delete entries for this table or index */ - const char *zWhereType /* Either "tbl" or "idx" */ -){ - static const struct { - const char *zName; - const char *zCols; - } aTable[] = { - { "sqlite_stat1", "tbl,idx,stat" }, -#ifdef SQLITE_ENABLE_STAT2 - { "sqlite_stat2", "tbl,idx,sampleno,sample" }, -#endif - }; +static void estimateIndexWidth(Index *pIdx){ + unsigned wIndex = 0; + int i; + const Column *aCol = pIdx->pTable->aCol; + for(i=0; inColumn; i++){ + i16 x = pIdx->aiColumn[i]; + assert( xpTable->nCol ); + wIndex += x<0 ? 1 : aCol[pIdx->aiColumn[i]].szEst; + } + pIdx->szIdxRow = sqlite3LogEst(wIndex*4); +} - int aRoot[] = {0, 0}; - u8 aCreateTbl[] = {0, 0}; +/* Return true if value x is found any of the first nCol entries of aiCol[] +*/ +static int hasColumn(const i16 *aiCol, int nCol, int x){ + while( nCol-- > 0 ) if( x==*(aiCol++) ) return 1; + return 0; +} - int i; +/* +** This routine runs at the end of parsing a CREATE TABLE statement that +** has a WITHOUT ROWID clause. The job of this routine is to convert both +** internal schema data structures and the generated VDBE code so that they +** are appropriate for a WITHOUT ROWID table instead of a rowid table. +** Changes include: +** +** (1) Convert the OP_CreateTable into an OP_CreateIndex. There is +** no rowid btree for a WITHOUT ROWID. Instead, the canonical +** data storage is a covering index btree. +** (2) Bypass the creation of the sqlite_master table entry +** for the PRIMARY KEY as the primary key index is now +** identified by the sqlite_master table entry of the table itself. +** (3) Set the Index.tnum of the PRIMARY KEY Index object in the +** schema to the rootpage from the main table. +** (4) Set all columns of the PRIMARY KEY schema object to be NOT NULL. +** (5) Add all table columns to the PRIMARY KEY Index object +** so that the PRIMARY KEY is a covering index. The surplus +** columns are part of KeyInfo.nXField and are not used for +** sorting or lookup or uniqueness checks. +** (6) Replace the rowid tail on all automatically generated UNIQUE +** indices with the PRIMARY KEY columns. +*/ +static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){ + Index *pIdx; + Index *pPk; + int nPk; + int i, j; sqlite3 *db = pParse->db; - Db *pDb; - Vdbe *v = sqlite3GetVdbe(pParse); - if( v==0 ) return; - assert( sqlite3BtreeHoldsAllMutexes(db) ); - assert( sqlite3VdbeDb(v)==db ); - pDb = &db->aDb[iDb]; + Vdbe *v = pParse->pVdbe; - for(i=0; izName))==0 ){ - /* The sqlite_stat[12] table does not exist. Create it. Note that a - ** side-effect of the CREATE TABLE statement is to leave the rootpage - ** of the new table in register pParse->regRoot. This is important - ** because the OpenWrite opcode below will be needing it. */ - sqlite3NestedParse(pParse, - "CREATE TABLE %Q.%s(%s)", pDb->zName, zTab, aTable[i].zCols - ); - aRoot[i] = pParse->regRoot; - aCreateTbl[i] = 1; - }else{ - /* The table already exists. If zWhere is not NULL, delete all entries - ** associated with the table zWhere. If zWhere is NULL, delete the - ** entire contents of the table. */ - aRoot[i] = pStat->tnum; - sqlite3TableLock(pParse, iDb, aRoot[i], 1, zTab); - if( zWhere ){ - sqlite3NestedParse(pParse, - "DELETE FROM %Q.%s WHERE %s=%Q", pDb->zName, zTab, zWhereType, zWhere - ); - }else{ - /* The sqlite_stat[12] table already exists. Delete all rows. */ - sqlite3VdbeAddOp2(v, OP_Clear, aRoot[i], iDb); + /* Convert the OP_CreateTable opcode that would normally create the + ** root-page for the table into an OP_CreateIndex opcode. The index + ** created will become the PRIMARY KEY index. + */ + if( pParse->addrCrTab ){ + assert( v ); + sqlite3VdbeGetOp(v, pParse->addrCrTab)->opcode = OP_CreateIndex; + } + + /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master + ** table entry. + */ + if( pParse->addrSkipPK ){ + assert( v ); + sqlite3VdbeGetOp(v, pParse->addrSkipPK)->opcode = OP_Goto; + } + + /* Locate the PRIMARY KEY index. Or, if this table was originally + ** an INTEGER PRIMARY KEY table, create a new PRIMARY KEY index. + */ + if( pTab->iPKey>=0 ){ + ExprList *pList; + pList = sqlite3ExprListAppend(pParse, 0, 0); + if( pList==0 ) return; + pList->a[0].zName = sqlite3DbStrDup(pParse->db, + pTab->aCol[pTab->iPKey].zName); + pList->a[0].sortOrder = pParse->iPkSortOrder; + assert( pParse->pNewTable==pTab ); + pPk = sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0); + if( pPk==0 ) return; + pPk->idxType = SQLITE_IDXTYPE_PRIMARYKEY; + pTab->iPKey = -1; + }else{ + pPk = sqlite3PrimaryKeyIndex(pTab); + } + pPk->isCovering = 1; + assert( pPk!=0 ); + nPk = pPk->nKeyCol; + + /* Make sure every column of the PRIMARY KEY is NOT NULL */ + for(i=0; iaCol[pPk->aiColumn[i]].notNull = 1; + } + pPk->uniqNotNull = 1; + + /* The root page of the PRIMARY KEY is the table root page */ + pPk->tnum = pTab->tnum; + + /* Update the in-memory representation of all UNIQUE indices by converting + ** the final rowid column into one or more columns of the PRIMARY KEY. + */ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int n; + if( IsPrimaryKeyIndex(pIdx) ) continue; + for(i=n=0; iaiColumn, pIdx->nKeyCol, pPk->aiColumn[i]) ) n++; + } + if( n==0 ){ + /* This index is a superset of the primary key */ + pIdx->nColumn = pIdx->nKeyCol; + continue; + } + if( resizeIndexObject(db, pIdx, pIdx->nKeyCol+n) ) return; + for(i=0, j=pIdx->nKeyCol; iaiColumn, pIdx->nKeyCol, pPk->aiColumn[i]) ){ + pIdx->aiColumn[j] = pPk->aiColumn[i]; + pIdx->azColl[j] = pPk->azColl[i]; + j++; } } + assert( pIdx->nColumn>=pIdx->nKeyCol+n ); + assert( pIdx->nColumn>=j ); } - /* Open the sqlite_stat[12] tables for writing. */ - for(i=0; inCol ){ + if( resizeIndexObject(db, pPk, pTab->nCol) ) return; + for(i=0, j=nPk; inCol; i++){ + if( !hasColumn(pPk->aiColumn, j, i) ){ + assert( jnColumn ); + pPk->aiColumn[j] = i; + pPk->azColl[j] = "BINARY"; + j++; + } + } + assert( pPk->nColumn==j ); + assert( pTab->nCol==j ); + }else{ + pPk->nColumn = pTab->nCol; } } /* -** Generate code to do an analysis of all indices associated with -** a single table. +** This routine is called to report the final ")" that terminates +** a CREATE TABLE statement. +** +** The table structure that other action routines have been building +** is added to the internal hash tables, assuming no errors have +** occurred. +** +** An entry for the table is made in the master table on disk, unless +** this is a temporary table or db->init.busy==1. When db->init.busy==1 +** it means we are reading the sqlite_master table because we just +** connected to the database or because the sqlite_master table has +** recently changed, so the entry for this table already exists in +** the sqlite_master table. We do not want to create it again. +** +** If the pSelect argument is not NULL, it means that this routine +** was called to create a table generated from a +** "CREATE TABLE ... AS SELECT ..." statement. The column names of +** the new table will match the result set of the SELECT. */ -static void analyzeOneTable( - Parse *pParse, /* Parser context */ - Table *pTab, /* Table whose indices are to be analyzed */ - Index *pOnlyIdx, /* If not NULL, only analyze this one index */ - int iStatCur, /* Index of VdbeCursor that writes the sqlite_stat1 table */ - int iMem /* Available memory locations begin here */ +SQLITE_PRIVATE void sqlite3EndTable( + Parse *pParse, /* Parse context */ + Token *pCons, /* The ',' token after the last column defn. */ + Token *pEnd, /* The ')' before options in the CREATE TABLE */ + u8 tabOpts, /* Extra table options. Usually 0. */ + Select *pSelect /* Select from a "CREATE ... AS SELECT" */ ){ - sqlite3 *db = pParse->db; /* Database handle */ - Index *pIdx; /* An index to being analyzed */ - int iIdxCur; /* Cursor open on index being analyzed */ - Vdbe *v; /* The virtual machine being built up */ - int i; /* Loop counter */ - int topOfLoop; /* The top of the loop */ - int endOfLoop; /* The end of the loop */ - int jZeroRows = -1; /* Jump from here if number of rows is zero */ - int iDb; /* Index of database containing pTab */ - int regTabname = iMem++; /* Register containing table name */ - int regIdxname = iMem++; /* Register containing index name */ - int regSampleno = iMem++; /* Register containing next sample number */ - int regCol = iMem++; /* Content of a column analyzed table */ - int regRec = iMem++; /* Register holding completed record */ - int regTemp = iMem++; /* Temporary use register */ - int regRowid = iMem++; /* Rowid for the inserted record */ - -#ifdef SQLITE_ENABLE_STAT2 - int addr = 0; /* Instruction address */ - int regTemp2 = iMem++; /* Temporary use register */ - int regSamplerecno = iMem++; /* Index of next sample to record */ - int regRecno = iMem++; /* Current sample index */ - int regLast = iMem++; /* Index of last sample to record */ - int regFirst = iMem++; /* Index of first sample to record */ -#endif + Table *p; /* The new table */ + sqlite3 *db = pParse->db; /* The database connection */ + int iDb; /* Database in which the table lives */ + Index *pIdx; /* An implied index of the table */ - v = sqlite3GetVdbe(pParse); - if( v==0 || NEVER(pTab==0) ){ - return; - } - if( pTab->tnum==0 ){ - /* Do not gather statistics on views or virtual tables */ + if( (pEnd==0 && pSelect==0) || db->mallocFailed ){ return; } - if( memcmp(pTab->zName, "sqlite_", 7)==0 ){ - /* Do not gather statistics on system tables */ - return; + p = pParse->pNewTable; + if( p==0 ) return; + + assert( !db->init.busy || !pSelect ); + + /* If the db->init.busy is 1 it means we are reading the SQL off the + ** "sqlite_master" or "sqlite_temp_master" table on the disk. + ** So do not write to the disk again. Extract the root page number + ** for the table from the db->init.newTnum field. (The page number + ** should have been put there by the sqliteOpenCb routine.) + */ + if( db->init.busy ){ + p->tnum = db->init.newTnum; } - assert( sqlite3BtreeHoldsAllMutexes(db) ); - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - assert( iDb>=0 ); - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); -#ifndef SQLITE_OMIT_AUTHORIZATION - if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0, - db->aDb[iDb].zName ) ){ - return; + + /* Special processing for WITHOUT ROWID Tables */ + if( tabOpts & TF_WithoutRowid ){ + if( (p->tabFlags & TF_Autoincrement) ){ + sqlite3ErrorMsg(pParse, + "AUTOINCREMENT not allowed on WITHOUT ROWID tables"); + return; + } + if( (p->tabFlags & TF_HasPrimaryKey)==0 ){ + sqlite3ErrorMsg(pParse, "PRIMARY KEY missing on table %s", p->zName); + }else{ + p->tabFlags |= TF_WithoutRowid; + convertToWithoutRowidTable(pParse, p); + } } -#endif - /* Establish a read-lock on the table at the shared-cache level. */ - sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + iDb = sqlite3SchemaToIndex(db, p->pSchema); - iIdxCur = pParse->nTab++; - sqlite3VdbeAddOp4(v, OP_String8, 0, regTabname, 0, pTab->zName, 0); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - int nCol; - KeyInfo *pKey; +#ifndef SQLITE_OMIT_CHECK + /* Resolve names in all CHECK constraint expressions. + */ + if( p->pCheck ){ + sqlite3ResolveSelfReference(pParse, p, NC_IsCheck, 0, p->pCheck); + } +#endif /* !defined(SQLITE_OMIT_CHECK) */ - if( pOnlyIdx && pOnlyIdx!=pIdx ) continue; - nCol = pIdx->nColumn; - pKey = sqlite3IndexKeyinfo(pParse, pIdx); - if( iMem+1+(nCol*2)>pParse->nMem ){ - pParse->nMem = iMem+1+(nCol*2); - } + /* Estimate the average row size for the table and for all implied indices */ + estimateTableWidth(p); + for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){ + estimateIndexWidth(pIdx); + } - /* Open a cursor to the index to be analyzed. */ - assert( iDb==sqlite3SchemaToIndex(db, pIdx->pSchema) ); - sqlite3VdbeAddOp4(v, OP_OpenRead, iIdxCur, pIdx->tnum, iDb, - (char *)pKey, P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pIdx->zName)); + /* If not initializing, then create a record for the new table + ** in the SQLITE_MASTER table of the database. + ** + ** If this is a TEMPORARY table, write the entry into the auxiliary + ** file instead of into the main database file. + */ + if( !db->init.busy ){ + int n; + Vdbe *v; + char *zType; /* "view" or "table" */ + char *zType2; /* "VIEW" or "TABLE" */ + char *zStmt; /* Text of the CREATE TABLE or CREATE VIEW statement */ - /* Populate the register containing the index name. */ - sqlite3VdbeAddOp4(v, OP_String8, 0, regIdxname, 0, pIdx->zName, 0); - -#ifdef SQLITE_ENABLE_STAT2 - - /* If this iteration of the loop is generating code to analyze the - ** first index in the pTab->pIndex list, then register regLast has - ** not been populated. In this case populate it now. */ - if( pTab->pIndex==pIdx ){ - sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES, regSamplerecno); - sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES*2-1, regTemp); - sqlite3VdbeAddOp2(v, OP_Integer, SQLITE_INDEX_SAMPLES*2, regTemp2); - - sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regLast); - sqlite3VdbeAddOp2(v, OP_Null, 0, regFirst); - addr = sqlite3VdbeAddOp3(v, OP_Lt, regSamplerecno, 0, regLast); - sqlite3VdbeAddOp3(v, OP_Divide, regTemp2, regLast, regFirst); - sqlite3VdbeAddOp3(v, OP_Multiply, regLast, regTemp, regLast); - sqlite3VdbeAddOp2(v, OP_AddImm, regLast, SQLITE_INDEX_SAMPLES*2-2); - sqlite3VdbeAddOp3(v, OP_Divide, regTemp2, regLast, regLast); - sqlite3VdbeJumpHere(v, addr); - } + v = sqlite3GetVdbe(pParse); + if( NEVER(v==0) ) return; + + sqlite3VdbeAddOp1(v, OP_Close, 0); - /* Zero the regSampleno and regRecno registers. */ - sqlite3VdbeAddOp2(v, OP_Integer, 0, regSampleno); - sqlite3VdbeAddOp2(v, OP_Integer, 0, regRecno); - sqlite3VdbeAddOp2(v, OP_Copy, regFirst, regSamplerecno); + /* + ** Initialize zType for the new view or table. + */ + if( p->pSelect==0 ){ + /* A regular table */ + zType = "table"; + zType2 = "TABLE"; +#ifndef SQLITE_OMIT_VIEW + }else{ + /* A view */ + zType = "view"; + zType2 = "VIEW"; #endif + } - /* The block of memory cells initialized here is used as follows. - ** - ** iMem: - ** The total number of rows in the table. - ** - ** iMem+1 .. iMem+nCol: - ** Number of distinct entries in index considering the - ** left-most N columns only, where N is between 1 and nCol, - ** inclusive. + /* If this is a CREATE TABLE xx AS SELECT ..., execute the SELECT + ** statement to populate the new table. The root-page number for the + ** new table is in register pParse->regRoot. ** - ** iMem+nCol+1 .. Mem+2*nCol: - ** Previous value of indexed columns, from left to right. + ** Once the SELECT has been coded by sqlite3Select(), it is in a + ** suitable state to query for the column names and types to be used + ** by the new table. ** - ** Cells iMem through iMem+nCol are initialized to 0. The others are - ** initialized to contain an SQL NULL. + ** A shared-cache write-lock is not required to write to the new table, + ** as a schema-lock must have already been obtained to create it. Since + ** a schema-lock excludes all other database users, the write-lock would + ** be redundant. */ - for(i=0; i<=nCol; i++){ - sqlite3VdbeAddOp2(v, OP_Integer, 0, iMem+i); - } - for(i=0; inTab==1); + sqlite3VdbeAddOp3(v, OP_OpenWrite, 1, pParse->regRoot, iDb); + sqlite3VdbeChangeP5(v, OPFLAG_P2ISREG); + pParse->nTab = 2; + sqlite3SelectDestInit(&dest, SRT_Table, 1); + sqlite3Select(pParse, pSelect, &dest); + sqlite3VdbeAddOp1(v, OP_Close, 1); + if( pParse->nErr==0 ){ + pSelTab = sqlite3ResultSetOfSelect(pParse, pSelect); + if( pSelTab==0 ) return; + assert( p->aCol==0 ); + p->nCol = pSelTab->nCol; + p->aCol = pSelTab->aCol; + pSelTab->nCol = 0; + pSelTab->aCol = 0; + sqlite3DeleteTable(db, pSelTab); } - assert( pIdx->azColl!=0 ); - assert( pIdx->azColl[i]!=0 ); - pColl = sqlite3LocateCollSeq(pParse, pIdx->azColl[i]); - sqlite3VdbeAddOp4(v, OP_Ne, regCol, 0, iMem+nCol+i+1, - (char*)pColl, P4_COLLSEQ); - sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); - } - if( db->mallocFailed ){ - /* If a malloc failure has occurred, then the result of the expression - ** passed as the second argument to the call to sqlite3VdbeJumpHere() - ** below may be negative. Which causes an assert() to fail (or an - ** out-of-bounds write if SQLITE_DEBUG is not defined). */ - return; } - sqlite3VdbeAddOp2(v, OP_Goto, 0, endOfLoop); - for(i=0; isLastToken : pEnd; + n = (int)(pEnd2->z - pParse->sNameToken.z); + if( pEnd2->z[0]!=';' ) n += pEnd2->n; + zStmt = sqlite3MPrintf(db, + "CREATE %s %.*s", zType2, n, pParse->sNameToken.z + ); } - /* End of the analysis loop. */ - sqlite3VdbeResolveLabel(v, endOfLoop); - sqlite3VdbeAddOp2(v, OP_Next, iIdxCur, topOfLoop); - sqlite3VdbeAddOp1(v, OP_Close, iIdxCur); + /* A slot for the record has already been allocated in the + ** SQLITE_MASTER table. We just need to update that slot with all + ** the information we've collected. + */ + sqlite3NestedParse(pParse, + "UPDATE %Q.%s " + "SET type='%s', name=%Q, tbl_name=%Q, rootpage=#%d, sql=%Q " + "WHERE rowid=#%d", + db->aDb[iDb].zName, SCHEMA_TABLE(iDb), + zType, + p->zName, + p->zName, + pParse->regRoot, + zStmt, + pParse->regRowid + ); + sqlite3DbFree(db, zStmt); + sqlite3ChangeCookie(pParse, iDb); - /* Store the results in sqlite_stat1. - ** - ** The result is a single row of the sqlite_stat1 table. The first - ** two columns are the names of the table and index. The third column - ** is a string composed of a list of integer statistics about the - ** index. The first integer in the list is the total number of entries - ** in the index. There is one additional integer in the list for each - ** column of the table. This additional integer is a guess of how many - ** rows of the table the index will select. If D is the count of distinct - ** values and K is the total number of rows, then the integer is computed - ** as: - ** - ** I = (K+D-1)/D - ** - ** If K==0 then no entry is made into the sqlite_stat1 table. - ** If K>0 then it is always the case the D>0 so division by zero - ** is never possible. +#ifndef SQLITE_OMIT_AUTOINCREMENT + /* Check to see if we need to create an sqlite_sequence table for + ** keeping track of autoincrement keys. */ - sqlite3VdbeAddOp2(v, OP_SCopy, iMem, regSampleno); - if( jZeroRows<0 ){ - jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, iMem); + if( p->tabFlags & TF_Autoincrement ){ + Db *pDb = &db->aDb[iDb]; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + if( pDb->pSchema->pSeqTab==0 ){ + sqlite3NestedParse(pParse, + "CREATE TABLE %Q.sqlite_sequence(name,seq)", + pDb->zName + ); + } } - for(i=0; ipIndex==0 ){ - sqlite3VdbeAddOp3(v, OP_OpenRead, iIdxCur, pTab->tnum, iDb); - VdbeComment((v, "%s", pTab->zName)); - sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regSampleno); - sqlite3VdbeAddOp1(v, OP_Close, iIdxCur); - jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, regSampleno); - }else{ - sqlite3VdbeJumpHere(v, jZeroRows); - jZeroRows = sqlite3VdbeAddOp0(v, OP_Goto); + /* Reparse everything to update our internal data structures */ + sqlite3VdbeAddParseSchemaOp(v, iDb, + sqlite3MPrintf(db, "tbl_name='%q' AND type!='trigger'", p->zName)); } - sqlite3VdbeAddOp2(v, OP_Null, 0, regIdxname); - sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regRec, "aaa", 0); - sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regRowid); - sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regRec, regRowid); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - if( pParse->nMemnMem = regRec; - sqlite3VdbeJumpHere(v, jZeroRows); -} -/* -** Generate code that will cause the most recent index analysis to -** be loaded into internal hash tables where is can be used. -*/ -static void loadAnalysis(Parse *pParse, int iDb){ - Vdbe *v = sqlite3GetVdbe(pParse); - if( v ){ - sqlite3VdbeAddOp1(v, OP_LoadAnalysis, iDb); - } -} -/* -** Generate code that will do an analysis of an entire database -*/ -static void analyzeDatabase(Parse *pParse, int iDb){ - sqlite3 *db = pParse->db; - Schema *pSchema = db->aDb[iDb].pSchema; /* Schema of database iDb */ - HashElem *k; - int iStatCur; - int iMem; + /* Add the table to the in-memory representation of the database. + */ + if( db->init.busy ){ + Table *pOld; + Schema *pSchema = p->pSchema; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pOld = sqlite3HashInsert(&pSchema->tblHash, p->zName, p); + if( pOld ){ + assert( p==pOld ); /* Malloc must have failed inside HashInsert() */ + db->mallocFailed = 1; + return; + } + pParse->pNewTable = 0; + db->flags |= SQLITE_InternChanges; - sqlite3BeginWriteOperation(pParse, 0, iDb); - iStatCur = pParse->nTab; - pParse->nTab += 2; - openStatTable(pParse, iDb, iStatCur, 0, 0); - iMem = pParse->nMem+1; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - for(k=sqliteHashFirst(&pSchema->tblHash); k; k=sqliteHashNext(k)){ - Table *pTab = (Table*)sqliteHashData(k); - analyzeOneTable(pParse, pTab, 0, iStatCur, iMem); +#ifndef SQLITE_OMIT_ALTERTABLE + if( !p->pSelect ){ + const char *zName = (const char *)pParse->sNameToken.z; + int nName; + assert( !pSelect && pCons && pEnd ); + if( pCons->z==0 ){ + pCons = pEnd; + } + nName = (int)((const char *)pCons->z - zName); + p->addColOffset = 13 + sqlite3Utf8CharLen(zName, nName); + } +#endif } - loadAnalysis(pParse, iDb); } +#ifndef SQLITE_OMIT_VIEW /* -** Generate code that will do an analysis of a single table in -** a database. If pOnlyIdx is not NULL then it is a single index -** in pTab that should be analyzed. +** The parser calls this routine in order to create a new VIEW */ -static void analyzeTable(Parse *pParse, Table *pTab, Index *pOnlyIdx){ +SQLITE_PRIVATE void sqlite3CreateView( + Parse *pParse, /* The parsing context */ + Token *pBegin, /* The CREATE token that begins the statement */ + Token *pName1, /* The token that holds the name of the view */ + Token *pName2, /* The token that holds the name of the view */ + Select *pSelect, /* A SELECT statement that will become the new view */ + int isTemp, /* TRUE for a TEMPORARY view */ + int noErr /* Suppress error messages if VIEW already exists */ +){ + Table *p; + int n; + const char *z; + Token sEnd; + DbFixer sFix; + Token *pName = 0; int iDb; - int iStatCur; - - assert( pTab!=0 ); - assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - sqlite3BeginWriteOperation(pParse, 0, iDb); - iStatCur = pParse->nTab; - pParse->nTab += 2; - if( pOnlyIdx ){ - openStatTable(pParse, iDb, iStatCur, pOnlyIdx->zName, "idx"); - }else{ - openStatTable(pParse, iDb, iStatCur, pTab->zName, "tbl"); - } - analyzeOneTable(pParse, pTab, pOnlyIdx, iStatCur, pParse->nMem+1); - loadAnalysis(pParse, iDb); -} - -/* -** Generate code for the ANALYZE command. The parser calls this routine -** when it recognizes an ANALYZE command. -** -** ANALYZE -- 1 -** ANALYZE -- 2 -** ANALYZE ?.? -- 3 -** -** Form 1 causes all indices in all attached databases to be analyzed. -** Form 2 analyzes all indices the single database named. -** Form 3 analyzes all indices associated with the named table. -*/ -SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){ sqlite3 *db = pParse->db; - int iDb; - int i; - char *z, *zDb; - Table *pTab; - Index *pIdx; - Token *pTableName; - /* Read the database schema. If an error occurs, leave an error message - ** and code in pParse and return NULL. */ - assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + if( pParse->nVar>0 ){ + sqlite3ErrorMsg(pParse, "parameters are not allowed in views"); + sqlite3SelectDelete(db, pSelect); return; } - - assert( pName2!=0 || pName1==0 ); - if( pName1==0 ){ - /* Form 1: Analyze everything */ - for(i=0; inDb; i++){ - if( i==1 ) continue; /* Do not analyze the TEMP database */ - analyzeDatabase(pParse, i); - } - }else if( pName2->n==0 ){ - /* Form 2: Analyze the database or table named */ - iDb = sqlite3FindDb(db, pName1); - if( iDb>=0 ){ - analyzeDatabase(pParse, iDb); - }else{ - z = sqlite3NameFromToken(db, pName1); - if( z ){ - if( (pIdx = sqlite3FindIndex(db, z, 0))!=0 ){ - analyzeTable(pParse, pIdx->pTable, pIdx); - }else if( (pTab = sqlite3LocateTable(pParse, 0, z, 0))!=0 ){ - analyzeTable(pParse, pTab, 0); - } - sqlite3DbFree(db, z); - } - } - }else{ - /* Form 3: Analyze the fully qualified table name */ - iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pTableName); - if( iDb>=0 ){ - zDb = db->aDb[iDb].zName; - z = sqlite3NameFromToken(db, pTableName); - if( z ){ - if( (pIdx = sqlite3FindIndex(db, z, zDb))!=0 ){ - analyzeTable(pParse, pIdx->pTable, pIdx); - }else if( (pTab = sqlite3LocateTable(pParse, 0, z, zDb))!=0 ){ - analyzeTable(pParse, pTab, 0); - } - sqlite3DbFree(db, z); - } - } - } -} - -/* -** Used to pass information from the analyzer reader through to the -** callback routine. -*/ -typedef struct analysisInfo analysisInfo; -struct analysisInfo { - sqlite3 *db; - const char *zDatabase; -}; - -/* -** This callback is invoked once for each index when reading the -** sqlite_stat1 table. -** -** argv[0] = name of the table -** argv[1] = name of the index (might be NULL) -** argv[2] = results of analysis - on integer for each column -** -** Entries for which argv[1]==NULL simply record the number of rows in -** the table. -*/ -static int analysisLoader(void *pData, int argc, char **argv, char **NotUsed){ - analysisInfo *pInfo = (analysisInfo*)pData; - Index *pIndex; - Table *pTable; - int i, c, n; - unsigned int v; - const char *z; - - assert( argc==3 ); - UNUSED_PARAMETER2(NotUsed, argc); - - if( argv==0 || argv[0]==0 || argv[2]==0 ){ - return 0; + sqlite3StartTable(pParse, pName1, pName2, isTemp, 1, 0, noErr); + p = pParse->pNewTable; + if( p==0 || pParse->nErr ){ + sqlite3SelectDelete(db, pSelect); + return; } - pTable = sqlite3FindTable(pInfo->db, argv[0], pInfo->zDatabase); - if( pTable==0 ){ - return 0; + sqlite3TwoPartName(pParse, pName1, pName2, &pName); + iDb = sqlite3SchemaToIndex(db, p->pSchema); + sqlite3FixInit(&sFix, pParse, iDb, "view", pName); + if( sqlite3FixSelect(&sFix, pSelect) ){ + sqlite3SelectDelete(db, pSelect); + return; } - if( argv[1] ){ - pIndex = sqlite3FindIndex(pInfo->db, argv[1], pInfo->zDatabase); - }else{ - pIndex = 0; + + /* Make a copy of the entire SELECT statement that defines the view. + ** This will force all the Expr.token.z values to be dynamically + ** allocated rather than point to the input string - which means that + ** they will persist after the current sqlite3_exec() call returns. + */ + p->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + sqlite3SelectDelete(db, pSelect); + if( db->mallocFailed ){ + return; } - n = pIndex ? pIndex->nColumn : 0; - z = argv[2]; - for(i=0; *z && i<=n; i++){ - v = 0; - while( (c=z[0])>='0' && c<='9' ){ - v = v*10 + c - '0'; - z++; - } - if( i==0 ) pTable->nRowEst = v; - if( pIndex==0 ) break; - pIndex->aiRowEst[i] = v; - if( *z==' ' ) z++; - if( memcmp(z, "unordered", 10)==0 ){ - pIndex->bUnordered = 1; - break; - } + if( !db->init.busy ){ + sqlite3ViewGetColumnNames(pParse, p); } - return 0; -} -/* -** If the Index.aSample variable is not NULL, delete the aSample[] array -** and its contents. -*/ -SQLITE_PRIVATE void sqlite3DeleteIndexSamples(sqlite3 *db, Index *pIdx){ -#ifdef SQLITE_ENABLE_STAT2 - if( pIdx->aSample ){ - int j; - for(j=0; jaSample[j]; - if( p->eType==SQLITE_TEXT || p->eType==SQLITE_BLOB ){ - sqlite3DbFree(db, p->u.z); - } - } - sqlite3DbFree(db, pIdx->aSample); + /* Locate the end of the CREATE VIEW statement. Make sEnd point to + ** the end. + */ + sEnd = pParse->sLastToken; + if( ALWAYS(sEnd.z[0]!=0) && sEnd.z[0]!=';' ){ + sEnd.z += sEnd.n; } -#else - UNUSED_PARAMETER(db); - UNUSED_PARAMETER(pIdx); -#endif + sEnd.n = 0; + n = (int)(sEnd.z - pBegin->z); + z = pBegin->z; + while( ALWAYS(n>0) && sqlite3Isspace(z[n-1]) ){ n--; } + sEnd.z = &z[n-1]; + sEnd.n = 1; + + /* Use sqlite3EndTable() to add the view to the SQLITE_MASTER table */ + sqlite3EndTable(pParse, 0, &sEnd, 0, 0); + return; } +#endif /* SQLITE_OMIT_VIEW */ +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) /* -** Load the content of the sqlite_stat1 and sqlite_stat2 tables. The -** contents of sqlite_stat1 are used to populate the Index.aiRowEst[] -** arrays. The contents of sqlite_stat2 are used to populate the -** Index.aSample[] arrays. -** -** If the sqlite_stat1 table is not present in the database, SQLITE_ERROR -** is returned. In this case, even if SQLITE_ENABLE_STAT2 was defined -** during compilation and the sqlite_stat2 table is present, no data is -** read from it. -** -** If SQLITE_ENABLE_STAT2 was defined during compilation and the -** sqlite_stat2 table is not present in the database, SQLITE_ERROR is -** returned. However, in this case, data is read from the sqlite_stat1 -** table (if it is present) before returning. -** -** If an OOM error occurs, this function always sets db->mallocFailed. -** This means if the caller does not care about other errors, the return -** code may be ignored. +** The Table structure pTable is really a VIEW. Fill in the names of +** the columns of the view in the pTable structure. Return the number +** of errors. If an error is seen leave an error message in pParse->zErrMsg. */ -SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3 *db, int iDb){ - analysisInfo sInfo; - HashElem *i; - char *zSql; - int rc; - - assert( iDb>=0 && iDbnDb ); - assert( db->aDb[iDb].pBt!=0 ); +SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse *pParse, Table *pTable){ + Table *pSelTab; /* A fake table from which we get the result set */ + Select *pSel; /* Copy of the SELECT that implements the view */ + int nErr = 0; /* Number of errors encountered */ + int n; /* Temporarily holds the number of cursors assigned */ + sqlite3 *db = pParse->db; /* Database connection for malloc errors */ + sqlite3_xauth xAuth; /* Saved xAuth pointer */ - /* Clear any prior statistics */ - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ - Index *pIdx = sqliteHashData(i); - sqlite3DefaultRowEst(pIdx); - sqlite3DeleteIndexSamples(db, pIdx); - pIdx->aSample = 0; - } + assert( pTable ); - /* Check to make sure the sqlite_stat1 table exists */ - sInfo.db = db; - sInfo.zDatabase = db->aDb[iDb].zName; - if( sqlite3FindTable(db, "sqlite_stat1", sInfo.zDatabase)==0 ){ +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( sqlite3VtabCallConnect(pParse, pTable) ){ return SQLITE_ERROR; } + if( IsVirtual(pTable) ) return 0; +#endif - /* Load new statistics out of the sqlite_stat1 table */ - zSql = sqlite3MPrintf(db, - "SELECT tbl, idx, stat FROM %Q.sqlite_stat1", sInfo.zDatabase); - if( zSql==0 ){ - rc = SQLITE_NOMEM; - }else{ - rc = sqlite3_exec(db, zSql, analysisLoader, &sInfo, 0); - sqlite3DbFree(db, zSql); - } - +#ifndef SQLITE_OMIT_VIEW + /* A positive nCol means the columns names for this view are + ** already known. + */ + if( pTable->nCol>0 ) return 0; - /* Load the statistics from the sqlite_stat2 table. */ -#ifdef SQLITE_ENABLE_STAT2 - if( rc==SQLITE_OK && !sqlite3FindTable(db, "sqlite_stat2", sInfo.zDatabase) ){ - rc = SQLITE_ERROR; + /* A negative nCol is a special marker meaning that we are currently + ** trying to compute the column names. If we enter this routine with + ** a negative nCol, it means two or more views form a loop, like this: + ** + ** CREATE VIEW one AS SELECT * FROM two; + ** CREATE VIEW two AS SELECT * FROM one; + ** + ** Actually, the error above is now caught prior to reaching this point. + ** But the following test is still important as it does come up + ** in the following: + ** + ** CREATE TABLE main.ex1(a); + ** CREATE TEMP VIEW ex1 AS SELECT a FROM ex1; + ** SELECT * FROM temp.ex1; + */ + if( pTable->nCol<0 ){ + sqlite3ErrorMsg(pParse, "view %s is circularly defined", pTable->zName); + return 1; } - if( rc==SQLITE_OK ){ - sqlite3_stmt *pStmt = 0; + assert( pTable->nCol>=0 ); - zSql = sqlite3MPrintf(db, - "SELECT idx,sampleno,sample FROM %Q.sqlite_stat2", sInfo.zDatabase); - if( !zSql ){ - rc = SQLITE_NOMEM; + /* If we get this far, it means we need to compute the table names. + ** Note that the call to sqlite3ResultSetOfSelect() will expand any + ** "*" elements in the results set of the view and will assign cursors + ** to the elements of the FROM clause. But we do not want these changes + ** to be permanent. So the computation is done on a copy of the SELECT + ** statement that defines the view. + */ + assert( pTable->pSelect ); + pSel = sqlite3SelectDup(db, pTable->pSelect, 0); + if( pSel ){ + u8 enableLookaside = db->lookaside.bEnabled; + n = pParse->nTab; + sqlite3SrcListAssignCursors(pParse, pSel->pSrc); + pTable->nCol = -1; + db->lookaside.bEnabled = 0; +#ifndef SQLITE_OMIT_AUTHORIZATION + xAuth = db->xAuth; + db->xAuth = 0; + pSelTab = sqlite3ResultSetOfSelect(pParse, pSel); + db->xAuth = xAuth; +#else + pSelTab = sqlite3ResultSetOfSelect(pParse, pSel); +#endif + db->lookaside.bEnabled = enableLookaside; + pParse->nTab = n; + if( pSelTab ){ + assert( pTable->aCol==0 ); + pTable->nCol = pSelTab->nCol; + pTable->aCol = pSelTab->aCol; + pSelTab->nCol = 0; + pSelTab->aCol = 0; + sqlite3DeleteTable(db, pSelTab); + assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) ); + pTable->pSchema->schemaFlags |= DB_UnresetViews; }else{ - rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); - sqlite3DbFree(db, zSql); - } - - if( rc==SQLITE_OK ){ - while( sqlite3_step(pStmt)==SQLITE_ROW ){ - char *zIndex; /* Index name */ - Index *pIdx; /* Pointer to the index object */ - - zIndex = (char *)sqlite3_column_text(pStmt, 0); - pIdx = zIndex ? sqlite3FindIndex(db, zIndex, sInfo.zDatabase) : 0; - if( pIdx ){ - int iSample = sqlite3_column_int(pStmt, 1); - if( iSample=0 ){ - int eType = sqlite3_column_type(pStmt, 2); - - if( pIdx->aSample==0 ){ - static const int sz = sizeof(IndexSample)*SQLITE_INDEX_SAMPLES; - pIdx->aSample = (IndexSample *)sqlite3DbMallocRaw(0, sz); - if( pIdx->aSample==0 ){ - db->mallocFailed = 1; - break; - } - memset(pIdx->aSample, 0, sz); - } - - assert( pIdx->aSample ); - { - IndexSample *pSample = &pIdx->aSample[iSample]; - pSample->eType = (u8)eType; - if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){ - pSample->u.r = sqlite3_column_double(pStmt, 2); - }else if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){ - const char *z = (const char *)( - (eType==SQLITE_BLOB) ? - sqlite3_column_blob(pStmt, 2): - sqlite3_column_text(pStmt, 2) - ); - int n = sqlite3_column_bytes(pStmt, 2); - if( n>24 ){ - n = 24; - } - pSample->nByte = (u8)n; - if( n < 1){ - pSample->u.z = 0; - }else{ - pSample->u.z = sqlite3DbStrNDup(0, z, n); - if( pSample->u.z==0 ){ - db->mallocFailed = 1; - break; - } - } - } - } - } - } - } - rc = sqlite3_finalize(pStmt); + pTable->nCol = 0; + nErr++; } + sqlite3SelectDelete(db, pSel); + } else { + nErr++; } -#endif - - if( rc==SQLITE_NOMEM ){ - db->mallocFailed = 1; - } - return rc; +#endif /* SQLITE_OMIT_VIEW */ + return nErr; } +#endif /* !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) */ - -#endif /* SQLITE_OMIT_ANALYZE */ - -/************** End of analyze.c *********************************************/ -/************** Begin file attach.c ******************************************/ -/* -** 2003 April 6 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code used to implement the ATTACH and DETACH commands. -*/ - -#ifndef SQLITE_OMIT_ATTACH +#ifndef SQLITE_OMIT_VIEW /* -** Resolve an expression that was part of an ATTACH or DETACH statement. This -** is slightly different from resolving a normal SQL expression, because simple -** identifiers are treated as strings, not possible column names or aliases. -** -** i.e. if the parser sees: -** -** ATTACH DATABASE abc AS def -** -** it treats the two expressions as literal strings 'abc' and 'def' instead of -** looking for columns of the same name. -** -** This only applies to the root node of pExpr, so the statement: -** -** ATTACH DATABASE abc||def AS 'db2' -** -** will fail because neither abc or def can be resolved. +** Clear the column names from every VIEW in database idx. */ -static int resolveAttachExpr(NameContext *pName, Expr *pExpr) -{ - int rc = SQLITE_OK; - if( pExpr ){ - if( pExpr->op!=TK_ID ){ - rc = sqlite3ResolveExprNames(pName, pExpr); - if( rc==SQLITE_OK && !sqlite3ExprIsConstant(pExpr) ){ - sqlite3ErrorMsg(pName->pParse, "invalid name: \"%s\"", pExpr->u.zToken); - return SQLITE_ERROR; - } - }else{ - pExpr->op = TK_STRING; +static void sqliteViewResetAll(sqlite3 *db, int idx){ + HashElem *i; + assert( sqlite3SchemaMutexHeld(db, idx, 0) ); + if( !DbHasProperty(db, idx, DB_UnresetViews) ) return; + for(i=sqliteHashFirst(&db->aDb[idx].pSchema->tblHash); i;i=sqliteHashNext(i)){ + Table *pTab = sqliteHashData(i); + if( pTab->pSelect ){ + sqliteDeleteColumnNames(db, pTab); + pTab->aCol = 0; + pTab->nCol = 0; } } - return rc; + DbClearProperty(db, idx, DB_UnresetViews); } +#else +# define sqliteViewResetAll(A,B) +#endif /* SQLITE_OMIT_VIEW */ /* -** An SQL user-function registered to do the work of an ATTACH statement. The -** three arguments to the function come directly from an attach statement: -** -** ATTACH DATABASE x AS y KEY z -** -** SELECT sqlite_attach(x, y, z) +** This function is called by the VDBE to adjust the internal schema +** used by SQLite when the btree layer moves a table root page. The +** root-page of a table or index in database iDb has changed from iFrom +** to iTo. ** -** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the -** third argument. +** Ticket #1728: The symbol table might still contain information +** on tables and/or indices that are the process of being deleted. +** If you are unlucky, one of those deleted indices or tables might +** have the same rootpage number as the real table or index that is +** being moved. So we cannot stop searching after the first match +** because the first match might be for one of the deleted indices +** or tables and not the table/index that is actually being moved. +** We must continue looping until all tables and indices with +** rootpage==iFrom have been converted to have a rootpage of iTo +** in order to be certain that we got the right one. */ -static void attachFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - int i; - int rc = 0; - sqlite3 *db = sqlite3_context_db_handle(context); - const char *zName; - const char *zFile; - char *zPath = 0; - char *zErr = 0; - unsigned int flags; - Db *aNew; - char *zErrDyn = 0; - sqlite3_vfs *pVfs; - - UNUSED_PARAMETER(NotUsed); - - zFile = (const char *)sqlite3_value_text(argv[0]); - zName = (const char *)sqlite3_value_text(argv[1]); - if( zFile==0 ) zFile = ""; - if( zName==0 ) zName = ""; +#ifndef SQLITE_OMIT_AUTOVACUUM +SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3 *db, int iDb, int iFrom, int iTo){ + HashElem *pElem; + Hash *pHash; + Db *pDb; - /* Check for the following errors: - ** - ** * Too many attached databases, - ** * Transaction currently open - ** * Specified database name already being used. - */ - if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ - zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", - db->aLimit[SQLITE_LIMIT_ATTACHED] - ); - goto attach_error; - } - if( !db->autoCommit ){ - zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction"); - goto attach_error; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pDb = &db->aDb[iDb]; + pHash = &pDb->pSchema->tblHash; + for(pElem=sqliteHashFirst(pHash); pElem; pElem=sqliteHashNext(pElem)){ + Table *pTab = sqliteHashData(pElem); + if( pTab->tnum==iFrom ){ + pTab->tnum = iTo; + } } - for(i=0; inDb; i++){ - char *z = db->aDb[i].zName; - assert( z && zName ); - if( sqlite3StrICmp(z, zName)==0 ){ - zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); - goto attach_error; + pHash = &pDb->pSchema->idxHash; + for(pElem=sqliteHashFirst(pHash); pElem; pElem=sqliteHashNext(pElem)){ + Index *pIdx = sqliteHashData(pElem); + if( pIdx->tnum==iFrom ){ + pIdx->tnum = iTo; } } +} +#endif - /* Allocate the new entry in the db->aDb[] array and initialise the schema - ** hash tables. +/* +** Write code to erase the table with root-page iTable from database iDb. +** Also write code to modify the sqlite_master table and internal schema +** if a root-page of another table is moved by the btree-layer whilst +** erasing iTable (this can happen with an auto-vacuum database). +*/ +static void destroyRootPage(Parse *pParse, int iTable, int iDb){ + Vdbe *v = sqlite3GetVdbe(pParse); + int r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_Destroy, iTable, r1, iDb); + sqlite3MayAbort(pParse); +#ifndef SQLITE_OMIT_AUTOVACUUM + /* OP_Destroy stores an in integer r1. If this integer + ** is non-zero, then it is the root page number of a table moved to + ** location iTable. The following code modifies the sqlite_master table to + ** reflect this. + ** + ** The "#NNN" in the SQL is a special constant that means whatever value + ** is in register NNN. See grammar rules associated with the TK_REGISTER + ** token for additional information. */ - if( db->aDb==db->aDbStatic ){ - aNew = sqlite3DbMallocRaw(db, sizeof(db->aDb[0])*3 ); - if( aNew==0 ) return; - memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); - }else{ - aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); - if( aNew==0 ) return; - } - db->aDb = aNew; - aNew = &db->aDb[db->nDb]; - memset(aNew, 0, sizeof(*aNew)); + sqlite3NestedParse(pParse, + "UPDATE %Q.%s SET rootpage=%d WHERE #%d AND rootpage=#%d", + pParse->db->aDb[iDb].zName, SCHEMA_TABLE(iDb), iTable, r1, r1); +#endif + sqlite3ReleaseTempReg(pParse, r1); +} - /* Open the database file. If the btree is successfully opened, use - ** it to obtain the database schema. At this point the schema may - ** or may not be initialised. - */ - flags = db->openFlags; - rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); - return; - } - assert( pVfs ); - flags |= SQLITE_OPEN_MAIN_DB; - rc = sqlite3BtreeOpen(pVfs, zPath, db, &aNew->pBt, 0, flags); - sqlite3_free( zPath ); - db->nDb++; - if( rc==SQLITE_CONSTRAINT ){ - rc = SQLITE_ERROR; - zErrDyn = sqlite3MPrintf(db, "database is already attached"); - }else if( rc==SQLITE_OK ){ - Pager *pPager; - aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt); - if( !aNew->pSchema ){ - rc = SQLITE_NOMEM; - }else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){ - zErrDyn = sqlite3MPrintf(db, - "attached databases must use the same text encoding as main database"); - rc = SQLITE_ERROR; - } - pPager = sqlite3BtreePager(aNew->pBt); - sqlite3PagerLockingMode(pPager, db->dfltLockMode); - sqlite3BtreeSecureDelete(aNew->pBt, - sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) ); - } - aNew->safety_level = 3; - aNew->zName = sqlite3DbStrDup(db, zName); - if( rc==SQLITE_OK && aNew->zName==0 ){ - rc = SQLITE_NOMEM; +/* +** Write VDBE code to erase table pTab and all associated indices on disk. +** Code to update the sqlite_master tables and internal schema definitions +** in case a root-page belonging to another table is moved by the btree layer +** is also added (this can happen with an auto-vacuum database). +*/ +static void destroyTable(Parse *pParse, Table *pTab){ +#ifdef SQLITE_OMIT_AUTOVACUUM + Index *pIdx; + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + destroyRootPage(pParse, pTab->tnum, iDb); + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + destroyRootPage(pParse, pIdx->tnum, iDb); } +#else + /* If the database may be auto-vacuum capable (if SQLITE_OMIT_AUTOVACUUM + ** is not defined), then it is important to call OP_Destroy on the + ** table and index root-pages in order, starting with the numerically + ** largest root-page number. This guarantees that none of the root-pages + ** to be destroyed is relocated by an earlier OP_Destroy. i.e. if the + ** following were coded: + ** + ** OP_Destroy 4 0 + ** ... + ** OP_Destroy 5 0 + ** + ** and root page 5 happened to be the largest root-page number in the + ** database, then root page 5 would be moved to page 4 by the + ** "OP_Destroy 4 0" opcode. The subsequent "OP_Destroy 5 0" would hit + ** a free-list page. + */ + int iTab = pTab->tnum; + int iDestroyed = 0; + while( 1 ){ + Index *pIdx; + int iLargest = 0; -#ifdef SQLITE_HAS_CODEC - if( rc==SQLITE_OK ){ - extern int sqlite3CodecAttach(sqlite3*, int, const void*, int); - extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*); - int nKey; - char *zKey; - int t = sqlite3_value_type(argv[2]); - switch( t ){ - case SQLITE_INTEGER: - case SQLITE_FLOAT: - zErrDyn = sqlite3DbStrDup(db, "Invalid key value"); - rc = SQLITE_ERROR; - break; - - case SQLITE_TEXT: - case SQLITE_BLOB: - nKey = sqlite3_value_bytes(argv[2]); - zKey = (char *)sqlite3_value_blob(argv[2]); - rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey); - break; - - case SQLITE_NULL: - /* No key specified. Use the key from the main database */ - sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey); - if( nKey>0 || sqlite3BtreeGetReserve(db->aDb[0].pBt)>0 ){ - rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey); - } - break; + if( iDestroyed==0 || iTabaDb[] array. i.e. put everything back the way - ** we found it. - */ - if( rc==SQLITE_OK ){ - sqlite3BtreeEnterAll(db); - rc = sqlite3Init(db, &zErrDyn); - sqlite3BtreeLeaveAll(db); - } - if( rc ){ - int iDb = db->nDb - 1; - assert( iDb>=2 ); - if( db->aDb[iDb].pBt ){ - sqlite3BtreeClose(db->aDb[iDb].pBt); - db->aDb[iDb].pBt = 0; - db->aDb[iDb].pSchema = 0; + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int iIdx = pIdx->tnum; + assert( pIdx->pSchema==pTab->pSchema ); + if( (iDestroyed==0 || (iIdxiLargest ){ + iLargest = iIdx; + } } - sqlite3ResetInternalSchema(db, -1); - db->nDb = iDb; - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - db->mallocFailed = 1; - sqlite3DbFree(db, zErrDyn); - zErrDyn = sqlite3MPrintf(db, "out of memory"); - }else if( zErrDyn==0 ){ - zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); + if( iLargest==0 ){ + return; + }else{ + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + assert( iDb>=0 && iDbdb->nDb ); + destroyRootPage(pParse, iLargest, iDb); + iDestroyed = iLargest; } - goto attach_error; - } - - return; - -attach_error: - /* Return an error if we get here */ - if( zErrDyn ){ - sqlite3_result_error(context, zErrDyn, -1); - sqlite3DbFree(db, zErrDyn); } - if( rc ) sqlite3_result_error_code(context, rc); +#endif } /* -** An SQL user-function registered to do the work of an DETACH statement. The -** three arguments to the function come directly from a detach statement: -** -** DETACH DATABASE x -** -** SELECT sqlite_detach(x) +** Remove entries from the sqlite_statN tables (for N in (1,2,3)) +** after a DROP INDEX or DROP TABLE command. */ -static void detachFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv +static void sqlite3ClearStatTables( + Parse *pParse, /* The parsing context */ + int iDb, /* The database number */ + const char *zType, /* "idx" or "tbl" */ + const char *zName /* Name of index or table */ ){ - const char *zName = (const char *)sqlite3_value_text(argv[0]); - sqlite3 *db = sqlite3_context_db_handle(context); int i; - Db *pDb = 0; - char zErr[128]; + const char *zDbName = pParse->db->aDb[iDb].zName; + for(i=1; i<=4; i++){ + char zTab[24]; + sqlite3_snprintf(sizeof(zTab),zTab,"sqlite_stat%d",i); + if( sqlite3FindTable(pParse->db, zTab, zDbName) ){ + sqlite3NestedParse(pParse, + "DELETE FROM %Q.%s WHERE %s=%Q", + zDbName, zTab, zType, zName + ); + } + } +} - UNUSED_PARAMETER(NotUsed); +/* +** Generate code to drop a table. +*/ +SQLITE_PRIVATE void sqlite3CodeDropTable(Parse *pParse, Table *pTab, int iDb, int isView){ + Vdbe *v; + sqlite3 *db = pParse->db; + Trigger *pTrigger; + Db *pDb = &db->aDb[iDb]; - if( zName==0 ) zName = ""; - for(i=0; inDb; i++){ - pDb = &db->aDb[i]; - if( pDb->pBt==0 ) continue; - if( sqlite3StrICmp(pDb->zName, zName)==0 ) break; - } + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + sqlite3BeginWriteOperation(pParse, 1, iDb); - if( i>=db->nDb ){ - sqlite3_snprintf(sizeof(zErr),zErr, "no such database: %s", zName); - goto detach_error; - } - if( i<2 ){ - sqlite3_snprintf(sizeof(zErr),zErr, "cannot detach database %s", zName); - goto detach_error; +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + sqlite3VdbeAddOp0(v, OP_VBegin); } - if( !db->autoCommit ){ - sqlite3_snprintf(sizeof(zErr), zErr, - "cannot DETACH database within transaction"); - goto detach_error; +#endif + + /* Drop all triggers associated with the table being dropped. Code + ** is generated to remove entries from sqlite_master and/or + ** sqlite_temp_master if required. + */ + pTrigger = sqlite3TriggerList(pParse, pTab); + while( pTrigger ){ + assert( pTrigger->pSchema==pTab->pSchema || + pTrigger->pSchema==db->aDb[1].pSchema ); + sqlite3DropTriggerPtr(pParse, pTrigger); + pTrigger = pTrigger->pNext; } - if( sqlite3BtreeIsInReadTrans(pDb->pBt) || sqlite3BtreeIsInBackup(pDb->pBt) ){ - sqlite3_snprintf(sizeof(zErr),zErr, "database %s is locked", zName); - goto detach_error; + +#ifndef SQLITE_OMIT_AUTOINCREMENT + /* Remove any entries of the sqlite_sequence table associated with + ** the table being dropped. This is done before the table is dropped + ** at the btree level, in case the sqlite_sequence table needs to + ** move as a result of the drop (can happen in auto-vacuum mode). + */ + if( pTab->tabFlags & TF_Autoincrement ){ + sqlite3NestedParse(pParse, + "DELETE FROM %Q.sqlite_sequence WHERE name=%Q", + pDb->zName, pTab->zName + ); } +#endif - sqlite3BtreeClose(pDb->pBt); - pDb->pBt = 0; - pDb->pSchema = 0; - sqlite3ResetInternalSchema(db, -1); - return; + /* Drop all SQLITE_MASTER table and index entries that refer to the + ** table. The program name loops through the master table and deletes + ** every row that refers to a table of the same name as the one being + ** dropped. Triggers are handled separately because a trigger can be + ** created in the temp database that refers to a table in another + ** database. + */ + sqlite3NestedParse(pParse, + "DELETE FROM %Q.%s WHERE tbl_name=%Q and type!='trigger'", + pDb->zName, SCHEMA_TABLE(iDb), pTab->zName); + if( !isView && !IsVirtual(pTab) ){ + destroyTable(pParse, pTab); + } -detach_error: - sqlite3_result_error(context, zErr, -1); + /* Remove the table entry from SQLite's internal schema and modify + ** the schema cookie. + */ + if( IsVirtual(pTab) ){ + sqlite3VdbeAddOp4(v, OP_VDestroy, iDb, 0, 0, pTab->zName, 0); + } + sqlite3VdbeAddOp4(v, OP_DropTable, iDb, 0, 0, pTab->zName, 0); + sqlite3ChangeCookie(pParse, iDb); + sqliteViewResetAll(db, iDb); } /* -** This procedure generates VDBE code for a single invocation of either the -** sqlite_detach() or sqlite_attach() SQL user functions. +** This routine is called to do the work of a DROP TABLE statement. +** pName is the name of the table to be dropped. */ -static void codeAttach( - Parse *pParse, /* The parser context */ - int type, /* Either SQLITE_ATTACH or SQLITE_DETACH */ - FuncDef const *pFunc,/* FuncDef wrapper for detachFunc() or attachFunc() */ - Expr *pAuthArg, /* Expression to pass to authorization callback */ - Expr *pFilename, /* Name of database file */ - Expr *pDbname, /* Name of the database to use internally */ - Expr *pKey /* Database key for encryption extension */ -){ - int rc; - NameContext sName; +SQLITE_PRIVATE void sqlite3DropTable(Parse *pParse, SrcList *pName, int isView, int noErr){ + Table *pTab; Vdbe *v; - sqlite3* db = pParse->db; - int regArgs; + sqlite3 *db = pParse->db; + int iDb; - memset(&sName, 0, sizeof(NameContext)); - sName.pParse = pParse; + if( db->mallocFailed ){ + goto exit_drop_table; + } + assert( pParse->nErr==0 ); + assert( pName->nSrc==1 ); + if( noErr ) db->suppressErr++; + pTab = sqlite3LocateTableItem(pParse, isView, &pName->a[0]); + if( noErr ) db->suppressErr--; - if( - SQLITE_OK!=(rc = resolveAttachExpr(&sName, pFilename)) || - SQLITE_OK!=(rc = resolveAttachExpr(&sName, pDbname)) || - SQLITE_OK!=(rc = resolveAttachExpr(&sName, pKey)) - ){ - pParse->nErr++; - goto attach_end; + if( pTab==0 ){ + if( noErr ) sqlite3CodeVerifyNamedSchema(pParse, pName->a[0].zDatabase); + goto exit_drop_table; } + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + assert( iDb>=0 && iDbnDb ); + /* If pTab is a virtual table, call ViewGetColumnNames() to ensure + ** it is initialized. + */ + if( IsVirtual(pTab) && sqlite3ViewGetColumnNames(pParse, pTab) ){ + goto exit_drop_table; + } #ifndef SQLITE_OMIT_AUTHORIZATION - if( pAuthArg ){ - char *zAuthArg; - if( pAuthArg->op==TK_STRING ){ - zAuthArg = pAuthArg->u.zToken; + { + int code; + const char *zTab = SCHEMA_TABLE(iDb); + const char *zDb = db->aDb[iDb].zName; + const char *zArg2 = 0; + if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb)){ + goto exit_drop_table; + } + if( isView ){ + if( !OMIT_TEMPDB && iDb==1 ){ + code = SQLITE_DROP_TEMP_VIEW; + }else{ + code = SQLITE_DROP_VIEW; + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + }else if( IsVirtual(pTab) ){ + code = SQLITE_DROP_VTABLE; + zArg2 = sqlite3GetVTable(db, pTab)->pMod->zName; +#endif }else{ - zAuthArg = 0; + if( !OMIT_TEMPDB && iDb==1 ){ + code = SQLITE_DROP_TEMP_TABLE; + }else{ + code = SQLITE_DROP_TABLE; + } } - rc = sqlite3AuthCheck(pParse, type, zAuthArg, 0, 0); - if(rc!=SQLITE_OK ){ - goto attach_end; + if( sqlite3AuthCheck(pParse, code, pTab->zName, zArg2, zDb) ){ + goto exit_drop_table; + } + if( sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb) ){ + goto exit_drop_table; } } -#endif /* SQLITE_OMIT_AUTHORIZATION */ +#endif + if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 + && sqlite3StrNICmp(pTab->zName, "sqlite_stat", 11)!=0 ){ + sqlite3ErrorMsg(pParse, "table %s may not be dropped", pTab->zName); + goto exit_drop_table; + } +#ifndef SQLITE_OMIT_VIEW + /* Ensure DROP TABLE is not used on a view, and DROP VIEW is not used + ** on a table. + */ + if( isView && pTab->pSelect==0 ){ + sqlite3ErrorMsg(pParse, "use DROP TABLE to delete table %s", pTab->zName); + goto exit_drop_table; + } + if( !isView && pTab->pSelect ){ + sqlite3ErrorMsg(pParse, "use DROP VIEW to delete view %s", pTab->zName); + goto exit_drop_table; + } +#endif + /* Generate code to remove the table from the master table + ** on disk. + */ v = sqlite3GetVdbe(pParse); - regArgs = sqlite3GetTempRange(pParse, 4); - sqlite3ExprCode(pParse, pFilename, regArgs); - sqlite3ExprCode(pParse, pDbname, regArgs+1); - sqlite3ExprCode(pParse, pKey, regArgs+2); - - assert( v || db->mallocFailed ); if( v ){ - sqlite3VdbeAddOp3(v, OP_Function, 0, regArgs+3-pFunc->nArg, regArgs+3); - assert( pFunc->nArg==-1 || (pFunc->nArg&0xff)==pFunc->nArg ); - sqlite3VdbeChangeP5(v, (u8)(pFunc->nArg)); - sqlite3VdbeChangeP4(v, -1, (char *)pFunc, P4_FUNCDEF); - - /* Code an OP_Expire. For an ATTACH statement, set P1 to true (expire this - ** statement only). For DETACH, set it to false (expire all existing - ** statements). - */ - sqlite3VdbeAddOp1(v, OP_Expire, (type==SQLITE_ATTACH)); + sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3ClearStatTables(pParse, iDb, "tbl", pTab->zName); + sqlite3FkDropTable(pParse, pName, pTab); + sqlite3CodeDropTable(pParse, pTab, iDb, isView); } - -attach_end: - sqlite3ExprDelete(db, pFilename); - sqlite3ExprDelete(db, pDbname); - sqlite3ExprDelete(db, pKey); -} - -/* -** Called by the parser to compile a DETACH statement. -** -** DETACH pDbname -*/ -SQLITE_PRIVATE void sqlite3Detach(Parse *pParse, Expr *pDbname){ - static const FuncDef detach_func = { - 1, /* nArg */ - SQLITE_UTF8, /* iPrefEnc */ - 0, /* flags */ - 0, /* pUserData */ - 0, /* pNext */ - detachFunc, /* xFunc */ - 0, /* xStep */ - 0, /* xFinalize */ - "sqlite_detach", /* zName */ - 0, /* pHash */ - 0 /* pDestructor */ - }; - codeAttach(pParse, SQLITE_DETACH, &detach_func, pDbname, 0, 0, pDbname); -} -/* -** Called by the parser to compile an ATTACH statement. -** -** ATTACH p AS pDbname KEY pKey -*/ -SQLITE_PRIVATE void sqlite3Attach(Parse *pParse, Expr *p, Expr *pDbname, Expr *pKey){ - static const FuncDef attach_func = { - 3, /* nArg */ - SQLITE_UTF8, /* iPrefEnc */ - 0, /* flags */ - 0, /* pUserData */ - 0, /* pNext */ - attachFunc, /* xFunc */ - 0, /* xStep */ - 0, /* xFinalize */ - "sqlite_attach", /* zName */ - 0, /* pHash */ - 0 /* pDestructor */ - }; - codeAttach(pParse, SQLITE_ATTACH, &attach_func, p, p, pDbname, pKey); +exit_drop_table: + sqlite3SrcListDelete(db, pName); } -#endif /* SQLITE_OMIT_ATTACH */ /* -** Initialize a DbFixer structure. This routine must be called prior -** to passing the structure to one of the sqliteFixAAAA() routines below. +** This routine is called to create a new foreign key on the table +** currently under construction. pFromCol determines which columns +** in the current table point to the foreign key. If pFromCol==0 then +** connect the key to the last column inserted. pTo is the name of +** the table referred to (a.k.a the "parent" table). pToCol is a list +** of tables in the parent pTo table. flags contains all +** information about the conflict resolution algorithms specified +** in the ON DELETE, ON UPDATE and ON INSERT clauses. ** -** The return value indicates whether or not fixation is required. TRUE -** means we do need to fix the database references, FALSE means we do not. -*/ -SQLITE_PRIVATE int sqlite3FixInit( - DbFixer *pFix, /* The fixer to be initialized */ - Parse *pParse, /* Error messages will be written here */ - int iDb, /* This is the database that must be used */ - const char *zType, /* "view", "trigger", or "index" */ - const Token *pName /* Name of the view, trigger, or index */ -){ - sqlite3 *db; - - if( NEVER(iDb<0) || iDb==1 ) return 0; - db = pParse->db; - assert( db->nDb>iDb ); - pFix->pParse = pParse; - pFix->zDb = db->aDb[iDb].zName; - pFix->zType = zType; - pFix->pName = pName; - return 1; -} - -/* -** The following set of routines walk through the parse tree and assign -** a specific database to all table references where the database name -** was left unspecified in the original SQL statement. The pFix structure -** must have been initialized by a prior call to sqlite3FixInit(). +** An FKey structure is created and added to the table currently +** under construction in the pParse->pNewTable field. ** -** These routines are used to make sure that an index, trigger, or -** view in one database does not refer to objects in a different database. -** (Exception: indices, triggers, and views in the TEMP database are -** allowed to refer to anything.) If a reference is explicitly made -** to an object in a different database, an error message is added to -** pParse->zErrMsg and these routines return non-zero. If everything -** checks out, these routines return 0. +** The foreign key is set for IMMEDIATE processing. A subsequent call +** to sqlite3DeferForeignKey() might change this to DEFERRED. */ -SQLITE_PRIVATE int sqlite3FixSrcList( - DbFixer *pFix, /* Context of the fixation */ - SrcList *pList /* The Source list to check and modify */ +SQLITE_PRIVATE void sqlite3CreateForeignKey( + Parse *pParse, /* Parsing context */ + ExprList *pFromCol, /* Columns in this table that point to other table */ + Token *pTo, /* Name of the other table */ + ExprList *pToCol, /* Columns in the other table */ + int flags /* Conflict resolution algorithms. */ ){ + sqlite3 *db = pParse->db; +#ifndef SQLITE_OMIT_FOREIGN_KEY + FKey *pFKey = 0; + FKey *pNextTo; + Table *p = pParse->pNewTable; + int nByte; int i; - const char *zDb; - struct SrcList_item *pItem; + int nCol; + char *z; - if( NEVER(pList==0) ) return 0; - zDb = pFix->zDb; - for(i=0, pItem=pList->a; inSrc; i++, pItem++){ - if( pItem->zDatabase==0 ){ - pItem->zDatabase = sqlite3DbStrDup(pFix->pParse->db, zDb); - }else if( sqlite3StrICmp(pItem->zDatabase,zDb)!=0 ){ - sqlite3ErrorMsg(pFix->pParse, - "%s %T cannot reference objects in database %s", - pFix->zType, pFix->pName, pItem->zDatabase); - return 1; + assert( pTo!=0 ); + if( p==0 || IN_DECLARE_VTAB ) goto fk_end; + if( pFromCol==0 ){ + int iCol = p->nCol-1; + if( NEVER(iCol<0) ) goto fk_end; + if( pToCol && pToCol->nExpr!=1 ){ + sqlite3ErrorMsg(pParse, "foreign key on %s" + " should reference only one column of table %T", + p->aCol[iCol].zName, pTo); + goto fk_end; } -#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER) - if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1; - if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1; -#endif + nCol = 1; + }else if( pToCol && pToCol->nExpr!=pFromCol->nExpr ){ + sqlite3ErrorMsg(pParse, + "number of columns in foreign key does not match the number of " + "columns in the referenced table"); + goto fk_end; + }else{ + nCol = pFromCol->nExpr; } - return 0; -} -#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER) -SQLITE_PRIVATE int sqlite3FixSelect( - DbFixer *pFix, /* Context of the fixation */ - Select *pSelect /* The SELECT statement to be fixed to one database */ -){ - while( pSelect ){ - if( sqlite3FixExprList(pFix, pSelect->pEList) ){ - return 1; - } - if( sqlite3FixSrcList(pFix, pSelect->pSrc) ){ - return 1; - } - if( sqlite3FixExpr(pFix, pSelect->pWhere) ){ - return 1; - } - if( sqlite3FixExpr(pFix, pSelect->pHaving) ){ - return 1; + nByte = sizeof(*pFKey) + (nCol-1)*sizeof(pFKey->aCol[0]) + pTo->n + 1; + if( pToCol ){ + for(i=0; inExpr; i++){ + nByte += sqlite3Strlen30(pToCol->a[i].zName) + 1; } - pSelect = pSelect->pPrior; } - return 0; -} -SQLITE_PRIVATE int sqlite3FixExpr( - DbFixer *pFix, /* Context of the fixation */ - Expr *pExpr /* The expression to be fixed to one database */ -){ - while( pExpr ){ - if( ExprHasAnyProperty(pExpr, EP_TokenOnly) ) break; - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - if( sqlite3FixSelect(pFix, pExpr->x.pSelect) ) return 1; - }else{ - if( sqlite3FixExprList(pFix, pExpr->x.pList) ) return 1; - } - if( sqlite3FixExpr(pFix, pExpr->pRight) ){ - return 1; - } - pExpr = pExpr->pLeft; + pFKey = sqlite3DbMallocZero(db, nByte ); + if( pFKey==0 ){ + goto fk_end; } - return 0; -} -SQLITE_PRIVATE int sqlite3FixExprList( - DbFixer *pFix, /* Context of the fixation */ - ExprList *pList /* The expression to be fixed to one database */ -){ - int i; - struct ExprList_item *pItem; - if( pList==0 ) return 0; - for(i=0, pItem=pList->a; inExpr; i++, pItem++){ - if( sqlite3FixExpr(pFix, pItem->pExpr) ){ - return 1; + pFKey->pFrom = p; + pFKey->pNextFrom = p->pFKey; + z = (char*)&pFKey->aCol[nCol]; + pFKey->zTo = z; + memcpy(z, pTo->z, pTo->n); + z[pTo->n] = 0; + sqlite3Dequote(z); + z += pTo->n+1; + pFKey->nCol = nCol; + if( pFromCol==0 ){ + pFKey->aCol[0].iFrom = p->nCol-1; + }else{ + for(i=0; inCol; j++){ + if( sqlite3StrICmp(p->aCol[j].zName, pFromCol->a[i].zName)==0 ){ + pFKey->aCol[i].iFrom = j; + break; + } + } + if( j>=p->nCol ){ + sqlite3ErrorMsg(pParse, + "unknown column \"%s\" in foreign key definition", + pFromCol->a[i].zName); + goto fk_end; + } } } - return 0; -} -#endif - -#ifndef SQLITE_OMIT_TRIGGER -SQLITE_PRIVATE int sqlite3FixTriggerStep( - DbFixer *pFix, /* Context of the fixation */ - TriggerStep *pStep /* The trigger step be fixed to one database */ -){ - while( pStep ){ - if( sqlite3FixSelect(pFix, pStep->pSelect) ){ - return 1; - } - if( sqlite3FixExpr(pFix, pStep->pWhere) ){ - return 1; - } - if( sqlite3FixExprList(pFix, pStep->pExprList) ){ - return 1; + if( pToCol ){ + for(i=0; ia[i].zName); + pFKey->aCol[i].zCol = z; + memcpy(z, pToCol->a[i].zName, n); + z[n] = 0; + z += n+1; } - pStep = pStep->pNext; } - return 0; -} -#endif - -/************** End of attach.c **********************************************/ -/************** Begin file auth.c ********************************************/ -/* -** 2003 January 11 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code used to implement the sqlite3_set_authorizer() -** API. This facility is an optional feature of the library. Embedded -** systems that do not need this facility may omit it by recompiling -** the library with -DSQLITE_OMIT_AUTHORIZATION=1 -*/ - -/* -** All of the code in this file may be omitted by defining a single -** macro. -*/ -#ifndef SQLITE_OMIT_AUTHORIZATION + pFKey->isDeferred = 0; + pFKey->aAction[0] = (u8)(flags & 0xff); /* ON DELETE action */ + pFKey->aAction[1] = (u8)((flags >> 8 ) & 0xff); /* ON UPDATE action */ -/* -** Set or clear the access authorization function. -** -** The access authorization function is be called during the compilation -** phase to verify that the user has read and/or write access permission on -** various fields of the database. The first argument to the auth function -** is a copy of the 3rd argument to this routine. The second argument -** to the auth function is one of these constants: -** -** SQLITE_CREATE_INDEX -** SQLITE_CREATE_TABLE -** SQLITE_CREATE_TEMP_INDEX -** SQLITE_CREATE_TEMP_TABLE -** SQLITE_CREATE_TEMP_TRIGGER -** SQLITE_CREATE_TEMP_VIEW -** SQLITE_CREATE_TRIGGER -** SQLITE_CREATE_VIEW -** SQLITE_DELETE -** SQLITE_DROP_INDEX -** SQLITE_DROP_TABLE -** SQLITE_DROP_TEMP_INDEX -** SQLITE_DROP_TEMP_TABLE -** SQLITE_DROP_TEMP_TRIGGER -** SQLITE_DROP_TEMP_VIEW -** SQLITE_DROP_TRIGGER -** SQLITE_DROP_VIEW -** SQLITE_INSERT -** SQLITE_PRAGMA -** SQLITE_READ -** SQLITE_SELECT -** SQLITE_TRANSACTION -** SQLITE_UPDATE -** -** The third and fourth arguments to the auth function are the name of -** the table and the column that are being accessed. The auth function -** should return either SQLITE_OK, SQLITE_DENY, or SQLITE_IGNORE. If -** SQLITE_OK is returned, it means that access is allowed. SQLITE_DENY -** means that the SQL statement will never-run - the sqlite3_exec() call -** will return with an error. SQLITE_IGNORE means that the SQL statement -** should run but attempts to read the specified column will return NULL -** and attempts to write the column will be ignored. -** -** Setting the auth function to NULL disables this hook. The default -** setting of the auth function is NULL. -*/ -SQLITE_API int sqlite3_set_authorizer( - sqlite3 *db, - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), - void *pArg -){ - sqlite3_mutex_enter(db->mutex); - db->xAuth = xAuth; - db->pAuthArg = pArg; - sqlite3ExpirePreparedStatements(db); - sqlite3_mutex_leave(db->mutex); - return SQLITE_OK; -} + assert( sqlite3SchemaMutexHeld(db, 0, p->pSchema) ); + pNextTo = (FKey *)sqlite3HashInsert(&p->pSchema->fkeyHash, + pFKey->zTo, (void *)pFKey + ); + if( pNextTo==pFKey ){ + db->mallocFailed = 1; + goto fk_end; + } + if( pNextTo ){ + assert( pNextTo->pPrevTo==0 ); + pFKey->pNextTo = pNextTo; + pNextTo->pPrevTo = pFKey; + } -/* -** Write an error message into pParse->zErrMsg that explains that the -** user-supplied authorization function returned an illegal value. -*/ -static void sqliteAuthBadReturnCode(Parse *pParse){ - sqlite3ErrorMsg(pParse, "authorizer malfunction"); - pParse->rc = SQLITE_ERROR; + /* Link the foreign key to the table as the last step. + */ + p->pFKey = pFKey; + pFKey = 0; + +fk_end: + sqlite3DbFree(db, pFKey); +#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */ + sqlite3ExprListDelete(db, pFromCol); + sqlite3ExprListDelete(db, pToCol); } /* -** Invoke the authorization callback for permission to read column zCol from -** table zTab in database zDb. This function assumes that an authorization -** callback has been registered (i.e. that sqlite3.xAuth is not NULL). -** -** If SQLITE_IGNORE is returned and pExpr is not NULL, then pExpr is changed -** to an SQL NULL expression. Otherwise, if pExpr is NULL, then SQLITE_IGNORE -** is treated as SQLITE_DENY. In this case an error is left in pParse. +** This routine is called when an INITIALLY IMMEDIATE or INITIALLY DEFERRED +** clause is seen as part of a foreign key definition. The isDeferred +** parameter is 1 for INITIALLY DEFERRED and 0 for INITIALLY IMMEDIATE. +** The behavior of the most recently created foreign key is adjusted +** accordingly. */ -SQLITE_PRIVATE int sqlite3AuthReadCol( - Parse *pParse, /* The parser context */ - const char *zTab, /* Table name */ - const char *zCol, /* Column name */ - int iDb /* Index of containing database. */ -){ - sqlite3 *db = pParse->db; /* Database handle */ - char *zDb = db->aDb[iDb].zName; /* Name of attached database */ - int rc; /* Auth callback return code */ - - rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext); - if( rc==SQLITE_DENY ){ - if( db->nDb>2 || iDb!=0 ){ - sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol); - }else{ - sqlite3ErrorMsg(pParse, "access to %s.%s is prohibited", zTab, zCol); - } - pParse->rc = SQLITE_AUTH; - }else if( rc!=SQLITE_IGNORE && rc!=SQLITE_OK ){ - sqliteAuthBadReturnCode(pParse); - } - return rc; +SQLITE_PRIVATE void sqlite3DeferForeignKey(Parse *pParse, int isDeferred){ +#ifndef SQLITE_OMIT_FOREIGN_KEY + Table *pTab; + FKey *pFKey; + if( (pTab = pParse->pNewTable)==0 || (pFKey = pTab->pFKey)==0 ) return; + assert( isDeferred==0 || isDeferred==1 ); /* EV: R-30323-21917 */ + pFKey->isDeferred = (u8)isDeferred; +#endif } /* -** The pExpr should be a TK_COLUMN expression. The table referred to -** is in pTabList or else it is the NEW or OLD table of a trigger. -** Check to see if it is OK to read this particular column. +** Generate code that will erase and refill index *pIdx. This is +** used to initialize a newly created index or to recompute the +** content of an index in response to a REINDEX command. ** -** If the auth function returns SQLITE_IGNORE, change the TK_COLUMN -** instruction into a TK_NULL. If the auth function returns SQLITE_DENY, -** then generate an error. +** if memRootPage is not negative, it means that the index is newly +** created. The register specified by memRootPage contains the +** root page number of the index. If memRootPage is negative, then +** the index already exists and must be cleared before being refilled and +** the root page number of the index is taken from pIndex->tnum. */ -SQLITE_PRIVATE void sqlite3AuthRead( - Parse *pParse, /* The parser context */ - Expr *pExpr, /* The expression to check authorization on */ - Schema *pSchema, /* The schema of the expression */ - SrcList *pTabList /* All table that pExpr might refer to */ -){ - sqlite3 *db = pParse->db; - Table *pTab = 0; /* The table being read */ - const char *zCol; /* Name of the column of the table */ - int iSrc; /* Index in pTabList->a[] of table being read */ - int iDb; /* The index of the database the expression refers to */ - int iCol; /* Index of column in table */ +static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){ + Table *pTab = pIndex->pTable; /* The table that is indexed */ + int iTab = pParse->nTab++; /* Btree cursor used for pTab */ + int iIdx = pParse->nTab++; /* Btree cursor used for pIndex */ + int iSorter; /* Cursor opened by OpenSorter (if in use) */ + int addr1; /* Address of top of loop */ + int addr2; /* Address to jump to for next iteration */ + int tnum; /* Root page of index */ + int iPartIdxLabel; /* Jump to this label to skip a row */ + Vdbe *v; /* Generate code into this virtual machine */ + KeyInfo *pKey; /* KeyInfo for index */ + int regRecord; /* Register holding assembled index record */ + sqlite3 *db = pParse->db; /* The database connection */ + int iDb = sqlite3SchemaToIndex(db, pIndex->pSchema); - if( db->xAuth==0 ) return; - iDb = sqlite3SchemaToIndex(pParse->db, pSchema); - if( iDb<0 ){ - /* An attempt to read a column out of a subquery or other - ** temporary table. */ +#ifndef SQLITE_OMIT_AUTHORIZATION + if( sqlite3AuthCheck(pParse, SQLITE_REINDEX, pIndex->zName, 0, + db->aDb[iDb].zName ) ){ return; } +#endif - assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); - if( pExpr->op==TK_TRIGGER ){ - pTab = pParse->pTriggerTab; + /* Require a write-lock on the table to perform this operation */ + sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName); + + v = sqlite3GetVdbe(pParse); + if( v==0 ) return; + if( memRootPage>=0 ){ + tnum = memRootPage; }else{ - assert( pTabList ); - for(iSrc=0; ALWAYS(iSrcnSrc); iSrc++){ - if( pExpr->iTable==pTabList->a[iSrc].iCursor ){ - pTab = pTabList->a[iSrc].pTab; - break; - } - } + tnum = pIndex->tnum; } - iCol = pExpr->iColumn; - if( NEVER(pTab==0) ) return; + pKey = sqlite3KeyInfoOfIndex(pParse, pIndex); - if( iCol>=0 ){ - assert( iColnCol ); - zCol = pTab->aCol[iCol].zName; - }else if( pTab->iPKey>=0 ){ - assert( pTab->iPKeynCol ); - zCol = pTab->aCol[pTab->iPKey].zName; + /* Open the sorter cursor if we are to use one. */ + iSorter = pParse->nTab++; + sqlite3VdbeAddOp4(v, OP_SorterOpen, iSorter, 0, pIndex->nKeyCol, (char*) + sqlite3KeyInfoRef(pKey), P4_KEYINFO); + + /* Open the table. Loop through all rows of the table, inserting index + ** records into the sorter. */ + sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); + addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0); VdbeCoverage(v); + regRecord = sqlite3GetTempReg(pParse); + + sqlite3GenerateIndexKey(pParse,pIndex,iTab,regRecord,0,&iPartIdxLabel,0,0); + sqlite3VdbeAddOp2(v, OP_SorterInsert, iSorter, regRecord); + sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel); + sqlite3VdbeAddOp2(v, OP_Next, iTab, addr1+1); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr1); + if( memRootPage<0 ) sqlite3VdbeAddOp2(v, OP_Clear, tnum, iDb); + sqlite3VdbeAddOp4(v, OP_OpenWrite, iIdx, tnum, iDb, + (char *)pKey, P4_KEYINFO); + sqlite3VdbeChangeP5(v, OPFLAG_BULKCSR|((memRootPage>=0)?OPFLAG_P2ISREG:0)); + + addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v); + assert( pKey!=0 || db->mallocFailed || pParse->nErr ); + if( IsUniqueIndex(pIndex) && pKey!=0 ){ + int j2 = sqlite3VdbeCurrentAddr(v) + 3; + sqlite3VdbeAddOp2(v, OP_Goto, 0, j2); + addr2 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp4Int(v, OP_SorterCompare, iSorter, j2, regRecord, + pIndex->nKeyCol); VdbeCoverage(v); + sqlite3UniqueConstraint(pParse, OE_Abort, pIndex); }else{ - zCol = "ROWID"; + addr2 = sqlite3VdbeCurrentAddr(v); } - assert( iDb>=0 && iDbnDb ); - if( SQLITE_IGNORE==sqlite3AuthReadCol(pParse, pTab->zName, zCol, iDb) ){ - pExpr->op = TK_NULL; + sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx); + sqlite3VdbeAddOp3(v, OP_IdxInsert, iIdx, regRecord, 1); + sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + sqlite3ReleaseTempReg(pParse, regRecord); + sqlite3VdbeAddOp2(v, OP_SorterNext, iSorter, addr2); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr1); + + sqlite3VdbeAddOp1(v, OP_Close, iTab); + sqlite3VdbeAddOp1(v, OP_Close, iIdx); + sqlite3VdbeAddOp1(v, OP_Close, iSorter); +} + +/* +** Allocate heap space to hold an Index object with nCol columns. +** +** Increase the allocation size to provide an extra nExtra bytes +** of 8-byte aligned space after the Index object and return a +** pointer to this extra space in *ppExtra. +*/ +SQLITE_PRIVATE Index *sqlite3AllocateIndexObject( + sqlite3 *db, /* Database connection */ + i16 nCol, /* Total number of columns in the index */ + int nExtra, /* Number of bytes of extra space to alloc */ + char **ppExtra /* Pointer to the "extra" space */ +){ + Index *p; /* Allocated index object */ + int nByte; /* Bytes of space for Index object + arrays */ + + nByte = ROUND8(sizeof(Index)) + /* Index structure */ + ROUND8(sizeof(char*)*nCol) + /* Index.azColl */ + ROUND8(sizeof(LogEst)*(nCol+1) + /* Index.aiRowLogEst */ + sizeof(i16)*nCol + /* Index.aiColumn */ + sizeof(u8)*nCol); /* Index.aSortOrder */ + p = sqlite3DbMallocZero(db, nByte + nExtra); + if( p ){ + char *pExtra = ((char*)p)+ROUND8(sizeof(Index)); + p->azColl = (char**)pExtra; pExtra += ROUND8(sizeof(char*)*nCol); + p->aiRowLogEst = (LogEst*)pExtra; pExtra += sizeof(LogEst)*(nCol+1); + p->aiColumn = (i16*)pExtra; pExtra += sizeof(i16)*nCol; + p->aSortOrder = (u8*)pExtra; + p->nColumn = nCol; + p->nKeyCol = nCol - 1; + *ppExtra = ((char*)p) + nByte; } + return p; } /* -** Do an authorization check using the code and arguments given. Return -** either SQLITE_OK (zero) or SQLITE_IGNORE or SQLITE_DENY. If SQLITE_DENY -** is returned, then the error count and error message in pParse are -** modified appropriately. +** Create a new index for an SQL table. pName1.pName2 is the name of the index +** and pTblList is the name of the table that is to be indexed. Both will +** be NULL for a primary key or an index that is created to satisfy a +** UNIQUE constraint. If pTable and pIndex are NULL, use pParse->pNewTable +** as the table to be indexed. pParse->pNewTable is a table that is +** currently being constructed by a CREATE TABLE statement. +** +** pList is a list of columns to be indexed. pList will be NULL if this +** is a primary key or unique-constraint on the most recent column added +** to the table currently under construction. +** +** If the index is created successfully, return a pointer to the new Index +** structure. This is used by sqlite3AddPrimaryKey() to mark the index +** as the tables primary key (Index.idxType==SQLITE_IDXTYPE_PRIMARYKEY) */ -SQLITE_PRIVATE int sqlite3AuthCheck( - Parse *pParse, - int code, - const char *zArg1, - const char *zArg2, - const char *zArg3 +SQLITE_PRIVATE Index *sqlite3CreateIndex( + Parse *pParse, /* All information about this parse */ + Token *pName1, /* First part of index name. May be NULL */ + Token *pName2, /* Second part of index name. May be NULL */ + SrcList *pTblName, /* Table to index. Use pParse->pNewTable if 0 */ + ExprList *pList, /* A list of columns to be indexed */ + int onError, /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ + Token *pStart, /* The CREATE token that begins this statement */ + Expr *pPIWhere, /* WHERE clause for partial indices */ + int sortOrder, /* Sort order of primary key when pList==NULL */ + int ifNotExist /* Omit error if index already exists */ ){ + Index *pRet = 0; /* Pointer to return */ + Table *pTab = 0; /* Table to be indexed */ + Index *pIndex = 0; /* The index to be created */ + char *zName = 0; /* Name of the index */ + int nName; /* Number of characters in zName */ + int i, j; + DbFixer sFix; /* For assigning database names to pTable */ + int sortOrderMask; /* 1 to honor DESC in index. 0 to ignore. */ sqlite3 *db = pParse->db; - int rc; + Db *pDb; /* The specific table containing the indexed database */ + int iDb; /* Index of the database that is being written */ + Token *pName = 0; /* Unqualified name of the index to create */ + struct ExprList_item *pListItem; /* For looping over pList */ + const Column *pTabCol; /* A column in the table */ + int nExtra = 0; /* Space allocated for zExtra[] */ + int nExtraCol; /* Number of extra columns needed */ + char *zExtra = 0; /* Extra space after the Index object */ + Index *pPk = 0; /* PRIMARY KEY index for WITHOUT ROWID tables */ - /* Don't do any authorization checks if the database is initialising - ** or if the parser is being invoked from within sqlite3_declare_vtab. + assert( pParse->nErr==0 ); /* Never called with prior errors */ + if( db->mallocFailed || IN_DECLARE_VTAB ){ + goto exit_create_index; + } + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + goto exit_create_index; + } + + /* + ** Find the table that is to be indexed. Return early if not found. */ - if( db->init.busy || IN_DECLARE_VTAB ){ - return SQLITE_OK; + if( pTblName!=0 ){ + + /* Use the two-part index name to determine the database + ** to search for the table. 'Fix' the table name to this db + ** before looking up the table. + */ + assert( pName1 && pName2 ); + iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); + if( iDb<0 ) goto exit_create_index; + assert( pName && pName->z ); + +#ifndef SQLITE_OMIT_TEMPDB + /* If the index name was unqualified, check if the table + ** is a temp table. If so, set the database to 1. Do not do this + ** if initialising a database schema. + */ + if( !db->init.busy ){ + pTab = sqlite3SrcListLookup(pParse, pTblName); + if( pName2->n==0 && pTab && pTab->pSchema==db->aDb[1].pSchema ){ + iDb = 1; + } + } +#endif + + sqlite3FixInit(&sFix, pParse, iDb, "index", pName); + if( sqlite3FixSrcList(&sFix, pTblName) ){ + /* Because the parser constructs pTblName from a single identifier, + ** sqlite3FixSrcList can never fail. */ + assert(0); + } + pTab = sqlite3LocateTableItem(pParse, 0, &pTblName->a[0]); + assert( db->mallocFailed==0 || pTab==0 ); + if( pTab==0 ) goto exit_create_index; + if( iDb==1 && db->aDb[iDb].pSchema!=pTab->pSchema ){ + sqlite3ErrorMsg(pParse, + "cannot create a TEMP index on non-TEMP table \"%s\"", + pTab->zName); + goto exit_create_index; + } + if( !HasRowid(pTab) ) pPk = sqlite3PrimaryKeyIndex(pTab); + }else{ + assert( pName==0 ); + assert( pStart==0 ); + pTab = pParse->pNewTable; + if( !pTab ) goto exit_create_index; + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); } + pDb = &db->aDb[iDb]; - if( db->xAuth==0 ){ - return SQLITE_OK; + assert( pTab!=0 ); + assert( pParse->nErr==0 ); + if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 + && db->init.busy==0 +#if SQLITE_USER_AUTHENTICATION + && sqlite3UserAuthTable(pTab->zName)==0 +#endif + && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 ){ + sqlite3ErrorMsg(pParse, "table %s may not be indexed", pTab->zName); + goto exit_create_index; } - rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext); - if( rc==SQLITE_DENY ){ - sqlite3ErrorMsg(pParse, "not authorized"); - pParse->rc = SQLITE_AUTH; - }else if( rc!=SQLITE_OK && rc!=SQLITE_IGNORE ){ - rc = SQLITE_DENY; - sqliteAuthBadReturnCode(pParse); +#ifndef SQLITE_OMIT_VIEW + if( pTab->pSelect ){ + sqlite3ErrorMsg(pParse, "views may not be indexed"); + goto exit_create_index; } - return rc; -} +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + sqlite3ErrorMsg(pParse, "virtual tables may not be indexed"); + goto exit_create_index; + } +#endif -/* -** Push an authorization context. After this routine is called, the -** zArg3 argument to authorization callbacks will be zContext until -** popped. Or if pParse==0, this routine is a no-op. -*/ -SQLITE_PRIVATE void sqlite3AuthContextPush( - Parse *pParse, - AuthContext *pContext, - const char *zContext -){ - assert( pParse ); - pContext->pParse = pParse; - pContext->zAuthContext = pParse->zAuthContext; - pParse->zAuthContext = zContext; -} + /* + ** Find the name of the index. Make sure there is not already another + ** index or table with the same name. + ** + ** Exception: If we are reading the names of permanent indices from the + ** sqlite_master table (because some other process changed the schema) and + ** one of the index names collides with the name of a temporary table or + ** index, then we will continue to process this index. + ** + ** If pName==0 it means that we are + ** dealing with a primary key or UNIQUE constraint. We have to invent our + ** own name. + */ + if( pName ){ + zName = sqlite3NameFromToken(db, pName); + if( zName==0 ) goto exit_create_index; + assert( pName->z!=0 ); + if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ + goto exit_create_index; + } + if( !db->init.busy ){ + if( sqlite3FindTable(db, zName, 0)!=0 ){ + sqlite3ErrorMsg(pParse, "there is already a table named %s", zName); + goto exit_create_index; + } + } + if( sqlite3FindIndex(db, zName, pDb->zName)!=0 ){ + if( !ifNotExist ){ + sqlite3ErrorMsg(pParse, "index %s already exists", zName); + }else{ + assert( !db->init.busy ); + sqlite3CodeVerifySchema(pParse, iDb); + } + goto exit_create_index; + } + }else{ + int n; + Index *pLoop; + for(pLoop=pTab->pIndex, n=1; pLoop; pLoop=pLoop->pNext, n++){} + zName = sqlite3MPrintf(db, "sqlite_autoindex_%s_%d", pTab->zName, n); + if( zName==0 ){ + goto exit_create_index; + } + } -/* -** Pop an authorization context that was previously pushed -** by sqlite3AuthContextPush -*/ -SQLITE_PRIVATE void sqlite3AuthContextPop(AuthContext *pContext){ - if( pContext->pParse ){ - pContext->pParse->zAuthContext = pContext->zAuthContext; - pContext->pParse = 0; + /* Check for authorization to create an index. + */ +#ifndef SQLITE_OMIT_AUTHORIZATION + { + const char *zDb = pDb->zName; + if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iDb), 0, zDb) ){ + goto exit_create_index; + } + i = SQLITE_CREATE_INDEX; + if( !OMIT_TEMPDB && iDb==1 ) i = SQLITE_CREATE_TEMP_INDEX; + if( sqlite3AuthCheck(pParse, i, zName, pTab->zName, zDb) ){ + goto exit_create_index; + } } -} +#endif -#endif /* SQLITE_OMIT_AUTHORIZATION */ + /* If pList==0, it means this routine was called to make a primary + ** key out of the last column added to the table under construction. + ** So create a fake list to simulate this. + */ + if( pList==0 ){ + pList = sqlite3ExprListAppend(pParse, 0, 0); + if( pList==0 ) goto exit_create_index; + pList->a[0].zName = sqlite3DbStrDup(pParse->db, + pTab->aCol[pTab->nCol-1].zName); + pList->a[0].sortOrder = (u8)sortOrder; + } -/************** End of auth.c ************************************************/ -/************** Begin file build.c *******************************************/ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains C code routines that are called by the SQLite parser -** when syntax rules are reduced. The routines in this file handle the -** following kinds of SQL syntax: -** -** CREATE TABLE -** DROP TABLE -** CREATE INDEX -** DROP INDEX -** creating ID lists -** BEGIN TRANSACTION -** COMMIT -** ROLLBACK -*/ + /* Figure out how many bytes of space are required to store explicitly + ** specified collation sequence names. + */ + for(i=0; inExpr; i++){ + Expr *pExpr = pList->a[i].pExpr; + if( pExpr ){ + assert( pExpr->op==TK_COLLATE ); + nExtra += (1 + sqlite3Strlen30(pExpr->u.zToken)); + } + } -/* -** This routine is called when a new SQL statement is beginning to -** be parsed. Initialize the pParse structure as needed. -*/ -SQLITE_PRIVATE void sqlite3BeginParse(Parse *pParse, int explainFlag){ - pParse->explain = (u8)explainFlag; - pParse->nVar = 0; -} + /* + ** Allocate the index structure. + */ + nName = sqlite3Strlen30(zName); + nExtraCol = pPk ? pPk->nKeyCol : 1; + pIndex = sqlite3AllocateIndexObject(db, pList->nExpr + nExtraCol, + nName + nExtra + 1, &zExtra); + if( db->mallocFailed ){ + goto exit_create_index; + } + assert( EIGHT_BYTE_ALIGNMENT(pIndex->aiRowLogEst) ); + assert( EIGHT_BYTE_ALIGNMENT(pIndex->azColl) ); + pIndex->zName = zExtra; + zExtra += nName + 1; + memcpy(pIndex->zName, zName, nName+1); + pIndex->pTable = pTab; + pIndex->onError = (u8)onError; + pIndex->uniqNotNull = onError!=OE_None; + pIndex->idxType = pName ? SQLITE_IDXTYPE_APPDEF : SQLITE_IDXTYPE_UNIQUE; + pIndex->pSchema = db->aDb[iDb].pSchema; + pIndex->nKeyCol = pList->nExpr; + if( pPIWhere ){ + sqlite3ResolveSelfReference(pParse, pTab, NC_PartIdx, pPIWhere, 0); + pIndex->pPartIdxWhere = pPIWhere; + pPIWhere = 0; + } + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); -#ifndef SQLITE_OMIT_SHARED_CACHE -/* -** The TableLock structure is only used by the sqlite3TableLock() and -** codeTableLocks() functions. -*/ -struct TableLock { - int iDb; /* The database containing the table to be locked */ - int iTab; /* The root page of the table to be locked */ - u8 isWriteLock; /* True for write lock. False for a read lock */ - const char *zName; /* Name of the table */ -}; + /* Check to see if we should honor DESC requests on index columns + */ + if( pDb->pSchema->file_format>=4 ){ + sortOrderMask = -1; /* Honor DESC */ + }else{ + sortOrderMask = 0; /* Ignore DESC */ + } -/* -** Record the fact that we want to lock a table at run-time. -** -** The table to be locked has root page iTab and is found in database iDb. -** A read or a write lock can be taken depending on isWritelock. -** -** This routine just records the fact that the lock is desired. The -** code to make the lock occur is generated by a later call to -** codeTableLocks() which occurs during sqlite3FinishCoding(). -*/ -SQLITE_PRIVATE void sqlite3TableLock( - Parse *pParse, /* Parsing context */ - int iDb, /* Index of the database containing the table to lock */ - int iTab, /* Root page number of the table to be locked */ - u8 isWriteLock, /* True for a write lock */ - const char *zName /* Name of the table to be locked */ -){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - int i; - int nBytes; - TableLock *p; - assert( iDb>=0 ); + /* Scan the names of the columns of the table to be indexed and + ** load the column indices into the Index structure. Report an error + ** if any column is not found. + ** + ** TODO: Add a test to make sure that the same column is not named + ** more than once within the same index. Only the first instance of + ** the column will ever be used by the optimizer. Note that using the + ** same column more than once cannot be an error because that would + ** break backwards compatibility - it needs to be a warning. + */ + for(i=0, pListItem=pList->a; inExpr; i++, pListItem++){ + const char *zColName = pListItem->zName; + int requestedSortOrder; + char *zColl; /* Collation sequence name */ - for(i=0; inTableLock; i++){ - p = &pToplevel->aTableLock[i]; - if( p->iDb==iDb && p->iTab==iTab ){ - p->isWriteLock = (p->isWriteLock || isWriteLock); - return; + for(j=0, pTabCol=pTab->aCol; jnCol; j++, pTabCol++){ + if( sqlite3StrICmp(zColName, pTabCol->zName)==0 ) break; + } + if( j>=pTab->nCol ){ + sqlite3ErrorMsg(pParse, "table %s has no column named %s", + pTab->zName, zColName); + pParse->checkSchema = 1; + goto exit_create_index; + } + assert( j<=0x7fff ); + pIndex->aiColumn[i] = (i16)j; + if( pListItem->pExpr ){ + int nColl; + assert( pListItem->pExpr->op==TK_COLLATE ); + zColl = pListItem->pExpr->u.zToken; + nColl = sqlite3Strlen30(zColl) + 1; + assert( nExtra>=nColl ); + memcpy(zExtra, zColl, nColl); + zColl = zExtra; + zExtra += nColl; + nExtra -= nColl; + }else{ + zColl = pTab->aCol[j].zColl; + if( !zColl ) zColl = "BINARY"; + } + if( !db->init.busy && !sqlite3LocateCollSeq(pParse, zColl) ){ + goto exit_create_index; } + pIndex->azColl[i] = zColl; + requestedSortOrder = pListItem->sortOrder & sortOrderMask; + pIndex->aSortOrder[i] = (u8)requestedSortOrder; + if( pTab->aCol[j].notNull==0 ) pIndex->uniqNotNull = 0; } - - nBytes = sizeof(TableLock) * (pToplevel->nTableLock+1); - pToplevel->aTableLock = - sqlite3DbReallocOrFree(pToplevel->db, pToplevel->aTableLock, nBytes); - if( pToplevel->aTableLock ){ - p = &pToplevel->aTableLock[pToplevel->nTableLock++]; - p->iDb = iDb; - p->iTab = iTab; - p->isWriteLock = isWriteLock; - p->zName = zName; + if( pPk ){ + for(j=0; jnKeyCol; j++){ + int x = pPk->aiColumn[j]; + if( hasColumn(pIndex->aiColumn, pIndex->nKeyCol, x) ){ + pIndex->nColumn--; + }else{ + pIndex->aiColumn[i] = x; + pIndex->azColl[i] = pPk->azColl[j]; + pIndex->aSortOrder[i] = pPk->aSortOrder[j]; + i++; + } + } + assert( i==pIndex->nColumn ); }else{ - pToplevel->nTableLock = 0; - pToplevel->db->mallocFailed = 1; + pIndex->aiColumn[i] = -1; + pIndex->azColl[i] = "BINARY"; } -} + sqlite3DefaultRowEst(pIndex); + if( pParse->pNewTable==0 ) estimateIndexWidth(pIndex); -/* -** Code an OP_TableLock instruction for each table locked by the -** statement (configured by calls to sqlite3TableLock()). -*/ -static void codeTableLocks(Parse *pParse){ - int i; - Vdbe *pVdbe; + if( pTab==pParse->pNewTable ){ + /* This routine has been called to create an automatic index as a + ** result of a PRIMARY KEY or UNIQUE clause on a column definition, or + ** a PRIMARY KEY or UNIQUE clause following the column definitions. + ** i.e. one of: + ** + ** CREATE TABLE t(x PRIMARY KEY, y); + ** CREATE TABLE t(x, y, UNIQUE(x, y)); + ** + ** Either way, check to see if the table already has such an index. If + ** so, don't bother creating this one. This only applies to + ** automatically created indices. Users can do as they wish with + ** explicit indices. + ** + ** Two UNIQUE or PRIMARY KEY constraints are considered equivalent + ** (and thus suppressing the second one) even if they have different + ** sort orders. + ** + ** If there are different collating sequences or if the columns of + ** the constraint occur in different orders, then the constraints are + ** considered distinct and both result in separate indices. + */ + Index *pIdx; + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int k; + assert( IsUniqueIndex(pIdx) ); + assert( pIdx->idxType!=SQLITE_IDXTYPE_APPDEF ); + assert( IsUniqueIndex(pIndex) ); - pVdbe = sqlite3GetVdbe(pParse); - assert( pVdbe!=0 ); /* sqlite3GetVdbe cannot fail: VDBE already allocated */ + if( pIdx->nKeyCol!=pIndex->nKeyCol ) continue; + for(k=0; knKeyCol; k++){ + const char *z1; + const char *z2; + if( pIdx->aiColumn[k]!=pIndex->aiColumn[k] ) break; + z1 = pIdx->azColl[k]; + z2 = pIndex->azColl[k]; + if( z1!=z2 && sqlite3StrICmp(z1, z2) ) break; + } + if( k==pIdx->nKeyCol ){ + if( pIdx->onError!=pIndex->onError ){ + /* This constraint creates the same index as a previous + ** constraint specified somewhere in the CREATE TABLE statement. + ** However the ON CONFLICT clauses are different. If both this + ** constraint and the previous equivalent constraint have explicit + ** ON CONFLICT clauses this is an error. Otherwise, use the + ** explicitly specified behavior for the index. + */ + if( !(pIdx->onError==OE_Default || pIndex->onError==OE_Default) ){ + sqlite3ErrorMsg(pParse, + "conflicting ON CONFLICT clauses specified", 0); + } + if( pIdx->onError==OE_Default ){ + pIdx->onError = pIndex->onError; + } + } + goto exit_create_index; + } + } + } - for(i=0; inTableLock; i++){ - TableLock *p = &pParse->aTableLock[i]; - int p1 = p->iDb; - sqlite3VdbeAddOp4(pVdbe, OP_TableLock, p1, p->iTab, p->isWriteLock, - p->zName, P4_STATIC); + /* Link the new Index structure to its table and to the other + ** in-memory database structures. + */ + if( db->init.busy ){ + Index *p; + assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); + p = sqlite3HashInsert(&pIndex->pSchema->idxHash, + pIndex->zName, pIndex); + if( p ){ + assert( p==pIndex ); /* Malloc must have failed */ + db->mallocFailed = 1; + goto exit_create_index; + } + db->flags |= SQLITE_InternChanges; + if( pTblName!=0 ){ + pIndex->tnum = db->init.newTnum; + } } -} -#else - #define codeTableLocks(x) -#endif -/* -** This routine is called after a single SQL statement has been -** parsed and a VDBE program to execute that statement has been -** prepared. This routine puts the finishing touches on the -** VDBE program and resets the pParse structure for the next -** parse. -** -** Note that if an error occurred, it might be the case that -** no VDBE code was generated. -*/ -SQLITE_PRIVATE void sqlite3FinishCoding(Parse *pParse){ - sqlite3 *db; - Vdbe *v; + /* If this is the initial CREATE INDEX statement (or CREATE TABLE if the + ** index is an implied index for a UNIQUE or PRIMARY KEY constraint) then + ** emit code to allocate the index rootpage on disk and make an entry for + ** the index in the sqlite_master table and populate the index with + ** content. But, do not do this if we are simply reading the sqlite_master + ** table to parse the schema, or if this index is the PRIMARY KEY index + ** of a WITHOUT ROWID table. + ** + ** If pTblName==0 it means this index is generated as an implied PRIMARY KEY + ** or UNIQUE index in a CREATE TABLE statement. Since the table + ** has just been created, it contains no data and the index initialization + ** step can be skipped. + */ + else if( pParse->nErr==0 && (HasRowid(pTab) || pTblName!=0) ){ + Vdbe *v; + char *zStmt; + int iMem = ++pParse->nMem; - db = pParse->db; - if( db->mallocFailed ) return; - if( pParse->nested ) return; - if( pParse->nErr ) return; + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto exit_create_index; - /* Begin by generating some termination code at the end of the - ** vdbe program - */ - v = sqlite3GetVdbe(pParse); - assert( !pParse->isMultiWrite - || sqlite3VdbeAssertMayAbort(v, pParse->mayAbort)); - if( v ){ - sqlite3VdbeAddOp0(v, OP_Halt); - /* The cookie mask contains one bit for each database file open. - ** (Bit 0 is for main, bit 1 is for temp, and so forth.) Bits are - ** set for each database that is used. Generate code to start a - ** transaction on each used database and to verify the schema cookie - ** on each used database. + /* Create the rootpage for the index */ - if( pParse->cookieGoto>0 ){ - yDbMask mask; - int iDb; - sqlite3VdbeJumpHere(v, pParse->cookieGoto-1); - for(iDb=0, mask=1; iDbnDb; mask<<=1, iDb++){ - if( (mask & pParse->cookieMask)==0 ) continue; - sqlite3VdbeUsesBtree(v, iDb); - sqlite3VdbeAddOp2(v,OP_Transaction, iDb, (mask & pParse->writeMask)!=0); - if( db->init.busy==0 ){ - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - sqlite3VdbeAddOp3(v, OP_VerifyCookie, - iDb, pParse->cookieValue[iDb], - db->aDb[iDb].pSchema->iGeneration); - } - } -#ifndef SQLITE_OMIT_VIRTUALTABLE - { - int i; - for(i=0; inVtabLock; i++){ - char *vtab = (char *)sqlite3GetVTable(db, pParse->apVtabLock[i]); - sqlite3VdbeAddOp4(v, OP_VBegin, 0, 0, 0, vtab, P4_VTAB); - } - pParse->nVtabLock = 0; - } -#endif + sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3VdbeAddOp2(v, OP_CreateIndex, iDb, iMem); - /* Once all the cookies have been verified and transactions opened, - ** obtain the required table-locks. This is a no-op unless the - ** shared-cache feature is enabled. - */ - codeTableLocks(pParse); + /* Gather the complete text of the CREATE INDEX statement into + ** the zStmt variable + */ + if( pStart ){ + int n = (int)(pParse->sLastToken.z - pName->z) + pParse->sLastToken.n; + if( pName->z[n-1]==';' ) n--; + /* A named index with an explicit CREATE INDEX statement */ + zStmt = sqlite3MPrintf(db, "CREATE%s INDEX %.*s", + onError==OE_None ? "" : " UNIQUE", n, pName->z); + }else{ + /* An automatic index created by a PRIMARY KEY or UNIQUE constraint */ + /* zStmt = sqlite3MPrintf(""); */ + zStmt = 0; + } - /* Initialize any AUTOINCREMENT data structures required. - */ - sqlite3AutoincrementBegin(pParse); + /* Add an entry in sqlite_master for this index + */ + sqlite3NestedParse(pParse, + "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);", + db->aDb[iDb].zName, SCHEMA_TABLE(iDb), + pIndex->zName, + pTab->zName, + iMem, + zStmt + ); + sqlite3DbFree(db, zStmt); - /* Finally, jump back to the beginning of the executable code. */ - sqlite3VdbeAddOp2(v, OP_Goto, 0, pParse->cookieGoto); + /* Fill the index with data and reparse the schema. Code an OP_Expire + ** to invalidate all pre-compiled statements. + */ + if( pTblName ){ + sqlite3RefillIndex(pParse, pIndex, iMem); + sqlite3ChangeCookie(pParse, iDb); + sqlite3VdbeAddParseSchemaOp(v, iDb, + sqlite3MPrintf(db, "name='%q' AND type='index'", pIndex->zName)); + sqlite3VdbeAddOp1(v, OP_Expire, 0); } } - - /* Get the VDBE program ready for execution + /* When adding an index to the list of indices for a table, make + ** sure all indices labeled OE_Replace come after all those labeled + ** OE_Ignore. This is necessary for the correct constraint check + ** processing (in sqlite3GenerateConstraintChecks()) as part of + ** UPDATE and INSERT statements. */ - if( v && ALWAYS(pParse->nErr==0) && !db->mallocFailed ){ -#ifdef SQLITE_DEBUG - FILE *trace = (db->flags & SQLITE_VdbeTrace)!=0 ? stdout : 0; - sqlite3VdbeTrace(v, trace); -#endif - assert( pParse->iCacheLevel==0 ); /* Disables and re-enables match */ - /* A minimum of one cursor is required if autoincrement is used - * See ticket [a696379c1f08866] */ - if( pParse->pAinc!=0 && pParse->nTab==0 ) pParse->nTab = 1; - sqlite3VdbeMakeReady(v, pParse); - pParse->rc = SQLITE_DONE; - pParse->colNamesSet = 0; - }else{ - pParse->rc = SQLITE_ERROR; + if( db->init.busy || pTblName==0 ){ + if( onError!=OE_Replace || pTab->pIndex==0 + || pTab->pIndex->onError==OE_Replace){ + pIndex->pNext = pTab->pIndex; + pTab->pIndex = pIndex; + }else{ + Index *pOther = pTab->pIndex; + while( pOther->pNext && pOther->pNext->onError!=OE_Replace ){ + pOther = pOther->pNext; + } + pIndex->pNext = pOther->pNext; + pOther->pNext = pIndex; + } + pRet = pIndex; + pIndex = 0; } - pParse->nTab = 0; - pParse->nMem = 0; - pParse->nSet = 0; - pParse->nVar = 0; - pParse->cookieMask = 0; - pParse->cookieGoto = 0; -} - -/* -** Run the parser and code generator recursively in order to generate -** code for the SQL statement given onto the end of the pParse context -** currently under construction. When the parser is run recursively -** this way, the final OP_Halt is not appended and other initialization -** and finalization steps are omitted because those are handling by the -** outermost parser. -** -** Not everything is nestable. This facility is designed to permit -** INSERT, UPDATE, and DELETE operations against SQLITE_MASTER. Use -** care if you decide to try to use this routine for some other purposes. -*/ -SQLITE_PRIVATE void sqlite3NestedParse(Parse *pParse, const char *zFormat, ...){ - va_list ap; - char *zSql; - char *zErrMsg = 0; - sqlite3 *db = pParse->db; -# define SAVE_SZ (sizeof(Parse) - offsetof(Parse,nVar)) - char saveBuf[SAVE_SZ]; - if( pParse->nErr ) return; - assert( pParse->nested<10 ); /* Nesting should only be of limited depth */ - va_start(ap, zFormat); - zSql = sqlite3VMPrintf(db, zFormat, ap); - va_end(ap); - if( zSql==0 ){ - return; /* A malloc must have failed */ - } - pParse->nested++; - memcpy(saveBuf, &pParse->nVar, SAVE_SZ); - memset(&pParse->nVar, 0, SAVE_SZ); - sqlite3RunParser(pParse, zSql, &zErrMsg); - sqlite3DbFree(db, zErrMsg); - sqlite3DbFree(db, zSql); - memcpy(&pParse->nVar, saveBuf, SAVE_SZ); - pParse->nested--; + /* Clean up before exiting */ +exit_create_index: + if( pIndex ) freeIndex(db, pIndex); + sqlite3ExprDelete(db, pPIWhere); + sqlite3ExprListDelete(db, pList); + sqlite3SrcListDelete(db, pTblName); + sqlite3DbFree(db, zName); + return pRet; } /* -** Locate the in-memory structure that describes a particular database -** table given the name of that table and (optionally) the name of the -** database containing the table. Return NULL if not found. +** Fill the Index.aiRowEst[] array with default information - information +** to be used when we have not run the ANALYZE command. ** -** If zDatabase is 0, all databases are searched for the table and the -** first matching table is returned. (No checking for duplicate table -** names is done.) The search order is TEMP first, then MAIN, then any -** auxiliary databases added using the ATTACH command. +** aiRowEst[0] is supposed to contain the number of elements in the index. +** Since we do not know, guess 1 million. aiRowEst[1] is an estimate of the +** number of rows in the table that match any particular value of the +** first column of the index. aiRowEst[2] is an estimate of the number +** of rows that match any particular combination of the first 2 columns +** of the index. And so forth. It must always be the case that +* +** aiRowEst[N]<=aiRowEst[N-1] +** aiRowEst[N]>=1 ** -** See also sqlite3LocateTable(). +** Apart from that, we have little to go on besides intuition as to +** how aiRowEst[] should be initialized. The numbers generated here +** are based on typical values found in actual indices. */ -SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3 *db, const char *zName, const char *zDatabase){ - Table *p = 0; +SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){ + /* 10, 9, 8, 7, 6 */ + LogEst aVal[] = { 33, 32, 30, 28, 26 }; + LogEst *a = pIdx->aiRowLogEst; + int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol); int i; - int nName; - assert( zName!=0 ); - nName = sqlite3Strlen30(zName); - /* All mutexes are required for schema access. Make sure we hold them. */ - assert( zDatabase!=0 || sqlite3BtreeHoldsAllMutexes(db) ); - for(i=OMIT_TEMPDB; inDb; i++){ - int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ - if( zDatabase!=0 && sqlite3StrICmp(zDatabase, db->aDb[j].zName) ) continue; - assert( sqlite3SchemaMutexHeld(db, j, 0) ); - p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName, nName); - if( p ) break; - } - return p; -} - -/* -** Locate the in-memory structure that describes a particular database -** table given the name of that table and (optionally) the name of the -** database containing the table. Return NULL if not found. Also leave an -** error message in pParse->zErrMsg. -** -** The difference between this routine and sqlite3FindTable() is that this -** routine leaves an error message in pParse->zErrMsg where -** sqlite3FindTable() does not. -*/ -SQLITE_PRIVATE Table *sqlite3LocateTable( - Parse *pParse, /* context in which to report errors */ - int isView, /* True if looking for a VIEW rather than a TABLE */ - const char *zName, /* Name of the table we are looking for */ - const char *zDbase /* Name of the database. Might be NULL */ -){ - Table *p; - - /* Read the database schema. If an error occurs, leave an error message - ** and code in pParse and return NULL. */ - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ - return 0; - } - p = sqlite3FindTable(pParse->db, zName, zDbase); - if( p==0 ){ - const char *zMsg = isView ? "no such view" : "no such table"; - if( zDbase ){ - sqlite3ErrorMsg(pParse, "%s: %s.%s", zMsg, zDbase, zName); - }else{ - sqlite3ErrorMsg(pParse, "%s: %s", zMsg, zName); - } - pParse->checkSchema = 1; - } - return p; -} + /* Set the first entry (number of rows in the index) to the estimated + ** number of rows in the table. Or 10, if the estimated number of rows + ** in the table is less than that. */ + a[0] = pIdx->pTable->nRowLogEst; + if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) ); -/* -** Locate the in-memory structure that describes -** a particular index given the name of that index -** and the name of the database that contains the index. -** Return NULL if not found. -** -** If zDatabase is 0, all databases are searched for the -** table and the first matching index is returned. (No checking -** for duplicate index names is done.) The search order is -** TEMP first, then MAIN, then any auxiliary databases added -** using the ATTACH command. -*/ -SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3 *db, const char *zName, const char *zDb){ - Index *p = 0; - int i; - int nName = sqlite3Strlen30(zName); - /* All mutexes are required for schema access. Make sure we hold them. */ - assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) ); - for(i=OMIT_TEMPDB; inDb; i++){ - int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ - Schema *pSchema = db->aDb[j].pSchema; - assert( pSchema ); - if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zName) ) continue; - assert( sqlite3SchemaMutexHeld(db, j, 0) ); - p = sqlite3HashFind(&pSchema->idxHash, zName, nName); - if( p ) break; + /* Estimate that a[1] is 10, a[2] is 9, a[3] is 8, a[4] is 7, a[5] is + ** 6 and each subsequent value (if any) is 5. */ + memcpy(&a[1], aVal, nCopy*sizeof(LogEst)); + for(i=nCopy+1; i<=pIdx->nKeyCol; i++){ + a[i] = 23; assert( 23==sqlite3LogEst(5) ); } - return p; -} -/* -** Reclaim the memory used by an index -*/ -static void freeIndex(sqlite3 *db, Index *p){ -#ifndef SQLITE_OMIT_ANALYZE - sqlite3DeleteIndexSamples(db, p); -#endif - sqlite3DbFree(db, p->zColAff); - sqlite3DbFree(db, p); + assert( 0==sqlite3LogEst(1) ); + if( IsUniqueIndex(pIdx) ) a[pIdx->nKeyCol] = 0; } /* -** For the index called zIdxName which is found in the database iDb, -** unlike that index from its Table then remove the index from -** the index hash table and free all memory structures associated -** with the index. +** This routine will drop an existing named index. This routine +** implements the DROP INDEX statement. */ -SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3 *db, int iDb, const char *zIdxName){ +SQLITE_PRIVATE void sqlite3DropIndex(Parse *pParse, SrcList *pName, int ifExists){ Index *pIndex; - int len; - Hash *pHash; - - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pHash = &db->aDb[iDb].pSchema->idxHash; - len = sqlite3Strlen30(zIdxName); - pIndex = sqlite3HashInsert(pHash, zIdxName, len, 0); - if( ALWAYS(pIndex) ){ - if( pIndex->pTable->pIndex==pIndex ){ - pIndex->pTable->pIndex = pIndex->pNext; - }else{ - Index *p; - /* Justification of ALWAYS(); The index must be on the list of - ** indices. */ - p = pIndex->pTable->pIndex; - while( ALWAYS(p) && p->pNext!=pIndex ){ p = p->pNext; } - if( ALWAYS(p && p->pNext==pIndex) ){ - p->pNext = pIndex->pNext; - } - } - freeIndex(db, pIndex); - } - db->flags |= SQLITE_InternChanges; -} - -/* -** Erase all schema information from the in-memory hash tables of -** a single database. This routine is called to reclaim memory -** before the database closes. It is also called during a rollback -** if there were schema changes during the transaction or if a -** schema-cookie mismatch occurs. -** -** If iDb<0 then reset the internal schema tables for all database -** files. If iDb>=0 then reset the internal schema for only the -** single file indicated. -*/ -SQLITE_PRIVATE void sqlite3ResetInternalSchema(sqlite3 *db, int iDb){ - int i, j; - assert( iDbnDb ); - - if( iDb>=0 ){ - /* Case 1: Reset the single schema identified by iDb */ - Db *pDb = &db->aDb[iDb]; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); + Vdbe *v; + sqlite3 *db = pParse->db; + int iDb; - /* If any database other than TEMP is reset, then also reset TEMP - ** since TEMP might be holding triggers that reference tables in the - ** other database. - */ - if( iDb!=1 ){ - pDb = &db->aDb[1]; - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); - } - return; + assert( pParse->nErr==0 ); /* Never called with prior errors */ + if( db->mallocFailed ){ + goto exit_drop_index; } - /* Case 2 (from here to the end): Reset all schemas for all attached - ** databases. */ - assert( iDb<0 ); - sqlite3BtreeEnterAll(db); - for(i=0; inDb; i++){ - Db *pDb = &db->aDb[i]; - if( pDb->pSchema ){ - sqlite3SchemaClear(pDb->pSchema); - } + assert( pName->nSrc==1 ); + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + goto exit_drop_index; } - db->flags &= ~SQLITE_InternChanges; - sqlite3VtabUnlockList(db); - sqlite3BtreeLeaveAll(db); - - /* If one or more of the auxiliary database files has been closed, - ** then remove them from the auxiliary database list. We take the - ** opportunity to do this here since we have just deleted all of the - ** schema hash tables and therefore do not have to make any changes - ** to any of those tables. - */ - for(i=j=2; inDb; i++){ - struct Db *pDb = &db->aDb[i]; - if( pDb->pBt==0 ){ - sqlite3DbFree(db, pDb->zName); - pDb->zName = 0; - continue; - } - if( jaDb[j] = db->aDb[i]; + pIndex = sqlite3FindIndex(db, pName->a[0].zName, pName->a[0].zDatabase); + if( pIndex==0 ){ + if( !ifExists ){ + sqlite3ErrorMsg(pParse, "no such index: %S", pName, 0); + }else{ + sqlite3CodeVerifyNamedSchema(pParse, pName->a[0].zDatabase); } - j++; + pParse->checkSchema = 1; + goto exit_drop_index; } - memset(&db->aDb[j], 0, (db->nDb-j)*sizeof(db->aDb[j])); - db->nDb = j; - if( db->nDb<=2 && db->aDb!=db->aDbStatic ){ - memcpy(db->aDbStatic, db->aDb, 2*sizeof(db->aDb[0])); - sqlite3DbFree(db, db->aDb); - db->aDb = db->aDbStatic; + if( pIndex->idxType!=SQLITE_IDXTYPE_APPDEF ){ + sqlite3ErrorMsg(pParse, "index associated with UNIQUE " + "or PRIMARY KEY constraint cannot be dropped", 0); + goto exit_drop_index; } -} - -/* -** This routine is called when a commit occurs. -*/ -SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){ - db->flags &= ~SQLITE_InternChanges; -} - -/* -** Delete memory allocated for the column names of a table or view (the -** Table.aCol[] array). -*/ -static void sqliteDeleteColumnNames(sqlite3 *db, Table *pTable){ - int i; - Column *pCol; - assert( pTable!=0 ); - if( (pCol = pTable->aCol)!=0 ){ - for(i=0; inCol; i++, pCol++){ - sqlite3DbFree(db, pCol->zName); - sqlite3ExprDelete(db, pCol->pDflt); - sqlite3DbFree(db, pCol->zDflt); - sqlite3DbFree(db, pCol->zType); - sqlite3DbFree(db, pCol->zColl); + iDb = sqlite3SchemaToIndex(db, pIndex->pSchema); +#ifndef SQLITE_OMIT_AUTHORIZATION + { + int code = SQLITE_DROP_INDEX; + Table *pTab = pIndex->pTable; + const char *zDb = db->aDb[iDb].zName; + const char *zTab = SCHEMA_TABLE(iDb); + if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){ + goto exit_drop_index; } - sqlite3DbFree(db, pTable->aCol); - } -} - -/* -** Remove the memory data structures associated with the given -** Table. No changes are made to disk by this routine. -** -** This routine just deletes the data structure. It does not unlink -** the table data structure from the hash table. But it does destroy -** memory structures of the indices and foreign keys associated with -** the table. -*/ -SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){ - Index *pIndex, *pNext; - - assert( !pTable || pTable->nRef>0 ); - - /* Do not delete the table until the reference count reaches zero. */ - if( !pTable ) return; - if( ((!db || db->pnBytesFreed==0) && (--pTable->nRef)>0) ) return; - - /* Delete all indices associated with this table. */ - for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){ - pNext = pIndex->pNext; - assert( pIndex->pSchema==pTable->pSchema ); - if( !db || db->pnBytesFreed==0 ){ - char *zName = pIndex->zName; - TESTONLY ( Index *pOld = ) sqlite3HashInsert( - &pIndex->pSchema->idxHash, zName, sqlite3Strlen30(zName), 0 - ); - assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); - assert( pOld==pIndex || pOld==0 ); + if( !OMIT_TEMPDB && iDb ) code = SQLITE_DROP_TEMP_INDEX; + if( sqlite3AuthCheck(pParse, code, pIndex->zName, pTab->zName, zDb) ){ + goto exit_drop_index; } - freeIndex(db, pIndex); } - - /* Delete any foreign keys attached to this table. */ - sqlite3FkDelete(db, pTable); - - /* Delete the Table structure itself. - */ - sqliteDeleteColumnNames(db, pTable); - sqlite3DbFree(db, pTable->zName); - sqlite3DbFree(db, pTable->zColAff); - sqlite3SelectDelete(db, pTable->pSelect); -#ifndef SQLITE_OMIT_CHECK - sqlite3ExprDelete(db, pTable->pCheck); -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - sqlite3VtabClear(db, pTable); #endif - sqlite3DbFree(db, pTable); -} -/* -** Unlink the given table from the hash tables and the delete the -** table structure with all its indices and foreign keys. -*/ -SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3 *db, int iDb, const char *zTabName){ - Table *p; - Db *pDb; + /* Generate code to remove the index and from the master table */ + v = sqlite3GetVdbe(pParse); + if( v ){ + sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3NestedParse(pParse, + "DELETE FROM %Q.%s WHERE name=%Q AND type='index'", + db->aDb[iDb].zName, SCHEMA_TABLE(iDb), pIndex->zName + ); + sqlite3ClearStatTables(pParse, iDb, "idx", pIndex->zName); + sqlite3ChangeCookie(pParse, iDb); + destroyRootPage(pParse, pIndex->tnum, iDb); + sqlite3VdbeAddOp4(v, OP_DropIndex, iDb, 0, 0, pIndex->zName, 0); + } - assert( db!=0 ); - assert( iDb>=0 && iDbnDb ); - assert( zTabName ); - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - testcase( zTabName[0]==0 ); /* Zero-length table names are allowed */ - pDb = &db->aDb[iDb]; - p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, - sqlite3Strlen30(zTabName),0); - sqlite3DeleteTable(db, p); - db->flags |= SQLITE_InternChanges; +exit_drop_index: + sqlite3SrcListDelete(db, pName); } /* -** Given a token, return a string that consists of the text of that -** token. Space to hold the returned string -** is obtained from sqliteMalloc() and must be freed by the calling -** function. +** pArray is a pointer to an array of objects. Each object in the +** array is szEntry bytes in size. This routine uses sqlite3DbRealloc() +** to extend the array so that there is space for a new object at the end. ** -** Any quotation marks (ex: "name", 'name', [name], or `name`) that -** surround the body of the token are removed. +** When this function is called, *pnEntry contains the current size of +** the array (in entries - so the allocation is ((*pnEntry) * szEntry) bytes +** in total). ** -** Tokens are often just pointers into the original SQL text and so -** are not \000 terminated and are not persistent. The returned string -** is \000 terminated and is persistent. +** If the realloc() is successful (i.e. if no OOM condition occurs), the +** space allocated for the new object is zeroed, *pnEntry updated to +** reflect the new size of the array and a pointer to the new allocation +** returned. *pIdx is set to the index of the new array entry in this case. +** +** Otherwise, if the realloc() fails, *pIdx is set to -1, *pnEntry remains +** unchanged and a copy of pArray returned. */ -SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3 *db, Token *pName){ - char *zName; - if( pName ){ - zName = sqlite3DbStrNDup(db, (char*)pName->z, pName->n); - sqlite3Dequote(zName); - }else{ - zName = 0; +SQLITE_PRIVATE void *sqlite3ArrayAllocate( + sqlite3 *db, /* Connection to notify of malloc failures */ + void *pArray, /* Array of objects. Might be reallocated */ + int szEntry, /* Size of each object in the array */ + int *pnEntry, /* Number of objects currently in use */ + int *pIdx /* Write the index of a new slot here */ +){ + char *z; + int n = *pnEntry; + if( (n & (n-1))==0 ){ + int sz = (n==0) ? 1 : 2*n; + void *pNew = sqlite3DbRealloc(db, pArray, sz*szEntry); + if( pNew==0 ){ + *pIdx = -1; + return pArray; + } + pArray = pNew; } - return zName; + z = (char*)pArray; + memset(&z[n * szEntry], 0, szEntry); + *pIdx = n; + ++*pnEntry; + return pArray; } /* -** Open the sqlite_master table stored in database number iDb for -** writing. The table is opened using cursor 0. +** Append a new element to the given IdList. Create a new IdList if +** need be. +** +** A new IdList is returned, or NULL if malloc() fails. */ -SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *p, int iDb){ - Vdbe *v = sqlite3GetVdbe(p); - sqlite3TableLock(p, iDb, MASTER_ROOT, 1, SCHEMA_TABLE(iDb)); - sqlite3VdbeAddOp3(v, OP_OpenWrite, 0, MASTER_ROOT, iDb); - sqlite3VdbeChangeP4(v, -1, (char *)5, P4_INT32); /* 5 column table */ - if( p->nTab==0 ){ - p->nTab = 1; +SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3 *db, IdList *pList, Token *pToken){ + int i; + if( pList==0 ){ + pList = sqlite3DbMallocZero(db, sizeof(IdList) ); + if( pList==0 ) return 0; + } + pList->a = sqlite3ArrayAllocate( + db, + pList->a, + sizeof(pList->a[0]), + &pList->nId, + &i + ); + if( i<0 ){ + sqlite3IdListDelete(db, pList); + return 0; } + pList->a[i].zName = sqlite3NameFromToken(db, pToken); + return pList; } /* -** Parameter zName points to a nul-terminated buffer containing the name -** of a database ("main", "temp" or the name of an attached db). This -** function returns the index of the named database in db->aDb[], or -** -1 if the named db cannot be found. +** Delete an IdList. */ -SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *db, const char *zName){ - int i = -1; /* Database number */ - if( zName ){ - Db *pDb; - int n = sqlite3Strlen30(zName); - for(i=(db->nDb-1), pDb=&db->aDb[i]; i>=0; i--, pDb--){ - if( (!OMIT_TEMPDB || i!=1 ) && n==sqlite3Strlen30(pDb->zName) && - 0==sqlite3StrICmp(pDb->zName, zName) ){ - break; - } - } +SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3 *db, IdList *pList){ + int i; + if( pList==0 ) return; + for(i=0; inId; i++){ + sqlite3DbFree(db, pList->a[i].zName); } - return i; + sqlite3DbFree(db, pList->a); + sqlite3DbFree(db, pList); } /* -** The token *pName contains the name of a database (either "main" or -** "temp" or the name of an attached db). This routine returns the -** index of the named database in db->aDb[], or -1 if the named db -** does not exist. +** Return the index in pList of the identifier named zId. Return -1 +** if not found. */ -SQLITE_PRIVATE int sqlite3FindDb(sqlite3 *db, Token *pName){ - int i; /* Database number */ - char *zName; /* Name we are searching for */ - zName = sqlite3NameFromToken(db, pName); - i = sqlite3FindDbName(db, zName); - sqlite3DbFree(db, zName); - return i; +SQLITE_PRIVATE int sqlite3IdListIndex(IdList *pList, const char *zName){ + int i; + if( pList==0 ) return -1; + for(i=0; inId; i++){ + if( sqlite3StrICmp(pList->a[i].zName, zName)==0 ) return i; + } + return -1; } -/* The table or view or trigger name is passed to this routine via tokens -** pName1 and pName2. If the table name was fully qualified, for example: +/* +** Expand the space allocated for the given SrcList object by +** creating nExtra new slots beginning at iStart. iStart is zero based. +** New slots are zeroed. ** -** CREATE TABLE xxx.yyy (...); -** -** Then pName1 is set to "xxx" and pName2 "yyy". On the other hand if -** the table name is not fully qualified, i.e.: +** For example, suppose a SrcList initially contains two entries: A,B. +** To append 3 new entries onto the end, do this: ** -** CREATE TABLE yyy(...); +** sqlite3SrcListEnlarge(db, pSrclist, 3, 2); ** -** Then pName1 is set to "yyy" and pName2 is "". +** After the call above it would contain: A, B, nil, nil, nil. +** If the iStart argument had been 1 instead of 2, then the result +** would have been: A, nil, nil, nil, B. To prepend the new slots, +** the iStart value would be 0. The result then would +** be: nil, nil, nil, A, B. ** -** This routine sets the *ppUnqual pointer to point at the token (pName1 or -** pName2) that stores the unqualified table name. The index of the -** database "xxx" is returned. +** If a memory allocation fails the SrcList is unchanged. The +** db->mallocFailed flag will be set to true. */ -SQLITE_PRIVATE int sqlite3TwoPartName( - Parse *pParse, /* Parsing and code generating context */ - Token *pName1, /* The "xxx" in the name "xxx.yyy" or "xxx" */ - Token *pName2, /* The "yyy" in the name "xxx.yyy" */ - Token **pUnqual /* Write the unqualified object name here */ +SQLITE_PRIVATE SrcList *sqlite3SrcListEnlarge( + sqlite3 *db, /* Database connection to notify of OOM errors */ + SrcList *pSrc, /* The SrcList to be enlarged */ + int nExtra, /* Number of new slots to add to pSrc->a[] */ + int iStart /* Index in pSrc->a[] of first new slot */ ){ - int iDb; /* Database holding the object */ - sqlite3 *db = pParse->db; + int i; - if( ALWAYS(pName2!=0) && pName2->n>0 ){ - if( db->init.busy ) { - sqlite3ErrorMsg(pParse, "corrupt database"); - pParse->nErr++; - return -1; - } - *pUnqual = pName2; - iDb = sqlite3FindDb(db, pName1); - if( iDb<0 ){ - sqlite3ErrorMsg(pParse, "unknown database %T", pName1); - pParse->nErr++; - return -1; + /* Sanity checking on calling parameters */ + assert( iStart>=0 ); + assert( nExtra>=1 ); + assert( pSrc!=0 ); + assert( iStart<=pSrc->nSrc ); + + /* Allocate additional space if needed */ + if( (u32)pSrc->nSrc+nExtra>pSrc->nAlloc ){ + SrcList *pNew; + int nAlloc = pSrc->nSrc+nExtra; + int nGot; + pNew = sqlite3DbRealloc(db, pSrc, + sizeof(*pSrc) + (nAlloc-1)*sizeof(pSrc->a[0]) ); + if( pNew==0 ){ + assert( db->mallocFailed ); + return pSrc; } - }else{ - assert( db->init.iDb==0 || db->init.busy ); - iDb = db->init.iDb; - *pUnqual = pName1; + pSrc = pNew; + nGot = (sqlite3DbMallocSize(db, pNew) - sizeof(*pSrc))/sizeof(pSrc->a[0])+1; + pSrc->nAlloc = nGot; } - return iDb; -} -/* -** This routine is used to check if the UTF-8 string zName is a legal -** unqualified name for a new schema object (table, index, view or -** trigger). All names are legal except those that begin with the string -** "sqlite_" (in upper, lower or mixed case). This portion of the namespace -** is reserved for internal use. -*/ -SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *pParse, const char *zName){ - if( !pParse->db->init.busy && pParse->nested==0 - && (pParse->db->flags & SQLITE_WriteSchema)==0 - && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ - sqlite3ErrorMsg(pParse, "object name reserved for internal use: %s", zName); - return SQLITE_ERROR; + /* Move existing slots that come after the newly inserted slots + ** out of the way */ + for(i=pSrc->nSrc-1; i>=iStart; i--){ + pSrc->a[i+nExtra] = pSrc->a[i]; } - return SQLITE_OK; + pSrc->nSrc += nExtra; + + /* Zero the newly allocated slots */ + memset(&pSrc->a[iStart], 0, sizeof(pSrc->a[0])*nExtra); + for(i=iStart; ia[i].iCursor = -1; + } + + /* Return a pointer to the enlarged SrcList */ + return pSrc; } + /* -** Begin constructing a new table representation in memory. This is -** the first of several action routines that get called in response -** to a CREATE TABLE statement. In particular, this routine is called -** after seeing tokens "CREATE" and "TABLE" and the table name. The isTemp -** flag is true if the table should be stored in the auxiliary database -** file instead of in the main database file. This is normally the case -** when the "TEMP" or "TEMPORARY" keyword occurs in between -** CREATE and TABLE. +** Append a new table name to the given SrcList. Create a new SrcList if +** need be. A new entry is created in the SrcList even if pTable is NULL. ** -** The new table record is initialized and put in pParse->pNewTable. -** As more of the CREATE TABLE statement is parsed, additional action -** routines will be called to add more information to this record. -** At the end of the CREATE TABLE statement, the sqlite3EndTable() routine -** is called to complete the construction of the new table record. +** A SrcList is returned, or NULL if there is an OOM error. The returned +** SrcList might be the same as the SrcList that was input or it might be +** a new one. If an OOM error does occurs, then the prior value of pList +** that is input to this routine is automatically freed. +** +** If pDatabase is not null, it means that the table has an optional +** database name prefix. Like this: "database.table". The pDatabase +** points to the table name and the pTable points to the database name. +** The SrcList.a[].zName field is filled with the table name which might +** come from pTable (if pDatabase is NULL) or from pDatabase. +** SrcList.a[].zDatabase is filled with the database name from pTable, +** or with NULL if no database is specified. +** +** In other words, if call like this: +** +** sqlite3SrcListAppend(D,A,B,0); +** +** Then B is a table name and the database name is unspecified. If called +** like this: +** +** sqlite3SrcListAppend(D,A,B,C); +** +** Then C is the table name and B is the database name. If C is defined +** then so is B. In other words, we never have a case where: +** +** sqlite3SrcListAppend(D,A,0,C); +** +** Both pTable and pDatabase are assumed to be quoted. They are dequoted +** before being added to the SrcList. */ -SQLITE_PRIVATE void sqlite3StartTable( - Parse *pParse, /* Parser context */ - Token *pName1, /* First part of the name of the table or view */ - Token *pName2, /* Second part of the name of the table or view */ - int isTemp, /* True if this is a TEMP table */ - int isView, /* True if this is a VIEW */ - int isVirtual, /* True if this is a VIRTUAL table */ - int noErr /* Do nothing if table already exists */ +SQLITE_PRIVATE SrcList *sqlite3SrcListAppend( + sqlite3 *db, /* Connection to notify of malloc failures */ + SrcList *pList, /* Append to this SrcList. NULL creates a new SrcList */ + Token *pTable, /* Table to append */ + Token *pDatabase /* Database of the table */ ){ - Table *pTable; - char *zName = 0; /* The name of the new table */ - sqlite3 *db = pParse->db; - Vdbe *v; - int iDb; /* Database number to create the table in */ - Token *pName; /* Unqualified name of the table to create */ - - /* The table or view name to create is passed to this routine via tokens - ** pName1 and pName2. If the table name was fully qualified, for example: - ** - ** CREATE TABLE xxx.yyy (...); - ** - ** Then pName1 is set to "xxx" and pName2 "yyy". On the other hand if - ** the table name is not fully qualified, i.e.: - ** - ** CREATE TABLE yyy(...); - ** - ** Then pName1 is set to "yyy" and pName2 is "". - ** - ** The call below sets the pName pointer to point at the token (pName1 or - ** pName2) that stores the unqualified table name. The variable iDb is - ** set to the index of the database that the table or view is to be - ** created in. - */ - iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); - if( iDb<0 ) return; - if( !OMIT_TEMPDB && isTemp && pName2->n>0 && iDb!=1 ){ - /* If creating a temp table, the name may not be qualified. Unless - ** the database name is "temp" anyway. */ - sqlite3ErrorMsg(pParse, "temporary table name must be unqualified"); - return; - } - if( !OMIT_TEMPDB && isTemp ) iDb = 1; - - pParse->sNameToken = *pName; - zName = sqlite3NameFromToken(db, pName); - if( zName==0 ) return; - if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ - goto begin_table_error; - } - if( db->init.iDb==1 ) isTemp = 1; -#ifndef SQLITE_OMIT_AUTHORIZATION - assert( (isTemp & 1)==isTemp ); - { - int code; - char *zDb = db->aDb[iDb].zName; - if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(isTemp), 0, zDb) ){ - goto begin_table_error; - } - if( isView ){ - if( !OMIT_TEMPDB && isTemp ){ - code = SQLITE_CREATE_TEMP_VIEW; - }else{ - code = SQLITE_CREATE_VIEW; - } - }else{ - if( !OMIT_TEMPDB && isTemp ){ - code = SQLITE_CREATE_TEMP_TABLE; - }else{ - code = SQLITE_CREATE_TABLE; - } - } - if( !isVirtual && sqlite3AuthCheck(pParse, code, zName, 0, zDb) ){ - goto begin_table_error; - } - } -#endif - - /* Make sure the new table name does not collide with an existing - ** index or table name in the same database. Issue an error message if - ** it does. The exception is if the statement being parsed was passed - ** to an sqlite3_declare_vtab() call. In that case only the column names - ** and types will be used, so there is no need to test for namespace - ** collisions. - */ - if( !IN_DECLARE_VTAB ){ - char *zDb = db->aDb[iDb].zName; - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ - goto begin_table_error; - } - pTable = sqlite3FindTable(db, zName, zDb); - if( pTable ){ - if( !noErr ){ - sqlite3ErrorMsg(pParse, "table %T already exists", pName); - }else{ - assert( !db->init.busy ); - sqlite3CodeVerifySchema(pParse, iDb); - } - goto begin_table_error; - } - if( sqlite3FindIndex(db, zName, zDb)!=0 ){ - sqlite3ErrorMsg(pParse, "there is already an index named %s", zName); - goto begin_table_error; - } + struct SrcList_item *pItem; + assert( pDatabase==0 || pTable!=0 ); /* Cannot have C without B */ + if( pList==0 ){ + pList = sqlite3DbMallocZero(db, sizeof(SrcList) ); + if( pList==0 ) return 0; + pList->nAlloc = 1; } - - pTable = sqlite3DbMallocZero(db, sizeof(Table)); - if( pTable==0 ){ - db->mallocFailed = 1; - pParse->rc = SQLITE_NOMEM; - pParse->nErr++; - goto begin_table_error; + pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc); + if( db->mallocFailed ){ + sqlite3SrcListDelete(db, pList); + return 0; } - pTable->zName = zName; - pTable->iPKey = -1; - pTable->pSchema = db->aDb[iDb].pSchema; - pTable->nRef = 1; - pTable->nRowEst = 1000000; - assert( pParse->pNewTable==0 ); - pParse->pNewTable = pTable; - - /* If this is the magic sqlite_sequence table used by autoincrement, - ** then record a pointer to this table in the main database structure - ** so that INSERT can find the table easily. - */ -#ifndef SQLITE_OMIT_AUTOINCREMENT - if( !pParse->nested && strcmp(zName, "sqlite_sequence")==0 ){ - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pTable->pSchema->pSeqTab = pTable; + pItem = &pList->a[pList->nSrc-1]; + if( pDatabase && pDatabase->z==0 ){ + pDatabase = 0; } -#endif - - /* Begin generating the code that will insert the table record into - ** the SQLITE_MASTER table. Note in particular that we must go ahead - ** and allocate the record number for the table entry now. Before any - ** PRIMARY KEY or UNIQUE keywords are parsed. Those keywords will cause - ** indices to be created and the table record must come before the - ** indices. Hence, the record number for the table must be allocated - ** now. - */ - if( !db->init.busy && (v = sqlite3GetVdbe(pParse))!=0 ){ - int j1; - int fileFormat; - int reg1, reg2, reg3; - sqlite3BeginWriteOperation(pParse, 0, iDb); - -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( isVirtual ){ - sqlite3VdbeAddOp0(v, OP_VBegin); - } -#endif - - /* If the file format and encoding in the database have not been set, - ** set them now. - */ - reg1 = pParse->regRowid = ++pParse->nMem; - reg2 = pParse->regRoot = ++pParse->nMem; - reg3 = ++pParse->nMem; - sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, reg3, BTREE_FILE_FORMAT); - sqlite3VdbeUsesBtree(v, iDb); - j1 = sqlite3VdbeAddOp1(v, OP_If, reg3); - fileFormat = (db->flags & SQLITE_LegacyFileFmt)!=0 ? - 1 : SQLITE_MAX_FILE_FORMAT; - sqlite3VdbeAddOp2(v, OP_Integer, fileFormat, reg3); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, reg3); - sqlite3VdbeAddOp2(v, OP_Integer, ENC(db), reg3); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_TEXT_ENCODING, reg3); - sqlite3VdbeJumpHere(v, j1); + if( pDatabase ){ + Token *pTemp = pDatabase; + pDatabase = pTable; + pTable = pTemp; + } + pItem->zName = sqlite3NameFromToken(db, pTable); + pItem->zDatabase = sqlite3NameFromToken(db, pDatabase); + return pList; +} - /* This just creates a place-holder record in the sqlite_master table. - ** The record created does not contain anything yet. It will be replaced - ** by the real entry in code generated at sqlite3EndTable(). - ** - ** The rowid for the new entry is left in register pParse->regRowid. - ** The root page number of the new table is left in reg pParse->regRoot. - ** The rowid and root page number values are needed by the code that - ** sqlite3EndTable will generate. - */ -#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) - if( isView || isVirtual ){ - sqlite3VdbeAddOp2(v, OP_Integer, 0, reg2); - }else -#endif - { - sqlite3VdbeAddOp2(v, OP_CreateTable, iDb, reg2); +/* +** Assign VdbeCursor index numbers to all tables in a SrcList +*/ +SQLITE_PRIVATE void sqlite3SrcListAssignCursors(Parse *pParse, SrcList *pList){ + int i; + struct SrcList_item *pItem; + assert(pList || pParse->db->mallocFailed ); + if( pList ){ + for(i=0, pItem=pList->a; inSrc; i++, pItem++){ + if( pItem->iCursor>=0 ) break; + pItem->iCursor = pParse->nTab++; + if( pItem->pSelect ){ + sqlite3SrcListAssignCursors(pParse, pItem->pSelect->pSrc); + } } - sqlite3OpenMasterTable(pParse, iDb); - sqlite3VdbeAddOp2(v, OP_NewRowid, 0, reg1); - sqlite3VdbeAddOp2(v, OP_Null, 0, reg3); - sqlite3VdbeAddOp3(v, OP_Insert, 0, reg3, reg1); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - sqlite3VdbeAddOp0(v, OP_Close); } - - /* Normal (non-error) return. */ - return; - - /* If an error occurs, we jump here */ -begin_table_error: - sqlite3DbFree(db, zName); - return; } /* -** This macro is used to compare two strings in a case-insensitive manner. -** It is slightly faster than calling sqlite3StrICmp() directly, but -** produces larger code. -** -** WARNING: This macro is not compatible with the strcmp() family. It -** returns true if the two strings are equal, otherwise false. +** Delete an entire SrcList including all its substructure. */ -#define STRICMP(x, y) (\ -sqlite3UpperToLower[*(unsigned char *)(x)]== \ -sqlite3UpperToLower[*(unsigned char *)(y)] \ -&& sqlite3StrICmp((x)+1,(y)+1)==0 ) +SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3 *db, SrcList *pList){ + int i; + struct SrcList_item *pItem; + if( pList==0 ) return; + for(pItem=pList->a, i=0; inSrc; i++, pItem++){ + sqlite3DbFree(db, pItem->zDatabase); + sqlite3DbFree(db, pItem->zName); + sqlite3DbFree(db, pItem->zAlias); + sqlite3DbFree(db, pItem->zIndex); + sqlite3DeleteTable(db, pItem->pTab); + sqlite3SelectDelete(db, pItem->pSelect); + sqlite3ExprDelete(db, pItem->pOn); + sqlite3IdListDelete(db, pItem->pUsing); + } + sqlite3DbFree(db, pList); +} /* -** Add a new column to the table currently being constructed. +** This routine is called by the parser to add a new term to the +** end of a growing FROM clause. The "p" parameter is the part of +** the FROM clause that has already been constructed. "p" is NULL +** if this is the first term of the FROM clause. pTable and pDatabase +** are the name of the table and database named in the FROM clause term. +** pDatabase is NULL if the database name qualifier is missing - the +** usual case. If the term has an alias, then pAlias points to the +** alias token. If the term is a subquery, then pSubquery is the +** SELECT statement that the subquery encodes. The pTable and +** pDatabase parameters are NULL for subqueries. The pOn and pUsing +** parameters are the content of the ON and USING clauses. ** -** The parser calls this routine once for each column declaration -** in a CREATE TABLE statement. sqlite3StartTable() gets called -** first to get things going. Then this routine is called for each -** column. +** Return a new SrcList which encodes is the FROM with the new +** term added. */ -SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName){ - Table *p; - int i; - char *z; - Column *pCol; +SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm( + Parse *pParse, /* Parsing context */ + SrcList *p, /* The left part of the FROM clause already seen */ + Token *pTable, /* Name of the table to add to the FROM clause */ + Token *pDatabase, /* Name of the database containing pTable */ + Token *pAlias, /* The right-hand side of the AS subexpression */ + Select *pSubquery, /* A subquery used in place of a table name */ + Expr *pOn, /* The ON clause of a join */ + IdList *pUsing /* The USING clause of a join */ +){ + struct SrcList_item *pItem; sqlite3 *db = pParse->db; - if( (p = pParse->pNewTable)==0 ) return; -#if SQLITE_MAX_COLUMN - if( p->nCol+1>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many columns on %s", p->zName); - return; + if( !p && (pOn || pUsing) ){ + sqlite3ErrorMsg(pParse, "a JOIN clause is required before %s", + (pOn ? "ON" : "USING") + ); + goto append_from_error; } -#endif - z = sqlite3NameFromToken(db, pName); - if( z==0 ) return; - for(i=0; inCol; i++){ - if( STRICMP(z, p->aCol[i].zName) ){ - sqlite3ErrorMsg(pParse, "duplicate column name: %s", z); - sqlite3DbFree(db, z); - return; - } + p = sqlite3SrcListAppend(db, p, pTable, pDatabase); + if( p==0 || NEVER(p->nSrc==0) ){ + goto append_from_error; } - if( (p->nCol & 0x7)==0 ){ - Column *aNew; - aNew = sqlite3DbRealloc(db,p->aCol,(p->nCol+8)*sizeof(p->aCol[0])); - if( aNew==0 ){ - sqlite3DbFree(db, z); - return; - } - p->aCol = aNew; + pItem = &p->a[p->nSrc-1]; + assert( pAlias!=0 ); + if( pAlias->n ){ + pItem->zAlias = sqlite3NameFromToken(db, pAlias); } - pCol = &p->aCol[p->nCol]; - memset(pCol, 0, sizeof(p->aCol[0])); - pCol->zName = z; - - /* If there is no type specified, columns have the default affinity - ** 'NONE'. If there is a type specified, then sqlite3AddColumnType() will - ** be called next to set pCol->affinity correctly. - */ - pCol->affinity = SQLITE_AFF_NONE; - p->nCol++; + pItem->pSelect = pSubquery; + pItem->pOn = pOn; + pItem->pUsing = pUsing; + return p; + + append_from_error: + assert( p==0 ); + sqlite3ExprDelete(db, pOn); + sqlite3IdListDelete(db, pUsing); + sqlite3SelectDelete(db, pSubquery); + return 0; } /* -** This routine is called by the parser while in the middle of -** parsing a CREATE TABLE statement. A "NOT NULL" constraint has -** been seen on a column. This routine sets the notNull flag on -** the column currently under construction. +** Add an INDEXED BY or NOT INDEXED clause to the most recently added +** element of the source-list passed as the second argument. */ -SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){ - Table *p; - p = pParse->pNewTable; - if( p==0 || NEVER(p->nCol<1) ) return; - p->aCol[p->nCol-1].notNull = (u8)onError; +SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pIndexedBy){ + assert( pIndexedBy!=0 ); + if( p && ALWAYS(p->nSrc>0) ){ + struct SrcList_item *pItem = &p->a[p->nSrc-1]; + assert( pItem->notIndexed==0 && pItem->zIndex==0 ); + if( pIndexedBy->n==1 && !pIndexedBy->z ){ + /* A "NOT INDEXED" clause was supplied. See parse.y + ** construct "indexed_opt" for details. */ + pItem->notIndexed = 1; + }else{ + pItem->zIndex = sqlite3NameFromToken(pParse->db, pIndexedBy); + } + } } /* -** Scan the column type name zType (length nType) and return the -** associated affinity type. +** When building up a FROM clause in the parser, the join operator +** is initially attached to the left operand. But the code generator +** expects the join operator to be on the right operand. This routine +** Shifts all join operators from left to right for an entire FROM +** clause. ** -** This routine does a case-independent search of zType for the -** substrings in the following table. If one of the substrings is -** found, the corresponding affinity is returned. If zType contains -** more than one of the substrings, entries toward the top of -** the table take priority. For example, if zType is 'BLOBINT', -** SQLITE_AFF_INTEGER is returned. +** Example: Suppose the join is like this: ** -** Substring | Affinity -** -------------------------------- -** 'INT' | SQLITE_AFF_INTEGER -** 'CHAR' | SQLITE_AFF_TEXT -** 'CLOB' | SQLITE_AFF_TEXT -** 'TEXT' | SQLITE_AFF_TEXT -** 'BLOB' | SQLITE_AFF_NONE -** 'REAL' | SQLITE_AFF_REAL -** 'FLOA' | SQLITE_AFF_REAL -** 'DOUB' | SQLITE_AFF_REAL +** A natural cross join B ** -** If none of the substrings in the above table are found, -** SQLITE_AFF_NUMERIC is returned. +** The operator is "natural cross join". The A and B operands are stored +** in p->a[0] and p->a[1], respectively. The parser initially stores the +** operator with A. This routine shifts that operator over to B. */ -SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn){ - u32 h = 0; - char aff = SQLITE_AFF_NUMERIC; +SQLITE_PRIVATE void sqlite3SrcListShiftJoinType(SrcList *p){ + if( p ){ + int i; + assert( p->a || p->nSrc==0 ); + for(i=p->nSrc-1; i>0; i--){ + p->a[i].jointype = p->a[i-1].jointype; + } + p->a[0].jointype = 0; + } +} - if( zIn ) while( zIn[0] ){ - h = (h<<8) + sqlite3UpperToLower[(*zIn)&0xff]; - zIn++; - if( h==(('c'<<24)+('h'<<16)+('a'<<8)+'r') ){ /* CHAR */ - aff = SQLITE_AFF_TEXT; - }else if( h==(('c'<<24)+('l'<<16)+('o'<<8)+'b') ){ /* CLOB */ - aff = SQLITE_AFF_TEXT; - }else if( h==(('t'<<24)+('e'<<16)+('x'<<8)+'t') ){ /* TEXT */ - aff = SQLITE_AFF_TEXT; - }else if( h==(('b'<<24)+('l'<<16)+('o'<<8)+'b') /* BLOB */ - && (aff==SQLITE_AFF_NUMERIC || aff==SQLITE_AFF_REAL) ){ - aff = SQLITE_AFF_NONE; -#ifndef SQLITE_OMIT_FLOATING_POINT - }else if( h==(('r'<<24)+('e'<<16)+('a'<<8)+'l') /* REAL */ - && aff==SQLITE_AFF_NUMERIC ){ - aff = SQLITE_AFF_REAL; - }else if( h==(('f'<<24)+('l'<<16)+('o'<<8)+'a') /* FLOA */ - && aff==SQLITE_AFF_NUMERIC ){ - aff = SQLITE_AFF_REAL; - }else if( h==(('d'<<24)+('o'<<16)+('u'<<8)+'b') /* DOUB */ - && aff==SQLITE_AFF_NUMERIC ){ - aff = SQLITE_AFF_REAL; -#endif - }else if( (h&0x00FFFFFF)==(('i'<<16)+('n'<<8)+'t') ){ /* INT */ - aff = SQLITE_AFF_INTEGER; - break; +/* +** Begin a transaction +*/ +SQLITE_PRIVATE void sqlite3BeginTransaction(Parse *pParse, int type){ + sqlite3 *db; + Vdbe *v; + int i; + + assert( pParse!=0 ); + db = pParse->db; + assert( db!=0 ); +/* if( db->aDb[0].pBt==0 ) return; */ + if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "BEGIN", 0, 0) ){ + return; + } + v = sqlite3GetVdbe(pParse); + if( !v ) return; + if( type!=TK_DEFERRED ){ + for(i=0; inDb; i++){ + sqlite3VdbeAddOp2(v, OP_Transaction, i, (type==TK_EXCLUSIVE)+1); + sqlite3VdbeUsesBtree(v, i); } } + sqlite3VdbeAddOp2(v, OP_AutoCommit, 0, 0); +} - return aff; +/* +** Commit a transaction +*/ +SQLITE_PRIVATE void sqlite3CommitTransaction(Parse *pParse){ + Vdbe *v; + + assert( pParse!=0 ); + assert( pParse->db!=0 ); + if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "COMMIT", 0, 0) ){ + return; + } + v = sqlite3GetVdbe(pParse); + if( v ){ + sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 0); + } } /* -** This routine is called by the parser while in the middle of -** parsing a CREATE TABLE statement. The pFirst token is the first -** token in the sequence of tokens that describe the type of the -** column currently under construction. pLast is the last token -** in the sequence. Use this information to construct a string -** that contains the typename of the column and store that string -** in zType. -*/ -SQLITE_PRIVATE void sqlite3AddColumnType(Parse *pParse, Token *pType){ - Table *p; - Column *pCol; +** Rollback a transaction +*/ +SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse *pParse){ + Vdbe *v; - p = pParse->pNewTable; - if( p==0 || NEVER(p->nCol<1) ) return; - pCol = &p->aCol[p->nCol-1]; - assert( pCol->zType==0 ); - pCol->zType = sqlite3NameFromToken(pParse->db, pType); - pCol->affinity = sqlite3AffinityType(pCol->zType); + assert( pParse!=0 ); + assert( pParse->db!=0 ); + if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "ROLLBACK", 0, 0) ){ + return; + } + v = sqlite3GetVdbe(pParse); + if( v ){ + sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 1); + } } /* -** The expression is the default value for the most recently added column -** of the table currently under construction. -** -** Default value expressions must be constant. Raise an exception if this -** is not the case. -** -** This routine is called by the parser while in the middle of -** parsing a CREATE TABLE statement. +** This function is called by the parser when it parses a command to create, +** release or rollback an SQL savepoint. */ -SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse *pParse, ExprSpan *pSpan){ - Table *p; - Column *pCol; - sqlite3 *db = pParse->db; - p = pParse->pNewTable; - if( p!=0 ){ - pCol = &(p->aCol[p->nCol-1]); - if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr) ){ - sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant", - pCol->zName); - }else{ - /* A copy of pExpr is used instead of the original, as pExpr contains - ** tokens that point to volatile memory. The 'span' of the expression - ** is required by pragma table_info. - */ - sqlite3ExprDelete(db, pCol->pDflt); - pCol->pDflt = sqlite3ExprDup(db, pSpan->pExpr, EXPRDUP_REDUCE); - sqlite3DbFree(db, pCol->zDflt); - pCol->zDflt = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); +SQLITE_PRIVATE void sqlite3Savepoint(Parse *pParse, int op, Token *pName){ + char *zName = sqlite3NameFromToken(pParse->db, pName); + if( zName ){ + Vdbe *v = sqlite3GetVdbe(pParse); +#ifndef SQLITE_OMIT_AUTHORIZATION + static const char * const az[] = { "BEGIN", "RELEASE", "ROLLBACK" }; + assert( !SAVEPOINT_BEGIN && SAVEPOINT_RELEASE==1 && SAVEPOINT_ROLLBACK==2 ); +#endif + if( !v || sqlite3AuthCheck(pParse, SQLITE_SAVEPOINT, az[op], zName, 0) ){ + sqlite3DbFree(pParse->db, zName); + return; } + sqlite3VdbeAddOp4(v, OP_Savepoint, op, 0, 0, zName, P4_DYNAMIC); } - sqlite3ExprDelete(db, pSpan->pExpr); } /* -** Designate the PRIMARY KEY for the table. pList is a list of names -** of columns that form the primary key. If pList is NULL, then the -** most recently added column of the table is the primary key. -** -** A table can have at most one primary key. If the table already has -** a primary key (and this is the second primary key) then create an -** error. -** -** If the PRIMARY KEY is on a single column whose datatype is INTEGER, -** then we will try to use that column as the rowid. Set the Table.iPKey -** field of the table under construction to be the index of the -** INTEGER PRIMARY KEY column. Table.iPKey is set to -1 if there is -** no INTEGER PRIMARY KEY. -** -** If the key is not an INTEGER PRIMARY KEY, then create a unique -** index for the key. No index is created for INTEGER PRIMARY KEYs. +** Make sure the TEMP database is open and available for use. Return +** the number of errors. Leave any error messages in the pParse structure. */ -SQLITE_PRIVATE void sqlite3AddPrimaryKey( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* List of field names to be indexed */ - int onError, /* What to do with a uniqueness conflict */ - int autoInc, /* True if the AUTOINCREMENT keyword is present */ - int sortOrder /* SQLITE_SO_ASC or SQLITE_SO_DESC */ -){ - Table *pTab = pParse->pNewTable; - char *zType = 0; - int iCol = -1, i; - if( pTab==0 || IN_DECLARE_VTAB ) goto primary_key_exit; - if( pTab->tabFlags & TF_HasPrimaryKey ){ - sqlite3ErrorMsg(pParse, - "table \"%s\" has more than one primary key", pTab->zName); - goto primary_key_exit; - } - pTab->tabFlags |= TF_HasPrimaryKey; - if( pList==0 ){ - iCol = pTab->nCol - 1; - pTab->aCol[iCol].isPrimKey = 1; - }else{ - for(i=0; inExpr; i++){ - for(iCol=0; iColnCol; iCol++){ - if( sqlite3StrICmp(pList->a[i].zName, pTab->aCol[iCol].zName)==0 ){ - break; - } - } - if( iColnCol ){ - pTab->aCol[iCol].isPrimKey = 1; - } +SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *pParse){ + sqlite3 *db = pParse->db; + if( db->aDb[1].pBt==0 && !pParse->explain ){ + int rc; + Btree *pBt; + static const int flags = + SQLITE_OPEN_READWRITE | + SQLITE_OPEN_CREATE | + SQLITE_OPEN_EXCLUSIVE | + SQLITE_OPEN_DELETEONCLOSE | + SQLITE_OPEN_TEMP_DB; + + rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pBt, 0, flags); + if( rc!=SQLITE_OK ){ + sqlite3ErrorMsg(pParse, "unable to open a temporary database " + "file for storing temporary tables"); + pParse->rc = rc; + return 1; + } + db->aDb[1].pBt = pBt; + assert( db->aDb[1].pSchema ); + if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1, 0) ){ + db->mallocFailed = 1; + return 1; } - if( pList->nExpr>1 ) iCol = -1; } - if( iCol>=0 && iColnCol ){ - zType = pTab->aCol[iCol].zType; + return 0; +} + +/* +** Record the fact that the schema cookie will need to be verified +** for database iDb. The code to actually verify the schema cookie +** will occur at the end of the top-level VDBE and will be generated +** later, by sqlite3FinishCoding(). +*/ +SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + sqlite3 *db = pToplevel->db; + + assert( iDb>=0 && iDbnDb ); + assert( db->aDb[iDb].pBt!=0 || iDb==1 ); + assert( iDbcookieMask, iDb)==0 ){ + DbMaskSet(pToplevel->cookieMask, iDb); + pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie; + if( !OMIT_TEMPDB && iDb==1 ){ + sqlite3OpenTempDatabase(pToplevel); + } } - if( zType && sqlite3StrICmp(zType, "INTEGER")==0 - && sortOrder==SQLITE_SO_ASC ){ - pTab->iPKey = iCol; - pTab->keyConf = (u8)onError; - assert( autoInc==0 || autoInc==1 ); - pTab->tabFlags |= autoInc*TF_Autoincrement; - }else if( autoInc ){ -#ifndef SQLITE_OMIT_AUTOINCREMENT - sqlite3ErrorMsg(pParse, "AUTOINCREMENT is only allowed on an " - "INTEGER PRIMARY KEY"); -#endif - }else{ - Index *p; - p = sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0, 0, sortOrder, 0); - if( p ){ - p->autoIndex = 2; +} + +/* +** If argument zDb is NULL, then call sqlite3CodeVerifySchema() for each +** attached database. Otherwise, invoke it for the database named zDb only. +*/ +SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse *pParse, const char *zDb){ + sqlite3 *db = pParse->db; + int i; + for(i=0; inDb; i++){ + Db *pDb = &db->aDb[i]; + if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zName)) ){ + sqlite3CodeVerifySchema(pParse, i); } - pList = 0; } +} -primary_key_exit: - sqlite3ExprListDelete(pParse->db, pList); - return; +/* +** Generate VDBE code that prepares for doing an operation that +** might change the database. +** +** This routine starts a new transaction if we are not already within +** a transaction. If we are already within a transaction, then a checkpoint +** is set if the setStatement parameter is true. A checkpoint should +** be set for operations that might fail (due to a constraint) part of +** the way through and which will need to undo some writes without having to +** rollback the whole transaction. For operations where all constraints +** can be checked before any changes are made to the database, it is never +** necessary to undo a write and the checkpoint should not be set. +*/ +SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse *pParse, int setStatement, int iDb){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + sqlite3CodeVerifySchema(pParse, iDb); + DbMaskSet(pToplevel->writeMask, iDb); + pToplevel->isMultiWrite |= setStatement; +} + +/* +** Indicate that the statement currently under construction might write +** more than one entry (example: deleting one row then inserting another, +** inserting multiple rows in a table, or inserting a row and index entries.) +** If an abort occurs after some of these writes have completed, then it will +** be necessary to undo the completed writes. +*/ +SQLITE_PRIVATE void sqlite3MultiWrite(Parse *pParse){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + pToplevel->isMultiWrite = 1; +} + +/* +** The code generator calls this routine if is discovers that it is +** possible to abort a statement prior to completion. In order to +** perform this abort without corrupting the database, we need to make +** sure that the statement is protected by a statement transaction. +** +** Technically, we only need to set the mayAbort flag if the +** isMultiWrite flag was previously set. There is a time dependency +** such that the abort must occur after the multiwrite. This makes +** some statements involving the REPLACE conflict resolution algorithm +** go a little faster. But taking advantage of this time dependency +** makes it more difficult to prove that the code is correct (in +** particular, it prevents us from writing an effective +** implementation of sqlite3AssertMayAbort()) and so we have chosen +** to take the safe route and skip the optimization. +*/ +SQLITE_PRIVATE void sqlite3MayAbort(Parse *pParse){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + pToplevel->mayAbort = 1; } /* -** Add a new CHECK constraint to the table currently under construction. +** Code an OP_Halt that causes the vdbe to return an SQLITE_CONSTRAINT +** error. The onError parameter determines which (if any) of the statement +** and/or current transaction is rolled back. */ -SQLITE_PRIVATE void sqlite3AddCheckConstraint( +SQLITE_PRIVATE void sqlite3HaltConstraint( Parse *pParse, /* Parsing context */ - Expr *pCheckExpr /* The check expression */ + int errCode, /* extended error code */ + int onError, /* Constraint type */ + char *p4, /* Error message */ + i8 p4type, /* P4_STATIC or P4_TRANSIENT */ + u8 p5Errmsg /* P5_ErrMsg type */ ){ - sqlite3 *db = pParse->db; -#ifndef SQLITE_OMIT_CHECK - Table *pTab = pParse->pNewTable; - if( pTab && !IN_DECLARE_VTAB ){ - pTab->pCheck = sqlite3ExprAnd(db, pTab->pCheck, pCheckExpr); - }else -#endif - { - sqlite3ExprDelete(db, pCheckExpr); - } -} - -/* -** Set the collation function of the most recently parsed table column -** to the CollSeq given. -*/ -SQLITE_PRIVATE void sqlite3AddCollateType(Parse *pParse, Token *pToken){ - Table *p; - int i; - char *zColl; /* Dequoted name of collation sequence */ - sqlite3 *db; - - if( (p = pParse->pNewTable)==0 ) return; - i = p->nCol-1; - db = pParse->db; - zColl = sqlite3NameFromToken(db, pToken); - if( !zColl ) return; - - if( sqlite3LocateCollSeq(pParse, zColl) ){ - Index *pIdx; - p->aCol[i].zColl = zColl; - - /* If the column is declared as " PRIMARY KEY COLLATE ", - ** then an index may have been created on this column before the - ** collation type was added. Correct this if it is the case. - */ - for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){ - assert( pIdx->nColumn==1 ); - if( pIdx->aiColumn[0]==i ){ - pIdx->azColl[0] = p->aCol[i].zColl; - } - } - }else{ - sqlite3DbFree(db, zColl); + Vdbe *v = sqlite3GetVdbe(pParse); + assert( (errCode&0xff)==SQLITE_CONSTRAINT ); + if( onError==OE_Abort ){ + sqlite3MayAbort(pParse); } + sqlite3VdbeAddOp4(v, OP_Halt, errCode, onError, 0, p4, p4type); + if( p5Errmsg ) sqlite3VdbeChangeP5(v, p5Errmsg); } /* -** This function returns the collation sequence for database native text -** encoding identified by the string zName, length nName. -** -** If the requested collation sequence is not available, or not available -** in the database native encoding, the collation factory is invoked to -** request it. If the collation factory does not supply such a sequence, -** and the sequence is available in another text encoding, then that is -** returned instead. -** -** If no versions of the requested collations sequence are available, or -** another error occurs, NULL is returned and an error message written into -** pParse. -** -** This routine is a wrapper around sqlite3FindCollSeq(). This routine -** invokes the collation factory if the named collation cannot be found -** and generates an error message. -** -** See also: sqlite3FindCollSeq(), sqlite3GetCollSeq() +** Code an OP_Halt due to UNIQUE or PRIMARY KEY constraint violation. */ -SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char *zName){ - sqlite3 *db = pParse->db; - u8 enc = ENC(db); - u8 initbusy = db->init.busy; - CollSeq *pColl; +SQLITE_PRIVATE void sqlite3UniqueConstraint( + Parse *pParse, /* Parsing context */ + int onError, /* Constraint type */ + Index *pIdx /* The index that triggers the constraint */ +){ + char *zErr; + int j; + StrAccum errMsg; + Table *pTab = pIdx->pTable; - pColl = sqlite3FindCollSeq(db, enc, zName, initbusy); - if( !initbusy && (!pColl || !pColl->xCmp) ){ - pColl = sqlite3GetCollSeq(db, enc, pColl, zName); - if( !pColl ){ - sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName); - } + sqlite3StrAccumInit(&errMsg, 0, 0, 200); + errMsg.db = pParse->db; + for(j=0; jnKeyCol; j++){ + char *zCol = pTab->aCol[pIdx->aiColumn[j]].zName; + if( j ) sqlite3StrAccumAppend(&errMsg, ", ", 2); + sqlite3StrAccumAppendAll(&errMsg, pTab->zName); + sqlite3StrAccumAppend(&errMsg, ".", 1); + sqlite3StrAccumAppendAll(&errMsg, zCol); } - - return pColl; + zErr = sqlite3StrAccumFinish(&errMsg); + sqlite3HaltConstraint(pParse, + IsPrimaryKeyIndex(pIdx) ? SQLITE_CONSTRAINT_PRIMARYKEY + : SQLITE_CONSTRAINT_UNIQUE, + onError, zErr, P4_DYNAMIC, P5_ConstraintUnique); } /* -** Generate code that will increment the schema cookie. -** -** The schema cookie is used to determine when the schema for the -** database changes. After each schema change, the cookie value -** changes. When a process first reads the schema it records the -** cookie. Thereafter, whenever it goes to access the database, -** it checks the cookie to make sure the schema has not changed -** since it was last read. -** -** This plan is not completely bullet-proof. It is possible for -** the schema to change multiple times and for the cookie to be -** set back to prior value. But schema changes are infrequent -** and the probability of hitting the same cookie value is only -** 1 chance in 2^32. So we're safe enough. +** Code an OP_Halt due to non-unique rowid. */ -SQLITE_PRIVATE void sqlite3ChangeCookie(Parse *pParse, int iDb){ - int r1 = sqlite3GetTempReg(pParse); - sqlite3 *db = pParse->db; - Vdbe *v = pParse->pVdbe; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - sqlite3VdbeAddOp2(v, OP_Integer, db->aDb[iDb].pSchema->schema_cookie+1, r1); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION, r1); - sqlite3ReleaseTempReg(pParse, r1); +SQLITE_PRIVATE void sqlite3RowidConstraint( + Parse *pParse, /* Parsing context */ + int onError, /* Conflict resolution algorithm */ + Table *pTab /* The table with the non-unique rowid */ +){ + char *zMsg; + int rc; + if( pTab->iPKey>=0 ){ + zMsg = sqlite3MPrintf(pParse->db, "%s.%s", pTab->zName, + pTab->aCol[pTab->iPKey].zName); + rc = SQLITE_CONSTRAINT_PRIMARYKEY; + }else{ + zMsg = sqlite3MPrintf(pParse->db, "%s.rowid", pTab->zName); + rc = SQLITE_CONSTRAINT_ROWID; + } + sqlite3HaltConstraint(pParse, rc, onError, zMsg, P4_DYNAMIC, + P5_ConstraintUnique); } /* -** Measure the number of characters needed to output the given -** identifier. The number returned includes any quotes used -** but does not include the null terminator. -** -** The estimate is conservative. It might be larger that what is -** really needed. +** Check to see if pIndex uses the collating sequence pColl. Return +** true if it does and false if it does not. */ -static int identLength(const char *z){ - int n; - for(n=0; *z; n++, z++){ - if( *z=='"' ){ n++; } +#ifndef SQLITE_OMIT_REINDEX +static int collationMatch(const char *zColl, Index *pIndex){ + int i; + assert( zColl!=0 ); + for(i=0; inColumn; i++){ + const char *z = pIndex->azColl[i]; + assert( z!=0 || pIndex->aiColumn[i]<0 ); + if( pIndex->aiColumn[i]>=0 && 0==sqlite3StrICmp(z, zColl) ){ + return 1; + } } - return n + 2; + return 0; } +#endif /* -** The first parameter is a pointer to an output buffer. The second -** parameter is a pointer to an integer that contains the offset at -** which to write into the output buffer. This function copies the -** nul-terminated string pointed to by the third parameter, zSignedIdent, -** to the specified offset in the buffer and updates *pIdx to refer -** to the first byte after the last byte written before returning. -** -** If the string zSignedIdent consists entirely of alpha-numeric -** characters, does not begin with a digit and is not an SQL keyword, -** then it is copied to the output buffer exactly as it is. Otherwise, -** it is quoted using double-quotes. +** Recompute all indices of pTab that use the collating sequence pColl. +** If pColl==0 then recompute all indices of pTab. */ -static void identPut(char *z, int *pIdx, char *zSignedIdent){ - unsigned char *zIdent = (unsigned char*)zSignedIdent; - int i, j, needQuote; - i = *pIdx; - - for(j=0; zIdent[j]; j++){ - if( !sqlite3Isalnum(zIdent[j]) && zIdent[j]!='_' ) break; - } - needQuote = sqlite3Isdigit(zIdent[0]) || sqlite3KeywordCode(zIdent, j)!=TK_ID; - if( !needQuote ){ - needQuote = zIdent[j]; - } +#ifndef SQLITE_OMIT_REINDEX +static void reindexTable(Parse *pParse, Table *pTab, char const *zColl){ + Index *pIndex; /* An index associated with pTab */ - if( needQuote ) z[i++] = '"'; - for(j=0; zIdent[j]; j++){ - z[i++] = zIdent[j]; - if( zIdent[j]=='"' ) z[i++] = '"'; + for(pIndex=pTab->pIndex; pIndex; pIndex=pIndex->pNext){ + if( zColl==0 || collationMatch(zColl, pIndex) ){ + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + sqlite3BeginWriteOperation(pParse, 0, iDb); + sqlite3RefillIndex(pParse, pIndex, -1); + } } - if( needQuote ) z[i++] = '"'; - z[i] = 0; - *pIdx = i; } +#endif /* -** Generate a CREATE TABLE statement appropriate for the given -** table. Memory to hold the text of the statement is obtained -** from sqliteMalloc() and must be freed by the calling function. +** Recompute all indices of all tables in all databases where the +** indices use the collating sequence pColl. If pColl==0 then recompute +** all indices everywhere. */ -static char *createTableStmt(sqlite3 *db, Table *p){ - int i, k, n; - char *zStmt; - char *zSep, *zSep2, *zEnd; - Column *pCol; - n = 0; - for(pCol = p->aCol, i=0; inCol; i++, pCol++){ - n += identLength(pCol->zName) + 5; - } - n += identLength(p->zName); - if( n<50 ){ - zSep = ""; - zSep2 = ","; - zEnd = ")"; - }else{ - zSep = "\n "; - zSep2 = ",\n "; - zEnd = "\n)"; - } - n += 35 + 6*p->nCol; - zStmt = sqlite3DbMallocRaw(0, n); - if( zStmt==0 ){ - db->mallocFailed = 1; - return 0; - } - sqlite3_snprintf(n, zStmt, "CREATE TABLE "); - k = sqlite3Strlen30(zStmt); - identPut(zStmt, &k, p->zName); - zStmt[k++] = '('; - for(pCol=p->aCol, i=0; inCol; i++, pCol++){ - static const char * const azType[] = { - /* SQLITE_AFF_TEXT */ " TEXT", - /* SQLITE_AFF_NONE */ "", - /* SQLITE_AFF_NUMERIC */ " NUM", - /* SQLITE_AFF_INTEGER */ " INT", - /* SQLITE_AFF_REAL */ " REAL" - }; - int len; - const char *zType; +#ifndef SQLITE_OMIT_REINDEX +static void reindexDatabases(Parse *pParse, char const *zColl){ + Db *pDb; /* A single database */ + int iDb; /* The database index number */ + sqlite3 *db = pParse->db; /* The database connection */ + HashElem *k; /* For looping over tables in pDb */ + Table *pTab; /* A table in the database */ - sqlite3_snprintf(n-k, &zStmt[k], zSep); - k += sqlite3Strlen30(&zStmt[k]); - zSep = zSep2; - identPut(zStmt, &k, pCol->zName); - assert( pCol->affinity-SQLITE_AFF_TEXT >= 0 ); - assert( pCol->affinity-SQLITE_AFF_TEXT < ArraySize(azType) ); - testcase( pCol->affinity==SQLITE_AFF_TEXT ); - testcase( pCol->affinity==SQLITE_AFF_NONE ); - testcase( pCol->affinity==SQLITE_AFF_NUMERIC ); - testcase( pCol->affinity==SQLITE_AFF_INTEGER ); - testcase( pCol->affinity==SQLITE_AFF_REAL ); - - zType = azType[pCol->affinity - SQLITE_AFF_TEXT]; - len = sqlite3Strlen30(zType); - assert( pCol->affinity==SQLITE_AFF_NONE - || pCol->affinity==sqlite3AffinityType(zType) ); - memcpy(&zStmt[k], zType, len); - k += len; - assert( k<=n ); + assert( sqlite3BtreeHoldsAllMutexes(db) ); /* Needed for schema access */ + for(iDb=0, pDb=db->aDb; iDbnDb; iDb++, pDb++){ + assert( pDb!=0 ); + for(k=sqliteHashFirst(&pDb->pSchema->tblHash); k; k=sqliteHashNext(k)){ + pTab = (Table*)sqliteHashData(k); + reindexTable(pParse, pTab, zColl); + } } - sqlite3_snprintf(n-k, &zStmt[k], "%s", zEnd); - return zStmt; } +#endif /* -** This routine is called to report the final ")" that terminates -** a CREATE TABLE statement. -** -** The table structure that other action routines have been building -** is added to the internal hash tables, assuming no errors have -** occurred. +** Generate code for the REINDEX command. ** -** An entry for the table is made in the master table on disk, unless -** this is a temporary table or db->init.busy==1. When db->init.busy==1 -** it means we are reading the sqlite_master table because we just -** connected to the database or because the sqlite_master table has -** recently changed, so the entry for this table already exists in -** the sqlite_master table. We do not want to create it again. +** REINDEX -- 1 +** REINDEX -- 2 +** REINDEX ?.? -- 3 +** REINDEX ?.? -- 4 ** -** If the pSelect argument is not NULL, it means that this routine -** was called to create a table generated from a -** "CREATE TABLE ... AS SELECT ..." statement. The column names of -** the new table will match the result set of the SELECT. +** Form 1 causes all indices in all attached databases to be rebuilt. +** Form 2 rebuilds all indices in all databases that use the named +** collating function. Forms 3 and 4 rebuild the named index or all +** indices associated with the named table. */ -SQLITE_PRIVATE void sqlite3EndTable( - Parse *pParse, /* Parse context */ - Token *pCons, /* The ',' token after the last column defn. */ - Token *pEnd, /* The final ')' token in the CREATE TABLE */ - Select *pSelect /* Select from a "CREATE ... AS SELECT" */ -){ - Table *p; - sqlite3 *db = pParse->db; - int iDb; +#ifndef SQLITE_OMIT_REINDEX +SQLITE_PRIVATE void sqlite3Reindex(Parse *pParse, Token *pName1, Token *pName2){ + CollSeq *pColl; /* Collating sequence to be reindexed, or NULL */ + char *z; /* Name of a table or index */ + const char *zDb; /* Name of the database */ + Table *pTab; /* A table in the database */ + Index *pIndex; /* An index associated with pTab */ + int iDb; /* The database index number */ + sqlite3 *db = pParse->db; /* The database connection */ + Token *pObjName; /* Name of the table or index to be reindexed */ - if( (pEnd==0 && pSelect==0) || db->mallocFailed ){ + /* Read the database schema. If an error occurs, leave an error message + ** and code in pParse and return NULL. */ + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ return; } - p = pParse->pNewTable; - if( p==0 ) return; - - assert( !db->init.busy || !pSelect ); - - iDb = sqlite3SchemaToIndex(db, p->pSchema); - -#ifndef SQLITE_OMIT_CHECK - /* Resolve names in all CHECK constraint expressions. - */ - if( p->pCheck ){ - SrcList sSrc; /* Fake SrcList for pParse->pNewTable */ - NameContext sNC; /* Name context for pParse->pNewTable */ - memset(&sNC, 0, sizeof(sNC)); - memset(&sSrc, 0, sizeof(sSrc)); - sSrc.nSrc = 1; - sSrc.a[0].zName = p->zName; - sSrc.a[0].pTab = p; - sSrc.a[0].iCursor = -1; - sNC.pParse = pParse; - sNC.pSrcList = &sSrc; - sNC.isCheck = 1; - if( sqlite3ResolveExprNames(&sNC, p->pCheck) ){ + if( pName1==0 ){ + reindexDatabases(pParse, 0); + return; + }else if( NEVER(pName2==0) || pName2->z==0 ){ + char *zColl; + assert( pName1->z ); + zColl = sqlite3NameFromToken(pParse->db, pName1); + if( !zColl ) return; + pColl = sqlite3FindCollSeq(db, ENC(db), zColl, 0); + if( pColl ){ + reindexDatabases(pParse, zColl); + sqlite3DbFree(db, zColl); return; } + sqlite3DbFree(db, zColl); } -#endif /* !defined(SQLITE_OMIT_CHECK) */ - - /* If the db->init.busy is 1 it means we are reading the SQL off the - ** "sqlite_master" or "sqlite_temp_master" table on the disk. - ** So do not write to the disk again. Extract the root page number - ** for the table from the db->init.newTnum field. (The page number - ** should have been put there by the sqliteOpenCb routine.) - */ - if( db->init.busy ){ - p->tnum = db->init.newTnum; + iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pObjName); + if( iDb<0 ) return; + z = sqlite3NameFromToken(db, pObjName); + if( z==0 ) return; + zDb = db->aDb[iDb].zName; + pTab = sqlite3FindTable(db, z, zDb); + if( pTab ){ + reindexTable(pParse, pTab, 0); + sqlite3DbFree(db, z); + return; } - - /* If not initializing, then create a record for the new table - ** in the SQLITE_MASTER table of the database. - ** - ** If this is a TEMPORARY table, write the entry into the auxiliary - ** file instead of into the main database file. - */ - if( !db->init.busy ){ - int n; - Vdbe *v; - char *zType; /* "view" or "table" */ - char *zType2; /* "VIEW" or "TABLE" */ - char *zStmt; /* Text of the CREATE TABLE or CREATE VIEW statement */ - - v = sqlite3GetVdbe(pParse); - if( NEVER(v==0) ) return; - - sqlite3VdbeAddOp1(v, OP_Close, 0); - - /* - ** Initialize zType for the new view or table. - */ - if( p->pSelect==0 ){ - /* A regular table */ - zType = "table"; - zType2 = "TABLE"; -#ifndef SQLITE_OMIT_VIEW - }else{ - /* A view */ - zType = "view"; - zType2 = "VIEW"; -#endif - } - - /* If this is a CREATE TABLE xx AS SELECT ..., execute the SELECT - ** statement to populate the new table. The root-page number for the - ** new table is in register pParse->regRoot. - ** - ** Once the SELECT has been coded by sqlite3Select(), it is in a - ** suitable state to query for the column names and types to be used - ** by the new table. - ** - ** A shared-cache write-lock is not required to write to the new table, - ** as a schema-lock must have already been obtained to create it. Since - ** a schema-lock excludes all other database users, the write-lock would - ** be redundant. - */ - if( pSelect ){ - SelectDest dest; - Table *pSelTab; - - assert(pParse->nTab==1); - sqlite3VdbeAddOp3(v, OP_OpenWrite, 1, pParse->regRoot, iDb); - sqlite3VdbeChangeP5(v, 1); - pParse->nTab = 2; - sqlite3SelectDestInit(&dest, SRT_Table, 1); - sqlite3Select(pParse, pSelect, &dest); - sqlite3VdbeAddOp1(v, OP_Close, 1); - if( pParse->nErr==0 ){ - pSelTab = sqlite3ResultSetOfSelect(pParse, pSelect); - if( pSelTab==0 ) return; - assert( p->aCol==0 ); - p->nCol = pSelTab->nCol; - p->aCol = pSelTab->aCol; - pSelTab->nCol = 0; - pSelTab->aCol = 0; - sqlite3DeleteTable(db, pSelTab); - } - } - - /* Compute the complete text of the CREATE statement */ - if( pSelect ){ - zStmt = createTableStmt(db, p); - }else{ - n = (int)(pEnd->z - pParse->sNameToken.z) + 1; - zStmt = sqlite3MPrintf(db, - "CREATE %s %.*s", zType2, n, pParse->sNameToken.z - ); - } - - /* A slot for the record has already been allocated in the - ** SQLITE_MASTER table. We just need to update that slot with all - ** the information we've collected. - */ - sqlite3NestedParse(pParse, - "UPDATE %Q.%s " - "SET type='%s', name=%Q, tbl_name=%Q, rootpage=#%d, sql=%Q " - "WHERE rowid=#%d", - db->aDb[iDb].zName, SCHEMA_TABLE(iDb), - zType, - p->zName, - p->zName, - pParse->regRoot, - zStmt, - pParse->regRowid - ); - sqlite3DbFree(db, zStmt); - sqlite3ChangeCookie(pParse, iDb); - -#ifndef SQLITE_OMIT_AUTOINCREMENT - /* Check to see if we need to create an sqlite_sequence table for - ** keeping track of autoincrement keys. - */ - if( p->tabFlags & TF_Autoincrement ){ - Db *pDb = &db->aDb[iDb]; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( pDb->pSchema->pSeqTab==0 ){ - sqlite3NestedParse(pParse, - "CREATE TABLE %Q.sqlite_sequence(name,seq)", - pDb->zName - ); - } - } + pIndex = sqlite3FindIndex(db, z, zDb); + sqlite3DbFree(db, z); + if( pIndex ){ + sqlite3BeginWriteOperation(pParse, 0, iDb); + sqlite3RefillIndex(pParse, pIndex, -1); + return; + } + sqlite3ErrorMsg(pParse, "unable to identify the object to be reindexed"); +} #endif - /* Reparse everything to update our internal data structures */ - sqlite3VdbeAddParseSchemaOp(v, iDb, - sqlite3MPrintf(db, "tbl_name='%q'", p->zName)); +/* +** Return a KeyInfo structure that is appropriate for the given Index. +** +** The KeyInfo structure for an index is cached in the Index object. +** So there might be multiple references to the returned pointer. The +** caller should not try to modify the KeyInfo object. +** +** The caller should invoke sqlite3KeyInfoUnref() on the returned object +** when it has finished using it. +*/ +SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoOfIndex(Parse *pParse, Index *pIdx){ + if( pParse->nErr ) return 0; +#ifndef SQLITE_OMIT_SHARED_CACHE + if( pIdx->pKeyInfo && pIdx->pKeyInfo->db!=pParse->db ){ + sqlite3KeyInfoUnref(pIdx->pKeyInfo); + pIdx->pKeyInfo = 0; } - - - /* Add the table to the in-memory representation of the database. - */ - if( db->init.busy ){ - Table *pOld; - Schema *pSchema = p->pSchema; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pOld = sqlite3HashInsert(&pSchema->tblHash, p->zName, - sqlite3Strlen30(p->zName),p); - if( pOld ){ - assert( p==pOld ); /* Malloc must have failed inside HashInsert() */ - db->mallocFailed = 1; - return; +#endif + if( pIdx->pKeyInfo==0 ){ + int i; + int nCol = pIdx->nColumn; + int nKey = pIdx->nKeyCol; + KeyInfo *pKey; + if( pIdx->uniqNotNull ){ + pKey = sqlite3KeyInfoAlloc(pParse->db, nKey, nCol-nKey); + }else{ + pKey = sqlite3KeyInfoAlloc(pParse->db, nCol, 0); } - pParse->pNewTable = 0; - db->nTable++; - db->flags |= SQLITE_InternChanges; - -#ifndef SQLITE_OMIT_ALTERTABLE - if( !p->pSelect ){ - const char *zName = (const char *)pParse->sNameToken.z; - int nName; - assert( !pSelect && pCons && pEnd ); - if( pCons->z==0 ){ - pCons = pEnd; + if( pKey ){ + assert( sqlite3KeyInfoIsWriteable(pKey) ); + for(i=0; iazColl[i]; + assert( zColl!=0 ); + pKey->aColl[i] = strcmp(zColl,"BINARY")==0 ? 0 : + sqlite3LocateCollSeq(pParse, zColl); + pKey->aSortOrder[i] = pIdx->aSortOrder[i]; + } + if( pParse->nErr ){ + sqlite3KeyInfoUnref(pKey); + }else{ + pIdx->pKeyInfo = pKey; } - nName = (int)((const char *)pCons->z - zName); - p->addColOffset = 13 + sqlite3Utf8CharLen(zName, nName); } -#endif } + return sqlite3KeyInfoRef(pIdx->pKeyInfo); } -#ifndef SQLITE_OMIT_VIEW -/* -** The parser calls this routine in order to create a new VIEW +#ifndef SQLITE_OMIT_CTE +/* +** This routine is invoked once per CTE by the parser while parsing a +** WITH clause. */ -SQLITE_PRIVATE void sqlite3CreateView( - Parse *pParse, /* The parsing context */ - Token *pBegin, /* The CREATE token that begins the statement */ - Token *pName1, /* The token that holds the name of the view */ - Token *pName2, /* The token that holds the name of the view */ - Select *pSelect, /* A SELECT statement that will become the new view */ - int isTemp, /* TRUE for a TEMPORARY view */ - int noErr /* Suppress error messages if VIEW already exists */ +SQLITE_PRIVATE With *sqlite3WithAdd( + Parse *pParse, /* Parsing context */ + With *pWith, /* Existing WITH clause, or NULL */ + Token *pName, /* Name of the common-table */ + ExprList *pArglist, /* Optional column name list for the table */ + Select *pQuery /* Query used to initialize the table */ ){ - Table *p; - int n; - const char *z; - Token sEnd; - DbFixer sFix; - Token *pName; - int iDb; sqlite3 *db = pParse->db; + With *pNew; + char *zName; - if( pParse->nVar>0 ){ - sqlite3ErrorMsg(pParse, "parameters are not allowed in views"); - sqlite3SelectDelete(db, pSelect); - return; - } - sqlite3StartTable(pParse, pName1, pName2, isTemp, 1, 0, noErr); - p = pParse->pNewTable; - if( p==0 || pParse->nErr ){ - sqlite3SelectDelete(db, pSelect); - return; - } - sqlite3TwoPartName(pParse, pName1, pName2, &pName); - iDb = sqlite3SchemaToIndex(db, p->pSchema); - if( sqlite3FixInit(&sFix, pParse, iDb, "view", pName) - && sqlite3FixSelect(&sFix, pSelect) - ){ - sqlite3SelectDelete(db, pSelect); - return; + /* Check that the CTE name is unique within this WITH clause. If + ** not, store an error in the Parse structure. */ + zName = sqlite3NameFromToken(pParse->db, pName); + if( zName && pWith ){ + int i; + for(i=0; inCte; i++){ + if( sqlite3StrICmp(zName, pWith->a[i].zName)==0 ){ + sqlite3ErrorMsg(pParse, "duplicate WITH table name: %s", zName); + } + } } - /* Make a copy of the entire SELECT statement that defines the view. - ** This will force all the Expr.token.z values to be dynamically - ** allocated rather than point to the input string - which means that - ** they will persist after the current sqlite3_exec() call returns. - */ - p->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); - sqlite3SelectDelete(db, pSelect); - if( db->mallocFailed ){ - return; - } - if( !db->init.busy ){ - sqlite3ViewGetColumnNames(pParse, p); + if( pWith ){ + int nByte = sizeof(*pWith) + (sizeof(pWith->a[1]) * pWith->nCte); + pNew = sqlite3DbRealloc(db, pWith, nByte); + }else{ + pNew = sqlite3DbMallocZero(db, sizeof(*pWith)); } + assert( zName!=0 || pNew==0 ); + assert( db->mallocFailed==0 || pNew==0 ); - /* Locate the end of the CREATE VIEW statement. Make sEnd point to - ** the end. - */ - sEnd = pParse->sLastToken; - if( ALWAYS(sEnd.z[0]!=0) && sEnd.z[0]!=';' ){ - sEnd.z += sEnd.n; + if( pNew==0 ){ + sqlite3ExprListDelete(db, pArglist); + sqlite3SelectDelete(db, pQuery); + sqlite3DbFree(db, zName); + pNew = pWith; + }else{ + pNew->a[pNew->nCte].pSelect = pQuery; + pNew->a[pNew->nCte].pCols = pArglist; + pNew->a[pNew->nCte].zName = zName; + pNew->a[pNew->nCte].zErr = 0; + pNew->nCte++; } - sEnd.n = 0; - n = (int)(sEnd.z - pBegin->z); - z = pBegin->z; - while( ALWAYS(n>0) && sqlite3Isspace(z[n-1]) ){ n--; } - sEnd.z = &z[n-1]; - sEnd.n = 1; - /* Use sqlite3EndTable() to add the view to the SQLITE_MASTER table */ - sqlite3EndTable(pParse, 0, &sEnd, 0); - return; + return pNew; } -#endif /* SQLITE_OMIT_VIEW */ -#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) /* -** The Table structure pTable is really a VIEW. Fill in the names of -** the columns of the view in the pTable structure. Return the number -** of errors. If an error is seen leave an error message in pParse->zErrMsg. +** Free the contents of the With object passed as the second argument. */ -SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse *pParse, Table *pTable){ - Table *pSelTab; /* A fake table from which we get the result set */ - Select *pSel; /* Copy of the SELECT that implements the view */ - int nErr = 0; /* Number of errors encountered */ - int n; /* Temporarily holds the number of cursors assigned */ - sqlite3 *db = pParse->db; /* Database connection for malloc errors */ - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); - - assert( pTable ); - -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3VtabCallConnect(pParse, pTable) ){ - return SQLITE_ERROR; +SQLITE_PRIVATE void sqlite3WithDelete(sqlite3 *db, With *pWith){ + if( pWith ){ + int i; + for(i=0; inCte; i++){ + struct Cte *pCte = &pWith->a[i]; + sqlite3ExprListDelete(db, pCte->pCols); + sqlite3SelectDelete(db, pCte->pSelect); + sqlite3DbFree(db, pCte->zName); + } + sqlite3DbFree(db, pWith); } - if( IsVirtual(pTable) ) return 0; -#endif +} +#endif /* !defined(SQLITE_OMIT_CTE) */ -#ifndef SQLITE_OMIT_VIEW - /* A positive nCol means the columns names for this view are - ** already known. - */ - if( pTable->nCol>0 ) return 0; +/************** End of build.c ***********************************************/ +/************** Begin file callback.c ****************************************/ +/* +** 2005 May 23 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains functions used to access the internal hash tables +** of user defined functions and collation sequences. +*/ - /* A negative nCol is a special marker meaning that we are currently - ** trying to compute the column names. If we enter this routine with - ** a negative nCol, it means two or more views form a loop, like this: - ** - ** CREATE VIEW one AS SELECT * FROM two; - ** CREATE VIEW two AS SELECT * FROM one; - ** - ** Actually, the error above is now caught prior to reaching this point. - ** But the following test is still important as it does come up - ** in the following: - ** - ** CREATE TABLE main.ex1(a); - ** CREATE TEMP VIEW ex1 AS SELECT a FROM ex1; - ** SELECT * FROM temp.ex1; - */ - if( pTable->nCol<0 ){ - sqlite3ErrorMsg(pParse, "view %s is circularly defined", pTable->zName); - return 1; - } - assert( pTable->nCol>=0 ); - /* If we get this far, it means we need to compute the table names. - ** Note that the call to sqlite3ResultSetOfSelect() will expand any - ** "*" elements in the results set of the view and will assign cursors - ** to the elements of the FROM clause. But we do not want these changes - ** to be permanent. So the computation is done on a copy of the SELECT - ** statement that defines the view. - */ - assert( pTable->pSelect ); - pSel = sqlite3SelectDup(db, pTable->pSelect, 0); - if( pSel ){ - u8 enableLookaside = db->lookaside.bEnabled; - n = pParse->nTab; - sqlite3SrcListAssignCursors(pParse, pSel->pSrc); - pTable->nCol = -1; - db->lookaside.bEnabled = 0; -#ifndef SQLITE_OMIT_AUTHORIZATION - xAuth = db->xAuth; - db->xAuth = 0; - pSelTab = sqlite3ResultSetOfSelect(pParse, pSel); - db->xAuth = xAuth; -#else - pSelTab = sqlite3ResultSetOfSelect(pParse, pSel); -#endif - db->lookaside.bEnabled = enableLookaside; - pParse->nTab = n; - if( pSelTab ){ - assert( pTable->aCol==0 ); - pTable->nCol = pSelTab->nCol; - pTable->aCol = pSelTab->aCol; - pSelTab->nCol = 0; - pSelTab->aCol = 0; - sqlite3DeleteTable(db, pSelTab); - assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) ); - pTable->pSchema->flags |= DB_UnresetViews; - }else{ - pTable->nCol = 0; - nErr++; +/* +** Invoke the 'collation needed' callback to request a collation sequence +** in the encoding enc of name zName, length nName. +*/ +static void callCollNeeded(sqlite3 *db, int enc, const char *zName){ + assert( !db->xCollNeeded || !db->xCollNeeded16 ); + if( db->xCollNeeded ){ + char *zExternal = sqlite3DbStrDup(db, zName); + if( !zExternal ) return; + db->xCollNeeded(db->pCollNeededArg, db, enc, zExternal); + sqlite3DbFree(db, zExternal); + } +#ifndef SQLITE_OMIT_UTF16 + if( db->xCollNeeded16 ){ + char const *zExternal; + sqlite3_value *pTmp = sqlite3ValueNew(db); + sqlite3ValueSetStr(pTmp, -1, zName, SQLITE_UTF8, SQLITE_STATIC); + zExternal = sqlite3ValueText(pTmp, SQLITE_UTF16NATIVE); + if( zExternal ){ + db->xCollNeeded16(db->pCollNeededArg, db, (int)ENC(db), zExternal); } - sqlite3SelectDelete(db, pSel); - } else { - nErr++; + sqlite3ValueFree(pTmp); } -#endif /* SQLITE_OMIT_VIEW */ - return nErr; +#endif } -#endif /* !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) */ -#ifndef SQLITE_OMIT_VIEW /* -** Clear the column names from every VIEW in database idx. +** This routine is called if the collation factory fails to deliver a +** collation function in the best encoding but there may be other versions +** of this collation function (for other text encodings) available. Use one +** of these instead if they exist. Avoid a UTF-8 <-> UTF-16 conversion if +** possible. */ -static void sqliteViewResetAll(sqlite3 *db, int idx){ - HashElem *i; - assert( sqlite3SchemaMutexHeld(db, idx, 0) ); - if( !DbHasProperty(db, idx, DB_UnresetViews) ) return; - for(i=sqliteHashFirst(&db->aDb[idx].pSchema->tblHash); i;i=sqliteHashNext(i)){ - Table *pTab = sqliteHashData(i); - if( pTab->pSelect ){ - sqliteDeleteColumnNames(db, pTab); - pTab->aCol = 0; - pTab->nCol = 0; +static int synthCollSeq(sqlite3 *db, CollSeq *pColl){ + CollSeq *pColl2; + char *z = pColl->zName; + int i; + static const u8 aEnc[] = { SQLITE_UTF16BE, SQLITE_UTF16LE, SQLITE_UTF8 }; + for(i=0; i<3; i++){ + pColl2 = sqlite3FindCollSeq(db, aEnc[i], z, 0); + if( pColl2->xCmp!=0 ){ + memcpy(pColl, pColl2, sizeof(CollSeq)); + pColl->xDel = 0; /* Do not copy the destructor */ + return SQLITE_OK; } } - DbClearProperty(db, idx, DB_UnresetViews); + return SQLITE_ERROR; } -#else -# define sqliteViewResetAll(A,B) -#endif /* SQLITE_OMIT_VIEW */ /* -** This function is called by the VDBE to adjust the internal schema -** used by SQLite when the btree layer moves a table root page. The -** root-page of a table or index in database iDb has changed from iFrom -** to iTo. +** This function is responsible for invoking the collation factory callback +** or substituting a collation sequence of a different encoding when the +** requested collation sequence is not available in the desired encoding. +** +** If it is not NULL, then pColl must point to the database native encoding +** collation sequence with name zName, length nName. ** -** Ticket #1728: The symbol table might still contain information -** on tables and/or indices that are the process of being deleted. -** If you are unlucky, one of those deleted indices or tables might -** have the same rootpage number as the real table or index that is -** being moved. So we cannot stop searching after the first match -** because the first match might be for one of the deleted indices -** or tables and not the table/index that is actually being moved. -** We must continue looping until all tables and indices with -** rootpage==iFrom have been converted to have a rootpage of iTo -** in order to be certain that we got the right one. +** The return value is either the collation sequence to be used in database +** db for collation type name zName, length nName, or NULL, if no collation +** sequence can be found. If no collation is found, leave an error message. +** +** See also: sqlite3LocateCollSeq(), sqlite3FindCollSeq() */ -#ifndef SQLITE_OMIT_AUTOVACUUM -SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3 *db, int iDb, int iFrom, int iTo){ - HashElem *pElem; - Hash *pHash; - Db *pDb; +SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq( + Parse *pParse, /* Parsing context */ + u8 enc, /* The desired encoding for the collating sequence */ + CollSeq *pColl, /* Collating sequence with native encoding, or NULL */ + const char *zName /* Collating sequence name */ +){ + CollSeq *p; + sqlite3 *db = pParse->db; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pDb = &db->aDb[iDb]; - pHash = &pDb->pSchema->tblHash; - for(pElem=sqliteHashFirst(pHash); pElem; pElem=sqliteHashNext(pElem)){ - Table *pTab = sqliteHashData(pElem); - if( pTab->tnum==iFrom ){ - pTab->tnum = iTo; - } + p = pColl; + if( !p ){ + p = sqlite3FindCollSeq(db, enc, zName, 0); } - pHash = &pDb->pSchema->idxHash; - for(pElem=sqliteHashFirst(pHash); pElem; pElem=sqliteHashNext(pElem)){ - Index *pIdx = sqliteHashData(pElem); - if( pIdx->tnum==iFrom ){ - pIdx->tnum = iTo; - } + if( !p || !p->xCmp ){ + /* No collation sequence of this type for this encoding is registered. + ** Call the collation factory to see if it can supply us with one. + */ + callCollNeeded(db, enc, zName); + p = sqlite3FindCollSeq(db, enc, zName, 0); } -} -#endif - -/* -** Write code to erase the table with root-page iTable from database iDb. -** Also write code to modify the sqlite_master table and internal schema -** if a root-page of another table is moved by the btree-layer whilst -** erasing iTable (this can happen with an auto-vacuum database). -*/ -static void destroyRootPage(Parse *pParse, int iTable, int iDb){ - Vdbe *v = sqlite3GetVdbe(pParse); - int r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_Destroy, iTable, r1, iDb); - sqlite3MayAbort(pParse); -#ifndef SQLITE_OMIT_AUTOVACUUM - /* OP_Destroy stores an in integer r1. If this integer - ** is non-zero, then it is the root page number of a table moved to - ** location iTable. The following code modifies the sqlite_master table to - ** reflect this. - ** - ** The "#NNN" in the SQL is a special constant that means whatever value - ** is in register NNN. See grammar rules associated with the TK_REGISTER - ** token for additional information. - */ - sqlite3NestedParse(pParse, - "UPDATE %Q.%s SET rootpage=%d WHERE #%d AND rootpage=#%d", - pParse->db->aDb[iDb].zName, SCHEMA_TABLE(iDb), iTable, r1, r1); -#endif - sqlite3ReleaseTempReg(pParse, r1); + if( p && !p->xCmp && synthCollSeq(db, p) ){ + p = 0; + } + assert( !p || p->xCmp ); + if( p==0 ){ + sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName); + } + return p; } /* -** Write VDBE code to erase table pTab and all associated indices on disk. -** Code to update the sqlite_master tables and internal schema definitions -** in case a root-page belonging to another table is moved by the btree layer -** is also added (this can happen with an auto-vacuum database). +** This routine is called on a collation sequence before it is used to +** check that it is defined. An undefined collation sequence exists when +** a database is loaded that contains references to collation sequences +** that have not been defined by sqlite3_create_collation() etc. +** +** If required, this routine calls the 'collation needed' callback to +** request a definition of the collating sequence. If this doesn't work, +** an equivalent collating sequence that uses a text encoding different +** from the main database is substituted, if one is available. */ -static void destroyTable(Parse *pParse, Table *pTab){ -#ifdef SQLITE_OMIT_AUTOVACUUM - Index *pIdx; - int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - destroyRootPage(pParse, pTab->tnum, iDb); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - destroyRootPage(pParse, pIdx->tnum, iDb); - } -#else - /* If the database may be auto-vacuum capable (if SQLITE_OMIT_AUTOVACUUM - ** is not defined), then it is important to call OP_Destroy on the - ** table and index root-pages in order, starting with the numerically - ** largest root-page number. This guarantees that none of the root-pages - ** to be destroyed is relocated by an earlier OP_Destroy. i.e. if the - ** following were coded: - ** - ** OP_Destroy 4 0 - ** ... - ** OP_Destroy 5 0 - ** - ** and root page 5 happened to be the largest root-page number in the - ** database, then root page 5 would be moved to page 4 by the - ** "OP_Destroy 4 0" opcode. The subsequent "OP_Destroy 5 0" would hit - ** a free-list page. - */ - int iTab = pTab->tnum; - int iDestroyed = 0; - - while( 1 ){ - Index *pIdx; - int iLargest = 0; - - if( iDestroyed==0 || iTabpIndex; pIdx; pIdx=pIdx->pNext){ - int iIdx = pIdx->tnum; - assert( pIdx->pSchema==pTab->pSchema ); - if( (iDestroyed==0 || (iIdxiLargest ){ - iLargest = iIdx; - } - } - if( iLargest==0 ){ - return; - }else{ - int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - destroyRootPage(pParse, iLargest, iDb); - iDestroyed = iLargest; +SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *pParse, CollSeq *pColl){ + if( pColl ){ + const char *zName = pColl->zName; + sqlite3 *db = pParse->db; + CollSeq *p = sqlite3GetCollSeq(pParse, ENC(db), pColl, zName); + if( !p ){ + return SQLITE_ERROR; } + assert( p==pColl ); } -#endif + return SQLITE_OK; } + + /* -** This routine is called to do the work of a DROP TABLE statement. -** pName is the name of the table to be dropped. +** Locate and return an entry from the db.aCollSeq hash table. If the entry +** specified by zName and nName is not found and parameter 'create' is +** true, then create a new entry. Otherwise return NULL. +** +** Each pointer stored in the sqlite3.aCollSeq hash table contains an +** array of three CollSeq structures. The first is the collation sequence +** preferred for UTF-8, the second UTF-16le, and the third UTF-16be. +** +** Stored immediately after the three collation sequences is a copy of +** the collation sequence name. A pointer to this string is stored in +** each collation sequence structure. */ -SQLITE_PRIVATE void sqlite3DropTable(Parse *pParse, SrcList *pName, int isView, int noErr){ - Table *pTab; - Vdbe *v; - sqlite3 *db = pParse->db; - int iDb; - - if( db->mallocFailed ){ - goto exit_drop_table; - } - assert( pParse->nErr==0 ); - assert( pName->nSrc==1 ); - if( noErr ) db->suppressErr++; - pTab = sqlite3LocateTable(pParse, isView, - pName->a[0].zName, pName->a[0].zDatabase); - if( noErr ) db->suppressErr--; +static CollSeq *findCollSeqEntry( + sqlite3 *db, /* Database connection */ + const char *zName, /* Name of the collating sequence */ + int create /* Create a new entry if true */ +){ + CollSeq *pColl; + pColl = sqlite3HashFind(&db->aCollSeq, zName); - if( pTab==0 ){ - if( noErr ) sqlite3CodeVerifyNamedSchema(pParse, pName->a[0].zDatabase); - goto exit_drop_table; - } - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - assert( iDb>=0 && iDbnDb ); + if( 0==pColl && create ){ + int nName = sqlite3Strlen30(zName); + pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1); + if( pColl ){ + CollSeq *pDel = 0; + pColl[0].zName = (char*)&pColl[3]; + pColl[0].enc = SQLITE_UTF8; + pColl[1].zName = (char*)&pColl[3]; + pColl[1].enc = SQLITE_UTF16LE; + pColl[2].zName = (char*)&pColl[3]; + pColl[2].enc = SQLITE_UTF16BE; + memcpy(pColl[0].zName, zName, nName); + pColl[0].zName[nName] = 0; + pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, pColl); - /* If pTab is a virtual table, call ViewGetColumnNames() to ensure - ** it is initialized. - */ - if( IsVirtual(pTab) && sqlite3ViewGetColumnNames(pParse, pTab) ){ - goto exit_drop_table; - } -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int code; - const char *zTab = SCHEMA_TABLE(iDb); - const char *zDb = db->aDb[iDb].zName; - const char *zArg2 = 0; - if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb)){ - goto exit_drop_table; - } - if( isView ){ - if( !OMIT_TEMPDB && iDb==1 ){ - code = SQLITE_DROP_TEMP_VIEW; - }else{ - code = SQLITE_DROP_VIEW; - } -#ifndef SQLITE_OMIT_VIRTUALTABLE - }else if( IsVirtual(pTab) ){ - code = SQLITE_DROP_VTABLE; - zArg2 = sqlite3GetVTable(db, pTab)->pMod->zName; -#endif - }else{ - if( !OMIT_TEMPDB && iDb==1 ){ - code = SQLITE_DROP_TEMP_TABLE; - }else{ - code = SQLITE_DROP_TABLE; + /* If a malloc() failure occurred in sqlite3HashInsert(), it will + ** return the pColl pointer to be deleted (because it wasn't added + ** to the hash table). + */ + assert( pDel==0 || pDel==pColl ); + if( pDel!=0 ){ + db->mallocFailed = 1; + sqlite3DbFree(db, pDel); + pColl = 0; } } - if( sqlite3AuthCheck(pParse, code, pTab->zName, zArg2, zDb) ){ - goto exit_drop_table; - } - if( sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb) ){ - goto exit_drop_table; - } } -#endif - if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 ){ - sqlite3ErrorMsg(pParse, "table %s may not be dropped", pTab->zName); - goto exit_drop_table; + return pColl; +} + +/* +** Parameter zName points to a UTF-8 encoded string nName bytes long. +** Return the CollSeq* pointer for the collation sequence named zName +** for the encoding 'enc' from the database 'db'. +** +** If the entry specified is not found and 'create' is true, then create a +** new entry. Otherwise return NULL. +** +** A separate function sqlite3LocateCollSeq() is a wrapper around +** this routine. sqlite3LocateCollSeq() invokes the collation factory +** if necessary and generates an error message if the collating sequence +** cannot be found. +** +** See also: sqlite3LocateCollSeq(), sqlite3GetCollSeq() +*/ +SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq( + sqlite3 *db, + u8 enc, + const char *zName, + int create +){ + CollSeq *pColl; + if( zName ){ + pColl = findCollSeqEntry(db, zName, create); + }else{ + pColl = db->pDfltColl; } + assert( SQLITE_UTF8==1 && SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 ); + assert( enc>=SQLITE_UTF8 && enc<=SQLITE_UTF16BE ); + if( pColl ) pColl += enc-1; + return pColl; +} -#ifndef SQLITE_OMIT_VIEW - /* Ensure DROP TABLE is not used on a view, and DROP VIEW is not used - ** on a table. - */ - if( isView && pTab->pSelect==0 ){ - sqlite3ErrorMsg(pParse, "use DROP TABLE to delete table %s", pTab->zName); - goto exit_drop_table; +/* During the search for the best function definition, this procedure +** is called to test how well the function passed as the first argument +** matches the request for a function with nArg arguments in a system +** that uses encoding enc. The value returned indicates how well the +** request is matched. A higher value indicates a better match. +** +** If nArg is -1 that means to only return a match (non-zero) if p->nArg +** is also -1. In other words, we are searching for a function that +** takes a variable number of arguments. +** +** If nArg is -2 that means that we are searching for any function +** regardless of the number of arguments it uses, so return a positive +** match score for any +** +** The returned value is always between 0 and 6, as follows: +** +** 0: Not a match. +** 1: UTF8/16 conversion required and function takes any number of arguments. +** 2: UTF16 byte order change required and function takes any number of args. +** 3: encoding matches and function takes any number of arguments +** 4: UTF8/16 conversion required - argument count matches exactly +** 5: UTF16 byte order conversion required - argument count matches exactly +** 6: Perfect match: encoding and argument count match exactly. +** +** If nArg==(-2) then any function with a non-null xStep or xFunc is +** a perfect match and any function with both xStep and xFunc NULL is +** a non-match. +*/ +#define FUNC_PERFECT_MATCH 6 /* The score for a perfect match */ +static int matchQuality( + FuncDef *p, /* The function we are evaluating for match quality */ + int nArg, /* Desired number of arguments. (-1)==any */ + u8 enc /* Desired text encoding */ +){ + int match; + + /* nArg of -2 is a special case */ + if( nArg==(-2) ) return (p->xFunc==0 && p->xStep==0) ? 0 : FUNC_PERFECT_MATCH; + + /* Wrong number of arguments means "no match" */ + if( p->nArg!=nArg && p->nArg>=0 ) return 0; + + /* Give a better score to a function with a specific number of arguments + ** than to function that accepts any number of arguments. */ + if( p->nArg==nArg ){ + match = 4; + }else{ + match = 1; } - if( !isView && pTab->pSelect ){ - sqlite3ErrorMsg(pParse, "use DROP VIEW to delete view %s", pTab->zName); - goto exit_drop_table; + + /* Bonus points if the text encoding matches */ + if( enc==(p->funcFlags & SQLITE_FUNC_ENCMASK) ){ + match += 2; /* Exact encoding match */ + }else if( (enc & p->funcFlags & 2)!=0 ){ + match += 1; /* Both are UTF16, but with different byte orders */ } -#endif - /* Generate code to remove the table from the master table - ** on disk. - */ - v = sqlite3GetVdbe(pParse); - if( v ){ - Trigger *pTrigger; - Db *pDb = &db->aDb[iDb]; - sqlite3BeginWriteOperation(pParse, 1, iDb); + return match; +} -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTab) ){ - sqlite3VdbeAddOp0(v, OP_VBegin); +/* +** Search a FuncDefHash for a function with the given name. Return +** a pointer to the matching FuncDef if found, or 0 if there is no match. +*/ +static FuncDef *functionSearch( + FuncDefHash *pHash, /* Hash table to search */ + int h, /* Hash of the name */ + const char *zFunc, /* Name of function */ + int nFunc /* Number of bytes in zFunc */ +){ + FuncDef *p; + for(p=pHash->a[h]; p; p=p->pHash){ + if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 && p->zName[nFunc]==0 ){ + return p; } -#endif - sqlite3FkDropTable(pParse, pName, pTab); + } + return 0; +} - /* Drop all triggers associated with the table being dropped. Code - ** is generated to remove entries from sqlite_master and/or - ** sqlite_temp_master if required. - */ - pTrigger = sqlite3TriggerList(pParse, pTab); - while( pTrigger ){ - assert( pTrigger->pSchema==pTab->pSchema || - pTrigger->pSchema==db->aDb[1].pSchema ); - sqlite3DropTriggerPtr(pParse, pTrigger); - pTrigger = pTrigger->pNext; - } +/* +** Insert a new FuncDef into a FuncDefHash hash table. +*/ +SQLITE_PRIVATE void sqlite3FuncDefInsert( + FuncDefHash *pHash, /* The hash table into which to insert */ + FuncDef *pDef /* The function definition to insert */ +){ + FuncDef *pOther; + int nName = sqlite3Strlen30(pDef->zName); + u8 c1 = (u8)pDef->zName[0]; + int h = (sqlite3UpperToLower[c1] + nName) % ArraySize(pHash->a); + pOther = functionSearch(pHash, h, pDef->zName, nName); + if( pOther ){ + assert( pOther!=pDef && pOther->pNext!=pDef ); + pDef->pNext = pOther->pNext; + pOther->pNext = pDef; + }else{ + pDef->pNext = 0; + pDef->pHash = pHash->a[h]; + pHash->a[h] = pDef; + } +} + + -#ifndef SQLITE_OMIT_AUTOINCREMENT - /* Remove any entries of the sqlite_sequence table associated with - ** the table being dropped. This is done before the table is dropped - ** at the btree level, in case the sqlite_sequence table needs to - ** move as a result of the drop (can happen in auto-vacuum mode). - */ - if( pTab->tabFlags & TF_Autoincrement ){ - sqlite3NestedParse(pParse, - "DELETE FROM %s.sqlite_sequence WHERE name=%Q", - pDb->zName, pTab->zName - ); - } -#endif +/* +** Locate a user function given a name, a number of arguments and a flag +** indicating whether the function prefers UTF-16 over UTF-8. Return a +** pointer to the FuncDef structure that defines that function, or return +** NULL if the function does not exist. +** +** If the createFlag argument is true, then a new (blank) FuncDef +** structure is created and liked into the "db" structure if a +** no matching function previously existed. +** +** If nArg is -2, then the first valid function found is returned. A +** function is valid if either xFunc or xStep is non-zero. The nArg==(-2) +** case is used to see if zName is a valid function name for some number +** of arguments. If nArg is -2, then createFlag must be 0. +** +** If createFlag is false, then a function with the required name and +** number of arguments may be returned even if the eTextRep flag does not +** match that requested. +*/ +SQLITE_PRIVATE FuncDef *sqlite3FindFunction( + sqlite3 *db, /* An open database */ + const char *zName, /* Name of the function. Not null-terminated */ + int nName, /* Number of characters in the name */ + int nArg, /* Number of arguments. -1 means any number */ + u8 enc, /* Preferred text encoding */ + u8 createFlag /* Create new entry if true and does not otherwise exist */ +){ + FuncDef *p; /* Iterator variable */ + FuncDef *pBest = 0; /* Best match found so far */ + int bestScore = 0; /* Score of best match */ + int h; /* Hash value */ - /* Drop all SQLITE_MASTER table and index entries that refer to the - ** table. The program name loops through the master table and deletes - ** every row that refers to a table of the same name as the one being - ** dropped. Triggers are handled seperately because a trigger can be - ** created in the temp database that refers to a table in another - ** database. - */ - sqlite3NestedParse(pParse, - "DELETE FROM %Q.%s WHERE tbl_name=%Q and type!='trigger'", - pDb->zName, SCHEMA_TABLE(iDb), pTab->zName); + assert( nArg>=(-2) ); + assert( nArg>=(-1) || createFlag==0 ); + h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % ArraySize(db->aFunc.a); - /* Drop any statistics from the sqlite_stat1 table, if it exists */ - if( sqlite3FindTable(db, "sqlite_stat1", db->aDb[iDb].zName) ){ - sqlite3NestedParse(pParse, - "DELETE FROM %Q.sqlite_stat1 WHERE tbl=%Q", pDb->zName, pTab->zName - ); + /* First search for a match amongst the application-defined functions. + */ + p = functionSearch(&db->aFunc, h, zName, nName); + while( p ){ + int score = matchQuality(p, nArg, enc); + if( score>bestScore ){ + pBest = p; + bestScore = score; } + p = p->pNext; + } - if( !isView && !IsVirtual(pTab) ){ - destroyTable(pParse, pTab); + /* If no match is found, search the built-in functions. + ** + ** If the SQLITE_PreferBuiltin flag is set, then search the built-in + ** functions even if a prior app-defined function was found. And give + ** priority to built-in functions. + ** + ** Except, if createFlag is true, that means that we are trying to + ** install a new function. Whatever FuncDef structure is returned it will + ** have fields overwritten with new information appropriate for the + ** new function. But the FuncDefs for built-in functions are read-only. + ** So we must not search for built-ins when creating a new function. + */ + if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){ + FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); + bestScore = 0; + p = functionSearch(pHash, h, zName, nName); + while( p ){ + int score = matchQuality(p, nArg, enc); + if( score>bestScore ){ + pBest = p; + bestScore = score; + } + p = p->pNext; } + } - /* Remove the table entry from SQLite's internal schema and modify - ** the schema cookie. - */ - if( IsVirtual(pTab) ){ - sqlite3VdbeAddOp4(v, OP_VDestroy, iDb, 0, 0, pTab->zName, 0); - } - sqlite3VdbeAddOp4(v, OP_DropTable, iDb, 0, 0, pTab->zName, 0); - sqlite3ChangeCookie(pParse, iDb); + /* If the createFlag parameter is true and the search did not reveal an + ** exact match for the name, number of arguments and encoding, then add a + ** new entry to the hash table and return it. + */ + if( createFlag && bestScorezName = (char *)&pBest[1]; + pBest->nArg = (u16)nArg; + pBest->funcFlags = enc; + memcpy(pBest->zName, zName, nName); + pBest->zName[nName] = 0; + sqlite3FuncDefInsert(&db->aFunc, pBest); } - sqliteViewResetAll(db, iDb); -exit_drop_table: - sqlite3SrcListDelete(db, pName); + if( pBest && (pBest->xStep || pBest->xFunc || createFlag) ){ + return pBest; + } + return 0; } /* -** This routine is called to create a new foreign key on the table -** currently under construction. pFromCol determines which columns -** in the current table point to the foreign key. If pFromCol==0 then -** connect the key to the last column inserted. pTo is the name of -** the table referred to. pToCol is a list of tables in the other -** pTo table that the foreign key points to. flags contains all -** information about the conflict resolution algorithms specified -** in the ON DELETE, ON UPDATE and ON INSERT clauses. -** -** An FKey structure is created and added to the table currently -** under construction in the pParse->pNewTable field. +** Free all resources held by the schema structure. The void* argument points +** at a Schema struct. This function does not call sqlite3DbFree(db, ) on the +** pointer itself, it just cleans up subsidiary resources (i.e. the contents +** of the schema hash tables). ** -** The foreign key is set for IMMEDIATE processing. A subsequent call -** to sqlite3DeferForeignKey() might change this to DEFERRED. +** The Schema.cache_size variable is not cleared. */ -SQLITE_PRIVATE void sqlite3CreateForeignKey( - Parse *pParse, /* Parsing context */ - ExprList *pFromCol, /* Columns in this table that point to other table */ - Token *pTo, /* Name of the other table */ - ExprList *pToCol, /* Columns in the other table */ - int flags /* Conflict resolution algorithms. */ -){ - sqlite3 *db = pParse->db; -#ifndef SQLITE_OMIT_FOREIGN_KEY - FKey *pFKey = 0; - FKey *pNextTo; - Table *p = pParse->pNewTable; - int nByte; - int i; - int nCol; - char *z; +SQLITE_PRIVATE void sqlite3SchemaClear(void *p){ + Hash temp1; + Hash temp2; + HashElem *pElem; + Schema *pSchema = (Schema *)p; - assert( pTo!=0 ); - if( p==0 || IN_DECLARE_VTAB ) goto fk_end; - if( pFromCol==0 ){ - int iCol = p->nCol-1; - if( NEVER(iCol<0) ) goto fk_end; - if( pToCol && pToCol->nExpr!=1 ){ - sqlite3ErrorMsg(pParse, "foreign key on %s" - " should reference only one column of table %T", - p->aCol[iCol].zName, pTo); - goto fk_end; - } - nCol = 1; - }else if( pToCol && pToCol->nExpr!=pFromCol->nExpr ){ - sqlite3ErrorMsg(pParse, - "number of columns in foreign key does not match the number of " - "columns in the referenced table"); - goto fk_end; - }else{ - nCol = pFromCol->nExpr; + temp1 = pSchema->tblHash; + temp2 = pSchema->trigHash; + sqlite3HashInit(&pSchema->trigHash); + sqlite3HashClear(&pSchema->idxHash); + for(pElem=sqliteHashFirst(&temp2); pElem; pElem=sqliteHashNext(pElem)){ + sqlite3DeleteTrigger(0, (Trigger*)sqliteHashData(pElem)); } - nByte = sizeof(*pFKey) + (nCol-1)*sizeof(pFKey->aCol[0]) + pTo->n + 1; - if( pToCol ){ - for(i=0; inExpr; i++){ - nByte += sqlite3Strlen30(pToCol->a[i].zName) + 1; - } + sqlite3HashClear(&temp2); + sqlite3HashInit(&pSchema->tblHash); + for(pElem=sqliteHashFirst(&temp1); pElem; pElem=sqliteHashNext(pElem)){ + Table *pTab = sqliteHashData(pElem); + sqlite3DeleteTable(0, pTab); } - pFKey = sqlite3DbMallocZero(db, nByte ); - if( pFKey==0 ){ - goto fk_end; + sqlite3HashClear(&temp1); + sqlite3HashClear(&pSchema->fkeyHash); + pSchema->pSeqTab = 0; + if( pSchema->schemaFlags & DB_SchemaLoaded ){ + pSchema->iGeneration++; + pSchema->schemaFlags &= ~DB_SchemaLoaded; } - pFKey->pFrom = p; - pFKey->pNextFrom = p->pFKey; - z = (char*)&pFKey->aCol[nCol]; - pFKey->zTo = z; - memcpy(z, pTo->z, pTo->n); - z[pTo->n] = 0; - sqlite3Dequote(z); - z += pTo->n+1; - pFKey->nCol = nCol; - if( pFromCol==0 ){ - pFKey->aCol[0].iFrom = p->nCol-1; +} + +/* +** Find and return the schema associated with a BTree. Create +** a new one if necessary. +*/ +SQLITE_PRIVATE Schema *sqlite3SchemaGet(sqlite3 *db, Btree *pBt){ + Schema * p; + if( pBt ){ + p = (Schema *)sqlite3BtreeSchema(pBt, sizeof(Schema), sqlite3SchemaClear); }else{ - for(i=0; inCol; j++){ - if( sqlite3StrICmp(p->aCol[j].zName, pFromCol->a[i].zName)==0 ){ - pFKey->aCol[i].iFrom = j; - break; - } - } - if( j>=p->nCol ){ - sqlite3ErrorMsg(pParse, - "unknown column \"%s\" in foreign key definition", - pFromCol->a[i].zName); - goto fk_end; - } - } + p = (Schema *)sqlite3DbMallocZero(0, sizeof(Schema)); } - if( pToCol ){ - for(i=0; ia[i].zName); - pFKey->aCol[i].zCol = z; - memcpy(z, pToCol->a[i].zName, n); - z[n] = 0; - z += n+1; - } + if( !p ){ + db->mallocFailed = 1; + }else if ( 0==p->file_format ){ + sqlite3HashInit(&p->tblHash); + sqlite3HashInit(&p->idxHash); + sqlite3HashInit(&p->trigHash); + sqlite3HashInit(&p->fkeyHash); + p->enc = SQLITE_UTF8; } - pFKey->isDeferred = 0; - pFKey->aAction[0] = (u8)(flags & 0xff); /* ON DELETE action */ - pFKey->aAction[1] = (u8)((flags >> 8 ) & 0xff); /* ON UPDATE action */ + return p; +} - assert( sqlite3SchemaMutexHeld(db, 0, p->pSchema) ); - pNextTo = (FKey *)sqlite3HashInsert(&p->pSchema->fkeyHash, - pFKey->zTo, sqlite3Strlen30(pFKey->zTo), (void *)pFKey - ); - if( pNextTo==pFKey ){ - db->mallocFailed = 1; - goto fk_end; +/************** End of callback.c ********************************************/ +/************** Begin file delete.c ******************************************/ +/* +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains C code routines that are called by the parser +** in order to generate code for DELETE FROM statements. +*/ + +/* +** While a SrcList can in general represent multiple tables and subqueries +** (as in the FROM clause of a SELECT statement) in this case it contains +** the name of a single table, as one might find in an INSERT, DELETE, +** or UPDATE statement. Look up that table in the symbol table and +** return a pointer. Set an error message and return NULL if the table +** name is not found or if any other error occurs. +** +** The following fields are initialized appropriate in pSrc: +** +** pSrc->a[0].pTab Pointer to the Table object +** pSrc->a[0].pIndex Pointer to the INDEXED BY index, if there is one +** +*/ +SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse *pParse, SrcList *pSrc){ + struct SrcList_item *pItem = pSrc->a; + Table *pTab; + assert( pItem && pSrc->nSrc==1 ); + pTab = sqlite3LocateTableItem(pParse, 0, pItem); + sqlite3DeleteTable(pParse->db, pItem->pTab); + pItem->pTab = pTab; + if( pTab ){ + pTab->nRef++; } - if( pNextTo ){ - assert( pNextTo->pPrevTo==0 ); - pFKey->pNextTo = pNextTo; - pNextTo->pPrevTo = pFKey; + if( sqlite3IndexedByLookup(pParse, pItem) ){ + pTab = 0; } + return pTab; +} - /* Link the foreign key to the table as the last step. +/* +** Check to make sure the given table is writable. If it is not +** writable, generate an error message and return 1. If it is +** writable return 0; +*/ +SQLITE_PRIVATE int sqlite3IsReadOnly(Parse *pParse, Table *pTab, int viewOk){ + /* A table is not writable under the following circumstances: + ** + ** 1) It is a virtual table and no implementation of the xUpdate method + ** has been provided, or + ** 2) It is a system table (i.e. sqlite_master), this call is not + ** part of a nested parse and writable_schema pragma has not + ** been specified. + ** + ** In either case leave an error message in pParse and return non-zero. */ - p->pFKey = pFKey; - pFKey = 0; + if( ( IsVirtual(pTab) + && sqlite3GetVTable(pParse->db, pTab)->pMod->pModule->xUpdate==0 ) + || ( (pTab->tabFlags & TF_Readonly)!=0 + && (pParse->db->flags & SQLITE_WriteSchema)==0 + && pParse->nested==0 ) + ){ + sqlite3ErrorMsg(pParse, "table %s may not be modified", pTab->zName); + return 1; + } -fk_end: - sqlite3DbFree(db, pFKey); -#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */ - sqlite3ExprListDelete(db, pFromCol); - sqlite3ExprListDelete(db, pToCol); +#ifndef SQLITE_OMIT_VIEW + if( !viewOk && pTab->pSelect ){ + sqlite3ErrorMsg(pParse,"cannot modify %s because it is a view",pTab->zName); + return 1; + } +#endif + return 0; } + +#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) /* -** This routine is called when an INITIALLY IMMEDIATE or INITIALLY DEFERRED -** clause is seen as part of a foreign key definition. The isDeferred -** parameter is 1 for INITIALLY DEFERRED and 0 for INITIALLY IMMEDIATE. -** The behavior of the most recently created foreign key is adjusted -** accordingly. +** Evaluate a view and store its result in an ephemeral table. The +** pWhere argument is an optional WHERE clause that restricts the +** set of rows in the view that are to be added to the ephemeral table. */ -SQLITE_PRIVATE void sqlite3DeferForeignKey(Parse *pParse, int isDeferred){ -#ifndef SQLITE_OMIT_FOREIGN_KEY - Table *pTab; - FKey *pFKey; - if( (pTab = pParse->pNewTable)==0 || (pFKey = pTab->pFKey)==0 ) return; - assert( isDeferred==0 || isDeferred==1 ); /* EV: R-30323-21917 */ - pFKey->isDeferred = (u8)isDeferred; -#endif +SQLITE_PRIVATE void sqlite3MaterializeView( + Parse *pParse, /* Parsing context */ + Table *pView, /* View definition */ + Expr *pWhere, /* Optional WHERE clause to be added */ + int iCur /* Cursor number for ephemeral table */ +){ + SelectDest dest; + Select *pSel; + SrcList *pFrom; + sqlite3 *db = pParse->db; + int iDb = sqlite3SchemaToIndex(db, pView->pSchema); + pWhere = sqlite3ExprDup(db, pWhere, 0); + pFrom = sqlite3SrcListAppend(db, 0, 0, 0); + if( pFrom ){ + assert( pFrom->nSrc==1 ); + pFrom->a[0].zName = sqlite3DbStrDup(db, pView->zName); + pFrom->a[0].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName); + assert( pFrom->a[0].pOn==0 ); + assert( pFrom->a[0].pUsing==0 ); + } + pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0); + sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur); + sqlite3Select(pParse, pSel, &dest); + sqlite3SelectDelete(db, pSel); } +#endif /* !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) */ +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) /* -** Generate code that will erase and refill index *pIdx. This is -** used to initialize a newly created index or to recompute the -** content of an index in response to a REINDEX command. +** Generate an expression tree to implement the WHERE, ORDER BY, +** and LIMIT/OFFSET portion of DELETE and UPDATE statements. ** -** if memRootPage is not negative, it means that the index is newly -** created. The register specified by memRootPage contains the -** root page number of the index. If memRootPage is negative, then -** the index already exists and must be cleared before being refilled and -** the root page number of the index is taken from pIndex->tnum. +** DELETE FROM table_wxyz WHERE a<5 ORDER BY a LIMIT 1; +** \__________________________/ +** pLimitWhere (pInClause) */ -static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){ - Table *pTab = pIndex->pTable; /* The table that is indexed */ - int iTab = pParse->nTab++; /* Btree cursor used for pTab */ - int iIdx = pParse->nTab++; /* Btree cursor used for pIndex */ - int addr1; /* Address of top of loop */ - int tnum; /* Root page of index */ - Vdbe *v; /* Generate code into this virtual machine */ - KeyInfo *pKey; /* KeyInfo for index */ - int regIdxKey; /* Registers containing the index key */ - int regRecord; /* Register holding assemblied index record */ - sqlite3 *db = pParse->db; /* The database connection */ - int iDb = sqlite3SchemaToIndex(db, pIndex->pSchema); +SQLITE_PRIVATE Expr *sqlite3LimitWhere( + Parse *pParse, /* The parser context */ + SrcList *pSrc, /* the FROM clause -- which tables to scan */ + Expr *pWhere, /* The WHERE clause. May be null */ + ExprList *pOrderBy, /* The ORDER BY clause. May be null */ + Expr *pLimit, /* The LIMIT clause. May be null */ + Expr *pOffset, /* The OFFSET clause. May be null */ + char *zStmtType /* Either DELETE or UPDATE. For err msgs. */ +){ + Expr *pWhereRowid = NULL; /* WHERE rowid .. */ + Expr *pInClause = NULL; /* WHERE rowid IN ( select ) */ + Expr *pSelectRowid = NULL; /* SELECT rowid ... */ + ExprList *pEList = NULL; /* Expression list contaning only pSelectRowid */ + SrcList *pSelectSrc = NULL; /* SELECT rowid FROM x ... (dup of pSrc) */ + Select *pSelect = NULL; /* Complete SELECT tree */ -#ifndef SQLITE_OMIT_AUTHORIZATION - if( sqlite3AuthCheck(pParse, SQLITE_REINDEX, pIndex->zName, 0, - db->aDb[iDb].zName ) ){ - return; + /* Check that there isn't an ORDER BY without a LIMIT clause. + */ + if( pOrderBy && (pLimit == 0) ) { + sqlite3ErrorMsg(pParse, "ORDER BY without LIMIT on %s", zStmtType); + goto limit_where_cleanup_2; + } + + /* We only need to generate a select expression if there + ** is a limit/offset term to enforce. + */ + if( pLimit == 0 ) { + /* if pLimit is null, pOffset will always be null as well. */ + assert( pOffset == 0 ); + return pWhere; } -#endif - /* Require a write-lock on the table to perform this operation */ - sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName); + /* Generate a select expression tree to enforce the limit/offset + ** term for the DELETE or UPDATE statement. For example: + ** DELETE FROM table_a WHERE col1=1 ORDER BY col2 LIMIT 1 OFFSET 1 + ** becomes: + ** DELETE FROM table_a WHERE rowid IN ( + ** SELECT rowid FROM table_a WHERE col1=1 ORDER BY col2 LIMIT 1 OFFSET 1 + ** ); + */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) return; - if( memRootPage>=0 ){ - tnum = memRootPage; - }else{ - tnum = pIndex->tnum; - sqlite3VdbeAddOp2(v, OP_Clear, tnum, iDb); - } - pKey = sqlite3IndexKeyinfo(pParse, pIndex); - sqlite3VdbeAddOp4(v, OP_OpenWrite, iIdx, tnum, iDb, - (char *)pKey, P4_KEYINFO_HANDOFF); - if( memRootPage>=0 ){ - sqlite3VdbeChangeP5(v, 1); - } - sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); - addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0); - regRecord = sqlite3GetTempReg(pParse); - regIdxKey = sqlite3GenerateIndexKey(pParse, pIndex, iTab, regRecord, 1); - if( pIndex->onError!=OE_None ){ - const int regRowid = regIdxKey + pIndex->nColumn; - const int j2 = sqlite3VdbeCurrentAddr(v) + 2; - void * const pRegKey = SQLITE_INT_TO_PTR(regIdxKey); - - /* The registers accessed by the OP_IsUnique opcode were allocated - ** using sqlite3GetTempRange() inside of the sqlite3GenerateIndexKey() - ** call above. Just before that function was freed they were released - ** (made available to the compiler for reuse) using - ** sqlite3ReleaseTempRange(). So in some ways having the OP_IsUnique - ** opcode use the values stored within seems dangerous. However, since - ** we can be sure that no other temp registers have been allocated - ** since sqlite3ReleaseTempRange() was called, it is safe to do so. - */ - sqlite3VdbeAddOp4(v, OP_IsUnique, iIdx, j2, regRowid, pRegKey, P4_INT32); - sqlite3HaltConstraint( - pParse, OE_Abort, "indexed columns are not unique", P4_STATIC); + pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); + if( pSelectRowid == 0 ) goto limit_where_cleanup_2; + pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid); + if( pEList == 0 ) goto limit_where_cleanup_2; + + /* duplicate the FROM clause as it is needed by both the DELETE/UPDATE tree + ** and the SELECT subtree. */ + pSelectSrc = sqlite3SrcListDup(pParse->db, pSrc, 0); + if( pSelectSrc == 0 ) { + sqlite3ExprListDelete(pParse->db, pEList); + goto limit_where_cleanup_2; } - sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdx, regRecord); - sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); - sqlite3ReleaseTempReg(pParse, regRecord); - sqlite3VdbeAddOp2(v, OP_Next, iTab, addr1+1); - sqlite3VdbeJumpHere(v, addr1); - sqlite3VdbeAddOp1(v, OP_Close, iTab); - sqlite3VdbeAddOp1(v, OP_Close, iIdx); + + /* generate the SELECT expression tree. */ + pSelect = sqlite3SelectNew(pParse,pEList,pSelectSrc,pWhere,0,0, + pOrderBy,0,pLimit,pOffset); + if( pSelect == 0 ) return 0; + + /* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */ + pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); + if( pWhereRowid == 0 ) goto limit_where_cleanup_1; + pInClause = sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0, 0); + if( pInClause == 0 ) goto limit_where_cleanup_1; + + pInClause->x.pSelect = pSelect; + pInClause->flags |= EP_xIsSelect; + sqlite3ExprSetHeight(pParse, pInClause); + return pInClause; + + /* something went wrong. clean up anything allocated. */ +limit_where_cleanup_1: + sqlite3SelectDelete(pParse->db, pSelect); + return 0; + +limit_where_cleanup_2: + sqlite3ExprDelete(pParse->db, pWhere); + sqlite3ExprListDelete(pParse->db, pOrderBy); + sqlite3ExprDelete(pParse->db, pLimit); + sqlite3ExprDelete(pParse->db, pOffset); + return 0; } +#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) */ + /* && !defined(SQLITE_OMIT_SUBQUERY) */ /* -** Create a new index for an SQL table. pName1.pName2 is the name of the index -** and pTblList is the name of the table that is to be indexed. Both will -** be NULL for a primary key or an index that is created to satisfy a -** UNIQUE constraint. If pTable and pIndex are NULL, use pParse->pNewTable -** as the table to be indexed. pParse->pNewTable is a table that is -** currently being constructed by a CREATE TABLE statement. -** -** pList is a list of columns to be indexed. pList will be NULL if this -** is a primary key or unique-constraint on the most recent column added -** to the table currently under construction. +** Generate code for a DELETE FROM statement. ** -** If the index is created successfully, return a pointer to the new Index -** structure. This is used by sqlite3AddPrimaryKey() to mark the index -** as the tables primary key (Index.autoIndex==2). +** DELETE FROM table_wxyz WHERE a<5 AND b NOT NULL; +** \________/ \________________/ +** pTabList pWhere */ -SQLITE_PRIVATE Index *sqlite3CreateIndex( - Parse *pParse, /* All information about this parse */ - Token *pName1, /* First part of index name. May be NULL */ - Token *pName2, /* Second part of index name. May be NULL */ - SrcList *pTblName, /* Table to index. Use pParse->pNewTable if 0 */ - ExprList *pList, /* A list of columns to be indexed */ - int onError, /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ - Token *pStart, /* The CREATE token that begins this statement */ - Token *pEnd, /* The ")" that closes the CREATE INDEX statement */ - int sortOrder, /* Sort order of primary key when pList==NULL */ - int ifNotExist /* Omit error if index already exists */ +SQLITE_PRIVATE void sqlite3DeleteFrom( + Parse *pParse, /* The parser context */ + SrcList *pTabList, /* The table from which we should delete things */ + Expr *pWhere /* The WHERE clause. May be null */ ){ - Index *pRet = 0; /* Pointer to return */ - Table *pTab = 0; /* Table to be indexed */ - Index *pIndex = 0; /* The index to be created */ - char *zName = 0; /* Name of the index */ - int nName; /* Number of characters in zName */ - int i, j; - Token nullId; /* Fake token for an empty ID list */ - DbFixer sFix; /* For assigning database names to pTable */ - int sortOrderMask; /* 1 to honor DESC in index. 0 to ignore. */ - sqlite3 *db = pParse->db; - Db *pDb; /* The specific table containing the indexed database */ - int iDb; /* Index of the database that is being written */ - Token *pName = 0; /* Unqualified name of the index to create */ - struct ExprList_item *pListItem; /* For looping over pList */ - int nCol; - int nExtra = 0; - char *zExtra; + Vdbe *v; /* The virtual database engine */ + Table *pTab; /* The table from which records will be deleted */ + const char *zDb; /* Name of database holding pTab */ + int i; /* Loop counter */ + WhereInfo *pWInfo; /* Information about the WHERE clause */ + Index *pIdx; /* For looping over indices of the table */ + int iTabCur; /* Cursor number for the table */ + int iDataCur; /* VDBE cursor for the canonical data source */ + int iIdxCur; /* Cursor number of the first index */ + int nIdx; /* Number of indices */ + sqlite3 *db; /* Main database structure */ + AuthContext sContext; /* Authorization context */ + NameContext sNC; /* Name context to resolve expressions in */ + int iDb; /* Database number */ + int memCnt = -1; /* Memory cell used for change counting */ + int rcauth; /* Value returned by authorization callback */ + int okOnePass; /* True for one-pass algorithm without the FIFO */ + int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */ + u8 *aToOpen = 0; /* Open cursor iTabCur+j if aToOpen[j] is true */ + Index *pPk; /* The PRIMARY KEY index on the table */ + int iPk = 0; /* First of nPk registers holding PRIMARY KEY value */ + i16 nPk = 1; /* Number of columns in the PRIMARY KEY */ + int iKey; /* Memory cell holding key of row to be deleted */ + i16 nKey; /* Number of memory cells in the row key */ + int iEphCur = 0; /* Ephemeral table holding all primary key values */ + int iRowSet = 0; /* Register for rowset of rows to delete */ + int addrBypass = 0; /* Address of jump over the delete logic */ + int addrLoop = 0; /* Top of the delete loop */ + int addrDelete = 0; /* Jump directly to the delete logic */ + int addrEphOpen = 0; /* Instruction to open the Ephemeral table */ + +#ifndef SQLITE_OMIT_TRIGGER + int isView; /* True if attempting to delete from a view */ + Trigger *pTrigger; /* List of table triggers, if required */ +#endif - assert( pStart==0 || pEnd!=0 ); /* pEnd must be non-NULL if pStart is */ - assert( pParse->nErr==0 ); /* Never called with prior errors */ - if( db->mallocFailed || IN_DECLARE_VTAB ){ - goto exit_create_index; - } - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ - goto exit_create_index; + memset(&sContext, 0, sizeof(sContext)); + db = pParse->db; + if( pParse->nErr || db->mallocFailed ){ + goto delete_from_cleanup; } + assert( pTabList->nSrc==1 ); - /* - ** Find the table that is to be indexed. Return early if not found. + /* Locate the table which we want to delete. This table has to be + ** put in an SrcList structure because some of the subroutines we + ** will be calling are designed to work with multiple tables and expect + ** an SrcList* parameter instead of just a Table* parameter. */ - if( pTblName!=0 ){ - - /* Use the two-part index name to determine the database - ** to search for the table. 'Fix' the table name to this db - ** before looking up the table. - */ - assert( pName1 && pName2 ); - iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); - if( iDb<0 ) goto exit_create_index; + pTab = sqlite3SrcListLookup(pParse, pTabList); + if( pTab==0 ) goto delete_from_cleanup; -#ifndef SQLITE_OMIT_TEMPDB - /* If the index name was unqualified, check if the the table - ** is a temp table. If so, set the database to 1. Do not do this - ** if initialising a database schema. - */ - if( !db->init.busy ){ - pTab = sqlite3SrcListLookup(pParse, pTblName); - if( pName2->n==0 && pTab && pTab->pSchema==db->aDb[1].pSchema ){ - iDb = 1; - } - } + /* Figure out if we have any triggers and if the table being + ** deleted from is a view + */ +#ifndef SQLITE_OMIT_TRIGGER + pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); + isView = pTab->pSelect!=0; +#else +# define pTrigger 0 +# define isView 0 +#endif +#ifdef SQLITE_OMIT_VIEW +# undef isView +# define isView 0 #endif - if( sqlite3FixInit(&sFix, pParse, iDb, "index", pName) && - sqlite3FixSrcList(&sFix, pTblName) - ){ - /* Because the parser constructs pTblName from a single identifier, - ** sqlite3FixSrcList can never fail. */ - assert(0); - } - pTab = sqlite3LocateTable(pParse, 0, pTblName->a[0].zName, - pTblName->a[0].zDatabase); - if( !pTab || db->mallocFailed ) goto exit_create_index; - assert( db->aDb[iDb].pSchema==pTab->pSchema ); - }else{ - assert( pName==0 ); - pTab = pParse->pNewTable; - if( !pTab ) goto exit_create_index; - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + /* If pTab is really a view, make sure it has been initialized. + */ + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ + goto delete_from_cleanup; } - pDb = &db->aDb[iDb]; - assert( pTab!=0 ); - assert( pParse->nErr==0 ); - if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 - && memcmp(&pTab->zName[7],"altertab_",9)!=0 ){ - sqlite3ErrorMsg(pParse, "table %s may not be indexed", pTab->zName); - goto exit_create_index; - } -#ifndef SQLITE_OMIT_VIEW - if( pTab->pSelect ){ - sqlite3ErrorMsg(pParse, "views may not be indexed"); - goto exit_create_index; + if( sqlite3IsReadOnly(pParse, pTab, (pTrigger?1:0)) ){ + goto delete_from_cleanup; } -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTab) ){ - sqlite3ErrorMsg(pParse, "virtual tables may not be indexed"); - goto exit_create_index; + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + assert( iDbnDb ); + zDb = db->aDb[iDb].zName; + rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb); + assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE ); + if( rcauth==SQLITE_DENY ){ + goto delete_from_cleanup; } -#endif + assert(!isView || pTrigger); - /* - ** Find the name of the index. Make sure there is not already another - ** index or table with the same name. - ** - ** Exception: If we are reading the names of permanent indices from the - ** sqlite_master table (because some other process changed the schema) and - ** one of the index names collides with the name of a temporary table or - ** index, then we will continue to process this index. - ** - ** If pName==0 it means that we are - ** dealing with a primary key or UNIQUE constraint. We have to invent our - ** own name. + /* Assign cursor numbers to the table and all its indices. */ - if( pName ){ - zName = sqlite3NameFromToken(db, pName); - if( zName==0 ) goto exit_create_index; - if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ - goto exit_create_index; - } - if( !db->init.busy ){ - if( sqlite3FindTable(db, zName, 0)!=0 ){ - sqlite3ErrorMsg(pParse, "there is already a table named %s", zName); - goto exit_create_index; - } - } - if( sqlite3FindIndex(db, zName, pDb->zName)!=0 ){ - if( !ifNotExist ){ - sqlite3ErrorMsg(pParse, "index %s already exists", zName); - }else{ - assert( !db->init.busy ); - sqlite3CodeVerifySchema(pParse, iDb); - } - goto exit_create_index; - } - }else{ - int n; - Index *pLoop; - for(pLoop=pTab->pIndex, n=1; pLoop; pLoop=pLoop->pNext, n++){} - zName = sqlite3MPrintf(db, "sqlite_autoindex_%s_%d", pTab->zName, n); - if( zName==0 ){ - goto exit_create_index; - } + assert( pTabList->nSrc==1 ); + iTabCur = pTabList->a[0].iCursor = pParse->nTab++; + for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ + pParse->nTab++; } - /* Check for authorization to create an index. + /* Start the view context */ -#ifndef SQLITE_OMIT_AUTHORIZATION - { - const char *zDb = pDb->zName; - if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iDb), 0, zDb) ){ - goto exit_create_index; - } - i = SQLITE_CREATE_INDEX; - if( !OMIT_TEMPDB && iDb==1 ) i = SQLITE_CREATE_TEMP_INDEX; - if( sqlite3AuthCheck(pParse, i, zName, pTab->zName, zDb) ){ - goto exit_create_index; - } + if( isView ){ + sqlite3AuthContextPush(pParse, &sContext, pTab->zName); } -#endif - /* If pList==0, it means this routine was called to make a primary - ** key out of the last column added to the table under construction. - ** So create a fake list to simulate this. + /* Begin generating code. */ - if( pList==0 ){ - nullId.z = pTab->aCol[pTab->nCol-1].zName; - nullId.n = sqlite3Strlen30((char*)nullId.z); - pList = sqlite3ExprListAppend(pParse, 0, 0); - if( pList==0 ) goto exit_create_index; - sqlite3ExprListSetName(pParse, pList, &nullId, 0); - pList->a[0].sortOrder = (u8)sortOrder; + v = sqlite3GetVdbe(pParse); + if( v==0 ){ + goto delete_from_cleanup; } + if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); + sqlite3BeginWriteOperation(pParse, 1, iDb); - /* Figure out how many bytes of space are required to store explicitly - ** specified collation sequence names. + /* If we are trying to delete from a view, realize that view into + ** an ephemeral table. */ - for(i=0; inExpr; i++){ - Expr *pExpr = pList->a[i].pExpr; - if( pExpr ){ - CollSeq *pColl = pExpr->pColl; - /* Either pColl!=0 or there was an OOM failure. But if an OOM - ** failure we have quit before reaching this point. */ - if( ALWAYS(pColl) ){ - nExtra += (1 + sqlite3Strlen30(pColl->zName)); - } - } +#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) + if( isView ){ + sqlite3MaterializeView(pParse, pTab, pWhere, iTabCur); + iDataCur = iIdxCur = iTabCur; } +#endif - /* - ** Allocate the index structure. + /* Resolve the column names in the WHERE clause. */ - nName = sqlite3Strlen30(zName); - nCol = pList->nExpr; - pIndex = sqlite3DbMallocZero(db, - sizeof(Index) + /* Index structure */ - sizeof(int)*nCol + /* Index.aiColumn */ - sizeof(int)*(nCol+1) + /* Index.aiRowEst */ - sizeof(char *)*nCol + /* Index.azColl */ - sizeof(u8)*nCol + /* Index.aSortOrder */ - nName + 1 + /* Index.zName */ - nExtra /* Collation sequence names */ - ); - if( db->mallocFailed ){ - goto exit_create_index; + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + if( sqlite3ResolveExprNames(&sNC, pWhere) ){ + goto delete_from_cleanup; } - pIndex->azColl = (char**)(&pIndex[1]); - pIndex->aiColumn = (int *)(&pIndex->azColl[nCol]); - pIndex->aiRowEst = (unsigned *)(&pIndex->aiColumn[nCol]); - pIndex->aSortOrder = (u8 *)(&pIndex->aiRowEst[nCol+1]); - pIndex->zName = (char *)(&pIndex->aSortOrder[nCol]); - zExtra = (char *)(&pIndex->zName[nName+1]); - memcpy(pIndex->zName, zName, nName+1); - pIndex->pTable = pTab; - pIndex->nColumn = pList->nExpr; - pIndex->onError = (u8)onError; - pIndex->autoIndex = (u8)(pName==0); - pIndex->pSchema = db->aDb[iDb].pSchema; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - /* Check to see if we should honor DESC requests on index columns + /* Initialize the counter of the number of rows deleted, if + ** we are counting rows. */ - if( pDb->pSchema->file_format>=4 ){ - sortOrderMask = -1; /* Honor DESC */ - }else{ - sortOrderMask = 0; /* Ignore DESC */ + if( db->flags & SQLITE_CountRows ){ + memCnt = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt); } - /* Scan the names of the columns of the table to be indexed and - ** load the column indices into the Index structure. Report an error - ** if any column is not found. - ** - ** TODO: Add a test to make sure that the same column is not named - ** more than once within the same index. Only the first instance of - ** the column will ever be used by the optimizer. Note that using the - ** same column more than once cannot be an error because that would - ** break backwards compatibility - it needs to be a warning. - */ - for(i=0, pListItem=pList->a; inExpr; i++, pListItem++){ - const char *zColName = pListItem->zName; - Column *pTabCol; - int requestedSortOrder; - char *zColl; /* Collation sequence name */ - - for(j=0, pTabCol=pTab->aCol; jnCol; j++, pTabCol++){ - if( sqlite3StrICmp(zColName, pTabCol->zName)==0 ) break; +#ifndef SQLITE_OMIT_TRUNCATE_OPTIMIZATION + /* Special case: A DELETE without a WHERE clause deletes everything. + ** It is easier just to erase the whole table. Prior to version 3.6.5, + ** this optimization caused the row change count (the value returned by + ** API function sqlite3_count_changes) to be set incorrectly. */ + if( rcauth==SQLITE_OK && pWhere==0 && !pTrigger && !IsVirtual(pTab) + && 0==sqlite3FkRequired(pParse, pTab, 0, 0) + ){ + assert( !isView ); + sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName); + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt, + pTab->zName, P4_STATIC); } - if( j>=pTab->nCol ){ - sqlite3ErrorMsg(pParse, "table %s has no column named %s", - pTab->zName, zColName); - pParse->checkSchema = 1; - goto exit_create_index; + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + assert( pIdx->pSchema==pTab->pSchema ); + sqlite3VdbeAddOp2(v, OP_Clear, pIdx->tnum, iDb); } - pIndex->aiColumn[i] = j; - /* Justification of the ALWAYS(pListItem->pExpr->pColl): Because of - ** the way the "idxlist" non-terminal is constructed by the parser, - ** if pListItem->pExpr is not null then either pListItem->pExpr->pColl - ** must exist or else there must have been an OOM error. But if there - ** was an OOM error, we would never reach this point. */ - if( pListItem->pExpr && ALWAYS(pListItem->pExpr->pColl) ){ - int nColl; - zColl = pListItem->pExpr->pColl->zName; - nColl = sqlite3Strlen30(zColl) + 1; - assert( nExtra>=nColl ); - memcpy(zExtra, zColl, nColl); - zColl = zExtra; - zExtra += nColl; - nExtra -= nColl; + }else +#endif /* SQLITE_OMIT_TRUNCATE_OPTIMIZATION */ + { + if( HasRowid(pTab) ){ + /* For a rowid table, initialize the RowSet to an empty set */ + pPk = 0; + nPk = 1; + iRowSet = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Null, 0, iRowSet); }else{ - zColl = pTab->aCol[j].zColl; - if( !zColl ){ - zColl = db->pDfltColl->zName; - } + /* For a WITHOUT ROWID table, create an ephemeral table used to + ** hold all primary keys for rows to be deleted. */ + pPk = sqlite3PrimaryKeyIndex(pTab); + assert( pPk!=0 ); + nPk = pPk->nKeyCol; + iPk = pParse->nMem+1; + pParse->nMem += nPk; + iEphCur = pParse->nTab++; + addrEphOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEphCur, nPk); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); } - if( !db->init.busy && !sqlite3LocateCollSeq(pParse, zColl) ){ - goto exit_create_index; - } - pIndex->azColl[i] = zColl; - requestedSortOrder = pListItem->sortOrder & sortOrderMask; - pIndex->aSortOrder[i] = (u8)requestedSortOrder; - } - sqlite3DefaultRowEst(pIndex); - - if( pTab==pParse->pNewTable ){ - /* This routine has been called to create an automatic index as a - ** result of a PRIMARY KEY or UNIQUE clause on a column definition, or - ** a PRIMARY KEY or UNIQUE clause following the column definitions. - ** i.e. one of: - ** - ** CREATE TABLE t(x PRIMARY KEY, y); - ** CREATE TABLE t(x, y, UNIQUE(x, y)); - ** - ** Either way, check to see if the table already has such an index. If - ** so, don't bother creating this one. This only applies to - ** automatically created indices. Users can do as they wish with - ** explicit indices. - ** - ** Two UNIQUE or PRIMARY KEY constraints are considered equivalent - ** (and thus suppressing the second one) even if they have different - ** sort orders. - ** - ** If there are different collating sequences or if the columns of - ** the constraint occur in different orders, then the constraints are - ** considered distinct and both result in separate indices. + + /* Construct a query to find the rowid or primary key for every row + ** to be deleted, based on the WHERE clause. */ - Index *pIdx; - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - int k; - assert( pIdx->onError!=OE_None ); - assert( pIdx->autoIndex ); - assert( pIndex->onError!=OE_None ); - - if( pIdx->nColumn!=pIndex->nColumn ) continue; - for(k=0; knColumn; k++){ - const char *z1; - const char *z2; - if( pIdx->aiColumn[k]!=pIndex->aiColumn[k] ) break; - z1 = pIdx->azColl[k]; - z2 = pIndex->azColl[k]; - if( z1!=z2 && sqlite3StrICmp(z1, z2) ) break; - } - if( k==pIdx->nColumn ){ - if( pIdx->onError!=pIndex->onError ){ - /* This constraint creates the same index as a previous - ** constraint specified somewhere in the CREATE TABLE statement. - ** However the ON CONFLICT clauses are different. If both this - ** constraint and the previous equivalent constraint have explicit - ** ON CONFLICT clauses this is an error. Otherwise, use the - ** explicitly specified behaviour for the index. - */ - if( !(pIdx->onError==OE_Default || pIndex->onError==OE_Default) ){ - sqlite3ErrorMsg(pParse, - "conflicting ON CONFLICT clauses specified", 0); - } - if( pIdx->onError==OE_Default ){ - pIdx->onError = pIndex->onError; - } - } - goto exit_create_index; - } - } - } - - /* Link the new Index structure to its table and to the other - ** in-memory database structures. - */ - if( db->init.busy ){ - Index *p; - assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); - p = sqlite3HashInsert(&pIndex->pSchema->idxHash, - pIndex->zName, sqlite3Strlen30(pIndex->zName), - pIndex); - if( p ){ - assert( p==pIndex ); /* Malloc must have failed */ - db->mallocFailed = 1; - goto exit_create_index; + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, + WHERE_ONEPASS_DESIRED|WHERE_DUPLICATES_OK, + iTabCur+1); + if( pWInfo==0 ) goto delete_from_cleanup; + okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + + /* Keep track of the number of rows to be deleted */ + if( db->flags & SQLITE_CountRows ){ + sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1); } - db->flags |= SQLITE_InternChanges; - if( pTblName!=0 ){ - pIndex->tnum = db->init.newTnum; + + /* Extract the rowid or primary key for the current row */ + if( pPk ){ + for(i=0; iaiColumn[i], iPk+i); + } + iKey = iPk; + }else{ + iKey = pParse->nMem + 1; + iKey = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iTabCur, iKey, 0); + if( iKey>pParse->nMem ) pParse->nMem = iKey; } - } - - /* If the db->init.busy is 0 then create the index on disk. This - ** involves writing the index into the master table and filling in the - ** index with the current table contents. - ** - ** The db->init.busy is 0 when the user first enters a CREATE INDEX - ** command. db->init.busy is 1 when a database is opened and - ** CREATE INDEX statements are read out of the master table. In - ** the latter case the index already exists on disk, which is why - ** we don't want to recreate it. - ** - ** If pTblName==0 it means this index is generated as a primary key - ** or UNIQUE constraint of a CREATE TABLE statement. Since the table - ** has just been created, it contains no data and the index initialization - ** step can be skipped. - */ - else{ /* if( db->init.busy==0 ) */ - Vdbe *v; - char *zStmt; - int iMem = ++pParse->nMem; - - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto exit_create_index; - - - /* Create the rootpage for the index - */ - sqlite3BeginWriteOperation(pParse, 1, iDb); - sqlite3VdbeAddOp2(v, OP_CreateIndex, iDb, iMem); - - /* Gather the complete text of the CREATE INDEX statement into - ** the zStmt variable - */ - if( pStart ){ - assert( pEnd!=0 ); - /* A named index with an explicit CREATE INDEX statement */ - zStmt = sqlite3MPrintf(db, "CREATE%s INDEX %.*s", - onError==OE_None ? "" : " UNIQUE", - pEnd->z - pName->z + 1, - pName->z); + + if( okOnePass ){ + /* For ONEPASS, no need to store the rowid/primary-key. There is only + ** one, so just keep it in its register(s) and fall through to the + ** delete code. + */ + nKey = nPk; /* OP_Found will use an unpacked key */ + aToOpen = sqlite3DbMallocRaw(db, nIdx+2); + if( aToOpen==0 ){ + sqlite3WhereEnd(pWInfo); + goto delete_from_cleanup; + } + memset(aToOpen, 1, nIdx+1); + aToOpen[nIdx+1] = 0; + if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iTabCur] = 0; + if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iTabCur] = 0; + if( addrEphOpen ) sqlite3VdbeChangeToNoop(v, addrEphOpen); + addrDelete = sqlite3VdbeAddOp0(v, OP_Goto); /* Jump to DELETE logic */ + }else if( pPk ){ + /* Construct a composite key for the row to be deleted and remember it */ + iKey = ++pParse->nMem; + nKey = 0; /* Zero tells OP_Found to use a composite key */ + sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, iKey, + sqlite3IndexAffinityStr(v, pPk), nPk); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iEphCur, iKey); }else{ - /* An automatic index created by a PRIMARY KEY or UNIQUE constraint */ - /* zStmt = sqlite3MPrintf(""); */ - zStmt = 0; + /* Get the rowid of the row to be deleted and remember it in the RowSet */ + nKey = 1; /* OP_Seek always uses a single rowid */ + sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, iKey); } - - /* Add an entry in sqlite_master for this index - */ - sqlite3NestedParse(pParse, - "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);", - db->aDb[iDb].zName, SCHEMA_TABLE(iDb), - pIndex->zName, - pTab->zName, - iMem, - zStmt - ); - sqlite3DbFree(db, zStmt); - - /* Fill the index with data and reparse the schema. Code an OP_Expire - ** to invalidate all pre-compiled statements. + + /* End of the WHERE loop */ + sqlite3WhereEnd(pWInfo); + if( okOnePass ){ + /* Bypass the delete logic below if the WHERE loop found zero rows */ + addrBypass = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrBypass); + sqlite3VdbeJumpHere(v, addrDelete); + } + + /* Unless this is a view, open cursors for the table we are + ** deleting from and all its indices. If this is a view, then the + ** only effect this statement has is to fire the INSTEAD OF + ** triggers. */ - if( pTblName ){ - sqlite3RefillIndex(pParse, pIndex, iMem); - sqlite3ChangeCookie(pParse, iDb); - sqlite3VdbeAddParseSchemaOp(v, iDb, - sqlite3MPrintf(db, "name='%q' AND type='index'", pIndex->zName)); - sqlite3VdbeAddOp1(v, OP_Expire, 0); + if( !isView ){ + testcase( IsVirtual(pTab) ); + sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iTabCur, aToOpen, + &iDataCur, &iIdxCur); + assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur ); + assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 ); } - } - - /* When adding an index to the list of indices for a table, make - ** sure all indices labeled OE_Replace come after all those labeled - ** OE_Ignore. This is necessary for the correct constraint check - ** processing (in sqlite3GenerateConstraintChecks()) as part of - ** UPDATE and INSERT statements. - */ - if( db->init.busy || pTblName==0 ){ - if( onError!=OE_Replace || pTab->pIndex==0 - || pTab->pIndex->onError==OE_Replace){ - pIndex->pNext = pTab->pIndex; - pTab->pIndex = pIndex; + + /* Set up a loop over the rowids/primary-keys that were found in the + ** where-clause loop above. + */ + if( okOnePass ){ + /* Just one row. Hence the top-of-loop is a no-op */ + assert( nKey==nPk ); /* OP_Found will use an unpacked key */ + assert( !IsVirtual(pTab) ); + if( aToOpen[iDataCur-iTabCur] ){ + assert( pPk!=0 || pTab->pSelect!=0 ); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, addrBypass, iKey, nKey); + VdbeCoverage(v); + } + }else if( pPk ){ + addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_RowKey, iEphCur, iKey); + assert( nKey==0 ); /* OP_Found will use a composite key */ }else{ - Index *pOther = pTab->pIndex; - while( pOther->pNext && pOther->pNext->onError!=OE_Replace ){ - pOther = pOther->pNext; + addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey); + VdbeCoverage(v); + assert( nKey==1 ); + } + + /* Delete the row */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); + sqlite3VtabMakeWritable(pParse, pTab); + sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB); + sqlite3VdbeChangeP5(v, OE_Abort); + sqlite3MayAbort(pParse); + }else +#endif + { + int count = (pParse->nested==0); /* True to count changes */ + sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur, + iKey, nKey, count, OE_Default, okOnePass); + } + + /* End of the loop over all rowids/primary-keys. */ + if( okOnePass ){ + sqlite3VdbeResolveLabel(v, addrBypass); + }else if( pPk ){ + sqlite3VdbeAddOp2(v, OP_Next, iEphCur, addrLoop+1); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addrLoop); + }else{ + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrLoop); + sqlite3VdbeJumpHere(v, addrLoop); + } + + /* Close the cursors open on the table and its indexes. */ + if( !isView && !IsVirtual(pTab) ){ + if( !pPk ) sqlite3VdbeAddOp1(v, OP_Close, iDataCur); + for(i=0, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){ + sqlite3VdbeAddOp1(v, OP_Close, iIdxCur + i); } - pIndex->pNext = pOther->pNext; - pOther->pNext = pIndex; } - pRet = pIndex; - pIndex = 0; + } /* End non-truncate path */ + + /* Update the sqlite_sequence table by storing the content of the + ** maximum rowid counter values recorded while inserting into + ** autoincrement tables. + */ + if( pParse->nested==0 && pParse->pTriggerTab==0 ){ + sqlite3AutoincrementEnd(pParse); } - /* Clean up before exiting */ -exit_create_index: - if( pIndex ){ - sqlite3DbFree(db, pIndex->zColAff); - sqlite3DbFree(db, pIndex); + /* Return the number of rows that were deleted. If this routine is + ** generating code because of a call to sqlite3NestedParse(), do not + ** invoke the callback function. + */ + if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC); } - sqlite3ExprListDelete(db, pList); - sqlite3SrcListDelete(db, pTblName); - sqlite3DbFree(db, zName); - return pRet; + +delete_from_cleanup: + sqlite3AuthContextPop(&sContext); + sqlite3SrcListDelete(db, pTabList); + sqlite3ExprDelete(db, pWhere); + sqlite3DbFree(db, aToOpen); + return; } +/* Make sure "isView" and other macros defined above are undefined. Otherwise +** they may interfere with compilation of other functions in this file +** (or in another file, if this file becomes part of the amalgamation). */ +#ifdef isView + #undef isView +#endif +#ifdef pTrigger + #undef pTrigger +#endif /* -** Fill the Index.aiRowEst[] array with default information - information -** to be used when we have not run the ANALYZE command. +** This routine generates VDBE code that causes a single row of a +** single table to be deleted. Both the original table entry and +** all indices are removed. ** -** aiRowEst[0] is suppose to contain the number of elements in the index. -** Since we do not know, guess 1 million. aiRowEst[1] is an estimate of the -** number of rows in the table that match any particular value of the -** first column of the index. aiRowEst[2] is an estimate of the number -** of rows that match any particular combiniation of the first 2 columns -** of the index. And so forth. It must always be the case that -* -** aiRowEst[N]<=aiRowEst[N-1] -** aiRowEst[N]>=1 +** Preconditions: ** -** Apart from that, we have little to go on besides intuition as to -** how aiRowEst[] should be initialized. The numbers generated here -** are based on typical values found in actual indices. +** 1. iDataCur is an open cursor on the btree that is the canonical data +** store for the table. (This will be either the table itself, +** in the case of a rowid table, or the PRIMARY KEY index in the case +** of a WITHOUT ROWID table.) +** +** 2. Read/write cursors for all indices of pTab must be open as +** cursor number iIdxCur+i for the i-th index. +** +** 3. The primary key for the row to be deleted must be stored in a +** sequence of nPk memory cells starting at iPk. If nPk==0 that means +** that a search record formed from OP_MakeRecord is contained in the +** single memory location iPk. */ -SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){ - unsigned *a = pIdx->aiRowEst; - int i; - unsigned n; - assert( a!=0 ); - a[0] = pIdx->pTable->nRowEst; - if( a[0]<10 ) a[0] = 10; - n = 10; - for(i=1; i<=pIdx->nColumn; i++){ - a[i] = n; - if( n>5 ) n--; - } - if( pIdx->onError!=OE_None ){ - a[pIdx->nColumn] = 1; - } -} +SQLITE_PRIVATE void sqlite3GenerateRowDelete( + Parse *pParse, /* Parsing context */ + Table *pTab, /* Table containing the row to be deleted */ + Trigger *pTrigger, /* List of triggers to (potentially) fire */ + int iDataCur, /* Cursor from which column data is extracted */ + int iIdxCur, /* First index cursor */ + int iPk, /* First memory cell containing the PRIMARY KEY */ + i16 nPk, /* Number of PRIMARY KEY memory cells */ + u8 count, /* If non-zero, increment the row change counter */ + u8 onconf, /* Default ON CONFLICT policy for triggers */ + u8 bNoSeek /* iDataCur is already pointing to the row to delete */ +){ + Vdbe *v = pParse->pVdbe; /* Vdbe */ + int iOld = 0; /* First register in OLD.* array */ + int iLabel; /* Label resolved to end of generated code */ + u8 opSeek; /* Seek opcode */ -/* -** This routine will drop an existing named index. This routine -** implements the DROP INDEX statement. -*/ -SQLITE_PRIVATE void sqlite3DropIndex(Parse *pParse, SrcList *pName, int ifExists){ - Index *pIndex; - Vdbe *v; - sqlite3 *db = pParse->db; - int iDb; + /* Vdbe is guaranteed to have been allocated by this stage. */ + assert( v ); + VdbeModuleComment((v, "BEGIN: GenRowDel(%d,%d,%d,%d)", + iDataCur, iIdxCur, iPk, (int)nPk)); - assert( pParse->nErr==0 ); /* Never called with prior errors */ - if( db->mallocFailed ){ - goto exit_drop_index; - } - assert( pName->nSrc==1 ); - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ - goto exit_drop_index; - } - pIndex = sqlite3FindIndex(db, pName->a[0].zName, pName->a[0].zDatabase); - if( pIndex==0 ){ - if( !ifExists ){ - sqlite3ErrorMsg(pParse, "no such index: %S", pName, 0); - }else{ - sqlite3CodeVerifyNamedSchema(pParse, pName->a[0].zDatabase); - } - pParse->checkSchema = 1; - goto exit_drop_index; - } - if( pIndex->autoIndex ){ - sqlite3ErrorMsg(pParse, "index associated with UNIQUE " - "or PRIMARY KEY constraint cannot be dropped", 0); - goto exit_drop_index; + /* Seek cursor iCur to the row to delete. If this row no longer exists + ** (this can happen if a trigger program has already deleted it), do + ** not attempt to delete it or fire any DELETE triggers. */ + iLabel = sqlite3VdbeMakeLabel(v); + opSeek = HasRowid(pTab) ? OP_NotExists : OP_NotFound; + if( !bNoSeek ){ + sqlite3VdbeAddOp4Int(v, opSeek, iDataCur, iLabel, iPk, nPk); + VdbeCoverageIf(v, opSeek==OP_NotExists); + VdbeCoverageIf(v, opSeek==OP_NotFound); } - iDb = sqlite3SchemaToIndex(db, pIndex->pSchema); -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int code = SQLITE_DROP_INDEX; - Table *pTab = pIndex->pTable; - const char *zDb = db->aDb[iDb].zName; - const char *zTab = SCHEMA_TABLE(iDb); - if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){ - goto exit_drop_index; + + /* If there are any triggers to fire, allocate a range of registers to + ** use for the old.* references in the triggers. */ + if( sqlite3FkRequired(pParse, pTab, 0, 0) || pTrigger ){ + u32 mask; /* Mask of OLD.* columns in use */ + int iCol; /* Iterator used while populating OLD.* */ + int addrStart; /* Start of BEFORE trigger programs */ + + /* TODO: Could use temporary registers here. Also could attempt to + ** avoid copying the contents of the rowid register. */ + mask = sqlite3TriggerColmask( + pParse, pTrigger, 0, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onconf + ); + mask |= sqlite3FkOldmask(pParse, pTab); + iOld = pParse->nMem+1; + pParse->nMem += (1 + pTab->nCol); + + /* Populate the OLD.* pseudo-table register array. These values will be + ** used by any BEFORE and AFTER triggers that exist. */ + sqlite3VdbeAddOp2(v, OP_Copy, iPk, iOld); + for(iCol=0; iColnCol; iCol++){ + testcase( mask!=0xffffffff && iCol==31 ); + testcase( mask!=0xffffffff && iCol==32 ); + if( mask==0xffffffff || (iCol<=31 && (mask & MASKBIT32(iCol))!=0) ){ + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, iCol, iOld+iCol+1); + } } - if( !OMIT_TEMPDB && iDb ) code = SQLITE_DROP_TEMP_INDEX; - if( sqlite3AuthCheck(pParse, code, pIndex->zName, pTab->zName, zDb) ){ - goto exit_drop_index; + + /* Invoke BEFORE DELETE trigger programs. */ + addrStart = sqlite3VdbeCurrentAddr(v); + sqlite3CodeRowTrigger(pParse, pTrigger, + TK_DELETE, 0, TRIGGER_BEFORE, pTab, iOld, onconf, iLabel + ); + + /* If any BEFORE triggers were coded, then seek the cursor to the + ** row to be deleted again. It may be that the BEFORE triggers moved + ** the cursor or of already deleted the row that the cursor was + ** pointing to. + */ + if( addrStartaDb[iDb].zName, SCHEMA_TABLE(iDb), - pIndex->zName - ); - if( sqlite3FindTable(db, "sqlite_stat1", db->aDb[iDb].zName) ){ - sqlite3NestedParse(pParse, - "DELETE FROM %Q.sqlite_stat1 WHERE idx=%Q", - db->aDb[iDb].zName, pIndex->zName - ); + /* Delete the index and table entries. Skip this step if pTab is really + ** a view (in which case the only effect of the DELETE statement is to + ** fire the INSTEAD OF triggers). */ + if( pTab->pSelect==0 ){ + sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, 0); + sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0)); + if( count ){ + sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT); } - sqlite3ChangeCookie(pParse, iDb); - destroyRootPage(pParse, pIndex->tnum, iDb); - sqlite3VdbeAddOp4(v, OP_DropIndex, iDb, 0, 0, pIndex->zName, 0); } -exit_drop_index: - sqlite3SrcListDelete(db, pName); + /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to + ** handle rows (possibly in other tables) that refer via a foreign key + ** to the row just deleted. */ + sqlite3FkActions(pParse, pTab, 0, iOld, 0, 0); + + /* Invoke AFTER DELETE trigger programs. */ + sqlite3CodeRowTrigger(pParse, pTrigger, + TK_DELETE, 0, TRIGGER_AFTER, pTab, iOld, onconf, iLabel + ); + + /* Jump here if the row had already been deleted before any BEFORE + ** trigger programs were invoked. Or if a trigger program throws a + ** RAISE(IGNORE) exception. */ + sqlite3VdbeResolveLabel(v, iLabel); + VdbeModuleComment((v, "END: GenRowDel()")); } /* -** pArray is a pointer to an array of objects. Each object in the -** array is szEntry bytes in size. This routine allocates a new -** object on the end of the array. +** This routine generates VDBE code that causes the deletion of all +** index entries associated with a single row of a single table, pTab ** -** *pnEntry is the number of entries already in use. *pnAlloc is -** the previously allocated size of the array. initSize is the -** suggested initial array size allocation. +** Preconditions: ** -** The index of the new entry is returned in *pIdx. +** 1. A read/write cursor "iDataCur" must be open on the canonical storage +** btree for the table pTab. (This will be either the table itself +** for rowid tables or to the primary key index for WITHOUT ROWID +** tables.) ** -** This routine returns a pointer to the array of objects. This -** might be the same as the pArray parameter or it might be a different -** pointer if the array was resized. +** 2. Read/write cursors for all indices of pTab must be open as +** cursor number iIdxCur+i for the i-th index. (The pTab->pIndex +** index is the 0-th index.) +** +** 3. The "iDataCur" cursor must be already be positioned on the row +** that is to be deleted. */ -SQLITE_PRIVATE void *sqlite3ArrayAllocate( - sqlite3 *db, /* Connection to notify of malloc failures */ - void *pArray, /* Array of objects. Might be reallocated */ - int szEntry, /* Size of each object in the array */ - int initSize, /* Suggested initial allocation, in elements */ - int *pnEntry, /* Number of objects currently in use */ - int *pnAlloc, /* Current size of the allocation, in elements */ - int *pIdx /* Write the index of a new slot here */ +SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete( + Parse *pParse, /* Parsing and code generating context */ + Table *pTab, /* Table containing the row to be deleted */ + int iDataCur, /* Cursor of table holding data. */ + int iIdxCur, /* First index cursor */ + int *aRegIdx /* Only delete if aRegIdx!=0 && aRegIdx[i]>0 */ ){ - char *z; - if( *pnEntry >= *pnAlloc ){ - void *pNew; - int newSize; - newSize = (*pnAlloc)*2 + initSize; - pNew = sqlite3DbRealloc(db, pArray, newSize*szEntry); - if( pNew==0 ){ - *pIdx = -1; - return pArray; - } - *pnAlloc = sqlite3DbMallocSize(db, pNew)/szEntry; - pArray = pNew; + int i; /* Index loop counter */ + int r1 = -1; /* Register holding an index key */ + int iPartIdxLabel; /* Jump destination for skipping partial index entries */ + Index *pIdx; /* Current index */ + Index *pPrior = 0; /* Prior index */ + Vdbe *v; /* The prepared statement under construction */ + Index *pPk; /* PRIMARY KEY index, or NULL for rowid tables */ + + v = pParse->pVdbe; + pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); + for(i=0, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){ + assert( iIdxCur+i!=iDataCur || pPk==pIdx ); + if( aRegIdx!=0 && aRegIdx[i]==0 ) continue; + if( pIdx==pPk ) continue; + VdbeModuleComment((v, "GenRowIdxDel for %s", pIdx->zName)); + r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 1, + &iPartIdxLabel, pPrior, r1); + sqlite3VdbeAddOp3(v, OP_IdxDelete, iIdxCur+i, r1, + pIdx->uniqNotNull ? pIdx->nKeyCol : pIdx->nColumn); + sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel); + pPrior = pIdx; } - z = (char*)pArray; - memset(&z[*pnEntry * szEntry], 0, szEntry); - *pIdx = *pnEntry; - ++*pnEntry; - return pArray; } /* -** Append a new element to the given IdList. Create a new IdList if -** need be. +** Generate code that will assemble an index key and stores it in register +** regOut. The key with be for index pIdx which is an index on pTab. +** iCur is the index of a cursor open on the pTab table and pointing to +** the entry that needs indexing. If pTab is a WITHOUT ROWID table, then +** iCur must be the cursor of the PRIMARY KEY index. ** -** A new IdList is returned, or NULL if malloc() fails. +** Return a register number which is the first in a block of +** registers that holds the elements of the index key. The +** block of registers has already been deallocated by the time +** this routine returns. +** +** If *piPartIdxLabel is not NULL, fill it in with a label and jump +** to that label if pIdx is a partial index that should be skipped. +** The label should be resolved using sqlite3ResolvePartIdxLabel(). +** A partial index should be skipped if its WHERE clause evaluates +** to false or null. If pIdx is not a partial index, *piPartIdxLabel +** will be set to zero which is an empty label that is ignored by +** sqlite3ResolvePartIdxLabel(). +** +** The pPrior and regPrior parameters are used to implement a cache to +** avoid unnecessary register loads. If pPrior is not NULL, then it is +** a pointer to a different index for which an index key has just been +** computed into register regPrior. If the current pIdx index is generating +** its key into the same sequence of registers and if pPrior and pIdx share +** a column in common, then the register corresponding to that column already +** holds the correct value and the loading of that register is skipped. +** This optimization is helpful when doing a DELETE or an INTEGRITY_CHECK +** on a table with multiple indices, and especially with the ROWID or +** PRIMARY KEY columns of the index. */ -SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3 *db, IdList *pList, Token *pToken){ - int i; - if( pList==0 ){ - pList = sqlite3DbMallocZero(db, sizeof(IdList) ); - if( pList==0 ) return 0; - pList->nAlloc = 0; - } - pList->a = sqlite3ArrayAllocate( - db, - pList->a, - sizeof(pList->a[0]), - 5, - &pList->nId, - &pList->nAlloc, - &i - ); - if( i<0 ){ - sqlite3IdListDelete(db, pList); - return 0; - } - pList->a[i].zName = sqlite3NameFromToken(db, pToken); - return pList; -} +SQLITE_PRIVATE int sqlite3GenerateIndexKey( + Parse *pParse, /* Parsing context */ + Index *pIdx, /* The index for which to generate a key */ + int iDataCur, /* Cursor number from which to take column data */ + int regOut, /* Put the new key into this register if not 0 */ + int prefixOnly, /* Compute only a unique prefix of the key */ + int *piPartIdxLabel, /* OUT: Jump to this label to skip partial index */ + Index *pPrior, /* Previously generated index key */ + int regPrior /* Register holding previous generated key */ +){ + Vdbe *v = pParse->pVdbe; + int j; + Table *pTab = pIdx->pTable; + int regBase; + int nCol; -/* -** Delete an IdList. -*/ -SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3 *db, IdList *pList){ - int i; - if( pList==0 ) return; - for(i=0; inId; i++){ - sqlite3DbFree(db, pList->a[i].zName); + if( piPartIdxLabel ){ + if( pIdx->pPartIdxWhere ){ + *piPartIdxLabel = sqlite3VdbeMakeLabel(v); + pParse->iPartIdxTab = iDataCur; + sqlite3ExprCachePush(pParse); + sqlite3ExprIfFalse(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel, + SQLITE_JUMPIFNULL); + }else{ + *piPartIdxLabel = 0; + } } - sqlite3DbFree(db, pList->a); - sqlite3DbFree(db, pList); + nCol = (prefixOnly && pIdx->uniqNotNull) ? pIdx->nKeyCol : pIdx->nColumn; + regBase = sqlite3GetTempRange(pParse, nCol); + if( pPrior && (regBase!=regPrior || pPrior->pPartIdxWhere) ) pPrior = 0; + for(j=0; jaiColumn[j]==pIdx->aiColumn[j] ) continue; + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pIdx->aiColumn[j], + regBase+j); + /* If the column affinity is REAL but the number is an integer, then it + ** might be stored in the table as an integer (using a compact + ** representation) then converted to REAL by an OP_RealAffinity opcode. + ** But we are getting ready to store this value back into an index, where + ** it should be converted by to INTEGER again. So omit the OP_RealAffinity + ** opcode if it is present */ + sqlite3VdbeDeletePriorOpcode(v, OP_RealAffinity); + } + if( regOut ){ + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol, regOut); + } + sqlite3ReleaseTempRange(pParse, regBase, nCol); + return regBase; } /* -** Return the index in pList of the identifier named zId. Return -1 -** if not found. +** If a prior call to sqlite3GenerateIndexKey() generated a jump-over label +** because it was a partial index, then this routine should be called to +** resolve that label. */ -SQLITE_PRIVATE int sqlite3IdListIndex(IdList *pList, const char *zName){ - int i; - if( pList==0 ) return -1; - for(i=0; inId; i++){ - if( sqlite3StrICmp(pList->a[i].zName, zName)==0 ) return i; +SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse *pParse, int iLabel){ + if( iLabel ){ + sqlite3VdbeResolveLabel(pParse->pVdbe, iLabel); + sqlite3ExprCachePop(pParse); } - return -1; } +/************** End of delete.c **********************************************/ +/************** Begin file func.c ********************************************/ /* -** Expand the space allocated for the given SrcList object by -** creating nExtra new slots beginning at iStart. iStart is zero based. -** New slots are zeroed. -** -** For example, suppose a SrcList initially contains two entries: A,B. -** To append 3 new entries onto the end, do this: +** 2002 February 23 ** -** sqlite3SrcListEnlarge(db, pSrclist, 3, 2); +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** After the call above it would contain: A, B, nil, nil, nil. -** If the iStart argument had been 1 instead of 2, then the result -** would have been: A, nil, nil, nil, B. To prepend the new slots, -** the iStart value would be 0. The result then would -** be: nil, nil, nil, A, B. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** If a memory allocation fails the SrcList is unchanged. The -** db->mallocFailed flag will be set to true. +************************************************************************* +** This file contains the C-language implementations for many of the SQL +** functions of SQLite. (Some function, and in particular the date and +** time functions, are implemented separately.) */ -SQLITE_PRIVATE SrcList *sqlite3SrcListEnlarge( - sqlite3 *db, /* Database connection to notify of OOM errors */ - SrcList *pSrc, /* The SrcList to be enlarged */ - int nExtra, /* Number of new slots to add to pSrc->a[] */ - int iStart /* Index in pSrc->a[] of first new slot */ -){ - int i; - - /* Sanity checking on calling parameters */ - assert( iStart>=0 ); - assert( nExtra>=1 ); - assert( pSrc!=0 ); - assert( iStart<=pSrc->nSrc ); - - /* Allocate additional space if needed */ - if( pSrc->nSrc+nExtra>pSrc->nAlloc ){ - SrcList *pNew; - int nAlloc = pSrc->nSrc+nExtra; - int nGot; - pNew = sqlite3DbRealloc(db, pSrc, - sizeof(*pSrc) + (nAlloc-1)*sizeof(pSrc->a[0]) ); - if( pNew==0 ){ - assert( db->mallocFailed ); - return pSrc; - } - pSrc = pNew; - nGot = (sqlite3DbMallocSize(db, pNew) - sizeof(*pSrc))/sizeof(pSrc->a[0])+1; - pSrc->nAlloc = (u16)nGot; - } - - /* Move existing slots that come after the newly inserted slots - ** out of the way */ - for(i=pSrc->nSrc-1; i>=iStart; i--){ - pSrc->a[i+nExtra] = pSrc->a[i]; - } - pSrc->nSrc += (i16)nExtra; - - /* Zero the newly allocated slots */ - memset(&pSrc->a[iStart], 0, sizeof(pSrc->a[0])*nExtra); - for(i=iStart; ia[i].iCursor = -1; - } - - /* Return a pointer to the enlarged SrcList */ - return pSrc; -} - +/* #include */ +/* #include */ /* -** Append a new table name to the given SrcList. Create a new SrcList if -** need be. A new entry is created in the SrcList even if pTable is NULL. -** -** A SrcList is returned, or NULL if there is an OOM error. The returned -** SrcList might be the same as the SrcList that was input or it might be -** a new one. If an OOM error does occurs, then the prior value of pList -** that is input to this routine is automatically freed. -** -** If pDatabase is not null, it means that the table has an optional -** database name prefix. Like this: "database.table". The pDatabase -** points to the table name and the pTable points to the database name. -** The SrcList.a[].zName field is filled with the table name which might -** come from pTable (if pDatabase is NULL) or from pDatabase. -** SrcList.a[].zDatabase is filled with the database name from pTable, -** or with NULL if no database is specified. -** -** In other words, if call like this: -** -** sqlite3SrcListAppend(D,A,B,0); -** -** Then B is a table name and the database name is unspecified. If called -** like this: -** -** sqlite3SrcListAppend(D,A,B,C); -** -** Then C is the table name and B is the database name. If C is defined -** then so is B. In other words, we never have a case where: -** -** sqlite3SrcListAppend(D,A,0,C); -** -** Both pTable and pDatabase are assumed to be quoted. They are dequoted -** before being added to the SrcList. +** Return the collating function associated with a function. */ -SQLITE_PRIVATE SrcList *sqlite3SrcListAppend( - sqlite3 *db, /* Connection to notify of malloc failures */ - SrcList *pList, /* Append to this SrcList. NULL creates a new SrcList */ - Token *pTable, /* Table to append */ - Token *pDatabase /* Database of the table */ -){ - struct SrcList_item *pItem; - assert( pDatabase==0 || pTable!=0 ); /* Cannot have C without B */ - if( pList==0 ){ - pList = sqlite3DbMallocZero(db, sizeof(SrcList) ); - if( pList==0 ) return 0; - pList->nAlloc = 1; - } - pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc); - if( db->mallocFailed ){ - sqlite3SrcListDelete(db, pList); - return 0; - } - pItem = &pList->a[pList->nSrc-1]; - if( pDatabase && pDatabase->z==0 ){ - pDatabase = 0; - } - if( pDatabase ){ - Token *pTemp = pDatabase; - pDatabase = pTable; - pTable = pTemp; - } - pItem->zName = sqlite3NameFromToken(db, pTable); - pItem->zDatabase = sqlite3NameFromToken(db, pDatabase); - return pList; +static CollSeq *sqlite3GetFuncCollSeq(sqlite3_context *context){ + VdbeOp *pOp = &context->pVdbe->aOp[context->iOp-1]; + assert( pOp->opcode==OP_CollSeq ); + assert( pOp->p4type==P4_COLLSEQ ); + return pOp->p4.pColl; } /* -** Assign VdbeCursor index numbers to all tables in a SrcList +** Indicate that the accumulator load should be skipped on this +** iteration of the aggregate loop. */ -SQLITE_PRIVATE void sqlite3SrcListAssignCursors(Parse *pParse, SrcList *pList){ - int i; - struct SrcList_item *pItem; - assert(pList || pParse->db->mallocFailed ); - if( pList ){ - for(i=0, pItem=pList->a; inSrc; i++, pItem++){ - if( pItem->iCursor>=0 ) break; - pItem->iCursor = pParse->nTab++; - if( pItem->pSelect ){ - sqlite3SrcListAssignCursors(pParse, pItem->pSelect->pSrc); - } - } - } +static void sqlite3SkipAccumulatorLoad(sqlite3_context *context){ + context->skipFlag = 1; } /* -** Delete an entire SrcList including all its substructure. +** Implementation of the non-aggregate min() and max() functions */ -SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3 *db, SrcList *pList){ +static void minmaxFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ int i; - struct SrcList_item *pItem; - if( pList==0 ) return; - for(pItem=pList->a, i=0; inSrc; i++, pItem++){ - sqlite3DbFree(db, pItem->zDatabase); - sqlite3DbFree(db, pItem->zName); - sqlite3DbFree(db, pItem->zAlias); - sqlite3DbFree(db, pItem->zIndex); - sqlite3DeleteTable(db, pItem->pTab); - sqlite3SelectDelete(db, pItem->pSelect); - sqlite3ExprDelete(db, pItem->pOn); - sqlite3IdListDelete(db, pItem->pUsing); - } - sqlite3DbFree(db, pList); -} + int mask; /* 0 for min() or 0xffffffff for max() */ + int iBest; + CollSeq *pColl; -/* -** This routine is called by the parser to add a new term to the -** end of a growing FROM clause. The "p" parameter is the part of -** the FROM clause that has already been constructed. "p" is NULL -** if this is the first term of the FROM clause. pTable and pDatabase -** are the name of the table and database named in the FROM clause term. -** pDatabase is NULL if the database name qualifier is missing - the -** usual case. If the term has a alias, then pAlias points to the -** alias token. If the term is a subquery, then pSubquery is the -** SELECT statement that the subquery encodes. The pTable and -** pDatabase parameters are NULL for subqueries. The pOn and pUsing -** parameters are the content of the ON and USING clauses. -** -** Return a new SrcList which encodes is the FROM with the new -** term added. + assert( argc>1 ); + mask = sqlite3_user_data(context)==0 ? 0 : -1; + pColl = sqlite3GetFuncCollSeq(context); + assert( pColl ); + assert( mask==-1 || mask==0 ); + iBest = 0; + if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; + for(i=1; i=0 ){ + testcase( mask==0 ); + iBest = i; + } + } + sqlite3_result_value(context, argv[iBest]); +} + +/* +** Return the type of the argument. */ -SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm( - Parse *pParse, /* Parsing context */ - SrcList *p, /* The left part of the FROM clause already seen */ - Token *pTable, /* Name of the table to add to the FROM clause */ - Token *pDatabase, /* Name of the database containing pTable */ - Token *pAlias, /* The right-hand side of the AS subexpression */ - Select *pSubquery, /* A subquery used in place of a table name */ - Expr *pOn, /* The ON clause of a join */ - IdList *pUsing /* The USING clause of a join */ +static void typeofFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv ){ - struct SrcList_item *pItem; - sqlite3 *db = pParse->db; - if( !p && (pOn || pUsing) ){ - sqlite3ErrorMsg(pParse, "a JOIN clause is required before %s", - (pOn ? "ON" : "USING") - ); - goto append_from_error; - } - p = sqlite3SrcListAppend(db, p, pTable, pDatabase); - if( p==0 || NEVER(p->nSrc==0) ){ - goto append_from_error; - } - pItem = &p->a[p->nSrc-1]; - assert( pAlias!=0 ); - if( pAlias->n ){ - pItem->zAlias = sqlite3NameFromToken(db, pAlias); + const char *z = 0; + UNUSED_PARAMETER(NotUsed); + switch( sqlite3_value_type(argv[0]) ){ + case SQLITE_INTEGER: z = "integer"; break; + case SQLITE_TEXT: z = "text"; break; + case SQLITE_FLOAT: z = "real"; break; + case SQLITE_BLOB: z = "blob"; break; + default: z = "null"; break; } - pItem->pSelect = pSubquery; - pItem->pOn = pOn; - pItem->pUsing = pUsing; - return p; - - append_from_error: - assert( p==0 ); - sqlite3ExprDelete(db, pOn); - sqlite3IdListDelete(db, pUsing); - sqlite3SelectDelete(db, pSubquery); - return 0; + sqlite3_result_text(context, z, -1, SQLITE_STATIC); } + /* -** Add an INDEXED BY or NOT INDEXED clause to the most recently added -** element of the source-list passed as the second argument. +** Implementation of the length() function */ -SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pIndexedBy){ - assert( pIndexedBy!=0 ); - if( p && ALWAYS(p->nSrc>0) ){ - struct SrcList_item *pItem = &p->a[p->nSrc-1]; - assert( pItem->notIndexed==0 && pItem->zIndex==0 ); - if( pIndexedBy->n==1 && !pIndexedBy->z ){ - /* A "NOT INDEXED" clause was supplied. See parse.y - ** construct "indexed_opt" for details. */ - pItem->notIndexed = 1; - }else{ - pItem->zIndex = sqlite3NameFromToken(pParse->db, pIndexedBy); +static void lengthFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int len; + + assert( argc==1 ); + UNUSED_PARAMETER(argc); + switch( sqlite3_value_type(argv[0]) ){ + case SQLITE_BLOB: + case SQLITE_INTEGER: + case SQLITE_FLOAT: { + sqlite3_result_int(context, sqlite3_value_bytes(argv[0])); + break; + } + case SQLITE_TEXT: { + const unsigned char *z = sqlite3_value_text(argv[0]); + if( z==0 ) return; + len = 0; + while( *z ){ + len++; + SQLITE_SKIP_UTF8(z); + } + sqlite3_result_int(context, len); + break; + } + default: { + sqlite3_result_null(context); + break; } } } /* -** When building up a FROM clause in the parser, the join operator -** is initially attached to the left operand. But the code generator -** expects the join operator to be on the right operand. This routine -** Shifts all join operators from left to right for an entire FROM -** clause. -** -** Example: Suppose the join is like this: -** -** A natural cross join B +** Implementation of the abs() function. ** -** The operator is "natural cross join". The A and B operands are stored -** in p->a[0] and p->a[1], respectively. The parser initially stores the -** operator with A. This routine shifts that operator over to B. +** IMP: R-23979-26855 The abs(X) function returns the absolute value of +** the numeric argument X. */ -SQLITE_PRIVATE void sqlite3SrcListShiftJoinType(SrcList *p){ - if( p && p->a ){ - int i; - for(i=p->nSrc-1; i>0; i--){ - p->a[i].jointype = p->a[i-1].jointype; +static void absFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ + assert( argc==1 ); + UNUSED_PARAMETER(argc); + switch( sqlite3_value_type(argv[0]) ){ + case SQLITE_INTEGER: { + i64 iVal = sqlite3_value_int64(argv[0]); + if( iVal<0 ){ + if( iVal==SMALLEST_INT64 ){ + /* IMP: R-31676-45509 If X is the integer -9223372036854775808 + ** then abs(X) throws an integer overflow error since there is no + ** equivalent positive 64-bit two complement value. */ + sqlite3_result_error(context, "integer overflow", -1); + return; + } + iVal = -iVal; + } + sqlite3_result_int64(context, iVal); + break; + } + case SQLITE_NULL: { + /* IMP: R-37434-19929 Abs(X) returns NULL if X is NULL. */ + sqlite3_result_null(context); + break; + } + default: { + /* Because sqlite3_value_double() returns 0.0 if the argument is not + ** something that can be converted into a number, we have: + ** IMP: R-57326-31541 Abs(X) return 0.0 if X is a string or blob that + ** cannot be converted to a numeric value. + */ + double rVal = sqlite3_value_double(argv[0]); + if( rVal<0 ) rVal = -rVal; + sqlite3_result_double(context, rVal); + break; } - p->a[0].jointype = 0; } } /* -** Begin a transaction +** Implementation of the instr() function. +** +** instr(haystack,needle) finds the first occurrence of needle +** in haystack and returns the number of previous characters plus 1, +** or 0 if needle does not occur within haystack. +** +** If both haystack and needle are BLOBs, then the result is one more than +** the number of bytes in haystack prior to the first occurrence of needle, +** or 0 if needle never occurs in haystack. */ -SQLITE_PRIVATE void sqlite3BeginTransaction(Parse *pParse, int type){ - sqlite3 *db; - Vdbe *v; - int i; +static void instrFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const unsigned char *zHaystack; + const unsigned char *zNeedle; + int nHaystack; + int nNeedle; + int typeHaystack, typeNeedle; + int N = 1; + int isText; - assert( pParse!=0 ); - db = pParse->db; - assert( db!=0 ); -/* if( db->aDb[0].pBt==0 ) return; */ - if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "BEGIN", 0, 0) ){ - return; + UNUSED_PARAMETER(argc); + typeHaystack = sqlite3_value_type(argv[0]); + typeNeedle = sqlite3_value_type(argv[1]); + if( typeHaystack==SQLITE_NULL || typeNeedle==SQLITE_NULL ) return; + nHaystack = sqlite3_value_bytes(argv[0]); + nNeedle = sqlite3_value_bytes(argv[1]); + if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){ + zHaystack = sqlite3_value_blob(argv[0]); + zNeedle = sqlite3_value_blob(argv[1]); + isText = 0; + }else{ + zHaystack = sqlite3_value_text(argv[0]); + zNeedle = sqlite3_value_text(argv[1]); + isText = 1; } - v = sqlite3GetVdbe(pParse); - if( !v ) return; - if( type!=TK_DEFERRED ){ - for(i=0; inDb; i++){ - sqlite3VdbeAddOp2(v, OP_Transaction, i, (type==TK_EXCLUSIVE)+1); - sqlite3VdbeUsesBtree(v, i); - } + while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){ + N++; + do{ + nHaystack--; + zHaystack++; + }while( isText && (zHaystack[0]&0xc0)==0x80 ); } - sqlite3VdbeAddOp2(v, OP_AutoCommit, 0, 0); + if( nNeedle>nHaystack ) N = 0; + sqlite3_result_int(context, N); } /* -** Commit a transaction +** Implementation of the printf() function. */ -SQLITE_PRIVATE void sqlite3CommitTransaction(Parse *pParse){ - sqlite3 *db; - Vdbe *v; +static void printfFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + PrintfArguments x; + StrAccum str; + const char *zFormat; + int n; - assert( pParse!=0 ); - db = pParse->db; - assert( db!=0 ); -/* if( db->aDb[0].pBt==0 ) return; */ - if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "COMMIT", 0, 0) ){ - return; - } - v = sqlite3GetVdbe(pParse); - if( v ){ - sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 0); + if( argc>=1 && (zFormat = (const char*)sqlite3_value_text(argv[0]))!=0 ){ + x.nArg = argc-1; + x.nUsed = 0; + x.apArg = argv+1; + sqlite3StrAccumInit(&str, 0, 0, SQLITE_MAX_LENGTH); + str.db = sqlite3_context_db_handle(context); + sqlite3XPrintf(&str, SQLITE_PRINTF_SQLFUNC, zFormat, &x); + n = str.nChar; + sqlite3_result_text(context, sqlite3StrAccumFinish(&str), n, + SQLITE_DYNAMIC); } } /* -** Rollback a transaction +** Implementation of the substr() function. +** +** substr(x,p1,p2) returns p2 characters of x[] beginning with p1. +** p1 is 1-indexed. So substr(x,1,1) returns the first character +** of x. If x is text, then we actually count UTF-8 characters. +** If x is a blob, then we count bytes. +** +** If p1 is negative, then we begin abs(p1) from the end of x[]. +** +** If p2 is negative, return the p2 characters preceding p1. */ -SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse *pParse){ - sqlite3 *db; - Vdbe *v; +static void substrFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const unsigned char *z; + const unsigned char *z2; + int len; + int p0type; + i64 p1, p2; + int negP2 = 0; - assert( pParse!=0 ); - db = pParse->db; - assert( db!=0 ); -/* if( db->aDb[0].pBt==0 ) return; */ - if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "ROLLBACK", 0, 0) ){ + assert( argc==3 || argc==2 ); + if( sqlite3_value_type(argv[1])==SQLITE_NULL + || (argc==3 && sqlite3_value_type(argv[2])==SQLITE_NULL) + ){ return; } - v = sqlite3GetVdbe(pParse); - if( v ){ - sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 1); + p0type = sqlite3_value_type(argv[0]); + p1 = sqlite3_value_int(argv[1]); + if( p0type==SQLITE_BLOB ){ + len = sqlite3_value_bytes(argv[0]); + z = sqlite3_value_blob(argv[0]); + if( z==0 ) return; + assert( len==sqlite3_value_bytes(argv[0]) ); + }else{ + z = sqlite3_value_text(argv[0]); + if( z==0 ) return; + len = 0; + if( p1<0 ){ + for(z2=z; *z2; len++){ + SQLITE_SKIP_UTF8(z2); + } + } + } + if( argc==3 ){ + p2 = sqlite3_value_int(argv[2]); + if( p2<0 ){ + p2 = -p2; + negP2 = 1; + } + }else{ + p2 = sqlite3_context_db_handle(context)->aLimit[SQLITE_LIMIT_LENGTH]; + } + if( p1<0 ){ + p1 += len; + if( p1<0 ){ + p2 += p1; + if( p2<0 ) p2 = 0; + p1 = 0; + } + }else if( p1>0 ){ + p1--; + }else if( p2>0 ){ + p2--; + } + if( negP2 ){ + p1 -= p2; + if( p1<0 ){ + p2 += p1; + p1 = 0; + } + } + assert( p1>=0 && p2>=0 ); + if( p0type!=SQLITE_BLOB ){ + while( *z && p1 ){ + SQLITE_SKIP_UTF8(z); + p1--; + } + for(z2=z; *z2 && p2; p2--){ + SQLITE_SKIP_UTF8(z2); + } + sqlite3_result_text64(context, (char*)z, z2-z, SQLITE_TRANSIENT, + SQLITE_UTF8); + }else{ + if( p1+p2>len ){ + p2 = len-p1; + if( p2<0 ) p2 = 0; + } + sqlite3_result_blob64(context, (char*)&z[p1], (u64)p2, SQLITE_TRANSIENT); } } /* -** This function is called by the parser when it parses a command to create, -** release or rollback an SQL savepoint. +** Implementation of the round() function */ -SQLITE_PRIVATE void sqlite3Savepoint(Parse *pParse, int op, Token *pName){ - char *zName = sqlite3NameFromToken(pParse->db, pName); - if( zName ){ - Vdbe *v = sqlite3GetVdbe(pParse); -#ifndef SQLITE_OMIT_AUTHORIZATION - static const char * const az[] = { "BEGIN", "RELEASE", "ROLLBACK" }; - assert( !SAVEPOINT_BEGIN && SAVEPOINT_RELEASE==1 && SAVEPOINT_ROLLBACK==2 ); -#endif - if( !v || sqlite3AuthCheck(pParse, SQLITE_SAVEPOINT, az[op], zName, 0) ){ - sqlite3DbFree(pParse->db, zName); +#ifndef SQLITE_OMIT_FLOATING_POINT +static void roundFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ + int n = 0; + double r; + char *zBuf; + assert( argc==1 || argc==2 ); + if( argc==2 ){ + if( SQLITE_NULL==sqlite3_value_type(argv[1]) ) return; + n = sqlite3_value_int(argv[1]); + if( n>30 ) n = 30; + if( n<0 ) n = 0; + } + if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; + r = sqlite3_value_double(argv[0]); + /* If Y==0 and X will fit in a 64-bit int, + ** handle the rounding directly, + ** otherwise use printf. + */ + if( n==0 && r>=0 && rdb; - if( db->aDb[1].pBt==0 && !pParse->explain ){ - int rc; - Btree *pBt; - static const int flags = - SQLITE_OPEN_READWRITE | - SQLITE_OPEN_CREATE | - SQLITE_OPEN_EXCLUSIVE | - SQLITE_OPEN_DELETEONCLOSE | - SQLITE_OPEN_TEMP_DB; - - rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pBt, 0, flags); - if( rc!=SQLITE_OK ){ - sqlite3ErrorMsg(pParse, "unable to open a temporary database " - "file for storing temporary tables"); - pParse->rc = rc; - return 1; - } - db->aDb[1].pBt = pBt; - assert( db->aDb[1].pSchema ); - if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1, 0) ){ - db->mallocFailed = 1; - return 1; +static void *contextMalloc(sqlite3_context *context, i64 nByte){ + char *z; + sqlite3 *db = sqlite3_context_db_handle(context); + assert( nByte>0 ); + testcase( nByte==db->aLimit[SQLITE_LIMIT_LENGTH] ); + testcase( nByte==db->aLimit[SQLITE_LIMIT_LENGTH]+1 ); + if( nByte>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + sqlite3_result_error_toobig(context); + z = 0; + }else{ + z = sqlite3Malloc(nByte); + if( !z ){ + sqlite3_result_error_nomem(context); } } - return 0; + return z; } /* -** Generate VDBE code that will verify the schema cookie and start -** a read-transaction for all named database files. -** -** It is important that all schema cookies be verified and all -** read transactions be started before anything else happens in -** the VDBE program. But this routine can be called after much other -** code has been generated. So here is what we do: -** -** The first time this routine is called, we code an OP_Goto that -** will jump to a subroutine at the end of the program. Then we -** record every database that needs its schema verified in the -** pParse->cookieMask field. Later, after all other code has been -** generated, the subroutine that does the cookie verifications and -** starts the transactions will be coded and the OP_Goto P2 value -** will be made to point to that subroutine. The generation of the -** cookie verification subroutine code happens in sqlite3FinishCoding(). -** -** If iDb<0 then code the OP_Goto only - don't set flag to verify the -** schema on any databases. This can be used to position the OP_Goto -** early in the code, before we know if any database tables will be used. +** Implementation of the upper() and lower() SQL functions. */ -SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - - if( pToplevel->cookieGoto==0 ){ - Vdbe *v = sqlite3GetVdbe(pToplevel); - if( v==0 ) return; /* This only happens if there was a prior error */ - pToplevel->cookieGoto = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0)+1; +static void upperFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ + char *z1; + const char *z2; + int i, n; + UNUSED_PARAMETER(argc); + z2 = (char*)sqlite3_value_text(argv[0]); + n = sqlite3_value_bytes(argv[0]); + /* Verify that the call to _bytes() does not invalidate the _text() pointer */ + assert( z2==(char*)sqlite3_value_text(argv[0]) ); + if( z2 ){ + z1 = contextMalloc(context, ((i64)n)+1); + if( z1 ){ + for(i=0; i=0 ){ - sqlite3 *db = pToplevel->db; - yDbMask mask; - - assert( iDbnDb ); - assert( db->aDb[iDb].pBt!=0 || iDb==1 ); - assert( iDbcookieMask & mask)==0 ){ - pToplevel->cookieMask |= mask; - pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie; - if( !OMIT_TEMPDB && iDb==1 ){ - sqlite3OpenTempDatabase(pToplevel); +} +static void lowerFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ + char *z1; + const char *z2; + int i, n; + UNUSED_PARAMETER(argc); + z2 = (char*)sqlite3_value_text(argv[0]); + n = sqlite3_value_bytes(argv[0]); + /* Verify that the call to _bytes() does not invalidate the _text() pointer */ + assert( z2==(char*)sqlite3_value_text(argv[0]) ); + if( z2 ){ + z1 = contextMalloc(context, ((i64)n)+1); + if( z1 ){ + for(i=0; idb; - int i; - for(i=0; inDb; i++){ - Db *pDb = &db->aDb[i]; - if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zName)) ){ - sqlite3CodeVerifySchema(pParse, i); - } +#define noopFunc versionFunc /* Substitute function - never called */ + +/* +** Implementation of random(). Return a random integer. +*/ +static void randomFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + sqlite_int64 r; + UNUSED_PARAMETER2(NotUsed, NotUsed2); + sqlite3_randomness(sizeof(r), &r); + if( r<0 ){ + /* We need to prevent a random number of 0x8000000000000000 + ** (or -9223372036854775808) since when you do abs() of that + ** number of you get the same value back again. To do this + ** in a way that is testable, mask the sign bit off of negative + ** values, resulting in a positive value. Then take the + ** 2s complement of that positive value. The end result can + ** therefore be no less than -9223372036854775807. + */ + r = -(r & LARGEST_INT64); } + sqlite3_result_int64(context, r); } /* -** Generate VDBE code that prepares for doing an operation that -** might change the database. -** -** This routine starts a new transaction if we are not already within -** a transaction. If we are already within a transaction, then a checkpoint -** is set if the setStatement parameter is true. A checkpoint should -** be set for operations that might fail (due to a constraint) part of -** the way through and which will need to undo some writes without having to -** rollback the whole transaction. For operations where all constraints -** can be checked before any changes are made to the database, it is never -** necessary to undo a write and the checkpoint should not be set. +** Implementation of randomblob(N). Return a random blob +** that is N bytes long. */ -SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse *pParse, int setStatement, int iDb){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - sqlite3CodeVerifySchema(pParse, iDb); - pToplevel->writeMask |= ((yDbMask)1)<isMultiWrite |= setStatement; +static void randomBlob( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int n; + unsigned char *p; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + n = sqlite3_value_int(argv[0]); + if( n<1 ){ + n = 1; + } + p = contextMalloc(context, n); + if( p ){ + sqlite3_randomness(n, p); + sqlite3_result_blob(context, (char*)p, n, sqlite3_free); + } } /* -** Indicate that the statement currently under construction might write -** more than one entry (example: deleting one row then inserting another, -** inserting multiple rows in a table, or inserting a row and index entries.) -** If an abort occurs after some of these writes have completed, then it will -** be necessary to undo the completed writes. +** Implementation of the last_insert_rowid() SQL function. The return +** value is the same as the sqlite3_last_insert_rowid() API function. */ -SQLITE_PRIVATE void sqlite3MultiWrite(Parse *pParse){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - pToplevel->isMultiWrite = 1; +static void last_insert_rowid( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + sqlite3 *db = sqlite3_context_db_handle(context); + UNUSED_PARAMETER2(NotUsed, NotUsed2); + /* IMP: R-51513-12026 The last_insert_rowid() SQL function is a + ** wrapper around the sqlite3_last_insert_rowid() C/C++ interface + ** function. */ + sqlite3_result_int64(context, sqlite3_last_insert_rowid(db)); } -/* -** The code generator calls this routine if is discovers that it is -** possible to abort a statement prior to completion. In order to -** perform this abort without corrupting the database, we need to make -** sure that the statement is protected by a statement transaction. +/* +** Implementation of the changes() SQL function. ** -** Technically, we only need to set the mayAbort flag if the -** isMultiWrite flag was previously set. There is a time dependency -** such that the abort must occur after the multiwrite. This makes -** some statements involving the REPLACE conflict resolution algorithm -** go a little faster. But taking advantage of this time dependency -** makes it more difficult to prove that the code is correct (in -** particular, it prevents us from writing an effective -** implementation of sqlite3AssertMayAbort()) and so we have chosen -** to take the safe route and skip the optimization. +** IMP: R-62073-11209 The changes() SQL function is a wrapper +** around the sqlite3_changes() C/C++ function and hence follows the same +** rules for counting changes. */ -SQLITE_PRIVATE void sqlite3MayAbort(Parse *pParse){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - pToplevel->mayAbort = 1; +static void changes( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + sqlite3 *db = sqlite3_context_db_handle(context); + UNUSED_PARAMETER2(NotUsed, NotUsed2); + sqlite3_result_int(context, sqlite3_changes(db)); } /* -** Code an OP_Halt that causes the vdbe to return an SQLITE_CONSTRAINT -** error. The onError parameter determines which (if any) of the statement -** and/or current transaction is rolled back. +** Implementation of the total_changes() SQL function. The return value is +** the same as the sqlite3_total_changes() API function. */ -SQLITE_PRIVATE void sqlite3HaltConstraint(Parse *pParse, int onError, char *p4, int p4type){ - Vdbe *v = sqlite3GetVdbe(pParse); - if( onError==OE_Abort ){ - sqlite3MayAbort(pParse); - } - sqlite3VdbeAddOp4(v, OP_Halt, SQLITE_CONSTRAINT, onError, 0, p4, p4type); +static void total_changes( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + sqlite3 *db = sqlite3_context_db_handle(context); + UNUSED_PARAMETER2(NotUsed, NotUsed2); + /* IMP: R-52756-41993 This function is a wrapper around the + ** sqlite3_total_changes() C/C++ interface. */ + sqlite3_result_int(context, sqlite3_total_changes(db)); } /* -** Check to see if pIndex uses the collating sequence pColl. Return -** true if it does and false if it does not. +** A structure defining how to do GLOB-style comparisons. */ -#ifndef SQLITE_OMIT_REINDEX -static int collationMatch(const char *zColl, Index *pIndex){ - int i; - assert( zColl!=0 ); - for(i=0; inColumn; i++){ - const char *z = pIndex->azColl[i]; - assert( z!=0 ); - if( 0==sqlite3StrICmp(z, zColl) ){ - return 1; - } - } - return 0; -} +struct compareInfo { + u8 matchAll; + u8 matchOne; + u8 matchSet; + u8 noCase; +}; + +/* +** For LIKE and GLOB matching on EBCDIC machines, assume that every +** character is exactly one byte in size. Also, all characters are +** able to participate in upper-case-to-lower-case mappings in EBCDIC +** whereas only characters less than 0x80 do in ASCII. +*/ +#if defined(SQLITE_EBCDIC) +# define sqlite3Utf8Read(A) (*((*A)++)) +# define GlobUpperToLower(A) A = sqlite3UpperToLower[A] +# define GlobUpperToLowerAscii(A) A = sqlite3UpperToLower[A] +#else +# define GlobUpperToLower(A) if( A<=0x7f ){ A = sqlite3UpperToLower[A]; } +# define GlobUpperToLowerAscii(A) A = sqlite3UpperToLower[A] #endif +static const struct compareInfo globInfo = { '*', '?', '[', 0 }; +/* The correct SQL-92 behavior is for the LIKE operator to ignore +** case. Thus 'a' LIKE 'A' would be true. */ +static const struct compareInfo likeInfoNorm = { '%', '_', 0, 1 }; +/* If SQLITE_CASE_SENSITIVE_LIKE is defined, then the LIKE operator +** is case sensitive causing 'a' LIKE 'A' to be false */ +static const struct compareInfo likeInfoAlt = { '%', '_', 0, 0 }; + /* -** Recompute all indices of pTab that use the collating sequence pColl. -** If pColl==0 then recompute all indices of pTab. +** Compare two UTF-8 strings for equality where the first string can +** potentially be a "glob" or "like" expression. Return true (1) if they +** are the same and false (0) if they are different. +** +** Globbing rules: +** +** '*' Matches any sequence of zero or more characters. +** +** '?' Matches exactly one character. +** +** [...] Matches one character from the enclosed list of +** characters. +** +** [^...] Matches one character not in the enclosed list. +** +** With the [...] and [^...] matching, a ']' character can be included +** in the list by making it the first character after '[' or '^'. A +** range of characters can be specified using '-'. Example: +** "[a-z]" matches any single lower-case letter. To match a '-', make +** it the last character in the list. +** +** Like matching rules: +** +** '%' Matches any sequence of zero or more characters +** +*** '_' Matches any one character +** +** Ec Where E is the "esc" character and c is any other +** character, including '%', '_', and esc, match exactly c. +** +** The comments through this routine usually assume glob matching. +** +** This routine is usually quick, but can be N**2 in the worst case. */ -#ifndef SQLITE_OMIT_REINDEX -static void reindexTable(Parse *pParse, Table *pTab, char const *zColl){ - Index *pIndex; /* An index associated with pTab */ +static int patternCompare( + const u8 *zPattern, /* The glob pattern */ + const u8 *zString, /* The string to compare against the glob */ + const struct compareInfo *pInfo, /* Information about how to do the compare */ + u32 esc /* The escape character */ +){ + u32 c, c2; /* Next pattern and input string chars */ + u32 matchOne = pInfo->matchOne; /* "?" or "_" */ + u32 matchAll = pInfo->matchAll; /* "*" or "%" */ + u32 matchOther; /* "[" or the escape character */ + u8 noCase = pInfo->noCase; /* True if uppercase==lowercase */ + const u8 *zEscaped = 0; /* One past the last escaped input char */ + + /* The GLOB operator does not have an ESCAPE clause. And LIKE does not + ** have the matchSet operator. So we either have to look for one or + ** the other, never both. Hence the single variable matchOther is used + ** to store the one we have to look for. + */ + matchOther = esc ? esc : pInfo->matchSet; + + while( (c = sqlite3Utf8Read(&zPattern))!=0 ){ + if( c==matchAll ){ /* Match "*" */ + /* Skip over multiple "*" characters in the pattern. If there + ** are also "?" characters, skip those as well, but consume a + ** single character of the input string for each "?" skipped */ + while( (c=sqlite3Utf8Read(&zPattern)) == matchAll + || c == matchOne ){ + if( c==matchOne && sqlite3Utf8Read(&zString)==0 ){ + return 0; + } + } + if( c==0 ){ + return 1; /* "*" at the end of the pattern matches */ + }else if( c==matchOther ){ + if( esc ){ + c = sqlite3Utf8Read(&zPattern); + if( c==0 ) return 0; + }else{ + /* "[...]" immediately follows the "*". We have to do a slow + ** recursive search in this case, but it is an unusual case. */ + assert( matchOther<0x80 ); /* '[' is a single-byte character */ + while( *zString + && patternCompare(&zPattern[-1],zString,pInfo,esc)==0 ){ + SQLITE_SKIP_UTF8(zString); + } + return *zString!=0; + } + } - for(pIndex=pTab->pIndex; pIndex; pIndex=pIndex->pNext){ - if( zColl==0 || collationMatch(zColl, pIndex) ){ - int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - sqlite3BeginWriteOperation(pParse, 0, iDb); - sqlite3RefillIndex(pParse, pIndex, -1); + /* At this point variable c contains the first character of the + ** pattern string past the "*". Search in the input string for the + ** first matching character and recursively contine the match from + ** that point. + ** + ** For a case-insensitive search, set variable cx to be the same as + ** c but in the other case and search the input string for either + ** c or cx. + */ + if( c<=0x80 ){ + u32 cx; + if( noCase ){ + cx = sqlite3Toupper(c); + c = sqlite3Tolower(c); + }else{ + cx = c; + } + while( (c2 = *(zString++))!=0 ){ + if( c2!=c && c2!=cx ) continue; + if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; + } + }else{ + while( (c2 = sqlite3Utf8Read(&zString))!=0 ){ + if( c2!=c ) continue; + if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; + } + } + return 0; + } + if( c==matchOther ){ + if( esc ){ + c = sqlite3Utf8Read(&zPattern); + if( c==0 ) return 0; + zEscaped = zPattern; + }else{ + u32 prior_c = 0; + int seen = 0; + int invert = 0; + c = sqlite3Utf8Read(&zString); + if( c==0 ) return 0; + c2 = sqlite3Utf8Read(&zPattern); + if( c2=='^' ){ + invert = 1; + c2 = sqlite3Utf8Read(&zPattern); + } + if( c2==']' ){ + if( c==']' ) seen = 1; + c2 = sqlite3Utf8Read(&zPattern); + } + while( c2 && c2!=']' ){ + if( c2=='-' && zPattern[0]!=']' && zPattern[0]!=0 && prior_c>0 ){ + c2 = sqlite3Utf8Read(&zPattern); + if( c>=prior_c && c<=c2 ) seen = 1; + prior_c = 0; + }else{ + if( c==c2 ){ + seen = 1; + } + prior_c = c2; + } + c2 = sqlite3Utf8Read(&zPattern); + } + if( c2==0 || (seen ^ invert)==0 ){ + return 0; + } + continue; + } + } + c2 = sqlite3Utf8Read(&zString); + if( c==c2 ) continue; + if( noCase && c<0x80 && c2<0x80 && sqlite3Tolower(c)==sqlite3Tolower(c2) ){ + continue; } + if( c==matchOne && zPattern!=zEscaped && c2!=0 ) continue; + return 0; } + return *zString==0; } -#endif /* -** Recompute all indices of all tables in all databases where the -** indices use the collating sequence pColl. If pColl==0 then recompute -** all indices everywhere. +** The sqlite3_strglob() interface. */ -#ifndef SQLITE_OMIT_REINDEX -static void reindexDatabases(Parse *pParse, char const *zColl){ - Db *pDb; /* A single database */ - int iDb; /* The database index number */ - sqlite3 *db = pParse->db; /* The database connection */ - HashElem *k; /* For looping over tables in pDb */ - Table *pTab; /* A table in the database */ - - assert( sqlite3BtreeHoldsAllMutexes(db) ); /* Needed for schema access */ - for(iDb=0, pDb=db->aDb; iDbnDb; iDb++, pDb++){ - assert( pDb!=0 ); - for(k=sqliteHashFirst(&pDb->pSchema->tblHash); k; k=sqliteHashNext(k)){ - pTab = (Table*)sqliteHashData(k); - reindexTable(pParse, pTab, zColl); - } - } +SQLITE_API int sqlite3_strglob(const char *zGlobPattern, const char *zString){ + return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, 0)==0; } + +/* +** Count the number of times that the LIKE operator (or GLOB which is +** just a variation of LIKE) gets called. This is used for testing +** only. +*/ +#ifdef SQLITE_TEST +SQLITE_API int sqlite3_like_count = 0; #endif + /* -** Generate code for the REINDEX command. +** Implementation of the like() SQL function. This function implements +** the build-in LIKE operator. The first argument to the function is the +** pattern and the second argument is the string. So, the SQL statements: ** -** REINDEX -- 1 -** REINDEX -- 2 -** REINDEX ?.? -- 3 -** REINDEX ?.? -- 4 +** A LIKE B ** -** Form 1 causes all indices in all attached databases to be rebuilt. -** Form 2 rebuilds all indices in all databases that use the named -** collating function. Forms 3 and 4 rebuild the named index or all -** indices associated with the named table. +** is implemented as like(B,A). +** +** This same function (with a different compareInfo structure) computes +** the GLOB operator. */ -#ifndef SQLITE_OMIT_REINDEX -SQLITE_PRIVATE void sqlite3Reindex(Parse *pParse, Token *pName1, Token *pName2){ - CollSeq *pColl; /* Collating sequence to be reindexed, or NULL */ - char *z; /* Name of a table or index */ - const char *zDb; /* Name of the database */ - Table *pTab; /* A table in the database */ - Index *pIndex; /* An index associated with pTab */ - int iDb; /* The database index number */ - sqlite3 *db = pParse->db; /* The database connection */ - Token *pObjName; /* Name of the table or index to be reindexed */ +static void likeFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const unsigned char *zA, *zB; + u32 escape = 0; + int nPat; + sqlite3 *db = sqlite3_context_db_handle(context); - /* Read the database schema. If an error occurs, leave an error message - ** and code in pParse and return NULL. */ - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + zB = sqlite3_value_text(argv[0]); + zA = sqlite3_value_text(argv[1]); + + /* Limit the length of the LIKE or GLOB pattern to avoid problems + ** of deep recursion and N*N behavior in patternCompare(). + */ + nPat = sqlite3_value_bytes(argv[0]); + testcase( nPat==db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH] ); + testcase( nPat==db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]+1 ); + if( nPat > db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH] ){ + sqlite3_result_error(context, "LIKE or GLOB pattern too complex", -1); return; } + assert( zB==sqlite3_value_text(argv[0]) ); /* Encoding did not change */ - if( pName1==0 ){ - reindexDatabases(pParse, 0); - return; - }else if( NEVER(pName2==0) || pName2->z==0 ){ - char *zColl; - assert( pName1->z ); - zColl = sqlite3NameFromToken(pParse->db, pName1); - if( !zColl ) return; - pColl = sqlite3FindCollSeq(db, ENC(db), zColl, 0); - if( pColl ){ - reindexDatabases(pParse, zColl); - sqlite3DbFree(db, zColl); + if( argc==3 ){ + /* The escape character string must consist of a single UTF-8 character. + ** Otherwise, return an error. + */ + const unsigned char *zEsc = sqlite3_value_text(argv[2]); + if( zEsc==0 ) return; + if( sqlite3Utf8CharLen((char*)zEsc, -1)!=1 ){ + sqlite3_result_error(context, + "ESCAPE expression must be a single character", -1); return; } - sqlite3DbFree(db, zColl); - } - iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pObjName); - if( iDb<0 ) return; - z = sqlite3NameFromToken(db, pObjName); - if( z==0 ) return; - zDb = db->aDb[iDb].zName; - pTab = sqlite3FindTable(db, z, zDb); - if( pTab ){ - reindexTable(pParse, pTab, 0); - sqlite3DbFree(db, z); - return; + escape = sqlite3Utf8Read(&zEsc); } - pIndex = sqlite3FindIndex(db, z, zDb); - sqlite3DbFree(db, z); - if( pIndex ){ - sqlite3BeginWriteOperation(pParse, 0, iDb); - sqlite3RefillIndex(pParse, pIndex, -1); - return; + if( zA && zB ){ + struct compareInfo *pInfo = sqlite3_user_data(context); +#ifdef SQLITE_TEST + sqlite3_like_count++; +#endif + + sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)); } - sqlite3ErrorMsg(pParse, "unable to identify the object to be reindexed"); } -#endif /* -** Return a dynamicly allocated KeyInfo structure that can be used -** with OP_OpenRead or OP_OpenWrite to access database index pIdx. -** -** If successful, a pointer to the new structure is returned. In this case -** the caller is responsible for calling sqlite3DbFree(db, ) on the returned -** pointer. If an error occurs (out of memory or missing collation -** sequence), NULL is returned and the state of pParse updated to reflect -** the error. +** Implementation of the NULLIF(x,y) function. The result is the first +** argument if the arguments are different. The result is NULL if the +** arguments are equal to each other. */ -SQLITE_PRIVATE KeyInfo *sqlite3IndexKeyinfo(Parse *pParse, Index *pIdx){ - int i; - int nCol = pIdx->nColumn; - int nBytes = sizeof(KeyInfo) + (nCol-1)*sizeof(CollSeq*) + nCol; - sqlite3 *db = pParse->db; - KeyInfo *pKey = (KeyInfo *)sqlite3DbMallocZero(db, nBytes); - - if( pKey ){ - pKey->db = pParse->db; - pKey->aSortOrder = (u8 *)&(pKey->aColl[nCol]); - assert( &pKey->aSortOrder[nCol]==&(((u8 *)pKey)[nBytes]) ); - for(i=0; iazColl[i]; - assert( zColl ); - pKey->aColl[i] = sqlite3LocateCollSeq(pParse, zColl); - pKey->aSortOrder[i] = pIdx->aSortOrder[i]; - } - pKey->nField = (u16)nCol; +static void nullifFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + CollSeq *pColl = sqlite3GetFuncCollSeq(context); + UNUSED_PARAMETER(NotUsed); + if( sqlite3MemCompare(argv[0], argv[1], pColl)!=0 ){ + sqlite3_result_value(context, argv[0]); } +} - if( pParse->nErr ){ - sqlite3DbFree(db, pKey); - pKey = 0; - } - return pKey; +/* +** Implementation of the sqlite_version() function. The result is the version +** of the SQLite library that is running. +*/ +static void versionFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + /* IMP: R-48699-48617 This function is an SQL wrapper around the + ** sqlite3_libversion() C-interface. */ + sqlite3_result_text(context, sqlite3_libversion(), -1, SQLITE_STATIC); } -/************** End of build.c ***********************************************/ -/************** Begin file callback.c ****************************************/ /* -** 2005 May 23 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file contains functions used to access the internal hash tables -** of user defined functions and collation sequences. +** Implementation of the sqlite_source_id() function. The result is a string +** that identifies the particular version of the source code used to build +** SQLite. */ +static void sourceidFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **NotUsed2 +){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + /* IMP: R-24470-31136 This function is an SQL wrapper around the + ** sqlite3_sourceid() C interface. */ + sqlite3_result_text(context, sqlite3_sourceid(), -1, SQLITE_STATIC); +} +/* +** Implementation of the sqlite_log() function. This is a wrapper around +** sqlite3_log(). The return value is NULL. The function exists purely for +** its side-effects. +*/ +static void errlogFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + UNUSED_PARAMETER(argc); + UNUSED_PARAMETER(context); + sqlite3_log(sqlite3_value_int(argv[0]), "%s", sqlite3_value_text(argv[1])); +} /* -** Invoke the 'collation needed' callback to request a collation sequence -** in the encoding enc of name zName, length nName. +** Implementation of the sqlite_compileoption_used() function. +** The result is an integer that identifies if the compiler option +** was used to build SQLite. */ -static void callCollNeeded(sqlite3 *db, int enc, const char *zName){ - assert( !db->xCollNeeded || !db->xCollNeeded16 ); - if( db->xCollNeeded ){ - char *zExternal = sqlite3DbStrDup(db, zName); - if( !zExternal ) return; - db->xCollNeeded(db->pCollNeededArg, db, enc, zExternal); - sqlite3DbFree(db, zExternal); - } -#ifndef SQLITE_OMIT_UTF16 - if( db->xCollNeeded16 ){ - char const *zExternal; - sqlite3_value *pTmp = sqlite3ValueNew(db); - sqlite3ValueSetStr(pTmp, -1, zName, SQLITE_UTF8, SQLITE_STATIC); - zExternal = sqlite3ValueText(pTmp, SQLITE_UTF16NATIVE); - if( zExternal ){ - db->xCollNeeded16(db->pCollNeededArg, db, (int)ENC(db), zExternal); - } - sqlite3ValueFree(pTmp); +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +static void compileoptionusedFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const char *zOptName; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + /* IMP: R-39564-36305 The sqlite_compileoption_used() SQL + ** function is a wrapper around the sqlite3_compileoption_used() C/C++ + ** function. + */ + if( (zOptName = (const char*)sqlite3_value_text(argv[0]))!=0 ){ + sqlite3_result_int(context, sqlite3_compileoption_used(zOptName)); } -#endif } +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ /* -** This routine is called if the collation factory fails to deliver a -** collation function in the best encoding but there may be other versions -** of this collation function (for other text encodings) available. Use one -** of these instead if they exist. Avoid a UTF-8 <-> UTF-16 conversion if -** possible. +** Implementation of the sqlite_compileoption_get() function. +** The result is a string that identifies the compiler options +** used to build SQLite. */ -static int synthCollSeq(sqlite3 *db, CollSeq *pColl){ - CollSeq *pColl2; - char *z = pColl->zName; - int i; - static const u8 aEnc[] = { SQLITE_UTF16BE, SQLITE_UTF16LE, SQLITE_UTF8 }; - for(i=0; i<3; i++){ - pColl2 = sqlite3FindCollSeq(db, aEnc[i], z, 0); - if( pColl2->xCmp!=0 ){ - memcpy(pColl, pColl2, sizeof(CollSeq)); - pColl->xDel = 0; /* Do not copy the destructor */ - return SQLITE_OK; +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +static void compileoptiongetFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int n; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + /* IMP: R-04922-24076 The sqlite_compileoption_get() SQL function + ** is a wrapper around the sqlite3_compileoption_get() C/C++ function. + */ + n = sqlite3_value_int(argv[0]); + sqlite3_result_text(context, sqlite3_compileoption_get(n), -1, SQLITE_STATIC); +} +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ + +/* Array for converting from half-bytes (nybbles) into ASCII hex +** digits. */ +static const char hexdigits[] = { + '0', '1', '2', '3', '4', '5', '6', '7', + '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' +}; + +/* +** Implementation of the QUOTE() function. This function takes a single +** argument. If the argument is numeric, the return value is the same as +** the argument. If the argument is NULL, the return value is the string +** "NULL". Otherwise, the argument is enclosed in single quotes with +** single-quote escapes. +*/ +static void quoteFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ + assert( argc==1 ); + UNUSED_PARAMETER(argc); + switch( sqlite3_value_type(argv[0]) ){ + case SQLITE_FLOAT: { + double r1, r2; + char zBuf[50]; + r1 = sqlite3_value_double(argv[0]); + sqlite3_snprintf(sizeof(zBuf), zBuf, "%!.15g", r1); + sqlite3AtoF(zBuf, &r2, 20, SQLITE_UTF8); + if( r1!=r2 ){ + sqlite3_snprintf(sizeof(zBuf), zBuf, "%!.20e", r1); + } + sqlite3_result_text(context, zBuf, -1, SQLITE_TRANSIENT); + break; + } + case SQLITE_INTEGER: { + sqlite3_result_value(context, argv[0]); + break; + } + case SQLITE_BLOB: { + char *zText = 0; + char const *zBlob = sqlite3_value_blob(argv[0]); + int nBlob = sqlite3_value_bytes(argv[0]); + assert( zBlob==sqlite3_value_blob(argv[0]) ); /* No encoding change */ + zText = (char *)contextMalloc(context, (2*(i64)nBlob)+4); + if( zText ){ + int i; + for(i=0; i>4)&0x0F]; + zText[(i*2)+3] = hexdigits[(zBlob[i])&0x0F]; + } + zText[(nBlob*2)+2] = '\''; + zText[(nBlob*2)+3] = '\0'; + zText[0] = 'X'; + zText[1] = '\''; + sqlite3_result_text(context, zText, -1, SQLITE_TRANSIENT); + sqlite3_free(zText); + } + break; + } + case SQLITE_TEXT: { + int i,j; + u64 n; + const unsigned char *zArg = sqlite3_value_text(argv[0]); + char *z; + + if( zArg==0 ) return; + for(i=0, n=0; zArg[i]; i++){ if( zArg[i]=='\'' ) n++; } + z = contextMalloc(context, ((i64)i)+((i64)n)+3); + if( z ){ + z[0] = '\''; + for(i=0, j=1; zArg[i]; i++){ + z[j++] = zArg[i]; + if( zArg[i]=='\'' ){ + z[j++] = '\''; + } + } + z[j++] = '\''; + z[j] = 0; + sqlite3_result_text(context, z, j, sqlite3_free); + } + break; + } + default: { + assert( sqlite3_value_type(argv[0])==SQLITE_NULL ); + sqlite3_result_text(context, "NULL", 4, SQLITE_STATIC); + break; } } - return SQLITE_ERROR; } /* -** This function is responsible for invoking the collation factory callback -** or substituting a collation sequence of a different encoding when the -** requested collation sequence is not available in the desired encoding. -** -** If it is not NULL, then pColl must point to the database native encoding -** collation sequence with name zName, length nName. -** -** The return value is either the collation sequence to be used in database -** db for collation type name zName, length nName, or NULL, if no collation -** sequence can be found. -** -** See also: sqlite3LocateCollSeq(), sqlite3FindCollSeq() +** The unicode() function. Return the integer unicode code-point value +** for the first character of the input string. */ -SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq( - sqlite3* db, /* The database connection */ - u8 enc, /* The desired encoding for the collating sequence */ - CollSeq *pColl, /* Collating sequence with native encoding, or NULL */ - const char *zName /* Collating sequence name */ +static void unicodeFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - CollSeq *p; - - p = pColl; - if( !p ){ - p = sqlite3FindCollSeq(db, enc, zName, 0); - } - if( !p || !p->xCmp ){ - /* No collation sequence of this type for this encoding is registered. - ** Call the collation factory to see if it can supply us with one. - */ - callCollNeeded(db, enc, zName); - p = sqlite3FindCollSeq(db, enc, zName, 0); - } - if( p && !p->xCmp && synthCollSeq(db, p) ){ - p = 0; - } - assert( !p || p->xCmp ); - return p; + const unsigned char *z = sqlite3_value_text(argv[0]); + (void)argc; + if( z && z[0] ) sqlite3_result_int(context, sqlite3Utf8Read(&z)); } /* -** This routine is called on a collation sequence before it is used to -** check that it is defined. An undefined collation sequence exists when -** a database is loaded that contains references to collation sequences -** that have not been defined by sqlite3_create_collation() etc. -** -** If required, this routine calls the 'collation needed' callback to -** request a definition of the collating sequence. If this doesn't work, -** an equivalent collating sequence that uses a text encoding different -** from the main database is substituted, if one is available. +** The char() function takes zero or more arguments, each of which is +** an integer. It constructs a string where each character of the string +** is the unicode character for the corresponding integer argument. */ -SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *pParse, CollSeq *pColl){ - if( pColl ){ - const char *zName = pColl->zName; - sqlite3 *db = pParse->db; - CollSeq *p = sqlite3GetCollSeq(db, ENC(db), pColl, zName); - if( !p ){ - sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName); - pParse->nErr++; - return SQLITE_ERROR; - } - assert( p==pColl ); +static void charFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + unsigned char *z, *zOut; + int i; + zOut = z = sqlite3_malloc( argc*4+1 ); + if( z==0 ){ + sqlite3_result_error_nomem(context); + return; } - return SQLITE_OK; + for(i=0; i0x10ffff ) x = 0xfffd; + c = (unsigned)(x & 0x1fffff); + if( c<0x00080 ){ + *zOut++ = (u8)(c&0xFF); + }else if( c<0x00800 ){ + *zOut++ = 0xC0 + (u8)((c>>6)&0x1F); + *zOut++ = 0x80 + (u8)(c & 0x3F); + }else if( c<0x10000 ){ + *zOut++ = 0xE0 + (u8)((c>>12)&0x0F); + *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); + *zOut++ = 0x80 + (u8)(c & 0x3F); + }else{ + *zOut++ = 0xF0 + (u8)((c>>18) & 0x07); + *zOut++ = 0x80 + (u8)((c>>12) & 0x3F); + *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); + *zOut++ = 0x80 + (u8)(c & 0x3F); + } \ + } + sqlite3_result_text64(context, (char*)z, zOut-z, sqlite3_free, SQLITE_UTF8); } - - /* -** Locate and return an entry from the db.aCollSeq hash table. If the entry -** specified by zName and nName is not found and parameter 'create' is -** true, then create a new entry. Otherwise return NULL. -** -** Each pointer stored in the sqlite3.aCollSeq hash table contains an -** array of three CollSeq structures. The first is the collation sequence -** prefferred for UTF-8, the second UTF-16le, and the third UTF-16be. -** -** Stored immediately after the three collation sequences is a copy of -** the collation sequence name. A pointer to this string is stored in -** each collation sequence structure. +** The hex() function. Interpret the argument as a blob. Return +** a hexadecimal rendering as text. */ -static CollSeq *findCollSeqEntry( - sqlite3 *db, /* Database connection */ - const char *zName, /* Name of the collating sequence */ - int create /* Create a new entry if true */ +static void hexFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - CollSeq *pColl; - int nName = sqlite3Strlen30(zName); - pColl = sqlite3HashFind(&db->aCollSeq, zName, nName); - - if( 0==pColl && create ){ - pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1 ); - if( pColl ){ - CollSeq *pDel = 0; - pColl[0].zName = (char*)&pColl[3]; - pColl[0].enc = SQLITE_UTF8; - pColl[1].zName = (char*)&pColl[3]; - pColl[1].enc = SQLITE_UTF16LE; - pColl[2].zName = (char*)&pColl[3]; - pColl[2].enc = SQLITE_UTF16BE; - memcpy(pColl[0].zName, zName, nName); - pColl[0].zName[nName] = 0; - pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, nName, pColl); - - /* If a malloc() failure occurred in sqlite3HashInsert(), it will - ** return the pColl pointer to be deleted (because it wasn't added - ** to the hash table). - */ - assert( pDel==0 || pDel==pColl ); - if( pDel!=0 ){ - db->mallocFailed = 1; - sqlite3DbFree(db, pDel); - pColl = 0; - } + int i, n; + const unsigned char *pBlob; + char *zHex, *z; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + pBlob = sqlite3_value_blob(argv[0]); + n = sqlite3_value_bytes(argv[0]); + assert( pBlob==sqlite3_value_blob(argv[0]) ); /* No encoding change */ + z = zHex = contextMalloc(context, ((i64)n)*2 + 1); + if( zHex ){ + for(i=0; i>4)&0xf]; + *(z++) = hexdigits[c&0xf]; } + *z = 0; + sqlite3_result_text(context, zHex, n*2, sqlite3_free); } - return pColl; } /* -** Parameter zName points to a UTF-8 encoded string nName bytes long. -** Return the CollSeq* pointer for the collation sequence named zName -** for the encoding 'enc' from the database 'db'. -** -** If the entry specified is not found and 'create' is true, then create a -** new entry. Otherwise return NULL. -** -** A separate function sqlite3LocateCollSeq() is a wrapper around -** this routine. sqlite3LocateCollSeq() invokes the collation factory -** if necessary and generates an error message if the collating sequence -** cannot be found. -** -** See also: sqlite3LocateCollSeq(), sqlite3GetCollSeq() +** The zeroblob(N) function returns a zero-filled blob of size N bytes. */ -SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq( - sqlite3 *db, - u8 enc, - const char *zName, - int create +static void zeroblobFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - CollSeq *pColl; - if( zName ){ - pColl = findCollSeqEntry(db, zName, create); + i64 n; + sqlite3 *db = sqlite3_context_db_handle(context); + assert( argc==1 ); + UNUSED_PARAMETER(argc); + n = sqlite3_value_int64(argv[0]); + testcase( n==db->aLimit[SQLITE_LIMIT_LENGTH] ); + testcase( n==db->aLimit[SQLITE_LIMIT_LENGTH]+1 ); + if( n>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + sqlite3_result_error_toobig(context); }else{ - pColl = db->pDfltColl; - } - assert( SQLITE_UTF8==1 && SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 ); - assert( enc>=SQLITE_UTF8 && enc<=SQLITE_UTF16BE ); - if( pColl ) pColl += enc-1; - return pColl; -} - -/* During the search for the best function definition, this procedure -** is called to test how well the function passed as the first argument -** matches the request for a function with nArg arguments in a system -** that uses encoding enc. The value returned indicates how well the -** request is matched. A higher value indicates a better match. -** -** The returned value is always between 0 and 6, as follows: -** -** 0: Not a match, or if nArg<0 and the function is has no implementation. -** 1: A variable arguments function that prefers UTF-8 when a UTF-16 -** encoding is requested, or vice versa. -** 2: A variable arguments function that uses UTF-16BE when UTF-16LE is -** requested, or vice versa. -** 3: A variable arguments function using the same text encoding. -** 4: A function with the exact number of arguments requested that -** prefers UTF-8 when a UTF-16 encoding is requested, or vice versa. -** 5: A function with the exact number of arguments requested that -** prefers UTF-16LE when UTF-16BE is requested, or vice versa. -** 6: An exact match. -** -*/ -static int matchQuality(FuncDef *p, int nArg, u8 enc){ - int match = 0; - if( p->nArg==-1 || p->nArg==nArg - || (nArg==-1 && (p->xFunc!=0 || p->xStep!=0)) - ){ - match = 1; - if( p->nArg==nArg || nArg==-1 ){ - match = 4; - } - if( enc==p->iPrefEnc ){ - match += 2; - } - else if( (enc==SQLITE_UTF16LE && p->iPrefEnc==SQLITE_UTF16BE) || - (enc==SQLITE_UTF16BE && p->iPrefEnc==SQLITE_UTF16LE) ){ - match += 1; - } + sqlite3_result_zeroblob(context, (int)n); /* IMP: R-00293-64994 */ } - return match; } /* -** Search a FuncDefHash for a function with the given name. Return -** a pointer to the matching FuncDef if found, or 0 if there is no match. +** The replace() function. Three arguments are all strings: call +** them A, B, and C. The result is also a string which is derived +** from A by replacing every occurrence of B with C. The match +** must be exact. Collating sequences are not used. */ -static FuncDef *functionSearch( - FuncDefHash *pHash, /* Hash table to search */ - int h, /* Hash of the name */ - const char *zFunc, /* Name of function */ - int nFunc /* Number of bytes in zFunc */ +static void replaceFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - FuncDef *p; - for(p=pHash->a[h]; p; p=p->pHash){ - if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 && p->zName[nFunc]==0 ){ - return p; + const unsigned char *zStr; /* The input string A */ + const unsigned char *zPattern; /* The pattern string B */ + const unsigned char *zRep; /* The replacement string C */ + unsigned char *zOut; /* The output */ + int nStr; /* Size of zStr */ + int nPattern; /* Size of zPattern */ + int nRep; /* Size of zRep */ + i64 nOut; /* Maximum size of zOut */ + int loopLimit; /* Last zStr[] that might match zPattern[] */ + int i, j; /* Loop counters */ + + assert( argc==3 ); + UNUSED_PARAMETER(argc); + zStr = sqlite3_value_text(argv[0]); + if( zStr==0 ) return; + nStr = sqlite3_value_bytes(argv[0]); + assert( zStr==sqlite3_value_text(argv[0]) ); /* No encoding change */ + zPattern = sqlite3_value_text(argv[1]); + if( zPattern==0 ){ + assert( sqlite3_value_type(argv[1])==SQLITE_NULL + || sqlite3_context_db_handle(context)->mallocFailed ); + return; + } + if( zPattern[0]==0 ){ + assert( sqlite3_value_type(argv[1])!=SQLITE_NULL ); + sqlite3_result_value(context, argv[0]); + return; + } + nPattern = sqlite3_value_bytes(argv[1]); + assert( zPattern==sqlite3_value_text(argv[1]) ); /* No encoding change */ + zRep = sqlite3_value_text(argv[2]); + if( zRep==0 ) return; + nRep = sqlite3_value_bytes(argv[2]); + assert( zRep==sqlite3_value_text(argv[2]) ); + nOut = nStr + 1; + assert( nOutaLimit[SQLITE_LIMIT_LENGTH] ); + testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); + if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + sqlite3_result_error_toobig(context); + sqlite3_free(zOut); + return; + } + zOld = zOut; + zOut = sqlite3_realloc(zOut, (int)nOut); + if( zOut==0 ){ + sqlite3_result_error_nomem(context); + sqlite3_free(zOld); + return; + } + memcpy(&zOut[j], zRep, nRep); + j += nRep; + i += nPattern-1; } } - return 0; + assert( j+nStr-i+1==nOut ); + memcpy(&zOut[j], &zStr[i], nStr-i); + j += nStr - i; + assert( j<=nOut ); + zOut[j] = 0; + sqlite3_result_text(context, (char*)zOut, j, sqlite3_free); } /* -** Insert a new FuncDef into a FuncDefHash hash table. +** Implementation of the TRIM(), LTRIM(), and RTRIM() functions. +** The userdata is 0x1 for left trim, 0x2 for right trim, 0x3 for both. */ -SQLITE_PRIVATE void sqlite3FuncDefInsert( - FuncDefHash *pHash, /* The hash table into which to insert */ - FuncDef *pDef /* The function definition to insert */ +static void trimFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - FuncDef *pOther; - int nName = sqlite3Strlen30(pDef->zName); - u8 c1 = (u8)pDef->zName[0]; - int h = (sqlite3UpperToLower[c1] + nName) % ArraySize(pHash->a); - pOther = functionSearch(pHash, h, pDef->zName, nName); - if( pOther ){ - assert( pOther!=pDef && pOther->pNext!=pDef ); - pDef->pNext = pOther->pNext; - pOther->pNext = pDef; + const unsigned char *zIn; /* Input string */ + const unsigned char *zCharSet; /* Set of characters to trim */ + int nIn; /* Number of bytes in input */ + int flags; /* 1: trimleft 2: trimright 3: trim */ + int i; /* Loop counter */ + unsigned char *aLen = 0; /* Length of each character in zCharSet */ + unsigned char **azChar = 0; /* Individual characters in zCharSet */ + int nChar; /* Number of characters in zCharSet */ + + if( sqlite3_value_type(argv[0])==SQLITE_NULL ){ + return; + } + zIn = sqlite3_value_text(argv[0]); + if( zIn==0 ) return; + nIn = sqlite3_value_bytes(argv[0]); + assert( zIn==sqlite3_value_text(argv[0]) ); + if( argc==1 ){ + static const unsigned char lenOne[] = { 1 }; + static unsigned char * const azOne[] = { (u8*)" " }; + nChar = 1; + aLen = (u8*)lenOne; + azChar = (unsigned char **)azOne; + zCharSet = 0; + }else if( (zCharSet = sqlite3_value_text(argv[1]))==0 ){ + return; }else{ - pDef->pNext = 0; - pDef->pHash = pHash->a[h]; - pHash->a[h] = pDef; + const unsigned char *z; + for(z=zCharSet, nChar=0; *z; nChar++){ + SQLITE_SKIP_UTF8(z); + } + if( nChar>0 ){ + azChar = contextMalloc(context, ((i64)nChar)*(sizeof(char*)+1)); + if( azChar==0 ){ + return; + } + aLen = (unsigned char*)&azChar[nChar]; + for(z=zCharSet, nChar=0; *z; nChar++){ + azChar[nChar] = (unsigned char *)z; + SQLITE_SKIP_UTF8(z); + aLen[nChar] = (u8)(z - azChar[nChar]); + } + } + } + if( nChar>0 ){ + flags = SQLITE_PTR_TO_INT(sqlite3_user_data(context)); + if( flags & 1 ){ + while( nIn>0 ){ + int len = 0; + for(i=0; i=nChar ) break; + zIn += len; + nIn -= len; + } + } + if( flags & 2 ){ + while( nIn>0 ){ + int len = 0; + for(i=0; i=nChar ) break; + nIn -= len; + } + } + if( zCharSet ){ + sqlite3_free(azChar); + } } + sqlite3_result_text(context, (char*)zIn, nIn, SQLITE_TRANSIENT); } - - + +/* IMP: R-25361-16150 This function is omitted from SQLite by default. It +** is only available if the SQLITE_SOUNDEX compile-time option is used +** when SQLite is built. +*/ +#ifdef SQLITE_SOUNDEX /* -** Locate a user function given a name, a number of arguments and a flag -** indicating whether the function prefers UTF-16 over UTF-8. Return a -** pointer to the FuncDef structure that defines that function, or return -** NULL if the function does not exist. -** -** If the createFlag argument is true, then a new (blank) FuncDef -** structure is created and liked into the "db" structure if a -** no matching function previously existed. When createFlag is true -** and the nArg parameter is -1, then only a function that accepts -** any number of arguments will be returned. -** -** If createFlag is false and nArg is -1, then the first valid -** function found is returned. A function is valid if either xFunc -** or xStep is non-zero. +** Compute the soundex encoding of a word. ** -** If createFlag is false, then a function with the required name and -** number of arguments may be returned even if the eTextRep flag does not -** match that requested. +** IMP: R-59782-00072 The soundex(X) function returns a string that is the +** soundex encoding of the string X. */ -SQLITE_PRIVATE FuncDef *sqlite3FindFunction( - sqlite3 *db, /* An open database */ - const char *zName, /* Name of the function. Not null-terminated */ - int nName, /* Number of characters in the name */ - int nArg, /* Number of arguments. -1 means any number */ - u8 enc, /* Preferred text encoding */ - int createFlag /* Create new entry if true and does not otherwise exist */ +static void soundexFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - FuncDef *p; /* Iterator variable */ - FuncDef *pBest = 0; /* Best match found so far */ - int bestScore = 0; /* Score of best match */ - int h; /* Hash value */ - - - assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE ); - h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % ArraySize(db->aFunc.a); - - /* First search for a match amongst the application-defined functions. - */ - p = functionSearch(&db->aFunc, h, zName, nName); - while( p ){ - int score = matchQuality(p, nArg, enc); - if( score>bestScore ){ - pBest = p; - bestScore = score; - } - p = p->pNext; - } - - /* If no match is found, search the built-in functions. - ** - ** If the SQLITE_PreferBuiltin flag is set, then search the built-in - ** functions even if a prior app-defined function was found. And give - ** priority to built-in functions. - ** - ** Except, if createFlag is true, that means that we are trying to - ** install a new function. Whatever FuncDef structure is returned it will - ** have fields overwritten with new information appropriate for the - ** new function. But the FuncDefs for built-in functions are read-only. - ** So we must not search for built-ins when creating a new function. - */ - if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){ - FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); - bestScore = 0; - p = functionSearch(pHash, h, zName, nName); - while( p ){ - int score = matchQuality(p, nArg, enc); - if( score>bestScore ){ - pBest = p; - bestScore = score; + char zResult[8]; + const u8 *zIn; + int i, j; + static const unsigned char iCode[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 1, 2, 3, 0, 1, 2, 0, 0, 2, 2, 4, 5, 5, 0, + 1, 2, 6, 2, 3, 0, 1, 0, 2, 0, 2, 0, 0, 0, 0, 0, + 0, 0, 1, 2, 3, 0, 1, 2, 0, 0, 2, 2, 4, 5, 5, 0, + 1, 2, 6, 2, 3, 0, 1, 0, 2, 0, 2, 0, 0, 0, 0, 0, + }; + assert( argc==1 ); + zIn = (u8*)sqlite3_value_text(argv[0]); + if( zIn==0 ) zIn = (u8*)""; + for(i=0; zIn[i] && !sqlite3Isalpha(zIn[i]); i++){} + if( zIn[i] ){ + u8 prevcode = iCode[zIn[i]&0x7f]; + zResult[0] = sqlite3Toupper(zIn[i]); + for(j=1; j<4 && zIn[i]; i++){ + int code = iCode[zIn[i]&0x7f]; + if( code>0 ){ + if( code!=prevcode ){ + prevcode = code; + zResult[j++] = code + '0'; + } + }else{ + prevcode = 0; } - p = p->pNext; } + while( j<4 ){ + zResult[j++] = '0'; + } + zResult[j] = 0; + sqlite3_result_text(context, zResult, 4, SQLITE_TRANSIENT); + }else{ + /* IMP: R-64894-50321 The string "?000" is returned if the argument + ** is NULL or contains no ASCII alphabetic characters. */ + sqlite3_result_text(context, "?000", 4, SQLITE_STATIC); } - - /* If the createFlag parameter is true and the search did not reveal an - ** exact match for the name, number of arguments and encoding, then add a - ** new entry to the hash table and return it. - */ - if( createFlag && (bestScore<6 || pBest->nArg!=nArg) && - (pBest = sqlite3DbMallocZero(db, sizeof(*pBest)+nName+1))!=0 ){ - pBest->zName = (char *)&pBest[1]; - pBest->nArg = (u16)nArg; - pBest->iPrefEnc = enc; - memcpy(pBest->zName, zName, nName); - pBest->zName[nName] = 0; - sqlite3FuncDefInsert(&db->aFunc, pBest); - } - - if( pBest && (pBest->xStep || pBest->xFunc || createFlag) ){ - return pBest; - } - return 0; } +#endif /* SQLITE_SOUNDEX */ +#ifndef SQLITE_OMIT_LOAD_EXTENSION /* -** Free all resources held by the schema structure. The void* argument points -** at a Schema struct. This function does not call sqlite3DbFree(db, ) on the -** pointer itself, it just cleans up subsidiary resources (i.e. the contents -** of the schema hash tables). -** -** The Schema.cache_size variable is not cleared. +** A function that loads a shared-library extension then returns NULL. */ -SQLITE_PRIVATE void sqlite3SchemaClear(void *p){ - Hash temp1; - Hash temp2; - HashElem *pElem; - Schema *pSchema = (Schema *)p; - - temp1 = pSchema->tblHash; - temp2 = pSchema->trigHash; - sqlite3HashInit(&pSchema->trigHash); - sqlite3HashClear(&pSchema->idxHash); - for(pElem=sqliteHashFirst(&temp2); pElem; pElem=sqliteHashNext(pElem)){ - sqlite3DeleteTrigger(0, (Trigger*)sqliteHashData(pElem)); - } - sqlite3HashClear(&temp2); - sqlite3HashInit(&pSchema->tblHash); - for(pElem=sqliteHashFirst(&temp1); pElem; pElem=sqliteHashNext(pElem)){ - Table *pTab = sqliteHashData(pElem); - sqlite3DeleteTable(0, pTab); - } - sqlite3HashClear(&temp1); - sqlite3HashClear(&pSchema->fkeyHash); - pSchema->pSeqTab = 0; - if( pSchema->flags & DB_SchemaLoaded ){ - pSchema->iGeneration++; - pSchema->flags &= ~DB_SchemaLoaded; - } -} +static void loadExt(sqlite3_context *context, int argc, sqlite3_value **argv){ + const char *zFile = (const char *)sqlite3_value_text(argv[0]); + const char *zProc; + sqlite3 *db = sqlite3_context_db_handle(context); + char *zErrMsg = 0; -/* -** Find and return the schema associated with a BTree. Create -** a new one if necessary. -*/ -SQLITE_PRIVATE Schema *sqlite3SchemaGet(sqlite3 *db, Btree *pBt){ - Schema * p; - if( pBt ){ - p = (Schema *)sqlite3BtreeSchema(pBt, sizeof(Schema), sqlite3SchemaClear); + if( argc==2 ){ + zProc = (const char *)sqlite3_value_text(argv[1]); }else{ - p = (Schema *)sqlite3DbMallocZero(0, sizeof(Schema)); + zProc = 0; } - if( !p ){ - db->mallocFailed = 1; - }else if ( 0==p->file_format ){ - sqlite3HashInit(&p->tblHash); - sqlite3HashInit(&p->idxHash); - sqlite3HashInit(&p->trigHash); - sqlite3HashInit(&p->fkeyHash); - p->enc = SQLITE_UTF8; + if( zFile && sqlite3_load_extension(db, zFile, zProc, &zErrMsg) ){ + sqlite3_result_error(context, zErrMsg, -1); + sqlite3_free(zErrMsg); } - return p; } +#endif + -/************** End of callback.c ********************************************/ -/************** Begin file delete.c ******************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains C code routines that are called by the parser -** in order to generate code for DELETE FROM statements. +** An instance of the following structure holds the context of a +** sum() or avg() aggregate computation. */ +typedef struct SumCtx SumCtx; +struct SumCtx { + double rSum; /* Floating point sum */ + i64 iSum; /* Integer sum */ + i64 cnt; /* Number of elements summed */ + u8 overflow; /* True if integer overflow seen */ + u8 approx; /* True if non-integer value was input to the sum */ +}; /* -** While a SrcList can in general represent multiple tables and subqueries -** (as in the FROM clause of a SELECT statement) in this case it contains -** the name of a single table, as one might find in an INSERT, DELETE, -** or UPDATE statement. Look up that table in the symbol table and -** return a pointer. Set an error message and return NULL if the table -** name is not found or if any other error occurs. -** -** The following fields are initialized appropriate in pSrc: -** -** pSrc->a[0].pTab Pointer to the Table object -** pSrc->a[0].pIndex Pointer to the INDEXED BY index, if there is one +** Routines used to compute the sum, average, and total. ** +** The SUM() function follows the (broken) SQL standard which means +** that it returns NULL if it sums over no inputs. TOTAL returns +** 0.0 in that case. In addition, TOTAL always returns a float where +** SUM might return an integer if it never encounters a floating point +** value. TOTAL never fails, but SUM might through an exception if +** it overflows an integer. */ -SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse *pParse, SrcList *pSrc){ - struct SrcList_item *pItem = pSrc->a; - Table *pTab; - assert( pItem && pSrc->nSrc==1 ); - pTab = sqlite3LocateTable(pParse, 0, pItem->zName, pItem->zDatabase); - sqlite3DeleteTable(pParse->db, pItem->pTab); - pItem->pTab = pTab; - if( pTab ){ - pTab->nRef++; +static void sumStep(sqlite3_context *context, int argc, sqlite3_value **argv){ + SumCtx *p; + int type; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + p = sqlite3_aggregate_context(context, sizeof(*p)); + type = sqlite3_value_numeric_type(argv[0]); + if( p && type!=SQLITE_NULL ){ + p->cnt++; + if( type==SQLITE_INTEGER ){ + i64 v = sqlite3_value_int64(argv[0]); + p->rSum += v; + if( (p->approx|p->overflow)==0 && sqlite3AddInt64(&p->iSum, v) ){ + p->overflow = 1; + } + }else{ + p->rSum += sqlite3_value_double(argv[0]); + p->approx = 1; + } } - if( sqlite3IndexedByLookup(pParse, pItem) ){ - pTab = 0; +} +static void sumFinalize(sqlite3_context *context){ + SumCtx *p; + p = sqlite3_aggregate_context(context, 0); + if( p && p->cnt>0 ){ + if( p->overflow ){ + sqlite3_result_error(context,"integer overflow",-1); + }else if( p->approx ){ + sqlite3_result_double(context, p->rSum); + }else{ + sqlite3_result_int64(context, p->iSum); + } } - return pTab; +} +static void avgFinalize(sqlite3_context *context){ + SumCtx *p; + p = sqlite3_aggregate_context(context, 0); + if( p && p->cnt>0 ){ + sqlite3_result_double(context, p->rSum/(double)p->cnt); + } +} +static void totalFinalize(sqlite3_context *context){ + SumCtx *p; + p = sqlite3_aggregate_context(context, 0); + /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ + sqlite3_result_double(context, p ? p->rSum : (double)0); } /* -** Check to make sure the given table is writable. If it is not -** writable, generate an error message and return 1. If it is -** writable return 0; +** The following structure keeps track of state information for the +** count() aggregate function. */ -SQLITE_PRIVATE int sqlite3IsReadOnly(Parse *pParse, Table *pTab, int viewOk){ - /* A table is not writable under the following circumstances: - ** - ** 1) It is a virtual table and no implementation of the xUpdate method - ** has been provided, or - ** 2) It is a system table (i.e. sqlite_master), this call is not - ** part of a nested parse and writable_schema pragma has not - ** been specified. - ** - ** In either case leave an error message in pParse and return non-zero. - */ - if( ( IsVirtual(pTab) - && sqlite3GetVTable(pParse->db, pTab)->pMod->pModule->xUpdate==0 ) - || ( (pTab->tabFlags & TF_Readonly)!=0 - && (pParse->db->flags & SQLITE_WriteSchema)==0 - && pParse->nested==0 ) - ){ - sqlite3ErrorMsg(pParse, "table %s may not be modified", pTab->zName); - return 1; - } +typedef struct CountCtx CountCtx; +struct CountCtx { + i64 n; +}; -#ifndef SQLITE_OMIT_VIEW - if( !viewOk && pTab->pSelect ){ - sqlite3ErrorMsg(pParse,"cannot modify %s because it is a view",pTab->zName); - return 1; +/* +** Routines to implement the count() aggregate function. +*/ +static void countStep(sqlite3_context *context, int argc, sqlite3_value **argv){ + CountCtx *p; + p = sqlite3_aggregate_context(context, sizeof(*p)); + if( (argc==0 || SQLITE_NULL!=sqlite3_value_type(argv[0])) && p ){ + p->n++; } + +#ifndef SQLITE_OMIT_DEPRECATED + /* The sqlite3_aggregate_count() function is deprecated. But just to make + ** sure it still operates correctly, verify that its count agrees with our + ** internal count when using count(*) and when the total count can be + ** expressed as a 32-bit integer. */ + assert( argc==1 || p==0 || p->n>0x7fffffff + || p->n==sqlite3_aggregate_count(context) ); #endif - return 0; +} +static void countFinalize(sqlite3_context *context){ + CountCtx *p; + p = sqlite3_aggregate_context(context, 0); + sqlite3_result_int64(context, p ? p->n : 0); } - -#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) /* -** Evaluate a view and store its result in an ephemeral table. The -** pWhere argument is an optional WHERE clause that restricts the -** set of rows in the view that are to be added to the ephemeral table. +** Routines to implement min() and max() aggregate functions. */ -SQLITE_PRIVATE void sqlite3MaterializeView( - Parse *pParse, /* Parsing context */ - Table *pView, /* View definition */ - Expr *pWhere, /* Optional WHERE clause to be added */ - int iCur /* Cursor number for ephemerial table */ +static void minmaxStep( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv ){ - SelectDest dest; - Select *pDup; - sqlite3 *db = pParse->db; + Mem *pArg = (Mem *)argv[0]; + Mem *pBest; + UNUSED_PARAMETER(NotUsed); - pDup = sqlite3SelectDup(db, pView->pSelect, 0); - if( pWhere ){ - SrcList *pFrom; - - pWhere = sqlite3ExprDup(db, pWhere, 0); - pFrom = sqlite3SrcListAppend(db, 0, 0, 0); - if( pFrom ){ - assert( pFrom->nSrc==1 ); - pFrom->a[0].zAlias = sqlite3DbStrDup(db, pView->zName); - pFrom->a[0].pSelect = pDup; - assert( pFrom->a[0].pOn==0 ); - assert( pFrom->a[0].pUsing==0 ); + pBest = (Mem *)sqlite3_aggregate_context(context, sizeof(*pBest)); + if( !pBest ) return; + + if( sqlite3_value_type(argv[0])==SQLITE_NULL ){ + if( pBest->flags ) sqlite3SkipAccumulatorLoad(context); + }else if( pBest->flags ){ + int max; + int cmp; + CollSeq *pColl = sqlite3GetFuncCollSeq(context); + /* This step function is used for both the min() and max() aggregates, + ** the only difference between the two being that the sense of the + ** comparison is inverted. For the max() aggregate, the + ** sqlite3_user_data() function returns (void *)-1. For min() it + ** returns (void *)db, where db is the sqlite3* database pointer. + ** Therefore the next statement sets variable 'max' to 1 for the max() + ** aggregate, or 0 for min(). + */ + max = sqlite3_user_data(context)!=0; + cmp = sqlite3MemCompare(pBest, pArg, pColl); + if( (max && cmp<0) || (!max && cmp>0) ){ + sqlite3VdbeMemCopy(pBest, pArg); }else{ - sqlite3SelectDelete(db, pDup); + sqlite3SkipAccumulatorLoad(context); } - pDup = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0); + }else{ + pBest->db = sqlite3_context_db_handle(context); + sqlite3VdbeMemCopy(pBest, pArg); + } +} +static void minMaxFinalize(sqlite3_context *context){ + sqlite3_value *pRes; + pRes = (sqlite3_value *)sqlite3_aggregate_context(context, 0); + if( pRes ){ + if( pRes->flags ){ + sqlite3_result_value(context, pRes); + } + sqlite3VdbeMemRelease(pRes); } - sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur); - sqlite3Select(pParse, pDup, &dest); - sqlite3SelectDelete(db, pDup); } -#endif /* !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) */ -#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) /* -** Generate an expression tree to implement the WHERE, ORDER BY, -** and LIMIT/OFFSET portion of DELETE and UPDATE statements. -** -** DELETE FROM table_wxyz WHERE a<5 ORDER BY a LIMIT 1; -** \__________________________/ -** pLimitWhere (pInClause) +** group_concat(EXPR, ?SEPARATOR?) */ -SQLITE_PRIVATE Expr *sqlite3LimitWhere( - Parse *pParse, /* The parser context */ - SrcList *pSrc, /* the FROM clause -- which tables to scan */ - Expr *pWhere, /* The WHERE clause. May be null */ - ExprList *pOrderBy, /* The ORDER BY clause. May be null */ - Expr *pLimit, /* The LIMIT clause. May be null */ - Expr *pOffset, /* The OFFSET clause. May be null */ - char *zStmtType /* Either DELETE or UPDATE. For error messages. */ +static void groupConcatStep( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - Expr *pWhereRowid = NULL; /* WHERE rowid .. */ - Expr *pInClause = NULL; /* WHERE rowid IN ( select ) */ - Expr *pSelectRowid = NULL; /* SELECT rowid ... */ - ExprList *pEList = NULL; /* Expression list contaning only pSelectRowid */ - SrcList *pSelectSrc = NULL; /* SELECT rowid FROM x ... (dup of pSrc) */ - Select *pSelect = NULL; /* Complete SELECT tree */ - - /* Check that there isn't an ORDER BY without a LIMIT clause. - */ - if( pOrderBy && (pLimit == 0) ) { - sqlite3ErrorMsg(pParse, "ORDER BY without LIMIT on %s", zStmtType); - pParse->parseError = 1; - goto limit_where_cleanup_2; - } + const char *zVal; + StrAccum *pAccum; + const char *zSep; + int nVal, nSep; + assert( argc==1 || argc==2 ); + if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; + pAccum = (StrAccum*)sqlite3_aggregate_context(context, sizeof(*pAccum)); - /* We only need to generate a select expression if there - ** is a limit/offset term to enforce. - */ - if( pLimit == 0 ) { - /* if pLimit is null, pOffset will always be null as well. */ - assert( pOffset == 0 ); - return pWhere; + if( pAccum ){ + sqlite3 *db = sqlite3_context_db_handle(context); + int firstTerm = pAccum->useMalloc==0; + pAccum->useMalloc = 2; + pAccum->mxAlloc = db->aLimit[SQLITE_LIMIT_LENGTH]; + if( !firstTerm ){ + if( argc==2 ){ + zSep = (char*)sqlite3_value_text(argv[1]); + nSep = sqlite3_value_bytes(argv[1]); + }else{ + zSep = ","; + nSep = 1; + } + if( nSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep); + } + zVal = (char*)sqlite3_value_text(argv[0]); + nVal = sqlite3_value_bytes(argv[0]); + if( zVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal); } - - /* Generate a select expression tree to enforce the limit/offset - ** term for the DELETE or UPDATE statement. For example: - ** DELETE FROM table_a WHERE col1=1 ORDER BY col2 LIMIT 1 OFFSET 1 - ** becomes: - ** DELETE FROM table_a WHERE rowid IN ( - ** SELECT rowid FROM table_a WHERE col1=1 ORDER BY col2 LIMIT 1 OFFSET 1 - ** ); - */ - - pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); - if( pSelectRowid == 0 ) goto limit_where_cleanup_2; - pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid); - if( pEList == 0 ) goto limit_where_cleanup_2; - - /* duplicate the FROM clause as it is needed by both the DELETE/UPDATE tree - ** and the SELECT subtree. */ - pSelectSrc = sqlite3SrcListDup(pParse->db, pSrc, 0); - if( pSelectSrc == 0 ) { - sqlite3ExprListDelete(pParse->db, pEList); - goto limit_where_cleanup_2; +} +static void groupConcatFinalize(sqlite3_context *context){ + StrAccum *pAccum; + pAccum = sqlite3_aggregate_context(context, 0); + if( pAccum ){ + if( pAccum->accError==STRACCUM_TOOBIG ){ + sqlite3_result_error_toobig(context); + }else if( pAccum->accError==STRACCUM_NOMEM ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_text(context, sqlite3StrAccumFinish(pAccum), -1, + sqlite3_free); + } } - - /* generate the SELECT expression tree. */ - pSelect = sqlite3SelectNew(pParse,pEList,pSelectSrc,pWhere,0,0, - pOrderBy,0,pLimit,pOffset); - if( pSelect == 0 ) return 0; - - /* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */ - pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); - if( pWhereRowid == 0 ) goto limit_where_cleanup_1; - pInClause = sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0, 0); - if( pInClause == 0 ) goto limit_where_cleanup_1; - - pInClause->x.pSelect = pSelect; - pInClause->flags |= EP_xIsSelect; - sqlite3ExprSetHeight(pParse, pInClause); - return pInClause; - - /* something went wrong. clean up anything allocated. */ -limit_where_cleanup_1: - sqlite3SelectDelete(pParse->db, pSelect); - return 0; - -limit_where_cleanup_2: - sqlite3ExprDelete(pParse->db, pWhere); - sqlite3ExprListDelete(pParse->db, pOrderBy); - sqlite3ExprDelete(pParse->db, pLimit); - sqlite3ExprDelete(pParse->db, pOffset); - return 0; } -#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) */ /* -** Generate code for a DELETE FROM statement. -** -** DELETE FROM table_wxyz WHERE a<5 AND b NOT NULL; -** \________/ \________________/ -** pTabList pWhere +** This routine does per-connection function registration. Most +** of the built-in functions above are part of the global function set. +** This routine only deals with those that are not global. */ -SQLITE_PRIVATE void sqlite3DeleteFrom( - Parse *pParse, /* The parser context */ - SrcList *pTabList, /* The table from which we should delete things */ - Expr *pWhere /* The WHERE clause. May be null */ -){ - Vdbe *v; /* The virtual database engine */ - Table *pTab; /* The table from which records will be deleted */ - const char *zDb; /* Name of database holding pTab */ - int end, addr = 0; /* A couple addresses of generated code */ - int i; /* Loop counter */ - WhereInfo *pWInfo; /* Information about the WHERE clause */ - Index *pIdx; /* For looping over indices of the table */ - int iCur; /* VDBE Cursor number for pTab */ - sqlite3 *db; /* Main database structure */ - AuthContext sContext; /* Authorization context */ - NameContext sNC; /* Name context to resolve expressions in */ - int iDb; /* Database number */ - int memCnt = -1; /* Memory cell used for change counting */ - int rcauth; /* Value returned by authorization callback */ - -#ifndef SQLITE_OMIT_TRIGGER - int isView; /* True if attempting to delete from a view */ - Trigger *pTrigger; /* List of table triggers, if required */ -#endif - - memset(&sContext, 0, sizeof(sContext)); - db = pParse->db; - if( pParse->nErr || db->mallocFailed ){ - goto delete_from_cleanup; - } - assert( pTabList->nSrc==1 ); - - /* Locate the table which we want to delete. This table has to be - ** put in an SrcList structure because some of the subroutines we - ** will be calling are designed to work with multiple tables and expect - ** an SrcList* parameter instead of just a Table* parameter. - */ - pTab = sqlite3SrcListLookup(pParse, pTabList); - if( pTab==0 ) goto delete_from_cleanup; - - /* Figure out if we have any triggers and if the table being - ** deleted from is a view - */ -#ifndef SQLITE_OMIT_TRIGGER - pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); - isView = pTab->pSelect!=0; -#else -# define pTrigger 0 -# define isView 0 -#endif -#ifdef SQLITE_OMIT_VIEW -# undef isView -# define isView 0 -#endif - - /* If pTab is really a view, make sure it has been initialized. - */ - if( sqlite3ViewGetColumnNames(pParse, pTab) ){ - goto delete_from_cleanup; - } - - if( sqlite3IsReadOnly(pParse, pTab, (pTrigger?1:0)) ){ - goto delete_from_cleanup; - } - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - assert( iDbnDb ); - zDb = db->aDb[iDb].zName; - rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb); - assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE ); - if( rcauth==SQLITE_DENY ){ - goto delete_from_cleanup; - } - assert(!isView || pTrigger); - - /* Assign cursor number to the table and all its indices. - */ - assert( pTabList->nSrc==1 ); - iCur = pTabList->a[0].iCursor = pParse->nTab++; - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - pParse->nTab++; +SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3 *db){ + int rc = sqlite3_overload_function(db, "MATCH", 2); + assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); + if( rc==SQLITE_NOMEM ){ + db->mallocFailed = 1; } +} - /* Start the view context - */ - if( isView ){ - sqlite3AuthContextPush(pParse, &sContext, pTab->zName); +/* +** Set the LIKEOPT flag on the 2-argument function with the given name. +*/ +static void setLikeOptFlag(sqlite3 *db, const char *zName, u8 flagVal){ + FuncDef *pDef; + pDef = sqlite3FindFunction(db, zName, sqlite3Strlen30(zName), + 2, SQLITE_UTF8, 0); + if( ALWAYS(pDef) ){ + pDef->funcFlags |= flagVal; } +} - /* Begin generating code. - */ - v = sqlite3GetVdbe(pParse); - if( v==0 ){ - goto delete_from_cleanup; +/* +** Register the built-in LIKE and GLOB functions. The caseSensitive +** parameter determines whether or not the LIKE operator is case +** sensitive. GLOB is always case sensitive. +*/ +SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3 *db, int caseSensitive){ + struct compareInfo *pInfo; + if( caseSensitive ){ + pInfo = (struct compareInfo*)&likeInfoAlt; + }else{ + pInfo = (struct compareInfo*)&likeInfoNorm; } - if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3CreateFunc(db, "like", 2, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); + sqlite3CreateFunc(db, "like", 3, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); + sqlite3CreateFunc(db, "glob", 2, SQLITE_UTF8, + (struct compareInfo*)&globInfo, likeFunc, 0, 0, 0); + setLikeOptFlag(db, "glob", SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE); + setLikeOptFlag(db, "like", + caseSensitive ? (SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE) : SQLITE_FUNC_LIKE); +} - /* If we are trying to delete from a view, realize that view into - ** a ephemeral table. - */ -#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) - if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iCur); +/* +** pExpr points to an expression which implements a function. If +** it is appropriate to apply the LIKE optimization to that function +** then set aWc[0] through aWc[2] to the wildcard characters and +** return TRUE. If the function is not a LIKE-style function then +** return FALSE. +*/ +SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3 *db, Expr *pExpr, int *pIsNocase, char *aWc){ + FuncDef *pDef; + if( pExpr->op!=TK_FUNCTION + || !pExpr->x.pList + || pExpr->x.pList->nExpr!=2 + ){ + return 0; } -#endif - - /* Resolve the column names in the WHERE clause. - */ - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pParse; - sNC.pSrcList = pTabList; - if( sqlite3ResolveExprNames(&sNC, pWhere) ){ - goto delete_from_cleanup; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + pDef = sqlite3FindFunction(db, pExpr->u.zToken, + sqlite3Strlen30(pExpr->u.zToken), + 2, SQLITE_UTF8, 0); + if( NEVER(pDef==0) || (pDef->funcFlags & SQLITE_FUNC_LIKE)==0 ){ + return 0; } - /* Initialize the counter of the number of rows deleted, if - ** we are counting rows. + /* The memcpy() statement assumes that the wildcard characters are + ** the first three statements in the compareInfo structure. The + ** asserts() that follow verify that assumption */ - if( db->flags & SQLITE_CountRows ){ - memCnt = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt); - } + memcpy(aWc, pDef->pUserData, 3); + assert( (char*)&likeInfoAlt == (char*)&likeInfoAlt.matchAll ); + assert( &((char*)&likeInfoAlt)[1] == (char*)&likeInfoAlt.matchOne ); + assert( &((char*)&likeInfoAlt)[2] == (char*)&likeInfoAlt.matchSet ); + *pIsNocase = (pDef->funcFlags & SQLITE_FUNC_CASE)==0; + return 1; +} -#ifndef SQLITE_OMIT_TRUNCATE_OPTIMIZATION - /* Special case: A DELETE without a WHERE clause deletes everything. - ** It is easier just to erase the whole table. Prior to version 3.6.5, - ** this optimization caused the row change count (the value returned by - ** API function sqlite3_count_changes) to be set incorrectly. */ - if( rcauth==SQLITE_OK && pWhere==0 && !pTrigger && !IsVirtual(pTab) - && 0==sqlite3FkRequired(pParse, pTab, 0, 0) - ){ - assert( !isView ); - sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt, - pTab->zName, P4_STATIC); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - assert( pIdx->pSchema==pTab->pSchema ); - sqlite3VdbeAddOp2(v, OP_Clear, pIdx->tnum, iDb); - } - }else -#endif /* SQLITE_OMIT_TRUNCATE_OPTIMIZATION */ - /* The usual case: There is a WHERE clause so we have to scan through - ** the table and pick which records to delete. +/* +** All of the FuncDef structures in the aBuiltinFunc[] array above +** to the global function hash table. This occurs at start-time (as +** a consequence of calling sqlite3_initialize()). +** +** After this routine runs +*/ +SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void){ + /* + ** The following array holds FuncDef structures for all of the functions + ** defined in this file. + ** + ** The array cannot be constant since changes are made to the + ** FuncDef.pHash elements at start-time. The elements of this array + ** are read-only after initialization is complete. */ - { - int iRowSet = ++pParse->nMem; /* Register for rowset of rows to delete */ - int iRowid = ++pParse->nMem; /* Used for storing rowid values. */ - int regRowid; /* Actual register containing rowids */ - - /* Collect rowids of every row to be deleted. - */ - sqlite3VdbeAddOp2(v, OP_Null, 0, iRowSet); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere,0,WHERE_DUPLICATES_OK); - if( pWInfo==0 ) goto delete_from_cleanup; - regRowid = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iCur, iRowid); - sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, regRowid); - if( db->flags & SQLITE_CountRows ){ - sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1); - } - sqlite3WhereEnd(pWInfo); - - /* Delete every item whose key was written to the list during the - ** database scan. We have to delete items after the scan is complete - ** because deleting an item can change the scan order. */ - end = sqlite3VdbeMakeLabel(v); - - /* Unless this is a view, open cursors for the table we are - ** deleting from and all its indices. If this is a view, then the - ** only effect this statement has is to fire the INSTEAD OF - ** triggers. */ - if( !isView ){ - sqlite3OpenTableAndIndices(pParse, pTab, iCur, OP_OpenWrite); - } - - addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, end, iRowid); - - /* Delete the row */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTab) ){ - const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); - sqlite3VtabMakeWritable(pParse, pTab); - sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iRowid, pVTab, P4_VTAB); - sqlite3VdbeChangeP5(v, OE_Abort); - sqlite3MayAbort(pParse); - }else + static SQLITE_WSD FuncDef aBuiltinFunc[] = { + FUNCTION(ltrim, 1, 1, 0, trimFunc ), + FUNCTION(ltrim, 2, 1, 0, trimFunc ), + FUNCTION(rtrim, 1, 2, 0, trimFunc ), + FUNCTION(rtrim, 2, 2, 0, trimFunc ), + FUNCTION(trim, 1, 3, 0, trimFunc ), + FUNCTION(trim, 2, 3, 0, trimFunc ), + FUNCTION(min, -1, 0, 1, minmaxFunc ), + FUNCTION(min, 0, 0, 1, 0 ), + AGGREGATE2(min, 1, 0, 1, minmaxStep, minMaxFinalize, + SQLITE_FUNC_MINMAX ), + FUNCTION(max, -1, 1, 1, minmaxFunc ), + FUNCTION(max, 0, 1, 1, 0 ), + AGGREGATE2(max, 1, 1, 1, minmaxStep, minMaxFinalize, + SQLITE_FUNC_MINMAX ), + FUNCTION2(typeof, 1, 0, 0, typeofFunc, SQLITE_FUNC_TYPEOF), + FUNCTION2(length, 1, 0, 0, lengthFunc, SQLITE_FUNC_LENGTH), + FUNCTION(instr, 2, 0, 0, instrFunc ), + FUNCTION(substr, 2, 0, 0, substrFunc ), + FUNCTION(substr, 3, 0, 0, substrFunc ), + FUNCTION(printf, -1, 0, 0, printfFunc ), + FUNCTION(unicode, 1, 0, 0, unicodeFunc ), + FUNCTION(char, -1, 0, 0, charFunc ), + FUNCTION(abs, 1, 0, 0, absFunc ), +#ifndef SQLITE_OMIT_FLOATING_POINT + FUNCTION(round, 1, 0, 0, roundFunc ), + FUNCTION(round, 2, 0, 0, roundFunc ), #endif - { - int count = (pParse->nested==0); /* True to count changes */ - sqlite3GenerateRowDelete(pParse, pTab, iCur, iRowid, count, pTrigger, OE_Default); - } - - /* End of the delete loop */ - sqlite3VdbeAddOp2(v, OP_Goto, 0, addr); - sqlite3VdbeResolveLabel(v, end); - - /* Close the cursors open on the table and its indexes. */ - if( !isView && !IsVirtual(pTab) ){ - for(i=1, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){ - sqlite3VdbeAddOp2(v, OP_Close, iCur + i, pIdx->tnum); - } - sqlite3VdbeAddOp1(v, OP_Close, iCur); - } - } + FUNCTION(upper, 1, 0, 0, upperFunc ), + FUNCTION(lower, 1, 0, 0, lowerFunc ), + FUNCTION(coalesce, 1, 0, 0, 0 ), + FUNCTION(coalesce, 0, 0, 0, 0 ), + FUNCTION2(coalesce, -1, 0, 0, noopFunc, SQLITE_FUNC_COALESCE), + FUNCTION(hex, 1, 0, 0, hexFunc ), + FUNCTION2(ifnull, 2, 0, 0, noopFunc, SQLITE_FUNC_COALESCE), + FUNCTION2(unlikely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), + FUNCTION2(likelihood, 2, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), + FUNCTION2(likely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), + VFUNCTION(random, 0, 0, 0, randomFunc ), + VFUNCTION(randomblob, 1, 0, 0, randomBlob ), + FUNCTION(nullif, 2, 0, 1, nullifFunc ), + FUNCTION(sqlite_version, 0, 0, 0, versionFunc ), + FUNCTION(sqlite_source_id, 0, 0, 0, sourceidFunc ), + FUNCTION(sqlite_log, 2, 0, 0, errlogFunc ), +#if SQLITE_USER_AUTHENTICATION + FUNCTION(sqlite_crypt, 2, 0, 0, sqlite3CryptFunc ), +#endif +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS + FUNCTION(sqlite_compileoption_used,1, 0, 0, compileoptionusedFunc ), + FUNCTION(sqlite_compileoption_get, 1, 0, 0, compileoptiongetFunc ), +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ + FUNCTION(quote, 1, 0, 0, quoteFunc ), + VFUNCTION(last_insert_rowid, 0, 0, 0, last_insert_rowid), + VFUNCTION(changes, 0, 0, 0, changes ), + VFUNCTION(total_changes, 0, 0, 0, total_changes ), + FUNCTION(replace, 3, 0, 0, replaceFunc ), + FUNCTION(zeroblob, 1, 0, 0, zeroblobFunc ), + #ifdef SQLITE_SOUNDEX + FUNCTION(soundex, 1, 0, 0, soundexFunc ), + #endif + #ifndef SQLITE_OMIT_LOAD_EXTENSION + FUNCTION(load_extension, 1, 0, 0, loadExt ), + FUNCTION(load_extension, 2, 0, 0, loadExt ), + #endif + AGGREGATE(sum, 1, 0, 0, sumStep, sumFinalize ), + AGGREGATE(total, 1, 0, 0, sumStep, totalFinalize ), + AGGREGATE(avg, 1, 0, 0, sumStep, avgFinalize ), + AGGREGATE2(count, 0, 0, 0, countStep, countFinalize, + SQLITE_FUNC_COUNT ), + AGGREGATE(count, 1, 0, 0, countStep, countFinalize ), + AGGREGATE(group_concat, 1, 0, 0, groupConcatStep, groupConcatFinalize), + AGGREGATE(group_concat, 2, 0, 0, groupConcatStep, groupConcatFinalize), + + LIKEFUNC(glob, 2, &globInfo, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), + #ifdef SQLITE_CASE_SENSITIVE_LIKE + LIKEFUNC(like, 2, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), + LIKEFUNC(like, 3, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), + #else + LIKEFUNC(like, 2, &likeInfoNorm, SQLITE_FUNC_LIKE), + LIKEFUNC(like, 3, &likeInfoNorm, SQLITE_FUNC_LIKE), + #endif + }; - /* Update the sqlite_sequence table by storing the content of the - ** maximum rowid counter values recorded while inserting into - ** autoincrement tables. - */ - if( pParse->nested==0 && pParse->pTriggerTab==0 ){ - sqlite3AutoincrementEnd(pParse); - } + int i; + FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); + FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aBuiltinFunc); - /* Return the number of rows that were deleted. If this routine is - ** generating code because of a call to sqlite3NestedParse(), do not - ** invoke the callback function. - */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ - sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC); + for(i=0; ipVdbe; /* Vdbe */ - int iOld = 0; /* First register in OLD.* array */ - int iLabel; /* Label resolved to end of generated code */ - /* Vdbe is guaranteed to have been allocated by this stage. */ - assert( v ); +/* +** VDBE Calling Convention +** ----------------------- +** +** Example: +** +** For the following INSERT statement: +** +** CREATE TABLE t1(a, b INTEGER PRIMARY KEY, c); +** INSERT INTO t1 VALUES(1, 2, 3.1); +** +** Register (x): 2 (type integer) +** Register (x+1): 1 (type integer) +** Register (x+2): NULL (type NULL) +** Register (x+3): 3.1 (type real) +*/ - /* Seek cursor iCur to the row to delete. If this row no longer exists - ** (this can happen if a trigger program has already deleted it), do - ** not attempt to delete it or fire any DELETE triggers. */ - iLabel = sqlite3VdbeMakeLabel(v); - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, iLabel, iRowid); - - /* If there are any triggers to fire, allocate a range of registers to - ** use for the old.* references in the triggers. */ - if( sqlite3FkRequired(pParse, pTab, 0, 0) || pTrigger ){ - u32 mask; /* Mask of OLD.* columns in use */ - int iCol; /* Iterator used while populating OLD.* */ +/* +** A foreign key constraint requires that the key columns in the parent +** table are collectively subject to a UNIQUE or PRIMARY KEY constraint. +** Given that pParent is the parent table for foreign key constraint pFKey, +** search the schema for a unique index on the parent key columns. +** +** If successful, zero is returned. If the parent key is an INTEGER PRIMARY +** KEY column, then output variable *ppIdx is set to NULL. Otherwise, *ppIdx +** is set to point to the unique index. +** +** If the parent key consists of a single column (the foreign key constraint +** is not a composite foreign key), output variable *paiCol is set to NULL. +** Otherwise, it is set to point to an allocated array of size N, where +** N is the number of columns in the parent key. The first element of the +** array is the index of the child table column that is mapped by the FK +** constraint to the parent table column stored in the left-most column +** of index *ppIdx. The second element of the array is the index of the +** child table column that corresponds to the second left-most column of +** *ppIdx, and so on. +** +** If the required index cannot be found, either because: +** +** 1) The named parent key columns do not exist, or +** +** 2) The named parent key columns do exist, but are not subject to a +** UNIQUE or PRIMARY KEY constraint, or +** +** 3) No parent key columns were provided explicitly as part of the +** foreign key definition, and the parent table does not have a +** PRIMARY KEY, or +** +** 4) No parent key columns were provided explicitly as part of the +** foreign key definition, and the PRIMARY KEY of the parent table +** consists of a different number of columns to the child key in +** the child table. +** +** then non-zero is returned, and a "foreign key mismatch" error loaded +** into pParse. If an OOM error occurs, non-zero is returned and the +** pParse->db->mallocFailed flag is set. +*/ +SQLITE_PRIVATE int sqlite3FkLocateIndex( + Parse *pParse, /* Parse context to store any error in */ + Table *pParent, /* Parent table of FK constraint pFKey */ + FKey *pFKey, /* Foreign key to find index for */ + Index **ppIdx, /* OUT: Unique index on parent table */ + int **paiCol /* OUT: Map of index columns in pFKey */ +){ + Index *pIdx = 0; /* Value to return via *ppIdx */ + int *aiCol = 0; /* Value to return via *paiCol */ + int nCol = pFKey->nCol; /* Number of columns in parent key */ + char *zKey = pFKey->aCol[0].zCol; /* Name of left-most parent key column */ - /* TODO: Could use temporary registers here. Also could attempt to - ** avoid copying the contents of the rowid register. */ - mask = sqlite3TriggerColmask( - pParse, pTrigger, 0, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onconf - ); - mask |= sqlite3FkOldmask(pParse, pTab); - iOld = pParse->nMem+1; - pParse->nMem += (1 + pTab->nCol); + /* The caller is responsible for zeroing output parameters. */ + assert( ppIdx && *ppIdx==0 ); + assert( !paiCol || *paiCol==0 ); + assert( pParse ); - /* Populate the OLD.* pseudo-table register array. These values will be - ** used by any BEFORE and AFTER triggers that exist. */ - sqlite3VdbeAddOp2(v, OP_Copy, iRowid, iOld); - for(iCol=0; iColnCol; iCol++){ - if( mask==0xffffffff || mask&(1<iPKey>=0 ){ + if( !zKey ) return 0; + if( !sqlite3StrICmp(pParent->aCol[pParent->iPKey].zName, zKey) ) return 0; } + }else if( paiCol ){ + assert( nCol>1 ); + aiCol = (int *)sqlite3DbMallocRaw(pParse->db, nCol*sizeof(int)); + if( !aiCol ) return 1; + *paiCol = aiCol; + } - /* Invoke BEFORE DELETE trigger programs. */ - sqlite3CodeRowTrigger(pParse, pTrigger, - TK_DELETE, 0, TRIGGER_BEFORE, pTab, iOld, onconf, iLabel - ); + for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) ){ + /* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number + ** of columns. If each indexed column corresponds to a foreign key + ** column of pFKey, then this index is a winner. */ + + if( zKey==0 ){ + /* If zKey is NULL, then this foreign key is implicitly mapped to + ** the PRIMARY KEY of table pParent. The PRIMARY KEY index may be + ** identified by the test. */ + if( IsPrimaryKeyIndex(pIdx) ){ + if( aiCol ){ + int i; + for(i=0; iaCol[i].iFrom; + } + break; + } + }else{ + /* If zKey is non-NULL, then this foreign key was declared to + ** map to an explicit list of columns in table pParent. Check if this + ** index matches those columns. Also, check that the index uses + ** the default collation sequences for each column. */ + int i, j; + for(i=0; iaiColumn[i]; /* Index of column in parent tbl */ + char *zDfltColl; /* Def. collation for column */ + char *zIdxCol; /* Name of indexed column */ - /* Seek the cursor to the row to be deleted again. It may be that - ** the BEFORE triggers coded above have already removed the row - ** being deleted. Do not attempt to delete the row a second time, and - ** do not fire AFTER triggers. */ - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, iLabel, iRowid); + /* If the index uses a collation sequence that is different from + ** the default collation sequence for the column, this index is + ** unusable. Bail out early in this case. */ + zDfltColl = pParent->aCol[iCol].zColl; + if( !zDfltColl ){ + zDfltColl = "BINARY"; + } + if( sqlite3StrICmp(pIdx->azColl[i], zDfltColl) ) break; - /* Do FK processing. This call checks that any FK constraints that - ** refer to this table (i.e. constraints attached to other tables) - ** are not violated by deleting this row. */ - sqlite3FkCheck(pParse, pTab, iOld, 0); + zIdxCol = pParent->aCol[iCol].zName; + for(j=0; jaCol[j].zCol, zIdxCol)==0 ){ + if( aiCol ) aiCol[i] = pFKey->aCol[j].iFrom; + break; + } + } + if( j==nCol ) break; + } + if( i==nCol ) break; /* pIdx is usable */ + } + } } - /* Delete the index and table entries. Skip this step if pTab is really - ** a view (in which case the only effect of the DELETE statement is to - ** fire the INSTEAD OF triggers). */ - if( pTab->pSelect==0 ){ - sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, 0); - sqlite3VdbeAddOp2(v, OP_Delete, iCur, (count?OPFLAG_NCHANGE:0)); - if( count ){ - sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT); + if( !pIdx ){ + if( !pParse->disableTriggers ){ + sqlite3ErrorMsg(pParse, + "foreign key mismatch - \"%w\" referencing \"%w\"", + pFKey->pFrom->zName, pFKey->zTo); } + sqlite3DbFree(pParse->db, aiCol); + return 1; } - /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to - ** handle rows (possibly in other tables) that refer via a foreign key - ** to the row just deleted. */ - sqlite3FkActions(pParse, pTab, 0, iOld); - - /* Invoke AFTER DELETE trigger programs. */ - sqlite3CodeRowTrigger(pParse, pTrigger, - TK_DELETE, 0, TRIGGER_AFTER, pTab, iOld, onconf, iLabel - ); - - /* Jump here if the row had already been deleted before any BEFORE - ** trigger programs were invoked. Or if a trigger program throws a - ** RAISE(IGNORE) exception. */ - sqlite3VdbeResolveLabel(v, iLabel); + *ppIdx = pIdx; + return 0; } /* -** This routine generates VDBE code that causes the deletion of all -** index entries associated with a single row of a single table. +** This function is called when a row is inserted into or deleted from the +** child table of foreign key constraint pFKey. If an SQL UPDATE is executed +** on the child table of pFKey, this function is invoked twice for each row +** affected - once to "delete" the old row, and then again to "insert" the +** new row. +** +** Each time it is called, this function generates VDBE code to locate the +** row in the parent table that corresponds to the row being inserted into +** or deleted from the child table. If the parent row can be found, no +** special action is taken. Otherwise, if the parent row can *not* be +** found in the parent table: ** -** The VDBE must be in a particular state when this routine is called. -** These are the requirements: +** Operation | FK type | Action taken +** -------------------------------------------------------------------------- +** INSERT immediate Increment the "immediate constraint counter". ** -** 1. A read/write cursor pointing to pTab, the table containing the row -** to be deleted, must be opened as cursor number "iCur". +** DELETE immediate Decrement the "immediate constraint counter". ** -** 2. Read/write cursors for all indices of pTab must be open as -** cursor number iCur+i for the i-th index. +** INSERT deferred Increment the "deferred constraint counter". ** -** 3. The "iCur" cursor must be pointing to the row that is to be -** deleted. -*/ -SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete( - Parse *pParse, /* Parsing and code generating context */ - Table *pTab, /* Table containing the row to be deleted */ - int iCur, /* Cursor number for the table */ - int *aRegIdx /* Only delete if aRegIdx!=0 && aRegIdx[i]>0 */ -){ - int i; - Index *pIdx; - int r1; - - for(i=1, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){ - if( aRegIdx!=0 && aRegIdx[i-1]==0 ) continue; - r1 = sqlite3GenerateIndexKey(pParse, pIdx, iCur, 0, 0); - sqlite3VdbeAddOp3(pParse->pVdbe, OP_IdxDelete, iCur+i, r1,pIdx->nColumn+1); - } -} - -/* -** Generate code that will assemble an index key and put it in register -** regOut. The key with be for index pIdx which is an index on pTab. -** iCur is the index of a cursor open on the pTab table and pointing to -** the entry that needs indexing. +** DELETE deferred Decrement the "deferred constraint counter". ** -** Return a register number which is the first in a block of -** registers that holds the elements of the index key. The -** block of registers has already been deallocated by the time -** this routine returns. +** These operations are identified in the comment at the top of this file +** (fkey.c) as "I.1" and "D.1". */ -SQLITE_PRIVATE int sqlite3GenerateIndexKey( - Parse *pParse, /* Parsing context */ - Index *pIdx, /* The index for which to generate a key */ - int iCur, /* Cursor number for the pIdx->pTable table */ - int regOut, /* Write the new index key to this register */ - int doMakeRec /* Run the OP_MakeRecord instruction if true */ +static void fkLookupParent( + Parse *pParse, /* Parse context */ + int iDb, /* Index of database housing pTab */ + Table *pTab, /* Parent table of FK pFKey */ + Index *pIdx, /* Unique index on parent key columns in pTab */ + FKey *pFKey, /* Foreign key constraint */ + int *aiCol, /* Map from parent key columns to child table columns */ + int regData, /* Address of array containing child table row */ + int nIncr, /* Increment constraint counter by this */ + int isIgnore /* If true, pretend pTab contains all NULL values */ ){ - Vdbe *v = pParse->pVdbe; - int j; - Table *pTab = pIdx->pTable; - int regBase; - int nCol; + int i; /* Iterator variable */ + Vdbe *v = sqlite3GetVdbe(pParse); /* Vdbe to add code to */ + int iCur = pParse->nTab - 1; /* Cursor number to use */ + int iOk = sqlite3VdbeMakeLabel(v); /* jump here if parent key found */ - nCol = pIdx->nColumn; - regBase = sqlite3GetTempRange(pParse, nCol+1); - sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regBase+nCol); - for(j=0; jaiColumn[j]; - if( idx==pTab->iPKey ){ - sqlite3VdbeAddOp2(v, OP_SCopy, regBase+nCol, regBase+j); - }else{ - sqlite3VdbeAddOp3(v, OP_Column, iCur, idx, regBase+j); - sqlite3ColumnDefault(v, pTab, idx, -1); - } + /* If nIncr is less than zero, then check at runtime if there are any + ** outstanding constraints to resolve. If there are not, there is no need + ** to check if deleting this row resolves any outstanding violations. + ** + ** Check if any of the key columns in the child table row are NULL. If + ** any are, then the constraint is considered satisfied. No need to + ** search for a matching row in the parent table. */ + if( nIncr<0 ){ + sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, iOk); + VdbeCoverage(v); + } + for(i=0; inCol; i++){ + int iReg = aiCol[i] + regData + 1; + sqlite3VdbeAddOp2(v, OP_IsNull, iReg, iOk); VdbeCoverage(v); } - if( doMakeRec ){ - const char *zAff; - if( pTab->pSelect || (pParse->db->flags & SQLITE_IdxRealAsInt)!=0 ){ - zAff = 0; + + if( isIgnore==0 ){ + if( pIdx==0 ){ + /* If pIdx is NULL, then the parent key is the INTEGER PRIMARY KEY + ** column of the parent table (table pTab). */ + int iMustBeInt; /* Address of MustBeInt instruction */ + int regTemp = sqlite3GetTempReg(pParse); + + /* Invoke MustBeInt to coerce the child key value to an integer (i.e. + ** apply the affinity of the parent key). If this fails, then there + ** is no matching parent key. Before using MustBeInt, make a copy of + ** the value. Otherwise, the value inserted into the child key column + ** will have INTEGER affinity applied to it, which may not be correct. */ + sqlite3VdbeAddOp2(v, OP_SCopy, aiCol[0]+1+regData, regTemp); + iMustBeInt = sqlite3VdbeAddOp2(v, OP_MustBeInt, regTemp, 0); + VdbeCoverage(v); + + /* If the parent table is the same as the child table, and we are about + ** to increment the constraint-counter (i.e. this is an INSERT operation), + ** then check if the row being inserted matches itself. If so, do not + ** increment the constraint-counter. */ + if( pTab==pFKey->pFrom && nIncr==1 ){ + sqlite3VdbeAddOp3(v, OP_Eq, regData, iOk, regTemp); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + } + + sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenRead); + sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regTemp); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk); + sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); + sqlite3VdbeJumpHere(v, iMustBeInt); + sqlite3ReleaseTempReg(pParse, regTemp); }else{ - zAff = sqlite3IndexAffinityStr(v, pIdx); + int nCol = pFKey->nCol; + int regTemp = sqlite3GetTempRange(pParse, nCol); + int regRec = sqlite3GetTempReg(pParse); + + sqlite3VdbeAddOp3(v, OP_OpenRead, iCur, pIdx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); + for(i=0; ipFrom && nIncr==1 ){ + int iJump = sqlite3VdbeCurrentAddr(v) + nCol + 1; + for(i=0; iaiColumn[i]+1+regData; + assert( aiCol[i]!=pTab->iPKey ); + if( pIdx->aiColumn[i]==pTab->iPKey ){ + /* The parent key is a composite key that includes the IPK column */ + iParent = regData; + } + sqlite3VdbeAddOp3(v, OP_Ne, iChild, iJump, iParent); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL); + } + sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk); + } + + sqlite3VdbeAddOp4(v, OP_MakeRecord, regTemp, nCol, regRec, + sqlite3IndexAffinityStr(v,pIdx), nCol); + sqlite3VdbeAddOp4Int(v, OP_Found, iCur, iOk, regRec, 0); VdbeCoverage(v); + + sqlite3ReleaseTempReg(pParse, regRec); + sqlite3ReleaseTempRange(pParse, regTemp, nCol); } - sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol+1, regOut); - sqlite3VdbeChangeP4(v, -1, zAff, P4_TRANSIENT); } - sqlite3ReleaseTempRange(pParse, regBase, nCol+1); - return regBase; -} - -/************** End of delete.c **********************************************/ -/************** Begin file func.c ********************************************/ -/* -** 2002 February 23 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains the C functions that implement various SQL -** functions of SQLite. -** -** There is only one exported symbol in this file - the function -** sqliteRegisterBuildinFunctions() found at the bottom of the file. -** All other code has file scope. -*/ - -/* -** Return the collating function associated with a function. -*/ -static CollSeq *sqlite3GetFuncCollSeq(sqlite3_context *context){ - return context->pColl; -} - -/* -** Implementation of the non-aggregate min() and max() functions -*/ -static void minmaxFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - int i; - int mask; /* 0 for min() or 0xffffffff for max() */ - int iBest; - CollSeq *pColl; - assert( argc>1 ); - mask = sqlite3_user_data(context)==0 ? 0 : -1; - pColl = sqlite3GetFuncCollSeq(context); - assert( pColl ); - assert( mask==-1 || mask==0 ); - iBest = 0; - if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; - for(i=1; i=0 ){ - testcase( mask==0 ); - iBest = i; + if( !pFKey->isDeferred && !(pParse->db->flags & SQLITE_DeferFKs) + && !pParse->pToplevel + && !pParse->isMultiWrite + ){ + /* Special case: If this is an INSERT statement that will insert exactly + ** one row into the table, raise a constraint immediately instead of + ** incrementing a counter. This is necessary as the VM code is being + ** generated for will not open a statement transaction. */ + assert( nIncr==1 ); + sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_FOREIGNKEY, + OE_Abort, 0, P4_STATIC, P5_ConstraintFK); + }else{ + if( nIncr>0 && pFKey->isDeferred==0 ){ + sqlite3ParseToplevel(pParse)->mayAbort = 1; } + sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); } - sqlite3_result_value(context, argv[iBest]); -} -/* -** Return the type of the argument. -*/ -static void typeofFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - const char *z = 0; - UNUSED_PARAMETER(NotUsed); - switch( sqlite3_value_type(argv[0]) ){ - case SQLITE_INTEGER: z = "integer"; break; - case SQLITE_TEXT: z = "text"; break; - case SQLITE_FLOAT: z = "real"; break; - case SQLITE_BLOB: z = "blob"; break; - default: z = "null"; break; - } - sqlite3_result_text(context, z, -1, SQLITE_STATIC); + sqlite3VdbeResolveLabel(v, iOk); + sqlite3VdbeAddOp1(v, OP_Close, iCur); } /* -** Implementation of the length() function +** Return an Expr object that refers to a memory register corresponding +** to column iCol of table pTab. +** +** regBase is the first of an array of register that contains the data +** for pTab. regBase itself holds the rowid. regBase+1 holds the first +** column. regBase+2 holds the second column, and so forth. */ -static void lengthFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static Expr *exprTableRegister( + Parse *pParse, /* Parsing and code generating context */ + Table *pTab, /* The table whose content is at r[regBase]... */ + int regBase, /* Contents of table pTab */ + i16 iCol /* Which column of pTab is desired */ ){ - int len; + Expr *pExpr; + Column *pCol; + const char *zColl; + sqlite3 *db = pParse->db; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - switch( sqlite3_value_type(argv[0]) ){ - case SQLITE_BLOB: - case SQLITE_INTEGER: - case SQLITE_FLOAT: { - sqlite3_result_int(context, sqlite3_value_bytes(argv[0])); - break; - } - case SQLITE_TEXT: { - const unsigned char *z = sqlite3_value_text(argv[0]); - if( z==0 ) return; - len = 0; - while( *z ){ - len++; - SQLITE_SKIP_UTF8(z); - } - sqlite3_result_int(context, len); - break; - } - default: { - sqlite3_result_null(context); - break; + pExpr = sqlite3Expr(db, TK_REGISTER, 0); + if( pExpr ){ + if( iCol>=0 && iCol!=pTab->iPKey ){ + pCol = &pTab->aCol[iCol]; + pExpr->iTable = regBase + iCol + 1; + pExpr->affinity = pCol->affinity; + zColl = pCol->zColl; + if( zColl==0 ) zColl = db->pDfltColl->zName; + pExpr = sqlite3ExprAddCollateString(pParse, pExpr, zColl); + }else{ + pExpr->iTable = regBase; + pExpr->affinity = SQLITE_AFF_INTEGER; } } + return pExpr; } /* -** Implementation of the abs() function. -** -** IMP: R-23979-26855 The abs(X) function returns the absolute value of -** the numeric argument X. +** Return an Expr object that refers to column iCol of table pTab which +** has cursor iCur. */ -static void absFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ - assert( argc==1 ); - UNUSED_PARAMETER(argc); - switch( sqlite3_value_type(argv[0]) ){ - case SQLITE_INTEGER: { - i64 iVal = sqlite3_value_int64(argv[0]); - if( iVal<0 ){ - if( (iVal<<1)==0 ){ - /* IMP: R-35460-15084 If X is the integer -9223372036854775807 then - ** abs(X) throws an integer overflow error since there is no - ** equivalent positive 64-bit two complement value. */ - sqlite3_result_error(context, "integer overflow", -1); - return; - } - iVal = -iVal; - } - sqlite3_result_int64(context, iVal); - break; - } - case SQLITE_NULL: { - /* IMP: R-37434-19929 Abs(X) returns NULL if X is NULL. */ - sqlite3_result_null(context); - break; - } - default: { - /* Because sqlite3_value_double() returns 0.0 if the argument is not - ** something that can be converted into a number, we have: - ** IMP: R-57326-31541 Abs(X) return 0.0 if X is a string or blob that - ** cannot be converted to a numeric value. - */ - double rVal = sqlite3_value_double(argv[0]); - if( rVal<0 ) rVal = -rVal; - sqlite3_result_double(context, rVal); - break; - } +static Expr *exprTableColumn( + sqlite3 *db, /* The database connection */ + Table *pTab, /* The table whose column is desired */ + int iCursor, /* The open cursor on the table */ + i16 iCol /* The column that is wanted */ +){ + Expr *pExpr = sqlite3Expr(db, TK_COLUMN, 0); + if( pExpr ){ + pExpr->pTab = pTab; + pExpr->iTable = iCursor; + pExpr->iColumn = iCol; } + return pExpr; } /* -** Implementation of the substr() function. +** This function is called to generate code executed when a row is deleted +** from the parent table of foreign key constraint pFKey and, if pFKey is +** deferred, when a row is inserted into the same table. When generating +** code for an SQL UPDATE operation, this function may be called twice - +** once to "delete" the old row and once to "insert" the new row. ** -** substr(x,p1,p2) returns p2 characters of x[] beginning with p1. -** p1 is 1-indexed. So substr(x,1,1) returns the first character -** of x. If x is text, then we actually count UTF-8 characters. -** If x is a blob, then we count bytes. +** The code generated by this function scans through the rows in the child +** table that correspond to the parent table row being deleted or inserted. +** For each child row found, one of the following actions is taken: ** -** If p1 is negative, then we begin abs(p1) from the end of x[]. +** Operation | FK type | Action taken +** -------------------------------------------------------------------------- +** DELETE immediate Increment the "immediate constraint counter". +** Or, if the ON (UPDATE|DELETE) action is RESTRICT, +** throw a "FOREIGN KEY constraint failed" exception. +** +** INSERT immediate Decrement the "immediate constraint counter". +** +** DELETE deferred Increment the "deferred constraint counter". +** Or, if the ON (UPDATE|DELETE) action is RESTRICT, +** throw a "FOREIGN KEY constraint failed" exception. +** +** INSERT deferred Decrement the "deferred constraint counter". ** -** If p2 is negative, return the p2 characters preceeding p1. +** These operations are identified in the comment at the top of this file +** (fkey.c) as "I.2" and "D.2". */ -static void substrFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static void fkScanChildren( + Parse *pParse, /* Parse context */ + SrcList *pSrc, /* The child table to be scanned */ + Table *pTab, /* The parent table */ + Index *pIdx, /* Index on parent covering the foreign key */ + FKey *pFKey, /* The foreign key linking pSrc to pTab */ + int *aiCol, /* Map from pIdx cols to child table cols */ + int regData, /* Parent row data starts here */ + int nIncr /* Amount to increment deferred counter by */ ){ - const unsigned char *z; - const unsigned char *z2; - int len; - int p0type; - i64 p1, p2; - int negP2 = 0; + sqlite3 *db = pParse->db; /* Database handle */ + int i; /* Iterator variable */ + Expr *pWhere = 0; /* WHERE clause to scan with */ + NameContext sNameContext; /* Context used to resolve WHERE clause */ + WhereInfo *pWInfo; /* Context used by sqlite3WhereXXX() */ + int iFkIfZero = 0; /* Address of OP_FkIfZero */ + Vdbe *v = sqlite3GetVdbe(pParse); - assert( argc==3 || argc==2 ); - if( sqlite3_value_type(argv[1])==SQLITE_NULL - || (argc==3 && sqlite3_value_type(argv[2])==SQLITE_NULL) - ){ - return; - } - p0type = sqlite3_value_type(argv[0]); - p1 = sqlite3_value_int(argv[1]); - if( p0type==SQLITE_BLOB ){ - len = sqlite3_value_bytes(argv[0]); - z = sqlite3_value_blob(argv[0]); - if( z==0 ) return; - assert( len==sqlite3_value_bytes(argv[0]) ); - }else{ - z = sqlite3_value_text(argv[0]); - if( z==0 ) return; - len = 0; - if( p1<0 ){ - for(z2=z; *z2; len++){ - SQLITE_SKIP_UTF8(z2); - } - } - } - if( argc==3 ){ - p2 = sqlite3_value_int(argv[2]); - if( p2<0 ){ - p2 = -p2; - negP2 = 1; - } - }else{ - p2 = sqlite3_context_db_handle(context)->aLimit[SQLITE_LIMIT_LENGTH]; - } - if( p1<0 ){ - p1 += len; - if( p1<0 ){ - p2 += p1; - if( p2<0 ) p2 = 0; - p1 = 0; - } - }else if( p1>0 ){ - p1--; - }else if( p2>0 ){ - p2--; - } - if( negP2 ){ - p1 -= p2; - if( p1<0 ){ - p2 += p1; - p1 = 0; - } - } - assert( p1>=0 && p2>=0 ); - if( p0type!=SQLITE_BLOB ){ - while( *z && p1 ){ - SQLITE_SKIP_UTF8(z); - p1--; - } - for(z2=z; *z2 && p2; p2--){ - SQLITE_SKIP_UTF8(z2); - } - sqlite3_result_text(context, (char*)z, (int)(z2-z), SQLITE_TRANSIENT); - }else{ - if( p1+p2>len ){ - p2 = len-p1; - if( p2<0 ) p2 = 0; - } - sqlite3_result_blob(context, (char*)&z[p1], (int)p2, SQLITE_TRANSIENT); + assert( pIdx==0 || pIdx->pTable==pTab ); + assert( pIdx==0 || pIdx->nKeyCol==pFKey->nCol ); + assert( pIdx!=0 || pFKey->nCol==1 ); + assert( pIdx!=0 || HasRowid(pTab) ); + + if( nIncr<0 ){ + iFkIfZero = sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, 0); + VdbeCoverage(v); } -} -/* -** Implementation of the round() function -*/ -#ifndef SQLITE_OMIT_FLOATING_POINT -static void roundFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ - int n = 0; - double r; - char *zBuf; - assert( argc==1 || argc==2 ); - if( argc==2 ){ - if( SQLITE_NULL==sqlite3_value_type(argv[1]) ) return; - n = sqlite3_value_int(argv[1]); - if( n>30 ) n = 30; - if( n<0 ) n = 0; + /* Create an Expr object representing an SQL expression like: + ** + ** = AND = ... + ** + ** The collation sequence used for the comparison should be that of + ** the parent key columns. The affinity of the parent key column should + ** be applied to each child key value before the comparison takes place. + */ + for(i=0; inCol; i++){ + Expr *pLeft; /* Value from parent table row */ + Expr *pRight; /* Column ref to child table */ + Expr *pEq; /* Expression (pLeft = pRight) */ + i16 iCol; /* Index of column in child table */ + const char *zCol; /* Name of column in child table */ + + iCol = pIdx ? pIdx->aiColumn[i] : -1; + pLeft = exprTableRegister(pParse, pTab, regData, iCol); + iCol = aiCol ? aiCol[i] : pFKey->aCol[0].iFrom; + assert( iCol>=0 ); + zCol = pFKey->pFrom->aCol[iCol].zName; + pRight = sqlite3Expr(db, TK_ID, zCol); + pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0); + pWhere = sqlite3ExprAnd(db, pWhere, pEq); } - if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; - r = sqlite3_value_double(argv[0]); - /* If Y==0 and X will fit in a 64-bit int, - ** handle the rounding directly, - ** otherwise use printf. + + /* If the child table is the same as the parent table, then add terms + ** to the WHERE clause that prevent this entry from being scanned. + ** The added WHERE clause terms are like this: + ** + ** $current_rowid!=rowid + ** NOT( $current_a==a AND $current_b==b AND ... ) + ** + ** The first form is used for rowid tables. The second form is used + ** for WITHOUT ROWID tables. In the second form, the primary key is + ** (a,b,...) */ - if( n==0 && r>=0 && rpFrom && nIncr>0 ){ + Expr *pNe; /* Expression (pLeft != pRight) */ + Expr *pLeft; /* Value from parent table row */ + Expr *pRight; /* Column ref to child table */ + if( HasRowid(pTab) ){ + pLeft = exprTableRegister(pParse, pTab, regData, -1); + pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, -1); + pNe = sqlite3PExpr(pParse, TK_NE, pLeft, pRight, 0); + }else{ + Expr *pEq, *pAll = 0; + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + assert( pIdx!=0 ); + for(i=0; inKeyCol; i++){ + i16 iCol = pIdx->aiColumn[i]; + pLeft = exprTableRegister(pParse, pTab, regData, iCol); + pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, iCol); + pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0); + pAll = sqlite3ExprAnd(db, pAll, pEq); + } + pNe = sqlite3PExpr(pParse, TK_NOT, pAll, 0, 0); } - sqlite3AtoF(zBuf, &r, sqlite3Strlen30(zBuf), SQLITE_UTF8); - sqlite3_free(zBuf); + pWhere = sqlite3ExprAnd(db, pWhere, pNe); + } + + /* Resolve the references in the WHERE clause. */ + memset(&sNameContext, 0, sizeof(NameContext)); + sNameContext.pSrcList = pSrc; + sNameContext.pParse = pParse; + sqlite3ResolveExprNames(&sNameContext, pWhere); + + /* Create VDBE to loop through the entries in pSrc that match the WHERE + ** clause. If the constraint is not deferred, throw an exception for + ** each row found. Otherwise, for deferred constraints, increment the + ** deferred constraint counter by nIncr for each row selected. */ + pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0); + if( nIncr>0 && pFKey->isDeferred==0 ){ + sqlite3ParseToplevel(pParse)->mayAbort = 1; + } + sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); + if( pWInfo ){ + sqlite3WhereEnd(pWInfo); + } + + /* Clean up the WHERE clause constructed above. */ + sqlite3ExprDelete(db, pWhere); + if( iFkIfZero ){ + sqlite3VdbeJumpHere(v, iFkIfZero); } - sqlite3_result_double(context, r); } -#endif /* -** Allocate nByte bytes of space using sqlite3_malloc(). If the -** allocation fails, call sqlite3_result_error_nomem() to notify -** the database handle that malloc() has failed and return NULL. -** If nByte is larger than the maximum string or blob length, then -** raise an SQLITE_TOOBIG exception and return NULL. +** This function returns a linked list of FKey objects (connected by +** FKey.pNextTo) holding all children of table pTab. For example, +** given the following schema: +** +** CREATE TABLE t1(a PRIMARY KEY); +** CREATE TABLE t2(b REFERENCES t1(a); +** +** Calling this function with table "t1" as an argument returns a pointer +** to the FKey structure representing the foreign key constraint on table +** "t2". Calling this function with "t2" as the argument would return a +** NULL pointer (as there are no FK constraints for which t2 is the parent +** table). */ -static void *contextMalloc(sqlite3_context *context, i64 nByte){ - char *z; - sqlite3 *db = sqlite3_context_db_handle(context); - assert( nByte>0 ); - testcase( nByte==db->aLimit[SQLITE_LIMIT_LENGTH] ); - testcase( nByte==db->aLimit[SQLITE_LIMIT_LENGTH]+1 ); - if( nByte>db->aLimit[SQLITE_LIMIT_LENGTH] ){ - sqlite3_result_error_toobig(context); - z = 0; - }else{ - z = sqlite3Malloc((int)nByte); - if( !z ){ - sqlite3_result_error_nomem(context); - } - } - return z; +SQLITE_PRIVATE FKey *sqlite3FkReferences(Table *pTab){ + return (FKey *)sqlite3HashFind(&pTab->pSchema->fkeyHash, pTab->zName); } /* -** Implementation of the upper() and lower() SQL functions. +** The second argument is a Trigger structure allocated by the +** fkActionTrigger() routine. This function deletes the Trigger structure +** and all of its sub-components. +** +** The Trigger structure or any of its sub-components may be allocated from +** the lookaside buffer belonging to database handle dbMem. */ -static void upperFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ - char *z1; - const char *z2; - int i, n; - UNUSED_PARAMETER(argc); - z2 = (char*)sqlite3_value_text(argv[0]); - n = sqlite3_value_bytes(argv[0]); - /* Verify that the call to _bytes() does not invalidate the _text() pointer */ - assert( z2==(char*)sqlite3_value_text(argv[0]) ); - if( z2 ){ - z1 = contextMalloc(context, ((i64)n)+1); - if( z1 ){ - memcpy(z1, z2, n+1); - for(i=0; z1[i]; i++){ - z1[i] = (char)sqlite3Toupper(z1[i]); - } - sqlite3_result_text(context, z1, -1, sqlite3_free); - } +static void fkTriggerDelete(sqlite3 *dbMem, Trigger *p){ + if( p ){ + TriggerStep *pStep = p->step_list; + sqlite3ExprDelete(dbMem, pStep->pWhere); + sqlite3ExprListDelete(dbMem, pStep->pExprList); + sqlite3SelectDelete(dbMem, pStep->pSelect); + sqlite3ExprDelete(dbMem, p->pWhen); + sqlite3DbFree(dbMem, p); } } -static void lowerFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ - u8 *z1; - const char *z2; - int i, n; - UNUSED_PARAMETER(argc); - z2 = (char*)sqlite3_value_text(argv[0]); - n = sqlite3_value_bytes(argv[0]); - /* Verify that the call to _bytes() does not invalidate the _text() pointer */ - assert( z2==(char*)sqlite3_value_text(argv[0]) ); - if( z2 ){ - z1 = contextMalloc(context, ((i64)n)+1); - if( z1 ){ - memcpy(z1, z2, n+1); - for(i=0; z1[i]; i++){ - z1[i] = sqlite3Tolower(z1[i]); + +/* +** This function is called to generate code that runs when table pTab is +** being dropped from the database. The SrcList passed as the second argument +** to this function contains a single entry guaranteed to resolve to +** table pTab. +** +** Normally, no code is required. However, if either +** +** (a) The table is the parent table of a FK constraint, or +** (b) The table is the child table of a deferred FK constraint and it is +** determined at runtime that there are outstanding deferred FK +** constraint violations in the database, +** +** then the equivalent of "DELETE FROM " is executed before dropping +** the table from the database. Triggers are disabled while running this +** DELETE, but foreign key actions are not. +*/ +SQLITE_PRIVATE void sqlite3FkDropTable(Parse *pParse, SrcList *pName, Table *pTab){ + sqlite3 *db = pParse->db; + if( (db->flags&SQLITE_ForeignKeys) && !IsVirtual(pTab) && !pTab->pSelect ){ + int iSkip = 0; + Vdbe *v = sqlite3GetVdbe(pParse); + + assert( v ); /* VDBE has already been allocated */ + if( sqlite3FkReferences(pTab)==0 ){ + /* Search for a deferred foreign key constraint for which this table + ** is the child table. If one cannot be found, return without + ** generating any VDBE code. If one can be found, then jump over + ** the entire DELETE if there are no outstanding deferred constraints + ** when this statement is run. */ + FKey *p; + for(p=pTab->pFKey; p; p=p->pNextFrom){ + if( p->isDeferred || (db->flags & SQLITE_DeferFKs) ) break; } - sqlite3_result_text(context, (char *)z1, -1, sqlite3_free); + if( !p ) return; + iSkip = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_FkIfZero, 1, iSkip); VdbeCoverage(v); + } + + pParse->disableTriggers = 1; + sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0); + pParse->disableTriggers = 0; + + /* If the DELETE has generated immediate foreign key constraint + ** violations, halt the VDBE and return an error at this point, before + ** any modifications to the schema are made. This is because statement + ** transactions are not able to rollback schema changes. + ** + ** If the SQLITE_DeferFKs flag is set, then this is not required, as + ** the statement transaction will not be rolled back even if FK + ** constraints are violated. + */ + if( (db->flags & SQLITE_DeferFKs)==0 ){ + sqlite3VdbeAddOp2(v, OP_FkIfZero, 0, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_FOREIGNKEY, + OE_Abort, 0, P4_STATIC, P5_ConstraintFK); + } + + if( iSkip ){ + sqlite3VdbeResolveLabel(v, iSkip); } } } -#if 0 /* This function is never used. */ -/* -** The COALESCE() and IFNULL() functions used to be implemented as shown -** here. But now they are implemented as VDBE code so that unused arguments -** do not have to be computed. This legacy implementation is retained as -** comment. -*/ /* -** Implementation of the IFNULL(), NVL(), and COALESCE() functions. -** All three do the same thing. They return the first non-NULL -** argument. +** The second argument points to an FKey object representing a foreign key +** for which pTab is the child table. An UPDATE statement against pTab +** is currently being processed. For each column of the table that is +** actually updated, the corresponding element in the aChange[] array +** is zero or greater (if a column is unmodified the corresponding element +** is set to -1). If the rowid column is modified by the UPDATE statement +** the bChngRowid argument is non-zero. +** +** This function returns true if any of the columns that are part of the +** child key for FK constraint *p are modified. */ -static void ifnullFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static int fkChildIsModified( + Table *pTab, /* Table being updated */ + FKey *p, /* Foreign key for which pTab is the child */ + int *aChange, /* Array indicating modified columns */ + int bChngRowid /* True if rowid is modified by this update */ ){ int i; - for(i=0; inCol; i++){ + int iChildKey = p->aCol[i].iFrom; + if( aChange[iChildKey]>=0 ) return 1; + if( iChildKey==pTab->iPKey && bChngRowid ) return 1; } + return 0; } -#endif /* NOT USED */ -#define ifnullFunc versionFunc /* Substitute function - never called */ /* -** Implementation of random(). Return a random integer. +** The second argument points to an FKey object representing a foreign key +** for which pTab is the parent table. An UPDATE statement against pTab +** is currently being processed. For each column of the table that is +** actually updated, the corresponding element in the aChange[] array +** is zero or greater (if a column is unmodified the corresponding element +** is set to -1). If the rowid column is modified by the UPDATE statement +** the bChngRowid argument is non-zero. +** +** This function returns true if any of the columns that are part of the +** parent key for FK constraint *p are modified. */ -static void randomFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 +static int fkParentIsModified( + Table *pTab, + FKey *p, + int *aChange, + int bChngRowid ){ - sqlite_int64 r; - UNUSED_PARAMETER2(NotUsed, NotUsed2); - sqlite3_randomness(sizeof(r), &r); - if( r<0 ){ - /* We need to prevent a random number of 0x8000000000000000 - ** (or -9223372036854775808) since when you do abs() of that - ** number of you get the same value back again. To do this - ** in a way that is testable, mask the sign bit off of negative - ** values, resulting in a positive value. Then take the - ** 2s complement of that positive value. The end result can - ** therefore be no less than -9223372036854775807. - */ - r = -(r ^ (((sqlite3_int64)1)<<63)); + int i; + for(i=0; inCol; i++){ + char *zKey = p->aCol[i].zCol; + int iKey; + for(iKey=0; iKeynCol; iKey++){ + if( aChange[iKey]>=0 || (iKey==pTab->iPKey && bChngRowid) ){ + Column *pCol = &pTab->aCol[iKey]; + if( zKey ){ + if( 0==sqlite3StrICmp(pCol->zName, zKey) ) return 1; + }else if( pCol->colFlags & COLFLAG_PRIMKEY ){ + return 1; + } + } + } } - sqlite3_result_int64(context, r); + return 0; } /* -** Implementation of randomblob(N). Return a random blob -** that is N bytes long. +** This function is called when inserting, deleting or updating a row of +** table pTab to generate VDBE code to perform foreign key constraint +** processing for the operation. +** +** For a DELETE operation, parameter regOld is passed the index of the +** first register in an array of (pTab->nCol+1) registers containing the +** rowid of the row being deleted, followed by each of the column values +** of the row being deleted, from left to right. Parameter regNew is passed +** zero in this case. +** +** For an INSERT operation, regOld is passed zero and regNew is passed the +** first register of an array of (pTab->nCol+1) registers containing the new +** row data. +** +** For an UPDATE operation, this function is called twice. Once before +** the original record is deleted from the table using the calling convention +** described for DELETE. Then again after the original record is deleted +** but before the new record is inserted using the INSERT convention. */ -static void randomBlob( - sqlite3_context *context, - int argc, - sqlite3_value **argv +SQLITE_PRIVATE void sqlite3FkCheck( + Parse *pParse, /* Parse context */ + Table *pTab, /* Row is being deleted from this table */ + int regOld, /* Previous row data is stored here */ + int regNew, /* New row data is stored here */ + int *aChange, /* Array indicating UPDATEd columns (or 0) */ + int bChngRowid /* True if rowid is UPDATEd */ ){ - int n; - unsigned char *p; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - n = sqlite3_value_int(argv[0]); - if( n<1 ){ - n = 1; + sqlite3 *db = pParse->db; /* Database handle */ + FKey *pFKey; /* Used to iterate through FKs */ + int iDb; /* Index of database containing pTab */ + const char *zDb; /* Name of database containing pTab */ + int isIgnoreErrors = pParse->disableTriggers; + + /* Exactly one of regOld and regNew should be non-zero. */ + assert( (regOld==0)!=(regNew==0) ); + + /* If foreign-keys are disabled, this function is a no-op. */ + if( (db->flags&SQLITE_ForeignKeys)==0 ) return; + + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + zDb = db->aDb[iDb].zName; + + /* Loop through all the foreign key constraints for which pTab is the + ** child table (the table that the foreign key definition is part of). */ + for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){ + Table *pTo; /* Parent table of foreign key pFKey */ + Index *pIdx = 0; /* Index on key columns in pTo */ + int *aiFree = 0; + int *aiCol; + int iCol; + int i; + int isIgnore = 0; + + if( aChange + && sqlite3_stricmp(pTab->zName, pFKey->zTo)!=0 + && fkChildIsModified(pTab, pFKey, aChange, bChngRowid)==0 + ){ + continue; + } + + /* Find the parent table of this foreign key. Also find a unique index + ** on the parent key columns in the parent table. If either of these + ** schema items cannot be located, set an error in pParse and return + ** early. */ + if( pParse->disableTriggers ){ + pTo = sqlite3FindTable(db, pFKey->zTo, zDb); + }else{ + pTo = sqlite3LocateTable(pParse, 0, pFKey->zTo, zDb); + } + if( !pTo || sqlite3FkLocateIndex(pParse, pTo, pFKey, &pIdx, &aiFree) ){ + assert( isIgnoreErrors==0 || (regOld!=0 && regNew==0) ); + if( !isIgnoreErrors || db->mallocFailed ) return; + if( pTo==0 ){ + /* If isIgnoreErrors is true, then a table is being dropped. In this + ** case SQLite runs a "DELETE FROM xxx" on the table being dropped + ** before actually dropping it in order to check FK constraints. + ** If the parent table of an FK constraint on the current table is + ** missing, behave as if it is empty. i.e. decrement the relevant + ** FK counter for each row of the current table with non-NULL keys. + */ + Vdbe *v = sqlite3GetVdbe(pParse); + int iJump = sqlite3VdbeCurrentAddr(v) + pFKey->nCol + 1; + for(i=0; inCol; i++){ + int iReg = pFKey->aCol[i].iFrom + regOld + 1; + sqlite3VdbeAddOp2(v, OP_IsNull, iReg, iJump); VdbeCoverage(v); + } + sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, -1); + } + continue; + } + assert( pFKey->nCol==1 || (aiFree && pIdx) ); + + if( aiFree ){ + aiCol = aiFree; + }else{ + iCol = pFKey->aCol[0].iFrom; + aiCol = &iCol; + } + for(i=0; inCol; i++){ + if( aiCol[i]==pTab->iPKey ){ + aiCol[i] = -1; + } +#ifndef SQLITE_OMIT_AUTHORIZATION + /* Request permission to read the parent key columns. If the + ** authorization callback returns SQLITE_IGNORE, behave as if any + ** values read from the parent table are NULL. */ + if( db->xAuth ){ + int rcauth; + char *zCol = pTo->aCol[pIdx ? pIdx->aiColumn[i] : pTo->iPKey].zName; + rcauth = sqlite3AuthReadCol(pParse, pTo->zName, zCol, iDb); + isIgnore = (rcauth==SQLITE_IGNORE); + } +#endif + } + + /* Take a shared-cache advisory read-lock on the parent table. Allocate + ** a cursor to use to search the unique index on the parent key columns + ** in the parent table. */ + sqlite3TableLock(pParse, iDb, pTo->tnum, 0, pTo->zName); + pParse->nTab++; + + if( regOld!=0 ){ + /* A row is being removed from the child table. Search for the parent. + ** If the parent does not exist, removing the child row resolves an + ** outstanding foreign key constraint violation. */ + fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regOld, -1,isIgnore); + } + if( regNew!=0 ){ + /* A row is being added to the child table. If a parent row cannot + ** be found, adding the child row has violated the FK constraint. */ + fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regNew, +1,isIgnore); + } + + sqlite3DbFree(db, aiFree); } - p = contextMalloc(context, n); - if( p ){ - sqlite3_randomness(n, p); - sqlite3_result_blob(context, (char*)p, n, sqlite3_free); + + /* Loop through all the foreign key constraints that refer to this table. + ** (the "child" constraints) */ + for(pFKey = sqlite3FkReferences(pTab); pFKey; pFKey=pFKey->pNextTo){ + Index *pIdx = 0; /* Foreign key index for pFKey */ + SrcList *pSrc; + int *aiCol = 0; + + if( aChange && fkParentIsModified(pTab, pFKey, aChange, bChngRowid)==0 ){ + continue; + } + + if( !pFKey->isDeferred && !(db->flags & SQLITE_DeferFKs) + && !pParse->pToplevel && !pParse->isMultiWrite + ){ + assert( regOld==0 && regNew!=0 ); + /* Inserting a single row into a parent table cannot cause an immediate + ** foreign key violation. So do nothing in this case. */ + continue; + } + + if( sqlite3FkLocateIndex(pParse, pTab, pFKey, &pIdx, &aiCol) ){ + if( !isIgnoreErrors || db->mallocFailed ) return; + continue; + } + assert( aiCol || pFKey->nCol==1 ); + + /* Create a SrcList structure containing the child table. We need the + ** child table as a SrcList for sqlite3WhereBegin() */ + pSrc = sqlite3SrcListAppend(db, 0, 0, 0); + if( pSrc ){ + struct SrcList_item *pItem = pSrc->a; + pItem->pTab = pFKey->pFrom; + pItem->zName = pFKey->pFrom->zName; + pItem->pTab->nRef++; + pItem->iCursor = pParse->nTab++; + + if( regNew!=0 ){ + fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regNew, -1); + } + if( regOld!=0 ){ + /* If there is a RESTRICT action configured for the current operation + ** on the parent table of this FK, then throw an exception + ** immediately if the FK constraint is violated, even if this is a + ** deferred trigger. That's what RESTRICT means. To defer checking + ** the constraint, the FK should specify NO ACTION (represented + ** using OE_None). NO ACTION is the default. */ + fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regOld, 1); + } + pItem->zName = 0; + sqlite3SrcListDelete(db, pSrc); + } + sqlite3DbFree(db, aiCol); } } +#define COLUMN_MASK(x) (((x)>31) ? 0xffffffff : ((u32)1<<(x))) + /* -** Implementation of the last_insert_rowid() SQL function. The return -** value is the same as the sqlite3_last_insert_rowid() API function. +** This function is called before generating code to update or delete a +** row contained in table pTab. */ -static void last_insert_rowid( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 +SQLITE_PRIVATE u32 sqlite3FkOldmask( + Parse *pParse, /* Parse context */ + Table *pTab /* Table being modified */ ){ - sqlite3 *db = sqlite3_context_db_handle(context); - UNUSED_PARAMETER2(NotUsed, NotUsed2); - /* IMP: R-51513-12026 The last_insert_rowid() SQL function is a - ** wrapper around the sqlite3_last_insert_rowid() C/C++ interface - ** function. */ - sqlite3_result_int64(context, sqlite3_last_insert_rowid(db)); + u32 mask = 0; + if( pParse->db->flags&SQLITE_ForeignKeys ){ + FKey *p; + int i; + for(p=pTab->pFKey; p; p=p->pNextFrom){ + for(i=0; inCol; i++) mask |= COLUMN_MASK(p->aCol[i].iFrom); + } + for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ + Index *pIdx = 0; + sqlite3FkLocateIndex(pParse, pTab, p, &pIdx, 0); + if( pIdx ){ + for(i=0; inKeyCol; i++) mask |= COLUMN_MASK(pIdx->aiColumn[i]); + } + } + } + return mask; } + /* -** Implementation of the changes() SQL function. +** This function is called before generating code to update or delete a +** row contained in table pTab. If the operation is a DELETE, then +** parameter aChange is passed a NULL value. For an UPDATE, aChange points +** to an array of size N, where N is the number of columns in table pTab. +** If the i'th column is not modified by the UPDATE, then the corresponding +** entry in the aChange[] array is set to -1. If the column is modified, +** the value is 0 or greater. Parameter chngRowid is set to true if the +** UPDATE statement modifies the rowid fields of the table. ** -** IMP: R-62073-11209 The changes() SQL function is a wrapper -** around the sqlite3_changes() C/C++ function and hence follows the same -** rules for counting changes. +** If any foreign key processing will be required, this function returns +** true. If there is no foreign key related processing, this function +** returns false. */ -static void changes( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 +SQLITE_PRIVATE int sqlite3FkRequired( + Parse *pParse, /* Parse context */ + Table *pTab, /* Table being modified */ + int *aChange, /* Non-NULL for UPDATE operations */ + int chngRowid /* True for UPDATE that affects rowid */ ){ - sqlite3 *db = sqlite3_context_db_handle(context); - UNUSED_PARAMETER2(NotUsed, NotUsed2); - sqlite3_result_int(context, sqlite3_changes(db)); + if( pParse->db->flags&SQLITE_ForeignKeys ){ + if( !aChange ){ + /* A DELETE operation. Foreign key processing is required if the + ** table in question is either the child or parent table for any + ** foreign key constraint. */ + return (sqlite3FkReferences(pTab) || pTab->pFKey); + }else{ + /* This is an UPDATE. Foreign key processing is only required if the + ** operation modifies one or more child or parent key columns. */ + FKey *p; + + /* Check if any child key columns are being modified. */ + for(p=pTab->pFKey; p; p=p->pNextFrom){ + if( fkChildIsModified(pTab, p, aChange, chngRowid) ) return 1; + } + + /* Check if any parent key columns are being modified. */ + for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ + if( fkParentIsModified(pTab, p, aChange, chngRowid) ) return 1; + } + } + } + return 0; } /* -** Implementation of the total_changes() SQL function. The return value is -** the same as the sqlite3_total_changes() API function. +** This function is called when an UPDATE or DELETE operation is being +** compiled on table pTab, which is the parent table of foreign-key pFKey. +** If the current operation is an UPDATE, then the pChanges parameter is +** passed a pointer to the list of columns being modified. If it is a +** DELETE, pChanges is passed a NULL pointer. +** +** It returns a pointer to a Trigger structure containing a trigger +** equivalent to the ON UPDATE or ON DELETE action specified by pFKey. +** If the action is "NO ACTION" or "RESTRICT", then a NULL pointer is +** returned (these actions require no special handling by the triggers +** sub-system, code for them is created by fkScanChildren()). +** +** For example, if pFKey is the foreign key and pTab is table "p" in +** the following schema: +** +** CREATE TABLE p(pk PRIMARY KEY); +** CREATE TABLE c(ck REFERENCES p ON DELETE CASCADE); +** +** then the returned trigger structure is equivalent to: +** +** CREATE TRIGGER ... DELETE ON p BEGIN +** DELETE FROM c WHERE ck = old.pk; +** END; +** +** The returned pointer is cached as part of the foreign key object. It +** is eventually freed along with the rest of the foreign key object by +** sqlite3FkDelete(). */ -static void total_changes( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 +static Trigger *fkActionTrigger( + Parse *pParse, /* Parse context */ + Table *pTab, /* Table being updated or deleted from */ + FKey *pFKey, /* Foreign key to get action for */ + ExprList *pChanges /* Change-list for UPDATE, NULL for DELETE */ ){ - sqlite3 *db = sqlite3_context_db_handle(context); - UNUSED_PARAMETER2(NotUsed, NotUsed2); - /* IMP: R-52756-41993 This function is a wrapper around the - ** sqlite3_total_changes() C/C++ interface. */ - sqlite3_result_int(context, sqlite3_total_changes(db)); -} + sqlite3 *db = pParse->db; /* Database handle */ + int action; /* One of OE_None, OE_Cascade etc. */ + Trigger *pTrigger; /* Trigger definition to return */ + int iAction = (pChanges!=0); /* 1 for UPDATE, 0 for DELETE */ -/* -** A structure defining how to do GLOB-style comparisons. -*/ -struct compareInfo { - u8 matchAll; - u8 matchOne; - u8 matchSet; - u8 noCase; -}; + action = pFKey->aAction[iAction]; + pTrigger = pFKey->apTrigger[iAction]; + + if( action!=OE_None && !pTrigger ){ + u8 enableLookaside; /* Copy of db->lookaside.bEnabled */ + char const *zFrom; /* Name of child table */ + int nFrom; /* Length in bytes of zFrom */ + Index *pIdx = 0; /* Parent key index for this FK */ + int *aiCol = 0; /* child table cols -> parent key cols */ + TriggerStep *pStep = 0; /* First (only) step of trigger program */ + Expr *pWhere = 0; /* WHERE clause of trigger step */ + ExprList *pList = 0; /* Changes list if ON UPDATE CASCADE */ + Select *pSelect = 0; /* If RESTRICT, "SELECT RAISE(...)" */ + int i; /* Iterator variable */ + Expr *pWhen = 0; /* WHEN clause for the trigger */ + + if( sqlite3FkLocateIndex(pParse, pTab, pFKey, &pIdx, &aiCol) ) return 0; + assert( aiCol || pFKey->nCol==1 ); + + for(i=0; inCol; i++){ + Token tOld = { "old", 3 }; /* Literal "old" token */ + Token tNew = { "new", 3 }; /* Literal "new" token */ + Token tFromCol; /* Name of column in child table */ + Token tToCol; /* Name of column in parent table */ + int iFromCol; /* Idx of column in child table */ + Expr *pEq; /* tFromCol = OLD.tToCol */ + + iFromCol = aiCol ? aiCol[i] : pFKey->aCol[0].iFrom; + assert( iFromCol>=0 ); + tToCol.z = pIdx ? pTab->aCol[pIdx->aiColumn[i]].zName : "oid"; + tFromCol.z = pFKey->pFrom->aCol[iFromCol].zName; -/* -** For LIKE and GLOB matching on EBCDIC machines, assume that every -** character is exactly one byte in size. Also, all characters are -** able to participate in upper-case-to-lower-case mappings in EBCDIC -** whereas only characters less than 0x80 do in ASCII. -*/ -#if defined(SQLITE_EBCDIC) -# define sqlite3Utf8Read(A,C) (*(A++)) -# define GlogUpperToLower(A) A = sqlite3UpperToLower[A] -#else -# define GlogUpperToLower(A) if( !((A)&~0x7f) ){ A = sqlite3UpperToLower[A]; } -#endif + tToCol.n = sqlite3Strlen30(tToCol.z); + tFromCol.n = sqlite3Strlen30(tFromCol.z); -static const struct compareInfo globInfo = { '*', '?', '[', 0 }; -/* The correct SQL-92 behavior is for the LIKE operator to ignore -** case. Thus 'a' LIKE 'A' would be true. */ -static const struct compareInfo likeInfoNorm = { '%', '_', 0, 1 }; -/* If SQLITE_CASE_SENSITIVE_LIKE is defined, then the LIKE operator -** is case sensitive causing 'a' LIKE 'A' to be false */ -static const struct compareInfo likeInfoAlt = { '%', '_', 0, 0 }; + /* Create the expression "OLD.zToCol = zFromCol". It is important + ** that the "OLD.zToCol" term is on the LHS of the = operator, so + ** that the affinity and collation sequence associated with the + ** parent table are used for the comparison. */ + pEq = sqlite3PExpr(pParse, TK_EQ, + sqlite3PExpr(pParse, TK_DOT, + sqlite3PExpr(pParse, TK_ID, 0, 0, &tOld), + sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol) + , 0), + sqlite3PExpr(pParse, TK_ID, 0, 0, &tFromCol) + , 0); + pWhere = sqlite3ExprAnd(db, pWhere, pEq); -/* -** Compare two UTF-8 strings for equality where the first string can -** potentially be a "glob" expression. Return true (1) if they -** are the same and false (0) if they are different. -** -** Globbing rules: -** -** '*' Matches any sequence of zero or more characters. -** -** '?' Matches exactly one character. -** -** [...] Matches one character from the enclosed list of -** characters. -** -** [^...] Matches one character not in the enclosed list. -** -** With the [...] and [^...] matching, a ']' character can be included -** in the list by making it the first character after '[' or '^'. A -** range of characters can be specified using '-'. Example: -** "[a-z]" matches any single lower-case letter. To match a '-', make -** it the last character in the list. -** -** This routine is usually quick, but can be N**2 in the worst case. -** -** Hints: to match '*' or '?', put them in "[]". Like this: -** -** abc[*]xyz Matches "abc*xyz" only -*/ -static int patternCompare( - const u8 *zPattern, /* The glob pattern */ - const u8 *zString, /* The string to compare against the glob */ - const struct compareInfo *pInfo, /* Information about how to do the compare */ - u32 esc /* The escape character */ -){ - u32 c, c2; - int invert; - int seen; - u8 matchOne = pInfo->matchOne; - u8 matchAll = pInfo->matchAll; - u8 matchSet = pInfo->matchSet; - u8 noCase = pInfo->noCase; - int prevEscape = 0; /* True if the previous character was 'escape' */ - - while( (c = sqlite3Utf8Read(zPattern,&zPattern))!=0 ){ - if( !prevEscape && c==matchAll ){ - while( (c=sqlite3Utf8Read(zPattern,&zPattern)) == matchAll - || c == matchOne ){ - if( c==matchOne && sqlite3Utf8Read(zString, &zString)==0 ){ - return 0; - } - } - if( c==0 ){ - return 1; - }else if( c==esc ){ - c = sqlite3Utf8Read(zPattern, &zPattern); - if( c==0 ){ - return 0; - } - }else if( c==matchSet ){ - assert( esc==0 ); /* This is GLOB, not LIKE */ - assert( matchSet<0x80 ); /* '[' is a single-byte character */ - while( *zString && patternCompare(&zPattern[-1],zString,pInfo,esc)==0 ){ - SQLITE_SKIP_UTF8(zString); - } - return *zString!=0; + /* For ON UPDATE, construct the next term of the WHEN clause. + ** The final WHEN clause will be like this: + ** + ** WHEN NOT(old.col1 IS new.col1 AND ... AND old.colN IS new.colN) + */ + if( pChanges ){ + pEq = sqlite3PExpr(pParse, TK_IS, + sqlite3PExpr(pParse, TK_DOT, + sqlite3PExpr(pParse, TK_ID, 0, 0, &tOld), + sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol), + 0), + sqlite3PExpr(pParse, TK_DOT, + sqlite3PExpr(pParse, TK_ID, 0, 0, &tNew), + sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol), + 0), + 0); + pWhen = sqlite3ExprAnd(db, pWhen, pEq); } - while( (c2 = sqlite3Utf8Read(zString,&zString))!=0 ){ - if( noCase ){ - GlogUpperToLower(c2); - GlogUpperToLower(c); - while( c2 != 0 && c2 != c ){ - c2 = sqlite3Utf8Read(zString, &zString); - GlogUpperToLower(c2); - } - }else{ - while( c2 != 0 && c2 != c ){ - c2 = sqlite3Utf8Read(zString, &zString); + + if( action!=OE_Restrict && (action!=OE_Cascade || pChanges) ){ + Expr *pNew; + if( action==OE_Cascade ){ + pNew = sqlite3PExpr(pParse, TK_DOT, + sqlite3PExpr(pParse, TK_ID, 0, 0, &tNew), + sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol) + , 0); + }else if( action==OE_SetDflt ){ + Expr *pDflt = pFKey->pFrom->aCol[iFromCol].pDflt; + if( pDflt ){ + pNew = sqlite3ExprDup(db, pDflt, 0); + }else{ + pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0); } - } - if( c2==0 ) return 0; - if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; - } - return 0; - }else if( !prevEscape && c==matchOne ){ - if( sqlite3Utf8Read(zString, &zString)==0 ){ - return 0; - } - }else if( c==matchSet ){ - u32 prior_c = 0; - assert( esc==0 ); /* This only occurs for GLOB, not LIKE */ - seen = 0; - invert = 0; - c = sqlite3Utf8Read(zString, &zString); - if( c==0 ) return 0; - c2 = sqlite3Utf8Read(zPattern, &zPattern); - if( c2=='^' ){ - invert = 1; - c2 = sqlite3Utf8Read(zPattern, &zPattern); - } - if( c2==']' ){ - if( c==']' ) seen = 1; - c2 = sqlite3Utf8Read(zPattern, &zPattern); - } - while( c2 && c2!=']' ){ - if( c2=='-' && zPattern[0]!=']' && zPattern[0]!=0 && prior_c>0 ){ - c2 = sqlite3Utf8Read(zPattern, &zPattern); - if( c>=prior_c && c<=c2 ) seen = 1; - prior_c = 0; }else{ - if( c==c2 ){ - seen = 1; - } - prior_c = c2; + pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0); } - c2 = sqlite3Utf8Read(zPattern, &zPattern); - } - if( c2==0 || (seen ^ invert)==0 ){ - return 0; - } - }else if( esc==c && !prevEscape ){ - prevEscape = 1; - }else{ - c2 = sqlite3Utf8Read(zString, &zString); - if( noCase ){ - GlogUpperToLower(c); - GlogUpperToLower(c2); - } - if( c!=c2 ){ - return 0; + pList = sqlite3ExprListAppend(pParse, pList, pNew); + sqlite3ExprListSetName(pParse, pList, &tFromCol, 0); } - prevEscape = 0; } - } - return *zString==0; -} + sqlite3DbFree(db, aiCol); -/* -** Count the number of times that the LIKE operator (or GLOB which is -** just a variation of LIKE) gets called. This is used for testing -** only. -*/ -#ifdef SQLITE_TEST -SQLITE_API int sqlite3_like_count = 0; -#endif + zFrom = pFKey->pFrom->zName; + nFrom = sqlite3Strlen30(zFrom); + if( action==OE_Restrict ){ + Token tFrom; + Expr *pRaise; -/* -** Implementation of the like() SQL function. This function implements -** the build-in LIKE operator. The first argument to the function is the -** pattern and the second argument is the string. So, the SQL statements: -** -** A LIKE B -** -** is implemented as like(B,A). -** -** This same function (with a different compareInfo structure) computes -** the GLOB operator. -*/ -static void likeFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - const unsigned char *zA, *zB; - u32 escape = 0; - int nPat; - sqlite3 *db = sqlite3_context_db_handle(context); + tFrom.z = zFrom; + tFrom.n = nFrom; + pRaise = sqlite3Expr(db, TK_RAISE, "FOREIGN KEY constraint failed"); + if( pRaise ){ + pRaise->affinity = OE_Abort; + } + pSelect = sqlite3SelectNew(pParse, + sqlite3ExprListAppend(pParse, 0, pRaise), + sqlite3SrcListAppend(db, 0, &tFrom, 0), + pWhere, + 0, 0, 0, 0, 0, 0 + ); + pWhere = 0; + } - zB = sqlite3_value_text(argv[0]); - zA = sqlite3_value_text(argv[1]); + /* Disable lookaside memory allocation */ + enableLookaside = db->lookaside.bEnabled; + db->lookaside.bEnabled = 0; - /* Limit the length of the LIKE or GLOB pattern to avoid problems - ** of deep recursion and N*N behavior in patternCompare(). - */ - nPat = sqlite3_value_bytes(argv[0]); - testcase( nPat==db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH] ); - testcase( nPat==db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]+1 ); - if( nPat > db->aLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH] ){ - sqlite3_result_error(context, "LIKE or GLOB pattern too complex", -1); - return; - } - assert( zB==sqlite3_value_text(argv[0]) ); /* Encoding did not change */ + pTrigger = (Trigger *)sqlite3DbMallocZero(db, + sizeof(Trigger) + /* struct Trigger */ + sizeof(TriggerStep) + /* Single step in trigger program */ + nFrom + 1 /* Space for pStep->target.z */ + ); + if( pTrigger ){ + pStep = pTrigger->step_list = (TriggerStep *)&pTrigger[1]; + pStep->target.z = (char *)&pStep[1]; + pStep->target.n = nFrom; + memcpy((char *)pStep->target.z, zFrom, nFrom); + + pStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + pStep->pExprList = sqlite3ExprListDup(db, pList, EXPRDUP_REDUCE); + pStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + if( pWhen ){ + pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0, 0); + pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); + } + } - if( argc==3 ){ - /* The escape character string must consist of a single UTF-8 character. - ** Otherwise, return an error. - */ - const unsigned char *zEsc = sqlite3_value_text(argv[2]); - if( zEsc==0 ) return; - if( sqlite3Utf8CharLen((char*)zEsc, -1)!=1 ){ - sqlite3_result_error(context, - "ESCAPE expression must be a single character", -1); - return; + /* Re-enable the lookaside buffer, if it was disabled earlier. */ + db->lookaside.bEnabled = enableLookaside; + + sqlite3ExprDelete(db, pWhere); + sqlite3ExprDelete(db, pWhen); + sqlite3ExprListDelete(db, pList); + sqlite3SelectDelete(db, pSelect); + if( db->mallocFailed==1 ){ + fkTriggerDelete(db, pTrigger); + return 0; } - escape = sqlite3Utf8Read(zEsc, &zEsc); - } - if( zA && zB ){ - struct compareInfo *pInfo = sqlite3_user_data(context); -#ifdef SQLITE_TEST - sqlite3_like_count++; -#endif - - sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)); + assert( pStep!=0 ); + + switch( action ){ + case OE_Restrict: + pStep->op = TK_SELECT; + break; + case OE_Cascade: + if( !pChanges ){ + pStep->op = TK_DELETE; + break; + } + default: + pStep->op = TK_UPDATE; + } + pStep->pTrig = pTrigger; + pTrigger->pSchema = pTab->pSchema; + pTrigger->pTabSchema = pTab->pSchema; + pFKey->apTrigger[iAction] = pTrigger; + pTrigger->op = (pChanges ? TK_UPDATE : TK_DELETE); } + + return pTrigger; } /* -** Implementation of the NULLIF(x,y) function. The result is the first -** argument if the arguments are different. The result is NULL if the -** arguments are equal to each other. +** This function is called when deleting or updating a row to implement +** any required CASCADE, SET NULL or SET DEFAULT actions. */ -static void nullifFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv +SQLITE_PRIVATE void sqlite3FkActions( + Parse *pParse, /* Parse context */ + Table *pTab, /* Table being updated or deleted from */ + ExprList *pChanges, /* Change-list for UPDATE, NULL for DELETE */ + int regOld, /* Address of array containing old row */ + int *aChange, /* Array indicating UPDATEd columns (or 0) */ + int bChngRowid /* True if rowid is UPDATEd */ ){ - CollSeq *pColl = sqlite3GetFuncCollSeq(context); - UNUSED_PARAMETER(NotUsed); - if( sqlite3MemCompare(argv[0], argv[1], pColl)!=0 ){ - sqlite3_result_value(context, argv[0]); + /* If foreign-key support is enabled, iterate through all FKs that + ** refer to table pTab. If there is an action associated with the FK + ** for this operation (either update or delete), invoke the associated + ** trigger sub-program. */ + if( pParse->db->flags&SQLITE_ForeignKeys ){ + FKey *pFKey; /* Iterator variable */ + for(pFKey = sqlite3FkReferences(pTab); pFKey; pFKey=pFKey->pNextTo){ + if( aChange==0 || fkParentIsModified(pTab, pFKey, aChange, bChngRowid) ){ + Trigger *pAct = fkActionTrigger(pParse, pTab, pFKey, pChanges); + if( pAct ){ + sqlite3CodeRowTriggerDirect(pParse, pAct, pTab, regOld, OE_Abort, 0); + } + } + } } } -/* -** Implementation of the sqlite_version() function. The result is the version -** of the SQLite library that is running. -*/ -static void versionFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 -){ - UNUSED_PARAMETER2(NotUsed, NotUsed2); - /* IMP: R-48699-48617 This function is an SQL wrapper around the - ** sqlite3_libversion() C-interface. */ - sqlite3_result_text(context, sqlite3_libversion(), -1, SQLITE_STATIC); -} +#endif /* ifndef SQLITE_OMIT_TRIGGER */ /* -** Implementation of the sqlite_source_id() function. The result is a string -** that identifies the particular version of the source code used to build -** SQLite. +** Free all memory associated with foreign key definitions attached to +** table pTab. Remove the deleted foreign keys from the Schema.fkeyHash +** hash table. */ -static void sourceidFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **NotUsed2 -){ - UNUSED_PARAMETER2(NotUsed, NotUsed2); - /* IMP: R-24470-31136 This function is an SQL wrapper around the - ** sqlite3_sourceid() C interface. */ - sqlite3_result_text(context, sqlite3_sourceid(), -1, SQLITE_STATIC); +SQLITE_PRIVATE void sqlite3FkDelete(sqlite3 *db, Table *pTab){ + FKey *pFKey; /* Iterator variable */ + FKey *pNext; /* Copy of pFKey->pNextFrom */ + + assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pTab->pSchema) ); + for(pFKey=pTab->pFKey; pFKey; pFKey=pNext){ + + /* Remove the FK from the fkeyHash hash table. */ + if( !db || db->pnBytesFreed==0 ){ + if( pFKey->pPrevTo ){ + pFKey->pPrevTo->pNextTo = pFKey->pNextTo; + }else{ + void *p = (void *)pFKey->pNextTo; + const char *z = (p ? pFKey->pNextTo->zTo : pFKey->zTo); + sqlite3HashInsert(&pTab->pSchema->fkeyHash, z, p); + } + if( pFKey->pNextTo ){ + pFKey->pNextTo->pPrevTo = pFKey->pPrevTo; + } + } + + /* EV: R-30323-21917 Each foreign key constraint in SQLite is + ** classified as either immediate or deferred. + */ + assert( pFKey->isDeferred==0 || pFKey->isDeferred==1 ); + + /* Delete any triggers created to implement actions for this FK. */ +#ifndef SQLITE_OMIT_TRIGGER + fkTriggerDelete(db, pFKey->apTrigger[0]); + fkTriggerDelete(db, pFKey->apTrigger[1]); +#endif + + pNext = pFKey->pNextFrom; + sqlite3DbFree(db, pFKey); + } } +#endif /* ifndef SQLITE_OMIT_FOREIGN_KEY */ +/************** End of fkey.c ************************************************/ +/************** Begin file insert.c ******************************************/ /* -** Implementation of the sqlite_log() function. This is a wrapper around -** sqlite3_log(). The return value is NULL. The function exists purely for -** its side-effects. +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains C code routines that are called by the parser +** to handle INSERT statements in SQLite. */ -static void errlogFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - UNUSED_PARAMETER(argc); - UNUSED_PARAMETER(context); - sqlite3_log(sqlite3_value_int(argv[0]), "%s", sqlite3_value_text(argv[1])); -} /* -** Implementation of the sqlite_compileoption_used() function. -** The result is an integer that identifies if the compiler option -** was used to build SQLite. +** Generate code that will +** +** (1) acquire a lock for table pTab then +** (2) open pTab as cursor iCur. +** +** If pTab is a WITHOUT ROWID table, then it is the PRIMARY KEY index +** for that table that is actually opened. */ -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS -static void compileoptionusedFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +SQLITE_PRIVATE void sqlite3OpenTable( + Parse *pParse, /* Generate code into this VDBE */ + int iCur, /* The cursor number of the table */ + int iDb, /* The database index in sqlite3.aDb[] */ + Table *pTab, /* The table to be opened */ + int opcode /* OP_OpenRead or OP_OpenWrite */ ){ - const char *zOptName; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - /* IMP: R-39564-36305 The sqlite_compileoption_used() SQL - ** function is a wrapper around the sqlite3_compileoption_used() C/C++ - ** function. - */ - if( (zOptName = (const char*)sqlite3_value_text(argv[0]))!=0 ){ - sqlite3_result_int(context, sqlite3_compileoption_used(zOptName)); + Vdbe *v; + assert( !IsVirtual(pTab) ); + v = sqlite3GetVdbe(pParse); + assert( opcode==OP_OpenWrite || opcode==OP_OpenRead ); + sqlite3TableLock(pParse, iDb, pTab->tnum, + (opcode==OP_OpenWrite)?1:0, pTab->zName); + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp4Int(v, opcode, iCur, pTab->tnum, iDb, pTab->nCol); + VdbeComment((v, "%s", pTab->zName)); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + assert( pPk!=0 ); + assert( pPk->tnum=pTab->tnum ); + sqlite3VdbeAddOp3(v, opcode, iCur, pPk->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); + VdbeComment((v, "%s", pTab->zName)); } } -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ /* -** Implementation of the sqlite_compileoption_get() function. -** The result is a string that identifies the compiler options -** used to build SQLite. +** Return a pointer to the column affinity string associated with index +** pIdx. A column affinity string has one character for each column in +** the table, according to the affinity of the column: +** +** Character Column affinity +** ------------------------------ +** 'A' NONE +** 'B' TEXT +** 'C' NUMERIC +** 'D' INTEGER +** 'F' REAL +** +** An extra 'D' is appended to the end of the string to cover the +** rowid that appears as the last column in every index. +** +** Memory for the buffer containing the column index affinity string +** is managed along with the rest of the Index structure. It will be +** released when sqlite3DeleteIndex() is called. */ -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS -static void compileoptiongetFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - int n; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - /* IMP: R-04922-24076 The sqlite_compileoption_get() SQL function - ** is a wrapper around the sqlite3_compileoption_get() C/C++ function. - */ - n = sqlite3_value_int(argv[0]); - sqlite3_result_text(context, sqlite3_compileoption_get(n), -1, SQLITE_STATIC); +SQLITE_PRIVATE const char *sqlite3IndexAffinityStr(Vdbe *v, Index *pIdx){ + if( !pIdx->zColAff ){ + /* The first time a column affinity string for a particular index is + ** required, it is allocated and populated here. It is then stored as + ** a member of the Index structure for subsequent use. + ** + ** The column affinity string will eventually be deleted by + ** sqliteDeleteIndex() when the Index structure itself is cleaned + ** up. + */ + int n; + Table *pTab = pIdx->pTable; + sqlite3 *db = sqlite3VdbeDb(v); + pIdx->zColAff = (char *)sqlite3DbMallocRaw(0, pIdx->nColumn+1); + if( !pIdx->zColAff ){ + db->mallocFailed = 1; + return 0; + } + for(n=0; nnColumn; n++){ + i16 x = pIdx->aiColumn[n]; + pIdx->zColAff[n] = x<0 ? SQLITE_AFF_INTEGER : pTab->aCol[x].affinity; + } + pIdx->zColAff[n] = 0; + } + + return pIdx->zColAff; } -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - -/* Array for converting from half-bytes (nybbles) into ASCII hex -** digits. */ -static const char hexdigits[] = { - '0', '1', '2', '3', '4', '5', '6', '7', - '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' -}; /* -** EXPERIMENTAL - This is not an official function. The interface may -** change. This function may disappear. Do not write code that depends -** on this function. +** Compute the affinity string for table pTab, if it has not already been +** computed. As an optimization, omit trailing SQLITE_AFF_NONE affinities. ** -** Implementation of the QUOTE() function. This function takes a single -** argument. If the argument is numeric, the return value is the same as -** the argument. If the argument is NULL, the return value is the string -** "NULL". Otherwise, the argument is enclosed in single quotes with -** single-quote escapes. +** If the affinity exists (if it is no entirely SQLITE_AFF_NONE values) and +** if iReg>0 then code an OP_Affinity opcode that will set the affinities +** for register iReg and following. Or if affinities exists and iReg==0, +** then just set the P4 operand of the previous opcode (which should be +** an OP_MakeRecord) to the affinity string. +** +** A column affinity string has one character per column: +** +** Character Column affinity +** ------------------------------ +** 'A' NONE +** 'B' TEXT +** 'C' NUMERIC +** 'D' INTEGER +** 'E' REAL */ -static void quoteFunc(sqlite3_context *context, int argc, sqlite3_value **argv){ - assert( argc==1 ); - UNUSED_PARAMETER(argc); - switch( sqlite3_value_type(argv[0]) ){ - case SQLITE_INTEGER: - case SQLITE_FLOAT: { - sqlite3_result_value(context, argv[0]); - break; +SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe *v, Table *pTab, int iReg){ + int i; + char *zColAff = pTab->zColAff; + if( zColAff==0 ){ + sqlite3 *db = sqlite3VdbeDb(v); + zColAff = (char *)sqlite3DbMallocRaw(0, pTab->nCol+1); + if( !zColAff ){ + db->mallocFailed = 1; + return; } - case SQLITE_BLOB: { - char *zText = 0; - char const *zBlob = sqlite3_value_blob(argv[0]); - int nBlob = sqlite3_value_bytes(argv[0]); - assert( zBlob==sqlite3_value_blob(argv[0]) ); /* No encoding change */ - zText = (char *)contextMalloc(context, (2*(i64)nBlob)+4); - if( zText ){ - int i; - for(i=0; i>4)&0x0F]; - zText[(i*2)+3] = hexdigits[(zBlob[i])&0x0F]; - } - zText[(nBlob*2)+2] = '\''; - zText[(nBlob*2)+3] = '\0'; - zText[0] = 'X'; - zText[1] = '\''; - sqlite3_result_text(context, zText, -1, SQLITE_TRANSIENT); - sqlite3_free(zText); - } - break; + + for(i=0; inCol; i++){ + zColAff[i] = pTab->aCol[i].affinity; } - case SQLITE_TEXT: { - int i,j; - u64 n; - const unsigned char *zArg = sqlite3_value_text(argv[0]); - char *z; + do{ + zColAff[i--] = 0; + }while( i>=0 && zColAff[i]==SQLITE_AFF_NONE ); + pTab->zColAff = zColAff; + } + i = sqlite3Strlen30(zColAff); + if( i ){ + if( iReg ){ + sqlite3VdbeAddOp4(v, OP_Affinity, iReg, i, 0, zColAff, i); + }else{ + sqlite3VdbeChangeP4(v, -1, zColAff, i); + } + } +} - if( zArg==0 ) return; - for(i=0, n=0; zArg[i]; i++){ if( zArg[i]=='\'' ) n++; } - z = contextMalloc(context, ((i64)i)+((i64)n)+3); - if( z ){ - z[0] = '\''; - for(i=0, j=1; zArg[i]; i++){ - z[j++] = zArg[i]; - if( zArg[i]=='\'' ){ - z[j++] = '\''; - } +/* +** Return non-zero if the table pTab in database iDb or any of its indices +** have been opened at any point in the VDBE program. This is used to see if +** a statement of the form "INSERT INTO SELECT ..." can +** run without using a temporary table for the results of the SELECT. +*/ +static int readsTable(Parse *p, int iDb, Table *pTab){ + Vdbe *v = sqlite3GetVdbe(p); + int i; + int iEnd = sqlite3VdbeCurrentAddr(v); +#ifndef SQLITE_OMIT_VIRTUALTABLE + VTable *pVTab = IsVirtual(pTab) ? sqlite3GetVTable(p->db, pTab) : 0; +#endif + + for(i=1; iopcode==OP_OpenRead && pOp->p3==iDb ){ + Index *pIndex; + int tnum = pOp->p2; + if( tnum==pTab->tnum ){ + return 1; + } + for(pIndex=pTab->pIndex; pIndex; pIndex=pIndex->pNext){ + if( tnum==pIndex->tnum ){ + return 1; } - z[j++] = '\''; - z[j] = 0; - sqlite3_result_text(context, z, j, sqlite3_free); } - break; } - default: { - assert( sqlite3_value_type(argv[0])==SQLITE_NULL ); - sqlite3_result_text(context, "NULL", 4, SQLITE_STATIC); - break; +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pOp->opcode==OP_VOpen && pOp->p4.pVtab==pVTab ){ + assert( pOp->p4.pVtab!=0 ); + assert( pOp->p4type==P4_VTAB ); + return 1; } +#endif } + return 0; } +#ifndef SQLITE_OMIT_AUTOINCREMENT /* -** The hex() function. Interpret the argument as a blob. Return -** a hexadecimal rendering as text. +** Locate or create an AutoincInfo structure associated with table pTab +** which is in database iDb. Return the register number for the register +** that holds the maximum rowid. +** +** There is at most one AutoincInfo structure per table even if the +** same table is autoincremented multiple times due to inserts within +** triggers. A new AutoincInfo structure is created if this is the +** first use of table pTab. On 2nd and subsequent uses, the original +** AutoincInfo structure is used. +** +** Three memory locations are allocated: +** +** (1) Register to hold the name of the pTab table. +** (2) Register to hold the maximum ROWID of pTab. +** (3) Register to hold the rowid in sqlite_sequence of pTab +** +** The 2nd register is the one that is returned. That is all the +** insert routine needs to know about. */ -static void hexFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static int autoIncBegin( + Parse *pParse, /* Parsing context */ + int iDb, /* Index of the database holding pTab */ + Table *pTab /* The table we are writing to */ ){ - int i, n; - const unsigned char *pBlob; - char *zHex, *z; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - pBlob = sqlite3_value_blob(argv[0]); - n = sqlite3_value_bytes(argv[0]); - assert( pBlob==sqlite3_value_blob(argv[0]) ); /* No encoding change */ - z = zHex = contextMalloc(context, ((i64)n)*2 + 1); - if( zHex ){ - for(i=0; i>4)&0xf]; - *(z++) = hexdigits[c&0xf]; + int memId = 0; /* Register holding maximum rowid */ + if( pTab->tabFlags & TF_Autoincrement ){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + AutoincInfo *pInfo; + + pInfo = pToplevel->pAinc; + while( pInfo && pInfo->pTab!=pTab ){ pInfo = pInfo->pNext; } + if( pInfo==0 ){ + pInfo = sqlite3DbMallocRaw(pParse->db, sizeof(*pInfo)); + if( pInfo==0 ) return 0; + pInfo->pNext = pToplevel->pAinc; + pToplevel->pAinc = pInfo; + pInfo->pTab = pTab; + pInfo->iDb = iDb; + pToplevel->nMem++; /* Register to hold name of table */ + pInfo->regCtr = ++pToplevel->nMem; /* Max rowid register */ + pToplevel->nMem++; /* Rowid in sqlite_sequence */ } - *z = 0; - sqlite3_result_text(context, zHex, n*2, sqlite3_free); + memId = pInfo->regCtr; } + return memId; } /* -** The zeroblob(N) function returns a zero-filled blob of size N bytes. +** This routine generates code that will initialize all of the +** register used by the autoincrement tracker. */ -static void zeroblobFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - i64 n; - sqlite3 *db = sqlite3_context_db_handle(context); - assert( argc==1 ); - UNUSED_PARAMETER(argc); - n = sqlite3_value_int64(argv[0]); - testcase( n==db->aLimit[SQLITE_LIMIT_LENGTH] ); - testcase( n==db->aLimit[SQLITE_LIMIT_LENGTH]+1 ); - if( n>db->aLimit[SQLITE_LIMIT_LENGTH] ){ - sqlite3_result_error_toobig(context); - }else{ - sqlite3_result_zeroblob(context, (int)n); /* IMP: R-00293-64994 */ +SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse){ + AutoincInfo *p; /* Information about an AUTOINCREMENT */ + sqlite3 *db = pParse->db; /* The database connection */ + Db *pDb; /* Database only autoinc table */ + int memId; /* Register holding max rowid */ + int addr; /* A VDBE address */ + Vdbe *v = pParse->pVdbe; /* VDBE under construction */ + + /* This routine is never called during trigger-generation. It is + ** only called from the top-level */ + assert( pParse->pTriggerTab==0 ); + assert( pParse==sqlite3ParseToplevel(pParse) ); + + assert( v ); /* We failed long ago if this is not so */ + for(p = pParse->pAinc; p; p = p->pNext){ + pDb = &db->aDb[p->iDb]; + memId = p->regCtr; + assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); + sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenRead); + sqlite3VdbeAddOp3(v, OP_Null, 0, memId, memId+1); + addr = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp4(v, OP_String8, 0, memId-1, 0, p->pTab->zName, 0); + sqlite3VdbeAddOp2(v, OP_Rewind, 0, addr+9); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Column, 0, 0, memId); + sqlite3VdbeAddOp3(v, OP_Ne, memId-1, addr+7, memId); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL); + sqlite3VdbeAddOp2(v, OP_Rowid, 0, memId+1); + sqlite3VdbeAddOp3(v, OP_Column, 0, 1, memId); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addr+9); + sqlite3VdbeAddOp2(v, OP_Next, 0, addr+2); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Integer, 0, memId); + sqlite3VdbeAddOp0(v, OP_Close); } } /* -** The replace() function. Three arguments are all strings: call -** them A, B, and C. The result is also a string which is derived -** from A by replacing every occurance of B with C. The match -** must be exact. Collating sequences are not used. +** Update the maximum rowid for an autoincrement calculation. +** +** This routine should be called when the top of the stack holds a +** new rowid that is about to be inserted. If that new rowid is +** larger than the maximum rowid in the memId memory cell, then the +** memory cell is updated. The stack is unchanged. */ -static void replaceFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - const unsigned char *zStr; /* The input string A */ - const unsigned char *zPattern; /* The pattern string B */ - const unsigned char *zRep; /* The replacement string C */ - unsigned char *zOut; /* The output */ - int nStr; /* Size of zStr */ - int nPattern; /* Size of zPattern */ - int nRep; /* Size of zRep */ - i64 nOut; /* Maximum size of zOut */ - int loopLimit; /* Last zStr[] that might match zPattern[] */ - int i, j; /* Loop counters */ - - assert( argc==3 ); - UNUSED_PARAMETER(argc); - zStr = sqlite3_value_text(argv[0]); - if( zStr==0 ) return; - nStr = sqlite3_value_bytes(argv[0]); - assert( zStr==sqlite3_value_text(argv[0]) ); /* No encoding change */ - zPattern = sqlite3_value_text(argv[1]); - if( zPattern==0 ){ - assert( sqlite3_value_type(argv[1])==SQLITE_NULL - || sqlite3_context_db_handle(context)->mallocFailed ); - return; - } - if( zPattern[0]==0 ){ - assert( sqlite3_value_type(argv[1])!=SQLITE_NULL ); - sqlite3_result_value(context, argv[0]); - return; - } - nPattern = sqlite3_value_bytes(argv[1]); - assert( zPattern==sqlite3_value_text(argv[1]) ); /* No encoding change */ - zRep = sqlite3_value_text(argv[2]); - if( zRep==0 ) return; - nRep = sqlite3_value_bytes(argv[2]); - assert( zRep==sqlite3_value_text(argv[2]) ); - nOut = nStr + 1; - assert( nOut0 ){ + sqlite3VdbeAddOp2(pParse->pVdbe, OP_MemMax, memId, regRowid); } - loopLimit = nStr - nPattern; - for(i=j=0; i<=loopLimit; i++){ - if( zStr[i]!=zPattern[0] || memcmp(&zStr[i], zPattern, nPattern) ){ - zOut[j++] = zStr[i]; - }else{ - u8 *zOld; - sqlite3 *db = sqlite3_context_db_handle(context); - nOut += nRep - nPattern; - testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] ); - testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); - if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ - sqlite3_result_error_toobig(context); - sqlite3_free(zOut); - return; - } - zOld = zOut; - zOut = sqlite3_realloc(zOut, (int)nOut); - if( zOut==0 ){ - sqlite3_result_error_nomem(context); - sqlite3_free(zOld); - return; - } - memcpy(&zOut[j], zRep, nRep); - j += nRep; - i += nPattern-1; - } +} + +/* +** This routine generates the code needed to write autoincrement +** maximum rowid values back into the sqlite_sequence register. +** Every statement that might do an INSERT into an autoincrement +** table (either directly or through triggers) needs to call this +** routine just before the "exit" code. +*/ +SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse){ + AutoincInfo *p; + Vdbe *v = pParse->pVdbe; + sqlite3 *db = pParse->db; + + assert( v ); + for(p = pParse->pAinc; p; p = p->pNext){ + Db *pDb = &db->aDb[p->iDb]; + int j1; + int iRec; + int memId = p->regCtr; + + iRec = sqlite3GetTempReg(pParse); + assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); + sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenWrite); + j1 = sqlite3VdbeAddOp1(v, OP_NotNull, memId+1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_NewRowid, 0, memId+1); + sqlite3VdbeJumpHere(v, j1); + sqlite3VdbeAddOp3(v, OP_MakeRecord, memId-1, 2, iRec); + sqlite3VdbeAddOp3(v, OP_Insert, 0, iRec, memId+1); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3VdbeAddOp0(v, OP_Close); + sqlite3ReleaseTempReg(pParse, iRec); } - assert( j+nStr-i+1==nOut ); - memcpy(&zOut[j], &zStr[i], nStr-i); - j += nStr - i; - assert( j<=nOut ); - zOut[j] = 0; - sqlite3_result_text(context, (char*)zOut, j, sqlite3_free); } +#else +/* +** If SQLITE_OMIT_AUTOINCREMENT is defined, then the three routines +** above are all no-ops +*/ +# define autoIncBegin(A,B,C) (0) +# define autoIncStep(A,B,C) +#endif /* SQLITE_OMIT_AUTOINCREMENT */ + + +/* Forward declaration */ +static int xferOptimization( + Parse *pParse, /* Parser context */ + Table *pDest, /* The table we are inserting into */ + Select *pSelect, /* A SELECT statement to use as the data source */ + int onError, /* How to handle constraint errors */ + int iDbDest /* The database of pDest */ +); /* -** Implementation of the TRIM(), LTRIM(), and RTRIM() functions. -** The userdata is 0x1 for left trim, 0x2 for right trim, 0x3 for both. +** This routine is called to handle SQL of the following forms: +** +** insert into TABLE (IDLIST) values(EXPRLIST) +** insert into TABLE (IDLIST) select +** +** The IDLIST following the table name is always optional. If omitted, +** then a list of all columns for the table is substituted. The IDLIST +** appears in the pColumn parameter. pColumn is NULL if IDLIST is omitted. +** +** The pList parameter holds EXPRLIST in the first form of the INSERT +** statement above, and pSelect is NULL. For the second form, pList is +** NULL and pSelect is a pointer to the select statement used to generate +** data for the insert. +** +** The code generated follows one of four templates. For a simple +** insert with data coming from a VALUES clause, the code executes +** once straight down through. Pseudo-code follows (we call this +** the "1st template"): +** +** open write cursor to
and its indices +** put VALUES clause expressions into registers +** write the resulting record into
+** cleanup +** +** The three remaining templates assume the statement is of the form +** +** INSERT INTO
SELECT ... +** +** If the SELECT clause is of the restricted form "SELECT * FROM " - +** in other words if the SELECT pulls all columns from a single table +** and there is no WHERE or LIMIT or GROUP BY or ORDER BY clauses, and +** if and are distinct tables but have identical +** schemas, including all the same indices, then a special optimization +** is invoked that copies raw records from over to . +** See the xferOptimization() function for the implementation of this +** template. This is the 2nd template. +** +** open a write cursor to
+** open read cursor on +** transfer all records in over to
+** close cursors +** foreach index on
+** open a write cursor on the
index +** open a read cursor on the corresponding index +** transfer all records from the read to the write cursors +** close cursors +** end foreach +** +** The 3rd template is for when the second template does not apply +** and the SELECT clause does not read from
at any time. +** The generated code follows this template: +** +** X <- A +** goto B +** A: setup for the SELECT +** loop over the rows in the SELECT +** load values into registers R..R+n +** yield X +** end loop +** cleanup after the SELECT +** end-coroutine X +** B: open write cursor to
and its indices +** C: yield X, at EOF goto D +** insert the select result into
from R..R+n +** goto C +** D: cleanup +** +** The 4th template is used if the insert statement takes its +** values from a SELECT but the data is being inserted into a table +** that is also read as part of the SELECT. In the third form, +** we have to use an intermediate table to store the results of +** the select. The template is like this: +** +** X <- A +** goto B +** A: setup for the SELECT +** loop over the tables in the SELECT +** load value into register R..R+n +** yield X +** end loop +** cleanup after the SELECT +** end co-routine R +** B: open temp table +** L: yield X, at EOF goto M +** insert row from R..R+n into temp table +** goto L +** M: open write cursor to
and its indices +** rewind temp table +** C: loop over rows of intermediate table +** transfer values form intermediate table into
+** end loop +** D: cleanup */ -static void trimFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +SQLITE_PRIVATE void sqlite3Insert( + Parse *pParse, /* Parser context */ + SrcList *pTabList, /* Name of table into which we are inserting */ + Select *pSelect, /* A SELECT statement to use as the data source */ + IdList *pColumn, /* Column names corresponding to IDLIST. */ + int onError /* How to handle constraint errors */ ){ - const unsigned char *zIn; /* Input string */ - const unsigned char *zCharSet; /* Set of characters to trim */ - int nIn; /* Number of bytes in input */ - int flags; /* 1: trimleft 2: trimright 3: trim */ - int i; /* Loop counter */ - unsigned char *aLen = 0; /* Length of each character in zCharSet */ - unsigned char **azChar = 0; /* Individual characters in zCharSet */ - int nChar; /* Number of characters in zCharSet */ + sqlite3 *db; /* The main database structure */ + Table *pTab; /* The table to insert into. aka TABLE */ + char *zTab; /* Name of the table into which we are inserting */ + const char *zDb; /* Name of the database holding this table */ + int i, j, idx; /* Loop counters */ + Vdbe *v; /* Generate code into this virtual machine */ + Index *pIdx; /* For looping over indices of the table */ + int nColumn; /* Number of columns in the data */ + int nHidden = 0; /* Number of hidden columns if TABLE is virtual */ + int iDataCur = 0; /* VDBE cursor that is the main data repository */ + int iIdxCur = 0; /* First index cursor */ + int ipkColumn = -1; /* Column that is the INTEGER PRIMARY KEY */ + int endOfLoop; /* Label for the end of the insertion loop */ + int srcTab = 0; /* Data comes from this temporary cursor if >=0 */ + int addrInsTop = 0; /* Jump to label "D" */ + int addrCont = 0; /* Top of insert loop. Label "C" in templates 3 and 4 */ + SelectDest dest; /* Destination for SELECT on rhs of INSERT */ + int iDb; /* Index of database holding TABLE */ + Db *pDb; /* The database containing table being inserted into */ + u8 useTempTable = 0; /* Store SELECT results in intermediate table */ + u8 appendFlag = 0; /* True if the insert is likely to be an append */ + u8 withoutRowid; /* 0 for normal table. 1 for WITHOUT ROWID table */ + u8 bIdListInOrder = 1; /* True if IDLIST is in table order */ + ExprList *pList = 0; /* List of VALUES() to be inserted */ + + /* Register allocations */ + int regFromSelect = 0;/* Base register for data coming from SELECT */ + int regAutoinc = 0; /* Register holding the AUTOINCREMENT counter */ + int regRowCount = 0; /* Memory cell used for the row counter */ + int regIns; /* Block of regs holding rowid+data being inserted */ + int regRowid; /* registers holding insert rowid */ + int regData; /* register holding first column to insert */ + int *aRegIdx = 0; /* One register allocated to each index */ + +#ifndef SQLITE_OMIT_TRIGGER + int isView; /* True if attempting to insert into a view */ + Trigger *pTrigger; /* List of triggers on pTab, if required */ + int tmask; /* Mask of trigger times */ +#endif + + db = pParse->db; + memset(&dest, 0, sizeof(dest)); + if( pParse->nErr || db->mallocFailed ){ + goto insert_cleanup; + } + + /* If the Select object is really just a simple VALUES() list with a + ** single row values (the common case) then keep that one row of values + ** and go ahead and discard the Select object + */ + if( pSelect && (pSelect->selFlags & SF_Values)!=0 && pSelect->pPrior==0 ){ + pList = pSelect->pEList; + pSelect->pEList = 0; + sqlite3SelectDelete(db, pSelect); + pSelect = 0; + } + + /* Locate the table into which we will be inserting new information. + */ + assert( pTabList->nSrc==1 ); + zTab = pTabList->a[0].zName; + if( NEVER(zTab==0) ) goto insert_cleanup; + pTab = sqlite3SrcListLookup(pParse, pTabList); + if( pTab==0 ){ + goto insert_cleanup; + } + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + assert( iDbnDb ); + pDb = &db->aDb[iDb]; + zDb = pDb->zName; + if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0, zDb) ){ + goto insert_cleanup; + } + withoutRowid = !HasRowid(pTab); + + /* Figure out if we have any triggers and if the table being + ** inserted into is a view + */ +#ifndef SQLITE_OMIT_TRIGGER + pTrigger = sqlite3TriggersExist(pParse, pTab, TK_INSERT, 0, &tmask); + isView = pTab->pSelect!=0; +#else +# define pTrigger 0 +# define tmask 0 +# define isView 0 +#endif +#ifdef SQLITE_OMIT_VIEW +# undef isView +# define isView 0 +#endif + assert( (pTrigger && tmask) || (pTrigger==0 && tmask==0) ); + + /* If pTab is really a view, make sure it has been initialized. + ** ViewGetColumnNames() is a no-op if pTab is not a view. + */ + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ + goto insert_cleanup; + } + + /* Cannot insert into a read-only table. + */ + if( sqlite3IsReadOnly(pParse, pTab, tmask) ){ + goto insert_cleanup; + } + + /* Allocate a VDBE + */ + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto insert_cleanup; + if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); + sqlite3BeginWriteOperation(pParse, pSelect || pTrigger, iDb); + +#ifndef SQLITE_OMIT_XFER_OPT + /* If the statement is of the form + ** + ** INSERT INTO SELECT * FROM ; + ** + ** Then special optimizations can be applied that make the transfer + ** very fast and which reduce fragmentation of indices. + ** + ** This is the 2nd template. + */ + if( pColumn==0 && xferOptimization(pParse, pTab, pSelect, onError, iDb) ){ + assert( !pTrigger ); + assert( pList==0 ); + goto insert_end; + } +#endif /* SQLITE_OMIT_XFER_OPT */ - if( sqlite3_value_type(argv[0])==SQLITE_NULL ){ - return; + /* If this is an AUTOINCREMENT table, look up the sequence number in the + ** sqlite_sequence table and store it in memory cell regAutoinc. + */ + regAutoinc = autoIncBegin(pParse, iDb, pTab); + + /* Allocate registers for holding the rowid of the new row, + ** the content of the new row, and the assembled row record. + */ + regRowid = regIns = pParse->nMem+1; + pParse->nMem += pTab->nCol + 1; + if( IsVirtual(pTab) ){ + regRowid++; + pParse->nMem++; } - zIn = sqlite3_value_text(argv[0]); - if( zIn==0 ) return; - nIn = sqlite3_value_bytes(argv[0]); - assert( zIn==sqlite3_value_text(argv[0]) ); - if( argc==1 ){ - static const unsigned char lenOne[] = { 1 }; - static unsigned char * const azOne[] = { (u8*)" " }; - nChar = 1; - aLen = (u8*)lenOne; - azChar = (unsigned char **)azOne; - zCharSet = 0; - }else if( (zCharSet = sqlite3_value_text(argv[1]))==0 ){ - return; - }else{ - const unsigned char *z; - for(z=zCharSet, nChar=0; *z; nChar++){ - SQLITE_SKIP_UTF8(z); - } - if( nChar>0 ){ - azChar = contextMalloc(context, ((i64)nChar)*(sizeof(char*)+1)); - if( azChar==0 ){ - return; - } - aLen = (unsigned char*)&azChar[nChar]; - for(z=zCharSet, nChar=0; *z; nChar++){ - azChar[nChar] = (unsigned char *)z; - SQLITE_SKIP_UTF8(z); - aLen[nChar] = (u8)(z - azChar[nChar]); - } + regData = regRowid+1; + + /* If the INSERT statement included an IDLIST term, then make sure + ** all elements of the IDLIST really are columns of the table and + ** remember the column indices. + ** + ** If the table has an INTEGER PRIMARY KEY column and that column + ** is named in the IDLIST, then record in the ipkColumn variable + ** the index into IDLIST of the primary key column. ipkColumn is + ** the index of the primary key as it appears in IDLIST, not as + ** is appears in the original table. (The index of the INTEGER + ** PRIMARY KEY in the original table is pTab->iPKey.) + */ + if( pColumn ){ + for(i=0; inId; i++){ + pColumn->a[i].idx = -1; } - } - if( nChar>0 ){ - flags = SQLITE_PTR_TO_INT(sqlite3_user_data(context)); - if( flags & 1 ){ - while( nIn>0 ){ - int len = 0; - for(i=0; inId; i++){ + for(j=0; jnCol; j++){ + if( sqlite3StrICmp(pColumn->a[i].zName, pTab->aCol[j].zName)==0 ){ + pColumn->a[i].idx = j; + if( i!=j ) bIdListInOrder = 0; + if( j==pTab->iPKey ){ + ipkColumn = i; assert( !withoutRowid ); + } + break; } - if( i>=nChar ) break; - zIn += len; - nIn -= len; } - } - if( flags & 2 ){ - while( nIn>0 ){ - int len = 0; - for(i=0; i=pTab->nCol ){ + if( sqlite3IsRowid(pColumn->a[i].zName) && !withoutRowid ){ + ipkColumn = i; + bIdListInOrder = 0; + }else{ + sqlite3ErrorMsg(pParse, "table %S has no column named %s", + pTabList, 0, pColumn->a[i].zName); + pParse->checkSchema = 1; + goto insert_cleanup; } - if( i>=nChar ) break; - nIn -= len; } } - if( zCharSet ){ - sqlite3_free(azChar); - } } - sqlite3_result_text(context, (char*)zIn, nIn, SQLITE_TRANSIENT); -} + /* Figure out how many columns of data are supplied. If the data + ** is coming from a SELECT statement, then generate a co-routine that + ** produces a single row of the SELECT on each invocation. The + ** co-routine is the common header to the 3rd and 4th templates. + */ + if( pSelect ){ + /* Data is coming from a SELECT. Generate a co-routine to run the SELECT */ + int regYield; /* Register holding co-routine entry-point */ + int addrTop; /* Top of the co-routine */ + int rc; /* Result code */ + + regYield = ++pParse->nMem; + addrTop = sqlite3VdbeCurrentAddr(v) + 1; + sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, addrTop); + sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield); + dest.iSdst = bIdListInOrder ? regData : 0; + dest.nSdst = pTab->nCol; + rc = sqlite3Select(pParse, pSelect, &dest); + regFromSelect = dest.iSdst; + assert( pParse->nErr==0 || rc ); + if( rc || db->mallocFailed ) goto insert_cleanup; + sqlite3VdbeAddOp1(v, OP_EndCoroutine, regYield); + sqlite3VdbeJumpHere(v, addrTop - 1); /* label B: */ + assert( pSelect->pEList ); + nColumn = pSelect->pEList->nExpr; -/* IMP: R-25361-16150 This function is omitted from SQLite by default. It -** is only available if the SQLITE_SOUNDEX compile-time option is used -** when SQLite is built. -*/ -#ifdef SQLITE_SOUNDEX -/* -** Compute the soundex encoding of a word. -** -** IMP: R-59782-00072 The soundex(X) function returns a string that is the -** soundex encoding of the string X. -*/ -static void soundexFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - char zResult[8]; - const u8 *zIn; - int i, j; - static const unsigned char iCode[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 1, 2, 3, 0, 1, 2, 0, 0, 2, 2, 4, 5, 5, 0, - 1, 2, 6, 2, 3, 0, 1, 0, 2, 0, 2, 0, 0, 0, 0, 0, - 0, 0, 1, 2, 3, 0, 1, 2, 0, 0, 2, 2, 4, 5, 5, 0, - 1, 2, 6, 2, 3, 0, 1, 0, 2, 0, 2, 0, 0, 0, 0, 0, - }; - assert( argc==1 ); - zIn = (u8*)sqlite3_value_text(argv[0]); - if( zIn==0 ) zIn = (u8*)""; - for(i=0; zIn[i] && !sqlite3Isalpha(zIn[i]); i++){} - if( zIn[i] ){ - u8 prevcode = iCode[zIn[i]&0x7f]; - zResult[0] = sqlite3Toupper(zIn[i]); - for(j=1; j<4 && zIn[i]; i++){ - int code = iCode[zIn[i]&0x7f]; - if( code>0 ){ - if( code!=prevcode ){ - prevcode = code; - zResult[j++] = code + '0'; - } - }else{ - prevcode = 0; - } - } - while( j<4 ){ - zResult[j++] = '0'; + /* Set useTempTable to TRUE if the result of the SELECT statement + ** should be written into a temporary table (template 4). Set to + ** FALSE if each output row of the SELECT can be written directly into + ** the destination table (template 3). + ** + ** A temp table must be used if the table being updated is also one + ** of the tables being read by the SELECT statement. Also use a + ** temp table in the case of row triggers. + */ + if( pTrigger || readsTable(pParse, iDb, pTab) ){ + useTempTable = 1; } - zResult[j] = 0; - sqlite3_result_text(context, zResult, 4, SQLITE_TRANSIENT); - }else{ - /* IMP: R-64894-50321 The string "?000" is returned if the argument - ** is NULL or contains no ASCII alphabetic characters. */ - sqlite3_result_text(context, "?000", 4, SQLITE_STATIC); - } -} -#endif /* SQLITE_SOUNDEX */ -#ifndef SQLITE_OMIT_LOAD_EXTENSION -/* -** A function that loads a shared-library extension then returns NULL. -*/ -static void loadExt(sqlite3_context *context, int argc, sqlite3_value **argv){ - const char *zFile = (const char *)sqlite3_value_text(argv[0]); - const char *zProc; - sqlite3 *db = sqlite3_context_db_handle(context); - char *zErrMsg = 0; + if( useTempTable ){ + /* Invoke the coroutine to extract information from the SELECT + ** and add it to a transient table srcTab. The code generated + ** here is from the 4th template: + ** + ** B: open temp table + ** L: yield X, goto M at EOF + ** insert row from R..R+n into temp table + ** goto L + ** M: ... + */ + int regRec; /* Register to hold packed record */ + int regTempRowid; /* Register to hold temp table ROWID */ + int addrL; /* Label "L" */ - if( argc==2 ){ - zProc = (const char *)sqlite3_value_text(argv[1]); + srcTab = pParse->nTab++; + regRec = sqlite3GetTempReg(pParse); + regTempRowid = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, srcTab, nColumn); + addrL = sqlite3VdbeAddOp1(v, OP_Yield, dest.iSDParm); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regFromSelect, nColumn, regRec); + sqlite3VdbeAddOp2(v, OP_NewRowid, srcTab, regTempRowid); + sqlite3VdbeAddOp3(v, OP_Insert, srcTab, regRec, regTempRowid); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrL); + sqlite3VdbeJumpHere(v, addrL); + sqlite3ReleaseTempReg(pParse, regRec); + sqlite3ReleaseTempReg(pParse, regTempRowid); + } }else{ - zProc = 0; - } - if( zFile && sqlite3_load_extension(db, zFile, zProc, &zErrMsg) ){ - sqlite3_result_error(context, zErrMsg, -1); - sqlite3_free(zErrMsg); + /* This is the case if the data for the INSERT is coming from a VALUES + ** clause + */ + NameContext sNC; + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + srcTab = -1; + assert( useTempTable==0 ); + nColumn = pList ? pList->nExpr : 0; + for(i=0; ia[i].pExpr) ){ + goto insert_cleanup; + } + } } -} -#endif + /* If there is no IDLIST term but the table has an integer primary + ** key, the set the ipkColumn variable to the integer primary key + ** column index in the original table definition. + */ + if( pColumn==0 && nColumn>0 ){ + ipkColumn = pTab->iPKey; + } -/* -** An instance of the following structure holds the context of a -** sum() or avg() aggregate computation. -*/ -typedef struct SumCtx SumCtx; -struct SumCtx { - double rSum; /* Floating point sum */ - i64 iSum; /* Integer sum */ - i64 cnt; /* Number of elements summed */ - u8 overflow; /* True if integer overflow seen */ - u8 approx; /* True if non-integer value was input to the sum */ -}; - -/* -** Routines used to compute the sum, average, and total. -** -** The SUM() function follows the (broken) SQL standard which means -** that it returns NULL if it sums over no inputs. TOTAL returns -** 0.0 in that case. In addition, TOTAL always returns a float where -** SUM might return an integer if it never encounters a floating point -** value. TOTAL never fails, but SUM might through an exception if -** it overflows an integer. -*/ -static void sumStep(sqlite3_context *context, int argc, sqlite3_value **argv){ - SumCtx *p; - int type; - assert( argc==1 ); - UNUSED_PARAMETER(argc); - p = sqlite3_aggregate_context(context, sizeof(*p)); - type = sqlite3_value_numeric_type(argv[0]); - if( p && type!=SQLITE_NULL ){ - p->cnt++; - if( type==SQLITE_INTEGER ){ - i64 v = sqlite3_value_int64(argv[0]); - p->rSum += v; - if( (p->approx|p->overflow)==0 && sqlite3AddInt64(&p->iSum, v) ){ - p->overflow = 1; - } - }else{ - p->rSum += sqlite3_value_double(argv[0]); - p->approx = 1; + /* Make sure the number of columns in the source data matches the number + ** of columns to be inserted into the table. + */ + if( IsVirtual(pTab) ){ + for(i=0; inCol; i++){ + nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0); } } -} -static void sumFinalize(sqlite3_context *context){ - SumCtx *p; - p = sqlite3_aggregate_context(context, 0); - if( p && p->cnt>0 ){ - if( p->overflow ){ - sqlite3_result_error(context,"integer overflow",-1); - }else if( p->approx ){ - sqlite3_result_double(context, p->rSum); - }else{ - sqlite3_result_int64(context, p->iSum); - } + if( pColumn==0 && nColumn && nColumn!=(pTab->nCol-nHidden) ){ + sqlite3ErrorMsg(pParse, + "table %S has %d columns but %d values were supplied", + pTabList, 0, pTab->nCol-nHidden, nColumn); + goto insert_cleanup; } -} -static void avgFinalize(sqlite3_context *context){ - SumCtx *p; - p = sqlite3_aggregate_context(context, 0); - if( p && p->cnt>0 ){ - sqlite3_result_double(context, p->rSum/(double)p->cnt); + if( pColumn!=0 && nColumn!=pColumn->nId ){ + sqlite3ErrorMsg(pParse, "%d values for %d columns", nColumn, pColumn->nId); + goto insert_cleanup; + } + + /* Initialize the count of rows to be inserted + */ + if( db->flags & SQLITE_CountRows ){ + regRowCount = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); } -} -static void totalFinalize(sqlite3_context *context){ - SumCtx *p; - p = sqlite3_aggregate_context(context, 0); - /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ - sqlite3_result_double(context, p ? p->rSum : (double)0); -} -/* -** The following structure keeps track of state information for the -** count() aggregate function. -*/ -typedef struct CountCtx CountCtx; -struct CountCtx { - i64 n; -}; + /* If this is not a view, open the table and and all indices */ + if( !isView ){ + int nIdx; + nIdx = sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, -1, 0, + &iDataCur, &iIdxCur); + aRegIdx = sqlite3DbMallocRaw(db, sizeof(int)*(nIdx+1)); + if( aRegIdx==0 ){ + goto insert_cleanup; + } + for(i=0; inMem; + } + } -/* -** Routines to implement the count() aggregate function. -*/ -static void countStep(sqlite3_context *context, int argc, sqlite3_value **argv){ - CountCtx *p; - p = sqlite3_aggregate_context(context, sizeof(*p)); - if( (argc==0 || SQLITE_NULL!=sqlite3_value_type(argv[0])) && p ){ - p->n++; + /* This is the top of the main insertion loop */ + if( useTempTable ){ + /* This block codes the top of loop only. The complete loop is the + ** following pseudocode (template 4): + ** + ** rewind temp table, if empty goto D + ** C: loop over rows of intermediate table + ** transfer values form intermediate table into
+ ** end loop + ** D: ... + */ + addrInsTop = sqlite3VdbeAddOp1(v, OP_Rewind, srcTab); VdbeCoverage(v); + addrCont = sqlite3VdbeCurrentAddr(v); + }else if( pSelect ){ + /* This block codes the top of loop only. The complete loop is the + ** following pseudocode (template 3): + ** + ** C: yield X, at EOF goto D + ** insert the select result into
from R..R+n + ** goto C + ** D: ... + */ + addrInsTop = addrCont = sqlite3VdbeAddOp1(v, OP_Yield, dest.iSDParm); + VdbeCoverage(v); } -#ifndef SQLITE_OMIT_DEPRECATED - /* The sqlite3_aggregate_count() function is deprecated. But just to make - ** sure it still operates correctly, verify that its count agrees with our - ** internal count when using count(*) and when the total count can be - ** expressed as a 32-bit integer. */ - assert( argc==1 || p==0 || p->n>0x7fffffff - || p->n==sqlite3_aggregate_count(context) ); -#endif -} -static void countFinalize(sqlite3_context *context){ - CountCtx *p; - p = sqlite3_aggregate_context(context, 0); - sqlite3_result_int64(context, p ? p->n : 0); -} + /* Run the BEFORE and INSTEAD OF triggers, if there are any + */ + endOfLoop = sqlite3VdbeMakeLabel(v); + if( tmask & TRIGGER_BEFORE ){ + int regCols = sqlite3GetTempRange(pParse, pTab->nCol+1); -/* -** Routines to implement min() and max() aggregate functions. -*/ -static void minmaxStep( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - Mem *pArg = (Mem *)argv[0]; - Mem *pBest; - UNUSED_PARAMETER(NotUsed); + /* build the NEW.* reference row. Note that if there is an INTEGER + ** PRIMARY KEY into which a NULL is being inserted, that NULL will be + ** translated into a unique ID for the row. But on a BEFORE trigger, + ** we do not know what the unique ID will be (because the insert has + ** not happened yet) so we substitute a rowid of -1 + */ + if( ipkColumn<0 ){ + sqlite3VdbeAddOp2(v, OP_Integer, -1, regCols); + }else{ + int j1; + assert( !withoutRowid ); + if( useTempTable ){ + sqlite3VdbeAddOp3(v, OP_Column, srcTab, ipkColumn, regCols); + }else{ + assert( pSelect==0 ); /* Otherwise useTempTable is true */ + sqlite3ExprCode(pParse, pList->a[ipkColumn].pExpr, regCols); + } + j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regCols); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Integer, -1, regCols); + sqlite3VdbeJumpHere(v, j1); + sqlite3VdbeAddOp1(v, OP_MustBeInt, regCols); VdbeCoverage(v); + } - if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; - pBest = (Mem *)sqlite3_aggregate_context(context, sizeof(*pBest)); - if( !pBest ) return; + /* Cannot have triggers on a virtual table. If it were possible, + ** this block would have to account for hidden column. + */ + assert( !IsVirtual(pTab) ); - if( pBest->flags ){ - int max; - int cmp; - CollSeq *pColl = sqlite3GetFuncCollSeq(context); - /* This step function is used for both the min() and max() aggregates, - ** the only difference between the two being that the sense of the - ** comparison is inverted. For the max() aggregate, the - ** sqlite3_user_data() function returns (void *)-1. For min() it - ** returns (void *)db, where db is the sqlite3* database pointer. - ** Therefore the next statement sets variable 'max' to 1 for the max() - ** aggregate, or 0 for min(). + /* Create the new column data */ - max = sqlite3_user_data(context)!=0; - cmp = sqlite3MemCompare(pBest, pArg, pColl); - if( (max && cmp<0) || (!max && cmp>0) ){ - sqlite3VdbeMemCopy(pBest, pArg); + for(i=0; inCol; i++){ + if( pColumn==0 ){ + j = i; + }else{ + for(j=0; jnId; j++){ + if( pColumn->a[j].idx==i ) break; + } + } + if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId) ){ + sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regCols+i+1); + }else if( useTempTable ){ + sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, regCols+i+1); + }else{ + assert( pSelect==0 ); /* Otherwise useTempTable is true */ + sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr, regCols+i+1); + } } - }else{ - sqlite3VdbeMemCopy(pBest, pArg); - } -} -static void minMaxFinalize(sqlite3_context *context){ - sqlite3_value *pRes; - pRes = (sqlite3_value *)sqlite3_aggregate_context(context, 0); - if( pRes ){ - if( ALWAYS(pRes->flags) ){ - sqlite3_result_value(context, pRes); + + /* If this is an INSERT on a view with an INSTEAD OF INSERT trigger, + ** do not attempt any conversions before assembling the record. + ** If this is a real table, attempt conversions as required by the + ** table column affinities. + */ + if( !isView ){ + sqlite3TableAffinity(v, pTab, regCols+1); } - sqlite3VdbeMemRelease(pRes); + + /* Fire BEFORE or INSTEAD OF triggers */ + sqlite3CodeRowTrigger(pParse, pTrigger, TK_INSERT, 0, TRIGGER_BEFORE, + pTab, regCols-pTab->nCol-1, onError, endOfLoop); + + sqlite3ReleaseTempRange(pParse, regCols, pTab->nCol+1); } -} -/* -** group_concat(EXPR, ?SEPARATOR?) -*/ -static void groupConcatStep( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - const char *zVal; - StrAccum *pAccum; - const char *zSep; - int nVal, nSep; - assert( argc==1 || argc==2 ); - if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; - pAccum = (StrAccum*)sqlite3_aggregate_context(context, sizeof(*pAccum)); + /* Compute the content of the next row to insert into a range of + ** registers beginning at regIns. + */ + if( !isView ){ + if( IsVirtual(pTab) ){ + /* The row that the VUpdate opcode will delete: none */ + sqlite3VdbeAddOp2(v, OP_Null, 0, regIns); + } + if( ipkColumn>=0 ){ + if( useTempTable ){ + sqlite3VdbeAddOp3(v, OP_Column, srcTab, ipkColumn, regRowid); + }else if( pSelect ){ + sqlite3VdbeAddOp2(v, OP_Copy, regFromSelect+ipkColumn, regRowid); + }else{ + VdbeOp *pOp; + sqlite3ExprCode(pParse, pList->a[ipkColumn].pExpr, regRowid); + pOp = sqlite3VdbeGetOp(v, -1); + if( ALWAYS(pOp) && pOp->opcode==OP_Null && !IsVirtual(pTab) ){ + appendFlag = 1; + pOp->opcode = OP_NewRowid; + pOp->p1 = iDataCur; + pOp->p2 = regRowid; + pOp->p3 = regAutoinc; + } + } + /* If the PRIMARY KEY expression is NULL, then use OP_NewRowid + ** to generate a unique primary key value. + */ + if( !appendFlag ){ + int j1; + if( !IsVirtual(pTab) ){ + j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regRowid); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NewRowid, iDataCur, regRowid, regAutoinc); + sqlite3VdbeJumpHere(v, j1); + }else{ + j1 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_IsNull, regRowid, j1+2); VdbeCoverage(v); + } + sqlite3VdbeAddOp1(v, OP_MustBeInt, regRowid); VdbeCoverage(v); + } + }else if( IsVirtual(pTab) || withoutRowid ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, regRowid); + }else{ + sqlite3VdbeAddOp3(v, OP_NewRowid, iDataCur, regRowid, regAutoinc); + appendFlag = 1; + } + autoIncStep(pParse, regAutoinc, regRowid); - if( pAccum ){ - sqlite3 *db = sqlite3_context_db_handle(context); - int firstTerm = pAccum->useMalloc==0; - pAccum->useMalloc = 2; - pAccum->mxAlloc = db->aLimit[SQLITE_LIMIT_LENGTH]; - if( !firstTerm ){ - if( argc==2 ){ - zSep = (char*)sqlite3_value_text(argv[1]); - nSep = sqlite3_value_bytes(argv[1]); + /* Compute data for all columns of the new entry, beginning + ** with the first column. + */ + nHidden = 0; + for(i=0; inCol; i++){ + int iRegStore = regRowid+1+i; + if( i==pTab->iPKey ){ + /* The value of the INTEGER PRIMARY KEY column is always a NULL. + ** Whenever this column is read, the rowid will be substituted + ** in its place. Hence, fill this column with a NULL to avoid + ** taking up data space with information that will never be used. + ** As there may be shallow copies of this value, make it a soft-NULL */ + sqlite3VdbeAddOp1(v, OP_SoftNull, iRegStore); + continue; + } + if( pColumn==0 ){ + if( IsHiddenColumn(&pTab->aCol[i]) ){ + assert( IsVirtual(pTab) ); + j = -1; + nHidden++; + }else{ + j = i - nHidden; + } }else{ - zSep = ","; - nSep = 1; + for(j=0; jnId; j++){ + if( pColumn->a[j].idx==i ) break; + } + } + if( j<0 || nColumn==0 || (pColumn && j>=pColumn->nId) ){ + sqlite3ExprCodeFactorable(pParse, pTab->aCol[i].pDflt, iRegStore); + }else if( useTempTable ){ + sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, iRegStore); + }else if( pSelect ){ + if( regFromSelect!=regData ){ + sqlite3VdbeAddOp2(v, OP_SCopy, regFromSelect+j, iRegStore); + } + }else{ + sqlite3ExprCode(pParse, pList->a[j].pExpr, iRegStore); } - sqlite3StrAccumAppend(pAccum, zSep, nSep); } - zVal = (char*)sqlite3_value_text(argv[0]); - nVal = sqlite3_value_bytes(argv[0]); - sqlite3StrAccumAppend(pAccum, zVal, nVal); - } -} -static void groupConcatFinalize(sqlite3_context *context){ - StrAccum *pAccum; - pAccum = sqlite3_aggregate_context(context, 0); - if( pAccum ){ - if( pAccum->tooBig ){ - sqlite3_result_error_toobig(context); - }else if( pAccum->mallocFailed ){ - sqlite3_result_error_nomem(context); - }else{ - sqlite3_result_text(context, sqlite3StrAccumFinish(pAccum), -1, - sqlite3_free); + + /* Generate code to check constraints and generate index keys and + ** do the insertion. + */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); + sqlite3VtabMakeWritable(pParse, pTab); + sqlite3VdbeAddOp4(v, OP_VUpdate, 1, pTab->nCol+2, regIns, pVTab, P4_VTAB); + sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError); + sqlite3MayAbort(pParse); + }else +#endif + { + int isReplace; /* Set to true if constraints may cause a replace */ + sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, + regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace + ); + sqlite3FkCheck(pParse, pTab, 0, regIns, 0, 0); + sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur, + regIns, aRegIdx, 0, appendFlag, isReplace==0); } } -} -/* -** This routine does per-connection function registration. Most -** of the built-in functions above are part of the global function set. -** This routine only deals with those that are not global. -*/ -SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3 *db){ - int rc = sqlite3_overload_function(db, "MATCH", 2); - assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); - if( rc==SQLITE_NOMEM ){ - db->mallocFailed = 1; + /* Update the count of rows that are inserted + */ + if( (db->flags & SQLITE_CountRows)!=0 ){ + sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); } -} -/* -** Set the LIKEOPT flag on the 2-argument function with the given name. -*/ -static void setLikeOptFlag(sqlite3 *db, const char *zName, u8 flagVal){ - FuncDef *pDef; - pDef = sqlite3FindFunction(db, zName, sqlite3Strlen30(zName), - 2, SQLITE_UTF8, 0); - if( ALWAYS(pDef) ){ - pDef->flags = flagVal; + if( pTrigger ){ + /* Code AFTER triggers */ + sqlite3CodeRowTrigger(pParse, pTrigger, TK_INSERT, 0, TRIGGER_AFTER, + pTab, regData-2-pTab->nCol, onError, endOfLoop); } -} -/* -** Register the built-in LIKE and GLOB functions. The caseSensitive -** parameter determines whether or not the LIKE operator is case -** sensitive. GLOB is always case sensitive. -*/ -SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3 *db, int caseSensitive){ - struct compareInfo *pInfo; - if( caseSensitive ){ - pInfo = (struct compareInfo*)&likeInfoAlt; - }else{ - pInfo = (struct compareInfo*)&likeInfoNorm; + /* The bottom of the main insertion loop, if the data source + ** is a SELECT statement. + */ + sqlite3VdbeResolveLabel(v, endOfLoop); + if( useTempTable ){ + sqlite3VdbeAddOp2(v, OP_Next, srcTab, addrCont); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addrInsTop); + sqlite3VdbeAddOp1(v, OP_Close, srcTab); + }else if( pSelect ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrCont); + sqlite3VdbeJumpHere(v, addrInsTop); } - sqlite3CreateFunc(db, "like", 2, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); - sqlite3CreateFunc(db, "like", 3, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); - sqlite3CreateFunc(db, "glob", 2, SQLITE_UTF8, - (struct compareInfo*)&globInfo, likeFunc, 0, 0, 0); - setLikeOptFlag(db, "glob", SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE); - setLikeOptFlag(db, "like", - caseSensitive ? (SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE) : SQLITE_FUNC_LIKE); -} -/* -** pExpr points to an expression which implements a function. If -** it is appropriate to apply the LIKE optimization to that function -** then set aWc[0] through aWc[2] to the wildcard characters and -** return TRUE. If the function is not a LIKE-style function then -** return FALSE. -*/ -SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3 *db, Expr *pExpr, int *pIsNocase, char *aWc){ - FuncDef *pDef; - if( pExpr->op!=TK_FUNCTION - || !pExpr->x.pList - || pExpr->x.pList->nExpr!=2 - ){ - return 0; - } - assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - pDef = sqlite3FindFunction(db, pExpr->u.zToken, - sqlite3Strlen30(pExpr->u.zToken), - 2, SQLITE_UTF8, 0); - if( NEVER(pDef==0) || (pDef->flags & SQLITE_FUNC_LIKE)==0 ){ - return 0; + if( !IsVirtual(pTab) && !isView ){ + /* Close all tables opened */ + if( iDataCurpIndex; pIdx; pIdx=pIdx->pNext, idx++){ + sqlite3VdbeAddOp1(v, OP_Close, idx+iIdxCur); + } } - /* The memcpy() statement assumes that the wildcard characters are - ** the first three statements in the compareInfo structure. The - ** asserts() that follow verify that assumption +insert_end: + /* Update the sqlite_sequence table by storing the content of the + ** maximum rowid counter values recorded while inserting into + ** autoincrement tables. */ - memcpy(aWc, pDef->pUserData, 3); - assert( (char*)&likeInfoAlt == (char*)&likeInfoAlt.matchAll ); - assert( &((char*)&likeInfoAlt)[1] == (char*)&likeInfoAlt.matchOne ); - assert( &((char*)&likeInfoAlt)[2] == (char*)&likeInfoAlt.matchSet ); - *pIsNocase = (pDef->flags & SQLITE_FUNC_CASE)==0; - return 1; -} + if( pParse->nested==0 && pParse->pTriggerTab==0 ){ + sqlite3AutoincrementEnd(pParse); + } -/* -** All all of the FuncDef structures in the aBuiltinFunc[] array above -** to the global function hash table. This occurs at start-time (as -** a consequence of calling sqlite3_initialize()). -** -** After this routine runs -*/ -SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void){ /* - ** The following array holds FuncDef structures for all of the functions - ** defined in this file. - ** - ** The array cannot be constant since changes are made to the - ** FuncDef.pHash elements at start-time. The elements of this array - ** are read-only after initialization is complete. + ** Return the number of rows inserted. If this routine is + ** generating code because of a call to sqlite3NestedParse(), do not + ** invoke the callback function. */ - static SQLITE_WSD FuncDef aBuiltinFunc[] = { - FUNCTION(ltrim, 1, 1, 0, trimFunc ), - FUNCTION(ltrim, 2, 1, 0, trimFunc ), - FUNCTION(rtrim, 1, 2, 0, trimFunc ), - FUNCTION(rtrim, 2, 2, 0, trimFunc ), - FUNCTION(trim, 1, 3, 0, trimFunc ), - FUNCTION(trim, 2, 3, 0, trimFunc ), - FUNCTION(min, -1, 0, 1, minmaxFunc ), - FUNCTION(min, 0, 0, 1, 0 ), - AGGREGATE(min, 1, 0, 1, minmaxStep, minMaxFinalize ), - FUNCTION(max, -1, 1, 1, minmaxFunc ), - FUNCTION(max, 0, 1, 1, 0 ), - AGGREGATE(max, 1, 1, 1, minmaxStep, minMaxFinalize ), - FUNCTION(typeof, 1, 0, 0, typeofFunc ), - FUNCTION(length, 1, 0, 0, lengthFunc ), - FUNCTION(substr, 2, 0, 0, substrFunc ), - FUNCTION(substr, 3, 0, 0, substrFunc ), - FUNCTION(abs, 1, 0, 0, absFunc ), -#ifndef SQLITE_OMIT_FLOATING_POINT - FUNCTION(round, 1, 0, 0, roundFunc ), - FUNCTION(round, 2, 0, 0, roundFunc ), -#endif - FUNCTION(upper, 1, 0, 0, upperFunc ), - FUNCTION(lower, 1, 0, 0, lowerFunc ), - FUNCTION(coalesce, 1, 0, 0, 0 ), - FUNCTION(coalesce, 0, 0, 0, 0 ), -/* FUNCTION(coalesce, -1, 0, 0, ifnullFunc ), */ - {-1,SQLITE_UTF8,SQLITE_FUNC_COALESCE,0,0,ifnullFunc,0,0,"coalesce",0,0}, - FUNCTION(hex, 1, 0, 0, hexFunc ), -/* FUNCTION(ifnull, 2, 0, 0, ifnullFunc ), */ - {2,SQLITE_UTF8,SQLITE_FUNC_COALESCE,0,0,ifnullFunc,0,0,"ifnull",0,0}, - FUNCTION(random, 0, 0, 0, randomFunc ), - FUNCTION(randomblob, 1, 0, 0, randomBlob ), - FUNCTION(nullif, 2, 0, 1, nullifFunc ), - FUNCTION(sqlite_version, 0, 0, 0, versionFunc ), - FUNCTION(sqlite_source_id, 0, 0, 0, sourceidFunc ), - FUNCTION(sqlite_log, 2, 0, 0, errlogFunc ), -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS - FUNCTION(sqlite_compileoption_used,1, 0, 0, compileoptionusedFunc ), - FUNCTION(sqlite_compileoption_get, 1, 0, 0, compileoptiongetFunc ), -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - FUNCTION(quote, 1, 0, 0, quoteFunc ), - FUNCTION(last_insert_rowid, 0, 0, 0, last_insert_rowid), - FUNCTION(changes, 0, 0, 0, changes ), - FUNCTION(total_changes, 0, 0, 0, total_changes ), - FUNCTION(replace, 3, 0, 0, replaceFunc ), - FUNCTION(zeroblob, 1, 0, 0, zeroblobFunc ), - #ifdef SQLITE_SOUNDEX - FUNCTION(soundex, 1, 0, 0, soundexFunc ), - #endif - #ifndef SQLITE_OMIT_LOAD_EXTENSION - FUNCTION(load_extension, 1, 0, 0, loadExt ), - FUNCTION(load_extension, 2, 0, 0, loadExt ), - #endif - AGGREGATE(sum, 1, 0, 0, sumStep, sumFinalize ), - AGGREGATE(total, 1, 0, 0, sumStep, totalFinalize ), - AGGREGATE(avg, 1, 0, 0, sumStep, avgFinalize ), - /* AGGREGATE(count, 0, 0, 0, countStep, countFinalize ), */ - {0,SQLITE_UTF8,SQLITE_FUNC_COUNT,0,0,0,countStep,countFinalize,"count",0,0}, - AGGREGATE(count, 1, 0, 0, countStep, countFinalize ), - AGGREGATE(group_concat, 1, 0, 0, groupConcatStep, groupConcatFinalize), - AGGREGATE(group_concat, 2, 0, 0, groupConcatStep, groupConcatFinalize), - - LIKEFUNC(glob, 2, &globInfo, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), - #ifdef SQLITE_CASE_SENSITIVE_LIKE - LIKEFUNC(like, 2, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), - LIKEFUNC(like, 3, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), - #else - LIKEFUNC(like, 2, &likeInfoNorm, SQLITE_FUNC_LIKE), - LIKEFUNC(like, 3, &likeInfoNorm, SQLITE_FUNC_LIKE), - #endif - }; - - int i; - FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); - FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aBuiltinFunc); - - for(i=0; iflags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows inserted", SQLITE_STATIC); } - sqlite3RegisterDateTimeFunctions(); -#ifndef SQLITE_OMIT_ALTERTABLE - sqlite3AlterFunctions(); -#endif -} -/************** End of func.c ************************************************/ -/************** Begin file fkey.c ********************************************/ -/* -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code used by the compiler to add foreign key -** support to compiled SQL statements. -*/ +insert_cleanup: + sqlite3SrcListDelete(db, pTabList); + sqlite3ExprListDelete(db, pList); + sqlite3SelectDelete(db, pSelect); + sqlite3IdListDelete(db, pColumn); + sqlite3DbFree(db, aRegIdx); +} -#ifndef SQLITE_OMIT_FOREIGN_KEY -#ifndef SQLITE_OMIT_TRIGGER +/* Make sure "isView" and other macros defined above are undefined. Otherwise +** they may interfere with compilation of other functions in this file +** (or in another file, if this file becomes part of the amalgamation). */ +#ifdef isView + #undef isView +#endif +#ifdef pTrigger + #undef pTrigger +#endif +#ifdef tmask + #undef tmask +#endif /* -** Deferred and Immediate FKs -** -------------------------- -** -** Foreign keys in SQLite come in two flavours: deferred and immediate. -** If an immediate foreign key constraint is violated, SQLITE_CONSTRAINT -** is returned and the current statement transaction rolled back. If a -** deferred foreign key constraint is violated, no action is taken -** immediately. However if the application attempts to commit the -** transaction before fixing the constraint violation, the attempt fails. -** -** Deferred constraints are implemented using a simple counter associated -** with the database handle. The counter is set to zero each time a -** database transaction is opened. Each time a statement is executed -** that causes a foreign key violation, the counter is incremented. Each -** time a statement is executed that removes an existing violation from -** the database, the counter is decremented. When the transaction is -** committed, the commit fails if the current value of the counter is -** greater than zero. This scheme has two big drawbacks: -** -** * When a commit fails due to a deferred foreign key constraint, -** there is no way to tell which foreign constraint is not satisfied, -** or which row it is not satisfied for. -** -** * If the database contains foreign key violations when the -** transaction is opened, this may cause the mechanism to malfunction. -** -** Despite these problems, this approach is adopted as it seems simpler -** than the alternatives. -** -** INSERT operations: -** -** I.1) For each FK for which the table is the child table, search -** the parent table for a match. If none is found increment the -** constraint counter. -** -** I.2) For each FK for which the table is the parent table, -** search the child table for rows that correspond to the new -** row in the parent table. Decrement the counter for each row -** found (as the constraint is now satisfied). -** -** DELETE operations: +** Generate code to do constraint checks prior to an INSERT or an UPDATE +** on table pTab. ** -** D.1) For each FK for which the table is the child table, -** search the parent table for a row that corresponds to the -** deleted row in the child table. If such a row is not found, -** decrement the counter. +** The regNewData parameter is the first register in a range that contains +** the data to be inserted or the data after the update. There will be +** pTab->nCol+1 registers in this range. The first register (the one +** that regNewData points to) will contain the new rowid, or NULL in the +** case of a WITHOUT ROWID table. The second register in the range will +** contain the content of the first table column. The third register will +** contain the content of the second table column. And so forth. ** -** D.2) For each FK for which the table is the parent table, search -** the child table for rows that correspond to the deleted row -** in the parent table. For each found increment the counter. +** The regOldData parameter is similar to regNewData except that it contains +** the data prior to an UPDATE rather than afterwards. regOldData is zero +** for an INSERT. This routine can distinguish between UPDATE and INSERT by +** checking regOldData for zero. ** -** UPDATE operations: +** For an UPDATE, the pkChng boolean is true if the true primary key (the +** rowid for a normal table or the PRIMARY KEY for a WITHOUT ROWID table) +** might be modified by the UPDATE. If pkChng is false, then the key of +** the iDataCur content table is guaranteed to be unchanged by the UPDATE. ** -** An UPDATE command requires that all 4 steps above are taken, but only -** for FK constraints for which the affected columns are actually -** modified (values must be compared at runtime). +** For an INSERT, the pkChng boolean indicates whether or not the rowid +** was explicitly specified as part of the INSERT statement. If pkChng +** is zero, it means that the either rowid is computed automatically or +** that the table is a WITHOUT ROWID table and has no rowid. On an INSERT, +** pkChng will only be true if the INSERT statement provides an integer +** value for either the rowid column or its INTEGER PRIMARY KEY alias. ** -** Note that I.1 and D.1 are very similar operations, as are I.2 and D.2. -** This simplifies the implementation a bit. +** The code generated by this routine will store new index entries into +** registers identified by aRegIdx[]. No index entry is created for +** indices where aRegIdx[i]==0. The order of indices in aRegIdx[] is +** the same as the order of indices on the linked list of indices +** at pTab->pIndex. ** -** For the purposes of immediate FK constraints, the OR REPLACE conflict -** resolution is considered to delete rows before the new row is inserted. -** If a delete caused by OR REPLACE violates an FK constraint, an exception -** is thrown, even if the FK constraint would be satisfied after the new -** row is inserted. +** The caller must have already opened writeable cursors on the main +** table and all applicable indices (that is to say, all indices for which +** aRegIdx[] is not zero). iDataCur is the cursor for the main table when +** inserting or updating a rowid table, or the cursor for the PRIMARY KEY +** index when operating on a WITHOUT ROWID table. iIdxCur is the cursor +** for the first index in the pTab->pIndex list. Cursors for other indices +** are at iIdxCur+N for the N-th element of the pTab->pIndex list. ** -** Immediate constraints are usually handled similarly. The only difference -** is that the counter used is stored as part of each individual statement -** object (struct Vdbe). If, after the statement has run, its immediate -** constraint counter is greater than zero, it returns SQLITE_CONSTRAINT -** and the statement transaction is rolled back. An exception is an INSERT -** statement that inserts a single row only (no triggers). In this case, -** instead of using a counter, an exception is thrown immediately if the -** INSERT violates a foreign key constraint. This is necessary as such -** an INSERT does not open a statement transaction. +** This routine also generates code to check constraints. NOT NULL, +** CHECK, and UNIQUE constraints are all checked. If a constraint fails, +** then the appropriate action is performed. There are five possible +** actions: ROLLBACK, ABORT, FAIL, REPLACE, and IGNORE. ** -** TODO: How should dropping a table be handled? How should renaming a -** table be handled? +** Constraint type Action What Happens +** --------------- ---------- ---------------------------------------- +** any ROLLBACK The current transaction is rolled back and +** sqlite3_step() returns immediately with a +** return code of SQLITE_CONSTRAINT. ** +** any ABORT Back out changes from the current command +** only (do not do a complete rollback) then +** cause sqlite3_step() to return immediately +** with SQLITE_CONSTRAINT. ** -** Query API Notes -** --------------- +** any FAIL Sqlite3_step() returns immediately with a +** return code of SQLITE_CONSTRAINT. The +** transaction is not rolled back and any +** changes to prior rows are retained. ** -** Before coding an UPDATE or DELETE row operation, the code-generator -** for those two operations needs to know whether or not the operation -** requires any FK processing and, if so, which columns of the original -** row are required by the FK processing VDBE code (i.e. if FKs were -** implemented using triggers, which of the old.* columns would be -** accessed). No information is required by the code-generator before -** coding an INSERT operation. The functions used by the UPDATE/DELETE -** generation code to query for this information are: +** any IGNORE The attempt in insert or update the current +** row is skipped, without throwing an error. +** Processing continues with the next row. +** (There is an immediate jump to ignoreDest.) ** -** sqlite3FkRequired() - Test to see if FK processing is required. -** sqlite3FkOldmask() - Query for the set of required old.* columns. +** NOT NULL REPLACE The NULL value is replace by the default +** value for that column. If the default value +** is NULL, the action is the same as ABORT. ** +** UNIQUE REPLACE The other row that conflicts with the row +** being inserted is removed. ** -** Externally accessible module functions -** -------------------------------------- +** CHECK REPLACE Illegal. The results in an exception. ** -** sqlite3FkCheck() - Check for foreign key violations. -** sqlite3FkActions() - Code triggers for ON UPDATE/ON DELETE actions. -** sqlite3FkDelete() - Delete an FKey structure. +** Which action to take is determined by the overrideError parameter. +** Or if overrideError==OE_Default, then the pParse->onError parameter +** is used. Or if pParse->onError==OE_Default then the onError value +** for the constraint is used. */ +SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( + Parse *pParse, /* The parser context */ + Table *pTab, /* The table being inserted or updated */ + int *aRegIdx, /* Use register aRegIdx[i] for index i. 0 for unused */ + int iDataCur, /* Canonical data cursor (main table or PK index) */ + int iIdxCur, /* First index cursor */ + int regNewData, /* First register in a range holding values to insert */ + int regOldData, /* Previous content. 0 for INSERTs */ + u8 pkChng, /* Non-zero if the rowid or PRIMARY KEY changed */ + u8 overrideError, /* Override onError to this if not OE_Default */ + int ignoreDest, /* Jump to this label on an OE_Ignore resolution */ + int *pbMayReplace /* OUT: Set to true if constraint may cause a replace */ +){ + Vdbe *v; /* VDBE under constrution */ + Index *pIdx; /* Pointer to one of the indices */ + Index *pPk = 0; /* The PRIMARY KEY index */ + sqlite3 *db; /* Database connection */ + int i; /* loop counter */ + int ix; /* Index loop counter */ + int nCol; /* Number of columns */ + int onError; /* Conflict resolution strategy */ + int j1; /* Address of jump instruction */ + int seenReplace = 0; /* True if REPLACE is used to resolve INT PK conflict */ + int nPkField; /* Number of fields in PRIMARY KEY. 1 for ROWID tables */ + int ipkTop = 0; /* Top of the rowid change constraint check */ + int ipkBottom = 0; /* Bottom of the rowid change constraint check */ + u8 isUpdate; /* True if this is an UPDATE operation */ + u8 bAffinityDone = 0; /* True if the OP_Affinity operation has been run */ + int regRowid = -1; /* Register holding ROWID value */ + + isUpdate = regOldData!=0; + db = pParse->db; + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + assert( pTab->pSelect==0 ); /* This table is not a VIEW */ + nCol = pTab->nCol; + + /* pPk is the PRIMARY KEY index for WITHOUT ROWID tables and NULL for + ** normal rowid tables. nPkField is the number of key fields in the + ** pPk index or 1 for a rowid table. In other words, nPkField is the + ** number of fields in the true primary key of the table. */ + if( HasRowid(pTab) ){ + pPk = 0; + nPkField = 1; + }else{ + pPk = sqlite3PrimaryKeyIndex(pTab); + nPkField = pPk->nKeyCol; + } + + /* Record that this module has started */ + VdbeModuleComment((v, "BEGIN: GenCnstCks(%d,%d,%d,%d,%d)", + iDataCur, iIdxCur, regNewData, regOldData, pkChng)); + + /* Test all NOT NULL constraints. + */ + for(i=0; iiPKey ){ + continue; + } + onError = pTab->aCol[i].notNull; + if( onError==OE_None ) continue; + if( overrideError!=OE_Default ){ + onError = overrideError; + }else if( onError==OE_Default ){ + onError = OE_Abort; + } + if( onError==OE_Replace && pTab->aCol[i].pDflt==0 ){ + onError = OE_Abort; + } + assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail + || onError==OE_Ignore || onError==OE_Replace ); + switch( onError ){ + case OE_Abort: + sqlite3MayAbort(pParse); + /* Fall through */ + case OE_Rollback: + case OE_Fail: { + char *zMsg = sqlite3MPrintf(db, "%s.%s", pTab->zName, + pTab->aCol[i].zName); + sqlite3VdbeAddOp4(v, OP_HaltIfNull, SQLITE_CONSTRAINT_NOTNULL, onError, + regNewData+1+i, zMsg, P4_DYNAMIC); + sqlite3VdbeChangeP5(v, P5_ConstraintNotNull); + VdbeCoverage(v); + break; + } + case OE_Ignore: { + sqlite3VdbeAddOp2(v, OP_IsNull, regNewData+1+i, ignoreDest); + VdbeCoverage(v); + break; + } + default: { + assert( onError==OE_Replace ); + j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regNewData+1+i); VdbeCoverage(v); + sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regNewData+1+i); + sqlite3VdbeJumpHere(v, j1); + break; + } + } + } + + /* Test all CHECK constraints + */ +#ifndef SQLITE_OMIT_CHECK + if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){ + ExprList *pCheck = pTab->pCheck; + pParse->ckBase = regNewData+1; + onError = overrideError!=OE_Default ? overrideError : OE_Abort; + for(i=0; inExpr; i++){ + int allOk = sqlite3VdbeMakeLabel(v); + sqlite3ExprIfTrue(pParse, pCheck->a[i].pExpr, allOk, SQLITE_JUMPIFNULL); + if( onError==OE_Ignore ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); + }else{ + char *zName = pCheck->a[i].zName; + if( zName==0 ) zName = pTab->zName; + if( onError==OE_Replace ) onError = OE_Abort; /* IMP: R-15569-63625 */ + sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_CHECK, + onError, zName, P4_TRANSIENT, + P5_ConstraintCheck); + } + sqlite3VdbeResolveLabel(v, allOk); + } + } +#endif /* !defined(SQLITE_OMIT_CHECK) */ + + /* If rowid is changing, make sure the new rowid does not previously + ** exist in the table. + */ + if( pkChng && pPk==0 ){ + int addrRowidOk = sqlite3VdbeMakeLabel(v); + + /* Figure out what action to take in case of a rowid collision */ + onError = pTab->keyConf; + if( overrideError!=OE_Default ){ + onError = overrideError; + }else if( onError==OE_Default ){ + onError = OE_Abort; + } + + if( isUpdate ){ + /* pkChng!=0 does not mean that the rowid has change, only that + ** it might have changed. Skip the conflict logic below if the rowid + ** is unchanged. */ + sqlite3VdbeAddOp3(v, OP_Eq, regNewData, addrRowidOk, regOldData); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + VdbeCoverage(v); + } + + /* If the response to a rowid conflict is REPLACE but the response + ** to some other UNIQUE constraint is FAIL or IGNORE, then we need + ** to defer the running of the rowid conflict checking until after + ** the UNIQUE constraints have run. + */ + if( onError==OE_Replace && overrideError!=OE_Replace ){ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->onError==OE_Ignore || pIdx->onError==OE_Fail ){ + ipkTop = sqlite3VdbeAddOp0(v, OP_Goto); + break; + } + } + } + + /* Check to see if the new rowid already exists in the table. Skip + ** the following conflict logic if it does not. */ + sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, addrRowidOk, regNewData); + VdbeCoverage(v); + + /* Generate code that deals with a rowid collision */ + switch( onError ){ + default: { + onError = OE_Abort; + /* Fall thru into the next case */ + } + case OE_Rollback: + case OE_Abort: + case OE_Fail: { + sqlite3RowidConstraint(pParse, onError, pTab); + break; + } + case OE_Replace: { + /* If there are DELETE triggers on this table and the + ** recursive-triggers flag is set, call GenerateRowDelete() to + ** remove the conflicting row from the table. This will fire + ** the triggers and remove both the table and index b-tree entries. + ** + ** Otherwise, if there are no triggers or the recursive-triggers + ** flag is not set, but the table has one or more indexes, call + ** GenerateRowIndexDelete(). This removes the index b-tree entries + ** only. The table b-tree entry will be replaced by the new entry + ** when it is inserted. + ** + ** If either GenerateRowDelete() or GenerateRowIndexDelete() is called, + ** also invoke MultiWrite() to indicate that this VDBE may require + ** statement rollback (if the statement is aborted after the delete + ** takes place). Earlier versions called sqlite3MultiWrite() regardless, + ** but being more selective here allows statements like: + ** + ** REPLACE INTO t(rowid) VALUES($newrowid) + ** + ** to run without a statement journal if there are no indexes on the + ** table. + */ + Trigger *pTrigger = 0; + if( db->flags&SQLITE_RecTriggers ){ + pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); + } + if( pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0) ){ + sqlite3MultiWrite(pParse); + sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur, + regNewData, 1, 0, OE_Replace, 1); + }else if( pTab->pIndex ){ + sqlite3MultiWrite(pParse); + sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, 0); + } + seenReplace = 1; + break; + } + case OE_Ignore: { + /*assert( seenReplace==0 );*/ + sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); + break; + } + } + sqlite3VdbeResolveLabel(v, addrRowidOk); + if( ipkTop ){ + ipkBottom = sqlite3VdbeAddOp0(v, OP_Goto); + sqlite3VdbeJumpHere(v, ipkTop); + } + } + + /* Test all UNIQUE constraints by creating entries for each UNIQUE + ** index and making sure that duplicate entries do not already exist. + ** Compute the revised record entries for indices as we go. + ** + ** This loop also handles the case of the PRIMARY KEY index for a + ** WITHOUT ROWID table. + */ + for(ix=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, ix++){ + int regIdx; /* Range of registers hold conent for pIdx */ + int regR; /* Range of registers holding conflicting PK */ + int iThisCur; /* Cursor for this UNIQUE index */ + int addrUniqueOk; /* Jump here if the UNIQUE constraint is satisfied */ + + if( aRegIdx[ix]==0 ) continue; /* Skip indices that do not change */ + if( bAffinityDone==0 ){ + sqlite3TableAffinity(v, pTab, regNewData+1); + bAffinityDone = 1; + } + iThisCur = iIdxCur+ix; + addrUniqueOk = sqlite3VdbeMakeLabel(v); + + /* Skip partial indices for which the WHERE clause is not true */ + if( pIdx->pPartIdxWhere ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, aRegIdx[ix]); + pParse->ckBase = regNewData+1; + sqlite3ExprIfFalse(pParse, pIdx->pPartIdxWhere, addrUniqueOk, + SQLITE_JUMPIFNULL); + pParse->ckBase = 0; + } + + /* Create a record for this index entry as it should appear after + ** the insert or update. Store that record in the aRegIdx[ix] register + */ + regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn); + for(i=0; inColumn; i++){ + int iField = pIdx->aiColumn[i]; + int x; + if( iField<0 || iField==pTab->iPKey ){ + if( regRowid==regIdx+i ) continue; /* ROWID already in regIdx+i */ + x = regNewData; + regRowid = pIdx->pPartIdxWhere ? -1 : regIdx+i; + }else{ + x = iField + regNewData + 1; + } + sqlite3VdbeAddOp2(v, OP_SCopy, x, regIdx+i); + VdbeComment((v, "%s", iField<0 ? "rowid" : pTab->aCol[iField].zName)); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn, aRegIdx[ix]); + VdbeComment((v, "for %s", pIdx->zName)); + sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn); + + /* In an UPDATE operation, if this index is the PRIMARY KEY index + ** of a WITHOUT ROWID table and there has been no change the + ** primary key, then no collision is possible. The collision detection + ** logic below can all be skipped. */ + if( isUpdate && pPk==pIdx && pkChng==0 ){ + sqlite3VdbeResolveLabel(v, addrUniqueOk); + continue; + } + + /* Find out what action to take in case there is a uniqueness conflict */ + onError = pIdx->onError; + if( onError==OE_None ){ + sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn); + sqlite3VdbeResolveLabel(v, addrUniqueOk); + continue; /* pIdx is not a UNIQUE index */ + } + if( overrideError!=OE_Default ){ + onError = overrideError; + }else if( onError==OE_Default ){ + onError = OE_Abort; + } + + /* Check to see if the new index entry will be unique */ + sqlite3VdbeAddOp4Int(v, OP_NoConflict, iThisCur, addrUniqueOk, + regIdx, pIdx->nKeyCol); VdbeCoverage(v); + + /* Generate code to handle collisions */ + regR = (pIdx==pPk) ? regIdx : sqlite3GetTempRange(pParse, nPkField); + if( isUpdate || onError==OE_Replace ){ + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp2(v, OP_IdxRowid, iThisCur, regR); + /* Conflict only if the rowid of the existing index entry + ** is different from old-rowid */ + if( isUpdate ){ + sqlite3VdbeAddOp3(v, OP_Eq, regR, addrUniqueOk, regOldData); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + VdbeCoverage(v); + } + }else{ + int x; + /* Extract the PRIMARY KEY from the end of the index entry and + ** store it in registers regR..regR+nPk-1 */ + if( pIdx!=pPk ){ + for(i=0; inKeyCol; i++){ + x = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[i]); + sqlite3VdbeAddOp3(v, OP_Column, iThisCur, x, regR+i); + VdbeComment((v, "%s.%s", pTab->zName, + pTab->aCol[pPk->aiColumn[i]].zName)); + } + } + if( isUpdate ){ + /* If currently processing the PRIMARY KEY of a WITHOUT ROWID + ** table, only conflict if the new PRIMARY KEY values are actually + ** different from the old. + ** + ** For a UNIQUE index, only conflict if the PRIMARY KEY values + ** of the matched index row are different from the original PRIMARY + ** KEY values of this row before the update. */ + int addrJump = sqlite3VdbeCurrentAddr(v)+pPk->nKeyCol; + int op = OP_Ne; + int regCmp = (IsPrimaryKeyIndex(pIdx) ? regIdx : regR); + + for(i=0; inKeyCol; i++){ + char *p4 = (char*)sqlite3LocateCollSeq(pParse, pPk->azColl[i]); + x = pPk->aiColumn[i]; + if( i==(pPk->nKeyCol-1) ){ + addrJump = addrUniqueOk; + op = OP_Eq; + } + sqlite3VdbeAddOp4(v, op, + regOldData+1+x, addrJump, regCmp+i, p4, P4_COLLSEQ + ); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + VdbeCoverageIf(v, op==OP_Eq); + VdbeCoverageIf(v, op==OP_Ne); + } + } + } + } + + /* Generate code that executes if the new index entry is not unique */ + assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail + || onError==OE_Ignore || onError==OE_Replace ); + switch( onError ){ + case OE_Rollback: + case OE_Abort: + case OE_Fail: { + sqlite3UniqueConstraint(pParse, onError, pIdx); + break; + } + case OE_Ignore: { + sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); + break; + } + default: { + Trigger *pTrigger = 0; + assert( onError==OE_Replace ); + sqlite3MultiWrite(pParse); + if( db->flags&SQLITE_RecTriggers ){ + pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); + } + sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur, + regR, nPkField, 0, OE_Replace, pIdx==pPk); + seenReplace = 1; + break; + } + } + sqlite3VdbeResolveLabel(v, addrUniqueOk); + sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn); + if( regR!=regIdx ) sqlite3ReleaseTempRange(pParse, regR, nPkField); + } + if( ipkTop ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, ipkTop+1); + sqlite3VdbeJumpHere(v, ipkBottom); + } + + *pbMayReplace = seenReplace; + VdbeModuleComment((v, "END: GenCnstCks(%d)", seenReplace)); +} /* -** VDBE Calling Convention -** ----------------------- -** -** Example: -** -** For the following INSERT statement: -** -** CREATE TABLE t1(a, b INTEGER PRIMARY KEY, c); -** INSERT INTO t1 VALUES(1, 2, 3.1); +** This routine generates code to finish the INSERT or UPDATE operation +** that was started by a prior call to sqlite3GenerateConstraintChecks. +** A consecutive range of registers starting at regNewData contains the +** rowid and the content to be inserted. ** -** Register (x): 2 (type integer) -** Register (x+1): 1 (type integer) -** Register (x+2): NULL (type NULL) -** Register (x+3): 3.1 (type real) +** The arguments to this routine should be the same as the first six +** arguments to sqlite3GenerateConstraintChecks. */ +SQLITE_PRIVATE void sqlite3CompleteInsertion( + Parse *pParse, /* The parser context */ + Table *pTab, /* the table into which we are inserting */ + int iDataCur, /* Cursor of the canonical data source */ + int iIdxCur, /* First index cursor */ + int regNewData, /* Range of content */ + int *aRegIdx, /* Register used by each index. 0 for unused indices */ + int isUpdate, /* True for UPDATE, False for INSERT */ + int appendBias, /* True if this is likely to be an append */ + int useSeekResult /* True to set the USESEEKRESULT flag on OP_[Idx]Insert */ +){ + Vdbe *v; /* Prepared statements under construction */ + Index *pIdx; /* An index being inserted or updated */ + u8 pik_flags; /* flag values passed to the btree insert */ + int regData; /* Content registers (after the rowid) */ + int regRec; /* Register holding assembled record for the table */ + int i; /* Loop counter */ + u8 bAffinityDone = 0; /* True if OP_Affinity has been run already */ + + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + assert( pTab->pSelect==0 ); /* This table is not a VIEW */ + for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ + if( aRegIdx[i]==0 ) continue; + bAffinityDone = 1; + if( pIdx->pPartIdxWhere ){ + sqlite3VdbeAddOp2(v, OP_IsNull, aRegIdx[i], sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + } + sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i]); + pik_flags = 0; + if( useSeekResult ) pik_flags = OPFLAG_USESEEKRESULT; + if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){ + assert( pParse->nested==0 ); + pik_flags |= OPFLAG_NCHANGE; + } + if( pik_flags ) sqlite3VdbeChangeP5(v, pik_flags); + } + if( !HasRowid(pTab) ) return; + regData = regNewData + 1; + regRec = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regData, pTab->nCol, regRec); + if( !bAffinityDone ) sqlite3TableAffinity(v, pTab, 0); + sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol); + if( pParse->nested ){ + pik_flags = 0; + }else{ + pik_flags = OPFLAG_NCHANGE; + pik_flags |= (isUpdate?OPFLAG_ISUPDATE:OPFLAG_LASTROWID); + } + if( appendBias ){ + pik_flags |= OPFLAG_APPEND; + } + if( useSeekResult ){ + pik_flags |= OPFLAG_USESEEKRESULT; + } + sqlite3VdbeAddOp3(v, OP_Insert, iDataCur, regRec, regNewData); + if( !pParse->nested ){ + sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT); + } + sqlite3VdbeChangeP5(v, pik_flags); +} /* -** A foreign key constraint requires that the key columns in the parent -** table are collectively subject to a UNIQUE or PRIMARY KEY constraint. -** Given that pParent is the parent table for foreign key constraint pFKey, -** search the schema a unique index on the parent key columns. -** -** If successful, zero is returned. If the parent key is an INTEGER PRIMARY -** KEY column, then output variable *ppIdx is set to NULL. Otherwise, *ppIdx -** is set to point to the unique index. -** -** If the parent key consists of a single column (the foreign key constraint -** is not a composite foreign key), output variable *paiCol is set to NULL. -** Otherwise, it is set to point to an allocated array of size N, where -** N is the number of columns in the parent key. The first element of the -** array is the index of the child table column that is mapped by the FK -** constraint to the parent table column stored in the left-most column -** of index *ppIdx. The second element of the array is the index of the -** child table column that corresponds to the second left-most column of -** *ppIdx, and so on. -** -** If the required index cannot be found, either because: -** -** 1) The named parent key columns do not exist, or +** Allocate cursors for the pTab table and all its indices and generate +** code to open and initialized those cursors. ** -** 2) The named parent key columns do exist, but are not subject to a -** UNIQUE or PRIMARY KEY constraint, or +** The cursor for the object that contains the complete data (normally +** the table itself, but the PRIMARY KEY index in the case of a WITHOUT +** ROWID table) is returned in *piDataCur. The first index cursor is +** returned in *piIdxCur. The number of indices is returned. ** -** 3) No parent key columns were provided explicitly as part of the -** foreign key definition, and the parent table does not have a -** PRIMARY KEY, or +** Use iBase as the first cursor (either the *piDataCur for rowid tables +** or the first index for WITHOUT ROWID tables) if it is non-negative. +** If iBase is negative, then allocate the next available cursor. ** -** 4) No parent key columns were provided explicitly as part of the -** foreign key definition, and the PRIMARY KEY of the parent table -** consists of a a different number of columns to the child key in -** the child table. +** For a rowid table, *piDataCur will be exactly one less than *piIdxCur. +** For a WITHOUT ROWID table, *piDataCur will be somewhere in the range +** of *piIdxCurs, depending on where the PRIMARY KEY index appears on the +** pTab->pIndex list. ** -** then non-zero is returned, and a "foreign key mismatch" error loaded -** into pParse. If an OOM error occurs, non-zero is returned and the -** pParse->db->mallocFailed flag is set. +** If pTab is a virtual table, then this routine is a no-op and the +** *piDataCur and *piIdxCur values are left uninitialized. */ -static int locateFkeyIndex( - Parse *pParse, /* Parse context to store any error in */ - Table *pParent, /* Parent table of FK constraint pFKey */ - FKey *pFKey, /* Foreign key to find index for */ - Index **ppIdx, /* OUT: Unique index on parent table */ - int **paiCol /* OUT: Map of index columns in pFKey */ +SQLITE_PRIVATE int sqlite3OpenTableAndIndices( + Parse *pParse, /* Parsing context */ + Table *pTab, /* Table to be opened */ + int op, /* OP_OpenRead or OP_OpenWrite */ + int iBase, /* Use this for the table cursor, if there is one */ + u8 *aToOpen, /* If not NULL: boolean for each table and index */ + int *piDataCur, /* Write the database source cursor number here */ + int *piIdxCur /* Write the first index cursor number here */ ){ - Index *pIdx = 0; /* Value to return via *ppIdx */ - int *aiCol = 0; /* Value to return via *paiCol */ - int nCol = pFKey->nCol; /* Number of columns in parent key */ - char *zKey = pFKey->aCol[0].zCol; /* Name of left-most parent key column */ - - /* The caller is responsible for zeroing output parameters. */ - assert( ppIdx && *ppIdx==0 ); - assert( !paiCol || *paiCol==0 ); - assert( pParse ); + int i; + int iDb; + int iDataCur; + Index *pIdx; + Vdbe *v; - /* If this is a non-composite (single column) foreign key, check if it - ** maps to the INTEGER PRIMARY KEY of table pParent. If so, leave *ppIdx - ** and *paiCol set to zero and return early. - ** - ** Otherwise, for a composite foreign key (more than one column), allocate - ** space for the aiCol array (returned via output parameter *paiCol). - ** Non-composite foreign keys do not require the aiCol array. - */ - if( nCol==1 ){ - /* The FK maps to the IPK if any of the following are true: - ** - ** 1) There is an INTEGER PRIMARY KEY column and the FK is implicitly - ** mapped to the primary key of table pParent, or - ** 2) The FK is explicitly mapped to a column declared as INTEGER - ** PRIMARY KEY. - */ - if( pParent->iPKey>=0 ){ - if( !zKey ) return 0; - if( !sqlite3StrICmp(pParent->aCol[pParent->iPKey].zName, zKey) ) return 0; + assert( op==OP_OpenRead || op==OP_OpenWrite ); + if( IsVirtual(pTab) ){ + /* This routine is a no-op for virtual tables. Leave the output + ** variables *piDataCur and *piIdxCur uninitialized so that valgrind + ** can detect if they are used by mistake in the caller. */ + return 0; + } + iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + if( iBase<0 ) iBase = pParse->nTab; + iDataCur = iBase++; + if( piDataCur ) *piDataCur = iDataCur; + if( HasRowid(pTab) && (aToOpen==0 || aToOpen[0]) ){ + sqlite3OpenTable(pParse, iDataCur, iDb, pTab, op); + }else{ + sqlite3TableLock(pParse, iDb, pTab->tnum, op==OP_OpenWrite, pTab->zName); + } + if( piIdxCur ) *piIdxCur = iBase; + for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ + int iIdxCur = iBase++; + assert( pIdx->pSchema==pTab->pSchema ); + if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) && piDataCur ){ + *piDataCur = iIdxCur; + } + if( aToOpen==0 || aToOpen[i+1] ){ + sqlite3VdbeAddOp3(v, op, iIdxCur, pIdx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); + VdbeComment((v, "%s", pIdx->zName)); } - }else if( paiCol ){ - assert( nCol>1 ); - aiCol = (int *)sqlite3DbMallocRaw(pParse->db, nCol*sizeof(int)); - if( !aiCol ) return 1; - *paiCol = aiCol; } + if( iBase>pParse->nTab ) pParse->nTab = iBase; + return i; +} - for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->nColumn==nCol && pIdx->onError!=OE_None ){ - /* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number - ** of columns. If each indexed column corresponds to a foreign key - ** column of pFKey, then this index is a winner. */ - if( zKey==0 ){ - /* If zKey is NULL, then this foreign key is implicitly mapped to - ** the PRIMARY KEY of table pParent. The PRIMARY KEY index may be - ** identified by the test (Index.autoIndex==2). */ - if( pIdx->autoIndex==2 ){ - if( aiCol ){ - int i; - for(i=0; iaCol[i].iFrom; - } - break; - } - }else{ - /* If zKey is non-NULL, then this foreign key was declared to - ** map to an explicit list of columns in table pParent. Check if this - ** index matches those columns. Also, check that the index uses - ** the default collation sequences for each column. */ - int i, j; - for(i=0; iaiColumn[i]; /* Index of column in parent tbl */ - char *zDfltColl; /* Def. collation for column */ - char *zIdxCol; /* Name of indexed column */ +#ifdef SQLITE_TEST +/* +** The following global variable is incremented whenever the +** transfer optimization is used. This is used for testing +** purposes only - to make sure the transfer optimization really +** is happening when it is supposed to. +*/ +SQLITE_API int sqlite3_xferopt_count; +#endif /* SQLITE_TEST */ - /* If the index uses a collation sequence that is different from - ** the default collation sequence for the column, this index is - ** unusable. Bail out early in this case. */ - zDfltColl = pParent->aCol[iCol].zColl; - if( !zDfltColl ){ - zDfltColl = "BINARY"; - } - if( sqlite3StrICmp(pIdx->azColl[i], zDfltColl) ) break; - zIdxCol = pParent->aCol[iCol].zName; - for(j=0; jaCol[j].zCol, zIdxCol)==0 ){ - if( aiCol ) aiCol[i] = pFKey->aCol[j].iFrom; - break; - } - } - if( j==nCol ) break; - } - if( i==nCol ) break; /* pIdx is usable */ - } - } +#ifndef SQLITE_OMIT_XFER_OPT +/* +** Check to collation names to see if they are compatible. +*/ +static int xferCompatibleCollation(const char *z1, const char *z2){ + if( z1==0 ){ + return z2==0; + } + if( z2==0 ){ + return 0; } + return sqlite3StrICmp(z1, z2)==0; +} - if( !pIdx ){ - if( !pParse->disableTriggers ){ - sqlite3ErrorMsg(pParse, "foreign key mismatch"); + +/* +** Check to see if index pSrc is compatible as a source of data +** for index pDest in an insert transfer optimization. The rules +** for a compatible index: +** +** * The index is over the same set of columns +** * The same DESC and ASC markings occurs on all columns +** * The same onError processing (OE_Abort, OE_Ignore, etc) +** * The same collating sequence on each column +** * The index has the exact same WHERE clause +*/ +static int xferCompatibleIndex(Index *pDest, Index *pSrc){ + int i; + assert( pDest && pSrc ); + assert( pDest->pTable!=pSrc->pTable ); + if( pDest->nKeyCol!=pSrc->nKeyCol ){ + return 0; /* Different number of columns */ + } + if( pDest->onError!=pSrc->onError ){ + return 0; /* Different conflict resolution strategies */ + } + for(i=0; inKeyCol; i++){ + if( pSrc->aiColumn[i]!=pDest->aiColumn[i] ){ + return 0; /* Different columns indexed */ + } + if( pSrc->aSortOrder[i]!=pDest->aSortOrder[i] ){ + return 0; /* Different sort orders */ + } + if( !xferCompatibleCollation(pSrc->azColl[i],pDest->azColl[i]) ){ + return 0; /* Different collating sequences */ } - sqlite3DbFree(pParse->db, aiCol); - return 1; + } + if( sqlite3ExprCompare(pSrc->pPartIdxWhere, pDest->pPartIdxWhere, -1) ){ + return 0; /* Different WHERE clauses */ } - *ppIdx = pIdx; - return 0; + /* If no test above fails then the indices must be compatible */ + return 1; } /* -** This function is called when a row is inserted into or deleted from the -** child table of foreign key constraint pFKey. If an SQL UPDATE is executed -** on the child table of pFKey, this function is invoked twice for each row -** affected - once to "delete" the old row, and then again to "insert" the -** new row. -** -** Each time it is called, this function generates VDBE code to locate the -** row in the parent table that corresponds to the row being inserted into -** or deleted from the child table. If the parent row can be found, no -** special action is taken. Otherwise, if the parent row can *not* be -** found in the parent table: +** Attempt the transfer optimization on INSERTs of the form ** -** Operation | FK type | Action taken -** -------------------------------------------------------------------------- -** INSERT immediate Increment the "immediate constraint counter". +** INSERT INTO tab1 SELECT * FROM tab2; ** -** DELETE immediate Decrement the "immediate constraint counter". +** The xfer optimization transfers raw records from tab2 over to tab1. +** Columns are not decoded and reassembled, which greatly improves +** performance. Raw index records are transferred in the same way. ** -** INSERT deferred Increment the "deferred constraint counter". +** The xfer optimization is only attempted if tab1 and tab2 are compatible. +** There are lots of rules for determining compatibility - see comments +** embedded in the code for details. ** -** DELETE deferred Decrement the "deferred constraint counter". +** This routine returns TRUE if the optimization is guaranteed to be used. +** Sometimes the xfer optimization will only work if the destination table +** is empty - a factor that can only be determined at run-time. In that +** case, this routine generates code for the xfer optimization but also +** does a test to see if the destination table is empty and jumps over the +** xfer optimization code if the test fails. In that case, this routine +** returns FALSE so that the caller will know to go ahead and generate +** an unoptimized transfer. This routine also returns FALSE if there +** is no chance that the xfer optimization can be applied. ** -** These operations are identified in the comment at the top of this file -** (fkey.c) as "I.1" and "D.1". +** This optimization is particularly useful at making VACUUM run faster. */ -static void fkLookupParent( - Parse *pParse, /* Parse context */ - int iDb, /* Index of database housing pTab */ - Table *pTab, /* Parent table of FK pFKey */ - Index *pIdx, /* Unique index on parent key columns in pTab */ - FKey *pFKey, /* Foreign key constraint */ - int *aiCol, /* Map from parent key columns to child table columns */ - int regData, /* Address of array containing child table row */ - int nIncr, /* Increment constraint counter by this */ - int isIgnore /* If true, pretend pTab contains all NULL values */ +static int xferOptimization( + Parse *pParse, /* Parser context */ + Table *pDest, /* The table we are inserting into */ + Select *pSelect, /* A SELECT statement to use as the data source */ + int onError, /* How to handle constraint errors */ + int iDbDest /* The database of pDest */ ){ - int i; /* Iterator variable */ - Vdbe *v = sqlite3GetVdbe(pParse); /* Vdbe to add code to */ - int iCur = pParse->nTab - 1; /* Cursor number to use */ - int iOk = sqlite3VdbeMakeLabel(v); /* jump here if parent key found */ + ExprList *pEList; /* The result set of the SELECT */ + Table *pSrc; /* The table in the FROM clause of SELECT */ + Index *pSrcIdx, *pDestIdx; /* Source and destination indices */ + struct SrcList_item *pItem; /* An element of pSelect->pSrc */ + int i; /* Loop counter */ + int iDbSrc; /* The database of pSrc */ + int iSrc, iDest; /* Cursors from source and destination */ + int addr1, addr2; /* Loop addresses */ + int emptyDestTest = 0; /* Address of test for empty pDest */ + int emptySrcTest = 0; /* Address of test for empty pSrc */ + Vdbe *v; /* The VDBE we are building */ + int regAutoinc; /* Memory register used by AUTOINC */ + int destHasUniqueIdx = 0; /* True if pDest has a UNIQUE index */ + int regData, regRowid; /* Registers holding data and rowid */ - /* If nIncr is less than zero, then check at runtime if there are any - ** outstanding constraints to resolve. If there are not, there is no need - ** to check if deleting this row resolves any outstanding violations. - ** - ** Check if any of the key columns in the child table row are NULL. If - ** any are, then the constraint is considered satisfied. No need to - ** search for a matching row in the parent table. */ - if( nIncr<0 ){ - sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, iOk); + if( pSelect==0 ){ + return 0; /* Must be of the form INSERT INTO ... SELECT ... */ + } + if( pParse->pWith || pSelect->pWith ){ + /* Do not attempt to process this query if there are an WITH clauses + ** attached to it. Proceeding may generate a false "no such table: xxx" + ** error if pSelect reads from a CTE named "xxx". */ + return 0; + } + if( sqlite3TriggerList(pParse, pDest) ){ + return 0; /* tab1 must not have triggers */ + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pDest->tabFlags & TF_Virtual ){ + return 0; /* tab1 must not be a virtual table */ + } +#endif + if( onError==OE_Default ){ + if( pDest->iPKey>=0 ) onError = pDest->keyConf; + if( onError==OE_Default ) onError = OE_Abort; + } + assert(pSelect->pSrc); /* allocated even if there is no FROM clause */ + if( pSelect->pSrc->nSrc!=1 ){ + return 0; /* FROM clause must have exactly one term */ + } + if( pSelect->pSrc->a[0].pSelect ){ + return 0; /* FROM clause cannot contain a subquery */ + } + if( pSelect->pWhere ){ + return 0; /* SELECT may not have a WHERE clause */ + } + if( pSelect->pOrderBy ){ + return 0; /* SELECT may not have an ORDER BY clause */ + } + /* Do not need to test for a HAVING clause. If HAVING is present but + ** there is no ORDER BY, we will get an error. */ + if( pSelect->pGroupBy ){ + return 0; /* SELECT may not have a GROUP BY clause */ + } + if( pSelect->pLimit ){ + return 0; /* SELECT may not have a LIMIT clause */ + } + assert( pSelect->pOffset==0 ); /* Must be so if pLimit==0 */ + if( pSelect->pPrior ){ + return 0; /* SELECT may not be a compound query */ + } + if( pSelect->selFlags & SF_Distinct ){ + return 0; /* SELECT may not be DISTINCT */ + } + pEList = pSelect->pEList; + assert( pEList!=0 ); + if( pEList->nExpr!=1 ){ + return 0; /* The result set must have exactly one column */ + } + assert( pEList->a[0].pExpr ); + if( pEList->a[0].pExpr->op!=TK_ALL ){ + return 0; /* The result set must be the special operator "*" */ + } + + /* At this point we have established that the statement is of the + ** correct syntactic form to participate in this optimization. Now + ** we have to check the semantics. + */ + pItem = pSelect->pSrc->a; + pSrc = sqlite3LocateTableItem(pParse, 0, pItem); + if( pSrc==0 ){ + return 0; /* FROM clause does not contain a real table */ + } + if( pSrc==pDest ){ + return 0; /* tab1 and tab2 may not be the same table */ + } + if( HasRowid(pDest)!=HasRowid(pSrc) ){ + return 0; /* source and destination must both be WITHOUT ROWID or not */ + } +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pSrc->tabFlags & TF_Virtual ){ + return 0; /* tab2 must not be a virtual table */ + } +#endif + if( pSrc->pSelect ){ + return 0; /* tab2 may not be a view */ + } + if( pDest->nCol!=pSrc->nCol ){ + return 0; /* Number of columns must be the same in tab1 and tab2 */ + } + if( pDest->iPKey!=pSrc->iPKey ){ + return 0; /* Both tables must have the same INTEGER PRIMARY KEY */ + } + for(i=0; inCol; i++){ + Column *pDestCol = &pDest->aCol[i]; + Column *pSrcCol = &pSrc->aCol[i]; + if( pDestCol->affinity!=pSrcCol->affinity ){ + return 0; /* Affinity must be the same on all columns */ + } + if( !xferCompatibleCollation(pDestCol->zColl, pSrcCol->zColl) ){ + return 0; /* Collating sequence must be the same on all columns */ + } + if( pDestCol->notNull && !pSrcCol->notNull ){ + return 0; /* tab2 must be NOT NULL if tab1 is */ + } + /* Default values for second and subsequent columns need to match. */ + if( i>0 + && ((pDestCol->zDflt==0)!=(pSrcCol->zDflt==0) + || (pDestCol->zDflt && strcmp(pDestCol->zDflt, pSrcCol->zDflt)!=0)) + ){ + return 0; /* Default values must be the same for all columns */ + } + } + for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){ + if( IsUniqueIndex(pDestIdx) ){ + destHasUniqueIdx = 1; + } + for(pSrcIdx=pSrc->pIndex; pSrcIdx; pSrcIdx=pSrcIdx->pNext){ + if( xferCompatibleIndex(pDestIdx, pSrcIdx) ) break; + } + if( pSrcIdx==0 ){ + return 0; /* pDestIdx has no corresponding index in pSrc */ + } + } +#ifndef SQLITE_OMIT_CHECK + if( pDest->pCheck && sqlite3ExprListCompare(pSrc->pCheck,pDest->pCheck,-1) ){ + return 0; /* Tables have different CHECK constraints. Ticket #2252 */ + } +#endif +#ifndef SQLITE_OMIT_FOREIGN_KEY + /* Disallow the transfer optimization if the destination table constains + ** any foreign key constraints. This is more restrictive than necessary. + ** But the main beneficiary of the transfer optimization is the VACUUM + ** command, and the VACUUM command disables foreign key constraints. So + ** the extra complication to make this rule less restrictive is probably + ** not worth the effort. Ticket [6284df89debdfa61db8073e062908af0c9b6118e] + */ + if( (pParse->db->flags & SQLITE_ForeignKeys)!=0 && pDest->pFKey!=0 ){ + return 0; } - for(i=0; inCol; i++){ - int iReg = aiCol[i] + regData + 1; - sqlite3VdbeAddOp2(v, OP_IsNull, iReg, iOk); +#endif + if( (pParse->db->flags & SQLITE_CountRows)!=0 ){ + return 0; /* xfer opt does not play well with PRAGMA count_changes */ } - if( isIgnore==0 ){ - if( pIdx==0 ){ - /* If pIdx is NULL, then the parent key is the INTEGER PRIMARY KEY - ** column of the parent table (table pTab). */ - int iMustBeInt; /* Address of MustBeInt instruction */ - int regTemp = sqlite3GetTempReg(pParse); - - /* Invoke MustBeInt to coerce the child key value to an integer (i.e. - ** apply the affinity of the parent key). If this fails, then there - ** is no matching parent key. Before using MustBeInt, make a copy of - ** the value. Otherwise, the value inserted into the child key column - ** will have INTEGER affinity applied to it, which may not be correct. */ - sqlite3VdbeAddOp2(v, OP_SCopy, aiCol[0]+1+regData, regTemp); - iMustBeInt = sqlite3VdbeAddOp2(v, OP_MustBeInt, regTemp, 0); - - /* If the parent table is the same as the child table, and we are about - ** to increment the constraint-counter (i.e. this is an INSERT operation), - ** then check if the row being inserted matches itself. If so, do not - ** increment the constraint-counter. */ - if( pTab==pFKey->pFrom && nIncr==1 ){ - sqlite3VdbeAddOp3(v, OP_Eq, regData, iOk, regTemp); - } - - sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenRead); - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regTemp); - sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk); - sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); - sqlite3VdbeJumpHere(v, iMustBeInt); - sqlite3ReleaseTempReg(pParse, regTemp); + /* If we get this far, it means that the xfer optimization is at + ** least a possibility, though it might only work if the destination + ** table (tab1) is initially empty. + */ +#ifdef SQLITE_TEST + sqlite3_xferopt_count++; +#endif + iDbSrc = sqlite3SchemaToIndex(pParse->db, pSrc->pSchema); + v = sqlite3GetVdbe(pParse); + sqlite3CodeVerifySchema(pParse, iDbSrc); + iSrc = pParse->nTab++; + iDest = pParse->nTab++; + regAutoinc = autoIncBegin(pParse, iDbDest, pDest); + regData = sqlite3GetTempReg(pParse); + regRowid = sqlite3GetTempReg(pParse); + sqlite3OpenTable(pParse, iDest, iDbDest, pDest, OP_OpenWrite); + assert( HasRowid(pDest) || destHasUniqueIdx ); + if( (pDest->iPKey<0 && pDest->pIndex!=0) /* (1) */ + || destHasUniqueIdx /* (2) */ + || (onError!=OE_Abort && onError!=OE_Rollback) /* (3) */ + ){ + /* In some circumstances, we are able to run the xfer optimization + ** only if the destination table is initially empty. This code makes + ** that determination. Conditions under which the destination must + ** be empty: + ** + ** (1) There is no INTEGER PRIMARY KEY but there are indices. + ** (If the destination is not initially empty, the rowid fields + ** of index entries might need to change.) + ** + ** (2) The destination has a unique index. (The xfer optimization + ** is unable to test uniqueness.) + ** + ** (3) onError is something other than OE_Abort and OE_Rollback. + */ + addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iDest, 0); VdbeCoverage(v); + emptyDestTest = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0); + sqlite3VdbeJumpHere(v, addr1); + } + if( HasRowid(pSrc) ){ + sqlite3OpenTable(pParse, iSrc, iDbSrc, pSrc, OP_OpenRead); + emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); + if( pDest->iPKey>=0 ){ + addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); + addr2 = sqlite3VdbeAddOp3(v, OP_NotExists, iDest, 0, regRowid); + VdbeCoverage(v); + sqlite3RowidConstraint(pParse, onError, pDest); + sqlite3VdbeJumpHere(v, addr2); + autoIncStep(pParse, regAutoinc, regRowid); + }else if( pDest->pIndex==0 ){ + addr1 = sqlite3VdbeAddOp2(v, OP_NewRowid, iDest, regRowid); }else{ - int nCol = pFKey->nCol; - int regTemp = sqlite3GetTempRange(pParse, nCol); - int regRec = sqlite3GetTempReg(pParse); - KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx); - - sqlite3VdbeAddOp3(v, OP_OpenRead, iCur, pIdx->tnum, iDb); - sqlite3VdbeChangeP4(v, -1, (char*)pKey, P4_KEYINFO_HANDOFF); - for(i=0; ipFrom && nIncr==1 ){ - int iJump = sqlite3VdbeCurrentAddr(v) + nCol + 1; - for(i=0; iaiColumn[i]+1+regData; - assert( aiCol[i]!=pTab->iPKey ); - if( pIdx->aiColumn[i]==pTab->iPKey ){ - /* The parent key is a composite key that includes the IPK column */ - iParent = regData; - } - sqlite3VdbeAddOp3(v, OP_Ne, iChild, iJump, iParent); - sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL); - } - sqlite3VdbeAddOp2(v, OP_Goto, 0, iOk); - } - - sqlite3VdbeAddOp3(v, OP_MakeRecord, regTemp, nCol, regRec); - sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v,pIdx), P4_TRANSIENT); - sqlite3VdbeAddOp4Int(v, OP_Found, iCur, iOk, regRec, 0); - - sqlite3ReleaseTempReg(pParse, regRec); - sqlite3ReleaseTempRange(pParse, regTemp, nCol); + addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); + assert( (pDest->tabFlags & TF_Autoincrement)==0 ); + } + sqlite3VdbeAddOp2(v, OP_RowData, iSrc, regData); + sqlite3VdbeAddOp3(v, OP_Insert, iDest, regData, regRowid); + sqlite3VdbeChangeP5(v, OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND); + sqlite3VdbeChangeP4(v, -1, pDest->zName, 0); + sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); + sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); + }else{ + sqlite3TableLock(pParse, iDbDest, pDest->tnum, 1, pDest->zName); + sqlite3TableLock(pParse, iDbSrc, pSrc->tnum, 0, pSrc->zName); + } + for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){ + for(pSrcIdx=pSrc->pIndex; ALWAYS(pSrcIdx); pSrcIdx=pSrcIdx->pNext){ + if( xferCompatibleIndex(pDestIdx, pSrcIdx) ) break; } + assert( pSrcIdx ); + sqlite3VdbeAddOp3(v, OP_OpenRead, iSrc, pSrcIdx->tnum, iDbSrc); + sqlite3VdbeSetP4KeyInfo(pParse, pSrcIdx); + VdbeComment((v, "%s", pSrcIdx->zName)); + sqlite3VdbeAddOp3(v, OP_OpenWrite, iDest, pDestIdx->tnum, iDbDest); + sqlite3VdbeSetP4KeyInfo(pParse, pDestIdx); + sqlite3VdbeChangeP5(v, OPFLAG_BULKCSR); + VdbeComment((v, "%s", pDestIdx->zName)); + addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_RowKey, iSrc, regData); + sqlite3VdbeAddOp3(v, OP_IdxInsert, iDest, regData, 1); + sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1+1); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr1); + sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); + sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); } - - if( !pFKey->isDeferred && !pParse->pToplevel && !pParse->isMultiWrite ){ - /* Special case: If this is an INSERT statement that will insert exactly - ** one row into the table, raise a constraint immediately instead of - ** incrementing a counter. This is necessary as the VM code is being - ** generated for will not open a statement transaction. */ - assert( nIncr==1 ); - sqlite3HaltConstraint( - pParse, OE_Abort, "foreign key constraint failed", P4_STATIC - ); + if( emptySrcTest ) sqlite3VdbeJumpHere(v, emptySrcTest); + sqlite3ReleaseTempReg(pParse, regRowid); + sqlite3ReleaseTempReg(pParse, regData); + if( emptyDestTest ){ + sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_OK, 0); + sqlite3VdbeJumpHere(v, emptyDestTest); + sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); + return 0; }else{ - if( nIncr>0 && pFKey->isDeferred==0 ){ - sqlite3ParseToplevel(pParse)->mayAbort = 1; - } - sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); + return 1; } - - sqlite3VdbeResolveLabel(v, iOk); - sqlite3VdbeAddOp1(v, OP_Close, iCur); } +#endif /* SQLITE_OMIT_XFER_OPT */ +/************** End of insert.c **********************************************/ +/************** Begin file legacy.c ******************************************/ /* -** This function is called to generate code executed when a row is deleted -** from the parent table of foreign key constraint pFKey and, if pFKey is -** deferred, when a row is inserted into the same table. When generating -** code for an SQL UPDATE operation, this function may be called twice - -** once to "delete" the old row and once to "insert" the new row. -** -** The code generated by this function scans through the rows in the child -** table that correspond to the parent table row being deleted or inserted. -** For each child row found, one of the following actions is taken: -** -** Operation | FK type | Action taken -** -------------------------------------------------------------------------- -** DELETE immediate Increment the "immediate constraint counter". -** Or, if the ON (UPDATE|DELETE) action is RESTRICT, -** throw a "foreign key constraint failed" exception. +** 2001 September 15 ** -** INSERT immediate Decrement the "immediate constraint counter". +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** DELETE deferred Increment the "deferred constraint counter". -** Or, if the ON (UPDATE|DELETE) action is RESTRICT, -** throw a "foreign key constraint failed" exception. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** INSERT deferred Decrement the "deferred constraint counter". +************************************************************************* +** Main file for the SQLite library. The routines in this file +** implement the programmer interface to the library. Routines in +** other files are for internal use by SQLite and should not be +** accessed by users of the library. +*/ + + +/* +** Execute SQL code. Return one of the SQLITE_ success/failure +** codes. Also write an error message into memory obtained from +** malloc() and make *pzErrMsg point to that message. ** -** These operations are identified in the comment at the top of this file -** (fkey.c) as "I.2" and "D.2". +** If the SQL is a query, then for each row in the query result +** the xCallback() function is called. pArg becomes the first +** argument to xCallback(). If xCallback=NULL then no callback +** is invoked, even for queries. */ -static void fkScanChildren( - Parse *pParse, /* Parse context */ - SrcList *pSrc, /* SrcList containing the table to scan */ - Table *pTab, - Index *pIdx, /* Foreign key index */ - FKey *pFKey, /* Foreign key relationship */ - int *aiCol, /* Map from pIdx cols to child table cols */ - int regData, /* Referenced table data starts here */ - int nIncr /* Amount to increment deferred counter by */ +SQLITE_API int sqlite3_exec( + sqlite3 *db, /* The database on which the SQL executes */ + const char *zSql, /* The SQL to be executed */ + sqlite3_callback xCallback, /* Invoke this callback routine */ + void *pArg, /* First argument to xCallback() */ + char **pzErrMsg /* Write error messages here */ ){ - sqlite3 *db = pParse->db; /* Database handle */ - int i; /* Iterator variable */ - Expr *pWhere = 0; /* WHERE clause to scan with */ - NameContext sNameContext; /* Context used to resolve WHERE clause */ - WhereInfo *pWInfo; /* Context used by sqlite3WhereXXX() */ - int iFkIfZero = 0; /* Address of OP_FkIfZero */ - Vdbe *v = sqlite3GetVdbe(pParse); + int rc = SQLITE_OK; /* Return code */ + const char *zLeftover; /* Tail of unprocessed SQL */ + sqlite3_stmt *pStmt = 0; /* The current SQL statement */ + char **azCols = 0; /* Names of result columns */ + int callbackIsInit; /* True if callback data is initialized */ - assert( !pIdx || pIdx->pTable==pTab ); + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; + if( zSql==0 ) zSql = ""; - if( nIncr<0 ){ - iFkIfZero = sqlite3VdbeAddOp2(v, OP_FkIfZero, pFKey->isDeferred, 0); - } + sqlite3_mutex_enter(db->mutex); + sqlite3Error(db, SQLITE_OK); + while( rc==SQLITE_OK && zSql[0] ){ + int nCol; + char **azVals = 0; - /* Create an Expr object representing an SQL expression like: - ** - ** = AND = ... - ** - ** The collation sequence used for the comparison should be that of - ** the parent key columns. The affinity of the parent key column should - ** be applied to each child key value before the comparison takes place. - */ - for(i=0; inCol; i++){ - Expr *pLeft; /* Value from parent table row */ - Expr *pRight; /* Column ref to child table */ - Expr *pEq; /* Expression (pLeft = pRight) */ - int iCol; /* Index of column in child table */ - const char *zCol; /* Name of column in child table */ + pStmt = 0; + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, &zLeftover); + assert( rc==SQLITE_OK || pStmt==0 ); + if( rc!=SQLITE_OK ){ + continue; + } + if( !pStmt ){ + /* this happens for a comment or white-space */ + zSql = zLeftover; + continue; + } - pLeft = sqlite3Expr(db, TK_REGISTER, 0); - if( pLeft ){ - /* Set the collation sequence and affinity of the LHS of each TK_EQ - ** expression to the parent key column defaults. */ - if( pIdx ){ - Column *pCol; - iCol = pIdx->aiColumn[i]; - pCol = &pTab->aCol[iCol]; - if( pTab->iPKey==iCol ) iCol = -1; - pLeft->iTable = regData+iCol+1; - pLeft->affinity = pCol->affinity; - pLeft->pColl = sqlite3LocateCollSeq(pParse, pCol->zColl); - }else{ - pLeft->iTable = regData; - pLeft->affinity = SQLITE_AFF_INTEGER; + callbackIsInit = 0; + nCol = sqlite3_column_count(pStmt); + + while( 1 ){ + int i; + rc = sqlite3_step(pStmt); + + /* Invoke the callback function if required */ + if( xCallback && (SQLITE_ROW==rc || + (SQLITE_DONE==rc && !callbackIsInit + && db->flags&SQLITE_NullCallback)) ){ + if( !callbackIsInit ){ + azCols = sqlite3DbMallocZero(db, 2*nCol*sizeof(const char*) + 1); + if( azCols==0 ){ + goto exec_out; + } + for(i=0; imallocFailed = 1; + goto exec_out; + } + } + } + if( xCallback(pArg, nCol, azVals, azCols) ){ + /* EVIDENCE-OF: R-38229-40159 If the callback function to + ** sqlite3_exec() returns non-zero, then sqlite3_exec() will + ** return SQLITE_ABORT. */ + rc = SQLITE_ABORT; + sqlite3VdbeFinalize((Vdbe *)pStmt); + pStmt = 0; + sqlite3Error(db, SQLITE_ABORT); + goto exec_out; + } + } + + if( rc!=SQLITE_ROW ){ + rc = sqlite3VdbeFinalize((Vdbe *)pStmt); + pStmt = 0; + zSql = zLeftover; + while( sqlite3Isspace(zSql[0]) ) zSql++; + break; } } - iCol = aiCol ? aiCol[i] : pFKey->aCol[0].iFrom; - assert( iCol>=0 ); - zCol = pFKey->pFrom->aCol[iCol].zName; - pRight = sqlite3Expr(db, TK_ID, zCol); - pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0); - pWhere = sqlite3ExprAnd(db, pWhere, pEq); - } - /* If the child table is the same as the parent table, and this scan - ** is taking place as part of a DELETE operation (operation D.2), omit the - ** row being deleted from the scan by adding ($rowid != rowid) to the WHERE - ** clause, where $rowid is the rowid of the row being deleted. */ - if( pTab==pFKey->pFrom && nIncr>0 ){ - Expr *pEq; /* Expression (pLeft = pRight) */ - Expr *pLeft; /* Value from parent table row */ - Expr *pRight; /* Column ref to child table */ - pLeft = sqlite3Expr(db, TK_REGISTER, 0); - pRight = sqlite3Expr(db, TK_COLUMN, 0); - if( pLeft && pRight ){ - pLeft->iTable = regData; - pLeft->affinity = SQLITE_AFF_INTEGER; - pRight->iTable = pSrc->a[0].iCursor; - pRight->iColumn = -1; - } - pEq = sqlite3PExpr(pParse, TK_NE, pLeft, pRight, 0); - pWhere = sqlite3ExprAnd(db, pWhere, pEq); + sqlite3DbFree(db, azCols); + azCols = 0; } - /* Resolve the references in the WHERE clause. */ - memset(&sNameContext, 0, sizeof(NameContext)); - sNameContext.pSrcList = pSrc; - sNameContext.pParse = pParse; - sqlite3ResolveExprNames(&sNameContext, pWhere); +exec_out: + if( pStmt ) sqlite3VdbeFinalize((Vdbe *)pStmt); + sqlite3DbFree(db, azCols); - /* Create VDBE to loop through the entries in pSrc that match the WHERE - ** clause. If the constraint is not deferred, throw an exception for - ** each row found. Otherwise, for deferred constraints, increment the - ** deferred constraint counter by nIncr for each row selected. */ - pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0); - if( nIncr>0 && pFKey->isDeferred==0 ){ - sqlite3ParseToplevel(pParse)->mayAbort = 1; - } - sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); - if( pWInfo ){ - sqlite3WhereEnd(pWInfo); + rc = sqlite3ApiExit(db, rc); + if( rc!=SQLITE_OK && pzErrMsg ){ + int nErrMsg = 1 + sqlite3Strlen30(sqlite3_errmsg(db)); + *pzErrMsg = sqlite3Malloc(nErrMsg); + if( *pzErrMsg ){ + memcpy(*pzErrMsg, sqlite3_errmsg(db), nErrMsg); + }else{ + rc = SQLITE_NOMEM; + sqlite3Error(db, SQLITE_NOMEM); + } + }else if( pzErrMsg ){ + *pzErrMsg = 0; } - /* Clean up the WHERE clause constructed above. */ - sqlite3ExprDelete(db, pWhere); - if( iFkIfZero ){ - sqlite3VdbeJumpHere(v, iFkIfZero); - } + assert( (rc&db->errMask)==rc ); + sqlite3_mutex_leave(db->mutex); + return rc; } +/************** End of legacy.c **********************************************/ +/************** Begin file loadext.c *****************************************/ /* -** This function returns a pointer to the head of a linked list of FK -** constraints for which table pTab is the parent table. For example, -** given the following schema: +** 2006 June 7 ** -** CREATE TABLE t1(a PRIMARY KEY); -** CREATE TABLE t2(b REFERENCES t1(a); +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** Calling this function with table "t1" as an argument returns a pointer -** to the FKey structure representing the foreign key constraint on table -** "t2". Calling this function with "t2" as the argument would return a -** NULL pointer (as there are no FK constraints for which t2 is the parent -** table). +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code used to dynamically load extensions into +** the SQLite library. */ -SQLITE_PRIVATE FKey *sqlite3FkReferences(Table *pTab){ - int nName = sqlite3Strlen30(pTab->zName); - return (FKey *)sqlite3HashFind(&pTab->pSchema->fkeyHash, pTab->zName, nName); -} +#ifndef SQLITE_CORE + #define SQLITE_CORE 1 /* Disable the API redefinition in sqlite3ext.h */ +#endif +/************** Include sqlite3ext.h in the middle of loadext.c **************/ +/************** Begin file sqlite3ext.h **************************************/ /* -** The second argument is a Trigger structure allocated by the -** fkActionTrigger() routine. This function deletes the Trigger structure -** and all of its sub-components. +** 2006 June 7 ** -** The Trigger structure or any of its sub-components may be allocated from -** the lookaside buffer belonging to database handle dbMem. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This header file defines the SQLite interface for use by +** shared libraries that want to be imported as extensions into +** an SQLite instance. Shared libraries that intend to be loaded +** as extensions by SQLite should #include this file instead of +** sqlite3.h. */ -static void fkTriggerDelete(sqlite3 *dbMem, Trigger *p){ - if( p ){ - TriggerStep *pStep = p->step_list; - sqlite3ExprDelete(dbMem, pStep->pWhere); - sqlite3ExprListDelete(dbMem, pStep->pExprList); - sqlite3SelectDelete(dbMem, pStep->pSelect); - sqlite3ExprDelete(dbMem, p->pWhen); - sqlite3DbFree(dbMem, p); - } -} +#ifndef _SQLITE3EXT_H_ +#define _SQLITE3EXT_H_ + +typedef struct sqlite3_api_routines sqlite3_api_routines; + +/* +** The following structure holds pointers to all of the SQLite API +** routines. +** +** WARNING: In order to maintain backwards compatibility, add new +** interfaces to the end of this structure only. If you insert new +** interfaces in the middle of this structure, then older different +** versions of SQLite will not be able to load each other's shared +** libraries! +*/ +struct sqlite3_api_routines { + void * (*aggregate_context)(sqlite3_context*,int nBytes); + int (*aggregate_count)(sqlite3_context*); + int (*bind_blob)(sqlite3_stmt*,int,const void*,int n,void(*)(void*)); + int (*bind_double)(sqlite3_stmt*,int,double); + int (*bind_int)(sqlite3_stmt*,int,int); + int (*bind_int64)(sqlite3_stmt*,int,sqlite_int64); + int (*bind_null)(sqlite3_stmt*,int); + int (*bind_parameter_count)(sqlite3_stmt*); + int (*bind_parameter_index)(sqlite3_stmt*,const char*zName); + const char * (*bind_parameter_name)(sqlite3_stmt*,int); + int (*bind_text)(sqlite3_stmt*,int,const char*,int n,void(*)(void*)); + int (*bind_text16)(sqlite3_stmt*,int,const void*,int,void(*)(void*)); + int (*bind_value)(sqlite3_stmt*,int,const sqlite3_value*); + int (*busy_handler)(sqlite3*,int(*)(void*,int),void*); + int (*busy_timeout)(sqlite3*,int ms); + int (*changes)(sqlite3*); + int (*close)(sqlite3*); + int (*collation_needed)(sqlite3*,void*,void(*)(void*,sqlite3*, + int eTextRep,const char*)); + int (*collation_needed16)(sqlite3*,void*,void(*)(void*,sqlite3*, + int eTextRep,const void*)); + const void * (*column_blob)(sqlite3_stmt*,int iCol); + int (*column_bytes)(sqlite3_stmt*,int iCol); + int (*column_bytes16)(sqlite3_stmt*,int iCol); + int (*column_count)(sqlite3_stmt*pStmt); + const char * (*column_database_name)(sqlite3_stmt*,int); + const void * (*column_database_name16)(sqlite3_stmt*,int); + const char * (*column_decltype)(sqlite3_stmt*,int i); + const void * (*column_decltype16)(sqlite3_stmt*,int); + double (*column_double)(sqlite3_stmt*,int iCol); + int (*column_int)(sqlite3_stmt*,int iCol); + sqlite_int64 (*column_int64)(sqlite3_stmt*,int iCol); + const char * (*column_name)(sqlite3_stmt*,int); + const void * (*column_name16)(sqlite3_stmt*,int); + const char * (*column_origin_name)(sqlite3_stmt*,int); + const void * (*column_origin_name16)(sqlite3_stmt*,int); + const char * (*column_table_name)(sqlite3_stmt*,int); + const void * (*column_table_name16)(sqlite3_stmt*,int); + const unsigned char * (*column_text)(sqlite3_stmt*,int iCol); + const void * (*column_text16)(sqlite3_stmt*,int iCol); + int (*column_type)(sqlite3_stmt*,int iCol); + sqlite3_value* (*column_value)(sqlite3_stmt*,int iCol); + void * (*commit_hook)(sqlite3*,int(*)(void*),void*); + int (*complete)(const char*sql); + int (*complete16)(const void*sql); + int (*create_collation)(sqlite3*,const char*,int,void*, + int(*)(void*,int,const void*,int,const void*)); + int (*create_collation16)(sqlite3*,const void*,int,void*, + int(*)(void*,int,const void*,int,const void*)); + int (*create_function)(sqlite3*,const char*,int,int,void*, + void (*xFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*)); + int (*create_function16)(sqlite3*,const void*,int,int,void*, + void (*xFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*)); + int (*create_module)(sqlite3*,const char*,const sqlite3_module*,void*); + int (*data_count)(sqlite3_stmt*pStmt); + sqlite3 * (*db_handle)(sqlite3_stmt*); + int (*declare_vtab)(sqlite3*,const char*); + int (*enable_shared_cache)(int); + int (*errcode)(sqlite3*db); + const char * (*errmsg)(sqlite3*); + const void * (*errmsg16)(sqlite3*); + int (*exec)(sqlite3*,const char*,sqlite3_callback,void*,char**); + int (*expired)(sqlite3_stmt*); + int (*finalize)(sqlite3_stmt*pStmt); + void (*free)(void*); + void (*free_table)(char**result); + int (*get_autocommit)(sqlite3*); + void * (*get_auxdata)(sqlite3_context*,int); + int (*get_table)(sqlite3*,const char*,char***,int*,int*,char**); + int (*global_recover)(void); + void (*interruptx)(sqlite3*); + sqlite_int64 (*last_insert_rowid)(sqlite3*); + const char * (*libversion)(void); + int (*libversion_number)(void); + void *(*malloc)(int); + char * (*mprintf)(const char*,...); + int (*open)(const char*,sqlite3**); + int (*open16)(const void*,sqlite3**); + int (*prepare)(sqlite3*,const char*,int,sqlite3_stmt**,const char**); + int (*prepare16)(sqlite3*,const void*,int,sqlite3_stmt**,const void**); + void * (*profile)(sqlite3*,void(*)(void*,const char*,sqlite_uint64),void*); + void (*progress_handler)(sqlite3*,int,int(*)(void*),void*); + void *(*realloc)(void*,int); + int (*reset)(sqlite3_stmt*pStmt); + void (*result_blob)(sqlite3_context*,const void*,int,void(*)(void*)); + void (*result_double)(sqlite3_context*,double); + void (*result_error)(sqlite3_context*,const char*,int); + void (*result_error16)(sqlite3_context*,const void*,int); + void (*result_int)(sqlite3_context*,int); + void (*result_int64)(sqlite3_context*,sqlite_int64); + void (*result_null)(sqlite3_context*); + void (*result_text)(sqlite3_context*,const char*,int,void(*)(void*)); + void (*result_text16)(sqlite3_context*,const void*,int,void(*)(void*)); + void (*result_text16be)(sqlite3_context*,const void*,int,void(*)(void*)); + void (*result_text16le)(sqlite3_context*,const void*,int,void(*)(void*)); + void (*result_value)(sqlite3_context*,sqlite3_value*); + void * (*rollback_hook)(sqlite3*,void(*)(void*),void*); + int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*, + const char*,const char*),void*); + void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*)); + char * (*snprintf)(int,char*,const char*,...); + int (*step)(sqlite3_stmt*); + int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*, + char const**,char const**,int*,int*,int*); + void (*thread_cleanup)(void); + int (*total_changes)(sqlite3*); + void * (*trace)(sqlite3*,void(*xTrace)(void*,const char*),void*); + int (*transfer_bindings)(sqlite3_stmt*,sqlite3_stmt*); + void * (*update_hook)(sqlite3*,void(*)(void*,int ,char const*,char const*, + sqlite_int64),void*); + void * (*user_data)(sqlite3_context*); + const void * (*value_blob)(sqlite3_value*); + int (*value_bytes)(sqlite3_value*); + int (*value_bytes16)(sqlite3_value*); + double (*value_double)(sqlite3_value*); + int (*value_int)(sqlite3_value*); + sqlite_int64 (*value_int64)(sqlite3_value*); + int (*value_numeric_type)(sqlite3_value*); + const unsigned char * (*value_text)(sqlite3_value*); + const void * (*value_text16)(sqlite3_value*); + const void * (*value_text16be)(sqlite3_value*); + const void * (*value_text16le)(sqlite3_value*); + int (*value_type)(sqlite3_value*); + char *(*vmprintf)(const char*,va_list); + /* Added ??? */ + int (*overload_function)(sqlite3*, const char *zFuncName, int nArg); + /* Added by 3.3.13 */ + int (*prepare_v2)(sqlite3*,const char*,int,sqlite3_stmt**,const char**); + int (*prepare16_v2)(sqlite3*,const void*,int,sqlite3_stmt**,const void**); + int (*clear_bindings)(sqlite3_stmt*); + /* Added by 3.4.1 */ + int (*create_module_v2)(sqlite3*,const char*,const sqlite3_module*,void*, + void (*xDestroy)(void *)); + /* Added by 3.5.0 */ + int (*bind_zeroblob)(sqlite3_stmt*,int,int); + int (*blob_bytes)(sqlite3_blob*); + int (*blob_close)(sqlite3_blob*); + int (*blob_open)(sqlite3*,const char*,const char*,const char*,sqlite3_int64, + int,sqlite3_blob**); + int (*blob_read)(sqlite3_blob*,void*,int,int); + int (*blob_write)(sqlite3_blob*,const void*,int,int); + int (*create_collation_v2)(sqlite3*,const char*,int,void*, + int(*)(void*,int,const void*,int,const void*), + void(*)(void*)); + int (*file_control)(sqlite3*,const char*,int,void*); + sqlite3_int64 (*memory_highwater)(int); + sqlite3_int64 (*memory_used)(void); + sqlite3_mutex *(*mutex_alloc)(int); + void (*mutex_enter)(sqlite3_mutex*); + void (*mutex_free)(sqlite3_mutex*); + void (*mutex_leave)(sqlite3_mutex*); + int (*mutex_try)(sqlite3_mutex*); + int (*open_v2)(const char*,sqlite3**,int,const char*); + int (*release_memory)(int); + void (*result_error_nomem)(sqlite3_context*); + void (*result_error_toobig)(sqlite3_context*); + int (*sleep)(int); + void (*soft_heap_limit)(int); + sqlite3_vfs *(*vfs_find)(const char*); + int (*vfs_register)(sqlite3_vfs*,int); + int (*vfs_unregister)(sqlite3_vfs*); + int (*xthreadsafe)(void); + void (*result_zeroblob)(sqlite3_context*,int); + void (*result_error_code)(sqlite3_context*,int); + int (*test_control)(int, ...); + void (*randomness)(int,void*); + sqlite3 *(*context_db_handle)(sqlite3_context*); + int (*extended_result_codes)(sqlite3*,int); + int (*limit)(sqlite3*,int,int); + sqlite3_stmt *(*next_stmt)(sqlite3*,sqlite3_stmt*); + const char *(*sql)(sqlite3_stmt*); + int (*status)(int,int*,int*,int); + int (*backup_finish)(sqlite3_backup*); + sqlite3_backup *(*backup_init)(sqlite3*,const char*,sqlite3*,const char*); + int (*backup_pagecount)(sqlite3_backup*); + int (*backup_remaining)(sqlite3_backup*); + int (*backup_step)(sqlite3_backup*,int); + const char *(*compileoption_get)(int); + int (*compileoption_used)(const char*); + int (*create_function_v2)(sqlite3*,const char*,int,int,void*, + void (*xFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void(*xDestroy)(void*)); + int (*db_config)(sqlite3*,int,...); + sqlite3_mutex *(*db_mutex)(sqlite3*); + int (*db_status)(sqlite3*,int,int*,int*,int); + int (*extended_errcode)(sqlite3*); + void (*log)(int,const char*,...); + sqlite3_int64 (*soft_heap_limit64)(sqlite3_int64); + const char *(*sourceid)(void); + int (*stmt_status)(sqlite3_stmt*,int,int); + int (*strnicmp)(const char*,const char*,int); + int (*unlock_notify)(sqlite3*,void(*)(void**,int),void*); + int (*wal_autocheckpoint)(sqlite3*,int); + int (*wal_checkpoint)(sqlite3*,const char*); + void *(*wal_hook)(sqlite3*,int(*)(void*,sqlite3*,const char*,int),void*); + int (*blob_reopen)(sqlite3_blob*,sqlite3_int64); + int (*vtab_config)(sqlite3*,int op,...); + int (*vtab_on_conflict)(sqlite3*); + /* Version 3.7.16 and later */ + int (*close_v2)(sqlite3*); + const char *(*db_filename)(sqlite3*,const char*); + int (*db_readonly)(sqlite3*,const char*); + int (*db_release_memory)(sqlite3*); + const char *(*errstr)(int); + int (*stmt_busy)(sqlite3_stmt*); + int (*stmt_readonly)(sqlite3_stmt*); + int (*stricmp)(const char*,const char*); + int (*uri_boolean)(const char*,const char*,int); + sqlite3_int64 (*uri_int64)(const char*,const char*,sqlite3_int64); + const char *(*uri_parameter)(const char*,const char*); + char *(*vsnprintf)(int,char*,const char*,va_list); + int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*); + /* Version 3.8.7 and later */ + int (*auto_extension)(void(*)(void)); + int (*bind_blob64)(sqlite3_stmt*,int,const void*,sqlite3_uint64, + void(*)(void*)); + int (*bind_text64)(sqlite3_stmt*,int,const char*,sqlite3_uint64, + void(*)(void*),unsigned char); + int (*cancel_auto_extension)(void(*)(void)); + int (*load_extension)(sqlite3*,const char*,const char*,char**); + void *(*malloc64)(sqlite3_uint64); + sqlite3_uint64 (*msize)(void*); + void *(*realloc64)(void*,sqlite3_uint64); + void (*reset_auto_extension)(void); + void (*result_blob64)(sqlite3_context*,const void*,sqlite3_uint64, + void(*)(void*)); + void (*result_text64)(sqlite3_context*,const char*,sqlite3_uint64, + void(*)(void*), unsigned char); + int (*strglob)(const char*,const char*); +}; /* -** This function is called to generate code that runs when table pTab is -** being dropped from the database. The SrcList passed as the second argument -** to this function contains a single entry guaranteed to resolve to -** table pTab. -** -** Normally, no code is required. However, if either -** -** (a) The table is the parent table of a FK constraint, or -** (b) The table is the child table of a deferred FK constraint and it is -** determined at runtime that there are outstanding deferred FK -** constraint violations in the database, +** The following macros redefine the API routines so that they are +** redirected through the global sqlite3_api structure. ** -** then the equivalent of "DELETE FROM " is executed before dropping -** the table from the database. Triggers are disabled while running this -** DELETE, but foreign key actions are not. +** This header file is also used by the loadext.c source file +** (part of the main SQLite library - not an extension) so that +** it can get access to the sqlite3_api_routines structure +** definition. But the main library does not want to redefine +** the API. So the redefinition macros are only valid if the +** SQLITE_CORE macros is undefined. */ -SQLITE_PRIVATE void sqlite3FkDropTable(Parse *pParse, SrcList *pName, Table *pTab){ - sqlite3 *db = pParse->db; - if( (db->flags&SQLITE_ForeignKeys) && !IsVirtual(pTab) && !pTab->pSelect ){ - int iSkip = 0; - Vdbe *v = sqlite3GetVdbe(pParse); +#ifndef SQLITE_CORE +#define sqlite3_aggregate_context sqlite3_api->aggregate_context +#ifndef SQLITE_OMIT_DEPRECATED +#define sqlite3_aggregate_count sqlite3_api->aggregate_count +#endif +#define sqlite3_bind_blob sqlite3_api->bind_blob +#define sqlite3_bind_double sqlite3_api->bind_double +#define sqlite3_bind_int sqlite3_api->bind_int +#define sqlite3_bind_int64 sqlite3_api->bind_int64 +#define sqlite3_bind_null sqlite3_api->bind_null +#define sqlite3_bind_parameter_count sqlite3_api->bind_parameter_count +#define sqlite3_bind_parameter_index sqlite3_api->bind_parameter_index +#define sqlite3_bind_parameter_name sqlite3_api->bind_parameter_name +#define sqlite3_bind_text sqlite3_api->bind_text +#define sqlite3_bind_text16 sqlite3_api->bind_text16 +#define sqlite3_bind_value sqlite3_api->bind_value +#define sqlite3_busy_handler sqlite3_api->busy_handler +#define sqlite3_busy_timeout sqlite3_api->busy_timeout +#define sqlite3_changes sqlite3_api->changes +#define sqlite3_close sqlite3_api->close +#define sqlite3_collation_needed sqlite3_api->collation_needed +#define sqlite3_collation_needed16 sqlite3_api->collation_needed16 +#define sqlite3_column_blob sqlite3_api->column_blob +#define sqlite3_column_bytes sqlite3_api->column_bytes +#define sqlite3_column_bytes16 sqlite3_api->column_bytes16 +#define sqlite3_column_count sqlite3_api->column_count +#define sqlite3_column_database_name sqlite3_api->column_database_name +#define sqlite3_column_database_name16 sqlite3_api->column_database_name16 +#define sqlite3_column_decltype sqlite3_api->column_decltype +#define sqlite3_column_decltype16 sqlite3_api->column_decltype16 +#define sqlite3_column_double sqlite3_api->column_double +#define sqlite3_column_int sqlite3_api->column_int +#define sqlite3_column_int64 sqlite3_api->column_int64 +#define sqlite3_column_name sqlite3_api->column_name +#define sqlite3_column_name16 sqlite3_api->column_name16 +#define sqlite3_column_origin_name sqlite3_api->column_origin_name +#define sqlite3_column_origin_name16 sqlite3_api->column_origin_name16 +#define sqlite3_column_table_name sqlite3_api->column_table_name +#define sqlite3_column_table_name16 sqlite3_api->column_table_name16 +#define sqlite3_column_text sqlite3_api->column_text +#define sqlite3_column_text16 sqlite3_api->column_text16 +#define sqlite3_column_type sqlite3_api->column_type +#define sqlite3_column_value sqlite3_api->column_value +#define sqlite3_commit_hook sqlite3_api->commit_hook +#define sqlite3_complete sqlite3_api->complete +#define sqlite3_complete16 sqlite3_api->complete16 +#define sqlite3_create_collation sqlite3_api->create_collation +#define sqlite3_create_collation16 sqlite3_api->create_collation16 +#define sqlite3_create_function sqlite3_api->create_function +#define sqlite3_create_function16 sqlite3_api->create_function16 +#define sqlite3_create_module sqlite3_api->create_module +#define sqlite3_create_module_v2 sqlite3_api->create_module_v2 +#define sqlite3_data_count sqlite3_api->data_count +#define sqlite3_db_handle sqlite3_api->db_handle +#define sqlite3_declare_vtab sqlite3_api->declare_vtab +#define sqlite3_enable_shared_cache sqlite3_api->enable_shared_cache +#define sqlite3_errcode sqlite3_api->errcode +#define sqlite3_errmsg sqlite3_api->errmsg +#define sqlite3_errmsg16 sqlite3_api->errmsg16 +#define sqlite3_exec sqlite3_api->exec +#ifndef SQLITE_OMIT_DEPRECATED +#define sqlite3_expired sqlite3_api->expired +#endif +#define sqlite3_finalize sqlite3_api->finalize +#define sqlite3_free sqlite3_api->free +#define sqlite3_free_table sqlite3_api->free_table +#define sqlite3_get_autocommit sqlite3_api->get_autocommit +#define sqlite3_get_auxdata sqlite3_api->get_auxdata +#define sqlite3_get_table sqlite3_api->get_table +#ifndef SQLITE_OMIT_DEPRECATED +#define sqlite3_global_recover sqlite3_api->global_recover +#endif +#define sqlite3_interrupt sqlite3_api->interruptx +#define sqlite3_last_insert_rowid sqlite3_api->last_insert_rowid +#define sqlite3_libversion sqlite3_api->libversion +#define sqlite3_libversion_number sqlite3_api->libversion_number +#define sqlite3_malloc sqlite3_api->malloc +#define sqlite3_mprintf sqlite3_api->mprintf +#define sqlite3_open sqlite3_api->open +#define sqlite3_open16 sqlite3_api->open16 +#define sqlite3_prepare sqlite3_api->prepare +#define sqlite3_prepare16 sqlite3_api->prepare16 +#define sqlite3_prepare_v2 sqlite3_api->prepare_v2 +#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 +#define sqlite3_profile sqlite3_api->profile +#define sqlite3_progress_handler sqlite3_api->progress_handler +#define sqlite3_realloc sqlite3_api->realloc +#define sqlite3_reset sqlite3_api->reset +#define sqlite3_result_blob sqlite3_api->result_blob +#define sqlite3_result_double sqlite3_api->result_double +#define sqlite3_result_error sqlite3_api->result_error +#define sqlite3_result_error16 sqlite3_api->result_error16 +#define sqlite3_result_int sqlite3_api->result_int +#define sqlite3_result_int64 sqlite3_api->result_int64 +#define sqlite3_result_null sqlite3_api->result_null +#define sqlite3_result_text sqlite3_api->result_text +#define sqlite3_result_text16 sqlite3_api->result_text16 +#define sqlite3_result_text16be sqlite3_api->result_text16be +#define sqlite3_result_text16le sqlite3_api->result_text16le +#define sqlite3_result_value sqlite3_api->result_value +#define sqlite3_rollback_hook sqlite3_api->rollback_hook +#define sqlite3_set_authorizer sqlite3_api->set_authorizer +#define sqlite3_set_auxdata sqlite3_api->set_auxdata +#define sqlite3_snprintf sqlite3_api->snprintf +#define sqlite3_step sqlite3_api->step +#define sqlite3_table_column_metadata sqlite3_api->table_column_metadata +#define sqlite3_thread_cleanup sqlite3_api->thread_cleanup +#define sqlite3_total_changes sqlite3_api->total_changes +#define sqlite3_trace sqlite3_api->trace +#ifndef SQLITE_OMIT_DEPRECATED +#define sqlite3_transfer_bindings sqlite3_api->transfer_bindings +#endif +#define sqlite3_update_hook sqlite3_api->update_hook +#define sqlite3_user_data sqlite3_api->user_data +#define sqlite3_value_blob sqlite3_api->value_blob +#define sqlite3_value_bytes sqlite3_api->value_bytes +#define sqlite3_value_bytes16 sqlite3_api->value_bytes16 +#define sqlite3_value_double sqlite3_api->value_double +#define sqlite3_value_int sqlite3_api->value_int +#define sqlite3_value_int64 sqlite3_api->value_int64 +#define sqlite3_value_numeric_type sqlite3_api->value_numeric_type +#define sqlite3_value_text sqlite3_api->value_text +#define sqlite3_value_text16 sqlite3_api->value_text16 +#define sqlite3_value_text16be sqlite3_api->value_text16be +#define sqlite3_value_text16le sqlite3_api->value_text16le +#define sqlite3_value_type sqlite3_api->value_type +#define sqlite3_vmprintf sqlite3_api->vmprintf +#define sqlite3_overload_function sqlite3_api->overload_function +#define sqlite3_prepare_v2 sqlite3_api->prepare_v2 +#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 +#define sqlite3_clear_bindings sqlite3_api->clear_bindings +#define sqlite3_bind_zeroblob sqlite3_api->bind_zeroblob +#define sqlite3_blob_bytes sqlite3_api->blob_bytes +#define sqlite3_blob_close sqlite3_api->blob_close +#define sqlite3_blob_open sqlite3_api->blob_open +#define sqlite3_blob_read sqlite3_api->blob_read +#define sqlite3_blob_write sqlite3_api->blob_write +#define sqlite3_create_collation_v2 sqlite3_api->create_collation_v2 +#define sqlite3_file_control sqlite3_api->file_control +#define sqlite3_memory_highwater sqlite3_api->memory_highwater +#define sqlite3_memory_used sqlite3_api->memory_used +#define sqlite3_mutex_alloc sqlite3_api->mutex_alloc +#define sqlite3_mutex_enter sqlite3_api->mutex_enter +#define sqlite3_mutex_free sqlite3_api->mutex_free +#define sqlite3_mutex_leave sqlite3_api->mutex_leave +#define sqlite3_mutex_try sqlite3_api->mutex_try +#define sqlite3_open_v2 sqlite3_api->open_v2 +#define sqlite3_release_memory sqlite3_api->release_memory +#define sqlite3_result_error_nomem sqlite3_api->result_error_nomem +#define sqlite3_result_error_toobig sqlite3_api->result_error_toobig +#define sqlite3_sleep sqlite3_api->sleep +#define sqlite3_soft_heap_limit sqlite3_api->soft_heap_limit +#define sqlite3_vfs_find sqlite3_api->vfs_find +#define sqlite3_vfs_register sqlite3_api->vfs_register +#define sqlite3_vfs_unregister sqlite3_api->vfs_unregister +#define sqlite3_threadsafe sqlite3_api->xthreadsafe +#define sqlite3_result_zeroblob sqlite3_api->result_zeroblob +#define sqlite3_result_error_code sqlite3_api->result_error_code +#define sqlite3_test_control sqlite3_api->test_control +#define sqlite3_randomness sqlite3_api->randomness +#define sqlite3_context_db_handle sqlite3_api->context_db_handle +#define sqlite3_extended_result_codes sqlite3_api->extended_result_codes +#define sqlite3_limit sqlite3_api->limit +#define sqlite3_next_stmt sqlite3_api->next_stmt +#define sqlite3_sql sqlite3_api->sql +#define sqlite3_status sqlite3_api->status +#define sqlite3_backup_finish sqlite3_api->backup_finish +#define sqlite3_backup_init sqlite3_api->backup_init +#define sqlite3_backup_pagecount sqlite3_api->backup_pagecount +#define sqlite3_backup_remaining sqlite3_api->backup_remaining +#define sqlite3_backup_step sqlite3_api->backup_step +#define sqlite3_compileoption_get sqlite3_api->compileoption_get +#define sqlite3_compileoption_used sqlite3_api->compileoption_used +#define sqlite3_create_function_v2 sqlite3_api->create_function_v2 +#define sqlite3_db_config sqlite3_api->db_config +#define sqlite3_db_mutex sqlite3_api->db_mutex +#define sqlite3_db_status sqlite3_api->db_status +#define sqlite3_extended_errcode sqlite3_api->extended_errcode +#define sqlite3_log sqlite3_api->log +#define sqlite3_soft_heap_limit64 sqlite3_api->soft_heap_limit64 +#define sqlite3_sourceid sqlite3_api->sourceid +#define sqlite3_stmt_status sqlite3_api->stmt_status +#define sqlite3_strnicmp sqlite3_api->strnicmp +#define sqlite3_unlock_notify sqlite3_api->unlock_notify +#define sqlite3_wal_autocheckpoint sqlite3_api->wal_autocheckpoint +#define sqlite3_wal_checkpoint sqlite3_api->wal_checkpoint +#define sqlite3_wal_hook sqlite3_api->wal_hook +#define sqlite3_blob_reopen sqlite3_api->blob_reopen +#define sqlite3_vtab_config sqlite3_api->vtab_config +#define sqlite3_vtab_on_conflict sqlite3_api->vtab_on_conflict +/* Version 3.7.16 and later */ +#define sqlite3_close_v2 sqlite3_api->close_v2 +#define sqlite3_db_filename sqlite3_api->db_filename +#define sqlite3_db_readonly sqlite3_api->db_readonly +#define sqlite3_db_release_memory sqlite3_api->db_release_memory +#define sqlite3_errstr sqlite3_api->errstr +#define sqlite3_stmt_busy sqlite3_api->stmt_busy +#define sqlite3_stmt_readonly sqlite3_api->stmt_readonly +#define sqlite3_stricmp sqlite3_api->stricmp +#define sqlite3_uri_boolean sqlite3_api->uri_boolean +#define sqlite3_uri_int64 sqlite3_api->uri_int64 +#define sqlite3_uri_parameter sqlite3_api->uri_parameter +#define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2 +/* Version 3.8.7 and later */ +#define sqlite3_auto_extension sqlite3_api->auto_extension +#define sqlite3_bind_blob64 sqlite3_api->bind_blob64 +#define sqlite3_bind_text64 sqlite3_api->bind_text64 +#define sqlite3_cancel_auto_extension sqlite3_api->cancel_auto_extension +#define sqlite3_load_extension sqlite3_api->load_extension +#define sqlite3_malloc64 sqlite3_api->malloc64 +#define sqlite3_msize sqlite3_api->msize +#define sqlite3_realloc64 sqlite3_api->realloc64 +#define sqlite3_reset_auto_extension sqlite3_api->reset_auto_extension +#define sqlite3_result_blob64 sqlite3_api->result_blob64 +#define sqlite3_result_text64 sqlite3_api->result_text64 +#define sqlite3_strglob sqlite3_api->strglob +#endif /* SQLITE_CORE */ - assert( v ); /* VDBE has already been allocated */ - if( sqlite3FkReferences(pTab)==0 ){ - /* Search for a deferred foreign key constraint for which this table - ** is the child table. If one cannot be found, return without - ** generating any VDBE code. If one can be found, then jump over - ** the entire DELETE if there are no outstanding deferred constraints - ** when this statement is run. */ - FKey *p; - for(p=pTab->pFKey; p; p=p->pNextFrom){ - if( p->isDeferred ) break; - } - if( !p ) return; - iSkip = sqlite3VdbeMakeLabel(v); - sqlite3VdbeAddOp2(v, OP_FkIfZero, 1, iSkip); - } +#ifndef SQLITE_CORE + /* This case when the file really is being compiled as a loadable + ** extension */ +# define SQLITE_EXTENSION_INIT1 const sqlite3_api_routines *sqlite3_api=0; +# define SQLITE_EXTENSION_INIT2(v) sqlite3_api=v; +# define SQLITE_EXTENSION_INIT3 \ + extern const sqlite3_api_routines *sqlite3_api; +#else + /* This case when the file is being statically linked into the + ** application */ +# define SQLITE_EXTENSION_INIT1 /*no-op*/ +# define SQLITE_EXTENSION_INIT2(v) (void)v; /* unused parameter */ +# define SQLITE_EXTENSION_INIT3 /*no-op*/ +#endif - pParse->disableTriggers = 1; - sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0); - pParse->disableTriggers = 0; +#endif /* _SQLITE3EXT_H_ */ - /* If the DELETE has generated immediate foreign key constraint - ** violations, halt the VDBE and return an error at this point, before - ** any modifications to the schema are made. This is because statement - ** transactions are not able to rollback schema changes. */ - sqlite3VdbeAddOp2(v, OP_FkIfZero, 0, sqlite3VdbeCurrentAddr(v)+2); - sqlite3HaltConstraint( - pParse, OE_Abort, "foreign key constraint failed", P4_STATIC - ); +/************** End of sqlite3ext.h ******************************************/ +/************** Continuing where we left off in loadext.c ********************/ +/* #include */ - if( iSkip ){ - sqlite3VdbeResolveLabel(v, iSkip); - } - } -} +#ifndef SQLITE_OMIT_LOAD_EXTENSION /* -** This function is called when inserting, deleting or updating a row of -** table pTab to generate VDBE code to perform foreign key constraint -** processing for the operation. -** -** For a DELETE operation, parameter regOld is passed the index of the -** first register in an array of (pTab->nCol+1) registers containing the -** rowid of the row being deleted, followed by each of the column values -** of the row being deleted, from left to right. Parameter regNew is passed -** zero in this case. -** -** For an INSERT operation, regOld is passed zero and regNew is passed the -** first register of an array of (pTab->nCol+1) registers containing the new -** row data. -** -** For an UPDATE operation, this function is called twice. Once before -** the original record is deleted from the table using the calling convention -** described for DELETE. Then again after the original record is deleted -** but before the new record is inserted using the INSERT convention. +** Some API routines are omitted when various features are +** excluded from a build of SQLite. Substitute a NULL pointer +** for any missing APIs. */ -SQLITE_PRIVATE void sqlite3FkCheck( - Parse *pParse, /* Parse context */ - Table *pTab, /* Row is being deleted from this table */ - int regOld, /* Previous row data is stored here */ - int regNew /* New row data is stored here */ -){ - sqlite3 *db = pParse->db; /* Database handle */ - FKey *pFKey; /* Used to iterate through FKs */ - int iDb; /* Index of database containing pTab */ - const char *zDb; /* Name of database containing pTab */ - int isIgnoreErrors = pParse->disableTriggers; - - /* Exactly one of regOld and regNew should be non-zero. */ - assert( (regOld==0)!=(regNew==0) ); - - /* If foreign-keys are disabled, this function is a no-op. */ - if( (db->flags&SQLITE_ForeignKeys)==0 ) return; - - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - zDb = db->aDb[iDb].zName; - - /* Loop through all the foreign key constraints for which pTab is the - ** child table (the table that the foreign key definition is part of). */ - for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){ - Table *pTo; /* Parent table of foreign key pFKey */ - Index *pIdx = 0; /* Index on key columns in pTo */ - int *aiFree = 0; - int *aiCol; - int iCol; - int i; - int isIgnore = 0; - - /* Find the parent table of this foreign key. Also find a unique index - ** on the parent key columns in the parent table. If either of these - ** schema items cannot be located, set an error in pParse and return - ** early. */ - if( pParse->disableTriggers ){ - pTo = sqlite3FindTable(db, pFKey->zTo, zDb); - }else{ - pTo = sqlite3LocateTable(pParse, 0, pFKey->zTo, zDb); - } - if( !pTo || locateFkeyIndex(pParse, pTo, pFKey, &pIdx, &aiFree) ){ - if( !isIgnoreErrors || db->mallocFailed ) return; - continue; - } - assert( pFKey->nCol==1 || (aiFree && pIdx) ); - - if( aiFree ){ - aiCol = aiFree; - }else{ - iCol = pFKey->aCol[0].iFrom; - aiCol = &iCol; - } - for(i=0; inCol; i++){ - if( aiCol[i]==pTab->iPKey ){ - aiCol[i] = -1; - } -#ifndef SQLITE_OMIT_AUTHORIZATION - /* Request permission to read the parent key columns. If the - ** authorization callback returns SQLITE_IGNORE, behave as if any - ** values read from the parent table are NULL. */ - if( db->xAuth ){ - int rcauth; - char *zCol = pTo->aCol[pIdx ? pIdx->aiColumn[i] : pTo->iPKey].zName; - rcauth = sqlite3AuthReadCol(pParse, pTo->zName, zCol, iDb); - isIgnore = (rcauth==SQLITE_IGNORE); - } +#ifndef SQLITE_ENABLE_COLUMN_METADATA +# define sqlite3_column_database_name 0 +# define sqlite3_column_database_name16 0 +# define sqlite3_column_table_name 0 +# define sqlite3_column_table_name16 0 +# define sqlite3_column_origin_name 0 +# define sqlite3_column_origin_name16 0 +# define sqlite3_table_column_metadata 0 #endif - } - - /* Take a shared-cache advisory read-lock on the parent table. Allocate - ** a cursor to use to search the unique index on the parent key columns - ** in the parent table. */ - sqlite3TableLock(pParse, iDb, pTo->tnum, 0, pTo->zName); - pParse->nTab++; - - if( regOld!=0 ){ - /* A row is being removed from the child table. Search for the parent. - ** If the parent does not exist, removing the child row resolves an - ** outstanding foreign key constraint violation. */ - fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regOld, -1,isIgnore); - } - if( regNew!=0 ){ - /* A row is being added to the child table. If a parent row cannot - ** be found, adding the child row has violated the FK constraint. */ - fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regNew, +1,isIgnore); - } - - sqlite3DbFree(db, aiFree); - } - - /* Loop through all the foreign key constraints that refer to this table */ - for(pFKey = sqlite3FkReferences(pTab); pFKey; pFKey=pFKey->pNextTo){ - Index *pIdx = 0; /* Foreign key index for pFKey */ - SrcList *pSrc; - int *aiCol = 0; - - if( !pFKey->isDeferred && !pParse->pToplevel && !pParse->isMultiWrite ){ - assert( regOld==0 && regNew!=0 ); - /* Inserting a single row into a parent table cannot cause an immediate - ** foreign key violation. So do nothing in this case. */ - continue; - } - - if( locateFkeyIndex(pParse, pTab, pFKey, &pIdx, &aiCol) ){ - if( !isIgnoreErrors || db->mallocFailed ) return; - continue; - } - assert( aiCol || pFKey->nCol==1 ); - /* Create a SrcList structure containing a single table (the table - ** the foreign key that refers to this table is attached to). This - ** is required for the sqlite3WhereXXX() interface. */ - pSrc = sqlite3SrcListAppend(db, 0, 0, 0); - if( pSrc ){ - struct SrcList_item *pItem = pSrc->a; - pItem->pTab = pFKey->pFrom; - pItem->zName = pFKey->pFrom->zName; - pItem->pTab->nRef++; - pItem->iCursor = pParse->nTab++; - - if( regNew!=0 ){ - fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regNew, -1); - } - if( regOld!=0 ){ - /* If there is a RESTRICT action configured for the current operation - ** on the parent table of this FK, then throw an exception - ** immediately if the FK constraint is violated, even if this is a - ** deferred trigger. That's what RESTRICT means. To defer checking - ** the constraint, the FK should specify NO ACTION (represented - ** using OE_None). NO ACTION is the default. */ - fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regOld, 1); - } - pItem->zName = 0; - sqlite3SrcListDelete(db, pSrc); - } - sqlite3DbFree(db, aiCol); - } -} +#ifdef SQLITE_OMIT_AUTHORIZATION +# define sqlite3_set_authorizer 0 +#endif -#define COLUMN_MASK(x) (((x)>31) ? 0xffffffff : ((u32)1<<(x))) +#ifdef SQLITE_OMIT_UTF16 +# define sqlite3_bind_text16 0 +# define sqlite3_collation_needed16 0 +# define sqlite3_column_decltype16 0 +# define sqlite3_column_name16 0 +# define sqlite3_column_text16 0 +# define sqlite3_complete16 0 +# define sqlite3_create_collation16 0 +# define sqlite3_create_function16 0 +# define sqlite3_errmsg16 0 +# define sqlite3_open16 0 +# define sqlite3_prepare16 0 +# define sqlite3_prepare16_v2 0 +# define sqlite3_result_error16 0 +# define sqlite3_result_text16 0 +# define sqlite3_result_text16be 0 +# define sqlite3_result_text16le 0 +# define sqlite3_value_text16 0 +# define sqlite3_value_text16be 0 +# define sqlite3_value_text16le 0 +# define sqlite3_column_database_name16 0 +# define sqlite3_column_table_name16 0 +# define sqlite3_column_origin_name16 0 +#endif -/* -** This function is called before generating code to update or delete a -** row contained in table pTab. -*/ -SQLITE_PRIVATE u32 sqlite3FkOldmask( - Parse *pParse, /* Parse context */ - Table *pTab /* Table being modified */ -){ - u32 mask = 0; - if( pParse->db->flags&SQLITE_ForeignKeys ){ - FKey *p; - int i; - for(p=pTab->pFKey; p; p=p->pNextFrom){ - for(i=0; inCol; i++) mask |= COLUMN_MASK(p->aCol[i].iFrom); - } - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - Index *pIdx = 0; - locateFkeyIndex(pParse, pTab, p, &pIdx, 0); - if( pIdx ){ - for(i=0; inColumn; i++) mask |= COLUMN_MASK(pIdx->aiColumn[i]); - } - } - } - return mask; -} +#ifdef SQLITE_OMIT_COMPLETE +# define sqlite3_complete 0 +# define sqlite3_complete16 0 +#endif -/* -** This function is called before generating code to update or delete a -** row contained in table pTab. If the operation is a DELETE, then -** parameter aChange is passed a NULL value. For an UPDATE, aChange points -** to an array of size N, where N is the number of columns in table pTab. -** If the i'th column is not modified by the UPDATE, then the corresponding -** entry in the aChange[] array is set to -1. If the column is modified, -** the value is 0 or greater. Parameter chngRowid is set to true if the -** UPDATE statement modifies the rowid fields of the table. -** -** If any foreign key processing will be required, this function returns -** true. If there is no foreign key related processing, this function -** returns false. -*/ -SQLITE_PRIVATE int sqlite3FkRequired( - Parse *pParse, /* Parse context */ - Table *pTab, /* Table being modified */ - int *aChange, /* Non-NULL for UPDATE operations */ - int chngRowid /* True for UPDATE that affects rowid */ -){ - if( pParse->db->flags&SQLITE_ForeignKeys ){ - if( !aChange ){ - /* A DELETE operation. Foreign key processing is required if the - ** table in question is either the child or parent table for any - ** foreign key constraint. */ - return (sqlite3FkReferences(pTab) || pTab->pFKey); - }else{ - /* This is an UPDATE. Foreign key processing is only required if the - ** operation modifies one or more child or parent key columns. */ - int i; - FKey *p; +#ifdef SQLITE_OMIT_DECLTYPE +# define sqlite3_column_decltype16 0 +# define sqlite3_column_decltype 0 +#endif - /* Check if any child key columns are being modified. */ - for(p=pTab->pFKey; p; p=p->pNextFrom){ - for(i=0; inCol; i++){ - int iChildKey = p->aCol[i].iFrom; - if( aChange[iChildKey]>=0 ) return 1; - if( iChildKey==pTab->iPKey && chngRowid ) return 1; - } - } +#ifdef SQLITE_OMIT_PROGRESS_CALLBACK +# define sqlite3_progress_handler 0 +#endif - /* Check if any parent key columns are being modified. */ - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - for(i=0; inCol; i++){ - char *zKey = p->aCol[i].zCol; - int iKey; - for(iKey=0; iKeynCol; iKey++){ - Column *pCol = &pTab->aCol[iKey]; - if( (zKey ? !sqlite3StrICmp(pCol->zName, zKey) : pCol->isPrimKey) ){ - if( aChange[iKey]>=0 ) return 1; - if( iKey==pTab->iPKey && chngRowid ) return 1; - } - } - } - } - } - } - return 0; -} +#ifdef SQLITE_OMIT_VIRTUALTABLE +# define sqlite3_create_module 0 +# define sqlite3_create_module_v2 0 +# define sqlite3_declare_vtab 0 +# define sqlite3_vtab_config 0 +# define sqlite3_vtab_on_conflict 0 +#endif + +#ifdef SQLITE_OMIT_SHARED_CACHE +# define sqlite3_enable_shared_cache 0 +#endif + +#ifdef SQLITE_OMIT_TRACE +# define sqlite3_profile 0 +# define sqlite3_trace 0 +#endif + +#ifdef SQLITE_OMIT_GET_TABLE +# define sqlite3_free_table 0 +# define sqlite3_get_table 0 +#endif + +#ifdef SQLITE_OMIT_INCRBLOB +#define sqlite3_bind_zeroblob 0 +#define sqlite3_blob_bytes 0 +#define sqlite3_blob_close 0 +#define sqlite3_blob_open 0 +#define sqlite3_blob_read 0 +#define sqlite3_blob_write 0 +#define sqlite3_blob_reopen 0 +#endif /* -** This function is called when an UPDATE or DELETE operation is being -** compiled on table pTab, which is the parent table of foreign-key pFKey. -** If the current operation is an UPDATE, then the pChanges parameter is -** passed a pointer to the list of columns being modified. If it is a -** DELETE, pChanges is passed a NULL pointer. -** -** It returns a pointer to a Trigger structure containing a trigger -** equivalent to the ON UPDATE or ON DELETE action specified by pFKey. -** If the action is "NO ACTION" or "RESTRICT", then a NULL pointer is -** returned (these actions require no special handling by the triggers -** sub-system, code for them is created by fkScanChildren()). -** -** For example, if pFKey is the foreign key and pTab is table "p" in -** the following schema: -** -** CREATE TABLE p(pk PRIMARY KEY); -** CREATE TABLE c(ck REFERENCES p ON DELETE CASCADE); -** -** then the returned trigger structure is equivalent to: +** The following structure contains pointers to all SQLite API routines. +** A pointer to this structure is passed into extensions when they are +** loaded so that the extension can make calls back into the SQLite +** library. ** -** CREATE TRIGGER ... DELETE ON p BEGIN -** DELETE FROM c WHERE ck = old.pk; -** END; +** When adding new APIs, add them to the bottom of this structure +** in order to preserve backwards compatibility. ** -** The returned pointer is cached as part of the foreign key object. It -** is eventually freed along with the rest of the foreign key object by -** sqlite3FkDelete(). +** Extensions that use newer APIs should first call the +** sqlite3_libversion_number() to make sure that the API they +** intend to use is supported by the library. Extensions should +** also check to make sure that the pointer to the function is +** not NULL before calling it. */ -static Trigger *fkActionTrigger( - Parse *pParse, /* Parse context */ - Table *pTab, /* Table being updated or deleted from */ - FKey *pFKey, /* Foreign key to get action for */ - ExprList *pChanges /* Change-list for UPDATE, NULL for DELETE */ -){ - sqlite3 *db = pParse->db; /* Database handle */ - int action; /* One of OE_None, OE_Cascade etc. */ - Trigger *pTrigger; /* Trigger definition to return */ - int iAction = (pChanges!=0); /* 1 for UPDATE, 0 for DELETE */ +static const sqlite3_api_routines sqlite3Apis = { + sqlite3_aggregate_context, +#ifndef SQLITE_OMIT_DEPRECATED + sqlite3_aggregate_count, +#else + 0, +#endif + sqlite3_bind_blob, + sqlite3_bind_double, + sqlite3_bind_int, + sqlite3_bind_int64, + sqlite3_bind_null, + sqlite3_bind_parameter_count, + sqlite3_bind_parameter_index, + sqlite3_bind_parameter_name, + sqlite3_bind_text, + sqlite3_bind_text16, + sqlite3_bind_value, + sqlite3_busy_handler, + sqlite3_busy_timeout, + sqlite3_changes, + sqlite3_close, + sqlite3_collation_needed, + sqlite3_collation_needed16, + sqlite3_column_blob, + sqlite3_column_bytes, + sqlite3_column_bytes16, + sqlite3_column_count, + sqlite3_column_database_name, + sqlite3_column_database_name16, + sqlite3_column_decltype, + sqlite3_column_decltype16, + sqlite3_column_double, + sqlite3_column_int, + sqlite3_column_int64, + sqlite3_column_name, + sqlite3_column_name16, + sqlite3_column_origin_name, + sqlite3_column_origin_name16, + sqlite3_column_table_name, + sqlite3_column_table_name16, + sqlite3_column_text, + sqlite3_column_text16, + sqlite3_column_type, + sqlite3_column_value, + sqlite3_commit_hook, + sqlite3_complete, + sqlite3_complete16, + sqlite3_create_collation, + sqlite3_create_collation16, + sqlite3_create_function, + sqlite3_create_function16, + sqlite3_create_module, + sqlite3_data_count, + sqlite3_db_handle, + sqlite3_declare_vtab, + sqlite3_enable_shared_cache, + sqlite3_errcode, + sqlite3_errmsg, + sqlite3_errmsg16, + sqlite3_exec, +#ifndef SQLITE_OMIT_DEPRECATED + sqlite3_expired, +#else + 0, +#endif + sqlite3_finalize, + sqlite3_free, + sqlite3_free_table, + sqlite3_get_autocommit, + sqlite3_get_auxdata, + sqlite3_get_table, + 0, /* Was sqlite3_global_recover(), but that function is deprecated */ + sqlite3_interrupt, + sqlite3_last_insert_rowid, + sqlite3_libversion, + sqlite3_libversion_number, + sqlite3_malloc, + sqlite3_mprintf, + sqlite3_open, + sqlite3_open16, + sqlite3_prepare, + sqlite3_prepare16, + sqlite3_profile, + sqlite3_progress_handler, + sqlite3_realloc, + sqlite3_reset, + sqlite3_result_blob, + sqlite3_result_double, + sqlite3_result_error, + sqlite3_result_error16, + sqlite3_result_int, + sqlite3_result_int64, + sqlite3_result_null, + sqlite3_result_text, + sqlite3_result_text16, + sqlite3_result_text16be, + sqlite3_result_text16le, + sqlite3_result_value, + sqlite3_rollback_hook, + sqlite3_set_authorizer, + sqlite3_set_auxdata, + sqlite3_snprintf, + sqlite3_step, + sqlite3_table_column_metadata, +#ifndef SQLITE_OMIT_DEPRECATED + sqlite3_thread_cleanup, +#else + 0, +#endif + sqlite3_total_changes, + sqlite3_trace, +#ifndef SQLITE_OMIT_DEPRECATED + sqlite3_transfer_bindings, +#else + 0, +#endif + sqlite3_update_hook, + sqlite3_user_data, + sqlite3_value_blob, + sqlite3_value_bytes, + sqlite3_value_bytes16, + sqlite3_value_double, + sqlite3_value_int, + sqlite3_value_int64, + sqlite3_value_numeric_type, + sqlite3_value_text, + sqlite3_value_text16, + sqlite3_value_text16be, + sqlite3_value_text16le, + sqlite3_value_type, + sqlite3_vmprintf, + /* + ** The original API set ends here. All extensions can call any + ** of the APIs above provided that the pointer is not NULL. But + ** before calling APIs that follow, extension should check the + ** sqlite3_libversion_number() to make sure they are dealing with + ** a library that is new enough to support that API. + ************************************************************************* + */ + sqlite3_overload_function, - action = pFKey->aAction[iAction]; - pTrigger = pFKey->apTrigger[iAction]; + /* + ** Added after 3.3.13 + */ + sqlite3_prepare_v2, + sqlite3_prepare16_v2, + sqlite3_clear_bindings, - if( action!=OE_None && !pTrigger ){ - u8 enableLookaside; /* Copy of db->lookaside.bEnabled */ - char const *zFrom; /* Name of child table */ - int nFrom; /* Length in bytes of zFrom */ - Index *pIdx = 0; /* Parent key index for this FK */ - int *aiCol = 0; /* child table cols -> parent key cols */ - TriggerStep *pStep = 0; /* First (only) step of trigger program */ - Expr *pWhere = 0; /* WHERE clause of trigger step */ - ExprList *pList = 0; /* Changes list if ON UPDATE CASCADE */ - Select *pSelect = 0; /* If RESTRICT, "SELECT RAISE(...)" */ - int i; /* Iterator variable */ - Expr *pWhen = 0; /* WHEN clause for the trigger */ + /* + ** Added for 3.4.1 + */ + sqlite3_create_module_v2, - if( locateFkeyIndex(pParse, pTab, pFKey, &pIdx, &aiCol) ) return 0; - assert( aiCol || pFKey->nCol==1 ); + /* + ** Added for 3.5.0 + */ + sqlite3_bind_zeroblob, + sqlite3_blob_bytes, + sqlite3_blob_close, + sqlite3_blob_open, + sqlite3_blob_read, + sqlite3_blob_write, + sqlite3_create_collation_v2, + sqlite3_file_control, + sqlite3_memory_highwater, + sqlite3_memory_used, +#ifdef SQLITE_MUTEX_OMIT + 0, + 0, + 0, + 0, + 0, +#else + sqlite3_mutex_alloc, + sqlite3_mutex_enter, + sqlite3_mutex_free, + sqlite3_mutex_leave, + sqlite3_mutex_try, +#endif + sqlite3_open_v2, + sqlite3_release_memory, + sqlite3_result_error_nomem, + sqlite3_result_error_toobig, + sqlite3_sleep, + sqlite3_soft_heap_limit, + sqlite3_vfs_find, + sqlite3_vfs_register, + sqlite3_vfs_unregister, - for(i=0; inCol; i++){ - Token tOld = { "old", 3 }; /* Literal "old" token */ - Token tNew = { "new", 3 }; /* Literal "new" token */ - Token tFromCol; /* Name of column in child table */ - Token tToCol; /* Name of column in parent table */ - int iFromCol; /* Idx of column in child table */ - Expr *pEq; /* tFromCol = OLD.tToCol */ + /* + ** Added for 3.5.8 + */ + sqlite3_threadsafe, + sqlite3_result_zeroblob, + sqlite3_result_error_code, + sqlite3_test_control, + sqlite3_randomness, + sqlite3_context_db_handle, - iFromCol = aiCol ? aiCol[i] : pFKey->aCol[0].iFrom; - assert( iFromCol>=0 ); - tToCol.z = pIdx ? pTab->aCol[pIdx->aiColumn[i]].zName : "oid"; - tFromCol.z = pFKey->pFrom->aCol[iFromCol].zName; + /* + ** Added for 3.6.0 + */ + sqlite3_extended_result_codes, + sqlite3_limit, + sqlite3_next_stmt, + sqlite3_sql, + sqlite3_status, - tToCol.n = sqlite3Strlen30(tToCol.z); - tFromCol.n = sqlite3Strlen30(tFromCol.z); + /* + ** Added for 3.7.4 + */ + sqlite3_backup_finish, + sqlite3_backup_init, + sqlite3_backup_pagecount, + sqlite3_backup_remaining, + sqlite3_backup_step, +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS + sqlite3_compileoption_get, + sqlite3_compileoption_used, +#else + 0, + 0, +#endif + sqlite3_create_function_v2, + sqlite3_db_config, + sqlite3_db_mutex, + sqlite3_db_status, + sqlite3_extended_errcode, + sqlite3_log, + sqlite3_soft_heap_limit64, + sqlite3_sourceid, + sqlite3_stmt_status, + sqlite3_strnicmp, +#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY + sqlite3_unlock_notify, +#else + 0, +#endif +#ifndef SQLITE_OMIT_WAL + sqlite3_wal_autocheckpoint, + sqlite3_wal_checkpoint, + sqlite3_wal_hook, +#else + 0, + 0, + 0, +#endif + sqlite3_blob_reopen, + sqlite3_vtab_config, + sqlite3_vtab_on_conflict, + sqlite3_close_v2, + sqlite3_db_filename, + sqlite3_db_readonly, + sqlite3_db_release_memory, + sqlite3_errstr, + sqlite3_stmt_busy, + sqlite3_stmt_readonly, + sqlite3_stricmp, + sqlite3_uri_boolean, + sqlite3_uri_int64, + sqlite3_uri_parameter, + sqlite3_vsnprintf, + sqlite3_wal_checkpoint_v2, + /* Version 3.8.7 and later */ + sqlite3_auto_extension, + sqlite3_bind_blob64, + sqlite3_bind_text64, + sqlite3_cancel_auto_extension, + sqlite3_load_extension, + sqlite3_malloc64, + sqlite3_msize, + sqlite3_realloc64, + sqlite3_reset_auto_extension, + sqlite3_result_blob64, + sqlite3_result_text64, + sqlite3_strglob +}; - /* Create the expression "OLD.zToCol = zFromCol". It is important - ** that the "OLD.zToCol" term is on the LHS of the = operator, so - ** that the affinity and collation sequence associated with the - ** parent table are used for the comparison. */ - pEq = sqlite3PExpr(pParse, TK_EQ, - sqlite3PExpr(pParse, TK_DOT, - sqlite3PExpr(pParse, TK_ID, 0, 0, &tOld), - sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol) - , 0), - sqlite3PExpr(pParse, TK_ID, 0, 0, &tFromCol) - , 0); - pWhere = sqlite3ExprAnd(db, pWhere, pEq); +/* +** Attempt to load an SQLite extension library contained in the file +** zFile. The entry point is zProc. zProc may be 0 in which case a +** default entry point name (sqlite3_extension_init) is used. Use +** of the default name is recommended. +** +** Return SQLITE_OK on success and SQLITE_ERROR if something goes wrong. +** +** If an error occurs and pzErrMsg is not 0, then fill *pzErrMsg with +** error message text. The calling function should free this memory +** by calling sqlite3DbFree(db, ). +*/ +static int sqlite3LoadExtension( + sqlite3 *db, /* Load the extension into this database connection */ + const char *zFile, /* Name of the shared library containing extension */ + const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */ + char **pzErrMsg /* Put error message here if not 0 */ +){ + sqlite3_vfs *pVfs = db->pVfs; + void *handle; + int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*); + char *zErrmsg = 0; + const char *zEntry; + char *zAltEntry = 0; + void **aHandle; + int nMsg = 300 + sqlite3Strlen30(zFile); + int ii; - /* For ON UPDATE, construct the next term of the WHEN clause. - ** The final WHEN clause will be like this: - ** - ** WHEN NOT(old.col1 IS new.col1 AND ... AND old.colN IS new.colN) - */ - if( pChanges ){ - pEq = sqlite3PExpr(pParse, TK_IS, - sqlite3PExpr(pParse, TK_DOT, - sqlite3PExpr(pParse, TK_ID, 0, 0, &tOld), - sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol), - 0), - sqlite3PExpr(pParse, TK_DOT, - sqlite3PExpr(pParse, TK_ID, 0, 0, &tNew), - sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol), - 0), - 0); - pWhen = sqlite3ExprAnd(db, pWhen, pEq); - } - - if( action!=OE_Restrict && (action!=OE_Cascade || pChanges) ){ - Expr *pNew; - if( action==OE_Cascade ){ - pNew = sqlite3PExpr(pParse, TK_DOT, - sqlite3PExpr(pParse, TK_ID, 0, 0, &tNew), - sqlite3PExpr(pParse, TK_ID, 0, 0, &tToCol) - , 0); - }else if( action==OE_SetDflt ){ - Expr *pDflt = pFKey->pFrom->aCol[iFromCol].pDflt; - if( pDflt ){ - pNew = sqlite3ExprDup(db, pDflt, 0); - }else{ - pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0); - } - }else{ - pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0); - } - pList = sqlite3ExprListAppend(pParse, pList, pNew); - sqlite3ExprListSetName(pParse, pList, &tFromCol, 0); - } - } - sqlite3DbFree(db, aiCol); + /* Shared library endings to try if zFile cannot be loaded as written */ + static const char *azEndings[] = { +#if SQLITE_OS_WIN + "dll" +#elif defined(__APPLE__) + "dylib" +#else + "so" +#endif + }; - zFrom = pFKey->pFrom->zName; - nFrom = sqlite3Strlen30(zFrom); - if( action==OE_Restrict ){ - Token tFrom; - Expr *pRaise; + if( pzErrMsg ) *pzErrMsg = 0; - tFrom.z = zFrom; - tFrom.n = nFrom; - pRaise = sqlite3Expr(db, TK_RAISE, "foreign key constraint failed"); - if( pRaise ){ - pRaise->affinity = OE_Abort; - } - pSelect = sqlite3SelectNew(pParse, - sqlite3ExprListAppend(pParse, 0, pRaise), - sqlite3SrcListAppend(db, 0, &tFrom, 0), - pWhere, - 0, 0, 0, 0, 0, 0 - ); - pWhere = 0; + /* Ticket #1863. To avoid a creating security problems for older + ** applications that relink against newer versions of SQLite, the + ** ability to run load_extension is turned off by default. One + ** must call sqlite3_enable_load_extension() to turn on extension + ** loading. Otherwise you get the following error. + */ + if( (db->flags & SQLITE_LoadExtension)==0 ){ + if( pzErrMsg ){ + *pzErrMsg = sqlite3_mprintf("not authorized"); } + return SQLITE_ERROR; + } - /* Disable lookaside memory allocation */ - enableLookaside = db->lookaside.bEnabled; - db->lookaside.bEnabled = 0; + zEntry = zProc ? zProc : "sqlite3_extension_init"; - pTrigger = (Trigger *)sqlite3DbMallocZero(db, - sizeof(Trigger) + /* struct Trigger */ - sizeof(TriggerStep) + /* Single step in trigger program */ - nFrom + 1 /* Space for pStep->target.z */ - ); - if( pTrigger ){ - pStep = pTrigger->step_list = (TriggerStep *)&pTrigger[1]; - pStep->target.z = (char *)&pStep[1]; - pStep->target.n = nFrom; - memcpy((char *)pStep->target.z, zFrom, nFrom); - - pStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); - pStep->pExprList = sqlite3ExprListDup(db, pList, EXPRDUP_REDUCE); - pStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); - if( pWhen ){ - pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0, 0); - pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); + handle = sqlite3OsDlOpen(pVfs, zFile); +#if SQLITE_OS_UNIX || SQLITE_OS_WIN + for(ii=0; iilookaside.bEnabled = enableLookaside; - - sqlite3ExprDelete(db, pWhere); - sqlite3ExprDelete(db, pWhen); - sqlite3ExprListDelete(db, pList); - sqlite3SelectDelete(db, pSelect); - if( db->mallocFailed==1 ){ - fkTriggerDelete(db, pTrigger); - return 0; + return SQLITE_ERROR; + } + xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*)) + sqlite3OsDlSym(pVfs, handle, zEntry); + + /* If no entry point was specified and the default legacy + ** entry point name "sqlite3_extension_init" was not found, then + ** construct an entry point name "sqlite3_X_init" where the X is + ** replaced by the lowercase value of every ASCII alphabetic + ** character in the filename after the last "/" upto the first ".", + ** and eliding the first three characters if they are "lib". + ** Examples: + ** + ** /usr/local/lib/libExample5.4.3.so ==> sqlite3_example_init + ** C:/lib/mathfuncs.dll ==> sqlite3_mathfuncs_init + */ + if( xInit==0 && zProc==0 ){ + int iFile, iEntry, c; + int ncFile = sqlite3Strlen30(zFile); + zAltEntry = sqlite3_malloc(ncFile+30); + if( zAltEntry==0 ){ + sqlite3OsDlClose(pVfs, handle); + return SQLITE_NOMEM; } - - switch( action ){ - case OE_Restrict: - pStep->op = TK_SELECT; - break; - case OE_Cascade: - if( !pChanges ){ - pStep->op = TK_DELETE; - break; - } - default: - pStep->op = TK_UPDATE; + memcpy(zAltEntry, "sqlite3_", 8); + for(iFile=ncFile-1; iFile>=0 && zFile[iFile]!='/'; iFile--){} + iFile++; + if( sqlite3_strnicmp(zFile+iFile, "lib", 3)==0 ) iFile += 3; + for(iEntry=8; (c = zFile[iFile])!=0 && c!='.'; iFile++){ + if( sqlite3Isalpha(c) ){ + zAltEntry[iEntry++] = (char)sqlite3UpperToLower[(unsigned)c]; + } } - pStep->pTrig = pTrigger; - pTrigger->pSchema = pTab->pSchema; - pTrigger->pTabSchema = pTab->pSchema; - pFKey->apTrigger[iAction] = pTrigger; - pTrigger->op = (pChanges ? TK_UPDATE : TK_DELETE); + memcpy(zAltEntry+iEntry, "_init", 6); + zEntry = zAltEntry; + xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*)) + sqlite3OsDlSym(pVfs, handle, zEntry); + } + if( xInit==0 ){ + if( pzErrMsg ){ + nMsg += sqlite3Strlen30(zEntry); + *pzErrMsg = zErrmsg = sqlite3_malloc(nMsg); + if( zErrmsg ){ + sqlite3_snprintf(nMsg, zErrmsg, + "no entry point [%s] in shared library [%s]", zEntry, zFile); + sqlite3OsDlError(pVfs, nMsg-1, zErrmsg); + } + } + sqlite3OsDlClose(pVfs, handle); + sqlite3_free(zAltEntry); + return SQLITE_ERROR; + } + sqlite3_free(zAltEntry); + if( xInit(db, &zErrmsg, &sqlite3Apis) ){ + if( pzErrMsg ){ + *pzErrMsg = sqlite3_mprintf("error during initialization: %s", zErrmsg); + } + sqlite3_free(zErrmsg); + sqlite3OsDlClose(pVfs, handle); + return SQLITE_ERROR; } - return pTrigger; + /* Append the new shared library handle to the db->aExtension array. */ + aHandle = sqlite3DbMallocZero(db, sizeof(handle)*(db->nExtension+1)); + if( aHandle==0 ){ + return SQLITE_NOMEM; + } + if( db->nExtension>0 ){ + memcpy(aHandle, db->aExtension, sizeof(handle)*db->nExtension); + } + sqlite3DbFree(db, db->aExtension); + db->aExtension = aHandle; + + db->aExtension[db->nExtension++] = handle; + return SQLITE_OK; +} +SQLITE_API int sqlite3_load_extension( + sqlite3 *db, /* Load the extension into this database connection */ + const char *zFile, /* Name of the shared library containing extension */ + const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */ + char **pzErrMsg /* Put error message here if not 0 */ +){ + int rc; + sqlite3_mutex_enter(db->mutex); + rc = sqlite3LoadExtension(db, zFile, zProc, pzErrMsg); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; } /* -** This function is called when deleting or updating a row to implement -** any required CASCADE, SET NULL or SET DEFAULT actions. +** Call this routine when the database connection is closing in order +** to clean up loaded extensions */ -SQLITE_PRIVATE void sqlite3FkActions( - Parse *pParse, /* Parse context */ - Table *pTab, /* Table being updated or deleted from */ - ExprList *pChanges, /* Change-list for UPDATE, NULL for DELETE */ - int regOld /* Address of array containing old row */ -){ - /* If foreign-key support is enabled, iterate through all FKs that - ** refer to table pTab. If there is an action associated with the FK - ** for this operation (either update or delete), invoke the associated - ** trigger sub-program. */ - if( pParse->db->flags&SQLITE_ForeignKeys ){ - FKey *pFKey; /* Iterator variable */ - for(pFKey = sqlite3FkReferences(pTab); pFKey; pFKey=pFKey->pNextTo){ - Trigger *pAction = fkActionTrigger(pParse, pTab, pFKey, pChanges); - if( pAction ){ - sqlite3CodeRowTriggerDirect(pParse, pAction, pTab, regOld, OE_Abort, 0); - } - } +SQLITE_PRIVATE void sqlite3CloseExtensions(sqlite3 *db){ + int i; + assert( sqlite3_mutex_held(db->mutex) ); + for(i=0; inExtension; i++){ + sqlite3OsDlClose(db->pVfs, db->aExtension[i]); } + sqlite3DbFree(db, db->aExtension); } -#endif /* ifndef SQLITE_OMIT_TRIGGER */ +/* +** Enable or disable extension loading. Extension loading is disabled by +** default so as not to open security holes in older applications. +*/ +SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff){ + sqlite3_mutex_enter(db->mutex); + if( onoff ){ + db->flags |= SQLITE_LoadExtension; + }else{ + db->flags &= ~SQLITE_LoadExtension; + } + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +#endif /* SQLITE_OMIT_LOAD_EXTENSION */ /* -** Free all memory associated with foreign key definitions attached to -** table pTab. Remove the deleted foreign keys from the Schema.fkeyHash -** hash table. +** The auto-extension code added regardless of whether or not extension +** loading is supported. We need a dummy sqlite3Apis pointer for that +** code if regular extension loading is not available. This is that +** dummy pointer. */ -SQLITE_PRIVATE void sqlite3FkDelete(sqlite3 *db, Table *pTab){ - FKey *pFKey; /* Iterator variable */ - FKey *pNext; /* Copy of pFKey->pNextFrom */ +#ifdef SQLITE_OMIT_LOAD_EXTENSION +static const sqlite3_api_routines sqlite3Apis = { 0 }; +#endif - assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pTab->pSchema) ); - for(pFKey=pTab->pFKey; pFKey; pFKey=pNext){ - /* Remove the FK from the fkeyHash hash table. */ - if( !db || db->pnBytesFreed==0 ){ - if( pFKey->pPrevTo ){ - pFKey->pPrevTo->pNextTo = pFKey->pNextTo; +/* +** The following object holds the list of automatically loaded +** extensions. +** +** This list is shared across threads. The SQLITE_MUTEX_STATIC_MASTER +** mutex must be held while accessing this list. +*/ +typedef struct sqlite3AutoExtList sqlite3AutoExtList; +static SQLITE_WSD struct sqlite3AutoExtList { + int nExt; /* Number of entries in aExt[] */ + void (**aExt)(void); /* Pointers to the extension init functions */ +} sqlite3Autoext = { 0, 0 }; + +/* The "wsdAutoext" macro will resolve to the autoextension +** state vector. If writable static data is unsupported on the target, +** we have to locate the state vector at run-time. In the more common +** case where writable static data is supported, wsdStat can refer directly +** to the "sqlite3Autoext" state vector declared above. +*/ +#ifdef SQLITE_OMIT_WSD +# define wsdAutoextInit \ + sqlite3AutoExtList *x = &GLOBAL(sqlite3AutoExtList,sqlite3Autoext) +# define wsdAutoext x[0] +#else +# define wsdAutoextInit +# define wsdAutoext sqlite3Autoext +#endif + + +/* +** Register a statically linked extension that is automatically +** loaded by every new database connection. +*/ +SQLITE_API int sqlite3_auto_extension(void (*xInit)(void)){ + int rc = SQLITE_OK; +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); + if( rc ){ + return rc; + }else +#endif + { + int i; +#if SQLITE_THREADSAFE + sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); +#endif + wsdAutoextInit; + sqlite3_mutex_enter(mutex); + for(i=0; ipNextTo; - const char *z = (p ? pFKey->pNextTo->zTo : pFKey->zTo); - sqlite3HashInsert(&pTab->pSchema->fkeyHash, z, sqlite3Strlen30(z), p); - } - if( pFKey->pNextTo ){ - pFKey->pNextTo->pPrevTo = pFKey->pPrevTo; + wsdAutoext.aExt = aNew; + wsdAutoext.aExt[wsdAutoext.nExt] = xInit; + wsdAutoext.nExt++; } } + sqlite3_mutex_leave(mutex); + assert( (rc&0xff)==rc ); + return rc; + } +} - /* EV: R-30323-21917 Each foreign key constraint in SQLite is - ** classified as either immediate or deferred. - */ - assert( pFKey->isDeferred==0 || pFKey->isDeferred==1 ); +/* +** Cancel a prior call to sqlite3_auto_extension. Remove xInit from the +** set of routines that is invoked for each new database connection, if it +** is currently on the list. If xInit is not on the list, then this +** routine is a no-op. +** +** Return 1 if xInit was found on the list and removed. Return 0 if xInit +** was not on the list. +*/ +SQLITE_API int sqlite3_cancel_auto_extension(void (*xInit)(void)){ +#if SQLITE_THREADSAFE + sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); +#endif + int i; + int n = 0; + wsdAutoextInit; + sqlite3_mutex_enter(mutex); + for(i=wsdAutoext.nExt-1; i>=0; i--){ + if( wsdAutoext.aExt[i]==xInit ){ + wsdAutoext.nExt--; + wsdAutoext.aExt[i] = wsdAutoext.aExt[wsdAutoext.nExt]; + n++; + break; + } + } + sqlite3_mutex_leave(mutex); + return n; +} - /* Delete any triggers created to implement actions for this FK. */ -#ifndef SQLITE_OMIT_TRIGGER - fkTriggerDelete(db, pFKey->apTrigger[0]); - fkTriggerDelete(db, pFKey->apTrigger[1]); +/* +** Reset the automatic extension loading mechanism. +*/ +SQLITE_API void sqlite3_reset_auto_extension(void){ +#ifndef SQLITE_OMIT_AUTOINIT + if( sqlite3_initialize()==SQLITE_OK ) #endif + { +#if SQLITE_THREADSAFE + sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); +#endif + wsdAutoextInit; + sqlite3_mutex_enter(mutex); + sqlite3_free(wsdAutoext.aExt); + wsdAutoext.aExt = 0; + wsdAutoext.nExt = 0; + sqlite3_mutex_leave(mutex); + } +} - pNext = pFKey->pNextFrom; - sqlite3DbFree(db, pFKey); +/* +** Load all automatic extensions. +** +** If anything goes wrong, set an error in the database connection. +*/ +SQLITE_PRIVATE void sqlite3AutoLoadExtensions(sqlite3 *db){ + int i; + int go = 1; + int rc; + int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*); + + wsdAutoextInit; + if( wsdAutoext.nExt==0 ){ + /* Common case: early out without every having to acquire a mutex */ + return; + } + for(i=0; go; i++){ + char *zErrmsg; +#if SQLITE_THREADSAFE + sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); +#endif + sqlite3_mutex_enter(mutex); + if( i>=wsdAutoext.nExt ){ + xInit = 0; + go = 0; + }else{ + xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*)) + wsdAutoext.aExt[i]; + } + sqlite3_mutex_leave(mutex); + zErrmsg = 0; + if( xInit && (rc = xInit(db, &zErrmsg, &sqlite3Apis))!=0 ){ + sqlite3ErrorWithMsg(db, rc, + "automatic extension loading failed: %s", zErrmsg); + go = 0; + } + sqlite3_free(zErrmsg); } } -#endif /* ifndef SQLITE_OMIT_FOREIGN_KEY */ -/************** End of fkey.c ************************************************/ -/************** Begin file insert.c ******************************************/ +/************** End of loadext.c *********************************************/ +/************** Begin file pragma.c ******************************************/ /* -** 2001 September 15 +** 2003 April 6 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -85022,2009 +100798,3277 @@ SQLITE_PRIVATE void sqlite3FkDelete(sqlite3 *db, Table *pTab){ ** May you share freely, never taking more than you give. ** ************************************************************************* -** This file contains C code routines that are called by the parser -** to handle INSERT statements in SQLite. +** This file contains code used to implement the PRAGMA command. */ -/* -** Generate code that will open a table for reading. -*/ -SQLITE_PRIVATE void sqlite3OpenTable( - Parse *p, /* Generate code into this VDBE */ - int iCur, /* The cursor number of the table */ - int iDb, /* The database index in sqlite3.aDb[] */ - Table *pTab, /* The table to be opened */ - int opcode /* OP_OpenRead or OP_OpenWrite */ -){ - Vdbe *v; - if( IsVirtual(pTab) ) return; - v = sqlite3GetVdbe(p); - assert( opcode==OP_OpenWrite || opcode==OP_OpenRead ); - sqlite3TableLock(p, iDb, pTab->tnum, (opcode==OP_OpenWrite)?1:0, pTab->zName); - sqlite3VdbeAddOp3(v, opcode, iCur, pTab->tnum, iDb); - sqlite3VdbeChangeP4(v, -1, SQLITE_INT_TO_PTR(pTab->nCol), P4_INT32); - VdbeComment((v, "%s", pTab->zName)); -} +#if !defined(SQLITE_ENABLE_LOCKING_STYLE) +# if defined(__APPLE__) +# define SQLITE_ENABLE_LOCKING_STYLE 1 +# else +# define SQLITE_ENABLE_LOCKING_STYLE 0 +# endif +#endif + +/*************************************************************************** +** The next block of code, including the PragTyp_XXXX macro definitions and +** the aPragmaName[] object is composed of generated code. DO NOT EDIT. +** +** To add new pragmas, edit the code in ../tool/mkpragmatab.tcl and rerun +** that script. Then copy/paste the output in place of the following: +*/ +#define PragTyp_HEADER_VALUE 0 +#define PragTyp_AUTO_VACUUM 1 +#define PragTyp_FLAG 2 +#define PragTyp_BUSY_TIMEOUT 3 +#define PragTyp_CACHE_SIZE 4 +#define PragTyp_CASE_SENSITIVE_LIKE 5 +#define PragTyp_COLLATION_LIST 6 +#define PragTyp_COMPILE_OPTIONS 7 +#define PragTyp_DATA_STORE_DIRECTORY 8 +#define PragTyp_DATABASE_LIST 9 +#define PragTyp_DEFAULT_CACHE_SIZE 10 +#define PragTyp_ENCODING 11 +#define PragTyp_FOREIGN_KEY_CHECK 12 +#define PragTyp_FOREIGN_KEY_LIST 13 +#define PragTyp_INCREMENTAL_VACUUM 14 +#define PragTyp_INDEX_INFO 15 +#define PragTyp_INDEX_LIST 16 +#define PragTyp_INTEGRITY_CHECK 17 +#define PragTyp_JOURNAL_MODE 18 +#define PragTyp_JOURNAL_SIZE_LIMIT 19 +#define PragTyp_LOCK_PROXY_FILE 20 +#define PragTyp_LOCKING_MODE 21 +#define PragTyp_PAGE_COUNT 22 +#define PragTyp_MMAP_SIZE 23 +#define PragTyp_PAGE_SIZE 24 +#define PragTyp_SECURE_DELETE 25 +#define PragTyp_SHRINK_MEMORY 26 +#define PragTyp_SOFT_HEAP_LIMIT 27 +#define PragTyp_STATS 28 +#define PragTyp_SYNCHRONOUS 29 +#define PragTyp_TABLE_INFO 30 +#define PragTyp_TEMP_STORE 31 +#define PragTyp_TEMP_STORE_DIRECTORY 32 +#define PragTyp_THREADS 33 +#define PragTyp_WAL_AUTOCHECKPOINT 34 +#define PragTyp_WAL_CHECKPOINT 35 +#define PragTyp_ACTIVATE_EXTENSIONS 36 +#define PragTyp_HEXKEY 37 +#define PragTyp_KEY 38 +#define PragTyp_REKEY 39 +#define PragTyp_LOCK_STATUS 40 +#define PragTyp_PARSER_TRACE 41 +#define PragFlag_NeedSchema 0x01 +static const struct sPragmaNames { + const char *const zName; /* Name of pragma */ + u8 ePragTyp; /* PragTyp_XXX value */ + u8 mPragFlag; /* Zero or more PragFlag_XXX values */ + u32 iArg; /* Extra argument */ +} aPragmaNames[] = { +#if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD) + { /* zName: */ "activate_extensions", + /* ePragTyp: */ PragTyp_ACTIVATE_EXTENSIONS, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) + { /* zName: */ "application_id", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_AUTOVACUUM) + { /* zName: */ "auto_vacuum", + /* ePragTyp: */ PragTyp_AUTO_VACUUM, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if !defined(SQLITE_OMIT_AUTOMATIC_INDEX) + { /* zName: */ "automatic_index", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_AutoIndex }, +#endif +#endif + { /* zName: */ "busy_timeout", + /* ePragTyp: */ PragTyp_BUSY_TIMEOUT, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "cache_size", + /* ePragTyp: */ PragTyp_CACHE_SIZE, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "cache_spill", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_CacheSpill }, +#endif + { /* zName: */ "case_sensitive_like", + /* ePragTyp: */ PragTyp_CASE_SENSITIVE_LIKE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "checkpoint_fullfsync", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_CkptFullFSync }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) + { /* zName: */ "collation_list", + /* ePragTyp: */ PragTyp_COLLATION_LIST, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS) + { /* zName: */ "compile_options", + /* ePragTyp: */ PragTyp_COMPILE_OPTIONS, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "count_changes", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_CountRows }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_OS_WIN + { /* zName: */ "data_store_directory", + /* ePragTyp: */ PragTyp_DATA_STORE_DIRECTORY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) + { /* zName: */ "database_list", + /* ePragTyp: */ PragTyp_DATABASE_LIST, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED) + { /* zName: */ "default_cache_size", + /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + { /* zName: */ "defer_foreign_keys", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_DeferFKs }, +#endif +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "empty_result_callbacks", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_NullCallback }, +#endif +#if !defined(SQLITE_OMIT_UTF16) + { /* zName: */ "encoding", + /* ePragTyp: */ PragTyp_ENCODING, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + { /* zName: */ "foreign_key_check", + /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FOREIGN_KEY) + { /* zName: */ "foreign_key_list", + /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) + { /* zName: */ "foreign_keys", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_ForeignKeys }, +#endif +#endif +#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) + { /* zName: */ "freelist_count", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "full_column_names", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_FullColNames }, + { /* zName: */ "fullfsync", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_FullFSync }, +#endif +#if defined(SQLITE_HAS_CODEC) + { /* zName: */ "hexkey", + /* ePragTyp: */ PragTyp_HEXKEY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "hexrekey", + /* ePragTyp: */ PragTyp_HEXKEY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if !defined(SQLITE_OMIT_CHECK) + { /* zName: */ "ignore_check_constraints", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_IgnoreChecks }, +#endif +#endif +#if !defined(SQLITE_OMIT_AUTOVACUUM) + { /* zName: */ "incremental_vacuum", + /* ePragTyp: */ PragTyp_INCREMENTAL_VACUUM, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) + { /* zName: */ "index_info", + /* ePragTyp: */ PragTyp_INDEX_INFO, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, + { /* zName: */ "index_list", + /* ePragTyp: */ PragTyp_INDEX_LIST, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_INTEGRITY_CHECK) + { /* zName: */ "integrity_check", + /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "journal_mode", + /* ePragTyp: */ PragTyp_JOURNAL_MODE, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, + { /* zName: */ "journal_size_limit", + /* ePragTyp: */ PragTyp_JOURNAL_SIZE_LIMIT, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if defined(SQLITE_HAS_CODEC) + { /* zName: */ "key", + /* ePragTyp: */ PragTyp_KEY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "legacy_file_format", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_LegacyFileFmt }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_ENABLE_LOCKING_STYLE + { /* zName: */ "lock_proxy_file", + /* ePragTyp: */ PragTyp_LOCK_PROXY_FILE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) + { /* zName: */ "lock_status", + /* ePragTyp: */ PragTyp_LOCK_STATUS, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "locking_mode", + /* ePragTyp: */ PragTyp_LOCKING_MODE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "max_page_count", + /* ePragTyp: */ PragTyp_PAGE_COUNT, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, + { /* zName: */ "mmap_size", + /* ePragTyp: */ PragTyp_MMAP_SIZE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "page_count", + /* ePragTyp: */ PragTyp_PAGE_COUNT, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, + { /* zName: */ "page_size", + /* ePragTyp: */ PragTyp_PAGE_SIZE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if defined(SQLITE_DEBUG) + { /* zName: */ "parser_trace", + /* ePragTyp: */ PragTyp_PARSER_TRACE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "query_only", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_QueryOnly }, +#endif +#if !defined(SQLITE_OMIT_INTEGRITY_CHECK) + { /* zName: */ "quick_check", + /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "read_uncommitted", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_ReadUncommitted }, + { /* zName: */ "recursive_triggers", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_RecTriggers }, +#endif +#if defined(SQLITE_HAS_CODEC) + { /* zName: */ "rekey", + /* ePragTyp: */ PragTyp_REKEY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "reverse_unordered_selects", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_ReverseOrder }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) + { /* zName: */ "schema_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "secure_delete", + /* ePragTyp: */ PragTyp_SECURE_DELETE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "short_column_names", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_ShortColNames }, +#endif + { /* zName: */ "shrink_memory", + /* ePragTyp: */ PragTyp_SHRINK_MEMORY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "soft_heap_limit", + /* ePragTyp: */ PragTyp_SOFT_HEAP_LIMIT, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if defined(SQLITE_DEBUG) + { /* zName: */ "sql_trace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_SqlTrace }, +#endif +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) + { /* zName: */ "stats", + /* ePragTyp: */ PragTyp_STATS, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "synchronous", + /* ePragTyp: */ PragTyp_SYNCHRONOUS, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) + { /* zName: */ "table_info", + /* ePragTyp: */ PragTyp_TABLE_INFO, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + { /* zName: */ "temp_store", + /* ePragTyp: */ PragTyp_TEMP_STORE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "temp_store_directory", + /* ePragTyp: */ PragTyp_TEMP_STORE_DIRECTORY, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif + { /* zName: */ "threads", + /* ePragTyp: */ PragTyp_THREADS, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) + { /* zName: */ "user_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) +#if defined(SQLITE_DEBUG) + { /* zName: */ "vdbe_addoptrace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_VdbeAddopTrace }, + { /* zName: */ "vdbe_debug", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_SqlTrace|SQLITE_VdbeListing|SQLITE_VdbeTrace }, + { /* zName: */ "vdbe_eqp", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_VdbeEQP }, + { /* zName: */ "vdbe_listing", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_VdbeListing }, + { /* zName: */ "vdbe_trace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_VdbeTrace }, +#endif +#endif +#if !defined(SQLITE_OMIT_WAL) + { /* zName: */ "wal_autocheckpoint", + /* ePragTyp: */ PragTyp_WAL_AUTOCHECKPOINT, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, + { /* zName: */ "wal_checkpoint", + /* ePragTyp: */ PragTyp_WAL_CHECKPOINT, + /* ePragFlag: */ PragFlag_NeedSchema, + /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + { /* zName: */ "writable_schema", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlag: */ 0, + /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode }, +#endif +}; +/* Number of pragmas: 57 on by default, 70 total. */ +/* End of the automatically generated pragma table. +***************************************************************************/ /* -** Return a pointer to the column affinity string associated with index -** pIdx. A column affinity string has one character for each column in -** the table, according to the affinity of the column: -** -** Character Column affinity -** ------------------------------ -** 'a' TEXT -** 'b' NONE -** 'c' NUMERIC -** 'd' INTEGER -** 'e' REAL -** -** An extra 'b' is appended to the end of the string to cover the -** rowid that appears as the last column in every index. +** Interpret the given string as a safety level. Return 0 for OFF, +** 1 for ON or NORMAL and 2 for FULL. Return 1 for an empty or +** unrecognized string argument. The FULL option is disallowed +** if the omitFull parameter it 1. ** -** Memory for the buffer containing the column index affinity string -** is managed along with the rest of the Index structure. It will be -** released when sqlite3DeleteIndex() is called. +** Note that the values returned are one less that the values that +** should be passed into sqlite3BtreeSetSafetyLevel(). The is done +** to support legacy SQL code. The safety level used to be boolean +** and older scripts may have used numbers 0 for OFF and 1 for ON. */ -SQLITE_PRIVATE const char *sqlite3IndexAffinityStr(Vdbe *v, Index *pIdx){ - if( !pIdx->zColAff ){ - /* The first time a column affinity string for a particular index is - ** required, it is allocated and populated here. It is then stored as - ** a member of the Index structure for subsequent use. - ** - ** The column affinity string will eventually be deleted by - ** sqliteDeleteIndex() when the Index structure itself is cleaned - ** up. - */ - int n; - Table *pTab = pIdx->pTable; - sqlite3 *db = sqlite3VdbeDb(v); - pIdx->zColAff = (char *)sqlite3DbMallocRaw(0, pIdx->nColumn+2); - if( !pIdx->zColAff ){ - db->mallocFailed = 1; - return 0; - } - for(n=0; nnColumn; n++){ - pIdx->zColAff[n] = pTab->aCol[pIdx->aiColumn[n]].affinity; +static u8 getSafetyLevel(const char *z, int omitFull, u8 dflt){ + /* 123456789 123456789 */ + static const char zText[] = "onoffalseyestruefull"; + static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16}; + static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 4}; + static const u8 iValue[] = {1, 0, 0, 0, 1, 1, 2}; + int i, n; + if( sqlite3Isdigit(*z) ){ + return (u8)sqlite3Atoi(z); + } + n = sqlite3Strlen30(z); + for(i=0; izColAff[n++] = SQLITE_AFF_NONE; - pIdx->zColAff[n] = 0; } - - return pIdx->zColAff; + return dflt; } /* -** Set P4 of the most recently inserted opcode to a column affinity -** string for table pTab. A column affinity string has one character -** for each column indexed by the index, according to the affinity of the -** column: -** -** Character Column affinity -** ------------------------------ -** 'a' TEXT -** 'b' NONE -** 'c' NUMERIC -** 'd' INTEGER -** 'e' REAL -*/ -SQLITE_PRIVATE void sqlite3TableAffinityStr(Vdbe *v, Table *pTab){ - /* The first time a column affinity string for a particular table - ** is required, it is allocated and populated here. It is then - ** stored as a member of the Table structure for subsequent use. - ** - ** The column affinity string will eventually be deleted by - ** sqlite3DeleteTable() when the Table structure itself is cleaned up. - */ - if( !pTab->zColAff ){ - char *zColAff; - int i; - sqlite3 *db = sqlite3VdbeDb(v); - - zColAff = (char *)sqlite3DbMallocRaw(0, pTab->nCol+1); - if( !zColAff ){ - db->mallocFailed = 1; - return; - } +** Interpret the given string as a boolean value. +*/ +SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, u8 dflt){ + return getSafetyLevel(z,1,dflt)!=0; +} - for(i=0; inCol; i++){ - zColAff[i] = pTab->aCol[i].affinity; - } - zColAff[pTab->nCol] = '\0'; +/* The sqlite3GetBoolean() function is used by other modules but the +** remainder of this file is specific to PRAGMA processing. So omit +** the rest of the file if PRAGMAs are omitted from the build. +*/ +#if !defined(SQLITE_OMIT_PRAGMA) - pTab->zColAff = zColAff; +/* +** Interpret the given string as a locking mode value. +*/ +static int getLockingMode(const char *z){ + if( z ){ + if( 0==sqlite3StrICmp(z, "exclusive") ) return PAGER_LOCKINGMODE_EXCLUSIVE; + if( 0==sqlite3StrICmp(z, "normal") ) return PAGER_LOCKINGMODE_NORMAL; } - - sqlite3VdbeChangeP4(v, -1, pTab->zColAff, P4_TRANSIENT); + return PAGER_LOCKINGMODE_QUERY; } +#ifndef SQLITE_OMIT_AUTOVACUUM /* -** Return non-zero if the table pTab in database iDb or any of its indices -** have been opened at any point in the VDBE program beginning at location -** iStartAddr throught the end of the program. This is used to see if -** a statement of the form "INSERT INTO SELECT ..." can -** run without using temporary table for the results of the SELECT. +** Interpret the given string as an auto-vacuum mode value. +** +** The following strings, "none", "full" and "incremental" are +** acceptable, as are their numeric equivalents: 0, 1 and 2 respectively. */ -static int readsTable(Parse *p, int iStartAddr, int iDb, Table *pTab){ - Vdbe *v = sqlite3GetVdbe(p); +static int getAutoVacuum(const char *z){ int i; - int iEnd = sqlite3VdbeCurrentAddr(v); -#ifndef SQLITE_OMIT_VIRTUALTABLE - VTable *pVTab = IsVirtual(pTab) ? sqlite3GetVTable(p->db, pTab) : 0; -#endif + if( 0==sqlite3StrICmp(z, "none") ) return BTREE_AUTOVACUUM_NONE; + if( 0==sqlite3StrICmp(z, "full") ) return BTREE_AUTOVACUUM_FULL; + if( 0==sqlite3StrICmp(z, "incremental") ) return BTREE_AUTOVACUUM_INCR; + i = sqlite3Atoi(z); + return (u8)((i>=0&&i<=2)?i:0); +} +#endif /* ifndef SQLITE_OMIT_AUTOVACUUM */ - for(i=iStartAddr; iopcode==OP_OpenRead && pOp->p3==iDb ){ - Index *pIndex; - int tnum = pOp->p2; - if( tnum==pTab->tnum ){ - return 1; - } - for(pIndex=pTab->pIndex; pIndex; pIndex=pIndex->pNext){ - if( tnum==pIndex->tnum ){ - return 1; - } - } - } -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( pOp->opcode==OP_VOpen && pOp->p4.pVtab==pVTab ){ - assert( pOp->p4.pVtab!=0 ); - assert( pOp->p4type==P4_VTAB ); - return 1; - } -#endif +#ifndef SQLITE_OMIT_PAGER_PRAGMAS +/* +** Interpret the given string as a temp db location. Return 1 for file +** backed temporary databases, 2 for the Red-Black tree in memory database +** and 0 to use the compile-time default. +*/ +static int getTempStore(const char *z){ + if( z[0]>='0' && z[0]<='2' ){ + return z[0] - '0'; + }else if( sqlite3StrICmp(z, "file")==0 ){ + return 1; + }else if( sqlite3StrICmp(z, "memory")==0 ){ + return 2; + }else{ + return 0; } - return 0; } +#endif /* SQLITE_PAGER_PRAGMAS */ -#ifndef SQLITE_OMIT_AUTOINCREMENT +#ifndef SQLITE_OMIT_PAGER_PRAGMAS /* -** Locate or create an AutoincInfo structure associated with table pTab -** which is in database iDb. Return the register number for the register -** that holds the maximum rowid. -** -** There is at most one AutoincInfo structure per table even if the -** same table is autoincremented multiple times due to inserts within -** triggers. A new AutoincInfo structure is created if this is the -** first use of table pTab. On 2nd and subsequent uses, the original -** AutoincInfo structure is used. -** -** Three memory locations are allocated: -** -** (1) Register to hold the name of the pTab table. -** (2) Register to hold the maximum ROWID of pTab. -** (3) Register to hold the rowid in sqlite_sequence of pTab -** -** The 2nd register is the one that is returned. That is all the -** insert routine needs to know about. +** Invalidate temp storage, either when the temp storage is changed +** from default, or when 'file' and the temp_store_directory has changed */ -static int autoIncBegin( - Parse *pParse, /* Parsing context */ - int iDb, /* Index of the database holding pTab */ - Table *pTab /* The table we are writing to */ -){ - int memId = 0; /* Register holding maximum rowid */ - if( pTab->tabFlags & TF_Autoincrement ){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - AutoincInfo *pInfo; - - pInfo = pToplevel->pAinc; - while( pInfo && pInfo->pTab!=pTab ){ pInfo = pInfo->pNext; } - if( pInfo==0 ){ - pInfo = sqlite3DbMallocRaw(pParse->db, sizeof(*pInfo)); - if( pInfo==0 ) return 0; - pInfo->pNext = pToplevel->pAinc; - pToplevel->pAinc = pInfo; - pInfo->pTab = pTab; - pInfo->iDb = iDb; - pToplevel->nMem++; /* Register to hold name of table */ - pInfo->regCtr = ++pToplevel->nMem; /* Max rowid register */ - pToplevel->nMem++; /* Rowid in sqlite_sequence */ +static int invalidateTempStorage(Parse *pParse){ + sqlite3 *db = pParse->db; + if( db->aDb[1].pBt!=0 ){ + if( !db->autoCommit || sqlite3BtreeIsInReadTrans(db->aDb[1].pBt) ){ + sqlite3ErrorMsg(pParse, "temporary storage cannot be changed " + "from within a transaction"); + return SQLITE_ERROR; } - memId = pInfo->regCtr; + sqlite3BtreeClose(db->aDb[1].pBt); + db->aDb[1].pBt = 0; + sqlite3ResetAllSchemasOfConnection(db); } - return memId; + return SQLITE_OK; } +#endif /* SQLITE_PAGER_PRAGMAS */ +#ifndef SQLITE_OMIT_PAGER_PRAGMAS /* -** This routine generates code that will initialize all of the -** register used by the autoincrement tracker. +** If the TEMP database is open, close it and mark the database schema +** as needing reloading. This must be done when using the SQLITE_TEMP_STORE +** or DEFAULT_TEMP_STORE pragmas. */ -SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse){ - AutoincInfo *p; /* Information about an AUTOINCREMENT */ - sqlite3 *db = pParse->db; /* The database connection */ - Db *pDb; /* Database only autoinc table */ - int memId; /* Register holding max rowid */ - int addr; /* A VDBE address */ - Vdbe *v = pParse->pVdbe; /* VDBE under construction */ - - /* This routine is never called during trigger-generation. It is - ** only called from the top-level */ - assert( pParse->pTriggerTab==0 ); - assert( pParse==sqlite3ParseToplevel(pParse) ); - - assert( v ); /* We failed long ago if this is not so */ - for(p = pParse->pAinc; p; p = p->pNext){ - pDb = &db->aDb[p->iDb]; - memId = p->regCtr; - assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); - sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenRead); - addr = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp4(v, OP_String8, 0, memId-1, 0, p->pTab->zName, 0); - sqlite3VdbeAddOp2(v, OP_Rewind, 0, addr+9); - sqlite3VdbeAddOp3(v, OP_Column, 0, 0, memId); - sqlite3VdbeAddOp3(v, OP_Ne, memId-1, addr+7, memId); - sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL); - sqlite3VdbeAddOp2(v, OP_Rowid, 0, memId+1); - sqlite3VdbeAddOp3(v, OP_Column, 0, 1, memId); - sqlite3VdbeAddOp2(v, OP_Goto, 0, addr+9); - sqlite3VdbeAddOp2(v, OP_Next, 0, addr+2); - sqlite3VdbeAddOp2(v, OP_Integer, 0, memId); - sqlite3VdbeAddOp0(v, OP_Close); +static int changeTempStorage(Parse *pParse, const char *zStorageType){ + int ts = getTempStore(zStorageType); + sqlite3 *db = pParse->db; + if( db->temp_store==ts ) return SQLITE_OK; + if( invalidateTempStorage( pParse ) != SQLITE_OK ){ + return SQLITE_ERROR; } + db->temp_store = (u8)ts; + return SQLITE_OK; } +#endif /* SQLITE_PAGER_PRAGMAS */ /* -** Update the maximum rowid for an autoincrement calculation. -** -** This routine should be called when the top of the stack holds a -** new rowid that is about to be inserted. If that new rowid is -** larger than the maximum rowid in the memId memory cell, then the -** memory cell is updated. The stack is unchanged. +** Generate code to return a single integer value. */ -static void autoIncStep(Parse *pParse, int memId, int regRowid){ - if( memId>0 ){ - sqlite3VdbeAddOp2(pParse->pVdbe, OP_MemMax, memId, regRowid); +static void returnSingleInt(Parse *pParse, const char *zLabel, i64 value){ + Vdbe *v = sqlite3GetVdbe(pParse); + int mem = ++pParse->nMem; + i64 *pI64 = sqlite3DbMallocRaw(pParse->db, sizeof(value)); + if( pI64 ){ + memcpy(pI64, &value, sizeof(value)); } + sqlite3VdbeAddOp4(v, OP_Int64, 0, mem, 0, (char*)pI64, P4_INT64); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLabel, SQLITE_STATIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1); } + /* -** This routine generates the code needed to write autoincrement -** maximum rowid values back into the sqlite_sequence register. -** Every statement that might do an INSERT into an autoincrement -** table (either directly or through triggers) needs to call this -** routine just before the "exit" code. +** Set the safety_level and pager flags for pager iDb. Or if iDb<0 +** set these values for all pagers. */ -SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse){ - AutoincInfo *p; - Vdbe *v = pParse->pVdbe; - sqlite3 *db = pParse->db; - - assert( v ); - for(p = pParse->pAinc; p; p = p->pNext){ - Db *pDb = &db->aDb[p->iDb]; - int j1, j2, j3, j4, j5; - int iRec; - int memId = p->regCtr; - - iRec = sqlite3GetTempReg(pParse); - assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); - sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenWrite); - j1 = sqlite3VdbeAddOp1(v, OP_NotNull, memId+1); - j2 = sqlite3VdbeAddOp0(v, OP_Rewind); - j3 = sqlite3VdbeAddOp3(v, OP_Column, 0, 0, iRec); - j4 = sqlite3VdbeAddOp3(v, OP_Eq, memId-1, 0, iRec); - sqlite3VdbeAddOp2(v, OP_Next, 0, j3); - sqlite3VdbeJumpHere(v, j2); - sqlite3VdbeAddOp2(v, OP_NewRowid, 0, memId+1); - j5 = sqlite3VdbeAddOp0(v, OP_Goto); - sqlite3VdbeJumpHere(v, j4); - sqlite3VdbeAddOp2(v, OP_Rowid, 0, memId+1); - sqlite3VdbeJumpHere(v, j1); - sqlite3VdbeJumpHere(v, j5); - sqlite3VdbeAddOp3(v, OP_MakeRecord, memId-1, 2, iRec); - sqlite3VdbeAddOp3(v, OP_Insert, 0, iRec, memId+1); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - sqlite3VdbeAddOp0(v, OP_Close); - sqlite3ReleaseTempReg(pParse, iRec); +#ifndef SQLITE_OMIT_PAGER_PRAGMAS +static void setAllPagerFlags(sqlite3 *db){ + if( db->autoCommit ){ + Db *pDb = db->aDb; + int n = db->nDb; + assert( SQLITE_FullFSync==PAGER_FULLFSYNC ); + assert( SQLITE_CkptFullFSync==PAGER_CKPT_FULLFSYNC ); + assert( SQLITE_CacheSpill==PAGER_CACHESPILL ); + assert( (PAGER_FULLFSYNC | PAGER_CKPT_FULLFSYNC | PAGER_CACHESPILL) + == PAGER_FLAGS_MASK ); + assert( (pDb->safety_level & PAGER_SYNCHRONOUS_MASK)==pDb->safety_level ); + while( (n--) > 0 ){ + if( pDb->pBt ){ + sqlite3BtreeSetPagerFlags(pDb->pBt, + pDb->safety_level | (db->flags & PAGER_FLAGS_MASK) ); + } + pDb++; + } } } #else +# define setAllPagerFlags(X) /* no-op */ +#endif + + /* -** If SQLITE_OMIT_AUTOINCREMENT is defined, then the three routines -** above are all no-ops +** Return a human-readable name for a constraint resolution action. */ -# define autoIncBegin(A,B,C) (0) -# define autoIncStep(A,B,C) -#endif /* SQLITE_OMIT_AUTOINCREMENT */ +#ifndef SQLITE_OMIT_FOREIGN_KEY +static const char *actionName(u8 action){ + const char *zName; + switch( action ){ + case OE_SetNull: zName = "SET NULL"; break; + case OE_SetDflt: zName = "SET DEFAULT"; break; + case OE_Cascade: zName = "CASCADE"; break; + case OE_Restrict: zName = "RESTRICT"; break; + default: zName = "NO ACTION"; + assert( action==OE_None ); break; + } + return zName; +} +#endif -/* Forward declaration */ -static int xferOptimization( - Parse *pParse, /* Parser context */ - Table *pDest, /* The table we are inserting into */ - Select *pSelect, /* A SELECT statement to use as the data source */ - int onError, /* How to handle constraint errors */ - int iDbDest /* The database of pDest */ -); +/* +** Parameter eMode must be one of the PAGER_JOURNALMODE_XXX constants +** defined in pager.h. This function returns the associated lowercase +** journal-mode name. +*/ +SQLITE_PRIVATE const char *sqlite3JournalModename(int eMode){ + static char * const azModeName[] = { + "delete", "persist", "off", "truncate", "memory" +#ifndef SQLITE_OMIT_WAL + , "wal" +#endif + }; + assert( PAGER_JOURNALMODE_DELETE==0 ); + assert( PAGER_JOURNALMODE_PERSIST==1 ); + assert( PAGER_JOURNALMODE_OFF==2 ); + assert( PAGER_JOURNALMODE_TRUNCATE==3 ); + assert( PAGER_JOURNALMODE_MEMORY==4 ); + assert( PAGER_JOURNALMODE_WAL==5 ); + assert( eMode>=0 && eMode<=ArraySize(azModeName) ); + + if( eMode==ArraySize(azModeName) ) return 0; + return azModeName[eMode]; +} /* -** This routine is call to handle SQL of the following forms: -** -** insert into TABLE (IDLIST) values(EXPRLIST) -** insert into TABLE (IDLIST) select -** -** The IDLIST following the table name is always optional. If omitted, -** then a list of all columns for the table is substituted. The IDLIST -** appears in the pColumn parameter. pColumn is NULL if IDLIST is omitted. -** -** The pList parameter holds EXPRLIST in the first form of the INSERT -** statement above, and pSelect is NULL. For the second form, pList is -** NULL and pSelect is a pointer to the select statement used to generate -** data for the insert. -** -** The code generated follows one of four templates. For a simple -** select with data coming from a VALUES clause, the code executes -** once straight down through. Pseudo-code follows (we call this -** the "1st template"): -** -** open write cursor to
and its indices -** puts VALUES clause expressions onto the stack -** write the resulting record into
-** cleanup -** -** The three remaining templates assume the statement is of the form -** -** INSERT INTO
SELECT ... -** -** If the SELECT clause is of the restricted form "SELECT * FROM " - -** in other words if the SELECT pulls all columns from a single table -** and there is no WHERE or LIMIT or GROUP BY or ORDER BY clauses, and -** if and are distinct tables but have identical -** schemas, including all the same indices, then a special optimization -** is invoked that copies raw records from over to . -** See the xferOptimization() function for the implementation of this -** template. This is the 2nd template. -** -** open a write cursor to
-** open read cursor on -** transfer all records in over to
-** close cursors -** foreach index on
-** open a write cursor on the
index -** open a read cursor on the corresponding index -** transfer all records from the read to the write cursors -** close cursors -** end foreach +** Process a pragma statement. ** -** The 3rd template is for when the second template does not apply -** and the SELECT clause does not read from
at any time. -** The generated code follows this template: +** Pragmas are of this form: ** -** EOF <- 0 -** X <- A -** goto B -** A: setup for the SELECT -** loop over the rows in the SELECT -** load values into registers R..R+n -** yield X -** end loop -** cleanup after the SELECT -** EOF <- 1 -** yield X -** goto A -** B: open write cursor to
and its indices -** C: yield X -** if EOF goto D -** insert the select result into
from R..R+n -** goto C -** D: cleanup +** PRAGMA [database.]id [= value] ** -** The 4th template is used if the insert statement takes its -** values from a SELECT but the data is being inserted into a table -** that is also read as part of the SELECT. In the third form, -** we have to use a intermediate table to store the results of -** the select. The template is like this: +** The identifier might also be a string. The value is a string, and +** identifier, or a number. If minusFlag is true, then the value is +** a number that was preceded by a minus sign. ** -** EOF <- 0 -** X <- A -** goto B -** A: setup for the SELECT -** loop over the tables in the SELECT -** load value into register R..R+n -** yield X -** end loop -** cleanup after the SELECT -** EOF <- 1 -** yield X -** halt-error -** B: open temp table -** L: yield X -** if EOF goto M -** insert row from R..R+n into temp table -** goto L -** M: open write cursor to
and its indices -** rewind temp table -** C: loop over rows of intermediate table -** transfer values form intermediate table into
-** end loop -** D: cleanup +** If the left side is "database.id" then pId1 is the database name +** and pId2 is the id. If the left side is just "id" then pId1 is the +** id and pId2 is any empty string. */ -SQLITE_PRIVATE void sqlite3Insert( - Parse *pParse, /* Parser context */ - SrcList *pTabList, /* Name of table into which we are inserting */ - ExprList *pList, /* List of values to be inserted */ - Select *pSelect, /* A SELECT statement to use as the data source */ - IdList *pColumn, /* Column names corresponding to IDLIST. */ - int onError /* How to handle constraint errors */ +SQLITE_PRIVATE void sqlite3Pragma( + Parse *pParse, + Token *pId1, /* First part of [database.]id field */ + Token *pId2, /* Second part of [database.]id field, or NULL */ + Token *pValue, /* Token for , or NULL */ + int minusFlag /* True if a '-' sign preceded */ ){ - sqlite3 *db; /* The main database structure */ - Table *pTab; /* The table to insert into. aka TABLE */ - char *zTab; /* Name of the table into which we are inserting */ - const char *zDb; /* Name of the database holding this table */ - int i, j, idx; /* Loop counters */ - Vdbe *v; /* Generate code into this virtual machine */ - Index *pIdx; /* For looping over indices of the table */ - int nColumn; /* Number of columns in the data */ - int nHidden = 0; /* Number of hidden columns if TABLE is virtual */ - int baseCur = 0; /* VDBE Cursor number for pTab */ - int keyColumn = -1; /* Column that is the INTEGER PRIMARY KEY */ - int endOfLoop; /* Label for the end of the insertion loop */ - int useTempTable = 0; /* Store SELECT results in intermediate table */ - int srcTab = 0; /* Data comes from this temporary cursor if >=0 */ - int addrInsTop = 0; /* Jump to label "D" */ - int addrCont = 0; /* Top of insert loop. Label "C" in templates 3 and 4 */ - int addrSelect = 0; /* Address of coroutine that implements the SELECT */ - SelectDest dest; /* Destination for SELECT on rhs of INSERT */ - int iDb; /* Index of database holding TABLE */ - Db *pDb; /* The database containing table being inserted into */ - int appendFlag = 0; /* True if the insert is likely to be an append */ + char *zLeft = 0; /* Nul-terminated UTF-8 string */ + char *zRight = 0; /* Nul-terminated UTF-8 string , or NULL */ + const char *zDb = 0; /* The database name */ + Token *pId; /* Pointer to token */ + char *aFcntl[4]; /* Argument to SQLITE_FCNTL_PRAGMA */ + int iDb; /* Database index for */ + int lwr, upr, mid; /* Binary search bounds */ + int rc; /* return value form SQLITE_FCNTL_PRAGMA */ + sqlite3 *db = pParse->db; /* The database connection */ + Db *pDb; /* The specific database being pragmaed */ + Vdbe *v = sqlite3GetVdbe(pParse); /* Prepared statement */ - /* Register allocations */ - int regFromSelect = 0;/* Base register for data coming from SELECT */ - int regAutoinc = 0; /* Register holding the AUTOINCREMENT counter */ - int regRowCount = 0; /* Memory cell used for the row counter */ - int regIns; /* Block of regs holding rowid+data being inserted */ - int regRowid; /* registers holding insert rowid */ - int regData; /* register holding first column to insert */ - int regEof = 0; /* Register recording end of SELECT data */ - int *aRegIdx = 0; /* One register allocated to each index */ + if( v==0 ) return; + sqlite3VdbeRunOnlyOnce(v); + pParse->nMem = 2; + + /* Interpret the [database.] part of the pragma statement. iDb is the + ** index of the database this pragma is being applied to in db.aDb[]. */ + iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId); + if( iDb<0 ) return; + pDb = &db->aDb[iDb]; + + /* If the temp database has been explicitly named as part of the + ** pragma, make sure it is open. + */ + if( iDb==1 && sqlite3OpenTempDatabase(pParse) ){ + return; + } + + zLeft = sqlite3NameFromToken(db, pId); + if( !zLeft ) return; + if( minusFlag ){ + zRight = sqlite3MPrintf(db, "-%T", pValue); + }else{ + zRight = sqlite3NameFromToken(db, pValue); + } + + assert( pId2 ); + zDb = pId2->n>0 ? pDb->zName : 0; + if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){ + goto pragma_out; + } + + /* Send an SQLITE_FCNTL_PRAGMA file-control to the underlying VFS + ** connection. If it returns SQLITE_OK, then assume that the VFS + ** handled the pragma and generate a no-op prepared statement. + */ + aFcntl[0] = 0; + aFcntl[1] = zLeft; + aFcntl[2] = zRight; + aFcntl[3] = 0; + db->busyHandler.nBusy = 0; + rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl); + if( rc==SQLITE_OK ){ + if( aFcntl[0] ){ + int mem = ++pParse->nMem; + sqlite3VdbeAddOp4(v, OP_String8, 0, mem, 0, aFcntl[0], 0); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "result", SQLITE_STATIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1); + sqlite3_free(aFcntl[0]); + } + goto pragma_out; + } + if( rc!=SQLITE_NOTFOUND ){ + if( aFcntl[0] ){ + sqlite3ErrorMsg(pParse, "%s", aFcntl[0]); + sqlite3_free(aFcntl[0]); + } + pParse->nErr++; + pParse->rc = rc; + goto pragma_out; + } + + /* Locate the pragma in the lookup table */ + lwr = 0; + upr = ArraySize(aPragmaNames)-1; + while( lwr<=upr ){ + mid = (lwr+upr)/2; + rc = sqlite3_stricmp(zLeft, aPragmaNames[mid].zName); + if( rc==0 ) break; + if( rc<0 ){ + upr = mid - 1; + }else{ + lwr = mid + 1; + } + } + if( lwr>upr ) goto pragma_out; + + /* Make sure the database schema is loaded if the pragma requires that */ + if( (aPragmaNames[mid].mPragFlag & PragFlag_NeedSchema)!=0 ){ + if( sqlite3ReadSchema(pParse) ) goto pragma_out; + } + + /* Jump to the appropriate pragma handler */ + switch( aPragmaNames[mid].ePragTyp ){ + +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED) + /* + ** PRAGMA [database.]default_cache_size + ** PRAGMA [database.]default_cache_size=N + ** + ** The first form reports the current persistent setting for the + ** page cache size. The value returned is the maximum number of + ** pages in the page cache. The second form sets both the current + ** page cache size value and the persistent page cache size value + ** stored in the database file. + ** + ** Older versions of SQLite would set the default cache size to a + ** negative number to indicate synchronous=OFF. These days, synchronous + ** is always on by default regardless of the sign of the default cache + ** size. But continue to take the absolute value of the default cache + ** size of historical compatibility. + */ + case PragTyp_DEFAULT_CACHE_SIZE: { + static const int iLn = VDBE_OFFSET_LINENO(2); + static const VdbeOpList getCacheSize[] = { + { OP_Transaction, 0, 0, 0}, /* 0 */ + { OP_ReadCookie, 0, 1, BTREE_DEFAULT_CACHE_SIZE}, /* 1 */ + { OP_IfPos, 1, 8, 0}, + { OP_Integer, 0, 2, 0}, + { OP_Subtract, 1, 2, 1}, + { OP_IfPos, 1, 8, 0}, + { OP_Integer, 0, 1, 0}, /* 6 */ + { OP_Noop, 0, 0, 0}, + { OP_ResultRow, 1, 1, 0}, + }; + int addr; + sqlite3VdbeUsesBtree(v, iDb); + if( !zRight ){ + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", SQLITE_STATIC); + pParse->nMem += 2; + addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize,iLn); + sqlite3VdbeChangeP1(v, addr, iDb); + sqlite3VdbeChangeP1(v, addr+1, iDb); + sqlite3VdbeChangeP1(v, addr+6, SQLITE_DEFAULT_CACHE_SIZE); + }else{ + int size = sqlite3AbsInt32(sqlite3Atoi(zRight)); + sqlite3BeginWriteOperation(pParse, 0, iDb); + sqlite3VdbeAddOp2(v, OP_Integer, size, 1); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, 1); + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pDb->pSchema->cache_size = size; + sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); + } + break; + } +#endif /* !SQLITE_OMIT_PAGER_PRAGMAS && !SQLITE_OMIT_DEPRECATED */ + +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) + /* + ** PRAGMA [database.]page_size + ** PRAGMA [database.]page_size=N + ** + ** The first form reports the current setting for the + ** database page size in bytes. The second form sets the + ** database page size value. The value can only be set if + ** the database has not yet been created. + */ + case PragTyp_PAGE_SIZE: { + Btree *pBt = pDb->pBt; + assert( pBt!=0 ); + if( !zRight ){ + int size = ALWAYS(pBt) ? sqlite3BtreeGetPageSize(pBt) : 0; + returnSingleInt(pParse, "page_size", size); + }else{ + /* Malloc may fail when setting the page-size, as there is an internal + ** buffer that the pager module resizes using sqlite3_realloc(). + */ + db->nextPagesize = sqlite3Atoi(zRight); + if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize,-1,0) ){ + db->mallocFailed = 1; + } + } + break; + } + + /* + ** PRAGMA [database.]secure_delete + ** PRAGMA [database.]secure_delete=ON/OFF + ** + ** The first form reports the current setting for the + ** secure_delete flag. The second form changes the secure_delete + ** flag setting and reports thenew value. + */ + case PragTyp_SECURE_DELETE: { + Btree *pBt = pDb->pBt; + int b = -1; + assert( pBt!=0 ); + if( zRight ){ + b = sqlite3GetBoolean(zRight, 0); + } + if( pId2->n==0 && b>=0 ){ + int ii; + for(ii=0; iinDb; ii++){ + sqlite3BtreeSecureDelete(db->aDb[ii].pBt, b); + } + } + b = sqlite3BtreeSecureDelete(pBt, b); + returnSingleInt(pParse, "secure_delete", b); + break; + } + + /* + ** PRAGMA [database.]max_page_count + ** PRAGMA [database.]max_page_count=N + ** + ** The first form reports the current setting for the + ** maximum number of pages in the database file. The + ** second form attempts to change this setting. Both + ** forms return the current setting. + ** + ** The absolute value of N is used. This is undocumented and might + ** change. The only purpose is to provide an easy way to test + ** the sqlite3AbsInt32() function. + ** + ** PRAGMA [database.]page_count + ** + ** Return the number of pages in the specified database. + */ + case PragTyp_PAGE_COUNT: { + int iReg; + sqlite3CodeVerifySchema(pParse, iDb); + iReg = ++pParse->nMem; + if( sqlite3Tolower(zLeft[0])=='p' ){ + sqlite3VdbeAddOp2(v, OP_Pagecount, iDb, iReg); + }else{ + sqlite3VdbeAddOp3(v, OP_MaxPgcnt, iDb, iReg, + sqlite3AbsInt32(sqlite3Atoi(zRight))); + } + sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); + break; + } -#ifndef SQLITE_OMIT_TRIGGER - int isView; /* True if attempting to insert into a view */ - Trigger *pTrigger; /* List of triggers on pTab, if required */ - int tmask; /* Mask of trigger times */ -#endif + /* + ** PRAGMA [database.]locking_mode + ** PRAGMA [database.]locking_mode = (normal|exclusive) + */ + case PragTyp_LOCKING_MODE: { + const char *zRet = "normal"; + int eMode = getLockingMode(zRight); - db = pParse->db; - memset(&dest, 0, sizeof(dest)); - if( pParse->nErr || db->mallocFailed ){ - goto insert_cleanup; + if( pId2->n==0 && eMode==PAGER_LOCKINGMODE_QUERY ){ + /* Simple "PRAGMA locking_mode;" statement. This is a query for + ** the current default locking mode (which may be different to + ** the locking-mode of the main database). + */ + eMode = db->dfltLockMode; + }else{ + Pager *pPager; + if( pId2->n==0 ){ + /* This indicates that no database name was specified as part + ** of the PRAGMA command. In this case the locking-mode must be + ** set on all attached databases, as well as the main db file. + ** + ** Also, the sqlite3.dfltLockMode variable is set so that + ** any subsequently attached databases also use the specified + ** locking mode. + */ + int ii; + assert(pDb==&db->aDb[0]); + for(ii=2; iinDb; ii++){ + pPager = sqlite3BtreePager(db->aDb[ii].pBt); + sqlite3PagerLockingMode(pPager, eMode); + } + db->dfltLockMode = (u8)eMode; + } + pPager = sqlite3BtreePager(pDb->pBt); + eMode = sqlite3PagerLockingMode(pPager, eMode); + } + + assert( eMode==PAGER_LOCKINGMODE_NORMAL + || eMode==PAGER_LOCKINGMODE_EXCLUSIVE ); + if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){ + zRet = "exclusive"; + } + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "locking_mode", SQLITE_STATIC); + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, zRet, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + break; } - /* Locate the table into which we will be inserting new information. + /* + ** PRAGMA [database.]journal_mode + ** PRAGMA [database.]journal_mode = + ** (delete|persist|off|truncate|memory|wal|off) */ - assert( pTabList->nSrc==1 ); - zTab = pTabList->a[0].zName; - if( NEVER(zTab==0) ) goto insert_cleanup; - pTab = sqlite3SrcListLookup(pParse, pTabList); - if( pTab==0 ){ - goto insert_cleanup; + case PragTyp_JOURNAL_MODE: { + int eMode; /* One of the PAGER_JOURNALMODE_XXX symbols */ + int ii; /* Loop counter */ + + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "journal_mode", SQLITE_STATIC); + + if( zRight==0 ){ + /* If there is no "=MODE" part of the pragma, do a query for the + ** current mode */ + eMode = PAGER_JOURNALMODE_QUERY; + }else{ + const char *zMode; + int n = sqlite3Strlen30(zRight); + for(eMode=0; (zMode = sqlite3JournalModename(eMode))!=0; eMode++){ + if( sqlite3StrNICmp(zRight, zMode, n)==0 ) break; + } + if( !zMode ){ + /* If the "=MODE" part does not match any known journal mode, + ** then do a query */ + eMode = PAGER_JOURNALMODE_QUERY; + } + } + if( eMode==PAGER_JOURNALMODE_QUERY && pId2->n==0 ){ + /* Convert "PRAGMA journal_mode" into "PRAGMA main.journal_mode" */ + iDb = 0; + pId2->n = 1; + } + for(ii=db->nDb-1; ii>=0; ii--){ + if( db->aDb[ii].pBt && (ii==iDb || pId2->n==0) ){ + sqlite3VdbeUsesBtree(v, ii); + sqlite3VdbeAddOp3(v, OP_JournalMode, ii, 1, eMode); + } + } + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + break; } - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - assert( iDbnDb ); - pDb = &db->aDb[iDb]; - zDb = pDb->zName; - if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0, zDb) ){ - goto insert_cleanup; + + /* + ** PRAGMA [database.]journal_size_limit + ** PRAGMA [database.]journal_size_limit=N + ** + ** Get or set the size limit on rollback journal files. + */ + case PragTyp_JOURNAL_SIZE_LIMIT: { + Pager *pPager = sqlite3BtreePager(pDb->pBt); + i64 iLimit = -2; + if( zRight ){ + sqlite3DecOrHexToI64(zRight, &iLimit); + if( iLimit<-1 ) iLimit = -1; + } + iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit); + returnSingleInt(pParse, "journal_size_limit", iLimit); + break; } - /* Figure out if we have any triggers and if the table being - ** inserted into is a view +#endif /* SQLITE_OMIT_PAGER_PRAGMAS */ + + /* + ** PRAGMA [database.]auto_vacuum + ** PRAGMA [database.]auto_vacuum=N + ** + ** Get or set the value of the database 'auto-vacuum' parameter. + ** The value is one of: 0 NONE 1 FULL 2 INCREMENTAL */ -#ifndef SQLITE_OMIT_TRIGGER - pTrigger = sqlite3TriggersExist(pParse, pTab, TK_INSERT, 0, &tmask); - isView = pTab->pSelect!=0; -#else -# define pTrigger 0 -# define tmask 0 -# define isView 0 -#endif -#ifdef SQLITE_OMIT_VIEW -# undef isView -# define isView 0 +#ifndef SQLITE_OMIT_AUTOVACUUM + case PragTyp_AUTO_VACUUM: { + Btree *pBt = pDb->pBt; + assert( pBt!=0 ); + if( !zRight ){ + returnSingleInt(pParse, "auto_vacuum", sqlite3BtreeGetAutoVacuum(pBt)); + }else{ + int eAuto = getAutoVacuum(zRight); + assert( eAuto>=0 && eAuto<=2 ); + db->nextAutovac = (u8)eAuto; + /* Call SetAutoVacuum() to set initialize the internal auto and + ** incr-vacuum flags. This is required in case this connection + ** creates the database file. It is important that it is created + ** as an auto-vacuum capable db. + */ + rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto); + if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){ + /* When setting the auto_vacuum mode to either "full" or + ** "incremental", write the value of meta[6] in the database + ** file. Before writing to meta[6], check that meta[3] indicates + ** that this really is an auto-vacuum capable database. + */ + static const int iLn = VDBE_OFFSET_LINENO(2); + static const VdbeOpList setMeta6[] = { + { OP_Transaction, 0, 1, 0}, /* 0 */ + { OP_ReadCookie, 0, 1, BTREE_LARGEST_ROOT_PAGE}, + { OP_If, 1, 0, 0}, /* 2 */ + { OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */ + { OP_Integer, 0, 1, 0}, /* 4 */ + { OP_SetCookie, 0, BTREE_INCR_VACUUM, 1}, /* 5 */ + }; + int iAddr; + iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6, iLn); + sqlite3VdbeChangeP1(v, iAddr, iDb); + sqlite3VdbeChangeP1(v, iAddr+1, iDb); + sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4); + sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1); + sqlite3VdbeChangeP1(v, iAddr+5, iDb); + sqlite3VdbeUsesBtree(v, iDb); + } + } + break; + } #endif - assert( (pTrigger && tmask) || (pTrigger==0 && tmask==0) ); - /* If pTab is really a view, make sure it has been initialized. - ** ViewGetColumnNames() is a no-op if pTab is not a view (or virtual - ** module table). + /* + ** PRAGMA [database.]incremental_vacuum(N) + ** + ** Do N steps of incremental vacuuming on a database. */ - if( sqlite3ViewGetColumnNames(pParse, pTab) ){ - goto insert_cleanup; +#ifndef SQLITE_OMIT_AUTOVACUUM + case PragTyp_INCREMENTAL_VACUUM: { + int iLimit, addr; + if( zRight==0 || !sqlite3GetInt32(zRight, &iLimit) || iLimit<=0 ){ + iLimit = 0x7fffffff; + } + sqlite3BeginWriteOperation(pParse, 0, iDb); + sqlite3VdbeAddOp2(v, OP_Integer, iLimit, 1); + addr = sqlite3VdbeAddOp1(v, OP_IncrVacuum, iDb); VdbeCoverage(v); + sqlite3VdbeAddOp1(v, OP_ResultRow, 1); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); + sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr); + break; } +#endif - /* Ensure that: - * (a) the table is not read-only, - * (b) that if it is a view then ON INSERT triggers exist +#ifndef SQLITE_OMIT_PAGER_PRAGMAS + /* + ** PRAGMA [database.]cache_size + ** PRAGMA [database.]cache_size=N + ** + ** The first form reports the current local setting for the + ** page cache size. The second form sets the local + ** page cache size value. If N is positive then that is the + ** number of pages in the cache. If N is negative, then the + ** number of pages is adjusted so that the cache uses -N kibibytes + ** of memory. */ - if( sqlite3IsReadOnly(pParse, pTab, tmask) ){ - goto insert_cleanup; + case PragTyp_CACHE_SIZE: { + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + if( !zRight ){ + returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size); + }else{ + int size = sqlite3Atoi(zRight); + pDb->pSchema->cache_size = size; + sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); + } + break; } - /* Allocate a VDBE + /* + ** PRAGMA [database.]mmap_size(N) + ** + ** Used to set mapping size limit. The mapping size limit is + ** used to limit the aggregate size of all memory mapped regions of the + ** database file. If this parameter is set to zero, then memory mapping + ** is not used at all. If N is negative, then the default memory map + ** limit determined by sqlite3_config(SQLITE_CONFIG_MMAP_SIZE) is set. + ** The parameter N is measured in bytes. + ** + ** This value is advisory. The underlying VFS is free to memory map + ** as little or as much as it wants. Except, if N is set to 0 then the + ** upper layers will never invoke the xFetch interfaces to the VFS. */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto insert_cleanup; - if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, pSelect || pTrigger, iDb); + case PragTyp_MMAP_SIZE: { + sqlite3_int64 sz; +#if SQLITE_MAX_MMAP_SIZE>0 + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + if( zRight ){ + int ii; + sqlite3DecOrHexToI64(zRight, &sz); + if( sz<0 ) sz = sqlite3GlobalConfig.szMmap; + if( pId2->n==0 ) db->szMmap = sz; + for(ii=db->nDb-1; ii>=0; ii--){ + if( db->aDb[ii].pBt && (ii==iDb || pId2->n==0) ){ + sqlite3BtreeSetMmapLimit(db->aDb[ii].pBt, sz); + } + } + } + sz = -1; + rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_MMAP_SIZE, &sz); +#else + sz = 0; + rc = SQLITE_OK; +#endif + if( rc==SQLITE_OK ){ + returnSingleInt(pParse, "mmap_size", sz); + }else if( rc!=SQLITE_NOTFOUND ){ + pParse->nErr++; + pParse->rc = rc; + } + break; + } -#ifndef SQLITE_OMIT_XFER_OPT - /* If the statement is of the form + /* + ** PRAGMA temp_store + ** PRAGMA temp_store = "default"|"memory"|"file" ** - ** INSERT INTO SELECT * FROM ; + ** Return or set the local value of the temp_store flag. Changing + ** the local value does not make changes to the disk file and the default + ** value will be restored the next time the database is opened. ** - ** Then special optimizations can be applied that make the transfer - ** very fast and which reduce fragmentation of indices. + ** Note that it is possible for the library compile-time options to + ** override this setting + */ + case PragTyp_TEMP_STORE: { + if( !zRight ){ + returnSingleInt(pParse, "temp_store", db->temp_store); + }else{ + changeTempStorage(pParse, zRight); + } + break; + } + + /* + ** PRAGMA temp_store_directory + ** PRAGMA temp_store_directory = ""|"directory_name" + ** + ** Return or set the local value of the temp_store_directory flag. Changing + ** the value sets a specific directory to be used for temporary files. + ** Setting to a null string reverts to the default temporary directory search. + ** If temporary directory is changed, then invalidateTempStorage. ** - ** This is the 2nd template. */ - if( pColumn==0 && xferOptimization(pParse, pTab, pSelect, onError, iDb) ){ - assert( !pTrigger ); - assert( pList==0 ); - goto insert_end; + case PragTyp_TEMP_STORE_DIRECTORY: { + if( !zRight ){ + if( sqlite3_temp_directory ){ + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, + "temp_store_directory", SQLITE_STATIC); + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_temp_directory, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + } + }else{ +#ifndef SQLITE_OMIT_WSD + if( zRight[0] ){ + int res; + rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res); + if( rc!=SQLITE_OK || res==0 ){ + sqlite3ErrorMsg(pParse, "not a writable directory"); + goto pragma_out; + } + } + if( SQLITE_TEMP_STORE==0 + || (SQLITE_TEMP_STORE==1 && db->temp_store<=1) + || (SQLITE_TEMP_STORE==2 && db->temp_store==1) + ){ + invalidateTempStorage(pParse); + } + sqlite3_free(sqlite3_temp_directory); + if( zRight[0] ){ + sqlite3_temp_directory = sqlite3_mprintf("%s", zRight); + }else{ + sqlite3_temp_directory = 0; + } +#endif /* SQLITE_OMIT_WSD */ + } + break; } -#endif /* SQLITE_OMIT_XFER_OPT */ - /* If this is an AUTOINCREMENT table, look up the sequence number in the - ** sqlite_sequence table and store it in memory cell regAutoinc. +#if SQLITE_OS_WIN + /* + ** PRAGMA data_store_directory + ** PRAGMA data_store_directory = ""|"directory_name" + ** + ** Return or set the local value of the data_store_directory flag. Changing + ** the value sets a specific directory to be used for database files that + ** were specified with a relative pathname. Setting to a null string reverts + ** to the default database directory, which for database files specified with + ** a relative path will probably be based on the current directory for the + ** process. Database file specified with an absolute path are not impacted + ** by this setting, regardless of its value. + ** */ - regAutoinc = autoIncBegin(pParse, iDb, pTab); + case PragTyp_DATA_STORE_DIRECTORY: { + if( !zRight ){ + if( sqlite3_data_directory ){ + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, + "data_store_directory", SQLITE_STATIC); + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_data_directory, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + } + }else{ +#ifndef SQLITE_OMIT_WSD + if( zRight[0] ){ + int res; + rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res); + if( rc!=SQLITE_OK || res==0 ){ + sqlite3ErrorMsg(pParse, "not a writable directory"); + goto pragma_out; + } + } + sqlite3_free(sqlite3_data_directory); + if( zRight[0] ){ + sqlite3_data_directory = sqlite3_mprintf("%s", zRight); + }else{ + sqlite3_data_directory = 0; + } +#endif /* SQLITE_OMIT_WSD */ + } + break; + } +#endif - /* Figure out how many columns of data are supplied. If the data - ** is coming from a SELECT statement, then generate a co-routine that - ** produces a single row of the SELECT on each invocation. The - ** co-routine is the common header to the 3rd and 4th templates. +#if SQLITE_ENABLE_LOCKING_STYLE + /* + ** PRAGMA [database.]lock_proxy_file + ** PRAGMA [database.]lock_proxy_file = ":auto:"|"lock_file_path" + ** + ** Return or set the value of the lock_proxy_file flag. Changing + ** the value sets a specific file to be used for database access locks. + ** */ - if( pSelect ){ - /* Data is coming from a SELECT. Generate code to implement that SELECT - ** as a co-routine. The code is common to both the 3rd and 4th - ** templates: - ** - ** EOF <- 0 - ** X <- A - ** goto B - ** A: setup for the SELECT - ** loop over the tables in the SELECT - ** load value into register R..R+n - ** yield X - ** end loop - ** cleanup after the SELECT - ** EOF <- 1 - ** yield X - ** halt-error - ** - ** On each invocation of the co-routine, it puts a single row of the - ** SELECT result into registers dest.iMem...dest.iMem+dest.nMem-1. - ** (These output registers are allocated by sqlite3Select().) When - ** the SELECT completes, it sets the EOF flag stored in regEof. - */ - int rc, j1; - - regEof = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Integer, 0, regEof); /* EOF <- 0 */ - VdbeComment((v, "SELECT eof flag")); - sqlite3SelectDestInit(&dest, SRT_Coroutine, ++pParse->nMem); - addrSelect = sqlite3VdbeCurrentAddr(v)+2; - sqlite3VdbeAddOp2(v, OP_Integer, addrSelect-1, dest.iParm); - j1 = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0); - VdbeComment((v, "Jump over SELECT coroutine")); - - /* Resolve the expressions in the SELECT statement and execute it. */ - rc = sqlite3Select(pParse, pSelect, &dest); - assert( pParse->nErr==0 || rc ); - if( rc || NEVER(pParse->nErr) || db->mallocFailed ){ - goto insert_cleanup; + case PragTyp_LOCK_PROXY_FILE: { + if( !zRight ){ + Pager *pPager = sqlite3BtreePager(pDb->pBt); + char *proxy_file_path = NULL; + sqlite3_file *pFile = sqlite3PagerFile(pPager); + sqlite3OsFileControlHint(pFile, SQLITE_GET_LOCKPROXYFILE, + &proxy_file_path); + + if( proxy_file_path ){ + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, + "lock_proxy_file", SQLITE_STATIC); + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, proxy_file_path, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + } + }else{ + Pager *pPager = sqlite3BtreePager(pDb->pBt); + sqlite3_file *pFile = sqlite3PagerFile(pPager); + int res; + if( zRight[0] ){ + res=sqlite3OsFileControl(pFile, SQLITE_SET_LOCKPROXYFILE, + zRight); + } else { + res=sqlite3OsFileControl(pFile, SQLITE_SET_LOCKPROXYFILE, + NULL); + } + if( res!=SQLITE_OK ){ + sqlite3ErrorMsg(pParse, "failed to set lock proxy file"); + goto pragma_out; + } + } + break; + } +#endif /* SQLITE_ENABLE_LOCKING_STYLE */ + + /* + ** PRAGMA [database.]synchronous + ** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL + ** + ** Return or set the local value of the synchronous flag. Changing + ** the local value does not make changes to the disk file and the + ** default value will be restored the next time the database is + ** opened. + */ + case PragTyp_SYNCHRONOUS: { + if( !zRight ){ + returnSingleInt(pParse, "synchronous", pDb->safety_level-1); + }else{ + if( !db->autoCommit ){ + sqlite3ErrorMsg(pParse, + "Safety level may not be changed inside a transaction"); + }else{ + pDb->safety_level = getSafetyLevel(zRight,0,1)+1; + setAllPagerFlags(db); + } } - sqlite3VdbeAddOp2(v, OP_Integer, 1, regEof); /* EOF <- 1 */ - sqlite3VdbeAddOp1(v, OP_Yield, dest.iParm); /* yield X */ - sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_INTERNAL, OE_Abort); - VdbeComment((v, "End of SELECT coroutine")); - sqlite3VdbeJumpHere(v, j1); /* label B: */ + break; + } +#endif /* SQLITE_OMIT_PAGER_PRAGMAS */ - regFromSelect = dest.iMem; - assert( pSelect->pEList ); - nColumn = pSelect->pEList->nExpr; - assert( dest.nMem==nColumn ); +#ifndef SQLITE_OMIT_FLAG_PRAGMAS + case PragTyp_FLAG: { + if( zRight==0 ){ + returnSingleInt(pParse, aPragmaNames[mid].zName, + (db->flags & aPragmaNames[mid].iArg)!=0 ); + }else{ + int mask = aPragmaNames[mid].iArg; /* Mask of bits to set or clear. */ + if( db->autoCommit==0 ){ + /* Foreign key support may not be enabled or disabled while not + ** in auto-commit mode. */ + mask &= ~(SQLITE_ForeignKeys); + } +#if SQLITE_USER_AUTHENTICATION + if( db->auth.authLevel==UAUTH_User ){ + /* Do not allow non-admin users to modify the schema arbitrarily */ + mask &= ~(SQLITE_WriteSchema); + } +#endif - /* Set useTempTable to TRUE if the result of the SELECT statement - ** should be written into a temporary table (template 4). Set to - ** FALSE if each* row of the SELECT can be written directly into - ** the destination table (template 3). - ** - ** A temp table must be used if the table being updated is also one - ** of the tables being read by the SELECT statement. Also use a - ** temp table in the case of row triggers. - */ - if( pTrigger || readsTable(pParse, addrSelect, iDb, pTab) ){ - useTempTable = 1; - } + if( sqlite3GetBoolean(zRight, 0) ){ + db->flags |= mask; + }else{ + db->flags &= ~mask; + if( mask==SQLITE_DeferFKs ) db->nDeferredImmCons = 0; + } - if( useTempTable ){ - /* Invoke the coroutine to extract information from the SELECT - ** and add it to a transient table srcTab. The code generated - ** here is from the 4th template: - ** - ** B: open temp table - ** L: yield X - ** if EOF goto M - ** insert row from R..R+n into temp table - ** goto L - ** M: ... + /* Many of the flag-pragmas modify the code generated by the SQL + ** compiler (eg. count_changes). So add an opcode to expire all + ** compiled SQL statements after modifying a pragma value. */ - int regRec; /* Register to hold packed record */ - int regTempRowid; /* Register to hold temp table ROWID */ - int addrTop; /* Label "L" */ - int addrIf; /* Address of jump to M */ + sqlite3VdbeAddOp2(v, OP_Expire, 0, 0); + setAllPagerFlags(db); + } + break; + } +#endif /* SQLITE_OMIT_FLAG_PRAGMAS */ - srcTab = pParse->nTab++; - regRec = sqlite3GetTempReg(pParse); - regTempRowid = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_OpenEphemeral, srcTab, nColumn); - addrTop = sqlite3VdbeAddOp1(v, OP_Yield, dest.iParm); - addrIf = sqlite3VdbeAddOp1(v, OP_If, regEof); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regFromSelect, nColumn, regRec); - sqlite3VdbeAddOp2(v, OP_NewRowid, srcTab, regTempRowid); - sqlite3VdbeAddOp3(v, OP_Insert, srcTab, regRec, regTempRowid); - sqlite3VdbeAddOp2(v, OP_Goto, 0, addrTop); - sqlite3VdbeJumpHere(v, addrIf); - sqlite3ReleaseTempReg(pParse, regRec); - sqlite3ReleaseTempReg(pParse, regTempRowid); +#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS + /* + ** PRAGMA table_info(
) + ** + ** Return a single row for each column of the named table. The columns of + ** the returned data set are: + ** + ** cid: Column id (numbered from left to right, starting at 0) + ** name: Column name + ** type: Column declaration type. + ** notnull: True if 'NOT NULL' is part of column declaration + ** dflt_value: The default value for the column, if any. + */ + case PragTyp_TABLE_INFO: if( zRight ){ + Table *pTab; + pTab = sqlite3FindTable(db, zRight, zDb); + if( pTab ){ + int i, k; + int nHidden = 0; + Column *pCol; + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + sqlite3VdbeSetNumCols(v, 6); + pParse->nMem = 6; + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", SQLITE_STATIC); + sqlite3ViewGetColumnNames(pParse, pTab); + for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ + if( IsHiddenColumn(pCol) ){ + nHidden++; + continue; + } + sqlite3VdbeAddOp2(v, OP_Integer, i-nHidden, 1); + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pCol->zName, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, + pCol->zType ? pCol->zType : "", 0); + sqlite3VdbeAddOp2(v, OP_Integer, (pCol->notNull ? 1 : 0), 4); + if( pCol->zDflt ){ + sqlite3VdbeAddOp4(v, OP_String8, 0, 5, 0, (char*)pCol->zDflt, 0); + }else{ + sqlite3VdbeAddOp2(v, OP_Null, 0, 5); + } + if( (pCol->colFlags & COLFLAG_PRIMKEY)==0 ){ + k = 0; + }else if( pPk==0 ){ + k = 1; + }else{ + for(k=1; ALWAYS(k<=pTab->nCol) && pPk->aiColumn[k-1]!=i; k++){} + } + sqlite3VdbeAddOp2(v, OP_Integer, k, 6); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6); + } } - }else{ - /* This is the case if the data for the INSERT is coming from a VALUES - ** clause - */ - NameContext sNC; - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pParse; - srcTab = -1; - assert( useTempTable==0 ); - nColumn = pList ? pList->nExpr : 0; - for(i=0; ia[i].pExpr) ){ - goto insert_cleanup; + } + break; + + case PragTyp_STATS: { + Index *pIdx; + HashElem *i; + v = sqlite3GetVdbe(pParse); + sqlite3VdbeSetNumCols(v, 4); + pParse->nMem = 4; + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "table", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "index", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "width", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "height", SQLITE_STATIC); + for(i=sqliteHashFirst(&pDb->pSchema->tblHash); i; i=sqliteHashNext(i)){ + Table *pTab = sqliteHashData(i); + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, pTab->zName, 0); + sqlite3VdbeAddOp2(v, OP_Null, 0, 2); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pTab->szTabRow), 3); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pTab->nRowLogEst), 4); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pIdx->szIdxRow), 3); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pIdx->aiRowLogEst[0]), 4); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); + } + } + } + break; + + case PragTyp_INDEX_INFO: if( zRight ){ + Index *pIdx; + Table *pTab; + pIdx = sqlite3FindIndex(db, zRight, zDb); + if( pIdx ){ + int i; + pTab = pIdx->pTable; + sqlite3VdbeSetNumCols(v, 3); + pParse->nMem = 3; + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", SQLITE_STATIC); + for(i=0; inKeyCol; i++){ + i16 cnum = pIdx->aiColumn[i]; + sqlite3VdbeAddOp2(v, OP_Integer, i, 1); + sqlite3VdbeAddOp2(v, OP_Integer, cnum, 2); + assert( pTab->nCol>cnum ); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pTab->aCol[cnum].zName, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); } } } + break; - /* Make sure the number of columns in the source data matches the number - ** of columns to be inserted into the table. - */ - if( IsVirtual(pTab) ){ - for(i=0; inCol; i++){ - nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0); + case PragTyp_INDEX_LIST: if( zRight ){ + Index *pIdx; + Table *pTab; + int i; + pTab = sqlite3FindTable(db, zRight, zDb); + if( pTab ){ + v = sqlite3GetVdbe(pParse); + sqlite3VdbeSetNumCols(v, 3); + pParse->nMem = 3; + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", SQLITE_STATIC); + for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){ + sqlite3VdbeAddOp2(v, OP_Integer, i, 1); + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0); + sqlite3VdbeAddOp2(v, OP_Integer, IsUniqueIndex(pIdx), 3); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); + } } } - if( pColumn==0 && nColumn && nColumn!=(pTab->nCol-nHidden) ){ - sqlite3ErrorMsg(pParse, - "table %S has %d columns but %d values were supplied", - pTabList, 0, pTab->nCol-nHidden, nColumn); - goto insert_cleanup; + break; + + case PragTyp_DATABASE_LIST: { + int i; + sqlite3VdbeSetNumCols(v, 3); + pParse->nMem = 3; + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", SQLITE_STATIC); + for(i=0; inDb; i++){ + if( db->aDb[i].pBt==0 ) continue; + assert( db->aDb[i].zName!=0 ); + sqlite3VdbeAddOp2(v, OP_Integer, i, 1); + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, db->aDb[i].zName, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, + sqlite3BtreeGetFilename(db->aDb[i].pBt), 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); + } } - if( pColumn!=0 && nColumn!=pColumn->nId ){ - sqlite3ErrorMsg(pParse, "%d values for %d columns", nColumn, pColumn->nId); - goto insert_cleanup; + break; + + case PragTyp_COLLATION_LIST: { + int i = 0; + HashElem *p; + sqlite3VdbeSetNumCols(v, 2); + pParse->nMem = 2; + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); + for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){ + CollSeq *pColl = (CollSeq *)sqliteHashData(p); + sqlite3VdbeAddOp2(v, OP_Integer, i++, 1); + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pColl->zName, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); + } } + break; +#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */ - /* If the INSERT statement included an IDLIST term, then make sure - ** all elements of the IDLIST really are columns of the table and - ** remember the column indices. - ** - ** If the table has an INTEGER PRIMARY KEY column and that column - ** is named in the IDLIST, then record in the keyColumn variable - ** the index into IDLIST of the primary key column. keyColumn is - ** the index of the primary key as it appears in IDLIST, not as - ** is appears in the original table. (The index of the primary - ** key in the original table is pTab->iPKey.) - */ - if( pColumn ){ - for(i=0; inId; i++){ - pColumn->a[i].idx = -1; +#ifndef SQLITE_OMIT_FOREIGN_KEY + case PragTyp_FOREIGN_KEY_LIST: if( zRight ){ + FKey *pFK; + Table *pTab; + pTab = sqlite3FindTable(db, zRight, zDb); + if( pTab ){ + v = sqlite3GetVdbe(pParse); + pFK = pTab->pFKey; + if( pFK ){ + int i = 0; + sqlite3VdbeSetNumCols(v, 8); + pParse->nMem = 8; + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "on_update", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 6, COLNAME_NAME, "on_delete", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 7, COLNAME_NAME, "match", SQLITE_STATIC); + while(pFK){ + int j; + for(j=0; jnCol; j++){ + char *zCol = pFK->aCol[j].zCol; + char *zOnDelete = (char *)actionName(pFK->aAction[0]); + char *zOnUpdate = (char *)actionName(pFK->aAction[1]); + sqlite3VdbeAddOp2(v, OP_Integer, i, 1); + sqlite3VdbeAddOp2(v, OP_Integer, j, 2); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pFK->zTo, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, + pTab->aCol[pFK->aCol[j].iFrom].zName, 0); + sqlite3VdbeAddOp4(v, zCol ? OP_String8 : OP_Null, 0, 5, 0, zCol, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 6, 0, zOnUpdate, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 7, 0, zOnDelete, 0); + sqlite3VdbeAddOp4(v, OP_String8, 0, 8, 0, "NONE", 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 8); + } + ++i; + pFK = pFK->pNextFrom; + } + } } - for(i=0; inId; i++){ - for(j=0; jnCol; j++){ - if( sqlite3StrICmp(pColumn->a[i].zName, pTab->aCol[j].zName)==0 ){ - pColumn->a[i].idx = j; - if( j==pTab->iPKey ){ - keyColumn = i; + } + break; +#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */ + +#ifndef SQLITE_OMIT_FOREIGN_KEY +#ifndef SQLITE_OMIT_TRIGGER + case PragTyp_FOREIGN_KEY_CHECK: { + FKey *pFK; /* A foreign key constraint */ + Table *pTab; /* Child table contain "REFERENCES" keyword */ + Table *pParent; /* Parent table that child points to */ + Index *pIdx; /* Index in the parent table */ + int i; /* Loop counter: Foreign key number for pTab */ + int j; /* Loop counter: Field of the foreign key */ + HashElem *k; /* Loop counter: Next table in schema */ + int x; /* result variable */ + int regResult; /* 3 registers to hold a result row */ + int regKey; /* Register to hold key for checking the FK */ + int regRow; /* Registers to hold a row from pTab */ + int addrTop; /* Top of a loop checking foreign keys */ + int addrOk; /* Jump here if the key is OK */ + int *aiCols; /* child to parent column mapping */ + + regResult = pParse->nMem+1; + pParse->nMem += 4; + regKey = ++pParse->nMem; + regRow = ++pParse->nMem; + v = sqlite3GetVdbe(pParse); + sqlite3VdbeSetNumCols(v, 4); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "table", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "rowid", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "parent", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "fkid", SQLITE_STATIC); + sqlite3CodeVerifySchema(pParse, iDb); + k = sqliteHashFirst(&db->aDb[iDb].pSchema->tblHash); + while( k ){ + if( zRight ){ + pTab = sqlite3LocateTable(pParse, 0, zRight, zDb); + k = 0; + }else{ + pTab = (Table*)sqliteHashData(k); + k = sqliteHashNext(k); + } + if( pTab==0 || pTab->pFKey==0 ) continue; + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + if( pTab->nCol+regRow>pParse->nMem ) pParse->nMem = pTab->nCol + regRow; + sqlite3OpenTable(pParse, 0, iDb, pTab, OP_OpenRead); + sqlite3VdbeAddOp4(v, OP_String8, 0, regResult, 0, pTab->zName, + P4_TRANSIENT); + for(i=1, pFK=pTab->pFKey; pFK; i++, pFK=pFK->pNextFrom){ + pParent = sqlite3FindTable(db, pFK->zTo, zDb); + if( pParent==0 ) continue; + pIdx = 0; + sqlite3TableLock(pParse, iDb, pParent->tnum, 0, pParent->zName); + x = sqlite3FkLocateIndex(pParse, pParent, pFK, &pIdx, 0); + if( x==0 ){ + if( pIdx==0 ){ + sqlite3OpenTable(pParse, i, iDb, pParent, OP_OpenRead); + }else{ + sqlite3VdbeAddOp3(v, OP_OpenRead, i, pIdx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); } + }else{ + k = 0; break; } } - if( j>=pTab->nCol ){ - if( sqlite3IsRowid(pColumn->a[i].zName) ){ - keyColumn = i; + assert( pParse->nErr>0 || pFK==0 ); + if( pFK ) break; + if( pParse->nTabnTab = i; + addrTop = sqlite3VdbeAddOp1(v, OP_Rewind, 0); VdbeCoverage(v); + for(i=1, pFK=pTab->pFKey; pFK; i++, pFK=pFK->pNextFrom){ + pParent = sqlite3FindTable(db, pFK->zTo, zDb); + pIdx = 0; + aiCols = 0; + if( pParent ){ + x = sqlite3FkLocateIndex(pParse, pParent, pFK, &pIdx, &aiCols); + assert( x==0 ); + } + addrOk = sqlite3VdbeMakeLabel(v); + if( pParent && pIdx==0 ){ + int iKey = pFK->aCol[0].iFrom; + assert( iKey>=0 && iKeynCol ); + if( iKey!=pTab->iPKey ){ + sqlite3VdbeAddOp3(v, OP_Column, 0, iKey, regRow); + sqlite3ColumnDefault(v, pTab, iKey, regRow); + sqlite3VdbeAddOp2(v, OP_IsNull, regRow, addrOk); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_MustBeInt, regRow, + sqlite3VdbeCurrentAddr(v)+3); VdbeCoverage(v); + }else{ + sqlite3VdbeAddOp2(v, OP_Rowid, 0, regRow); + } + sqlite3VdbeAddOp3(v, OP_NotExists, i, 0, regRow); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrOk); + sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); }else{ - sqlite3ErrorMsg(pParse, "table %S has no column named %s", - pTabList, 0, pColumn->a[i].zName); - pParse->checkSchema = 1; - goto insert_cleanup; + for(j=0; jnCol; j++){ + sqlite3ExprCodeGetColumnOfTable(v, pTab, 0, + aiCols ? aiCols[j] : pFK->aCol[j].iFrom, regRow+j); + sqlite3VdbeAddOp2(v, OP_IsNull, regRow+j, addrOk); VdbeCoverage(v); + } + if( pParent ){ + sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, pFK->nCol, regKey, + sqlite3IndexAffinityStr(v,pIdx), pFK->nCol); + sqlite3VdbeAddOp4Int(v, OP_Found, i, addrOk, regKey, 0); + VdbeCoverage(v); + } } + sqlite3VdbeAddOp2(v, OP_Rowid, 0, regResult+1); + sqlite3VdbeAddOp4(v, OP_String8, 0, regResult+2, 0, + pFK->zTo, P4_TRANSIENT); + sqlite3VdbeAddOp2(v, OP_Integer, i-1, regResult+3); + sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, 4); + sqlite3VdbeResolveLabel(v, addrOk); + sqlite3DbFree(db, aiCols); } + sqlite3VdbeAddOp2(v, OP_Next, 0, addrTop+1); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addrTop); } } + break; +#endif /* !defined(SQLITE_OMIT_TRIGGER) */ +#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */ - /* If there is no IDLIST term but the table has an integer primary - ** key, the set the keyColumn variable to the primary key column index - ** in the original table definition. - */ - if( pColumn==0 && nColumn>0 ){ - keyColumn = pTab->iPKey; +#ifndef NDEBUG + case PragTyp_PARSER_TRACE: { + if( zRight ){ + if( sqlite3GetBoolean(zRight, 0) ){ + sqlite3ParserTrace(stderr, "parser: "); + }else{ + sqlite3ParserTrace(0, 0); + } + } } - - /* Initialize the count of rows to be inserted + break; +#endif + + /* Reinstall the LIKE and GLOB functions. The variant of LIKE + ** used will be case sensitive or not depending on the RHS. */ - if( db->flags & SQLITE_CountRows ){ - regRowCount = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); + case PragTyp_CASE_SENSITIVE_LIKE: { + if( zRight ){ + sqlite3RegisterLikeFunctions(db, sqlite3GetBoolean(zRight, 0)); + } } + break; - /* If this is not a view, open the table and and all indices */ - if( !isView ){ - int nIdx; +#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX +# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100 +#endif - baseCur = pParse->nTab; - nIdx = sqlite3OpenTableAndIndices(pParse, pTab, baseCur, OP_OpenWrite); - aRegIdx = sqlite3DbMallocRaw(db, sizeof(int)*(nIdx+1)); - if( aRegIdx==0 ){ - goto insert_cleanup; - } - for(i=0; inMem; - } - } +#ifndef SQLITE_OMIT_INTEGRITY_CHECK + /* Pragma "quick_check" is reduced version of + ** integrity_check designed to detect most database corruption + ** without most of the overhead of a full integrity-check. + */ + case PragTyp_INTEGRITY_CHECK: { + int i, j, addr, mxErr; - /* This is the top of the main insertion loop */ - if( useTempTable ){ - /* This block codes the top of loop only. The complete loop is the - ** following pseudocode (template 4): - ** - ** rewind temp table - ** C: loop over rows of intermediate table - ** transfer values form intermediate table into
- ** end loop - ** D: ... - */ - addrInsTop = sqlite3VdbeAddOp1(v, OP_Rewind, srcTab); - addrCont = sqlite3VdbeCurrentAddr(v); - }else if( pSelect ){ - /* This block codes the top of loop only. The complete loop is the - ** following pseudocode (template 3): - ** - ** C: yield X - ** if EOF goto D - ** insert the select result into
from R..R+n - ** goto C - ** D: ... + /* Code that appears at the end of the integrity check. If no error + ** messages have been generated, output OK. Otherwise output the + ** error message */ - addrCont = sqlite3VdbeAddOp1(v, OP_Yield, dest.iParm); - addrInsTop = sqlite3VdbeAddOp1(v, OP_If, regEof); - } + static const int iLn = VDBE_OFFSET_LINENO(2); + static const VdbeOpList endCode[] = { + { OP_IfNeg, 1, 0, 0}, /* 0 */ + { OP_String8, 0, 3, 0}, /* 1 */ + { OP_ResultRow, 3, 1, 0}, + }; - /* Allocate registers for holding the rowid of the new row, - ** the content of the new row, and the assemblied row record. - */ - regRowid = regIns = pParse->nMem+1; - pParse->nMem += pTab->nCol + 1; - if( IsVirtual(pTab) ){ - regRowid++; - pParse->nMem++; - } - regData = regRowid+1; + int isQuick = (sqlite3Tolower(zLeft[0])=='q'); - /* Run the BEFORE and INSTEAD OF triggers, if there are any - */ - endOfLoop = sqlite3VdbeMakeLabel(v); - if( tmask & TRIGGER_BEFORE ){ - int regCols = sqlite3GetTempRange(pParse, pTab->nCol+1); + /* If the PRAGMA command was of the form "PRAGMA .integrity_check", + ** then iDb is set to the index of the database identified by . + ** In this case, the integrity of database iDb only is verified by + ** the VDBE created below. + ** + ** Otherwise, if the command was simply "PRAGMA integrity_check" (or + ** "PRAGMA quick_check"), then iDb is set to 0. In this case, set iDb + ** to -1 here, to indicate that the VDBE should verify the integrity + ** of all attached databases. */ + assert( iDb>=0 ); + assert( iDb==0 || pId2->z ); + if( pId2->z==0 ) iDb = -1; - /* build the NEW.* reference row. Note that if there is an INTEGER - ** PRIMARY KEY into which a NULL is being inserted, that NULL will be - ** translated into a unique ID for the row. But on a BEFORE trigger, - ** we do not know what the unique ID will be (because the insert has - ** not happened yet) so we substitute a rowid of -1 - */ - if( keyColumn<0 ){ - sqlite3VdbeAddOp2(v, OP_Integer, -1, regCols); - }else{ - int j1; - if( useTempTable ){ - sqlite3VdbeAddOp3(v, OP_Column, srcTab, keyColumn, regCols); - }else{ - assert( pSelect==0 ); /* Otherwise useTempTable is true */ - sqlite3ExprCode(pParse, pList->a[keyColumn].pExpr, regCols); + /* Initialize the VDBE program */ + pParse->nMem = 6; + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", SQLITE_STATIC); + + /* Set the maximum error count */ + mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; + if( zRight ){ + sqlite3GetInt32(zRight, &mxErr); + if( mxErr<=0 ){ + mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; } - j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regCols); - sqlite3VdbeAddOp2(v, OP_Integer, -1, regCols); - sqlite3VdbeJumpHere(v, j1); - sqlite3VdbeAddOp1(v, OP_MustBeInt, regCols); } + sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */ - /* Cannot have triggers on a virtual table. If it were possible, - ** this block would have to account for hidden column. - */ - assert( !IsVirtual(pTab) ); + /* Do an integrity check on each database file */ + for(i=0; inDb; i++){ + HashElem *x; + Hash *pTbls; + int cnt = 0; - /* Create the new column data - */ - for(i=0; inCol; i++){ - if( pColumn==0 ){ - j = i; - }else{ - for(j=0; jnId; j++){ - if( pColumn->a[j].idx==i ) break; + if( OMIT_TEMPDB && i==1 ) continue; + if( iDb>=0 && i!=iDb ) continue; + + sqlite3CodeVerifySchema(pParse, i); + addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */ + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); + sqlite3VdbeJumpHere(v, addr); + + /* Do an integrity check of the B-Tree + ** + ** Begin by filling registers 2, 3, ... with the root pages numbers + ** for all tables and indices in the database. + */ + assert( sqlite3SchemaMutexHeld(db, i, 0) ); + pTbls = &db->aDb[i].pSchema->tblHash; + for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ + Table *pTab = sqliteHashData(x); + Index *pIdx; + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp2(v, OP_Integer, pTab->tnum, 2+cnt); + VdbeComment((v, "%s", pTab->zName)); + cnt++; + } + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + sqlite3VdbeAddOp2(v, OP_Integer, pIdx->tnum, 2+cnt); + VdbeComment((v, "%s", pIdx->zName)); + cnt++; } } - if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId) ){ - sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regCols+i+1); - }else if( useTempTable ){ - sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, regCols+i+1); - }else{ - assert( pSelect==0 ); /* Otherwise useTempTable is true */ - sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr, regCols+i+1); - } - } - /* If this is an INSERT on a view with an INSTEAD OF INSERT trigger, - ** do not attempt any conversions before assembling the record. - ** If this is a real table, attempt conversions as required by the - ** table column affinities. - */ - if( !isView ){ - sqlite3VdbeAddOp2(v, OP_Affinity, regCols+1, pTab->nCol); - sqlite3TableAffinityStr(v, pTab); - } + /* Make sure sufficient number of registers have been allocated */ + pParse->nMem = MAX( pParse->nMem, cnt+8 ); - /* Fire BEFORE or INSTEAD OF triggers */ - sqlite3CodeRowTrigger(pParse, pTrigger, TK_INSERT, 0, TRIGGER_BEFORE, - pTab, regCols-pTab->nCol-1, onError, endOfLoop); + /* Do the b-tree integrity checks */ + sqlite3VdbeAddOp3(v, OP_IntegrityCk, 2, cnt, 1); + sqlite3VdbeChangeP5(v, (u8)i); + addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2); VdbeCoverage(v); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, + sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName), + P4_DYNAMIC); + sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2); + sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1); + sqlite3VdbeJumpHere(v, addr); - sqlite3ReleaseTempRange(pParse, regCols, pTab->nCol+1); + /* Make sure all the indices are constructed correctly. + */ + for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){ + Table *pTab = sqliteHashData(x); + Index *pIdx, *pPk; + Index *pPrior = 0; + int loopTop; + int iDataCur, iIdxCur; + int r1 = -1; + + if( pTab->pIndex==0 ) continue; + pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); + addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */ + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); + sqlite3VdbeJumpHere(v, addr); + sqlite3ExprCacheClear(pParse); + sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenRead, + 1, 0, &iDataCur, &iIdxCur); + sqlite3VdbeAddOp2(v, OP_Integer, 0, 7); + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + sqlite3VdbeAddOp2(v, OP_Integer, 0, 8+j); /* index entries counter */ + } + pParse->nMem = MAX(pParse->nMem, 8+j); + sqlite3VdbeAddOp2(v, OP_Rewind, iDataCur, 0); VdbeCoverage(v); + loopTop = sqlite3VdbeAddOp2(v, OP_AddImm, 7, 1); + /* Verify that all NOT NULL columns really are NOT NULL */ + for(j=0; jnCol; j++){ + char *zErr; + int jmp2, jmp3; + if( j==pTab->iPKey ) continue; + if( pTab->aCol[j].notNull==0 ) continue; + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, j, 3); + sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); + jmp2 = sqlite3VdbeAddOp1(v, OP_NotNull, 3); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ + zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName, + pTab->aCol[j].zName); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); + jmp3 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); + sqlite3VdbeAddOp0(v, OP_Halt); + sqlite3VdbeJumpHere(v, jmp2); + sqlite3VdbeJumpHere(v, jmp3); + } + /* Validate index entries for the current row */ + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + int jmp2, jmp3, jmp4, jmp5; + int ckUniq = sqlite3VdbeMakeLabel(v); + if( pPk==pIdx ) continue; + r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, + pPrior, r1); + pPrior = pIdx; + sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1); /* increment entry count */ + /* Verify that an index entry exists for the current table row */ + jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, + pIdx->nColumn); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, "row ", P4_STATIC); + sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); + sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, + " missing from index ", P4_STATIC); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + jmp5 = sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, + pIdx->zName, P4_TRANSIENT); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); + jmp4 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); + sqlite3VdbeAddOp0(v, OP_Halt); + sqlite3VdbeJumpHere(v, jmp2); + /* For UNIQUE indexes, verify that only one entry exists with the + ** current key. The entry is unique if (1) any column is NULL + ** or (2) the next entry has a different key */ + if( IsUniqueIndex(pIdx) ){ + int uniqOk = sqlite3VdbeMakeLabel(v); + int jmp6; + int kk; + for(kk=0; kknKeyCol; kk++){ + int iCol = pIdx->aiColumn[kk]; + assert( iCol>=0 && iColnCol ); + if( pTab->aCol[iCol].notNull ) continue; + sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); + VdbeCoverage(v); + } + jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, uniqOk); + sqlite3VdbeJumpHere(v, jmp6); + sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, + pIdx->nKeyCol); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, + "non-unique entry in index ", P4_STATIC); + sqlite3VdbeAddOp2(v, OP_Goto, 0, jmp5); + sqlite3VdbeResolveLabel(v, uniqOk); + } + sqlite3VdbeJumpHere(v, jmp4); + sqlite3ResolvePartIdxLabel(pParse, jmp3); + } + sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, loopTop-1); +#ifndef SQLITE_OMIT_BTREECOUNT + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, + "wrong # of entries in index ", P4_STATIC); + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + if( pPk==pIdx ) continue; + addr = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr+2); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); + sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3); + sqlite3VdbeAddOp3(v, OP_Eq, 8+j, addr+8, 3); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pIdx->zName, P4_TRANSIENT); + sqlite3VdbeAddOp3(v, OP_Concat, 3, 2, 7); + sqlite3VdbeAddOp2(v, OP_ResultRow, 7, 1); + } +#endif /* SQLITE_OMIT_BTREECOUNT */ + } + } + addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn); + sqlite3VdbeChangeP3(v, addr, -mxErr); + sqlite3VdbeJumpHere(v, addr); + sqlite3VdbeChangeP4(v, addr+1, "ok", P4_STATIC); } + break; +#endif /* SQLITE_OMIT_INTEGRITY_CHECK */ - /* Push the record number for the new entry onto the stack. The - ** record number is a randomly generate integer created by NewRowid - ** except when the table has an INTEGER PRIMARY KEY column, in which - ** case the record number is the same as that column. +#ifndef SQLITE_OMIT_UTF16 + /* + ** PRAGMA encoding + ** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be" + ** + ** In its first form, this pragma returns the encoding of the main + ** database. If the database is not initialized, it is initialized now. + ** + ** The second form of this pragma is a no-op if the main database file + ** has not already been initialized. In this case it sets the default + ** encoding that will be used for the main database file if a new file + ** is created. If an existing main database file is opened, then the + ** default text encoding for the existing database is used. + ** + ** In all cases new databases created using the ATTACH command are + ** created to use the same default text encoding as the main database. If + ** the main database has not been initialized and/or created when ATTACH + ** is executed, this is done before the ATTACH operation. + ** + ** In the second form this pragma sets the text encoding to be used in + ** new database files created using this database handle. It is only + ** useful if invoked immediately after the main database i */ - if( !isView ){ - if( IsVirtual(pTab) ){ - /* The row that the VUpdate opcode will delete: none */ - sqlite3VdbeAddOp2(v, OP_Null, 0, regIns); - } - if( keyColumn>=0 ){ - if( useTempTable ){ - sqlite3VdbeAddOp3(v, OP_Column, srcTab, keyColumn, regRowid); - }else if( pSelect ){ - sqlite3VdbeAddOp2(v, OP_SCopy, regFromSelect+keyColumn, regRowid); - }else{ - VdbeOp *pOp; - sqlite3ExprCode(pParse, pList->a[keyColumn].pExpr, regRowid); - pOp = sqlite3VdbeGetOp(v, -1); - if( ALWAYS(pOp) && pOp->opcode==OP_Null && !IsVirtual(pTab) ){ - appendFlag = 1; - pOp->opcode = OP_NewRowid; - pOp->p1 = baseCur; - pOp->p2 = regRowid; - pOp->p3 = regAutoinc; - } - } - /* If the PRIMARY KEY expression is NULL, then use OP_NewRowid - ** to generate a unique primary key value. + case PragTyp_ENCODING: { + static const struct EncName { + char *zName; + u8 enc; + } encnames[] = { + { "UTF8", SQLITE_UTF8 }, + { "UTF-8", SQLITE_UTF8 }, /* Must be element [1] */ + { "UTF-16le", SQLITE_UTF16LE }, /* Must be element [2] */ + { "UTF-16be", SQLITE_UTF16BE }, /* Must be element [3] */ + { "UTF16le", SQLITE_UTF16LE }, + { "UTF16be", SQLITE_UTF16BE }, + { "UTF-16", 0 }, /* SQLITE_UTF16NATIVE */ + { "UTF16", 0 }, /* SQLITE_UTF16NATIVE */ + { 0, 0 } + }; + const struct EncName *pEnc; + if( !zRight ){ /* "PRAGMA encoding" */ + if( sqlite3ReadSchema(pParse) ) goto pragma_out; + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", SQLITE_STATIC); + sqlite3VdbeAddOp2(v, OP_String8, 0, 1); + assert( encnames[SQLITE_UTF8].enc==SQLITE_UTF8 ); + assert( encnames[SQLITE_UTF16LE].enc==SQLITE_UTF16LE ); + assert( encnames[SQLITE_UTF16BE].enc==SQLITE_UTF16BE ); + sqlite3VdbeChangeP4(v, -1, encnames[ENC(pParse->db)].zName, P4_STATIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); + }else{ /* "PRAGMA encoding = XXX" */ + /* Only change the value of sqlite.enc if the database handle is not + ** initialized. If the main database exists, the new sqlite.enc value + ** will be overwritten when the schema is next loaded. If it does not + ** already exists, it will be created to use the new encoding value. */ - if( !appendFlag ){ - int j1; - if( !IsVirtual(pTab) ){ - j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regRowid); - sqlite3VdbeAddOp3(v, OP_NewRowid, baseCur, regRowid, regAutoinc); - sqlite3VdbeJumpHere(v, j1); - }else{ - j1 = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp2(v, OP_IsNull, regRowid, j1+2); + if( + !(DbHasProperty(db, 0, DB_SchemaLoaded)) || + DbHasProperty(db, 0, DB_Empty) + ){ + for(pEnc=&encnames[0]; pEnc->zName; pEnc++){ + if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){ + ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE; + break; + } + } + if( !pEnc->zName ){ + sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight); } - sqlite3VdbeAddOp1(v, OP_MustBeInt, regRowid); } - }else if( IsVirtual(pTab) ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, regRowid); + } + } + break; +#endif /* SQLITE_OMIT_UTF16 */ + +#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS + /* + ** PRAGMA [database.]schema_version + ** PRAGMA [database.]schema_version = + ** + ** PRAGMA [database.]user_version + ** PRAGMA [database.]user_version = + ** + ** PRAGMA [database.]freelist_count = + ** + ** PRAGMA [database.]application_id + ** PRAGMA [database.]application_id = + ** + ** The pragma's schema_version and user_version are used to set or get + ** the value of the schema-version and user-version, respectively. Both + ** the schema-version and the user-version are 32-bit signed integers + ** stored in the database header. + ** + ** The schema-cookie is usually only manipulated internally by SQLite. It + ** is incremented by SQLite whenever the database schema is modified (by + ** creating or dropping a table or index). The schema version is used by + ** SQLite each time a query is executed to ensure that the internal cache + ** of the schema used when compiling the SQL query matches the schema of + ** the database against which the compiled query is actually executed. + ** Subverting this mechanism by using "PRAGMA schema_version" to modify + ** the schema-version is potentially dangerous and may lead to program + ** crashes or database corruption. Use with caution! + ** + ** The user-version is not used internally by SQLite. It may be used by + ** applications for any purpose. + */ + case PragTyp_HEADER_VALUE: { + int iCookie; /* Cookie index. 1 for schema-cookie, 6 for user-cookie. */ + sqlite3VdbeUsesBtree(v, iDb); + switch( zLeft[0] ){ + case 'a': case 'A': + iCookie = BTREE_APPLICATION_ID; + break; + case 'f': case 'F': + iCookie = BTREE_FREE_PAGE_COUNT; + break; + case 's': case 'S': + iCookie = BTREE_SCHEMA_VERSION; + break; + default: + iCookie = BTREE_USER_VERSION; + break; + } + + if( zRight && iCookie!=BTREE_FREE_PAGE_COUNT ){ + /* Write the specified cookie value */ + static const VdbeOpList setCookie[] = { + { OP_Transaction, 0, 1, 0}, /* 0 */ + { OP_Integer, 0, 1, 0}, /* 1 */ + { OP_SetCookie, 0, 0, 1}, /* 2 */ + }; + int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie, 0); + sqlite3VdbeChangeP1(v, addr, iDb); + sqlite3VdbeChangeP1(v, addr+1, sqlite3Atoi(zRight)); + sqlite3VdbeChangeP1(v, addr+2, iDb); + sqlite3VdbeChangeP2(v, addr+2, iCookie); }else{ - sqlite3VdbeAddOp3(v, OP_NewRowid, baseCur, regRowid, regAutoinc); - appendFlag = 1; + /* Read the specified cookie value */ + static const VdbeOpList readCookie[] = { + { OP_Transaction, 0, 0, 0}, /* 0 */ + { OP_ReadCookie, 0, 1, 0}, /* 1 */ + { OP_ResultRow, 1, 1, 0} + }; + int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie, 0); + sqlite3VdbeChangeP1(v, addr, iDb); + sqlite3VdbeChangeP1(v, addr+1, iDb); + sqlite3VdbeChangeP3(v, addr+1, iCookie); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); } - autoIncStep(pParse, regAutoinc, regRowid); + } + break; +#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */ - /* Push onto the stack, data for all columns of the new entry, beginning - ** with the first column. - */ - nHidden = 0; - for(i=0; inCol; i++){ - int iRegStore = regRowid+1+i; - if( i==pTab->iPKey ){ - /* The value of the INTEGER PRIMARY KEY column is always a NULL. - ** Whenever this column is read, the record number will be substituted - ** in its place. So will fill this column with a NULL to avoid - ** taking up data space with information that will never be used. */ - sqlite3VdbeAddOp2(v, OP_Null, 0, iRegStore); - continue; - } - if( pColumn==0 ){ - if( IsHiddenColumn(&pTab->aCol[i]) ){ - assert( IsVirtual(pTab) ); - j = -1; - nHidden++; - }else{ - j = i - nHidden; - } - }else{ - for(j=0; jnId; j++){ - if( pColumn->a[j].idx==i ) break; - } - } - if( j<0 || nColumn==0 || (pColumn && j>=pColumn->nId) ){ - sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, iRegStore); - }else if( useTempTable ){ - sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, iRegStore); - }else if( pSelect ){ - sqlite3VdbeAddOp2(v, OP_SCopy, regFromSelect+j, iRegStore); - }else{ - sqlite3ExprCode(pParse, pList->a[j].pExpr, iRegStore); - } +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS + /* + ** PRAGMA compile_options + ** + ** Return the names of all compile-time options used in this build, + ** one option per row. + */ + case PragTyp_COMPILE_OPTIONS: { + int i = 0; + const char *zOpt; + sqlite3VdbeSetNumCols(v, 1); + pParse->nMem = 1; + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "compile_option", SQLITE_STATIC); + while( (zOpt = sqlite3_compileoption_get(i++))!=0 ){ + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, zOpt, 0); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); } + } + break; +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - /* Generate code to check constraints and generate index keys and - ** do the insertion. - */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTab) ){ - const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); - sqlite3VtabMakeWritable(pParse, pTab); - sqlite3VdbeAddOp4(v, OP_VUpdate, 1, pTab->nCol+2, regIns, pVTab, P4_VTAB); - sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError); - sqlite3MayAbort(pParse); - }else -#endif - { - int isReplace; /* Set to true if constraints may cause a replace */ - sqlite3GenerateConstraintChecks(pParse, pTab, baseCur, regIns, aRegIdx, - keyColumn>=0, 0, onError, endOfLoop, &isReplace - ); - sqlite3FkCheck(pParse, pTab, 0, regIns); - sqlite3CompleteInsertion( - pParse, pTab, baseCur, regIns, aRegIdx, 0, appendFlag, isReplace==0 - ); +#ifndef SQLITE_OMIT_WAL + /* + ** PRAGMA [database.]wal_checkpoint = passive|full|restart + ** + ** Checkpoint the database. + */ + case PragTyp_WAL_CHECKPOINT: { + int iBt = (pId2->z?iDb:SQLITE_MAX_ATTACHED); + int eMode = SQLITE_CHECKPOINT_PASSIVE; + if( zRight ){ + if( sqlite3StrICmp(zRight, "full")==0 ){ + eMode = SQLITE_CHECKPOINT_FULL; + }else if( sqlite3StrICmp(zRight, "restart")==0 ){ + eMode = SQLITE_CHECKPOINT_RESTART; + } } + sqlite3VdbeSetNumCols(v, 3); + pParse->nMem = 3; + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "busy", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "log", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "checkpointed", SQLITE_STATIC); + + sqlite3VdbeAddOp3(v, OP_Checkpoint, iBt, eMode, 1); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); } + break; - /* Update the count of rows that are inserted + /* + ** PRAGMA wal_autocheckpoint + ** PRAGMA wal_autocheckpoint = N + ** + ** Configure a database connection to automatically checkpoint a database + ** after accumulating N frames in the log. Or query for the current value + ** of N. */ - if( (db->flags & SQLITE_CountRows)!=0 ){ - sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); + case PragTyp_WAL_AUTOCHECKPOINT: { + if( zRight ){ + sqlite3_wal_autocheckpoint(db, sqlite3Atoi(zRight)); + } + returnSingleInt(pParse, "wal_autocheckpoint", + db->xWalCallback==sqlite3WalDefaultHook ? + SQLITE_PTR_TO_INT(db->pWalArg) : 0); } + break; +#endif - if( pTrigger ){ - /* Code AFTER triggers */ - sqlite3CodeRowTrigger(pParse, pTrigger, TK_INSERT, 0, TRIGGER_AFTER, - pTab, regData-2-pTab->nCol, onError, endOfLoop); + /* + ** PRAGMA shrink_memory + ** + ** This pragma attempts to free as much memory as possible from the + ** current database connection. + */ + case PragTyp_SHRINK_MEMORY: { + sqlite3_db_release_memory(db); + break; } - /* The bottom of the main insertion loop, if the data source - ** is a SELECT statement. + /* + ** PRAGMA busy_timeout + ** PRAGMA busy_timeout = N + ** + ** Call sqlite3_busy_timeout(db, N). Return the current timeout value + ** if one is set. If no busy handler or a different busy handler is set + ** then 0 is returned. Setting the busy_timeout to 0 or negative + ** disables the timeout. */ - sqlite3VdbeResolveLabel(v, endOfLoop); - if( useTempTable ){ - sqlite3VdbeAddOp2(v, OP_Next, srcTab, addrCont); - sqlite3VdbeJumpHere(v, addrInsTop); - sqlite3VdbeAddOp1(v, OP_Close, srcTab); - }else if( pSelect ){ - sqlite3VdbeAddOp2(v, OP_Goto, 0, addrCont); - sqlite3VdbeJumpHere(v, addrInsTop); + /*case PragTyp_BUSY_TIMEOUT*/ default: { + assert( aPragmaNames[mid].ePragTyp==PragTyp_BUSY_TIMEOUT ); + if( zRight ){ + sqlite3_busy_timeout(db, sqlite3Atoi(zRight)); + } + returnSingleInt(pParse, "timeout", db->busyTimeout); + break; } - if( !IsVirtual(pTab) && !isView ){ - /* Close all tables opened */ - sqlite3VdbeAddOp1(v, OP_Close, baseCur); - for(idx=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, idx++){ - sqlite3VdbeAddOp1(v, OP_Close, idx+baseCur); + /* + ** PRAGMA soft_heap_limit + ** PRAGMA soft_heap_limit = N + ** + ** Call sqlite3_soft_heap_limit64(N). Return the result. If N is omitted, + ** use -1. + */ + case PragTyp_SOFT_HEAP_LIMIT: { + sqlite3_int64 N; + if( zRight && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK ){ + sqlite3_soft_heap_limit64(N); } + returnSingleInt(pParse, "soft_heap_limit", sqlite3_soft_heap_limit64(-1)); + break; } -insert_end: - /* Update the sqlite_sequence table by storing the content of the - ** maximum rowid counter values recorded while inserting into - ** autoincrement tables. - */ - if( pParse->nested==0 && pParse->pTriggerTab==0 ){ - sqlite3AutoincrementEnd(pParse); + /* + ** PRAGMA threads + ** PRAGMA threads = N + ** + ** Configure the maximum number of worker threads. Return the new + ** maximum, which might be less than requested. + */ + case PragTyp_THREADS: { + sqlite3_int64 N; + if( zRight + && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK + && N>=0 + ){ + sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, (int)(N&0x7fffffff)); + } + returnSingleInt(pParse, "threads", + sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1)); + break; } +#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) /* - ** Return the number of rows inserted. If this routine is - ** generating code because of a call to sqlite3NestedParse(), do not - ** invoke the callback function. + ** Report the current state of file logs for all databases */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ - sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows inserted", SQLITE_STATIC); + case PragTyp_LOCK_STATUS: { + static const char *const azLockName[] = { + "unlocked", "shared", "reserved", "pending", "exclusive" + }; + int i; + sqlite3VdbeSetNumCols(v, 2); + pParse->nMem = 2; + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", SQLITE_STATIC); + sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", SQLITE_STATIC); + for(i=0; inDb; i++){ + Btree *pBt; + const char *zState = "unknown"; + int j; + if( db->aDb[i].zName==0 ) continue; + sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, db->aDb[i].zName, P4_STATIC); + pBt = db->aDb[i].pBt; + if( pBt==0 || sqlite3BtreePager(pBt)==0 ){ + zState = "closed"; + }else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0, + SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){ + zState = azLockName[j]; + } + sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, zState, P4_STATIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); + } + break; } +#endif -insert_cleanup: - sqlite3SrcListDelete(db, pTabList); - sqlite3ExprListDelete(db, pList); - sqlite3SelectDelete(db, pSelect); - sqlite3IdListDelete(db, pColumn); - sqlite3DbFree(db, aRegIdx); -} - -/* Make sure "isView" and other macros defined above are undefined. Otherwise -** thely may interfere with compilation of other functions in this file -** (or in another file, if this file becomes part of the amalgamation). */ -#ifdef isView - #undef isView +#ifdef SQLITE_HAS_CODEC + case PragTyp_KEY: { + if( zRight ) sqlite3_key_v2(db, zDb, zRight, sqlite3Strlen30(zRight)); + break; + } + case PragTyp_REKEY: { + if( zRight ) sqlite3_rekey_v2(db, zDb, zRight, sqlite3Strlen30(zRight)); + break; + } + case PragTyp_HEXKEY: { + if( zRight ){ + u8 iByte; + int i; + char zKey[40]; + for(i=0, iByte=0; idb; + if( !db->mallocFailed && (db->flags & SQLITE_RecoveryMode)==0 ){ + if( zObj==0 ) zObj = "?"; + sqlite3SetString(pData->pzErrMsg, db, + "malformed database schema (%s)", zObj); + if( zExtra ){ + *pData->pzErrMsg = sqlite3MAppendf(db, *pData->pzErrMsg, + "%s - %s", *pData->pzErrMsg, zExtra); + } + } + pData->rc = db->mallocFailed ? SQLITE_NOMEM : SQLITE_CORRUPT_BKPT; +} + +/* +** This is the callback routine for the code that initializes the +** database. See sqlite3Init() below for additional information. +** This routine is also called from the OP_ParseSchema opcode of the VDBE. ** -** CHECK REPLACE Illegal. The results in an exception. +** Each callback contains the following information: ** -** Which action to take is determined by the overrideError parameter. -** Or if overrideError==OE_Default, then the pParse->onError parameter -** is used. Or if pParse->onError==OE_Default then the onError value -** for the constraint is used. +** argv[0] = name of thing being created +** argv[1] = root page number for table or index. 0 for trigger or view. +** argv[2] = SQL text for the CREATE statement. ** -** The calling routine must open a read/write cursor for pTab with -** cursor number "baseCur". All indices of pTab must also have open -** read/write cursors with cursor number baseCur+i for the i-th cursor. -** Except, if there is no possibility of a REPLACE action then -** cursors do not need to be open for indices where aRegIdx[i]==0. */ -SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( - Parse *pParse, /* The parser context */ - Table *pTab, /* the table into which we are inserting */ - int baseCur, /* Index of a read/write cursor pointing at pTab */ - int regRowid, /* Index of the range of input registers */ - int *aRegIdx, /* Register used by each index. 0 for unused indices */ - int rowidChng, /* True if the rowid might collide with existing entry */ - int isUpdate, /* True for UPDATE, False for INSERT */ - int overrideError, /* Override onError to this if not OE_Default */ - int ignoreDest, /* Jump to this label on an OE_Ignore resolution */ - int *pbMayReplace /* OUT: Set to true if constraint may cause a replace */ -){ - int i; /* loop counter */ - Vdbe *v; /* VDBE under constrution */ - int nCol; /* Number of columns */ - int onError; /* Conflict resolution strategy */ - int j1; /* Addresss of jump instruction */ - int j2 = 0, j3; /* Addresses of jump instructions */ - int regData; /* Register containing first data column */ - int iCur; /* Table cursor number */ - Index *pIdx; /* Pointer to one of the indices */ - int seenReplace = 0; /* True if REPLACE is used to resolve INT PK conflict */ - int regOldRowid = (rowidChng && isUpdate) ? rowidChng : regRowid; +SQLITE_PRIVATE int sqlite3InitCallback(void *pInit, int argc, char **argv, char **NotUsed){ + InitData *pData = (InitData*)pInit; + sqlite3 *db = pData->db; + int iDb = pData->iDb; - v = sqlite3GetVdbe(pParse); - assert( v!=0 ); - assert( pTab->pSelect==0 ); /* This table is not a VIEW */ - nCol = pTab->nCol; - regData = regRowid + 1; + assert( argc==3 ); + UNUSED_PARAMETER2(NotUsed, argc); + assert( sqlite3_mutex_held(db->mutex) ); + DbClearProperty(db, iDb, DB_Empty); + if( db->mallocFailed ){ + corruptSchema(pData, argv[0], 0); + return 1; + } - /* Test all NOT NULL constraints. - */ - for(i=0; iiPKey ){ - continue; - } - onError = pTab->aCol[i].notNull; - if( onError==OE_None ) continue; - if( overrideError!=OE_Default ){ - onError = overrideError; - }else if( onError==OE_Default ){ - onError = OE_Abort; - } - if( onError==OE_Replace && pTab->aCol[i].pDflt==0 ){ - onError = OE_Abort; - } - assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail - || onError==OE_Ignore || onError==OE_Replace ); - switch( onError ){ - case OE_Abort: - sqlite3MayAbort(pParse); - case OE_Rollback: - case OE_Fail: { - char *zMsg; - sqlite3VdbeAddOp3(v, OP_HaltIfNull, - SQLITE_CONSTRAINT, onError, regData+i); - zMsg = sqlite3MPrintf(pParse->db, "%s.%s may not be NULL", - pTab->zName, pTab->aCol[i].zName); - sqlite3VdbeChangeP4(v, -1, zMsg, P4_DYNAMIC); - break; - } - case OE_Ignore: { - sqlite3VdbeAddOp2(v, OP_IsNull, regData+i, ignoreDest); - break; - } - default: { - assert( onError==OE_Replace ); - j1 = sqlite3VdbeAddOp1(v, OP_NotNull, regData+i); - sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regData+i); - sqlite3VdbeJumpHere(v, j1); - break; + assert( iDb>=0 && iDbnDb ); + if( argv==0 ) return 0; /* Might happen if EMPTY_RESULT_CALLBACKS are on */ + if( argv[1]==0 ){ + corruptSchema(pData, argv[0], 0); + }else if( argv[2] && argv[2][0] ){ + /* Call the parser to process a CREATE TABLE, INDEX or VIEW. + ** But because db->init.busy is set to 1, no VDBE code is generated + ** or executed. All the parser does is build the internal data + ** structures that describe the table, index, or view. + */ + int rc; + sqlite3_stmt *pStmt; + TESTONLY(int rcp); /* Return code from sqlite3_prepare() */ + + assert( db->init.busy ); + db->init.iDb = iDb; + db->init.newTnum = sqlite3Atoi(argv[1]); + db->init.orphanTrigger = 0; + TESTONLY(rcp = ) sqlite3_prepare(db, argv[2], -1, &pStmt, 0); + rc = db->errCode; + assert( (rc&0xFF)==(rcp&0xFF) ); + db->init.iDb = 0; + if( SQLITE_OK!=rc ){ + if( db->init.orphanTrigger ){ + assert( iDb==1 ); + }else{ + pData->rc = rc; + if( rc==SQLITE_NOMEM ){ + db->mallocFailed = 1; + }else if( rc!=SQLITE_INTERRUPT && (rc&0xFF)!=SQLITE_LOCKED ){ + corruptSchema(pData, argv[0], sqlite3_errmsg(db)); + } } } + sqlite3_finalize(pStmt); + }else if( argv[0]==0 ){ + corruptSchema(pData, 0, 0); + }else{ + /* If the SQL column is blank it means this is an index that + ** was created to be the PRIMARY KEY or to fulfill a UNIQUE + ** constraint for a CREATE TABLE. The index should have already + ** been created when we processed the CREATE TABLE. All we have + ** to do here is record the root page number for that index. + */ + Index *pIndex; + pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zName); + if( pIndex==0 ){ + /* This can occur if there exists an index on a TEMP table which + ** has the same name as another index on a permanent index. Since + ** the permanent table is hidden by the TEMP table, we can also + ** safely ignore the index on the permanent table. + */ + /* Do Nothing */; + }else if( sqlite3GetInt32(argv[1], &pIndex->tnum)==0 ){ + corruptSchema(pData, argv[0], "invalid rootpage"); + } + } + return 0; +} + +/* +** Attempt to read the database schema and initialize internal +** data structures for a single database file. The index of the +** database file is given by iDb. iDb==0 is used for the main +** database. iDb==1 should never be used. iDb>=2 is used for +** auxiliary databases. Return one of the SQLITE_ error codes to +** indicate success or failure. +*/ +static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ + int rc; + int i; +#ifndef SQLITE_OMIT_DEPRECATED + int size; +#endif + Table *pTab; + Db *pDb; + char const *azArg[4]; + int meta[5]; + InitData initData; + char const *zMasterSchema; + char const *zMasterName; + int openedTransaction = 0; + + /* + ** The master database table has a structure like this + */ + static const char master_schema[] = + "CREATE TABLE sqlite_master(\n" + " type text,\n" + " name text,\n" + " tbl_name text,\n" + " rootpage integer,\n" + " sql text\n" + ")" + ; +#ifndef SQLITE_OMIT_TEMPDB + static const char temp_master_schema[] = + "CREATE TEMP TABLE sqlite_temp_master(\n" + " type text,\n" + " name text,\n" + " tbl_name text,\n" + " rootpage integer,\n" + " sql text\n" + ")" + ; +#else + #define temp_master_schema 0 +#endif + + assert( iDb>=0 && iDbnDb ); + assert( db->aDb[iDb].pSchema ); + assert( sqlite3_mutex_held(db->mutex) ); + assert( iDb==1 || sqlite3BtreeHoldsMutex(db->aDb[iDb].pBt) ); + + /* zMasterSchema and zInitScript are set to point at the master schema + ** and initialisation script appropriate for the database being + ** initialized. zMasterName is the name of the master table. + */ + if( !OMIT_TEMPDB && iDb==1 ){ + zMasterSchema = temp_master_schema; + }else{ + zMasterSchema = master_schema; + } + zMasterName = SCHEMA_TABLE(iDb); + + /* Construct the schema tables. */ + azArg[0] = zMasterName; + azArg[1] = "1"; + azArg[2] = zMasterSchema; + azArg[3] = 0; + initData.db = db; + initData.iDb = iDb; + initData.rc = SQLITE_OK; + initData.pzErrMsg = pzErrMsg; + sqlite3InitCallback(&initData, 3, (char **)azArg, 0); + if( initData.rc ){ + rc = initData.rc; + goto error_out; + } + pTab = sqlite3FindTable(db, zMasterName, db->aDb[iDb].zName); + if( ALWAYS(pTab) ){ + pTab->tabFlags |= TF_Readonly; } - /* Test all CHECK constraints + /* Create a cursor to hold the database open */ -#ifndef SQLITE_OMIT_CHECK - if( pTab->pCheck && (pParse->db->flags & SQLITE_IgnoreChecks)==0 ){ - int allOk = sqlite3VdbeMakeLabel(v); - pParse->ckBase = regData; - sqlite3ExprIfTrue(pParse, pTab->pCheck, allOk, SQLITE_JUMPIFNULL); - onError = overrideError!=OE_Default ? overrideError : OE_Abort; - if( onError==OE_Ignore ){ - sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); - }else{ - if( onError==OE_Replace ) onError = OE_Abort; /* IMP: R-15569-63625 */ - sqlite3HaltConstraint(pParse, onError, 0, 0); + pDb = &db->aDb[iDb]; + if( pDb->pBt==0 ){ + if( !OMIT_TEMPDB && ALWAYS(iDb==1) ){ + DbSetProperty(db, 1, DB_SchemaLoaded); } - sqlite3VdbeResolveLabel(v, allOk); + return SQLITE_OK; } -#endif /* !defined(SQLITE_OMIT_CHECK) */ - /* If we have an INTEGER PRIMARY KEY, make sure the primary key - ** of the new record does not previously exist. Except, if this - ** is an UPDATE and the primary key is not changing, that is OK. - */ - if( rowidChng ){ - onError = pTab->keyConf; - if( overrideError!=OE_Default ){ - onError = overrideError; - }else if( onError==OE_Default ){ - onError = OE_Abort; - } - - if( isUpdate ){ - j2 = sqlite3VdbeAddOp3(v, OP_Eq, regRowid, 0, rowidChng); - } - j3 = sqlite3VdbeAddOp3(v, OP_NotExists, baseCur, 0, regRowid); - switch( onError ){ - default: { - onError = OE_Abort; - /* Fall thru into the next case */ - } - case OE_Rollback: - case OE_Abort: - case OE_Fail: { - sqlite3HaltConstraint( - pParse, onError, "PRIMARY KEY must be unique", P4_STATIC); - break; - } - case OE_Replace: { - /* If there are DELETE triggers on this table and the - ** recursive-triggers flag is set, call GenerateRowDelete() to - ** remove the conflicting row from the the table. This will fire - ** the triggers and remove both the table and index b-tree entries. - ** - ** Otherwise, if there are no triggers or the recursive-triggers - ** flag is not set, but the table has one or more indexes, call - ** GenerateRowIndexDelete(). This removes the index b-tree entries - ** only. The table b-tree entry will be replaced by the new entry - ** when it is inserted. - ** - ** If either GenerateRowDelete() or GenerateRowIndexDelete() is called, - ** also invoke MultiWrite() to indicate that this VDBE may require - ** statement rollback (if the statement is aborted after the delete - ** takes place). Earlier versions called sqlite3MultiWrite() regardless, - ** but being more selective here allows statements like: - ** - ** REPLACE INTO t(rowid) VALUES($newrowid) - ** - ** to run without a statement journal if there are no indexes on the - ** table. - */ - Trigger *pTrigger = 0; - if( pParse->db->flags&SQLITE_RecTriggers ){ - pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); - } - if( pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0) ){ - sqlite3MultiWrite(pParse); - sqlite3GenerateRowDelete( - pParse, pTab, baseCur, regRowid, 0, pTrigger, OE_Replace - ); - }else if( pTab->pIndex ){ - sqlite3MultiWrite(pParse); - sqlite3GenerateRowIndexDelete(pParse, pTab, baseCur, 0); - } - seenReplace = 1; - break; - } - case OE_Ignore: { - assert( seenReplace==0 ); - sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); - break; - } - } - sqlite3VdbeJumpHere(v, j3); - if( isUpdate ){ - sqlite3VdbeJumpHere(v, j2); + /* If there is not already a read-only (or read-write) transaction opened + ** on the b-tree database, open one now. If a transaction is opened, it + ** will be closed before this function returns. */ + sqlite3BtreeEnter(pDb->pBt); + if( !sqlite3BtreeIsInReadTrans(pDb->pBt) ){ + rc = sqlite3BtreeBeginTrans(pDb->pBt, 0); + if( rc!=SQLITE_OK ){ + sqlite3SetString(pzErrMsg, db, "%s", sqlite3ErrStr(rc)); + goto initone_error_out; } + openedTransaction = 1; } - /* Test all UNIQUE constraints by creating entries for each UNIQUE - ** index and making sure that duplicate entries do not already exist. - ** Add the new records to the indices as we go. + /* Get the database meta information. + ** + ** Meta values are as follows: + ** meta[0] Schema cookie. Changes with each schema change. + ** meta[1] File format of schema layer. + ** meta[2] Size of the page cache. + ** meta[3] Largest rootpage (auto/incr_vacuum mode) + ** meta[4] Db text encoding. 1:UTF-8 2:UTF-16LE 3:UTF-16BE + ** meta[5] User version + ** meta[6] Incremental vacuum mode + ** meta[7] unused + ** meta[8] unused + ** meta[9] unused + ** + ** Note: The #defined SQLITE_UTF* symbols in sqliteInt.h correspond to + ** the possible values of meta[4]. */ - for(iCur=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, iCur++){ - int regIdx; - int regR; - - if( aRegIdx[iCur]==0 ) continue; /* Skip unused indices */ + for(i=0; ipBt, i+1, (u32 *)&meta[i]); + } + pDb->pSchema->schema_cookie = meta[BTREE_SCHEMA_VERSION-1]; - /* Create a key for accessing the index entry */ - regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn+1); - for(i=0; inColumn; i++){ - int idx = pIdx->aiColumn[i]; - if( idx==pTab->iPKey ){ - sqlite3VdbeAddOp2(v, OP_SCopy, regRowid, regIdx+i); - }else{ - sqlite3VdbeAddOp2(v, OP_SCopy, regData+idx, regIdx+i); + /* If opening a non-empty database, check the text encoding. For the + ** main database, set sqlite3.enc to the encoding of the main database. + ** For an attached db, it is an error if the encoding is not the same + ** as sqlite3.enc. + */ + if( meta[BTREE_TEXT_ENCODING-1] ){ /* text encoding */ + if( iDb==0 ){ +#ifndef SQLITE_OMIT_UTF16 + u8 encoding; + /* If opening the main database, set ENC(db). */ + encoding = (u8)meta[BTREE_TEXT_ENCODING-1] & 3; + if( encoding==0 ) encoding = SQLITE_UTF8; + ENC(db) = encoding; +#else + ENC(db) = SQLITE_UTF8; +#endif + }else{ + /* If opening an attached database, the encoding much match ENC(db) */ + if( meta[BTREE_TEXT_ENCODING-1]!=ENC(db) ){ + sqlite3SetString(pzErrMsg, db, "attached databases must use the same" + " text encoding as main database"); + rc = SQLITE_ERROR; + goto initone_error_out; } } - sqlite3VdbeAddOp2(v, OP_SCopy, regRowid, regIdx+i); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn+1, aRegIdx[iCur]); - sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v, pIdx), P4_TRANSIENT); - sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn+1); + }else{ + DbSetProperty(db, iDb, DB_Empty); + } + pDb->pSchema->enc = ENC(db); - /* Find out what action to take in case there is an indexing conflict */ - onError = pIdx->onError; - if( onError==OE_None ){ - sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn+1); - continue; /* pIdx is not a UNIQUE index */ - } - if( overrideError!=OE_Default ){ - onError = overrideError; - }else if( onError==OE_Default ){ - onError = OE_Abort; - } - if( seenReplace ){ - if( onError==OE_Ignore ) onError = OE_Replace; - else if( onError==OE_Fail ) onError = OE_Abort; - } - - /* Check to see if the new index entry will be unique */ - regR = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_SCopy, regOldRowid, regR); - j3 = sqlite3VdbeAddOp4(v, OP_IsUnique, baseCur+iCur+1, 0, - regR, SQLITE_INT_TO_PTR(regIdx), - P4_INT32); - sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn+1); + if( pDb->pSchema->cache_size==0 ){ +#ifndef SQLITE_OMIT_DEPRECATED + size = sqlite3AbsInt32(meta[BTREE_DEFAULT_CACHE_SIZE-1]); + if( size==0 ){ size = SQLITE_DEFAULT_CACHE_SIZE; } + pDb->pSchema->cache_size = size; +#else + pDb->pSchema->cache_size = SQLITE_DEFAULT_CACHE_SIZE; +#endif + sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); + } - /* Generate code that executes if the new index entry is not unique */ - assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail - || onError==OE_Ignore || onError==OE_Replace ); - switch( onError ){ - case OE_Rollback: - case OE_Abort: - case OE_Fail: { - int j; - StrAccum errMsg; - const char *zSep; - char *zErr; - - sqlite3StrAccumInit(&errMsg, 0, 0, 200); - errMsg.db = pParse->db; - zSep = pIdx->nColumn>1 ? "columns " : "column "; - for(j=0; jnColumn; j++){ - char *zCol = pTab->aCol[pIdx->aiColumn[j]].zName; - sqlite3StrAccumAppend(&errMsg, zSep, -1); - zSep = ", "; - sqlite3StrAccumAppend(&errMsg, zCol, -1); - } - sqlite3StrAccumAppend(&errMsg, - pIdx->nColumn>1 ? " are not unique" : " is not unique", -1); - zErr = sqlite3StrAccumFinish(&errMsg); - sqlite3HaltConstraint(pParse, onError, zErr, 0); - sqlite3DbFree(errMsg.db, zErr); - break; - } - case OE_Ignore: { - assert( seenReplace==0 ); - sqlite3VdbeAddOp2(v, OP_Goto, 0, ignoreDest); - break; - } - default: { - Trigger *pTrigger = 0; - assert( onError==OE_Replace ); - sqlite3MultiWrite(pParse); - if( pParse->db->flags&SQLITE_RecTriggers ){ - pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); - } - sqlite3GenerateRowDelete( - pParse, pTab, baseCur, regR, 0, pTrigger, OE_Replace - ); - seenReplace = 1; - break; - } - } - sqlite3VdbeJumpHere(v, j3); - sqlite3ReleaseTempReg(pParse, regR); + /* + ** file_format==1 Version 3.0.0. + ** file_format==2 Version 3.1.3. // ALTER TABLE ADD COLUMN + ** file_format==3 Version 3.1.4. // ditto but with non-NULL defaults + ** file_format==4 Version 3.3.0. // DESC indices. Boolean constants + */ + pDb->pSchema->file_format = (u8)meta[BTREE_FILE_FORMAT-1]; + if( pDb->pSchema->file_format==0 ){ + pDb->pSchema->file_format = 1; } - - if( pbMayReplace ){ - *pbMayReplace = seenReplace; + if( pDb->pSchema->file_format>SQLITE_MAX_FILE_FORMAT ){ + sqlite3SetString(pzErrMsg, db, "unsupported file format"); + rc = SQLITE_ERROR; + goto initone_error_out; } -} -/* -** This routine generates code to finish the INSERT or UPDATE operation -** that was started by a prior call to sqlite3GenerateConstraintChecks. -** A consecutive range of registers starting at regRowid contains the -** rowid and the content to be inserted. -** -** The arguments to this routine should be the same as the first six -** arguments to sqlite3GenerateConstraintChecks. -*/ -SQLITE_PRIVATE void sqlite3CompleteInsertion( - Parse *pParse, /* The parser context */ - Table *pTab, /* the table into which we are inserting */ - int baseCur, /* Index of a read/write cursor pointing at pTab */ - int regRowid, /* Range of content */ - int *aRegIdx, /* Register used by each index. 0 for unused indices */ - int isUpdate, /* True for UPDATE, False for INSERT */ - int appendBias, /* True if this is likely to be an append */ - int useSeekResult /* True to set the USESEEKRESULT flag on OP_[Idx]Insert */ -){ - int i; - Vdbe *v; - int nIdx; - Index *pIdx; - u8 pik_flags; - int regData; - int regRec; + /* Ticket #2804: When we open a database in the newer file format, + ** clear the legacy_file_format pragma flag so that a VACUUM will + ** not downgrade the database and thus invalidate any descending + ** indices that the user might have created. + */ + if( iDb==0 && meta[BTREE_FILE_FORMAT-1]>=4 ){ + db->flags &= ~SQLITE_LegacyFileFmt; + } - v = sqlite3GetVdbe(pParse); - assert( v!=0 ); - assert( pTab->pSelect==0 ); /* This table is not a VIEW */ - for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){} - for(i=nIdx-1; i>=0; i--){ - if( aRegIdx[i]==0 ) continue; - sqlite3VdbeAddOp2(v, OP_IdxInsert, baseCur+i+1, aRegIdx[i]); - if( useSeekResult ){ - sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + /* Read the schema information out of the schema tables + */ + assert( db->init.busy ); + { + char *zSql; + zSql = sqlite3MPrintf(db, + "SELECT name, rootpage, sql FROM '%q'.%s ORDER BY rowid", + db->aDb[iDb].zName, zMasterName); +#ifndef SQLITE_OMIT_AUTHORIZATION + { + sqlite3_xauth xAuth; + xAuth = db->xAuth; + db->xAuth = 0; +#endif + rc = sqlite3_exec(db, zSql, sqlite3InitCallback, &initData, 0); +#ifndef SQLITE_OMIT_AUTHORIZATION + db->xAuth = xAuth; + } +#endif + if( rc==SQLITE_OK ) rc = initData.rc; + sqlite3DbFree(db, zSql); +#ifndef SQLITE_OMIT_ANALYZE + if( rc==SQLITE_OK ){ + sqlite3AnalysisLoad(db, iDb); } +#endif } - regData = regRowid + 1; - regRec = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regData, pTab->nCol, regRec); - sqlite3TableAffinityStr(v, pTab); - sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol); - if( pParse->nested ){ - pik_flags = 0; - }else{ - pik_flags = OPFLAG_NCHANGE; - pik_flags |= (isUpdate?OPFLAG_ISUPDATE:OPFLAG_LASTROWID); + if( db->mallocFailed ){ + rc = SQLITE_NOMEM; + sqlite3ResetAllSchemasOfConnection(db); } - if( appendBias ){ - pik_flags |= OPFLAG_APPEND; + if( rc==SQLITE_OK || (db->flags&SQLITE_RecoveryMode)){ + /* Black magic: If the SQLITE_RecoveryMode flag is set, then consider + ** the schema loaded, even if errors occurred. In this situation the + ** current sqlite3_prepare() operation will fail, but the following one + ** will attempt to compile the supplied statement against whatever subset + ** of the schema was loaded before the error occurred. The primary + ** purpose of this is to allow access to the sqlite_master table + ** even when its contents have been corrupted. + */ + DbSetProperty(db, iDb, DB_SchemaLoaded); + rc = SQLITE_OK; } - if( useSeekResult ){ - pik_flags |= OPFLAG_USESEEKRESULT; + + /* Jump here for an error that occurs after successfully allocating + ** curMain and calling sqlite3BtreeEnter(). For an error that occurs + ** before that point, jump to error_out. + */ +initone_error_out: + if( openedTransaction ){ + sqlite3BtreeCommit(pDb->pBt); } - sqlite3VdbeAddOp3(v, OP_Insert, baseCur, regRec, regRowid); - if( !pParse->nested ){ - sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT); + sqlite3BtreeLeave(pDb->pBt); + +error_out: + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + db->mallocFailed = 1; } - sqlite3VdbeChangeP5(v, pik_flags); + return rc; } /* -** Generate code that will open cursors for a table and for all -** indices of that table. The "baseCur" parameter is the cursor number used -** for the table. Indices are opened on subsequent cursors. +** Initialize all database files - the main database file, the file +** used to store temporary tables, and any additional database files +** created using ATTACH statements. Return a success code. If an +** error occurs, write an error message into *pzErrMsg. ** -** Return the number of indices on the table. +** After a database is initialized, the DB_SchemaLoaded bit is set +** bit is set in the flags field of the Db structure. If the database +** file was of zero-length, then the DB_Empty flag is also set. */ -SQLITE_PRIVATE int sqlite3OpenTableAndIndices( - Parse *pParse, /* Parsing context */ - Table *pTab, /* Table to be opened */ - int baseCur, /* Cursor number assigned to the table */ - int op /* OP_OpenRead or OP_OpenWrite */ -){ - int i; - int iDb; - Index *pIdx; - Vdbe *v; - - if( IsVirtual(pTab) ) return 0; - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - v = sqlite3GetVdbe(pParse); - assert( v!=0 ); - sqlite3OpenTable(pParse, baseCur, iDb, pTab, op); - for(i=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ - KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx); - assert( pIdx->pSchema==pTab->pSchema ); - sqlite3VdbeAddOp4(v, op, i+baseCur, pIdx->tnum, iDb, - (char*)pKey, P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pIdx->zName)); - } - if( pParse->nTabnTab = baseCur+i; +SQLITE_PRIVATE int sqlite3Init(sqlite3 *db, char **pzErrMsg){ + int i, rc; + int commit_internal = !(db->flags&SQLITE_InternChanges); + + assert( sqlite3_mutex_held(db->mutex) ); + assert( db->init.busy==0 ); + rc = SQLITE_OK; + db->init.busy = 1; + for(i=0; rc==SQLITE_OK && inDb; i++){ + if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue; + rc = sqlite3InitOne(db, i, pzErrMsg); + if( rc ){ + sqlite3ResetOneSchema(db, i); + } } - return i-1; -} + /* Once all the other databases have been initialized, load the schema + ** for the TEMP database. This is loaded last, as the TEMP database + ** schema may contain references to objects in other databases. + */ +#ifndef SQLITE_OMIT_TEMPDB + assert( db->nDb>1 ); + if( rc==SQLITE_OK && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ + rc = sqlite3InitOne(db, 1, pzErrMsg); + if( rc ){ + sqlite3ResetOneSchema(db, 1); + } + } +#endif -#ifdef SQLITE_TEST -/* -** The following global variable is incremented whenever the -** transfer optimization is used. This is used for testing -** purposes only - to make sure the transfer optimization really -** is happening when it is suppose to. -*/ -SQLITE_API int sqlite3_xferopt_count; -#endif /* SQLITE_TEST */ + db->init.busy = 0; + if( rc==SQLITE_OK && commit_internal ){ + sqlite3CommitInternalChanges(db); + } + return rc; +} -#ifndef SQLITE_OMIT_XFER_OPT /* -** Check to collation names to see if they are compatible. +** This routine is a no-op if the database schema is already initialized. +** Otherwise, the schema is loaded. An error code is returned. */ -static int xferCompatibleCollation(const char *z1, const char *z2){ - if( z1==0 ){ - return z2==0; +SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse){ + int rc = SQLITE_OK; + sqlite3 *db = pParse->db; + assert( sqlite3_mutex_held(db->mutex) ); + if( !db->init.busy ){ + rc = sqlite3Init(db, &pParse->zErrMsg); } - if( z2==0 ){ - return 0; + if( rc!=SQLITE_OK ){ + pParse->rc = rc; + pParse->nErr++; } - return sqlite3StrICmp(z1, z2)==0; + return rc; } /* -** Check to see if index pSrc is compatible as a source of data -** for index pDest in an insert transfer optimization. The rules -** for a compatible index: -** -** * The index is over the same set of columns -** * The same DESC and ASC markings occurs on all columns -** * The same onError processing (OE_Abort, OE_Ignore, etc) -** * The same collating sequence on each column +** Check schema cookies in all databases. If any cookie is out +** of date set pParse->rc to SQLITE_SCHEMA. If all schema cookies +** make no changes to pParse->rc. */ -static int xferCompatibleIndex(Index *pDest, Index *pSrc){ - int i; - assert( pDest && pSrc ); - assert( pDest->pTable!=pSrc->pTable ); - if( pDest->nColumn!=pSrc->nColumn ){ - return 0; /* Different number of columns */ - } - if( pDest->onError!=pSrc->onError ){ - return 0; /* Different conflict resolution strategies */ - } - for(i=0; inColumn; i++){ - if( pSrc->aiColumn[i]!=pDest->aiColumn[i] ){ - return 0; /* Different columns indexed */ - } - if( pSrc->aSortOrder[i]!=pDest->aSortOrder[i] ){ - return 0; /* Different sort orders */ - } - if( !xferCompatibleCollation(pSrc->azColl[i],pDest->azColl[i]) ){ - return 0; /* Different collating sequences */ - } - } +static void schemaIsValid(Parse *pParse){ + sqlite3 *db = pParse->db; + int iDb; + int rc; + int cookie; - /* If no test above fails then the indices must be compatible */ - return 1; -} + assert( pParse->checkSchema ); + assert( sqlite3_mutex_held(db->mutex) ); + for(iDb=0; iDbnDb; iDb++){ + int openedTransaction = 0; /* True if a transaction is opened */ + Btree *pBt = db->aDb[iDb].pBt; /* Btree database to read cookie from */ + if( pBt==0 ) continue; -/* -** Attempt the transfer optimization on INSERTs of the form -** -** INSERT INTO tab1 SELECT * FROM tab2; -** -** This optimization is only attempted if -** -** (1) tab1 and tab2 have identical schemas including all the -** same indices and constraints -** -** (2) tab1 and tab2 are different tables -** -** (3) There must be no triggers on tab1 -** -** (4) The result set of the SELECT statement is "*" -** -** (5) The SELECT statement has no WHERE, HAVING, ORDER BY, GROUP BY, -** or LIMIT clause. -** -** (6) The SELECT statement is a simple (not a compound) select that -** contains only tab2 in its FROM clause -** -** This method for implementing the INSERT transfers raw records from -** tab2 over to tab1. The columns are not decoded. Raw records from -** the indices of tab2 are transfered to tab1 as well. In so doing, -** the resulting tab1 has much less fragmentation. -** -** This routine returns TRUE if the optimization is attempted. If any -** of the conditions above fail so that the optimization should not -** be attempted, then this routine returns FALSE. -*/ -static int xferOptimization( - Parse *pParse, /* Parser context */ - Table *pDest, /* The table we are inserting into */ - Select *pSelect, /* A SELECT statement to use as the data source */ - int onError, /* How to handle constraint errors */ - int iDbDest /* The database of pDest */ -){ - ExprList *pEList; /* The result set of the SELECT */ - Table *pSrc; /* The table in the FROM clause of SELECT */ - Index *pSrcIdx, *pDestIdx; /* Source and destination indices */ - struct SrcList_item *pItem; /* An element of pSelect->pSrc */ - int i; /* Loop counter */ - int iDbSrc; /* The database of pSrc */ - int iSrc, iDest; /* Cursors from source and destination */ - int addr1, addr2; /* Loop addresses */ - int emptyDestTest; /* Address of test for empty pDest */ - int emptySrcTest; /* Address of test for empty pSrc */ - Vdbe *v; /* The VDBE we are building */ - KeyInfo *pKey; /* Key information for an index */ - int regAutoinc; /* Memory register used by AUTOINC */ - int destHasUniqueIdx = 0; /* True if pDest has a UNIQUE index */ - int regData, regRowid; /* Registers holding data and rowid */ + /* If there is not already a read-only (or read-write) transaction opened + ** on the b-tree database, open one now. If a transaction is opened, it + ** will be closed immediately after reading the meta-value. */ + if( !sqlite3BtreeIsInReadTrans(pBt) ){ + rc = sqlite3BtreeBeginTrans(pBt, 0); + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + db->mallocFailed = 1; + } + if( rc!=SQLITE_OK ) return; + openedTransaction = 1; + } - if( pSelect==0 ){ - return 0; /* Must be of the form INSERT INTO ... SELECT ... */ - } - if( sqlite3TriggerList(pParse, pDest) ){ - return 0; /* tab1 must not have triggers */ - } -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( pDest->tabFlags & TF_Virtual ){ - return 0; /* tab1 must not be a virtual table */ - } -#endif - if( onError==OE_Default ){ - onError = OE_Abort; - } - if( onError!=OE_Abort && onError!=OE_Rollback ){ - return 0; /* Cannot do OR REPLACE or OR IGNORE or OR FAIL */ - } - assert(pSelect->pSrc); /* allocated even if there is no FROM clause */ - if( pSelect->pSrc->nSrc!=1 ){ - return 0; /* FROM clause must have exactly one term */ - } - if( pSelect->pSrc->a[0].pSelect ){ - return 0; /* FROM clause cannot contain a subquery */ - } - if( pSelect->pWhere ){ - return 0; /* SELECT may not have a WHERE clause */ - } - if( pSelect->pOrderBy ){ - return 0; /* SELECT may not have an ORDER BY clause */ - } - /* Do not need to test for a HAVING clause. If HAVING is present but - ** there is no ORDER BY, we will get an error. */ - if( pSelect->pGroupBy ){ - return 0; /* SELECT may not have a GROUP BY clause */ - } - if( pSelect->pLimit ){ - return 0; /* SELECT may not have a LIMIT clause */ - } - assert( pSelect->pOffset==0 ); /* Must be so if pLimit==0 */ - if( pSelect->pPrior ){ - return 0; /* SELECT may not be a compound query */ + /* Read the schema cookie from the database. If it does not match the + ** value stored as part of the in-memory schema representation, + ** set Parse.rc to SQLITE_SCHEMA. */ + sqlite3BtreeGetMeta(pBt, BTREE_SCHEMA_VERSION, (u32 *)&cookie); + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + if( cookie!=db->aDb[iDb].pSchema->schema_cookie ){ + sqlite3ResetOneSchema(db, iDb); + pParse->rc = SQLITE_SCHEMA; + } + + /* Close the transaction, if one was opened. */ + if( openedTransaction ){ + sqlite3BtreeCommit(pBt); + } } - if( pSelect->selFlags & SF_Distinct ){ - return 0; /* SELECT may not be DISTINCT */ +} + +/* +** Convert a schema pointer into the iDb index that indicates +** which database file in db->aDb[] the schema refers to. +** +** If the same database is attached more than once, the first +** attached database is returned. +*/ +SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *pSchema){ + int i = -1000000; + + /* If pSchema is NULL, then return -1000000. This happens when code in + ** expr.c is trying to resolve a reference to a transient table (i.e. one + ** created by a sub-select). In this case the return value of this + ** function should never be used. + ** + ** We return -1000000 instead of the more usual -1 simply because using + ** -1000000 as the incorrect index into db->aDb[] is much + ** more likely to cause a segfault than -1 (of course there are assert() + ** statements too, but it never hurts to play the odds). + */ + assert( sqlite3_mutex_held(db->mutex) ); + if( pSchema ){ + for(i=0; ALWAYS(inDb); i++){ + if( db->aDb[i].pSchema==pSchema ){ + break; + } + } + assert( i>=0 && inDb ); } - pEList = pSelect->pEList; - assert( pEList!=0 ); - if( pEList->nExpr!=1 ){ - return 0; /* The result set must have exactly one column */ + return i; +} + +/* +** Free all memory allocations in the pParse object +*/ +SQLITE_PRIVATE void sqlite3ParserReset(Parse *pParse){ + if( pParse ){ + sqlite3 *db = pParse->db; + sqlite3DbFree(db, pParse->aLabel); + sqlite3ExprListDelete(db, pParse->pConstExpr); } - assert( pEList->a[0].pExpr ); - if( pEList->a[0].pExpr->op!=TK_ALL ){ - return 0; /* The result set must be the special operator "*" */ +} + +/* +** Compile the UTF-8 encoded SQL statement zSql into a statement handle. +*/ +static int sqlite3Prepare( + sqlite3 *db, /* Database handle. */ + const char *zSql, /* UTF-8 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ + Vdbe *pReprepare, /* VM being reprepared */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const char **pzTail /* OUT: End of parsed string */ +){ + Parse *pParse; /* Parsing context */ + char *zErrMsg = 0; /* Error message */ + int rc = SQLITE_OK; /* Result code */ + int i; /* Loop counter */ + + /* Allocate the parsing context */ + pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); + if( pParse==0 ){ + rc = SQLITE_NOMEM; + goto end_prepare; } + pParse->pReprepare = pReprepare; + assert( ppStmt && *ppStmt==0 ); + assert( !db->mallocFailed ); + assert( sqlite3_mutex_held(db->mutex) ); - /* At this point we have established that the statement is of the - ** correct syntactic form to participate in this optimization. Now - ** we have to check the semantics. + /* Check to verify that it is possible to get a read lock on all + ** database schemas. The inability to get a read lock indicates that + ** some other database connection is holding a write-lock, which in + ** turn means that the other connection has made uncommitted changes + ** to the schema. + ** + ** Were we to proceed and prepare the statement against the uncommitted + ** schema changes and if those schema changes are subsequently rolled + ** back and different changes are made in their place, then when this + ** prepared statement goes to run the schema cookie would fail to detect + ** the schema change. Disaster would follow. + ** + ** This thread is currently holding mutexes on all Btrees (because + ** of the sqlite3BtreeEnterAll() in sqlite3LockAndPrepare()) so it + ** is not possible for another thread to start a new schema change + ** while this routine is running. Hence, we do not need to hold + ** locks on the schema, we just need to make sure nobody else is + ** holding them. + ** + ** Note that setting READ_UNCOMMITTED overrides most lock detection, + ** but it does *not* override schema lock detection, so this all still + ** works even if READ_UNCOMMITTED is set. */ - pItem = pSelect->pSrc->a; - pSrc = sqlite3LocateTable(pParse, 0, pItem->zName, pItem->zDatabase); - if( pSrc==0 ){ - return 0; /* FROM clause does not contain a real table */ - } - if( pSrc==pDest ){ - return 0; /* tab1 and tab2 may not be the same table */ + for(i=0; inDb; i++) { + Btree *pBt = db->aDb[i].pBt; + if( pBt ){ + assert( sqlite3BtreeHoldsMutex(pBt) ); + rc = sqlite3BtreeSchemaLocked(pBt); + if( rc ){ + const char *zDb = db->aDb[i].zName; + sqlite3ErrorWithMsg(db, rc, "database schema is locked: %s", zDb); + testcase( db->flags & SQLITE_ReadUncommitted ); + goto end_prepare; + } + } } -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( pSrc->tabFlags & TF_Virtual ){ - return 0; /* tab2 must not be a virtual table */ + + sqlite3VtabUnlockList(db); + + pParse->db = db; + pParse->nQueryLoop = 0; /* Logarithmic, so 0 really means 1 */ + if( nBytes>=0 && (nBytes==0 || zSql[nBytes-1]!=0) ){ + char *zSqlCopy; + int mxLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH]; + testcase( nBytes==mxLen ); + testcase( nBytes==mxLen+1 ); + if( nBytes>mxLen ){ + sqlite3ErrorWithMsg(db, SQLITE_TOOBIG, "statement too long"); + rc = sqlite3ApiExit(db, SQLITE_TOOBIG); + goto end_prepare; + } + zSqlCopy = sqlite3DbStrNDup(db, zSql, nBytes); + if( zSqlCopy ){ + sqlite3RunParser(pParse, zSqlCopy, &zErrMsg); + sqlite3DbFree(db, zSqlCopy); + pParse->zTail = &zSql[pParse->zTail-zSqlCopy]; + }else{ + pParse->zTail = &zSql[nBytes]; + } + }else{ + sqlite3RunParser(pParse, zSql, &zErrMsg); } -#endif - if( pSrc->pSelect ){ - return 0; /* tab2 may not be a view */ + assert( 0==pParse->nQueryLoop ); + + if( db->mallocFailed ){ + pParse->rc = SQLITE_NOMEM; } - if( pDest->nCol!=pSrc->nCol ){ - return 0; /* Number of columns must be the same in tab1 and tab2 */ + if( pParse->rc==SQLITE_DONE ) pParse->rc = SQLITE_OK; + if( pParse->checkSchema ){ + schemaIsValid(pParse); } - if( pDest->iPKey!=pSrc->iPKey ){ - return 0; /* Both tables must have the same INTEGER PRIMARY KEY */ + if( db->mallocFailed ){ + pParse->rc = SQLITE_NOMEM; } - for(i=0; inCol; i++){ - if( pDest->aCol[i].affinity!=pSrc->aCol[i].affinity ){ - return 0; /* Affinity must be the same on all columns */ - } - if( !xferCompatibleCollation(pDest->aCol[i].zColl, pSrc->aCol[i].zColl) ){ - return 0; /* Collating sequence must be the same on all columns */ - } - if( pDest->aCol[i].notNull && !pSrc->aCol[i].notNull ){ - return 0; /* tab2 must be NOT NULL if tab1 is */ - } + if( pzTail ){ + *pzTail = pParse->zTail; } - for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){ - if( pDestIdx->onError!=OE_None ){ - destHasUniqueIdx = 1; - } - for(pSrcIdx=pSrc->pIndex; pSrcIdx; pSrcIdx=pSrcIdx->pNext){ - if( xferCompatibleIndex(pDestIdx, pSrcIdx) ) break; + rc = pParse->rc; + +#ifndef SQLITE_OMIT_EXPLAIN + if( rc==SQLITE_OK && pParse->pVdbe && pParse->explain ){ + static const char * const azColName[] = { + "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment", + "selectid", "order", "from", "detail" + }; + int iFirst, mx; + if( pParse->explain==2 ){ + sqlite3VdbeSetNumCols(pParse->pVdbe, 4); + iFirst = 8; + mx = 12; + }else{ + sqlite3VdbeSetNumCols(pParse->pVdbe, 8); + iFirst = 0; + mx = 8; } - if( pSrcIdx==0 ){ - return 0; /* pDestIdx has no corresponding index in pSrc */ + for(i=iFirst; ipVdbe, i-iFirst, COLNAME_NAME, + azColName[i], SQLITE_STATIC); } } -#ifndef SQLITE_OMIT_CHECK - if( pDest->pCheck && sqlite3ExprCompare(pSrc->pCheck, pDest->pCheck) ){ - return 0; /* Tables have different CHECK constraints. Ticket #2252 */ - } -#endif -#ifndef SQLITE_OMIT_FOREIGN_KEY - /* Disallow the transfer optimization if the destination table constains - ** any foreign key constraints. This is more restrictive than necessary. - ** But the main beneficiary of the transfer optimization is the VACUUM - ** command, and the VACUUM command disables foreign key constraints. So - ** the extra complication to make this rule less restrictive is probably - ** not worth the effort. Ticket [6284df89debdfa61db8073e062908af0c9b6118e] - */ - if( (pParse->db->flags & SQLITE_ForeignKeys)!=0 && pDest->pFKey!=0 ){ - return 0; - } #endif - /* If we get this far, it means either: - ** - ** * We can always do the transfer if the table contains an - ** an integer primary key - ** - ** * We can conditionally do the transfer if the destination - ** table is empty. - */ -#ifdef SQLITE_TEST - sqlite3_xferopt_count++; -#endif - iDbSrc = sqlite3SchemaToIndex(pParse->db, pSrc->pSchema); - v = sqlite3GetVdbe(pParse); - sqlite3CodeVerifySchema(pParse, iDbSrc); - iSrc = pParse->nTab++; - iDest = pParse->nTab++; - regAutoinc = autoIncBegin(pParse, iDbDest, pDest); - sqlite3OpenTable(pParse, iDest, iDbDest, pDest, OP_OpenWrite); - if( (pDest->iPKey<0 && pDest->pIndex!=0) || destHasUniqueIdx ){ - /* If tables do not have an INTEGER PRIMARY KEY and there - ** are indices to be copied and the destination is not empty, - ** we have to disallow the transfer optimization because the - ** the rowids might change which will mess up indexing. - ** - ** Or if the destination has a UNIQUE index and is not empty, - ** we also disallow the transfer optimization because we cannot - ** insure that all entries in the union of DEST and SRC will be - ** unique. - */ - addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iDest, 0); - emptyDestTest = sqlite3VdbeAddOp2(v, OP_Goto, 0, 0); - sqlite3VdbeJumpHere(v, addr1); + if( db->init.busy==0 ){ + Vdbe *pVdbe = pParse->pVdbe; + sqlite3VdbeSetSql(pVdbe, zSql, (int)(pParse->zTail-zSql), saveSqlFlag); + } + if( pParse->pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){ + sqlite3VdbeFinalize(pParse->pVdbe); + assert(!(*ppStmt)); }else{ - emptyDestTest = 0; + *ppStmt = (sqlite3_stmt*)pParse->pVdbe; } - sqlite3OpenTable(pParse, iSrc, iDbSrc, pSrc, OP_OpenRead); - emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); - regData = sqlite3GetTempReg(pParse); - regRowid = sqlite3GetTempReg(pParse); - if( pDest->iPKey>=0 ){ - addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); - addr2 = sqlite3VdbeAddOp3(v, OP_NotExists, iDest, 0, regRowid); - sqlite3HaltConstraint( - pParse, onError, "PRIMARY KEY must be unique", P4_STATIC); - sqlite3VdbeJumpHere(v, addr2); - autoIncStep(pParse, regAutoinc, regRowid); - }else if( pDest->pIndex==0 ){ - addr1 = sqlite3VdbeAddOp2(v, OP_NewRowid, iDest, regRowid); + + if( zErrMsg ){ + sqlite3ErrorWithMsg(db, rc, "%s", zErrMsg); + sqlite3DbFree(db, zErrMsg); }else{ - addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); - assert( (pDest->tabFlags & TF_Autoincrement)==0 ); + sqlite3Error(db, rc); } - sqlite3VdbeAddOp2(v, OP_RowData, iSrc, regData); - sqlite3VdbeAddOp3(v, OP_Insert, iDest, regData, regRowid); - sqlite3VdbeChangeP5(v, OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND); - sqlite3VdbeChangeP4(v, -1, pDest->zName, 0); - sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1); - for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){ - for(pSrcIdx=pSrc->pIndex; ALWAYS(pSrcIdx); pSrcIdx=pSrcIdx->pNext){ - if( xferCompatibleIndex(pDestIdx, pSrcIdx) ) break; - } - assert( pSrcIdx ); - sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); - sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); - pKey = sqlite3IndexKeyinfo(pParse, pSrcIdx); - sqlite3VdbeAddOp4(v, OP_OpenRead, iSrc, pSrcIdx->tnum, iDbSrc, - (char*)pKey, P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pSrcIdx->zName)); - pKey = sqlite3IndexKeyinfo(pParse, pDestIdx); - sqlite3VdbeAddOp4(v, OP_OpenWrite, iDest, pDestIdx->tnum, iDbDest, - (char*)pKey, P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pDestIdx->zName)); - addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); - sqlite3VdbeAddOp2(v, OP_RowKey, iSrc, regData); - sqlite3VdbeAddOp3(v, OP_IdxInsert, iDest, regData, 1); - sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1+1); - sqlite3VdbeJumpHere(v, addr1); + + /* Delete any TriggerPrg structures allocated while parsing this statement. */ + while( pParse->pTriggerPrg ){ + TriggerPrg *pT = pParse->pTriggerPrg; + pParse->pTriggerPrg = pT->pNext; + sqlite3DbFree(db, pT); } - sqlite3VdbeJumpHere(v, emptySrcTest); - sqlite3ReleaseTempReg(pParse, regRowid); - sqlite3ReleaseTempReg(pParse, regData); - sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); - sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); - if( emptyDestTest ){ - sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_OK, 0); - sqlite3VdbeJumpHere(v, emptyDestTest); - sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); - return 0; - }else{ - return 1; + +end_prepare: + + sqlite3ParserReset(pParse); + sqlite3StackFree(db, pParse); + rc = sqlite3ApiExit(db, rc); + assert( (rc&db->errMask)==rc ); + return rc; +} +static int sqlite3LockAndPrepare( + sqlite3 *db, /* Database handle. */ + const char *zSql, /* UTF-8 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ + Vdbe *pOld, /* VM being reprepared */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const char **pzTail /* OUT: End of parsed string */ +){ + int rc; + assert( ppStmt!=0 ); + *ppStmt = 0; + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); + if( rc==SQLITE_SCHEMA ){ + sqlite3_finalize(*ppStmt); + rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); } + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + assert( rc==SQLITE_OK || *ppStmt==0 ); + return rc; } -#endif /* SQLITE_OMIT_XFER_OPT */ -/************** End of insert.c **********************************************/ -/************** Begin file legacy.c ******************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Rerun the compilation of a statement after a schema change. ** -************************************************************************* -** Main file for the SQLite library. The routines in this file -** implement the programmer interface to the library. Routines in -** other files are for internal use by SQLite and should not be -** accessed by users of the library. +** If the statement is successfully recompiled, return SQLITE_OK. Otherwise, +** if the statement cannot be recompiled because another connection has +** locked the sqlite3_master table, return SQLITE_LOCKED. If any other error +** occurs, return SQLITE_SCHEMA. */ +SQLITE_PRIVATE int sqlite3Reprepare(Vdbe *p){ + int rc; + sqlite3_stmt *pNew; + const char *zSql; + sqlite3 *db; + + assert( sqlite3_mutex_held(sqlite3VdbeDb(p)->mutex) ); + zSql = sqlite3_sql((sqlite3_stmt *)p); + assert( zSql!=0 ); /* Reprepare only called for prepare_v2() statements */ + db = sqlite3VdbeDb(p); + assert( sqlite3_mutex_held(db->mutex) ); + rc = sqlite3LockAndPrepare(db, zSql, -1, 0, p, &pNew, 0); + if( rc ){ + if( rc==SQLITE_NOMEM ){ + db->mallocFailed = 1; + } + assert( pNew==0 ); + return rc; + }else{ + assert( pNew!=0 ); + } + sqlite3VdbeSwap((Vdbe*)pNew, p); + sqlite3TransferBindings(pNew, (sqlite3_stmt*)p); + sqlite3VdbeResetStepResult((Vdbe*)pNew); + sqlite3VdbeFinalize((Vdbe*)pNew); + return SQLITE_OK; +} /* -** Execute SQL code. Return one of the SQLITE_ success/failure -** codes. Also write an error message into memory obtained from -** malloc() and make *pzErrMsg point to that message. -** -** If the SQL is a query, then for each row in the query result -** the xCallback() function is called. pArg becomes the first -** argument to xCallback(). If xCallback=NULL then no callback -** is invoked, even for queries. +** Two versions of the official API. Legacy and new use. In the legacy +** version, the original SQL text is not saved in the prepared statement +** and so if a schema change occurs, SQLITE_SCHEMA is returned by +** sqlite3_step(). In the new version, the original SQL text is retained +** and the statement is automatically recompiled if an schema change +** occurs. */ -SQLITE_API int sqlite3_exec( - sqlite3 *db, /* The database on which the SQL executes */ - const char *zSql, /* The SQL to be executed */ - sqlite3_callback xCallback, /* Invoke this callback routine */ - void *pArg, /* First argument to xCallback() */ - char **pzErrMsg /* Write error messages here */ +SQLITE_API int sqlite3_prepare( + sqlite3 *db, /* Database handle. */ + const char *zSql, /* UTF-8 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const char **pzTail /* OUT: End of parsed string */ ){ - int rc = SQLITE_OK; /* Return code */ - const char *zLeftover; /* Tail of unprocessed SQL */ - sqlite3_stmt *pStmt = 0; /* The current SQL statement */ - char **azCols = 0; /* Names of result columns */ - int nRetry = 0; /* Number of retry attempts */ - int callbackIsInit; /* True if callback data is initialized */ - - if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; - if( zSql==0 ) zSql = ""; - - sqlite3_mutex_enter(db->mutex); - sqlite3Error(db, SQLITE_OK, 0); - while( (rc==SQLITE_OK || (rc==SQLITE_SCHEMA && (++nRetry)<2)) && zSql[0] ){ - int nCol; - char **azVals = 0; - - pStmt = 0; - rc = sqlite3_prepare(db, zSql, -1, &pStmt, &zLeftover); - assert( rc==SQLITE_OK || pStmt==0 ); - if( rc!=SQLITE_OK ){ - continue; - } - if( !pStmt ){ - /* this happens for a comment or white-space */ - zSql = zLeftover; - continue; - } - - callbackIsInit = 0; - nCol = sqlite3_column_count(pStmt); - - while( 1 ){ - int i; - rc = sqlite3_step(pStmt); + int rc; + rc = sqlite3LockAndPrepare(db,zSql,nBytes,0,0,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + return rc; +} +SQLITE_API int sqlite3_prepare_v2( + sqlite3 *db, /* Database handle. */ + const char *zSql, /* UTF-8 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const char **pzTail /* OUT: End of parsed string */ +){ + int rc; + rc = sqlite3LockAndPrepare(db,zSql,nBytes,1,0,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + return rc; +} - /* Invoke the callback function if required */ - if( xCallback && (SQLITE_ROW==rc || - (SQLITE_DONE==rc && !callbackIsInit - && db->flags&SQLITE_NullCallback)) ){ - if( !callbackIsInit ){ - azCols = sqlite3DbMallocZero(db, 2*nCol*sizeof(const char*) + 1); - if( azCols==0 ){ - goto exec_out; - } - for(i=0; imallocFailed = 1; - goto exec_out; - } - } - } - if( xCallback(pArg, nCol, azVals, azCols) ){ - rc = SQLITE_ABORT; - sqlite3VdbeFinalize((Vdbe *)pStmt); - pStmt = 0; - sqlite3Error(db, SQLITE_ABORT, 0); - goto exec_out; - } - } - if( rc!=SQLITE_ROW ){ - rc = sqlite3VdbeFinalize((Vdbe *)pStmt); - pStmt = 0; - if( rc!=SQLITE_SCHEMA ){ - nRetry = 0; - zSql = zLeftover; - while( sqlite3Isspace(zSql[0]) ) zSql++; - } - break; - } - } +#ifndef SQLITE_OMIT_UTF16 +/* +** Compile the UTF-16 encoded SQL statement zSql into a statement handle. +*/ +static int sqlite3Prepare16( + sqlite3 *db, /* Database handle. */ + const void *zSql, /* UTF-16 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + int saveSqlFlag, /* True to save SQL text into the sqlite3_stmt */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const void **pzTail /* OUT: End of parsed string */ +){ + /* This function currently works by first transforming the UTF-16 + ** encoded string to UTF-8, then invoking sqlite3_prepare(). The + ** tricky bit is figuring out the pointer to return in *pzTail. + */ + char *zSql8; + const char *zTail8 = 0; + int rc = SQLITE_OK; - sqlite3DbFree(db, azCols); - azCols = 0; + assert( ppStmt ); + *ppStmt = 0; + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( nBytes>=0 ){ + int sz; + const char *z = (const char*)zSql; + for(sz=0; szmutex); + zSql8 = sqlite3Utf16to8(db, zSql, nBytes, SQLITE_UTF16NATIVE); + if( zSql8 ){ + rc = sqlite3LockAndPrepare(db, zSql8, -1, saveSqlFlag, 0, ppStmt, &zTail8); } -exec_out: - if( pStmt ) sqlite3VdbeFinalize((Vdbe *)pStmt); - sqlite3DbFree(db, azCols); - - rc = sqlite3ApiExit(db, rc); - if( rc!=SQLITE_OK && ALWAYS(rc==sqlite3_errcode(db)) && pzErrMsg ){ - int nErrMsg = 1 + sqlite3Strlen30(sqlite3_errmsg(db)); - *pzErrMsg = sqlite3Malloc(nErrMsg); - if( *pzErrMsg ){ - memcpy(*pzErrMsg, sqlite3_errmsg(db), nErrMsg); - }else{ - rc = SQLITE_NOMEM; - sqlite3Error(db, SQLITE_NOMEM, 0); - } - }else if( pzErrMsg ){ - *pzErrMsg = 0; + if( zTail8 && pzTail ){ + /* If sqlite3_prepare returns a tail pointer, we calculate the + ** equivalent pointer into the UTF-16 string by counting the unicode + ** characters between zSql8 and zTail8, and then returning a pointer + ** the same number of characters into the UTF-16 string. + */ + int chars_parsed = sqlite3Utf8CharLen(zSql8, (int)(zTail8-zSql8)); + *pzTail = (u8 *)zSql + sqlite3Utf16ByteLen(zSql, chars_parsed); } - - assert( (rc&db->errMask)==rc ); + sqlite3DbFree(db, zSql8); + rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; } -/************** End of legacy.c **********************************************/ -/************** Begin file loadext.c *****************************************/ /* -** 2006 June 7 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains code used to dynamically load extensions into -** the SQLite library. +** Two versions of the official API. Legacy and new use. In the legacy +** version, the original SQL text is not saved in the prepared statement +** and so if a schema change occurs, SQLITE_SCHEMA is returned by +** sqlite3_step(). In the new version, the original SQL text is retained +** and the statement is automatically recompiled if an schema change +** occurs. */ +SQLITE_API int sqlite3_prepare16( + sqlite3 *db, /* Database handle. */ + const void *zSql, /* UTF-16 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const void **pzTail /* OUT: End of parsed string */ +){ + int rc; + rc = sqlite3Prepare16(db,zSql,nBytes,0,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + return rc; +} +SQLITE_API int sqlite3_prepare16_v2( + sqlite3 *db, /* Database handle. */ + const void *zSql, /* UTF-16 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const void **pzTail /* OUT: End of parsed string */ +){ + int rc; + rc = sqlite3Prepare16(db,zSql,nBytes,1,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + return rc; +} -#ifndef SQLITE_CORE - #define SQLITE_CORE 1 /* Disable the API redefinition in sqlite3ext.h */ -#endif -/************** Include sqlite3ext.h in the middle of loadext.c **************/ -/************** Begin file sqlite3ext.h **************************************/ +#endif /* SQLITE_OMIT_UTF16 */ + +/************** End of prepare.c *********************************************/ +/************** Begin file select.c ******************************************/ /* -** 2006 June 7 +** 2001 September 15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -87034,29407 +104078,33224 @@ exec_out: ** May you share freely, never taking more than you give. ** ************************************************************************* -** This header file defines the SQLite interface for use by -** shared libraries that want to be imported as extensions into -** an SQLite instance. Shared libraries that intend to be loaded -** as extensions by SQLite should #include this file instead of -** sqlite3.h. +** This file contains C code routines that are called by the parser +** to handle SELECT statements in SQLite. */ -#ifndef _SQLITE3EXT_H_ -#define _SQLITE3EXT_H_ -typedef struct sqlite3_api_routines sqlite3_api_routines; +/* +** Trace output macros +*/ +#if SELECTTRACE_ENABLED +/***/ int sqlite3SelectTrace = 0; +# define SELECTTRACE(K,P,S,X) \ + if(sqlite3SelectTrace&(K)) \ + sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",(S)->zSelName,(S)),\ + sqlite3DebugPrintf X +#else +# define SELECTTRACE(K,P,S,X) +#endif + /* -** The following structure holds pointers to all of the SQLite API -** routines. -** -** WARNING: In order to maintain backwards compatibility, add new -** interfaces to the end of this structure only. If you insert new -** interfaces in the middle of this structure, then older different -** versions of SQLite will not be able to load each others' shared -** libraries! +** An instance of the following object is used to record information about +** how to process the DISTINCT keyword, to simplify passing that information +** into the selectInnerLoop() routine. */ -struct sqlite3_api_routines { - void * (*aggregate_context)(sqlite3_context*,int nBytes); - int (*aggregate_count)(sqlite3_context*); - int (*bind_blob)(sqlite3_stmt*,int,const void*,int n,void(*)(void*)); - int (*bind_double)(sqlite3_stmt*,int,double); - int (*bind_int)(sqlite3_stmt*,int,int); - int (*bind_int64)(sqlite3_stmt*,int,sqlite_int64); - int (*bind_null)(sqlite3_stmt*,int); - int (*bind_parameter_count)(sqlite3_stmt*); - int (*bind_parameter_index)(sqlite3_stmt*,const char*zName); - const char * (*bind_parameter_name)(sqlite3_stmt*,int); - int (*bind_text)(sqlite3_stmt*,int,const char*,int n,void(*)(void*)); - int (*bind_text16)(sqlite3_stmt*,int,const void*,int,void(*)(void*)); - int (*bind_value)(sqlite3_stmt*,int,const sqlite3_value*); - int (*busy_handler)(sqlite3*,int(*)(void*,int),void*); - int (*busy_timeout)(sqlite3*,int ms); - int (*changes)(sqlite3*); - int (*close)(sqlite3*); - int (*collation_needed)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const char*)); - int (*collation_needed16)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const void*)); - const void * (*column_blob)(sqlite3_stmt*,int iCol); - int (*column_bytes)(sqlite3_stmt*,int iCol); - int (*column_bytes16)(sqlite3_stmt*,int iCol); - int (*column_count)(sqlite3_stmt*pStmt); - const char * (*column_database_name)(sqlite3_stmt*,int); - const void * (*column_database_name16)(sqlite3_stmt*,int); - const char * (*column_decltype)(sqlite3_stmt*,int i); - const void * (*column_decltype16)(sqlite3_stmt*,int); - double (*column_double)(sqlite3_stmt*,int iCol); - int (*column_int)(sqlite3_stmt*,int iCol); - sqlite_int64 (*column_int64)(sqlite3_stmt*,int iCol); - const char * (*column_name)(sqlite3_stmt*,int); - const void * (*column_name16)(sqlite3_stmt*,int); - const char * (*column_origin_name)(sqlite3_stmt*,int); - const void * (*column_origin_name16)(sqlite3_stmt*,int); - const char * (*column_table_name)(sqlite3_stmt*,int); - const void * (*column_table_name16)(sqlite3_stmt*,int); - const unsigned char * (*column_text)(sqlite3_stmt*,int iCol); - const void * (*column_text16)(sqlite3_stmt*,int iCol); - int (*column_type)(sqlite3_stmt*,int iCol); - sqlite3_value* (*column_value)(sqlite3_stmt*,int iCol); - void * (*commit_hook)(sqlite3*,int(*)(void*),void*); - int (*complete)(const char*sql); - int (*complete16)(const void*sql); - int (*create_collation)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*)); - int (*create_collation16)(sqlite3*,const void*,int,void*,int(*)(void*,int,const void*,int,const void*)); - int (*create_function)(sqlite3*,const char*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*)); - int (*create_function16)(sqlite3*,const void*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*)); - int (*create_module)(sqlite3*,const char*,const sqlite3_module*,void*); - int (*data_count)(sqlite3_stmt*pStmt); - sqlite3 * (*db_handle)(sqlite3_stmt*); - int (*declare_vtab)(sqlite3*,const char*); - int (*enable_shared_cache)(int); - int (*errcode)(sqlite3*db); - const char * (*errmsg)(sqlite3*); - const void * (*errmsg16)(sqlite3*); - int (*exec)(sqlite3*,const char*,sqlite3_callback,void*,char**); - int (*expired)(sqlite3_stmt*); - int (*finalize)(sqlite3_stmt*pStmt); - void (*free)(void*); - void (*free_table)(char**result); - int (*get_autocommit)(sqlite3*); - void * (*get_auxdata)(sqlite3_context*,int); - int (*get_table)(sqlite3*,const char*,char***,int*,int*,char**); - int (*global_recover)(void); - void (*interruptx)(sqlite3*); - sqlite_int64 (*last_insert_rowid)(sqlite3*); - const char * (*libversion)(void); - int (*libversion_number)(void); - void *(*malloc)(int); - char * (*mprintf)(const char*,...); - int (*open)(const char*,sqlite3**); - int (*open16)(const void*,sqlite3**); - int (*prepare)(sqlite3*,const char*,int,sqlite3_stmt**,const char**); - int (*prepare16)(sqlite3*,const void*,int,sqlite3_stmt**,const void**); - void * (*profile)(sqlite3*,void(*)(void*,const char*,sqlite_uint64),void*); - void (*progress_handler)(sqlite3*,int,int(*)(void*),void*); - void *(*realloc)(void*,int); - int (*reset)(sqlite3_stmt*pStmt); - void (*result_blob)(sqlite3_context*,const void*,int,void(*)(void*)); - void (*result_double)(sqlite3_context*,double); - void (*result_error)(sqlite3_context*,const char*,int); - void (*result_error16)(sqlite3_context*,const void*,int); - void (*result_int)(sqlite3_context*,int); - void (*result_int64)(sqlite3_context*,sqlite_int64); - void (*result_null)(sqlite3_context*); - void (*result_text)(sqlite3_context*,const char*,int,void(*)(void*)); - void (*result_text16)(sqlite3_context*,const void*,int,void(*)(void*)); - void (*result_text16be)(sqlite3_context*,const void*,int,void(*)(void*)); - void (*result_text16le)(sqlite3_context*,const void*,int,void(*)(void*)); - void (*result_value)(sqlite3_context*,sqlite3_value*); - void * (*rollback_hook)(sqlite3*,void(*)(void*),void*); - int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*,const char*,const char*),void*); - void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*)); - char * (*snprintf)(int,char*,const char*,...); - int (*step)(sqlite3_stmt*); - int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*,char const**,char const**,int*,int*,int*); - void (*thread_cleanup)(void); - int (*total_changes)(sqlite3*); - void * (*trace)(sqlite3*,void(*xTrace)(void*,const char*),void*); - int (*transfer_bindings)(sqlite3_stmt*,sqlite3_stmt*); - void * (*update_hook)(sqlite3*,void(*)(void*,int ,char const*,char const*,sqlite_int64),void*); - void * (*user_data)(sqlite3_context*); - const void * (*value_blob)(sqlite3_value*); - int (*value_bytes)(sqlite3_value*); - int (*value_bytes16)(sqlite3_value*); - double (*value_double)(sqlite3_value*); - int (*value_int)(sqlite3_value*); - sqlite_int64 (*value_int64)(sqlite3_value*); - int (*value_numeric_type)(sqlite3_value*); - const unsigned char * (*value_text)(sqlite3_value*); - const void * (*value_text16)(sqlite3_value*); - const void * (*value_text16be)(sqlite3_value*); - const void * (*value_text16le)(sqlite3_value*); - int (*value_type)(sqlite3_value*); - char *(*vmprintf)(const char*,va_list); - /* Added ??? */ - int (*overload_function)(sqlite3*, const char *zFuncName, int nArg); - /* Added by 3.3.13 */ - int (*prepare_v2)(sqlite3*,const char*,int,sqlite3_stmt**,const char**); - int (*prepare16_v2)(sqlite3*,const void*,int,sqlite3_stmt**,const void**); - int (*clear_bindings)(sqlite3_stmt*); - /* Added by 3.4.1 */ - int (*create_module_v2)(sqlite3*,const char*,const sqlite3_module*,void*,void (*xDestroy)(void *)); - /* Added by 3.5.0 */ - int (*bind_zeroblob)(sqlite3_stmt*,int,int); - int (*blob_bytes)(sqlite3_blob*); - int (*blob_close)(sqlite3_blob*); - int (*blob_open)(sqlite3*,const char*,const char*,const char*,sqlite3_int64,int,sqlite3_blob**); - int (*blob_read)(sqlite3_blob*,void*,int,int); - int (*blob_write)(sqlite3_blob*,const void*,int,int); - int (*create_collation_v2)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*),void(*)(void*)); - int (*file_control)(sqlite3*,const char*,int,void*); - sqlite3_int64 (*memory_highwater)(int); - sqlite3_int64 (*memory_used)(void); - sqlite3_mutex *(*mutex_alloc)(int); - void (*mutex_enter)(sqlite3_mutex*); - void (*mutex_free)(sqlite3_mutex*); - void (*mutex_leave)(sqlite3_mutex*); - int (*mutex_try)(sqlite3_mutex*); - int (*open_v2)(const char*,sqlite3**,int,const char*); - int (*release_memory)(int); - void (*result_error_nomem)(sqlite3_context*); - void (*result_error_toobig)(sqlite3_context*); - int (*sleep)(int); - void (*soft_heap_limit)(int); - sqlite3_vfs *(*vfs_find)(const char*); - int (*vfs_register)(sqlite3_vfs*,int); - int (*vfs_unregister)(sqlite3_vfs*); - int (*xthreadsafe)(void); - void (*result_zeroblob)(sqlite3_context*,int); - void (*result_error_code)(sqlite3_context*,int); - int (*test_control)(int, ...); - void (*randomness)(int,void*); - sqlite3 *(*context_db_handle)(sqlite3_context*); - int (*extended_result_codes)(sqlite3*,int); - int (*limit)(sqlite3*,int,int); - sqlite3_stmt *(*next_stmt)(sqlite3*,sqlite3_stmt*); - const char *(*sql)(sqlite3_stmt*); - int (*status)(int,int*,int*,int); - int (*backup_finish)(sqlite3_backup*); - sqlite3_backup *(*backup_init)(sqlite3*,const char*,sqlite3*,const char*); - int (*backup_pagecount)(sqlite3_backup*); - int (*backup_remaining)(sqlite3_backup*); - int (*backup_step)(sqlite3_backup*,int); - const char *(*compileoption_get)(int); - int (*compileoption_used)(const char*); - int (*create_function_v2)(sqlite3*,const char*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*),void(*xDestroy)(void*)); - int (*db_config)(sqlite3*,int,...); - sqlite3_mutex *(*db_mutex)(sqlite3*); - int (*db_status)(sqlite3*,int,int*,int*,int); - int (*extended_errcode)(sqlite3*); - void (*log)(int,const char*,...); - sqlite3_int64 (*soft_heap_limit64)(sqlite3_int64); - const char *(*sourceid)(void); - int (*stmt_status)(sqlite3_stmt*,int,int); - int (*strnicmp)(const char*,const char*,int); - int (*unlock_notify)(sqlite3*,void(*)(void**,int),void*); - int (*wal_autocheckpoint)(sqlite3*,int); - int (*wal_checkpoint)(sqlite3*,const char*); - void *(*wal_hook)(sqlite3*,int(*)(void*,sqlite3*,const char*,int),void*); +typedef struct DistinctCtx DistinctCtx; +struct DistinctCtx { + u8 isTnct; /* True if the DISTINCT keyword is present */ + u8 eTnctType; /* One of the WHERE_DISTINCT_* operators */ + int tabTnct; /* Ephemeral table used for DISTINCT processing */ + int addrTnct; /* Address of OP_OpenEphemeral opcode for tabTnct */ }; /* -** The following macros redefine the API routines so that they are -** redirected throught the global sqlite3_api structure. -** -** This header file is also used by the loadext.c source file -** (part of the main SQLite library - not an extension) so that -** it can get access to the sqlite3_api_routines structure -** definition. But the main library does not want to redefine -** the API. So the redefinition macros are only valid if the -** SQLITE_CORE macros is undefined. +** An instance of the following object is used to record information about +** the ORDER BY (or GROUP BY) clause of query is being coded. */ -#ifndef SQLITE_CORE -#define sqlite3_aggregate_context sqlite3_api->aggregate_context -#ifndef SQLITE_OMIT_DEPRECATED -#define sqlite3_aggregate_count sqlite3_api->aggregate_count -#endif -#define sqlite3_bind_blob sqlite3_api->bind_blob -#define sqlite3_bind_double sqlite3_api->bind_double -#define sqlite3_bind_int sqlite3_api->bind_int -#define sqlite3_bind_int64 sqlite3_api->bind_int64 -#define sqlite3_bind_null sqlite3_api->bind_null -#define sqlite3_bind_parameter_count sqlite3_api->bind_parameter_count -#define sqlite3_bind_parameter_index sqlite3_api->bind_parameter_index -#define sqlite3_bind_parameter_name sqlite3_api->bind_parameter_name -#define sqlite3_bind_text sqlite3_api->bind_text -#define sqlite3_bind_text16 sqlite3_api->bind_text16 -#define sqlite3_bind_value sqlite3_api->bind_value -#define sqlite3_busy_handler sqlite3_api->busy_handler -#define sqlite3_busy_timeout sqlite3_api->busy_timeout -#define sqlite3_changes sqlite3_api->changes -#define sqlite3_close sqlite3_api->close -#define sqlite3_collation_needed sqlite3_api->collation_needed -#define sqlite3_collation_needed16 sqlite3_api->collation_needed16 -#define sqlite3_column_blob sqlite3_api->column_blob -#define sqlite3_column_bytes sqlite3_api->column_bytes -#define sqlite3_column_bytes16 sqlite3_api->column_bytes16 -#define sqlite3_column_count sqlite3_api->column_count -#define sqlite3_column_database_name sqlite3_api->column_database_name -#define sqlite3_column_database_name16 sqlite3_api->column_database_name16 -#define sqlite3_column_decltype sqlite3_api->column_decltype -#define sqlite3_column_decltype16 sqlite3_api->column_decltype16 -#define sqlite3_column_double sqlite3_api->column_double -#define sqlite3_column_int sqlite3_api->column_int -#define sqlite3_column_int64 sqlite3_api->column_int64 -#define sqlite3_column_name sqlite3_api->column_name -#define sqlite3_column_name16 sqlite3_api->column_name16 -#define sqlite3_column_origin_name sqlite3_api->column_origin_name -#define sqlite3_column_origin_name16 sqlite3_api->column_origin_name16 -#define sqlite3_column_table_name sqlite3_api->column_table_name -#define sqlite3_column_table_name16 sqlite3_api->column_table_name16 -#define sqlite3_column_text sqlite3_api->column_text -#define sqlite3_column_text16 sqlite3_api->column_text16 -#define sqlite3_column_type sqlite3_api->column_type -#define sqlite3_column_value sqlite3_api->column_value -#define sqlite3_commit_hook sqlite3_api->commit_hook -#define sqlite3_complete sqlite3_api->complete -#define sqlite3_complete16 sqlite3_api->complete16 -#define sqlite3_create_collation sqlite3_api->create_collation -#define sqlite3_create_collation16 sqlite3_api->create_collation16 -#define sqlite3_create_function sqlite3_api->create_function -#define sqlite3_create_function16 sqlite3_api->create_function16 -#define sqlite3_create_module sqlite3_api->create_module -#define sqlite3_create_module_v2 sqlite3_api->create_module_v2 -#define sqlite3_data_count sqlite3_api->data_count -#define sqlite3_db_handle sqlite3_api->db_handle -#define sqlite3_declare_vtab sqlite3_api->declare_vtab -#define sqlite3_enable_shared_cache sqlite3_api->enable_shared_cache -#define sqlite3_errcode sqlite3_api->errcode -#define sqlite3_errmsg sqlite3_api->errmsg -#define sqlite3_errmsg16 sqlite3_api->errmsg16 -#define sqlite3_exec sqlite3_api->exec -#ifndef SQLITE_OMIT_DEPRECATED -#define sqlite3_expired sqlite3_api->expired -#endif -#define sqlite3_finalize sqlite3_api->finalize -#define sqlite3_free sqlite3_api->free -#define sqlite3_free_table sqlite3_api->free_table -#define sqlite3_get_autocommit sqlite3_api->get_autocommit -#define sqlite3_get_auxdata sqlite3_api->get_auxdata -#define sqlite3_get_table sqlite3_api->get_table -#ifndef SQLITE_OMIT_DEPRECATED -#define sqlite3_global_recover sqlite3_api->global_recover -#endif -#define sqlite3_interrupt sqlite3_api->interruptx -#define sqlite3_last_insert_rowid sqlite3_api->last_insert_rowid -#define sqlite3_libversion sqlite3_api->libversion -#define sqlite3_libversion_number sqlite3_api->libversion_number -#define sqlite3_malloc sqlite3_api->malloc -#define sqlite3_mprintf sqlite3_api->mprintf -#define sqlite3_open sqlite3_api->open -#define sqlite3_open16 sqlite3_api->open16 -#define sqlite3_prepare sqlite3_api->prepare -#define sqlite3_prepare16 sqlite3_api->prepare16 -#define sqlite3_prepare_v2 sqlite3_api->prepare_v2 -#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 -#define sqlite3_profile sqlite3_api->profile -#define sqlite3_progress_handler sqlite3_api->progress_handler -#define sqlite3_realloc sqlite3_api->realloc -#define sqlite3_reset sqlite3_api->reset -#define sqlite3_result_blob sqlite3_api->result_blob -#define sqlite3_result_double sqlite3_api->result_double -#define sqlite3_result_error sqlite3_api->result_error -#define sqlite3_result_error16 sqlite3_api->result_error16 -#define sqlite3_result_int sqlite3_api->result_int -#define sqlite3_result_int64 sqlite3_api->result_int64 -#define sqlite3_result_null sqlite3_api->result_null -#define sqlite3_result_text sqlite3_api->result_text -#define sqlite3_result_text16 sqlite3_api->result_text16 -#define sqlite3_result_text16be sqlite3_api->result_text16be -#define sqlite3_result_text16le sqlite3_api->result_text16le -#define sqlite3_result_value sqlite3_api->result_value -#define sqlite3_rollback_hook sqlite3_api->rollback_hook -#define sqlite3_set_authorizer sqlite3_api->set_authorizer -#define sqlite3_set_auxdata sqlite3_api->set_auxdata -#define sqlite3_snprintf sqlite3_api->snprintf -#define sqlite3_step sqlite3_api->step -#define sqlite3_table_column_metadata sqlite3_api->table_column_metadata -#define sqlite3_thread_cleanup sqlite3_api->thread_cleanup -#define sqlite3_total_changes sqlite3_api->total_changes -#define sqlite3_trace sqlite3_api->trace -#ifndef SQLITE_OMIT_DEPRECATED -#define sqlite3_transfer_bindings sqlite3_api->transfer_bindings -#endif -#define sqlite3_update_hook sqlite3_api->update_hook -#define sqlite3_user_data sqlite3_api->user_data -#define sqlite3_value_blob sqlite3_api->value_blob -#define sqlite3_value_bytes sqlite3_api->value_bytes -#define sqlite3_value_bytes16 sqlite3_api->value_bytes16 -#define sqlite3_value_double sqlite3_api->value_double -#define sqlite3_value_int sqlite3_api->value_int -#define sqlite3_value_int64 sqlite3_api->value_int64 -#define sqlite3_value_numeric_type sqlite3_api->value_numeric_type -#define sqlite3_value_text sqlite3_api->value_text -#define sqlite3_value_text16 sqlite3_api->value_text16 -#define sqlite3_value_text16be sqlite3_api->value_text16be -#define sqlite3_value_text16le sqlite3_api->value_text16le -#define sqlite3_value_type sqlite3_api->value_type -#define sqlite3_vmprintf sqlite3_api->vmprintf -#define sqlite3_overload_function sqlite3_api->overload_function -#define sqlite3_prepare_v2 sqlite3_api->prepare_v2 -#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 -#define sqlite3_clear_bindings sqlite3_api->clear_bindings -#define sqlite3_bind_zeroblob sqlite3_api->bind_zeroblob -#define sqlite3_blob_bytes sqlite3_api->blob_bytes -#define sqlite3_blob_close sqlite3_api->blob_close -#define sqlite3_blob_open sqlite3_api->blob_open -#define sqlite3_blob_read sqlite3_api->blob_read -#define sqlite3_blob_write sqlite3_api->blob_write -#define sqlite3_create_collation_v2 sqlite3_api->create_collation_v2 -#define sqlite3_file_control sqlite3_api->file_control -#define sqlite3_memory_highwater sqlite3_api->memory_highwater -#define sqlite3_memory_used sqlite3_api->memory_used -#define sqlite3_mutex_alloc sqlite3_api->mutex_alloc -#define sqlite3_mutex_enter sqlite3_api->mutex_enter -#define sqlite3_mutex_free sqlite3_api->mutex_free -#define sqlite3_mutex_leave sqlite3_api->mutex_leave -#define sqlite3_mutex_try sqlite3_api->mutex_try -#define sqlite3_open_v2 sqlite3_api->open_v2 -#define sqlite3_release_memory sqlite3_api->release_memory -#define sqlite3_result_error_nomem sqlite3_api->result_error_nomem -#define sqlite3_result_error_toobig sqlite3_api->result_error_toobig -#define sqlite3_sleep sqlite3_api->sleep -#define sqlite3_soft_heap_limit sqlite3_api->soft_heap_limit -#define sqlite3_vfs_find sqlite3_api->vfs_find -#define sqlite3_vfs_register sqlite3_api->vfs_register -#define sqlite3_vfs_unregister sqlite3_api->vfs_unregister -#define sqlite3_threadsafe sqlite3_api->xthreadsafe -#define sqlite3_result_zeroblob sqlite3_api->result_zeroblob -#define sqlite3_result_error_code sqlite3_api->result_error_code -#define sqlite3_test_control sqlite3_api->test_control -#define sqlite3_randomness sqlite3_api->randomness -#define sqlite3_context_db_handle sqlite3_api->context_db_handle -#define sqlite3_extended_result_codes sqlite3_api->extended_result_codes -#define sqlite3_limit sqlite3_api->limit -#define sqlite3_next_stmt sqlite3_api->next_stmt -#define sqlite3_sql sqlite3_api->sql -#define sqlite3_status sqlite3_api->status -#define sqlite3_backup_finish sqlite3_api->backup_finish -#define sqlite3_backup_init sqlite3_api->backup_init -#define sqlite3_backup_pagecount sqlite3_api->backup_pagecount -#define sqlite3_backup_remaining sqlite3_api->backup_remaining -#define sqlite3_backup_step sqlite3_api->backup_step -#define sqlite3_compileoption_get sqlite3_api->compileoption_get -#define sqlite3_compileoption_used sqlite3_api->compileoption_used -#define sqlite3_create_function_v2 sqlite3_api->create_function_v2 -#define sqlite3_db_config sqlite3_api->db_config -#define sqlite3_db_mutex sqlite3_api->db_mutex -#define sqlite3_db_status sqlite3_api->db_status -#define sqlite3_extended_errcode sqlite3_api->extended_errcode -#define sqlite3_log sqlite3_api->log -#define sqlite3_soft_heap_limit64 sqlite3_api->soft_heap_limit64 -#define sqlite3_sourceid sqlite3_api->sourceid -#define sqlite3_stmt_status sqlite3_api->stmt_status -#define sqlite3_strnicmp sqlite3_api->strnicmp -#define sqlite3_unlock_notify sqlite3_api->unlock_notify -#define sqlite3_wal_autocheckpoint sqlite3_api->wal_autocheckpoint -#define sqlite3_wal_checkpoint sqlite3_api->wal_checkpoint -#define sqlite3_wal_hook sqlite3_api->wal_hook -#endif /* SQLITE_CORE */ - -#define SQLITE_EXTENSION_INIT1 const sqlite3_api_routines *sqlite3_api = 0; -#define SQLITE_EXTENSION_INIT2(v) sqlite3_api = v; - -#endif /* _SQLITE3EXT_H_ */ - -/************** End of sqlite3ext.h ******************************************/ -/************** Continuing where we left off in loadext.c ********************/ - -#ifndef SQLITE_OMIT_LOAD_EXTENSION +typedef struct SortCtx SortCtx; +struct SortCtx { + ExprList *pOrderBy; /* The ORDER BY (or GROUP BY clause) */ + int nOBSat; /* Number of ORDER BY terms satisfied by indices */ + int iECursor; /* Cursor number for the sorter */ + int regReturn; /* Register holding block-output return address */ + int labelBkOut; /* Start label for the block-output subroutine */ + int addrSortIndex; /* Address of the OP_SorterOpen or OP_OpenEphemeral */ + u8 sortFlags; /* Zero or more SORTFLAG_* bits */ +}; +#define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */ /* -** Some API routines are omitted when various features are -** excluded from a build of SQLite. Substitute a NULL pointer -** for any missing APIs. +** Delete all the content of a Select structure but do not deallocate +** the select structure itself. */ -#ifndef SQLITE_ENABLE_COLUMN_METADATA -# define sqlite3_column_database_name 0 -# define sqlite3_column_database_name16 0 -# define sqlite3_column_table_name 0 -# define sqlite3_column_table_name16 0 -# define sqlite3_column_origin_name 0 -# define sqlite3_column_origin_name16 0 -# define sqlite3_table_column_metadata 0 -#endif - -#ifdef SQLITE_OMIT_AUTHORIZATION -# define sqlite3_set_authorizer 0 -#endif +static void clearSelect(sqlite3 *db, Select *p){ + sqlite3ExprListDelete(db, p->pEList); + sqlite3SrcListDelete(db, p->pSrc); + sqlite3ExprDelete(db, p->pWhere); + sqlite3ExprListDelete(db, p->pGroupBy); + sqlite3ExprDelete(db, p->pHaving); + sqlite3ExprListDelete(db, p->pOrderBy); + sqlite3SelectDelete(db, p->pPrior); + sqlite3ExprDelete(db, p->pLimit); + sqlite3ExprDelete(db, p->pOffset); + sqlite3WithDelete(db, p->pWith); +} -#ifdef SQLITE_OMIT_UTF16 -# define sqlite3_bind_text16 0 -# define sqlite3_collation_needed16 0 -# define sqlite3_column_decltype16 0 -# define sqlite3_column_name16 0 -# define sqlite3_column_text16 0 -# define sqlite3_complete16 0 -# define sqlite3_create_collation16 0 -# define sqlite3_create_function16 0 -# define sqlite3_errmsg16 0 -# define sqlite3_open16 0 -# define sqlite3_prepare16 0 -# define sqlite3_prepare16_v2 0 -# define sqlite3_result_error16 0 -# define sqlite3_result_text16 0 -# define sqlite3_result_text16be 0 -# define sqlite3_result_text16le 0 -# define sqlite3_value_text16 0 -# define sqlite3_value_text16be 0 -# define sqlite3_value_text16le 0 -# define sqlite3_column_database_name16 0 -# define sqlite3_column_table_name16 0 -# define sqlite3_column_origin_name16 0 -#endif +/* +** Initialize a SelectDest structure. +*/ +SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){ + pDest->eDest = (u8)eDest; + pDest->iSDParm = iParm; + pDest->affSdst = 0; + pDest->iSdst = 0; + pDest->nSdst = 0; +} -#ifdef SQLITE_OMIT_COMPLETE -# define sqlite3_complete 0 -# define sqlite3_complete16 0 -#endif -#ifdef SQLITE_OMIT_DECLTYPE -# define sqlite3_column_decltype16 0 -# define sqlite3_column_decltype 0 -#endif +/* +** Allocate a new Select structure and return a pointer to that +** structure. +*/ +SQLITE_PRIVATE Select *sqlite3SelectNew( + Parse *pParse, /* Parsing context */ + ExprList *pEList, /* which columns to include in the result */ + SrcList *pSrc, /* the FROM clause -- which tables to scan */ + Expr *pWhere, /* the WHERE clause */ + ExprList *pGroupBy, /* the GROUP BY clause */ + Expr *pHaving, /* the HAVING clause */ + ExprList *pOrderBy, /* the ORDER BY clause */ + u16 selFlags, /* Flag parameters, such as SF_Distinct */ + Expr *pLimit, /* LIMIT value. NULL means not used */ + Expr *pOffset /* OFFSET value. NULL means no offset */ +){ + Select *pNew; + Select standin; + sqlite3 *db = pParse->db; + pNew = sqlite3DbMallocZero(db, sizeof(*pNew) ); + assert( db->mallocFailed || !pOffset || pLimit ); /* OFFSET implies LIMIT */ + if( pNew==0 ){ + assert( db->mallocFailed ); + pNew = &standin; + memset(pNew, 0, sizeof(*pNew)); + } + if( pEList==0 ){ + pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ALL,0)); + } + pNew->pEList = pEList; + if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc)); + pNew->pSrc = pSrc; + pNew->pWhere = pWhere; + pNew->pGroupBy = pGroupBy; + pNew->pHaving = pHaving; + pNew->pOrderBy = pOrderBy; + pNew->selFlags = selFlags; + pNew->op = TK_SELECT; + pNew->pLimit = pLimit; + pNew->pOffset = pOffset; + assert( pOffset==0 || pLimit!=0 ); + pNew->addrOpenEphm[0] = -1; + pNew->addrOpenEphm[1] = -1; + if( db->mallocFailed ) { + clearSelect(db, pNew); + if( pNew!=&standin ) sqlite3DbFree(db, pNew); + pNew = 0; + }else{ + assert( pNew->pSrc!=0 || pParse->nErr>0 ); + } + assert( pNew!=&standin ); + return pNew; +} -#ifdef SQLITE_OMIT_PROGRESS_CALLBACK -# define sqlite3_progress_handler 0 +#if SELECTTRACE_ENABLED +/* +** Set the name of a Select object +*/ +SQLITE_PRIVATE void sqlite3SelectSetName(Select *p, const char *zName){ + if( p && zName ){ + sqlite3_snprintf(sizeof(p->zSelName), p->zSelName, "%s", zName); + } +} #endif -#ifdef SQLITE_OMIT_VIRTUALTABLE -# define sqlite3_create_module 0 -# define sqlite3_create_module_v2 0 -# define sqlite3_declare_vtab 0 -#endif -#ifdef SQLITE_OMIT_SHARED_CACHE -# define sqlite3_enable_shared_cache 0 -#endif +/* +** Delete the given Select structure and all of its substructures. +*/ +SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){ + if( p ){ + clearSelect(db, p); + sqlite3DbFree(db, p); + } +} -#ifdef SQLITE_OMIT_TRACE -# define sqlite3_profile 0 -# define sqlite3_trace 0 -#endif +/* +** Return a pointer to the right-most SELECT statement in a compound. +*/ +static Select *findRightmost(Select *p){ + while( p->pNext ) p = p->pNext; + return p; +} -#ifdef SQLITE_OMIT_GET_TABLE -# define sqlite3_free_table 0 -# define sqlite3_get_table 0 -#endif +/* +** Given 1 to 3 identifiers preceding the JOIN keyword, determine the +** type of join. Return an integer constant that expresses that type +** in terms of the following bit values: +** +** JT_INNER +** JT_CROSS +** JT_OUTER +** JT_NATURAL +** JT_LEFT +** JT_RIGHT +** +** A full outer join is the combination of JT_LEFT and JT_RIGHT. +** +** If an illegal or unsupported join type is seen, then still return +** a join type, but put an error in the pParse structure. +*/ +SQLITE_PRIVATE int sqlite3JoinType(Parse *pParse, Token *pA, Token *pB, Token *pC){ + int jointype = 0; + Token *apAll[3]; + Token *p; + /* 0123456789 123456789 123456789 123 */ + static const char zKeyText[] = "naturaleftouterightfullinnercross"; + static const struct { + u8 i; /* Beginning of keyword text in zKeyText[] */ + u8 nChar; /* Length of the keyword in characters */ + u8 code; /* Join type mask */ + } aKeyword[] = { + /* natural */ { 0, 7, JT_NATURAL }, + /* left */ { 6, 4, JT_LEFT|JT_OUTER }, + /* outer */ { 10, 5, JT_OUTER }, + /* right */ { 14, 5, JT_RIGHT|JT_OUTER }, + /* full */ { 19, 4, JT_LEFT|JT_RIGHT|JT_OUTER }, + /* inner */ { 23, 5, JT_INNER }, + /* cross */ { 28, 5, JT_INNER|JT_CROSS }, + }; + int i, j; + apAll[0] = pA; + apAll[1] = pB; + apAll[2] = pC; + for(i=0; i<3 && apAll[i]; i++){ + p = apAll[i]; + for(j=0; jn==aKeyword[j].nChar + && sqlite3StrNICmp((char*)p->z, &zKeyText[aKeyword[j].i], p->n)==0 ){ + jointype |= aKeyword[j].code; + break; + } + } + testcase( j==0 || j==1 || j==2 || j==3 || j==4 || j==5 || j==6 ); + if( j>=ArraySize(aKeyword) ){ + jointype |= JT_ERROR; + break; + } + } + if( + (jointype & (JT_INNER|JT_OUTER))==(JT_INNER|JT_OUTER) || + (jointype & JT_ERROR)!=0 + ){ + const char *zSp = " "; + assert( pB!=0 ); + if( pC==0 ){ zSp++; } + sqlite3ErrorMsg(pParse, "unknown or unsupported join type: " + "%T %T%s%T", pA, pB, zSp, pC); + jointype = JT_INNER; + }else if( (jointype & JT_OUTER)!=0 + && (jointype & (JT_LEFT|JT_RIGHT))!=JT_LEFT ){ + sqlite3ErrorMsg(pParse, + "RIGHT and FULL OUTER JOINs are not currently supported"); + jointype = JT_INNER; + } + return jointype; +} -#ifdef SQLITE_OMIT_INCRBLOB -#define sqlite3_bind_zeroblob 0 -#define sqlite3_blob_bytes 0 -#define sqlite3_blob_close 0 -#define sqlite3_blob_open 0 -#define sqlite3_blob_read 0 -#define sqlite3_blob_write 0 -#endif +/* +** Return the index of a column in a table. Return -1 if the column +** is not contained in the table. +*/ +static int columnIndex(Table *pTab, const char *zCol){ + int i; + for(i=0; inCol; i++){ + if( sqlite3StrICmp(pTab->aCol[i].zName, zCol)==0 ) return i; + } + return -1; +} /* -** The following structure contains pointers to all SQLite API routines. -** A pointer to this structure is passed into extensions when they are -** loaded so that the extension can make calls back into the SQLite -** library. +** Search the first N tables in pSrc, from left to right, looking for a +** table that has a column named zCol. ** -** When adding new APIs, add them to the bottom of this structure -** in order to preserve backwards compatibility. +** When found, set *piTab and *piCol to the table index and column index +** of the matching column and return TRUE. ** -** Extensions that use newer APIs should first call the -** sqlite3_libversion_number() to make sure that the API they -** intend to use is supported by the library. Extensions should -** also check to make sure that the pointer to the function is -** not NULL before calling it. +** If not found, return FALSE. */ -static const sqlite3_api_routines sqlite3Apis = { - sqlite3_aggregate_context, -#ifndef SQLITE_OMIT_DEPRECATED - sqlite3_aggregate_count, -#else - 0, -#endif - sqlite3_bind_blob, - sqlite3_bind_double, - sqlite3_bind_int, - sqlite3_bind_int64, - sqlite3_bind_null, - sqlite3_bind_parameter_count, - sqlite3_bind_parameter_index, - sqlite3_bind_parameter_name, - sqlite3_bind_text, - sqlite3_bind_text16, - sqlite3_bind_value, - sqlite3_busy_handler, - sqlite3_busy_timeout, - sqlite3_changes, - sqlite3_close, - sqlite3_collation_needed, - sqlite3_collation_needed16, - sqlite3_column_blob, - sqlite3_column_bytes, - sqlite3_column_bytes16, - sqlite3_column_count, - sqlite3_column_database_name, - sqlite3_column_database_name16, - sqlite3_column_decltype, - sqlite3_column_decltype16, - sqlite3_column_double, - sqlite3_column_int, - sqlite3_column_int64, - sqlite3_column_name, - sqlite3_column_name16, - sqlite3_column_origin_name, - sqlite3_column_origin_name16, - sqlite3_column_table_name, - sqlite3_column_table_name16, - sqlite3_column_text, - sqlite3_column_text16, - sqlite3_column_type, - sqlite3_column_value, - sqlite3_commit_hook, - sqlite3_complete, - sqlite3_complete16, - sqlite3_create_collation, - sqlite3_create_collation16, - sqlite3_create_function, - sqlite3_create_function16, - sqlite3_create_module, - sqlite3_data_count, - sqlite3_db_handle, - sqlite3_declare_vtab, - sqlite3_enable_shared_cache, - sqlite3_errcode, - sqlite3_errmsg, - sqlite3_errmsg16, - sqlite3_exec, -#ifndef SQLITE_OMIT_DEPRECATED - sqlite3_expired, -#else - 0, -#endif - sqlite3_finalize, - sqlite3_free, - sqlite3_free_table, - sqlite3_get_autocommit, - sqlite3_get_auxdata, - sqlite3_get_table, - 0, /* Was sqlite3_global_recover(), but that function is deprecated */ - sqlite3_interrupt, - sqlite3_last_insert_rowid, - sqlite3_libversion, - sqlite3_libversion_number, - sqlite3_malloc, - sqlite3_mprintf, - sqlite3_open, - sqlite3_open16, - sqlite3_prepare, - sqlite3_prepare16, - sqlite3_profile, - sqlite3_progress_handler, - sqlite3_realloc, - sqlite3_reset, - sqlite3_result_blob, - sqlite3_result_double, - sqlite3_result_error, - sqlite3_result_error16, - sqlite3_result_int, - sqlite3_result_int64, - sqlite3_result_null, - sqlite3_result_text, - sqlite3_result_text16, - sqlite3_result_text16be, - sqlite3_result_text16le, - sqlite3_result_value, - sqlite3_rollback_hook, - sqlite3_set_authorizer, - sqlite3_set_auxdata, - sqlite3_snprintf, - sqlite3_step, - sqlite3_table_column_metadata, -#ifndef SQLITE_OMIT_DEPRECATED - sqlite3_thread_cleanup, -#else - 0, -#endif - sqlite3_total_changes, - sqlite3_trace, -#ifndef SQLITE_OMIT_DEPRECATED - sqlite3_transfer_bindings, -#else - 0, -#endif - sqlite3_update_hook, - sqlite3_user_data, - sqlite3_value_blob, - sqlite3_value_bytes, - sqlite3_value_bytes16, - sqlite3_value_double, - sqlite3_value_int, - sqlite3_value_int64, - sqlite3_value_numeric_type, - sqlite3_value_text, - sqlite3_value_text16, - sqlite3_value_text16be, - sqlite3_value_text16le, - sqlite3_value_type, - sqlite3_vmprintf, - /* - ** The original API set ends here. All extensions can call any - ** of the APIs above provided that the pointer is not NULL. But - ** before calling APIs that follow, extension should check the - ** sqlite3_libversion_number() to make sure they are dealing with - ** a library that is new enough to support that API. - ************************************************************************* - */ - sqlite3_overload_function, +static int tableAndColumnIndex( + SrcList *pSrc, /* Array of tables to search */ + int N, /* Number of tables in pSrc->a[] to search */ + const char *zCol, /* Name of the column we are looking for */ + int *piTab, /* Write index of pSrc->a[] here */ + int *piCol /* Write index of pSrc->a[*piTab].pTab->aCol[] here */ +){ + int i; /* For looping over tables in pSrc */ + int iCol; /* Index of column matching zCol */ - /* - ** Added after 3.3.13 - */ - sqlite3_prepare_v2, - sqlite3_prepare16_v2, - sqlite3_clear_bindings, + assert( (piTab==0)==(piCol==0) ); /* Both or neither are NULL */ + for(i=0; ia[i].pTab, zCol); + if( iCol>=0 ){ + if( piTab ){ + *piTab = i; + *piCol = iCol; + } + return 1; + } + } + return 0; +} - /* - ** Added for 3.4.1 - */ - sqlite3_create_module_v2, +/* +** This function is used to add terms implied by JOIN syntax to the +** WHERE clause expression of a SELECT statement. The new term, which +** is ANDed with the existing WHERE clause, is of the form: +** +** (tab1.col1 = tab2.col2) +** +** where tab1 is the iSrc'th table in SrcList pSrc and tab2 is the +** (iSrc+1)'th. Column col1 is column iColLeft of tab1, and col2 is +** column iColRight of tab2. +*/ +static void addWhereTerm( + Parse *pParse, /* Parsing context */ + SrcList *pSrc, /* List of tables in FROM clause */ + int iLeft, /* Index of first table to join in pSrc */ + int iColLeft, /* Index of column in first table */ + int iRight, /* Index of second table in pSrc */ + int iColRight, /* Index of column in second table */ + int isOuterJoin, /* True if this is an OUTER join */ + Expr **ppWhere /* IN/OUT: The WHERE clause to add to */ +){ + sqlite3 *db = pParse->db; + Expr *pE1; + Expr *pE2; + Expr *pEq; - /* - ** Added for 3.5.0 - */ - sqlite3_bind_zeroblob, - sqlite3_blob_bytes, - sqlite3_blob_close, - sqlite3_blob_open, - sqlite3_blob_read, - sqlite3_blob_write, - sqlite3_create_collation_v2, - sqlite3_file_control, - sqlite3_memory_highwater, - sqlite3_memory_used, -#ifdef SQLITE_MUTEX_OMIT - 0, - 0, - 0, - 0, - 0, -#else - sqlite3_mutex_alloc, - sqlite3_mutex_enter, - sqlite3_mutex_free, - sqlite3_mutex_leave, - sqlite3_mutex_try, -#endif - sqlite3_open_v2, - sqlite3_release_memory, - sqlite3_result_error_nomem, - sqlite3_result_error_toobig, - sqlite3_sleep, - sqlite3_soft_heap_limit, - sqlite3_vfs_find, - sqlite3_vfs_register, - sqlite3_vfs_unregister, + assert( iLeftnSrc>iRight ); + assert( pSrc->a[iLeft].pTab ); + assert( pSrc->a[iRight].pTab ); - /* - ** Added for 3.5.8 - */ - sqlite3_threadsafe, - sqlite3_result_zeroblob, - sqlite3_result_error_code, - sqlite3_test_control, - sqlite3_randomness, - sqlite3_context_db_handle, + pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft); + pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight); - /* - ** Added for 3.6.0 - */ - sqlite3_extended_result_codes, - sqlite3_limit, - sqlite3_next_stmt, - sqlite3_sql, - sqlite3_status, + pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2, 0); + if( pEq && isOuterJoin ){ + ExprSetProperty(pEq, EP_FromJoin); + assert( !ExprHasProperty(pEq, EP_TokenOnly|EP_Reduced) ); + ExprSetVVAProperty(pEq, EP_NoReduce); + pEq->iRightJoinTable = (i16)pE2->iTable; + } + *ppWhere = sqlite3ExprAnd(db, *ppWhere, pEq); +} - /* - ** Added for 3.7.4 - */ - sqlite3_backup_finish, - sqlite3_backup_init, - sqlite3_backup_pagecount, - sqlite3_backup_remaining, - sqlite3_backup_step, -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS - sqlite3_compileoption_get, - sqlite3_compileoption_used, -#else - 0, - 0, -#endif - sqlite3_create_function_v2, - sqlite3_db_config, - sqlite3_db_mutex, - sqlite3_db_status, - sqlite3_extended_errcode, - sqlite3_log, - sqlite3_soft_heap_limit64, - sqlite3_sourceid, - sqlite3_stmt_status, - sqlite3_strnicmp, -#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY - sqlite3_unlock_notify, -#else - 0, -#endif -#ifndef SQLITE_OMIT_WAL - sqlite3_wal_autocheckpoint, - sqlite3_wal_checkpoint, - sqlite3_wal_hook, -#else - 0, - 0, - 0, -#endif -}; +/* +** Set the EP_FromJoin property on all terms of the given expression. +** And set the Expr.iRightJoinTable to iTable for every term in the +** expression. +** +** The EP_FromJoin property is used on terms of an expression to tell +** the LEFT OUTER JOIN processing logic that this term is part of the +** join restriction specified in the ON or USING clause and not a part +** of the more general WHERE clause. These terms are moved over to the +** WHERE clause during join processing but we need to remember that they +** originated in the ON or USING clause. +** +** The Expr.iRightJoinTable tells the WHERE clause processing that the +** expression depends on table iRightJoinTable even if that table is not +** explicitly mentioned in the expression. That information is needed +** for cases like this: +** +** SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.b AND t1.x=5 +** +** The where clause needs to defer the handling of the t1.x=5 +** term until after the t2 loop of the join. In that way, a +** NULL t2 row will be inserted whenever t1.x!=5. If we do not +** defer the handling of t1.x=5, it will be processed immediately +** after the t1 loop and rows with t1.x!=5 will never appear in +** the output, which is incorrect. +*/ +static void setJoinExpr(Expr *p, int iTable){ + while( p ){ + ExprSetProperty(p, EP_FromJoin); + assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) ); + ExprSetVVAProperty(p, EP_NoReduce); + p->iRightJoinTable = (i16)iTable; + setJoinExpr(p->pLeft, iTable); + p = p->pRight; + } +} /* -** Attempt to load an SQLite extension library contained in the file -** zFile. The entry point is zProc. zProc may be 0 in which case a -** default entry point name (sqlite3_extension_init) is used. Use -** of the default name is recommended. +** This routine processes the join information for a SELECT statement. +** ON and USING clauses are converted into extra terms of the WHERE clause. +** NATURAL joins also create extra WHERE clause terms. ** -** Return SQLITE_OK on success and SQLITE_ERROR if something goes wrong. +** The terms of a FROM clause are contained in the Select.pSrc structure. +** The left most table is the first entry in Select.pSrc. The right-most +** table is the last entry. The join operator is held in the entry to +** the left. Thus entry 0 contains the join operator for the join between +** entries 0 and 1. Any ON or USING clauses associated with the join are +** also attached to the left entry. ** -** If an error occurs and pzErrMsg is not 0, then fill *pzErrMsg with -** error message text. The calling function should free this memory -** by calling sqlite3DbFree(db, ). +** This routine returns the number of errors encountered. */ -static int sqlite3LoadExtension( - sqlite3 *db, /* Load the extension into this database connection */ - const char *zFile, /* Name of the shared library containing extension */ - const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */ - char **pzErrMsg /* Put error message here if not 0 */ -){ - sqlite3_vfs *pVfs = db->pVfs; - void *handle; - int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*); - char *zErrmsg = 0; - void **aHandle; - const int nMsg = 300; +static int sqliteProcessJoin(Parse *pParse, Select *p){ + SrcList *pSrc; /* All tables in the FROM clause */ + int i, j; /* Loop counters */ + struct SrcList_item *pLeft; /* Left table being joined */ + struct SrcList_item *pRight; /* Right table being joined */ - if( pzErrMsg ) *pzErrMsg = 0; + pSrc = p->pSrc; + pLeft = &pSrc->a[0]; + pRight = &pLeft[1]; + for(i=0; inSrc-1; i++, pRight++, pLeft++){ + Table *pLeftTab = pLeft->pTab; + Table *pRightTab = pRight->pTab; + int isOuter; - /* Ticket #1863. To avoid a creating security problems for older - ** applications that relink against newer versions of SQLite, the - ** ability to run load_extension is turned off by default. One - ** must call sqlite3_enable_load_extension() to turn on extension - ** loading. Otherwise you get the following error. - */ - if( (db->flags & SQLITE_LoadExtension)==0 ){ - if( pzErrMsg ){ - *pzErrMsg = sqlite3_mprintf("not authorized"); - } - return SQLITE_ERROR; - } + if( NEVER(pLeftTab==0 || pRightTab==0) ) continue; + isOuter = (pRight->jointype & JT_OUTER)!=0; - if( zProc==0 ){ - zProc = "sqlite3_extension_init"; - } + /* When the NATURAL keyword is present, add WHERE clause terms for + ** every column that the two tables have in common. + */ + if( pRight->jointype & JT_NATURAL ){ + if( pRight->pOn || pRight->pUsing ){ + sqlite3ErrorMsg(pParse, "a NATURAL join may not have " + "an ON or USING clause", 0); + return 1; + } + for(j=0; jnCol; j++){ + char *zName; /* Name of column in the right table */ + int iLeft; /* Matching left table */ + int iLeftCol; /* Matching column in the left table */ - handle = sqlite3OsDlOpen(pVfs, zFile); - if( handle==0 ){ - if( pzErrMsg ){ - *pzErrMsg = zErrmsg = sqlite3_malloc(nMsg); - if( zErrmsg ){ - sqlite3_snprintf(nMsg, zErrmsg, - "unable to open shared library [%s]", zFile); - sqlite3OsDlError(pVfs, nMsg-1, zErrmsg); + zName = pRightTab->aCol[j].zName; + if( tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol) ){ + addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, j, + isOuter, &p->pWhere); + } } } - return SQLITE_ERROR; - } - xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*)) - sqlite3OsDlSym(pVfs, handle, zProc); - if( xInit==0 ){ - if( pzErrMsg ){ - *pzErrMsg = zErrmsg = sqlite3_malloc(nMsg); - if( zErrmsg ){ - sqlite3_snprintf(nMsg, zErrmsg, - "no entry point [%s] in shared library [%s]", zProc,zFile); - sqlite3OsDlError(pVfs, nMsg-1, zErrmsg); - } - sqlite3OsDlClose(pVfs, handle); + + /* Disallow both ON and USING clauses in the same join + */ + if( pRight->pOn && pRight->pUsing ){ + sqlite3ErrorMsg(pParse, "cannot have both ON and USING " + "clauses in the same join"); + return 1; } - return SQLITE_ERROR; - }else if( xInit(db, &zErrmsg, &sqlite3Apis) ){ - if( pzErrMsg ){ - *pzErrMsg = sqlite3_mprintf("error during initialization: %s", zErrmsg); + + /* Add the ON clause to the end of the WHERE clause, connected by + ** an AND operator. + */ + if( pRight->pOn ){ + if( isOuter ) setJoinExpr(pRight->pOn, pRight->iCursor); + p->pWhere = sqlite3ExprAnd(pParse->db, p->pWhere, pRight->pOn); + pRight->pOn = 0; } - sqlite3_free(zErrmsg); - sqlite3OsDlClose(pVfs, handle); - return SQLITE_ERROR; - } - /* Append the new shared library handle to the db->aExtension array. */ - aHandle = sqlite3DbMallocZero(db, sizeof(handle)*(db->nExtension+1)); - if( aHandle==0 ){ - return SQLITE_NOMEM; - } - if( db->nExtension>0 ){ - memcpy(aHandle, db->aExtension, sizeof(handle)*db->nExtension); - } - sqlite3DbFree(db, db->aExtension); - db->aExtension = aHandle; + /* Create extra terms on the WHERE clause for each column named + ** in the USING clause. Example: If the two tables to be joined are + ** A and B and the USING clause names X, Y, and Z, then add this + ** to the WHERE clause: A.X=B.X AND A.Y=B.Y AND A.Z=B.Z + ** Report an error if any column mentioned in the USING clause is + ** not contained in both tables to be joined. + */ + if( pRight->pUsing ){ + IdList *pList = pRight->pUsing; + for(j=0; jnId; j++){ + char *zName; /* Name of the term in the USING clause */ + int iLeft; /* Table on the left with matching column name */ + int iLeftCol; /* Column number of matching column on the left */ + int iRightCol; /* Column number of matching column on the right */ - db->aExtension[db->nExtension++] = handle; - return SQLITE_OK; -} -SQLITE_API int sqlite3_load_extension( - sqlite3 *db, /* Load the extension into this database connection */ - const char *zFile, /* Name of the shared library containing extension */ - const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */ - char **pzErrMsg /* Put error message here if not 0 */ -){ - int rc; - sqlite3_mutex_enter(db->mutex); - rc = sqlite3LoadExtension(db, zFile, zProc, pzErrMsg); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + zName = pList->a[j].zName; + iRightCol = columnIndex(pRightTab, zName); + if( iRightCol<0 + || !tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol) + ){ + sqlite3ErrorMsg(pParse, "cannot join using column %s - column " + "not present in both tables", zName); + return 1; + } + addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, iRightCol, + isOuter, &p->pWhere); + } + } + } + return 0; } +/* Forward reference */ +static KeyInfo *keyInfoFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* Form the KeyInfo object from this ExprList */ + int iStart, /* Begin with this column of pList */ + int nExtra /* Add this many extra columns to the end */ +); + /* -** Call this routine when the database connection is closing in order -** to clean up loaded extensions +** Generate code that will push the record in registers regData +** through regData+nData-1 onto the sorter. */ -SQLITE_PRIVATE void sqlite3CloseExtensions(sqlite3 *db){ - int i; - assert( sqlite3_mutex_held(db->mutex) ); - for(i=0; inExtension; i++){ - sqlite3OsDlClose(db->pVfs, db->aExtension[i]); +static void pushOntoSorter( + Parse *pParse, /* Parser context */ + SortCtx *pSort, /* Information about the ORDER BY clause */ + Select *pSelect, /* The whole SELECT statement */ + int regData, /* First register holding data to be sorted */ + int nData, /* Number of elements in the data array */ + int nPrefixReg /* No. of reg prior to regData available for use */ +){ + Vdbe *v = pParse->pVdbe; /* Stmt under construction */ + int bSeq = ((pSort->sortFlags & SORTFLAG_UseSorter)==0); + int nExpr = pSort->pOrderBy->nExpr; /* No. of ORDER BY terms */ + int nBase = nExpr + bSeq + nData; /* Fields in sorter record */ + int regBase; /* Regs for sorter record */ + int regRecord = ++pParse->nMem; /* Assembled sorter record */ + int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */ + int op; /* Opcode to add sorter record to sorter */ + + assert( bSeq==0 || bSeq==1 ); + if( nPrefixReg ){ + assert( nPrefixReg==nExpr+bSeq ); + regBase = regData - nExpr - bSeq; + }else{ + regBase = pParse->nMem + 1; + pParse->nMem += nBase; + } + sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, SQLITE_ECEL_DUP); + if( bSeq ){ + sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr); + } + if( nPrefixReg==0 ){ + sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); + } + + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord); + if( nOBSat>0 ){ + int regPrevKey; /* The first nOBSat columns of the previous row */ + int addrFirst; /* Address of the OP_IfNot opcode */ + int addrJmp; /* Address of the OP_Jump opcode */ + VdbeOp *pOp; /* Opcode that opens the sorter */ + int nKey; /* Number of sorting key columns, including OP_Sequence */ + KeyInfo *pKI; /* Original KeyInfo on the sorter table */ + + regPrevKey = pParse->nMem+1; + pParse->nMem += pSort->nOBSat; + nKey = nExpr - pSort->nOBSat + bSeq; + if( bSeq ){ + addrFirst = sqlite3VdbeAddOp1(v, OP_IfNot, regBase+nExpr); + }else{ + addrFirst = sqlite3VdbeAddOp1(v, OP_SequenceTest, pSort->iECursor); + } + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Compare, regPrevKey, regBase, pSort->nOBSat); + pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + if( pParse->db->mallocFailed ) return; + pOp->p2 = nKey + nData; + pKI = pOp->p4.pKeyInfo; + memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */ + sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO); + pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat, 1); + addrJmp = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v); + pSort->labelBkOut = sqlite3VdbeMakeLabel(v); + pSort->regReturn = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor); + sqlite3VdbeJumpHere(v, addrFirst); + sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat); + sqlite3VdbeJumpHere(v, addrJmp); + } + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + op = OP_SorterInsert; + }else{ + op = OP_IdxInsert; + } + sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord); + if( pSelect->iLimit ){ + int addr1, addr2; + int iLimit; + if( pSelect->iOffset ){ + iLimit = pSelect->iOffset+1; + }else{ + iLimit = pSelect->iLimit; + } + addr1 = sqlite3VdbeAddOp1(v, OP_IfZero, iLimit); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, iLimit, -1); + addr2 = sqlite3VdbeAddOp0(v, OP_Goto); + sqlite3VdbeJumpHere(v, addr1); + sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor); + sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor); + sqlite3VdbeJumpHere(v, addr2); } - sqlite3DbFree(db, db->aExtension); } /* -** Enable or disable extension loading. Extension loading is disabled by -** default so as not to open security holes in older applications. +** Add code to implement the OFFSET */ -SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff){ - sqlite3_mutex_enter(db->mutex); - if( onoff ){ - db->flags |= SQLITE_LoadExtension; - }else{ - db->flags &= ~SQLITE_LoadExtension; +static void codeOffset( + Vdbe *v, /* Generate code into this VM */ + int iOffset, /* Register holding the offset counter */ + int iContinue /* Jump here to skip the current record */ +){ + if( iOffset>0 ){ + int addr; + addr = sqlite3VdbeAddOp3(v, OP_IfNeg, iOffset, 0, -1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, iContinue); + VdbeComment((v, "skip OFFSET records")); + sqlite3VdbeJumpHere(v, addr); } - sqlite3_mutex_leave(db->mutex); - return SQLITE_OK; } -#endif /* SQLITE_OMIT_LOAD_EXTENSION */ +/* +** Add code that will check to make sure the N registers starting at iMem +** form a distinct entry. iTab is a sorting index that holds previously +** seen combinations of the N values. A new entry is made in iTab +** if the current N values are new. +** +** A jump to addrRepeat is made and the N+1 values are popped from the +** stack if the top N elements are not distinct. +*/ +static void codeDistinct( + Parse *pParse, /* Parsing and code generating context */ + int iTab, /* A sorting index used to test for distinctness */ + int addrRepeat, /* Jump to here if not distinct */ + int N, /* Number of elements */ + int iMem /* First element */ +){ + Vdbe *v; + int r1; + + v = pParse->pVdbe; + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iTab, r1); + sqlite3ReleaseTempReg(pParse, r1); +} +#ifndef SQLITE_OMIT_SUBQUERY /* -** The auto-extension code added regardless of whether or not extension -** loading is supported. We need a dummy sqlite3Apis pointer for that -** code if regular extension loading is not available. This is that -** dummy pointer. +** Generate an error message when a SELECT is used within a subexpression +** (example: "a IN (SELECT * FROM table)") but it has more than 1 result +** column. We do this in a subroutine because the error used to occur +** in multiple places. (The error only occurs in one place now, but we +** retain the subroutine to minimize code disruption.) */ -#ifdef SQLITE_OMIT_LOAD_EXTENSION -static const sqlite3_api_routines sqlite3Apis = { 0 }; +static int checkForMultiColumnSelectError( + Parse *pParse, /* Parse context. */ + SelectDest *pDest, /* Destination of SELECT results */ + int nExpr /* Number of result columns returned by SELECT */ +){ + int eDest = pDest->eDest; + if( nExpr>1 && (eDest==SRT_Mem || eDest==SRT_Set) ){ + sqlite3ErrorMsg(pParse, "only a single result allowed for " + "a SELECT that is part of an expression"); + return 1; + }else{ + return 0; + } +} #endif - /* -** The following object holds the list of automatically loaded -** extensions. +** This routine generates the code for the inside of the inner loop +** of a SELECT. ** -** This list is shared across threads. The SQLITE_MUTEX_STATIC_MASTER -** mutex must be held while accessing this list. +** If srcTab is negative, then the pEList expressions +** are evaluated in order to get the data for this row. If srcTab is +** zero or more, then data is pulled from srcTab and pEList is used only +** to get number columns and the datatype for each column. */ -typedef struct sqlite3AutoExtList sqlite3AutoExtList; -static SQLITE_WSD struct sqlite3AutoExtList { - int nExt; /* Number of entries in aExt[] */ - void (**aExt)(void); /* Pointers to the extension init functions */ -} sqlite3Autoext = { 0, 0 }; +static void selectInnerLoop( + Parse *pParse, /* The parser context */ + Select *p, /* The complete select statement being coded */ + ExprList *pEList, /* List of values being extracted */ + int srcTab, /* Pull data from this table */ + SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */ + DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */ + SelectDest *pDest, /* How to dispose of the results */ + int iContinue, /* Jump here to continue with next row */ + int iBreak /* Jump here to break out of the inner loop */ +){ + Vdbe *v = pParse->pVdbe; + int i; + int hasDistinct; /* True if the DISTINCT keyword is present */ + int regResult; /* Start of memory holding result set */ + int eDest = pDest->eDest; /* How to dispose of results */ + int iParm = pDest->iSDParm; /* First argument to disposal method */ + int nResultCol; /* Number of result columns */ + int nPrefixReg = 0; /* Number of extra registers before regResult */ -/* The "wsdAutoext" macro will resolve to the autoextension -** state vector. If writable static data is unsupported on the target, -** we have to locate the state vector at run-time. In the more common -** case where writable static data is supported, wsdStat can refer directly -** to the "sqlite3Autoext" state vector declared above. -*/ -#ifdef SQLITE_OMIT_WSD -# define wsdAutoextInit \ - sqlite3AutoExtList *x = &GLOBAL(sqlite3AutoExtList,sqlite3Autoext) -# define wsdAutoext x[0] -#else -# define wsdAutoextInit -# define wsdAutoext sqlite3Autoext -#endif + assert( v ); + assert( pEList!=0 ); + hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; + if( pSort && pSort->pOrderBy==0 ) pSort = 0; + if( pSort==0 && !hasDistinct ){ + assert( iContinue!=0 ); + codeOffset(v, p->iOffset, iContinue); + } + /* Pull the requested columns. + */ + nResultCol = pEList->nExpr; -/* -** Register a statically linked extension that is automatically -** loaded by every new database connection. -*/ -SQLITE_API int sqlite3_auto_extension(void (*xInit)(void)){ - int rc = SQLITE_OK; -#ifndef SQLITE_OMIT_AUTOINIT - rc = sqlite3_initialize(); - if( rc ){ - return rc; - }else -#endif - { - int i; -#if SQLITE_THREADSAFE - sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); -#endif - wsdAutoextInit; - sqlite3_mutex_enter(mutex); - for(i=0; iiSdst==0 ){ + if( pSort ){ + nPrefixReg = pSort->pOrderBy->nExpr; + if( !(pSort->sortFlags & SORTFLAG_UseSorter) ) nPrefixReg++; + pParse->nMem += nPrefixReg; } - if( i==wsdAutoext.nExt ){ - int nByte = (wsdAutoext.nExt+1)*sizeof(wsdAutoext.aExt[0]); - void (**aNew)(void); - aNew = sqlite3_realloc(wsdAutoext.aExt, nByte); - if( aNew==0 ){ - rc = SQLITE_NOMEM; + pDest->iSdst = pParse->nMem+1; + pParse->nMem += nResultCol; + }else if( pDest->iSdst+nResultCol > pParse->nMem ){ + /* This is an error condition that can result, for example, when a SELECT + ** on the right-hand side of an INSERT contains more result columns than + ** there are columns in the table on the left. The error will be caught + ** and reported later. But we need to make sure enough memory is allocated + ** to avoid other spurious errors in the meantime. */ + pParse->nMem += nResultCol; + } + pDest->nSdst = nResultCol; + regResult = pDest->iSdst; + if( srcTab>=0 ){ + for(i=0; ia[i].zName)); + } + }else if( eDest!=SRT_Exists ){ + /* If the destination is an EXISTS(...) expression, the actual + ** values returned by the SELECT are not required. + */ + sqlite3ExprCodeExprList(pParse, pEList, regResult, + (eDest==SRT_Output||eDest==SRT_Coroutine)?SQLITE_ECEL_DUP:0); + } + + /* If the DISTINCT keyword was present on the SELECT statement + ** and this row has been seen before, then do not make this row + ** part of the result. + */ + if( hasDistinct ){ + switch( pDistinct->eTnctType ){ + case WHERE_DISTINCT_ORDERED: { + VdbeOp *pOp; /* No longer required OpenEphemeral instr. */ + int iJump; /* Jump destination */ + int regPrev; /* Previous row content */ + + /* Allocate space for the previous row */ + regPrev = pParse->nMem+1; + pParse->nMem += nResultCol; + + /* Change the OP_OpenEphemeral coded earlier to an OP_Null + ** sets the MEM_Cleared bit on the first register of the + ** previous value. This will cause the OP_Ne below to always + ** fail on the first iteration of the loop even if the first + ** row is all NULLs. + */ + sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct); + pOp = sqlite3VdbeGetOp(v, pDistinct->addrTnct); + pOp->opcode = OP_Null; + pOp->p1 = 1; + pOp->p2 = regPrev; + + iJump = sqlite3VdbeCurrentAddr(v) + nResultCol; + for(i=0; ia[i].pExpr); + if( idb->mallocFailed ); + sqlite3VdbeAddOp3(v, OP_Copy, regResult, regPrev, nResultCol-1); + break; + } + + case WHERE_DISTINCT_UNIQUE: { + sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct); + break; + } + + default: { + assert( pDistinct->eTnctType==WHERE_DISTINCT_UNORDERED ); + codeDistinct(pParse, pDistinct->tabTnct, iContinue, nResultCol, regResult); + break; + } + } + if( pSort==0 ){ + codeOffset(v, p->iOffset, iContinue); + } + } + + switch( eDest ){ + /* In this mode, write each query result to the key of the temporary + ** table iParm. + */ +#ifndef SQLITE_OMIT_COMPOUND_SELECT + case SRT_Union: { + int r1; + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + sqlite3ReleaseTempReg(pParse, r1); + break; + } + + /* Construct a record from the query result, but instead of + ** saving that record, use it as a key to delete elements from + ** the temporary table iParm. + */ + case SRT_Except: { + sqlite3VdbeAddOp3(v, OP_IdxDelete, iParm, regResult, nResultCol); + break; + } +#endif /* SQLITE_OMIT_COMPOUND_SELECT */ + + /* Store the result as data using a unique key. + */ + case SRT_Fifo: + case SRT_DistFifo: + case SRT_Table: + case SRT_EphemTab: { + int r1 = sqlite3GetTempRange(pParse, nPrefixReg+1); + testcase( eDest==SRT_Table ); + testcase( eDest==SRT_EphemTab ); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1+nPrefixReg); +#ifndef SQLITE_OMIT_CTE + if( eDest==SRT_DistFifo ){ + /* If the destination is DistFifo, then cursor (iParm+1) is open + ** on an ephemeral index. If the current row is already present + ** in the index, do not write it to the output. If not, add the + ** current row to the index and proceed with writing it to the + ** output table as well. */ + int addr = sqlite3VdbeCurrentAddr(v) + 4; + sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1); + assert( pSort==0 ); + } +#endif + if( pSort ){ + pushOntoSorter(pParse, pSort, p, r1+nPrefixReg, 1, nPrefixReg); }else{ - wsdAutoext.aExt = aNew; - wsdAutoext.aExt[wsdAutoext.nExt] = xInit; - wsdAutoext.nExt++; + int r2 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2); + sqlite3VdbeAddOp3(v, OP_Insert, iParm, r1, r2); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3ReleaseTempReg(pParse, r2); } + sqlite3ReleaseTempRange(pParse, r1, nPrefixReg+1); + break; } - sqlite3_mutex_leave(mutex); - assert( (rc&0xff)==rc ); - return rc; + +#ifndef SQLITE_OMIT_SUBQUERY + /* If we are creating a set for an "expr IN (SELECT ...)" construct, + ** then there should be a single item on the stack. Write this + ** item into the set table with bogus data. + */ + case SRT_Set: { + assert( nResultCol==1 ); + pDest->affSdst = + sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affSdst); + if( pSort ){ + /* At first glance you would think we could optimize out the + ** ORDER BY in this case since the order of entries in the set + ** does not matter. But there might be a LIMIT clause, in which + ** case the order does matter */ + pushOntoSorter(pParse, pSort, p, regResult, 1, nPrefixReg); + }else{ + int r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult,1,r1, &pDest->affSdst, 1); + sqlite3ExprCacheAffinityChange(pParse, regResult, 1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + sqlite3ReleaseTempReg(pParse, r1); + } + break; + } + + /* If any row exist in the result set, record that fact and abort. + */ + case SRT_Exists: { + sqlite3VdbeAddOp2(v, OP_Integer, 1, iParm); + /* The LIMIT clause will terminate the loop for us */ + break; + } + + /* If this is a scalar select that is part of an expression, then + ** store the results in the appropriate memory cell and break out + ** of the scan loop. + */ + case SRT_Mem: { + assert( nResultCol==1 ); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, regResult, 1, nPrefixReg); + }else{ + assert( regResult==iParm ); + /* The LIMIT clause will jump out of the loop for us */ + } + break; + } +#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ + + case SRT_Coroutine: /* Send data to a co-routine */ + case SRT_Output: { /* Return the results */ + testcase( eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, regResult, nResultCol, nPrefixReg); + }else if( eDest==SRT_Coroutine ){ + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + }else{ + sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, nResultCol); + sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol); + } + break; + } + +#ifndef SQLITE_OMIT_CTE + /* Write the results into a priority queue that is order according to + ** pDest->pOrderBy (in pSO). pDest->iSDParm (in iParm) is the cursor for an + ** index with pSO->nExpr+2 columns. Build a key using pSO for the first + ** pSO->nExpr columns, then make sure all keys are unique by adding a + ** final OP_Sequence column. The last column is the record as a blob. + */ + case SRT_DistQueue: + case SRT_Queue: { + int nKey; + int r1, r2, r3; + int addrTest = 0; + ExprList *pSO; + pSO = pDest->pOrderBy; + assert( pSO ); + nKey = pSO->nExpr; + r1 = sqlite3GetTempReg(pParse); + r2 = sqlite3GetTempRange(pParse, nKey+2); + r3 = r2+nKey+1; + if( eDest==SRT_DistQueue ){ + /* If the destination is DistQueue, then cursor (iParm+1) is open + ** on a second ephemeral index that holds all values every previously + ** added to the queue. */ + addrTest = sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, 0, + regResult, nResultCol); + VdbeCoverage(v); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r3); + if( eDest==SRT_DistQueue ){ + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r3); + sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + } + for(i=0; ia[i].u.x.iOrderByCol - 1, + r2+i); + } + sqlite3VdbeAddOp2(v, OP_Sequence, iParm, r2+nKey); + sqlite3VdbeAddOp3(v, OP_MakeRecord, r2, nKey+2, r1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + if( addrTest ) sqlite3VdbeJumpHere(v, addrTest); + sqlite3ReleaseTempReg(pParse, r1); + sqlite3ReleaseTempRange(pParse, r2, nKey+2); + break; + } +#endif /* SQLITE_OMIT_CTE */ + + + +#if !defined(SQLITE_OMIT_TRIGGER) + /* Discard the results. This is used for SELECT statements inside + ** the body of a TRIGGER. The purpose of such selects is to call + ** user-defined functions that have side effects. We do not care + ** about the actual results of the select. + */ + default: { + assert( eDest==SRT_Discard ); + break; + } +#endif + } + + /* Jump to the end of the loop if the LIMIT is reached. Except, if + ** there is a sorter, in which case the sorter has already limited + ** the output for us. + */ + if( pSort==0 && p->iLimit ){ + sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); VdbeCoverage(v); } } /* -** Reset the automatic extension loading mechanism. +** Allocate a KeyInfo object sufficient for an index of N key columns and +** X extra columns. */ -SQLITE_API void sqlite3_reset_auto_extension(void){ -#ifndef SQLITE_OMIT_AUTOINIT - if( sqlite3_initialize()==SQLITE_OK ) -#endif - { -#if SQLITE_THREADSAFE - sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); -#endif - wsdAutoextInit; - sqlite3_mutex_enter(mutex); - sqlite3_free(wsdAutoext.aExt); - wsdAutoext.aExt = 0; - wsdAutoext.nExt = 0; - sqlite3_mutex_leave(mutex); +SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){ + KeyInfo *p = sqlite3DbMallocZero(0, + sizeof(KeyInfo) + (N+X)*(sizeof(CollSeq*)+1)); + if( p ){ + p->aSortOrder = (u8*)&p->aColl[N+X]; + p->nField = (u16)N; + p->nXField = (u16)X; + p->enc = ENC(db); + p->db = db; + p->nRef = 1; + }else{ + db->mallocFailed = 1; } + return p; } /* -** Load all automatic extensions. -** -** If anything goes wrong, set an error in the database connection. +** Deallocate a KeyInfo object */ -SQLITE_PRIVATE void sqlite3AutoLoadExtensions(sqlite3 *db){ - int i; - int go = 1; - int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*); - - wsdAutoextInit; - if( wsdAutoext.nExt==0 ){ - /* Common case: early out without every having to acquire a mutex */ - return; +SQLITE_PRIVATE void sqlite3KeyInfoUnref(KeyInfo *p){ + if( p ){ + assert( p->nRef>0 ); + p->nRef--; + if( p->nRef==0 ) sqlite3DbFree(0, p); } - for(i=0; go; i++){ - char *zErrmsg; -#if SQLITE_THREADSAFE - sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); -#endif - sqlite3_mutex_enter(mutex); - if( i>=wsdAutoext.nExt ){ - xInit = 0; - go = 0; - }else{ - xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*)) - wsdAutoext.aExt[i]; - } - sqlite3_mutex_leave(mutex); - zErrmsg = 0; - if( xInit && xInit(db, &zErrmsg, &sqlite3Apis) ){ - sqlite3Error(db, SQLITE_ERROR, - "automatic extension loading failed: %s", zErrmsg); - go = 0; - } - sqlite3_free(zErrmsg); +} + +/* +** Make a new pointer to a KeyInfo object +*/ +SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoRef(KeyInfo *p){ + if( p ){ + assert( p->nRef>0 ); + p->nRef++; } + return p; } -/************** End of loadext.c *********************************************/ -/************** Begin file pragma.c ******************************************/ +#ifdef SQLITE_DEBUG /* -** 2003 April 6 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Return TRUE if a KeyInfo object can be change. The KeyInfo object +** can only be changed if this is just a single reference to the object. ** -************************************************************************* -** This file contains code used to implement the PRAGMA command. +** This routine is used only inside of assert() statements. */ +SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo *p){ return p->nRef==1; } +#endif /* SQLITE_DEBUG */ /* -** Interpret the given string as a safety level. Return 0 for OFF, -** 1 for ON or NORMAL and 2 for FULL. Return 1 for an empty or -** unrecognized string argument. +** Given an expression list, generate a KeyInfo structure that records +** the collating sequence for each expression in that expression list. ** -** Note that the values returned are one less that the values that -** should be passed into sqlite3BtreeSetSafetyLevel(). The is done -** to support legacy SQL code. The safety level used to be boolean -** and older scripts may have used numbers 0 for OFF and 1 for ON. +** If the ExprList is an ORDER BY or GROUP BY clause then the resulting +** KeyInfo structure is appropriate for initializing a virtual index to +** implement that clause. If the ExprList is the result set of a SELECT +** then the KeyInfo structure is appropriate for initializing a virtual +** index to implement a DISTINCT test. +** +** Space to hold the KeyInfo structure is obtained from malloc. The calling +** function is responsible for seeing that this structure is eventually +** freed. */ -static u8 getSafetyLevel(const char *z){ - /* 123456789 123456789 */ - static const char zText[] = "onoffalseyestruefull"; - static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16}; - static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 4}; - static const u8 iValue[] = {1, 0, 0, 0, 1, 1, 2}; - int i, n; - if( sqlite3Isdigit(*z) ){ - return (u8)sqlite3Atoi(z); - } - n = sqlite3Strlen30(z); - for(i=0; idb; + int i; + + nExpr = pList->nExpr; + pInfo = sqlite3KeyInfoAlloc(db, nExpr+nExtra-iStart, 1); + if( pInfo ){ + assert( sqlite3KeyInfoIsWriteable(pInfo) ); + for(i=iStart, pItem=pList->a+iStart; ipExpr); + if( !pColl ) pColl = db->pDfltColl; + pInfo->aColl[i-iStart] = pColl; + pInfo->aSortOrder[i-iStart] = pItem->sortOrder; } } - return 1; + return pInfo; } +#ifndef SQLITE_OMIT_COMPOUND_SELECT /* -** Interpret the given string as a boolean value. +** Name of the connection operator, used for error messages. */ -SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z){ - return getSafetyLevel(z)&1; +static const char *selectOpName(int id){ + char *z; + switch( id ){ + case TK_ALL: z = "UNION ALL"; break; + case TK_INTERSECT: z = "INTERSECT"; break; + case TK_EXCEPT: z = "EXCEPT"; break; + default: z = "UNION"; break; + } + return z; } +#endif /* SQLITE_OMIT_COMPOUND_SELECT */ -/* The sqlite3GetBoolean() function is used by other modules but the -** remainder of this file is specific to PRAGMA processing. So omit -** the rest of the file if PRAGMAs are omitted from the build. -*/ -#if !defined(SQLITE_OMIT_PRAGMA) - +#ifndef SQLITE_OMIT_EXPLAIN /* -** Interpret the given string as a locking mode value. +** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function +** is a no-op. Otherwise, it adds a single row of output to the EQP result, +** where the caption is of the form: +** +** "USE TEMP B-TREE FOR xxx" +** +** where xxx is one of "DISTINCT", "ORDER BY" or "GROUP BY". Exactly which +** is determined by the zUsage argument. */ -static int getLockingMode(const char *z){ - if( z ){ - if( 0==sqlite3StrICmp(z, "exclusive") ) return PAGER_LOCKINGMODE_EXCLUSIVE; - if( 0==sqlite3StrICmp(z, "normal") ) return PAGER_LOCKINGMODE_NORMAL; +static void explainTempTable(Parse *pParse, const char *zUsage){ + if( pParse->explain==2 ){ + Vdbe *v = pParse->pVdbe; + char *zMsg = sqlite3MPrintf(pParse->db, "USE TEMP B-TREE FOR %s", zUsage); + sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); } - return PAGER_LOCKINGMODE_QUERY; } -#ifndef SQLITE_OMIT_AUTOVACUUM /* -** Interpret the given string as an auto-vacuum mode value. -** -** The following strings, "none", "full" and "incremental" are -** acceptable, as are their numeric equivalents: 0, 1 and 2 respectively. +** Assign expression b to lvalue a. A second, no-op, version of this macro +** is provided when SQLITE_OMIT_EXPLAIN is defined. This allows the code +** in sqlite3Select() to assign values to structure member variables that +** only exist if SQLITE_OMIT_EXPLAIN is not defined without polluting the +** code with #ifndef directives. */ -static int getAutoVacuum(const char *z){ - int i; - if( 0==sqlite3StrICmp(z, "none") ) return BTREE_AUTOVACUUM_NONE; - if( 0==sqlite3StrICmp(z, "full") ) return BTREE_AUTOVACUUM_FULL; - if( 0==sqlite3StrICmp(z, "incremental") ) return BTREE_AUTOVACUUM_INCR; - i = sqlite3Atoi(z); - return (u8)((i>=0&&i<=2)?i:0); -} -#endif /* ifndef SQLITE_OMIT_AUTOVACUUM */ +# define explainSetInteger(a, b) a = b -#ifndef SQLITE_OMIT_PAGER_PRAGMAS +#else +/* No-op versions of the explainXXX() functions and macros. */ +# define explainTempTable(y,z) +# define explainSetInteger(y,z) +#endif + +#if !defined(SQLITE_OMIT_EXPLAIN) && !defined(SQLITE_OMIT_COMPOUND_SELECT) /* -** Interpret the given string as a temp db location. Return 1 for file -** backed temporary databases, 2 for the Red-Black tree in memory database -** and 0 to use the compile-time default. +** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function +** is a no-op. Otherwise, it adds a single row of output to the EQP result, +** where the caption is of one of the two forms: +** +** "COMPOSITE SUBQUERIES iSub1 and iSub2 (op)" +** "COMPOSITE SUBQUERIES iSub1 and iSub2 USING TEMP B-TREE (op)" +** +** where iSub1 and iSub2 are the integers passed as the corresponding +** function parameters, and op is the text representation of the parameter +** of the same name. The parameter "op" must be one of TK_UNION, TK_EXCEPT, +** TK_INTERSECT or TK_ALL. The first form is used if argument bUseTmp is +** false, or the second form if it is true. */ -static int getTempStore(const char *z){ - if( z[0]>='0' && z[0]<='2' ){ - return z[0] - '0'; - }else if( sqlite3StrICmp(z, "file")==0 ){ - return 1; - }else if( sqlite3StrICmp(z, "memory")==0 ){ - return 2; - }else{ - return 0; +static void explainComposite( + Parse *pParse, /* Parse context */ + int op, /* One of TK_UNION, TK_EXCEPT etc. */ + int iSub1, /* Subquery id 1 */ + int iSub2, /* Subquery id 2 */ + int bUseTmp /* True if a temp table was used */ +){ + assert( op==TK_UNION || op==TK_EXCEPT || op==TK_INTERSECT || op==TK_ALL ); + if( pParse->explain==2 ){ + Vdbe *v = pParse->pVdbe; + char *zMsg = sqlite3MPrintf( + pParse->db, "COMPOUND SUBQUERIES %d AND %d %s(%s)", iSub1, iSub2, + bUseTmp?"USING TEMP B-TREE ":"", selectOpName(op) + ); + sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); } } -#endif /* SQLITE_PAGER_PRAGMAS */ +#else +/* No-op versions of the explainXXX() functions and macros. */ +# define explainComposite(v,w,x,y,z) +#endif -#ifndef SQLITE_OMIT_PAGER_PRAGMAS /* -** Invalidate temp storage, either when the temp storage is changed -** from default, or when 'file' and the temp_store_directory has changed +** If the inner loop was generated using a non-null pOrderBy argument, +** then the results were placed in a sorter. After the loop is terminated +** we need to run the sorter and output the results. The following +** routine generates the code needed to do that. */ -static int invalidateTempStorage(Parse *pParse){ - sqlite3 *db = pParse->db; - if( db->aDb[1].pBt!=0 ){ - if( !db->autoCommit || sqlite3BtreeIsInReadTrans(db->aDb[1].pBt) ){ - sqlite3ErrorMsg(pParse, "temporary storage cannot be changed " - "from within a transaction"); - return SQLITE_ERROR; +static void generateSortTail( + Parse *pParse, /* Parsing context */ + Select *p, /* The SELECT statement */ + SortCtx *pSort, /* Information on the ORDER BY clause */ + int nColumn, /* Number of columns of data */ + SelectDest *pDest /* Write the sorted results here */ +){ + Vdbe *v = pParse->pVdbe; /* The prepared statement */ + int addrBreak = sqlite3VdbeMakeLabel(v); /* Jump here to exit loop */ + int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */ + int addr; + int addrOnce = 0; + int iTab; + ExprList *pOrderBy = pSort->pOrderBy; + int eDest = pDest->eDest; + int iParm = pDest->iSDParm; + int regRow; + int regRowid; + int nKey; + int iSortTab; /* Sorter cursor to read from */ + int nSortData; /* Trailing values to read from sorter */ + int i; + int bSeq; /* True if sorter record includes seq. no. */ +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS + struct ExprList_item *aOutEx = p->pEList->a; +#endif + + if( pSort->labelBkOut ){ + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrBreak); + sqlite3VdbeResolveLabel(v, pSort->labelBkOut); + } + iTab = pSort->iECursor; + if( eDest==SRT_Output || eDest==SRT_Coroutine ){ + regRowid = 0; + regRow = pDest->iSdst; + nSortData = nColumn; + }else{ + regRowid = sqlite3GetTempReg(pParse); + regRow = sqlite3GetTempReg(pParse); + nSortData = 1; + } + nKey = pOrderBy->nExpr - pSort->nOBSat; + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + int regSortOut = ++pParse->nMem; + iSortTab = pParse->nTab++; + if( pSort->labelBkOut ){ + addrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v); + } + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData); + if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); + addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak); + VdbeCoverage(v); + codeOffset(v, p->iOffset, addrContinue); + sqlite3VdbeAddOp3(v, OP_SorterData, iTab, regSortOut, iSortTab); + bSeq = 0; + }else{ + addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); VdbeCoverage(v); + codeOffset(v, p->iOffset, addrContinue); + iSortTab = iTab; + bSeq = 1; + } + for(i=0; iaffSdst, 1); + sqlite3ExprCacheAffinityChange(pParse, regRow, 1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid); + break; + } + case SRT_Mem: { + assert( nColumn==1 ); + sqlite3ExprCodeMove(pParse, regRow, iParm, 1); + /* The LIMIT clause will terminate the loop for us */ + break; + } +#endif + default: { + assert( eDest==SRT_Output || eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); + testcase( eDest==SRT_Coroutine ); + if( eDest==SRT_Output ){ + sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iSdst, nColumn); + sqlite3ExprCacheAffinityChange(pParse, pDest->iSdst, nColumn); + }else{ + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + } + break; } - sqlite3BtreeClose(db->aDb[1].pBt); - db->aDb[1].pBt = 0; - sqlite3ResetInternalSchema(db, -1); } - return SQLITE_OK; -} -#endif /* SQLITE_PAGER_PRAGMAS */ - -#ifndef SQLITE_OMIT_PAGER_PRAGMAS -/* -** If the TEMP database is open, close it and mark the database schema -** as needing reloading. This must be done when using the SQLITE_TEMP_STORE -** or DEFAULT_TEMP_STORE pragmas. -*/ -static int changeTempStorage(Parse *pParse, const char *zStorageType){ - int ts = getTempStore(zStorageType); - sqlite3 *db = pParse->db; - if( db->temp_store==ts ) return SQLITE_OK; - if( invalidateTempStorage( pParse ) != SQLITE_OK ){ - return SQLITE_ERROR; + if( regRowid ){ + sqlite3ReleaseTempReg(pParse, regRow); + sqlite3ReleaseTempReg(pParse, regRowid); } - db->temp_store = (u8)ts; - return SQLITE_OK; -} -#endif /* SQLITE_PAGER_PRAGMAS */ - -/* -** Generate code to return a single integer value. -*/ -static void returnSingleInt(Parse *pParse, const char *zLabel, i64 value){ - Vdbe *v = sqlite3GetVdbe(pParse); - int mem = ++pParse->nMem; - i64 *pI64 = sqlite3DbMallocRaw(pParse->db, sizeof(value)); - if( pI64 ){ - memcpy(pI64, &value, sizeof(value)); + /* The bottom of the loop + */ + sqlite3VdbeResolveLabel(v, addrContinue); + if( pSort->sortFlags & SORTFLAG_UseSorter ){ + sqlite3VdbeAddOp2(v, OP_SorterNext, iTab, addr); VdbeCoverage(v); + }else{ + sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); VdbeCoverage(v); } - sqlite3VdbeAddOp4(v, OP_Int64, 0, mem, 0, (char*)pI64, P4_INT64); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLabel, SQLITE_STATIC); - sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1); + if( pSort->regReturn ) sqlite3VdbeAddOp1(v, OP_Return, pSort->regReturn); + sqlite3VdbeResolveLabel(v, addrBreak); } -#ifndef SQLITE_OMIT_FLAG_PRAGMAS /* -** Check to see if zRight and zLeft refer to a pragma that queries -** or changes one of the flags in db->flags. Return 1 if so and 0 if not. -** Also, implement the pragma. -*/ -static int flagPragma(Parse *pParse, const char *zLeft, const char *zRight){ - static const struct sPragmaType { - const char *zName; /* Name of the pragma */ - int mask; /* Mask for the db->flags value */ - } aPragma[] = { - { "full_column_names", SQLITE_FullColNames }, - { "short_column_names", SQLITE_ShortColNames }, - { "count_changes", SQLITE_CountRows }, - { "empty_result_callbacks", SQLITE_NullCallback }, - { "legacy_file_format", SQLITE_LegacyFileFmt }, - { "fullfsync", SQLITE_FullFSync }, - { "checkpoint_fullfsync", SQLITE_CkptFullFSync }, - { "reverse_unordered_selects", SQLITE_ReverseOrder }, -#ifndef SQLITE_OMIT_AUTOMATIC_INDEX - { "automatic_index", SQLITE_AutoIndex }, -#endif -#ifdef SQLITE_DEBUG - { "sql_trace", SQLITE_SqlTrace }, - { "vdbe_listing", SQLITE_VdbeListing }, - { "vdbe_trace", SQLITE_VdbeTrace }, -#endif -#ifndef SQLITE_OMIT_CHECK - { "ignore_check_constraints", SQLITE_IgnoreChecks }, -#endif - /* The following is VERY experimental */ - { "writable_schema", SQLITE_WriteSchema|SQLITE_RecoveryMode }, - { "omit_readlock", SQLITE_NoReadlock }, - - /* TODO: Maybe it shouldn't be possible to change the ReadUncommitted - ** flag if there are any active statements. */ - { "read_uncommitted", SQLITE_ReadUncommitted }, - { "recursive_triggers", SQLITE_RecTriggers }, +** Return a pointer to a string containing the 'declaration type' of the +** expression pExpr. The string may be treated as static by the caller. +** +** Also try to estimate the size of the returned value and return that +** result in *pEstWidth. +** +** The declaration type is the exact datatype definition extracted from the +** original CREATE TABLE statement if the expression is a column. The +** declaration type for a ROWID field is INTEGER. Exactly when an expression +** is considered a column can be complex in the presence of subqueries. The +** result-set expression in all of the following SELECT statements is +** considered a column by this function. +** +** SELECT col FROM tbl; +** SELECT (SELECT col FROM tbl; +** SELECT (SELECT col FROM tbl); +** SELECT abc FROM (SELECT col AS abc FROM tbl); +** +** The declaration type for any expression other than a column is NULL. +** +** This routine has either 3 or 6 parameters depending on whether or not +** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used. +*/ +#ifdef SQLITE_ENABLE_COLUMN_METADATA +# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,C,D,E,F) +static const char *columnTypeImpl( + NameContext *pNC, + Expr *pExpr, + const char **pzOrigDb, + const char **pzOrigTab, + const char **pzOrigCol, + u8 *pEstWidth +){ + char const *zOrigDb = 0; + char const *zOrigTab = 0; + char const *zOrigCol = 0; +#else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */ +# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,F) +static const char *columnTypeImpl( + NameContext *pNC, + Expr *pExpr, + u8 *pEstWidth +){ +#endif /* !defined(SQLITE_ENABLE_COLUMN_METADATA) */ + char const *zType = 0; + int j; + u8 estWidth = 1; - /* This flag may only be set if both foreign-key and trigger support - ** are present in the build. */ -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - { "foreign_keys", SQLITE_ForeignKeys }, -#endif - }; - int i; - const struct sPragmaType *p; - for(i=0, p=aPragma; izName)==0 ){ - sqlite3 *db = pParse->db; - Vdbe *v; - v = sqlite3GetVdbe(pParse); - assert( v!=0 ); /* Already allocated by sqlite3Pragma() */ - if( ALWAYS(v) ){ - if( zRight==0 ){ - returnSingleInt(pParse, p->zName, (db->flags & p->mask)!=0 ); + if( NEVER(pExpr==0) || pNC->pSrcList==0 ) return 0; + switch( pExpr->op ){ + case TK_AGG_COLUMN: + case TK_COLUMN: { + /* The expression is a column. Locate the table the column is being + ** extracted from in NameContext.pSrcList. This table may be real + ** database table or a subquery. + */ + Table *pTab = 0; /* Table structure column is extracted from */ + Select *pS = 0; /* Select the column is extracted from */ + int iCol = pExpr->iColumn; /* Index of column in pTab */ + testcase( pExpr->op==TK_AGG_COLUMN ); + testcase( pExpr->op==TK_COLUMN ); + while( pNC && !pTab ){ + SrcList *pTabList = pNC->pSrcList; + for(j=0;jnSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++); + if( jnSrc ){ + pTab = pTabList->a[j].pTab; + pS = pTabList->a[j].pSelect; }else{ - int mask = p->mask; /* Mask of bits to set or clear. */ - if( db->autoCommit==0 ){ - /* Foreign key support may not be enabled or disabled while not - ** in auto-commit mode. */ - mask &= ~(SQLITE_ForeignKeys); - } + pNC = pNC->pNext; + } + } - if( sqlite3GetBoolean(zRight) ){ - db->flags |= mask; - }else{ - db->flags &= ~mask; - } + if( pTab==0 ){ + /* At one time, code such as "SELECT new.x" within a trigger would + ** cause this condition to run. Since then, we have restructured how + ** trigger code is generated and so this condition is no longer + ** possible. However, it can still be true for statements like + ** the following: + ** + ** CREATE TABLE t1(col INTEGER); + ** SELECT (SELECT t1.col) FROM FROM t1; + ** + ** when columnType() is called on the expression "t1.col" in the + ** sub-select. In this case, set the column type to NULL, even + ** though it should really be "INTEGER". + ** + ** This is not a problem, as the column type of "t1.col" is never + ** used. When columnType() is called on the expression + ** "(SELECT t1.col)", the correct type is returned (see the TK_SELECT + ** branch below. */ + break; + } - /* Many of the flag-pragmas modify the code generated by the SQL - ** compiler (eg. count_changes). So add an opcode to expire all - ** compiled SQL statements after modifying a pragma value. + assert( pTab && pExpr->pTab==pTab ); + if( pS ){ + /* The "table" is actually a sub-select or a view in the FROM clause + ** of the SELECT statement. Return the declaration type and origin + ** data for the result-set column of the sub-select. + */ + if( iCol>=0 && ALWAYS(iColpEList->nExpr) ){ + /* If iCol is less than zero, then the expression requests the + ** rowid of the sub-select or view. This expression is legal (see + ** test case misc2.2.2) - it always evaluates to NULL. */ - sqlite3VdbeAddOp2(v, OP_Expire, 0, 0); + NameContext sNC; + Expr *p = pS->pEList->a[iCol].pExpr; + sNC.pSrcList = pS->pSrc; + sNC.pNext = pNC; + sNC.pParse = pNC->pParse; + zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth); + } + }else if( pTab->pSchema ){ + /* A real table */ + assert( !pS ); + if( iCol<0 ) iCol = pTab->iPKey; + assert( iCol==-1 || (iCol>=0 && iColnCol) ); +#ifdef SQLITE_ENABLE_COLUMN_METADATA + if( iCol<0 ){ + zType = "INTEGER"; + zOrigCol = "rowid"; + }else{ + zType = pTab->aCol[iCol].zType; + zOrigCol = pTab->aCol[iCol].zName; + estWidth = pTab->aCol[iCol].szEst; + } + zOrigTab = pTab->zName; + if( pNC->pParse ){ + int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema); + zOrigDb = pNC->pParse->db->aDb[iDb].zName; + } +#else + if( iCol<0 ){ + zType = "INTEGER"; + }else{ + zType = pTab->aCol[iCol].zType; + estWidth = pTab->aCol[iCol].szEst; } +#endif } + break; + } +#ifndef SQLITE_OMIT_SUBQUERY + case TK_SELECT: { + /* The expression is a sub-select. Return the declaration type and + ** origin info for the single column in the result set of the SELECT + ** statement. + */ + NameContext sNC; + Select *pS = pExpr->x.pSelect; + Expr *p = pS->pEList->a[0].pExpr; + assert( ExprHasProperty(pExpr, EP_xIsSelect) ); + sNC.pSrcList = pS->pSrc; + sNC.pNext = pNC; + sNC.pParse = pNC->pParse; + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, &estWidth); + break; + } +#endif + } + +#ifdef SQLITE_ENABLE_COLUMN_METADATA + if( pzOrigDb ){ + assert( pzOrigTab && pzOrigCol ); + *pzOrigDb = zOrigDb; + *pzOrigTab = zOrigTab; + *pzOrigCol = zOrigCol; + } +#endif + if( pEstWidth ) *pEstWidth = estWidth; + return zType; +} + +/* +** Generate code that will tell the VDBE the declaration types of columns +** in the result set. +*/ +static void generateColumnTypes( + Parse *pParse, /* Parser context */ + SrcList *pTabList, /* List of tables */ + ExprList *pEList /* Expressions defining the result set */ +){ +#ifndef SQLITE_OMIT_DECLTYPE + Vdbe *v = pParse->pVdbe; + int i; + NameContext sNC; + sNC.pSrcList = pTabList; + sNC.pParse = pParse; + for(i=0; inExpr; i++){ + Expr *p = pEList->a[i].pExpr; + const char *zType; +#ifdef SQLITE_ENABLE_COLUMN_METADATA + const char *zOrigDb = 0; + const char *zOrigTab = 0; + const char *zOrigCol = 0; + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, 0); - return 1; - } + /* The vdbe must make its own copy of the column-type and other + ** column specific strings, in case the schema is reset before this + ** virtual machine is deleted. + */ + sqlite3VdbeSetColName(v, i, COLNAME_DATABASE, zOrigDb, SQLITE_TRANSIENT); + sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT); + sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT); +#else + zType = columnType(&sNC, p, 0, 0, 0, 0); +#endif + sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT); } - return 0; +#endif /* !defined(SQLITE_OMIT_DECLTYPE) */ } -#endif /* SQLITE_OMIT_FLAG_PRAGMAS */ /* -** Return a human-readable name for a constraint resolution action. +** Generate code that will tell the VDBE the names of columns +** in the result set. This information is used to provide the +** azCol[] values in the callback. */ -#ifndef SQLITE_OMIT_FOREIGN_KEY -static const char *actionName(u8 action){ - const char *zName; - switch( action ){ - case OE_SetNull: zName = "SET NULL"; break; - case OE_SetDflt: zName = "SET DEFAULT"; break; - case OE_Cascade: zName = "CASCADE"; break; - case OE_Restrict: zName = "RESTRICT"; break; - default: zName = "NO ACTION"; - assert( action==OE_None ); break; - } - return zName; -} -#endif - +static void generateColumnNames( + Parse *pParse, /* Parser context */ + SrcList *pTabList, /* List of tables */ + ExprList *pEList /* Expressions defining the result set */ +){ + Vdbe *v = pParse->pVdbe; + int i, j; + sqlite3 *db = pParse->db; + int fullNames, shortNames; -/* -** Parameter eMode must be one of the PAGER_JOURNALMODE_XXX constants -** defined in pager.h. This function returns the associated lowercase -** journal-mode name. -*/ -SQLITE_PRIVATE const char *sqlite3JournalModename(int eMode){ - static char * const azModeName[] = { - "delete", "persist", "off", "truncate", "memory" -#ifndef SQLITE_OMIT_WAL - , "wal" +#ifndef SQLITE_OMIT_EXPLAIN + /* If this is an EXPLAIN, skip this step */ + if( pParse->explain ){ + return; + } #endif - }; - assert( PAGER_JOURNALMODE_DELETE==0 ); - assert( PAGER_JOURNALMODE_PERSIST==1 ); - assert( PAGER_JOURNALMODE_OFF==2 ); - assert( PAGER_JOURNALMODE_TRUNCATE==3 ); - assert( PAGER_JOURNALMODE_MEMORY==4 ); - assert( PAGER_JOURNALMODE_WAL==5 ); - assert( eMode>=0 && eMode<=ArraySize(azModeName) ); - if( eMode==ArraySize(azModeName) ) return 0; - return azModeName[eMode]; + if( pParse->colNamesSet || NEVER(v==0) || db->mallocFailed ) return; + pParse->colNamesSet = 1; + fullNames = (db->flags & SQLITE_FullColNames)!=0; + shortNames = (db->flags & SQLITE_ShortColNames)!=0; + sqlite3VdbeSetNumCols(v, pEList->nExpr); + for(i=0; inExpr; i++){ + Expr *p; + p = pEList->a[i].pExpr; + if( NEVER(p==0) ) continue; + if( pEList->a[i].zName ){ + char *zName = pEList->a[i].zName; + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT); + }else if( (p->op==TK_COLUMN || p->op==TK_AGG_COLUMN) && pTabList ){ + Table *pTab; + char *zCol; + int iCol = p->iColumn; + for(j=0; ALWAYS(jnSrc); j++){ + if( pTabList->a[j].iCursor==p->iTable ) break; + } + assert( jnSrc ); + pTab = pTabList->a[j].pTab; + if( iCol<0 ) iCol = pTab->iPKey; + assert( iCol==-1 || (iCol>=0 && iColnCol) ); + if( iCol<0 ){ + zCol = "rowid"; + }else{ + zCol = pTab->aCol[iCol].zName; + } + if( !shortNames && !fullNames ){ + sqlite3VdbeSetColName(v, i, COLNAME_NAME, + sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC); + }else if( fullNames ){ + char *zName = 0; + zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol); + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC); + }else{ + sqlite3VdbeSetColName(v, i, COLNAME_NAME, zCol, SQLITE_TRANSIENT); + } + }else{ + const char *z = pEList->a[i].zSpan; + z = z==0 ? sqlite3MPrintf(db, "column%d", i+1) : sqlite3DbStrDup(db, z); + sqlite3VdbeSetColName(v, i, COLNAME_NAME, z, SQLITE_DYNAMIC); + } + } + generateColumnTypes(pParse, pTabList, pEList); } /* -** Process a pragma statement. -** -** Pragmas are of this form: +** Given an expression list (which is really the list of expressions +** that form the result set of a SELECT statement) compute appropriate +** column names for a table that would hold the expression list. ** -** PRAGMA [database.]id [= value] +** All column names will be unique. ** -** The identifier might also be a string. The value is a string, and -** identifier, or a number. If minusFlag is true, then the value is -** a number that was preceded by a minus sign. +** Only the column names are computed. Column.zType, Column.zColl, +** and other fields of Column are zeroed. ** -** If the left side is "database.id" then pId1 is the database name -** and pId2 is the id. If the left side is just "id" then pId1 is the -** id and pId2 is any empty string. +** Return SQLITE_OK on success. If a memory allocation error occurs, +** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM. */ -SQLITE_PRIVATE void sqlite3Pragma( - Parse *pParse, - Token *pId1, /* First part of [database.]id field */ - Token *pId2, /* Second part of [database.]id field, or NULL */ - Token *pValue, /* Token for , or NULL */ - int minusFlag /* True if a '-' sign preceded */ +static int selectColumnsFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pEList, /* Expr list from which to derive column names */ + i16 *pnCol, /* Write the number of columns here */ + Column **paCol /* Write the new column list here */ ){ - char *zLeft = 0; /* Nul-terminated UTF-8 string */ - char *zRight = 0; /* Nul-terminated UTF-8 string , or NULL */ - const char *zDb = 0; /* The database name */ - Token *pId; /* Pointer to token */ - int iDb; /* Database index for */ - sqlite3 *db = pParse->db; - Db *pDb; - Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(db); - if( v==0 ) return; - sqlite3VdbeRunOnlyOnce(v); - pParse->nMem = 2; - - /* Interpret the [database.] part of the pragma statement. iDb is the - ** index of the database this pragma is being applied to in db.aDb[]. */ - iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId); - if( iDb<0 ) return; - pDb = &db->aDb[iDb]; - - /* If the temp database has been explicitly named as part of the - ** pragma, make sure it is open. - */ - if( iDb==1 && sqlite3OpenTempDatabase(pParse) ){ - return; - } + sqlite3 *db = pParse->db; /* Database connection */ + int i, j; /* Loop counters */ + int cnt; /* Index added to make the name unique */ + Column *aCol, *pCol; /* For looping over result columns */ + int nCol; /* Number of columns in the result set */ + Expr *p; /* Expression for a single result column */ + char *zName; /* Column name */ + int nName; /* Size of name in zName[] */ - zLeft = sqlite3NameFromToken(db, pId); - if( !zLeft ) return; - if( minusFlag ){ - zRight = sqlite3MPrintf(db, "-%T", pValue); + if( pEList ){ + nCol = pEList->nExpr; + aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol); + testcase( aCol==0 ); }else{ - zRight = sqlite3NameFromToken(db, pValue); - } - - assert( pId2 ); - zDb = pId2->n>0 ? pDb->zName : 0; - if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){ - goto pragma_out; + nCol = 0; + aCol = 0; } - -#ifndef SQLITE_OMIT_PAGER_PRAGMAS - /* - ** PRAGMA [database.]default_cache_size - ** PRAGMA [database.]default_cache_size=N - ** - ** The first form reports the current persistent setting for the - ** page cache size. The value returned is the maximum number of - ** pages in the page cache. The second form sets both the current - ** page cache size value and the persistent page cache size value - ** stored in the database file. - ** - ** Older versions of SQLite would set the default cache size to a - ** negative number to indicate synchronous=OFF. These days, synchronous - ** is always on by default regardless of the sign of the default cache - ** size. But continue to take the absolute value of the default cache - ** size of historical compatibility. - */ - if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){ - static const VdbeOpList getCacheSize[] = { - { OP_Transaction, 0, 0, 0}, /* 0 */ - { OP_ReadCookie, 0, 1, BTREE_DEFAULT_CACHE_SIZE}, /* 1 */ - { OP_IfPos, 1, 7, 0}, - { OP_Integer, 0, 2, 0}, - { OP_Subtract, 1, 2, 1}, - { OP_IfPos, 1, 7, 0}, - { OP_Integer, 0, 1, 0}, /* 6 */ - { OP_ResultRow, 1, 1, 0}, - }; - int addr; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - sqlite3VdbeUsesBtree(v, iDb); - if( !zRight ){ - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", SQLITE_STATIC); - pParse->nMem += 2; - addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize); - sqlite3VdbeChangeP1(v, addr, iDb); - sqlite3VdbeChangeP1(v, addr+1, iDb); - sqlite3VdbeChangeP1(v, addr+6, SQLITE_DEFAULT_CACHE_SIZE); - }else{ - int size = sqlite3AbsInt32(sqlite3Atoi(zRight)); - sqlite3BeginWriteOperation(pParse, 0, iDb); - sqlite3VdbeAddOp2(v, OP_Integer, size, 1); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, 1); - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pDb->pSchema->cache_size = size; - sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); - } - }else + *pnCol = nCol; + *paCol = aCol; - /* - ** PRAGMA [database.]page_size - ** PRAGMA [database.]page_size=N - ** - ** The first form reports the current setting for the - ** database page size in bytes. The second form sets the - ** database page size value. The value can only be set if - ** the database has not yet been created. - */ - if( sqlite3StrICmp(zLeft,"page_size")==0 ){ - Btree *pBt = pDb->pBt; - assert( pBt!=0 ); - if( !zRight ){ - int size = ALWAYS(pBt) ? sqlite3BtreeGetPageSize(pBt) : 0; - returnSingleInt(pParse, "page_size", size); + for(i=0, pCol=aCol; ia[i].pExpr); + if( (zName = pEList->a[i].zName)!=0 ){ + /* If the column contains an "AS " phrase, use as the name */ + zName = sqlite3DbStrDup(db, zName); }else{ - /* Malloc may fail when setting the page-size, as there is an internal - ** buffer that the pager module resizes using sqlite3_realloc(). - */ - db->nextPagesize = sqlite3Atoi(zRight); - if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1, 0) ){ - db->mallocFailed = 1; + Expr *pColExpr = p; /* The expression that is the result column name */ + Table *pTab; /* Table associated with this expression */ + while( pColExpr->op==TK_DOT ){ + pColExpr = pColExpr->pRight; + assert( pColExpr!=0 ); } - } - }else - - /* - ** PRAGMA [database.]secure_delete - ** PRAGMA [database.]secure_delete=ON/OFF - ** - ** The first form reports the current setting for the - ** secure_delete flag. The second form changes the secure_delete - ** flag setting and reports thenew value. - */ - if( sqlite3StrICmp(zLeft,"secure_delete")==0 ){ - Btree *pBt = pDb->pBt; - int b = -1; - assert( pBt!=0 ); - if( zRight ){ - b = sqlite3GetBoolean(zRight); - } - if( pId2->n==0 && b>=0 ){ - int ii; - for(ii=0; iinDb; ii++){ - sqlite3BtreeSecureDelete(db->aDb[ii].pBt, b); + if( pColExpr->op==TK_COLUMN && ALWAYS(pColExpr->pTab!=0) ){ + /* For columns use the column name name */ + int iCol = pColExpr->iColumn; + pTab = pColExpr->pTab; + if( iCol<0 ) iCol = pTab->iPKey; + zName = sqlite3MPrintf(db, "%s", + iCol>=0 ? pTab->aCol[iCol].zName : "rowid"); + }else if( pColExpr->op==TK_ID ){ + assert( !ExprHasProperty(pColExpr, EP_IntValue) ); + zName = sqlite3MPrintf(db, "%s", pColExpr->u.zToken); + }else{ + /* Use the original text of the column expression as its name */ + zName = sqlite3MPrintf(db, "%s", pEList->a[i].zSpan); } } - b = sqlite3BtreeSecureDelete(pBt, b); - returnSingleInt(pParse, "secure_delete", b); - }else - - /* - ** PRAGMA [database.]max_page_count - ** PRAGMA [database.]max_page_count=N - ** - ** The first form reports the current setting for the - ** maximum number of pages in the database file. The - ** second form attempts to change this setting. Both - ** forms return the current setting. - ** - ** PRAGMA [database.]page_count - ** - ** Return the number of pages in the specified database. - */ - if( sqlite3StrICmp(zLeft,"page_count")==0 - || sqlite3StrICmp(zLeft,"max_page_count")==0 - ){ - int iReg; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - sqlite3CodeVerifySchema(pParse, iDb); - iReg = ++pParse->nMem; - if( zLeft[0]=='p' ){ - sqlite3VdbeAddOp2(v, OP_Pagecount, iDb, iReg); - }else{ - sqlite3VdbeAddOp3(v, OP_MaxPgcnt, iDb, iReg, sqlite3Atoi(zRight)); + if( db->mallocFailed ){ + sqlite3DbFree(db, zName); + break; } - sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); - }else - - /* - ** PRAGMA [database.]locking_mode - ** PRAGMA [database.]locking_mode = (normal|exclusive) - */ - if( sqlite3StrICmp(zLeft,"locking_mode")==0 ){ - const char *zRet = "normal"; - int eMode = getLockingMode(zRight); - if( pId2->n==0 && eMode==PAGER_LOCKINGMODE_QUERY ){ - /* Simple "PRAGMA locking_mode;" statement. This is a query for - ** the current default locking mode (which may be different to - ** the locking-mode of the main database). - */ - eMode = db->dfltLockMode; - }else{ - Pager *pPager; - if( pId2->n==0 ){ - /* This indicates that no database name was specified as part - ** of the PRAGMA command. In this case the locking-mode must be - ** set on all attached databases, as well as the main db file. - ** - ** Also, the sqlite3.dfltLockMode variable is set so that - ** any subsequently attached databases also use the specified - ** locking mode. - */ - int ii; - assert(pDb==&db->aDb[0]); - for(ii=2; iinDb; ii++){ - pPager = sqlite3BtreePager(db->aDb[ii].pBt); - sqlite3PagerLockingMode(pPager, eMode); - } - db->dfltLockMode = (u8)eMode; + /* Make sure the column name is unique. If the name is not unique, + ** append an integer to the name so that it becomes unique. + */ + nName = sqlite3Strlen30(zName); + for(j=cnt=0; j1 && sqlite3Isdigit(zName[k]); k--){} + if( k>=0 && zName[k]==':' ) nName = k; + zName[nName] = 0; + zNewName = sqlite3MPrintf(db, "%s:%d", zName, ++cnt); + sqlite3DbFree(db, zName); + zName = zNewName; + j = -1; + if( zName==0 ) break; } - pPager = sqlite3BtreePager(pDb->pBt); - eMode = sqlite3PagerLockingMode(pPager, eMode); } - - assert(eMode==PAGER_LOCKINGMODE_NORMAL||eMode==PAGER_LOCKINGMODE_EXCLUSIVE); - if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){ - zRet = "exclusive"; + pCol->zName = zName; + } + if( db->mallocFailed ){ + for(j=0; jdb; + NameContext sNC; + Column *pCol; + CollSeq *pColl; + int i; + Expr *p; + struct ExprList_item *a; + u64 szAll = 0; - /* Force the schema to be loaded on all databases. This cases all - ** database files to be opened and the journal_modes set. */ - if( sqlite3ReadSchema(pParse) ){ - goto pragma_out; + assert( pSelect!=0 ); + assert( (pSelect->selFlags & SF_Resolved)!=0 ); + assert( pTab->nCol==pSelect->pEList->nExpr || db->mallocFailed ); + if( db->mallocFailed ) return; + memset(&sNC, 0, sizeof(sNC)); + sNC.pSrcList = pSelect->pSrc; + a = pSelect->pEList->a; + for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ + p = a[i].pExpr; + pCol->zType = sqlite3DbStrDup(db, columnType(&sNC, p,0,0,0, &pCol->szEst)); + szAll += pCol->szEst; + pCol->affinity = sqlite3ExprAffinity(p); + if( pCol->affinity==0 ) pCol->affinity = SQLITE_AFF_NONE; + pColl = sqlite3ExprCollSeq(pParse, p); + if( pColl ){ + pCol->zColl = sqlite3DbStrDup(db, pColl->zName); } + } + pTab->szTabRow = sqlite3LogEst(szAll*4); +} - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "journal_mode", SQLITE_STATIC); +/* +** Given a SELECT statement, generate a Table structure that describes +** the result set of that SELECT. +*/ +SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect){ + Table *pTab; + sqlite3 *db = pParse->db; + int savedFlags; - if( zRight==0 ){ - /* If there is no "=MODE" part of the pragma, do a query for the - ** current mode */ - eMode = PAGER_JOURNALMODE_QUERY; - }else{ - const char *zMode; - int n = sqlite3Strlen30(zRight); - for(eMode=0; (zMode = sqlite3JournalModename(eMode))!=0; eMode++){ - if( sqlite3StrNICmp(zRight, zMode, n)==0 ) break; - } - if( !zMode ){ - /* If the "=MODE" part does not match any known journal mode, - ** then do a query */ - eMode = PAGER_JOURNALMODE_QUERY; - } - } - if( eMode==PAGER_JOURNALMODE_QUERY && pId2->n==0 ){ - /* Convert "PRAGMA journal_mode" into "PRAGMA main.journal_mode" */ - iDb = 0; - pId2->n = 1; - } - for(ii=db->nDb-1; ii>=0; ii--){ - if( db->aDb[ii].pBt && (ii==iDb || pId2->n==0) ){ - sqlite3VdbeUsesBtree(v, ii); - sqlite3VdbeAddOp3(v, OP_JournalMode, ii, 1, eMode); - } - } - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); - }else + savedFlags = db->flags; + db->flags &= ~SQLITE_FullColNames; + db->flags |= SQLITE_ShortColNames; + sqlite3SelectPrep(pParse, pSelect, 0); + if( pParse->nErr ) return 0; + while( pSelect->pPrior ) pSelect = pSelect->pPrior; + db->flags = savedFlags; + pTab = sqlite3DbMallocZero(db, sizeof(Table) ); + if( pTab==0 ){ + return 0; + } + /* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside + ** is disabled */ + assert( db->lookaside.bEnabled==0 ); + pTab->nRef = 1; + pTab->zName = 0; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + selectColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol); + selectAddColumnTypeAndCollation(pParse, pTab, pSelect); + pTab->iPKey = -1; + if( db->mallocFailed ){ + sqlite3DeleteTable(db, pTab); + return 0; + } + return pTab; +} - /* - ** PRAGMA [database.]journal_size_limit - ** PRAGMA [database.]journal_size_limit=N - ** - ** Get or set the size limit on rollback journal files. - */ - if( sqlite3StrICmp(zLeft,"journal_size_limit")==0 ){ - Pager *pPager = sqlite3BtreePager(pDb->pBt); - i64 iLimit = -2; - if( zRight ){ - sqlite3Atoi64(zRight, &iLimit, 1000000, SQLITE_UTF8); - if( iLimit<-1 ) iLimit = -1; +/* +** Get a VDBE for the given parser context. Create a new one if necessary. +** If an error occurs, return NULL and leave a message in pParse. +*/ +SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ + Vdbe *v = pParse->pVdbe; + if( v==0 ){ + v = pParse->pVdbe = sqlite3VdbeCreate(pParse); + if( v ) sqlite3VdbeAddOp0(v, OP_Init); + if( pParse->pToplevel==0 + && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst) + ){ + pParse->okConstFactor = 1; } - iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit); - returnSingleInt(pParse, "journal_size_limit", iLimit); - }else -#endif /* SQLITE_OMIT_PAGER_PRAGMAS */ + } + return v; +} + - /* - ** PRAGMA [database.]auto_vacuum - ** PRAGMA [database.]auto_vacuum=N - ** - ** Get or set the value of the database 'auto-vacuum' parameter. - ** The value is one of: 0 NONE 1 FULL 2 INCREMENTAL +/* +** Compute the iLimit and iOffset fields of the SELECT based on the +** pLimit and pOffset expressions. pLimit and pOffset hold the expressions +** that appear in the original SQL statement after the LIMIT and OFFSET +** keywords. Or NULL if those keywords are omitted. iLimit and iOffset +** are the integer memory register numbers for counters used to compute +** the limit and offset. If there is no limit and/or offset, then +** iLimit and iOffset are negative. +** +** This routine changes the values of iLimit and iOffset only if +** a limit or offset is defined by pLimit and pOffset. iLimit and +** iOffset should have been preset to appropriate default values (zero) +** prior to calling this routine. +** +** The iOffset register (if it exists) is initialized to the value +** of the OFFSET. The iLimit register is initialized to LIMIT. Register +** iOffset+1 is initialized to LIMIT+OFFSET. +** +** Only if pLimit!=0 or pOffset!=0 do the limit registers get +** redefined. The UNION ALL operator uses this property to force +** the reuse of the same limit and offset registers across multiple +** SELECT statements. +*/ +static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ + Vdbe *v = 0; + int iLimit = 0; + int iOffset; + int addr1, n; + if( p->iLimit ) return; + + /* + ** "LIMIT -1" always shows all rows. There is some + ** controversy about what the correct behavior should be. + ** The current implementation interprets "LIMIT 0" to mean + ** no rows. */ -#ifndef SQLITE_OMIT_AUTOVACUUM - if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){ - Btree *pBt = pDb->pBt; - assert( pBt!=0 ); - if( sqlite3ReadSchema(pParse) ){ - goto pragma_out; - } - if( !zRight ){ - int auto_vacuum; - if( ALWAYS(pBt) ){ - auto_vacuum = sqlite3BtreeGetAutoVacuum(pBt); - }else{ - auto_vacuum = SQLITE_DEFAULT_AUTOVACUUM; + sqlite3ExprCacheClear(pParse); + assert( p->pOffset==0 || p->pLimit!=0 ); + if( p->pLimit ){ + p->iLimit = iLimit = ++pParse->nMem; + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); + if( sqlite3ExprIsInteger(p->pLimit, &n) ){ + sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit); + VdbeComment((v, "LIMIT counter")); + if( n==0 ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, iBreak); + }else if( n>=0 && p->nSelectRow>(u64)n ){ + p->nSelectRow = n; } - returnSingleInt(pParse, "auto_vacuum", auto_vacuum); }else{ - int eAuto = getAutoVacuum(zRight); - assert( eAuto>=0 && eAuto<=2 ); - db->nextAutovac = (u8)eAuto; - if( ALWAYS(eAuto>=0) ){ - /* Call SetAutoVacuum() to set initialize the internal auto and - ** incr-vacuum flags. This is required in case this connection - ** creates the database file. It is important that it is created - ** as an auto-vacuum capable db. - */ - int rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto); - if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){ - /* When setting the auto_vacuum mode to either "full" or - ** "incremental", write the value of meta[6] in the database - ** file. Before writing to meta[6], check that meta[3] indicates - ** that this really is an auto-vacuum capable database. - */ - static const VdbeOpList setMeta6[] = { - { OP_Transaction, 0, 1, 0}, /* 0 */ - { OP_ReadCookie, 0, 1, BTREE_LARGEST_ROOT_PAGE}, - { OP_If, 1, 0, 0}, /* 2 */ - { OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */ - { OP_Integer, 0, 1, 0}, /* 4 */ - { OP_SetCookie, 0, BTREE_INCR_VACUUM, 1}, /* 5 */ - }; - int iAddr; - iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6); - sqlite3VdbeChangeP1(v, iAddr, iDb); - sqlite3VdbeChangeP1(v, iAddr+1, iDb); - sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4); - sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1); - sqlite3VdbeChangeP1(v, iAddr+5, iDb); - sqlite3VdbeUsesBtree(v, iDb); - } - } - } - }else -#endif - - /* - ** PRAGMA [database.]incremental_vacuum(N) - ** - ** Do N steps of incremental vacuuming on a database. - */ -#ifndef SQLITE_OMIT_AUTOVACUUM - if( sqlite3StrICmp(zLeft,"incremental_vacuum")==0 ){ - int iLimit, addr; - if( sqlite3ReadSchema(pParse) ){ - goto pragma_out; + sqlite3ExprCode(pParse, p->pLimit, iLimit); + sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v); + VdbeComment((v, "LIMIT counter")); + sqlite3VdbeAddOp2(v, OP_IfZero, iLimit, iBreak); VdbeCoverage(v); } - if( zRight==0 || !sqlite3GetInt32(zRight, &iLimit) || iLimit<=0 ){ - iLimit = 0x7fffffff; + if( p->pOffset ){ + p->iOffset = iOffset = ++pParse->nMem; + pParse->nMem++; /* Allocate an extra register for limit+offset */ + sqlite3ExprCode(pParse, p->pOffset, iOffset); + sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v); + VdbeComment((v, "OFFSET counter")); + addr1 = sqlite3VdbeAddOp1(v, OP_IfPos, iOffset); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Integer, 0, iOffset); + sqlite3VdbeJumpHere(v, addr1); + sqlite3VdbeAddOp3(v, OP_Add, iLimit, iOffset, iOffset+1); + VdbeComment((v, "LIMIT+OFFSET")); + addr1 = sqlite3VdbeAddOp1(v, OP_IfPos, iLimit); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Integer, -1, iOffset+1); + sqlite3VdbeJumpHere(v, addr1); } - sqlite3BeginWriteOperation(pParse, 0, iDb); - sqlite3VdbeAddOp2(v, OP_Integer, iLimit, 1); - addr = sqlite3VdbeAddOp1(v, OP_IncrVacuum, iDb); - sqlite3VdbeAddOp1(v, OP_ResultRow, 1); - sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); - sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr); - sqlite3VdbeJumpHere(v, addr); - }else -#endif + } +} -#ifndef SQLITE_OMIT_PAGER_PRAGMAS - /* - ** PRAGMA [database.]cache_size - ** PRAGMA [database.]cache_size=N - ** - ** The first form reports the current local setting for the - ** page cache size. The local setting can be different from - ** the persistent cache size value that is stored in the database - ** file itself. The value returned is the maximum number of - ** pages in the page cache. The second form sets the local - ** page cache size value. It does not change the persistent - ** cache size stored on the disk so the cache size will revert - ** to its default value when the database is closed and reopened. - ** N should be a positive integer. - */ - if( sqlite3StrICmp(zLeft,"cache_size")==0 ){ - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( !zRight ){ - returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size); - }else{ - int size = sqlite3AbsInt32(sqlite3Atoi(zRight)); - pDb->pSchema->cache_size = size; - sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); - } - }else +#ifndef SQLITE_OMIT_COMPOUND_SELECT +/* +** Return the appropriate collating sequence for the iCol-th column of +** the result set for the compound-select statement "p". Return NULL if +** the column has no default collating sequence. +** +** The collating sequence for the compound select is taken from the +** left-most term of the select that has a collating sequence. +*/ +static CollSeq *multiSelectCollSeq(Parse *pParse, Select *p, int iCol){ + CollSeq *pRet; + if( p->pPrior ){ + pRet = multiSelectCollSeq(pParse, p->pPrior, iCol); + }else{ + pRet = 0; + } + assert( iCol>=0 ); + if( pRet==0 && iColpEList->nExpr ){ + pRet = sqlite3ExprCollSeq(pParse, p->pEList->a[iCol].pExpr); + } + return pRet; +} - /* - ** PRAGMA temp_store - ** PRAGMA temp_store = "default"|"memory"|"file" - ** - ** Return or set the local value of the temp_store flag. Changing - ** the local value does not make changes to the disk file and the default - ** value will be restored the next time the database is opened. - ** - ** Note that it is possible for the library compile-time options to - ** override this setting - */ - if( sqlite3StrICmp(zLeft, "temp_store")==0 ){ - if( !zRight ){ - returnSingleInt(pParse, "temp_store", db->temp_store); - }else{ - changeTempStorage(pParse, zRight); - } - }else +/* +** The select statement passed as the second parameter is a compound SELECT +** with an ORDER BY clause. This function allocates and returns a KeyInfo +** structure suitable for implementing the ORDER BY. +** +** Space to hold the KeyInfo structure is obtained from malloc. The calling +** function is responsible for ensuring that this structure is eventually +** freed. +*/ +static KeyInfo *multiSelectOrderByKeyInfo(Parse *pParse, Select *p, int nExtra){ + ExprList *pOrderBy = p->pOrderBy; + int nOrderBy = p->pOrderBy->nExpr; + sqlite3 *db = pParse->db; + KeyInfo *pRet = sqlite3KeyInfoAlloc(db, nOrderBy+nExtra, 1); + if( pRet ){ + int i; + for(i=0; ia[i]; + Expr *pTerm = pItem->pExpr; + CollSeq *pColl; - /* - ** PRAGMA temp_store_directory - ** PRAGMA temp_store_directory = ""|"directory_name" - ** - ** Return or set the local value of the temp_store_directory flag. Changing - ** the value sets a specific directory to be used for temporary files. - ** Setting to a null string reverts to the default temporary directory search. - ** If temporary directory is changed, then invalidateTempStorage. - ** - */ - if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){ - if( !zRight ){ - if( sqlite3_temp_directory ){ - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, - "temp_store_directory", SQLITE_STATIC); - sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_temp_directory, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); - } - }else{ -#ifndef SQLITE_OMIT_WSD - if( zRight[0] ){ - int rc; - int res; - rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res); - if( rc!=SQLITE_OK || res==0 ){ - sqlite3ErrorMsg(pParse, "not a writable directory"); - goto pragma_out; - } - } - if( SQLITE_TEMP_STORE==0 - || (SQLITE_TEMP_STORE==1 && db->temp_store<=1) - || (SQLITE_TEMP_STORE==2 && db->temp_store==1) - ){ - invalidateTempStorage(pParse); - } - sqlite3_free(sqlite3_temp_directory); - if( zRight[0] ){ - sqlite3_temp_directory = sqlite3_mprintf("%s", zRight); + if( pTerm->flags & EP_Collate ){ + pColl = sqlite3ExprCollSeq(pParse, pTerm); }else{ - sqlite3_temp_directory = 0; + pColl = multiSelectCollSeq(pParse, p, pItem->u.x.iOrderByCol-1); + if( pColl==0 ) pColl = db->pDfltColl; + pOrderBy->a[i].pExpr = + sqlite3ExprAddCollateString(pParse, pTerm, pColl->zName); } -#endif /* SQLITE_OMIT_WSD */ + assert( sqlite3KeyInfoIsWriteable(pRet) ); + pRet->aColl[i] = pColl; + pRet->aSortOrder[i] = pOrderBy->a[i].sortOrder; } - }else + } -#if !defined(SQLITE_ENABLE_LOCKING_STYLE) -# if defined(__APPLE__) -# define SQLITE_ENABLE_LOCKING_STYLE 1 -# else -# define SQLITE_ENABLE_LOCKING_STYLE 0 -# endif -#endif -#if SQLITE_ENABLE_LOCKING_STYLE - /* - ** PRAGMA [database.]lock_proxy_file - ** PRAGMA [database.]lock_proxy_file = ":auto:"|"lock_file_path" - ** - ** Return or set the value of the lock_proxy_file flag. Changing - ** the value sets a specific file to be used for database access locks. - ** - */ - if( sqlite3StrICmp(zLeft, "lock_proxy_file")==0 ){ - if( !zRight ){ - Pager *pPager = sqlite3BtreePager(pDb->pBt); - char *proxy_file_path = NULL; - sqlite3_file *pFile = sqlite3PagerFile(pPager); - sqlite3OsFileControl(pFile, SQLITE_GET_LOCKPROXYFILE, - &proxy_file_path); - - if( proxy_file_path ){ - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, - "lock_proxy_file", SQLITE_STATIC); - sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, proxy_file_path, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); - } - }else{ - Pager *pPager = sqlite3BtreePager(pDb->pBt); - sqlite3_file *pFile = sqlite3PagerFile(pPager); - int res; - if( zRight[0] ){ - res=sqlite3OsFileControl(pFile, SQLITE_SET_LOCKPROXYFILE, - zRight); - } else { - res=sqlite3OsFileControl(pFile, SQLITE_SET_LOCKPROXYFILE, - NULL); - } - if( res!=SQLITE_OK ){ - sqlite3ErrorMsg(pParse, "failed to set lock proxy file"); - goto pragma_out; - } - } - }else -#endif /* SQLITE_ENABLE_LOCKING_STYLE */ - - /* - ** PRAGMA [database.]synchronous - ** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL - ** - ** Return or set the local value of the synchronous flag. Changing - ** the local value does not make changes to the disk file and the - ** default value will be restored the next time the database is - ** opened. - */ - if( sqlite3StrICmp(zLeft,"synchronous")==0 ){ - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - if( !zRight ){ - returnSingleInt(pParse, "synchronous", pDb->safety_level-1); - }else{ - if( !db->autoCommit ){ - sqlite3ErrorMsg(pParse, - "Safety level may not be changed inside a transaction"); - }else{ - pDb->safety_level = getSafetyLevel(zRight)+1; - } - } - }else -#endif /* SQLITE_OMIT_PAGER_PRAGMAS */ + return pRet; +} -#ifndef SQLITE_OMIT_FLAG_PRAGMAS - if( flagPragma(pParse, zLeft, zRight) ){ - /* The flagPragma() subroutine also generates any necessary code - ** there is nothing more to do here */ - }else -#endif /* SQLITE_OMIT_FLAG_PRAGMAS */ +#ifndef SQLITE_OMIT_CTE +/* +** This routine generates VDBE code to compute the content of a WITH RECURSIVE +** query of the form: +** +** AS ( UNION [ALL] ) +** \___________/ \_______________/ +** p->pPrior p +** +** +** There is exactly one reference to the recursive-table in the FROM clause +** of recursive-query, marked with the SrcList->a[].isRecursive flag. +** +** The setup-query runs once to generate an initial set of rows that go +** into a Queue table. Rows are extracted from the Queue table one by +** one. Each row extracted from Queue is output to pDest. Then the single +** extracted row (now in the iCurrent table) becomes the content of the +** recursive-table for a recursive-query run. The output of the recursive-query +** is added back into the Queue table. Then another row is extracted from Queue +** and the iteration continues until the Queue table is empty. +** +** If the compound query operator is UNION then no duplicate rows are ever +** inserted into the Queue table. The iDistinct table keeps a copy of all rows +** that have ever been inserted into Queue and causes duplicates to be +** discarded. If the operator is UNION ALL, then duplicates are allowed. +** +** If the query has an ORDER BY, then entries in the Queue table are kept in +** ORDER BY order and the first entry is extracted for each cycle. Without +** an ORDER BY, the Queue table is just a FIFO. +** +** If a LIMIT clause is provided, then the iteration stops after LIMIT rows +** have been output to pDest. A LIMIT of zero means to output no rows and a +** negative LIMIT means to output all rows. If there is also an OFFSET clause +** with a positive value, then the first OFFSET outputs are discarded rather +** than being sent to pDest. The LIMIT count does not begin until after OFFSET +** rows have been skipped. +*/ +static void generateWithRecursiveQuery( + Parse *pParse, /* Parsing context */ + Select *p, /* The recursive SELECT to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + SrcList *pSrc = p->pSrc; /* The FROM clause of the recursive query */ + int nCol = p->pEList->nExpr; /* Number of columns in the recursive table */ + Vdbe *v = pParse->pVdbe; /* The prepared statement under construction */ + Select *pSetup = p->pPrior; /* The setup query */ + int addrTop; /* Top of the loop */ + int addrCont, addrBreak; /* CONTINUE and BREAK addresses */ + int iCurrent = 0; /* The Current table */ + int regCurrent; /* Register holding Current table */ + int iQueue; /* The Queue table */ + int iDistinct = 0; /* To ensure unique results if UNION */ + int eDest = SRT_Fifo; /* How to write to Queue */ + SelectDest destQueue; /* SelectDest targetting the Queue table */ + int i; /* Loop counter */ + int rc; /* Result code */ + ExprList *pOrderBy; /* The ORDER BY clause */ + Expr *pLimit, *pOffset; /* Saved LIMIT and OFFSET */ + int regLimit, regOffset; /* Registers used by LIMIT and OFFSET */ + + /* Obtain authorization to do a recursive query */ + if( sqlite3AuthCheck(pParse, SQLITE_RECURSIVE, 0, 0, 0) ) return; + + /* Process the LIMIT and OFFSET clauses, if they exist */ + addrBreak = sqlite3VdbeMakeLabel(v); + computeLimitRegisters(pParse, p, addrBreak); + pLimit = p->pLimit; + pOffset = p->pOffset; + regLimit = p->iLimit; + regOffset = p->iOffset; + p->pLimit = p->pOffset = 0; + p->iLimit = p->iOffset = 0; + pOrderBy = p->pOrderBy; -#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS - /* - ** PRAGMA table_info(
) - ** - ** Return a single row for each column of the named table. The columns of - ** the returned data set are: - ** - ** cid: Column id (numbered from left to right, starting at 0) - ** name: Column name - ** type: Column declaration type. - ** notnull: True if 'NOT NULL' is part of column declaration - ** dflt_value: The default value for the column, if any. - */ - if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){ - Table *pTab; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - pTab = sqlite3FindTable(db, zRight, zDb); - if( pTab ){ - int i; - int nHidden = 0; - Column *pCol; - sqlite3VdbeSetNumCols(v, 6); - pParse->nMem = 6; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", SQLITE_STATIC); - sqlite3ViewGetColumnNames(pParse, pTab); - for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ - if( IsHiddenColumn(pCol) ){ - nHidden++; - continue; - } - sqlite3VdbeAddOp2(v, OP_Integer, i-nHidden, 1); - sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pCol->zName, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, - pCol->zType ? pCol->zType : "", 0); - sqlite3VdbeAddOp2(v, OP_Integer, (pCol->notNull ? 1 : 0), 4); - if( pCol->zDflt ){ - sqlite3VdbeAddOp4(v, OP_String8, 0, 5, 0, (char*)pCol->zDflt, 0); - }else{ - sqlite3VdbeAddOp2(v, OP_Null, 0, 5); - } - sqlite3VdbeAddOp2(v, OP_Integer, pCol->isPrimKey, 6); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6); - } + /* Locate the cursor number of the Current table */ + for(i=0; ALWAYS(inSrc); i++){ + if( pSrc->a[i].isRecursive ){ + iCurrent = pSrc->a[i].iCursor; + break; } - }else + } - if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){ - Index *pIdx; - Table *pTab; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - pIdx = sqlite3FindIndex(db, zRight, zDb); - if( pIdx ){ - int i; - pTab = pIdx->pTable; - sqlite3VdbeSetNumCols(v, 3); - pParse->nMem = 3; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", SQLITE_STATIC); - for(i=0; inColumn; i++){ - int cnum = pIdx->aiColumn[i]; - sqlite3VdbeAddOp2(v, OP_Integer, i, 1); - sqlite3VdbeAddOp2(v, OP_Integer, cnum, 2); - assert( pTab->nCol>cnum ); - sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pTab->aCol[cnum].zName, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); - } - } - }else + /* Allocate cursors numbers for Queue and Distinct. The cursor number for + ** the Distinct table must be exactly one greater than Queue in order + ** for the SRT_DistFifo and SRT_DistQueue destinations to work. */ + iQueue = pParse->nTab++; + if( p->op==TK_UNION ){ + eDest = pOrderBy ? SRT_DistQueue : SRT_DistFifo; + iDistinct = pParse->nTab++; + }else{ + eDest = pOrderBy ? SRT_Queue : SRT_Fifo; + } + sqlite3SelectDestInit(&destQueue, eDest, iQueue); - if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){ - Index *pIdx; - Table *pTab; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - pTab = sqlite3FindTable(db, zRight, zDb); - if( pTab ){ - v = sqlite3GetVdbe(pParse); - pIdx = pTab->pIndex; - if( pIdx ){ - int i = 0; - sqlite3VdbeSetNumCols(v, 3); - pParse->nMem = 3; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", SQLITE_STATIC); - while(pIdx){ - sqlite3VdbeAddOp2(v, OP_Integer, i, 1); - sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0); - sqlite3VdbeAddOp2(v, OP_Integer, pIdx->onError!=OE_None, 3); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); - ++i; - pIdx = pIdx->pNext; - } - } - } - }else + /* Allocate cursors for Current, Queue, and Distinct. */ + regCurrent = ++pParse->nMem; + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iCurrent, regCurrent, nCol); + if( pOrderBy ){ + KeyInfo *pKeyInfo = multiSelectOrderByKeyInfo(pParse, p, 1); + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, iQueue, pOrderBy->nExpr+2, 0, + (char*)pKeyInfo, P4_KEYINFO); + destQueue.pOrderBy = pOrderBy; + }else{ + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iQueue, nCol); + } + VdbeComment((v, "Queue table")); + if( iDistinct ){ + p->addrOpenEphm[0] = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iDistinct, 0); + p->selFlags |= SF_UsesEphemeral; + } - if( sqlite3StrICmp(zLeft, "database_list")==0 ){ - int i; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - sqlite3VdbeSetNumCols(v, 3); - pParse->nMem = 3; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", SQLITE_STATIC); - for(i=0; inDb; i++){ - if( db->aDb[i].pBt==0 ) continue; - assert( db->aDb[i].zName!=0 ); - sqlite3VdbeAddOp2(v, OP_Integer, i, 1); - sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, db->aDb[i].zName, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, - sqlite3BtreeGetFilename(db->aDb[i].pBt), 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); - } - }else + /* Detach the ORDER BY clause from the compound SELECT */ + p->pOrderBy = 0; - if( sqlite3StrICmp(zLeft, "collation_list")==0 ){ - int i = 0; - HashElem *p; - sqlite3VdbeSetNumCols(v, 2); - pParse->nMem = 2; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", SQLITE_STATIC); - for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){ - CollSeq *pColl = (CollSeq *)sqliteHashData(p); - sqlite3VdbeAddOp2(v, OP_Integer, i++, 1); - sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pColl->zName, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); - } - }else -#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */ + /* Store the results of the setup-query in Queue. */ + pSetup->pNext = 0; + rc = sqlite3Select(pParse, pSetup, &destQueue); + pSetup->pNext = p; + if( rc ) goto end_of_recursive_query; -#ifndef SQLITE_OMIT_FOREIGN_KEY - if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){ - FKey *pFK; - Table *pTab; - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - pTab = sqlite3FindTable(db, zRight, zDb); - if( pTab ){ - v = sqlite3GetVdbe(pParse); - pFK = pTab->pFKey; - if( pFK ){ - int i = 0; - sqlite3VdbeSetNumCols(v, 8); - pParse->nMem = 8; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "on_update", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 6, COLNAME_NAME, "on_delete", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 7, COLNAME_NAME, "match", SQLITE_STATIC); - while(pFK){ - int j; - for(j=0; jnCol; j++){ - char *zCol = pFK->aCol[j].zCol; - char *zOnDelete = (char *)actionName(pFK->aAction[0]); - char *zOnUpdate = (char *)actionName(pFK->aAction[1]); - sqlite3VdbeAddOp2(v, OP_Integer, i, 1); - sqlite3VdbeAddOp2(v, OP_Integer, j, 2); - sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pFK->zTo, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, - pTab->aCol[pFK->aCol[j].iFrom].zName, 0); - sqlite3VdbeAddOp4(v, zCol ? OP_String8 : OP_Null, 0, 5, 0, zCol, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 6, 0, zOnUpdate, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 7, 0, zOnDelete, 0); - sqlite3VdbeAddOp4(v, OP_String8, 0, 8, 0, "NONE", 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 8); - } - ++i; - pFK = pFK->pNextFrom; - } - } - } - }else -#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */ + /* Find the next row in the Queue and output that row */ + addrTop = sqlite3VdbeAddOp2(v, OP_Rewind, iQueue, addrBreak); VdbeCoverage(v); -#ifndef NDEBUG - if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){ - if( zRight ){ - if( sqlite3GetBoolean(zRight) ){ - sqlite3ParserTrace(stderr, "parser: "); - }else{ - sqlite3ParserTrace(0, 0); - } - } - }else + /* Transfer the next row in Queue over to Current */ + sqlite3VdbeAddOp1(v, OP_NullRow, iCurrent); /* To reset column cache */ + if( pOrderBy ){ + sqlite3VdbeAddOp3(v, OP_Column, iQueue, pOrderBy->nExpr+1, regCurrent); + }else{ + sqlite3VdbeAddOp2(v, OP_RowData, iQueue, regCurrent); + } + sqlite3VdbeAddOp1(v, OP_Delete, iQueue); + + /* Output the single row in Current */ + addrCont = sqlite3VdbeMakeLabel(v); + codeOffset(v, regOffset, addrCont); + selectInnerLoop(pParse, p, p->pEList, iCurrent, + 0, 0, pDest, addrCont, addrBreak); + if( regLimit ){ + sqlite3VdbeAddOp3(v, OP_IfZero, regLimit, addrBreak, -1); + VdbeCoverage(v); + } + sqlite3VdbeResolveLabel(v, addrCont); + + /* Execute the recursive SELECT taking the single row in Current as + ** the value for the recursive-table. Store the results in the Queue. + */ + p->pPrior = 0; + sqlite3Select(pParse, p, &destQueue); + assert( p->pPrior==0 ); + p->pPrior = pSetup; + + /* Keep running the loop until the Queue is empty */ + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrTop); + sqlite3VdbeResolveLabel(v, addrBreak); + +end_of_recursive_query: + sqlite3ExprListDelete(pParse->db, p->pOrderBy); + p->pOrderBy = pOrderBy; + p->pLimit = pLimit; + p->pOffset = pOffset; + return; +} +#endif /* SQLITE_OMIT_CTE */ + +/* Forward references */ +static int multiSelectOrderBy( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +); + + +/* +** This routine is called to process a compound query form from +** two or more separate queries using UNION, UNION ALL, EXCEPT, or +** INTERSECT +** +** "p" points to the right-most of the two queries. the query on the +** left is p->pPrior. The left query could also be a compound query +** in which case this routine will be called recursively. +** +** The results of the total query are to be written into a destination +** of type eDest with parameter iParm. +** +** Example 1: Consider a three-way compound SQL statement. +** +** SELECT a FROM t1 UNION SELECT b FROM t2 UNION SELECT c FROM t3 +** +** This statement is parsed up as follows: +** +** SELECT c FROM t3 +** | +** `-----> SELECT b FROM t2 +** | +** `------> SELECT a FROM t1 +** +** The arrows in the diagram above represent the Select.pPrior pointer. +** So if this routine is called with p equal to the t3 query, then +** pPrior will be the t2 query. p->op will be TK_UNION in this case. +** +** Notice that because of the way SQLite parses compound SELECTs, the +** individual selects always group from left to right. +*/ +static int multiSelect( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + int rc = SQLITE_OK; /* Success code from a subroutine */ + Select *pPrior; /* Another SELECT immediately to our left */ + Vdbe *v; /* Generate code to this VDBE */ + SelectDest dest; /* Alternative data destination */ + Select *pDelete = 0; /* Chain of simple selects to delete */ + sqlite3 *db; /* Database connection */ +#ifndef SQLITE_OMIT_EXPLAIN + int iSub1 = 0; /* EQP id of left-hand query */ + int iSub2 = 0; /* EQP id of right-hand query */ #endif - /* Reinstall the LIKE and GLOB functions. The variant of LIKE - ** used will be case sensitive or not depending on the RHS. + /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs. Only + ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT. */ - if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){ - if( zRight ){ - sqlite3RegisterLikeFunctions(db, sqlite3GetBoolean(zRight)); - } - }else + assert( p && p->pPrior ); /* Calling function guarantees this much */ + assert( (p->selFlags & SF_Recursive)==0 || p->op==TK_ALL || p->op==TK_UNION ); + db = pParse->db; + pPrior = p->pPrior; + dest = *pDest; + if( pPrior->pOrderBy ){ + sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before", + selectOpName(p->op)); + rc = 1; + goto multi_select_end; + } + if( pPrior->pLimit ){ + sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before", + selectOpName(p->op)); + rc = 1; + goto multi_select_end; + } -#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX -# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100 -#endif + v = sqlite3GetVdbe(pParse); + assert( v!=0 ); /* The VDBE already created by calling function */ -#ifndef SQLITE_OMIT_INTEGRITY_CHECK - /* Pragma "quick_check" is an experimental reduced version of - ** integrity_check designed to detect most database corruption - ** without most of the overhead of a full integrity-check. + /* Create the destination temporary table if necessary */ - if( sqlite3StrICmp(zLeft, "integrity_check")==0 - || sqlite3StrICmp(zLeft, "quick_check")==0 - ){ - int i, j, addr, mxErr; + if( dest.eDest==SRT_EphemTab ){ + assert( p->pEList ); + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, dest.iSDParm, p->pEList->nExpr); + sqlite3VdbeChangeP5(v, BTREE_UNORDERED); + dest.eDest = SRT_Table; + } - /* Code that appears at the end of the integrity check. If no error - ** messages have been generated, output OK. Otherwise output the - ** error message - */ - static const VdbeOpList endCode[] = { - { OP_AddImm, 1, 0, 0}, /* 0 */ - { OP_IfNeg, 1, 0, 0}, /* 1 */ - { OP_String8, 0, 3, 0}, /* 2 */ - { OP_ResultRow, 3, 1, 0}, - }; + /* Make sure all SELECTs in the statement have the same number of elements + ** in their result sets. + */ + assert( p->pEList && pPrior->pEList ); + if( p->pEList->nExpr!=pPrior->pEList->nExpr ){ + if( p->selFlags & SF_Values ){ + sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms"); + }else{ + sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s" + " do not have the same number of result columns", selectOpName(p->op)); + } + rc = 1; + goto multi_select_end; + } - int isQuick = (zLeft[0]=='q'); +#ifndef SQLITE_OMIT_CTE + if( p->selFlags & SF_Recursive ){ + generateWithRecursiveQuery(pParse, p, &dest); + }else +#endif - /* Initialize the VDBE program */ - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - pParse->nMem = 6; - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", SQLITE_STATIC); + /* Compound SELECTs that have an ORDER BY clause are handled separately. + */ + if( p->pOrderBy ){ + return multiSelectOrderBy(pParse, p, pDest); + }else - /* Set the maximum error count */ - mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; - if( zRight ){ - sqlite3GetInt32(zRight, &mxErr); - if( mxErr<=0 ){ - mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; + /* Generate code for the left and right SELECT statements. + */ + switch( p->op ){ + case TK_ALL: { + int addr = 0; + int nLimit; + assert( !pPrior->pLimit ); + pPrior->iLimit = p->iLimit; + pPrior->iOffset = p->iOffset; + pPrior->pLimit = p->pLimit; + pPrior->pOffset = p->pOffset; + explainSetInteger(iSub1, pParse->iNextSelectId); + rc = sqlite3Select(pParse, pPrior, &dest); + p->pLimit = 0; + p->pOffset = 0; + if( rc ){ + goto multi_select_end; + } + p->pPrior = 0; + p->iLimit = pPrior->iLimit; + p->iOffset = pPrior->iOffset; + if( p->iLimit ){ + addr = sqlite3VdbeAddOp1(v, OP_IfZero, p->iLimit); VdbeCoverage(v); + VdbeComment((v, "Jump ahead if LIMIT reached")); + } + explainSetInteger(iSub2, pParse->iNextSelectId); + rc = sqlite3Select(pParse, p, &dest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->nSelectRow += pPrior->nSelectRow; + if( pPrior->pLimit + && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit) + && nLimit>0 && p->nSelectRow > (u64)nLimit + ){ + p->nSelectRow = nLimit; } + if( addr ){ + sqlite3VdbeJumpHere(v, addr); + } + break; } - sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */ - - /* Do an integrity check on each database file */ - for(i=0; inDb; i++){ - HashElem *x; - Hash *pTbls; - int cnt = 0; - - if( OMIT_TEMPDB && i==1 ) continue; - - sqlite3CodeVerifySchema(pParse, i); - addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */ - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeJumpHere(v, addr); + case TK_EXCEPT: + case TK_UNION: { + int unionTab; /* Cursor number of the temporary table holding result */ + u8 op = 0; /* One of the SRT_ operations to apply to self */ + int priorOp; /* The SRT_ operation to apply to prior selects */ + Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */ + int addr; + SelectDest uniondest; - /* Do an integrity check of the B-Tree - ** - ** Begin by filling registers 2, 3, ... with the root pages numbers - ** for all tables and indices in the database. - */ - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pTbls = &db->aDb[i].pSchema->tblHash; - for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ - Table *pTab = sqliteHashData(x); - Index *pIdx; - sqlite3VdbeAddOp2(v, OP_Integer, pTab->tnum, 2+cnt); - cnt++; - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - sqlite3VdbeAddOp2(v, OP_Integer, pIdx->tnum, 2+cnt); - cnt++; - } + testcase( p->op==TK_EXCEPT ); + testcase( p->op==TK_UNION ); + priorOp = SRT_Union; + if( dest.eDest==priorOp ){ + /* We can reuse a temporary table generated by a SELECT to our + ** right. + */ + assert( p->pLimit==0 ); /* Not allowed on leftward elements */ + assert( p->pOffset==0 ); /* Not allowed on leftward elements */ + unionTab = dest.iSDParm; + }else{ + /* We will need to create our own temporary table to hold the + ** intermediate results. + */ + unionTab = pParse->nTab++; + assert( p->pOrderBy==0 ); + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); } - /* Make sure sufficient number of registers have been allocated */ - if( pParse->nMem < cnt+4 ){ - pParse->nMem = cnt+4; + /* Code the SELECT statements to our left + */ + assert( !pPrior->pOrderBy ); + sqlite3SelectDestInit(&uniondest, priorOp, unionTab); + explainSetInteger(iSub1, pParse->iNextSelectId); + rc = sqlite3Select(pParse, pPrior, &uniondest); + if( rc ){ + goto multi_select_end; } - /* Do the b-tree integrity checks */ - sqlite3VdbeAddOp3(v, OP_IntegrityCk, 2, cnt, 1); - sqlite3VdbeChangeP5(v, (u8)i); - addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2); - sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, - sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName), - P4_DYNAMIC); - sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2); - sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1); - sqlite3VdbeJumpHere(v, addr); - - /* Make sure all the indices are constructed correctly. + /* Code the current SELECT statement */ - for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){ - Table *pTab = sqliteHashData(x); - Index *pIdx; - int loopTop; - - if( pTab->pIndex==0 ) continue; - addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */ - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeJumpHere(v, addr); - sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead); - sqlite3VdbeAddOp2(v, OP_Integer, 0, 2); /* reg(2) will count entries */ - loopTop = sqlite3VdbeAddOp2(v, OP_Rewind, 1, 0); - sqlite3VdbeAddOp2(v, OP_AddImm, 2, 1); /* increment entry count */ - for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - int jmp2; - int r1; - static const VdbeOpList idxErr[] = { - { OP_AddImm, 1, -1, 0}, - { OP_String8, 0, 3, 0}, /* 1 */ - { OP_Rowid, 1, 4, 0}, - { OP_String8, 0, 5, 0}, /* 3 */ - { OP_String8, 0, 6, 0}, /* 4 */ - { OP_Concat, 4, 3, 3}, - { OP_Concat, 5, 3, 3}, - { OP_Concat, 6, 3, 3}, - { OP_ResultRow, 3, 1, 0}, - { OP_IfPos, 1, 0, 0}, /* 9 */ - { OP_Halt, 0, 0, 0}, - }; - r1 = sqlite3GenerateIndexKey(pParse, pIdx, 1, 3, 0); - jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, j+2, 0, r1, pIdx->nColumn+1); - addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr); - sqlite3VdbeChangeP4(v, addr+1, "rowid ", P4_STATIC); - sqlite3VdbeChangeP4(v, addr+3, " missing from index ", P4_STATIC); - sqlite3VdbeChangeP4(v, addr+4, pIdx->zName, P4_TRANSIENT); - sqlite3VdbeJumpHere(v, addr+9); - sqlite3VdbeJumpHere(v, jmp2); - } - sqlite3VdbeAddOp2(v, OP_Next, 1, loopTop+1); - sqlite3VdbeJumpHere(v, loopTop); - for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - static const VdbeOpList cntIdx[] = { - { OP_Integer, 0, 3, 0}, - { OP_Rewind, 0, 0, 0}, /* 1 */ - { OP_AddImm, 3, 1, 0}, - { OP_Next, 0, 0, 0}, /* 3 */ - { OP_Eq, 2, 0, 3}, /* 4 */ - { OP_AddImm, 1, -1, 0}, - { OP_String8, 0, 2, 0}, /* 6 */ - { OP_String8, 0, 3, 0}, /* 7 */ - { OP_Concat, 3, 2, 2}, - { OP_ResultRow, 2, 1, 0}, - }; - addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeJumpHere(v, addr); - addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx); - sqlite3VdbeChangeP1(v, addr+1, j+2); - sqlite3VdbeChangeP2(v, addr+1, addr+4); - sqlite3VdbeChangeP1(v, addr+3, j+2); - sqlite3VdbeChangeP2(v, addr+3, addr+2); - sqlite3VdbeJumpHere(v, addr+4); - sqlite3VdbeChangeP4(v, addr+6, - "wrong # of entries in index ", P4_STATIC); - sqlite3VdbeChangeP4(v, addr+7, pIdx->zName, P4_TRANSIENT); - } - } - } - addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode); - sqlite3VdbeChangeP2(v, addr, -mxErr); - sqlite3VdbeJumpHere(v, addr+1); - sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC); - }else -#endif /* SQLITE_OMIT_INTEGRITY_CHECK */ + if( p->op==TK_EXCEPT ){ + op = SRT_Except; + }else{ + assert( p->op==TK_UNION ); + op = SRT_Union; + } + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + pOffset = p->pOffset; + p->pOffset = 0; + uniondest.eDest = op; + explainSetInteger(iSub2, pParse->iNextSelectId); + rc = sqlite3Select(pParse, p, &uniondest); + testcase( rc!=SQLITE_OK ); + /* Query flattening in sqlite3Select() might refill p->pOrderBy. + ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ + sqlite3ExprListDelete(db, p->pOrderBy); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->pOrderBy = 0; + if( p->op==TK_UNION ) p->nSelectRow += pPrior->nSelectRow; + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + p->pOffset = pOffset; + p->iLimit = 0; + p->iOffset = 0; -#ifndef SQLITE_OMIT_UTF16 - /* - ** PRAGMA encoding - ** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be" - ** - ** In its first form, this pragma returns the encoding of the main - ** database. If the database is not initialized, it is initialized now. - ** - ** The second form of this pragma is a no-op if the main database file - ** has not already been initialized. In this case it sets the default - ** encoding that will be used for the main database file if a new file - ** is created. If an existing main database file is opened, then the - ** default text encoding for the existing database is used. - ** - ** In all cases new databases created using the ATTACH command are - ** created to use the same default text encoding as the main database. If - ** the main database has not been initialized and/or created when ATTACH - ** is executed, this is done before the ATTACH operation. - ** - ** In the second form this pragma sets the text encoding to be used in - ** new database files created using this database handle. It is only - ** useful if invoked immediately after the main database i - */ - if( sqlite3StrICmp(zLeft, "encoding")==0 ){ - static const struct EncName { - char *zName; - u8 enc; - } encnames[] = { - { "UTF8", SQLITE_UTF8 }, - { "UTF-8", SQLITE_UTF8 }, /* Must be element [1] */ - { "UTF-16le", SQLITE_UTF16LE }, /* Must be element [2] */ - { "UTF-16be", SQLITE_UTF16BE }, /* Must be element [3] */ - { "UTF16le", SQLITE_UTF16LE }, - { "UTF16be", SQLITE_UTF16BE }, - { "UTF-16", 0 }, /* SQLITE_UTF16NATIVE */ - { "UTF16", 0 }, /* SQLITE_UTF16NATIVE */ - { 0, 0 } - }; - const struct EncName *pEnc; - if( !zRight ){ /* "PRAGMA encoding" */ - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", SQLITE_STATIC); - sqlite3VdbeAddOp2(v, OP_String8, 0, 1); - assert( encnames[SQLITE_UTF8].enc==SQLITE_UTF8 ); - assert( encnames[SQLITE_UTF16LE].enc==SQLITE_UTF16LE ); - assert( encnames[SQLITE_UTF16BE].enc==SQLITE_UTF16BE ); - sqlite3VdbeChangeP4(v, -1, encnames[ENC(pParse->db)].zName, P4_STATIC); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); - }else{ /* "PRAGMA encoding = XXX" */ - /* Only change the value of sqlite.enc if the database handle is not - ** initialized. If the main database exists, the new sqlite.enc value - ** will be overwritten when the schema is next loaded. If it does not - ** already exists, it will be created to use the new encoding value. + /* Convert the data in the temporary table into whatever form + ** it is that we currently need. */ - if( - !(DbHasProperty(db, 0, DB_SchemaLoaded)) || - DbHasProperty(db, 0, DB_Empty) - ){ - for(pEnc=&encnames[0]; pEnc->zName; pEnc++){ - if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){ - ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE; - break; - } - } - if( !pEnc->zName ){ - sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight); + assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); + if( dest.eDest!=priorOp ){ + int iCont, iBreak, iStart; + assert( p->pEList ); + if( dest.eDest==SRT_Output ){ + Select *pFirst = p; + while( pFirst->pPrior ) pFirst = pFirst->pPrior; + generateColumnNames(pParse, 0, pFirst->pEList); } + iBreak = sqlite3VdbeMakeLabel(v); + iCont = sqlite3VdbeMakeLabel(v); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); + iStart = sqlite3VdbeCurrentAddr(v); + selectInnerLoop(pParse, p, p->pEList, unionTab, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); } + break; } - }else -#endif /* SQLITE_OMIT_UTF16 */ - -#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS - /* - ** PRAGMA [database.]schema_version - ** PRAGMA [database.]schema_version = - ** - ** PRAGMA [database.]user_version - ** PRAGMA [database.]user_version = - ** - ** The pragma's schema_version and user_version are used to set or get - ** the value of the schema-version and user-version, respectively. Both - ** the schema-version and the user-version are 32-bit signed integers - ** stored in the database header. - ** - ** The schema-cookie is usually only manipulated internally by SQLite. It - ** is incremented by SQLite whenever the database schema is modified (by - ** creating or dropping a table or index). The schema version is used by - ** SQLite each time a query is executed to ensure that the internal cache - ** of the schema used when compiling the SQL query matches the schema of - ** the database against which the compiled query is actually executed. - ** Subverting this mechanism by using "PRAGMA schema_version" to modify - ** the schema-version is potentially dangerous and may lead to program - ** crashes or database corruption. Use with caution! - ** - ** The user-version is not used internally by SQLite. It may be used by - ** applications for any purpose. - */ - if( sqlite3StrICmp(zLeft, "schema_version")==0 - || sqlite3StrICmp(zLeft, "user_version")==0 - || sqlite3StrICmp(zLeft, "freelist_count")==0 - ){ - int iCookie; /* Cookie index. 1 for schema-cookie, 6 for user-cookie. */ - sqlite3VdbeUsesBtree(v, iDb); - switch( zLeft[0] ){ - case 'f': case 'F': - iCookie = BTREE_FREE_PAGE_COUNT; - break; - case 's': case 'S': - iCookie = BTREE_SCHEMA_VERSION; - break; - default: - iCookie = BTREE_USER_VERSION; - break; - } + default: assert( p->op==TK_INTERSECT ); { + int tab1, tab2; + int iCont, iBreak, iStart; + Expr *pLimit, *pOffset; + int addr; + SelectDest intersectdest; + int r1; - if( zRight && iCookie!=BTREE_FREE_PAGE_COUNT ){ - /* Write the specified cookie value */ - static const VdbeOpList setCookie[] = { - { OP_Transaction, 0, 1, 0}, /* 0 */ - { OP_Integer, 0, 1, 0}, /* 1 */ - { OP_SetCookie, 0, 0, 1}, /* 2 */ - }; - int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie); - sqlite3VdbeChangeP1(v, addr, iDb); - sqlite3VdbeChangeP1(v, addr+1, sqlite3Atoi(zRight)); - sqlite3VdbeChangeP1(v, addr+2, iDb); - sqlite3VdbeChangeP2(v, addr+2, iCookie); - }else{ - /* Read the specified cookie value */ - static const VdbeOpList readCookie[] = { - { OP_Transaction, 0, 0, 0}, /* 0 */ - { OP_ReadCookie, 0, 1, 0}, /* 1 */ - { OP_ResultRow, 1, 1, 0} - }; - int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie); - sqlite3VdbeChangeP1(v, addr, iDb); - sqlite3VdbeChangeP1(v, addr+1, iDb); - sqlite3VdbeChangeP3(v, addr+1, iCookie); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); - } - }else -#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */ + /* INTERSECT is different from the others since it requires + ** two temporary tables. Hence it has its own case. Begin + ** by allocating the tables we will need. + */ + tab1 = pParse->nTab++; + tab2 = pParse->nTab++; + assert( p->pOrderBy==0 ); -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS - /* - ** PRAGMA compile_options - ** - ** Return the names of all compile-time options used in this build, - ** one option per row. - */ - if( sqlite3StrICmp(zLeft, "compile_options")==0 ){ - int i = 0; - const char *zOpt; - sqlite3VdbeSetNumCols(v, 1); - pParse->nMem = 1; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "compile_option", SQLITE_STATIC); - while( (zOpt = sqlite3_compileoption_get(i++))!=0 ){ - sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, zOpt, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); - } - }else -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); -#ifndef SQLITE_OMIT_WAL - /* - ** PRAGMA [database.]wal_checkpoint = passive|full|restart - ** - ** Checkpoint the database. - */ - if( sqlite3StrICmp(zLeft, "wal_checkpoint")==0 ){ - int iBt = (pId2->z?iDb:SQLITE_MAX_ATTACHED); - int eMode = SQLITE_CHECKPOINT_PASSIVE; - if( zRight ){ - if( sqlite3StrICmp(zRight, "full")==0 ){ - eMode = SQLITE_CHECKPOINT_FULL; - }else if( sqlite3StrICmp(zRight, "restart")==0 ){ - eMode = SQLITE_CHECKPOINT_RESTART; + /* Code the SELECTs to our left into temporary table "tab1". + */ + sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); + explainSetInteger(iSub1, pParse->iNextSelectId); + rc = sqlite3Select(pParse, pPrior, &intersectdest); + if( rc ){ + goto multi_select_end; } - } - if( sqlite3ReadSchema(pParse) ) goto pragma_out; - sqlite3VdbeSetNumCols(v, 3); - pParse->nMem = 3; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "busy", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "log", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "checkpointed", SQLITE_STATIC); - - sqlite3VdbeAddOp3(v, OP_Checkpoint, iBt, eMode, 1); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); - }else - - /* - ** PRAGMA wal_autocheckpoint - ** PRAGMA wal_autocheckpoint = N - ** - ** Configure a database connection to automatically checkpoint a database - ** after accumulating N frames in the log. Or query for the current value - ** of N. - */ - if( sqlite3StrICmp(zLeft, "wal_autocheckpoint")==0 ){ - if( zRight ){ - sqlite3_wal_autocheckpoint(db, sqlite3Atoi(zRight)); - } - returnSingleInt(pParse, "wal_autocheckpoint", - db->xWalCallback==sqlite3WalDefaultHook ? - SQLITE_PTR_TO_INT(db->pWalArg) : 0); - }else -#endif -#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) - /* - ** Report the current state of file logs for all databases - */ - if( sqlite3StrICmp(zLeft, "lock_status")==0 ){ - static const char *const azLockName[] = { - "unlocked", "shared", "reserved", "pending", "exclusive" - }; - int i; - sqlite3VdbeSetNumCols(v, 2); - pParse->nMem = 2; - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", SQLITE_STATIC); - sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", SQLITE_STATIC); - for(i=0; inDb; i++){ - Btree *pBt; - Pager *pPager; - const char *zState = "unknown"; - int j; - if( db->aDb[i].zName==0 ) continue; - sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, db->aDb[i].zName, P4_STATIC); - pBt = db->aDb[i].pBt; - if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){ - zState = "closed"; - }else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0, - SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){ - zState = azLockName[j]; + /* Code the current SELECT into temporary table "tab2" + */ + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); + assert( p->addrOpenEphm[1] == -1 ); + p->addrOpenEphm[1] = addr; + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + pOffset = p->pOffset; + p->pOffset = 0; + intersectdest.iSDParm = tab2; + explainSetInteger(iSub2, pParse->iNextSelectId); + rc = sqlite3Select(pParse, p, &intersectdest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + p->pOffset = pOffset; + + /* Generate code to take the intersection of the two temporary + ** tables. + */ + assert( p->pEList ); + if( dest.eDest==SRT_Output ){ + Select *pFirst = p; + while( pFirst->pPrior ) pFirst = pFirst->pPrior; + generateColumnNames(pParse, 0, pFirst->pEList); } - sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, zState, P4_STATIC); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); + iBreak = sqlite3VdbeMakeLabel(v); + iCont = sqlite3VdbeMakeLabel(v); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); + r1 = sqlite3GetTempReg(pParse); + iStart = sqlite3VdbeAddOp2(v, OP_RowKey, tab1, r1); + sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, r1); + selectInnerLoop(pParse, p, p->pEList, tab1, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); + break; } + } - }else -#endif + explainComposite(pParse, p->op, iSub1, iSub2, p->op!=TK_ALL); -#ifdef SQLITE_HAS_CODEC - if( sqlite3StrICmp(zLeft, "key")==0 && zRight ){ - sqlite3_key(db, zRight, sqlite3Strlen30(zRight)); - }else - if( sqlite3StrICmp(zLeft, "rekey")==0 && zRight ){ - sqlite3_rekey(db, zRight, sqlite3Strlen30(zRight)); - }else - if( zRight && (sqlite3StrICmp(zLeft, "hexkey")==0 || - sqlite3StrICmp(zLeft, "hexrekey")==0) ){ - int i, h1, h2; - char zKey[40]; - for(i=0; (h1 = zRight[i])!=0 && (h2 = zRight[i+1])!=0; i+=2){ - h1 += 9*(1&(h1>>6)); - h2 += 9*(1&(h2>>6)); - zKey[i/2] = (h2 & 0x0f) | ((h1 & 0xf)<<4); - } - if( (zLeft[3] & 0xf)==0xb ){ - sqlite3_key(db, zKey, i/2); - }else{ - sqlite3_rekey(db, zKey, i/2); - } - }else -#endif -#if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD) - if( sqlite3StrICmp(zLeft, "activate_extensions")==0 ){ -#ifdef SQLITE_HAS_CODEC - if( sqlite3StrNICmp(zRight, "see-", 4)==0 ){ - sqlite3_activate_see(&zRight[4]); + /* Compute collating sequences used by + ** temporary tables needed to implement the compound select. + ** Attach the KeyInfo structure to all temporary tables. + ** + ** This section is run by the right-most SELECT statement only. + ** SELECT statements to the left always skip this part. The right-most + ** SELECT might also skip this part if it has no ORDER BY clause and + ** no temp tables are required. + */ + if( p->selFlags & SF_UsesEphemeral ){ + int i; /* Loop counter */ + KeyInfo *pKeyInfo; /* Collating sequence for the result set */ + Select *pLoop; /* For looping through SELECT statements */ + CollSeq **apColl; /* For looping through pKeyInfo->aColl[] */ + int nCol; /* Number of columns in result set */ + + assert( p->pNext==0 ); + nCol = p->pEList->nExpr; + pKeyInfo = sqlite3KeyInfoAlloc(db, nCol, 1); + if( !pKeyInfo ){ + rc = SQLITE_NOMEM; + goto multi_select_end; } -#endif -#ifdef SQLITE_ENABLE_CEROD - if( sqlite3StrNICmp(zRight, "cerod-", 6)==0 ){ - sqlite3_activate_cerod(&zRight[6]); + for(i=0, apColl=pKeyInfo->aColl; ipDfltColl; + } } -#endif - }else -#endif - - - {/* Empty ELSE clause */} - /* - ** Reset the safety level, in case the fullfsync flag or synchronous - ** setting changed. - */ -#ifndef SQLITE_OMIT_PAGER_PRAGMAS - if( db->autoCommit ){ - sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level, - (db->flags&SQLITE_FullFSync)!=0, - (db->flags&SQLITE_CkptFullFSync)!=0); + for(pLoop=p; pLoop; pLoop=pLoop->pPrior){ + for(i=0; i<2; i++){ + int addr = pLoop->addrOpenEphm[i]; + if( addr<0 ){ + /* If [0] is unused then [1] is also unused. So we can + ** always safely abort as soon as the first unused slot is found */ + assert( pLoop->addrOpenEphm[1]<0 ); + break; + } + sqlite3VdbeChangeP2(v, addr, nCol); + sqlite3VdbeChangeP4(v, addr, (char*)sqlite3KeyInfoRef(pKeyInfo), + P4_KEYINFO); + pLoop->addrOpenEphm[i] = -1; + } + } + sqlite3KeyInfoUnref(pKeyInfo); } -#endif -pragma_out: - sqlite3DbFree(db, zLeft); - sqlite3DbFree(db, zRight); -} -#endif /* SQLITE_OMIT_PRAGMA */ +multi_select_end: + pDest->iSdst = dest.iSdst; + pDest->nSdst = dest.nSdst; + sqlite3SelectDelete(db, pDelete); + return rc; +} +#endif /* SQLITE_OMIT_COMPOUND_SELECT */ -/************** End of pragma.c **********************************************/ -/************** Begin file prepare.c *****************************************/ /* -** 2005 May 25 +** Code an output subroutine for a coroutine implementation of a +** SELECT statment. ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** The data to be output is contained in pIn->iSdst. There are +** pIn->nSdst columns to be output. pDest is where the output should +** be sent. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** regReturn is the number of the register holding the subroutine +** return address. ** -************************************************************************* -** This file contains the implementation of the sqlite3_prepare() -** interface, and routines that contribute to loading the database schema -** from disk. -*/ - -/* -** Fill the InitData structure with an error message that indicates -** that the database is corrupt. +** If regPrev>0 then it is the first register in a vector that +** records the previous output. mem[regPrev] is a flag that is false +** if there has been no previous output. If regPrev>0 then code is +** generated to suppress duplicates. pKeyInfo is used for comparing +** keys. +** +** If the LIMIT found in p->iLimit is reached, jump immediately to +** iBreak. */ -static void corruptSchema( - InitData *pData, /* Initialization context */ - const char *zObj, /* Object being parsed at the point of error */ - const char *zExtra /* Error information */ +static int generateOutputSubroutine( + Parse *pParse, /* Parsing context */ + Select *p, /* The SELECT statement */ + SelectDest *pIn, /* Coroutine supplying data */ + SelectDest *pDest, /* Where to send the data */ + int regReturn, /* The return address register */ + int regPrev, /* Previous result register. No uniqueness if 0 */ + KeyInfo *pKeyInfo, /* For comparing with previous entry */ + int iBreak /* Jump here if we hit the LIMIT */ ){ - sqlite3 *db = pData->db; - if( !db->mallocFailed && (db->flags & SQLITE_RecoveryMode)==0 ){ - if( zObj==0 ) zObj = "?"; - sqlite3SetString(pData->pzErrMsg, db, - "malformed database schema (%s)", zObj); - if( zExtra ){ - *pData->pzErrMsg = sqlite3MAppendf(db, *pData->pzErrMsg, - "%s - %s", *pData->pzErrMsg, zExtra); - } - } - pData->rc = db->mallocFailed ? SQLITE_NOMEM : SQLITE_CORRUPT_BKPT; -} + Vdbe *v = pParse->pVdbe; + int iContinue; + int addr; -/* -** This is the callback routine for the code that initializes the -** database. See sqlite3Init() below for additional information. -** This routine is also called from the OP_ParseSchema opcode of the VDBE. -** -** Each callback contains the following information: -** -** argv[0] = name of thing being created -** argv[1] = root page number for table or index. 0 for trigger or view. -** argv[2] = SQL text for the CREATE statement. -** -*/ -SQLITE_PRIVATE int sqlite3InitCallback(void *pInit, int argc, char **argv, char **NotUsed){ - InitData *pData = (InitData*)pInit; - sqlite3 *db = pData->db; - int iDb = pData->iDb; + addr = sqlite3VdbeCurrentAddr(v); + iContinue = sqlite3VdbeMakeLabel(v); - assert( argc==3 ); - UNUSED_PARAMETER2(NotUsed, argc); - assert( sqlite3_mutex_held(db->mutex) ); - DbClearProperty(db, iDb, DB_Empty); - if( db->mallocFailed ){ - corruptSchema(pData, argv[0], 0); - return 1; + /* Suppress duplicates for UNION, EXCEPT, and INTERSECT + */ + if( regPrev ){ + int j1, j2; + j1 = sqlite3VdbeAddOp1(v, OP_IfNot, regPrev); VdbeCoverage(v); + j2 = sqlite3VdbeAddOp4(v, OP_Compare, pIn->iSdst, regPrev+1, pIn->nSdst, + (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO); + sqlite3VdbeAddOp3(v, OP_Jump, j2+2, iContinue, j2+2); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, j1); + sqlite3VdbeAddOp3(v, OP_Copy, pIn->iSdst, regPrev+1, pIn->nSdst-1); + sqlite3VdbeAddOp2(v, OP_Integer, 1, regPrev); } + if( pParse->db->mallocFailed ) return 0; - assert( iDb>=0 && iDbnDb ); - if( argv==0 ) return 0; /* Might happen if EMPTY_RESULT_CALLBACKS are on */ - if( argv[1]==0 ){ - corruptSchema(pData, argv[0], 0); - }else if( argv[2] && argv[2][0] ){ - /* Call the parser to process a CREATE TABLE, INDEX or VIEW. - ** But because db->init.busy is set to 1, no VDBE code is generated - ** or executed. All the parser does is build the internal data - ** structures that describe the table, index, or view. + /* Suppress the first OFFSET entries if there is an OFFSET clause + */ + codeOffset(v, p->iOffset, iContinue); + + switch( pDest->eDest ){ + /* Store the result as data using a unique key. */ - int rc; - sqlite3_stmt *pStmt; - TESTONLY(int rcp); /* Return code from sqlite3_prepare() */ + case SRT_Table: + case SRT_EphemTab: { + int r1 = sqlite3GetTempReg(pParse); + int r2 = sqlite3GetTempReg(pParse); + testcase( pDest->eDest==SRT_Table ); + testcase( pDest->eDest==SRT_EphemTab ); + sqlite3VdbeAddOp3(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, r1); + sqlite3VdbeAddOp2(v, OP_NewRowid, pDest->iSDParm, r2); + sqlite3VdbeAddOp3(v, OP_Insert, pDest->iSDParm, r1, r2); + sqlite3VdbeChangeP5(v, OPFLAG_APPEND); + sqlite3ReleaseTempReg(pParse, r2); + sqlite3ReleaseTempReg(pParse, r1); + break; + } - assert( db->init.busy ); - db->init.iDb = iDb; - db->init.newTnum = sqlite3Atoi(argv[1]); - db->init.orphanTrigger = 0; - TESTONLY(rcp = ) sqlite3_prepare(db, argv[2], -1, &pStmt, 0); - rc = db->errCode; - assert( (rc&0xFF)==(rcp&0xFF) ); - db->init.iDb = 0; - if( SQLITE_OK!=rc ){ - if( db->init.orphanTrigger ){ - assert( iDb==1 ); - }else{ - pData->rc = rc; - if( rc==SQLITE_NOMEM ){ - db->mallocFailed = 1; - }else if( rc!=SQLITE_INTERRUPT && (rc&0xFF)!=SQLITE_LOCKED ){ - corruptSchema(pData, argv[0], sqlite3_errmsg(db)); - } +#ifndef SQLITE_OMIT_SUBQUERY + /* If we are creating a set for an "expr IN (SELECT ...)" construct, + ** then there should be a single item on the stack. Write this + ** item into the set table with bogus data. + */ + case SRT_Set: { + int r1; + assert( pIn->nSdst==1 ); + pDest->affSdst = + sqlite3CompareAffinity(p->pEList->a[0].pExpr, pDest->affSdst); + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, 1, r1, &pDest->affSdst,1); + sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, 1); + sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iSDParm, r1); + sqlite3ReleaseTempReg(pParse, r1); + break; + } + +#if 0 /* Never occurs on an ORDER BY query */ + /* If any row exist in the result set, record that fact and abort. + */ + case SRT_Exists: { + sqlite3VdbeAddOp2(v, OP_Integer, 1, pDest->iSDParm); + /* The LIMIT clause will terminate the loop for us */ + break; + } +#endif + + /* If this is a scalar select that is part of an expression, then + ** store the results in the appropriate memory cell and break out + ** of the scan loop. + */ + case SRT_Mem: { + assert( pIn->nSdst==1 ); + sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSDParm, 1); + /* The LIMIT clause will jump out of the loop for us */ + break; + } +#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ + + /* The results are stored in a sequence of registers + ** starting at pDest->iSdst. Then the co-routine yields. + */ + case SRT_Coroutine: { + if( pDest->iSdst==0 ){ + pDest->iSdst = sqlite3GetTempRange(pParse, pIn->nSdst); + pDest->nSdst = pIn->nSdst; } + sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSdst, pDest->nSdst); + sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); + break; } - sqlite3_finalize(pStmt); - }else if( argv[0]==0 ){ - corruptSchema(pData, 0, 0); - }else{ - /* If the SQL column is blank it means this is an index that - ** was created to be the PRIMARY KEY or to fulfill a UNIQUE - ** constraint for a CREATE TABLE. The index should have already - ** been created when we processed the CREATE TABLE. All we have - ** to do here is record the root page number for that index. + + /* If none of the above, then the result destination must be + ** SRT_Output. This routine is never called with any other + ** destination other than the ones handled above or SRT_Output. + ** + ** For SRT_Output, results are stored in a sequence of registers. + ** Then the OP_ResultRow opcode is used to cause sqlite3_step() to + ** return the next row of result. */ - Index *pIndex; - pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zName); - if( pIndex==0 ){ - /* This can occur if there exists an index on a TEMP table which - ** has the same name as another index on a permanent index. Since - ** the permanent table is hidden by the TEMP table, we can also - ** safely ignore the index on the permanent table. - */ - /* Do Nothing */; - }else if( sqlite3GetInt32(argv[1], &pIndex->tnum)==0 ){ - corruptSchema(pData, argv[0], "invalid rootpage"); + default: { + assert( pDest->eDest==SRT_Output ); + sqlite3VdbeAddOp2(v, OP_ResultRow, pIn->iSdst, pIn->nSdst); + sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst); + break; } } - return 0; + + /* Jump to the end of the loop if the LIMIT is reached. + */ + if( p->iLimit ){ + sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); VdbeCoverage(v); + } + + /* Generate the subroutine return + */ + sqlite3VdbeResolveLabel(v, iContinue); + sqlite3VdbeAddOp1(v, OP_Return, regReturn); + + return addr; } /* -** Attempt to read the database schema and initialize internal -** data structures for a single database file. The index of the -** database file is given by iDb. iDb==0 is used for the main -** database. iDb==1 should never be used. iDb>=2 is used for -** auxiliary databases. Return one of the SQLITE_ error codes to -** indicate success or failure. +** Alternative compound select code generator for cases when there +** is an ORDER BY clause. +** +** We assume a query of the following form: +** +** ORDER BY +** +** is one of UNION ALL, UNION, EXCEPT, or INTERSECT. The idea +** is to code both and with the ORDER BY clause as +** co-routines. Then run the co-routines in parallel and merge the results +** into the output. In addition to the two coroutines (called selectA and +** selectB) there are 7 subroutines: +** +** outA: Move the output of the selectA coroutine into the output +** of the compound query. +** +** outB: Move the output of the selectB coroutine into the output +** of the compound query. (Only generated for UNION and +** UNION ALL. EXCEPT and INSERTSECT never output a row that +** appears only in B.) +** +** AltB: Called when there is data from both coroutines and AB. +** +** EofA: Called when data is exhausted from selectA. +** +** EofB: Called when data is exhausted from selectB. +** +** The implementation of the latter five subroutines depend on which +** is used: +** +** +** UNION ALL UNION EXCEPT INTERSECT +** ------------- ----------------- -------------- ----------------- +** AltB: outA, nextA outA, nextA outA, nextA nextA +** +** AeqB: outA, nextA nextA nextA outA, nextA +** +** AgtB: outB, nextB outB, nextB nextB nextB +** +** EofA: outB, nextB outB, nextB halt halt +** +** EofB: outA, nextA outA, nextA outA, nextA halt +** +** In the AltB, AeqB, and AgtB subroutines, an EOF on A following nextA +** causes an immediate jump to EofA and an EOF on B following nextB causes +** an immediate jump to EofB. Within EofA and EofB, and EOF on entry or +** following nextX causes a jump to the end of the select processing. +** +** Duplicate removal in the UNION, EXCEPT, and INTERSECT cases is handled +** within the output subroutine. The regPrev register set holds the previously +** output value. A comparison is made against this value and the output +** is skipped if the next results would be the same as the previous. +** +** The implementation plan is to implement the two coroutines and seven +** subroutines first, then put the control logic at the bottom. Like this: +** +** goto Init +** coA: coroutine for left query (A) +** coB: coroutine for right query (B) +** outA: output one row of A +** outB: output one row of B (UNION and UNION ALL only) +** EofA: ... +** EofB: ... +** AltB: ... +** AeqB: ... +** AgtB: ... +** Init: initialize coroutine registers +** yield coA +** if eof(A) goto EofA +** yield coB +** if eof(B) goto EofB +** Cmpr: Compare A, B +** Jump AltB, AeqB, AgtB +** End: ... +** +** We call AltB, AeqB, AgtB, EofA, and EofB "subroutines" but they are not +** actually called using Gosub and they do not Return. EofA and EofB loop +** until all data is exhausted then jump to the "end" labe. AltB, AeqB, +** and AgtB jump to either L2 or to one of EofA or EofB. */ -static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ - int rc; - int i; - int size; - Table *pTab; - Db *pDb; - char const *azArg[4]; - int meta[5]; - InitData initData; - char const *zMasterSchema; - char const *zMasterName; - int openedTransaction = 0; +#ifndef SQLITE_OMIT_COMPOUND_SELECT +static int multiSelectOrderBy( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + int i, j; /* Loop counters */ + Select *pPrior; /* Another SELECT immediately to our left */ + Vdbe *v; /* Generate code to this VDBE */ + SelectDest destA; /* Destination for coroutine A */ + SelectDest destB; /* Destination for coroutine B */ + int regAddrA; /* Address register for select-A coroutine */ + int regAddrB; /* Address register for select-B coroutine */ + int addrSelectA; /* Address of the select-A coroutine */ + int addrSelectB; /* Address of the select-B coroutine */ + int regOutA; /* Address register for the output-A subroutine */ + int regOutB; /* Address register for the output-B subroutine */ + int addrOutA; /* Address of the output-A subroutine */ + int addrOutB = 0; /* Address of the output-B subroutine */ + int addrEofA; /* Address of the select-A-exhausted subroutine */ + int addrEofA_noB; /* Alternate addrEofA if B is uninitialized */ + int addrEofB; /* Address of the select-B-exhausted subroutine */ + int addrAltB; /* Address of the AB subroutine */ + int regLimitA; /* Limit register for select-A */ + int regLimitB; /* Limit register for select-A */ + int regPrev; /* A range of registers to hold previous output */ + int savedLimit; /* Saved value of p->iLimit */ + int savedOffset; /* Saved value of p->iOffset */ + int labelCmpr; /* Label for the start of the merge algorithm */ + int labelEnd; /* Label for the end of the overall SELECT stmt */ + int j1; /* Jump instructions that get retargetted */ + int op; /* One of TK_ALL, TK_UNION, TK_EXCEPT, TK_INTERSECT */ + KeyInfo *pKeyDup = 0; /* Comparison information for duplicate removal */ + KeyInfo *pKeyMerge; /* Comparison information for merging rows */ + sqlite3 *db; /* Database connection */ + ExprList *pOrderBy; /* The ORDER BY clause */ + int nOrderBy; /* Number of terms in the ORDER BY clause */ + int *aPermute; /* Mapping from ORDER BY terms to result set columns */ +#ifndef SQLITE_OMIT_EXPLAIN + int iSub1; /* EQP id of left-hand query */ + int iSub2; /* EQP id of right-hand query */ +#endif - /* - ** The master database table has a structure like this + assert( p->pOrderBy!=0 ); + assert( pKeyDup==0 ); /* "Managed" code needs this. Ticket #3382. */ + db = pParse->db; + v = pParse->pVdbe; + assert( v!=0 ); /* Already thrown the error if VDBE alloc failed */ + labelEnd = sqlite3VdbeMakeLabel(v); + labelCmpr = sqlite3VdbeMakeLabel(v); + + + /* Patch up the ORDER BY clause */ - static const char master_schema[] = - "CREATE TABLE sqlite_master(\n" - " type text,\n" - " name text,\n" - " tbl_name text,\n" - " rootpage integer,\n" - " sql text\n" - ")" - ; -#ifndef SQLITE_OMIT_TEMPDB - static const char temp_master_schema[] = - "CREATE TEMP TABLE sqlite_temp_master(\n" - " type text,\n" - " name text,\n" - " tbl_name text,\n" - " rootpage integer,\n" - " sql text\n" - ")" - ; -#else - #define temp_master_schema 0 -#endif + op = p->op; + pPrior = p->pPrior; + assert( pPrior->pOrderBy==0 ); + pOrderBy = p->pOrderBy; + assert( pOrderBy ); + nOrderBy = pOrderBy->nExpr; - assert( iDb>=0 && iDbnDb ); - assert( db->aDb[iDb].pSchema ); - assert( sqlite3_mutex_held(db->mutex) ); - assert( iDb==1 || sqlite3BtreeHoldsMutex(db->aDb[iDb].pBt) ); + /* For operators other than UNION ALL we have to make sure that + ** the ORDER BY clause covers every term of the result set. Add + ** terms to the ORDER BY clause as necessary. + */ + if( op!=TK_ALL ){ + for(i=1; db->mallocFailed==0 && i<=p->pEList->nExpr; i++){ + struct ExprList_item *pItem; + for(j=0, pItem=pOrderBy->a; ju.x.iOrderByCol>0 ); + if( pItem->u.x.iOrderByCol==i ) break; + } + if( j==nOrderBy ){ + Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0); + if( pNew==0 ) return SQLITE_NOMEM; + pNew->flags |= EP_IntValue; + pNew->u.iValue = i; + pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew); + if( pOrderBy ) pOrderBy->a[nOrderBy++].u.x.iOrderByCol = (u16)i; + } + } + } - /* zMasterSchema and zInitScript are set to point at the master schema - ** and initialisation script appropriate for the database being - ** initialised. zMasterName is the name of the master table. + /* Compute the comparison permutation and keyinfo that is used with + ** the permutation used to determine if the next + ** row of results comes from selectA or selectB. Also add explicit + ** collations to the ORDER BY clause terms so that when the subqueries + ** to the right and the left are evaluated, they use the correct + ** collation. */ - if( !OMIT_TEMPDB && iDb==1 ){ - zMasterSchema = temp_master_schema; + aPermute = sqlite3DbMallocRaw(db, sizeof(int)*nOrderBy); + if( aPermute ){ + struct ExprList_item *pItem; + for(i=0, pItem=pOrderBy->a; iu.x.iOrderByCol>0 + && pItem->u.x.iOrderByCol<=p->pEList->nExpr ); + aPermute[i] = pItem->u.x.iOrderByCol - 1; + } + pKeyMerge = multiSelectOrderByKeyInfo(pParse, p, 1); }else{ - zMasterSchema = master_schema; + pKeyMerge = 0; } - zMasterName = SCHEMA_TABLE(iDb); - /* Construct the schema tables. */ - azArg[0] = zMasterName; - azArg[1] = "1"; - azArg[2] = zMasterSchema; - azArg[3] = 0; - initData.db = db; - initData.iDb = iDb; - initData.rc = SQLITE_OK; - initData.pzErrMsg = pzErrMsg; - sqlite3InitCallback(&initData, 3, (char **)azArg, 0); - if( initData.rc ){ - rc = initData.rc; - goto error_out; - } - pTab = sqlite3FindTable(db, zMasterName, db->aDb[iDb].zName); - if( ALWAYS(pTab) ){ - pTab->tabFlags |= TF_Readonly; - } + /* Reattach the ORDER BY clause to the query. + */ + p->pOrderBy = pOrderBy; + pPrior->pOrderBy = sqlite3ExprListDup(pParse->db, pOrderBy, 0); - /* Create a cursor to hold the database open + /* Allocate a range of temporary registers and the KeyInfo needed + ** for the logic that removes duplicate result rows when the + ** operator is UNION, EXCEPT, or INTERSECT (but not UNION ALL). */ - pDb = &db->aDb[iDb]; - if( pDb->pBt==0 ){ - if( !OMIT_TEMPDB && ALWAYS(iDb==1) ){ - DbSetProperty(db, 1, DB_SchemaLoaded); + if( op==TK_ALL ){ + regPrev = 0; + }else{ + int nExpr = p->pEList->nExpr; + assert( nOrderBy>=nExpr || db->mallocFailed ); + regPrev = pParse->nMem+1; + pParse->nMem += nExpr+1; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regPrev); + pKeyDup = sqlite3KeyInfoAlloc(db, nExpr, 1); + if( pKeyDup ){ + assert( sqlite3KeyInfoIsWriteable(pKeyDup) ); + for(i=0; iaColl[i] = multiSelectCollSeq(pParse, p, i); + pKeyDup->aSortOrder[i] = 0; + } } - return SQLITE_OK; + } + + /* Separate the left and the right query from one another + */ + p->pPrior = 0; + pPrior->pNext = 0; + sqlite3ResolveOrderGroupBy(pParse, p, p->pOrderBy, "ORDER"); + if( pPrior->pPrior==0 ){ + sqlite3ResolveOrderGroupBy(pParse, pPrior, pPrior->pOrderBy, "ORDER"); } - /* If there is not already a read-only (or read-write) transaction opened - ** on the b-tree database, open one now. If a transaction is opened, it - ** will be closed before this function returns. */ - sqlite3BtreeEnter(pDb->pBt); - if( !sqlite3BtreeIsInReadTrans(pDb->pBt) ){ - rc = sqlite3BtreeBeginTrans(pDb->pBt, 0); - if( rc!=SQLITE_OK ){ - sqlite3SetString(pzErrMsg, db, "%s", sqlite3ErrStr(rc)); - goto initone_error_out; - } - openedTransaction = 1; + /* Compute the limit registers */ + computeLimitRegisters(pParse, p, labelEnd); + if( p->iLimit && op==TK_ALL ){ + regLimitA = ++pParse->nMem; + regLimitB = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Copy, p->iOffset ? p->iOffset+1 : p->iLimit, + regLimitA); + sqlite3VdbeAddOp2(v, OP_Copy, regLimitA, regLimitB); + }else{ + regLimitA = regLimitB = 0; } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = 0; + sqlite3ExprDelete(db, p->pOffset); + p->pOffset = 0; - /* Get the database meta information. - ** - ** Meta values are as follows: - ** meta[0] Schema cookie. Changes with each schema change. - ** meta[1] File format of schema layer. - ** meta[2] Size of the page cache. - ** meta[3] Largest rootpage (auto/incr_vacuum mode) - ** meta[4] Db text encoding. 1:UTF-8 2:UTF-16LE 3:UTF-16BE - ** meta[5] User version - ** meta[6] Incremental vacuum mode - ** meta[7] unused - ** meta[8] unused - ** meta[9] unused - ** - ** Note: The #defined SQLITE_UTF* symbols in sqliteInt.h correspond to - ** the possible values of meta[4]. + regAddrA = ++pParse->nMem; + regAddrB = ++pParse->nMem; + regOutA = ++pParse->nMem; + regOutB = ++pParse->nMem; + sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA); + sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB); + + /* Generate a coroutine to evaluate the SELECT statement to the + ** left of the compound operator - the "A" select. */ - for(i=0; ipBt, i+1, (u32 *)&meta[i]); - } - pDb->pSchema->schema_cookie = meta[BTREE_SCHEMA_VERSION-1]; + addrSelectA = sqlite3VdbeCurrentAddr(v) + 1; + j1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA); + VdbeComment((v, "left SELECT")); + pPrior->iLimit = regLimitA; + explainSetInteger(iSub1, pParse->iNextSelectId); + sqlite3Select(pParse, pPrior, &destA); + sqlite3VdbeAddOp1(v, OP_EndCoroutine, regAddrA); + sqlite3VdbeJumpHere(v, j1); - /* If opening a non-empty database, check the text encoding. For the - ** main database, set sqlite3.enc to the encoding of the main database. - ** For an attached db, it is an error if the encoding is not the same - ** as sqlite3.enc. + /* Generate a coroutine to evaluate the SELECT statement on + ** the right - the "B" select */ - if( meta[BTREE_TEXT_ENCODING-1] ){ /* text encoding */ - if( iDb==0 ){ - u8 encoding; - /* If opening the main database, set ENC(db). */ - encoding = (u8)meta[BTREE_TEXT_ENCODING-1] & 3; - if( encoding==0 ) encoding = SQLITE_UTF8; - ENC(db) = encoding; - db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 0); - }else{ - /* If opening an attached database, the encoding much match ENC(db) */ - if( meta[BTREE_TEXT_ENCODING-1]!=ENC(db) ){ - sqlite3SetString(pzErrMsg, db, "attached databases must use the same" - " text encoding as main database"); - rc = SQLITE_ERROR; - goto initone_error_out; - } - } - }else{ - DbSetProperty(db, iDb, DB_Empty); + addrSelectB = sqlite3VdbeCurrentAddr(v) + 1; + j1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrB, 0, addrSelectB); + VdbeComment((v, "right SELECT")); + savedLimit = p->iLimit; + savedOffset = p->iOffset; + p->iLimit = regLimitB; + p->iOffset = 0; + explainSetInteger(iSub2, pParse->iNextSelectId); + sqlite3Select(pParse, p, &destB); + p->iLimit = savedLimit; + p->iOffset = savedOffset; + sqlite3VdbeAddOp1(v, OP_EndCoroutine, regAddrB); + + /* Generate a subroutine that outputs the current row of the A + ** select as the next output row of the compound select. + */ + VdbeNoopComment((v, "Output routine for A")); + addrOutA = generateOutputSubroutine(pParse, + p, &destA, pDest, regOutA, + regPrev, pKeyDup, labelEnd); + + /* Generate a subroutine that outputs the current row of the B + ** select as the next output row of the compound select. + */ + if( op==TK_ALL || op==TK_UNION ){ + VdbeNoopComment((v, "Output routine for B")); + addrOutB = generateOutputSubroutine(pParse, + p, &destB, pDest, regOutB, + regPrev, pKeyDup, labelEnd); } - pDb->pSchema->enc = ENC(db); + sqlite3KeyInfoUnref(pKeyDup); - if( pDb->pSchema->cache_size==0 ){ - size = sqlite3AbsInt32(meta[BTREE_DEFAULT_CACHE_SIZE-1]); - if( size==0 ){ size = SQLITE_DEFAULT_CACHE_SIZE; } - pDb->pSchema->cache_size = size; - sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size); + /* Generate a subroutine to run when the results from select A + ** are exhausted and only data in select B remains. + */ + if( op==TK_EXCEPT || op==TK_INTERSECT ){ + addrEofA_noB = addrEofA = labelEnd; + }else{ + VdbeNoopComment((v, "eof-A subroutine")); + addrEofA = sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); + addrEofA_noB = sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, labelEnd); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEofA); + p->nSelectRow += pPrior->nSelectRow; } - /* - ** file_format==1 Version 3.0.0. - ** file_format==2 Version 3.1.3. // ALTER TABLE ADD COLUMN - ** file_format==3 Version 3.1.4. // ditto but with non-NULL defaults - ** file_format==4 Version 3.3.0. // DESC indices. Boolean constants + /* Generate a subroutine to run when the results from select B + ** are exhausted and only data in select A remains. */ - pDb->pSchema->file_format = (u8)meta[BTREE_FILE_FORMAT-1]; - if( pDb->pSchema->file_format==0 ){ - pDb->pSchema->file_format = 1; + if( op==TK_INTERSECT ){ + addrEofB = addrEofA; + if( p->nSelectRow > pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; + }else{ + VdbeNoopComment((v, "eof-B subroutine")); + addrEofB = sqlite3VdbeAddOp2(v, OP_Gosub, regOutA, addrOutA); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, labelEnd); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEofB); } - if( pDb->pSchema->file_format>SQLITE_MAX_FILE_FORMAT ){ - sqlite3SetString(pzErrMsg, db, "unsupported file format"); - rc = SQLITE_ERROR; - goto initone_error_out; + + /* Generate code to handle the case of AB */ - if( iDb==0 && meta[BTREE_FILE_FORMAT-1]>=4 ){ - db->flags &= ~SQLITE_LegacyFileFmt; + VdbeNoopComment((v, "A-gt-B subroutine")); + addrAgtB = sqlite3VdbeCurrentAddr(v); + if( op==TK_ALL || op==TK_UNION ){ + sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); } + sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, labelCmpr); - /* Read the schema information out of the schema tables + /* This code runs once to initialize everything. */ - assert( db->init.busy ); - { - char *zSql; - zSql = sqlite3MPrintf(db, - "SELECT name, rootpage, sql FROM '%q'.%s ORDER BY rowid", - db->aDb[iDb].zName, zMasterName); -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); - xAuth = db->xAuth; - db->xAuth = 0; + sqlite3VdbeJumpHere(v, j1); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, addrEofA_noB); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v); + + /* Implement the main merge loop + */ + sqlite3VdbeResolveLabel(v, labelCmpr); + sqlite3VdbeAddOp4(v, OP_Permutation, 0, 0, 0, (char*)aPermute, P4_INTARRAY); + sqlite3VdbeAddOp4(v, OP_Compare, destA.iSdst, destB.iSdst, nOrderBy, + (char*)pKeyMerge, P4_KEYINFO); + sqlite3VdbeChangeP5(v, OPFLAG_PERMUTE); + sqlite3VdbeAddOp3(v, OP_Jump, addrAltB, addrAeqB, addrAgtB); VdbeCoverage(v); + + /* Jump to the this point in order to terminate the query. + */ + sqlite3VdbeResolveLabel(v, labelEnd); + + /* Set the number of output columns + */ + if( pDest->eDest==SRT_Output ){ + Select *pFirst = pPrior; + while( pFirst->pPrior ) pFirst = pFirst->pPrior; + generateColumnNames(pParse, 0, pFirst->pEList); + } + + /* Reassembly the compound query so that it will be freed correctly + ** by the calling function */ + if( p->pPrior ){ + sqlite3SelectDelete(db, p->pPrior); + } + p->pPrior = pPrior; + pPrior->pNext = p; + + /*** TBD: Insert subroutine calls to close cursors on incomplete + **** subqueries ****/ + explainComposite(pParse, p->op, iSub1, iSub2, 0); + return SQLITE_OK; +} #endif - rc = sqlite3_exec(db, zSql, sqlite3InitCallback, &initData, 0); -#ifndef SQLITE_OMIT_AUTHORIZATION - db->xAuth = xAuth; + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) +/* Forward Declarations */ +static void substExprList(sqlite3*, ExprList*, int, ExprList*); +static void substSelect(sqlite3*, Select *, int, ExprList *); + +/* +** Scan through the expression pExpr. Replace every reference to +** a column in table number iTable with a copy of the iColumn-th +** entry in pEList. (But leave references to the ROWID column +** unchanged.) +** +** This routine is part of the flattening procedure. A subquery +** whose result set is defined by pEList appears as entry in the +** FROM clause of a SELECT such that the VDBE cursor assigned to that +** FORM clause entry is iTable. This routine make the necessary +** changes to pExpr so that it refers directly to the source table +** of the subquery rather the result set of the subquery. +*/ +static Expr *substExpr( + sqlite3 *db, /* Report malloc errors to this connection */ + Expr *pExpr, /* Expr in which substitution occurs */ + int iTable, /* Table to be substituted */ + ExprList *pEList /* Substitute expressions */ +){ + if( pExpr==0 ) return 0; + if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){ + if( pExpr->iColumn<0 ){ + pExpr->op = TK_NULL; + }else{ + Expr *pNew; + assert( pEList!=0 && pExpr->iColumnnExpr ); + assert( pExpr->pLeft==0 && pExpr->pRight==0 ); + pNew = sqlite3ExprDup(db, pEList->a[pExpr->iColumn].pExpr, 0); + sqlite3ExprDelete(db, pExpr); + pExpr = pNew; } -#endif - if( rc==SQLITE_OK ) rc = initData.rc; - sqlite3DbFree(db, zSql); -#ifndef SQLITE_OMIT_ANALYZE - if( rc==SQLITE_OK ){ - sqlite3AnalysisLoad(db, iDb); + }else{ + pExpr->pLeft = substExpr(db, pExpr->pLeft, iTable, pEList); + pExpr->pRight = substExpr(db, pExpr->pRight, iTable, pEList); + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + substSelect(db, pExpr->x.pSelect, iTable, pEList); + }else{ + substExprList(db, pExpr->x.pList, iTable, pEList); } -#endif } - if( db->mallocFailed ){ - rc = SQLITE_NOMEM; - sqlite3ResetInternalSchema(db, -1); + return pExpr; +} +static void substExprList( + sqlite3 *db, /* Report malloc errors here */ + ExprList *pList, /* List to scan and in which to make substitutes */ + int iTable, /* Table to be substituted */ + ExprList *pEList /* Substitute values */ +){ + int i; + if( pList==0 ) return; + for(i=0; inExpr; i++){ + pList->a[i].pExpr = substExpr(db, pList->a[i].pExpr, iTable, pEList); } - if( rc==SQLITE_OK || (db->flags&SQLITE_RecoveryMode)){ - /* Black magic: If the SQLITE_RecoveryMode flag is set, then consider - ** the schema loaded, even if errors occurred. In this situation the - ** current sqlite3_prepare() operation will fail, but the following one - ** will attempt to compile the supplied statement against whatever subset - ** of the schema was loaded before the error occurred. The primary - ** purpose of this is to allow access to the sqlite_master table - ** even when its contents have been corrupted. - */ - DbSetProperty(db, iDb, DB_SchemaLoaded); - rc = SQLITE_OK; +} +static void substSelect( + sqlite3 *db, /* Report malloc errors here */ + Select *p, /* SELECT statement in which to make substitutions */ + int iTable, /* Table to be replaced */ + ExprList *pEList /* Substitute values */ +){ + SrcList *pSrc; + struct SrcList_item *pItem; + int i; + if( !p ) return; + substExprList(db, p->pEList, iTable, pEList); + substExprList(db, p->pGroupBy, iTable, pEList); + substExprList(db, p->pOrderBy, iTable, pEList); + p->pHaving = substExpr(db, p->pHaving, iTable, pEList); + p->pWhere = substExpr(db, p->pWhere, iTable, pEList); + substSelect(db, p->pPrior, iTable, pEList); + pSrc = p->pSrc; + assert( pSrc ); /* Even for (SELECT 1) we have: pSrc!=0 but pSrc->nSrc==0 */ + if( ALWAYS(pSrc) ){ + for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ + substSelect(db, pItem->pSelect, iTable, pEList); + } } +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) +/* +** This routine attempts to flatten subqueries as a performance optimization. +** This routine returns 1 if it makes changes and 0 if no flattening occurs. +** +** To understand the concept of flattening, consider the following +** query: +** +** SELECT a FROM (SELECT x+y AS a FROM t1 WHERE z<100) WHERE a>5 +** +** The default way of implementing this query is to execute the +** subquery first and store the results in a temporary table, then +** run the outer query on that temporary table. This requires two +** passes over the data. Furthermore, because the temporary table +** has no indices, the WHERE clause on the outer query cannot be +** optimized. +** +** This routine attempts to rewrite queries such as the above into +** a single flat select, like this: +** +** SELECT x+y AS a FROM t1 WHERE z<100 AND a>5 +** +** The code generated for this simplification gives the same result +** but only has to scan the data once. And because indices might +** exist on the table t1, a complete scan of the data might be +** avoided. +** +** Flattening is only attempted if all of the following are true: +** +** (1) The subquery and the outer query do not both use aggregates. +** +** (2) The subquery is not an aggregate or the outer query is not a join. +** +** (3) The subquery is not the right operand of a left outer join +** (Originally ticket #306. Strengthened by ticket #3300) +** +** (4) The subquery is not DISTINCT. +** +** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT +** sub-queries that were excluded from this optimization. Restriction +** (4) has since been expanded to exclude all DISTINCT subqueries. +** +** (6) The subquery does not use aggregates or the outer query is not +** DISTINCT. +** +** (7) The subquery has a FROM clause. TODO: For subqueries without +** A FROM clause, consider adding a FROM close with the special +** table sqlite_once that consists of a single row containing a +** single NULL. +** +** (8) The subquery does not use LIMIT or the outer query is not a join. +** +** (9) The subquery does not use LIMIT or the outer query does not use +** aggregates. +** +** (**) Restriction (10) was removed from the code on 2005-02-05 but we +** accidently carried the comment forward until 2014-09-15. Original +** text: "The subquery does not use aggregates or the outer query does not +** use LIMIT." +** +** (11) The subquery and the outer query do not both have ORDER BY clauses. +** +** (**) Not implemented. Subsumed into restriction (3). Was previously +** a separate restriction deriving from ticket #350. +** +** (13) The subquery and outer query do not both use LIMIT. +** +** (14) The subquery does not use OFFSET. +** +** (15) The outer query is not part of a compound select or the +** subquery does not have a LIMIT clause. +** (See ticket #2339 and ticket [02a8e81d44]). +** +** (16) The outer query is not an aggregate or the subquery does +** not contain ORDER BY. (Ticket #2942) This used to not matter +** until we introduced the group_concat() function. +** +** (17) The sub-query is not a compound select, or it is a UNION ALL +** compound clause made up entirely of non-aggregate queries, and +** the parent query: +** +** * is not itself part of a compound select, +** * is not an aggregate or DISTINCT query, and +** * is not a join +** +** The parent and sub-query may contain WHERE clauses. Subject to +** rules (11), (13) and (14), they may also contain ORDER BY, +** LIMIT and OFFSET clauses. The subquery cannot use any compound +** operator other than UNION ALL because all the other compound +** operators have an implied DISTINCT which is disallowed by +** restriction (4). +** +** Also, each component of the sub-query must return the same number +** of result columns. This is actually a requirement for any compound +** SELECT statement, but all the code here does is make sure that no +** such (illegal) sub-query is flattened. The caller will detect the +** syntax error and return a detailed message. +** +** (18) If the sub-query is a compound select, then all terms of the +** ORDER by clause of the parent must be simple references to +** columns of the sub-query. +** +** (19) The subquery does not use LIMIT or the outer query does not +** have a WHERE clause. +** +** (20) If the sub-query is a compound select, then it must not use +** an ORDER BY clause. Ticket #3773. We could relax this constraint +** somewhat by saying that the terms of the ORDER BY clause must +** appear as unmodified result columns in the outer query. But we +** have other optimizations in mind to deal with that case. +** +** (21) The subquery does not use LIMIT or the outer query is not +** DISTINCT. (See ticket [752e1646fc]). +** +** (22) The subquery is not a recursive CTE. +** +** (23) The parent is not a recursive CTE, or the sub-query is not a +** compound query. This restriction is because transforming the +** parent to a compound query confuses the code that handles +** recursive queries in multiSelect(). +** +** (24) The subquery is not an aggregate that uses the built-in min() or +** or max() functions. (Without this restriction, a query like: +** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily +** return the value X for which Y was maximal.) +** +** +** In this routine, the "p" parameter is a pointer to the outer query. +** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query +** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates. +** +** If flattening is not attempted, this routine is a no-op and returns 0. +** If flattening is attempted this routine returns 1. +** +** All of the expression analysis must occur on both the outer query and +** the subquery before this routine runs. +*/ +static int flattenSubquery( + Parse *pParse, /* Parsing context */ + Select *p, /* The parent or outer SELECT statement */ + int iFrom, /* Index in p->pSrc->a[] of the inner subquery */ + int isAgg, /* True if outer SELECT uses aggregate functions */ + int subqueryIsAgg /* True if the subquery uses aggregate functions */ +){ + const char *zSavedAuthContext = pParse->zAuthContext; + Select *pParent; + Select *pSub; /* The inner query or "subquery" */ + Select *pSub1; /* Pointer to the rightmost select in sub-query */ + SrcList *pSrc; /* The FROM clause of the outer query */ + SrcList *pSubSrc; /* The FROM clause of the subquery */ + ExprList *pList; /* The result set of the outer query */ + int iParent; /* VDBE cursor number of the pSub result set temp table */ + int i; /* Loop counter */ + Expr *pWhere; /* The WHERE clause */ + struct SrcList_item *pSubitem; /* The subquery */ + sqlite3 *db = pParse->db; - /* Jump here for an error that occurs after successfully allocating - ** curMain and calling sqlite3BtreeEnter(). For an error that occurs - ** before that point, jump to error_out. + /* Check to see if flattening is permitted. Return 0 if not. */ -initone_error_out: - if( openedTransaction ){ - sqlite3BtreeCommit(pDb->pBt); + assert( p!=0 ); + assert( p->pPrior==0 ); /* Unable to flatten compound queries */ + if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0; + pSrc = p->pSrc; + assert( pSrc && iFrom>=0 && iFromnSrc ); + pSubitem = &pSrc->a[iFrom]; + iParent = pSubitem->iCursor; + pSub = pSubitem->pSelect; + assert( pSub!=0 ); + if( isAgg && subqueryIsAgg ) return 0; /* Restriction (1) */ + if( subqueryIsAgg && pSrc->nSrc>1 ) return 0; /* Restriction (2) */ + pSubSrc = pSub->pSrc; + assert( pSubSrc ); + /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, + ** not arbitrary expressions, we allowed some combining of LIMIT and OFFSET + ** because they could be computed at compile-time. But when LIMIT and OFFSET + ** became arbitrary expressions, we were forced to add restrictions (13) + ** and (14). */ + if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */ + if( pSub->pOffset ) return 0; /* Restriction (14) */ + if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){ + return 0; /* Restriction (15) */ } - sqlite3BtreeLeave(pDb->pBt); - -error_out: - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - db->mallocFailed = 1; + if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */ + if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (5) */ + if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){ + return 0; /* Restrictions (8)(9) */ } - return rc; -} - -/* -** Initialize all database files - the main database file, the file -** used to store temporary tables, and any additional database files -** created using ATTACH statements. Return a success code. If an -** error occurs, write an error message into *pzErrMsg. -** -** After a database is initialized, the DB_SchemaLoaded bit is set -** bit is set in the flags field of the Db structure. If the database -** file was of zero-length, then the DB_Empty flag is also set. -*/ -SQLITE_PRIVATE int sqlite3Init(sqlite3 *db, char **pzErrMsg){ - int i, rc; - int commit_internal = !(db->flags&SQLITE_InternChanges); - - assert( sqlite3_mutex_held(db->mutex) ); - rc = SQLITE_OK; - db->init.busy = 1; - for(i=0; rc==SQLITE_OK && inDb; i++){ - if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue; - rc = sqlite3InitOne(db, i, pzErrMsg); - if( rc ){ - sqlite3ResetInternalSchema(db, i); - } + if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){ + return 0; /* Restriction (6) */ } - - /* Once all the other databases have been initialised, load the schema - ** for the TEMP database. This is loaded last, as the TEMP database - ** schema may contain references to objects in other databases. - */ -#ifndef SQLITE_OMIT_TEMPDB - if( rc==SQLITE_OK && ALWAYS(db->nDb>1) - && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ - rc = sqlite3InitOne(db, 1, pzErrMsg); - if( rc ){ - sqlite3ResetInternalSchema(db, 1); - } + if( p->pOrderBy && pSub->pOrderBy ){ + return 0; /* Restriction (11) */ } -#endif - - db->init.busy = 0; - if( rc==SQLITE_OK && commit_internal ){ - sqlite3CommitInternalChanges(db); + if( isAgg && pSub->pOrderBy ) return 0; /* Restriction (16) */ + if( pSub->pLimit && p->pWhere ) return 0; /* Restriction (19) */ + if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ + return 0; /* Restriction (21) */ } - - return rc; -} - -/* -** This routine is a no-op if the database schema is already initialised. -** Otherwise, the schema is loaded. An error code is returned. -*/ -SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse){ - int rc = SQLITE_OK; - sqlite3 *db = pParse->db; - assert( sqlite3_mutex_held(db->mutex) ); - if( !db->init.busy ){ - rc = sqlite3Init(db, &pParse->zErrMsg); + testcase( pSub->selFlags & SF_Recursive ); + testcase( pSub->selFlags & SF_MinMaxAgg ); + if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){ + return 0; /* Restrictions (22) and (24) */ } - if( rc!=SQLITE_OK ){ - pParse->rc = rc; - pParse->nErr++; + if( (p->selFlags & SF_Recursive) && pSub->pPrior ){ + return 0; /* Restriction (23) */ } - return rc; -} - - -/* -** Check schema cookies in all databases. If any cookie is out -** of date set pParse->rc to SQLITE_SCHEMA. If all schema cookies -** make no changes to pParse->rc. -*/ -static void schemaIsValid(Parse *pParse){ - sqlite3 *db = pParse->db; - int iDb; - int rc; - int cookie; - assert( pParse->checkSchema ); - assert( sqlite3_mutex_held(db->mutex) ); - for(iDb=0; iDbnDb; iDb++){ - int openedTransaction = 0; /* True if a transaction is opened */ - Btree *pBt = db->aDb[iDb].pBt; /* Btree database to read cookie from */ - if( pBt==0 ) continue; + /* OBSOLETE COMMENT 1: + ** Restriction 3: If the subquery is a join, make sure the subquery is + ** not used as the right operand of an outer join. Examples of why this + ** is not allowed: + ** + ** t1 LEFT OUTER JOIN (t2 JOIN t3) + ** + ** If we flatten the above, we would get + ** + ** (t1 LEFT OUTER JOIN t2) JOIN t3 + ** + ** which is not at all the same thing. + ** + ** OBSOLETE COMMENT 2: + ** Restriction 12: If the subquery is the right operand of a left outer + ** join, make sure the subquery has no WHERE clause. + ** An examples of why this is not allowed: + ** + ** t1 LEFT OUTER JOIN (SELECT * FROM t2 WHERE t2.x>0) + ** + ** If we flatten the above, we would get + ** + ** (t1 LEFT OUTER JOIN t2) WHERE t2.x>0 + ** + ** But the t2.x>0 test will always fail on a NULL row of t2, which + ** effectively converts the OUTER JOIN into an INNER JOIN. + ** + ** THIS OVERRIDES OBSOLETE COMMENTS 1 AND 2 ABOVE: + ** Ticket #3300 shows that flattening the right term of a LEFT JOIN + ** is fraught with danger. Best to avoid the whole thing. If the + ** subquery is the right term of a LEFT JOIN, then do not flatten. + */ + if( (pSubitem->jointype & JT_OUTER)!=0 ){ + return 0; + } - /* If there is not already a read-only (or read-write) transaction opened - ** on the b-tree database, open one now. If a transaction is opened, it - ** will be closed immediately after reading the meta-value. */ - if( !sqlite3BtreeIsInReadTrans(pBt) ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - db->mallocFailed = 1; - } - if( rc!=SQLITE_OK ) return; - openedTransaction = 1; + /* Restriction 17: If the sub-query is a compound SELECT, then it must + ** use only the UNION ALL operator. And none of the simple select queries + ** that make up the compound SELECT are allowed to be aggregate or distinct + ** queries. + */ + if( pSub->pPrior ){ + if( pSub->pOrderBy ){ + return 0; /* Restriction 20 */ } - - /* Read the schema cookie from the database. If it does not match the - ** value stored as part of the in-memory schema representation, - ** set Parse.rc to SQLITE_SCHEMA. */ - sqlite3BtreeGetMeta(pBt, BTREE_SCHEMA_VERSION, (u32 *)&cookie); - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( cookie!=db->aDb[iDb].pSchema->schema_cookie ){ - sqlite3ResetInternalSchema(db, iDb); - pParse->rc = SQLITE_SCHEMA; + if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){ + return 0; + } + for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){ + testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); + testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); + assert( pSub->pSrc!=0 ); + if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 + || (pSub1->pPrior && pSub1->op!=TK_ALL) + || pSub1->pSrc->nSrc<1 + || pSub->pEList->nExpr!=pSub1->pEList->nExpr + ){ + return 0; + } + testcase( pSub1->pSrc->nSrc>1 ); } - /* Close the transaction, if one was opened. */ - if( openedTransaction ){ - sqlite3BtreeCommit(pBt); + /* Restriction 18. */ + if( p->pOrderBy ){ + int ii; + for(ii=0; iipOrderBy->nExpr; ii++){ + if( p->pOrderBy->a[ii].u.x.iOrderByCol==0 ) return 0; + } } } -} -/* -** Convert a schema pointer into the iDb index that indicates -** which database file in db->aDb[] the schema refers to. -** -** If the same database is attached more than once, the first -** attached database is returned. -*/ -SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *pSchema){ - int i = -1000000; + /***** If we reach this point, flattening is permitted. *****/ + SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n", + pSub->zSelName, pSub, iFrom)); - /* If pSchema is NULL, then return -1000000. This happens when code in - ** expr.c is trying to resolve a reference to a transient table (i.e. one - ** created by a sub-select). In this case the return value of this - ** function should never be used. + /* Authorize the subquery */ + pParse->zAuthContext = pSubitem->zName; + TESTONLY(i =) sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0); + testcase( i==SQLITE_DENY ); + pParse->zAuthContext = zSavedAuthContext; + + /* If the sub-query is a compound SELECT statement, then (by restrictions + ** 17 and 18 above) it must be a UNION ALL and the parent query must + ** be of the form: ** - ** We return -1000000 instead of the more usual -1 simply because using - ** -1000000 as the incorrect index into db->aDb[] is much - ** more likely to cause a segfault than -1 (of course there are assert() - ** statements too, but it never hurts to play the odds). + ** SELECT FROM () + ** + ** followed by any ORDER BY, LIMIT and/or OFFSET clauses. This block + ** creates N-1 copies of the parent query without any ORDER BY, LIMIT or + ** OFFSET clauses and joins them to the left-hand-side of the original + ** using UNION ALL operators. In this case N is the number of simple + ** select statements in the compound sub-query. + ** + ** Example: + ** + ** SELECT a+1 FROM ( + ** SELECT x FROM tab + ** UNION ALL + ** SELECT y FROM tab + ** UNION ALL + ** SELECT abs(z*2) FROM tab2 + ** ) WHERE a!=5 ORDER BY 1 + ** + ** Transformed into: + ** + ** SELECT x+1 FROM tab WHERE x+1!=5 + ** UNION ALL + ** SELECT y+1 FROM tab WHERE y+1!=5 + ** UNION ALL + ** SELECT abs(z*2)+1 FROM tab2 WHERE abs(z*2)+1!=5 + ** ORDER BY 1 + ** + ** We call this the "compound-subquery flattening". */ - assert( sqlite3_mutex_held(db->mutex) ); - if( pSchema ){ - for(i=0; ALWAYS(inDb); i++){ - if( db->aDb[i].pSchema==pSchema ){ - break; - } + for(pSub=pSub->pPrior; pSub; pSub=pSub->pPrior){ + Select *pNew; + ExprList *pOrderBy = p->pOrderBy; + Expr *pLimit = p->pLimit; + Expr *pOffset = p->pOffset; + Select *pPrior = p->pPrior; + p->pOrderBy = 0; + p->pSrc = 0; + p->pPrior = 0; + p->pLimit = 0; + p->pOffset = 0; + pNew = sqlite3SelectDup(db, p, 0); + sqlite3SelectSetName(pNew, pSub->zSelName); + p->pOffset = pOffset; + p->pLimit = pLimit; + p->pOrderBy = pOrderBy; + p->pSrc = pSrc; + p->op = TK_ALL; + if( pNew==0 ){ + p->pPrior = pPrior; + }else{ + pNew->pPrior = pPrior; + if( pPrior ) pPrior->pNext = pNew; + pNew->pNext = p; + p->pPrior = pNew; + SELECTTRACE(2,pParse,p, + ("compound-subquery flattener creates %s.%p as peer\n", + pNew->zSelName, pNew)); } - assert( i>=0 && inDb ); + if( db->mallocFailed ) return 1; } - return i; -} -/* -** Compile the UTF-8 encoded SQL statement zSql into a statement handle. -*/ -static int sqlite3Prepare( - sqlite3 *db, /* Database handle. */ - const char *zSql, /* UTF-8 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ - Vdbe *pReprepare, /* VM being reprepared */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const char **pzTail /* OUT: End of parsed string */ -){ - Parse *pParse; /* Parsing context */ - char *zErrMsg = 0; /* Error message */ - int rc = SQLITE_OK; /* Result code */ - int i; /* Loop counter */ + /* Begin flattening the iFrom-th entry of the FROM clause + ** in the outer query. + */ + pSub = pSub1 = pSubitem->pSelect; - /* Allocate the parsing context */ - pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); - if( pParse==0 ){ - rc = SQLITE_NOMEM; - goto end_prepare; - } - pParse->pReprepare = pReprepare; - assert( ppStmt && *ppStmt==0 ); - assert( !db->mallocFailed ); - assert( sqlite3_mutex_held(db->mutex) ); + /* Delete the transient table structure associated with the + ** subquery + */ + sqlite3DbFree(db, pSubitem->zDatabase); + sqlite3DbFree(db, pSubitem->zName); + sqlite3DbFree(db, pSubitem->zAlias); + pSubitem->zDatabase = 0; + pSubitem->zName = 0; + pSubitem->zAlias = 0; + pSubitem->pSelect = 0; - /* Check to verify that it is possible to get a read lock on all - ** database schemas. The inability to get a read lock indicates that - ** some other database connection is holding a write-lock, which in - ** turn means that the other connection has made uncommitted changes - ** to the schema. - ** - ** Were we to proceed and prepare the statement against the uncommitted - ** schema changes and if those schema changes are subsequently rolled - ** back and different changes are made in their place, then when this - ** prepared statement goes to run the schema cookie would fail to detect - ** the schema change. Disaster would follow. - ** - ** This thread is currently holding mutexes on all Btrees (because - ** of the sqlite3BtreeEnterAll() in sqlite3LockAndPrepare()) so it - ** is not possible for another thread to start a new schema change - ** while this routine is running. Hence, we do not need to hold - ** locks on the schema, we just need to make sure nobody else is - ** holding them. + /* Defer deleting the Table object associated with the + ** subquery until code generation is + ** complete, since there may still exist Expr.pTab entries that + ** refer to the subquery even after flattening. Ticket #3346. ** - ** Note that setting READ_UNCOMMITTED overrides most lock detection, - ** but it does *not* override schema lock detection, so this all still - ** works even if READ_UNCOMMITTED is set. + ** pSubitem->pTab is always non-NULL by test restrictions and tests above. */ - for(i=0; inDb; i++) { - Btree *pBt = db->aDb[i].pBt; - if( pBt ){ - assert( sqlite3BtreeHoldsMutex(pBt) ); - rc = sqlite3BtreeSchemaLocked(pBt); - if( rc ){ - const char *zDb = db->aDb[i].zName; - sqlite3Error(db, rc, "database schema is locked: %s", zDb); - testcase( db->flags & SQLITE_ReadUncommitted ); - goto end_prepare; - } + if( ALWAYS(pSubitem->pTab!=0) ){ + Table *pTabToDel = pSubitem->pTab; + if( pTabToDel->nRef==1 ){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + pTabToDel->pNextZombie = pToplevel->pZombieTab; + pToplevel->pZombieTab = pTabToDel; + }else{ + pTabToDel->nRef--; } + pSubitem->pTab = 0; } - sqlite3VtabUnlockList(db); + /* The following loop runs once for each term in a compound-subquery + ** flattening (as described above). If we are doing a different kind + ** of flattening - a flattening other than a compound-subquery flattening - + ** then this loop only runs once. + ** + ** This loop moves all of the FROM elements of the subquery into the + ** the FROM clause of the outer query. Before doing this, remember + ** the cursor number for the original outer query FROM element in + ** iParent. The iParent cursor will never be used. Subsequent code + ** will scan expressions looking for iParent references and replace + ** those references with expressions that resolve to the subquery FROM + ** elements we are now copying in. + */ + for(pParent=p; pParent; pParent=pParent->pPrior, pSub=pSub->pPrior){ + int nSubSrc; + u8 jointype = 0; + pSubSrc = pSub->pSrc; /* FROM clause of subquery */ + nSubSrc = pSubSrc->nSrc; /* Number of terms in subquery FROM clause */ + pSrc = pParent->pSrc; /* FROM clause of the outer query */ - pParse->db = db; - pParse->nQueryLoop = (double)1; - if( nBytes>=0 && (nBytes==0 || zSql[nBytes-1]!=0) ){ - char *zSqlCopy; - int mxLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH]; - testcase( nBytes==mxLen ); - testcase( nBytes==mxLen+1 ); - if( nBytes>mxLen ){ - sqlite3Error(db, SQLITE_TOOBIG, "statement too long"); - rc = sqlite3ApiExit(db, SQLITE_TOOBIG); - goto end_prepare; - } - zSqlCopy = sqlite3DbStrNDup(db, zSql, nBytes); - if( zSqlCopy ){ - sqlite3RunParser(pParse, zSqlCopy, &zErrMsg); - sqlite3DbFree(db, zSqlCopy); - pParse->zTail = &zSql[pParse->zTail-zSqlCopy]; + if( pSrc ){ + assert( pParent==p ); /* First time through the loop */ + jointype = pSubitem->jointype; }else{ - pParse->zTail = &zSql[nBytes]; + assert( pParent!=p ); /* 2nd and subsequent times through the loop */ + pSrc = pParent->pSrc = sqlite3SrcListAppend(db, 0, 0, 0); + if( pSrc==0 ){ + assert( db->mallocFailed ); + break; + } } - }else{ - sqlite3RunParser(pParse, zSql, &zErrMsg); - } - assert( 1==(int)pParse->nQueryLoop ); - if( db->mallocFailed ){ - pParse->rc = SQLITE_NOMEM; - } - if( pParse->rc==SQLITE_DONE ) pParse->rc = SQLITE_OK; - if( pParse->checkSchema ){ - schemaIsValid(pParse); - } - if( db->mallocFailed ){ - pParse->rc = SQLITE_NOMEM; - } - if( pzTail ){ - *pzTail = pParse->zTail; - } - rc = pParse->rc; + /* The subquery uses a single slot of the FROM clause of the outer + ** query. If the subquery has more than one element in its FROM clause, + ** then expand the outer query to make space for it to hold all elements + ** of the subquery. + ** + ** Example: + ** + ** SELECT * FROM tabA, (SELECT * FROM sub1, sub2), tabB; + ** + ** The outer query has 3 slots in its FROM clause. One slot of the + ** outer query (the middle slot) is used by the subquery. The next + ** block of code will expand the out query to 4 slots. The middle + ** slot is expanded to two slots in order to make space for the + ** two elements in the FROM clause of the subquery. + */ + if( nSubSrc>1 ){ + pParent->pSrc = pSrc = sqlite3SrcListEnlarge(db, pSrc, nSubSrc-1,iFrom+1); + if( db->mallocFailed ){ + break; + } + } -#ifndef SQLITE_OMIT_EXPLAIN - if( rc==SQLITE_OK && pParse->pVdbe && pParse->explain ){ - static const char * const azColName[] = { - "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment", - "selectid", "order", "from", "detail" - }; - int iFirst, mx; - if( pParse->explain==2 ){ - sqlite3VdbeSetNumCols(pParse->pVdbe, 4); - iFirst = 8; - mx = 12; + /* Transfer the FROM clause terms from the subquery into the + ** outer query. + */ + for(i=0; ia[i+iFrom].pUsing); + pSrc->a[i+iFrom] = pSubSrc->a[i]; + memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i])); + } + pSrc->a[iFrom].jointype = jointype; + + /* Now begin substituting subquery result set expressions for + ** references to the iParent in the outer query. + ** + ** Example: + ** + ** SELECT a+5, b*10 FROM (SELECT x*3 AS a, y+10 AS b FROM t1) WHERE a>b; + ** \ \_____________ subquery __________/ / + ** \_____________________ outer query ______________________________/ + ** + ** We look at every expression in the outer query and every place we see + ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10". + */ + pList = pParent->pEList; + for(i=0; inExpr; i++){ + if( pList->a[i].zName==0 ){ + char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan); + sqlite3Dequote(zName); + pList->a[i].zName = zName; + } + } + substExprList(db, pParent->pEList, iParent, pSub->pEList); + if( isAgg ){ + substExprList(db, pParent->pGroupBy, iParent, pSub->pEList); + pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList); + } + if( pSub->pOrderBy ){ + /* At this point, any non-zero iOrderByCol values indicate that the + ** ORDER BY column expression is identical to the iOrderByCol'th + ** expression returned by SELECT statement pSub. Since these values + ** do not necessarily correspond to columns in SELECT statement pParent, + ** zero them before transfering the ORDER BY clause. + ** + ** Not doing this may cause an error if a subsequent call to this + ** function attempts to flatten a compound sub-query into pParent + ** (the only way this can happen is if the compound sub-query is + ** currently part of pSub->pSrc). See ticket [d11a6e908f]. */ + ExprList *pOrderBy = pSub->pOrderBy; + for(i=0; inExpr; i++){ + pOrderBy->a[i].u.x.iOrderByCol = 0; + } + assert( pParent->pOrderBy==0 ); + assert( pSub->pPrior==0 ); + pParent->pOrderBy = pOrderBy; + pSub->pOrderBy = 0; + }else if( pParent->pOrderBy ){ + substExprList(db, pParent->pOrderBy, iParent, pSub->pEList); + } + if( pSub->pWhere ){ + pWhere = sqlite3ExprDup(db, pSub->pWhere, 0); + }else{ + pWhere = 0; + } + if( subqueryIsAgg ){ + assert( pParent->pHaving==0 ); + pParent->pHaving = pParent->pWhere; + pParent->pWhere = pWhere; + pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList); + pParent->pHaving = sqlite3ExprAnd(db, pParent->pHaving, + sqlite3ExprDup(db, pSub->pHaving, 0)); + assert( pParent->pGroupBy==0 ); + pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0); }else{ - sqlite3VdbeSetNumCols(pParse->pVdbe, 8); - iFirst = 0; - mx = 8; + pParent->pWhere = substExpr(db, pParent->pWhere, iParent, pSub->pEList); + pParent->pWhere = sqlite3ExprAnd(db, pParent->pWhere, pWhere); } - for(i=iFirst; ipVdbe, i-iFirst, COLNAME_NAME, - azColName[i], SQLITE_STATIC); + + /* The flattened query is distinct if either the inner or the + ** outer query is distinct. + */ + pParent->selFlags |= pSub->selFlags & SF_Distinct; + + /* + ** SELECT ... FROM (SELECT ... LIMIT a OFFSET b) LIMIT x OFFSET y; + ** + ** One is tempted to try to add a and b to combine the limits. But this + ** does not work if either limit is negative. + */ + if( pSub->pLimit ){ + pParent->pLimit = pSub->pLimit; + pSub->pLimit = 0; } } -#endif - assert( db->init.busy==0 || saveSqlFlag==0 ); - if( db->init.busy==0 ){ - Vdbe *pVdbe = pParse->pVdbe; - sqlite3VdbeSetSql(pVdbe, zSql, (int)(pParse->zTail-zSql), saveSqlFlag); - } - if( pParse->pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){ - sqlite3VdbeFinalize(pParse->pVdbe); - assert(!(*ppStmt)); - }else{ - *ppStmt = (sqlite3_stmt*)pParse->pVdbe; - } + /* Finially, delete what is left of the subquery and return + ** success. + */ + sqlite3SelectDelete(db, pSub1); - if( zErrMsg ){ - sqlite3Error(db, rc, "%s", zErrMsg); - sqlite3DbFree(db, zErrMsg); - }else{ - sqlite3Error(db, rc, 0); +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + sqlite3DebugPrintf("After flattening:\n"); + sqlite3TreeViewSelect(0, p, 0); } +#endif - /* Delete any TriggerPrg structures allocated while parsing this statement. */ - while( pParse->pTriggerPrg ){ - TriggerPrg *pT = pParse->pTriggerPrg; - pParse->pTriggerPrg = pT->pNext; - sqlite3DbFree(db, pT); - } + return 1; +} +#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ -end_prepare: +/* +** Based on the contents of the AggInfo structure indicated by the first +** argument, this function checks if the following are true: +** +** * the query contains just a single aggregate function, +** * the aggregate function is either min() or max(), and +** * the argument to the aggregate function is a column value. +** +** If all of the above are true, then WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX +** is returned as appropriate. Also, *ppMinMax is set to point to the +** list of arguments passed to the aggregate before returning. +** +** Or, if the conditions above are not met, *ppMinMax is set to 0 and +** WHERE_ORDERBY_NORMAL is returned. +*/ +static u8 minMaxQuery(AggInfo *pAggInfo, ExprList **ppMinMax){ + int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ - sqlite3StackFree(db, pParse); - rc = sqlite3ApiExit(db, rc); - assert( (rc&db->errMask)==rc ); - return rc; -} -static int sqlite3LockAndPrepare( - sqlite3 *db, /* Database handle. */ - const char *zSql, /* UTF-8 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ - Vdbe *pOld, /* VM being reprepared */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const char **pzTail /* OUT: End of parsed string */ -){ - int rc; - assert( ppStmt!=0 ); - *ppStmt = 0; - if( !sqlite3SafetyCheckOk(db) ){ - return SQLITE_MISUSE_BKPT; - } - sqlite3_mutex_enter(db->mutex); - sqlite3BtreeEnterAll(db); - rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); - if( rc==SQLITE_SCHEMA ){ - sqlite3_finalize(*ppStmt); - rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); + *ppMinMax = 0; + if( pAggInfo->nFunc==1 ){ + Expr *pExpr = pAggInfo->aFunc[0].pExpr; /* Aggregate function */ + ExprList *pEList = pExpr->x.pList; /* Arguments to agg function */ + + assert( pExpr->op==TK_AGG_FUNCTION ); + if( pEList && pEList->nExpr==1 && pEList->a[0].pExpr->op==TK_AGG_COLUMN ){ + const char *zFunc = pExpr->u.zToken; + if( sqlite3StrICmp(zFunc, "min")==0 ){ + eRet = WHERE_ORDERBY_MIN; + *ppMinMax = pEList; + }else if( sqlite3StrICmp(zFunc, "max")==0 ){ + eRet = WHERE_ORDERBY_MAX; + *ppMinMax = pEList; + } + } } - sqlite3BtreeLeaveAll(db); - sqlite3_mutex_leave(db->mutex); - return rc; + + assert( *ppMinMax==0 || (*ppMinMax)->nExpr==1 ); + return eRet; } /* -** Rerun the compilation of a statement after a schema change. +** The select statement passed as the first argument is an aggregate query. +** The second argument is the associated aggregate-info object. This +** function tests if the SELECT is of the form: ** -** If the statement is successfully recompiled, return SQLITE_OK. Otherwise, -** if the statement cannot be recompiled because another connection has -** locked the sqlite3_master table, return SQLITE_LOCKED. If any other error -** occurs, return SQLITE_SCHEMA. +** SELECT count(*) FROM +** +** where table is a database table, not a sub-select or view. If the query +** does match this pattern, then a pointer to the Table object representing +** is returned. Otherwise, 0 is returned. */ -SQLITE_PRIVATE int sqlite3Reprepare(Vdbe *p){ - int rc; - sqlite3_stmt *pNew; - const char *zSql; - sqlite3 *db; +static Table *isSimpleCount(Select *p, AggInfo *pAggInfo){ + Table *pTab; + Expr *pExpr; - assert( sqlite3_mutex_held(sqlite3VdbeDb(p)->mutex) ); - zSql = sqlite3_sql((sqlite3_stmt *)p); - assert( zSql!=0 ); /* Reprepare only called for prepare_v2() statements */ - db = sqlite3VdbeDb(p); - assert( sqlite3_mutex_held(db->mutex) ); - rc = sqlite3LockAndPrepare(db, zSql, -1, 0, p, &pNew, 0); - if( rc ){ - if( rc==SQLITE_NOMEM ){ - db->mallocFailed = 1; + assert( !p->pGroupBy ); + + if( p->pWhere || p->pEList->nExpr!=1 + || p->pSrc->nSrc!=1 || p->pSrc->a[0].pSelect + ){ + return 0; + } + pTab = p->pSrc->a[0].pTab; + pExpr = p->pEList->a[0].pExpr; + assert( pTab && !pTab->pSelect && pExpr ); + + if( IsVirtual(pTab) ) return 0; + if( pExpr->op!=TK_AGG_FUNCTION ) return 0; + if( NEVER(pAggInfo->nFunc==0) ) return 0; + if( (pAggInfo->aFunc[0].pFunc->funcFlags&SQLITE_FUNC_COUNT)==0 ) return 0; + if( pExpr->flags&EP_Distinct ) return 0; + + return pTab; +} + +/* +** If the source-list item passed as an argument was augmented with an +** INDEXED BY clause, then try to locate the specified index. If there +** was such a clause and the named index cannot be found, return +** SQLITE_ERROR and leave an error in pParse. Otherwise, populate +** pFrom->pIndex and return SQLITE_OK. +*/ +SQLITE_PRIVATE int sqlite3IndexedByLookup(Parse *pParse, struct SrcList_item *pFrom){ + if( pFrom->pTab && pFrom->zIndex ){ + Table *pTab = pFrom->pTab; + char *zIndex = pFrom->zIndex; + Index *pIdx; + for(pIdx=pTab->pIndex; + pIdx && sqlite3StrICmp(pIdx->zName, zIndex); + pIdx=pIdx->pNext + ); + if( !pIdx ){ + sqlite3ErrorMsg(pParse, "no such index: %s", zIndex, 0); + pParse->checkSchema = 1; + return SQLITE_ERROR; } - assert( pNew==0 ); - return rc; - }else{ - assert( pNew!=0 ); + pFrom->pIndex = pIdx; } - sqlite3VdbeSwap((Vdbe*)pNew, p); - sqlite3TransferBindings(pNew, (sqlite3_stmt*)p); - sqlite3VdbeResetStepResult((Vdbe*)pNew); - sqlite3VdbeFinalize((Vdbe*)pNew); return SQLITE_OK; } +/* +** Detect compound SELECT statements that use an ORDER BY clause with +** an alternative collating sequence. +** +** SELECT ... FROM t1 EXCEPT SELECT ... FROM t2 ORDER BY .. COLLATE ... +** +** These are rewritten as a subquery: +** +** SELECT * FROM (SELECT ... FROM t1 EXCEPT SELECT ... FROM t2) +** ORDER BY ... COLLATE ... +** +** This transformation is necessary because the multiSelectOrderBy() routine +** above that generates the code for a compound SELECT with an ORDER BY clause +** uses a merge algorithm that requires the same collating sequence on the +** result columns as on the ORDER BY clause. See ticket +** http://www.sqlite.org/src/info/6709574d2a +** +** This transformation is only needed for EXCEPT, INTERSECT, and UNION. +** The UNION ALL operator works fine with multiSelectOrderBy() even when +** there are COLLATE terms in the ORDER BY. +*/ +static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){ + int i; + Select *pNew; + Select *pX; + sqlite3 *db; + struct ExprList_item *a; + SrcList *pNewSrc; + Parse *pParse; + Token dummy; + + if( p->pPrior==0 ) return WRC_Continue; + if( p->pOrderBy==0 ) return WRC_Continue; + for(pX=p; pX && (pX->op==TK_ALL || pX->op==TK_SELECT); pX=pX->pPrior){} + if( pX==0 ) return WRC_Continue; + a = p->pOrderBy->a; + for(i=p->pOrderBy->nExpr-1; i>=0; i--){ + if( a[i].pExpr->flags & EP_Collate ) break; + } + if( i<0 ) return WRC_Continue; + + /* If we reach this point, that means the transformation is required. */ + pParse = pWalker->pParse; + db = pParse->db; + pNew = sqlite3DbMallocZero(db, sizeof(*pNew) ); + if( pNew==0 ) return WRC_Abort; + memset(&dummy, 0, sizeof(dummy)); + pNewSrc = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&dummy,pNew,0,0); + if( pNewSrc==0 ) return WRC_Abort; + *pNew = *p; + p->pSrc = pNewSrc; + p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ALL, 0)); + p->op = TK_SELECT; + p->pWhere = 0; + pNew->pGroupBy = 0; + pNew->pHaving = 0; + pNew->pOrderBy = 0; + p->pPrior = 0; + p->pNext = 0; + p->selFlags &= ~SF_Compound; + assert( pNew->pPrior!=0 ); + pNew->pPrior->pNext = pNew; + pNew->pLimit = 0; + pNew->pOffset = 0; + return WRC_Continue; +} +#ifndef SQLITE_OMIT_CTE /* -** Two versions of the official API. Legacy and new use. In the legacy -** version, the original SQL text is not saved in the prepared statement -** and so if a schema change occurs, SQLITE_SCHEMA is returned by -** sqlite3_step(). In the new version, the original SQL text is retained -** and the statement is automatically recompiled if an schema change -** occurs. +** Argument pWith (which may be NULL) points to a linked list of nested +** WITH contexts, from inner to outermost. If the table identified by +** FROM clause element pItem is really a common-table-expression (CTE) +** then return a pointer to the CTE definition for that table. Otherwise +** return NULL. +** +** If a non-NULL value is returned, set *ppContext to point to the With +** object that the returned CTE belongs to. */ -SQLITE_API int sqlite3_prepare( - sqlite3 *db, /* Database handle. */ - const char *zSql, /* UTF-8 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const char **pzTail /* OUT: End of parsed string */ +static struct Cte *searchWith( + With *pWith, /* Current outermost WITH clause */ + struct SrcList_item *pItem, /* FROM clause element to resolve */ + With **ppContext /* OUT: WITH clause return value belongs to */ ){ - int rc; - rc = sqlite3LockAndPrepare(db,zSql,nBytes,0,0,ppStmt,pzTail); - assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ - return rc; -} -SQLITE_API int sqlite3_prepare_v2( - sqlite3 *db, /* Database handle. */ - const char *zSql, /* UTF-8 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const char **pzTail /* OUT: End of parsed string */ -){ - int rc; - rc = sqlite3LockAndPrepare(db,zSql,nBytes,1,0,ppStmt,pzTail); - assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ - return rc; + const char *zName; + if( pItem->zDatabase==0 && (zName = pItem->zName)!=0 ){ + With *p; + for(p=pWith; p; p=p->pOuter){ + int i; + for(i=0; inCte; i++){ + if( sqlite3StrICmp(zName, p->a[i].zName)==0 ){ + *ppContext = p; + return &p->a[i]; + } + } + } + } + return 0; } +/* The code generator maintains a stack of active WITH clauses +** with the inner-most WITH clause being at the top of the stack. +** +** This routine pushes the WITH clause passed as the second argument +** onto the top of the stack. If argument bFree is true, then this +** WITH clause will never be popped from the stack. In this case it +** should be freed along with the Parse object. In other cases, when +** bFree==0, the With object will be freed along with the SELECT +** statement with which it is associated. +*/ +SQLITE_PRIVATE void sqlite3WithPush(Parse *pParse, With *pWith, u8 bFree){ + assert( bFree==0 || pParse->pWith==0 ); + if( pWith ){ + pWith->pOuter = pParse->pWith; + pParse->pWith = pWith; + pParse->bFreeWith = bFree; + } +} -#ifndef SQLITE_OMIT_UTF16 /* -** Compile the UTF-16 encoded SQL statement zSql into a statement handle. +** This function checks if argument pFrom refers to a CTE declared by +** a WITH clause on the stack currently maintained by the parser. And, +** if currently processing a CTE expression, if it is a recursive +** reference to the current CTE. +** +** If pFrom falls into either of the two categories above, pFrom->pTab +** and other fields are populated accordingly. The caller should check +** (pFrom->pTab!=0) to determine whether or not a successful match +** was found. +** +** Whether or not a match is found, SQLITE_OK is returned if no error +** occurs. If an error does occur, an error message is stored in the +** parser and some error code other than SQLITE_OK returned. */ -static int sqlite3Prepare16( - sqlite3 *db, /* Database handle. */ - const void *zSql, /* UTF-16 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to save SQL text into the sqlite3_stmt */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const void **pzTail /* OUT: End of parsed string */ +static int withExpand( + Walker *pWalker, + struct SrcList_item *pFrom ){ - /* This function currently works by first transforming the UTF-16 - ** encoded string to UTF-8, then invoking sqlite3_prepare(). The - ** tricky bit is figuring out the pointer to return in *pzTail. - */ - char *zSql8; - const char *zTail8 = 0; - int rc = SQLITE_OK; + Parse *pParse = pWalker->pParse; + sqlite3 *db = pParse->db; + struct Cte *pCte; /* Matched CTE (or NULL if no match) */ + With *pWith; /* WITH clause that pCte belongs to */ - assert( ppStmt ); - *ppStmt = 0; - if( !sqlite3SafetyCheckOk(db) ){ - return SQLITE_MISUSE_BKPT; - } - sqlite3_mutex_enter(db->mutex); - zSql8 = sqlite3Utf16to8(db, zSql, nBytes, SQLITE_UTF16NATIVE); - if( zSql8 ){ - rc = sqlite3LockAndPrepare(db, zSql8, -1, saveSqlFlag, 0, ppStmt, &zTail8); - } + assert( pFrom->pTab==0 ); - if( zTail8 && pzTail ){ - /* If sqlite3_prepare returns a tail pointer, we calculate the - ** equivalent pointer into the UTF-16 string by counting the unicode - ** characters between zSql8 and zTail8, and then returning a pointer - ** the same number of characters into the UTF-16 string. - */ - int chars_parsed = sqlite3Utf8CharLen(zSql8, (int)(zTail8-zSql8)); - *pzTail = (u8 *)zSql + sqlite3Utf16ByteLen(zSql, chars_parsed); + pCte = searchWith(pParse->pWith, pFrom, &pWith); + if( pCte ){ + Table *pTab; + ExprList *pEList; + Select *pSel; + Select *pLeft; /* Left-most SELECT statement */ + int bMayRecursive; /* True if compound joined by UNION [ALL] */ + With *pSavedWith; /* Initial value of pParse->pWith */ + + /* If pCte->zErr is non-NULL at this point, then this is an illegal + ** recursive reference to CTE pCte. Leave an error in pParse and return + ** early. If pCte->zErr is NULL, then this is not a recursive reference. + ** In this case, proceed. */ + if( pCte->zErr ){ + sqlite3ErrorMsg(pParse, pCte->zErr, pCte->zName); + return SQLITE_ERROR; + } + + assert( pFrom->pTab==0 ); + pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); + if( pTab==0 ) return WRC_Abort; + pTab->nRef = 1; + pTab->zName = sqlite3DbStrDup(db, pCte->zName); + pTab->iPKey = -1; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + pTab->tabFlags |= TF_Ephemeral; + pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0); + if( db->mallocFailed ) return SQLITE_NOMEM; + assert( pFrom->pSelect ); + + /* Check if this is a recursive CTE. */ + pSel = pFrom->pSelect; + bMayRecursive = ( pSel->op==TK_ALL || pSel->op==TK_UNION ); + if( bMayRecursive ){ + int i; + SrcList *pSrc = pFrom->pSelect->pSrc; + for(i=0; inSrc; i++){ + struct SrcList_item *pItem = &pSrc->a[i]; + if( pItem->zDatabase==0 + && pItem->zName!=0 + && 0==sqlite3StrICmp(pItem->zName, pCte->zName) + ){ + pItem->pTab = pTab; + pItem->isRecursive = 1; + pTab->nRef++; + pSel->selFlags |= SF_Recursive; + } + } + } + + /* Only one recursive reference is permitted. */ + if( pTab->nRef>2 ){ + sqlite3ErrorMsg( + pParse, "multiple references to recursive table: %s", pCte->zName + ); + return SQLITE_ERROR; + } + assert( pTab->nRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nRef==2 )); + + pCte->zErr = "circular reference: %s"; + pSavedWith = pParse->pWith; + pParse->pWith = pWith; + sqlite3WalkSelect(pWalker, bMayRecursive ? pSel->pPrior : pSel); + + for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior); + pEList = pLeft->pEList; + if( pCte->pCols ){ + if( pEList->nExpr!=pCte->pCols->nExpr ){ + sqlite3ErrorMsg(pParse, "table %s has %d values for %d columns", + pCte->zName, pEList->nExpr, pCte->pCols->nExpr + ); + pParse->pWith = pSavedWith; + return SQLITE_ERROR; + } + pEList = pCte->pCols; + } + + selectColumnsFromExprList(pParse, pEList, &pTab->nCol, &pTab->aCol); + if( bMayRecursive ){ + if( pSel->selFlags & SF_Recursive ){ + pCte->zErr = "multiple recursive references: %s"; + }else{ + pCte->zErr = "recursive reference in a subquery: %s"; + } + sqlite3WalkSelect(pWalker, pSel); + } + pCte->zErr = 0; + pParse->pWith = pSavedWith; } - sqlite3DbFree(db, zSql8); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + + return SQLITE_OK; } +#endif +#ifndef SQLITE_OMIT_CTE /* -** Two versions of the official API. Legacy and new use. In the legacy -** version, the original SQL text is not saved in the prepared statement -** and so if a schema change occurs, SQLITE_SCHEMA is returned by -** sqlite3_step(). In the new version, the original SQL text is retained -** and the statement is automatically recompiled if an schema change -** occurs. +** If the SELECT passed as the second argument has an associated WITH +** clause, pop it from the stack stored as part of the Parse object. +** +** This function is used as the xSelectCallback2() callback by +** sqlite3SelectExpand() when walking a SELECT tree to resolve table +** names and other FROM clause elements. */ -SQLITE_API int sqlite3_prepare16( - sqlite3 *db, /* Database handle. */ - const void *zSql, /* UTF-16 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const void **pzTail /* OUT: End of parsed string */ -){ - int rc; - rc = sqlite3Prepare16(db,zSql,nBytes,0,ppStmt,pzTail); - assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ - return rc; -} -SQLITE_API int sqlite3_prepare16_v2( - sqlite3 *db, /* Database handle. */ - const void *zSql, /* UTF-16 encoded SQL statement. */ - int nBytes, /* Length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ - const void **pzTail /* OUT: End of parsed string */ -){ - int rc; - rc = sqlite3Prepare16(db,zSql,nBytes,1,ppStmt,pzTail); - assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ - return rc; +static void selectPopWith(Walker *pWalker, Select *p){ + Parse *pParse = pWalker->pParse; + With *pWith = findRightmost(p)->pWith; + if( pWith!=0 ){ + assert( pParse->pWith==pWith ); + pParse->pWith = pWith->pOuter; + } } +#else +#define selectPopWith 0 +#endif -#endif /* SQLITE_OMIT_UTF16 */ - -/************** End of prepare.c *********************************************/ -/************** Begin file select.c ******************************************/ /* -** 2001 September 15 +** This routine is a Walker callback for "expanding" a SELECT statement. +** "Expanding" means to do the following: ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** (1) Make sure VDBE cursor numbers have been assigned to every +** element of the FROM clause. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** (2) Fill in the pTabList->a[].pTab fields in the SrcList that +** defines FROM clause. When views appear in the FROM clause, +** fill pTabList->a[].pSelect with a copy of the SELECT statement +** that implements the view. A copy is made of the view's SELECT +** statement so that we can freely modify or delete that statement +** without worrying about messing up the persistent representation +** of the view. +** +** (3) Add terms to the WHERE clause to accommodate the NATURAL keyword +** on joins and the ON and USING clause of joins. +** +** (4) Scan the list of columns in the result set (pEList) looking +** for instances of the "*" operator or the TABLE.* operator. +** If found, expand each "*" to be every column in every table +** and TABLE.* to be every column in TABLE. ** -************************************************************************* -** This file contains C code routines that are called by the parser -** to handle SELECT statements in SQLite. */ +static int selectExpander(Walker *pWalker, Select *p){ + Parse *pParse = pWalker->pParse; + int i, j, k; + SrcList *pTabList; + ExprList *pEList; + struct SrcList_item *pFrom; + sqlite3 *db = pParse->db; + Expr *pE, *pRight, *pExpr; + u16 selFlags = p->selFlags; + + p->selFlags |= SF_Expanded; + if( db->mallocFailed ){ + return WRC_Abort; + } + if( NEVER(p->pSrc==0) || (selFlags & SF_Expanded)!=0 ){ + return WRC_Prune; + } + pTabList = p->pSrc; + pEList = p->pEList; + sqlite3WithPush(pParse, findRightmost(p)->pWith, 0); + /* Make sure cursor numbers have been assigned to all entries in + ** the FROM clause of the SELECT statement. + */ + sqlite3SrcListAssignCursors(pParse, pTabList); -/* -** Delete all the content of a Select structure but do not deallocate -** the select structure itself. -*/ -static void clearSelect(sqlite3 *db, Select *p){ - sqlite3ExprListDelete(db, p->pEList); - sqlite3SrcListDelete(db, p->pSrc); - sqlite3ExprDelete(db, p->pWhere); - sqlite3ExprListDelete(db, p->pGroupBy); - sqlite3ExprDelete(db, p->pHaving); - sqlite3ExprListDelete(db, p->pOrderBy); - sqlite3SelectDelete(db, p->pPrior); - sqlite3ExprDelete(db, p->pLimit); - sqlite3ExprDelete(db, p->pOffset); -} + /* Look up every table named in the FROM clause of the select. If + ** an entry of the FROM clause is a subquery instead of a table or view, + ** then create a transient table structure to describe the subquery. + */ + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab; + assert( pFrom->isRecursive==0 || pFrom->pTab ); + if( pFrom->isRecursive ) continue; + if( pFrom->pTab!=0 ){ + /* This statement has already been prepared. There is no need + ** to go further. */ + assert( i==0 ); +#ifndef SQLITE_OMIT_CTE + selectPopWith(pWalker, p); +#endif + return WRC_Prune; + } +#ifndef SQLITE_OMIT_CTE + if( withExpand(pWalker, pFrom) ) return WRC_Abort; + if( pFrom->pTab ) {} else +#endif + if( pFrom->zName==0 ){ +#ifndef SQLITE_OMIT_SUBQUERY + Select *pSel = pFrom->pSelect; + /* A sub-query in the FROM clause of a SELECT */ + assert( pSel!=0 ); + assert( pFrom->pTab==0 ); + sqlite3WalkSelect(pWalker, pSel); + pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); + if( pTab==0 ) return WRC_Abort; + pTab->nRef = 1; + pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab); + while( pSel->pPrior ){ pSel = pSel->pPrior; } + selectColumnsFromExprList(pParse, pSel->pEList, &pTab->nCol, &pTab->aCol); + pTab->iPKey = -1; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + pTab->tabFlags |= TF_Ephemeral; +#endif + }else{ + /* An ordinary table or view name in the FROM clause */ + assert( pFrom->pTab==0 ); + pFrom->pTab = pTab = sqlite3LocateTableItem(pParse, 0, pFrom); + if( pTab==0 ) return WRC_Abort; + if( pTab->nRef==0xffff ){ + sqlite3ErrorMsg(pParse, "too many references to \"%s\": max 65535", + pTab->zName); + pFrom->pTab = 0; + return WRC_Abort; + } + pTab->nRef++; +#if !defined(SQLITE_OMIT_VIEW) || !defined (SQLITE_OMIT_VIRTUALTABLE) + if( pTab->pSelect || IsVirtual(pTab) ){ + /* We reach here if the named table is a really a view */ + if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort; + assert( pFrom->pSelect==0 ); + pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0); + sqlite3SelectSetName(pFrom->pSelect, pTab->zName); + sqlite3WalkSelect(pWalker, pFrom->pSelect); + } +#endif + } + + /* Locate the index named by the INDEXED BY clause, if any. */ + if( sqlite3IndexedByLookup(pParse, pFrom) ){ + return WRC_Abort; + } + } + + /* Process NATURAL keywords, and ON and USING clauses of joins. + */ + if( db->mallocFailed || sqliteProcessJoin(pParse, p) ){ + return WRC_Abort; + } + + /* For every "*" that occurs in the column list, insert the names of + ** all columns in all tables. And for every TABLE.* insert the names + ** of all columns in TABLE. The parser inserted a special expression + ** with the TK_ALL operator for each "*" that it found in the column list. + ** The following code just has to locate the TK_ALL expressions and expand + ** each one to the list of all columns in all tables. + ** + ** The first loop just checks to see if there are any "*" operators + ** that need expanding. + */ + for(k=0; knExpr; k++){ + pE = pEList->a[k].pExpr; + if( pE->op==TK_ALL ) break; + assert( pE->op!=TK_DOT || pE->pRight!=0 ); + assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) ); + if( pE->op==TK_DOT && pE->pRight->op==TK_ALL ) break; + } + if( knExpr ){ + /* + ** If we get here it means the result set contains one or more "*" + ** operators that need to be expanded. Loop through each expression + ** in the result set and expand them one by one. + */ + struct ExprList_item *a = pEList->a; + ExprList *pNew = 0; + int flags = pParse->db->flags; + int longNames = (flags & SQLITE_FullColNames)!=0 + && (flags & SQLITE_ShortColNames)==0; + + /* When processing FROM-clause subqueries, it is always the case + ** that full_column_names=OFF and short_column_names=ON. The + ** sqlite3ResultSetOfSelect() routine makes it so. */ + assert( (p->selFlags & SF_NestedFrom)==0 + || ((flags & SQLITE_FullColNames)==0 && + (flags & SQLITE_ShortColNames)!=0) ); + + for(k=0; knExpr; k++){ + pE = a[k].pExpr; + pRight = pE->pRight; + assert( pE->op!=TK_DOT || pRight!=0 ); + if( pE->op!=TK_ALL && (pE->op!=TK_DOT || pRight->op!=TK_ALL) ){ + /* This particular expression does not need to be expanded. + */ + pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr); + if( pNew ){ + pNew->a[pNew->nExpr-1].zName = a[k].zName; + pNew->a[pNew->nExpr-1].zSpan = a[k].zSpan; + a[k].zName = 0; + a[k].zSpan = 0; + } + a[k].pExpr = 0; + }else{ + /* This expression is a "*" or a "TABLE.*" and needs to be + ** expanded. */ + int tableSeen = 0; /* Set to 1 when TABLE matches */ + char *zTName = 0; /* text of name of TABLE */ + if( pE->op==TK_DOT ){ + assert( pE->pLeft!=0 ); + assert( !ExprHasProperty(pE->pLeft, EP_IntValue) ); + zTName = pE->pLeft->u.zToken; + } + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab = pFrom->pTab; + Select *pSub = pFrom->pSelect; + char *zTabName = pFrom->zAlias; + const char *zSchemaName = 0; + int iDb; + if( zTabName==0 ){ + zTabName = pTab->zName; + } + if( db->mallocFailed ) break; + if( pSub==0 || (pSub->selFlags & SF_NestedFrom)==0 ){ + pSub = 0; + if( zTName && sqlite3StrICmp(zTName, zTabName)!=0 ){ + continue; + } + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + zSchemaName = iDb>=0 ? db->aDb[iDb].zName : "*"; + } + for(j=0; jnCol; j++){ + char *zName = pTab->aCol[j].zName; + char *zColname; /* The computed column name */ + char *zToFree; /* Malloced string that needs to be freed */ + Token sColname; /* Computed column name as a token */ -/* -** Initialize a SelectDest structure. -*/ -SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){ - pDest->eDest = (u8)eDest; - pDest->iParm = iParm; - pDest->affinity = 0; - pDest->iMem = 0; - pDest->nMem = 0; -} + assert( zName ); + if( zTName && pSub + && sqlite3MatchSpanName(pSub->pEList->a[j].zSpan, 0, zTName, 0)==0 + ){ + continue; + } + /* If a column is marked as 'hidden' (currently only possible + ** for virtual tables), do not include it in the expanded + ** result-set list. + */ + if( IsHiddenColumn(&pTab->aCol[j]) ){ + assert(IsVirtual(pTab)); + continue; + } + tableSeen = 1; -/* -** Allocate a new Select structure and return a pointer to that -** structure. -*/ -SQLITE_PRIVATE Select *sqlite3SelectNew( - Parse *pParse, /* Parsing context */ - ExprList *pEList, /* which columns to include in the result */ - SrcList *pSrc, /* the FROM clause -- which tables to scan */ - Expr *pWhere, /* the WHERE clause */ - ExprList *pGroupBy, /* the GROUP BY clause */ - Expr *pHaving, /* the HAVING clause */ - ExprList *pOrderBy, /* the ORDER BY clause */ - int isDistinct, /* true if the DISTINCT keyword is present */ - Expr *pLimit, /* LIMIT value. NULL means not used */ - Expr *pOffset /* OFFSET value. NULL means no offset */ -){ - Select *pNew; - Select standin; - sqlite3 *db = pParse->db; - pNew = sqlite3DbMallocZero(db, sizeof(*pNew) ); - assert( db->mallocFailed || !pOffset || pLimit ); /* OFFSET implies LIMIT */ - if( pNew==0 ){ - pNew = &standin; - memset(pNew, 0, sizeof(*pNew)); - } - if( pEList==0 ){ - pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ALL,0)); + if( i>0 && zTName==0 ){ + if( (pFrom->jointype & JT_NATURAL)!=0 + && tableAndColumnIndex(pTabList, i, zName, 0, 0) + ){ + /* In a NATURAL join, omit the join columns from the + ** table to the right of the join */ + continue; + } + if( sqlite3IdListIndex(pFrom->pUsing, zName)>=0 ){ + /* In a join with a USING clause, omit columns in the + ** using clause from the table on the right. */ + continue; + } + } + pRight = sqlite3Expr(db, TK_ID, zName); + zColname = zName; + zToFree = 0; + if( longNames || pTabList->nSrc>1 ){ + Expr *pLeft; + pLeft = sqlite3Expr(db, TK_ID, zTabName); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); + if( zSchemaName ){ + pLeft = sqlite3Expr(db, TK_ID, zSchemaName); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr, 0); + } + if( longNames ){ + zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName); + zToFree = zColname; + } + }else{ + pExpr = pRight; + } + pNew = sqlite3ExprListAppend(pParse, pNew, pExpr); + sColname.z = zColname; + sColname.n = sqlite3Strlen30(zColname); + sqlite3ExprListSetName(pParse, pNew, &sColname, 0); + if( pNew && (p->selFlags & SF_NestedFrom)!=0 ){ + struct ExprList_item *pX = &pNew->a[pNew->nExpr-1]; + if( pSub ){ + pX->zSpan = sqlite3DbStrDup(db, pSub->pEList->a[j].zSpan); + testcase( pX->zSpan==0 ); + }else{ + pX->zSpan = sqlite3MPrintf(db, "%s.%s.%s", + zSchemaName, zTabName, zColname); + testcase( pX->zSpan==0 ); + } + pX->bSpanIsTab = 1; + } + sqlite3DbFree(db, zToFree); + } + } + if( !tableSeen ){ + if( zTName ){ + sqlite3ErrorMsg(pParse, "no such table: %s", zTName); + }else{ + sqlite3ErrorMsg(pParse, "no tables specified"); + } + } + } + } + sqlite3ExprListDelete(db, pEList); + p->pEList = pNew; } - pNew->pEList = pEList; - pNew->pSrc = pSrc; - pNew->pWhere = pWhere; - pNew->pGroupBy = pGroupBy; - pNew->pHaving = pHaving; - pNew->pOrderBy = pOrderBy; - pNew->selFlags = isDistinct ? SF_Distinct : 0; - pNew->op = TK_SELECT; - pNew->pLimit = pLimit; - pNew->pOffset = pOffset; - assert( pOffset==0 || pLimit!=0 ); - pNew->addrOpenEphm[0] = -1; - pNew->addrOpenEphm[1] = -1; - pNew->addrOpenEphm[2] = -1; - if( db->mallocFailed ) { - clearSelect(db, pNew); - if( pNew!=&standin ) sqlite3DbFree(db, pNew); - pNew = 0; +#if SQLITE_MAX_COLUMN + if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ + sqlite3ErrorMsg(pParse, "too many columns in result set"); } - return pNew; +#endif + return WRC_Continue; } /* -** Delete the given Select structure and all of its substructures. +** No-op routine for the parse-tree walker. +** +** When this routine is the Walker.xExprCallback then expression trees +** are walked without any actions being taken at each node. Presumably, +** when this routine is used for Walker.xExprCallback then +** Walker.xSelectCallback is set to do something useful for every +** subquery in the parser tree. */ -SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){ - if( p ){ - clearSelect(db, p); - sqlite3DbFree(db, p); - } +static int exprWalkNoop(Walker *NotUsed, Expr *NotUsed2){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + return WRC_Continue; } /* -** Given 1 to 3 identifiers preceeding the JOIN keyword, determine the -** type of join. Return an integer constant that expresses that type -** in terms of the following bit values: -** -** JT_INNER -** JT_CROSS -** JT_OUTER -** JT_NATURAL -** JT_LEFT -** JT_RIGHT +** This routine "expands" a SELECT statement and all of its subqueries. +** For additional information on what it means to "expand" a SELECT +** statement, see the comment on the selectExpand worker callback above. ** -** A full outer join is the combination of JT_LEFT and JT_RIGHT. +** Expanding a SELECT statement is the first step in processing a +** SELECT statement. The SELECT statement must be expanded before +** name resolution is performed. ** -** If an illegal or unsupported join type is seen, then still return -** a join type, but put an error in the pParse structure. +** If anything goes wrong, an error message is written into pParse. +** The calling function can detect the problem by looking at pParse->nErr +** and/or pParse->db->mallocFailed. */ -SQLITE_PRIVATE int sqlite3JoinType(Parse *pParse, Token *pA, Token *pB, Token *pC){ - int jointype = 0; - Token *apAll[3]; - Token *p; - /* 0123456789 123456789 123456789 123 */ - static const char zKeyText[] = "naturaleftouterightfullinnercross"; - static const struct { - u8 i; /* Beginning of keyword text in zKeyText[] */ - u8 nChar; /* Length of the keyword in characters */ - u8 code; /* Join type mask */ - } aKeyword[] = { - /* natural */ { 0, 7, JT_NATURAL }, - /* left */ { 6, 4, JT_LEFT|JT_OUTER }, - /* outer */ { 10, 5, JT_OUTER }, - /* right */ { 14, 5, JT_RIGHT|JT_OUTER }, - /* full */ { 19, 4, JT_LEFT|JT_RIGHT|JT_OUTER }, - /* inner */ { 23, 5, JT_INNER }, - /* cross */ { 28, 5, JT_INNER|JT_CROSS }, - }; - int i, j; - apAll[0] = pA; - apAll[1] = pB; - apAll[2] = pC; - for(i=0; i<3 && apAll[i]; i++){ - p = apAll[i]; - for(j=0; jn==aKeyword[j].nChar - && sqlite3StrNICmp((char*)p->z, &zKeyText[aKeyword[j].i], p->n)==0 ){ - jointype |= aKeyword[j].code; - break; - } - } - testcase( j==0 || j==1 || j==2 || j==3 || j==4 || j==5 || j==6 ); - if( j>=ArraySize(aKeyword) ){ - jointype |= JT_ERROR; - break; - } - } - if( - (jointype & (JT_INNER|JT_OUTER))==(JT_INNER|JT_OUTER) || - (jointype & JT_ERROR)!=0 - ){ - const char *zSp = " "; - assert( pB!=0 ); - if( pC==0 ){ zSp++; } - sqlite3ErrorMsg(pParse, "unknown or unsupported join type: " - "%T %T%s%T", pA, pB, zSp, pC); - jointype = JT_INNER; - }else if( (jointype & JT_OUTER)!=0 - && (jointype & (JT_LEFT|JT_RIGHT))!=JT_LEFT ){ - sqlite3ErrorMsg(pParse, - "RIGHT and FULL OUTER JOINs are not currently supported"); - jointype = JT_INNER; +static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){ + Walker w; + memset(&w, 0, sizeof(w)); + w.xExprCallback = exprWalkNoop; + w.pParse = pParse; + if( pParse->hasCompound ){ + w.xSelectCallback = convertCompoundSelectToSubquery; + sqlite3WalkSelect(&w, pSelect); } - return jointype; + w.xSelectCallback = selectExpander; + w.xSelectCallback2 = selectPopWith; + sqlite3WalkSelect(&w, pSelect); } -/* -** Return the index of a column in a table. Return -1 if the column -** is not contained in the table. -*/ -static int columnIndex(Table *pTab, const char *zCol){ - int i; - for(i=0; inCol; i++){ - if( sqlite3StrICmp(pTab->aCol[i].zName, zCol)==0 ) return i; - } - return -1; -} +#ifndef SQLITE_OMIT_SUBQUERY /* -** Search the first N tables in pSrc, from left to right, looking for a -** table that has a column named zCol. +** This is a Walker.xSelectCallback callback for the sqlite3SelectTypeInfo() +** interface. ** -** When found, set *piTab and *piCol to the table index and column index -** of the matching column and return TRUE. +** For each FROM-clause subquery, add Column.zType and Column.zColl +** information to the Table structure that represents the result set +** of that subquery. ** -** If not found, return FALSE. +** The Table structure that represents the result set was constructed +** by selectExpander() but the type and collation information was omitted +** at that point because identifiers had not yet been resolved. This +** routine is called after identifier resolution. */ -static int tableAndColumnIndex( - SrcList *pSrc, /* Array of tables to search */ - int N, /* Number of tables in pSrc->a[] to search */ - const char *zCol, /* Name of the column we are looking for */ - int *piTab, /* Write index of pSrc->a[] here */ - int *piCol /* Write index of pSrc->a[*piTab].pTab->aCol[] here */ -){ - int i; /* For looping over tables in pSrc */ - int iCol; /* Index of column matching zCol */ +static void selectAddSubqueryTypeInfo(Walker *pWalker, Select *p){ + Parse *pParse; + int i; + SrcList *pTabList; + struct SrcList_item *pFrom; - assert( (piTab==0)==(piCol==0) ); /* Both or neither are NULL */ - for(i=0; ia[i].pTab, zCol); - if( iCol>=0 ){ - if( piTab ){ - *piTab = i; - *piCol = iCol; + assert( p->selFlags & SF_Resolved ); + if( (p->selFlags & SF_HasTypeInfo)==0 ){ + p->selFlags |= SF_HasTypeInfo; + pParse = pWalker->pParse; + pTabList = p->pSrc; + for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ + Table *pTab = pFrom->pTab; + if( ALWAYS(pTab!=0) && (pTab->tabFlags & TF_Ephemeral)!=0 ){ + /* A sub-query in the FROM clause of a SELECT */ + Select *pSel = pFrom->pSelect; + if( pSel ){ + while( pSel->pPrior ) pSel = pSel->pPrior; + selectAddColumnTypeAndCollation(pParse, pTab, pSel); + } } - return 1; } } - return 0; } +#endif -/* -** This function is used to add terms implied by JOIN syntax to the -** WHERE clause expression of a SELECT statement. The new term, which -** is ANDed with the existing WHERE clause, is of the form: -** -** (tab1.col1 = tab2.col2) -** -** where tab1 is the iSrc'th table in SrcList pSrc and tab2 is the -** (iSrc+1)'th. Column col1 is column iColLeft of tab1, and col2 is -** column iColRight of tab2. -*/ -static void addWhereTerm( - Parse *pParse, /* Parsing context */ - SrcList *pSrc, /* List of tables in FROM clause */ - int iLeft, /* Index of first table to join in pSrc */ - int iColLeft, /* Index of column in first table */ - int iRight, /* Index of second table in pSrc */ - int iColRight, /* Index of column in second table */ - int isOuterJoin, /* True if this is an OUTER join */ - Expr **ppWhere /* IN/OUT: The WHERE clause to add to */ -){ - sqlite3 *db = pParse->db; - Expr *pE1; - Expr *pE2; - Expr *pEq; - - assert( iLeftnSrc>iRight ); - assert( pSrc->a[iLeft].pTab ); - assert( pSrc->a[iRight].pTab ); - - pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft); - pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight); - - pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2, 0); - if( pEq && isOuterJoin ){ - ExprSetProperty(pEq, EP_FromJoin); - assert( !ExprHasAnyProperty(pEq, EP_TokenOnly|EP_Reduced) ); - ExprSetIrreducible(pEq); - pEq->iRightJoinTable = (i16)pE2->iTable; - } - *ppWhere = sqlite3ExprAnd(db, *ppWhere, pEq); -} /* -** Set the EP_FromJoin property on all terms of the given expression. -** And set the Expr.iRightJoinTable to iTable for every term in the -** expression. -** -** The EP_FromJoin property is used on terms of an expression to tell -** the LEFT OUTER JOIN processing logic that this term is part of the -** join restriction specified in the ON or USING clause and not a part -** of the more general WHERE clause. These terms are moved over to the -** WHERE clause during join processing but we need to remember that they -** originated in the ON or USING clause. -** -** The Expr.iRightJoinTable tells the WHERE clause processing that the -** expression depends on table iRightJoinTable even if that table is not -** explicitly mentioned in the expression. That information is needed -** for cases like this: -** -** SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.b AND t1.x=5 +** This routine adds datatype and collating sequence information to +** the Table structures of all FROM-clause subqueries in a +** SELECT statement. ** -** The where clause needs to defer the handling of the t1.x=5 -** term until after the t2 loop of the join. In that way, a -** NULL t2 row will be inserted whenever t1.x!=5. If we do not -** defer the handling of t1.x=5, it will be processed immediately -** after the t1 loop and rows with t1.x!=5 will never appear in -** the output, which is incorrect. +** Use this routine after name resolution. */ -static void setJoinExpr(Expr *p, int iTable){ - while( p ){ - ExprSetProperty(p, EP_FromJoin); - assert( !ExprHasAnyProperty(p, EP_TokenOnly|EP_Reduced) ); - ExprSetIrreducible(p); - p->iRightJoinTable = (i16)iTable; - setJoinExpr(p->pLeft, iTable); - p = p->pRight; - } +static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){ +#ifndef SQLITE_OMIT_SUBQUERY + Walker w; + memset(&w, 0, sizeof(w)); + w.xSelectCallback2 = selectAddSubqueryTypeInfo; + w.xExprCallback = exprWalkNoop; + w.pParse = pParse; + sqlite3WalkSelect(&w, pSelect); +#endif } + /* -** This routine processes the join information for a SELECT statement. -** ON and USING clauses are converted into extra terms of the WHERE clause. -** NATURAL joins also create extra WHERE clause terms. +** This routine sets up a SELECT statement for processing. The +** following is accomplished: ** -** The terms of a FROM clause are contained in the Select.pSrc structure. -** The left most table is the first entry in Select.pSrc. The right-most -** table is the last entry. The join operator is held in the entry to -** the left. Thus entry 0 contains the join operator for the join between -** entries 0 and 1. Any ON or USING clauses associated with the join are -** also attached to the left entry. +** * VDBE Cursor numbers are assigned to all FROM-clause terms. +** * Ephemeral Table objects are created for all FROM-clause subqueries. +** * ON and USING clauses are shifted into WHERE statements +** * Wildcards "*" and "TABLE.*" in result sets are expanded. +** * Identifiers in expression are matched to tables. ** -** This routine returns the number of errors encountered. +** This routine acts recursively on all subqueries within the SELECT. */ -static int sqliteProcessJoin(Parse *pParse, Select *p){ - SrcList *pSrc; /* All tables in the FROM clause */ - int i, j; /* Loop counters */ - struct SrcList_item *pLeft; /* Left table being joined */ - struct SrcList_item *pRight; /* Right table being joined */ - - pSrc = p->pSrc; - pLeft = &pSrc->a[0]; - pRight = &pLeft[1]; - for(i=0; inSrc-1; i++, pRight++, pLeft++){ - Table *pLeftTab = pLeft->pTab; - Table *pRightTab = pRight->pTab; - int isOuter; - - if( NEVER(pLeftTab==0 || pRightTab==0) ) continue; - isOuter = (pRight->jointype & JT_OUTER)!=0; - - /* When the NATURAL keyword is present, add WHERE clause terms for - ** every column that the two tables have in common. - */ - if( pRight->jointype & JT_NATURAL ){ - if( pRight->pOn || pRight->pUsing ){ - sqlite3ErrorMsg(pParse, "a NATURAL join may not have " - "an ON or USING clause", 0); - return 1; - } - for(j=0; jnCol; j++){ - char *zName; /* Name of column in the right table */ - int iLeft; /* Matching left table */ - int iLeftCol; /* Matching column in the left table */ - - zName = pRightTab->aCol[j].zName; - if( tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol) ){ - addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, j, - isOuter, &p->pWhere); - } - } - } - - /* Disallow both ON and USING clauses in the same join - */ - if( pRight->pOn && pRight->pUsing ){ - sqlite3ErrorMsg(pParse, "cannot have both ON and USING " - "clauses in the same join"); - return 1; - } - - /* Add the ON clause to the end of the WHERE clause, connected by - ** an AND operator. - */ - if( pRight->pOn ){ - if( isOuter ) setJoinExpr(pRight->pOn, pRight->iCursor); - p->pWhere = sqlite3ExprAnd(pParse->db, p->pWhere, pRight->pOn); - pRight->pOn = 0; - } - - /* Create extra terms on the WHERE clause for each column named - ** in the USING clause. Example: If the two tables to be joined are - ** A and B and the USING clause names X, Y, and Z, then add this - ** to the WHERE clause: A.X=B.X AND A.Y=B.Y AND A.Z=B.Z - ** Report an error if any column mentioned in the USING clause is - ** not contained in both tables to be joined. - */ - if( pRight->pUsing ){ - IdList *pList = pRight->pUsing; - for(j=0; jnId; j++){ - char *zName; /* Name of the term in the USING clause */ - int iLeft; /* Table on the left with matching column name */ - int iLeftCol; /* Column number of matching column on the left */ - int iRightCol; /* Column number of matching column on the right */ - - zName = pList->a[j].zName; - iRightCol = columnIndex(pRightTab, zName); - if( iRightCol<0 - || !tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol) - ){ - sqlite3ErrorMsg(pParse, "cannot join using column %s - column " - "not present in both tables", zName); - return 1; - } - addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, iRightCol, - isOuter, &p->pWhere); - } - } - } - return 0; +SQLITE_PRIVATE void sqlite3SelectPrep( + Parse *pParse, /* The parser context */ + Select *p, /* The SELECT statement being coded. */ + NameContext *pOuterNC /* Name context for container */ +){ + sqlite3 *db; + if( NEVER(p==0) ) return; + db = pParse->db; + if( db->mallocFailed ) return; + if( p->selFlags & SF_HasTypeInfo ) return; + sqlite3SelectExpand(pParse, p); + if( pParse->nErr || db->mallocFailed ) return; + sqlite3ResolveSelectNames(pParse, p, pOuterNC); + if( pParse->nErr || db->mallocFailed ) return; + sqlite3SelectAddTypeInfo(pParse, p); } /* -** Insert code into "v" that will push the record on the top of the -** stack into the sorter. +** Reset the aggregate accumulator. +** +** The aggregate accumulator is a set of memory cells that hold +** intermediate results while calculating an aggregate. This +** routine generates code that stores NULLs in all of those memory +** cells. */ -static void pushOntoSorter( - Parse *pParse, /* Parser context */ - ExprList *pOrderBy, /* The ORDER BY clause */ - Select *pSelect, /* The whole SELECT statement */ - int regData /* Register holding data to be sorted */ -){ +static void resetAccumulator(Parse *pParse, AggInfo *pAggInfo){ Vdbe *v = pParse->pVdbe; - int nExpr = pOrderBy->nExpr; - int regBase = sqlite3GetTempRange(pParse, nExpr+2); - int regRecord = sqlite3GetTempReg(pParse); - sqlite3ExprCacheClear(pParse); - sqlite3ExprCodeExprList(pParse, pOrderBy, regBase, 0); - sqlite3VdbeAddOp2(v, OP_Sequence, pOrderBy->iECursor, regBase+nExpr); - sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+1, 1); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nExpr + 2, regRecord); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pOrderBy->iECursor, regRecord); - sqlite3ReleaseTempReg(pParse, regRecord); - sqlite3ReleaseTempRange(pParse, regBase, nExpr+2); - if( pSelect->iLimit ){ - int addr1, addr2; - int iLimit; - if( pSelect->iOffset ){ - iLimit = pSelect->iOffset+1; - }else{ - iLimit = pSelect->iLimit; + int i; + struct AggInfo_func *pFunc; + int nReg = pAggInfo->nFunc + pAggInfo->nColumn; + if( nReg==0 ) return; +#ifdef SQLITE_DEBUG + /* Verify that all AggInfo registers are within the range specified by + ** AggInfo.mnReg..AggInfo.mxReg */ + assert( nReg==pAggInfo->mxReg-pAggInfo->mnReg+1 ); + for(i=0; inColumn; i++){ + assert( pAggInfo->aCol[i].iMem>=pAggInfo->mnReg + && pAggInfo->aCol[i].iMem<=pAggInfo->mxReg ); + } + for(i=0; inFunc; i++){ + assert( pAggInfo->aFunc[i].iMem>=pAggInfo->mnReg + && pAggInfo->aFunc[i].iMem<=pAggInfo->mxReg ); + } +#endif + sqlite3VdbeAddOp3(v, OP_Null, 0, pAggInfo->mnReg, pAggInfo->mxReg); + for(pFunc=pAggInfo->aFunc, i=0; inFunc; i++, pFunc++){ + if( pFunc->iDistinct>=0 ){ + Expr *pE = pFunc->pExpr; + assert( !ExprHasProperty(pE, EP_xIsSelect) ); + if( pE->x.pList==0 || pE->x.pList->nExpr!=1 ){ + sqlite3ErrorMsg(pParse, "DISTINCT aggregates must have exactly one " + "argument"); + pFunc->iDistinct = -1; + }else{ + KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0, 0); + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0, + (char*)pKeyInfo, P4_KEYINFO); + } } - addr1 = sqlite3VdbeAddOp1(v, OP_IfZero, iLimit); - sqlite3VdbeAddOp2(v, OP_AddImm, iLimit, -1); - addr2 = sqlite3VdbeAddOp0(v, OP_Goto); - sqlite3VdbeJumpHere(v, addr1); - sqlite3VdbeAddOp1(v, OP_Last, pOrderBy->iECursor); - sqlite3VdbeAddOp1(v, OP_Delete, pOrderBy->iECursor); - sqlite3VdbeJumpHere(v, addr2); } } /* -** Add code to implement the OFFSET +** Invoke the OP_AggFinalize opcode for every aggregate function +** in the AggInfo structure. */ -static void codeOffset( - Vdbe *v, /* Generate code into this VM */ - Select *p, /* The SELECT statement being coded */ - int iContinue /* Jump here to skip the current record */ -){ - if( p->iOffset && iContinue!=0 ){ - int addr; - sqlite3VdbeAddOp2(v, OP_AddImm, p->iOffset, -1); - addr = sqlite3VdbeAddOp1(v, OP_IfNeg, p->iOffset); - sqlite3VdbeAddOp2(v, OP_Goto, 0, iContinue); - VdbeComment((v, "skip OFFSET records")); - sqlite3VdbeJumpHere(v, addr); +static void finalizeAggFunctions(Parse *pParse, AggInfo *pAggInfo){ + Vdbe *v = pParse->pVdbe; + int i; + struct AggInfo_func *pF; + for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ + ExprList *pList = pF->pExpr->x.pList; + assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); + sqlite3VdbeAddOp4(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0, 0, + (void*)pF->pFunc, P4_FUNCDEF); } } /* -** Add code that will check to make sure the N registers starting at iMem -** form a distinct entry. iTab is a sorting index that holds previously -** seen combinations of the N values. A new entry is made in iTab -** if the current N values are new. -** -** A jump to addrRepeat is made and the N+1 values are popped from the -** stack if the top N elements are not distinct. +** Update the accumulator memory cells for an aggregate based on +** the current cursor position. */ -static void codeDistinct( - Parse *pParse, /* Parsing and code generating context */ - int iTab, /* A sorting index used to test for distinctness */ - int addrRepeat, /* Jump to here if not distinct */ - int N, /* Number of elements */ - int iMem /* First element */ -){ - Vdbe *v; - int r1; +static void updateAccumulator(Parse *pParse, AggInfo *pAggInfo){ + Vdbe *v = pParse->pVdbe; + int i; + int regHit = 0; + int addrHitTest = 0; + struct AggInfo_func *pF; + struct AggInfo_col *pC; - v = pParse->pVdbe; - r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); - sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iTab, r1); - sqlite3ReleaseTempReg(pParse, r1); + pAggInfo->directMode = 1; + for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ + int nArg; + int addrNext = 0; + int regAgg; + ExprList *pList = pF->pExpr->x.pList; + assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); + if( pList ){ + nArg = pList->nExpr; + regAgg = sqlite3GetTempRange(pParse, nArg); + sqlite3ExprCodeExprList(pParse, pList, regAgg, SQLITE_ECEL_DUP); + }else{ + nArg = 0; + regAgg = 0; + } + if( pF->iDistinct>=0 ){ + addrNext = sqlite3VdbeMakeLabel(v); + assert( nArg==1 ); + codeDistinct(pParse, pF->iDistinct, addrNext, 1, regAgg); + } + if( pF->pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){ + CollSeq *pColl = 0; + struct ExprList_item *pItem; + int j; + assert( pList!=0 ); /* pList!=0 if pF->pFunc has NEEDCOLL */ + for(j=0, pItem=pList->a; !pColl && jpExpr); + } + if( !pColl ){ + pColl = pParse->db->pDfltColl; + } + if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem; + sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ); + } + sqlite3VdbeAddOp4(v, OP_AggStep, 0, regAgg, pF->iMem, + (void*)pF->pFunc, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nArg); + sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg); + sqlite3ReleaseTempRange(pParse, regAgg, nArg); + if( addrNext ){ + sqlite3VdbeResolveLabel(v, addrNext); + sqlite3ExprCacheClear(pParse); + } + } + + /* Before populating the accumulator registers, clear the column cache. + ** Otherwise, if any of the required column values are already present + ** in registers, sqlite3ExprCode() may use OP_SCopy to copy the value + ** to pC->iMem. But by the time the value is used, the original register + ** may have been used, invalidating the underlying buffer holding the + ** text or blob value. See ticket [883034dcb5]. + ** + ** Another solution would be to change the OP_SCopy used to copy cached + ** values to an OP_Copy. + */ + if( regHit ){ + addrHitTest = sqlite3VdbeAddOp1(v, OP_If, regHit); VdbeCoverage(v); + } + sqlite3ExprCacheClear(pParse); + for(i=0, pC=pAggInfo->aCol; inAccumulator; i++, pC++){ + sqlite3ExprCode(pParse, pC->pExpr, pC->iMem); + } + pAggInfo->directMode = 0; + sqlite3ExprCacheClear(pParse); + if( addrHitTest ){ + sqlite3VdbeJumpHere(v, addrHitTest); + } } -#ifndef SQLITE_OMIT_SUBQUERY /* -** Generate an error message when a SELECT is used within a subexpression -** (example: "a IN (SELECT * FROM table)") but it has more than 1 result -** column. We do this in a subroutine because the error used to occur -** in multiple places. (The error only occurs in one place now, but we -** retain the subroutine to minimize code disruption.) +** Add a single OP_Explain instruction to the VDBE to explain a simple +** count(*) query ("SELECT count(*) FROM pTab"). */ -static int checkForMultiColumnSelectError( - Parse *pParse, /* Parse context. */ - SelectDest *pDest, /* Destination of SELECT results */ - int nExpr /* Number of result columns returned by SELECT */ +#ifndef SQLITE_OMIT_EXPLAIN +static void explainSimpleCount( + Parse *pParse, /* Parse context */ + Table *pTab, /* Table being queried */ + Index *pIdx /* Index used to optimize scan, or NULL */ ){ - int eDest = pDest->eDest; - if( nExpr>1 && (eDest==SRT_Mem || eDest==SRT_Set) ){ - sqlite3ErrorMsg(pParse, "only a single result allowed for " - "a SELECT that is part of an expression"); - return 1; - }else{ - return 0; + if( pParse->explain==2 ){ + int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx))); + char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s", + pTab->zName, + bCover ? " USING COVERING INDEX " : "", + bCover ? pIdx->zName : "" + ); + sqlite3VdbeAddOp4( + pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC + ); } } +#else +# define explainSimpleCount(a,b,c) #endif /* -** This routine generates the code for the inside of the inner loop -** of a SELECT. +** Generate code for the SELECT statement given in the p argument. ** -** If srcTab and nColumn are both zero, then the pEList expressions -** are evaluated in order to get the data for this row. If nColumn>0 -** then data is pulled from srcTab and pEList is used only to get the -** datatypes for each column. +** The results are returned according to the SelectDest structure. +** See comments in sqliteInt.h for further information. +** +** This routine returns the number of errors. If any errors are +** encountered, then an appropriate error message is left in +** pParse->zErrMsg. +** +** This routine does NOT free the Select structure passed in. The +** calling function needs to do that. */ -static void selectInnerLoop( - Parse *pParse, /* The parser context */ - Select *p, /* The complete select statement being coded */ - ExprList *pEList, /* List of values being extracted */ - int srcTab, /* Pull data from this table */ - int nColumn, /* Number of columns in the source table */ - ExprList *pOrderBy, /* If not NULL, sort results using this key */ - int distinct, /* If >=0, make sure results are distinct */ - SelectDest *pDest, /* How to dispose of the results */ - int iContinue, /* Jump here to continue with next row */ - int iBreak /* Jump here to break out of the inner loop */ +SQLITE_PRIVATE int sqlite3Select( + Parse *pParse, /* The parser context */ + Select *p, /* The SELECT statement being coded. */ + SelectDest *pDest /* What to do with the query results */ ){ - Vdbe *v = pParse->pVdbe; - int i; - int hasDistinct; /* True if the DISTINCT keyword is present */ - int regResult; /* Start of memory holding result set */ - int eDest = pDest->eDest; /* How to dispose of results */ - int iParm = pDest->iParm; /* First argument to disposal method */ - int nResultCol; /* Number of result columns */ + int i, j; /* Loop counters */ + WhereInfo *pWInfo; /* Return from sqlite3WhereBegin() */ + Vdbe *v; /* The virtual machine under construction */ + int isAgg; /* True for select lists like "count(*)" */ + ExprList *pEList; /* List of columns to extract. */ + SrcList *pTabList; /* List of tables to select from */ + Expr *pWhere; /* The WHERE clause. May be NULL */ + ExprList *pGroupBy; /* The GROUP BY clause. May be NULL */ + Expr *pHaving; /* The HAVING clause. May be NULL */ + int rc = 1; /* Value to return from this function */ + DistinctCtx sDistinct; /* Info on how to code the DISTINCT keyword */ + SortCtx sSort; /* Info on how to code the ORDER BY clause */ + AggInfo sAggInfo; /* Information used by aggregate queries */ + int iEnd; /* Address of the end of the query */ + sqlite3 *db; /* The database connection */ - assert( v ); - if( NEVER(v==0) ) return; - assert( pEList!=0 ); - hasDistinct = distinct>=0; - if( pOrderBy==0 && !hasDistinct ){ - codeOffset(v, p, iContinue); - } +#ifndef SQLITE_OMIT_EXPLAIN + int iRestoreSelectId = pParse->iSelectId; + pParse->iSelectId = pParse->iNextSelectId++; +#endif - /* Pull the requested columns. - */ - if( nColumn>0 ){ - nResultCol = nColumn; - }else{ - nResultCol = pEList->nExpr; - } - if( pDest->iMem==0 ){ - pDest->iMem = pParse->nMem+1; - pDest->nMem = nResultCol; - pParse->nMem += nResultCol; - }else{ - assert( pDest->nMem==nResultCol ); + db = pParse->db; + if( p==0 || db->mallocFailed || pParse->nErr ){ + return 1; } - regResult = pDest->iMem; - if( nColumn>0 ){ - for(i=0; inSelectIndent++; + SELECTTRACE(1,pParse,p, ("begin processing:\n")); + if( sqlite3SelectTrace & 0x100 ){ + sqlite3TreeViewSelect(0, p, 0); } - nColumn = nResultCol; +#endif - /* If the DISTINCT keyword was present on the SELECT statement - ** and this row has been seen before, then do not make this row - ** part of the result. - */ - if( hasDistinct ){ - assert( pEList!=0 ); - assert( pEList->nExpr==nColumn ); - codeDistinct(pParse, distinct, iContinue, nColumn, regResult); - if( pOrderBy==0 ){ - codeOffset(v, p, iContinue); - } + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistFifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Fifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistQueue ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Queue ); + if( IgnorableOrderby(pDest) ){ + assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union || + pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard || + pDest->eDest==SRT_Queue || pDest->eDest==SRT_DistFifo || + pDest->eDest==SRT_DistQueue || pDest->eDest==SRT_Fifo); + /* If ORDER BY makes no difference in the output then neither does + ** DISTINCT so it can be removed too. */ + sqlite3ExprListDelete(db, p->pOrderBy); + p->pOrderBy = 0; + p->selFlags &= ~SF_Distinct; } + sqlite3SelectPrep(pParse, p, 0); + memset(&sSort, 0, sizeof(sSort)); + sSort.pOrderBy = p->pOrderBy; + pTabList = p->pSrc; + pEList = p->pEList; + if( pParse->nErr || db->mallocFailed ){ + goto select_end; + } + isAgg = (p->selFlags & SF_Aggregate)!=0; + assert( pEList!=0 ); - switch( eDest ){ - /* In this mode, write each query result to the key of the temporary - ** table iParm. - */ -#ifndef SQLITE_OMIT_COMPOUND_SELECT - case SRT_Union: { - int r1; - r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nColumn, r1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); - sqlite3ReleaseTempReg(pParse, r1); - break; - } + /* Begin generating code. + */ + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto select_end; - /* Construct a record from the query result, but instead of - ** saving that record, use it as a key to delete elements from - ** the temporary table iParm. - */ - case SRT_Except: { - sqlite3VdbeAddOp3(v, OP_IdxDelete, iParm, regResult, nColumn); - break; - } + /* If writing to memory or generating a set + ** only a single column may be output. + */ +#ifndef SQLITE_OMIT_SUBQUERY + if( checkForMultiColumnSelectError(pParse, pDest, pEList->nExpr) ){ + goto select_end; + } #endif - /* Store the result as data using a unique key. - */ - case SRT_Table: - case SRT_EphemTab: { - int r1 = sqlite3GetTempReg(pParse); - testcase( eDest==SRT_Table ); - testcase( eDest==SRT_EphemTab ); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nColumn, r1); - if( pOrderBy ){ - pushOntoSorter(pParse, pOrderBy, p, r1); - }else{ - int r2 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2); - sqlite3VdbeAddOp3(v, OP_Insert, iParm, r1, r2); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - sqlite3ReleaseTempReg(pParse, r2); - } - sqlite3ReleaseTempReg(pParse, r1); - break; - } + /* Generate code for all sub-queries in the FROM clause + */ +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + for(i=0; !p->pPrior && inSrc; i++){ + struct SrcList_item *pItem = &pTabList->a[i]; + SelectDest dest; + Select *pSub = pItem->pSelect; + int isAggSub; -#ifndef SQLITE_OMIT_SUBQUERY - /* If we are creating a set for an "expr IN (SELECT ...)" construct, - ** then there should be a single item on the stack. Write this - ** item into the set table with bogus data. - */ - case SRT_Set: { - assert( nColumn==1 ); - p->affinity = sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affinity); - if( pOrderBy ){ - /* At first glance you would think we could optimize out the - ** ORDER BY in this case since the order of entries in the set - ** does not matter. But there might be a LIMIT clause, in which - ** case the order does matter */ - pushOntoSorter(pParse, pOrderBy, p, regResult); - }else{ - int r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, 1, r1, &p->affinity, 1); - sqlite3ExprCacheAffinityChange(pParse, regResult, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); - sqlite3ReleaseTempReg(pParse, r1); + if( pSub==0 ) continue; + + /* Sometimes the code for a subquery will be generated more than + ** once, if the subquery is part of the WHERE clause in a LEFT JOIN, + ** for example. In that case, do not regenerate the code to manifest + ** a view or the co-routine to implement a view. The first instance + ** is sufficient, though the subroutine to manifest the view does need + ** to be invoked again. */ + if( pItem->addrFillSub ){ + if( pItem->viaCoroutine==0 ){ + sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub); } - break; + continue; } - /* If any row exist in the result set, record that fact and abort. + /* Increment Parse.nHeight by the height of the largest expression + ** tree referred to by this, the parent select. The child select + ** may contain expression trees of at most + ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit + ** more conservative than necessary, but much easier than enforcing + ** an exact limit. */ - case SRT_Exists: { - sqlite3VdbeAddOp2(v, OP_Integer, 1, iParm); - /* The LIMIT clause will terminate the loop for us */ - break; - } + pParse->nHeight += sqlite3SelectExprHeight(p); - /* If this is a scalar select that is part of an expression, then - ** store the results in the appropriate memory cell and break out - ** of the scan loop. - */ - case SRT_Mem: { - assert( nColumn==1 ); - if( pOrderBy ){ - pushOntoSorter(pParse, pOrderBy, p, regResult); - }else{ - sqlite3ExprCodeMove(pParse, regResult, iParm, 1); - /* The LIMIT clause will jump out of the loop for us */ + isAggSub = (pSub->selFlags & SF_Aggregate)!=0; + if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){ + /* This subquery can be absorbed into its parent. */ + if( isAggSub ){ + isAgg = 1; + p->selFlags |= SF_Aggregate; } - break; - } -#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ - - /* Send the data to the callback function or to a subroutine. In the - ** case of a subroutine, the subroutine itself is responsible for - ** popping the data from the stack. - */ - case SRT_Coroutine: - case SRT_Output: { - testcase( eDest==SRT_Coroutine ); - testcase( eDest==SRT_Output ); - if( pOrderBy ){ - int r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nColumn, r1); - pushOntoSorter(pParse, pOrderBy, p, r1); - sqlite3ReleaseTempReg(pParse, r1); - }else if( eDest==SRT_Coroutine ){ - sqlite3VdbeAddOp1(v, OP_Yield, pDest->iParm); + i = -1; + }else if( pTabList->nSrc==1 + && OptimizationEnabled(db, SQLITE_SubqCoroutine) + ){ + /* Implement a co-routine that will return a single row of the result + ** set on each invocation. + */ + int addrTop = sqlite3VdbeCurrentAddr(v)+1; + pItem->regReturn = ++pParse->nMem; + sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop); + VdbeComment((v, "%s", pItem->pTab->zName)); + pItem->addrFillSub = addrTop; + sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn); + explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); + sqlite3Select(pParse, pSub, &dest); + pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow); + pItem->viaCoroutine = 1; + pItem->regResult = dest.iSdst; + sqlite3VdbeAddOp1(v, OP_EndCoroutine, pItem->regReturn); + sqlite3VdbeJumpHere(v, addrTop-1); + sqlite3ClearTempRegCache(pParse); + }else{ + /* Generate a subroutine that will fill an ephemeral table with + ** the content of this subquery. pItem->addrFillSub will point + ** to the address of the generated subroutine. pItem->regReturn + ** is a register allocated to hold the subroutine return address + */ + int topAddr; + int onceAddr = 0; + int retAddr; + assert( pItem->addrFillSub==0 ); + pItem->regReturn = ++pParse->nMem; + topAddr = sqlite3VdbeAddOp2(v, OP_Integer, 0, pItem->regReturn); + pItem->addrFillSub = topAddr+1; + if( pItem->isCorrelated==0 ){ + /* If the subquery is not correlated and if we are not inside of + ** a trigger, then we only need to compute the value of the subquery + ** once. */ + onceAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v); + VdbeComment((v, "materialize \"%s\"", pItem->pTab->zName)); }else{ - sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, nColumn); - sqlite3ExprCacheAffinityChange(pParse, regResult, nColumn); + VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName)); } - break; + sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); + explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); + sqlite3Select(pParse, pSub, &dest); + pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow); + if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr); + retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn); + VdbeComment((v, "end %s", pItem->pTab->zName)); + sqlite3VdbeChangeP1(v, topAddr, retAddr); + sqlite3ClearTempRegCache(pParse); } - -#if !defined(SQLITE_OMIT_TRIGGER) - /* Discard the results. This is used for SELECT statements inside - ** the body of a TRIGGER. The purpose of such selects is to call - ** user-defined functions that have side effects. We do not care - ** about the actual results of the select. - */ - default: { - assert( eDest==SRT_Discard ); - break; + if( /*pParse->nErr ||*/ db->mallocFailed ){ + goto select_end; } -#endif - } - - /* Jump to the end of the loop if the LIMIT is reached. Except, if - ** there is a sorter, in which case the sorter has already limited - ** the output for us. - */ - if( pOrderBy==0 && p->iLimit ){ - sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); - } -} - -/* -** Given an expression list, generate a KeyInfo structure that records -** the collating sequence for each expression in that expression list. -** -** If the ExprList is an ORDER BY or GROUP BY clause then the resulting -** KeyInfo structure is appropriate for initializing a virtual index to -** implement that clause. If the ExprList is the result set of a SELECT -** then the KeyInfo structure is appropriate for initializing a virtual -** index to implement a DISTINCT test. -** -** Space to hold the KeyInfo structure is obtain from malloc. The calling -** function is responsible for seeing that this structure is eventually -** freed. Add the KeyInfo structure to the P4 field of an opcode using -** P4_KEYINFO_HANDOFF is the usual way of dealing with this. -*/ -static KeyInfo *keyInfoFromExprList(Parse *pParse, ExprList *pList){ - sqlite3 *db = pParse->db; - int nExpr; - KeyInfo *pInfo; - struct ExprList_item *pItem; - int i; - - nExpr = pList->nExpr; - pInfo = sqlite3DbMallocZero(db, sizeof(*pInfo) + nExpr*(sizeof(CollSeq*)+1) ); - if( pInfo ){ - pInfo->aSortOrder = (u8*)&pInfo->aColl[nExpr]; - pInfo->nField = (u16)nExpr; - pInfo->enc = ENC(db); - pInfo->db = db; - for(i=0, pItem=pList->a; ipExpr); - if( !pColl ){ - pColl = db->pDfltColl; - } - pInfo->aColl[i] = pColl; - pInfo->aSortOrder[i] = pItem->sortOrder; + pParse->nHeight -= sqlite3SelectExprHeight(p); + pTabList = p->pSrc; + if( !IgnorableOrderby(pDest) ){ + sSort.pOrderBy = p->pOrderBy; } } - return pInfo; -} + pEList = p->pEList; +#endif + pWhere = p->pWhere; + pGroupBy = p->pGroupBy; + pHaving = p->pHaving; + sDistinct.isTnct = (p->selFlags & SF_Distinct)!=0; #ifndef SQLITE_OMIT_COMPOUND_SELECT -/* -** Name of the connection operator, used for error messages. -*/ -static const char *selectOpName(int id){ - char *z; - switch( id ){ - case TK_ALL: z = "UNION ALL"; break; - case TK_INTERSECT: z = "INTERSECT"; break; - case TK_EXCEPT: z = "EXCEPT"; break; - default: z = "UNION"; break; - } - return z; -} -#endif /* SQLITE_OMIT_COMPOUND_SELECT */ - -#ifndef SQLITE_OMIT_EXPLAIN -/* -** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function -** is a no-op. Otherwise, it adds a single row of output to the EQP result, -** where the caption is of the form: -** -** "USE TEMP B-TREE FOR xxx" -** -** where xxx is one of "DISTINCT", "ORDER BY" or "GROUP BY". Exactly which -** is determined by the zUsage argument. -*/ -static void explainTempTable(Parse *pParse, const char *zUsage){ - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf(pParse->db, "USE TEMP B-TREE FOR %s", zUsage); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -} - -/* -** Assign expression b to lvalue a. A second, no-op, version of this macro -** is provided when SQLITE_OMIT_EXPLAIN is defined. This allows the code -** in sqlite3Select() to assign values to structure member variables that -** only exist if SQLITE_OMIT_EXPLAIN is not defined without polluting the -** code with #ifndef directives. -*/ -# define explainSetInteger(a, b) a = b - -#else -/* No-op versions of the explainXXX() functions and macros. */ -# define explainTempTable(y,z) -# define explainSetInteger(y,z) + /* If there is are a sequence of queries, do the earlier ones first. + */ + if( p->pPrior ){ + rc = multiSelect(pParse, p, pDest); + explainSetInteger(pParse->iSelectId, iRestoreSelectId); +#if SELECTTRACE_ENABLED + SELECTTRACE(1,pParse,p,("end compound-select processing\n")); + pParse->nSelectIndent--; #endif - -#if !defined(SQLITE_OMIT_EXPLAIN) && !defined(SQLITE_OMIT_COMPOUND_SELECT) -/* -** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function -** is a no-op. Otherwise, it adds a single row of output to the EQP result, -** where the caption is of one of the two forms: -** -** "COMPOSITE SUBQUERIES iSub1 and iSub2 (op)" -** "COMPOSITE SUBQUERIES iSub1 and iSub2 USING TEMP B-TREE (op)" -** -** where iSub1 and iSub2 are the integers passed as the corresponding -** function parameters, and op is the text representation of the parameter -** of the same name. The parameter "op" must be one of TK_UNION, TK_EXCEPT, -** TK_INTERSECT or TK_ALL. The first form is used if argument bUseTmp is -** false, or the second form if it is true. -*/ -static void explainComposite( - Parse *pParse, /* Parse context */ - int op, /* One of TK_UNION, TK_EXCEPT etc. */ - int iSub1, /* Subquery id 1 */ - int iSub2, /* Subquery id 2 */ - int bUseTmp /* True if a temp table was used */ -){ - assert( op==TK_UNION || op==TK_EXCEPT || op==TK_INTERSECT || op==TK_ALL ); - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf( - pParse->db, "COMPOUND SUBQUERIES %d AND %d %s(%s)", iSub1, iSub2, - bUseTmp?"USING TEMP B-TREE ":"", selectOpName(op) - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -} -#else -/* No-op versions of the explainXXX() functions and macros. */ -# define explainComposite(v,w,x,y,z) + return rc; + } #endif -/* -** If the inner loop was generated using a non-null pOrderBy argument, -** then the results were placed in a sorter. After the loop is terminated -** we need to run the sorter and output the results. The following -** routine generates the code needed to do that. -*/ -static void generateSortTail( - Parse *pParse, /* Parsing context */ - Select *p, /* The SELECT statement */ - Vdbe *v, /* Generate code into this VDBE */ - int nColumn, /* Number of columns of data */ - SelectDest *pDest /* Write the sorted results here */ -){ - int addrBreak = sqlite3VdbeMakeLabel(v); /* Jump here to exit loop */ - int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */ - int addr; - int iTab; - int pseudoTab = 0; - ExprList *pOrderBy = p->pOrderBy; + /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and + ** if the select-list is the same as the ORDER BY list, then this query + ** can be rewritten as a GROUP BY. In other words, this: + ** + ** SELECT DISTINCT xyz FROM ... ORDER BY xyz + ** + ** is transformed to: + ** + ** SELECT xyz FROM ... GROUP BY xyz + ** + ** The second form is preferred as a single index (or temp-table) may be + ** used for both the ORDER BY and DISTINCT processing. As originally + ** written the query must use a temp-table for at least one of the ORDER + ** BY and DISTINCT, and an index or separate temp-table for the other. + */ + if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct + && sqlite3ExprListCompare(sSort.pOrderBy, p->pEList, -1)==0 + ){ + p->selFlags &= ~SF_Distinct; + p->pGroupBy = sqlite3ExprListDup(db, p->pEList, 0); + pGroupBy = p->pGroupBy; + sSort.pOrderBy = 0; + /* Notice that even thought SF_Distinct has been cleared from p->selFlags, + ** the sDistinct.isTnct is still set. Hence, isTnct represents the + ** original setting of the SF_Distinct flag, not the current setting */ + assert( sDistinct.isTnct ); + } - int eDest = pDest->eDest; - int iParm = pDest->iParm; + /* If there is an ORDER BY clause, then this sorting + ** index might end up being unused if the data can be + ** extracted in pre-sorted order. If that is the case, then the + ** OP_OpenEphemeral instruction will be changed to an OP_Noop once + ** we figure out that the sorting index is not needed. The addrSortIndex + ** variable is used to facilitate that change. + */ + if( sSort.pOrderBy ){ + KeyInfo *pKeyInfo; + pKeyInfo = keyInfoFromExprList(pParse, sSort.pOrderBy, 0, 0); + sSort.iECursor = pParse->nTab++; + sSort.addrSortIndex = + sqlite3VdbeAddOp4(v, OP_OpenEphemeral, + sSort.iECursor, sSort.pOrderBy->nExpr+1+pEList->nExpr, 0, + (char*)pKeyInfo, P4_KEYINFO + ); + }else{ + sSort.addrSortIndex = -1; + } - int regRow; - int regRowid; + /* If the output is destined for a temporary table, open that table. + */ + if( pDest->eDest==SRT_EphemTab ){ + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pDest->iSDParm, pEList->nExpr); + } - iTab = pOrderBy->iECursor; - regRow = sqlite3GetTempReg(pParse); - if( eDest==SRT_Output || eDest==SRT_Coroutine ){ - pseudoTab = pParse->nTab++; - sqlite3VdbeAddOp3(v, OP_OpenPseudo, pseudoTab, regRow, nColumn); - regRowid = 0; + /* Set the limiter. + */ + iEnd = sqlite3VdbeMakeLabel(v); + p->nSelectRow = LARGEST_INT64; + computeLimitRegisters(pParse, p, iEnd); + if( p->iLimit==0 && sSort.addrSortIndex>=0 ){ + sqlite3VdbeGetOp(v, sSort.addrSortIndex)->opcode = OP_SorterOpen; + sSort.sortFlags |= SORTFLAG_UseSorter; + } + + /* Open a virtual index to use for the distinct set. + */ + if( p->selFlags & SF_Distinct ){ + sDistinct.tabTnct = pParse->nTab++; + sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, + sDistinct.tabTnct, 0, 0, + (char*)keyInfoFromExprList(pParse, p->pEList,0,0), + P4_KEYINFO); + sqlite3VdbeChangeP5(v, BTREE_UNORDERED); + sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED; }else{ - regRowid = sqlite3GetTempReg(pParse); + sDistinct.eTnctType = WHERE_DISTINCT_NOOP; } - addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); - codeOffset(v, p, addrContinue); - sqlite3VdbeAddOp3(v, OP_Column, iTab, pOrderBy->nExpr + 1, regRow); - switch( eDest ){ - case SRT_Table: - case SRT_EphemTab: { - testcase( eDest==SRT_Table ); - testcase( eDest==SRT_EphemTab ); - sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, regRowid); - sqlite3VdbeAddOp3(v, OP_Insert, iParm, regRow, regRowid); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - break; + + if( !isAgg && pGroupBy==0 ){ + /* No aggregate functions and no GROUP BY clause */ + u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0); + + /* Begin the database scan. */ + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy, + p->pEList, wctrlFlags, 0); + if( pWInfo==0 ) goto select_end; + if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){ + p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo); } -#ifndef SQLITE_OMIT_SUBQUERY - case SRT_Set: { - assert( nColumn==1 ); - sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, 1, regRowid, &p->affinity, 1); - sqlite3ExprCacheAffinityChange(pParse, regRow, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid); - break; + if( sDistinct.isTnct && sqlite3WhereIsDistinct(pWInfo) ){ + sDistinct.eTnctType = sqlite3WhereIsDistinct(pWInfo); } - case SRT_Mem: { - assert( nColumn==1 ); - sqlite3ExprCodeMove(pParse, regRow, iParm, 1); - /* The LIMIT clause will terminate the loop for us */ - break; + if( sSort.pOrderBy ){ + sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo); + if( sSort.nOBSat==sSort.pOrderBy->nExpr ){ + sSort.pOrderBy = 0; + } } -#endif - default: { - int i; - assert( eDest==SRT_Output || eDest==SRT_Coroutine ); - testcase( eDest==SRT_Output ); - testcase( eDest==SRT_Coroutine ); - for(i=0; iiMem+i ); - sqlite3VdbeAddOp3(v, OP_Column, pseudoTab, i, pDest->iMem+i); - if( i==0 ){ - sqlite3VdbeChangeP5(v, OPFLAG_CLEARCACHE); - } + + /* If sorting index that was created by a prior OP_OpenEphemeral + ** instruction ended up not being needed, then change the OP_OpenEphemeral + ** into an OP_Noop. + */ + if( sSort.addrSortIndex>=0 && sSort.pOrderBy==0 ){ + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); + } + + /* Use the standard inner loop. */ + selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest, + sqlite3WhereContinueLabel(pWInfo), + sqlite3WhereBreakLabel(pWInfo)); + + /* End the database scan loop. + */ + sqlite3WhereEnd(pWInfo); + }else{ + /* This case when there exist aggregate functions or a GROUP BY clause + ** or both */ + NameContext sNC; /* Name context for processing aggregate information */ + int iAMem; /* First Mem address for storing current GROUP BY */ + int iBMem; /* First Mem address for previous GROUP BY */ + int iUseFlag; /* Mem address holding flag indicating that at least + ** one row of the input to the aggregator has been + ** processed */ + int iAbortFlag; /* Mem address which causes query abort if positive */ + int groupBySort; /* Rows come from source in GROUP BY order */ + int addrEnd; /* End of processing for this SELECT */ + int sortPTab = 0; /* Pseudotable used to decode sorting results */ + int sortOut = 0; /* Output register from the sorter */ + int orderByGrp = 0; /* True if the GROUP BY and ORDER BY are the same */ + + /* Remove any and all aliases between the result set and the + ** GROUP BY clause. + */ + if( pGroupBy ){ + int k; /* Loop counter */ + struct ExprList_item *pItem; /* For looping over expression in a list */ + + for(k=p->pEList->nExpr, pItem=p->pEList->a; k>0; k--, pItem++){ + pItem->u.x.iAlias = 0; } - if( eDest==SRT_Output ){ - sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iMem, nColumn); - sqlite3ExprCacheAffinityChange(pParse, pDest->iMem, nColumn); - }else{ - sqlite3VdbeAddOp1(v, OP_Yield, pDest->iParm); + for(k=pGroupBy->nExpr, pItem=pGroupBy->a; k>0; k--, pItem++){ + pItem->u.x.iAlias = 0; } - break; + if( p->nSelectRow>100 ) p->nSelectRow = 100; + }else{ + p->nSelectRow = 1; } - } - sqlite3ReleaseTempReg(pParse, regRow); - sqlite3ReleaseTempReg(pParse, regRowid); - /* The bottom of the loop - */ - sqlite3VdbeResolveLabel(v, addrContinue); - sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); - sqlite3VdbeResolveLabel(v, addrBreak); - if( eDest==SRT_Output || eDest==SRT_Coroutine ){ - sqlite3VdbeAddOp2(v, OP_Close, pseudoTab, 0); - } -} -/* -** Return a pointer to a string containing the 'declaration type' of the -** expression pExpr. The string may be treated as static by the caller. -** -** The declaration type is the exact datatype definition extracted from the -** original CREATE TABLE statement if the expression is a column. The -** declaration type for a ROWID field is INTEGER. Exactly when an expression -** is considered a column can be complex in the presence of subqueries. The -** result-set expression in all of the following SELECT statements is -** considered a column by this function. -** -** SELECT col FROM tbl; -** SELECT (SELECT col FROM tbl; -** SELECT (SELECT col FROM tbl); -** SELECT abc FROM (SELECT col AS abc FROM tbl); -** -** The declaration type for any expression other than a column is NULL. -*/ -static const char *columnType( - NameContext *pNC, - Expr *pExpr, - const char **pzOriginDb, - const char **pzOriginTab, - const char **pzOriginCol -){ - char const *zType = 0; - char const *zOriginDb = 0; - char const *zOriginTab = 0; - char const *zOriginCol = 0; - int j; - if( NEVER(pExpr==0) || pNC->pSrcList==0 ) return 0; + /* If there is both a GROUP BY and an ORDER BY clause and they are + ** identical, then it may be possible to disable the ORDER BY clause + ** on the grounds that the GROUP BY will cause elements to come out + ** in the correct order. It also may not - the GROUP BY may use a + ** database index that causes rows to be grouped together as required + ** but not actually sorted. Either way, record the fact that the + ** ORDER BY and GROUP BY clauses are the same by setting the orderByGrp + ** variable. */ + if( sqlite3ExprListCompare(pGroupBy, sSort.pOrderBy, -1)==0 ){ + orderByGrp = 1; + } + + /* Create a label to jump to when we want to abort the query */ + addrEnd = sqlite3VdbeMakeLabel(v); - switch( pExpr->op ){ - case TK_AGG_COLUMN: - case TK_COLUMN: { - /* The expression is a column. Locate the table the column is being - ** extracted from in NameContext.pSrcList. This table may be real - ** database table or a subquery. + /* Convert TK_COLUMN nodes into TK_AGG_COLUMN and make entries in + ** sAggInfo for all TK_AGG_FUNCTION nodes in expressions of the + ** SELECT statement. + */ + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + sNC.pAggInfo = &sAggInfo; + sAggInfo.mnReg = pParse->nMem+1; + sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0; + sAggInfo.pGroupBy = pGroupBy; + sqlite3ExprAnalyzeAggList(&sNC, pEList); + sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy); + if( pHaving ){ + sqlite3ExprAnalyzeAggregates(&sNC, pHaving); + } + sAggInfo.nAccumulator = sAggInfo.nColumn; + for(i=0; ix.pList); + sNC.ncFlags &= ~NC_InAggFunc; + } + sAggInfo.mxReg = pParse->nMem; + if( db->mallocFailed ) goto select_end; + + /* Processing for aggregates with GROUP BY is very different and + ** much more complex than aggregates without a GROUP BY. + */ + if( pGroupBy ){ + KeyInfo *pKeyInfo; /* Keying information for the group by clause */ + int j1; /* A-vs-B comparision jump */ + int addrOutputRow; /* Start of subroutine that outputs a result row */ + int regOutputRow; /* Return address register for output subroutine */ + int addrSetAbort; /* Set the abort flag and return */ + int addrTopOfLoop; /* Top of the input loop */ + int addrSortingIdx; /* The OP_OpenEphemeral for the sorting index */ + int addrReset; /* Subroutine for resetting the accumulator */ + int regReset; /* Return address register for reset subroutine */ + + /* If there is a GROUP BY clause we might need a sorting index to + ** implement it. Allocate that sorting index now. If it turns out + ** that we do not need it after all, the OP_SorterOpen instruction + ** will be converted into a Noop. */ - Table *pTab = 0; /* Table structure column is extracted from */ - Select *pS = 0; /* Select the column is extracted from */ - int iCol = pExpr->iColumn; /* Index of column in pTab */ - testcase( pExpr->op==TK_AGG_COLUMN ); - testcase( pExpr->op==TK_COLUMN ); - while( pNC && !pTab ){ - SrcList *pTabList = pNC->pSrcList; - for(j=0;jnSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++); - if( jnSrc ){ - pTab = pTabList->a[j].pTab; - pS = pTabList->a[j].pSelect; + sAggInfo.sortingIdx = pParse->nTab++; + pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0, 0); + addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen, + sAggInfo.sortingIdx, sAggInfo.nSortingColumn, + 0, (char*)pKeyInfo, P4_KEYINFO); + + /* Initialize memory locations used by GROUP BY aggregate processing + */ + iUseFlag = ++pParse->nMem; + iAbortFlag = ++pParse->nMem; + regOutputRow = ++pParse->nMem; + addrOutputRow = sqlite3VdbeMakeLabel(v); + regReset = ++pParse->nMem; + addrReset = sqlite3VdbeMakeLabel(v); + iAMem = pParse->nMem + 1; + pParse->nMem += pGroupBy->nExpr; + iBMem = pParse->nMem + 1; + pParse->nMem += pGroupBy->nExpr; + sqlite3VdbeAddOp2(v, OP_Integer, 0, iAbortFlag); + VdbeComment((v, "clear abort flag")); + sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag); + VdbeComment((v, "indicate accumulator empty")); + sqlite3VdbeAddOp3(v, OP_Null, 0, iAMem, iAMem+pGroupBy->nExpr-1); + + /* Begin a loop that will extract all source rows in GROUP BY order. + ** This might involve two separate loops with an OP_Sort in between, or + ** it might be a single loop that uses an index to extract information + ** in the right order to begin with. + */ + sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, + WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0 + ); + if( pWInfo==0 ) goto select_end; + if( sqlite3WhereIsOrdered(pWInfo)==pGroupBy->nExpr ){ + /* The optimizer is able to deliver rows in group by order so + ** we do not have to sort. The OP_OpenEphemeral table will be + ** cancelled later because we still need to use the pKeyInfo + */ + groupBySort = 0; + }else{ + /* Rows are coming out in undetermined order. We have to push + ** each row into a sorting index, terminate the first loop, + ** then loop over the sorting index in order to get the output + ** in sorted order + */ + int regBase; + int regRecord; + int nCol; + int nGroupBy; + + explainTempTable(pParse, + (sDistinct.isTnct && (p->selFlags&SF_Distinct)==0) ? + "DISTINCT" : "GROUP BY"); + + groupBySort = 1; + nGroupBy = pGroupBy->nExpr; + nCol = nGroupBy; + j = nGroupBy; + for(i=0; i=j ){ + nCol++; + j++; + } + } + regBase = sqlite3GetTempRange(pParse, nCol); + sqlite3ExprCacheClear(pParse); + sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0); + j = nGroupBy; + for(i=0; iiSorterColumn>=j ){ + int r1 = j + regBase; + int r2; + + r2 = sqlite3ExprCodeGetColumn(pParse, + pCol->pTab, pCol->iColumn, pCol->iTable, r1, 0); + if( r1!=r2 ){ + sqlite3VdbeAddOp2(v, OP_SCopy, r2, r1); + } + j++; + } + } + regRecord = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol, regRecord); + sqlite3VdbeAddOp2(v, OP_SorterInsert, sAggInfo.sortingIdx, regRecord); + sqlite3ReleaseTempReg(pParse, regRecord); + sqlite3ReleaseTempRange(pParse, regBase, nCol); + sqlite3WhereEnd(pWInfo); + sAggInfo.sortingIdxPTab = sortPTab = pParse->nTab++; + sortOut = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_OpenPseudo, sortPTab, sortOut, nCol); + sqlite3VdbeAddOp2(v, OP_SorterSort, sAggInfo.sortingIdx, addrEnd); + VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v); + sAggInfo.useSortingIdx = 1; + sqlite3ExprCacheClear(pParse); + + } + + /* If the index or temporary table used by the GROUP BY sort + ** will naturally deliver rows in the order required by the ORDER BY + ** clause, cancel the ephemeral table open coded earlier. + ** + ** This is an optimization - the correct answer should result regardless. + ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER to + ** disable this optimization for testing purposes. */ + if( orderByGrp && OptimizationEnabled(db, SQLITE_GroupByOrder) + && (groupBySort || sqlite3WhereIsSorted(pWInfo)) + ){ + sSort.pOrderBy = 0; + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); + } + + /* Evaluate the current GROUP BY terms and store in b0, b1, b2... + ** (b0 is memory location iBMem+0, b1 is iBMem+1, and so forth) + ** Then compare the current GROUP BY terms against the GROUP BY terms + ** from the previous row currently stored in a0, a1, a2... + */ + addrTopOfLoop = sqlite3VdbeCurrentAddr(v); + sqlite3ExprCacheClear(pParse); + if( groupBySort ){ + sqlite3VdbeAddOp3(v, OP_SorterData, sAggInfo.sortingIdx, sortOut,sortPTab); + } + for(j=0; jnExpr; j++){ + if( groupBySort ){ + sqlite3VdbeAddOp3(v, OP_Column, sortPTab, j, iBMem+j); }else{ - pNC = pNC->pNext; + sAggInfo.directMode = 1; + sqlite3ExprCode(pParse, pGroupBy->a[j].pExpr, iBMem+j); } } + sqlite3VdbeAddOp4(v, OP_Compare, iAMem, iBMem, pGroupBy->nExpr, + (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO); + j1 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp3(v, OP_Jump, j1+1, 0, j1+1); VdbeCoverage(v); - if( pTab==0 ){ - /* At one time, code such as "SELECT new.x" within a trigger would - ** cause this condition to run. Since then, we have restructured how - ** trigger code is generated and so this condition is no longer - ** possible. However, it can still be true for statements like - ** the following: + /* Generate code that runs whenever the GROUP BY changes. + ** Changes in the GROUP BY are detected by the previous code + ** block. If there were no changes, this block is skipped. + ** + ** This code copies current group by terms in b0,b1,b2,... + ** over to a0,a1,a2. It then calls the output subroutine + ** and resets the aggregate accumulator registers in preparation + ** for the next GROUP BY batch. + */ + sqlite3ExprCodeMove(pParse, iBMem, iAMem, pGroupBy->nExpr); + sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); + VdbeComment((v, "output one row")); + sqlite3VdbeAddOp2(v, OP_IfPos, iAbortFlag, addrEnd); VdbeCoverage(v); + VdbeComment((v, "check abort flag")); + sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + VdbeComment((v, "reset accumulator")); + + /* Update the aggregate accumulators based on the content of + ** the current row + */ + sqlite3VdbeJumpHere(v, j1); + updateAccumulator(pParse, &sAggInfo); + sqlite3VdbeAddOp2(v, OP_Integer, 1, iUseFlag); + VdbeComment((v, "indicate data in accumulator")); + + /* End of the loop + */ + if( groupBySort ){ + sqlite3VdbeAddOp2(v, OP_SorterNext, sAggInfo.sortingIdx, addrTopOfLoop); + VdbeCoverage(v); + }else{ + sqlite3WhereEnd(pWInfo); + sqlite3VdbeChangeToNoop(v, addrSortingIdx); + } + + /* Output the final row of result + */ + sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); + VdbeComment((v, "output final row")); + + /* Jump over the subroutines + */ + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEnd); + + /* Generate a subroutine that outputs a single row of the result + ** set. This subroutine first looks at the iUseFlag. If iUseFlag + ** is less than or equal to zero, the subroutine is a no-op. If + ** the processing calls for the query to abort, this subroutine + ** increments the iAbortFlag memory location before returning in + ** order to signal the caller to abort. + */ + addrSetAbort = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_Integer, 1, iAbortFlag); + VdbeComment((v, "set abort flag")); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + sqlite3VdbeResolveLabel(v, addrOutputRow); + addrOutputRow = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_IfPos, iUseFlag, addrOutputRow+2); VdbeCoverage(v); + VdbeComment((v, "Groupby result generator entry point")); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + finalizeAggFunctions(pParse, &sAggInfo); + sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); + selectInnerLoop(pParse, p, p->pEList, -1, &sSort, + &sDistinct, pDest, + addrOutputRow+1, addrSetAbort); + sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); + VdbeComment((v, "end groupby result generator")); + + /* Generate a subroutine that will reset the group-by accumulator + */ + sqlite3VdbeResolveLabel(v, addrReset); + resetAccumulator(pParse, &sAggInfo); + sqlite3VdbeAddOp1(v, OP_Return, regReset); + + } /* endif pGroupBy. Begin aggregate queries without GROUP BY: */ + else { + ExprList *pDel = 0; +#ifndef SQLITE_OMIT_BTREECOUNT + Table *pTab; + if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){ + /* If isSimpleCount() returns a pointer to a Table structure, then + ** the SQL statement is of the form: ** - ** CREATE TABLE t1(col INTEGER); - ** SELECT (SELECT t1.col) FROM FROM t1; + ** SELECT count(*) FROM ** - ** when columnType() is called on the expression "t1.col" in the - ** sub-select. In this case, set the column type to NULL, even - ** though it should really be "INTEGER". + ** where the Table structure returned represents table . ** - ** This is not a problem, as the column type of "t1.col" is never - ** used. When columnType() is called on the expression - ** "(SELECT t1.col)", the correct type is returned (see the TK_SELECT - ** branch below. */ - break; - } + ** This statement is so common that it is optimized specially. The + ** OP_Count instruction is executed either on the intkey table that + ** contains the data for table or on one of its indexes. It + ** is better to execute the op on an index, as indexes are almost + ** always spread across less pages than their corresponding tables. + */ + const int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + const int iCsr = pParse->nTab++; /* Cursor to scan b-tree */ + Index *pIdx; /* Iterator variable */ + KeyInfo *pKeyInfo = 0; /* Keyinfo for scanned index */ + Index *pBest = 0; /* Best index found so far */ + int iRoot = pTab->tnum; /* Root page of scanned b-tree */ - assert( pTab && pExpr->pTab==pTab ); - if( pS ){ - /* The "table" is actually a sub-select or a view in the FROM clause - ** of the SELECT statement. Return the declaration type and origin - ** data for the result-set column of the sub-select. + sqlite3CodeVerifySchema(pParse, iDb); + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + + /* Search for the index that has the lowest scan cost. + ** + ** (2011-04-15) Do not do a full scan of an unordered index. + ** + ** (2013-10-03) Do not count the entries in a partial index. + ** + ** In practice the KeyInfo structure will not be used. It is only + ** passed to keep OP_OpenRead happy. */ - if( iCol>=0 && ALWAYS(iColpEList->nExpr) ){ - /* If iCol is less than zero, then the expression requests the - ** rowid of the sub-select or view. This expression is legal (see - ** test case misc2.2.2) - it always evaluates to NULL. - */ - NameContext sNC; - Expr *p = pS->pEList->a[iCol].pExpr; - sNC.pSrcList = pS->pSrc; - sNC.pNext = pNC; - sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p, &zOriginDb, &zOriginTab, &zOriginCol); + if( !HasRowid(pTab) ) pBest = sqlite3PrimaryKeyIndex(pTab); + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->bUnordered==0 + && pIdx->szIdxRowszTabRow + && pIdx->pPartIdxWhere==0 + && (!pBest || pIdx->szIdxRowszIdxRow) + ){ + pBest = pIdx; + } } - }else if( ALWAYS(pTab->pSchema) ){ - /* A real table */ - assert( !pS ); - if( iCol<0 ) iCol = pTab->iPKey; - assert( iCol==-1 || (iCol>=0 && iColnCol) ); - if( iCol<0 ){ - zType = "INTEGER"; - zOriginCol = "rowid"; - }else{ - zType = pTab->aCol[iCol].zType; - zOriginCol = pTab->aCol[iCol].zName; + if( pBest ){ + iRoot = pBest->tnum; + pKeyInfo = sqlite3KeyInfoOfIndex(pParse, pBest); + } + + /* Open a read-only cursor, execute the OP_Count, close the cursor. */ + sqlite3VdbeAddOp4Int(v, OP_OpenRead, iCsr, iRoot, iDb, 1); + if( pKeyInfo ){ + sqlite3VdbeChangeP4(v, -1, (char *)pKeyInfo, P4_KEYINFO); + } + sqlite3VdbeAddOp2(v, OP_Count, iCsr, sAggInfo.aFunc[0].iMem); + sqlite3VdbeAddOp1(v, OP_Close, iCsr); + explainSimpleCount(pParse, pTab, pBest); + }else +#endif /* SQLITE_OMIT_BTREECOUNT */ + { + /* Check if the query is of one of the following forms: + ** + ** SELECT min(x) FROM ... + ** SELECT max(x) FROM ... + ** + ** If it is, then ask the code in where.c to attempt to sort results + ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause. + ** If where.c is able to produce results sorted in this order, then + ** add vdbe code to break out of the processing loop after the + ** first iteration (since the first iteration of the loop is + ** guaranteed to operate on the row with the minimum or maximum + ** value of x, the only row required). + ** + ** A special flag must be passed to sqlite3WhereBegin() to slightly + ** modify behavior as follows: + ** + ** + If the query is a "SELECT min(x)", then the loop coded by + ** where.c should not iterate over any values with a NULL value + ** for x. + ** + ** + The optimizer code in where.c (the thing that decides which + ** index or indices to use) should place a different priority on + ** satisfying the 'ORDER BY' clause than it does in other cases. + ** Refer to code and comments in where.c for details. + */ + ExprList *pMinMax = 0; + u8 flag = WHERE_ORDERBY_NORMAL; + + assert( p->pGroupBy==0 ); + assert( flag==0 ); + if( p->pHaving==0 ){ + flag = minMaxQuery(&sAggInfo, &pMinMax); + } + assert( flag==0 || (pMinMax!=0 && pMinMax->nExpr==1) ); + + if( flag ){ + pMinMax = sqlite3ExprListDup(db, pMinMax, 0); + pDel = pMinMax; + if( pMinMax && !db->mallocFailed ){ + pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0; + pMinMax->a[0].pExpr->op = TK_COLUMN; + } + } + + /* This case runs if the aggregate has no GROUP BY clause. The + ** processing is much simpler since there is only a single row + ** of output. + */ + resetAccumulator(pParse, &sAggInfo); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMax,0,flag,0); + if( pWInfo==0 ){ + sqlite3ExprListDelete(db, pDel); + goto select_end; } - zOriginTab = pTab->zName; - if( pNC->pParse ){ - int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema); - zOriginDb = pNC->pParse->db->aDb[iDb].zName; + updateAccumulator(pParse, &sAggInfo); + assert( pMinMax==0 || pMinMax->nExpr==1 ); + if( sqlite3WhereIsOrdered(pWInfo)>0 ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, sqlite3WhereBreakLabel(pWInfo)); + VdbeComment((v, "%s() by index", + (flag==WHERE_ORDERBY_MIN?"min":"max"))); } + sqlite3WhereEnd(pWInfo); + finalizeAggFunctions(pParse, &sAggInfo); } - break; - } -#ifndef SQLITE_OMIT_SUBQUERY - case TK_SELECT: { - /* The expression is a sub-select. Return the declaration type and - ** origin info for the single column in the result set of the SELECT - ** statement. - */ - NameContext sNC; - Select *pS = pExpr->x.pSelect; - Expr *p = pS->pEList->a[0].pExpr; - assert( ExprHasProperty(pExpr, EP_xIsSelect) ); - sNC.pSrcList = pS->pSrc; - sNC.pNext = pNC; - sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p, &zOriginDb, &zOriginTab, &zOriginCol); - break; + + sSort.pOrderBy = 0; + sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); + selectInnerLoop(pParse, p, p->pEList, -1, 0, 0, + pDest, addrEnd, addrEnd); + sqlite3ExprListDelete(db, pDel); } -#endif + sqlite3VdbeResolveLabel(v, addrEnd); + + } /* endif aggregate query */ + + if( sDistinct.eTnctType==WHERE_DISTINCT_UNORDERED ){ + explainTempTable(pParse, "DISTINCT"); } - - if( pzOriginDb ){ - assert( pzOriginTab && pzOriginCol ); - *pzOriginDb = zOriginDb; - *pzOriginTab = zOriginTab; - *pzOriginCol = zOriginCol; + + /* If there is an ORDER BY clause, then we need to sort the results + ** and send them to the callback one by one. + */ + if( sSort.pOrderBy ){ + explainTempTable(pParse, sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY"); + generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest); } - return zType; -} -/* -** Generate code that will tell the VDBE the declaration types of columns -** in the result set. -*/ -static void generateColumnTypes( - Parse *pParse, /* Parser context */ - SrcList *pTabList, /* List of tables */ - ExprList *pEList /* Expressions defining the result set */ -){ -#ifndef SQLITE_OMIT_DECLTYPE - Vdbe *v = pParse->pVdbe; - int i; - NameContext sNC; - sNC.pSrcList = pTabList; - sNC.pParse = pParse; - for(i=0; inExpr; i++){ - Expr *p = pEList->a[i].pExpr; - const char *zType; -#ifdef SQLITE_ENABLE_COLUMN_METADATA - const char *zOrigDb = 0; - const char *zOrigTab = 0; - const char *zOrigCol = 0; - zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); + /* Jump here to skip this query + */ + sqlite3VdbeResolveLabel(v, iEnd); - /* The vdbe must make its own copy of the column-type and other - ** column specific strings, in case the schema is reset before this - ** virtual machine is deleted. - */ - sqlite3VdbeSetColName(v, i, COLNAME_DATABASE, zOrigDb, SQLITE_TRANSIENT); - sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT); - sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT); -#else - zType = columnType(&sNC, p, 0, 0, 0); -#endif - sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT); - } -#endif /* SQLITE_OMIT_DECLTYPE */ -} + /* The SELECT was successfully coded. Set the return code to 0 + ** to indicate no errors. + */ + rc = 0; -/* -** Generate code that will tell the VDBE the names of columns -** in the result set. This information is used to provide the -** azCol[] values in the callback. -*/ -static void generateColumnNames( - Parse *pParse, /* Parser context */ - SrcList *pTabList, /* List of tables */ - ExprList *pEList /* Expressions defining the result set */ -){ - Vdbe *v = pParse->pVdbe; - int i, j; - sqlite3 *db = pParse->db; - int fullNames, shortNames; + /* Control jumps to here if an error is encountered above, or upon + ** successful coding of the SELECT. + */ +select_end: + explainSetInteger(pParse->iSelectId, iRestoreSelectId); -#ifndef SQLITE_OMIT_EXPLAIN - /* If this is an EXPLAIN, skip this step */ - if( pParse->explain ){ - return; + /* Identify column names if results of the SELECT are to be output. + */ + if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){ + generateColumnNames(pParse, pTabList, pEList); } + + sqlite3DbFree(db, sAggInfo.aCol); + sqlite3DbFree(db, sAggInfo.aFunc); +#if SELECTTRACE_ENABLED + SELECTTRACE(1,pParse,p,("end processing\n")); + pParse->nSelectIndent--; #endif + return rc; +} - if( pParse->colNamesSet || NEVER(v==0) || db->mallocFailed ) return; - pParse->colNamesSet = 1; - fullNames = (db->flags & SQLITE_FullColNames)!=0; - shortNames = (db->flags & SQLITE_ShortColNames)!=0; - sqlite3VdbeSetNumCols(v, pEList->nExpr); - for(i=0; inExpr; i++){ - Expr *p; - p = pEList->a[i].pExpr; - if( NEVER(p==0) ) continue; - if( pEList->a[i].zName ){ - char *zName = pEList->a[i].zName; - sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT); - }else if( (p->op==TK_COLUMN || p->op==TK_AGG_COLUMN) && pTabList ){ - Table *pTab; - char *zCol; - int iCol = p->iColumn; - for(j=0; ALWAYS(jnSrc); j++){ - if( pTabList->a[j].iCursor==p->iTable ) break; +#ifdef SQLITE_DEBUG +/* +** Generate a human-readable description of a the Select object. +*/ +SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){ + int n = 0; + pView = sqlite3TreeViewPush(pView, moreToFollow); + sqlite3TreeViewLine(pView, "SELECT%s%s", + ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""), + ((p->selFlags & SF_Aggregate) ? " agg_flag" : "") + ); + if( p->pSrc && p->pSrc->nSrc ) n++; + if( p->pWhere ) n++; + if( p->pGroupBy ) n++; + if( p->pHaving ) n++; + if( p->pOrderBy ) n++; + if( p->pLimit ) n++; + if( p->pOffset ) n++; + if( p->pPrior ) n++; + sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set"); + if( p->pSrc && p->pSrc->nSrc ){ + int i; + pView = sqlite3TreeViewPush(pView, (n--)>0); + sqlite3TreeViewLine(pView, "FROM"); + for(i=0; ipSrc->nSrc; i++){ + struct SrcList_item *pItem = &p->pSrc->a[i]; + StrAccum x; + char zLine[100]; + sqlite3StrAccumInit(&x, zLine, sizeof(zLine), 0); + sqlite3XPrintf(&x, 0, "{%d,*}", pItem->iCursor); + if( pItem->zDatabase ){ + sqlite3XPrintf(&x, 0, " %s.%s", pItem->zDatabase, pItem->zName); + }else if( pItem->zName ){ + sqlite3XPrintf(&x, 0, " %s", pItem->zName); } - assert( jnSrc ); - pTab = pTabList->a[j].pTab; - if( iCol<0 ) iCol = pTab->iPKey; - assert( iCol==-1 || (iCol>=0 && iColnCol) ); - if( iCol<0 ){ - zCol = "rowid"; - }else{ - zCol = pTab->aCol[iCol].zName; + if( pItem->pTab ){ + sqlite3XPrintf(&x, 0, " tabname=%Q", pItem->pTab->zName); } - if( !shortNames && !fullNames ){ - sqlite3VdbeSetColName(v, i, COLNAME_NAME, - sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC); - }else if( fullNames ){ - char *zName = 0; - zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol); - sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC); - }else{ - sqlite3VdbeSetColName(v, i, COLNAME_NAME, zCol, SQLITE_TRANSIENT); + if( pItem->zAlias ){ + sqlite3XPrintf(&x, 0, " (AS %s)", pItem->zAlias); } - }else{ - sqlite3VdbeSetColName(v, i, COLNAME_NAME, - sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC); + if( pItem->jointype & JT_LEFT ){ + sqlite3XPrintf(&x, 0, " LEFT-JOIN"); + } + sqlite3StrAccumFinish(&x); + sqlite3TreeViewItem(pView, zLine, ipSrc->nSrc-1); + if( pItem->pSelect ){ + sqlite3TreeViewSelect(pView, pItem->pSelect, 0); + } + sqlite3TreeViewPop(pView); } + sqlite3TreeViewPop(pView); } - generateColumnTypes(pParse, pTabList, pEList); + if( p->pWhere ){ + sqlite3TreeViewItem(pView, "WHERE", (n--)>0); + sqlite3TreeViewExpr(pView, p->pWhere, 0); + sqlite3TreeViewPop(pView); + } + if( p->pGroupBy ){ + sqlite3TreeViewExprList(pView, p->pGroupBy, (n--)>0, "GROUPBY"); + } + if( p->pHaving ){ + sqlite3TreeViewItem(pView, "HAVING", (n--)>0); + sqlite3TreeViewExpr(pView, p->pHaving, 0); + sqlite3TreeViewPop(pView); + } + if( p->pOrderBy ){ + sqlite3TreeViewExprList(pView, p->pOrderBy, (n--)>0, "ORDERBY"); + } + if( p->pLimit ){ + sqlite3TreeViewItem(pView, "LIMIT", (n--)>0); + sqlite3TreeViewExpr(pView, p->pLimit, 0); + sqlite3TreeViewPop(pView); + } + if( p->pOffset ){ + sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); + sqlite3TreeViewExpr(pView, p->pOffset, 0); + sqlite3TreeViewPop(pView); + } + if( p->pPrior ){ + const char *zOp = "UNION"; + switch( p->op ){ + case TK_ALL: zOp = "UNION ALL"; break; + case TK_INTERSECT: zOp = "INTERSECT"; break; + case TK_EXCEPT: zOp = "EXCEPT"; break; + } + sqlite3TreeViewItem(pView, zOp, (n--)>0); + sqlite3TreeViewSelect(pView, p->pPrior, 0); + sqlite3TreeViewPop(pView); + } + sqlite3TreeViewPop(pView); } +#endif /* SQLITE_DEBUG */ +/************** End of select.c **********************************************/ +/************** Begin file table.c *******************************************/ /* -** Given a an expression list (which is really the list of expressions -** that form the result set of a SELECT statement) compute appropriate -** column names for a table that would hold the expression list. +** 2001 September 15 ** -** All column names will be unique. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** Only the column names are computed. Column.zType, Column.zColl, -** and other fields of Column are zeroed. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** Return SQLITE_OK on success. If a memory allocation error occurs, -** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM. +************************************************************************* +** This file contains the sqlite3_get_table() and sqlite3_free_table() +** interface routines. These are just wrappers around the main +** interface routine of sqlite3_exec(). +** +** These routines are in a separate files so that they will not be linked +** if they are not used. */ -static int selectColumnsFromExprList( - Parse *pParse, /* Parsing context */ - ExprList *pEList, /* Expr list from which to derive column names */ - int *pnCol, /* Write the number of columns here */ - Column **paCol /* Write the new column list here */ -){ - sqlite3 *db = pParse->db; /* Database connection */ - int i, j; /* Loop counters */ - int cnt; /* Index added to make the name unique */ - Column *aCol, *pCol; /* For looping over result columns */ - int nCol; /* Number of columns in the result set */ - Expr *p; /* Expression for a single result column */ - char *zName; /* Column name */ - int nName; /* Size of name in zName[] */ - - *pnCol = nCol = pEList->nExpr; - aCol = *paCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol); - if( aCol==0 ) return SQLITE_NOMEM; - for(i=0, pCol=aCol; ia[i].pExpr; - assert( p->pRight==0 || ExprHasProperty(p->pRight, EP_IntValue) - || p->pRight->u.zToken==0 || p->pRight->u.zToken[0]!=0 ); - if( (zName = pEList->a[i].zName)!=0 ){ - /* If the column contains an "AS " phrase, use as the name */ - zName = sqlite3DbStrDup(db, zName); - }else{ - Expr *pColExpr = p; /* The expression that is the result column name */ - Table *pTab; /* Table associated with this expression */ - while( pColExpr->op==TK_DOT ) pColExpr = pColExpr->pRight; - if( pColExpr->op==TK_COLUMN && ALWAYS(pColExpr->pTab!=0) ){ - /* For columns use the column name name */ - int iCol = pColExpr->iColumn; - pTab = pColExpr->pTab; - if( iCol<0 ) iCol = pTab->iPKey; - zName = sqlite3MPrintf(db, "%s", - iCol>=0 ? pTab->aCol[iCol].zName : "rowid"); - }else if( pColExpr->op==TK_ID ){ - assert( !ExprHasProperty(pColExpr, EP_IntValue) ); - zName = sqlite3MPrintf(db, "%s", pColExpr->u.zToken); - }else{ - /* Use the original text of the column expression as its name */ - zName = sqlite3MPrintf(db, "%s", pEList->a[i].zSpan); - } - } - if( db->mallocFailed ){ - sqlite3DbFree(db, zName); - break; - } +/* #include */ +/* #include */ - /* Make sure the column name is unique. If the name is not unique, - ** append a integer to the name so that it becomes unique. - */ - nName = sqlite3Strlen30(zName); - for(j=cnt=0; jzName = zName; - } - if( db->mallocFailed ){ - for(j=0; jdb; - NameContext sNC; - Column *pCol; - CollSeq *pColl; - int i; - Expr *p; - struct ExprList_item *a; - - assert( pSelect!=0 ); - assert( (pSelect->selFlags & SF_Resolved)!=0 ); - assert( nCol==pSelect->pEList->nExpr || db->mallocFailed ); - if( db->mallocFailed ) return; - memset(&sNC, 0, sizeof(sNC)); - sNC.pSrcList = pSelect->pSrc; - a = pSelect->pEList->a; - for(i=0, pCol=aCol; izType = sqlite3DbStrDup(db, columnType(&sNC, p, 0, 0, 0)); - pCol->affinity = sqlite3ExprAffinity(p); - if( pCol->affinity==0 ) pCol->affinity = SQLITE_AFF_NONE; - pColl = sqlite3ExprCollSeq(pParse, p); - if( pColl ){ - pCol->zColl = sqlite3DbStrDup(db, pColl->zName); - } - } -} +typedef struct TabResult { + char **azResult; /* Accumulated output */ + char *zErrMsg; /* Error message text, if an error occurs */ + u32 nAlloc; /* Slots allocated for azResult[] */ + u32 nRow; /* Number of rows in the result */ + u32 nColumn; /* Number of columns in the result */ + u32 nData; /* Slots used in azResult[]. (nRow+1)*nColumn */ + int rc; /* Return code from sqlite3_exec() */ +} TabResult; /* -** Given a SELECT statement, generate a Table structure that describes -** the result set of that SELECT. +** This routine is called once for each row in the result table. Its job +** is to fill in the TabResult structure appropriately, allocating new +** memory as necessary. */ -SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect){ - Table *pTab; - sqlite3 *db = pParse->db; - int savedFlags; +static int sqlite3_get_table_cb(void *pArg, int nCol, char **argv, char **colv){ + TabResult *p = (TabResult*)pArg; /* Result accumulator */ + int need; /* Slots needed in p->azResult[] */ + int i; /* Loop counter */ + char *z; /* A single column of result */ - savedFlags = db->flags; - db->flags &= ~SQLITE_FullColNames; - db->flags |= SQLITE_ShortColNames; - sqlite3SelectPrep(pParse, pSelect, 0); - if( pParse->nErr ) return 0; - while( pSelect->pPrior ) pSelect = pSelect->pPrior; - db->flags = savedFlags; - pTab = sqlite3DbMallocZero(db, sizeof(Table) ); - if( pTab==0 ){ - return 0; + /* Make sure there is enough space in p->azResult to hold everything + ** we need to remember from this invocation of the callback. + */ + if( p->nRow==0 && argv!=0 ){ + need = nCol*2; + }else{ + need = nCol; } - /* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside - ** is disabled */ - assert( db->lookaside.bEnabled==0 ); - pTab->nRef = 1; - pTab->zName = 0; - pTab->nRowEst = 1000000; - selectColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol); - selectAddColumnTypeAndCollation(pParse, pTab->nCol, pTab->aCol, pSelect); - pTab->iPKey = -1; - if( db->mallocFailed ){ - sqlite3DeleteTable(db, pTab); - return 0; + if( p->nData + need > p->nAlloc ){ + char **azNew; + p->nAlloc = p->nAlloc*2 + need; + azNew = sqlite3_realloc64( p->azResult, sizeof(char*)*p->nAlloc ); + if( azNew==0 ) goto malloc_failed; + p->azResult = azNew; } - return pTab; -} -/* -** Get a VDBE for the given parser context. Create a new one if necessary. -** If an error occurs, return NULL and leave a message in pParse. -*/ -SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ - Vdbe *v = pParse->pVdbe; - if( v==0 ){ - v = pParse->pVdbe = sqlite3VdbeCreate(pParse->db); -#ifndef SQLITE_OMIT_TRACE - if( v ){ - sqlite3VdbeAddOp0(v, OP_Trace); + /* If this is the first row, then generate an extra row containing + ** the names of all columns. + */ + if( p->nRow==0 ){ + p->nColumn = nCol; + for(i=0; iazResult[p->nData++] = z; } -#endif + }else if( (int)p->nColumn!=nCol ){ + sqlite3_free(p->zErrMsg); + p->zErrMsg = sqlite3_mprintf( + "sqlite3_get_table() called with two or more incompatible queries" + ); + p->rc = SQLITE_ERROR; + return 1; } - return v; -} + /* Copy over the row data + */ + if( argv!=0 ){ + for(i=0; iazResult[p->nData++] = z; + } + p->nRow++; + } + return 0; + +malloc_failed: + p->rc = SQLITE_NOMEM; + return 1; +} /* -** Compute the iLimit and iOffset fields of the SELECT based on the -** pLimit and pOffset expressions. pLimit and pOffset hold the expressions -** that appear in the original SQL statement after the LIMIT and OFFSET -** keywords. Or NULL if those keywords are omitted. iLimit and iOffset -** are the integer memory register numbers for counters used to compute -** the limit and offset. If there is no limit and/or offset, then -** iLimit and iOffset are negative. +** Query the database. But instead of invoking a callback for each row, +** malloc() for space to hold the result and return the entire results +** at the conclusion of the call. ** -** This routine changes the values of iLimit and iOffset only if -** a limit or offset is defined by pLimit and pOffset. iLimit and -** iOffset should have been preset to appropriate default values -** (usually but not always -1) prior to calling this routine. -** Only if pLimit!=0 or pOffset!=0 do the limit registers get -** redefined. The UNION ALL operator uses this property to force -** the reuse of the same limit and offset registers across multiple -** SELECT statements. +** The result that is written to ***pazResult is held in memory obtained +** from malloc(). But the caller cannot free this memory directly. +** Instead, the entire table should be passed to sqlite3_free_table() when +** the calling procedure is finished using it. */ -static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ - Vdbe *v = 0; - int iLimit = 0; - int iOffset; - int addr1, n; - if( p->iLimit ) return; +SQLITE_API int sqlite3_get_table( + sqlite3 *db, /* The database on which the SQL executes */ + const char *zSql, /* The SQL to be executed */ + char ***pazResult, /* Write the result table here */ + int *pnRow, /* Write the number of rows in the result here */ + int *pnColumn, /* Write the number of columns of result here */ + char **pzErrMsg /* Write error messages here */ +){ + int rc; + TabResult res; - /* - ** "LIMIT -1" always shows all rows. There is some - ** contraversy about what the correct behavior should be. - ** The current implementation interprets "LIMIT 0" to mean - ** no rows. - */ - sqlite3ExprCacheClear(pParse); - assert( p->pOffset==0 || p->pLimit!=0 ); - if( p->pLimit ){ - p->iLimit = iLimit = ++pParse->nMem; - v = sqlite3GetVdbe(pParse); - if( NEVER(v==0) ) return; /* VDBE should have already been allocated */ - if( sqlite3ExprIsInteger(p->pLimit, &n) ){ - sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit); - VdbeComment((v, "LIMIT counter")); - if( n==0 ){ - sqlite3VdbeAddOp2(v, OP_Goto, 0, iBreak); - }else{ - if( p->nSelectRow > (double)n ) p->nSelectRow = (double)n; + *pazResult = 0; + if( pnColumn ) *pnColumn = 0; + if( pnRow ) *pnRow = 0; + if( pzErrMsg ) *pzErrMsg = 0; + res.zErrMsg = 0; + res.nRow = 0; + res.nColumn = 0; + res.nData = 1; + res.nAlloc = 20; + res.rc = SQLITE_OK; + res.azResult = sqlite3_malloc(sizeof(char*)*res.nAlloc ); + if( res.azResult==0 ){ + db->errCode = SQLITE_NOMEM; + return SQLITE_NOMEM; + } + res.azResult[0] = 0; + rc = sqlite3_exec(db, zSql, sqlite3_get_table_cb, &res, pzErrMsg); + assert( sizeof(res.azResult[0])>= sizeof(res.nData) ); + res.azResult[0] = SQLITE_INT_TO_PTR(res.nData); + if( (rc&0xff)==SQLITE_ABORT ){ + sqlite3_free_table(&res.azResult[1]); + if( res.zErrMsg ){ + if( pzErrMsg ){ + sqlite3_free(*pzErrMsg); + *pzErrMsg = sqlite3_mprintf("%s",res.zErrMsg); } - }else{ - sqlite3ExprCode(pParse, p->pLimit, iLimit); - sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); - VdbeComment((v, "LIMIT counter")); - sqlite3VdbeAddOp2(v, OP_IfZero, iLimit, iBreak); - } - if( p->pOffset ){ - p->iOffset = iOffset = ++pParse->nMem; - pParse->nMem++; /* Allocate an extra register for limit+offset */ - sqlite3ExprCode(pParse, p->pOffset, iOffset); - sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); - VdbeComment((v, "OFFSET counter")); - addr1 = sqlite3VdbeAddOp1(v, OP_IfPos, iOffset); - sqlite3VdbeAddOp2(v, OP_Integer, 0, iOffset); - sqlite3VdbeJumpHere(v, addr1); - sqlite3VdbeAddOp3(v, OP_Add, iLimit, iOffset, iOffset+1); - VdbeComment((v, "LIMIT+OFFSET")); - addr1 = sqlite3VdbeAddOp1(v, OP_IfPos, iLimit); - sqlite3VdbeAddOp2(v, OP_Integer, -1, iOffset+1); - sqlite3VdbeJumpHere(v, addr1); + sqlite3_free(res.zErrMsg); } + db->errCode = res.rc; /* Assume 32-bit assignment is atomic */ + return res.rc; + } + sqlite3_free(res.zErrMsg); + if( rc!=SQLITE_OK ){ + sqlite3_free_table(&res.azResult[1]); + return rc; + } + if( res.nAlloc>res.nData ){ + char **azNew; + azNew = sqlite3_realloc( res.azResult, sizeof(char*)*res.nData ); + if( azNew==0 ){ + sqlite3_free_table(&res.azResult[1]); + db->errCode = SQLITE_NOMEM; + return SQLITE_NOMEM; + } + res.azResult = azNew; } + *pazResult = &res.azResult[1]; + if( pnColumn ) *pnColumn = res.nColumn; + if( pnRow ) *pnRow = res.nRow; + return rc; } -#ifndef SQLITE_OMIT_COMPOUND_SELECT /* -** Return the appropriate collating sequence for the iCol-th column of -** the result set for the compound-select statement "p". Return NULL if -** the column has no default collating sequence. -** -** The collating sequence for the compound select is taken from the -** left-most term of the select that has a collating sequence. +** This routine frees the space the sqlite3_get_table() malloced. */ -static CollSeq *multiSelectCollSeq(Parse *pParse, Select *p, int iCol){ - CollSeq *pRet; - if( p->pPrior ){ - pRet = multiSelectCollSeq(pParse, p->pPrior, iCol); - }else{ - pRet = 0; - } - assert( iCol>=0 ); - if( pRet==0 && iColpEList->nExpr ){ - pRet = sqlite3ExprCollSeq(pParse, p->pEList->a[iCol].pExpr); +SQLITE_API void sqlite3_free_table( + char **azResult /* Result returned from sqlite3_get_table() */ +){ + if( azResult ){ + int i, n; + azResult--; + assert( azResult!=0 ); + n = SQLITE_PTR_TO_INT(azResult[0]); + for(i=1; ipPrior. The left query could also be a compound query -** in which case this routine will be called recursively. -** -** The results of the total query are to be written into a destination -** of type eDest with parameter iParm. -** -** Example 1: Consider a three-way compound SQL statement. -** -** SELECT a FROM t1 UNION SELECT b FROM t2 UNION SELECT c FROM t3 -** -** This statement is parsed up as follows: -** -** SELECT c FROM t3 -** | -** `-----> SELECT b FROM t2 -** | -** `------> SELECT a FROM t1 +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** The arrows in the diagram above represent the Select.pPrior pointer. -** So if this routine is called with p equal to the t3 query, then -** pPrior will be the t2 query. p->op will be TK_UNION in this case. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** Notice that because of the way SQLite parses compound SELECTs, the -** individual selects always group from left to right. +************************************************************************* +** This file contains the implementation for TRIGGERs */ -static int multiSelect( - Parse *pParse, /* Parsing context */ - Select *p, /* The right-most of SELECTs to be coded */ - SelectDest *pDest /* What to do with query results */ -){ - int rc = SQLITE_OK; /* Success code from a subroutine */ - Select *pPrior; /* Another SELECT immediately to our left */ - Vdbe *v; /* Generate code to this VDBE */ - SelectDest dest; /* Alternative data destination */ - Select *pDelete = 0; /* Chain of simple selects to delete */ - sqlite3 *db; /* Database connection */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1; /* EQP id of left-hand query */ - int iSub2; /* EQP id of right-hand query */ -#endif - /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs. Only - ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT. - */ - assert( p && p->pPrior ); /* Calling function guarantees this much */ - db = pParse->db; - pPrior = p->pPrior; - assert( pPrior->pRightmost!=pPrior ); - assert( pPrior->pRightmost==p->pRightmost ); - dest = *pDest; - if( pPrior->pOrderBy ){ - sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before", - selectOpName(p->op)); - rc = 1; - goto multi_select_end; - } - if( pPrior->pLimit ){ - sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before", - selectOpName(p->op)); - rc = 1; - goto multi_select_end; - } +#ifndef SQLITE_OMIT_TRIGGER +/* +** Delete a linked list of TriggerStep structures. +*/ +SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3 *db, TriggerStep *pTriggerStep){ + while( pTriggerStep ){ + TriggerStep * pTmp = pTriggerStep; + pTriggerStep = pTriggerStep->pNext; - v = sqlite3GetVdbe(pParse); - assert( v!=0 ); /* The VDBE already created by calling function */ + sqlite3ExprDelete(db, pTmp->pWhere); + sqlite3ExprListDelete(db, pTmp->pExprList); + sqlite3SelectDelete(db, pTmp->pSelect); + sqlite3IdListDelete(db, pTmp->pIdList); - /* Create the destination temporary table if necessary - */ - if( dest.eDest==SRT_EphemTab ){ - assert( p->pEList ); - sqlite3VdbeAddOp2(v, OP_OpenEphemeral, dest.iParm, p->pEList->nExpr); - sqlite3VdbeChangeP5(v, BTREE_UNORDERED); - dest.eDest = SRT_Table; + sqlite3DbFree(db, pTmp); } +} - /* Make sure all SELECTs in the statement have the same number of elements - ** in their result sets. - */ - assert( p->pEList && pPrior->pEList ); - if( p->pEList->nExpr!=pPrior->pEList->nExpr ){ - sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s" - " do not have the same number of result columns", selectOpName(p->op)); - rc = 1; - goto multi_select_end; - } +/* +** Given table pTab, return a list of all the triggers attached to +** the table. The list is connected by Trigger.pNext pointers. +** +** All of the triggers on pTab that are in the same database as pTab +** are already attached to pTab->pTrigger. But there might be additional +** triggers on pTab in the TEMP schema. This routine prepends all +** TEMP triggers on pTab to the beginning of the pTab->pTrigger list +** and returns the combined list. +** +** To state it another way: This routine returns a list of all triggers +** that fire off of pTab. The list will include any TEMP triggers on +** pTab as well as the triggers lised in pTab->pTrigger. +*/ +SQLITE_PRIVATE Trigger *sqlite3TriggerList(Parse *pParse, Table *pTab){ + Schema * const pTmpSchema = pParse->db->aDb[1].pSchema; + Trigger *pList = 0; /* List of triggers to return */ - /* Compound SELECTs that have an ORDER BY clause are handled separately. - */ - if( p->pOrderBy ){ - return multiSelectOrderBy(pParse, p, pDest); + if( pParse->disableTriggers ){ + return 0; } - /* Generate code for the left and right SELECT statements. - */ - switch( p->op ){ - case TK_ALL: { - int addr = 0; - int nLimit; - assert( !pPrior->pLimit ); - pPrior->pLimit = p->pLimit; - pPrior->pOffset = p->pOffset; - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &dest); - p->pLimit = 0; - p->pOffset = 0; - if( rc ){ - goto multi_select_end; - } - p->pPrior = 0; - p->iLimit = pPrior->iLimit; - p->iOffset = pPrior->iOffset; - if( p->iLimit ){ - addr = sqlite3VdbeAddOp1(v, OP_IfZero, p->iLimit); - VdbeComment((v, "Jump ahead if LIMIT reached")); - } - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &dest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->nSelectRow += pPrior->nSelectRow; - if( pPrior->pLimit - && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit) - && p->nSelectRow > (double)nLimit + if( pTmpSchema!=pTab->pSchema ){ + HashElem *p; + assert( sqlite3SchemaMutexHeld(pParse->db, 0, pTmpSchema) ); + for(p=sqliteHashFirst(&pTmpSchema->trigHash); p; p=sqliteHashNext(p)){ + Trigger *pTrig = (Trigger *)sqliteHashData(p); + if( pTrig->pTabSchema==pTab->pSchema + && 0==sqlite3StrICmp(pTrig->table, pTab->zName) ){ - p->nSelectRow = (double)nLimit; - } - if( addr ){ - sqlite3VdbeJumpHere(v, addr); + pTrig->pNext = (pList ? pList : pTab->pTrigger); + pList = pTrig; } - break; } - case TK_EXCEPT: - case TK_UNION: { - int unionTab; /* Cursor number of the temporary table holding result */ - u8 op = 0; /* One of the SRT_ operations to apply to self */ - int priorOp; /* The SRT_ operation to apply to prior selects */ - Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */ - int addr; - SelectDest uniondest; - - testcase( p->op==TK_EXCEPT ); - testcase( p->op==TK_UNION ); - priorOp = SRT_Union; - if( dest.eDest==priorOp && ALWAYS(!p->pLimit &&!p->pOffset) ){ - /* We can reuse a temporary table generated by a SELECT to our - ** right. - */ - assert( p->pRightmost!=p ); /* Can only happen for leftward elements - ** of a 3-way or more compound */ - assert( p->pLimit==0 ); /* Not allowed on leftward elements */ - assert( p->pOffset==0 ); /* Not allowed on leftward elements */ - unionTab = dest.iParm; - }else{ - /* We will need to create our own temporary table to hold the - ** intermediate results. - */ - unionTab = pParse->nTab++; - assert( p->pOrderBy==0 ); - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); - assert( p->addrOpenEphm[0] == -1 ); - p->addrOpenEphm[0] = addr; - p->pRightmost->selFlags |= SF_UsesEphemeral; - assert( p->pEList ); - } + } - /* Code the SELECT statements to our left - */ - assert( !pPrior->pOrderBy ); - sqlite3SelectDestInit(&uniondest, priorOp, unionTab); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &uniondest); - if( rc ){ - goto multi_select_end; - } + return (pList ? pList : pTab->pTrigger); +} - /* Code the current SELECT statement - */ - if( p->op==TK_EXCEPT ){ - op = SRT_Except; - }else{ - assert( p->op==TK_UNION ); - op = SRT_Union; - } - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - uniondest.eDest = op; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &uniondest); - testcase( rc!=SQLITE_OK ); - /* Query flattening in sqlite3Select() might refill p->pOrderBy. - ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ - sqlite3ExprListDelete(db, p->pOrderBy); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->pOrderBy = 0; - if( p->op==TK_UNION ) p->nSelectRow += pPrior->nSelectRow; - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; - p->iLimit = 0; - p->iOffset = 0; +/* +** This is called by the parser when it sees a CREATE TRIGGER statement +** up to the point of the BEGIN before the trigger actions. A Trigger +** structure is generated based on the information available and stored +** in pParse->pNewTrigger. After the trigger actions have been parsed, the +** sqlite3FinishTrigger() function is called to complete the trigger +** construction process. +*/ +SQLITE_PRIVATE void sqlite3BeginTrigger( + Parse *pParse, /* The parse context of the CREATE TRIGGER statement */ + Token *pName1, /* The name of the trigger */ + Token *pName2, /* The name of the trigger */ + int tr_tm, /* One of TK_BEFORE, TK_AFTER, TK_INSTEAD */ + int op, /* One of TK_INSERT, TK_UPDATE, TK_DELETE */ + IdList *pColumns, /* column list if this is an UPDATE OF trigger */ + SrcList *pTableName,/* The name of the table/view the trigger applies to */ + Expr *pWhen, /* WHEN clause */ + int isTemp, /* True if the TEMPORARY keyword is present */ + int noErr /* Suppress errors if the trigger already exists */ +){ + Trigger *pTrigger = 0; /* The new trigger */ + Table *pTab; /* Table that the trigger fires off of */ + char *zName = 0; /* Name of the trigger */ + sqlite3 *db = pParse->db; /* The database connection */ + int iDb; /* The database to store the trigger in */ + Token *pName; /* The unqualified db name */ + DbFixer sFix; /* State vector for the DB fixer */ + int iTabDb; /* Index of the database holding pTab */ - /* Convert the data in the temporary table into whatever form - ** it is that we currently need. - */ - assert( unionTab==dest.iParm || dest.eDest!=priorOp ); - if( dest.eDest!=priorOp ){ - int iCont, iBreak, iStart; - assert( p->pEList ); - if( dest.eDest==SRT_Output ){ - Select *pFirst = p; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, 0, pFirst->pEList); - } - iBreak = sqlite3VdbeMakeLabel(v); - iCont = sqlite3VdbeMakeLabel(v); - computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); - iStart = sqlite3VdbeCurrentAddr(v); - selectInnerLoop(pParse, p, p->pEList, unionTab, p->pEList->nExpr, - 0, -1, &dest, iCont, iBreak); - sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); - sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); - } - break; + assert( pName1!=0 ); /* pName1->z might be NULL, but not pName1 itself */ + assert( pName2!=0 ); + assert( op==TK_INSERT || op==TK_UPDATE || op==TK_DELETE ); + assert( op>0 && op<0xff ); + if( isTemp ){ + /* If TEMP was specified, then the trigger name may not be qualified. */ + if( pName2->n>0 ){ + sqlite3ErrorMsg(pParse, "temporary trigger may not have qualified name"); + goto trigger_cleanup; } - default: assert( p->op==TK_INTERSECT ); { - int tab1, tab2; - int iCont, iBreak, iStart; - Expr *pLimit, *pOffset; - int addr; - SelectDest intersectdest; - int r1; + iDb = 1; + pName = pName1; + }else{ + /* Figure out the db that the trigger will be created in */ + iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); + if( iDb<0 ){ + goto trigger_cleanup; + } + } + if( !pTableName || db->mallocFailed ){ + goto trigger_cleanup; + } - /* INTERSECT is different from the others since it requires - ** two temporary tables. Hence it has its own case. Begin - ** by allocating the tables we will need. - */ - tab1 = pParse->nTab++; - tab2 = pParse->nTab++; - assert( p->pOrderBy==0 ); + /* A long-standing parser bug is that this syntax was allowed: + ** + ** CREATE TRIGGER attached.demo AFTER INSERT ON attached.tab .... + ** ^^^^^^^^ + ** + ** To maintain backwards compatibility, ignore the database + ** name on pTableName if we are reparsing out of SQLITE_MASTER. + */ + if( db->init.busy && iDb!=1 ){ + sqlite3DbFree(db, pTableName->a[0].zDatabase); + pTableName->a[0].zDatabase = 0; + } - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); - assert( p->addrOpenEphm[0] == -1 ); - p->addrOpenEphm[0] = addr; - p->pRightmost->selFlags |= SF_UsesEphemeral; - assert( p->pEList ); + /* If the trigger name was unqualified, and the table is a temp table, + ** then set iDb to 1 to create the trigger in the temporary database. + ** If sqlite3SrcListLookup() returns 0, indicating the table does not + ** exist, the error is caught by the block below. + */ + pTab = sqlite3SrcListLookup(pParse, pTableName); + if( db->init.busy==0 && pName2->n==0 && pTab + && pTab->pSchema==db->aDb[1].pSchema ){ + iDb = 1; + } - /* Code the SELECTs to our left into temporary table "tab1". + /* Ensure the table name matches database name and that the table exists */ + if( db->mallocFailed ) goto trigger_cleanup; + assert( pTableName->nSrc==1 ); + sqlite3FixInit(&sFix, pParse, iDb, "trigger", pName); + if( sqlite3FixSrcList(&sFix, pTableName) ){ + goto trigger_cleanup; + } + pTab = sqlite3SrcListLookup(pParse, pTableName); + if( !pTab ){ + /* The table does not exist. */ + if( db->init.iDb==1 ){ + /* Ticket #3810. + ** Normally, whenever a table is dropped, all associated triggers are + ** dropped too. But if a TEMP trigger is created on a non-TEMP table + ** and the table is dropped by a different database connection, the + ** trigger is not visible to the database connection that does the + ** drop so the trigger cannot be dropped. This results in an + ** "orphaned trigger" - a trigger whose associated table is missing. */ - sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &intersectdest); - if( rc ){ - goto multi_select_end; - } + db->init.orphanTrigger = 1; + } + goto trigger_cleanup; + } + if( IsVirtual(pTab) ){ + sqlite3ErrorMsg(pParse, "cannot create triggers on virtual tables"); + goto trigger_cleanup; + } - /* Code the current SELECT into temporary table "tab2" - */ - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); - assert( p->addrOpenEphm[1] == -1 ); - p->addrOpenEphm[1] = addr; - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - intersectdest.iParm = tab2; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &intersectdest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; + /* Check that the trigger name is not reserved and that no trigger of the + ** specified name exists */ + zName = sqlite3NameFromToken(db, pName); + if( !zName || SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ + goto trigger_cleanup; + } + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash),zName) ){ + if( !noErr ){ + sqlite3ErrorMsg(pParse, "trigger %T already exists", pName); + }else{ + assert( !db->init.busy ); + sqlite3CodeVerifySchema(pParse, iDb); + } + goto trigger_cleanup; + } - /* Generate code to take the intersection of the two temporary - ** tables. - */ - assert( p->pEList ); - if( dest.eDest==SRT_Output ){ - Select *pFirst = p; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, 0, pFirst->pEList); - } - iBreak = sqlite3VdbeMakeLabel(v); - iCont = sqlite3VdbeMakeLabel(v); - computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); - r1 = sqlite3GetTempReg(pParse); - iStart = sqlite3VdbeAddOp2(v, OP_RowKey, tab1, r1); - sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); - sqlite3ReleaseTempReg(pParse, r1); - selectInnerLoop(pParse, p, p->pEList, tab1, p->pEList->nExpr, - 0, -1, &dest, iCont, iBreak); - sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); - sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); - sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); - break; + /* Do not create a trigger on a system table */ + if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 ){ + sqlite3ErrorMsg(pParse, "cannot create trigger on system table"); + pParse->nErr++; + goto trigger_cleanup; + } + + /* INSTEAD of triggers are only for views and views only support INSTEAD + ** of triggers. + */ + if( pTab->pSelect && tr_tm!=TK_INSTEAD ){ + sqlite3ErrorMsg(pParse, "cannot create %s trigger on view: %S", + (tr_tm == TK_BEFORE)?"BEFORE":"AFTER", pTableName, 0); + goto trigger_cleanup; + } + if( !pTab->pSelect && tr_tm==TK_INSTEAD ){ + sqlite3ErrorMsg(pParse, "cannot create INSTEAD OF" + " trigger on table: %S", pTableName, 0); + goto trigger_cleanup; + } + iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); + +#ifndef SQLITE_OMIT_AUTHORIZATION + { + int code = SQLITE_CREATE_TRIGGER; + const char *zDb = db->aDb[iTabDb].zName; + const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb; + if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER; + if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){ + goto trigger_cleanup; } + if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iTabDb),0,zDb)){ + goto trigger_cleanup; + } + } +#endif + + /* INSTEAD OF triggers can only appear on views and BEFORE triggers + ** cannot appear on views. So we might as well translate every + ** INSTEAD OF trigger into a BEFORE trigger. It simplifies code + ** elsewhere. + */ + if (tr_tm == TK_INSTEAD){ + tr_tm = TK_BEFORE; } - explainComposite(pParse, p->op, iSub1, iSub2, p->op!=TK_ALL); + /* Build the Trigger object */ + pTrigger = (Trigger*)sqlite3DbMallocZero(db, sizeof(Trigger)); + if( pTrigger==0 ) goto trigger_cleanup; + pTrigger->zName = zName; + zName = 0; + pTrigger->table = sqlite3DbStrDup(db, pTableName->a[0].zName); + pTrigger->pSchema = db->aDb[iDb].pSchema; + pTrigger->pTabSchema = pTab->pSchema; + pTrigger->op = (u8)op; + pTrigger->tr_tm = tr_tm==TK_BEFORE ? TRIGGER_BEFORE : TRIGGER_AFTER; + pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); + pTrigger->pColumns = sqlite3IdListDup(db, pColumns); + assert( pParse->pNewTrigger==0 ); + pParse->pNewTrigger = pTrigger; - /* Compute collating sequences used by - ** temporary tables needed to implement the compound select. - ** Attach the KeyInfo structure to all temporary tables. - ** - ** This section is run by the right-most SELECT statement only. - ** SELECT statements to the left always skip this part. The right-most - ** SELECT might also skip this part if it has no ORDER BY clause and - ** no temp tables are required. - */ - if( p->selFlags & SF_UsesEphemeral ){ - int i; /* Loop counter */ - KeyInfo *pKeyInfo; /* Collating sequence for the result set */ - Select *pLoop; /* For looping through SELECT statements */ - CollSeq **apColl; /* For looping through pKeyInfo->aColl[] */ - int nCol; /* Number of columns in result set */ +trigger_cleanup: + sqlite3DbFree(db, zName); + sqlite3SrcListDelete(db, pTableName); + sqlite3IdListDelete(db, pColumns); + sqlite3ExprDelete(db, pWhen); + if( !pParse->pNewTrigger ){ + sqlite3DeleteTrigger(db, pTrigger); + }else{ + assert( pParse->pNewTrigger==pTrigger ); + } +} - assert( p->pRightmost==p ); - nCol = p->pEList->nExpr; - pKeyInfo = sqlite3DbMallocZero(db, - sizeof(*pKeyInfo)+nCol*(sizeof(CollSeq*) + 1)); - if( !pKeyInfo ){ - rc = SQLITE_NOMEM; - goto multi_select_end; - } +/* +** This routine is called after all of the trigger actions have been parsed +** in order to complete the process of building the trigger. +*/ +SQLITE_PRIVATE void sqlite3FinishTrigger( + Parse *pParse, /* Parser context */ + TriggerStep *pStepList, /* The triggered program */ + Token *pAll /* Token that describes the complete CREATE TRIGGER */ +){ + Trigger *pTrig = pParse->pNewTrigger; /* Trigger being finished */ + char *zName; /* Name of trigger */ + sqlite3 *db = pParse->db; /* The database */ + DbFixer sFix; /* Fixer object */ + int iDb; /* Database containing the trigger */ + Token nameToken; /* Trigger name for error reporting */ - pKeyInfo->enc = ENC(db); - pKeyInfo->nField = (u16)nCol; + pParse->pNewTrigger = 0; + if( NEVER(pParse->nErr) || !pTrig ) goto triggerfinish_cleanup; + zName = pTrig->zName; + iDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema); + pTrig->step_list = pStepList; + while( pStepList ){ + pStepList->pTrig = pTrig; + pStepList = pStepList->pNext; + } + nameToken.z = pTrig->zName; + nameToken.n = sqlite3Strlen30(nameToken.z); + sqlite3FixInit(&sFix, pParse, iDb, "trigger", &nameToken); + if( sqlite3FixTriggerStep(&sFix, pTrig->step_list) + || sqlite3FixExpr(&sFix, pTrig->pWhen) + ){ + goto triggerfinish_cleanup; + } - for(i=0, apColl=pKeyInfo->aColl; ipDfltColl; - } - } + /* if we are not initializing, + ** build the sqlite_master entry + */ + if( !db->init.busy ){ + Vdbe *v; + char *z; - for(pLoop=p; pLoop; pLoop=pLoop->pPrior){ - for(i=0; i<2; i++){ - int addr = pLoop->addrOpenEphm[i]; - if( addr<0 ){ - /* If [0] is unused then [1] is also unused. So we can - ** always safely abort as soon as the first unused slot is found */ - assert( pLoop->addrOpenEphm[1]<0 ); - break; - } - sqlite3VdbeChangeP2(v, addr, nCol); - sqlite3VdbeChangeP4(v, addr, (char*)pKeyInfo, P4_KEYINFO); - pLoop->addrOpenEphm[i] = -1; - } + /* Make an entry in the sqlite_master table */ + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto triggerfinish_cleanup; + sqlite3BeginWriteOperation(pParse, 0, iDb); + z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n); + sqlite3NestedParse(pParse, + "INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')", + db->aDb[iDb].zName, SCHEMA_TABLE(iDb), zName, + pTrig->table, z); + sqlite3DbFree(db, z); + sqlite3ChangeCookie(pParse, iDb); + sqlite3VdbeAddParseSchemaOp(v, iDb, + sqlite3MPrintf(db, "type='trigger' AND name='%q'", zName)); + } + + if( db->init.busy ){ + Trigger *pLink = pTrig; + Hash *pHash = &db->aDb[iDb].pSchema->trigHash; + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pTrig = sqlite3HashInsert(pHash, zName, pTrig); + if( pTrig ){ + db->mallocFailed = 1; + }else if( pLink->pSchema==pLink->pTabSchema ){ + Table *pTab; + pTab = sqlite3HashFind(&pLink->pTabSchema->tblHash, pLink->table); + assert( pTab!=0 ); + pLink->pNext = pTab->pTrigger; + pTab->pTrigger = pLink; } - sqlite3DbFree(db, pKeyInfo); } -multi_select_end: - pDest->iMem = dest.iMem; - pDest->nMem = dest.nMem; - sqlite3SelectDelete(db, pDelete); - return rc; +triggerfinish_cleanup: + sqlite3DeleteTrigger(db, pTrig); + assert( !pParse->pNewTrigger ); + sqlite3DeleteTriggerStep(db, pStepList); } -#endif /* SQLITE_OMIT_COMPOUND_SELECT */ /* -** Code an output subroutine for a coroutine implementation of a -** SELECT statment. -** -** The data to be output is contained in pIn->iMem. There are -** pIn->nMem columns to be output. pDest is where the output should -** be sent. -** -** regReturn is the number of the register holding the subroutine -** return address. +** Turn a SELECT statement (that the pSelect parameter points to) into +** a trigger step. Return a pointer to a TriggerStep structure. ** -** If regPrev>0 then it is the first register in a vector that -** records the previous output. mem[regPrev] is a flag that is false -** if there has been no previous output. If regPrev>0 then code is -** generated to suppress duplicates. pKeyInfo is used for comparing -** keys. +** The parser calls this routine when it finds a SELECT statement in +** body of a TRIGGER. +*/ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelect){ + TriggerStep *pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep)); + if( pTriggerStep==0 ) { + sqlite3SelectDelete(db, pSelect); + return 0; + } + pTriggerStep->op = TK_SELECT; + pTriggerStep->pSelect = pSelect; + pTriggerStep->orconf = OE_Default; + return pTriggerStep; +} + +/* +** Allocate space to hold a new trigger step. The allocated space +** holds both the TriggerStep object and the TriggerStep.target.z string. ** -** If the LIMIT found in p->iLimit is reached, jump immediately to -** iBreak. +** If an OOM error occurs, NULL is returned and db->mallocFailed is set. */ -static int generateOutputSubroutine( - Parse *pParse, /* Parsing context */ - Select *p, /* The SELECT statement */ - SelectDest *pIn, /* Coroutine supplying data */ - SelectDest *pDest, /* Where to send the data */ - int regReturn, /* The return address register */ - int regPrev, /* Previous result register. No uniqueness if 0 */ - KeyInfo *pKeyInfo, /* For comparing with previous entry */ - int p4type, /* The p4 type for pKeyInfo */ - int iBreak /* Jump here if we hit the LIMIT */ +static TriggerStep *triggerStepAllocate( + sqlite3 *db, /* Database connection */ + u8 op, /* Trigger opcode */ + Token *pName /* The target name */ ){ - Vdbe *v = pParse->pVdbe; - int iContinue; - int addr; - - addr = sqlite3VdbeCurrentAddr(v); - iContinue = sqlite3VdbeMakeLabel(v); + TriggerStep *pTriggerStep; - /* Suppress duplicates for UNION, EXCEPT, and INTERSECT - */ - if( regPrev ){ - int j1, j2; - j1 = sqlite3VdbeAddOp1(v, OP_IfNot, regPrev); - j2 = sqlite3VdbeAddOp4(v, OP_Compare, pIn->iMem, regPrev+1, pIn->nMem, - (char*)pKeyInfo, p4type); - sqlite3VdbeAddOp3(v, OP_Jump, j2+2, iContinue, j2+2); - sqlite3VdbeJumpHere(v, j1); - sqlite3ExprCodeCopy(pParse, pIn->iMem, regPrev+1, pIn->nMem); - sqlite3VdbeAddOp2(v, OP_Integer, 1, regPrev); + pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep) + pName->n); + if( pTriggerStep ){ + char *z = (char*)&pTriggerStep[1]; + memcpy(z, pName->z, pName->n); + pTriggerStep->target.z = z; + pTriggerStep->target.n = pName->n; + pTriggerStep->op = op; } - if( pParse->db->mallocFailed ) return 0; - - /* Suppress the the first OFFSET entries if there is an OFFSET clause - */ - codeOffset(v, p, iContinue); + return pTriggerStep; +} - switch( pDest->eDest ){ - /* Store the result as data using a unique key. - */ - case SRT_Table: - case SRT_EphemTab: { - int r1 = sqlite3GetTempReg(pParse); - int r2 = sqlite3GetTempReg(pParse); - testcase( pDest->eDest==SRT_Table ); - testcase( pDest->eDest==SRT_EphemTab ); - sqlite3VdbeAddOp3(v, OP_MakeRecord, pIn->iMem, pIn->nMem, r1); - sqlite3VdbeAddOp2(v, OP_NewRowid, pDest->iParm, r2); - sqlite3VdbeAddOp3(v, OP_Insert, pDest->iParm, r1, r2); - sqlite3VdbeChangeP5(v, OPFLAG_APPEND); - sqlite3ReleaseTempReg(pParse, r2); - sqlite3ReleaseTempReg(pParse, r1); - break; - } +/* +** Build a trigger step out of an INSERT statement. Return a pointer +** to the new trigger step. +** +** The parser calls this routine when it sees an INSERT inside the +** body of a trigger. +*/ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep( + sqlite3 *db, /* The database connection */ + Token *pTableName, /* Name of the table into which we insert */ + IdList *pColumn, /* List of columns in pTableName to insert into */ + Select *pSelect, /* A SELECT statement that supplies values */ + u8 orconf /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ +){ + TriggerStep *pTriggerStep; -#ifndef SQLITE_OMIT_SUBQUERY - /* If we are creating a set for an "expr IN (SELECT ...)" construct, - ** then there should be a single item on the stack. Write this - ** item into the set table with bogus data. - */ - case SRT_Set: { - int r1; - assert( pIn->nMem==1 ); - p->affinity = - sqlite3CompareAffinity(p->pEList->a[0].pExpr, pDest->affinity); - r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iMem, 1, r1, &p->affinity, 1); - sqlite3ExprCacheAffinityChange(pParse, pIn->iMem, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iParm, r1); - sqlite3ReleaseTempReg(pParse, r1); - break; - } + assert(pSelect != 0 || db->mallocFailed); -#if 0 /* Never occurs on an ORDER BY query */ - /* If any row exist in the result set, record that fact and abort. - */ - case SRT_Exists: { - sqlite3VdbeAddOp2(v, OP_Integer, 1, pDest->iParm); - /* The LIMIT clause will terminate the loop for us */ - break; - } -#endif + pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName); + if( pTriggerStep ){ + pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + pTriggerStep->pIdList = pColumn; + pTriggerStep->orconf = orconf; + }else{ + sqlite3IdListDelete(db, pColumn); + } + sqlite3SelectDelete(db, pSelect); - /* If this is a scalar select that is part of an expression, then - ** store the results in the appropriate memory cell and break out - ** of the scan loop. - */ - case SRT_Mem: { - assert( pIn->nMem==1 ); - sqlite3ExprCodeMove(pParse, pIn->iMem, pDest->iParm, 1); - /* The LIMIT clause will jump out of the loop for us */ - break; - } -#endif /* #ifndef SQLITE_OMIT_SUBQUERY */ + return pTriggerStep; +} - /* The results are stored in a sequence of registers - ** starting at pDest->iMem. Then the co-routine yields. - */ - case SRT_Coroutine: { - if( pDest->iMem==0 ){ - pDest->iMem = sqlite3GetTempRange(pParse, pIn->nMem); - pDest->nMem = pIn->nMem; - } - sqlite3ExprCodeMove(pParse, pIn->iMem, pDest->iMem, pDest->nMem); - sqlite3VdbeAddOp1(v, OP_Yield, pDest->iParm); - break; - } +/* +** Construct a trigger step that implements an UPDATE statement and return +** a pointer to that trigger step. The parser calls this routine when it +** sees an UPDATE statement inside the body of a CREATE TRIGGER. +*/ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep( + sqlite3 *db, /* The database connection */ + Token *pTableName, /* Name of the table to be updated */ + ExprList *pEList, /* The SET clause: list of column and new values */ + Expr *pWhere, /* The WHERE clause */ + u8 orconf /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ +){ + TriggerStep *pTriggerStep; - /* If none of the above, then the result destination must be - ** SRT_Output. This routine is never called with any other - ** destination other than the ones handled above or SRT_Output. - ** - ** For SRT_Output, results are stored in a sequence of registers. - ** Then the OP_ResultRow opcode is used to cause sqlite3_step() to - ** return the next row of result. - */ - default: { - assert( pDest->eDest==SRT_Output ); - sqlite3VdbeAddOp2(v, OP_ResultRow, pIn->iMem, pIn->nMem); - sqlite3ExprCacheAffinityChange(pParse, pIn->iMem, pIn->nMem); - break; - } + pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName); + if( pTriggerStep ){ + pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); + pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + pTriggerStep->orconf = orconf; } + sqlite3ExprListDelete(db, pEList); + sqlite3ExprDelete(db, pWhere); + return pTriggerStep; +} - /* Jump to the end of the loop if the LIMIT is reached. - */ - if( p->iLimit ){ - sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); - } +/* +** Construct a trigger step that implements a DELETE statement and return +** a pointer to that trigger step. The parser calls this routine when it +** sees a DELETE statement inside the body of a CREATE TRIGGER. +*/ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep( + sqlite3 *db, /* Database connection */ + Token *pTableName, /* The table from which rows are deleted */ + Expr *pWhere /* The WHERE clause */ +){ + TriggerStep *pTriggerStep; - /* Generate the subroutine return - */ - sqlite3VdbeResolveLabel(v, iContinue); - sqlite3VdbeAddOp1(v, OP_Return, regReturn); + pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName); + if( pTriggerStep ){ + pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + pTriggerStep->orconf = OE_Default; + } + sqlite3ExprDelete(db, pWhere); + return pTriggerStep; +} - return addr; +/* +** Recursively delete a Trigger structure +*/ +SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3 *db, Trigger *pTrigger){ + if( pTrigger==0 ) return; + sqlite3DeleteTriggerStep(db, pTrigger->step_list); + sqlite3DbFree(db, pTrigger->zName); + sqlite3DbFree(db, pTrigger->table); + sqlite3ExprDelete(db, pTrigger->pWhen); + sqlite3IdListDelete(db, pTrigger->pColumns); + sqlite3DbFree(db, pTrigger); } /* -** Alternative compound select code generator for cases when there -** is an ORDER BY clause. -** -** We assume a query of the following form: -** -** ORDER BY -** -** is one of UNION ALL, UNION, EXCEPT, or INTERSECT. The idea -** is to code both and with the ORDER BY clause as -** co-routines. Then run the co-routines in parallel and merge the results -** into the output. In addition to the two coroutines (called selectA and -** selectB) there are 7 subroutines: -** -** outA: Move the output of the selectA coroutine into the output -** of the compound query. -** -** outB: Move the output of the selectB coroutine into the output -** of the compound query. (Only generated for UNION and -** UNION ALL. EXCEPT and INSERTSECT never output a row that -** appears only in B.) -** -** AltB: Called when there is data from both coroutines and AB. -** -** EofA: Called when data is exhausted from selectA. -** -** EofB: Called when data is exhausted from selectB. -** -** The implementation of the latter five subroutines depend on which -** is used: -** -** -** UNION ALL UNION EXCEPT INTERSECT -** ------------- ----------------- -------------- ----------------- -** AltB: outA, nextA outA, nextA outA, nextA nextA -** -** AeqB: outA, nextA nextA nextA outA, nextA -** -** AgtB: outB, nextB outB, nextB nextB nextB -** -** EofA: outB, nextB outB, nextB halt halt -** -** EofB: outA, nextA outA, nextA outA, nextA halt -** -** In the AltB, AeqB, and AgtB subroutines, an EOF on A following nextA -** causes an immediate jump to EofA and an EOF on B following nextB causes -** an immediate jump to EofB. Within EofA and EofB, and EOF on entry or -** following nextX causes a jump to the end of the select processing. -** -** Duplicate removal in the UNION, EXCEPT, and INTERSECT cases is handled -** within the output subroutine. The regPrev register set holds the previously -** output value. A comparison is made against this value and the output -** is skipped if the next results would be the same as the previous. -** -** The implementation plan is to implement the two coroutines and seven -** subroutines first, then put the control logic at the bottom. Like this: -** -** goto Init -** coA: coroutine for left query (A) -** coB: coroutine for right query (B) -** outA: output one row of A -** outB: output one row of B (UNION and UNION ALL only) -** EofA: ... -** EofB: ... -** AltB: ... -** AeqB: ... -** AgtB: ... -** Init: initialize coroutine registers -** yield coA -** if eof(A) goto EofA -** yield coB -** if eof(B) goto EofB -** Cmpr: Compare A, B -** Jump AltB, AeqB, AgtB -** End: ... +** This function is called to drop a trigger from the database schema. ** -** We call AltB, AeqB, AgtB, EofA, and EofB "subroutines" but they are not -** actually called using Gosub and they do not Return. EofA and EofB loop -** until all data is exhausted then jump to the "end" labe. AltB, AeqB, -** and AgtB jump to either L2 or to one of EofA or EofB. -*/ -#ifndef SQLITE_OMIT_COMPOUND_SELECT -static int multiSelectOrderBy( - Parse *pParse, /* Parsing context */ - Select *p, /* The right-most of SELECTs to be coded */ - SelectDest *pDest /* What to do with query results */ -){ - int i, j; /* Loop counters */ - Select *pPrior; /* Another SELECT immediately to our left */ - Vdbe *v; /* Generate code to this VDBE */ - SelectDest destA; /* Destination for coroutine A */ - SelectDest destB; /* Destination for coroutine B */ - int regAddrA; /* Address register for select-A coroutine */ - int regEofA; /* Flag to indicate when select-A is complete */ - int regAddrB; /* Address register for select-B coroutine */ - int regEofB; /* Flag to indicate when select-B is complete */ - int addrSelectA; /* Address of the select-A coroutine */ - int addrSelectB; /* Address of the select-B coroutine */ - int regOutA; /* Address register for the output-A subroutine */ - int regOutB; /* Address register for the output-B subroutine */ - int addrOutA; /* Address of the output-A subroutine */ - int addrOutB = 0; /* Address of the output-B subroutine */ - int addrEofA; /* Address of the select-A-exhausted subroutine */ - int addrEofB; /* Address of the select-B-exhausted subroutine */ - int addrAltB; /* Address of the AB subroutine */ - int regLimitA; /* Limit register for select-A */ - int regLimitB; /* Limit register for select-A */ - int regPrev; /* A range of registers to hold previous output */ - int savedLimit; /* Saved value of p->iLimit */ - int savedOffset; /* Saved value of p->iOffset */ - int labelCmpr; /* Label for the start of the merge algorithm */ - int labelEnd; /* Label for the end of the overall SELECT stmt */ - int j1; /* Jump instructions that get retargetted */ - int op; /* One of TK_ALL, TK_UNION, TK_EXCEPT, TK_INTERSECT */ - KeyInfo *pKeyDup = 0; /* Comparison information for duplicate removal */ - KeyInfo *pKeyMerge; /* Comparison information for merging rows */ - sqlite3 *db; /* Database connection */ - ExprList *pOrderBy; /* The ORDER BY clause */ - int nOrderBy; /* Number of terms in the ORDER BY clause */ - int *aPermute; /* Mapping from ORDER BY terms to result set columns */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1; /* EQP id of left-hand query */ - int iSub2; /* EQP id of right-hand query */ -#endif +** This may be called directly from the parser and therefore identifies +** the trigger by name. The sqlite3DropTriggerPtr() routine does the +** same job as this routine except it takes a pointer to the trigger +** instead of the trigger name. +**/ +SQLITE_PRIVATE void sqlite3DropTrigger(Parse *pParse, SrcList *pName, int noErr){ + Trigger *pTrigger = 0; + int i; + const char *zDb; + const char *zName; + sqlite3 *db = pParse->db; + + if( db->mallocFailed ) goto drop_trigger_cleanup; + if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + goto drop_trigger_cleanup; + } + + assert( pName->nSrc==1 ); + zDb = pName->a[0].zDatabase; + zName = pName->a[0].zName; + assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) ); + for(i=OMIT_TEMPDB; inDb; i++){ + int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ + if( zDb && sqlite3StrICmp(db->aDb[j].zName, zDb) ) continue; + assert( sqlite3SchemaMutexHeld(db, j, 0) ); + pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName); + if( pTrigger ) break; + } + if( !pTrigger ){ + if( !noErr ){ + sqlite3ErrorMsg(pParse, "no such trigger: %S", pName, 0); + }else{ + sqlite3CodeVerifyNamedSchema(pParse, zDb); + } + pParse->checkSchema = 1; + goto drop_trigger_cleanup; + } + sqlite3DropTriggerPtr(pParse, pTrigger); - assert( p->pOrderBy!=0 ); - assert( pKeyDup==0 ); /* "Managed" code needs this. Ticket #3382. */ - db = pParse->db; - v = pParse->pVdbe; - assert( v!=0 ); /* Already thrown the error if VDBE alloc failed */ - labelEnd = sqlite3VdbeMakeLabel(v); - labelCmpr = sqlite3VdbeMakeLabel(v); +drop_trigger_cleanup: + sqlite3SrcListDelete(db, pName); +} +/* +** Return a pointer to the Table structure for the table that a trigger +** is set on. +*/ +static Table *tableOfTrigger(Trigger *pTrigger){ + return sqlite3HashFind(&pTrigger->pTabSchema->tblHash, pTrigger->table); +} - /* Patch up the ORDER BY clause - */ - op = p->op; - pPrior = p->pPrior; - assert( pPrior->pOrderBy==0 ); - pOrderBy = p->pOrderBy; - assert( pOrderBy ); - nOrderBy = pOrderBy->nExpr; - /* For operators other than UNION ALL we have to make sure that - ** the ORDER BY clause covers every term of the result set. Add - ** terms to the ORDER BY clause as necessary. - */ - if( op!=TK_ALL ){ - for(i=1; db->mallocFailed==0 && i<=p->pEList->nExpr; i++){ - struct ExprList_item *pItem; - for(j=0, pItem=pOrderBy->a; jiCol>0 ); - if( pItem->iCol==i ) break; - } - if( j==nOrderBy ){ - Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0); - if( pNew==0 ) return SQLITE_NOMEM; - pNew->flags |= EP_IntValue; - pNew->u.iValue = i; - pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew); - pOrderBy->a[nOrderBy++].iCol = (u16)i; - } +/* +** Drop a trigger given a pointer to that trigger. +*/ +SQLITE_PRIVATE void sqlite3DropTriggerPtr(Parse *pParse, Trigger *pTrigger){ + Table *pTable; + Vdbe *v; + sqlite3 *db = pParse->db; + int iDb; + + iDb = sqlite3SchemaToIndex(pParse->db, pTrigger->pSchema); + assert( iDb>=0 && iDbnDb ); + pTable = tableOfTrigger(pTrigger); + assert( pTable ); + assert( pTable->pSchema==pTrigger->pSchema || iDb==1 ); +#ifndef SQLITE_OMIT_AUTHORIZATION + { + int code = SQLITE_DROP_TRIGGER; + const char *zDb = db->aDb[iDb].zName; + const char *zTab = SCHEMA_TABLE(iDb); + if( iDb==1 ) code = SQLITE_DROP_TEMP_TRIGGER; + if( sqlite3AuthCheck(pParse, code, pTrigger->zName, pTable->zName, zDb) || + sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){ + return; } } +#endif - /* Compute the comparison permutation and keyinfo that is used with - ** the permutation used to determine if the next - ** row of results comes from selectA or selectB. Also add explicit - ** collations to the ORDER BY clause terms so that when the subqueries - ** to the right and the left are evaluated, they use the correct - ** collation. + /* Generate code to destroy the database record of the trigger. */ - aPermute = sqlite3DbMallocRaw(db, sizeof(int)*nOrderBy); - if( aPermute ){ - struct ExprList_item *pItem; - for(i=0, pItem=pOrderBy->a; iiCol>0 && pItem->iCol<=p->pEList->nExpr ); - aPermute[i] = pItem->iCol - 1; - } - pKeyMerge = - sqlite3DbMallocRaw(db, sizeof(*pKeyMerge)+nOrderBy*(sizeof(CollSeq*)+1)); - if( pKeyMerge ){ - pKeyMerge->aSortOrder = (u8*)&pKeyMerge->aColl[nOrderBy]; - pKeyMerge->nField = (u16)nOrderBy; - pKeyMerge->enc = ENC(db); - for(i=0; ia[i].pExpr; - if( pTerm->flags & EP_ExpCollate ){ - pColl = pTerm->pColl; - }else{ - pColl = multiSelectCollSeq(pParse, p, aPermute[i]); - pTerm->flags |= EP_ExpCollate; - pTerm->pColl = pColl; - } - pKeyMerge->aColl[i] = pColl; - pKeyMerge->aSortOrder[i] = pOrderBy->a[i].sortOrder; - } + assert( pTable!=0 ); + if( (v = sqlite3GetVdbe(pParse))!=0 ){ + int base; + static const int iLn = VDBE_OFFSET_LINENO(2); + static const VdbeOpList dropTrigger[] = { + { OP_Rewind, 0, ADDR(9), 0}, + { OP_String8, 0, 1, 0}, /* 1 */ + { OP_Column, 0, 1, 2}, + { OP_Ne, 2, ADDR(8), 1}, + { OP_String8, 0, 1, 0}, /* 4: "trigger" */ + { OP_Column, 0, 0, 2}, + { OP_Ne, 2, ADDR(8), 1}, + { OP_Delete, 0, 0, 0}, + { OP_Next, 0, ADDR(1), 0}, /* 8 */ + }; + + sqlite3BeginWriteOperation(pParse, 0, iDb); + sqlite3OpenMasterTable(pParse, iDb); + base = sqlite3VdbeAddOpList(v, ArraySize(dropTrigger), dropTrigger, iLn); + sqlite3VdbeChangeP4(v, base+1, pTrigger->zName, P4_TRANSIENT); + sqlite3VdbeChangeP4(v, base+4, "trigger", P4_STATIC); + sqlite3ChangeCookie(pParse, iDb); + sqlite3VdbeAddOp2(v, OP_Close, 0, 0); + sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0); + if( pParse->nMem<3 ){ + pParse->nMem = 3; } - }else{ - pKeyMerge = 0; } +} - /* Reattach the ORDER BY clause to the query. - */ - p->pOrderBy = pOrderBy; - pPrior->pOrderBy = sqlite3ExprListDup(pParse->db, pOrderBy, 0); +/* +** Remove a trigger from the hash tables of the sqlite* pointer. +*/ +SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3 *db, int iDb, const char *zName){ + Trigger *pTrigger; + Hash *pHash; - /* Allocate a range of temporary registers and the KeyInfo needed - ** for the logic that removes duplicate result rows when the - ** operator is UNION, EXCEPT, or INTERSECT (but not UNION ALL). - */ - if( op==TK_ALL ){ - regPrev = 0; - }else{ - int nExpr = p->pEList->nExpr; - assert( nOrderBy>=nExpr || db->mallocFailed ); - regPrev = sqlite3GetTempRange(pParse, nExpr+1); - sqlite3VdbeAddOp2(v, OP_Integer, 0, regPrev); - pKeyDup = sqlite3DbMallocZero(db, - sizeof(*pKeyDup) + nExpr*(sizeof(CollSeq*)+1) ); - if( pKeyDup ){ - pKeyDup->aSortOrder = (u8*)&pKeyDup->aColl[nExpr]; - pKeyDup->nField = (u16)nExpr; - pKeyDup->enc = ENC(db); - for(i=0; iaColl[i] = multiSelectCollSeq(pParse, p, i); - pKeyDup->aSortOrder[i] = 0; - } + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + pHash = &(db->aDb[iDb].pSchema->trigHash); + pTrigger = sqlite3HashInsert(pHash, zName, 0); + if( ALWAYS(pTrigger) ){ + if( pTrigger->pSchema==pTrigger->pTabSchema ){ + Table *pTab = tableOfTrigger(pTrigger); + Trigger **pp; + for(pp=&pTab->pTrigger; *pp!=pTrigger; pp=&((*pp)->pNext)); + *pp = (*pp)->pNext; } + sqlite3DeleteTrigger(db, pTrigger); + db->flags |= SQLITE_InternChanges; } - - /* Separate the left and the right query from one another - */ - p->pPrior = 0; - sqlite3ResolveOrderGroupBy(pParse, p, p->pOrderBy, "ORDER"); - if( pPrior->pPrior==0 ){ - sqlite3ResolveOrderGroupBy(pParse, pPrior, pPrior->pOrderBy, "ORDER"); - } +} - /* Compute the limit registers */ - computeLimitRegisters(pParse, p, labelEnd); - if( p->iLimit && op==TK_ALL ){ - regLimitA = ++pParse->nMem; - regLimitB = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Copy, p->iOffset ? p->iOffset+1 : p->iLimit, - regLimitA); - sqlite3VdbeAddOp2(v, OP_Copy, regLimitA, regLimitB); - }else{ - regLimitA = regLimitB = 0; +/* +** pEList is the SET clause of an UPDATE statement. Each entry +** in pEList is of the format =. If any of the entries +** in pEList have an which matches an identifier in pIdList, +** then return TRUE. If pIdList==NULL, then it is considered a +** wildcard that matches anything. Likewise if pEList==NULL then +** it matches anything so always return true. Return false only +** if there is no match. +*/ +static int checkColumnOverlap(IdList *pIdList, ExprList *pEList){ + int e; + if( pIdList==0 || NEVER(pEList==0) ) return 1; + for(e=0; enExpr; e++){ + if( sqlite3IdListIndex(pIdList, pEList->a[e].zName)>=0 ) return 1; } - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = 0; - sqlite3ExprDelete(db, p->pOffset); - p->pOffset = 0; + return 0; +} - regAddrA = ++pParse->nMem; - regEofA = ++pParse->nMem; - regAddrB = ++pParse->nMem; - regEofB = ++pParse->nMem; - regOutA = ++pParse->nMem; - regOutB = ++pParse->nMem; - sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA); - sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB); +/* +** Return a list of all triggers on table pTab if there exists at least +** one trigger that must be fired when an operation of type 'op' is +** performed on the table, and, if that operation is an UPDATE, if at +** least one of the columns in pChanges is being modified. +*/ +SQLITE_PRIVATE Trigger *sqlite3TriggersExist( + Parse *pParse, /* Parse context */ + Table *pTab, /* The table the contains the triggers */ + int op, /* one of TK_DELETE, TK_INSERT, TK_UPDATE */ + ExprList *pChanges, /* Columns that change in an UPDATE statement */ + int *pMask /* OUT: Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ +){ + int mask = 0; + Trigger *pList = 0; + Trigger *p; - /* Jump past the various subroutines and coroutines to the main - ** merge loop - */ - j1 = sqlite3VdbeAddOp0(v, OP_Goto); - addrSelectA = sqlite3VdbeCurrentAddr(v); + if( (pParse->db->flags & SQLITE_EnableTrigger)!=0 ){ + pList = sqlite3TriggerList(pParse, pTab); + } + assert( pList==0 || IsVirtual(pTab)==0 ); + for(p=pList; p; p=p->pNext){ + if( p->op==op && checkColumnOverlap(p->pColumns, pChanges) ){ + mask |= p->tr_tm; + } + } + if( pMask ){ + *pMask = mask; + } + return (mask ? pList : 0); +} +/* +** Convert the pStep->target token into a SrcList and return a pointer +** to that SrcList. +** +** This routine adds a specific database name, if needed, to the target when +** forming the SrcList. This prevents a trigger in one database from +** referring to a target in another database. An exception is when the +** trigger is in TEMP in which case it can refer to any other database it +** wants. +*/ +static SrcList *targetSrcList( + Parse *pParse, /* The parsing context */ + TriggerStep *pStep /* The trigger containing the target token */ +){ + int iDb; /* Index of the database to use */ + SrcList *pSrc; /* SrcList to be returned */ - /* Generate a coroutine to evaluate the SELECT statement to the - ** left of the compound operator - the "A" select. - */ - VdbeNoopComment((v, "Begin coroutine for left SELECT")); - pPrior->iLimit = regLimitA; - explainSetInteger(iSub1, pParse->iNextSelectId); - sqlite3Select(pParse, pPrior, &destA); - sqlite3VdbeAddOp2(v, OP_Integer, 1, regEofA); - sqlite3VdbeAddOp1(v, OP_Yield, regAddrA); - VdbeNoopComment((v, "End coroutine for left SELECT")); + pSrc = sqlite3SrcListAppend(pParse->db, 0, &pStep->target, 0); + if( pSrc ){ + assert( pSrc->nSrc>0 ); + assert( pSrc->a!=0 ); + iDb = sqlite3SchemaToIndex(pParse->db, pStep->pTrig->pSchema); + if( iDb==0 || iDb>=2 ){ + sqlite3 *db = pParse->db; + assert( iDbdb->nDb ); + pSrc->a[pSrc->nSrc-1].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName); + } + } + return pSrc; +} - /* Generate a coroutine to evaluate the SELECT statement on - ** the right - the "B" select - */ - addrSelectB = sqlite3VdbeCurrentAddr(v); - VdbeNoopComment((v, "Begin coroutine for right SELECT")); - savedLimit = p->iLimit; - savedOffset = p->iOffset; - p->iLimit = regLimitB; - p->iOffset = 0; - explainSetInteger(iSub2, pParse->iNextSelectId); - sqlite3Select(pParse, p, &destB); - p->iLimit = savedLimit; - p->iOffset = savedOffset; - sqlite3VdbeAddOp2(v, OP_Integer, 1, regEofB); - sqlite3VdbeAddOp1(v, OP_Yield, regAddrB); - VdbeNoopComment((v, "End coroutine for right SELECT")); +/* +** Generate VDBE code for the statements inside the body of a single +** trigger. +*/ +static int codeTriggerProgram( + Parse *pParse, /* The parser context */ + TriggerStep *pStepList, /* List of statements inside the trigger body */ + int orconf /* Conflict algorithm. (OE_Abort, etc) */ +){ + TriggerStep *pStep; + Vdbe *v = pParse->pVdbe; + sqlite3 *db = pParse->db; - /* Generate a subroutine that outputs the current row of the A - ** select as the next output row of the compound select. - */ - VdbeNoopComment((v, "Output routine for A")); - addrOutA = generateOutputSubroutine(pParse, - p, &destA, pDest, regOutA, - regPrev, pKeyDup, P4_KEYINFO_HANDOFF, labelEnd); - - /* Generate a subroutine that outputs the current row of the B - ** select as the next output row of the compound select. - */ - if( op==TK_ALL || op==TK_UNION ){ - VdbeNoopComment((v, "Output routine for B")); - addrOutB = generateOutputSubroutine(pParse, - p, &destB, pDest, regOutB, - regPrev, pKeyDup, P4_KEYINFO_STATIC, labelEnd); - } + assert( pParse->pTriggerTab && pParse->pToplevel ); + assert( pStepList ); + assert( v!=0 ); + for(pStep=pStepList; pStep; pStep=pStep->pNext){ + /* Figure out the ON CONFLICT policy that will be used for this step + ** of the trigger program. If the statement that caused this trigger + ** to fire had an explicit ON CONFLICT, then use it. Otherwise, use + ** the ON CONFLICT policy that was specified as part of the trigger + ** step statement. Example: + ** + ** CREATE TRIGGER AFTER INSERT ON t1 BEGIN; + ** INSERT OR REPLACE INTO t2 VALUES(new.a, new.b); + ** END; + ** + ** INSERT INTO t1 ... ; -- insert into t2 uses REPLACE policy + ** INSERT OR IGNORE INTO t1 ... ; -- insert into t2 uses IGNORE policy + */ + pParse->eOrconf = (orconf==OE_Default)?pStep->orconf:(u8)orconf; + assert( pParse->okConstFactor==0 ); - /* Generate a subroutine to run when the results from select A - ** are exhausted and only data in select B remains. - */ - VdbeNoopComment((v, "eof-A subroutine")); - if( op==TK_EXCEPT || op==TK_INTERSECT ){ - addrEofA = sqlite3VdbeAddOp2(v, OP_Goto, 0, labelEnd); - }else{ - addrEofA = sqlite3VdbeAddOp2(v, OP_If, regEofB, labelEnd); - sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); - sqlite3VdbeAddOp1(v, OP_Yield, regAddrB); - sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEofA); - p->nSelectRow += pPrior->nSelectRow; + switch( pStep->op ){ + case TK_UPDATE: { + sqlite3Update(pParse, + targetSrcList(pParse, pStep), + sqlite3ExprListDup(db, pStep->pExprList, 0), + sqlite3ExprDup(db, pStep->pWhere, 0), + pParse->eOrconf + ); + break; + } + case TK_INSERT: { + sqlite3Insert(pParse, + targetSrcList(pParse, pStep), + sqlite3SelectDup(db, pStep->pSelect, 0), + sqlite3IdListDup(db, pStep->pIdList), + pParse->eOrconf + ); + break; + } + case TK_DELETE: { + sqlite3DeleteFrom(pParse, + targetSrcList(pParse, pStep), + sqlite3ExprDup(db, pStep->pWhere, 0) + ); + break; + } + default: assert( pStep->op==TK_SELECT ); { + SelectDest sDest; + Select *pSelect = sqlite3SelectDup(db, pStep->pSelect, 0); + sqlite3SelectDestInit(&sDest, SRT_Discard, 0); + sqlite3Select(pParse, pSelect, &sDest); + sqlite3SelectDelete(db, pSelect); + break; + } + } + if( pStep->op!=TK_SELECT ){ + sqlite3VdbeAddOp0(v, OP_ResetCount); + } } - /* Generate a subroutine to run when the results from select B - ** are exhausted and only data in select A remains. - */ - if( op==TK_INTERSECT ){ - addrEofB = addrEofA; - if( p->nSelectRow > pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; - }else{ - VdbeNoopComment((v, "eof-B subroutine")); - addrEofB = sqlite3VdbeAddOp2(v, OP_If, regEofA, labelEnd); - sqlite3VdbeAddOp2(v, OP_Gosub, regOutA, addrOutA); - sqlite3VdbeAddOp1(v, OP_Yield, regAddrA); - sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEofB); - } + return 0; +} - /* Generate code to handle the case of AzErrMsg==0 || pFrom->nErr ); + assert( pTo->zErrMsg==0 || pTo->nErr ); + if( pTo->nErr==0 ){ + pTo->zErrMsg = pFrom->zErrMsg; + pTo->nErr = pFrom->nErr; }else{ - VdbeNoopComment((v, "A-eq-B subroutine")); - addrAeqB = - sqlite3VdbeAddOp1(v, OP_Yield, regAddrA); - sqlite3VdbeAddOp2(v, OP_If, regEofA, addrEofA); - sqlite3VdbeAddOp2(v, OP_Goto, 0, labelCmpr); + sqlite3DbFree(pFrom->db, pFrom->zErrMsg); } +} - /* Generate code to handle the case of A>B - */ - VdbeNoopComment((v, "A-gt-B subroutine")); - addrAgtB = sqlite3VdbeCurrentAddr(v); - if( op==TK_ALL || op==TK_UNION ){ - sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB); - } - sqlite3VdbeAddOp1(v, OP_Yield, regAddrB); - sqlite3VdbeAddOp2(v, OP_If, regEofB, addrEofB); - sqlite3VdbeAddOp2(v, OP_Goto, 0, labelCmpr); +/* +** Create and populate a new TriggerPrg object with a sub-program +** implementing trigger pTrigger with ON CONFLICT policy orconf. +*/ +static TriggerPrg *codeRowTrigger( + Parse *pParse, /* Current parse context */ + Trigger *pTrigger, /* Trigger to code */ + Table *pTab, /* The table pTrigger is attached to */ + int orconf /* ON CONFLICT policy to code trigger program with */ +){ + Parse *pTop = sqlite3ParseToplevel(pParse); + sqlite3 *db = pParse->db; /* Database handle */ + TriggerPrg *pPrg; /* Value to return */ + Expr *pWhen = 0; /* Duplicate of trigger WHEN expression */ + Vdbe *v; /* Temporary VM */ + NameContext sNC; /* Name context for sub-vdbe */ + SubProgram *pProgram = 0; /* Sub-vdbe for trigger program */ + Parse *pSubParse; /* Parse context for sub-vdbe */ + int iEndTrigger = 0; /* Label to jump to if WHEN is false */ + + assert( pTrigger->zName==0 || pTab==tableOfTrigger(pTrigger) ); + assert( pTop->pVdbe ); + + /* Allocate the TriggerPrg and SubProgram objects. To ensure that they + ** are freed if an error occurs, link them into the Parse.pTriggerPrg + ** list of the top-level Parse object sooner rather than later. */ + pPrg = sqlite3DbMallocZero(db, sizeof(TriggerPrg)); + if( !pPrg ) return 0; + pPrg->pNext = pTop->pTriggerPrg; + pTop->pTriggerPrg = pPrg; + pPrg->pProgram = pProgram = sqlite3DbMallocZero(db, sizeof(SubProgram)); + if( !pProgram ) return 0; + sqlite3VdbeLinkSubProgram(pTop->pVdbe, pProgram); + pPrg->pTrigger = pTrigger; + pPrg->orconf = orconf; + pPrg->aColmask[0] = 0xffffffff; + pPrg->aColmask[1] = 0xffffffff; + + /* Allocate and populate a new Parse context to use for coding the + ** trigger sub-program. */ + pSubParse = sqlite3StackAllocZero(db, sizeof(Parse)); + if( !pSubParse ) return 0; + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pSubParse; + pSubParse->db = db; + pSubParse->pTriggerTab = pTab; + pSubParse->pToplevel = pTop; + pSubParse->zAuthContext = pTrigger->zName; + pSubParse->eTriggerOp = pTrigger->op; + pSubParse->nQueryLoop = pParse->nQueryLoop; + + v = sqlite3GetVdbe(pSubParse); + if( v ){ + VdbeComment((v, "Start: %s.%s (%s %s%s%s ON %s)", + pTrigger->zName, onErrorText(orconf), + (pTrigger->tr_tm==TRIGGER_BEFORE ? "BEFORE" : "AFTER"), + (pTrigger->op==TK_UPDATE ? "UPDATE" : ""), + (pTrigger->op==TK_INSERT ? "INSERT" : ""), + (pTrigger->op==TK_DELETE ? "DELETE" : ""), + pTab->zName + )); +#ifndef SQLITE_OMIT_TRACE + sqlite3VdbeChangeP4(v, -1, + sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC + ); +#endif + + /* If one was specified, code the WHEN clause. If it evaluates to false + ** (or NULL) the sub-vdbe is immediately halted by jumping to the + ** OP_Halt inserted at the end of the program. */ + if( pTrigger->pWhen ){ + pWhen = sqlite3ExprDup(db, pTrigger->pWhen, 0); + if( SQLITE_OK==sqlite3ResolveExprNames(&sNC, pWhen) + && db->mallocFailed==0 + ){ + iEndTrigger = sqlite3VdbeMakeLabel(v); + sqlite3ExprIfFalse(pSubParse, pWhen, iEndTrigger, SQLITE_JUMPIFNULL); + } + sqlite3ExprDelete(db, pWhen); + } - /* This code runs once to initialize everything. - */ - sqlite3VdbeJumpHere(v, j1); - sqlite3VdbeAddOp2(v, OP_Integer, 0, regEofA); - sqlite3VdbeAddOp2(v, OP_Integer, 0, regEofB); - sqlite3VdbeAddOp2(v, OP_Gosub, regAddrA, addrSelectA); - sqlite3VdbeAddOp2(v, OP_Gosub, regAddrB, addrSelectB); - sqlite3VdbeAddOp2(v, OP_If, regEofA, addrEofA); - sqlite3VdbeAddOp2(v, OP_If, regEofB, addrEofB); + /* Code the trigger program into the sub-vdbe. */ + codeTriggerProgram(pSubParse, pTrigger->step_list, orconf); - /* Implement the main merge loop - */ - sqlite3VdbeResolveLabel(v, labelCmpr); - sqlite3VdbeAddOp4(v, OP_Permutation, 0, 0, 0, (char*)aPermute, P4_INTARRAY); - sqlite3VdbeAddOp4(v, OP_Compare, destA.iMem, destB.iMem, nOrderBy, - (char*)pKeyMerge, P4_KEYINFO_HANDOFF); - sqlite3VdbeAddOp3(v, OP_Jump, addrAltB, addrAeqB, addrAgtB); + /* Insert an OP_Halt at the end of the sub-program. */ + if( iEndTrigger ){ + sqlite3VdbeResolveLabel(v, iEndTrigger); + } + sqlite3VdbeAddOp0(v, OP_Halt); + VdbeComment((v, "End: %s.%s", pTrigger->zName, onErrorText(orconf))); - /* Release temporary registers - */ - if( regPrev ){ - sqlite3ReleaseTempRange(pParse, regPrev, nOrderBy+1); + transferParseError(pParse, pSubParse); + if( db->mallocFailed==0 ){ + pProgram->aOp = sqlite3VdbeTakeOpArray(v, &pProgram->nOp, &pTop->nMaxArg); + } + pProgram->nMem = pSubParse->nMem; + pProgram->nCsr = pSubParse->nTab; + pProgram->nOnce = pSubParse->nOnce; + pProgram->token = (void *)pTrigger; + pPrg->aColmask[0] = pSubParse->oldmask; + pPrg->aColmask[1] = pSubParse->newmask; + sqlite3VdbeDelete(v); } - /* Jump to the this point in order to terminate the query. - */ - sqlite3VdbeResolveLabel(v, labelEnd); + assert( !pSubParse->pAinc && !pSubParse->pZombieTab ); + assert( !pSubParse->pTriggerPrg && !pSubParse->nMaxArg ); + sqlite3ParserReset(pSubParse); + sqlite3StackFree(db, pSubParse); - /* Set the number of output columns - */ - if( pDest->eDest==SRT_Output ){ - Select *pFirst = pPrior; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, 0, pFirst->pEList); - } + return pPrg; +} + +/* +** Return a pointer to a TriggerPrg object containing the sub-program for +** trigger pTrigger with default ON CONFLICT algorithm orconf. If no such +** TriggerPrg object exists, a new object is allocated and populated before +** being returned. +*/ +static TriggerPrg *getRowTrigger( + Parse *pParse, /* Current parse context */ + Trigger *pTrigger, /* Trigger to code */ + Table *pTab, /* The table trigger pTrigger is attached to */ + int orconf /* ON CONFLICT algorithm. */ +){ + Parse *pRoot = sqlite3ParseToplevel(pParse); + TriggerPrg *pPrg; - /* Reassembly the compound query so that it will be freed correctly - ** by the calling function */ - if( p->pPrior ){ - sqlite3SelectDelete(db, p->pPrior); + assert( pTrigger->zName==0 || pTab==tableOfTrigger(pTrigger) ); + + /* It may be that this trigger has already been coded (or is in the + ** process of being coded). If this is the case, then an entry with + ** a matching TriggerPrg.pTrigger field will be present somewhere + ** in the Parse.pTriggerPrg list. Search for such an entry. */ + for(pPrg=pRoot->pTriggerPrg; + pPrg && (pPrg->pTrigger!=pTrigger || pPrg->orconf!=orconf); + pPrg=pPrg->pNext + ); + + /* If an existing TriggerPrg could not be located, create a new one. */ + if( !pPrg ){ + pPrg = codeRowTrigger(pParse, pTrigger, pTab, orconf); } - p->pPrior = pPrior; - /*** TBD: Insert subroutine calls to close cursors on incomplete - **** subqueries ****/ - explainComposite(pParse, p->op, iSub1, iSub2, 0); - return SQLITE_OK; + return pPrg; } -#endif - -#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) -/* Forward Declarations */ -static void substExprList(sqlite3*, ExprList*, int, ExprList*); -static void substSelect(sqlite3*, Select *, int, ExprList *); /* -** Scan through the expression pExpr. Replace every reference to -** a column in table number iTable with a copy of the iColumn-th -** entry in pEList. (But leave references to the ROWID column -** unchanged.) -** -** This routine is part of the flattening procedure. A subquery -** whose result set is defined by pEList appears as entry in the -** FROM clause of a SELECT such that the VDBE cursor assigned to that -** FORM clause entry is iTable. This routine make the necessary -** changes to pExpr so that it refers directly to the source table -** of the subquery rather the result set of the subquery. +** Generate code for the trigger program associated with trigger p on +** table pTab. The reg, orconf and ignoreJump parameters passed to this +** function are the same as those described in the header function for +** sqlite3CodeRowTrigger() */ -static Expr *substExpr( - sqlite3 *db, /* Report malloc errors to this connection */ - Expr *pExpr, /* Expr in which substitution occurs */ - int iTable, /* Table to be substituted */ - ExprList *pEList /* Substitute expressions */ -){ - if( pExpr==0 ) return 0; - if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){ - if( pExpr->iColumn<0 ){ - pExpr->op = TK_NULL; - }else{ - Expr *pNew; - assert( pEList!=0 && pExpr->iColumnnExpr ); - assert( pExpr->pLeft==0 && pExpr->pRight==0 ); - pNew = sqlite3ExprDup(db, pEList->a[pExpr->iColumn].pExpr, 0); - if( pNew && pExpr->pColl ){ - pNew->pColl = pExpr->pColl; - } - sqlite3ExprDelete(db, pExpr); - pExpr = pNew; - } - }else{ - pExpr->pLeft = substExpr(db, pExpr->pLeft, iTable, pEList); - pExpr->pRight = substExpr(db, pExpr->pRight, iTable, pEList); - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - substSelect(db, pExpr->x.pSelect, iTable, pEList); - }else{ - substExprList(db, pExpr->x.pList, iTable, pEList); - } - } - return pExpr; -} -static void substExprList( - sqlite3 *db, /* Report malloc errors here */ - ExprList *pList, /* List to scan and in which to make substitutes */ - int iTable, /* Table to be substituted */ - ExprList *pEList /* Substitute values */ -){ - int i; - if( pList==0 ) return; - for(i=0; inExpr; i++){ - pList->a[i].pExpr = substExpr(db, pList->a[i].pExpr, iTable, pEList); - } -} -static void substSelect( - sqlite3 *db, /* Report malloc errors here */ - Select *p, /* SELECT statement in which to make substitutions */ - int iTable, /* Table to be replaced */ - ExprList *pEList /* Substitute values */ +SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect( + Parse *pParse, /* Parse context */ + Trigger *p, /* Trigger to code */ + Table *pTab, /* The table to code triggers from */ + int reg, /* Reg array containing OLD.* and NEW.* values */ + int orconf, /* ON CONFLICT policy */ + int ignoreJump /* Instruction to jump to for RAISE(IGNORE) */ ){ - SrcList *pSrc; - struct SrcList_item *pItem; - int i; - if( !p ) return; - substExprList(db, p->pEList, iTable, pEList); - substExprList(db, p->pGroupBy, iTable, pEList); - substExprList(db, p->pOrderBy, iTable, pEList); - p->pHaving = substExpr(db, p->pHaving, iTable, pEList); - p->pWhere = substExpr(db, p->pWhere, iTable, pEList); - substSelect(db, p->pPrior, iTable, pEList); - pSrc = p->pSrc; - assert( pSrc ); /* Even for (SELECT 1) we have: pSrc!=0 but pSrc->nSrc==0 */ - if( ALWAYS(pSrc) ){ - for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - substSelect(db, pItem->pSelect, iTable, pEList); - } + Vdbe *v = sqlite3GetVdbe(pParse); /* Main VM */ + TriggerPrg *pPrg; + pPrg = getRowTrigger(pParse, p, pTab, orconf); + assert( pPrg || pParse->nErr || pParse->db->mallocFailed ); + + /* Code the OP_Program opcode in the parent VDBE. P4 of the OP_Program + ** is a pointer to the sub-vdbe containing the trigger program. */ + if( pPrg ){ + int bRecursive = (p->zName && 0==(pParse->db->flags&SQLITE_RecTriggers)); + + sqlite3VdbeAddOp3(v, OP_Program, reg, ignoreJump, ++pParse->nMem); + sqlite3VdbeChangeP4(v, -1, (const char *)pPrg->pProgram, P4_SUBPROGRAM); + VdbeComment( + (v, "Call: %s.%s", (p->zName?p->zName:"fkey"), onErrorText(orconf))); + + /* Set the P5 operand of the OP_Program instruction to non-zero if + ** recursive invocation of this trigger program is disallowed. Recursive + ** invocation is disallowed if (a) the sub-program is really a trigger, + ** not a foreign key action, and (b) the flag to enable recursive triggers + ** is clear. */ + sqlite3VdbeChangeP5(v, (u8)bRecursive); } } -#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ -#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) /* -** This routine attempts to flatten subqueries in order to speed -** execution. It returns 1 if it makes changes and 0 if no flattening -** occurs. -** -** To understand the concept of flattening, consider the following -** query: -** -** SELECT a FROM (SELECT x+y AS a FROM t1 WHERE z<100) WHERE a>5 -** -** The default way of implementing this query is to execute the -** subquery first and store the results in a temporary table, then -** run the outer query on that temporary table. This requires two -** passes over the data. Furthermore, because the temporary table -** has no indices, the WHERE clause on the outer query cannot be -** optimized. -** -** This routine attempts to rewrite queries such as the above into -** a single flat select, like this: -** -** SELECT x+y AS a FROM t1 WHERE z<100 AND a>5 -** -** The code generated for this simpification gives the same result -** but only has to scan the data once. And because indices might -** exist on the table t1, a complete scan of the data might be -** avoided. -** -** Flattening is only attempted if all of the following are true: -** -** (1) The subquery and the outer query do not both use aggregates. -** -** (2) The subquery is not an aggregate or the outer query is not a join. -** -** (3) The subquery is not the right operand of a left outer join -** (Originally ticket #306. Strengthened by ticket #3300) -** -** (4) The subquery is not DISTINCT. -** -** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT -** sub-queries that were excluded from this optimization. Restriction -** (4) has since been expanded to exclude all DISTINCT subqueries. -** -** (6) The subquery does not use aggregates or the outer query is not -** DISTINCT. -** -** (7) The subquery has a FROM clause. -** -** (8) The subquery does not use LIMIT or the outer query is not a join. -** -** (9) The subquery does not use LIMIT or the outer query does not use -** aggregates. +** This is called to code the required FOR EACH ROW triggers for an operation +** on table pTab. The operation to code triggers for (INSERT, UPDATE or DELETE) +** is given by the op parameter. The tr_tm parameter determines whether the +** BEFORE or AFTER triggers are coded. If the operation is an UPDATE, then +** parameter pChanges is passed the list of columns being modified. ** -** (10) The subquery does not use aggregates or the outer query does not -** use LIMIT. +** If there are no triggers that fire at the specified time for the specified +** operation on pTab, this function is a no-op. ** -** (11) The subquery and the outer query do not both have ORDER BY clauses. +** The reg argument is the address of the first in an array of registers +** that contain the values substituted for the new.* and old.* references +** in the trigger program. If N is the number of columns in table pTab +** (a copy of pTab->nCol), then registers are populated as follows: ** -** (**) Not implemented. Subsumed into restriction (3). Was previously -** a separate restriction deriving from ticket #350. +** Register Contains +** ------------------------------------------------------ +** reg+0 OLD.rowid +** reg+1 OLD.* value of left-most column of pTab +** ... ... +** reg+N OLD.* value of right-most column of pTab +** reg+N+1 NEW.rowid +** reg+N+2 OLD.* value of left-most column of pTab +** ... ... +** reg+N+N+1 NEW.* value of right-most column of pTab ** -** (13) The subquery and outer query do not both use LIMIT. +** For ON DELETE triggers, the registers containing the NEW.* values will +** never be accessed by the trigger program, so they are not allocated or +** populated by the caller (there is no data to populate them with anyway). +** Similarly, for ON INSERT triggers the values stored in the OLD.* registers +** are never accessed, and so are not allocated by the caller. So, for an +** ON INSERT trigger, the value passed to this function as parameter reg +** is not a readable register, although registers (reg+N) through +** (reg+N+N+1) are. ** -** (14) The subquery does not use OFFSET. +** Parameter orconf is the default conflict resolution algorithm for the +** trigger program to use (REPLACE, IGNORE etc.). Parameter ignoreJump +** is the instruction that control should jump to if a trigger program +** raises an IGNORE exception. +*/ +SQLITE_PRIVATE void sqlite3CodeRowTrigger( + Parse *pParse, /* Parse context */ + Trigger *pTrigger, /* List of triggers on table pTab */ + int op, /* One of TK_UPDATE, TK_INSERT, TK_DELETE */ + ExprList *pChanges, /* Changes list for any UPDATE OF triggers */ + int tr_tm, /* One of TRIGGER_BEFORE, TRIGGER_AFTER */ + Table *pTab, /* The table to code triggers from */ + int reg, /* The first in an array of registers (see above) */ + int orconf, /* ON CONFLICT policy */ + int ignoreJump /* Instruction to jump to for RAISE(IGNORE) */ +){ + Trigger *p; /* Used to iterate through pTrigger list */ + + assert( op==TK_UPDATE || op==TK_INSERT || op==TK_DELETE ); + assert( tr_tm==TRIGGER_BEFORE || tr_tm==TRIGGER_AFTER ); + assert( (op==TK_UPDATE)==(pChanges!=0) ); + + for(p=pTrigger; p; p=p->pNext){ + + /* Sanity checking: The schema for the trigger and for the table are + ** always defined. The trigger must be in the same schema as the table + ** or else it must be a TEMP trigger. */ + assert( p->pSchema!=0 ); + assert( p->pTabSchema!=0 ); + assert( p->pSchema==p->pTabSchema + || p->pSchema==pParse->db->aDb[1].pSchema ); + + /* Determine whether we should code this trigger */ + if( p->op==op + && p->tr_tm==tr_tm + && checkColumnOverlap(p->pColumns, pChanges) + ){ + sqlite3CodeRowTriggerDirect(pParse, p, pTab, reg, orconf, ignoreJump); + } + } +} + +/* +** Triggers may access values stored in the old.* or new.* pseudo-table. +** This function returns a 32-bit bitmask indicating which columns of the +** old.* or new.* tables actually are used by triggers. This information +** may be used by the caller, for example, to avoid having to load the entire +** old.* record into memory when executing an UPDATE or DELETE command. ** -** (15) The outer query is not part of a compound select or the -** subquery does not have a LIMIT clause. -** (See ticket #2339 and ticket [02a8e81d44]). +** Bit 0 of the returned mask is set if the left-most column of the +** table may be accessed using an [old|new].reference. Bit 1 is set if +** the second leftmost column value is required, and so on. If there +** are more than 32 columns in the table, and at least one of the columns +** with an index greater than 32 may be accessed, 0xffffffff is returned. ** -** (16) The outer query is not an aggregate or the subquery does -** not contain ORDER BY. (Ticket #2942) This used to not matter -** until we introduced the group_concat() function. +** It is not possible to determine if the old.rowid or new.rowid column is +** accessed by triggers. The caller must always assume that it is. ** -** (17) The sub-query is not a compound select, or it is a UNION ALL -** compound clause made up entirely of non-aggregate queries, and -** the parent query: +** Parameter isNew must be either 1 or 0. If it is 0, then the mask returned +** applies to the old.* table. If 1, the new.* table. ** -** * is not itself part of a compound select, -** * is not an aggregate or DISTINCT query, and -** * has no other tables or sub-selects in the FROM clause. +** Parameter tr_tm must be a mask with one or both of the TRIGGER_BEFORE +** and TRIGGER_AFTER bits set. Values accessed by BEFORE triggers are only +** included in the returned mask if the TRIGGER_BEFORE bit is set in the +** tr_tm parameter. Similarly, values accessed by AFTER triggers are only +** included in the returned mask if the TRIGGER_AFTER bit is set in tr_tm. +*/ +SQLITE_PRIVATE u32 sqlite3TriggerColmask( + Parse *pParse, /* Parse context */ + Trigger *pTrigger, /* List of triggers on table pTab */ + ExprList *pChanges, /* Changes list for any UPDATE OF triggers */ + int isNew, /* 1 for new.* ref mask, 0 for old.* ref mask */ + int tr_tm, /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ + Table *pTab, /* The table to code triggers from */ + int orconf /* Default ON CONFLICT policy for trigger steps */ +){ + const int op = pChanges ? TK_UPDATE : TK_DELETE; + u32 mask = 0; + Trigger *p; + + assert( isNew==1 || isNew==0 ); + for(p=pTrigger; p; p=p->pNext){ + if( p->op==op && (tr_tm&p->tr_tm) + && checkColumnOverlap(p->pColumns,pChanges) + ){ + TriggerPrg *pPrg; + pPrg = getRowTrigger(pParse, p, pTab, orconf); + if( pPrg ){ + mask |= pPrg->aColmask[isNew]; + } + } + } + + return mask; +} + +#endif /* !defined(SQLITE_OMIT_TRIGGER) */ + +/************** End of trigger.c *********************************************/ +/************** Begin file update.c ******************************************/ +/* +** 2001 September 15 ** -** The parent and sub-query may contain WHERE clauses. Subject to -** rules (11), (13) and (14), they may also contain ORDER BY, -** LIMIT and OFFSET clauses. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** (18) If the sub-query is a compound select, then all terms of the -** ORDER by clause of the parent must be simple references to -** columns of the sub-query. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** (19) The subquery does not use LIMIT or the outer query does not -** have a WHERE clause. +************************************************************************* +** This file contains C code routines that are called by the parser +** to handle UPDATE statements. +*/ + +#ifndef SQLITE_OMIT_VIRTUALTABLE +/* Forward declaration */ +static void updateVirtualTable( + Parse *pParse, /* The parsing context */ + SrcList *pSrc, /* The virtual table to be modified */ + Table *pTab, /* The virtual table */ + ExprList *pChanges, /* The columns to change in the UPDATE statement */ + Expr *pRowidExpr, /* Expression used to recompute the rowid */ + int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ + Expr *pWhere, /* WHERE clause of the UPDATE statement */ + int onError /* ON CONFLICT strategy */ +); +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +/* +** The most recently coded instruction was an OP_Column to retrieve the +** i-th column of table pTab. This routine sets the P4 parameter of the +** OP_Column to the default value, if any. ** -** (20) If the sub-query is a compound select, then it must not use -** an ORDER BY clause. Ticket #3773. We could relax this constraint -** somewhat by saying that the terms of the ORDER BY clause must -** appear as unmodified result columns in the outer query. But -** have other optimizations in mind to deal with that case. +** The default value of a column is specified by a DEFAULT clause in the +** column definition. This was either supplied by the user when the table +** was created, or added later to the table definition by an ALTER TABLE +** command. If the latter, then the row-records in the table btree on disk +** may not contain a value for the column and the default value, taken +** from the P4 parameter of the OP_Column instruction, is returned instead. +** If the former, then all row-records are guaranteed to include a value +** for the column and the P4 value is not required. ** -** (21) The subquery does not use LIMIT or the outer query is not -** DISTINCT. (See ticket [752e1646fc]). +** Column definitions created by an ALTER TABLE command may only have +** literal default values specified: a number, null or a string. (If a more +** complicated default expression value was provided, it is evaluated +** when the ALTER TABLE is executed and one of the literal values written +** into the sqlite_master table.) ** -** In this routine, the "p" parameter is a pointer to the outer query. -** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query -** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates. +** Therefore, the P4 parameter is only required if the default value for +** the column is a literal number, string or null. The sqlite3ValueFromExpr() +** function is capable of transforming these types of expressions into +** sqlite3_value objects. ** -** If flattening is not attempted, this routine is a no-op and returns 0. -** If flattening is attempted this routine returns 1. +** If parameter iReg is not negative, code an OP_RealAffinity instruction +** on register iReg. This is used when an equivalent integer value is +** stored in place of an 8-byte floating point value in order to save +** space. +*/ +SQLITE_PRIVATE void sqlite3ColumnDefault(Vdbe *v, Table *pTab, int i, int iReg){ + assert( pTab!=0 ); + if( !pTab->pSelect ){ + sqlite3_value *pValue = 0; + u8 enc = ENC(sqlite3VdbeDb(v)); + Column *pCol = &pTab->aCol[i]; + VdbeComment((v, "%s.%s", pTab->zName, pCol->zName)); + assert( inCol ); + sqlite3ValueFromExpr(sqlite3VdbeDb(v), pCol->pDflt, enc, + pCol->affinity, &pValue); + if( pValue ){ + sqlite3VdbeChangeP4(v, -1, (const char *)pValue, P4_MEM); + } +#ifndef SQLITE_OMIT_FLOATING_POINT + if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){ + sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg); + } +#endif + } +} + +/* +** Process an UPDATE statement. ** -** All of the expression analysis must occur on both the outer query and -** the subquery before this routine runs. +** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL; +** \_______/ \________/ \______/ \________________/ +* onError pTabList pChanges pWhere */ -static int flattenSubquery( - Parse *pParse, /* Parsing context */ - Select *p, /* The parent or outer SELECT statement */ - int iFrom, /* Index in p->pSrc->a[] of the inner subquery */ - int isAgg, /* True if outer SELECT uses aggregate functions */ - int subqueryIsAgg /* True if the subquery uses aggregate functions */ +SQLITE_PRIVATE void sqlite3Update( + Parse *pParse, /* The parser context */ + SrcList *pTabList, /* The table in which we should change things */ + ExprList *pChanges, /* Things to be changed */ + Expr *pWhere, /* The WHERE clause. May be null */ + int onError /* How to handle constraint errors */ ){ - const char *zSavedAuthContext = pParse->zAuthContext; - Select *pParent; - Select *pSub; /* The inner query or "subquery" */ - Select *pSub1; /* Pointer to the rightmost select in sub-query */ - SrcList *pSrc; /* The FROM clause of the outer query */ - SrcList *pSubSrc; /* The FROM clause of the subquery */ - ExprList *pList; /* The result set of the outer query */ - int iParent; /* VDBE cursor number of the pSub result set temp table */ - int i; /* Loop counter */ - Expr *pWhere; /* The WHERE clause */ - struct SrcList_item *pSubitem; /* The subquery */ - sqlite3 *db = pParse->db; + int i, j; /* Loop counters */ + Table *pTab; /* The table to be updated */ + int addrTop = 0; /* VDBE instruction address of the start of the loop */ + WhereInfo *pWInfo; /* Information about the WHERE clause */ + Vdbe *v; /* The virtual database engine */ + Index *pIdx; /* For looping over indices */ + Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */ + int nIdx; /* Number of indices that need updating */ + int iBaseCur; /* Base cursor number */ + int iDataCur; /* Cursor for the canonical data btree */ + int iIdxCur; /* Cursor for the first index */ + sqlite3 *db; /* The database structure */ + int *aRegIdx = 0; /* One register assigned to each index to be updated */ + int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the + ** an expression for the i-th column of the table. + ** aXRef[i]==-1 if the i-th column is not changed. */ + u8 *aToOpen; /* 1 for tables and indices to be opened */ + u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */ + u8 chngRowid; /* Rowid changed in a normal table */ + u8 chngKey; /* Either chngPk or chngRowid */ + Expr *pRowidExpr = 0; /* Expression defining the new record number */ + AuthContext sContext; /* The authorization context */ + NameContext sNC; /* The name-context to resolve expressions in */ + int iDb; /* Database containing the table being updated */ + int okOnePass; /* True for one-pass algorithm without the FIFO */ + int hasFK; /* True if foreign key processing is required */ + int labelBreak; /* Jump here to break out of UPDATE loop */ + int labelContinue; /* Jump here to continue next step of UPDATE loop */ - /* Check to see if flattening is permitted. Return 0 if not. - */ - assert( p!=0 ); - assert( p->pPrior==0 ); /* Unable to flatten compound queries */ - if( db->flags & SQLITE_QueryFlattener ) return 0; - pSrc = p->pSrc; - assert( pSrc && iFrom>=0 && iFromnSrc ); - pSubitem = &pSrc->a[iFrom]; - iParent = pSubitem->iCursor; - pSub = pSubitem->pSelect; - assert( pSub!=0 ); - if( isAgg && subqueryIsAgg ) return 0; /* Restriction (1) */ - if( subqueryIsAgg && pSrc->nSrc>1 ) return 0; /* Restriction (2) */ - pSubSrc = pSub->pSrc; - assert( pSubSrc ); - /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, - ** not arbitrary expresssions, we allowed some combining of LIMIT and OFFSET - ** because they could be computed at compile-time. But when LIMIT and OFFSET - ** became arbitrary expressions, we were forced to add restrictions (13) - ** and (14). */ - if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */ - if( pSub->pOffset ) return 0; /* Restriction (14) */ - if( p->pRightmost && pSub->pLimit ){ - return 0; /* Restriction (15) */ - } - if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */ - if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (5) */ - if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){ - return 0; /* Restrictions (8)(9) */ - } - if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){ - return 0; /* Restriction (6) */ +#ifndef SQLITE_OMIT_TRIGGER + int isView; /* True when updating a view (INSTEAD OF trigger) */ + Trigger *pTrigger; /* List of triggers on pTab, if required */ + int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ +#endif + int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */ + int iEph = 0; /* Ephemeral table holding all primary key values */ + int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */ + int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */ + + /* Register Allocations */ + int regRowCount = 0; /* A count of rows changed */ + int regOldRowid; /* The old rowid */ + int regNewRowid; /* The new rowid */ + int regNew; /* Content of the NEW.* table in triggers */ + int regOld = 0; /* Content of OLD.* table in triggers */ + int regRowSet = 0; /* Rowset of rows to be updated */ + int regKey = 0; /* composite PRIMARY KEY value */ + + memset(&sContext, 0, sizeof(sContext)); + db = pParse->db; + if( pParse->nErr || db->mallocFailed ){ + goto update_cleanup; } - if( p->pOrderBy && pSub->pOrderBy ){ - return 0; /* Restriction (11) */ + assert( pTabList->nSrc==1 ); + + /* Locate the table which we want to update. + */ + pTab = sqlite3SrcListLookup(pParse, pTabList); + if( pTab==0 ) goto update_cleanup; + iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + + /* Figure out if we have any triggers and if the table being + ** updated is a view. + */ +#ifndef SQLITE_OMIT_TRIGGER + pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask); + isView = pTab->pSelect!=0; + assert( pTrigger || tmask==0 ); +#else +# define pTrigger 0 +# define isView 0 +# define tmask 0 +#endif +#ifdef SQLITE_OMIT_VIEW +# undef isView +# define isView 0 +#endif + + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ + goto update_cleanup; } - if( isAgg && pSub->pOrderBy ) return 0; /* Restriction (16) */ - if( pSub->pLimit && p->pWhere ) return 0; /* Restriction (19) */ - if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ - return 0; /* Restriction (21) */ + if( sqlite3IsReadOnly(pParse, pTab, tmask) ){ + goto update_cleanup; } - /* OBSOLETE COMMENT 1: - ** Restriction 3: If the subquery is a join, make sure the subquery is - ** not used as the right operand of an outer join. Examples of why this - ** is not allowed: - ** - ** t1 LEFT OUTER JOIN (t2 JOIN t3) - ** - ** If we flatten the above, we would get - ** - ** (t1 LEFT OUTER JOIN t2) JOIN t3 - ** - ** which is not at all the same thing. - ** - ** OBSOLETE COMMENT 2: - ** Restriction 12: If the subquery is the right operand of a left outer - ** join, make sure the subquery has no WHERE clause. - ** An examples of why this is not allowed: - ** - ** t1 LEFT OUTER JOIN (SELECT * FROM t2 WHERE t2.x>0) - ** - ** If we flatten the above, we would get - ** - ** (t1 LEFT OUTER JOIN t2) WHERE t2.x>0 - ** - ** But the t2.x>0 test will always fail on a NULL row of t2, which - ** effectively converts the OUTER JOIN into an INNER JOIN. - ** - ** THIS OVERRIDES OBSOLETE COMMENTS 1 AND 2 ABOVE: - ** Ticket #3300 shows that flattening the right term of a LEFT JOIN - ** is fraught with danger. Best to avoid the whole thing. If the - ** subquery is the right term of a LEFT JOIN, then do not flatten. + /* Allocate a cursors for the main database table and for all indices. + ** The index cursors might not be used, but if they are used they + ** need to occur right after the database cursor. So go ahead and + ** allocate enough space, just in case. */ - if( (pSubitem->jointype & JT_OUTER)!=0 ){ - return 0; + pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++; + iIdxCur = iDataCur+1; + pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); + for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ + if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){ + iDataCur = pParse->nTab; + pTabList->a[0].iCursor = iDataCur; + } + pParse->nTab++; } - /* Restriction 17: If the sub-query is a compound SELECT, then it must - ** use only the UNION ALL operator. And none of the simple select queries - ** that make up the compound SELECT are allowed to be aggregate or distinct - ** queries. + /* Allocate space for aXRef[], aRegIdx[], and aToOpen[]. + ** Initialize aXRef[] and aToOpen[] to their default values. */ - if( pSub->pPrior ){ - if( pSub->pOrderBy ){ - return 0; /* Restriction 20 */ + aXRef = sqlite3DbMallocRaw(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 ); + if( aXRef==0 ) goto update_cleanup; + aRegIdx = aXRef+pTab->nCol; + aToOpen = (u8*)(aRegIdx+nIdx); + memset(aToOpen, 1, nIdx+1); + aToOpen[nIdx+1] = 0; + for(i=0; inCol; i++) aXRef[i] = -1; + + /* Initialize the name-context */ + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + + /* Resolve the column names in all the expressions of the + ** of the UPDATE statement. Also find the column index + ** for each column to be updated in the pChanges array. For each + ** column to be updated, make sure we have authorization to change + ** that column. + */ + chngRowid = chngPk = 0; + for(i=0; inExpr; i++){ + if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){ + goto update_cleanup; } - if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){ - return 0; + for(j=0; jnCol; j++){ + if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){ + if( j==pTab->iPKey ){ + chngRowid = 1; + pRowidExpr = pChanges->a[i].pExpr; + }else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){ + chngPk = 1; + } + aXRef[j] = i; + break; + } } - for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){ - testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); - testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); - if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 - || (pSub1->pPrior && pSub1->op!=TK_ALL) - || NEVER(pSub1->pSrc==0) || pSub1->pSrc->nSrc!=1 - ){ - return 0; + if( j>=pTab->nCol ){ + if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){ + j = -1; + chngRowid = 1; + pRowidExpr = pChanges->a[i].pExpr; + }else{ + sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName); + pParse->checkSchema = 1; + goto update_cleanup; } } - - /* Restriction 18. */ - if( p->pOrderBy ){ - int ii; - for(ii=0; iipOrderBy->nExpr; ii++){ - if( p->pOrderBy->a[ii].iCol==0 ) return 0; +#ifndef SQLITE_OMIT_AUTHORIZATION + { + int rc; + rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName, + j<0 ? "ROWID" : pTab->aCol[j].zName, + db->aDb[iDb].zName); + if( rc==SQLITE_DENY ){ + goto update_cleanup; + }else if( rc==SQLITE_IGNORE ){ + aXRef[j] = -1; } } +#endif } + assert( (chngRowid & chngPk)==0 ); + assert( chngRowid==0 || chngRowid==1 ); + assert( chngPk==0 || chngPk==1 ); + chngKey = chngRowid + chngPk; - /***** If we reach this point, flattening is permitted. *****/ + /* The SET expressions are not actually used inside the WHERE loop. + ** So reset the colUsed mask + */ + pTabList->a[0].colUsed = 0; - /* Authorize the subquery */ - pParse->zAuthContext = pSubitem->zName; - sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0); - pParse->zAuthContext = zSavedAuthContext; + hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey); - /* If the sub-query is a compound SELECT statement, then (by restrictions - ** 17 and 18 above) it must be a UNION ALL and the parent query must - ** be of the form: - ** - ** SELECT FROM () - ** - ** followed by any ORDER BY, LIMIT and/or OFFSET clauses. This block - ** creates N-1 copies of the parent query without any ORDER BY, LIMIT or - ** OFFSET clauses and joins them to the left-hand-side of the original - ** using UNION ALL operators. In this case N is the number of simple - ** select statements in the compound sub-query. - ** - ** Example: - ** - ** SELECT a+1 FROM ( - ** SELECT x FROM tab - ** UNION ALL - ** SELECT y FROM tab - ** UNION ALL - ** SELECT abs(z*2) FROM tab2 - ** ) WHERE a!=5 ORDER BY 1 - ** - ** Transformed into: - ** - ** SELECT x+1 FROM tab WHERE x+1!=5 - ** UNION ALL - ** SELECT y+1 FROM tab WHERE y+1!=5 - ** UNION ALL - ** SELECT abs(z*2)+1 FROM tab2 WHERE abs(z*2)+1!=5 - ** ORDER BY 1 - ** - ** We call this the "compound-subquery flattening". + /* There is one entry in the aRegIdx[] array for each index on the table + ** being updated. Fill in aRegIdx[] with a register number that will hold + ** the key for accessing each index. */ - for(pSub=pSub->pPrior; pSub; pSub=pSub->pPrior){ - Select *pNew; - ExprList *pOrderBy = p->pOrderBy; - Expr *pLimit = p->pLimit; - Select *pPrior = p->pPrior; - p->pOrderBy = 0; - p->pSrc = 0; - p->pPrior = 0; - p->pLimit = 0; - pNew = sqlite3SelectDup(db, p, 0); - p->pLimit = pLimit; - p->pOrderBy = pOrderBy; - p->pSrc = pSrc; - p->op = TK_ALL; - p->pRightmost = 0; - if( pNew==0 ){ - pNew = pPrior; + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + int reg; + if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){ + reg = ++pParse->nMem; }else{ - pNew->pPrior = pPrior; - pNew->pRightmost = 0; + reg = 0; + for(i=0; inKeyCol; i++){ + if( aXRef[pIdx->aiColumn[i]]>=0 ){ + reg = ++pParse->nMem; + break; + } + } } - p->pPrior = pNew; - if( db->mallocFailed ) return 1; + if( reg==0 ) aToOpen[j+1] = 0; + aRegIdx[j] = reg; } - /* Begin flattening the iFrom-th entry of the FROM clause - ** in the outer query. + /* Begin generating code. */ + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto update_cleanup; + if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); + sqlite3BeginWriteOperation(pParse, 1, iDb); + +#ifndef SQLITE_OMIT_VIRTUALTABLE + /* Virtual tables must be handled separately */ + if( IsVirtual(pTab) ){ + updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef, + pWhere, onError); + pWhere = 0; + pTabList = 0; + goto update_cleanup; + } +#endif + + /* Allocate required registers. */ + regRowSet = ++pParse->nMem; + regOldRowid = regNewRowid = ++pParse->nMem; + if( chngPk || pTrigger || hasFK ){ + regOld = pParse->nMem + 1; + pParse->nMem += pTab->nCol; + } + if( chngKey || pTrigger || hasFK ){ + regNewRowid = ++pParse->nMem; + } + regNew = pParse->nMem + 1; + pParse->nMem += pTab->nCol; + + /* Start the view context. */ + if( isView ){ + sqlite3AuthContextPush(pParse, &sContext, pTab->zName); + } + + /* If we are trying to update a view, realize that view into + ** an ephemeral table. */ - pSub = pSub1 = pSubitem->pSelect; +#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) + if( isView ){ + sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur); + } +#endif - /* Delete the transient table structure associated with the - ** subquery + /* Resolve the column names in all the expressions in the + ** WHERE clause. */ - sqlite3DbFree(db, pSubitem->zDatabase); - sqlite3DbFree(db, pSubitem->zName); - sqlite3DbFree(db, pSubitem->zAlias); - pSubitem->zDatabase = 0; - pSubitem->zName = 0; - pSubitem->zAlias = 0; - pSubitem->pSelect = 0; + if( sqlite3ResolveExprNames(&sNC, pWhere) ){ + goto update_cleanup; + } - /* Defer deleting the Table object associated with the - ** subquery until code generation is - ** complete, since there may still exist Expr.pTab entries that - ** refer to the subquery even after flattening. Ticket #3346. - ** - ** pSubitem->pTab is always non-NULL by test restrictions and tests above. + /* Begin the database scan */ - if( ALWAYS(pSubitem->pTab!=0) ){ - Table *pTabToDel = pSubitem->pTab; - if( pTabToDel->nRef==1 ){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - pTabToDel->pNextZombie = pToplevel->pZombieTab; - pToplevel->pZombieTab = pTabToDel; + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid); + pWInfo = sqlite3WhereBegin( + pParse, pTabList, pWhere, 0, 0, WHERE_ONEPASS_DESIRED, iIdxCur + ); + if( pWInfo==0 ) goto update_cleanup; + okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + + /* Remember the rowid of every item to be updated. + */ + sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid); + if( !okOnePass ){ + sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid); + } + + /* End the database scan loop. + */ + sqlite3WhereEnd(pWInfo); + }else{ + int iPk; /* First of nPk memory cells holding PRIMARY KEY value */ + i16 nPk; /* Number of components of the PRIMARY KEY */ + int addrOpen; /* Address of the OpenEphemeral instruction */ + + assert( pPk!=0 ); + nPk = pPk->nKeyCol; + iPk = pParse->nMem+1; + pParse->nMem += nPk; + regKey = ++pParse->nMem; + iEph = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_Null, 0, iPk); + addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, + WHERE_ONEPASS_DESIRED, iIdxCur); + if( pWInfo==0 ) goto update_cleanup; + okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + for(i=0; iaiColumn[i], + iPk+i); + } + if( okOnePass ){ + sqlite3VdbeChangeToNoop(v, addrOpen); + nKey = nPk; + regKey = iPk; }else{ - pTabToDel->nRef--; + sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey, + sqlite3IndexAffinityStr(v, pPk), nPk); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey); } - pSubitem->pTab = 0; + sqlite3WhereEnd(pWInfo); } - /* The following loop runs once for each term in a compound-subquery - ** flattening (as described above). If we are doing a different kind - ** of flattening - a flattening other than a compound-subquery flattening - - ** then this loop only runs once. - ** - ** This loop moves all of the FROM elements of the subquery into the - ** the FROM clause of the outer query. Before doing this, remember - ** the cursor number for the original outer query FROM element in - ** iParent. The iParent cursor will never be used. Subsequent code - ** will scan expressions looking for iParent references and replace - ** those references with expressions that resolve to the subquery FROM - ** elements we are now copying in. + /* Initialize the count of updated rows */ - for(pParent=p; pParent; pParent=pParent->pPrior, pSub=pSub->pPrior){ - int nSubSrc; - u8 jointype = 0; - pSubSrc = pSub->pSrc; /* FROM clause of subquery */ - nSubSrc = pSubSrc->nSrc; /* Number of terms in subquery FROM clause */ - pSrc = pParent->pSrc; /* FROM clause of the outer query */ + if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){ + regRowCount = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); + } - if( pSrc ){ - assert( pParent==p ); /* First time through the loop */ - jointype = pSubitem->jointype; + labelBreak = sqlite3VdbeMakeLabel(v); + if( !isView ){ + /* + ** Open every index that needs updating. Note that if any + ** index could potentially invoke a REPLACE conflict resolution + ** action, then we need to open all indices because we might need + ** to be deleting some records. + */ + if( onError==OE_Replace ){ + memset(aToOpen, 1, nIdx+1); }else{ - assert( pParent!=p ); /* 2nd and subsequent times through the loop */ - pSrc = pParent->pSrc = sqlite3SrcListAppend(db, 0, 0, 0); - if( pSrc==0 ){ - assert( db->mallocFailed ); - break; + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->onError==OE_Replace ){ + memset(aToOpen, 1, nIdx+1); + break; + } } } + if( okOnePass ){ + if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; + if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; + } + sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iBaseCur, aToOpen, + 0, 0); + } - /* The subquery uses a single slot of the FROM clause of the outer - ** query. If the subquery has more than one element in its FROM clause, - ** then expand the outer query to make space for it to hold all elements - ** of the subquery. - ** - ** Example: - ** - ** SELECT * FROM tabA, (SELECT * FROM sub1, sub2), tabB; - ** - ** The outer query has 3 slots in its FROM clause. One slot of the - ** outer query (the middle slot) is used by the subquery. The next - ** block of code will expand the out query to 4 slots. The middle - ** slot is expanded to two slots in order to make space for the - ** two elements in the FROM clause of the subquery. - */ - if( nSubSrc>1 ){ - pParent->pSrc = pSrc = sqlite3SrcListEnlarge(db, pSrc, nSubSrc-1,iFrom+1); - if( db->mallocFailed ){ - break; + /* Top of the update loop */ + if( okOnePass ){ + if( aToOpen[iDataCur-iBaseCur] && !isView ){ + assert( pPk ); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey); + VdbeCoverageNeverTaken(v); + } + labelContinue = labelBreak; + sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); + VdbeCoverageIf(v, pPk==0); + VdbeCoverageIf(v, pPk!=0); + }else if( pPk ){ + labelContinue = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); + addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); + VdbeCoverage(v); + }else{ + labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak, + regOldRowid); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); + VdbeCoverage(v); + } + + /* If the record number will change, set register regNewRowid to + ** contain the new value. If the record number is not being modified, + ** then regNewRowid is the same register as regOldRowid, which is + ** already populated. */ + assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid ); + if( chngRowid ){ + sqlite3ExprCode(pParse, pRowidExpr, regNewRowid); + sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v); + } + + /* Compute the old pre-UPDATE content of the row being changed, if that + ** information is needed */ + if( chngPk || hasFK || pTrigger ){ + u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0); + oldmask |= sqlite3TriggerColmask(pParse, + pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError + ); + for(i=0; inCol; i++){ + if( oldmask==0xffffffff + || (i<32 && (oldmask & MASKBIT32(i))!=0) + || (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0 + ){ + testcase( oldmask!=0xffffffff && i==31 ); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i); + }else{ + sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i); } } + if( chngRowid==0 && pPk==0 ){ + sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid); + } + } - /* Transfer the FROM clause terms from the subquery into the - ** outer query. + /* Populate the array of registers beginning at regNew with the new + ** row data. This array is used to check constants, create the new + ** table and index records, and as the values for any new.* references + ** made by triggers. + ** + ** If there are one or more BEFORE triggers, then do not populate the + ** registers associated with columns that are (a) not modified by + ** this UPDATE statement and (b) not accessed by new.* references. The + ** values for registers not modified by the UPDATE must be reloaded from + ** the database after the BEFORE triggers are fired anyway (as the trigger + ** may have modified them). So not loading those that are not going to + ** be used eliminates some redundant opcodes. + */ + newmask = sqlite3TriggerColmask( + pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError + ); + /*sqlite3VdbeAddOp3(v, OP_Null, 0, regNew, regNew+pTab->nCol-1);*/ + for(i=0; inCol; i++){ + if( i==pTab->iPKey ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); + }else{ + j = aXRef[i]; + if( j>=0 ){ + sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i); + }else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){ + /* This branch loads the value of a column that will not be changed + ** into a register. This is done if there are no BEFORE triggers, or + ** if there are one or more BEFORE triggers that use this value via + ** a new.* reference in a trigger program. + */ + testcase( i==31 ); + testcase( i==32 ); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); + }else{ + sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); + } + } + } + + /* Fire any BEFORE UPDATE triggers. This happens before constraints are + ** verified. One could argue that this is wrong. + */ + if( tmask&TRIGGER_BEFORE ){ + sqlite3TableAffinity(v, pTab, regNew); + sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, + TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue); + + /* The row-trigger may have deleted the row being updated. In this + ** case, jump to the next row. No updates or AFTER triggers are + ** required. This behavior - what happens when the row being updated + ** is deleted or renamed by a BEFORE trigger - is left undefined in the + ** documentation. */ - for(i=0; ia[i+iFrom].pUsing); - pSrc->a[i+iFrom] = pSubSrc->a[i]; - memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i])); + if( pPk ){ + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey); + VdbeCoverage(v); + }else{ + sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); + VdbeCoverage(v); } - pSrc->a[iFrom].jointype = jointype; - - /* Now begin substituting subquery result set expressions for - ** references to the iParent in the outer query. - ** - ** Example: - ** - ** SELECT a+5, b*10 FROM (SELECT x*3 AS a, y+10 AS b FROM t1) WHERE a>b; - ** \ \_____________ subquery __________/ / - ** \_____________________ outer query ______________________________/ - ** - ** We look at every expression in the outer query and every place we see - ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10". + + /* If it did not delete it, the row-trigger may still have modified + ** some of the columns of the row being updated. Load the values for + ** all columns not modified by the update statement into their + ** registers in case this has happened. */ - pList = pParent->pEList; - for(i=0; inExpr; i++){ - if( pList->a[i].zName==0 ){ - const char *zSpan = pList->a[i].zSpan; - if( ALWAYS(zSpan) ){ - pList->a[i].zName = sqlite3DbStrDup(db, zSpan); - } + for(i=0; inCol; i++){ + if( aXRef[i]<0 && i!=pTab->iPKey ){ + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); } } - substExprList(db, pParent->pEList, iParent, pSub->pEList); - if( isAgg ){ - substExprList(db, pParent->pGroupBy, iParent, pSub->pEList); - pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList); + } + + if( !isView ){ + int j1 = 0; /* Address of jump instruction */ + int bReplace = 0; /* True if REPLACE conflict resolution might happen */ + + /* Do constraint checks. */ + assert( regOldRowid>0 ); + sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, + regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace); + + /* Do FK constraint checks. */ + if( hasFK ){ + sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey); + } + + /* Delete the index entries associated with the current record. */ + if( bReplace || chngKey ){ + if( pPk ){ + j1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey); + }else{ + j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid); + } + VdbeCoverageNeverTaken(v); } - if( pSub->pOrderBy ){ - assert( pParent->pOrderBy==0 ); - pParent->pOrderBy = pSub->pOrderBy; - pSub->pOrderBy = 0; - }else if( pParent->pOrderBy ){ - substExprList(db, pParent->pOrderBy, iParent, pSub->pEList); + sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx); + + /* If changing the record number, delete the old record. */ + if( hasFK || chngKey || pPk!=0 ){ + sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0); } - if( pSub->pWhere ){ - pWhere = sqlite3ExprDup(db, pSub->pWhere, 0); - }else{ - pWhere = 0; + if( bReplace || chngKey ){ + sqlite3VdbeJumpHere(v, j1); } - if( subqueryIsAgg ){ - assert( pParent->pHaving==0 ); - pParent->pHaving = pParent->pWhere; - pParent->pWhere = pWhere; - pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList); - pParent->pHaving = sqlite3ExprAnd(db, pParent->pHaving, - sqlite3ExprDup(db, pSub->pHaving, 0)); - assert( pParent->pGroupBy==0 ); - pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0); - }else{ - pParent->pWhere = substExpr(db, pParent->pWhere, iParent, pSub->pEList); - pParent->pWhere = sqlite3ExprAnd(db, pParent->pWhere, pWhere); + + if( hasFK ){ + sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey); } - /* The flattened query is distinct if either the inner or the - ** outer query is distinct. - */ - pParent->selFlags |= pSub->selFlags & SF_Distinct; - - /* - ** SELECT ... FROM (SELECT ... LIMIT a OFFSET b) LIMIT x OFFSET y; - ** - ** One is tempted to try to add a and b to combine the limits. But this - ** does not work if either limit is negative. - */ - if( pSub->pLimit ){ - pParent->pLimit = pSub->pLimit; - pSub->pLimit = 0; + /* Insert the new index entries and the new record. */ + sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur, + regNewRowid, aRegIdx, 1, 0, 0); + + /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to + ** handle rows (possibly in other tables) that refer via a foreign key + ** to the row just updated. */ + if( hasFK ){ + sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey); } } - /* Finially, delete what is left of the subquery and return - ** success. + /* Increment the row counter */ - sqlite3SelectDelete(db, pSub1); + if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){ + sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); + } - return 1; + sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, + TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue); + + /* Repeat the above with the next record to be updated, until + ** all record selected by the WHERE clause have been updated. + */ + if( okOnePass ){ + /* Nothing to do at end-of-loop for a single-pass */ + }else if( pPk ){ + sqlite3VdbeResolveLabel(v, labelContinue); + sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v); + }else{ + sqlite3VdbeAddOp2(v, OP_Goto, 0, labelContinue); + } + sqlite3VdbeResolveLabel(v, labelBreak); + + /* Close all tables */ + for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ + assert( aRegIdx ); + if( aToOpen[i+1] ){ + sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0); + } + } + if( iDataCurnested==0 && pParse->pTriggerTab==0 ){ + sqlite3AutoincrementEnd(pParse); + } + + /* + ** Return the number of rows that were changed. If this routine is + ** generating code because of a call to sqlite3NestedParse(), do not + ** invoke the callback function. + */ + if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){ + sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC); + } + +update_cleanup: + sqlite3AuthContextPop(&sContext); + sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */ + sqlite3SrcListDelete(db, pTabList); + sqlite3ExprListDelete(db, pChanges); + sqlite3ExprDelete(db, pWhere); + return; } -#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ +/* Make sure "isView" and other macros defined above are undefined. Otherwise +** they may interfere with compilation of other functions in this file +** (or in another file, if this file becomes part of the amalgamation). */ +#ifdef isView + #undef isView +#endif +#ifdef pTrigger + #undef pTrigger +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Analyze the SELECT statement passed as an argument to see if it -** is a min() or max() query. Return WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX if -** it is, or 0 otherwise. At present, a query is considered to be -** a min()/max() query if: +** Generate code for an UPDATE of a virtual table. +** +** The strategy is that we create an ephemeral table that contains +** for each row to be changed: +** +** (A) The original rowid of that row. +** (B) The revised rowid for the row. (note1) +** (C) The content of every column in the row. +** +** Then we loop over this ephemeral table and for each row in +** the ephemeral table call VUpdate. ** -** 1. There is a single object in the FROM clause. +** When finished, drop the ephemeral table. ** -** 2. There is a single expression in the result set, and it is -** either min(x) or max(x), where x is a column reference. +** (note1) Actually, if we know in advance that (A) is always the same +** as (B) we only store (A), then duplicate (A) when pulling +** it out of the ephemeral table before calling VUpdate. */ -static u8 minMaxQuery(Select *p){ - Expr *pExpr; - ExprList *pEList = p->pEList; +static void updateVirtualTable( + Parse *pParse, /* The parsing context */ + SrcList *pSrc, /* The virtual table to be modified */ + Table *pTab, /* The virtual table */ + ExprList *pChanges, /* The columns to change in the UPDATE statement */ + Expr *pRowid, /* Expression used to recompute the rowid */ + int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ + Expr *pWhere, /* WHERE clause of the UPDATE statement */ + int onError /* ON CONFLICT strategy */ +){ + Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */ + ExprList *pEList = 0; /* The result set of the SELECT statement */ + Select *pSelect = 0; /* The SELECT statement */ + Expr *pExpr; /* Temporary expression */ + int ephemTab; /* Table holding the result of the SELECT */ + int i; /* Loop counter */ + int addr; /* Address of top of loop */ + int iReg; /* First register in set passed to OP_VUpdate */ + sqlite3 *db = pParse->db; /* Database connection */ + const char *pVTab = (const char*)sqlite3GetVTable(db, pTab); + SelectDest dest; - if( pEList->nExpr!=1 ) return WHERE_ORDERBY_NORMAL; - pExpr = pEList->a[0].pExpr; - if( pExpr->op!=TK_AGG_FUNCTION ) return 0; - if( NEVER(ExprHasProperty(pExpr, EP_xIsSelect)) ) return 0; - pEList = pExpr->x.pList; - if( pEList==0 || pEList->nExpr!=1 ) return 0; - if( pEList->a[0].pExpr->op!=TK_AGG_COLUMN ) return WHERE_ORDERBY_NORMAL; - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - if( sqlite3StrICmp(pExpr->u.zToken,"min")==0 ){ - return WHERE_ORDERBY_MIN; - }else if( sqlite3StrICmp(pExpr->u.zToken,"max")==0 ){ - return WHERE_ORDERBY_MAX; + /* Construct the SELECT statement that will find the new values for + ** all updated rows. + */ + pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, "_rowid_")); + if( pRowid ){ + pEList = sqlite3ExprListAppend(pParse, pEList, + sqlite3ExprDup(db, pRowid, 0)); + } + assert( pTab->iPKey<0 ); + for(i=0; inCol; i++){ + if( aXRef[i]>=0 ){ + pExpr = sqlite3ExprDup(db, pChanges->a[aXRef[i]].pExpr, 0); + }else{ + pExpr = sqlite3Expr(db, TK_ID, pTab->aCol[i].zName); + } + pEList = sqlite3ExprListAppend(pParse, pEList, pExpr); + } + pSelect = sqlite3SelectNew(pParse, pEList, pSrc, pWhere, 0, 0, 0, 0, 0, 0); + + /* Create the ephemeral table into which the update results will + ** be stored. + */ + assert( v ); + ephemTab = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, pTab->nCol+1+(pRowid!=0)); + sqlite3VdbeChangeP5(v, BTREE_UNORDERED); + + /* fill the ephemeral table + */ + sqlite3SelectDestInit(&dest, SRT_Table, ephemTab); + sqlite3Select(pParse, pSelect, &dest); + + /* Generate code to scan the ephemeral table and call VUpdate. */ + iReg = ++pParse->nMem; + pParse->nMem += pTab->nCol+1; + addr = sqlite3VdbeAddOp2(v, OP_Rewind, ephemTab, 0); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Column, ephemTab, 0, iReg); + sqlite3VdbeAddOp3(v, OP_Column, ephemTab, (pRowid?1:0), iReg+1); + for(i=0; inCol; i++){ + sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i+1+(pRowid!=0), iReg+2+i); } - return WHERE_ORDERBY_NORMAL; + sqlite3VtabMakeWritable(pParse, pTab); + sqlite3VdbeAddOp4(v, OP_VUpdate, 0, pTab->nCol+2, iReg, pVTab, P4_VTAB); + sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError); + sqlite3MayAbort(pParse); + sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr); + sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0); + + /* Cleanup */ + sqlite3SelectDelete(db, pSelect); } +#endif /* SQLITE_OMIT_VIRTUALTABLE */ +/************** End of update.c **********************************************/ +/************** Begin file vacuum.c ******************************************/ /* -** The select statement passed as the first argument is an aggregate query. -** The second argment is the associated aggregate-info object. This -** function tests if the SELECT is of the form: +** 2003 April 6 ** -** SELECT count(*) FROM +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** where table is a database table, not a sub-select or view. If the query -** does match this pattern, then a pointer to the Table object representing -** is returned. Otherwise, 0 is returned. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code used to implement the VACUUM command. +** +** Most of the code in this file may be omitted by defining the +** SQLITE_OMIT_VACUUM macro. */ -static Table *isSimpleCount(Select *p, AggInfo *pAggInfo){ - Table *pTab; - Expr *pExpr; - assert( !p->pGroupBy ); +#if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH) +/* +** Finalize a prepared statement. If there was an error, store the +** text of the error message in *pzErrMsg. Return the result code. +*/ +static int vacuumFinalize(sqlite3 *db, sqlite3_stmt *pStmt, char **pzErrMsg){ + int rc; + rc = sqlite3VdbeFinalize((Vdbe*)pStmt); + if( rc ){ + sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db)); + } + return rc; +} - if( p->pWhere || p->pEList->nExpr!=1 - || p->pSrc->nSrc!=1 || p->pSrc->a[0].pSelect - ){ - return 0; +/* +** Execute zSql on database db. Return an error code. +*/ +static int execSql(sqlite3 *db, char **pzErrMsg, const char *zSql){ + sqlite3_stmt *pStmt; + VVA_ONLY( int rc; ) + if( !zSql ){ + return SQLITE_NOMEM; } - pTab = p->pSrc->a[0].pTab; - pExpr = p->pEList->a[0].pExpr; - assert( pTab && !pTab->pSelect && pExpr ); + if( SQLITE_OK!=sqlite3_prepare(db, zSql, -1, &pStmt, 0) ){ + sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db)); + return sqlite3_errcode(db); + } + VVA_ONLY( rc = ) sqlite3_step(pStmt); + assert( rc!=SQLITE_ROW || (db->flags&SQLITE_CountRows) ); + return vacuumFinalize(db, pStmt, pzErrMsg); +} - if( IsVirtual(pTab) ) return 0; - if( pExpr->op!=TK_AGG_FUNCTION ) return 0; - if( (pAggInfo->aFunc[0].pFunc->flags&SQLITE_FUNC_COUNT)==0 ) return 0; - if( pExpr->flags&EP_Distinct ) return 0; +/* +** Execute zSql on database db. The statement returns exactly +** one column. Execute this as SQL on the same database. +*/ +static int execExecSql(sqlite3 *db, char **pzErrMsg, const char *zSql){ + sqlite3_stmt *pStmt; + int rc; - return pTab; + rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); + if( rc!=SQLITE_OK ) return rc; + + while( SQLITE_ROW==sqlite3_step(pStmt) ){ + rc = execSql(db, pzErrMsg, (char*)sqlite3_column_text(pStmt, 0)); + if( rc!=SQLITE_OK ){ + vacuumFinalize(db, pStmt, pzErrMsg); + return rc; + } + } + + return vacuumFinalize(db, pStmt, pzErrMsg); } /* -** If the source-list item passed as an argument was augmented with an -** INDEXED BY clause, then try to locate the specified index. If there -** was such a clause and the named index cannot be found, return -** SQLITE_ERROR and leave an error in pParse. Otherwise, populate -** pFrom->pIndex and return SQLITE_OK. +** The VACUUM command is used to clean up the database, +** collapse free space, etc. It is modelled after the VACUUM command +** in PostgreSQL. The VACUUM command works as follows: +** +** (1) Create a new transient database file +** (2) Copy all content from the database being vacuumed into +** the new transient database file +** (3) Copy content from the transient database back into the +** original database. +** +** The transient database requires temporary disk space approximately +** equal to the size of the original database. The copy operation of +** step (3) requires additional temporary disk space approximately equal +** to the size of the original database for the rollback journal. +** Hence, temporary disk space that is approximately 2x the size of the +** original database is required. Every page of the database is written +** approximately 3 times: Once for step (2) and twice for step (3). +** Two writes per page are required in step (3) because the original +** database content must be written into the rollback journal prior to +** overwriting the database with the vacuumed content. +** +** Only 1x temporary space and only 1x writes would be required if +** the copy of step (3) were replace by deleting the original database +** and renaming the transient database as the original. But that will +** not work if other processes are attached to the original database. +** And a power loss in between deleting the original and renaming the +** transient would cause the database file to appear to be deleted +** following reboot. */ -SQLITE_PRIVATE int sqlite3IndexedByLookup(Parse *pParse, struct SrcList_item *pFrom){ - if( pFrom->pTab && pFrom->zIndex ){ - Table *pTab = pFrom->pTab; - char *zIndex = pFrom->zIndex; - Index *pIdx; - for(pIdx=pTab->pIndex; - pIdx && sqlite3StrICmp(pIdx->zName, zIndex); - pIdx=pIdx->pNext - ); - if( !pIdx ){ - sqlite3ErrorMsg(pParse, "no such index: %s", zIndex, 0); - pParse->checkSchema = 1; - return SQLITE_ERROR; - } - pFrom->pIndex = pIdx; +SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){ + Vdbe *v = sqlite3GetVdbe(pParse); + if( v ){ + sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0); + sqlite3VdbeUsesBtree(v, 0); } - return SQLITE_OK; + return; } /* -** This routine is a Walker callback for "expanding" a SELECT statement. -** "Expanding" means to do the following: -** -** (1) Make sure VDBE cursor numbers have been assigned to every -** element of the FROM clause. -** -** (2) Fill in the pTabList->a[].pTab fields in the SrcList that -** defines FROM clause. When views appear in the FROM clause, -** fill pTabList->a[].pSelect with a copy of the SELECT statement -** that implements the view. A copy is made of the view's SELECT -** statement so that we can freely modify or delete that statement -** without worrying about messing up the presistent representation -** of the view. -** -** (3) Add terms to the WHERE clause to accomodate the NATURAL keyword -** on joins and the ON and USING clause of joins. -** -** (4) Scan the list of columns in the result set (pEList) looking -** for instances of the "*" operator or the TABLE.* operator. -** If found, expand each "*" to be every column in every table -** and TABLE.* to be every column in TABLE. -** +** This routine implements the OP_Vacuum opcode of the VDBE. */ -static int selectExpander(Walker *pWalker, Select *p){ - Parse *pParse = pWalker->pParse; - int i, j, k; - SrcList *pTabList; - ExprList *pEList; - struct SrcList_item *pFrom; - sqlite3 *db = pParse->db; +SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){ + int rc = SQLITE_OK; /* Return code from service routines */ + Btree *pMain; /* The database being vacuumed */ + Btree *pTemp; /* The temporary database we vacuum into */ + char *zSql = 0; /* SQL statements */ + int saved_flags; /* Saved value of the db->flags */ + int saved_nChange; /* Saved value of db->nChange */ + int saved_nTotalChange; /* Saved value of db->nTotalChange */ + void (*saved_xTrace)(void*,const char*); /* Saved db->xTrace */ + Db *pDb = 0; /* Database to detach at end of vacuum */ + int isMemDb; /* True if vacuuming a :memory: database */ + int nRes; /* Bytes of reserved space at the end of each page */ + int nDb; /* Number of attached databases */ - if( db->mallocFailed ){ - return WRC_Abort; + if( !db->autoCommit ){ + sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction"); + return SQLITE_ERROR; } - if( NEVER(p->pSrc==0) || (p->selFlags & SF_Expanded)!=0 ){ - return WRC_Prune; + if( db->nVdbeActive>1 ){ + sqlite3SetString(pzErrMsg, db,"cannot VACUUM - SQL statements in progress"); + return SQLITE_ERROR; } - p->selFlags |= SF_Expanded; - pTabList = p->pSrc; - pEList = p->pEList; - /* Make sure cursor numbers have been assigned to all entries in - ** the FROM clause of the SELECT statement. - */ - sqlite3SrcListAssignCursors(pParse, pTabList); + /* Save the current value of the database flags so that it can be + ** restored before returning. Then set the writable-schema flag, and + ** disable CHECK and foreign key constraints. */ + saved_flags = db->flags; + saved_nChange = db->nChange; + saved_nTotalChange = db->nTotalChange; + saved_xTrace = db->xTrace; + db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks | SQLITE_PreferBuiltin; + db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder); + db->xTrace = 0; - /* Look up every table named in the FROM clause of the select. If - ** an entry of the FROM clause is a subquery instead of a table or view, - ** then create a transient table structure to describe the subquery. + pMain = db->aDb[0].pBt; + isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain)); + + /* Attach the temporary database as 'vacuum_db'. The synchronous pragma + ** can be set to 'off' for this file, as it is not recovered if a crash + ** occurs anyway. The integrity of the database is maintained by a + ** (possibly synchronous) transaction opened on the main database before + ** sqlite3BtreeCopyFile() is called. + ** + ** An optimisation would be to use a non-journaled pager. + ** (Later:) I tried setting "PRAGMA vacuum_db.journal_mode=OFF" but + ** that actually made the VACUUM run slower. Very little journalling + ** actually occurs when doing a vacuum since the vacuum_db is initially + ** empty. Only the journal header is written. Apparently it takes more + ** time to parse and run the PRAGMA to turn journalling off than it does + ** to write the journal header file. */ - for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ - Table *pTab; - if( pFrom->pTab!=0 ){ - /* This statement has already been prepared. There is no need - ** to go further. */ - assert( i==0 ); - return WRC_Prune; - } - if( pFrom->zName==0 ){ -#ifndef SQLITE_OMIT_SUBQUERY - Select *pSel = pFrom->pSelect; - /* A sub-query in the FROM clause of a SELECT */ - assert( pSel!=0 ); - assert( pFrom->pTab==0 ); - sqlite3WalkSelect(pWalker, pSel); - pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); - if( pTab==0 ) return WRC_Abort; - pTab->nRef = 1; - pTab->zName = sqlite3MPrintf(db, "sqlite_subquery_%p_", (void*)pTab); - while( pSel->pPrior ){ pSel = pSel->pPrior; } - selectColumnsFromExprList(pParse, pSel->pEList, &pTab->nCol, &pTab->aCol); - pTab->iPKey = -1; - pTab->nRowEst = 1000000; - pTab->tabFlags |= TF_Ephemeral; + nDb = db->nDb; + if( sqlite3TempInMemory(db) ){ + zSql = "ATTACH ':memory:' AS vacuum_db;"; + }else{ + zSql = "ATTACH '' AS vacuum_db;"; + } + rc = execSql(db, pzErrMsg, zSql); + if( db->nDb>nDb ){ + pDb = &db->aDb[db->nDb-1]; + assert( strcmp(pDb->zName,"vacuum_db")==0 ); + } + if( rc!=SQLITE_OK ) goto end_of_vacuum; + pTemp = db->aDb[db->nDb-1].pBt; + + /* The call to execSql() to attach the temp database has left the file + ** locked (as there was more than one active statement when the transaction + ** to read the schema was concluded. Unlock it here so that this doesn't + ** cause problems for the call to BtreeSetPageSize() below. */ + sqlite3BtreeCommit(pTemp); + + nRes = sqlite3BtreeGetReserve(pMain); + + /* A VACUUM cannot change the pagesize of an encrypted database. */ +#ifdef SQLITE_HAS_CODEC + if( db->nextPagesize ){ + extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*); + int nKey; + char *zKey; + sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey); + if( nKey ) db->nextPagesize = 0; + } #endif - }else{ - /* An ordinary table or view name in the FROM clause */ - assert( pFrom->pTab==0 ); - pFrom->pTab = pTab = - sqlite3LocateTable(pParse,0,pFrom->zName,pFrom->zDatabase); - if( pTab==0 ) return WRC_Abort; - pTab->nRef++; -#if !defined(SQLITE_OMIT_VIEW) || !defined (SQLITE_OMIT_VIRTUALTABLE) - if( pTab->pSelect || IsVirtual(pTab) ){ - /* We reach here if the named table is a really a view */ - if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort; - assert( pFrom->pSelect==0 ); - pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0); - sqlite3WalkSelect(pWalker, pFrom->pSelect); - } + + rc = execSql(db, pzErrMsg, "PRAGMA vacuum_db.synchronous=OFF"); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + + /* Begin a transaction and take an exclusive lock on the main database + ** file. This is done before the sqlite3BtreeGetPageSize(pMain) call below, + ** to ensure that we do not try to change the page-size on a WAL database. + */ + rc = execSql(db, pzErrMsg, "BEGIN;"); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + rc = sqlite3BtreeBeginTrans(pMain, 2); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + + /* Do not attempt to change the page size for a WAL database */ + if( sqlite3PagerGetJournalMode(sqlite3BtreePager(pMain)) + ==PAGER_JOURNALMODE_WAL ){ + db->nextPagesize = 0; + } + + if( sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain), nRes, 0) + || (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes, 0)) + || NEVER(db->mallocFailed) + ){ + rc = SQLITE_NOMEM; + goto end_of_vacuum; + } + +#ifndef SQLITE_OMIT_AUTOVACUUM + sqlite3BtreeSetAutoVacuum(pTemp, db->nextAutovac>=0 ? db->nextAutovac : + sqlite3BtreeGetAutoVacuum(pMain)); #endif - } - /* Locate the index named by the INDEXED BY clause, if any. */ - if( sqlite3IndexedByLookup(pParse, pFrom) ){ - return WRC_Abort; - } - } + /* Query the schema of the main database. Create a mirror schema + ** in the temporary database. + */ + rc = execExecSql(db, pzErrMsg, + "SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) " + " FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'" + " AND coalesce(rootpage,1)>0" + ); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + rc = execExecSql(db, pzErrMsg, + "SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14)" + " FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' "); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + rc = execExecSql(db, pzErrMsg, + "SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21) " + " FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'"); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + + /* Loop through the tables in the main database. For each, do + ** an "INSERT INTO vacuum_db.xxx SELECT * FROM main.xxx;" to copy + ** the contents to the temporary database. + */ + rc = execExecSql(db, pzErrMsg, + "SELECT 'INSERT INTO vacuum_db.' || quote(name) " + "|| ' SELECT * FROM main.' || quote(name) || ';'" + "FROM main.sqlite_master " + "WHERE type = 'table' AND name!='sqlite_sequence' " + " AND coalesce(rootpage,1)>0" + ); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + + /* Copy over the sequence table + */ + rc = execExecSql(db, pzErrMsg, + "SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' " + "FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' " + ); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + rc = execExecSql(db, pzErrMsg, + "SELECT 'INSERT INTO vacuum_db.' || quote(name) " + "|| ' SELECT * FROM main.' || quote(name) || ';' " + "FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';" + ); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + - /* Process NATURAL keywords, and ON and USING clauses of joins. + /* Copy the triggers, views, and virtual tables from the main database + ** over to the temporary database. None of these objects has any + ** associated storage, so all we have to do is copy their entries + ** from the SQLITE_MASTER table. */ - if( db->mallocFailed || sqliteProcessJoin(pParse, p) ){ - return WRC_Abort; - } + rc = execSql(db, pzErrMsg, + "INSERT INTO vacuum_db.sqlite_master " + " SELECT type, name, tbl_name, rootpage, sql" + " FROM main.sqlite_master" + " WHERE type='view' OR type='trigger'" + " OR (type='table' AND rootpage=0)" + ); + if( rc ) goto end_of_vacuum; - /* For every "*" that occurs in the column list, insert the names of - ** all columns in all tables. And for every TABLE.* insert the names - ** of all columns in TABLE. The parser inserted a special expression - ** with the TK_ALL operator for each "*" that it found in the column list. - ** The following code just has to locate the TK_ALL expressions and expand - ** each one to the list of all columns in all tables. - ** - ** The first loop just checks to see if there are any "*" operators - ** that need expanding. + /* At this point, there is a write transaction open on both the + ** vacuum database and the main database. Assuming no error occurs, + ** both transactions are closed by this block - the main database + ** transaction by sqlite3BtreeCopyFile() and the other by an explicit + ** call to sqlite3BtreeCommit(). */ - for(k=0; knExpr; k++){ - Expr *pE = pEList->a[k].pExpr; - if( pE->op==TK_ALL ) break; - assert( pE->op!=TK_DOT || pE->pRight!=0 ); - assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) ); - if( pE->op==TK_DOT && pE->pRight->op==TK_ALL ) break; - } - if( knExpr ){ - /* - ** If we get here it means the result set contains one or more "*" - ** operators that need to be expanded. Loop through each expression - ** in the result set and expand them one by one. - */ - struct ExprList_item *a = pEList->a; - ExprList *pNew = 0; - int flags = pParse->db->flags; - int longNames = (flags & SQLITE_FullColNames)!=0 - && (flags & SQLITE_ShortColNames)==0; + { + u32 meta; + int i; - for(k=0; knExpr; k++){ - Expr *pE = a[k].pExpr; - assert( pE->op!=TK_DOT || pE->pRight!=0 ); - if( pE->op!=TK_ALL && (pE->op!=TK_DOT || pE->pRight->op!=TK_ALL) ){ - /* This particular expression does not need to be expanded. - */ - pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr); - if( pNew ){ - pNew->a[pNew->nExpr-1].zName = a[k].zName; - pNew->a[pNew->nExpr-1].zSpan = a[k].zSpan; - a[k].zName = 0; - a[k].zSpan = 0; - } - a[k].pExpr = 0; - }else{ - /* This expression is a "*" or a "TABLE.*" and needs to be - ** expanded. */ - int tableSeen = 0; /* Set to 1 when TABLE matches */ - char *zTName; /* text of name of TABLE */ - if( pE->op==TK_DOT ){ - assert( pE->pLeft!=0 ); - assert( !ExprHasProperty(pE->pLeft, EP_IntValue) ); - zTName = pE->pLeft->u.zToken; - }else{ - zTName = 0; - } - for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ - Table *pTab = pFrom->pTab; - char *zTabName = pFrom->zAlias; - if( zTabName==0 ){ - zTabName = pTab->zName; - } - if( db->mallocFailed ) break; - if( zTName && sqlite3StrICmp(zTName, zTabName)!=0 ){ - continue; - } - tableSeen = 1; - for(j=0; jnCol; j++){ - Expr *pExpr, *pRight; - char *zName = pTab->aCol[j].zName; - char *zColname; /* The computed column name */ - char *zToFree; /* Malloced string that needs to be freed */ - Token sColname; /* Computed column name as a token */ + /* This array determines which meta meta values are preserved in the + ** vacuum. Even entries are the meta value number and odd entries + ** are an increment to apply to the meta value after the vacuum. + ** The increment is used to increase the schema cookie so that other + ** connections to the same database will know to reread the schema. + */ + static const unsigned char aCopy[] = { + BTREE_SCHEMA_VERSION, 1, /* Add one to the old schema cookie */ + BTREE_DEFAULT_CACHE_SIZE, 0, /* Preserve the default page cache size */ + BTREE_TEXT_ENCODING, 0, /* Preserve the text encoding */ + BTREE_USER_VERSION, 0, /* Preserve the user version */ + BTREE_APPLICATION_ID, 0, /* Preserve the application id */ + }; - /* If a column is marked as 'hidden' (currently only possible - ** for virtual tables), do not include it in the expanded - ** result-set list. - */ - if( IsHiddenColumn(&pTab->aCol[j]) ){ - assert(IsVirtual(pTab)); - continue; - } + assert( 1==sqlite3BtreeIsInTrans(pTemp) ); + assert( 1==sqlite3BtreeIsInTrans(pMain) ); - if( i>0 && zTName==0 ){ - if( (pFrom->jointype & JT_NATURAL)!=0 - && tableAndColumnIndex(pTabList, i, zName, 0, 0) - ){ - /* In a NATURAL join, omit the join columns from the - ** table to the right of the join */ - continue; - } - if( sqlite3IdListIndex(pFrom->pUsing, zName)>=0 ){ - /* In a join with a USING clause, omit columns in the - ** using clause from the table on the right. */ - continue; - } - } - pRight = sqlite3Expr(db, TK_ID, zName); - zColname = zName; - zToFree = 0; - if( longNames || pTabList->nSrc>1 ){ - Expr *pLeft; - pLeft = sqlite3Expr(db, TK_ID, zTabName); - pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); - if( longNames ){ - zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName); - zToFree = zColname; - } - }else{ - pExpr = pRight; - } - pNew = sqlite3ExprListAppend(pParse, pNew, pExpr); - sColname.z = zColname; - sColname.n = sqlite3Strlen30(zColname); - sqlite3ExprListSetName(pParse, pNew, &sColname, 0); - sqlite3DbFree(db, zToFree); - } - } - if( !tableSeen ){ - if( zTName ){ - sqlite3ErrorMsg(pParse, "no such table: %s", zTName); - }else{ - sqlite3ErrorMsg(pParse, "no tables specified"); - } - } - } + /* Copy Btree meta values */ + for(i=0; ipEList = pNew; + + rc = sqlite3BtreeCopyFile(pMain, pTemp); + if( rc!=SQLITE_OK ) goto end_of_vacuum; + rc = sqlite3BtreeCommit(pTemp); + if( rc!=SQLITE_OK ) goto end_of_vacuum; +#ifndef SQLITE_OMIT_AUTOVACUUM + sqlite3BtreeSetAutoVacuum(pMain, sqlite3BtreeGetAutoVacuum(pTemp)); +#endif } -#if SQLITE_MAX_COLUMN - if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many columns in result set"); + + assert( rc==SQLITE_OK ); + rc = sqlite3BtreeSetPageSize(pMain, sqlite3BtreeGetPageSize(pTemp), nRes,1); + +end_of_vacuum: + /* Restore the original value of db->flags */ + db->flags = saved_flags; + db->nChange = saved_nChange; + db->nTotalChange = saved_nTotalChange; + db->xTrace = saved_xTrace; + sqlite3BtreeSetPageSize(pMain, -1, -1, 1); + + /* Currently there is an SQL level transaction open on the vacuum + ** database. No locks are held on any other files (since the main file + ** was committed at the btree level). So it safe to end the transaction + ** by manually setting the autoCommit flag to true and detaching the + ** vacuum database. The vacuum_db journal file is deleted when the pager + ** is closed by the DETACH. + */ + db->autoCommit = 1; + + if( pDb ){ + sqlite3BtreeClose(pDb->pBt); + pDb->pBt = 0; + pDb->pSchema = 0; } -#endif - return WRC_Continue; -} -/* -** No-op routine for the parse-tree walker. -** -** When this routine is the Walker.xExprCallback then expression trees -** are walked without any actions being taken at each node. Presumably, -** when this routine is used for Walker.xExprCallback then -** Walker.xSelectCallback is set to do something useful for every -** subquery in the parser tree. -*/ -static int exprWalkNoop(Walker *NotUsed, Expr *NotUsed2){ - UNUSED_PARAMETER2(NotUsed, NotUsed2); - return WRC_Continue; + /* This both clears the schemas and reduces the size of the db->aDb[] + ** array. */ + sqlite3ResetAllSchemasOfConnection(db); + + return rc; } +#endif /* SQLITE_OMIT_VACUUM && SQLITE_OMIT_ATTACH */ + +/************** End of vacuum.c **********************************************/ +/************** Begin file vtab.c ********************************************/ /* -** This routine "expands" a SELECT statement and all of its subqueries. -** For additional information on what it means to "expand" a SELECT -** statement, see the comment on the selectExpand worker callback above. +** 2006 June 10 ** -** Expanding a SELECT statement is the first step in processing a -** SELECT statement. The SELECT statement must be expanded before -** name resolution is performed. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** If anything goes wrong, an error message is written into pParse. -** The calling function can detect the problem by looking at pParse->nErr -** and/or pParse->db->mallocFailed. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code used to help implement virtual tables. */ -static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){ - Walker w; - w.xSelectCallback = selectExpander; - w.xExprCallback = exprWalkNoop; - w.pParse = pParse; - sqlite3WalkSelect(&w, pSelect); -} +#ifndef SQLITE_OMIT_VIRTUALTABLE +/* +** Before a virtual table xCreate() or xConnect() method is invoked, the +** sqlite3.pVtabCtx member variable is set to point to an instance of +** this struct allocated on the stack. It is used by the implementation of +** the sqlite3_declare_vtab() and sqlite3_vtab_config() APIs, both of which +** are invoked only from within xCreate and xConnect methods. +*/ +struct VtabCtx { + VTable *pVTable; /* The virtual table being constructed */ + Table *pTab; /* The Table object to which the virtual table belongs */ +}; -#ifndef SQLITE_OMIT_SUBQUERY /* -** This is a Walker.xSelectCallback callback for the sqlite3SelectTypeInfo() -** interface. -** -** For each FROM-clause subquery, add Column.zType and Column.zColl -** information to the Table structure that represents the result set -** of that subquery. -** -** The Table structure that represents the result set was constructed -** by selectExpander() but the type and collation information was omitted -** at that point because identifiers had not yet been resolved. This -** routine is called after identifier resolution. +** The actual function that does the work of creating a new module. +** This function implements the sqlite3_create_module() and +** sqlite3_create_module_v2() interfaces. */ -static int selectAddSubqueryTypeInfo(Walker *pWalker, Select *p){ - Parse *pParse; - int i; - SrcList *pTabList; - struct SrcList_item *pFrom; +static int createModule( + sqlite3 *db, /* Database in which module is registered */ + const char *zName, /* Name assigned to this module */ + const sqlite3_module *pModule, /* The definition of the module */ + void *pAux, /* Context pointer for xCreate/xConnect */ + void (*xDestroy)(void *) /* Module destructor function */ +){ + int rc = SQLITE_OK; + int nName; - assert( p->selFlags & SF_Resolved ); - if( (p->selFlags & SF_HasTypeInfo)==0 ){ - p->selFlags |= SF_HasTypeInfo; - pParse = pWalker->pParse; - pTabList = p->pSrc; - for(i=0, pFrom=pTabList->a; inSrc; i++, pFrom++){ - Table *pTab = pFrom->pTab; - if( ALWAYS(pTab!=0) && (pTab->tabFlags & TF_Ephemeral)!=0 ){ - /* A sub-query in the FROM clause of a SELECT */ - Select *pSel = pFrom->pSelect; - assert( pSel ); - while( pSel->pPrior ) pSel = pSel->pPrior; - selectAddColumnTypeAndCollation(pParse, pTab->nCol, pTab->aCol, pSel); + sqlite3_mutex_enter(db->mutex); + nName = sqlite3Strlen30(zName); + if( sqlite3HashFind(&db->aModule, zName) ){ + rc = SQLITE_MISUSE_BKPT; + }else{ + Module *pMod; + pMod = (Module *)sqlite3DbMallocRaw(db, sizeof(Module) + nName + 1); + if( pMod ){ + Module *pDel; + char *zCopy = (char *)(&pMod[1]); + memcpy(zCopy, zName, nName+1); + pMod->zName = zCopy; + pMod->pModule = pModule; + pMod->pAux = pAux; + pMod->xDestroy = xDestroy; + pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod); + assert( pDel==0 || pDel==pMod ); + if( pDel ){ + db->mallocFailed = 1; + sqlite3DbFree(db, pDel); } } } - return WRC_Continue; + rc = sqlite3ApiExit(db, rc); + if( rc!=SQLITE_OK && xDestroy ) xDestroy(pAux); + + sqlite3_mutex_leave(db->mutex); + return rc; } -#endif /* -** This routine adds datatype and collating sequence information to -** the Table structures of all FROM-clause subqueries in a -** SELECT statement. -** -** Use this routine after name resolution. +** External API function used to create a new virtual-table module. */ -static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){ -#ifndef SQLITE_OMIT_SUBQUERY - Walker w; - w.xSelectCallback = selectAddSubqueryTypeInfo; - w.xExprCallback = exprWalkNoop; - w.pParse = pParse; - sqlite3WalkSelect(&w, pSelect); -#endif +SQLITE_API int sqlite3_create_module( + sqlite3 *db, /* Database in which module is registered */ + const char *zName, /* Name assigned to this module */ + const sqlite3_module *pModule, /* The definition of the module */ + void *pAux /* Context pointer for xCreate/xConnect */ +){ + return createModule(db, zName, pModule, pAux, 0); } - /* -** This routine sets of a SELECT statement for processing. The -** following is accomplished: -** -** * VDBE Cursor numbers are assigned to all FROM-clause terms. -** * Ephemeral Table objects are created for all FROM-clause subqueries. -** * ON and USING clauses are shifted into WHERE statements -** * Wildcards "*" and "TABLE.*" in result sets are expanded. -** * Identifiers in expression are matched to tables. -** -** This routine acts recursively on all subqueries within the SELECT. +** External API function used to create a new virtual-table module. */ -SQLITE_PRIVATE void sqlite3SelectPrep( - Parse *pParse, /* The parser context */ - Select *p, /* The SELECT statement being coded. */ - NameContext *pOuterNC /* Name context for container */ +SQLITE_API int sqlite3_create_module_v2( + sqlite3 *db, /* Database in which module is registered */ + const char *zName, /* Name assigned to this module */ + const sqlite3_module *pModule, /* The definition of the module */ + void *pAux, /* Context pointer for xCreate/xConnect */ + void (*xDestroy)(void *) /* Module destructor function */ ){ - sqlite3 *db; - if( NEVER(p==0) ) return; - db = pParse->db; - if( p->selFlags & SF_HasTypeInfo ) return; - sqlite3SelectExpand(pParse, p); - if( pParse->nErr || db->mallocFailed ) return; - sqlite3ResolveSelectNames(pParse, p, pOuterNC); - if( pParse->nErr || db->mallocFailed ) return; - sqlite3SelectAddTypeInfo(pParse, p); + return createModule(db, zName, pModule, pAux, xDestroy); } /* -** Reset the aggregate accumulator. +** Lock the virtual table so that it cannot be disconnected. +** Locks nest. Every lock should have a corresponding unlock. +** If an unlock is omitted, resources leaks will occur. ** -** The aggregate accumulator is a set of memory cells that hold -** intermediate results while calculating an aggregate. This -** routine simply stores NULLs in all of those memory cells. +** If a disconnect is attempted while a virtual table is locked, +** the disconnect is deferred until all locks have been removed. */ -static void resetAccumulator(Parse *pParse, AggInfo *pAggInfo){ - Vdbe *v = pParse->pVdbe; - int i; - struct AggInfo_func *pFunc; - if( pAggInfo->nFunc+pAggInfo->nColumn==0 ){ - return; - } - for(i=0; inColumn; i++){ - sqlite3VdbeAddOp2(v, OP_Null, 0, pAggInfo->aCol[i].iMem); - } - for(pFunc=pAggInfo->aFunc, i=0; inFunc; i++, pFunc++){ - sqlite3VdbeAddOp2(v, OP_Null, 0, pFunc->iMem); - if( pFunc->iDistinct>=0 ){ - Expr *pE = pFunc->pExpr; - assert( !ExprHasProperty(pE, EP_xIsSelect) ); - if( pE->x.pList==0 || pE->x.pList->nExpr!=1 ){ - sqlite3ErrorMsg(pParse, "DISTINCT aggregates must have exactly one " - "argument"); - pFunc->iDistinct = -1; - }else{ - KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList); - sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0, - (char*)pKeyInfo, P4_KEYINFO_HANDOFF); - } - } - } +SQLITE_PRIVATE void sqlite3VtabLock(VTable *pVTab){ + pVTab->nRef++; } + /* -** Invoke the OP_AggFinalize opcode for every aggregate function -** in the AggInfo structure. +** pTab is a pointer to a Table structure representing a virtual-table. +** Return a pointer to the VTable object used by connection db to access +** this virtual-table, if one has been created, or NULL otherwise. */ -static void finalizeAggFunctions(Parse *pParse, AggInfo *pAggInfo){ - Vdbe *v = pParse->pVdbe; - int i; - struct AggInfo_func *pF; - for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ - ExprList *pList = pF->pExpr->x.pList; - assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); - sqlite3VdbeAddOp4(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0, 0, - (void*)pF->pFunc, P4_FUNCDEF); - } +SQLITE_PRIVATE VTable *sqlite3GetVTable(sqlite3 *db, Table *pTab){ + VTable *pVtab; + assert( IsVirtual(pTab) ); + for(pVtab=pTab->pVTable; pVtab && pVtab->db!=db; pVtab=pVtab->pNext); + return pVtab; } /* -** Update the accumulator memory cells for an aggregate based on -** the current cursor position. +** Decrement the ref-count on a virtual table object. When the ref-count +** reaches zero, call the xDisconnect() method to delete the object. */ -static void updateAccumulator(Parse *pParse, AggInfo *pAggInfo){ - Vdbe *v = pParse->pVdbe; - int i; - struct AggInfo_func *pF; - struct AggInfo_col *pC; +SQLITE_PRIVATE void sqlite3VtabUnlock(VTable *pVTab){ + sqlite3 *db = pVTab->db; - pAggInfo->directMode = 1; - sqlite3ExprCacheClear(pParse); - for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ - int nArg; - int addrNext = 0; - int regAgg; - ExprList *pList = pF->pExpr->x.pList; - assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); - if( pList ){ - nArg = pList->nExpr; - regAgg = sqlite3GetTempRange(pParse, nArg); - sqlite3ExprCodeExprList(pParse, pList, regAgg, 1); - }else{ - nArg = 0; - regAgg = 0; - } - if( pF->iDistinct>=0 ){ - addrNext = sqlite3VdbeMakeLabel(v); - assert( nArg==1 ); - codeDistinct(pParse, pF->iDistinct, addrNext, 1, regAgg); - } - if( pF->pFunc->flags & SQLITE_FUNC_NEEDCOLL ){ - CollSeq *pColl = 0; - struct ExprList_item *pItem; - int j; - assert( pList!=0 ); /* pList!=0 if pF->pFunc has NEEDCOLL */ - for(j=0, pItem=pList->a; !pColl && jpExpr); - } - if( !pColl ){ - pColl = pParse->db->pDfltColl; - } - sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ); - } - sqlite3VdbeAddOp4(v, OP_AggStep, 0, regAgg, pF->iMem, - (void*)pF->pFunc, P4_FUNCDEF); - sqlite3VdbeChangeP5(v, (u8)nArg); - sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg); - sqlite3ReleaseTempRange(pParse, regAgg, nArg); - if( addrNext ){ - sqlite3VdbeResolveLabel(v, addrNext); - sqlite3ExprCacheClear(pParse); + assert( db ); + assert( pVTab->nRef>0 ); + assert( db->magic==SQLITE_MAGIC_OPEN || db->magic==SQLITE_MAGIC_ZOMBIE ); + + pVTab->nRef--; + if( pVTab->nRef==0 ){ + sqlite3_vtab *p = pVTab->pVtab; + if( p ){ + p->pModule->xDisconnect(p); } + sqlite3DbFree(db, pVTab); } +} - /* Before populating the accumulator registers, clear the column cache. - ** Otherwise, if any of the required column values are already present - ** in registers, sqlite3ExprCode() may use OP_SCopy to copy the value - ** to pC->iMem. But by the time the value is used, the original register - ** may have been used, invalidating the underlying buffer holding the - ** text or blob value. See ticket [883034dcb5]. - ** - ** Another solution would be to change the OP_SCopy used to copy cached - ** values to an OP_Copy. +/* +** Table p is a virtual table. This function moves all elements in the +** p->pVTable list to the sqlite3.pDisconnect lists of their associated +** database connections to be disconnected at the next opportunity. +** Except, if argument db is not NULL, then the entry associated with +** connection db is left in the p->pVTable list. +*/ +static VTable *vtabDisconnectAll(sqlite3 *db, Table *p){ + VTable *pRet = 0; + VTable *pVTable = p->pVTable; + p->pVTable = 0; + + /* Assert that the mutex (if any) associated with the BtShared database + ** that contains table p is held by the caller. See header comments + ** above function sqlite3VtabUnlockList() for an explanation of why + ** this makes it safe to access the sqlite3.pDisconnect list of any + ** database connection that may have an entry in the p->pVTable list. */ - sqlite3ExprCacheClear(pParse); - for(i=0, pC=pAggInfo->aCol; inAccumulator; i++, pC++){ - sqlite3ExprCode(pParse, pC->pExpr, pC->iMem); + assert( db==0 || sqlite3SchemaMutexHeld(db, 0, p->pSchema) ); + + while( pVTable ){ + sqlite3 *db2 = pVTable->db; + VTable *pNext = pVTable->pNext; + assert( db2 ); + if( db2==db ){ + pRet = pVTable; + p->pVTable = pRet; + pRet->pNext = 0; + }else{ + pVTable->pNext = db2->pDisconnect; + db2->pDisconnect = pVTable; + } + pVTable = pNext; } - pAggInfo->directMode = 0; - sqlite3ExprCacheClear(pParse); + + assert( !db || pRet ); + return pRet; } /* -** Add a single OP_Explain instruction to the VDBE to explain a simple -** count(*) query ("SELECT count(*) FROM pTab"). +** Table *p is a virtual table. This function removes the VTable object +** for table *p associated with database connection db from the linked +** list in p->pVTab. It also decrements the VTable ref count. This is +** used when closing database connection db to free all of its VTable +** objects without disturbing the rest of the Schema object (which may +** be being used by other shared-cache connections). */ -#ifndef SQLITE_OMIT_EXPLAIN -static void explainSimpleCount( - Parse *pParse, /* Parse context */ - Table *pTab, /* Table being queried */ - Index *pIdx /* Index used to optimize scan, or NULL */ -){ - if( pParse->explain==2 ){ - char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s %s%s(~%d rows)", - pTab->zName, - pIdx ? "USING COVERING INDEX " : "", - pIdx ? pIdx->zName : "", - pTab->nRowEst - ); - sqlite3VdbeAddOp4( - pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC - ); +SQLITE_PRIVATE void sqlite3VtabDisconnect(sqlite3 *db, Table *p){ + VTable **ppVTab; + + assert( IsVirtual(p) ); + assert( sqlite3BtreeHoldsAllMutexes(db) ); + assert( sqlite3_mutex_held(db->mutex) ); + + for(ppVTab=&p->pVTable; *ppVTab; ppVTab=&(*ppVTab)->pNext){ + if( (*ppVTab)->db==db ){ + VTable *pVTab = *ppVTab; + *ppVTab = pVTab->pNext; + sqlite3VtabUnlock(pVTab); + break; + } } } -#else -# define explainSimpleCount(a,b,c) -#endif + /* -** Generate code for the SELECT statement given in the p argument. -** -** The results are distributed in various ways depending on the -** contents of the SelectDest structure pointed to by argument pDest -** as follows: -** -** pDest->eDest Result -** ------------ ------------------------------------------- -** SRT_Output Generate a row of output (using the OP_ResultRow -** opcode) for each row in the result set. -** -** SRT_Mem Only valid if the result is a single column. -** Store the first column of the first result row -** in register pDest->iParm then abandon the rest -** of the query. This destination implies "LIMIT 1". -** -** SRT_Set The result must be a single column. Store each -** row of result as the key in table pDest->iParm. -** Apply the affinity pDest->affinity before storing -** results. Used to implement "IN (SELECT ...)". -** -** SRT_Union Store results as a key in a temporary table pDest->iParm. -** -** SRT_Except Remove results from the temporary table pDest->iParm. -** -** SRT_Table Store results in temporary table pDest->iParm. -** This is like SRT_EphemTab except that the table -** is assumed to already be open. -** -** SRT_EphemTab Create an temporary table pDest->iParm and store -** the result there. The cursor is left open after -** returning. This is like SRT_Table except that -** this destination uses OP_OpenEphemeral to create -** the table first. -** -** SRT_Coroutine Generate a co-routine that returns a new row of -** results each time it is invoked. The entry point -** of the co-routine is stored in register pDest->iParm. +** Disconnect all the virtual table objects in the sqlite3.pDisconnect list. ** -** SRT_Exists Store a 1 in memory cell pDest->iParm if the result -** set is not empty. +** This function may only be called when the mutexes associated with all +** shared b-tree databases opened using connection db are held by the +** caller. This is done to protect the sqlite3.pDisconnect list. The +** sqlite3.pDisconnect list is accessed only as follows: ** -** SRT_Discard Throw the results away. This is used by SELECT -** statements within triggers whose only purpose is -** the side-effects of functions. +** 1) By this function. In this case, all BtShared mutexes and the mutex +** associated with the database handle itself must be held. ** -** This routine returns the number of errors. If any errors are -** encountered, then an appropriate error message is left in -** pParse->zErrMsg. +** 2) By function vtabDisconnectAll(), when it adds a VTable entry to +** the sqlite3.pDisconnect list. In this case either the BtShared mutex +** associated with the database the virtual table is stored in is held +** or, if the virtual table is stored in a non-sharable database, then +** the database handle mutex is held. ** -** This routine does NOT free the Select structure passed in. The -** calling function needs to do that. +** As a result, a sqlite3.pDisconnect cannot be accessed simultaneously +** by multiple threads. It is thread-safe. */ -SQLITE_PRIVATE int sqlite3Select( - Parse *pParse, /* The parser context */ - Select *p, /* The SELECT statement being coded. */ - SelectDest *pDest /* What to do with the query results */ -){ - int i, j; /* Loop counters */ - WhereInfo *pWInfo; /* Return from sqlite3WhereBegin() */ - Vdbe *v; /* The virtual machine under construction */ - int isAgg; /* True for select lists like "count(*)" */ - ExprList *pEList; /* List of columns to extract. */ - SrcList *pTabList; /* List of tables to select from */ - Expr *pWhere; /* The WHERE clause. May be NULL */ - ExprList *pOrderBy; /* The ORDER BY clause. May be NULL */ - ExprList *pGroupBy; /* The GROUP BY clause. May be NULL */ - Expr *pHaving; /* The HAVING clause. May be NULL */ - int isDistinct; /* True if the DISTINCT keyword is present */ - int distinct; /* Table to use for the distinct set */ - int rc = 1; /* Value to return from this function */ - int addrSortIndex; /* Address of an OP_OpenEphemeral instruction */ - AggInfo sAggInfo; /* Information used by aggregate queries */ - int iEnd; /* Address of the end of the query */ - sqlite3 *db; /* The database connection */ +SQLITE_PRIVATE void sqlite3VtabUnlockList(sqlite3 *db){ + VTable *p = db->pDisconnect; + db->pDisconnect = 0; -#ifndef SQLITE_OMIT_EXPLAIN - int iRestoreSelectId = pParse->iSelectId; - pParse->iSelectId = pParse->iNextSelectId++; -#endif + assert( sqlite3BtreeHoldsAllMutexes(db) ); + assert( sqlite3_mutex_held(db->mutex) ); - db = pParse->db; - if( p==0 || db->mallocFailed || pParse->nErr ){ - return 1; + if( p ){ + sqlite3ExpirePreparedStatements(db); + do { + VTable *pNext = p->pNext; + sqlite3VtabUnlock(p); + p = pNext; + }while( p ); } - if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; - memset(&sAggInfo, 0, sizeof(sAggInfo)); +} - if( IgnorableOrderby(pDest) ){ - assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union || - pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard); - /* If ORDER BY makes no difference in the output then neither does - ** DISTINCT so it can be removed too. */ - sqlite3ExprListDelete(db, p->pOrderBy); - p->pOrderBy = 0; - p->selFlags &= ~SF_Distinct; - } - sqlite3SelectPrep(pParse, p, 0); - pOrderBy = p->pOrderBy; - pTabList = p->pSrc; - pEList = p->pEList; - if( pParse->nErr || db->mallocFailed ){ - goto select_end; +/* +** Clear any and all virtual-table information from the Table record. +** This routine is called, for example, just before deleting the Table +** record. +** +** Since it is a virtual-table, the Table structure contains a pointer +** to the head of a linked list of VTable structures. Each VTable +** structure is associated with a single sqlite3* user of the schema. +** The reference count of the VTable structure associated with database +** connection db is decremented immediately (which may lead to the +** structure being xDisconnected and free). Any other VTable structures +** in the list are moved to the sqlite3.pDisconnect list of the associated +** database connection. +*/ +SQLITE_PRIVATE void sqlite3VtabClear(sqlite3 *db, Table *p){ + if( !db || db->pnBytesFreed==0 ) vtabDisconnectAll(0, p); + if( p->azModuleArg ){ + int i; + for(i=0; inModuleArg; i++){ + if( i!=1 ) sqlite3DbFree(db, p->azModuleArg[i]); + } + sqlite3DbFree(db, p->azModuleArg); } - isAgg = (p->selFlags & SF_Aggregate)!=0; - assert( pEList!=0 ); - - /* Begin generating code. - */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto select_end; +} - /* If writing to memory or generating a set - ** only a single column may be output. - */ -#ifndef SQLITE_OMIT_SUBQUERY - if( checkForMultiColumnSelectError(pParse, pDest, pEList->nExpr) ){ - goto select_end; +/* +** Add a new module argument to pTable->azModuleArg[]. +** The string is not copied - the pointer is stored. The +** string will be freed automatically when the table is +** deleted. +*/ +static void addModuleArgument(sqlite3 *db, Table *pTable, char *zArg){ + int i = pTable->nModuleArg++; + int nBytes = sizeof(char *)*(1+pTable->nModuleArg); + char **azModuleArg; + azModuleArg = sqlite3DbRealloc(db, pTable->azModuleArg, nBytes); + if( azModuleArg==0 ){ + int j; + for(j=0; jazModuleArg[j]); + } + sqlite3DbFree(db, zArg); + sqlite3DbFree(db, pTable->azModuleArg); + pTable->nModuleArg = 0; + }else{ + azModuleArg[i] = zArg; + azModuleArg[i+1] = 0; } -#endif + pTable->azModuleArg = azModuleArg; +} - /* Generate code for all sub-queries in the FROM clause - */ -#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) - for(i=0; !p->pPrior && inSrc; i++){ - struct SrcList_item *pItem = &pTabList->a[i]; - SelectDest dest; - Select *pSub = pItem->pSelect; - int isAggSub; +/* +** The parser calls this routine when it first sees a CREATE VIRTUAL TABLE +** statement. The module name has been parsed, but the optional list +** of parameters that follow the module name are still pending. +*/ +SQLITE_PRIVATE void sqlite3VtabBeginParse( + Parse *pParse, /* Parsing context */ + Token *pName1, /* Name of new table, or database name */ + Token *pName2, /* Name of new table or NULL */ + Token *pModuleName, /* Name of the module for the virtual table */ + int ifNotExists /* No error if the table already exists */ +){ + int iDb; /* The database the table is being created in */ + Table *pTable; /* The new virtual table */ + sqlite3 *db; /* Database connection */ - if( pSub==0 || pItem->isPopulated ) continue; + sqlite3StartTable(pParse, pName1, pName2, 0, 0, 1, ifNotExists); + pTable = pParse->pNewTable; + if( pTable==0 ) return; + assert( 0==pTable->pIndex ); - /* Increment Parse.nHeight by the height of the largest expression - ** tree refered to by this, the parent select. The child select - ** may contain expression trees of at most - ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit - ** more conservative than necessary, but much easier than enforcing - ** an exact limit. - */ - pParse->nHeight += sqlite3SelectExprHeight(p); + db = pParse->db; + iDb = sqlite3SchemaToIndex(db, pTable->pSchema); + assert( iDb>=0 ); - /* Check to see if the subquery can be absorbed into the parent. */ - isAggSub = (pSub->selFlags & SF_Aggregate)!=0; - if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){ - if( isAggSub ){ - isAgg = 1; - p->selFlags |= SF_Aggregate; - } - i = -1; - }else{ - sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); - assert( pItem->isPopulated==0 ); - explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); - sqlite3Select(pParse, pSub, &dest); - pItem->isPopulated = 1; - pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow; - } - if( /*pParse->nErr ||*/ db->mallocFailed ){ - goto select_end; - } - pParse->nHeight -= sqlite3SelectExprHeight(p); - pTabList = p->pSrc; - if( !IgnorableOrderby(pDest) ){ - pOrderBy = p->pOrderBy; - } - } - pEList = p->pEList; -#endif - pWhere = p->pWhere; - pGroupBy = p->pGroupBy; - pHaving = p->pHaving; - isDistinct = (p->selFlags & SF_Distinct)!=0; + pTable->tabFlags |= TF_Virtual; + pTable->nModuleArg = 0; + addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName)); + addModuleArgument(db, pTable, 0); + addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName)); + pParse->sNameToken.n = (int)(&pModuleName->z[pModuleName->n] - pName1->z); -#ifndef SQLITE_OMIT_COMPOUND_SELECT - /* If there is are a sequence of queries, do the earlier ones first. +#ifndef SQLITE_OMIT_AUTHORIZATION + /* Creating a virtual table invokes the authorization callback twice. + ** The first invocation, to obtain permission to INSERT a row into the + ** sqlite_master table, has already been made by sqlite3StartTable(). + ** The second call, to obtain permission to create the table, is made now. */ - if( p->pPrior ){ - if( p->pRightmost==0 ){ - Select *pLoop, *pRight = 0; - int cnt = 0; - int mxSelect; - for(pLoop=p; pLoop; pLoop=pLoop->pPrior, cnt++){ - pLoop->pRightmost = p; - pLoop->pNext = pRight; - pRight = pLoop; - } - mxSelect = db->aLimit[SQLITE_LIMIT_COMPOUND_SELECT]; - if( mxSelect && cnt>mxSelect ){ - sqlite3ErrorMsg(pParse, "too many terms in compound SELECT"); - goto select_end; - } - } - rc = multiSelect(pParse, p, pDest); - explainSetInteger(pParse->iSelectId, iRestoreSelectId); - return rc; + if( pTable->azModuleArg ){ + sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName, + pTable->azModuleArg[0], pParse->db->aDb[iDb].zName); } #endif +} - /* If possible, rewrite the query to use GROUP BY instead of DISTINCT. - ** GROUP BY might use an index, DISTINCT never does. - */ - assert( p->pGroupBy==0 || (p->selFlags & SF_Aggregate)!=0 ); - if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ){ - p->pGroupBy = sqlite3ExprListDup(db, p->pEList, 0); - pGroupBy = p->pGroupBy; - p->selFlags &= ~SF_Distinct; - } - - /* If there is both a GROUP BY and an ORDER BY clause and they are - ** identical, then disable the ORDER BY clause since the GROUP BY - ** will cause elements to come out in the correct order. This is - ** an optimization - the correct answer should result regardless. - ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER - ** to disable this optimization for testing purposes. - */ - if( sqlite3ExprListCompare(p->pGroupBy, pOrderBy)==0 - && (db->flags & SQLITE_GroupByOrder)==0 ){ - pOrderBy = 0; - } - - /* If there is an ORDER BY clause, then this sorting - ** index might end up being unused if the data can be - ** extracted in pre-sorted order. If that is the case, then the - ** OP_OpenEphemeral instruction will be changed to an OP_Noop once - ** we figure out that the sorting index is not needed. The addrSortIndex - ** variable is used to facilitate that change. - */ - if( pOrderBy ){ - KeyInfo *pKeyInfo; - pKeyInfo = keyInfoFromExprList(pParse, pOrderBy); - pOrderBy->iECursor = pParse->nTab++; - p->addrOpenEphm[2] = addrSortIndex = - sqlite3VdbeAddOp4(v, OP_OpenEphemeral, - pOrderBy->iECursor, pOrderBy->nExpr+2, 0, - (char*)pKeyInfo, P4_KEYINFO_HANDOFF); - }else{ - addrSortIndex = -1; - } - - /* If the output is destined for a temporary table, open that table. - */ - if( pDest->eDest==SRT_EphemTab ){ - sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pDest->iParm, pEList->nExpr); +/* +** This routine takes the module argument that has been accumulating +** in pParse->zArg[] and appends it to the list of arguments on the +** virtual table currently under construction in pParse->pTable. +*/ +static void addArgumentToVtab(Parse *pParse){ + if( pParse->sArg.z && pParse->pNewTable ){ + const char *z = (const char*)pParse->sArg.z; + int n = pParse->sArg.n; + sqlite3 *db = pParse->db; + addModuleArgument(db, pParse->pNewTable, sqlite3DbStrNDup(db, z, n)); } +} - /* Set the limiter. - */ - iEnd = sqlite3VdbeMakeLabel(v); - p->nSelectRow = (double)LARGEST_INT64; - computeLimitRegisters(pParse, p, iEnd); +/* +** The parser calls this routine after the CREATE VIRTUAL TABLE statement +** has been completely parsed. +*/ +SQLITE_PRIVATE void sqlite3VtabFinishParse(Parse *pParse, Token *pEnd){ + Table *pTab = pParse->pNewTable; /* The table being constructed */ + sqlite3 *db = pParse->db; /* The database connection */ - /* Open a virtual index to use for the distinct set. + if( pTab==0 ) return; + addArgumentToVtab(pParse); + pParse->sArg.z = 0; + if( pTab->nModuleArg<1 ) return; + + /* If the CREATE VIRTUAL TABLE statement is being entered for the + ** first time (in other words if the virtual table is actually being + ** created now instead of just being read out of sqlite_master) then + ** do additional initialization work and store the statement text + ** in the sqlite_master table. */ - if( p->selFlags & SF_Distinct ){ - KeyInfo *pKeyInfo; - assert( isAgg || pGroupBy ); - distinct = pParse->nTab++; - pKeyInfo = keyInfoFromExprList(pParse, p->pEList); - sqlite3VdbeAddOp4(v, OP_OpenEphemeral, distinct, 0, 0, - (char*)pKeyInfo, P4_KEYINFO_HANDOFF); - sqlite3VdbeChangeP5(v, BTREE_UNORDERED); - }else{ - distinct = -1; - } - - /* Aggregate and non-aggregate queries are handled differently */ - if( !isAgg && pGroupBy==0 ){ - /* This case is for non-aggregate queries - ** Begin the database scan - */ - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, &pOrderBy, 0); - if( pWInfo==0 ) goto select_end; - if( pWInfo->nRowOut < p->nSelectRow ) p->nSelectRow = pWInfo->nRowOut; + if( !db->init.busy ){ + char *zStmt; + char *zWhere; + int iDb; + Vdbe *v; - /* If sorting index that was created by a prior OP_OpenEphemeral - ** instruction ended up not being needed, then change the OP_OpenEphemeral - ** into an OP_Noop. - */ - if( addrSortIndex>=0 && pOrderBy==0 ){ - sqlite3VdbeChangeToNoop(v, addrSortIndex, 1); - p->addrOpenEphm[2] = -1; + /* Compute the complete text of the CREATE VIRTUAL TABLE statement */ + if( pEnd ){ + pParse->sNameToken.n = (int)(pEnd->z - pParse->sNameToken.z) + pEnd->n; } + zStmt = sqlite3MPrintf(db, "CREATE VIRTUAL TABLE %T", &pParse->sNameToken); - /* Use the standard inner loop - */ - assert(!isDistinct); - selectInnerLoop(pParse, p, pEList, 0, 0, pOrderBy, -1, pDest, - pWInfo->iContinue, pWInfo->iBreak); - - /* End the database scan loop. + /* A slot for the record has already been allocated in the + ** SQLITE_MASTER table. We just need to update that slot with all + ** the information we've collected. + ** + ** The VM register number pParse->regRowid holds the rowid of an + ** entry in the sqlite_master table tht was created for this vtab + ** by sqlite3StartTable(). */ - sqlite3WhereEnd(pWInfo); - }else{ - /* This is the processing for aggregate queries */ - NameContext sNC; /* Name context for processing aggregate information */ - int iAMem; /* First Mem address for storing current GROUP BY */ - int iBMem; /* First Mem address for previous GROUP BY */ - int iUseFlag; /* Mem address holding flag indicating that at least - ** one row of the input to the aggregator has been - ** processed */ - int iAbortFlag; /* Mem address which causes query abort if positive */ - int groupBySort; /* Rows come from source in GROUP BY order */ - int addrEnd; /* End of processing for this SELECT */ + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + sqlite3NestedParse(pParse, + "UPDATE %Q.%s " + "SET type='table', name=%Q, tbl_name=%Q, rootpage=0, sql=%Q " + "WHERE rowid=#%d", + db->aDb[iDb].zName, SCHEMA_TABLE(iDb), + pTab->zName, + pTab->zName, + zStmt, + pParse->regRowid + ); + sqlite3DbFree(db, zStmt); + v = sqlite3GetVdbe(pParse); + sqlite3ChangeCookie(pParse, iDb); - /* Remove any and all aliases between the result set and the - ** GROUP BY clause. - */ - if( pGroupBy ){ - int k; /* Loop counter */ - struct ExprList_item *pItem; /* For looping over expression in a list */ + sqlite3VdbeAddOp2(v, OP_Expire, 0, 0); + zWhere = sqlite3MPrintf(db, "name='%q' AND type='table'", pTab->zName); + sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere); + sqlite3VdbeAddOp4(v, OP_VCreate, iDb, 0, 0, + pTab->zName, sqlite3Strlen30(pTab->zName) + 1); + } - for(k=p->pEList->nExpr, pItem=p->pEList->a; k>0; k--, pItem++){ - pItem->iAlias = 0; - } - for(k=pGroupBy->nExpr, pItem=pGroupBy->a; k>0; k--, pItem++){ - pItem->iAlias = 0; - } - if( p->nSelectRow>(double)100 ) p->nSelectRow = (double)100; - }else{ - p->nSelectRow = (double)1; + /* If we are rereading the sqlite_master table create the in-memory + ** record of the table. The xConnect() method is not called until + ** the first time the virtual table is used in an SQL statement. This + ** allows a schema that contains virtual tables to be loaded before + ** the required virtual table implementations are registered. */ + else { + Table *pOld; + Schema *pSchema = pTab->pSchema; + const char *zName = pTab->zName; + assert( sqlite3SchemaMutexHeld(db, 0, pSchema) ); + pOld = sqlite3HashInsert(&pSchema->tblHash, zName, pTab); + if( pOld ){ + db->mallocFailed = 1; + assert( pTab==pOld ); /* Malloc must have failed inside HashInsert() */ + return; } + pParse->pNewTable = 0; + } +} - - /* Create a label to jump to when we want to abort the query */ - addrEnd = sqlite3VdbeMakeLabel(v); +/* +** The parser calls this routine when it sees the first token +** of an argument to the module name in a CREATE VIRTUAL TABLE statement. +*/ +SQLITE_PRIVATE void sqlite3VtabArgInit(Parse *pParse){ + addArgumentToVtab(pParse); + pParse->sArg.z = 0; + pParse->sArg.n = 0; +} - /* Convert TK_COLUMN nodes into TK_AGG_COLUMN and make entries in - ** sAggInfo for all TK_AGG_FUNCTION nodes in expressions of the - ** SELECT statement. - */ - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pParse; - sNC.pSrcList = pTabList; - sNC.pAggInfo = &sAggInfo; - sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr+1 : 0; - sAggInfo.pGroupBy = pGroupBy; - sqlite3ExprAnalyzeAggList(&sNC, pEList); - sqlite3ExprAnalyzeAggList(&sNC, pOrderBy); - if( pHaving ){ - sqlite3ExprAnalyzeAggregates(&sNC, pHaving); - } - sAggInfo.nAccumulator = sAggInfo.nColumn; - for(i=0; ix.pList); - } - if( db->mallocFailed ) goto select_end; +/* +** The parser calls this routine for each token after the first token +** in an argument to the module name in a CREATE VIRTUAL TABLE statement. +*/ +SQLITE_PRIVATE void sqlite3VtabArgExtend(Parse *pParse, Token *p){ + Token *pArg = &pParse->sArg; + if( pArg->z==0 ){ + pArg->z = p->z; + pArg->n = p->n; + }else{ + assert(pArg->z < p->z); + pArg->n = (int)(&p->z[p->n] - pArg->z); + } +} - /* Processing for aggregates with GROUP BY is very different and - ** much more complex than aggregates without a GROUP BY. - */ - if( pGroupBy ){ - KeyInfo *pKeyInfo; /* Keying information for the group by clause */ - int j1; /* A-vs-B comparision jump */ - int addrOutputRow; /* Start of subroutine that outputs a result row */ - int regOutputRow; /* Return address register for output subroutine */ - int addrSetAbort; /* Set the abort flag and return */ - int addrTopOfLoop; /* Top of the input loop */ - int addrSortingIdx; /* The OP_OpenEphemeral for the sorting index */ - int addrReset; /* Subroutine for resetting the accumulator */ - int regReset; /* Return address register for reset subroutine */ +/* +** Invoke a virtual table constructor (either xCreate or xConnect). The +** pointer to the function to invoke is passed as the fourth parameter +** to this procedure. +*/ +static int vtabCallConstructor( + sqlite3 *db, + Table *pTab, + Module *pMod, + int (*xConstruct)(sqlite3*,void*,int,const char*const*,sqlite3_vtab**,char**), + char **pzErr +){ + VtabCtx sCtx, *pPriorCtx; + VTable *pVTable; + int rc; + const char *const*azArg = (const char *const*)pTab->azModuleArg; + int nArg = pTab->nModuleArg; + char *zErr = 0; + char *zModuleName = sqlite3MPrintf(db, "%s", pTab->zName); + int iDb; - /* If there is a GROUP BY clause we might need a sorting index to - ** implement it. Allocate that sorting index now. If it turns out - ** that we do not need it after all, the OpenEphemeral instruction - ** will be converted into a Noop. - */ - sAggInfo.sortingIdx = pParse->nTab++; - pKeyInfo = keyInfoFromExprList(pParse, pGroupBy); - addrSortingIdx = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, - sAggInfo.sortingIdx, sAggInfo.nSortingColumn, - 0, (char*)pKeyInfo, P4_KEYINFO_HANDOFF); + if( !zModuleName ){ + return SQLITE_NOMEM; + } - /* Initialize memory locations used by GROUP BY aggregate processing - */ - iUseFlag = ++pParse->nMem; - iAbortFlag = ++pParse->nMem; - regOutputRow = ++pParse->nMem; - addrOutputRow = sqlite3VdbeMakeLabel(v); - regReset = ++pParse->nMem; - addrReset = sqlite3VdbeMakeLabel(v); - iAMem = pParse->nMem + 1; - pParse->nMem += pGroupBy->nExpr; - iBMem = pParse->nMem + 1; - pParse->nMem += pGroupBy->nExpr; - sqlite3VdbeAddOp2(v, OP_Integer, 0, iAbortFlag); - VdbeComment((v, "clear abort flag")); - sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag); - VdbeComment((v, "indicate accumulator empty")); + pVTable = sqlite3DbMallocZero(db, sizeof(VTable)); + if( !pVTable ){ + sqlite3DbFree(db, zModuleName); + return SQLITE_NOMEM; + } + pVTable->db = db; + pVTable->pMod = pMod; - /* Begin a loop that will extract all source rows in GROUP BY order. - ** This might involve two separate loops with an OP_Sort in between, or - ** it might be a single loop that uses an index to extract information - ** in the right order to begin with. - */ - sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, &pGroupBy, 0); - if( pWInfo==0 ) goto select_end; - if( pGroupBy==0 ){ - /* The optimizer is able to deliver rows in group by order so - ** we do not have to sort. The OP_OpenEphemeral table will be - ** cancelled later because we still need to use the pKeyInfo - */ - pGroupBy = p->pGroupBy; - groupBySort = 0; - }else{ - /* Rows are coming out in undetermined order. We have to push - ** each row into a sorting index, terminate the first loop, - ** then loop over the sorting index in order to get the output - ** in sorted order - */ - int regBase; - int regRecord; - int nCol; - int nGroupBy; + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + pTab->azModuleArg[1] = db->aDb[iDb].zName; - explainTempTable(pParse, - isDistinct && !(p->selFlags&SF_Distinct)?"DISTINCT":"GROUP BY"); + /* Invoke the virtual table constructor */ + assert( &db->pVtabCtx ); + assert( xConstruct ); + sCtx.pTab = pTab; + sCtx.pVTable = pVTable; + pPriorCtx = db->pVtabCtx; + db->pVtabCtx = &sCtx; + rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVTable->pVtab, &zErr); + db->pVtabCtx = pPriorCtx; + if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; - groupBySort = 1; - nGroupBy = pGroupBy->nExpr; - nCol = nGroupBy + 1; - j = nGroupBy+1; - for(i=0; i=j ){ - nCol++; - j++; - } - } - regBase = sqlite3GetTempRange(pParse, nCol); - sqlite3ExprCacheClear(pParse); - sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0); - sqlite3VdbeAddOp2(v, OP_Sequence, sAggInfo.sortingIdx,regBase+nGroupBy); - j = nGroupBy+1; - for(i=0; iiSorterColumn>=j ){ - int r1 = j + regBase; - int r2; + if( SQLITE_OK!=rc ){ + if( zErr==0 ){ + *pzErr = sqlite3MPrintf(db, "vtable constructor failed: %s", zModuleName); + }else { + *pzErr = sqlite3MPrintf(db, "%s", zErr); + sqlite3_free(zErr); + } + sqlite3DbFree(db, pVTable); + }else if( ALWAYS(pVTable->pVtab) ){ + /* Justification of ALWAYS(): A correct vtab constructor must allocate + ** the sqlite3_vtab object if successful. */ + memset(pVTable->pVtab, 0, sizeof(pVTable->pVtab[0])); + pVTable->pVtab->pModule = pMod->pModule; + pVTable->nRef = 1; + if( sCtx.pTab ){ + const char *zFormat = "vtable constructor did not declare schema: %s"; + *pzErr = sqlite3MPrintf(db, zFormat, pTab->zName); + sqlite3VtabUnlock(pVTable); + rc = SQLITE_ERROR; + }else{ + int iCol; + /* If everything went according to plan, link the new VTable structure + ** into the linked list headed by pTab->pVTable. Then loop through the + ** columns of the table to see if any of them contain the token "hidden". + ** If so, set the Column COLFLAG_HIDDEN flag and remove the token from + ** the type string. */ + pVTable->pNext = pTab->pVTable; + pTab->pVTable = pVTable; - r2 = sqlite3ExprCodeGetColumn(pParse, - pCol->pTab, pCol->iColumn, pCol->iTable, r1); - if( r1!=r2 ){ - sqlite3VdbeAddOp2(v, OP_SCopy, r2, r1); + for(iCol=0; iColnCol; iCol++){ + char *zType = pTab->aCol[iCol].zType; + int nType; + int i = 0; + if( !zType ) continue; + nType = sqlite3Strlen30(zType); + if( sqlite3StrNICmp("hidden", zType, 6)||(zType[6] && zType[6]!=' ') ){ + for(i=0; inExpr; j++){ - if( groupBySort ){ - sqlite3VdbeAddOp3(v, OP_Column, sAggInfo.sortingIdx, j, iBMem+j); - }else{ - sAggInfo.directMode = 1; - sqlite3ExprCode(pParse, pGroupBy->a[j].pExpr, iBMem+j); + if( i0 ){ + assert(zType[i-1]==' '); + zType[i-1] = '\0'; + } + pTab->aCol[iCol].colFlags |= COLFLAG_HIDDEN; } } - sqlite3VdbeAddOp4(v, OP_Compare, iAMem, iBMem, pGroupBy->nExpr, - (char*)pKeyInfo, P4_KEYINFO); - j1 = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp3(v, OP_Jump, j1+1, 0, j1+1); + } + } - /* Generate code that runs whenever the GROUP BY changes. - ** Changes in the GROUP BY are detected by the previous code - ** block. If there were no changes, this block is skipped. - ** - ** This code copies current group by terms in b0,b1,b2,... - ** over to a0,a1,a2. It then calls the output subroutine - ** and resets the aggregate accumulator registers in preparation - ** for the next GROUP BY batch. - */ - sqlite3ExprCodeMove(pParse, iBMem, iAMem, pGroupBy->nExpr); - sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); - VdbeComment((v, "output one row")); - sqlite3VdbeAddOp2(v, OP_IfPos, iAbortFlag, addrEnd); - VdbeComment((v, "check abort flag")); - sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); - VdbeComment((v, "reset accumulator")); + sqlite3DbFree(db, zModuleName); + return rc; +} - /* Update the aggregate accumulators based on the content of - ** the current row - */ - sqlite3VdbeJumpHere(v, j1); - updateAccumulator(pParse, &sAggInfo); - sqlite3VdbeAddOp2(v, OP_Integer, 1, iUseFlag); - VdbeComment((v, "indicate data in accumulator")); +/* +** This function is invoked by the parser to call the xConnect() method +** of the virtual table pTab. If an error occurs, an error code is returned +** and an error left in pParse. +** +** This call is a no-op if table pTab is not a virtual table. +*/ +SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse *pParse, Table *pTab){ + sqlite3 *db = pParse->db; + const char *zMod; + Module *pMod; + int rc; - /* End of the loop - */ - if( groupBySort ){ - sqlite3VdbeAddOp2(v, OP_Next, sAggInfo.sortingIdx, addrTopOfLoop); - }else{ - sqlite3WhereEnd(pWInfo); - sqlite3VdbeChangeToNoop(v, addrSortingIdx, 1); - } + assert( pTab ); + if( (pTab->tabFlags & TF_Virtual)==0 || sqlite3GetVTable(db, pTab) ){ + return SQLITE_OK; + } - /* Output the final row of result - */ - sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow); - VdbeComment((v, "output final row")); + /* Locate the required virtual table module */ + zMod = pTab->azModuleArg[0]; + pMod = (Module*)sqlite3HashFind(&db->aModule, zMod); - /* Jump over the subroutines - */ - sqlite3VdbeAddOp2(v, OP_Goto, 0, addrEnd); + if( !pMod ){ + const char *zModule = pTab->azModuleArg[0]; + sqlite3ErrorMsg(pParse, "no such module: %s", zModule); + rc = SQLITE_ERROR; + }else{ + char *zErr = 0; + rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xConnect, &zErr); + if( rc!=SQLITE_OK ){ + sqlite3ErrorMsg(pParse, "%s", zErr); + } + sqlite3DbFree(db, zErr); + } - /* Generate a subroutine that outputs a single row of the result - ** set. This subroutine first looks at the iUseFlag. If iUseFlag - ** is less than or equal to zero, the subroutine is a no-op. If - ** the processing calls for the query to abort, this subroutine - ** increments the iAbortFlag memory location before returning in - ** order to signal the caller to abort. - */ - addrSetAbort = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp2(v, OP_Integer, 1, iAbortFlag); - VdbeComment((v, "set abort flag")); - sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); - sqlite3VdbeResolveLabel(v, addrOutputRow); - addrOutputRow = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp2(v, OP_IfPos, iUseFlag, addrOutputRow+2); - VdbeComment((v, "Groupby result generator entry point")); - sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); - finalizeAggFunctions(pParse, &sAggInfo); - sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, 0, 0, pOrderBy, - distinct, pDest, - addrOutputRow+1, addrSetAbort); - sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); - VdbeComment((v, "end groupby result generator")); + return rc; +} +/* +** Grow the db->aVTrans[] array so that there is room for at least one +** more v-table. Return SQLITE_NOMEM if a malloc fails, or SQLITE_OK otherwise. +*/ +static int growVTrans(sqlite3 *db){ + const int ARRAY_INCR = 5; - /* Generate a subroutine that will reset the group-by accumulator - */ - sqlite3VdbeResolveLabel(v, addrReset); - resetAccumulator(pParse, &sAggInfo); - sqlite3VdbeAddOp1(v, OP_Return, regReset); - - } /* endif pGroupBy. Begin aggregate queries without GROUP BY: */ - else { - ExprList *pDel = 0; -#ifndef SQLITE_OMIT_BTREECOUNT - Table *pTab; - if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){ - /* If isSimpleCount() returns a pointer to a Table structure, then - ** the SQL statement is of the form: - ** - ** SELECT count(*) FROM - ** - ** where the Table structure returned represents table . - ** - ** This statement is so common that it is optimized specially. The - ** OP_Count instruction is executed either on the intkey table that - ** contains the data for table or on one of its indexes. It - ** is better to execute the op on an index, as indexes are almost - ** always spread across less pages than their corresponding tables. - */ - const int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - const int iCsr = pParse->nTab++; /* Cursor to scan b-tree */ - Index *pIdx; /* Iterator variable */ - KeyInfo *pKeyInfo = 0; /* Keyinfo for scanned index */ - Index *pBest = 0; /* Best index found so far */ - int iRoot = pTab->tnum; /* Root page of scanned b-tree */ + /* Grow the sqlite3.aVTrans array if required */ + if( (db->nVTrans%ARRAY_INCR)==0 ){ + VTable **aVTrans; + int nBytes = sizeof(sqlite3_vtab *) * (db->nVTrans + ARRAY_INCR); + aVTrans = sqlite3DbRealloc(db, (void *)db->aVTrans, nBytes); + if( !aVTrans ){ + return SQLITE_NOMEM; + } + memset(&aVTrans[db->nVTrans], 0, sizeof(sqlite3_vtab *)*ARRAY_INCR); + db->aVTrans = aVTrans; + } - sqlite3CodeVerifySchema(pParse, iDb); - sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + return SQLITE_OK; +} - /* Search for the index that has the least amount of columns. If - ** there is such an index, and it has less columns than the table - ** does, then we can assume that it consumes less space on disk and - ** will therefore be cheaper to scan to determine the query result. - ** In this case set iRoot to the root page number of the index b-tree - ** and pKeyInfo to the KeyInfo structure required to navigate the - ** index. - ** - ** (2011-04-15) Do not do a full scan of an unordered index. - ** - ** In practice the KeyInfo structure will not be used. It is only - ** passed to keep OP_OpenRead happy. - */ - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->bUnordered==0 && (!pBest || pIdx->nColumnnColumn) ){ - pBest = pIdx; - } - } - if( pBest && pBest->nColumnnCol ){ - iRoot = pBest->tnum; - pKeyInfo = sqlite3IndexKeyinfo(pParse, pBest); - } +/* +** Add the virtual table pVTab to the array sqlite3.aVTrans[]. Space should +** have already been reserved using growVTrans(). +*/ +static void addToVTrans(sqlite3 *db, VTable *pVTab){ + /* Add pVtab to the end of sqlite3.aVTrans */ + db->aVTrans[db->nVTrans++] = pVTab; + sqlite3VtabLock(pVTab); +} - /* Open a read-only cursor, execute the OP_Count, close the cursor. */ - sqlite3VdbeAddOp3(v, OP_OpenRead, iCsr, iRoot, iDb); - if( pKeyInfo ){ - sqlite3VdbeChangeP4(v, -1, (char *)pKeyInfo, P4_KEYINFO_HANDOFF); - } - sqlite3VdbeAddOp2(v, OP_Count, iCsr, sAggInfo.aFunc[0].iMem); - sqlite3VdbeAddOp1(v, OP_Close, iCsr); - explainSimpleCount(pParse, pTab, pBest); - }else -#endif /* SQLITE_OMIT_BTREECOUNT */ - { - /* Check if the query is of one of the following forms: - ** - ** SELECT min(x) FROM ... - ** SELECT max(x) FROM ... - ** - ** If it is, then ask the code in where.c to attempt to sort results - ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause. - ** If where.c is able to produce results sorted in this order, then - ** add vdbe code to break out of the processing loop after the - ** first iteration (since the first iteration of the loop is - ** guaranteed to operate on the row with the minimum or maximum - ** value of x, the only row required). - ** - ** A special flag must be passed to sqlite3WhereBegin() to slightly - ** modify behaviour as follows: - ** - ** + If the query is a "SELECT min(x)", then the loop coded by - ** where.c should not iterate over any values with a NULL value - ** for x. - ** - ** + The optimizer code in where.c (the thing that decides which - ** index or indices to use) should place a different priority on - ** satisfying the 'ORDER BY' clause than it does in other cases. - ** Refer to code and comments in where.c for details. - */ - ExprList *pMinMax = 0; - u8 flag = minMaxQuery(p); - if( flag ){ - assert( !ExprHasProperty(p->pEList->a[0].pExpr, EP_xIsSelect) ); - pMinMax = sqlite3ExprListDup(db, p->pEList->a[0].pExpr->x.pList,0); - pDel = pMinMax; - if( pMinMax && !db->mallocFailed ){ - pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0; - pMinMax->a[0].pExpr->op = TK_COLUMN; - } - } - - /* This case runs if the aggregate has no GROUP BY clause. The - ** processing is much simpler since there is only a single row - ** of output. - */ - resetAccumulator(pParse, &sAggInfo); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, &pMinMax, flag); - if( pWInfo==0 ){ - sqlite3ExprListDelete(db, pDel); - goto select_end; - } - updateAccumulator(pParse, &sAggInfo); - if( !pMinMax && flag ){ - sqlite3VdbeAddOp2(v, OP_Goto, 0, pWInfo->iBreak); - VdbeComment((v, "%s() by index", - (flag==WHERE_ORDERBY_MIN?"min":"max"))); - } - sqlite3WhereEnd(pWInfo); - finalizeAggFunctions(pParse, &sAggInfo); - } +/* +** This function is invoked by the vdbe to call the xCreate method +** of the virtual table named zTab in database iDb. +** +** If an error occurs, *pzErr is set to point an an English language +** description of the error and an SQLITE_XXX error code is returned. +** In this case the caller must call sqlite3DbFree(db, ) on *pzErr. +*/ +SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3 *db, int iDb, const char *zTab, char **pzErr){ + int rc = SQLITE_OK; + Table *pTab; + Module *pMod; + const char *zMod; - pOrderBy = 0; - sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, 0, 0, 0, -1, - pDest, addrEnd, addrEnd); - sqlite3ExprListDelete(db, pDel); + pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName); + assert( pTab && (pTab->tabFlags & TF_Virtual)!=0 && !pTab->pVTable ); + + /* Locate the required virtual table module */ + zMod = pTab->azModuleArg[0]; + pMod = (Module*)sqlite3HashFind(&db->aModule, zMod); + + /* If the module has been registered and includes a Create method, + ** invoke it now. If the module has not been registered, return an + ** error. Otherwise, do nothing. + */ + if( !pMod ){ + *pzErr = sqlite3MPrintf(db, "no such module: %s", zMod); + rc = SQLITE_ERROR; + }else{ + rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xCreate, pzErr); + } + + /* Justification of ALWAYS(): The xConstructor method is required to + ** create a valid sqlite3_vtab if it returns SQLITE_OK. */ + if( rc==SQLITE_OK && ALWAYS(sqlite3GetVTable(db, pTab)) ){ + rc = growVTrans(db); + if( rc==SQLITE_OK ){ + addToVTrans(db, sqlite3GetVTable(db, pTab)); } - sqlite3VdbeResolveLabel(v, addrEnd); - - } /* endif aggregate query */ + } - if( distinct>=0 ){ - explainTempTable(pParse, "DISTINCT"); + return rc; +} + +/* +** This function is used to set the schema of a virtual table. It is only +** valid to call this function from within the xCreate() or xConnect() of a +** virtual table module. +*/ +SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){ + Parse *pParse; + + int rc = SQLITE_OK; + Table *pTab; + char *zErr = 0; + + sqlite3_mutex_enter(db->mutex); + if( !db->pVtabCtx || !(pTab = db->pVtabCtx->pTab) ){ + sqlite3Error(db, SQLITE_MISUSE); + sqlite3_mutex_leave(db->mutex); + return SQLITE_MISUSE_BKPT; } + assert( (pTab->tabFlags & TF_Virtual)!=0 ); - /* If there is an ORDER BY clause, then we need to sort the results - ** and send them to the callback one by one. - */ - if( pOrderBy ){ - explainTempTable(pParse, "ORDER BY"); - generateSortTail(pParse, p, v, pEList->nExpr, pDest); + pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); + if( pParse==0 ){ + rc = SQLITE_NOMEM; + }else{ + pParse->declareVtab = 1; + pParse->db = db; + pParse->nQueryLoop = 1; + + if( SQLITE_OK==sqlite3RunParser(pParse, zCreateTable, &zErr) + && pParse->pNewTable + && !db->mallocFailed + && !pParse->pNewTable->pSelect + && (pParse->pNewTable->tabFlags & TF_Virtual)==0 + ){ + if( !pTab->aCol ){ + pTab->aCol = pParse->pNewTable->aCol; + pTab->nCol = pParse->pNewTable->nCol; + pParse->pNewTable->nCol = 0; + pParse->pNewTable->aCol = 0; + } + db->pVtabCtx->pTab = 0; + }else{ + sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); + sqlite3DbFree(db, zErr); + rc = SQLITE_ERROR; + } + pParse->declareVtab = 0; + + if( pParse->pVdbe ){ + sqlite3VdbeFinalize(pParse->pVdbe); + } + sqlite3DeleteTable(db, pParse->pNewTable); + sqlite3ParserReset(pParse); + sqlite3StackFree(db, pParse); } - /* Jump here to skip this query - */ - sqlite3VdbeResolveLabel(v, iEnd); + assert( (rc&0xff)==rc ); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} - /* The SELECT was successfully coded. Set the return code to 0 - ** to indicate no errors. - */ - rc = 0; +/* +** This function is invoked by the vdbe to call the xDestroy method +** of the virtual table named zTab in database iDb. This occurs +** when a DROP TABLE is mentioned. +** +** This call is a no-op if zTab is not a virtual table. +*/ +SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3 *db, int iDb, const char *zTab){ + int rc = SQLITE_OK; + Table *pTab; - /* Control jumps to here if an error is encountered above, or upon - ** successful coding of the SELECT. - */ -select_end: - explainSetInteger(pParse->iSelectId, iRestoreSelectId); + pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName); + if( ALWAYS(pTab!=0 && pTab->pVTable!=0) ){ + VTable *p = vtabDisconnectAll(db, pTab); - /* Identify column names if results of the SELECT are to be output. - */ - if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){ - generateColumnNames(pParse, pTabList, pEList); + assert( rc==SQLITE_OK ); + rc = p->pMod->pModule->xDestroy(p->pVtab); + + /* Remove the sqlite3_vtab* from the aVTrans[] array, if applicable */ + if( rc==SQLITE_OK ){ + assert( pTab->pVTable==p && p->pNext==0 ); + p->pVtab = 0; + pTab->pVTable = 0; + sqlite3VtabUnlock(p); + } } - sqlite3DbFree(db, sAggInfo.aCol); - sqlite3DbFree(db, sAggInfo.aFunc); return rc; } -#if defined(SQLITE_DEBUG) /* -******************************************************************************* -** The following code is used for testing and debugging only. The code -** that follows does not appear in normal builds. -** -** These routines are used to print out the content of all or part of a -** parse structures such as Select or Expr. Such printouts are useful -** for helping to understand what is happening inside the code generator -** during the execution of complex SELECT statements. +** This function invokes either the xRollback or xCommit method +** of each of the virtual tables in the sqlite3.aVTrans array. The method +** called is identified by the second argument, "offset", which is +** the offset of the method to call in the sqlite3_module structure. ** -** These routine are not called anywhere from within the normal -** code base. Then are intended to be called from within the debugger -** or from temporary "printf" statements inserted for debugging. +** The array is cleared after invoking the callbacks. */ -SQLITE_PRIVATE void sqlite3PrintExpr(Expr *p){ - if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){ - sqlite3DebugPrintf("(%s", p->u.zToken); - }else{ - sqlite3DebugPrintf("(%d", p->op); - } - if( p->pLeft ){ - sqlite3DebugPrintf(" "); - sqlite3PrintExpr(p->pLeft); - } - if( p->pRight ){ - sqlite3DebugPrintf(" "); - sqlite3PrintExpr(p->pRight); +static void callFinaliser(sqlite3 *db, int offset){ + int i; + if( db->aVTrans ){ + for(i=0; inVTrans; i++){ + VTable *pVTab = db->aVTrans[i]; + sqlite3_vtab *p = pVTab->pVtab; + if( p ){ + int (*x)(sqlite3_vtab *); + x = *(int (**)(sqlite3_vtab *))((char *)p->pModule + offset); + if( x ) x(p); + } + pVTab->iSavepoint = 0; + sqlite3VtabUnlock(pVTab); + } + sqlite3DbFree(db, db->aVTrans); + db->nVTrans = 0; + db->aVTrans = 0; } - sqlite3DebugPrintf(")"); } -SQLITE_PRIVATE void sqlite3PrintExprList(ExprList *pList){ + +/* +** Invoke the xSync method of all virtual tables in the sqlite3.aVTrans +** array. Return the error code for the first error that occurs, or +** SQLITE_OK if all xSync operations are successful. +** +** If an error message is available, leave it in p->zErrMsg. +*/ +SQLITE_PRIVATE int sqlite3VtabSync(sqlite3 *db, Vdbe *p){ int i; - for(i=0; inExpr; i++){ - sqlite3PrintExpr(pList->a[i].pExpr); - if( inExpr-1 ){ - sqlite3DebugPrintf(", "); + int rc = SQLITE_OK; + VTable **aVTrans = db->aVTrans; + + db->aVTrans = 0; + for(i=0; rc==SQLITE_OK && inVTrans; i++){ + int (*x)(sqlite3_vtab *); + sqlite3_vtab *pVtab = aVTrans[i]->pVtab; + if( pVtab && (x = pVtab->pModule->xSync)!=0 ){ + rc = x(pVtab); + sqlite3VtabImportErrmsg(p, pVtab); } } + db->aVTrans = aVTrans; + return rc; +} + +/* +** Invoke the xRollback method of all virtual tables in the +** sqlite3.aVTrans array. Then clear the array itself. +*/ +SQLITE_PRIVATE int sqlite3VtabRollback(sqlite3 *db){ + callFinaliser(db, offsetof(sqlite3_module,xRollback)); + return SQLITE_OK; +} + +/* +** Invoke the xCommit method of all virtual tables in the +** sqlite3.aVTrans array. Then clear the array itself. +*/ +SQLITE_PRIVATE int sqlite3VtabCommit(sqlite3 *db){ + callFinaliser(db, offsetof(sqlite3_module,xCommit)); + return SQLITE_OK; } -SQLITE_PRIVATE void sqlite3PrintSelect(Select *p, int indent){ - sqlite3DebugPrintf("%*sSELECT(%p) ", indent, "", p); - sqlite3PrintExprList(p->pEList); - sqlite3DebugPrintf("\n"); - if( p->pSrc ){ - char *zPrefix; + +/* +** If the virtual table pVtab supports the transaction interface +** (xBegin/xRollback/xCommit and optionally xSync) and a transaction is +** not currently open, invoke the xBegin method now. +** +** If the xBegin call is successful, place the sqlite3_vtab pointer +** in the sqlite3.aVTrans array. +*/ +SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *db, VTable *pVTab){ + int rc = SQLITE_OK; + const sqlite3_module *pModule; + + /* Special case: If db->aVTrans is NULL and db->nVTrans is greater + ** than zero, then this function is being called from within a + ** virtual module xSync() callback. It is illegal to write to + ** virtual module tables in this case, so return SQLITE_LOCKED. + */ + if( sqlite3VtabInSync(db) ){ + return SQLITE_LOCKED; + } + if( !pVTab ){ + return SQLITE_OK; + } + pModule = pVTab->pVtab->pModule; + + if( pModule->xBegin ){ int i; - zPrefix = "FROM"; - for(i=0; ipSrc->nSrc; i++){ - struct SrcList_item *pItem = &p->pSrc->a[i]; - sqlite3DebugPrintf("%*s ", indent+6, zPrefix); - zPrefix = ""; - if( pItem->pSelect ){ - sqlite3DebugPrintf("(\n"); - sqlite3PrintSelect(pItem->pSelect, indent+10); - sqlite3DebugPrintf("%*s)", indent+8, ""); - }else if( pItem->zName ){ - sqlite3DebugPrintf("%s", pItem->zName); - } - if( pItem->pTab ){ - sqlite3DebugPrintf("(table: %s)", pItem->pTab->zName); - } - if( pItem->zAlias ){ - sqlite3DebugPrintf(" AS %s", pItem->zAlias); + + /* If pVtab is already in the aVTrans array, return early */ + for(i=0; inVTrans; i++){ + if( db->aVTrans[i]==pVTab ){ + return SQLITE_OK; } - if( ipSrc->nSrc-1 ){ - sqlite3DebugPrintf(","); + } + + /* Invoke the xBegin method. If successful, add the vtab to the + ** sqlite3.aVTrans[] array. */ + rc = growVTrans(db); + if( rc==SQLITE_OK ){ + rc = pModule->xBegin(pVTab->pVtab); + if( rc==SQLITE_OK ){ + addToVTrans(db, pVTab); } - sqlite3DebugPrintf("\n"); } } - if( p->pWhere ){ - sqlite3DebugPrintf("%*s WHERE ", indent, ""); - sqlite3PrintExpr(p->pWhere); - sqlite3DebugPrintf("\n"); - } - if( p->pGroupBy ){ - sqlite3DebugPrintf("%*s GROUP BY ", indent, ""); - sqlite3PrintExprList(p->pGroupBy); - sqlite3DebugPrintf("\n"); - } - if( p->pHaving ){ - sqlite3DebugPrintf("%*s HAVING ", indent, ""); - sqlite3PrintExpr(p->pHaving); - sqlite3DebugPrintf("\n"); - } - if( p->pOrderBy ){ - sqlite3DebugPrintf("%*s ORDER BY ", indent, ""); - sqlite3PrintExprList(p->pOrderBy); - sqlite3DebugPrintf("\n"); - } + return rc; } -/* End of the structure debug printing code -*****************************************************************************/ -#endif /* defined(SQLITE_TEST) || defined(SQLITE_DEBUG) */ -/************** End of select.c **********************************************/ -/************** Begin file table.c *******************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Invoke either the xSavepoint, xRollbackTo or xRelease method of all +** virtual tables that currently have an open transaction. Pass iSavepoint +** as the second argument to the virtual table method invoked. ** -************************************************************************* -** This file contains the sqlite3_get_table() and sqlite3_free_table() -** interface routines. These are just wrappers around the main -** interface routine of sqlite3_exec(). +** If op is SAVEPOINT_BEGIN, the xSavepoint method is invoked. If it is +** SAVEPOINT_ROLLBACK, the xRollbackTo method. Otherwise, if op is +** SAVEPOINT_RELEASE, then the xRelease method of each virtual table with +** an open transaction is invoked. ** -** These routines are in a separate files so that they will not be linked -** if they are not used. +** If any virtual table method returns an error code other than SQLITE_OK, +** processing is abandoned and the error returned to the caller of this +** function immediately. If all calls to virtual table methods are successful, +** SQLITE_OK is returned. */ +SQLITE_PRIVATE int sqlite3VtabSavepoint(sqlite3 *db, int op, int iSavepoint){ + int rc = SQLITE_OK; -#ifndef SQLITE_OMIT_GET_TABLE + assert( op==SAVEPOINT_RELEASE||op==SAVEPOINT_ROLLBACK||op==SAVEPOINT_BEGIN ); + assert( iSavepoint>=0 ); + if( db->aVTrans ){ + int i; + for(i=0; rc==SQLITE_OK && inVTrans; i++){ + VTable *pVTab = db->aVTrans[i]; + const sqlite3_module *pMod = pVTab->pMod->pModule; + if( pVTab->pVtab && pMod->iVersion>=2 ){ + int (*xMethod)(sqlite3_vtab *, int); + switch( op ){ + case SAVEPOINT_BEGIN: + xMethod = pMod->xSavepoint; + pVTab->iSavepoint = iSavepoint+1; + break; + case SAVEPOINT_ROLLBACK: + xMethod = pMod->xRollbackTo; + break; + default: + xMethod = pMod->xRelease; + break; + } + if( xMethod && pVTab->iSavepoint>iSavepoint ){ + rc = xMethod(pVTab->pVtab, iSavepoint); + } + } + } + } + return rc; +} /* -** This structure is used to pass data from sqlite3_get_table() through -** to the callback function is uses to build the result. +** The first parameter (pDef) is a function implementation. The +** second parameter (pExpr) is the first argument to this function. +** If pExpr is a column in a virtual table, then let the virtual +** table implementation have an opportunity to overload the function. +** +** This routine is used to allow virtual table implementations to +** overload MATCH, LIKE, GLOB, and REGEXP operators. +** +** Return either the pDef argument (indicating no change) or a +** new FuncDef structure that is marked as ephemeral using the +** SQLITE_FUNC_EPHEM flag. */ -typedef struct TabResult { - char **azResult; /* Accumulated output */ - char *zErrMsg; /* Error message text, if an error occurs */ - int nAlloc; /* Slots allocated for azResult[] */ - int nRow; /* Number of rows in the result */ - int nColumn; /* Number of columns in the result */ - int nData; /* Slots used in azResult[]. (nRow+1)*nColumn */ - int rc; /* Return code from sqlite3_exec() */ -} TabResult; +SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction( + sqlite3 *db, /* Database connection for reporting malloc problems */ + FuncDef *pDef, /* Function to possibly overload */ + int nArg, /* Number of arguments to the function */ + Expr *pExpr /* First argument to the function */ +){ + Table *pTab; + sqlite3_vtab *pVtab; + sqlite3_module *pMod; + void (*xFunc)(sqlite3_context*,int,sqlite3_value**) = 0; + void *pArg = 0; + FuncDef *pNew; + int rc = 0; + char *zLowerName; + unsigned char *z; -/* -** This routine is called once for each row in the result table. Its job -** is to fill in the TabResult structure appropriately, allocating new -** memory as necessary. -*/ -static int sqlite3_get_table_cb(void *pArg, int nCol, char **argv, char **colv){ - TabResult *p = (TabResult*)pArg; /* Result accumulator */ - int need; /* Slots needed in p->azResult[] */ - int i; /* Loop counter */ - char *z; /* A single column of result */ - /* Make sure there is enough space in p->azResult to hold everything - ** we need to remember from this invocation of the callback. + /* Check to see the left operand is a column in a virtual table */ + if( NEVER(pExpr==0) ) return pDef; + if( pExpr->op!=TK_COLUMN ) return pDef; + pTab = pExpr->pTab; + if( NEVER(pTab==0) ) return pDef; + if( (pTab->tabFlags & TF_Virtual)==0 ) return pDef; + pVtab = sqlite3GetVTable(db, pTab)->pVtab; + assert( pVtab!=0 ); + assert( pVtab->pModule!=0 ); + pMod = (sqlite3_module *)pVtab->pModule; + if( pMod->xFindFunction==0 ) return pDef; + + /* Call the xFindFunction method on the virtual table implementation + ** to see if the implementation wants to overload this function */ - if( p->nRow==0 && argv!=0 ){ - need = nCol*2; - }else{ - need = nCol; + zLowerName = sqlite3DbStrDup(db, pDef->zName); + if( zLowerName ){ + for(z=(unsigned char*)zLowerName; *z; z++){ + *z = sqlite3UpperToLower[*z]; + } + rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xFunc, &pArg); + sqlite3DbFree(db, zLowerName); } - if( p->nData + need > p->nAlloc ){ - char **azNew; - p->nAlloc = p->nAlloc*2 + need; - azNew = sqlite3_realloc( p->azResult, sizeof(char*)*p->nAlloc ); - if( azNew==0 ) goto malloc_failed; - p->azResult = azNew; + if( rc==0 ){ + return pDef; } - /* If this is the first row, then generate an extra row containing - ** the names of all columns. - */ - if( p->nRow==0 ){ - p->nColumn = nCol; - for(i=0; iazResult[p->nData++] = z; - } - }else if( p->nColumn!=nCol ){ - sqlite3_free(p->zErrMsg); - p->zErrMsg = sqlite3_mprintf( - "sqlite3_get_table() called with two or more incompatible queries" - ); - p->rc = SQLITE_ERROR; - return 1; + /* Create a new ephemeral function definition for the overloaded + ** function */ + pNew = sqlite3DbMallocZero(db, sizeof(*pNew) + + sqlite3Strlen30(pDef->zName) + 1); + if( pNew==0 ){ + return pDef; } + *pNew = *pDef; + pNew->zName = (char *)&pNew[1]; + memcpy(pNew->zName, pDef->zName, sqlite3Strlen30(pDef->zName)+1); + pNew->xFunc = xFunc; + pNew->pUserData = pArg; + pNew->funcFlags |= SQLITE_FUNC_EPHEM; + return pNew; +} - /* Copy over the row data - */ - if( argv!=0 ){ - for(i=0; iazResult[p->nData++] = z; - } - p->nRow++; - } - return 0; +/* +** Make sure virtual table pTab is contained in the pParse->apVirtualLock[] +** array so that an OP_VBegin will get generated for it. Add pTab to the +** array if it is missing. If pTab is already in the array, this routine +** is a no-op. +*/ +SQLITE_PRIVATE void sqlite3VtabMakeWritable(Parse *pParse, Table *pTab){ + Parse *pToplevel = sqlite3ParseToplevel(pParse); + int i, n; + Table **apVtabLock; -malloc_failed: - p->rc = SQLITE_NOMEM; - return 1; + assert( IsVirtual(pTab) ); + for(i=0; inVtabLock; i++){ + if( pTab==pToplevel->apVtabLock[i] ) return; + } + n = (pToplevel->nVtabLock+1)*sizeof(pToplevel->apVtabLock[0]); + apVtabLock = sqlite3_realloc(pToplevel->apVtabLock, n); + if( apVtabLock ){ + pToplevel->apVtabLock = apVtabLock; + pToplevel->apVtabLock[pToplevel->nVtabLock++] = pTab; + }else{ + pToplevel->db->mallocFailed = 1; + } } /* -** Query the database. But instead of invoking a callback for each row, -** malloc() for space to hold the result and return the entire results -** at the conclusion of the call. +** Return the ON CONFLICT resolution mode in effect for the virtual +** table update operation currently in progress. ** -** The result that is written to ***pazResult is held in memory obtained -** from malloc(). But the caller cannot free this memory directly. -** Instead, the entire table should be passed to sqlite3_free_table() when -** the calling procedure is finished using it. +** The results of this routine are undefined unless it is called from +** within an xUpdate method. */ -SQLITE_API int sqlite3_get_table( - sqlite3 *db, /* The database on which the SQL executes */ - const char *zSql, /* The SQL to be executed */ - char ***pazResult, /* Write the result table here */ - int *pnRow, /* Write the number of rows in the result here */ - int *pnColumn, /* Write the number of columns of result here */ - char **pzErrMsg /* Write error messages here */ -){ - int rc; - TabResult res; +SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *db){ + static const unsigned char aMap[] = { + SQLITE_ROLLBACK, SQLITE_ABORT, SQLITE_FAIL, SQLITE_IGNORE, SQLITE_REPLACE + }; + assert( OE_Rollback==1 && OE_Abort==2 && OE_Fail==3 ); + assert( OE_Ignore==4 && OE_Replace==5 ); + assert( db->vtabOnConflict>=1 && db->vtabOnConflict<=5 ); + return (int)aMap[db->vtabOnConflict-1]; +} - *pazResult = 0; - if( pnColumn ) *pnColumn = 0; - if( pnRow ) *pnRow = 0; - if( pzErrMsg ) *pzErrMsg = 0; - res.zErrMsg = 0; - res.nRow = 0; - res.nColumn = 0; - res.nData = 1; - res.nAlloc = 20; - res.rc = SQLITE_OK; - res.azResult = sqlite3_malloc(sizeof(char*)*res.nAlloc ); - if( res.azResult==0 ){ - db->errCode = SQLITE_NOMEM; - return SQLITE_NOMEM; - } - res.azResult[0] = 0; - rc = sqlite3_exec(db, zSql, sqlite3_get_table_cb, &res, pzErrMsg); - assert( sizeof(res.azResult[0])>= sizeof(res.nData) ); - res.azResult[0] = SQLITE_INT_TO_PTR(res.nData); - if( (rc&0xff)==SQLITE_ABORT ){ - sqlite3_free_table(&res.azResult[1]); - if( res.zErrMsg ){ - if( pzErrMsg ){ - sqlite3_free(*pzErrMsg); - *pzErrMsg = sqlite3_mprintf("%s",res.zErrMsg); +/* +** Call from within the xCreate() or xConnect() methods to provide +** the SQLite core with additional information about the behavior +** of the virtual table being implemented. +*/ +SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){ + va_list ap; + int rc = SQLITE_OK; + + sqlite3_mutex_enter(db->mutex); + + va_start(ap, op); + switch( op ){ + case SQLITE_VTAB_CONSTRAINT_SUPPORT: { + VtabCtx *p = db->pVtabCtx; + if( !p ){ + rc = SQLITE_MISUSE_BKPT; + }else{ + assert( p->pTab==0 || (p->pTab->tabFlags & TF_Virtual)!=0 ); + p->pVTable->bConstraint = (u8)va_arg(ap, int); } - sqlite3_free(res.zErrMsg); - } - db->errCode = res.rc; /* Assume 32-bit assignment is atomic */ - return res.rc; - } - sqlite3_free(res.zErrMsg); - if( rc!=SQLITE_OK ){ - sqlite3_free_table(&res.azResult[1]); - return rc; - } - if( res.nAlloc>res.nData ){ - char **azNew; - azNew = sqlite3_realloc( res.azResult, sizeof(char*)*res.nData ); - if( azNew==0 ){ - sqlite3_free_table(&res.azResult[1]); - db->errCode = SQLITE_NOMEM; - return SQLITE_NOMEM; + break; } - res.azResult = azNew; + default: + rc = SQLITE_MISUSE_BKPT; + break; } - *pazResult = &res.azResult[1]; - if( pnColumn ) *pnColumn = res.nColumn; - if( pnRow ) *pnRow = res.nRow; + va_end(ap); + + if( rc!=SQLITE_OK ) sqlite3Error(db, rc); + sqlite3_mutex_leave(db->mutex); return rc; } +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +/************** End of vtab.c ************************************************/ +/************** Begin file where.c *******************************************/ /* -** This routine frees the space the sqlite3_get_table() malloced. +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This module contains C code that generates VDBE code used to process +** the WHERE clause of SQL statements. This module is responsible for +** generating the code that loops through a table looking for applicable +** rows. Indices are selected and used to speed the search when doing +** so is applicable. Because this module is responsible for selecting +** indices, you might also think of this module as the "query optimizer". +*/ +/************** Include whereInt.h in the middle of where.c ******************/ +/************** Begin file whereInt.h ****************************************/ +/* +** 2013-11-12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains structure and macro definitions for the query +** planner logic in "where.c". These definitions are broken out into +** a separate source file for easier editing. */ -SQLITE_API void sqlite3_free_table( - char **azResult /* Result returned from from sqlite3_get_table() */ -){ - if( azResult ){ - int i, n; - azResult--; - assert( azResult!=0 ); - n = SQLITE_PTR_TO_INT(azResult[0]); - for(i=1; iwsFlags */ + struct { + int nIn; /* Number of entries in aInLoop[] */ + struct InLoop { + int iCur; /* The VDBE cursor used by this IN operator */ + int addrInTop; /* Top of the IN loop */ + u8 eEndLoopOp; /* IN Loop terminator. OP_Next or OP_Prev */ + } *aInLoop; /* Information about each nested IN operator */ + } in; /* Used when pWLoop->wsFlags&WHERE_IN_ABLE */ + Index *pCovidx; /* Possible covering index for WHERE_MULTI_OR */ + } u; + struct WhereLoop *pWLoop; /* The selected WhereLoop object */ + Bitmask notReady; /* FROM entries not usable at this level */ +}; -/************** End of table.c ***********************************************/ -/************** Begin file trigger.c *****************************************/ /* +** Each instance of this object represents an algorithm for evaluating one +** term of a join. Every term of the FROM clause will have at least +** one corresponding WhereLoop object (unless INDEXED BY constraints +** prevent a query solution - which is an error) and many terms of the +** FROM clause will have multiple WhereLoop objects, each describing a +** potential way of implementing that FROM-clause term, together with +** dependencies and cost estimates for using the chosen algorithm. ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains the implementation for TRIGGERs +** Query planning consists of building up a collection of these WhereLoop +** objects, then computing a particular sequence of WhereLoop objects, with +** one WhereLoop object per FROM clause term, that satisfy all dependencies +** and that minimize the overall cost. */ +struct WhereLoop { + Bitmask prereq; /* Bitmask of other loops that must run first */ + Bitmask maskSelf; /* Bitmask identifying table iTab */ +#ifdef SQLITE_DEBUG + char cId; /* Symbolic ID of this loop for debugging use */ +#endif + u8 iTab; /* Position in FROM clause of table for this loop */ + u8 iSortIdx; /* Sorting index number. 0==None */ + LogEst rSetup; /* One-time setup cost (ex: create transient index) */ + LogEst rRun; /* Cost of running each loop */ + LogEst nOut; /* Estimated number of output rows */ + union { + struct { /* Information for internal btree tables */ + u16 nEq; /* Number of equality constraints */ + u16 nSkip; /* Number of initial index columns to skip */ + Index *pIndex; /* Index used, or NULL */ + } btree; + struct { /* Information for virtual tables */ + int idxNum; /* Index number */ + u8 needFree; /* True if sqlite3_free(idxStr) is needed */ + i8 isOrdered; /* True if satisfies ORDER BY */ + u16 omitMask; /* Terms that may be omitted */ + char *idxStr; /* Index identifier string */ + } vtab; + } u; + u32 wsFlags; /* WHERE_* flags describing the plan */ + u16 nLTerm; /* Number of entries in aLTerm[] */ + /**** whereLoopXfer() copies fields above ***********************/ +# define WHERE_LOOP_XFER_SZ offsetof(WhereLoop,nLSlot) + u16 nLSlot; /* Number of slots allocated for aLTerm[] */ + WhereTerm **aLTerm; /* WhereTerms used */ + WhereLoop *pNextLoop; /* Next WhereLoop object in the WhereClause */ + WhereTerm *aLTermSpace[4]; /* Initial aLTerm[] space */ +}; -#ifndef SQLITE_OMIT_TRIGGER -/* -** Delete a linked list of TriggerStep structures. +/* This object holds the prerequisites and the cost of running a +** subquery on one operand of an OR operator in the WHERE clause. +** See WhereOrSet for additional information */ -SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3 *db, TriggerStep *pTriggerStep){ - while( pTriggerStep ){ - TriggerStep * pTmp = pTriggerStep; - pTriggerStep = pTriggerStep->pNext; +struct WhereOrCost { + Bitmask prereq; /* Prerequisites */ + LogEst rRun; /* Cost of running this subquery */ + LogEst nOut; /* Number of outputs for this subquery */ +}; - sqlite3ExprDelete(db, pTmp->pWhere); - sqlite3ExprListDelete(db, pTmp->pExprList); - sqlite3SelectDelete(db, pTmp->pSelect); - sqlite3IdListDelete(db, pTmp->pIdList); +/* The WhereOrSet object holds a set of possible WhereOrCosts that +** correspond to the subquery(s) of OR-clause processing. Only the +** best N_OR_COST elements are retained. +*/ +#define N_OR_COST 3 +struct WhereOrSet { + u16 n; /* Number of valid a[] entries */ + WhereOrCost a[N_OR_COST]; /* Set of best costs */ +}; - sqlite3DbFree(db, pTmp); - } -} + +/* Forward declaration of methods */ +static int whereLoopResize(sqlite3*, WhereLoop*, int); /* -** Given table pTab, return a list of all the triggers attached to -** the table. The list is connected by Trigger.pNext pointers. +** Each instance of this object holds a sequence of WhereLoop objects +** that implement some or all of a query plan. ** -** All of the triggers on pTab that are in the same database as pTab -** are already attached to pTab->pTrigger. But there might be additional -** triggers on pTab in the TEMP schema. This routine prepends all -** TEMP triggers on pTab to the beginning of the pTab->pTrigger list -** and returns the combined list. +** Think of each WhereLoop object as a node in a graph with arcs +** showing dependencies and costs for travelling between nodes. (That is +** not a completely accurate description because WhereLoop costs are a +** vector, not a scalar, and because dependencies are many-to-one, not +** one-to-one as are graph nodes. But it is a useful visualization aid.) +** Then a WherePath object is a path through the graph that visits some +** or all of the WhereLoop objects once. ** -** To state it another way: This routine returns a list of all triggers -** that fire off of pTab. The list will include any TEMP triggers on -** pTab as well as the triggers lised in pTab->pTrigger. +** The "solver" works by creating the N best WherePath objects of length +** 1. Then using those as a basis to compute the N best WherePath objects +** of length 2. And so forth until the length of WherePaths equals the +** number of nodes in the FROM clause. The best (lowest cost) WherePath +** at the end is the chosen query plan. */ -SQLITE_PRIVATE Trigger *sqlite3TriggerList(Parse *pParse, Table *pTab){ - Schema * const pTmpSchema = pParse->db->aDb[1].pSchema; - Trigger *pList = 0; /* List of triggers to return */ - - if( pParse->disableTriggers ){ - return 0; - } - - if( pTmpSchema!=pTab->pSchema ){ - HashElem *p; - assert( sqlite3SchemaMutexHeld(pParse->db, 0, pTmpSchema) ); - for(p=sqliteHashFirst(&pTmpSchema->trigHash); p; p=sqliteHashNext(p)){ - Trigger *pTrig = (Trigger *)sqliteHashData(p); - if( pTrig->pTabSchema==pTab->pSchema - && 0==sqlite3StrICmp(pTrig->table, pTab->zName) - ){ - pTrig->pNext = (pList ? pList : pTab->pTrigger); - pList = pTrig; - } - } - } - - return (pList ? pList : pTab->pTrigger); -} +struct WherePath { + Bitmask maskLoop; /* Bitmask of all WhereLoop objects in this path */ + Bitmask revLoop; /* aLoop[]s that should be reversed for ORDER BY */ + LogEst nRow; /* Estimated number of rows generated by this path */ + LogEst rCost; /* Total cost of this path */ + LogEst rUnsorted; /* Total cost of this path ignoring sorting costs */ + i8 isOrdered; /* No. of ORDER BY terms satisfied. -1 for unknown */ + WhereLoop **aLoop; /* Array of WhereLoop objects implementing this path */ +}; /* -** This is called by the parser when it sees a CREATE TRIGGER statement -** up to the point of the BEGIN before the trigger actions. A Trigger -** structure is generated based on the information available and stored -** in pParse->pNewTrigger. After the trigger actions have been parsed, the -** sqlite3FinishTrigger() function is called to complete the trigger -** construction process. +** The query generator uses an array of instances of this structure to +** help it analyze the subexpressions of the WHERE clause. Each WHERE +** clause subexpression is separated from the others by AND operators, +** usually, or sometimes subexpressions separated by OR. +** +** All WhereTerms are collected into a single WhereClause structure. +** The following identity holds: +** +** WhereTerm.pWC->a[WhereTerm.idx] == WhereTerm +** +** When a term is of the form: +** +** X +** +** where X is a column name and is one of certain operators, +** then WhereTerm.leftCursor and WhereTerm.u.leftColumn record the +** cursor number and column number for X. WhereTerm.eOperator records +** the using a bitmask encoding defined by WO_xxx below. The +** use of a bitmask encoding for the operator allows us to search +** quickly for terms that match any of several different operators. +** +** A WhereTerm might also be two or more subterms connected by OR: +** +** (t1.X ) OR (t1.Y ) OR .... +** +** In this second case, wtFlag has the TERM_ORINFO bit set and eOperator==WO_OR +** and the WhereTerm.u.pOrInfo field points to auxiliary information that +** is collected about the OR clause. +** +** If a term in the WHERE clause does not match either of the two previous +** categories, then eOperator==0. The WhereTerm.pExpr field is still set +** to the original subexpression content and wtFlags is set up appropriately +** but no other fields in the WhereTerm object are meaningful. +** +** When eOperator!=0, prereqRight and prereqAll record sets of cursor numbers, +** but they do so indirectly. A single WhereMaskSet structure translates +** cursor number into bits and the translated bit is stored in the prereq +** fields. The translation is used in order to maximize the number of +** bits that will fit in a Bitmask. The VDBE cursor numbers might be +** spread out over the non-negative integers. For example, the cursor +** numbers might be 3, 8, 9, 10, 20, 23, 41, and 45. The WhereMaskSet +** translates these sparse cursor numbers into consecutive integers +** beginning with 0 in order to make the best possible use of the available +** bits in the Bitmask. So, in the example above, the cursor numbers +** would be mapped into integers 0 through 7. +** +** The number of terms in a join is limited by the number of bits +** in prereqRight and prereqAll. The default is 64 bits, hence SQLite +** is only able to process joins with 64 or fewer tables. */ -SQLITE_PRIVATE void sqlite3BeginTrigger( - Parse *pParse, /* The parse context of the CREATE TRIGGER statement */ - Token *pName1, /* The name of the trigger */ - Token *pName2, /* The name of the trigger */ - int tr_tm, /* One of TK_BEFORE, TK_AFTER, TK_INSTEAD */ - int op, /* One of TK_INSERT, TK_UPDATE, TK_DELETE */ - IdList *pColumns, /* column list if this is an UPDATE OF trigger */ - SrcList *pTableName,/* The name of the table/view the trigger applies to */ - Expr *pWhen, /* WHEN clause */ - int isTemp, /* True if the TEMPORARY keyword is present */ - int noErr /* Suppress errors if the trigger already exists */ -){ - Trigger *pTrigger = 0; /* The new trigger */ - Table *pTab; /* Table that the trigger fires off of */ - char *zName = 0; /* Name of the trigger */ - sqlite3 *db = pParse->db; /* The database connection */ - int iDb; /* The database to store the trigger in */ - Token *pName; /* The unqualified db name */ - DbFixer sFix; /* State vector for the DB fixer */ - int iTabDb; /* Index of the database holding pTab */ - - assert( pName1!=0 ); /* pName1->z might be NULL, but not pName1 itself */ - assert( pName2!=0 ); - assert( op==TK_INSERT || op==TK_UPDATE || op==TK_DELETE ); - assert( op>0 && op<0xff ); - if( isTemp ){ - /* If TEMP was specified, then the trigger name may not be qualified. */ - if( pName2->n>0 ){ - sqlite3ErrorMsg(pParse, "temporary trigger may not have qualified name"); - goto trigger_cleanup; - } - iDb = 1; - pName = pName1; - }else{ - /* Figure out the db that the the trigger will be created in */ - iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName); - if( iDb<0 ){ - goto trigger_cleanup; - } - } - - /* If the trigger name was unqualified, and the table is a temp table, - ** then set iDb to 1 to create the trigger in the temporary database. - ** If sqlite3SrcListLookup() returns 0, indicating the table does not - ** exist, the error is caught by the block below. - */ - if( !pTableName || db->mallocFailed ){ - goto trigger_cleanup; - } - pTab = sqlite3SrcListLookup(pParse, pTableName); - if( db->init.busy==0 && pName2->n==0 && pTab - && pTab->pSchema==db->aDb[1].pSchema ){ - iDb = 1; - } - - /* Ensure the table name matches database name and that the table exists */ - if( db->mallocFailed ) goto trigger_cleanup; - assert( pTableName->nSrc==1 ); - if( sqlite3FixInit(&sFix, pParse, iDb, "trigger", pName) && - sqlite3FixSrcList(&sFix, pTableName) ){ - goto trigger_cleanup; - } - pTab = sqlite3SrcListLookup(pParse, pTableName); - if( !pTab ){ - /* The table does not exist. */ - if( db->init.iDb==1 ){ - /* Ticket #3810. - ** Normally, whenever a table is dropped, all associated triggers are - ** dropped too. But if a TEMP trigger is created on a non-TEMP table - ** and the table is dropped by a different database connection, the - ** trigger is not visible to the database connection that does the - ** drop so the trigger cannot be dropped. This results in an - ** "orphaned trigger" - a trigger whose associated table is missing. - */ - db->init.orphanTrigger = 1; - } - goto trigger_cleanup; - } - if( IsVirtual(pTab) ){ - sqlite3ErrorMsg(pParse, "cannot create triggers on virtual tables"); - goto trigger_cleanup; - } - - /* Check that the trigger name is not reserved and that no trigger of the - ** specified name exists */ - zName = sqlite3NameFromToken(db, pName); - if( !zName || SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ - goto trigger_cleanup; - } - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash), - zName, sqlite3Strlen30(zName)) ){ - if( !noErr ){ - sqlite3ErrorMsg(pParse, "trigger %T already exists", pName); - }else{ - assert( !db->init.busy ); - sqlite3CodeVerifySchema(pParse, iDb); - } - goto trigger_cleanup; - } - - /* Do not create a trigger on a system table */ - if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 ){ - sqlite3ErrorMsg(pParse, "cannot create trigger on system table"); - pParse->nErr++; - goto trigger_cleanup; - } - - /* INSTEAD of triggers are only for views and views only support INSTEAD - ** of triggers. - */ - if( pTab->pSelect && tr_tm!=TK_INSTEAD ){ - sqlite3ErrorMsg(pParse, "cannot create %s trigger on view: %S", - (tr_tm == TK_BEFORE)?"BEFORE":"AFTER", pTableName, 0); - goto trigger_cleanup; - } - if( !pTab->pSelect && tr_tm==TK_INSTEAD ){ - sqlite3ErrorMsg(pParse, "cannot create INSTEAD OF" - " trigger on table: %S", pTableName, 0); - goto trigger_cleanup; - } - iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); +struct WhereTerm { + Expr *pExpr; /* Pointer to the subexpression that is this term */ + int iParent; /* Disable pWC->a[iParent] when this term disabled */ + int leftCursor; /* Cursor number of X in "X " */ + union { + int leftColumn; /* Column number of X in "X " */ + WhereOrInfo *pOrInfo; /* Extra information if (eOperator & WO_OR)!=0 */ + WhereAndInfo *pAndInfo; /* Extra information if (eOperator& WO_AND)!=0 */ + } u; + LogEst truthProb; /* Probability of truth for this expression */ + u16 eOperator; /* A WO_xx value describing */ + u8 wtFlags; /* TERM_xxx bit flags. See below */ + u8 nChild; /* Number of children that must disable us */ + WhereClause *pWC; /* The clause this term is part of */ + Bitmask prereqRight; /* Bitmask of tables used by pExpr->pRight */ + Bitmask prereqAll; /* Bitmask of tables referenced by pExpr */ +}; -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int code = SQLITE_CREATE_TRIGGER; - const char *zDb = db->aDb[iTabDb].zName; - const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb; - if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER; - if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){ - goto trigger_cleanup; - } - if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iTabDb),0,zDb)){ - goto trigger_cleanup; - } - } +/* +** Allowed values of WhereTerm.wtFlags +*/ +#define TERM_DYNAMIC 0x01 /* Need to call sqlite3ExprDelete(db, pExpr) */ +#define TERM_VIRTUAL 0x02 /* Added by the optimizer. Do not code */ +#define TERM_CODED 0x04 /* This term is already coded */ +#define TERM_COPIED 0x08 /* Has a child */ +#define TERM_ORINFO 0x10 /* Need to free the WhereTerm.u.pOrInfo object */ +#define TERM_ANDINFO 0x20 /* Need to free the WhereTerm.u.pAndInfo obj */ +#define TERM_OR_OK 0x40 /* Used during OR-clause processing */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +# define TERM_VNULL 0x80 /* Manufactured x>NULL or x<=NULL term */ +#else +# define TERM_VNULL 0x00 /* Disabled if not using stat3 */ #endif - /* INSTEAD OF triggers can only appear on views and BEFORE triggers - ** cannot appear on views. So we might as well translate every - ** INSTEAD OF trigger into a BEFORE trigger. It simplifies code - ** elsewhere. - */ - if (tr_tm == TK_INSTEAD){ - tr_tm = TK_BEFORE; - } - - /* Build the Trigger object */ - pTrigger = (Trigger*)sqlite3DbMallocZero(db, sizeof(Trigger)); - if( pTrigger==0 ) goto trigger_cleanup; - pTrigger->zName = zName; - zName = 0; - pTrigger->table = sqlite3DbStrDup(db, pTableName->a[0].zName); - pTrigger->pSchema = db->aDb[iDb].pSchema; - pTrigger->pTabSchema = pTab->pSchema; - pTrigger->op = (u8)op; - pTrigger->tr_tm = tr_tm==TK_BEFORE ? TRIGGER_BEFORE : TRIGGER_AFTER; - pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); - pTrigger->pColumns = sqlite3IdListDup(db, pColumns); - assert( pParse->pNewTrigger==0 ); - pParse->pNewTrigger = pTrigger; - -trigger_cleanup: - sqlite3DbFree(db, zName); - sqlite3SrcListDelete(db, pTableName); - sqlite3IdListDelete(db, pColumns); - sqlite3ExprDelete(db, pWhen); - if( !pParse->pNewTrigger ){ - sqlite3DeleteTrigger(db, pTrigger); - }else{ - assert( pParse->pNewTrigger==pTrigger ); - } -} - /* -** This routine is called after all of the trigger actions have been parsed -** in order to complete the process of building the trigger. +** An instance of the WhereScan object is used as an iterator for locating +** terms in the WHERE clause that are useful to the query planner. */ -SQLITE_PRIVATE void sqlite3FinishTrigger( - Parse *pParse, /* Parser context */ - TriggerStep *pStepList, /* The triggered program */ - Token *pAll /* Token that describes the complete CREATE TRIGGER */ -){ - Trigger *pTrig = pParse->pNewTrigger; /* Trigger being finished */ - char *zName; /* Name of trigger */ - sqlite3 *db = pParse->db; /* The database */ - DbFixer sFix; /* Fixer object */ - int iDb; /* Database containing the trigger */ - Token nameToken; /* Trigger name for error reporting */ - - pParse->pNewTrigger = 0; - if( NEVER(pParse->nErr) || !pTrig ) goto triggerfinish_cleanup; - zName = pTrig->zName; - iDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema); - pTrig->step_list = pStepList; - while( pStepList ){ - pStepList->pTrig = pTrig; - pStepList = pStepList->pNext; - } - nameToken.z = pTrig->zName; - nameToken.n = sqlite3Strlen30(nameToken.z); - if( sqlite3FixInit(&sFix, pParse, iDb, "trigger", &nameToken) - && sqlite3FixTriggerStep(&sFix, pTrig->step_list) ){ - goto triggerfinish_cleanup; - } - - /* if we are not initializing, - ** build the sqlite_master entry - */ - if( !db->init.busy ){ - Vdbe *v; - char *z; +struct WhereScan { + WhereClause *pOrigWC; /* Original, innermost WhereClause */ + WhereClause *pWC; /* WhereClause currently being scanned */ + char *zCollName; /* Required collating sequence, if not NULL */ + char idxaff; /* Must match this affinity, if zCollName!=NULL */ + unsigned char nEquiv; /* Number of entries in aEquiv[] */ + unsigned char iEquiv; /* Next unused slot in aEquiv[] */ + u32 opMask; /* Acceptable operators */ + int k; /* Resume scanning at this->pWC->a[this->k] */ + int aEquiv[22]; /* Cursor,Column pairs for equivalence classes */ +}; - /* Make an entry in the sqlite_master table */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto triggerfinish_cleanup; - sqlite3BeginWriteOperation(pParse, 0, iDb); - z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n); - sqlite3NestedParse(pParse, - "INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')", - db->aDb[iDb].zName, SCHEMA_TABLE(iDb), zName, - pTrig->table, z); - sqlite3DbFree(db, z); - sqlite3ChangeCookie(pParse, iDb); - sqlite3VdbeAddParseSchemaOp(v, iDb, - sqlite3MPrintf(db, "type='trigger' AND name='%q'", zName)); - } +/* +** An instance of the following structure holds all information about a +** WHERE clause. Mostly this is a container for one or more WhereTerms. +** +** Explanation of pOuter: For a WHERE clause of the form +** +** a AND ((b AND c) OR (d AND e)) AND f +** +** There are separate WhereClause objects for the whole clause and for +** the subclauses "(b AND c)" and "(d AND e)". The pOuter field of the +** subclauses points to the WhereClause object for the whole clause. +*/ +struct WhereClause { + WhereInfo *pWInfo; /* WHERE clause processing context */ + WhereClause *pOuter; /* Outer conjunction */ + u8 op; /* Split operator. TK_AND or TK_OR */ + int nTerm; /* Number of terms */ + int nSlot; /* Number of entries in a[] */ + WhereTerm *a; /* Each a[] describes a term of the WHERE cluase */ +#if defined(SQLITE_SMALL_STACK) + WhereTerm aStatic[1]; /* Initial static space for a[] */ +#else + WhereTerm aStatic[8]; /* Initial static space for a[] */ +#endif +}; - if( db->init.busy ){ - Trigger *pLink = pTrig; - Hash *pHash = &db->aDb[iDb].pSchema->trigHash; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pTrig = sqlite3HashInsert(pHash, zName, sqlite3Strlen30(zName), pTrig); - if( pTrig ){ - db->mallocFailed = 1; - }else if( pLink->pSchema==pLink->pTabSchema ){ - Table *pTab; - int n = sqlite3Strlen30(pLink->table); - pTab = sqlite3HashFind(&pLink->pTabSchema->tblHash, pLink->table, n); - assert( pTab!=0 ); - pLink->pNext = pTab->pTrigger; - pTab->pTrigger = pLink; - } - } +/* +** A WhereTerm with eOperator==WO_OR has its u.pOrInfo pointer set to +** a dynamically allocated instance of the following structure. +*/ +struct WhereOrInfo { + WhereClause wc; /* Decomposition into subterms */ + Bitmask indexable; /* Bitmask of all indexable tables in the clause */ +}; -triggerfinish_cleanup: - sqlite3DeleteTrigger(db, pTrig); - assert( !pParse->pNewTrigger ); - sqlite3DeleteTriggerStep(db, pStepList); -} +/* +** A WhereTerm with eOperator==WO_AND has its u.pAndInfo pointer set to +** a dynamically allocated instance of the following structure. +*/ +struct WhereAndInfo { + WhereClause wc; /* The subexpression broken out */ +}; /* -** Turn a SELECT statement (that the pSelect parameter points to) into -** a trigger step. Return a pointer to a TriggerStep structure. +** An instance of the following structure keeps track of a mapping +** between VDBE cursor numbers and bits of the bitmasks in WhereTerm. ** -** The parser calls this routine when it finds a SELECT statement in -** body of a TRIGGER. +** The VDBE cursor numbers are small integers contained in +** SrcList_item.iCursor and Expr.iTable fields. For any given WHERE +** clause, the cursor numbers might not begin with 0 and they might +** contain gaps in the numbering sequence. But we want to make maximum +** use of the bits in our bitmasks. This structure provides a mapping +** from the sparse cursor numbers into consecutive integers beginning +** with 0. +** +** If WhereMaskSet.ix[A]==B it means that The A-th bit of a Bitmask +** corresponds VDBE cursor number B. The A-th bit of a bitmask is 1<3, 5->1, 8->2, 29->0, +** 57->5, 73->4. Or one of 719 other combinations might be used. It +** does not really matter. What is important is that sparse cursor +** numbers all get mapped into bit numbers that begin with 0 and contain +** no gaps. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelect){ - TriggerStep *pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep)); - if( pTriggerStep==0 ) { - sqlite3SelectDelete(db, pSelect); - return 0; - } - pTriggerStep->op = TK_SELECT; - pTriggerStep->pSelect = pSelect; - pTriggerStep->orconf = OE_Default; - return pTriggerStep; -} +struct WhereMaskSet { + int n; /* Number of assigned cursor values */ + int ix[BMS]; /* Cursor assigned to each bit */ +}; /* -** Allocate space to hold a new trigger step. The allocated space -** holds both the TriggerStep object and the TriggerStep.target.z string. +** This object is a convenience wrapper holding all information needed +** to construct WhereLoop objects for a particular query. +*/ +struct WhereLoopBuilder { + WhereInfo *pWInfo; /* Information about this WHERE */ + WhereClause *pWC; /* WHERE clause terms */ + ExprList *pOrderBy; /* ORDER BY clause */ + WhereLoop *pNew; /* Template WhereLoop */ + WhereOrSet *pOrSet; /* Record best loops here, if not NULL */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + UnpackedRecord *pRec; /* Probe for stat4 (if required) */ + int nRecValid; /* Number of valid fields currently in pRec */ +#endif +}; + +/* +** The WHERE clause processing routine has two halves. The +** first part does the start of the WHERE loop and the second +** half does the tail of the WHERE loop. An instance of +** this structure is returned by the first half and passed +** into the second half to give some continuity. ** -** If an OOM error occurs, NULL is returned and db->mallocFailed is set. +** An instance of this object holds the complete state of the query +** planner. */ -static TriggerStep *triggerStepAllocate( - sqlite3 *db, /* Database connection */ - u8 op, /* Trigger opcode */ - Token *pName /* The target name */ -){ - TriggerStep *pTriggerStep; +struct WhereInfo { + Parse *pParse; /* Parsing and code generating context */ + SrcList *pTabList; /* List of tables in the join */ + ExprList *pOrderBy; /* The ORDER BY clause or NULL */ + ExprList *pResultSet; /* Result set. DISTINCT operates on these */ + WhereLoop *pLoops; /* List of all WhereLoop objects */ + Bitmask revMask; /* Mask of ORDER BY terms that need reversing */ + LogEst nRowOut; /* Estimated number of output rows */ + u16 wctrlFlags; /* Flags originally passed to sqlite3WhereBegin() */ + i8 nOBSat; /* Number of ORDER BY terms satisfied by indices */ + u8 sorted; /* True if really sorted (not just grouped) */ + u8 okOnePass; /* Ok to use one-pass algorithm for UPDATE/DELETE */ + u8 untestedTerms; /* Not all WHERE terms resolved by outer loop */ + u8 eDistinct; /* One of the WHERE_DISTINCT_* values below */ + u8 nLevel; /* Number of nested loop */ + int iTop; /* The very beginning of the WHERE loop */ + int iContinue; /* Jump here to continue with next record */ + int iBreak; /* Jump here to break out of the loop */ + int savedNQueryLoop; /* pParse->nQueryLoop outside the WHERE loop */ + int aiCurOnePass[2]; /* OP_OpenWrite cursors for the ONEPASS opt */ + WhereMaskSet sMaskSet; /* Map cursor numbers to bitmasks */ + WhereClause sWC; /* Decomposition of the WHERE clause */ + WhereLevel a[1]; /* Information about each nest loop in WHERE */ +}; - pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep) + pName->n); - if( pTriggerStep ){ - char *z = (char*)&pTriggerStep[1]; - memcpy(z, pName->z, pName->n); - pTriggerStep->target.z = z; - pTriggerStep->target.n = pName->n; - pTriggerStep->op = op; - } - return pTriggerStep; -} +/* +** Bitmasks for the operators on WhereTerm objects. These are all +** operators that are of interest to the query planner. An +** OR-ed combination of these values can be used when searching for +** particular WhereTerms within a WhereClause. +*/ +#define WO_IN 0x001 +#define WO_EQ 0x002 +#define WO_LT (WO_EQ<<(TK_LT-TK_EQ)) +#define WO_LE (WO_EQ<<(TK_LE-TK_EQ)) +#define WO_GT (WO_EQ<<(TK_GT-TK_EQ)) +#define WO_GE (WO_EQ<<(TK_GE-TK_EQ)) +#define WO_MATCH 0x040 +#define WO_ISNULL 0x080 +#define WO_OR 0x100 /* Two or more OR-connected terms */ +#define WO_AND 0x200 /* Two or more AND-connected terms */ +#define WO_EQUIV 0x400 /* Of the form A==B, both columns */ +#define WO_NOOP 0x800 /* This term does not restrict search space */ + +#define WO_ALL 0xfff /* Mask of all possible WO_* values */ +#define WO_SINGLE 0x0ff /* Mask of all non-compound WO_* values */ /* -** Build a trigger step out of an INSERT statement. Return a pointer -** to the new trigger step. -** -** The parser calls this routine when it sees an INSERT inside the -** body of a trigger. +** These are definitions of bits in the WhereLoop.wsFlags field. +** The particular combination of bits in each WhereLoop help to +** determine the algorithm that WhereLoop represents. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep( - sqlite3 *db, /* The database connection */ - Token *pTableName, /* Name of the table into which we insert */ - IdList *pColumn, /* List of columns in pTableName to insert into */ - ExprList *pEList, /* The VALUE clause: a list of values to be inserted */ - Select *pSelect, /* A SELECT statement that supplies values */ - u8 orconf /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ -){ - TriggerStep *pTriggerStep; +#define WHERE_COLUMN_EQ 0x00000001 /* x=EXPR */ +#define WHERE_COLUMN_RANGE 0x00000002 /* xEXPR */ +#define WHERE_COLUMN_IN 0x00000004 /* x IN (...) */ +#define WHERE_COLUMN_NULL 0x00000008 /* x IS NULL */ +#define WHERE_CONSTRAINT 0x0000000f /* Any of the WHERE_COLUMN_xxx values */ +#define WHERE_TOP_LIMIT 0x00000010 /* xEXPR or x>=EXPR constraint */ +#define WHERE_BOTH_LIMIT 0x00000030 /* Both x>EXPR and xmallocFailed); - - pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName); - if( pTriggerStep ){ - pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); - pTriggerStep->pIdList = pColumn; - pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); - pTriggerStep->orconf = orconf; - }else{ - sqlite3IdListDelete(db, pColumn); - } - sqlite3ExprListDelete(db, pEList); - sqlite3SelectDelete(db, pSelect); +/************** End of whereInt.h ********************************************/ +/************** Continuing where we left off in where.c **********************/ - return pTriggerStep; +/* +** Return the estimated number of output rows from a WHERE clause +*/ +SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo *pWInfo){ + return sqlite3LogEstToInt(pWInfo->nRowOut); } /* -** Construct a trigger step that implements an UPDATE statement and return -** a pointer to that trigger step. The parser calls this routine when it -** sees an UPDATE statement inside the body of a CREATE TRIGGER. +** Return one of the WHERE_DISTINCT_xxxxx values to indicate how this +** WHERE clause returns outputs for DISTINCT processing. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep( - sqlite3 *db, /* The database connection */ - Token *pTableName, /* Name of the table to be updated */ - ExprList *pEList, /* The SET clause: list of column and new values */ - Expr *pWhere, /* The WHERE clause */ - u8 orconf /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ -){ - TriggerStep *pTriggerStep; - - pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName); - if( pTriggerStep ){ - pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); - pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); - pTriggerStep->orconf = orconf; - } - sqlite3ExprListDelete(db, pEList); - sqlite3ExprDelete(db, pWhere); - return pTriggerStep; +SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo *pWInfo){ + return pWInfo->eDistinct; } /* -** Construct a trigger step that implements a DELETE statement and return -** a pointer to that trigger step. The parser calls this routine when it -** sees a DELETE statement inside the body of a CREATE TRIGGER. +** Return TRUE if the WHERE clause returns rows in ORDER BY order. +** Return FALSE if the output needs to be sorted. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep( - sqlite3 *db, /* Database connection */ - Token *pTableName, /* The table from which rows are deleted */ - Expr *pWhere /* The WHERE clause */ -){ - TriggerStep *pTriggerStep; +SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo *pWInfo){ + return pWInfo->nOBSat; +} - pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName); - if( pTriggerStep ){ - pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); - pTriggerStep->orconf = OE_Default; - } - sqlite3ExprDelete(db, pWhere); - return pTriggerStep; +/* +** Return the VDBE address or label to jump to in order to continue +** immediately with the next row of a WHERE clause. +*/ +SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo *pWInfo){ + assert( pWInfo->iContinue!=0 ); + return pWInfo->iContinue; } -/* -** Recursively delete a Trigger structure +/* +** Return the VDBE address or label to jump to in order to break +** out of a WHERE loop. */ -SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3 *db, Trigger *pTrigger){ - if( pTrigger==0 ) return; - sqlite3DeleteTriggerStep(db, pTrigger->step_list); - sqlite3DbFree(db, pTrigger->zName); - sqlite3DbFree(db, pTrigger->table); - sqlite3ExprDelete(db, pTrigger->pWhen); - sqlite3IdListDelete(db, pTrigger->pColumns); - sqlite3DbFree(db, pTrigger); +SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo *pWInfo){ + return pWInfo->iBreak; } /* -** This function is called to drop a trigger from the database schema. +** Return TRUE if an UPDATE or DELETE statement can operate directly on +** the rowids returned by a WHERE clause. Return FALSE if doing an +** UPDATE or DELETE might change subsequent WHERE clause results. ** -** This may be called directly from the parser and therefore identifies -** the trigger by name. The sqlite3DropTriggerPtr() routine does the -** same job as this routine except it takes a pointer to the trigger -** instead of the trigger name. -**/ -SQLITE_PRIVATE void sqlite3DropTrigger(Parse *pParse, SrcList *pName, int noErr){ - Trigger *pTrigger = 0; - int i; - const char *zDb; - const char *zName; - int nName; - sqlite3 *db = pParse->db; - - if( db->mallocFailed ) goto drop_trigger_cleanup; - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ - goto drop_trigger_cleanup; - } - - assert( pName->nSrc==1 ); - zDb = pName->a[0].zDatabase; - zName = pName->a[0].zName; - nName = sqlite3Strlen30(zName); - assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) ); - for(i=OMIT_TEMPDB; inDb; i++){ - int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ - if( zDb && sqlite3StrICmp(db->aDb[j].zName, zDb) ) continue; - assert( sqlite3SchemaMutexHeld(db, j, 0) ); - pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName, nName); - if( pTrigger ) break; - } - if( !pTrigger ){ - if( !noErr ){ - sqlite3ErrorMsg(pParse, "no such trigger: %S", pName, 0); - }else{ - sqlite3CodeVerifyNamedSchema(pParse, zDb); - } - pParse->checkSchema = 1; - goto drop_trigger_cleanup; - } - sqlite3DropTriggerPtr(pParse, pTrigger); - -drop_trigger_cleanup: - sqlite3SrcListDelete(db, pName); +** If the ONEPASS optimization is used (if this routine returns true) +** then also write the indices of open cursors used by ONEPASS +** into aiCur[0] and aiCur[1]. iaCur[0] gets the cursor of the data +** table and iaCur[1] gets the cursor used by an auxiliary index. +** Either value may be -1, indicating that cursor is not used. +** Any cursors returned will have been opened for writing. +** +** aiCur[0] and aiCur[1] both get -1 if the where-clause logic is +** unable to use the ONEPASS optimization. +*/ +SQLITE_PRIVATE int sqlite3WhereOkOnePass(WhereInfo *pWInfo, int *aiCur){ + memcpy(aiCur, pWInfo->aiCurOnePass, sizeof(int)*2); + return pWInfo->okOnePass; } /* -** Return a pointer to the Table structure for the table that a trigger -** is set on. +** Move the content of pSrc into pDest */ -static Table *tableOfTrigger(Trigger *pTrigger){ - int n = sqlite3Strlen30(pTrigger->table); - return sqlite3HashFind(&pTrigger->pTabSchema->tblHash, pTrigger->table, n); +static void whereOrMove(WhereOrSet *pDest, WhereOrSet *pSrc){ + pDest->n = pSrc->n; + memcpy(pDest->a, pSrc->a, pDest->n*sizeof(pDest->a[0])); } - /* -** Drop a trigger given a pointer to that trigger. +** Try to insert a new prerequisite/cost entry into the WhereOrSet pSet. +** +** The new entry might overwrite an existing entry, or it might be +** appended, or it might be discarded. Do whatever is the right thing +** so that pSet keeps the N_OR_COST best entries seen so far. */ -SQLITE_PRIVATE void sqlite3DropTriggerPtr(Parse *pParse, Trigger *pTrigger){ - Table *pTable; - Vdbe *v; - sqlite3 *db = pParse->db; - int iDb; - - iDb = sqlite3SchemaToIndex(pParse->db, pTrigger->pSchema); - assert( iDb>=0 && iDbnDb ); - pTable = tableOfTrigger(pTrigger); - assert( pTable ); - assert( pTable->pSchema==pTrigger->pSchema || iDb==1 ); -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int code = SQLITE_DROP_TRIGGER; - const char *zDb = db->aDb[iDb].zName; - const char *zTab = SCHEMA_TABLE(iDb); - if( iDb==1 ) code = SQLITE_DROP_TEMP_TRIGGER; - if( sqlite3AuthCheck(pParse, code, pTrigger->zName, pTable->zName, zDb) || - sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){ - return; +static int whereOrInsert( + WhereOrSet *pSet, /* The WhereOrSet to be updated */ + Bitmask prereq, /* Prerequisites of the new entry */ + LogEst rRun, /* Run-cost of the new entry */ + LogEst nOut /* Number of outputs for the new entry */ +){ + u16 i; + WhereOrCost *p; + for(i=pSet->n, p=pSet->a; i>0; i--, p++){ + if( rRun<=p->rRun && (prereq & p->prereq)==prereq ){ + goto whereOrInsert_done; + } + if( p->rRun<=rRun && (p->prereq & prereq)==p->prereq ){ + return 0; } } -#endif - - /* Generate code to destroy the database record of the trigger. - */ - assert( pTable!=0 ); - if( (v = sqlite3GetVdbe(pParse))!=0 ){ - int base; - static const VdbeOpList dropTrigger[] = { - { OP_Rewind, 0, ADDR(9), 0}, - { OP_String8, 0, 1, 0}, /* 1 */ - { OP_Column, 0, 1, 2}, - { OP_Ne, 2, ADDR(8), 1}, - { OP_String8, 0, 1, 0}, /* 4: "trigger" */ - { OP_Column, 0, 0, 2}, - { OP_Ne, 2, ADDR(8), 1}, - { OP_Delete, 0, 0, 0}, - { OP_Next, 0, ADDR(1), 0}, /* 8 */ - }; - - sqlite3BeginWriteOperation(pParse, 0, iDb); - sqlite3OpenMasterTable(pParse, iDb); - base = sqlite3VdbeAddOpList(v, ArraySize(dropTrigger), dropTrigger); - sqlite3VdbeChangeP4(v, base+1, pTrigger->zName, P4_TRANSIENT); - sqlite3VdbeChangeP4(v, base+4, "trigger", P4_STATIC); - sqlite3ChangeCookie(pParse, iDb); - sqlite3VdbeAddOp2(v, OP_Close, 0, 0); - sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0); - if( pParse->nMem<3 ){ - pParse->nMem = 3; + if( pSet->na[pSet->n++]; + p->nOut = nOut; + }else{ + p = pSet->a; + for(i=1; in; i++){ + if( p->rRun>pSet->a[i].rRun ) p = pSet->a + i; } + if( p->rRun<=rRun ) return 0; } +whereOrInsert_done: + p->prereq = prereq; + p->rRun = rRun; + if( p->nOut>nOut ) p->nOut = nOut; + return 1; } /* -** Remove a trigger from the hash tables of the sqlite* pointer. +** Initialize a preallocated WhereClause structure. */ -SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3 *db, int iDb, const char *zName){ - Trigger *pTrigger; - Hash *pHash; - - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pHash = &(db->aDb[iDb].pSchema->trigHash); - pTrigger = sqlite3HashInsert(pHash, zName, sqlite3Strlen30(zName), 0); - if( ALWAYS(pTrigger) ){ - if( pTrigger->pSchema==pTrigger->pTabSchema ){ - Table *pTab = tableOfTrigger(pTrigger); - Trigger **pp; - for(pp=&pTab->pTrigger; *pp!=pTrigger; pp=&((*pp)->pNext)); - *pp = (*pp)->pNext; - } - sqlite3DeleteTrigger(db, pTrigger); - db->flags |= SQLITE_InternChanges; - } +static void whereClauseInit( + WhereClause *pWC, /* The WhereClause to be initialized */ + WhereInfo *pWInfo /* The WHERE processing context */ +){ + pWC->pWInfo = pWInfo; + pWC->pOuter = 0; + pWC->nTerm = 0; + pWC->nSlot = ArraySize(pWC->aStatic); + pWC->a = pWC->aStatic; } +/* Forward reference */ +static void whereClauseClear(WhereClause*); + /* -** pEList is the SET clause of an UPDATE statement. Each entry -** in pEList is of the format =. If any of the entries -** in pEList have an which matches an identifier in pIdList, -** then return TRUE. If pIdList==NULL, then it is considered a -** wildcard that matches anything. Likewise if pEList==NULL then -** it matches anything so always return true. Return false only -** if there is no match. +** Deallocate all memory associated with a WhereOrInfo object. */ -static int checkColumnOverlap(IdList *pIdList, ExprList *pEList){ - int e; - if( pIdList==0 || NEVER(pEList==0) ) return 1; - for(e=0; enExpr; e++){ - if( sqlite3IdListIndex(pIdList, pEList->a[e].zName)>=0 ) return 1; - } - return 0; +static void whereOrInfoDelete(sqlite3 *db, WhereOrInfo *p){ + whereClauseClear(&p->wc); + sqlite3DbFree(db, p); } /* -** Return a list of all triggers on table pTab if there exists at least -** one trigger that must be fired when an operation of type 'op' is -** performed on the table, and, if that operation is an UPDATE, if at -** least one of the columns in pChanges is being modified. +** Deallocate all memory associated with a WhereAndInfo object. */ -SQLITE_PRIVATE Trigger *sqlite3TriggersExist( - Parse *pParse, /* Parse context */ - Table *pTab, /* The table the contains the triggers */ - int op, /* one of TK_DELETE, TK_INSERT, TK_UPDATE */ - ExprList *pChanges, /* Columns that change in an UPDATE statement */ - int *pMask /* OUT: Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ -){ - int mask = 0; - Trigger *pList = 0; - Trigger *p; +static void whereAndInfoDelete(sqlite3 *db, WhereAndInfo *p){ + whereClauseClear(&p->wc); + sqlite3DbFree(db, p); +} - if( (pParse->db->flags & SQLITE_EnableTrigger)!=0 ){ - pList = sqlite3TriggerList(pParse, pTab); - } - assert( pList==0 || IsVirtual(pTab)==0 ); - for(p=pList; p; p=p->pNext){ - if( p->op==op && checkColumnOverlap(p->pColumns, pChanges) ){ - mask |= p->tr_tm; +/* +** Deallocate a WhereClause structure. The WhereClause structure +** itself is not freed. This routine is the inverse of whereClauseInit(). +*/ +static void whereClauseClear(WhereClause *pWC){ + int i; + WhereTerm *a; + sqlite3 *db = pWC->pWInfo->pParse->db; + for(i=pWC->nTerm-1, a=pWC->a; i>=0; i--, a++){ + if( a->wtFlags & TERM_DYNAMIC ){ + sqlite3ExprDelete(db, a->pExpr); + } + if( a->wtFlags & TERM_ORINFO ){ + whereOrInfoDelete(db, a->u.pOrInfo); + }else if( a->wtFlags & TERM_ANDINFO ){ + whereAndInfoDelete(db, a->u.pAndInfo); } } - if( pMask ){ - *pMask = mask; + if( pWC->a!=pWC->aStatic ){ + sqlite3DbFree(db, pWC->a); } - return (mask ? pList : 0); } /* -** Convert the pStep->target token into a SrcList and return a pointer -** to that SrcList. +** Add a single new WhereTerm entry to the WhereClause object pWC. +** The new WhereTerm object is constructed from Expr p and with wtFlags. +** The index in pWC->a[] of the new WhereTerm is returned on success. +** 0 is returned if the new WhereTerm could not be added due to a memory +** allocation error. The memory allocation failure will be recorded in +** the db->mallocFailed flag so that higher-level functions can detect it. ** -** This routine adds a specific database name, if needed, to the target when -** forming the SrcList. This prevents a trigger in one database from -** referring to a target in another database. An exception is when the -** trigger is in TEMP in which case it can refer to any other database it -** wants. +** This routine will increase the size of the pWC->a[] array as necessary. +** +** If the wtFlags argument includes TERM_DYNAMIC, then responsibility +** for freeing the expression p is assumed by the WhereClause object pWC. +** This is true even if this routine fails to allocate a new WhereTerm. +** +** WARNING: This routine might reallocate the space used to store +** WhereTerms. All pointers to WhereTerms should be invalidated after +** calling this routine. Such pointers may be reinitialized by referencing +** the pWC->a[] array. */ -static SrcList *targetSrcList( - Parse *pParse, /* The parsing context */ - TriggerStep *pStep /* The trigger containing the target token */ -){ - int iDb; /* Index of the database to use */ - SrcList *pSrc; /* SrcList to be returned */ - - pSrc = sqlite3SrcListAppend(pParse->db, 0, &pStep->target, 0); - if( pSrc ){ - assert( pSrc->nSrc>0 ); - assert( pSrc->a!=0 ); - iDb = sqlite3SchemaToIndex(pParse->db, pStep->pTrig->pSchema); - if( iDb==0 || iDb>=2 ){ - sqlite3 *db = pParse->db; - assert( iDbdb->nDb ); - pSrc->a[pSrc->nSrc-1].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName); +static int whereClauseInsert(WhereClause *pWC, Expr *p, u8 wtFlags){ + WhereTerm *pTerm; + int idx; + testcase( wtFlags & TERM_VIRTUAL ); + if( pWC->nTerm>=pWC->nSlot ){ + WhereTerm *pOld = pWC->a; + sqlite3 *db = pWC->pWInfo->pParse->db; + pWC->a = sqlite3DbMallocRaw(db, sizeof(pWC->a[0])*pWC->nSlot*2 ); + if( pWC->a==0 ){ + if( wtFlags & TERM_DYNAMIC ){ + sqlite3ExprDelete(db, p); + } + pWC->a = pOld; + return 0; + } + memcpy(pWC->a, pOld, sizeof(pWC->a[0])*pWC->nTerm); + if( pOld!=pWC->aStatic ){ + sqlite3DbFree(db, pOld); } + pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]); } - return pSrc; + pTerm = &pWC->a[idx = pWC->nTerm++]; + if( p && ExprHasProperty(p, EP_Unlikely) ){ + pTerm->truthProb = sqlite3LogEst(p->iTable) - 99; + }else{ + pTerm->truthProb = 1; + } + pTerm->pExpr = sqlite3ExprSkipCollate(p); + pTerm->wtFlags = wtFlags; + pTerm->pWC = pWC; + pTerm->iParent = -1; + return idx; } /* -** Generate VDBE code for the statements inside the body of a single -** trigger. +** This routine identifies subexpressions in the WHERE clause where +** each subexpression is separated by the AND operator or some other +** operator specified in the op parameter. The WhereClause structure +** is filled with pointers to subexpressions. For example: +** +** WHERE a=='hello' AND coalesce(b,11)<10 AND (c+12!=d OR c==22) +** \________/ \_______________/ \________________/ +** slot[0] slot[1] slot[2] +** +** The original WHERE clause in pExpr is unaltered. All this routine +** does is make slot[] entries point to substructure within pExpr. +** +** In the previous sentence and in the diagram, "slot[]" refers to +** the WhereClause.a[] array. The slot[] array grows as needed to contain +** all terms of the WHERE clause. */ -static int codeTriggerProgram( - Parse *pParse, /* The parser context */ - TriggerStep *pStepList, /* List of statements inside the trigger body */ - int orconf /* Conflict algorithm. (OE_Abort, etc) */ -){ - TriggerStep *pStep; - Vdbe *v = pParse->pVdbe; - sqlite3 *db = pParse->db; +static void whereSplit(WhereClause *pWC, Expr *pExpr, u8 op){ + pWC->op = op; + if( pExpr==0 ) return; + if( pExpr->op!=op ){ + whereClauseInsert(pWC, pExpr, 0); + }else{ + whereSplit(pWC, pExpr->pLeft, op); + whereSplit(pWC, pExpr->pRight, op); + } +} - assert( pParse->pTriggerTab && pParse->pToplevel ); - assert( pStepList ); - assert( v!=0 ); - for(pStep=pStepList; pStep; pStep=pStep->pNext){ - /* Figure out the ON CONFLICT policy that will be used for this step - ** of the trigger program. If the statement that caused this trigger - ** to fire had an explicit ON CONFLICT, then use it. Otherwise, use - ** the ON CONFLICT policy that was specified as part of the trigger - ** step statement. Example: - ** - ** CREATE TRIGGER AFTER INSERT ON t1 BEGIN; - ** INSERT OR REPLACE INTO t2 VALUES(new.a, new.b); - ** END; - ** - ** INSERT INTO t1 ... ; -- insert into t2 uses REPLACE policy - ** INSERT OR IGNORE INTO t1 ... ; -- insert into t2 uses IGNORE policy - */ - pParse->eOrconf = (orconf==OE_Default)?pStep->orconf:(u8)orconf; +/* +** Initialize a WhereMaskSet object +*/ +#define initMaskSet(P) (P)->n=0 - switch( pStep->op ){ - case TK_UPDATE: { - sqlite3Update(pParse, - targetSrcList(pParse, pStep), - sqlite3ExprListDup(db, pStep->pExprList, 0), - sqlite3ExprDup(db, pStep->pWhere, 0), - pParse->eOrconf - ); - break; - } - case TK_INSERT: { - sqlite3Insert(pParse, - targetSrcList(pParse, pStep), - sqlite3ExprListDup(db, pStep->pExprList, 0), - sqlite3SelectDup(db, pStep->pSelect, 0), - sqlite3IdListDup(db, pStep->pIdList), - pParse->eOrconf - ); - break; - } - case TK_DELETE: { - sqlite3DeleteFrom(pParse, - targetSrcList(pParse, pStep), - sqlite3ExprDup(db, pStep->pWhere, 0) - ); - break; - } - default: assert( pStep->op==TK_SELECT ); { - SelectDest sDest; - Select *pSelect = sqlite3SelectDup(db, pStep->pSelect, 0); - sqlite3SelectDestInit(&sDest, SRT_Discard, 0); - sqlite3Select(pParse, pSelect, &sDest); - sqlite3SelectDelete(db, pSelect); - break; - } - } - if( pStep->op!=TK_SELECT ){ - sqlite3VdbeAddOp0(v, OP_ResetCount); +/* +** Return the bitmask for the given cursor number. Return 0 if +** iCursor is not in the set. +*/ +static Bitmask getMask(WhereMaskSet *pMaskSet, int iCursor){ + int i; + assert( pMaskSet->n<=(int)sizeof(Bitmask)*8 ); + for(i=0; in; i++){ + if( pMaskSet->ix[i]==iCursor ){ + return MASKBIT(i); } } - return 0; } -#ifdef SQLITE_DEBUG /* -** This function is used to add VdbeComment() annotations to a VDBE -** program. It is not used in production code, only for debugging. +** Create a new mask for cursor iCursor. +** +** There is one cursor per table in the FROM clause. The number of +** tables in the FROM clause is limited by a test early in the +** sqlite3WhereBegin() routine. So we know that the pMaskSet->ix[] +** array will never overflow. */ -static const char *onErrorText(int onError){ - switch( onError ){ - case OE_Abort: return "abort"; - case OE_Rollback: return "rollback"; - case OE_Fail: return "fail"; - case OE_Replace: return "replace"; - case OE_Ignore: return "ignore"; - case OE_Default: return "default"; +static void createMask(WhereMaskSet *pMaskSet, int iCursor){ + assert( pMaskSet->n < ArraySize(pMaskSet->ix) ); + pMaskSet->ix[pMaskSet->n++] = iCursor; +} + +/* +** These routines walk (recursively) an expression tree and generate +** a bitmask indicating which tables are used in that expression +** tree. +*/ +static Bitmask exprListTableUsage(WhereMaskSet*, ExprList*); +static Bitmask exprSelectTableUsage(WhereMaskSet*, Select*); +static Bitmask exprTableUsage(WhereMaskSet *pMaskSet, Expr *p){ + Bitmask mask = 0; + if( p==0 ) return 0; + if( p->op==TK_COLUMN ){ + mask = getMask(pMaskSet, p->iTable); + return mask; } - return "n/a"; + mask = exprTableUsage(pMaskSet, p->pRight); + mask |= exprTableUsage(pMaskSet, p->pLeft); + if( ExprHasProperty(p, EP_xIsSelect) ){ + mask |= exprSelectTableUsage(pMaskSet, p->x.pSelect); + }else{ + mask |= exprListTableUsage(pMaskSet, p->x.pList); + } + return mask; +} +static Bitmask exprListTableUsage(WhereMaskSet *pMaskSet, ExprList *pList){ + int i; + Bitmask mask = 0; + if( pList ){ + for(i=0; inExpr; i++){ + mask |= exprTableUsage(pMaskSet, pList->a[i].pExpr); + } + } + return mask; +} +static Bitmask exprSelectTableUsage(WhereMaskSet *pMaskSet, Select *pS){ + Bitmask mask = 0; + while( pS ){ + SrcList *pSrc = pS->pSrc; + mask |= exprListTableUsage(pMaskSet, pS->pEList); + mask |= exprListTableUsage(pMaskSet, pS->pGroupBy); + mask |= exprListTableUsage(pMaskSet, pS->pOrderBy); + mask |= exprTableUsage(pMaskSet, pS->pWhere); + mask |= exprTableUsage(pMaskSet, pS->pHaving); + if( ALWAYS(pSrc!=0) ){ + int i; + for(i=0; inSrc; i++){ + mask |= exprSelectTableUsage(pMaskSet, pSrc->a[i].pSelect); + mask |= exprTableUsage(pMaskSet, pSrc->a[i].pOn); + } + } + pS = pS->pPrior; + } + return mask; } -#endif /* -** Parse context structure pFrom has just been used to create a sub-vdbe -** (trigger program). If an error has occurred, transfer error information -** from pFrom to pTo. +** Return TRUE if the given operator is one of the operators that is +** allowed for an indexable WHERE clause term. The allowed operators are +** "=", "<", ">", "<=", ">=", "IN", and "IS NULL" */ -static void transferParseError(Parse *pTo, Parse *pFrom){ - assert( pFrom->zErrMsg==0 || pFrom->nErr ); - assert( pTo->zErrMsg==0 || pTo->nErr ); - if( pTo->nErr==0 ){ - pTo->zErrMsg = pFrom->zErrMsg; - pTo->nErr = pFrom->nErr; - }else{ - sqlite3DbFree(pFrom->db, pFrom->zErrMsg); - } +static int allowedOp(int op){ + assert( TK_GT>TK_EQ && TK_GTTK_EQ && TK_LTTK_EQ && TK_LE=TK_EQ && op<=TK_GE) || op==TK_ISNULL; } /* -** Create and populate a new TriggerPrg object with a sub-program -** implementing trigger pTrigger with ON CONFLICT policy orconf. +** Commute a comparison operator. Expressions of the form "X op Y" +** are converted into "Y op X". +** +** If left/right precedence rules come into play when determining the +** collating sequence, then COLLATE operators are adjusted to ensure +** that the collating sequence does not change. For example: +** "Y collate NOCASE op X" becomes "X op Y" because any collation sequence on +** the left hand side of a comparison overrides any collation sequence +** attached to the right. For the same reason the EP_Collate flag +** is not commuted. */ -static TriggerPrg *codeRowTrigger( - Parse *pParse, /* Current parse context */ - Trigger *pTrigger, /* Trigger to code */ - Table *pTab, /* The table pTrigger is attached to */ - int orconf /* ON CONFLICT policy to code trigger program with */ -){ - Parse *pTop = sqlite3ParseToplevel(pParse); - sqlite3 *db = pParse->db; /* Database handle */ - TriggerPrg *pPrg; /* Value to return */ - Expr *pWhen = 0; /* Duplicate of trigger WHEN expression */ - Vdbe *v; /* Temporary VM */ - NameContext sNC; /* Name context for sub-vdbe */ - SubProgram *pProgram = 0; /* Sub-vdbe for trigger program */ - Parse *pSubParse; /* Parse context for sub-vdbe */ - int iEndTrigger = 0; /* Label to jump to if WHEN is false */ - - assert( pTrigger->zName==0 || pTab==tableOfTrigger(pTrigger) ); - assert( pTop->pVdbe ); - - /* Allocate the TriggerPrg and SubProgram objects. To ensure that they - ** are freed if an error occurs, link them into the Parse.pTriggerPrg - ** list of the top-level Parse object sooner rather than later. */ - pPrg = sqlite3DbMallocZero(db, sizeof(TriggerPrg)); - if( !pPrg ) return 0; - pPrg->pNext = pTop->pTriggerPrg; - pTop->pTriggerPrg = pPrg; - pPrg->pProgram = pProgram = sqlite3DbMallocZero(db, sizeof(SubProgram)); - if( !pProgram ) return 0; - sqlite3VdbeLinkSubProgram(pTop->pVdbe, pProgram); - pPrg->pTrigger = pTrigger; - pPrg->orconf = orconf; - pPrg->aColmask[0] = 0xffffffff; - pPrg->aColmask[1] = 0xffffffff; - - /* Allocate and populate a new Parse context to use for coding the - ** trigger sub-program. */ - pSubParse = sqlite3StackAllocZero(db, sizeof(Parse)); - if( !pSubParse ) return 0; - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pSubParse; - pSubParse->db = db; - pSubParse->pTriggerTab = pTab; - pSubParse->pToplevel = pTop; - pSubParse->zAuthContext = pTrigger->zName; - pSubParse->eTriggerOp = pTrigger->op; - pSubParse->nQueryLoop = pParse->nQueryLoop; - - v = sqlite3GetVdbe(pSubParse); - if( v ){ - VdbeComment((v, "Start: %s.%s (%s %s%s%s ON %s)", - pTrigger->zName, onErrorText(orconf), - (pTrigger->tr_tm==TRIGGER_BEFORE ? "BEFORE" : "AFTER"), - (pTrigger->op==TK_UPDATE ? "UPDATE" : ""), - (pTrigger->op==TK_INSERT ? "INSERT" : ""), - (pTrigger->op==TK_DELETE ? "DELETE" : ""), - pTab->zName - )); -#ifndef SQLITE_OMIT_TRACE - sqlite3VdbeChangeP4(v, -1, - sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC - ); -#endif - - /* If one was specified, code the WHEN clause. If it evaluates to false - ** (or NULL) the sub-vdbe is immediately halted by jumping to the - ** OP_Halt inserted at the end of the program. */ - if( pTrigger->pWhen ){ - pWhen = sqlite3ExprDup(db, pTrigger->pWhen, 0); - if( SQLITE_OK==sqlite3ResolveExprNames(&sNC, pWhen) - && db->mallocFailed==0 - ){ - iEndTrigger = sqlite3VdbeMakeLabel(v); - sqlite3ExprIfFalse(pSubParse, pWhen, iEndTrigger, SQLITE_JUMPIFNULL); - } - sqlite3ExprDelete(db, pWhen); - } - - /* Code the trigger program into the sub-vdbe. */ - codeTriggerProgram(pSubParse, pTrigger->step_list, orconf); - - /* Insert an OP_Halt at the end of the sub-program. */ - if( iEndTrigger ){ - sqlite3VdbeResolveLabel(v, iEndTrigger); - } - sqlite3VdbeAddOp0(v, OP_Halt); - VdbeComment((v, "End: %s.%s", pTrigger->zName, onErrorText(orconf))); - - transferParseError(pParse, pSubParse); - if( db->mallocFailed==0 ){ - pProgram->aOp = sqlite3VdbeTakeOpArray(v, &pProgram->nOp, &pTop->nMaxArg); +static void exprCommute(Parse *pParse, Expr *pExpr){ + u16 expRight = (pExpr->pRight->flags & EP_Collate); + u16 expLeft = (pExpr->pLeft->flags & EP_Collate); + assert( allowedOp(pExpr->op) && pExpr->op!=TK_IN ); + if( expRight==expLeft ){ + /* Either X and Y both have COLLATE operator or neither do */ + if( expRight ){ + /* Both X and Y have COLLATE operators. Make sure X is always + ** used by clearing the EP_Collate flag from Y. */ + pExpr->pRight->flags &= ~EP_Collate; + }else if( sqlite3ExprCollSeq(pParse, pExpr->pLeft)!=0 ){ + /* Neither X nor Y have COLLATE operators, but X has a non-default + ** collating sequence. So add the EP_Collate marker on X to cause + ** it to be searched first. */ + pExpr->pLeft->flags |= EP_Collate; } - pProgram->nMem = pSubParse->nMem; - pProgram->nCsr = pSubParse->nTab; - pProgram->token = (void *)pTrigger; - pPrg->aColmask[0] = pSubParse->oldmask; - pPrg->aColmask[1] = pSubParse->newmask; - sqlite3VdbeDelete(v); } - - assert( !pSubParse->pAinc && !pSubParse->pZombieTab ); - assert( !pSubParse->pTriggerPrg && !pSubParse->nMaxArg ); - sqlite3StackFree(db, pSubParse); - - return pPrg; + SWAP(Expr*,pExpr->pRight,pExpr->pLeft); + if( pExpr->op>=TK_GT ){ + assert( TK_LT==TK_GT+2 ); + assert( TK_GE==TK_LE+2 ); + assert( TK_GT>TK_EQ ); + assert( TK_GTop>=TK_GT && pExpr->op<=TK_GE ); + pExpr->op = ((pExpr->op-TK_GT)^2)+TK_GT; + } } - + /* -** Return a pointer to a TriggerPrg object containing the sub-program for -** trigger pTrigger with default ON CONFLICT algorithm orconf. If no such -** TriggerPrg object exists, a new object is allocated and populated before -** being returned. +** Translate from TK_xx operator to WO_xx bitmask. */ -static TriggerPrg *getRowTrigger( - Parse *pParse, /* Current parse context */ - Trigger *pTrigger, /* Trigger to code */ - Table *pTab, /* The table trigger pTrigger is attached to */ - int orconf /* ON CONFLICT algorithm. */ -){ - Parse *pRoot = sqlite3ParseToplevel(pParse); - TriggerPrg *pPrg; - - assert( pTrigger->zName==0 || pTab==tableOfTrigger(pTrigger) ); - - /* It may be that this trigger has already been coded (or is in the - ** process of being coded). If this is the case, then an entry with - ** a matching TriggerPrg.pTrigger field will be present somewhere - ** in the Parse.pTriggerPrg list. Search for such an entry. */ - for(pPrg=pRoot->pTriggerPrg; - pPrg && (pPrg->pTrigger!=pTrigger || pPrg->orconf!=orconf); - pPrg=pPrg->pNext - ); - - /* If an existing TriggerPrg could not be located, create a new one. */ - if( !pPrg ){ - pPrg = codeRowTrigger(pParse, pTrigger, pTab, orconf); +static u16 operatorMask(int op){ + u16 c; + assert( allowedOp(op) ); + if( op==TK_IN ){ + c = WO_IN; + }else if( op==TK_ISNULL ){ + c = WO_ISNULL; + }else{ + assert( (WO_EQ<<(op-TK_EQ)) < 0x7fff ); + c = (u16)(WO_EQ<<(op-TK_EQ)); } - - return pPrg; + assert( op!=TK_ISNULL || c==WO_ISNULL ); + assert( op!=TK_IN || c==WO_IN ); + assert( op!=TK_EQ || c==WO_EQ ); + assert( op!=TK_LT || c==WO_LT ); + assert( op!=TK_LE || c==WO_LE ); + assert( op!=TK_GT || c==WO_GT ); + assert( op!=TK_GE || c==WO_GE ); + return c; } /* -** Generate code for the trigger program associated with trigger p on -** table pTab. The reg, orconf and ignoreJump parameters passed to this -** function are the same as those described in the header function for -** sqlite3CodeRowTrigger() +** Advance to the next WhereTerm that matches according to the criteria +** established when the pScan object was initialized by whereScanInit(). +** Return NULL if there are no more matching WhereTerms. */ -SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect( - Parse *pParse, /* Parse context */ - Trigger *p, /* Trigger to code */ - Table *pTab, /* The table to code triggers from */ - int reg, /* Reg array containing OLD.* and NEW.* values */ - int orconf, /* ON CONFLICT policy */ - int ignoreJump /* Instruction to jump to for RAISE(IGNORE) */ -){ - Vdbe *v = sqlite3GetVdbe(pParse); /* Main VM */ - TriggerPrg *pPrg; - pPrg = getRowTrigger(pParse, p, pTab, orconf); - assert( pPrg || pParse->nErr || pParse->db->mallocFailed ); - - /* Code the OP_Program opcode in the parent VDBE. P4 of the OP_Program - ** is a pointer to the sub-vdbe containing the trigger program. */ - if( pPrg ){ - int bRecursive = (p->zName && 0==(pParse->db->flags&SQLITE_RecTriggers)); - - sqlite3VdbeAddOp3(v, OP_Program, reg, ignoreJump, ++pParse->nMem); - sqlite3VdbeChangeP4(v, -1, (const char *)pPrg->pProgram, P4_SUBPROGRAM); - VdbeComment( - (v, "Call: %s.%s", (p->zName?p->zName:"fkey"), onErrorText(orconf))); +static WhereTerm *whereScanNext(WhereScan *pScan){ + int iCur; /* The cursor on the LHS of the term */ + int iColumn; /* The column on the LHS of the term. -1 for IPK */ + Expr *pX; /* An expression being tested */ + WhereClause *pWC; /* Shorthand for pScan->pWC */ + WhereTerm *pTerm; /* The term being tested */ + int k = pScan->k; /* Where to start scanning */ - /* Set the P5 operand of the OP_Program instruction to non-zero if - ** recursive invocation of this trigger program is disallowed. Recursive - ** invocation is disallowed if (a) the sub-program is really a trigger, - ** not a foreign key action, and (b) the flag to enable recursive triggers - ** is clear. */ - sqlite3VdbeChangeP5(v, (u8)bRecursive); + while( pScan->iEquiv<=pScan->nEquiv ){ + iCur = pScan->aEquiv[pScan->iEquiv-2]; + iColumn = pScan->aEquiv[pScan->iEquiv-1]; + while( (pWC = pScan->pWC)!=0 ){ + for(pTerm=pWC->a+k; knTerm; k++, pTerm++){ + if( pTerm->leftCursor==iCur + && pTerm->u.leftColumn==iColumn + && (pScan->iEquiv<=2 || !ExprHasProperty(pTerm->pExpr, EP_FromJoin)) + ){ + if( (pTerm->eOperator & WO_EQUIV)!=0 + && pScan->nEquivaEquiv) + ){ + int j; + pX = sqlite3ExprSkipCollate(pTerm->pExpr->pRight); + assert( pX->op==TK_COLUMN ); + for(j=0; jnEquiv; j+=2){ + if( pScan->aEquiv[j]==pX->iTable + && pScan->aEquiv[j+1]==pX->iColumn ){ + break; + } + } + if( j==pScan->nEquiv ){ + pScan->aEquiv[j] = pX->iTable; + pScan->aEquiv[j+1] = pX->iColumn; + pScan->nEquiv += 2; + } + } + if( (pTerm->eOperator & pScan->opMask)!=0 ){ + /* Verify the affinity and collating sequence match */ + if( pScan->zCollName && (pTerm->eOperator & WO_ISNULL)==0 ){ + CollSeq *pColl; + Parse *pParse = pWC->pWInfo->pParse; + pX = pTerm->pExpr; + if( !sqlite3IndexAffinityOk(pX, pScan->idxaff) ){ + continue; + } + assert(pX->pLeft); + pColl = sqlite3BinaryCompareCollSeq(pParse, + pX->pLeft, pX->pRight); + if( pColl==0 ) pColl = pParse->db->pDfltColl; + if( sqlite3StrICmp(pColl->zName, pScan->zCollName) ){ + continue; + } + } + if( (pTerm->eOperator & WO_EQ)!=0 + && (pX = pTerm->pExpr->pRight)->op==TK_COLUMN + && pX->iTable==pScan->aEquiv[0] + && pX->iColumn==pScan->aEquiv[1] + ){ + continue; + } + pScan->k = k+1; + return pTerm; + } + } + } + pScan->pWC = pScan->pWC->pOuter; + k = 0; + } + pScan->pWC = pScan->pOrigWC; + k = 0; + pScan->iEquiv += 2; } + return 0; } /* -** This is called to code the required FOR EACH ROW triggers for an operation -** on table pTab. The operation to code triggers for (INSERT, UPDATE or DELETE) -** is given by the op paramater. The tr_tm parameter determines whether the -** BEFORE or AFTER triggers are coded. If the operation is an UPDATE, then -** parameter pChanges is passed the list of columns being modified. -** -** If there are no triggers that fire at the specified time for the specified -** operation on pTab, this function is a no-op. -** -** The reg argument is the address of the first in an array of registers -** that contain the values substituted for the new.* and old.* references -** in the trigger program. If N is the number of columns in table pTab -** (a copy of pTab->nCol), then registers are populated as follows: +** Initialize a WHERE clause scanner object. Return a pointer to the +** first match. Return NULL if there are no matches. ** -** Register Contains -** ------------------------------------------------------ -** reg+0 OLD.rowid -** reg+1 OLD.* value of left-most column of pTab -** ... ... -** reg+N OLD.* value of right-most column of pTab -** reg+N+1 NEW.rowid -** reg+N+2 OLD.* value of left-most column of pTab -** ... ... -** reg+N+N+1 NEW.* value of right-most column of pTab +** The scanner will be searching the WHERE clause pWC. It will look +** for terms of the form "X " where X is column iColumn of table +** iCur. The must be one of the operators described by opMask. ** -** For ON DELETE triggers, the registers containing the NEW.* values will -** never be accessed by the trigger program, so they are not allocated or -** populated by the caller (there is no data to populate them with anyway). -** Similarly, for ON INSERT triggers the values stored in the OLD.* registers -** are never accessed, and so are not allocated by the caller. So, for an -** ON INSERT trigger, the value passed to this function as parameter reg -** is not a readable register, although registers (reg+N) through -** (reg+N+N+1) are. +** If the search is for X and the WHERE clause contains terms of the +** form X=Y then this routine might also return terms of the form +** "Y ". The number of levels of transitivity is limited, +** but is enough to handle most commonly occurring SQL statements. ** -** Parameter orconf is the default conflict resolution algorithm for the -** trigger program to use (REPLACE, IGNORE etc.). Parameter ignoreJump -** is the instruction that control should jump to if a trigger program -** raises an IGNORE exception. +** If X is not the INTEGER PRIMARY KEY then X must be compatible with +** index pIdx. */ -SQLITE_PRIVATE void sqlite3CodeRowTrigger( - Parse *pParse, /* Parse context */ - Trigger *pTrigger, /* List of triggers on table pTab */ - int op, /* One of TK_UPDATE, TK_INSERT, TK_DELETE */ - ExprList *pChanges, /* Changes list for any UPDATE OF triggers */ - int tr_tm, /* One of TRIGGER_BEFORE, TRIGGER_AFTER */ - Table *pTab, /* The table to code triggers from */ - int reg, /* The first in an array of registers (see above) */ - int orconf, /* ON CONFLICT policy */ - int ignoreJump /* Instruction to jump to for RAISE(IGNORE) */ +static WhereTerm *whereScanInit( + WhereScan *pScan, /* The WhereScan object being initialized */ + WhereClause *pWC, /* The WHERE clause to be scanned */ + int iCur, /* Cursor to scan for */ + int iColumn, /* Column to scan for */ + u32 opMask, /* Operator(s) to scan for */ + Index *pIdx /* Must be compatible with this index */ ){ - Trigger *p; /* Used to iterate through pTrigger list */ - - assert( op==TK_UPDATE || op==TK_INSERT || op==TK_DELETE ); - assert( tr_tm==TRIGGER_BEFORE || tr_tm==TRIGGER_AFTER ); - assert( (op==TK_UPDATE)==(pChanges!=0) ); - - for(p=pTrigger; p; p=p->pNext){ - - /* Sanity checking: The schema for the trigger and for the table are - ** always defined. The trigger must be in the same schema as the table - ** or else it must be a TEMP trigger. */ - assert( p->pSchema!=0 ); - assert( p->pTabSchema!=0 ); - assert( p->pSchema==p->pTabSchema - || p->pSchema==pParse->db->aDb[1].pSchema ); + int j; - /* Determine whether we should code this trigger */ - if( p->op==op - && p->tr_tm==tr_tm - && checkColumnOverlap(p->pColumns, pChanges) - ){ - sqlite3CodeRowTriggerDirect(pParse, p, pTab, reg, orconf, ignoreJump); + /* memset(pScan, 0, sizeof(*pScan)); */ + pScan->pOrigWC = pWC; + pScan->pWC = pWC; + if( pIdx && iColumn>=0 ){ + pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity; + for(j=0; pIdx->aiColumn[j]!=iColumn; j++){ + if( NEVER(j>pIdx->nColumn) ) return 0; } + pScan->zCollName = pIdx->azColl[j]; + }else{ + pScan->idxaff = 0; + pScan->zCollName = 0; } + pScan->opMask = opMask; + pScan->k = 0; + pScan->aEquiv[0] = iCur; + pScan->aEquiv[1] = iColumn; + pScan->nEquiv = 2; + pScan->iEquiv = 2; + return whereScanNext(pScan); } /* -** Triggers may access values stored in the old.* or new.* pseudo-table. -** This function returns a 32-bit bitmask indicating which columns of the -** old.* or new.* tables actually are used by triggers. This information -** may be used by the caller, for example, to avoid having to load the entire -** old.* record into memory when executing an UPDATE or DELETE command. -** -** Bit 0 of the returned mask is set if the left-most column of the -** table may be accessed using an [old|new].reference. Bit 1 is set if -** the second leftmost column value is required, and so on. If there -** are more than 32 columns in the table, and at least one of the columns -** with an index greater than 32 may be accessed, 0xffffffff is returned. -** -** It is not possible to determine if the old.rowid or new.rowid column is -** accessed by triggers. The caller must always assume that it is. -** -** Parameter isNew must be either 1 or 0. If it is 0, then the mask returned -** applies to the old.* table. If 1, the new.* table. +** Search for a term in the WHERE clause that is of the form "X " +** where X is a reference to the iColumn of table iCur and is one of +** the WO_xx operator codes specified by the op parameter. +** Return a pointer to the term. Return 0 if not found. ** -** Parameter tr_tm must be a mask with one or both of the TRIGGER_BEFORE -** and TRIGGER_AFTER bits set. Values accessed by BEFORE triggers are only -** included in the returned mask if the TRIGGER_BEFORE bit is set in the -** tr_tm parameter. Similarly, values accessed by AFTER triggers are only -** included in the returned mask if the TRIGGER_AFTER bit is set in tr_tm. +** The term returned might by Y= if there is another constraint in +** the WHERE clause that specifies that X=Y. Any such constraints will be +** identified by the WO_EQUIV bit in the pTerm->eOperator field. The +** aEquiv[] array holds X and all its equivalents, with each SQL variable +** taking up two slots in aEquiv[]. The first slot is for the cursor number +** and the second is for the column number. There are 22 slots in aEquiv[] +** so that means we can look for X plus up to 10 other equivalent values. +** Hence a search for X will return if X=A1 and A1=A2 and A2=A3 +** and ... and A9=A10 and A10=. +** +** If there are multiple terms in the WHERE clause of the form "X " +** then try for the one with no dependencies on - in other words where +** is a constant expression of some kind. Only return entries of +** the form "X Y" where Y is a column in another table if no terms of +** the form "X " exist. If no terms with a constant RHS +** exist, try to return a term that does not use WO_EQUIV. */ -SQLITE_PRIVATE u32 sqlite3TriggerColmask( - Parse *pParse, /* Parse context */ - Trigger *pTrigger, /* List of triggers on table pTab */ - ExprList *pChanges, /* Changes list for any UPDATE OF triggers */ - int isNew, /* 1 for new.* ref mask, 0 for old.* ref mask */ - int tr_tm, /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ - Table *pTab, /* The table to code triggers from */ - int orconf /* Default ON CONFLICT policy for trigger steps */ +static WhereTerm *findTerm( + WhereClause *pWC, /* The WHERE clause to be searched */ + int iCur, /* Cursor number of LHS */ + int iColumn, /* Column number of LHS */ + Bitmask notReady, /* RHS must not overlap with this mask */ + u32 op, /* Mask of WO_xx values describing operator */ + Index *pIdx /* Must be compatible with this index, if not NULL */ ){ - const int op = pChanges ? TK_UPDATE : TK_DELETE; - u32 mask = 0; - Trigger *p; + WhereTerm *pResult = 0; + WhereTerm *p; + WhereScan scan; - assert( isNew==1 || isNew==0 ); - for(p=pTrigger; p; p=p->pNext){ - if( p->op==op && (tr_tm&p->tr_tm) - && checkColumnOverlap(p->pColumns,pChanges) - ){ - TriggerPrg *pPrg; - pPrg = getRowTrigger(pParse, p, pTab, orconf); - if( pPrg ){ - mask |= pPrg->aColmask[isNew]; + p = whereScanInit(&scan, pWC, iCur, iColumn, op, pIdx); + while( p ){ + if( (p->prereqRight & notReady)==0 ){ + if( p->prereqRight==0 && (p->eOperator&WO_EQ)!=0 ){ + return p; } + if( pResult==0 ) pResult = p; } + p = whereScanNext(&scan); } - - return mask; + return pResult; } -#endif /* !defined(SQLITE_OMIT_TRIGGER) */ +/* Forward reference */ +static void exprAnalyze(SrcList*, WhereClause*, int); -/************** End of trigger.c *********************************************/ -/************** Begin file update.c ******************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This file contains C code routines that are called by the parser -** to handle UPDATE statements. +** Call exprAnalyze on all terms in a WHERE clause. */ +static void exprAnalyzeAll( + SrcList *pTabList, /* the FROM clause */ + WhereClause *pWC /* the WHERE clause to be analyzed */ +){ + int i; + for(i=pWC->nTerm-1; i>=0; i--){ + exprAnalyze(pTabList, pWC, i); + } +} -#ifndef SQLITE_OMIT_VIRTUALTABLE -/* Forward declaration */ -static void updateVirtualTable( - Parse *pParse, /* The parsing context */ - SrcList *pSrc, /* The virtual table to be modified */ - Table *pTab, /* The virtual table */ - ExprList *pChanges, /* The columns to change in the UPDATE statement */ - Expr *pRowidExpr, /* Expression used to recompute the rowid */ - int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ - Expr *pWhere, /* WHERE clause of the UPDATE statement */ - int onError /* ON CONFLICT strategy */ -); -#endif /* SQLITE_OMIT_VIRTUALTABLE */ - +#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION /* -** The most recently coded instruction was an OP_Column to retrieve the -** i-th column of table pTab. This routine sets the P4 parameter of the -** OP_Column to the default value, if any. -** -** The default value of a column is specified by a DEFAULT clause in the -** column definition. This was either supplied by the user when the table -** was created, or added later to the table definition by an ALTER TABLE -** command. If the latter, then the row-records in the table btree on disk -** may not contain a value for the column and the default value, taken -** from the P4 parameter of the OP_Column instruction, is returned instead. -** If the former, then all row-records are guaranteed to include a value -** for the column and the P4 value is not required. -** -** Column definitions created by an ALTER TABLE command may only have -** literal default values specified: a number, null or a string. (If a more -** complicated default expression value was provided, it is evaluated -** when the ALTER TABLE is executed and one of the literal values written -** into the sqlite_master table.) -** -** Therefore, the P4 parameter is only required if the default value for -** the column is a literal number, string or null. The sqlite3ValueFromExpr() -** function is capable of transforming these types of expressions into -** sqlite3_value objects. +** Check to see if the given expression is a LIKE or GLOB operator that +** can be optimized using inequality constraints. Return TRUE if it is +** so and false if not. ** -** If parameter iReg is not negative, code an OP_RealAffinity instruction -** on register iReg. This is used when an equivalent integer value is -** stored in place of an 8-byte floating point value in order to save -** space. +** In order for the operator to be optimizible, the RHS must be a string +** literal that does not begin with a wildcard. */ -SQLITE_PRIVATE void sqlite3ColumnDefault(Vdbe *v, Table *pTab, int i, int iReg){ - assert( pTab!=0 ); - if( !pTab->pSelect ){ - sqlite3_value *pValue; - u8 enc = ENC(sqlite3VdbeDb(v)); - Column *pCol = &pTab->aCol[i]; - VdbeComment((v, "%s.%s", pTab->zName, pCol->zName)); - assert( inCol ); - sqlite3ValueFromExpr(sqlite3VdbeDb(v), pCol->pDflt, enc, - pCol->affinity, &pValue); - if( pValue ){ - sqlite3VdbeChangeP4(v, -1, (const char *)pValue, P4_MEM); +static int isLikeOrGlob( + Parse *pParse, /* Parsing and code generating context */ + Expr *pExpr, /* Test this expression */ + Expr **ppPrefix, /* Pointer to TK_STRING expression with pattern prefix */ + int *pisComplete, /* True if the only wildcard is % in the last character */ + int *pnoCase /* True if uppercase is equivalent to lowercase */ +){ + const char *z = 0; /* String on RHS of LIKE operator */ + Expr *pRight, *pLeft; /* Right and left size of LIKE operator */ + ExprList *pList; /* List of operands to the LIKE operator */ + int c; /* One character in z[] */ + int cnt; /* Number of non-wildcard prefix characters */ + char wc[3]; /* Wildcard characters */ + sqlite3 *db = pParse->db; /* Database connection */ + sqlite3_value *pVal = 0; + int op; /* Opcode of pRight */ + + if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, wc) ){ + return 0; + } +#ifdef SQLITE_EBCDIC + if( *pnoCase ) return 0; +#endif + pList = pExpr->x.pList; + pLeft = pList->a[1].pExpr; + if( pLeft->op!=TK_COLUMN + || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT + || IsVirtual(pLeft->pTab) + ){ + /* IMP: R-02065-49465 The left-hand side of the LIKE or GLOB operator must + ** be the name of an indexed column with TEXT affinity. */ + return 0; + } + assert( pLeft->iColumn!=(-1) ); /* Because IPK never has AFF_TEXT */ + + pRight = sqlite3ExprSkipCollate(pList->a[0].pExpr); + op = pRight->op; + if( op==TK_VARIABLE ){ + Vdbe *pReprepare = pParse->pReprepare; + int iCol = pRight->iColumn; + pVal = sqlite3VdbeGetBoundValue(pReprepare, iCol, SQLITE_AFF_NONE); + if( pVal && sqlite3_value_type(pVal)==SQLITE_TEXT ){ + z = (char *)sqlite3_value_text(pVal); } -#ifndef SQLITE_OMIT_FLOATING_POINT - if( iReg>=0 && pTab->aCol[i].affinity==SQLITE_AFF_REAL ){ - sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg); + sqlite3VdbeSetVarmask(pParse->pVdbe, iCol); + assert( pRight->op==TK_VARIABLE || pRight->op==TK_REGISTER ); + }else if( op==TK_STRING ){ + z = pRight->u.zToken; + } + if( z ){ + cnt = 0; + while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){ + cnt++; + } + if( cnt!=0 && 255!=(u8)z[cnt-1] ){ + Expr *pPrefix; + *pisComplete = c==wc[0] && z[cnt+1]==0; + pPrefix = sqlite3Expr(db, TK_STRING, z); + if( pPrefix ) pPrefix->u.zToken[cnt] = 0; + *ppPrefix = pPrefix; + if( op==TK_VARIABLE ){ + Vdbe *v = pParse->pVdbe; + sqlite3VdbeSetVarmask(v, pRight->iColumn); + if( *pisComplete && pRight->u.zToken[1] ){ + /* If the rhs of the LIKE expression is a variable, and the current + ** value of the variable means there is no need to invoke the LIKE + ** function, then no OP_Variable will be added to the program. + ** This causes problems for the sqlite3_bind_parameter_name() + ** API. To work around them, add a dummy OP_Variable here. + */ + int r1 = sqlite3GetTempReg(pParse); + sqlite3ExprCodeTarget(pParse, pRight, r1); + sqlite3VdbeChangeP3(v, sqlite3VdbeCurrentAddr(v)-1, 0); + sqlite3ReleaseTempReg(pParse, r1); + } + } + }else{ + z = 0; } -#endif } + + sqlite3ValueFree(pVal); + return (z!=0); } +#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ + +#ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Process an UPDATE statement. +** Check to see if the given expression is of the form ** -** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL; -** \_______/ \________/ \______/ \________________/ -* onError pTabList pChanges pWhere +** column MATCH expr +** +** If it is then return TRUE. If not, return FALSE. */ -SQLITE_PRIVATE void sqlite3Update( - Parse *pParse, /* The parser context */ - SrcList *pTabList, /* The table in which we should change things */ - ExprList *pChanges, /* Things to be changed */ - Expr *pWhere, /* The WHERE clause. May be null */ - int onError /* How to handle constraint errors */ +static int isMatchOfColumn( + Expr *pExpr /* Test this expression */ ){ - int i, j; /* Loop counters */ - Table *pTab; /* The table to be updated */ - int addr = 0; /* VDBE instruction address of the start of the loop */ - WhereInfo *pWInfo; /* Information about the WHERE clause */ - Vdbe *v; /* The virtual database engine */ - Index *pIdx; /* For looping over indices */ - int nIdx; /* Number of indices that need updating */ - int iCur; /* VDBE Cursor number of pTab */ - sqlite3 *db; /* The database structure */ - int *aRegIdx = 0; /* One register assigned to each index to be updated */ - int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the - ** an expression for the i-th column of the table. - ** aXRef[i]==-1 if the i-th column is not changed. */ - int chngRowid; /* True if the record number is being changed */ - Expr *pRowidExpr = 0; /* Expression defining the new record number */ - int openAll = 0; /* True if all indices need to be opened */ - AuthContext sContext; /* The authorization context */ - NameContext sNC; /* The name-context to resolve expressions in */ - int iDb; /* Database containing the table being updated */ - int okOnePass; /* True for one-pass algorithm without the FIFO */ - int hasFK; /* True if foreign key processing is required */ - -#ifndef SQLITE_OMIT_TRIGGER - int isView; /* True when updating a view (INSTEAD OF trigger) */ - Trigger *pTrigger; /* List of triggers on pTab, if required */ - int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ -#endif - int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */ - - /* Register Allocations */ - int regRowCount = 0; /* A count of rows changed */ - int regOldRowid; /* The old rowid */ - int regNewRowid; /* The new rowid */ - int regNew; - int regOld = 0; - int regRowSet = 0; /* Rowset of rows to be updated */ + ExprList *pList; - memset(&sContext, 0, sizeof(sContext)); - db = pParse->db; - if( pParse->nErr || db->mallocFailed ){ - goto update_cleanup; + if( pExpr->op!=TK_FUNCTION ){ + return 0; } - assert( pTabList->nSrc==1 ); - - /* Locate the table which we want to update. - */ - pTab = sqlite3SrcListLookup(pParse, pTabList); - if( pTab==0 ) goto update_cleanup; - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - - /* Figure out if we have any triggers and if the table being - ** updated is a view. - */ -#ifndef SQLITE_OMIT_TRIGGER - pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask); - isView = pTab->pSelect!=0; - assert( pTrigger || tmask==0 ); -#else -# define pTrigger 0 -# define isView 0 -# define tmask 0 -#endif -#ifdef SQLITE_OMIT_VIEW -# undef isView -# define isView 0 -#endif - - if( sqlite3ViewGetColumnNames(pParse, pTab) ){ - goto update_cleanup; + if( sqlite3StrICmp(pExpr->u.zToken,"match")!=0 ){ + return 0; } - if( sqlite3IsReadOnly(pParse, pTab, tmask) ){ - goto update_cleanup; + pList = pExpr->x.pList; + if( pList->nExpr!=2 ){ + return 0; } - aXRef = sqlite3DbMallocRaw(db, sizeof(int) * pTab->nCol ); - if( aXRef==0 ) goto update_cleanup; - for(i=0; inCol; i++) aXRef[i] = -1; + if( pList->a[1].pExpr->op != TK_COLUMN ){ + return 0; + } + return 1; +} +#endif /* SQLITE_OMIT_VIRTUALTABLE */ - /* Allocate a cursors for the main database table and for all indices. - ** The index cursors might not be used, but if they are used they - ** need to occur right after the database cursor. So go ahead and - ** allocate enough space, just in case. - */ - pTabList->a[0].iCursor = iCur = pParse->nTab++; - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - pParse->nTab++; +/* +** If the pBase expression originated in the ON or USING clause of +** a join, then transfer the appropriate markings over to derived. +*/ +static void transferJoinMarkings(Expr *pDerived, Expr *pBase){ + if( pDerived ){ + pDerived->flags |= pBase->flags & EP_FromJoin; + pDerived->iRightJoinTable = pBase->iRightJoinTable; } +} - /* Initialize the name-context */ - memset(&sNC, 0, sizeof(sNC)); - sNC.pParse = pParse; - sNC.pSrcList = pTabList; +#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY) +/* +** Analyze a term that consists of two or more OR-connected +** subterms. So in: +** +** ... WHERE (a=5) AND (b=7 OR c=9 OR d=13) AND (d=13) +** ^^^^^^^^^^^^^^^^^^^^ +** +** This routine analyzes terms such as the middle term in the above example. +** A WhereOrTerm object is computed and attached to the term under +** analysis, regardless of the outcome of the analysis. Hence: +** +** WhereTerm.wtFlags |= TERM_ORINFO +** WhereTerm.u.pOrInfo = a dynamically allocated WhereOrTerm object +** +** The term being analyzed must have two or more of OR-connected subterms. +** A single subterm might be a set of AND-connected sub-subterms. +** Examples of terms under analysis: +** +** (A) t1.x=t2.y OR t1.x=t2.z OR t1.y=15 OR t1.z=t3.a+5 +** (B) x=expr1 OR expr2=x OR x=expr3 +** (C) t1.x=t2.y OR (t1.x=t2.z AND t1.y=15) +** (D) x=expr1 OR (y>11 AND y<22 AND z LIKE '*hello*') +** (E) (p.a=1 AND q.b=2 AND r.c=3) OR (p.x=4 AND q.y=5 AND r.z=6) +** +** CASE 1: +** +** If all subterms are of the form T.C=expr for some single column of C and +** a single table T (as shown in example B above) then create a new virtual +** term that is an equivalent IN expression. In other words, if the term +** being analyzed is: +** +** x = expr1 OR expr2 = x OR x = expr3 +** +** then create a new virtual term like this: +** +** x IN (expr1,expr2,expr3) +** +** CASE 2: +** +** If all subterms are indexable by a single table T, then set +** +** WhereTerm.eOperator = WO_OR +** WhereTerm.u.pOrInfo->indexable |= the cursor number for table T +** +** A subterm is "indexable" if it is of the form +** "T.C " where C is any column of table T and +** is one of "=", "<", "<=", ">", ">=", "IS NULL", or "IN". +** A subterm is also indexable if it is an AND of two or more +** subsubterms at least one of which is indexable. Indexable AND +** subterms have their eOperator set to WO_AND and they have +** u.pAndInfo set to a dynamically allocated WhereAndTerm object. +** +** From another point of view, "indexable" means that the subterm could +** potentially be used with an index if an appropriate index exists. +** This analysis does not consider whether or not the index exists; that +** is decided elsewhere. This analysis only looks at whether subterms +** appropriate for indexing exist. +** +** All examples A through E above satisfy case 2. But if a term +** also satisfies case 1 (such as B) we know that the optimizer will +** always prefer case 1, so in that case we pretend that case 2 is not +** satisfied. +** +** It might be the case that multiple tables are indexable. For example, +** (E) above is indexable on tables P, Q, and R. +** +** Terms that satisfy case 2 are candidates for lookup by using +** separate indices to find rowids for each subterm and composing +** the union of all rowids using a RowSet object. This is similar +** to "bitmap indices" in other database engines. +** +** OTHERWISE: +** +** If neither case 1 nor case 2 apply, then leave the eOperator set to +** zero. This term is not useful for search. +*/ +static void exprAnalyzeOrTerm( + SrcList *pSrc, /* the FROM clause */ + WhereClause *pWC, /* the complete WHERE clause */ + int idxTerm /* Index of the OR-term to be analyzed */ +){ + WhereInfo *pWInfo = pWC->pWInfo; /* WHERE clause processing context */ + Parse *pParse = pWInfo->pParse; /* Parser context */ + sqlite3 *db = pParse->db; /* Database connection */ + WhereTerm *pTerm = &pWC->a[idxTerm]; /* The term to be analyzed */ + Expr *pExpr = pTerm->pExpr; /* The expression of the term */ + int i; /* Loop counters */ + WhereClause *pOrWc; /* Breakup of pTerm into subterms */ + WhereTerm *pOrTerm; /* A Sub-term within the pOrWc */ + WhereOrInfo *pOrInfo; /* Additional information associated with pTerm */ + Bitmask chngToIN; /* Tables that might satisfy case 1 */ + Bitmask indexable; /* Tables that are indexable, satisfying case 2 */ - /* Resolve the column names in all the expressions of the - ** of the UPDATE statement. Also find the column index - ** for each column to be updated in the pChanges array. For each - ** column to be updated, make sure we have authorization to change - ** that column. + /* + ** Break the OR clause into its separate subterms. The subterms are + ** stored in a WhereClause structure containing within the WhereOrInfo + ** object that is attached to the original OR clause term. */ - chngRowid = 0; - for(i=0; inExpr; i++){ - if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){ - goto update_cleanup; - } - for(j=0; jnCol; j++){ - if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){ - if( j==pTab->iPKey ){ - chngRowid = 1; - pRowidExpr = pChanges->a[i].pExpr; + assert( (pTerm->wtFlags & (TERM_DYNAMIC|TERM_ORINFO|TERM_ANDINFO))==0 ); + assert( pExpr->op==TK_OR ); + pTerm->u.pOrInfo = pOrInfo = sqlite3DbMallocZero(db, sizeof(*pOrInfo)); + if( pOrInfo==0 ) return; + pTerm->wtFlags |= TERM_ORINFO; + pOrWc = &pOrInfo->wc; + whereClauseInit(pOrWc, pWInfo); + whereSplit(pOrWc, pExpr, TK_OR); + exprAnalyzeAll(pSrc, pOrWc); + if( db->mallocFailed ) return; + assert( pOrWc->nTerm>=2 ); + + /* + ** Compute the set of tables that might satisfy cases 1 or 2. + */ + indexable = ~(Bitmask)0; + chngToIN = ~(Bitmask)0; + for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0 && indexable; i--, pOrTerm++){ + if( (pOrTerm->eOperator & WO_SINGLE)==0 ){ + WhereAndInfo *pAndInfo; + assert( (pOrTerm->wtFlags & (TERM_ANDINFO|TERM_ORINFO))==0 ); + chngToIN = 0; + pAndInfo = sqlite3DbMallocRaw(db, sizeof(*pAndInfo)); + if( pAndInfo ){ + WhereClause *pAndWC; + WhereTerm *pAndTerm; + int j; + Bitmask b = 0; + pOrTerm->u.pAndInfo = pAndInfo; + pOrTerm->wtFlags |= TERM_ANDINFO; + pOrTerm->eOperator = WO_AND; + pAndWC = &pAndInfo->wc; + whereClauseInit(pAndWC, pWC->pWInfo); + whereSplit(pAndWC, pOrTerm->pExpr, TK_AND); + exprAnalyzeAll(pSrc, pAndWC); + pAndWC->pOuter = pWC; + testcase( db->mallocFailed ); + if( !db->mallocFailed ){ + for(j=0, pAndTerm=pAndWC->a; jnTerm; j++, pAndTerm++){ + assert( pAndTerm->pExpr ); + if( allowedOp(pAndTerm->pExpr->op) ){ + b |= getMask(&pWInfo->sMaskSet, pAndTerm->leftCursor); + } + } } - aXRef[j] = i; - break; + indexable &= b; } - } - if( j>=pTab->nCol ){ - if( sqlite3IsRowid(pChanges->a[i].zName) ){ - chngRowid = 1; - pRowidExpr = pChanges->a[i].pExpr; - }else{ - sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName); - pParse->checkSchema = 1; - goto update_cleanup; + }else if( pOrTerm->wtFlags & TERM_COPIED ){ + /* Skip this term for now. We revisit it when we process the + ** corresponding TERM_VIRTUAL term */ + }else{ + Bitmask b; + b = getMask(&pWInfo->sMaskSet, pOrTerm->leftCursor); + if( pOrTerm->wtFlags & TERM_VIRTUAL ){ + WhereTerm *pOther = &pOrWc->a[pOrTerm->iParent]; + b |= getMask(&pWInfo->sMaskSet, pOther->leftCursor); } - } -#ifndef SQLITE_OMIT_AUTHORIZATION - { - int rc; - rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName, - pTab->aCol[j].zName, db->aDb[iDb].zName); - if( rc==SQLITE_DENY ){ - goto update_cleanup; - }else if( rc==SQLITE_IGNORE ){ - aXRef[j] = -1; + indexable &= b; + if( (pOrTerm->eOperator & WO_EQ)==0 ){ + chngToIN = 0; + }else{ + chngToIN &= b; } } -#endif } - hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngRowid); + /* + ** Record the set of tables that satisfy case 2. The set might be + ** empty. + */ + pOrInfo->indexable = indexable; + pTerm->eOperator = indexable==0 ? 0 : WO_OR; - /* Allocate memory for the array aRegIdx[]. There is one entry in the - ** array for each index associated with table being updated. Fill in - ** the value with a register number for indices that are to be used - ** and with zero for unused indices. + /* + ** chngToIN holds a set of tables that *might* satisfy case 1. But + ** we have to do some additional checking to see if case 1 really + ** is satisfied. + ** + ** chngToIN will hold either 0, 1, or 2 bits. The 0-bit case means + ** that there is no possibility of transforming the OR clause into an + ** IN operator because one or more terms in the OR clause contain + ** something other than == on a column in the single table. The 1-bit + ** case means that every term of the OR clause is of the form + ** "table.column=expr" for some single table. The one bit that is set + ** will correspond to the common table. We still need to check to make + ** sure the same column is used on all terms. The 2-bit case is when + ** the all terms are of the form "table1.column=table2.column". It + ** might be possible to form an IN operator with either table1.column + ** or table2.column as the LHS if either is common to every term of + ** the OR clause. + ** + ** Note that terms of the form "table.column1=table.column2" (the + ** same table on both sizes of the ==) cannot be optimized. */ - for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){} - if( nIdx>0 ){ - aRegIdx = sqlite3DbMallocRaw(db, sizeof(Index*) * nIdx ); - if( aRegIdx==0 ) goto update_cleanup; - } - for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - int reg; - if( hasFK || chngRowid ){ - reg = ++pParse->nMem; - }else{ - reg = 0; - for(i=0; inColumn; i++){ - if( aXRef[pIdx->aiColumn[i]]>=0 ){ - reg = ++pParse->nMem; - break; + if( chngToIN ){ + int okToChngToIN = 0; /* True if the conversion to IN is valid */ + int iColumn = -1; /* Column index on lhs of IN operator */ + int iCursor = -1; /* Table cursor common to all terms */ + int j = 0; /* Loop counter */ + + /* Search for a table and column that appears on one side or the + ** other of the == operator in every subterm. That table and column + ** will be recorded in iCursor and iColumn. There might not be any + ** such table and column. Set okToChngToIN if an appropriate table + ** and column is found but leave okToChngToIN false if not found. + */ + for(j=0; j<2 && !okToChngToIN; j++){ + pOrTerm = pOrWc->a; + for(i=pOrWc->nTerm-1; i>=0; i--, pOrTerm++){ + assert( pOrTerm->eOperator & WO_EQ ); + pOrTerm->wtFlags &= ~TERM_OR_OK; + if( pOrTerm->leftCursor==iCursor ){ + /* This is the 2-bit case and we are on the second iteration and + ** current term is from the first iteration. So skip this term. */ + assert( j==1 ); + continue; + } + if( (chngToIN & getMask(&pWInfo->sMaskSet, pOrTerm->leftCursor))==0 ){ + /* This term must be of the form t1.a==t2.b where t2 is in the + ** chngToIN set but t1 is not. This term will be either preceded + ** or follwed by an inverted copy (t2.b==t1.a). Skip this term + ** and use its inversion. */ + testcase( pOrTerm->wtFlags & TERM_COPIED ); + testcase( pOrTerm->wtFlags & TERM_VIRTUAL ); + assert( pOrTerm->wtFlags & (TERM_COPIED|TERM_VIRTUAL) ); + continue; } + iColumn = pOrTerm->u.leftColumn; + iCursor = pOrTerm->leftCursor; + break; } - } - aRegIdx[j] = reg; - } - - /* Begin generating code. */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto update_cleanup; - if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); - -#ifndef SQLITE_OMIT_VIRTUALTABLE - /* Virtual tables must be handled separately */ - if( IsVirtual(pTab) ){ - updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef, - pWhere, onError); - pWhere = 0; - pTabList = 0; - goto update_cleanup; - } -#endif - - /* Allocate required registers. */ - regOldRowid = regNewRowid = ++pParse->nMem; - if( pTrigger || hasFK ){ - regOld = pParse->nMem + 1; - pParse->nMem += pTab->nCol; - } - if( chngRowid || pTrigger || hasFK ){ - regNewRowid = ++pParse->nMem; - } - regNew = pParse->nMem + 1; - pParse->nMem += pTab->nCol; - - /* Start the view context. */ - if( isView ){ - sqlite3AuthContextPush(pParse, &sContext, pTab->zName); - } - - /* If we are trying to update a view, realize that view into - ** a ephemeral table. - */ -#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) - if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iCur); - } -#endif + if( i<0 ){ + /* No candidate table+column was found. This can only occur + ** on the second iteration */ + assert( j==1 ); + assert( IsPowerOfTwo(chngToIN) ); + assert( chngToIN==getMask(&pWInfo->sMaskSet, iCursor) ); + break; + } + testcase( j==1 ); - /* Resolve the column names in all the expressions in the - ** WHERE clause. - */ - if( sqlite3ResolveExprNames(&sNC, pWhere) ){ - goto update_cleanup; - } + /* We have found a candidate table and column. Check to see if that + ** table and column is common to every term in the OR clause */ + okToChngToIN = 1; + for(; i>=0 && okToChngToIN; i--, pOrTerm++){ + assert( pOrTerm->eOperator & WO_EQ ); + if( pOrTerm->leftCursor!=iCursor ){ + pOrTerm->wtFlags &= ~TERM_OR_OK; + }else if( pOrTerm->u.leftColumn!=iColumn ){ + okToChngToIN = 0; + }else{ + int affLeft, affRight; + /* If the right-hand side is also a column, then the affinities + ** of both right and left sides must be such that no type + ** conversions are required on the right. (Ticket #2249) + */ + affRight = sqlite3ExprAffinity(pOrTerm->pExpr->pRight); + affLeft = sqlite3ExprAffinity(pOrTerm->pExpr->pLeft); + if( affRight!=0 && affRight!=affLeft ){ + okToChngToIN = 0; + }else{ + pOrTerm->wtFlags |= TERM_OR_OK; + } + } + } + } - /* Begin the database scan - */ - sqlite3VdbeAddOp2(v, OP_Null, 0, regOldRowid); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere,0, WHERE_ONEPASS_DESIRED); - if( pWInfo==0 ) goto update_cleanup; - okOnePass = pWInfo->okOnePass; + /* At this point, okToChngToIN is true if original pTerm satisfies + ** case 1. In that case, construct a new virtual term that is + ** pTerm converted into an IN operator. + */ + if( okToChngToIN ){ + Expr *pDup; /* A transient duplicate expression */ + ExprList *pList = 0; /* The RHS of the IN operator */ + Expr *pLeft = 0; /* The LHS of the IN operator */ + Expr *pNew; /* The complete IN operator */ - /* Remember the rowid of every item to be updated. - */ - sqlite3VdbeAddOp2(v, OP_Rowid, iCur, regOldRowid); - if( !okOnePass ){ - regRowSet = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid); + for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0; i--, pOrTerm++){ + if( (pOrTerm->wtFlags & TERM_OR_OK)==0 ) continue; + assert( pOrTerm->eOperator & WO_EQ ); + assert( pOrTerm->leftCursor==iCursor ); + assert( pOrTerm->u.leftColumn==iColumn ); + pDup = sqlite3ExprDup(db, pOrTerm->pExpr->pRight, 0); + pList = sqlite3ExprListAppend(pWInfo->pParse, pList, pDup); + pLeft = pOrTerm->pExpr->pLeft; + } + assert( pLeft!=0 ); + pDup = sqlite3ExprDup(db, pLeft, 0); + pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0, 0); + if( pNew ){ + int idxNew; + transferJoinMarkings(pNew, pExpr); + assert( !ExprHasProperty(pNew, EP_xIsSelect) ); + pNew->x.pList = pList; + idxNew = whereClauseInsert(pWC, pNew, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew==0 ); + exprAnalyze(pSrc, pWC, idxNew); + pTerm = &pWC->a[idxTerm]; + pWC->a[idxNew].iParent = idxTerm; + pTerm->nChild = 1; + }else{ + sqlite3ExprListDelete(db, pList); + } + pTerm->eOperator = WO_NOOP; /* case 1 trumps case 2 */ + } } +} +#endif /* !SQLITE_OMIT_OR_OPTIMIZATION && !SQLITE_OMIT_SUBQUERY */ - /* End the database scan loop. - */ - sqlite3WhereEnd(pWInfo); +/* +** The input to this routine is an WhereTerm structure with only the +** "pExpr" field filled in. The job of this routine is to analyze the +** subexpression and populate all the other fields of the WhereTerm +** structure. +** +** If the expression is of the form " X" it gets commuted +** to the standard form of "X ". +** +** If the expression is of the form "X Y" where both X and Y are +** columns, then the original expression is unchanged and a new virtual +** term of the form "Y X" is added to the WHERE clause and +** analyzed separately. The original term is marked with TERM_COPIED +** and the new term is marked with TERM_DYNAMIC (because it's pExpr +** needs to be freed with the WhereClause) and TERM_VIRTUAL (because it +** is a commuted copy of a prior term.) The original term has nChild=1 +** and the copy has idxParent set to the index of the original term. +*/ +static void exprAnalyze( + SrcList *pSrc, /* the FROM clause */ + WhereClause *pWC, /* the WHERE clause */ + int idxTerm /* Index of the term to be analyzed */ +){ + WhereInfo *pWInfo = pWC->pWInfo; /* WHERE clause processing context */ + WhereTerm *pTerm; /* The term to be analyzed */ + WhereMaskSet *pMaskSet; /* Set of table index masks */ + Expr *pExpr; /* The expression to be analyzed */ + Bitmask prereqLeft; /* Prerequesites of the pExpr->pLeft */ + Bitmask prereqAll; /* Prerequesites of pExpr */ + Bitmask extraRight = 0; /* Extra dependencies on LEFT JOIN */ + Expr *pStr1 = 0; /* RHS of LIKE/GLOB operator */ + int isComplete = 0; /* RHS of LIKE/GLOB ends with wildcard */ + int noCase = 0; /* LIKE/GLOB distinguishes case */ + int op; /* Top-level operator. pExpr->op */ + Parse *pParse = pWInfo->pParse; /* Parsing context */ + sqlite3 *db = pParse->db; /* Database connection */ - /* Initialize the count of updated rows - */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){ - regRowCount = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); + if( db->mallocFailed ){ + return; } - - if( !isView ){ - /* - ** Open every index that needs updating. Note that if any - ** index could potentially invoke a REPLACE conflict resolution - ** action, then we need to open all indices because we might need - ** to be deleting some records. - */ - if( !okOnePass ) sqlite3OpenTable(pParse, iCur, iDb, pTab, OP_OpenWrite); - if( onError==OE_Replace ){ - openAll = 1; + pTerm = &pWC->a[idxTerm]; + pMaskSet = &pWInfo->sMaskSet; + pExpr = pTerm->pExpr; + assert( pExpr->op!=TK_AS && pExpr->op!=TK_COLLATE ); + prereqLeft = exprTableUsage(pMaskSet, pExpr->pLeft); + op = pExpr->op; + if( op==TK_IN ){ + assert( pExpr->pRight==0 ); + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + pTerm->prereqRight = exprSelectTableUsage(pMaskSet, pExpr->x.pSelect); }else{ - openAll = 0; - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->onError==OE_Replace ){ - openAll = 1; - break; - } - } - } - for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ - if( openAll || aRegIdx[i]>0 ){ - KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIdx); - sqlite3VdbeAddOp4(v, OP_OpenWrite, iCur+i+1, pIdx->tnum, iDb, - (char*)pKey, P4_KEYINFO_HANDOFF); - assert( pParse->nTab>iCur+i+1 ); - } + pTerm->prereqRight = exprListTableUsage(pMaskSet, pExpr->x.pList); } - } - - /* Top of the update loop */ - if( okOnePass ){ - int a1 = sqlite3VdbeAddOp1(v, OP_NotNull, regOldRowid); - addr = sqlite3VdbeAddOp0(v, OP_Goto); - sqlite3VdbeJumpHere(v, a1); + }else if( op==TK_ISNULL ){ + pTerm->prereqRight = 0; }else{ - addr = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, 0, regOldRowid); + pTerm->prereqRight = exprTableUsage(pMaskSet, pExpr->pRight); } - - /* Make cursor iCur point to the record that is being updated. If - ** this record does not exist for some reason (deleted by a trigger, - ** for example, then jump to the next iteration of the RowSet loop. */ - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid); - - /* If the record number will change, set register regNewRowid to - ** contain the new value. If the record number is not being modified, - ** then regNewRowid is the same register as regOldRowid, which is - ** already populated. */ - assert( chngRowid || pTrigger || hasFK || regOldRowid==regNewRowid ); - if( chngRowid ){ - sqlite3ExprCode(pParse, pRowidExpr, regNewRowid); - sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); + prereqAll = exprTableUsage(pMaskSet, pExpr); + if( ExprHasProperty(pExpr, EP_FromJoin) ){ + Bitmask x = getMask(pMaskSet, pExpr->iRightJoinTable); + prereqAll |= x; + extraRight = x-1; /* ON clause terms may not be used with an index + ** on left table of a LEFT JOIN. Ticket #3015 */ } - - /* If there are triggers on this table, populate an array of registers - ** with the required old.* column data. */ - if( hasFK || pTrigger ){ - u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0); - oldmask |= sqlite3TriggerColmask(pParse, - pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError - ); - for(i=0; inCol; i++){ - if( aXRef[i]<0 || oldmask==0xffffffff || (i<32 && (oldmask & (1<prereqAll = prereqAll; + pTerm->leftCursor = -1; + pTerm->iParent = -1; + pTerm->eOperator = 0; + if( allowedOp(op) ){ + Expr *pLeft = sqlite3ExprSkipCollate(pExpr->pLeft); + Expr *pRight = sqlite3ExprSkipCollate(pExpr->pRight); + u16 opMask = (pTerm->prereqRight & prereqLeft)==0 ? WO_ALL : WO_EQUIV; + if( pLeft->op==TK_COLUMN ){ + pTerm->leftCursor = pLeft->iTable; + pTerm->u.leftColumn = pLeft->iColumn; + pTerm->eOperator = operatorMask(op) & opMask; + } + if( pRight && pRight->op==TK_COLUMN ){ + WhereTerm *pNew; + Expr *pDup; + u16 eExtraOp = 0; /* Extra bits for pNew->eOperator */ + if( pTerm->leftCursor>=0 ){ + int idxNew; + pDup = sqlite3ExprDup(db, pExpr, 0); + if( db->mallocFailed ){ + sqlite3ExprDelete(db, pDup); + return; + } + idxNew = whereClauseInsert(pWC, pDup, TERM_VIRTUAL|TERM_DYNAMIC); + if( idxNew==0 ) return; + pNew = &pWC->a[idxNew]; + pNew->iParent = idxTerm; + pTerm = &pWC->a[idxTerm]; + pTerm->nChild = 1; + pTerm->wtFlags |= TERM_COPIED; + if( pExpr->op==TK_EQ + && !ExprHasProperty(pExpr, EP_FromJoin) + && OptimizationEnabled(db, SQLITE_Transitive) + ){ + pTerm->eOperator |= WO_EQUIV; + eExtraOp = WO_EQUIV; + } }else{ - sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i); + pDup = pExpr; + pNew = pTerm; } - } - if( chngRowid==0 ){ - sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid); + exprCommute(pParse, pDup); + pLeft = sqlite3ExprSkipCollate(pDup->pLeft); + pNew->leftCursor = pLeft->iTable; + pNew->u.leftColumn = pLeft->iColumn; + testcase( (prereqLeft | extraRight) != prereqLeft ); + pNew->prereqRight = prereqLeft | extraRight; + pNew->prereqAll = prereqAll; + pNew->eOperator = (operatorMask(pDup->op) + eExtraOp) & opMask; } } - /* Populate the array of registers beginning at regNew with the new - ** row data. This array is used to check constaints, create the new - ** table and index records, and as the values for any new.* references - ** made by triggers. +#ifndef SQLITE_OMIT_BETWEEN_OPTIMIZATION + /* If a term is the BETWEEN operator, create two new virtual terms + ** that define the range that the BETWEEN implements. For example: ** - ** If there are one or more BEFORE triggers, then do not populate the - ** registers associated with columns that are (a) not modified by - ** this UPDATE statement and (b) not accessed by new.* references. The - ** values for registers not modified by the UPDATE must be reloaded from - ** the database after the BEFORE triggers are fired anyway (as the trigger - ** may have modified them). So not loading those that are not going to - ** be used eliminates some redundant opcodes. + ** a BETWEEN b AND c + ** + ** is converted into: + ** + ** (a BETWEEN b AND c) AND (a>=b) AND (a<=c) + ** + ** The two new terms are added onto the end of the WhereClause object. + ** The new terms are "dynamic" and are children of the original BETWEEN + ** term. That means that if the BETWEEN term is coded, the children are + ** skipped. Or, if the children are satisfied by an index, the original + ** BETWEEN term is skipped. */ - newmask = sqlite3TriggerColmask( - pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError - ); - for(i=0; inCol; i++){ - if( i==pTab->iPKey ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); - }else{ - j = aXRef[i]; - if( j>=0 ){ - sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i); - }else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask&(1<op==TK_BETWEEN && pWC->op==TK_AND ){ + ExprList *pList = pExpr->x.pList; + int i; + static const u8 ops[] = {TK_GE, TK_LE}; + assert( pList!=0 ); + assert( pList->nExpr==2 ); + for(i=0; i<2; i++){ + Expr *pNewExpr; + int idxNew; + pNewExpr = sqlite3PExpr(pParse, ops[i], + sqlite3ExprDup(db, pExpr->pLeft, 0), + sqlite3ExprDup(db, pList->a[i].pExpr, 0), 0); + transferJoinMarkings(pNewExpr, pExpr); + idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew==0 ); + exprAnalyze(pSrc, pWC, idxNew); + pTerm = &pWC->a[idxTerm]; + pWC->a[idxNew].iParent = idxTerm; } + pTerm->nChild = 2; } +#endif /* SQLITE_OMIT_BETWEEN_OPTIMIZATION */ - /* Fire any BEFORE UPDATE triggers. This happens before constraints are - ** verified. One could argue that this is wrong. +#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY) + /* Analyze a term that is composed of two or more subterms connected by + ** an OR operator. */ - if( tmask&TRIGGER_BEFORE ){ - sqlite3VdbeAddOp2(v, OP_Affinity, regNew, pTab->nCol); - sqlite3TableAffinityStr(v, pTab); - sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, - TRIGGER_BEFORE, pTab, regOldRowid, onError, addr); - - /* The row-trigger may have deleted the row being updated. In this - ** case, jump to the next row. No updates or AFTER triggers are - ** required. This behaviour - what happens when the row being updated - ** is deleted or renamed by a BEFORE trigger - is left undefined in the - ** documentation. - */ - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addr, regOldRowid); - - /* If it did not delete it, the row-trigger may still have modified - ** some of the columns of the row being updated. Load the values for - ** all columns not modified by the update statement into their - ** registers in case this has happened. - */ - for(i=0; inCol; i++){ - if( aXRef[i]<0 && i!=pTab->iPKey ){ - sqlite3VdbeAddOp3(v, OP_Column, iCur, i, regNew+i); - sqlite3ColumnDefault(v, pTab, i, regNew+i); - } - } + else if( pExpr->op==TK_OR ){ + assert( pWC->op==TK_AND ); + exprAnalyzeOrTerm(pSrc, pWC, idxTerm); + pTerm = &pWC->a[idxTerm]; } +#endif /* SQLITE_OMIT_OR_OPTIMIZATION */ - if( !isView ){ - int j1; /* Address of jump instruction */ - - /* Do constraint checks. */ - sqlite3GenerateConstraintChecks(pParse, pTab, iCur, regNewRowid, - aRegIdx, (chngRowid?regOldRowid:0), 1, onError, addr, 0); +#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION + /* Add constraints to reduce the search space on a LIKE or GLOB + ** operator. + ** + ** A like pattern of the form "x LIKE 'abc%'" is changed into constraints + ** + ** x>='abc' AND x<'abd' AND x LIKE 'abc%' + ** + ** The last character of the prefix "abc" is incremented to form the + ** termination condition "abd". + */ + if( pWC->op==TK_AND + && isLikeOrGlob(pParse, pExpr, &pStr1, &isComplete, &noCase) + ){ + Expr *pLeft; /* LHS of LIKE/GLOB operator */ + Expr *pStr2; /* Copy of pStr1 - RHS of LIKE/GLOB operator */ + Expr *pNewExpr1; + Expr *pNewExpr2; + int idxNew1; + int idxNew2; + Token sCollSeqName; /* Name of collating sequence */ - /* Do FK constraint checks. */ - if( hasFK ){ - sqlite3FkCheck(pParse, pTab, regOldRowid, 0); + pLeft = pExpr->x.pList->a[1].pExpr; + pStr2 = sqlite3ExprDup(db, pStr1, 0); + if( !db->mallocFailed ){ + u8 c, *pC; /* Last character before the first wildcard */ + pC = (u8*)&pStr2->u.zToken[sqlite3Strlen30(pStr2->u.zToken)-1]; + c = *pC; + if( noCase ){ + /* The point is to increment the last character before the first + ** wildcard. But if we increment '@', that will push it into the + ** alphabetic range where case conversions will mess up the + ** inequality. To avoid this, make sure to also run the full + ** LIKE on all candidate expressions by clearing the isComplete flag + */ + if( c=='A'-1 ) isComplete = 0; + c = sqlite3UpperToLower[c]; + } + *pC = c + 1; } - - /* Delete the index entries associated with the current record. */ - j1 = sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, regOldRowid); - sqlite3GenerateRowIndexDelete(pParse, pTab, iCur, aRegIdx); - - /* If changing the record number, delete the old record. */ - if( hasFK || chngRowid ){ - sqlite3VdbeAddOp2(v, OP_Delete, iCur, 0); + sCollSeqName.z = noCase ? "NOCASE" : "BINARY"; + sCollSeqName.n = 6; + pNewExpr1 = sqlite3ExprDup(db, pLeft, 0); + pNewExpr1 = sqlite3PExpr(pParse, TK_GE, + sqlite3ExprAddCollateToken(pParse,pNewExpr1,&sCollSeqName), + pStr1, 0); + transferJoinMarkings(pNewExpr1, pExpr); + idxNew1 = whereClauseInsert(pWC, pNewExpr1, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew1==0 ); + exprAnalyze(pSrc, pWC, idxNew1); + pNewExpr2 = sqlite3ExprDup(db, pLeft, 0); + pNewExpr2 = sqlite3PExpr(pParse, TK_LT, + sqlite3ExprAddCollateToken(pParse,pNewExpr2,&sCollSeqName), + pStr2, 0); + transferJoinMarkings(pNewExpr2, pExpr); + idxNew2 = whereClauseInsert(pWC, pNewExpr2, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew2==0 ); + exprAnalyze(pSrc, pWC, idxNew2); + pTerm = &pWC->a[idxTerm]; + if( isComplete ){ + pWC->a[idxNew1].iParent = idxTerm; + pWC->a[idxNew2].iParent = idxTerm; + pTerm->nChild = 2; } - sqlite3VdbeJumpHere(v, j1); + } +#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ - if( hasFK ){ - sqlite3FkCheck(pParse, pTab, 0, regNewRowid); - } - - /* Insert the new index entries and the new record. */ - sqlite3CompleteInsertion(pParse, pTab, iCur, regNewRowid, aRegIdx, 1, 0, 0); +#ifndef SQLITE_OMIT_VIRTUALTABLE + /* Add a WO_MATCH auxiliary term to the constraint set if the + ** current expression is of the form: column MATCH expr. + ** This information is used by the xBestIndex methods of + ** virtual tables. The native query optimizer does not attempt + ** to do anything with MATCH functions. + */ + if( isMatchOfColumn(pExpr) ){ + int idxNew; + Expr *pRight, *pLeft; + WhereTerm *pNewTerm; + Bitmask prereqColumn, prereqExpr; - /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to - ** handle rows (possibly in other tables) that refer via a foreign key - ** to the row just updated. */ - if( hasFK ){ - sqlite3FkActions(pParse, pTab, pChanges, regOldRowid); + pRight = pExpr->x.pList->a[0].pExpr; + pLeft = pExpr->x.pList->a[1].pExpr; + prereqExpr = exprTableUsage(pMaskSet, pRight); + prereqColumn = exprTableUsage(pMaskSet, pLeft); + if( (prereqExpr & prereqColumn)==0 ){ + Expr *pNewExpr; + pNewExpr = sqlite3PExpr(pParse, TK_MATCH, + 0, sqlite3ExprDup(db, pRight, 0), 0); + idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew==0 ); + pNewTerm = &pWC->a[idxNew]; + pNewTerm->prereqRight = prereqExpr; + pNewTerm->leftCursor = pLeft->iTable; + pNewTerm->u.leftColumn = pLeft->iColumn; + pNewTerm->eOperator = WO_MATCH; + pNewTerm->iParent = idxTerm; + pTerm = &pWC->a[idxTerm]; + pTerm->nChild = 1; + pTerm->wtFlags |= TERM_COPIED; + pNewTerm->prereqAll = pTerm->prereqAll; } } +#endif /* SQLITE_OMIT_VIRTUALTABLE */ - /* Increment the row counter +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + /* When sqlite_stat3 histogram data is available an operator of the + ** form "x IS NOT NULL" can sometimes be evaluated more efficiently + ** as "x>NULL" if x is not an INTEGER PRIMARY KEY. So construct a + ** virtual term of that form. + ** + ** Note that the virtual term must be tagged with TERM_VNULL. This + ** TERM_VNULL tag will suppress the not-null check at the beginning + ** of the loop. Without the TERM_VNULL flag, the not-null check at + ** the start of the loop will prevent any results from being returned. */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){ - sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); - } - - sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, - TRIGGER_AFTER, pTab, regOldRowid, onError, addr); + if( pExpr->op==TK_NOTNULL + && pExpr->pLeft->op==TK_COLUMN + && pExpr->pLeft->iColumn>=0 + && OptimizationEnabled(db, SQLITE_Stat3) + ){ + Expr *pNewExpr; + Expr *pLeft = pExpr->pLeft; + int idxNew; + WhereTerm *pNewTerm; - /* Repeat the above with the next record to be updated, until - ** all record selected by the WHERE clause have been updated. - */ - sqlite3VdbeAddOp2(v, OP_Goto, 0, addr); - sqlite3VdbeJumpHere(v, addr); + pNewExpr = sqlite3PExpr(pParse, TK_GT, + sqlite3ExprDup(db, pLeft, 0), + sqlite3PExpr(pParse, TK_NULL, 0, 0, 0), 0); - /* Close all tables */ - for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ - if( openAll || aRegIdx[i]>0 ){ - sqlite3VdbeAddOp2(v, OP_Close, iCur+i+1, 0); + idxNew = whereClauseInsert(pWC, pNewExpr, + TERM_VIRTUAL|TERM_DYNAMIC|TERM_VNULL); + if( idxNew ){ + pNewTerm = &pWC->a[idxNew]; + pNewTerm->prereqRight = 0; + pNewTerm->leftCursor = pLeft->iTable; + pNewTerm->u.leftColumn = pLeft->iColumn; + pNewTerm->eOperator = WO_GT; + pNewTerm->iParent = idxTerm; + pTerm = &pWC->a[idxTerm]; + pTerm->nChild = 1; + pTerm->wtFlags |= TERM_COPIED; + pNewTerm->prereqAll = pTerm->prereqAll; } } - sqlite3VdbeAddOp2(v, OP_Close, iCur, 0); - - /* Update the sqlite_sequence table by storing the content of the - ** maximum rowid counter values recorded while inserting into - ** autoincrement tables. - */ - if( pParse->nested==0 && pParse->pTriggerTab==0 ){ - sqlite3AutoincrementEnd(pParse); - } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ - /* - ** Return the number of rows that were changed. If this routine is - ** generating code because of a call to sqlite3NestedParse(), do not - ** invoke the callback function. + /* Prevent ON clause terms of a LEFT JOIN from being used to drive + ** an index for tables to the left of the join. */ - if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){ - sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC); - } - -update_cleanup: - sqlite3AuthContextPop(&sContext); - sqlite3DbFree(db, aRegIdx); - sqlite3DbFree(db, aXRef); - sqlite3SrcListDelete(db, pTabList); - sqlite3ExprListDelete(db, pChanges); - sqlite3ExprDelete(db, pWhere); - return; + pTerm->prereqRight |= extraRight; } -/* Make sure "isView" and other macros defined above are undefined. Otherwise -** thely may interfere with compilation of other functions in this file -** (or in another file, if this file becomes part of the amalgamation). */ -#ifdef isView - #undef isView -#endif -#ifdef pTrigger - #undef pTrigger -#endif -#ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Generate code for an UPDATE of a virtual table. -** -** The strategy is that we create an ephemerial table that contains -** for each row to be changed: -** -** (A) The original rowid of that row. -** (B) The revised rowid for the row. (note1) -** (C) The content of every column in the row. -** -** Then we loop over this ephemeral table and for each row in -** the ephermeral table call VUpdate. -** -** When finished, drop the ephemeral table. +** This function searches pList for an entry that matches the iCol-th column +** of index pIdx. ** -** (note1) Actually, if we know in advance that (A) is always the same -** as (B) we only store (A), then duplicate (A) when pulling -** it out of the ephemeral table before calling VUpdate. +** If such an expression is found, its index in pList->a[] is returned. If +** no expression is found, -1 is returned. */ -static void updateVirtualTable( - Parse *pParse, /* The parsing context */ - SrcList *pSrc, /* The virtual table to be modified */ - Table *pTab, /* The virtual table */ - ExprList *pChanges, /* The columns to change in the UPDATE statement */ - Expr *pRowid, /* Expression used to recompute the rowid */ - int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ - Expr *pWhere, /* WHERE clause of the UPDATE statement */ - int onError /* ON CONFLICT strategy */ +static int findIndexCol( + Parse *pParse, /* Parse context */ + ExprList *pList, /* Expression list to search */ + int iBase, /* Cursor for table associated with pIdx */ + Index *pIdx, /* Index to match column of */ + int iCol /* Column of index to match */ ){ - Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */ - ExprList *pEList = 0; /* The result set of the SELECT statement */ - Select *pSelect = 0; /* The SELECT statement */ - Expr *pExpr; /* Temporary expression */ - int ephemTab; /* Table holding the result of the SELECT */ - int i; /* Loop counter */ - int addr; /* Address of top of loop */ - int iReg; /* First register in set passed to OP_VUpdate */ - sqlite3 *db = pParse->db; /* Database connection */ - const char *pVTab = (const char*)sqlite3GetVTable(db, pTab); - SelectDest dest; + int i; + const char *zColl = pIdx->azColl[iCol]; - /* Construct the SELECT statement that will find the new values for - ** all updated rows. - */ - pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, "_rowid_")); - if( pRowid ){ - pEList = sqlite3ExprListAppend(pParse, pEList, - sqlite3ExprDup(db, pRowid, 0)); - } - assert( pTab->iPKey<0 ); - for(i=0; inCol; i++){ - if( aXRef[i]>=0 ){ - pExpr = sqlite3ExprDup(db, pChanges->a[aXRef[i]].pExpr, 0); - }else{ - pExpr = sqlite3Expr(db, TK_ID, pTab->aCol[i].zName); + for(i=0; inExpr; i++){ + Expr *p = sqlite3ExprSkipCollate(pList->a[i].pExpr); + if( p->op==TK_COLUMN + && p->iColumn==pIdx->aiColumn[iCol] + && p->iTable==iBase + ){ + CollSeq *pColl = sqlite3ExprCollSeq(pParse, pList->a[i].pExpr); + if( ALWAYS(pColl) && 0==sqlite3StrICmp(pColl->zName, zColl) ){ + return i; + } } - pEList = sqlite3ExprListAppend(pParse, pEList, pExpr); - } - pSelect = sqlite3SelectNew(pParse, pEList, pSrc, pWhere, 0, 0, 0, 0, 0, 0); - - /* Create the ephemeral table into which the update results will - ** be stored. - */ - assert( v ); - ephemTab = pParse->nTab++; - sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, pTab->nCol+1+(pRowid!=0)); - sqlite3VdbeChangeP5(v, BTREE_UNORDERED); - - /* fill the ephemeral table - */ - sqlite3SelectDestInit(&dest, SRT_Table, ephemTab); - sqlite3Select(pParse, pSelect, &dest); - - /* Generate code to scan the ephemeral table and call VUpdate. */ - iReg = ++pParse->nMem; - pParse->nMem += pTab->nCol+1; - addr = sqlite3VdbeAddOp2(v, OP_Rewind, ephemTab, 0); - sqlite3VdbeAddOp3(v, OP_Column, ephemTab, 0, iReg); - sqlite3VdbeAddOp3(v, OP_Column, ephemTab, (pRowid?1:0), iReg+1); - for(i=0; inCol; i++){ - sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i+1+(pRowid!=0), iReg+2+i); } - sqlite3VtabMakeWritable(pParse, pTab); - sqlite3VdbeAddOp4(v, OP_VUpdate, 0, pTab->nCol+2, iReg, pVTab, P4_VTAB); - sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError); - sqlite3MayAbort(pParse); - sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); - sqlite3VdbeJumpHere(v, addr); - sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0); - /* Cleanup */ - sqlite3SelectDelete(db, pSelect); + return -1; } -#endif /* SQLITE_OMIT_VIRTUALTABLE */ -/************** End of update.c **********************************************/ -/************** Begin file vacuum.c ******************************************/ /* -** 2003 April 6 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** Return true if the DISTINCT expression-list passed as the third argument +** is redundant. ** -************************************************************************* -** This file contains code used to implement the VACUUM command. -** -** Most of the code in this file may be omitted by defining the -** SQLITE_OMIT_VACUUM macro. +** A DISTINCT list is redundant if the database contains some subset of +** columns that are unique and non-null. */ +static int isDistinctRedundant( + Parse *pParse, /* Parsing context */ + SrcList *pTabList, /* The FROM clause */ + WhereClause *pWC, /* The WHERE clause */ + ExprList *pDistinct /* The result set that needs to be DISTINCT */ +){ + Table *pTab; + Index *pIdx; + int i; + int iBase; -#if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH) -/* -** Finalize a prepared statement. If there was an error, store the -** text of the error message in *pzErrMsg. Return the result code. -*/ -static int vacuumFinalize(sqlite3 *db, sqlite3_stmt *pStmt, char **pzErrMsg){ - int rc; - rc = sqlite3VdbeFinalize((Vdbe*)pStmt); - if( rc ){ - sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db)); + /* If there is more than one table or sub-select in the FROM clause of + ** this query, then it will not be possible to show that the DISTINCT + ** clause is redundant. */ + if( pTabList->nSrc!=1 ) return 0; + iBase = pTabList->a[0].iCursor; + pTab = pTabList->a[0].pTab; + + /* If any of the expressions is an IPK column on table iBase, then return + ** true. Note: The (p->iTable==iBase) part of this test may be false if the + ** current SELECT is a correlated sub-query. + */ + for(i=0; inExpr; i++){ + Expr *p = sqlite3ExprSkipCollate(pDistinct->a[i].pExpr); + if( p->op==TK_COLUMN && p->iTable==iBase && p->iColumn<0 ) return 1; + } + + /* Loop through all indices on the table, checking each to see if it makes + ** the DISTINCT qualifier redundant. It does so if: + ** + ** 1. The index is itself UNIQUE, and + ** + ** 2. All of the columns in the index are either part of the pDistinct + ** list, or else the WHERE clause contains a term of the form "col=X", + ** where X is a constant value. The collation sequences of the + ** comparison and select-list expressions must match those of the index. + ** + ** 3. All of those index columns for which the WHERE clause does not + ** contain a "col=X" term are subject to a NOT NULL constraint. + */ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( !IsUniqueIndex(pIdx) ) continue; + for(i=0; inKeyCol; i++){ + i16 iCol = pIdx->aiColumn[i]; + if( 0==findTerm(pWC, iBase, iCol, ~(Bitmask)0, WO_EQ, pIdx) ){ + int iIdxCol = findIndexCol(pParse, pDistinct, iBase, pIdx, i); + if( iIdxCol<0 || pTab->aCol[iCol].notNull==0 ){ + break; + } + } + } + if( i==pIdx->nKeyCol ){ + /* This index implies that the DISTINCT qualifier is redundant. */ + return 1; + } } - return rc; + + return 0; } + /* -** Execute zSql on database db. Return an error code. +** Estimate the logarithm of the input value to base 2. */ -static int execSql(sqlite3 *db, char **pzErrMsg, const char *zSql){ - sqlite3_stmt *pStmt; - VVA_ONLY( int rc; ) - if( !zSql ){ - return SQLITE_NOMEM; - } - if( SQLITE_OK!=sqlite3_prepare(db, zSql, -1, &pStmt, 0) ){ - sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db)); - return sqlite3_errcode(db); - } - VVA_ONLY( rc = ) sqlite3_step(pStmt); - assert( rc!=SQLITE_ROW ); - return vacuumFinalize(db, pStmt, pzErrMsg); +static LogEst estLog(LogEst N){ + return N<=10 ? 0 : sqlite3LogEst(N) - 33; } /* -** Execute zSql on database db. The statement returns exactly -** one column. Execute this as SQL on the same database. +** Two routines for printing the content of an sqlite3_index_info +** structure. Used for testing and debugging only. If neither +** SQLITE_TEST or SQLITE_DEBUG are defined, then these routines +** are no-ops. */ -static int execExecSql(sqlite3 *db, char **pzErrMsg, const char *zSql){ - sqlite3_stmt *pStmt; - int rc; - - rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); - if( rc!=SQLITE_OK ) return rc; - - while( SQLITE_ROW==sqlite3_step(pStmt) ){ - rc = execSql(db, pzErrMsg, (char*)sqlite3_column_text(pStmt, 0)); - if( rc!=SQLITE_OK ){ - vacuumFinalize(db, pStmt, pzErrMsg); - return rc; - } +#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(WHERETRACE_ENABLED) +static void TRACE_IDX_INPUTS(sqlite3_index_info *p){ + int i; + if( !sqlite3WhereTrace ) return; + for(i=0; inConstraint; i++){ + sqlite3DebugPrintf(" constraint[%d]: col=%d termid=%d op=%d usabled=%d\n", + i, + p->aConstraint[i].iColumn, + p->aConstraint[i].iTermOffset, + p->aConstraint[i].op, + p->aConstraint[i].usable); } - - return vacuumFinalize(db, pStmt, pzErrMsg); + for(i=0; inOrderBy; i++){ + sqlite3DebugPrintf(" orderby[%d]: col=%d desc=%d\n", + i, + p->aOrderBy[i].iColumn, + p->aOrderBy[i].desc); + } +} +static void TRACE_IDX_OUTPUTS(sqlite3_index_info *p){ + int i; + if( !sqlite3WhereTrace ) return; + for(i=0; inConstraint; i++){ + sqlite3DebugPrintf(" usage[%d]: argvIdx=%d omit=%d\n", + i, + p->aConstraintUsage[i].argvIndex, + p->aConstraintUsage[i].omit); + } + sqlite3DebugPrintf(" idxNum=%d\n", p->idxNum); + sqlite3DebugPrintf(" idxStr=%s\n", p->idxStr); + sqlite3DebugPrintf(" orderByConsumed=%d\n", p->orderByConsumed); + sqlite3DebugPrintf(" estimatedCost=%g\n", p->estimatedCost); + sqlite3DebugPrintf(" estimatedRows=%lld\n", p->estimatedRows); } +#else +#define TRACE_IDX_INPUTS(A) +#define TRACE_IDX_OUTPUTS(A) +#endif +#ifndef SQLITE_OMIT_AUTOMATIC_INDEX /* -** The non-standard VACUUM command is used to clean up the database, -** collapse free space, etc. It is modelled after the VACUUM command -** in PostgreSQL. -** -** In version 1.0.x of SQLite, the VACUUM command would call -** gdbm_reorganize() on all the database tables. But beginning -** with 2.0.0, SQLite no longer uses GDBM so this command has -** become a no-op. +** Return TRUE if the WHERE clause term pTerm is of a form where it +** could be used with an index to access pSrc, assuming an appropriate +** index existed. */ -SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){ - Vdbe *v = sqlite3GetVdbe(pParse); - if( v ){ - sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0); - } - return; +static int termCanDriveIndex( + WhereTerm *pTerm, /* WHERE clause term to check */ + struct SrcList_item *pSrc, /* Table we are trying to access */ + Bitmask notReady /* Tables in outer loops of the join */ +){ + char aff; + if( pTerm->leftCursor!=pSrc->iCursor ) return 0; + if( (pTerm->eOperator & WO_EQ)==0 ) return 0; + if( (pTerm->prereqRight & notReady)!=0 ) return 0; + if( pTerm->u.leftColumn<0 ) return 0; + aff = pSrc->pTab->aCol[pTerm->u.leftColumn].affinity; + if( !sqlite3IndexAffinityOk(pTerm->pExpr, aff) ) return 0; + return 1; } +#endif + +#ifndef SQLITE_OMIT_AUTOMATIC_INDEX /* -** This routine implements the OP_Vacuum opcode of the VDBE. +** Generate code to construct the Index object for an automatic index +** and to set up the WhereLevel object pLevel so that the code generator +** makes use of the automatic index. */ -SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){ - int rc = SQLITE_OK; /* Return code from service routines */ - Btree *pMain; /* The database being vacuumed */ - Btree *pTemp; /* The temporary database we vacuum into */ - char *zSql = 0; /* SQL statements */ - int saved_flags; /* Saved value of the db->flags */ - int saved_nChange; /* Saved value of db->nChange */ - int saved_nTotalChange; /* Saved value of db->nTotalChange */ - void (*saved_xTrace)(void*,const char*); /* Saved db->xTrace */ - Db *pDb = 0; /* Database to detach at end of vacuum */ - int isMemDb; /* True if vacuuming a :memory: database */ - int nRes; /* Bytes of reserved space at the end of each page */ - int nDb; /* Number of attached databases */ +static void constructAutomaticIndex( + Parse *pParse, /* The parsing context */ + WhereClause *pWC, /* The WHERE clause */ + struct SrcList_item *pSrc, /* The FROM clause term to get the next index */ + Bitmask notReady, /* Mask of cursors that are not available */ + WhereLevel *pLevel /* Write new index here */ +){ + int nKeyCol; /* Number of columns in the constructed index */ + WhereTerm *pTerm; /* A single term of the WHERE clause */ + WhereTerm *pWCEnd; /* End of pWC->a[] */ + Index *pIdx; /* Object describing the transient index */ + Vdbe *v; /* Prepared statement under construction */ + int addrInit; /* Address of the initialization bypass jump */ + Table *pTable; /* The table being indexed */ + int addrTop; /* Top of the index fill loop */ + int regRecord; /* Register holding an index record */ + int n; /* Column counter */ + int i; /* Loop counter */ + int mxBitCol; /* Maximum column in pSrc->colUsed */ + CollSeq *pColl; /* Collating sequence to on a column */ + WhereLoop *pLoop; /* The Loop object */ + char *zNotUsed; /* Extra space on the end of pIdx */ + Bitmask idxCols; /* Bitmap of columns used for indexing */ + Bitmask extraCols; /* Bitmap of additional columns */ + u8 sentWarning = 0; /* True if a warnning has been issued */ - if( !db->autoCommit ){ - sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction"); - return SQLITE_ERROR; - } - if( db->activeVdbeCnt>1 ){ - sqlite3SetString(pzErrMsg, db,"cannot VACUUM - SQL statements in progress"); - return SQLITE_ERROR; + /* Generate code to skip over the creation and initialization of the + ** transient index on 2nd and subsequent iterations of the loop. */ + v = pParse->pVdbe; + assert( v!=0 ); + addrInit = sqlite3CodeOnce(pParse); VdbeCoverage(v); + + /* Count the number of columns that will be added to the index + ** and used to match WHERE clause constraints */ + nKeyCol = 0; + pTable = pSrc->pTab; + pWCEnd = &pWC->a[pWC->nTerm]; + pLoop = pLevel->pWLoop; + idxCols = 0; + for(pTerm=pWC->a; pTermu.leftColumn; + Bitmask cMask = iCol>=BMS ? MASKBIT(BMS-1) : MASKBIT(iCol); + testcase( iCol==BMS ); + testcase( iCol==BMS-1 ); + if( !sentWarning ){ + sqlite3_log(SQLITE_WARNING_AUTOINDEX, + "automatic index on %s(%s)", pTable->zName, + pTable->aCol[iCol].zName); + sentWarning = 1; + } + if( (idxCols & cMask)==0 ){ + if( whereLoopResize(pParse->db, pLoop, nKeyCol+1) ) return; + pLoop->aLTerm[nKeyCol++] = pTerm; + idxCols |= cMask; + } + } } + assert( nKeyCol>0 ); + pLoop->u.btree.nEq = pLoop->nLTerm = nKeyCol; + pLoop->wsFlags = WHERE_COLUMN_EQ | WHERE_IDX_ONLY | WHERE_INDEXED + | WHERE_AUTO_INDEX; - /* Save the current value of the database flags so that it can be - ** restored before returning. Then set the writable-schema flag, and - ** disable CHECK and foreign key constraints. */ - saved_flags = db->flags; - saved_nChange = db->nChange; - saved_nTotalChange = db->nTotalChange; - saved_xTrace = db->xTrace; - db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks | SQLITE_PreferBuiltin; - db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder); - db->xTrace = 0; + /* Count the number of additional columns needed to create a + ** covering index. A "covering index" is an index that contains all + ** columns that are needed by the query. With a covering index, the + ** original table never needs to be accessed. Automatic indices must + ** be a covering index because the index will not be updated if the + ** original table changes and the index and table cannot both be used + ** if they go out of sync. + */ + extraCols = pSrc->colUsed & (~idxCols | MASKBIT(BMS-1)); + mxBitCol = (pTable->nCol >= BMS-1) ? BMS-1 : pTable->nCol; + testcase( pTable->nCol==BMS-1 ); + testcase( pTable->nCol==BMS-2 ); + for(i=0; icolUsed & MASKBIT(BMS-1) ){ + nKeyCol += pTable->nCol - BMS + 1; + } + pLoop->wsFlags |= WHERE_COLUMN_EQ | WHERE_IDX_ONLY; - pMain = db->aDb[0].pBt; - isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain)); + /* Construct the Index object to describe this index */ + pIdx = sqlite3AllocateIndexObject(pParse->db, nKeyCol+1, 0, &zNotUsed); + if( pIdx==0 ) return; + pLoop->u.btree.pIndex = pIdx; + pIdx->zName = "auto-index"; + pIdx->pTable = pTable; + n = 0; + idxCols = 0; + for(pTerm=pWC->a; pTermu.leftColumn; + Bitmask cMask = iCol>=BMS ? MASKBIT(BMS-1) : MASKBIT(iCol); + testcase( iCol==BMS-1 ); + testcase( iCol==BMS ); + if( (idxCols & cMask)==0 ){ + Expr *pX = pTerm->pExpr; + idxCols |= cMask; + pIdx->aiColumn[n] = pTerm->u.leftColumn; + pColl = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pX->pRight); + pIdx->azColl[n] = ALWAYS(pColl) ? pColl->zName : "BINARY"; + n++; + } + } + } + assert( (u32)n==pLoop->u.btree.nEq ); - /* Attach the temporary database as 'vacuum_db'. The synchronous pragma - ** can be set to 'off' for this file, as it is not recovered if a crash - ** occurs anyway. The integrity of the database is maintained by a - ** (possibly synchronous) transaction opened on the main database before - ** sqlite3BtreeCopyFile() is called. - ** - ** An optimisation would be to use a non-journaled pager. - ** (Later:) I tried setting "PRAGMA vacuum_db.journal_mode=OFF" but - ** that actually made the VACUUM run slower. Very little journalling - ** actually occurs when doing a vacuum since the vacuum_db is initially - ** empty. Only the journal header is written. Apparently it takes more - ** time to parse and run the PRAGMA to turn journalling off than it does - ** to write the journal header file. - */ - nDb = db->nDb; - if( sqlite3TempInMemory(db) ){ - zSql = "ATTACH ':memory:' AS vacuum_db;"; - }else{ - zSql = "ATTACH '' AS vacuum_db;"; + /* Add additional columns needed to make the automatic index into + ** a covering index */ + for(i=0; iaiColumn[n] = i; + pIdx->azColl[n] = "BINARY"; + n++; + } } - rc = execSql(db, pzErrMsg, zSql); - if( db->nDb>nDb ){ - pDb = &db->aDb[db->nDb-1]; - assert( strcmp(pDb->zName,"vacuum_db")==0 ); + if( pSrc->colUsed & MASKBIT(BMS-1) ){ + for(i=BMS-1; inCol; i++){ + pIdx->aiColumn[n] = i; + pIdx->azColl[n] = "BINARY"; + n++; + } } - if( rc!=SQLITE_OK ) goto end_of_vacuum; - pTemp = db->aDb[db->nDb-1].pBt; + assert( n==nKeyCol ); + pIdx->aiColumn[n] = -1; + pIdx->azColl[n] = "BINARY"; - /* The call to execSql() to attach the temp database has left the file - ** locked (as there was more than one active statement when the transaction - ** to read the schema was concluded. Unlock it here so that this doesn't - ** cause problems for the call to BtreeSetPageSize() below. */ - sqlite3BtreeCommit(pTemp); + /* Create the automatic index */ + assert( pLevel->iIdxCur>=0 ); + pLevel->iIdxCur = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_OpenAutoindex, pLevel->iIdxCur, nKeyCol+1); + sqlite3VdbeSetP4KeyInfo(pParse, pIdx); + VdbeComment((v, "for %s", pTable->zName)); - nRes = sqlite3BtreeGetReserve(pMain); + /* Fill the automatic index with content */ + addrTop = sqlite3VdbeAddOp1(v, OP_Rewind, pLevel->iTabCur); VdbeCoverage(v); + regRecord = sqlite3GetTempReg(pParse); + sqlite3GenerateIndexKey(pParse, pIdx, pLevel->iTabCur, regRecord, 0, 0, 0, 0); + sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord); + sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX); + sqlite3VdbeJumpHere(v, addrTop); + sqlite3ReleaseTempReg(pParse, regRecord); + + /* Jump here when skipping the initialization */ + sqlite3VdbeJumpHere(v, addrInit); +} +#endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ - /* A VACUUM cannot change the pagesize of an encrypted database. */ -#ifdef SQLITE_HAS_CODEC - if( db->nextPagesize ){ - extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*); - int nKey; - char *zKey; - sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey); - if( nKey ) db->nextPagesize = 0; - } -#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE +/* +** Allocate and populate an sqlite3_index_info structure. It is the +** responsibility of the caller to eventually release the structure +** by passing the pointer returned by this function to sqlite3_free(). +*/ +static sqlite3_index_info *allocateIndexInfo( + Parse *pParse, + WhereClause *pWC, + struct SrcList_item *pSrc, + ExprList *pOrderBy +){ + int i, j; + int nTerm; + struct sqlite3_index_constraint *pIdxCons; + struct sqlite3_index_orderby *pIdxOrderBy; + struct sqlite3_index_constraint_usage *pUsage; + WhereTerm *pTerm; + int nOrderBy; + sqlite3_index_info *pIdxInfo; - /* Do not attempt to change the page size for a WAL database */ - if( sqlite3PagerGetJournalMode(sqlite3BtreePager(pMain)) - ==PAGER_JOURNALMODE_WAL ){ - db->nextPagesize = 0; + /* Count the number of possible WHERE clause constraints referring + ** to this virtual table */ + for(i=nTerm=0, pTerm=pWC->a; inTerm; i++, pTerm++){ + if( pTerm->leftCursor != pSrc->iCursor ) continue; + assert( IsPowerOfTwo(pTerm->eOperator & ~WO_EQUIV) ); + testcase( pTerm->eOperator & WO_IN ); + testcase( pTerm->eOperator & WO_ISNULL ); + testcase( pTerm->eOperator & WO_ALL ); + if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV))==0 ) continue; + if( pTerm->wtFlags & TERM_VNULL ) continue; + nTerm++; } - if( sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain), nRes, 0) - || (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes, 0)) - || NEVER(db->mallocFailed) - ){ - rc = SQLITE_NOMEM; - goto end_of_vacuum; + /* If the ORDER BY clause contains only columns in the current + ** virtual table then allocate space for the aOrderBy part of + ** the sqlite3_index_info structure. + */ + nOrderBy = 0; + if( pOrderBy ){ + int n = pOrderBy->nExpr; + for(i=0; ia[i].pExpr; + if( pExpr->op!=TK_COLUMN || pExpr->iTable!=pSrc->iCursor ) break; + } + if( i==n){ + nOrderBy = n; + } } - rc = execSql(db, pzErrMsg, "PRAGMA vacuum_db.synchronous=OFF"); - if( rc!=SQLITE_OK ){ - goto end_of_vacuum; + + /* Allocate the sqlite3_index_info structure + */ + pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo) + + (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm + + sizeof(*pIdxOrderBy)*nOrderBy ); + if( pIdxInfo==0 ){ + sqlite3ErrorMsg(pParse, "out of memory"); + return 0; } -#ifndef SQLITE_OMIT_AUTOVACUUM - sqlite3BtreeSetAutoVacuum(pTemp, db->nextAutovac>=0 ? db->nextAutovac : - sqlite3BtreeGetAutoVacuum(pMain)); -#endif + /* Initialize the structure. The sqlite3_index_info structure contains + ** many fields that are declared "const" to prevent xBestIndex from + ** changing them. We have to do some funky casting in order to + ** initialize those fields. + */ + pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1]; + pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm]; + pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy]; + *(int*)&pIdxInfo->nConstraint = nTerm; + *(int*)&pIdxInfo->nOrderBy = nOrderBy; + *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint = pIdxCons; + *(struct sqlite3_index_orderby**)&pIdxInfo->aOrderBy = pIdxOrderBy; + *(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage = + pUsage; - /* Begin a transaction */ - rc = execSql(db, pzErrMsg, "BEGIN EXCLUSIVE;"); - if( rc!=SQLITE_OK ) goto end_of_vacuum; + for(i=j=0, pTerm=pWC->a; inTerm; i++, pTerm++){ + u8 op; + if( pTerm->leftCursor != pSrc->iCursor ) continue; + assert( IsPowerOfTwo(pTerm->eOperator & ~WO_EQUIV) ); + testcase( pTerm->eOperator & WO_IN ); + testcase( pTerm->eOperator & WO_ISNULL ); + testcase( pTerm->eOperator & WO_ALL ); + if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV))==0 ) continue; + if( pTerm->wtFlags & TERM_VNULL ) continue; + pIdxCons[j].iColumn = pTerm->u.leftColumn; + pIdxCons[j].iTermOffset = i; + op = (u8)pTerm->eOperator & WO_ALL; + if( op==WO_IN ) op = WO_EQ; + pIdxCons[j].op = op; + /* The direct assignment in the previous line is possible only because + ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The + ** following asserts verify this fact. */ + assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); + assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); + assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); + assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); + assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); + assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH ); + assert( pTerm->eOperator & (WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) ); + j++; + } + for(i=0; ia[i].pExpr; + pIdxOrderBy[i].iColumn = pExpr->iColumn; + pIdxOrderBy[i].desc = pOrderBy->a[i].sortOrder; + } - /* Query the schema of the main database. Create a mirror schema - ** in the temporary database. - */ - rc = execExecSql(db, pzErrMsg, - "SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) " - " FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'" - " AND rootpage>0" - ); - if( rc!=SQLITE_OK ) goto end_of_vacuum; - rc = execExecSql(db, pzErrMsg, - "SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14)" - " FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' "); - if( rc!=SQLITE_OK ) goto end_of_vacuum; - rc = execExecSql(db, pzErrMsg, - "SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21) " - " FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'"); - if( rc!=SQLITE_OK ) goto end_of_vacuum; + return pIdxInfo; +} - /* Loop through the tables in the main database. For each, do - ** an "INSERT INTO vacuum_db.xxx SELECT * FROM main.xxx;" to copy - ** the contents to the temporary database. - */ - rc = execExecSql(db, pzErrMsg, - "SELECT 'INSERT INTO vacuum_db.' || quote(name) " - "|| ' SELECT * FROM main.' || quote(name) || ';'" - "FROM main.sqlite_master " - "WHERE type = 'table' AND name!='sqlite_sequence' " - " AND rootpage>0" - ); - if( rc!=SQLITE_OK ) goto end_of_vacuum; +/* +** The table object reference passed as the second argument to this function +** must represent a virtual table. This function invokes the xBestIndex() +** method of the virtual table with the sqlite3_index_info object that +** comes in as the 3rd argument to this function. +** +** If an error occurs, pParse is populated with an error message and a +** non-zero value is returned. Otherwise, 0 is returned and the output +** part of the sqlite3_index_info structure is left populated. +** +** Whether or not an error is returned, it is the responsibility of the +** caller to eventually free p->idxStr if p->needToFreeIdxStr indicates +** that this is required. +*/ +static int vtabBestIndex(Parse *pParse, Table *pTab, sqlite3_index_info *p){ + sqlite3_vtab *pVtab = sqlite3GetVTable(pParse->db, pTab)->pVtab; + int i; + int rc; - /* Copy over the sequence table - */ - rc = execExecSql(db, pzErrMsg, - "SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' " - "FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' " - ); - if( rc!=SQLITE_OK ) goto end_of_vacuum; - rc = execExecSql(db, pzErrMsg, - "SELECT 'INSERT INTO vacuum_db.' || quote(name) " - "|| ' SELECT * FROM main.' || quote(name) || ';' " - "FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';" - ); - if( rc!=SQLITE_OK ) goto end_of_vacuum; + TRACE_IDX_INPUTS(p); + rc = pVtab->pModule->xBestIndex(pVtab, p); + TRACE_IDX_OUTPUTS(p); + + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ){ + pParse->db->mallocFailed = 1; + }else if( !pVtab->zErrMsg ){ + sqlite3ErrorMsg(pParse, "%s", sqlite3ErrStr(rc)); + }else{ + sqlite3ErrorMsg(pParse, "%s", pVtab->zErrMsg); + } + } + sqlite3_free(pVtab->zErrMsg); + pVtab->zErrMsg = 0; + for(i=0; inConstraint; i++){ + if( !p->aConstraint[i].usable && p->aConstraintUsage[i].argvIndex>0 ){ + sqlite3ErrorMsg(pParse, + "table %s: xBestIndex returned an invalid plan", pTab->zName); + } + } - /* Copy the triggers, views, and virtual tables from the main database - ** over to the temporary database. None of these objects has any - ** associated storage, so all we have to do is copy their entries - ** from the SQLITE_MASTER table. - */ - rc = execSql(db, pzErrMsg, - "INSERT INTO vacuum_db.sqlite_master " - " SELECT type, name, tbl_name, rootpage, sql" - " FROM main.sqlite_master" - " WHERE type='view' OR type='trigger'" - " OR (type='table' AND rootpage=0)" - ); - if( rc ) goto end_of_vacuum; + return pParse->nErr; +} +#endif /* !defined(SQLITE_OMIT_VIRTUALTABLE) */ - /* At this point, unless the main db was completely empty, there is now a - ** transaction open on the vacuum database, but not on the main database. - ** Open a btree level transaction on the main database. This allows a - ** call to sqlite3BtreeCopyFile(). The main database btree level - ** transaction is then committed, so the SQL level never knows it was - ** opened for writing. This way, the SQL transaction used to create the - ** temporary database never needs to be committed. - */ - { - u32 meta; - int i; - /* This array determines which meta meta values are preserved in the - ** vacuum. Even entries are the meta value number and odd entries - ** are an increment to apply to the meta value after the vacuum. - ** The increment is used to increase the schema cookie so that other - ** connections to the same database will know to reread the schema. - */ - static const unsigned char aCopy[] = { - BTREE_SCHEMA_VERSION, 1, /* Add one to the old schema cookie */ - BTREE_DEFAULT_CACHE_SIZE, 0, /* Preserve the default page cache size */ - BTREE_TEXT_ENCODING, 0, /* Preserve the text encoding */ - BTREE_USER_VERSION, 0, /* Preserve the user version */ - }; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +/* +** Estimate the location of a particular key among all keys in an +** index. Store the results in aStat as follows: +** +** aStat[0] Est. number of rows less than pVal +** aStat[1] Est. number of rows equal to pVal +** +** Return SQLITE_OK on success. +*/ +static void whereKeyStats( + Parse *pParse, /* Database connection */ + Index *pIdx, /* Index to consider domain of */ + UnpackedRecord *pRec, /* Vector of values to consider */ + int roundUp, /* Round up if true. Round down if false */ + tRowcnt *aStat /* OUT: stats written here */ +){ + IndexSample *aSample = pIdx->aSample; + int iCol; /* Index of required stats in anEq[] etc. */ + int iMin = 0; /* Smallest sample not yet tested */ + int i = pIdx->nSample; /* Smallest sample larger than or equal to pRec */ + int iTest; /* Next sample to test */ + int res; /* Result of comparison operation */ - assert( 1==sqlite3BtreeIsInTrans(pTemp) ); - assert( 1==sqlite3BtreeIsInTrans(pMain) ); +#ifndef SQLITE_DEBUG + UNUSED_PARAMETER( pParse ); +#endif + assert( pRec!=0 ); + iCol = pRec->nField - 1; + assert( pIdx->nSample>0 ); + assert( pRec->nField>0 && iColnSampleCol ); + do{ + iTest = (iMin+i)/2; + res = sqlite3VdbeRecordCompare(aSample[iTest].n, aSample[iTest].p, pRec); + if( res<0 ){ + iMin = iTest+1; + }else{ + i = iTest; + } + }while( res && iMinnSample ); + assert( 0==sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec) + || pParse->db->mallocFailed ); + }else{ + /* Otherwise, pRec must be smaller than sample $i and larger than + ** sample ($i-1). */ + assert( i==pIdx->nSample + || sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec)>0 + || pParse->db->mallocFailed ); + assert( i==0 + || sqlite3VdbeRecordCompare(aSample[i-1].n, aSample[i-1].p, pRec)<0 + || pParse->db->mallocFailed ); + } +#endif /* ifdef SQLITE_DEBUG */ + + /* At this point, aSample[i] is the first sample that is greater than + ** or equal to pVal. Or if i==pIdx->nSample, then all samples are less + ** than pVal. If aSample[i]==pVal, then res==0. + */ + if( res==0 ){ + aStat[0] = aSample[i].anLt[iCol]; + aStat[1] = aSample[i].anEq[iCol]; + }else{ + tRowcnt iLower, iUpper, iGap; + if( i==0 ){ + iLower = 0; + iUpper = aSample[0].anLt[iCol]; + }else{ + i64 nRow0 = sqlite3LogEstToInt(pIdx->aiRowLogEst[0]); + iUpper = i>=pIdx->nSample ? nRow0 : aSample[i].anLt[iCol]; + iLower = aSample[i-1].anEq[iCol] + aSample[i-1].anLt[iCol]; + } + aStat[1] = pIdx->aAvgEq[iCol]; + if( iLower>=iUpper ){ + iGap = 0; + }else{ + iGap = iUpper - iLower; + } + if( roundUp ){ + iGap = (iGap*2)/3; + }else{ + iGap = iGap/3; } + aStat[0] = iLower + iGap; + } +} +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ - rc = sqlite3BtreeCopyFile(pMain, pTemp); - if( rc!=SQLITE_OK ) goto end_of_vacuum; - rc = sqlite3BtreeCommit(pTemp); - if( rc!=SQLITE_OK ) goto end_of_vacuum; -#ifndef SQLITE_OMIT_AUTOVACUUM - sqlite3BtreeSetAutoVacuum(pMain, sqlite3BtreeGetAutoVacuum(pTemp)); -#endif +/* +** If it is not NULL, pTerm is a term that provides an upper or lower +** bound on a range scan. Without considering pTerm, it is estimated +** that the scan will visit nNew rows. This function returns the number +** estimated to be visited after taking pTerm into account. +** +** If the user explicitly specified a likelihood() value for this term, +** then the return value is the likelihood multiplied by the number of +** input rows. Otherwise, this function assumes that an "IS NOT NULL" term +** has a likelihood of 0.50, and any other term a likelihood of 0.25. +*/ +static LogEst whereRangeAdjust(WhereTerm *pTerm, LogEst nNew){ + LogEst nRet = nNew; + if( pTerm ){ + if( pTerm->truthProb<=0 ){ + nRet += pTerm->truthProb; + }else if( (pTerm->wtFlags & TERM_VNULL)==0 ){ + nRet -= 20; assert( 20==sqlite3LogEst(4) ); + } } + return nRet; +} - assert( rc==SQLITE_OK ); - rc = sqlite3BtreeSetPageSize(pMain, sqlite3BtreeGetPageSize(pTemp), nRes,1); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +/* +** This function is called to estimate the number of rows visited by a +** range-scan on a skip-scan index. For example: +** +** CREATE INDEX i1 ON t1(a, b, c); +** SELECT * FROM t1 WHERE a=? AND c BETWEEN ? AND ?; +** +** Value pLoop->nOut is currently set to the estimated number of rows +** visited for scanning (a=? AND b=?). This function reduces that estimate +** by some factor to account for the (c BETWEEN ? AND ?) expression based +** on the stat4 data for the index. this scan will be peformed multiple +** times (once for each (a,b) combination that matches a=?) is dealt with +** by the caller. +** +** It does this by scanning through all stat4 samples, comparing values +** extracted from pLower and pUpper with the corresponding column in each +** sample. If L and U are the number of samples found to be less than or +** equal to the values extracted from pLower and pUpper respectively, and +** N is the total number of samples, the pLoop->nOut value is adjusted +** as follows: +** +** nOut = nOut * ( min(U - L, 1) / N ) +** +** If pLower is NULL, or a value cannot be extracted from the term, L is +** set to zero. If pUpper is NULL, or a value cannot be extracted from it, +** U is set to N. +** +** Normally, this function sets *pbDone to 1 before returning. However, +** if no value can be extracted from either pLower or pUpper (and so the +** estimate of the number of rows delivered remains unchanged), *pbDone +** is left as is. +** +** If an error occurs, an SQLite error code is returned. Otherwise, +** SQLITE_OK. +*/ +static int whereRangeSkipScanEst( + Parse *pParse, /* Parsing & code generating context */ + WhereTerm *pLower, /* Lower bound on the range. ex: "x>123" Might be NULL */ + WhereTerm *pUpper, /* Upper bound on the range. ex: "x<455" Might be NULL */ + WhereLoop *pLoop, /* Update the .nOut value of this loop */ + int *pbDone /* Set to true if at least one expr. value extracted */ +){ + Index *p = pLoop->u.btree.pIndex; + int nEq = pLoop->u.btree.nEq; + sqlite3 *db = pParse->db; + int nLower = -1; + int nUpper = p->nSample+1; + int rc = SQLITE_OK; + int iCol = p->aiColumn[nEq]; + u8 aff = iCol>=0 ? p->pTable->aCol[iCol].affinity : SQLITE_AFF_INTEGER; + CollSeq *pColl; + + sqlite3_value *p1 = 0; /* Value extracted from pLower */ + sqlite3_value *p2 = 0; /* Value extracted from pUpper */ + sqlite3_value *pVal = 0; /* Value extracted from record */ -end_of_vacuum: - /* Restore the original value of db->flags */ - db->flags = saved_flags; - db->nChange = saved_nChange; - db->nTotalChange = saved_nTotalChange; - db->xTrace = saved_xTrace; - sqlite3BtreeSetPageSize(pMain, -1, -1, 1); + pColl = sqlite3LocateCollSeq(pParse, p->azColl[nEq]); + if( pLower ){ + rc = sqlite3Stat4ValueFromExpr(pParse, pLower->pExpr->pRight, aff, &p1); + nLower = 0; + } + if( pUpper && rc==SQLITE_OK ){ + rc = sqlite3Stat4ValueFromExpr(pParse, pUpper->pExpr->pRight, aff, &p2); + nUpper = p2 ? 0 : p->nSample; + } - /* Currently there is an SQL level transaction open on the vacuum - ** database. No locks are held on any other files (since the main file - ** was committed at the btree level). So it safe to end the transaction - ** by manually setting the autoCommit flag to true and detaching the - ** vacuum database. The vacuum_db journal file is deleted when the pager - ** is closed by the DETACH. - */ - db->autoCommit = 1; + if( p1 || p2 ){ + int i; + int nDiff; + for(i=0; rc==SQLITE_OK && inSample; i++){ + rc = sqlite3Stat4Column(db, p->aSample[i].p, p->aSample[i].n, nEq, &pVal); + if( rc==SQLITE_OK && p1 ){ + int res = sqlite3MemCompare(p1, pVal, pColl); + if( res>=0 ) nLower++; + } + if( rc==SQLITE_OK && p2 ){ + int res = sqlite3MemCompare(p2, pVal, pColl); + if( res>=0 ) nUpper++; + } + } + nDiff = (nUpper - nLower); + if( nDiff<=0 ) nDiff = 1; - if( pDb ){ - sqlite3BtreeClose(pDb->pBt); - pDb->pBt = 0; - pDb->pSchema = 0; + /* If there is both an upper and lower bound specified, and the + ** comparisons indicate that they are close together, use the fallback + ** method (assume that the scan visits 1/64 of the rows) for estimating + ** the number of rows visited. Otherwise, estimate the number of rows + ** using the method described in the header comment for this function. */ + if( nDiff!=1 || pUpper==0 || pLower==0 ){ + int nAdjust = (sqlite3LogEst(p->nSample) - sqlite3LogEst(nDiff)); + pLoop->nOut -= nAdjust; + *pbDone = 1; + WHERETRACE(0x10, ("range skip-scan regions: %u..%u adjust=%d est=%d\n", + nLower, nUpper, nAdjust*-1, pLoop->nOut)); + } + + }else{ + assert( *pbDone==0 ); } - /* This both clears the schemas and reduces the size of the db->aDb[] - ** array. */ - sqlite3ResetInternalSchema(db, -1); + sqlite3ValueFree(p1); + sqlite3ValueFree(p2); + sqlite3ValueFree(pVal); return rc; } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ -#endif /* SQLITE_OMIT_VACUUM && SQLITE_OMIT_ATTACH */ - -/************** End of vacuum.c **********************************************/ -/************** Begin file vtab.c ********************************************/ /* -** 2006 June 10 +** This function is used to estimate the number of rows that will be visited +** by scanning an index for a range of values. The range may have an upper +** bound, a lower bound, or both. The WHERE clause terms that set the upper +** and lower bounds are represented by pLower and pUpper respectively. For +** example, assuming that index p is on t1(a): ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** ... FROM t1 WHERE a > ? AND a < ? ... +** |_____| |_____| +** | | +** pLower pUpper ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** If either of the upper or lower bound is not present, then NULL is passed in +** place of the corresponding WhereTerm. ** -************************************************************************* -** This file contains code used to help implement virtual tables. +** The value in (pBuilder->pNew->u.btree.nEq) is the index of the index +** column subject to the range constraint. Or, equivalently, the number of +** equality constraints optimized by the proposed index scan. For example, +** assuming index p is on t1(a, b), and the SQL query is: +** +** ... FROM t1 WHERE a = ? AND b > ? AND b < ? ... +** +** then nEq is set to 1 (as the range restricted column, b, is the second +** left-most column of the index). Or, if the query is: +** +** ... FROM t1 WHERE a > ? AND a < ? ... +** +** then nEq is set to 0. +** +** When this function is called, *pnOut is set to the sqlite3LogEst() of the +** number of rows that the index scan is expected to visit without +** considering the range constraints. If nEq is 0, this is the number of +** rows in the index. Assuming no error occurs, *pnOut is adjusted (reduced) +** to account for the range constraints pLower and pUpper. +** +** In the absence of sqlite_stat4 ANALYZE data, or if such data cannot be +** used, a single range inequality reduces the search space by a factor of 4. +** and a pair of constraints (x>? AND x123" Might be NULL */ + WhereTerm *pUpper, /* Upper bound on the range. ex: "x<455" Might be NULL */ + WhereLoop *pLoop /* Modify the .nOut and maybe .rRun fields */ +){ + int rc = SQLITE_OK; + int nOut = pLoop->nOut; + LogEst nNew; -/* -** Before a virtual table xCreate() or xConnect() method is invoked, the -** sqlite3.pVtabCtx member variable is set to point to an instance of -** this struct allocated on the stack. It is used by the implementation of -** the sqlite3_declare_vtab() and sqlite3_vtab_config() APIs, both of which -** are invoked only from within xCreate and xConnect methods. -*/ -struct VtabCtx { - Table *pTab; - VTable *pVTable; -}; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + Index *p = pLoop->u.btree.pIndex; + int nEq = pLoop->u.btree.nEq; -/* -** The actual function that does the work of creating a new module. -** This function implements the sqlite3_create_module() and -** sqlite3_create_module_v2() interfaces. -*/ -static int createModule( - sqlite3 *db, /* Database in which module is registered */ - const char *zName, /* Name assigned to this module */ - const sqlite3_module *pModule, /* The definition of the module */ - void *pAux, /* Context pointer for xCreate/xConnect */ - void (*xDestroy)(void *) /* Module destructor function */ -){ - int rc, nName; - Module *pMod; + if( p->nSample>0 + && nEqnSampleCol + && OptimizationEnabled(pParse->db, SQLITE_Stat3) + ){ + if( nEq==pBuilder->nRecValid ){ + UnpackedRecord *pRec = pBuilder->pRec; + tRowcnt a[2]; + u8 aff; + + /* Variable iLower will be set to the estimate of the number of rows in + ** the index that are less than the lower bound of the range query. The + ** lower bound being the concatenation of $P and $L, where $P is the + ** key-prefix formed by the nEq values matched against the nEq left-most + ** columns of the index, and $L is the value in pLower. + ** + ** Or, if pLower is NULL or $L cannot be extracted from it (because it + ** is not a simple variable or literal value), the lower bound of the + ** range is $P. Due to a quirk in the way whereKeyStats() works, even + ** if $L is available, whereKeyStats() is called for both ($P) and + ** ($P:$L) and the larger of the two returned values used. + ** + ** Similarly, iUpper is to be set to the estimate of the number of rows + ** less than the upper bound of the range query. Where the upper bound + ** is either ($P) or ($P:$U). Again, even if $U is available, both values + ** of iUpper are requested of whereKeyStats() and the smaller used. + */ + tRowcnt iLower; + tRowcnt iUpper; - sqlite3_mutex_enter(db->mutex); - nName = sqlite3Strlen30(zName); - pMod = (Module *)sqlite3DbMallocRaw(db, sizeof(Module) + nName + 1); - if( pMod ){ - Module *pDel; - char *zCopy = (char *)(&pMod[1]); - memcpy(zCopy, zName, nName+1); - pMod->zName = zCopy; - pMod->pModule = pModule; - pMod->pAux = pAux; - pMod->xDestroy = xDestroy; - pDel = (Module *)sqlite3HashInsert(&db->aModule, zCopy, nName, (void*)pMod); - if( pDel && pDel->xDestroy ){ - sqlite3ResetInternalSchema(db, -1); - pDel->xDestroy(pDel->pAux); - } - sqlite3DbFree(db, pDel); - if( pDel==pMod ){ - db->mallocFailed = 1; + if( pRec ){ + testcase( pRec->nField!=pBuilder->nRecValid ); + pRec->nField = pBuilder->nRecValid; + } + if( nEq==p->nKeyCol ){ + aff = SQLITE_AFF_INTEGER; + }else{ + aff = p->pTable->aCol[p->aiColumn[nEq]].affinity; + } + /* Determine iLower and iUpper using ($P) only. */ + if( nEq==0 ){ + iLower = 0; + iUpper = sqlite3LogEstToInt(p->aiRowLogEst[0]); + }else{ + /* Note: this call could be optimized away - since the same values must + ** have been requested when testing key $P in whereEqualScanEst(). */ + whereKeyStats(pParse, p, pRec, 0, a); + iLower = a[0]; + iUpper = a[0] + a[1]; + } + + assert( pLower==0 || (pLower->eOperator & (WO_GT|WO_GE))!=0 ); + assert( pUpper==0 || (pUpper->eOperator & (WO_LT|WO_LE))!=0 ); + assert( p->aSortOrder!=0 ); + if( p->aSortOrder[nEq] ){ + /* The roles of pLower and pUpper are swapped for a DESC index */ + SWAP(WhereTerm*, pLower, pUpper); + } + + /* If possible, improve on the iLower estimate using ($P:$L). */ + if( pLower ){ + int bOk; /* True if value is extracted from pExpr */ + Expr *pExpr = pLower->pExpr->pRight; + rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); + if( rc==SQLITE_OK && bOk ){ + tRowcnt iNew; + whereKeyStats(pParse, p, pRec, 0, a); + iNew = a[0] + ((pLower->eOperator & (WO_GT|WO_LE)) ? a[1] : 0); + if( iNew>iLower ) iLower = iNew; + nOut--; + pLower = 0; + } + } + + /* If possible, improve on the iUpper estimate using ($P:$U). */ + if( pUpper ){ + int bOk; /* True if value is extracted from pExpr */ + Expr *pExpr = pUpper->pExpr->pRight; + rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); + if( rc==SQLITE_OK && bOk ){ + tRowcnt iNew; + whereKeyStats(pParse, p, pRec, 1, a); + iNew = a[0] + ((pUpper->eOperator & (WO_GT|WO_LE)) ? a[1] : 0); + if( iNewpRec = pRec; + if( rc==SQLITE_OK ){ + if( iUpper>iLower ){ + nNew = sqlite3LogEst(iUpper - iLower); + }else{ + nNew = 10; assert( 10==sqlite3LogEst(2) ); + } + if( nNewmutex); +#else + UNUSED_PARAMETER(pParse); + UNUSED_PARAMETER(pBuilder); + assert( pLower || pUpper ); +#endif + assert( pUpper==0 || (pUpper->wtFlags & TERM_VNULL)==0 ); + nNew = whereRangeAdjust(pLower, nOut); + nNew = whereRangeAdjust(pUpper, nNew); + + /* TUNING: If there is both an upper and lower limit, assume the range is + ** reduced by an additional 75%. This means that, by default, an open-ended + ** range query (e.g. col > ?) is assumed to match 1/4 of the rows in the + ** index. While a closed range (e.g. col BETWEEN ? AND ?) is estimated to + ** match 1/64 of the index. */ + if( pLower && pUpper ) nNew -= 20; + + nOut -= (pLower!=0) + (pUpper!=0); + if( nNew<10 ) nNew = 10; + if( nNewnOut>nOut ){ + WHERETRACE(0x10,("Range scan lowers nOut from %d to %d\n", + pLoop->nOut, nOut)); + } +#endif + pLoop->nOut = (LogEst)nOut; return rc; } - +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 /* -** External API function used to create a new virtual-table module. +** Estimate the number of rows that will be returned based on +** an equality constraint x=VALUE and where that VALUE occurs in +** the histogram data. This only works when x is the left-most +** column of an index and sqlite_stat3 histogram data is available +** for that index. When pExpr==NULL that means the constraint is +** "x IS NULL" instead of "x=VALUE". +** +** Write the estimated row count into *pnRow and return SQLITE_OK. +** If unable to make an estimate, leave *pnRow unchanged and return +** non-zero. +** +** This routine can fail if it is unable to load a collating sequence +** required for string comparison, or if unable to allocate memory +** for a UTF conversion required for comparison. The error is stored +** in the pParse structure. */ -SQLITE_API int sqlite3_create_module( - sqlite3 *db, /* Database in which module is registered */ - const char *zName, /* Name assigned to this module */ - const sqlite3_module *pModule, /* The definition of the module */ - void *pAux /* Context pointer for xCreate/xConnect */ +static int whereEqualScanEst( + Parse *pParse, /* Parsing & code generating context */ + WhereLoopBuilder *pBuilder, + Expr *pExpr, /* Expression for VALUE in the x=VALUE constraint */ + tRowcnt *pnRow /* Write the revised row estimate here */ ){ - return createModule(db, zName, pModule, pAux, 0); + Index *p = pBuilder->pNew->u.btree.pIndex; + int nEq = pBuilder->pNew->u.btree.nEq; + UnpackedRecord *pRec = pBuilder->pRec; + u8 aff; /* Column affinity */ + int rc; /* Subfunction return code */ + tRowcnt a[2]; /* Statistics */ + int bOk; + + assert( nEq>=1 ); + assert( nEq<=p->nColumn ); + assert( p->aSample!=0 ); + assert( p->nSample>0 ); + assert( pBuilder->nRecValidnRecValid<(nEq-1) ){ + return SQLITE_NOTFOUND; + } + + /* This is an optimization only. The call to sqlite3Stat4ProbeSetValue() + ** below would return the same value. */ + if( nEq>=p->nColumn ){ + *pnRow = 1; + return SQLITE_OK; + } + + aff = p->pTable->aCol[p->aiColumn[nEq-1]].affinity; + rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq-1, &bOk); + pBuilder->pRec = pRec; + if( rc!=SQLITE_OK ) return rc; + if( bOk==0 ) return SQLITE_NOTFOUND; + pBuilder->nRecValid = nEq; + + whereKeyStats(pParse, p, pRec, 0, a); + WHERETRACE(0x10,("equality scan regions: %d\n", (int)a[1])); + *pnRow = a[1]; + + return rc; } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 /* -** External API function used to create a new virtual-table module. +** Estimate the number of rows that will be returned based on +** an IN constraint where the right-hand side of the IN operator +** is a list of values. Example: +** +** WHERE x IN (1,2,3,4) +** +** Write the estimated row count into *pnRow and return SQLITE_OK. +** If unable to make an estimate, leave *pnRow unchanged and return +** non-zero. +** +** This routine can fail if it is unable to load a collating sequence +** required for string comparison, or if unable to allocate memory +** for a UTF conversion required for comparison. The error is stored +** in the pParse structure. */ -SQLITE_API int sqlite3_create_module_v2( - sqlite3 *db, /* Database in which module is registered */ - const char *zName, /* Name assigned to this module */ - const sqlite3_module *pModule, /* The definition of the module */ - void *pAux, /* Context pointer for xCreate/xConnect */ - void (*xDestroy)(void *) /* Module destructor function */ -){ - return createModule(db, zName, pModule, pAux, xDestroy); +static int whereInScanEst( + Parse *pParse, /* Parsing & code generating context */ + WhereLoopBuilder *pBuilder, + ExprList *pList, /* The value list on the RHS of "x IN (v1,v2,v3,...)" */ + tRowcnt *pnRow /* Write the revised row estimate here */ +){ + Index *p = pBuilder->pNew->u.btree.pIndex; + i64 nRow0 = sqlite3LogEstToInt(p->aiRowLogEst[0]); + int nRecValid = pBuilder->nRecValid; + int rc = SQLITE_OK; /* Subfunction return code */ + tRowcnt nEst; /* Number of rows for a single term */ + tRowcnt nRowEst = 0; /* New estimate of the number of rows */ + int i; /* Loop counter */ + + assert( p->aSample!=0 ); + for(i=0; rc==SQLITE_OK && inExpr; i++){ + nEst = nRow0; + rc = whereEqualScanEst(pParse, pBuilder, pList->a[i].pExpr, &nEst); + nRowEst += nEst; + pBuilder->nRecValid = nRecValid; + } + + if( rc==SQLITE_OK ){ + if( nRowEst > nRow0 ) nRowEst = nRow0; + *pnRow = nRowEst; + WHERETRACE(0x10,("IN row estimate: est=%d\n", nRowEst)); + } + assert( pBuilder->nRecValid==nRecValid ); + return rc; } +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ /* -** Lock the virtual table so that it cannot be disconnected. -** Locks nest. Every lock should have a corresponding unlock. -** If an unlock is omitted, resources leaks will occur. +** Disable a term in the WHERE clause. Except, do not disable the term +** if it controls a LEFT OUTER JOIN and it did not originate in the ON +** or USING clause of that join. ** -** If a disconnect is attempted while a virtual table is locked, -** the disconnect is deferred until all locks have been removed. +** Consider the term t2.z='ok' in the following queries: +** +** (1) SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x WHERE t2.z='ok' +** (2) SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x AND t2.z='ok' +** (3) SELECT * FROM t1, t2 WHERE t1.a=t2.x AND t2.z='ok' +** +** The t2.z='ok' is disabled in the in (2) because it originates +** in the ON clause. The term is disabled in (3) because it is not part +** of a LEFT OUTER JOIN. In (1), the term is not disabled. +** +** Disabling a term causes that term to not be tested in the inner loop +** of the join. Disabling is an optimization. When terms are satisfied +** by indices, we disable them to prevent redundant tests in the inner +** loop. We would get the correct results if nothing were ever disabled, +** but joins might run a little slower. The trick is to disable as much +** as we can without disabling too much. If we disabled in (1), we'd get +** the wrong answer. See ticket #813. */ -SQLITE_PRIVATE void sqlite3VtabLock(VTable *pVTab){ - pVTab->nRef++; +static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){ + if( pTerm + && (pTerm->wtFlags & TERM_CODED)==0 + && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin)) + && (pLevel->notReady & pTerm->prereqAll)==0 + ){ + pTerm->wtFlags |= TERM_CODED; + if( pTerm->iParent>=0 ){ + WhereTerm *pOther = &pTerm->pWC->a[pTerm->iParent]; + if( (--pOther->nChild)==0 ){ + disableTerm(pLevel, pOther); + } + } + } } - /* -** pTab is a pointer to a Table structure representing a virtual-table. -** Return a pointer to the VTable object used by connection db to access -** this virtual-table, if one has been created, or NULL otherwise. +** Code an OP_Affinity opcode to apply the column affinity string zAff +** to the n registers starting at base. +** +** As an optimization, SQLITE_AFF_NONE entries (which are no-ops) at the +** beginning and end of zAff are ignored. If all entries in zAff are +** SQLITE_AFF_NONE, then no code gets generated. +** +** This routine makes its own copy of zAff so that the caller is free +** to modify zAff after this routine returns. */ -SQLITE_PRIVATE VTable *sqlite3GetVTable(sqlite3 *db, Table *pTab){ - VTable *pVtab; - assert( IsVirtual(pTab) ); - for(pVtab=pTab->pVTable; pVtab && pVtab->db!=db; pVtab=pVtab->pNext); - return pVtab; +static void codeApplyAffinity(Parse *pParse, int base, int n, char *zAff){ + Vdbe *v = pParse->pVdbe; + if( zAff==0 ){ + assert( pParse->db->mallocFailed ); + return; + } + assert( v!=0 ); + + /* Adjust base and n to skip over SQLITE_AFF_NONE entries at the beginning + ** and end of the affinity string. + */ + while( n>0 && zAff[0]==SQLITE_AFF_NONE ){ + n--; + base++; + zAff++; + } + while( n>1 && zAff[n-1]==SQLITE_AFF_NONE ){ + n--; + } + + /* Code the OP_Affinity opcode if there is anything left to do. */ + if( n>0 ){ + sqlite3VdbeAddOp2(v, OP_Affinity, base, n); + sqlite3VdbeChangeP4(v, -1, zAff, n); + sqlite3ExprCacheAffinityChange(pParse, base, n); + } } + /* -** Decrement the ref-count on a virtual table object. When the ref-count -** reaches zero, call the xDisconnect() method to delete the object. +** Generate code for a single equality term of the WHERE clause. An equality +** term can be either X=expr or X IN (...). pTerm is the term to be +** coded. +** +** The current value for the constraint is left in register iReg. +** +** For a constraint of the form X=expr, the expression is evaluated and its +** result is left on the stack. For constraints of the form X IN (...) +** this routine sets up a loop that will iterate over all values of X. */ -SQLITE_PRIVATE void sqlite3VtabUnlock(VTable *pVTab){ - sqlite3 *db = pVTab->db; +static int codeEqualityTerm( + Parse *pParse, /* The parsing context */ + WhereTerm *pTerm, /* The term of the WHERE clause to be coded */ + WhereLevel *pLevel, /* The level of the FROM clause we are working on */ + int iEq, /* Index of the equality term within this level */ + int bRev, /* True for reverse-order IN operations */ + int iTarget /* Attempt to leave results in this register */ +){ + Expr *pX = pTerm->pExpr; + Vdbe *v = pParse->pVdbe; + int iReg; /* Register holding results */ - assert( db ); - assert( pVTab->nRef>0 ); - assert( sqlite3SafetyCheckOk(db) ); + assert( iTarget>0 ); + if( pX->op==TK_EQ ){ + iReg = sqlite3ExprCodeTarget(pParse, pX->pRight, iTarget); + }else if( pX->op==TK_ISNULL ){ + iReg = iTarget; + sqlite3VdbeAddOp2(v, OP_Null, 0, iReg); +#ifndef SQLITE_OMIT_SUBQUERY + }else{ + int eType; + int iTab; + struct InLoop *pIn; + WhereLoop *pLoop = pLevel->pWLoop; - pVTab->nRef--; - if( pVTab->nRef==0 ){ - sqlite3_vtab *p = pVTab->pVtab; - if( p ){ - p->pModule->xDisconnect(p); + if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 + && pLoop->u.btree.pIndex!=0 + && pLoop->u.btree.pIndex->aSortOrder[iEq] + ){ + testcase( iEq==0 ); + testcase( bRev ); + bRev = !bRev; } - sqlite3DbFree(db, pVTab); + assert( pX->op==TK_IN ); + iReg = iTarget; + eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0); + if( eType==IN_INDEX_INDEX_DESC ){ + testcase( bRev ); + bRev = !bRev; + } + iTab = pX->iTable; + sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iTab, 0); + VdbeCoverageIf(v, bRev); + VdbeCoverageIf(v, !bRev); + assert( (pLoop->wsFlags & WHERE_MULTI_OR)==0 ); + pLoop->wsFlags |= WHERE_IN_ABLE; + if( pLevel->u.in.nIn==0 ){ + pLevel->addrNxt = sqlite3VdbeMakeLabel(v); + } + pLevel->u.in.nIn++; + pLevel->u.in.aInLoop = + sqlite3DbReallocOrFree(pParse->db, pLevel->u.in.aInLoop, + sizeof(pLevel->u.in.aInLoop[0])*pLevel->u.in.nIn); + pIn = pLevel->u.in.aInLoop; + if( pIn ){ + pIn += pLevel->u.in.nIn - 1; + pIn->iCur = iTab; + if( eType==IN_INDEX_ROWID ){ + pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iReg); + }else{ + pIn->addrInTop = sqlite3VdbeAddOp3(v, OP_Column, iTab, 0, iReg); + } + pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen; + sqlite3VdbeAddOp1(v, OP_IsNull, iReg); VdbeCoverage(v); + }else{ + pLevel->u.in.nIn = 0; + } +#endif } + disableTerm(pLevel, pTerm); + return iReg; } /* -** Table p is a virtual table. This function moves all elements in the -** p->pVTable list to the sqlite3.pDisconnect lists of their associated -** database connections to be disconnected at the next opportunity. -** Except, if argument db is not NULL, then the entry associated with -** connection db is left in the p->pVTable list. +** Generate code that will evaluate all == and IN constraints for an +** index scan. +** +** For example, consider table t1(a,b,c,d,e,f) with index i1(a,b,c). +** Suppose the WHERE clause is this: a==5 AND b IN (1,2,3) AND c>5 AND c<10 +** The index has as many as three equality constraints, but in this +** example, the third "c" value is an inequality. So only two +** constraints are coded. This routine will generate code to evaluate +** a==5 and b IN (1,2,3). The current values for a and b will be stored +** in consecutive registers and the index of the first register is returned. +** +** In the example above nEq==2. But this subroutine works for any value +** of nEq including 0. If nEq==0, this routine is nearly a no-op. +** The only thing it does is allocate the pLevel->iMem memory cell and +** compute the affinity string. +** +** The nExtraReg parameter is 0 or 1. It is 0 if all WHERE clause constraints +** are == or IN and are covered by the nEq. nExtraReg is 1 if there is +** an inequality constraint (such as the "c>=5 AND c<10" in the example) that +** occurs after the nEq quality constraints. +** +** This routine allocates a range of nEq+nExtraReg memory cells and returns +** the index of the first memory cell in that range. The code that +** calls this routine will use that memory range to store keys for +** start and termination conditions of the loop. +** key value of the loop. If one or more IN operators appear, then +** this routine allocates an additional nEq memory cells for internal +** use. +** +** Before returning, *pzAff is set to point to a buffer containing a +** copy of the column affinity string of the index allocated using +** sqlite3DbMalloc(). Except, entries in the copy of the string associated +** with equality constraints that use NONE affinity are set to +** SQLITE_AFF_NONE. This is to deal with SQL such as the following: +** +** CREATE TABLE t1(a TEXT PRIMARY KEY, b); +** SELECT ... FROM t1 AS t2, t1 WHERE t1.a = t2.b; +** +** In the example above, the index on t1(a) has TEXT affinity. But since +** the right hand side of the equality constraint (t2.b) has NONE affinity, +** no conversion should be attempted before using a t2.b value as part of +** a key to search the index. Hence the first byte in the returned affinity +** string in this example would be set to SQLITE_AFF_NONE. */ -static VTable *vtabDisconnectAll(sqlite3 *db, Table *p){ - VTable *pRet = 0; - VTable *pVTable = p->pVTable; - p->pVTable = 0; +static int codeAllEqualityTerms( + Parse *pParse, /* Parsing context */ + WhereLevel *pLevel, /* Which nested loop of the FROM we are coding */ + int bRev, /* Reverse the order of IN operators */ + int nExtraReg, /* Number of extra registers to allocate */ + char **pzAff /* OUT: Set to point to affinity string */ +){ + u16 nEq; /* The number of == or IN constraints to code */ + u16 nSkip; /* Number of left-most columns to skip */ + Vdbe *v = pParse->pVdbe; /* The vm under construction */ + Index *pIdx; /* The index being used for this loop */ + WhereTerm *pTerm; /* A single constraint term */ + WhereLoop *pLoop; /* The WhereLoop object */ + int j; /* Loop counter */ + int regBase; /* Base register */ + int nReg; /* Number of registers to allocate */ + char *zAff; /* Affinity string to return */ - /* Assert that the mutex (if any) associated with the BtShared database - ** that contains table p is held by the caller. See header comments - ** above function sqlite3VtabUnlockList() for an explanation of why - ** this makes it safe to access the sqlite3.pDisconnect list of any - ** database connection that may have an entry in the p->pVTable list. + /* This module is only called on query plans that use an index. */ + pLoop = pLevel->pWLoop; + assert( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 ); + nEq = pLoop->u.btree.nEq; + nSkip = pLoop->u.btree.nSkip; + pIdx = pLoop->u.btree.pIndex; + assert( pIdx!=0 ); + + /* Figure out how many memory cells we will need then allocate them. */ - assert( db==0 || sqlite3SchemaMutexHeld(db, 0, p->pSchema) ); + regBase = pParse->nMem + 1; + nReg = pLoop->u.btree.nEq + nExtraReg; + pParse->nMem += nReg; - while( pVTable ){ - sqlite3 *db2 = pVTable->db; - VTable *pNext = pVTable->pNext; - assert( db2 ); - if( db2==db ){ - pRet = pVTable; - p->pVTable = pRet; - pRet->pNext = 0; - }else{ - pVTable->pNext = db2->pDisconnect; - db2->pDisconnect = pVTable; + zAff = sqlite3DbStrDup(pParse->db, sqlite3IndexAffinityStr(v, pIdx)); + if( !zAff ){ + pParse->db->mallocFailed = 1; + } + + if( nSkip ){ + int iIdxCur = pLevel->iIdxCur; + sqlite3VdbeAddOp1(v, (bRev?OP_Last:OP_Rewind), iIdxCur); + VdbeCoverageIf(v, bRev==0); + VdbeCoverageIf(v, bRev!=0); + VdbeComment((v, "begin skip-scan on %s", pIdx->zName)); + j = sqlite3VdbeAddOp0(v, OP_Goto); + pLevel->addrSkip = sqlite3VdbeAddOp4Int(v, (bRev?OP_SeekLT:OP_SeekGT), + iIdxCur, 0, regBase, nSkip); + VdbeCoverageIf(v, bRev==0); + VdbeCoverageIf(v, bRev!=0); + sqlite3VdbeJumpHere(v, j); + for(j=0; jaiColumn[j]>=0 ); + VdbeComment((v, "%s", pIdx->pTable->aCol[pIdx->aiColumn[j]].zName)); + } + } + + /* Evaluate the equality constraints + */ + assert( zAff==0 || (int)strlen(zAff)>=nEq ); + for(j=nSkip; jaLTerm[j]; + assert( pTerm!=0 ); + /* The following testcase is true for indices with redundant columns. + ** Ex: CREATE INDEX i1 ON t1(a,b,a); SELECT * FROM t1 WHERE a=0 AND b=0; */ + testcase( (pTerm->wtFlags & TERM_CODED)!=0 ); + testcase( pTerm->wtFlags & TERM_VIRTUAL ); + r1 = codeEqualityTerm(pParse, pTerm, pLevel, j, bRev, regBase+j); + if( r1!=regBase+j ){ + if( nReg==1 ){ + sqlite3ReleaseTempReg(pParse, regBase); + regBase = r1; + }else{ + sqlite3VdbeAddOp2(v, OP_SCopy, r1, regBase+j); + } + } + testcase( pTerm->eOperator & WO_ISNULL ); + testcase( pTerm->eOperator & WO_IN ); + if( (pTerm->eOperator & (WO_ISNULL|WO_IN))==0 ){ + Expr *pRight = pTerm->pExpr->pRight; + if( sqlite3ExprCanBeNull(pRight) ){ + sqlite3VdbeAddOp2(v, OP_IsNull, regBase+j, pLevel->addrBrk); + VdbeCoverage(v); + } + if( zAff ){ + if( sqlite3CompareAffinity(pRight, zAff[j])==SQLITE_AFF_NONE ){ + zAff[j] = SQLITE_AFF_NONE; + } + if( sqlite3ExprNeedsNoAffinityChange(pRight, zAff[j]) ){ + zAff[j] = SQLITE_AFF_NONE; + } + } } - pVTable = pNext; } + *pzAff = zAff; + return regBase; +} - assert( !db || pRet ); - return pRet; +#ifndef SQLITE_OMIT_EXPLAIN +/* +** This routine is a helper for explainIndexRange() below +** +** pStr holds the text of an expression that we are building up one term +** at a time. This routine adds a new term to the end of the expression. +** Terms are separated by AND so add the "AND" text for second and subsequent +** terms only. +*/ +static void explainAppendTerm( + StrAccum *pStr, /* The text expression being built */ + int iTerm, /* Index of this term. First is zero */ + const char *zColumn, /* Name of the column */ + const char *zOp /* Name of the operator */ +){ + if( iTerm ) sqlite3StrAccumAppend(pStr, " AND ", 5); + sqlite3StrAccumAppendAll(pStr, zColumn); + sqlite3StrAccumAppend(pStr, zOp, 1); + sqlite3StrAccumAppend(pStr, "?", 1); } - /* -** Disconnect all the virtual table objects in the sqlite3.pDisconnect list. +** Argument pLevel describes a strategy for scanning table pTab. This +** function appends text to pStr that describes the subset of table +** rows scanned by the strategy in the form of an SQL expression. ** -** This function may only be called when the mutexes associated with all -** shared b-tree databases opened using connection db are held by the -** caller. This is done to protect the sqlite3.pDisconnect list. The -** sqlite3.pDisconnect list is accessed only as follows: +** For example, if the query: ** -** 1) By this function. In this case, all BtShared mutexes and the mutex -** associated with the database handle itself must be held. +** SELECT * FROM t1 WHERE a=1 AND b>2; ** -** 2) By function vtabDisconnectAll(), when it adds a VTable entry to -** the sqlite3.pDisconnect list. In this case either the BtShared mutex -** associated with the database the virtual table is stored in is held -** or, if the virtual table is stored in a non-sharable database, then -** the database handle mutex is held. +** is run and there is an index on (a, b), then this function returns a +** string similar to: ** -** As a result, a sqlite3.pDisconnect cannot be accessed simultaneously -** by multiple threads. It is thread-safe. +** "a=? AND b>?" */ -SQLITE_PRIVATE void sqlite3VtabUnlockList(sqlite3 *db){ - VTable *p = db->pDisconnect; - db->pDisconnect = 0; +static void explainIndexRange(StrAccum *pStr, WhereLoop *pLoop, Table *pTab){ + Index *pIndex = pLoop->u.btree.pIndex; + u16 nEq = pLoop->u.btree.nEq; + u16 nSkip = pLoop->u.btree.nSkip; + int i, j; + Column *aCol = pTab->aCol; + i16 *aiColumn = pIndex->aiColumn; - assert( sqlite3BtreeHoldsAllMutexes(db) ); - assert( sqlite3_mutex_held(db->mutex) ); + if( nEq==0 && (pLoop->wsFlags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ) return; + sqlite3StrAccumAppend(pStr, " (", 2); + for(i=0; i=nSkip ){ + explainAppendTerm(pStr, i, z, "="); + }else{ + if( i ) sqlite3StrAccumAppend(pStr, " AND ", 5); + sqlite3XPrintf(pStr, 0, "ANY(%s)", z); + } + } - if( p ){ - sqlite3ExpirePreparedStatements(db); - do { - VTable *pNext = p->pNext; - sqlite3VtabUnlock(p); - p = pNext; - }while( p ); + j = i; + if( pLoop->wsFlags&WHERE_BTM_LIMIT ){ + char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName; + explainAppendTerm(pStr, i++, z, ">"); } + if( pLoop->wsFlags&WHERE_TOP_LIMIT ){ + char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName; + explainAppendTerm(pStr, i, z, "<"); + } + sqlite3StrAccumAppend(pStr, ")", 1); } /* -** Clear any and all virtual-table information from the Table record. -** This routine is called, for example, just before deleting the Table -** record. -** -** Since it is a virtual-table, the Table structure contains a pointer -** to the head of a linked list of VTable structures. Each VTable -** structure is associated with a single sqlite3* user of the schema. -** The reference count of the VTable structure associated with database -** connection db is decremented immediately (which may lead to the -** structure being xDisconnected and free). Any other VTable structures -** in the list are moved to the sqlite3.pDisconnect list of the associated -** database connection. +** This function is a no-op unless currently processing an EXPLAIN QUERY PLAN +** command. If the query being compiled is an EXPLAIN QUERY PLAN, a single +** record is added to the output to describe the table scan strategy in +** pLevel. */ -SQLITE_PRIVATE void sqlite3VtabClear(sqlite3 *db, Table *p){ - if( !db || db->pnBytesFreed==0 ) vtabDisconnectAll(0, p); - if( p->azModuleArg ){ - int i; - for(i=0; inModuleArg; i++){ - sqlite3DbFree(db, p->azModuleArg[i]); +static void explainOneScan( + Parse *pParse, /* Parse context */ + SrcList *pTabList, /* Table list this loop refers to */ + WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ + int iLevel, /* Value for "level" column of output */ + int iFrom, /* Value for "from" column of output */ + u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ +){ +#ifndef SQLITE_DEBUG + if( pParse->explain==2 ) +#endif + { + struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom]; + Vdbe *v = pParse->pVdbe; /* VM being constructed */ + sqlite3 *db = pParse->db; /* Database handle */ + int iId = pParse->iSelectId; /* Select id (left-most output column) */ + int isSearch; /* True for a SEARCH. False for SCAN. */ + WhereLoop *pLoop; /* The controlling WhereLoop object */ + u32 flags; /* Flags that describe this loop */ + char *zMsg; /* Text to add to EQP output */ + StrAccum str; /* EQP output string */ + char zBuf[100]; /* Initial space for EQP output string */ + + pLoop = pLevel->pWLoop; + flags = pLoop->wsFlags; + if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_ONETABLE_ONLY) ) return; + + isSearch = (flags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))!=0 + || ((flags&WHERE_VIRTUALTABLE)==0 && (pLoop->u.btree.nEq>0)) + || (wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX)); + + sqlite3StrAccumInit(&str, zBuf, sizeof(zBuf), SQLITE_MAX_LENGTH); + str.db = db; + sqlite3StrAccumAppendAll(&str, isSearch ? "SEARCH" : "SCAN"); + if( pItem->pSelect ){ + sqlite3XPrintf(&str, 0, " SUBQUERY %d", pItem->iSelectId); + }else{ + sqlite3XPrintf(&str, 0, " TABLE %s", pItem->zName); } - sqlite3DbFree(db, p->azModuleArg); - } -} -/* -** Add a new module argument to pTable->azModuleArg[]. -** The string is not copied - the pointer is stored. The -** string will be freed automatically when the table is -** deleted. -*/ -static void addModuleArgument(sqlite3 *db, Table *pTable, char *zArg){ - int i = pTable->nModuleArg++; - int nBytes = sizeof(char *)*(1+pTable->nModuleArg); - char **azModuleArg; - azModuleArg = sqlite3DbRealloc(db, pTable->azModuleArg, nBytes); - if( azModuleArg==0 ){ - int j; - for(j=0; jazModuleArg[j]); + if( pItem->zAlias ){ + sqlite3XPrintf(&str, 0, " AS %s", pItem->zAlias); } - sqlite3DbFree(db, zArg); - sqlite3DbFree(db, pTable->azModuleArg); - pTable->nModuleArg = 0; - }else{ - azModuleArg[i] = zArg; - azModuleArg[i+1] = 0; + if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){ + const char *zFmt = 0; + Index *pIdx; + + assert( pLoop->u.btree.pIndex!=0 ); + pIdx = pLoop->u.btree.pIndex; + assert( !(flags&WHERE_AUTO_INDEX) || (flags&WHERE_IDX_ONLY) ); + if( !HasRowid(pItem->pTab) && IsPrimaryKeyIndex(pIdx) ){ + if( isSearch ){ + zFmt = "PRIMARY KEY"; + } + }else if( flags & WHERE_AUTO_INDEX ){ + zFmt = "AUTOMATIC COVERING INDEX"; + }else if( flags & WHERE_IDX_ONLY ){ + zFmt = "COVERING INDEX %s"; + }else{ + zFmt = "INDEX %s"; + } + if( zFmt ){ + sqlite3StrAccumAppend(&str, " USING ", 7); + sqlite3XPrintf(&str, 0, zFmt, pIdx->zName); + explainIndexRange(&str, pLoop, pItem->pTab); + } + }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){ + const char *zRange; + if( flags&(WHERE_COLUMN_EQ|WHERE_COLUMN_IN) ){ + zRange = "(rowid=?)"; + }else if( (flags&WHERE_BOTH_LIMIT)==WHERE_BOTH_LIMIT ){ + zRange = "(rowid>? AND rowid?)"; + }else{ + assert( flags&WHERE_TOP_LIMIT); + zRange = "(rowidu.vtab.idxNum, pLoop->u.vtab.idxStr); + } +#endif +#ifdef SQLITE_EXPLAIN_ESTIMATED_ROWS + if( pLoop->nOut>=10 ){ + sqlite3XPrintf(&str, 0, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut)); + }else{ + sqlite3StrAccumAppend(&str, " (~1 row)", 9); + } +#endif + zMsg = sqlite3StrAccumFinish(&str); + sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg, P4_DYNAMIC); } - pTable->azModuleArg = azModuleArg; } +#else +# define explainOneScan(u,v,w,x,y,z) +#endif /* SQLITE_OMIT_EXPLAIN */ + /* -** The parser calls this routine when it first sees a CREATE VIRTUAL TABLE -** statement. The module name has been parsed, but the optional list -** of parameters that follow the module name are still pending. +** Generate code for the start of the iLevel-th loop in the WHERE clause +** implementation described by pWInfo. */ -SQLITE_PRIVATE void sqlite3VtabBeginParse( - Parse *pParse, /* Parsing context */ - Token *pName1, /* Name of new table, or database name */ - Token *pName2, /* Name of new table or NULL */ - Token *pModuleName /* Name of the module for the virtual table */ +static Bitmask codeOneLoopStart( + WhereInfo *pWInfo, /* Complete information about the WHERE clause */ + int iLevel, /* Which level of pWInfo->a[] should be coded */ + Bitmask notReady /* Which tables are currently available */ ){ - int iDb; /* The database the table is being created in */ - Table *pTable; /* The new virtual table */ - sqlite3 *db; /* Database connection */ - - sqlite3StartTable(pParse, pName1, pName2, 0, 0, 1, 0); - pTable = pParse->pNewTable; - if( pTable==0 ) return; - assert( 0==pTable->pIndex ); + int j, k; /* Loop counters */ + int iCur; /* The VDBE cursor for the table */ + int addrNxt; /* Where to jump to continue with the next IN case */ + int omitTable; /* True if we use the index only */ + int bRev; /* True if we need to scan in reverse order */ + WhereLevel *pLevel; /* The where level to be coded */ + WhereLoop *pLoop; /* The WhereLoop object being coded */ + WhereClause *pWC; /* Decomposition of the entire WHERE clause */ + WhereTerm *pTerm; /* A WHERE clause term */ + Parse *pParse; /* Parsing context */ + sqlite3 *db; /* Database connection */ + Vdbe *v; /* The prepared stmt under constructions */ + struct SrcList_item *pTabItem; /* FROM clause term being coded */ + int addrBrk; /* Jump here to break out of the loop */ + int addrCont; /* Jump here to continue with next cycle */ + int iRowidReg = 0; /* Rowid is stored in this register, if not zero */ + int iReleaseReg = 0; /* Temp register to free before returning */ + pParse = pWInfo->pParse; + v = pParse->pVdbe; + pWC = &pWInfo->sWC; db = pParse->db; - iDb = sqlite3SchemaToIndex(db, pTable->pSchema); - assert( iDb>=0 ); - - pTable->tabFlags |= TF_Virtual; - pTable->nModuleArg = 0; - addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName)); - addModuleArgument(db, pTable, sqlite3DbStrDup(db, db->aDb[iDb].zName)); - addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName)); - pParse->sNameToken.n = (int)(&pModuleName->z[pModuleName->n] - pName1->z); + pLevel = &pWInfo->a[iLevel]; + pLoop = pLevel->pWLoop; + pTabItem = &pWInfo->pTabList->a[pLevel->iFrom]; + iCur = pTabItem->iCursor; + pLevel->notReady = notReady & ~getMask(&pWInfo->sMaskSet, iCur); + bRev = (pWInfo->revMask>>iLevel)&1; + omitTable = (pLoop->wsFlags & WHERE_IDX_ONLY)!=0 + && (pWInfo->wctrlFlags & WHERE_FORCE_TABLE)==0; + VdbeModuleComment((v, "Begin WHERE-loop%d: %s",iLevel,pTabItem->pTab->zName)); -#ifndef SQLITE_OMIT_AUTHORIZATION - /* Creating a virtual table invokes the authorization callback twice. - ** The first invocation, to obtain permission to INSERT a row into the - ** sqlite_master table, has already been made by sqlite3StartTable(). - ** The second call, to obtain permission to create the table, is made now. + /* Create labels for the "break" and "continue" instructions + ** for the current loop. Jump to addrBrk to break out of a loop. + ** Jump to cont to go immediately to the next iteration of the + ** loop. + ** + ** When there is an IN operator, we also have a "addrNxt" label that + ** means to continue with the next IN value combination. When + ** there are no IN operators in the constraints, the "addrNxt" label + ** is the same as "addrBrk". */ - if( pTable->azModuleArg ){ - sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName, - pTable->azModuleArg[0], pParse->db->aDb[iDb].zName); - } -#endif -} + addrBrk = pLevel->addrBrk = pLevel->addrNxt = sqlite3VdbeMakeLabel(v); + addrCont = pLevel->addrCont = sqlite3VdbeMakeLabel(v); -/* -** This routine takes the module argument that has been accumulating -** in pParse->zArg[] and appends it to the list of arguments on the -** virtual table currently under construction in pParse->pTable. -*/ -static void addArgumentToVtab(Parse *pParse){ - if( pParse->sArg.z && ALWAYS(pParse->pNewTable) ){ - const char *z = (const char*)pParse->sArg.z; - int n = pParse->sArg.n; - sqlite3 *db = pParse->db; - addModuleArgument(db, pParse->pNewTable, sqlite3DbStrNDup(db, z, n)); + /* If this is the right table of a LEFT OUTER JOIN, allocate and + ** initialize a memory cell that records if this table matches any + ** row of the left table of the join. + */ + if( pLevel->iFrom>0 && (pTabItem[0].jointype & JT_LEFT)!=0 ){ + pLevel->iLeftJoin = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin); + VdbeComment((v, "init LEFT JOIN no-match flag")); } -} -/* -** The parser calls this routine after the CREATE VIRTUAL TABLE statement -** has been completely parsed. -*/ -SQLITE_PRIVATE void sqlite3VtabFinishParse(Parse *pParse, Token *pEnd){ - Table *pTab = pParse->pNewTable; /* The table being constructed */ - sqlite3 *db = pParse->db; /* The database connection */ + /* Special case of a FROM clause subquery implemented as a co-routine */ + if( pTabItem->viaCoroutine ){ + int regYield = pTabItem->regReturn; + sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, pTabItem->addrFillSub); + pLevel->p2 = sqlite3VdbeAddOp2(v, OP_Yield, regYield, addrBrk); + VdbeCoverage(v); + VdbeComment((v, "next row of \"%s\"", pTabItem->pTab->zName)); + pLevel->op = OP_Goto; + }else - if( pTab==0 ) return; - addArgumentToVtab(pParse); - pParse->sArg.z = 0; - if( pTab->nModuleArg<1 ) return; - - /* If the CREATE VIRTUAL TABLE statement is being entered for the - ** first time (in other words if the virtual table is actually being - ** created now instead of just being read out of sqlite_master) then - ** do additional initialization work and store the statement text - ** in the sqlite_master table. - */ - if( !db->init.busy ){ - char *zStmt; - char *zWhere; - int iDb; - Vdbe *v; +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)!=0 ){ + /* Case 1: The table is a virtual-table. Use the VFilter and VNext + ** to access the data. + */ + int iReg; /* P3 Value for OP_VFilter */ + int addrNotFound; + int nConstraint = pLoop->nLTerm; - /* Compute the complete text of the CREATE VIRTUAL TABLE statement */ - if( pEnd ){ - pParse->sNameToken.n = (int)(pEnd->z - pParse->sNameToken.z) + pEnd->n; + sqlite3ExprCachePush(pParse); + iReg = sqlite3GetTempRange(pParse, nConstraint+2); + addrNotFound = pLevel->addrBrk; + for(j=0; jaLTerm[j]; + if( pTerm==0 ) continue; + if( pTerm->eOperator & WO_IN ){ + codeEqualityTerm(pParse, pTerm, pLevel, j, bRev, iTarget); + addrNotFound = pLevel->addrNxt; + }else{ + sqlite3ExprCode(pParse, pTerm->pExpr->pRight, iTarget); + } } - zStmt = sqlite3MPrintf(db, "CREATE VIRTUAL TABLE %T", &pParse->sNameToken); + sqlite3VdbeAddOp2(v, OP_Integer, pLoop->u.vtab.idxNum, iReg); + sqlite3VdbeAddOp2(v, OP_Integer, nConstraint, iReg+1); + sqlite3VdbeAddOp4(v, OP_VFilter, iCur, addrNotFound, iReg, + pLoop->u.vtab.idxStr, + pLoop->u.vtab.needFree ? P4_MPRINTF : P4_STATIC); + VdbeCoverage(v); + pLoop->u.vtab.needFree = 0; + for(j=0; ju.vtab.omitMask>>j)&1 ){ + disableTerm(pLevel, pLoop->aLTerm[j]); + } + } + pLevel->op = OP_VNext; + pLevel->p1 = iCur; + pLevel->p2 = sqlite3VdbeCurrentAddr(v); + sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2); + sqlite3ExprCachePop(pParse); + }else +#endif /* SQLITE_OMIT_VIRTUALTABLE */ - /* A slot for the record has already been allocated in the - ** SQLITE_MASTER table. We just need to update that slot with all - ** the information we've collected. - ** - ** The VM register number pParse->regRowid holds the rowid of an - ** entry in the sqlite_master table tht was created for this vtab - ** by sqlite3StartTable(). + if( (pLoop->wsFlags & WHERE_IPK)!=0 + && (pLoop->wsFlags & (WHERE_COLUMN_IN|WHERE_COLUMN_EQ))!=0 + ){ + /* Case 2: We can directly reference a single row using an + ** equality comparison against the ROWID field. Or + ** we reference multiple rows using a "rowid IN (...)" + ** construct. */ - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - sqlite3NestedParse(pParse, - "UPDATE %Q.%s " - "SET type='table', name=%Q, tbl_name=%Q, rootpage=0, sql=%Q " - "WHERE rowid=#%d", - db->aDb[iDb].zName, SCHEMA_TABLE(iDb), - pTab->zName, - pTab->zName, - zStmt, - pParse->regRowid - ); - sqlite3DbFree(db, zStmt); - v = sqlite3GetVdbe(pParse); - sqlite3ChangeCookie(pParse, iDb); - - sqlite3VdbeAddOp2(v, OP_Expire, 0, 0); - zWhere = sqlite3MPrintf(db, "name='%q' AND type='table'", pTab->zName); - sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere); - sqlite3VdbeAddOp4(v, OP_VCreate, iDb, 0, 0, - pTab->zName, sqlite3Strlen30(pTab->zName) + 1); - } + assert( pLoop->u.btree.nEq==1 ); + pTerm = pLoop->aLTerm[0]; + assert( pTerm!=0 ); + assert( pTerm->pExpr!=0 ); + assert( omitTable==0 ); + testcase( pTerm->wtFlags & TERM_VIRTUAL ); + iReleaseReg = ++pParse->nMem; + iRowidReg = codeEqualityTerm(pParse, pTerm, pLevel, 0, bRev, iReleaseReg); + if( iRowidReg!=iReleaseReg ) sqlite3ReleaseTempReg(pParse, iReleaseReg); + addrNxt = pLevel->addrNxt; + sqlite3VdbeAddOp2(v, OP_MustBeInt, iRowidReg, addrNxt); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addrNxt, iRowidReg); + VdbeCoverage(v); + sqlite3ExprCacheAffinityChange(pParse, iRowidReg, 1); + sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); + VdbeComment((v, "pk")); + pLevel->op = OP_Noop; + }else if( (pLoop->wsFlags & WHERE_IPK)!=0 + && (pLoop->wsFlags & WHERE_COLUMN_RANGE)!=0 + ){ + /* Case 3: We have an inequality comparison against the ROWID field. + */ + int testOp = OP_Noop; + int start; + int memEndValue = 0; + WhereTerm *pStart, *pEnd; - /* If we are rereading the sqlite_master table create the in-memory - ** record of the table. The xConnect() method is not called until - ** the first time the virtual table is used in an SQL statement. This - ** allows a schema that contains virtual tables to be loaded before - ** the required virtual table implementations are registered. */ - else { - Table *pOld; - Schema *pSchema = pTab->pSchema; - const char *zName = pTab->zName; - int nName = sqlite3Strlen30(zName); - assert( sqlite3SchemaMutexHeld(db, 0, pSchema) ); - pOld = sqlite3HashInsert(&pSchema->tblHash, zName, nName, pTab); - if( pOld ){ - db->mallocFailed = 1; - assert( pTab==pOld ); /* Malloc must have failed inside HashInsert() */ - return; + assert( omitTable==0 ); + j = 0; + pStart = pEnd = 0; + if( pLoop->wsFlags & WHERE_BTM_LIMIT ) pStart = pLoop->aLTerm[j++]; + if( pLoop->wsFlags & WHERE_TOP_LIMIT ) pEnd = pLoop->aLTerm[j++]; + assert( pStart!=0 || pEnd!=0 ); + if( bRev ){ + pTerm = pStart; + pStart = pEnd; + pEnd = pTerm; } - pParse->pNewTable = 0; - } -} - -/* -** The parser calls this routine when it sees the first token -** of an argument to the module name in a CREATE VIRTUAL TABLE statement. -*/ -SQLITE_PRIVATE void sqlite3VtabArgInit(Parse *pParse){ - addArgumentToVtab(pParse); - pParse->sArg.z = 0; - pParse->sArg.n = 0; -} - -/* -** The parser calls this routine for each token after the first token -** in an argument to the module name in a CREATE VIRTUAL TABLE statement. -*/ -SQLITE_PRIVATE void sqlite3VtabArgExtend(Parse *pParse, Token *p){ - Token *pArg = &pParse->sArg; - if( pArg->z==0 ){ - pArg->z = p->z; - pArg->n = p->n; - }else{ - assert(pArg->z < p->z); - pArg->n = (int)(&p->z[p->n] - pArg->z); - } -} - -/* -** Invoke a virtual table constructor (either xCreate or xConnect). The -** pointer to the function to invoke is passed as the fourth parameter -** to this procedure. -*/ -static int vtabCallConstructor( - sqlite3 *db, - Table *pTab, - Module *pMod, - int (*xConstruct)(sqlite3*,void*,int,const char*const*,sqlite3_vtab**,char**), - char **pzErr -){ - VtabCtx sCtx; - VTable *pVTable; - int rc; - const char *const*azArg = (const char *const*)pTab->azModuleArg; - int nArg = pTab->nModuleArg; - char *zErr = 0; - char *zModuleName = sqlite3MPrintf(db, "%s", pTab->zName); + if( pStart ){ + Expr *pX; /* The expression that defines the start bound */ + int r1, rTemp; /* Registers for holding the start boundary */ - if( !zModuleName ){ - return SQLITE_NOMEM; - } + /* The following constant maps TK_xx codes into corresponding + ** seek opcodes. It depends on a particular ordering of TK_xx + */ + const u8 aMoveOp[] = { + /* TK_GT */ OP_SeekGT, + /* TK_LE */ OP_SeekLE, + /* TK_LT */ OP_SeekLT, + /* TK_GE */ OP_SeekGE + }; + assert( TK_LE==TK_GT+1 ); /* Make sure the ordering.. */ + assert( TK_LT==TK_GT+2 ); /* ... of the TK_xx values... */ + assert( TK_GE==TK_GT+3 ); /* ... is correcct. */ - pVTable = sqlite3DbMallocZero(db, sizeof(VTable)); - if( !pVTable ){ - sqlite3DbFree(db, zModuleName); - return SQLITE_NOMEM; - } - pVTable->db = db; - pVTable->pMod = pMod; + assert( (pStart->wtFlags & TERM_VNULL)==0 ); + testcase( pStart->wtFlags & TERM_VIRTUAL ); + pX = pStart->pExpr; + assert( pX!=0 ); + testcase( pStart->leftCursor!=iCur ); /* transitive constraints */ + r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp); + sqlite3VdbeAddOp3(v, aMoveOp[pX->op-TK_GT], iCur, addrBrk, r1); + VdbeComment((v, "pk")); + VdbeCoverageIf(v, pX->op==TK_GT); + VdbeCoverageIf(v, pX->op==TK_LE); + VdbeCoverageIf(v, pX->op==TK_LT); + VdbeCoverageIf(v, pX->op==TK_GE); + sqlite3ExprCacheAffinityChange(pParse, r1, 1); + sqlite3ReleaseTempReg(pParse, rTemp); + disableTerm(pLevel, pStart); + }else{ + sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk); + VdbeCoverageIf(v, bRev==0); + VdbeCoverageIf(v, bRev!=0); + } + if( pEnd ){ + Expr *pX; + pX = pEnd->pExpr; + assert( pX!=0 ); + assert( (pEnd->wtFlags & TERM_VNULL)==0 ); + testcase( pEnd->leftCursor!=iCur ); /* Transitive constraints */ + testcase( pEnd->wtFlags & TERM_VIRTUAL ); + memEndValue = ++pParse->nMem; + sqlite3ExprCode(pParse, pX->pRight, memEndValue); + if( pX->op==TK_LT || pX->op==TK_GT ){ + testOp = bRev ? OP_Le : OP_Ge; + }else{ + testOp = bRev ? OP_Lt : OP_Gt; + } + disableTerm(pLevel, pEnd); + } + start = sqlite3VdbeCurrentAddr(v); + pLevel->op = bRev ? OP_Prev : OP_Next; + pLevel->p1 = iCur; + pLevel->p2 = start; + assert( pLevel->p5==0 ); + if( testOp!=OP_Noop ){ + iRowidReg = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Rowid, iCur, iRowidReg); + sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); + sqlite3VdbeAddOp3(v, testOp, memEndValue, addrBrk, iRowidReg); + VdbeCoverageIf(v, testOp==OP_Le); + VdbeCoverageIf(v, testOp==OP_Lt); + VdbeCoverageIf(v, testOp==OP_Ge); + VdbeCoverageIf(v, testOp==OP_Gt); + sqlite3VdbeChangeP5(v, SQLITE_AFF_NUMERIC | SQLITE_JUMPIFNULL); + } + }else if( pLoop->wsFlags & WHERE_INDEXED ){ + /* Case 4: A scan using an index. + ** + ** The WHERE clause may contain zero or more equality + ** terms ("==" or "IN" operators) that refer to the N + ** left-most columns of the index. It may also contain + ** inequality constraints (>, <, >= or <=) on the indexed + ** column that immediately follows the N equalities. Only + ** the right-most column can be an inequality - the rest must + ** use the "==" and "IN" operators. For example, if the + ** index is on (x,y,z), then the following clauses are all + ** optimized: + ** + ** x=5 + ** x=5 AND y=10 + ** x=5 AND y<10 + ** x=5 AND y>5 AND y<10 + ** x=5 AND y=5 AND z<=10 + ** + ** The z<10 term of the following cannot be used, only + ** the x=5 term: + ** + ** x=5 AND z<10 + ** + ** N may be zero if there are inequality constraints. + ** If there are no inequality constraints, then N is at + ** least one. + ** + ** This case is also used when there are no WHERE clause + ** constraints but an index is selected anyway, in order + ** to force the output order to conform to an ORDER BY. + */ + static const u8 aStartOp[] = { + 0, + 0, + OP_Rewind, /* 2: (!start_constraints && startEq && !bRev) */ + OP_Last, /* 3: (!start_constraints && startEq && bRev) */ + OP_SeekGT, /* 4: (start_constraints && !startEq && !bRev) */ + OP_SeekLT, /* 5: (start_constraints && !startEq && bRev) */ + OP_SeekGE, /* 6: (start_constraints && startEq && !bRev) */ + OP_SeekLE /* 7: (start_constraints && startEq && bRev) */ + }; + static const u8 aEndOp[] = { + OP_IdxGE, /* 0: (end_constraints && !bRev && !endEq) */ + OP_IdxGT, /* 1: (end_constraints && !bRev && endEq) */ + OP_IdxLE, /* 2: (end_constraints && bRev && !endEq) */ + OP_IdxLT, /* 3: (end_constraints && bRev && endEq) */ + }; + u16 nEq = pLoop->u.btree.nEq; /* Number of == or IN terms */ + int regBase; /* Base register holding constraint values */ + WhereTerm *pRangeStart = 0; /* Inequality constraint at range start */ + WhereTerm *pRangeEnd = 0; /* Inequality constraint at range end */ + int startEq; /* True if range start uses ==, >= or <= */ + int endEq; /* True if range end uses ==, >= or <= */ + int start_constraints; /* Start of range is constrained */ + int nConstraint; /* Number of constraint terms */ + Index *pIdx; /* The index we will be using */ + int iIdxCur; /* The VDBE cursor for the index */ + int nExtraReg = 0; /* Number of extra registers needed */ + int op; /* Instruction opcode */ + char *zStartAff; /* Affinity for start of range constraint */ + char cEndAff = 0; /* Affinity for end of range constraint */ + u8 bSeekPastNull = 0; /* True to seek past initial nulls */ + u8 bStopAtNull = 0; /* Add condition to terminate at NULLs */ - /* Invoke the virtual table constructor */ - assert( &db->pVtabCtx ); - assert( xConstruct ); - sCtx.pTab = pTab; - sCtx.pVTable = pVTable; - db->pVtabCtx = &sCtx; - rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVTable->pVtab, &zErr); - db->pVtabCtx = 0; - if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; + pIdx = pLoop->u.btree.pIndex; + iIdxCur = pLevel->iIdxCur; + assert( nEq>=pLoop->u.btree.nSkip ); - if( SQLITE_OK!=rc ){ - if( zErr==0 ){ - *pzErr = sqlite3MPrintf(db, "vtable constructor failed: %s", zModuleName); - }else { - *pzErr = sqlite3MPrintf(db, "%s", zErr); - sqlite3_free(zErr); + /* If this loop satisfies a sort order (pOrderBy) request that + ** was passed to this function to implement a "SELECT min(x) ..." + ** query, then the caller will only allow the loop to run for + ** a single iteration. This means that the first row returned + ** should not have a NULL value stored in 'x'. If column 'x' is + ** the first one after the nEq equality constraints in the index, + ** this requires some special handling. + */ + assert( pWInfo->pOrderBy==0 + || pWInfo->pOrderBy->nExpr==1 + || (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0 ); + if( (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)!=0 + && pWInfo->nOBSat>0 + && (pIdx->nKeyCol>nEq) + ){ + assert( pLoop->u.btree.nSkip==0 ); + bSeekPastNull = 1; + nExtraReg = 1; } - sqlite3DbFree(db, pVTable); - }else if( ALWAYS(pVTable->pVtab) ){ - /* Justification of ALWAYS(): A correct vtab constructor must allocate - ** the sqlite3_vtab object if successful. */ - pVTable->pVtab->pModule = pMod->pModule; - pVTable->nRef = 1; - if( sCtx.pTab ){ - const char *zFormat = "vtable constructor did not declare schema: %s"; - *pzErr = sqlite3MPrintf(db, zFormat, pTab->zName); - sqlite3VtabUnlock(pVTable); - rc = SQLITE_ERROR; - }else{ - int iCol; - /* If everything went according to plan, link the new VTable structure - ** into the linked list headed by pTab->pVTable. Then loop through the - ** columns of the table to see if any of them contain the token "hidden". - ** If so, set the Column.isHidden flag and remove the token from - ** the type string. */ - pVTable->pNext = pTab->pVTable; - pTab->pVTable = pVTable; - for(iCol=0; iColnCol; iCol++){ - char *zType = pTab->aCol[iCol].zType; - int nType; - int i = 0; - if( !zType ) continue; - nType = sqlite3Strlen30(zType); - if( sqlite3StrNICmp("hidden", zType, 6)||(zType[6] && zType[6]!=' ') ){ - for(i=0; i0 ){ - assert(zType[i-1]==' '); - zType[i-1] = '\0'; - } - pTab->aCol[iCol].isHidden = 1; - } + /* Find any inequality constraint terms for the start and end + ** of the range. + */ + j = nEq; + if( pLoop->wsFlags & WHERE_BTM_LIMIT ){ + pRangeStart = pLoop->aLTerm[j++]; + nExtraReg = 1; + } + if( pLoop->wsFlags & WHERE_TOP_LIMIT ){ + pRangeEnd = pLoop->aLTerm[j++]; + nExtraReg = 1; + if( pRangeStart==0 + && (j = pIdx->aiColumn[nEq])>=0 + && pIdx->pTable->aCol[j].notNull==0 + ){ + bSeekPastNull = 1; } } - } - - sqlite3DbFree(db, zModuleName); - return rc; -} - -/* -** This function is invoked by the parser to call the xConnect() method -** of the virtual table pTab. If an error occurs, an error code is returned -** and an error left in pParse. -** -** This call is a no-op if table pTab is not a virtual table. -*/ -SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse *pParse, Table *pTab){ - sqlite3 *db = pParse->db; - const char *zMod; - Module *pMod; - int rc; - - assert( pTab ); - if( (pTab->tabFlags & TF_Virtual)==0 || sqlite3GetVTable(db, pTab) ){ - return SQLITE_OK; - } + assert( pRangeEnd==0 || (pRangeEnd->wtFlags & TERM_VNULL)==0 ); - /* Locate the required virtual table module */ - zMod = pTab->azModuleArg[0]; - pMod = (Module*)sqlite3HashFind(&db->aModule, zMod, sqlite3Strlen30(zMod)); + /* Generate code to evaluate all constraint terms using == or IN + ** and store the values of those terms in an array of registers + ** starting at regBase. + */ + regBase = codeAllEqualityTerms(pParse,pLevel,bRev,nExtraReg,&zStartAff); + assert( zStartAff==0 || sqlite3Strlen30(zStartAff)>=nEq ); + if( zStartAff ) cEndAff = zStartAff[nEq]; + addrNxt = pLevel->addrNxt; - if( !pMod ){ - const char *zModule = pTab->azModuleArg[0]; - sqlite3ErrorMsg(pParse, "no such module: %s", zModule); - rc = SQLITE_ERROR; - }else{ - char *zErr = 0; - rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xConnect, &zErr); - if( rc!=SQLITE_OK ){ - sqlite3ErrorMsg(pParse, "%s", zErr); + /* If we are doing a reverse order scan on an ascending index, or + ** a forward order scan on a descending index, interchange the + ** start and end terms (pRangeStart and pRangeEnd). + */ + if( (nEqnKeyCol && bRev==(pIdx->aSortOrder[nEq]==SQLITE_SO_ASC)) + || (bRev && pIdx->nKeyCol==nEq) + ){ + SWAP(WhereTerm *, pRangeEnd, pRangeStart); + SWAP(u8, bSeekPastNull, bStopAtNull); } - sqlite3DbFree(db, zErr); - } - return rc; -} -/* -** Grow the db->aVTrans[] array so that there is room for at least one -** more v-table. Return SQLITE_NOMEM if a malloc fails, or SQLITE_OK otherwise. -*/ -static int growVTrans(sqlite3 *db){ - const int ARRAY_INCR = 5; + testcase( pRangeStart && (pRangeStart->eOperator & WO_LE)!=0 ); + testcase( pRangeStart && (pRangeStart->eOperator & WO_GE)!=0 ); + testcase( pRangeEnd && (pRangeEnd->eOperator & WO_LE)!=0 ); + testcase( pRangeEnd && (pRangeEnd->eOperator & WO_GE)!=0 ); + startEq = !pRangeStart || pRangeStart->eOperator & (WO_LE|WO_GE); + endEq = !pRangeEnd || pRangeEnd->eOperator & (WO_LE|WO_GE); + start_constraints = pRangeStart || nEq>0; - /* Grow the sqlite3.aVTrans array if required */ - if( (db->nVTrans%ARRAY_INCR)==0 ){ - VTable **aVTrans; - int nBytes = sizeof(sqlite3_vtab *) * (db->nVTrans + ARRAY_INCR); - aVTrans = sqlite3DbRealloc(db, (void *)db->aVTrans, nBytes); - if( !aVTrans ){ - return SQLITE_NOMEM; + /* Seek the index cursor to the start of the range. */ + nConstraint = nEq; + if( pRangeStart ){ + Expr *pRight = pRangeStart->pExpr->pRight; + sqlite3ExprCode(pParse, pRight, regBase+nEq); + if( (pRangeStart->wtFlags & TERM_VNULL)==0 + && sqlite3ExprCanBeNull(pRight) + ){ + sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt); + VdbeCoverage(v); + } + if( zStartAff ){ + if( sqlite3CompareAffinity(pRight, zStartAff[nEq])==SQLITE_AFF_NONE){ + /* Since the comparison is to be performed with no conversions + ** applied to the operands, set the affinity to apply to pRight to + ** SQLITE_AFF_NONE. */ + zStartAff[nEq] = SQLITE_AFF_NONE; + } + if( sqlite3ExprNeedsNoAffinityChange(pRight, zStartAff[nEq]) ){ + zStartAff[nEq] = SQLITE_AFF_NONE; + } + } + nConstraint++; + testcase( pRangeStart->wtFlags & TERM_VIRTUAL ); + }else if( bSeekPastNull ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq); + nConstraint++; + startEq = 0; + start_constraints = 1; } - memset(&aVTrans[db->nVTrans], 0, sizeof(sqlite3_vtab *)*ARRAY_INCR); - db->aVTrans = aVTrans; - } - - return SQLITE_OK; -} - -/* -** Add the virtual table pVTab to the array sqlite3.aVTrans[]. Space should -** have already been reserved using growVTrans(). -*/ -static void addToVTrans(sqlite3 *db, VTable *pVTab){ - /* Add pVtab to the end of sqlite3.aVTrans */ - db->aVTrans[db->nVTrans++] = pVTab; - sqlite3VtabLock(pVTab); -} - -/* -** This function is invoked by the vdbe to call the xCreate method -** of the virtual table named zTab in database iDb. -** -** If an error occurs, *pzErr is set to point an an English language -** description of the error and an SQLITE_XXX error code is returned. -** In this case the caller must call sqlite3DbFree(db, ) on *pzErr. -*/ -SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3 *db, int iDb, const char *zTab, char **pzErr){ - int rc = SQLITE_OK; - Table *pTab; - Module *pMod; - const char *zMod; - - pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName); - assert( pTab && (pTab->tabFlags & TF_Virtual)!=0 && !pTab->pVTable ); - - /* Locate the required virtual table module */ - zMod = pTab->azModuleArg[0]; - pMod = (Module*)sqlite3HashFind(&db->aModule, zMod, sqlite3Strlen30(zMod)); - - /* If the module has been registered and includes a Create method, - ** invoke it now. If the module has not been registered, return an - ** error. Otherwise, do nothing. - */ - if( !pMod ){ - *pzErr = sqlite3MPrintf(db, "no such module: %s", zMod); - rc = SQLITE_ERROR; - }else{ - rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xCreate, pzErr); - } + codeApplyAffinity(pParse, regBase, nConstraint - bSeekPastNull, zStartAff); + op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev]; + assert( op!=0 ); + sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint); + VdbeCoverage(v); + VdbeCoverageIf(v, op==OP_Rewind); testcase( op==OP_Rewind ); + VdbeCoverageIf(v, op==OP_Last); testcase( op==OP_Last ); + VdbeCoverageIf(v, op==OP_SeekGT); testcase( op==OP_SeekGT ); + VdbeCoverageIf(v, op==OP_SeekGE); testcase( op==OP_SeekGE ); + VdbeCoverageIf(v, op==OP_SeekLE); testcase( op==OP_SeekLE ); + VdbeCoverageIf(v, op==OP_SeekLT); testcase( op==OP_SeekLT ); - /* Justification of ALWAYS(): The xConstructor method is required to - ** create a valid sqlite3_vtab if it returns SQLITE_OK. */ - if( rc==SQLITE_OK && ALWAYS(sqlite3GetVTable(db, pTab)) ){ - rc = growVTrans(db); - if( rc==SQLITE_OK ){ - addToVTrans(db, sqlite3GetVTable(db, pTab)); + /* Load the value for the inequality constraint at the end of the + ** range (if any). + */ + nConstraint = nEq; + if( pRangeEnd ){ + Expr *pRight = pRangeEnd->pExpr->pRight; + sqlite3ExprCacheRemove(pParse, regBase+nEq, 1); + sqlite3ExprCode(pParse, pRight, regBase+nEq); + if( (pRangeEnd->wtFlags & TERM_VNULL)==0 + && sqlite3ExprCanBeNull(pRight) + ){ + sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt); + VdbeCoverage(v); + } + if( sqlite3CompareAffinity(pRight, cEndAff)!=SQLITE_AFF_NONE + && !sqlite3ExprNeedsNoAffinityChange(pRight, cEndAff) + ){ + codeApplyAffinity(pParse, regBase+nEq, 1, &cEndAff); + } + nConstraint++; + testcase( pRangeEnd->wtFlags & TERM_VIRTUAL ); + }else if( bStopAtNull ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq); + endEq = 0; + nConstraint++; } - } - - return rc; -} - -/* -** This function is used to set the schema of a virtual table. It is only -** valid to call this function from within the xCreate() or xConnect() of a -** virtual table module. -*/ -SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){ - Parse *pParse; + sqlite3DbFree(db, zStartAff); - int rc = SQLITE_OK; - Table *pTab; - char *zErr = 0; + /* Top of the loop body */ + pLevel->p2 = sqlite3VdbeCurrentAddr(v); - sqlite3_mutex_enter(db->mutex); - if( !db->pVtabCtx || !(pTab = db->pVtabCtx->pTab) ){ - sqlite3Error(db, SQLITE_MISUSE, 0); - sqlite3_mutex_leave(db->mutex); - return SQLITE_MISUSE_BKPT; - } - assert( (pTab->tabFlags & TF_Virtual)!=0 ); + /* Check if the index cursor is past the end of the range. */ + if( nConstraint ){ + op = aEndOp[bRev*2 + endEq]; + sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint); + testcase( op==OP_IdxGT ); VdbeCoverageIf(v, op==OP_IdxGT ); + testcase( op==OP_IdxGE ); VdbeCoverageIf(v, op==OP_IdxGE ); + testcase( op==OP_IdxLT ); VdbeCoverageIf(v, op==OP_IdxLT ); + testcase( op==OP_IdxLE ); VdbeCoverageIf(v, op==OP_IdxLE ); + } - pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); - if( pParse==0 ){ - rc = SQLITE_NOMEM; - }else{ - pParse->declareVtab = 1; - pParse->db = db; - pParse->nQueryLoop = 1; - - if( SQLITE_OK==sqlite3RunParser(pParse, zCreateTable, &zErr) - && pParse->pNewTable - && !db->mallocFailed - && !pParse->pNewTable->pSelect - && (pParse->pNewTable->tabFlags & TF_Virtual)==0 - ){ - if( !pTab->aCol ){ - pTab->aCol = pParse->pNewTable->aCol; - pTab->nCol = pParse->pNewTable->nCol; - pParse->pNewTable->nCol = 0; - pParse->pNewTable->aCol = 0; + /* Seek the table cursor, if required */ + disableTerm(pLevel, pRangeStart); + disableTerm(pLevel, pRangeEnd); + if( omitTable ){ + /* pIdx is a covering index. No need to access the main table. */ + }else if( HasRowid(pIdx->pTable) ){ + iRowidReg = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg); + sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); + sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg); /* Deferred seek */ + }else if( iCur!=iIdxCur ){ + Index *pPk = sqlite3PrimaryKeyIndex(pIdx->pTable); + iRowidReg = sqlite3GetTempRange(pParse, pPk->nKeyCol); + for(j=0; jnKeyCol; j++){ + k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[j]); + sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, k, iRowidReg+j); } - db->pVtabCtx->pTab = 0; + sqlite3VdbeAddOp4Int(v, OP_NotFound, iCur, addrCont, + iRowidReg, pPk->nKeyCol); VdbeCoverage(v); + } + + /* Record the instruction used to terminate the loop. Disable + ** WHERE clause terms made redundant by the index range scan. + */ + if( pLoop->wsFlags & WHERE_ONEROW ){ + pLevel->op = OP_Noop; + }else if( bRev ){ + pLevel->op = OP_Prev; }else{ - sqlite3Error(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); - sqlite3DbFree(db, zErr); - rc = SQLITE_ERROR; + pLevel->op = OP_Next; } - pParse->declareVtab = 0; - - if( pParse->pVdbe ){ - sqlite3VdbeFinalize(pParse->pVdbe); + pLevel->p1 = iIdxCur; + pLevel->p3 = (pLoop->wsFlags&WHERE_UNQ_WANTED)!=0 ? 1:0; + if( (pLoop->wsFlags & WHERE_CONSTRAINT)==0 ){ + pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; + }else{ + assert( pLevel->p5==0 ); } - sqlite3DeleteTable(db, pParse->pNewTable); - sqlite3StackFree(db, pParse); - } - - assert( (rc&0xff)==rc ); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; -} - -/* -** This function is invoked by the vdbe to call the xDestroy method -** of the virtual table named zTab in database iDb. This occurs -** when a DROP TABLE is mentioned. -** -** This call is a no-op if zTab is not a virtual table. -*/ -SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3 *db, int iDb, const char *zTab){ - int rc = SQLITE_OK; - Table *pTab; - - pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName); - if( ALWAYS(pTab!=0 && pTab->pVTable!=0) ){ - VTable *p = vtabDisconnectAll(db, pTab); - - assert( rc==SQLITE_OK ); - rc = p->pMod->pModule->xDestroy(p->pVtab); + }else - /* Remove the sqlite3_vtab* from the aVTrans[] array, if applicable */ - if( rc==SQLITE_OK ){ - assert( pTab->pVTable==p && p->pNext==0 ); - p->pVtab = 0; - pTab->pVTable = 0; - sqlite3VtabUnlock(p); - } - } +#ifndef SQLITE_OMIT_OR_OPTIMIZATION + if( pLoop->wsFlags & WHERE_MULTI_OR ){ + /* Case 5: Two or more separately indexed terms connected by OR + ** + ** Example: + ** + ** CREATE TABLE t1(a,b,c,d); + ** CREATE INDEX i1 ON t1(a); + ** CREATE INDEX i2 ON t1(b); + ** CREATE INDEX i3 ON t1(c); + ** + ** SELECT * FROM t1 WHERE a=5 OR b=7 OR (c=11 AND d=13) + ** + ** In the example, there are three indexed terms connected by OR. + ** The top of the loop looks like this: + ** + ** Null 1 # Zero the rowset in reg 1 + ** + ** Then, for each indexed term, the following. The arguments to + ** RowSetTest are such that the rowid of the current row is inserted + ** into the RowSet. If it is already present, control skips the + ** Gosub opcode and jumps straight to the code generated by WhereEnd(). + ** + ** sqlite3WhereBegin() + ** RowSetTest # Insert rowid into rowset + ** Gosub 2 A + ** sqlite3WhereEnd() + ** + ** Following the above, code to terminate the loop. Label A, the target + ** of the Gosub above, jumps to the instruction right after the Goto. + ** + ** Null 1 # Zero the rowset in reg 1 + ** Goto B # The loop is finished. + ** + ** A: # Return data, whatever. + ** + ** Return 2 # Jump back to the Gosub + ** + ** B: + ** + ** Added 2014-05-26: If the table is a WITHOUT ROWID table, then + ** use an ephemeral index instead of a RowSet to record the primary + ** keys of the rows we have already seen. + ** + */ + WhereClause *pOrWc; /* The OR-clause broken out into subterms */ + SrcList *pOrTab; /* Shortened table list or OR-clause generation */ + Index *pCov = 0; /* Potential covering index (or NULL) */ + int iCovCur = pParse->nTab++; /* Cursor used for index scans (if any) */ - return rc; -} + int regReturn = ++pParse->nMem; /* Register used with OP_Gosub */ + int regRowset = 0; /* Register for RowSet object */ + int regRowid = 0; /* Register holding rowid */ + int iLoopBody = sqlite3VdbeMakeLabel(v); /* Start of loop body */ + int iRetInit; /* Address of regReturn init */ + int untestedTerms = 0; /* Some terms not completely tested */ + int ii; /* Loop counter */ + u16 wctrlFlags; /* Flags for sub-WHERE clause */ + Expr *pAndExpr = 0; /* An ".. AND (...)" expression */ + Table *pTab = pTabItem->pTab; + + pTerm = pLoop->aLTerm[0]; + assert( pTerm!=0 ); + assert( pTerm->eOperator & WO_OR ); + assert( (pTerm->wtFlags & TERM_ORINFO)!=0 ); + pOrWc = &pTerm->u.pOrInfo->wc; + pLevel->op = OP_Return; + pLevel->p1 = regReturn; -/* -** This function invokes either the xRollback or xCommit method -** of each of the virtual tables in the sqlite3.aVTrans array. The method -** called is identified by the second argument, "offset", which is -** the offset of the method to call in the sqlite3_module structure. -** -** The array is cleared after invoking the callbacks. -*/ -static void callFinaliser(sqlite3 *db, int offset){ - int i; - if( db->aVTrans ){ - for(i=0; inVTrans; i++){ - VTable *pVTab = db->aVTrans[i]; - sqlite3_vtab *p = pVTab->pVtab; - if( p ){ - int (*x)(sqlite3_vtab *); - x = *(int (**)(sqlite3_vtab *))((char *)p->pModule + offset); - if( x ) x(p); + /* Set up a new SrcList in pOrTab containing the table being scanned + ** by this loop in the a[0] slot and all notReady tables in a[1..] slots. + ** This becomes the SrcList in the recursive call to sqlite3WhereBegin(). + */ + if( pWInfo->nLevel>1 ){ + int nNotReady; /* The number of notReady tables */ + struct SrcList_item *origSrc; /* Original list of tables */ + nNotReady = pWInfo->nLevel - iLevel - 1; + pOrTab = sqlite3StackAllocRaw(db, + sizeof(*pOrTab)+ nNotReady*sizeof(pOrTab->a[0])); + if( pOrTab==0 ) return notReady; + pOrTab->nAlloc = (u8)(nNotReady + 1); + pOrTab->nSrc = pOrTab->nAlloc; + memcpy(pOrTab->a, pTabItem, sizeof(*pTabItem)); + origSrc = pWInfo->pTabList->a; + for(k=1; k<=nNotReady; k++){ + memcpy(&pOrTab->a[k], &origSrc[pLevel[k].iFrom], sizeof(pOrTab->a[k])); } - pVTab->iSavepoint = 0; - sqlite3VtabUnlock(pVTab); + }else{ + pOrTab = pWInfo->pTabList; } - sqlite3DbFree(db, db->aVTrans); - db->nVTrans = 0; - db->aVTrans = 0; - } -} - -/* -** Invoke the xSync method of all virtual tables in the sqlite3.aVTrans -** array. Return the error code for the first error that occurs, or -** SQLITE_OK if all xSync operations are successful. -** -** Set *pzErrmsg to point to a buffer that should be released using -** sqlite3DbFree() containing an error message, if one is available. -*/ -SQLITE_PRIVATE int sqlite3VtabSync(sqlite3 *db, char **pzErrmsg){ - int i; - int rc = SQLITE_OK; - VTable **aVTrans = db->aVTrans; - db->aVTrans = 0; - for(i=0; rc==SQLITE_OK && inVTrans; i++){ - int (*x)(sqlite3_vtab *); - sqlite3_vtab *pVtab = aVTrans[i]->pVtab; - if( pVtab && (x = pVtab->pModule->xSync)!=0 ){ - rc = x(pVtab); - sqlite3DbFree(db, *pzErrmsg); - *pzErrmsg = sqlite3DbStrDup(db, pVtab->zErrMsg); - sqlite3_free(pVtab->zErrMsg); + /* Initialize the rowset register to contain NULL. An SQL NULL is + ** equivalent to an empty rowset. Or, create an ephemeral index + ** capable of holding primary keys in the case of a WITHOUT ROWID. + ** + ** Also initialize regReturn to contain the address of the instruction + ** immediately following the OP_Return at the bottom of the loop. This + ** is required in a few obscure LEFT JOIN cases where control jumps + ** over the top of the loop into the body of it. In this case the + ** correct response for the end-of-loop code (the OP_Return) is to + ** fall through to the next instruction, just as an OP_Next does if + ** called on an uninitialized cursor. + */ + if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ + if( HasRowid(pTab) ){ + regRowset = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + regRowset = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, regRowset, pPk->nKeyCol); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); + } + regRowid = ++pParse->nMem; } - } - db->aVTrans = aVTrans; - return rc; -} - -/* -** Invoke the xRollback method of all virtual tables in the -** sqlite3.aVTrans array. Then clear the array itself. -*/ -SQLITE_PRIVATE int sqlite3VtabRollback(sqlite3 *db){ - callFinaliser(db, offsetof(sqlite3_module,xRollback)); - return SQLITE_OK; -} + iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn); -/* -** Invoke the xCommit method of all virtual tables in the -** sqlite3.aVTrans array. Then clear the array itself. -*/ -SQLITE_PRIVATE int sqlite3VtabCommit(sqlite3 *db){ - callFinaliser(db, offsetof(sqlite3_module,xCommit)); - return SQLITE_OK; -} + /* If the original WHERE clause is z of the form: (x1 OR x2 OR ...) AND y + ** Then for every term xN, evaluate as the subexpression: xN AND z + ** That way, terms in y that are factored into the disjunction will + ** be picked up by the recursive calls to sqlite3WhereBegin() below. + ** + ** Actually, each subexpression is converted to "xN AND w" where w is + ** the "interesting" terms of z - terms that did not originate in the + ** ON or USING clause of a LEFT JOIN, and terms that are usable as + ** indices. + ** + ** This optimization also only applies if the (x1 OR x2 OR ...) term + ** is not contained in the ON clause of a LEFT JOIN. + ** See ticket http://www.sqlite.org/src/info/f2369304e4 + */ + if( pWC->nTerm>1 ){ + int iTerm; + for(iTerm=0; iTermnTerm; iTerm++){ + Expr *pExpr = pWC->a[iTerm].pExpr; + if( &pWC->a[iTerm] == pTerm ) continue; + if( ExprHasProperty(pExpr, EP_FromJoin) ) continue; + testcase( pWC->a[iTerm].wtFlags & TERM_ORINFO ); + testcase( pWC->a[iTerm].wtFlags & TERM_VIRTUAL ); + if( pWC->a[iTerm].wtFlags & (TERM_ORINFO|TERM_VIRTUAL) ) continue; + if( (pWC->a[iTerm].eOperator & WO_ALL)==0 ) continue; + pExpr = sqlite3ExprDup(db, pExpr, 0); + pAndExpr = sqlite3ExprAnd(db, pAndExpr, pExpr); + } + if( pAndExpr ){ + pAndExpr = sqlite3PExpr(pParse, TK_AND, 0, pAndExpr, 0); + } + } + + /* Run a separate WHERE clause for each term of the OR clause. After + ** eliminating duplicates from other WHERE clauses, the action for each + ** sub-WHERE clause is to to invoke the main loop body as a subroutine. + */ + wctrlFlags = WHERE_OMIT_OPEN_CLOSE + | WHERE_FORCE_TABLE + | WHERE_ONETABLE_ONLY; + for(ii=0; iinTerm; ii++){ + WhereTerm *pOrTerm = &pOrWc->a[ii]; + if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){ + WhereInfo *pSubWInfo; /* Info for single OR-term scan */ + Expr *pOrExpr = pOrTerm->pExpr; /* Current OR clause term */ + int j1 = 0; /* Address of jump operation */ + if( pAndExpr && !ExprHasProperty(pOrExpr, EP_FromJoin) ){ + pAndExpr->pLeft = pOrExpr; + pOrExpr = pAndExpr; + } + /* Loop through table entries that match term pOrTerm. */ + WHERETRACE(0xffff, ("Subplan for OR-clause:\n")); + pSubWInfo = sqlite3WhereBegin(pParse, pOrTab, pOrExpr, 0, 0, + wctrlFlags, iCovCur); + assert( pSubWInfo || pParse->nErr || db->mallocFailed ); + if( pSubWInfo ){ + WhereLoop *pSubLoop; + explainOneScan( + pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0 + ); + /* This is the sub-WHERE clause body. First skip over + ** duplicate rows from prior sub-WHERE clauses, and record the + ** rowid (or PRIMARY KEY) for the current row so that the same + ** row will be skipped in subsequent sub-WHERE clauses. + */ + if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ + int r; + int iSet = ((ii==pOrWc->nTerm-1)?-1:ii); + if( HasRowid(pTab) ){ + r = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iCur, regRowid, 0); + j1 = sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, 0, r,iSet); + VdbeCoverage(v); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + int nPk = pPk->nKeyCol; + int iPk; + + /* Read the PK into an array of temp registers. */ + r = sqlite3GetTempRange(pParse, nPk); + for(iPk=0; iPkaiColumn[iPk]; + sqlite3ExprCodeGetColumn(pParse, pTab, iCol, iCur, r+iPk, 0); + } -/* -** If the virtual table pVtab supports the transaction interface -** (xBegin/xRollback/xCommit and optionally xSync) and a transaction is -** not currently open, invoke the xBegin method now. -** -** If the xBegin call is successful, place the sqlite3_vtab pointer -** in the sqlite3.aVTrans array. -*/ -SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *db, VTable *pVTab){ - int rc = SQLITE_OK; - const sqlite3_module *pModule; + /* Check if the temp table already contains this key. If so, + ** the row has already been included in the result set and + ** can be ignored (by jumping past the Gosub below). Otherwise, + ** insert the key into the temp table and proceed with processing + ** the row. + ** + ** Use some of the same optimizations as OP_RowSetTest: If iSet + ** is zero, assume that the key cannot already be present in + ** the temp table. And if iSet is -1, assume that there is no + ** need to insert the key into the temp table, as it will never + ** be tested for. */ + if( iSet ){ + j1 = sqlite3VdbeAddOp4Int(v, OP_Found, regRowset, 0, r, nPk); + VdbeCoverage(v); + } + if( iSet>=0 ){ + sqlite3VdbeAddOp3(v, OP_MakeRecord, r, nPk, regRowid); + sqlite3VdbeAddOp3(v, OP_IdxInsert, regRowset, regRowid, 0); + if( iSet ) sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + } - /* Special case: If db->aVTrans is NULL and db->nVTrans is greater - ** than zero, then this function is being called from within a - ** virtual module xSync() callback. It is illegal to write to - ** virtual module tables in this case, so return SQLITE_LOCKED. - */ - if( sqlite3VtabInSync(db) ){ - return SQLITE_LOCKED; - } - if( !pVTab ){ - return SQLITE_OK; - } - pModule = pVTab->pVtab->pModule; + /* Release the array of temp registers */ + sqlite3ReleaseTempRange(pParse, r, nPk); + } + } - if( pModule->xBegin ){ - int i; + /* Invoke the main loop body as a subroutine */ + sqlite3VdbeAddOp2(v, OP_Gosub, regReturn, iLoopBody); - /* If pVtab is already in the aVTrans array, return early */ - for(i=0; inVTrans; i++){ - if( db->aVTrans[i]==pVTab ){ - return SQLITE_OK; - } - } + /* Jump here (skipping the main loop body subroutine) if the + ** current sub-WHERE row is a duplicate from prior sub-WHEREs. */ + if( j1 ) sqlite3VdbeJumpHere(v, j1); - /* Invoke the xBegin method. If successful, add the vtab to the - ** sqlite3.aVTrans[] array. */ - rc = growVTrans(db); - if( rc==SQLITE_OK ){ - rc = pModule->xBegin(pVTab->pVtab); - if( rc==SQLITE_OK ){ - addToVTrans(db, pVTab); - } - } - } - return rc; -} + /* The pSubWInfo->untestedTerms flag means that this OR term + ** contained one or more AND term from a notReady table. The + ** terms from the notReady table could not be tested and will + ** need to be tested later. + */ + if( pSubWInfo->untestedTerms ) untestedTerms = 1; -/* -** Invoke either the xSavepoint, xRollbackTo or xRelease method of all -** virtual tables that currently have an open transaction. Pass iSavepoint -** as the second argument to the virtual table method invoked. -** -** If op is SAVEPOINT_BEGIN, the xSavepoint method is invoked. If it is -** SAVEPOINT_ROLLBACK, the xRollbackTo method. Otherwise, if op is -** SAVEPOINT_RELEASE, then the xRelease method of each virtual table with -** an open transaction is invoked. -** -** If any virtual table method returns an error code other than SQLITE_OK, -** processing is abandoned and the error returned to the caller of this -** function immediately. If all calls to virtual table methods are successful, -** SQLITE_OK is returned. -*/ -SQLITE_PRIVATE int sqlite3VtabSavepoint(sqlite3 *db, int op, int iSavepoint){ - int rc = SQLITE_OK; + /* If all of the OR-connected terms are optimized using the same + ** index, and the index is opened using the same cursor number + ** by each call to sqlite3WhereBegin() made by this loop, it may + ** be possible to use that index as a covering index. + ** + ** If the call to sqlite3WhereBegin() above resulted in a scan that + ** uses an index, and this is either the first OR-connected term + ** processed or the index is the same as that used by all previous + ** terms, set pCov to the candidate covering index. Otherwise, set + ** pCov to NULL to indicate that no candidate covering index will + ** be available. + */ + pSubLoop = pSubWInfo->a[0].pWLoop; + assert( (pSubLoop->wsFlags & WHERE_AUTO_INDEX)==0 ); + if( (pSubLoop->wsFlags & WHERE_INDEXED)!=0 + && (ii==0 || pSubLoop->u.btree.pIndex==pCov) + && (HasRowid(pTab) || !IsPrimaryKeyIndex(pSubLoop->u.btree.pIndex)) + ){ + assert( pSubWInfo->a[0].iIdxCur==iCovCur ); + pCov = pSubLoop->u.btree.pIndex; + wctrlFlags |= WHERE_REOPEN_IDX; + }else{ + pCov = 0; + } - assert( op==SAVEPOINT_RELEASE||op==SAVEPOINT_ROLLBACK||op==SAVEPOINT_BEGIN ); - assert( iSavepoint>=0 ); - if( db->aVTrans ){ - int i; - for(i=0; rc==SQLITE_OK && inVTrans; i++){ - VTable *pVTab = db->aVTrans[i]; - const sqlite3_module *pMod = pVTab->pMod->pModule; - if( pMod->iVersion>=2 ){ - int (*xMethod)(sqlite3_vtab *, int); - switch( op ){ - case SAVEPOINT_BEGIN: - xMethod = pMod->xSavepoint; - pVTab->iSavepoint = iSavepoint+1; - break; - case SAVEPOINT_ROLLBACK: - xMethod = pMod->xRollbackTo; - break; - default: - xMethod = pMod->xRelease; - break; - } - if( xMethod && pVTab->iSavepoint>iSavepoint ){ - rc = xMethod(db->aVTrans[i]->pVtab, iSavepoint); + /* Finish the loop through table entries that match term pOrTerm. */ + sqlite3WhereEnd(pSubWInfo); } } } - } - return rc; -} + pLevel->u.pCovidx = pCov; + if( pCov ) pLevel->iIdxCur = iCovCur; + if( pAndExpr ){ + pAndExpr->pLeft = 0; + sqlite3ExprDelete(db, pAndExpr); + } + sqlite3VdbeChangeP1(v, iRetInit, sqlite3VdbeCurrentAddr(v)); + sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrBrk); + sqlite3VdbeResolveLabel(v, iLoopBody); -/* -** The first parameter (pDef) is a function implementation. The -** second parameter (pExpr) is the first argument to this function. -** If pExpr is a column in a virtual table, then let the virtual -** table implementation have an opportunity to overload the function. -** -** This routine is used to allow virtual table implementations to -** overload MATCH, LIKE, GLOB, and REGEXP operators. -** -** Return either the pDef argument (indicating no change) or a -** new FuncDef structure that is marked as ephemeral using the -** SQLITE_FUNC_EPHEM flag. -*/ -SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction( - sqlite3 *db, /* Database connection for reporting malloc problems */ - FuncDef *pDef, /* Function to possibly overload */ - int nArg, /* Number of arguments to the function */ - Expr *pExpr /* First argument to the function */ -){ - Table *pTab; - sqlite3_vtab *pVtab; - sqlite3_module *pMod; - void (*xFunc)(sqlite3_context*,int,sqlite3_value**) = 0; - void *pArg = 0; - FuncDef *pNew; - int rc = 0; - char *zLowerName; - unsigned char *z; + if( pWInfo->nLevel>1 ) sqlite3StackFree(db, pOrTab); + if( !untestedTerms ) disableTerm(pLevel, pTerm); + }else +#endif /* SQLITE_OMIT_OR_OPTIMIZATION */ + { + /* Case 6: There is no usable index. We must do a complete + ** scan of the entire table. + */ + static const u8 aStep[] = { OP_Next, OP_Prev }; + static const u8 aStart[] = { OP_Rewind, OP_Last }; + assert( bRev==0 || bRev==1 ); + if( pTabItem->isRecursive ){ + /* Tables marked isRecursive have only a single row that is stored in + ** a pseudo-cursor. No need to Rewind or Next such cursors. */ + pLevel->op = OP_Noop; + }else{ + pLevel->op = aStep[bRev]; + pLevel->p1 = iCur; + pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrBrk); + VdbeCoverageIf(v, bRev==0); + VdbeCoverageIf(v, bRev!=0); + pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; + } + } - /* Check to see the left operand is a column in a virtual table */ - if( NEVER(pExpr==0) ) return pDef; - if( pExpr->op!=TK_COLUMN ) return pDef; - pTab = pExpr->pTab; - if( NEVER(pTab==0) ) return pDef; - if( (pTab->tabFlags & TF_Virtual)==0 ) return pDef; - pVtab = sqlite3GetVTable(db, pTab)->pVtab; - assert( pVtab!=0 ); - assert( pVtab->pModule!=0 ); - pMod = (sqlite3_module *)pVtab->pModule; - if( pMod->xFindFunction==0 ) return pDef; - - /* Call the xFindFunction method on the virtual table implementation - ** to see if the implementation wants to overload this function + /* Insert code to test every subexpression that can be completely + ** computed using the current set of tables. */ - zLowerName = sqlite3DbStrDup(db, pDef->zName); - if( zLowerName ){ - for(z=(unsigned char*)zLowerName; *z; z++){ - *z = sqlite3UpperToLower[*z]; + for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){ + Expr *pE; + testcase( pTerm->wtFlags & TERM_VIRTUAL ); + testcase( pTerm->wtFlags & TERM_CODED ); + if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; + if( (pTerm->prereqAll & pLevel->notReady)!=0 ){ + testcase( pWInfo->untestedTerms==0 + && (pWInfo->wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ); + pWInfo->untestedTerms = 1; + continue; } - rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xFunc, &pArg); - sqlite3DbFree(db, zLowerName); + pE = pTerm->pExpr; + assert( pE!=0 ); + if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){ + continue; + } + sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL); + pTerm->wtFlags |= TERM_CODED; } - if( rc==0 ){ - return pDef; + + /* Insert code to test for implied constraints based on transitivity + ** of the "==" operator. + ** + ** Example: If the WHERE clause contains "t1.a=t2.b" and "t2.b=123" + ** and we are coding the t1 loop and the t2 loop has not yet coded, + ** then we cannot use the "t1.a=t2.b" constraint, but we can code + ** the implied "t1.a=123" constraint. + */ + for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){ + Expr *pE, *pEAlt; + WhereTerm *pAlt; + if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; + if( pTerm->eOperator!=(WO_EQUIV|WO_EQ) ) continue; + if( pTerm->leftCursor!=iCur ) continue; + if( pLevel->iLeftJoin ) continue; + pE = pTerm->pExpr; + assert( !ExprHasProperty(pE, EP_FromJoin) ); + assert( (pTerm->prereqRight & pLevel->notReady)!=0 ); + pAlt = findTerm(pWC, iCur, pTerm->u.leftColumn, notReady, WO_EQ|WO_IN, 0); + if( pAlt==0 ) continue; + if( pAlt->wtFlags & (TERM_CODED) ) continue; + testcase( pAlt->eOperator & WO_EQ ); + testcase( pAlt->eOperator & WO_IN ); + VdbeModuleComment((v, "begin transitive constraint")); + pEAlt = sqlite3StackAllocRaw(db, sizeof(*pEAlt)); + if( pEAlt ){ + *pEAlt = *pAlt->pExpr; + pEAlt->pLeft = pE->pLeft; + sqlite3ExprIfFalse(pParse, pEAlt, addrCont, SQLITE_JUMPIFNULL); + sqlite3StackFree(db, pEAlt); + } } - /* Create a new ephemeral function definition for the overloaded - ** function */ - pNew = sqlite3DbMallocZero(db, sizeof(*pNew) - + sqlite3Strlen30(pDef->zName) + 1); - if( pNew==0 ){ - return pDef; + /* For a LEFT OUTER JOIN, generate code that will record the fact that + ** at least one row of the right table has matched the left table. + */ + if( pLevel->iLeftJoin ){ + pLevel->addrFirst = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp2(v, OP_Integer, 1, pLevel->iLeftJoin); + VdbeComment((v, "record LEFT JOIN hit")); + sqlite3ExprCacheClear(pParse); + for(pTerm=pWC->a, j=0; jnTerm; j++, pTerm++){ + testcase( pTerm->wtFlags & TERM_VIRTUAL ); + testcase( pTerm->wtFlags & TERM_CODED ); + if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; + if( (pTerm->prereqAll & pLevel->notReady)!=0 ){ + assert( pWInfo->untestedTerms ); + continue; + } + assert( pTerm->pExpr ); + sqlite3ExprIfFalse(pParse, pTerm->pExpr, addrCont, SQLITE_JUMPIFNULL); + pTerm->wtFlags |= TERM_CODED; + } } - *pNew = *pDef; - pNew->zName = (char *)&pNew[1]; - memcpy(pNew->zName, pDef->zName, sqlite3Strlen30(pDef->zName)+1); - pNew->xFunc = xFunc; - pNew->pUserData = pArg; - pNew->flags |= SQLITE_FUNC_EPHEM; - return pNew; + + return pLevel->notReady; } +#ifdef WHERETRACE_ENABLED /* -** Make sure virtual table pTab is contained in the pParse->apVirtualLock[] -** array so that an OP_VBegin will get generated for it. Add pTab to the -** array if it is missing. If pTab is already in the array, this routine -** is a no-op. +** Print the content of a WhereTerm object */ -SQLITE_PRIVATE void sqlite3VtabMakeWritable(Parse *pParse, Table *pTab){ - Parse *pToplevel = sqlite3ParseToplevel(pParse); - int i, n; - Table **apVtabLock; - - assert( IsVirtual(pTab) ); - for(i=0; inVtabLock; i++){ - if( pTab==pToplevel->apVtabLock[i] ) return; - } - n = (pToplevel->nVtabLock+1)*sizeof(pToplevel->apVtabLock[0]); - apVtabLock = sqlite3_realloc(pToplevel->apVtabLock, n); - if( apVtabLock ){ - pToplevel->apVtabLock = apVtabLock; - pToplevel->apVtabLock[pToplevel->nVtabLock++] = pTab; +static void whereTermPrint(WhereTerm *pTerm, int iTerm){ + if( pTerm==0 ){ + sqlite3DebugPrintf("TERM-%-3d NULL\n", iTerm); }else{ - pToplevel->db->mallocFailed = 1; + char zType[4]; + memcpy(zType, "...", 4); + if( pTerm->wtFlags & TERM_VIRTUAL ) zType[0] = 'V'; + if( pTerm->eOperator & WO_EQUIV ) zType[1] = 'E'; + if( ExprHasProperty(pTerm->pExpr, EP_FromJoin) ) zType[2] = 'L'; + sqlite3DebugPrintf("TERM-%-3d %p %s cursor=%-3d prob=%-3d op=0x%03x\n", + iTerm, pTerm, zType, pTerm->leftCursor, pTerm->truthProb, + pTerm->eOperator); + sqlite3TreeViewExpr(0, pTerm->pExpr, 0); } } +#endif +#ifdef WHERETRACE_ENABLED /* -** Return the ON CONFLICT resolution mode in effect for the virtual -** table update operation currently in progress. -** -** The results of this routine are undefined unless it is called from -** within an xUpdate method. -*/ -SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *db){ - static const unsigned char aMap[] = { - SQLITE_ROLLBACK, SQLITE_ABORT, SQLITE_FAIL, SQLITE_IGNORE, SQLITE_REPLACE - }; - assert( OE_Rollback==1 && OE_Abort==2 && OE_Fail==3 ); - assert( OE_Ignore==4 && OE_Replace==5 ); - assert( db->vtabOnConflict>=1 && db->vtabOnConflict<=5 ); - return (int)aMap[db->vtabOnConflict-1]; -} - -/* -** Call from within the xCreate() or xConnect() methods to provide -** the SQLite core with additional information about the behavior -** of the virtual table being implemented. +** Print a WhereLoop object for debugging purposes */ -SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){ - va_list ap; - int rc = SQLITE_OK; - - sqlite3_mutex_enter(db->mutex); - - va_start(ap, op); - switch( op ){ - case SQLITE_VTAB_CONSTRAINT_SUPPORT: { - VtabCtx *p = db->pVtabCtx; - if( !p ){ - rc = SQLITE_MISUSE_BKPT; - }else{ - assert( p->pTab==0 || (p->pTab->tabFlags & TF_Virtual)!=0 ); - p->pVTable->bConstraint = (u8)va_arg(ap, int); +static void whereLoopPrint(WhereLoop *p, WhereClause *pWC){ + WhereInfo *pWInfo = pWC->pWInfo; + int nb = 1+(pWInfo->pTabList->nSrc+7)/8; + struct SrcList_item *pItem = pWInfo->pTabList->a + p->iTab; + Table *pTab = pItem->pTab; + sqlite3DebugPrintf("%c%2d.%0*llx.%0*llx", p->cId, + p->iTab, nb, p->maskSelf, nb, p->prereq); + sqlite3DebugPrintf(" %12s", + pItem->zAlias ? pItem->zAlias : pTab->zName); + if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){ + const char *zName; + if( p->u.btree.pIndex && (zName = p->u.btree.pIndex->zName)!=0 ){ + if( strncmp(zName, "sqlite_autoindex_", 17)==0 ){ + int i = sqlite3Strlen30(zName) - 1; + while( zName[i]!='_' ) i--; + zName += i; } - break; + sqlite3DebugPrintf(".%-16s %2d", zName, p->u.btree.nEq); + }else{ + sqlite3DebugPrintf("%20s",""); + } + }else{ + char *z; + if( p->u.vtab.idxStr ){ + z = sqlite3_mprintf("(%d,\"%s\",%x)", + p->u.vtab.idxNum, p->u.vtab.idxStr, p->u.vtab.omitMask); + }else{ + z = sqlite3_mprintf("(%d,%x)", p->u.vtab.idxNum, p->u.vtab.omitMask); + } + sqlite3DebugPrintf(" %-19s", z); + sqlite3_free(z); + } + if( p->wsFlags & WHERE_SKIPSCAN ){ + sqlite3DebugPrintf(" f %05x %d-%d", p->wsFlags, p->nLTerm,p->u.btree.nSkip); + }else{ + sqlite3DebugPrintf(" f %05x N %d", p->wsFlags, p->nLTerm); + } + sqlite3DebugPrintf(" cost %d,%d,%d\n", p->rSetup, p->rRun, p->nOut); + if( p->nLTerm && (sqlite3WhereTrace & 0x100)!=0 ){ + int i; + for(i=0; inLTerm; i++){ + whereTermPrint(p->aLTerm[i], i); } - default: - rc = SQLITE_MISUSE_BKPT; - break; } - va_end(ap); - - if( rc!=SQLITE_OK ) sqlite3Error(db, rc, 0); - sqlite3_mutex_leave(db->mutex); - return rc; } +#endif -#endif /* SQLITE_OMIT_VIRTUALTABLE */ - -/************** End of vtab.c ************************************************/ -/************** Begin file where.c *******************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This module contains C code that generates VDBE code used to process -** the WHERE clause of SQL statements. This module is responsible for -** generating the code that loops through a table looking for applicable -** rows. Indices are selected and used to speed the search when doing -** so is applicable. Because this module is responsible for selecting -** indices, you might also think of this module as the "query optimizer". +** Convert bulk memory into a valid WhereLoop that can be passed +** to whereLoopClear harmlessly. */ - +static void whereLoopInit(WhereLoop *p){ + p->aLTerm = p->aLTermSpace; + p->nLTerm = 0; + p->nLSlot = ArraySize(p->aLTermSpace); + p->wsFlags = 0; +} /* -** Trace output macros +** Clear the WhereLoop.u union. Leave WhereLoop.pLTerm intact. */ -#if defined(SQLITE_TEST) || defined(SQLITE_DEBUG) -SQLITE_PRIVATE int sqlite3WhereTrace = 0; -#endif -#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG) -# define WHERETRACE(X) if(sqlite3WhereTrace) sqlite3DebugPrintf X -#else -# define WHERETRACE(X) -#endif - -/* Forward reference -*/ -typedef struct WhereClause WhereClause; -typedef struct WhereMaskSet WhereMaskSet; -typedef struct WhereOrInfo WhereOrInfo; -typedef struct WhereAndInfo WhereAndInfo; -typedef struct WhereCost WhereCost; +static void whereLoopClearUnion(sqlite3 *db, WhereLoop *p){ + if( p->wsFlags & (WHERE_VIRTUALTABLE|WHERE_AUTO_INDEX) ){ + if( (p->wsFlags & WHERE_VIRTUALTABLE)!=0 && p->u.vtab.needFree ){ + sqlite3_free(p->u.vtab.idxStr); + p->u.vtab.needFree = 0; + p->u.vtab.idxStr = 0; + }else if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 && p->u.btree.pIndex!=0 ){ + sqlite3DbFree(db, p->u.btree.pIndex->zColAff); + sqlite3KeyInfoUnref(p->u.btree.pIndex->pKeyInfo); + sqlite3DbFree(db, p->u.btree.pIndex); + p->u.btree.pIndex = 0; + } + } +} /* -** The query generator uses an array of instances of this structure to -** help it analyze the subexpressions of the WHERE clause. Each WHERE -** clause subexpression is separated from the others by AND operators, -** usually, or sometimes subexpressions separated by OR. -** -** All WhereTerms are collected into a single WhereClause structure. -** The following identity holds: -** -** WhereTerm.pWC->a[WhereTerm.idx] == WhereTerm -** -** When a term is of the form: -** -** X -** -** where X is a column name and is one of certain operators, -** then WhereTerm.leftCursor and WhereTerm.u.leftColumn record the -** cursor number and column number for X. WhereTerm.eOperator records -** the using a bitmask encoding defined by WO_xxx below. The -** use of a bitmask encoding for the operator allows us to search -** quickly for terms that match any of several different operators. -** -** A WhereTerm might also be two or more subterms connected by OR: -** -** (t1.X ) OR (t1.Y ) OR .... -** -** In this second case, wtFlag as the TERM_ORINFO set and eOperator==WO_OR -** and the WhereTerm.u.pOrInfo field points to auxiliary information that -** is collected about the -** -** If a term in the WHERE clause does not match either of the two previous -** categories, then eOperator==0. The WhereTerm.pExpr field is still set -** to the original subexpression content and wtFlags is set up appropriately -** but no other fields in the WhereTerm object are meaningful. -** -** When eOperator!=0, prereqRight and prereqAll record sets of cursor numbers, -** but they do so indirectly. A single WhereMaskSet structure translates -** cursor number into bits and the translated bit is stored in the prereq -** fields. The translation is used in order to maximize the number of -** bits that will fit in a Bitmask. The VDBE cursor numbers might be -** spread out over the non-negative integers. For example, the cursor -** numbers might be 3, 8, 9, 10, 20, 23, 41, and 45. The WhereMaskSet -** translates these sparse cursor numbers into consecutive integers -** beginning with 0 in order to make the best possible use of the available -** bits in the Bitmask. So, in the example above, the cursor numbers -** would be mapped into integers 0 through 7. -** -** The number of terms in a join is limited by the number of bits -** in prereqRight and prereqAll. The default is 64 bits, hence SQLite -** is only able to process joins with 64 or fewer tables. +** Deallocate internal memory used by a WhereLoop object */ -typedef struct WhereTerm WhereTerm; -struct WhereTerm { - Expr *pExpr; /* Pointer to the subexpression that is this term */ - int iParent; /* Disable pWC->a[iParent] when this term disabled */ - int leftCursor; /* Cursor number of X in "X " */ - union { - int leftColumn; /* Column number of X in "X " */ - WhereOrInfo *pOrInfo; /* Extra information if eOperator==WO_OR */ - WhereAndInfo *pAndInfo; /* Extra information if eOperator==WO_AND */ - } u; - u16 eOperator; /* A WO_xx value describing */ - u8 wtFlags; /* TERM_xxx bit flags. See below */ - u8 nChild; /* Number of children that must disable us */ - WhereClause *pWC; /* The clause this term is part of */ - Bitmask prereqRight; /* Bitmask of tables used by pExpr->pRight */ - Bitmask prereqAll; /* Bitmask of tables referenced by pExpr */ -}; +static void whereLoopClear(sqlite3 *db, WhereLoop *p){ + if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm); + whereLoopClearUnion(db, p); + whereLoopInit(p); +} /* -** Allowed values of WhereTerm.wtFlags +** Increase the memory allocation for pLoop->aLTerm[] to be at least n. */ -#define TERM_DYNAMIC 0x01 /* Need to call sqlite3ExprDelete(db, pExpr) */ -#define TERM_VIRTUAL 0x02 /* Added by the optimizer. Do not code */ -#define TERM_CODED 0x04 /* This term is already coded */ -#define TERM_COPIED 0x08 /* Has a child */ -#define TERM_ORINFO 0x10 /* Need to free the WhereTerm.u.pOrInfo object */ -#define TERM_ANDINFO 0x20 /* Need to free the WhereTerm.u.pAndInfo obj */ -#define TERM_OR_OK 0x40 /* Used during OR-clause processing */ -#ifdef SQLITE_ENABLE_STAT2 -# define TERM_VNULL 0x80 /* Manufactured x>NULL or x<=NULL term */ -#else -# define TERM_VNULL 0x00 /* Disabled if not using stat2 */ -#endif +static int whereLoopResize(sqlite3 *db, WhereLoop *p, int n){ + WhereTerm **paNew; + if( p->nLSlot>=n ) return SQLITE_OK; + n = (n+7)&~7; + paNew = sqlite3DbMallocRaw(db, sizeof(p->aLTerm[0])*n); + if( paNew==0 ) return SQLITE_NOMEM; + memcpy(paNew, p->aLTerm, sizeof(p->aLTerm[0])*p->nLSlot); + if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm); + p->aLTerm = paNew; + p->nLSlot = n; + return SQLITE_OK; +} /* -** An instance of the following structure holds all information about a -** WHERE clause. Mostly this is a container for one or more WhereTerms. +** Transfer content from the second pLoop into the first. */ -struct WhereClause { - Parse *pParse; /* The parser context */ - WhereMaskSet *pMaskSet; /* Mapping of table cursor numbers to bitmasks */ - Bitmask vmask; /* Bitmask identifying virtual table cursors */ - u8 op; /* Split operator. TK_AND or TK_OR */ - int nTerm; /* Number of terms */ - int nSlot; /* Number of entries in a[] */ - WhereTerm *a; /* Each a[] describes a term of the WHERE cluase */ -#if defined(SQLITE_SMALL_STACK) - WhereTerm aStatic[1]; /* Initial static space for a[] */ -#else - WhereTerm aStatic[8]; /* Initial static space for a[] */ -#endif -}; +static int whereLoopXfer(sqlite3 *db, WhereLoop *pTo, WhereLoop *pFrom){ + whereLoopClearUnion(db, pTo); + if( whereLoopResize(db, pTo, pFrom->nLTerm) ){ + memset(&pTo->u, 0, sizeof(pTo->u)); + return SQLITE_NOMEM; + } + memcpy(pTo, pFrom, WHERE_LOOP_XFER_SZ); + memcpy(pTo->aLTerm, pFrom->aLTerm, pTo->nLTerm*sizeof(pTo->aLTerm[0])); + if( pFrom->wsFlags & WHERE_VIRTUALTABLE ){ + pFrom->u.vtab.needFree = 0; + }else if( (pFrom->wsFlags & WHERE_AUTO_INDEX)!=0 ){ + pFrom->u.btree.pIndex = 0; + } + return SQLITE_OK; +} /* -** A WhereTerm with eOperator==WO_OR has its u.pOrInfo pointer set to -** a dynamically allocated instance of the following structure. +** Delete a WhereLoop object */ -struct WhereOrInfo { - WhereClause wc; /* Decomposition into subterms */ - Bitmask indexable; /* Bitmask of all indexable tables in the clause */ -}; +static void whereLoopDelete(sqlite3 *db, WhereLoop *p){ + whereLoopClear(db, p); + sqlite3DbFree(db, p); +} /* -** A WhereTerm with eOperator==WO_AND has its u.pAndInfo pointer set to -** a dynamically allocated instance of the following structure. +** Free a WhereInfo structure */ -struct WhereAndInfo { - WhereClause wc; /* The subexpression broken out */ -}; +static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){ + if( ALWAYS(pWInfo) ){ + whereClauseClear(&pWInfo->sWC); + while( pWInfo->pLoops ){ + WhereLoop *p = pWInfo->pLoops; + pWInfo->pLoops = p->pNextLoop; + whereLoopDelete(db, p); + } + sqlite3DbFree(db, pWInfo); + } +} /* -** An instance of the following structure keeps track of a mapping -** between VDBE cursor numbers and bits of the bitmasks in WhereTerm. -** -** The VDBE cursor numbers are small integers contained in -** SrcList_item.iCursor and Expr.iTable fields. For any given WHERE -** clause, the cursor numbers might not begin with 0 and they might -** contain gaps in the numbering sequence. But we want to make maximum -** use of the bits in our bitmasks. This structure provides a mapping -** from the sparse cursor numbers into consecutive integers beginning -** with 0. +** Return TRUE if both of the following are true: ** -** If WhereMaskSet.ix[A]==B it means that The A-th bit of a Bitmask -** corresponds VDBE cursor number B. The A-th bit of a bitmask is 1<3, 5->1, 8->2, 29->0, -** 57->5, 73->4. Or one of 719 other combinations might be used. It -** does not really matter. What is important is that sparse cursor -** numbers all get mapped into bit numbers that begin with 0 and contain -** no gaps. -*/ -struct WhereMaskSet { - int n; /* Number of assigned cursor values */ - int ix[BMS]; /* Cursor assigned to each bit */ -}; - -/* -** A WhereCost object records a lookup strategy and the estimated -** cost of pursuing that strategy. -*/ -struct WhereCost { - WherePlan plan; /* The lookup strategy */ - double rCost; /* Overall cost of pursuing this search strategy */ - Bitmask used; /* Bitmask of cursors used by this plan */ -}; - -/* -** Bitmasks for the operators that indices are able to exploit. An -** OR-ed combination of these values can be used when searching for -** terms in the where clause. -*/ -#define WO_IN 0x001 -#define WO_EQ 0x002 -#define WO_LT (WO_EQ<<(TK_LT-TK_EQ)) -#define WO_LE (WO_EQ<<(TK_LE-TK_EQ)) -#define WO_GT (WO_EQ<<(TK_GT-TK_EQ)) -#define WO_GE (WO_EQ<<(TK_GE-TK_EQ)) -#define WO_MATCH 0x040 -#define WO_ISNULL 0x080 -#define WO_OR 0x100 /* Two or more OR-connected terms */ -#define WO_AND 0x200 /* Two or more AND-connected terms */ -#define WO_NOOP 0x800 /* This term does not restrict search space */ - -#define WO_ALL 0xfff /* Mask of all possible WO_* values */ -#define WO_SINGLE 0x0ff /* Mask of all non-compound WO_* values */ - -/* -** Value for wsFlags returned by bestIndex() and stored in -** WhereLevel.wsFlags. These flags determine which search -** strategies are appropriate. -** -** The least significant 12 bits is reserved as a mask for WO_ values above. -** The WhereLevel.wsFlags field is usually set to WO_IN|WO_EQ|WO_ISNULL. -** But if the table is the right table of a left join, WhereLevel.wsFlags -** is set to WO_IN|WO_EQ. The WhereLevel.wsFlags field can then be used as -** the "op" parameter to findTerm when we are resolving equality constraints. -** ISNULL constraints will then not be used on the right table of a left -** join. Tickets #2177 and #2189. -*/ -#define WHERE_ROWID_EQ 0x00001000 /* rowid=EXPR or rowid IN (...) */ -#define WHERE_ROWID_RANGE 0x00002000 /* rowidEXPR */ -#define WHERE_COLUMN_EQ 0x00010000 /* x=EXPR or x IN (...) or x IS NULL */ -#define WHERE_COLUMN_RANGE 0x00020000 /* xEXPR */ -#define WHERE_COLUMN_IN 0x00040000 /* x IN (...) */ -#define WHERE_COLUMN_NULL 0x00080000 /* x IS NULL */ -#define WHERE_INDEXED 0x000f0000 /* Anything that uses an index */ -#define WHERE_NOT_FULLSCAN 0x100f3000 /* Does not do a full table scan */ -#define WHERE_IN_ABLE 0x000f1000 /* Able to support an IN operator */ -#define WHERE_TOP_LIMIT 0x00100000 /* xEXPR or x>=EXPR constraint */ -#define WHERE_BOTH_LIMIT 0x00300000 /* Both x>EXPR and xpParse = pParse; - pWC->pMaskSet = pMaskSet; - pWC->nTerm = 0; - pWC->nSlot = ArraySize(pWC->aStatic); - pWC->a = pWC->aStatic; - pWC->vmask = 0; -} - -/* Forward reference */ -static void whereClauseClear(WhereClause*); - -/* -** Deallocate all memory associated with a WhereOrInfo object. -*/ -static void whereOrInfoDelete(sqlite3 *db, WhereOrInfo *p){ - whereClauseClear(&p->wc); - sqlite3DbFree(db, p); + int i, j; + if( pX->nLTerm >= pY->nLTerm ) return 0; /* X is not a subset of Y */ + if( pX->rRun >= pY->rRun ){ + if( pX->rRun > pY->rRun ) return 0; /* X costs more than Y */ + if( pX->nOut > pY->nOut ) return 0; /* X costs more than Y */ + } + for(i=pX->nLTerm-1; i>=0; i--){ + for(j=pY->nLTerm-1; j>=0; j--){ + if( pY->aLTerm[j]==pX->aLTerm[i] ) break; + } + if( j<0 ) return 0; /* X not a subset of Y since term X[i] not used by Y */ + } + return 1; /* All conditions meet */ } /* -** Deallocate all memory associated with a WhereAndInfo object. +** Try to adjust the cost of WhereLoop pTemplate upwards or downwards so +** that: +** +** (1) pTemplate costs less than any other WhereLoops that are a proper +** subset of pTemplate +** +** (2) pTemplate costs more than any other WhereLoops for which pTemplate +** is a proper subset. +** +** To say "WhereLoop X is a proper subset of Y" means that X uses fewer +** WHERE clause terms than Y and that every WHERE clause term used by X is +** also used by Y. +** +** This adjustment is omitted for SKIPSCAN loops. In a SKIPSCAN loop, the +** WhereLoop.nLTerm field is not an accurate measure of the number of WHERE +** clause terms covered, since some of the first nLTerm entries in aLTerm[] +** will be NULL (because they are skipped). That makes it more difficult +** to compare the loops. We could add extra code to do the comparison, and +** perhaps we will someday. But SKIPSCAN is sufficiently uncommon, and this +** adjustment is sufficient minor, that it is very difficult to construct +** a test case where the extra code would improve the query plan. Better +** to avoid the added complexity and just omit cost adjustments to SKIPSCAN +** loops. */ -static void whereAndInfoDelete(sqlite3 *db, WhereAndInfo *p){ - whereClauseClear(&p->wc); - sqlite3DbFree(db, p); +static void whereLoopAdjustCost(const WhereLoop *p, WhereLoop *pTemplate){ + if( (pTemplate->wsFlags & WHERE_INDEXED)==0 ) return; + if( (pTemplate->wsFlags & WHERE_SKIPSCAN)!=0 ) return; + for(; p; p=p->pNextLoop){ + if( p->iTab!=pTemplate->iTab ) continue; + if( (p->wsFlags & WHERE_INDEXED)==0 ) continue; + if( (p->wsFlags & WHERE_SKIPSCAN)!=0 ) continue; + if( whereLoopCheaperProperSubset(p, pTemplate) ){ + /* Adjust pTemplate cost downward so that it is cheaper than its + ** subset p */ + pTemplate->rRun = p->rRun; + pTemplate->nOut = p->nOut - 1; + }else if( whereLoopCheaperProperSubset(pTemplate, p) ){ + /* Adjust pTemplate cost upward so that it is costlier than p since + ** pTemplate is a proper subset of p */ + pTemplate->rRun = p->rRun; + pTemplate->nOut = p->nOut + 1; + } + } } /* -** Deallocate a WhereClause structure. The WhereClause structure -** itself is not freed. This routine is the inverse of whereClauseInit(). +** Search the list of WhereLoops in *ppPrev looking for one that can be +** supplanted by pTemplate. +** +** Return NULL if the WhereLoop list contains an entry that can supplant +** pTemplate, in other words if pTemplate does not belong on the list. +** +** If pX is a WhereLoop that pTemplate can supplant, then return the +** link that points to pX. +** +** If pTemplate cannot supplant any existing element of the list but needs +** to be added to the list, then return a pointer to the tail of the list. */ -static void whereClauseClear(WhereClause *pWC){ - int i; - WhereTerm *a; - sqlite3 *db = pWC->pParse->db; - for(i=pWC->nTerm-1, a=pWC->a; i>=0; i--, a++){ - if( a->wtFlags & TERM_DYNAMIC ){ - sqlite3ExprDelete(db, a->pExpr); +static WhereLoop **whereLoopFindLesser( + WhereLoop **ppPrev, + const WhereLoop *pTemplate +){ + WhereLoop *p; + for(p=(*ppPrev); p; ppPrev=&p->pNextLoop, p=*ppPrev){ + if( p->iTab!=pTemplate->iTab || p->iSortIdx!=pTemplate->iSortIdx ){ + /* If either the iTab or iSortIdx values for two WhereLoop are different + ** then those WhereLoops need to be considered separately. Neither is + ** a candidate to replace the other. */ + continue; } - if( a->wtFlags & TERM_ORINFO ){ - whereOrInfoDelete(db, a->u.pOrInfo); - }else if( a->wtFlags & TERM_ANDINFO ){ - whereAndInfoDelete(db, a->u.pAndInfo); + /* In the current implementation, the rSetup value is either zero + ** or the cost of building an automatic index (NlogN) and the NlogN + ** is the same for compatible WhereLoops. */ + assert( p->rSetup==0 || pTemplate->rSetup==0 + || p->rSetup==pTemplate->rSetup ); + + /* whereLoopAddBtree() always generates and inserts the automatic index + ** case first. Hence compatible candidate WhereLoops never have a larger + ** rSetup. Call this SETUP-INVARIANT */ + assert( p->rSetup>=pTemplate->rSetup ); + + /* Any loop using an appliation-defined index (or PRIMARY KEY or + ** UNIQUE constraint) with one or more == constraints is better + ** than an automatic index. */ + if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 + && (pTemplate->wsFlags & WHERE_INDEXED)!=0 + && (pTemplate->wsFlags & WHERE_COLUMN_EQ)!=0 + && (p->prereq & pTemplate->prereq)==pTemplate->prereq + ){ + break; + } + + /* If existing WhereLoop p is better than pTemplate, pTemplate can be + ** discarded. WhereLoop p is better if: + ** (1) p has no more dependencies than pTemplate, and + ** (2) p has an equal or lower cost than pTemplate + */ + if( (p->prereq & pTemplate->prereq)==p->prereq /* (1) */ + && p->rSetup<=pTemplate->rSetup /* (2a) */ + && p->rRun<=pTemplate->rRun /* (2b) */ + && p->nOut<=pTemplate->nOut /* (2c) */ + ){ + return 0; /* Discard pTemplate */ + } + + /* If pTemplate is always better than p, then cause p to be overwritten + ** with pTemplate. pTemplate is better than p if: + ** (1) pTemplate has no more dependences than p, and + ** (2) pTemplate has an equal or lower cost than p. + */ + if( (p->prereq & pTemplate->prereq)==pTemplate->prereq /* (1) */ + && p->rRun>=pTemplate->rRun /* (2a) */ + && p->nOut>=pTemplate->nOut /* (2b) */ + ){ + assert( p->rSetup>=pTemplate->rSetup ); /* SETUP-INVARIANT above */ + break; /* Cause p to be overwritten by pTemplate */ } } - if( pWC->a!=pWC->aStatic ){ - sqlite3DbFree(db, pWC->a); - } + return ppPrev; } /* -** Add a single new WhereTerm entry to the WhereClause object pWC. -** The new WhereTerm object is constructed from Expr p and with wtFlags. -** The index in pWC->a[] of the new WhereTerm is returned on success. -** 0 is returned if the new WhereTerm could not be added due to a memory -** allocation error. The memory allocation failure will be recorded in -** the db->mallocFailed flag so that higher-level functions can detect it. +** Insert or replace a WhereLoop entry using the template supplied. ** -** This routine will increase the size of the pWC->a[] array as necessary. +** An existing WhereLoop entry might be overwritten if the new template +** is better and has fewer dependencies. Or the template will be ignored +** and no insert will occur if an existing WhereLoop is faster and has +** fewer dependencies than the template. Otherwise a new WhereLoop is +** added based on the template. ** -** If the wtFlags argument includes TERM_DYNAMIC, then responsibility -** for freeing the expression p is assumed by the WhereClause object pWC. -** This is true even if this routine fails to allocate a new WhereTerm. +** If pBuilder->pOrSet is not NULL then we care about only the +** prerequisites and rRun and nOut costs of the N best loops. That +** information is gathered in the pBuilder->pOrSet object. This special +** processing mode is used only for OR clause processing. ** -** WARNING: This routine might reallocate the space used to store -** WhereTerms. All pointers to WhereTerms should be invalidated after -** calling this routine. Such pointers may be reinitialized by referencing -** the pWC->a[] array. +** When accumulating multiple loops (when pBuilder->pOrSet is NULL) we +** still might overwrite similar loops with the new template if the +** new template is better. Loops may be overwritten if the following +** conditions are met: +** +** (1) They have the same iTab. +** (2) They have the same iSortIdx. +** (3) The template has same or fewer dependencies than the current loop +** (4) The template has the same or lower cost than the current loop */ -static int whereClauseInsert(WhereClause *pWC, Expr *p, u8 wtFlags){ - WhereTerm *pTerm; - int idx; - testcase( wtFlags & TERM_VIRTUAL ); /* EV: R-00211-15100 */ - if( pWC->nTerm>=pWC->nSlot ){ - WhereTerm *pOld = pWC->a; - sqlite3 *db = pWC->pParse->db; - pWC->a = sqlite3DbMallocRaw(db, sizeof(pWC->a[0])*pWC->nSlot*2 ); - if( pWC->a==0 ){ - if( wtFlags & TERM_DYNAMIC ){ - sqlite3ExprDelete(db, p); +static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){ + WhereLoop **ppPrev, *p; + WhereInfo *pWInfo = pBuilder->pWInfo; + sqlite3 *db = pWInfo->pParse->db; + + /* If pBuilder->pOrSet is defined, then only keep track of the costs + ** and prereqs. + */ + if( pBuilder->pOrSet!=0 ){ +#if WHERETRACE_ENABLED + u16 n = pBuilder->pOrSet->n; + int x = +#endif + whereOrInsert(pBuilder->pOrSet, pTemplate->prereq, pTemplate->rRun, + pTemplate->nOut); +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + sqlite3DebugPrintf(x?" or-%d: ":" or-X: ", n); + whereLoopPrint(pTemplate, pBuilder->pWC); + } +#endif + return SQLITE_OK; + } + + /* Look for an existing WhereLoop to replace with pTemplate + */ + whereLoopAdjustCost(pWInfo->pLoops, pTemplate); + ppPrev = whereLoopFindLesser(&pWInfo->pLoops, pTemplate); + + if( ppPrev==0 ){ + /* There already exists a WhereLoop on the list that is better + ** than pTemplate, so just ignore pTemplate */ +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + sqlite3DebugPrintf(" skip: "); + whereLoopPrint(pTemplate, pBuilder->pWC); + } +#endif + return SQLITE_OK; + }else{ + p = *ppPrev; + } + + /* If we reach this point it means that either p[] should be overwritten + ** with pTemplate[] if p[] exists, or if p==NULL then allocate a new + ** WhereLoop and insert it. + */ +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + if( p!=0 ){ + sqlite3DebugPrintf("replace: "); + whereLoopPrint(p, pBuilder->pWC); + } + sqlite3DebugPrintf(" add: "); + whereLoopPrint(pTemplate, pBuilder->pWC); + } +#endif + if( p==0 ){ + /* Allocate a new WhereLoop to add to the end of the list */ + *ppPrev = p = sqlite3DbMallocRaw(db, sizeof(WhereLoop)); + if( p==0 ) return SQLITE_NOMEM; + whereLoopInit(p); + p->pNextLoop = 0; + }else{ + /* We will be overwriting WhereLoop p[]. But before we do, first + ** go through the rest of the list and delete any other entries besides + ** p[] that are also supplated by pTemplate */ + WhereLoop **ppTail = &p->pNextLoop; + WhereLoop *pToDel; + while( *ppTail ){ + ppTail = whereLoopFindLesser(ppTail, pTemplate); + if( ppTail==0 ) break; + pToDel = *ppTail; + if( pToDel==0 ) break; + *ppTail = pToDel->pNextLoop; +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + sqlite3DebugPrintf(" delete: "); + whereLoopPrint(pToDel, pBuilder->pWC); } - pWC->a = pOld; - return 0; +#endif + whereLoopDelete(db, pToDel); } - memcpy(pWC->a, pOld, sizeof(pWC->a[0])*pWC->nTerm); - if( pOld!=pWC->aStatic ){ - sqlite3DbFree(db, pOld); + } + whereLoopXfer(db, p, pTemplate); + if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){ + Index *pIndex = p->u.btree.pIndex; + if( pIndex && pIndex->tnum==0 ){ + p->u.btree.pIndex = 0; } - pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]); } - pTerm = &pWC->a[idx = pWC->nTerm++]; - pTerm->pExpr = p; - pTerm->wtFlags = wtFlags; - pTerm->pWC = pWC; - pTerm->iParent = -1; - return idx; + return SQLITE_OK; } /* -** This routine identifies subexpressions in the WHERE clause where -** each subexpression is separated by the AND operator or some other -** operator specified in the op parameter. The WhereClause structure -** is filled with pointers to subexpressions. For example: -** -** WHERE a=='hello' AND coalesce(b,11)<10 AND (c+12!=d OR c==22) -** \________/ \_______________/ \________________/ -** slot[0] slot[1] slot[2] -** -** The original WHERE clause in pExpr is unaltered. All this routine -** does is make slot[] entries point to substructure within pExpr. +** Adjust the WhereLoop.nOut value downward to account for terms of the +** WHERE clause that reference the loop but which are not used by an +** index. ** -** In the previous sentence and in the diagram, "slot[]" refers to -** the WhereClause.a[] array. The slot[] array grows as needed to contain -** all terms of the WHERE clause. +** In the current implementation, the first extra WHERE clause term reduces +** the number of output rows by a factor of 10 and each additional term +** reduces the number of output rows by sqrt(2). */ -static void whereSplit(WhereClause *pWC, Expr *pExpr, int op){ - pWC->op = (u8)op; - if( pExpr==0 ) return; - if( pExpr->op!=op ){ - whereClauseInsert(pWC, pExpr, 0); - }else{ - whereSplit(pWC, pExpr->pLeft, op); - whereSplit(pWC, pExpr->pRight, op); +static void whereLoopOutputAdjust( + WhereClause *pWC, /* The WHERE clause */ + WhereLoop *pLoop, /* The loop to adjust downward */ + LogEst nRow /* Number of rows in the entire table */ +){ + WhereTerm *pTerm, *pX; + Bitmask notAllowed = ~(pLoop->prereq|pLoop->maskSelf); + int i, j; + int nEq = 0; /* Number of = constraints not within likely()/unlikely() */ + + for(i=pWC->nTerm, pTerm=pWC->a; i>0; i--, pTerm++){ + if( (pTerm->wtFlags & TERM_VIRTUAL)!=0 ) break; + if( (pTerm->prereqAll & pLoop->maskSelf)==0 ) continue; + if( (pTerm->prereqAll & notAllowed)!=0 ) continue; + for(j=pLoop->nLTerm-1; j>=0; j--){ + pX = pLoop->aLTerm[j]; + if( pX==0 ) continue; + if( pX==pTerm ) break; + if( pX->iParent>=0 && (&pWC->a[pX->iParent])==pTerm ) break; + } + if( j<0 ){ + if( pTerm->truthProb<=0 ){ + pLoop->nOut += pTerm->truthProb; + }else{ + pLoop->nOut--; + if( pTerm->eOperator&WO_EQ ) nEq++; + } + } + } + /* TUNING: If there is at least one equality constraint in the WHERE + ** clause that does not have a likelihood() explicitly assigned to it + ** then do not let the estimated number of output rows exceed half + ** the number of rows in the table. */ + if( nEq && pLoop->nOut>nRow-10 ){ + pLoop->nOut = nRow - 10; } } /* -** Initialize an expression mask set (a WhereMaskSet object) +** Adjust the cost C by the costMult facter T. This only occurs if +** compiled with -DSQLITE_ENABLE_COSTMULT */ -#define initMaskSet(P) memset(P, 0, sizeof(*P)) +#ifdef SQLITE_ENABLE_COSTMULT +# define ApplyCostMultiplier(C,T) C += T +#else +# define ApplyCostMultiplier(C,T) +#endif + +/* +** We have so far matched pBuilder->pNew->u.btree.nEq terms of the +** index pIndex. Try to match one more. +** +** When this function is called, pBuilder->pNew->nOut contains the +** number of rows expected to be visited by filtering using the nEq +** terms only. If it is modified, this value is restored before this +** function returns. +** +** If pProbe->tnum==0, that means pIndex is a fake index used for the +** INTEGER PRIMARY KEY. +*/ +static int whereLoopAddBtreeIndex( + WhereLoopBuilder *pBuilder, /* The WhereLoop factory */ + struct SrcList_item *pSrc, /* FROM clause term being analyzed */ + Index *pProbe, /* An index on pSrc */ + LogEst nInMul /* log(Number of iterations due to IN) */ +){ + WhereInfo *pWInfo = pBuilder->pWInfo; /* WHERE analyse context */ + Parse *pParse = pWInfo->pParse; /* Parsing context */ + sqlite3 *db = pParse->db; /* Database connection malloc context */ + WhereLoop *pNew; /* Template WhereLoop under construction */ + WhereTerm *pTerm; /* A WhereTerm under consideration */ + int opMask; /* Valid operators for constraints */ + WhereScan scan; /* Iterator for WHERE terms */ + Bitmask saved_prereq; /* Original value of pNew->prereq */ + u16 saved_nLTerm; /* Original value of pNew->nLTerm */ + u16 saved_nEq; /* Original value of pNew->u.btree.nEq */ + u16 saved_nSkip; /* Original value of pNew->u.btree.nSkip */ + u32 saved_wsFlags; /* Original value of pNew->wsFlags */ + LogEst saved_nOut; /* Original value of pNew->nOut */ + int iCol; /* Index of the column in the table */ + int rc = SQLITE_OK; /* Return code */ + LogEst rSize; /* Number of rows in the table */ + LogEst rLogSize; /* Logarithm of table size */ + WhereTerm *pTop = 0, *pBtm = 0; /* Top and bottom range constraints */ + + pNew = pBuilder->pNew; + if( db->mallocFailed ) return SQLITE_NOMEM; + + assert( (pNew->wsFlags & WHERE_VIRTUALTABLE)==0 ); + assert( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 ); + if( pNew->wsFlags & WHERE_BTM_LIMIT ){ + opMask = WO_LT|WO_LE; + }else if( pProbe->tnum<=0 || (pSrc->jointype & JT_LEFT)!=0 ){ + opMask = WO_EQ|WO_IN|WO_GT|WO_GE|WO_LT|WO_LE; + }else{ + opMask = WO_EQ|WO_IN|WO_ISNULL|WO_GT|WO_GE|WO_LT|WO_LE; + } + if( pProbe->bUnordered ) opMask &= ~(WO_GT|WO_GE|WO_LT|WO_LE); + + assert( pNew->u.btree.nEqnColumn ); + iCol = pProbe->aiColumn[pNew->u.btree.nEq]; + + pTerm = whereScanInit(&scan, pBuilder->pWC, pSrc->iCursor, iCol, + opMask, pProbe); + saved_nEq = pNew->u.btree.nEq; + saved_nSkip = pNew->u.btree.nSkip; + saved_nLTerm = pNew->nLTerm; + saved_wsFlags = pNew->wsFlags; + saved_prereq = pNew->prereq; + saved_nOut = pNew->nOut; + pNew->rSetup = 0; + rSize = pProbe->aiRowLogEst[0]; + rLogSize = estLog(rSize); + + /* Consider using a skip-scan if there are no WHERE clause constraints + ** available for the left-most terms of the index, and if the average + ** number of repeats in the left-most terms is at least 18. + ** + ** The magic number 18 is selected on the basis that scanning 17 rows + ** is almost always quicker than an index seek (even though if the index + ** contains fewer than 2^17 rows we assume otherwise in other parts of + ** the code). And, even if it is not, it should not be too much slower. + ** On the other hand, the extra seeks could end up being significantly + ** more expensive. */ + assert( 42==sqlite3LogEst(18) ); + if( saved_nEq==saved_nSkip + && saved_nEq+1nKeyCol + && pProbe->aiRowLogEst[saved_nEq+1]>=42 /* TUNING: Minimum for skip-scan */ + && (rc = whereLoopResize(db, pNew, pNew->nLTerm+1))==SQLITE_OK + ){ + LogEst nIter; + pNew->u.btree.nEq++; + pNew->u.btree.nSkip++; + pNew->aLTerm[pNew->nLTerm++] = 0; + pNew->wsFlags |= WHERE_SKIPSCAN; + nIter = pProbe->aiRowLogEst[saved_nEq] - pProbe->aiRowLogEst[saved_nEq+1]; + if( pTerm ){ + /* TUNING: When estimating skip-scan for a term that is also indexable, + ** multiply the cost of the skip-scan by 2.0, to make it a little less + ** desirable than the regular index lookup. */ + nIter += 10; assert( 10==sqlite3LogEst(2) ); + } + pNew->nOut -= nIter; + /* TUNING: Because uncertainties in the estimates for skip-scan queries, + ** add a 1.375 fudge factor to make skip-scan slightly less likely. */ + nIter += 5; + whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nIter + nInMul); + pNew->nOut = saved_nOut; + pNew->u.btree.nEq = saved_nEq; + pNew->u.btree.nSkip = saved_nSkip; + } + for(; rc==SQLITE_OK && pTerm!=0; pTerm = whereScanNext(&scan)){ + u16 eOp = pTerm->eOperator; /* Shorthand for pTerm->eOperator */ + LogEst rCostIdx; + LogEst nOutUnadjusted; /* nOut before IN() and WHERE adjustments */ + int nIn = 0; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + int nRecValid = pBuilder->nRecValid; +#endif + if( (eOp==WO_ISNULL || (pTerm->wtFlags&TERM_VNULL)!=0) + && (iCol<0 || pSrc->pTab->aCol[iCol].notNull) + ){ + continue; /* ignore IS [NOT] NULL constraints on NOT NULL columns */ + } + if( pTerm->prereqRight & pNew->maskSelf ) continue; + + pNew->wsFlags = saved_wsFlags; + pNew->u.btree.nEq = saved_nEq; + pNew->nLTerm = saved_nLTerm; + if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */ + pNew->aLTerm[pNew->nLTerm++] = pTerm; + pNew->prereq = (saved_prereq | pTerm->prereqRight) & ~pNew->maskSelf; + + assert( nInMul==0 + || (pNew->wsFlags & WHERE_COLUMN_NULL)!=0 + || (pNew->wsFlags & WHERE_COLUMN_IN)!=0 + || (pNew->wsFlags & WHERE_SKIPSCAN)!=0 + ); + + if( eOp & WO_IN ){ + Expr *pExpr = pTerm->pExpr; + pNew->wsFlags |= WHERE_COLUMN_IN; + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + /* "x IN (SELECT ...)": TUNING: the SELECT returns 25 rows */ + nIn = 46; assert( 46==sqlite3LogEst(25) ); + }else if( ALWAYS(pExpr->x.pList && pExpr->x.pList->nExpr) ){ + /* "x IN (value, value, ...)" */ + nIn = sqlite3LogEst(pExpr->x.pList->nExpr); + } + assert( nIn>0 ); /* RHS always has 2 or more terms... The parser + ** changes "x IN (?)" into "x=?". */ + + }else if( eOp & (WO_EQ) ){ + pNew->wsFlags |= WHERE_COLUMN_EQ; + if( iCol<0 || (nInMul==0 && pNew->u.btree.nEq==pProbe->nKeyCol-1) ){ + if( iCol>=0 && !IsUniqueIndex(pProbe) ){ + pNew->wsFlags |= WHERE_UNQ_WANTED; + }else{ + pNew->wsFlags |= WHERE_ONEROW; + } + } + }else if( eOp & WO_ISNULL ){ + pNew->wsFlags |= WHERE_COLUMN_NULL; + }else if( eOp & (WO_GT|WO_GE) ){ + testcase( eOp & WO_GT ); + testcase( eOp & WO_GE ); + pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_BTM_LIMIT; + pBtm = pTerm; + pTop = 0; + }else{ + assert( eOp & (WO_LT|WO_LE) ); + testcase( eOp & WO_LT ); + testcase( eOp & WO_LE ); + pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_TOP_LIMIT; + pTop = pTerm; + pBtm = (pNew->wsFlags & WHERE_BTM_LIMIT)!=0 ? + pNew->aLTerm[pNew->nLTerm-2] : 0; + } + + /* At this point pNew->nOut is set to the number of rows expected to + ** be visited by the index scan before considering term pTerm, or the + ** values of nIn and nInMul. In other words, assuming that all + ** "x IN(...)" terms are replaced with "x = ?". This block updates + ** the value of pNew->nOut to account for pTerm (but not nIn/nInMul). */ + assert( pNew->nOut==saved_nOut ); + if( pNew->wsFlags & WHERE_COLUMN_RANGE ){ + /* Adjust nOut using stat3/stat4 data. Or, if there is no stat3/stat4 + ** data, using some other estimate. */ + whereRangeScanEst(pParse, pBuilder, pBtm, pTop, pNew); + }else{ + int nEq = ++pNew->u.btree.nEq; + assert( eOp & (WO_ISNULL|WO_EQ|WO_IN) ); + + assert( pNew->nOut==saved_nOut ); + if( pTerm->truthProb<=0 && iCol>=0 ){ + assert( (eOp & WO_IN) || nIn==0 ); + testcase( eOp & WO_IN ); + pNew->nOut += pTerm->truthProb; + pNew->nOut -= nIn; + }else{ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + tRowcnt nOut = 0; + if( nInMul==0 + && pProbe->nSample + && pNew->u.btree.nEq<=pProbe->nSampleCol + && OptimizationEnabled(db, SQLITE_Stat3) + && ((eOp & WO_IN)==0 || !ExprHasProperty(pTerm->pExpr, EP_xIsSelect)) + ){ + Expr *pExpr = pTerm->pExpr; + if( (eOp & (WO_EQ|WO_ISNULL))!=0 ){ + testcase( eOp & WO_EQ ); + testcase( eOp & WO_ISNULL ); + rc = whereEqualScanEst(pParse, pBuilder, pExpr->pRight, &nOut); + }else{ + rc = whereInScanEst(pParse, pBuilder, pExpr->x.pList, &nOut); + } + if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; + if( rc!=SQLITE_OK ) break; /* Jump out of the pTerm loop */ + if( nOut ){ + pNew->nOut = sqlite3LogEst(nOut); + if( pNew->nOut>saved_nOut ) pNew->nOut = saved_nOut; + pNew->nOut -= nIn; + } + } + if( nOut==0 ) +#endif + { + pNew->nOut += (pProbe->aiRowLogEst[nEq] - pProbe->aiRowLogEst[nEq-1]); + if( eOp & WO_ISNULL ){ + /* TUNING: If there is no likelihood() value, assume that a + ** "col IS NULL" expression matches twice as many rows + ** as (col=?). */ + pNew->nOut += 10; + } + } + } + } + + /* Set rCostIdx to the cost of visiting selected rows in index. Add + ** it to pNew->rRun, which is currently set to the cost of the index + ** seek only. Then, if this is a non-covering index, add the cost of + ** visiting the rows in the main table. */ + rCostIdx = pNew->nOut + 1 + (15*pProbe->szIdxRow)/pSrc->pTab->szTabRow; + pNew->rRun = sqlite3LogEstAdd(rLogSize, rCostIdx); + if( (pNew->wsFlags & (WHERE_IDX_ONLY|WHERE_IPK))==0 ){ + pNew->rRun = sqlite3LogEstAdd(pNew->rRun, pNew->nOut + 16); + } + ApplyCostMultiplier(pNew->rRun, pProbe->pTable->costMult); + + nOutUnadjusted = pNew->nOut; + pNew->rRun += nInMul + nIn; + pNew->nOut += nInMul + nIn; + whereLoopOutputAdjust(pBuilder->pWC, pNew, rSize); + rc = whereLoopInsert(pBuilder, pNew); + + if( pNew->wsFlags & WHERE_COLUMN_RANGE ){ + pNew->nOut = saved_nOut; + }else{ + pNew->nOut = nOutUnadjusted; + } + + if( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 + && pNew->u.btree.nEqnColumn + ){ + whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nInMul+nIn); + } + pNew->nOut = saved_nOut; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + pBuilder->nRecValid = nRecValid; +#endif + } + pNew->prereq = saved_prereq; + pNew->u.btree.nEq = saved_nEq; + pNew->u.btree.nSkip = saved_nSkip; + pNew->wsFlags = saved_wsFlags; + pNew->nOut = saved_nOut; + pNew->nLTerm = saved_nLTerm; + return rc; +} /* -** Return the bitmask for the given cursor number. Return 0 if -** iCursor is not in the set. +** Return True if it is possible that pIndex might be useful in +** implementing the ORDER BY clause in pBuilder. +** +** Return False if pBuilder does not contain an ORDER BY clause or +** if there is no way for pIndex to be useful in implementing that +** ORDER BY clause. */ -static Bitmask getMask(WhereMaskSet *pMaskSet, int iCursor){ - int i; - assert( pMaskSet->n<=(int)sizeof(Bitmask)*8 ); - for(i=0; in; i++){ - if( pMaskSet->ix[i]==iCursor ){ - return ((Bitmask)1)<bUnordered ) return 0; + if( (pOB = pBuilder->pWInfo->pOrderBy)==0 ) return 0; + for(ii=0; iinExpr; ii++){ + Expr *pExpr = sqlite3ExprSkipCollate(pOB->a[ii].pExpr); + if( pExpr->op!=TK_COLUMN ) return 0; + if( pExpr->iTable==iCursor ){ + if( pExpr->iColumn<0 ) return 1; + for(jj=0; jjnKeyCol; jj++){ + if( pExpr->iColumn==pIndex->aiColumn[jj] ) return 1; + } } } return 0; } /* -** Create a new mask for cursor iCursor. -** -** There is one cursor per table in the FROM clause. The number of -** tables in the FROM clause is limited by a test early in the -** sqlite3WhereBegin() routine. So we know that the pMaskSet->ix[] -** array will never overflow. +** Return a bitmask where 1s indicate that the corresponding column of +** the table is used by an index. Only the first 63 columns are considered. */ -static void createMask(WhereMaskSet *pMaskSet, int iCursor){ - assert( pMaskSet->n < ArraySize(pMaskSet->ix) ); - pMaskSet->ix[pMaskSet->n++] = iCursor; +static Bitmask columnsInIndex(Index *pIdx){ + Bitmask m = 0; + int j; + for(j=pIdx->nColumn-1; j>=0; j--){ + int x = pIdx->aiColumn[j]; + if( x>=0 ){ + testcase( x==BMS-1 ); + testcase( x==BMS-2 ); + if( xa; inTerm; i++, pTerm++){ + if( sqlite3ExprImpliesExpr(pTerm->pExpr, pWhere, iTab) ) return 1; + } + return 0; } /* -** This routine walks (recursively) an expression tree and generates -** a bitmask indicating which tables are used in that expression -** tree. +** Add all WhereLoop objects for a single table of the join where the table +** is idenfied by pBuilder->pNew->iTab. That table is guaranteed to be +** a b-tree table, not a virtual table. +** +** The costs (WhereLoop.rRun) of the b-tree loops added by this function +** are calculated as follows: +** +** For a full scan, assuming the table (or index) contains nRow rows: +** +** cost = nRow * 3.0 // full-table scan +** cost = nRow * K // scan of covering index +** cost = nRow * (K+3.0) // scan of non-covering index +** +** where K is a value between 1.1 and 3.0 set based on the relative +** estimated average size of the index and table records. +** +** For an index scan, where nVisit is the number of index rows visited +** by the scan, and nSeek is the number of seek operations required on +** the index b-tree: +** +** cost = nSeek * (log(nRow) + K * nVisit) // covering index +** cost = nSeek * (log(nRow) + (K+3.0) * nVisit) // non-covering index +** +** Normally, nSeek is 1. nSeek values greater than 1 come about if the +** WHERE clause includes "x IN (....)" terms used in place of "x=?". Or when +** implicit "x IN (SELECT x FROM tbl)" terms are added for skip-scans. ** -** In order for this routine to work, the calling function must have -** previously invoked sqlite3ResolveExprNames() on the expression. See -** the header comment on that routine for additional information. -** The sqlite3ResolveExprNames() routines looks for column names and -** sets their opcodes to TK_COLUMN and their Expr.iTable fields to -** the VDBE cursor number of the table. This routine just has to -** translate the cursor numbers into bitmask values and OR all -** the bitmasks together. +** The estimated values (nRow, nVisit, nSeek) often contain a large amount +** of uncertainty. For this reason, scoring is designed to pick plans that +** "do the least harm" if the estimates are inaccurate. For example, a +** log(nRow) factor is omitted from a non-covering index scan in order to +** bias the scoring in favor of using an index, since the worst-case +** performance of using an index is far better than the worst-case performance +** of a full table scan. */ -static Bitmask exprListTableUsage(WhereMaskSet*, ExprList*); -static Bitmask exprSelectTableUsage(WhereMaskSet*, Select*); -static Bitmask exprTableUsage(WhereMaskSet *pMaskSet, Expr *p){ - Bitmask mask = 0; - if( p==0 ) return 0; - if( p->op==TK_COLUMN ){ - mask = getMask(pMaskSet, p->iTable); - return mask; - } - mask = exprTableUsage(pMaskSet, p->pRight); - mask |= exprTableUsage(pMaskSet, p->pLeft); - if( ExprHasProperty(p, EP_xIsSelect) ){ - mask |= exprSelectTableUsage(pMaskSet, p->x.pSelect); +static int whereLoopAddBtree( + WhereLoopBuilder *pBuilder, /* WHERE clause information */ + Bitmask mExtra /* Extra prerequesites for using this table */ +){ + WhereInfo *pWInfo; /* WHERE analysis context */ + Index *pProbe; /* An index we are evaluating */ + Index sPk; /* A fake index object for the primary key */ + LogEst aiRowEstPk[2]; /* The aiRowLogEst[] value for the sPk index */ + i16 aiColumnPk = -1; /* The aColumn[] value for the sPk index */ + SrcList *pTabList; /* The FROM clause */ + struct SrcList_item *pSrc; /* The FROM clause btree term to add */ + WhereLoop *pNew; /* Template WhereLoop object */ + int rc = SQLITE_OK; /* Return code */ + int iSortIdx = 1; /* Index number */ + int b; /* A boolean value */ + LogEst rSize; /* number of rows in the table */ + LogEst rLogSize; /* Logarithm of the number of rows in the table */ + WhereClause *pWC; /* The parsed WHERE clause */ + Table *pTab; /* Table being queried */ + + pNew = pBuilder->pNew; + pWInfo = pBuilder->pWInfo; + pTabList = pWInfo->pTabList; + pSrc = pTabList->a + pNew->iTab; + pTab = pSrc->pTab; + pWC = pBuilder->pWC; + assert( !IsVirtual(pSrc->pTab) ); + + if( pSrc->pIndex ){ + /* An INDEXED BY clause specifies a particular index to use */ + pProbe = pSrc->pIndex; + }else if( !HasRowid(pTab) ){ + pProbe = pTab->pIndex; }else{ - mask |= exprListTableUsage(pMaskSet, p->x.pList); + /* There is no INDEXED BY clause. Create a fake Index object in local + ** variable sPk to represent the rowid primary key index. Make this + ** fake index the first in a chain of Index objects with all of the real + ** indices to follow */ + Index *pFirst; /* First of real indices on the table */ + memset(&sPk, 0, sizeof(Index)); + sPk.nKeyCol = 1; + sPk.nColumn = 1; + sPk.aiColumn = &aiColumnPk; + sPk.aiRowLogEst = aiRowEstPk; + sPk.onError = OE_Replace; + sPk.pTable = pTab; + sPk.szIdxRow = pTab->szTabRow; + aiRowEstPk[0] = pTab->nRowLogEst; + aiRowEstPk[1] = 0; + pFirst = pSrc->pTab->pIndex; + if( pSrc->notIndexed==0 ){ + /* The real indices of the table are only considered if the + ** NOT INDEXED qualifier is omitted from the FROM clause */ + sPk.pNext = pFirst; + } + pProbe = &sPk; } - return mask; -} -static Bitmask exprListTableUsage(WhereMaskSet *pMaskSet, ExprList *pList){ - int i; - Bitmask mask = 0; - if( pList ){ - for(i=0; inExpr; i++){ - mask |= exprTableUsage(pMaskSet, pList->a[i].pExpr); + rSize = pTab->nRowLogEst; + rLogSize = estLog(rSize); + +#ifndef SQLITE_OMIT_AUTOMATIC_INDEX + /* Automatic indexes */ + if( !pBuilder->pOrSet + && (pWInfo->pParse->db->flags & SQLITE_AutoIndex)!=0 + && pSrc->pIndex==0 + && !pSrc->viaCoroutine + && !pSrc->notIndexed + && HasRowid(pTab) + && !pSrc->isCorrelated + && !pSrc->isRecursive + ){ + /* Generate auto-index WhereLoops */ + WhereTerm *pTerm; + WhereTerm *pWCEnd = pWC->a + pWC->nTerm; + for(pTerm=pWC->a; rc==SQLITE_OK && pTermprereqRight & pNew->maskSelf ) continue; + if( termCanDriveIndex(pTerm, pSrc, 0) ){ + pNew->u.btree.nEq = 1; + pNew->u.btree.nSkip = 0; + pNew->u.btree.pIndex = 0; + pNew->nLTerm = 1; + pNew->aLTerm[0] = pTerm; + /* TUNING: One-time cost for computing the automatic index is + ** estimated to be X*N*log2(N) where N is the number of rows in + ** the table being indexed and where X is 7 (LogEst=28) for normal + ** tables or 1.375 (LogEst=4) for views and subqueries. The value + ** of X is smaller for views and subqueries so that the query planner + ** will be more aggressive about generating automatic indexes for + ** those objects, since there is no opportunity to add schema + ** indexes on subqueries and views. */ + pNew->rSetup = rLogSize + rSize + 4; + if( pTab->pSelect==0 && (pTab->tabFlags & TF_Ephemeral)==0 ){ + pNew->rSetup += 24; + } + ApplyCostMultiplier(pNew->rSetup, pTab->costMult); + /* TUNING: Each index lookup yields 20 rows in the table. This + ** is more than the usual guess of 10 rows, since we have no way + ** of knowing how selective the index will ultimately be. It would + ** not be unreasonable to make this value much larger. */ + pNew->nOut = 43; assert( 43==sqlite3LogEst(20) ); + pNew->rRun = sqlite3LogEstAdd(rLogSize,pNew->nOut); + pNew->wsFlags = WHERE_AUTO_INDEX; + pNew->prereq = mExtra | pTerm->prereqRight; + rc = whereLoopInsert(pBuilder, pNew); + } } } - return mask; -} -static Bitmask exprSelectTableUsage(WhereMaskSet *pMaskSet, Select *pS){ - Bitmask mask = 0; - while( pS ){ - mask |= exprListTableUsage(pMaskSet, pS->pEList); - mask |= exprListTableUsage(pMaskSet, pS->pGroupBy); - mask |= exprListTableUsage(pMaskSet, pS->pOrderBy); - mask |= exprTableUsage(pMaskSet, pS->pWhere); - mask |= exprTableUsage(pMaskSet, pS->pHaving); - pS = pS->pPrior; +#endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ + + /* Loop over all indices + */ + for(; rc==SQLITE_OK && pProbe; pProbe=pProbe->pNext, iSortIdx++){ + if( pProbe->pPartIdxWhere!=0 + && !whereUsablePartialIndex(pSrc->iCursor, pWC, pProbe->pPartIdxWhere) ){ + testcase( pNew->iTab!=pSrc->iCursor ); /* See ticket [98d973b8f5] */ + continue; /* Partial index inappropriate for this query */ + } + rSize = pProbe->aiRowLogEst[0]; + pNew->u.btree.nEq = 0; + pNew->u.btree.nSkip = 0; + pNew->nLTerm = 0; + pNew->iSortIdx = 0; + pNew->rSetup = 0; + pNew->prereq = mExtra; + pNew->nOut = rSize; + pNew->u.btree.pIndex = pProbe; + b = indexMightHelpWithOrderBy(pBuilder, pProbe, pSrc->iCursor); + /* The ONEPASS_DESIRED flags never occurs together with ORDER BY */ + assert( (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || b==0 ); + if( pProbe->tnum<=0 ){ + /* Integer primary key index */ + pNew->wsFlags = WHERE_IPK; + + /* Full table scan */ + pNew->iSortIdx = b ? iSortIdx : 0; + /* TUNING: Cost of full table scan is (N*3.0). */ + pNew->rRun = rSize + 16; + ApplyCostMultiplier(pNew->rRun, pTab->costMult); + whereLoopOutputAdjust(pWC, pNew, rSize); + rc = whereLoopInsert(pBuilder, pNew); + pNew->nOut = rSize; + if( rc ) break; + }else{ + Bitmask m; + if( pProbe->isCovering ){ + pNew->wsFlags = WHERE_IDX_ONLY | WHERE_INDEXED; + m = 0; + }else{ + m = pSrc->colUsed & ~columnsInIndex(pProbe); + pNew->wsFlags = (m==0) ? (WHERE_IDX_ONLY|WHERE_INDEXED) : WHERE_INDEXED; + } + + /* Full scan via index */ + if( b + || !HasRowid(pTab) + || ( m==0 + && pProbe->bUnordered==0 + && (pProbe->szIdxRowszTabRow) + && (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 + && sqlite3GlobalConfig.bUseCis + && OptimizationEnabled(pWInfo->pParse->db, SQLITE_CoverIdxScan) + ) + ){ + pNew->iSortIdx = b ? iSortIdx : 0; + + /* The cost of visiting the index rows is N*K, where K is + ** between 1.1 and 3.0, depending on the relative sizes of the + ** index and table rows. If this is a non-covering index scan, + ** also add the cost of visiting table rows (N*3.0). */ + pNew->rRun = rSize + 1 + (15*pProbe->szIdxRow)/pTab->szTabRow; + if( m!=0 ){ + pNew->rRun = sqlite3LogEstAdd(pNew->rRun, rSize+16); + } + ApplyCostMultiplier(pNew->rRun, pTab->costMult); + whereLoopOutputAdjust(pWC, pNew, rSize); + rc = whereLoopInsert(pBuilder, pNew); + pNew->nOut = rSize; + if( rc ) break; + } + } + + rc = whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, 0); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3Stat4ProbeFree(pBuilder->pRec); + pBuilder->nRecValid = 0; + pBuilder->pRec = 0; +#endif + + /* If there was an INDEXED BY clause, then only that one index is + ** considered. */ + if( pSrc->pIndex ) break; } - return mask; + return rc; } +#ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Return TRUE if the given operator is one of the operators that is -** allowed for an indexable WHERE clause term. The allowed operators are -** "=", "<", ">", "<=", ">=", and "IN". -** -** IMPLEMENTATION-OF: R-59926-26393 To be usable by an index a term must be -** of one of the following forms: column = expression column > expression -** column >= expression column < expression column <= expression -** expression = column expression > column expression >= column -** expression < column expression <= column column IN -** (expression-list) column IN (subquery) column IS NULL +** Add all WhereLoop objects for a table of the join identified by +** pBuilder->pNew->iTab. That table is guaranteed to be a virtual table. */ -static int allowedOp(int op){ - assert( TK_GT>TK_EQ && TK_GTTK_EQ && TK_LTTK_EQ && TK_LE=TK_EQ && op<=TK_GE) || op==TK_ISNULL; +static int whereLoopAddVirtual( + WhereLoopBuilder *pBuilder, /* WHERE clause information */ + Bitmask mExtra +){ + WhereInfo *pWInfo; /* WHERE analysis context */ + Parse *pParse; /* The parsing context */ + WhereClause *pWC; /* The WHERE clause */ + struct SrcList_item *pSrc; /* The FROM clause term to search */ + Table *pTab; + sqlite3 *db; + sqlite3_index_info *pIdxInfo; + struct sqlite3_index_constraint *pIdxCons; + struct sqlite3_index_constraint_usage *pUsage; + WhereTerm *pTerm; + int i, j; + int iTerm, mxTerm; + int nConstraint; + int seenIn = 0; /* True if an IN operator is seen */ + int seenVar = 0; /* True if a non-constant constraint is seen */ + int iPhase; /* 0: const w/o IN, 1: const, 2: no IN, 2: IN */ + WhereLoop *pNew; + int rc = SQLITE_OK; + + pWInfo = pBuilder->pWInfo; + pParse = pWInfo->pParse; + db = pParse->db; + pWC = pBuilder->pWC; + pNew = pBuilder->pNew; + pSrc = &pWInfo->pTabList->a[pNew->iTab]; + pTab = pSrc->pTab; + assert( IsVirtual(pTab) ); + pIdxInfo = allocateIndexInfo(pParse, pWC, pSrc, pBuilder->pOrderBy); + if( pIdxInfo==0 ) return SQLITE_NOMEM; + pNew->prereq = 0; + pNew->rSetup = 0; + pNew->wsFlags = WHERE_VIRTUALTABLE; + pNew->nLTerm = 0; + pNew->u.vtab.needFree = 0; + pUsage = pIdxInfo->aConstraintUsage; + nConstraint = pIdxInfo->nConstraint; + if( whereLoopResize(db, pNew, nConstraint) ){ + sqlite3DbFree(db, pIdxInfo); + return SQLITE_NOMEM; + } + + for(iPhase=0; iPhase<=3; iPhase++){ + if( !seenIn && (iPhase&1)!=0 ){ + iPhase++; + if( iPhase>3 ) break; + } + if( !seenVar && iPhase>1 ) break; + pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pIdxCons++){ + j = pIdxCons->iTermOffset; + pTerm = &pWC->a[j]; + switch( iPhase ){ + case 0: /* Constants without IN operator */ + pIdxCons->usable = 0; + if( (pTerm->eOperator & WO_IN)!=0 ){ + seenIn = 1; + } + if( pTerm->prereqRight!=0 ){ + seenVar = 1; + }else if( (pTerm->eOperator & WO_IN)==0 ){ + pIdxCons->usable = 1; + } + break; + case 1: /* Constants with IN operators */ + assert( seenIn ); + pIdxCons->usable = (pTerm->prereqRight==0); + break; + case 2: /* Variables without IN */ + assert( seenVar ); + pIdxCons->usable = (pTerm->eOperator & WO_IN)==0; + break; + default: /* Variables with IN */ + assert( seenVar && seenIn ); + pIdxCons->usable = 1; + break; + } + } + memset(pUsage, 0, sizeof(pUsage[0])*pIdxInfo->nConstraint); + if( pIdxInfo->needToFreeIdxStr ) sqlite3_free(pIdxInfo->idxStr); + pIdxInfo->idxStr = 0; + pIdxInfo->idxNum = 0; + pIdxInfo->needToFreeIdxStr = 0; + pIdxInfo->orderByConsumed = 0; + pIdxInfo->estimatedCost = SQLITE_BIG_DBL / (double)2; + pIdxInfo->estimatedRows = 25; + rc = vtabBestIndex(pParse, pTab, pIdxInfo); + if( rc ) goto whereLoopAddVtab_exit; + pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint; + pNew->prereq = mExtra; + mxTerm = -1; + assert( pNew->nLSlot>=nConstraint ); + for(i=0; iaLTerm[i] = 0; + pNew->u.vtab.omitMask = 0; + for(i=0; i=0 ){ + j = pIdxCons->iTermOffset; + if( iTerm>=nConstraint + || j<0 + || j>=pWC->nTerm + || pNew->aLTerm[iTerm]!=0 + ){ + rc = SQLITE_ERROR; + sqlite3ErrorMsg(pParse, "%s.xBestIndex() malfunction", pTab->zName); + goto whereLoopAddVtab_exit; + } + testcase( iTerm==nConstraint-1 ); + testcase( j==0 ); + testcase( j==pWC->nTerm-1 ); + pTerm = &pWC->a[j]; + pNew->prereq |= pTerm->prereqRight; + assert( iTermnLSlot ); + pNew->aLTerm[iTerm] = pTerm; + if( iTerm>mxTerm ) mxTerm = iTerm; + testcase( iTerm==15 ); + testcase( iTerm==16 ); + if( iTerm<16 && pUsage[i].omit ) pNew->u.vtab.omitMask |= 1<eOperator & WO_IN)!=0 ){ + if( pUsage[i].omit==0 ){ + /* Do not attempt to use an IN constraint if the virtual table + ** says that the equivalent EQ constraint cannot be safely omitted. + ** If we do attempt to use such a constraint, some rows might be + ** repeated in the output. */ + break; + } + /* A virtual table that is constrained by an IN clause may not + ** consume the ORDER BY clause because (1) the order of IN terms + ** is not necessarily related to the order of output terms and + ** (2) Multiple outputs from a single IN value will not merge + ** together. */ + pIdxInfo->orderByConsumed = 0; + } + } + } + if( i>=nConstraint ){ + pNew->nLTerm = mxTerm+1; + assert( pNew->nLTerm<=pNew->nLSlot ); + pNew->u.vtab.idxNum = pIdxInfo->idxNum; + pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr; + pIdxInfo->needToFreeIdxStr = 0; + pNew->u.vtab.idxStr = pIdxInfo->idxStr; + pNew->u.vtab.isOrdered = (i8)(pIdxInfo->orderByConsumed ? + pIdxInfo->nOrderBy : 0); + pNew->rSetup = 0; + pNew->rRun = sqlite3LogEstFromDouble(pIdxInfo->estimatedCost); + pNew->nOut = sqlite3LogEst(pIdxInfo->estimatedRows); + whereLoopInsert(pBuilder, pNew); + if( pNew->u.vtab.needFree ){ + sqlite3_free(pNew->u.vtab.idxStr); + pNew->u.vtab.needFree = 0; + } + } + } + +whereLoopAddVtab_exit: + if( pIdxInfo->needToFreeIdxStr ) sqlite3_free(pIdxInfo->idxStr); + sqlite3DbFree(db, pIdxInfo); + return rc; } +#endif /* SQLITE_OMIT_VIRTUALTABLE */ /* -** Swap two objects of type TYPE. +** Add WhereLoop entries to handle OR terms. This works for either +** btrees or virtual tables. */ -#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} +static int whereLoopAddOr(WhereLoopBuilder *pBuilder, Bitmask mExtra){ + WhereInfo *pWInfo = pBuilder->pWInfo; + WhereClause *pWC; + WhereLoop *pNew; + WhereTerm *pTerm, *pWCEnd; + int rc = SQLITE_OK; + int iCur; + WhereClause tempWC; + WhereLoopBuilder sSubBuild; + WhereOrSet sSum, sCur; + struct SrcList_item *pItem; + + pWC = pBuilder->pWC; + pWCEnd = pWC->a + pWC->nTerm; + pNew = pBuilder->pNew; + memset(&sSum, 0, sizeof(sSum)); + pItem = pWInfo->pTabList->a + pNew->iTab; + iCur = pItem->iCursor; + + for(pTerm=pWC->a; pTermeOperator & WO_OR)!=0 + && (pTerm->u.pOrInfo->indexable & pNew->maskSelf)!=0 + ){ + WhereClause * const pOrWC = &pTerm->u.pOrInfo->wc; + WhereTerm * const pOrWCEnd = &pOrWC->a[pOrWC->nTerm]; + WhereTerm *pOrTerm; + int once = 1; + int i, j; + + sSubBuild = *pBuilder; + sSubBuild.pOrderBy = 0; + sSubBuild.pOrSet = &sCur; -/* -** Commute a comparison operator. Expressions of the form "X op Y" -** are converted into "Y op X". -** -** If a collation sequence is associated with either the left or right -** side of the comparison, it remains associated with the same side after -** the commutation. So "Y collate NOCASE op X" becomes -** "X collate NOCASE op Y". This is because any collation sequence on -** the left hand side of a comparison overrides any collation sequence -** attached to the right. For the same reason the EP_ExpCollate flag -** is not commuted. -*/ -static void exprCommute(Parse *pParse, Expr *pExpr){ - u16 expRight = (pExpr->pRight->flags & EP_ExpCollate); - u16 expLeft = (pExpr->pLeft->flags & EP_ExpCollate); - assert( allowedOp(pExpr->op) && pExpr->op!=TK_IN ); - pExpr->pRight->pColl = sqlite3ExprCollSeq(pParse, pExpr->pRight); - pExpr->pLeft->pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft); - SWAP(CollSeq*,pExpr->pRight->pColl,pExpr->pLeft->pColl); - pExpr->pRight->flags = (pExpr->pRight->flags & ~EP_ExpCollate) | expLeft; - pExpr->pLeft->flags = (pExpr->pLeft->flags & ~EP_ExpCollate) | expRight; - SWAP(Expr*,pExpr->pRight,pExpr->pLeft); - if( pExpr->op>=TK_GT ){ - assert( TK_LT==TK_GT+2 ); - assert( TK_GE==TK_LE+2 ); - assert( TK_GT>TK_EQ ); - assert( TK_GTop>=TK_GT && pExpr->op<=TK_GE ); - pExpr->op = ((pExpr->op-TK_GT)^2)+TK_GT; + WHERETRACE(0x200, ("Begin processing OR-clause %p\n", pTerm)); + for(pOrTerm=pOrWC->a; pOrTermeOperator & WO_AND)!=0 ){ + sSubBuild.pWC = &pOrTerm->u.pAndInfo->wc; + }else if( pOrTerm->leftCursor==iCur ){ + tempWC.pWInfo = pWC->pWInfo; + tempWC.pOuter = pWC; + tempWC.op = TK_AND; + tempWC.nTerm = 1; + tempWC.a = pOrTerm; + sSubBuild.pWC = &tempWC; + }else{ + continue; + } + sCur.n = 0; +#ifdef WHERETRACE_ENABLED + WHERETRACE(0x200, ("OR-term %d of %p has %d subterms:\n", + (int)(pOrTerm-pOrWC->a), pTerm, sSubBuild.pWC->nTerm)); + if( sqlite3WhereTrace & 0x400 ){ + for(i=0; inTerm; i++){ + whereTermPrint(&sSubBuild.pWC->a[i], i); + } + } +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pItem->pTab) ){ + rc = whereLoopAddVirtual(&sSubBuild, mExtra); + }else +#endif + { + rc = whereLoopAddBtree(&sSubBuild, mExtra); + } + if( rc==SQLITE_OK ){ + rc = whereLoopAddOr(&sSubBuild, mExtra); + } + assert( rc==SQLITE_OK || sCur.n==0 ); + if( sCur.n==0 ){ + sSum.n = 0; + break; + }else if( once ){ + whereOrMove(&sSum, &sCur); + once = 0; + }else{ + WhereOrSet sPrev; + whereOrMove(&sPrev, &sSum); + sSum.n = 0; + for(i=0; inLTerm = 1; + pNew->aLTerm[0] = pTerm; + pNew->wsFlags = WHERE_MULTI_OR; + pNew->rSetup = 0; + pNew->iSortIdx = 0; + memset(&pNew->u, 0, sizeof(pNew->u)); + for(i=0; rc==SQLITE_OK && irRun = sSum.a[i].rRun + 1; + pNew->nOut = sSum.a[i].nOut; + pNew->prereq = sSum.a[i].prereq; + rc = whereLoopInsert(pBuilder, pNew); + } + WHERETRACE(0x200, ("End processing OR-clause %p\n", pTerm)); + } } + return rc; } /* -** Translate from TK_xx operator to WO_xx bitmask. +** Add all WhereLoop objects for all tables */ -static u16 operatorMask(int op){ - u16 c; - assert( allowedOp(op) ); - if( op==TK_IN ){ - c = WO_IN; - }else if( op==TK_ISNULL ){ - c = WO_ISNULL; - }else{ - assert( (WO_EQ<<(op-TK_EQ)) < 0x7fff ); - c = (u16)(WO_EQ<<(op-TK_EQ)); +static int whereLoopAddAll(WhereLoopBuilder *pBuilder){ + WhereInfo *pWInfo = pBuilder->pWInfo; + Bitmask mExtra = 0; + Bitmask mPrior = 0; + int iTab; + SrcList *pTabList = pWInfo->pTabList; + struct SrcList_item *pItem; + sqlite3 *db = pWInfo->pParse->db; + int nTabList = pWInfo->nLevel; + int rc = SQLITE_OK; + u8 priorJoinType = 0; + WhereLoop *pNew; + + /* Loop over the tables in the join, from left to right */ + pNew = pBuilder->pNew; + whereLoopInit(pNew); + for(iTab=0, pItem=pTabList->a; iTabiTab = iTab; + pNew->maskSelf = getMask(&pWInfo->sMaskSet, pItem->iCursor); + if( ((pItem->jointype|priorJoinType) & (JT_LEFT|JT_CROSS))!=0 ){ + mExtra = mPrior; + } + priorJoinType = pItem->jointype; + if( IsVirtual(pItem->pTab) ){ + rc = whereLoopAddVirtual(pBuilder, mExtra); + }else{ + rc = whereLoopAddBtree(pBuilder, mExtra); + } + if( rc==SQLITE_OK ){ + rc = whereLoopAddOr(pBuilder, mExtra); + } + mPrior |= pNew->maskSelf; + if( rc || db->mallocFailed ) break; } - assert( op!=TK_ISNULL || c==WO_ISNULL ); - assert( op!=TK_IN || c==WO_IN ); - assert( op!=TK_EQ || c==WO_EQ ); - assert( op!=TK_LT || c==WO_LT ); - assert( op!=TK_LE || c==WO_LE ); - assert( op!=TK_GT || c==WO_GT ); - assert( op!=TK_GE || c==WO_GE ); - return c; + whereLoopClear(db, pNew); + return rc; } /* -** Search for a term in the WHERE clause that is of the form "X " -** where X is a reference to the iColumn of table iCur and is one of -** the WO_xx operator codes specified by the op parameter. -** Return a pointer to the term. Return 0 if not found. -*/ -static WhereTerm *findTerm( - WhereClause *pWC, /* The WHERE clause to be searched */ - int iCur, /* Cursor number of LHS */ - int iColumn, /* Column number of LHS */ - Bitmask notReady, /* RHS must not overlap with this mask */ - u32 op, /* Mask of WO_xx values describing operator */ - Index *pIdx /* Must be compatible with this index, if not NULL */ -){ - WhereTerm *pTerm; - int k; - assert( iCur>=0 ); - op &= WO_ALL; - for(pTerm=pWC->a, k=pWC->nTerm; k; k--, pTerm++){ - if( pTerm->leftCursor==iCur - && (pTerm->prereqRight & notReady)==0 - && pTerm->u.leftColumn==iColumn - && (pTerm->eOperator & op)!=0 - ){ - if( pIdx && pTerm->eOperator!=WO_ISNULL ){ - Expr *pX = pTerm->pExpr; - CollSeq *pColl; - char idxaff; - int j; - Parse *pParse = pWC->pParse; +** Examine a WherePath (with the addition of the extra WhereLoop of the 5th +** parameters) to see if it outputs rows in the requested ORDER BY +** (or GROUP BY) without requiring a separate sort operation. Return N: +** +** N>0: N terms of the ORDER BY clause are satisfied +** N==0: No terms of the ORDER BY clause are satisfied +** N<0: Unknown yet how many terms of ORDER BY might be satisfied. +** +** Note that processing for WHERE_GROUPBY and WHERE_DISTINCTBY is not as +** strict. With GROUP BY and DISTINCT the only requirement is that +** equivalent rows appear immediately adjacent to one another. GROUP BY +** and DISTINCT do not require rows to appear in any particular order as long +** as equivalent rows are grouped together. Thus for GROUP BY and DISTINCT +** the pOrderBy terms can be matched in any order. With ORDER BY, the +** pOrderBy terms must be matched in strict left-to-right order. +*/ +static i8 wherePathSatisfiesOrderBy( + WhereInfo *pWInfo, /* The WHERE clause */ + ExprList *pOrderBy, /* ORDER BY or GROUP BY or DISTINCT clause to check */ + WherePath *pPath, /* The WherePath to check */ + u16 wctrlFlags, /* Might contain WHERE_GROUPBY or WHERE_DISTINCTBY */ + u16 nLoop, /* Number of entries in pPath->aLoop[] */ + WhereLoop *pLast, /* Add this WhereLoop to the end of pPath->aLoop[] */ + Bitmask *pRevMask /* OUT: Mask of WhereLoops to run in reverse order */ +){ + u8 revSet; /* True if rev is known */ + u8 rev; /* Composite sort order */ + u8 revIdx; /* Index sort order */ + u8 isOrderDistinct; /* All prior WhereLoops are order-distinct */ + u8 distinctColumns; /* True if the loop has UNIQUE NOT NULL columns */ + u8 isMatch; /* iColumn matches a term of the ORDER BY clause */ + u16 nKeyCol; /* Number of key columns in pIndex */ + u16 nColumn; /* Total number of ordered columns in the index */ + u16 nOrderBy; /* Number terms in the ORDER BY clause */ + int iLoop; /* Index of WhereLoop in pPath being processed */ + int i, j; /* Loop counters */ + int iCur; /* Cursor number for current WhereLoop */ + int iColumn; /* A column number within table iCur */ + WhereLoop *pLoop = 0; /* Current WhereLoop being processed. */ + WhereTerm *pTerm; /* A single term of the WHERE clause */ + Expr *pOBExpr; /* An expression from the ORDER BY clause */ + CollSeq *pColl; /* COLLATE function from an ORDER BY clause term */ + Index *pIndex; /* The index associated with pLoop */ + sqlite3 *db = pWInfo->pParse->db; /* Database connection */ + Bitmask obSat = 0; /* Mask of ORDER BY terms satisfied so far */ + Bitmask obDone; /* Mask of all ORDER BY terms */ + Bitmask orderDistinctMask; /* Mask of all well-ordered loops */ + Bitmask ready; /* Mask of inner loops */ + + /* + ** We say the WhereLoop is "one-row" if it generates no more than one + ** row of output. A WhereLoop is one-row if all of the following are true: + ** (a) All index columns match with WHERE_COLUMN_EQ. + ** (b) The index is unique + ** Any WhereLoop with an WHERE_COLUMN_EQ constraint on the rowid is one-row. + ** Every one-row WhereLoop will have the WHERE_ONEROW bit set in wsFlags. + ** + ** We say the WhereLoop is "order-distinct" if the set of columns from + ** that WhereLoop that are in the ORDER BY clause are different for every + ** row of the WhereLoop. Every one-row WhereLoop is automatically + ** order-distinct. A WhereLoop that has no columns in the ORDER BY clause + ** is not order-distinct. To be order-distinct is not quite the same as being + ** UNIQUE since a UNIQUE column or index can have multiple rows that + ** are NULL and NULL values are equivalent for the purpose of order-distinct. + ** To be order-distinct, the columns must be UNIQUE and NOT NULL. + ** + ** The rowid for a table is always UNIQUE and NOT NULL so whenever the + ** rowid appears in the ORDER BY clause, the corresponding WhereLoop is + ** automatically order-distinct. + */ + + assert( pOrderBy!=0 ); + if( nLoop && OptimizationDisabled(db, SQLITE_OrderByIdxJoin) ) return 0; + + nOrderBy = pOrderBy->nExpr; + testcase( nOrderBy==BMS-1 ); + if( nOrderBy>BMS-1 ) return 0; /* Cannot optimize overly large ORDER BYs */ + isOrderDistinct = 1; + obDone = MASKBIT(nOrderBy)-1; + orderDistinctMask = 0; + ready = 0; + for(iLoop=0; isOrderDistinct && obSat0 ) ready |= pLoop->maskSelf; + pLoop = iLoopaLoop[iLoop] : pLast; + if( pLoop->wsFlags & WHERE_VIRTUALTABLE ){ + if( pLoop->u.vtab.isOrdered ) obSat = obDone; + break; + } + iCur = pWInfo->pTabList->a[pLoop->iTab].iCursor; + + /* Mark off any ORDER BY term X that is a column in the table of + ** the current loop for which there is term in the WHERE + ** clause of the form X IS NULL or X=? that reference only outer + ** loops. + */ + for(i=0; ia[i].pExpr); + if( pOBExpr->op!=TK_COLUMN ) continue; + if( pOBExpr->iTable!=iCur ) continue; + pTerm = findTerm(&pWInfo->sWC, iCur, pOBExpr->iColumn, + ~ready, WO_EQ|WO_ISNULL, 0); + if( pTerm==0 ) continue; + if( (pTerm->eOperator&WO_EQ)!=0 && pOBExpr->iColumn>=0 ){ + const char *z1, *z2; + pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); + if( !pColl ) pColl = db->pDfltColl; + z1 = pColl->zName; + pColl = sqlite3ExprCollSeq(pWInfo->pParse, pTerm->pExpr); + if( !pColl ) pColl = db->pDfltColl; + z2 = pColl->zName; + if( sqlite3StrICmp(z1, z2)!=0 ) continue; + } + obSat |= MASKBIT(i); + } + + if( (pLoop->wsFlags & WHERE_ONEROW)==0 ){ + if( pLoop->wsFlags & WHERE_IPK ){ + pIndex = 0; + nKeyCol = 0; + nColumn = 1; + }else if( (pIndex = pLoop->u.btree.pIndex)==0 || pIndex->bUnordered ){ + return 0; + }else{ + nKeyCol = pIndex->nKeyCol; + nColumn = pIndex->nColumn; + assert( nColumn==nKeyCol+1 || !HasRowid(pIndex->pTable) ); + assert( pIndex->aiColumn[nColumn-1]==(-1) || !HasRowid(pIndex->pTable)); + isOrderDistinct = IsUniqueIndex(pIndex); + } + + /* Loop through all columns of the index and deal with the ones + ** that are not constrained by == or IN. + */ + rev = revSet = 0; + distinctColumns = 0; + for(j=0; ju.btree.nEq + && pLoop->u.btree.nSkip==0 + && ((i = pLoop->aLTerm[j]->eOperator) & (WO_EQ|WO_ISNULL))!=0 + ){ + if( i & WO_ISNULL ){ + testcase( isOrderDistinct ); + isOrderDistinct = 0; + } + continue; + } - idxaff = pIdx->pTable->aCol[iColumn].affinity; - if( !sqlite3IndexAffinityOk(pX, idxaff) ) continue; + /* Get the column number in the table (iColumn) and sort order + ** (revIdx) for the j-th column of the index. + */ + if( pIndex ){ + iColumn = pIndex->aiColumn[j]; + revIdx = pIndex->aSortOrder[j]; + if( iColumn==pIndex->pTable->iPKey ) iColumn = -1; + }else{ + iColumn = -1; + revIdx = 0; + } - /* Figure out the collation sequence required from an index for - ** it to be useful for optimising expression pX. Store this - ** value in variable pColl. + /* An unconstrained column that might be NULL means that this + ** WhereLoop is not well-ordered */ - assert(pX->pLeft); - pColl = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pX->pRight); - assert(pColl || pParse->nErr); + if( isOrderDistinct + && iColumn>=0 + && j>=pLoop->u.btree.nEq + && pIndex->pTable->aCol[iColumn].notNull==0 + ){ + isOrderDistinct = 0; + } + + /* Find the ORDER BY term that corresponds to the j-th column + ** of the index and mark that ORDER BY term off + */ + bOnce = 1; + isMatch = 0; + for(i=0; bOnce && ia[i].pExpr); + testcase( wctrlFlags & WHERE_GROUPBY ); + testcase( wctrlFlags & WHERE_DISTINCTBY ); + if( (wctrlFlags & (WHERE_GROUPBY|WHERE_DISTINCTBY))==0 ) bOnce = 0; + if( pOBExpr->op!=TK_COLUMN ) continue; + if( pOBExpr->iTable!=iCur ) continue; + if( pOBExpr->iColumn!=iColumn ) continue; + if( iColumn>=0 ){ + pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); + if( !pColl ) pColl = db->pDfltColl; + if( sqlite3StrICmp(pColl->zName, pIndex->azColl[j])!=0 ) continue; + } + isMatch = 1; + break; + } + if( isMatch && (wctrlFlags & WHERE_GROUPBY)==0 ){ + /* Make sure the sort order is compatible in an ORDER BY clause. + ** Sort order is irrelevant for a GROUP BY clause. */ + if( revSet ){ + if( (rev ^ revIdx)!=pOrderBy->a[i].sortOrder ) isMatch = 0; + }else{ + rev = revIdx ^ pOrderBy->a[i].sortOrder; + if( rev ) *pRevMask |= MASKBIT(iLoop); + revSet = 1; + } + } + if( isMatch ){ + if( iColumn<0 ){ + testcase( distinctColumns==0 ); + distinctColumns = 1; + } + obSat |= MASKBIT(i); + }else{ + /* No match found */ + if( j==0 || jaiColumn[j]!=iColumn; j++){ - if( NEVER(j>=pIdx->nColumn) ) return 0; + /* Mark off any other ORDER BY terms that reference pLoop */ + if( isOrderDistinct ){ + orderDistinctMask |= pLoop->maskSelf; + for(i=0; ia[i].pExpr; + mTerm = exprTableUsage(&pWInfo->sMaskSet,p); + if( mTerm==0 && !sqlite3ExprIsConstant(p) ) continue; + if( (mTerm&~orderDistinctMask)==0 ){ + obSat |= MASKBIT(i); } - if( pColl && sqlite3StrICmp(pColl->zName, pIdx->azColl[j]) ) continue; } - return pTerm; } + } /* End the loop over all WhereLoops from outer-most down to inner-most */ + if( obSat==obDone ) return (i8)nOrderBy; + if( !isOrderDistinct ){ + for(i=nOrderBy-1; i>0; i--){ + Bitmask m = MASKBIT(i) - 1; + if( (obSat&m)==m ) return i; + } + return 0; } - return 0; + return -1; } -/* Forward reference */ -static void exprAnalyze(SrcList*, WhereClause*, int); /* -** Call exprAnalyze on all terms in a WHERE clause. +** If the WHERE_GROUPBY flag is set in the mask passed to sqlite3WhereBegin(), +** the planner assumes that the specified pOrderBy list is actually a GROUP +** BY clause - and so any order that groups rows as required satisfies the +** request. ** +** Normally, in this case it is not possible for the caller to determine +** whether or not the rows are really being delivered in sorted order, or +** just in some other order that provides the required grouping. However, +** if the WHERE_SORTBYGROUP flag is also passed to sqlite3WhereBegin(), then +** this function may be called on the returned WhereInfo object. It returns +** true if the rows really will be sorted in the specified order, or false +** otherwise. +** +** For example, assuming: +** +** CREATE INDEX i1 ON t1(x, Y); +** +** then ** +** SELECT * FROM t1 GROUP BY x,y ORDER BY x,y; -- IsSorted()==1 +** SELECT * FROM t1 GROUP BY y,x ORDER BY y,x; -- IsSorted()==0 */ -static void exprAnalyzeAll( - SrcList *pTabList, /* the FROM clause */ - WhereClause *pWC /* the WHERE clause to be analyzed */ -){ +SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo *pWInfo){ + assert( pWInfo->wctrlFlags & WHERE_GROUPBY ); + assert( pWInfo->wctrlFlags & WHERE_SORTBYGROUP ); + return pWInfo->sorted; +} + +#ifdef WHERETRACE_ENABLED +/* For debugging use only: */ +static const char *wherePathName(WherePath *pPath, int nLoop, WhereLoop *pLast){ + static char zName[65]; int i; - for(i=pWC->nTerm-1; i>=0; i--){ - exprAnalyze(pTabList, pWC, i); + for(i=0; iaLoop[i]->cId; } + if( pLast ) zName[i++] = pLast->cId; + zName[i] = 0; + return zName; +} +#endif + +/* +** Return the cost of sorting nRow rows, assuming that the keys have +** nOrderby columns and that the first nSorted columns are already in +** order. +*/ +static LogEst whereSortingCost( + WhereInfo *pWInfo, + LogEst nRow, + int nOrderBy, + int nSorted +){ + /* TUNING: Estimated cost of a full external sort, where N is + ** the number of rows to sort is: + ** + ** cost = (3.0 * N * log(N)). + ** + ** Or, if the order-by clause has X terms but only the last Y + ** terms are out of order, then block-sorting will reduce the + ** sorting cost to: + ** + ** cost = (3.0 * N * log(N)) * (Y/X) + ** + ** The (Y/X) term is implemented using stack variable rScale + ** below. */ + LogEst rScale, rSortCost; + assert( nOrderBy>0 && 66==sqlite3LogEst(100) ); + rScale = sqlite3LogEst((nOrderBy-nSorted)*100/nOrderBy) - 66; + rSortCost = nRow + estLog(nRow) + rScale + 16; + + /* TUNING: The cost of implementing DISTINCT using a B-TREE is + ** similar but with a larger constant of proportionality. + ** Multiply by an additional factor of 3.0. */ + if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){ + rSortCost += 16; } + + return rSortCost; } -#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION /* -** Check to see if the given expression is a LIKE or GLOB operator that -** can be optimized using inequality constraints. Return TRUE if it is -** so and false if not. +** Given the list of WhereLoop objects at pWInfo->pLoops, this routine +** attempts to find the lowest cost path that visits each WhereLoop +** once. This path is then loaded into the pWInfo->a[].pWLoop fields. ** -** In order for the operator to be optimizible, the RHS must be a string -** literal that does not begin with a wildcard. +** Assume that the total number of output rows that will need to be sorted +** will be nRowEst (in the 10*log2 representation). Or, ignore sorting +** costs if nRowEst==0. +** +** Return SQLITE_OK on success or SQLITE_NOMEM of a memory allocation +** error occurs. */ -static int isLikeOrGlob( - Parse *pParse, /* Parsing and code generating context */ - Expr *pExpr, /* Test this expression */ - Expr **ppPrefix, /* Pointer to TK_STRING expression with pattern prefix */ - int *pisComplete, /* True if the only wildcard is % in the last character */ - int *pnoCase /* True if uppercase is equivalent to lowercase */ -){ - const char *z = 0; /* String on RHS of LIKE operator */ - Expr *pRight, *pLeft; /* Right and left size of LIKE operator */ - ExprList *pList; /* List of operands to the LIKE operator */ - int c; /* One character in z[] */ - int cnt; /* Number of non-wildcard prefix characters */ - char wc[3]; /* Wildcard characters */ - sqlite3 *db = pParse->db; /* Database connection */ - sqlite3_value *pVal = 0; - int op; /* Opcode of pRight */ +static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ + int mxChoice; /* Maximum number of simultaneous paths tracked */ + int nLoop; /* Number of terms in the join */ + Parse *pParse; /* Parsing context */ + sqlite3 *db; /* The database connection */ + int iLoop; /* Loop counter over the terms of the join */ + int ii, jj; /* Loop counters */ + int mxI = 0; /* Index of next entry to replace */ + int nOrderBy; /* Number of ORDER BY clause terms */ + LogEst mxCost = 0; /* Maximum cost of a set of paths */ + LogEst mxUnsorted = 0; /* Maximum unsorted cost of a set of path */ + int nTo, nFrom; /* Number of valid entries in aTo[] and aFrom[] */ + WherePath *aFrom; /* All nFrom paths at the previous level */ + WherePath *aTo; /* The nTo best paths at the current level */ + WherePath *pFrom; /* An element of aFrom[] that we are working on */ + WherePath *pTo; /* An element of aTo[] that we are working on */ + WhereLoop *pWLoop; /* One of the WhereLoop objects */ + WhereLoop **pX; /* Used to divy up the pSpace memory */ + LogEst *aSortCost = 0; /* Sorting and partial sorting costs */ + char *pSpace; /* Temporary memory used by this routine */ + int nSpace; /* Bytes of space allocated at pSpace */ - if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, wc) ){ - return 0; - } -#ifdef SQLITE_EBCDIC - if( *pnoCase ) return 0; + pParse = pWInfo->pParse; + db = pParse->db; + nLoop = pWInfo->nLevel; + /* TUNING: For simple queries, only the best path is tracked. + ** For 2-way joins, the 5 best paths are followed. + ** For joins of 3 or more tables, track the 10 best paths */ + mxChoice = (nLoop<=1) ? 1 : (nLoop==2 ? 5 : 10); + assert( nLoop<=pWInfo->pTabList->nSrc ); + WHERETRACE(0x002, ("---- begin solver. (nRowEst=%d)\n", nRowEst)); + + /* If nRowEst is zero and there is an ORDER BY clause, ignore it. In this + ** case the purpose of this call is to estimate the number of rows returned + ** by the overall query. Once this estimate has been obtained, the caller + ** will invoke this function a second time, passing the estimate as the + ** nRowEst parameter. */ + if( pWInfo->pOrderBy==0 || nRowEst==0 ){ + nOrderBy = 0; + }else{ + nOrderBy = pWInfo->pOrderBy->nExpr; + } + + /* Allocate and initialize space for aTo, aFrom and aSortCost[] */ + nSpace = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2; + nSpace += sizeof(LogEst) * nOrderBy; + pSpace = sqlite3DbMallocRaw(db, nSpace); + if( pSpace==0 ) return SQLITE_NOMEM; + aTo = (WherePath*)pSpace; + aFrom = aTo+mxChoice; + memset(aFrom, 0, sizeof(aFrom[0])); + pX = (WhereLoop**)(aFrom+mxChoice); + for(ii=mxChoice*2, pFrom=aTo; ii>0; ii--, pFrom++, pX += nLoop){ + pFrom->aLoop = pX; + } + if( nOrderBy ){ + /* If there is an ORDER BY clause and it is not being ignored, set up + ** space for the aSortCost[] array. Each element of the aSortCost array + ** is either zero - meaning it has not yet been initialized - or the + ** cost of sorting nRowEst rows of data where the first X terms of + ** the ORDER BY clause are already in order, where X is the array + ** index. */ + aSortCost = (LogEst*)pX; + memset(aSortCost, 0, sizeof(LogEst) * nOrderBy); + } + assert( aSortCost==0 || &pSpace[nSpace]==(char*)&aSortCost[nOrderBy] ); + assert( aSortCost!=0 || &pSpace[nSpace]==(char*)pX ); + + /* Seed the search with a single WherePath containing zero WhereLoops. + ** + ** TUNING: Do not let the number of iterations go above 25. If the cost + ** of computing an automatic index is not paid back within the first 25 + ** rows, then do not use the automatic index. */ + aFrom[0].nRow = MIN(pParse->nQueryLoop, 46); assert( 46==sqlite3LogEst(25) ); + nFrom = 1; + assert( aFrom[0].isOrdered==0 ); + if( nOrderBy ){ + /* If nLoop is zero, then there are no FROM terms in the query. Since + ** in this case the query may return a maximum of one row, the results + ** are already in the requested order. Set isOrdered to nOrderBy to + ** indicate this. Or, if nLoop is greater than zero, set isOrdered to + ** -1, indicating that the result set may or may not be ordered, + ** depending on the loops added to the current plan. */ + aFrom[0].isOrdered = nLoop>0 ? -1 : nOrderBy; + } + + /* Compute successively longer WherePaths using the previous generation + ** of WherePaths as the basis for the next. Keep track of the mxChoice + ** best paths at each generation */ + for(iLoop=0; iLooppLoops; pWLoop; pWLoop=pWLoop->pNextLoop){ + LogEst nOut; /* Rows visited by (pFrom+pWLoop) */ + LogEst rCost; /* Cost of path (pFrom+pWLoop) */ + LogEst rUnsorted; /* Unsorted cost of (pFrom+pWLoop) */ + i8 isOrdered = pFrom->isOrdered; /* isOrdered for (pFrom+pWLoop) */ + Bitmask maskNew; /* Mask of src visited by (..) */ + Bitmask revMask = 0; /* Mask of rev-order loops for (..) */ + + if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue; + if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue; + /* At this point, pWLoop is a candidate to be the next loop. + ** Compute its cost */ + rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow); + rUnsorted = sqlite3LogEstAdd(rUnsorted, pFrom->rUnsorted); + nOut = pFrom->nRow + pWLoop->nOut; + maskNew = pFrom->maskLoop | pWLoop->maskSelf; + if( isOrdered<0 ){ + isOrdered = wherePathSatisfiesOrderBy(pWInfo, + pWInfo->pOrderBy, pFrom, pWInfo->wctrlFlags, + iLoop, pWLoop, &revMask); + }else{ + revMask = pFrom->revLoop; + } + if( isOrdered>=0 && isOrderedisOrdered^isOrdered)&0x80)==0" is equivalent + ** to (pTo->isOrdered==(-1))==(isOrdered==(-1))" for the range + ** of legal values for isOrdered, -1..64. + */ + for(jj=0, pTo=aTo; jjmaskLoop==maskNew + && ((pTo->isOrdered^isOrdered)&0x80)==0 + ){ + testcase( jj==nTo-1 ); + break; + } + } + if( jj>=nTo ){ + /* None of the existing best-so-far paths match the candidate. */ + if( nTo>=mxChoice + && (rCost>mxCost || (rCost==mxCost && rUnsorted>=mxUnsorted)) + ){ + /* The current candidate is no better than any of the mxChoice + ** paths currently in the best-so-far buffer. So discard + ** this candidate as not viable. */ +#ifdef WHERETRACE_ENABLED /* 0x4 */ + if( sqlite3WhereTrace&0x4 ){ + sqlite3DebugPrintf("Skip %s cost=%-3d,%3d order=%c\n", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + isOrdered>=0 ? isOrdered+'0' : '?'); + } #endif - pList = pExpr->x.pList; - pLeft = pList->a[1].pExpr; - if( pLeft->op!=TK_COLUMN || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT ){ - /* IMP: R-02065-49465 The left-hand side of the LIKE or GLOB operator must - ** be the name of an indexed column with TEXT affinity. */ - return 0; + continue; + } + /* If we reach this points it means that the new candidate path + ** needs to be added to the set of best-so-far paths. */ + if( nTo=0 ? isOrdered+'0' : '?'); + } +#endif + }else{ + /* Control reaches here if best-so-far path pTo=aTo[jj] covers the + ** same set of loops and has the sam isOrdered setting as the + ** candidate path. Check to see if the candidate should replace + ** pTo or if the candidate should be skipped */ + if( pTo->rCostrCost==rCost && pTo->nRow<=nOut) ){ +#ifdef WHERETRACE_ENABLED /* 0x4 */ + if( sqlite3WhereTrace&0x4 ){ + sqlite3DebugPrintf( + "Skip %s cost=%-3d,%3d order=%c", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + isOrdered>=0 ? isOrdered+'0' : '?'); + sqlite3DebugPrintf(" vs %s cost=%-3d,%d order=%c\n", + wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, + pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); + } +#endif + /* Discard the candidate path from further consideration */ + testcase( pTo->rCost==rCost ); + continue; + } + testcase( pTo->rCost==rCost+1 ); + /* Control reaches here if the candidate path is better than the + ** pTo path. Replace pTo with the candidate. */ +#ifdef WHERETRACE_ENABLED /* 0x4 */ + if( sqlite3WhereTrace&0x4 ){ + sqlite3DebugPrintf( + "Update %s cost=%-3d,%3d order=%c", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + isOrdered>=0 ? isOrdered+'0' : '?'); + sqlite3DebugPrintf(" was %s cost=%-3d,%3d order=%c\n", + wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, + pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); + } +#endif + } + /* pWLoop is a winner. Add it to the set of best so far */ + pTo->maskLoop = pFrom->maskLoop | pWLoop->maskSelf; + pTo->revLoop = revMask; + pTo->nRow = nOut; + pTo->rCost = rCost; + pTo->rUnsorted = rUnsorted; + pTo->isOrdered = isOrdered; + memcpy(pTo->aLoop, pFrom->aLoop, sizeof(WhereLoop*)*iLoop); + pTo->aLoop[iLoop] = pWLoop; + if( nTo>=mxChoice ){ + mxI = 0; + mxCost = aTo[0].rCost; + mxUnsorted = aTo[0].nRow; + for(jj=1, pTo=&aTo[1]; jjrCost>mxCost + || (pTo->rCost==mxCost && pTo->rUnsorted>mxUnsorted) + ){ + mxCost = pTo->rCost; + mxUnsorted = pTo->rUnsorted; + mxI = jj; + } + } + } + } + } + +#ifdef WHERETRACE_ENABLED /* >=2 */ + if( sqlite3WhereTrace>=2 ){ + sqlite3DebugPrintf("---- after round %d ----\n", iLoop); + for(ii=0, pTo=aTo; iirCost, pTo->nRow, + pTo->isOrdered>=0 ? (pTo->isOrdered+'0') : '?'); + if( pTo->isOrdered>0 ){ + sqlite3DebugPrintf(" rev=0x%llx\n", pTo->revLoop); + }else{ + sqlite3DebugPrintf("\n"); + } + } + } +#endif + + /* Swap the roles of aFrom and aTo for the next generation */ + pFrom = aTo; + aTo = aFrom; + aFrom = pFrom; + nFrom = nTo; } - assert( pLeft->iColumn!=(-1) ); /* Because IPK never has AFF_TEXT */ - pRight = pList->a[0].pExpr; - op = pRight->op; - if( op==TK_REGISTER ){ - op = pRight->op2; + if( nFrom==0 ){ + sqlite3ErrorMsg(pParse, "no query solution"); + sqlite3DbFree(db, pSpace); + return SQLITE_ERROR; } - if( op==TK_VARIABLE ){ - Vdbe *pReprepare = pParse->pReprepare; - int iCol = pRight->iColumn; - pVal = sqlite3VdbeGetValue(pReprepare, iCol, SQLITE_AFF_NONE); - if( pVal && sqlite3_value_type(pVal)==SQLITE_TEXT ){ - z = (char *)sqlite3_value_text(pVal); + + /* Find the lowest cost path. pFrom will be left pointing to that path */ + pFrom = aFrom; + for(ii=1; iirCost>aFrom[ii].rCost ) pFrom = &aFrom[ii]; + } + assert( pWInfo->nLevel==nLoop ); + /* Load the lowest cost path into pWInfo */ + for(iLoop=0; iLoopa + iLoop; + pLevel->pWLoop = pWLoop = pFrom->aLoop[iLoop]; + pLevel->iFrom = pWLoop->iTab; + pLevel->iTabCur = pWInfo->pTabList->a[pLevel->iFrom].iCursor; + } + if( (pWInfo->wctrlFlags & WHERE_WANT_DISTINCT)!=0 + && (pWInfo->wctrlFlags & WHERE_DISTINCTBY)==0 + && pWInfo->eDistinct==WHERE_DISTINCT_NOOP + && nRowEst + ){ + Bitmask notUsed; + int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pResultSet, pFrom, + WHERE_DISTINCTBY, nLoop-1, pFrom->aLoop[nLoop-1], ¬Used); + if( rc==pWInfo->pResultSet->nExpr ){ + pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; } - sqlite3VdbeSetVarmask(pParse->pVdbe, iCol); /* IMP: R-23257-02778 */ - assert( pRight->op==TK_VARIABLE || pRight->op==TK_REGISTER ); - }else if( op==TK_STRING ){ - z = pRight->u.zToken; } - if( z ){ - cnt = 0; - while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){ - cnt++; - } - if( cnt!=0 && 255!=(u8)z[cnt-1] ){ - Expr *pPrefix; - *pisComplete = c==wc[0] && z[cnt+1]==0; - pPrefix = sqlite3Expr(db, TK_STRING, z); - if( pPrefix ) pPrefix->u.zToken[cnt] = 0; - *ppPrefix = pPrefix; - if( op==TK_VARIABLE ){ - Vdbe *v = pParse->pVdbe; - sqlite3VdbeSetVarmask(v, pRight->iColumn); /* IMP: R-23257-02778 */ - if( *pisComplete && pRight->u.zToken[1] ){ - /* If the rhs of the LIKE expression is a variable, and the current - ** value of the variable means there is no need to invoke the LIKE - ** function, then no OP_Variable will be added to the program. - ** This causes problems for the sqlite3_bind_parameter_name() - ** API. To workaround them, add a dummy OP_Variable here. - */ - int r1 = sqlite3GetTempReg(pParse); - sqlite3ExprCodeTarget(pParse, pRight, r1); - sqlite3VdbeChangeP3(v, sqlite3VdbeCurrentAddr(v)-1, 0); - sqlite3ReleaseTempReg(pParse, r1); - } + if( pWInfo->pOrderBy ){ + if( pWInfo->wctrlFlags & WHERE_DISTINCTBY ){ + if( pFrom->isOrdered==pWInfo->pOrderBy->nExpr ){ + pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; } }else{ - z = 0; + pWInfo->nOBSat = pFrom->isOrdered; + if( pWInfo->nOBSat<0 ) pWInfo->nOBSat = 0; + pWInfo->revMask = pFrom->revLoop; + } + if( (pWInfo->wctrlFlags & WHERE_SORTBYGROUP) + && pWInfo->nOBSat==pWInfo->pOrderBy->nExpr + ){ + Bitmask revMask = 0; + int nOrder = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, + pFrom, 0, nLoop-1, pFrom->aLoop[nLoop-1], &revMask + ); + assert( pWInfo->sorted==0 ); + if( nOrder==pWInfo->pOrderBy->nExpr ){ + pWInfo->sorted = 1; + pWInfo->revMask = revMask; + } } } - sqlite3ValueFree(pVal); - return (z!=0); -} -#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ + pWInfo->nRowOut = pFrom->nRow; + + /* Free temporary memory and return success */ + sqlite3DbFree(db, pSpace); + return SQLITE_OK; +} -#ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Check to see if the given expression is of the form -** -** column MATCH expr +** Most queries use only a single table (they are not joins) and have +** simple == constraints against indexed fields. This routine attempts +** to plan those simple cases using much less ceremony than the +** general-purpose query planner, and thereby yield faster sqlite3_prepare() +** times for the common case. ** -** If it is then return TRUE. If not, return FALSE. +** Return non-zero on success, if this query can be handled by this +** no-frills query planner. Return zero if this query needs the +** general-purpose query planner. */ -static int isMatchOfColumn( - Expr *pExpr /* Test this expression */ -){ - ExprList *pList; - - if( pExpr->op!=TK_FUNCTION ){ - return 0; - } - if( sqlite3StrICmp(pExpr->u.zToken,"match")!=0 ){ - return 0; - } - pList = pExpr->x.pList; - if( pList->nExpr!=2 ){ - return 0; +static int whereShortCut(WhereLoopBuilder *pBuilder){ + WhereInfo *pWInfo; + struct SrcList_item *pItem; + WhereClause *pWC; + WhereTerm *pTerm; + WhereLoop *pLoop; + int iCur; + int j; + Table *pTab; + Index *pIdx; + + pWInfo = pBuilder->pWInfo; + if( pWInfo->wctrlFlags & WHERE_FORCE_TABLE ) return 0; + assert( pWInfo->pTabList->nSrc>=1 ); + pItem = pWInfo->pTabList->a; + pTab = pItem->pTab; + if( IsVirtual(pTab) ) return 0; + if( pItem->zIndex ) return 0; + iCur = pItem->iCursor; + pWC = &pWInfo->sWC; + pLoop = pBuilder->pNew; + pLoop->wsFlags = 0; + pLoop->u.btree.nSkip = 0; + pTerm = findTerm(pWC, iCur, -1, 0, WO_EQ, 0); + if( pTerm ){ + pLoop->wsFlags = WHERE_COLUMN_EQ|WHERE_IPK|WHERE_ONEROW; + pLoop->aLTerm[0] = pTerm; + pLoop->nLTerm = 1; + pLoop->u.btree.nEq = 1; + /* TUNING: Cost of a rowid lookup is 10 */ + pLoop->rRun = 33; /* 33==sqlite3LogEst(10) */ + }else{ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + assert( pLoop->aLTermSpace==pLoop->aLTerm ); + assert( ArraySize(pLoop->aLTermSpace)==4 ); + if( !IsUniqueIndex(pIdx) + || pIdx->pPartIdxWhere!=0 + || pIdx->nKeyCol>ArraySize(pLoop->aLTermSpace) + ) continue; + for(j=0; jnKeyCol; j++){ + pTerm = findTerm(pWC, iCur, pIdx->aiColumn[j], 0, WO_EQ, pIdx); + if( pTerm==0 ) break; + pLoop->aLTerm[j] = pTerm; + } + if( j!=pIdx->nKeyCol ) continue; + pLoop->wsFlags = WHERE_COLUMN_EQ|WHERE_ONEROW|WHERE_INDEXED; + if( pIdx->isCovering || (pItem->colUsed & ~columnsInIndex(pIdx))==0 ){ + pLoop->wsFlags |= WHERE_IDX_ONLY; + } + pLoop->nLTerm = j; + pLoop->u.btree.nEq = j; + pLoop->u.btree.pIndex = pIdx; + /* TUNING: Cost of a unique index lookup is 15 */ + pLoop->rRun = 39; /* 39==sqlite3LogEst(15) */ + break; + } } - if( pList->a[1].pExpr->op != TK_COLUMN ){ - return 0; + if( pLoop->wsFlags ){ + pLoop->nOut = (LogEst)1; + pWInfo->a[0].pWLoop = pLoop; + pLoop->maskSelf = getMask(&pWInfo->sMaskSet, iCur); + pWInfo->a[0].iTabCur = iCur; + pWInfo->nRowOut = 1; + if( pWInfo->pOrderBy ) pWInfo->nOBSat = pWInfo->pOrderBy->nExpr; + if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){ + pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; + } +#ifdef SQLITE_DEBUG + pLoop->cId = '0'; +#endif + return 1; } - return 1; -} -#endif /* SQLITE_OMIT_VIRTUALTABLE */ - -/* -** If the pBase expression originated in the ON or USING clause of -** a join, then transfer the appropriate markings over to derived. -*/ -static void transferJoinMarkings(Expr *pDerived, Expr *pBase){ - pDerived->flags |= pBase->flags & EP_FromJoin; - pDerived->iRightJoinTable = pBase->iRightJoinTable; + return 0; } -#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY) /* -** Analyze a term that consists of two or more OR-connected -** subterms. So in: -** -** ... WHERE (a=5) AND (b=7 OR c=9 OR d=13) AND (d=13) -** ^^^^^^^^^^^^^^^^^^^^ -** -** This routine analyzes terms such as the middle term in the above example. -** A WhereOrTerm object is computed and attached to the term under -** analysis, regardless of the outcome of the analysis. Hence: -** -** WhereTerm.wtFlags |= TERM_ORINFO -** WhereTerm.u.pOrInfo = a dynamically allocated WhereOrTerm object -** -** The term being analyzed must have two or more of OR-connected subterms. -** A single subterm might be a set of AND-connected sub-subterms. -** Examples of terms under analysis: -** -** (A) t1.x=t2.y OR t1.x=t2.z OR t1.y=15 OR t1.z=t3.a+5 -** (B) x=expr1 OR expr2=x OR x=expr3 -** (C) t1.x=t2.y OR (t1.x=t2.z AND t1.y=15) -** (D) x=expr1 OR (y>11 AND y<22 AND z LIKE '*hello*') -** (E) (p.a=1 AND q.b=2 AND r.c=3) OR (p.x=4 AND q.y=5 AND r.z=6) +** Generate the beginning of the loop used for WHERE clause processing. +** The return value is a pointer to an opaque structure that contains +** information needed to terminate the loop. Later, the calling routine +** should invoke sqlite3WhereEnd() with the return value of this function +** in order to complete the WHERE clause processing. ** -** CASE 1: +** If an error occurs, this routine returns NULL. ** -** If all subterms are of the form T.C=expr for some single column of C -** a single table T (as shown in example B above) then create a new virtual -** term that is an equivalent IN expression. In other words, if the term -** being analyzed is: +** The basic idea is to do a nested loop, one loop for each table in +** the FROM clause of a select. (INSERT and UPDATE statements are the +** same as a SELECT with only a single table in the FROM clause.) For +** example, if the SQL is this: ** -** x = expr1 OR expr2 = x OR x = expr3 +** SELECT * FROM t1, t2, t3 WHERE ...; ** -** then create a new virtual term like this: +** Then the code generated is conceptually like the following: ** -** x IN (expr1,expr2,expr3) +** foreach row1 in t1 do \ Code generated +** foreach row2 in t2 do |-- by sqlite3WhereBegin() +** foreach row3 in t3 do / +** ... +** end \ Code generated +** end |-- by sqlite3WhereEnd() +** end / ** -** CASE 2: +** Note that the loops might not be nested in the order in which they +** appear in the FROM clause if a different order is better able to make +** use of indices. Note also that when the IN operator appears in +** the WHERE clause, it might result in additional nested loops for +** scanning through all values on the right-hand side of the IN. ** -** If all subterms are indexable by a single table T, then set +** There are Btree cursors associated with each table. t1 uses cursor +** number pTabList->a[0].iCursor. t2 uses the cursor pTabList->a[1].iCursor. +** And so forth. This routine generates code to open those VDBE cursors +** and sqlite3WhereEnd() generates the code to close them. ** -** WhereTerm.eOperator = WO_OR -** WhereTerm.u.pOrInfo->indexable |= the cursor number for table T +** The code that sqlite3WhereBegin() generates leaves the cursors named +** in pTabList pointing at their appropriate entries. The [...] code +** can use OP_Column and OP_Rowid opcodes on these cursors to extract +** data from the various tables of the loop. ** -** A subterm is "indexable" if it is of the form -** "T.C " where C is any column of table T and -** is one of "=", "<", "<=", ">", ">=", "IS NULL", or "IN". -** A subterm is also indexable if it is an AND of two or more -** subsubterms at least one of which is indexable. Indexable AND -** subterms have their eOperator set to WO_AND and they have -** u.pAndInfo set to a dynamically allocated WhereAndTerm object. +** If the WHERE clause is empty, the foreach loops must each scan their +** entire tables. Thus a three-way join is an O(N^3) operation. But if +** the tables have indices and there are terms in the WHERE clause that +** refer to those indices, a complete table scan can be avoided and the +** code will run much faster. Most of the work of this routine is checking +** to see if there are indices that can be used to speed up the loop. ** -** From another point of view, "indexable" means that the subterm could -** potentially be used with an index if an appropriate index exists. -** This analysis does not consider whether or not the index exists; that -** is something the bestIndex() routine will determine. This analysis -** only looks at whether subterms appropriate for indexing exist. +** Terms of the WHERE clause are also used to limit which rows actually +** make it to the "..." in the middle of the loop. After each "foreach", +** terms of the WHERE clause that use only terms in that loop and outer +** loops are evaluated and if false a jump is made around all subsequent +** inner loops (or around the "..." if the test occurs within the inner- +** most loop) ** -** All examples A through E above all satisfy case 2. But if a term -** also statisfies case 1 (such as B) we know that the optimizer will -** always prefer case 1, so in that case we pretend that case 2 is not -** satisfied. +** OUTER JOINS ** -** It might be the case that multiple tables are indexable. For example, -** (E) above is indexable on tables P, Q, and R. +** An outer join of tables t1 and t2 is conceptally coded as follows: ** -** Terms that satisfy case 2 are candidates for lookup by using -** separate indices to find rowids for each subterm and composing -** the union of all rowids using a RowSet object. This is similar -** to "bitmap indices" in other database engines. +** foreach row1 in t1 do +** flag = 0 +** foreach row2 in t2 do +** start: +** ... +** flag = 1 +** end +** if flag==0 then +** move the row2 cursor to a null row +** goto start +** fi +** end ** -** OTHERWISE: +** ORDER BY CLAUSE PROCESSING ** -** If neither case 1 nor case 2 apply, then leave the eOperator set to -** zero. This term is not useful for search. +** pOrderBy is a pointer to the ORDER BY clause (or the GROUP BY clause +** if the WHERE_GROUPBY flag is set in wctrlFlags) of a SELECT statement +** if there is one. If there is no ORDER BY clause or if this routine +** is called from an UPDATE or DELETE statement, then pOrderBy is NULL. +** +** The iIdxCur parameter is the cursor number of an index. If +** WHERE_ONETABLE_ONLY is set, iIdxCur is the cursor number of an index +** to use for OR clause processing. The WHERE clause should use this +** specific cursor. If WHERE_ONEPASS_DESIRED is set, then iIdxCur is +** the first cursor in an array of cursors for all indices. iIdxCur should +** be used to compute the appropriate cursor depending on which index is +** used. */ -static void exprAnalyzeOrTerm( - SrcList *pSrc, /* the FROM clause */ - WhereClause *pWC, /* the complete WHERE clause */ - int idxTerm /* Index of the OR-term to be analyzed */ +SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( + Parse *pParse, /* The parser context */ + SrcList *pTabList, /* FROM clause: A list of all tables to be scanned */ + Expr *pWhere, /* The WHERE clause */ + ExprList *pOrderBy, /* An ORDER BY (or GROUP BY) clause, or NULL */ + ExprList *pResultSet, /* Result set of the query */ + u16 wctrlFlags, /* One of the WHERE_* flags defined in sqliteInt.h */ + int iIdxCur /* If WHERE_ONETABLE_ONLY is set, index cursor number */ ){ - Parse *pParse = pWC->pParse; /* Parser context */ - sqlite3 *db = pParse->db; /* Database connection */ - WhereTerm *pTerm = &pWC->a[idxTerm]; /* The term to be analyzed */ - Expr *pExpr = pTerm->pExpr; /* The expression of the term */ - WhereMaskSet *pMaskSet = pWC->pMaskSet; /* Table use masks */ - int i; /* Loop counters */ - WhereClause *pOrWc; /* Breakup of pTerm into subterms */ - WhereTerm *pOrTerm; /* A Sub-term within the pOrWc */ - WhereOrInfo *pOrInfo; /* Additional information associated with pTerm */ - Bitmask chngToIN; /* Tables that might satisfy case 1 */ - Bitmask indexable; /* Tables that are indexable, satisfying case 2 */ - - /* - ** Break the OR clause into its separate subterms. The subterms are - ** stored in a WhereClause structure containing within the WhereOrInfo - ** object that is attached to the original OR clause term. - */ - assert( (pTerm->wtFlags & (TERM_DYNAMIC|TERM_ORINFO|TERM_ANDINFO))==0 ); - assert( pExpr->op==TK_OR ); - pTerm->u.pOrInfo = pOrInfo = sqlite3DbMallocZero(db, sizeof(*pOrInfo)); - if( pOrInfo==0 ) return; - pTerm->wtFlags |= TERM_ORINFO; - pOrWc = &pOrInfo->wc; - whereClauseInit(pOrWc, pWC->pParse, pMaskSet); - whereSplit(pOrWc, pExpr, TK_OR); - exprAnalyzeAll(pSrc, pOrWc); - if( db->mallocFailed ) return; - assert( pOrWc->nTerm>=2 ); - - /* - ** Compute the set of tables that might satisfy cases 1 or 2. - */ - indexable = ~(Bitmask)0; - chngToIN = ~(pWC->vmask); - for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0 && indexable; i--, pOrTerm++){ - if( (pOrTerm->eOperator & WO_SINGLE)==0 ){ - WhereAndInfo *pAndInfo; - assert( pOrTerm->eOperator==0 ); - assert( (pOrTerm->wtFlags & (TERM_ANDINFO|TERM_ORINFO))==0 ); - chngToIN = 0; - pAndInfo = sqlite3DbMallocRaw(db, sizeof(*pAndInfo)); - if( pAndInfo ){ - WhereClause *pAndWC; - WhereTerm *pAndTerm; - int j; - Bitmask b = 0; - pOrTerm->u.pAndInfo = pAndInfo; - pOrTerm->wtFlags |= TERM_ANDINFO; - pOrTerm->eOperator = WO_AND; - pAndWC = &pAndInfo->wc; - whereClauseInit(pAndWC, pWC->pParse, pMaskSet); - whereSplit(pAndWC, pOrTerm->pExpr, TK_AND); - exprAnalyzeAll(pSrc, pAndWC); - testcase( db->mallocFailed ); - if( !db->mallocFailed ){ - for(j=0, pAndTerm=pAndWC->a; jnTerm; j++, pAndTerm++){ - assert( pAndTerm->pExpr ); - if( allowedOp(pAndTerm->pExpr->op) ){ - b |= getMask(pMaskSet, pAndTerm->leftCursor); - } - } - } - indexable &= b; - } - }else if( pOrTerm->wtFlags & TERM_COPIED ){ - /* Skip this term for now. We revisit it when we process the - ** corresponding TERM_VIRTUAL term */ - }else{ - Bitmask b; - b = getMask(pMaskSet, pOrTerm->leftCursor); - if( pOrTerm->wtFlags & TERM_VIRTUAL ){ - WhereTerm *pOther = &pOrWc->a[pOrTerm->iParent]; - b |= getMask(pMaskSet, pOther->leftCursor); - } - indexable &= b; - if( pOrTerm->eOperator!=WO_EQ ){ - chngToIN = 0; - }else{ - chngToIN &= b; - } - } - } - - /* - ** Record the set of tables that satisfy case 2. The set might be - ** empty. - */ - pOrInfo->indexable = indexable; - pTerm->eOperator = indexable==0 ? 0 : WO_OR; - - /* - ** chngToIN holds a set of tables that *might* satisfy case 1. But - ** we have to do some additional checking to see if case 1 really - ** is satisfied. - ** - ** chngToIN will hold either 0, 1, or 2 bits. The 0-bit case means - ** that there is no possibility of transforming the OR clause into an - ** IN operator because one or more terms in the OR clause contain - ** something other than == on a column in the single table. The 1-bit - ** case means that every term of the OR clause is of the form - ** "table.column=expr" for some single table. The one bit that is set - ** will correspond to the common table. We still need to check to make - ** sure the same column is used on all terms. The 2-bit case is when - ** the all terms are of the form "table1.column=table2.column". It - ** might be possible to form an IN operator with either table1.column - ** or table2.column as the LHS if either is common to every term of - ** the OR clause. - ** - ** Note that terms of the form "table.column1=table.column2" (the - ** same table on both sizes of the ==) cannot be optimized. - */ - if( chngToIN ){ - int okToChngToIN = 0; /* True if the conversion to IN is valid */ - int iColumn = -1; /* Column index on lhs of IN operator */ - int iCursor = -1; /* Table cursor common to all terms */ - int j = 0; /* Loop counter */ - - /* Search for a table and column that appears on one side or the - ** other of the == operator in every subterm. That table and column - ** will be recorded in iCursor and iColumn. There might not be any - ** such table and column. Set okToChngToIN if an appropriate table - ** and column is found but leave okToChngToIN false if not found. - */ - for(j=0; j<2 && !okToChngToIN; j++){ - pOrTerm = pOrWc->a; - for(i=pOrWc->nTerm-1; i>=0; i--, pOrTerm++){ - assert( pOrTerm->eOperator==WO_EQ ); - pOrTerm->wtFlags &= ~TERM_OR_OK; - if( pOrTerm->leftCursor==iCursor ){ - /* This is the 2-bit case and we are on the second iteration and - ** current term is from the first iteration. So skip this term. */ - assert( j==1 ); - continue; - } - if( (chngToIN & getMask(pMaskSet, pOrTerm->leftCursor))==0 ){ - /* This term must be of the form t1.a==t2.b where t2 is in the - ** chngToIN set but t1 is not. This term will be either preceeded - ** or follwed by an inverted copy (t2.b==t1.a). Skip this term - ** and use its inversion. */ - testcase( pOrTerm->wtFlags & TERM_COPIED ); - testcase( pOrTerm->wtFlags & TERM_VIRTUAL ); - assert( pOrTerm->wtFlags & (TERM_COPIED|TERM_VIRTUAL) ); - continue; - } - iColumn = pOrTerm->u.leftColumn; - iCursor = pOrTerm->leftCursor; - break; - } - if( i<0 ){ - /* No candidate table+column was found. This can only occur - ** on the second iteration */ - assert( j==1 ); - assert( (chngToIN&(chngToIN-1))==0 ); - assert( chngToIN==getMask(pMaskSet, iCursor) ); - break; - } - testcase( j==1 ); - - /* We have found a candidate table and column. Check to see if that - ** table and column is common to every term in the OR clause */ - okToChngToIN = 1; - for(; i>=0 && okToChngToIN; i--, pOrTerm++){ - assert( pOrTerm->eOperator==WO_EQ ); - if( pOrTerm->leftCursor!=iCursor ){ - pOrTerm->wtFlags &= ~TERM_OR_OK; - }else if( pOrTerm->u.leftColumn!=iColumn ){ - okToChngToIN = 0; - }else{ - int affLeft, affRight; - /* If the right-hand side is also a column, then the affinities - ** of both right and left sides must be such that no type - ** conversions are required on the right. (Ticket #2249) - */ - affRight = sqlite3ExprAffinity(pOrTerm->pExpr->pRight); - affLeft = sqlite3ExprAffinity(pOrTerm->pExpr->pLeft); - if( affRight!=0 && affRight!=affLeft ){ - okToChngToIN = 0; - }else{ - pOrTerm->wtFlags |= TERM_OR_OK; - } - } - } - } + int nByteWInfo; /* Num. bytes allocated for WhereInfo struct */ + int nTabList; /* Number of elements in pTabList */ + WhereInfo *pWInfo; /* Will become the return value of this function */ + Vdbe *v = pParse->pVdbe; /* The virtual database engine */ + Bitmask notReady; /* Cursors that are not yet positioned */ + WhereLoopBuilder sWLB; /* The WhereLoop builder */ + WhereMaskSet *pMaskSet; /* The expression mask set */ + WhereLevel *pLevel; /* A single level in pWInfo->a[] */ + WhereLoop *pLoop; /* Pointer to a single WhereLoop object */ + int ii; /* Loop counter */ + sqlite3 *db; /* Database connection */ + int rc; /* Return code */ - /* At this point, okToChngToIN is true if original pTerm satisfies - ** case 1. In that case, construct a new virtual term that is - ** pTerm converted into an IN operator. - ** - ** EV: R-00211-15100 - */ - if( okToChngToIN ){ - Expr *pDup; /* A transient duplicate expression */ - ExprList *pList = 0; /* The RHS of the IN operator */ - Expr *pLeft = 0; /* The LHS of the IN operator */ - Expr *pNew; /* The complete IN operator */ - for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0; i--, pOrTerm++){ - if( (pOrTerm->wtFlags & TERM_OR_OK)==0 ) continue; - assert( pOrTerm->eOperator==WO_EQ ); - assert( pOrTerm->leftCursor==iCursor ); - assert( pOrTerm->u.leftColumn==iColumn ); - pDup = sqlite3ExprDup(db, pOrTerm->pExpr->pRight, 0); - pList = sqlite3ExprListAppend(pWC->pParse, pList, pDup); - pLeft = pOrTerm->pExpr->pLeft; - } - assert( pLeft!=0 ); - pDup = sqlite3ExprDup(db, pLeft, 0); - pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0, 0); - if( pNew ){ - int idxNew; - transferJoinMarkings(pNew, pExpr); - assert( !ExprHasProperty(pNew, EP_xIsSelect) ); - pNew->x.pList = pList; - idxNew = whereClauseInsert(pWC, pNew, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew==0 ); - exprAnalyze(pSrc, pWC, idxNew); - pTerm = &pWC->a[idxTerm]; - pWC->a[idxNew].iParent = idxTerm; - pTerm->nChild = 1; - }else{ - sqlite3ExprListDelete(db, pList); - } - pTerm->eOperator = WO_NOOP; /* case 1 trumps case 2 */ - } + /* Variable initialization */ + db = pParse->db; + memset(&sWLB, 0, sizeof(sWLB)); + + /* An ORDER/GROUP BY clause of more than 63 terms cannot be optimized */ + testcase( pOrderBy && pOrderBy->nExpr==BMS-1 ); + if( pOrderBy && pOrderBy->nExpr>=BMS ) pOrderBy = 0; + sWLB.pOrderBy = pOrderBy; + + /* Disable the DISTINCT optimization if SQLITE_DistinctOpt is set via + ** sqlite3_test_ctrl(SQLITE_TESTCTRL_OPTIMIZATIONS,...) */ + if( OptimizationDisabled(db, SQLITE_DistinctOpt) ){ + wctrlFlags &= ~WHERE_WANT_DISTINCT; } -} -#endif /* !SQLITE_OMIT_OR_OPTIMIZATION && !SQLITE_OMIT_SUBQUERY */ + /* The number of tables in the FROM clause is limited by the number of + ** bits in a Bitmask + */ + testcase( pTabList->nSrc==BMS ); + if( pTabList->nSrc>BMS ){ + sqlite3ErrorMsg(pParse, "at most %d tables in a join", BMS); + return 0; + } -/* -** The input to this routine is an WhereTerm structure with only the -** "pExpr" field filled in. The job of this routine is to analyze the -** subexpression and populate all the other fields of the WhereTerm -** structure. -** -** If the expression is of the form " X" it gets commuted -** to the standard form of "X ". -** -** If the expression is of the form "X Y" where both X and Y are -** columns, then the original expression is unchanged and a new virtual -** term of the form "Y X" is added to the WHERE clause and -** analyzed separately. The original term is marked with TERM_COPIED -** and the new term is marked with TERM_DYNAMIC (because it's pExpr -** needs to be freed with the WhereClause) and TERM_VIRTUAL (because it -** is a commuted copy of a prior term.) The original term has nChild=1 -** and the copy has idxParent set to the index of the original term. -*/ -static void exprAnalyze( - SrcList *pSrc, /* the FROM clause */ - WhereClause *pWC, /* the WHERE clause */ - int idxTerm /* Index of the term to be analyzed */ -){ - WhereTerm *pTerm; /* The term to be analyzed */ - WhereMaskSet *pMaskSet; /* Set of table index masks */ - Expr *pExpr; /* The expression to be analyzed */ - Bitmask prereqLeft; /* Prerequesites of the pExpr->pLeft */ - Bitmask prereqAll; /* Prerequesites of pExpr */ - Bitmask extraRight = 0; /* Extra dependencies on LEFT JOIN */ - Expr *pStr1 = 0; /* RHS of LIKE/GLOB operator */ - int isComplete = 0; /* RHS of LIKE/GLOB ends with wildcard */ - int noCase = 0; /* LIKE/GLOB distinguishes case */ - int op; /* Top-level operator. pExpr->op */ - Parse *pParse = pWC->pParse; /* Parsing context */ - sqlite3 *db = pParse->db; /* Database connection */ + /* This function normally generates a nested loop for all tables in + ** pTabList. But if the WHERE_ONETABLE_ONLY flag is set, then we should + ** only generate code for the first table in pTabList and assume that + ** any cursors associated with subsequent tables are uninitialized. + */ + nTabList = (wctrlFlags & WHERE_ONETABLE_ONLY) ? 1 : pTabList->nSrc; + /* Allocate and initialize the WhereInfo structure that will become the + ** return value. A single allocation is used to store the WhereInfo + ** struct, the contents of WhereInfo.a[], the WhereClause structure + ** and the WhereMaskSet structure. Since WhereClause contains an 8-byte + ** field (type Bitmask) it must be aligned on an 8-byte boundary on + ** some architectures. Hence the ROUND8() below. + */ + nByteWInfo = ROUND8(sizeof(WhereInfo)+(nTabList-1)*sizeof(WhereLevel)); + pWInfo = sqlite3DbMallocZero(db, nByteWInfo + sizeof(WhereLoop)); if( db->mallocFailed ){ - return; + sqlite3DbFree(db, pWInfo); + pWInfo = 0; + goto whereBeginError; } - pTerm = &pWC->a[idxTerm]; - pMaskSet = pWC->pMaskSet; - pExpr = pTerm->pExpr; - prereqLeft = exprTableUsage(pMaskSet, pExpr->pLeft); - op = pExpr->op; - if( op==TK_IN ){ - assert( pExpr->pRight==0 ); - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - pTerm->prereqRight = exprSelectTableUsage(pMaskSet, pExpr->x.pSelect); - }else{ - pTerm->prereqRight = exprListTableUsage(pMaskSet, pExpr->x.pList); + pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1; + pWInfo->nLevel = nTabList; + pWInfo->pParse = pParse; + pWInfo->pTabList = pTabList; + pWInfo->pOrderBy = pOrderBy; + pWInfo->pResultSet = pResultSet; + pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v); + pWInfo->wctrlFlags = wctrlFlags; + pWInfo->savedNQueryLoop = pParse->nQueryLoop; + pMaskSet = &pWInfo->sMaskSet; + sWLB.pWInfo = pWInfo; + sWLB.pWC = &pWInfo->sWC; + sWLB.pNew = (WhereLoop*)(((char*)pWInfo)+nByteWInfo); + assert( EIGHT_BYTE_ALIGNMENT(sWLB.pNew) ); + whereLoopInit(sWLB.pNew); +#ifdef SQLITE_DEBUG + sWLB.pNew->cId = '*'; +#endif + + /* Split the WHERE clause into separate subexpressions where each + ** subexpression is separated by an AND operator. + */ + initMaskSet(pMaskSet); + whereClauseInit(&pWInfo->sWC, pWInfo); + whereSplit(&pWInfo->sWC, pWhere, TK_AND); + + /* Special case: a WHERE clause that is constant. Evaluate the + ** expression and either jump over all of the code or fall thru. + */ + for(ii=0; iinTerm; ii++){ + if( nTabList==0 || sqlite3ExprIsConstantNotJoin(sWLB.pWC->a[ii].pExpr) ){ + sqlite3ExprIfFalse(pParse, sWLB.pWC->a[ii].pExpr, pWInfo->iBreak, + SQLITE_JUMPIFNULL); + sWLB.pWC->a[ii].wtFlags |= TERM_CODED; } - }else if( op==TK_ISNULL ){ - pTerm->prereqRight = 0; - }else{ - pTerm->prereqRight = exprTableUsage(pMaskSet, pExpr->pRight); - } - prereqAll = exprTableUsage(pMaskSet, pExpr); - if( ExprHasProperty(pExpr, EP_FromJoin) ){ - Bitmask x = getMask(pMaskSet, pExpr->iRightJoinTable); - prereqAll |= x; - extraRight = x-1; /* ON clause terms may not be used with an index - ** on left table of a LEFT JOIN. Ticket #3015 */ } - pTerm->prereqAll = prereqAll; - pTerm->leftCursor = -1; - pTerm->iParent = -1; - pTerm->eOperator = 0; - if( allowedOp(op) && (pTerm->prereqRight & prereqLeft)==0 ){ - Expr *pLeft = pExpr->pLeft; - Expr *pRight = pExpr->pRight; - if( pLeft->op==TK_COLUMN ){ - pTerm->leftCursor = pLeft->iTable; - pTerm->u.leftColumn = pLeft->iColumn; - pTerm->eOperator = operatorMask(op); - } - if( pRight && pRight->op==TK_COLUMN ){ - WhereTerm *pNew; - Expr *pDup; - if( pTerm->leftCursor>=0 ){ - int idxNew; - pDup = sqlite3ExprDup(db, pExpr, 0); - if( db->mallocFailed ){ - sqlite3ExprDelete(db, pDup); - return; - } - idxNew = whereClauseInsert(pWC, pDup, TERM_VIRTUAL|TERM_DYNAMIC); - if( idxNew==0 ) return; - pNew = &pWC->a[idxNew]; - pNew->iParent = idxTerm; - pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; - pTerm->wtFlags |= TERM_COPIED; - }else{ - pDup = pExpr; - pNew = pTerm; - } - exprCommute(pParse, pDup); - pLeft = pDup->pLeft; - pNew->leftCursor = pLeft->iTable; - pNew->u.leftColumn = pLeft->iColumn; - testcase( (prereqLeft | extraRight) != prereqLeft ); - pNew->prereqRight = prereqLeft | extraRight; - pNew->prereqAll = prereqAll; - pNew->eOperator = operatorMask(pDup->op); + + /* Special case: No FROM clause + */ + if( nTabList==0 ){ + if( pOrderBy ) pWInfo->nOBSat = pOrderBy->nExpr; + if( wctrlFlags & WHERE_WANT_DISTINCT ){ + pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; } } -#ifndef SQLITE_OMIT_BETWEEN_OPTIMIZATION - /* If a term is the BETWEEN operator, create two new virtual terms - ** that define the range that the BETWEEN implements. For example: - ** - ** a BETWEEN b AND c - ** - ** is converted into: + /* Assign a bit from the bitmask to every term in the FROM clause. ** - ** (a BETWEEN b AND c) AND (a>=b) AND (a<=c) + ** When assigning bitmask values to FROM clause cursors, it must be + ** the case that if X is the bitmask for the N-th FROM clause term then + ** the bitmask for all FROM clause terms to the left of the N-th term + ** is (X-1). An expression from the ON clause of a LEFT JOIN can use + ** its Expr.iRightJoinTable value to find the bitmask of the right table + ** of the join. Subtracting one from the right table bitmask gives a + ** bitmask for all tables to the left of the join. Knowing the bitmask + ** for all tables to the left of a left join is important. Ticket #3015. ** - ** The two new terms are added onto the end of the WhereClause object. - ** The new terms are "dynamic" and are children of the original BETWEEN - ** term. That means that if the BETWEEN term is coded, the children are - ** skipped. Or, if the children are satisfied by an index, the original - ** BETWEEN term is skipped. + ** Note that bitmasks are created for all pTabList->nSrc tables in + ** pTabList, not just the first nTabList tables. nTabList is normally + ** equal to pTabList->nSrc but might be shortened to 1 if the + ** WHERE_ONETABLE_ONLY flag is set. */ - else if( pExpr->op==TK_BETWEEN && pWC->op==TK_AND ){ - ExprList *pList = pExpr->x.pList; - int i; - static const u8 ops[] = {TK_GE, TK_LE}; - assert( pList!=0 ); - assert( pList->nExpr==2 ); - for(i=0; i<2; i++){ - Expr *pNewExpr; - int idxNew; - pNewExpr = sqlite3PExpr(pParse, ops[i], - sqlite3ExprDup(db, pExpr->pLeft, 0), - sqlite3ExprDup(db, pList->a[i].pExpr, 0), 0); - idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew==0 ); - exprAnalyze(pSrc, pWC, idxNew); - pTerm = &pWC->a[idxTerm]; - pWC->a[idxNew].iParent = idxTerm; + for(ii=0; iinSrc; ii++){ + createMask(pMaskSet, pTabList->a[ii].iCursor); + } +#ifndef NDEBUG + { + Bitmask toTheLeft = 0; + for(ii=0; iinSrc; ii++){ + Bitmask m = getMask(pMaskSet, pTabList->a[ii].iCursor); + assert( (m-1)==toTheLeft ); + toTheLeft |= m; } - pTerm->nChild = 2; } -#endif /* SQLITE_OMIT_BETWEEN_OPTIMIZATION */ +#endif -#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY) - /* Analyze a term that is composed of two or more subterms connected by - ** an OR operator. + /* Analyze all of the subexpressions. Note that exprAnalyze() might + ** add new virtual terms onto the end of the WHERE clause. We do not + ** want to analyze these virtual terms, so start analyzing at the end + ** and work forward so that the added virtual terms are never processed. */ - else if( pExpr->op==TK_OR ){ - assert( pWC->op==TK_AND ); - exprAnalyzeOrTerm(pSrc, pWC, idxTerm); - pTerm = &pWC->a[idxTerm]; + exprAnalyzeAll(pTabList, &pWInfo->sWC); + if( db->mallocFailed ){ + goto whereBeginError; } -#endif /* SQLITE_OMIT_OR_OPTIMIZATION */ - -#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION - /* Add constraints to reduce the search space on a LIKE or GLOB - ** operator. - ** - ** A like pattern of the form "x LIKE 'abc%'" is changed into constraints - ** - ** x>='abc' AND x<'abd' AND x LIKE 'abc%' - ** - ** The last character of the prefix "abc" is incremented to form the - ** termination condition "abd". - */ - if( pWC->op==TK_AND - && isLikeOrGlob(pParse, pExpr, &pStr1, &isComplete, &noCase) - ){ - Expr *pLeft; /* LHS of LIKE/GLOB operator */ - Expr *pStr2; /* Copy of pStr1 - RHS of LIKE/GLOB operator */ - Expr *pNewExpr1; - Expr *pNewExpr2; - int idxNew1; - int idxNew2; - CollSeq *pColl; /* Collating sequence to use */ - pLeft = pExpr->x.pList->a[1].pExpr; - pStr2 = sqlite3ExprDup(db, pStr1, 0); - if( !db->mallocFailed ){ - u8 c, *pC; /* Last character before the first wildcard */ - pC = (u8*)&pStr2->u.zToken[sqlite3Strlen30(pStr2->u.zToken)-1]; - c = *pC; - if( noCase ){ - /* The point is to increment the last character before the first - ** wildcard. But if we increment '@', that will push it into the - ** alphabetic range where case conversions will mess up the - ** inequality. To avoid this, make sure to also run the full - ** LIKE on all candidate expressions by clearing the isComplete flag - */ - if( c=='A'-1 ) isComplete = 0; /* EV: R-64339-08207 */ + if( wctrlFlags & WHERE_WANT_DISTINCT ){ + if( isDistinctRedundant(pParse, pTabList, &pWInfo->sWC, pResultSet) ){ + /* The DISTINCT marking is pointless. Ignore it. */ + pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; + }else if( pOrderBy==0 ){ + /* Try to ORDER BY the result set to make distinct processing easier */ + pWInfo->wctrlFlags |= WHERE_DISTINCTBY; + pWInfo->pOrderBy = pResultSet; + } + } + /* Construct the WhereLoop objects */ + WHERETRACE(0xffff,("*** Optimizer Start ***\n")); +#if defined(WHERETRACE_ENABLED) + /* Display all terms of the WHERE clause */ + if( sqlite3WhereTrace & 0x100 ){ + int i; + for(i=0; inTerm; i++){ + whereTermPrint(&sWLB.pWC->a[i], i); + } + } +#endif - c = sqlite3UpperToLower[c]; + if( nTabList!=1 || whereShortCut(&sWLB)==0 ){ + rc = whereLoopAddAll(&sWLB); + if( rc ) goto whereBeginError; + + /* Display all of the WhereLoop objects if wheretrace is enabled */ +#ifdef WHERETRACE_ENABLED /* !=0 */ + if( sqlite3WhereTrace ){ + WhereLoop *p; + int i; + static char zLabel[] = "0123456789abcdefghijklmnopqrstuvwyxz" + "ABCDEFGHIJKLMNOPQRSTUVWYXZ"; + for(p=pWInfo->pLoops, i=0; p; p=p->pNextLoop, i++){ + p->cId = zLabel[i%sizeof(zLabel)]; + whereLoopPrint(p, sWLB.pWC); } - *pC = c + 1; } - pColl = sqlite3FindCollSeq(db, SQLITE_UTF8, noCase ? "NOCASE" : "BINARY",0); - pNewExpr1 = sqlite3PExpr(pParse, TK_GE, - sqlite3ExprSetColl(sqlite3ExprDup(db,pLeft,0), pColl), - pStr1, 0); - idxNew1 = whereClauseInsert(pWC, pNewExpr1, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew1==0 ); - exprAnalyze(pSrc, pWC, idxNew1); - pNewExpr2 = sqlite3PExpr(pParse, TK_LT, - sqlite3ExprSetColl(sqlite3ExprDup(db,pLeft,0), pColl), - pStr2, 0); - idxNew2 = whereClauseInsert(pWC, pNewExpr2, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew2==0 ); - exprAnalyze(pSrc, pWC, idxNew2); - pTerm = &pWC->a[idxTerm]; - if( isComplete ){ - pWC->a[idxNew1].iParent = idxTerm; - pWC->a[idxNew2].iParent = idxTerm; - pTerm->nChild = 2; +#endif + + wherePathSolver(pWInfo, 0); + if( db->mallocFailed ) goto whereBeginError; + if( pWInfo->pOrderBy ){ + wherePathSolver(pWInfo, pWInfo->nRowOut+1); + if( db->mallocFailed ) goto whereBeginError; } } -#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ + if( pWInfo->pOrderBy==0 && (db->flags & SQLITE_ReverseOrder)!=0 ){ + pWInfo->revMask = (Bitmask)(-1); + } + if( pParse->nErr || NEVER(db->mallocFailed) ){ + goto whereBeginError; + } +#ifdef WHERETRACE_ENABLED /* !=0 */ + if( sqlite3WhereTrace ){ + int ii; + sqlite3DebugPrintf("---- Solution nRow=%d", pWInfo->nRowOut); + if( pWInfo->nOBSat>0 ){ + sqlite3DebugPrintf(" ORDERBY=%d,0x%llx", pWInfo->nOBSat, pWInfo->revMask); + } + switch( pWInfo->eDistinct ){ + case WHERE_DISTINCT_UNIQUE: { + sqlite3DebugPrintf(" DISTINCT=unique"); + break; + } + case WHERE_DISTINCT_ORDERED: { + sqlite3DebugPrintf(" DISTINCT=ordered"); + break; + } + case WHERE_DISTINCT_UNORDERED: { + sqlite3DebugPrintf(" DISTINCT=unordered"); + break; + } + } + sqlite3DebugPrintf("\n"); + for(ii=0; iinLevel; ii++){ + whereLoopPrint(pWInfo->a[ii].pWLoop, sWLB.pWC); + } + } +#endif + /* Attempt to omit tables from the join that do not effect the result */ + if( pWInfo->nLevel>=2 + && pResultSet!=0 + && OptimizationEnabled(db, SQLITE_OmitNoopJoin) + ){ + Bitmask tabUsed = exprListTableUsage(pMaskSet, pResultSet); + if( sWLB.pOrderBy ) tabUsed |= exprListTableUsage(pMaskSet, sWLB.pOrderBy); + while( pWInfo->nLevel>=2 ){ + WhereTerm *pTerm, *pEnd; + pLoop = pWInfo->a[pWInfo->nLevel-1].pWLoop; + if( (pWInfo->pTabList->a[pLoop->iTab].jointype & JT_LEFT)==0 ) break; + if( (wctrlFlags & WHERE_WANT_DISTINCT)==0 + && (pLoop->wsFlags & WHERE_ONEROW)==0 + ){ + break; + } + if( (tabUsed & pLoop->maskSelf)!=0 ) break; + pEnd = sWLB.pWC->a + sWLB.pWC->nTerm; + for(pTerm=sWLB.pWC->a; pTermprereqAll & pLoop->maskSelf)!=0 + && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) + ){ + break; + } + } + if( pTerm drop loop %c not used\n", pLoop->cId)); + pWInfo->nLevel--; + nTabList--; + } + } + WHERETRACE(0xffff,("*** Optimizer Finished ***\n")); + pWInfo->pParse->nQueryLoop += pWInfo->nRowOut; -#ifndef SQLITE_OMIT_VIRTUALTABLE - /* Add a WO_MATCH auxiliary term to the constraint set if the - ** current expression is of the form: column MATCH expr. - ** This information is used by the xBestIndex methods of - ** virtual tables. The native query optimizer does not attempt - ** to do anything with MATCH functions. + /* If the caller is an UPDATE or DELETE statement that is requesting + ** to use a one-pass algorithm, determine if this is appropriate. + ** The one-pass algorithm only works if the WHERE clause constrains + ** the statement to update a single row. */ - if( isMatchOfColumn(pExpr) ){ - int idxNew; - Expr *pRight, *pLeft; - WhereTerm *pNewTerm; - Bitmask prereqColumn, prereqExpr; - - pRight = pExpr->x.pList->a[0].pExpr; - pLeft = pExpr->x.pList->a[1].pExpr; - prereqExpr = exprTableUsage(pMaskSet, pRight); - prereqColumn = exprTableUsage(pMaskSet, pLeft); - if( (prereqExpr & prereqColumn)==0 ){ - Expr *pNewExpr; - pNewExpr = sqlite3PExpr(pParse, TK_MATCH, - 0, sqlite3ExprDup(db, pRight, 0), 0); - idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew==0 ); - pNewTerm = &pWC->a[idxNew]; - pNewTerm->prereqRight = prereqExpr; - pNewTerm->leftCursor = pLeft->iTable; - pNewTerm->u.leftColumn = pLeft->iColumn; - pNewTerm->eOperator = WO_MATCH; - pNewTerm->iParent = idxTerm; - pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; - pTerm->wtFlags |= TERM_COPIED; - pNewTerm->prereqAll = pTerm->prereqAll; + assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 ); + if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 + && (pWInfo->a[0].pWLoop->wsFlags & WHERE_ONEROW)!=0 ){ + pWInfo->okOnePass = 1; + if( HasRowid(pTabList->a[0].pTab) ){ + pWInfo->a[0].pWLoop->wsFlags &= ~WHERE_IDX_ONLY; } } -#endif /* SQLITE_OMIT_VIRTUALTABLE */ -#ifdef SQLITE_ENABLE_STAT2 - /* When sqlite_stat2 histogram data is available an operator of the - ** form "x IS NOT NULL" can sometimes be evaluated more efficiently - ** as "x>NULL" if x is not an INTEGER PRIMARY KEY. So construct a - ** virtual term of that form. - ** - ** Note that the virtual term must be tagged with TERM_VNULL. This - ** TERM_VNULL tag will suppress the not-null check at the beginning - ** of the loop. Without the TERM_VNULL flag, the not-null check at - ** the start of the loop will prevent any results from being returned. + /* Open all tables in the pTabList and any indices selected for + ** searching those tables. */ - if( pExpr->op==TK_NOTNULL - && pExpr->pLeft->op==TK_COLUMN - && pExpr->pLeft->iColumn>=0 - ){ - Expr *pNewExpr; - Expr *pLeft = pExpr->pLeft; - int idxNew; - WhereTerm *pNewTerm; - - pNewExpr = sqlite3PExpr(pParse, TK_GT, - sqlite3ExprDup(db, pLeft, 0), - sqlite3PExpr(pParse, TK_NULL, 0, 0, 0), 0); + notReady = ~(Bitmask)0; + for(ii=0, pLevel=pWInfo->a; iia[idxNew]; - pNewTerm->prereqRight = 0; - pNewTerm->leftCursor = pLeft->iTable; - pNewTerm->u.leftColumn = pLeft->iColumn; - pNewTerm->eOperator = WO_GT; - pNewTerm->iParent = idxTerm; - pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; - pTerm->wtFlags |= TERM_COPIED; - pNewTerm->prereqAll = pTerm->prereqAll; + pTabItem = &pTabList->a[pLevel->iFrom]; + pTab = pTabItem->pTab; + iDb = sqlite3SchemaToIndex(db, pTab->pSchema); + pLoop = pLevel->pWLoop; + if( (pTab->tabFlags & TF_Ephemeral)!=0 || pTab->pSelect ){ + /* Do nothing */ + }else +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)!=0 ){ + const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); + int iCur = pTabItem->iCursor; + sqlite3VdbeAddOp4(v, OP_VOpen, iCur, 0, 0, pVTab, P4_VTAB); + }else if( IsVirtual(pTab) ){ + /* noop */ + }else +#endif + if( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 + && (wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0 ){ + int op = OP_OpenRead; + if( pWInfo->okOnePass ){ + op = OP_OpenWrite; + pWInfo->aiCurOnePass[0] = pTabItem->iCursor; + }; + sqlite3OpenTable(pParse, pTabItem->iCursor, iDb, pTab, op); + assert( pTabItem->iCursor==pLevel->iTabCur ); + testcase( !pWInfo->okOnePass && pTab->nCol==BMS-1 ); + testcase( !pWInfo->okOnePass && pTab->nCol==BMS ); + if( !pWInfo->okOnePass && pTab->nColcolUsed; + int n = 0; + for(; b; b=b>>1, n++){} + sqlite3VdbeChangeP4(v, sqlite3VdbeCurrentAddr(v)-1, + SQLITE_INT_TO_PTR(n), P4_INT32); + assert( n<=pTab->nCol ); + } + }else{ + sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + } + if( pLoop->wsFlags & WHERE_INDEXED ){ + Index *pIx = pLoop->u.btree.pIndex; + int iIndexCur; + int op = OP_OpenRead; + /* iIdxCur is always set if to a positive value if ONEPASS is possible */ + assert( iIdxCur!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 ); + if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx) + && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 + ){ + /* This is one term of an OR-optimization using the PRIMARY KEY of a + ** WITHOUT ROWID table. No need for a separate index */ + iIndexCur = pLevel->iTabCur; + op = 0; + }else if( pWInfo->okOnePass ){ + Index *pJ = pTabItem->pTab->pIndex; + iIndexCur = iIdxCur; + assert( wctrlFlags & WHERE_ONEPASS_DESIRED ); + while( ALWAYS(pJ) && pJ!=pIx ){ + iIndexCur++; + pJ = pJ->pNext; + } + op = OP_OpenWrite; + pWInfo->aiCurOnePass[1] = iIndexCur; + }else if( iIdxCur && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ){ + iIndexCur = iIdxCur; + if( wctrlFlags & WHERE_REOPEN_IDX ) op = OP_ReopenIdx; + }else{ + iIndexCur = pParse->nTab++; + } + pLevel->iIdxCur = iIndexCur; + assert( pIx->pSchema==pTab->pSchema ); + assert( iIndexCur>=0 ); + if( op ){ + sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIx); + VdbeComment((v, "%s", pIx->zName)); + } } + if( iDb>=0 ) sqlite3CodeVerifySchema(pParse, iDb); + notReady &= ~getMask(&pWInfo->sMaskSet, pTabItem->iCursor); } -#endif /* SQLITE_ENABLE_STAT2 */ + pWInfo->iTop = sqlite3VdbeCurrentAddr(v); + if( db->mallocFailed ) goto whereBeginError; - /* Prevent ON clause terms of a LEFT JOIN from being used to drive - ** an index for tables to the left of the join. + /* Generate the code to do the search. Each iteration of the for + ** loop below generates code for a single nested loop of the VM + ** program. */ - pTerm->prereqRight |= extraRight; -} - -/* -** Return TRUE if any of the expressions in pList->a[iFirst...] contain -** a reference to any table other than the iBase table. -*/ -static int referencesOtherTables( - ExprList *pList, /* Search expressions in ths list */ - WhereMaskSet *pMaskSet, /* Mapping from tables to bitmaps */ - int iFirst, /* Be searching with the iFirst-th expression */ - int iBase /* Ignore references to this table */ -){ - Bitmask allowed = ~getMask(pMaskSet, iBase); - while( iFirstnExpr ){ - if( (exprTableUsage(pMaskSet, pList->a[iFirst++].pExpr)&allowed)!=0 ){ - return 1; + notReady = ~(Bitmask)0; + for(ii=0; iia[ii]; +#ifndef SQLITE_OMIT_AUTOMATIC_INDEX + if( (pLevel->pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 ){ + constructAutomaticIndex(pParse, &pWInfo->sWC, + &pTabList->a[pLevel->iFrom], notReady, pLevel); + if( db->mallocFailed ) goto whereBeginError; } +#endif + explainOneScan(pParse, pTabList, pLevel, ii, pLevel->iFrom, wctrlFlags); + pLevel->addrBody = sqlite3VdbeCurrentAddr(v); + notReady = codeOneLoopStart(pWInfo, ii, notReady); + pWInfo->iContinue = pLevel->addrCont; + } + + /* Done. */ + VdbeModuleComment((v, "Begin WHERE-core")); + return pWInfo; + + /* Jump here if malloc fails */ +whereBeginError: + if( pWInfo ){ + pParse->nQueryLoop = pWInfo->savedNQueryLoop; + whereInfoFree(db, pWInfo); } return 0; } - /* -** This routine decides if pIdx can be used to satisfy the ORDER BY -** clause. If it can, it returns 1. If pIdx cannot satisfy the -** ORDER BY clause, this routine returns 0. -** -** pOrderBy is an ORDER BY clause from a SELECT statement. pTab is the -** left-most table in the FROM clause of that same SELECT statement and -** the table has a cursor number of "base". pIdx is an index on pTab. -** -** nEqCol is the number of columns of pIdx that are used as equality -** constraints. Any of these columns may be missing from the ORDER BY -** clause and the match can still be a success. -** -** All terms of the ORDER BY that match against the index must be either -** ASC or DESC. (Terms of the ORDER BY clause past the end of a UNIQUE -** index do not need to satisfy this constraint.) The *pbRev value is -** set to 1 if the ORDER BY clause is all DESC and it is set to 0 if -** the ORDER BY clause is all ASC. +** Generate the end of the WHERE loop. See comments on +** sqlite3WhereBegin() for additional information. */ -static int isSortingIndex( - Parse *pParse, /* Parsing context */ - WhereMaskSet *pMaskSet, /* Mapping from table cursor numbers to bitmaps */ - Index *pIdx, /* The index we are testing */ - int base, /* Cursor number for the table to be sorted */ - ExprList *pOrderBy, /* The ORDER BY clause */ - int nEqCol, /* Number of index columns with == constraints */ - int wsFlags, /* Index usages flags */ - int *pbRev /* Set to 1 if ORDER BY is DESC */ -){ - int i, j; /* Loop counters */ - int sortOrder = 0; /* XOR of index and ORDER BY sort direction */ - int nTerm; /* Number of ORDER BY terms */ - struct ExprList_item *pTerm; /* A term of the ORDER BY clause */ +SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ + Parse *pParse = pWInfo->pParse; + Vdbe *v = pParse->pVdbe; + int i; + WhereLevel *pLevel; + WhereLoop *pLoop; + SrcList *pTabList = pWInfo->pTabList; sqlite3 *db = pParse->db; - assert( pOrderBy!=0 ); - nTerm = pOrderBy->nExpr; - assert( nTerm>0 ); - - /* Argument pIdx must either point to a 'real' named index structure, - ** or an index structure allocated on the stack by bestBtreeIndex() to - ** represent the rowid index that is part of every table. */ - assert( pIdx->zName || (pIdx->nColumn==1 && pIdx->aiColumn[0]==-1) ); - - /* Match terms of the ORDER BY clause against columns of - ** the index. - ** - ** Note that indices have pIdx->nColumn regular columns plus - ** one additional column containing the rowid. The rowid column - ** of the index is also allowed to match against the ORDER BY - ** clause. - */ - for(i=j=0, pTerm=pOrderBy->a; jnColumn; i++){ - Expr *pExpr; /* The expression of the ORDER BY pTerm */ - CollSeq *pColl; /* The collating sequence of pExpr */ - int termSortOrder; /* Sort order for this term */ - int iColumn; /* The i-th column of the index. -1 for rowid */ - int iSortOrder; /* 1 for DESC, 0 for ASC on the i-th index term */ - const char *zColl; /* Name of the collating sequence for i-th index term */ - - pExpr = pTerm->pExpr; - if( pExpr->op!=TK_COLUMN || pExpr->iTable!=base ){ - /* Can not use an index sort on anything that is not a column in the - ** left-most table of the FROM clause */ - break; + /* Generate loop termination code. + */ + VdbeModuleComment((v, "End WHERE-core")); + sqlite3ExprCacheClear(pParse); + for(i=pWInfo->nLevel-1; i>=0; i--){ + int addr; + pLevel = &pWInfo->a[i]; + pLoop = pLevel->pWLoop; + sqlite3VdbeResolveLabel(v, pLevel->addrCont); + if( pLevel->op!=OP_Noop ){ + sqlite3VdbeAddOp3(v, pLevel->op, pLevel->p1, pLevel->p2, pLevel->p3); + sqlite3VdbeChangeP5(v, pLevel->p5); + VdbeCoverage(v); + VdbeCoverageIf(v, pLevel->op==OP_Next); + VdbeCoverageIf(v, pLevel->op==OP_Prev); + VdbeCoverageIf(v, pLevel->op==OP_VNext); } - pColl = sqlite3ExprCollSeq(pParse, pExpr); - if( !pColl ){ - pColl = db->pDfltColl; + if( pLoop->wsFlags & WHERE_IN_ABLE && pLevel->u.in.nIn>0 ){ + struct InLoop *pIn; + int j; + sqlite3VdbeResolveLabel(v, pLevel->addrNxt); + for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){ + sqlite3VdbeJumpHere(v, pIn->addrInTop+1); + sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop); + VdbeCoverage(v); + VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen); + VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen); + sqlite3VdbeJumpHere(v, pIn->addrInTop-1); + } + sqlite3DbFree(db, pLevel->u.in.aInLoop); } - if( pIdx->zName && inColumn ){ - iColumn = pIdx->aiColumn[i]; - if( iColumn==pIdx->pTable->iPKey ){ - iColumn = -1; + sqlite3VdbeResolveLabel(v, pLevel->addrBrk); + if( pLevel->addrSkip ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrSkip); + VdbeComment((v, "next skip-scan on %s", pLoop->u.btree.pIndex->zName)); + sqlite3VdbeJumpHere(v, pLevel->addrSkip); + sqlite3VdbeJumpHere(v, pLevel->addrSkip-2); + } + if( pLevel->iLeftJoin ){ + addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin); VdbeCoverage(v); + assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 + || (pLoop->wsFlags & WHERE_INDEXED)!=0 ); + if( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 ){ + sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor); } - iSortOrder = pIdx->aSortOrder[i]; - zColl = pIdx->azColl[i]; - }else{ - iColumn = -1; - iSortOrder = 0; - zColl = pColl->zName; - } - if( pExpr->iColumn!=iColumn || sqlite3StrICmp(pColl->zName, zColl) ){ - /* Term j of the ORDER BY clause does not match column i of the index */ - if( inColumn ){ - /* Index column i is the rowid. All other terms match. */ - break; + if( pLoop->wsFlags & WHERE_INDEXED ){ + sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iIdxCur); + } + if( pLevel->op==OP_Return ){ + sqlite3VdbeAddOp2(v, OP_Gosub, pLevel->p1, pLevel->addrFirst); }else{ - /* If an index column fails to match and is not constrained by == - ** then the index cannot satisfy the ORDER BY constraint. - */ - return 0; + sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrFirst); + } + sqlite3VdbeJumpHere(v, addr); + } + VdbeModuleComment((v, "End WHERE-loop%d: %s", i, + pWInfo->pTabList->a[pLevel->iFrom].pTab->zName)); + } + + /* The "break" point is here, just past the end of the outer loop. + ** Set it. + */ + sqlite3VdbeResolveLabel(v, pWInfo->iBreak); + + assert( pWInfo->nLevel<=pTabList->nSrc ); + for(i=0, pLevel=pWInfo->a; inLevel; i++, pLevel++){ + int k, last; + VdbeOp *pOp; + Index *pIdx = 0; + struct SrcList_item *pTabItem = &pTabList->a[pLevel->iFrom]; + Table *pTab = pTabItem->pTab; + assert( pTab!=0 ); + pLoop = pLevel->pWLoop; + + /* For a co-routine, change all OP_Column references to the table of + ** the co-routine into OP_SCopy of result contained in a register. + ** OP_Rowid becomes OP_Null. + */ + if( pTabItem->viaCoroutine && !db->mallocFailed ){ + last = sqlite3VdbeCurrentAddr(v); + k = pLevel->addrBody; + pOp = sqlite3VdbeGetOp(v, k); + for(; kp1!=pLevel->iTabCur ) continue; + if( pOp->opcode==OP_Column ){ + pOp->opcode = OP_Copy; + pOp->p1 = pOp->p2 + pTabItem->regResult; + pOp->p2 = pOp->p3; + pOp->p3 = 0; + }else if( pOp->opcode==OP_Rowid ){ + pOp->opcode = OP_Null; + pOp->p1 = 0; + pOp->p3 = 0; + } + } + continue; + } + + /* Close all of the cursors that were opened by sqlite3WhereBegin. + ** Except, do not close cursors that will be reused by the OR optimization + ** (WHERE_OMIT_OPEN_CLOSE). And do not close the OP_OpenWrite cursors + ** created for the ONEPASS optimization. + */ + if( (pTab->tabFlags & TF_Ephemeral)==0 + && pTab->pSelect==0 + && (pWInfo->wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0 + ){ + int ws = pLoop->wsFlags; + if( !pWInfo->okOnePass && (ws & WHERE_IDX_ONLY)==0 ){ + sqlite3VdbeAddOp1(v, OP_Close, pTabItem->iCursor); + } + if( (ws & WHERE_INDEXED)!=0 + && (ws & (WHERE_IPK|WHERE_AUTO_INDEX))==0 + && pLevel->iIdxCur!=pWInfo->aiCurOnePass[1] + ){ + sqlite3VdbeAddOp1(v, OP_Close, pLevel->iIdxCur); } } - assert( pIdx->aSortOrder!=0 || iColumn==-1 ); - assert( pTerm->sortOrder==0 || pTerm->sortOrder==1 ); - assert( iSortOrder==0 || iSortOrder==1 ); - termSortOrder = iSortOrder ^ pTerm->sortOrder; - if( i>nEqCol ){ - if( termSortOrder!=sortOrder ){ - /* Indices can only be used if all ORDER BY terms past the - ** equality constraints are all either DESC or ASC. */ - return 0; - } - }else{ - sortOrder = termSortOrder; + + /* If this scan uses an index, make VDBE code substitutions to read data + ** from the index instead of from the table where possible. In some cases + ** this optimization prevents the table from ever being read, which can + ** yield a significant performance boost. + ** + ** Calls to the code generator in between sqlite3WhereBegin and + ** sqlite3WhereEnd will have created code that references the table + ** directly. This loop scans all that code looking for opcodes + ** that reference the table and converts them into opcodes that + ** reference the index. + */ + if( pLoop->wsFlags & (WHERE_INDEXED|WHERE_IDX_ONLY) ){ + pIdx = pLoop->u.btree.pIndex; + }else if( pLoop->wsFlags & WHERE_MULTI_OR ){ + pIdx = pLevel->u.pCovidx; } - j++; - pTerm++; - if( iColumn<0 && !referencesOtherTables(pOrderBy, pMaskSet, j, base) ){ - /* If the indexed column is the primary key and everything matches - ** so far and none of the ORDER BY terms to the right reference other - ** tables in the join, then we are assured that the index can be used - ** to sort because the primary key is unique and so none of the other - ** columns will make any difference - */ - j = nTerm; + if( pIdx && !db->mallocFailed ){ + last = sqlite3VdbeCurrentAddr(v); + k = pLevel->addrBody; + pOp = sqlite3VdbeGetOp(v, k); + for(; kp1!=pLevel->iTabCur ) continue; + if( pOp->opcode==OP_Column ){ + int x = pOp->p2; + assert( pIdx->pTable==pTab ); + if( !HasRowid(pTab) ){ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + x = pPk->aiColumn[x]; + } + x = sqlite3ColumnOfIndex(pIdx, x); + if( x>=0 ){ + pOp->p2 = x; + pOp->p1 = pLevel->iIdxCur; + } + assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 || x>=0 ); + }else if( pOp->opcode==OP_Rowid ){ + pOp->p1 = pLevel->iIdxCur; + pOp->opcode = OP_IdxRowid; + } + } } } - *pbRev = sortOrder!=0; - if( j>=nTerm ){ - /* All terms of the ORDER BY clause are covered by this index so - ** this index can be used for sorting. */ - return 1; - } - if( pIdx->onError!=OE_None && i==pIdx->nColumn - && (wsFlags & WHERE_COLUMN_NULL)==0 - && !referencesOtherTables(pOrderBy, pMaskSet, j, base) ){ - /* All terms of this index match some prefix of the ORDER BY clause - ** and the index is UNIQUE and no terms on the tail of the ORDER BY - ** clause reference other tables in a join. If this is all true then - ** the order by clause is superfluous. Not that if the matching - ** condition is IS NULL then the result is not necessarily unique - ** even on a UNIQUE index, so disallow those cases. */ - return 1; - } - return 0; + /* Final cleanup + */ + pParse->nQueryLoop = pWInfo->savedNQueryLoop; + whereInfoFree(db, pWInfo); + return; } -/* -** Prepare a crude estimate of the logarithm of the input value. -** The results need not be exact. This is only used for estimating -** the total cost of performing operations with O(logN) or O(NlogN) -** complexity. Because N is just a guess, it is no great tragedy if -** logN is a little off. +/************** End of where.c ***********************************************/ +/************** Begin file parse.c *******************************************/ +/* Driver template for the LEMON parser generator. +** The author disclaims copyright to this source code. +** +** This version of "lempar.c" is modified, slightly, for use by SQLite. +** The only modifications are the addition of a couple of NEVER() +** macros to disable tests that are needed in the case of a general +** LALR(1) grammar but which are always false in the +** specific grammar used by SQLite. */ -static double estLog(double N){ - double logN = 1; - double x = 10; - while( N>x ){ - logN += 1; - x *= 10; - } - return logN; -} +/* First off, code is included that follows the "include" declaration +** in the input grammar file. */ +/* #include */ + /* -** Two routines for printing the content of an sqlite3_index_info -** structure. Used for testing and debugging only. If neither -** SQLITE_TEST or SQLITE_DEBUG are defined, then these routines -** are no-ops. +** Disable all error recovery processing in the parser push-down +** automaton. */ -#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_DEBUG) -static void TRACE_IDX_INPUTS(sqlite3_index_info *p){ - int i; - if( !sqlite3WhereTrace ) return; - for(i=0; inConstraint; i++){ - sqlite3DebugPrintf(" constraint[%d]: col=%d termid=%d op=%d usabled=%d\n", - i, - p->aConstraint[i].iColumn, - p->aConstraint[i].iTermOffset, - p->aConstraint[i].op, - p->aConstraint[i].usable); - } - for(i=0; inOrderBy; i++){ - sqlite3DebugPrintf(" orderby[%d]: col=%d desc=%d\n", - i, - p->aOrderBy[i].iColumn, - p->aOrderBy[i].desc); - } -} -static void TRACE_IDX_OUTPUTS(sqlite3_index_info *p){ - int i; - if( !sqlite3WhereTrace ) return; - for(i=0; inConstraint; i++){ - sqlite3DebugPrintf(" usage[%d]: argvIdx=%d omit=%d\n", - i, - p->aConstraintUsage[i].argvIndex, - p->aConstraintUsage[i].omit); - } - sqlite3DebugPrintf(" idxNum=%d\n", p->idxNum); - sqlite3DebugPrintf(" idxStr=%s\n", p->idxStr); - sqlite3DebugPrintf(" orderByConsumed=%d\n", p->orderByConsumed); - sqlite3DebugPrintf(" estimatedCost=%g\n", p->estimatedCost); -} -#else -#define TRACE_IDX_INPUTS(A) -#define TRACE_IDX_OUTPUTS(A) -#endif +#define YYNOERRORRECOVERY 1 -/* -** Required because bestIndex() is called by bestOrClauseIndex() +/* +** Make yytestcase() the same as testcase() */ -static void bestIndex( - Parse*, WhereClause*, struct SrcList_item*, - Bitmask, Bitmask, ExprList*, WhereCost*); +#define yytestcase(X) testcase(X) /* -** This routine attempts to find an scanning strategy that can be used -** to optimize an 'OR' expression that is part of a WHERE clause. -** -** The table associated with FROM clause term pSrc may be either a -** regular B-Tree table or a virtual table. +** An instance of this structure holds information about the +** LIMIT clause of a SELECT statement. */ -static void bestOrClauseIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to search */ - Bitmask notReady, /* Mask of cursors not available for indexing */ - Bitmask notValid, /* Cursors not available for any purpose */ - ExprList *pOrderBy, /* The ORDER BY clause */ - WhereCost *pCost /* Lowest cost query plan */ -){ -#ifndef SQLITE_OMIT_OR_OPTIMIZATION - const int iCur = pSrc->iCursor; /* The cursor of the table to be accessed */ - const Bitmask maskSrc = getMask(pWC->pMaskSet, iCur); /* Bitmask for pSrc */ - WhereTerm * const pWCEnd = &pWC->a[pWC->nTerm]; /* End of pWC->a[] */ - WhereTerm *pTerm; /* A single term of the WHERE clause */ - - /* No OR-clause optimization allowed if the INDEXED BY or NOT INDEXED clauses - ** are used */ - if( pSrc->notIndexed || pSrc->pIndex!=0 ){ - return; - } - - /* Search the WHERE clause terms for a usable WO_OR term. */ - for(pTerm=pWC->a; pTermeOperator==WO_OR - && ((pTerm->prereqAll & ~maskSrc) & notReady)==0 - && (pTerm->u.pOrInfo->indexable & maskSrc)!=0 - ){ - WhereClause * const pOrWC = &pTerm->u.pOrInfo->wc; - WhereTerm * const pOrWCEnd = &pOrWC->a[pOrWC->nTerm]; - WhereTerm *pOrTerm; - int flags = WHERE_MULTI_OR; - double rTotal = 0; - double nRow = 0; - Bitmask used = 0; - - for(pOrTerm=pOrWC->a; pOrTerma), (pTerm - pWC->a) - )); - if( pOrTerm->eOperator==WO_AND ){ - WhereClause *pAndWC = &pOrTerm->u.pAndInfo->wc; - bestIndex(pParse, pAndWC, pSrc, notReady, notValid, 0, &sTermCost); - }else if( pOrTerm->leftCursor==iCur ){ - WhereClause tempWC; - tempWC.pParse = pWC->pParse; - tempWC.pMaskSet = pWC->pMaskSet; - tempWC.op = TK_AND; - tempWC.a = pOrTerm; - tempWC.nTerm = 1; - bestIndex(pParse, &tempWC, pSrc, notReady, notValid, 0, &sTermCost); - }else{ - continue; - } - rTotal += sTermCost.rCost; - nRow += sTermCost.plan.nRow; - used |= sTermCost.used; - if( rTotal>=pCost->rCost ) break; - } - - /* If there is an ORDER BY clause, increase the scan cost to account - ** for the cost of the sort. */ - if( pOrderBy!=0 ){ - WHERETRACE(("... sorting increases OR cost %.9g to %.9g\n", - rTotal, rTotal+nRow*estLog(nRow))); - rTotal += nRow*estLog(nRow); - } +struct LimitVal { + Expr *pLimit; /* The LIMIT expression. NULL if there is no limit */ + Expr *pOffset; /* The OFFSET expression. NULL if there is none */ +}; - /* If the cost of scanning using this OR term for optimization is - ** less than the current cost stored in pCost, replace the contents - ** of pCost. */ - WHERETRACE(("... multi-index OR cost=%.9g nrow=%.9g\n", rTotal, nRow)); - if( rTotalrCost ){ - pCost->rCost = rTotal; - pCost->used = used; - pCost->plan.nRow = nRow; - pCost->plan.wsFlags = flags; - pCost->plan.u.pTerm = pTerm; - } - } - } -#endif /* SQLITE_OMIT_OR_OPTIMIZATION */ -} +/* +** An instance of this structure is used to store the LIKE, +** GLOB, NOT LIKE, and NOT GLOB operators. +*/ +struct LikeOp { + Token eOperator; /* "like" or "glob" or "regexp" */ + int bNot; /* True if the NOT keyword is present */ +}; -#ifndef SQLITE_OMIT_AUTOMATIC_INDEX /* -** Return TRUE if the WHERE clause term pTerm is of a form where it -** could be used with an index to access pSrc, assuming an appropriate -** index existed. +** An instance of the following structure describes the event of a +** TRIGGER. "a" is the event type, one of TK_UPDATE, TK_INSERT, +** TK_DELETE, or TK_INSTEAD. If the event is of the form +** +** UPDATE ON (a,b,c) +** +** Then the "b" IdList records the list "a,b,c". */ -static int termCanDriveIndex( - WhereTerm *pTerm, /* WHERE clause term to check */ - struct SrcList_item *pSrc, /* Table we are trying to access */ - Bitmask notReady /* Tables in outer loops of the join */ -){ - char aff; - if( pTerm->leftCursor!=pSrc->iCursor ) return 0; - if( pTerm->eOperator!=WO_EQ ) return 0; - if( (pTerm->prereqRight & notReady)!=0 ) return 0; - aff = pSrc->pTab->aCol[pTerm->u.leftColumn].affinity; - if( !sqlite3IndexAffinityOk(pTerm->pExpr, aff) ) return 0; - return 1; -} -#endif +struct TrigEvent { int a; IdList * b; }; -#ifndef SQLITE_OMIT_AUTOMATIC_INDEX /* -** If the query plan for pSrc specified in pCost is a full table scan -** and indexing is allows (if there is no NOT INDEXED clause) and it -** possible to construct a transient index that would perform better -** than a full table scan even when the cost of constructing the index -** is taken into account, then alter the query plan to use the -** transient index. +** An instance of this structure holds the ATTACH key and the key type. */ -static void bestAutomaticIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to search */ - Bitmask notReady, /* Mask of cursors that are not available */ - WhereCost *pCost /* Lowest cost query plan */ -){ - double nTableRow; /* Rows in the input table */ - double logN; /* log(nTableRow) */ - double costTempIdx; /* per-query cost of the transient index */ - WhereTerm *pTerm; /* A single term of the WHERE clause */ - WhereTerm *pWCEnd; /* End of pWC->a[] */ - Table *pTable; /* Table tht might be indexed */ +struct AttachKey { int type; Token key; }; - if( (pParse->db->flags & SQLITE_AutoIndex)==0 ){ - /* Automatic indices are disabled at run-time */ - return; - } - if( (pCost->plan.wsFlags & WHERE_NOT_FULLSCAN)!=0 ){ - /* We already have some kind of index in use for this query. */ - return; + + /* This is a utility routine used to set the ExprSpan.zStart and + ** ExprSpan.zEnd values of pOut so that the span covers the complete + ** range of text beginning with pStart and going to the end of pEnd. + */ + static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){ + pOut->zStart = pStart->z; + pOut->zEnd = &pEnd->z[pEnd->n]; } - if( pSrc->notIndexed ){ - /* The NOT INDEXED clause appears in the SQL. */ - return; + + /* Construct a new Expr object from a single identifier. Use the + ** new Expr to populate pOut. Set the span of pOut to be the identifier + ** that created the expression. + */ + static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token *pValue){ + pOut->pExpr = sqlite3PExpr(pParse, op, 0, 0, pValue); + pOut->zStart = pValue->z; + pOut->zEnd = &pValue->z[pValue->n]; } - assert( pParse->nQueryLoop >= (double)1 ); - pTable = pSrc->pTab; - nTableRow = pTable->nRowEst; - logN = estLog(nTableRow); - costTempIdx = 2*logN*(nTableRow/pParse->nQueryLoop + 1); - if( costTempIdx>=pCost->rCost ){ - /* The cost of creating the transient table would be greater than - ** doing the full table scan */ - return; + /* This routine constructs a binary expression node out of two ExprSpan + ** objects and uses the result to populate a new ExprSpan object. + */ + static void spanBinaryExpr( + ExprSpan *pOut, /* Write the result here */ + Parse *pParse, /* The parsing context. Errors accumulate here */ + int op, /* The binary operation */ + ExprSpan *pLeft, /* The left operand */ + ExprSpan *pRight /* The right operand */ + ){ + pOut->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr, 0); + pOut->zStart = pLeft->zStart; + pOut->zEnd = pRight->zEnd; } - /* Search for any equality comparison term */ - pWCEnd = &pWC->a[pWC->nTerm]; - for(pTerm=pWC->a; pTermrCost, costTempIdx)); - pCost->rCost = costTempIdx; - pCost->plan.nRow = logN + 1; - pCost->plan.wsFlags = WHERE_TEMP_INDEX; - pCost->used = pTerm->prereqRight; - break; + /* Construct an expression node for a unary postfix operator + */ + static void spanUnaryPostfix( + ExprSpan *pOut, /* Write the new expression node here */ + Parse *pParse, /* Parsing context to record errors */ + int op, /* The operator */ + ExprSpan *pOperand, /* The operand */ + Token *pPostOp /* The operand token for setting the span */ + ){ + pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); + pOut->zStart = pOperand->zStart; + pOut->zEnd = &pPostOp->z[pPostOp->n]; + } + + /* A routine to convert a binary TK_IS or TK_ISNOT expression into a + ** unary TK_ISNULL or TK_NOTNULL expression. */ + static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){ + sqlite3 *db = pParse->db; + if( pY && pA && pY->op==TK_NULL ){ + pA->op = (u8)op; + sqlite3ExprDelete(db, pA->pRight); + pA->pRight = 0; } } -} -#else -# define bestAutomaticIndex(A,B,C,D,E) /* no-op */ -#endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ + /* Construct an expression node for a unary prefix operator + */ + static void spanUnaryPrefix( + ExprSpan *pOut, /* Write the new expression node here */ + Parse *pParse, /* Parsing context to record errors */ + int op, /* The operator */ + ExprSpan *pOperand, /* The operand */ + Token *pPreOp /* The operand token for setting the span */ + ){ + pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); + pOut->zStart = pPreOp->z; + pOut->zEnd = pOperand->zEnd; + } +/* Next is all token values, in a form suitable for use by makeheaders. +** This section will be null unless lemon is run with the -m switch. +*/ +/* +** These constants (all generated automatically by the parser generator) +** specify the various kinds of tokens (terminals) that the parser +** understands. +** +** Each symbol here is a terminal symbol in the grammar. +*/ +/* Make sure the INTERFACE macro is defined. +*/ +#ifndef INTERFACE +# define INTERFACE 1 +#endif +/* The next thing included is series of defines which control +** various aspects of the generated parser. +** YYCODETYPE is the data type used for storing terminal +** and nonterminal numbers. "unsigned char" is +** used if there are fewer than 250 terminals +** and nonterminals. "int" is used otherwise. +** YYNOCODE is a number of type YYCODETYPE which corresponds +** to no legal terminal or nonterminal number. This +** number is used to fill in empty slots of the hash +** table. +** YYFALLBACK If defined, this indicates that one or more tokens +** have fall-back values which should be used if the +** original value of the token will not parse. +** YYACTIONTYPE is the data type used for storing terminal +** and nonterminal numbers. "unsigned char" is +** used if there are fewer than 250 rules and +** states combined. "int" is used otherwise. +** sqlite3ParserTOKENTYPE is the data type used for minor tokens given +** directly to the parser from the tokenizer. +** YYMINORTYPE is the data type used for all minor tokens. +** This is typically a union of many types, one of +** which is sqlite3ParserTOKENTYPE. The entry in the union +** for base tokens is called "yy0". +** YYSTACKDEPTH is the maximum depth of the parser's stack. If +** zero the stack is dynamically sized using realloc() +** sqlite3ParserARG_SDECL A static variable declaration for the %extra_argument +** sqlite3ParserARG_PDECL A parameter declaration for the %extra_argument +** sqlite3ParserARG_STORE Code to store %extra_argument into yypParser +** sqlite3ParserARG_FETCH Code to extract %extra_argument from yypParser +** YYNSTATE the combined number of states. +** YYNRULE the number of rules in the grammar +** YYERRORSYMBOL is the code number of the error symbol. If not +** defined, then do no error processing. +*/ +#define YYCODETYPE unsigned char +#define YYNOCODE 254 +#define YYACTIONTYPE unsigned short int +#define YYWILDCARD 70 +#define sqlite3ParserTOKENTYPE Token +typedef union { + int yyinit; + sqlite3ParserTOKENTYPE yy0; + Select* yy3; + ExprList* yy14; + With* yy59; + SrcList* yy65; + struct LikeOp yy96; + Expr* yy132; + u8 yy186; + int yy328; + ExprSpan yy346; + struct TrigEvent yy378; + u16 yy381; + IdList* yy408; + struct {int value; int mask;} yy429; + TriggerStep* yy473; + struct LimitVal yy476; +} YYMINORTYPE; +#ifndef YYSTACKDEPTH +#define YYSTACKDEPTH 100 +#endif +#define sqlite3ParserARG_SDECL Parse *pParse; +#define sqlite3ParserARG_PDECL ,Parse *pParse +#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse +#define sqlite3ParserARG_STORE yypParser->pParse = pParse +#define YYNSTATE 642 +#define YYNRULE 327 +#define YYFALLBACK 1 +#define YY_NO_ACTION (YYNSTATE+YYNRULE+2) +#define YY_ACCEPT_ACTION (YYNSTATE+YYNRULE+1) +#define YY_ERROR_ACTION (YYNSTATE+YYNRULE) + +/* The yyzerominor constant is used to initialize instances of +** YYMINORTYPE objects to zero. */ +static const YYMINORTYPE yyzerominor = { 0 }; -#ifndef SQLITE_OMIT_AUTOMATIC_INDEX -/* -** Generate code to construct the Index object for an automatic index -** and to set up the WhereLevel object pLevel so that the code generator -** makes use of the automatic index. +/* Define the yytestcase() macro to be a no-op if is not already defined +** otherwise. +** +** Applications can choose to define yytestcase() in the %include section +** to a macro that can assist in verifying code coverage. For production +** code the yytestcase() macro should be turned off. But it is useful +** for testing. */ -static void constructAutomaticIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to get the next index */ - Bitmask notReady, /* Mask of cursors that are not available */ - WhereLevel *pLevel /* Write new index here */ -){ - int nColumn; /* Number of columns in the constructed index */ - WhereTerm *pTerm; /* A single term of the WHERE clause */ - WhereTerm *pWCEnd; /* End of pWC->a[] */ - int nByte; /* Byte of memory needed for pIdx */ - Index *pIdx; /* Object describing the transient index */ - Vdbe *v; /* Prepared statement under construction */ - int regIsInit; /* Register set by initialization */ - int addrInit; /* Address of the initialization bypass jump */ - Table *pTable; /* The table being indexed */ - KeyInfo *pKeyinfo; /* Key information for the index */ - int addrTop; /* Top of the index fill loop */ - int regRecord; /* Register holding an index record */ - int n; /* Column counter */ - int i; /* Loop counter */ - int mxBitCol; /* Maximum column in pSrc->colUsed */ - CollSeq *pColl; /* Collating sequence to on a column */ - Bitmask idxCols; /* Bitmap of columns used for indexing */ - Bitmask extraCols; /* Bitmap of additional columns */ +#ifndef yytestcase +# define yytestcase(X) +#endif - /* Generate code to skip over the creation and initialization of the - ** transient index on 2nd and subsequent iterations of the loop. */ - v = pParse->pVdbe; - assert( v!=0 ); - regIsInit = ++pParse->nMem; - addrInit = sqlite3VdbeAddOp1(v, OP_If, regIsInit); - sqlite3VdbeAddOp2(v, OP_Integer, 1, regIsInit); - /* Count the number of columns that will be added to the index - ** and used to match WHERE clause constraints */ - nColumn = 0; - pTable = pSrc->pTab; - pWCEnd = &pWC->a[pWC->nTerm]; - idxCols = 0; - for(pTerm=pWC->a; pTermu.leftColumn; - Bitmask cMask = iCol>=BMS ? ((Bitmask)1)<<(BMS-1) : ((Bitmask)1)<0 ); - pLevel->plan.nEq = nColumn; +/* Next are the tables used to determine what action to take based on the +** current state and lookahead token. These tables are used to implement +** functions that take a state number and lookahead value and return an +** action integer. +** +** Suppose the action integer is N. Then the action is determined as +** follows +** +** 0 <= N < YYNSTATE Shift N. That is, push the lookahead +** token onto the stack and goto state N. +** +** YYNSTATE <= N < YYNSTATE+YYNRULE Reduce by rule N-YYNSTATE. +** +** N == YYNSTATE+YYNRULE A syntax error has occurred. +** +** N == YYNSTATE+YYNRULE+1 The parser accepts its input. +** +** N == YYNSTATE+YYNRULE+2 No such action. Denotes unused +** slots in the yy_action[] table. +** +** The action table is constructed as a single large table named yy_action[]. +** Given state S and lookahead X, the action is computed as +** +** yy_action[ yy_shift_ofst[S] + X ] +** +** If the index value yy_shift_ofst[S]+X is out of range or if the value +** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X or if yy_shift_ofst[S] +** is equal to YY_SHIFT_USE_DFLT, it means that the action is not in the table +** and that yy_default[S] should be used instead. +** +** The formula above is for computing the action when the lookahead is +** a terminal symbol. If the lookahead is a non-terminal (as occurs after +** a reduce action) then the yy_reduce_ofst[] array is used in place of +** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of +** YY_SHIFT_USE_DFLT. +** +** The following are the tables generated in this section: +** +** yy_action[] A single table containing all actions. +** yy_lookahead[] A table containing the lookahead for each entry in +** yy_action. Used to detect hash collisions. +** yy_shift_ofst[] For each state, the offset into yy_action for +** shifting terminals. +** yy_reduce_ofst[] For each state, the offset into yy_action for +** shifting non-terminals after a reduce. +** yy_default[] Default action for each state. +*/ +#define YY_ACTTAB_COUNT (1497) +static const YYACTIONTYPE yy_action[] = { + /* 0 */ 306, 212, 432, 955, 639, 191, 955, 295, 559, 88, + /* 10 */ 88, 88, 88, 81, 86, 86, 86, 86, 85, 85, + /* 20 */ 84, 84, 84, 83, 330, 185, 184, 183, 635, 635, + /* 30 */ 292, 606, 606, 88, 88, 88, 88, 683, 86, 86, + /* 40 */ 86, 86, 85, 85, 84, 84, 84, 83, 330, 16, + /* 50 */ 436, 597, 89, 90, 80, 600, 599, 601, 601, 87, + /* 60 */ 87, 88, 88, 88, 88, 684, 86, 86, 86, 86, + /* 70 */ 85, 85, 84, 84, 84, 83, 330, 306, 559, 84, + /* 80 */ 84, 84, 83, 330, 65, 86, 86, 86, 86, 85, + /* 90 */ 85, 84, 84, 84, 83, 330, 635, 635, 634, 633, + /* 100 */ 182, 682, 550, 379, 376, 375, 17, 322, 606, 606, + /* 110 */ 371, 198, 479, 91, 374, 82, 79, 165, 85, 85, + /* 120 */ 84, 84, 84, 83, 330, 598, 635, 635, 107, 89, + /* 130 */ 90, 80, 600, 599, 601, 601, 87, 87, 88, 88, + /* 140 */ 88, 88, 186, 86, 86, 86, 86, 85, 85, 84, + /* 150 */ 84, 84, 83, 330, 306, 594, 594, 142, 328, 327, + /* 160 */ 484, 249, 344, 238, 635, 635, 634, 633, 585, 448, + /* 170 */ 526, 525, 229, 388, 1, 394, 450, 584, 449, 635, + /* 180 */ 635, 635, 635, 319, 395, 606, 606, 199, 157, 273, + /* 190 */ 382, 268, 381, 187, 635, 635, 634, 633, 311, 555, + /* 200 */ 266, 593, 593, 266, 347, 588, 89, 90, 80, 600, + /* 210 */ 599, 601, 601, 87, 87, 88, 88, 88, 88, 478, + /* 220 */ 86, 86, 86, 86, 85, 85, 84, 84, 84, 83, + /* 230 */ 330, 306, 272, 536, 634, 633, 146, 610, 197, 310, + /* 240 */ 575, 182, 482, 271, 379, 376, 375, 506, 21, 634, + /* 250 */ 633, 634, 633, 635, 635, 374, 611, 574, 548, 440, + /* 260 */ 111, 563, 606, 606, 634, 633, 324, 479, 608, 608, + /* 270 */ 608, 300, 435, 573, 119, 407, 210, 162, 562, 883, + /* 280 */ 592, 592, 306, 89, 90, 80, 600, 599, 601, 601, + /* 290 */ 87, 87, 88, 88, 88, 88, 506, 86, 86, 86, + /* 300 */ 86, 85, 85, 84, 84, 84, 83, 330, 620, 111, + /* 310 */ 635, 635, 361, 606, 606, 358, 249, 349, 248, 433, + /* 320 */ 243, 479, 586, 634, 633, 195, 611, 93, 119, 221, + /* 330 */ 575, 497, 534, 534, 89, 90, 80, 600, 599, 601, + /* 340 */ 601, 87, 87, 88, 88, 88, 88, 574, 86, 86, + /* 350 */ 86, 86, 85, 85, 84, 84, 84, 83, 330, 306, + /* 360 */ 77, 429, 638, 573, 589, 530, 240, 230, 242, 105, + /* 370 */ 249, 349, 248, 515, 588, 208, 460, 529, 564, 173, + /* 380 */ 634, 633, 970, 144, 430, 2, 424, 228, 380, 557, + /* 390 */ 606, 606, 190, 153, 159, 158, 514, 51, 632, 631, + /* 400 */ 630, 71, 536, 432, 954, 196, 610, 954, 614, 45, + /* 410 */ 18, 89, 90, 80, 600, 599, 601, 601, 87, 87, + /* 420 */ 88, 88, 88, 88, 261, 86, 86, 86, 86, 85, + /* 430 */ 85, 84, 84, 84, 83, 330, 306, 608, 608, 608, + /* 440 */ 542, 424, 402, 385, 241, 506, 451, 320, 211, 543, + /* 450 */ 164, 436, 386, 293, 451, 587, 108, 496, 111, 334, + /* 460 */ 391, 591, 424, 614, 27, 452, 453, 606, 606, 72, + /* 470 */ 257, 70, 259, 452, 339, 342, 564, 582, 68, 415, + /* 480 */ 469, 328, 327, 62, 614, 45, 110, 393, 89, 90, + /* 490 */ 80, 600, 599, 601, 601, 87, 87, 88, 88, 88, + /* 500 */ 88, 152, 86, 86, 86, 86, 85, 85, 84, 84, + /* 510 */ 84, 83, 330, 306, 110, 499, 520, 538, 402, 389, + /* 520 */ 424, 110, 566, 500, 593, 593, 454, 82, 79, 165, + /* 530 */ 424, 591, 384, 564, 340, 615, 188, 162, 424, 350, + /* 540 */ 616, 424, 614, 44, 606, 606, 445, 582, 300, 434, + /* 550 */ 151, 19, 614, 9, 568, 580, 348, 615, 469, 567, + /* 560 */ 614, 26, 616, 614, 45, 89, 90, 80, 600, 599, + /* 570 */ 601, 601, 87, 87, 88, 88, 88, 88, 411, 86, + /* 580 */ 86, 86, 86, 85, 85, 84, 84, 84, 83, 330, + /* 590 */ 306, 579, 110, 578, 521, 282, 433, 398, 400, 255, + /* 600 */ 486, 82, 79, 165, 487, 164, 82, 79, 165, 488, + /* 610 */ 488, 364, 387, 424, 544, 544, 509, 350, 362, 155, + /* 620 */ 191, 606, 606, 559, 642, 640, 333, 82, 79, 165, + /* 630 */ 305, 564, 507, 312, 357, 614, 45, 329, 596, 595, + /* 640 */ 194, 337, 89, 90, 80, 600, 599, 601, 601, 87, + /* 650 */ 87, 88, 88, 88, 88, 424, 86, 86, 86, 86, + /* 660 */ 85, 85, 84, 84, 84, 83, 330, 306, 20, 323, + /* 670 */ 150, 263, 211, 543, 421, 596, 595, 614, 22, 424, + /* 680 */ 193, 424, 284, 424, 391, 424, 509, 424, 577, 424, + /* 690 */ 186, 335, 424, 559, 424, 313, 120, 546, 606, 606, + /* 700 */ 67, 614, 47, 614, 50, 614, 48, 614, 100, 614, + /* 710 */ 99, 614, 101, 576, 614, 102, 614, 109, 326, 89, + /* 720 */ 90, 80, 600, 599, 601, 601, 87, 87, 88, 88, + /* 730 */ 88, 88, 424, 86, 86, 86, 86, 85, 85, 84, + /* 740 */ 84, 84, 83, 330, 306, 424, 311, 424, 585, 54, + /* 750 */ 424, 516, 517, 590, 614, 112, 424, 584, 424, 572, + /* 760 */ 424, 195, 424, 571, 424, 67, 424, 614, 94, 614, + /* 770 */ 98, 424, 614, 97, 264, 606, 606, 195, 614, 46, + /* 780 */ 614, 96, 614, 30, 614, 49, 614, 115, 614, 114, + /* 790 */ 418, 229, 388, 614, 113, 306, 89, 90, 80, 600, + /* 800 */ 599, 601, 601, 87, 87, 88, 88, 88, 88, 424, + /* 810 */ 86, 86, 86, 86, 85, 85, 84, 84, 84, 83, + /* 820 */ 330, 119, 424, 590, 110, 372, 606, 606, 195, 53, + /* 830 */ 250, 614, 29, 195, 472, 438, 729, 190, 302, 498, + /* 840 */ 14, 523, 641, 2, 614, 43, 306, 89, 90, 80, + /* 850 */ 600, 599, 601, 601, 87, 87, 88, 88, 88, 88, + /* 860 */ 424, 86, 86, 86, 86, 85, 85, 84, 84, 84, + /* 870 */ 83, 330, 424, 613, 964, 964, 354, 606, 606, 420, + /* 880 */ 312, 64, 614, 42, 391, 355, 283, 437, 301, 255, + /* 890 */ 414, 410, 495, 492, 614, 28, 471, 306, 89, 90, + /* 900 */ 80, 600, 599, 601, 601, 87, 87, 88, 88, 88, + /* 910 */ 88, 424, 86, 86, 86, 86, 85, 85, 84, 84, + /* 920 */ 84, 83, 330, 424, 110, 110, 110, 110, 606, 606, + /* 930 */ 110, 254, 13, 614, 41, 532, 531, 283, 481, 531, + /* 940 */ 457, 284, 119, 561, 356, 614, 40, 284, 306, 89, + /* 950 */ 78, 80, 600, 599, 601, 601, 87, 87, 88, 88, + /* 960 */ 88, 88, 424, 86, 86, 86, 86, 85, 85, 84, + /* 970 */ 84, 84, 83, 330, 110, 424, 341, 220, 555, 606, + /* 980 */ 606, 351, 555, 318, 614, 95, 413, 255, 83, 330, + /* 990 */ 284, 284, 255, 640, 333, 356, 255, 614, 39, 306, + /* 1000 */ 356, 90, 80, 600, 599, 601, 601, 87, 87, 88, + /* 1010 */ 88, 88, 88, 424, 86, 86, 86, 86, 85, 85, + /* 1020 */ 84, 84, 84, 83, 330, 424, 317, 316, 141, 465, + /* 1030 */ 606, 606, 219, 619, 463, 614, 10, 417, 462, 255, + /* 1040 */ 189, 510, 553, 351, 207, 363, 161, 614, 38, 315, + /* 1050 */ 218, 255, 255, 80, 600, 599, 601, 601, 87, 87, + /* 1060 */ 88, 88, 88, 88, 424, 86, 86, 86, 86, 85, + /* 1070 */ 85, 84, 84, 84, 83, 330, 76, 419, 255, 3, + /* 1080 */ 878, 461, 424, 247, 331, 331, 614, 37, 217, 76, + /* 1090 */ 419, 390, 3, 216, 215, 422, 4, 331, 331, 424, + /* 1100 */ 547, 12, 424, 545, 614, 36, 424, 541, 422, 424, + /* 1110 */ 540, 424, 214, 424, 408, 424, 539, 403, 605, 605, + /* 1120 */ 237, 614, 25, 119, 614, 24, 588, 408, 614, 45, + /* 1130 */ 118, 614, 35, 614, 34, 614, 33, 614, 23, 588, + /* 1140 */ 60, 223, 603, 602, 513, 378, 73, 74, 140, 139, + /* 1150 */ 424, 110, 265, 75, 426, 425, 59, 424, 610, 73, + /* 1160 */ 74, 549, 402, 404, 424, 373, 75, 426, 425, 604, + /* 1170 */ 138, 610, 614, 11, 392, 76, 419, 181, 3, 614, + /* 1180 */ 32, 271, 369, 331, 331, 493, 614, 31, 149, 608, + /* 1190 */ 608, 608, 607, 15, 422, 365, 614, 8, 137, 489, + /* 1200 */ 136, 190, 608, 608, 608, 607, 15, 485, 176, 135, + /* 1210 */ 7, 252, 477, 408, 174, 133, 175, 474, 57, 56, + /* 1220 */ 132, 130, 119, 76, 419, 588, 3, 468, 245, 464, + /* 1230 */ 171, 331, 331, 125, 123, 456, 447, 122, 446, 104, + /* 1240 */ 336, 231, 422, 166, 154, 73, 74, 332, 116, 431, + /* 1250 */ 121, 309, 75, 426, 425, 222, 106, 610, 308, 637, + /* 1260 */ 204, 408, 629, 627, 628, 6, 200, 428, 427, 290, + /* 1270 */ 203, 622, 201, 588, 62, 63, 289, 66, 419, 399, + /* 1280 */ 3, 401, 288, 92, 143, 331, 331, 287, 608, 608, + /* 1290 */ 608, 607, 15, 73, 74, 227, 422, 325, 69, 416, + /* 1300 */ 75, 426, 425, 612, 412, 610, 192, 61, 569, 209, + /* 1310 */ 396, 226, 278, 225, 383, 408, 527, 558, 276, 533, + /* 1320 */ 552, 528, 321, 523, 370, 508, 180, 588, 494, 179, + /* 1330 */ 366, 117, 253, 269, 522, 503, 608, 608, 608, 607, + /* 1340 */ 15, 551, 502, 58, 274, 524, 178, 73, 74, 304, + /* 1350 */ 501, 368, 303, 206, 75, 426, 425, 491, 360, 610, + /* 1360 */ 213, 177, 483, 131, 345, 298, 297, 296, 202, 294, + /* 1370 */ 480, 490, 466, 134, 172, 129, 444, 346, 470, 128, + /* 1380 */ 314, 459, 103, 127, 126, 148, 124, 167, 443, 235, + /* 1390 */ 608, 608, 608, 607, 15, 442, 439, 623, 234, 299, + /* 1400 */ 145, 583, 291, 377, 581, 160, 119, 156, 270, 636, + /* 1410 */ 971, 169, 279, 626, 520, 625, 473, 624, 170, 621, + /* 1420 */ 618, 119, 168, 55, 409, 423, 537, 609, 286, 285, + /* 1430 */ 405, 570, 560, 556, 5, 52, 458, 554, 147, 267, + /* 1440 */ 519, 504, 518, 406, 262, 239, 260, 512, 343, 511, + /* 1450 */ 258, 353, 565, 256, 224, 251, 359, 277, 275, 476, + /* 1460 */ 475, 246, 352, 244, 467, 455, 236, 233, 232, 307, + /* 1470 */ 441, 281, 205, 163, 397, 280, 535, 505, 330, 617, + /* 1480 */ 971, 971, 971, 971, 367, 971, 971, 971, 971, 971, + /* 1490 */ 971, 971, 971, 971, 971, 971, 338, +}; +static const YYCODETYPE yy_lookahead[] = { + /* 0 */ 19, 22, 22, 23, 1, 24, 26, 15, 27, 80, + /* 10 */ 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, + /* 20 */ 91, 92, 93, 94, 95, 108, 109, 110, 27, 28, + /* 30 */ 23, 50, 51, 80, 81, 82, 83, 122, 85, 86, + /* 40 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 22, + /* 50 */ 70, 23, 71, 72, 73, 74, 75, 76, 77, 78, + /* 60 */ 79, 80, 81, 82, 83, 122, 85, 86, 87, 88, + /* 70 */ 89, 90, 91, 92, 93, 94, 95, 19, 97, 91, + /* 80 */ 92, 93, 94, 95, 26, 85, 86, 87, 88, 89, + /* 90 */ 90, 91, 92, 93, 94, 95, 27, 28, 97, 98, + /* 100 */ 99, 122, 211, 102, 103, 104, 79, 19, 50, 51, + /* 110 */ 19, 122, 59, 55, 113, 224, 225, 226, 89, 90, + /* 120 */ 91, 92, 93, 94, 95, 23, 27, 28, 26, 71, + /* 130 */ 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, + /* 140 */ 82, 83, 51, 85, 86, 87, 88, 89, 90, 91, + /* 150 */ 92, 93, 94, 95, 19, 132, 133, 58, 89, 90, + /* 160 */ 21, 108, 109, 110, 27, 28, 97, 98, 33, 100, + /* 170 */ 7, 8, 119, 120, 22, 19, 107, 42, 109, 27, + /* 180 */ 28, 27, 28, 95, 28, 50, 51, 99, 100, 101, + /* 190 */ 102, 103, 104, 105, 27, 28, 97, 98, 107, 152, + /* 200 */ 112, 132, 133, 112, 65, 69, 71, 72, 73, 74, + /* 210 */ 75, 76, 77, 78, 79, 80, 81, 82, 83, 11, + /* 220 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + /* 230 */ 95, 19, 101, 97, 97, 98, 24, 101, 122, 157, + /* 240 */ 12, 99, 103, 112, 102, 103, 104, 152, 22, 97, + /* 250 */ 98, 97, 98, 27, 28, 113, 27, 29, 91, 164, + /* 260 */ 165, 124, 50, 51, 97, 98, 219, 59, 132, 133, + /* 270 */ 134, 22, 23, 45, 66, 47, 212, 213, 124, 140, + /* 280 */ 132, 133, 19, 71, 72, 73, 74, 75, 76, 77, + /* 290 */ 78, 79, 80, 81, 82, 83, 152, 85, 86, 87, + /* 300 */ 88, 89, 90, 91, 92, 93, 94, 95, 164, 165, + /* 310 */ 27, 28, 230, 50, 51, 233, 108, 109, 110, 70, + /* 320 */ 16, 59, 23, 97, 98, 26, 97, 22, 66, 185, + /* 330 */ 12, 187, 27, 28, 71, 72, 73, 74, 75, 76, + /* 340 */ 77, 78, 79, 80, 81, 82, 83, 29, 85, 86, + /* 350 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 19, + /* 360 */ 22, 148, 149, 45, 23, 47, 62, 154, 64, 156, + /* 370 */ 108, 109, 110, 37, 69, 23, 163, 59, 26, 26, + /* 380 */ 97, 98, 144, 145, 146, 147, 152, 200, 52, 23, + /* 390 */ 50, 51, 26, 22, 89, 90, 60, 210, 7, 8, + /* 400 */ 9, 138, 97, 22, 23, 26, 101, 26, 174, 175, + /* 410 */ 197, 71, 72, 73, 74, 75, 76, 77, 78, 79, + /* 420 */ 80, 81, 82, 83, 16, 85, 86, 87, 88, 89, + /* 430 */ 90, 91, 92, 93, 94, 95, 19, 132, 133, 134, + /* 440 */ 23, 152, 208, 209, 140, 152, 152, 111, 195, 196, + /* 450 */ 98, 70, 163, 160, 152, 23, 22, 164, 165, 246, + /* 460 */ 207, 27, 152, 174, 175, 171, 172, 50, 51, 137, + /* 470 */ 62, 139, 64, 171, 172, 222, 124, 27, 138, 24, + /* 480 */ 163, 89, 90, 130, 174, 175, 197, 163, 71, 72, + /* 490 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, + /* 500 */ 83, 22, 85, 86, 87, 88, 89, 90, 91, 92, + /* 510 */ 93, 94, 95, 19, 197, 181, 182, 23, 208, 209, + /* 520 */ 152, 197, 26, 189, 132, 133, 232, 224, 225, 226, + /* 530 */ 152, 97, 91, 26, 232, 116, 212, 213, 152, 222, + /* 540 */ 121, 152, 174, 175, 50, 51, 243, 97, 22, 23, + /* 550 */ 22, 234, 174, 175, 177, 23, 239, 116, 163, 177, + /* 560 */ 174, 175, 121, 174, 175, 71, 72, 73, 74, 75, + /* 570 */ 76, 77, 78, 79, 80, 81, 82, 83, 24, 85, + /* 580 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + /* 590 */ 19, 23, 197, 11, 23, 227, 70, 208, 220, 152, + /* 600 */ 31, 224, 225, 226, 35, 98, 224, 225, 226, 108, + /* 610 */ 109, 110, 115, 152, 117, 118, 27, 222, 49, 123, + /* 620 */ 24, 50, 51, 27, 0, 1, 2, 224, 225, 226, + /* 630 */ 166, 124, 168, 169, 239, 174, 175, 170, 171, 172, + /* 640 */ 22, 194, 71, 72, 73, 74, 75, 76, 77, 78, + /* 650 */ 79, 80, 81, 82, 83, 152, 85, 86, 87, 88, + /* 660 */ 89, 90, 91, 92, 93, 94, 95, 19, 22, 208, + /* 670 */ 24, 23, 195, 196, 170, 171, 172, 174, 175, 152, + /* 680 */ 26, 152, 152, 152, 207, 152, 97, 152, 23, 152, + /* 690 */ 51, 244, 152, 97, 152, 247, 248, 23, 50, 51, + /* 700 */ 26, 174, 175, 174, 175, 174, 175, 174, 175, 174, + /* 710 */ 175, 174, 175, 23, 174, 175, 174, 175, 188, 71, + /* 720 */ 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, + /* 730 */ 82, 83, 152, 85, 86, 87, 88, 89, 90, 91, + /* 740 */ 92, 93, 94, 95, 19, 152, 107, 152, 33, 24, + /* 750 */ 152, 100, 101, 27, 174, 175, 152, 42, 152, 23, + /* 760 */ 152, 26, 152, 23, 152, 26, 152, 174, 175, 174, + /* 770 */ 175, 152, 174, 175, 23, 50, 51, 26, 174, 175, + /* 780 */ 174, 175, 174, 175, 174, 175, 174, 175, 174, 175, + /* 790 */ 163, 119, 120, 174, 175, 19, 71, 72, 73, 74, + /* 800 */ 75, 76, 77, 78, 79, 80, 81, 82, 83, 152, + /* 810 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + /* 820 */ 95, 66, 152, 97, 197, 23, 50, 51, 26, 53, + /* 830 */ 23, 174, 175, 26, 23, 23, 23, 26, 26, 26, + /* 840 */ 36, 106, 146, 147, 174, 175, 19, 71, 72, 73, + /* 850 */ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + /* 860 */ 152, 85, 86, 87, 88, 89, 90, 91, 92, 93, + /* 870 */ 94, 95, 152, 196, 119, 120, 19, 50, 51, 168, + /* 880 */ 169, 26, 174, 175, 207, 28, 152, 249, 250, 152, + /* 890 */ 163, 163, 163, 163, 174, 175, 163, 19, 71, 72, + /* 900 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, + /* 910 */ 83, 152, 85, 86, 87, 88, 89, 90, 91, 92, + /* 920 */ 93, 94, 95, 152, 197, 197, 197, 197, 50, 51, + /* 930 */ 197, 194, 36, 174, 175, 191, 192, 152, 191, 192, + /* 940 */ 163, 152, 66, 124, 152, 174, 175, 152, 19, 71, + /* 950 */ 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, + /* 960 */ 82, 83, 152, 85, 86, 87, 88, 89, 90, 91, + /* 970 */ 92, 93, 94, 95, 197, 152, 100, 188, 152, 50, + /* 980 */ 51, 152, 152, 188, 174, 175, 252, 152, 94, 95, + /* 990 */ 152, 152, 152, 1, 2, 152, 152, 174, 175, 19, + /* 1000 */ 152, 72, 73, 74, 75, 76, 77, 78, 79, 80, + /* 1010 */ 81, 82, 83, 152, 85, 86, 87, 88, 89, 90, + /* 1020 */ 91, 92, 93, 94, 95, 152, 188, 188, 22, 194, + /* 1030 */ 50, 51, 240, 173, 194, 174, 175, 252, 194, 152, + /* 1040 */ 36, 181, 28, 152, 23, 219, 122, 174, 175, 219, + /* 1050 */ 221, 152, 152, 73, 74, 75, 76, 77, 78, 79, + /* 1060 */ 80, 81, 82, 83, 152, 85, 86, 87, 88, 89, + /* 1070 */ 90, 91, 92, 93, 94, 95, 19, 20, 152, 22, + /* 1080 */ 23, 194, 152, 240, 27, 28, 174, 175, 240, 19, + /* 1090 */ 20, 26, 22, 194, 194, 38, 22, 27, 28, 152, + /* 1100 */ 23, 22, 152, 116, 174, 175, 152, 23, 38, 152, + /* 1110 */ 23, 152, 221, 152, 57, 152, 23, 163, 50, 51, + /* 1120 */ 194, 174, 175, 66, 174, 175, 69, 57, 174, 175, + /* 1130 */ 40, 174, 175, 174, 175, 174, 175, 174, 175, 69, + /* 1140 */ 22, 53, 74, 75, 30, 53, 89, 90, 22, 22, + /* 1150 */ 152, 197, 23, 96, 97, 98, 22, 152, 101, 89, + /* 1160 */ 90, 91, 208, 209, 152, 53, 96, 97, 98, 101, + /* 1170 */ 22, 101, 174, 175, 152, 19, 20, 105, 22, 174, + /* 1180 */ 175, 112, 19, 27, 28, 20, 174, 175, 24, 132, + /* 1190 */ 133, 134, 135, 136, 38, 44, 174, 175, 107, 61, + /* 1200 */ 54, 26, 132, 133, 134, 135, 136, 54, 107, 22, + /* 1210 */ 5, 140, 1, 57, 36, 111, 122, 28, 79, 79, + /* 1220 */ 131, 123, 66, 19, 20, 69, 22, 1, 16, 20, + /* 1230 */ 125, 27, 28, 123, 111, 120, 23, 131, 23, 16, + /* 1240 */ 68, 142, 38, 15, 22, 89, 90, 3, 167, 4, + /* 1250 */ 248, 251, 96, 97, 98, 180, 180, 101, 251, 151, + /* 1260 */ 6, 57, 151, 13, 151, 26, 25, 151, 161, 202, + /* 1270 */ 153, 162, 153, 69, 130, 128, 203, 19, 20, 127, + /* 1280 */ 22, 126, 204, 129, 22, 27, 28, 205, 132, 133, + /* 1290 */ 134, 135, 136, 89, 90, 231, 38, 95, 137, 179, + /* 1300 */ 96, 97, 98, 206, 179, 101, 122, 107, 159, 159, + /* 1310 */ 125, 231, 216, 228, 107, 57, 184, 217, 216, 176, + /* 1320 */ 217, 176, 48, 106, 18, 184, 158, 69, 159, 158, + /* 1330 */ 46, 71, 237, 176, 176, 176, 132, 133, 134, 135, + /* 1340 */ 136, 217, 176, 137, 216, 178, 158, 89, 90, 179, + /* 1350 */ 176, 159, 179, 159, 96, 97, 98, 159, 159, 101, + /* 1360 */ 5, 158, 202, 22, 18, 10, 11, 12, 13, 14, + /* 1370 */ 190, 238, 17, 190, 158, 193, 41, 159, 202, 193, + /* 1380 */ 159, 202, 245, 193, 193, 223, 190, 32, 159, 34, + /* 1390 */ 132, 133, 134, 135, 136, 159, 39, 155, 43, 150, + /* 1400 */ 223, 177, 201, 178, 177, 186, 66, 199, 177, 152, + /* 1410 */ 253, 56, 215, 152, 182, 152, 202, 152, 63, 152, + /* 1420 */ 152, 66, 67, 242, 229, 152, 174, 152, 152, 152, + /* 1430 */ 152, 152, 152, 152, 199, 242, 202, 152, 198, 152, + /* 1440 */ 152, 152, 183, 192, 152, 215, 152, 183, 215, 183, + /* 1450 */ 152, 241, 214, 152, 211, 152, 152, 211, 211, 152, + /* 1460 */ 152, 241, 152, 152, 152, 152, 152, 152, 152, 114, + /* 1470 */ 152, 152, 235, 152, 152, 152, 174, 187, 95, 174, + /* 1480 */ 253, 253, 253, 253, 236, 253, 253, 253, 253, 253, + /* 1490 */ 253, 253, 253, 253, 253, 253, 141, +}; +#define YY_SHIFT_USE_DFLT (-86) +#define YY_SHIFT_COUNT (429) +#define YY_SHIFT_MIN (-85) +#define YY_SHIFT_MAX (1383) +static const short yy_shift_ofst[] = { + /* 0 */ 992, 1057, 1355, 1156, 1204, 1204, 1, 262, -19, 135, + /* 10 */ 135, 776, 1204, 1204, 1204, 1204, 69, 69, 53, 208, + /* 20 */ 283, 755, 58, 725, 648, 571, 494, 417, 340, 263, + /* 30 */ 212, 827, 827, 827, 827, 827, 827, 827, 827, 827, + /* 40 */ 827, 827, 827, 827, 827, 827, 878, 827, 929, 980, + /* 50 */ 980, 1070, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, + /* 60 */ 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, + /* 70 */ 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, + /* 80 */ 1258, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, + /* 90 */ 1204, 1204, 1204, 1204, -71, -47, -47, -47, -47, -47, + /* 100 */ 0, 29, -12, 283, 283, 139, 91, 392, 392, 894, + /* 110 */ 672, 726, 1383, -86, -86, -86, 88, 318, 318, 99, + /* 120 */ 381, -20, 283, 283, 283, 283, 283, 283, 283, 283, + /* 130 */ 283, 283, 283, 283, 283, 283, 283, 283, 283, 283, + /* 140 */ 283, 283, 283, 283, 624, 876, 726, 672, 1340, 1340, + /* 150 */ 1340, 1340, 1340, 1340, -86, -86, -86, 305, 136, 136, + /* 160 */ 142, 167, 226, 154, 137, 152, 283, 283, 283, 283, + /* 170 */ 283, 283, 283, 283, 283, 283, 283, 283, 283, 283, + /* 180 */ 283, 283, 283, 336, 336, 336, 283, 283, 352, 283, + /* 190 */ 283, 283, 283, 283, 228, 283, 283, 283, 283, 283, + /* 200 */ 283, 283, 283, 283, 283, 501, 569, 596, 596, 596, + /* 210 */ 507, 497, 441, 391, 353, 156, 156, 857, 353, 857, + /* 220 */ 735, 813, 639, 715, 156, 332, 715, 715, 496, 419, + /* 230 */ 646, 1357, 1184, 1184, 1335, 1335, 1184, 1341, 1260, 1144, + /* 240 */ 1346, 1346, 1346, 1346, 1184, 1306, 1144, 1341, 1260, 1260, + /* 250 */ 1144, 1184, 1306, 1206, 1284, 1184, 1184, 1306, 1184, 1306, + /* 260 */ 1184, 1306, 1262, 1207, 1207, 1207, 1274, 1262, 1207, 1217, + /* 270 */ 1207, 1274, 1207, 1207, 1185, 1200, 1185, 1200, 1185, 1200, + /* 280 */ 1184, 1184, 1161, 1262, 1202, 1202, 1262, 1154, 1155, 1147, + /* 290 */ 1152, 1144, 1241, 1239, 1250, 1250, 1254, 1254, 1254, 1254, + /* 300 */ -86, -86, -86, -86, -86, -86, 1068, 304, 526, 249, + /* 310 */ 408, -83, 434, 812, 27, 811, 807, 802, 751, 589, + /* 320 */ 651, 163, 131, 674, 366, 450, 299, 148, 23, 102, + /* 330 */ 229, -21, 1245, 1244, 1222, 1099, 1228, 1172, 1223, 1215, + /* 340 */ 1213, 1115, 1106, 1123, 1110, 1209, 1105, 1212, 1226, 1098, + /* 350 */ 1089, 1140, 1139, 1104, 1189, 1178, 1094, 1211, 1205, 1187, + /* 360 */ 1101, 1071, 1153, 1175, 1146, 1138, 1151, 1091, 1164, 1165, + /* 370 */ 1163, 1069, 1072, 1148, 1112, 1134, 1127, 1129, 1126, 1092, + /* 380 */ 1114, 1118, 1088, 1090, 1093, 1087, 1084, 987, 1079, 1077, + /* 390 */ 1074, 1065, 924, 1021, 1014, 1004, 1006, 819, 739, 896, + /* 400 */ 855, 804, 739, 740, 736, 690, 654, 665, 618, 582, + /* 410 */ 568, 528, 554, 379, 532, 479, 455, 379, 432, 371, + /* 420 */ 341, 28, 338, 116, -11, -57, -85, 7, -8, 3, +}; +#define YY_REDUCE_USE_DFLT (-110) +#define YY_REDUCE_COUNT (305) +#define YY_REDUCE_MIN (-109) +#define YY_REDUCE_MAX (1323) +static const short yy_reduce_ofst[] = { + /* 0 */ 238, 954, 213, 289, 310, 234, 144, 317, -109, 382, + /* 10 */ 377, 303, 461, 389, 378, 368, 302, 294, 253, 395, + /* 20 */ 293, 324, 403, 403, 403, 403, 403, 403, 403, 403, + /* 30 */ 403, 403, 403, 403, 403, 403, 403, 403, 403, 403, + /* 40 */ 403, 403, 403, 403, 403, 403, 403, 403, 403, 403, + /* 50 */ 403, 1022, 1012, 1005, 998, 963, 961, 959, 957, 950, + /* 60 */ 947, 930, 912, 873, 861, 823, 810, 771, 759, 720, + /* 70 */ 708, 670, 657, 619, 614, 612, 610, 608, 606, 604, + /* 80 */ 598, 595, 593, 580, 542, 540, 537, 535, 533, 531, + /* 90 */ 529, 527, 503, 386, 403, 403, 403, 403, 403, 403, + /* 100 */ 403, 403, 403, 95, 447, 82, 334, 504, 467, 403, + /* 110 */ 477, 464, 403, 403, 403, 403, 860, 747, 744, 785, + /* 120 */ 638, 638, 926, 891, 900, 899, 887, 844, 840, 835, + /* 130 */ 848, 830, 843, 829, 792, 839, 826, 737, 838, 795, + /* 140 */ 789, 47, 734, 530, 696, 777, 711, 677, 733, 730, + /* 150 */ 729, 728, 727, 627, 448, 64, 187, 1305, 1302, 1252, + /* 160 */ 1290, 1273, 1323, 1322, 1321, 1319, 1318, 1316, 1315, 1314, + /* 170 */ 1313, 1312, 1311, 1310, 1308, 1307, 1304, 1303, 1301, 1298, + /* 180 */ 1294, 1292, 1289, 1266, 1264, 1259, 1288, 1287, 1238, 1285, + /* 190 */ 1281, 1280, 1279, 1278, 1251, 1277, 1276, 1275, 1273, 1268, + /* 200 */ 1267, 1265, 1263, 1261, 1257, 1248, 1237, 1247, 1246, 1243, + /* 210 */ 1238, 1240, 1235, 1249, 1234, 1233, 1230, 1220, 1214, 1210, + /* 220 */ 1225, 1219, 1232, 1231, 1197, 1195, 1227, 1224, 1201, 1208, + /* 230 */ 1242, 1137, 1236, 1229, 1193, 1181, 1221, 1177, 1196, 1179, + /* 240 */ 1191, 1190, 1186, 1182, 1218, 1216, 1176, 1162, 1183, 1180, + /* 250 */ 1160, 1199, 1203, 1133, 1095, 1198, 1194, 1188, 1192, 1171, + /* 260 */ 1169, 1168, 1173, 1174, 1166, 1159, 1141, 1170, 1158, 1167, + /* 270 */ 1157, 1132, 1145, 1143, 1124, 1128, 1103, 1102, 1100, 1096, + /* 280 */ 1150, 1149, 1085, 1125, 1080, 1064, 1120, 1097, 1082, 1078, + /* 290 */ 1073, 1067, 1109, 1107, 1119, 1117, 1116, 1113, 1111, 1108, + /* 300 */ 1007, 1000, 1002, 1076, 1075, 1081, +}; +static const YYACTIONTYPE yy_default[] = { + /* 0 */ 647, 964, 964, 964, 878, 878, 969, 964, 774, 802, + /* 10 */ 802, 938, 969, 969, 969, 876, 969, 969, 969, 964, + /* 20 */ 969, 778, 808, 969, 969, 969, 969, 969, 969, 969, + /* 30 */ 969, 937, 939, 816, 815, 918, 789, 813, 806, 810, + /* 40 */ 879, 872, 873, 871, 875, 880, 969, 809, 841, 856, + /* 50 */ 840, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 60 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 70 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 80 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 90 */ 969, 969, 969, 969, 850, 855, 862, 854, 851, 843, + /* 100 */ 842, 844, 845, 969, 969, 673, 739, 969, 969, 846, + /* 110 */ 969, 685, 847, 859, 858, 857, 680, 969, 969, 969, + /* 120 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 130 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 140 */ 969, 969, 969, 969, 647, 964, 969, 969, 964, 964, + /* 150 */ 964, 964, 964, 964, 956, 778, 768, 969, 969, 969, + /* 160 */ 969, 969, 969, 969, 969, 969, 969, 944, 942, 969, + /* 170 */ 891, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 180 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 190 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 200 */ 969, 969, 969, 969, 653, 969, 911, 774, 774, 774, + /* 210 */ 776, 754, 766, 655, 812, 791, 791, 923, 812, 923, + /* 220 */ 710, 733, 707, 802, 791, 874, 802, 802, 775, 766, + /* 230 */ 969, 949, 782, 782, 941, 941, 782, 821, 743, 812, + /* 240 */ 750, 750, 750, 750, 782, 670, 812, 821, 743, 743, + /* 250 */ 812, 782, 670, 917, 915, 782, 782, 670, 782, 670, + /* 260 */ 782, 670, 884, 741, 741, 741, 725, 884, 741, 710, + /* 270 */ 741, 725, 741, 741, 795, 790, 795, 790, 795, 790, + /* 280 */ 782, 782, 969, 884, 888, 888, 884, 807, 796, 805, + /* 290 */ 803, 812, 676, 728, 663, 663, 652, 652, 652, 652, + /* 300 */ 961, 961, 956, 712, 712, 695, 969, 969, 969, 969, + /* 310 */ 969, 969, 687, 969, 893, 969, 969, 969, 969, 969, + /* 320 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 330 */ 969, 828, 969, 648, 951, 969, 969, 948, 969, 969, + /* 340 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 350 */ 969, 969, 969, 969, 969, 969, 921, 969, 969, 969, + /* 360 */ 969, 969, 969, 914, 913, 969, 969, 969, 969, 969, + /* 370 */ 969, 969, 969, 969, 969, 969, 969, 969, 969, 969, + /* 380 */ 969, 969, 969, 969, 969, 969, 969, 757, 969, 969, + /* 390 */ 969, 761, 969, 969, 969, 969, 969, 969, 804, 969, + /* 400 */ 797, 969, 877, 969, 969, 969, 969, 969, 969, 969, + /* 410 */ 969, 969, 969, 966, 969, 969, 969, 965, 969, 969, + /* 420 */ 969, 969, 969, 830, 969, 829, 833, 969, 661, 969, + /* 430 */ 644, 649, 960, 963, 962, 959, 958, 957, 952, 950, + /* 440 */ 947, 946, 945, 943, 940, 936, 897, 895, 902, 901, + /* 450 */ 900, 899, 898, 896, 894, 892, 818, 817, 814, 811, + /* 460 */ 753, 935, 890, 752, 749, 748, 669, 953, 920, 929, + /* 470 */ 928, 927, 822, 926, 925, 924, 922, 919, 906, 820, + /* 480 */ 819, 744, 882, 881, 672, 910, 909, 908, 912, 916, + /* 490 */ 907, 784, 751, 671, 668, 675, 679, 731, 732, 740, + /* 500 */ 738, 737, 736, 735, 734, 730, 681, 686, 724, 709, + /* 510 */ 708, 717, 716, 722, 721, 720, 719, 718, 715, 714, + /* 520 */ 713, 706, 705, 711, 704, 727, 726, 723, 703, 747, + /* 530 */ 746, 745, 742, 702, 701, 700, 833, 699, 698, 838, + /* 540 */ 837, 866, 826, 755, 759, 758, 762, 763, 771, 770, + /* 550 */ 769, 780, 781, 793, 792, 824, 823, 794, 779, 773, + /* 560 */ 772, 788, 787, 786, 785, 777, 767, 799, 798, 868, + /* 570 */ 783, 867, 865, 934, 933, 932, 931, 930, 870, 967, + /* 580 */ 968, 887, 889, 886, 801, 800, 885, 869, 839, 836, + /* 590 */ 690, 691, 905, 904, 903, 693, 692, 689, 688, 863, + /* 600 */ 860, 852, 864, 861, 853, 849, 848, 834, 832, 831, + /* 610 */ 827, 835, 760, 756, 825, 765, 764, 697, 696, 694, + /* 620 */ 678, 677, 674, 667, 665, 664, 666, 662, 660, 659, + /* 630 */ 658, 657, 656, 684, 683, 682, 654, 651, 650, 646, + /* 640 */ 645, 643, +}; - /* Count the number of additional columns needed to create a - ** covering index. A "covering index" is an index that contains all - ** columns that are needed by the query. With a covering index, the - ** original table never needs to be accessed. Automatic indices must - ** be a covering index because the index will not be updated if the - ** original table changes and the index and table cannot both be used - ** if they go out of sync. - */ - extraCols = pSrc->colUsed & (~idxCols | (((Bitmask)1)<<(BMS-1))); - mxBitCol = (pTable->nCol >= BMS-1) ? BMS-1 : pTable->nCol; - testcase( pTable->nCol==BMS-1 ); - testcase( pTable->nCol==BMS-2 ); - for(i=0; icolUsed & (((Bitmask)1)<<(BMS-1)) ){ - nColumn += pTable->nCol - BMS + 1; - } - pLevel->plan.wsFlags |= WHERE_COLUMN_EQ | WHERE_IDX_ONLY | WO_EQ; +/* The next table maps tokens into fallback tokens. If a construct +** like the following: +** +** %fallback ID X Y Z. +** +** appears in the grammar, then ID becomes a fallback token for X, Y, +** and Z. Whenever one of the tokens X, Y, or Z is input to the parser +** but it does not parse, the type of the token is changed to ID and +** the parse is retried before an error is thrown. +*/ +#ifdef YYFALLBACK +static const YYCODETYPE yyFallback[] = { + 0, /* $ => nothing */ + 0, /* SEMI => nothing */ + 27, /* EXPLAIN => ID */ + 27, /* QUERY => ID */ + 27, /* PLAN => ID */ + 27, /* BEGIN => ID */ + 0, /* TRANSACTION => nothing */ + 27, /* DEFERRED => ID */ + 27, /* IMMEDIATE => ID */ + 27, /* EXCLUSIVE => ID */ + 0, /* COMMIT => nothing */ + 27, /* END => ID */ + 27, /* ROLLBACK => ID */ + 27, /* SAVEPOINT => ID */ + 27, /* RELEASE => ID */ + 0, /* TO => nothing */ + 0, /* TABLE => nothing */ + 0, /* CREATE => nothing */ + 27, /* IF => ID */ + 0, /* NOT => nothing */ + 0, /* EXISTS => nothing */ + 27, /* TEMP => ID */ + 0, /* LP => nothing */ + 0, /* RP => nothing */ + 0, /* AS => nothing */ + 27, /* WITHOUT => ID */ + 0, /* COMMA => nothing */ + 0, /* ID => nothing */ + 0, /* INDEXED => nothing */ + 27, /* ABORT => ID */ + 27, /* ACTION => ID */ + 27, /* AFTER => ID */ + 27, /* ANALYZE => ID */ + 27, /* ASC => ID */ + 27, /* ATTACH => ID */ + 27, /* BEFORE => ID */ + 27, /* BY => ID */ + 27, /* CASCADE => ID */ + 27, /* CAST => ID */ + 27, /* COLUMNKW => ID */ + 27, /* CONFLICT => ID */ + 27, /* DATABASE => ID */ + 27, /* DESC => ID */ + 27, /* DETACH => ID */ + 27, /* EACH => ID */ + 27, /* FAIL => ID */ + 27, /* FOR => ID */ + 27, /* IGNORE => ID */ + 27, /* INITIALLY => ID */ + 27, /* INSTEAD => ID */ + 27, /* LIKE_KW => ID */ + 27, /* MATCH => ID */ + 27, /* NO => ID */ + 27, /* KEY => ID */ + 27, /* OF => ID */ + 27, /* OFFSET => ID */ + 27, /* PRAGMA => ID */ + 27, /* RAISE => ID */ + 27, /* RECURSIVE => ID */ + 27, /* REPLACE => ID */ + 27, /* RESTRICT => ID */ + 27, /* ROW => ID */ + 27, /* TRIGGER => ID */ + 27, /* VACUUM => ID */ + 27, /* VIEW => ID */ + 27, /* VIRTUAL => ID */ + 27, /* WITH => ID */ + 27, /* REINDEX => ID */ + 27, /* RENAME => ID */ + 27, /* CTIME_KW => ID */ +}; +#endif /* YYFALLBACK */ - /* Construct the Index object to describe this index */ - nByte = sizeof(Index); - nByte += nColumn*sizeof(int); /* Index.aiColumn */ - nByte += nColumn*sizeof(char*); /* Index.azColl */ - nByte += nColumn; /* Index.aSortOrder */ - pIdx = sqlite3DbMallocZero(pParse->db, nByte); - if( pIdx==0 ) return; - pLevel->plan.u.pIdx = pIdx; - pIdx->azColl = (char**)&pIdx[1]; - pIdx->aiColumn = (int*)&pIdx->azColl[nColumn]; - pIdx->aSortOrder = (u8*)&pIdx->aiColumn[nColumn]; - pIdx->zName = "auto-index"; - pIdx->nColumn = nColumn; - pIdx->pTable = pTable; - n = 0; - idxCols = 0; - for(pTerm=pWC->a; pTermu.leftColumn; - Bitmask cMask = iCol>=BMS ? ((Bitmask)1)<<(BMS-1) : ((Bitmask)1)<pExpr; - idxCols |= cMask; - pIdx->aiColumn[n] = pTerm->u.leftColumn; - pColl = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pX->pRight); - pIdx->azColl[n] = ALWAYS(pColl) ? pColl->zName : "BINARY"; - n++; - } - } - } - assert( (u32)n==pLevel->plan.nEq ); +/* The following structure represents a single element of the +** parser's stack. Information stored includes: +** +** + The state number for the parser at this level of the stack. +** +** + The value of the token stored at this level of the stack. +** (In other words, the "major" token.) +** +** + The semantic value stored at this level of the stack. This is +** the information used by the action routines in the grammar. +** It is sometimes called the "minor" token. +*/ +struct yyStackEntry { + YYACTIONTYPE stateno; /* The state-number */ + YYCODETYPE major; /* The major token value. This is the code + ** number for the token at this stack level */ + YYMINORTYPE minor; /* The user-supplied minor token value. This + ** is the value of the token */ +}; +typedef struct yyStackEntry yyStackEntry; - /* Add additional columns needed to make the automatic index into - ** a covering index */ - for(i=0; iaiColumn[n] = i; - pIdx->azColl[n] = "BINARY"; - n++; - } - } - if( pSrc->colUsed & (((Bitmask)1)<<(BMS-1)) ){ - for(i=BMS-1; inCol; i++){ - pIdx->aiColumn[n] = i; - pIdx->azColl[n] = "BINARY"; - n++; - } - } - assert( n==nColumn ); +/* The state of the parser is completely contained in an instance of +** the following structure */ +struct yyParser { + int yyidx; /* Index of top element in stack */ +#ifdef YYTRACKMAXSTACKDEPTH + int yyidxMax; /* Maximum value of yyidx */ +#endif + int yyerrcnt; /* Shifts left before out of the error */ + sqlite3ParserARG_SDECL /* A place to hold %extra_argument */ +#if YYSTACKDEPTH<=0 + int yystksz; /* Current side of the stack */ + yyStackEntry *yystack; /* The parser's stack */ +#else + yyStackEntry yystack[YYSTACKDEPTH]; /* The parser's stack */ +#endif +}; +typedef struct yyParser yyParser; - /* Create the automatic index */ - pKeyinfo = sqlite3IndexKeyinfo(pParse, pIdx); - assert( pLevel->iIdxCur>=0 ); - sqlite3VdbeAddOp4(v, OP_OpenAutoindex, pLevel->iIdxCur, nColumn+1, 0, - (char*)pKeyinfo, P4_KEYINFO_HANDOFF); - VdbeComment((v, "for %s", pTable->zName)); +#ifndef NDEBUG +/* #include */ +static FILE *yyTraceFILE = 0; +static char *yyTracePrompt = 0; +#endif /* NDEBUG */ - /* Fill the automatic index with content */ - addrTop = sqlite3VdbeAddOp1(v, OP_Rewind, pLevel->iTabCur); - regRecord = sqlite3GetTempReg(pParse); - sqlite3GenerateIndexKey(pParse, pIdx, pLevel->iTabCur, regRecord, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord); - sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); - sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); - sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX); - sqlite3VdbeJumpHere(v, addrTop); - sqlite3ReleaseTempReg(pParse, regRecord); - - /* Jump here when skipping the initialization */ - sqlite3VdbeJumpHere(v, addrInit); +#ifndef NDEBUG +/* +** Turn parser tracing on by giving a stream to which to write the trace +** and a prompt to preface each trace message. Tracing is turned off +** by making either argument NULL +** +** Inputs: +**
    +**
  • A FILE* to which trace output should be written. +** If NULL, then tracing is turned off. +**
  • A prefix string written at the beginning of every +** line of trace output. If NULL, then tracing is +** turned off. +**
+** +** Outputs: +** None. +*/ +SQLITE_PRIVATE void sqlite3ParserTrace(FILE *TraceFILE, char *zTracePrompt){ + yyTraceFILE = TraceFILE; + yyTracePrompt = zTracePrompt; + if( yyTraceFILE==0 ) yyTracePrompt = 0; + else if( yyTracePrompt==0 ) yyTraceFILE = 0; } -#endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ +#endif /* NDEBUG */ -#ifndef SQLITE_OMIT_VIRTUALTABLE -/* -** Allocate and populate an sqlite3_index_info structure. It is the -** responsibility of the caller to eventually release the structure -** by passing the pointer returned by this function to sqlite3_free(). +#ifndef NDEBUG +/* For tracing shifts, the names of all terminals and nonterminals +** are required. The following table supplies these names */ +static const char *const yyTokenName[] = { + "$", "SEMI", "EXPLAIN", "QUERY", + "PLAN", "BEGIN", "TRANSACTION", "DEFERRED", + "IMMEDIATE", "EXCLUSIVE", "COMMIT", "END", + "ROLLBACK", "SAVEPOINT", "RELEASE", "TO", + "TABLE", "CREATE", "IF", "NOT", + "EXISTS", "TEMP", "LP", "RP", + "AS", "WITHOUT", "COMMA", "ID", + "INDEXED", "ABORT", "ACTION", "AFTER", + "ANALYZE", "ASC", "ATTACH", "BEFORE", + "BY", "CASCADE", "CAST", "COLUMNKW", + "CONFLICT", "DATABASE", "DESC", "DETACH", + "EACH", "FAIL", "FOR", "IGNORE", + "INITIALLY", "INSTEAD", "LIKE_KW", "MATCH", + "NO", "KEY", "OF", "OFFSET", + "PRAGMA", "RAISE", "RECURSIVE", "REPLACE", + "RESTRICT", "ROW", "TRIGGER", "VACUUM", + "VIEW", "VIRTUAL", "WITH", "REINDEX", + "RENAME", "CTIME_KW", "ANY", "OR", + "AND", "IS", "BETWEEN", "IN", + "ISNULL", "NOTNULL", "NE", "EQ", + "GT", "LE", "LT", "GE", + "ESCAPE", "BITAND", "BITOR", "LSHIFT", + "RSHIFT", "PLUS", "MINUS", "STAR", + "SLASH", "REM", "CONCAT", "COLLATE", + "BITNOT", "STRING", "JOIN_KW", "CONSTRAINT", + "DEFAULT", "NULL", "PRIMARY", "UNIQUE", + "CHECK", "REFERENCES", "AUTOINCR", "ON", + "INSERT", "DELETE", "UPDATE", "SET", + "DEFERRABLE", "FOREIGN", "DROP", "UNION", + "ALL", "EXCEPT", "INTERSECT", "SELECT", + "VALUES", "DISTINCT", "DOT", "FROM", + "JOIN", "USING", "ORDER", "GROUP", + "HAVING", "LIMIT", "WHERE", "INTO", + "INTEGER", "FLOAT", "BLOB", "VARIABLE", + "CASE", "WHEN", "THEN", "ELSE", + "INDEX", "ALTER", "ADD", "error", + "input", "cmdlist", "ecmd", "explain", + "cmdx", "cmd", "transtype", "trans_opt", + "nm", "savepoint_opt", "create_table", "create_table_args", + "createkw", "temp", "ifnotexists", "dbnm", + "columnlist", "conslist_opt", "table_options", "select", + "column", "columnid", "type", "carglist", + "typetoken", "typename", "signed", "plus_num", + "minus_num", "ccons", "term", "expr", + "onconf", "sortorder", "autoinc", "idxlist_opt", + "refargs", "defer_subclause", "refarg", "refact", + "init_deferred_pred_opt", "conslist", "tconscomma", "tcons", + "idxlist", "defer_subclause_opt", "orconf", "resolvetype", + "raisetype", "ifexists", "fullname", "selectnowith", + "oneselect", "with", "multiselect_op", "distinct", + "selcollist", "from", "where_opt", "groupby_opt", + "having_opt", "orderby_opt", "limit_opt", "values", + "nexprlist", "exprlist", "sclp", "as", + "seltablist", "stl_prefix", "joinop", "indexed_opt", + "on_opt", "using_opt", "joinop2", "idlist", + "sortlist", "setlist", "insert_cmd", "inscollist_opt", + "likeop", "between_op", "in_op", "case_operand", + "case_exprlist", "case_else", "uniqueflag", "collate", + "nmnum", "trigger_decl", "trigger_cmd_list", "trigger_time", + "trigger_event", "foreach_clause", "when_clause", "trigger_cmd", + "trnm", "tridxby", "database_kw_opt", "key_opt", + "add_column_fullname", "kwcolumn_opt", "create_vtab", "vtabarglist", + "vtabarg", "vtabargtoken", "lp", "anylist", + "wqlist", +}; +#endif /* NDEBUG */ + +#ifndef NDEBUG +/* For tracing reduce actions, the names of all rules are required. */ -static sqlite3_index_info *allocateIndexInfo( - Parse *pParse, - WhereClause *pWC, - struct SrcList_item *pSrc, - ExprList *pOrderBy -){ - int i, j; - int nTerm; - struct sqlite3_index_constraint *pIdxCons; - struct sqlite3_index_orderby *pIdxOrderBy; - struct sqlite3_index_constraint_usage *pUsage; - WhereTerm *pTerm; - int nOrderBy; - sqlite3_index_info *pIdxInfo; +static const char *const yyRuleName[] = { + /* 0 */ "input ::= cmdlist", + /* 1 */ "cmdlist ::= cmdlist ecmd", + /* 2 */ "cmdlist ::= ecmd", + /* 3 */ "ecmd ::= SEMI", + /* 4 */ "ecmd ::= explain cmdx SEMI", + /* 5 */ "explain ::=", + /* 6 */ "explain ::= EXPLAIN", + /* 7 */ "explain ::= EXPLAIN QUERY PLAN", + /* 8 */ "cmdx ::= cmd", + /* 9 */ "cmd ::= BEGIN transtype trans_opt", + /* 10 */ "trans_opt ::=", + /* 11 */ "trans_opt ::= TRANSACTION", + /* 12 */ "trans_opt ::= TRANSACTION nm", + /* 13 */ "transtype ::=", + /* 14 */ "transtype ::= DEFERRED", + /* 15 */ "transtype ::= IMMEDIATE", + /* 16 */ "transtype ::= EXCLUSIVE", + /* 17 */ "cmd ::= COMMIT trans_opt", + /* 18 */ "cmd ::= END trans_opt", + /* 19 */ "cmd ::= ROLLBACK trans_opt", + /* 20 */ "savepoint_opt ::= SAVEPOINT", + /* 21 */ "savepoint_opt ::=", + /* 22 */ "cmd ::= SAVEPOINT nm", + /* 23 */ "cmd ::= RELEASE savepoint_opt nm", + /* 24 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm", + /* 25 */ "cmd ::= create_table create_table_args", + /* 26 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm", + /* 27 */ "createkw ::= CREATE", + /* 28 */ "ifnotexists ::=", + /* 29 */ "ifnotexists ::= IF NOT EXISTS", + /* 30 */ "temp ::= TEMP", + /* 31 */ "temp ::=", + /* 32 */ "create_table_args ::= LP columnlist conslist_opt RP table_options", + /* 33 */ "create_table_args ::= AS select", + /* 34 */ "table_options ::=", + /* 35 */ "table_options ::= WITHOUT nm", + /* 36 */ "columnlist ::= columnlist COMMA column", + /* 37 */ "columnlist ::= column", + /* 38 */ "column ::= columnid type carglist", + /* 39 */ "columnid ::= nm", + /* 40 */ "nm ::= ID|INDEXED", + /* 41 */ "nm ::= STRING", + /* 42 */ "nm ::= JOIN_KW", + /* 43 */ "type ::=", + /* 44 */ "type ::= typetoken", + /* 45 */ "typetoken ::= typename", + /* 46 */ "typetoken ::= typename LP signed RP", + /* 47 */ "typetoken ::= typename LP signed COMMA signed RP", + /* 48 */ "typename ::= ID|STRING", + /* 49 */ "typename ::= typename ID|STRING", + /* 50 */ "signed ::= plus_num", + /* 51 */ "signed ::= minus_num", + /* 52 */ "carglist ::= carglist ccons", + /* 53 */ "carglist ::=", + /* 54 */ "ccons ::= CONSTRAINT nm", + /* 55 */ "ccons ::= DEFAULT term", + /* 56 */ "ccons ::= DEFAULT LP expr RP", + /* 57 */ "ccons ::= DEFAULT PLUS term", + /* 58 */ "ccons ::= DEFAULT MINUS term", + /* 59 */ "ccons ::= DEFAULT ID|INDEXED", + /* 60 */ "ccons ::= NULL onconf", + /* 61 */ "ccons ::= NOT NULL onconf", + /* 62 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc", + /* 63 */ "ccons ::= UNIQUE onconf", + /* 64 */ "ccons ::= CHECK LP expr RP", + /* 65 */ "ccons ::= REFERENCES nm idxlist_opt refargs", + /* 66 */ "ccons ::= defer_subclause", + /* 67 */ "ccons ::= COLLATE ID|STRING", + /* 68 */ "autoinc ::=", + /* 69 */ "autoinc ::= AUTOINCR", + /* 70 */ "refargs ::=", + /* 71 */ "refargs ::= refargs refarg", + /* 72 */ "refarg ::= MATCH nm", + /* 73 */ "refarg ::= ON INSERT refact", + /* 74 */ "refarg ::= ON DELETE refact", + /* 75 */ "refarg ::= ON UPDATE refact", + /* 76 */ "refact ::= SET NULL", + /* 77 */ "refact ::= SET DEFAULT", + /* 78 */ "refact ::= CASCADE", + /* 79 */ "refact ::= RESTRICT", + /* 80 */ "refact ::= NO ACTION", + /* 81 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt", + /* 82 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt", + /* 83 */ "init_deferred_pred_opt ::=", + /* 84 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED", + /* 85 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE", + /* 86 */ "conslist_opt ::=", + /* 87 */ "conslist_opt ::= COMMA conslist", + /* 88 */ "conslist ::= conslist tconscomma tcons", + /* 89 */ "conslist ::= tcons", + /* 90 */ "tconscomma ::= COMMA", + /* 91 */ "tconscomma ::=", + /* 92 */ "tcons ::= CONSTRAINT nm", + /* 93 */ "tcons ::= PRIMARY KEY LP idxlist autoinc RP onconf", + /* 94 */ "tcons ::= UNIQUE LP idxlist RP onconf", + /* 95 */ "tcons ::= CHECK LP expr RP onconf", + /* 96 */ "tcons ::= FOREIGN KEY LP idxlist RP REFERENCES nm idxlist_opt refargs defer_subclause_opt", + /* 97 */ "defer_subclause_opt ::=", + /* 98 */ "defer_subclause_opt ::= defer_subclause", + /* 99 */ "onconf ::=", + /* 100 */ "onconf ::= ON CONFLICT resolvetype", + /* 101 */ "orconf ::=", + /* 102 */ "orconf ::= OR resolvetype", + /* 103 */ "resolvetype ::= raisetype", + /* 104 */ "resolvetype ::= IGNORE", + /* 105 */ "resolvetype ::= REPLACE", + /* 106 */ "cmd ::= DROP TABLE ifexists fullname", + /* 107 */ "ifexists ::= IF EXISTS", + /* 108 */ "ifexists ::=", + /* 109 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm AS select", + /* 110 */ "cmd ::= DROP VIEW ifexists fullname", + /* 111 */ "cmd ::= select", + /* 112 */ "select ::= with selectnowith", + /* 113 */ "selectnowith ::= oneselect", + /* 114 */ "selectnowith ::= selectnowith multiselect_op oneselect", + /* 115 */ "multiselect_op ::= UNION", + /* 116 */ "multiselect_op ::= UNION ALL", + /* 117 */ "multiselect_op ::= EXCEPT|INTERSECT", + /* 118 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", + /* 119 */ "oneselect ::= values", + /* 120 */ "values ::= VALUES LP nexprlist RP", + /* 121 */ "values ::= values COMMA LP exprlist RP", + /* 122 */ "distinct ::= DISTINCT", + /* 123 */ "distinct ::= ALL", + /* 124 */ "distinct ::=", + /* 125 */ "sclp ::= selcollist COMMA", + /* 126 */ "sclp ::=", + /* 127 */ "selcollist ::= sclp expr as", + /* 128 */ "selcollist ::= sclp STAR", + /* 129 */ "selcollist ::= sclp nm DOT STAR", + /* 130 */ "as ::= AS nm", + /* 131 */ "as ::= ID|STRING", + /* 132 */ "as ::=", + /* 133 */ "from ::=", + /* 134 */ "from ::= FROM seltablist", + /* 135 */ "stl_prefix ::= seltablist joinop", + /* 136 */ "stl_prefix ::=", + /* 137 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", + /* 138 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", + /* 139 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", + /* 140 */ "dbnm ::=", + /* 141 */ "dbnm ::= DOT nm", + /* 142 */ "fullname ::= nm dbnm", + /* 143 */ "joinop ::= COMMA|JOIN", + /* 144 */ "joinop ::= JOIN_KW JOIN", + /* 145 */ "joinop ::= JOIN_KW nm JOIN", + /* 146 */ "joinop ::= JOIN_KW nm nm JOIN", + /* 147 */ "on_opt ::= ON expr", + /* 148 */ "on_opt ::=", + /* 149 */ "indexed_opt ::=", + /* 150 */ "indexed_opt ::= INDEXED BY nm", + /* 151 */ "indexed_opt ::= NOT INDEXED", + /* 152 */ "using_opt ::= USING LP idlist RP", + /* 153 */ "using_opt ::=", + /* 154 */ "orderby_opt ::=", + /* 155 */ "orderby_opt ::= ORDER BY sortlist", + /* 156 */ "sortlist ::= sortlist COMMA expr sortorder", + /* 157 */ "sortlist ::= expr sortorder", + /* 158 */ "sortorder ::= ASC", + /* 159 */ "sortorder ::= DESC", + /* 160 */ "sortorder ::=", + /* 161 */ "groupby_opt ::=", + /* 162 */ "groupby_opt ::= GROUP BY nexprlist", + /* 163 */ "having_opt ::=", + /* 164 */ "having_opt ::= HAVING expr", + /* 165 */ "limit_opt ::=", + /* 166 */ "limit_opt ::= LIMIT expr", + /* 167 */ "limit_opt ::= LIMIT expr OFFSET expr", + /* 168 */ "limit_opt ::= LIMIT expr COMMA expr", + /* 169 */ "cmd ::= with DELETE FROM fullname indexed_opt where_opt", + /* 170 */ "where_opt ::=", + /* 171 */ "where_opt ::= WHERE expr", + /* 172 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt", + /* 173 */ "setlist ::= setlist COMMA nm EQ expr", + /* 174 */ "setlist ::= nm EQ expr", + /* 175 */ "cmd ::= with insert_cmd INTO fullname inscollist_opt select", + /* 176 */ "cmd ::= with insert_cmd INTO fullname inscollist_opt DEFAULT VALUES", + /* 177 */ "insert_cmd ::= INSERT orconf", + /* 178 */ "insert_cmd ::= REPLACE", + /* 179 */ "inscollist_opt ::=", + /* 180 */ "inscollist_opt ::= LP idlist RP", + /* 181 */ "idlist ::= idlist COMMA nm", + /* 182 */ "idlist ::= nm", + /* 183 */ "expr ::= term", + /* 184 */ "expr ::= LP expr RP", + /* 185 */ "term ::= NULL", + /* 186 */ "expr ::= ID|INDEXED", + /* 187 */ "expr ::= JOIN_KW", + /* 188 */ "expr ::= nm DOT nm", + /* 189 */ "expr ::= nm DOT nm DOT nm", + /* 190 */ "term ::= INTEGER|FLOAT|BLOB", + /* 191 */ "term ::= STRING", + /* 192 */ "expr ::= VARIABLE", + /* 193 */ "expr ::= expr COLLATE ID|STRING", + /* 194 */ "expr ::= CAST LP expr AS typetoken RP", + /* 195 */ "expr ::= ID|INDEXED LP distinct exprlist RP", + /* 196 */ "expr ::= ID|INDEXED LP STAR RP", + /* 197 */ "term ::= CTIME_KW", + /* 198 */ "expr ::= expr AND expr", + /* 199 */ "expr ::= expr OR expr", + /* 200 */ "expr ::= expr LT|GT|GE|LE expr", + /* 201 */ "expr ::= expr EQ|NE expr", + /* 202 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", + /* 203 */ "expr ::= expr PLUS|MINUS expr", + /* 204 */ "expr ::= expr STAR|SLASH|REM expr", + /* 205 */ "expr ::= expr CONCAT expr", + /* 206 */ "likeop ::= LIKE_KW|MATCH", + /* 207 */ "likeop ::= NOT LIKE_KW|MATCH", + /* 208 */ "expr ::= expr likeop expr", + /* 209 */ "expr ::= expr likeop expr ESCAPE expr", + /* 210 */ "expr ::= expr ISNULL|NOTNULL", + /* 211 */ "expr ::= expr NOT NULL", + /* 212 */ "expr ::= expr IS expr", + /* 213 */ "expr ::= expr IS NOT expr", + /* 214 */ "expr ::= NOT expr", + /* 215 */ "expr ::= BITNOT expr", + /* 216 */ "expr ::= MINUS expr", + /* 217 */ "expr ::= PLUS expr", + /* 218 */ "between_op ::= BETWEEN", + /* 219 */ "between_op ::= NOT BETWEEN", + /* 220 */ "expr ::= expr between_op expr AND expr", + /* 221 */ "in_op ::= IN", + /* 222 */ "in_op ::= NOT IN", + /* 223 */ "expr ::= expr in_op LP exprlist RP", + /* 224 */ "expr ::= LP select RP", + /* 225 */ "expr ::= expr in_op LP select RP", + /* 226 */ "expr ::= expr in_op nm dbnm", + /* 227 */ "expr ::= EXISTS LP select RP", + /* 228 */ "expr ::= CASE case_operand case_exprlist case_else END", + /* 229 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", + /* 230 */ "case_exprlist ::= WHEN expr THEN expr", + /* 231 */ "case_else ::= ELSE expr", + /* 232 */ "case_else ::=", + /* 233 */ "case_operand ::= expr", + /* 234 */ "case_operand ::=", + /* 235 */ "exprlist ::= nexprlist", + /* 236 */ "exprlist ::=", + /* 237 */ "nexprlist ::= nexprlist COMMA expr", + /* 238 */ "nexprlist ::= expr", + /* 239 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP idxlist RP where_opt", + /* 240 */ "uniqueflag ::= UNIQUE", + /* 241 */ "uniqueflag ::=", + /* 242 */ "idxlist_opt ::=", + /* 243 */ "idxlist_opt ::= LP idxlist RP", + /* 244 */ "idxlist ::= idxlist COMMA nm collate sortorder", + /* 245 */ "idxlist ::= nm collate sortorder", + /* 246 */ "collate ::=", + /* 247 */ "collate ::= COLLATE ID|STRING", + /* 248 */ "cmd ::= DROP INDEX ifexists fullname", + /* 249 */ "cmd ::= VACUUM", + /* 250 */ "cmd ::= VACUUM nm", + /* 251 */ "cmd ::= PRAGMA nm dbnm", + /* 252 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", + /* 253 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", + /* 254 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", + /* 255 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", + /* 256 */ "nmnum ::= plus_num", + /* 257 */ "nmnum ::= nm", + /* 258 */ "nmnum ::= ON", + /* 259 */ "nmnum ::= DELETE", + /* 260 */ "nmnum ::= DEFAULT", + /* 261 */ "plus_num ::= PLUS INTEGER|FLOAT", + /* 262 */ "plus_num ::= INTEGER|FLOAT", + /* 263 */ "minus_num ::= MINUS INTEGER|FLOAT", + /* 264 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", + /* 265 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", + /* 266 */ "trigger_time ::= BEFORE", + /* 267 */ "trigger_time ::= AFTER", + /* 268 */ "trigger_time ::= INSTEAD OF", + /* 269 */ "trigger_time ::=", + /* 270 */ "trigger_event ::= DELETE|INSERT", + /* 271 */ "trigger_event ::= UPDATE", + /* 272 */ "trigger_event ::= UPDATE OF idlist", + /* 273 */ "foreach_clause ::=", + /* 274 */ "foreach_clause ::= FOR EACH ROW", + /* 275 */ "when_clause ::=", + /* 276 */ "when_clause ::= WHEN expr", + /* 277 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", + /* 278 */ "trigger_cmd_list ::= trigger_cmd SEMI", + /* 279 */ "trnm ::= nm", + /* 280 */ "trnm ::= nm DOT nm", + /* 281 */ "tridxby ::=", + /* 282 */ "tridxby ::= INDEXED BY nm", + /* 283 */ "tridxby ::= NOT INDEXED", + /* 284 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt", + /* 285 */ "trigger_cmd ::= insert_cmd INTO trnm inscollist_opt select", + /* 286 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt", + /* 287 */ "trigger_cmd ::= select", + /* 288 */ "expr ::= RAISE LP IGNORE RP", + /* 289 */ "expr ::= RAISE LP raisetype COMMA nm RP", + /* 290 */ "raisetype ::= ROLLBACK", + /* 291 */ "raisetype ::= ABORT", + /* 292 */ "raisetype ::= FAIL", + /* 293 */ "cmd ::= DROP TRIGGER ifexists fullname", + /* 294 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", + /* 295 */ "cmd ::= DETACH database_kw_opt expr", + /* 296 */ "key_opt ::=", + /* 297 */ "key_opt ::= KEY expr", + /* 298 */ "database_kw_opt ::= DATABASE", + /* 299 */ "database_kw_opt ::=", + /* 300 */ "cmd ::= REINDEX", + /* 301 */ "cmd ::= REINDEX nm dbnm", + /* 302 */ "cmd ::= ANALYZE", + /* 303 */ "cmd ::= ANALYZE nm dbnm", + /* 304 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", + /* 305 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column", + /* 306 */ "add_column_fullname ::= fullname", + /* 307 */ "kwcolumn_opt ::=", + /* 308 */ "kwcolumn_opt ::= COLUMNKW", + /* 309 */ "cmd ::= create_vtab", + /* 310 */ "cmd ::= create_vtab LP vtabarglist RP", + /* 311 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm", + /* 312 */ "vtabarglist ::= vtabarg", + /* 313 */ "vtabarglist ::= vtabarglist COMMA vtabarg", + /* 314 */ "vtabarg ::=", + /* 315 */ "vtabarg ::= vtabarg vtabargtoken", + /* 316 */ "vtabargtoken ::= ANY", + /* 317 */ "vtabargtoken ::= lp anylist RP", + /* 318 */ "lp ::= LP", + /* 319 */ "anylist ::=", + /* 320 */ "anylist ::= anylist LP anylist RP", + /* 321 */ "anylist ::= anylist ANY", + /* 322 */ "with ::=", + /* 323 */ "with ::= WITH wqlist", + /* 324 */ "with ::= WITH RECURSIVE wqlist", + /* 325 */ "wqlist ::= nm idxlist_opt AS LP select RP", + /* 326 */ "wqlist ::= wqlist COMMA nm idxlist_opt AS LP select RP", +}; +#endif /* NDEBUG */ - WHERETRACE(("Recomputing index info for %s...\n", pSrc->pTab->zName)); - /* Count the number of possible WHERE clause constraints referring - ** to this virtual table */ - for(i=nTerm=0, pTerm=pWC->a; inTerm; i++, pTerm++){ - if( pTerm->leftCursor != pSrc->iCursor ) continue; - assert( (pTerm->eOperator&(pTerm->eOperator-1))==0 ); - testcase( pTerm->eOperator==WO_IN ); - testcase( pTerm->eOperator==WO_ISNULL ); - if( pTerm->eOperator & (WO_IN|WO_ISNULL) ) continue; - nTerm++; - } +#if YYSTACKDEPTH<=0 +/* +** Try to increase the size of the parser stack. +*/ +static void yyGrowStack(yyParser *p){ + int newSize; + yyStackEntry *pNew; - /* If the ORDER BY clause contains only columns in the current - ** virtual table then allocate space for the aOrderBy part of - ** the sqlite3_index_info structure. - */ - nOrderBy = 0; - if( pOrderBy ){ - for(i=0; inExpr; i++){ - Expr *pExpr = pOrderBy->a[i].pExpr; - if( pExpr->op!=TK_COLUMN || pExpr->iTable!=pSrc->iCursor ) break; - } - if( i==pOrderBy->nExpr ){ - nOrderBy = pOrderBy->nExpr; + newSize = p->yystksz*2 + 100; + pNew = realloc(p->yystack, newSize*sizeof(pNew[0])); + if( pNew ){ + p->yystack = pNew; + p->yystksz = newSize; +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sStack grows to %d entries!\n", + yyTracePrompt, p->yystksz); } +#endif } - - /* Allocate the sqlite3_index_info structure - */ - pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo) - + (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm - + sizeof(*pIdxOrderBy)*nOrderBy ); - if( pIdxInfo==0 ){ - sqlite3ErrorMsg(pParse, "out of memory"); - /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ - return 0; - } - - /* Initialize the structure. The sqlite3_index_info structure contains - ** many fields that are declared "const" to prevent xBestIndex from - ** changing them. We have to do some funky casting in order to - ** initialize those fields. - */ - pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1]; - pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm]; - pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy]; - *(int*)&pIdxInfo->nConstraint = nTerm; - *(int*)&pIdxInfo->nOrderBy = nOrderBy; - *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint = pIdxCons; - *(struct sqlite3_index_orderby**)&pIdxInfo->aOrderBy = pIdxOrderBy; - *(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage = - pUsage; - - for(i=j=0, pTerm=pWC->a; inTerm; i++, pTerm++){ - if( pTerm->leftCursor != pSrc->iCursor ) continue; - assert( (pTerm->eOperator&(pTerm->eOperator-1))==0 ); - testcase( pTerm->eOperator==WO_IN ); - testcase( pTerm->eOperator==WO_ISNULL ); - if( pTerm->eOperator & (WO_IN|WO_ISNULL) ) continue; - pIdxCons[j].iColumn = pTerm->u.leftColumn; - pIdxCons[j].iTermOffset = i; - pIdxCons[j].op = (u8)pTerm->eOperator; - /* The direct assignment in the previous line is possible only because - ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The - ** following asserts verify this fact. */ - assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); - assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); - assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); - assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); - assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); - assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH ); - assert( pTerm->eOperator & (WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) ); - j++; - } - for(i=0; ia[i].pExpr; - pIdxOrderBy[i].iColumn = pExpr->iColumn; - pIdxOrderBy[i].desc = pOrderBy->a[i].sortOrder; - } - - return pIdxInfo; } +#endif -/* -** The table object reference passed as the second argument to this function -** must represent a virtual table. This function invokes the xBestIndex() -** method of the virtual table with the sqlite3_index_info pointer passed -** as the argument. +/* +** This function allocates a new parser. +** The only argument is a pointer to a function which works like +** malloc. ** -** If an error occurs, pParse is populated with an error message and a -** non-zero value is returned. Otherwise, 0 is returned and the output -** part of the sqlite3_index_info structure is left populated. +** Inputs: +** A pointer to the function used to allocate memory. ** -** Whether or not an error is returned, it is the responsibility of the -** caller to eventually free p->idxStr if p->needToFreeIdxStr indicates -** that this is required. +** Outputs: +** A pointer to a parser. This pointer is used in subsequent calls +** to sqlite3Parser and sqlite3ParserFree. */ -static int vtabBestIndex(Parse *pParse, Table *pTab, sqlite3_index_info *p){ - sqlite3_vtab *pVtab = sqlite3GetVTable(pParse->db, pTab)->pVtab; - int i; - int rc; - - WHERETRACE(("xBestIndex for %s\n", pTab->zName)); - TRACE_IDX_INPUTS(p); - rc = pVtab->pModule->xBestIndex(pVtab, p); - TRACE_IDX_OUTPUTS(p); - - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_NOMEM ){ - pParse->db->mallocFailed = 1; - }else if( !pVtab->zErrMsg ){ - sqlite3ErrorMsg(pParse, "%s", sqlite3ErrStr(rc)); - }else{ - sqlite3ErrorMsg(pParse, "%s", pVtab->zErrMsg); - } +SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(u64)){ + yyParser *pParser; + pParser = (yyParser*)(*mallocProc)( (u64)sizeof(yyParser) ); + if( pParser ){ + pParser->yyidx = -1; +#ifdef YYTRACKMAXSTACKDEPTH + pParser->yyidxMax = 0; +#endif +#if YYSTACKDEPTH<=0 + pParser->yystack = NULL; + pParser->yystksz = 0; + yyGrowStack(pParser); +#endif } - sqlite3_free(pVtab->zErrMsg); - pVtab->zErrMsg = 0; + return pParser; +} - for(i=0; inConstraint; i++){ - if( !p->aConstraint[i].usable && p->aConstraintUsage[i].argvIndex>0 ){ - sqlite3ErrorMsg(pParse, - "table %s: xBestIndex returned an invalid plan", pTab->zName); - } +/* The following function deletes the value associated with a +** symbol. The symbol can be either a terminal or nonterminal. +** "yymajor" is the symbol code, and "yypminor" is a pointer to +** the value. +*/ +static void yy_destructor( + yyParser *yypParser, /* The parser */ + YYCODETYPE yymajor, /* Type code for object to destroy */ + YYMINORTYPE *yypminor /* The object to be destroyed */ +){ + sqlite3ParserARG_FETCH; + switch( yymajor ){ + /* Here is inserted the actions which take place when a + ** terminal or non-terminal is destroyed. This can happen + ** when the symbol is popped from the stack during a + ** reduce or during error processing or when a parser is + ** being destroyed before it is finished parsing. + ** + ** Note: during a reduce, the only symbols destroyed are those + ** which appear on the RHS of the rule, but which are not used + ** inside the C code. + */ + case 163: /* select */ + case 195: /* selectnowith */ + case 196: /* oneselect */ + case 207: /* values */ +{ +sqlite3SelectDelete(pParse->db, (yypminor->yy3)); +} + break; + case 174: /* term */ + case 175: /* expr */ +{ +sqlite3ExprDelete(pParse->db, (yypminor->yy346).pExpr); +} + break; + case 179: /* idxlist_opt */ + case 188: /* idxlist */ + case 200: /* selcollist */ + case 203: /* groupby_opt */ + case 205: /* orderby_opt */ + case 208: /* nexprlist */ + case 209: /* exprlist */ + case 210: /* sclp */ + case 220: /* sortlist */ + case 221: /* setlist */ + case 228: /* case_exprlist */ +{ +sqlite3ExprListDelete(pParse->db, (yypminor->yy14)); +} + break; + case 194: /* fullname */ + case 201: /* from */ + case 212: /* seltablist */ + case 213: /* stl_prefix */ +{ +sqlite3SrcListDelete(pParse->db, (yypminor->yy65)); +} + break; + case 197: /* with */ + case 252: /* wqlist */ +{ +sqlite3WithDelete(pParse->db, (yypminor->yy59)); +} + break; + case 202: /* where_opt */ + case 204: /* having_opt */ + case 216: /* on_opt */ + case 227: /* case_operand */ + case 229: /* case_else */ + case 238: /* when_clause */ + case 243: /* key_opt */ +{ +sqlite3ExprDelete(pParse->db, (yypminor->yy132)); +} + break; + case 217: /* using_opt */ + case 219: /* idlist */ + case 223: /* inscollist_opt */ +{ +sqlite3IdListDelete(pParse->db, (yypminor->yy408)); +} + break; + case 234: /* trigger_cmd_list */ + case 239: /* trigger_cmd */ +{ +sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy473)); +} + break; + case 236: /* trigger_event */ +{ +sqlite3IdListDelete(pParse->db, (yypminor->yy378).b); +} + break; + default: break; /* If no destructor action specified: do nothing */ } - - return pParse->nErr; } - /* -** Compute the best index for a virtual table. +** Pop the parser's stack once. ** -** The best index is computed by the xBestIndex method of the virtual -** table module. This routine is really just a wrapper that sets up -** the sqlite3_index_info structure that is used to communicate with -** xBestIndex. +** If there is a destructor routine associated with the token which +** is popped from the stack, then call it. ** -** In a join, this routine might be called multiple times for the -** same virtual table. The sqlite3_index_info structure is created -** and initialized on the first invocation and reused on all subsequent -** invocations. The sqlite3_index_info structure is also used when -** code is generated to access the virtual table. The whereInfoDelete() -** routine takes care of freeing the sqlite3_index_info structure after -** everybody has finished with it. +** Return the major token number for the symbol popped. */ -static void bestVirtualIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to search */ - Bitmask notReady, /* Mask of cursors not available for index */ - Bitmask notValid, /* Cursors not valid for any purpose */ - ExprList *pOrderBy, /* The order by clause */ - WhereCost *pCost, /* Lowest cost query plan */ - sqlite3_index_info **ppIdxInfo /* Index information passed to xBestIndex */ -){ - Table *pTab = pSrc->pTab; - sqlite3_index_info *pIdxInfo; - struct sqlite3_index_constraint *pIdxCons; - struct sqlite3_index_constraint_usage *pUsage; - WhereTerm *pTerm; - int i, j; - int nOrderBy; - double rCost; - - /* Make sure wsFlags is initialized to some sane value. Otherwise, if the - ** malloc in allocateIndexInfo() fails and this function returns leaving - ** wsFlags in an uninitialized state, the caller may behave unpredictably. - */ - memset(pCost, 0, sizeof(*pCost)); - pCost->plan.wsFlags = WHERE_VIRTUALTABLE; - - /* If the sqlite3_index_info structure has not been previously - ** allocated and initialized, then allocate and initialize it now. - */ - pIdxInfo = *ppIdxInfo; - if( pIdxInfo==0 ){ - *ppIdxInfo = pIdxInfo = allocateIndexInfo(pParse, pWC, pSrc, pOrderBy); - } - if( pIdxInfo==0 ){ - return; - } - - /* At this point, the sqlite3_index_info structure that pIdxInfo points - ** to will have been initialized, either during the current invocation or - ** during some prior invocation. Now we just have to customize the - ** details of pIdxInfo for the current invocation and pass it to - ** xBestIndex. - */ - - /* The module name must be defined. Also, by this point there must - ** be a pointer to an sqlite3_vtab structure. Otherwise - ** sqlite3ViewGetColumnNames() would have picked up the error. - */ - assert( pTab->azModuleArg && pTab->azModuleArg[0] ); - assert( sqlite3GetVTable(pParse->db, pTab) ); - - /* Set the aConstraint[].usable fields and initialize all - ** output variables to zero. - ** - ** aConstraint[].usable is true for constraints where the right-hand - ** side contains only references to tables to the left of the current - ** table. In other words, if the constraint is of the form: - ** - ** column = expr - ** - ** and we are evaluating a join, then the constraint on column is - ** only valid if all tables referenced in expr occur to the left - ** of the table containing column. - ** - ** The aConstraints[] array contains entries for all constraints - ** on the current table. That way we only have to compute it once - ** even though we might try to pick the best index multiple times. - ** For each attempt at picking an index, the order of tables in the - ** join might be different so we have to recompute the usable flag - ** each time. - */ - pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint; - pUsage = pIdxInfo->aConstraintUsage; - for(i=0; inConstraint; i++, pIdxCons++){ - j = pIdxCons->iTermOffset; - pTerm = &pWC->a[j]; - pIdxCons->usable = (pTerm->prereqRight¬Ready) ? 0 : 1; - } - memset(pUsage, 0, sizeof(pUsage[0])*pIdxInfo->nConstraint); - if( pIdxInfo->needToFreeIdxStr ){ - sqlite3_free(pIdxInfo->idxStr); - } - pIdxInfo->idxStr = 0; - pIdxInfo->idxNum = 0; - pIdxInfo->needToFreeIdxStr = 0; - pIdxInfo->orderByConsumed = 0; - /* ((double)2) In case of SQLITE_OMIT_FLOATING_POINT... */ - pIdxInfo->estimatedCost = SQLITE_BIG_DBL / ((double)2); - nOrderBy = pIdxInfo->nOrderBy; - if( !pOrderBy ){ - pIdxInfo->nOrderBy = 0; - } - - if( vtabBestIndex(pParse, pTab, pIdxInfo) ){ - return; - } - - pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint; - for(i=0; inConstraint; i++){ - if( pUsage[i].argvIndex>0 ){ - pCost->used |= pWC->a[pIdxCons[i].iTermOffset].prereqRight; - } - } +static int yy_pop_parser_stack(yyParser *pParser){ + YYCODETYPE yymajor; + yyStackEntry *yytos = &pParser->yystack[pParser->yyidx]; - /* If there is an ORDER BY clause, and the selected virtual table index - ** does not satisfy it, increase the cost of the scan accordingly. This - ** matches the processing for non-virtual tables in bestBtreeIndex(). - */ - rCost = pIdxInfo->estimatedCost; - if( pOrderBy && pIdxInfo->orderByConsumed==0 ){ - rCost += estLog(rCost)*rCost; + /* There is no mechanism by which the parser stack can be popped below + ** empty in SQLite. */ + if( NEVER(pParser->yyidx<0) ) return 0; +#ifndef NDEBUG + if( yyTraceFILE && pParser->yyidx>=0 ){ + fprintf(yyTraceFILE,"%sPopping %s\n", + yyTracePrompt, + yyTokenName[yytos->major]); } +#endif + yymajor = yytos->major; + yy_destructor(pParser, yymajor, &yytos->minor); + pParser->yyidx--; + return yymajor; +} - /* The cost is not allowed to be larger than SQLITE_BIG_DBL (the - ** inital value of lowestCost in this loop. If it is, then the - ** (costrCost = (SQLITE_BIG_DBL/((double)2)); - }else{ - pCost->rCost = rCost; - } - pCost->plan.u.pVtabIdx = pIdxInfo; - if( pIdxInfo->orderByConsumed ){ - pCost->plan.wsFlags |= WHERE_ORDERBY; - } - pCost->plan.nEq = 0; - pIdxInfo->nOrderBy = nOrderBy; +/* +** Deallocate and destroy a parser. Destructors are all called for +** all stack elements before shutting the parser down. +** +** Inputs: +**
    +**
  • A pointer to the parser. This should be a pointer +** obtained from sqlite3ParserAlloc. +**
  • A pointer to a function used to reclaim memory obtained +** from malloc. +**
+*/ +SQLITE_PRIVATE void sqlite3ParserFree( + void *p, /* The parser to be deleted */ + void (*freeProc)(void*) /* Function used to reclaim memory */ +){ + yyParser *pParser = (yyParser*)p; + /* In SQLite, we never try to destroy a parser that was not successfully + ** created in the first place. */ + if( NEVER(pParser==0) ) return; + while( pParser->yyidx>=0 ) yy_pop_parser_stack(pParser); +#if YYSTACKDEPTH<=0 + free(pParser->yystack); +#endif + (*freeProc)((void*)pParser); +} - /* Try to find a more efficient access pattern by using multiple indexes - ** to optimize an OR expression within the WHERE clause. - */ - bestOrClauseIndex(pParse, pWC, pSrc, notReady, notValid, pOrderBy, pCost); +/* +** Return the peak depth of the stack for a parser. +*/ +#ifdef YYTRACKMAXSTACKDEPTH +SQLITE_PRIVATE int sqlite3ParserStackPeak(void *p){ + yyParser *pParser = (yyParser*)p; + return pParser->yyidxMax; } -#endif /* SQLITE_OMIT_VIRTUALTABLE */ +#endif /* -** Argument pIdx is a pointer to an index structure that has an array of -** SQLITE_INDEX_SAMPLES evenly spaced samples of the first indexed column -** stored in Index.aSample. These samples divide the domain of values stored -** the index into (SQLITE_INDEX_SAMPLES+1) regions. -** Region 0 contains all values less than the first sample value. Region -** 1 contains values between the first and second samples. Region 2 contains -** values between samples 2 and 3. And so on. Region SQLITE_INDEX_SAMPLES -** contains values larger than the last sample. -** -** If the index contains many duplicates of a single value, then it is -** possible that two or more adjacent samples can hold the same value. -** When that is the case, the smallest possible region code is returned -** when roundUp is false and the largest possible region code is returned -** when roundUp is true. -** -** If successful, this function determines which of the regions value -** pVal lies in, sets *piRegion to the region index (a value between 0 -** and SQLITE_INDEX_SAMPLES+1, inclusive) and returns SQLITE_OK. -** Or, if an OOM occurs while converting text values between encodings, -** SQLITE_NOMEM is returned and *piRegion is undefined. -*/ -#ifdef SQLITE_ENABLE_STAT2 -static int whereRangeRegion( - Parse *pParse, /* Database connection */ - Index *pIdx, /* Index to consider domain of */ - sqlite3_value *pVal, /* Value to consider */ - int roundUp, /* Return largest valid region if true */ - int *piRegion /* OUT: Region of domain in which value lies */ +** Find the appropriate action for a parser given the terminal +** look-ahead token iLookAhead. +** +** If the look-ahead token is YYNOCODE, then check to see if the action is +** independent of the look-ahead. If it is, return the action, otherwise +** return YY_NO_ACTION. +*/ +static int yy_find_shift_action( + yyParser *pParser, /* The parser */ + YYCODETYPE iLookAhead /* The look-ahead token */ ){ - assert( roundUp==0 || roundUp==1 ); - if( ALWAYS(pVal) ){ - IndexSample *aSample = pIdx->aSample; - int i = 0; - int eType = sqlite3_value_type(pVal); - - if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){ - double r = sqlite3_value_double(pVal); - for(i=0; i=SQLITE_TEXT ) break; - if( roundUp ){ - if( aSample[i].u.r>r ) break; - }else{ - if( aSample[i].u.r>=r ) break; - } - } - }else if( eType==SQLITE_NULL ){ - i = 0; - if( roundUp ){ - while( idb; - CollSeq *pColl; - const u8 *z; - int n; - - /* pVal comes from sqlite3ValueFromExpr() so the type cannot be NULL */ - assert( eType==SQLITE_TEXT || eType==SQLITE_BLOB ); - - if( eType==SQLITE_BLOB ){ - z = (const u8 *)sqlite3_value_blob(pVal); - pColl = db->pDfltColl; - assert( pColl->enc==SQLITE_UTF8 ); - }else{ - pColl = sqlite3GetCollSeq(db, SQLITE_UTF8, 0, *pIdx->azColl); - if( pColl==0 ){ - sqlite3ErrorMsg(pParse, "no such collation sequence: %s", - *pIdx->azColl); - return SQLITE_ERROR; - } - z = (const u8 *)sqlite3ValueText(pVal, pColl->enc); - if( !z ){ - return SQLITE_NOMEM; + int i; + int stateno = pParser->yystack[pParser->yyidx].stateno; + + if( stateno>YY_SHIFT_COUNT + || (i = yy_shift_ofst[stateno])==YY_SHIFT_USE_DFLT ){ + return yy_default[stateno]; + } + assert( iLookAhead!=YYNOCODE ); + i += iLookAhead; + if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ + if( iLookAhead>0 ){ +#ifdef YYFALLBACK + YYCODETYPE iFallback; /* Fallback token */ + if( iLookAhead %s\n", + yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]); } - assert( z && pColl && pColl->xCmp ); +#endif + return yy_find_shift_action(pParser, iFallback); } - n = sqlite3ValueBytes(pVal, pColl->enc); - - for(i=0; ienc!=SQLITE_UTF8 ){ - int nSample; - char *zSample = sqlite3Utf8to16( - db, pColl->enc, aSample[i].u.z, aSample[i].nByte, &nSample - ); - if( !zSample ){ - assert( db->mallocFailed ); - return SQLITE_NOMEM; - } - c = pColl->xCmp(pColl->pUser, nSample, zSample, n, z); - sqlite3DbFree(db, zSample); - }else #endif - { - c = pColl->xCmp(pColl->pUser, aSample[i].nByte, aSample[i].u.z, n, z); +#ifdef YYWILDCARD + { + int j = i - iLookAhead + YYWILDCARD; + if( +#if YY_SHIFT_MIN+YYWILDCARD<0 + j>=0 && +#endif +#if YY_SHIFT_MAX+YYWILDCARD>=YY_ACTTAB_COUNT + j %s\n", + yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[YYWILDCARD]); + } +#endif /* NDEBUG */ + return yy_action[j]; } - if( c-roundUp>=0 ) break; } +#endif /* YYWILDCARD */ } - - assert( i>=0 && i<=SQLITE_INDEX_SAMPLES ); - *piRegion = i; + return yy_default[stateno]; + }else{ + return yy_action[i]; } - return SQLITE_OK; } -#endif /* #ifdef SQLITE_ENABLE_STAT2 */ /* -** If expression pExpr represents a literal value, set *pp to point to -** an sqlite3_value structure containing the same value, with affinity -** aff applied to it, before returning. It is the responsibility of the -** caller to eventually release this structure by passing it to -** sqlite3ValueFree(). -** -** If the current parse is a recompile (sqlite3Reprepare()) and pExpr -** is an SQL variable that currently has a non-NULL value bound to it, -** create an sqlite3_value structure containing this value, again with -** affinity aff applied to it, instead. -** -** If neither of the above apply, set *pp to NULL. +** Find the appropriate action for a parser given the non-terminal +** look-ahead token iLookAhead. ** -** If an error occurs, return an error code. Otherwise, SQLITE_OK. +** If the look-ahead token is YYNOCODE, then check to see if the action is +** independent of the look-ahead. If it is, return the action, otherwise +** return YY_NO_ACTION. */ -#ifdef SQLITE_ENABLE_STAT2 -static int valueFromExpr( - Parse *pParse, - Expr *pExpr, - u8 aff, - sqlite3_value **pp +static int yy_find_reduce_action( + int stateno, /* Current state number */ + YYCODETYPE iLookAhead /* The look-ahead token */ ){ - if( pExpr->op==TK_VARIABLE - || (pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE) - ){ - int iVar = pExpr->iColumn; - sqlite3VdbeSetVarmask(pParse->pVdbe, iVar); /* IMP: R-23257-02778 */ - *pp = sqlite3VdbeGetValue(pParse->pReprepare, iVar, aff); - return SQLITE_OK; + int i; +#ifdef YYERRORSYMBOL + if( stateno>YY_REDUCE_COUNT ){ + return yy_default[stateno]; } - return sqlite3ValueFromExpr(pParse->db, pExpr, SQLITE_UTF8, aff, pp); -} +#else + assert( stateno<=YY_REDUCE_COUNT ); #endif - -/* -** This function is used to estimate the number of rows that will be visited -** by scanning an index for a range of values. The range may have an upper -** bound, a lower bound, or both. The WHERE clause terms that set the upper -** and lower bounds are represented by pLower and pUpper respectively. For -** example, assuming that index p is on t1(a): -** -** ... FROM t1 WHERE a > ? AND a < ? ... -** |_____| |_____| -** | | -** pLower pUpper -** -** If either of the upper or lower bound is not present, then NULL is passed in -** place of the corresponding WhereTerm. -** -** The nEq parameter is passed the index of the index column subject to the -** range constraint. Or, equivalently, the number of equality constraints -** optimized by the proposed index scan. For example, assuming index p is -** on t1(a, b), and the SQL query is: -** -** ... FROM t1 WHERE a = ? AND b > ? AND b < ? ... -** -** then nEq should be passed the value 1 (as the range restricted column, -** b, is the second left-most column of the index). Or, if the query is: -** -** ... FROM t1 WHERE a > ? AND a < ? ... -** -** then nEq should be passed 0. -** -** The returned value is an integer between 1 and 100, inclusive. A return -** value of 1 indicates that the proposed range scan is expected to visit -** approximately 1/100th (1%) of the rows selected by the nEq equality -** constraints (if any). A return value of 100 indicates that it is expected -** that the range scan will visit every row (100%) selected by the equality -** constraints. -** -** In the absence of sqlite_stat2 ANALYZE data, each range inequality -** reduces the search space by 3/4ths. Hence a single constraint (x>?) -** results in a return of 25 and a range constraint (x>? AND xaCol[] of the range-compared column */ - WhereTerm *pLower, /* Lower bound on the range. ex: "x>123" Might be NULL */ - WhereTerm *pUpper, /* Upper bound on the range. ex: "x<455" Might be NULL */ - int *piEst /* OUT: Return value */ -){ - int rc = SQLITE_OK; - -#ifdef SQLITE_ENABLE_STAT2 - - if( nEq==0 && p->aSample ){ - sqlite3_value *pLowerVal = 0; - sqlite3_value *pUpperVal = 0; - int iEst; - int iLower = 0; - int iUpper = SQLITE_INDEX_SAMPLES; - int roundUpUpper = 0; - int roundUpLower = 0; - u8 aff = p->pTable->aCol[p->aiColumn[0]].affinity; - - if( pLower ){ - Expr *pExpr = pLower->pExpr->pRight; - rc = valueFromExpr(pParse, pExpr, aff, &pLowerVal); - assert( pLower->eOperator==WO_GT || pLower->eOperator==WO_GE ); - roundUpLower = (pLower->eOperator==WO_GT) ?1:0; - } - if( rc==SQLITE_OK && pUpper ){ - Expr *pExpr = pUpper->pExpr->pRight; - rc = valueFromExpr(pParse, pExpr, aff, &pUpperVal); - assert( pUpper->eOperator==WO_LT || pUpper->eOperator==WO_LE ); - roundUpUpper = (pUpper->eOperator==WO_LE) ?1:0; - } - - if( rc!=SQLITE_OK || (pLowerVal==0 && pUpperVal==0) ){ - sqlite3ValueFree(pLowerVal); - sqlite3ValueFree(pUpperVal); - goto range_est_fallback; - }else if( pLowerVal==0 ){ - rc = whereRangeRegion(pParse, p, pUpperVal, roundUpUpper, &iUpper); - if( pLower ) iLower = iUpper/2; - }else if( pUpperVal==0 ){ - rc = whereRangeRegion(pParse, p, pLowerVal, roundUpLower, &iLower); - if( pUpper ) iUpper = (iLower + SQLITE_INDEX_SAMPLES + 1)/2; - }else{ - rc = whereRangeRegion(pParse, p, pUpperVal, roundUpUpper, &iUpper); - if( rc==SQLITE_OK ){ - rc = whereRangeRegion(pParse, p, pLowerVal, roundUpLower, &iLower); - } - } - WHERETRACE(("range scan regions: %d..%d\n", iLower, iUpper)); - - iEst = iUpper - iLower; - testcase( iEst==SQLITE_INDEX_SAMPLES ); - assert( iEst<=SQLITE_INDEX_SAMPLES ); - if( iEst<1 ){ - *piEst = 50/SQLITE_INDEX_SAMPLES; - }else{ - *piEst = (iEst*100)/SQLITE_INDEX_SAMPLES; - } - sqlite3ValueFree(pLowerVal); - sqlite3ValueFree(pUpperVal); - return rc; + i = yy_reduce_ofst[stateno]; + assert( i!=YY_REDUCE_USE_DFLT ); + assert( iLookAhead!=YYNOCODE ); + i += iLookAhead; +#ifdef YYERRORSYMBOL + if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ + return yy_default[stateno]; } -range_est_fallback: #else - UNUSED_PARAMETER(pParse); - UNUSED_PARAMETER(p); - UNUSED_PARAMETER(nEq); + assert( i>=0 && iwtFlags & TERM_VNULL)==0 ) *piEst /= 4; - if( pUpper ) *piEst /= 4; - return rc; + return yy_action[i]; } -#ifdef SQLITE_ENABLE_STAT2 /* -** Estimate the number of rows that will be returned based on -** an equality constraint x=VALUE and where that VALUE occurs in -** the histogram data. This only works when x is the left-most -** column of an index and sqlite_stat2 histogram data is available -** for that index. When pExpr==NULL that means the constraint is -** "x IS NULL" instead of "x=VALUE". -** -** Write the estimated row count into *pnRow and return SQLITE_OK. -** If unable to make an estimate, leave *pnRow unchanged and return -** non-zero. -** -** This routine can fail if it is unable to load a collating sequence -** required for string comparison, or if unable to allocate memory -** for a UTF conversion required for comparison. The error is stored -** in the pParse structure. +** The following routine is called if the stack overflows. */ -static int whereEqualScanEst( - Parse *pParse, /* Parsing & code generating context */ - Index *p, /* The index whose left-most column is pTerm */ - Expr *pExpr, /* Expression for VALUE in the x=VALUE constraint */ - double *pnRow /* Write the revised row estimate here */ -){ - sqlite3_value *pRhs = 0; /* VALUE on right-hand side of pTerm */ - int iLower, iUpper; /* Range of histogram regions containing pRhs */ - u8 aff; /* Column affinity */ - int rc; /* Subfunction return code */ - double nRowEst; /* New estimate of the number of rows */ - - assert( p->aSample!=0 ); - aff = p->pTable->aCol[p->aiColumn[0]].affinity; - if( pExpr ){ - rc = valueFromExpr(pParse, pExpr, aff, &pRhs); - if( rc ) goto whereEqualScanEst_cancel; - }else{ - pRhs = sqlite3ValueNew(pParse->db); - } - if( pRhs==0 ) return SQLITE_NOTFOUND; - rc = whereRangeRegion(pParse, p, pRhs, 0, &iLower); - if( rc ) goto whereEqualScanEst_cancel; - rc = whereRangeRegion(pParse, p, pRhs, 1, &iUpper); - if( rc ) goto whereEqualScanEst_cancel; - WHERETRACE(("equality scan regions: %d..%d\n", iLower, iUpper)); - if( iLower>=iUpper ){ - nRowEst = p->aiRowEst[0]/(SQLITE_INDEX_SAMPLES*2); - if( nRowEst<*pnRow ) *pnRow = nRowEst; - }else{ - nRowEst = (iUpper-iLower)*p->aiRowEst[0]/SQLITE_INDEX_SAMPLES; - *pnRow = nRowEst; - } +static void yyStackOverflow(yyParser *yypParser, YYMINORTYPE *yypMinor){ + sqlite3ParserARG_FETCH; + yypParser->yyidx--; +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt); + } +#endif + while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser); + /* Here code is inserted which will execute if the parser + ** stack every overflows */ -whereEqualScanEst_cancel: - sqlite3ValueFree(pRhs); - return rc; + UNUSED_PARAMETER(yypMinor); /* Silence some compiler warnings */ + sqlite3ErrorMsg(pParse, "parser stack overflow"); + sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ } -#endif /* defined(SQLITE_ENABLE_STAT2) */ -#ifdef SQLITE_ENABLE_STAT2 /* -** Estimate the number of rows that will be returned based on -** an IN constraint where the right-hand side of the IN operator -** is a list of values. Example: -** -** WHERE x IN (1,2,3,4) -** -** Write the estimated row count into *pnRow and return SQLITE_OK. -** If unable to make an estimate, leave *pnRow unchanged and return -** non-zero. -** -** This routine can fail if it is unable to load a collating sequence -** required for string comparison, or if unable to allocate memory -** for a UTF conversion required for comparison. The error is stored -** in the pParse structure. +** Perform a shift action. */ -static int whereInScanEst( - Parse *pParse, /* Parsing & code generating context */ - Index *p, /* The index whose left-most column is pTerm */ - ExprList *pList, /* The value list on the RHS of "x IN (v1,v2,v3,...)" */ - double *pnRow /* Write the revised row estimate here */ +static void yy_shift( + yyParser *yypParser, /* The parser to be shifted */ + int yyNewState, /* The new state to shift in */ + int yyMajor, /* The major token to shift in */ + YYMINORTYPE *yypMinor /* Pointer to the minor token to shift in */ ){ - sqlite3_value *pVal = 0; /* One value from list */ - int iLower, iUpper; /* Range of histogram regions containing pRhs */ - u8 aff; /* Column affinity */ - int rc = SQLITE_OK; /* Subfunction return code */ - double nRowEst; /* New estimate of the number of rows */ - int nSpan = 0; /* Number of histogram regions spanned */ - int nSingle = 0; /* Histogram regions hit by a single value */ - int nNotFound = 0; /* Count of values that are not constants */ - int i; /* Loop counter */ - u8 aSpan[SQLITE_INDEX_SAMPLES+1]; /* Histogram regions that are spanned */ - u8 aSingle[SQLITE_INDEX_SAMPLES+1]; /* Histogram regions hit once */ - - assert( p->aSample!=0 ); - aff = p->pTable->aCol[p->aiColumn[0]].affinity; - memset(aSpan, 0, sizeof(aSpan)); - memset(aSingle, 0, sizeof(aSingle)); - for(i=0; inExpr; i++){ - sqlite3ValueFree(pVal); - rc = valueFromExpr(pParse, pList->a[i].pExpr, aff, &pVal); - if( rc ) break; - if( pVal==0 || sqlite3_value_type(pVal)==SQLITE_NULL ){ - nNotFound++; - continue; - } - rc = whereRangeRegion(pParse, p, pVal, 0, &iLower); - if( rc ) break; - rc = whereRangeRegion(pParse, p, pVal, 1, &iUpper); - if( rc ) break; - if( iLower>=iUpper ){ - aSingle[iLower] = 1; - }else{ - assert( iLower>=0 && iUpper<=SQLITE_INDEX_SAMPLES ); - while( iLoweryyidx++; +#ifdef YYTRACKMAXSTACKDEPTH + if( yypParser->yyidx>yypParser->yyidxMax ){ + yypParser->yyidxMax = yypParser->yyidx; } - if( rc==SQLITE_OK ){ - for(i=nSpan=0; i<=SQLITE_INDEX_SAMPLES; i++){ - if( aSpan[i] ){ - nSpan++; - }else if( aSingle[i] ){ - nSingle++; - } +#endif +#if YYSTACKDEPTH>0 + if( yypParser->yyidx>=YYSTACKDEPTH ){ + yyStackOverflow(yypParser, yypMinor); + return; + } +#else + if( yypParser->yyidx>=yypParser->yystksz ){ + yyGrowStack(yypParser); + if( yypParser->yyidx>=yypParser->yystksz ){ + yyStackOverflow(yypParser, yypMinor); + return; } - nRowEst = (nSpan*2+nSingle)*p->aiRowEst[0]/(2*SQLITE_INDEX_SAMPLES) - + nNotFound*p->aiRowEst[1]; - if( nRowEst > p->aiRowEst[0] ) nRowEst = p->aiRowEst[0]; - *pnRow = nRowEst; - WHERETRACE(("IN row estimate: nSpan=%d, nSingle=%d, nNotFound=%d, est=%g\n", - nSpan, nSingle, nNotFound, nRowEst)); } - sqlite3ValueFree(pVal); - return rc; +#endif + yytos = &yypParser->yystack[yypParser->yyidx]; + yytos->stateno = (YYACTIONTYPE)yyNewState; + yytos->major = (YYCODETYPE)yyMajor; + yytos->minor = *yypMinor; +#ifndef NDEBUG + if( yyTraceFILE && yypParser->yyidx>0 ){ + int i; + fprintf(yyTraceFILE,"%sShift %d\n",yyTracePrompt,yyNewState); + fprintf(yyTraceFILE,"%sStack:",yyTracePrompt); + for(i=1; i<=yypParser->yyidx; i++) + fprintf(yyTraceFILE," %s",yyTokenName[yypParser->yystack[i].major]); + fprintf(yyTraceFILE,"\n"); + } +#endif } -#endif /* defined(SQLITE_ENABLE_STAT2) */ - -/* -** Find the best query plan for accessing a particular table. Write the -** best query plan and its cost into the WhereCost object supplied as the -** last parameter. -** -** The lowest cost plan wins. The cost is an estimate of the amount of -** CPU and disk I/O needed to process the requested result. -** Factors that influence cost include: -** -** * The estimated number of rows that will be retrieved. (The -** fewer the better.) -** -** * Whether or not sorting must occur. -** -** * Whether or not there must be separate lookups in the -** index and in the main table. -** -** If there was an INDEXED BY clause (pSrc->pIndex) attached to the table in -** the SQL statement, then this function only considers plans using the -** named index. If no such plan is found, then the returned cost is -** SQLITE_BIG_DBL. If a plan is found that uses the named index, -** then the cost is calculated in the usual way. -** -** If a NOT INDEXED clause (pSrc->notIndexed!=0) was attached to the table -** in the SELECT statement, then no indexes are considered. However, the -** selected plan may still take advantage of the built-in rowid primary key -** index. +/* The following table contains information about every rule that +** is used during the reduce. */ -static void bestBtreeIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to search */ - Bitmask notReady, /* Mask of cursors not available for indexing */ - Bitmask notValid, /* Cursors not available for any purpose */ - ExprList *pOrderBy, /* The ORDER BY clause */ - WhereCost *pCost /* Lowest cost query plan */ -){ - int iCur = pSrc->iCursor; /* The cursor of the table to be accessed */ - Index *pProbe; /* An index we are evaluating */ - Index *pIdx; /* Copy of pProbe, or zero for IPK index */ - int eqTermMask; /* Current mask of valid equality operators */ - int idxEqTermMask; /* Index mask of valid equality operators */ - Index sPk; /* A fake index object for the primary key */ - unsigned int aiRowEstPk[2]; /* The aiRowEst[] value for the sPk index */ - int aiColumnPk = -1; /* The aColumn[] value for the sPk index */ - int wsFlagMask; /* Allowed flags in pCost->plan.wsFlag */ - - /* Initialize the cost to a worst-case value */ - memset(pCost, 0, sizeof(*pCost)); - pCost->rCost = SQLITE_BIG_DBL; - - /* If the pSrc table is the right table of a LEFT JOIN then we may not - ** use an index to satisfy IS NULL constraints on that table. This is - ** because columns might end up being NULL if the table does not match - - ** a circumstance which the index cannot help us discover. Ticket #2177. - */ - if( pSrc->jointype & JT_LEFT ){ - idxEqTermMask = WO_EQ|WO_IN; - }else{ - idxEqTermMask = WO_EQ|WO_IN|WO_ISNULL; - } - - if( pSrc->pIndex ){ - /* An INDEXED BY clause specifies a particular index to use */ - pIdx = pProbe = pSrc->pIndex; - wsFlagMask = ~(WHERE_ROWID_EQ|WHERE_ROWID_RANGE); - eqTermMask = idxEqTermMask; - }else{ - /* There is no INDEXED BY clause. Create a fake Index object in local - ** variable sPk to represent the rowid primary key index. Make this - ** fake index the first in a chain of Index objects with all of the real - ** indices to follow */ - Index *pFirst; /* First of real indices on the table */ - memset(&sPk, 0, sizeof(Index)); - sPk.nColumn = 1; - sPk.aiColumn = &aiColumnPk; - sPk.aiRowEst = aiRowEstPk; - sPk.onError = OE_Replace; - sPk.pTable = pSrc->pTab; - aiRowEstPk[0] = pSrc->pTab->nRowEst; - aiRowEstPk[1] = 1; - pFirst = pSrc->pTab->pIndex; - if( pSrc->notIndexed==0 ){ - /* The real indices of the table are only considered if the - ** NOT INDEXED qualifier is omitted from the FROM clause */ - sPk.pNext = pFirst; - } - pProbe = &sPk; - wsFlagMask = ~( - WHERE_COLUMN_IN|WHERE_COLUMN_EQ|WHERE_COLUMN_NULL|WHERE_COLUMN_RANGE - ); - eqTermMask = WO_EQ|WO_IN; - pIdx = 0; - } - - /* Loop over all indices looking for the best one to use - */ - for(; pProbe; pIdx=pProbe=pProbe->pNext){ - const unsigned int * const aiRowEst = pProbe->aiRowEst; - double cost; /* Cost of using pProbe */ - double nRow; /* Estimated number of rows in result set */ - double log10N; /* base-10 logarithm of nRow (inexact) */ - int rev; /* True to scan in reverse order */ - int wsFlags = 0; - Bitmask used = 0; - - /* The following variables are populated based on the properties of - ** index being evaluated. They are then used to determine the expected - ** cost and number of rows returned. - ** - ** nEq: - ** Number of equality terms that can be implemented using the index. - ** In other words, the number of initial fields in the index that - ** are used in == or IN or NOT NULL constraints of the WHERE clause. - ** - ** nInMul: - ** The "in-multiplier". This is an estimate of how many seek operations - ** SQLite must perform on the index in question. For example, if the - ** WHERE clause is: - ** - ** WHERE a IN (1, 2, 3) AND b IN (4, 5, 6) - ** - ** SQLite must perform 9 lookups on an index on (a, b), so nInMul is - ** set to 9. Given the same schema and either of the following WHERE - ** clauses: - ** - ** WHERE a = 1 - ** WHERE a >= 2 - ** - ** nInMul is set to 1. - ** - ** If there exists a WHERE term of the form "x IN (SELECT ...)", then - ** the sub-select is assumed to return 25 rows for the purposes of - ** determining nInMul. - ** - ** bInEst: - ** Set to true if there was at least one "x IN (SELECT ...)" term used - ** in determining the value of nInMul. Note that the RHS of the - ** IN operator must be a SELECT, not a value list, for this variable - ** to be true. - ** - ** estBound: - ** An estimate on the amount of the table that must be searched. A - ** value of 100 means the entire table is searched. Range constraints - ** might reduce this to a value less than 100 to indicate that only - ** a fraction of the table needs searching. In the absence of - ** sqlite_stat2 ANALYZE data, a single inequality reduces the search - ** space to 1/4rd its original size. So an x>? constraint reduces - ** estBound to 25. Two constraints (x>? AND xnColumn; nEq++){ - int j = pProbe->aiColumn[nEq]; - pTerm = findTerm(pWC, iCur, j, notReady, eqTermMask, pIdx); - if( pTerm==0 ) break; - wsFlags |= (WHERE_COLUMN_EQ|WHERE_ROWID_EQ); - if( pTerm->eOperator & WO_IN ){ - Expr *pExpr = pTerm->pExpr; - wsFlags |= WHERE_COLUMN_IN; - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - /* "x IN (SELECT ...)": Assume the SELECT returns 25 rows */ - nInMul *= 25; - bInEst = 1; - }else if( ALWAYS(pExpr->x.pList && pExpr->x.pList->nExpr) ){ - /* "x IN (value, value, ...)" */ - nInMul *= pExpr->x.pList->nExpr; - } - }else if( pTerm->eOperator & WO_ISNULL ){ - wsFlags |= WHERE_COLUMN_NULL; - } -#ifdef SQLITE_ENABLE_STAT2 - if( nEq==0 && pProbe->aSample ) pFirstTerm = pTerm; -#endif - used |= pTerm->prereqRight; - } - - /* Determine the value of estBound. */ - if( nEqnColumn && pProbe->bUnordered==0 ){ - int j = pProbe->aiColumn[nEq]; - if( findTerm(pWC, iCur, j, notReady, WO_LT|WO_LE|WO_GT|WO_GE, pIdx) ){ - WhereTerm *pTop = findTerm(pWC, iCur, j, notReady, WO_LT|WO_LE, pIdx); - WhereTerm *pBtm = findTerm(pWC, iCur, j, notReady, WO_GT|WO_GE, pIdx); - whereRangeScanEst(pParse, pProbe, nEq, pBtm, pTop, &estBound); - if( pTop ){ - nBound = 1; - wsFlags |= WHERE_TOP_LIMIT; - used |= pTop->prereqRight; - } - if( pBtm ){ - nBound++; - wsFlags |= WHERE_BTM_LIMIT; - used |= pBtm->prereqRight; - } - wsFlags |= (WHERE_COLUMN_RANGE|WHERE_ROWID_RANGE); - } - }else if( pProbe->onError!=OE_None ){ - testcase( wsFlags & WHERE_COLUMN_IN ); - testcase( wsFlags & WHERE_COLUMN_NULL ); - if( (wsFlags & (WHERE_COLUMN_IN|WHERE_COLUMN_NULL))==0 ){ - wsFlags |= WHERE_UNIQUE; - } - } - - /* If there is an ORDER BY clause and the index being considered will - ** naturally scan rows in the required order, set the appropriate flags - ** in wsFlags. Otherwise, if there is an ORDER BY clause but the index - ** will scan rows in a different order, set the bSort variable. */ - if( pOrderBy ){ - if( (wsFlags & WHERE_COLUMN_IN)==0 - && pProbe->bUnordered==0 - && isSortingIndex(pParse, pWC->pMaskSet, pProbe, iCur, pOrderBy, - nEq, wsFlags, &rev) - ){ - wsFlags |= WHERE_ROWID_RANGE|WHERE_COLUMN_RANGE|WHERE_ORDERBY; - wsFlags |= (rev ? WHERE_REVERSE : 0); - }else{ - bSort = 1; - } - } - - /* If currently calculating the cost of using an index (not the IPK - ** index), determine if all required column data may be obtained without - ** using the main table (i.e. if the index is a covering - ** index for this query). If it is, set the WHERE_IDX_ONLY flag in - ** wsFlags. Otherwise, set the bLookup variable to true. */ - if( pIdx && wsFlags ){ - Bitmask m = pSrc->colUsed; - int j; - for(j=0; jnColumn; j++){ - int x = pIdx->aiColumn[j]; - if( xaiRowEst[0] ){ - nRow = aiRowEst[0]/2; - nInMul = (int)(nRow / aiRowEst[nEq]); - } - -#ifdef SQLITE_ENABLE_STAT2 - /* If the constraint is of the form x=VALUE and histogram - ** data is available for column x, then it might be possible - ** to get a better estimate on the number of rows based on - ** VALUE and how common that value is according to the histogram. - */ - if( nRow>(double)1 && nEq==1 && pFirstTerm!=0 ){ - if( pFirstTerm->eOperator & (WO_EQ|WO_ISNULL) ){ - testcase( pFirstTerm->eOperator==WO_EQ ); - testcase( pFirstTerm->eOperator==WO_ISNULL ); - whereEqualScanEst(pParse, pProbe, pFirstTerm->pExpr->pRight, &nRow); - }else if( pFirstTerm->eOperator==WO_IN && bInEst==0 ){ - whereInScanEst(pParse, pProbe, pFirstTerm->pExpr->x.pList, &nRow); - } - } -#endif /* SQLITE_ENABLE_STAT2 */ - - /* Adjust the number of output rows and downward to reflect rows - ** that are excluded by range constraints. - */ - nRow = (nRow * (double)estBound) / (double)100; - if( nRow<1 ) nRow = 1; - - /* Experiments run on real SQLite databases show that the time needed - ** to do a binary search to locate a row in a table or index is roughly - ** log10(N) times the time to move from one row to the next row within - ** a table or index. The actual times can vary, with the size of - ** records being an important factor. Both moves and searches are - ** slower with larger records, presumably because fewer records fit - ** on one page and hence more pages have to be fetched. - ** - ** The ANALYZE command and the sqlite_stat1 and sqlite_stat2 tables do - ** not give us data on the relative sizes of table and index records. - ** So this computation assumes table records are about twice as big - ** as index records - */ - if( (wsFlags & WHERE_NOT_FULLSCAN)==0 ){ - /* The cost of a full table scan is a number of move operations equal - ** to the number of rows in the table. - ** - ** We add an additional 4x penalty to full table scans. This causes - ** the cost function to err on the side of choosing an index over - ** choosing a full scan. This 4x full-scan penalty is an arguable - ** decision and one which we expect to revisit in the future. But - ** it seems to be working well enough at the moment. - */ - cost = aiRowEst[0]*4; - }else{ - log10N = estLog(aiRowEst[0]); - cost = nRow; - if( pIdx ){ - if( bLookup ){ - /* For an index lookup followed by a table lookup: - ** nInMul index searches to find the start of each index range - ** + nRow steps through the index - ** + nRow table searches to lookup the table entry using the rowid - */ - cost += (nInMul + nRow)*log10N; - }else{ - /* For a covering index: - ** nInMul index searches to find the initial entry - ** + nRow steps through the index - */ - cost += nInMul*log10N; - } - }else{ - /* For a rowid primary key lookup: - ** nInMult table searches to find the initial entry for each range - ** + nRow steps through the table - */ - cost += nInMul*log10N; - } - } - - /* Add in the estimated cost of sorting the result. Actual experimental - ** measurements of sorting performance in SQLite show that sorting time - ** adds C*N*log10(N) to the cost, where N is the number of rows to be - ** sorted and C is a factor between 1.95 and 4.3. We will split the - ** difference and select C of 3.0. - */ - if( bSort ){ - cost += nRow*estLog(nRow)*3; - } - - /**** Cost of using this index has now been computed ****/ - - /* If there are additional constraints on this table that cannot - ** be used with the current index, but which might lower the number - ** of output rows, adjust the nRow value accordingly. This only - ** matters if the current index is the least costly, so do not bother - ** with this step if we already know this index will not be chosen. - ** Also, never reduce the output row count below 2 using this step. - ** - ** It is critical that the notValid mask be used here instead of - ** the notReady mask. When computing an "optimal" index, the notReady - ** mask will only have one bit set - the bit for the current table. - ** The notValid mask, on the other hand, always has all bits set for - ** tables that are not in outer loops. If notReady is used here instead - ** of notValid, then a optimal index that depends on inner joins loops - ** might be selected even when there exists an optimal index that has - ** no such dependency. - */ - if( nRow>2 && cost<=pCost->rCost ){ - int k; /* Loop counter */ - int nSkipEq = nEq; /* Number of == constraints to skip */ - int nSkipRange = nBound; /* Number of < constraints to skip */ - Bitmask thisTab; /* Bitmap for pSrc */ - - thisTab = getMask(pWC->pMaskSet, iCur); - for(pTerm=pWC->a, k=pWC->nTerm; nRow>2 && k; k--, pTerm++){ - if( pTerm->wtFlags & TERM_VIRTUAL ) continue; - if( (pTerm->prereqAll & notValid)!=thisTab ) continue; - if( pTerm->eOperator & (WO_EQ|WO_IN|WO_ISNULL) ){ - if( nSkipEq ){ - /* Ignore the first nEq equality matches since the index - ** has already accounted for these */ - nSkipEq--; - }else{ - /* Assume each additional equality match reduces the result - ** set size by a factor of 10 */ - nRow /= 10; - } - }else if( pTerm->eOperator & (WO_LT|WO_LE|WO_GT|WO_GE) ){ - if( nSkipRange ){ - /* Ignore the first nSkipRange range constraints since the index - ** has already accounted for these */ - nSkipRange--; - }else{ - /* Assume each additional range constraint reduces the result - ** set size by a factor of 3. Indexed range constraints reduce - ** the search space by a larger factor: 4. We make indexed range - ** more selective intentionally because of the subjective - ** observation that indexed range constraints really are more - ** selective in practice, on average. */ - nRow /= 3; - } - }else if( pTerm->eOperator!=WO_NOOP ){ - /* Any other expression lowers the output row count by half */ - nRow /= 2; - } - } - if( nRow<2 ) nRow = 2; - } - - - WHERETRACE(( - "%s(%s): nEq=%d nInMul=%d estBound=%d bSort=%d bLookup=%d wsFlags=0x%x\n" - " notReady=0x%llx log10N=%.1f nRow=%.1f cost=%.1f used=0x%llx\n", - pSrc->pTab->zName, (pIdx ? pIdx->zName : "ipk"), - nEq, nInMul, estBound, bSort, bLookup, wsFlags, - notReady, log10N, nRow, cost, used - )); - - /* If this index is the best we have seen so far, then record this - ** index and its cost in the pCost structure. - */ - if( (!pIdx || wsFlags) - && (costrCost || (cost<=pCost->rCost && nRowplan.nRow)) - ){ - pCost->rCost = cost; - pCost->used = used; - pCost->plan.nRow = nRow; - pCost->plan.wsFlags = (wsFlags&wsFlagMask); - pCost->plan.nEq = nEq; - pCost->plan.u.pIdx = pIdx; - } +static const struct { + YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ + unsigned char nrhs; /* Number of right-hand side symbols in the rule */ +} yyRuleInfo[] = { + { 144, 1 }, + { 145, 2 }, + { 145, 1 }, + { 146, 1 }, + { 146, 3 }, + { 147, 0 }, + { 147, 1 }, + { 147, 3 }, + { 148, 1 }, + { 149, 3 }, + { 151, 0 }, + { 151, 1 }, + { 151, 2 }, + { 150, 0 }, + { 150, 1 }, + { 150, 1 }, + { 150, 1 }, + { 149, 2 }, + { 149, 2 }, + { 149, 2 }, + { 153, 1 }, + { 153, 0 }, + { 149, 2 }, + { 149, 3 }, + { 149, 5 }, + { 149, 2 }, + { 154, 6 }, + { 156, 1 }, + { 158, 0 }, + { 158, 3 }, + { 157, 1 }, + { 157, 0 }, + { 155, 5 }, + { 155, 2 }, + { 162, 0 }, + { 162, 2 }, + { 160, 3 }, + { 160, 1 }, + { 164, 3 }, + { 165, 1 }, + { 152, 1 }, + { 152, 1 }, + { 152, 1 }, + { 166, 0 }, + { 166, 1 }, + { 168, 1 }, + { 168, 4 }, + { 168, 6 }, + { 169, 1 }, + { 169, 2 }, + { 170, 1 }, + { 170, 1 }, + { 167, 2 }, + { 167, 0 }, + { 173, 2 }, + { 173, 2 }, + { 173, 4 }, + { 173, 3 }, + { 173, 3 }, + { 173, 2 }, + { 173, 2 }, + { 173, 3 }, + { 173, 5 }, + { 173, 2 }, + { 173, 4 }, + { 173, 4 }, + { 173, 1 }, + { 173, 2 }, + { 178, 0 }, + { 178, 1 }, + { 180, 0 }, + { 180, 2 }, + { 182, 2 }, + { 182, 3 }, + { 182, 3 }, + { 182, 3 }, + { 183, 2 }, + { 183, 2 }, + { 183, 1 }, + { 183, 1 }, + { 183, 2 }, + { 181, 3 }, + { 181, 2 }, + { 184, 0 }, + { 184, 2 }, + { 184, 2 }, + { 161, 0 }, + { 161, 2 }, + { 185, 3 }, + { 185, 1 }, + { 186, 1 }, + { 186, 0 }, + { 187, 2 }, + { 187, 7 }, + { 187, 5 }, + { 187, 5 }, + { 187, 10 }, + { 189, 0 }, + { 189, 1 }, + { 176, 0 }, + { 176, 3 }, + { 190, 0 }, + { 190, 2 }, + { 191, 1 }, + { 191, 1 }, + { 191, 1 }, + { 149, 4 }, + { 193, 2 }, + { 193, 0 }, + { 149, 8 }, + { 149, 4 }, + { 149, 1 }, + { 163, 2 }, + { 195, 1 }, + { 195, 3 }, + { 198, 1 }, + { 198, 2 }, + { 198, 1 }, + { 196, 9 }, + { 196, 1 }, + { 207, 4 }, + { 207, 5 }, + { 199, 1 }, + { 199, 1 }, + { 199, 0 }, + { 210, 2 }, + { 210, 0 }, + { 200, 3 }, + { 200, 2 }, + { 200, 4 }, + { 211, 2 }, + { 211, 1 }, + { 211, 0 }, + { 201, 0 }, + { 201, 2 }, + { 213, 2 }, + { 213, 0 }, + { 212, 7 }, + { 212, 7 }, + { 212, 7 }, + { 159, 0 }, + { 159, 2 }, + { 194, 2 }, + { 214, 1 }, + { 214, 2 }, + { 214, 3 }, + { 214, 4 }, + { 216, 2 }, + { 216, 0 }, + { 215, 0 }, + { 215, 3 }, + { 215, 2 }, + { 217, 4 }, + { 217, 0 }, + { 205, 0 }, + { 205, 3 }, + { 220, 4 }, + { 220, 2 }, + { 177, 1 }, + { 177, 1 }, + { 177, 0 }, + { 203, 0 }, + { 203, 3 }, + { 204, 0 }, + { 204, 2 }, + { 206, 0 }, + { 206, 2 }, + { 206, 4 }, + { 206, 4 }, + { 149, 6 }, + { 202, 0 }, + { 202, 2 }, + { 149, 8 }, + { 221, 5 }, + { 221, 3 }, + { 149, 6 }, + { 149, 7 }, + { 222, 2 }, + { 222, 1 }, + { 223, 0 }, + { 223, 3 }, + { 219, 3 }, + { 219, 1 }, + { 175, 1 }, + { 175, 3 }, + { 174, 1 }, + { 175, 1 }, + { 175, 1 }, + { 175, 3 }, + { 175, 5 }, + { 174, 1 }, + { 174, 1 }, + { 175, 1 }, + { 175, 3 }, + { 175, 6 }, + { 175, 5 }, + { 175, 4 }, + { 174, 1 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 175, 3 }, + { 224, 1 }, + { 224, 2 }, + { 175, 3 }, + { 175, 5 }, + { 175, 2 }, + { 175, 3 }, + { 175, 3 }, + { 175, 4 }, + { 175, 2 }, + { 175, 2 }, + { 175, 2 }, + { 175, 2 }, + { 225, 1 }, + { 225, 2 }, + { 175, 5 }, + { 226, 1 }, + { 226, 2 }, + { 175, 5 }, + { 175, 3 }, + { 175, 5 }, + { 175, 4 }, + { 175, 4 }, + { 175, 5 }, + { 228, 5 }, + { 228, 4 }, + { 229, 2 }, + { 229, 0 }, + { 227, 1 }, + { 227, 0 }, + { 209, 1 }, + { 209, 0 }, + { 208, 3 }, + { 208, 1 }, + { 149, 12 }, + { 230, 1 }, + { 230, 0 }, + { 179, 0 }, + { 179, 3 }, + { 188, 5 }, + { 188, 3 }, + { 231, 0 }, + { 231, 2 }, + { 149, 4 }, + { 149, 1 }, + { 149, 2 }, + { 149, 3 }, + { 149, 5 }, + { 149, 6 }, + { 149, 5 }, + { 149, 6 }, + { 232, 1 }, + { 232, 1 }, + { 232, 1 }, + { 232, 1 }, + { 232, 1 }, + { 171, 2 }, + { 171, 1 }, + { 172, 2 }, + { 149, 5 }, + { 233, 11 }, + { 235, 1 }, + { 235, 1 }, + { 235, 2 }, + { 235, 0 }, + { 236, 1 }, + { 236, 1 }, + { 236, 3 }, + { 237, 0 }, + { 237, 3 }, + { 238, 0 }, + { 238, 2 }, + { 234, 3 }, + { 234, 2 }, + { 240, 1 }, + { 240, 3 }, + { 241, 0 }, + { 241, 3 }, + { 241, 2 }, + { 239, 7 }, + { 239, 5 }, + { 239, 5 }, + { 239, 1 }, + { 175, 4 }, + { 175, 6 }, + { 192, 1 }, + { 192, 1 }, + { 192, 1 }, + { 149, 4 }, + { 149, 6 }, + { 149, 3 }, + { 243, 0 }, + { 243, 2 }, + { 242, 1 }, + { 242, 0 }, + { 149, 1 }, + { 149, 3 }, + { 149, 1 }, + { 149, 3 }, + { 149, 6 }, + { 149, 6 }, + { 244, 1 }, + { 245, 0 }, + { 245, 1 }, + { 149, 1 }, + { 149, 4 }, + { 246, 8 }, + { 247, 1 }, + { 247, 3 }, + { 248, 0 }, + { 248, 2 }, + { 249, 1 }, + { 249, 3 }, + { 250, 1 }, + { 251, 0 }, + { 251, 4 }, + { 251, 2 }, + { 197, 0 }, + { 197, 2 }, + { 197, 3 }, + { 252, 6 }, + { 252, 8 }, +}; - /* If there was an INDEXED BY clause, then only that one index is - ** considered. */ - if( pSrc->pIndex ) break; +static void yy_accept(yyParser*); /* Forward Declaration */ - /* Reset masks for the next index in the loop */ - wsFlagMask = ~(WHERE_ROWID_EQ|WHERE_ROWID_RANGE); - eqTermMask = idxEqTermMask; +/* +** Perform a reduce action and the shift that must immediately +** follow the reduce. +*/ +static void yy_reduce( + yyParser *yypParser, /* The parser */ + int yyruleno /* Number of the rule by which to reduce */ +){ + int yygoto; /* The next state */ + int yyact; /* The next action */ + YYMINORTYPE yygotominor; /* The LHS of the rule reduced */ + yyStackEntry *yymsp; /* The top of the parser's stack */ + int yysize; /* Amount to pop the stack */ + sqlite3ParserARG_FETCH; + yymsp = &yypParser->yystack[yypParser->yyidx]; +#ifndef NDEBUG + if( yyTraceFILE && yyruleno>=0 + && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){ + fprintf(yyTraceFILE, "%sReduce [%s].\n", yyTracePrompt, + yyRuleName[yyruleno]); } +#endif /* NDEBUG */ - /* If there is no ORDER BY clause and the SQLITE_ReverseOrder flag - ** is set, then reverse the order that the index will be scanned - ** in. This is used for application testing, to help find cases - ** where application behaviour depends on the (undefined) order that - ** SQLite outputs rows in in the absence of an ORDER BY clause. */ - if( !pOrderBy && pParse->db->flags & SQLITE_ReverseOrder ){ - pCost->plan.wsFlags |= WHERE_REVERSE; - } + /* Silence complaints from purify about yygotominor being uninitialized + ** in some cases when it is copied into the stack after the following + ** switch. yygotominor is uninitialized when a rule reduces that does + ** not set the value of its left-hand side nonterminal. Leaving the + ** value of the nonterminal uninitialized is utterly harmless as long + ** as the value is never used. So really the only thing this code + ** accomplishes is to quieten purify. + ** + ** 2007-01-16: The wireshark project (www.wireshark.org) reports that + ** without this code, their parser segfaults. I'm not sure what there + ** parser is doing to make this happen. This is the second bug report + ** from wireshark this week. Clearly they are stressing Lemon in ways + ** that it has not been previously stressed... (SQLite ticket #2172) + */ + /*memset(&yygotominor, 0, sizeof(yygotominor));*/ + yygotominor = yyzerominor; - assert( pOrderBy || (pCost->plan.wsFlags&WHERE_ORDERBY)==0 ); - assert( pCost->plan.u.pIdx==0 || (pCost->plan.wsFlags&WHERE_ROWID_EQ)==0 ); - assert( pSrc->pIndex==0 - || pCost->plan.u.pIdx==0 - || pCost->plan.u.pIdx==pSrc->pIndex - ); - WHERETRACE(("best index is: %s\n", - ((pCost->plan.wsFlags & WHERE_NOT_FULLSCAN)==0 ? "none" : - pCost->plan.u.pIdx ? pCost->plan.u.pIdx->zName : "ipk") - )); - - bestOrClauseIndex(pParse, pWC, pSrc, notReady, notValid, pOrderBy, pCost); - bestAutomaticIndex(pParse, pWC, pSrc, notReady, pCost); - pCost->plan.wsFlags |= eqTermMask; + switch( yyruleno ){ + /* Beginning here are the reduction cases. A typical example + ** follows: + ** case 0: + ** #line + ** { ... } // User supplied code + ** #line + ** break; + */ + case 5: /* explain ::= */ +{ sqlite3BeginParse(pParse, 0); } + break; + case 6: /* explain ::= EXPLAIN */ +{ sqlite3BeginParse(pParse, 1); } + break; + case 7: /* explain ::= EXPLAIN QUERY PLAN */ +{ sqlite3BeginParse(pParse, 2); } + break; + case 8: /* cmdx ::= cmd */ +{ sqlite3FinishCoding(pParse); } + break; + case 9: /* cmd ::= BEGIN transtype trans_opt */ +{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy328);} + break; + case 13: /* transtype ::= */ +{yygotominor.yy328 = TK_DEFERRED;} + break; + case 14: /* transtype ::= DEFERRED */ + case 15: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==15); + case 16: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==16); + case 115: /* multiselect_op ::= UNION */ yytestcase(yyruleno==115); + case 117: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==117); +{yygotominor.yy328 = yymsp[0].major;} + break; + case 17: /* cmd ::= COMMIT trans_opt */ + case 18: /* cmd ::= END trans_opt */ yytestcase(yyruleno==18); +{sqlite3CommitTransaction(pParse);} + break; + case 19: /* cmd ::= ROLLBACK trans_opt */ +{sqlite3RollbackTransaction(pParse);} + break; + case 22: /* cmd ::= SAVEPOINT nm */ +{ + sqlite3Savepoint(pParse, SAVEPOINT_BEGIN, &yymsp[0].minor.yy0); } - -/* -** Find the query plan for accessing table pSrc->pTab. Write the -** best query plan and its cost into the WhereCost object supplied -** as the last parameter. This function may calculate the cost of -** both real and virtual table scans. -*/ -static void bestIndex( - Parse *pParse, /* The parsing context */ - WhereClause *pWC, /* The WHERE clause */ - struct SrcList_item *pSrc, /* The FROM clause term to search */ - Bitmask notReady, /* Mask of cursors not available for indexing */ - Bitmask notValid, /* Cursors not available for any purpose */ - ExprList *pOrderBy, /* The ORDER BY clause */ - WhereCost *pCost /* Lowest cost query plan */ -){ -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pSrc->pTab) ){ - sqlite3_index_info *p = 0; - bestVirtualIndex(pParse, pWC, pSrc, notReady, notValid, pOrderBy, pCost,&p); - if( p->needToFreeIdxStr ){ - sqlite3_free(p->idxStr); - } - sqlite3DbFree(pParse->db, p); - }else -#endif - { - bestBtreeIndex(pParse, pWC, pSrc, notReady, notValid, pOrderBy, pCost); + break; + case 23: /* cmd ::= RELEASE savepoint_opt nm */ +{ + sqlite3Savepoint(pParse, SAVEPOINT_RELEASE, &yymsp[0].minor.yy0); +} + break; + case 24: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ +{ + sqlite3Savepoint(pParse, SAVEPOINT_ROLLBACK, &yymsp[0].minor.yy0); +} + break; + case 26: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */ +{ + sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy328,0,0,yymsp[-2].minor.yy328); +} + break; + case 27: /* createkw ::= CREATE */ +{ + pParse->db->lookaside.bEnabled = 0; + yygotominor.yy0 = yymsp[0].minor.yy0; +} + break; + case 28: /* ifnotexists ::= */ + case 31: /* temp ::= */ yytestcase(yyruleno==31); + case 68: /* autoinc ::= */ yytestcase(yyruleno==68); + case 81: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ yytestcase(yyruleno==81); + case 83: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==83); + case 85: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ yytestcase(yyruleno==85); + case 97: /* defer_subclause_opt ::= */ yytestcase(yyruleno==97); + case 108: /* ifexists ::= */ yytestcase(yyruleno==108); + case 218: /* between_op ::= BETWEEN */ yytestcase(yyruleno==218); + case 221: /* in_op ::= IN */ yytestcase(yyruleno==221); +{yygotominor.yy328 = 0;} + break; + case 29: /* ifnotexists ::= IF NOT EXISTS */ + case 30: /* temp ::= TEMP */ yytestcase(yyruleno==30); + case 69: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==69); + case 84: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ yytestcase(yyruleno==84); + case 107: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==107); + case 219: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==219); + case 222: /* in_op ::= NOT IN */ yytestcase(yyruleno==222); +{yygotominor.yy328 = 1;} + break; + case 32: /* create_table_args ::= LP columnlist conslist_opt RP table_options */ +{ + sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy186,0); +} + break; + case 33: /* create_table_args ::= AS select */ +{ + sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy3); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy3); +} + break; + case 34: /* table_options ::= */ +{yygotominor.yy186 = 0;} + break; + case 35: /* table_options ::= WITHOUT nm */ +{ + if( yymsp[0].minor.yy0.n==5 && sqlite3_strnicmp(yymsp[0].minor.yy0.z,"rowid",5)==0 ){ + yygotominor.yy186 = TF_WithoutRowid; + }else{ + yygotominor.yy186 = 0; + sqlite3ErrorMsg(pParse, "unknown table option: %.*s", yymsp[0].minor.yy0.n, yymsp[0].minor.yy0.z); } } - -/* -** Disable a term in the WHERE clause. Except, do not disable the term -** if it controls a LEFT OUTER JOIN and it did not originate in the ON -** or USING clause of that join. -** -** Consider the term t2.z='ok' in the following queries: -** -** (1) SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x WHERE t2.z='ok' -** (2) SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x AND t2.z='ok' -** (3) SELECT * FROM t1, t2 WHERE t1.a=t2.x AND t2.z='ok' -** -** The t2.z='ok' is disabled in the in (2) because it originates -** in the ON clause. The term is disabled in (3) because it is not part -** of a LEFT OUTER JOIN. In (1), the term is not disabled. -** -** IMPLEMENTATION-OF: R-24597-58655 No tests are done for terms that are -** completely satisfied by indices. -** -** Disabling a term causes that term to not be tested in the inner loop -** of the join. Disabling is an optimization. When terms are satisfied -** by indices, we disable them to prevent redundant tests in the inner -** loop. We would get the correct results if nothing were ever disabled, -** but joins might run a little slower. The trick is to disable as much -** as we can without disabling too much. If we disabled in (1), we'd get -** the wrong answer. See ticket #813. -*/ -static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){ - if( pTerm - && (pTerm->wtFlags & TERM_CODED)==0 - && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin)) - ){ - pTerm->wtFlags |= TERM_CODED; - if( pTerm->iParent>=0 ){ - WhereTerm *pOther = &pTerm->pWC->a[pTerm->iParent]; - if( (--pOther->nChild)==0 ){ - disableTerm(pLevel, pOther); + break; + case 38: /* column ::= columnid type carglist */ +{ + yygotominor.yy0.z = yymsp[-2].minor.yy0.z; + yygotominor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-2].minor.yy0.z) + pParse->sLastToken.n; +} + break; + case 39: /* columnid ::= nm */ +{ + sqlite3AddColumn(pParse,&yymsp[0].minor.yy0); + yygotominor.yy0 = yymsp[0].minor.yy0; + pParse->constraintName.n = 0; +} + break; + case 40: /* nm ::= ID|INDEXED */ + case 41: /* nm ::= STRING */ yytestcase(yyruleno==41); + case 42: /* nm ::= JOIN_KW */ yytestcase(yyruleno==42); + case 45: /* typetoken ::= typename */ yytestcase(yyruleno==45); + case 48: /* typename ::= ID|STRING */ yytestcase(yyruleno==48); + case 130: /* as ::= AS nm */ yytestcase(yyruleno==130); + case 131: /* as ::= ID|STRING */ yytestcase(yyruleno==131); + case 141: /* dbnm ::= DOT nm */ yytestcase(yyruleno==141); + case 150: /* indexed_opt ::= INDEXED BY nm */ yytestcase(yyruleno==150); + case 247: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==247); + case 256: /* nmnum ::= plus_num */ yytestcase(yyruleno==256); + case 257: /* nmnum ::= nm */ yytestcase(yyruleno==257); + case 258: /* nmnum ::= ON */ yytestcase(yyruleno==258); + case 259: /* nmnum ::= DELETE */ yytestcase(yyruleno==259); + case 260: /* nmnum ::= DEFAULT */ yytestcase(yyruleno==260); + case 261: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==261); + case 262: /* plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==262); + case 263: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==263); + case 279: /* trnm ::= nm */ yytestcase(yyruleno==279); +{yygotominor.yy0 = yymsp[0].minor.yy0;} + break; + case 44: /* type ::= typetoken */ +{sqlite3AddColumnType(pParse,&yymsp[0].minor.yy0);} + break; + case 46: /* typetoken ::= typename LP signed RP */ +{ + yygotominor.yy0.z = yymsp[-3].minor.yy0.z; + yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-3].minor.yy0.z); +} + break; + case 47: /* typetoken ::= typename LP signed COMMA signed RP */ +{ + yygotominor.yy0.z = yymsp[-5].minor.yy0.z; + yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-5].minor.yy0.z); +} + break; + case 49: /* typename ::= typename ID|STRING */ +{yygotominor.yy0.z=yymsp[-1].minor.yy0.z; yygotominor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);} + break; + case 54: /* ccons ::= CONSTRAINT nm */ + case 92: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==92); +{pParse->constraintName = yymsp[0].minor.yy0;} + break; + case 55: /* ccons ::= DEFAULT term */ + case 57: /* ccons ::= DEFAULT PLUS term */ yytestcase(yyruleno==57); +{sqlite3AddDefaultValue(pParse,&yymsp[0].minor.yy346);} + break; + case 56: /* ccons ::= DEFAULT LP expr RP */ +{sqlite3AddDefaultValue(pParse,&yymsp[-1].minor.yy346);} + break; + case 58: /* ccons ::= DEFAULT MINUS term */ +{ + ExprSpan v; + v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy346.pExpr, 0, 0); + v.zStart = yymsp[-1].minor.yy0.z; + v.zEnd = yymsp[0].minor.yy346.zEnd; + sqlite3AddDefaultValue(pParse,&v); +} + break; + case 59: /* ccons ::= DEFAULT ID|INDEXED */ +{ + ExprSpan v; + spanExpr(&v, pParse, TK_STRING, &yymsp[0].minor.yy0); + sqlite3AddDefaultValue(pParse,&v); +} + break; + case 61: /* ccons ::= NOT NULL onconf */ +{sqlite3AddNotNull(pParse, yymsp[0].minor.yy328);} + break; + case 62: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */ +{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy328,yymsp[0].minor.yy328,yymsp[-2].minor.yy328);} + break; + case 63: /* ccons ::= UNIQUE onconf */ +{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy328,0,0,0,0);} + break; + case 64: /* ccons ::= CHECK LP expr RP */ +{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy346.pExpr);} + break; + case 65: /* ccons ::= REFERENCES nm idxlist_opt refargs */ +{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy14,yymsp[0].minor.yy328);} + break; + case 66: /* ccons ::= defer_subclause */ +{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy328);} + break; + case 67: /* ccons ::= COLLATE ID|STRING */ +{sqlite3AddCollateType(pParse, &yymsp[0].minor.yy0);} + break; + case 70: /* refargs ::= */ +{ yygotominor.yy328 = OE_None*0x0101; /* EV: R-19803-45884 */} + break; + case 71: /* refargs ::= refargs refarg */ +{ yygotominor.yy328 = (yymsp[-1].minor.yy328 & ~yymsp[0].minor.yy429.mask) | yymsp[0].minor.yy429.value; } + break; + case 72: /* refarg ::= MATCH nm */ + case 73: /* refarg ::= ON INSERT refact */ yytestcase(yyruleno==73); +{ yygotominor.yy429.value = 0; yygotominor.yy429.mask = 0x000000; } + break; + case 74: /* refarg ::= ON DELETE refact */ +{ yygotominor.yy429.value = yymsp[0].minor.yy328; yygotominor.yy429.mask = 0x0000ff; } + break; + case 75: /* refarg ::= ON UPDATE refact */ +{ yygotominor.yy429.value = yymsp[0].minor.yy328<<8; yygotominor.yy429.mask = 0x00ff00; } + break; + case 76: /* refact ::= SET NULL */ +{ yygotominor.yy328 = OE_SetNull; /* EV: R-33326-45252 */} + break; + case 77: /* refact ::= SET DEFAULT */ +{ yygotominor.yy328 = OE_SetDflt; /* EV: R-33326-45252 */} + break; + case 78: /* refact ::= CASCADE */ +{ yygotominor.yy328 = OE_Cascade; /* EV: R-33326-45252 */} + break; + case 79: /* refact ::= RESTRICT */ +{ yygotominor.yy328 = OE_Restrict; /* EV: R-33326-45252 */} + break; + case 80: /* refact ::= NO ACTION */ +{ yygotominor.yy328 = OE_None; /* EV: R-33326-45252 */} + break; + case 82: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ + case 98: /* defer_subclause_opt ::= defer_subclause */ yytestcase(yyruleno==98); + case 100: /* onconf ::= ON CONFLICT resolvetype */ yytestcase(yyruleno==100); + case 103: /* resolvetype ::= raisetype */ yytestcase(yyruleno==103); +{yygotominor.yy328 = yymsp[0].minor.yy328;} + break; + case 86: /* conslist_opt ::= */ +{yygotominor.yy0.n = 0; yygotominor.yy0.z = 0;} + break; + case 87: /* conslist_opt ::= COMMA conslist */ +{yygotominor.yy0 = yymsp[-1].minor.yy0;} + break; + case 90: /* tconscomma ::= COMMA */ +{pParse->constraintName.n = 0;} + break; + case 93: /* tcons ::= PRIMARY KEY LP idxlist autoinc RP onconf */ +{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy14,yymsp[0].minor.yy328,yymsp[-2].minor.yy328,0);} + break; + case 94: /* tcons ::= UNIQUE LP idxlist RP onconf */ +{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy14,yymsp[0].minor.yy328,0,0,0,0);} + break; + case 95: /* tcons ::= CHECK LP expr RP onconf */ +{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy346.pExpr);} + break; + case 96: /* tcons ::= FOREIGN KEY LP idxlist RP REFERENCES nm idxlist_opt refargs defer_subclause_opt */ +{ + sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy14, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy14, yymsp[-1].minor.yy328); + sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy328); +} + break; + case 99: /* onconf ::= */ +{yygotominor.yy328 = OE_Default;} + break; + case 101: /* orconf ::= */ +{yygotominor.yy186 = OE_Default;} + break; + case 102: /* orconf ::= OR resolvetype */ +{yygotominor.yy186 = (u8)yymsp[0].minor.yy328;} + break; + case 104: /* resolvetype ::= IGNORE */ +{yygotominor.yy328 = OE_Ignore;} + break; + case 105: /* resolvetype ::= REPLACE */ +{yygotominor.yy328 = OE_Replace;} + break; + case 106: /* cmd ::= DROP TABLE ifexists fullname */ +{ + sqlite3DropTable(pParse, yymsp[0].minor.yy65, 0, yymsp[-1].minor.yy328); +} + break; + case 109: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm AS select */ +{ + sqlite3CreateView(pParse, &yymsp[-7].minor.yy0, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, yymsp[0].minor.yy3, yymsp[-6].minor.yy328, yymsp[-4].minor.yy328); +} + break; + case 110: /* cmd ::= DROP VIEW ifexists fullname */ +{ + sqlite3DropTable(pParse, yymsp[0].minor.yy65, 1, yymsp[-1].minor.yy328); +} + break; + case 111: /* cmd ::= select */ +{ + SelectDest dest = {SRT_Output, 0, 0, 0, 0, 0}; + sqlite3Select(pParse, yymsp[0].minor.yy3, &dest); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy3); +} + break; + case 112: /* select ::= with selectnowith */ +{ + Select *p = yymsp[0].minor.yy3, *pNext, *pLoop; + if( p ){ + int cnt = 0, mxSelect; + p->pWith = yymsp[-1].minor.yy59; + if( p->pPrior ){ + pNext = 0; + for(pLoop=p; pLoop; pNext=pLoop, pLoop=pLoop->pPrior, cnt++){ + pLoop->pNext = pNext; + pLoop->selFlags |= SF_Compound; + } + mxSelect = pParse->db->aLimit[SQLITE_LIMIT_COMPOUND_SELECT]; + if( mxSelect && cnt>mxSelect ){ + sqlite3ErrorMsg(pParse, "too many terms in compound SELECT"); } } + }else{ + sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy59); } + yygotominor.yy3 = p; } - -/* -** Code an OP_Affinity opcode to apply the column affinity string zAff -** to the n registers starting at base. -** -** As an optimization, SQLITE_AFF_NONE entries (which are no-ops) at the -** beginning and end of zAff are ignored. If all entries in zAff are -** SQLITE_AFF_NONE, then no code gets generated. -** -** This routine makes its own copy of zAff so that the caller is free -** to modify zAff after this routine returns. -*/ -static void codeApplyAffinity(Parse *pParse, int base, int n, char *zAff){ - Vdbe *v = pParse->pVdbe; - if( zAff==0 ){ - assert( pParse->db->mallocFailed ); - return; + break; + case 113: /* selectnowith ::= oneselect */ + case 119: /* oneselect ::= values */ yytestcase(yyruleno==119); +{yygotominor.yy3 = yymsp[0].minor.yy3;} + break; + case 114: /* selectnowith ::= selectnowith multiselect_op oneselect */ +{ + Select *pRhs = yymsp[0].minor.yy3; + if( pRhs && pRhs->pPrior ){ + SrcList *pFrom; + Token x; + x.n = 0; + pFrom = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&x,pRhs,0,0); + pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0,0); + } + if( pRhs ){ + pRhs->op = (u8)yymsp[-1].minor.yy328; + pRhs->pPrior = yymsp[-2].minor.yy3; + if( yymsp[-1].minor.yy328!=TK_ALL ) pParse->hasCompound = 1; + }else{ + sqlite3SelectDelete(pParse->db, yymsp[-2].minor.yy3); } - assert( v!=0 ); - - /* Adjust base and n to skip over SQLITE_AFF_NONE entries at the beginning - ** and end of the affinity string. + yygotominor.yy3 = pRhs; +} + break; + case 116: /* multiselect_op ::= UNION ALL */ +{yygotominor.yy328 = TK_ALL;} + break; + case 118: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ +{ + yygotominor.yy3 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy14,yymsp[-5].minor.yy65,yymsp[-4].minor.yy132,yymsp[-3].minor.yy14,yymsp[-2].minor.yy132,yymsp[-1].minor.yy14,yymsp[-7].minor.yy381,yymsp[0].minor.yy476.pLimit,yymsp[0].minor.yy476.pOffset); +#if SELECTTRACE_ENABLED + /* Populate the Select.zSelName[] string that is used to help with + ** query planner debugging, to differentiate between multiple Select + ** objects in a complex query. + ** + ** If the SELECT keyword is immediately followed by a C-style comment + ** then extract the first few alphanumeric characters from within that + ** comment to be the zSelName value. Otherwise, the label is #N where + ** is an integer that is incremented with each SELECT statement seen. */ - while( n>0 && zAff[0]==SQLITE_AFF_NONE ){ - n--; - base++; - zAff++; - } - while( n>1 && zAff[n-1]==SQLITE_AFF_NONE ){ - n--; - } - - /* Code the OP_Affinity opcode if there is anything left to do. */ - if( n>0 ){ - sqlite3VdbeAddOp2(v, OP_Affinity, base, n); - sqlite3VdbeChangeP4(v, -1, zAff, n); - sqlite3ExprCacheAffinityChange(pParse, base, n); + if( yygotominor.yy3!=0 ){ + const char *z = yymsp[-8].minor.yy0.z+6; + int i; + sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "#%d", + ++pParse->nSelect); + while( z[0]==' ' ) z++; + if( z[0]=='/' && z[1]=='*' ){ + z += 2; + while( z[0]==' ' ) z++; + for(i=0; sqlite3Isalnum(z[i]); i++){} + sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "%.*s", i, z); + } } +#endif /* SELECTRACE_ENABLED */ } - - -/* -** Generate code for a single equality term of the WHERE clause. An equality -** term can be either X=expr or X IN (...). pTerm is the term to be -** coded. -** -** The current value for the constraint is left in register iReg. -** -** For a constraint of the form X=expr, the expression is evaluated and its -** result is left on the stack. For constraints of the form X IN (...) -** this routine sets up a loop that will iterate over all values of X. -*/ -static int codeEqualityTerm( - Parse *pParse, /* The parsing context */ - WhereTerm *pTerm, /* The term of the WHERE clause to be coded */ - WhereLevel *pLevel, /* When level of the FROM clause we are working on */ - int iTarget /* Attempt to leave results in this register */ -){ - Expr *pX = pTerm->pExpr; - Vdbe *v = pParse->pVdbe; - int iReg; /* Register holding results */ - - assert( iTarget>0 ); - if( pX->op==TK_EQ ){ - iReg = sqlite3ExprCodeTarget(pParse, pX->pRight, iTarget); - }else if( pX->op==TK_ISNULL ){ - iReg = iTarget; - sqlite3VdbeAddOp2(v, OP_Null, 0, iReg); -#ifndef SQLITE_OMIT_SUBQUERY + break; + case 120: /* values ::= VALUES LP nexprlist RP */ +{ + yygotominor.yy3 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy14,0,0,0,0,0,SF_Values,0,0); +} + break; + case 121: /* values ::= values COMMA LP exprlist RP */ +{ + Select *pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy14,0,0,0,0,0,SF_Values,0,0); + if( pRight ){ + pRight->op = TK_ALL; + pRight->pPrior = yymsp[-4].minor.yy3; + yygotominor.yy3 = pRight; }else{ - int eType; - int iTab; - struct InLoop *pIn; - - assert( pX->op==TK_IN ); - iReg = iTarget; - eType = sqlite3FindInIndex(pParse, pX, 0); - iTab = pX->iTable; - sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0); - assert( pLevel->plan.wsFlags & WHERE_IN_ABLE ); - if( pLevel->u.in.nIn==0 ){ - pLevel->addrNxt = sqlite3VdbeMakeLabel(v); - } - pLevel->u.in.nIn++; - pLevel->u.in.aInLoop = - sqlite3DbReallocOrFree(pParse->db, pLevel->u.in.aInLoop, - sizeof(pLevel->u.in.aInLoop[0])*pLevel->u.in.nIn); - pIn = pLevel->u.in.aInLoop; - if( pIn ){ - pIn += pLevel->u.in.nIn - 1; - pIn->iCur = iTab; - if( eType==IN_INDEX_ROWID ){ - pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iReg); - }else{ - pIn->addrInTop = sqlite3VdbeAddOp3(v, OP_Column, iTab, 0, iReg); - } - sqlite3VdbeAddOp1(v, OP_IsNull, iReg); - }else{ - pLevel->u.in.nIn = 0; - } -#endif + yygotominor.yy3 = yymsp[-4].minor.yy3; } - disableTerm(pLevel, pTerm); - return iReg; } - -/* -** Generate code that will evaluate all == and IN constraints for an -** index. -** -** For example, consider table t1(a,b,c,d,e,f) with index i1(a,b,c). -** Suppose the WHERE clause is this: a==5 AND b IN (1,2,3) AND c>5 AND c<10 -** The index has as many as three equality constraints, but in this -** example, the third "c" value is an inequality. So only two -** constraints are coded. This routine will generate code to evaluate -** a==5 and b IN (1,2,3). The current values for a and b will be stored -** in consecutive registers and the index of the first register is returned. -** -** In the example above nEq==2. But this subroutine works for any value -** of nEq including 0. If nEq==0, this routine is nearly a no-op. -** The only thing it does is allocate the pLevel->iMem memory cell and -** compute the affinity string. -** -** This routine always allocates at least one memory cell and returns -** the index of that memory cell. The code that -** calls this routine will use that memory cell to store the termination -** key value of the loop. If one or more IN operators appear, then -** this routine allocates an additional nEq memory cells for internal -** use. -** -** Before returning, *pzAff is set to point to a buffer containing a -** copy of the column affinity string of the index allocated using -** sqlite3DbMalloc(). Except, entries in the copy of the string associated -** with equality constraints that use NONE affinity are set to -** SQLITE_AFF_NONE. This is to deal with SQL such as the following: -** -** CREATE TABLE t1(a TEXT PRIMARY KEY, b); -** SELECT ... FROM t1 AS t2, t1 WHERE t1.a = t2.b; -** -** In the example above, the index on t1(a) has TEXT affinity. But since -** the right hand side of the equality constraint (t2.b) has NONE affinity, -** no conversion should be attempted before using a t2.b value as part of -** a key to search the index. Hence the first byte in the returned affinity -** string in this example would be set to SQLITE_AFF_NONE. -*/ -static int codeAllEqualityTerms( - Parse *pParse, /* Parsing context */ - WhereLevel *pLevel, /* Which nested loop of the FROM we are coding */ - WhereClause *pWC, /* The WHERE clause */ - Bitmask notReady, /* Which parts of FROM have not yet been coded */ - int nExtraReg, /* Number of extra registers to allocate */ - char **pzAff /* OUT: Set to point to affinity string */ -){ - int nEq = pLevel->plan.nEq; /* The number of == or IN constraints to code */ - Vdbe *v = pParse->pVdbe; /* The vm under construction */ - Index *pIdx; /* The index being used for this loop */ - int iCur = pLevel->iTabCur; /* The cursor of the table */ - WhereTerm *pTerm; /* A single constraint term */ - int j; /* Loop counter */ - int regBase; /* Base register */ - int nReg; /* Number of registers to allocate */ - char *zAff; /* Affinity string to return */ - - /* This module is only called on query plans that use an index. */ - assert( pLevel->plan.wsFlags & WHERE_INDEXED ); - pIdx = pLevel->plan.u.pIdx; - - /* Figure out how many memory cells we will need then allocate them. - */ - regBase = pParse->nMem + 1; - nReg = pLevel->plan.nEq + nExtraReg; - pParse->nMem += nReg; - - zAff = sqlite3DbStrDup(pParse->db, sqlite3IndexAffinityStr(v, pIdx)); - if( !zAff ){ - pParse->db->mallocFailed = 1; + break; + case 122: /* distinct ::= DISTINCT */ +{yygotominor.yy381 = SF_Distinct;} + break; + case 123: /* distinct ::= ALL */ + case 124: /* distinct ::= */ yytestcase(yyruleno==124); +{yygotominor.yy381 = 0;} + break; + case 125: /* sclp ::= selcollist COMMA */ + case 243: /* idxlist_opt ::= LP idxlist RP */ yytestcase(yyruleno==243); +{yygotominor.yy14 = yymsp[-1].minor.yy14;} + break; + case 126: /* sclp ::= */ + case 154: /* orderby_opt ::= */ yytestcase(yyruleno==154); + case 161: /* groupby_opt ::= */ yytestcase(yyruleno==161); + case 236: /* exprlist ::= */ yytestcase(yyruleno==236); + case 242: /* idxlist_opt ::= */ yytestcase(yyruleno==242); +{yygotominor.yy14 = 0;} + break; + case 127: /* selcollist ::= sclp expr as */ +{ + yygotominor.yy14 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy14, yymsp[-1].minor.yy346.pExpr); + if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yygotominor.yy14, &yymsp[0].minor.yy0, 1); + sqlite3ExprListSetSpan(pParse,yygotominor.yy14,&yymsp[-1].minor.yy346); +} + break; + case 128: /* selcollist ::= sclp STAR */ +{ + Expr *p = sqlite3Expr(pParse->db, TK_ALL, 0); + yygotominor.yy14 = sqlite3ExprListAppend(pParse, yymsp[-1].minor.yy14, p); +} + break; + case 129: /* selcollist ::= sclp nm DOT STAR */ +{ + Expr *pRight = sqlite3PExpr(pParse, TK_ALL, 0, 0, &yymsp[0].minor.yy0); + Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); + Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy14, pDot); +} + break; + case 132: /* as ::= */ +{yygotominor.yy0.n = 0;} + break; + case 133: /* from ::= */ +{yygotominor.yy65 = sqlite3DbMallocZero(pParse->db, sizeof(*yygotominor.yy65));} + break; + case 134: /* from ::= FROM seltablist */ +{ + yygotominor.yy65 = yymsp[0].minor.yy65; + sqlite3SrcListShiftJoinType(yygotominor.yy65); +} + break; + case 135: /* stl_prefix ::= seltablist joinop */ +{ + yygotominor.yy65 = yymsp[-1].minor.yy65; + if( ALWAYS(yygotominor.yy65 && yygotominor.yy65->nSrc>0) ) yygotominor.yy65->a[yygotominor.yy65->nSrc-1].jointype = (u8)yymsp[0].minor.yy328; +} + break; + case 136: /* stl_prefix ::= */ +{yygotominor.yy65 = 0;} + break; + case 137: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ +{ + yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy132,yymsp[0].minor.yy408); + sqlite3SrcListIndexedBy(pParse, yygotominor.yy65, &yymsp[-2].minor.yy0); +} + break; + case 138: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ +{ + yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy3,yymsp[-1].minor.yy132,yymsp[0].minor.yy408); } - - /* Evaluate the equality constraints - */ - assert( pIdx->nColumn>=nEq ); - for(j=0; jaiColumn[j]; - pTerm = findTerm(pWC, iCur, k, notReady, pLevel->plan.wsFlags, pIdx); - if( NEVER(pTerm==0) ) break; - /* The following true for indices with redundant columns. - ** Ex: CREATE INDEX i1 ON t1(a,b,a); SELECT * FROM t1 WHERE a=0 AND b=0; */ - testcase( (pTerm->wtFlags & TERM_CODED)!=0 ); - testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - r1 = codeEqualityTerm(pParse, pTerm, pLevel, regBase+j); - if( r1!=regBase+j ){ - if( nReg==1 ){ - sqlite3ReleaseTempReg(pParse, regBase); - regBase = r1; - }else{ - sqlite3VdbeAddOp2(v, OP_SCopy, r1, regBase+j); - } - } - testcase( pTerm->eOperator & WO_ISNULL ); - testcase( pTerm->eOperator & WO_IN ); - if( (pTerm->eOperator & (WO_ISNULL|WO_IN))==0 ){ - Expr *pRight = pTerm->pExpr->pRight; - sqlite3ExprCodeIsNullJump(v, pRight, regBase+j, pLevel->addrBrk); - if( zAff ){ - if( sqlite3CompareAffinity(pRight, zAff[j])==SQLITE_AFF_NONE ){ - zAff[j] = SQLITE_AFF_NONE; - } - if( sqlite3ExprNeedsNoAffinityChange(pRight, zAff[j]) ){ - zAff[j] = SQLITE_AFF_NONE; - } - } + break; + case 139: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ +{ + if( yymsp[-6].minor.yy65==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy132==0 && yymsp[0].minor.yy408==0 ){ + yygotominor.yy65 = yymsp[-4].minor.yy65; + }else if( yymsp[-4].minor.yy65->nSrc==1 ){ + yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy132,yymsp[0].minor.yy408); + if( yygotominor.yy65 ){ + struct SrcList_item *pNew = &yygotominor.yy65->a[yygotominor.yy65->nSrc-1]; + struct SrcList_item *pOld = yymsp[-4].minor.yy65->a; + pNew->zName = pOld->zName; + pNew->zDatabase = pOld->zDatabase; + pNew->pSelect = pOld->pSelect; + pOld->zName = pOld->zDatabase = 0; + pOld->pSelect = 0; + } + sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy65); + }else{ + Select *pSubquery; + sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy65); + pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy65,0,0,0,0,SF_NestedFrom,0,0); + yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy132,yymsp[0].minor.yy408); } } - *pzAff = zAff; - return regBase; + break; + case 140: /* dbnm ::= */ + case 149: /* indexed_opt ::= */ yytestcase(yyruleno==149); +{yygotominor.yy0.z=0; yygotominor.yy0.n=0;} + break; + case 142: /* fullname ::= nm dbnm */ +{yygotominor.yy65 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);} + break; + case 143: /* joinop ::= COMMA|JOIN */ +{ yygotominor.yy328 = JT_INNER; } + break; + case 144: /* joinop ::= JOIN_KW JOIN */ +{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); } + break; + case 145: /* joinop ::= JOIN_KW nm JOIN */ +{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); } + break; + case 146: /* joinop ::= JOIN_KW nm nm JOIN */ +{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); } + break; + case 147: /* on_opt ::= ON expr */ + case 164: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==164); + case 171: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==171); + case 231: /* case_else ::= ELSE expr */ yytestcase(yyruleno==231); + case 233: /* case_operand ::= expr */ yytestcase(yyruleno==233); +{yygotominor.yy132 = yymsp[0].minor.yy346.pExpr;} + break; + case 148: /* on_opt ::= */ + case 163: /* having_opt ::= */ yytestcase(yyruleno==163); + case 170: /* where_opt ::= */ yytestcase(yyruleno==170); + case 232: /* case_else ::= */ yytestcase(yyruleno==232); + case 234: /* case_operand ::= */ yytestcase(yyruleno==234); +{yygotominor.yy132 = 0;} + break; + case 151: /* indexed_opt ::= NOT INDEXED */ +{yygotominor.yy0.z=0; yygotominor.yy0.n=1;} + break; + case 152: /* using_opt ::= USING LP idlist RP */ + case 180: /* inscollist_opt ::= LP idlist RP */ yytestcase(yyruleno==180); +{yygotominor.yy408 = yymsp[-1].minor.yy408;} + break; + case 153: /* using_opt ::= */ + case 179: /* inscollist_opt ::= */ yytestcase(yyruleno==179); +{yygotominor.yy408 = 0;} + break; + case 155: /* orderby_opt ::= ORDER BY sortlist */ + case 162: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==162); + case 235: /* exprlist ::= nexprlist */ yytestcase(yyruleno==235); +{yygotominor.yy14 = yymsp[0].minor.yy14;} + break; + case 156: /* sortlist ::= sortlist COMMA expr sortorder */ +{ + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy14,yymsp[-1].minor.yy346.pExpr); + if( yygotominor.yy14 ) yygotominor.yy14->a[yygotominor.yy14->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy328; } - -#ifndef SQLITE_OMIT_EXPLAIN -/* -** This routine is a helper for explainIndexRange() below -** -** pStr holds the text of an expression that we are building up one term -** at a time. This routine adds a new term to the end of the expression. -** Terms are separated by AND so add the "AND" text for second and subsequent -** terms only. -*/ -static void explainAppendTerm( - StrAccum *pStr, /* The text expression being built */ - int iTerm, /* Index of this term. First is zero */ - const char *zColumn, /* Name of the column */ - const char *zOp /* Name of the operator */ -){ - if( iTerm ) sqlite3StrAccumAppend(pStr, " AND ", 5); - sqlite3StrAccumAppend(pStr, zColumn, -1); - sqlite3StrAccumAppend(pStr, zOp, 1); - sqlite3StrAccumAppend(pStr, "?", 1); + break; + case 157: /* sortlist ::= expr sortorder */ +{ + yygotominor.yy14 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy346.pExpr); + if( yygotominor.yy14 && ALWAYS(yygotominor.yy14->a) ) yygotominor.yy14->a[0].sortOrder = (u8)yymsp[0].minor.yy328; } - -/* -** Argument pLevel describes a strategy for scanning table pTab. This -** function returns a pointer to a string buffer containing a description -** of the subset of table rows scanned by the strategy in the form of an -** SQL expression. Or, if all rows are scanned, NULL is returned. -** -** For example, if the query: -** -** SELECT * FROM t1 WHERE a=1 AND b>2; -** -** is run and there is an index on (a, b), then this function returns a -** string similar to: -** -** "a=? AND b>?" -** -** The returned pointer points to memory obtained from sqlite3DbMalloc(). -** It is the responsibility of the caller to free the buffer when it is -** no longer required. -*/ -static char *explainIndexRange(sqlite3 *db, WhereLevel *pLevel, Table *pTab){ - WherePlan *pPlan = &pLevel->plan; - Index *pIndex = pPlan->u.pIdx; - int nEq = pPlan->nEq; - int i, j; - Column *aCol = pTab->aCol; - int *aiColumn = pIndex->aiColumn; - StrAccum txt; - - if( nEq==0 && (pPlan->wsFlags & (WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ){ - return 0; - } - sqlite3StrAccumInit(&txt, 0, 0, SQLITE_MAX_LENGTH); - txt.db = db; - sqlite3StrAccumAppend(&txt, " (", 2); - for(i=0; idb,yymsp[-2].minor.yy408,&yymsp[0].minor.yy0);} + break; + case 182: /* idlist ::= nm */ +{yygotominor.yy408 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0);} + break; + case 183: /* expr ::= term */ +{yygotominor.yy346 = yymsp[0].minor.yy346;} + break; + case 184: /* expr ::= LP expr RP */ +{yygotominor.yy346.pExpr = yymsp[-1].minor.yy346.pExpr; spanSet(&yygotominor.yy346,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0);} + break; + case 185: /* term ::= NULL */ + case 190: /* term ::= INTEGER|FLOAT|BLOB */ yytestcase(yyruleno==190); + case 191: /* term ::= STRING */ yytestcase(yyruleno==191); +{spanExpr(&yygotominor.yy346, pParse, yymsp[0].major, &yymsp[0].minor.yy0);} + break; + case 186: /* expr ::= ID|INDEXED */ + case 187: /* expr ::= JOIN_KW */ yytestcase(yyruleno==187); +{spanExpr(&yygotominor.yy346, pParse, TK_ID, &yymsp[0].minor.yy0);} + break; + case 188: /* expr ::= nm DOT nm */ +{ + Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); + Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0); + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2, 0); + spanSet(&yygotominor.yy346,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); +} + break; + case 189: /* expr ::= nm DOT nm DOT nm */ +{ + Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-4].minor.yy0); + Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); + Expr *temp3 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0); + Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3, 0); + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4, 0); + spanSet(&yygotominor.yy346,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); +} + break; + case 192: /* expr ::= VARIABLE */ +{ + if( yymsp[0].minor.yy0.n>=2 && yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1]) ){ + /* When doing a nested parse, one can include terms in an expression + ** that look like this: #1 #2 ... These terms refer to registers + ** in the virtual machine. #N is the N-th register. */ + if( pParse->nested==0 ){ + sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &yymsp[0].minor.yy0); + yygotominor.yy346.pExpr = 0; + }else{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, &yymsp[0].minor.yy0); + if( yygotominor.yy346.pExpr ) sqlite3GetInt32(&yymsp[0].minor.yy0.z[1], &yygotominor.yy346.pExpr->iTable); + } + }else{ + spanExpr(&yygotominor.yy346, pParse, TK_VARIABLE, &yymsp[0].minor.yy0); + sqlite3ExprAssignVarNumber(pParse, yygotominor.yy346.pExpr); } - - j = i; - if( pPlan->wsFlags&WHERE_BTM_LIMIT ){ - explainAppendTerm(&txt, i++, aCol[aiColumn[j]].zName, ">"); + spanSet(&yygotominor.yy346, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); +} + break; + case 193: /* expr ::= expr COLLATE ID|STRING */ +{ + yygotominor.yy346.pExpr = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy346.pExpr, &yymsp[0].minor.yy0); + yygotominor.yy346.zStart = yymsp[-2].minor.yy346.zStart; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; +} + break; + case 194: /* expr ::= CAST LP expr AS typetoken RP */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_CAST, yymsp[-3].minor.yy346.pExpr, 0, &yymsp[-1].minor.yy0); + spanSet(&yygotominor.yy346,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); +} + break; + case 195: /* expr ::= ID|INDEXED LP distinct exprlist RP */ +{ + if( yymsp[-1].minor.yy14 && yymsp[-1].minor.yy14->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ + sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0); } - if( pPlan->wsFlags&WHERE_TOP_LIMIT ){ - explainAppendTerm(&txt, i, aCol[aiColumn[j]].zName, "<"); + yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy14, &yymsp[-4].minor.yy0); + spanSet(&yygotominor.yy346,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); + if( yymsp[-2].minor.yy381 && yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->flags |= EP_Distinct; } - sqlite3StrAccumAppend(&txt, ")", 1); - return sqlite3StrAccumFinish(&txt); } - -/* -** This function is a no-op unless currently processing an EXPLAIN QUERY PLAN -** command. If the query being compiled is an EXPLAIN QUERY PLAN, a single -** record is added to the output to describe the table scan strategy in -** pLevel. -*/ -static void explainOneScan( - Parse *pParse, /* Parse context */ - SrcList *pTabList, /* Table list this loop refers to */ - WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ - int iLevel, /* Value for "level" column of output */ - int iFrom, /* Value for "from" column of output */ - u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ -){ - if( pParse->explain==2 ){ - u32 flags = pLevel->plan.wsFlags; - struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom]; - Vdbe *v = pParse->pVdbe; /* VM being constructed */ - sqlite3 *db = pParse->db; /* Database handle */ - char *zMsg; /* Text to add to EQP output */ - sqlite3_int64 nRow; /* Expected number of rows visited by scan */ - int iId = pParse->iSelectId; /* Select id (left-most output column) */ - int isSearch; /* True for a SEARCH. False for SCAN. */ - - if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_ONETABLE_ONLY) ) return; - - isSearch = (pLevel->plan.nEq>0) - || (flags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))!=0 - || (wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX)); - - zMsg = sqlite3MPrintf(db, "%s", isSearch?"SEARCH":"SCAN"); - if( pItem->pSelect ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s SUBQUERY %d", zMsg,pItem->iSelectId); + break; + case 196: /* expr ::= ID|INDEXED LP STAR RP */ +{ + yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0); + spanSet(&yygotominor.yy346,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); +} + break; + case 197: /* term ::= CTIME_KW */ +{ + yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0); + spanSet(&yygotominor.yy346, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); +} + break; + case 198: /* expr ::= expr AND expr */ + case 199: /* expr ::= expr OR expr */ yytestcase(yyruleno==199); + case 200: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==200); + case 201: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==201); + case 202: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==202); + case 203: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==203); + case 204: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==204); + case 205: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==205); +{spanBinaryExpr(&yygotominor.yy346,pParse,yymsp[-1].major,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy346);} + break; + case 206: /* likeop ::= LIKE_KW|MATCH */ +{yygotominor.yy96.eOperator = yymsp[0].minor.yy0; yygotominor.yy96.bNot = 0;} + break; + case 207: /* likeop ::= NOT LIKE_KW|MATCH */ +{yygotominor.yy96.eOperator = yymsp[0].minor.yy0; yygotominor.yy96.bNot = 1;} + break; + case 208: /* expr ::= expr likeop expr */ +{ + ExprList *pList; + pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy346.pExpr); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy346.pExpr); + yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy96.eOperator); + if( yymsp[-1].minor.yy96.bNot ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); + yygotominor.yy346.zStart = yymsp[-2].minor.yy346.zStart; + yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd; + if( yygotominor.yy346.pExpr ) yygotominor.yy346.pExpr->flags |= EP_InfixFunc; +} + break; + case 209: /* expr ::= expr likeop expr ESCAPE expr */ +{ + ExprList *pList; + pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy346.pExpr); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy346.pExpr); + yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy96.eOperator); + if( yymsp[-3].minor.yy96.bNot ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); + yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart; + yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd; + if( yygotominor.yy346.pExpr ) yygotominor.yy346.pExpr->flags |= EP_InfixFunc; +} + break; + case 210: /* expr ::= expr ISNULL|NOTNULL */ +{spanUnaryPostfix(&yygotominor.yy346,pParse,yymsp[0].major,&yymsp[-1].minor.yy346,&yymsp[0].minor.yy0);} + break; + case 211: /* expr ::= expr NOT NULL */ +{spanUnaryPostfix(&yygotominor.yy346,pParse,TK_NOTNULL,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy0);} + break; + case 212: /* expr ::= expr IS expr */ +{ + spanBinaryExpr(&yygotominor.yy346,pParse,TK_IS,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy346); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy346.pExpr, yygotominor.yy346.pExpr, TK_ISNULL); +} + break; + case 213: /* expr ::= expr IS NOT expr */ +{ + spanBinaryExpr(&yygotominor.yy346,pParse,TK_ISNOT,&yymsp[-3].minor.yy346,&yymsp[0].minor.yy346); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy346.pExpr, yygotominor.yy346.pExpr, TK_NOTNULL); +} + break; + case 214: /* expr ::= NOT expr */ + case 215: /* expr ::= BITNOT expr */ yytestcase(yyruleno==215); +{spanUnaryPrefix(&yygotominor.yy346,pParse,yymsp[-1].major,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);} + break; + case 216: /* expr ::= MINUS expr */ +{spanUnaryPrefix(&yygotominor.yy346,pParse,TK_UMINUS,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);} + break; + case 217: /* expr ::= PLUS expr */ +{spanUnaryPrefix(&yygotominor.yy346,pParse,TK_UPLUS,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);} + break; + case 220: /* expr ::= expr between_op expr AND expr */ +{ + ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy346.pExpr); + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy346.pExpr, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->x.pList = pList; + }else{ + sqlite3ExprListDelete(pParse->db, pList); + } + if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); + yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart; + yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd; +} + break; + case 223: /* expr ::= expr in_op LP exprlist RP */ +{ + if( yymsp[-1].minor.yy14==0 ){ + /* Expressions of the form + ** + ** expr1 IN () + ** expr1 NOT IN () + ** + ** simplify to constants 0 (false) and 1 (true), respectively, + ** regardless of the value of expr1. + */ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy328]); + sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy346.pExpr); + }else if( yymsp[-1].minor.yy14->nExpr==1 ){ + /* Expressions of the form: + ** + ** expr1 IN (?1) + ** expr1 NOT IN (?2) + ** + ** with exactly one value on the RHS can be simplified to something + ** like this: + ** + ** expr1 == ?1 + ** expr1 <> ?2 + ** + ** But, the RHS of the == or <> is marked with the EP_Generic flag + ** so that it may not contribute to the computation of comparison + ** affinity or the collating sequence to use for comparison. Otherwise, + ** the semantics would be subtly different from IN or NOT IN. + */ + Expr *pRHS = yymsp[-1].minor.yy14->a[0].pExpr; + yymsp[-1].minor.yy14->a[0].pExpr = 0; + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14); + /* pRHS cannot be NULL because a malloc error would have been detected + ** before now and control would have never reached this point */ + if( ALWAYS(pRHS) ){ + pRHS->flags &= ~EP_Collate; + pRHS->flags |= EP_Generic; + } + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy328 ? TK_NE : TK_EQ, yymsp[-4].minor.yy346.pExpr, pRHS, 0); }else{ - zMsg = sqlite3MAppendf(db, zMsg, "%s TABLE %s", zMsg, pItem->zName); - } - - if( pItem->zAlias ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s AS %s", zMsg, pItem->zAlias); - } - if( (flags & WHERE_INDEXED)!=0 ){ - char *zWhere = explainIndexRange(db, pLevel, pItem->pTab); - zMsg = sqlite3MAppendf(db, zMsg, "%s USING %s%sINDEX%s%s%s", zMsg, - ((flags & WHERE_TEMP_INDEX)?"AUTOMATIC ":""), - ((flags & WHERE_IDX_ONLY)?"COVERING ":""), - ((flags & WHERE_TEMP_INDEX)?"":" "), - ((flags & WHERE_TEMP_INDEX)?"": pLevel->plan.u.pIdx->zName), - zWhere - ); - sqlite3DbFree(db, zWhere); - }else if( flags & (WHERE_ROWID_EQ|WHERE_ROWID_RANGE) ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s USING INTEGER PRIMARY KEY", zMsg); - - if( flags&WHERE_ROWID_EQ ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowid=?)", zMsg); - }else if( (flags&WHERE_BOTH_LIMIT)==WHERE_BOTH_LIMIT ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowid>? AND rowid?)", zMsg); - }else if( flags&WHERE_TOP_LIMIT ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowidx.pList = yymsp[-1].minor.yy14; + sqlite3ExprSetHeight(pParse, yygotominor.yy346.pExpr); + }else{ + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14); } + if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); } -#ifndef SQLITE_OMIT_VIRTUALTABLE - else if( (flags & WHERE_VIRTUALTABLE)!=0 ){ - sqlite3_index_info *pVtabIdx = pLevel->plan.u.pVtabIdx; - zMsg = sqlite3MAppendf(db, zMsg, "%s VIRTUAL TABLE INDEX %d:%s", zMsg, - pVtabIdx->idxNum, pVtabIdx->idxStr); - } -#endif - if( wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX) ){ - testcase( wctrlFlags & WHERE_ORDERBY_MIN ); - nRow = 1; + yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + } + break; + case 224: /* expr ::= LP select RP */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->x.pSelect = yymsp[-1].minor.yy3; + ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect); + sqlite3ExprSetHeight(pParse, yygotominor.yy346.pExpr); }else{ - nRow = (sqlite3_int64)pLevel->plan.nRow; + sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3); } - zMsg = sqlite3MAppendf(db, zMsg, "%s (~%lld rows)", zMsg, nRow); - sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg, P4_DYNAMIC); - } -} -#else -# define explainOneScan(u,v,w,x,y,z) -#endif /* SQLITE_OMIT_EXPLAIN */ - - -/* -** Generate code for the start of the iLevel-th loop in the WHERE clause -** implementation described by pWInfo. -*/ -static Bitmask codeOneLoopStart( - WhereInfo *pWInfo, /* Complete information about the WHERE clause */ - int iLevel, /* Which level of pWInfo->a[] should be coded */ - u16 wctrlFlags, /* One of the WHERE_* flags defined in sqliteInt.h */ - Bitmask notReady /* Which tables are currently available */ -){ - int j, k; /* Loop counters */ - int iCur; /* The VDBE cursor for the table */ - int addrNxt; /* Where to jump to continue with the next IN case */ - int omitTable; /* True if we use the index only */ - int bRev; /* True if we need to scan in reverse order */ - WhereLevel *pLevel; /* The where level to be coded */ - WhereClause *pWC; /* Decomposition of the entire WHERE clause */ - WhereTerm *pTerm; /* A WHERE clause term */ - Parse *pParse; /* Parsing context */ - Vdbe *v; /* The prepared stmt under constructions */ - struct SrcList_item *pTabItem; /* FROM clause term being coded */ - int addrBrk; /* Jump here to break out of the loop */ - int addrCont; /* Jump here to continue with next cycle */ - int iRowidReg = 0; /* Rowid is stored in this register, if not zero */ - int iReleaseReg = 0; /* Temp register to free before returning */ - - pParse = pWInfo->pParse; - v = pParse->pVdbe; - pWC = pWInfo->pWC; - pLevel = &pWInfo->a[iLevel]; - pTabItem = &pWInfo->pTabList->a[pLevel->iFrom]; - iCur = pTabItem->iCursor; - bRev = (pLevel->plan.wsFlags & WHERE_REVERSE)!=0; - omitTable = (pLevel->plan.wsFlags & WHERE_IDX_ONLY)!=0 - && (wctrlFlags & WHERE_FORCE_TABLE)==0; - - /* Create labels for the "break" and "continue" instructions - ** for the current loop. Jump to addrBrk to break out of a loop. - ** Jump to cont to go immediately to the next iteration of the - ** loop. - ** - ** When there is an IN operator, we also have a "addrNxt" label that - ** means to continue with the next IN value combination. When - ** there are no IN operators in the constraints, the "addrNxt" label - ** is the same as "addrBrk". - */ - addrBrk = pLevel->addrBrk = pLevel->addrNxt = sqlite3VdbeMakeLabel(v); - addrCont = pLevel->addrCont = sqlite3VdbeMakeLabel(v); - - /* If this is the right table of a LEFT OUTER JOIN, allocate and - ** initialize a memory cell that records if this table matches any - ** row of the left table of the join. - */ - if( pLevel->iFrom>0 && (pTabItem[0].jointype & JT_LEFT)!=0 ){ - pLevel->iLeftJoin = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin); - VdbeComment((v, "init LEFT JOIN no-match flag")); + yygotominor.yy346.zStart = yymsp[-2].minor.yy0.z; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; } - -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){ - /* Case 0: The table is a virtual-table. Use the VFilter and VNext - ** to access the data. - */ - int iReg; /* P3 Value for OP_VFilter */ - sqlite3_index_info *pVtabIdx = pLevel->plan.u.pVtabIdx; - int nConstraint = pVtabIdx->nConstraint; - struct sqlite3_index_constraint_usage *aUsage = - pVtabIdx->aConstraintUsage; - const struct sqlite3_index_constraint *aConstraint = - pVtabIdx->aConstraint; - - sqlite3ExprCachePush(pParse); - iReg = sqlite3GetTempRange(pParse, nConstraint+2); - for(j=1; j<=nConstraint; j++){ - for(k=0; ka[iTerm].pExpr->pRight, iReg+j+1); - break; - } - } - if( k==nConstraint ) break; - } - sqlite3VdbeAddOp2(v, OP_Integer, pVtabIdx->idxNum, iReg); - sqlite3VdbeAddOp2(v, OP_Integer, j-1, iReg+1); - sqlite3VdbeAddOp4(v, OP_VFilter, iCur, addrBrk, iReg, pVtabIdx->idxStr, - pVtabIdx->needToFreeIdxStr ? P4_MPRINTF : P4_STATIC); - pVtabIdx->needToFreeIdxStr = 0; - for(j=0; ja[iTerm]); - } - } - pLevel->op = OP_VNext; - pLevel->p1 = iCur; - pLevel->p2 = sqlite3VdbeCurrentAddr(v); - sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2); - sqlite3ExprCachePop(pParse, 1); - }else -#endif /* SQLITE_OMIT_VIRTUALTABLE */ - - if( pLevel->plan.wsFlags & WHERE_ROWID_EQ ){ - /* Case 1: We can directly reference a single row using an - ** equality comparison against the ROWID field. Or - ** we reference multiple rows using a "rowid IN (...)" - ** construct. - */ - iReleaseReg = sqlite3GetTempReg(pParse); - pTerm = findTerm(pWC, iCur, -1, notReady, WO_EQ|WO_IN, 0); - assert( pTerm!=0 ); - assert( pTerm->pExpr!=0 ); - assert( pTerm->leftCursor==iCur ); - assert( omitTable==0 ); - testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - iRowidReg = codeEqualityTerm(pParse, pTerm, pLevel, iReleaseReg); - addrNxt = pLevel->addrNxt; - sqlite3VdbeAddOp2(v, OP_MustBeInt, iRowidReg, addrNxt); - sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addrNxt, iRowidReg); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); - VdbeComment((v, "pk")); - pLevel->op = OP_Noop; - }else if( pLevel->plan.wsFlags & WHERE_ROWID_RANGE ){ - /* Case 2: We have an inequality comparison against the ROWID field. - */ - int testOp = OP_Noop; - int start; - int memEndValue = 0; - WhereTerm *pStart, *pEnd; - - assert( omitTable==0 ); - pStart = findTerm(pWC, iCur, -1, notReady, WO_GT|WO_GE, 0); - pEnd = findTerm(pWC, iCur, -1, notReady, WO_LT|WO_LE, 0); - if( bRev ){ - pTerm = pStart; - pStart = pEnd; - pEnd = pTerm; - } - if( pStart ){ - Expr *pX; /* The expression that defines the start bound */ - int r1, rTemp; /* Registers for holding the start boundary */ - - /* The following constant maps TK_xx codes into corresponding - ** seek opcodes. It depends on a particular ordering of TK_xx - */ - const u8 aMoveOp[] = { - /* TK_GT */ OP_SeekGt, - /* TK_LE */ OP_SeekLe, - /* TK_LT */ OP_SeekLt, - /* TK_GE */ OP_SeekGe - }; - assert( TK_LE==TK_GT+1 ); /* Make sure the ordering.. */ - assert( TK_LT==TK_GT+2 ); /* ... of the TK_xx values... */ - assert( TK_GE==TK_GT+3 ); /* ... is correcct. */ - - testcase( pStart->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - pX = pStart->pExpr; - assert( pX!=0 ); - assert( pStart->leftCursor==iCur ); - r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp); - sqlite3VdbeAddOp3(v, aMoveOp[pX->op-TK_GT], iCur, addrBrk, r1); - VdbeComment((v, "pk")); - sqlite3ExprCacheAffinityChange(pParse, r1, 1); - sqlite3ReleaseTempReg(pParse, rTemp); - disableTerm(pLevel, pStart); + break; + case 225: /* expr ::= expr in_op LP select RP */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy346.pExpr, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->x.pSelect = yymsp[-1].minor.yy3; + ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect); + sqlite3ExprSetHeight(pParse, yygotominor.yy346.pExpr); }else{ - sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk); + sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3); } - if( pEnd ){ - Expr *pX; - pX = pEnd->pExpr; - assert( pX!=0 ); - assert( pEnd->leftCursor==iCur ); - testcase( pEnd->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - memEndValue = ++pParse->nMem; - sqlite3ExprCode(pParse, pX->pRight, memEndValue); - if( pX->op==TK_LT || pX->op==TK_GT ){ - testOp = bRev ? OP_Le : OP_Ge; - }else{ - testOp = bRev ? OP_Lt : OP_Gt; - } - disableTerm(pLevel, pEnd); + if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); + yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + } + break; + case 226: /* expr ::= expr in_op nm dbnm */ +{ + SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0); + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-3].minor.yy346.pExpr, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->x.pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0); + ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect); + sqlite3ExprSetHeight(pParse, yygotominor.yy346.pExpr); + }else{ + sqlite3SrcListDelete(pParse->db, pSrc); } - start = sqlite3VdbeCurrentAddr(v); - pLevel->op = bRev ? OP_Prev : OP_Next; - pLevel->p1 = iCur; - pLevel->p2 = start; - if( pStart==0 && pEnd==0 ){ - pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; + if( yymsp[-2].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0); + yygotominor.yy346.zStart = yymsp[-3].minor.yy346.zStart; + yygotominor.yy346.zEnd = yymsp[0].minor.yy0.z ? &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] : &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n]; + } + break; + case 227: /* expr ::= EXISTS LP select RP */ +{ + Expr *p = yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0, 0); + if( p ){ + p->x.pSelect = yymsp[-1].minor.yy3; + ExprSetProperty(p, EP_xIsSelect); + sqlite3ExprSetHeight(pParse, p); }else{ - assert( pLevel->p5==0 ); + sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3); } - if( testOp!=OP_Noop ){ - iRowidReg = iReleaseReg = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_Rowid, iCur, iRowidReg); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); - sqlite3VdbeAddOp3(v, testOp, memEndValue, addrBrk, iRowidReg); - sqlite3VdbeChangeP5(v, SQLITE_AFF_NUMERIC | SQLITE_JUMPIFNULL); + yygotominor.yy346.zStart = yymsp[-3].minor.yy0.z; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + } + break; + case 228: /* expr ::= CASE case_operand case_exprlist case_else END */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy132, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->x.pList = yymsp[-1].minor.yy132 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy14,yymsp[-1].minor.yy132) : yymsp[-2].minor.yy14; + sqlite3ExprSetHeight(pParse, yygotominor.yy346.pExpr); + }else{ + sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy14); + sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy132); + } + yygotominor.yy346.zStart = yymsp[-4].minor.yy0.z; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; +} + break; + case 229: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ +{ + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy14, yymsp[-2].minor.yy346.pExpr); + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yygotominor.yy14, yymsp[0].minor.yy346.pExpr); +} + break; + case 230: /* case_exprlist ::= WHEN expr THEN expr */ +{ + yygotominor.yy14 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr); + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yygotominor.yy14, yymsp[0].minor.yy346.pExpr); +} + break; + case 237: /* nexprlist ::= nexprlist COMMA expr */ +{yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy14,yymsp[0].minor.yy346.pExpr);} + break; + case 238: /* nexprlist ::= expr */ +{yygotominor.yy14 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy346.pExpr);} + break; + case 239: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP idxlist RP where_opt */ +{ + sqlite3CreateIndex(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, + sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy14, yymsp[-10].minor.yy328, + &yymsp[-11].minor.yy0, yymsp[0].minor.yy132, SQLITE_SO_ASC, yymsp[-8].minor.yy328); +} + break; + case 240: /* uniqueflag ::= UNIQUE */ + case 291: /* raisetype ::= ABORT */ yytestcase(yyruleno==291); +{yygotominor.yy328 = OE_Abort;} + break; + case 241: /* uniqueflag ::= */ +{yygotominor.yy328 = OE_None;} + break; + case 244: /* idxlist ::= idxlist COMMA nm collate sortorder */ +{ + Expr *p = sqlite3ExprAddCollateToken(pParse, 0, &yymsp[-1].minor.yy0); + yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy14, p); + sqlite3ExprListSetName(pParse,yygotominor.yy14,&yymsp[-2].minor.yy0,1); + sqlite3ExprListCheckLength(pParse, yygotominor.yy14, "index"); + if( yygotominor.yy14 ) yygotominor.yy14->a[yygotominor.yy14->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy328; +} + break; + case 245: /* idxlist ::= nm collate sortorder */ +{ + Expr *p = sqlite3ExprAddCollateToken(pParse, 0, &yymsp[-1].minor.yy0); + yygotominor.yy14 = sqlite3ExprListAppend(pParse,0, p); + sqlite3ExprListSetName(pParse, yygotominor.yy14, &yymsp[-2].minor.yy0, 1); + sqlite3ExprListCheckLength(pParse, yygotominor.yy14, "index"); + if( yygotominor.yy14 ) yygotominor.yy14->a[yygotominor.yy14->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy328; +} + break; + case 246: /* collate ::= */ +{yygotominor.yy0.z = 0; yygotominor.yy0.n = 0;} + break; + case 248: /* cmd ::= DROP INDEX ifexists fullname */ +{sqlite3DropIndex(pParse, yymsp[0].minor.yy65, yymsp[-1].minor.yy328);} + break; + case 249: /* cmd ::= VACUUM */ + case 250: /* cmd ::= VACUUM nm */ yytestcase(yyruleno==250); +{sqlite3Vacuum(pParse);} + break; + case 251: /* cmd ::= PRAGMA nm dbnm */ +{sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);} + break; + case 252: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ +{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);} + break; + case 253: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ +{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);} + break; + case 254: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ +{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);} + break; + case 255: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ +{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);} + break; + case 264: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ +{ + Token all; + all.z = yymsp[-3].minor.yy0.z; + all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n; + sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy473, &all); +} + break; + case 265: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ +{ + sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy328, yymsp[-4].minor.yy378.a, yymsp[-4].minor.yy378.b, yymsp[-2].minor.yy65, yymsp[0].minor.yy132, yymsp[-10].minor.yy328, yymsp[-8].minor.yy328); + yygotominor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); +} + break; + case 266: /* trigger_time ::= BEFORE */ + case 269: /* trigger_time ::= */ yytestcase(yyruleno==269); +{ yygotominor.yy328 = TK_BEFORE; } + break; + case 267: /* trigger_time ::= AFTER */ +{ yygotominor.yy328 = TK_AFTER; } + break; + case 268: /* trigger_time ::= INSTEAD OF */ +{ yygotominor.yy328 = TK_INSTEAD;} + break; + case 270: /* trigger_event ::= DELETE|INSERT */ + case 271: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==271); +{yygotominor.yy378.a = yymsp[0].major; yygotominor.yy378.b = 0;} + break; + case 272: /* trigger_event ::= UPDATE OF idlist */ +{yygotominor.yy378.a = TK_UPDATE; yygotominor.yy378.b = yymsp[0].minor.yy408;} + break; + case 275: /* when_clause ::= */ + case 296: /* key_opt ::= */ yytestcase(yyruleno==296); +{ yygotominor.yy132 = 0; } + break; + case 276: /* when_clause ::= WHEN expr */ + case 297: /* key_opt ::= KEY expr */ yytestcase(yyruleno==297); +{ yygotominor.yy132 = yymsp[0].minor.yy346.pExpr; } + break; + case 277: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ +{ + assert( yymsp[-2].minor.yy473!=0 ); + yymsp[-2].minor.yy473->pLast->pNext = yymsp[-1].minor.yy473; + yymsp[-2].minor.yy473->pLast = yymsp[-1].minor.yy473; + yygotominor.yy473 = yymsp[-2].minor.yy473; +} + break; + case 278: /* trigger_cmd_list ::= trigger_cmd SEMI */ +{ + assert( yymsp[-1].minor.yy473!=0 ); + yymsp[-1].minor.yy473->pLast = yymsp[-1].minor.yy473; + yygotominor.yy473 = yymsp[-1].minor.yy473; +} + break; + case 280: /* trnm ::= nm DOT nm */ +{ + yygotominor.yy0 = yymsp[0].minor.yy0; + sqlite3ErrorMsg(pParse, + "qualified table names are not allowed on INSERT, UPDATE, and DELETE " + "statements within triggers"); +} + break; + case 282: /* tridxby ::= INDEXED BY nm */ +{ + sqlite3ErrorMsg(pParse, + "the INDEXED BY clause is not allowed on UPDATE or DELETE statements " + "within triggers"); +} + break; + case 283: /* tridxby ::= NOT INDEXED */ +{ + sqlite3ErrorMsg(pParse, + "the NOT INDEXED clause is not allowed on UPDATE or DELETE statements " + "within triggers"); +} + break; + case 284: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */ +{ yygotominor.yy473 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy14, yymsp[0].minor.yy132, yymsp[-5].minor.yy186); } + break; + case 285: /* trigger_cmd ::= insert_cmd INTO trnm inscollist_opt select */ +{yygotominor.yy473 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy408, yymsp[0].minor.yy3, yymsp[-4].minor.yy186);} + break; + case 286: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */ +{yygotominor.yy473 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy132);} + break; + case 287: /* trigger_cmd ::= select */ +{yygotominor.yy473 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy3); } + break; + case 288: /* expr ::= RAISE LP IGNORE RP */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, 0); + if( yygotominor.yy346.pExpr ){ + yygotominor.yy346.pExpr->affinity = OE_Ignore; + } + yygotominor.yy346.zStart = yymsp[-3].minor.yy0.z; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; +} + break; + case 289: /* expr ::= RAISE LP raisetype COMMA nm RP */ +{ + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, &yymsp[-1].minor.yy0); + if( yygotominor.yy346.pExpr ) { + yygotominor.yy346.pExpr->affinity = (char)yymsp[-3].minor.yy328; + } + yygotominor.yy346.zStart = yymsp[-5].minor.yy0.z; + yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; +} + break; + case 290: /* raisetype ::= ROLLBACK */ +{yygotominor.yy328 = OE_Rollback;} + break; + case 292: /* raisetype ::= FAIL */ +{yygotominor.yy328 = OE_Fail;} + break; + case 293: /* cmd ::= DROP TRIGGER ifexists fullname */ +{ + sqlite3DropTrigger(pParse,yymsp[0].minor.yy65,yymsp[-1].minor.yy328); +} + break; + case 294: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ +{ + sqlite3Attach(pParse, yymsp[-3].minor.yy346.pExpr, yymsp[-1].minor.yy346.pExpr, yymsp[0].minor.yy132); +} + break; + case 295: /* cmd ::= DETACH database_kw_opt expr */ +{ + sqlite3Detach(pParse, yymsp[0].minor.yy346.pExpr); +} + break; + case 300: /* cmd ::= REINDEX */ +{sqlite3Reindex(pParse, 0, 0);} + break; + case 301: /* cmd ::= REINDEX nm dbnm */ +{sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} + break; + case 302: /* cmd ::= ANALYZE */ +{sqlite3Analyze(pParse, 0, 0);} + break; + case 303: /* cmd ::= ANALYZE nm dbnm */ +{sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} + break; + case 304: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ +{ + sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy65,&yymsp[0].minor.yy0); +} + break; + case 305: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column */ +{ + sqlite3AlterFinishAddColumn(pParse, &yymsp[0].minor.yy0); +} + break; + case 306: /* add_column_fullname ::= fullname */ +{ + pParse->db->lookaside.bEnabled = 0; + sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy65); +} + break; + case 309: /* cmd ::= create_vtab */ +{sqlite3VtabFinishParse(pParse,0);} + break; + case 310: /* cmd ::= create_vtab LP vtabarglist RP */ +{sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);} + break; + case 311: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ +{ + sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy328); +} + break; + case 314: /* vtabarg ::= */ +{sqlite3VtabArgInit(pParse);} + break; + case 316: /* vtabargtoken ::= ANY */ + case 317: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==317); + case 318: /* lp ::= LP */ yytestcase(yyruleno==318); +{sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);} + break; + case 322: /* with ::= */ +{yygotominor.yy59 = 0;} + break; + case 323: /* with ::= WITH wqlist */ + case 324: /* with ::= WITH RECURSIVE wqlist */ yytestcase(yyruleno==324); +{ yygotominor.yy59 = yymsp[0].minor.yy59; } + break; + case 325: /* wqlist ::= nm idxlist_opt AS LP select RP */ +{ + yygotominor.yy59 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy14, yymsp[-1].minor.yy3); +} + break; + case 326: /* wqlist ::= wqlist COMMA nm idxlist_opt AS LP select RP */ +{ + yygotominor.yy59 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy59, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy14, yymsp[-1].minor.yy3); +} + break; + default: + /* (0) input ::= cmdlist */ yytestcase(yyruleno==0); + /* (1) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==1); + /* (2) cmdlist ::= ecmd */ yytestcase(yyruleno==2); + /* (3) ecmd ::= SEMI */ yytestcase(yyruleno==3); + /* (4) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==4); + /* (10) trans_opt ::= */ yytestcase(yyruleno==10); + /* (11) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==11); + /* (12) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==12); + /* (20) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==20); + /* (21) savepoint_opt ::= */ yytestcase(yyruleno==21); + /* (25) cmd ::= create_table create_table_args */ yytestcase(yyruleno==25); + /* (36) columnlist ::= columnlist COMMA column */ yytestcase(yyruleno==36); + /* (37) columnlist ::= column */ yytestcase(yyruleno==37); + /* (43) type ::= */ yytestcase(yyruleno==43); + /* (50) signed ::= plus_num */ yytestcase(yyruleno==50); + /* (51) signed ::= minus_num */ yytestcase(yyruleno==51); + /* (52) carglist ::= carglist ccons */ yytestcase(yyruleno==52); + /* (53) carglist ::= */ yytestcase(yyruleno==53); + /* (60) ccons ::= NULL onconf */ yytestcase(yyruleno==60); + /* (88) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==88); + /* (89) conslist ::= tcons */ yytestcase(yyruleno==89); + /* (91) tconscomma ::= */ yytestcase(yyruleno==91); + /* (273) foreach_clause ::= */ yytestcase(yyruleno==273); + /* (274) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==274); + /* (281) tridxby ::= */ yytestcase(yyruleno==281); + /* (298) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==298); + /* (299) database_kw_opt ::= */ yytestcase(yyruleno==299); + /* (307) kwcolumn_opt ::= */ yytestcase(yyruleno==307); + /* (308) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==308); + /* (312) vtabarglist ::= vtabarg */ yytestcase(yyruleno==312); + /* (313) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==313); + /* (315) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==315); + /* (319) anylist ::= */ yytestcase(yyruleno==319); + /* (320) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==320); + /* (321) anylist ::= anylist ANY */ yytestcase(yyruleno==321); + break; + }; + assert( yyruleno>=0 && yyrulenoyyidx -= yysize; + yyact = yy_find_reduce_action(yymsp[-yysize].stateno,(YYCODETYPE)yygoto); + if( yyact < YYNSTATE ){ +#ifdef NDEBUG + /* If we are not debugging and the reduce action popped at least + ** one element off the stack, then we can push the new element back + ** onto the stack here, and skip the stack overflow test in yy_shift(). + ** That gives a significant speed improvement. */ + if( yysize ){ + yypParser->yyidx++; + yymsp -= yysize-1; + yymsp->stateno = (YYACTIONTYPE)yyact; + yymsp->major = (YYCODETYPE)yygoto; + yymsp->minor = yygotominor; + }else +#endif + { + yy_shift(yypParser,yyact,yygoto,&yygotominor); } - }else if( pLevel->plan.wsFlags & (WHERE_COLUMN_RANGE|WHERE_COLUMN_EQ) ){ - /* Case 3: A scan using an index. - ** - ** The WHERE clause may contain zero or more equality - ** terms ("==" or "IN" operators) that refer to the N - ** left-most columns of the index. It may also contain - ** inequality constraints (>, <, >= or <=) on the indexed - ** column that immediately follows the N equalities. Only - ** the right-most column can be an inequality - the rest must - ** use the "==" and "IN" operators. For example, if the - ** index is on (x,y,z), then the following clauses are all - ** optimized: - ** - ** x=5 - ** x=5 AND y=10 - ** x=5 AND y<10 - ** x=5 AND y>5 AND y<10 - ** x=5 AND y=5 AND z<=10 - ** - ** The z<10 term of the following cannot be used, only - ** the x=5 term: - ** - ** x=5 AND z<10 - ** - ** N may be zero if there are inequality constraints. - ** If there are no inequality constraints, then N is at - ** least one. - ** - ** This case is also used when there are no WHERE clause - ** constraints but an index is selected anyway, in order - ** to force the output order to conform to an ORDER BY. - */ - static const u8 aStartOp[] = { - 0, - 0, - OP_Rewind, /* 2: (!start_constraints && startEq && !bRev) */ - OP_Last, /* 3: (!start_constraints && startEq && bRev) */ - OP_SeekGt, /* 4: (start_constraints && !startEq && !bRev) */ - OP_SeekLt, /* 5: (start_constraints && !startEq && bRev) */ - OP_SeekGe, /* 6: (start_constraints && startEq && !bRev) */ - OP_SeekLe /* 7: (start_constraints && startEq && bRev) */ - }; - static const u8 aEndOp[] = { - OP_Noop, /* 0: (!end_constraints) */ - OP_IdxGE, /* 1: (end_constraints && !bRev) */ - OP_IdxLT /* 2: (end_constraints && bRev) */ - }; - int nEq = pLevel->plan.nEq; /* Number of == or IN terms */ - int isMinQuery = 0; /* If this is an optimized SELECT min(x).. */ - int regBase; /* Base register holding constraint values */ - int r1; /* Temp register */ - WhereTerm *pRangeStart = 0; /* Inequality constraint at range start */ - WhereTerm *pRangeEnd = 0; /* Inequality constraint at range end */ - int startEq; /* True if range start uses ==, >= or <= */ - int endEq; /* True if range end uses ==, >= or <= */ - int start_constraints; /* Start of range is constrained */ - int nConstraint; /* Number of constraint terms */ - Index *pIdx; /* The index we will be using */ - int iIdxCur; /* The VDBE cursor for the index */ - int nExtraReg = 0; /* Number of extra registers needed */ - int op; /* Instruction opcode */ - char *zStartAff; /* Affinity for start of range constraint */ - char *zEndAff; /* Affinity for end of range constraint */ + }else{ + assert( yyact == YYNSTATE + YYNRULE + 1 ); + yy_accept(yypParser); + } +} - pIdx = pLevel->plan.u.pIdx; - iIdxCur = pLevel->iIdxCur; - k = pIdx->aiColumn[nEq]; /* Column for inequality constraints */ +/* +** The following code executes when the parse fails +*/ +#ifndef YYNOERRORRECOVERY +static void yy_parse_failed( + yyParser *yypParser /* The parser */ +){ + sqlite3ParserARG_FETCH; +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt); + } +#endif + while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser); + /* Here code is inserted which will be executed whenever the + ** parser fails */ + sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ +} +#endif /* YYNOERRORRECOVERY */ - /* If this loop satisfies a sort order (pOrderBy) request that - ** was passed to this function to implement a "SELECT min(x) ..." - ** query, then the caller will only allow the loop to run for - ** a single iteration. This means that the first row returned - ** should not have a NULL value stored in 'x'. If column 'x' is - ** the first one after the nEq equality constraints in the index, - ** this requires some special handling. - */ - if( (wctrlFlags&WHERE_ORDERBY_MIN)!=0 - && (pLevel->plan.wsFlags&WHERE_ORDERBY) - && (pIdx->nColumn>nEq) - ){ - /* assert( pOrderBy->nExpr==1 ); */ - /* assert( pOrderBy->a[0].pExpr->iColumn==pIdx->aiColumn[nEq] ); */ - isMinQuery = 1; - nExtraReg = 1; - } +/* +** The following code executes when a syntax error first occurs. +*/ +static void yy_syntax_error( + yyParser *yypParser, /* The parser */ + int yymajor, /* The major type of the error token */ + YYMINORTYPE yyminor /* The minor type of the error token */ +){ + sqlite3ParserARG_FETCH; +#define TOKEN (yyminor.yy0) - /* Find any inequality constraint terms for the start and end - ** of the range. - */ - if( pLevel->plan.wsFlags & WHERE_TOP_LIMIT ){ - pRangeEnd = findTerm(pWC, iCur, k, notReady, (WO_LT|WO_LE), pIdx); - nExtraReg = 1; - } - if( pLevel->plan.wsFlags & WHERE_BTM_LIMIT ){ - pRangeStart = findTerm(pWC, iCur, k, notReady, (WO_GT|WO_GE), pIdx); - nExtraReg = 1; - } + UNUSED_PARAMETER(yymajor); /* Silence some compiler warnings */ + assert( TOKEN.z[0] ); /* The tokenizer always gives us a token */ + sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); + sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ +} - /* Generate code to evaluate all constraint terms using == or IN - ** and store the values of those terms in an array of registers - ** starting at regBase. - */ - regBase = codeAllEqualityTerms( - pParse, pLevel, pWC, notReady, nExtraReg, &zStartAff - ); - zEndAff = sqlite3DbStrDup(pParse->db, zStartAff); - addrNxt = pLevel->addrNxt; +/* +** The following is executed when the parser accepts +*/ +static void yy_accept( + yyParser *yypParser /* The parser */ +){ + sqlite3ParserARG_FETCH; +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt); + } +#endif + while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser); + /* Here code is inserted which will be executed whenever the + ** parser accepts */ + sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ +} - /* If we are doing a reverse order scan on an ascending index, or - ** a forward order scan on a descending index, interchange the - ** start and end terms (pRangeStart and pRangeEnd). - */ - if( nEqnColumn && bRev==(pIdx->aSortOrder[nEq]==SQLITE_SO_ASC) ){ - SWAP(WhereTerm *, pRangeEnd, pRangeStart); +/* The main parser program. +** The first argument is a pointer to a structure obtained from +** "sqlite3ParserAlloc" which describes the current state of the parser. +** The second argument is the major token number. The third is +** the minor token. The fourth optional argument is whatever the +** user wants (and specified in the grammar) and is available for +** use by the action routines. +** +** Inputs: +**
    +**
  • A pointer to the parser (an opaque structure.) +**
  • The major token number. +**
  • The minor token number. +**
  • An option argument of a grammar-specified type. +**
+** +** Outputs: +** None. +*/ +SQLITE_PRIVATE void sqlite3Parser( + void *yyp, /* The parser */ + int yymajor, /* The major token code number */ + sqlite3ParserTOKENTYPE yyminor /* The value for the token */ + sqlite3ParserARG_PDECL /* Optional %extra_argument parameter */ +){ + YYMINORTYPE yyminorunion; + int yyact; /* The parser action. */ +#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) + int yyendofinput; /* True if we are at the end of input */ +#endif +#ifdef YYERRORSYMBOL + int yyerrorhit = 0; /* True if yymajor has invoked an error */ +#endif + yyParser *yypParser; /* The parser */ + + /* (re)initialize the parser, if necessary */ + yypParser = (yyParser*)yyp; + if( yypParser->yyidx<0 ){ +#if YYSTACKDEPTH<=0 + if( yypParser->yystksz <=0 ){ + /*memset(&yyminorunion, 0, sizeof(yyminorunion));*/ + yyminorunion = yyzerominor; + yyStackOverflow(yypParser, &yyminorunion); + return; } +#endif + yypParser->yyidx = 0; + yypParser->yyerrcnt = -1; + yypParser->yystack[0].stateno = 0; + yypParser->yystack[0].major = 0; + } + yyminorunion.yy0 = yyminor; +#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) + yyendofinput = (yymajor==0); +#endif + sqlite3ParserARG_STORE; - testcase( pRangeStart && pRangeStart->eOperator & WO_LE ); - testcase( pRangeStart && pRangeStart->eOperator & WO_GE ); - testcase( pRangeEnd && pRangeEnd->eOperator & WO_LE ); - testcase( pRangeEnd && pRangeEnd->eOperator & WO_GE ); - startEq = !pRangeStart || pRangeStart->eOperator & (WO_LE|WO_GE); - endEq = !pRangeEnd || pRangeEnd->eOperator & (WO_LE|WO_GE); - start_constraints = pRangeStart || nEq>0; +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sInput %s\n",yyTracePrompt,yyTokenName[yymajor]); + } +#endif - /* Seek the index cursor to the start of the range. */ - nConstraint = nEq; - if( pRangeStart ){ - Expr *pRight = pRangeStart->pExpr->pRight; - sqlite3ExprCode(pParse, pRight, regBase+nEq); - if( (pRangeStart->wtFlags & TERM_VNULL)==0 ){ - sqlite3ExprCodeIsNullJump(v, pRight, regBase+nEq, addrNxt); + do{ + yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor); + if( yyactyyerrcnt--; + yymajor = YYNOCODE; + }else if( yyact < YYNSTATE + YYNRULE ){ + yy_reduce(yypParser,yyact-YYNSTATE); + }else{ + assert( yyact == YY_ERROR_ACTION ); +#ifdef YYERRORSYMBOL + int yymx; +#endif +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sSyntax Error!\n",yyTracePrompt); } - if( zStartAff ){ - if( sqlite3CompareAffinity(pRight, zStartAff[nEq])==SQLITE_AFF_NONE){ - /* Since the comparison is to be performed with no conversions - ** applied to the operands, set the affinity to apply to pRight to - ** SQLITE_AFF_NONE. */ - zStartAff[nEq] = SQLITE_AFF_NONE; - } - if( sqlite3ExprNeedsNoAffinityChange(pRight, zStartAff[nEq]) ){ - zStartAff[nEq] = SQLITE_AFF_NONE; - } - } - nConstraint++; - testcase( pRangeStart->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - }else if( isMinQuery ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq); - nConstraint++; - startEq = 0; - start_constraints = 1; - } - codeApplyAffinity(pParse, regBase, nConstraint, zStartAff); - op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev]; - assert( op!=0 ); - testcase( op==OP_Rewind ); - testcase( op==OP_Last ); - testcase( op==OP_SeekGt ); - testcase( op==OP_SeekGe ); - testcase( op==OP_SeekLe ); - testcase( op==OP_SeekLt ); - sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint); - - /* Load the value for the inequality constraint at the end of the - ** range (if any). - */ - nConstraint = nEq; - if( pRangeEnd ){ - Expr *pRight = pRangeEnd->pExpr->pRight; - sqlite3ExprCacheRemove(pParse, regBase+nEq, 1); - sqlite3ExprCode(pParse, pRight, regBase+nEq); - if( (pRangeEnd->wtFlags & TERM_VNULL)==0 ){ - sqlite3ExprCodeIsNullJump(v, pRight, regBase+nEq, addrNxt); +#endif +#ifdef YYERRORSYMBOL + /* A syntax error has occurred. + ** The response to an error depends upon whether or not the + ** grammar defines an error token "ERROR". + ** + ** This is what we do if the grammar does define ERROR: + ** + ** * Call the %syntax_error function. + ** + ** * Begin popping the stack until we enter a state where + ** it is legal to shift the error symbol, then shift + ** the error symbol. + ** + ** * Set the error count to three. + ** + ** * Begin accepting and shifting new tokens. No new error + ** processing will occur until three tokens have been + ** shifted successfully. + ** + */ + if( yypParser->yyerrcnt<0 ){ + yy_syntax_error(yypParser,yymajor,yyminorunion); } - if( zEndAff ){ - if( sqlite3CompareAffinity(pRight, zEndAff[nEq])==SQLITE_AFF_NONE){ - /* Since the comparison is to be performed with no conversions - ** applied to the operands, set the affinity to apply to pRight to - ** SQLITE_AFF_NONE. */ - zEndAff[nEq] = SQLITE_AFF_NONE; + yymx = yypParser->yystack[yypParser->yyidx].major; + if( yymx==YYERRORSYMBOL || yyerrorhit ){ +#ifndef NDEBUG + if( yyTraceFILE ){ + fprintf(yyTraceFILE,"%sDiscard input token %s\n", + yyTracePrompt,yyTokenName[yymajor]); } - if( sqlite3ExprNeedsNoAffinityChange(pRight, zEndAff[nEq]) ){ - zEndAff[nEq] = SQLITE_AFF_NONE; +#endif + yy_destructor(yypParser, (YYCODETYPE)yymajor,&yyminorunion); + yymajor = YYNOCODE; + }else{ + while( + yypParser->yyidx >= 0 && + yymx != YYERRORSYMBOL && + (yyact = yy_find_reduce_action( + yypParser->yystack[yypParser->yyidx].stateno, + YYERRORSYMBOL)) >= YYNSTATE + ){ + yy_pop_parser_stack(yypParser); } - } - codeApplyAffinity(pParse, regBase, nEq+1, zEndAff); - nConstraint++; - testcase( pRangeEnd->wtFlags & TERM_VIRTUAL ); /* EV: R-30575-11662 */ - } - sqlite3DbFree(pParse->db, zStartAff); - sqlite3DbFree(pParse->db, zEndAff); - - /* Top of the loop body */ - pLevel->p2 = sqlite3VdbeCurrentAddr(v); - - /* Check if the index cursor is past the end of the range. */ - op = aEndOp[(pRangeEnd || nEq) * (1 + bRev)]; - testcase( op==OP_Noop ); - testcase( op==OP_IdxGE ); - testcase( op==OP_IdxLT ); - if( op!=OP_Noop ){ - sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint); - sqlite3VdbeChangeP5(v, endEq!=bRev ?1:0); - } - - /* If there are inequality constraints, check that the value - ** of the table column that the inequality contrains is not NULL. - ** If it is, jump to the next iteration of the loop. - */ - r1 = sqlite3GetTempReg(pParse); - testcase( pLevel->plan.wsFlags & WHERE_BTM_LIMIT ); - testcase( pLevel->plan.wsFlags & WHERE_TOP_LIMIT ); - if( (pLevel->plan.wsFlags & (WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))!=0 ){ - sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, nEq, r1); - sqlite3VdbeAddOp2(v, OP_IsNull, r1, addrCont); - } - sqlite3ReleaseTempReg(pParse, r1); - - /* Seek the table cursor, if required */ - disableTerm(pLevel, pRangeStart); - disableTerm(pLevel, pRangeEnd); - if( !omitTable ){ - iRowidReg = iReleaseReg = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); - sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg); /* Deferred seek */ - } - - /* Record the instruction used to terminate the loop. Disable - ** WHERE clause terms made redundant by the index range scan. - */ - if( pLevel->plan.wsFlags & WHERE_UNIQUE ){ - pLevel->op = OP_Noop; - }else if( bRev ){ - pLevel->op = OP_Prev; - }else{ - pLevel->op = OP_Next; - } - pLevel->p1 = iIdxCur; - }else - -#ifndef SQLITE_OMIT_OR_OPTIMIZATION - if( pLevel->plan.wsFlags & WHERE_MULTI_OR ){ - /* Case 4: Two or more separately indexed terms connected by OR - ** - ** Example: - ** - ** CREATE TABLE t1(a,b,c,d); - ** CREATE INDEX i1 ON t1(a); - ** CREATE INDEX i2 ON t1(b); - ** CREATE INDEX i3 ON t1(c); - ** - ** SELECT * FROM t1 WHERE a=5 OR b=7 OR (c=11 AND d=13) - ** - ** In the example, there are three indexed terms connected by OR. - ** The top of the loop looks like this: - ** - ** Null 1 # Zero the rowset in reg 1 - ** - ** Then, for each indexed term, the following. The arguments to - ** RowSetTest are such that the rowid of the current row is inserted - ** into the RowSet. If it is already present, control skips the - ** Gosub opcode and jumps straight to the code generated by WhereEnd(). - ** - ** sqlite3WhereBegin() - ** RowSetTest # Insert rowid into rowset - ** Gosub 2 A - ** sqlite3WhereEnd() - ** - ** Following the above, code to terminate the loop. Label A, the target - ** of the Gosub above, jumps to the instruction right after the Goto. - ** - ** Null 1 # Zero the rowset in reg 1 - ** Goto B # The loop is finished. - ** - ** A: # Return data, whatever. - ** - ** Return 2 # Jump back to the Gosub - ** - ** B: - ** - */ - WhereClause *pOrWc; /* The OR-clause broken out into subterms */ - SrcList *pOrTab; /* Shortened table list or OR-clause generation */ - - int regReturn = ++pParse->nMem; /* Register used with OP_Gosub */ - int regRowset = 0; /* Register for RowSet object */ - int regRowid = 0; /* Register holding rowid */ - int iLoopBody = sqlite3VdbeMakeLabel(v); /* Start of loop body */ - int iRetInit; /* Address of regReturn init */ - int untestedTerms = 0; /* Some terms not completely tested */ - int ii; - - pTerm = pLevel->plan.u.pTerm; - assert( pTerm!=0 ); - assert( pTerm->eOperator==WO_OR ); - assert( (pTerm->wtFlags & TERM_ORINFO)!=0 ); - pOrWc = &pTerm->u.pOrInfo->wc; - pLevel->op = OP_Return; - pLevel->p1 = regReturn; - - /* Set up a new SrcList ni pOrTab containing the table being scanned - ** by this loop in the a[0] slot and all notReady tables in a[1..] slots. - ** This becomes the SrcList in the recursive call to sqlite3WhereBegin(). - */ - if( pWInfo->nLevel>1 ){ - int nNotReady; /* The number of notReady tables */ - struct SrcList_item *origSrc; /* Original list of tables */ - nNotReady = pWInfo->nLevel - iLevel - 1; - pOrTab = sqlite3StackAllocRaw(pParse->db, - sizeof(*pOrTab)+ nNotReady*sizeof(pOrTab->a[0])); - if( pOrTab==0 ) return notReady; - pOrTab->nAlloc = (i16)(nNotReady + 1); - pOrTab->nSrc = pOrTab->nAlloc; - memcpy(pOrTab->a, pTabItem, sizeof(*pTabItem)); - origSrc = pWInfo->pTabList->a; - for(k=1; k<=nNotReady; k++){ - memcpy(&pOrTab->a[k], &origSrc[pLevel[k].iFrom], sizeof(pOrTab->a[k])); - } - }else{ - pOrTab = pWInfo->pTabList; - } - - /* Initialize the rowset register to contain NULL. An SQL NULL is - ** equivalent to an empty rowset. - ** - ** Also initialize regReturn to contain the address of the instruction - ** immediately following the OP_Return at the bottom of the loop. This - ** is required in a few obscure LEFT JOIN cases where control jumps - ** over the top of the loop into the body of it. In this case the - ** correct response for the end-of-loop code (the OP_Return) is to - ** fall through to the next instruction, just as an OP_Next does if - ** called on an uninitialized cursor. - */ - if( (wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ - regRowset = ++pParse->nMem; - regRowid = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset); - } - iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn); - - for(ii=0; iinTerm; ii++){ - WhereTerm *pOrTerm = &pOrWc->a[ii]; - if( pOrTerm->leftCursor==iCur || pOrTerm->eOperator==WO_AND ){ - WhereInfo *pSubWInfo; /* Info for single OR-term scan */ - /* Loop through table entries that match term pOrTerm. */ - pSubWInfo = sqlite3WhereBegin(pParse, pOrTab, pOrTerm->pExpr, 0, - WHERE_OMIT_OPEN | WHERE_OMIT_CLOSE | - WHERE_FORCE_TABLE | WHERE_ONETABLE_ONLY); - if( pSubWInfo ){ - explainOneScan( - pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0 - ); - if( (wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ - int iSet = ((ii==pOrWc->nTerm-1)?-1:ii); - int r; - r = sqlite3ExprCodeGetColumn(pParse, pTabItem->pTab, -1, iCur, - regRowid); - sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, - sqlite3VdbeCurrentAddr(v)+2, r, iSet); - } - sqlite3VdbeAddOp2(v, OP_Gosub, regReturn, iLoopBody); - - /* The pSubWInfo->untestedTerms flag means that this OR term - ** contained one or more AND term from a notReady table. The - ** terms from the notReady table could not be tested and will - ** need to be tested later. - */ - if( pSubWInfo->untestedTerms ) untestedTerms = 1; - - /* Finish the loop through table entries that match term pOrTerm. */ - sqlite3WhereEnd(pSubWInfo); + if( yypParser->yyidx < 0 || yymajor==0 ){ + yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); + yy_parse_failed(yypParser); + yymajor = YYNOCODE; + }else if( yymx!=YYERRORSYMBOL ){ + YYMINORTYPE u2; + u2.YYERRSYMDT = 0; + yy_shift(yypParser,yyact,YYERRORSYMBOL,&u2); } } - } - sqlite3VdbeChangeP1(v, iRetInit, sqlite3VdbeCurrentAddr(v)); - sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrBrk); - sqlite3VdbeResolveLabel(v, iLoopBody); - - if( pWInfo->nLevel>1 ) sqlite3StackFree(pParse->db, pOrTab); - if( !untestedTerms ) disableTerm(pLevel, pTerm); - }else -#endif /* SQLITE_OMIT_OR_OPTIMIZATION */ - - { - /* Case 5: There is no usable index. We must do a complete - ** scan of the entire table. - */ - static const u8 aStep[] = { OP_Next, OP_Prev }; - static const u8 aStart[] = { OP_Rewind, OP_Last }; - assert( bRev==0 || bRev==1 ); - assert( omitTable==0 ); - pLevel->op = aStep[bRev]; - pLevel->p1 = iCur; - pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrBrk); - pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; - } - notReady &= ~getMask(pWC->pMaskSet, iCur); - - /* Insert code to test every subexpression that can be completely - ** computed using the current set of tables. - ** - ** IMPLEMENTATION-OF: R-49525-50935 Terms that cannot be satisfied through - ** the use of indices become tests that are evaluated against each row of - ** the relevant input tables. - */ - for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){ - Expr *pE; - testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* IMP: R-30575-11662 */ - testcase( pTerm->wtFlags & TERM_CODED ); - if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; - if( (pTerm->prereqAll & notReady)!=0 ){ - testcase( pWInfo->untestedTerms==0 - && (pWInfo->wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ); - pWInfo->untestedTerms = 1; - continue; - } - pE = pTerm->pExpr; - assert( pE!=0 ); - if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){ - continue; - } - sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL); - pTerm->wtFlags |= TERM_CODED; - } - - /* For a LEFT OUTER JOIN, generate code that will record the fact that - ** at least one row of the right table has matched the left table. - */ - if( pLevel->iLeftJoin ){ - pLevel->addrFirst = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp2(v, OP_Integer, 1, pLevel->iLeftJoin); - VdbeComment((v, "record LEFT JOIN hit")); - sqlite3ExprCacheClear(pParse); - for(pTerm=pWC->a, j=0; jnTerm; j++, pTerm++){ - testcase( pTerm->wtFlags & TERM_VIRTUAL ); /* IMP: R-30575-11662 */ - testcase( pTerm->wtFlags & TERM_CODED ); - if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; - if( (pTerm->prereqAll & notReady)!=0 ){ - assert( pWInfo->untestedTerms ); - continue; + yypParser->yyerrcnt = 3; + yyerrorhit = 1; +#elif defined(YYNOERRORRECOVERY) + /* If the YYNOERRORRECOVERY macro is defined, then do not attempt to + ** do any kind of error recovery. Instead, simply invoke the syntax + ** error routine and continue going as if nothing had happened. + ** + ** Applications can set this macro (for example inside %include) if + ** they intend to abandon the parse upon the first syntax error seen. + */ + yy_syntax_error(yypParser,yymajor,yyminorunion); + yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); + yymajor = YYNOCODE; + +#else /* YYERRORSYMBOL is not defined */ + /* This is what we do if the grammar does not define ERROR: + ** + ** * Report an error message, and throw away the input token. + ** + ** * If the input token is $, then fail the parse. + ** + ** As before, subsequent error messages are suppressed until + ** three input tokens have been successfully shifted. + */ + if( yypParser->yyerrcnt<=0 ){ + yy_syntax_error(yypParser,yymajor,yyminorunion); + } + yypParser->yyerrcnt = 3; + yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); + if( yyendofinput ){ + yy_parse_failed(yypParser); } - assert( pTerm->pExpr ); - sqlite3ExprIfFalse(pParse, pTerm->pExpr, addrCont, SQLITE_JUMPIFNULL); - pTerm->wtFlags |= TERM_CODED; + yymajor = YYNOCODE; +#endif } - } - sqlite3ReleaseTempReg(pParse, iReleaseReg); - - return notReady; + }while( yymajor!=YYNOCODE && yypParser->yyidx>=0 ); + return; } -#if defined(SQLITE_TEST) +/************** End of parse.c ***********************************************/ +/************** Begin file tokenize.c ****************************************/ /* -** The following variable holds a text description of query plan generated -** by the most recent call to sqlite3WhereBegin(). Each call to WhereBegin -** overwrites the previous. This information is used for testing and -** analysis only. +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** An tokenizer for SQL +** +** This file contains C code that splits an SQL input string up into +** individual tokens and sends those tokens one-by-one over to the +** parser for analysis. */ -SQLITE_API char sqlite3_query_plan[BMS*2*40]; /* Text of the join */ -static int nQPlan = 0; /* Next free slow in _query_plan[] */ - -#endif /* SQLITE_TEST */ +/* #include */ +/* +** The charMap() macro maps alphabetic characters into their +** lower-case ASCII equivalent. On ASCII machines, this is just +** an upper-to-lower case map. On EBCDIC machines we also need +** to adjust the encoding. Only alphabetic characters and underscores +** need to be translated. +*/ +#ifdef SQLITE_ASCII +# define charMap(X) sqlite3UpperToLower[(unsigned char)X] +#endif +#ifdef SQLITE_EBCDIC +# define charMap(X) ebcdicToAscii[(unsigned char)X] +const unsigned char ebcdicToAscii[] = { +/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 1x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 2x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 3x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 4x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 5x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 95, 0, 0, /* 6x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 7x */ + 0, 97, 98, 99,100,101,102,103,104,105, 0, 0, 0, 0, 0, 0, /* 8x */ + 0,106,107,108,109,110,111,112,113,114, 0, 0, 0, 0, 0, 0, /* 9x */ + 0, 0,115,116,117,118,119,120,121,122, 0, 0, 0, 0, 0, 0, /* Ax */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Bx */ + 0, 97, 98, 99,100,101,102,103,104,105, 0, 0, 0, 0, 0, 0, /* Cx */ + 0,106,107,108,109,110,111,112,113,114, 0, 0, 0, 0, 0, 0, /* Dx */ + 0, 0,115,116,117,118,119,120,121,122, 0, 0, 0, 0, 0, 0, /* Ex */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Fx */ +}; +#endif /* -** Free a WhereInfo structure +** The sqlite3KeywordCode function looks up an identifier to determine if +** it is a keyword. If it is a keyword, the token code of that keyword is +** returned. If the input is not a keyword, TK_ID is returned. +** +** The implementation of this routine was generated by a program, +** mkkeywordhash.h, located in the tool subdirectory of the distribution. +** The output of the mkkeywordhash.c program is written into a file +** named keywordhash.h and then included into this source file by +** the #include below. */ -static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){ - if( ALWAYS(pWInfo) ){ - int i; - for(i=0; inLevel; i++){ - sqlite3_index_info *pInfo = pWInfo->a[i].pIdxInfo; - if( pInfo ){ - /* assert( pInfo->needToFreeIdxStr==0 || db->mallocFailed ); */ - if( pInfo->needToFreeIdxStr ){ - sqlite3_free(pInfo->idxStr); - } - sqlite3DbFree(db, pInfo); - } - if( pWInfo->a[i].plan.wsFlags & WHERE_TEMP_INDEX ){ - Index *pIdx = pWInfo->a[i].plan.u.pIdx; - if( pIdx ){ - sqlite3DbFree(db, pIdx->zColAff); - sqlite3DbFree(db, pIdx); - } - } +/************** Include keywordhash.h in the middle of tokenize.c ************/ +/************** Begin file keywordhash.h *************************************/ +/***** This file contains automatically generated code ****** +** +** The code in this file has been automatically generated by +** +** sqlite/tool/mkkeywordhash.c +** +** The code in this file implements a function that determines whether +** or not a given identifier is really an SQL keyword. The same thing +** might be implemented more directly using a hand-written hash table. +** But by using this automatically generated code, the size of the code +** is substantially reduced. This is important for embedded applications +** on platforms with limited memory. +*/ +/* Hash score: 182 */ +static int keywordCode(const char *z, int n){ + /* zText[] encodes 834 bytes of keywords in 554 bytes */ + /* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */ + /* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */ + /* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */ + /* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */ + /* BETWEENOTNULLIKECASCADELETECASECOLLATECREATECURRENT_DATEDETACH */ + /* IMMEDIATEJOINSERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHEN */ + /* WHERENAMEAFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMIT */ + /* CONFLICTCROSSCURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAIL */ + /* FROMFULLGLOBYIFISNULLORDERESTRICTRIGHTROLLBACKROWUNIONUSING */ + /* VACUUMVIEWINITIALLY */ + static const char zText[553] = { + 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H', + 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G', + 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A', + 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F', + 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N', + 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I', + 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E', + 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E', + 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T', + 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q', + 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S', + 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A', + 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E', + 'B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C','A', + 'S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L','A', + 'T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D','A', + 'T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E','J', + 'O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A','L', + 'Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U','E', + 'S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W','H', + 'E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C','E', + 'A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R','E', + 'M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M','M', + 'I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U','R', + 'R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M','A', + 'R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T','D', + 'R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L','O', + 'B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T', + 'R','I','C','T','R','I','G','H','T','R','O','L','L','B','A','C','K','R', + 'O','W','U','N','I','O','N','U','S','I','N','G','V','A','C','U','U','M', + 'V','I','E','W','I','N','I','T','I','A','L','L','Y', + }; + static const unsigned char aHash[127] = { + 76, 105, 117, 74, 0, 45, 0, 0, 82, 0, 77, 0, 0, + 42, 12, 78, 15, 0, 116, 85, 54, 112, 0, 19, 0, 0, + 121, 0, 119, 115, 0, 22, 93, 0, 9, 0, 0, 70, 71, + 0, 69, 6, 0, 48, 90, 102, 0, 118, 101, 0, 0, 44, + 0, 103, 24, 0, 17, 0, 122, 53, 23, 0, 5, 110, 25, + 96, 0, 0, 124, 106, 60, 123, 57, 28, 55, 0, 91, 0, + 100, 26, 0, 99, 0, 0, 0, 95, 92, 97, 88, 109, 14, + 39, 108, 0, 81, 0, 18, 89, 111, 32, 0, 120, 80, 113, + 62, 46, 84, 0, 0, 94, 40, 59, 114, 0, 36, 0, 0, + 29, 0, 86, 63, 64, 0, 20, 61, 0, 56, + }; + static const unsigned char aNext[124] = { + 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, + 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50, + 0, 43, 3, 47, 0, 0, 0, 0, 30, 0, 58, 0, 38, + 0, 0, 0, 1, 66, 0, 0, 67, 0, 41, 0, 0, 0, + 0, 0, 0, 49, 65, 0, 0, 0, 0, 31, 52, 16, 34, + 10, 0, 0, 0, 0, 0, 0, 0, 11, 72, 79, 0, 8, + 0, 104, 98, 0, 107, 0, 87, 0, 75, 51, 0, 27, 37, + 73, 83, 0, 35, 68, 0, 0, + }; + static const unsigned char aLen[124] = { + 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6, + 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6, + 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10, + 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7, + 6, 6, 5, 6, 5, 5, 9, 7, 7, 3, 2, 4, 4, + 7, 3, 6, 4, 7, 6, 12, 6, 9, 4, 6, 5, 4, + 7, 6, 5, 6, 7, 5, 4, 5, 6, 5, 7, 3, 7, + 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, 7, 8, 8, + 2, 4, 4, 4, 4, 4, 2, 2, 6, 5, 8, 5, 8, + 3, 5, 5, 6, 4, 9, 3, + }; + static const unsigned short int aOffset[124] = { + 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33, + 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81, + 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152, + 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192, + 199, 204, 209, 212, 218, 221, 225, 234, 240, 240, 240, 243, 246, + 250, 251, 255, 261, 265, 272, 278, 290, 296, 305, 307, 313, 318, + 320, 327, 332, 337, 343, 349, 354, 358, 361, 367, 371, 378, 380, + 387, 389, 391, 400, 404, 410, 416, 424, 429, 429, 445, 452, 459, + 460, 467, 471, 475, 479, 483, 486, 488, 490, 496, 500, 508, 513, + 521, 524, 529, 534, 540, 544, 549, + }; + static const unsigned char aCode[124] = { + TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE, + TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN, + TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD, + TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE, + TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE, + TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW, + TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT, + TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO, + TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP, + TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH, + TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP, + TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN, + TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, TK_LIKE_KW, + TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, TK_COLLATE, + TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, TK_JOIN, + TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA, + TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN, + TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, TK_AND, + TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, TK_CAST, + TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW, + TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, TK_IS, + TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, TK_LIKE_KW, + TK_BY, TK_IF, TK_ISNULL, TK_ORDER, TK_RESTRICT, + TK_JOIN_KW, TK_ROLLBACK, TK_ROW, TK_UNION, TK_USING, + TK_VACUUM, TK_VIEW, TK_INITIALLY, TK_ALL, + }; + int h, i; + if( n<2 ) return TK_ID; + h = ((charMap(z[0])*4) ^ + (charMap(z[n-1])*3) ^ + n) % 127; + for(i=((int)aHash[h])-1; i>=0; i=((int)aNext[i])-1){ + if( aLen[i]==n && sqlite3StrNICmp(&zText[aOffset[i]],z,n)==0 ){ + testcase( i==0 ); /* REINDEX */ + testcase( i==1 ); /* INDEXED */ + testcase( i==2 ); /* INDEX */ + testcase( i==3 ); /* DESC */ + testcase( i==4 ); /* ESCAPE */ + testcase( i==5 ); /* EACH */ + testcase( i==6 ); /* CHECK */ + testcase( i==7 ); /* KEY */ + testcase( i==8 ); /* BEFORE */ + testcase( i==9 ); /* FOREIGN */ + testcase( i==10 ); /* FOR */ + testcase( i==11 ); /* IGNORE */ + testcase( i==12 ); /* REGEXP */ + testcase( i==13 ); /* EXPLAIN */ + testcase( i==14 ); /* INSTEAD */ + testcase( i==15 ); /* ADD */ + testcase( i==16 ); /* DATABASE */ + testcase( i==17 ); /* AS */ + testcase( i==18 ); /* SELECT */ + testcase( i==19 ); /* TABLE */ + testcase( i==20 ); /* LEFT */ + testcase( i==21 ); /* THEN */ + testcase( i==22 ); /* END */ + testcase( i==23 ); /* DEFERRABLE */ + testcase( i==24 ); /* ELSE */ + testcase( i==25 ); /* EXCEPT */ + testcase( i==26 ); /* TRANSACTION */ + testcase( i==27 ); /* ACTION */ + testcase( i==28 ); /* ON */ + testcase( i==29 ); /* NATURAL */ + testcase( i==30 ); /* ALTER */ + testcase( i==31 ); /* RAISE */ + testcase( i==32 ); /* EXCLUSIVE */ + testcase( i==33 ); /* EXISTS */ + testcase( i==34 ); /* SAVEPOINT */ + testcase( i==35 ); /* INTERSECT */ + testcase( i==36 ); /* TRIGGER */ + testcase( i==37 ); /* REFERENCES */ + testcase( i==38 ); /* CONSTRAINT */ + testcase( i==39 ); /* INTO */ + testcase( i==40 ); /* OFFSET */ + testcase( i==41 ); /* OF */ + testcase( i==42 ); /* SET */ + testcase( i==43 ); /* TEMPORARY */ + testcase( i==44 ); /* TEMP */ + testcase( i==45 ); /* OR */ + testcase( i==46 ); /* UNIQUE */ + testcase( i==47 ); /* QUERY */ + testcase( i==48 ); /* WITHOUT */ + testcase( i==49 ); /* WITH */ + testcase( i==50 ); /* OUTER */ + testcase( i==51 ); /* RELEASE */ + testcase( i==52 ); /* ATTACH */ + testcase( i==53 ); /* HAVING */ + testcase( i==54 ); /* GROUP */ + testcase( i==55 ); /* UPDATE */ + testcase( i==56 ); /* BEGIN */ + testcase( i==57 ); /* INNER */ + testcase( i==58 ); /* RECURSIVE */ + testcase( i==59 ); /* BETWEEN */ + testcase( i==60 ); /* NOTNULL */ + testcase( i==61 ); /* NOT */ + testcase( i==62 ); /* NO */ + testcase( i==63 ); /* NULL */ + testcase( i==64 ); /* LIKE */ + testcase( i==65 ); /* CASCADE */ + testcase( i==66 ); /* ASC */ + testcase( i==67 ); /* DELETE */ + testcase( i==68 ); /* CASE */ + testcase( i==69 ); /* COLLATE */ + testcase( i==70 ); /* CREATE */ + testcase( i==71 ); /* CURRENT_DATE */ + testcase( i==72 ); /* DETACH */ + testcase( i==73 ); /* IMMEDIATE */ + testcase( i==74 ); /* JOIN */ + testcase( i==75 ); /* INSERT */ + testcase( i==76 ); /* MATCH */ + testcase( i==77 ); /* PLAN */ + testcase( i==78 ); /* ANALYZE */ + testcase( i==79 ); /* PRAGMA */ + testcase( i==80 ); /* ABORT */ + testcase( i==81 ); /* VALUES */ + testcase( i==82 ); /* VIRTUAL */ + testcase( i==83 ); /* LIMIT */ + testcase( i==84 ); /* WHEN */ + testcase( i==85 ); /* WHERE */ + testcase( i==86 ); /* RENAME */ + testcase( i==87 ); /* AFTER */ + testcase( i==88 ); /* REPLACE */ + testcase( i==89 ); /* AND */ + testcase( i==90 ); /* DEFAULT */ + testcase( i==91 ); /* AUTOINCREMENT */ + testcase( i==92 ); /* TO */ + testcase( i==93 ); /* IN */ + testcase( i==94 ); /* CAST */ + testcase( i==95 ); /* COLUMN */ + testcase( i==96 ); /* COMMIT */ + testcase( i==97 ); /* CONFLICT */ + testcase( i==98 ); /* CROSS */ + testcase( i==99 ); /* CURRENT_TIMESTAMP */ + testcase( i==100 ); /* CURRENT_TIME */ + testcase( i==101 ); /* PRIMARY */ + testcase( i==102 ); /* DEFERRED */ + testcase( i==103 ); /* DISTINCT */ + testcase( i==104 ); /* IS */ + testcase( i==105 ); /* DROP */ + testcase( i==106 ); /* FAIL */ + testcase( i==107 ); /* FROM */ + testcase( i==108 ); /* FULL */ + testcase( i==109 ); /* GLOB */ + testcase( i==110 ); /* BY */ + testcase( i==111 ); /* IF */ + testcase( i==112 ); /* ISNULL */ + testcase( i==113 ); /* ORDER */ + testcase( i==114 ); /* RESTRICT */ + testcase( i==115 ); /* RIGHT */ + testcase( i==116 ); /* ROLLBACK */ + testcase( i==117 ); /* ROW */ + testcase( i==118 ); /* UNION */ + testcase( i==119 ); /* USING */ + testcase( i==120 ); /* VACUUM */ + testcase( i==121 ); /* VIEW */ + testcase( i==122 ); /* INITIALLY */ + testcase( i==123 ); /* ALL */ + return aCode[i]; } - whereClauseClear(pWInfo->pWC); - sqlite3DbFree(db, pWInfo); } + return TK_ID; +} +SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char *z, int n){ + return keywordCode((char*)z, n); } +#define SQLITE_N_KEYWORD 124 + +/************** End of keywordhash.h *****************************************/ +/************** Continuing where we left off in tokenize.c *******************/ /* -** Generate the beginning of the loop used for WHERE clause processing. -** The return value is a pointer to an opaque structure that contains -** information needed to terminate the loop. Later, the calling routine -** should invoke sqlite3WhereEnd() with the return value of this function -** in order to complete the WHERE clause processing. -** -** If an error occurs, this routine returns NULL. -** -** The basic idea is to do a nested loop, one loop for each table in -** the FROM clause of a select. (INSERT and UPDATE statements are the -** same as a SELECT with only a single table in the FROM clause.) For -** example, if the SQL is this: -** -** SELECT * FROM t1, t2, t3 WHERE ...; -** -** Then the code generated is conceptually like the following: -** -** foreach row1 in t1 do \ Code generated -** foreach row2 in t2 do |-- by sqlite3WhereBegin() -** foreach row3 in t3 do / -** ... -** end \ Code generated -** end |-- by sqlite3WhereEnd() -** end / -** -** Note that the loops might not be nested in the order in which they -** appear in the FROM clause if a different order is better able to make -** use of indices. Note also that when the IN operator appears in -** the WHERE clause, it might result in additional nested loops for -** scanning through all values on the right-hand side of the IN. -** -** There are Btree cursors associated with each table. t1 uses cursor -** number pTabList->a[0].iCursor. t2 uses the cursor pTabList->a[1].iCursor. -** And so forth. This routine generates code to open those VDBE cursors -** and sqlite3WhereEnd() generates the code to close them. -** -** The code that sqlite3WhereBegin() generates leaves the cursors named -** in pTabList pointing at their appropriate entries. The [...] code -** can use OP_Column and OP_Rowid opcodes on these cursors to extract -** data from the various tables of the loop. -** -** If the WHERE clause is empty, the foreach loops must each scan their -** entire tables. Thus a three-way join is an O(N^3) operation. But if -** the tables have indices and there are terms in the WHERE clause that -** refer to those indices, a complete table scan can be avoided and the -** code will run much faster. Most of the work of this routine is checking -** to see if there are indices that can be used to speed up the loop. -** -** Terms of the WHERE clause are also used to limit which rows actually -** make it to the "..." in the middle of the loop. After each "foreach", -** terms of the WHERE clause that use only terms in that loop and outer -** loops are evaluated and if false a jump is made around all subsequent -** inner loops (or around the "..." if the test occurs within the inner- -** most loop) -** -** OUTER JOINS -** -** An outer join of tables t1 and t2 is conceptally coded as follows: -** -** foreach row1 in t1 do -** flag = 0 -** foreach row2 in t2 do -** start: -** ... -** flag = 1 -** end -** if flag==0 then -** move the row2 cursor to a null row -** goto start -** fi -** end -** -** ORDER BY CLAUSE PROCESSING +** If X is a character that can be used in an identifier then +** IdChar(X) will be true. Otherwise it is false. ** -** *ppOrderBy is a pointer to the ORDER BY clause of a SELECT statement, -** if there is one. If there is no ORDER BY clause or if this routine -** is called from an UPDATE or DELETE statement, then ppOrderBy is NULL. +** For ASCII, any character with the high-order bit set is +** allowed in an identifier. For 7-bit characters, +** sqlite3IsIdChar[X] must be 1. ** -** If an index can be used so that the natural output order of the table -** scan is correct for the ORDER BY clause, then that index is used and -** *ppOrderBy is set to NULL. This is an optimization that prevents an -** unnecessary sort of the result set if an index appropriate for the -** ORDER BY clause already exists. +** For EBCDIC, the rules are more complex but have the same +** end result. ** -** If the where clause loops cannot be arranged to provide the correct -** output order, then the *ppOrderBy is unchanged. +** Ticket #1066. the SQL standard does not allow '$' in the +** middle of identifiers. But many SQL implementations do. +** SQLite will allow '$' in identifiers for compatibility. +** But the feature is undocumented. */ -SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( - Parse *pParse, /* The parser context */ - SrcList *pTabList, /* A list of all tables to be scanned */ - Expr *pWhere, /* The WHERE clause */ - ExprList **ppOrderBy, /* An ORDER BY clause, or NULL */ - u16 wctrlFlags /* One of the WHERE_* flags defined in sqliteInt.h */ -){ - int i; /* Loop counter */ - int nByteWInfo; /* Num. bytes allocated for WhereInfo struct */ - int nTabList; /* Number of elements in pTabList */ - WhereInfo *pWInfo; /* Will become the return value of this function */ - Vdbe *v = pParse->pVdbe; /* The virtual database engine */ - Bitmask notReady; /* Cursors that are not yet positioned */ - WhereMaskSet *pMaskSet; /* The expression mask set */ - WhereClause *pWC; /* Decomposition of the WHERE clause */ - struct SrcList_item *pTabItem; /* A single entry from pTabList */ - WhereLevel *pLevel; /* A single level in the pWInfo list */ - int iFrom; /* First unused FROM clause element */ - int andFlags; /* AND-ed combination of all pWC->a[].wtFlags */ - sqlite3 *db; /* Database connection */ - - /* The number of tables in the FROM clause is limited by the number of - ** bits in a Bitmask - */ - testcase( pTabList->nSrc==BMS ); - if( pTabList->nSrc>BMS ){ - sqlite3ErrorMsg(pParse, "at most %d tables in a join", BMS); - return 0; - } - - /* This function normally generates a nested loop for all tables in - ** pTabList. But if the WHERE_ONETABLE_ONLY flag is set, then we should - ** only generate code for the first table in pTabList and assume that - ** any cursors associated with subsequent tables are uninitialized. - */ - nTabList = (wctrlFlags & WHERE_ONETABLE_ONLY) ? 1 : pTabList->nSrc; - - /* Allocate and initialize the WhereInfo structure that will become the - ** return value. A single allocation is used to store the WhereInfo - ** struct, the contents of WhereInfo.a[], the WhereClause structure - ** and the WhereMaskSet structure. Since WhereClause contains an 8-byte - ** field (type Bitmask) it must be aligned on an 8-byte boundary on - ** some architectures. Hence the ROUND8() below. - */ - db = pParse->db; - nByteWInfo = ROUND8(sizeof(WhereInfo)+(nTabList-1)*sizeof(WhereLevel)); - pWInfo = sqlite3DbMallocZero(db, - nByteWInfo + - sizeof(WhereClause) + - sizeof(WhereMaskSet) - ); - if( db->mallocFailed ){ - sqlite3DbFree(db, pWInfo); - pWInfo = 0; - goto whereBeginError; - } - pWInfo->nLevel = nTabList; - pWInfo->pParse = pParse; - pWInfo->pTabList = pTabList; - pWInfo->iBreak = sqlite3VdbeMakeLabel(v); - pWInfo->pWC = pWC = (WhereClause *)&((u8 *)pWInfo)[nByteWInfo]; - pWInfo->wctrlFlags = wctrlFlags; - pWInfo->savedNQueryLoop = pParse->nQueryLoop; - pMaskSet = (WhereMaskSet*)&pWC[1]; +#ifdef SQLITE_ASCII +#define IdChar(C) ((sqlite3CtypeMap[(unsigned char)C]&0x46)!=0) +#endif +#ifdef SQLITE_EBCDIC +SQLITE_PRIVATE const char sqlite3IsEbcdicIdChar[] = { +/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF */ + 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 4x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, /* 5x */ + 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, /* 6x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, /* 7x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 0, /* 8x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 0, 1, 0, /* 9x */ + 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 0, /* Ax */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Bx */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Cx */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Dx */ + 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Ex */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, /* Fx */ +}; +#define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) +#endif +SQLITE_PRIVATE int sqlite3IsIdChar(u8 c){ return IdChar(c); } - /* Split the WHERE clause into separate subexpressions where each - ** subexpression is separated by an AND operator. - */ - initMaskSet(pMaskSet); - whereClauseInit(pWC, pParse, pMaskSet); - sqlite3ExprCodeConstants(pParse, pWhere); - whereSplit(pWC, pWhere, TK_AND); /* IMP: R-15842-53296 */ - - /* Special case: a WHERE clause that is constant. Evaluate the - ** expression and either jump over all of the code or fall thru. - */ - if( pWhere && (nTabList==0 || sqlite3ExprIsConstantNotJoin(pWhere)) ){ - sqlite3ExprIfFalse(pParse, pWhere, pWInfo->iBreak, SQLITE_JUMPIFNULL); - pWhere = 0; - } - /* Assign a bit from the bitmask to every term in the FROM clause. - ** - ** When assigning bitmask values to FROM clause cursors, it must be - ** the case that if X is the bitmask for the N-th FROM clause term then - ** the bitmask for all FROM clause terms to the left of the N-th term - ** is (X-1). An expression from the ON clause of a LEFT JOIN can use - ** its Expr.iRightJoinTable value to find the bitmask of the right table - ** of the join. Subtracting one from the right table bitmask gives a - ** bitmask for all tables to the left of the join. Knowing the bitmask - ** for all tables to the left of a left join is important. Ticket #3015. - ** - ** Configure the WhereClause.vmask variable so that bits that correspond - ** to virtual table cursors are set. This is used to selectively disable - ** the OR-to-IN transformation in exprAnalyzeOrTerm(). It is not helpful - ** with virtual tables. - ** - ** Note that bitmasks are created for all pTabList->nSrc tables in - ** pTabList, not just the first nTabList tables. nTabList is normally - ** equal to pTabList->nSrc but might be shortened to 1 if the - ** WHERE_ONETABLE_ONLY flag is set. - */ - assert( pWC->vmask==0 && pMaskSet->n==0 ); - for(i=0; inSrc; i++){ - createMask(pMaskSet, pTabList->a[i].iCursor); -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( ALWAYS(pTabList->a[i].pTab) && IsVirtual(pTabList->a[i].pTab) ){ - pWC->vmask |= ((Bitmask)1 << i); +/* +** Return the length of the token that begins at z[0]. +** Store the token type in *tokenType before returning. +*/ +SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *z, int *tokenType){ + int i, c; + switch( *z ){ + case ' ': case '\t': case '\n': case '\f': case '\r': { + testcase( z[0]==' ' ); + testcase( z[0]=='\t' ); + testcase( z[0]=='\n' ); + testcase( z[0]=='\f' ); + testcase( z[0]=='\r' ); + for(i=1; sqlite3Isspace(z[i]); i++){} + *tokenType = TK_SPACE; + return i; + } + case '-': { + if( z[1]=='-' ){ + for(i=2; (c=z[i])!=0 && c!='\n'; i++){} + *tokenType = TK_SPACE; /* IMP: R-22934-25134 */ + return i; + } + *tokenType = TK_MINUS; + return 1; + } + case '(': { + *tokenType = TK_LP; + return 1; + } + case ')': { + *tokenType = TK_RP; + return 1; + } + case ';': { + *tokenType = TK_SEMI; + return 1; + } + case '+': { + *tokenType = TK_PLUS; + return 1; + } + case '*': { + *tokenType = TK_STAR; + return 1; + } + case '/': { + if( z[1]!='*' || z[2]==0 ){ + *tokenType = TK_SLASH; + return 1; + } + for(i=3, c=z[2]; (c!='*' || z[i]!='/') && (c=z[i])!=0; i++){} + if( c ) i++; + *tokenType = TK_SPACE; /* IMP: R-22934-25134 */ + return i; + } + case '%': { + *tokenType = TK_REM; + return 1; + } + case '=': { + *tokenType = TK_EQ; + return 1 + (z[1]=='='); + } + case '<': { + if( (c=z[1])=='=' ){ + *tokenType = TK_LE; + return 2; + }else if( c=='>' ){ + *tokenType = TK_NE; + return 2; + }else if( c=='<' ){ + *tokenType = TK_LSHIFT; + return 2; + }else{ + *tokenType = TK_LT; + return 1; + } } -#endif - } -#ifndef NDEBUG - { - Bitmask toTheLeft = 0; - for(i=0; inSrc; i++){ - Bitmask m = getMask(pMaskSet, pTabList->a[i].iCursor); - assert( (m-1)==toTheLeft ); - toTheLeft |= m; + case '>': { + if( (c=z[1])=='=' ){ + *tokenType = TK_GE; + return 2; + }else if( c=='>' ){ + *tokenType = TK_RSHIFT; + return 2; + }else{ + *tokenType = TK_GT; + return 1; + } } - } -#endif - - /* Analyze all of the subexpressions. Note that exprAnalyze() might - ** add new virtual terms onto the end of the WHERE clause. We do not - ** want to analyze these virtual terms, so start analyzing at the end - ** and work forward so that the added virtual terms are never processed. - */ - exprAnalyzeAll(pTabList, pWC); - if( db->mallocFailed ){ - goto whereBeginError; - } - - /* Chose the best index to use for each table in the FROM clause. - ** - ** This loop fills in the following fields: - ** - ** pWInfo->a[].pIdx The index to use for this level of the loop. - ** pWInfo->a[].wsFlags WHERE_xxx flags associated with pIdx - ** pWInfo->a[].nEq The number of == and IN constraints - ** pWInfo->a[].iFrom Which term of the FROM clause is being coded - ** pWInfo->a[].iTabCur The VDBE cursor for the database table - ** pWInfo->a[].iIdxCur The VDBE cursor for the index - ** pWInfo->a[].pTerm When wsFlags==WO_OR, the OR-clause term - ** - ** This loop also figures out the nesting order of tables in the FROM - ** clause. - */ - notReady = ~(Bitmask)0; - andFlags = ~0; - WHERETRACE(("*** Optimizer Start ***\n")); - for(i=iFrom=0, pLevel=pWInfo->a; i=0 && bestJ<0; isOptimal--){ - Bitmask mask; /* Mask of tables not yet ready */ - for(j=iFrom, pTabItem=&pTabList->a[j]; jjointype & (JT_LEFT|JT_CROSS))!=0; - if( j!=iFrom && doNotReorder ) break; - m = getMask(pMaskSet, pTabItem->iCursor); - if( (m & notReady)==0 ){ - if( j==iFrom ) iFrom++; - continue; - } - mask = (isOptimal ? m : notReady); - pOrderBy = ((i==0 && ppOrderBy )?*ppOrderBy:0); - if( pTabItem->pIndex==0 ) nUnconstrained++; - - WHERETRACE(("=== trying table %d with isOptimal=%d ===\n", - j, isOptimal)); - assert( pTabItem->pTab ); -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( IsVirtual(pTabItem->pTab) ){ - sqlite3_index_info **pp = &pWInfo->a[j].pIdxInfo; - bestVirtualIndex(pParse, pWC, pTabItem, mask, notReady, pOrderBy, - &sCost, pp); - }else -#endif - { - bestBtreeIndex(pParse, pWC, pTabItem, mask, notReady, pOrderBy, - &sCost); - } - assert( isOptimal || (sCost.used¬Ready)==0 ); - - /* If an INDEXED BY clause is present, then the plan must use that - ** index if it uses any index at all */ - assert( pTabItem->pIndex==0 - || (sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0 - || sCost.plan.u.pIdx==pTabItem->pIndex ); - - if( isOptimal && (sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0 ){ - notIndexed |= m; - } - - /* Conditions under which this table becomes the best so far: - ** - ** (1) The table must not depend on other tables that have not - ** yet run. - ** - ** (2) A full-table-scan plan cannot supercede indexed plan unless - ** the full-table-scan is an "optimal" plan as defined above. - ** - ** (3) All tables have an INDEXED BY clause or this table lacks an - ** INDEXED BY clause or this table uses the specific - ** index specified by its INDEXED BY clause. This rule ensures - ** that a best-so-far is always selected even if an impossible - ** combination of INDEXED BY clauses are given. The error - ** will be detected and relayed back to the application later. - ** The NEVER() comes about because rule (2) above prevents - ** An indexable full-table-scan from reaching rule (3). - ** - ** (4) The plan cost must be lower than prior plans or else the - ** cost must be the same and the number of rows must be lower. - */ - if( (sCost.used¬Ready)==0 /* (1) */ - && (bestJ<0 || (notIndexed&m)!=0 /* (2) */ - || (bestPlan.plan.wsFlags & WHERE_NOT_FULLSCAN)==0 - || (sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0) - && (nUnconstrained==0 || pTabItem->pIndex==0 /* (3) */ - || NEVER((sCost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0)) - && (bestJ<0 || sCost.rCost=0 ); - assert( notReady & getMask(pMaskSet, pTabList->a[bestJ].iCursor) ); - WHERETRACE(("*** Optimizer selects table %d for loop %d" - " with cost=%g and nRow=%g\n", - bestJ, pLevel-pWInfo->a, bestPlan.rCost, bestPlan.plan.nRow)); - if( (bestPlan.plan.wsFlags & WHERE_ORDERBY)!=0 ){ - *ppOrderBy = 0; - } - andFlags &= bestPlan.plan.wsFlags; - pLevel->plan = bestPlan.plan; - testcase( bestPlan.plan.wsFlags & WHERE_INDEXED ); - testcase( bestPlan.plan.wsFlags & WHERE_TEMP_INDEX ); - if( bestPlan.plan.wsFlags & (WHERE_INDEXED|WHERE_TEMP_INDEX) ){ - pLevel->iIdxCur = pParse->nTab++; - }else{ - pLevel->iIdxCur = -1; + case '!': { + if( z[1]!='=' ){ + *tokenType = TK_ILLEGAL; + return 2; + }else{ + *tokenType = TK_NE; + return 2; + } + } + case '|': { + if( z[1]!='|' ){ + *tokenType = TK_BITOR; + return 1; + }else{ + *tokenType = TK_CONCAT; + return 2; + } + } + case ',': { + *tokenType = TK_COMMA; + return 1; } - notReady &= ~getMask(pMaskSet, pTabList->a[bestJ].iCursor); - pLevel->iFrom = (u8)bestJ; - if( bestPlan.plan.nRow>=(double)1 ){ - pParse->nQueryLoop *= bestPlan.plan.nRow; + case '&': { + *tokenType = TK_BITAND; + return 1; } - - /* Check that if the table scanned by this loop iteration had an - ** INDEXED BY clause attached to it, that the named index is being - ** used for the scan. If not, then query compilation has failed. - ** Return an error. - */ - pIdx = pTabList->a[bestJ].pIndex; - if( pIdx ){ - if( (bestPlan.plan.wsFlags & WHERE_INDEXED)==0 ){ - sqlite3ErrorMsg(pParse, "cannot use index: %s", pIdx->zName); - goto whereBeginError; + case '~': { + *tokenType = TK_BITNOT; + return 1; + } + case '`': + case '\'': + case '"': { + int delim = z[0]; + testcase( delim=='`' ); + testcase( delim=='\'' ); + testcase( delim=='"' ); + for(i=1; (c=z[i])!=0; i++){ + if( c==delim ){ + if( z[i+1]==delim ){ + i++; + }else{ + break; + } + } + } + if( c=='\'' ){ + *tokenType = TK_STRING; + return i+1; + }else if( c!=0 ){ + *tokenType = TK_ID; + return i+1; }else{ - /* If an INDEXED BY clause is used, the bestIndex() function is - ** guaranteed to find the index specified in the INDEXED BY clause - ** if it find an index at all. */ - assert( bestPlan.plan.u.pIdx==pIdx ); + *tokenType = TK_ILLEGAL; + return i; } } - } - WHERETRACE(("*** Optimizer Finished ***\n")); - if( pParse->nErr || db->mallocFailed ){ - goto whereBeginError; - } - - /* If the total query only selects a single row, then the ORDER BY - ** clause is irrelevant. - */ - if( (andFlags & WHERE_UNIQUE)!=0 && ppOrderBy ){ - *ppOrderBy = 0; - } - - /* If the caller is an UPDATE or DELETE statement that is requesting - ** to use a one-pass algorithm, determine if this is appropriate. - ** The one-pass algorithm only works if the WHERE clause constraints - ** the statement to update a single row. - */ - assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 ); - if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 && (andFlags & WHERE_UNIQUE)!=0 ){ - pWInfo->okOnePass = 1; - pWInfo->a[0].plan.wsFlags &= ~WHERE_IDX_ONLY; - } - - /* Open all tables in the pTabList and any indices selected for - ** searching those tables. - */ - sqlite3CodeVerifySchema(pParse, -1); /* Insert the cookie verifier Goto */ - notReady = ~(Bitmask)0; - pWInfo->nRowOut = (double)1; - for(i=0, pLevel=pWInfo->a; ia[pLevel->iFrom]; - pTab = pTabItem->pTab; - pLevel->iTabCur = pTabItem->iCursor; - pWInfo->nRowOut *= pLevel->plan.nRow; - iDb = sqlite3SchemaToIndex(db, pTab->pSchema); - if( (pTab->tabFlags & TF_Ephemeral)!=0 || pTab->pSelect ){ - /* Do nothing */ - }else -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){ - const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); - int iCur = pTabItem->iCursor; - sqlite3VdbeAddOp4(v, OP_VOpen, iCur, 0, 0, pVTab, P4_VTAB); - }else + case '.': { +#ifndef SQLITE_OMIT_FLOATING_POINT + if( !sqlite3Isdigit(z[1]) ) #endif - if( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0 - && (wctrlFlags & WHERE_OMIT_OPEN)==0 ){ - int op = pWInfo->okOnePass ? OP_OpenWrite : OP_OpenRead; - sqlite3OpenTable(pParse, pTabItem->iCursor, iDb, pTab, op); - testcase( pTab->nCol==BMS-1 ); - testcase( pTab->nCol==BMS ); - if( !pWInfo->okOnePass && pTab->nColcolUsed; - int n = 0; - for(; b; b=b>>1, n++){} - sqlite3VdbeChangeP4(v, sqlite3VdbeCurrentAddr(v)-1, - SQLITE_INT_TO_PTR(n), P4_INT32); - assert( n<=pTab->nCol ); + { + *tokenType = TK_DOT; + return 1; } - }else{ - sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + /* If the next character is a digit, this is a floating point + ** number that begins with ".". Fall thru into the next case */ } -#ifndef SQLITE_OMIT_AUTOMATIC_INDEX - if( (pLevel->plan.wsFlags & WHERE_TEMP_INDEX)!=0 ){ - constructAutomaticIndex(pParse, pWC, pTabItem, notReady, pLevel); - }else + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': { + testcase( z[0]=='0' ); testcase( z[0]=='1' ); testcase( z[0]=='2' ); + testcase( z[0]=='3' ); testcase( z[0]=='4' ); testcase( z[0]=='5' ); + testcase( z[0]=='6' ); testcase( z[0]=='7' ); testcase( z[0]=='8' ); + testcase( z[0]=='9' ); + *tokenType = TK_INTEGER; +#ifndef SQLITE_OMIT_HEX_INTEGER + if( z[0]=='0' && (z[1]=='x' || z[1]=='X') && sqlite3Isxdigit(z[2]) ){ + for(i=3; sqlite3Isxdigit(z[i]); i++){} + return i; + } #endif - if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){ - Index *pIx = pLevel->plan.u.pIdx; - KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIx); - int iIdxCur = pLevel->iIdxCur; - assert( pIx->pSchema==pTab->pSchema ); - assert( iIdxCur>=0 ); - sqlite3VdbeAddOp4(v, OP_OpenRead, iIdxCur, pIx->tnum, iDb, - (char*)pKey, P4_KEYINFO_HANDOFF); - VdbeComment((v, "%s", pIx->zName)); + for(i=0; sqlite3Isdigit(z[i]); i++){} +#ifndef SQLITE_OMIT_FLOATING_POINT + if( z[i]=='.' ){ + i++; + while( sqlite3Isdigit(z[i]) ){ i++; } + *tokenType = TK_FLOAT; + } + if( (z[i]=='e' || z[i]=='E') && + ( sqlite3Isdigit(z[i+1]) + || ((z[i+1]=='+' || z[i+1]=='-') && sqlite3Isdigit(z[i+2])) + ) + ){ + i += 2; + while( sqlite3Isdigit(z[i]) ){ i++; } + *tokenType = TK_FLOAT; + } +#endif + while( IdChar(z[i]) ){ + *tokenType = TK_ILLEGAL; + i++; + } + return i; } - sqlite3CodeVerifySchema(pParse, iDb); - notReady &= ~getMask(pWC->pMaskSet, pTabItem->iCursor); - } - pWInfo->iTop = sqlite3VdbeCurrentAddr(v); - if( db->mallocFailed ) goto whereBeginError; - - /* Generate the code to do the search. Each iteration of the for - ** loop below generates code for a single nested loop of the VM - ** program. - */ - notReady = ~(Bitmask)0; - for(i=0; ia[i]; - explainOneScan(pParse, pTabList, pLevel, i, pLevel->iFrom, wctrlFlags); - notReady = codeOneLoopStart(pWInfo, i, wctrlFlags, notReady); - pWInfo->iContinue = pLevel->addrCont; - } - -#ifdef SQLITE_TEST /* For testing and debugging use only */ - /* Record in the query plan information about the current table - ** and the index used to access it (if any). If the table itself - ** is not used, its name is just '{}'. If no index is used - ** the index is listed as "{}". If the primary key is used the - ** index name is '*'. - */ - for(i=0; ia[i]; - pTabItem = &pTabList->a[pLevel->iFrom]; - z = pTabItem->zAlias; - if( z==0 ) z = pTabItem->pTab->zName; - n = sqlite3Strlen30(z); - if( n+nQPlan < sizeof(sqlite3_query_plan)-10 ){ - if( pLevel->plan.wsFlags & WHERE_IDX_ONLY ){ - memcpy(&sqlite3_query_plan[nQPlan], "{}", 2); - nQPlan += 2; - }else{ - memcpy(&sqlite3_query_plan[nQPlan], z, n); - nQPlan += n; - } - sqlite3_query_plan[nQPlan++] = ' '; - } - testcase( pLevel->plan.wsFlags & WHERE_ROWID_EQ ); - testcase( pLevel->plan.wsFlags & WHERE_ROWID_RANGE ); - if( pLevel->plan.wsFlags & (WHERE_ROWID_EQ|WHERE_ROWID_RANGE) ){ - memcpy(&sqlite3_query_plan[nQPlan], "* ", 2); - nQPlan += 2; - }else if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){ - n = sqlite3Strlen30(pLevel->plan.u.pIdx->zName); - if( n+nQPlan < sizeof(sqlite3_query_plan)-2 ){ - memcpy(&sqlite3_query_plan[nQPlan], pLevel->plan.u.pIdx->zName, n); - nQPlan += n; - sqlite3_query_plan[nQPlan++] = ' '; + case '[': { + for(i=1, c=z[0]; c!=']' && (c=z[i])!=0; i++){} + *tokenType = c==']' ? TK_ID : TK_ILLEGAL; + return i; + } + case '?': { + *tokenType = TK_VARIABLE; + for(i=1; sqlite3Isdigit(z[i]); i++){} + return i; + } +#ifndef SQLITE_OMIT_TCL_VARIABLE + case '$': +#endif + case '@': /* For compatibility with MS SQL Server */ + case '#': + case ':': { + int n = 0; + testcase( z[0]=='$' ); testcase( z[0]=='@' ); + testcase( z[0]==':' ); testcase( z[0]=='#' ); + *tokenType = TK_VARIABLE; + for(i=1; (c=z[i])!=0; i++){ + if( IdChar(c) ){ + n++; +#ifndef SQLITE_OMIT_TCL_VARIABLE + }else if( c=='(' && n>0 ){ + do{ + i++; + }while( (c=z[i])!=0 && !sqlite3Isspace(c) && c!=')' ); + if( c==')' ){ + i++; + }else{ + *tokenType = TK_ILLEGAL; + } + break; + }else if( c==':' && z[i+1]==':' ){ + i++; +#endif + }else{ + break; + } } - }else{ - memcpy(&sqlite3_query_plan[nQPlan], "{} ", 3); - nQPlan += 3; + if( n==0 ) *tokenType = TK_ILLEGAL; + return i; + } +#ifndef SQLITE_OMIT_BLOB_LITERAL + case 'x': case 'X': { + testcase( z[0]=='x' ); testcase( z[0]=='X' ); + if( z[1]=='\'' ){ + *tokenType = TK_BLOB; + for(i=2; sqlite3Isxdigit(z[i]); i++){} + if( z[i]!='\'' || i%2 ){ + *tokenType = TK_ILLEGAL; + while( z[i] && z[i]!='\'' ){ i++; } + } + if( z[i] ) i++; + return i; + } + /* Otherwise fall through to the next case */ + } +#endif + default: { + if( !IdChar(*z) ){ + break; + } + for(i=1; IdChar(z[i]); i++){} + *tokenType = keywordCode((char*)z, i); + return i; } } - while( nQPlan>0 && sqlite3_query_plan[nQPlan-1]==' ' ){ - sqlite3_query_plan[--nQPlan] = 0; - } - sqlite3_query_plan[nQPlan] = 0; - nQPlan = 0; -#endif /* SQLITE_TEST // Testing and debugging use only */ - - /* Record the continuation address in the WhereInfo structure. Then - ** clean up and return. - */ - return pWInfo; - - /* Jump here if malloc fails */ -whereBeginError: - if( pWInfo ){ - pParse->nQueryLoop = pWInfo->savedNQueryLoop; - whereInfoFree(db, pWInfo); - } - return 0; + *tokenType = TK_ILLEGAL; + return 1; } /* -** Generate the end of the WHERE loop. See comments on -** sqlite3WhereBegin() for additional information. +** Run the parser on the given SQL string. The parser structure is +** passed in. An SQLITE_ status code is returned. If an error occurs +** then an and attempt is made to write an error message into +** memory obtained from sqlite3_malloc() and to make *pzErrMsg point to that +** error message. */ -SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ - Parse *pParse = pWInfo->pParse; - Vdbe *v = pParse->pVdbe; - int i; - WhereLevel *pLevel; - SrcList *pTabList = pWInfo->pTabList; - sqlite3 *db = pParse->db; +SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){ + int nErr = 0; /* Number of errors encountered */ + int i; /* Loop counter */ + void *pEngine; /* The LEMON-generated LALR(1) parser */ + int tokenType; /* type of the next token */ + int lastTokenParsed = -1; /* type of the previous token */ + u8 enableLookaside; /* Saved value of db->lookaside.bEnabled */ + sqlite3 *db = pParse->db; /* The database connection */ + int mxSqlLen; /* Max length of an SQL string */ - /* Generate loop termination code. - */ - sqlite3ExprCacheClear(pParse); - for(i=pWInfo->nLevel-1; i>=0; i--){ - pLevel = &pWInfo->a[i]; - sqlite3VdbeResolveLabel(v, pLevel->addrCont); - if( pLevel->op!=OP_Noop ){ - sqlite3VdbeAddOp2(v, pLevel->op, pLevel->p1, pLevel->p2); - sqlite3VdbeChangeP5(v, pLevel->p5); + + mxSqlLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH]; + if( db->nVdbeActive==0 ){ + db->u1.isInterrupted = 0; + } + pParse->rc = SQLITE_OK; + pParse->zTail = zSql; + i = 0; + assert( pzErrMsg!=0 ); + pEngine = sqlite3ParserAlloc(sqlite3Malloc); + if( pEngine==0 ){ + db->mallocFailed = 1; + return SQLITE_NOMEM; + } + assert( pParse->pNewTable==0 ); + assert( pParse->pNewTrigger==0 ); + assert( pParse->nVar==0 ); + assert( pParse->nzVar==0 ); + assert( pParse->azVar==0 ); + enableLookaside = db->lookaside.bEnabled; + if( db->lookaside.pStart ) db->lookaside.bEnabled = 1; + while( !db->mallocFailed && zSql[i]!=0 ){ + assert( i>=0 ); + pParse->sLastToken.z = &zSql[i]; + pParse->sLastToken.n = sqlite3GetToken((unsigned char*)&zSql[i],&tokenType); + i += pParse->sLastToken.n; + if( i>mxSqlLen ){ + pParse->rc = SQLITE_TOOBIG; + break; } - if( pLevel->plan.wsFlags & WHERE_IN_ABLE && pLevel->u.in.nIn>0 ){ - struct InLoop *pIn; - int j; - sqlite3VdbeResolveLabel(v, pLevel->addrNxt); - for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){ - sqlite3VdbeJumpHere(v, pIn->addrInTop+1); - sqlite3VdbeAddOp2(v, OP_Next, pIn->iCur, pIn->addrInTop); - sqlite3VdbeJumpHere(v, pIn->addrInTop-1); + switch( tokenType ){ + case TK_SPACE: { + if( db->u1.isInterrupted ){ + sqlite3ErrorMsg(pParse, "interrupt"); + pParse->rc = SQLITE_INTERRUPT; + goto abort_parse; + } + break; } - sqlite3DbFree(db, pLevel->u.in.aInLoop); - } - sqlite3VdbeResolveLabel(v, pLevel->addrBrk); - if( pLevel->iLeftJoin ){ - int addr; - addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin); - assert( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0 - || (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ); - if( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0 ){ - sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor); + case TK_ILLEGAL: { + sqlite3DbFree(db, *pzErrMsg); + *pzErrMsg = sqlite3MPrintf(db, "unrecognized token: \"%T\"", + &pParse->sLastToken); + nErr++; + goto abort_parse; } - if( pLevel->iIdxCur>=0 ){ - sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iIdxCur); + case TK_SEMI: { + pParse->zTail = &zSql[i]; + /* Fall thru into the default case */ } - if( pLevel->op==OP_Return ){ - sqlite3VdbeAddOp2(v, OP_Gosub, pLevel->p1, pLevel->addrFirst); - }else{ - sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrFirst); + default: { + sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse); + lastTokenParsed = tokenType; + if( pParse->rc!=SQLITE_OK ){ + goto abort_parse; + } + break; } - sqlite3VdbeJumpHere(v, addr); } } - - /* The "break" point is here, just past the end of the outer loop. - ** Set it. - */ - sqlite3VdbeResolveLabel(v, pWInfo->iBreak); - - /* Close all of the cursors that were opened by sqlite3WhereBegin. - */ - assert( pWInfo->nLevel==1 || pWInfo->nLevel==pTabList->nSrc ); - for(i=0, pLevel=pWInfo->a; inLevel; i++, pLevel++){ - struct SrcList_item *pTabItem = &pTabList->a[pLevel->iFrom]; - Table *pTab = pTabItem->pTab; - assert( pTab!=0 ); - if( (pTab->tabFlags & TF_Ephemeral)==0 - && pTab->pSelect==0 - && (pWInfo->wctrlFlags & WHERE_OMIT_CLOSE)==0 - ){ - int ws = pLevel->plan.wsFlags; - if( !pWInfo->okOnePass && (ws & WHERE_IDX_ONLY)==0 ){ - sqlite3VdbeAddOp1(v, OP_Close, pTabItem->iCursor); - } - if( (ws & WHERE_INDEXED)!=0 && (ws & WHERE_TEMP_INDEX)==0 ){ - sqlite3VdbeAddOp1(v, OP_Close, pLevel->iIdxCur); - } +abort_parse: + if( zSql[i]==0 && nErr==0 && pParse->rc==SQLITE_OK ){ + if( lastTokenParsed!=TK_SEMI ){ + sqlite3Parser(pEngine, TK_SEMI, pParse->sLastToken, pParse); + pParse->zTail = &zSql[i]; } + sqlite3Parser(pEngine, 0, pParse->sLastToken, pParse); + } +#ifdef YYTRACKMAXSTACKDEPTH + sqlite3StatusSet(SQLITE_STATUS_PARSER_STACK, + sqlite3ParserStackPeak(pEngine) + ); +#endif /* YYDEBUG */ + sqlite3ParserFree(pEngine, sqlite3_free); + db->lookaside.bEnabled = enableLookaside; + if( db->mallocFailed ){ + pParse->rc = SQLITE_NOMEM; + } + if( pParse->rc!=SQLITE_OK && pParse->rc!=SQLITE_DONE && pParse->zErrMsg==0 ){ + sqlite3SetString(&pParse->zErrMsg, db, "%s", sqlite3ErrStr(pParse->rc)); + } + assert( pzErrMsg!=0 ); + if( pParse->zErrMsg ){ + *pzErrMsg = pParse->zErrMsg; + sqlite3_log(pParse->rc, "%s", *pzErrMsg); + pParse->zErrMsg = 0; + nErr++; + } + if( pParse->pVdbe && pParse->nErr>0 && pParse->nested==0 ){ + sqlite3VdbeDelete(pParse->pVdbe); + pParse->pVdbe = 0; + } +#ifndef SQLITE_OMIT_SHARED_CACHE + if( pParse->nested==0 ){ + sqlite3DbFree(db, pParse->aTableLock); + pParse->aTableLock = 0; + pParse->nTableLock = 0; + } +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + sqlite3_free(pParse->apVtabLock); +#endif - /* If this scan uses an index, make code substitutions to read data - ** from the index in preference to the table. Sometimes, this means - ** the table need never be read from. This is a performance boost, - ** as the vdbe level waits until the table is read before actually - ** seeking the table cursor to the record corresponding to the current - ** position in the index. - ** - ** Calls to the code generator in between sqlite3WhereBegin and - ** sqlite3WhereEnd will have created code that references the table - ** directly. This loop scans all that code looking for opcodes - ** that reference the table and converts them into opcodes that - ** reference the index. + if( !IN_DECLARE_VTAB ){ + /* If the pParse->declareVtab flag is set, do not delete any table + ** structure built up in pParse->pNewTable. The calling code (see vtab.c) + ** will take responsibility for freeing the Table structure. */ - if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 && !db->mallocFailed){ - int k, j, last; - VdbeOp *pOp; - Index *pIdx = pLevel->plan.u.pIdx; - - assert( pIdx!=0 ); - pOp = sqlite3VdbeGetOp(v, pWInfo->iTop); - last = sqlite3VdbeCurrentAddr(v); - for(k=pWInfo->iTop; kp1!=pLevel->iTabCur ) continue; - if( pOp->opcode==OP_Column ){ - for(j=0; jnColumn; j++){ - if( pOp->p2==pIdx->aiColumn[j] ){ - pOp->p2 = j; - pOp->p1 = pLevel->iIdxCur; - break; - } - } - assert( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0 - || jnColumn ); - }else if( pOp->opcode==OP_Rowid ){ - pOp->p1 = pLevel->iIdxCur; - pOp->opcode = OP_IdxRowid; - } - } - } + sqlite3DeleteTable(db, pParse->pNewTable); } - /* Final cleanup - */ - pParse->nQueryLoop = pWInfo->savedNQueryLoop; - whereInfoFree(db, pWInfo); - return; + if( pParse->bFreeWith ) sqlite3WithDelete(db, pParse->pWith); + sqlite3DeleteTrigger(db, pParse->pNewTrigger); + for(i=pParse->nzVar-1; i>=0; i--) sqlite3DbFree(db, pParse->azVar[i]); + sqlite3DbFree(db, pParse->azVar); + while( pParse->pAinc ){ + AutoincInfo *p = pParse->pAinc; + pParse->pAinc = p->pNext; + sqlite3DbFree(db, p); + } + while( pParse->pZombieTab ){ + Table *p = pParse->pZombieTab; + pParse->pZombieTab = p->pNextZombie; + sqlite3DeleteTable(db, p); + } + if( nErr>0 && pParse->rc==SQLITE_OK ){ + pParse->rc = SQLITE_ERROR; + } + return nErr; } -/************** End of where.c ***********************************************/ -/************** Begin file parse.c *******************************************/ -/* Driver template for the LEMON parser generator. -** The author disclaims copyright to this source code. -** -** This version of "lempar.c" is modified, slightly, for use by SQLite. -** The only modifications are the addition of a couple of NEVER() -** macros to disable tests that are needed in the case of a general -** LALR(1) grammar but which are always false in the -** specific grammar used by SQLite. -*/ -/* First off, code is included that follows the "include" declaration -** in the input grammar file. */ - - +/************** End of tokenize.c ********************************************/ +/************** Begin file complete.c ****************************************/ /* -** Disable all error recovery processing in the parser push-down -** automaton. +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** An tokenizer for SQL +** +** This file contains C code that implements the sqlite3_complete() API. +** This code used to be part of the tokenizer.c source file. But by +** separating it out, the code will be automatically omitted from +** static links that do not use it. */ -#define YYNOERRORRECOVERY 1 +#ifndef SQLITE_OMIT_COMPLETE /* -** Make yytestcase() the same as testcase() +** This is defined in tokenize.c. We just have to import the definition. */ -#define yytestcase(X) testcase(X) +#ifndef SQLITE_AMALGAMATION +#ifdef SQLITE_ASCII +#define IdChar(C) ((sqlite3CtypeMap[(unsigned char)C]&0x46)!=0) +#endif +#ifdef SQLITE_EBCDIC +SQLITE_PRIVATE const char sqlite3IsEbcdicIdChar[]; +#define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) +#endif +#endif /* SQLITE_AMALGAMATION */ -/* -** An instance of this structure holds information about the -** LIMIT clause of a SELECT statement. -*/ -struct LimitVal { - Expr *pLimit; /* The LIMIT expression. NULL if there is no limit */ - Expr *pOffset; /* The OFFSET expression. NULL if there is none */ -}; /* -** An instance of this structure is used to store the LIKE, -** GLOB, NOT LIKE, and NOT GLOB operators. +** Token types used by the sqlite3_complete() routine. See the header +** comments on that procedure for additional information. */ -struct LikeOp { - Token eOperator; /* "like" or "glob" or "regexp" */ - int not; /* True if the NOT keyword is present */ -}; +#define tkSEMI 0 +#define tkWS 1 +#define tkOTHER 2 +#ifndef SQLITE_OMIT_TRIGGER +#define tkEXPLAIN 3 +#define tkCREATE 4 +#define tkTEMP 5 +#define tkTRIGGER 6 +#define tkEND 7 +#endif /* -** An instance of the following structure describes the event of a -** TRIGGER. "a" is the event type, one of TK_UPDATE, TK_INSERT, -** TK_DELETE, or TK_INSTEAD. If the event is of the form +** Return TRUE if the given SQL string ends in a semicolon. ** -** UPDATE ON (a,b,c) +** Special handling is require for CREATE TRIGGER statements. +** Whenever the CREATE TRIGGER keywords are seen, the statement +** must end with ";END;". ** -** Then the "b" IdList records the list "a,b,c". -*/ -struct TrigEvent { int a; IdList * b; }; - -/* -** An instance of this structure holds the ATTACH key and the key type. +** This implementation uses a state machine with 8 states: +** +** (0) INVALID We have not yet seen a non-whitespace character. +** +** (1) START At the beginning or end of an SQL statement. This routine +** returns 1 if it ends in the START state and 0 if it ends +** in any other state. +** +** (2) NORMAL We are in the middle of statement which ends with a single +** semicolon. +** +** (3) EXPLAIN The keyword EXPLAIN has been seen at the beginning of +** a statement. +** +** (4) CREATE The keyword CREATE has been seen at the beginning of a +** statement, possibly preceded by EXPLAIN and/or followed by +** TEMP or TEMPORARY +** +** (5) TRIGGER We are in the middle of a trigger definition that must be +** ended by a semicolon, the keyword END, and another semicolon. +** +** (6) SEMI We've seen the first semicolon in the ";END;" that occurs at +** the end of a trigger definition. +** +** (7) END We've seen the ";END" of the ";END;" that occurs at the end +** of a trigger definition. +** +** Transitions between states above are determined by tokens extracted +** from the input. The following tokens are significant: +** +** (0) tkSEMI A semicolon. +** (1) tkWS Whitespace. +** (2) tkOTHER Any other SQL token. +** (3) tkEXPLAIN The "explain" keyword. +** (4) tkCREATE The "create" keyword. +** (5) tkTEMP The "temp" or "temporary" keyword. +** (6) tkTRIGGER The "trigger" keyword. +** (7) tkEND The "end" keyword. +** +** Whitespace never causes a state transition and is always ignored. +** This means that a SQL string of all whitespace is invalid. +** +** If we compile with SQLITE_OMIT_TRIGGER, all of the computation needed +** to recognize the end of a trigger can be omitted. All we have to do +** is look for a semicolon that is not part of an string or comment. */ -struct AttachKey { int type; Token key; }; - - - /* This is a utility routine used to set the ExprSpan.zStart and - ** ExprSpan.zEnd values of pOut so that the span covers the complete - ** range of text beginning with pStart and going to the end of pEnd. - */ - static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){ - pOut->zStart = pStart->z; - pOut->zEnd = &pEnd->z[pEnd->n]; - } - - /* Construct a new Expr object from a single identifier. Use the - ** new Expr to populate pOut. Set the span of pOut to be the identifier - ** that created the expression. - */ - static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token *pValue){ - pOut->pExpr = sqlite3PExpr(pParse, op, 0, 0, pValue); - pOut->zStart = pValue->z; - pOut->zEnd = &pValue->z[pValue->n]; - } +SQLITE_API int sqlite3_complete(const char *zSql){ + u8 state = 0; /* Current state, using numbers defined in header comment */ + u8 token; /* Value of the next token */ - /* This routine constructs a binary expression node out of two ExprSpan - ** objects and uses the result to populate a new ExprSpan object. +#ifndef SQLITE_OMIT_TRIGGER + /* A complex statement machine used to detect the end of a CREATE TRIGGER + ** statement. This is the normal case. */ - static void spanBinaryExpr( - ExprSpan *pOut, /* Write the result here */ - Parse *pParse, /* The parsing context. Errors accumulate here */ - int op, /* The binary operation */ - ExprSpan *pLeft, /* The left operand */ - ExprSpan *pRight /* The right operand */ - ){ - pOut->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr, 0); - pOut->zStart = pLeft->zStart; - pOut->zEnd = pRight->zEnd; - } - - /* Construct an expression node for a unary postfix operator + static const u8 trans[8][8] = { + /* Token: */ + /* State: ** SEMI WS OTHER EXPLAIN CREATE TEMP TRIGGER END */ + /* 0 INVALID: */ { 1, 0, 2, 3, 4, 2, 2, 2, }, + /* 1 START: */ { 1, 1, 2, 3, 4, 2, 2, 2, }, + /* 2 NORMAL: */ { 1, 2, 2, 2, 2, 2, 2, 2, }, + /* 3 EXPLAIN: */ { 1, 3, 3, 2, 4, 2, 2, 2, }, + /* 4 CREATE: */ { 1, 4, 2, 2, 2, 4, 5, 2, }, + /* 5 TRIGGER: */ { 6, 5, 5, 5, 5, 5, 5, 5, }, + /* 6 SEMI: */ { 6, 6, 5, 5, 5, 5, 5, 7, }, + /* 7 END: */ { 1, 7, 5, 5, 5, 5, 5, 5, }, + }; +#else + /* If triggers are not supported by this compile then the statement machine + ** used to detect the end of a statement is much simpler */ - static void spanUnaryPostfix( - ExprSpan *pOut, /* Write the new expression node here */ - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand */ - Token *pPostOp /* The operand token for setting the span */ - ){ - pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); - pOut->zStart = pOperand->zStart; - pOut->zEnd = &pPostOp->z[pPostOp->n]; - } + static const u8 trans[3][3] = { + /* Token: */ + /* State: ** SEMI WS OTHER */ + /* 0 INVALID: */ { 1, 0, 2, }, + /* 1 START: */ { 1, 1, 2, }, + /* 2 NORMAL: */ { 1, 2, 2, }, + }; +#endif /* SQLITE_OMIT_TRIGGER */ - /* A routine to convert a binary TK_IS or TK_ISNOT expression into a - ** unary TK_ISNULL or TK_NOTNULL expression. */ - static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){ - sqlite3 *db = pParse->db; - if( db->mallocFailed==0 && pY->op==TK_NULL ){ - pA->op = (u8)op; - sqlite3ExprDelete(db, pA->pRight); - pA->pRight = 0; + while( *zSql ){ + switch( *zSql ){ + case ';': { /* A semicolon */ + token = tkSEMI; + break; + } + case ' ': + case '\r': + case '\t': + case '\n': + case '\f': { /* White space is ignored */ + token = tkWS; + break; + } + case '/': { /* C-style comments */ + if( zSql[1]!='*' ){ + token = tkOTHER; + break; + } + zSql += 2; + while( zSql[0] && (zSql[0]!='*' || zSql[1]!='/') ){ zSql++; } + if( zSql[0]==0 ) return 0; + zSql++; + token = tkWS; + break; + } + case '-': { /* SQL-style comments from "--" to end of line */ + if( zSql[1]!='-' ){ + token = tkOTHER; + break; + } + while( *zSql && *zSql!='\n' ){ zSql++; } + if( *zSql==0 ) return state==1; + token = tkWS; + break; + } + case '[': { /* Microsoft-style identifiers in [...] */ + zSql++; + while( *zSql && *zSql!=']' ){ zSql++; } + if( *zSql==0 ) return 0; + token = tkOTHER; + break; + } + case '`': /* Grave-accent quoted symbols used by MySQL */ + case '"': /* single- and double-quoted strings */ + case '\'': { + int c = *zSql; + zSql++; + while( *zSql && *zSql!=c ){ zSql++; } + if( *zSql==0 ) return 0; + token = tkOTHER; + break; + } + default: { +#ifdef SQLITE_EBCDIC + unsigned char c; +#endif + if( IdChar((u8)*zSql) ){ + /* Keywords and unquoted identifiers */ + int nId; + for(nId=1; IdChar(zSql[nId]); nId++){} +#ifdef SQLITE_OMIT_TRIGGER + token = tkOTHER; +#else + switch( *zSql ){ + case 'c': case 'C': { + if( nId==6 && sqlite3StrNICmp(zSql, "create", 6)==0 ){ + token = tkCREATE; + }else{ + token = tkOTHER; + } + break; + } + case 't': case 'T': { + if( nId==7 && sqlite3StrNICmp(zSql, "trigger", 7)==0 ){ + token = tkTRIGGER; + }else if( nId==4 && sqlite3StrNICmp(zSql, "temp", 4)==0 ){ + token = tkTEMP; + }else if( nId==9 && sqlite3StrNICmp(zSql, "temporary", 9)==0 ){ + token = tkTEMP; + }else{ + token = tkOTHER; + } + break; + } + case 'e': case 'E': { + if( nId==3 && sqlite3StrNICmp(zSql, "end", 3)==0 ){ + token = tkEND; + }else +#ifndef SQLITE_OMIT_EXPLAIN + if( nId==7 && sqlite3StrNICmp(zSql, "explain", 7)==0 ){ + token = tkEXPLAIN; + }else +#endif + { + token = tkOTHER; + } + break; + } + default: { + token = tkOTHER; + break; + } + } +#endif /* SQLITE_OMIT_TRIGGER */ + zSql += nId-1; + }else{ + /* Operators and special symbols */ + token = tkOTHER; + } + break; + } } + state = trans[state][token]; + zSql++; } + return state==1; +} - /* Construct an expression node for a unary prefix operator - */ - static void spanUnaryPrefix( - ExprSpan *pOut, /* Write the new expression node here */ - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand */ - Token *pPreOp /* The operand token for setting the span */ - ){ - pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); - pOut->zStart = pPreOp->z; - pOut->zEnd = pOperand->zEnd; - } -/* Next is all token values, in a form suitable for use by makeheaders. -** This section will be null unless lemon is run with the -m switch. -*/ -/* -** These constants (all generated automatically by the parser generator) -** specify the various kinds of tokens (terminals) that the parser -** understands. -** -** Each symbol here is a terminal symbol in the grammar. -*/ -/* Make sure the INTERFACE macro is defined. -*/ -#ifndef INTERFACE -# define INTERFACE 1 -#endif -/* The next thing included is series of defines which control -** various aspects of the generated parser. -** YYCODETYPE is the data type used for storing terminal -** and nonterminal numbers. "unsigned char" is -** used if there are fewer than 250 terminals -** and nonterminals. "int" is used otherwise. -** YYNOCODE is a number of type YYCODETYPE which corresponds -** to no legal terminal or nonterminal number. This -** number is used to fill in empty slots of the hash -** table. -** YYFALLBACK If defined, this indicates that one or more tokens -** have fall-back values which should be used if the -** original value of the token will not parse. -** YYACTIONTYPE is the data type used for storing terminal -** and nonterminal numbers. "unsigned char" is -** used if there are fewer than 250 rules and -** states combined. "int" is used otherwise. -** sqlite3ParserTOKENTYPE is the data type used for minor tokens given -** directly to the parser from the tokenizer. -** YYMINORTYPE is the data type used for all minor tokens. -** This is typically a union of many types, one of -** which is sqlite3ParserTOKENTYPE. The entry in the union -** for base tokens is called "yy0". -** YYSTACKDEPTH is the maximum depth of the parser's stack. If -** zero the stack is dynamically sized using realloc() -** sqlite3ParserARG_SDECL A static variable declaration for the %extra_argument -** sqlite3ParserARG_PDECL A parameter declaration for the %extra_argument -** sqlite3ParserARG_STORE Code to store %extra_argument into yypParser -** sqlite3ParserARG_FETCH Code to extract %extra_argument from yypParser -** YYNSTATE the combined number of states. -** YYNRULE the number of rules in the grammar -** YYERRORSYMBOL is the code number of the error symbol. If not -** defined, then do no error processing. +#ifndef SQLITE_OMIT_UTF16 +/* +** This routine is the same as the sqlite3_complete() routine described +** above, except that the parameter is required to be UTF-16 encoded, not +** UTF-8. */ -#define YYCODETYPE unsigned char -#define YYNOCODE 253 -#define YYACTIONTYPE unsigned short int -#define YYWILDCARD 67 -#define sqlite3ParserTOKENTYPE Token -typedef union { - int yyinit; - sqlite3ParserTOKENTYPE yy0; - int yy4; - struct TrigEvent yy90; - ExprSpan yy118; - TriggerStep* yy203; - u8 yy210; - struct {int value; int mask;} yy215; - SrcList* yy259; - struct LimitVal yy292; - Expr* yy314; - ExprList* yy322; - struct LikeOp yy342; - IdList* yy384; - Select* yy387; -} YYMINORTYPE; -#ifndef YYSTACKDEPTH -#define YYSTACKDEPTH 100 -#endif -#define sqlite3ParserARG_SDECL Parse *pParse; -#define sqlite3ParserARG_PDECL ,Parse *pParse -#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse -#define sqlite3ParserARG_STORE yypParser->pParse = pParse -#define YYNSTATE 630 -#define YYNRULE 329 -#define YYFALLBACK 1 -#define YY_NO_ACTION (YYNSTATE+YYNRULE+2) -#define YY_ACCEPT_ACTION (YYNSTATE+YYNRULE+1) -#define YY_ERROR_ACTION (YYNSTATE+YYNRULE) - -/* The yyzerominor constant is used to initialize instances of -** YYMINORTYPE objects to zero. */ -static const YYMINORTYPE yyzerominor = { 0 }; +SQLITE_API int sqlite3_complete16(const void *zSql){ + sqlite3_value *pVal; + char const *zSql8; + int rc = SQLITE_NOMEM; -/* Define the yytestcase() macro to be a no-op if is not already defined -** otherwise. -** -** Applications can choose to define yytestcase() in the %include section -** to a macro that can assist in verifying code coverage. For production -** code the yytestcase() macro should be turned off. But it is useful -** for testing. -*/ -#ifndef yytestcase -# define yytestcase(X) +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); + if( rc ) return rc; #endif + pVal = sqlite3ValueNew(0); + sqlite3ValueSetStr(pVal, -1, zSql, SQLITE_UTF16NATIVE, SQLITE_STATIC); + zSql8 = sqlite3ValueText(pVal, SQLITE_UTF8); + if( zSql8 ){ + rc = sqlite3_complete(zSql8); + }else{ + rc = SQLITE_NOMEM; + } + sqlite3ValueFree(pVal); + return sqlite3ApiExit(0, rc); +} +#endif /* SQLITE_OMIT_UTF16 */ +#endif /* SQLITE_OMIT_COMPLETE */ - -/* Next are the tables used to determine what action to take based on the -** current state and lookahead token. These tables are used to implement -** functions that take a state number and lookahead value and return an -** action integer. -** -** Suppose the action integer is N. Then the action is determined as -** follows +/************** End of complete.c ********************************************/ +/************** Begin file main.c ********************************************/ +/* +** 2001 September 15 ** -** 0 <= N < YYNSTATE Shift N. That is, push the lookahead -** token onto the stack and goto state N. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** YYNSTATE <= N < YYNSTATE+YYNRULE Reduce by rule N-YYNSTATE. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** N == YYNSTATE+YYNRULE A syntax error has occurred. +************************************************************************* +** Main file for the SQLite library. The routines in this file +** implement the programmer interface to the library. Routines in +** other files are for internal use by SQLite and should not be +** accessed by users of the library. +*/ + +#ifdef SQLITE_ENABLE_FTS3 +/************** Include fts3.h in the middle of main.c ***********************/ +/************** Begin file fts3.h ********************************************/ +/* +** 2006 Oct 10 ** -** N == YYNSTATE+YYNRULE+1 The parser accepts its input. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** N == YYNSTATE+YYNRULE+2 No such action. Denotes unused -** slots in the yy_action[] table. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** The action table is constructed as a single large table named yy_action[]. -** Given state S and lookahead X, the action is computed as +****************************************************************************** ** -** yy_action[ yy_shift_ofst[S] + X ] +** This header file is used by programs that want to link against the +** FTS3 library. All it does is declare the sqlite3Fts3Init() interface. +*/ + +#if 0 +extern "C" { +#endif /* __cplusplus */ + +SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db); + +#if 0 +} /* extern "C" */ +#endif /* __cplusplus */ + +/************** End of fts3.h ************************************************/ +/************** Continuing where we left off in main.c ***********************/ +#endif +#ifdef SQLITE_ENABLE_RTREE +/************** Include rtree.h in the middle of main.c **********************/ +/************** Begin file rtree.h *******************************************/ +/* +** 2008 May 26 ** -** If the index value yy_shift_ofst[S]+X is out of range or if the value -** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X or if yy_shift_ofst[S] -** is equal to YY_SHIFT_USE_DFLT, it means that the action is not in the table -** and that yy_default[S] should be used instead. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** The formula above is for computing the action when the lookahead is -** a terminal symbol. If the lookahead is a non-terminal (as occurs after -** a reduce action) then the yy_reduce_ofst[] array is used in place of -** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of -** YY_SHIFT_USE_DFLT. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** The following are the tables generated in this section: +****************************************************************************** ** -** yy_action[] A single table containing all actions. -** yy_lookahead[] A table containing the lookahead for each entry in -** yy_action. Used to detect hash collisions. -** yy_shift_ofst[] For each state, the offset into yy_action for -** shifting terminals. -** yy_reduce_ofst[] For each state, the offset into yy_action for -** shifting non-terminals after a reduce. -** yy_default[] Default action for each state. +** This header file is used by programs that want to link against the +** RTREE library. All it does is declare the sqlite3RtreeInit() interface. */ -#define YY_ACTTAB_COUNT (1557) -static const YYACTIONTYPE yy_action[] = { - /* 0 */ 313, 960, 186, 419, 2, 172, 627, 597, 55, 55, - /* 10 */ 55, 55, 48, 53, 53, 53, 53, 52, 52, 51, - /* 20 */ 51, 51, 50, 238, 302, 283, 623, 622, 516, 515, - /* 30 */ 590, 584, 55, 55, 55, 55, 282, 53, 53, 53, - /* 40 */ 53, 52, 52, 51, 51, 51, 50, 238, 6, 56, - /* 50 */ 57, 47, 582, 581, 583, 583, 54, 54, 55, 55, - /* 60 */ 55, 55, 608, 53, 53, 53, 53, 52, 52, 51, - /* 70 */ 51, 51, 50, 238, 313, 597, 409, 330, 579, 579, - /* 80 */ 32, 53, 53, 53, 53, 52, 52, 51, 51, 51, - /* 90 */ 50, 238, 330, 217, 620, 619, 166, 411, 624, 382, - /* 100 */ 379, 378, 7, 491, 590, 584, 200, 199, 198, 58, - /* 110 */ 377, 300, 414, 621, 481, 66, 623, 622, 621, 580, - /* 120 */ 254, 601, 94, 56, 57, 47, 582, 581, 583, 583, - /* 130 */ 54, 54, 55, 55, 55, 55, 671, 53, 53, 53, - /* 140 */ 53, 52, 52, 51, 51, 51, 50, 238, 313, 532, - /* 150 */ 226, 506, 507, 133, 177, 139, 284, 385, 279, 384, - /* 160 */ 169, 197, 342, 398, 251, 226, 253, 275, 388, 167, - /* 170 */ 139, 284, 385, 279, 384, 169, 570, 236, 590, 584, - /* 180 */ 672, 240, 275, 157, 620, 619, 554, 437, 51, 51, - /* 190 */ 51, 50, 238, 343, 439, 553, 438, 56, 57, 47, - /* 200 */ 582, 581, 583, 583, 54, 54, 55, 55, 55, 55, - /* 210 */ 465, 53, 53, 53, 53, 52, 52, 51, 51, 51, - /* 220 */ 50, 238, 313, 390, 52, 52, 51, 51, 51, 50, - /* 230 */ 238, 391, 166, 491, 566, 382, 379, 378, 409, 440, - /* 240 */ 579, 579, 252, 440, 607, 66, 377, 513, 621, 49, - /* 250 */ 46, 147, 590, 584, 621, 16, 466, 189, 621, 441, - /* 260 */ 442, 673, 526, 441, 340, 577, 595, 64, 194, 482, - /* 270 */ 434, 56, 57, 47, 582, 581, 583, 583, 54, 54, - /* 280 */ 55, 55, 55, 55, 30, 53, 53, 53, 53, 52, - /* 290 */ 52, 51, 51, 51, 50, 238, 313, 593, 593, 593, - /* 300 */ 387, 578, 606, 493, 259, 351, 258, 411, 1, 623, - /* 310 */ 622, 496, 623, 622, 65, 240, 623, 622, 597, 443, - /* 320 */ 237, 239, 414, 341, 237, 602, 590, 584, 18, 603, - /* 330 */ 166, 601, 87, 382, 379, 378, 67, 623, 622, 38, - /* 340 */ 623, 622, 176, 270, 377, 56, 57, 47, 582, 581, - /* 350 */ 583, 583, 54, 54, 55, 55, 55, 55, 175, 53, - /* 360 */ 53, 53, 53, 52, 52, 51, 51, 51, 50, 238, - /* 370 */ 313, 396, 233, 411, 531, 565, 317, 620, 619, 44, - /* 380 */ 620, 619, 240, 206, 620, 619, 597, 266, 414, 268, - /* 390 */ 409, 597, 579, 579, 352, 184, 505, 601, 73, 533, - /* 400 */ 590, 584, 466, 548, 190, 620, 619, 576, 620, 619, - /* 410 */ 547, 383, 551, 35, 332, 575, 574, 600, 504, 56, - /* 420 */ 57, 47, 582, 581, 583, 583, 54, 54, 55, 55, - /* 430 */ 55, 55, 567, 53, 53, 53, 53, 52, 52, 51, - /* 440 */ 51, 51, 50, 238, 313, 411, 561, 561, 528, 364, - /* 450 */ 259, 351, 258, 183, 361, 549, 524, 374, 411, 597, - /* 460 */ 414, 240, 560, 560, 409, 604, 579, 579, 328, 601, - /* 470 */ 93, 623, 622, 414, 590, 584, 237, 564, 559, 559, - /* 480 */ 520, 402, 601, 87, 409, 210, 579, 579, 168, 421, - /* 490 */ 950, 519, 950, 56, 57, 47, 582, 581, 583, 583, - /* 500 */ 54, 54, 55, 55, 55, 55, 192, 53, 53, 53, - /* 510 */ 53, 52, 52, 51, 51, 51, 50, 238, 313, 600, - /* 520 */ 293, 563, 511, 234, 357, 146, 475, 475, 367, 411, - /* 530 */ 562, 411, 358, 542, 425, 171, 411, 215, 144, 620, - /* 540 */ 619, 544, 318, 353, 414, 203, 414, 275, 590, 584, - /* 550 */ 549, 414, 174, 601, 94, 601, 79, 558, 471, 61, - /* 560 */ 601, 79, 421, 949, 350, 949, 34, 56, 57, 47, - /* 570 */ 582, 581, 583, 583, 54, 54, 55, 55, 55, 55, - /* 580 */ 535, 53, 53, 53, 53, 52, 52, 51, 51, 51, - /* 590 */ 50, 238, 313, 307, 424, 394, 272, 49, 46, 147, - /* 600 */ 349, 322, 4, 411, 491, 312, 321, 425, 568, 492, - /* 610 */ 216, 264, 407, 575, 574, 429, 66, 549, 414, 621, - /* 620 */ 540, 602, 590, 584, 13, 603, 621, 601, 72, 12, - /* 630 */ 618, 617, 616, 202, 210, 621, 546, 469, 422, 319, - /* 640 */ 148, 56, 57, 47, 582, 581, 583, 583, 54, 54, - /* 650 */ 55, 55, 55, 55, 338, 53, 53, 53, 53, 52, - /* 660 */ 52, 51, 51, 51, 50, 238, 313, 600, 600, 411, - /* 670 */ 39, 21, 37, 170, 237, 875, 411, 572, 572, 201, - /* 680 */ 144, 473, 538, 331, 414, 474, 143, 146, 630, 628, - /* 690 */ 334, 414, 353, 601, 68, 168, 590, 584, 132, 365, - /* 700 */ 601, 96, 307, 423, 530, 336, 49, 46, 147, 568, - /* 710 */ 406, 216, 549, 360, 529, 56, 57, 47, 582, 581, - /* 720 */ 583, 583, 54, 54, 55, 55, 55, 55, 411, 53, - /* 730 */ 53, 53, 53, 52, 52, 51, 51, 51, 50, 238, - /* 740 */ 313, 411, 605, 414, 484, 510, 172, 422, 597, 318, - /* 750 */ 496, 485, 601, 99, 411, 142, 414, 411, 231, 411, - /* 760 */ 540, 411, 359, 629, 2, 601, 97, 426, 308, 414, - /* 770 */ 590, 584, 414, 20, 414, 621, 414, 621, 601, 106, - /* 780 */ 503, 601, 105, 601, 108, 601, 109, 204, 28, 56, - /* 790 */ 57, 47, 582, 581, 583, 583, 54, 54, 55, 55, - /* 800 */ 55, 55, 411, 53, 53, 53, 53, 52, 52, 51, - /* 810 */ 51, 51, 50, 238, 313, 411, 597, 414, 411, 276, - /* 820 */ 214, 600, 411, 366, 213, 381, 601, 134, 274, 500, - /* 830 */ 414, 167, 130, 414, 621, 411, 354, 414, 376, 601, - /* 840 */ 135, 129, 601, 100, 590, 584, 601, 104, 522, 521, - /* 850 */ 414, 621, 224, 273, 600, 167, 327, 282, 600, 601, - /* 860 */ 103, 468, 521, 56, 57, 47, 582, 581, 583, 583, - /* 870 */ 54, 54, 55, 55, 55, 55, 411, 53, 53, 53, - /* 880 */ 53, 52, 52, 51, 51, 51, 50, 238, 313, 411, - /* 890 */ 27, 414, 411, 375, 276, 167, 359, 544, 50, 238, - /* 900 */ 601, 95, 128, 223, 414, 411, 165, 414, 411, 621, - /* 910 */ 411, 621, 612, 601, 102, 372, 601, 76, 590, 584, - /* 920 */ 414, 570, 236, 414, 470, 414, 167, 621, 188, 601, - /* 930 */ 98, 225, 601, 138, 601, 137, 232, 56, 45, 47, - /* 940 */ 582, 581, 583, 583, 54, 54, 55, 55, 55, 55, - /* 950 */ 411, 53, 53, 53, 53, 52, 52, 51, 51, 51, - /* 960 */ 50, 238, 313, 276, 276, 414, 411, 276, 544, 459, - /* 970 */ 359, 171, 209, 479, 601, 136, 628, 334, 621, 621, - /* 980 */ 125, 414, 621, 368, 411, 621, 257, 540, 589, 588, - /* 990 */ 601, 75, 590, 584, 458, 446, 23, 23, 124, 414, - /* 1000 */ 326, 325, 621, 427, 324, 309, 600, 288, 601, 92, - /* 1010 */ 586, 585, 57, 47, 582, 581, 583, 583, 54, 54, - /* 1020 */ 55, 55, 55, 55, 411, 53, 53, 53, 53, 52, - /* 1030 */ 52, 51, 51, 51, 50, 238, 313, 587, 411, 414, - /* 1040 */ 411, 207, 611, 476, 171, 472, 160, 123, 601, 91, - /* 1050 */ 323, 261, 15, 414, 464, 414, 411, 621, 411, 354, - /* 1060 */ 222, 411, 601, 74, 601, 90, 590, 584, 159, 264, - /* 1070 */ 158, 414, 461, 414, 621, 600, 414, 121, 120, 25, - /* 1080 */ 601, 89, 601, 101, 621, 601, 88, 47, 582, 581, - /* 1090 */ 583, 583, 54, 54, 55, 55, 55, 55, 544, 53, - /* 1100 */ 53, 53, 53, 52, 52, 51, 51, 51, 50, 238, - /* 1110 */ 43, 405, 263, 3, 610, 264, 140, 415, 622, 24, - /* 1120 */ 410, 11, 456, 594, 118, 155, 219, 452, 408, 621, - /* 1130 */ 621, 621, 156, 43, 405, 621, 3, 286, 621, 113, - /* 1140 */ 415, 622, 111, 445, 411, 400, 557, 403, 545, 10, - /* 1150 */ 411, 408, 264, 110, 205, 436, 541, 566, 453, 414, - /* 1160 */ 621, 621, 63, 621, 435, 414, 411, 621, 601, 94, - /* 1170 */ 403, 621, 411, 337, 601, 86, 150, 40, 41, 534, - /* 1180 */ 566, 414, 242, 264, 42, 413, 412, 414, 600, 595, - /* 1190 */ 601, 85, 191, 333, 107, 451, 601, 84, 621, 539, - /* 1200 */ 40, 41, 420, 230, 411, 149, 316, 42, 413, 412, - /* 1210 */ 398, 127, 595, 315, 621, 399, 278, 625, 181, 414, - /* 1220 */ 593, 593, 593, 592, 591, 14, 450, 411, 601, 71, - /* 1230 */ 240, 621, 43, 405, 264, 3, 615, 180, 264, 415, - /* 1240 */ 622, 614, 414, 593, 593, 593, 592, 591, 14, 621, - /* 1250 */ 408, 601, 70, 621, 417, 33, 405, 613, 3, 411, - /* 1260 */ 264, 411, 415, 622, 418, 626, 178, 509, 8, 403, - /* 1270 */ 241, 416, 126, 408, 414, 621, 414, 449, 208, 566, - /* 1280 */ 240, 221, 621, 601, 83, 601, 82, 599, 297, 277, - /* 1290 */ 296, 30, 403, 31, 395, 264, 295, 397, 489, 40, - /* 1300 */ 41, 411, 566, 220, 621, 294, 42, 413, 412, 271, - /* 1310 */ 621, 595, 600, 621, 59, 60, 414, 269, 267, 623, - /* 1320 */ 622, 36, 40, 41, 621, 601, 81, 598, 235, 42, - /* 1330 */ 413, 412, 621, 621, 595, 265, 344, 411, 248, 556, - /* 1340 */ 173, 185, 593, 593, 593, 592, 591, 14, 218, 29, - /* 1350 */ 621, 543, 414, 305, 304, 303, 179, 301, 411, 566, - /* 1360 */ 454, 601, 80, 289, 335, 593, 593, 593, 592, 591, - /* 1370 */ 14, 411, 287, 414, 151, 392, 246, 260, 411, 196, - /* 1380 */ 195, 523, 601, 69, 411, 245, 414, 526, 537, 285, - /* 1390 */ 389, 595, 621, 414, 536, 601, 17, 362, 153, 414, - /* 1400 */ 466, 463, 601, 78, 154, 414, 462, 152, 601, 77, - /* 1410 */ 355, 255, 621, 455, 601, 9, 621, 386, 444, 517, - /* 1420 */ 247, 621, 593, 593, 593, 621, 621, 244, 621, 243, - /* 1430 */ 430, 518, 292, 621, 329, 621, 145, 393, 280, 513, - /* 1440 */ 291, 131, 621, 514, 621, 621, 311, 621, 259, 346, - /* 1450 */ 249, 621, 621, 229, 314, 621, 228, 512, 227, 240, - /* 1460 */ 494, 488, 310, 164, 487, 486, 373, 480, 163, 262, - /* 1470 */ 369, 371, 162, 26, 212, 478, 477, 161, 141, 363, - /* 1480 */ 467, 122, 339, 187, 119, 348, 347, 117, 116, 115, - /* 1490 */ 114, 112, 182, 457, 320, 22, 433, 432, 448, 19, - /* 1500 */ 609, 431, 428, 62, 193, 596, 573, 298, 555, 552, - /* 1510 */ 571, 404, 290, 380, 498, 510, 495, 306, 281, 499, - /* 1520 */ 250, 5, 497, 460, 345, 447, 569, 550, 238, 299, - /* 1530 */ 527, 525, 508, 961, 502, 501, 961, 401, 961, 211, - /* 1540 */ 490, 356, 256, 961, 483, 961, 961, 961, 961, 961, - /* 1550 */ 961, 961, 961, 961, 961, 961, 370, -}; -static const YYCODETYPE yy_lookahead[] = { - /* 0 */ 19, 142, 143, 144, 145, 24, 1, 26, 77, 78, - /* 10 */ 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, - /* 20 */ 89, 90, 91, 92, 15, 98, 26, 27, 7, 8, - /* 30 */ 49, 50, 77, 78, 79, 80, 109, 82, 83, 84, - /* 40 */ 85, 86, 87, 88, 89, 90, 91, 92, 22, 68, - /* 50 */ 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 60 */ 79, 80, 23, 82, 83, 84, 85, 86, 87, 88, - /* 70 */ 89, 90, 91, 92, 19, 94, 112, 19, 114, 115, - /* 80 */ 25, 82, 83, 84, 85, 86, 87, 88, 89, 90, - /* 90 */ 91, 92, 19, 22, 94, 95, 96, 150, 150, 99, - /* 100 */ 100, 101, 76, 150, 49, 50, 105, 106, 107, 54, - /* 110 */ 110, 158, 165, 165, 161, 162, 26, 27, 165, 113, - /* 120 */ 16, 174, 175, 68, 69, 70, 71, 72, 73, 74, - /* 130 */ 75, 76, 77, 78, 79, 80, 118, 82, 83, 84, - /* 140 */ 85, 86, 87, 88, 89, 90, 91, 92, 19, 23, - /* 150 */ 92, 97, 98, 24, 96, 97, 98, 99, 100, 101, - /* 160 */ 102, 25, 97, 216, 60, 92, 62, 109, 221, 25, - /* 170 */ 97, 98, 99, 100, 101, 102, 86, 87, 49, 50, - /* 180 */ 118, 116, 109, 25, 94, 95, 32, 97, 88, 89, - /* 190 */ 90, 91, 92, 128, 104, 41, 106, 68, 69, 70, - /* 200 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 210 */ 11, 82, 83, 84, 85, 86, 87, 88, 89, 90, - /* 220 */ 91, 92, 19, 19, 86, 87, 88, 89, 90, 91, - /* 230 */ 92, 27, 96, 150, 66, 99, 100, 101, 112, 150, - /* 240 */ 114, 115, 138, 150, 161, 162, 110, 103, 165, 222, - /* 250 */ 223, 224, 49, 50, 165, 22, 57, 24, 165, 170, - /* 260 */ 171, 118, 94, 170, 171, 23, 98, 25, 185, 186, - /* 270 */ 243, 68, 69, 70, 71, 72, 73, 74, 75, 76, - /* 280 */ 77, 78, 79, 80, 126, 82, 83, 84, 85, 86, - /* 290 */ 87, 88, 89, 90, 91, 92, 19, 129, 130, 131, - /* 300 */ 88, 23, 172, 173, 105, 106, 107, 150, 22, 26, - /* 310 */ 27, 181, 26, 27, 22, 116, 26, 27, 26, 230, - /* 320 */ 231, 197, 165, 230, 231, 113, 49, 50, 204, 117, - /* 330 */ 96, 174, 175, 99, 100, 101, 22, 26, 27, 136, - /* 340 */ 26, 27, 118, 16, 110, 68, 69, 70, 71, 72, - /* 350 */ 73, 74, 75, 76, 77, 78, 79, 80, 118, 82, - /* 360 */ 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, - /* 370 */ 19, 214, 215, 150, 23, 23, 155, 94, 95, 22, - /* 380 */ 94, 95, 116, 160, 94, 95, 94, 60, 165, 62, - /* 390 */ 112, 26, 114, 115, 128, 23, 36, 174, 175, 88, - /* 400 */ 49, 50, 57, 120, 22, 94, 95, 23, 94, 95, - /* 410 */ 120, 51, 25, 136, 169, 170, 171, 194, 58, 68, - /* 420 */ 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 430 */ 79, 80, 23, 82, 83, 84, 85, 86, 87, 88, - /* 440 */ 89, 90, 91, 92, 19, 150, 12, 12, 23, 228, - /* 450 */ 105, 106, 107, 23, 233, 25, 165, 19, 150, 94, - /* 460 */ 165, 116, 28, 28, 112, 174, 114, 115, 108, 174, - /* 470 */ 175, 26, 27, 165, 49, 50, 231, 11, 44, 44, - /* 480 */ 46, 46, 174, 175, 112, 160, 114, 115, 50, 22, - /* 490 */ 23, 57, 25, 68, 69, 70, 71, 72, 73, 74, - /* 500 */ 75, 76, 77, 78, 79, 80, 119, 82, 83, 84, - /* 510 */ 85, 86, 87, 88, 89, 90, 91, 92, 19, 194, - /* 520 */ 225, 23, 23, 215, 19, 95, 105, 106, 107, 150, - /* 530 */ 23, 150, 27, 23, 67, 25, 150, 206, 207, 94, - /* 540 */ 95, 166, 104, 218, 165, 22, 165, 109, 49, 50, - /* 550 */ 120, 165, 25, 174, 175, 174, 175, 23, 21, 234, - /* 560 */ 174, 175, 22, 23, 239, 25, 25, 68, 69, 70, - /* 570 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 580 */ 205, 82, 83, 84, 85, 86, 87, 88, 89, 90, - /* 590 */ 91, 92, 19, 22, 23, 216, 23, 222, 223, 224, - /* 600 */ 63, 220, 35, 150, 150, 163, 220, 67, 166, 167, - /* 610 */ 168, 150, 169, 170, 171, 161, 162, 25, 165, 165, - /* 620 */ 150, 113, 49, 50, 25, 117, 165, 174, 175, 35, - /* 630 */ 7, 8, 9, 160, 160, 165, 120, 100, 67, 247, - /* 640 */ 248, 68, 69, 70, 71, 72, 73, 74, 75, 76, - /* 650 */ 77, 78, 79, 80, 193, 82, 83, 84, 85, 86, - /* 660 */ 87, 88, 89, 90, 91, 92, 19, 194, 194, 150, - /* 670 */ 135, 24, 137, 35, 231, 138, 150, 129, 130, 206, - /* 680 */ 207, 30, 27, 213, 165, 34, 118, 95, 0, 1, - /* 690 */ 2, 165, 218, 174, 175, 50, 49, 50, 22, 48, - /* 700 */ 174, 175, 22, 23, 23, 244, 222, 223, 224, 166, - /* 710 */ 167, 168, 120, 239, 23, 68, 69, 70, 71, 72, - /* 720 */ 73, 74, 75, 76, 77, 78, 79, 80, 150, 82, - /* 730 */ 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, - /* 740 */ 19, 150, 173, 165, 181, 182, 24, 67, 26, 104, - /* 750 */ 181, 188, 174, 175, 150, 39, 165, 150, 52, 150, - /* 760 */ 150, 150, 150, 144, 145, 174, 175, 249, 250, 165, - /* 770 */ 49, 50, 165, 52, 165, 165, 165, 165, 174, 175, - /* 780 */ 29, 174, 175, 174, 175, 174, 175, 160, 22, 68, - /* 790 */ 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 800 */ 79, 80, 150, 82, 83, 84, 85, 86, 87, 88, - /* 810 */ 89, 90, 91, 92, 19, 150, 94, 165, 150, 150, - /* 820 */ 160, 194, 150, 213, 160, 52, 174, 175, 23, 23, - /* 830 */ 165, 25, 22, 165, 165, 150, 150, 165, 52, 174, - /* 840 */ 175, 22, 174, 175, 49, 50, 174, 175, 190, 191, - /* 850 */ 165, 165, 240, 23, 194, 25, 187, 109, 194, 174, - /* 860 */ 175, 190, 191, 68, 69, 70, 71, 72, 73, 74, - /* 870 */ 75, 76, 77, 78, 79, 80, 150, 82, 83, 84, - /* 880 */ 85, 86, 87, 88, 89, 90, 91, 92, 19, 150, - /* 890 */ 22, 165, 150, 23, 150, 25, 150, 166, 91, 92, - /* 900 */ 174, 175, 22, 217, 165, 150, 102, 165, 150, 165, - /* 910 */ 150, 165, 150, 174, 175, 19, 174, 175, 49, 50, - /* 920 */ 165, 86, 87, 165, 23, 165, 25, 165, 24, 174, - /* 930 */ 175, 187, 174, 175, 174, 175, 205, 68, 69, 70, - /* 940 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 950 */ 150, 82, 83, 84, 85, 86, 87, 88, 89, 90, - /* 960 */ 91, 92, 19, 150, 150, 165, 150, 150, 166, 23, - /* 970 */ 150, 25, 160, 20, 174, 175, 1, 2, 165, 165, - /* 980 */ 104, 165, 165, 43, 150, 165, 240, 150, 49, 50, - /* 990 */ 174, 175, 49, 50, 23, 23, 25, 25, 53, 165, - /* 1000 */ 187, 187, 165, 23, 187, 25, 194, 205, 174, 175, - /* 1010 */ 71, 72, 69, 70, 71, 72, 73, 74, 75, 76, - /* 1020 */ 77, 78, 79, 80, 150, 82, 83, 84, 85, 86, - /* 1030 */ 87, 88, 89, 90, 91, 92, 19, 98, 150, 165, - /* 1040 */ 150, 160, 150, 59, 25, 53, 104, 22, 174, 175, - /* 1050 */ 213, 138, 5, 165, 1, 165, 150, 165, 150, 150, - /* 1060 */ 240, 150, 174, 175, 174, 175, 49, 50, 118, 150, - /* 1070 */ 35, 165, 27, 165, 165, 194, 165, 108, 127, 76, - /* 1080 */ 174, 175, 174, 175, 165, 174, 175, 70, 71, 72, - /* 1090 */ 73, 74, 75, 76, 77, 78, 79, 80, 166, 82, - /* 1100 */ 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, - /* 1110 */ 19, 20, 193, 22, 150, 150, 150, 26, 27, 76, - /* 1120 */ 150, 22, 1, 150, 119, 121, 217, 20, 37, 165, - /* 1130 */ 165, 165, 16, 19, 20, 165, 22, 205, 165, 119, - /* 1140 */ 26, 27, 108, 128, 150, 150, 150, 56, 150, 22, - /* 1150 */ 150, 37, 150, 127, 160, 23, 150, 66, 193, 165, - /* 1160 */ 165, 165, 16, 165, 23, 165, 150, 165, 174, 175, - /* 1170 */ 56, 165, 150, 65, 174, 175, 15, 86, 87, 88, - /* 1180 */ 66, 165, 140, 150, 93, 94, 95, 165, 194, 98, - /* 1190 */ 174, 175, 22, 3, 164, 193, 174, 175, 165, 150, - /* 1200 */ 86, 87, 4, 180, 150, 248, 251, 93, 94, 95, - /* 1210 */ 216, 180, 98, 251, 165, 221, 150, 149, 6, 165, - /* 1220 */ 129, 130, 131, 132, 133, 134, 193, 150, 174, 175, - /* 1230 */ 116, 165, 19, 20, 150, 22, 149, 151, 150, 26, - /* 1240 */ 27, 149, 165, 129, 130, 131, 132, 133, 134, 165, - /* 1250 */ 37, 174, 175, 165, 149, 19, 20, 13, 22, 150, - /* 1260 */ 150, 150, 26, 27, 146, 147, 151, 150, 25, 56, - /* 1270 */ 152, 159, 154, 37, 165, 165, 165, 193, 160, 66, - /* 1280 */ 116, 193, 165, 174, 175, 174, 175, 194, 199, 150, - /* 1290 */ 200, 126, 56, 124, 123, 150, 201, 122, 150, 86, - /* 1300 */ 87, 150, 66, 193, 165, 202, 93, 94, 95, 150, - /* 1310 */ 165, 98, 194, 165, 125, 22, 165, 150, 150, 26, - /* 1320 */ 27, 135, 86, 87, 165, 174, 175, 203, 226, 93, - /* 1330 */ 94, 95, 165, 165, 98, 150, 218, 150, 193, 157, - /* 1340 */ 118, 157, 129, 130, 131, 132, 133, 134, 5, 104, - /* 1350 */ 165, 211, 165, 10, 11, 12, 13, 14, 150, 66, - /* 1360 */ 17, 174, 175, 210, 246, 129, 130, 131, 132, 133, - /* 1370 */ 134, 150, 210, 165, 31, 121, 33, 150, 150, 86, - /* 1380 */ 87, 176, 174, 175, 150, 42, 165, 94, 211, 210, - /* 1390 */ 150, 98, 165, 165, 211, 174, 175, 150, 55, 165, - /* 1400 */ 57, 150, 174, 175, 61, 165, 150, 64, 174, 175, - /* 1410 */ 150, 150, 165, 150, 174, 175, 165, 104, 150, 184, - /* 1420 */ 150, 165, 129, 130, 131, 165, 165, 150, 165, 150, - /* 1430 */ 150, 176, 150, 165, 47, 165, 150, 150, 176, 103, - /* 1440 */ 150, 22, 165, 178, 165, 165, 179, 165, 105, 106, - /* 1450 */ 107, 165, 165, 229, 111, 165, 92, 176, 229, 116, - /* 1460 */ 184, 176, 179, 156, 176, 176, 18, 157, 156, 237, - /* 1470 */ 45, 157, 156, 135, 157, 157, 238, 156, 68, 157, - /* 1480 */ 189, 189, 139, 219, 22, 157, 18, 192, 192, 192, - /* 1490 */ 192, 189, 219, 199, 157, 242, 40, 157, 199, 242, - /* 1500 */ 153, 157, 38, 245, 196, 166, 232, 198, 177, 177, - /* 1510 */ 232, 227, 209, 178, 166, 182, 166, 148, 177, 177, - /* 1520 */ 209, 196, 177, 199, 209, 199, 166, 208, 92, 195, - /* 1530 */ 174, 174, 183, 252, 183, 183, 252, 191, 252, 235, - /* 1540 */ 186, 241, 241, 252, 186, 252, 252, 252, 252, 252, - /* 1550 */ 252, 252, 252, 252, 252, 252, 236, -}; -#define YY_SHIFT_USE_DFLT (-74) -#define YY_SHIFT_COUNT (418) -#define YY_SHIFT_MIN (-73) -#define YY_SHIFT_MAX (1468) -static const short yy_shift_ofst[] = { - /* 0 */ 975, 1114, 1343, 1114, 1213, 1213, 90, 90, 0, -19, - /* 10 */ 1213, 1213, 1213, 1213, 1213, 345, 445, 721, 1091, 1213, - /* 20 */ 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, - /* 30 */ 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, - /* 40 */ 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1236, 1213, 1213, - /* 50 */ 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, 1213, - /* 60 */ 1213, 199, 445, 445, 835, 835, 365, 1164, 55, 647, - /* 70 */ 573, 499, 425, 351, 277, 203, 129, 795, 795, 795, - /* 80 */ 795, 795, 795, 795, 795, 795, 795, 795, 795, 795, - /* 90 */ 795, 795, 795, 795, 795, 869, 795, 943, 1017, 1017, - /* 100 */ -69, -45, -45, -45, -45, -45, -1, 58, 138, 100, - /* 110 */ 445, 445, 445, 445, 445, 445, 445, 445, 445, 445, - /* 120 */ 445, 445, 445, 445, 445, 445, 537, 438, 445, 445, - /* 130 */ 445, 445, 445, 365, 807, 1436, -74, -74, -74, 1293, - /* 140 */ 73, 434, 434, 311, 314, 290, 283, 286, 540, 467, - /* 150 */ 445, 445, 445, 445, 445, 445, 445, 445, 445, 445, - /* 160 */ 445, 445, 445, 445, 445, 445, 445, 445, 445, 445, - /* 170 */ 445, 445, 445, 445, 445, 445, 445, 445, 445, 445, - /* 180 */ 445, 445, 65, 722, 722, 722, 688, 266, 1164, 1164, - /* 190 */ 1164, -74, -74, -74, 136, 168, 168, 234, 360, 360, - /* 200 */ 360, 430, 372, 435, 352, 278, 126, -36, -36, -36, - /* 210 */ -36, 421, 651, -36, -36, 592, 292, 212, 623, 158, - /* 220 */ 204, 204, 505, 158, 505, 144, 365, 154, 365, 154, - /* 230 */ 645, 154, 204, 154, 154, 535, 548, 548, 365, 387, - /* 240 */ 508, 233, 1464, 1222, 1222, 1456, 1456, 1222, 1462, 1410, - /* 250 */ 1165, 1468, 1468, 1468, 1468, 1222, 1165, 1462, 1410, 1410, - /* 260 */ 1222, 1448, 1338, 1425, 1222, 1222, 1448, 1222, 1448, 1222, - /* 270 */ 1448, 1419, 1313, 1313, 1313, 1387, 1364, 1364, 1419, 1313, - /* 280 */ 1336, 1313, 1387, 1313, 1313, 1254, 1245, 1254, 1245, 1254, - /* 290 */ 1245, 1222, 1222, 1186, 1189, 1175, 1169, 1171, 1165, 1164, - /* 300 */ 1243, 1244, 1244, 1212, 1212, 1212, 1212, -74, -74, -74, - /* 310 */ -74, -74, -74, 939, 104, 680, 571, 327, 1, 980, - /* 320 */ 26, 972, 971, 946, 901, 870, 830, 806, 54, 21, - /* 330 */ -73, 510, 242, 1198, 1190, 1170, 1042, 1161, 1108, 1146, - /* 340 */ 1141, 1132, 1015, 1127, 1026, 1034, 1020, 1107, 1004, 1116, - /* 350 */ 1121, 1005, 1099, 951, 1043, 1003, 969, 1045, 1035, 950, - /* 360 */ 1053, 1047, 1025, 942, 913, 992, 1019, 945, 984, 940, - /* 370 */ 876, 904, 953, 896, 748, 804, 880, 786, 868, 819, - /* 380 */ 805, 810, 773, 751, 766, 706, 716, 691, 681, 568, - /* 390 */ 655, 638, 676, 516, 541, 594, 599, 567, 541, 534, - /* 400 */ 507, 527, 498, 523, 466, 382, 409, 384, 357, 6, - /* 410 */ 240, 224, 143, 62, 18, 71, 39, 9, 5, -}; -#define YY_REDUCE_USE_DFLT (-142) -#define YY_REDUCE_COUNT (312) -#define YY_REDUCE_MIN (-141) -#define YY_REDUCE_MAX (1369) -static const short yy_reduce_ofst[] = { - /* 0 */ -141, 994, 1118, 223, 157, -53, 93, 89, 83, 375, - /* 10 */ 386, 381, 379, 308, 295, 325, -47, 27, 1240, 1234, - /* 20 */ 1228, 1221, 1208, 1187, 1151, 1111, 1109, 1077, 1054, 1022, - /* 30 */ 1016, 1000, 911, 908, 906, 890, 888, 874, 834, 816, - /* 40 */ 800, 760, 758, 755, 742, 739, 726, 685, 672, 668, - /* 50 */ 665, 652, 611, 609, 607, 604, 591, 578, 526, 519, - /* 60 */ 453, 474, 454, 461, 443, 245, 442, 473, 484, 484, - /* 70 */ 484, 484, 484, 484, 484, 484, 484, 484, 484, 484, - /* 80 */ 484, 484, 484, 484, 484, 484, 484, 484, 484, 484, - /* 90 */ 484, 484, 484, 484, 484, 484, 484, 484, 484, 484, - /* 100 */ 484, 484, 484, 484, 484, 484, 484, 130, 484, 484, - /* 110 */ 1145, 909, 1110, 1088, 1084, 1033, 1002, 965, 820, 837, - /* 120 */ 746, 686, 612, 817, 610, 919, 221, 563, 814, 813, - /* 130 */ 744, 669, 470, 543, 484, 484, 484, 484, 484, 291, - /* 140 */ 569, 671, 658, 970, 1290, 1287, 1286, 1282, 518, 518, - /* 150 */ 1280, 1279, 1277, 1270, 1268, 1263, 1261, 1260, 1256, 1251, - /* 160 */ 1247, 1227, 1185, 1168, 1167, 1159, 1148, 1139, 1117, 1066, - /* 170 */ 1049, 1006, 998, 996, 995, 973, 970, 966, 964, 892, - /* 180 */ 762, -52, 881, 932, 802, 731, 619, 812, 664, 660, - /* 190 */ 627, 392, 331, 124, 1358, 1357, 1356, 1354, 1352, 1351, - /* 200 */ 1349, 1319, 1334, 1346, 1334, 1334, 1334, 1334, 1334, 1334, - /* 210 */ 1334, 1320, 1304, 1334, 1334, 1319, 1360, 1325, 1369, 1326, - /* 220 */ 1315, 1311, 1301, 1324, 1300, 1335, 1350, 1345, 1348, 1342, - /* 230 */ 1333, 1341, 1303, 1332, 1331, 1284, 1278, 1274, 1339, 1309, - /* 240 */ 1308, 1347, 1258, 1344, 1340, 1257, 1253, 1337, 1273, 1302, - /* 250 */ 1299, 1298, 1297, 1296, 1295, 1328, 1294, 1264, 1292, 1291, - /* 260 */ 1322, 1321, 1238, 1232, 1318, 1317, 1316, 1314, 1312, 1310, - /* 270 */ 1307, 1283, 1289, 1288, 1285, 1276, 1229, 1224, 1267, 1281, - /* 280 */ 1265, 1262, 1235, 1255, 1205, 1183, 1179, 1177, 1162, 1140, - /* 290 */ 1153, 1184, 1182, 1102, 1124, 1103, 1095, 1090, 1089, 1093, - /* 300 */ 1112, 1115, 1086, 1105, 1092, 1087, 1068, 962, 955, 957, - /* 310 */ 1031, 1023, 1030, -}; -static const YYACTIONTYPE yy_default[] = { - /* 0 */ 635, 870, 959, 959, 959, 870, 899, 899, 959, 759, - /* 10 */ 959, 959, 959, 959, 868, 959, 959, 933, 959, 959, - /* 20 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 30 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 40 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 50 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 60 */ 959, 959, 959, 959, 899, 899, 674, 763, 794, 959, - /* 70 */ 959, 959, 959, 959, 959, 959, 959, 932, 934, 809, - /* 80 */ 808, 802, 801, 912, 774, 799, 792, 785, 796, 871, - /* 90 */ 864, 865, 863, 867, 872, 959, 795, 831, 848, 830, - /* 100 */ 842, 847, 854, 846, 843, 833, 832, 666, 834, 835, - /* 110 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 120 */ 959, 959, 959, 959, 959, 959, 661, 728, 959, 959, - /* 130 */ 959, 959, 959, 959, 836, 837, 851, 850, 849, 959, - /* 140 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 150 */ 959, 939, 937, 959, 883, 959, 959, 959, 959, 959, - /* 160 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 170 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 180 */ 959, 641, 959, 759, 759, 759, 635, 959, 959, 959, - /* 190 */ 959, 951, 763, 753, 719, 959, 959, 959, 959, 959, - /* 200 */ 959, 959, 959, 959, 959, 959, 959, 804, 742, 922, - /* 210 */ 924, 959, 905, 740, 663, 761, 676, 751, 643, 798, - /* 220 */ 776, 776, 917, 798, 917, 700, 959, 788, 959, 788, - /* 230 */ 697, 788, 776, 788, 788, 866, 959, 959, 959, 760, - /* 240 */ 751, 959, 944, 767, 767, 936, 936, 767, 810, 732, - /* 250 */ 798, 739, 739, 739, 739, 767, 798, 810, 732, 732, - /* 260 */ 767, 658, 911, 909, 767, 767, 658, 767, 658, 767, - /* 270 */ 658, 876, 730, 730, 730, 715, 880, 880, 876, 730, - /* 280 */ 700, 730, 715, 730, 730, 780, 775, 780, 775, 780, - /* 290 */ 775, 767, 767, 959, 793, 781, 791, 789, 798, 959, - /* 300 */ 718, 651, 651, 640, 640, 640, 640, 956, 956, 951, - /* 310 */ 702, 702, 684, 959, 959, 959, 959, 959, 959, 959, - /* 320 */ 885, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 330 */ 959, 959, 959, 959, 636, 946, 959, 959, 943, 959, - /* 340 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 350 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 915, - /* 360 */ 959, 959, 959, 959, 959, 959, 908, 907, 959, 959, - /* 370 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 380 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - /* 390 */ 959, 959, 959, 959, 790, 959, 782, 959, 869, 959, - /* 400 */ 959, 959, 959, 959, 959, 959, 959, 959, 959, 745, - /* 410 */ 819, 959, 818, 822, 817, 668, 959, 649, 959, 632, - /* 420 */ 637, 955, 958, 957, 954, 953, 952, 947, 945, 942, - /* 430 */ 941, 940, 938, 935, 931, 889, 887, 894, 893, 892, - /* 440 */ 891, 890, 888, 886, 884, 805, 803, 800, 797, 930, - /* 450 */ 882, 741, 738, 737, 657, 948, 914, 923, 921, 811, - /* 460 */ 920, 919, 918, 916, 913, 900, 807, 806, 733, 874, - /* 470 */ 873, 660, 904, 903, 902, 906, 910, 901, 769, 659, - /* 480 */ 656, 665, 722, 721, 729, 727, 726, 725, 724, 723, - /* 490 */ 720, 667, 675, 686, 714, 699, 698, 879, 881, 878, - /* 500 */ 877, 707, 706, 712, 711, 710, 709, 708, 705, 704, - /* 510 */ 703, 696, 695, 701, 694, 717, 716, 713, 693, 736, - /* 520 */ 735, 734, 731, 692, 691, 690, 822, 689, 688, 828, - /* 530 */ 827, 815, 858, 756, 755, 754, 766, 765, 778, 777, - /* 540 */ 813, 812, 779, 764, 758, 757, 773, 772, 771, 770, - /* 550 */ 762, 752, 784, 787, 786, 783, 860, 768, 857, 929, - /* 560 */ 928, 927, 926, 925, 862, 861, 829, 826, 679, 680, - /* 570 */ 898, 896, 897, 895, 682, 681, 678, 677, 859, 747, - /* 580 */ 746, 855, 852, 844, 840, 856, 853, 845, 841, 839, - /* 590 */ 838, 824, 823, 821, 820, 816, 825, 670, 748, 744, - /* 600 */ 743, 814, 750, 749, 687, 685, 683, 664, 662, 655, - /* 610 */ 653, 652, 654, 650, 648, 647, 646, 645, 644, 673, - /* 620 */ 672, 671, 669, 668, 642, 639, 638, 634, 633, 631, -}; -/* The next table maps tokens into fallback tokens. If a construct -** like the following: -** -** %fallback ID X Y Z. -** -** appears in the grammar, then ID becomes a fallback token for X, Y, -** and Z. Whenever one of the tokens X, Y, or Z is input to the parser -** but it does not parse, the type of the token is changed to ID and -** the parse is retried before an error is thrown. -*/ -#ifdef YYFALLBACK -static const YYCODETYPE yyFallback[] = { - 0, /* $ => nothing */ - 0, /* SEMI => nothing */ - 26, /* EXPLAIN => ID */ - 26, /* QUERY => ID */ - 26, /* PLAN => ID */ - 26, /* BEGIN => ID */ - 0, /* TRANSACTION => nothing */ - 26, /* DEFERRED => ID */ - 26, /* IMMEDIATE => ID */ - 26, /* EXCLUSIVE => ID */ - 0, /* COMMIT => nothing */ - 26, /* END => ID */ - 26, /* ROLLBACK => ID */ - 26, /* SAVEPOINT => ID */ - 26, /* RELEASE => ID */ - 0, /* TO => nothing */ - 0, /* TABLE => nothing */ - 0, /* CREATE => nothing */ - 26, /* IF => ID */ - 0, /* NOT => nothing */ - 0, /* EXISTS => nothing */ - 26, /* TEMP => ID */ - 0, /* LP => nothing */ - 0, /* RP => nothing */ - 0, /* AS => nothing */ - 0, /* COMMA => nothing */ - 0, /* ID => nothing */ - 0, /* INDEXED => nothing */ - 26, /* ABORT => ID */ - 26, /* ACTION => ID */ - 26, /* AFTER => ID */ - 26, /* ANALYZE => ID */ - 26, /* ASC => ID */ - 26, /* ATTACH => ID */ - 26, /* BEFORE => ID */ - 26, /* BY => ID */ - 26, /* CASCADE => ID */ - 26, /* CAST => ID */ - 26, /* COLUMNKW => ID */ - 26, /* CONFLICT => ID */ - 26, /* DATABASE => ID */ - 26, /* DESC => ID */ - 26, /* DETACH => ID */ - 26, /* EACH => ID */ - 26, /* FAIL => ID */ - 26, /* FOR => ID */ - 26, /* IGNORE => ID */ - 26, /* INITIALLY => ID */ - 26, /* INSTEAD => ID */ - 26, /* LIKE_KW => ID */ - 26, /* MATCH => ID */ - 26, /* NO => ID */ - 26, /* KEY => ID */ - 26, /* OF => ID */ - 26, /* OFFSET => ID */ - 26, /* PRAGMA => ID */ - 26, /* RAISE => ID */ - 26, /* REPLACE => ID */ - 26, /* RESTRICT => ID */ - 26, /* ROW => ID */ - 26, /* TRIGGER => ID */ - 26, /* VACUUM => ID */ - 26, /* VIEW => ID */ - 26, /* VIRTUAL => ID */ - 26, /* REINDEX => ID */ - 26, /* RENAME => ID */ - 26, /* CTIME_KW => ID */ -}; -#endif /* YYFALLBACK */ +#if 0 +extern "C" { +#endif /* __cplusplus */ -/* The following structure represents a single element of the -** parser's stack. Information stored includes: +SQLITE_PRIVATE int sqlite3RtreeInit(sqlite3 *db); + +#if 0 +} /* extern "C" */ +#endif /* __cplusplus */ + +/************** End of rtree.h ***********************************************/ +/************** Continuing where we left off in main.c ***********************/ +#endif +#ifdef SQLITE_ENABLE_ICU +/************** Include sqliteicu.h in the middle of main.c ******************/ +/************** Begin file sqliteicu.h ***************************************/ +/* +** 2008 May 26 ** -** + The state number for the parser at this level of the stack. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** + The value of the token stored at this level of the stack. -** (In other words, the "major" token.) +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** + The semantic value stored at this level of the stack. This is -** the information used by the action routines in the grammar. -** It is sometimes called the "minor" token. +****************************************************************************** +** +** This header file is used by programs that want to link against the +** ICU extension. All it does is declare the sqlite3IcuInit() interface. */ -struct yyStackEntry { - YYACTIONTYPE stateno; /* The state-number */ - YYCODETYPE major; /* The major token value. This is the code - ** number for the token at this stack level */ - YYMINORTYPE minor; /* The user-supplied minor token value. This - ** is the value of the token */ -}; -typedef struct yyStackEntry yyStackEntry; -/* The state of the parser is completely contained in an instance of -** the following structure */ -struct yyParser { - int yyidx; /* Index of top element in stack */ -#ifdef YYTRACKMAXSTACKDEPTH - int yyidxMax; /* Maximum value of yyidx */ +#if 0 +extern "C" { +#endif /* __cplusplus */ + +SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db); + +#if 0 +} /* extern "C" */ +#endif /* __cplusplus */ + + +/************** End of sqliteicu.h *******************************************/ +/************** Continuing where we left off in main.c ***********************/ #endif - int yyerrcnt; /* Shifts left before out of the error */ - sqlite3ParserARG_SDECL /* A place to hold %extra_argument */ -#if YYSTACKDEPTH<=0 - int yystksz; /* Current side of the stack */ - yyStackEntry *yystack; /* The parser's stack */ -#else - yyStackEntry yystack[YYSTACKDEPTH]; /* The parser's stack */ + +#ifndef SQLITE_AMALGAMATION +/* IMPLEMENTATION-OF: R-46656-45156 The sqlite3_version[] string constant +** contains the text of SQLITE_VERSION macro. +*/ +SQLITE_API const char sqlite3_version[] = SQLITE_VERSION; #endif -}; -typedef struct yyParser yyParser; -#ifndef NDEBUG -static FILE *yyTraceFILE = 0; -static char *yyTracePrompt = 0; -#endif /* NDEBUG */ +/* IMPLEMENTATION-OF: R-53536-42575 The sqlite3_libversion() function returns +** a pointer to the to the sqlite3_version[] string constant. +*/ +SQLITE_API const char *sqlite3_libversion(void){ return sqlite3_version; } -#ifndef NDEBUG -/* -** Turn parser tracing on by giving a stream to which to write the trace -** and a prompt to preface each trace message. Tracing is turned off -** by making either argument NULL -** -** Inputs: -**
    -**
  • A FILE* to which trace output should be written. -** If NULL, then tracing is turned off. -**
  • A prefix string written at the beginning of every -** line of trace output. If NULL, then tracing is -** turned off. -**
-** -** Outputs: -** None. +/* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a +** pointer to a string constant whose value is the same as the +** SQLITE_SOURCE_ID C preprocessor macro. */ -SQLITE_PRIVATE void sqlite3ParserTrace(FILE *TraceFILE, char *zTracePrompt){ - yyTraceFILE = TraceFILE; - yyTracePrompt = zTracePrompt; - if( yyTraceFILE==0 ) yyTracePrompt = 0; - else if( yyTracePrompt==0 ) yyTraceFILE = 0; -} -#endif /* NDEBUG */ +SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } -#ifndef NDEBUG -/* For tracing shifts, the names of all terminals and nonterminals -** are required. The following table supplies these names */ -static const char *const yyTokenName[] = { - "$", "SEMI", "EXPLAIN", "QUERY", - "PLAN", "BEGIN", "TRANSACTION", "DEFERRED", - "IMMEDIATE", "EXCLUSIVE", "COMMIT", "END", - "ROLLBACK", "SAVEPOINT", "RELEASE", "TO", - "TABLE", "CREATE", "IF", "NOT", - "EXISTS", "TEMP", "LP", "RP", - "AS", "COMMA", "ID", "INDEXED", - "ABORT", "ACTION", "AFTER", "ANALYZE", - "ASC", "ATTACH", "BEFORE", "BY", - "CASCADE", "CAST", "COLUMNKW", "CONFLICT", - "DATABASE", "DESC", "DETACH", "EACH", - "FAIL", "FOR", "IGNORE", "INITIALLY", - "INSTEAD", "LIKE_KW", "MATCH", "NO", - "KEY", "OF", "OFFSET", "PRAGMA", - "RAISE", "REPLACE", "RESTRICT", "ROW", - "TRIGGER", "VACUUM", "VIEW", "VIRTUAL", - "REINDEX", "RENAME", "CTIME_KW", "ANY", - "OR", "AND", "IS", "BETWEEN", - "IN", "ISNULL", "NOTNULL", "NE", - "EQ", "GT", "LE", "LT", - "GE", "ESCAPE", "BITAND", "BITOR", - "LSHIFT", "RSHIFT", "PLUS", "MINUS", - "STAR", "SLASH", "REM", "CONCAT", - "COLLATE", "BITNOT", "STRING", "JOIN_KW", - "CONSTRAINT", "DEFAULT", "NULL", "PRIMARY", - "UNIQUE", "CHECK", "REFERENCES", "AUTOINCR", - "ON", "INSERT", "DELETE", "UPDATE", - "SET", "DEFERRABLE", "FOREIGN", "DROP", - "UNION", "ALL", "EXCEPT", "INTERSECT", - "SELECT", "DISTINCT", "DOT", "FROM", - "JOIN", "USING", "ORDER", "GROUP", - "HAVING", "LIMIT", "WHERE", "INTO", - "VALUES", "INTEGER", "FLOAT", "BLOB", - "REGISTER", "VARIABLE", "CASE", "WHEN", - "THEN", "ELSE", "INDEX", "ALTER", - "ADD", "error", "input", "cmdlist", - "ecmd", "explain", "cmdx", "cmd", - "transtype", "trans_opt", "nm", "savepoint_opt", - "create_table", "create_table_args", "createkw", "temp", - "ifnotexists", "dbnm", "columnlist", "conslist_opt", - "select", "column", "columnid", "type", - "carglist", "id", "ids", "typetoken", - "typename", "signed", "plus_num", "minus_num", - "carg", "ccons", "term", "expr", - "onconf", "sortorder", "autoinc", "idxlist_opt", - "refargs", "defer_subclause", "refarg", "refact", - "init_deferred_pred_opt", "conslist", "tcons", "idxlist", - "defer_subclause_opt", "orconf", "resolvetype", "raisetype", - "ifexists", "fullname", "oneselect", "multiselect_op", - "distinct", "selcollist", "from", "where_opt", - "groupby_opt", "having_opt", "orderby_opt", "limit_opt", - "sclp", "as", "seltablist", "stl_prefix", - "joinop", "indexed_opt", "on_opt", "using_opt", - "joinop2", "inscollist", "sortlist", "sortitem", - "nexprlist", "setlist", "insert_cmd", "inscollist_opt", - "itemlist", "exprlist", "likeop", "between_op", - "in_op", "case_operand", "case_exprlist", "case_else", - "uniqueflag", "collate", "nmnum", "plus_opt", - "number", "trigger_decl", "trigger_cmd_list", "trigger_time", - "trigger_event", "foreach_clause", "when_clause", "trigger_cmd", - "trnm", "tridxby", "database_kw_opt", "key_opt", - "add_column_fullname", "kwcolumn_opt", "create_vtab", "vtabarglist", - "vtabarg", "vtabargtoken", "lp", "anylist", -}; -#endif /* NDEBUG */ +/* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function +** returns an integer equal to SQLITE_VERSION_NUMBER. +*/ +SQLITE_API int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; } -#ifndef NDEBUG -/* For tracing reduce actions, the names of all rules are required. +/* IMPLEMENTATION-OF: R-20790-14025 The sqlite3_threadsafe() function returns +** zero if and only if SQLite was compiled with mutexing code omitted due to +** the SQLITE_THREADSAFE compile-time option being set to 0. */ -static const char *const yyRuleName[] = { - /* 0 */ "input ::= cmdlist", - /* 1 */ "cmdlist ::= cmdlist ecmd", - /* 2 */ "cmdlist ::= ecmd", - /* 3 */ "ecmd ::= SEMI", - /* 4 */ "ecmd ::= explain cmdx SEMI", - /* 5 */ "explain ::=", - /* 6 */ "explain ::= EXPLAIN", - /* 7 */ "explain ::= EXPLAIN QUERY PLAN", - /* 8 */ "cmdx ::= cmd", - /* 9 */ "cmd ::= BEGIN transtype trans_opt", - /* 10 */ "trans_opt ::=", - /* 11 */ "trans_opt ::= TRANSACTION", - /* 12 */ "trans_opt ::= TRANSACTION nm", - /* 13 */ "transtype ::=", - /* 14 */ "transtype ::= DEFERRED", - /* 15 */ "transtype ::= IMMEDIATE", - /* 16 */ "transtype ::= EXCLUSIVE", - /* 17 */ "cmd ::= COMMIT trans_opt", - /* 18 */ "cmd ::= END trans_opt", - /* 19 */ "cmd ::= ROLLBACK trans_opt", - /* 20 */ "savepoint_opt ::= SAVEPOINT", - /* 21 */ "savepoint_opt ::=", - /* 22 */ "cmd ::= SAVEPOINT nm", - /* 23 */ "cmd ::= RELEASE savepoint_opt nm", - /* 24 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm", - /* 25 */ "cmd ::= create_table create_table_args", - /* 26 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm", - /* 27 */ "createkw ::= CREATE", - /* 28 */ "ifnotexists ::=", - /* 29 */ "ifnotexists ::= IF NOT EXISTS", - /* 30 */ "temp ::= TEMP", - /* 31 */ "temp ::=", - /* 32 */ "create_table_args ::= LP columnlist conslist_opt RP", - /* 33 */ "create_table_args ::= AS select", - /* 34 */ "columnlist ::= columnlist COMMA column", - /* 35 */ "columnlist ::= column", - /* 36 */ "column ::= columnid type carglist", - /* 37 */ "columnid ::= nm", - /* 38 */ "id ::= ID", - /* 39 */ "id ::= INDEXED", - /* 40 */ "ids ::= ID|STRING", - /* 41 */ "nm ::= id", - /* 42 */ "nm ::= STRING", - /* 43 */ "nm ::= JOIN_KW", - /* 44 */ "type ::=", - /* 45 */ "type ::= typetoken", - /* 46 */ "typetoken ::= typename", - /* 47 */ "typetoken ::= typename LP signed RP", - /* 48 */ "typetoken ::= typename LP signed COMMA signed RP", - /* 49 */ "typename ::= ids", - /* 50 */ "typename ::= typename ids", - /* 51 */ "signed ::= plus_num", - /* 52 */ "signed ::= minus_num", - /* 53 */ "carglist ::= carglist carg", - /* 54 */ "carglist ::=", - /* 55 */ "carg ::= CONSTRAINT nm ccons", - /* 56 */ "carg ::= ccons", - /* 57 */ "ccons ::= DEFAULT term", - /* 58 */ "ccons ::= DEFAULT LP expr RP", - /* 59 */ "ccons ::= DEFAULT PLUS term", - /* 60 */ "ccons ::= DEFAULT MINUS term", - /* 61 */ "ccons ::= DEFAULT id", - /* 62 */ "ccons ::= NULL onconf", - /* 63 */ "ccons ::= NOT NULL onconf", - /* 64 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc", - /* 65 */ "ccons ::= UNIQUE onconf", - /* 66 */ "ccons ::= CHECK LP expr RP", - /* 67 */ "ccons ::= REFERENCES nm idxlist_opt refargs", - /* 68 */ "ccons ::= defer_subclause", - /* 69 */ "ccons ::= COLLATE ids", - /* 70 */ "autoinc ::=", - /* 71 */ "autoinc ::= AUTOINCR", - /* 72 */ "refargs ::=", - /* 73 */ "refargs ::= refargs refarg", - /* 74 */ "refarg ::= MATCH nm", - /* 75 */ "refarg ::= ON INSERT refact", - /* 76 */ "refarg ::= ON DELETE refact", - /* 77 */ "refarg ::= ON UPDATE refact", - /* 78 */ "refact ::= SET NULL", - /* 79 */ "refact ::= SET DEFAULT", - /* 80 */ "refact ::= CASCADE", - /* 81 */ "refact ::= RESTRICT", - /* 82 */ "refact ::= NO ACTION", - /* 83 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt", - /* 84 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt", - /* 85 */ "init_deferred_pred_opt ::=", - /* 86 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED", - /* 87 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE", - /* 88 */ "conslist_opt ::=", - /* 89 */ "conslist_opt ::= COMMA conslist", - /* 90 */ "conslist ::= conslist COMMA tcons", - /* 91 */ "conslist ::= conslist tcons", - /* 92 */ "conslist ::= tcons", - /* 93 */ "tcons ::= CONSTRAINT nm", - /* 94 */ "tcons ::= PRIMARY KEY LP idxlist autoinc RP onconf", - /* 95 */ "tcons ::= UNIQUE LP idxlist RP onconf", - /* 96 */ "tcons ::= CHECK LP expr RP onconf", - /* 97 */ "tcons ::= FOREIGN KEY LP idxlist RP REFERENCES nm idxlist_opt refargs defer_subclause_opt", - /* 98 */ "defer_subclause_opt ::=", - /* 99 */ "defer_subclause_opt ::= defer_subclause", - /* 100 */ "onconf ::=", - /* 101 */ "onconf ::= ON CONFLICT resolvetype", - /* 102 */ "orconf ::=", - /* 103 */ "orconf ::= OR resolvetype", - /* 104 */ "resolvetype ::= raisetype", - /* 105 */ "resolvetype ::= IGNORE", - /* 106 */ "resolvetype ::= REPLACE", - /* 107 */ "cmd ::= DROP TABLE ifexists fullname", - /* 108 */ "ifexists ::= IF EXISTS", - /* 109 */ "ifexists ::=", - /* 110 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm AS select", - /* 111 */ "cmd ::= DROP VIEW ifexists fullname", - /* 112 */ "cmd ::= select", - /* 113 */ "select ::= oneselect", - /* 114 */ "select ::= select multiselect_op oneselect", - /* 115 */ "multiselect_op ::= UNION", - /* 116 */ "multiselect_op ::= UNION ALL", - /* 117 */ "multiselect_op ::= EXCEPT|INTERSECT", - /* 118 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", - /* 119 */ "distinct ::= DISTINCT", - /* 120 */ "distinct ::= ALL", - /* 121 */ "distinct ::=", - /* 122 */ "sclp ::= selcollist COMMA", - /* 123 */ "sclp ::=", - /* 124 */ "selcollist ::= sclp expr as", - /* 125 */ "selcollist ::= sclp STAR", - /* 126 */ "selcollist ::= sclp nm DOT STAR", - /* 127 */ "as ::= AS nm", - /* 128 */ "as ::= ids", - /* 129 */ "as ::=", - /* 130 */ "from ::=", - /* 131 */ "from ::= FROM seltablist", - /* 132 */ "stl_prefix ::= seltablist joinop", - /* 133 */ "stl_prefix ::=", - /* 134 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", - /* 135 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", - /* 136 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", - /* 137 */ "dbnm ::=", - /* 138 */ "dbnm ::= DOT nm", - /* 139 */ "fullname ::= nm dbnm", - /* 140 */ "joinop ::= COMMA|JOIN", - /* 141 */ "joinop ::= JOIN_KW JOIN", - /* 142 */ "joinop ::= JOIN_KW nm JOIN", - /* 143 */ "joinop ::= JOIN_KW nm nm JOIN", - /* 144 */ "on_opt ::= ON expr", - /* 145 */ "on_opt ::=", - /* 146 */ "indexed_opt ::=", - /* 147 */ "indexed_opt ::= INDEXED BY nm", - /* 148 */ "indexed_opt ::= NOT INDEXED", - /* 149 */ "using_opt ::= USING LP inscollist RP", - /* 150 */ "using_opt ::=", - /* 151 */ "orderby_opt ::=", - /* 152 */ "orderby_opt ::= ORDER BY sortlist", - /* 153 */ "sortlist ::= sortlist COMMA sortitem sortorder", - /* 154 */ "sortlist ::= sortitem sortorder", - /* 155 */ "sortitem ::= expr", - /* 156 */ "sortorder ::= ASC", - /* 157 */ "sortorder ::= DESC", - /* 158 */ "sortorder ::=", - /* 159 */ "groupby_opt ::=", - /* 160 */ "groupby_opt ::= GROUP BY nexprlist", - /* 161 */ "having_opt ::=", - /* 162 */ "having_opt ::= HAVING expr", - /* 163 */ "limit_opt ::=", - /* 164 */ "limit_opt ::= LIMIT expr", - /* 165 */ "limit_opt ::= LIMIT expr OFFSET expr", - /* 166 */ "limit_opt ::= LIMIT expr COMMA expr", - /* 167 */ "cmd ::= DELETE FROM fullname indexed_opt where_opt", - /* 168 */ "where_opt ::=", - /* 169 */ "where_opt ::= WHERE expr", - /* 170 */ "cmd ::= UPDATE orconf fullname indexed_opt SET setlist where_opt", - /* 171 */ "setlist ::= setlist COMMA nm EQ expr", - /* 172 */ "setlist ::= nm EQ expr", - /* 173 */ "cmd ::= insert_cmd INTO fullname inscollist_opt VALUES LP itemlist RP", - /* 174 */ "cmd ::= insert_cmd INTO fullname inscollist_opt select", - /* 175 */ "cmd ::= insert_cmd INTO fullname inscollist_opt DEFAULT VALUES", - /* 176 */ "insert_cmd ::= INSERT orconf", - /* 177 */ "insert_cmd ::= REPLACE", - /* 178 */ "itemlist ::= itemlist COMMA expr", - /* 179 */ "itemlist ::= expr", - /* 180 */ "inscollist_opt ::=", - /* 181 */ "inscollist_opt ::= LP inscollist RP", - /* 182 */ "inscollist ::= inscollist COMMA nm", - /* 183 */ "inscollist ::= nm", - /* 184 */ "expr ::= term", - /* 185 */ "expr ::= LP expr RP", - /* 186 */ "term ::= NULL", - /* 187 */ "expr ::= id", - /* 188 */ "expr ::= JOIN_KW", - /* 189 */ "expr ::= nm DOT nm", - /* 190 */ "expr ::= nm DOT nm DOT nm", - /* 191 */ "term ::= INTEGER|FLOAT|BLOB", - /* 192 */ "term ::= STRING", - /* 193 */ "expr ::= REGISTER", - /* 194 */ "expr ::= VARIABLE", - /* 195 */ "expr ::= expr COLLATE ids", - /* 196 */ "expr ::= CAST LP expr AS typetoken RP", - /* 197 */ "expr ::= ID LP distinct exprlist RP", - /* 198 */ "expr ::= ID LP STAR RP", - /* 199 */ "term ::= CTIME_KW", - /* 200 */ "expr ::= expr AND expr", - /* 201 */ "expr ::= expr OR expr", - /* 202 */ "expr ::= expr LT|GT|GE|LE expr", - /* 203 */ "expr ::= expr EQ|NE expr", - /* 204 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", - /* 205 */ "expr ::= expr PLUS|MINUS expr", - /* 206 */ "expr ::= expr STAR|SLASH|REM expr", - /* 207 */ "expr ::= expr CONCAT expr", - /* 208 */ "likeop ::= LIKE_KW", - /* 209 */ "likeop ::= NOT LIKE_KW", - /* 210 */ "likeop ::= MATCH", - /* 211 */ "likeop ::= NOT MATCH", - /* 212 */ "expr ::= expr likeop expr", - /* 213 */ "expr ::= expr likeop expr ESCAPE expr", - /* 214 */ "expr ::= expr ISNULL|NOTNULL", - /* 215 */ "expr ::= expr NOT NULL", - /* 216 */ "expr ::= expr IS expr", - /* 217 */ "expr ::= expr IS NOT expr", - /* 218 */ "expr ::= NOT expr", - /* 219 */ "expr ::= BITNOT expr", - /* 220 */ "expr ::= MINUS expr", - /* 221 */ "expr ::= PLUS expr", - /* 222 */ "between_op ::= BETWEEN", - /* 223 */ "between_op ::= NOT BETWEEN", - /* 224 */ "expr ::= expr between_op expr AND expr", - /* 225 */ "in_op ::= IN", - /* 226 */ "in_op ::= NOT IN", - /* 227 */ "expr ::= expr in_op LP exprlist RP", - /* 228 */ "expr ::= LP select RP", - /* 229 */ "expr ::= expr in_op LP select RP", - /* 230 */ "expr ::= expr in_op nm dbnm", - /* 231 */ "expr ::= EXISTS LP select RP", - /* 232 */ "expr ::= CASE case_operand case_exprlist case_else END", - /* 233 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", - /* 234 */ "case_exprlist ::= WHEN expr THEN expr", - /* 235 */ "case_else ::= ELSE expr", - /* 236 */ "case_else ::=", - /* 237 */ "case_operand ::= expr", - /* 238 */ "case_operand ::=", - /* 239 */ "exprlist ::= nexprlist", - /* 240 */ "exprlist ::=", - /* 241 */ "nexprlist ::= nexprlist COMMA expr", - /* 242 */ "nexprlist ::= expr", - /* 243 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP idxlist RP", - /* 244 */ "uniqueflag ::= UNIQUE", - /* 245 */ "uniqueflag ::=", - /* 246 */ "idxlist_opt ::=", - /* 247 */ "idxlist_opt ::= LP idxlist RP", - /* 248 */ "idxlist ::= idxlist COMMA nm collate sortorder", - /* 249 */ "idxlist ::= nm collate sortorder", - /* 250 */ "collate ::=", - /* 251 */ "collate ::= COLLATE ids", - /* 252 */ "cmd ::= DROP INDEX ifexists fullname", - /* 253 */ "cmd ::= VACUUM", - /* 254 */ "cmd ::= VACUUM nm", - /* 255 */ "cmd ::= PRAGMA nm dbnm", - /* 256 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", - /* 257 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", - /* 258 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", - /* 259 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", - /* 260 */ "nmnum ::= plus_num", - /* 261 */ "nmnum ::= nm", - /* 262 */ "nmnum ::= ON", - /* 263 */ "nmnum ::= DELETE", - /* 264 */ "nmnum ::= DEFAULT", - /* 265 */ "plus_num ::= plus_opt number", - /* 266 */ "minus_num ::= MINUS number", - /* 267 */ "number ::= INTEGER|FLOAT", - /* 268 */ "plus_opt ::= PLUS", - /* 269 */ "plus_opt ::=", - /* 270 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", - /* 271 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", - /* 272 */ "trigger_time ::= BEFORE", - /* 273 */ "trigger_time ::= AFTER", - /* 274 */ "trigger_time ::= INSTEAD OF", - /* 275 */ "trigger_time ::=", - /* 276 */ "trigger_event ::= DELETE|INSERT", - /* 277 */ "trigger_event ::= UPDATE", - /* 278 */ "trigger_event ::= UPDATE OF inscollist", - /* 279 */ "foreach_clause ::=", - /* 280 */ "foreach_clause ::= FOR EACH ROW", - /* 281 */ "when_clause ::=", - /* 282 */ "when_clause ::= WHEN expr", - /* 283 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", - /* 284 */ "trigger_cmd_list ::= trigger_cmd SEMI", - /* 285 */ "trnm ::= nm", - /* 286 */ "trnm ::= nm DOT nm", - /* 287 */ "tridxby ::=", - /* 288 */ "tridxby ::= INDEXED BY nm", - /* 289 */ "tridxby ::= NOT INDEXED", - /* 290 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt", - /* 291 */ "trigger_cmd ::= insert_cmd INTO trnm inscollist_opt VALUES LP itemlist RP", - /* 292 */ "trigger_cmd ::= insert_cmd INTO trnm inscollist_opt select", - /* 293 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt", - /* 294 */ "trigger_cmd ::= select", - /* 295 */ "expr ::= RAISE LP IGNORE RP", - /* 296 */ "expr ::= RAISE LP raisetype COMMA nm RP", - /* 297 */ "raisetype ::= ROLLBACK", - /* 298 */ "raisetype ::= ABORT", - /* 299 */ "raisetype ::= FAIL", - /* 300 */ "cmd ::= DROP TRIGGER ifexists fullname", - /* 301 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", - /* 302 */ "cmd ::= DETACH database_kw_opt expr", - /* 303 */ "key_opt ::=", - /* 304 */ "key_opt ::= KEY expr", - /* 305 */ "database_kw_opt ::= DATABASE", - /* 306 */ "database_kw_opt ::=", - /* 307 */ "cmd ::= REINDEX", - /* 308 */ "cmd ::= REINDEX nm dbnm", - /* 309 */ "cmd ::= ANALYZE", - /* 310 */ "cmd ::= ANALYZE nm dbnm", - /* 311 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", - /* 312 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column", - /* 313 */ "add_column_fullname ::= fullname", - /* 314 */ "kwcolumn_opt ::=", - /* 315 */ "kwcolumn_opt ::= COLUMNKW", - /* 316 */ "cmd ::= create_vtab", - /* 317 */ "cmd ::= create_vtab LP vtabarglist RP", - /* 318 */ "create_vtab ::= createkw VIRTUAL TABLE nm dbnm USING nm", - /* 319 */ "vtabarglist ::= vtabarg", - /* 320 */ "vtabarglist ::= vtabarglist COMMA vtabarg", - /* 321 */ "vtabarg ::=", - /* 322 */ "vtabarg ::= vtabarg vtabargtoken", - /* 323 */ "vtabargtoken ::= ANY", - /* 324 */ "vtabargtoken ::= lp anylist RP", - /* 325 */ "lp ::= LP", - /* 326 */ "anylist ::=", - /* 327 */ "anylist ::= anylist LP anylist RP", - /* 328 */ "anylist ::= anylist ANY", -}; -#endif /* NDEBUG */ +SQLITE_API int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; } +#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE) +/* +** If the following function pointer is not NULL and if +** SQLITE_ENABLE_IOTRACE is enabled, then messages describing +** I/O active are written using this function. These messages +** are intended for debugging activity only. +*/ +SQLITE_PRIVATE void (*sqlite3IoTrace)(const char*, ...) = 0; +#endif -#if YYSTACKDEPTH<=0 /* -** Try to increase the size of the parser stack. +** If the following global variable points to a string which is the +** name of a directory, then that directory will be used to store +** temporary files. +** +** See also the "PRAGMA temp_store_directory" SQL command. */ -static void yyGrowStack(yyParser *p){ - int newSize; - yyStackEntry *pNew; +SQLITE_API char *sqlite3_temp_directory = 0; - newSize = p->yystksz*2 + 100; - pNew = realloc(p->yystack, newSize*sizeof(pNew[0])); - if( pNew ){ - p->yystack = pNew; - p->yystksz = newSize; -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sStack grows to %d entries!\n", - yyTracePrompt, p->yystksz); - } -#endif - } -} -#endif +/* +** If the following global variable points to a string which is the +** name of a directory, then that directory will be used to store +** all database files specified with a relative pathname. +** +** See also the "PRAGMA data_store_directory" SQL command. +*/ +SQLITE_API char *sqlite3_data_directory = 0; -/* -** This function allocates a new parser. -** The only argument is a pointer to a function which works like -** malloc. +/* +** Initialize SQLite. ** -** Inputs: -** A pointer to the function used to allocate memory. +** This routine must be called to initialize the memory allocation, +** VFS, and mutex subsystems prior to doing any serious work with +** SQLite. But as long as you do not compile with SQLITE_OMIT_AUTOINIT +** this routine will be called automatically by key routines such as +** sqlite3_open(). ** -** Outputs: -** A pointer to a parser. This pointer is used in subsequent calls -** to sqlite3Parser and sqlite3ParserFree. +** This routine is a no-op except on its very first call for the process, +** or for the first call after a call to sqlite3_shutdown. +** +** The first thread to call this routine runs the initialization to +** completion. If subsequent threads call this routine before the first +** thread has finished the initialization process, then the subsequent +** threads must block until the first thread finishes with the initialization. +** +** The first thread might call this routine recursively. Recursive +** calls to this routine should not block, of course. Otherwise the +** initialization process would never complete. +** +** Let X be the first thread to enter this routine. Let Y be some other +** thread. Then while the initial invocation of this routine by X is +** incomplete, it is required that: +** +** * Calls to this routine from Y must block until the outer-most +** call by X completes. +** +** * Recursive calls to this routine from thread X return immediately +** without blocking. */ -SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(size_t)){ - yyParser *pParser; - pParser = (yyParser*)(*mallocProc)( (size_t)sizeof(yyParser) ); - if( pParser ){ - pParser->yyidx = -1; -#ifdef YYTRACKMAXSTACKDEPTH - pParser->yyidxMax = 0; +SQLITE_API int sqlite3_initialize(void){ + MUTEX_LOGIC( sqlite3_mutex *pMaster; ) /* The main static mutex */ + int rc; /* Result code */ +#ifdef SQLITE_EXTRA_INIT + int bRunExtraInit = 0; /* Extra initialization needed */ #endif -#if YYSTACKDEPTH<=0 - pParser->yystack = NULL; - pParser->yystksz = 0; - yyGrowStack(pParser); + +#ifdef SQLITE_OMIT_WSD + rc = sqlite3_wsd_init(4096, 24); + if( rc!=SQLITE_OK ){ + return rc; + } #endif + + /* If SQLite is already completely initialized, then this call + ** to sqlite3_initialize() should be a no-op. But the initialization + ** must be complete. So isInit must not be set until the very end + ** of this routine. + */ + if( sqlite3GlobalConfig.isInit ) return SQLITE_OK; + + /* Make sure the mutex subsystem is initialized. If unable to + ** initialize the mutex subsystem, return early with the error. + ** If the system is so sick that we are unable to allocate a mutex, + ** there is not much SQLite is going to be able to do. + ** + ** The mutex subsystem must take care of serializing its own + ** initialization. + */ + rc = sqlite3MutexInit(); + if( rc ) return rc; + + /* Initialize the malloc() system and the recursive pInitMutex mutex. + ** This operation is protected by the STATIC_MASTER mutex. Note that + ** MutexAlloc() is called for a static mutex prior to initializing the + ** malloc subsystem - this implies that the allocation of a static + ** mutex must not require support from the malloc subsystem. + */ + MUTEX_LOGIC( pMaster = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); ) + sqlite3_mutex_enter(pMaster); + sqlite3GlobalConfig.isMutexInit = 1; + if( !sqlite3GlobalConfig.isMallocInit ){ + rc = sqlite3MallocInit(); } - return pParser; -} + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.isMallocInit = 1; + if( !sqlite3GlobalConfig.pInitMutex ){ + sqlite3GlobalConfig.pInitMutex = + sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); + if( sqlite3GlobalConfig.bCoreMutex && !sqlite3GlobalConfig.pInitMutex ){ + rc = SQLITE_NOMEM; + } + } + } + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.nRefInitMutex++; + } + sqlite3_mutex_leave(pMaster); -/* The following function deletes the value associated with a -** symbol. The symbol can be either a terminal or nonterminal. -** "yymajor" is the symbol code, and "yypminor" is a pointer to -** the value. -*/ -static void yy_destructor( - yyParser *yypParser, /* The parser */ - YYCODETYPE yymajor, /* Type code for object to destroy */ - YYMINORTYPE *yypminor /* The object to be destroyed */ -){ - sqlite3ParserARG_FETCH; - switch( yymajor ){ - /* Here is inserted the actions which take place when a - ** terminal or non-terminal is destroyed. This can happen - ** when the symbol is popped from the stack during a - ** reduce or during error processing or when a parser is - ** being destroyed before it is finished parsing. - ** - ** Note: during a reduce, the only symbols destroyed are those - ** which appear on the RHS of the rule, but which are not used - ** inside the C code. - */ - case 160: /* select */ - case 194: /* oneselect */ -{ -sqlite3SelectDelete(pParse->db, (yypminor->yy387)); -} - break; - case 174: /* term */ - case 175: /* expr */ -{ -sqlite3ExprDelete(pParse->db, (yypminor->yy118).pExpr); -} - break; - case 179: /* idxlist_opt */ - case 187: /* idxlist */ - case 197: /* selcollist */ - case 200: /* groupby_opt */ - case 202: /* orderby_opt */ - case 204: /* sclp */ - case 214: /* sortlist */ - case 216: /* nexprlist */ - case 217: /* setlist */ - case 220: /* itemlist */ - case 221: /* exprlist */ - case 226: /* case_exprlist */ -{ -sqlite3ExprListDelete(pParse->db, (yypminor->yy322)); -} - break; - case 193: /* fullname */ - case 198: /* from */ - case 206: /* seltablist */ - case 207: /* stl_prefix */ -{ -sqlite3SrcListDelete(pParse->db, (yypminor->yy259)); -} - break; - case 199: /* where_opt */ - case 201: /* having_opt */ - case 210: /* on_opt */ - case 215: /* sortitem */ - case 225: /* case_operand */ - case 227: /* case_else */ - case 238: /* when_clause */ - case 243: /* key_opt */ -{ -sqlite3ExprDelete(pParse->db, (yypminor->yy314)); -} - break; - case 211: /* using_opt */ - case 213: /* inscollist */ - case 219: /* inscollist_opt */ -{ -sqlite3IdListDelete(pParse->db, (yypminor->yy384)); -} - break; - case 234: /* trigger_cmd_list */ - case 239: /* trigger_cmd */ -{ -sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy203)); -} - break; - case 236: /* trigger_event */ -{ -sqlite3IdListDelete(pParse->db, (yypminor->yy90).b); -} - break; - default: break; /* If no destructor action specified: do nothing */ + /* If rc is not SQLITE_OK at this point, then either the malloc + ** subsystem could not be initialized or the system failed to allocate + ** the pInitMutex mutex. Return an error in either case. */ + if( rc!=SQLITE_OK ){ + return rc; } -} -/* -** Pop the parser's stack once. -** -** If there is a destructor routine associated with the token which -** is popped from the stack, then call it. -** -** Return the major token number for the symbol popped. -*/ -static int yy_pop_parser_stack(yyParser *pParser){ - YYCODETYPE yymajor; - yyStackEntry *yytos = &pParser->yystack[pParser->yyidx]; + /* Do the rest of the initialization under the recursive mutex so + ** that we will be able to handle recursive calls into + ** sqlite3_initialize(). The recursive calls normally come through + ** sqlite3_os_init() when it invokes sqlite3_vfs_register(), but other + ** recursive calls might also be possible. + ** + ** IMPLEMENTATION-OF: R-00140-37445 SQLite automatically serializes calls + ** to the xInit method, so the xInit method need not be threadsafe. + ** + ** The following mutex is what serializes access to the appdef pcache xInit + ** methods. The sqlite3_pcache_methods.xInit() all is embedded in the + ** call to sqlite3PcacheInitialize(). + */ + sqlite3_mutex_enter(sqlite3GlobalConfig.pInitMutex); + if( sqlite3GlobalConfig.isInit==0 && sqlite3GlobalConfig.inProgress==0 ){ + FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); + sqlite3GlobalConfig.inProgress = 1; + memset(pHash, 0, sizeof(sqlite3GlobalFunctions)); + sqlite3RegisterGlobalFunctions(); + if( sqlite3GlobalConfig.isPCacheInit==0 ){ + rc = sqlite3PcacheInitialize(); + } + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.isPCacheInit = 1; + rc = sqlite3OsInit(); + } + if( rc==SQLITE_OK ){ + sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage, + sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage); + sqlite3GlobalConfig.isInit = 1; +#ifdef SQLITE_EXTRA_INIT + bRunExtraInit = 1; +#endif + } + sqlite3GlobalConfig.inProgress = 0; + } + sqlite3_mutex_leave(sqlite3GlobalConfig.pInitMutex); - /* There is no mechanism by which the parser stack can be popped below - ** empty in SQLite. */ - if( NEVER(pParser->yyidx<0) ) return 0; + /* Go back under the static mutex and clean up the recursive + ** mutex to prevent a resource leak. + */ + sqlite3_mutex_enter(pMaster); + sqlite3GlobalConfig.nRefInitMutex--; + if( sqlite3GlobalConfig.nRefInitMutex<=0 ){ + assert( sqlite3GlobalConfig.nRefInitMutex==0 ); + sqlite3_mutex_free(sqlite3GlobalConfig.pInitMutex); + sqlite3GlobalConfig.pInitMutex = 0; + } + sqlite3_mutex_leave(pMaster); + + /* The following is just a sanity check to make sure SQLite has + ** been compiled correctly. It is important to run this code, but + ** we don't want to run it too often and soak up CPU cycles for no + ** reason. So we run it once during initialization. + */ #ifndef NDEBUG - if( yyTraceFILE && pParser->yyidx>=0 ){ - fprintf(yyTraceFILE,"%sPopping %s\n", - yyTracePrompt, - yyTokenName[yytos->major]); +#ifndef SQLITE_OMIT_FLOATING_POINT + /* This section of code's only "output" is via assert() statements. */ + if ( rc==SQLITE_OK ){ + u64 x = (((u64)1)<<63)-1; + double y; + assert(sizeof(x)==8); + assert(sizeof(x)==sizeof(y)); + memcpy(&y, &x, 8); + assert( sqlite3IsNaN(y) ); } #endif - yymajor = yytos->major; - yy_destructor(pParser, yymajor, &yytos->minor); - pParser->yyidx--; - return yymajor; -} +#endif -/* -** Deallocate and destroy a parser. Destructors are all called for -** all stack elements before shutting the parser down. -** -** Inputs: -**
    -**
  • A pointer to the parser. This should be a pointer -** obtained from sqlite3ParserAlloc. -**
  • A pointer to a function used to reclaim memory obtained -** from malloc. -**
-*/ -SQLITE_PRIVATE void sqlite3ParserFree( - void *p, /* The parser to be deleted */ - void (*freeProc)(void*) /* Function used to reclaim memory */ -){ - yyParser *pParser = (yyParser*)p; - /* In SQLite, we never try to destroy a parser that was not successfully - ** created in the first place. */ - if( NEVER(pParser==0) ) return; - while( pParser->yyidx>=0 ) yy_pop_parser_stack(pParser); -#if YYSTACKDEPTH<=0 - free(pParser->yystack); + /* Do extra initialization steps requested by the SQLITE_EXTRA_INIT + ** compile-time option. + */ +#ifdef SQLITE_EXTRA_INIT + if( bRunExtraInit ){ + int SQLITE_EXTRA_INIT(const char*); + rc = SQLITE_EXTRA_INIT(0); + } #endif - (*freeProc)((void*)pParser); -} -/* -** Return the peak depth of the stack for a parser. -*/ -#ifdef YYTRACKMAXSTACKDEPTH -SQLITE_PRIVATE int sqlite3ParserStackPeak(void *p){ - yyParser *pParser = (yyParser*)p; - return pParser->yyidxMax; + return rc; } -#endif /* -** Find the appropriate action for a parser given the terminal -** look-ahead token iLookAhead. -** -** If the look-ahead token is YYNOCODE, then check to see if the action is -** independent of the look-ahead. If it is, return the action, otherwise -** return YY_NO_ACTION. +** Undo the effects of sqlite3_initialize(). Must not be called while +** there are outstanding database connections or memory allocations or +** while any part of SQLite is otherwise in use in any thread. This +** routine is not threadsafe. But it is safe to invoke this routine +** on when SQLite is already shut down. If SQLite is already shut down +** when this routine is invoked, then this routine is a harmless no-op. */ -static int yy_find_shift_action( - yyParser *pParser, /* The parser */ - YYCODETYPE iLookAhead /* The look-ahead token */ -){ - int i; - int stateno = pParser->yystack[pParser->yyidx].stateno; - - if( stateno>YY_SHIFT_COUNT - || (i = yy_shift_ofst[stateno])==YY_SHIFT_USE_DFLT ){ - return yy_default[stateno]; - } - assert( iLookAhead!=YYNOCODE ); - i += iLookAhead; - if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ - if( iLookAhead>0 ){ -#ifdef YYFALLBACK - YYCODETYPE iFallback; /* Fallback token */ - if( iLookAhead %s\n", - yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]); - } -#endif - return yy_find_shift_action(pParser, iFallback); - } -#endif -#ifdef YYWILDCARD - { - int j = i - iLookAhead + YYWILDCARD; - if( -#if YY_SHIFT_MIN+YYWILDCARD<0 - j>=0 && -#endif -#if YY_SHIFT_MAX+YYWILDCARD>=YY_ACTTAB_COUNT - j %s\n", - yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[YYWILDCARD]); - } -#endif /* NDEBUG */ - return yy_action[j]; - } - } -#endif /* YYWILDCARD */ - } - return yy_default[stateno]; - }else{ - return yy_action[i]; + sqlite3_os_end(); + sqlite3_reset_auto_extension(); + sqlite3GlobalConfig.isInit = 0; } -} - -/* -** Find the appropriate action for a parser given the non-terminal -** look-ahead token iLookAhead. -** -** If the look-ahead token is YYNOCODE, then check to see if the action is -** independent of the look-ahead. If it is, return the action, otherwise -** return YY_NO_ACTION. -*/ -static int yy_find_reduce_action( - int stateno, /* Current state number */ - YYCODETYPE iLookAhead /* The look-ahead token */ -){ - int i; -#ifdef YYERRORSYMBOL - if( stateno>YY_REDUCE_COUNT ){ - return yy_default[stateno]; + if( sqlite3GlobalConfig.isPCacheInit ){ + sqlite3PcacheShutdown(); + sqlite3GlobalConfig.isPCacheInit = 0; } -#else - assert( stateno<=YY_REDUCE_COUNT ); + if( sqlite3GlobalConfig.isMallocInit ){ + sqlite3MallocEnd(); + sqlite3GlobalConfig.isMallocInit = 0; + +#ifndef SQLITE_OMIT_SHUTDOWN_DIRECTORIES + /* The heap subsystem has now been shutdown and these values are supposed + ** to be NULL or point to memory that was obtained from sqlite3_malloc(), + ** which would rely on that heap subsystem; therefore, make sure these + ** values cannot refer to heap memory that was just invalidated when the + ** heap subsystem was shutdown. This is only done if the current call to + ** this function resulted in the heap subsystem actually being shutdown. + */ + sqlite3_data_directory = 0; + sqlite3_temp_directory = 0; #endif - i = yy_reduce_ofst[stateno]; - assert( i!=YY_REDUCE_USE_DFLT ); - assert( iLookAhead!=YYNOCODE ); - i += iLookAhead; -#ifdef YYERRORSYMBOL - if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ - return yy_default[stateno]; } -#else - assert( i>=0 && iyyidx--; -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt); - } -#endif - while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser); - /* Here code is inserted which will execute if the parser - ** stack every overflows */ +SQLITE_API int sqlite3_config(int op, ...){ + va_list ap; + int rc = SQLITE_OK; - UNUSED_PARAMETER(yypMinor); /* Silence some compiler warnings */ - sqlite3ErrorMsg(pParse, "parser stack overflow"); - pParse->parseError = 1; - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ -} + /* sqlite3_config() shall return SQLITE_MISUSE if it is invoked while + ** the SQLite library is in use. */ + if( sqlite3GlobalConfig.isInit ) return SQLITE_MISUSE_BKPT; -/* -** Perform a shift action. -*/ -static void yy_shift( - yyParser *yypParser, /* The parser to be shifted */ - int yyNewState, /* The new state to shift in */ - int yyMajor, /* The major token to shift in */ - YYMINORTYPE *yypMinor /* Pointer to the minor token to shift in */ -){ - yyStackEntry *yytos; - yypParser->yyidx++; -#ifdef YYTRACKMAXSTACKDEPTH - if( yypParser->yyidx>yypParser->yyidxMax ){ - yypParser->yyidxMax = yypParser->yyidx; - } -#endif -#if YYSTACKDEPTH>0 - if( yypParser->yyidx>=YYSTACKDEPTH ){ - yyStackOverflow(yypParser, yypMinor); - return; - } -#else - if( yypParser->yyidx>=yypParser->yystksz ){ - yyGrowStack(yypParser); - if( yypParser->yyidx>=yypParser->yystksz ){ - yyStackOverflow(yypParser, yypMinor); - return; + va_start(ap, op); + switch( op ){ + + /* Mutex configuration options are only available in a threadsafe + ** compile. + */ +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 + case SQLITE_CONFIG_SINGLETHREAD: { + /* Disable all mutexing */ + sqlite3GlobalConfig.bCoreMutex = 0; + sqlite3GlobalConfig.bFullMutex = 0; + break; + } + case SQLITE_CONFIG_MULTITHREAD: { + /* Disable mutexing of database connections */ + /* Enable mutexing of core data structures */ + sqlite3GlobalConfig.bCoreMutex = 1; + sqlite3GlobalConfig.bFullMutex = 0; + break; + } + case SQLITE_CONFIG_SERIALIZED: { + /* Enable all mutexing */ + sqlite3GlobalConfig.bCoreMutex = 1; + sqlite3GlobalConfig.bFullMutex = 1; + break; + } + case SQLITE_CONFIG_MUTEX: { + /* Specify an alternative mutex implementation */ + sqlite3GlobalConfig.mutex = *va_arg(ap, sqlite3_mutex_methods*); + break; + } + case SQLITE_CONFIG_GETMUTEX: { + /* Retrieve the current mutex implementation */ + *va_arg(ap, sqlite3_mutex_methods*) = sqlite3GlobalConfig.mutex; + break; } - } -#endif - yytos = &yypParser->yystack[yypParser->yyidx]; - yytos->stateno = (YYACTIONTYPE)yyNewState; - yytos->major = (YYCODETYPE)yyMajor; - yytos->minor = *yypMinor; -#ifndef NDEBUG - if( yyTraceFILE && yypParser->yyidx>0 ){ - int i; - fprintf(yyTraceFILE,"%sShift %d\n",yyTracePrompt,yyNewState); - fprintf(yyTraceFILE,"%sStack:",yyTracePrompt); - for(i=1; i<=yypParser->yyidx; i++) - fprintf(yyTraceFILE," %s",yyTokenName[yypParser->yystack[i].major]); - fprintf(yyTraceFILE,"\n"); - } #endif -} -/* The following table contains information about every rule that -** is used during the reduce. -*/ -static const struct { - YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ - unsigned char nrhs; /* Number of right-hand side symbols in the rule */ -} yyRuleInfo[] = { - { 142, 1 }, - { 143, 2 }, - { 143, 1 }, - { 144, 1 }, - { 144, 3 }, - { 145, 0 }, - { 145, 1 }, - { 145, 3 }, - { 146, 1 }, - { 147, 3 }, - { 149, 0 }, - { 149, 1 }, - { 149, 2 }, - { 148, 0 }, - { 148, 1 }, - { 148, 1 }, - { 148, 1 }, - { 147, 2 }, - { 147, 2 }, - { 147, 2 }, - { 151, 1 }, - { 151, 0 }, - { 147, 2 }, - { 147, 3 }, - { 147, 5 }, - { 147, 2 }, - { 152, 6 }, - { 154, 1 }, - { 156, 0 }, - { 156, 3 }, - { 155, 1 }, - { 155, 0 }, - { 153, 4 }, - { 153, 2 }, - { 158, 3 }, - { 158, 1 }, - { 161, 3 }, - { 162, 1 }, - { 165, 1 }, - { 165, 1 }, - { 166, 1 }, - { 150, 1 }, - { 150, 1 }, - { 150, 1 }, - { 163, 0 }, - { 163, 1 }, - { 167, 1 }, - { 167, 4 }, - { 167, 6 }, - { 168, 1 }, - { 168, 2 }, - { 169, 1 }, - { 169, 1 }, - { 164, 2 }, - { 164, 0 }, - { 172, 3 }, - { 172, 1 }, - { 173, 2 }, - { 173, 4 }, - { 173, 3 }, - { 173, 3 }, - { 173, 2 }, - { 173, 2 }, - { 173, 3 }, - { 173, 5 }, - { 173, 2 }, - { 173, 4 }, - { 173, 4 }, - { 173, 1 }, - { 173, 2 }, - { 178, 0 }, - { 178, 1 }, - { 180, 0 }, - { 180, 2 }, - { 182, 2 }, - { 182, 3 }, - { 182, 3 }, - { 182, 3 }, - { 183, 2 }, - { 183, 2 }, - { 183, 1 }, - { 183, 1 }, - { 183, 2 }, - { 181, 3 }, - { 181, 2 }, - { 184, 0 }, - { 184, 2 }, - { 184, 2 }, - { 159, 0 }, - { 159, 2 }, - { 185, 3 }, - { 185, 2 }, - { 185, 1 }, - { 186, 2 }, - { 186, 7 }, - { 186, 5 }, - { 186, 5 }, - { 186, 10 }, - { 188, 0 }, - { 188, 1 }, - { 176, 0 }, - { 176, 3 }, - { 189, 0 }, - { 189, 2 }, - { 190, 1 }, - { 190, 1 }, - { 190, 1 }, - { 147, 4 }, - { 192, 2 }, - { 192, 0 }, - { 147, 8 }, - { 147, 4 }, - { 147, 1 }, - { 160, 1 }, - { 160, 3 }, - { 195, 1 }, - { 195, 2 }, - { 195, 1 }, - { 194, 9 }, - { 196, 1 }, - { 196, 1 }, - { 196, 0 }, - { 204, 2 }, - { 204, 0 }, - { 197, 3 }, - { 197, 2 }, - { 197, 4 }, - { 205, 2 }, - { 205, 1 }, - { 205, 0 }, - { 198, 0 }, - { 198, 2 }, - { 207, 2 }, - { 207, 0 }, - { 206, 7 }, - { 206, 7 }, - { 206, 7 }, - { 157, 0 }, - { 157, 2 }, - { 193, 2 }, - { 208, 1 }, - { 208, 2 }, - { 208, 3 }, - { 208, 4 }, - { 210, 2 }, - { 210, 0 }, - { 209, 0 }, - { 209, 3 }, - { 209, 2 }, - { 211, 4 }, - { 211, 0 }, - { 202, 0 }, - { 202, 3 }, - { 214, 4 }, - { 214, 2 }, - { 215, 1 }, - { 177, 1 }, - { 177, 1 }, - { 177, 0 }, - { 200, 0 }, - { 200, 3 }, - { 201, 0 }, - { 201, 2 }, - { 203, 0 }, - { 203, 2 }, - { 203, 4 }, - { 203, 4 }, - { 147, 5 }, - { 199, 0 }, - { 199, 2 }, - { 147, 7 }, - { 217, 5 }, - { 217, 3 }, - { 147, 8 }, - { 147, 5 }, - { 147, 6 }, - { 218, 2 }, - { 218, 1 }, - { 220, 3 }, - { 220, 1 }, - { 219, 0 }, - { 219, 3 }, - { 213, 3 }, - { 213, 1 }, - { 175, 1 }, - { 175, 3 }, - { 174, 1 }, - { 175, 1 }, - { 175, 1 }, - { 175, 3 }, - { 175, 5 }, - { 174, 1 }, - { 174, 1 }, - { 175, 1 }, - { 175, 1 }, - { 175, 3 }, - { 175, 6 }, - { 175, 5 }, - { 175, 4 }, - { 174, 1 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 175, 3 }, - { 222, 1 }, - { 222, 2 }, - { 222, 1 }, - { 222, 2 }, - { 175, 3 }, - { 175, 5 }, - { 175, 2 }, - { 175, 3 }, - { 175, 3 }, - { 175, 4 }, - { 175, 2 }, - { 175, 2 }, - { 175, 2 }, - { 175, 2 }, - { 223, 1 }, - { 223, 2 }, - { 175, 5 }, - { 224, 1 }, - { 224, 2 }, - { 175, 5 }, - { 175, 3 }, - { 175, 5 }, - { 175, 4 }, - { 175, 4 }, - { 175, 5 }, - { 226, 5 }, - { 226, 4 }, - { 227, 2 }, - { 227, 0 }, - { 225, 1 }, - { 225, 0 }, - { 221, 1 }, - { 221, 0 }, - { 216, 3 }, - { 216, 1 }, - { 147, 11 }, - { 228, 1 }, - { 228, 0 }, - { 179, 0 }, - { 179, 3 }, - { 187, 5 }, - { 187, 3 }, - { 229, 0 }, - { 229, 2 }, - { 147, 4 }, - { 147, 1 }, - { 147, 2 }, - { 147, 3 }, - { 147, 5 }, - { 147, 6 }, - { 147, 5 }, - { 147, 6 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 170, 2 }, - { 171, 2 }, - { 232, 1 }, - { 231, 1 }, - { 231, 0 }, - { 147, 5 }, - { 233, 11 }, - { 235, 1 }, - { 235, 1 }, - { 235, 2 }, - { 235, 0 }, - { 236, 1 }, - { 236, 1 }, - { 236, 3 }, - { 237, 0 }, - { 237, 3 }, - { 238, 0 }, - { 238, 2 }, - { 234, 3 }, - { 234, 2 }, - { 240, 1 }, - { 240, 3 }, - { 241, 0 }, - { 241, 3 }, - { 241, 2 }, - { 239, 7 }, - { 239, 8 }, - { 239, 5 }, - { 239, 5 }, - { 239, 1 }, - { 175, 4 }, - { 175, 6 }, - { 191, 1 }, - { 191, 1 }, - { 191, 1 }, - { 147, 4 }, - { 147, 6 }, - { 147, 3 }, - { 243, 0 }, - { 243, 2 }, - { 242, 1 }, - { 242, 0 }, - { 147, 1 }, - { 147, 3 }, - { 147, 1 }, - { 147, 3 }, - { 147, 6 }, - { 147, 6 }, - { 244, 1 }, - { 245, 0 }, - { 245, 1 }, - { 147, 1 }, - { 147, 4 }, - { 246, 7 }, - { 247, 1 }, - { 247, 3 }, - { 248, 0 }, - { 248, 2 }, - { 249, 1 }, - { 249, 3 }, - { 250, 1 }, - { 251, 0 }, - { 251, 4 }, - { 251, 2 }, -}; -static void yy_accept(yyParser*); /* Forward Declaration */ + case SQLITE_CONFIG_MALLOC: { + /* Specify an alternative malloc implementation */ + sqlite3GlobalConfig.m = *va_arg(ap, sqlite3_mem_methods*); + break; + } + case SQLITE_CONFIG_GETMALLOC: { + /* Retrieve the current malloc() implementation */ + if( sqlite3GlobalConfig.m.xMalloc==0 ) sqlite3MemSetDefault(); + *va_arg(ap, sqlite3_mem_methods*) = sqlite3GlobalConfig.m; + break; + } + case SQLITE_CONFIG_MEMSTATUS: { + /* Enable or disable the malloc status collection */ + sqlite3GlobalConfig.bMemstat = va_arg(ap, int); + break; + } + case SQLITE_CONFIG_SCRATCH: { + /* Designate a buffer for scratch memory space */ + sqlite3GlobalConfig.pScratch = va_arg(ap, void*); + sqlite3GlobalConfig.szScratch = va_arg(ap, int); + sqlite3GlobalConfig.nScratch = va_arg(ap, int); + break; + } + case SQLITE_CONFIG_PAGECACHE: { + /* Designate a buffer for page cache memory space */ + sqlite3GlobalConfig.pPage = va_arg(ap, void*); + sqlite3GlobalConfig.szPage = va_arg(ap, int); + sqlite3GlobalConfig.nPage = va_arg(ap, int); + break; + } + + case SQLITE_CONFIG_PCACHE: { + /* no-op */ + break; + } + case SQLITE_CONFIG_GETPCACHE: { + /* now an error */ + rc = SQLITE_ERROR; + break; + } + + case SQLITE_CONFIG_PCACHE2: { + /* Specify an alternative page cache implementation */ + sqlite3GlobalConfig.pcache2 = *va_arg(ap, sqlite3_pcache_methods2*); + break; + } + case SQLITE_CONFIG_GETPCACHE2: { + if( sqlite3GlobalConfig.pcache2.xInit==0 ){ + sqlite3PCacheSetDefault(); + } + *va_arg(ap, sqlite3_pcache_methods2*) = sqlite3GlobalConfig.pcache2; + break; + } + +#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5) + case SQLITE_CONFIG_HEAP: { + /* Designate a buffer for heap memory space */ + sqlite3GlobalConfig.pHeap = va_arg(ap, void*); + sqlite3GlobalConfig.nHeap = va_arg(ap, int); + sqlite3GlobalConfig.mnReq = va_arg(ap, int); + + if( sqlite3GlobalConfig.mnReq<1 ){ + sqlite3GlobalConfig.mnReq = 1; + }else if( sqlite3GlobalConfig.mnReq>(1<<12) ){ + /* cap min request size at 2^12 */ + sqlite3GlobalConfig.mnReq = (1<<12); + } + + if( sqlite3GlobalConfig.pHeap==0 ){ + /* If the heap pointer is NULL, then restore the malloc implementation + ** back to NULL pointers too. This will cause the malloc to go + ** back to its default implementation when sqlite3_initialize() is + ** run. + */ + memset(&sqlite3GlobalConfig.m, 0, sizeof(sqlite3GlobalConfig.m)); + }else{ + /* The heap pointer is not NULL, then install one of the + ** mem5.c/mem3.c methods. The enclosing #if guarantees at + ** least one of these methods is currently enabled. + */ +#ifdef SQLITE_ENABLE_MEMSYS3 + sqlite3GlobalConfig.m = *sqlite3MemGetMemsys3(); +#endif +#ifdef SQLITE_ENABLE_MEMSYS5 + sqlite3GlobalConfig.m = *sqlite3MemGetMemsys5(); +#endif + } + break; + } +#endif + + case SQLITE_CONFIG_LOOKASIDE: { + sqlite3GlobalConfig.szLookaside = va_arg(ap, int); + sqlite3GlobalConfig.nLookaside = va_arg(ap, int); + break; + } + + /* Record a pointer to the logger function and its first argument. + ** The default is NULL. Logging is disabled if the function pointer is + ** NULL. + */ + case SQLITE_CONFIG_LOG: { + /* MSVC is picky about pulling func ptrs from va lists. + ** http://support.microsoft.com/kb/47961 + ** sqlite3GlobalConfig.xLog = va_arg(ap, void(*)(void*,int,const char*)); + */ + typedef void(*LOGFUNC_t)(void*,int,const char*); + sqlite3GlobalConfig.xLog = va_arg(ap, LOGFUNC_t); + sqlite3GlobalConfig.pLogArg = va_arg(ap, void*); + break; + } + + /* EVIDENCE-OF: R-55548-33817 The compile-time setting for URI filenames + ** can be changed at start-time using the + ** sqlite3_config(SQLITE_CONFIG_URI,1) or + ** sqlite3_config(SQLITE_CONFIG_URI,0) configuration calls. + */ + case SQLITE_CONFIG_URI: { + sqlite3GlobalConfig.bOpenUri = va_arg(ap, int); + break; + } + + case SQLITE_CONFIG_COVERING_INDEX_SCAN: { + sqlite3GlobalConfig.bUseCis = va_arg(ap, int); + break; + } + +#ifdef SQLITE_ENABLE_SQLLOG + case SQLITE_CONFIG_SQLLOG: { + typedef void(*SQLLOGFUNC_t)(void*, sqlite3*, const char*, int); + sqlite3GlobalConfig.xSqllog = va_arg(ap, SQLLOGFUNC_t); + sqlite3GlobalConfig.pSqllogArg = va_arg(ap, void *); + break; + } +#endif + + case SQLITE_CONFIG_MMAP_SIZE: { + sqlite3_int64 szMmap = va_arg(ap, sqlite3_int64); + sqlite3_int64 mxMmap = va_arg(ap, sqlite3_int64); + if( mxMmap<0 || mxMmap>SQLITE_MAX_MMAP_SIZE ){ + mxMmap = SQLITE_MAX_MMAP_SIZE; + } + sqlite3GlobalConfig.mxMmap = mxMmap; + if( szMmap<0 ) szMmap = SQLITE_DEFAULT_MMAP_SIZE; + if( szMmap>mxMmap) szMmap = mxMmap; + sqlite3GlobalConfig.szMmap = szMmap; + break; + } + +#if SQLITE_OS_WIN && defined(SQLITE_WIN32_MALLOC) + case SQLITE_CONFIG_WIN32_HEAPSIZE: { + sqlite3GlobalConfig.nHeap = va_arg(ap, int); + break; + } +#endif + + default: { + rc = SQLITE_ERROR; + break; + } + } + va_end(ap); + return rc; +} /* -** Perform a reduce action and the shift that must immediately -** follow the reduce. +** Set up the lookaside buffers for a database connection. +** Return SQLITE_OK on success. +** If lookaside is already active, return SQLITE_BUSY. +** +** The sz parameter is the number of bytes in each lookaside slot. +** The cnt parameter is the number of slots. If pStart is NULL the +** space for the lookaside memory is obtained from sqlite3_malloc(). +** If pStart is not NULL then it is sz*cnt bytes of memory to use for +** the lookaside memory. */ -static void yy_reduce( - yyParser *yypParser, /* The parser */ - int yyruleno /* Number of the rule by which to reduce */ -){ - int yygoto; /* The next state */ - int yyact; /* The next action */ - YYMINORTYPE yygotominor; /* The LHS of the rule reduced */ - yyStackEntry *yymsp; /* The top of the parser's stack */ - int yysize; /* Amount to pop the stack */ - sqlite3ParserARG_FETCH; - yymsp = &yypParser->yystack[yypParser->yyidx]; -#ifndef NDEBUG - if( yyTraceFILE && yyruleno>=0 - && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){ - fprintf(yyTraceFILE, "%sReduce [%s].\n", yyTracePrompt, - yyRuleName[yyruleno]); +static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ + void *pStart; + if( db->lookaside.nOut ){ + return SQLITE_BUSY; } -#endif /* NDEBUG */ - - /* Silence complaints from purify about yygotominor being uninitialized - ** in some cases when it is copied into the stack after the following - ** switch. yygotominor is uninitialized when a rule reduces that does - ** not set the value of its left-hand side nonterminal. Leaving the - ** value of the nonterminal uninitialized is utterly harmless as long - ** as the value is never used. So really the only thing this code - ** accomplishes is to quieten purify. - ** - ** 2007-01-16: The wireshark project (www.wireshark.org) reports that - ** without this code, their parser segfaults. I'm not sure what there - ** parser is doing to make this happen. This is the second bug report - ** from wireshark this week. Clearly they are stressing Lemon in ways - ** that it has not been previously stressed... (SQLite ticket #2172) + /* Free any existing lookaside buffer for this handle before + ** allocating a new one so we don't have to have space for + ** both at the same time. */ - /*memset(&yygotominor, 0, sizeof(yygotominor));*/ - yygotominor = yyzerominor; - - - switch( yyruleno ){ - /* Beginning here are the reduction cases. A typical example - ** follows: - ** case 0: - ** #line - ** { ... } // User supplied code - ** #line - ** break; + if( db->lookaside.bMalloced ){ + sqlite3_free(db->lookaside.pStart); + } + /* The size of a lookaside slot after ROUNDDOWN8 needs to be larger + ** than a pointer to be useful. */ - case 5: /* explain ::= */ -{ sqlite3BeginParse(pParse, 0); } - break; - case 6: /* explain ::= EXPLAIN */ -{ sqlite3BeginParse(pParse, 1); } - break; - case 7: /* explain ::= EXPLAIN QUERY PLAN */ -{ sqlite3BeginParse(pParse, 2); } - break; - case 8: /* cmdx ::= cmd */ -{ sqlite3FinishCoding(pParse); } - break; - case 9: /* cmd ::= BEGIN transtype trans_opt */ -{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy4);} - break; - case 13: /* transtype ::= */ -{yygotominor.yy4 = TK_DEFERRED;} - break; - case 14: /* transtype ::= DEFERRED */ - case 15: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==15); - case 16: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==16); - case 115: /* multiselect_op ::= UNION */ yytestcase(yyruleno==115); - case 117: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==117); -{yygotominor.yy4 = yymsp[0].major;} - break; - case 17: /* cmd ::= COMMIT trans_opt */ - case 18: /* cmd ::= END trans_opt */ yytestcase(yyruleno==18); -{sqlite3CommitTransaction(pParse);} - break; - case 19: /* cmd ::= ROLLBACK trans_opt */ -{sqlite3RollbackTransaction(pParse);} - break; - case 22: /* cmd ::= SAVEPOINT nm */ -{ - sqlite3Savepoint(pParse, SAVEPOINT_BEGIN, &yymsp[0].minor.yy0); -} - break; - case 23: /* cmd ::= RELEASE savepoint_opt nm */ -{ - sqlite3Savepoint(pParse, SAVEPOINT_RELEASE, &yymsp[0].minor.yy0); -} - break; - case 24: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ -{ - sqlite3Savepoint(pParse, SAVEPOINT_ROLLBACK, &yymsp[0].minor.yy0); -} - break; - case 26: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */ -{ - sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy4,0,0,yymsp[-2].minor.yy4); -} - break; - case 27: /* createkw ::= CREATE */ -{ - pParse->db->lookaside.bEnabled = 0; - yygotominor.yy0 = yymsp[0].minor.yy0; -} - break; - case 28: /* ifnotexists ::= */ - case 31: /* temp ::= */ yytestcase(yyruleno==31); - case 70: /* autoinc ::= */ yytestcase(yyruleno==70); - case 83: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ yytestcase(yyruleno==83); - case 85: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==85); - case 87: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ yytestcase(yyruleno==87); - case 98: /* defer_subclause_opt ::= */ yytestcase(yyruleno==98); - case 109: /* ifexists ::= */ yytestcase(yyruleno==109); - case 120: /* distinct ::= ALL */ yytestcase(yyruleno==120); - case 121: /* distinct ::= */ yytestcase(yyruleno==121); - case 222: /* between_op ::= BETWEEN */ yytestcase(yyruleno==222); - case 225: /* in_op ::= IN */ yytestcase(yyruleno==225); -{yygotominor.yy4 = 0;} - break; - case 29: /* ifnotexists ::= IF NOT EXISTS */ - case 30: /* temp ::= TEMP */ yytestcase(yyruleno==30); - case 71: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==71); - case 86: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ yytestcase(yyruleno==86); - case 108: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==108); - case 119: /* distinct ::= DISTINCT */ yytestcase(yyruleno==119); - case 223: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==223); - case 226: /* in_op ::= NOT IN */ yytestcase(yyruleno==226); -{yygotominor.yy4 = 1;} - break; - case 32: /* create_table_args ::= LP columnlist conslist_opt RP */ -{ - sqlite3EndTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0); -} - break; - case 33: /* create_table_args ::= AS select */ -{ - sqlite3EndTable(pParse,0,0,yymsp[0].minor.yy387); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy387); -} - break; - case 36: /* column ::= columnid type carglist */ -{ - yygotominor.yy0.z = yymsp[-2].minor.yy0.z; - yygotominor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-2].minor.yy0.z) + pParse->sLastToken.n; -} - break; - case 37: /* columnid ::= nm */ -{ - sqlite3AddColumn(pParse,&yymsp[0].minor.yy0); - yygotominor.yy0 = yymsp[0].minor.yy0; -} - break; - case 38: /* id ::= ID */ - case 39: /* id ::= INDEXED */ yytestcase(yyruleno==39); - case 40: /* ids ::= ID|STRING */ yytestcase(yyruleno==40); - case 41: /* nm ::= id */ yytestcase(yyruleno==41); - case 42: /* nm ::= STRING */ yytestcase(yyruleno==42); - case 43: /* nm ::= JOIN_KW */ yytestcase(yyruleno==43); - case 46: /* typetoken ::= typename */ yytestcase(yyruleno==46); - case 49: /* typename ::= ids */ yytestcase(yyruleno==49); - case 127: /* as ::= AS nm */ yytestcase(yyruleno==127); - case 128: /* as ::= ids */ yytestcase(yyruleno==128); - case 138: /* dbnm ::= DOT nm */ yytestcase(yyruleno==138); - case 147: /* indexed_opt ::= INDEXED BY nm */ yytestcase(yyruleno==147); - case 251: /* collate ::= COLLATE ids */ yytestcase(yyruleno==251); - case 260: /* nmnum ::= plus_num */ yytestcase(yyruleno==260); - case 261: /* nmnum ::= nm */ yytestcase(yyruleno==261); - case 262: /* nmnum ::= ON */ yytestcase(yyruleno==262); - case 263: /* nmnum ::= DELETE */ yytestcase(yyruleno==263); - case 264: /* nmnum ::= DEFAULT */ yytestcase(yyruleno==264); - case 265: /* plus_num ::= plus_opt number */ yytestcase(yyruleno==265); - case 266: /* minus_num ::= MINUS number */ yytestcase(yyruleno==266); - case 267: /* number ::= INTEGER|FLOAT */ yytestcase(yyruleno==267); - case 285: /* trnm ::= nm */ yytestcase(yyruleno==285); -{yygotominor.yy0 = yymsp[0].minor.yy0;} - break; - case 45: /* type ::= typetoken */ -{sqlite3AddColumnType(pParse,&yymsp[0].minor.yy0);} - break; - case 47: /* typetoken ::= typename LP signed RP */ -{ - yygotominor.yy0.z = yymsp[-3].minor.yy0.z; - yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-3].minor.yy0.z); -} - break; - case 48: /* typetoken ::= typename LP signed COMMA signed RP */ -{ - yygotominor.yy0.z = yymsp[-5].minor.yy0.z; - yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-5].minor.yy0.z); -} - break; - case 50: /* typename ::= typename ids */ -{yygotominor.yy0.z=yymsp[-1].minor.yy0.z; yygotominor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);} - break; - case 57: /* ccons ::= DEFAULT term */ - case 59: /* ccons ::= DEFAULT PLUS term */ yytestcase(yyruleno==59); -{sqlite3AddDefaultValue(pParse,&yymsp[0].minor.yy118);} - break; - case 58: /* ccons ::= DEFAULT LP expr RP */ -{sqlite3AddDefaultValue(pParse,&yymsp[-1].minor.yy118);} - break; - case 60: /* ccons ::= DEFAULT MINUS term */ -{ - ExprSpan v; - v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy118.pExpr, 0, 0); - v.zStart = yymsp[-1].minor.yy0.z; - v.zEnd = yymsp[0].minor.yy118.zEnd; - sqlite3AddDefaultValue(pParse,&v); -} - break; - case 61: /* ccons ::= DEFAULT id */ -{ - ExprSpan v; - spanExpr(&v, pParse, TK_STRING, &yymsp[0].minor.yy0); - sqlite3AddDefaultValue(pParse,&v); -} - break; - case 63: /* ccons ::= NOT NULL onconf */ -{sqlite3AddNotNull(pParse, yymsp[0].minor.yy4);} - break; - case 64: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */ -{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy4,yymsp[0].minor.yy4,yymsp[-2].minor.yy4);} - break; - case 65: /* ccons ::= UNIQUE onconf */ -{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy4,0,0,0,0);} - break; - case 66: /* ccons ::= CHECK LP expr RP */ -{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy118.pExpr);} - break; - case 67: /* ccons ::= REFERENCES nm idxlist_opt refargs */ -{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy322,yymsp[0].minor.yy4);} - break; - case 68: /* ccons ::= defer_subclause */ -{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy4);} - break; - case 69: /* ccons ::= COLLATE ids */ -{sqlite3AddCollateType(pParse, &yymsp[0].minor.yy0);} - break; - case 72: /* refargs ::= */ -{ yygotominor.yy4 = OE_None*0x0101; /* EV: R-19803-45884 */} - break; - case 73: /* refargs ::= refargs refarg */ -{ yygotominor.yy4 = (yymsp[-1].minor.yy4 & ~yymsp[0].minor.yy215.mask) | yymsp[0].minor.yy215.value; } - break; - case 74: /* refarg ::= MATCH nm */ - case 75: /* refarg ::= ON INSERT refact */ yytestcase(yyruleno==75); -{ yygotominor.yy215.value = 0; yygotominor.yy215.mask = 0x000000; } - break; - case 76: /* refarg ::= ON DELETE refact */ -{ yygotominor.yy215.value = yymsp[0].minor.yy4; yygotominor.yy215.mask = 0x0000ff; } - break; - case 77: /* refarg ::= ON UPDATE refact */ -{ yygotominor.yy215.value = yymsp[0].minor.yy4<<8; yygotominor.yy215.mask = 0x00ff00; } - break; - case 78: /* refact ::= SET NULL */ -{ yygotominor.yy4 = OE_SetNull; /* EV: R-33326-45252 */} - break; - case 79: /* refact ::= SET DEFAULT */ -{ yygotominor.yy4 = OE_SetDflt; /* EV: R-33326-45252 */} - break; - case 80: /* refact ::= CASCADE */ -{ yygotominor.yy4 = OE_Cascade; /* EV: R-33326-45252 */} - break; - case 81: /* refact ::= RESTRICT */ -{ yygotominor.yy4 = OE_Restrict; /* EV: R-33326-45252 */} - break; - case 82: /* refact ::= NO ACTION */ -{ yygotominor.yy4 = OE_None; /* EV: R-33326-45252 */} - break; - case 84: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ - case 99: /* defer_subclause_opt ::= defer_subclause */ yytestcase(yyruleno==99); - case 101: /* onconf ::= ON CONFLICT resolvetype */ yytestcase(yyruleno==101); - case 104: /* resolvetype ::= raisetype */ yytestcase(yyruleno==104); -{yygotominor.yy4 = yymsp[0].minor.yy4;} - break; - case 88: /* conslist_opt ::= */ -{yygotominor.yy0.n = 0; yygotominor.yy0.z = 0;} - break; - case 89: /* conslist_opt ::= COMMA conslist */ -{yygotominor.yy0 = yymsp[-1].minor.yy0;} - break; - case 94: /* tcons ::= PRIMARY KEY LP idxlist autoinc RP onconf */ -{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy322,yymsp[0].minor.yy4,yymsp[-2].minor.yy4,0);} - break; - case 95: /* tcons ::= UNIQUE LP idxlist RP onconf */ -{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy322,yymsp[0].minor.yy4,0,0,0,0);} - break; - case 96: /* tcons ::= CHECK LP expr RP onconf */ -{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy118.pExpr);} - break; - case 97: /* tcons ::= FOREIGN KEY LP idxlist RP REFERENCES nm idxlist_opt refargs defer_subclause_opt */ -{ - sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy322, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy322, yymsp[-1].minor.yy4); - sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy4); -} - break; - case 100: /* onconf ::= */ -{yygotominor.yy4 = OE_Default;} - break; - case 102: /* orconf ::= */ -{yygotominor.yy210 = OE_Default;} - break; - case 103: /* orconf ::= OR resolvetype */ -{yygotominor.yy210 = (u8)yymsp[0].minor.yy4;} - break; - case 105: /* resolvetype ::= IGNORE */ -{yygotominor.yy4 = OE_Ignore;} - break; - case 106: /* resolvetype ::= REPLACE */ -{yygotominor.yy4 = OE_Replace;} - break; - case 107: /* cmd ::= DROP TABLE ifexists fullname */ -{ - sqlite3DropTable(pParse, yymsp[0].minor.yy259, 0, yymsp[-1].minor.yy4); -} - break; - case 110: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm AS select */ -{ - sqlite3CreateView(pParse, &yymsp[-7].minor.yy0, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, yymsp[0].minor.yy387, yymsp[-6].minor.yy4, yymsp[-4].minor.yy4); -} - break; - case 111: /* cmd ::= DROP VIEW ifexists fullname */ -{ - sqlite3DropTable(pParse, yymsp[0].minor.yy259, 1, yymsp[-1].minor.yy4); -} - break; - case 112: /* cmd ::= select */ -{ - SelectDest dest = {SRT_Output, 0, 0, 0, 0}; - sqlite3Select(pParse, yymsp[0].minor.yy387, &dest); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy387); -} - break; - case 113: /* select ::= oneselect */ -{yygotominor.yy387 = yymsp[0].minor.yy387;} - break; - case 114: /* select ::= select multiselect_op oneselect */ -{ - if( yymsp[0].minor.yy387 ){ - yymsp[0].minor.yy387->op = (u8)yymsp[-1].minor.yy4; - yymsp[0].minor.yy387->pPrior = yymsp[-2].minor.yy387; + sz = ROUNDDOWN8(sz); /* IMP: R-33038-09382 */ + if( sz<=(int)sizeof(LookasideSlot*) ) sz = 0; + if( cnt<0 ) cnt = 0; + if( sz==0 || cnt==0 ){ + sz = 0; + pStart = 0; + }else if( pBuf==0 ){ + sqlite3BeginBenignMalloc(); + pStart = sqlite3Malloc( sz*cnt ); /* IMP: R-61949-35727 */ + sqlite3EndBenignMalloc(); + if( pStart ) cnt = sqlite3MallocSize(pStart)/sz; }else{ - sqlite3SelectDelete(pParse->db, yymsp[-2].minor.yy387); - } - yygotominor.yy387 = yymsp[0].minor.yy387; -} - break; - case 116: /* multiselect_op ::= UNION ALL */ -{yygotominor.yy4 = TK_ALL;} - break; - case 118: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ -{ - yygotominor.yy387 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy322,yymsp[-5].minor.yy259,yymsp[-4].minor.yy314,yymsp[-3].minor.yy322,yymsp[-2].minor.yy314,yymsp[-1].minor.yy322,yymsp[-7].minor.yy4,yymsp[0].minor.yy292.pLimit,yymsp[0].minor.yy292.pOffset); -} - break; - case 122: /* sclp ::= selcollist COMMA */ - case 247: /* idxlist_opt ::= LP idxlist RP */ yytestcase(yyruleno==247); -{yygotominor.yy322 = yymsp[-1].minor.yy322;} - break; - case 123: /* sclp ::= */ - case 151: /* orderby_opt ::= */ yytestcase(yyruleno==151); - case 159: /* groupby_opt ::= */ yytestcase(yyruleno==159); - case 240: /* exprlist ::= */ yytestcase(yyruleno==240); - case 246: /* idxlist_opt ::= */ yytestcase(yyruleno==246); -{yygotominor.yy322 = 0;} - break; - case 124: /* selcollist ::= sclp expr as */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy322, yymsp[-1].minor.yy118.pExpr); - if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yygotominor.yy322, &yymsp[0].minor.yy0, 1); - sqlite3ExprListSetSpan(pParse,yygotominor.yy322,&yymsp[-1].minor.yy118); -} - break; - case 125: /* selcollist ::= sclp STAR */ -{ - Expr *p = sqlite3Expr(pParse->db, TK_ALL, 0); - yygotominor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-1].minor.yy322, p); -} - break; - case 126: /* selcollist ::= sclp nm DOT STAR */ -{ - Expr *pRight = sqlite3PExpr(pParse, TK_ALL, 0, 0, &yymsp[0].minor.yy0); - Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); - Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy322, pDot); -} - break; - case 129: /* as ::= */ -{yygotominor.yy0.n = 0;} - break; - case 130: /* from ::= */ -{yygotominor.yy259 = sqlite3DbMallocZero(pParse->db, sizeof(*yygotominor.yy259));} - break; - case 131: /* from ::= FROM seltablist */ -{ - yygotominor.yy259 = yymsp[0].minor.yy259; - sqlite3SrcListShiftJoinType(yygotominor.yy259); -} - break; - case 132: /* stl_prefix ::= seltablist joinop */ -{ - yygotominor.yy259 = yymsp[-1].minor.yy259; - if( ALWAYS(yygotominor.yy259 && yygotominor.yy259->nSrc>0) ) yygotominor.yy259->a[yygotominor.yy259->nSrc-1].jointype = (u8)yymsp[0].minor.yy4; -} - break; - case 133: /* stl_prefix ::= */ -{yygotominor.yy259 = 0;} - break; - case 134: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ -{ - yygotominor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy314,yymsp[0].minor.yy384); - sqlite3SrcListIndexedBy(pParse, yygotominor.yy259, &yymsp[-2].minor.yy0); -} - break; - case 135: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ -{ - yygotominor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy387,yymsp[-1].minor.yy314,yymsp[0].minor.yy384); + pStart = pBuf; } - break; - case 136: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ -{ - if( yymsp[-6].minor.yy259==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy314==0 && yymsp[0].minor.yy384==0 ){ - yygotominor.yy259 = yymsp[-4].minor.yy259; - }else{ - Select *pSubquery; - sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy259); - pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy259,0,0,0,0,0,0,0); - yygotominor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy314,yymsp[0].minor.yy384); + db->lookaside.pStart = pStart; + db->lookaside.pFree = 0; + db->lookaside.sz = (u16)sz; + if( pStart ){ + int i; + LookasideSlot *p; + assert( sz > (int)sizeof(LookasideSlot*) ); + p = (LookasideSlot*)pStart; + for(i=cnt-1; i>=0; i--){ + p->pNext = db->lookaside.pFree; + db->lookaside.pFree = p; + p = (LookasideSlot*)&((u8*)p)[sz]; } + db->lookaside.pEnd = p; + db->lookaside.bEnabled = 1; + db->lookaside.bMalloced = pBuf==0 ?1:0; + }else{ + db->lookaside.pStart = db; + db->lookaside.pEnd = db; + db->lookaside.bEnabled = 0; + db->lookaside.bMalloced = 0; } - break; - case 137: /* dbnm ::= */ - case 146: /* indexed_opt ::= */ yytestcase(yyruleno==146); -{yygotominor.yy0.z=0; yygotominor.yy0.n=0;} - break; - case 139: /* fullname ::= nm dbnm */ -{yygotominor.yy259 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);} - break; - case 140: /* joinop ::= COMMA|JOIN */ -{ yygotominor.yy4 = JT_INNER; } - break; - case 141: /* joinop ::= JOIN_KW JOIN */ -{ yygotominor.yy4 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); } - break; - case 142: /* joinop ::= JOIN_KW nm JOIN */ -{ yygotominor.yy4 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); } - break; - case 143: /* joinop ::= JOIN_KW nm nm JOIN */ -{ yygotominor.yy4 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); } - break; - case 144: /* on_opt ::= ON expr */ - case 155: /* sortitem ::= expr */ yytestcase(yyruleno==155); - case 162: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==162); - case 169: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==169); - case 235: /* case_else ::= ELSE expr */ yytestcase(yyruleno==235); - case 237: /* case_operand ::= expr */ yytestcase(yyruleno==237); -{yygotominor.yy314 = yymsp[0].minor.yy118.pExpr;} - break; - case 145: /* on_opt ::= */ - case 161: /* having_opt ::= */ yytestcase(yyruleno==161); - case 168: /* where_opt ::= */ yytestcase(yyruleno==168); - case 236: /* case_else ::= */ yytestcase(yyruleno==236); - case 238: /* case_operand ::= */ yytestcase(yyruleno==238); -{yygotominor.yy314 = 0;} - break; - case 148: /* indexed_opt ::= NOT INDEXED */ -{yygotominor.yy0.z=0; yygotominor.yy0.n=1;} - break; - case 149: /* using_opt ::= USING LP inscollist RP */ - case 181: /* inscollist_opt ::= LP inscollist RP */ yytestcase(yyruleno==181); -{yygotominor.yy384 = yymsp[-1].minor.yy384;} - break; - case 150: /* using_opt ::= */ - case 180: /* inscollist_opt ::= */ yytestcase(yyruleno==180); -{yygotominor.yy384 = 0;} - break; - case 152: /* orderby_opt ::= ORDER BY sortlist */ - case 160: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==160); - case 239: /* exprlist ::= nexprlist */ yytestcase(yyruleno==239); -{yygotominor.yy322 = yymsp[0].minor.yy322;} - break; - case 153: /* sortlist ::= sortlist COMMA sortitem sortorder */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy322,yymsp[-1].minor.yy314); - if( yygotominor.yy322 ) yygotominor.yy322->a[yygotominor.yy322->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy4; -} - break; - case 154: /* sortlist ::= sortitem sortorder */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy314); - if( yygotominor.yy322 && ALWAYS(yygotominor.yy322->a) ) yygotominor.yy322->a[0].sortOrder = (u8)yymsp[0].minor.yy4; -} - break; - case 156: /* sortorder ::= ASC */ - case 158: /* sortorder ::= */ yytestcase(yyruleno==158); -{yygotominor.yy4 = SQLITE_SO_ASC;} - break; - case 157: /* sortorder ::= DESC */ -{yygotominor.yy4 = SQLITE_SO_DESC;} - break; - case 163: /* limit_opt ::= */ -{yygotominor.yy292.pLimit = 0; yygotominor.yy292.pOffset = 0;} - break; - case 164: /* limit_opt ::= LIMIT expr */ -{yygotominor.yy292.pLimit = yymsp[0].minor.yy118.pExpr; yygotominor.yy292.pOffset = 0;} - break; - case 165: /* limit_opt ::= LIMIT expr OFFSET expr */ -{yygotominor.yy292.pLimit = yymsp[-2].minor.yy118.pExpr; yygotominor.yy292.pOffset = yymsp[0].minor.yy118.pExpr;} - break; - case 166: /* limit_opt ::= LIMIT expr COMMA expr */ -{yygotominor.yy292.pOffset = yymsp[-2].minor.yy118.pExpr; yygotominor.yy292.pLimit = yymsp[0].minor.yy118.pExpr;} - break; - case 167: /* cmd ::= DELETE FROM fullname indexed_opt where_opt */ -{ - sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy259, &yymsp[-1].minor.yy0); - sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy259,yymsp[0].minor.yy314); -} - break; - case 170: /* cmd ::= UPDATE orconf fullname indexed_opt SET setlist where_opt */ -{ - sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy259, &yymsp[-3].minor.yy0); - sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy322,"set list"); - sqlite3Update(pParse,yymsp[-4].minor.yy259,yymsp[-1].minor.yy322,yymsp[0].minor.yy314,yymsp[-5].minor.yy210); -} - break; - case 171: /* setlist ::= setlist COMMA nm EQ expr */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy322, yymsp[0].minor.yy118.pExpr); - sqlite3ExprListSetName(pParse, yygotominor.yy322, &yymsp[-2].minor.yy0, 1); -} - break; - case 172: /* setlist ::= nm EQ expr */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy118.pExpr); - sqlite3ExprListSetName(pParse, yygotominor.yy322, &yymsp[-2].minor.yy0, 1); + return SQLITE_OK; } - break; - case 173: /* cmd ::= insert_cmd INTO fullname inscollist_opt VALUES LP itemlist RP */ -{sqlite3Insert(pParse, yymsp[-5].minor.yy259, yymsp[-1].minor.yy322, 0, yymsp[-4].minor.yy384, yymsp[-7].minor.yy210);} - break; - case 174: /* cmd ::= insert_cmd INTO fullname inscollist_opt select */ -{sqlite3Insert(pParse, yymsp[-2].minor.yy259, 0, yymsp[0].minor.yy387, yymsp[-1].minor.yy384, yymsp[-4].minor.yy210);} - break; - case 175: /* cmd ::= insert_cmd INTO fullname inscollist_opt DEFAULT VALUES */ -{sqlite3Insert(pParse, yymsp[-3].minor.yy259, 0, 0, yymsp[-2].minor.yy384, yymsp[-5].minor.yy210);} - break; - case 176: /* insert_cmd ::= INSERT orconf */ -{yygotominor.yy210 = yymsp[0].minor.yy210;} - break; - case 177: /* insert_cmd ::= REPLACE */ -{yygotominor.yy210 = OE_Replace;} - break; - case 178: /* itemlist ::= itemlist COMMA expr */ - case 241: /* nexprlist ::= nexprlist COMMA expr */ yytestcase(yyruleno==241); -{yygotominor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy322,yymsp[0].minor.yy118.pExpr);} - break; - case 179: /* itemlist ::= expr */ - case 242: /* nexprlist ::= expr */ yytestcase(yyruleno==242); -{yygotominor.yy322 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy118.pExpr);} - break; - case 182: /* inscollist ::= inscollist COMMA nm */ -{yygotominor.yy384 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy384,&yymsp[0].minor.yy0);} - break; - case 183: /* inscollist ::= nm */ -{yygotominor.yy384 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0);} - break; - case 184: /* expr ::= term */ -{yygotominor.yy118 = yymsp[0].minor.yy118;} - break; - case 185: /* expr ::= LP expr RP */ -{yygotominor.yy118.pExpr = yymsp[-1].minor.yy118.pExpr; spanSet(&yygotominor.yy118,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0);} - break; - case 186: /* term ::= NULL */ - case 191: /* term ::= INTEGER|FLOAT|BLOB */ yytestcase(yyruleno==191); - case 192: /* term ::= STRING */ yytestcase(yyruleno==192); -{spanExpr(&yygotominor.yy118, pParse, yymsp[0].major, &yymsp[0].minor.yy0);} - break; - case 187: /* expr ::= id */ - case 188: /* expr ::= JOIN_KW */ yytestcase(yyruleno==188); -{spanExpr(&yygotominor.yy118, pParse, TK_ID, &yymsp[0].minor.yy0);} - break; - case 189: /* expr ::= nm DOT nm */ -{ - Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); - Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0); - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2, 0); - spanSet(&yygotominor.yy118,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); + +/* +** Return the mutex associated with a database connection. +*/ +SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){ + return db->mutex; } - break; - case 190: /* expr ::= nm DOT nm DOT nm */ -{ - Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-4].minor.yy0); - Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); - Expr *temp3 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0); - Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3, 0); - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4, 0); - spanSet(&yygotominor.yy118,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); + +/* +** Free up as much memory as we can from the given database +** connection. +*/ +SQLITE_API int sqlite3_db_release_memory(sqlite3 *db){ + int i; + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + for(i=0; inDb; i++){ + Btree *pBt = db->aDb[i].pBt; + if( pBt ){ + Pager *pPager = sqlite3BtreePager(pBt); + sqlite3PagerShrink(pPager); + } + } + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; } - break; - case 193: /* expr ::= REGISTER */ -{ - /* When doing a nested parse, one can include terms in an expression - ** that look like this: #1 #2 ... These terms refer to registers - ** in the virtual machine. #N is the N-th register. */ - if( pParse->nested==0 ){ - sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &yymsp[0].minor.yy0); - yygotominor.yy118.pExpr = 0; - }else{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, &yymsp[0].minor.yy0); - if( yygotominor.yy118.pExpr ) sqlite3GetInt32(&yymsp[0].minor.yy0.z[1], &yygotominor.yy118.pExpr->iTable); + +/* +** Configuration settings for an individual database connection +*/ +SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){ + va_list ap; + int rc; + va_start(ap, op); + switch( op ){ + case SQLITE_DBCONFIG_LOOKASIDE: { + void *pBuf = va_arg(ap, void*); /* IMP: R-26835-10964 */ + int sz = va_arg(ap, int); /* IMP: R-47871-25994 */ + int cnt = va_arg(ap, int); /* IMP: R-04460-53386 */ + rc = setupLookaside(db, pBuf, sz, cnt); + break; + } + default: { + static const struct { + int op; /* The opcode */ + u32 mask; /* Mask of the bit in sqlite3.flags to set/clear */ + } aFlagOp[] = { + { SQLITE_DBCONFIG_ENABLE_FKEY, SQLITE_ForeignKeys }, + { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger }, + }; + unsigned int i; + rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ + for(i=0; iflags; + if( onoff>0 ){ + db->flags |= aFlagOp[i].mask; + }else if( onoff==0 ){ + db->flags &= ~aFlagOp[i].mask; + } + if( oldFlags!=db->flags ){ + sqlite3ExpirePreparedStatements(db); + } + if( pRes ){ + *pRes = (db->flags & aFlagOp[i].mask)!=0; + } + rc = SQLITE_OK; + break; + } + } + break; + } } - spanSet(&yygotominor.yy118, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); -} - break; - case 194: /* expr ::= VARIABLE */ -{ - spanExpr(&yygotominor.yy118, pParse, TK_VARIABLE, &yymsp[0].minor.yy0); - sqlite3ExprAssignVarNumber(pParse, yygotominor.yy118.pExpr); - spanSet(&yygotominor.yy118, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); -} - break; - case 195: /* expr ::= expr COLLATE ids */ -{ - yygotominor.yy118.pExpr = sqlite3ExprSetCollByToken(pParse, yymsp[-2].minor.yy118.pExpr, &yymsp[0].minor.yy0); - yygotominor.yy118.zStart = yymsp[-2].minor.yy118.zStart; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + va_end(ap); + return rc; } - break; - case 196: /* expr ::= CAST LP expr AS typetoken RP */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_CAST, yymsp[-3].minor.yy118.pExpr, 0, &yymsp[-1].minor.yy0); - spanSet(&yygotominor.yy118,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); + + +/* +** Return true if the buffer z[0..n-1] contains all spaces. +*/ +static int allSpaces(const char *z, int n){ + while( n>0 && z[n-1]==' ' ){ n--; } + return n==0; } - break; - case 197: /* expr ::= ID LP distinct exprlist RP */ -{ - if( yymsp[-1].minor.yy322 && yymsp[-1].minor.yy322->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ - sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0); - } - yygotominor.yy118.pExpr = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy322, &yymsp[-4].minor.yy0); - spanSet(&yygotominor.yy118,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); - if( yymsp[-2].minor.yy4 && yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->flags |= EP_Distinct; + +/* +** This is the default collating function named "BINARY" which is always +** available. +** +** If the padFlag argument is not NULL then space padding at the end +** of strings is ignored. This implements the RTRIM collation. +*/ +static int binCollFunc( + void *padFlag, + int nKey1, const void *pKey1, + int nKey2, const void *pKey2 +){ + int rc, n; + n = nKey1op = TK_CONST_FUNC; + +/* +** Another built-in collating sequence: NOCASE. +** +** This collating sequence is intended to be used for "case independent +** comparison". SQLite's knowledge of upper and lower case equivalents +** extends only to the 26 characters used in the English language. +** +** At the moment there is only a UTF-8 implementation. +*/ +static int nocaseCollatingFunc( + void *NotUsed, + int nKey1, const void *pKey1, + int nKey2, const void *pKey2 +){ + int r = sqlite3StrNICmp( + (const char *)pKey1, (const char *)pKey2, (nKey1flags |= EP_InfixFunc; + +/* +** Return the ROWID of the most recent insert +*/ +SQLITE_API sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){ + return db->lastRowid; } - break; - case 213: /* expr ::= expr likeop expr ESCAPE expr */ -{ - ExprList *pList; - pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy118.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy118.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy118.pExpr); - yygotominor.yy118.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy342.eOperator); - if( yymsp[-3].minor.yy342.not ) yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy118.pExpr, 0, 0); - yygotominor.yy118.zStart = yymsp[-4].minor.yy118.zStart; - yygotominor.yy118.zEnd = yymsp[0].minor.yy118.zEnd; - if( yygotominor.yy118.pExpr ) yygotominor.yy118.pExpr->flags |= EP_InfixFunc; + +/* +** Return the number of changes in the most recent call to sqlite3_exec(). +*/ +SQLITE_API int sqlite3_changes(sqlite3 *db){ + return db->nChange; } - break; - case 214: /* expr ::= expr ISNULL|NOTNULL */ -{spanUnaryPostfix(&yygotominor.yy118,pParse,yymsp[0].major,&yymsp[-1].minor.yy118,&yymsp[0].minor.yy0);} - break; - case 215: /* expr ::= expr NOT NULL */ -{spanUnaryPostfix(&yygotominor.yy118,pParse,TK_NOTNULL,&yymsp[-2].minor.yy118,&yymsp[0].minor.yy0);} - break; - case 216: /* expr ::= expr IS expr */ -{ - spanBinaryExpr(&yygotominor.yy118,pParse,TK_IS,&yymsp[-2].minor.yy118,&yymsp[0].minor.yy118); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy118.pExpr, yygotominor.yy118.pExpr, TK_ISNULL); + +/* +** Return the number of changes since the database handle was opened. +*/ +SQLITE_API int sqlite3_total_changes(sqlite3 *db){ + return db->nTotalChange; } - break; - case 217: /* expr ::= expr IS NOT expr */ -{ - spanBinaryExpr(&yygotominor.yy118,pParse,TK_ISNOT,&yymsp[-3].minor.yy118,&yymsp[0].minor.yy118); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy118.pExpr, yygotominor.yy118.pExpr, TK_NOTNULL); + +/* +** Close all open savepoints. This function only manipulates fields of the +** database handle object, it does not close any savepoints that may be open +** at the b-tree/pager level. +*/ +SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *db){ + while( db->pSavepoint ){ + Savepoint *pTmp = db->pSavepoint; + db->pSavepoint = pTmp->pNext; + sqlite3DbFree(db, pTmp); + } + db->nSavepoint = 0; + db->nStatement = 0; + db->isTransactionSavepoint = 0; } - break; - case 218: /* expr ::= NOT expr */ - case 219: /* expr ::= BITNOT expr */ yytestcase(yyruleno==219); -{spanUnaryPrefix(&yygotominor.yy118,pParse,yymsp[-1].major,&yymsp[0].minor.yy118,&yymsp[-1].minor.yy0);} - break; - case 220: /* expr ::= MINUS expr */ -{spanUnaryPrefix(&yygotominor.yy118,pParse,TK_UMINUS,&yymsp[0].minor.yy118,&yymsp[-1].minor.yy0);} - break; - case 221: /* expr ::= PLUS expr */ -{spanUnaryPrefix(&yygotominor.yy118,pParse,TK_UPLUS,&yymsp[0].minor.yy118,&yymsp[-1].minor.yy0);} - break; - case 224: /* expr ::= expr between_op expr AND expr */ -{ - ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy118.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy118.pExpr); - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy118.pExpr, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pList = pList; - }else{ - sqlite3ExprListDelete(pParse->db, pList); - } - if( yymsp[-3].minor.yy4 ) yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy118.pExpr, 0, 0); - yygotominor.yy118.zStart = yymsp[-4].minor.yy118.zStart; - yygotominor.yy118.zEnd = yymsp[0].minor.yy118.zEnd; + +/* +** Invoke the destructor function associated with FuncDef p, if any. Except, +** if this is not the last copy of the function, do not invoke it. Multiple +** copies of a single function are created when create_function() is called +** with SQLITE_ANY as the encoding. +*/ +static void functionDestroy(sqlite3 *db, FuncDef *p){ + FuncDestructor *pDestructor = p->pDestructor; + if( pDestructor ){ + pDestructor->nRef--; + if( pDestructor->nRef==0 ){ + pDestructor->xDestroy(pDestructor->pUserData); + sqlite3DbFree(db, pDestructor); + } + } } - break; - case 227: /* expr ::= expr in_op LP exprlist RP */ -{ - if( yymsp[-1].minor.yy322==0 ){ - /* Expressions of the form - ** - ** expr1 IN () - ** expr1 NOT IN () - ** - ** simplify to constants 0 (false) and 1 (true), respectively, - ** regardless of the value of expr1. - */ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy4]); - sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy118.pExpr); - }else{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy118.pExpr, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pList = yymsp[-1].minor.yy322; - sqlite3ExprSetHeight(pParse, yygotominor.yy118.pExpr); - }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy322); + +/* +** Disconnect all sqlite3_vtab objects that belong to database connection +** db. This is called when db is being closed. +*/ +static void disconnectAllVtab(sqlite3 *db){ +#ifndef SQLITE_OMIT_VIRTUALTABLE + int i; + sqlite3BtreeEnterAll(db); + for(i=0; inDb; i++){ + Schema *pSchema = db->aDb[i].pSchema; + if( db->aDb[i].pSchema ){ + HashElem *p; + for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){ + Table *pTab = (Table *)sqliteHashData(p); + if( IsVirtual(pTab) ) sqlite3VtabDisconnect(db, pTab); } - if( yymsp[-3].minor.yy4 ) yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy118.pExpr, 0, 0); } - yygotominor.yy118.zStart = yymsp[-4].minor.yy118.zStart; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; } - break; - case 228: /* expr ::= LP select RP */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pSelect = yymsp[-1].minor.yy387; - ExprSetProperty(yygotominor.yy118.pExpr, EP_xIsSelect); - sqlite3ExprSetHeight(pParse, yygotominor.yy118.pExpr); - }else{ - sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy387); - } - yygotominor.yy118.zStart = yymsp[-2].minor.yy0.z; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + sqlite3VtabUnlockList(db); + sqlite3BtreeLeaveAll(db); +#else + UNUSED_PARAMETER(db); +#endif +} + +/* +** Return TRUE if database connection db has unfinalized prepared +** statements or unfinished sqlite3_backup objects. +*/ +static int connectionIsBusy(sqlite3 *db){ + int j; + assert( sqlite3_mutex_held(db->mutex) ); + if( db->pVdbe ) return 1; + for(j=0; jnDb; j++){ + Btree *pBt = db->aDb[j].pBt; + if( pBt && sqlite3BtreeIsInBackup(pBt) ) return 1; } - break; - case 229: /* expr ::= expr in_op LP select RP */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy118.pExpr, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pSelect = yymsp[-1].minor.yy387; - ExprSetProperty(yygotominor.yy118.pExpr, EP_xIsSelect); - sqlite3ExprSetHeight(pParse, yygotominor.yy118.pExpr); - }else{ - sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy387); - } - if( yymsp[-3].minor.yy4 ) yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy118.pExpr, 0, 0); - yygotominor.yy118.zStart = yymsp[-4].minor.yy118.zStart; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + return 0; +} + +/* +** Close an existing SQLite database +*/ +static int sqlite3Close(sqlite3 *db, int forceZombie){ + if( !db ){ + /* EVIDENCE-OF: R-63257-11740 Calling sqlite3_close() or + ** sqlite3_close_v2() with a NULL pointer argument is a harmless no-op. */ + return SQLITE_OK; } - break; - case 230: /* expr ::= expr in_op nm dbnm */ -{ - SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0); - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-3].minor.yy118.pExpr, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0); - ExprSetProperty(yygotominor.yy118.pExpr, EP_xIsSelect); - sqlite3ExprSetHeight(pParse, yygotominor.yy118.pExpr); - }else{ - sqlite3SrcListDelete(pParse->db, pSrc); - } - if( yymsp[-2].minor.yy4 ) yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy118.pExpr, 0, 0); - yygotominor.yy118.zStart = yymsp[-3].minor.yy118.zStart; - yygotominor.yy118.zEnd = yymsp[0].minor.yy0.z ? &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] : &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n]; + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; } - break; - case 231: /* expr ::= EXISTS LP select RP */ -{ - Expr *p = yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0, 0); - if( p ){ - p->x.pSelect = yymsp[-1].minor.yy387; - ExprSetProperty(p, EP_xIsSelect); - sqlite3ExprSetHeight(pParse, p); - }else{ - sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy387); - } - yygotominor.yy118.zStart = yymsp[-3].minor.yy0.z; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + sqlite3_mutex_enter(db->mutex); + + /* Force xDisconnect calls on all virtual tables */ + disconnectAllVtab(db); + + /* If a transaction is open, the disconnectAllVtab() call above + ** will not have called the xDisconnect() method on any virtual + ** tables in the db->aVTrans[] array. The following sqlite3VtabRollback() + ** call will do so. We need to do this before the check for active + ** SQL statements below, as the v-table implementation may be storing + ** some prepared statements internally. + */ + sqlite3VtabRollback(db); + + /* Legacy behavior (sqlite3_close() behavior) is to return + ** SQLITE_BUSY if the connection can not be closed immediately. + */ + if( !forceZombie && connectionIsBusy(db) ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to close due to unfinalized " + "statements or unfinished backups"); + sqlite3_mutex_leave(db->mutex); + return SQLITE_BUSY; } - break; - case 232: /* expr ::= CASE case_operand case_exprlist case_else END */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy314, yymsp[-1].minor.yy314, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->x.pList = yymsp[-2].minor.yy322; - sqlite3ExprSetHeight(pParse, yygotominor.yy118.pExpr); - }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy322); + +#ifdef SQLITE_ENABLE_SQLLOG + if( sqlite3GlobalConfig.xSqllog ){ + /* Closing the handle. Fourth parameter is passed the value 2. */ + sqlite3GlobalConfig.xSqllog(sqlite3GlobalConfig.pSqllogArg, db, 0, 2); } - yygotominor.yy118.zStart = yymsp[-4].minor.yy0.z; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; -} - break; - case 233: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy322, yymsp[-2].minor.yy118.pExpr); - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yygotominor.yy322, yymsp[0].minor.yy118.pExpr); -} - break; - case 234: /* case_exprlist ::= WHEN expr THEN expr */ -{ - yygotominor.yy322 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy118.pExpr); - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yygotominor.yy322, yymsp[0].minor.yy118.pExpr); -} - break; - case 243: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP idxlist RP */ -{ - sqlite3CreateIndex(pParse, &yymsp[-6].minor.yy0, &yymsp[-5].minor.yy0, - sqlite3SrcListAppend(pParse->db,0,&yymsp[-3].minor.yy0,0), yymsp[-1].minor.yy322, yymsp[-9].minor.yy4, - &yymsp[-10].minor.yy0, &yymsp[0].minor.yy0, SQLITE_SO_ASC, yymsp[-7].minor.yy4); +#endif + + /* Convert the connection into a zombie and then close it. + */ + db->magic = SQLITE_MAGIC_ZOMBIE; + sqlite3LeaveMutexAndCloseZombie(db); + return SQLITE_OK; } - break; - case 244: /* uniqueflag ::= UNIQUE */ - case 298: /* raisetype ::= ABORT */ yytestcase(yyruleno==298); -{yygotominor.yy4 = OE_Abort;} - break; - case 245: /* uniqueflag ::= */ -{yygotominor.yy4 = OE_None;} - break; - case 248: /* idxlist ::= idxlist COMMA nm collate sortorder */ -{ - Expr *p = 0; - if( yymsp[-1].minor.yy0.n>0 ){ - p = sqlite3Expr(pParse->db, TK_COLUMN, 0); - sqlite3ExprSetCollByToken(pParse, p, &yymsp[-1].minor.yy0); + +/* +** Two variations on the public interface for closing a database +** connection. The sqlite3_close() version returns SQLITE_BUSY and +** leaves the connection option if there are unfinalized prepared +** statements or unfinished sqlite3_backups. The sqlite3_close_v2() +** version forces the connection to become a zombie if there are +** unclosed resources, and arranges for deallocation when the last +** prepare statement or sqlite3_backup closes. +*/ +SQLITE_API int sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); } +SQLITE_API int sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); } + + +/* +** Close the mutex on database connection db. +** +** Furthermore, if database connection db is a zombie (meaning that there +** has been a prior call to sqlite3_close(db) or sqlite3_close_v2(db)) and +** every sqlite3_stmt has now been finalized and every sqlite3_backup has +** finished, then free all resources. +*/ +SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3 *db){ + HashElem *i; /* Hash table iterator */ + int j; + + /* If there are outstanding sqlite3_stmt or sqlite3_backup objects + ** or if the connection has not yet been closed by sqlite3_close_v2(), + ** then just leave the mutex and return. + */ + if( db->magic!=SQLITE_MAGIC_ZOMBIE || connectionIsBusy(db) ){ + sqlite3_mutex_leave(db->mutex); + return; } - yygotominor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy322, p); - sqlite3ExprListSetName(pParse,yygotominor.yy322,&yymsp[-2].minor.yy0,1); - sqlite3ExprListCheckLength(pParse, yygotominor.yy322, "index"); - if( yygotominor.yy322 ) yygotominor.yy322->a[yygotominor.yy322->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy4; -} - break; - case 249: /* idxlist ::= nm collate sortorder */ -{ - Expr *p = 0; - if( yymsp[-1].minor.yy0.n>0 ){ - p = sqlite3PExpr(pParse, TK_COLUMN, 0, 0, 0); - sqlite3ExprSetCollByToken(pParse, p, &yymsp[-1].minor.yy0); + + /* If we reach this point, it means that the database connection has + ** closed all sqlite3_stmt and sqlite3_backup objects and has been + ** passed to sqlite3_close (meaning that it is a zombie). Therefore, + ** go ahead and free all resources. + */ + + /* If a transaction is open, roll it back. This also ensures that if + ** any database schemas have been modified by an uncommitted transaction + ** they are reset. And that the required b-tree mutex is held to make + ** the pager rollback and schema reset an atomic operation. */ + sqlite3RollbackAll(db, SQLITE_OK); + + /* Free any outstanding Savepoint structures. */ + sqlite3CloseSavepoints(db); + + /* Close all database connections */ + for(j=0; jnDb; j++){ + struct Db *pDb = &db->aDb[j]; + if( pDb->pBt ){ + if( pDb->pSchema ){ + /* Must clear the KeyInfo cache. See ticket [e4a18565a36884b00edf] */ + sqlite3BtreeEnter(pDb->pBt); + for(i=sqliteHashFirst(&pDb->pSchema->idxHash); i; i=sqliteHashNext(i)){ + Index *pIdx = sqliteHashData(i); + sqlite3KeyInfoUnref(pIdx->pKeyInfo); + pIdx->pKeyInfo = 0; + } + sqlite3BtreeLeave(pDb->pBt); + } + sqlite3BtreeClose(pDb->pBt); + pDb->pBt = 0; + if( j!=1 ){ + pDb->pSchema = 0; + } + } } - yygotominor.yy322 = sqlite3ExprListAppend(pParse,0, p); - sqlite3ExprListSetName(pParse, yygotominor.yy322, &yymsp[-2].minor.yy0, 1); - sqlite3ExprListCheckLength(pParse, yygotominor.yy322, "index"); - if( yygotominor.yy322 ) yygotominor.yy322->a[yygotominor.yy322->nExpr-1].sortOrder = (u8)yymsp[0].minor.yy4; -} - break; - case 250: /* collate ::= */ -{yygotominor.yy0.z = 0; yygotominor.yy0.n = 0;} - break; - case 252: /* cmd ::= DROP INDEX ifexists fullname */ -{sqlite3DropIndex(pParse, yymsp[0].minor.yy259, yymsp[-1].minor.yy4);} - break; - case 253: /* cmd ::= VACUUM */ - case 254: /* cmd ::= VACUUM nm */ yytestcase(yyruleno==254); -{sqlite3Vacuum(pParse);} - break; - case 255: /* cmd ::= PRAGMA nm dbnm */ -{sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);} - break; - case 256: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ -{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);} - break; - case 257: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ -{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);} - break; - case 258: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ -{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);} - break; - case 259: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ -{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);} - break; - case 270: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ -{ - Token all; - all.z = yymsp[-3].minor.yy0.z; - all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n; - sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy203, &all); -} - break; - case 271: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ -{ - sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy4, yymsp[-4].minor.yy90.a, yymsp[-4].minor.yy90.b, yymsp[-2].minor.yy259, yymsp[0].minor.yy314, yymsp[-10].minor.yy4, yymsp[-8].minor.yy4); - yygotominor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); -} - break; - case 272: /* trigger_time ::= BEFORE */ - case 275: /* trigger_time ::= */ yytestcase(yyruleno==275); -{ yygotominor.yy4 = TK_BEFORE; } - break; - case 273: /* trigger_time ::= AFTER */ -{ yygotominor.yy4 = TK_AFTER; } - break; - case 274: /* trigger_time ::= INSTEAD OF */ -{ yygotominor.yy4 = TK_INSTEAD;} - break; - case 276: /* trigger_event ::= DELETE|INSERT */ - case 277: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==277); -{yygotominor.yy90.a = yymsp[0].major; yygotominor.yy90.b = 0;} - break; - case 278: /* trigger_event ::= UPDATE OF inscollist */ -{yygotominor.yy90.a = TK_UPDATE; yygotominor.yy90.b = yymsp[0].minor.yy384;} - break; - case 281: /* when_clause ::= */ - case 303: /* key_opt ::= */ yytestcase(yyruleno==303); -{ yygotominor.yy314 = 0; } - break; - case 282: /* when_clause ::= WHEN expr */ - case 304: /* key_opt ::= KEY expr */ yytestcase(yyruleno==304); -{ yygotominor.yy314 = yymsp[0].minor.yy118.pExpr; } - break; - case 283: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ -{ - assert( yymsp[-2].minor.yy203!=0 ); - yymsp[-2].minor.yy203->pLast->pNext = yymsp[-1].minor.yy203; - yymsp[-2].minor.yy203->pLast = yymsp[-1].minor.yy203; - yygotominor.yy203 = yymsp[-2].minor.yy203; -} - break; - case 284: /* trigger_cmd_list ::= trigger_cmd SEMI */ -{ - assert( yymsp[-1].minor.yy203!=0 ); - yymsp[-1].minor.yy203->pLast = yymsp[-1].minor.yy203; - yygotominor.yy203 = yymsp[-1].minor.yy203; -} - break; - case 286: /* trnm ::= nm DOT nm */ -{ - yygotominor.yy0 = yymsp[0].minor.yy0; - sqlite3ErrorMsg(pParse, - "qualified table names are not allowed on INSERT, UPDATE, and DELETE " - "statements within triggers"); -} - break; - case 288: /* tridxby ::= INDEXED BY nm */ -{ - sqlite3ErrorMsg(pParse, - "the INDEXED BY clause is not allowed on UPDATE or DELETE statements " - "within triggers"); -} - break; - case 289: /* tridxby ::= NOT INDEXED */ -{ - sqlite3ErrorMsg(pParse, - "the NOT INDEXED clause is not allowed on UPDATE or DELETE statements " - "within triggers"); -} - break; - case 290: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */ -{ yygotominor.yy203 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy322, yymsp[0].minor.yy314, yymsp[-5].minor.yy210); } - break; - case 291: /* trigger_cmd ::= insert_cmd INTO trnm inscollist_opt VALUES LP itemlist RP */ -{yygotominor.yy203 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy384, yymsp[-1].minor.yy322, 0, yymsp[-7].minor.yy210);} - break; - case 292: /* trigger_cmd ::= insert_cmd INTO trnm inscollist_opt select */ -{yygotominor.yy203 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy384, 0, yymsp[0].minor.yy387, yymsp[-4].minor.yy210);} - break; - case 293: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */ -{yygotominor.yy203 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy314);} - break; - case 294: /* trigger_cmd ::= select */ -{yygotominor.yy203 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy387); } - break; - case 295: /* expr ::= RAISE LP IGNORE RP */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, 0); - if( yygotominor.yy118.pExpr ){ - yygotominor.yy118.pExpr->affinity = OE_Ignore; + /* Clear the TEMP schema separately and last */ + if( db->aDb[1].pSchema ){ + sqlite3SchemaClear(db->aDb[1].pSchema); } - yygotominor.yy118.zStart = yymsp[-3].minor.yy0.z; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; -} - break; - case 296: /* expr ::= RAISE LP raisetype COMMA nm RP */ -{ - yygotominor.yy118.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, &yymsp[-1].minor.yy0); - if( yygotominor.yy118.pExpr ) { - yygotominor.yy118.pExpr->affinity = (char)yymsp[-3].minor.yy4; + sqlite3VtabUnlockList(db); + + /* Free up the array of auxiliary databases */ + sqlite3CollapseDatabaseArray(db); + assert( db->nDb<=2 ); + assert( db->aDb==db->aDbStatic ); + + /* Tell the code in notify.c that the connection no longer holds any + ** locks and does not require any further unlock-notify callbacks. + */ + sqlite3ConnectionClosed(db); + + for(j=0; jaFunc.a); j++){ + FuncDef *pNext, *pHash, *p; + for(p=db->aFunc.a[j]; p; p=pHash){ + pHash = p->pHash; + while( p ){ + functionDestroy(db, p); + pNext = p->pNext; + sqlite3DbFree(db, p); + p = pNext; + } + } } - yygotominor.yy118.zStart = yymsp[-5].minor.yy0.z; - yygotominor.yy118.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; -} - break; - case 297: /* raisetype ::= ROLLBACK */ -{yygotominor.yy4 = OE_Rollback;} - break; - case 299: /* raisetype ::= FAIL */ -{yygotominor.yy4 = OE_Fail;} - break; - case 300: /* cmd ::= DROP TRIGGER ifexists fullname */ -{ - sqlite3DropTrigger(pParse,yymsp[0].minor.yy259,yymsp[-1].minor.yy4); -} - break; - case 301: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ -{ - sqlite3Attach(pParse, yymsp[-3].minor.yy118.pExpr, yymsp[-1].minor.yy118.pExpr, yymsp[0].minor.yy314); -} - break; - case 302: /* cmd ::= DETACH database_kw_opt expr */ -{ - sqlite3Detach(pParse, yymsp[0].minor.yy118.pExpr); -} - break; - case 307: /* cmd ::= REINDEX */ -{sqlite3Reindex(pParse, 0, 0);} - break; - case 308: /* cmd ::= REINDEX nm dbnm */ -{sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} - break; - case 309: /* cmd ::= ANALYZE */ -{sqlite3Analyze(pParse, 0, 0);} - break; - case 310: /* cmd ::= ANALYZE nm dbnm */ -{sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} - break; - case 311: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ -{ - sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy259,&yymsp[0].minor.yy0); -} - break; - case 312: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column */ -{ - sqlite3AlterFinishAddColumn(pParse, &yymsp[0].minor.yy0); -} - break; - case 313: /* add_column_fullname ::= fullname */ -{ - pParse->db->lookaside.bEnabled = 0; - sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy259); -} - break; - case 316: /* cmd ::= create_vtab */ -{sqlite3VtabFinishParse(pParse,0);} - break; - case 317: /* cmd ::= create_vtab LP vtabarglist RP */ -{sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);} - break; - case 318: /* create_vtab ::= createkw VIRTUAL TABLE nm dbnm USING nm */ -{ - sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0); -} - break; - case 321: /* vtabarg ::= */ -{sqlite3VtabArgInit(pParse);} - break; - case 323: /* vtabargtoken ::= ANY */ - case 324: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==324); - case 325: /* lp ::= LP */ yytestcase(yyruleno==325); -{sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);} - break; - default: - /* (0) input ::= cmdlist */ yytestcase(yyruleno==0); - /* (1) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==1); - /* (2) cmdlist ::= ecmd */ yytestcase(yyruleno==2); - /* (3) ecmd ::= SEMI */ yytestcase(yyruleno==3); - /* (4) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==4); - /* (10) trans_opt ::= */ yytestcase(yyruleno==10); - /* (11) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==11); - /* (12) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==12); - /* (20) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==20); - /* (21) savepoint_opt ::= */ yytestcase(yyruleno==21); - /* (25) cmd ::= create_table create_table_args */ yytestcase(yyruleno==25); - /* (34) columnlist ::= columnlist COMMA column */ yytestcase(yyruleno==34); - /* (35) columnlist ::= column */ yytestcase(yyruleno==35); - /* (44) type ::= */ yytestcase(yyruleno==44); - /* (51) signed ::= plus_num */ yytestcase(yyruleno==51); - /* (52) signed ::= minus_num */ yytestcase(yyruleno==52); - /* (53) carglist ::= carglist carg */ yytestcase(yyruleno==53); - /* (54) carglist ::= */ yytestcase(yyruleno==54); - /* (55) carg ::= CONSTRAINT nm ccons */ yytestcase(yyruleno==55); - /* (56) carg ::= ccons */ yytestcase(yyruleno==56); - /* (62) ccons ::= NULL onconf */ yytestcase(yyruleno==62); - /* (90) conslist ::= conslist COMMA tcons */ yytestcase(yyruleno==90); - /* (91) conslist ::= conslist tcons */ yytestcase(yyruleno==91); - /* (92) conslist ::= tcons */ yytestcase(yyruleno==92); - /* (93) tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==93); - /* (268) plus_opt ::= PLUS */ yytestcase(yyruleno==268); - /* (269) plus_opt ::= */ yytestcase(yyruleno==269); - /* (279) foreach_clause ::= */ yytestcase(yyruleno==279); - /* (280) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==280); - /* (287) tridxby ::= */ yytestcase(yyruleno==287); - /* (305) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==305); - /* (306) database_kw_opt ::= */ yytestcase(yyruleno==306); - /* (314) kwcolumn_opt ::= */ yytestcase(yyruleno==314); - /* (315) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==315); - /* (319) vtabarglist ::= vtabarg */ yytestcase(yyruleno==319); - /* (320) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==320); - /* (322) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==322); - /* (326) anylist ::= */ yytestcase(yyruleno==326); - /* (327) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==327); - /* (328) anylist ::= anylist ANY */ yytestcase(yyruleno==328); - break; - }; - yygoto = yyRuleInfo[yyruleno].lhs; - yysize = yyRuleInfo[yyruleno].nrhs; - yypParser->yyidx -= yysize; - yyact = yy_find_reduce_action(yymsp[-yysize].stateno,(YYCODETYPE)yygoto); - if( yyact < YYNSTATE ){ -#ifdef NDEBUG - /* If we are not debugging and the reduce action popped at least - ** one element off the stack, then we can push the new element back - ** onto the stack here, and skip the stack overflow test in yy_shift(). - ** That gives a significant speed improvement. */ - if( yysize ){ - yypParser->yyidx++; - yymsp -= yysize-1; - yymsp->stateno = (YYACTIONTYPE)yyact; - yymsp->major = (YYCODETYPE)yygoto; - yymsp->minor = yygotominor; - }else -#endif - { - yy_shift(yypParser,yyact,yygoto,&yygotominor); + for(i=sqliteHashFirst(&db->aCollSeq); i; i=sqliteHashNext(i)){ + CollSeq *pColl = (CollSeq *)sqliteHashData(i); + /* Invoke any destructors registered for collation sequence user data. */ + for(j=0; j<3; j++){ + if( pColl[j].xDel ){ + pColl[j].xDel(pColl[j].pUser); + } } - }else{ - assert( yyact == YYNSTATE + YYNRULE + 1 ); - yy_accept(yypParser); + sqlite3DbFree(db, pColl); + } + sqlite3HashClear(&db->aCollSeq); +#ifndef SQLITE_OMIT_VIRTUALTABLE + for(i=sqliteHashFirst(&db->aModule); i; i=sqliteHashNext(i)){ + Module *pMod = (Module *)sqliteHashData(i); + if( pMod->xDestroy ){ + pMod->xDestroy(pMod->pAux); + } + sqlite3DbFree(db, pMod); + } + sqlite3HashClear(&db->aModule); +#endif + + sqlite3Error(db, SQLITE_OK); /* Deallocates any cached error strings. */ + sqlite3ValueFree(db->pErr); + sqlite3CloseExtensions(db); +#if SQLITE_USER_AUTHENTICATION + sqlite3_free(db->auth.zAuthUser); + sqlite3_free(db->auth.zAuthPW); +#endif + + db->magic = SQLITE_MAGIC_ERROR; + + /* The temp-database schema is allocated differently from the other schema + ** objects (using sqliteMalloc() directly, instead of sqlite3BtreeSchema()). + ** So it needs to be freed here. Todo: Why not roll the temp schema into + ** the same sqliteMalloc() as the one that allocates the database + ** structure? + */ + sqlite3DbFree(db, db->aDb[1].pSchema); + sqlite3_mutex_leave(db->mutex); + db->magic = SQLITE_MAGIC_CLOSED; + sqlite3_mutex_free(db->mutex); + assert( db->lookaside.nOut==0 ); /* Fails on a lookaside memory leak */ + if( db->lookaside.bMalloced ){ + sqlite3_free(db->lookaside.pStart); } + sqlite3_free(db); } /* -** The following code executes when the parse fails +** Rollback all database files. If tripCode is not SQLITE_OK, then +** any write cursors are invalidated ("tripped" - as in "tripping a circuit +** breaker") and made to return tripCode if there are any further +** attempts to use that cursor. Read cursors remain open and valid +** but are "saved" in case the table pages are moved around. */ -#ifndef YYNOERRORRECOVERY -static void yy_parse_failed( - yyParser *yypParser /* The parser */ -){ - sqlite3ParserARG_FETCH; -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt); +SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db, int tripCode){ + int i; + int inTrans = 0; + int schemaChange; + assert( sqlite3_mutex_held(db->mutex) ); + sqlite3BeginBenignMalloc(); + + /* Obtain all b-tree mutexes before making any calls to BtreeRollback(). + ** This is important in case the transaction being rolled back has + ** modified the database schema. If the b-tree mutexes are not taken + ** here, then another shared-cache connection might sneak in between + ** the database rollback and schema reset, which can cause false + ** corruption reports in some cases. */ + sqlite3BtreeEnterAll(db); + schemaChange = (db->flags & SQLITE_InternChanges)!=0 && db->init.busy==0; + + for(i=0; inDb; i++){ + Btree *p = db->aDb[i].pBt; + if( p ){ + if( sqlite3BtreeIsInTrans(p) ){ + inTrans = 1; + } + sqlite3BtreeRollback(p, tripCode, !schemaChange); + } + } + sqlite3VtabRollback(db); + sqlite3EndBenignMalloc(); + + if( (db->flags&SQLITE_InternChanges)!=0 && db->init.busy==0 ){ + sqlite3ExpirePreparedStatements(db); + sqlite3ResetAllSchemasOfConnection(db); + } + sqlite3BtreeLeaveAll(db); + + /* Any deferred constraint violations have now been resolved. */ + db->nDeferredCons = 0; + db->nDeferredImmCons = 0; + db->flags &= ~SQLITE_DeferFKs; + + /* If one has been configured, invoke the rollback-hook callback */ + if( db->xRollbackCallback && (inTrans || !db->autoCommit) ){ + db->xRollbackCallback(db->pRollbackArg); } -#endif - while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser); - /* Here code is inserted which will be executed whenever the - ** parser fails */ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ } -#endif /* YYNOERRORRECOVERY */ /* -** The following code executes when a syntax error first occurs. -*/ -static void yy_syntax_error( - yyParser *yypParser, /* The parser */ - int yymajor, /* The major type of the error token */ - YYMINORTYPE yyminor /* The minor type of the error token */ -){ - sqlite3ParserARG_FETCH; -#define TOKEN (yyminor.yy0) - - UNUSED_PARAMETER(yymajor); /* Silence some compiler warnings */ - assert( TOKEN.z[0] ); /* The tokenizer always gives us a token */ - sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); - pParse->parseError = 1; - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ +** Return a static string containing the name corresponding to the error code +** specified in the argument. +*/ +#if (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) || defined(SQLITE_TEST) +SQLITE_PRIVATE const char *sqlite3ErrName(int rc){ + const char *zName = 0; + int i, origRc = rc; + for(i=0; i<2 && zName==0; i++, rc &= 0xff){ + switch( rc ){ + case SQLITE_OK: zName = "SQLITE_OK"; break; + case SQLITE_ERROR: zName = "SQLITE_ERROR"; break; + case SQLITE_INTERNAL: zName = "SQLITE_INTERNAL"; break; + case SQLITE_PERM: zName = "SQLITE_PERM"; break; + case SQLITE_ABORT: zName = "SQLITE_ABORT"; break; + case SQLITE_ABORT_ROLLBACK: zName = "SQLITE_ABORT_ROLLBACK"; break; + case SQLITE_BUSY: zName = "SQLITE_BUSY"; break; + case SQLITE_BUSY_RECOVERY: zName = "SQLITE_BUSY_RECOVERY"; break; + case SQLITE_BUSY_SNAPSHOT: zName = "SQLITE_BUSY_SNAPSHOT"; break; + case SQLITE_LOCKED: zName = "SQLITE_LOCKED"; break; + case SQLITE_LOCKED_SHAREDCACHE: zName = "SQLITE_LOCKED_SHAREDCACHE";break; + case SQLITE_NOMEM: zName = "SQLITE_NOMEM"; break; + case SQLITE_READONLY: zName = "SQLITE_READONLY"; break; + case SQLITE_READONLY_RECOVERY: zName = "SQLITE_READONLY_RECOVERY"; break; + case SQLITE_READONLY_CANTLOCK: zName = "SQLITE_READONLY_CANTLOCK"; break; + case SQLITE_READONLY_ROLLBACK: zName = "SQLITE_READONLY_ROLLBACK"; break; + case SQLITE_READONLY_DBMOVED: zName = "SQLITE_READONLY_DBMOVED"; break; + case SQLITE_INTERRUPT: zName = "SQLITE_INTERRUPT"; break; + case SQLITE_IOERR: zName = "SQLITE_IOERR"; break; + case SQLITE_IOERR_READ: zName = "SQLITE_IOERR_READ"; break; + case SQLITE_IOERR_SHORT_READ: zName = "SQLITE_IOERR_SHORT_READ"; break; + case SQLITE_IOERR_WRITE: zName = "SQLITE_IOERR_WRITE"; break; + case SQLITE_IOERR_FSYNC: zName = "SQLITE_IOERR_FSYNC"; break; + case SQLITE_IOERR_DIR_FSYNC: zName = "SQLITE_IOERR_DIR_FSYNC"; break; + case SQLITE_IOERR_TRUNCATE: zName = "SQLITE_IOERR_TRUNCATE"; break; + case SQLITE_IOERR_FSTAT: zName = "SQLITE_IOERR_FSTAT"; break; + case SQLITE_IOERR_UNLOCK: zName = "SQLITE_IOERR_UNLOCK"; break; + case SQLITE_IOERR_RDLOCK: zName = "SQLITE_IOERR_RDLOCK"; break; + case SQLITE_IOERR_DELETE: zName = "SQLITE_IOERR_DELETE"; break; + case SQLITE_IOERR_NOMEM: zName = "SQLITE_IOERR_NOMEM"; break; + case SQLITE_IOERR_ACCESS: zName = "SQLITE_IOERR_ACCESS"; break; + case SQLITE_IOERR_CHECKRESERVEDLOCK: + zName = "SQLITE_IOERR_CHECKRESERVEDLOCK"; break; + case SQLITE_IOERR_LOCK: zName = "SQLITE_IOERR_LOCK"; break; + case SQLITE_IOERR_CLOSE: zName = "SQLITE_IOERR_CLOSE"; break; + case SQLITE_IOERR_DIR_CLOSE: zName = "SQLITE_IOERR_DIR_CLOSE"; break; + case SQLITE_IOERR_SHMOPEN: zName = "SQLITE_IOERR_SHMOPEN"; break; + case SQLITE_IOERR_SHMSIZE: zName = "SQLITE_IOERR_SHMSIZE"; break; + case SQLITE_IOERR_SHMLOCK: zName = "SQLITE_IOERR_SHMLOCK"; break; + case SQLITE_IOERR_SHMMAP: zName = "SQLITE_IOERR_SHMMAP"; break; + case SQLITE_IOERR_SEEK: zName = "SQLITE_IOERR_SEEK"; break; + case SQLITE_IOERR_DELETE_NOENT: zName = "SQLITE_IOERR_DELETE_NOENT";break; + case SQLITE_IOERR_MMAP: zName = "SQLITE_IOERR_MMAP"; break; + case SQLITE_IOERR_GETTEMPPATH: zName = "SQLITE_IOERR_GETTEMPPATH"; break; + case SQLITE_IOERR_CONVPATH: zName = "SQLITE_IOERR_CONVPATH"; break; + case SQLITE_CORRUPT: zName = "SQLITE_CORRUPT"; break; + case SQLITE_CORRUPT_VTAB: zName = "SQLITE_CORRUPT_VTAB"; break; + case SQLITE_NOTFOUND: zName = "SQLITE_NOTFOUND"; break; + case SQLITE_FULL: zName = "SQLITE_FULL"; break; + case SQLITE_CANTOPEN: zName = "SQLITE_CANTOPEN"; break; + case SQLITE_CANTOPEN_NOTEMPDIR: zName = "SQLITE_CANTOPEN_NOTEMPDIR";break; + case SQLITE_CANTOPEN_ISDIR: zName = "SQLITE_CANTOPEN_ISDIR"; break; + case SQLITE_CANTOPEN_FULLPATH: zName = "SQLITE_CANTOPEN_FULLPATH"; break; + case SQLITE_CANTOPEN_CONVPATH: zName = "SQLITE_CANTOPEN_CONVPATH"; break; + case SQLITE_PROTOCOL: zName = "SQLITE_PROTOCOL"; break; + case SQLITE_EMPTY: zName = "SQLITE_EMPTY"; break; + case SQLITE_SCHEMA: zName = "SQLITE_SCHEMA"; break; + case SQLITE_TOOBIG: zName = "SQLITE_TOOBIG"; break; + case SQLITE_CONSTRAINT: zName = "SQLITE_CONSTRAINT"; break; + case SQLITE_CONSTRAINT_UNIQUE: zName = "SQLITE_CONSTRAINT_UNIQUE"; break; + case SQLITE_CONSTRAINT_TRIGGER: zName = "SQLITE_CONSTRAINT_TRIGGER";break; + case SQLITE_CONSTRAINT_FOREIGNKEY: + zName = "SQLITE_CONSTRAINT_FOREIGNKEY"; break; + case SQLITE_CONSTRAINT_CHECK: zName = "SQLITE_CONSTRAINT_CHECK"; break; + case SQLITE_CONSTRAINT_PRIMARYKEY: + zName = "SQLITE_CONSTRAINT_PRIMARYKEY"; break; + case SQLITE_CONSTRAINT_NOTNULL: zName = "SQLITE_CONSTRAINT_NOTNULL";break; + case SQLITE_CONSTRAINT_COMMITHOOK: + zName = "SQLITE_CONSTRAINT_COMMITHOOK"; break; + case SQLITE_CONSTRAINT_VTAB: zName = "SQLITE_CONSTRAINT_VTAB"; break; + case SQLITE_CONSTRAINT_FUNCTION: + zName = "SQLITE_CONSTRAINT_FUNCTION"; break; + case SQLITE_CONSTRAINT_ROWID: zName = "SQLITE_CONSTRAINT_ROWID"; break; + case SQLITE_MISMATCH: zName = "SQLITE_MISMATCH"; break; + case SQLITE_MISUSE: zName = "SQLITE_MISUSE"; break; + case SQLITE_NOLFS: zName = "SQLITE_NOLFS"; break; + case SQLITE_AUTH: zName = "SQLITE_AUTH"; break; + case SQLITE_FORMAT: zName = "SQLITE_FORMAT"; break; + case SQLITE_RANGE: zName = "SQLITE_RANGE"; break; + case SQLITE_NOTADB: zName = "SQLITE_NOTADB"; break; + case SQLITE_ROW: zName = "SQLITE_ROW"; break; + case SQLITE_NOTICE: zName = "SQLITE_NOTICE"; break; + case SQLITE_NOTICE_RECOVER_WAL: zName = "SQLITE_NOTICE_RECOVER_WAL";break; + case SQLITE_NOTICE_RECOVER_ROLLBACK: + zName = "SQLITE_NOTICE_RECOVER_ROLLBACK"; break; + case SQLITE_WARNING: zName = "SQLITE_WARNING"; break; + case SQLITE_WARNING_AUTOINDEX: zName = "SQLITE_WARNING_AUTOINDEX"; break; + case SQLITE_DONE: zName = "SQLITE_DONE"; break; + } + } + if( zName==0 ){ + static char zBuf[50]; + sqlite3_snprintf(sizeof(zBuf), zBuf, "SQLITE_UNKNOWN(%d)", origRc); + zName = zBuf; + } + return zName; } +#endif /* -** The following is executed when the parser accepts +** Return a static string that describes the kind of error specified in the +** argument. */ -static void yy_accept( - yyParser *yypParser /* The parser */ -){ - sqlite3ParserARG_FETCH; -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt); +SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ + static const char* const aMsg[] = { + /* SQLITE_OK */ "not an error", + /* SQLITE_ERROR */ "SQL logic error or missing database", + /* SQLITE_INTERNAL */ 0, + /* SQLITE_PERM */ "access permission denied", + /* SQLITE_ABORT */ "callback requested query abort", + /* SQLITE_BUSY */ "database is locked", + /* SQLITE_LOCKED */ "database table is locked", + /* SQLITE_NOMEM */ "out of memory", + /* SQLITE_READONLY */ "attempt to write a readonly database", + /* SQLITE_INTERRUPT */ "interrupted", + /* SQLITE_IOERR */ "disk I/O error", + /* SQLITE_CORRUPT */ "database disk image is malformed", + /* SQLITE_NOTFOUND */ "unknown operation", + /* SQLITE_FULL */ "database or disk is full", + /* SQLITE_CANTOPEN */ "unable to open database file", + /* SQLITE_PROTOCOL */ "locking protocol", + /* SQLITE_EMPTY */ "table contains no data", + /* SQLITE_SCHEMA */ "database schema has changed", + /* SQLITE_TOOBIG */ "string or blob too big", + /* SQLITE_CONSTRAINT */ "constraint failed", + /* SQLITE_MISMATCH */ "datatype mismatch", + /* SQLITE_MISUSE */ "library routine called out of sequence", + /* SQLITE_NOLFS */ "large file support is disabled", + /* SQLITE_AUTH */ "authorization denied", + /* SQLITE_FORMAT */ "auxiliary database format error", + /* SQLITE_RANGE */ "bind or column index out of range", + /* SQLITE_NOTADB */ "file is encrypted or is not a database", + }; + const char *zErr = "unknown error"; + switch( rc ){ + case SQLITE_ABORT_ROLLBACK: { + zErr = "abort due to ROLLBACK"; + break; + } + default: { + rc &= 0xff; + if( ALWAYS(rc>=0) && rcyyidx>=0 ) yy_pop_parser_stack(yypParser); - /* Here code is inserted which will be executed whenever the - ** parser accepts */ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + return zErr; } -/* The main parser program. -** The first argument is a pointer to a structure obtained from -** "sqlite3ParserAlloc" which describes the current state of the parser. -** The second argument is the major token number. The third is -** the minor token. The fourth optional argument is whatever the -** user wants (and specified in the grammar) and is available for -** use by the action routines. -** -** Inputs: -**
    -**
  • A pointer to the parser (an opaque structure.) -**
  • The major token number. -**
  • The minor token number. -**
  • An option argument of a grammar-specified type. -**
-** -** Outputs: -** None. +/* +** This routine implements a busy callback that sleeps and tries +** again until a timeout value is reached. The timeout value is +** an integer number of milliseconds passed in as the first +** argument. */ -SQLITE_PRIVATE void sqlite3Parser( - void *yyp, /* The parser */ - int yymajor, /* The major token code number */ - sqlite3ParserTOKENTYPE yyminor /* The value for the token */ - sqlite3ParserARG_PDECL /* Optional %extra_argument parameter */ +static int sqliteDefaultBusyCallback( + void *ptr, /* Database connection */ + int count /* Number of times table has been busy */ ){ - YYMINORTYPE yyminorunion; - int yyact; /* The parser action. */ - int yyendofinput; /* True if we are at the end of input */ -#ifdef YYERRORSYMBOL - int yyerrorhit = 0; /* True if yymajor has invoked an error */ -#endif - yyParser *yypParser; /* The parser */ +#if SQLITE_OS_WIN || (defined(HAVE_USLEEP) && HAVE_USLEEP) + static const u8 delays[] = + { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 }; + static const u8 totals[] = + { 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 }; +# define NDELAY ArraySize(delays) + sqlite3 *db = (sqlite3 *)ptr; + int timeout = db->busyTimeout; + int delay, prior; - /* (re)initialize the parser, if necessary */ - yypParser = (yyParser*)yyp; - if( yypParser->yyidx<0 ){ -#if YYSTACKDEPTH<=0 - if( yypParser->yystksz <=0 ){ - /*memset(&yyminorunion, 0, sizeof(yyminorunion));*/ - yyminorunion = yyzerominor; - yyStackOverflow(yypParser, &yyminorunion); - return; - } -#endif - yypParser->yyidx = 0; - yypParser->yyerrcnt = -1; - yypParser->yystack[0].stateno = 0; - yypParser->yystack[0].major = 0; + assert( count>=0 ); + if( count < NDELAY ){ + delay = delays[count]; + prior = totals[count]; + }else{ + delay = delays[NDELAY-1]; + prior = totals[NDELAY-1] + delay*(count-(NDELAY-1)); } - yyminorunion.yy0 = yyminor; - yyendofinput = (yymajor==0); - sqlite3ParserARG_STORE; - -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sInput %s\n",yyTracePrompt,yyTokenName[yymajor]); + if( prior + delay > timeout ){ + delay = timeout - prior; + if( delay<=0 ) return 0; } + sqlite3OsSleep(db->pVfs, delay*1000); + return 1; +#else + sqlite3 *db = (sqlite3 *)ptr; + int timeout = ((sqlite3 *)ptr)->busyTimeout; + if( (count+1)*1000 > timeout ){ + return 0; + } + sqlite3OsSleep(db->pVfs, 1000000); + return 1; #endif - - do{ - yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor); - if( yyactyyerrcnt--; - yymajor = YYNOCODE; - }else if( yyact < YYNSTATE + YYNRULE ){ - yy_reduce(yypParser,yyact-YYNSTATE); - }else{ - assert( yyact == YY_ERROR_ACTION ); -#ifdef YYERRORSYMBOL - int yymx; -#endif -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sSyntax Error!\n",yyTracePrompt); - } -#endif -#ifdef YYERRORSYMBOL - /* A syntax error has occurred. - ** The response to an error depends upon whether or not the - ** grammar defines an error token "ERROR". - ** - ** This is what we do if the grammar does define ERROR: - ** - ** * Call the %syntax_error function. - ** - ** * Begin popping the stack until we enter a state where - ** it is legal to shift the error symbol, then shift - ** the error symbol. - ** - ** * Set the error count to three. - ** - ** * Begin accepting and shifting new tokens. No new error - ** processing will occur until three tokens have been - ** shifted successfully. - ** - */ - if( yypParser->yyerrcnt<0 ){ - yy_syntax_error(yypParser,yymajor,yyminorunion); - } - yymx = yypParser->yystack[yypParser->yyidx].major; - if( yymx==YYERRORSYMBOL || yyerrorhit ){ -#ifndef NDEBUG - if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sDiscard input token %s\n", - yyTracePrompt,yyTokenName[yymajor]); - } -#endif - yy_destructor(yypParser, (YYCODETYPE)yymajor,&yyminorunion); - yymajor = YYNOCODE; - }else{ - while( - yypParser->yyidx >= 0 && - yymx != YYERRORSYMBOL && - (yyact = yy_find_reduce_action( - yypParser->yystack[yypParser->yyidx].stateno, - YYERRORSYMBOL)) >= YYNSTATE - ){ - yy_pop_parser_stack(yypParser); - } - if( yypParser->yyidx < 0 || yymajor==0 ){ - yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); - yy_parse_failed(yypParser); - yymajor = YYNOCODE; - }else if( yymx!=YYERRORSYMBOL ){ - YYMINORTYPE u2; - u2.YYERRSYMDT = 0; - yy_shift(yypParser,yyact,YYERRORSYMBOL,&u2); - } - } - yypParser->yyerrcnt = 3; - yyerrorhit = 1; -#elif defined(YYNOERRORRECOVERY) - /* If the YYNOERRORRECOVERY macro is defined, then do not attempt to - ** do any kind of error recovery. Instead, simply invoke the syntax - ** error routine and continue going as if nothing had happened. - ** - ** Applications can set this macro (for example inside %include) if - ** they intend to abandon the parse upon the first syntax error seen. - */ - yy_syntax_error(yypParser,yymajor,yyminorunion); - yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); - yymajor = YYNOCODE; - -#else /* YYERRORSYMBOL is not defined */ - /* This is what we do if the grammar does not define ERROR: - ** - ** * Report an error message, and throw away the input token. - ** - ** * If the input token is $, then fail the parse. - ** - ** As before, subsequent error messages are suppressed until - ** three input tokens have been successfully shifted. - */ - if( yypParser->yyerrcnt<=0 ){ - yy_syntax_error(yypParser,yymajor,yyminorunion); - } - yypParser->yyerrcnt = 3; - yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); - if( yyendofinput ){ - yy_parse_failed(yypParser); - } - yymajor = YYNOCODE; -#endif - } - }while( yymajor!=YYNOCODE && yypParser->yyidx>=0 ); - return; } -/************** End of parse.c ***********************************************/ -/************** Begin file tokenize.c ****************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** An tokenizer for SQL +** Invoke the given busy handler. ** -** This file contains C code that splits an SQL input string up into -** individual tokens and sends those tokens one-by-one over to the -** parser for analysis. +** This routine is called when an operation failed with a lock. +** If this routine returns non-zero, the lock is retried. If it +** returns 0, the operation aborts with an SQLITE_BUSY error. */ +SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p){ + int rc; + if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0; + rc = p->xFunc(p->pArg, p->nBusy); + if( rc==0 ){ + p->nBusy = -1; + }else{ + p->nBusy++; + } + return rc; +} /* -** The charMap() macro maps alphabetic characters into their -** lower-case ASCII equivalent. On ASCII machines, this is just -** an upper-to-lower case map. On EBCDIC machines we also need -** to adjust the encoding. Only alphabetic characters and underscores -** need to be translated. +** This routine sets the busy callback for an Sqlite database to the +** given callback function with the given argument. */ -#ifdef SQLITE_ASCII -# define charMap(X) sqlite3UpperToLower[(unsigned char)X] -#endif -#ifdef SQLITE_EBCDIC -# define charMap(X) ebcdicToAscii[(unsigned char)X] -const unsigned char ebcdicToAscii[] = { -/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 1x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 2x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 3x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 4x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 5x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 95, 0, 0, /* 6x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 7x */ - 0, 97, 98, 99,100,101,102,103,104,105, 0, 0, 0, 0, 0, 0, /* 8x */ - 0,106,107,108,109,110,111,112,113,114, 0, 0, 0, 0, 0, 0, /* 9x */ - 0, 0,115,116,117,118,119,120,121,122, 0, 0, 0, 0, 0, 0, /* Ax */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Bx */ - 0, 97, 98, 99,100,101,102,103,104,105, 0, 0, 0, 0, 0, 0, /* Cx */ - 0,106,107,108,109,110,111,112,113,114, 0, 0, 0, 0, 0, 0, /* Dx */ - 0, 0,115,116,117,118,119,120,121,122, 0, 0, 0, 0, 0, 0, /* Ex */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Fx */ -}; -#endif +SQLITE_API int sqlite3_busy_handler( + sqlite3 *db, + int (*xBusy)(void*,int), + void *pArg +){ + sqlite3_mutex_enter(db->mutex); + db->busyHandler.xFunc = xBusy; + db->busyHandler.pArg = pArg; + db->busyHandler.nBusy = 0; + db->busyTimeout = 0; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} +#ifndef SQLITE_OMIT_PROGRESS_CALLBACK /* -** The sqlite3KeywordCode function looks up an identifier to determine if -** it is a keyword. If it is a keyword, the token code of that keyword is -** returned. If the input is not a keyword, TK_ID is returned. -** -** The implementation of this routine was generated by a program, -** mkkeywordhash.h, located in the tool subdirectory of the distribution. -** The output of the mkkeywordhash.c program is written into a file -** named keywordhash.h and then included into this source file by -** the #include below. -*/ -/************** Include keywordhash.h in the middle of tokenize.c ************/ -/************** Begin file keywordhash.h *************************************/ -/***** This file contains automatically generated code ****** -** -** The code in this file has been automatically generated by -** -** sqlite/tool/mkkeywordhash.c -** -** The code in this file implements a function that determines whether -** or not a given identifier is really an SQL keyword. The same thing -** might be implemented more directly using a hand-written hash table. -** But by using this automatically generated code, the size of the code -** is substantially reduced. This is important for embedded applications -** on platforms with limited memory. -*/ -/* Hash score: 175 */ -static int keywordCode(const char *z, int n){ - /* zText[] encodes 811 bytes of keywords in 541 bytes */ - /* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */ - /* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */ - /* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */ - /* UNIQUERYATTACHAVINGROUPDATEBEGINNERELEASEBETWEENOTNULLIKE */ - /* CASCADELETECASECOLLATECREATECURRENT_DATEDETACHIMMEDIATEJOIN */ - /* SERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHENWHERENAME */ - /* AFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMITCONFLICTCROSS */ - /* CURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAILFROMFULLGLOBYIF */ - /* ISNULLORDERESTRICTOUTERIGHTROLLBACKROWUNIONUSINGVACUUMVIEW */ - /* INITIALLY */ - static const char zText[540] = { - 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H', - 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G', - 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A', - 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F', - 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N', - 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I', - 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E', - 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E', - 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T', - 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q', - 'U','E','R','Y','A','T','T','A','C','H','A','V','I','N','G','R','O','U', - 'P','D','A','T','E','B','E','G','I','N','N','E','R','E','L','E','A','S', - 'E','B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C', - 'A','S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L', - 'A','T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D', - 'A','T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E', - 'J','O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A', - 'L','Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U', - 'E','S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W', - 'H','E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C', - 'E','A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R', - 'E','M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M', - 'M','I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U', - 'R','R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M', - 'A','R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T', - 'D','R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L', - 'O','B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S', - 'T','R','I','C','T','O','U','T','E','R','I','G','H','T','R','O','L','L', - 'B','A','C','K','R','O','W','U','N','I','O','N','U','S','I','N','G','V', - 'A','C','U','U','M','V','I','E','W','I','N','I','T','I','A','L','L','Y', - }; - static const unsigned char aHash[127] = { - 72, 101, 114, 70, 0, 45, 0, 0, 78, 0, 73, 0, 0, - 42, 12, 74, 15, 0, 113, 81, 50, 108, 0, 19, 0, 0, - 118, 0, 116, 111, 0, 22, 89, 0, 9, 0, 0, 66, 67, - 0, 65, 6, 0, 48, 86, 98, 0, 115, 97, 0, 0, 44, - 0, 99, 24, 0, 17, 0, 119, 49, 23, 0, 5, 106, 25, - 92, 0, 0, 121, 102, 56, 120, 53, 28, 51, 0, 87, 0, - 96, 26, 0, 95, 0, 0, 0, 91, 88, 93, 84, 105, 14, - 39, 104, 0, 77, 0, 18, 85, 107, 32, 0, 117, 76, 109, - 58, 46, 80, 0, 0, 90, 40, 0, 112, 0, 36, 0, 0, - 29, 0, 82, 59, 60, 0, 20, 57, 0, 52, - }; - static const unsigned char aNext[121] = { - 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, - 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 43, 3, 47, - 0, 0, 0, 0, 30, 0, 54, 0, 38, 0, 0, 0, 1, - 62, 0, 0, 63, 0, 41, 0, 0, 0, 0, 0, 0, 0, - 61, 0, 0, 0, 0, 31, 55, 16, 34, 10, 0, 0, 0, - 0, 0, 0, 0, 11, 68, 75, 0, 8, 0, 100, 94, 0, - 103, 0, 83, 0, 71, 0, 0, 110, 27, 37, 69, 79, 0, - 35, 64, 0, 0, - }; - static const unsigned char aLen[121] = { - 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6, - 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6, - 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10, - 4, 6, 2, 3, 9, 4, 2, 6, 5, 6, 6, 5, 6, - 5, 5, 7, 7, 7, 3, 2, 4, 4, 7, 3, 6, 4, - 7, 6, 12, 6, 9, 4, 6, 5, 4, 7, 6, 5, 6, - 7, 5, 4, 5, 6, 5, 7, 3, 7, 13, 2, 2, 4, - 6, 6, 8, 5, 17, 12, 7, 8, 8, 2, 4, 4, 4, - 4, 4, 2, 2, 6, 5, 8, 5, 5, 8, 3, 5, 5, - 6, 4, 9, 3, - }; - static const unsigned short int aOffset[121] = { - 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33, - 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81, - 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152, - 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 189, 194, 197, - 203, 206, 210, 217, 223, 223, 223, 226, 229, 233, 234, 238, 244, - 248, 255, 261, 273, 279, 288, 290, 296, 301, 303, 310, 315, 320, - 326, 332, 337, 341, 344, 350, 354, 361, 363, 370, 372, 374, 383, - 387, 393, 399, 407, 412, 412, 428, 435, 442, 443, 450, 454, 458, - 462, 466, 469, 471, 473, 479, 483, 491, 495, 500, 508, 511, 516, - 521, 527, 531, 536, - }; - static const unsigned char aCode[121] = { - TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE, - TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN, - TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD, - TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE, - TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE, - TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW, - TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT, - TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO, - TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP, - TK_OR, TK_UNIQUE, TK_QUERY, TK_ATTACH, TK_HAVING, - TK_GROUP, TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RELEASE, - TK_BETWEEN, TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, - TK_LIKE_KW, TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, - TK_COLLATE, TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, - TK_JOIN, TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, - TK_PRAGMA, TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, - TK_WHEN, TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, - TK_AND, TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, - TK_CAST, TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, - TK_CTIME_KW, TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, - TK_IS, TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, - TK_LIKE_KW, TK_BY, TK_IF, TK_ISNULL, TK_ORDER, - TK_RESTRICT, TK_JOIN_KW, TK_JOIN_KW, TK_ROLLBACK, TK_ROW, - TK_UNION, TK_USING, TK_VACUUM, TK_VIEW, TK_INITIALLY, - TK_ALL, - }; - int h, i; - if( n<2 ) return TK_ID; - h = ((charMap(z[0])*4) ^ - (charMap(z[n-1])*3) ^ - n) % 127; - for(i=((int)aHash[h])-1; i>=0; i=((int)aNext[i])-1){ - if( aLen[i]==n && sqlite3StrNICmp(&zText[aOffset[i]],z,n)==0 ){ - testcase( i==0 ); /* REINDEX */ - testcase( i==1 ); /* INDEXED */ - testcase( i==2 ); /* INDEX */ - testcase( i==3 ); /* DESC */ - testcase( i==4 ); /* ESCAPE */ - testcase( i==5 ); /* EACH */ - testcase( i==6 ); /* CHECK */ - testcase( i==7 ); /* KEY */ - testcase( i==8 ); /* BEFORE */ - testcase( i==9 ); /* FOREIGN */ - testcase( i==10 ); /* FOR */ - testcase( i==11 ); /* IGNORE */ - testcase( i==12 ); /* REGEXP */ - testcase( i==13 ); /* EXPLAIN */ - testcase( i==14 ); /* INSTEAD */ - testcase( i==15 ); /* ADD */ - testcase( i==16 ); /* DATABASE */ - testcase( i==17 ); /* AS */ - testcase( i==18 ); /* SELECT */ - testcase( i==19 ); /* TABLE */ - testcase( i==20 ); /* LEFT */ - testcase( i==21 ); /* THEN */ - testcase( i==22 ); /* END */ - testcase( i==23 ); /* DEFERRABLE */ - testcase( i==24 ); /* ELSE */ - testcase( i==25 ); /* EXCEPT */ - testcase( i==26 ); /* TRANSACTION */ - testcase( i==27 ); /* ACTION */ - testcase( i==28 ); /* ON */ - testcase( i==29 ); /* NATURAL */ - testcase( i==30 ); /* ALTER */ - testcase( i==31 ); /* RAISE */ - testcase( i==32 ); /* EXCLUSIVE */ - testcase( i==33 ); /* EXISTS */ - testcase( i==34 ); /* SAVEPOINT */ - testcase( i==35 ); /* INTERSECT */ - testcase( i==36 ); /* TRIGGER */ - testcase( i==37 ); /* REFERENCES */ - testcase( i==38 ); /* CONSTRAINT */ - testcase( i==39 ); /* INTO */ - testcase( i==40 ); /* OFFSET */ - testcase( i==41 ); /* OF */ - testcase( i==42 ); /* SET */ - testcase( i==43 ); /* TEMPORARY */ - testcase( i==44 ); /* TEMP */ - testcase( i==45 ); /* OR */ - testcase( i==46 ); /* UNIQUE */ - testcase( i==47 ); /* QUERY */ - testcase( i==48 ); /* ATTACH */ - testcase( i==49 ); /* HAVING */ - testcase( i==50 ); /* GROUP */ - testcase( i==51 ); /* UPDATE */ - testcase( i==52 ); /* BEGIN */ - testcase( i==53 ); /* INNER */ - testcase( i==54 ); /* RELEASE */ - testcase( i==55 ); /* BETWEEN */ - testcase( i==56 ); /* NOTNULL */ - testcase( i==57 ); /* NOT */ - testcase( i==58 ); /* NO */ - testcase( i==59 ); /* NULL */ - testcase( i==60 ); /* LIKE */ - testcase( i==61 ); /* CASCADE */ - testcase( i==62 ); /* ASC */ - testcase( i==63 ); /* DELETE */ - testcase( i==64 ); /* CASE */ - testcase( i==65 ); /* COLLATE */ - testcase( i==66 ); /* CREATE */ - testcase( i==67 ); /* CURRENT_DATE */ - testcase( i==68 ); /* DETACH */ - testcase( i==69 ); /* IMMEDIATE */ - testcase( i==70 ); /* JOIN */ - testcase( i==71 ); /* INSERT */ - testcase( i==72 ); /* MATCH */ - testcase( i==73 ); /* PLAN */ - testcase( i==74 ); /* ANALYZE */ - testcase( i==75 ); /* PRAGMA */ - testcase( i==76 ); /* ABORT */ - testcase( i==77 ); /* VALUES */ - testcase( i==78 ); /* VIRTUAL */ - testcase( i==79 ); /* LIMIT */ - testcase( i==80 ); /* WHEN */ - testcase( i==81 ); /* WHERE */ - testcase( i==82 ); /* RENAME */ - testcase( i==83 ); /* AFTER */ - testcase( i==84 ); /* REPLACE */ - testcase( i==85 ); /* AND */ - testcase( i==86 ); /* DEFAULT */ - testcase( i==87 ); /* AUTOINCREMENT */ - testcase( i==88 ); /* TO */ - testcase( i==89 ); /* IN */ - testcase( i==90 ); /* CAST */ - testcase( i==91 ); /* COLUMN */ - testcase( i==92 ); /* COMMIT */ - testcase( i==93 ); /* CONFLICT */ - testcase( i==94 ); /* CROSS */ - testcase( i==95 ); /* CURRENT_TIMESTAMP */ - testcase( i==96 ); /* CURRENT_TIME */ - testcase( i==97 ); /* PRIMARY */ - testcase( i==98 ); /* DEFERRED */ - testcase( i==99 ); /* DISTINCT */ - testcase( i==100 ); /* IS */ - testcase( i==101 ); /* DROP */ - testcase( i==102 ); /* FAIL */ - testcase( i==103 ); /* FROM */ - testcase( i==104 ); /* FULL */ - testcase( i==105 ); /* GLOB */ - testcase( i==106 ); /* BY */ - testcase( i==107 ); /* IF */ - testcase( i==108 ); /* ISNULL */ - testcase( i==109 ); /* ORDER */ - testcase( i==110 ); /* RESTRICT */ - testcase( i==111 ); /* OUTER */ - testcase( i==112 ); /* RIGHT */ - testcase( i==113 ); /* ROLLBACK */ - testcase( i==114 ); /* ROW */ - testcase( i==115 ); /* UNION */ - testcase( i==116 ); /* USING */ - testcase( i==117 ); /* VACUUM */ - testcase( i==118 ); /* VIEW */ - testcase( i==119 ); /* INITIALLY */ - testcase( i==120 ); /* ALL */ - return aCode[i]; - } +** This routine sets the progress callback for an Sqlite database to the +** given callback function with the given argument. The progress callback will +** be invoked every nOps opcodes. +*/ +SQLITE_API void sqlite3_progress_handler( + sqlite3 *db, + int nOps, + int (*xProgress)(void*), + void *pArg +){ + sqlite3_mutex_enter(db->mutex); + if( nOps>0 ){ + db->xProgress = xProgress; + db->nProgressOps = (unsigned)nOps; + db->pProgressArg = pArg; + }else{ + db->xProgress = 0; + db->nProgressOps = 0; + db->pProgressArg = 0; } - return TK_ID; -} -SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char *z, int n){ - return keywordCode((char*)z, n); + sqlite3_mutex_leave(db->mutex); } -#define SQLITE_N_KEYWORD 121 +#endif -/************** End of keywordhash.h *****************************************/ -/************** Continuing where we left off in tokenize.c *******************/ +/* +** This routine installs a default busy handler that waits for the +** specified number of milliseconds before returning 0. +*/ +SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){ + if( ms>0 ){ + sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db); + db->busyTimeout = ms; + }else{ + sqlite3_busy_handler(db, 0, 0); + } + return SQLITE_OK; +} /* -** If X is a character that can be used in an identifier then -** IdChar(X) will be true. Otherwise it is false. -** -** For ASCII, any character with the high-order bit set is -** allowed in an identifier. For 7-bit characters, -** sqlite3IsIdChar[X] must be 1. -** -** For EBCDIC, the rules are more complex but have the same -** end result. -** -** Ticket #1066. the SQL standard does not allow '$' in the -** middle of identfiers. But many SQL implementations do. -** SQLite will allow '$' in identifiers for compatibility. -** But the feature is undocumented. +** Cause any pending operation to stop at its earliest opportunity. */ -#ifdef SQLITE_ASCII -#define IdChar(C) ((sqlite3CtypeMap[(unsigned char)C]&0x46)!=0) -#endif -#ifdef SQLITE_EBCDIC -SQLITE_PRIVATE const char sqlite3IsEbcdicIdChar[] = { -/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF */ - 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 4x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, /* 5x */ - 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, /* 6x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, /* 7x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 0, /* 8x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 0, 1, 0, /* 9x */ - 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 0, /* Ax */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* Bx */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Cx */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Dx */ - 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, /* Ex */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, /* Fx */ -}; -#define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) -#endif +SQLITE_API void sqlite3_interrupt(sqlite3 *db){ + db->u1.isInterrupted = 1; +} /* -** Return the length of the token that begins at z[0]. -** Store the token type in *tokenType before returning. +** This function is exactly the same as sqlite3_create_function(), except +** that it is designed to be called by internal code. The difference is +** that if a malloc() fails in sqlite3_create_function(), an error code +** is returned and the mallocFailed flag cleared. */ -SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *z, int *tokenType){ - int i, c; - switch( *z ){ - case ' ': case '\t': case '\n': case '\f': case '\r': { - testcase( z[0]==' ' ); - testcase( z[0]=='\t' ); - testcase( z[0]=='\n' ); - testcase( z[0]=='\f' ); - testcase( z[0]=='\r' ); - for(i=1; sqlite3Isspace(z[i]); i++){} - *tokenType = TK_SPACE; - return i; - } - case '-': { - if( z[1]=='-' ){ - /* IMP: R-15891-05542 -- syntax diagram for comments */ - for(i=2; (c=z[i])!=0 && c!='\n'; i++){} - *tokenType = TK_SPACE; /* IMP: R-22934-25134 */ - return i; - } - *tokenType = TK_MINUS; - return 1; - } - case '(': { - *tokenType = TK_LP; - return 1; - } - case ')': { - *tokenType = TK_RP; - return 1; - } - case ';': { - *tokenType = TK_SEMI; - return 1; - } - case '+': { - *tokenType = TK_PLUS; - return 1; - } - case '*': { - *tokenType = TK_STAR; - return 1; - } - case '/': { - if( z[1]!='*' || z[2]==0 ){ - *tokenType = TK_SLASH; - return 1; - } - /* IMP: R-15891-05542 -- syntax diagram for comments */ - for(i=3, c=z[2]; (c!='*' || z[i]!='/') && (c=z[i])!=0; i++){} - if( c ) i++; - *tokenType = TK_SPACE; /* IMP: R-22934-25134 */ - return i; - } - case '%': { - *tokenType = TK_REM; - return 1; - } - case '=': { - *tokenType = TK_EQ; - return 1 + (z[1]=='='); - } - case '<': { - if( (c=z[1])=='=' ){ - *tokenType = TK_LE; - return 2; - }else if( c=='>' ){ - *tokenType = TK_NE; - return 2; - }else if( c=='<' ){ - *tokenType = TK_LSHIFT; - return 2; - }else{ - *tokenType = TK_LT; - return 1; - } - } - case '>': { - if( (c=z[1])=='=' ){ - *tokenType = TK_GE; - return 2; - }else if( c=='>' ){ - *tokenType = TK_RSHIFT; - return 2; - }else{ - *tokenType = TK_GT; - return 1; - } - } - case '!': { - if( z[1]!='=' ){ - *tokenType = TK_ILLEGAL; - return 2; - }else{ - *tokenType = TK_NE; - return 2; - } - } - case '|': { - if( z[1]!='|' ){ - *tokenType = TK_BITOR; - return 1; - }else{ - *tokenType = TK_CONCAT; - return 2; - } - } - case ',': { - *tokenType = TK_COMMA; - return 1; - } - case '&': { - *tokenType = TK_BITAND; - return 1; - } - case '~': { - *tokenType = TK_BITNOT; - return 1; - } - case '`': - case '\'': - case '"': { - int delim = z[0]; - testcase( delim=='`' ); - testcase( delim=='\'' ); - testcase( delim=='"' ); - for(i=1; (c=z[i])!=0; i++){ - if( c==delim ){ - if( z[i+1]==delim ){ - i++; - }else{ - break; - } - } - } - if( c=='\'' ){ - *tokenType = TK_STRING; - return i+1; - }else if( c!=0 ){ - *tokenType = TK_ID; - return i+1; - }else{ - *tokenType = TK_ILLEGAL; - return i; - } +SQLITE_PRIVATE int sqlite3CreateFunc( + sqlite3 *db, + const char *zFunctionName, + int nArg, + int enc, + void *pUserData, + void (*xFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + FuncDestructor *pDestructor +){ + FuncDef *p; + int nName; + int extraFlags; + + assert( sqlite3_mutex_held(db->mutex) ); + if( zFunctionName==0 || + (xFunc && (xFinal || xStep)) || + (!xFunc && (xFinal && !xStep)) || + (!xFunc && (!xFinal && xStep)) || + (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) || + (255<(nName = sqlite3Strlen30( zFunctionName))) ){ + return SQLITE_MISUSE_BKPT; + } + + assert( SQLITE_FUNC_CONSTANT==SQLITE_DETERMINISTIC ); + extraFlags = enc & SQLITE_DETERMINISTIC; + enc &= (SQLITE_FUNC_ENCMASK|SQLITE_ANY); + +#ifndef SQLITE_OMIT_UTF16 + /* If SQLITE_UTF16 is specified as the encoding type, transform this + ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the + ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. + ** + ** If SQLITE_ANY is specified, add three versions of the function + ** to the hash table. + */ + if( enc==SQLITE_UTF16 ){ + enc = SQLITE_UTF16NATIVE; + }else if( enc==SQLITE_ANY ){ + int rc; + rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF8|extraFlags, + pUserData, xFunc, xStep, xFinal, pDestructor); + if( rc==SQLITE_OK ){ + rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF16LE|extraFlags, + pUserData, xFunc, xStep, xFinal, pDestructor); } - case '.': { -#ifndef SQLITE_OMIT_FLOATING_POINT - if( !sqlite3Isdigit(z[1]) ) -#endif - { - *tokenType = TK_DOT; - return 1; - } - /* If the next character is a digit, this is a floating point - ** number that begins with ".". Fall thru into the next case */ + if( rc!=SQLITE_OK ){ + return rc; } - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': { - testcase( z[0]=='0' ); testcase( z[0]=='1' ); testcase( z[0]=='2' ); - testcase( z[0]=='3' ); testcase( z[0]=='4' ); testcase( z[0]=='5' ); - testcase( z[0]=='6' ); testcase( z[0]=='7' ); testcase( z[0]=='8' ); - testcase( z[0]=='9' ); - *tokenType = TK_INTEGER; - for(i=0; sqlite3Isdigit(z[i]); i++){} -#ifndef SQLITE_OMIT_FLOATING_POINT - if( z[i]=='.' ){ - i++; - while( sqlite3Isdigit(z[i]) ){ i++; } - *tokenType = TK_FLOAT; - } - if( (z[i]=='e' || z[i]=='E') && - ( sqlite3Isdigit(z[i+1]) - || ((z[i+1]=='+' || z[i+1]=='-') && sqlite3Isdigit(z[i+2])) - ) - ){ - i += 2; - while( sqlite3Isdigit(z[i]) ){ i++; } - *tokenType = TK_FLOAT; - } + enc = SQLITE_UTF16BE; + } +#else + enc = SQLITE_UTF8; #endif - while( IdChar(z[i]) ){ - *tokenType = TK_ILLEGAL; - i++; - } - return i; - } - case '[': { - for(i=1, c=z[0]; c!=']' && (c=z[i])!=0; i++){} - *tokenType = c==']' ? TK_ID : TK_ILLEGAL; - return i; - } - case '?': { - *tokenType = TK_VARIABLE; - for(i=1; sqlite3Isdigit(z[i]); i++){} - return i; + + /* Check if an existing function is being overridden or deleted. If so, + ** and there are active VMs, then return SQLITE_BUSY. If a function + ** is being overridden/deleted but there are no active VMs, allow the + ** operation to continue but invalidate all precompiled statements. + */ + p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 0); + if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==enc && p->nArg==nArg ){ + if( db->nVdbeActive ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, + "unable to delete/modify user-function due to active statements"); + assert( !db->mallocFailed ); + return SQLITE_BUSY; + }else{ + sqlite3ExpirePreparedStatements(db); } - case '#': { - for(i=1; sqlite3Isdigit(z[i]); i++){} - if( i>1 ){ - /* Parameters of the form #NNN (where NNN is a number) are used - ** internally by sqlite3NestedParse. */ - *tokenType = TK_REGISTER; - return i; - } - /* Fall through into the next case if the '#' is not followed by - ** a digit. Try to match #AAAA where AAAA is a parameter name. */ + } + + p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 1); + assert(p || db->mallocFailed); + if( !p ){ + return SQLITE_NOMEM; + } + + /* If an older version of the function with a configured destructor is + ** being replaced invoke the destructor function here. */ + functionDestroy(db, p); + + if( pDestructor ){ + pDestructor->nRef++; + } + p->pDestructor = pDestructor; + p->funcFlags = (p->funcFlags & SQLITE_FUNC_ENCMASK) | extraFlags; + testcase( p->funcFlags & SQLITE_DETERMINISTIC ); + p->xFunc = xFunc; + p->xStep = xStep; + p->xFinalize = xFinal; + p->pUserData = pUserData; + p->nArg = (u16)nArg; + return SQLITE_OK; +} + +/* +** Create new user functions. +*/ +SQLITE_API int sqlite3_create_function( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*) +){ + return sqlite3_create_function_v2(db, zFunc, nArg, enc, p, xFunc, xStep, + xFinal, 0); +} + +SQLITE_API int sqlite3_create_function_v2( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xDestroy)(void *) +){ + int rc = SQLITE_ERROR; + FuncDestructor *pArg = 0; + sqlite3_mutex_enter(db->mutex); + if( xDestroy ){ + pArg = (FuncDestructor *)sqlite3DbMallocZero(db, sizeof(FuncDestructor)); + if( !pArg ){ + xDestroy(p); + goto out; } -#ifndef SQLITE_OMIT_TCL_VARIABLE - case '$': + pArg->xDestroy = xDestroy; + pArg->pUserData = p; + } + rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, xFunc, xStep, xFinal, pArg); + if( pArg && pArg->nRef==0 ){ + assert( rc!=SQLITE_OK ); + xDestroy(p); + sqlite3DbFree(db, pArg); + } + + out: + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +#ifndef SQLITE_OMIT_UTF16 +SQLITE_API int sqlite3_create_function16( + sqlite3 *db, + const void *zFunctionName, + int nArg, + int eTextRep, + void *p, + void (*xFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*) +){ + int rc; + char *zFunc8; + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE); + rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xFunc, xStep, xFinal,0); + sqlite3DbFree(db, zFunc8); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} #endif - case '@': /* For compatibility with MS SQL Server */ - case ':': { - int n = 0; - testcase( z[0]=='$' ); testcase( z[0]=='@' ); testcase( z[0]==':' ); - *tokenType = TK_VARIABLE; - for(i=1; (c=z[i])!=0; i++){ - if( IdChar(c) ){ - n++; -#ifndef SQLITE_OMIT_TCL_VARIABLE - }else if( c=='(' && n>0 ){ - do{ - i++; - }while( (c=z[i])!=0 && !sqlite3Isspace(c) && c!=')' ); - if( c==')' ){ - i++; - }else{ - *tokenType = TK_ILLEGAL; - } - break; - }else if( c==':' && z[i+1]==':' ){ - i++; + + +/* +** Declare that a function has been overloaded by a virtual table. +** +** If the function already exists as a regular global function, then +** this routine is a no-op. If the function does not exist, then create +** a new one that always throws a run-time error. +** +** When virtual tables intend to provide an overloaded function, they +** should call this routine to make sure the global function exists. +** A global function must exist in order for name resolution to work +** properly. +*/ +SQLITE_API int sqlite3_overload_function( + sqlite3 *db, + const char *zName, + int nArg +){ + int nName = sqlite3Strlen30(zName); + int rc = SQLITE_OK; + sqlite3_mutex_enter(db->mutex); + if( sqlite3FindFunction(db, zName, nName, nArg, SQLITE_UTF8, 0)==0 ){ + rc = sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8, + 0, sqlite3InvalidFunction, 0, 0, 0); + } + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +#ifndef SQLITE_OMIT_TRACE +/* +** Register a trace function. The pArg from the previously registered trace +** is returned. +** +** A NULL trace function means that no tracing is executes. A non-NULL +** trace is a pointer to a function that is invoked at the start of each +** SQL statement. +*/ +SQLITE_API void *sqlite3_trace(sqlite3 *db, void (*xTrace)(void*,const char*), void *pArg){ + void *pOld; + sqlite3_mutex_enter(db->mutex); + pOld = db->pTraceArg; + db->xTrace = xTrace; + db->pTraceArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pOld; +} +/* +** Register a profile function. The pArg from the previously registered +** profile function is returned. +** +** A NULL profile function means that no profiling is executes. A non-NULL +** profile is a pointer to a function that is invoked at the conclusion of +** each SQL statement that is run. +*/ +SQLITE_API void *sqlite3_profile( + sqlite3 *db, + void (*xProfile)(void*,const char*,sqlite_uint64), + void *pArg +){ + void *pOld; + sqlite3_mutex_enter(db->mutex); + pOld = db->pProfileArg; + db->xProfile = xProfile; + db->pProfileArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pOld; +} +#endif /* SQLITE_OMIT_TRACE */ + +/* +** Register a function to be invoked when a transaction commits. +** If the invoked function returns non-zero, then the commit becomes a +** rollback. +*/ +SQLITE_API void *sqlite3_commit_hook( + sqlite3 *db, /* Attach the hook to this database */ + int (*xCallback)(void*), /* Function to invoke on each commit */ + void *pArg /* Argument to the function */ +){ + void *pOld; + sqlite3_mutex_enter(db->mutex); + pOld = db->pCommitArg; + db->xCommitCallback = xCallback; + db->pCommitArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pOld; +} + +/* +** Register a callback to be invoked each time a row is updated, +** inserted or deleted using this database connection. +*/ +SQLITE_API void *sqlite3_update_hook( + sqlite3 *db, /* Attach the hook to this database */ + void (*xCallback)(void*,int,char const *,char const *,sqlite_int64), + void *pArg /* Argument to the function */ +){ + void *pRet; + sqlite3_mutex_enter(db->mutex); + pRet = db->pUpdateArg; + db->xUpdateCallback = xCallback; + db->pUpdateArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +} + +/* +** Register a callback to be invoked each time a transaction is rolled +** back by this database connection. +*/ +SQLITE_API void *sqlite3_rollback_hook( + sqlite3 *db, /* Attach the hook to this database */ + void (*xCallback)(void*), /* Callback function */ + void *pArg /* Argument to the function */ +){ + void *pRet; + sqlite3_mutex_enter(db->mutex); + pRet = db->pRollbackArg; + db->xRollbackCallback = xCallback; + db->pRollbackArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +} + +#ifndef SQLITE_OMIT_WAL +/* +** The sqlite3_wal_hook() callback registered by sqlite3_wal_autocheckpoint(). +** Invoke sqlite3_wal_checkpoint if the number of frames in the log file +** is greater than sqlite3.pWalArg cast to an integer (the value configured by +** wal_autocheckpoint()). +*/ +SQLITE_PRIVATE int sqlite3WalDefaultHook( + void *pClientData, /* Argument */ + sqlite3 *db, /* Connection */ + const char *zDb, /* Database */ + int nFrame /* Size of WAL */ +){ + if( nFrame>=SQLITE_PTR_TO_INT(pClientData) ){ + sqlite3BeginBenignMalloc(); + sqlite3_wal_checkpoint(db, zDb); + sqlite3EndBenignMalloc(); + } + return SQLITE_OK; +} +#endif /* SQLITE_OMIT_WAL */ + +/* +** Configure an sqlite3_wal_hook() callback to automatically checkpoint +** a database after committing a transaction if there are nFrame or +** more frames in the log file. Passing zero or a negative value as the +** nFrame parameter disables automatic checkpoints entirely. +** +** The callback registered by this function replaces any existing callback +** registered using sqlite3_wal_hook(). Likewise, registering a callback +** using sqlite3_wal_hook() disables the automatic checkpoint mechanism +** configured by this function. +*/ +SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){ +#ifdef SQLITE_OMIT_WAL + UNUSED_PARAMETER(db); + UNUSED_PARAMETER(nFrame); +#else + if( nFrame>0 ){ + sqlite3_wal_hook(db, sqlite3WalDefaultHook, SQLITE_INT_TO_PTR(nFrame)); + }else{ + sqlite3_wal_hook(db, 0, 0); + } #endif - }else{ - break; - } - } - if( n==0 ) *tokenType = TK_ILLEGAL; - return i; - } -#ifndef SQLITE_OMIT_BLOB_LITERAL - case 'x': case 'X': { - testcase( z[0]=='x' ); testcase( z[0]=='X' ); - if( z[1]=='\'' ){ - *tokenType = TK_BLOB; - for(i=2; sqlite3Isxdigit(z[i]); i++){} - if( z[i]!='\'' || i%2 ){ - *tokenType = TK_ILLEGAL; - while( z[i] && z[i]!='\'' ){ i++; } - } - if( z[i] ) i++; - return i; - } - /* Otherwise fall through to the next case */ - } + return SQLITE_OK; +} + +/* +** Register a callback to be invoked each time a transaction is written +** into the write-ahead-log by this database connection. +*/ +SQLITE_API void *sqlite3_wal_hook( + sqlite3 *db, /* Attach the hook to this db handle */ + int(*xCallback)(void *, sqlite3*, const char*, int), + void *pArg /* First argument passed to xCallback() */ +){ +#ifndef SQLITE_OMIT_WAL + void *pRet; + sqlite3_mutex_enter(db->mutex); + pRet = db->pWalArg; + db->xWalCallback = xCallback; + db->pWalArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +#else + return 0; #endif - default: { - if( !IdChar(*z) ){ - break; - } - for(i=1; IdChar(z[i]); i++){} - *tokenType = keywordCode((char*)z, i); - return i; - } - } - *tokenType = TK_ILLEGAL; - return 1; } /* -** Run the parser on the given SQL string. The parser structure is -** passed in. An SQLITE_ status code is returned. If an error occurs -** then an and attempt is made to write an error message into -** memory obtained from sqlite3_malloc() and to make *pzErrMsg point to that -** error message. +** Checkpoint database zDb. */ -SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){ - int nErr = 0; /* Number of errors encountered */ - int i; /* Loop counter */ - void *pEngine; /* The LEMON-generated LALR(1) parser */ - int tokenType; /* type of the next token */ - int lastTokenParsed = -1; /* type of the previous token */ - u8 enableLookaside; /* Saved value of db->lookaside.bEnabled */ - sqlite3 *db = pParse->db; /* The database connection */ - int mxSqlLen; /* Max length of an SQL string */ +SQLITE_API int sqlite3_wal_checkpoint_v2( + sqlite3 *db, /* Database handle */ + const char *zDb, /* Name of attached database (or NULL) */ + int eMode, /* SQLITE_CHECKPOINT_* value */ + int *pnLog, /* OUT: Size of WAL log in frames */ + int *pnCkpt /* OUT: Total number of frames checkpointed */ +){ +#ifdef SQLITE_OMIT_WAL + return SQLITE_OK; +#else + int rc; /* Return code */ + int iDb = SQLITE_MAX_ATTACHED; /* sqlite3.aDb[] index of db to checkpoint */ + /* Initialize the output variables to -1 in case an error occurs. */ + if( pnLog ) *pnLog = -1; + if( pnCkpt ) *pnCkpt = -1; - mxSqlLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH]; - if( db->activeVdbeCnt==0 ){ - db->u1.isInterrupted = 0; + assert( SQLITE_CHECKPOINT_FULL>SQLITE_CHECKPOINT_PASSIVE ); + assert( SQLITE_CHECKPOINT_FULLSQLITE_CHECKPOINT_RESTART ){ + return SQLITE_MISUSE; } - pParse->rc = SQLITE_OK; - pParse->zTail = zSql; - i = 0; - assert( pzErrMsg!=0 ); - pEngine = sqlite3ParserAlloc((void*(*)(size_t))sqlite3Malloc); - if( pEngine==0 ){ - db->mallocFailed = 1; - return SQLITE_NOMEM; + + sqlite3_mutex_enter(db->mutex); + if( zDb && zDb[0] ){ + iDb = sqlite3FindDbName(db, zDb); } - assert( pParse->pNewTable==0 ); - assert( pParse->pNewTrigger==0 ); - assert( pParse->nVar==0 ); - assert( pParse->nzVar==0 ); - assert( pParse->azVar==0 ); - enableLookaside = db->lookaside.bEnabled; - if( db->lookaside.pStart ) db->lookaside.bEnabled = 1; - while( !db->mallocFailed && zSql[i]!=0 ){ - assert( i>=0 ); - pParse->sLastToken.z = &zSql[i]; - pParse->sLastToken.n = sqlite3GetToken((unsigned char*)&zSql[i],&tokenType); - i += pParse->sLastToken.n; - if( i>mxSqlLen ){ - pParse->rc = SQLITE_TOOBIG; - break; - } - switch( tokenType ){ - case TK_SPACE: { - if( db->u1.isInterrupted ){ - sqlite3ErrorMsg(pParse, "interrupt"); - pParse->rc = SQLITE_INTERRUPT; - goto abort_parse; - } - break; - } - case TK_ILLEGAL: { - sqlite3DbFree(db, *pzErrMsg); - *pzErrMsg = sqlite3MPrintf(db, "unrecognized token: \"%T\"", - &pParse->sLastToken); - nErr++; - goto abort_parse; - } - case TK_SEMI: { - pParse->zTail = &zSql[i]; - /* Fall thru into the default case */ - } - default: { - sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse); - lastTokenParsed = tokenType; - if( pParse->rc!=SQLITE_OK ){ - goto abort_parse; - } - break; - } - } + if( iDb<0 ){ + rc = SQLITE_ERROR; + sqlite3ErrorWithMsg(db, SQLITE_ERROR, "unknown database: %s", zDb); + }else{ + rc = sqlite3Checkpoint(db, iDb, eMode, pnLog, pnCkpt); + sqlite3Error(db, rc); } -abort_parse: - if( zSql[i]==0 && nErr==0 && pParse->rc==SQLITE_OK ){ - if( lastTokenParsed!=TK_SEMI ){ - sqlite3Parser(pEngine, TK_SEMI, pParse->sLastToken, pParse); - pParse->zTail = &zSql[i]; + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +#endif +} + + +/* +** Checkpoint database zDb. If zDb is NULL, or if the buffer zDb points +** to contains a zero-length string, all attached databases are +** checkpointed. +*/ +SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){ + return sqlite3_wal_checkpoint_v2(db, zDb, SQLITE_CHECKPOINT_PASSIVE, 0, 0); +} + +#ifndef SQLITE_OMIT_WAL +/* +** Run a checkpoint on database iDb. This is a no-op if database iDb is +** not currently open in WAL mode. +** +** If a transaction is open on the database being checkpointed, this +** function returns SQLITE_LOCKED and a checkpoint is not attempted. If +** an error occurs while running the checkpoint, an SQLite error code is +** returned (i.e. SQLITE_IOERR). Otherwise, SQLITE_OK. +** +** The mutex on database handle db should be held by the caller. The mutex +** associated with the specific b-tree being checkpointed is taken by +** this function while the checkpoint is running. +** +** If iDb is passed SQLITE_MAX_ATTACHED, then all attached databases are +** checkpointed. If an error is encountered it is returned immediately - +** no attempt is made to checkpoint any remaining databases. +** +** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART. +*/ +SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){ + int rc = SQLITE_OK; /* Return code */ + int i; /* Used to iterate through attached dbs */ + int bBusy = 0; /* True if SQLITE_BUSY has been encountered */ + + assert( sqlite3_mutex_held(db->mutex) ); + assert( !pnLog || *pnLog==-1 ); + assert( !pnCkpt || *pnCkpt==-1 ); + + for(i=0; inDb && rc==SQLITE_OK; i++){ + if( i==iDb || iDb==SQLITE_MAX_ATTACHED ){ + rc = sqlite3BtreeCheckpoint(db->aDb[i].pBt, eMode, pnLog, pnCkpt); + pnLog = 0; + pnCkpt = 0; + if( rc==SQLITE_BUSY ){ + bBusy = 1; + rc = SQLITE_OK; + } } - sqlite3Parser(pEngine, 0, pParse->sLastToken, pParse); - } -#ifdef YYTRACKMAXSTACKDEPTH - sqlite3StatusSet(SQLITE_STATUS_PARSER_STACK, - sqlite3ParserStackPeak(pEngine) - ); -#endif /* YYDEBUG */ - sqlite3ParserFree(pEngine, sqlite3_free); - db->lookaside.bEnabled = enableLookaside; - if( db->mallocFailed ){ - pParse->rc = SQLITE_NOMEM; - } - if( pParse->rc!=SQLITE_OK && pParse->rc!=SQLITE_DONE && pParse->zErrMsg==0 ){ - sqlite3SetString(&pParse->zErrMsg, db, "%s", sqlite3ErrStr(pParse->rc)); - } - assert( pzErrMsg!=0 ); - if( pParse->zErrMsg ){ - *pzErrMsg = pParse->zErrMsg; - sqlite3_log(pParse->rc, "%s", *pzErrMsg); - pParse->zErrMsg = 0; - nErr++; - } - if( pParse->pVdbe && pParse->nErr>0 && pParse->nested==0 ){ - sqlite3VdbeDelete(pParse->pVdbe); - pParse->pVdbe = 0; - } -#ifndef SQLITE_OMIT_SHARED_CACHE - if( pParse->nested==0 ){ - sqlite3DbFree(db, pParse->aTableLock); - pParse->aTableLock = 0; - pParse->nTableLock = 0; } + + return (rc==SQLITE_OK && bBusy) ? SQLITE_BUSY : rc; +} +#endif /* SQLITE_OMIT_WAL */ + +/* +** This function returns true if main-memory should be used instead of +** a temporary file for transient pager files and statement journals. +** The value returned depends on the value of db->temp_store (runtime +** parameter) and the compile time value of SQLITE_TEMP_STORE. The +** following table describes the relationship between these two values +** and this functions return value. +** +** SQLITE_TEMP_STORE db->temp_store Location of temporary database +** ----------------- -------------- ------------------------------ +** 0 any file (return 0) +** 1 1 file (return 0) +** 1 2 memory (return 1) +** 1 0 file (return 0) +** 2 1 file (return 0) +** 2 2 memory (return 1) +** 2 0 memory (return 1) +** 3 any memory (return 1) +*/ +SQLITE_PRIVATE int sqlite3TempInMemory(const sqlite3 *db){ +#if SQLITE_TEMP_STORE==1 + return ( db->temp_store==2 ); #endif -#ifndef SQLITE_OMIT_VIRTUALTABLE - sqlite3_free(pParse->apVtabLock); +#if SQLITE_TEMP_STORE==2 + return ( db->temp_store!=1 ); +#endif +#if SQLITE_TEMP_STORE==3 + return 1; +#endif +#if SQLITE_TEMP_STORE<1 || SQLITE_TEMP_STORE>3 + return 0; #endif +} - if( !IN_DECLARE_VTAB ){ - /* If the pParse->declareVtab flag is set, do not delete any table - ** structure built up in pParse->pNewTable. The calling code (see vtab.c) - ** will take responsibility for freeing the Table structure. - */ - sqlite3DeleteTable(db, pParse->pNewTable); +/* +** Return UTF-8 encoded English language explanation of the most recent +** error. +*/ +SQLITE_API const char *sqlite3_errmsg(sqlite3 *db){ + const char *z; + if( !db ){ + return sqlite3ErrStr(SQLITE_NOMEM); + } + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return sqlite3ErrStr(SQLITE_MISUSE_BKPT); + } + sqlite3_mutex_enter(db->mutex); + if( db->mallocFailed ){ + z = sqlite3ErrStr(SQLITE_NOMEM); + }else{ + testcase( db->pErr==0 ); + z = (char*)sqlite3_value_text(db->pErr); + assert( !db->mallocFailed ); + if( z==0 ){ + z = sqlite3ErrStr(db->errCode); + } } + sqlite3_mutex_leave(db->mutex); + return z; +} - sqlite3DeleteTrigger(db, pParse->pNewTrigger); - for(i=pParse->nzVar-1; i>=0; i--) sqlite3DbFree(db, pParse->azVar[i]); - sqlite3DbFree(db, pParse->azVar); - sqlite3DbFree(db, pParse->aAlias); - while( pParse->pAinc ){ - AutoincInfo *p = pParse->pAinc; - pParse->pAinc = p->pNext; - sqlite3DbFree(db, p); +#ifndef SQLITE_OMIT_UTF16 +/* +** Return UTF-16 encoded English language explanation of the most recent +** error. +*/ +SQLITE_API const void *sqlite3_errmsg16(sqlite3 *db){ + static const u16 outOfMem[] = { + 'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0 + }; + static const u16 misuse[] = { + 'l', 'i', 'b', 'r', 'a', 'r', 'y', ' ', + 'r', 'o', 'u', 't', 'i', 'n', 'e', ' ', + 'c', 'a', 'l', 'l', 'e', 'd', ' ', + 'o', 'u', 't', ' ', + 'o', 'f', ' ', + 's', 'e', 'q', 'u', 'e', 'n', 'c', 'e', 0 + }; + + const void *z; + if( !db ){ + return (void *)outOfMem; } - while( pParse->pZombieTab ){ - Table *p = pParse->pZombieTab; - pParse->pZombieTab = p->pNextZombie; - sqlite3DeleteTable(db, p); + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return (void *)misuse; } - if( nErr>0 && pParse->rc==SQLITE_OK ){ - pParse->rc = SQLITE_ERROR; + sqlite3_mutex_enter(db->mutex); + if( db->mallocFailed ){ + z = (void *)outOfMem; + }else{ + z = sqlite3_value_text16(db->pErr); + if( z==0 ){ + sqlite3ErrorWithMsg(db, db->errCode, sqlite3ErrStr(db->errCode)); + z = sqlite3_value_text16(db->pErr); + } + /* A malloc() may have failed within the call to sqlite3_value_text16() + ** above. If this is the case, then the db->mallocFailed flag needs to + ** be cleared before returning. Do this directly, instead of via + ** sqlite3ApiExit(), to avoid setting the database handle error message. + */ + db->mallocFailed = 0; } - return nErr; + sqlite3_mutex_leave(db->mutex); + return z; } +#endif /* SQLITE_OMIT_UTF16 */ -/************** End of tokenize.c ********************************************/ -/************** Begin file complete.c ****************************************/ /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** An tokenizer for SQL -** -** This file contains C code that implements the sqlite3_complete() API. -** This code used to be part of the tokenizer.c source file. But by -** separating it out, the code will be automatically omitted from -** static links that do not use it. +** Return the most recent error code generated by an SQLite routine. If NULL is +** passed to this function, we assume a malloc() failed during sqlite3_open(). */ -#ifndef SQLITE_OMIT_COMPLETE +SQLITE_API int sqlite3_errcode(sqlite3 *db){ + if( db && !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( !db || db->mallocFailed ){ + return SQLITE_NOMEM; + } + return db->errCode & db->errMask; +} +SQLITE_API int sqlite3_extended_errcode(sqlite3 *db){ + if( db && !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( !db || db->mallocFailed ){ + return SQLITE_NOMEM; + } + return db->errCode; +} /* -** This is defined in tokenize.c. We just have to import the definition. +** Return a string that describes the kind of error specified in the +** argument. For now, this simply calls the internal sqlite3ErrStr() +** function. */ -#ifndef SQLITE_AMALGAMATION -#ifdef SQLITE_ASCII -#define IdChar(C) ((sqlite3CtypeMap[(unsigned char)C]&0x46)!=0) -#endif -#ifdef SQLITE_EBCDIC -SQLITE_PRIVATE const char sqlite3IsEbcdicIdChar[]; -#define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) -#endif -#endif /* SQLITE_AMALGAMATION */ - +SQLITE_API const char *sqlite3_errstr(int rc){ + return sqlite3ErrStr(rc); +} /* -** Token types used by the sqlite3_complete() routine. See the header -** comments on that procedure for additional information. +** Invalidate all cached KeyInfo objects for database connection "db" */ -#define tkSEMI 0 -#define tkWS 1 -#define tkOTHER 2 -#ifndef SQLITE_OMIT_TRIGGER -#define tkEXPLAIN 3 -#define tkCREATE 4 -#define tkTEMP 5 -#define tkTRIGGER 6 -#define tkEND 7 -#endif +static void invalidateCachedKeyInfo(sqlite3 *db){ + Db *pDb; /* A single database */ + int iDb; /* The database index number */ + HashElem *k; /* For looping over tables in pDb */ + Table *pTab; /* A table in the database */ + Index *pIdx; /* Each index */ + + for(iDb=0, pDb=db->aDb; iDbnDb; iDb++, pDb++){ + if( pDb->pBt==0 ) continue; + sqlite3BtreeEnter(pDb->pBt); + for(k=sqliteHashFirst(&pDb->pSchema->tblHash); k; k=sqliteHashNext(k)){ + pTab = (Table*)sqliteHashData(k); + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->pKeyInfo && pIdx->pKeyInfo->db==db ){ + sqlite3KeyInfoUnref(pIdx->pKeyInfo); + pIdx->pKeyInfo = 0; + } + } + } + sqlite3BtreeLeave(pDb->pBt); + } +} /* -** Return TRUE if the given SQL string ends in a semicolon. -** -** Special handling is require for CREATE TRIGGER statements. -** Whenever the CREATE TRIGGER keywords are seen, the statement -** must end with ";END;". -** -** This implementation uses a state machine with 8 states: -** -** (0) INVALID We have not yet seen a non-whitespace character. -** -** (1) START At the beginning or end of an SQL statement. This routine -** returns 1 if it ends in the START state and 0 if it ends -** in any other state. -** -** (2) NORMAL We are in the middle of statement which ends with a single -** semicolon. -** -** (3) EXPLAIN The keyword EXPLAIN has been seen at the beginning of -** a statement. -** -** (4) CREATE The keyword CREATE has been seen at the beginning of a -** statement, possibly preceeded by EXPLAIN and/or followed by -** TEMP or TEMPORARY -** -** (5) TRIGGER We are in the middle of a trigger definition that must be -** ended by a semicolon, the keyword END, and another semicolon. -** -** (6) SEMI We've seen the first semicolon in the ";END;" that occurs at -** the end of a trigger definition. -** -** (7) END We've seen the ";END" of the ";END;" that occurs at the end -** of a trigger difinition. -** -** Transitions between states above are determined by tokens extracted -** from the input. The following tokens are significant: -** -** (0) tkSEMI A semicolon. -** (1) tkWS Whitespace. -** (2) tkOTHER Any other SQL token. -** (3) tkEXPLAIN The "explain" keyword. -** (4) tkCREATE The "create" keyword. -** (5) tkTEMP The "temp" or "temporary" keyword. -** (6) tkTRIGGER The "trigger" keyword. -** (7) tkEND The "end" keyword. -** -** Whitespace never causes a state transition and is always ignored. -** This means that a SQL string of all whitespace is invalid. -** -** If we compile with SQLITE_OMIT_TRIGGER, all of the computation needed -** to recognize the end of a trigger can be omitted. All we have to do -** is look for a semicolon that is not part of an string or comment. +** Create a new collating function for database "db". The name is zName +** and the encoding is enc. */ -SQLITE_API int sqlite3_complete(const char *zSql){ - u8 state = 0; /* Current state, using numbers defined in header comment */ - u8 token; /* Value of the next token */ +static int createCollation( + sqlite3* db, + const char *zName, + u8 enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*), + void(*xDel)(void*) +){ + CollSeq *pColl; + int enc2; + + assert( sqlite3_mutex_held(db->mutex) ); -#ifndef SQLITE_OMIT_TRIGGER - /* A complex statement machine used to detect the end of a CREATE TRIGGER - ** statement. This is the normal case. + /* If SQLITE_UTF16 is specified as the encoding type, transform this + ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the + ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. */ - static const u8 trans[8][8] = { - /* Token: */ - /* State: ** SEMI WS OTHER EXPLAIN CREATE TEMP TRIGGER END */ - /* 0 INVALID: */ { 1, 0, 2, 3, 4, 2, 2, 2, }, - /* 1 START: */ { 1, 1, 2, 3, 4, 2, 2, 2, }, - /* 2 NORMAL: */ { 1, 2, 2, 2, 2, 2, 2, 2, }, - /* 3 EXPLAIN: */ { 1, 3, 3, 2, 4, 2, 2, 2, }, - /* 4 CREATE: */ { 1, 4, 2, 2, 2, 4, 5, 2, }, - /* 5 TRIGGER: */ { 6, 5, 5, 5, 5, 5, 5, 5, }, - /* 6 SEMI: */ { 6, 6, 5, 5, 5, 5, 5, 7, }, - /* 7 END: */ { 1, 7, 5, 5, 5, 5, 5, 5, }, - }; -#else - /* If triggers are not supported by this compile then the statement machine - ** used to detect the end of a statement is much simplier + enc2 = enc; + testcase( enc2==SQLITE_UTF16 ); + testcase( enc2==SQLITE_UTF16_ALIGNED ); + if( enc2==SQLITE_UTF16 || enc2==SQLITE_UTF16_ALIGNED ){ + enc2 = SQLITE_UTF16NATIVE; + } + if( enc2SQLITE_UTF16BE ){ + return SQLITE_MISUSE_BKPT; + } + + /* Check if this call is removing or replacing an existing collation + ** sequence. If so, and there are active VMs, return busy. If there + ** are no active VMs, invalidate any pre-compiled statements. */ - static const u8 trans[3][3] = { - /* Token: */ - /* State: ** SEMI WS OTHER */ - /* 0 INVALID: */ { 1, 0, 2, }, - /* 1 START: */ { 1, 1, 2, }, - /* 2 NORMAL: */ { 1, 2, 2, }, - }; -#endif /* SQLITE_OMIT_TRIGGER */ + pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 0); + if( pColl && pColl->xCmp ){ + if( db->nVdbeActive ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, + "unable to delete/modify collation sequence due to active statements"); + return SQLITE_BUSY; + } + sqlite3ExpirePreparedStatements(db); + invalidateCachedKeyInfo(db); - while( *zSql ){ - switch( *zSql ){ - case ';': { /* A semicolon */ - token = tkSEMI; - break; - } - case ' ': - case '\r': - case '\t': - case '\n': - case '\f': { /* White space is ignored */ - token = tkWS; - break; - } - case '/': { /* C-style comments */ - if( zSql[1]!='*' ){ - token = tkOTHER; - break; - } - zSql += 2; - while( zSql[0] && (zSql[0]!='*' || zSql[1]!='/') ){ zSql++; } - if( zSql[0]==0 ) return 0; - zSql++; - token = tkWS; - break; - } - case '-': { /* SQL-style comments from "--" to end of line */ - if( zSql[1]!='-' ){ - token = tkOTHER; - break; - } - while( *zSql && *zSql!='\n' ){ zSql++; } - if( *zSql==0 ) return state==1; - token = tkWS; - break; - } - case '[': { /* Microsoft-style identifiers in [...] */ - zSql++; - while( *zSql && *zSql!=']' ){ zSql++; } - if( *zSql==0 ) return 0; - token = tkOTHER; - break; - } - case '`': /* Grave-accent quoted symbols used by MySQL */ - case '"': /* single- and double-quoted strings */ - case '\'': { - int c = *zSql; - zSql++; - while( *zSql && *zSql!=c ){ zSql++; } - if( *zSql==0 ) return 0; - token = tkOTHER; - break; - } - default: { -#ifdef SQLITE_EBCDIC - unsigned char c; -#endif - if( IdChar((u8)*zSql) ){ - /* Keywords and unquoted identifiers */ - int nId; - for(nId=1; IdChar(zSql[nId]); nId++){} -#ifdef SQLITE_OMIT_TRIGGER - token = tkOTHER; -#else - switch( *zSql ){ - case 'c': case 'C': { - if( nId==6 && sqlite3StrNICmp(zSql, "create", 6)==0 ){ - token = tkCREATE; - }else{ - token = tkOTHER; - } - break; - } - case 't': case 'T': { - if( nId==7 && sqlite3StrNICmp(zSql, "trigger", 7)==0 ){ - token = tkTRIGGER; - }else if( nId==4 && sqlite3StrNICmp(zSql, "temp", 4)==0 ){ - token = tkTEMP; - }else if( nId==9 && sqlite3StrNICmp(zSql, "temporary", 9)==0 ){ - token = tkTEMP; - }else{ - token = tkOTHER; - } - break; - } - case 'e': case 'E': { - if( nId==3 && sqlite3StrNICmp(zSql, "end", 3)==0 ){ - token = tkEND; - }else -#ifndef SQLITE_OMIT_EXPLAIN - if( nId==7 && sqlite3StrNICmp(zSql, "explain", 7)==0 ){ - token = tkEXPLAIN; - }else -#endif - { - token = tkOTHER; - } - break; - } - default: { - token = tkOTHER; - break; - } + /* If collation sequence pColl was created directly by a call to + ** sqlite3_create_collation, and not generated by synthCollSeq(), + ** then any copies made by synthCollSeq() need to be invalidated. + ** Also, collation destructor - CollSeq.xDel() - function may need + ** to be called. + */ + if( (pColl->enc & ~SQLITE_UTF16_ALIGNED)==enc2 ){ + CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName); + int j; + for(j=0; j<3; j++){ + CollSeq *p = &aColl[j]; + if( p->enc==pColl->enc ){ + if( p->xDel ){ + p->xDel(p->pUser); } -#endif /* SQLITE_OMIT_TRIGGER */ - zSql += nId-1; - }else{ - /* Operators and special symbols */ - token = tkOTHER; + p->xCmp = 0; } - break; } } - state = trans[state][token]; - zSql++; } - return state==1; -} - -#ifndef SQLITE_OMIT_UTF16 -/* -** This routine is the same as the sqlite3_complete() routine described -** above, except that the parameter is required to be UTF-16 encoded, not -** UTF-8. -*/ -SQLITE_API int sqlite3_complete16(const void *zSql){ - sqlite3_value *pVal; - char const *zSql8; - int rc = SQLITE_NOMEM; -#ifndef SQLITE_OMIT_AUTOINIT - rc = sqlite3_initialize(); - if( rc ) return rc; -#endif - pVal = sqlite3ValueNew(0); - sqlite3ValueSetStr(pVal, -1, zSql, SQLITE_UTF16NATIVE, SQLITE_STATIC); - zSql8 = sqlite3ValueText(pVal, SQLITE_UTF8); - if( zSql8 ){ - rc = sqlite3_complete(zSql8); - }else{ - rc = SQLITE_NOMEM; - } - sqlite3ValueFree(pVal); - return sqlite3ApiExit(0, rc); + pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 1); + if( pColl==0 ) return SQLITE_NOMEM; + pColl->xCmp = xCompare; + pColl->pUser = pCtx; + pColl->xDel = xDel; + pColl->enc = (u8)(enc2 | (enc & SQLITE_UTF16_ALIGNED)); + sqlite3Error(db, SQLITE_OK); + return SQLITE_OK; } -#endif /* SQLITE_OMIT_UTF16 */ -#endif /* SQLITE_OMIT_COMPLETE */ -/************** End of complete.c ********************************************/ -/************** Begin file main.c ********************************************/ + /* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** Main file for the SQLite library. The routines in this file -** implement the programmer interface to the library. Routines in -** other files are for internal use by SQLite and should not be -** accessed by users of the library. +** This array defines hard upper bounds on limit values. The +** initializer must be kept in sync with the SQLITE_LIMIT_* +** #defines in sqlite3.h. */ +static const int aHardLimit[] = { + SQLITE_MAX_LENGTH, + SQLITE_MAX_SQL_LENGTH, + SQLITE_MAX_COLUMN, + SQLITE_MAX_EXPR_DEPTH, + SQLITE_MAX_COMPOUND_SELECT, + SQLITE_MAX_VDBE_OP, + SQLITE_MAX_FUNCTION_ARG, + SQLITE_MAX_ATTACHED, + SQLITE_MAX_LIKE_PATTERN_LENGTH, + SQLITE_MAX_VARIABLE_NUMBER, /* IMP: R-38091-32352 */ + SQLITE_MAX_TRIGGER_DEPTH, + SQLITE_MAX_WORKER_THREADS, +}; -#ifdef SQLITE_ENABLE_FTS3 -/************** Include fts3.h in the middle of main.c ***********************/ -/************** Begin file fts3.h ********************************************/ /* -** 2006 Oct 10 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** This header file is used by programs that want to link against the -** FTS3 library. All it does is declare the sqlite3Fts3Init() interface. +** Make sure the hard limits are set to reasonable values */ +#if SQLITE_MAX_LENGTH<100 +# error SQLITE_MAX_LENGTH must be at least 100 +#endif +#if SQLITE_MAX_SQL_LENGTH<100 +# error SQLITE_MAX_SQL_LENGTH must be at least 100 +#endif +#if SQLITE_MAX_SQL_LENGTH>SQLITE_MAX_LENGTH +# error SQLITE_MAX_SQL_LENGTH must not be greater than SQLITE_MAX_LENGTH +#endif +#if SQLITE_MAX_COMPOUND_SELECT<2 +# error SQLITE_MAX_COMPOUND_SELECT must be at least 2 +#endif +#if SQLITE_MAX_VDBE_OP<40 +# error SQLITE_MAX_VDBE_OP must be at least 40 +#endif +#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>1000 +# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 1000 +#endif +#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>125 +# error SQLITE_MAX_ATTACHED must be between 0 and 125 +#endif +#if SQLITE_MAX_LIKE_PATTERN_LENGTH<1 +# error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1 +#endif +#if SQLITE_MAX_COLUMN>32767 +# error SQLITE_MAX_COLUMN must not exceed 32767 +#endif +#if SQLITE_MAX_TRIGGER_DEPTH<1 +# error SQLITE_MAX_TRIGGER_DEPTH must be at least 1 +#endif +#if SQLITE_MAX_WORKER_THREADS<0 || SQLITE_MAX_WORKER_THREADS>50 +# error SQLITE_MAX_WORKER_THREADS must be between 0 and 50 +#endif -#if 0 -extern "C" { -#endif /* __cplusplus */ - -SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db); - -#if 0 -} /* extern "C" */ -#endif /* __cplusplus */ -/************** End of fts3.h ************************************************/ -/************** Continuing where we left off in main.c ***********************/ -#endif -#ifdef SQLITE_ENABLE_RTREE -/************** Include rtree.h in the middle of main.c **********************/ -/************** Begin file rtree.h *******************************************/ /* -** 2008 May 26 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** +** Change the value of a limit. Report the old value. +** If an invalid limit index is supplied, report -1. +** Make no changes but still report the old value if the +** new limit is negative. ** -** This header file is used by programs that want to link against the -** RTREE library. All it does is declare the sqlite3RtreeInit() interface. +** A new lower limit does not shrink existing constructs. +** It merely prevents new constructs that exceed the limit +** from forming. */ +SQLITE_API int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){ + int oldLimit; -#if 0 -extern "C" { -#endif /* __cplusplus */ -SQLITE_PRIVATE int sqlite3RtreeInit(sqlite3 *db); + /* EVIDENCE-OF: R-30189-54097 For each limit category SQLITE_LIMIT_NAME + ** there is a hard upper bound set at compile-time by a C preprocessor + ** macro called SQLITE_MAX_NAME. (The "_LIMIT_" in the name is changed to + ** "_MAX_".) + */ + assert( aHardLimit[SQLITE_LIMIT_LENGTH]==SQLITE_MAX_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_SQL_LENGTH]==SQLITE_MAX_SQL_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_COLUMN]==SQLITE_MAX_COLUMN ); + assert( aHardLimit[SQLITE_LIMIT_EXPR_DEPTH]==SQLITE_MAX_EXPR_DEPTH ); + assert( aHardLimit[SQLITE_LIMIT_COMPOUND_SELECT]==SQLITE_MAX_COMPOUND_SELECT); + assert( aHardLimit[SQLITE_LIMIT_VDBE_OP]==SQLITE_MAX_VDBE_OP ); + assert( aHardLimit[SQLITE_LIMIT_FUNCTION_ARG]==SQLITE_MAX_FUNCTION_ARG ); + assert( aHardLimit[SQLITE_LIMIT_ATTACHED]==SQLITE_MAX_ATTACHED ); + assert( aHardLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]== + SQLITE_MAX_LIKE_PATTERN_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_VARIABLE_NUMBER]==SQLITE_MAX_VARIABLE_NUMBER); + assert( aHardLimit[SQLITE_LIMIT_TRIGGER_DEPTH]==SQLITE_MAX_TRIGGER_DEPTH ); + assert( aHardLimit[SQLITE_LIMIT_WORKER_THREADS]==SQLITE_MAX_WORKER_THREADS ); + assert( SQLITE_LIMIT_WORKER_THREADS==(SQLITE_N_LIMIT-1) ); -#if 0 -} /* extern "C" */ -#endif /* __cplusplus */ -/************** End of rtree.h ***********************************************/ -/************** Continuing where we left off in main.c ***********************/ -#endif -#ifdef SQLITE_ENABLE_ICU -/************** Include sqliteicu.h in the middle of main.c ******************/ -/************** Begin file sqliteicu.h ***************************************/ + if( limitId<0 || limitId>=SQLITE_N_LIMIT ){ + return -1; + } + oldLimit = db->aLimit[limitId]; + if( newLimit>=0 ){ /* IMP: R-52476-28732 */ + if( newLimit>aHardLimit[limitId] ){ + newLimit = aHardLimit[limitId]; /* IMP: R-51463-25634 */ + } + db->aLimit[limitId] = newLimit; + } + return oldLimit; /* IMP: R-53341-35419 */ +} + /* -** 2008 May 26 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** This function is used to parse both URIs and non-URI filenames passed by the +** user to API functions sqlite3_open() or sqlite3_open_v2(), and for database +** URIs specified as part of ATTACH statements. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** The first argument to this function is the name of the VFS to use (or +** a NULL to signify the default VFS) if the URI does not contain a "vfs=xxx" +** query parameter. The second argument contains the URI (or non-URI filename) +** itself. When this function is called the *pFlags variable should contain +** the default flags to open the database handle with. The value stored in +** *pFlags may be updated before returning if the URI filename contains +** "cache=xxx" or "mode=xxx" query parameters. ** -****************************************************************************** +** If successful, SQLITE_OK is returned. In this case *ppVfs is set to point to +** the VFS that should be used to open the database file. *pzFile is set to +** point to a buffer containing the name of the file to open. It is the +** responsibility of the caller to eventually call sqlite3_free() to release +** this buffer. ** -** This header file is used by programs that want to link against the -** ICU extension. All it does is declare the sqlite3IcuInit() interface. +** If an error occurs, then an SQLite error code is returned and *pzErrMsg +** may be set to point to a buffer containing an English language error +** message. It is the responsibility of the caller to eventually release +** this buffer by calling sqlite3_free(). */ +SQLITE_PRIVATE int sqlite3ParseUri( + const char *zDefaultVfs, /* VFS to use if no "vfs=xxx" query option */ + const char *zUri, /* Nul-terminated URI to parse */ + unsigned int *pFlags, /* IN/OUT: SQLITE_OPEN_XXX flags */ + sqlite3_vfs **ppVfs, /* OUT: VFS to use */ + char **pzFile, /* OUT: Filename component of URI */ + char **pzErrMsg /* OUT: Error message (if rc!=SQLITE_OK) */ +){ + int rc = SQLITE_OK; + unsigned int flags = *pFlags; + const char *zVfs = zDefaultVfs; + char *zFile; + char c; + int nUri = sqlite3Strlen30(zUri); -#if 0 -extern "C" { -#endif /* __cplusplus */ + assert( *pzErrMsg==0 ); -SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db); + if( ((flags & SQLITE_OPEN_URI) || sqlite3GlobalConfig.bOpenUri) + && nUri>=5 && memcmp(zUri, "file:", 5)==0 /* IMP: R-57884-37496 */ + ){ + char *zOpt; + int eState; /* Parser state when parsing URI */ + int iIn; /* Input character index */ + int iOut = 0; /* Output character index */ + int nByte = nUri+2; /* Bytes of space to allocate */ -#if 0 -} /* extern "C" */ -#endif /* __cplusplus */ + /* Make sure the SQLITE_OPEN_URI flag is set to indicate to the VFS xOpen + ** method that there may be extra parameters following the file-name. */ + flags |= SQLITE_OPEN_URI; + for(iIn=0; iIn=0 && octet<256 ); + if( octet==0 ){ + /* This branch is taken when "%00" appears within the URI. In this + ** case we ignore all text in the remainder of the path, name or + ** value currently being parsed. So ignore the current character + ** and skip to the next "?", "=" or "&", as appropriate. */ + while( (c = zUri[iIn])!=0 && c!='#' + && (eState!=0 || c!='?') + && (eState!=1 || (c!='=' && c!='&')) + && (eState!=2 || c!='&') + ){ + iIn++; + } + continue; + } + c = octet; + }else if( eState==1 && (c=='&' || c=='=') ){ + if( zFile[iOut-1]==0 ){ + /* An empty option name. Ignore this option altogether. */ + while( zUri[iIn] && zUri[iIn]!='#' && zUri[iIn-1]!='&' ) iIn++; + continue; + } + if( c=='&' ){ + zFile[iOut++] = '\0'; + }else{ + eState = 2; + } + c = 0; + }else if( (eState==0 && c=='?') || (eState==2 && c=='&') ){ + c = 0; + eState = 1; + } + zFile[iOut++] = c; + } + if( eState==1 ) zFile[iOut++] = '\0'; + zFile[iOut++] = '\0'; + zFile[iOut++] = '\0'; -/* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a -** pointer to a string constant whose value is the same as the -** SQLITE_SOURCE_ID C preprocessor macro. -*/ -SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } + /* Check if there were any options specified that should be interpreted + ** here. Options that are interpreted here include "vfs" and those that + ** correspond to flags that may be passed to the sqlite3_open_v2() + ** method. */ + zOpt = &zFile[sqlite3Strlen30(zFile)+1]; + while( zOpt[0] ){ + int nOpt = sqlite3Strlen30(zOpt); + char *zVal = &zOpt[nOpt+1]; + int nVal = sqlite3Strlen30(zVal); -/* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function -** returns an integer equal to SQLITE_VERSION_NUMBER. -*/ -SQLITE_API int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; } + if( nOpt==3 && memcmp("vfs", zOpt, 3)==0 ){ + zVfs = zVal; + }else{ + struct OpenMode { + const char *z; + int mode; + } *aMode = 0; + char *zModeType = 0; + int mask = 0; + int limit = 0; -/* IMPLEMENTATION-OF: R-54823-41343 The sqlite3_threadsafe() function returns -** zero if and only if SQLite was compiled mutexing code omitted due to -** the SQLITE_THREADSAFE compile-time option being set to 0. -*/ -SQLITE_API int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; } + if( nOpt==5 && memcmp("cache", zOpt, 5)==0 ){ + static struct OpenMode aCacheMode[] = { + { "shared", SQLITE_OPEN_SHAREDCACHE }, + { "private", SQLITE_OPEN_PRIVATECACHE }, + { 0, 0 } + }; -#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE) -/* -** If the following function pointer is not NULL and if -** SQLITE_ENABLE_IOTRACE is enabled, then messages describing -** I/O active are written using this function. These messages -** are intended for debugging activity only. -*/ -SQLITE_PRIVATE void (*sqlite3IoTrace)(const char*, ...) = 0; -#endif + mask = SQLITE_OPEN_SHAREDCACHE|SQLITE_OPEN_PRIVATECACHE; + aMode = aCacheMode; + limit = mask; + zModeType = "cache"; + } + if( nOpt==4 && memcmp("mode", zOpt, 4)==0 ){ + static struct OpenMode aOpenMode[] = { + { "ro", SQLITE_OPEN_READONLY }, + { "rw", SQLITE_OPEN_READWRITE }, + { "rwc", SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE }, + { "memory", SQLITE_OPEN_MEMORY }, + { 0, 0 } + }; -/* -** If the following global variable points to a string which is the -** name of a directory, then that directory will be used to store -** temporary files. -** -** See also the "PRAGMA temp_store_directory" SQL command. -*/ -SQLITE_API char *sqlite3_temp_directory = 0; + mask = SQLITE_OPEN_READONLY | SQLITE_OPEN_READWRITE + | SQLITE_OPEN_CREATE | SQLITE_OPEN_MEMORY; + aMode = aOpenMode; + limit = mask & flags; + zModeType = "access"; + } -/* -** Initialize SQLite. -** -** This routine must be called to initialize the memory allocation, -** VFS, and mutex subsystems prior to doing any serious work with -** SQLite. But as long as you do not compile with SQLITE_OMIT_AUTOINIT -** this routine will be called automatically by key routines such as -** sqlite3_open(). -** -** This routine is a no-op except on its very first call for the process, -** or for the first call after a call to sqlite3_shutdown. -** -** The first thread to call this routine runs the initialization to -** completion. If subsequent threads call this routine before the first -** thread has finished the initialization process, then the subsequent -** threads must block until the first thread finishes with the initialization. -** -** The first thread might call this routine recursively. Recursive -** calls to this routine should not block, of course. Otherwise the -** initialization process would never complete. -** -** Let X be the first thread to enter this routine. Let Y be some other -** thread. Then while the initial invocation of this routine by X is -** incomplete, it is required that: -** -** * Calls to this routine from Y must block until the outer-most -** call by X completes. -** -** * Recursive calls to this routine from thread X return immediately -** without blocking. -*/ -SQLITE_API int sqlite3_initialize(void){ - sqlite3_mutex *pMaster; /* The main static mutex */ - int rc; /* Result code */ + if( aMode ){ + int i; + int mode = 0; + for(i=0; aMode[i].z; i++){ + const char *z = aMode[i].z; + if( nVal==sqlite3Strlen30(z) && 0==memcmp(zVal, z, nVal) ){ + mode = aMode[i].mode; + break; + } + } + if( mode==0 ){ + *pzErrMsg = sqlite3_mprintf("no such %s mode: %s", zModeType, zVal); + rc = SQLITE_ERROR; + goto parse_uri_out; + } + if( (mode & ~SQLITE_OPEN_MEMORY)>limit ){ + *pzErrMsg = sqlite3_mprintf("%s mode not allowed: %s", + zModeType, zVal); + rc = SQLITE_PERM; + goto parse_uri_out; + } + flags = (flags & ~mask) | mode; + } + } -#ifdef SQLITE_OMIT_WSD - rc = sqlite3_wsd_init(4096, 24); + zOpt = &zVal[nVal+1]; + } + + }else{ + zFile = sqlite3_malloc(nUri+2); + if( !zFile ) return SQLITE_NOMEM; + memcpy(zFile, zUri, nUri); + zFile[nUri] = '\0'; + zFile[nUri+1] = '\0'; + flags &= ~SQLITE_OPEN_URI; + } + + *ppVfs = sqlite3_vfs_find(zVfs); + if( *ppVfs==0 ){ + *pzErrMsg = sqlite3_mprintf("no such vfs: %s", zVfs); + rc = SQLITE_ERROR; + } + parse_uri_out: if( rc!=SQLITE_OK ){ - return rc; + sqlite3_free(zFile); + zFile = 0; } -#endif + *pFlags = flags; + *pzFile = zFile; + return rc; +} - /* If SQLite is already completely initialized, then this call - ** to sqlite3_initialize() should be a no-op. But the initialization - ** must be complete. So isInit must not be set until the very end - ** of this routine. - */ - if( sqlite3GlobalConfig.isInit ) return SQLITE_OK; - /* Make sure the mutex subsystem is initialized. If unable to - ** initialize the mutex subsystem, return early with the error. - ** If the system is so sick that we are unable to allocate a mutex, - ** there is not much SQLite is going to be able to do. - ** - ** The mutex subsystem must take care of serializing its own - ** initialization. - */ - rc = sqlite3MutexInit(); +/* +** This routine does the work of opening a database on behalf of +** sqlite3_open() and sqlite3_open16(). The database filename "zFilename" +** is UTF-8 encoded. +*/ +static int openDatabase( + const char *zFilename, /* Database filename UTF-8 encoded */ + sqlite3 **ppDb, /* OUT: Returned database handle */ + unsigned int flags, /* Operational flags */ + const char *zVfs /* Name of the VFS to use */ +){ + sqlite3 *db; /* Store allocated handle here */ + int rc; /* Return code */ + int isThreadsafe; /* True for threadsafe connections */ + char *zOpen = 0; /* Filename argument to pass to BtreeOpen() */ + char *zErrMsg = 0; /* Error message from sqlite3ParseUri() */ + + *ppDb = 0; +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); if( rc ) return rc; +#endif - /* Initialize the malloc() system and the recursive pInitMutex mutex. - ** This operation is protected by the STATIC_MASTER mutex. Note that - ** MutexAlloc() is called for a static mutex prior to initializing the - ** malloc subsystem - this implies that the allocation of a static - ** mutex must not require support from the malloc subsystem. + /* Only allow sensible combinations of bits in the flags argument. + ** Throw an error if any non-sense combination is used. If we + ** do not block illegal combinations here, it could trigger + ** assert() statements in deeper layers. Sensible combinations + ** are: + ** + ** 1: SQLITE_OPEN_READONLY + ** 2: SQLITE_OPEN_READWRITE + ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE */ - pMaster = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); - sqlite3_mutex_enter(pMaster); - sqlite3GlobalConfig.isMutexInit = 1; - if( !sqlite3GlobalConfig.isMallocInit ){ - rc = sqlite3MallocInit(); - } - if( rc==SQLITE_OK ){ - sqlite3GlobalConfig.isMallocInit = 1; - if( !sqlite3GlobalConfig.pInitMutex ){ - sqlite3GlobalConfig.pInitMutex = - sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); - if( sqlite3GlobalConfig.bCoreMutex && !sqlite3GlobalConfig.pInitMutex ){ - rc = SQLITE_NOMEM; - } - } - } - if( rc==SQLITE_OK ){ - sqlite3GlobalConfig.nRefInitMutex++; + assert( SQLITE_OPEN_READONLY == 0x01 ); + assert( SQLITE_OPEN_READWRITE == 0x02 ); + assert( SQLITE_OPEN_CREATE == 0x04 ); + testcase( (1<<(flags&7))==0x02 ); /* READONLY */ + testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ + testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ + if( ((1<<(flags&7)) & 0x46)==0 ){ + return SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */ } - sqlite3_mutex_leave(pMaster); - /* If rc is not SQLITE_OK at this point, then either the malloc - ** subsystem could not be initialized or the system failed to allocate - ** the pInitMutex mutex. Return an error in either case. */ - if( rc!=SQLITE_OK ){ - return rc; + if( sqlite3GlobalConfig.bCoreMutex==0 ){ + isThreadsafe = 0; + }else if( flags & SQLITE_OPEN_NOMUTEX ){ + isThreadsafe = 0; + }else if( flags & SQLITE_OPEN_FULLMUTEX ){ + isThreadsafe = 1; + }else{ + isThreadsafe = sqlite3GlobalConfig.bFullMutex; + } + if( flags & SQLITE_OPEN_PRIVATECACHE ){ + flags &= ~SQLITE_OPEN_SHAREDCACHE; + }else if( sqlite3GlobalConfig.sharedCacheEnabled ){ + flags |= SQLITE_OPEN_SHAREDCACHE; } - /* Do the rest of the initialization under the recursive mutex so - ** that we will be able to handle recursive calls into - ** sqlite3_initialize(). The recursive calls normally come through - ** sqlite3_os_init() when it invokes sqlite3_vfs_register(), but other - ** recursive calls might also be possible. - ** - ** IMPLEMENTATION-OF: R-00140-37445 SQLite automatically serializes calls - ** to the xInit method, so the xInit method need not be threadsafe. + /* Remove harmful bits from the flags parameter ** - ** The following mutex is what serializes access to the appdef pcache xInit - ** methods. The sqlite3_pcache_methods.xInit() all is embedded in the - ** call to sqlite3PcacheInitialize(). + ** The SQLITE_OPEN_NOMUTEX and SQLITE_OPEN_FULLMUTEX flags were + ** dealt with in the previous code block. Besides these, the only + ** valid input flags for sqlite3_open_v2() are SQLITE_OPEN_READONLY, + ** SQLITE_OPEN_READWRITE, SQLITE_OPEN_CREATE, SQLITE_OPEN_SHAREDCACHE, + ** SQLITE_OPEN_PRIVATECACHE, and some reserved bits. Silently mask + ** off all other flags. */ - sqlite3_mutex_enter(sqlite3GlobalConfig.pInitMutex); - if( sqlite3GlobalConfig.isInit==0 && sqlite3GlobalConfig.inProgress==0 ){ - FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions); - sqlite3GlobalConfig.inProgress = 1; - memset(pHash, 0, sizeof(sqlite3GlobalFunctions)); - sqlite3RegisterGlobalFunctions(); - if( sqlite3GlobalConfig.isPCacheInit==0 ){ - rc = sqlite3PcacheInitialize(); - } - if( rc==SQLITE_OK ){ - sqlite3GlobalConfig.isPCacheInit = 1; - rc = sqlite3OsInit(); - } - if( rc==SQLITE_OK ){ - sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage, - sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage); - sqlite3GlobalConfig.isInit = 1; - } - sqlite3GlobalConfig.inProgress = 0; - } - sqlite3_mutex_leave(sqlite3GlobalConfig.pInitMutex); + flags &= ~( SQLITE_OPEN_DELETEONCLOSE | + SQLITE_OPEN_EXCLUSIVE | + SQLITE_OPEN_MAIN_DB | + SQLITE_OPEN_TEMP_DB | + SQLITE_OPEN_TRANSIENT_DB | + SQLITE_OPEN_MAIN_JOURNAL | + SQLITE_OPEN_TEMP_JOURNAL | + SQLITE_OPEN_SUBJOURNAL | + SQLITE_OPEN_MASTER_JOURNAL | + SQLITE_OPEN_NOMUTEX | + SQLITE_OPEN_FULLMUTEX | + SQLITE_OPEN_WAL + ); - /* Go back under the static mutex and clean up the recursive - ** mutex to prevent a resource leak. - */ - sqlite3_mutex_enter(pMaster); - sqlite3GlobalConfig.nRefInitMutex--; - if( sqlite3GlobalConfig.nRefInitMutex<=0 ){ - assert( sqlite3GlobalConfig.nRefInitMutex==0 ); - sqlite3_mutex_free(sqlite3GlobalConfig.pInitMutex); - sqlite3GlobalConfig.pInitMutex = 0; + /* Allocate the sqlite data structure */ + db = sqlite3MallocZero( sizeof(sqlite3) ); + if( db==0 ) goto opendb_out; + if( isThreadsafe ){ + db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); + if( db->mutex==0 ){ + sqlite3_free(db); + db = 0; + goto opendb_out; + } } - sqlite3_mutex_leave(pMaster); + sqlite3_mutex_enter(db->mutex); + db->errMask = 0xff; + db->nDb = 2; + db->magic = SQLITE_MAGIC_BUSY; + db->aDb = db->aDbStatic; - /* The following is just a sanity check to make sure SQLite has - ** been compiled correctly. It is important to run this code, but - ** we don't want to run it too often and soak up CPU cycles for no - ** reason. So we run it once during initialization. - */ -#ifndef NDEBUG -#ifndef SQLITE_OMIT_FLOATING_POINT - /* This section of code's only "output" is via assert() statements. */ - if ( rc==SQLITE_OK ){ - u64 x = (((u64)1)<<63)-1; - double y; - assert(sizeof(x)==8); - assert(sizeof(x)==sizeof(y)); - memcpy(&y, &x, 8); - assert( sqlite3IsNaN(y) ); - } + assert( sizeof(db->aLimit)==sizeof(aHardLimit) ); + memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit)); + db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS; + db->autoCommit = 1; + db->nextAutovac = -1; + db->szMmap = sqlite3GlobalConfig.szMmap; + db->nextPagesize = 0; + db->nMaxSorterMmap = 0x7FFFFFFF; + db->flags |= SQLITE_ShortColNames | SQLITE_EnableTrigger | SQLITE_CacheSpill +#if !defined(SQLITE_DEFAULT_AUTOMATIC_INDEX) || SQLITE_DEFAULT_AUTOMATIC_INDEX + | SQLITE_AutoIndex +#endif +#if SQLITE_DEFAULT_FILE_FORMAT<4 + | SQLITE_LegacyFileFmt #endif +#ifdef SQLITE_ENABLE_LOAD_EXTENSION + | SQLITE_LoadExtension +#endif +#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS + | SQLITE_RecTriggers +#endif +#if defined(SQLITE_DEFAULT_FOREIGN_KEYS) && SQLITE_DEFAULT_FOREIGN_KEYS + | SQLITE_ForeignKeys +#endif + ; + sqlite3HashInit(&db->aCollSeq); +#ifndef SQLITE_OMIT_VIRTUALTABLE + sqlite3HashInit(&db->aModule); #endif - return rc; -} - -/* -** Undo the effects of sqlite3_initialize(). Must not be called while -** there are outstanding database connections or memory allocations or -** while any part of SQLite is otherwise in use in any thread. This -** routine is not threadsafe. But it is safe to invoke this routine -** on when SQLite is already shut down. If SQLite is already shut down -** when this routine is invoked, then this routine is a harmless no-op. -*/ -SQLITE_API int sqlite3_shutdown(void){ - if( sqlite3GlobalConfig.isInit ){ - sqlite3_os_end(); - sqlite3_reset_auto_extension(); - sqlite3GlobalConfig.isInit = 0; - } - if( sqlite3GlobalConfig.isPCacheInit ){ - sqlite3PcacheShutdown(); - sqlite3GlobalConfig.isPCacheInit = 0; - } - if( sqlite3GlobalConfig.isMallocInit ){ - sqlite3MallocEnd(); - sqlite3GlobalConfig.isMallocInit = 0; - } - if( sqlite3GlobalConfig.isMutexInit ){ - sqlite3MutexEnd(); - sqlite3GlobalConfig.isMutexInit = 0; + /* Add the default collation sequence BINARY. BINARY works for both UTF-8 + ** and UTF-16, so add a version for each to avoid any unnecessary + ** conversions. The only error that can occur here is a malloc() failure. + */ + createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc, 0); + createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc, 0); + createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc, 0); + createCollation(db, "RTRIM", SQLITE_UTF8, (void*)1, binCollFunc, 0); + if( db->mallocFailed ){ + goto opendb_out; } + db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 0); + assert( db->pDfltColl!=0 ); - return SQLITE_OK; -} - -/* -** This API allows applications to modify the global configuration of -** the SQLite library at run-time. -** -** This routine should only be called when there are no outstanding -** database connections or memory allocations. This routine is not -** threadsafe. Failure to heed these warnings can lead to unpredictable -** behavior. -*/ -SQLITE_API int sqlite3_config(int op, ...){ - va_list ap; - int rc = SQLITE_OK; - - /* sqlite3_config() shall return SQLITE_MISUSE if it is invoked while - ** the SQLite library is in use. */ - if( sqlite3GlobalConfig.isInit ) return SQLITE_MISUSE_BKPT; + /* Also add a UTF-8 case-insensitive collation sequence. */ + createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0); - va_start(ap, op); - switch( op ){ + /* Parse the filename/URI argument. */ + db->openFlags = flags; + rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; + sqlite3ErrorWithMsg(db, rc, zErrMsg ? "%s" : 0, zErrMsg); + sqlite3_free(zErrMsg); + goto opendb_out; + } - /* Mutex configuration options are only available in a threadsafe - ** compile. - */ -#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 - case SQLITE_CONFIG_SINGLETHREAD: { - /* Disable all mutexing */ - sqlite3GlobalConfig.bCoreMutex = 0; - sqlite3GlobalConfig.bFullMutex = 0; - break; - } - case SQLITE_CONFIG_MULTITHREAD: { - /* Disable mutexing of database connections */ - /* Enable mutexing of core data structures */ - sqlite3GlobalConfig.bCoreMutex = 1; - sqlite3GlobalConfig.bFullMutex = 0; - break; - } - case SQLITE_CONFIG_SERIALIZED: { - /* Enable all mutexing */ - sqlite3GlobalConfig.bCoreMutex = 1; - sqlite3GlobalConfig.bFullMutex = 1; - break; - } - case SQLITE_CONFIG_MUTEX: { - /* Specify an alternative mutex implementation */ - sqlite3GlobalConfig.mutex = *va_arg(ap, sqlite3_mutex_methods*); - break; - } - case SQLITE_CONFIG_GETMUTEX: { - /* Retrieve the current mutex implementation */ - *va_arg(ap, sqlite3_mutex_methods*) = sqlite3GlobalConfig.mutex; - break; + /* Open the backend database driver */ + rc = sqlite3BtreeOpen(db->pVfs, zOpen, db, &db->aDb[0].pBt, 0, + flags | SQLITE_OPEN_MAIN_DB); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_IOERR_NOMEM ){ + rc = SQLITE_NOMEM; } -#endif + sqlite3Error(db, rc); + goto opendb_out; + } + sqlite3BtreeEnter(db->aDb[0].pBt); + db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt); + sqlite3BtreeLeave(db->aDb[0].pBt); + db->aDb[1].pSchema = sqlite3SchemaGet(db, 0); + /* The default safety_level for the main database is 'full'; for the temp + ** database it is 'NONE'. This matches the pager layer defaults. + */ + db->aDb[0].zName = "main"; + db->aDb[0].safety_level = 3; + db->aDb[1].zName = "temp"; + db->aDb[1].safety_level = 1; - case SQLITE_CONFIG_MALLOC: { - /* Specify an alternative malloc implementation */ - sqlite3GlobalConfig.m = *va_arg(ap, sqlite3_mem_methods*); - break; - } - case SQLITE_CONFIG_GETMALLOC: { - /* Retrieve the current malloc() implementation */ - if( sqlite3GlobalConfig.m.xMalloc==0 ) sqlite3MemSetDefault(); - *va_arg(ap, sqlite3_mem_methods*) = sqlite3GlobalConfig.m; - break; - } - case SQLITE_CONFIG_MEMSTATUS: { - /* Enable or disable the malloc status collection */ - sqlite3GlobalConfig.bMemstat = va_arg(ap, int); - break; - } - case SQLITE_CONFIG_SCRATCH: { - /* Designate a buffer for scratch memory space */ - sqlite3GlobalConfig.pScratch = va_arg(ap, void*); - sqlite3GlobalConfig.szScratch = va_arg(ap, int); - sqlite3GlobalConfig.nScratch = va_arg(ap, int); - break; - } - case SQLITE_CONFIG_PAGECACHE: { - /* Designate a buffer for page cache memory space */ - sqlite3GlobalConfig.pPage = va_arg(ap, void*); - sqlite3GlobalConfig.szPage = va_arg(ap, int); - sqlite3GlobalConfig.nPage = va_arg(ap, int); - break; - } + db->magic = SQLITE_MAGIC_OPEN; + if( db->mallocFailed ){ + goto opendb_out; + } - case SQLITE_CONFIG_PCACHE: { - /* Specify an alternative page cache implementation */ - sqlite3GlobalConfig.pcache = *va_arg(ap, sqlite3_pcache_methods*); - break; - } + /* Register all built-in functions, but do not attempt to read the + ** database schema yet. This is delayed until the first time the database + ** is accessed. + */ + sqlite3Error(db, SQLITE_OK); + sqlite3RegisterBuiltinFunctions(db); - case SQLITE_CONFIG_GETPCACHE: { - if( sqlite3GlobalConfig.pcache.xInit==0 ){ - sqlite3PCacheSetDefault(); - } - *va_arg(ap, sqlite3_pcache_methods*) = sqlite3GlobalConfig.pcache; - break; + /* Load automatic extensions - extensions that have been registered + ** using the sqlite3_automatic_extension() API. + */ + rc = sqlite3_errcode(db); + if( rc==SQLITE_OK ){ + sqlite3AutoLoadExtensions(db); + rc = sqlite3_errcode(db); + if( rc!=SQLITE_OK ){ + goto opendb_out; } + } -#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5) - case SQLITE_CONFIG_HEAP: { - /* Designate a buffer for heap memory space */ - sqlite3GlobalConfig.pHeap = va_arg(ap, void*); - sqlite3GlobalConfig.nHeap = va_arg(ap, int); - sqlite3GlobalConfig.mnReq = va_arg(ap, int); +#ifdef SQLITE_ENABLE_FTS1 + if( !db->mallocFailed ){ + extern int sqlite3Fts1Init(sqlite3*); + rc = sqlite3Fts1Init(db); + } +#endif - if( sqlite3GlobalConfig.mnReq<1 ){ - sqlite3GlobalConfig.mnReq = 1; - }else if( sqlite3GlobalConfig.mnReq>(1<<12) ){ - /* cap min request size at 2^12 */ - sqlite3GlobalConfig.mnReq = (1<<12); - } +#ifdef SQLITE_ENABLE_FTS2 + if( !db->mallocFailed && rc==SQLITE_OK ){ + extern int sqlite3Fts2Init(sqlite3*); + rc = sqlite3Fts2Init(db); + } +#endif - if( sqlite3GlobalConfig.pHeap==0 ){ - /* If the heap pointer is NULL, then restore the malloc implementation - ** back to NULL pointers too. This will cause the malloc to go - ** back to its default implementation when sqlite3_initialize() is - ** run. - */ - memset(&sqlite3GlobalConfig.m, 0, sizeof(sqlite3GlobalConfig.m)); - }else{ - /* The heap pointer is not NULL, then install one of the - ** mem5.c/mem3.c methods. If neither ENABLE_MEMSYS3 nor - ** ENABLE_MEMSYS5 is defined, return an error. - */ -#ifdef SQLITE_ENABLE_MEMSYS3 - sqlite3GlobalConfig.m = *sqlite3MemGetMemsys3(); +#ifdef SQLITE_ENABLE_FTS3 + if( !db->mallocFailed && rc==SQLITE_OK ){ + rc = sqlite3Fts3Init(db); + } #endif -#ifdef SQLITE_ENABLE_MEMSYS5 - sqlite3GlobalConfig.m = *sqlite3MemGetMemsys5(); + +#ifdef SQLITE_ENABLE_ICU + if( !db->mallocFailed && rc==SQLITE_OK ){ + rc = sqlite3IcuInit(db); + } #endif - } - break; - } + +#ifdef SQLITE_ENABLE_RTREE + if( !db->mallocFailed && rc==SQLITE_OK){ + rc = sqlite3RtreeInit(db); + } #endif - case SQLITE_CONFIG_LOOKASIDE: { - sqlite3GlobalConfig.szLookaside = va_arg(ap, int); - sqlite3GlobalConfig.nLookaside = va_arg(ap, int); - break; - } - - /* Record a pointer to the logger funcction and its first argument. - ** The default is NULL. Logging is disabled if the function pointer is - ** NULL. - */ - case SQLITE_CONFIG_LOG: { - /* MSVC is picky about pulling func ptrs from va lists. - ** http://support.microsoft.com/kb/47961 - ** sqlite3GlobalConfig.xLog = va_arg(ap, void(*)(void*,int,const char*)); - */ - typedef void(*LOGFUNC_t)(void*,int,const char*); - sqlite3GlobalConfig.xLog = va_arg(ap, LOGFUNC_t); - sqlite3GlobalConfig.pLogArg = va_arg(ap, void*); - break; - } + /* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking + ** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking + ** mode. Doing nothing at all also makes NORMAL the default. + */ +#ifdef SQLITE_DEFAULT_LOCKING_MODE + db->dfltLockMode = SQLITE_DEFAULT_LOCKING_MODE; + sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt), + SQLITE_DEFAULT_LOCKING_MODE); +#endif - case SQLITE_CONFIG_URI: { - sqlite3GlobalConfig.bOpenUri = va_arg(ap, int); - break; - } + if( rc ) sqlite3Error(db, rc); - default: { - rc = SQLITE_ERROR; - break; - } + /* Enable the lookaside-malloc subsystem */ + setupLookaside(db, 0, sqlite3GlobalConfig.szLookaside, + sqlite3GlobalConfig.nLookaside); + + sqlite3_wal_autocheckpoint(db, SQLITE_DEFAULT_WAL_AUTOCHECKPOINT); + +opendb_out: + sqlite3_free(zOpen); + if( db ){ + assert( db->mutex!=0 || isThreadsafe==0 || sqlite3GlobalConfig.bFullMutex==0 ); + sqlite3_mutex_leave(db->mutex); } - va_end(ap); - return rc; + rc = sqlite3_errcode(db); + assert( db!=0 || rc==SQLITE_NOMEM ); + if( rc==SQLITE_NOMEM ){ + sqlite3_close(db); + db = 0; + }else if( rc!=SQLITE_OK ){ + db->magic = SQLITE_MAGIC_SICK; + } + *ppDb = db; +#ifdef SQLITE_ENABLE_SQLLOG + if( sqlite3GlobalConfig.xSqllog ){ + /* Opening a db handle. Fourth parameter is passed 0. */ + void *pArg = sqlite3GlobalConfig.pSqllogArg; + sqlite3GlobalConfig.xSqllog(pArg, db, zFilename, 0); + } +#endif + return sqlite3ApiExit(0, rc); } /* -** Set up the lookaside buffers for a database connection. -** Return SQLITE_OK on success. -** If lookaside is already active, return SQLITE_BUSY. -** -** The sz parameter is the number of bytes in each lookaside slot. -** The cnt parameter is the number of slots. If pStart is NULL the -** space for the lookaside memory is obtained from sqlite3_malloc(). -** If pStart is not NULL then it is sz*cnt bytes of memory to use for -** the lookaside memory. +** Open a new database handle. */ -static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ - void *pStart; - if( db->lookaside.nOut ){ - return SQLITE_BUSY; - } - /* Free any existing lookaside buffer for this handle before - ** allocating a new one so we don't have to have space for - ** both at the same time. - */ - if( db->lookaside.bMalloced ){ - sqlite3_free(db->lookaside.pStart); - } - /* The size of a lookaside slot needs to be larger than a pointer - ** to be useful. - */ - if( sz<=(int)sizeof(LookasideSlot*) ) sz = 0; - if( cnt<0 ) cnt = 0; - if( sz==0 || cnt==0 ){ - sz = 0; - pStart = 0; - }else if( pBuf==0 ){ - sz = ROUNDDOWN8(sz); /* IMP: R-33038-09382 */ - sqlite3BeginBenignMalloc(); - pStart = sqlite3Malloc( sz*cnt ); /* IMP: R-61949-35727 */ - sqlite3EndBenignMalloc(); - }else{ - sz = ROUNDDOWN8(sz); /* IMP: R-33038-09382 */ - pStart = pBuf; - } - db->lookaside.pStart = pStart; - db->lookaside.pFree = 0; - db->lookaside.sz = (u16)sz; - if( pStart ){ - int i; - LookasideSlot *p; - assert( sz > (int)sizeof(LookasideSlot*) ); - p = (LookasideSlot*)pStart; - for(i=cnt-1; i>=0; i--){ - p->pNext = db->lookaside.pFree; - db->lookaside.pFree = p; - p = (LookasideSlot*)&((u8*)p)[sz]; +SQLITE_API int sqlite3_open( + const char *zFilename, + sqlite3 **ppDb +){ + return openDatabase(zFilename, ppDb, + SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); +} +SQLITE_API int sqlite3_open_v2( + const char *filename, /* Database filename (UTF-8) */ + sqlite3 **ppDb, /* OUT: SQLite db handle */ + int flags, /* Flags */ + const char *zVfs /* Name of VFS module to use */ +){ + return openDatabase(filename, ppDb, (unsigned int)flags, zVfs); +} + +#ifndef SQLITE_OMIT_UTF16 +/* +** Open a new database handle. +*/ +SQLITE_API int sqlite3_open16( + const void *zFilename, + sqlite3 **ppDb +){ + char const *zFilename8; /* zFilename encoded in UTF-8 instead of UTF-16 */ + sqlite3_value *pVal; + int rc; + + assert( zFilename ); + assert( ppDb ); + *ppDb = 0; +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); + if( rc ) return rc; +#endif + pVal = sqlite3ValueNew(0); + sqlite3ValueSetStr(pVal, -1, zFilename, SQLITE_UTF16NATIVE, SQLITE_STATIC); + zFilename8 = sqlite3ValueText(pVal, SQLITE_UTF8); + if( zFilename8 ){ + rc = openDatabase(zFilename8, ppDb, + SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); + assert( *ppDb || rc==SQLITE_NOMEM ); + if( rc==SQLITE_OK && !DbHasProperty(*ppDb, 0, DB_SchemaLoaded) ){ + ENC(*ppDb) = SQLITE_UTF16NATIVE; } - db->lookaside.pEnd = p; - db->lookaside.bEnabled = 1; - db->lookaside.bMalloced = pBuf==0 ?1:0; }else{ - db->lookaside.pEnd = 0; - db->lookaside.bEnabled = 0; - db->lookaside.bMalloced = 0; + rc = SQLITE_NOMEM; } - return SQLITE_OK; + sqlite3ValueFree(pVal); + + return sqlite3ApiExit(0, rc); } +#endif /* SQLITE_OMIT_UTF16 */ /* -** Return the mutex associated with a database connection. +** Register a new collation sequence with the database handle db. */ -SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){ - return db->mutex; +SQLITE_API int sqlite3_create_collation( + sqlite3* db, + const char *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*) +){ + int rc; + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + rc = createCollation(db, zName, (u8)enc, pCtx, xCompare, 0); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; } /* -** Configuration settings for an individual database connection +** Register a new collation sequence with the database handle db. */ -SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){ - va_list ap; +SQLITE_API int sqlite3_create_collation_v2( + sqlite3* db, + const char *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*), + void(*xDel)(void*) +){ int rc; - va_start(ap, op); - switch( op ){ - case SQLITE_DBCONFIG_LOOKASIDE: { - void *pBuf = va_arg(ap, void*); /* IMP: R-26835-10964 */ - int sz = va_arg(ap, int); /* IMP: R-47871-25994 */ - int cnt = va_arg(ap, int); /* IMP: R-04460-53386 */ - rc = setupLookaside(db, pBuf, sz, cnt); - break; - } - default: { - static const struct { - int op; /* The opcode */ - u32 mask; /* Mask of the bit in sqlite3.flags to set/clear */ - } aFlagOp[] = { - { SQLITE_DBCONFIG_ENABLE_FKEY, SQLITE_ForeignKeys }, - { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger }, - }; - unsigned int i; - rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ - for(i=0; iflags; - if( onoff>0 ){ - db->flags |= aFlagOp[i].mask; - }else if( onoff==0 ){ - db->flags &= ~aFlagOp[i].mask; - } - if( oldFlags!=db->flags ){ - sqlite3ExpirePreparedStatements(db); - } - if( pRes ){ - *pRes = (db->flags & aFlagOp[i].mask)!=0; - } - rc = SQLITE_OK; - break; - } - } - break; - } - } - va_end(ap); + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + rc = createCollation(db, zName, (u8)enc, pCtx, xCompare, xDel); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); return rc; } +#ifndef SQLITE_OMIT_UTF16 +/* +** Register a new collation sequence with the database handle db. +*/ +SQLITE_API int sqlite3_create_collation16( + sqlite3* db, + const void *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*) +){ + int rc = SQLITE_OK; + char *zName8; + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + zName8 = sqlite3Utf16to8(db, zName, -1, SQLITE_UTF16NATIVE); + if( zName8 ){ + rc = createCollation(db, zName8, (u8)enc, pCtx, xCompare, 0); + sqlite3DbFree(db, zName8); + } + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} +#endif /* SQLITE_OMIT_UTF16 */ /* -** Return true if the buffer z[0..n-1] contains all spaces. +** Register a collation sequence factory callback with the database handle +** db. Replace any previously installed collation sequence factory. */ -static int allSpaces(const char *z, int n){ - while( n>0 && z[n-1]==' ' ){ n--; } - return n==0; +SQLITE_API int sqlite3_collation_needed( + sqlite3 *db, + void *pCollNeededArg, + void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*) +){ + sqlite3_mutex_enter(db->mutex); + db->xCollNeeded = xCollNeeded; + db->xCollNeeded16 = 0; + db->pCollNeededArg = pCollNeededArg; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; } +#ifndef SQLITE_OMIT_UTF16 /* -** This is the default collating function named "BINARY" which is always -** available. -** -** If the padFlag argument is not NULL then space padding at the end -** of strings is ignored. This implements the RTRIM collation. +** Register a collation sequence factory callback with the database handle +** db. Replace any previously installed collation sequence factory. */ -static int binCollFunc( - void *padFlag, - int nKey1, const void *pKey1, - int nKey2, const void *pKey2 +SQLITE_API int sqlite3_collation_needed16( + sqlite3 *db, + void *pCollNeededArg, + void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*) ){ - int rc, n; - n = nKey1mutex); + db->xCollNeeded = 0; + db->xCollNeeded16 = xCollNeeded16; + db->pCollNeededArg = pCollNeededArg; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} +#endif /* SQLITE_OMIT_UTF16 */ + +#ifndef SQLITE_OMIT_DEPRECATED +/* +** This function is now an anachronism. It used to be used to recover from a +** malloc() failure, but SQLite now does this automatically. +*/ +SQLITE_API int sqlite3_global_recover(void){ + return SQLITE_OK; +} +#endif + +/* +** Test to see whether or not the database connection is in autocommit +** mode. Return TRUE if it is and FALSE if not. Autocommit mode is on +** by default. Autocommit is disabled by a BEGIN statement and reenabled +** by the next COMMIT or ROLLBACK. +*/ +SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){ + return db->autoCommit; } /* -** Another built-in collating sequence: NOCASE. +** The following routines are substitutes for constants SQLITE_CORRUPT, +** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_IOERR and possibly other error +** constants. They serve two purposes: ** -** This collating sequence is intended to be used for "case independant -** comparison". SQLite's knowledge of upper and lower case equivalents -** extends only to the 26 characters used in the English language. +** 1. Serve as a convenient place to set a breakpoint in a debugger +** to detect when version error conditions occurs. ** -** At the moment there is only a UTF-8 implementation. +** 2. Invoke sqlite3_log() to provide the source code location where +** a low-level error is first detected. */ -static int nocaseCollatingFunc( - void *NotUsed, - int nKey1, const void *pKey1, - int nKey2, const void *pKey2 -){ - int r = sqlite3StrNICmp( - (const char *)pKey1, (const char *)pKey2, (nKey1lastRowid; +SQLITE_API void sqlite3_thread_cleanup(void){ } +#endif /* -** Return the number of changes in the most recent call to sqlite3_exec(). +** Return meta information about a specific column of a database table. +** See comment in sqlite3.h (sqlite.h.in) for details. */ -SQLITE_API int sqlite3_changes(sqlite3 *db){ - return db->nChange; +#ifdef SQLITE_ENABLE_COLUMN_METADATA +SQLITE_API int sqlite3_table_column_metadata( + sqlite3 *db, /* Connection handle */ + const char *zDbName, /* Database name or NULL */ + const char *zTableName, /* Table name */ + const char *zColumnName, /* Column name */ + char const **pzDataType, /* OUTPUT: Declared data type */ + char const **pzCollSeq, /* OUTPUT: Collation sequence name */ + int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ + int *pPrimaryKey, /* OUTPUT: True if column part of PK */ + int *pAutoinc /* OUTPUT: True if column is auto-increment */ +){ + int rc; + char *zErrMsg = 0; + Table *pTab = 0; + Column *pCol = 0; + int iCol; + + char const *zDataType = 0; + char const *zCollSeq = 0; + int notnull = 0; + int primarykey = 0; + int autoinc = 0; + + /* Ensure the database schema has been loaded */ + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + rc = sqlite3Init(db, &zErrMsg); + if( SQLITE_OK!=rc ){ + goto error_out; + } + + /* Locate the table in question */ + pTab = sqlite3FindTable(db, zTableName, zDbName); + if( !pTab || pTab->pSelect ){ + pTab = 0; + goto error_out; + } + + /* Find the column for which info is requested */ + if( sqlite3IsRowid(zColumnName) ){ + iCol = pTab->iPKey; + if( iCol>=0 ){ + pCol = &pTab->aCol[iCol]; + } + }else{ + for(iCol=0; iColnCol; iCol++){ + pCol = &pTab->aCol[iCol]; + if( 0==sqlite3StrICmp(pCol->zName, zColumnName) ){ + break; + } + } + if( iCol==pTab->nCol ){ + pTab = 0; + goto error_out; + } + } + + /* The following block stores the meta information that will be returned + ** to the caller in local variables zDataType, zCollSeq, notnull, primarykey + ** and autoinc. At this point there are two possibilities: + ** + ** 1. The specified column name was rowid", "oid" or "_rowid_" + ** and there is no explicitly declared IPK column. + ** + ** 2. The table is not a view and the column name identified an + ** explicitly declared column. Copy meta information from *pCol. + */ + if( pCol ){ + zDataType = pCol->zType; + zCollSeq = pCol->zColl; + notnull = pCol->notNull!=0; + primarykey = (pCol->colFlags & COLFLAG_PRIMKEY)!=0; + autoinc = pTab->iPKey==iCol && (pTab->tabFlags & TF_Autoincrement)!=0; + }else{ + zDataType = "INTEGER"; + primarykey = 1; + } + if( !zCollSeq ){ + zCollSeq = "BINARY"; + } + +error_out: + sqlite3BtreeLeaveAll(db); + + /* Whether the function call succeeded or failed, set the output parameters + ** to whatever their local counterparts contain. If an error did occur, + ** this has the effect of zeroing all output parameters. + */ + if( pzDataType ) *pzDataType = zDataType; + if( pzCollSeq ) *pzCollSeq = zCollSeq; + if( pNotNull ) *pNotNull = notnull; + if( pPrimaryKey ) *pPrimaryKey = primarykey; + if( pAutoinc ) *pAutoinc = autoinc; + + if( SQLITE_OK==rc && !pTab ){ + sqlite3DbFree(db, zErrMsg); + zErrMsg = sqlite3MPrintf(db, "no such table column: %s.%s", zTableName, + zColumnName); + rc = SQLITE_ERROR; + } + sqlite3ErrorWithMsg(db, rc, (zErrMsg?"%s":0), zErrMsg); + sqlite3DbFree(db, zErrMsg); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; } +#endif /* -** Return the number of changes since the database handle was opened. +** Sleep for a little while. Return the amount of time slept. */ -SQLITE_API int sqlite3_total_changes(sqlite3 *db){ - return db->nTotalChange; +SQLITE_API int sqlite3_sleep(int ms){ + sqlite3_vfs *pVfs; + int rc; + pVfs = sqlite3_vfs_find(0); + if( pVfs==0 ) return 0; + + /* This function works in milliseconds, but the underlying OsSleep() + ** API uses microseconds. Hence the 1000's. + */ + rc = (sqlite3OsSleep(pVfs, 1000*ms)/1000); + return rc; } /* -** Close all open savepoints. This function only manipulates fields of the -** database handle object, it does not close any savepoints that may be open -** at the b-tree/pager level. +** Enable or disable the extended result codes. */ -SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *db){ - while( db->pSavepoint ){ - Savepoint *pTmp = db->pSavepoint; - db->pSavepoint = pTmp->pNext; - sqlite3DbFree(db, pTmp); - } - db->nSavepoint = 0; - db->nStatement = 0; - db->isTransactionSavepoint = 0; +SQLITE_API int sqlite3_extended_result_codes(sqlite3 *db, int onoff){ + sqlite3_mutex_enter(db->mutex); + db->errMask = onoff ? 0xffffffff : 0xff; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; } /* -** Invoke the destructor function associated with FuncDef p, if any. Except, -** if this is not the last copy of the function, do not invoke it. Multiple -** copies of a single function are created when create_function() is called -** with SQLITE_ANY as the encoding. +** Invoke the xFileControl method on a particular database. */ -static void functionDestroy(sqlite3 *db, FuncDef *p){ - FuncDestructor *pDestructor = p->pDestructor; - if( pDestructor ){ - pDestructor->nRef--; - if( pDestructor->nRef==0 ){ - pDestructor->xDestroy(pDestructor->pUserData); - sqlite3DbFree(db, pDestructor); +SQLITE_API int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){ + int rc = SQLITE_ERROR; + Btree *pBtree; + + sqlite3_mutex_enter(db->mutex); + pBtree = sqlite3DbNameToBtree(db, zDbName); + if( pBtree ){ + Pager *pPager; + sqlite3_file *fd; + sqlite3BtreeEnter(pBtree); + pPager = sqlite3BtreePager(pBtree); + assert( pPager!=0 ); + fd = sqlite3PagerFile(pPager); + assert( fd!=0 ); + if( op==SQLITE_FCNTL_FILE_POINTER ){ + *(sqlite3_file**)pArg = fd; + rc = SQLITE_OK; + }else if( fd->pMethods ){ + rc = sqlite3OsFileControl(fd, op, pArg); + }else{ + rc = SQLITE_NOTFOUND; } + sqlite3BtreeLeave(pBtree); } + sqlite3_mutex_leave(db->mutex); + return rc; } /* -** Close an existing SQLite database +** Interface to the testing logic. */ -SQLITE_API int sqlite3_close(sqlite3 *db){ - HashElem *i; /* Hash table iterator */ - int j; +SQLITE_API int sqlite3_test_control(int op, ...){ + int rc = 0; +#ifndef SQLITE_OMIT_BUILTIN_TEST + va_list ap; + va_start(ap, op); + switch( op ){ - if( !db ){ - return SQLITE_OK; - } - if( !sqlite3SafetyCheckSickOrOk(db) ){ - return SQLITE_MISUSE_BKPT; - } - sqlite3_mutex_enter(db->mutex); + /* + ** Save the current state of the PRNG. + */ + case SQLITE_TESTCTRL_PRNG_SAVE: { + sqlite3PrngSaveState(); + break; + } - /* Force xDestroy calls on all virtual tables */ - sqlite3ResetInternalSchema(db, -1); + /* + ** Restore the state of the PRNG to the last state saved using + ** PRNG_SAVE. If PRNG_SAVE has never before been called, then + ** this verb acts like PRNG_RESET. + */ + case SQLITE_TESTCTRL_PRNG_RESTORE: { + sqlite3PrngRestoreState(); + break; + } - /* If a transaction is open, the ResetInternalSchema() call above - ** will not have called the xDisconnect() method on any virtual - ** tables in the db->aVTrans[] array. The following sqlite3VtabRollback() - ** call will do so. We need to do this before the check for active - ** SQL statements below, as the v-table implementation may be storing - ** some prepared statements internally. - */ - sqlite3VtabRollback(db); + /* + ** Reset the PRNG back to its uninitialized state. The next call + ** to sqlite3_randomness() will reseed the PRNG using a single call + ** to the xRandomness method of the default VFS. + */ + case SQLITE_TESTCTRL_PRNG_RESET: { + sqlite3_randomness(0,0); + break; + } - /* If there are any outstanding VMs, return SQLITE_BUSY. */ - if( db->pVdbe ){ - sqlite3Error(db, SQLITE_BUSY, - "unable to close due to unfinalised statements"); - sqlite3_mutex_leave(db->mutex); - return SQLITE_BUSY; - } - assert( sqlite3SafetyCheckSickOrOk(db) ); + /* + ** sqlite3_test_control(BITVEC_TEST, size, program) + ** + ** Run a test against a Bitvec object of size. The program argument + ** is an array of integers that defines the test. Return -1 on a + ** memory allocation error, 0 on success, or non-zero for an error. + ** See the sqlite3BitvecBuiltinTest() for additional information. + */ + case SQLITE_TESTCTRL_BITVEC_TEST: { + int sz = va_arg(ap, int); + int *aProg = va_arg(ap, int*); + rc = sqlite3BitvecBuiltinTest(sz, aProg); + break; + } - for(j=0; jnDb; j++){ - Btree *pBt = db->aDb[j].pBt; - if( pBt && sqlite3BtreeIsInBackup(pBt) ){ - sqlite3Error(db, SQLITE_BUSY, - "unable to close due to unfinished backup operation"); - sqlite3_mutex_leave(db->mutex); - return SQLITE_BUSY; + /* + ** sqlite3_test_control(FAULT_INSTALL, xCallback) + ** + ** Arrange to invoke xCallback() whenever sqlite3FaultSim() is called, + ** if xCallback is not NULL. + ** + ** As a test of the fault simulator mechanism itself, sqlite3FaultSim(0) + ** is called immediately after installing the new callback and the return + ** value from sqlite3FaultSim(0) becomes the return from + ** sqlite3_test_control(). + */ + case SQLITE_TESTCTRL_FAULT_INSTALL: { + /* MSVC is picky about pulling func ptrs from va lists. + ** http://support.microsoft.com/kb/47961 + ** sqlite3GlobalConfig.xTestCallback = va_arg(ap, int(*)(int)); + */ + typedef int(*TESTCALLBACKFUNC_t)(int); + sqlite3GlobalConfig.xTestCallback = va_arg(ap, TESTCALLBACKFUNC_t); + rc = sqlite3FaultSim(0); + break; } - } - /* Free any outstanding Savepoint structures. */ - sqlite3CloseSavepoints(db); + /* + ** sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd) + ** + ** Register hooks to call to indicate which malloc() failures + ** are benign. + */ + case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: { + typedef void (*void_function)(void); + void_function xBenignBegin; + void_function xBenignEnd; + xBenignBegin = va_arg(ap, void_function); + xBenignEnd = va_arg(ap, void_function); + sqlite3BenignMallocHooks(xBenignBegin, xBenignEnd); + break; + } - for(j=0; jnDb; j++){ - struct Db *pDb = &db->aDb[j]; - if( pDb->pBt ){ - sqlite3BtreeClose(pDb->pBt); - pDb->pBt = 0; - if( j!=1 ){ - pDb->pSchema = 0; + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_PENDING_BYTE, unsigned int X) + ** + ** Set the PENDING byte to the value in the argument, if X>0. + ** Make no changes if X==0. Return the value of the pending byte + ** as it existing before this routine was called. + ** + ** IMPORTANT: Changing the PENDING byte from 0x40000000 results in + ** an incompatible database file format. Changing the PENDING byte + ** while any database connection is open results in undefined and + ** deleterious behavior. + */ + case SQLITE_TESTCTRL_PENDING_BYTE: { + rc = PENDING_BYTE; +#ifndef SQLITE_OMIT_WSD + { + unsigned int newVal = va_arg(ap, unsigned int); + if( newVal ) sqlite3PendingByte = newVal; } +#endif + break; } - } - sqlite3ResetInternalSchema(db, -1); - /* Tell the code in notify.c that the connection no longer holds any - ** locks and does not require any further unlock-notify callbacks. - */ - sqlite3ConnectionClosed(db); + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, int X) + ** + ** This action provides a run-time test to see whether or not + ** assert() was enabled at compile-time. If X is true and assert() + ** is enabled, then the return value is true. If X is true and + ** assert() is disabled, then the return value is zero. If X is + ** false and assert() is enabled, then the assertion fires and the + ** process aborts. If X is false and assert() is disabled, then the + ** return value is zero. + */ + case SQLITE_TESTCTRL_ASSERT: { + volatile int x = 0; + assert( (x = va_arg(ap,int))!=0 ); + rc = x; + break; + } - assert( db->nDb<=2 ); - assert( db->aDb==db->aDbStatic ); - for(j=0; jaFunc.a); j++){ - FuncDef *pNext, *pHash, *p; - for(p=db->aFunc.a[j]; p; p=pHash){ - pHash = p->pHash; - while( p ){ - functionDestroy(db, p); - pNext = p->pNext; - sqlite3DbFree(db, p); - p = pNext; - } + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, int X) + ** + ** This action provides a run-time test to see how the ALWAYS and + ** NEVER macros were defined at compile-time. + ** + ** The return value is ALWAYS(X). + ** + ** The recommended test is X==2. If the return value is 2, that means + ** ALWAYS() and NEVER() are both no-op pass-through macros, which is the + ** default setting. If the return value is 1, then ALWAYS() is either + ** hard-coded to true or else it asserts if its argument is false. + ** The first behavior (hard-coded to true) is the case if + ** SQLITE_TESTCTRL_ASSERT shows that assert() is disabled and the second + ** behavior (assert if the argument to ALWAYS() is false) is the case if + ** SQLITE_TESTCTRL_ASSERT shows that assert() is enabled. + ** + ** The run-time test procedure might look something like this: + ** + ** if( sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, 2)==2 ){ + ** // ALWAYS() and NEVER() are no-op pass-through macros + ** }else if( sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, 1) ){ + ** // ALWAYS(x) asserts that x is true. NEVER(x) asserts x is false. + ** }else{ + ** // ALWAYS(x) is a constant 1. NEVER(x) is a constant 0. + ** } + */ + case SQLITE_TESTCTRL_ALWAYS: { + int x = va_arg(ap,int); + rc = ALWAYS(x); + break; } - } - for(i=sqliteHashFirst(&db->aCollSeq); i; i=sqliteHashNext(i)){ - CollSeq *pColl = (CollSeq *)sqliteHashData(i); - /* Invoke any destructors registered for collation sequence user data. */ - for(j=0; j<3; j++){ - if( pColl[j].xDel ){ - pColl[j].xDel(pColl[j].pUser); - } + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_BYTEORDER); + ** + ** The integer returned reveals the byte-order of the computer on which + ** SQLite is running: + ** + ** 1 big-endian, determined at run-time + ** 10 little-endian, determined at run-time + ** 432101 big-endian, determined at compile-time + ** 123410 little-endian, determined at compile-time + */ + case SQLITE_TESTCTRL_BYTEORDER: { + rc = SQLITE_BYTEORDER*100 + SQLITE_LITTLEENDIAN*10 + SQLITE_BIGENDIAN; + break; } - sqlite3DbFree(db, pColl); - } - sqlite3HashClear(&db->aCollSeq); -#ifndef SQLITE_OMIT_VIRTUALTABLE - for(i=sqliteHashFirst(&db->aModule); i; i=sqliteHashNext(i)){ - Module *pMod = (Module *)sqliteHashData(i); - if( pMod->xDestroy ){ - pMod->xDestroy(pMod->pAux); + + /* sqlite3_test_control(SQLITE_TESTCTRL_RESERVE, sqlite3 *db, int N) + ** + ** Set the nReserve size to N for the main database on the database + ** connection db. + */ + case SQLITE_TESTCTRL_RESERVE: { + sqlite3 *db = va_arg(ap, sqlite3*); + int x = va_arg(ap,int); + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeSetPageSize(db->aDb[0].pBt, 0, x, 0); + sqlite3_mutex_leave(db->mutex); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS, sqlite3 *db, int N) + ** + ** Enable or disable various optimizations for testing purposes. The + ** argument N is a bitmask of optimizations to be disabled. For normal + ** operation N should be 0. The idea is that a test program (like the + ** SQL Logic Test or SLT test module) can run the same SQL multiple times + ** with various optimizations disabled to verify that the same answer + ** is obtained in every case. + */ + case SQLITE_TESTCTRL_OPTIMIZATIONS: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->dbOptFlags = (u16)(va_arg(ap, int) & 0xffff); + break; + } + +#ifdef SQLITE_N_KEYWORD + /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord) + ** + ** If zWord is a keyword recognized by the parser, then return the + ** number of keywords. Or if zWord is not a keyword, return 0. + ** + ** This test feature is only available in the amalgamation since + ** the SQLITE_N_KEYWORD macro is not defined in this file if SQLite + ** is built using separate source files. + */ + case SQLITE_TESTCTRL_ISKEYWORD: { + const char *zWord = va_arg(ap, const char*); + int n = sqlite3Strlen30(zWord); + rc = (sqlite3KeywordCode((u8*)zWord, n)!=TK_ID) ? SQLITE_N_KEYWORD : 0; + break; + } +#endif + + /* sqlite3_test_control(SQLITE_TESTCTRL_SCRATCHMALLOC, sz, &pNew, pFree); + ** + ** Pass pFree into sqlite3ScratchFree(). + ** If sz>0 then allocate a scratch buffer into pNew. + */ + case SQLITE_TESTCTRL_SCRATCHMALLOC: { + void *pFree, **ppNew; + int sz; + sz = va_arg(ap, int); + ppNew = va_arg(ap, void**); + pFree = va_arg(ap, void*); + if( sz ) *ppNew = sqlite3ScratchMalloc(sz); + sqlite3ScratchFree(pFree); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff); + ** + ** If parameter onoff is non-zero, configure the wrappers so that all + ** subsequent calls to localtime() and variants fail. If onoff is zero, + ** undo this setting. + */ + case SQLITE_TESTCTRL_LOCALTIME_FAULT: { + sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int); + ** + ** Set or clear a flag that indicates that the database file is always well- + ** formed and never corrupt. This flag is clear by default, indicating that + ** database files might have arbitrary corruption. Setting the flag during + ** testing causes certain assert() statements in the code to be activated + ** that demonstrat invariants on well-formed database files. + */ + case SQLITE_TESTCTRL_NEVER_CORRUPT: { + sqlite3GlobalConfig.neverCorrupt = va_arg(ap, int); + break; + } + + + /* sqlite3_test_control(SQLITE_TESTCTRL_VDBE_COVERAGE, xCallback, ptr); + ** + ** Set the VDBE coverage callback function to xCallback with context + ** pointer ptr. + */ + case SQLITE_TESTCTRL_VDBE_COVERAGE: { +#ifdef SQLITE_VDBE_COVERAGE + typedef void (*branch_callback)(void*,int,u8,u8); + sqlite3GlobalConfig.xVdbeBranch = va_arg(ap,branch_callback); + sqlite3GlobalConfig.pVdbeBranchArg = va_arg(ap,void*); +#endif + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_SORTER_MMAP, db, nMax); */ + case SQLITE_TESTCTRL_SORTER_MMAP: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->nMaxSorterMmap = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_ISINIT); + ** + ** Return SQLITE_OK if SQLite has been initialized and SQLITE_ERROR if + ** not. + */ + case SQLITE_TESTCTRL_ISINIT: { + if( sqlite3GlobalConfig.isInit==0 ) rc = SQLITE_ERROR; + break; } - sqlite3DbFree(db, pMod); } - sqlite3HashClear(&db->aModule); -#endif + va_end(ap); +#endif /* SQLITE_OMIT_BUILTIN_TEST */ + return rc; +} - sqlite3Error(db, SQLITE_OK, 0); /* Deallocates any cached error strings. */ - if( db->pErr ){ - sqlite3ValueFree(db->pErr); +/* +** This is a utility routine, useful to VFS implementations, that checks +** to see if a database file was a URI that contained a specific query +** parameter, and if so obtains the value of the query parameter. +** +** The zFilename argument is the filename pointer passed into the xOpen() +** method of a VFS implementation. The zParam argument is the name of the +** query parameter we seek. This routine returns the value of the zParam +** parameter if it exists. If the parameter does not exist, this routine +** returns a NULL pointer. +*/ +SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){ + if( zFilename==0 ) return 0; + zFilename += sqlite3Strlen30(zFilename) + 1; + while( zFilename[0] ){ + int x = strcmp(zFilename, zParam); + zFilename += sqlite3Strlen30(zFilename) + 1; + if( x==0 ) return zFilename; + zFilename += sqlite3Strlen30(zFilename) + 1; } - sqlite3CloseExtensions(db); + return 0; +} - db->magic = SQLITE_MAGIC_ERROR; +/* +** Return a boolean value for a query parameter. +*/ +SQLITE_API int sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){ + const char *z = sqlite3_uri_parameter(zFilename, zParam); + bDflt = bDflt!=0; + return z ? sqlite3GetBoolean(z, bDflt) : bDflt; +} - /* The temp-database schema is allocated differently from the other schema - ** objects (using sqliteMalloc() directly, instead of sqlite3BtreeSchema()). - ** So it needs to be freed here. Todo: Why not roll the temp schema into - ** the same sqliteMalloc() as the one that allocates the database - ** structure? - */ - sqlite3DbFree(db, db->aDb[1].pSchema); - sqlite3_mutex_leave(db->mutex); - db->magic = SQLITE_MAGIC_CLOSED; - sqlite3_mutex_free(db->mutex); - assert( db->lookaside.nOut==0 ); /* Fails on a lookaside memory leak */ - if( db->lookaside.bMalloced ){ - sqlite3_free(db->lookaside.pStart); +/* +** Return a 64-bit integer value for a query parameter. +*/ +SQLITE_API sqlite3_int64 sqlite3_uri_int64( + const char *zFilename, /* Filename as passed to xOpen */ + const char *zParam, /* URI parameter sought */ + sqlite3_int64 bDflt /* return if parameter is missing */ +){ + const char *z = sqlite3_uri_parameter(zFilename, zParam); + sqlite3_int64 v; + if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){ + bDflt = v; } - sqlite3_free(db); - return SQLITE_OK; + return bDflt; } /* -** Rollback all database files. +** Return the Btree pointer identified by zDbName. Return NULL if not found. */ -SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db){ +SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3 *db, const char *zDbName){ int i; - int inTrans = 0; - assert( sqlite3_mutex_held(db->mutex) ); - sqlite3BeginBenignMalloc(); for(i=0; inDb; i++){ - if( db->aDb[i].pBt ){ - if( sqlite3BtreeIsInTrans(db->aDb[i].pBt) ){ - inTrans = 1; - } - sqlite3BtreeRollback(db->aDb[i].pBt); - db->aDb[i].inTrans = 0; + if( db->aDb[i].pBt + && (zDbName==0 || sqlite3StrICmp(zDbName, db->aDb[i].zName)==0) + ){ + return db->aDb[i].pBt; } } - sqlite3VtabRollback(db); - sqlite3EndBenignMalloc(); - - if( db->flags&SQLITE_InternChanges ){ - sqlite3ExpirePreparedStatements(db); - sqlite3ResetInternalSchema(db, -1); - } - - /* Any deferred constraint violations have now been resolved. */ - db->nDeferredCons = 0; + return 0; +} - /* If one has been configured, invoke the rollback-hook callback */ - if( db->xRollbackCallback && (inTrans || !db->autoCommit) ){ - db->xRollbackCallback(db->pRollbackArg); - } +/* +** Return the filename of the database associated with a database +** connection. +*/ +SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){ + Btree *pBt = sqlite3DbNameToBtree(db, zDbName); + return pBt ? sqlite3BtreeGetFilename(pBt) : 0; } /* -** Return a static string that describes the kind of error specified in the -** argument. +** Return 1 if database is read-only or 0 if read/write. Return -1 if +** no such database exists. */ -SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ - static const char* const aMsg[] = { - /* SQLITE_OK */ "not an error", - /* SQLITE_ERROR */ "SQL logic error or missing database", - /* SQLITE_INTERNAL */ 0, - /* SQLITE_PERM */ "access permission denied", - /* SQLITE_ABORT */ "callback requested query abort", - /* SQLITE_BUSY */ "database is locked", - /* SQLITE_LOCKED */ "database table is locked", - /* SQLITE_NOMEM */ "out of memory", - /* SQLITE_READONLY */ "attempt to write a readonly database", - /* SQLITE_INTERRUPT */ "interrupted", - /* SQLITE_IOERR */ "disk I/O error", - /* SQLITE_CORRUPT */ "database disk image is malformed", - /* SQLITE_NOTFOUND */ "unknown operation", - /* SQLITE_FULL */ "database or disk is full", - /* SQLITE_CANTOPEN */ "unable to open database file", - /* SQLITE_PROTOCOL */ "locking protocol", - /* SQLITE_EMPTY */ "table contains no data", - /* SQLITE_SCHEMA */ "database schema has changed", - /* SQLITE_TOOBIG */ "string or blob too big", - /* SQLITE_CONSTRAINT */ "constraint failed", - /* SQLITE_MISMATCH */ "datatype mismatch", - /* SQLITE_MISUSE */ "library routine called out of sequence", - /* SQLITE_NOLFS */ "large file support is disabled", - /* SQLITE_AUTH */ "authorization denied", - /* SQLITE_FORMAT */ "auxiliary database format error", - /* SQLITE_RANGE */ "bind or column index out of range", - /* SQLITE_NOTADB */ "file is encrypted or is not a database", - }; - rc &= 0xff; - if( ALWAYS(rc>=0) && rc<(int)(sizeof(aMsg)/sizeof(aMsg[0])) && aMsg[rc]!=0 ){ - return aMsg[rc]; - }else{ - return "unknown error"; - } +SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){ + Btree *pBt = sqlite3DbNameToBtree(db, zDbName); + return pBt ? sqlite3BtreeIsReadonly(pBt) : -1; } +/************** End of main.c ************************************************/ +/************** Begin file notify.c ******************************************/ /* -** This routine implements a busy callback that sleeps and tries -** again until a timeout value is reached. The timeout value is -** an integer number of milliseconds passed in as the first -** argument. +** 2009 March 3 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains the implementation of the sqlite3_unlock_notify() +** API method and its associated functionality. */ -static int sqliteDefaultBusyCallback( - void *ptr, /* Database connection */ - int count /* Number of times table has been busy */ -){ -#if SQLITE_OS_WIN || (defined(HAVE_USLEEP) && HAVE_USLEEP) - static const u8 delays[] = - { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 }; - static const u8 totals[] = - { 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 }; -# define NDELAY ArraySize(delays) - sqlite3 *db = (sqlite3 *)ptr; - int timeout = db->busyTimeout; - int delay, prior; - assert( count>=0 ); - if( count < NDELAY ){ - delay = delays[count]; - prior = totals[count]; - }else{ - delay = delays[NDELAY-1]; - prior = totals[NDELAY-1] + delay*(count-(NDELAY-1)); - } - if( prior + delay > timeout ){ - delay = timeout - prior; - if( delay<=0 ) return 0; +/* Omit this entire file if SQLITE_ENABLE_UNLOCK_NOTIFY is not defined. */ +#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY + +/* +** Public interfaces: +** +** sqlite3ConnectionBlocked() +** sqlite3ConnectionUnlocked() +** sqlite3ConnectionClosed() +** sqlite3_unlock_notify() +*/ + +#define assertMutexHeld() \ + assert( sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)) ) + +/* +** Head of a linked list of all sqlite3 objects created by this process +** for which either sqlite3.pBlockingConnection or sqlite3.pUnlockConnection +** is not NULL. This variable may only accessed while the STATIC_MASTER +** mutex is held. +*/ +static sqlite3 *SQLITE_WSD sqlite3BlockedList = 0; + +#ifndef NDEBUG +/* +** This function is a complex assert() that verifies the following +** properties of the blocked connections list: +** +** 1) Each entry in the list has a non-NULL value for either +** pUnlockConnection or pBlockingConnection, or both. +** +** 2) All entries in the list that share a common value for +** xUnlockNotify are grouped together. +** +** 3) If the argument db is not NULL, then none of the entries in the +** blocked connections list have pUnlockConnection or pBlockingConnection +** set to db. This is used when closing connection db. +*/ +static void checkListProperties(sqlite3 *db){ + sqlite3 *p; + for(p=sqlite3BlockedList; p; p=p->pNextBlocked){ + int seen = 0; + sqlite3 *p2; + + /* Verify property (1) */ + assert( p->pUnlockConnection || p->pBlockingConnection ); + + /* Verify property (2) */ + for(p2=sqlite3BlockedList; p2!=p; p2=p2->pNextBlocked){ + if( p2->xUnlockNotify==p->xUnlockNotify ) seen = 1; + assert( p2->xUnlockNotify==p->xUnlockNotify || !seen ); + assert( db==0 || p->pUnlockConnection!=db ); + assert( db==0 || p->pBlockingConnection!=db ); + } } - sqlite3OsSleep(db->pVfs, delay*1000); - return 1; +} #else - sqlite3 *db = (sqlite3 *)ptr; - int timeout = ((sqlite3 *)ptr)->busyTimeout; - if( (count+1)*1000 > timeout ){ - return 0; - } - sqlite3OsSleep(db->pVfs, 1000000); - return 1; +# define checkListProperties(x) #endif -} /* -** Invoke the given busy handler. -** -** This routine is called when an operation failed with a lock. -** If this routine returns non-zero, the lock is retried. If it -** returns 0, the operation aborts with an SQLITE_BUSY error. +** Remove connection db from the blocked connections list. If connection +** db is not currently a part of the list, this function is a no-op. */ -SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p){ - int rc; - if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0; - rc = p->xFunc(p->pArg, p->nBusy); - if( rc==0 ){ - p->nBusy = -1; - }else{ - p->nBusy++; +static void removeFromBlockedList(sqlite3 *db){ + sqlite3 **pp; + assertMutexHeld(); + for(pp=&sqlite3BlockedList; *pp; pp = &(*pp)->pNextBlocked){ + if( *pp==db ){ + *pp = (*pp)->pNextBlocked; + break; + } } - return rc; } /* -** This routine sets the busy callback for an Sqlite database to the -** given callback function with the given argument. +** Add connection db to the blocked connections list. It is assumed +** that it is not already a part of the list. */ -SQLITE_API int sqlite3_busy_handler( - sqlite3 *db, - int (*xBusy)(void*,int), - void *pArg -){ - sqlite3_mutex_enter(db->mutex); - db->busyHandler.xFunc = xBusy; - db->busyHandler.pArg = pArg; - db->busyHandler.nBusy = 0; - sqlite3_mutex_leave(db->mutex); - return SQLITE_OK; +static void addToBlockedList(sqlite3 *db){ + sqlite3 **pp; + assertMutexHeld(); + for( + pp=&sqlite3BlockedList; + *pp && (*pp)->xUnlockNotify!=db->xUnlockNotify; + pp=&(*pp)->pNextBlocked + ); + db->pNextBlocked = *pp; + *pp = db; } -#ifndef SQLITE_OMIT_PROGRESS_CALLBACK /* -** This routine sets the progress callback for an Sqlite database to the -** given callback function with the given argument. The progress callback will -** be invoked every nOps opcodes. +** Obtain the STATIC_MASTER mutex. */ -SQLITE_API void sqlite3_progress_handler( - sqlite3 *db, - int nOps, - int (*xProgress)(void*), +static void enterMutex(void){ + sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)); + checkListProperties(0); +} + +/* +** Release the STATIC_MASTER mutex. +*/ +static void leaveMutex(void){ + assertMutexHeld(); + checkListProperties(0); + sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)); +} + +/* +** Register an unlock-notify callback. +** +** This is called after connection "db" has attempted some operation +** but has received an SQLITE_LOCKED error because another connection +** (call it pOther) in the same process was busy using the same shared +** cache. pOther is found by looking at db->pBlockingConnection. +** +** If there is no blocking connection, the callback is invoked immediately, +** before this routine returns. +** +** If pOther is already blocked on db, then report SQLITE_LOCKED, to indicate +** a deadlock. +** +** Otherwise, make arrangements to invoke xNotify when pOther drops +** its locks. +** +** Each call to this routine overrides any prior callbacks registered +** on the same "db". If xNotify==0 then any prior callbacks are immediately +** cancelled. +*/ +SQLITE_API int sqlite3_unlock_notify( + sqlite3 *db, + void (*xNotify)(void **, int), void *pArg ){ + int rc = SQLITE_OK; + sqlite3_mutex_enter(db->mutex); - if( nOps>0 ){ - db->xProgress = xProgress; - db->nProgressOps = nOps; - db->pProgressArg = pArg; + enterMutex(); + + if( xNotify==0 ){ + removeFromBlockedList(db); + db->pBlockingConnection = 0; + db->pUnlockConnection = 0; + db->xUnlockNotify = 0; + db->pUnlockArg = 0; + }else if( 0==db->pBlockingConnection ){ + /* The blocking transaction has been concluded. Or there never was a + ** blocking transaction. In either case, invoke the notify callback + ** immediately. + */ + xNotify(&pArg, 1); }else{ - db->xProgress = 0; - db->nProgressOps = 0; - db->pProgressArg = 0; + sqlite3 *p; + + for(p=db->pBlockingConnection; p && p!=db; p=p->pUnlockConnection){} + if( p ){ + rc = SQLITE_LOCKED; /* Deadlock detected. */ + }else{ + db->pUnlockConnection = db->pBlockingConnection; + db->xUnlockNotify = xNotify; + db->pUnlockArg = pArg; + removeFromBlockedList(db); + addToBlockedList(db); + } } + + leaveMutex(); + assert( !db->mallocFailed ); + sqlite3ErrorWithMsg(db, rc, (rc?"database is deadlocked":0)); sqlite3_mutex_leave(db->mutex); + return rc; } -#endif - /* -** This routine installs a default busy handler that waits for the -** specified number of milliseconds before returning 0. +** This function is called while stepping or preparing a statement +** associated with connection db. The operation will return SQLITE_LOCKED +** to the user because it requires a lock that will not be available +** until connection pBlocker concludes its current transaction. */ -SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){ - if( ms>0 ){ - db->busyTimeout = ms; - sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db); - }else{ - sqlite3_busy_handler(db, 0, 0); +SQLITE_PRIVATE void sqlite3ConnectionBlocked(sqlite3 *db, sqlite3 *pBlocker){ + enterMutex(); + if( db->pBlockingConnection==0 && db->pUnlockConnection==0 ){ + addToBlockedList(db); } - return SQLITE_OK; + db->pBlockingConnection = pBlocker; + leaveMutex(); } /* -** Cause any pending operation to stop at its earliest opportunity. +** This function is called when +** the transaction opened by database db has just finished. Locks held +** by database connection db have been released. +** +** This function loops through each entry in the blocked connections +** list and does the following: +** +** 1) If the sqlite3.pBlockingConnection member of a list entry is +** set to db, then set pBlockingConnection=0. +** +** 2) If the sqlite3.pUnlockConnection member of a list entry is +** set to db, then invoke the configured unlock-notify callback and +** set pUnlockConnection=0. +** +** 3) If the two steps above mean that pBlockingConnection==0 and +** pUnlockConnection==0, remove the entry from the blocked connections +** list. */ -SQLITE_API void sqlite3_interrupt(sqlite3 *db){ - db->u1.isInterrupted = 1; -} +SQLITE_PRIVATE void sqlite3ConnectionUnlocked(sqlite3 *db){ + void (*xUnlockNotify)(void **, int) = 0; /* Unlock-notify cb to invoke */ + int nArg = 0; /* Number of entries in aArg[] */ + sqlite3 **pp; /* Iterator variable */ + void **aArg; /* Arguments to the unlock callback */ + void **aDyn = 0; /* Dynamically allocated space for aArg[] */ + void *aStatic[16]; /* Starter space for aArg[]. No malloc required */ + aArg = aStatic; + enterMutex(); /* Enter STATIC_MASTER mutex */ -/* -** This function is exactly the same as sqlite3_create_function(), except -** that it is designed to be called by internal code. The difference is -** that if a malloc() fails in sqlite3_create_function(), an error code -** is returned and the mallocFailed flag cleared. -*/ -SQLITE_PRIVATE int sqlite3CreateFunc( - sqlite3 *db, - const char *zFunctionName, - int nArg, - int enc, - void *pUserData, - void (*xFunc)(sqlite3_context*,int,sqlite3_value **), - void (*xStep)(sqlite3_context*,int,sqlite3_value **), - void (*xFinal)(sqlite3_context*), - FuncDestructor *pDestructor -){ - FuncDef *p; - int nName; + /* This loop runs once for each entry in the blocked-connections list. */ + for(pp=&sqlite3BlockedList; *pp; /* no-op */ ){ + sqlite3 *p = *pp; - assert( sqlite3_mutex_held(db->mutex) ); - if( zFunctionName==0 || - (xFunc && (xFinal || xStep)) || - (!xFunc && (xFinal && !xStep)) || - (!xFunc && (!xFinal && xStep)) || - (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) || - (255<(nName = sqlite3Strlen30( zFunctionName))) ){ - return SQLITE_MISUSE_BKPT; - } - -#ifndef SQLITE_OMIT_UTF16 - /* If SQLITE_UTF16 is specified as the encoding type, transform this - ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the - ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. - ** - ** If SQLITE_ANY is specified, add three versions of the function - ** to the hash table. - */ - if( enc==SQLITE_UTF16 ){ - enc = SQLITE_UTF16NATIVE; - }else if( enc==SQLITE_ANY ){ - int rc; - rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF8, - pUserData, xFunc, xStep, xFinal, pDestructor); - if( rc==SQLITE_OK ){ - rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF16LE, - pUserData, xFunc, xStep, xFinal, pDestructor); + /* Step 1. */ + if( p->pBlockingConnection==db ){ + p->pBlockingConnection = 0; } - if( rc!=SQLITE_OK ){ - return rc; + + /* Step 2. */ + if( p->pUnlockConnection==db ){ + assert( p->xUnlockNotify ); + if( p->xUnlockNotify!=xUnlockNotify && nArg!=0 ){ + xUnlockNotify(aArg, nArg); + nArg = 0; + } + + sqlite3BeginBenignMalloc(); + assert( aArg==aDyn || (aDyn==0 && aArg==aStatic) ); + assert( nArg<=(int)ArraySize(aStatic) || aArg==aDyn ); + if( (!aDyn && nArg==(int)ArraySize(aStatic)) + || (aDyn && nArg==(int)(sqlite3MallocSize(aDyn)/sizeof(void*))) + ){ + /* The aArg[] array needs to grow. */ + void **pNew = (void **)sqlite3Malloc(nArg*sizeof(void *)*2); + if( pNew ){ + memcpy(pNew, aArg, nArg*sizeof(void *)); + sqlite3_free(aDyn); + aDyn = aArg = pNew; + }else{ + /* This occurs when the array of context pointers that need to + ** be passed to the unlock-notify callback is larger than the + ** aStatic[] array allocated on the stack and the attempt to + ** allocate a larger array from the heap has failed. + ** + ** This is a difficult situation to handle. Returning an error + ** code to the caller is insufficient, as even if an error code + ** is returned the transaction on connection db will still be + ** closed and the unlock-notify callbacks on blocked connections + ** will go unissued. This might cause the application to wait + ** indefinitely for an unlock-notify callback that will never + ** arrive. + ** + ** Instead, invoke the unlock-notify callback with the context + ** array already accumulated. We can then clear the array and + ** begin accumulating any further context pointers without + ** requiring any dynamic allocation. This is sub-optimal because + ** it means that instead of one callback with a large array of + ** context pointers the application will receive two or more + ** callbacks with smaller arrays of context pointers, which will + ** reduce the applications ability to prioritize multiple + ** connections. But it is the best that can be done under the + ** circumstances. + */ + xUnlockNotify(aArg, nArg); + nArg = 0; + } + } + sqlite3EndBenignMalloc(); + + aArg[nArg++] = p->pUnlockArg; + xUnlockNotify = p->xUnlockNotify; + p->pUnlockConnection = 0; + p->xUnlockNotify = 0; + p->pUnlockArg = 0; } - enc = SQLITE_UTF16BE; - } -#else - enc = SQLITE_UTF8; -#endif - - /* Check if an existing function is being overridden or deleted. If so, - ** and there are active VMs, then return SQLITE_BUSY. If a function - ** is being overridden/deleted but there are no active VMs, allow the - ** operation to continue but invalidate all precompiled statements. - */ - p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 0); - if( p && p->iPrefEnc==enc && p->nArg==nArg ){ - if( db->activeVdbeCnt ){ - sqlite3Error(db, SQLITE_BUSY, - "unable to delete/modify user-function due to active statements"); - assert( !db->mallocFailed ); - return SQLITE_BUSY; + + /* Step 3. */ + if( p->pBlockingConnection==0 && p->pUnlockConnection==0 ){ + /* Remove connection p from the blocked connections list. */ + *pp = p->pNextBlocked; + p->pNextBlocked = 0; }else{ - sqlite3ExpirePreparedStatements(db); + pp = &p->pNextBlocked; } } - p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 1); - assert(p || db->mallocFailed); - if( !p ){ - return SQLITE_NOMEM; - } - - /* If an older version of the function with a configured destructor is - ** being replaced invoke the destructor function here. */ - functionDestroy(db, p); - - if( pDestructor ){ - pDestructor->nRef++; + if( nArg!=0 ){ + xUnlockNotify(aArg, nArg); } - p->pDestructor = pDestructor; - p->flags = 0; - p->xFunc = xFunc; - p->xStep = xStep; - p->xFinalize = xFinal; - p->pUserData = pUserData; - p->nArg = (u16)nArg; - return SQLITE_OK; + sqlite3_free(aDyn); + leaveMutex(); /* Leave STATIC_MASTER mutex */ } /* -** Create new user functions. +** This is called when the database connection passed as an argument is +** being closed. The connection is removed from the blocked list. */ -SQLITE_API int sqlite3_create_function( - sqlite3 *db, - const char *zFunc, - int nArg, - int enc, - void *p, - void (*xFunc)(sqlite3_context*,int,sqlite3_value **), - void (*xStep)(sqlite3_context*,int,sqlite3_value **), - void (*xFinal)(sqlite3_context*) -){ - return sqlite3_create_function_v2(db, zFunc, nArg, enc, p, xFunc, xStep, - xFinal, 0); -} - -SQLITE_API int sqlite3_create_function_v2( - sqlite3 *db, - const char *zFunc, - int nArg, - int enc, - void *p, - void (*xFunc)(sqlite3_context*,int,sqlite3_value **), - void (*xStep)(sqlite3_context*,int,sqlite3_value **), - void (*xFinal)(sqlite3_context*), - void (*xDestroy)(void *) -){ - int rc = SQLITE_ERROR; - FuncDestructor *pArg = 0; - sqlite3_mutex_enter(db->mutex); - if( xDestroy ){ - pArg = (FuncDestructor *)sqlite3DbMallocZero(db, sizeof(FuncDestructor)); - if( !pArg ){ - xDestroy(p); - goto out; - } - pArg->xDestroy = xDestroy; - pArg->pUserData = p; - } - rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, xFunc, xStep, xFinal, pArg); - if( pArg && pArg->nRef==0 ){ - assert( rc!=SQLITE_OK ); - xDestroy(p); - sqlite3DbFree(db, pArg); - } - - out: - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; -} - -#ifndef SQLITE_OMIT_UTF16 -SQLITE_API int sqlite3_create_function16( - sqlite3 *db, - const void *zFunctionName, - int nArg, - int eTextRep, - void *p, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -){ - int rc; - char *zFunc8; - sqlite3_mutex_enter(db->mutex); - assert( !db->mallocFailed ); - zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE); - rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xFunc, xStep, xFinal,0); - sqlite3DbFree(db, zFunc8); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; +SQLITE_PRIVATE void sqlite3ConnectionClosed(sqlite3 *db){ + sqlite3ConnectionUnlocked(db); + enterMutex(); + removeFromBlockedList(db); + checkListProperties(db); + leaveMutex(); } #endif - +/************** End of notify.c **********************************************/ +/************** Begin file fts3.c ********************************************/ /* -** Declare that a function has been overloaded by a virtual table. +** 2006 Oct 10 ** -** If the function already exists as a regular global function, then -** this routine is a no-op. If the function does not exist, then create -** a new one that always throws a run-time error. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** When virtual tables intend to provide an overloaded function, they -** should call this routine to make sure the global function exists. -** A global function must exist in order for name resolution to work -** properly. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This is an SQLite module implementing full-text search. */ -SQLITE_API int sqlite3_overload_function( - sqlite3 *db, - const char *zName, - int nArg -){ - int nName = sqlite3Strlen30(zName); - int rc; - sqlite3_mutex_enter(db->mutex); - if( sqlite3FindFunction(db, zName, nName, nArg, SQLITE_UTF8, 0)==0 ){ - sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8, - 0, sqlite3InvalidFunction, 0, 0, 0); - } - rc = sqlite3ApiExit(db, SQLITE_OK); - sqlite3_mutex_leave(db->mutex); - return rc; -} -#ifndef SQLITE_OMIT_TRACE /* -** Register a trace function. The pArg from the previously registered trace -** is returned. +** The code in this file is only compiled if: ** -** A NULL trace function means that no tracing is executes. A non-NULL -** trace is a pointer to a function that is invoked at the start of each -** SQL statement. -*/ -SQLITE_API void *sqlite3_trace(sqlite3 *db, void (*xTrace)(void*,const char*), void *pArg){ - void *pOld; - sqlite3_mutex_enter(db->mutex); - pOld = db->pTraceArg; - db->xTrace = xTrace; - db->pTraceArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pOld; -} -/* -** Register a profile function. The pArg from the previously registered -** profile function is returned. +** * The FTS3 module is being built as an extension +** (in which case SQLITE_CORE is not defined), or ** -** A NULL profile function means that no profiling is executes. A non-NULL -** profile is a pointer to a function that is invoked at the conclusion of -** each SQL statement that is run. +** * The FTS3 module is being built into the core of +** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). */ -SQLITE_API void *sqlite3_profile( - sqlite3 *db, - void (*xProfile)(void*,const char*,sqlite_uint64), - void *pArg -){ - void *pOld; - sqlite3_mutex_enter(db->mutex); - pOld = db->pProfileArg; - db->xProfile = xProfile; - db->pProfileArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pOld; -} -#endif /* SQLITE_OMIT_TRACE */ -/*** EXPERIMENTAL *** +/* The full-text index is stored in a series of b+tree (-like) +** structures called segments which map terms to doclists. The +** structures are like b+trees in layout, but are constructed from the +** bottom up in optimal fashion and are not updatable. Since trees +** are built from the bottom up, things will be described from the +** bottom up. ** -** Register a function to be invoked when a transaction comments. -** If the invoked function returns non-zero, then the commit becomes a -** rollback. +** +**** Varints **** +** The basic unit of encoding is a variable-length integer called a +** varint. We encode variable-length integers in little-endian order +** using seven bits * per byte as follows: +** +** KEY: +** A = 0xxxxxxx 7 bits of data and one flag bit +** B = 1xxxxxxx 7 bits of data and one flag bit +** +** 7 bits - A +** 14 bits - BA +** 21 bits - BBA +** and so on. +** +** This is similar in concept to how sqlite encodes "varints" but +** the encoding is not the same. SQLite varints are big-endian +** are are limited to 9 bytes in length whereas FTS3 varints are +** little-endian and can be up to 10 bytes in length (in theory). +** +** Example encodings: +** +** 1: 0x01 +** 127: 0x7f +** 128: 0x81 0x00 +** +** +**** Document lists **** +** A doclist (document list) holds a docid-sorted list of hits for a +** given term. Doclists hold docids and associated token positions. +** A docid is the unique integer identifier for a single document. +** A position is the index of a word within the document. The first +** word of the document has a position of 0. +** +** FTS3 used to optionally store character offsets using a compile-time +** option. But that functionality is no longer supported. +** +** A doclist is stored like this: +** +** array { +** varint docid; (delta from previous doclist) +** array { (position list for column 0) +** varint position; (2 more than the delta from previous position) +** } +** array { +** varint POS_COLUMN; (marks start of position list for new column) +** varint column; (index of new column) +** array { +** varint position; (2 more than the delta from previous position) +** } +** } +** varint POS_END; (marks end of positions for this document. +** } +** +** Here, array { X } means zero or more occurrences of X, adjacent in +** memory. A "position" is an index of a token in the token stream +** generated by the tokenizer. Note that POS_END and POS_COLUMN occur +** in the same logical place as the position element, and act as sentinals +** ending a position list array. POS_END is 0. POS_COLUMN is 1. +** The positions numbers are not stored literally but rather as two more +** than the difference from the prior position, or the just the position plus +** 2 for the first position. Example: +** +** label: A B C D E F G H I J K +** value: 123 5 9 1 1 14 35 0 234 72 0 +** +** The 123 value is the first docid. For column zero in this document +** there are two matches at positions 3 and 10 (5-2 and 9-2+3). The 1 +** at D signals the start of a new column; the 1 at E indicates that the +** new column is column number 1. There are two positions at 12 and 45 +** (14-2 and 35-2+12). The 0 at H indicate the end-of-document. The +** 234 at I is the delta to next docid (357). It has one position 70 +** (72-2) and then terminates with the 0 at K. +** +** A "position-list" is the list of positions for multiple columns for +** a single docid. A "column-list" is the set of positions for a single +** column. Hence, a position-list consists of one or more column-lists, +** a document record consists of a docid followed by a position-list and +** a doclist consists of one or more document records. +** +** A bare doclist omits the position information, becoming an +** array of varint-encoded docids. +** +**** Segment leaf nodes **** +** Segment leaf nodes store terms and doclists, ordered by term. Leaf +** nodes are written using LeafWriter, and read using LeafReader (to +** iterate through a single leaf node's data) and LeavesReader (to +** iterate through a segment's entire leaf layer). Leaf nodes have +** the format: +** +** varint iHeight; (height from leaf level, always 0) +** varint nTerm; (length of first term) +** char pTerm[nTerm]; (content of first term) +** varint nDoclist; (length of term's associated doclist) +** char pDoclist[nDoclist]; (content of doclist) +** array { +** (further terms are delta-encoded) +** varint nPrefix; (length of prefix shared with previous term) +** varint nSuffix; (length of unshared suffix) +** char pTermSuffix[nSuffix];(unshared suffix of next term) +** varint nDoclist; (length of term's associated doclist) +** char pDoclist[nDoclist]; (content of doclist) +** } +** +** Here, array { X } means zero or more occurrences of X, adjacent in +** memory. +** +** Leaf nodes are broken into blocks which are stored contiguously in +** the %_segments table in sorted order. This means that when the end +** of a node is reached, the next term is in the node with the next +** greater node id. +** +** New data is spilled to a new leaf node when the current node +** exceeds LEAF_MAX bytes (default 2048). New data which itself is +** larger than STANDALONE_MIN (default 1024) is placed in a standalone +** node (a leaf node with a single term and doclist). The goal of +** these settings is to pack together groups of small doclists while +** making it efficient to directly access large doclists. The +** assumption is that large doclists represent terms which are more +** likely to be query targets. +** +** TODO(shess) It may be useful for blocking decisions to be more +** dynamic. For instance, it may make more sense to have a 2.5k leaf +** node rather than splitting into 2k and .5k nodes. My intuition is +** that this might extend through 2x or 4x the pagesize. +** +** +**** Segment interior nodes **** +** Segment interior nodes store blockids for subtree nodes and terms +** to describe what data is stored by the each subtree. Interior +** nodes are written using InteriorWriter, and read using +** InteriorReader. InteriorWriters are created as needed when +** SegmentWriter creates new leaf nodes, or when an interior node +** itself grows too big and must be split. The format of interior +** nodes: +** +** varint iHeight; (height from leaf level, always >0) +** varint iBlockid; (block id of node's leftmost subtree) +** optional { +** varint nTerm; (length of first term) +** char pTerm[nTerm]; (content of first term) +** array { +** (further terms are delta-encoded) +** varint nPrefix; (length of shared prefix with previous term) +** varint nSuffix; (length of unshared suffix) +** char pTermSuffix[nSuffix]; (unshared suffix of next term) +** } +** } +** +** Here, optional { X } means an optional element, while array { X } +** means zero or more occurrences of X, adjacent in memory. +** +** An interior node encodes n terms separating n+1 subtrees. The +** subtree blocks are contiguous, so only the first subtree's blockid +** is encoded. The subtree at iBlockid will contain all terms less +** than the first term encoded (or all terms if no term is encoded). +** Otherwise, for terms greater than or equal to pTerm[i] but less +** than pTerm[i+1], the subtree for that term will be rooted at +** iBlockid+i. Interior nodes only store enough term data to +** distinguish adjacent children (if the rightmost term of the left +** child is "something", and the leftmost term of the right child is +** "wicked", only "w" is stored). +** +** New data is spilled to a new interior node at the same height when +** the current node exceeds INTERIOR_MAX bytes (default 2048). +** INTERIOR_MIN_TERMS (default 7) keeps large terms from monopolizing +** interior nodes and making the tree too skinny. The interior nodes +** at a given height are naturally tracked by interior nodes at +** height+1, and so on. +** +** +**** Segment directory **** +** The segment directory in table %_segdir stores meta-information for +** merging and deleting segments, and also the root node of the +** segment's tree. +** +** The root node is the top node of the segment's tree after encoding +** the entire segment, restricted to ROOT_MAX bytes (default 1024). +** This could be either a leaf node or an interior node. If the top +** node requires more than ROOT_MAX bytes, it is flushed to %_segments +** and a new root interior node is generated (which should always fit +** within ROOT_MAX because it only needs space for 2 varints, the +** height and the blockid of the previous root). +** +** The meta-information in the segment directory is: +** level - segment level (see below) +** idx - index within level +** - (level,idx uniquely identify a segment) +** start_block - first leaf node +** leaves_end_block - last leaf node +** end_block - last block (including interior nodes) +** root - contents of root node +** +** If the root node is a leaf node, then start_block, +** leaves_end_block, and end_block are all 0. +** +** +**** Segment merging **** +** To amortize update costs, segments are grouped into levels and +** merged in batches. Each increase in level represents exponentially +** more documents. +** +** New documents (actually, document updates) are tokenized and +** written individually (using LeafWriter) to a level 0 segment, with +** incrementing idx. When idx reaches MERGE_COUNT (default 16), all +** level 0 segments are merged into a single level 1 segment. Level 1 +** is populated like level 0, and eventually MERGE_COUNT level 1 +** segments are merged to a single level 2 segment (representing +** MERGE_COUNT^2 updates), and so on. +** +** A segment merge traverses all segments at a given level in +** parallel, performing a straightforward sorted merge. Since segment +** leaf nodes are written in to the %_segments table in order, this +** merge traverses the underlying sqlite disk structures efficiently. +** After the merge, all segment blocks from the merged level are +** deleted. +** +** MERGE_COUNT controls how often we merge segments. 16 seems to be +** somewhat of a sweet spot for insertion performance. 32 and 64 show +** very similar performance numbers to 16 on insertion, though they're +** a tiny bit slower (perhaps due to more overhead in merge-time +** sorting). 8 is about 20% slower than 16, 4 about 50% slower than +** 16, 2 about 66% slower than 16. +** +** At query time, high MERGE_COUNT increases the number of segments +** which need to be scanned and merged. For instance, with 100k docs +** inserted: +** +** MERGE_COUNT segments +** 16 25 +** 8 12 +** 4 10 +** 2 6 +** +** This appears to have only a moderate impact on queries for very +** frequent terms (which are somewhat dominated by segment merge +** costs), and infrequent and non-existent terms still seem to be fast +** even with many segments. +** +** TODO(shess) That said, it would be nice to have a better query-side +** argument for MERGE_COUNT of 16. Also, it is possible/likely that +** optimizations to things like doclist merging will swing the sweet +** spot around. +** +** +** +**** Handling of deletions and updates **** +** Since we're using a segmented structure, with no docid-oriented +** index into the term index, we clearly cannot simply update the term +** index when a document is deleted or updated. For deletions, we +** write an empty doclist (varint(docid) varint(POS_END)), for updates +** we simply write the new doclist. Segment merges overwrite older +** data for a particular docid with newer data, so deletes or updates +** will eventually overtake the earlier data and knock it out. The +** query logic likewise merges doclists so that newer data knocks out +** older data. */ -SQLITE_API void *sqlite3_commit_hook( - sqlite3 *db, /* Attach the hook to this database */ - int (*xCallback)(void*), /* Function to invoke on each commit */ - void *pArg /* Argument to the function */ -){ - void *pOld; - sqlite3_mutex_enter(db->mutex); - pOld = db->pCommitArg; - db->xCommitCallback = xCallback; - db->pCommitArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pOld; -} +/************** Include fts3Int.h in the middle of fts3.c ********************/ +/************** Begin file fts3Int.h *****************************************/ /* -** Register a callback to be invoked each time a row is updated, -** inserted or deleted using this database connection. -*/ -SQLITE_API void *sqlite3_update_hook( - sqlite3 *db, /* Attach the hook to this database */ - void (*xCallback)(void*,int,char const *,char const *,sqlite_int64), - void *pArg /* Argument to the function */ -){ - void *pRet; - sqlite3_mutex_enter(db->mutex); - pRet = db->pUpdateArg; - db->xUpdateCallback = xCallback; - db->pUpdateArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pRet; -} +** 2009 Nov 12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +*/ +#ifndef _FTSINT_H +#define _FTSINT_H + +#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) +# define NDEBUG 1 +#endif /* -** Register a callback to be invoked each time a transaction is rolled -** back by this database connection. +** FTS4 is really an extension for FTS3. It is enabled using the +** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also all +** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3. */ -SQLITE_API void *sqlite3_rollback_hook( - sqlite3 *db, /* Attach the hook to this database */ - void (*xCallback)(void*), /* Callback function */ - void *pArg /* Argument to the function */ -){ - void *pRet; - sqlite3_mutex_enter(db->mutex); - pRet = db->pRollbackArg; - db->xRollbackCallback = xCallback; - db->pRollbackArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pRet; -} +#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3) +# define SQLITE_ENABLE_FTS3 +#endif -#ifndef SQLITE_OMIT_WAL -/* -** The sqlite3_wal_hook() callback registered by sqlite3_wal_autocheckpoint(). -** Invoke sqlite3_wal_checkpoint if the number of frames in the log file -** is greater than sqlite3.pWalArg cast to an integer (the value configured by -** wal_autocheckpoint()). -*/ -SQLITE_PRIVATE int sqlite3WalDefaultHook( - void *pClientData, /* Argument */ - sqlite3 *db, /* Connection */ - const char *zDb, /* Database */ - int nFrame /* Size of WAL */ -){ - if( nFrame>=SQLITE_PTR_TO_INT(pClientData) ){ - sqlite3BeginBenignMalloc(); - sqlite3_wal_checkpoint(db, zDb); - sqlite3EndBenignMalloc(); - } - return SQLITE_OK; -} -#endif /* SQLITE_OMIT_WAL */ +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + +/* If not building as part of the core, include sqlite3ext.h. */ +#ifndef SQLITE_CORE +SQLITE_EXTENSION_INIT3 +#endif +/************** Include fts3_tokenizer.h in the middle of fts3Int.h **********/ +/************** Begin file fts3_tokenizer.h **********************************/ /* -** Configure an sqlite3_wal_hook() callback to automatically checkpoint -** a database after committing a transaction if there are nFrame or -** more frames in the log file. Passing zero or a negative value as the -** nFrame parameter disables automatic checkpoints entirely. +** 2006 July 10 ** -** The callback registered by this function replaces any existing callback -** registered using sqlite3_wal_hook(). Likewise, registering a callback -** using sqlite3_wal_hook() disables the automatic checkpoint mechanism -** configured by this function. +** The author disclaims copyright to this source code. +** +************************************************************************* +** Defines the interface to tokenizers used by fulltext-search. There +** are three basic components: +** +** sqlite3_tokenizer_module is a singleton defining the tokenizer +** interface functions. This is essentially the class structure for +** tokenizers. +** +** sqlite3_tokenizer is used to define a particular tokenizer, perhaps +** including customization information defined at creation time. +** +** sqlite3_tokenizer_cursor is generated by a tokenizer to generate +** tokens from a particular input. */ -SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){ -#ifdef SQLITE_OMIT_WAL - UNUSED_PARAMETER(db); - UNUSED_PARAMETER(nFrame); -#else - if( nFrame>0 ){ - sqlite3_wal_hook(db, sqlite3WalDefaultHook, SQLITE_INT_TO_PTR(nFrame)); - }else{ - sqlite3_wal_hook(db, 0, 0); - } -#endif - return SQLITE_OK; -} +#ifndef _FTS3_TOKENIZER_H_ +#define _FTS3_TOKENIZER_H_ -/* -** Register a callback to be invoked each time a transaction is written -** into the write-ahead-log by this database connection. +/* TODO(shess) Only used for SQLITE_OK and SQLITE_DONE at this time. +** If tokenizers are to be allowed to call sqlite3_*() functions, then +** we will need a way to register the API consistently. */ -SQLITE_API void *sqlite3_wal_hook( - sqlite3 *db, /* Attach the hook to this db handle */ - int(*xCallback)(void *, sqlite3*, const char*, int), - void *pArg /* First argument passed to xCallback() */ -){ -#ifndef SQLITE_OMIT_WAL - void *pRet; - sqlite3_mutex_enter(db->mutex); - pRet = db->pWalArg; - db->xWalCallback = xCallback; - db->pWalArg = pArg; - sqlite3_mutex_leave(db->mutex); - return pRet; -#else - return 0; -#endif -} /* -** Checkpoint database zDb. +** Structures used by the tokenizer interface. When a new tokenizer +** implementation is registered, the caller provides a pointer to +** an sqlite3_tokenizer_module containing pointers to the callback +** functions that make up an implementation. +** +** When an fts3 table is created, it passes any arguments passed to +** the tokenizer clause of the CREATE VIRTUAL TABLE statement to the +** sqlite3_tokenizer_module.xCreate() function of the requested tokenizer +** implementation. The xCreate() function in turn returns an +** sqlite3_tokenizer structure representing the specific tokenizer to +** be used for the fts3 table (customized by the tokenizer clause arguments). +** +** To tokenize an input buffer, the sqlite3_tokenizer_module.xOpen() +** method is called. It returns an sqlite3_tokenizer_cursor object +** that may be used to tokenize a specific input buffer based on +** the tokenization rules supplied by a specific sqlite3_tokenizer +** object. */ -SQLITE_API int sqlite3_wal_checkpoint_v2( - sqlite3 *db, /* Database handle */ - const char *zDb, /* Name of attached database (or NULL) */ - int eMode, /* SQLITE_CHECKPOINT_* value */ - int *pnLog, /* OUT: Size of WAL log in frames */ - int *pnCkpt /* OUT: Total number of frames checkpointed */ -){ -#ifdef SQLITE_OMIT_WAL - return SQLITE_OK; -#else - int rc; /* Return code */ - int iDb = SQLITE_MAX_ATTACHED; /* sqlite3.aDb[] index of db to checkpoint */ +typedef struct sqlite3_tokenizer_module sqlite3_tokenizer_module; +typedef struct sqlite3_tokenizer sqlite3_tokenizer; +typedef struct sqlite3_tokenizer_cursor sqlite3_tokenizer_cursor; - /* Initialize the output variables to -1 in case an error occurs. */ - if( pnLog ) *pnLog = -1; - if( pnCkpt ) *pnCkpt = -1; +struct sqlite3_tokenizer_module { - assert( SQLITE_CHECKPOINT_FULL>SQLITE_CHECKPOINT_PASSIVE ); - assert( SQLITE_CHECKPOINT_FULLSQLITE_CHECKPOINT_RESTART ){ - return SQLITE_MISUSE; - } + /* + ** Structure version. Should always be set to 0 or 1. + */ + int iVersion; - sqlite3_mutex_enter(db->mutex); - if( zDb && zDb[0] ){ - iDb = sqlite3FindDbName(db, zDb); - } - if( iDb<0 ){ - rc = SQLITE_ERROR; - sqlite3Error(db, SQLITE_ERROR, "unknown database: %s", zDb); - }else{ - rc = sqlite3Checkpoint(db, iDb, eMode, pnLog, pnCkpt); - sqlite3Error(db, rc, 0); - } - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; -#endif -} + /* + ** Create a new tokenizer. The values in the argv[] array are the + ** arguments passed to the "tokenizer" clause of the CREATE VIRTUAL + ** TABLE statement that created the fts3 table. For example, if + ** the following SQL is executed: + ** + ** CREATE .. USING fts3( ... , tokenizer arg1 arg2) + ** + ** then argc is set to 2, and the argv[] array contains pointers + ** to the strings "arg1" and "arg2". + ** + ** This method should return either SQLITE_OK (0), or an SQLite error + ** code. If SQLITE_OK is returned, then *ppTokenizer should be set + ** to point at the newly created tokenizer structure. The generic + ** sqlite3_tokenizer.pModule variable should not be initialized by + ** this callback. The caller will do so. + */ + int (*xCreate)( + int argc, /* Size of argv array */ + const char *const*argv, /* Tokenizer argument strings */ + sqlite3_tokenizer **ppTokenizer /* OUT: Created tokenizer */ + ); + /* + ** Destroy an existing tokenizer. The fts3 module calls this method + ** exactly once for each successful call to xCreate(). + */ + int (*xDestroy)(sqlite3_tokenizer *pTokenizer); -/* -** Checkpoint database zDb. If zDb is NULL, or if the buffer zDb points -** to contains a zero-length string, all attached databases are -** checkpointed. -*/ -SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){ - return sqlite3_wal_checkpoint_v2(db, zDb, SQLITE_CHECKPOINT_PASSIVE, 0, 0); -} + /* + ** Create a tokenizer cursor to tokenize an input buffer. The caller + ** is responsible for ensuring that the input buffer remains valid + ** until the cursor is closed (using the xClose() method). + */ + int (*xOpen)( + sqlite3_tokenizer *pTokenizer, /* Tokenizer object */ + const char *pInput, int nBytes, /* Input buffer */ + sqlite3_tokenizer_cursor **ppCursor /* OUT: Created tokenizer cursor */ + ); -#ifndef SQLITE_OMIT_WAL + /* + ** Destroy an existing tokenizer cursor. The fts3 module calls this + ** method exactly once for each successful call to xOpen(). + */ + int (*xClose)(sqlite3_tokenizer_cursor *pCursor); + + /* + ** Retrieve the next token from the tokenizer cursor pCursor. This + ** method should either return SQLITE_OK and set the values of the + ** "OUT" variables identified below, or SQLITE_DONE to indicate that + ** the end of the buffer has been reached, or an SQLite error code. + ** + ** *ppToken should be set to point at a buffer containing the + ** normalized version of the token (i.e. after any case-folding and/or + ** stemming has been performed). *pnBytes should be set to the length + ** of this buffer in bytes. The input text that generated the token is + ** identified by the byte offsets returned in *piStartOffset and + ** *piEndOffset. *piStartOffset should be set to the index of the first + ** byte of the token in the input buffer. *piEndOffset should be set + ** to the index of the first byte just past the end of the token in + ** the input buffer. + ** + ** The buffer *ppToken is set to point at is managed by the tokenizer + ** implementation. It is only required to be valid until the next call + ** to xNext() or xClose(). + */ + /* TODO(shess) current implementation requires pInput to be + ** nul-terminated. This should either be fixed, or pInput/nBytes + ** should be converted to zInput. + */ + int (*xNext)( + sqlite3_tokenizer_cursor *pCursor, /* Tokenizer cursor */ + const char **ppToken, int *pnBytes, /* OUT: Normalized text for token */ + int *piStartOffset, /* OUT: Byte offset of token in input buffer */ + int *piEndOffset, /* OUT: Byte offset of end of token in input buffer */ + int *piPosition /* OUT: Number of tokens returned before this one */ + ); + + /*********************************************************************** + ** Methods below this point are only available if iVersion>=1. + */ + + /* + ** Configure the language id of a tokenizer cursor. + */ + int (*xLanguageid)(sqlite3_tokenizer_cursor *pCsr, int iLangid); +}; + +struct sqlite3_tokenizer { + const sqlite3_tokenizer_module *pModule; /* The module for this tokenizer */ + /* Tokenizer implementations will typically add additional fields */ +}; + +struct sqlite3_tokenizer_cursor { + sqlite3_tokenizer *pTokenizer; /* Tokenizer for this cursor. */ + /* Tokenizer implementations will typically add additional fields */ +}; + +int fts3_global_term_cnt(int iTerm, int iCol); +int fts3_term_cnt(int iTerm, int iCol); + + +#endif /* _FTS3_TOKENIZER_H_ */ + +/************** End of fts3_tokenizer.h **************************************/ +/************** Continuing where we left off in fts3Int.h ********************/ +/************** Include fts3_hash.h in the middle of fts3Int.h ***************/ +/************** Begin file fts3_hash.h ***************************************/ /* -** Run a checkpoint on database iDb. This is a no-op if database iDb is -** not currently open in WAL mode. +** 2001 September 22 ** -** If a transaction is open on the database being checkpointed, this -** function returns SQLITE_LOCKED and a checkpoint is not attempted. If -** an error occurs while running the checkpoint, an SQLite error code is -** returned (i.e. SQLITE_IOERR). Otherwise, SQLITE_OK. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** The mutex on database handle db should be held by the caller. The mutex -** associated with the specific b-tree being checkpointed is taken by -** this function while the checkpoint is running. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** If iDb is passed SQLITE_MAX_ATTACHED, then all attached databases are -** checkpointed. If an error is encountered it is returned immediately - -** no attempt is made to checkpoint any remaining databases. +************************************************************************* +** This is the header file for the generic hash-table implementation +** used in SQLite. We've modified it slightly to serve as a standalone +** hash table implementation for the full-text indexing module. ** -** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART. */ -SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){ - int rc = SQLITE_OK; /* Return code */ - int i; /* Used to iterate through attached dbs */ - int bBusy = 0; /* True if SQLITE_BUSY has been encountered */ +#ifndef _FTS3_HASH_H_ +#define _FTS3_HASH_H_ - assert( sqlite3_mutex_held(db->mutex) ); - assert( !pnLog || *pnLog==-1 ); - assert( !pnCkpt || *pnCkpt==-1 ); +/* Forward declarations of structures. */ +typedef struct Fts3Hash Fts3Hash; +typedef struct Fts3HashElem Fts3HashElem; - for(i=0; inDb && rc==SQLITE_OK; i++){ - if( i==iDb || iDb==SQLITE_MAX_ATTACHED ){ - rc = sqlite3BtreeCheckpoint(db->aDb[i].pBt, eMode, pnLog, pnCkpt); - pnLog = 0; - pnCkpt = 0; - if( rc==SQLITE_BUSY ){ - bBusy = 1; - rc = SQLITE_OK; - } - } - } +/* A complete hash table is an instance of the following structure. +** The internals of this structure are intended to be opaque -- client +** code should not attempt to access or modify the fields of this structure +** directly. Change this structure only by using the routines below. +** However, many of the "procedures" and "functions" for modifying and +** accessing this structure are really macros, so we can't really make +** this structure opaque. +*/ +struct Fts3Hash { + char keyClass; /* HASH_INT, _POINTER, _STRING, _BINARY */ + char copyKey; /* True if copy of key made on insert */ + int count; /* Number of entries in this table */ + Fts3HashElem *first; /* The first element of the array */ + int htsize; /* Number of buckets in the hash table */ + struct _fts3ht { /* the hash table */ + int count; /* Number of entries with this hash */ + Fts3HashElem *chain; /* Pointer to first entry with this hash */ + } *ht; +}; - return (rc==SQLITE_OK && bBusy) ? SQLITE_BUSY : rc; -} -#endif /* SQLITE_OMIT_WAL */ +/* Each element in the hash table is an instance of the following +** structure. All elements are stored on a single doubly-linked list. +** +** Again, this structure is intended to be opaque, but it can't really +** be opaque because it is used by macros. +*/ +struct Fts3HashElem { + Fts3HashElem *next, *prev; /* Next and previous elements in the table */ + void *data; /* Data associated with this element */ + void *pKey; int nKey; /* Key associated with this element */ +}; /* -** This function returns true if main-memory should be used instead of -** a temporary file for transient pager files and statement journals. -** The value returned depends on the value of db->temp_store (runtime -** parameter) and the compile time value of SQLITE_TEMP_STORE. The -** following table describes the relationship between these two values -** and this functions return value. +** There are 2 different modes of operation for a hash table: ** -** SQLITE_TEMP_STORE db->temp_store Location of temporary database -** ----------------- -------------- ------------------------------ -** 0 any file (return 0) -** 1 1 file (return 0) -** 1 2 memory (return 1) -** 1 0 file (return 0) -** 2 1 file (return 0) -** 2 2 memory (return 1) -** 2 0 memory (return 1) -** 3 any memory (return 1) +** FTS3_HASH_STRING pKey points to a string that is nKey bytes long +** (including the null-terminator, if any). Case +** is respected in comparisons. +** +** FTS3_HASH_BINARY pKey points to binary data nKey bytes long. +** memcmp() is used to compare keys. +** +** A copy of the key is made if the copyKey parameter to fts3HashInit is 1. */ -SQLITE_PRIVATE int sqlite3TempInMemory(const sqlite3 *db){ -#if SQLITE_TEMP_STORE==1 - return ( db->temp_store==2 ); -#endif -#if SQLITE_TEMP_STORE==2 - return ( db->temp_store!=1 ); -#endif -#if SQLITE_TEMP_STORE==3 - return 1; -#endif -#if SQLITE_TEMP_STORE<1 || SQLITE_TEMP_STORE>3 - return 0; -#endif -} +#define FTS3_HASH_STRING 1 +#define FTS3_HASH_BINARY 2 /* -** Return UTF-8 encoded English language explanation of the most recent -** error. +** Access routines. To delete, insert a NULL pointer. */ -SQLITE_API const char *sqlite3_errmsg(sqlite3 *db){ - const char *z; - if( !db ){ - return sqlite3ErrStr(SQLITE_NOMEM); - } - if( !sqlite3SafetyCheckSickOrOk(db) ){ - return sqlite3ErrStr(SQLITE_MISUSE_BKPT); - } - sqlite3_mutex_enter(db->mutex); - if( db->mallocFailed ){ - z = sqlite3ErrStr(SQLITE_NOMEM); - }else{ - z = (char*)sqlite3_value_text(db->pErr); - assert( !db->mallocFailed ); - if( z==0 ){ - z = sqlite3ErrStr(db->errCode); - } - } - sqlite3_mutex_leave(db->mutex); - return z; -} +SQLITE_PRIVATE void sqlite3Fts3HashInit(Fts3Hash *pNew, char keyClass, char copyKey); +SQLITE_PRIVATE void *sqlite3Fts3HashInsert(Fts3Hash*, const void *pKey, int nKey, void *pData); +SQLITE_PRIVATE void *sqlite3Fts3HashFind(const Fts3Hash*, const void *pKey, int nKey); +SQLITE_PRIVATE void sqlite3Fts3HashClear(Fts3Hash*); +SQLITE_PRIVATE Fts3HashElem *sqlite3Fts3HashFindElem(const Fts3Hash *, const void *, int); -#ifndef SQLITE_OMIT_UTF16 /* -** Return UTF-16 encoded English language explanation of the most recent -** error. +** Shorthand for the functions above */ -SQLITE_API const void *sqlite3_errmsg16(sqlite3 *db){ - static const u16 outOfMem[] = { - 'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0 - }; - static const u16 misuse[] = { - 'l', 'i', 'b', 'r', 'a', 'r', 'y', ' ', - 'r', 'o', 'u', 't', 'i', 'n', 'e', ' ', - 'c', 'a', 'l', 'l', 'e', 'd', ' ', - 'o', 'u', 't', ' ', - 'o', 'f', ' ', - 's', 'e', 'q', 'u', 'e', 'n', 'c', 'e', 0 - }; - - const void *z; - if( !db ){ - return (void *)outOfMem; - } - if( !sqlite3SafetyCheckSickOrOk(db) ){ - return (void *)misuse; - } - sqlite3_mutex_enter(db->mutex); - if( db->mallocFailed ){ - z = (void *)outOfMem; - }else{ - z = sqlite3_value_text16(db->pErr); - if( z==0 ){ - sqlite3ValueSetStr(db->pErr, -1, sqlite3ErrStr(db->errCode), - SQLITE_UTF8, SQLITE_STATIC); - z = sqlite3_value_text16(db->pErr); - } - /* A malloc() may have failed within the call to sqlite3_value_text16() - ** above. If this is the case, then the db->mallocFailed flag needs to - ** be cleared before returning. Do this directly, instead of via - ** sqlite3ApiExit(), to avoid setting the database handle error message. - */ - db->mallocFailed = 0; - } - sqlite3_mutex_leave(db->mutex); - return z; -} -#endif /* SQLITE_OMIT_UTF16 */ +#define fts3HashInit sqlite3Fts3HashInit +#define fts3HashInsert sqlite3Fts3HashInsert +#define fts3HashFind sqlite3Fts3HashFind +#define fts3HashClear sqlite3Fts3HashClear +#define fts3HashFindElem sqlite3Fts3HashFindElem /* -** Return the most recent error code generated by an SQLite routine. If NULL is -** passed to this function, we assume a malloc() failed during sqlite3_open(). -*/ -SQLITE_API int sqlite3_errcode(sqlite3 *db){ - if( db && !sqlite3SafetyCheckSickOrOk(db) ){ - return SQLITE_MISUSE_BKPT; - } - if( !db || db->mallocFailed ){ - return SQLITE_NOMEM; - } - return db->errCode & db->errMask; -} -SQLITE_API int sqlite3_extended_errcode(sqlite3 *db){ - if( db && !sqlite3SafetyCheckSickOrOk(db) ){ - return SQLITE_MISUSE_BKPT; - } - if( !db || db->mallocFailed ){ - return SQLITE_NOMEM; - } - return db->errCode; -} +** Macros for looping over all elements of a hash table. The idiom is +** like this: +** +** Fts3Hash h; +** Fts3HashElem *p; +** ... +** for(p=fts3HashFirst(&h); p; p=fts3HashNext(p)){ +** SomeStructure *pData = fts3HashData(p); +** // do something with pData +** } +*/ +#define fts3HashFirst(H) ((H)->first) +#define fts3HashNext(E) ((E)->next) +#define fts3HashData(E) ((E)->data) +#define fts3HashKey(E) ((E)->pKey) +#define fts3HashKeysize(E) ((E)->nKey) /* -** Create a new collating function for database "db". The name is zName -** and the encoding is enc. +** Number of entries in a hash table */ -static int createCollation( - sqlite3* db, - const char *zName, - u8 enc, - u8 collType, - void* pCtx, - int(*xCompare)(void*,int,const void*,int,const void*), - void(*xDel)(void*) -){ - CollSeq *pColl; - int enc2; - int nName = sqlite3Strlen30(zName); - - assert( sqlite3_mutex_held(db->mutex) ); +#define fts3HashCount(H) ((H)->count) - /* If SQLITE_UTF16 is specified as the encoding type, transform this - ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the - ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. - */ - enc2 = enc; - testcase( enc2==SQLITE_UTF16 ); - testcase( enc2==SQLITE_UTF16_ALIGNED ); - if( enc2==SQLITE_UTF16 || enc2==SQLITE_UTF16_ALIGNED ){ - enc2 = SQLITE_UTF16NATIVE; - } - if( enc2SQLITE_UTF16BE ){ - return SQLITE_MISUSE_BKPT; - } +#endif /* _FTS3_HASH_H_ */ - /* Check if this call is removing or replacing an existing collation - ** sequence. If so, and there are active VMs, return busy. If there - ** are no active VMs, invalidate any pre-compiled statements. - */ - pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 0); - if( pColl && pColl->xCmp ){ - if( db->activeVdbeCnt ){ - sqlite3Error(db, SQLITE_BUSY, - "unable to delete/modify collation sequence due to active statements"); - return SQLITE_BUSY; - } - sqlite3ExpirePreparedStatements(db); +/************** End of fts3_hash.h *******************************************/ +/************** Continuing where we left off in fts3Int.h ********************/ - /* If collation sequence pColl was created directly by a call to - ** sqlite3_create_collation, and not generated by synthCollSeq(), - ** then any copies made by synthCollSeq() need to be invalidated. - ** Also, collation destructor - CollSeq.xDel() - function may need - ** to be called. - */ - if( (pColl->enc & ~SQLITE_UTF16_ALIGNED)==enc2 ){ - CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName, nName); - int j; - for(j=0; j<3; j++){ - CollSeq *p = &aColl[j]; - if( p->enc==pColl->enc ){ - if( p->xDel ){ - p->xDel(p->pUser); - } - p->xCmp = 0; - } - } - } - } +/* +** This constant determines the maximum depth of an FTS expression tree +** that the library will create and use. FTS uses recursion to perform +** various operations on the query tree, so the disadvantage of a large +** limit is that it may allow very large queries to use large amounts +** of stack space (perhaps causing a stack overflow). +*/ +#ifndef SQLITE_FTS3_MAX_EXPR_DEPTH +# define SQLITE_FTS3_MAX_EXPR_DEPTH 12 +#endif - pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 1); - if( pColl==0 ) return SQLITE_NOMEM; - pColl->xCmp = xCompare; - pColl->pUser = pCtx; - pColl->xDel = xDel; - pColl->enc = (u8)(enc2 | (enc & SQLITE_UTF16_ALIGNED)); - pColl->type = collType; - sqlite3Error(db, SQLITE_OK, 0); - return SQLITE_OK; -} +/* +** This constant controls how often segments are merged. Once there are +** FTS3_MERGE_COUNT segments of level N, they are merged into a single +** segment of level N+1. +*/ +#define FTS3_MERGE_COUNT 16 /* -** This array defines hard upper bounds on limit values. The -** initializer must be kept in sync with the SQLITE_LIMIT_* -** #defines in sqlite3.h. +** This is the maximum amount of data (in bytes) to store in the +** Fts3Table.pendingTerms hash table. Normally, the hash table is +** populated as documents are inserted/updated/deleted in a transaction +** and used to create a new segment when the transaction is committed. +** However if this limit is reached midway through a transaction, a new +** segment is created and the hash table cleared immediately. */ -static const int aHardLimit[] = { - SQLITE_MAX_LENGTH, - SQLITE_MAX_SQL_LENGTH, - SQLITE_MAX_COLUMN, - SQLITE_MAX_EXPR_DEPTH, - SQLITE_MAX_COMPOUND_SELECT, - SQLITE_MAX_VDBE_OP, - SQLITE_MAX_FUNCTION_ARG, - SQLITE_MAX_ATTACHED, - SQLITE_MAX_LIKE_PATTERN_LENGTH, - SQLITE_MAX_VARIABLE_NUMBER, - SQLITE_MAX_TRIGGER_DEPTH, -}; +#define FTS3_MAX_PENDING_DATA (1*1024*1024) /* -** Make sure the hard limits are set to reasonable values +** Macro to return the number of elements in an array. SQLite has a +** similar macro called ArraySize(). Use a different name to avoid +** a collision when building an amalgamation with built-in FTS3. */ -#if SQLITE_MAX_LENGTH<100 -# error SQLITE_MAX_LENGTH must be at least 100 -#endif -#if SQLITE_MAX_SQL_LENGTH<100 -# error SQLITE_MAX_SQL_LENGTH must be at least 100 -#endif -#if SQLITE_MAX_SQL_LENGTH>SQLITE_MAX_LENGTH -# error SQLITE_MAX_SQL_LENGTH must not be greater than SQLITE_MAX_LENGTH -#endif -#if SQLITE_MAX_COMPOUND_SELECT<2 -# error SQLITE_MAX_COMPOUND_SELECT must be at least 2 -#endif -#if SQLITE_MAX_VDBE_OP<40 -# error SQLITE_MAX_VDBE_OP must be at least 40 -#endif -#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>1000 -# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 1000 -#endif -#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>62 -# error SQLITE_MAX_ATTACHED must be between 0 and 62 -#endif -#if SQLITE_MAX_LIKE_PATTERN_LENGTH<1 -# error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1 -#endif -#if SQLITE_MAX_COLUMN>32767 -# error SQLITE_MAX_COLUMN must not exceed 32767 +#define SizeofArray(X) ((int)(sizeof(X)/sizeof(X[0]))) + + +#ifndef MIN +# define MIN(x,y) ((x)<(y)?(x):(y)) #endif -#if SQLITE_MAX_TRIGGER_DEPTH<1 -# error SQLITE_MAX_TRIGGER_DEPTH must be at least 1 +#ifndef MAX +# define MAX(x,y) ((x)>(y)?(x):(y)) #endif +/* +** Maximum length of a varint encoded integer. The varint format is different +** from that used by SQLite, so the maximum length is 10, not 9. +*/ +#define FTS3_VARINT_MAX 10 /* -** Change the value of a limit. Report the old value. -** If an invalid limit index is supplied, report -1. -** Make no changes but still report the old value if the -** new limit is negative. +** FTS4 virtual tables may maintain multiple indexes - one index of all terms +** in the document set and zero or more prefix indexes. All indexes are stored +** as one or more b+-trees in the %_segments and %_segdir tables. ** -** A new lower limit does not shrink existing constructs. -** It merely prevents new constructs that exceed the limit -** from forming. +** It is possible to determine which index a b+-tree belongs to based on the +** value stored in the "%_segdir.level" column. Given this value L, the index +** that the b+-tree belongs to is (L<<10). In other words, all b+-trees with +** level values between 0 and 1023 (inclusive) belong to index 0, all levels +** between 1024 and 2047 to index 1, and so on. +** +** It is considered impossible for an index to use more than 1024 levels. In +** theory though this may happen, but only after at least +** (FTS3_MERGE_COUNT^1024) separate flushes of the pending-terms tables. */ -SQLITE_API int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){ - int oldLimit; +#define FTS3_SEGDIR_MAXLEVEL 1024 +#define FTS3_SEGDIR_MAXLEVEL_STR "1024" +/* +** The testcase() macro is only used by the amalgamation. If undefined, +** make it a no-op. +*/ +#ifndef testcase +# define testcase(X) +#endif - /* EVIDENCE-OF: R-30189-54097 For each limit category SQLITE_LIMIT_NAME - ** there is a hard upper bound set at compile-time by a C preprocessor - ** macro called SQLITE_MAX_NAME. (The "_LIMIT_" in the name is changed to - ** "_MAX_".) - */ - assert( aHardLimit[SQLITE_LIMIT_LENGTH]==SQLITE_MAX_LENGTH ); - assert( aHardLimit[SQLITE_LIMIT_SQL_LENGTH]==SQLITE_MAX_SQL_LENGTH ); - assert( aHardLimit[SQLITE_LIMIT_COLUMN]==SQLITE_MAX_COLUMN ); - assert( aHardLimit[SQLITE_LIMIT_EXPR_DEPTH]==SQLITE_MAX_EXPR_DEPTH ); - assert( aHardLimit[SQLITE_LIMIT_COMPOUND_SELECT]==SQLITE_MAX_COMPOUND_SELECT); - assert( aHardLimit[SQLITE_LIMIT_VDBE_OP]==SQLITE_MAX_VDBE_OP ); - assert( aHardLimit[SQLITE_LIMIT_FUNCTION_ARG]==SQLITE_MAX_FUNCTION_ARG ); - assert( aHardLimit[SQLITE_LIMIT_ATTACHED]==SQLITE_MAX_ATTACHED ); - assert( aHardLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]== - SQLITE_MAX_LIKE_PATTERN_LENGTH ); - assert( aHardLimit[SQLITE_LIMIT_VARIABLE_NUMBER]==SQLITE_MAX_VARIABLE_NUMBER); - assert( aHardLimit[SQLITE_LIMIT_TRIGGER_DEPTH]==SQLITE_MAX_TRIGGER_DEPTH ); - assert( SQLITE_LIMIT_TRIGGER_DEPTH==(SQLITE_N_LIMIT-1) ); +/* +** Terminator values for position-lists and column-lists. +*/ +#define POS_COLUMN (1) /* Column-list terminator */ +#define POS_END (0) /* Position-list terminator */ +/* +** This section provides definitions to allow the +** FTS3 extension to be compiled outside of the +** amalgamation. +*/ +#ifndef SQLITE_AMALGAMATION +/* +** Macros indicating that conditional expressions are always true or +** false. +*/ +#ifdef SQLITE_COVERAGE_TEST +# define ALWAYS(x) (1) +# define NEVER(X) (0) +#else +# define ALWAYS(x) (x) +# define NEVER(x) (x) +#endif - if( limitId<0 || limitId>=SQLITE_N_LIMIT ){ - return -1; - } - oldLimit = db->aLimit[limitId]; - if( newLimit>=0 ){ /* IMP: R-52476-28732 */ - if( newLimit>aHardLimit[limitId] ){ - newLimit = aHardLimit[limitId]; /* IMP: R-51463-25634 */ - } - db->aLimit[limitId] = newLimit; - } - return oldLimit; /* IMP: R-53341-35419 */ -} +/* +** Internal types used by SQLite. +*/ +typedef unsigned char u8; /* 1-byte (or larger) unsigned integer */ +typedef short int i16; /* 2-byte (or larger) signed integer */ +typedef unsigned int u32; /* 4-byte unsigned integer */ +typedef sqlite3_uint64 u64; /* 8-byte unsigned integer */ +typedef sqlite3_int64 i64; /* 8-byte signed integer */ /* -** This function is used to parse both URIs and non-URI filenames passed by the -** user to API functions sqlite3_open() or sqlite3_open_v2(), and for database -** URIs specified as part of ATTACH statements. -** -** The first argument to this function is the name of the VFS to use (or -** a NULL to signify the default VFS) if the URI does not contain a "vfs=xxx" -** query parameter. The second argument contains the URI (or non-URI filename) -** itself. When this function is called the *pFlags variable should contain -** the default flags to open the database handle with. The value stored in -** *pFlags may be updated before returning if the URI filename contains -** "cache=xxx" or "mode=xxx" query parameters. -** -** If successful, SQLITE_OK is returned. In this case *ppVfs is set to point to -** the VFS that should be used to open the database file. *pzFile is set to -** point to a buffer containing the name of the file to open. It is the -** responsibility of the caller to eventually call sqlite3_free() to release -** this buffer. -** -** If an error occurs, then an SQLite error code is returned and *pzErrMsg -** may be set to point to a buffer containing an English language error -** message. It is the responsibility of the caller to eventually release -** this buffer by calling sqlite3_free(). +** Macro used to suppress compiler warnings for unused parameters. */ -SQLITE_PRIVATE int sqlite3ParseUri( - const char *zDefaultVfs, /* VFS to use if no "vfs=xxx" query option */ - const char *zUri, /* Nul-terminated URI to parse */ - unsigned int *pFlags, /* IN/OUT: SQLITE_OPEN_XXX flags */ - sqlite3_vfs **ppVfs, /* OUT: VFS to use */ - char **pzFile, /* OUT: Filename component of URI */ - char **pzErrMsg /* OUT: Error message (if rc!=SQLITE_OK) */ -){ - int rc = SQLITE_OK; - unsigned int flags = *pFlags; - const char *zVfs = zDefaultVfs; - char *zFile; - char c; - int nUri = sqlite3Strlen30(zUri); +#define UNUSED_PARAMETER(x) (void)(x) - assert( *pzErrMsg==0 ); +/* +** Activate assert() only if SQLITE_TEST is enabled. +*/ +#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) +# define NDEBUG 1 +#endif - if( ((flags & SQLITE_OPEN_URI) || sqlite3GlobalConfig.bOpenUri) - && nUri>=5 && memcmp(zUri, "file:", 5)==0 - ){ - char *zOpt; - int eState; /* Parser state when parsing URI */ - int iIn; /* Input character index */ - int iOut = 0; /* Output character index */ - int nByte = nUri+2; /* Bytes of space to allocate */ +/* +** The TESTONLY macro is used to enclose variable declarations or +** other bits of code that are needed to support the arguments +** within testcase() and assert() macros. +*/ +#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) +# define TESTONLY(X) X +#else +# define TESTONLY(X) +#endif - /* Make sure the SQLITE_OPEN_URI flag is set to indicate to the VFS xOpen - ** method that there may be extra parameters following the file-name. */ - flags |= SQLITE_OPEN_URI; +#endif /* SQLITE_AMALGAMATION */ - for(iIn=0; iIn=0 && octet<256 ); - if( octet==0 ){ - /* This branch is taken when "%00" appears within the URI. In this - ** case we ignore all text in the remainder of the path, name or - ** value currently being parsed. So ignore the current character - ** and skip to the next "?", "=" or "&", as appropriate. */ - while( (c = zUri[iIn])!=0 && c!='#' - && (eState!=0 || c!='?') - && (eState!=1 || (c!='=' && c!='&')) - && (eState!=2 || c!='&') - ){ - iIn++; - } - continue; - } - c = octet; - }else if( eState==1 && (c=='&' || c=='=') ){ - if( zFile[iOut-1]==0 ){ - /* An empty option name. Ignore this option altogether. */ - while( zUri[iIn] && zUri[iIn]!='#' && zUri[iIn-1]!='&' ) iIn++; - continue; - } - if( c=='&' ){ - zFile[iOut++] = '\0'; - }else{ - eState = 2; - } - c = 0; - }else if( (eState==0 && c=='?') || (eState==2 && c=='&') ){ - c = 0; - eState = 1; - } - zFile[iOut++] = c; - } - if( eState==1 ) zFile[iOut++] = '\0'; - zFile[iOut++] = '\0'; - zFile[iOut++] = '\0'; + /* Precompiled statements used by the implementation. Each of these + ** statements is run and reset within a single virtual table API call. + */ + sqlite3_stmt *aStmt[40]; - /* Check if there were any options specified that should be interpreted - ** here. Options that are interpreted here include "vfs" and those that - ** correspond to flags that may be passed to the sqlite3_open_v2() - ** method. */ - zOpt = &zFile[sqlite3Strlen30(zFile)+1]; - while( zOpt[0] ){ - int nOpt = sqlite3Strlen30(zOpt); - char *zVal = &zOpt[nOpt+1]; - int nVal = sqlite3Strlen30(zVal); + char *zReadExprlist; + char *zWriteExprlist; - if( nOpt==3 && memcmp("vfs", zOpt, 3)==0 ){ - zVfs = zVal; - }else{ - struct OpenMode { - const char *z; - int mode; - } *aMode = 0; - char *zModeType = 0; - int mask = 0; - int limit = 0; + int nNodeSize; /* Soft limit for node size */ + u8 bFts4; /* True for FTS4, false for FTS3 */ + u8 bHasStat; /* True if %_stat table exists (2==unknown) */ + u8 bHasDocsize; /* True if %_docsize table exists */ + u8 bDescIdx; /* True if doclists are in reverse order */ + u8 bIgnoreSavepoint; /* True to ignore xSavepoint invocations */ + int nPgsz; /* Page size for host database */ + char *zSegmentsTbl; /* Name of %_segments table */ + sqlite3_blob *pSegments; /* Blob handle open on %_segments table */ + + /* + ** The following array of hash tables is used to buffer pending index + ** updates during transactions. All pending updates buffered at any one + ** time must share a common language-id (see the FTS4 langid= feature). + ** The current language id is stored in variable iPrevLangid. + ** + ** A single FTS4 table may have multiple full-text indexes. For each index + ** there is an entry in the aIndex[] array. Index 0 is an index of all the + ** terms that appear in the document set. Each subsequent index in aIndex[] + ** is an index of prefixes of a specific length. + ** + ** Variable nPendingData contains an estimate the memory consumed by the + ** pending data structures, including hash table overhead, but not including + ** malloc overhead. When nPendingData exceeds nMaxPendingData, all hash + ** tables are flushed to disk. Variable iPrevDocid is the docid of the most + ** recently inserted record. + */ + int nIndex; /* Size of aIndex[] */ + struct Fts3Index { + int nPrefix; /* Prefix length (0 for main terms index) */ + Fts3Hash hPending; /* Pending terms table for this index */ + } *aIndex; + int nMaxPendingData; /* Max pending data before flush to disk */ + int nPendingData; /* Current bytes of pending data */ + sqlite_int64 iPrevDocid; /* Docid of most recently inserted document */ + int iPrevLangid; /* Langid of recently inserted document */ + +#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) + /* State variables used for validating that the transaction control + ** methods of the virtual table are called at appropriate times. These + ** values do not contribute to FTS functionality; they are used for + ** verifying the operation of the SQLite core. + */ + int inTransaction; /* True after xBegin but before xCommit/xRollback */ + int mxSavepoint; /* Largest valid xSavepoint integer */ +#endif + +#ifdef SQLITE_TEST + /* True to disable the incremental doclist optimization. This is controled + ** by special insert command 'test-no-incr-doclist'. */ + int bNoIncrDoclist; +#endif +}; + +/* +** When the core wants to read from the virtual table, it creates a +** virtual table cursor (an instance of the following structure) using +** the xOpen method. Cursors are destroyed using the xClose method. +*/ +struct Fts3Cursor { + sqlite3_vtab_cursor base; /* Base class used by SQLite core */ + i16 eSearch; /* Search strategy (see below) */ + u8 isEof; /* True if at End Of Results */ + u8 isRequireSeek; /* True if must seek pStmt to %_content row */ + sqlite3_stmt *pStmt; /* Prepared statement in use by the cursor */ + Fts3Expr *pExpr; /* Parsed MATCH query string */ + int iLangid; /* Language being queried for */ + int nPhrase; /* Number of matchable phrases in query */ + Fts3DeferredToken *pDeferred; /* Deferred search tokens, if any */ + sqlite3_int64 iPrevId; /* Previous id read from aDoclist */ + char *pNextId; /* Pointer into the body of aDoclist */ + char *aDoclist; /* List of docids for full-text queries */ + int nDoclist; /* Size of buffer at aDoclist */ + u8 bDesc; /* True to sort in descending order */ + int eEvalmode; /* An FTS3_EVAL_XX constant */ + int nRowAvg; /* Average size of database rows, in pages */ + sqlite3_int64 nDoc; /* Documents in table */ + i64 iMinDocid; /* Minimum docid to return */ + i64 iMaxDocid; /* Maximum docid to return */ + int isMatchinfoNeeded; /* True when aMatchinfo[] needs filling in */ + u32 *aMatchinfo; /* Information about most recent match */ + int nMatchinfo; /* Number of elements in aMatchinfo[] */ + char *zMatchinfo; /* Matchinfo specification */ +}; + +#define FTS3_EVAL_FILTER 0 +#define FTS3_EVAL_NEXT 1 +#define FTS3_EVAL_MATCHINFO 2 + +/* +** The Fts3Cursor.eSearch member is always set to one of the following. +** Actualy, Fts3Cursor.eSearch can be greater than or equal to +** FTS3_FULLTEXT_SEARCH. If so, then Fts3Cursor.eSearch - 2 is the index +** of the column to be searched. For example, in +** +** CREATE VIRTUAL TABLE ex1 USING fts3(a,b,c,d); +** SELECT docid FROM ex1 WHERE b MATCH 'one two three'; +** +** Because the LHS of the MATCH operator is 2nd column "b", +** Fts3Cursor.eSearch will be set to FTS3_FULLTEXT_SEARCH+1. (+0 for a, +** +1 for b, +2 for c, +3 for d.) If the LHS of MATCH were "ex1" +** indicating that all columns should be searched, +** then eSearch would be set to FTS3_FULLTEXT_SEARCH+4. +*/ +#define FTS3_FULLSCAN_SEARCH 0 /* Linear scan of %_content table */ +#define FTS3_DOCID_SEARCH 1 /* Lookup by rowid on %_content table */ +#define FTS3_FULLTEXT_SEARCH 2 /* Full-text index search */ - if( nOpt==5 && memcmp("cache", zOpt, 5)==0 ){ - static struct OpenMode aCacheMode[] = { - { "shared", SQLITE_OPEN_SHAREDCACHE }, - { "private", SQLITE_OPEN_PRIVATECACHE }, - { 0, 0 } - }; +/* +** The lower 16-bits of the sqlite3_index_info.idxNum value set by +** the xBestIndex() method contains the Fts3Cursor.eSearch value described +** above. The upper 16-bits contain a combination of the following +** bits, used to describe extra constraints on full-text searches. +*/ +#define FTS3_HAVE_LANGID 0x00010000 /* languageid=? */ +#define FTS3_HAVE_DOCID_GE 0x00020000 /* docid>=? */ +#define FTS3_HAVE_DOCID_LE 0x00040000 /* docid<=? */ - mask = SQLITE_OPEN_SHAREDCACHE|SQLITE_OPEN_PRIVATECACHE; - aMode = aCacheMode; - limit = mask; - zModeType = "cache"; - } - if( nOpt==4 && memcmp("mode", zOpt, 4)==0 ){ - static struct OpenMode aOpenMode[] = { - { "ro", SQLITE_OPEN_READONLY }, - { "rw", SQLITE_OPEN_READWRITE }, - { "rwc", SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE }, - { 0, 0 } - }; +struct Fts3Doclist { + char *aAll; /* Array containing doclist (or NULL) */ + int nAll; /* Size of a[] in bytes */ + char *pNextDocid; /* Pointer to next docid */ - mask = SQLITE_OPEN_READONLY|SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE; - aMode = aOpenMode; - limit = mask & flags; - zModeType = "access"; - } + sqlite3_int64 iDocid; /* Current docid (if pList!=0) */ + int bFreeList; /* True if pList should be sqlite3_free()d */ + char *pList; /* Pointer to position list following iDocid */ + int nList; /* Length of position list */ +}; - if( aMode ){ - int i; - int mode = 0; - for(i=0; aMode[i].z; i++){ - const char *z = aMode[i].z; - if( nVal==sqlite3Strlen30(z) && 0==memcmp(zVal, z, nVal) ){ - mode = aMode[i].mode; - break; - } - } - if( mode==0 ){ - *pzErrMsg = sqlite3_mprintf("no such %s mode: %s", zModeType, zVal); - rc = SQLITE_ERROR; - goto parse_uri_out; - } - if( mode>limit ){ - *pzErrMsg = sqlite3_mprintf("%s mode not allowed: %s", - zModeType, zVal); - rc = SQLITE_PERM; - goto parse_uri_out; - } - flags = (flags & ~mask) | mode; - } - } +/* +** A "phrase" is a sequence of one or more tokens that must match in +** sequence. A single token is the base case and the most common case. +** For a sequence of tokens contained in double-quotes (i.e. "one two three") +** nToken will be the number of tokens in the string. +*/ +struct Fts3PhraseToken { + char *z; /* Text of the token */ + int n; /* Number of bytes in buffer z */ + int isPrefix; /* True if token ends with a "*" character */ + int bFirst; /* True if token must appear at position 0 */ - zOpt = &zVal[nVal+1]; - } + /* Variables above this point are populated when the expression is + ** parsed (by code in fts3_expr.c). Below this point the variables are + ** used when evaluating the expression. */ + Fts3DeferredToken *pDeferred; /* Deferred token object for this token */ + Fts3MultiSegReader *pSegcsr; /* Segment-reader for this token */ +}; - }else{ - zFile = sqlite3_malloc(nUri+2); - if( !zFile ) return SQLITE_NOMEM; - memcpy(zFile, zUri, nUri); - zFile[nUri] = '\0'; - zFile[nUri+1] = '\0'; - } +struct Fts3Phrase { + /* Cache of doclist for this phrase. */ + Fts3Doclist doclist; + int bIncr; /* True if doclist is loaded incrementally */ + int iDoclistToken; - *ppVfs = sqlite3_vfs_find(zVfs); - if( *ppVfs==0 ){ - *pzErrMsg = sqlite3_mprintf("no such vfs: %s", zVfs); - rc = SQLITE_ERROR; - } - parse_uri_out: - if( rc!=SQLITE_OK ){ - sqlite3_free(zFile); - zFile = 0; - } - *pFlags = flags; - *pzFile = zFile; - return rc; -} + /* Variables below this point are populated by fts3_expr.c when parsing + ** a MATCH expression. Everything above is part of the evaluation phase. + */ + int nToken; /* Number of tokens in the phrase */ + int iColumn; /* Index of column this phrase must match */ + Fts3PhraseToken aToken[1]; /* One entry for each token in the phrase */ +}; + +/* +** A tree of these objects forms the RHS of a MATCH operator. +** +** If Fts3Expr.eType is FTSQUERY_PHRASE and isLoaded is true, then aDoclist +** points to a malloced buffer, size nDoclist bytes, containing the results +** of this phrase query in FTS3 doclist format. As usual, the initial +** "Length" field found in doclists stored on disk is omitted from this +** buffer. +** +** Variable aMI is used only for FTSQUERY_NEAR nodes to store the global +** matchinfo data. If it is not NULL, it points to an array of size nCol*3, +** where nCol is the number of columns in the queried FTS table. The array +** is populated as follows: +** +** aMI[iCol*3 + 0] = Undefined +** aMI[iCol*3 + 1] = Number of occurrences +** aMI[iCol*3 + 2] = Number of rows containing at least one instance +** +** The aMI array is allocated using sqlite3_malloc(). It should be freed +** when the expression node is. +*/ +struct Fts3Expr { + int eType; /* One of the FTSQUERY_XXX values defined below */ + int nNear; /* Valid if eType==FTSQUERY_NEAR */ + Fts3Expr *pParent; /* pParent->pLeft==this or pParent->pRight==this */ + Fts3Expr *pLeft; /* Left operand */ + Fts3Expr *pRight; /* Right operand */ + Fts3Phrase *pPhrase; /* Valid if eType==FTSQUERY_PHRASE */ + /* The following are used by the fts3_eval.c module. */ + sqlite3_int64 iDocid; /* Current docid */ + u8 bEof; /* True this expression is at EOF already */ + u8 bStart; /* True if iDocid is valid */ + u8 bDeferred; /* True if this expression is entirely deferred */ + + u32 *aMI; +}; /* -** This routine does the work of opening a database on behalf of -** sqlite3_open() and sqlite3_open16(). The database filename "zFilename" -** is UTF-8 encoded. +** Candidate values for Fts3Query.eType. Note that the order of the first +** four values is in order of precedence when parsing expressions. For +** example, the following: +** +** "a OR b AND c NOT d NEAR e" +** +** is equivalent to: +** +** "a OR (b AND (c NOT (d NEAR e)))" */ -static int openDatabase( - const char *zFilename, /* Database filename UTF-8 encoded */ - sqlite3 **ppDb, /* OUT: Returned database handle */ - unsigned int flags, /* Operational flags */ - const char *zVfs /* Name of the VFS to use */ -){ - sqlite3 *db; /* Store allocated handle here */ - int rc; /* Return code */ - int isThreadsafe; /* True for threadsafe connections */ - char *zOpen = 0; /* Filename argument to pass to BtreeOpen() */ - char *zErrMsg = 0; /* Error message from sqlite3ParseUri() */ +#define FTSQUERY_NEAR 1 +#define FTSQUERY_NOT 2 +#define FTSQUERY_AND 3 +#define FTSQUERY_OR 4 +#define FTSQUERY_PHRASE 5 - *ppDb = 0; -#ifndef SQLITE_OMIT_AUTOINIT - rc = sqlite3_initialize(); - if( rc ) return rc; + +/* fts3_write.c */ +SQLITE_PRIVATE int sqlite3Fts3UpdateMethod(sqlite3_vtab*,int,sqlite3_value**,sqlite3_int64*); +SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *); +SQLITE_PRIVATE void sqlite3Fts3PendingTermsClear(Fts3Table *); +SQLITE_PRIVATE int sqlite3Fts3Optimize(Fts3Table *); +SQLITE_PRIVATE int sqlite3Fts3SegReaderNew(int, int, sqlite3_int64, + sqlite3_int64, sqlite3_int64, const char *, int, Fts3SegReader**); +SQLITE_PRIVATE int sqlite3Fts3SegReaderPending( + Fts3Table*,int,const char*,int,int,Fts3SegReader**); +SQLITE_PRIVATE void sqlite3Fts3SegReaderFree(Fts3SegReader *); +SQLITE_PRIVATE int sqlite3Fts3AllSegdirs(Fts3Table*, int, int, int, sqlite3_stmt **); +SQLITE_PRIVATE int sqlite3Fts3ReadBlock(Fts3Table*, sqlite3_int64, char **, int*, int*); + +SQLITE_PRIVATE int sqlite3Fts3SelectDoctotal(Fts3Table *, sqlite3_stmt **); +SQLITE_PRIVATE int sqlite3Fts3SelectDocsize(Fts3Table *, sqlite3_int64, sqlite3_stmt **); + +#ifndef SQLITE_DISABLE_FTS4_DEFERRED +SQLITE_PRIVATE void sqlite3Fts3FreeDeferredTokens(Fts3Cursor *); +SQLITE_PRIVATE int sqlite3Fts3DeferToken(Fts3Cursor *, Fts3PhraseToken *, int); +SQLITE_PRIVATE int sqlite3Fts3CacheDeferredDoclists(Fts3Cursor *); +SQLITE_PRIVATE void sqlite3Fts3FreeDeferredDoclists(Fts3Cursor *); +SQLITE_PRIVATE int sqlite3Fts3DeferredTokenList(Fts3DeferredToken *, char **, int *); +#else +# define sqlite3Fts3FreeDeferredTokens(x) +# define sqlite3Fts3DeferToken(x,y,z) SQLITE_OK +# define sqlite3Fts3CacheDeferredDoclists(x) SQLITE_OK +# define sqlite3Fts3FreeDeferredDoclists(x) +# define sqlite3Fts3DeferredTokenList(x,y,z) SQLITE_OK #endif - /* Only allow sensible combinations of bits in the flags argument. - ** Throw an error if any non-sense combination is used. If we - ** do not block illegal combinations here, it could trigger - ** assert() statements in deeper layers. Sensible combinations - ** are: - ** - ** 1: SQLITE_OPEN_READONLY - ** 2: SQLITE_OPEN_READWRITE - ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE - */ - assert( SQLITE_OPEN_READONLY == 0x01 ); - assert( SQLITE_OPEN_READWRITE == 0x02 ); - assert( SQLITE_OPEN_CREATE == 0x04 ); - testcase( (1<<(flags&7))==0x02 ); /* READONLY */ - testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ - testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ - if( ((1<<(flags&7)) & 0x46)==0 ) return SQLITE_MISUSE_BKPT; +SQLITE_PRIVATE void sqlite3Fts3SegmentsClose(Fts3Table *); +SQLITE_PRIVATE int sqlite3Fts3MaxLevel(Fts3Table *, int *); - if( sqlite3GlobalConfig.bCoreMutex==0 ){ - isThreadsafe = 0; - }else if( flags & SQLITE_OPEN_NOMUTEX ){ - isThreadsafe = 0; - }else if( flags & SQLITE_OPEN_FULLMUTEX ){ - isThreadsafe = 1; - }else{ - isThreadsafe = sqlite3GlobalConfig.bFullMutex; - } - if( flags & SQLITE_OPEN_PRIVATECACHE ){ - flags &= ~SQLITE_OPEN_SHAREDCACHE; - }else if( sqlite3GlobalConfig.sharedCacheEnabled ){ - flags |= SQLITE_OPEN_SHAREDCACHE; - } +/* Special values interpreted by sqlite3SegReaderCursor() */ +#define FTS3_SEGCURSOR_PENDING -1 +#define FTS3_SEGCURSOR_ALL -2 - /* Remove harmful bits from the flags parameter - ** - ** The SQLITE_OPEN_NOMUTEX and SQLITE_OPEN_FULLMUTEX flags were - ** dealt with in the previous code block. Besides these, the only - ** valid input flags for sqlite3_open_v2() are SQLITE_OPEN_READONLY, - ** SQLITE_OPEN_READWRITE, SQLITE_OPEN_CREATE, SQLITE_OPEN_SHAREDCACHE, - ** SQLITE_OPEN_PRIVATECACHE, and some reserved bits. Silently mask - ** off all other flags. - */ - flags &= ~( SQLITE_OPEN_DELETEONCLOSE | - SQLITE_OPEN_EXCLUSIVE | - SQLITE_OPEN_MAIN_DB | - SQLITE_OPEN_TEMP_DB | - SQLITE_OPEN_TRANSIENT_DB | - SQLITE_OPEN_MAIN_JOURNAL | - SQLITE_OPEN_TEMP_JOURNAL | - SQLITE_OPEN_SUBJOURNAL | - SQLITE_OPEN_MASTER_JOURNAL | - SQLITE_OPEN_NOMUTEX | - SQLITE_OPEN_FULLMUTEX | - SQLITE_OPEN_WAL - ); +SQLITE_PRIVATE int sqlite3Fts3SegReaderStart(Fts3Table*, Fts3MultiSegReader*, Fts3SegFilter*); +SQLITE_PRIVATE int sqlite3Fts3SegReaderStep(Fts3Table *, Fts3MultiSegReader *); +SQLITE_PRIVATE void sqlite3Fts3SegReaderFinish(Fts3MultiSegReader *); - /* Allocate the sqlite data structure */ - db = sqlite3MallocZero( sizeof(sqlite3) ); - if( db==0 ) goto opendb_out; - if( isThreadsafe ){ - db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); - if( db->mutex==0 ){ - sqlite3_free(db); - db = 0; - goto opendb_out; - } - } - sqlite3_mutex_enter(db->mutex); - db->errMask = 0xff; - db->nDb = 2; - db->magic = SQLITE_MAGIC_BUSY; - db->aDb = db->aDbStatic; +SQLITE_PRIVATE int sqlite3Fts3SegReaderCursor(Fts3Table *, + int, int, int, const char *, int, int, int, Fts3MultiSegReader *); - assert( sizeof(db->aLimit)==sizeof(aHardLimit) ); - memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit)); - db->autoCommit = 1; - db->nextAutovac = -1; - db->nextPagesize = 0; - db->flags |= SQLITE_ShortColNames | SQLITE_AutoIndex | SQLITE_EnableTrigger -#if SQLITE_DEFAULT_FILE_FORMAT<4 - | SQLITE_LegacyFileFmt -#endif -#ifdef SQLITE_ENABLE_LOAD_EXTENSION - | SQLITE_LoadExtension -#endif -#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS - | SQLITE_RecTriggers -#endif -#if defined(SQLITE_DEFAULT_FOREIGN_KEYS) && SQLITE_DEFAULT_FOREIGN_KEYS - | SQLITE_ForeignKeys -#endif - ; - sqlite3HashInit(&db->aCollSeq); -#ifndef SQLITE_OMIT_VIRTUALTABLE - sqlite3HashInit(&db->aModule); -#endif +/* Flags allowed as part of the 4th argument to SegmentReaderIterate() */ +#define FTS3_SEGMENT_REQUIRE_POS 0x00000001 +#define FTS3_SEGMENT_IGNORE_EMPTY 0x00000002 +#define FTS3_SEGMENT_COLUMN_FILTER 0x00000004 +#define FTS3_SEGMENT_PREFIX 0x00000008 +#define FTS3_SEGMENT_SCAN 0x00000010 +#define FTS3_SEGMENT_FIRST 0x00000020 - /* Add the default collation sequence BINARY. BINARY works for both UTF-8 - ** and UTF-16, so add a version for each to avoid any unnecessary - ** conversions. The only error that can occur here is a malloc() failure. - */ - createCollation(db, "BINARY", SQLITE_UTF8, SQLITE_COLL_BINARY, 0, - binCollFunc, 0); - createCollation(db, "BINARY", SQLITE_UTF16BE, SQLITE_COLL_BINARY, 0, - binCollFunc, 0); - createCollation(db, "BINARY", SQLITE_UTF16LE, SQLITE_COLL_BINARY, 0, - binCollFunc, 0); - createCollation(db, "RTRIM", SQLITE_UTF8, SQLITE_COLL_USER, (void*)1, - binCollFunc, 0); - if( db->mallocFailed ){ - goto opendb_out; - } - db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 0); - assert( db->pDfltColl!=0 ); +/* Type passed as 4th argument to SegmentReaderIterate() */ +struct Fts3SegFilter { + const char *zTerm; + int nTerm; + int iCol; + int flags; +}; - /* Also add a UTF-8 case-insensitive collation sequence. */ - createCollation(db, "NOCASE", SQLITE_UTF8, SQLITE_COLL_NOCASE, 0, - nocaseCollatingFunc, 0); +struct Fts3MultiSegReader { + /* Used internally by sqlite3Fts3SegReaderXXX() calls */ + Fts3SegReader **apSegment; /* Array of Fts3SegReader objects */ + int nSegment; /* Size of apSegment array */ + int nAdvance; /* How many seg-readers to advance */ + Fts3SegFilter *pFilter; /* Pointer to filter object */ + char *aBuffer; /* Buffer to merge doclists in */ + int nBuffer; /* Allocated size of aBuffer[] in bytes */ - /* Parse the filename/URI argument. */ - db->openFlags = flags; - rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; - sqlite3Error(db, rc, zErrMsg ? "%s" : 0, zErrMsg); - sqlite3_free(zErrMsg); - goto opendb_out; - } + int iColFilter; /* If >=0, filter for this column */ + int bRestart; - /* Open the backend database driver */ - rc = sqlite3BtreeOpen(db->pVfs, zOpen, db, &db->aDb[0].pBt, 0, - flags | SQLITE_OPEN_MAIN_DB); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_IOERR_NOMEM ){ - rc = SQLITE_NOMEM; - } - sqlite3Error(db, rc, 0); - goto opendb_out; - } - db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt); - db->aDb[1].pSchema = sqlite3SchemaGet(db, 0); + /* Used by fts3.c only. */ + int nCost; /* Cost of running iterator */ + int bLookup; /* True if a lookup of a single entry. */ + /* Output values. Valid only after Fts3SegReaderStep() returns SQLITE_ROW. */ + char *zTerm; /* Pointer to term buffer */ + int nTerm; /* Size of zTerm in bytes */ + char *aDoclist; /* Pointer to doclist buffer */ + int nDoclist; /* Size of aDoclist[] in bytes */ +}; - /* The default safety_level for the main database is 'full'; for the temp - ** database it is 'NONE'. This matches the pager layer defaults. - */ - db->aDb[0].zName = "main"; - db->aDb[0].safety_level = 3; - db->aDb[1].zName = "temp"; - db->aDb[1].safety_level = 1; +SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table*,int,int); - db->magic = SQLITE_MAGIC_OPEN; - if( db->mallocFailed ){ - goto opendb_out; - } +#define fts3GetVarint32(p, piVal) ( \ + (*(u8*)(p)&0x80) ? sqlite3Fts3GetVarint32(p, piVal) : (*piVal=*(u8*)(p), 1) \ +) - /* Register all built-in functions, but do not attempt to read the - ** database schema yet. This is delayed until the first time the database - ** is accessed. - */ - sqlite3Error(db, SQLITE_OK, 0); - sqlite3RegisterBuiltinFunctions(db); +/* fts3.c */ +SQLITE_PRIVATE int sqlite3Fts3PutVarint(char *, sqlite3_int64); +SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *, sqlite_int64 *); +SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *, int *); +SQLITE_PRIVATE int sqlite3Fts3VarintLen(sqlite3_uint64); +SQLITE_PRIVATE void sqlite3Fts3Dequote(char *); +SQLITE_PRIVATE void sqlite3Fts3DoclistPrev(int,char*,int,char**,sqlite3_int64*,int*,u8*); +SQLITE_PRIVATE int sqlite3Fts3EvalPhraseStats(Fts3Cursor *, Fts3Expr *, u32 *); +SQLITE_PRIVATE int sqlite3Fts3FirstFilter(sqlite3_int64, char *, int, char *); +SQLITE_PRIVATE void sqlite3Fts3CreateStatTable(int*, Fts3Table*); - /* Load automatic extensions - extensions that have been registered - ** using the sqlite3_automatic_extension() API. - */ - sqlite3AutoLoadExtensions(db); - rc = sqlite3_errcode(db); - if( rc!=SQLITE_OK ){ - goto opendb_out; - } +/* fts3_tokenizer.c */ +SQLITE_PRIVATE const char *sqlite3Fts3NextToken(const char *, int *); +SQLITE_PRIVATE int sqlite3Fts3InitHashTable(sqlite3 *, Fts3Hash *, const char *); +SQLITE_PRIVATE int sqlite3Fts3InitTokenizer(Fts3Hash *pHash, const char *, + sqlite3_tokenizer **, char ** +); +SQLITE_PRIVATE int sqlite3Fts3IsIdChar(char); -#ifdef SQLITE_ENABLE_FTS1 - if( !db->mallocFailed ){ - extern int sqlite3Fts1Init(sqlite3*); - rc = sqlite3Fts1Init(db); - } -#endif +/* fts3_snippet.c */ +SQLITE_PRIVATE void sqlite3Fts3Offsets(sqlite3_context*, Fts3Cursor*); +SQLITE_PRIVATE void sqlite3Fts3Snippet(sqlite3_context *, Fts3Cursor *, const char *, + const char *, const char *, int, int +); +SQLITE_PRIVATE void sqlite3Fts3Matchinfo(sqlite3_context *, Fts3Cursor *, const char *); -#ifdef SQLITE_ENABLE_FTS2 - if( !db->mallocFailed && rc==SQLITE_OK ){ - extern int sqlite3Fts2Init(sqlite3*); - rc = sqlite3Fts2Init(db); - } +/* fts3_expr.c */ +SQLITE_PRIVATE int sqlite3Fts3ExprParse(sqlite3_tokenizer *, int, + char **, int, int, int, const char *, int, Fts3Expr **, char ** +); +SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *); +#ifdef SQLITE_TEST +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db); +SQLITE_PRIVATE int sqlite3Fts3InitTerm(sqlite3 *db); #endif -#ifdef SQLITE_ENABLE_FTS3 - if( !db->mallocFailed && rc==SQLITE_OK ){ - rc = sqlite3Fts3Init(db); - } -#endif +SQLITE_PRIVATE int sqlite3Fts3OpenTokenizer(sqlite3_tokenizer *, int, const char *, int, + sqlite3_tokenizer_cursor ** +); -#ifdef SQLITE_ENABLE_ICU - if( !db->mallocFailed && rc==SQLITE_OK ){ - rc = sqlite3IcuInit(db); - } +/* fts3_aux.c */ +SQLITE_PRIVATE int sqlite3Fts3InitAux(sqlite3 *db); + +SQLITE_PRIVATE void sqlite3Fts3EvalPhraseCleanup(Fts3Phrase *); + +SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart( + Fts3Table*, Fts3MultiSegReader*, int, const char*, int); +SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext( + Fts3Table *, Fts3MultiSegReader *, sqlite3_int64 *, char **, int *); +SQLITE_PRIVATE int sqlite3Fts3EvalPhrasePoslist(Fts3Cursor *, Fts3Expr *, int iCol, char **); +SQLITE_PRIVATE int sqlite3Fts3MsrOvfl(Fts3Cursor *, Fts3MultiSegReader *, int *); +SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr); + +/* fts3_tokenize_vtab.c */ +SQLITE_PRIVATE int sqlite3Fts3InitTok(sqlite3*, Fts3Hash *); + +/* fts3_unicode2.c (functions generated by parsing unicode text files) */ +#ifndef SQLITE_DISABLE_FTS3_UNICODE +SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int, int); +SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int); +SQLITE_PRIVATE int sqlite3FtsUnicodeIsdiacritic(int); #endif -#ifdef SQLITE_ENABLE_RTREE - if( !db->mallocFailed && rc==SQLITE_OK){ - rc = sqlite3RtreeInit(db); - } +#endif /* !SQLITE_CORE || SQLITE_ENABLE_FTS3 */ +#endif /* _FTSINT_H */ + +/************** End of fts3Int.h *********************************************/ +/************** Continuing where we left off in fts3.c ***********************/ +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + +#if defined(SQLITE_ENABLE_FTS3) && !defined(SQLITE_CORE) +# define SQLITE_CORE 1 #endif - sqlite3Error(db, rc, 0); +/* #include */ +/* #include */ +/* #include */ +/* #include */ +/* #include */ +/* #include */ - /* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking - ** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking - ** mode. Doing nothing at all also makes NORMAL the default. - */ -#ifdef SQLITE_DEFAULT_LOCKING_MODE - db->dfltLockMode = SQLITE_DEFAULT_LOCKING_MODE; - sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt), - SQLITE_DEFAULT_LOCKING_MODE); +#ifndef SQLITE_CORE + SQLITE_EXTENSION_INIT1 #endif - /* Enable the lookaside-malloc subsystem */ - setupLookaside(db, 0, sqlite3GlobalConfig.szLookaside, - sqlite3GlobalConfig.nLookaside); +static int fts3EvalNext(Fts3Cursor *pCsr); +static int fts3EvalStart(Fts3Cursor *pCsr); +static int fts3TermSegReaderCursor( + Fts3Cursor *, const char *, int, int, Fts3MultiSegReader **); - sqlite3_wal_autocheckpoint(db, SQLITE_DEFAULT_WAL_AUTOCHECKPOINT); +/* +** Write a 64-bit variable-length integer to memory starting at p[0]. +** The length of data written will be between 1 and FTS3_VARINT_MAX bytes. +** The number of bytes written is returned. +*/ +SQLITE_PRIVATE int sqlite3Fts3PutVarint(char *p, sqlite_int64 v){ + unsigned char *q = (unsigned char *) p; + sqlite_uint64 vu = v; + do{ + *q++ = (unsigned char) ((vu & 0x7f) | 0x80); + vu >>= 7; + }while( vu!=0 ); + q[-1] &= 0x7f; /* turn off high bit in final byte */ + assert( q - (unsigned char *)p <= FTS3_VARINT_MAX ); + return (int) (q - (unsigned char *)p); +} -opendb_out: - sqlite3_free(zOpen); - if( db ){ - assert( db->mutex!=0 || isThreadsafe==0 || sqlite3GlobalConfig.bFullMutex==0 ); - sqlite3_mutex_leave(db->mutex); - } - rc = sqlite3_errcode(db); - if( rc==SQLITE_NOMEM ){ - sqlite3_close(db); - db = 0; - }else if( rc!=SQLITE_OK ){ - db->magic = SQLITE_MAGIC_SICK; +#define GETVARINT_STEP(v, ptr, shift, mask1, mask2, var, ret) \ + v = (v & mask1) | ( (*ptr++) << shift ); \ + if( (v & mask2)==0 ){ var = v; return ret; } +#define GETVARINT_INIT(v, ptr, shift, mask1, mask2, var, ret) \ + v = (*ptr++); \ + if( (v & mask2)==0 ){ var = v; return ret; } + +/* +** Read a 64-bit variable-length integer from memory starting at p[0]. +** Return the number of bytes read, or 0 on error. +** The value is stored in *v. +*/ +SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){ + const char *pStart = p; + u32 a; + u64 b; + int shift; + + GETVARINT_INIT(a, p, 0, 0x00, 0x80, *v, 1); + GETVARINT_STEP(a, p, 7, 0x7F, 0x4000, *v, 2); + GETVARINT_STEP(a, p, 14, 0x3FFF, 0x200000, *v, 3); + GETVARINT_STEP(a, p, 21, 0x1FFFFF, 0x10000000, *v, 4); + b = (a & 0x0FFFFFFF ); + + for(shift=28; shift<=63; shift+=7){ + u64 c = *p++; + b += (c&0x7F) << shift; + if( (c & 0x80)==0 ) break; } - *ppDb = db; - return sqlite3ApiExit(0, rc); + *v = b; + return (int)(p - pStart); +} + +/* +** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to a +** 32-bit integer before it is returned. +*/ +SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *p, int *pi){ + u32 a; + +#ifndef fts3GetVarint32 + GETVARINT_INIT(a, p, 0, 0x00, 0x80, *pi, 1); +#else + a = (*p++); + assert( a & 0x80 ); +#endif + + GETVARINT_STEP(a, p, 7, 0x7F, 0x4000, *pi, 2); + GETVARINT_STEP(a, p, 14, 0x3FFF, 0x200000, *pi, 3); + GETVARINT_STEP(a, p, 21, 0x1FFFFF, 0x10000000, *pi, 4); + a = (a & 0x0FFFFFFF ); + *pi = (int)(a | ((u32)(*p & 0x0F) << 28)); + return 5; } /* -** Open a new database handle. +** Return the number of bytes required to encode v as a varint */ -SQLITE_API int sqlite3_open( - const char *zFilename, - sqlite3 **ppDb -){ - return openDatabase(zFilename, ppDb, - SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); -} -SQLITE_API int sqlite3_open_v2( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb, /* OUT: SQLite db handle */ - int flags, /* Flags */ - const char *zVfs /* Name of VFS module to use */ -){ - return openDatabase(filename, ppDb, (unsigned int)flags, zVfs); +SQLITE_PRIVATE int sqlite3Fts3VarintLen(sqlite3_uint64 v){ + int i = 0; + do{ + i++; + v >>= 7; + }while( v!=0 ); + return i; } -#ifndef SQLITE_OMIT_UTF16 /* -** Open a new database handle. +** Convert an SQL-style quoted string into a normal string by removing +** the quote characters. The conversion is done in-place. If the +** input does not begin with a quote character, then this routine +** is a no-op. +** +** Examples: +** +** "abc" becomes abc +** 'xyz' becomes xyz +** [pqr] becomes pqr +** `mno` becomes mno +** */ -SQLITE_API int sqlite3_open16( - const void *zFilename, - sqlite3 **ppDb -){ - char const *zFilename8; /* zFilename encoded in UTF-8 instead of UTF-16 */ - sqlite3_value *pVal; - int rc; +SQLITE_PRIVATE void sqlite3Fts3Dequote(char *z){ + char quote; /* Quote character (if any ) */ - assert( zFilename ); - assert( ppDb ); - *ppDb = 0; -#ifndef SQLITE_OMIT_AUTOINIT - rc = sqlite3_initialize(); - if( rc ) return rc; -#endif - pVal = sqlite3ValueNew(0); - sqlite3ValueSetStr(pVal, -1, zFilename, SQLITE_UTF16NATIVE, SQLITE_STATIC); - zFilename8 = sqlite3ValueText(pVal, SQLITE_UTF8); - if( zFilename8 ){ - rc = openDatabase(zFilename8, ppDb, - SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); - assert( *ppDb || rc==SQLITE_NOMEM ); - if( rc==SQLITE_OK && !DbHasProperty(*ppDb, 0, DB_SchemaLoaded) ){ - ENC(*ppDb) = SQLITE_UTF16NATIVE; + quote = z[0]; + if( quote=='[' || quote=='\'' || quote=='"' || quote=='`' ){ + int iIn = 1; /* Index of next byte to read from input */ + int iOut = 0; /* Index of next byte to write to output */ + + /* If the first byte was a '[', then the close-quote character is a ']' */ + if( quote=='[' ) quote = ']'; + + while( ALWAYS(z[iIn]) ){ + if( z[iIn]==quote ){ + if( z[iIn+1]!=quote ) break; + z[iOut++] = quote; + iIn += 2; + }else{ + z[iOut++] = z[iIn++]; + } } - }else{ - rc = SQLITE_NOMEM; + z[iOut] = '\0'; } - sqlite3ValueFree(pVal); - - return sqlite3ApiExit(0, rc); } -#endif /* SQLITE_OMIT_UTF16 */ /* -** Register a new collation sequence with the database handle db. +** Read a single varint from the doclist at *pp and advance *pp to point +** to the first byte past the end of the varint. Add the value of the varint +** to *pVal. */ -SQLITE_API int sqlite3_create_collation( - sqlite3* db, - const char *zName, - int enc, - void* pCtx, - int(*xCompare)(void*,int,const void*,int,const void*) -){ - int rc; - sqlite3_mutex_enter(db->mutex); - assert( !db->mallocFailed ); - rc = createCollation(db, zName, (u8)enc, SQLITE_COLL_USER, pCtx, xCompare, 0); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; +static void fts3GetDeltaVarint(char **pp, sqlite3_int64 *pVal){ + sqlite3_int64 iVal; + *pp += sqlite3Fts3GetVarint(*pp, &iVal); + *pVal += iVal; } /* -** Register a new collation sequence with the database handle db. +** When this function is called, *pp points to the first byte following a +** varint that is part of a doclist (or position-list, or any other list +** of varints). This function moves *pp to point to the start of that varint, +** and sets *pVal by the varint value. +** +** Argument pStart points to the first byte of the doclist that the +** varint is part of. */ -SQLITE_API int sqlite3_create_collation_v2( - sqlite3* db, - const char *zName, - int enc, - void* pCtx, - int(*xCompare)(void*,int,const void*,int,const void*), - void(*xDel)(void*) +static void fts3GetReverseVarint( + char **pp, + char *pStart, + sqlite3_int64 *pVal ){ - int rc; - sqlite3_mutex_enter(db->mutex); - assert( !db->mallocFailed ); - rc = createCollation(db, zName, (u8)enc, SQLITE_COLL_USER, pCtx, xCompare, xDel); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + sqlite3_int64 iVal; + char *p; + + /* Pointer p now points at the first byte past the varint we are + ** interested in. So, unless the doclist is corrupt, the 0x80 bit is + ** clear on character p[-1]. */ + for(p = (*pp)-2; p>=pStart && *p&0x80; p--); + p++; + *pp = p; + + sqlite3Fts3GetVarint(p, &iVal); + *pVal = iVal; } -#ifndef SQLITE_OMIT_UTF16 /* -** Register a new collation sequence with the database handle db. +** The xDisconnect() virtual table method. */ -SQLITE_API int sqlite3_create_collation16( - sqlite3* db, - const void *zName, - int enc, - void* pCtx, - int(*xCompare)(void*,int,const void*,int,const void*) -){ - int rc = SQLITE_OK; - char *zName8; - sqlite3_mutex_enter(db->mutex); - assert( !db->mallocFailed ); - zName8 = sqlite3Utf16to8(db, zName, -1, SQLITE_UTF16NATIVE); - if( zName8 ){ - rc = createCollation(db, zName8, (u8)enc, SQLITE_COLL_USER, pCtx, xCompare, 0); - sqlite3DbFree(db, zName8); +static int fts3DisconnectMethod(sqlite3_vtab *pVtab){ + Fts3Table *p = (Fts3Table *)pVtab; + int i; + + assert( p->nPendingData==0 ); + assert( p->pSegments==0 ); + + /* Free any prepared statements held */ + for(i=0; iaStmt); i++){ + sqlite3_finalize(p->aStmt[i]); } - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + sqlite3_free(p->zSegmentsTbl); + sqlite3_free(p->zReadExprlist); + sqlite3_free(p->zWriteExprlist); + sqlite3_free(p->zContentTbl); + sqlite3_free(p->zLanguageid); + + /* Invoke the tokenizer destructor to free the tokenizer. */ + p->pTokenizer->pModule->xDestroy(p->pTokenizer); + + sqlite3_free(p); + return SQLITE_OK; } -#endif /* SQLITE_OMIT_UTF16 */ /* -** Register a collation sequence factory callback with the database handle -** db. Replace any previously installed collation sequence factory. +** Construct one or more SQL statements from the format string given +** and then evaluate those statements. The success code is written +** into *pRc. +** +** If *pRc is initially non-zero then this routine is a no-op. */ -SQLITE_API int sqlite3_collation_needed( - sqlite3 *db, - void *pCollNeededArg, - void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*) +static void fts3DbExec( + int *pRc, /* Success code */ + sqlite3 *db, /* Database in which to run SQL */ + const char *zFormat, /* Format string for SQL */ + ... /* Arguments to the format string */ ){ - sqlite3_mutex_enter(db->mutex); - db->xCollNeeded = xCollNeeded; - db->xCollNeeded16 = 0; - db->pCollNeededArg = pCollNeededArg; - sqlite3_mutex_leave(db->mutex); - return SQLITE_OK; + va_list ap; + char *zSql; + if( *pRc ) return; + va_start(ap, zFormat); + zSql = sqlite3_vmprintf(zFormat, ap); + va_end(ap); + if( zSql==0 ){ + *pRc = SQLITE_NOMEM; + }else{ + *pRc = sqlite3_exec(db, zSql, 0, 0, 0); + sqlite3_free(zSql); + } } -#ifndef SQLITE_OMIT_UTF16 /* -** Register a collation sequence factory callback with the database handle -** db. Replace any previously installed collation sequence factory. +** The xDestroy() virtual table method. */ -SQLITE_API int sqlite3_collation_needed16( - sqlite3 *db, - void *pCollNeededArg, - void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*) -){ - sqlite3_mutex_enter(db->mutex); - db->xCollNeeded = 0; - db->xCollNeeded16 = xCollNeeded16; - db->pCollNeededArg = pCollNeededArg; - sqlite3_mutex_leave(db->mutex); - return SQLITE_OK; +static int fts3DestroyMethod(sqlite3_vtab *pVtab){ + Fts3Table *p = (Fts3Table *)pVtab; + int rc = SQLITE_OK; /* Return code */ + const char *zDb = p->zDb; /* Name of database (e.g. "main", "temp") */ + sqlite3 *db = p->db; /* Database handle */ + + /* Drop the shadow tables */ + if( p->zContentTbl==0 ){ + fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_content'", zDb, p->zName); + } + fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_segments'", zDb,p->zName); + fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_segdir'", zDb, p->zName); + fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_docsize'", zDb, p->zName); + fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_stat'", zDb, p->zName); + + /* If everything has worked, invoke fts3DisconnectMethod() to free the + ** memory associated with the Fts3Table structure and return SQLITE_OK. + ** Otherwise, return an SQLite error code. + */ + return (rc==SQLITE_OK ? fts3DisconnectMethod(pVtab) : rc); } -#endif /* SQLITE_OMIT_UTF16 */ -#ifndef SQLITE_OMIT_DEPRECATED + /* -** This function is now an anachronism. It used to be used to recover from a -** malloc() failure, but SQLite now does this automatically. +** Invoke sqlite3_declare_vtab() to declare the schema for the FTS3 table +** passed as the first argument. This is done as part of the xConnect() +** and xCreate() methods. +** +** If *pRc is non-zero when this function is called, it is a no-op. +** Otherwise, if an error occurs, an SQLite error code is stored in *pRc +** before returning. */ -SQLITE_API int sqlite3_global_recover(void){ - return SQLITE_OK; +static void fts3DeclareVtab(int *pRc, Fts3Table *p){ + if( *pRc==SQLITE_OK ){ + int i; /* Iterator variable */ + int rc; /* Return code */ + char *zSql; /* SQL statement passed to declare_vtab() */ + char *zCols; /* List of user defined columns */ + const char *zLanguageid; + + zLanguageid = (p->zLanguageid ? p->zLanguageid : "__langid"); + sqlite3_vtab_config(p->db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1); + + /* Create a list of user columns for the virtual table */ + zCols = sqlite3_mprintf("%Q, ", p->azColumn[0]); + for(i=1; zCols && inColumn; i++){ + zCols = sqlite3_mprintf("%z%Q, ", zCols, p->azColumn[i]); + } + + /* Create the whole "CREATE TABLE" statement to pass to SQLite */ + zSql = sqlite3_mprintf( + "CREATE TABLE x(%s %Q HIDDEN, docid HIDDEN, %Q HIDDEN)", + zCols, p->zName, zLanguageid + ); + if( !zCols || !zSql ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_declare_vtab(p->db, zSql); + } + + sqlite3_free(zSql); + sqlite3_free(zCols); + *pRc = rc; + } } -#endif /* -** Test to see whether or not the database connection is in autocommit -** mode. Return TRUE if it is and FALSE if not. Autocommit mode is on -** by default. Autocommit is disabled by a BEGIN statement and reenabled -** by the next COMMIT or ROLLBACK. -** -******* THIS IS AN EXPERIMENTAL API AND IS SUBJECT TO CHANGE ****** +** Create the %_stat table if it does not already exist. */ -SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){ - return db->autoCommit; +SQLITE_PRIVATE void sqlite3Fts3CreateStatTable(int *pRc, Fts3Table *p){ + fts3DbExec(pRc, p->db, + "CREATE TABLE IF NOT EXISTS %Q.'%q_stat'" + "(id INTEGER PRIMARY KEY, value BLOB);", + p->zDb, p->zName + ); + if( (*pRc)==SQLITE_OK ) p->bHasStat = 1; } /* -** The following routines are subtitutes for constants SQLITE_CORRUPT, -** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_IOERR and possibly other error -** constants. They server two purposes: -** -** 1. Serve as a convenient place to set a breakpoint in a debugger -** to detect when version error conditions occurs. +** Create the backing store tables (%_content, %_segments and %_segdir) +** required by the FTS3 table passed as the only argument. This is done +** as part of the vtab xCreate() method. ** -** 2. Invoke sqlite3_log() to provide the source code location where -** a low-level error is first detected. +** If the p->bHasDocsize boolean is true (indicating that this is an +** FTS4 table, not an FTS3 table) then also create the %_docsize and +** %_stat tables required by FTS4. */ -SQLITE_PRIVATE int sqlite3CorruptError(int lineno){ - testcase( sqlite3GlobalConfig.xLog!=0 ); - sqlite3_log(SQLITE_CORRUPT, - "database corruption at line %d of [%.10s]", - lineno, 20+sqlite3_sourceid()); - return SQLITE_CORRUPT; -} -SQLITE_PRIVATE int sqlite3MisuseError(int lineno){ - testcase( sqlite3GlobalConfig.xLog!=0 ); - sqlite3_log(SQLITE_MISUSE, - "misuse at line %d of [%.10s]", - lineno, 20+sqlite3_sourceid()); - return SQLITE_MISUSE; -} -SQLITE_PRIVATE int sqlite3CantopenError(int lineno){ - testcase( sqlite3GlobalConfig.xLog!=0 ); - sqlite3_log(SQLITE_CANTOPEN, - "cannot open file at line %d of [%.10s]", - lineno, 20+sqlite3_sourceid()); - return SQLITE_CANTOPEN; -} +static int fts3CreateTables(Fts3Table *p){ + int rc = SQLITE_OK; /* Return code */ + int i; /* Iterator variable */ + sqlite3 *db = p->db; /* The database connection */ + if( p->zContentTbl==0 ){ + const char *zLanguageid = p->zLanguageid; + char *zContentCols; /* Columns of %_content table */ + + /* Create a list of user columns for the content table */ + zContentCols = sqlite3_mprintf("docid INTEGER PRIMARY KEY"); + for(i=0; zContentCols && inColumn; i++){ + char *z = p->azColumn[i]; + zContentCols = sqlite3_mprintf("%z, 'c%d%q'", zContentCols, i, z); + } + if( zLanguageid && zContentCols ){ + zContentCols = sqlite3_mprintf("%z, langid", zContentCols, zLanguageid); + } + if( zContentCols==0 ) rc = SQLITE_NOMEM; + + /* Create the content table */ + fts3DbExec(&rc, db, + "CREATE TABLE %Q.'%q_content'(%s)", + p->zDb, p->zName, zContentCols + ); + sqlite3_free(zContentCols); + } + + /* Create other tables */ + fts3DbExec(&rc, db, + "CREATE TABLE %Q.'%q_segments'(blockid INTEGER PRIMARY KEY, block BLOB);", + p->zDb, p->zName + ); + fts3DbExec(&rc, db, + "CREATE TABLE %Q.'%q_segdir'(" + "level INTEGER," + "idx INTEGER," + "start_block INTEGER," + "leaves_end_block INTEGER," + "end_block INTEGER," + "root BLOB," + "PRIMARY KEY(level, idx)" + ");", + p->zDb, p->zName + ); + if( p->bHasDocsize ){ + fts3DbExec(&rc, db, + "CREATE TABLE %Q.'%q_docsize'(docid INTEGER PRIMARY KEY, size BLOB);", + p->zDb, p->zName + ); + } + assert( p->bHasStat==p->bFts4 ); + if( p->bHasStat ){ + sqlite3Fts3CreateStatTable(&rc, p); + } + return rc; +} -#ifndef SQLITE_OMIT_DEPRECATED /* -** This is a convenience routine that makes sure that all thread-specific -** data for this thread has been deallocated. +** Store the current database page-size in bytes in p->nPgsz. ** -** SQLite no longer uses thread-specific data so this routine is now a -** no-op. It is retained for historical compatibility. +** If *pRc is non-zero when this function is called, it is a no-op. +** Otherwise, if an error occurs, an SQLite error code is stored in *pRc +** before returning. */ -SQLITE_API void sqlite3_thread_cleanup(void){ +static void fts3DatabasePageSize(int *pRc, Fts3Table *p){ + if( *pRc==SQLITE_OK ){ + int rc; /* Return code */ + char *zSql; /* SQL text "PRAGMA %Q.page_size" */ + sqlite3_stmt *pStmt; /* Compiled "PRAGMA %Q.page_size" statement */ + + zSql = sqlite3_mprintf("PRAGMA %Q.page_size", p->zDb); + if( !zSql ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_step(pStmt); + p->nPgsz = sqlite3_column_int(pStmt, 0); + rc = sqlite3_finalize(pStmt); + }else if( rc==SQLITE_AUTH ){ + p->nPgsz = 1024; + rc = SQLITE_OK; + } + } + assert( p->nPgsz>0 || rc!=SQLITE_OK ); + sqlite3_free(zSql); + *pRc = rc; + } } -#endif /* -** Return meta information about a specific column of a database table. -** See comment in sqlite3.h (sqlite.h.in) for details. +** "Special" FTS4 arguments are column specifications of the following form: +** +** = +** +** There may not be whitespace surrounding the "=" character. The +** term may be quoted, but the may not. */ -#ifdef SQLITE_ENABLE_COLUMN_METADATA -SQLITE_API int sqlite3_table_column_metadata( - sqlite3 *db, /* Connection handle */ - const char *zDbName, /* Database name or NULL */ - const char *zTableName, /* Table name */ - const char *zColumnName, /* Column name */ - char const **pzDataType, /* OUTPUT: Declared data type */ - char const **pzCollSeq, /* OUTPUT: Collation sequence name */ - int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ - int *pPrimaryKey, /* OUTPUT: True if column part of PK */ - int *pAutoinc /* OUTPUT: True if column is auto-increment */ +static int fts3IsSpecialColumn( + const char *z, + int *pnKey, + char **pzValue ){ - int rc; - char *zErrMsg = 0; - Table *pTab = 0; - Column *pCol = 0; - int iCol; + char *zValue; + const char *zCsr = z; - char const *zDataType = 0; - char const *zCollSeq = 0; - int notnull = 0; - int primarykey = 0; - int autoinc = 0; + while( *zCsr!='=' ){ + if( *zCsr=='\0' ) return 0; + zCsr++; + } - /* Ensure the database schema has been loaded */ - sqlite3_mutex_enter(db->mutex); - sqlite3BtreeEnterAll(db); - rc = sqlite3Init(db, &zErrMsg); - if( SQLITE_OK!=rc ){ - goto error_out; + *pnKey = (int)(zCsr-z); + zValue = sqlite3_mprintf("%s", &zCsr[1]); + if( zValue ){ + sqlite3Fts3Dequote(zValue); } + *pzValue = zValue; + return 1; +} - /* Locate the table in question */ - pTab = sqlite3FindTable(db, zTableName, zDbName); - if( !pTab || pTab->pSelect ){ - pTab = 0; - goto error_out; +/* +** Append the output of a printf() style formatting to an existing string. +*/ +static void fts3Appendf( + int *pRc, /* IN/OUT: Error code */ + char **pz, /* IN/OUT: Pointer to string buffer */ + const char *zFormat, /* Printf format string to append */ + ... /* Arguments for printf format string */ +){ + if( *pRc==SQLITE_OK ){ + va_list ap; + char *z; + va_start(ap, zFormat); + z = sqlite3_vmprintf(zFormat, ap); + va_end(ap); + if( z && *pz ){ + char *z2 = sqlite3_mprintf("%s%s", *pz, z); + sqlite3_free(z); + z = z2; + } + if( z==0 ) *pRc = SQLITE_NOMEM; + sqlite3_free(*pz); + *pz = z; + } +} + +/* +** Return a copy of input string zInput enclosed in double-quotes (") and +** with all double quote characters escaped. For example: +** +** fts3QuoteId("un \"zip\"") -> "un \"\"zip\"\"" +** +** The pointer returned points to memory obtained from sqlite3_malloc(). It +** is the callers responsibility to call sqlite3_free() to release this +** memory. +*/ +static char *fts3QuoteId(char const *zInput){ + int nRet; + char *zRet; + nRet = 2 + (int)strlen(zInput)*2 + 1; + zRet = sqlite3_malloc(nRet); + if( zRet ){ + int i; + char *z = zRet; + *(z++) = '"'; + for(i=0; zInput[i]; i++){ + if( zInput[i]=='"' ) *(z++) = '"'; + *(z++) = zInput[i]; + } + *(z++) = '"'; + *(z++) = '\0'; } + return zRet; +} - /* Find the column for which info is requested */ - if( sqlite3IsRowid(zColumnName) ){ - iCol = pTab->iPKey; - if( iCol>=0 ){ - pCol = &pTab->aCol[iCol]; +/* +** Return a list of comma separated SQL expressions and a FROM clause that +** could be used in a SELECT statement such as the following: +** +** SELECT FROM %_content AS x ... +** +** to return the docid, followed by each column of text data in order +** from left to write. If parameter zFunc is not NULL, then instead of +** being returned directly each column of text data is passed to an SQL +** function named zFunc first. For example, if zFunc is "unzip" and the +** table has the three user-defined columns "a", "b", and "c", the following +** string is returned: +** +** "docid, unzip(x.'a'), unzip(x.'b'), unzip(x.'c') FROM %_content AS x" +** +** The pointer returned points to a buffer allocated by sqlite3_malloc(). It +** is the responsibility of the caller to eventually free it. +** +** If *pRc is not SQLITE_OK when this function is called, it is a no-op (and +** a NULL pointer is returned). Otherwise, if an OOM error is encountered +** by this function, NULL is returned and *pRc is set to SQLITE_NOMEM. If +** no error occurs, *pRc is left unmodified. +*/ +static char *fts3ReadExprList(Fts3Table *p, const char *zFunc, int *pRc){ + char *zRet = 0; + char *zFree = 0; + char *zFunction; + int i; + + if( p->zContentTbl==0 ){ + if( !zFunc ){ + zFunction = ""; + }else{ + zFree = zFunction = fts3QuoteId(zFunc); } + fts3Appendf(pRc, &zRet, "docid"); + for(i=0; inColumn; i++){ + fts3Appendf(pRc, &zRet, ",%s(x.'c%d%q')", zFunction, i, p->azColumn[i]); + } + if( p->zLanguageid ){ + fts3Appendf(pRc, &zRet, ", x.%Q", "langid"); + } + sqlite3_free(zFree); }else{ - for(iCol=0; iColnCol; iCol++){ - pCol = &pTab->aCol[iCol]; - if( 0==sqlite3StrICmp(pCol->zName, zColumnName) ){ - break; - } + fts3Appendf(pRc, &zRet, "rowid"); + for(i=0; inColumn; i++){ + fts3Appendf(pRc, &zRet, ", x.'%q'", p->azColumn[i]); } - if( iCol==pTab->nCol ){ - pTab = 0; - goto error_out; + if( p->zLanguageid ){ + fts3Appendf(pRc, &zRet, ", x.%Q", p->zLanguageid); } } + fts3Appendf(pRc, &zRet, " FROM '%q'.'%q%s' AS x", + p->zDb, + (p->zContentTbl ? p->zContentTbl : p->zName), + (p->zContentTbl ? "" : "_content") + ); + return zRet; +} - /* The following block stores the meta information that will be returned - ** to the caller in local variables zDataType, zCollSeq, notnull, primarykey - ** and autoinc. At this point there are two possibilities: - ** - ** 1. The specified column name was rowid", "oid" or "_rowid_" - ** and there is no explicitly declared IPK column. - ** - ** 2. The table is not a view and the column name identified an - ** explicitly declared column. Copy meta information from *pCol. - */ - if( pCol ){ - zDataType = pCol->zType; - zCollSeq = pCol->zColl; - notnull = pCol->notNull!=0; - primarykey = pCol->isPrimKey!=0; - autoinc = pTab->iPKey==iCol && (pTab->tabFlags & TF_Autoincrement)!=0; +/* +** Return a list of N comma separated question marks, where N is the number +** of columns in the %_content table (one for the docid plus one for each +** user-defined text column). +** +** If argument zFunc is not NULL, then all but the first question mark +** is preceded by zFunc and an open bracket, and followed by a closed +** bracket. For example, if zFunc is "zip" and the FTS3 table has three +** user-defined text columns, the following string is returned: +** +** "?, zip(?), zip(?), zip(?)" +** +** The pointer returned points to a buffer allocated by sqlite3_malloc(). It +** is the responsibility of the caller to eventually free it. +** +** If *pRc is not SQLITE_OK when this function is called, it is a no-op (and +** a NULL pointer is returned). Otherwise, if an OOM error is encountered +** by this function, NULL is returned and *pRc is set to SQLITE_NOMEM. If +** no error occurs, *pRc is left unmodified. +*/ +static char *fts3WriteExprList(Fts3Table *p, const char *zFunc, int *pRc){ + char *zRet = 0; + char *zFree = 0; + char *zFunction; + int i; + + if( !zFunc ){ + zFunction = ""; }else{ - zDataType = "INTEGER"; - primarykey = 1; + zFree = zFunction = fts3QuoteId(zFunc); } - if( !zCollSeq ){ - zCollSeq = "BINARY"; + fts3Appendf(pRc, &zRet, "?"); + for(i=0; inColumn; i++){ + fts3Appendf(pRc, &zRet, ",%s(?)", zFunction); } - -error_out: - sqlite3BtreeLeaveAll(db); - - /* Whether the function call succeeded or failed, set the output parameters - ** to whatever their local counterparts contain. If an error did occur, - ** this has the effect of zeroing all output parameters. - */ - if( pzDataType ) *pzDataType = zDataType; - if( pzCollSeq ) *pzCollSeq = zCollSeq; - if( pNotNull ) *pNotNull = notnull; - if( pPrimaryKey ) *pPrimaryKey = primarykey; - if( pAutoinc ) *pAutoinc = autoinc; - - if( SQLITE_OK==rc && !pTab ){ - sqlite3DbFree(db, zErrMsg); - zErrMsg = sqlite3MPrintf(db, "no such table column: %s.%s", zTableName, - zColumnName); - rc = SQLITE_ERROR; + if( p->zLanguageid ){ + fts3Appendf(pRc, &zRet, ", ?"); } - sqlite3Error(db, rc, (zErrMsg?"%s":0), zErrMsg); - sqlite3DbFree(db, zErrMsg); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + sqlite3_free(zFree); + return zRet; } -#endif /* -** Sleep for a little while. Return the amount of time slept. +** This function interprets the string at (*pp) as a non-negative integer +** value. It reads the integer and sets *pnOut to the value read, then +** sets *pp to point to the byte immediately following the last byte of +** the integer value. +** +** Only decimal digits ('0'..'9') may be part of an integer value. +** +** If *pp does not being with a decimal digit SQLITE_ERROR is returned and +** the output value undefined. Otherwise SQLITE_OK is returned. +** +** This function is used when parsing the "prefix=" FTS4 parameter. */ -SQLITE_API int sqlite3_sleep(int ms){ - sqlite3_vfs *pVfs; - int rc; - pVfs = sqlite3_vfs_find(0); - if( pVfs==0 ) return 0; +static int fts3GobbleInt(const char **pp, int *pnOut){ + const char *p; /* Iterator pointer */ + int nInt = 0; /* Output value */ - /* This function works in milliseconds, but the underlying OsSleep() - ** API uses microseconds. Hence the 1000's. - */ - rc = (sqlite3OsSleep(pVfs, 1000*ms)/1000); - return rc; + for(p=*pp; p[0]>='0' && p[0]<='9'; p++){ + nInt = nInt * 10 + (p[0] - '0'); + } + if( p==*pp ) return SQLITE_ERROR; + *pnOut = nInt; + *pp = p; + return SQLITE_OK; } /* -** Enable or disable the extended result codes. +** This function is called to allocate an array of Fts3Index structures +** representing the indexes maintained by the current FTS table. FTS tables +** always maintain the main "terms" index, but may also maintain one or +** more "prefix" indexes, depending on the value of the "prefix=" parameter +** (if any) specified as part of the CREATE VIRTUAL TABLE statement. +** +** Argument zParam is passed the value of the "prefix=" option if one was +** specified, or NULL otherwise. +** +** If no error occurs, SQLITE_OK is returned and *apIndex set to point to +** the allocated array. *pnIndex is set to the number of elements in the +** array. If an error does occur, an SQLite error code is returned. +** +** Regardless of whether or not an error is returned, it is the responsibility +** of the caller to call sqlite3_free() on the output array to free it. */ -SQLITE_API int sqlite3_extended_result_codes(sqlite3 *db, int onoff){ - sqlite3_mutex_enter(db->mutex); - db->errMask = onoff ? 0xffffffff : 0xff; - sqlite3_mutex_leave(db->mutex); +static int fts3PrefixParameter( + const char *zParam, /* ABC in prefix=ABC parameter to parse */ + int *pnIndex, /* OUT: size of *apIndex[] array */ + struct Fts3Index **apIndex /* OUT: Array of indexes for this table */ +){ + struct Fts3Index *aIndex; /* Allocated array */ + int nIndex = 1; /* Number of entries in array */ + + if( zParam && zParam[0] ){ + const char *p; + nIndex++; + for(p=zParam; *p; p++){ + if( *p==',' ) nIndex++; + } + } + + aIndex = sqlite3_malloc(sizeof(struct Fts3Index) * nIndex); + *apIndex = aIndex; + *pnIndex = nIndex; + if( !aIndex ){ + return SQLITE_NOMEM; + } + + memset(aIndex, 0, sizeof(struct Fts3Index) * nIndex); + if( zParam ){ + const char *p = zParam; + int i; + for(i=1; imutex); - if( zDbName==0 ){ - iDb = 0; +static int fts3ContentColumns( + sqlite3 *db, /* Database handle */ + const char *zDb, /* Name of db (i.e. "main", "temp" etc.) */ + const char *zTbl, /* Name of content table */ + const char ***pazCol, /* OUT: Malloc'd array of column names */ + int *pnCol, /* OUT: Size of array *pazCol */ + int *pnStr /* OUT: Bytes of string content */ +){ + int rc = SQLITE_OK; /* Return code */ + char *zSql; /* "SELECT *" statement on zTbl */ + sqlite3_stmt *pStmt = 0; /* Compiled version of zSql */ + + zSql = sqlite3_mprintf("SELECT * FROM %Q.%Q", zDb, zTbl); + if( !zSql ){ + rc = SQLITE_NOMEM; }else{ - for(iDb=0; iDbnDb; iDb++){ - if( strcmp(db->aDb[iDb].zName, zDbName)==0 ) break; - } + rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0); } - if( iDbnDb ){ - Btree *pBtree = db->aDb[iDb].pBt; - if( pBtree ){ - Pager *pPager; - sqlite3_file *fd; - sqlite3BtreeEnter(pBtree); - pPager = sqlite3BtreePager(pBtree); - assert( pPager!=0 ); - fd = sqlite3PagerFile(pPager); - assert( fd!=0 ); - if( op==SQLITE_FCNTL_FILE_POINTER ){ - *(sqlite3_file**)pArg = fd; - rc = SQLITE_OK; - }else if( fd->pMethods ){ - rc = sqlite3OsFileControl(fd, op, pArg); - }else{ - rc = SQLITE_NOTFOUND; + sqlite3_free(zSql); + + if( rc==SQLITE_OK ){ + const char **azCol; /* Output array */ + int nStr = 0; /* Size of all column names (incl. 0x00) */ + int nCol; /* Number of table columns */ + int i; /* Used to iterate through columns */ + + /* Loop through the returned columns. Set nStr to the number of bytes of + ** space required to store a copy of each column name, including the + ** nul-terminator byte. */ + nCol = sqlite3_column_count(pStmt); + for(i=0; imutex); - return rc; + + return rc; } /* -** Interface to the testing logic. +** This function is the implementation of both the xConnect and xCreate +** methods of the FTS3 virtual table. +** +** The argv[] array contains the following: +** +** argv[0] -> module name ("fts3" or "fts4") +** argv[1] -> database name +** argv[2] -> table name +** argv[...] -> "column name" and other module argument fields. */ -SQLITE_API int sqlite3_test_control(int op, ...){ - int rc = 0; -#ifndef SQLITE_OMIT_BUILTIN_TEST - va_list ap; - va_start(ap, op); - switch( op ){ +static int fts3InitVtab( + int isCreate, /* True for xCreate, false for xConnect */ + sqlite3 *db, /* The SQLite database connection */ + void *pAux, /* Hash table containing tokenizers */ + int argc, /* Number of elements in argv array */ + const char * const *argv, /* xCreate/xConnect argument array */ + sqlite3_vtab **ppVTab, /* Write the resulting vtab structure here */ + char **pzErr /* Write any error message here */ +){ + Fts3Hash *pHash = (Fts3Hash *)pAux; + Fts3Table *p = 0; /* Pointer to allocated vtab */ + int rc = SQLITE_OK; /* Return code */ + int i; /* Iterator variable */ + int nByte; /* Size of allocation used for *p */ + int iCol; /* Column index */ + int nString = 0; /* Bytes required to hold all column names */ + int nCol = 0; /* Number of columns in the FTS table */ + char *zCsr; /* Space for holding column names */ + int nDb; /* Bytes required to hold database name */ + int nName; /* Bytes required to hold table name */ + int isFts4 = (argv[0][3]=='4'); /* True for FTS4, false for FTS3 */ + const char **aCol; /* Array of column names */ + sqlite3_tokenizer *pTokenizer = 0; /* Tokenizer for this table */ - /* - ** Save the current state of the PRNG. - */ - case SQLITE_TESTCTRL_PRNG_SAVE: { - sqlite3PrngSaveState(); - break; - } + int nIndex; /* Size of aIndex[] array */ + struct Fts3Index *aIndex = 0; /* Array of indexes for this table */ - /* - ** Restore the state of the PRNG to the last state saved using - ** PRNG_SAVE. If PRNG_SAVE has never before been called, then - ** this verb acts like PRNG_RESET. - */ - case SQLITE_TESTCTRL_PRNG_RESTORE: { - sqlite3PrngRestoreState(); - break; - } + /* The results of parsing supported FTS4 key=value options: */ + int bNoDocsize = 0; /* True to omit %_docsize table */ + int bDescIdx = 0; /* True to store descending indexes */ + char *zPrefix = 0; /* Prefix parameter value (or NULL) */ + char *zCompress = 0; /* compress=? parameter (or NULL) */ + char *zUncompress = 0; /* uncompress=? parameter (or NULL) */ + char *zContent = 0; /* content=? parameter (or NULL) */ + char *zLanguageid = 0; /* languageid=? parameter (or NULL) */ + char **azNotindexed = 0; /* The set of notindexed= columns */ + int nNotindexed = 0; /* Size of azNotindexed[] array */ - /* - ** Reset the PRNG back to its uninitialized state. The next call - ** to sqlite3_randomness() will reseed the PRNG using a single call - ** to the xRandomness method of the default VFS. - */ - case SQLITE_TESTCTRL_PRNG_RESET: { - sqlite3PrngResetState(); - break; - } + assert( strlen(argv[0])==4 ); + assert( (sqlite3_strnicmp(argv[0], "fts4", 4)==0 && isFts4) + || (sqlite3_strnicmp(argv[0], "fts3", 4)==0 && !isFts4) + ); - /* - ** sqlite3_test_control(BITVEC_TEST, size, program) - ** - ** Run a test against a Bitvec object of size. The program argument - ** is an array of integers that defines the test. Return -1 on a - ** memory allocation error, 0 on success, or non-zero for an error. - ** See the sqlite3BitvecBuiltinTest() for additional information. - */ - case SQLITE_TESTCTRL_BITVEC_TEST: { - int sz = va_arg(ap, int); - int *aProg = va_arg(ap, int*); - rc = sqlite3BitvecBuiltinTest(sz, aProg); - break; - } + nDb = (int)strlen(argv[1]) + 1; + nName = (int)strlen(argv[2]) + 1; - /* - ** sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd) - ** - ** Register hooks to call to indicate which malloc() failures - ** are benign. - */ - case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: { - typedef void (*void_function)(void); - void_function xBenignBegin; - void_function xBenignEnd; - xBenignBegin = va_arg(ap, void_function); - xBenignEnd = va_arg(ap, void_function); - sqlite3BenignMallocHooks(xBenignBegin, xBenignEnd); - break; - } + nByte = sizeof(const char *) * (argc-2); + aCol = (const char **)sqlite3_malloc(nByte); + if( aCol ){ + memset((void*)aCol, 0, nByte); + azNotindexed = (char **)sqlite3_malloc(nByte); + } + if( azNotindexed ){ + memset(azNotindexed, 0, nByte); + } + if( !aCol || !azNotindexed ){ + rc = SQLITE_NOMEM; + goto fts3_init_out; + } - /* - ** sqlite3_test_control(SQLITE_TESTCTRL_PENDING_BYTE, unsigned int X) - ** - ** Set the PENDING byte to the value in the argument, if X>0. - ** Make no changes if X==0. Return the value of the pending byte - ** as it existing before this routine was called. - ** - ** IMPORTANT: Changing the PENDING byte from 0x40000000 results in - ** an incompatible database file format. Changing the PENDING byte - ** while any database connection is open results in undefined and - ** dileterious behavior. - */ - case SQLITE_TESTCTRL_PENDING_BYTE: { - rc = PENDING_BYTE; -#ifndef SQLITE_OMIT_WSD - { - unsigned int newVal = va_arg(ap, unsigned int); - if( newVal ) sqlite3PendingByte = newVal; - } -#endif - break; - } + /* Loop through all of the arguments passed by the user to the FTS3/4 + ** module (i.e. all the column names and special arguments). This loop + ** does the following: + ** + ** + Figures out the number of columns the FTSX table will have, and + ** the number of bytes of space that must be allocated to store copies + ** of the column names. + ** + ** + If there is a tokenizer specification included in the arguments, + ** initializes the tokenizer pTokenizer. + */ + for(i=3; rc==SQLITE_OK && i8 + && 0==sqlite3_strnicmp(z, "tokenize", 8) + && 0==sqlite3Fts3IsIdChar(z[8]) + ){ + rc = sqlite3Fts3InitTokenizer(pHash, &z[9], &pTokenizer, pzErr); } + /* Check if it is an FTS4 special argument. */ + else if( isFts4 && fts3IsSpecialColumn(z, &nKey, &zVal) ){ + struct Fts4Option { + const char *zOpt; + int nOpt; + } aFts4Opt[] = { + { "matchinfo", 9 }, /* 0 -> MATCHINFO */ + { "prefix", 6 }, /* 1 -> PREFIX */ + { "compress", 8 }, /* 2 -> COMPRESS */ + { "uncompress", 10 }, /* 3 -> UNCOMPRESS */ + { "order", 5 }, /* 4 -> ORDER */ + { "content", 7 }, /* 5 -> CONTENT */ + { "languageid", 10 }, /* 6 -> LANGUAGEID */ + { "notindexed", 10 } /* 7 -> NOTINDEXED */ + }; - /* - ** sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, int X) - ** - ** This action provides a run-time test to see how the ALWAYS and - ** NEVER macros were defined at compile-time. - ** - ** The return value is ALWAYS(X). - ** - ** The recommended test is X==2. If the return value is 2, that means - ** ALWAYS() and NEVER() are both no-op pass-through macros, which is the - ** default setting. If the return value is 1, then ALWAYS() is either - ** hard-coded to true or else it asserts if its argument is false. - ** The first behavior (hard-coded to true) is the case if - ** SQLITE_TESTCTRL_ASSERT shows that assert() is disabled and the second - ** behavior (assert if the argument to ALWAYS() is false) is the case if - ** SQLITE_TESTCTRL_ASSERT shows that assert() is enabled. - ** - ** The run-time test procedure might look something like this: - ** - ** if( sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, 2)==2 ){ - ** // ALWAYS() and NEVER() are no-op pass-through macros - ** }else if( sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, 1) ){ - ** // ALWAYS(x) asserts that x is true. NEVER(x) asserts x is false. - ** }else{ - ** // ALWAYS(x) is a constant 1. NEVER(x) is a constant 0. - ** } - */ - case SQLITE_TESTCTRL_ALWAYS: { - int x = va_arg(ap,int); - rc = ALWAYS(x); - break; - } + int iOpt; + if( !zVal ){ + rc = SQLITE_NOMEM; + }else{ + for(iOpt=0; iOptnOpt && !sqlite3_strnicmp(z, pOp->zOpt, pOp->nOpt) ){ + break; + } + } + if( iOpt==SizeofArray(aFts4Opt) ){ + *pzErr = sqlite3_mprintf("unrecognized parameter: %s", z); + rc = SQLITE_ERROR; + }else{ + switch( iOpt ){ + case 0: /* MATCHINFO */ + if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){ + *pzErr = sqlite3_mprintf("unrecognized matchinfo: %s", zVal); + rc = SQLITE_ERROR; + } + bNoDocsize = 1; + break; - /* sqlite3_test_control(SQLITE_TESTCTRL_RESERVE, sqlite3 *db, int N) - ** - ** Set the nReserve size to N for the main database on the database - ** connection db. - */ - case SQLITE_TESTCTRL_RESERVE: { - sqlite3 *db = va_arg(ap, sqlite3*); - int x = va_arg(ap,int); - sqlite3_mutex_enter(db->mutex); - sqlite3BtreeSetPageSize(db->aDb[0].pBt, 0, x, 0); - sqlite3_mutex_leave(db->mutex); - break; - } + case 1: /* PREFIX */ + sqlite3_free(zPrefix); + zPrefix = zVal; + zVal = 0; + break; - /* sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS, sqlite3 *db, int N) - ** - ** Enable or disable various optimizations for testing purposes. The - ** argument N is a bitmask of optimizations to be disabled. For normal - ** operation N should be 0. The idea is that a test program (like the - ** SQL Logic Test or SLT test module) can run the same SQL multiple times - ** with various optimizations disabled to verify that the same answer - ** is obtained in every case. - */ - case SQLITE_TESTCTRL_OPTIMIZATIONS: { - sqlite3 *db = va_arg(ap, sqlite3*); - int x = va_arg(ap,int); - db->flags = (x & SQLITE_OptMask) | (db->flags & ~SQLITE_OptMask); - break; - } + case 2: /* COMPRESS */ + sqlite3_free(zCompress); + zCompress = zVal; + zVal = 0; + break; -#ifdef SQLITE_N_KEYWORD - /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord) - ** - ** If zWord is a keyword recognized by the parser, then return the - ** number of keywords. Or if zWord is not a keyword, return 0. - ** - ** This test feature is only available in the amalgamation since - ** the SQLITE_N_KEYWORD macro is not defined in this file if SQLite - ** is built using separate source files. - */ - case SQLITE_TESTCTRL_ISKEYWORD: { - const char *zWord = va_arg(ap, const char*); - int n = sqlite3Strlen30(zWord); - rc = (sqlite3KeywordCode((u8*)zWord, n)!=TK_ID) ? SQLITE_N_KEYWORD : 0; - break; - } -#endif + case 3: /* UNCOMPRESS */ + sqlite3_free(zUncompress); + zUncompress = zVal; + zVal = 0; + break; - /* sqlite3_test_control(SQLITE_TESTCTRL_PGHDRSZ) - ** - ** Return the size of a pcache header in bytes. - */ - case SQLITE_TESTCTRL_PGHDRSZ: { - rc = sizeof(PgHdr); - break; - } + case 4: /* ORDER */ + if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3)) + && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 4)) + ){ + *pzErr = sqlite3_mprintf("unrecognized order: %s", zVal); + rc = SQLITE_ERROR; + } + bDescIdx = (zVal[0]=='d' || zVal[0]=='D'); + break; - /* sqlite3_test_control(SQLITE_TESTCTRL_SCRATCHMALLOC, sz, &pNew, pFree); - ** - ** Pass pFree into sqlite3ScratchFree(). - ** If sz>0 then allocate a scratch buffer into pNew. - */ - case SQLITE_TESTCTRL_SCRATCHMALLOC: { - void *pFree, **ppNew; - int sz; - sz = va_arg(ap, int); - ppNew = va_arg(ap, void**); - pFree = va_arg(ap, void*); - if( sz ) *ppNew = sqlite3ScratchMalloc(sz); - sqlite3ScratchFree(pFree); - break; - } + case 5: /* CONTENT */ + sqlite3_free(zContent); + zContent = zVal; + zVal = 0; + break; - /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff); - ** - ** If parameter onoff is non-zero, configure the wrappers so that all - ** subsequent calls to localtime() and variants fail. If onoff is zero, - ** undo this setting. - */ - case SQLITE_TESTCTRL_LOCALTIME_FAULT: { - sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int); - break; + case 6: /* LANGUAGEID */ + assert( iOpt==6 ); + sqlite3_free(zLanguageid); + zLanguageid = zVal; + zVal = 0; + break; + + case 7: /* NOTINDEXED */ + azNotindexed[nNotindexed++] = zVal; + zVal = 0; + break; + } + } + sqlite3_free(zVal); + } } + /* Otherwise, the argument is a column name. */ + else { + nString += (int)(strlen(z) + 1); + aCol[nCol++] = z; + } } - va_end(ap); -#endif /* SQLITE_OMIT_BUILTIN_TEST */ - return rc; -} -/* -** This is a utility routine, useful to VFS implementations, that checks -** to see if a database file was a URI that contained a specific query -** parameter, and if so obtains the value of the query parameter. -** -** The zFilename argument is the filename pointer passed into the xOpen() -** method of a VFS implementation. The zParam argument is the name of the -** query parameter we seek. This routine returns the value of the zParam -** parameter if it exists. If the parameter does not exist, this routine -** returns a NULL pointer. -*/ -SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){ - zFilename += sqlite3Strlen30(zFilename) + 1; - while( zFilename[0] ){ - int x = strcmp(zFilename, zParam); - zFilename += sqlite3Strlen30(zFilename) + 1; - if( x==0 ) return zFilename; - zFilename += sqlite3Strlen30(zFilename) + 1; + /* If a content=xxx option was specified, the following: + ** + ** 1. Ignore any compress= and uncompress= options. + ** + ** 2. If no column names were specified as part of the CREATE VIRTUAL + ** TABLE statement, use all columns from the content table. + */ + if( rc==SQLITE_OK && zContent ){ + sqlite3_free(zCompress); + sqlite3_free(zUncompress); + zCompress = 0; + zUncompress = 0; + if( nCol==0 ){ + sqlite3_free((void*)aCol); + aCol = 0; + rc = fts3ContentColumns(db, argv[1], zContent, &aCol, &nCol, &nString); + + /* If a languageid= option was specified, remove the language id + ** column from the aCol[] array. */ + if( rc==SQLITE_OK && zLanguageid ){ + int j; + for(j=0; jdb = db; + p->nColumn = nCol; + p->nPendingData = 0; + p->azColumn = (char **)&p[1]; + p->pTokenizer = pTokenizer; + p->nMaxPendingData = FTS3_MAX_PENDING_DATA; + p->bHasDocsize = (isFts4 && bNoDocsize==0); + p->bHasStat = isFts4; + p->bFts4 = isFts4; + p->bDescIdx = bDescIdx; + p->nAutoincrmerge = 0xff; /* 0xff means setting unknown */ + p->zContentTbl = zContent; + p->zLanguageid = zLanguageid; + zContent = 0; + zLanguageid = 0; + TESTONLY( p->inTransaction = -1 ); + TESTONLY( p->mxSavepoint = -1 ); -/* -** Head of a linked list of all sqlite3 objects created by this process -** for which either sqlite3.pBlockingConnection or sqlite3.pUnlockConnection -** is not NULL. This variable may only accessed while the STATIC_MASTER -** mutex is held. -*/ -static sqlite3 *SQLITE_WSD sqlite3BlockedList = 0; + p->aIndex = (struct Fts3Index *)&p->azColumn[nCol]; + memcpy(p->aIndex, aIndex, sizeof(struct Fts3Index) * nIndex); + p->nIndex = nIndex; + for(i=0; iaIndex[i].hPending, FTS3_HASH_STRING, 1); + } + p->abNotindexed = (u8 *)&p->aIndex[nIndex]; -#ifndef NDEBUG -/* -** This function is a complex assert() that verifies the following -** properties of the blocked connections list: -** -** 1) Each entry in the list has a non-NULL value for either -** pUnlockConnection or pBlockingConnection, or both. -** -** 2) All entries in the list that share a common value for -** xUnlockNotify are grouped together. -** -** 3) If the argument db is not NULL, then none of the entries in the -** blocked connections list have pUnlockConnection or pBlockingConnection -** set to db. This is used when closing connection db. -*/ -static void checkListProperties(sqlite3 *db){ - sqlite3 *p; - for(p=sqlite3BlockedList; p; p=p->pNextBlocked){ - int seen = 0; - sqlite3 *p2; + /* Fill in the zName and zDb fields of the vtab structure. */ + zCsr = (char *)&p->abNotindexed[nCol]; + p->zName = zCsr; + memcpy(zCsr, argv[2], nName); + zCsr += nName; + p->zDb = zCsr; + memcpy(zCsr, argv[1], nDb); + zCsr += nDb; - /* Verify property (1) */ - assert( p->pUnlockConnection || p->pBlockingConnection ); + /* Fill in the azColumn array */ + for(iCol=0; iColazColumn[iCol] = zCsr; + zCsr += n+1; + assert( zCsr <= &((char *)p)[nByte] ); + } - /* Verify property (2) */ - for(p2=sqlite3BlockedList; p2!=p; p2=p2->pNextBlocked){ - if( p2->xUnlockNotify==p->xUnlockNotify ) seen = 1; - assert( p2->xUnlockNotify==p->xUnlockNotify || !seen ); - assert( db==0 || p->pUnlockConnection!=db ); - assert( db==0 || p->pBlockingConnection!=db ); + /* Fill in the abNotindexed array */ + for(iCol=0; iColazColumn[iCol]); + for(i=0; iazColumn[iCol], zNot, n) + ){ + p->abNotindexed[iCol] = 1; + sqlite3_free(zNot); + azNotindexed[i] = 0; + } } } -} -#else -# define checkListProperties(x) -#endif - -/* -** Remove connection db from the blocked connections list. If connection -** db is not currently a part of the list, this function is a no-op. -*/ -static void removeFromBlockedList(sqlite3 *db){ - sqlite3 **pp; - assertMutexHeld(); - for(pp=&sqlite3BlockedList; *pp; pp = &(*pp)->pNextBlocked){ - if( *pp==db ){ - *pp = (*pp)->pNextBlocked; - break; + for(i=0; ixUnlockNotify!=db->xUnlockNotify; - pp=&(*pp)->pNextBlocked - ); - db->pNextBlocked = *pp; - *pp = db; -} -/* -** Obtain the STATIC_MASTER mutex. -*/ -static void enterMutex(void){ - sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)); - checkListProperties(0); -} + if( rc==SQLITE_OK && (zCompress==0)!=(zUncompress==0) ){ + char const *zMiss = (zCompress==0 ? "compress" : "uncompress"); + rc = SQLITE_ERROR; + *pzErr = sqlite3_mprintf("missing %s parameter in fts4 constructor", zMiss); + } + p->zReadExprlist = fts3ReadExprList(p, zUncompress, &rc); + p->zWriteExprlist = fts3WriteExprList(p, zCompress, &rc); + if( rc!=SQLITE_OK ) goto fts3_init_out; -/* -** Release the STATIC_MASTER mutex. -*/ -static void leaveMutex(void){ - assertMutexHeld(); - checkListProperties(0); - sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)); -} + /* If this is an xCreate call, create the underlying tables in the + ** database. TODO: For xConnect(), it could verify that said tables exist. + */ + if( isCreate ){ + rc = fts3CreateTables(p); + } -/* -** Register an unlock-notify callback. -** -** This is called after connection "db" has attempted some operation -** but has received an SQLITE_LOCKED error because another connection -** (call it pOther) in the same process was busy using the same shared -** cache. pOther is found by looking at db->pBlockingConnection. -** -** If there is no blocking connection, the callback is invoked immediately, -** before this routine returns. -** -** If pOther is already blocked on db, then report SQLITE_LOCKED, to indicate -** a deadlock. -** -** Otherwise, make arrangements to invoke xNotify when pOther drops -** its locks. -** -** Each call to this routine overrides any prior callbacks registered -** on the same "db". If xNotify==0 then any prior callbacks are immediately -** cancelled. -*/ -SQLITE_API int sqlite3_unlock_notify( - sqlite3 *db, - void (*xNotify)(void **, int), - void *pArg -){ - int rc = SQLITE_OK; + /* Check to see if a legacy fts3 table has been "upgraded" by the + ** addition of a %_stat table so that it can use incremental merge. + */ + if( !isFts4 && !isCreate ){ + p->bHasStat = 2; + } - sqlite3_mutex_enter(db->mutex); - enterMutex(); + /* Figure out the page-size for the database. This is required in order to + ** estimate the cost of loading large doclists from the database. */ + fts3DatabasePageSize(&rc, p); + p->nNodeSize = p->nPgsz-35; - if( xNotify==0 ){ - removeFromBlockedList(db); - db->pBlockingConnection = 0; - db->pUnlockConnection = 0; - db->xUnlockNotify = 0; - db->pUnlockArg = 0; - }else if( 0==db->pBlockingConnection ){ - /* The blocking transaction has been concluded. Or there never was a - ** blocking transaction. In either case, invoke the notify callback - ** immediately. - */ - xNotify(&pArg, 1); - }else{ - sqlite3 *p; + /* Declare the table schema to SQLite. */ + fts3DeclareVtab(&rc, p); - for(p=db->pBlockingConnection; p && p!=db; p=p->pUnlockConnection){} +fts3_init_out: + sqlite3_free(zPrefix); + sqlite3_free(aIndex); + sqlite3_free(zCompress); + sqlite3_free(zUncompress); + sqlite3_free(zContent); + sqlite3_free(zLanguageid); + for(i=0; ipUnlockConnection = db->pBlockingConnection; - db->xUnlockNotify = xNotify; - db->pUnlockArg = pArg; - removeFromBlockedList(db); - addToBlockedList(db); + fts3DisconnectMethod((sqlite3_vtab *)p); + }else if( pTokenizer ){ + pTokenizer->pModule->xDestroy(pTokenizer); } + }else{ + assert( p->pSegments==0 ); + *ppVTab = &p->base; } - - leaveMutex(); - assert( !db->mallocFailed ); - sqlite3Error(db, rc, (rc?"database is deadlocked":0)); - sqlite3_mutex_leave(db->mutex); return rc; } /* -** This function is called while stepping or preparing a statement -** associated with connection db. The operation will return SQLITE_LOCKED -** to the user because it requires a lock that will not be available -** until connection pBlocker concludes its current transaction. +** The xConnect() and xCreate() methods for the virtual table. All the +** work is done in function fts3InitVtab(). */ -SQLITE_PRIVATE void sqlite3ConnectionBlocked(sqlite3 *db, sqlite3 *pBlocker){ - enterMutex(); - if( db->pBlockingConnection==0 && db->pUnlockConnection==0 ){ - addToBlockedList(db); - } - db->pBlockingConnection = pBlocker; - leaveMutex(); +static int fts3ConnectMethod( + sqlite3 *db, /* Database connection */ + void *pAux, /* Pointer to tokenizer hash table */ + int argc, /* Number of elements in argv array */ + const char * const *argv, /* xCreate/xConnect argument array */ + sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ + char **pzErr /* OUT: sqlite3_malloc'd error message */ +){ + return fts3InitVtab(0, db, pAux, argc, argv, ppVtab, pzErr); +} +static int fts3CreateMethod( + sqlite3 *db, /* Database connection */ + void *pAux, /* Pointer to tokenizer hash table */ + int argc, /* Number of elements in argv array */ + const char * const *argv, /* xCreate/xConnect argument array */ + sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ + char **pzErr /* OUT: sqlite3_malloc'd error message */ +){ + return fts3InitVtab(1, db, pAux, argc, argv, ppVtab, pzErr); } /* -** This function is called when -** the transaction opened by database db has just finished. Locks held -** by database connection db have been released. -** -** This function loops through each entry in the blocked connections -** list and does the following: -** -** 1) If the sqlite3.pBlockingConnection member of a list entry is -** set to db, then set pBlockingConnection=0. -** -** 2) If the sqlite3.pUnlockConnection member of a list entry is -** set to db, then invoke the configured unlock-notify callback and -** set pUnlockConnection=0. -** -** 3) If the two steps above mean that pBlockingConnection==0 and -** pUnlockConnection==0, remove the entry from the blocked connections -** list. +** Set the pIdxInfo->estimatedRows variable to nRow. Unless this +** extension is currently being used by a version of SQLite too old to +** support estimatedRows. In that case this function is a no-op. */ -SQLITE_PRIVATE void sqlite3ConnectionUnlocked(sqlite3 *db){ - void (*xUnlockNotify)(void **, int) = 0; /* Unlock-notify cb to invoke */ - int nArg = 0; /* Number of entries in aArg[] */ - sqlite3 **pp; /* Iterator variable */ - void **aArg; /* Arguments to the unlock callback */ - void **aDyn = 0; /* Dynamically allocated space for aArg[] */ - void *aStatic[16]; /* Starter space for aArg[]. No malloc required */ +static void fts3SetEstimatedRows(sqlite3_index_info *pIdxInfo, i64 nRow){ +#if SQLITE_VERSION_NUMBER>=3008002 + if( sqlite3_libversion_number()>=3008002 ){ + pIdxInfo->estimatedRows = nRow; + } +#endif +} - aArg = aStatic; - enterMutex(); /* Enter STATIC_MASTER mutex */ +/* +** Implementation of the xBestIndex method for FTS3 tables. There +** are three possible strategies, in order of preference: +** +** 1. Direct lookup by rowid or docid. +** 2. Full-text search using a MATCH operator on a non-docid column. +** 3. Linear scan of %_content table. +*/ +static int fts3BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){ + Fts3Table *p = (Fts3Table *)pVTab; + int i; /* Iterator variable */ + int iCons = -1; /* Index of constraint to use */ - /* This loop runs once for each entry in the blocked-connections list. */ - for(pp=&sqlite3BlockedList; *pp; /* no-op */ ){ - sqlite3 *p = *pp; + int iLangidCons = -1; /* Index of langid=x constraint, if present */ + int iDocidGe = -1; /* Index of docid>=x constraint, if present */ + int iDocidLe = -1; /* Index of docid<=x constraint, if present */ + int iIdx; - /* Step 1. */ - if( p->pBlockingConnection==db ){ - p->pBlockingConnection = 0; + /* By default use a full table scan. This is an expensive option, + ** so search through the constraints to see if a more efficient + ** strategy is possible. + */ + pInfo->idxNum = FTS3_FULLSCAN_SEARCH; + pInfo->estimatedCost = 5000000; + for(i=0; inConstraint; i++){ + int bDocid; /* True if this constraint is on docid */ + struct sqlite3_index_constraint *pCons = &pInfo->aConstraint[i]; + if( pCons->usable==0 ){ + if( pCons->op==SQLITE_INDEX_CONSTRAINT_MATCH ){ + /* There exists an unusable MATCH constraint. This means that if + ** the planner does elect to use the results of this call as part + ** of the overall query plan the user will see an "unable to use + ** function MATCH in the requested context" error. To discourage + ** this, return a very high cost here. */ + pInfo->idxNum = FTS3_FULLSCAN_SEARCH; + pInfo->estimatedCost = 1e50; + fts3SetEstimatedRows(pInfo, ((sqlite3_int64)1) << 50); + return SQLITE_OK; + } + continue; } - /* Step 2. */ - if( p->pUnlockConnection==db ){ - assert( p->xUnlockNotify ); - if( p->xUnlockNotify!=xUnlockNotify && nArg!=0 ){ - xUnlockNotify(aArg, nArg); - nArg = 0; - } + bDocid = (pCons->iColumn<0 || pCons->iColumn==p->nColumn+1); - sqlite3BeginBenignMalloc(); - assert( aArg==aDyn || (aDyn==0 && aArg==aStatic) ); - assert( nArg<=(int)ArraySize(aStatic) || aArg==aDyn ); - if( (!aDyn && nArg==(int)ArraySize(aStatic)) - || (aDyn && nArg==(int)(sqlite3MallocSize(aDyn)/sizeof(void*))) - ){ - /* The aArg[] array needs to grow. */ - void **pNew = (void **)sqlite3Malloc(nArg*sizeof(void *)*2); - if( pNew ){ - memcpy(pNew, aArg, nArg*sizeof(void *)); - sqlite3_free(aDyn); - aDyn = aArg = pNew; - }else{ - /* This occurs when the array of context pointers that need to - ** be passed to the unlock-notify callback is larger than the - ** aStatic[] array allocated on the stack and the attempt to - ** allocate a larger array from the heap has failed. - ** - ** This is a difficult situation to handle. Returning an error - ** code to the caller is insufficient, as even if an error code - ** is returned the transaction on connection db will still be - ** closed and the unlock-notify callbacks on blocked connections - ** will go unissued. This might cause the application to wait - ** indefinitely for an unlock-notify callback that will never - ** arrive. - ** - ** Instead, invoke the unlock-notify callback with the context - ** array already accumulated. We can then clear the array and - ** begin accumulating any further context pointers without - ** requiring any dynamic allocation. This is sub-optimal because - ** it means that instead of one callback with a large array of - ** context pointers the application will receive two or more - ** callbacks with smaller arrays of context pointers, which will - ** reduce the applications ability to prioritize multiple - ** connections. But it is the best that can be done under the - ** circumstances. - */ - xUnlockNotify(aArg, nArg); - nArg = 0; - } - } - sqlite3EndBenignMalloc(); + /* A direct lookup on the rowid or docid column. Assign a cost of 1.0. */ + if( iCons<0 && pCons->op==SQLITE_INDEX_CONSTRAINT_EQ && bDocid ){ + pInfo->idxNum = FTS3_DOCID_SEARCH; + pInfo->estimatedCost = 1.0; + iCons = i; + } + + /* A MATCH constraint. Use a full-text search. + ** + ** If there is more than one MATCH constraint available, use the first + ** one encountered. If there is both a MATCH constraint and a direct + ** rowid/docid lookup, prefer the MATCH strategy. This is done even + ** though the rowid/docid lookup is faster than a MATCH query, selecting + ** it would lead to an "unable to use function MATCH in the requested + ** context" error. + */ + if( pCons->op==SQLITE_INDEX_CONSTRAINT_MATCH + && pCons->iColumn>=0 && pCons->iColumn<=p->nColumn + ){ + pInfo->idxNum = FTS3_FULLTEXT_SEARCH + pCons->iColumn; + pInfo->estimatedCost = 2.0; + iCons = i; + } - aArg[nArg++] = p->pUnlockArg; - xUnlockNotify = p->xUnlockNotify; - p->pUnlockConnection = 0; - p->xUnlockNotify = 0; - p->pUnlockArg = 0; + /* Equality constraint on the langid column */ + if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ + && pCons->iColumn==p->nColumn + 2 + ){ + iLangidCons = i; } - /* Step 3. */ - if( p->pBlockingConnection==0 && p->pUnlockConnection==0 ){ - /* Remove connection p from the blocked connections list. */ - *pp = p->pNextBlocked; - p->pNextBlocked = 0; - }else{ - pp = &p->pNextBlocked; + if( bDocid ){ + switch( pCons->op ){ + case SQLITE_INDEX_CONSTRAINT_GE: + case SQLITE_INDEX_CONSTRAINT_GT: + iDocidGe = i; + break; + + case SQLITE_INDEX_CONSTRAINT_LE: + case SQLITE_INDEX_CONSTRAINT_LT: + iDocidLe = i; + break; + } } } - if( nArg!=0 ){ - xUnlockNotify(aArg, nArg); + iIdx = 1; + if( iCons>=0 ){ + pInfo->aConstraintUsage[iCons].argvIndex = iIdx++; + pInfo->aConstraintUsage[iCons].omit = 1; + } + if( iLangidCons>=0 ){ + pInfo->idxNum |= FTS3_HAVE_LANGID; + pInfo->aConstraintUsage[iLangidCons].argvIndex = iIdx++; + } + if( iDocidGe>=0 ){ + pInfo->idxNum |= FTS3_HAVE_DOCID_GE; + pInfo->aConstraintUsage[iDocidGe].argvIndex = iIdx++; + } + if( iDocidLe>=0 ){ + pInfo->idxNum |= FTS3_HAVE_DOCID_LE; + pInfo->aConstraintUsage[iDocidLe].argvIndex = iIdx++; + } + + /* Regardless of the strategy selected, FTS can deliver rows in rowid (or + ** docid) order. Both ascending and descending are possible. + */ + if( pInfo->nOrderBy==1 ){ + struct sqlite3_index_orderby *pOrder = &pInfo->aOrderBy[0]; + if( pOrder->iColumn<0 || pOrder->iColumn==p->nColumn+1 ){ + if( pOrder->desc ){ + pInfo->idxStr = "DESC"; + }else{ + pInfo->idxStr = "ASC"; + } + pInfo->orderByConsumed = 1; + } } - sqlite3_free(aDyn); - leaveMutex(); /* Leave STATIC_MASTER mutex */ + + assert( p->pSegments==0 ); + return SQLITE_OK; } /* -** This is called when the database connection passed as an argument is -** being closed. The connection is removed from the blocked list. +** Implementation of xOpen method. */ -SQLITE_PRIVATE void sqlite3ConnectionClosed(sqlite3 *db){ - sqlite3ConnectionUnlocked(db); - enterMutex(); - removeFromBlockedList(db); - checkListProperties(db); - leaveMutex(); +static int fts3OpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ + sqlite3_vtab_cursor *pCsr; /* Allocated cursor */ + + UNUSED_PARAMETER(pVTab); + + /* Allocate a buffer large enough for an Fts3Cursor structure. If the + ** allocation succeeds, zero it and return SQLITE_OK. Otherwise, + ** if the allocation fails, return SQLITE_NOMEM. + */ + *ppCsr = pCsr = (sqlite3_vtab_cursor *)sqlite3_malloc(sizeof(Fts3Cursor)); + if( !pCsr ){ + return SQLITE_NOMEM; + } + memset(pCsr, 0, sizeof(Fts3Cursor)); + return SQLITE_OK; } -#endif -/************** End of notify.c **********************************************/ -/************** Begin file fts3.c ********************************************/ /* -** 2006 Oct 10 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** Close the cursor. For additional information see the documentation +** on the xClose method of the virtual table interface. +*/ +static int fts3CloseMethod(sqlite3_vtab_cursor *pCursor){ + Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; + assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); + sqlite3_finalize(pCsr->pStmt); + sqlite3Fts3ExprFree(pCsr->pExpr); + sqlite3Fts3FreeDeferredTokens(pCsr); + sqlite3_free(pCsr->aDoclist); + sqlite3_free(pCsr->aMatchinfo); + assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** If pCsr->pStmt has not been prepared (i.e. if pCsr->pStmt==0), then +** compose and prepare an SQL statement of the form: ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** "SELECT FROM %_content WHERE rowid = ?" ** -****************************************************************************** +** (or the equivalent for a content=xxx table) and set pCsr->pStmt to +** it. If an error occurs, return an SQLite error code. ** -** This is an SQLite module implementing full-text search. +** Otherwise, set *ppStmt to point to pCsr->pStmt and return SQLITE_OK. */ +static int fts3CursorSeekStmt(Fts3Cursor *pCsr, sqlite3_stmt **ppStmt){ + int rc = SQLITE_OK; + if( pCsr->pStmt==0 ){ + Fts3Table *p = (Fts3Table *)pCsr->base.pVtab; + char *zSql; + zSql = sqlite3_mprintf("SELECT %s WHERE rowid = ?", p->zReadExprlist); + if( !zSql ) return SQLITE_NOMEM; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); + sqlite3_free(zSql); + } + *ppStmt = pCsr->pStmt; + return rc; +} /* -** The code in this file is only compiled if: -** -** * The FTS3 module is being built as an extension -** (in which case SQLITE_CORE is not defined), or -** -** * The FTS3 module is being built into the core of -** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). +** Position the pCsr->pStmt statement so that it is on the row +** of the %_content table that contains the last match. Return +** SQLITE_OK on success. */ +static int fts3CursorSeek(sqlite3_context *pContext, Fts3Cursor *pCsr){ + int rc = SQLITE_OK; + if( pCsr->isRequireSeek ){ + sqlite3_stmt *pStmt = 0; -/* The full-text index is stored in a series of b+tree (-like) -** structures called segments which map terms to doclists. The -** structures are like b+trees in layout, but are constructed from the -** bottom up in optimal fashion and are not updatable. Since trees -** are built from the bottom up, things will be described from the -** bottom up. -** -** -**** Varints **** -** The basic unit of encoding is a variable-length integer called a -** varint. We encode variable-length integers in little-endian order -** using seven bits * per byte as follows: -** -** KEY: -** A = 0xxxxxxx 7 bits of data and one flag bit -** B = 1xxxxxxx 7 bits of data and one flag bit -** -** 7 bits - A -** 14 bits - BA -** 21 bits - BBA -** and so on. -** -** This is similar in concept to how sqlite encodes "varints" but -** the encoding is not the same. SQLite varints are big-endian -** are are limited to 9 bytes in length whereas FTS3 varints are -** little-endian and can be up to 10 bytes in length (in theory). -** -** Example encodings: -** -** 1: 0x01 -** 127: 0x7f -** 128: 0x81 0x00 -** -** -**** Document lists **** -** A doclist (document list) holds a docid-sorted list of hits for a -** given term. Doclists hold docids and associated token positions. -** A docid is the unique integer identifier for a single document. -** A position is the index of a word within the document. The first -** word of the document has a position of 0. -** -** FTS3 used to optionally store character offsets using a compile-time -** option. But that functionality is no longer supported. -** -** A doclist is stored like this: -** -** array { -** varint docid; -** array { (position list for column 0) -** varint position; (2 more than the delta from previous position) -** } -** array { -** varint POS_COLUMN; (marks start of position list for new column) -** varint column; (index of new column) -** array { -** varint position; (2 more than the delta from previous position) -** } -** } -** varint POS_END; (marks end of positions for this document. -** } -** -** Here, array { X } means zero or more occurrences of X, adjacent in -** memory. A "position" is an index of a token in the token stream -** generated by the tokenizer. Note that POS_END and POS_COLUMN occur -** in the same logical place as the position element, and act as sentinals -** ending a position list array. POS_END is 0. POS_COLUMN is 1. -** The positions numbers are not stored literally but rather as two more -** than the difference from the prior position, or the just the position plus -** 2 for the first position. Example: -** -** label: A B C D E F G H I J K -** value: 123 5 9 1 1 14 35 0 234 72 0 -** -** The 123 value is the first docid. For column zero in this document -** there are two matches at positions 3 and 10 (5-2 and 9-2+3). The 1 -** at D signals the start of a new column; the 1 at E indicates that the -** new column is column number 1. There are two positions at 12 and 45 -** (14-2 and 35-2+12). The 0 at H indicate the end-of-document. The -** 234 at I is the next docid. It has one position 72 (72-2) and then -** terminates with the 0 at K. -** -** A "position-list" is the list of positions for multiple columns for -** a single docid. A "column-list" is the set of positions for a single -** column. Hence, a position-list consists of one or more column-lists, -** a document record consists of a docid followed by a position-list and -** a doclist consists of one or more document records. -** -** A bare doclist omits the position information, becoming an -** array of varint-encoded docids. -** -**** Segment leaf nodes **** -** Segment leaf nodes store terms and doclists, ordered by term. Leaf -** nodes are written using LeafWriter, and read using LeafReader (to -** iterate through a single leaf node's data) and LeavesReader (to -** iterate through a segment's entire leaf layer). Leaf nodes have -** the format: -** -** varint iHeight; (height from leaf level, always 0) -** varint nTerm; (length of first term) -** char pTerm[nTerm]; (content of first term) -** varint nDoclist; (length of term's associated doclist) -** char pDoclist[nDoclist]; (content of doclist) -** array { -** (further terms are delta-encoded) -** varint nPrefix; (length of prefix shared with previous term) -** varint nSuffix; (length of unshared suffix) -** char pTermSuffix[nSuffix];(unshared suffix of next term) -** varint nDoclist; (length of term's associated doclist) -** char pDoclist[nDoclist]; (content of doclist) -** } -** -** Here, array { X } means zero or more occurrences of X, adjacent in -** memory. -** -** Leaf nodes are broken into blocks which are stored contiguously in -** the %_segments table in sorted order. This means that when the end -** of a node is reached, the next term is in the node with the next -** greater node id. -** -** New data is spilled to a new leaf node when the current node -** exceeds LEAF_MAX bytes (default 2048). New data which itself is -** larger than STANDALONE_MIN (default 1024) is placed in a standalone -** node (a leaf node with a single term and doclist). The goal of -** these settings is to pack together groups of small doclists while -** making it efficient to directly access large doclists. The -** assumption is that large doclists represent terms which are more -** likely to be query targets. -** -** TODO(shess) It may be useful for blocking decisions to be more -** dynamic. For instance, it may make more sense to have a 2.5k leaf -** node rather than splitting into 2k and .5k nodes. My intuition is -** that this might extend through 2x or 4x the pagesize. -** -** -**** Segment interior nodes **** -** Segment interior nodes store blockids for subtree nodes and terms -** to describe what data is stored by the each subtree. Interior -** nodes are written using InteriorWriter, and read using -** InteriorReader. InteriorWriters are created as needed when -** SegmentWriter creates new leaf nodes, or when an interior node -** itself grows too big and must be split. The format of interior -** nodes: -** -** varint iHeight; (height from leaf level, always >0) -** varint iBlockid; (block id of node's leftmost subtree) -** optional { -** varint nTerm; (length of first term) -** char pTerm[nTerm]; (content of first term) -** array { -** (further terms are delta-encoded) -** varint nPrefix; (length of shared prefix with previous term) -** varint nSuffix; (length of unshared suffix) -** char pTermSuffix[nSuffix]; (unshared suffix of next term) -** } -** } -** -** Here, optional { X } means an optional element, while array { X } -** means zero or more occurrences of X, adjacent in memory. -** -** An interior node encodes n terms separating n+1 subtrees. The -** subtree blocks are contiguous, so only the first subtree's blockid -** is encoded. The subtree at iBlockid will contain all terms less -** than the first term encoded (or all terms if no term is encoded). -** Otherwise, for terms greater than or equal to pTerm[i] but less -** than pTerm[i+1], the subtree for that term will be rooted at -** iBlockid+i. Interior nodes only store enough term data to -** distinguish adjacent children (if the rightmost term of the left -** child is "something", and the leftmost term of the right child is -** "wicked", only "w" is stored). -** -** New data is spilled to a new interior node at the same height when -** the current node exceeds INTERIOR_MAX bytes (default 2048). -** INTERIOR_MIN_TERMS (default 7) keeps large terms from monopolizing -** interior nodes and making the tree too skinny. The interior nodes -** at a given height are naturally tracked by interior nodes at -** height+1, and so on. -** -** -**** Segment directory **** -** The segment directory in table %_segdir stores meta-information for -** merging and deleting segments, and also the root node of the -** segment's tree. -** -** The root node is the top node of the segment's tree after encoding -** the entire segment, restricted to ROOT_MAX bytes (default 1024). -** This could be either a leaf node or an interior node. If the top -** node requires more than ROOT_MAX bytes, it is flushed to %_segments -** and a new root interior node is generated (which should always fit -** within ROOT_MAX because it only needs space for 2 varints, the -** height and the blockid of the previous root). -** -** The meta-information in the segment directory is: -** level - segment level (see below) -** idx - index within level -** - (level,idx uniquely identify a segment) -** start_block - first leaf node -** leaves_end_block - last leaf node -** end_block - last block (including interior nodes) -** root - contents of root node -** -** If the root node is a leaf node, then start_block, -** leaves_end_block, and end_block are all 0. -** -** -**** Segment merging **** -** To amortize update costs, segments are grouped into levels and -** merged in batches. Each increase in level represents exponentially -** more documents. -** -** New documents (actually, document updates) are tokenized and -** written individually (using LeafWriter) to a level 0 segment, with -** incrementing idx. When idx reaches MERGE_COUNT (default 16), all -** level 0 segments are merged into a single level 1 segment. Level 1 -** is populated like level 0, and eventually MERGE_COUNT level 1 -** segments are merged to a single level 2 segment (representing -** MERGE_COUNT^2 updates), and so on. -** -** A segment merge traverses all segments at a given level in -** parallel, performing a straightforward sorted merge. Since segment -** leaf nodes are written in to the %_segments table in order, this -** merge traverses the underlying sqlite disk structures efficiently. -** After the merge, all segment blocks from the merged level are -** deleted. -** -** MERGE_COUNT controls how often we merge segments. 16 seems to be -** somewhat of a sweet spot for insertion performance. 32 and 64 show -** very similar performance numbers to 16 on insertion, though they're -** a tiny bit slower (perhaps due to more overhead in merge-time -** sorting). 8 is about 20% slower than 16, 4 about 50% slower than -** 16, 2 about 66% slower than 16. -** -** At query time, high MERGE_COUNT increases the number of segments -** which need to be scanned and merged. For instance, with 100k docs -** inserted: -** -** MERGE_COUNT segments -** 16 25 -** 8 12 -** 4 10 -** 2 6 + rc = fts3CursorSeekStmt(pCsr, &pStmt); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pCsr->pStmt, 1, pCsr->iPrevId); + pCsr->isRequireSeek = 0; + if( SQLITE_ROW==sqlite3_step(pCsr->pStmt) ){ + return SQLITE_OK; + }else{ + rc = sqlite3_reset(pCsr->pStmt); + if( rc==SQLITE_OK && ((Fts3Table *)pCsr->base.pVtab)->zContentTbl==0 ){ + /* If no row was found and no error has occurred, then the %_content + ** table is missing a row that is present in the full-text index. + ** The data structures are corrupt. */ + rc = FTS_CORRUPT_VTAB; + pCsr->isEof = 1; + } + } + } + } + + if( rc!=SQLITE_OK && pContext ){ + sqlite3_result_error_code(pContext, rc); + } + return rc; +} + +/* +** This function is used to process a single interior node when searching +** a b-tree for a term or term prefix. The node data is passed to this +** function via the zNode/nNode parameters. The term to search for is +** passed in zTerm/nTerm. ** -** This appears to have only a moderate impact on queries for very -** frequent terms (which are somewhat dominated by segment merge -** costs), and infrequent and non-existent terms still seem to be fast -** even with many segments. +** If piFirst is not NULL, then this function sets *piFirst to the blockid +** of the child node that heads the sub-tree that may contain the term. ** -** TODO(shess) That said, it would be nice to have a better query-side -** argument for MERGE_COUNT of 16. Also, it is possible/likely that -** optimizations to things like doclist merging will swing the sweet -** spot around. +** If piLast is not NULL, then *piLast is set to the right-most child node +** that heads a sub-tree that may contain a term for which zTerm/nTerm is +** a prefix. ** +** If an OOM error occurs, SQLITE_NOMEM is returned. Otherwise, SQLITE_OK. +*/ +static int fts3ScanInteriorNode( + const char *zTerm, /* Term to select leaves for */ + int nTerm, /* Size of term zTerm in bytes */ + const char *zNode, /* Buffer containing segment interior node */ + int nNode, /* Size of buffer at zNode */ + sqlite3_int64 *piFirst, /* OUT: Selected child node */ + sqlite3_int64 *piLast /* OUT: Selected child node */ +){ + int rc = SQLITE_OK; /* Return code */ + const char *zCsr = zNode; /* Cursor to iterate through node */ + const char *zEnd = &zCsr[nNode];/* End of interior node buffer */ + char *zBuffer = 0; /* Buffer to load terms into */ + int nAlloc = 0; /* Size of allocated buffer */ + int isFirstTerm = 1; /* True when processing first term on page */ + sqlite3_int64 iChild; /* Block id of child node to descend to */ + + /* Skip over the 'height' varint that occurs at the start of every + ** interior node. Then load the blockid of the left-child of the b-tree + ** node into variable iChild. + ** + ** Even if the data structure on disk is corrupted, this (reading two + ** varints from the buffer) does not risk an overread. If zNode is a + ** root node, then the buffer comes from a SELECT statement. SQLite does + ** not make this guarantee explicitly, but in practice there are always + ** either more than 20 bytes of allocated space following the nNode bytes of + ** contents, or two zero bytes. Or, if the node is read from the %_segments + ** table, then there are always 20 bytes of zeroed padding following the + ** nNode bytes of content (see sqlite3Fts3ReadBlock() for details). + */ + zCsr += sqlite3Fts3GetVarint(zCsr, &iChild); + zCsr += sqlite3Fts3GetVarint(zCsr, &iChild); + if( zCsr>zEnd ){ + return FTS_CORRUPT_VTAB; + } + + while( zCsrzEnd ){ + rc = FTS_CORRUPT_VTAB; + goto finish_scan; + } + if( nPrefix+nSuffix>nAlloc ){ + char *zNew; + nAlloc = (nPrefix+nSuffix) * 2; + zNew = (char *)sqlite3_realloc(zBuffer, nAlloc); + if( !zNew ){ + rc = SQLITE_NOMEM; + goto finish_scan; + } + zBuffer = zNew; + } + assert( zBuffer ); + memcpy(&zBuffer[nPrefix], zCsr, nSuffix); + nBuffer = nPrefix + nSuffix; + zCsr += nSuffix; + + /* Compare the term we are searching for with the term just loaded from + ** the interior node. If the specified term is greater than or equal + ** to the term from the interior node, then all terms on the sub-tree + ** headed by node iChild are smaller than zTerm. No need to search + ** iChild. + ** + ** If the interior node term is larger than the specified term, then + ** the tree headed by iChild may contain the specified term. + */ + cmp = memcmp(zTerm, zBuffer, (nBuffer>nTerm ? nTerm : nBuffer)); + if( piFirst && (cmp<0 || (cmp==0 && nBuffer>nTerm)) ){ + *piFirst = iChild; + piFirst = 0; + } + + if( piLast && cmp<0 ){ + *piLast = iChild; + piLast = 0; + } + + iChild++; + }; + + if( piFirst ) *piFirst = iChild; + if( piLast ) *piLast = iChild; + + finish_scan: + sqlite3_free(zBuffer); + return rc; +} + + +/* +** The buffer pointed to by argument zNode (size nNode bytes) contains an +** interior node of a b-tree segment. The zTerm buffer (size nTerm bytes) +** contains a term. This function searches the sub-tree headed by the zNode +** node for the range of leaf nodes that may contain the specified term +** or terms for which the specified term is a prefix. ** +** If piLeaf is not NULL, then *piLeaf is set to the blockid of the +** left-most leaf node in the tree that may contain the specified term. +** If piLeaf2 is not NULL, then *piLeaf2 is set to the blockid of the +** right-most leaf node that may contain a term for which the specified +** term is a prefix. ** -**** Handling of deletions and updates **** -** Since we're using a segmented structure, with no docid-oriented -** index into the term index, we clearly cannot simply update the term -** index when a document is deleted or updated. For deletions, we -** write an empty doclist (varint(docid) varint(POS_END)), for updates -** we simply write the new doclist. Segment merges overwrite older -** data for a particular docid with newer data, so deletes or updates -** will eventually overtake the earlier data and knock it out. The -** query logic likewise merges doclists so that newer data knocks out -** older data. +** It is possible that the range of returned leaf nodes does not contain +** the specified term or any terms for which it is a prefix. However, if the +** segment does contain any such terms, they are stored within the identified +** range. Because this function only inspects interior segment nodes (and +** never loads leaf nodes into memory), it is not possible to be sure. ** -** TODO(shess) Provide a VACUUM type operation to clear out all -** deletions and duplications. This would basically be a forced merge -** into a single segment. +** If an error occurs, an error code other than SQLITE_OK is returned. +*/ +static int fts3SelectLeaf( + Fts3Table *p, /* Virtual table handle */ + const char *zTerm, /* Term to select leaves for */ + int nTerm, /* Size of term zTerm in bytes */ + const char *zNode, /* Buffer containing segment interior node */ + int nNode, /* Size of buffer at zNode */ + sqlite3_int64 *piLeaf, /* Selected leaf node */ + sqlite3_int64 *piLeaf2 /* Selected leaf node */ +){ + int rc; /* Return code */ + int iHeight; /* Height of this node in tree */ + + assert( piLeaf || piLeaf2 ); + + fts3GetVarint32(zNode, &iHeight); + rc = fts3ScanInteriorNode(zTerm, nTerm, zNode, nNode, piLeaf, piLeaf2); + assert( !piLeaf2 || !piLeaf || rc!=SQLITE_OK || (*piLeaf<=*piLeaf2) ); + + if( rc==SQLITE_OK && iHeight>1 ){ + char *zBlob = 0; /* Blob read from %_segments table */ + int nBlob; /* Size of zBlob in bytes */ + + if( piLeaf && piLeaf2 && (*piLeaf!=*piLeaf2) ){ + rc = sqlite3Fts3ReadBlock(p, *piLeaf, &zBlob, &nBlob, 0); + if( rc==SQLITE_OK ){ + rc = fts3SelectLeaf(p, zTerm, nTerm, zBlob, nBlob, piLeaf, 0); + } + sqlite3_free(zBlob); + piLeaf = 0; + zBlob = 0; + } + + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3ReadBlock(p, piLeaf?*piLeaf:*piLeaf2, &zBlob, &nBlob, 0); + } + if( rc==SQLITE_OK ){ + rc = fts3SelectLeaf(p, zTerm, nTerm, zBlob, nBlob, piLeaf, piLeaf2); + } + sqlite3_free(zBlob); + } + + return rc; +} + +/* +** This function is used to create delta-encoded serialized lists of FTS3 +** varints. Each call to this function appends a single varint to a list. */ +static void fts3PutDeltaVarint( + char **pp, /* IN/OUT: Output pointer */ + sqlite3_int64 *piPrev, /* IN/OUT: Previous value written to list */ + sqlite3_int64 iVal /* Write this value to the list */ +){ + assert( iVal-*piPrev > 0 || (*piPrev==0 && iVal==0) ); + *pp += sqlite3Fts3PutVarint(*pp, iVal-*piPrev); + *piPrev = iVal; +} -/************** Include fts3Int.h in the middle of fts3.c ********************/ -/************** Begin file fts3Int.h *****************************************/ /* -** 2009 Nov 12 +** When this function is called, *ppPoslist is assumed to point to the +** start of a position-list. After it returns, *ppPoslist points to the +** first byte after the position-list. ** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** A position list is list of positions (delta encoded) and columns for +** a single document record of a doclist. So, in other words, this +** routine advances *ppPoslist so that it points to the next docid in +** the doclist, or to the first byte past the end of the doclist. ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** If pp is not NULL, then the contents of the position list are copied +** to *pp. *pp is set to point to the first byte past the last byte copied +** before this function returns. +*/ +static void fts3PoslistCopy(char **pp, char **ppPoslist){ + char *pEnd = *ppPoslist; + char c = 0; + + /* The end of a position list is marked by a zero encoded as an FTS3 + ** varint. A single POS_END (0) byte. Except, if the 0 byte is preceded by + ** a byte with the 0x80 bit set, then it is not a varint 0, but the tail + ** of some other, multi-byte, value. + ** + ** The following while-loop moves pEnd to point to the first byte that is not + ** immediately preceded by a byte with the 0x80 bit set. Then increments + ** pEnd once more so that it points to the byte immediately following the + ** last byte in the position-list. + */ + while( *pEnd | c ){ + c = *pEnd++ & 0x80; + testcase( c!=0 && (*pEnd)==0 ); + } + pEnd++; /* Advance past the POS_END terminator byte */ + + if( pp ){ + int n = (int)(pEnd - *ppPoslist); + char *p = *pp; + memcpy(p, *ppPoslist, n); + p += n; + *pp = p; + } + *ppPoslist = pEnd; +} + +/* +** When this function is called, *ppPoslist is assumed to point to the +** start of a column-list. After it returns, *ppPoslist points to the +** to the terminator (POS_COLUMN or POS_END) byte of the column-list. ** -****************************************************************************** +** A column-list is list of delta-encoded positions for a single column +** within a single document within a doclist. +** +** The column-list is terminated either by a POS_COLUMN varint (1) or +** a POS_END varint (0). This routine leaves *ppPoslist pointing to +** the POS_COLUMN or POS_END that terminates the column-list. ** +** If pp is not NULL, then the contents of the column-list are copied +** to *pp. *pp is set to point to the first byte past the last byte copied +** before this function returns. The POS_COLUMN or POS_END terminator +** is not copied into *pp. */ -#ifndef _FTSINT_H -#define _FTSINT_H +static void fts3ColumnlistCopy(char **pp, char **ppPoslist){ + char *pEnd = *ppPoslist; + char c = 0; -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif + /* A column-list is terminated by either a 0x01 or 0x00 byte that is + ** not part of a multi-byte varint. + */ + while( 0xFE & (*pEnd | c) ){ + c = *pEnd++ & 0x80; + testcase( c!=0 && ((*pEnd)&0xfe)==0 ); + } + if( pp ){ + int n = (int)(pEnd - *ppPoslist); + char *p = *pp; + memcpy(p, *ppPoslist, n); + p += n; + *pp = p; + } + *ppPoslist = pEnd; +} /* -** FTS4 is really an extension for FTS3. It is enabled using the -** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also all -** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3. +** Value used to signify the end of an position-list. This is safe because +** it is not possible to have a document with 2^31 terms. */ -#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3) -# define SQLITE_ENABLE_FTS3 -#endif +#define POSITION_LIST_END 0x7fffffff -#ifdef SQLITE_ENABLE_FTS3 -/************** Include fts3_tokenizer.h in the middle of fts3Int.h **********/ -/************** Begin file fts3_tokenizer.h **********************************/ /* -** 2006 July 10 -** -** The author disclaims copyright to this source code. -** -************************************************************************* -** Defines the interface to tokenizers used by fulltext-search. There -** are three basic components: +** This function is used to help parse position-lists. When this function is +** called, *pp may point to the start of the next varint in the position-list +** being parsed, or it may point to 1 byte past the end of the position-list +** (in which case **pp will be a terminator bytes POS_END (0) or +** (1)). ** -** sqlite3_tokenizer_module is a singleton defining the tokenizer -** interface functions. This is essentially the class structure for -** tokenizers. +** If *pp points past the end of the current position-list, set *pi to +** POSITION_LIST_END and return. Otherwise, read the next varint from *pp, +** increment the current value of *pi by the value read, and set *pp to +** point to the next value before returning. ** -** sqlite3_tokenizer is used to define a particular tokenizer, perhaps -** including customization information defined at creation time. +** Before calling this routine *pi must be initialized to the value of +** the previous position, or zero if we are reading the first position +** in the position-list. Because positions are delta-encoded, the value +** of the previous position is needed in order to compute the value of +** the next position. +*/ +static void fts3ReadNextPos( + char **pp, /* IN/OUT: Pointer into position-list buffer */ + sqlite3_int64 *pi /* IN/OUT: Value read from position-list */ +){ + if( (**pp)&0xFE ){ + fts3GetDeltaVarint(pp, pi); + *pi -= 2; + }else{ + *pi = POSITION_LIST_END; + } +} + +/* +** If parameter iCol is not 0, write an POS_COLUMN (1) byte followed by +** the value of iCol encoded as a varint to *pp. This will start a new +** column list. ** -** sqlite3_tokenizer_cursor is generated by a tokenizer to generate -** tokens from a particular input. +** Set *pp to point to the byte just after the last byte written before +** returning (do not modify it if iCol==0). Return the total number of bytes +** written (0 if iCol==0). */ -#ifndef _FTS3_TOKENIZER_H_ -#define _FTS3_TOKENIZER_H_ +static int fts3PutColNumber(char **pp, int iCol){ + int n = 0; /* Number of bytes written */ + if( iCol ){ + char *p = *pp; /* Output pointer */ + n = 1 + sqlite3Fts3PutVarint(&p[1], iCol); + *p = 0x01; + *pp = &p[n]; + } + return n; +} -/* TODO(shess) Only used for SQLITE_OK and SQLITE_DONE at this time. -** If tokenizers are to be allowed to call sqlite3_*() functions, then -** we will need a way to register the API consistently. +/* +** Compute the union of two position lists. The output written +** into *pp contains all positions of both *pp1 and *pp2 in sorted +** order and with any duplicates removed. All pointers are +** updated appropriately. The caller is responsible for insuring +** that there is enough space in *pp to hold the complete output. */ +static void fts3PoslistMerge( + char **pp, /* Output buffer */ + char **pp1, /* Left input list */ + char **pp2 /* Right input list */ +){ + char *p = *pp; + char *p1 = *pp1; + char *p2 = *pp2; + + while( *p1 || *p2 ){ + int iCol1; /* The current column index in pp1 */ + int iCol2; /* The current column index in pp2 */ + + if( *p1==POS_COLUMN ) fts3GetVarint32(&p1[1], &iCol1); + else if( *p1==POS_END ) iCol1 = POSITION_LIST_END; + else iCol1 = 0; + + if( *p2==POS_COLUMN ) fts3GetVarint32(&p2[1], &iCol2); + else if( *p2==POS_END ) iCol2 = POSITION_LIST_END; + else iCol2 = 0; + + if( iCol1==iCol2 ){ + sqlite3_int64 i1 = 0; /* Last position from pp1 */ + sqlite3_int64 i2 = 0; /* Last position from pp2 */ + sqlite3_int64 iPrev = 0; + int n = fts3PutColNumber(&p, iCol1); + p1 += n; + p2 += n; + + /* At this point, both p1 and p2 point to the start of column-lists + ** for the same column (the column with index iCol1 and iCol2). + ** A column-list is a list of non-negative delta-encoded varints, each + ** incremented by 2 before being stored. Each list is terminated by a + ** POS_END (0) or POS_COLUMN (1). The following block merges the two lists + ** and writes the results to buffer p. p is left pointing to the byte + ** after the list written. No terminator (POS_END or POS_COLUMN) is + ** written to the output. + */ + fts3GetDeltaVarint(&p1, &i1); + fts3GetDeltaVarint(&p2, &i2); + do { + fts3PutDeltaVarint(&p, &iPrev, (i1pos(*pp1) && pos(*pp2)-pos(*pp1)<=nToken). i.e. +** when the *pp1 token appears before the *pp2 token, but not more than nToken +** slots before it. +** +** e.g. nToken==1 searches for adjacent positions. */ -typedef struct sqlite3_tokenizer_module sqlite3_tokenizer_module; -typedef struct sqlite3_tokenizer sqlite3_tokenizer; -typedef struct sqlite3_tokenizer_cursor sqlite3_tokenizer_cursor; - -struct sqlite3_tokenizer_module { +static int fts3PoslistPhraseMerge( + char **pp, /* IN/OUT: Preallocated output buffer */ + int nToken, /* Maximum difference in token positions */ + int isSaveLeft, /* Save the left position */ + int isExact, /* If *pp1 is exactly nTokens before *pp2 */ + char **pp1, /* IN/OUT: Left input list */ + char **pp2 /* IN/OUT: Right input list */ +){ + char *p = *pp; + char *p1 = *pp1; + char *p2 = *pp2; + int iCol1 = 0; + int iCol2 = 0; - /* - ** Structure version. Should always be set to 0. - */ - int iVersion; + /* Never set both isSaveLeft and isExact for the same invocation. */ + assert( isSaveLeft==0 || isExact==0 ); - /* - ** Create a new tokenizer. The values in the argv[] array are the - ** arguments passed to the "tokenizer" clause of the CREATE VIRTUAL - ** TABLE statement that created the fts3 table. For example, if - ** the following SQL is executed: - ** - ** CREATE .. USING fts3( ... , tokenizer arg1 arg2) - ** - ** then argc is set to 2, and the argv[] array contains pointers - ** to the strings "arg1" and "arg2". - ** - ** This method should return either SQLITE_OK (0), or an SQLite error - ** code. If SQLITE_OK is returned, then *ppTokenizer should be set - ** to point at the newly created tokenizer structure. The generic - ** sqlite3_tokenizer.pModule variable should not be initialised by - ** this callback. The caller will do so. - */ - int (*xCreate)( - int argc, /* Size of argv array */ - const char *const*argv, /* Tokenizer argument strings */ - sqlite3_tokenizer **ppTokenizer /* OUT: Created tokenizer */ - ); + assert( p!=0 && *p1!=0 && *p2!=0 ); + if( *p1==POS_COLUMN ){ + p1++; + p1 += fts3GetVarint32(p1, &iCol1); + } + if( *p2==POS_COLUMN ){ + p2++; + p2 += fts3GetVarint32(p2, &iCol2); + } - /* - ** Destroy an existing tokenizer. The fts3 module calls this method - ** exactly once for each successful call to xCreate(). - */ - int (*xDestroy)(sqlite3_tokenizer *pTokenizer); + while( 1 ){ + if( iCol1==iCol2 ){ + char *pSave = p; + sqlite3_int64 iPrev = 0; + sqlite3_int64 iPos1 = 0; + sqlite3_int64 iPos2 = 0; - /* - ** Create a tokenizer cursor to tokenize an input buffer. The caller - ** is responsible for ensuring that the input buffer remains valid - ** until the cursor is closed (using the xClose() method). - */ - int (*xOpen)( - sqlite3_tokenizer *pTokenizer, /* Tokenizer object */ - const char *pInput, int nBytes, /* Input buffer */ - sqlite3_tokenizer_cursor **ppCursor /* OUT: Created tokenizer cursor */ - ); + if( iCol1 ){ + *p++ = POS_COLUMN; + p += sqlite3Fts3PutVarint(p, iCol1); + } - /* - ** Destroy an existing tokenizer cursor. The fts3 module calls this - ** method exactly once for each successful call to xOpen(). - */ - int (*xClose)(sqlite3_tokenizer_cursor *pCursor); + assert( *p1!=POS_END && *p1!=POS_COLUMN ); + assert( *p2!=POS_END && *p2!=POS_COLUMN ); + fts3GetDeltaVarint(&p1, &iPos1); iPos1 -= 2; + fts3GetDeltaVarint(&p2, &iPos2); iPos2 -= 2; - /* - ** Retrieve the next token from the tokenizer cursor pCursor. This - ** method should either return SQLITE_OK and set the values of the - ** "OUT" variables identified below, or SQLITE_DONE to indicate that - ** the end of the buffer has been reached, or an SQLite error code. - ** - ** *ppToken should be set to point at a buffer containing the - ** normalized version of the token (i.e. after any case-folding and/or - ** stemming has been performed). *pnBytes should be set to the length - ** of this buffer in bytes. The input text that generated the token is - ** identified by the byte offsets returned in *piStartOffset and - ** *piEndOffset. *piStartOffset should be set to the index of the first - ** byte of the token in the input buffer. *piEndOffset should be set - ** to the index of the first byte just past the end of the token in - ** the input buffer. - ** - ** The buffer *ppToken is set to point at is managed by the tokenizer - ** implementation. It is only required to be valid until the next call - ** to xNext() or xClose(). - */ - /* TODO(shess) current implementation requires pInput to be - ** nul-terminated. This should either be fixed, or pInput/nBytes - ** should be converted to zInput. - */ - int (*xNext)( - sqlite3_tokenizer_cursor *pCursor, /* Tokenizer cursor */ - const char **ppToken, int *pnBytes, /* OUT: Normalized text for token */ - int *piStartOffset, /* OUT: Byte offset of token in input buffer */ - int *piEndOffset, /* OUT: Byte offset of end of token in input buffer */ - int *piPosition /* OUT: Number of tokens returned before this one */ - ); -}; + while( 1 ){ + if( iPos2==iPos1+nToken + || (isExact==0 && iPos2>iPos1 && iPos2<=iPos1+nToken) + ){ + sqlite3_int64 iSave; + iSave = isSaveLeft ? iPos1 : iPos2; + fts3PutDeltaVarint(&p, &iPrev, iSave+2); iPrev -= 2; + pSave = 0; + assert( p ); + } + if( (!isSaveLeft && iPos2<=(iPos1+nToken)) || iPos2<=iPos1 ){ + if( (*p2&0xFE)==0 ) break; + fts3GetDeltaVarint(&p2, &iPos2); iPos2 -= 2; + }else{ + if( (*p1&0xFE)==0 ) break; + fts3GetDeltaVarint(&p1, &iPos1); iPos1 -= 2; + } + } -struct sqlite3_tokenizer { - const sqlite3_tokenizer_module *pModule; /* The module for this tokenizer */ - /* Tokenizer implementations will typically add additional fields */ -}; + if( pSave ){ + assert( pp && p ); + p = pSave; + } -struct sqlite3_tokenizer_cursor { - sqlite3_tokenizer *pTokenizer; /* Tokenizer for this cursor. */ - /* Tokenizer implementations will typically add additional fields */ -}; + fts3ColumnlistCopy(0, &p1); + fts3ColumnlistCopy(0, &p2); + assert( (*p1&0xFE)==0 && (*p2&0xFE)==0 ); + if( 0==*p1 || 0==*p2 ) break; -int fts3_global_term_cnt(int iTerm, int iCol); -int fts3_term_cnt(int iTerm, int iCol); + p1++; + p1 += fts3GetVarint32(p1, &iCol1); + p2++; + p2 += fts3GetVarint32(p2, &iCol2); + } + /* Advance pointer p1 or p2 (whichever corresponds to the smaller of + ** iCol1 and iCol2) so that it points to either the 0x00 that marks the + ** end of the position list, or the 0x01 that precedes the next + ** column-number in the position list. + */ + else if( iCol1=pEnd ){ + *pp = 0; + }else{ + sqlite3_int64 iVal; + *pp += sqlite3Fts3GetVarint(*pp, &iVal); + if( bDescIdx ){ + *pVal -= iVal; + }else{ + *pVal += iVal; + } + } +} /* -** There are 2 different modes of operation for a hash table: +** This function is used to write a single varint to a buffer. The varint +** is written to *pp. Before returning, *pp is set to point 1 byte past the +** end of the value written. ** -** FTS3_HASH_STRING pKey points to a string that is nKey bytes long -** (including the null-terminator, if any). Case -** is respected in comparisons. +** If *pbFirst is zero when this function is called, the value written to +** the buffer is that of parameter iVal. ** -** FTS3_HASH_BINARY pKey points to binary data nKey bytes long. -** memcmp() is used to compare keys. +** If *pbFirst is non-zero when this function is called, then the value +** written is either (iVal-*piPrev) (if bDescIdx is zero) or (*piPrev-iVal) +** (if bDescIdx is non-zero). ** -** A copy of the key is made if the copyKey parameter to fts3HashInit is 1. +** Before returning, this function always sets *pbFirst to 1 and *piPrev +** to the value of parameter iVal. */ -#define FTS3_HASH_STRING 1 -#define FTS3_HASH_BINARY 2 +static void fts3PutDeltaVarint3( + char **pp, /* IN/OUT: Output pointer */ + int bDescIdx, /* True for descending docids */ + sqlite3_int64 *piPrev, /* IN/OUT: Previous value written to list */ + int *pbFirst, /* IN/OUT: True after first int written */ + sqlite3_int64 iVal /* Write this value to the list */ +){ + sqlite3_int64 iWrite; + if( bDescIdx==0 || *pbFirst==0 ){ + iWrite = iVal - *piPrev; + }else{ + iWrite = *piPrev - iVal; + } + assert( *pbFirst || *piPrev==0 ); + assert( *pbFirst==0 || iWrite>0 ); + *pp += sqlite3Fts3PutVarint(*pp, iWrite); + *piPrev = iVal; + *pbFirst = 1; +} -/* -** Access routines. To delete, insert a NULL pointer. -*/ -SQLITE_PRIVATE void sqlite3Fts3HashInit(Fts3Hash *pNew, char keyClass, char copyKey); -SQLITE_PRIVATE void *sqlite3Fts3HashInsert(Fts3Hash*, const void *pKey, int nKey, void *pData); -SQLITE_PRIVATE void *sqlite3Fts3HashFind(const Fts3Hash*, const void *pKey, int nKey); -SQLITE_PRIVATE void sqlite3Fts3HashClear(Fts3Hash*); -SQLITE_PRIVATE Fts3HashElem *sqlite3Fts3HashFindElem(const Fts3Hash *, const void *, int); /* -** Shorthand for the functions above +** This macro is used by various functions that merge doclists. The two +** arguments are 64-bit docid values. If the value of the stack variable +** bDescDoclist is 0 when this macro is invoked, then it returns (i1-i2). +** Otherwise, (i2-i1). +** +** Using this makes it easier to write code that can merge doclists that are +** sorted in either ascending or descending order. */ -#define fts3HashInit sqlite3Fts3HashInit -#define fts3HashInsert sqlite3Fts3HashInsert -#define fts3HashFind sqlite3Fts3HashFind -#define fts3HashClear sqlite3Fts3HashClear -#define fts3HashFindElem sqlite3Fts3HashFindElem +#define DOCID_CMP(i1, i2) ((bDescDoclist?-1:1) * (i1-i2)) /* -** Macros for looping over all elements of a hash table. The idiom is -** like this: +** This function does an "OR" merge of two doclists (output contains all +** positions contained in either argument doclist). If the docids in the +** input doclists are sorted in ascending order, parameter bDescDoclist +** should be false. If they are sorted in ascending order, it should be +** passed a non-zero value. ** -** Fts3Hash h; -** Fts3HashElem *p; -** ... -** for(p=fts3HashFirst(&h); p; p=fts3HashNext(p)){ -** SomeStructure *pData = fts3HashData(p); -** // do something with pData -** } +** If no error occurs, *paOut is set to point at an sqlite3_malloc'd buffer +** containing the output doclist and SQLITE_OK is returned. In this case +** *pnOut is set to the number of bytes in the output doclist. +** +** If an error occurs, an SQLite error code is returned. The output values +** are undefined in this case. */ -#define fts3HashFirst(H) ((H)->first) -#define fts3HashNext(E) ((E)->next) -#define fts3HashData(E) ((E)->data) -#define fts3HashKey(E) ((E)->pKey) -#define fts3HashKeysize(E) ((E)->nKey) +static int fts3DoclistOrMerge( + int bDescDoclist, /* True if arguments are desc */ + char *a1, int n1, /* First doclist */ + char *a2, int n2, /* Second doclist */ + char **paOut, int *pnOut /* OUT: Malloc'd doclist */ +){ + sqlite3_int64 i1 = 0; + sqlite3_int64 i2 = 0; + sqlite3_int64 iPrev = 0; + char *pEnd1 = &a1[n1]; + char *pEnd2 = &a2[n2]; + char *p1 = a1; + char *p2 = a2; + char *p; + char *aOut; + int bFirstOut = 0; -/* -** Number of entries in a hash table -*/ -#define fts3HashCount(H) ((H)->count) + *paOut = 0; + *pnOut = 0; -#endif /* _FTS3_HASH_H_ */ + /* Allocate space for the output. Both the input and output doclists + ** are delta encoded. If they are in ascending order (bDescDoclist==0), + ** then the first docid in each list is simply encoded as a varint. For + ** each subsequent docid, the varint stored is the difference between the + ** current and previous docid (a positive number - since the list is in + ** ascending order). + ** + ** The first docid written to the output is therefore encoded using the + ** same number of bytes as it is in whichever of the input lists it is + ** read from. And each subsequent docid read from the same input list + ** consumes either the same or less bytes as it did in the input (since + ** the difference between it and the previous value in the output must + ** be a positive value less than or equal to the delta value read from + ** the input list). The same argument applies to all but the first docid + ** read from the 'other' list. And to the contents of all position lists + ** that will be copied and merged from the input to the output. + ** + ** However, if the first docid copied to the output is a negative number, + ** then the encoding of the first docid from the 'other' input list may + ** be larger in the output than it was in the input (since the delta value + ** may be a larger positive integer than the actual docid). + ** + ** The space required to store the output is therefore the sum of the + ** sizes of the two inputs, plus enough space for exactly one of the input + ** docids to grow. + ** + ** A symetric argument may be made if the doclists are in descending + ** order. + */ + aOut = sqlite3_malloc(n1+n2+FTS3_VARINT_MAX-1); + if( !aOut ) return SQLITE_NOMEM; -/************** End of fts3_hash.h *******************************************/ -/************** Continuing where we left off in fts3Int.h ********************/ + p = aOut; + fts3GetDeltaVarint3(&p1, pEnd1, 0, &i1); + fts3GetDeltaVarint3(&p2, pEnd2, 0, &i2); + while( p1 || p2 ){ + sqlite3_int64 iDiff = DOCID_CMP(i1, i2); -/* -** This constant controls how often segments are merged. Once there are -** FTS3_MERGE_COUNT segments of level N, they are merged into a single -** segment of level N+1. -*/ -#define FTS3_MERGE_COUNT 16 + if( p2 && p1 && iDiff==0 ){ + fts3PutDeltaVarint3(&p, bDescDoclist, &iPrev, &bFirstOut, i1); + fts3PoslistMerge(&p, &p1, &p2); + fts3GetDeltaVarint3(&p1, pEnd1, bDescDoclist, &i1); + fts3GetDeltaVarint3(&p2, pEnd2, bDescDoclist, &i2); + }else if( !p2 || (p1 && iDiff<0) ){ + fts3PutDeltaVarint3(&p, bDescDoclist, &iPrev, &bFirstOut, i1); + fts3PoslistCopy(&p, &p1); + fts3GetDeltaVarint3(&p1, pEnd1, bDescDoclist, &i1); + }else{ + fts3PutDeltaVarint3(&p, bDescDoclist, &iPrev, &bFirstOut, i2); + fts3PoslistCopy(&p, &p2); + fts3GetDeltaVarint3(&p2, pEnd2, bDescDoclist, &i2); + } + } + + *paOut = aOut; + *pnOut = (int)(p-aOut); + assert( *pnOut<=n1+n2+FTS3_VARINT_MAX-1 ); + return SQLITE_OK; +} /* -** This is the maximum amount of data (in bytes) to store in the -** Fts3Table.pendingTerms hash table. Normally, the hash table is -** populated as documents are inserted/updated/deleted in a transaction -** and used to create a new segment when the transaction is committed. -** However if this limit is reached midway through a transaction, a new -** segment is created and the hash table cleared immediately. +** This function does a "phrase" merge of two doclists. In a phrase merge, +** the output contains a copy of each position from the right-hand input +** doclist for which there is a position in the left-hand input doclist +** exactly nDist tokens before it. +** +** If the docids in the input doclists are sorted in ascending order, +** parameter bDescDoclist should be false. If they are sorted in ascending +** order, it should be passed a non-zero value. +** +** The right-hand input doclist is overwritten by this function. */ -#define FTS3_MAX_PENDING_DATA (1*1024*1024) +static void fts3DoclistPhraseMerge( + int bDescDoclist, /* True if arguments are desc */ + int nDist, /* Distance from left to right (1=adjacent) */ + char *aLeft, int nLeft, /* Left doclist */ + char *aRight, int *pnRight /* IN/OUT: Right/output doclist */ +){ + sqlite3_int64 i1 = 0; + sqlite3_int64 i2 = 0; + sqlite3_int64 iPrev = 0; + char *pEnd1 = &aLeft[nLeft]; + char *pEnd2 = &aRight[*pnRight]; + char *p1 = aLeft; + char *p2 = aRight; + char *p; + int bFirstOut = 0; + char *aOut = aRight; + + assert( nDist>0 ); + + p = aOut; + fts3GetDeltaVarint3(&p1, pEnd1, 0, &i1); + fts3GetDeltaVarint3(&p2, pEnd2, 0, &i2); + + while( p1 && p2 ){ + sqlite3_int64 iDiff = DOCID_CMP(i1, i2); + if( iDiff==0 ){ + char *pSave = p; + sqlite3_int64 iPrevSave = iPrev; + int bFirstOutSave = bFirstOut; + + fts3PutDeltaVarint3(&p, bDescDoclist, &iPrev, &bFirstOut, i1); + if( 0==fts3PoslistPhraseMerge(&p, nDist, 0, 1, &p1, &p2) ){ + p = pSave; + iPrev = iPrevSave; + bFirstOut = bFirstOutSave; + } + fts3GetDeltaVarint3(&p1, pEnd1, bDescDoclist, &i1); + fts3GetDeltaVarint3(&p2, pEnd2, bDescDoclist, &i2); + }else if( iDiff<0 ){ + fts3PoslistCopy(0, &p1); + fts3GetDeltaVarint3(&p1, pEnd1, bDescDoclist, &i1); + }else{ + fts3PoslistCopy(0, &p2); + fts3GetDeltaVarint3(&p2, pEnd2, bDescDoclist, &i2); + } + } + + *pnRight = (int)(p - aOut); +} /* -** Macro to return the number of elements in an array. SQLite has a -** similar macro called ArraySize(). Use a different name to avoid -** a collision when building an amalgamation with built-in FTS3. +** Argument pList points to a position list nList bytes in size. This +** function checks to see if the position list contains any entries for +** a token in position 0 (of any column). If so, it writes argument iDelta +** to the output buffer pOut, followed by a position list consisting only +** of the entries from pList at position 0, and terminated by an 0x00 byte. +** The value returned is the number of bytes written to pOut (if any). */ -#define SizeofArray(X) ((int)(sizeof(X)/sizeof(X[0]))) +SQLITE_PRIVATE int sqlite3Fts3FirstFilter( + sqlite3_int64 iDelta, /* Varint that may be written to pOut */ + char *pList, /* Position list (no 0x00 term) */ + int nList, /* Size of pList in bytes */ + char *pOut /* Write output here */ +){ + int nOut = 0; + int bWritten = 0; /* True once iDelta has been written */ + char *p = pList; + char *pEnd = &pList[nList]; + if( *p!=0x01 ){ + if( *p==0x02 ){ + nOut += sqlite3Fts3PutVarint(&pOut[nOut], iDelta); + pOut[nOut++] = 0x02; + bWritten = 1; + } + fts3ColumnlistCopy(0, &p); + } + + while( paaOutput); i++){ + if( pTS->aaOutput[i] ){ + if( !aOut ){ + aOut = pTS->aaOutput[i]; + nOut = pTS->anOutput[i]; + pTS->aaOutput[i] = 0; + }else{ + int nNew; + char *aNew; + + int rc = fts3DoclistOrMerge(p->bDescIdx, + pTS->aaOutput[i], pTS->anOutput[i], aOut, nOut, &aNew, &nNew + ); + if( rc!=SQLITE_OK ){ + sqlite3_free(aOut); + return rc; + } + + sqlite3_free(pTS->aaOutput[i]); + sqlite3_free(aOut); + pTS->aaOutput[i] = 0; + aOut = aNew; + nOut = nNew; + } + } + } + + pTS->aaOutput[0] = aOut; + pTS->anOutput[0] = nOut; + return SQLITE_OK; +} /* -** FTS4 virtual tables may maintain multiple indexes - one index of all terms -** in the document set and zero or more prefix indexes. All indexes are stored -** as one or more b+-trees in the %_segments and %_segdir tables. +** Merge the doclist aDoclist/nDoclist into the TermSelect object passed +** as the first argument. The merge is an "OR" merge (see function +** fts3DoclistOrMerge() for details). ** -** It is possible to determine which index a b+-tree belongs to based on the -** value stored in the "%_segdir.level" column. Given this value L, the index -** that the b+-tree belongs to is (L<<10). In other words, all b+-trees with -** level values between 0 and 1023 (inclusive) belong to index 0, all levels -** between 1024 and 2047 to index 1, and so on. +** This function is called with the doclist for each term that matches +** a queried prefix. It merges all these doclists into one, the doclist +** for the specified prefix. Since there can be a very large number of +** doclists to merge, the merging is done pair-wise using the TermSelect +** object. ** -** It is considered impossible for an index to use more than 1024 levels. In -** theory though this may happen, but only after at least -** (FTS3_MERGE_COUNT^1024) separate flushes of the pending-terms tables. +** This function returns SQLITE_OK if the merge is successful, or an +** SQLite error code (SQLITE_NOMEM) if an error occurs. */ -#define FTS3_SEGDIR_MAXLEVEL 1024 -#define FTS3_SEGDIR_MAXLEVEL_STR "1024" +static int fts3TermSelectMerge( + Fts3Table *p, /* FTS table handle */ + TermSelect *pTS, /* TermSelect object to merge into */ + char *aDoclist, /* Pointer to doclist */ + int nDoclist /* Size of aDoclist in bytes */ +){ + if( pTS->aaOutput[0]==0 ){ + /* If this is the first term selected, copy the doclist to the output + ** buffer using memcpy(). */ + pTS->aaOutput[0] = sqlite3_malloc(nDoclist); + pTS->anOutput[0] = nDoclist; + if( pTS->aaOutput[0] ){ + memcpy(pTS->aaOutput[0], aDoclist, nDoclist); + }else{ + return SQLITE_NOMEM; + } + }else{ + char *aMerge = aDoclist; + int nMerge = nDoclist; + int iOut; -/* -** The testcase() macro is only used by the amalgamation. If undefined, -** make it a no-op. -*/ -#ifndef testcase -# define testcase(X) -#endif + for(iOut=0; iOutaaOutput); iOut++){ + if( pTS->aaOutput[iOut]==0 ){ + assert( iOut>0 ); + pTS->aaOutput[iOut] = aMerge; + pTS->anOutput[iOut] = nMerge; + break; + }else{ + char *aNew; + int nNew; + + int rc = fts3DoclistOrMerge(p->bDescIdx, aMerge, nMerge, + pTS->aaOutput[iOut], pTS->anOutput[iOut], &aNew, &nNew + ); + if( rc!=SQLITE_OK ){ + if( aMerge!=aDoclist ) sqlite3_free(aMerge); + return rc; + } + + if( aMerge!=aDoclist ) sqlite3_free(aMerge); + sqlite3_free(pTS->aaOutput[iOut]); + pTS->aaOutput[iOut] = 0; + + aMerge = aNew; + nMerge = nNew; + if( (iOut+1)==SizeofArray(pTS->aaOutput) ){ + pTS->aaOutput[iOut] = aMerge; + pTS->anOutput[iOut] = nMerge; + } + } + } + } + return SQLITE_OK; +} /* -** Terminator values for position-lists and column-lists. +** Append SegReader object pNew to the end of the pCsr->apSegment[] array. */ -#define POS_COLUMN (1) /* Column-list terminator */ -#define POS_END (0) /* Position-list terminator */ +static int fts3SegReaderCursorAppend( + Fts3MultiSegReader *pCsr, + Fts3SegReader *pNew +){ + if( (pCsr->nSegment%16)==0 ){ + Fts3SegReader **apNew; + int nByte = (pCsr->nSegment + 16)*sizeof(Fts3SegReader*); + apNew = (Fts3SegReader **)sqlite3_realloc(pCsr->apSegment, nByte); + if( !apNew ){ + sqlite3Fts3SegReaderFree(pNew); + return SQLITE_NOMEM; + } + pCsr->apSegment = apNew; + } + pCsr->apSegment[pCsr->nSegment++] = pNew; + return SQLITE_OK; +} /* -** This section provides definitions to allow the -** FTS3 extension to be compiled outside of the -** amalgamation. +** Add seg-reader objects to the Fts3MultiSegReader object passed as the +** 8th argument. +** +** This function returns SQLITE_OK if successful, or an SQLite error code +** otherwise. */ -#ifndef SQLITE_AMALGAMATION +static int fts3SegReaderCursor( + Fts3Table *p, /* FTS3 table handle */ + int iLangid, /* Language id */ + int iIndex, /* Index to search (from 0 to p->nIndex-1) */ + int iLevel, /* Level of segments to scan */ + const char *zTerm, /* Term to query for */ + int nTerm, /* Size of zTerm in bytes */ + int isPrefix, /* True for a prefix search */ + int isScan, /* True to scan from zTerm to EOF */ + Fts3MultiSegReader *pCsr /* Cursor object to populate */ +){ + int rc = SQLITE_OK; /* Error code */ + sqlite3_stmt *pStmt = 0; /* Statement to iterate through segments */ + int rc2; /* Result of sqlite3_reset() */ + + /* If iLevel is less than 0 and this is not a scan, include a seg-reader + ** for the pending-terms. If this is a scan, then this call must be being + ** made by an fts4aux module, not an FTS table. In this case calling + ** Fts3SegReaderPending might segfault, as the data structures used by + ** fts4aux are not completely populated. So it's easiest to filter these + ** calls out here. */ + if( iLevel<0 && p->aIndex ){ + Fts3SegReader *pSeg = 0; + rc = sqlite3Fts3SegReaderPending(p, iIndex, zTerm, nTerm, isPrefix, &pSeg); + if( rc==SQLITE_OK && pSeg ){ + rc = fts3SegReaderCursorAppend(pCsr, pSeg); + } + } + + if( iLevel!=FTS3_SEGCURSOR_PENDING ){ + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3AllSegdirs(p, iLangid, iIndex, iLevel, &pStmt); + } + + while( rc==SQLITE_OK && SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){ + Fts3SegReader *pSeg = 0; + + /* Read the values returned by the SELECT into local variables. */ + sqlite3_int64 iStartBlock = sqlite3_column_int64(pStmt, 1); + sqlite3_int64 iLeavesEndBlock = sqlite3_column_int64(pStmt, 2); + sqlite3_int64 iEndBlock = sqlite3_column_int64(pStmt, 3); + int nRoot = sqlite3_column_bytes(pStmt, 4); + char const *zRoot = sqlite3_column_blob(pStmt, 4); + + /* If zTerm is not NULL, and this segment is not stored entirely on its + ** root node, the range of leaves scanned can be reduced. Do this. */ + if( iStartBlock && zTerm ){ + sqlite3_int64 *pi = (isPrefix ? &iLeavesEndBlock : 0); + rc = fts3SelectLeaf(p, zTerm, nTerm, zRoot, nRoot, &iStartBlock, pi); + if( rc!=SQLITE_OK ) goto finished; + if( isPrefix==0 && isScan==0 ) iLeavesEndBlock = iStartBlock; + } + + rc = sqlite3Fts3SegReaderNew(pCsr->nSegment+1, + (isPrefix==0 && isScan==0), + iStartBlock, iLeavesEndBlock, + iEndBlock, zRoot, nRoot, &pSeg + ); + if( rc!=SQLITE_OK ) goto finished; + rc = fts3SegReaderCursorAppend(pCsr, pSeg); + } + } + + finished: + rc2 = sqlite3_reset(pStmt); + if( rc==SQLITE_DONE ) rc = rc2; + + return rc; +} + /* -** Macros indicating that conditional expressions are always true or -** false. +** Set up a cursor object for iterating through a full-text index or a +** single level therein. */ -#ifdef SQLITE_COVERAGE_TEST -# define ALWAYS(x) (1) -# define NEVER(X) (0) -#else -# define ALWAYS(x) (x) -# define NEVER(X) (x) -#endif +SQLITE_PRIVATE int sqlite3Fts3SegReaderCursor( + Fts3Table *p, /* FTS3 table handle */ + int iLangid, /* Language-id to search */ + int iIndex, /* Index to search (from 0 to p->nIndex-1) */ + int iLevel, /* Level of segments to scan */ + const char *zTerm, /* Term to query for */ + int nTerm, /* Size of zTerm in bytes */ + int isPrefix, /* True for a prefix search */ + int isScan, /* True to scan from zTerm to EOF */ + Fts3MultiSegReader *pCsr /* Cursor object to populate */ +){ + assert( iIndex>=0 && iIndexnIndex ); + assert( iLevel==FTS3_SEGCURSOR_ALL + || iLevel==FTS3_SEGCURSOR_PENDING + || iLevel>=0 + ); + assert( iLevelbase.pVtab; -#endif /* SQLITE_AMALGAMATION */ + if( isPrefix ){ + for(i=1; bFound==0 && inIndex; i++){ + if( p->aIndex[i].nPrefix==nTerm ){ + bFound = 1; + rc = sqlite3Fts3SegReaderCursor(p, pCsr->iLangid, + i, FTS3_SEGCURSOR_ALL, zTerm, nTerm, 0, 0, pSegcsr + ); + pSegcsr->bLookup = 1; + } + } -typedef struct Fts3Table Fts3Table; -typedef struct Fts3Cursor Fts3Cursor; -typedef struct Fts3Expr Fts3Expr; -typedef struct Fts3Phrase Fts3Phrase; -typedef struct Fts3PhraseToken Fts3PhraseToken; + for(i=1; bFound==0 && inIndex; i++){ + if( p->aIndex[i].nPrefix==nTerm+1 ){ + bFound = 1; + rc = sqlite3Fts3SegReaderCursor(p, pCsr->iLangid, + i, FTS3_SEGCURSOR_ALL, zTerm, nTerm, 1, 0, pSegcsr + ); + if( rc==SQLITE_OK ){ + rc = fts3SegReaderCursorAddZero( + p, pCsr->iLangid, zTerm, nTerm, pSegcsr + ); + } + } + } + } -typedef struct Fts3Doclist Fts3Doclist; -typedef struct Fts3SegFilter Fts3SegFilter; -typedef struct Fts3DeferredToken Fts3DeferredToken; -typedef struct Fts3SegReader Fts3SegReader; -typedef struct Fts3MultiSegReader Fts3MultiSegReader; + if( bFound==0 ){ + rc = sqlite3Fts3SegReaderCursor(p, pCsr->iLangid, + 0, FTS3_SEGCURSOR_ALL, zTerm, nTerm, isPrefix, 0, pSegcsr + ); + pSegcsr->bLookup = !isPrefix; + } + } + + *ppSegcsr = pSegcsr; + return rc; +} /* -** A connection to a fulltext index is an instance of the following -** structure. The xCreate and xConnect methods create an instance -** of this structure and xDestroy and xDisconnect free that instance. -** All other methods receive a pointer to the structure as one of their -** arguments. +** Free an Fts3MultiSegReader allocated by fts3TermSegReaderCursor(). */ -struct Fts3Table { - sqlite3_vtab base; /* Base class used by SQLite core */ - sqlite3 *db; /* The database connection */ - const char *zDb; /* logical database name */ - const char *zName; /* virtual table name */ - int nColumn; /* number of named columns in virtual table */ - char **azColumn; /* column names. malloced */ - sqlite3_tokenizer *pTokenizer; /* tokenizer for inserts and queries */ - - /* Precompiled statements used by the implementation. Each of these - ** statements is run and reset within a single virtual table API call. - */ - sqlite3_stmt *aStmt[27]; - - char *zReadExprlist; - char *zWriteExprlist; +static void fts3SegReaderCursorFree(Fts3MultiSegReader *pSegcsr){ + sqlite3Fts3SegReaderFinish(pSegcsr); + sqlite3_free(pSegcsr); +} - int nNodeSize; /* Soft limit for node size */ - u8 bHasStat; /* True if %_stat table exists */ - u8 bHasDocsize; /* True if %_docsize table exists */ - u8 bDescIdx; /* True if doclists are in reverse order */ - int nPgsz; /* Page size for host database */ - char *zSegmentsTbl; /* Name of %_segments table */ - sqlite3_blob *pSegments; /* Blob handle open on %_segments table */ +/* +** This function retrieves the doclist for the specified term (or term +** prefix) from the database. +*/ +static int fts3TermSelect( + Fts3Table *p, /* Virtual table handle */ + Fts3PhraseToken *pTok, /* Token to query for */ + int iColumn, /* Column to query (or -ve for all columns) */ + int *pnOut, /* OUT: Size of buffer at *ppOut */ + char **ppOut /* OUT: Malloced result buffer */ +){ + int rc; /* Return code */ + Fts3MultiSegReader *pSegcsr; /* Seg-reader cursor for this term */ + TermSelect tsc; /* Object for pair-wise doclist merging */ + Fts3SegFilter filter; /* Segment term filter configuration */ - /* TODO: Fix the first paragraph of this comment. - ** - ** The following hash table is used to buffer pending index updates during - ** transactions. Variable nPendingData estimates the memory size of the - ** pending data, including hash table overhead, but not malloc overhead. - ** When nPendingData exceeds nMaxPendingData, the buffer is flushed - ** automatically. Variable iPrevDocid is the docid of the most recently - ** inserted record. - ** - ** A single FTS4 table may have multiple full-text indexes. For each index - ** there is an entry in the aIndex[] array. Index 0 is an index of all the - ** terms that appear in the document set. Each subsequent index in aIndex[] - ** is an index of prefixes of a specific length. - */ - int nIndex; /* Size of aIndex[] */ - struct Fts3Index { - int nPrefix; /* Prefix length (0 for main terms index) */ - Fts3Hash hPending; /* Pending terms table for this index */ - } *aIndex; - int nMaxPendingData; /* Max pending data before flush to disk */ - int nPendingData; /* Current bytes of pending data */ - sqlite_int64 iPrevDocid; /* Docid of most recently inserted document */ + pSegcsr = pTok->pSegcsr; + memset(&tsc, 0, sizeof(TermSelect)); -#if defined(SQLITE_DEBUG) - /* State variables used for validating that the transaction control - ** methods of the virtual table are called at appropriate times. These - ** values do not contribution to the FTS computation; they are used for - ** verifying the SQLite core. - */ - int inTransaction; /* True after xBegin but before xCommit/xRollback */ - int mxSavepoint; /* Largest valid xSavepoint integer */ -#endif -}; + filter.flags = FTS3_SEGMENT_IGNORE_EMPTY | FTS3_SEGMENT_REQUIRE_POS + | (pTok->isPrefix ? FTS3_SEGMENT_PREFIX : 0) + | (pTok->bFirst ? FTS3_SEGMENT_FIRST : 0) + | (iColumnnColumn ? FTS3_SEGMENT_COLUMN_FILTER : 0); + filter.iCol = iColumn; + filter.zTerm = pTok->z; + filter.nTerm = pTok->n; -/* -** When the core wants to read from the virtual table, it creates a -** virtual table cursor (an instance of the following structure) using -** the xOpen method. Cursors are destroyed using the xClose method. -*/ -struct Fts3Cursor { - sqlite3_vtab_cursor base; /* Base class used by SQLite core */ - i16 eSearch; /* Search strategy (see below) */ - u8 isEof; /* True if at End Of Results */ - u8 isRequireSeek; /* True if must seek pStmt to %_content row */ - sqlite3_stmt *pStmt; /* Prepared statement in use by the cursor */ - Fts3Expr *pExpr; /* Parsed MATCH query string */ - int nPhrase; /* Number of matchable phrases in query */ - Fts3DeferredToken *pDeferred; /* Deferred search tokens, if any */ - sqlite3_int64 iPrevId; /* Previous id read from aDoclist */ - char *pNextId; /* Pointer into the body of aDoclist */ - char *aDoclist; /* List of docids for full-text queries */ - int nDoclist; /* Size of buffer at aDoclist */ - u8 bDesc; /* True to sort in descending order */ - int eEvalmode; /* An FTS3_EVAL_XX constant */ - int nRowAvg; /* Average size of database rows, in pages */ - sqlite3_int64 nDoc; /* Documents in table */ + rc = sqlite3Fts3SegReaderStart(p, pSegcsr, &filter); + while( SQLITE_OK==rc + && SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, pSegcsr)) + ){ + rc = fts3TermSelectMerge(p, &tsc, pSegcsr->aDoclist, pSegcsr->nDoclist); + } - int isMatchinfoNeeded; /* True when aMatchinfo[] needs filling in */ - u32 *aMatchinfo; /* Information about most recent match */ - int nMatchinfo; /* Number of elements in aMatchinfo[] */ - char *zMatchinfo; /* Matchinfo specification */ -}; + if( rc==SQLITE_OK ){ + rc = fts3TermSelectFinishMerge(p, &tsc); + } + if( rc==SQLITE_OK ){ + *ppOut = tsc.aaOutput[0]; + *pnOut = tsc.anOutput[0]; + }else{ + int i; + for(i=0; ipSegcsr = 0; + return rc; +} /* -** The Fts3Cursor.eSearch member is always set to one of the following. -** Actualy, Fts3Cursor.eSearch can be greater than or equal to -** FTS3_FULLTEXT_SEARCH. If so, then Fts3Cursor.eSearch - 2 is the index -** of the column to be searched. For example, in +** This function counts the total number of docids in the doclist stored +** in buffer aList[], size nList bytes. ** -** CREATE VIRTUAL TABLE ex1 USING fts3(a,b,c,d); -** SELECT docid FROM ex1 WHERE b MATCH 'one two three'; -** -** Because the LHS of the MATCH operator is 2nd column "b", -** Fts3Cursor.eSearch will be set to FTS3_FULLTEXT_SEARCH+1. (+0 for a, -** +1 for b, +2 for c, +3 for d.) If the LHS of MATCH were "ex1" -** indicating that all columns should be searched, -** then eSearch would be set to FTS3_FULLTEXT_SEARCH+4. +** If the isPoslist argument is true, then it is assumed that the doclist +** contains a position-list following each docid. Otherwise, it is assumed +** that the doclist is simply a list of docids stored as delta encoded +** varints. */ -#define FTS3_FULLSCAN_SEARCH 0 /* Linear scan of %_content table */ -#define FTS3_DOCID_SEARCH 1 /* Lookup by rowid on %_content table */ -#define FTS3_FULLTEXT_SEARCH 2 /* Full-text index search */ - - -struct Fts3Doclist { - char *aAll; /* Array containing doclist (or NULL) */ - int nAll; /* Size of a[] in bytes */ - char *pNextDocid; /* Pointer to next docid */ +static int fts3DoclistCountDocids(char *aList, int nList){ + int nDoc = 0; /* Return value */ + if( aList ){ + char *aEnd = &aList[nList]; /* Pointer to one byte after EOF */ + char *p = aList; /* Cursor */ + while( peSearch==FTS3_DOCID_SEARCH || pCsr->eSearch==FTS3_FULLSCAN_SEARCH ){ + if( SQLITE_ROW!=sqlite3_step(pCsr->pStmt) ){ + pCsr->isEof = 1; + rc = sqlite3_reset(pCsr->pStmt); + }else{ + pCsr->iPrevId = sqlite3_column_int64(pCsr->pStmt, 0); + rc = SQLITE_OK; + } + }else{ + rc = fts3EvalNext((Fts3Cursor *)pCursor); + } + assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); + return rc; +} /* -** A tree of these objects forms the RHS of a MATCH operator. -** -** If Fts3Expr.eType is FTSQUERY_PHRASE and isLoaded is true, then aDoclist -** points to a malloced buffer, size nDoclist bytes, containing the results -** of this phrase query in FTS3 doclist format. As usual, the initial -** "Length" field found in doclists stored on disk is omitted from this -** buffer. -** -** Variable aMI is used only for FTSQUERY_NEAR nodes to store the global -** matchinfo data. If it is not NULL, it points to an array of size nCol*3, -** where nCol is the number of columns in the queried FTS table. The array -** is populated as follows: -** -** aMI[iCol*3 + 0] = Undefined -** aMI[iCol*3 + 1] = Number of occurrences -** aMI[iCol*3 + 2] = Number of rows containing at least one instance +** The following are copied from sqliteInt.h. ** -** The aMI array is allocated using sqlite3_malloc(). It should be freed -** when the expression node is. +** Constants for the largest and smallest possible 64-bit signed integers. +** These macros are designed to work correctly on both 32-bit and 64-bit +** compilers. */ -struct Fts3Expr { - int eType; /* One of the FTSQUERY_XXX values defined below */ - int nNear; /* Valid if eType==FTSQUERY_NEAR */ - Fts3Expr *pParent; /* pParent->pLeft==this or pParent->pRight==this */ - Fts3Expr *pLeft; /* Left operand */ - Fts3Expr *pRight; /* Right operand */ - Fts3Phrase *pPhrase; /* Valid if eType==FTSQUERY_PHRASE */ - - /* The following are used by the fts3_eval.c module. */ - sqlite3_int64 iDocid; /* Current docid */ - u8 bEof; /* True this expression is at EOF already */ - u8 bStart; /* True if iDocid is valid */ - u8 bDeferred; /* True if this expression is entirely deferred */ +#ifndef SQLITE_AMALGAMATION +# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32)) +# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64) +#endif - u32 *aMI; -}; +/* +** If the numeric type of argument pVal is "integer", then return it +** converted to a 64-bit signed integer. Otherwise, return a copy of +** the second parameter, iDefault. +*/ +static sqlite3_int64 fts3DocidRange(sqlite3_value *pVal, i64 iDefault){ + if( pVal ){ + int eType = sqlite3_value_numeric_type(pVal); + if( eType==SQLITE_INTEGER ){ + return sqlite3_value_int64(pVal); + } + } + return iDefault; +} /* -** Candidate values for Fts3Query.eType. Note that the order of the first -** four values is in order of precedence when parsing expressions. For -** example, the following: +** This is the xFilter interface for the virtual table. See +** the virtual table xFilter method documentation for additional +** information. ** -** "a OR b AND c NOT d NEAR e" +** If idxNum==FTS3_FULLSCAN_SEARCH then do a full table scan against +** the %_content table. ** -** is equivalent to: +** If idxNum==FTS3_DOCID_SEARCH then do a docid lookup for a single entry +** in the %_content table. ** -** "a OR (b AND (c NOT (d NEAR e)))" +** If idxNum>=FTS3_FULLTEXT_SEARCH then use the full text index. The +** column on the left-hand side of the MATCH operator is column +** number idxNum-FTS3_FULLTEXT_SEARCH, 0 indexed. argv[0] is the right-hand +** side of the MATCH operator. */ -#define FTSQUERY_NEAR 1 -#define FTSQUERY_NOT 2 -#define FTSQUERY_AND 3 -#define FTSQUERY_OR 4 -#define FTSQUERY_PHRASE 5 - - -/* fts3_write.c */ -SQLITE_PRIVATE int sqlite3Fts3UpdateMethod(sqlite3_vtab*,int,sqlite3_value**,sqlite3_int64*); -SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *); -SQLITE_PRIVATE void sqlite3Fts3PendingTermsClear(Fts3Table *); -SQLITE_PRIVATE int sqlite3Fts3Optimize(Fts3Table *); -SQLITE_PRIVATE int sqlite3Fts3SegReaderNew(int, sqlite3_int64, - sqlite3_int64, sqlite3_int64, const char *, int, Fts3SegReader**); -SQLITE_PRIVATE int sqlite3Fts3SegReaderPending( - Fts3Table*,int,const char*,int,int,Fts3SegReader**); -SQLITE_PRIVATE void sqlite3Fts3SegReaderFree(Fts3SegReader *); -SQLITE_PRIVATE int sqlite3Fts3AllSegdirs(Fts3Table*, int, int, sqlite3_stmt **); -SQLITE_PRIVATE int sqlite3Fts3ReadLock(Fts3Table *); -SQLITE_PRIVATE int sqlite3Fts3ReadBlock(Fts3Table*, sqlite3_int64, char **, int*, int*); - -SQLITE_PRIVATE int sqlite3Fts3SelectDoctotal(Fts3Table *, sqlite3_stmt **); -SQLITE_PRIVATE int sqlite3Fts3SelectDocsize(Fts3Table *, sqlite3_int64, sqlite3_stmt **); - -SQLITE_PRIVATE void sqlite3Fts3FreeDeferredTokens(Fts3Cursor *); -SQLITE_PRIVATE int sqlite3Fts3DeferToken(Fts3Cursor *, Fts3PhraseToken *, int); -SQLITE_PRIVATE int sqlite3Fts3CacheDeferredDoclists(Fts3Cursor *); -SQLITE_PRIVATE void sqlite3Fts3FreeDeferredDoclists(Fts3Cursor *); -SQLITE_PRIVATE void sqlite3Fts3SegmentsClose(Fts3Table *); - -/* Special values interpreted by sqlite3SegReaderCursor() */ -#define FTS3_SEGCURSOR_PENDING -1 -#define FTS3_SEGCURSOR_ALL -2 - -SQLITE_PRIVATE int sqlite3Fts3SegReaderStart(Fts3Table*, Fts3MultiSegReader*, Fts3SegFilter*); -SQLITE_PRIVATE int sqlite3Fts3SegReaderStep(Fts3Table *, Fts3MultiSegReader *); -SQLITE_PRIVATE void sqlite3Fts3SegReaderFinish(Fts3MultiSegReader *); - -SQLITE_PRIVATE int sqlite3Fts3SegReaderCursor( - Fts3Table *, int, int, const char *, int, int, int, Fts3MultiSegReader *); - -/* Flags allowed as part of the 4th argument to SegmentReaderIterate() */ -#define FTS3_SEGMENT_REQUIRE_POS 0x00000001 -#define FTS3_SEGMENT_IGNORE_EMPTY 0x00000002 -#define FTS3_SEGMENT_COLUMN_FILTER 0x00000004 -#define FTS3_SEGMENT_PREFIX 0x00000008 -#define FTS3_SEGMENT_SCAN 0x00000010 - -/* Type passed as 4th argument to SegmentReaderIterate() */ -struct Fts3SegFilter { - const char *zTerm; - int nTerm; - int iCol; - int flags; -}; - -struct Fts3MultiSegReader { - /* Used internally by sqlite3Fts3SegReaderXXX() calls */ - Fts3SegReader **apSegment; /* Array of Fts3SegReader objects */ - int nSegment; /* Size of apSegment array */ - int nAdvance; /* How many seg-readers to advance */ - Fts3SegFilter *pFilter; /* Pointer to filter object */ - char *aBuffer; /* Buffer to merge doclists in */ - int nBuffer; /* Allocated size of aBuffer[] in bytes */ - - int iColFilter; /* If >=0, filter for this column */ - int bRestart; - - /* Used by fts3.c only. */ - int nCost; /* Cost of running iterator */ - int bLookup; /* True if a lookup of a single entry. */ - - /* Output values. Valid only after Fts3SegReaderStep() returns SQLITE_ROW. */ - char *zTerm; /* Pointer to term buffer */ - int nTerm; /* Size of zTerm in bytes */ - char *aDoclist; /* Pointer to doclist buffer */ - int nDoclist; /* Size of aDoclist[] in bytes */ -}; - -/* fts3.c */ -SQLITE_PRIVATE int sqlite3Fts3PutVarint(char *, sqlite3_int64); -SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *, sqlite_int64 *); -SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *, int *); -SQLITE_PRIVATE int sqlite3Fts3VarintLen(sqlite3_uint64); -SQLITE_PRIVATE void sqlite3Fts3Dequote(char *); -SQLITE_PRIVATE void sqlite3Fts3DoclistPrev(int,char*,int,char**,sqlite3_int64*,int*,u8*); - -SQLITE_PRIVATE int sqlite3Fts3EvalPhraseStats(Fts3Cursor *, Fts3Expr *, u32 *); +static int fts3FilterMethod( + sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ + int idxNum, /* Strategy index */ + const char *idxStr, /* Unused */ + int nVal, /* Number of elements in apVal */ + sqlite3_value **apVal /* Arguments for the indexing scheme */ +){ + int rc; + char *zSql; /* SQL statement used to access %_content */ + int eSearch; + Fts3Table *p = (Fts3Table *)pCursor->pVtab; + Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; -/* fts3_tokenizer.c */ -SQLITE_PRIVATE const char *sqlite3Fts3NextToken(const char *, int *); -SQLITE_PRIVATE int sqlite3Fts3InitHashTable(sqlite3 *, Fts3Hash *, const char *); -SQLITE_PRIVATE int sqlite3Fts3InitTokenizer(Fts3Hash *pHash, const char *, - sqlite3_tokenizer **, char ** -); -SQLITE_PRIVATE int sqlite3Fts3IsIdChar(char); + sqlite3_value *pCons = 0; /* The MATCH or rowid constraint, if any */ + sqlite3_value *pLangid = 0; /* The "langid = ?" constraint, if any */ + sqlite3_value *pDocidGe = 0; /* The "docid >= ?" constraint, if any */ + sqlite3_value *pDocidLe = 0; /* The "docid <= ?" constraint, if any */ + int iIdx; -/* fts3_snippet.c */ -SQLITE_PRIVATE void sqlite3Fts3Offsets(sqlite3_context*, Fts3Cursor*); -SQLITE_PRIVATE void sqlite3Fts3Snippet(sqlite3_context *, Fts3Cursor *, const char *, - const char *, const char *, int, int -); -SQLITE_PRIVATE void sqlite3Fts3Matchinfo(sqlite3_context *, Fts3Cursor *, const char *); + UNUSED_PARAMETER(idxStr); + UNUSED_PARAMETER(nVal); -/* fts3_expr.c */ -SQLITE_PRIVATE int sqlite3Fts3ExprParse(sqlite3_tokenizer *, - char **, int, int, const char *, int, Fts3Expr ** -); -SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *); -#ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db); -SQLITE_PRIVATE int sqlite3Fts3InitTerm(sqlite3 *db); -#endif + eSearch = (idxNum & 0x0000FFFF); + assert( eSearch>=0 && eSearch<=(FTS3_FULLTEXT_SEARCH+p->nColumn) ); + assert( p->pSegments==0 ); -/* fts3_aux.c */ -SQLITE_PRIVATE int sqlite3Fts3InitAux(sqlite3 *db); + /* Collect arguments into local variables */ + iIdx = 0; + if( eSearch!=FTS3_FULLSCAN_SEARCH ) pCons = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_LANGID ) pLangid = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_DOCID_GE ) pDocidGe = apVal[iIdx++]; + if( idxNum & FTS3_HAVE_DOCID_LE ) pDocidLe = apVal[iIdx++]; + assert( iIdx==nVal ); -SQLITE_PRIVATE int sqlite3Fts3TermSegReaderCursor( - Fts3Cursor *pCsr, /* Virtual table cursor handle */ - const char *zTerm, /* Term to query for */ - int nTerm, /* Size of zTerm in bytes */ - int isPrefix, /* True for a prefix search */ - Fts3MultiSegReader **ppSegcsr /* OUT: Allocated seg-reader cursor */ -); + /* In case the cursor has been used before, clear it now. */ + sqlite3_finalize(pCsr->pStmt); + sqlite3_free(pCsr->aDoclist); + sqlite3_free(pCsr->aMatchinfo); + sqlite3Fts3ExprFree(pCsr->pExpr); + memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); -SQLITE_PRIVATE void sqlite3Fts3EvalPhraseCleanup(Fts3Phrase *); + /* Set the lower and upper bounds on docids to return */ + pCsr->iMinDocid = fts3DocidRange(pDocidGe, SMALLEST_INT64); + pCsr->iMaxDocid = fts3DocidRange(pDocidLe, LARGEST_INT64); -SQLITE_PRIVATE int sqlite3Fts3EvalStart(Fts3Cursor *, Fts3Expr *, int); -SQLITE_PRIVATE int sqlite3Fts3EvalNext(Fts3Cursor *pCsr); + if( idxStr ){ + pCsr->bDesc = (idxStr[0]=='D'); + }else{ + pCsr->bDesc = p->bDescIdx; + } + pCsr->eSearch = (i16)eSearch; -SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart( - Fts3Table*, Fts3MultiSegReader*, int, const char*, int); -SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext( - Fts3Table *, Fts3MultiSegReader *, sqlite3_int64 *, char **, int *); -SQLITE_PRIVATE char *sqlite3Fts3EvalPhrasePoslist(Fts3Cursor *, Fts3Expr *, int iCol); -SQLITE_PRIVATE int sqlite3Fts3MsrOvfl(Fts3Cursor *, Fts3MultiSegReader *, int *); -SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr); + if( eSearch!=FTS3_DOCID_SEARCH && eSearch!=FTS3_FULLSCAN_SEARCH ){ + int iCol = eSearch-FTS3_FULLTEXT_SEARCH; + const char *zQuery = (const char *)sqlite3_value_text(pCons); -SQLITE_PRIVATE int sqlite3Fts3DeferredTokenList(Fts3DeferredToken *, char **, int *); + if( zQuery==0 && sqlite3_value_type(pCons)!=SQLITE_NULL ){ + return SQLITE_NOMEM; + } -#endif /* SQLITE_ENABLE_FTS3 */ -#endif /* _FTSINT_H */ + pCsr->iLangid = 0; + if( pLangid ) pCsr->iLangid = sqlite3_value_int(pLangid); -/************** End of fts3Int.h *********************************************/ -/************** Continuing where we left off in fts3.c ***********************/ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + assert( p->base.zErrMsg==0 ); + rc = sqlite3Fts3ExprParse(p->pTokenizer, pCsr->iLangid, + p->azColumn, p->bFts4, p->nColumn, iCol, zQuery, -1, &pCsr->pExpr, + &p->base.zErrMsg + ); + if( rc!=SQLITE_OK ){ + return rc; + } -#if defined(SQLITE_ENABLE_FTS3) && !defined(SQLITE_CORE) -# define SQLITE_CORE 1 -#endif + rc = fts3EvalStart(pCsr); + sqlite3Fts3SegmentsClose(p); + if( rc!=SQLITE_OK ) return rc; + pCsr->pNextId = pCsr->aDoclist; + pCsr->iPrevId = 0; + } + /* Compile a SELECT statement for this cursor. For a full-table-scan, the + ** statement loops through all rows of the %_content table. For a + ** full-text query or docid lookup, the statement retrieves a single + ** row by docid. + */ + if( eSearch==FTS3_FULLSCAN_SEARCH ){ + zSql = sqlite3_mprintf( + "SELECT %s ORDER BY rowid %s", + p->zReadExprlist, (pCsr->bDesc ? "DESC" : "ASC") + ); + if( zSql ){ + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); + sqlite3_free(zSql); + }else{ + rc = SQLITE_NOMEM; + } + }else if( eSearch==FTS3_DOCID_SEARCH ){ + rc = fts3CursorSeekStmt(pCsr, &pCsr->pStmt); + if( rc==SQLITE_OK ){ + rc = sqlite3_bind_value(pCsr->pStmt, 1, pCons); + } + } + if( rc!=SQLITE_OK ) return rc; -#ifndef SQLITE_CORE - SQLITE_EXTENSION_INIT1 -#endif + return fts3NextMethod(pCursor); +} /* -** Write a 64-bit variable-length integer to memory starting at p[0]. -** The length of data written will be between 1 and FTS3_VARINT_MAX bytes. -** The number of bytes written is returned. +** This is the xEof method of the virtual table. SQLite calls this +** routine to find out if it has reached the end of a result set. */ -SQLITE_PRIVATE int sqlite3Fts3PutVarint(char *p, sqlite_int64 v){ - unsigned char *q = (unsigned char *) p; - sqlite_uint64 vu = v; - do{ - *q++ = (unsigned char) ((vu & 0x7f) | 0x80); - vu >>= 7; - }while( vu!=0 ); - q[-1] &= 0x7f; /* turn off high bit in final byte */ - assert( q - (unsigned char *)p <= FTS3_VARINT_MAX ); - return (int) (q - (unsigned char *)p); +static int fts3EofMethod(sqlite3_vtab_cursor *pCursor){ + return ((Fts3Cursor *)pCursor)->isEof; } /* -** Read a 64-bit variable-length integer from memory starting at p[0]. -** Return the number of bytes read, or 0 on error. -** The value is stored in *v. +** This is the xRowid method. The SQLite core calls this routine to +** retrieve the rowid for the current row of the result set. fts3 +** exposes %_content.docid as the rowid for the virtual table. The +** rowid should be written to *pRowid. */ -SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){ - const unsigned char *q = (const unsigned char *) p; - sqlite_uint64 x = 0, y = 1; - while( (*q&0x80)==0x80 && q-(unsigned char *)piPrevId; + return SQLITE_OK; } -/* -** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to a -** 32-bit integer before it is returned. +/* +** This is the xColumn method, called by SQLite to request a value from +** the row that the supplied cursor currently points to. +** +** If: +** +** (iCol < p->nColumn) -> The value of the iCol'th user column. +** (iCol == p->nColumn) -> Magic column with the same name as the table. +** (iCol == p->nColumn+1) -> Docid column +** (iCol == p->nColumn+2) -> Langid column */ -SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *p, int *pi){ - sqlite_int64 i; - int ret = sqlite3Fts3GetVarint(p, &i); - *pi = (int) i; - return ret; +static int fts3ColumnMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite3_context *pCtx, /* Context for sqlite3_result_xxx() calls */ + int iCol /* Index of column to read value from */ +){ + int rc = SQLITE_OK; /* Return Code */ + Fts3Cursor *pCsr = (Fts3Cursor *) pCursor; + Fts3Table *p = (Fts3Table *)pCursor->pVtab; + + /* The column value supplied by SQLite must be in range. */ + assert( iCol>=0 && iCol<=p->nColumn+2 ); + + if( iCol==p->nColumn+1 ){ + /* This call is a request for the "docid" column. Since "docid" is an + ** alias for "rowid", use the xRowid() method to obtain the value. + */ + sqlite3_result_int64(pCtx, pCsr->iPrevId); + }else if( iCol==p->nColumn ){ + /* The extra column whose name is the same as the table. + ** Return a blob which is a pointer to the cursor. */ + sqlite3_result_blob(pCtx, &pCsr, sizeof(pCsr), SQLITE_TRANSIENT); + }else if( iCol==p->nColumn+2 && pCsr->pExpr ){ + sqlite3_result_int64(pCtx, pCsr->iLangid); + }else{ + /* The requested column is either a user column (one that contains + ** indexed data), or the language-id column. */ + rc = fts3CursorSeek(0, pCsr); + + if( rc==SQLITE_OK ){ + if( iCol==p->nColumn+2 ){ + int iLangid = 0; + if( p->zLanguageid ){ + iLangid = sqlite3_column_int(pCsr->pStmt, p->nColumn+1); + } + sqlite3_result_int(pCtx, iLangid); + }else if( sqlite3_data_count(pCsr->pStmt)>(iCol+1) ){ + sqlite3_result_value(pCtx, sqlite3_column_value(pCsr->pStmt, iCol+1)); + } + } + } + + assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); + return rc; } -/* -** Return the number of bytes required to encode v as a varint +/* +** This function is the implementation of the xUpdate callback used by +** FTS3 virtual tables. It is invoked by SQLite each time a row is to be +** inserted, updated or deleted. */ -SQLITE_PRIVATE int sqlite3Fts3VarintLen(sqlite3_uint64 v){ - int i = 0; - do{ - i++; - v >>= 7; - }while( v!=0 ); - return i; +static int fts3UpdateMethod( + sqlite3_vtab *pVtab, /* Virtual table handle */ + int nArg, /* Size of argument array */ + sqlite3_value **apVal, /* Array of arguments */ + sqlite_int64 *pRowid /* OUT: The affected (or effected) rowid */ +){ + return sqlite3Fts3UpdateMethod(pVtab, nArg, apVal, pRowid); } /* -** Convert an SQL-style quoted string into a normal string by removing -** the quote characters. The conversion is done in-place. If the -** input does not begin with a quote character, then this routine -** is a no-op. -** -** Examples: -** -** "abc" becomes abc -** 'xyz' becomes xyz -** [pqr] becomes pqr -** `mno` becomes mno -** +** Implementation of xSync() method. Flush the contents of the pending-terms +** hash-table to the database. */ -SQLITE_PRIVATE void sqlite3Fts3Dequote(char *z){ - char quote; /* Quote character (if any ) */ +static int fts3SyncMethod(sqlite3_vtab *pVtab){ - quote = z[0]; - if( quote=='[' || quote=='\'' || quote=='"' || quote=='`' ){ - int iIn = 1; /* Index of next byte to read from input */ - int iOut = 0; /* Index of next byte to write to output */ + /* Following an incremental-merge operation, assuming that the input + ** segments are not completely consumed (the usual case), they are updated + ** in place to remove the entries that have already been merged. This + ** involves updating the leaf block that contains the smallest unmerged + ** entry and each block (if any) between the leaf and the root node. So + ** if the height of the input segment b-trees is N, and input segments + ** are merged eight at a time, updating the input segments at the end + ** of an incremental-merge requires writing (8*(1+N)) blocks. N is usually + ** small - often between 0 and 2. So the overhead of the incremental + ** merge is somewhere between 8 and 24 blocks. To avoid this overhead + ** dwarfing the actual productive work accomplished, the incremental merge + ** is only attempted if it will write at least 64 leaf blocks. Hence + ** nMinMerge. + ** + ** Of course, updating the input segments also involves deleting a bunch + ** of blocks from the segments table. But this is not considered overhead + ** as it would also be required by a crisis-merge that used the same input + ** segments. + */ + const u32 nMinMerge = 64; /* Minimum amount of incr-merge work to do */ - /* If the first byte was a '[', then the close-quote character is a ']' */ - if( quote=='[' ) quote = ']'; + Fts3Table *p = (Fts3Table*)pVtab; + int rc = sqlite3Fts3PendingTermsFlush(p); - while( ALWAYS(z[iIn]) ){ - if( z[iIn]==quote ){ - if( z[iIn+1]!=quote ) break; - z[iOut++] = quote; - iIn += 2; - }else{ - z[iOut++] = z[iIn++]; - } - } - z[iOut] = '\0'; + if( rc==SQLITE_OK + && p->nLeafAdd>(nMinMerge/16) + && p->nAutoincrmerge && p->nAutoincrmerge!=0xff + ){ + int mxLevel = 0; /* Maximum relative level value in db */ + int A; /* Incr-merge parameter A */ + + rc = sqlite3Fts3MaxLevel(p, &mxLevel); + assert( rc==SQLITE_OK || mxLevel==0 ); + A = p->nLeafAdd * mxLevel; + A += (A/2); + if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, p->nAutoincrmerge); } + sqlite3Fts3SegmentsClose(p); + return rc; } /* -** Read a single varint from the doclist at *pp and advance *pp to point -** to the first byte past the end of the varint. Add the value of the varint -** to *pVal. +** If it is currently unknown whether or not the FTS table has an %_stat +** table (if p->bHasStat==2), attempt to determine this (set p->bHasStat +** to 0 or 1). Return SQLITE_OK if successful, or an SQLite error code +** if an error occurs. */ -static void fts3GetDeltaVarint(char **pp, sqlite3_int64 *pVal){ - sqlite3_int64 iVal; - *pp += sqlite3Fts3GetVarint(*pp, &iVal); - *pVal += iVal; +static int fts3SetHasStat(Fts3Table *p){ + int rc = SQLITE_OK; + if( p->bHasStat==2 ){ + const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'"; + char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName); + if( zSql ){ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + if( rc==SQLITE_OK ){ + int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW); + rc = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) p->bHasStat = bHasStat; + } + sqlite3_free(zSql); + }else{ + rc = SQLITE_NOMEM; + } + } + return rc; } /* -** When this function is called, *pp points to the first byte following a -** varint that is part of a doclist (or position-list, or any other list -** of varints). This function moves *pp to point to the start of that varint, -** and sets *pVal by the varint value. -** -** Argument pStart points to the first byte of the doclist that the -** varint is part of. +** Implementation of xBegin() method. */ -static void fts3GetReverseVarint( - char **pp, - char *pStart, - sqlite3_int64 *pVal -){ - sqlite3_int64 iVal; - char *p = *pp; - - /* Pointer p now points at the first byte past the varint we are - ** interested in. So, unless the doclist is corrupt, the 0x80 bit is - ** clear on character p[-1]. */ - for(p = (*pp)-2; p>=pStart && *p&0x80; p--); - p++; - *pp = p; - - sqlite3Fts3GetVarint(p, &iVal); - *pVal = iVal; +static int fts3BeginMethod(sqlite3_vtab *pVtab){ + Fts3Table *p = (Fts3Table*)pVtab; + UNUSED_PARAMETER(pVtab); + assert( p->pSegments==0 ); + assert( p->nPendingData==0 ); + assert( p->inTransaction!=1 ); + TESTONLY( p->inTransaction = 1 ); + TESTONLY( p->mxSavepoint = -1; ); + p->nLeafAdd = 0; + return fts3SetHasStat(p); } /* -** The xDisconnect() virtual table method. +** Implementation of xCommit() method. This is a no-op. The contents of +** the pending-terms hash-table have already been flushed into the database +** by fts3SyncMethod(). */ -static int fts3DisconnectMethod(sqlite3_vtab *pVtab){ - Fts3Table *p = (Fts3Table *)pVtab; - int i; - +static int fts3CommitMethod(sqlite3_vtab *pVtab){ + TESTONLY( Fts3Table *p = (Fts3Table*)pVtab ); + UNUSED_PARAMETER(pVtab); assert( p->nPendingData==0 ); + assert( p->inTransaction!=0 ); assert( p->pSegments==0 ); + TESTONLY( p->inTransaction = 0 ); + TESTONLY( p->mxSavepoint = -1; ); + return SQLITE_OK; +} - /* Free any prepared statements held */ - for(i=0; iaStmt); i++){ - sqlite3_finalize(p->aStmt[i]); - } - sqlite3_free(p->zSegmentsTbl); - sqlite3_free(p->zReadExprlist); - sqlite3_free(p->zWriteExprlist); +/* +** Implementation of xRollback(). Discard the contents of the pending-terms +** hash-table. Any changes made to the database are reverted by SQLite. +*/ +static int fts3RollbackMethod(sqlite3_vtab *pVtab){ + Fts3Table *p = (Fts3Table*)pVtab; + sqlite3Fts3PendingTermsClear(p); + assert( p->inTransaction!=0 ); + TESTONLY( p->inTransaction = 0 ); + TESTONLY( p->mxSavepoint = -1; ); + return SQLITE_OK; +} - /* Invoke the tokenizer destructor to free the tokenizer. */ - p->pTokenizer->pModule->xDestroy(p->pTokenizer); +/* +** When called, *ppPoslist must point to the byte immediately following the +** end of a position-list. i.e. ( (*ppPoslist)[-1]==POS_END ). This function +** moves *ppPoslist so that it instead points to the first byte of the +** same position list. +*/ +static void fts3ReversePoslist(char *pStart, char **ppPoslist){ + char *p = &(*ppPoslist)[-2]; + char c = 0; - sqlite3_free(p); - return SQLITE_OK; + while( p>pStart && (c=*p--)==0 ); + while( p>pStart && (*p & 0x80) | c ){ + c = *p--; + } + if( p>pStart ){ p = &p[2]; } + while( *p++&0x80 ); + *ppPoslist = p; } /* -** Construct one or more SQL statements from the format string given -** and then evaluate those statements. The success code is written -** into *pRc. +** Helper function used by the implementation of the overloaded snippet(), +** offsets() and optimize() SQL functions. ** -** If *pRc is initially non-zero then this routine is a no-op. +** If the value passed as the third argument is a blob of size +** sizeof(Fts3Cursor*), then the blob contents are copied to the +** output variable *ppCsr and SQLITE_OK is returned. Otherwise, an error +** message is written to context pContext and SQLITE_ERROR returned. The +** string passed via zFunc is used as part of the error message. */ -static void fts3DbExec( - int *pRc, /* Success code */ - sqlite3 *db, /* Database in which to run SQL */ - const char *zFormat, /* Format string for SQL */ - ... /* Arguments to the format string */ +static int fts3FunctionArg( + sqlite3_context *pContext, /* SQL function call context */ + const char *zFunc, /* Function name */ + sqlite3_value *pVal, /* argv[0] passed to function */ + Fts3Cursor **ppCsr /* OUT: Store cursor handle here */ ){ - va_list ap; - char *zSql; - if( *pRc ) return; - va_start(ap, zFormat); - zSql = sqlite3_vmprintf(zFormat, ap); - va_end(ap); - if( zSql==0 ){ - *pRc = SQLITE_NOMEM; - }else{ - *pRc = sqlite3_exec(db, zSql, 0, 0, 0); - sqlite3_free(zSql); + Fts3Cursor *pRet; + if( sqlite3_value_type(pVal)!=SQLITE_BLOB + || sqlite3_value_bytes(pVal)!=sizeof(Fts3Cursor *) + ){ + char *zErr = sqlite3_mprintf("illegal first argument to %s", zFunc); + sqlite3_result_error(pContext, zErr, -1); + sqlite3_free(zErr); + return SQLITE_ERROR; } + memcpy(&pRet, sqlite3_value_blob(pVal), sizeof(Fts3Cursor *)); + *ppCsr = pRet; + return SQLITE_OK; } /* -** The xDestroy() virtual table method. +** Implementation of the snippet() function for FTS3 */ -static int fts3DestroyMethod(sqlite3_vtab *pVtab){ - int rc = SQLITE_OK; /* Return code */ - Fts3Table *p = (Fts3Table *)pVtab; - sqlite3 *db = p->db; - - /* Drop the shadow tables */ - fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_content'", p->zDb, p->zName); - fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_segments'", p->zDb,p->zName); - fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_segdir'", p->zDb, p->zName); - fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_docsize'", p->zDb, p->zName); - fts3DbExec(&rc, db, "DROP TABLE IF EXISTS %Q.'%q_stat'", p->zDb, p->zName); +static void fts3SnippetFunc( + sqlite3_context *pContext, /* SQLite function call context */ + int nVal, /* Size of apVal[] array */ + sqlite3_value **apVal /* Array of arguments */ +){ + Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ + const char *zStart = ""; + const char *zEnd = ""; + const char *zEllipsis = "..."; + int iCol = -1; + int nToken = 15; /* Default number of tokens in snippet */ - /* If everything has worked, invoke fts3DisconnectMethod() to free the - ** memory associated with the Fts3Table structure and return SQLITE_OK. - ** Otherwise, return an SQLite error code. + /* There must be at least one argument passed to this function (otherwise + ** the non-overloaded version would have been called instead of this one). */ - return (rc==SQLITE_OK ? fts3DisconnectMethod(pVtab) : rc); -} + assert( nVal>=1 ); + + if( nVal>6 ){ + sqlite3_result_error(pContext, + "wrong number of arguments to function snippet()", -1); + return; + } + if( fts3FunctionArg(pContext, "snippet", apVal[0], &pCsr) ) return; + switch( nVal ){ + case 6: nToken = sqlite3_value_int(apVal[5]); + case 5: iCol = sqlite3_value_int(apVal[4]); + case 4: zEllipsis = (const char*)sqlite3_value_text(apVal[3]); + case 3: zEnd = (const char*)sqlite3_value_text(apVal[2]); + case 2: zStart = (const char*)sqlite3_value_text(apVal[1]); + } + if( !zEllipsis || !zEnd || !zStart ){ + sqlite3_result_error_nomem(pContext); + }else if( SQLITE_OK==fts3CursorSeek(pContext, pCsr) ){ + sqlite3Fts3Snippet(pContext, pCsr, zStart, zEnd, zEllipsis, iCol, nToken); + } +} /* -** Invoke sqlite3_declare_vtab() to declare the schema for the FTS3 table -** passed as the first argument. This is done as part of the xConnect() -** and xCreate() methods. -** -** If *pRc is non-zero when this function is called, it is a no-op. -** Otherwise, if an error occurs, an SQLite error code is stored in *pRc -** before returning. +** Implementation of the offsets() function for FTS3 */ -static void fts3DeclareVtab(int *pRc, Fts3Table *p){ - if( *pRc==SQLITE_OK ){ - int i; /* Iterator variable */ - int rc; /* Return code */ - char *zSql; /* SQL statement passed to declare_vtab() */ - char *zCols; /* List of user defined columns */ - - sqlite3_vtab_config(p->db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1); - - /* Create a list of user columns for the virtual table */ - zCols = sqlite3_mprintf("%Q, ", p->azColumn[0]); - for(i=1; zCols && inColumn; i++){ - zCols = sqlite3_mprintf("%z%Q, ", zCols, p->azColumn[i]); - } +static void fts3OffsetsFunc( + sqlite3_context *pContext, /* SQLite function call context */ + int nVal, /* Size of argument array */ + sqlite3_value **apVal /* Array of arguments */ +){ + Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ - /* Create the whole "CREATE TABLE" statement to pass to SQLite */ - zSql = sqlite3_mprintf( - "CREATE TABLE x(%s %Q HIDDEN, docid HIDDEN)", zCols, p->zName - ); - if( !zCols || !zSql ){ - rc = SQLITE_NOMEM; - }else{ - rc = sqlite3_declare_vtab(p->db, zSql); - } + UNUSED_PARAMETER(nVal); - sqlite3_free(zSql); - sqlite3_free(zCols); - *pRc = rc; + assert( nVal==1 ); + if( fts3FunctionArg(pContext, "offsets", apVal[0], &pCsr) ) return; + assert( pCsr ); + if( SQLITE_OK==fts3CursorSeek(pContext, pCsr) ){ + sqlite3Fts3Offsets(pContext, pCsr); } } -/* -** Create the backing store tables (%_content, %_segments and %_segdir) -** required by the FTS3 table passed as the only argument. This is done -** as part of the vtab xCreate() method. +/* +** Implementation of the special optimize() function for FTS3. This +** function merges all segments in the database to a single segment. +** Example usage is: ** -** If the p->bHasDocsize boolean is true (indicating that this is an -** FTS4 table, not an FTS3 table) then also create the %_docsize and -** %_stat tables required by FTS4. +** SELECT optimize(t) FROM t LIMIT 1; +** +** where 't' is the name of an FTS3 table. */ -static int fts3CreateTables(Fts3Table *p){ - int rc = SQLITE_OK; /* Return code */ - int i; /* Iterator variable */ - char *zContentCols; /* Columns of %_content table */ - sqlite3 *db = p->db; /* The database connection */ +static void fts3OptimizeFunc( + sqlite3_context *pContext, /* SQLite function call context */ + int nVal, /* Size of argument array */ + sqlite3_value **apVal /* Array of arguments */ +){ + int rc; /* Return code */ + Fts3Table *p; /* Virtual table handle */ + Fts3Cursor *pCursor; /* Cursor handle passed through apVal[0] */ - /* Create a list of user columns for the content table */ - zContentCols = sqlite3_mprintf("docid INTEGER PRIMARY KEY"); - for(i=0; zContentCols && inColumn; i++){ - char *z = p->azColumn[i]; - zContentCols = sqlite3_mprintf("%z, 'c%d%q'", zContentCols, i, z); - } - if( zContentCols==0 ) rc = SQLITE_NOMEM; + UNUSED_PARAMETER(nVal); - /* Create the content table */ - fts3DbExec(&rc, db, - "CREATE TABLE %Q.'%q_content'(%s)", - p->zDb, p->zName, zContentCols - ); - sqlite3_free(zContentCols); - /* Create other tables */ - fts3DbExec(&rc, db, - "CREATE TABLE %Q.'%q_segments'(blockid INTEGER PRIMARY KEY, block BLOB);", - p->zDb, p->zName - ); - fts3DbExec(&rc, db, - "CREATE TABLE %Q.'%q_segdir'(" - "level INTEGER," - "idx INTEGER," - "start_block INTEGER," - "leaves_end_block INTEGER," - "end_block INTEGER," - "root BLOB," - "PRIMARY KEY(level, idx)" - ");", - p->zDb, p->zName - ); - if( p->bHasDocsize ){ - fts3DbExec(&rc, db, - "CREATE TABLE %Q.'%q_docsize'(docid INTEGER PRIMARY KEY, size BLOB);", - p->zDb, p->zName - ); - } - if( p->bHasStat ){ - fts3DbExec(&rc, db, - "CREATE TABLE %Q.'%q_stat'(id INTEGER PRIMARY KEY, value BLOB);", - p->zDb, p->zName - ); + assert( nVal==1 ); + if( fts3FunctionArg(pContext, "optimize", apVal[0], &pCursor) ) return; + p = (Fts3Table *)pCursor->base.pVtab; + assert( p ); + + rc = sqlite3Fts3Optimize(p); + + switch( rc ){ + case SQLITE_OK: + sqlite3_result_text(pContext, "Index optimized", -1, SQLITE_STATIC); + break; + case SQLITE_DONE: + sqlite3_result_text(pContext, "Index already optimal", -1, SQLITE_STATIC); + break; + default: + sqlite3_result_error_code(pContext, rc); + break; } - return rc; } /* -** Store the current database page-size in bytes in p->nPgsz. -** -** If *pRc is non-zero when this function is called, it is a no-op. -** Otherwise, if an error occurs, an SQLite error code is stored in *pRc -** before returning. +** Implementation of the matchinfo() function for FTS3 */ -static void fts3DatabasePageSize(int *pRc, Fts3Table *p){ - if( *pRc==SQLITE_OK ){ - int rc; /* Return code */ - char *zSql; /* SQL text "PRAGMA %Q.page_size" */ - sqlite3_stmt *pStmt; /* Compiled "PRAGMA %Q.page_size" statement */ - - zSql = sqlite3_mprintf("PRAGMA %Q.page_size", p->zDb); - if( !zSql ){ - rc = SQLITE_NOMEM; - }else{ - rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0); - if( rc==SQLITE_OK ){ - sqlite3_step(pStmt); - p->nPgsz = sqlite3_column_int(pStmt, 0); - rc = sqlite3_finalize(pStmt); - }else if( rc==SQLITE_AUTH ){ - p->nPgsz = 1024; - rc = SQLITE_OK; - } +static void fts3MatchinfoFunc( + sqlite3_context *pContext, /* SQLite function call context */ + int nVal, /* Size of argument array */ + sqlite3_value **apVal /* Array of arguments */ +){ + Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ + assert( nVal==1 || nVal==2 ); + if( SQLITE_OK==fts3FunctionArg(pContext, "matchinfo", apVal[0], &pCsr) ){ + const char *zArg = 0; + if( nVal>1 ){ + zArg = (const char *)sqlite3_value_text(apVal[1]); } - assert( p->nPgsz>0 || rc!=SQLITE_OK ); - sqlite3_free(zSql); - *pRc = rc; + sqlite3Fts3Matchinfo(pContext, pCsr, zArg); } } /* -** "Special" FTS4 arguments are column specifications of the following form: -** -** = -** -** There may not be whitespace surrounding the "=" character. The -** term may be quoted, but the may not. +** This routine implements the xFindFunction method for the FTS3 +** virtual table. */ -static int fts3IsSpecialColumn( - const char *z, - int *pnKey, - char **pzValue +static int fts3FindFunctionMethod( + sqlite3_vtab *pVtab, /* Virtual table handle */ + int nArg, /* Number of SQL function arguments */ + const char *zName, /* Name of SQL function */ + void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), /* OUT: Result */ + void **ppArg /* Unused */ ){ - char *zValue; - const char *zCsr = z; + struct Overloaded { + const char *zName; + void (*xFunc)(sqlite3_context*,int,sqlite3_value**); + } aOverload[] = { + { "snippet", fts3SnippetFunc }, + { "offsets", fts3OffsetsFunc }, + { "optimize", fts3OptimizeFunc }, + { "matchinfo", fts3MatchinfoFunc }, + }; + int i; /* Iterator variable */ - while( *zCsr!='=' ){ - if( *zCsr=='\0' ) return 0; - zCsr++; - } + UNUSED_PARAMETER(pVtab); + UNUSED_PARAMETER(nArg); + UNUSED_PARAMETER(ppArg); - *pnKey = (int)(zCsr-z); - zValue = sqlite3_mprintf("%s", &zCsr[1]); - if( zValue ){ - sqlite3Fts3Dequote(zValue); + for(i=0; idb; /* Database connection */ + int rc; /* Return Code */ + + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + rc = fts3SetHasStat(p); + + /* As it happens, the pending terms table is always empty here. This is + ** because an "ALTER TABLE RENAME TABLE" statement inside a transaction + ** always opens a savepoint transaction. And the xSavepoint() method + ** flushes the pending terms table. But leave the (no-op) call to + ** PendingTermsFlush() in in case that changes. + */ + assert( p->nPendingData==0 ); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3PendingTermsFlush(p); + } + + if( p->zContentTbl==0 ){ + fts3DbExec(&rc, db, + "ALTER TABLE %Q.'%q_content' RENAME TO '%q_content';", + p->zDb, p->zName, zName + ); + } + + if( p->bHasDocsize ){ + fts3DbExec(&rc, db, + "ALTER TABLE %Q.'%q_docsize' RENAME TO '%q_docsize';", + p->zDb, p->zName, zName + ); + } + if( p->bHasStat ){ + fts3DbExec(&rc, db, + "ALTER TABLE %Q.'%q_stat' RENAME TO '%q_stat';", + p->zDb, p->zName, zName + ); } + fts3DbExec(&rc, db, + "ALTER TABLE %Q.'%q_segments' RENAME TO '%q_segments';", + p->zDb, p->zName, zName + ); + fts3DbExec(&rc, db, + "ALTER TABLE %Q.'%q_segdir' RENAME TO '%q_segdir';", + p->zDb, p->zName, zName + ); + return rc; } /* -** Return a copy of input string zInput enclosed in double-quotes (") and -** with all double quote characters escaped. For example: +** The xSavepoint() method. ** -** fts3QuoteId("un \"zip\"") -> "un \"\"zip\"\"" -** -** The pointer returned points to memory obtained from sqlite3_malloc(). It -** is the callers responsibility to call sqlite3_free() to release this -** memory. +** Flush the contents of the pending-terms table to disk. */ -static char *fts3QuoteId(char const *zInput){ - int nRet; - char *zRet; - nRet = 2 + strlen(zInput)*2 + 1; - zRet = sqlite3_malloc(nRet); - if( zRet ){ - int i; - char *z = zRet; - *(z++) = '"'; - for(i=0; zInput[i]; i++){ - if( zInput[i]=='"' ) *(z++) = '"'; - *(z++) = zInput[i]; - } - *(z++) = '"'; - *(z++) = '\0'; +static int fts3SavepointMethod(sqlite3_vtab *pVtab, int iSavepoint){ + int rc = SQLITE_OK; + UNUSED_PARAMETER(iSavepoint); + assert( ((Fts3Table *)pVtab)->inTransaction ); + assert( ((Fts3Table *)pVtab)->mxSavepoint < iSavepoint ); + TESTONLY( ((Fts3Table *)pVtab)->mxSavepoint = iSavepoint ); + if( ((Fts3Table *)pVtab)->bIgnoreSavepoint==0 ){ + rc = fts3SyncMethod(pVtab); } - return zRet; + return rc; } /* -** Return a list of comma separated SQL expressions that could be used -** in a SELECT statement such as the following: -** -** SELECT FROM %_content AS x ... -** -** to return the docid, followed by each column of text data in order -** from left to write. If parameter zFunc is not NULL, then instead of -** being returned directly each column of text data is passed to an SQL -** function named zFunc first. For example, if zFunc is "unzip" and the -** table has the three user-defined columns "a", "b", and "c", the following -** string is returned: -** -** "docid, unzip(x.'a'), unzip(x.'b'), unzip(x.'c')" -** -** The pointer returned points to a buffer allocated by sqlite3_malloc(). It -** is the responsibility of the caller to eventually free it. +** The xRelease() method. ** -** If *pRc is not SQLITE_OK when this function is called, it is a no-op (and -** a NULL pointer is returned). Otherwise, if an OOM error is encountered -** by this function, NULL is returned and *pRc is set to SQLITE_NOMEM. If -** no error occurs, *pRc is left unmodified. +** This is a no-op. */ -static char *fts3ReadExprList(Fts3Table *p, const char *zFunc, int *pRc){ - char *zRet = 0; - char *zFree = 0; - char *zFunction; - int i; - - if( !zFunc ){ - zFunction = ""; - }else{ - zFree = zFunction = fts3QuoteId(zFunc); - } - fts3Appendf(pRc, &zRet, "docid"); - for(i=0; inColumn; i++){ - fts3Appendf(pRc, &zRet, ",%s(x.'c%d%q')", zFunction, i, p->azColumn[i]); - } - sqlite3_free(zFree); - return zRet; +static int fts3ReleaseMethod(sqlite3_vtab *pVtab, int iSavepoint){ + TESTONLY( Fts3Table *p = (Fts3Table*)pVtab ); + UNUSED_PARAMETER(iSavepoint); + UNUSED_PARAMETER(pVtab); + assert( p->inTransaction ); + assert( p->mxSavepoint >= iSavepoint ); + TESTONLY( p->mxSavepoint = iSavepoint-1 ); + return SQLITE_OK; } /* -** Return a list of N comma separated question marks, where N is the number -** of columns in the %_content table (one for the docid plus one for each -** user-defined text column). -** -** If argument zFunc is not NULL, then all but the first question mark -** is preceded by zFunc and an open bracket, and followed by a closed -** bracket. For example, if zFunc is "zip" and the FTS3 table has three -** user-defined text columns, the following string is returned: -** -** "?, zip(?), zip(?), zip(?)" -** -** The pointer returned points to a buffer allocated by sqlite3_malloc(). It -** is the responsibility of the caller to eventually free it. +** The xRollbackTo() method. ** -** If *pRc is not SQLITE_OK when this function is called, it is a no-op (and -** a NULL pointer is returned). Otherwise, if an OOM error is encountered -** by this function, NULL is returned and *pRc is set to SQLITE_NOMEM. If -** no error occurs, *pRc is left unmodified. +** Discard the contents of the pending terms table. */ -static char *fts3WriteExprList(Fts3Table *p, const char *zFunc, int *pRc){ - char *zRet = 0; - char *zFree = 0; - char *zFunction; - int i; - - if( !zFunc ){ - zFunction = ""; - }else{ - zFree = zFunction = fts3QuoteId(zFunc); - } - fts3Appendf(pRc, &zRet, "?"); - for(i=0; inColumn; i++){ - fts3Appendf(pRc, &zRet, ",%s(?)", zFunction); - } - sqlite3_free(zFree); - return zRet; -} - -static int fts3GobbleInt(const char **pp, int *pnOut){ - const char *p = *pp; - int nInt = 0; - for(p=*pp; p[0]>='0' && p[0]<='9'; p++){ - nInt = nInt * 10 + (p[0] - '0'); - } - if( p==*pp ) return SQLITE_ERROR; - *pnOut = nInt; - *pp = p; +static int fts3RollbackToMethod(sqlite3_vtab *pVtab, int iSavepoint){ + Fts3Table *p = (Fts3Table*)pVtab; + UNUSED_PARAMETER(iSavepoint); + assert( p->inTransaction ); + assert( p->mxSavepoint >= iSavepoint ); + TESTONLY( p->mxSavepoint = iSavepoint ); + sqlite3Fts3PendingTermsClear(p); return SQLITE_OK; } +static const sqlite3_module fts3Module = { + /* iVersion */ 2, + /* xCreate */ fts3CreateMethod, + /* xConnect */ fts3ConnectMethod, + /* xBestIndex */ fts3BestIndexMethod, + /* xDisconnect */ fts3DisconnectMethod, + /* xDestroy */ fts3DestroyMethod, + /* xOpen */ fts3OpenMethod, + /* xClose */ fts3CloseMethod, + /* xFilter */ fts3FilterMethod, + /* xNext */ fts3NextMethod, + /* xEof */ fts3EofMethod, + /* xColumn */ fts3ColumnMethod, + /* xRowid */ fts3RowidMethod, + /* xUpdate */ fts3UpdateMethod, + /* xBegin */ fts3BeginMethod, + /* xSync */ fts3SyncMethod, + /* xCommit */ fts3CommitMethod, + /* xRollback */ fts3RollbackMethod, + /* xFindFunction */ fts3FindFunctionMethod, + /* xRename */ fts3RenameMethod, + /* xSavepoint */ fts3SavepointMethod, + /* xRelease */ fts3ReleaseMethod, + /* xRollbackTo */ fts3RollbackToMethod, +}; -static int fts3PrefixParameter( - const char *zParam, /* ABC in prefix=ABC parameter to parse */ - int *pnIndex, /* OUT: size of *apIndex[] array */ - struct Fts3Index **apIndex, /* OUT: Array of indexes for this table */ - struct Fts3Index **apFree /* OUT: Free this with sqlite3_free() */ -){ - struct Fts3Index *aIndex; - int nIndex = 1; - - if( zParam && zParam[0] ){ - const char *p; - nIndex++; - for(p=zParam; *p; p++){ - if( *p==',' ) nIndex++; - } - } - - aIndex = sqlite3_malloc(sizeof(struct Fts3Index) * nIndex); - *apIndex = *apFree = aIndex; - *pnIndex = nIndex; - if( !aIndex ){ - return SQLITE_NOMEM; - } - - memset(aIndex, 0, sizeof(struct Fts3Index) * nIndex); - if( zParam ){ - const char *p = zParam; - int i; - for(i=1; i module name ("fts3" or "fts4") -** argv[1] -> database name -** argv[2] -> table name -** argv[...] -> "column name" and other module argument fields. +** Calling sqlite3Fts3SimpleTokenizerModule() sets the value pointed +** to by the argument to point to the "simple" tokenizer implementation. +** And so on. */ -static int fts3InitVtab( - int isCreate, /* True for xCreate, false for xConnect */ - sqlite3 *db, /* The SQLite database connection */ - void *pAux, /* Hash table containing tokenizers */ - int argc, /* Number of elements in argv array */ - const char * const *argv, /* xCreate/xConnect argument array */ - sqlite3_vtab **ppVTab, /* Write the resulting vtab structure here */ - char **pzErr /* Write any error message here */ -){ - Fts3Hash *pHash = (Fts3Hash *)pAux; - Fts3Table *p = 0; /* Pointer to allocated vtab */ - int rc = SQLITE_OK; /* Return code */ - int i; /* Iterator variable */ - int nByte; /* Size of allocation used for *p */ - int iCol; /* Column index */ - int nString = 0; /* Bytes required to hold all column names */ - int nCol = 0; /* Number of columns in the FTS table */ - char *zCsr; /* Space for holding column names */ - int nDb; /* Bytes required to hold database name */ - int nName; /* Bytes required to hold table name */ - int isFts4 = (argv[0][3]=='4'); /* True for FTS4, false for FTS3 */ - const char **aCol; /* Array of column names */ - sqlite3_tokenizer *pTokenizer = 0; /* Tokenizer for this table */ +SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule); +SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule(sqlite3_tokenizer_module const**ppModule); +#ifndef SQLITE_DISABLE_FTS3_UNICODE +SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const**ppModule); +#endif +#ifdef SQLITE_ENABLE_ICU +SQLITE_PRIVATE void sqlite3Fts3IcuTokenizerModule(sqlite3_tokenizer_module const**ppModule); +#endif - int nIndex; /* Size of aIndex[] array */ - struct Fts3Index *aIndex; /* Array of indexes for this table */ - struct Fts3Index *aFree = 0; /* Free this before returning */ +/* +** Initialize the fts3 extension. If this extension is built as part +** of the sqlite library, then this function is called directly by +** SQLite. If fts3 is built as a dynamically loadable extension, this +** function is called by the sqlite3_extension_init() entry point. +*/ +SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){ + int rc = SQLITE_OK; + Fts3Hash *pHash = 0; + const sqlite3_tokenizer_module *pSimple = 0; + const sqlite3_tokenizer_module *pPorter = 0; +#ifndef SQLITE_DISABLE_FTS3_UNICODE + const sqlite3_tokenizer_module *pUnicode = 0; +#endif - /* The results of parsing supported FTS4 key=value options: */ - int bNoDocsize = 0; /* True to omit %_docsize table */ - int bDescIdx = 0; /* True to store descending indexes */ - char *zPrefix = 0; /* Prefix parameter value (or NULL) */ - char *zCompress = 0; /* compress=? parameter (or NULL) */ - char *zUncompress = 0; /* uncompress=? parameter (or NULL) */ +#ifdef SQLITE_ENABLE_ICU + const sqlite3_tokenizer_module *pIcu = 0; + sqlite3Fts3IcuTokenizerModule(&pIcu); +#endif - assert( strlen(argv[0])==4 ); - assert( (sqlite3_strnicmp(argv[0], "fts4", 4)==0 && isFts4) - || (sqlite3_strnicmp(argv[0], "fts3", 4)==0 && !isFts4) - ); +#ifndef SQLITE_DISABLE_FTS3_UNICODE + sqlite3Fts3UnicodeTokenizer(&pUnicode); +#endif - nDb = (int)strlen(argv[1]) + 1; - nName = (int)strlen(argv[2]) + 1; +#ifdef SQLITE_TEST + rc = sqlite3Fts3InitTerm(db); + if( rc!=SQLITE_OK ) return rc; +#endif - aCol = (const char **)sqlite3_malloc(sizeof(const char *) * (argc-2) ); - if( !aCol ) return SQLITE_NOMEM; - memset((void *)aCol, 0, sizeof(const char *) * (argc-2)); + rc = sqlite3Fts3InitAux(db); + if( rc!=SQLITE_OK ) return rc; - /* Loop through all of the arguments passed by the user to the FTS3/4 - ** module (i.e. all the column names and special arguments). This loop - ** does the following: - ** - ** + Figures out the number of columns the FTSX table will have, and - ** the number of bytes of space that must be allocated to store copies - ** of the column names. - ** - ** + If there is a tokenizer specification included in the arguments, - ** initializes the tokenizer pTokenizer. - */ - for(i=3; rc==SQLITE_OK && i8 - && 0==sqlite3_strnicmp(z, "tokenize", 8) - && 0==sqlite3Fts3IsIdChar(z[8]) + /* Allocate and initialize the hash-table used to store tokenizers. */ + pHash = sqlite3_malloc(sizeof(Fts3Hash)); + if( !pHash ){ + rc = SQLITE_NOMEM; + }else{ + sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); + } + + /* Load the built-in tokenizers into the hash table */ + if( rc==SQLITE_OK ){ + if( sqlite3Fts3HashInsert(pHash, "simple", 7, (void *)pSimple) + || sqlite3Fts3HashInsert(pHash, "porter", 7, (void *)pPorter) + +#ifndef SQLITE_DISABLE_FTS3_UNICODE + || sqlite3Fts3HashInsert(pHash, "unicode61", 10, (void *)pUnicode) +#endif +#ifdef SQLITE_ENABLE_ICU + || (pIcu && sqlite3Fts3HashInsert(pHash, "icu", 4, (void *)pIcu)) +#endif ){ - rc = sqlite3Fts3InitTokenizer(pHash, &z[9], &pTokenizer, pzErr); + rc = SQLITE_NOMEM; } + } - /* Check if it is an FTS4 special argument. */ - else if( isFts4 && fts3IsSpecialColumn(z, &nKey, &zVal) ){ - struct Fts4Option { - const char *zOpt; - int nOpt; - char **pzVar; - } aFts4Opt[] = { - { "matchinfo", 9, 0 }, /* 0 -> MATCHINFO */ - { "prefix", 6, 0 }, /* 1 -> PREFIX */ - { "compress", 8, 0 }, /* 2 -> COMPRESS */ - { "uncompress", 10, 0 }, /* 3 -> UNCOMPRESS */ - { "order", 5, 0 } /* 4 -> ORDER */ - }; - - int iOpt; - if( !zVal ){ - rc = SQLITE_NOMEM; - }else{ - for(iOpt=0; iOptnOpt && !sqlite3_strnicmp(z, pOp->zOpt, pOp->nOpt) ){ - break; - } - } - if( iOpt==SizeofArray(aFts4Opt) ){ - *pzErr = sqlite3_mprintf("unrecognized parameter: %s", z); - rc = SQLITE_ERROR; - }else{ - switch( iOpt ){ - case 0: /* MATCHINFO */ - if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){ - *pzErr = sqlite3_mprintf("unrecognized matchinfo: %s", zVal); - rc = SQLITE_ERROR; - } - bNoDocsize = 1; - break; +#ifdef SQLITE_TEST + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3ExprInitTestInterface(db); + } +#endif - case 1: /* PREFIX */ - sqlite3_free(zPrefix); - zPrefix = zVal; - zVal = 0; - break; + /* Create the virtual table wrapper around the hash-table and overload + ** the two scalar functions. If this is successful, register the + ** module with sqlite. + */ + if( SQLITE_OK==rc + && SQLITE_OK==(rc = sqlite3Fts3InitHashTable(db, pHash, "fts3_tokenizer")) + && SQLITE_OK==(rc = sqlite3_overload_function(db, "snippet", -1)) + && SQLITE_OK==(rc = sqlite3_overload_function(db, "offsets", 1)) + && SQLITE_OK==(rc = sqlite3_overload_function(db, "matchinfo", 1)) + && SQLITE_OK==(rc = sqlite3_overload_function(db, "matchinfo", 2)) + && SQLITE_OK==(rc = sqlite3_overload_function(db, "optimize", 1)) + ){ + rc = sqlite3_create_module_v2( + db, "fts3", &fts3Module, (void *)pHash, hashDestroy + ); + if( rc==SQLITE_OK ){ + rc = sqlite3_create_module_v2( + db, "fts4", &fts3Module, (void *)pHash, 0 + ); + } + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3InitTok(db, (void *)pHash); + } + return rc; + } - case 2: /* COMPRESS */ - sqlite3_free(zCompress); - zCompress = zVal; - zVal = 0; - break; - case 3: /* UNCOMPRESS */ - sqlite3_free(zUncompress); - zUncompress = zVal; - zVal = 0; - break; + /* An error has occurred. Delete the hash table and return the error code. */ + assert( rc!=SQLITE_OK ); + if( pHash ){ + sqlite3Fts3HashClear(pHash); + sqlite3_free(pHash); + } + return rc; +} - case 4: /* ORDER */ - if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3)) - && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 3)) - ){ - *pzErr = sqlite3_mprintf("unrecognized order: %s", zVal); - rc = SQLITE_ERROR; - } - bDescIdx = (zVal[0]=='d' || zVal[0]=='D'); - break; - } +/* +** Allocate an Fts3MultiSegReader for each token in the expression headed +** by pExpr. +** +** An Fts3SegReader object is a cursor that can seek or scan a range of +** entries within a single segment b-tree. An Fts3MultiSegReader uses multiple +** Fts3SegReader objects internally to provide an interface to seek or scan +** within the union of all segments of a b-tree. Hence the name. +** +** If the allocated Fts3MultiSegReader just seeks to a single entry in a +** segment b-tree (if the term is not a prefix or it is a prefix for which +** there exists prefix b-tree of the right length) then it may be traversed +** and merged incrementally. Otherwise, it has to be merged into an in-memory +** doclist and then traversed. +*/ +static void fts3EvalAllocateReaders( + Fts3Cursor *pCsr, /* FTS cursor handle */ + Fts3Expr *pExpr, /* Allocate readers for this expression */ + int *pnToken, /* OUT: Total number of tokens in phrase. */ + int *pnOr, /* OUT: Total number of OR nodes in expr. */ + int *pRc /* IN/OUT: Error code */ +){ + if( pExpr && SQLITE_OK==*pRc ){ + if( pExpr->eType==FTSQUERY_PHRASE ){ + int i; + int nToken = pExpr->pPhrase->nToken; + *pnToken += nToken; + for(i=0; ipPhrase->aToken[i]; + int rc = fts3TermSegReaderCursor(pCsr, + pToken->z, pToken->n, pToken->isPrefix, &pToken->pSegcsr + ); + if( rc!=SQLITE_OK ){ + *pRc = rc; + return; } - sqlite3_free(zVal); } + assert( pExpr->pPhrase->iDoclistToken==0 ); + pExpr->pPhrase->iDoclistToken = -1; + }else{ + *pnOr += (pExpr->eType==FTSQUERY_OR); + fts3EvalAllocateReaders(pCsr, pExpr->pLeft, pnToken, pnOr, pRc); + fts3EvalAllocateReaders(pCsr, pExpr->pRight, pnToken, pnOr, pRc); } - - /* Otherwise, the argument is a column name. */ - else { - nString += (int)(strlen(z) + 1); - aCol[nCol++] = z; - } - } - if( rc!=SQLITE_OK ) goto fts3_init_out; - - if( nCol==0 ){ - assert( nString==0 ); - aCol[0] = "content"; - nString = 8; - nCol = 1; } +} - if( pTokenizer==0 ){ - rc = sqlite3Fts3InitTokenizer(pHash, "simple", &pTokenizer, pzErr); - if( rc!=SQLITE_OK ) goto fts3_init_out; - } - assert( pTokenizer ); +/* +** Arguments pList/nList contain the doclist for token iToken of phrase p. +** It is merged into the main doclist stored in p->doclist.aAll/nAll. +** +** This function assumes that pList points to a buffer allocated using +** sqlite3_malloc(). This function takes responsibility for eventually +** freeing the buffer. +*/ +static void fts3EvalPhraseMergeToken( + Fts3Table *pTab, /* FTS Table pointer */ + Fts3Phrase *p, /* Phrase to merge pList/nList into */ + int iToken, /* Token pList/nList corresponds to */ + char *pList, /* Pointer to doclist */ + int nList /* Number of bytes in pList */ +){ + assert( iToken!=p->iDoclistToken ); - rc = fts3PrefixParameter(zPrefix, &nIndex, &aIndex, &aFree); - if( rc==SQLITE_ERROR ){ - assert( zPrefix ); - *pzErr = sqlite3_mprintf("error parsing prefix parameter: %s", zPrefix); + if( pList==0 ){ + sqlite3_free(p->doclist.aAll); + p->doclist.aAll = 0; + p->doclist.nAll = 0; } - if( rc!=SQLITE_OK ) goto fts3_init_out; - /* Allocate and populate the Fts3Table structure. */ - nByte = sizeof(Fts3Table) + /* Fts3Table */ - nCol * sizeof(char *) + /* azColumn */ - nIndex * sizeof(struct Fts3Index) + /* aIndex */ - nName + /* zName */ - nDb + /* zDb */ - nString; /* Space for azColumn strings */ - p = (Fts3Table*)sqlite3_malloc(nByte); - if( p==0 ){ - rc = SQLITE_NOMEM; - goto fts3_init_out; + else if( p->iDoclistToken<0 ){ + p->doclist.aAll = pList; + p->doclist.nAll = nList; } - memset(p, 0, nByte); - p->db = db; - p->nColumn = nCol; - p->nPendingData = 0; - p->azColumn = (char **)&p[1]; - p->pTokenizer = pTokenizer; - p->nMaxPendingData = FTS3_MAX_PENDING_DATA; - p->bHasDocsize = (isFts4 && bNoDocsize==0); - p->bHasStat = isFts4; - p->bDescIdx = bDescIdx; - TESTONLY( p->inTransaction = -1 ); - TESTONLY( p->mxSavepoint = -1 ); - p->aIndex = (struct Fts3Index *)&p->azColumn[nCol]; - memcpy(p->aIndex, aIndex, sizeof(struct Fts3Index) * nIndex); - p->nIndex = nIndex; - for(i=0; iaIndex[i].hPending, FTS3_HASH_STRING, 1); + else if( p->doclist.aAll==0 ){ + sqlite3_free(pList); } - /* Fill in the zName and zDb fields of the vtab structure. */ - zCsr = (char *)&p->aIndex[nIndex]; - p->zName = zCsr; - memcpy(zCsr, argv[2], nName); - zCsr += nName; - p->zDb = zCsr; - memcpy(zCsr, argv[1], nDb); - zCsr += nDb; + else { + char *pLeft; + char *pRight; + int nLeft; + int nRight; + int nDiff; - /* Fill in the azColumn array */ - for(iCol=0; iColazColumn[iCol] = zCsr; - zCsr += n+1; - assert( zCsr <= &((char *)p)[nByte] ); - } + if( p->iDoclistTokendoclist.aAll; + nLeft = p->doclist.nAll; + pRight = pList; + nRight = nList; + nDiff = iToken - p->iDoclistToken; + }else{ + pRight = p->doclist.aAll; + nRight = p->doclist.nAll; + pLeft = pList; + nLeft = nList; + nDiff = p->iDoclistToken - iToken; + } - if( (zCompress==0)!=(zUncompress==0) ){ - char const *zMiss = (zCompress==0 ? "compress" : "uncompress"); - rc = SQLITE_ERROR; - *pzErr = sqlite3_mprintf("missing %s parameter in fts4 constructor", zMiss); + fts3DoclistPhraseMerge(pTab->bDescIdx, nDiff, pLeft, nLeft, pRight,&nRight); + sqlite3_free(pLeft); + p->doclist.aAll = pRight; + p->doclist.nAll = nRight; } - p->zReadExprlist = fts3ReadExprList(p, zUncompress, &rc); - p->zWriteExprlist = fts3WriteExprList(p, zCompress, &rc); - if( rc!=SQLITE_OK ) goto fts3_init_out; - /* If this is an xCreate call, create the underlying tables in the - ** database. TODO: For xConnect(), it could verify that said tables exist. - */ - if( isCreate ){ - rc = fts3CreateTables(p); - } + if( iToken>p->iDoclistToken ) p->iDoclistToken = iToken; +} - /* Figure out the page-size for the database. This is required in order to - ** estimate the cost of loading large doclists from the database. */ - fts3DatabasePageSize(&rc, p); - p->nNodeSize = p->nPgsz-35; +/* +** Load the doclist for phrase p into p->doclist.aAll/nAll. The loaded doclist +** does not take deferred tokens into account. +** +** SQLITE_OK is returned if no error occurs, otherwise an SQLite error code. +*/ +static int fts3EvalPhraseLoad( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Phrase *p /* Phrase object */ +){ + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int iToken; + int rc = SQLITE_OK; - /* Declare the table schema to SQLite. */ - fts3DeclareVtab(&rc, p); + for(iToken=0; rc==SQLITE_OK && iTokennToken; iToken++){ + Fts3PhraseToken *pToken = &p->aToken[iToken]; + assert( pToken->pDeferred==0 || pToken->pSegcsr==0 ); -fts3_init_out: - sqlite3_free(zPrefix); - sqlite3_free(aFree); - sqlite3_free(zCompress); - sqlite3_free(zUncompress); - sqlite3_free((void *)aCol); - if( rc!=SQLITE_OK ){ - if( p ){ - fts3DisconnectMethod((sqlite3_vtab *)p); - }else if( pTokenizer ){ - pTokenizer->pModule->xDestroy(pTokenizer); + if( pToken->pSegcsr ){ + int nThis = 0; + char *pThis = 0; + rc = fts3TermSelect(pTab, pToken, p->iColumn, &nThis, &pThis); + if( rc==SQLITE_OK ){ + fts3EvalPhraseMergeToken(pTab, p, iToken, pThis, nThis); + } } - }else{ - assert( p->pSegments==0 ); - *ppVTab = &p->base; + assert( pToken->pSegcsr==0 ); } + return rc; } /* -** The xConnect() and xCreate() methods for the virtual table. All the -** work is done in function fts3InitVtab(). -*/ -static int fts3ConnectMethod( - sqlite3 *db, /* Database connection */ - void *pAux, /* Pointer to tokenizer hash table */ - int argc, /* Number of elements in argv array */ - const char * const *argv, /* xCreate/xConnect argument array */ - sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ - char **pzErr /* OUT: sqlite3_malloc'd error message */ -){ - return fts3InitVtab(0, db, pAux, argc, argv, ppVtab, pzErr); -} -static int fts3CreateMethod( - sqlite3 *db, /* Database connection */ - void *pAux, /* Pointer to tokenizer hash table */ - int argc, /* Number of elements in argv array */ - const char * const *argv, /* xCreate/xConnect argument array */ - sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ - char **pzErr /* OUT: sqlite3_malloc'd error message */ -){ - return fts3InitVtab(1, db, pAux, argc, argv, ppVtab, pzErr); -} - -/* -** Implementation of the xBestIndex method for FTS3 tables. There -** are three possible strategies, in order of preference: +** This function is called on each phrase after the position lists for +** any deferred tokens have been loaded into memory. It updates the phrases +** current position list to include only those positions that are really +** instances of the phrase (after considering deferred tokens). If this +** means that the phrase does not appear in the current row, doclist.pList +** and doclist.nList are both zeroed. ** -** 1. Direct lookup by rowid or docid. -** 2. Full-text search using a MATCH operator on a non-docid column. -** 3. Linear scan of %_content table. +** SQLITE_OK is returned if no error occurs, otherwise an SQLite error code. */ -static int fts3BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){ - Fts3Table *p = (Fts3Table *)pVTab; - int i; /* Iterator variable */ - int iCons = -1; /* Index of constraint to use */ +static int fts3EvalDeferredPhrase(Fts3Cursor *pCsr, Fts3Phrase *pPhrase){ + int iToken; /* Used to iterate through phrase tokens */ + char *aPoslist = 0; /* Position list for deferred tokens */ + int nPoslist = 0; /* Number of bytes in aPoslist */ + int iPrev = -1; /* Token number of previous deferred token */ - /* By default use a full table scan. This is an expensive option, - ** so search through the constraints to see if a more efficient - ** strategy is possible. - */ - pInfo->idxNum = FTS3_FULLSCAN_SEARCH; - pInfo->estimatedCost = 500000; - for(i=0; inConstraint; i++){ - struct sqlite3_index_constraint *pCons = &pInfo->aConstraint[i]; - if( pCons->usable==0 ) continue; + assert( pPhrase->doclist.bFreeList==0 ); - /* A direct lookup on the rowid or docid column. Assign a cost of 1.0. */ - if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ - && (pCons->iColumn<0 || pCons->iColumn==p->nColumn+1 ) - ){ - pInfo->idxNum = FTS3_DOCID_SEARCH; - pInfo->estimatedCost = 1.0; - iCons = i; - } + for(iToken=0; iTokennToken; iToken++){ + Fts3PhraseToken *pToken = &pPhrase->aToken[iToken]; + Fts3DeferredToken *pDeferred = pToken->pDeferred; - /* A MATCH constraint. Use a full-text search. - ** - ** If there is more than one MATCH constraint available, use the first - ** one encountered. If there is both a MATCH constraint and a direct - ** rowid/docid lookup, prefer the MATCH strategy. This is done even - ** though the rowid/docid lookup is faster than a MATCH query, selecting - ** it would lead to an "unable to use function MATCH in the requested - ** context" error. - */ - if( pCons->op==SQLITE_INDEX_CONSTRAINT_MATCH - && pCons->iColumn>=0 && pCons->iColumn<=p->nColumn - ){ - pInfo->idxNum = FTS3_FULLTEXT_SEARCH + pCons->iColumn; - pInfo->estimatedCost = 2.0; - iCons = i; - break; - } - } + if( pDeferred ){ + char *pList; + int nList; + int rc = sqlite3Fts3DeferredTokenList(pDeferred, &pList, &nList); + if( rc!=SQLITE_OK ) return rc; - if( iCons>=0 ){ - pInfo->aConstraintUsage[iCons].argvIndex = 1; - pInfo->aConstraintUsage[iCons].omit = 1; - } + if( pList==0 ){ + sqlite3_free(aPoslist); + pPhrase->doclist.pList = 0; + pPhrase->doclist.nList = 0; + return SQLITE_OK; + + }else if( aPoslist==0 ){ + aPoslist = pList; + nPoslist = nList; - /* Regardless of the strategy selected, FTS can deliver rows in rowid (or - ** docid) order. Both ascending and descending are possible. - */ - if( pInfo->nOrderBy==1 ){ - struct sqlite3_index_orderby *pOrder = &pInfo->aOrderBy[0]; - if( pOrder->iColumn<0 || pOrder->iColumn==p->nColumn+1 ){ - if( pOrder->desc ){ - pInfo->idxStr = "DESC"; }else{ - pInfo->idxStr = "ASC"; + char *aOut = pList; + char *p1 = aPoslist; + char *p2 = aOut; + + assert( iPrev>=0 ); + fts3PoslistPhraseMerge(&aOut, iToken-iPrev, 0, 1, &p1, &p2); + sqlite3_free(aPoslist); + aPoslist = pList; + nPoslist = (int)(aOut - aPoslist); + if( nPoslist==0 ){ + sqlite3_free(aPoslist); + pPhrase->doclist.pList = 0; + pPhrase->doclist.nList = 0; + return SQLITE_OK; + } } - pInfo->orderByConsumed = 1; + iPrev = iToken; } } - assert( p->pSegments==0 ); - return SQLITE_OK; -} - -/* -** Implementation of xOpen method. -*/ -static int fts3OpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ - sqlite3_vtab_cursor *pCsr; /* Allocated cursor */ + if( iPrev>=0 ){ + int nMaxUndeferred = pPhrase->iDoclistToken; + if( nMaxUndeferred<0 ){ + pPhrase->doclist.pList = aPoslist; + pPhrase->doclist.nList = nPoslist; + pPhrase->doclist.iDocid = pCsr->iPrevId; + pPhrase->doclist.bFreeList = 1; + }else{ + int nDistance; + char *p1; + char *p2; + char *aOut; - UNUSED_PARAMETER(pVTab); + if( nMaxUndeferred>iPrev ){ + p1 = aPoslist; + p2 = pPhrase->doclist.pList; + nDistance = nMaxUndeferred - iPrev; + }else{ + p1 = pPhrase->doclist.pList; + p2 = aPoslist; + nDistance = iPrev - nMaxUndeferred; + } - /* Allocate a buffer large enough for an Fts3Cursor structure. If the - ** allocation succeeds, zero it and return SQLITE_OK. Otherwise, - ** if the allocation fails, return SQLITE_NOMEM. - */ - *ppCsr = pCsr = (sqlite3_vtab_cursor *)sqlite3_malloc(sizeof(Fts3Cursor)); - if( !pCsr ){ - return SQLITE_NOMEM; + aOut = (char *)sqlite3_malloc(nPoslist+8); + if( !aOut ){ + sqlite3_free(aPoslist); + return SQLITE_NOMEM; + } + + pPhrase->doclist.pList = aOut; + if( fts3PoslistPhraseMerge(&aOut, nDistance, 0, 1, &p1, &p2) ){ + pPhrase->doclist.bFreeList = 1; + pPhrase->doclist.nList = (int)(aOut - pPhrase->doclist.pList); + }else{ + sqlite3_free(aOut); + pPhrase->doclist.pList = 0; + pPhrase->doclist.nList = 0; + } + sqlite3_free(aPoslist); + } } - memset(pCsr, 0, sizeof(Fts3Cursor)); + return SQLITE_OK; } /* -** Close the cursor. For additional information see the documentation -** on the xClose method of the virtual table interface. +** Maximum number of tokens a phrase may have to be considered for the +** incremental doclists strategy. */ -static int fts3CloseMethod(sqlite3_vtab_cursor *pCursor){ - Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; - assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); - sqlite3_finalize(pCsr->pStmt); - sqlite3Fts3ExprFree(pCsr->pExpr); - sqlite3Fts3FreeDeferredTokens(pCsr); - sqlite3_free(pCsr->aDoclist); - sqlite3_free(pCsr->aMatchinfo); - assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); - sqlite3_free(pCsr); - return SQLITE_OK; -} +#define MAX_INCR_PHRASE_TOKENS 4 /* -** Position the pCsr->pStmt statement so that it is on the row -** of the %_content table that contains the last match. Return -** SQLITE_OK on success. +** This function is called for each Fts3Phrase in a full-text query +** expression to initialize the mechanism for returning rows. Once this +** function has been called successfully on an Fts3Phrase, it may be +** used with fts3EvalPhraseNext() to iterate through the matching docids. +** +** If parameter bOptOk is true, then the phrase may (or may not) use the +** incremental loading strategy. Otherwise, the entire doclist is loaded into +** memory within this call. +** +** SQLITE_OK is returned if no error occurs, otherwise an SQLite error code. */ -static int fts3CursorSeek(sqlite3_context *pContext, Fts3Cursor *pCsr){ - if( pCsr->isRequireSeek ){ - sqlite3_bind_int64(pCsr->pStmt, 1, pCsr->iPrevId); - pCsr->isRequireSeek = 0; - if( SQLITE_ROW==sqlite3_step(pCsr->pStmt) ){ - return SQLITE_OK; - }else{ - int rc = sqlite3_reset(pCsr->pStmt); - if( rc==SQLITE_OK ){ - /* If no row was found and no error has occured, then the %_content - ** table is missing a row that is present in the full-text index. - ** The data structures are corrupt. - */ - rc = SQLITE_CORRUPT_VTAB; - } - pCsr->isEof = 1; - if( pContext ){ - sqlite3_result_error_code(pContext, rc); +static int fts3EvalPhraseStart(Fts3Cursor *pCsr, int bOptOk, Fts3Phrase *p){ + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int rc = SQLITE_OK; /* Error code */ + int i; + + /* Determine if doclists may be loaded from disk incrementally. This is + ** possible if the bOptOk argument is true, the FTS doclists will be + ** scanned in forward order, and the phrase consists of + ** MAX_INCR_PHRASE_TOKENS or fewer tokens, none of which are are "^first" + ** tokens or prefix tokens that cannot use a prefix-index. */ + int bHaveIncr = 0; + int bIncrOk = (bOptOk + && pCsr->bDesc==pTab->bDescIdx + && p->nToken<=MAX_INCR_PHRASE_TOKENS && p->nToken>0 + && p->nToken<=MAX_INCR_PHRASE_TOKENS && p->nToken>0 +#ifdef SQLITE_TEST + && pTab->bNoIncrDoclist==0 +#endif + ); + for(i=0; bIncrOk==1 && inToken; i++){ + Fts3PhraseToken *pToken = &p->aToken[i]; + if( pToken->bFirst || (pToken->pSegcsr!=0 && !pToken->pSegcsr->bLookup) ){ + bIncrOk = 0; + } + if( pToken->pSegcsr ) bHaveIncr = 1; + } + + if( bIncrOk && bHaveIncr ){ + /* Use the incremental approach. */ + int iCol = (p->iColumn >= pTab->nColumn ? -1 : p->iColumn); + for(i=0; rc==SQLITE_OK && inToken; i++){ + Fts3PhraseToken *pToken = &p->aToken[i]; + Fts3MultiSegReader *pSegcsr = pToken->pSegcsr; + if( pSegcsr ){ + rc = sqlite3Fts3MsrIncrStart(pTab, pSegcsr, iCol, pToken->z, pToken->n); } - return rc; } + p->bIncr = 1; }else{ - return SQLITE_OK; + /* Load the full doclist for the phrase into memory. */ + rc = fts3EvalPhraseLoad(pCsr, p); + p->bIncr = 0; } + + assert( rc!=SQLITE_OK || p->nToken<1 || p->aToken[0].pSegcsr==0 || p->bIncr ); + return rc; } /* -** This function is used to process a single interior node when searching -** a b-tree for a term or term prefix. The node data is passed to this -** function via the zNode/nNode parameters. The term to search for is -** passed in zTerm/nTerm. -** -** If piFirst is not NULL, then this function sets *piFirst to the blockid -** of the child node that heads the sub-tree that may contain the term. -** -** If piLast is not NULL, then *piLast is set to the right-most child node -** that heads a sub-tree that may contain a term for which zTerm/nTerm is -** a prefix. +** This function is used to iterate backwards (from the end to start) +** through doclists. It is used by this module to iterate through phrase +** doclists in reverse and by the fts3_write.c module to iterate through +** pending-terms lists when writing to databases with "order=desc". ** -** If an OOM error occurs, SQLITE_NOMEM is returned. Otherwise, SQLITE_OK. +** The doclist may be sorted in ascending (parameter bDescIdx==0) or +** descending (parameter bDescIdx==1) order of docid. Regardless, this +** function iterates from the end of the doclist to the beginning. */ -static int fts3ScanInteriorNode( - const char *zTerm, /* Term to select leaves for */ - int nTerm, /* Size of term zTerm in bytes */ - const char *zNode, /* Buffer containing segment interior node */ - int nNode, /* Size of buffer at zNode */ - sqlite3_int64 *piFirst, /* OUT: Selected child node */ - sqlite3_int64 *piLast /* OUT: Selected child node */ +SQLITE_PRIVATE void sqlite3Fts3DoclistPrev( + int bDescIdx, /* True if the doclist is desc */ + char *aDoclist, /* Pointer to entire doclist */ + int nDoclist, /* Length of aDoclist in bytes */ + char **ppIter, /* IN/OUT: Iterator pointer */ + sqlite3_int64 *piDocid, /* IN/OUT: Docid pointer */ + int *pnList, /* OUT: List length pointer */ + u8 *pbEof /* OUT: End-of-file flag */ ){ - int rc = SQLITE_OK; /* Return code */ - const char *zCsr = zNode; /* Cursor to iterate through node */ - const char *zEnd = &zCsr[nNode];/* End of interior node buffer */ - char *zBuffer = 0; /* Buffer to load terms into */ - int nAlloc = 0; /* Size of allocated buffer */ - int isFirstTerm = 1; /* True when processing first term on page */ - sqlite3_int64 iChild; /* Block id of child node to descend to */ + char *p = *ppIter; - /* Skip over the 'height' varint that occurs at the start of every - ** interior node. Then load the blockid of the left-child of the b-tree - ** node into variable iChild. - ** - ** Even if the data structure on disk is corrupted, this (reading two - ** varints from the buffer) does not risk an overread. If zNode is a - ** root node, then the buffer comes from a SELECT statement. SQLite does - ** not make this guarantee explicitly, but in practice there are always - ** either more than 20 bytes of allocated space following the nNode bytes of - ** contents, or two zero bytes. Or, if the node is read from the %_segments - ** table, then there are always 20 bytes of zeroed padding following the - ** nNode bytes of content (see sqlite3Fts3ReadBlock() for details). - */ - zCsr += sqlite3Fts3GetVarint(zCsr, &iChild); - zCsr += sqlite3Fts3GetVarint(zCsr, &iChild); - if( zCsr>zEnd ){ - return SQLITE_CORRUPT_VTAB; - } - - while( zCsrzEnd ){ - rc = SQLITE_CORRUPT_VTAB; - goto finish_scan; + assert( nDoclist>0 ); + assert( *pbEof==0 ); + assert( p || *piDocid==0 ); + assert( !p || (p>aDoclist && p<&aDoclist[nDoclist]) ); + + if( p==0 ){ + sqlite3_int64 iDocid = 0; + char *pNext = 0; + char *pDocid = aDoclist; + char *pEnd = &aDoclist[nDoclist]; + int iMul = 1; + + while( pDocidnAlloc ){ - char *zNew; - nAlloc = (nPrefix+nSuffix) * 2; - zNew = (char *)sqlite3_realloc(zBuffer, nAlloc); - if( !zNew ){ - rc = SQLITE_NOMEM; - goto finish_scan; - } - zBuffer = zNew; + + *pnList = (int)(pEnd - pNext); + *ppIter = pNext; + *piDocid = iDocid; + }else{ + int iMul = (bDescIdx ? -1 : 1); + sqlite3_int64 iDelta; + fts3GetReverseVarint(&p, aDoclist, &iDelta); + *piDocid -= (iMul * iDelta); + + if( p==aDoclist ){ + *pbEof = 1; + }else{ + char *pSave = p; + fts3ReversePoslist(aDoclist, &p); + *pnList = (int)(pSave - p); } - memcpy(&zBuffer[nPrefix], zCsr, nSuffix); - nBuffer = nPrefix + nSuffix; - zCsr += nSuffix; + *ppIter = p; + } +} - /* Compare the term we are searching for with the term just loaded from - ** the interior node. If the specified term is greater than or equal - ** to the term from the interior node, then all terms on the sub-tree - ** headed by node iChild are smaller than zTerm. No need to search - ** iChild. - ** - ** If the interior node term is larger than the specified term, then - ** the tree headed by iChild may contain the specified term. - */ - cmp = memcmp(zTerm, zBuffer, (nBuffer>nTerm ? nTerm : nBuffer)); - if( piFirst && (cmp<0 || (cmp==0 && nBuffer>nTerm)) ){ - *piFirst = iChild; - piFirst = 0; +/* +** Iterate forwards through a doclist. +*/ +SQLITE_PRIVATE void sqlite3Fts3DoclistNext( + int bDescIdx, /* True if the doclist is desc */ + char *aDoclist, /* Pointer to entire doclist */ + int nDoclist, /* Length of aDoclist in bytes */ + char **ppIter, /* IN/OUT: Iterator pointer */ + sqlite3_int64 *piDocid, /* IN/OUT: Docid pointer */ + u8 *pbEof /* OUT: End-of-file flag */ +){ + char *p = *ppIter; + + assert( nDoclist>0 ); + assert( *pbEof==0 ); + assert( p || *piDocid==0 ); + assert( !p || (p>=aDoclist && p<=&aDoclist[nDoclist]) ); + + if( p==0 ){ + p = aDoclist; + p += sqlite3Fts3GetVarint(p, piDocid); + }else{ + fts3PoslistCopy(0, &p); + if( p>=&aDoclist[nDoclist] ){ + *pbEof = 1; + }else{ + sqlite3_int64 iVar; + p += sqlite3Fts3GetVarint(p, &iVar); + *piDocid += ((bDescIdx ? -1 : 1) * iVar); } + } - if( piLast && cmp<0 ){ - *piLast = iChild; - piLast = 0; + *ppIter = p; +} + +/* +** Advance the iterator pDL to the next entry in pDL->aAll/nAll. Set *pbEof +** to true if EOF is reached. +*/ +static void fts3EvalDlPhraseNext( + Fts3Table *pTab, + Fts3Doclist *pDL, + u8 *pbEof +){ + char *pIter; /* Used to iterate through aAll */ + char *pEnd = &pDL->aAll[pDL->nAll]; /* 1 byte past end of aAll */ + + if( pDL->pNextDocid ){ + pIter = pDL->pNextDocid; + }else{ + pIter = pDL->aAll; + } + + if( pIter>=pEnd ){ + /* We have already reached the end of this doclist. EOF. */ + *pbEof = 1; + }else{ + sqlite3_int64 iDelta; + pIter += sqlite3Fts3GetVarint(pIter, &iDelta); + if( pTab->bDescIdx==0 || pDL->pNextDocid==0 ){ + pDL->iDocid += iDelta; + }else{ + pDL->iDocid -= iDelta; } + pDL->pList = pIter; + fts3PoslistCopy(0, &pIter); + pDL->nList = (int)(pIter - pDL->pList); - iChild++; - }; + /* pIter now points just past the 0x00 that terminates the position- + ** list for document pDL->iDocid. However, if this position-list was + ** edited in place by fts3EvalNearTrim(), then pIter may not actually + ** point to the start of the next docid value. The following line deals + ** with this case by advancing pIter past the zero-padding added by + ** fts3EvalNearTrim(). */ + while( pIterpNextDocid = pIter; + assert( pIter>=&pDL->aAll[pDL->nAll] || *pIter ); + *pbEof = 0; + } +} + +/* +** Helper type used by fts3EvalIncrPhraseNext() and incrPhraseTokenNext(). +*/ +typedef struct TokenDoclist TokenDoclist; +struct TokenDoclist { + int bIgnore; + sqlite3_int64 iDocid; + char *pList; + int nList; +}; + +/* +** Token pToken is an incrementally loaded token that is part of a +** multi-token phrase. Advance it to the next matching document in the +** database and populate output variable *p with the details of the new +** entry. Or, if the iterator has reached EOF, set *pbEof to true. +** +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. +*/ +static int incrPhraseTokenNext( + Fts3Table *pTab, /* Virtual table handle */ + Fts3Phrase *pPhrase, /* Phrase to advance token of */ + int iToken, /* Specific token to advance */ + TokenDoclist *p, /* OUT: Docid and doclist for new entry */ + u8 *pbEof /* OUT: True if iterator is at EOF */ +){ + int rc = SQLITE_OK; + + if( pPhrase->iDoclistToken==iToken ){ + assert( p->bIgnore==0 ); + assert( pPhrase->aToken[iToken].pSegcsr==0 ); + fts3EvalDlPhraseNext(pTab, &pPhrase->doclist, pbEof); + p->pList = pPhrase->doclist.pList; + p->nList = pPhrase->doclist.nList; + p->iDocid = pPhrase->doclist.iDocid; + }else{ + Fts3PhraseToken *pToken = &pPhrase->aToken[iToken]; + assert( pToken->pDeferred==0 ); + assert( pToken->pSegcsr || pPhrase->iDoclistToken>=0 ); + if( pToken->pSegcsr ){ + assert( p->bIgnore==0 ); + rc = sqlite3Fts3MsrIncrNext( + pTab, pToken->pSegcsr, &p->iDocid, &p->pList, &p->nList + ); + if( p->pList==0 ) *pbEof = 1; + }else{ + p->bIgnore = 1; + } + } - finish_scan: - sqlite3_free(zBuffer); return rc; } /* -** The buffer pointed to by argument zNode (size nNode bytes) contains an -** interior node of a b-tree segment. The zTerm buffer (size nTerm bytes) -** contains a term. This function searches the sub-tree headed by the zNode -** node for the range of leaf nodes that may contain the specified term -** or terms for which the specified term is a prefix. +** The phrase iterator passed as the second argument: ** -** If piLeaf is not NULL, then *piLeaf is set to the blockid of the -** left-most leaf node in the tree that may contain the specified term. -** If piLeaf2 is not NULL, then *piLeaf2 is set to the blockid of the -** right-most leaf node that may contain a term for which the specified -** term is a prefix. +** * features at least one token that uses an incremental doclist, and ** -** It is possible that the range of returned leaf nodes does not contain -** the specified term or any terms for which it is a prefix. However, if the -** segment does contain any such terms, they are stored within the identified -** range. Because this function only inspects interior segment nodes (and -** never loads leaf nodes into memory), it is not possible to be sure. +** * does not contain any deferred tokens. ** -** If an error occurs, an error code other than SQLITE_OK is returned. -*/ -static int fts3SelectLeaf( - Fts3Table *p, /* Virtual table handle */ - const char *zTerm, /* Term to select leaves for */ - int nTerm, /* Size of term zTerm in bytes */ - const char *zNode, /* Buffer containing segment interior node */ - int nNode, /* Size of buffer at zNode */ - sqlite3_int64 *piLeaf, /* Selected leaf node */ - sqlite3_int64 *piLeaf2 /* Selected leaf node */ +** Advance it to the next matching documnent in the database and populate +** the Fts3Doclist.pList and nList fields. +** +** If there is no "next" entry and no error occurs, then *pbEof is set to +** 1 before returning. Otherwise, if no error occurs and the iterator is +** successfully advanced, *pbEof is set to 0. +** +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. +*/ +static int fts3EvalIncrPhraseNext( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Phrase *p, /* Phrase object to advance to next docid */ + u8 *pbEof /* OUT: Set to 1 if EOF */ ){ - int rc; /* Return code */ - int iHeight; /* Height of this node in tree */ - - assert( piLeaf || piLeaf2 ); + int rc = SQLITE_OK; + Fts3Doclist *pDL = &p->doclist; + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + u8 bEof = 0; - sqlite3Fts3GetVarint32(zNode, &iHeight); - rc = fts3ScanInteriorNode(zTerm, nTerm, zNode, nNode, piLeaf, piLeaf2); - assert( !piLeaf2 || !piLeaf || rc!=SQLITE_OK || (*piLeaf<=*piLeaf2) ); + /* This is only called if it is guaranteed that the phrase has at least + ** one incremental token. In which case the bIncr flag is set. */ + assert( p->bIncr==1 ); - if( rc==SQLITE_OK && iHeight>1 ){ - char *zBlob = 0; /* Blob read from %_segments table */ - int nBlob; /* Size of zBlob in bytes */ + if( p->nToken==1 && p->bIncr ){ + rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr, + &pDL->iDocid, &pDL->pList, &pDL->nList + ); + if( pDL->pList==0 ) bEof = 1; + }else{ + int bDescDoclist = pCsr->bDesc; + struct TokenDoclist a[MAX_INCR_PHRASE_TOKENS]; + + memset(a, 0, sizeof(a)); + assert( p->nToken<=MAX_INCR_PHRASE_TOKENS ); + assert( p->iDoclistTokennToken && bEof==0; i++){ + rc = incrPhraseTokenNext(pTab, p, i, &a[i], &bEof); + if( a[i].bIgnore==0 && (bMaxSet==0 || DOCID_CMP(iMax, a[i].iDocid)<0) ){ + iMax = a[i].iDocid; + bMaxSet = 1; + } + } + assert( rc!=SQLITE_OK || (p->nToken>=1 && a[p->nToken-1].bIgnore==0) ); + assert( rc!=SQLITE_OK || bMaxSet ); - if( piLeaf && piLeaf2 && (*piLeaf!=*piLeaf2) ){ - rc = sqlite3Fts3ReadBlock(p, *piLeaf, &zBlob, &nBlob, 0); - if( rc==SQLITE_OK ){ - rc = fts3SelectLeaf(p, zTerm, nTerm, zBlob, nBlob, piLeaf, 0); + /* Keep advancing iterators until they all point to the same document */ + for(i=0; inToken; i++){ + while( rc==SQLITE_OK && bEof==0 + && a[i].bIgnore==0 && DOCID_CMP(a[i].iDocid, iMax)<0 + ){ + rc = incrPhraseTokenNext(pTab, p, i, &a[i], &bEof); + if( DOCID_CMP(a[i].iDocid, iMax)>0 ){ + iMax = a[i].iDocid; + i = 0; + } + } } - sqlite3_free(zBlob); - piLeaf = 0; - zBlob = 0; - } - if( rc==SQLITE_OK ){ - rc = sqlite3Fts3ReadBlock(p, piLeaf?*piLeaf:*piLeaf2, &zBlob, &nBlob, 0); - } - if( rc==SQLITE_OK ){ - rc = fts3SelectLeaf(p, zTerm, nTerm, zBlob, nBlob, piLeaf, piLeaf2); + /* Check if the current entries really are a phrase match */ + if( bEof==0 ){ + int nList = 0; + int nByte = a[p->nToken-1].nList; + char *aDoclist = sqlite3_malloc(nByte+1); + if( !aDoclist ) return SQLITE_NOMEM; + memcpy(aDoclist, a[p->nToken-1].pList, nByte+1); + + for(i=0; i<(p->nToken-1); i++){ + if( a[i].bIgnore==0 ){ + char *pL = a[i].pList; + char *pR = aDoclist; + char *pOut = aDoclist; + int nDist = p->nToken-1-i; + int res = fts3PoslistPhraseMerge(&pOut, nDist, 0, 1, &pL, &pR); + if( res==0 ) break; + nList = (int)(pOut - aDoclist); + } + } + if( i==(p->nToken-1) ){ + pDL->iDocid = iMax; + pDL->pList = aDoclist; + pDL->nList = nList; + pDL->bFreeList = 1; + break; + } + sqlite3_free(aDoclist); + } } - sqlite3_free(zBlob); } + *pbEof = bEof; return rc; } /* -** This function is used to create delta-encoded serialized lists of FTS3 -** varints. Each call to this function appends a single varint to a list. -*/ -static void fts3PutDeltaVarint( - char **pp, /* IN/OUT: Output pointer */ - sqlite3_int64 *piPrev, /* IN/OUT: Previous value written to list */ - sqlite3_int64 iVal /* Write this value to the list */ -){ - assert( iVal-*piPrev > 0 || (*piPrev==0 && iVal==0) ); - *pp += sqlite3Fts3PutVarint(*pp, iVal-*piPrev); - *piPrev = iVal; -} - -/* -** When this function is called, *ppPoslist is assumed to point to the -** start of a position-list. After it returns, *ppPoslist points to the -** first byte after the position-list. -** -** A position list is list of positions (delta encoded) and columns for -** a single document record of a doclist. So, in other words, this -** routine advances *ppPoslist so that it points to the next docid in -** the doclist, or to the first byte past the end of the doclist. +** Attempt to move the phrase iterator to point to the next matching docid. +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. ** -** If pp is not NULL, then the contents of the position list are copied -** to *pp. *pp is set to point to the first byte past the last byte copied -** before this function returns. +** If there is no "next" entry and no error occurs, then *pbEof is set to +** 1 before returning. Otherwise, if no error occurs and the iterator is +** successfully advanced, *pbEof is set to 0. */ -static void fts3PoslistCopy(char **pp, char **ppPoslist){ - char *pEnd = *ppPoslist; - char c = 0; +static int fts3EvalPhraseNext( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Phrase *p, /* Phrase object to advance to next docid */ + u8 *pbEof /* OUT: Set to 1 if EOF */ +){ + int rc = SQLITE_OK; + Fts3Doclist *pDL = &p->doclist; + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - /* The end of a position list is marked by a zero encoded as an FTS3 - ** varint. A single POS_END (0) byte. Except, if the 0 byte is preceded by - ** a byte with the 0x80 bit set, then it is not a varint 0, but the tail - ** of some other, multi-byte, value. - ** - ** The following while-loop moves pEnd to point to the first byte that is not - ** immediately preceded by a byte with the 0x80 bit set. Then increments - ** pEnd once more so that it points to the byte immediately following the - ** last byte in the position-list. - */ - while( *pEnd | c ){ - c = *pEnd++ & 0x80; - testcase( c!=0 && (*pEnd)==0 ); + if( p->bIncr ){ + rc = fts3EvalIncrPhraseNext(pCsr, p, pbEof); + }else if( pCsr->bDesc!=pTab->bDescIdx && pDL->nAll ){ + sqlite3Fts3DoclistPrev(pTab->bDescIdx, pDL->aAll, pDL->nAll, + &pDL->pNextDocid, &pDL->iDocid, &pDL->nList, pbEof + ); + pDL->pList = pDL->pNextDocid; + }else{ + fts3EvalDlPhraseNext(pTab, pDL, pbEof); } - pEnd++; /* Advance past the POS_END terminator byte */ - if( pp ){ - int n = (int)(pEnd - *ppPoslist); - char *p = *pp; - memcpy(p, *ppPoslist, n); - p += n; - *pp = p; - } - *ppPoslist = pEnd; + return rc; } /* -** When this function is called, *ppPoslist is assumed to point to the -** start of a column-list. After it returns, *ppPoslist points to the -** to the terminator (POS_COLUMN or POS_END) byte of the column-list. ** -** A column-list is list of delta-encoded positions for a single column -** within a single document within a doclist. +** If *pRc is not SQLITE_OK when this function is called, it is a no-op. +** Otherwise, fts3EvalPhraseStart() is called on all phrases within the +** expression. Also the Fts3Expr.bDeferred variable is set to true for any +** expressions for which all descendent tokens are deferred. ** -** The column-list is terminated either by a POS_COLUMN varint (1) or -** a POS_END varint (0). This routine leaves *ppPoslist pointing to -** the POS_COLUMN or POS_END that terminates the column-list. +** If parameter bOptOk is zero, then it is guaranteed that the +** Fts3Phrase.doclist.aAll/nAll variables contain the entire doclist for +** each phrase in the expression (subject to deferred token processing). +** Or, if bOptOk is non-zero, then one or more tokens within the expression +** may be loaded incrementally, meaning doclist.aAll/nAll is not available. ** -** If pp is not NULL, then the contents of the column-list are copied -** to *pp. *pp is set to point to the first byte past the last byte copied -** before this function returns. The POS_COLUMN or POS_END terminator -** is not copied into *pp. +** If an error occurs within this function, *pRc is set to an SQLite error +** code before returning. */ -static void fts3ColumnlistCopy(char **pp, char **ppPoslist){ - char *pEnd = *ppPoslist; - char c = 0; - - /* A column-list is terminated by either a 0x01 or 0x00 byte that is - ** not part of a multi-byte varint. - */ - while( 0xFE & (*pEnd | c) ){ - c = *pEnd++ & 0x80; - testcase( c!=0 && ((*pEnd)&0xfe)==0 ); - } - if( pp ){ - int n = (int)(pEnd - *ppPoslist); - char *p = *pp; - memcpy(p, *ppPoslist, n); - p += n; - *pp = p; +static void fts3EvalStartReaders( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Expr *pExpr, /* Expression to initialize phrases in */ + int *pRc /* IN/OUT: Error code */ +){ + if( pExpr && SQLITE_OK==*pRc ){ + if( pExpr->eType==FTSQUERY_PHRASE ){ + int i; + int nToken = pExpr->pPhrase->nToken; + for(i=0; ipPhrase->aToken[i].pDeferred==0 ) break; + } + pExpr->bDeferred = (i==nToken); + *pRc = fts3EvalPhraseStart(pCsr, 1, pExpr->pPhrase); + }else{ + fts3EvalStartReaders(pCsr, pExpr->pLeft, pRc); + fts3EvalStartReaders(pCsr, pExpr->pRight, pRc); + pExpr->bDeferred = (pExpr->pLeft->bDeferred && pExpr->pRight->bDeferred); + } } - *ppPoslist = pEnd; } /* -** Value used to signify the end of an position-list. This is safe because -** it is not possible to have a document with 2^31 terms. +** An array of the following structures is assembled as part of the process +** of selecting tokens to defer before the query starts executing (as part +** of the xFilter() method). There is one element in the array for each +** token in the FTS expression. +** +** Tokens are divided into AND/NEAR clusters. All tokens in a cluster belong +** to phrases that are connected only by AND and NEAR operators (not OR or +** NOT). When determining tokens to defer, each AND/NEAR cluster is considered +** separately. The root of a tokens AND/NEAR cluster is stored in +** Fts3TokenAndCost.pRoot. */ -#define POSITION_LIST_END 0x7fffffff +typedef struct Fts3TokenAndCost Fts3TokenAndCost; +struct Fts3TokenAndCost { + Fts3Phrase *pPhrase; /* The phrase the token belongs to */ + int iToken; /* Position of token in phrase */ + Fts3PhraseToken *pToken; /* The token itself */ + Fts3Expr *pRoot; /* Root of NEAR/AND cluster */ + int nOvfl; /* Number of overflow pages to load doclist */ + int iCol; /* The column the token must match */ +}; /* -** This function is used to help parse position-lists. When this function is -** called, *pp may point to the start of the next varint in the position-list -** being parsed, or it may point to 1 byte past the end of the position-list -** (in which case **pp will be a terminator bytes POS_END (0) or -** (1)). -** -** If *pp points past the end of the current position-list, set *pi to -** POSITION_LIST_END and return. Otherwise, read the next varint from *pp, -** increment the current value of *pi by the value read, and set *pp to -** point to the next value before returning. +** This function is used to populate an allocated Fts3TokenAndCost array. ** -** Before calling this routine *pi must be initialized to the value of -** the previous position, or zero if we are reading the first position -** in the position-list. Because positions are delta-encoded, the value -** of the previous position is needed in order to compute the value of -** the next position. +** If *pRc is not SQLITE_OK when this function is called, it is a no-op. +** Otherwise, if an error occurs during execution, *pRc is set to an +** SQLite error code. */ -static void fts3ReadNextPos( - char **pp, /* IN/OUT: Pointer into position-list buffer */ - sqlite3_int64 *pi /* IN/OUT: Value read from position-list */ +static void fts3EvalTokenCosts( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Expr *pRoot, /* Root of current AND/NEAR cluster */ + Fts3Expr *pExpr, /* Expression to consider */ + Fts3TokenAndCost **ppTC, /* Write new entries to *(*ppTC)++ */ + Fts3Expr ***ppOr, /* Write new OR root to *(*ppOr)++ */ + int *pRc /* IN/OUT: Error code */ ){ - if( (**pp)&0xFE ){ - fts3GetDeltaVarint(pp, pi); - *pi -= 2; - }else{ - *pi = POSITION_LIST_END; + if( *pRc==SQLITE_OK ){ + if( pExpr->eType==FTSQUERY_PHRASE ){ + Fts3Phrase *pPhrase = pExpr->pPhrase; + int i; + for(i=0; *pRc==SQLITE_OK && inToken; i++){ + Fts3TokenAndCost *pTC = (*ppTC)++; + pTC->pPhrase = pPhrase; + pTC->iToken = i; + pTC->pRoot = pRoot; + pTC->pToken = &pPhrase->aToken[i]; + pTC->iCol = pPhrase->iColumn; + *pRc = sqlite3Fts3MsrOvfl(pCsr, pTC->pToken->pSegcsr, &pTC->nOvfl); + } + }else if( pExpr->eType!=FTSQUERY_NOT ){ + assert( pExpr->eType==FTSQUERY_OR + || pExpr->eType==FTSQUERY_AND + || pExpr->eType==FTSQUERY_NEAR + ); + assert( pExpr->pLeft && pExpr->pRight ); + if( pExpr->eType==FTSQUERY_OR ){ + pRoot = pExpr->pLeft; + **ppOr = pRoot; + (*ppOr)++; + } + fts3EvalTokenCosts(pCsr, pRoot, pExpr->pLeft, ppTC, ppOr, pRc); + if( pExpr->eType==FTSQUERY_OR ){ + pRoot = pExpr->pRight; + **ppOr = pRoot; + (*ppOr)++; + } + fts3EvalTokenCosts(pCsr, pRoot, pExpr->pRight, ppTC, ppOr, pRc); + } } } /* -** If parameter iCol is not 0, write an POS_COLUMN (1) byte followed by -** the value of iCol encoded as a varint to *pp. This will start a new -** column list. +** Determine the average document (row) size in pages. If successful, +** write this value to *pnPage and return SQLITE_OK. Otherwise, return +** an SQLite error code. ** -** Set *pp to point to the byte just after the last byte written before -** returning (do not modify it if iCol==0). Return the total number of bytes -** written (0 if iCol==0). +** The average document size in pages is calculated by first calculating +** determining the average size in bytes, B. If B is less than the amount +** of data that will fit on a single leaf page of an intkey table in +** this database, then the average docsize is 1. Otherwise, it is 1 plus +** the number of overflow pages consumed by a record B bytes in size. */ -static int fts3PutColNumber(char **pp, int iCol){ - int n = 0; /* Number of bytes written */ - if( iCol ){ - char *p = *pp; /* Output pointer */ - n = 1 + sqlite3Fts3PutVarint(&p[1], iCol); - *p = 0x01; - *pp = &p[n]; +static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){ + if( pCsr->nRowAvg==0 ){ + /* The average document size, which is required to calculate the cost + ** of each doclist, has not yet been determined. Read the required + ** data from the %_stat table to calculate it. + ** + ** Entry 0 of the %_stat table is a blob containing (nCol+1) FTS3 + ** varints, where nCol is the number of columns in the FTS3 table. + ** The first varint is the number of documents currently stored in + ** the table. The following nCol varints contain the total amount of + ** data stored in all rows of each column of the table, from left + ** to right. + */ + int rc; + Fts3Table *p = (Fts3Table*)pCsr->base.pVtab; + sqlite3_stmt *pStmt; + sqlite3_int64 nDoc = 0; + sqlite3_int64 nByte = 0; + const char *pEnd; + const char *a; + + rc = sqlite3Fts3SelectDoctotal(p, &pStmt); + if( rc!=SQLITE_OK ) return rc; + a = sqlite3_column_blob(pStmt, 0); + assert( a ); + + pEnd = &a[sqlite3_column_bytes(pStmt, 0)]; + a += sqlite3Fts3GetVarint(a, &nDoc); + while( anDoc = nDoc; + pCsr->nRowAvg = (int)(((nByte / nDoc) + p->nPgsz) / p->nPgsz); + assert( pCsr->nRowAvg>0 ); + rc = sqlite3_reset(pStmt); + if( rc!=SQLITE_OK ) return rc; } - return n; + + *pnPage = pCsr->nRowAvg; + return SQLITE_OK; } /* -** Compute the union of two position lists. The output written -** into *pp contains all positions of both *pp1 and *pp2 in sorted -** order and with any duplicates removed. All pointers are -** updated appropriately. The caller is responsible for insuring -** that there is enough space in *pp to hold the complete output. +** This function is called to select the tokens (if any) that will be +** deferred. The array aTC[] has already been populated when this is +** called. +** +** This function is called once for each AND/NEAR cluster in the +** expression. Each invocation determines which tokens to defer within +** the cluster with root node pRoot. See comments above the definition +** of struct Fts3TokenAndCost for more details. +** +** If no error occurs, SQLITE_OK is returned and sqlite3Fts3DeferToken() +** called on each token to defer. Otherwise, an SQLite error code is +** returned. */ -static void fts3PoslistMerge( - char **pp, /* Output buffer */ - char **pp1, /* Left input list */ - char **pp2 /* Right input list */ +static int fts3EvalSelectDeferred( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Expr *pRoot, /* Consider tokens with this root node */ + Fts3TokenAndCost *aTC, /* Array of expression tokens and costs */ + int nTC /* Number of entries in aTC[] */ ){ - char *p = *pp; - char *p1 = *pp1; - char *p2 = *pp2; + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int nDocSize = 0; /* Number of pages per doc loaded */ + int rc = SQLITE_OK; /* Return code */ + int ii; /* Iterator variable for various purposes */ + int nOvfl = 0; /* Total overflow pages used by doclists */ + int nToken = 0; /* Total number of tokens in cluster */ + + int nMinEst = 0; /* The minimum count for any phrase so far. */ + int nLoad4 = 1; /* (Phrases that will be loaded)^4. */ + + /* Tokens are never deferred for FTS tables created using the content=xxx + ** option. The reason being that it is not guaranteed that the content + ** table actually contains the same data as the index. To prevent this from + ** causing any problems, the deferred token optimization is completely + ** disabled for content=xxx tables. */ + if( pTab->zContentTbl ){ + return SQLITE_OK; + } - while( *p1 || *p2 ){ - int iCol1; /* The current column index in pp1 */ - int iCol2; /* The current column index in pp2 */ + /* Count the tokens in this AND/NEAR cluster. If none of the doclists + ** associated with the tokens spill onto overflow pages, or if there is + ** only 1 token, exit early. No tokens to defer in this case. */ + for(ii=0; ii0 ); - if( *p2==POS_COLUMN ) sqlite3Fts3GetVarint32(&p2[1], &iCol2); - else if( *p2==POS_END ) iCol2 = POSITION_LIST_END; - else iCol2 = 0; - if( iCol1==iCol2 ){ - sqlite3_int64 i1 = 0; /* Last position from pp1 */ - sqlite3_int64 i2 = 0; /* Last position from pp2 */ - sqlite3_int64 iPrev = 0; - int n = fts3PutColNumber(&p, iCol1); - p1 += n; - p2 += n; + /* Iterate through all tokens in this AND/NEAR cluster, in ascending order + ** of the number of overflow pages that will be loaded by the pager layer + ** to retrieve the entire doclist for the token from the full-text index. + ** Load the doclists for tokens that are either: + ** + ** a. The cheapest token in the entire query (i.e. the one visited by the + ** first iteration of this loop), or + ** + ** b. Part of a multi-token phrase. + ** + ** After each token doclist is loaded, merge it with the others from the + ** same phrase and count the number of documents that the merged doclist + ** contains. Set variable "nMinEst" to the smallest number of documents in + ** any phrase doclist for which 1 or more token doclists have been loaded. + ** Let nOther be the number of other phrases for which it is certain that + ** one or more tokens will not be deferred. + ** + ** Then, for each token, defer it if loading the doclist would result in + ** loading N or more overflow pages into memory, where N is computed as: + ** + ** (nMinEst + 4^nOther - 1) / (4^nOther) + */ + for(ii=0; iinOvfl) + ){ + pTC = &aTC[iTC]; + } + } + assert( pTC ); + + if( ii && pTC->nOvfl>=((nMinEst+(nLoad4/4)-1)/(nLoad4/4))*nDocSize ){ + /* The number of overflow pages to load for this (and therefore all + ** subsequent) tokens is greater than the estimated number of pages + ** that will be loaded if all subsequent tokens are deferred. */ - fts3GetDeltaVarint(&p1, &i1); - fts3GetDeltaVarint(&p2, &i2); - do { - fts3PutDeltaVarint(&p, &iPrev, (i1pToken; + rc = sqlite3Fts3DeferToken(pCsr, pToken, pTC->iCol); + fts3SegReaderCursorFree(pToken->pSegcsr); + pToken->pSegcsr = 0; + }else{ + /* Set nLoad4 to the value of (4^nOther) for the next iteration of the + ** for-loop. Except, limit the value to 2^24 to prevent it from + ** overflowing the 32-bit integer it is stored in. */ + if( ii<12 ) nLoad4 = nLoad4*4; + + if( ii==0 || (pTC->pPhrase->nToken>1 && ii!=nToken-1) ){ + /* Either this is the cheapest token in the entire query, or it is + ** part of a multi-token phrase. Either way, the entire doclist will + ** (eventually) be loaded into memory. It may as well be now. */ + Fts3PhraseToken *pToken = pTC->pToken; + int nList = 0; + char *pList = 0; + rc = fts3TermSelect(pTab, pToken, pTC->iCol, &nList, &pList); + assert( rc==SQLITE_OK || pList==0 ); + if( rc==SQLITE_OK ){ + int nCount; + fts3EvalPhraseMergeToken(pTab, pTC->pPhrase, pTC->iToken,pList,nList); + nCount = fts3DoclistCountDocids( + pTC->pPhrase->doclist.aAll, pTC->pPhrase->doclist.nAll + ); + if( ii==0 || nCountpToken = 0; + } + + return rc; +} + +/* +** This function is called from within the xFilter method. It initializes +** the full-text query currently stored in pCsr->pExpr. To iterate through +** the results of a query, the caller does: +** +** fts3EvalStart(pCsr); +** while( 1 ){ +** fts3EvalNext(pCsr); +** if( pCsr->bEof ) break; +** ... return row pCsr->iPrevId to the caller ... +** } +*/ +static int fts3EvalStart(Fts3Cursor *pCsr){ + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int rc = SQLITE_OK; + int nToken = 0; + int nOr = 0; + + /* Allocate a MultiSegReader for each token in the expression. */ + fts3EvalAllocateReaders(pCsr, pCsr->pExpr, &nToken, &nOr, &rc); + + /* Determine which, if any, tokens in the expression should be deferred. */ +#ifndef SQLITE_DISABLE_FTS4_DEFERRED + if( rc==SQLITE_OK && nToken>1 && pTab->bFts4 ){ + Fts3TokenAndCost *aTC; + Fts3Expr **apOr; + aTC = (Fts3TokenAndCost *)sqlite3_malloc( + sizeof(Fts3TokenAndCost) * nToken + + sizeof(Fts3Expr *) * nOr * 2 + ); + apOr = (Fts3Expr **)&aTC[nToken]; + + if( !aTC ){ + rc = SQLITE_NOMEM; + }else{ + int ii; + Fts3TokenAndCost *pTC = aTC; + Fts3Expr **ppOr = apOr; + + fts3EvalTokenCosts(pCsr, 0, pCsr->pExpr, &pTC, &ppOr, &rc); + nToken = (int)(pTC-aTC); + nOr = (int)(ppOr-apOr); + + if( rc==SQLITE_OK ){ + rc = fts3EvalSelectDeferred(pCsr, 0, aTC, nToken); + for(ii=0; rc==SQLITE_OK && iipExpr, &rc); + return rc; } /* -** nToken==1 searches for adjacent positions. -** -** This function is used to merge two position lists into one. When it is -** called, *pp1 and *pp2 must both point to position lists. A position-list is -** the part of a doclist that follows each document id. For example, if a row -** contains: -** -** 'a b c'|'x y z'|'a b b a' +** Invalidate the current position list for phrase pPhrase. +*/ +static void fts3EvalInvalidatePoslist(Fts3Phrase *pPhrase){ + if( pPhrase->doclist.bFreeList ){ + sqlite3_free(pPhrase->doclist.pList); + } + pPhrase->doclist.pList = 0; + pPhrase->doclist.nList = 0; + pPhrase->doclist.bFreeList = 0; +} + +/* +** This function is called to edit the position list associated with +** the phrase object passed as the fifth argument according to a NEAR +** condition. For example: ** -** Then the position list for this row for token 'b' would consist of: +** abc NEAR/5 "def ghi" ** -** 0x02 0x01 0x02 0x03 0x03 0x00 +** Parameter nNear is passed the NEAR distance of the expression (5 in +** the example above). When this function is called, *paPoslist points to +** the position list, and *pnToken is the number of phrase tokens in, the +** phrase on the other side of the NEAR operator to pPhrase. For example, +** if pPhrase refers to the "def ghi" phrase, then *paPoslist points to +** the position list associated with phrase "abc". ** -** When this function returns, both *pp1 and *pp2 are left pointing to the -** byte following the 0x00 terminator of their respective position lists. +** All positions in the pPhrase position list that are not sufficiently +** close to a position in the *paPoslist position list are removed. If this +** leaves 0 positions, zero is returned. Otherwise, non-zero. ** -** If isSaveLeft is 0, an entry is added to the output position list for -** each position in *pp2 for which there exists one or more positions in -** *pp1 so that (pos(*pp2)>pos(*pp1) && pos(*pp2)-pos(*pp1)<=nToken). i.e. -** when the *pp1 token appears before the *pp2 token, but not more than nToken -** slots before it. +** Before returning, *paPoslist is set to point to the position lsit +** associated with pPhrase. And *pnToken is set to the number of tokens in +** pPhrase. */ -static int fts3PoslistPhraseMerge( - char **pp, /* IN/OUT: Preallocated output buffer */ - int nToken, /* Maximum difference in token positions */ - int isSaveLeft, /* Save the left position */ - int isExact, /* If *pp1 is exactly nTokens before *pp2 */ - char **pp1, /* IN/OUT: Left input list */ - char **pp2 /* IN/OUT: Right input list */ +static int fts3EvalNearTrim( + int nNear, /* NEAR distance. As in "NEAR/nNear". */ + char *aTmp, /* Temporary space to use */ + char **paPoslist, /* IN/OUT: Position list */ + int *pnToken, /* IN/OUT: Tokens in phrase of *paPoslist */ + Fts3Phrase *pPhrase /* The phrase object to trim the doclist of */ ){ - char *p = (pp ? *pp : 0); - char *p1 = *pp1; - char *p2 = *pp2; - int iCol1 = 0; - int iCol2 = 0; + int nParam1 = nNear + pPhrase->nToken; + int nParam2 = nNear + *pnToken; + int nNew; + char *p2; + char *pOut; + int res; - /* Never set both isSaveLeft and isExact for the same invocation. */ - assert( isSaveLeft==0 || isExact==0 ); + assert( pPhrase->doclist.pList ); - assert( *p1!=0 && *p2!=0 ); - if( *p1==POS_COLUMN ){ - p1++; - p1 += sqlite3Fts3GetVarint32(p1, &iCol1); - } - if( *p2==POS_COLUMN ){ - p2++; - p2 += sqlite3Fts3GetVarint32(p2, &iCol2); + p2 = pOut = pPhrase->doclist.pList; + res = fts3PoslistNearMerge( + &pOut, aTmp, nParam1, nParam2, paPoslist, &p2 + ); + if( res ){ + nNew = (int)(pOut - pPhrase->doclist.pList) - 1; + assert( pPhrase->doclist.pList[nNew]=='\0' ); + assert( nNew<=pPhrase->doclist.nList && nNew>0 ); + memset(&pPhrase->doclist.pList[nNew], 0, pPhrase->doclist.nList - nNew); + pPhrase->doclist.nList = nNew; + *paPoslist = pPhrase->doclist.pList; + *pnToken = pPhrase->nToken; } - while( 1 ){ - if( iCol1==iCol2 ){ - char *pSave = p; - sqlite3_int64 iPrev = 0; - sqlite3_int64 iPos1 = 0; - sqlite3_int64 iPos2 = 0; + return res; +} - if( pp && iCol1 ){ - *p++ = POS_COLUMN; - p += sqlite3Fts3PutVarint(p, iCol1); - } +/* +** This function is a no-op if *pRc is other than SQLITE_OK when it is called. +** Otherwise, it advances the expression passed as the second argument to +** point to the next matching row in the database. Expressions iterate through +** matching rows in docid order. Ascending order if Fts3Cursor.bDesc is zero, +** or descending if it is non-zero. +** +** If an error occurs, *pRc is set to an SQLite error code. Otherwise, if +** successful, the following variables in pExpr are set: +** +** Fts3Expr.bEof (non-zero if EOF - there is no next row) +** Fts3Expr.iDocid (valid if bEof==0. The docid of the next row) +** +** If the expression is of type FTSQUERY_PHRASE, and the expression is not +** at EOF, then the following variables are populated with the position list +** for the phrase for the visited row: +** +** FTs3Expr.pPhrase->doclist.nList (length of pList in bytes) +** FTs3Expr.pPhrase->doclist.pList (pointer to position list) +** +** It says above that this function advances the expression to the next +** matching row. This is usually true, but there are the following exceptions: +** +** 1. Deferred tokens are not taken into account. If a phrase consists +** entirely of deferred tokens, it is assumed to match every row in +** the db. In this case the position-list is not populated at all. +** +** Or, if a phrase contains one or more deferred tokens and one or +** more non-deferred tokens, then the expression is advanced to the +** next possible match, considering only non-deferred tokens. In other +** words, if the phrase is "A B C", and "B" is deferred, the expression +** is advanced to the next row that contains an instance of "A * C", +** where "*" may match any single token. The position list in this case +** is populated as for "A * C" before returning. +** +** 2. NEAR is treated as AND. If the expression is "x NEAR y", it is +** advanced to point to the next row that matches "x AND y". +** +** See fts3EvalTestDeferredAndNear() for details on testing if a row is +** really a match, taking into account deferred tokens and NEAR operators. +*/ +static void fts3EvalNextRow( + Fts3Cursor *pCsr, /* FTS Cursor handle */ + Fts3Expr *pExpr, /* Expr. to advance to next matching row */ + int *pRc /* IN/OUT: Error code */ +){ + if( *pRc==SQLITE_OK ){ + int bDescDoclist = pCsr->bDesc; /* Used by DOCID_CMP() macro */ + assert( pExpr->bEof==0 ); + pExpr->bStart = 1; - assert( *p1!=POS_END && *p1!=POS_COLUMN ); - assert( *p2!=POS_END && *p2!=POS_COLUMN ); - fts3GetDeltaVarint(&p1, &iPos1); iPos1 -= 2; - fts3GetDeltaVarint(&p2, &iPos2); iPos2 -= 2; + switch( pExpr->eType ){ + case FTSQUERY_NEAR: + case FTSQUERY_AND: { + Fts3Expr *pLeft = pExpr->pLeft; + Fts3Expr *pRight = pExpr->pRight; + assert( !pLeft->bDeferred || !pRight->bDeferred ); - while( 1 ){ - if( iPos2==iPos1+nToken - || (isExact==0 && iPos2>iPos1 && iPos2<=iPos1+nToken) - ){ - sqlite3_int64 iSave; - if( !pp ){ - fts3PoslistCopy(0, &p2); - fts3PoslistCopy(0, &p1); - *pp1 = p1; - *pp2 = p2; - return 1; + if( pLeft->bDeferred ){ + /* LHS is entirely deferred. So we assume it matches every row. + ** Advance the RHS iterator to find the next row visited. */ + fts3EvalNextRow(pCsr, pRight, pRc); + pExpr->iDocid = pRight->iDocid; + pExpr->bEof = pRight->bEof; + }else if( pRight->bDeferred ){ + /* RHS is entirely deferred. So we assume it matches every row. + ** Advance the LHS iterator to find the next row visited. */ + fts3EvalNextRow(pCsr, pLeft, pRc); + pExpr->iDocid = pLeft->iDocid; + pExpr->bEof = pLeft->bEof; + }else{ + /* Neither the RHS or LHS are deferred. */ + fts3EvalNextRow(pCsr, pLeft, pRc); + fts3EvalNextRow(pCsr, pRight, pRc); + while( !pLeft->bEof && !pRight->bEof && *pRc==SQLITE_OK ){ + sqlite3_int64 iDiff = DOCID_CMP(pLeft->iDocid, pRight->iDocid); + if( iDiff==0 ) break; + if( iDiff<0 ){ + fts3EvalNextRow(pCsr, pLeft, pRc); + }else{ + fts3EvalNextRow(pCsr, pRight, pRc); + } } - iSave = isSaveLeft ? iPos1 : iPos2; - fts3PutDeltaVarint(&p, &iPrev, iSave+2); iPrev -= 2; - pSave = 0; + pExpr->iDocid = pLeft->iDocid; + pExpr->bEof = (pLeft->bEof || pRight->bEof); } - if( (!isSaveLeft && iPos2<=(iPos1+nToken)) || iPos2<=iPos1 ){ - if( (*p2&0xFE)==0 ) break; - fts3GetDeltaVarint(&p2, &iPos2); iPos2 -= 2; + break; + } + + case FTSQUERY_OR: { + Fts3Expr *pLeft = pExpr->pLeft; + Fts3Expr *pRight = pExpr->pRight; + sqlite3_int64 iCmp = DOCID_CMP(pLeft->iDocid, pRight->iDocid); + + assert( pLeft->bStart || pLeft->iDocid==pRight->iDocid ); + assert( pRight->bStart || pLeft->iDocid==pRight->iDocid ); + + if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){ + fts3EvalNextRow(pCsr, pLeft, pRc); + }else if( pLeft->bEof || (pRight->bEof==0 && iCmp>0) ){ + fts3EvalNextRow(pCsr, pRight, pRc); }else{ - if( (*p1&0xFE)==0 ) break; - fts3GetDeltaVarint(&p1, &iPos1); iPos1 -= 2; + fts3EvalNextRow(pCsr, pLeft, pRc); + fts3EvalNextRow(pCsr, pRight, pRc); } - } - if( pSave ){ - assert( pp && p ); - p = pSave; + pExpr->bEof = (pLeft->bEof && pRight->bEof); + iCmp = DOCID_CMP(pLeft->iDocid, pRight->iDocid); + if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){ + pExpr->iDocid = pLeft->iDocid; + }else{ + pExpr->iDocid = pRight->iDocid; + } + + break; } - fts3ColumnlistCopy(0, &p1); - fts3ColumnlistCopy(0, &p2); - assert( (*p1&0xFE)==0 && (*p2&0xFE)==0 ); - if( 0==*p1 || 0==*p2 ) break; + case FTSQUERY_NOT: { + Fts3Expr *pLeft = pExpr->pLeft; + Fts3Expr *pRight = pExpr->pRight; - p1++; - p1 += sqlite3Fts3GetVarint32(p1, &iCol1); - p2++; - p2 += sqlite3Fts3GetVarint32(p2, &iCol2); - } + if( pRight->bStart==0 ){ + fts3EvalNextRow(pCsr, pRight, pRc); + assert( *pRc!=SQLITE_OK || pRight->bStart ); + } - /* Advance pointer p1 or p2 (whichever corresponds to the smaller of - ** iCol1 and iCol2) so that it points to either the 0x00 that marks the - ** end of the position list, or the 0x01 that precedes the next - ** column-number in the position list. - */ - else if( iCol1bEof==0 ){ + while( !*pRc + && !pRight->bEof + && DOCID_CMP(pLeft->iDocid, pRight->iDocid)>0 + ){ + fts3EvalNextRow(pCsr, pRight, pRc); + } + } + pExpr->iDocid = pLeft->iDocid; + pExpr->bEof = pLeft->bEof; + break; + } - fts3PoslistCopy(0, &p2); - fts3PoslistCopy(0, &p1); - *pp1 = p1; - *pp2 = p2; - if( !pp || *pp==p ){ - return 0; + default: { + Fts3Phrase *pPhrase = pExpr->pPhrase; + fts3EvalInvalidatePoslist(pPhrase); + *pRc = fts3EvalPhraseNext(pCsr, pPhrase, &pExpr->bEof); + pExpr->iDocid = pPhrase->doclist.iDocid; + break; + } + } } - *p++ = 0x00; - *pp = p; - return 1; } /* -** Merge two position-lists as required by the NEAR operator. The argument -** position lists correspond to the left and right phrases of an expression -** like: -** -** "phrase 1" NEAR "phrase number 2" +** If *pRc is not SQLITE_OK, or if pExpr is not the root node of a NEAR +** cluster, then this function returns 1 immediately. ** -** Position list *pp1 corresponds to the left-hand side of the NEAR -** expression and *pp2 to the right. As usual, the indexes in the position -** lists are the offsets of the last token in each phrase (tokens "1" and "2" -** in the example above). +** Otherwise, it checks if the current row really does match the NEAR +** expression, using the data currently stored in the position lists +** (Fts3Expr->pPhrase.doclist.pList/nList) for each phrase in the expression. ** -** The output position list - written to *pp - is a copy of *pp2 with those -** entries that are not sufficiently NEAR entries in *pp1 removed. +** If the current row is a match, the position list associated with each +** phrase in the NEAR expression is edited in place to contain only those +** phrase instances sufficiently close to their peers to satisfy all NEAR +** constraints. In this case it returns 1. If the NEAR expression does not +** match the current row, 0 is returned. The position lists may or may not +** be edited if 0 is returned. */ -static int fts3PoslistNearMerge( - char **pp, /* Output buffer */ - char *aTmp, /* Temporary buffer space */ - int nRight, /* Maximum difference in token positions */ - int nLeft, /* Maximum difference in token positions */ - char **pp1, /* IN/OUT: Left input list */ - char **pp2 /* IN/OUT: Right input list */ -){ - char *p1 = *pp1; - char *p2 = *pp2; - - char *pTmp1 = aTmp; - char *pTmp2; - char *aTmp2; +static int fts3EvalNearTest(Fts3Expr *pExpr, int *pRc){ int res = 1; - fts3PoslistPhraseMerge(&pTmp1, nRight, 0, 0, pp1, pp2); - aTmp2 = pTmp2 = pTmp1; - *pp1 = p1; - *pp2 = p2; - fts3PoslistPhraseMerge(&pTmp2, nLeft, 1, 0, pp2, pp1); - if( pTmp1!=aTmp && pTmp2!=aTmp2 ){ - fts3PoslistMerge(pp, &aTmp, &aTmp2); - }else if( pTmp1!=aTmp ){ - fts3PoslistCopy(pp, &aTmp); - }else if( pTmp2!=aTmp2 ){ - fts3PoslistCopy(pp, &aTmp2); - }else{ - res = 0; - } + /* The following block runs if pExpr is the root of a NEAR query. + ** For example, the query: + ** + ** "w" NEAR "x" NEAR "y" NEAR "z" + ** + ** which is represented in tree form as: + ** + ** | + ** +--NEAR--+ <-- root of NEAR query + ** | | + ** +--NEAR--+ "z" + ** | | + ** +--NEAR--+ "y" + ** | | + ** "w" "x" + ** + ** The right-hand child of a NEAR node is always a phrase. The + ** left-hand child may be either a phrase or a NEAR node. There are + ** no exceptions to this - it's the way the parser in fts3_expr.c works. + */ + if( *pRc==SQLITE_OK + && pExpr->eType==FTSQUERY_NEAR + && pExpr->bEof==0 + && (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR) + ){ + Fts3Expr *p; + int nTmp = 0; /* Bytes of temp space */ + char *aTmp; /* Temp space for PoslistNearMerge() */ - return res; -} + /* Allocate temporary working space. */ + for(p=pExpr; p->pLeft; p=p->pLeft){ + nTmp += p->pRight->pPhrase->doclist.nList; + } + nTmp += p->pPhrase->doclist.nList; + if( nTmp==0 ){ + res = 0; + }else{ + aTmp = sqlite3_malloc(nTmp*2); + if( !aTmp ){ + *pRc = SQLITE_NOMEM; + res = 0; + }else{ + char *aPoslist = p->pPhrase->doclist.pList; + int nToken = p->pPhrase->nToken; -/* -** A pointer to an instance of this structure is used as the context -** argument to sqlite3Fts3SegReaderIterate() -*/ -typedef struct TermSelect TermSelect; -struct TermSelect { - int isReqPos; - char *aaOutput[16]; /* Malloc'd output buffer */ - int anOutput[16]; /* Size of output in bytes */ -}; + for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ + Fts3Phrase *pPhrase = p->pRight->pPhrase; + int nNear = p->nNear; + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + } + aPoslist = pExpr->pRight->pPhrase->doclist.pList; + nToken = pExpr->pRight->pPhrase->nToken; + for(p=pExpr->pLeft; p && res; p=p->pLeft){ + int nNear; + Fts3Phrase *pPhrase; + assert( p->pParent && p->pParent->pLeft==p ); + nNear = p->pParent->nNear; + pPhrase = ( + p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase + ); + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + } + } -static void fts3GetDeltaVarint3( - char **pp, - char *pEnd, - int bDescIdx, - sqlite3_int64 *pVal -){ - if( *pp>=pEnd ){ - *pp = 0; - }else{ - sqlite3_int64 iVal; - *pp += sqlite3Fts3GetVarint(*pp, &iVal); - if( bDescIdx ){ - *pVal -= iVal; - }else{ - *pVal += iVal; + sqlite3_free(aTmp); } } + + return res; } -static void fts3PutDeltaVarint3( - char **pp, /* IN/OUT: Output pointer */ - int bDescIdx, /* True for descending docids */ - sqlite3_int64 *piPrev, /* IN/OUT: Previous value written to list */ - int *pbFirst, /* IN/OUT: True after first int written */ - sqlite3_int64 iVal /* Write this value to the list */ +/* +** This function is a helper function for fts3EvalTestDeferredAndNear(). +** Assuming no error occurs or has occurred, It returns non-zero if the +** expression passed as the second argument matches the row that pCsr +** currently points to, or zero if it does not. +** +** If *pRc is not SQLITE_OK when this function is called, it is a no-op. +** If an error occurs during execution of this function, *pRc is set to +** the appropriate SQLite error code. In this case the returned value is +** undefined. +*/ +static int fts3EvalTestExpr( + Fts3Cursor *pCsr, /* FTS cursor handle */ + Fts3Expr *pExpr, /* Expr to test. May or may not be root. */ + int *pRc /* IN/OUT: Error code */ ){ - sqlite3_int64 iWrite; - if( bDescIdx==0 || *pbFirst==0 ){ - iWrite = iVal - *piPrev; - }else{ - iWrite = *piPrev - iVal; - } - assert( *pbFirst || *piPrev==0 ); - assert( *pbFirst==0 || iWrite>0 ); - *pp += sqlite3Fts3PutVarint(*pp, iWrite); - *piPrev = iVal; - *pbFirst = 1; -} + int bHit = 1; /* Return value */ + if( *pRc==SQLITE_OK ){ + switch( pExpr->eType ){ + case FTSQUERY_NEAR: + case FTSQUERY_AND: + bHit = ( + fts3EvalTestExpr(pCsr, pExpr->pLeft, pRc) + && fts3EvalTestExpr(pCsr, pExpr->pRight, pRc) + && fts3EvalNearTest(pExpr, pRc) + ); -#define COMPARE_DOCID(i1, i2) ((bDescIdx?-1:1) * (i1-i2)) + /* If the NEAR expression does not match any rows, zero the doclist for + ** all phrases involved in the NEAR. This is because the snippet(), + ** offsets() and matchinfo() functions are not supposed to recognize + ** any instances of phrases that are part of unmatched NEAR queries. + ** For example if this expression: + ** + ** ... MATCH 'a OR (b NEAR c)' + ** + ** is matched against a row containing: + ** + ** 'a b d e' + ** + ** then any snippet() should ony highlight the "a" term, not the "b" + ** (as "b" is part of a non-matching NEAR clause). + */ + if( bHit==0 + && pExpr->eType==FTSQUERY_NEAR + && (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR) + ){ + Fts3Expr *p; + for(p=pExpr; p->pPhrase==0; p=p->pLeft){ + if( p->pRight->iDocid==pCsr->iPrevId ){ + fts3EvalInvalidatePoslist(p->pRight->pPhrase); + } + } + if( p->iDocid==pCsr->iPrevId ){ + fts3EvalInvalidatePoslist(p->pPhrase); + } + } -static int fts3DoclistOrMerge( - int bDescIdx, /* True if arguments are desc */ - char *a1, int n1, /* First doclist */ - char *a2, int n2, /* Second doclist */ - char **paOut, int *pnOut /* OUT: Malloc'd doclist */ -){ - sqlite3_int64 i1 = 0; - sqlite3_int64 i2 = 0; - sqlite3_int64 iPrev = 0; - char *pEnd1 = &a1[n1]; - char *pEnd2 = &a2[n2]; - char *p1 = a1; - char *p2 = a2; - char *p; - char *aOut; - int bFirstOut = 0; + break; - *paOut = 0; - *pnOut = 0; - aOut = sqlite3_malloc(n1+n2); - if( !aOut ) return SQLITE_NOMEM; + case FTSQUERY_OR: { + int bHit1 = fts3EvalTestExpr(pCsr, pExpr->pLeft, pRc); + int bHit2 = fts3EvalTestExpr(pCsr, pExpr->pRight, pRc); + bHit = bHit1 || bHit2; + break; + } - p = aOut; - fts3GetDeltaVarint3(&p1, pEnd1, 0, &i1); - fts3GetDeltaVarint3(&p2, pEnd2, 0, &i2); - while( p1 || p2 ){ - sqlite3_int64 iDiff = COMPARE_DOCID(i1, i2); + case FTSQUERY_NOT: + bHit = ( + fts3EvalTestExpr(pCsr, pExpr->pLeft, pRc) + && !fts3EvalTestExpr(pCsr, pExpr->pRight, pRc) + ); + break; - if( p2 && p1 && iDiff==0 ){ - fts3PutDeltaVarint3(&p, bDescIdx, &iPrev, &bFirstOut, i1); - fts3PoslistMerge(&p, &p1, &p2); - fts3GetDeltaVarint3(&p1, pEnd1, bDescIdx, &i1); - fts3GetDeltaVarint3(&p2, pEnd2, bDescIdx, &i2); - }else if( !p2 || (p1 && iDiff<0) ){ - fts3PutDeltaVarint3(&p, bDescIdx, &iPrev, &bFirstOut, i1); - fts3PoslistCopy(&p, &p1); - fts3GetDeltaVarint3(&p1, pEnd1, bDescIdx, &i1); - }else{ - fts3PutDeltaVarint3(&p, bDescIdx, &iPrev, &bFirstOut, i2); - fts3PoslistCopy(&p, &p2); - fts3GetDeltaVarint3(&p2, pEnd2, bDescIdx, &i2); + default: { +#ifndef SQLITE_DISABLE_FTS4_DEFERRED + if( pCsr->pDeferred + && (pExpr->iDocid==pCsr->iPrevId || pExpr->bDeferred) + ){ + Fts3Phrase *pPhrase = pExpr->pPhrase; + assert( pExpr->bDeferred || pPhrase->doclist.bFreeList==0 ); + if( pExpr->bDeferred ){ + fts3EvalInvalidatePoslist(pPhrase); + } + *pRc = fts3EvalDeferredPhrase(pCsr, pPhrase); + bHit = (pPhrase->doclist.pList!=0); + pExpr->iDocid = pCsr->iPrevId; + }else +#endif + { + bHit = (pExpr->bEof==0 && pExpr->iDocid==pCsr->iPrevId); + } + break; + } } } - - *paOut = aOut; - *pnOut = (p-aOut); - return SQLITE_OK; + return bHit; } -static void fts3DoclistPhraseMerge( - int bDescIdx, /* True if arguments are desc */ - int nDist, /* Distance from left to right (1=adjacent) */ - char *aLeft, int nLeft, /* Left doclist */ - char *aRight, int *pnRight /* IN/OUT: Right/output doclist */ -){ - sqlite3_int64 i1 = 0; - sqlite3_int64 i2 = 0; - sqlite3_int64 iPrev = 0; - char *pEnd1 = &aLeft[nLeft]; - char *pEnd2 = &aRight[*pnRight]; - char *p1 = aLeft; - char *p2 = aRight; - char *p; - int bFirstOut = 0; - char *aOut = aRight; - - assert( nDist>0 ); +/* +** This function is called as the second part of each xNext operation when +** iterating through the results of a full-text query. At this point the +** cursor points to a row that matches the query expression, with the +** following caveats: +** +** * Up until this point, "NEAR" operators in the expression have been +** treated as "AND". +** +** * Deferred tokens have not yet been considered. +** +** If *pRc is not SQLITE_OK when this function is called, it immediately +** returns 0. Otherwise, it tests whether or not after considering NEAR +** operators and deferred tokens the current row is still a match for the +** expression. It returns 1 if both of the following are true: +** +** 1. *pRc is SQLITE_OK when this function returns, and +** +** 2. After scanning the current FTS table row for the deferred tokens, +** it is determined that the row does *not* match the query. +** +** Or, if no error occurs and it seems the current row does match the FTS +** query, return 0. +*/ +static int fts3EvalTestDeferredAndNear(Fts3Cursor *pCsr, int *pRc){ + int rc = *pRc; + int bMiss = 0; + if( rc==SQLITE_OK ){ - p = aOut; - fts3GetDeltaVarint3(&p1, pEnd1, 0, &i1); - fts3GetDeltaVarint3(&p2, pEnd2, 0, &i2); + /* If there are one or more deferred tokens, load the current row into + ** memory and scan it to determine the position list for each deferred + ** token. Then, see if this row is really a match, considering deferred + ** tokens and NEAR operators (neither of which were taken into account + ** earlier, by fts3EvalNextRow()). + */ + if( pCsr->pDeferred ){ + rc = fts3CursorSeek(0, pCsr); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3CacheDeferredDoclists(pCsr); + } + } + bMiss = (0==fts3EvalTestExpr(pCsr, pCsr->pExpr, &rc)); - while( p1 && p2 ){ - sqlite3_int64 iDiff = COMPARE_DOCID(i1, i2); - if( iDiff==0 ){ - char *pSave = p; - sqlite3_int64 iPrevSave = iPrev; - int bFirstOutSave = bFirstOut; + /* Free the position-lists accumulated for each deferred token above. */ + sqlite3Fts3FreeDeferredDoclists(pCsr); + *pRc = rc; + } + return (rc==SQLITE_OK && bMiss); +} - fts3PutDeltaVarint3(&p, bDescIdx, &iPrev, &bFirstOut, i1); - if( 0==fts3PoslistPhraseMerge(&p, nDist, 0, 1, &p1, &p2) ){ - p = pSave; - iPrev = iPrevSave; - bFirstOut = bFirstOutSave; +/* +** Advance to the next document that matches the FTS expression in +** Fts3Cursor.pExpr. +*/ +static int fts3EvalNext(Fts3Cursor *pCsr){ + int rc = SQLITE_OK; /* Return Code */ + Fts3Expr *pExpr = pCsr->pExpr; + assert( pCsr->isEof==0 ); + if( pExpr==0 ){ + pCsr->isEof = 1; + }else{ + do { + if( pCsr->isRequireSeek==0 ){ + sqlite3_reset(pCsr->pStmt); } - fts3GetDeltaVarint3(&p1, pEnd1, bDescIdx, &i1); - fts3GetDeltaVarint3(&p2, pEnd2, bDescIdx, &i2); - }else if( iDiff<0 ){ - fts3PoslistCopy(0, &p1); - fts3GetDeltaVarint3(&p1, pEnd1, bDescIdx, &i1); - }else{ - fts3PoslistCopy(0, &p2); - fts3GetDeltaVarint3(&p2, pEnd2, bDescIdx, &i2); - } + assert( sqlite3_data_count(pCsr->pStmt)==0 ); + fts3EvalNextRow(pCsr, pExpr, &rc); + pCsr->isEof = pExpr->bEof; + pCsr->isRequireSeek = 1; + pCsr->isMatchinfoNeeded = 1; + pCsr->iPrevId = pExpr->iDocid; + }while( pCsr->isEof==0 && fts3EvalTestDeferredAndNear(pCsr, &rc) ); } - *pnRight = p - aOut; -} + /* Check if the cursor is past the end of the docid range specified + ** by Fts3Cursor.iMinDocid/iMaxDocid. If so, set the EOF flag. */ + if( rc==SQLITE_OK && ( + (pCsr->bDesc==0 && pCsr->iPrevId>pCsr->iMaxDocid) + || (pCsr->bDesc!=0 && pCsr->iPrevIdiMinDocid) + )){ + pCsr->isEof = 1; + } + return rc; +} /* -** Merge all doclists in the TermSelect.aaOutput[] array into a single -** doclist stored in TermSelect.aaOutput[0]. If successful, delete all -** other doclists (except the aaOutput[0] one) and return SQLITE_OK. +** Restart interation for expression pExpr so that the next call to +** fts3EvalNext() visits the first row. Do not allow incremental +** loading or merging of phrase doclists for this iteration. ** -** If an OOM error occurs, return SQLITE_NOMEM. In this case it is -** the responsibility of the caller to free any doclists left in the -** TermSelect.aaOutput[] array. +** If *pRc is other than SQLITE_OK when this function is called, it is +** a no-op. If an error occurs within this function, *pRc is set to an +** SQLite error code before returning. */ -static int fts3TermSelectMerge(Fts3Table *p, TermSelect *pTS){ - char *aOut = 0; - int nOut = 0; - int i; - - /* Loop through the doclists in the aaOutput[] array. Merge them all - ** into a single doclist. - */ - for(i=0; iaaOutput); i++){ - if( pTS->aaOutput[i] ){ - if( !aOut ){ - aOut = pTS->aaOutput[i]; - nOut = pTS->anOutput[i]; - pTS->aaOutput[i] = 0; - }else{ - int nNew; - char *aNew; +static void fts3EvalRestart( + Fts3Cursor *pCsr, + Fts3Expr *pExpr, + int *pRc +){ + if( pExpr && *pRc==SQLITE_OK ){ + Fts3Phrase *pPhrase = pExpr->pPhrase; - int rc = fts3DoclistOrMerge(p->bDescIdx, - pTS->aaOutput[i], pTS->anOutput[i], aOut, nOut, &aNew, &nNew - ); - if( rc!=SQLITE_OK ){ - sqlite3_free(aOut); - return rc; + if( pPhrase ){ + fts3EvalInvalidatePoslist(pPhrase); + if( pPhrase->bIncr ){ + int i; + for(i=0; inToken; i++){ + Fts3PhraseToken *pToken = &pPhrase->aToken[i]; + assert( pToken->pDeferred==0 ); + if( pToken->pSegcsr ){ + sqlite3Fts3MsrIncrRestart(pToken->pSegcsr); + } } - - sqlite3_free(pTS->aaOutput[i]); - sqlite3_free(aOut); - pTS->aaOutput[i] = 0; - aOut = aNew; - nOut = nNew; + *pRc = fts3EvalPhraseStart(pCsr, 0, pPhrase); } + pPhrase->doclist.pNextDocid = 0; + pPhrase->doclist.iDocid = 0; } - } - pTS->aaOutput[0] = aOut; - pTS->anOutput[0] = nOut; - return SQLITE_OK; + pExpr->iDocid = 0; + pExpr->bEof = 0; + pExpr->bStart = 0; + + fts3EvalRestart(pCsr, pExpr->pLeft, pRc); + fts3EvalRestart(pCsr, pExpr->pRight, pRc); + } } /* -** This function is used as the sqlite3Fts3SegReaderIterate() callback when -** querying the full-text index for a doclist associated with a term or -** term-prefix. +** After allocating the Fts3Expr.aMI[] array for each phrase in the +** expression rooted at pExpr, the cursor iterates through all rows matched +** by pExpr, calling this function for each row. This function increments +** the values in Fts3Expr.aMI[] according to the position-list currently +** found in Fts3Expr.pPhrase->doclist.pList for each of the phrase +** expression nodes. */ -static int fts3TermSelectCb( - Fts3Table *p, /* Virtual table object */ - void *pContext, /* Pointer to TermSelect structure */ - char *zTerm, - int nTerm, - char *aDoclist, - int nDoclist -){ - TermSelect *pTS = (TermSelect *)pContext; - - UNUSED_PARAMETER(p); - UNUSED_PARAMETER(zTerm); - UNUSED_PARAMETER(nTerm); - - if( pTS->aaOutput[0]==0 ){ - /* If this is the first term selected, copy the doclist to the output - ** buffer using memcpy(). */ - pTS->aaOutput[0] = sqlite3_malloc(nDoclist); - pTS->anOutput[0] = nDoclist; - if( pTS->aaOutput[0] ){ - memcpy(pTS->aaOutput[0], aDoclist, nDoclist); - }else{ - return SQLITE_NOMEM; - } - }else{ - char *aMerge = aDoclist; - int nMerge = nDoclist; - int iOut; - - for(iOut=0; iOutaaOutput); iOut++){ - if( pTS->aaOutput[iOut]==0 ){ - assert( iOut>0 ); - pTS->aaOutput[iOut] = aMerge; - pTS->anOutput[iOut] = nMerge; - break; - }else{ - char *aNew; - int nNew; +static void fts3EvalUpdateCounts(Fts3Expr *pExpr){ + if( pExpr ){ + Fts3Phrase *pPhrase = pExpr->pPhrase; + if( pPhrase && pPhrase->doclist.pList ){ + int iCol = 0; + char *p = pPhrase->doclist.pList; - int rc = fts3DoclistOrMerge(p->bDescIdx, aMerge, nMerge, - pTS->aaOutput[iOut], pTS->anOutput[iOut], &aNew, &nNew - ); - if( rc!=SQLITE_OK ){ - if( aMerge!=aDoclist ) sqlite3_free(aMerge); - return rc; + assert( *p ); + while( 1 ){ + u8 c = 0; + int iCnt = 0; + while( 0xFE & (*p | c) ){ + if( (c&0x80)==0 ) iCnt++; + c = *p++ & 0x80; } - if( aMerge!=aDoclist ) sqlite3_free(aMerge); - sqlite3_free(pTS->aaOutput[iOut]); - pTS->aaOutput[iOut] = 0; - - aMerge = aNew; - nMerge = nNew; - if( (iOut+1)==SizeofArray(pTS->aaOutput) ){ - pTS->aaOutput[iOut] = aMerge; - pTS->anOutput[iOut] = nMerge; - } + /* aMI[iCol*3 + 1] = Number of occurrences + ** aMI[iCol*3 + 2] = Number of rows containing at least one instance + */ + pExpr->aMI[iCol*3 + 1] += iCnt; + pExpr->aMI[iCol*3 + 2] += (iCnt>0); + if( *p==0x00 ) break; + p++; + p += fts3GetVarint32(p, &iCol); } } + + fts3EvalUpdateCounts(pExpr->pLeft); + fts3EvalUpdateCounts(pExpr->pRight); } - return SQLITE_OK; } /* -** Append SegReader object pNew to the end of the pCsr->apSegment[] array. +** Expression pExpr must be of type FTSQUERY_PHRASE. +** +** If it is not already allocated and populated, this function allocates and +** populates the Fts3Expr.aMI[] array for expression pExpr. If pExpr is part +** of a NEAR expression, then it also allocates and populates the same array +** for all other phrases that are part of the NEAR expression. +** +** SQLITE_OK is returned if the aMI[] array is successfully allocated and +** populated. Otherwise, if an error occurs, an SQLite error code is returned. */ -static int fts3SegReaderCursorAppend( - Fts3MultiSegReader *pCsr, - Fts3SegReader *pNew +static int fts3EvalGatherStats( + Fts3Cursor *pCsr, /* Cursor object */ + Fts3Expr *pExpr /* FTSQUERY_PHRASE expression */ ){ - if( (pCsr->nSegment%16)==0 ){ - Fts3SegReader **apNew; - int nByte = (pCsr->nSegment + 16)*sizeof(Fts3SegReader*); - apNew = (Fts3SegReader **)sqlite3_realloc(pCsr->apSegment, nByte); - if( !apNew ){ - sqlite3Fts3SegReaderFree(pNew); - return SQLITE_NOMEM; - } - pCsr->apSegment = apNew; - } - pCsr->apSegment[pCsr->nSegment++] = pNew; - return SQLITE_OK; -} + int rc = SQLITE_OK; /* Return code */ -static int fts3SegReaderCursor( - Fts3Table *p, /* FTS3 table handle */ - int iIndex, /* Index to search (from 0 to p->nIndex-1) */ - int iLevel, /* Level of segments to scan */ - const char *zTerm, /* Term to query for */ - int nTerm, /* Size of zTerm in bytes */ - int isPrefix, /* True for a prefix search */ - int isScan, /* True to scan from zTerm to EOF */ - Fts3MultiSegReader *pCsr /* Cursor object to populate */ -){ - int rc = SQLITE_OK; - int rc2; - sqlite3_stmt *pStmt = 0; + assert( pExpr->eType==FTSQUERY_PHRASE ); + if( pExpr->aMI==0 ){ + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + Fts3Expr *pRoot; /* Root of NEAR expression */ + Fts3Expr *p; /* Iterator used for several purposes */ - /* If iLevel is less than 0 and this is not a scan, include a seg-reader - ** for the pending-terms. If this is a scan, then this call must be being - ** made by an fts4aux module, not an FTS table. In this case calling - ** Fts3SegReaderPending might segfault, as the data structures used by - ** fts4aux are not completely populated. So it's easiest to filter these - ** calls out here. */ - if( iLevel<0 && p->aIndex ){ - Fts3SegReader *pSeg = 0; - rc = sqlite3Fts3SegReaderPending(p, iIndex, zTerm, nTerm, isPrefix, &pSeg); - if( rc==SQLITE_OK && pSeg ){ - rc = fts3SegReaderCursorAppend(pCsr, pSeg); + sqlite3_int64 iPrevId = pCsr->iPrevId; + sqlite3_int64 iDocid; + u8 bEof; + + /* Find the root of the NEAR expression */ + pRoot = pExpr; + while( pRoot->pParent && pRoot->pParent->eType==FTSQUERY_NEAR ){ + pRoot = pRoot->pParent; } - } + iDocid = pRoot->iDocid; + bEof = pRoot->bEof; + assert( pRoot->bStart ); - if( iLevel!=FTS3_SEGCURSOR_PENDING ){ - if( rc==SQLITE_OK ){ - rc = sqlite3Fts3AllSegdirs(p, iIndex, iLevel, &pStmt); + /* Allocate space for the aMSI[] array of each FTSQUERY_PHRASE node */ + for(p=pRoot; p; p=p->pLeft){ + Fts3Expr *pE = (p->eType==FTSQUERY_PHRASE?p:p->pRight); + assert( pE->aMI==0 ); + pE->aMI = (u32 *)sqlite3_malloc(pTab->nColumn * 3 * sizeof(u32)); + if( !pE->aMI ) return SQLITE_NOMEM; + memset(pE->aMI, 0, pTab->nColumn * 3 * sizeof(u32)); } - while( rc==SQLITE_OK && SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){ - Fts3SegReader *pSeg = 0; + fts3EvalRestart(pCsr, pRoot, &rc); - /* Read the values returned by the SELECT into local variables. */ - sqlite3_int64 iStartBlock = sqlite3_column_int64(pStmt, 1); - sqlite3_int64 iLeavesEndBlock = sqlite3_column_int64(pStmt, 2); - sqlite3_int64 iEndBlock = sqlite3_column_int64(pStmt, 3); - int nRoot = sqlite3_column_bytes(pStmt, 4); - char const *zRoot = sqlite3_column_blob(pStmt, 4); + while( pCsr->isEof==0 && rc==SQLITE_OK ){ - /* If zTerm is not NULL, and this segment is not stored entirely on its - ** root node, the range of leaves scanned can be reduced. Do this. */ - if( iStartBlock && zTerm ){ - sqlite3_int64 *pi = (isPrefix ? &iLeavesEndBlock : 0); - rc = fts3SelectLeaf(p, zTerm, nTerm, zRoot, nRoot, &iStartBlock, pi); - if( rc!=SQLITE_OK ) goto finished; - if( isPrefix==0 && isScan==0 ) iLeavesEndBlock = iStartBlock; - } - - rc = sqlite3Fts3SegReaderNew(pCsr->nSegment+1, - iStartBlock, iLeavesEndBlock, iEndBlock, zRoot, nRoot, &pSeg + do { + /* Ensure the %_content statement is reset. */ + if( pCsr->isRequireSeek==0 ) sqlite3_reset(pCsr->pStmt); + assert( sqlite3_data_count(pCsr->pStmt)==0 ); + + /* Advance to the next document */ + fts3EvalNextRow(pCsr, pRoot, &rc); + pCsr->isEof = pRoot->bEof; + pCsr->isRequireSeek = 1; + pCsr->isMatchinfoNeeded = 1; + pCsr->iPrevId = pRoot->iDocid; + }while( pCsr->isEof==0 + && pRoot->eType==FTSQUERY_NEAR + && fts3EvalTestDeferredAndNear(pCsr, &rc) ); - if( rc!=SQLITE_OK ) goto finished; - rc = fts3SegReaderCursorAppend(pCsr, pSeg); + + if( rc==SQLITE_OK && pCsr->isEof==0 ){ + fts3EvalUpdateCounts(pRoot); + } } - } - finished: - rc2 = sqlite3_reset(pStmt); - if( rc==SQLITE_DONE ) rc = rc2; + pCsr->isEof = 0; + pCsr->iPrevId = iPrevId; + if( bEof ){ + pRoot->bEof = bEof; + }else{ + /* Caution: pRoot may iterate through docids in ascending or descending + ** order. For this reason, even though it seems more defensive, the + ** do loop can not be written: + ** + ** do {...} while( pRoot->iDocidbEof==0 ); + }while( pRoot->iDocid!=iDocid && rc==SQLITE_OK ); + fts3EvalTestDeferredAndNear(pCsr, &rc); + } + } return rc; } /* -** Set up a cursor object for iterating through a full-text index or a -** single level therein. +** This function is used by the matchinfo() module to query a phrase +** expression node for the following information: +** +** 1. The total number of occurrences of the phrase in each column of +** the FTS table (considering all rows), and +** +** 2. For each column, the number of rows in the table for which the +** column contains at least one instance of the phrase. +** +** If no error occurs, SQLITE_OK is returned and the values for each column +** written into the array aiOut as follows: +** +** aiOut[iCol*3 + 1] = Number of occurrences +** aiOut[iCol*3 + 2] = Number of rows containing at least one instance +** +** Caveats: +** +** * If a phrase consists entirely of deferred tokens, then all output +** values are set to the number of documents in the table. In other +** words we assume that very common tokens occur exactly once in each +** column of each row of the table. +** +** * If a phrase contains some deferred tokens (and some non-deferred +** tokens), count the potential occurrence identified by considering +** the non-deferred tokens instead of actual phrase occurrences. +** +** * If the phrase is part of a NEAR expression, then only phrase instances +** that meet the NEAR constraint are included in the counts. */ -SQLITE_PRIVATE int sqlite3Fts3SegReaderCursor( - Fts3Table *p, /* FTS3 table handle */ - int iIndex, /* Index to search (from 0 to p->nIndex-1) */ - int iLevel, /* Level of segments to scan */ - const char *zTerm, /* Term to query for */ - int nTerm, /* Size of zTerm in bytes */ - int isPrefix, /* True for a prefix search */ - int isScan, /* True to scan from zTerm to EOF */ - Fts3MultiSegReader *pCsr /* Cursor object to populate */ -){ - assert( iIndex>=0 && iIndexnIndex ); - assert( iLevel==FTS3_SEGCURSOR_ALL - || iLevel==FTS3_SEGCURSOR_PENDING - || iLevel>=0 - ); - assert( iLevelaIndex==0 ); - - memset(pCsr, 0, sizeof(Fts3MultiSegReader)); - - return fts3SegReaderCursor( - p, iIndex, iLevel, zTerm, nTerm, isPrefix, isScan, pCsr - ); -} - -static int fts3SegReaderCursorAddZero( - Fts3Table *p, - const char *zTerm, - int nTerm, - Fts3MultiSegReader *pCsr -){ - return fts3SegReaderCursor(p, 0, FTS3_SEGCURSOR_ALL, zTerm, nTerm, 0, 0,pCsr); -} - - -SQLITE_PRIVATE int sqlite3Fts3TermSegReaderCursor( - Fts3Cursor *pCsr, /* Virtual table cursor handle */ - const char *zTerm, /* Term to query for */ - int nTerm, /* Size of zTerm in bytes */ - int isPrefix, /* True for a prefix search */ - Fts3MultiSegReader **ppSegcsr /* OUT: Allocated seg-reader cursor */ +SQLITE_PRIVATE int sqlite3Fts3EvalPhraseStats( + Fts3Cursor *pCsr, /* FTS cursor handle */ + Fts3Expr *pExpr, /* Phrase expression */ + u32 *aiOut /* Array to write results into (see above) */ ){ - Fts3MultiSegReader *pSegcsr; /* Object to allocate and return */ - int rc = SQLITE_NOMEM; /* Return code */ - - pSegcsr = sqlite3_malloc(sizeof(Fts3MultiSegReader)); - if( pSegcsr ){ - int i; - int bFound = 0; /* True once an index has been found */ - Fts3Table *p = (Fts3Table *)pCsr->base.pVtab; - - if( isPrefix ){ - for(i=1; bFound==0 && inIndex; i++){ - if( p->aIndex[i].nPrefix==nTerm ){ - bFound = 1; - rc = sqlite3Fts3SegReaderCursor( - p, i, FTS3_SEGCURSOR_ALL, zTerm, nTerm, 0, 0, pSegcsr); - pSegcsr->bLookup = 1; - } - } + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + int rc = SQLITE_OK; + int iCol; - for(i=1; bFound==0 && inIndex; i++){ - if( p->aIndex[i].nPrefix==nTerm+1 ){ - bFound = 1; - rc = sqlite3Fts3SegReaderCursor( - p, i, FTS3_SEGCURSOR_ALL, zTerm, nTerm, 1, 0, pSegcsr - ); - if( rc==SQLITE_OK ){ - rc = fts3SegReaderCursorAddZero(p, zTerm, nTerm, pSegcsr); - } - } - } + if( pExpr->bDeferred && pExpr->pParent->eType!=FTSQUERY_NEAR ){ + assert( pCsr->nDoc>0 ); + for(iCol=0; iColnColumn; iCol++){ + aiOut[iCol*3 + 1] = (u32)pCsr->nDoc; + aiOut[iCol*3 + 2] = (u32)pCsr->nDoc; } - - if( bFound==0 ){ - rc = sqlite3Fts3SegReaderCursor( - p, 0, FTS3_SEGCURSOR_ALL, zTerm, nTerm, isPrefix, 0, pSegcsr - ); - pSegcsr->bLookup = !isPrefix; + }else{ + rc = fts3EvalGatherStats(pCsr, pExpr); + if( rc==SQLITE_OK ){ + assert( pExpr->aMI ); + for(iCol=0; iColnColumn; iCol++){ + aiOut[iCol*3 + 1] = pExpr->aMI[iCol*3 + 1]; + aiOut[iCol*3 + 2] = pExpr->aMI[iCol*3 + 2]; + } } } - *ppSegcsr = pSegcsr; return rc; } -static void fts3SegReaderCursorFree(Fts3MultiSegReader *pSegcsr){ - sqlite3Fts3SegReaderFinish(pSegcsr); - sqlite3_free(pSegcsr); -} - /* -** This function retreives the doclist for the specified term (or term -** prefix) from the database. +** The expression pExpr passed as the second argument to this function +** must be of type FTSQUERY_PHRASE. ** -** The returned doclist may be in one of two formats, depending on the -** value of parameter isReqPos. If isReqPos is zero, then the doclist is -** a sorted list of delta-compressed docids (a bare doclist). If isReqPos -** is non-zero, then the returned list is in the same format as is stored -** in the database without the found length specifier at the start of on-disk -** doclists. +** The returned value is either NULL or a pointer to a buffer containing +** a position-list indicating the occurrences of the phrase in column iCol +** of the current row. +** +** More specifically, the returned buffer contains 1 varint for each +** occurrence of the phrase in the column, stored using the normal (delta+2) +** compression and is terminated by either an 0x01 or 0x00 byte. For example, +** if the requested column contains "a b X c d X X" and the position-list +** for 'X' is requested, the buffer returned may contain: +** +** 0x04 0x05 0x03 0x01 or 0x04 0x05 0x03 0x00 +** +** This function works regardless of whether or not the phrase is deferred, +** incremental, or neither. */ -static int fts3TermSelect( - Fts3Table *p, /* Virtual table handle */ - Fts3PhraseToken *pTok, /* Token to query for */ - int iColumn, /* Column to query (or -ve for all columns) */ - int isReqPos, /* True to include position lists in output */ - int *pnOut, /* OUT: Size of buffer at *ppOut */ - char **ppOut /* OUT: Malloced result buffer */ +SQLITE_PRIVATE int sqlite3Fts3EvalPhrasePoslist( + Fts3Cursor *pCsr, /* FTS3 cursor object */ + Fts3Expr *pExpr, /* Phrase to return doclist for */ + int iCol, /* Column to return position list for */ + char **ppOut /* OUT: Pointer to position list */ ){ - int rc; /* Return code */ - Fts3MultiSegReader *pSegcsr; /* Seg-reader cursor for this term */ - TermSelect tsc; /* Context object for fts3TermSelectCb() */ - Fts3SegFilter filter; /* Segment term filter configuration */ + Fts3Phrase *pPhrase = pExpr->pPhrase; + Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + char *pIter; + int iThis; + sqlite3_int64 iDocid; - pSegcsr = pTok->pSegcsr; - memset(&tsc, 0, sizeof(TermSelect)); - tsc.isReqPos = isReqPos; + /* If this phrase is applies specifically to some column other than + ** column iCol, return a NULL pointer. */ + *ppOut = 0; + assert( iCol>=0 && iColnColumn ); + if( (pPhrase->iColumnnColumn && pPhrase->iColumn!=iCol) ){ + return SQLITE_OK; + } - filter.flags = FTS3_SEGMENT_IGNORE_EMPTY - | (pTok->isPrefix ? FTS3_SEGMENT_PREFIX : 0) - | (isReqPos ? FTS3_SEGMENT_REQUIRE_POS : 0) - | (iColumnnColumn ? FTS3_SEGMENT_COLUMN_FILTER : 0); - filter.iCol = iColumn; - filter.zTerm = pTok->z; - filter.nTerm = pTok->n; + iDocid = pExpr->iDocid; + pIter = pPhrase->doclist.pList; + if( iDocid!=pCsr->iPrevId || pExpr->bEof ){ + int bDescDoclist = pTab->bDescIdx; /* For DOCID_CMP macro */ + int iMul; /* +1 if csr dir matches index dir, else -1 */ + int bOr = 0; + u8 bEof = 0; + u8 bTreeEof = 0; + Fts3Expr *p; /* Used to iterate from pExpr to root */ + Fts3Expr *pNear; /* Most senior NEAR ancestor (or pExpr) */ + + /* Check if this phrase descends from an OR expression node. If not, + ** return NULL. Otherwise, the entry that corresponds to docid + ** pCsr->iPrevId may lie earlier in the doclist buffer. Or, if the + ** tree that the node is part of has been marked as EOF, but the node + ** itself is not EOF, then it may point to an earlier entry. */ + pNear = pExpr; + for(p=pExpr->pParent; p; p=p->pParent){ + if( p->eType==FTSQUERY_OR ) bOr = 1; + if( p->eType==FTSQUERY_NEAR ) pNear = p; + if( p->bEof ) bTreeEof = 1; + } + if( bOr==0 ) return SQLITE_OK; + + /* This is the descendent of an OR node. In this case we cannot use + ** an incremental phrase. Load the entire doclist for the phrase + ** into memory in this case. */ + if( pPhrase->bIncr ){ + int rc = SQLITE_OK; + int bEofSave = pExpr->bEof; + fts3EvalRestart(pCsr, pExpr, &rc); + while( rc==SQLITE_OK && !pExpr->bEof ){ + fts3EvalNextRow(pCsr, pExpr, &rc); + if( bEofSave==0 && pExpr->iDocid==iDocid ) break; + } + pIter = pPhrase->doclist.pList; + assert( rc!=SQLITE_OK || pPhrase->bIncr==0 ); + if( rc!=SQLITE_OK ) return rc; + } + + iMul = ((pCsr->bDesc==bDescDoclist) ? 1 : -1); + while( bTreeEof==1 + && pNear->bEof==0 + && (DOCID_CMP(pNear->iDocid, pCsr->iPrevId) * iMul)<0 + ){ + int rc = SQLITE_OK; + fts3EvalNextRow(pCsr, pExpr, &rc); + if( rc!=SQLITE_OK ) return rc; + iDocid = pExpr->iDocid; + pIter = pPhrase->doclist.pList; + } + + bEof = (pPhrase->doclist.nAll==0); + assert( bDescDoclist==0 || bDescDoclist==1 ); + assert( pCsr->bDesc==0 || pCsr->bDesc==1 ); + + if( bEof==0 ){ + if( pCsr->bDesc==bDescDoclist ){ + int dummy; + if( pNear->bEof ){ + /* This expression is already at EOF. So position it to point to the + ** last entry in the doclist at pPhrase->doclist.aAll[]. Variable + ** iDocid is already set for this entry, so all that is required is + ** to set pIter to point to the first byte of the last position-list + ** in the doclist. + ** + ** It would also be correct to set pIter and iDocid to zero. In + ** this case, the first call to sqltie3Fts4DoclistPrev() below + ** would also move the iterator to point to the last entry in the + ** doclist. However, this is expensive, as to do so it has to + ** iterate through the entire doclist from start to finish (since + ** it does not know the docid for the last entry). */ + pIter = &pPhrase->doclist.aAll[pPhrase->doclist.nAll-1]; + fts3ReversePoslist(pPhrase->doclist.aAll, &pIter); + } + while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)>0 ) && bEof==0 ){ + sqlite3Fts3DoclistPrev( + bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, + &pIter, &iDocid, &dummy, &bEof + ); + } + }else{ + if( pNear->bEof ){ + pIter = 0; + iDocid = 0; + } + while( (pIter==0 || DOCID_CMP(iDocid, pCsr->iPrevId)<0 ) && bEof==0 ){ + sqlite3Fts3DoclistNext( + bDescDoclist, pPhrase->doclist.aAll, pPhrase->doclist.nAll, + &pIter, &iDocid, &bEof + ); + } + } + } - rc = sqlite3Fts3SegReaderStart(p, pSegcsr, &filter); - while( SQLITE_OK==rc - && SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, pSegcsr)) - ){ - rc = fts3TermSelectCb(p, (void *)&tsc, - pSegcsr->zTerm, pSegcsr->nTerm, pSegcsr->aDoclist, pSegcsr->nDoclist - ); + if( bEof || iDocid!=pCsr->iPrevId ) pIter = 0; } + if( pIter==0 ) return SQLITE_OK; - if( rc==SQLITE_OK ){ - rc = fts3TermSelectMerge(p, &tsc); - } - if( rc==SQLITE_OK ){ - *ppOut = tsc.aaOutput[0]; - *pnOut = tsc.anOutput[0]; + if( *pIter==0x01 ){ + pIter++; + pIter += fts3GetVarint32(pIter, &iThis); }else{ - int i; - for(i=0; ipSegcsr = 0; - return rc; + *ppOut = ((iCol==iThis)?pIter:0); + return SQLITE_OK; } /* -** This function counts the total number of docids in the doclist stored -** in buffer aList[], size nList bytes. +** Free all components of the Fts3Phrase structure that were allocated by +** the eval module. Specifically, this means to free: ** -** If the isPoslist argument is true, then it is assumed that the doclist -** contains a position-list following each docid. Otherwise, it is assumed -** that the doclist is simply a list of docids stored as delta encoded -** varints. -*/ -static int fts3DoclistCountDocids(int isPoslist, char *aList, int nList){ - int nDoc = 0; /* Return value */ - if( aList ){ - char *aEnd = &aList[nList]; /* Pointer to one byte after EOF */ - char *p = aList; /* Cursor */ - if( !isPoslist ){ - /* The number of docids in the list is the same as the number of - ** varints. In FTS3 a varint consists of a single byte with the 0x80 - ** bit cleared and zero or more bytes with the 0x80 bit set. So to - ** count the varints in the buffer, just count the number of bytes - ** with the 0x80 bit clear. */ - while( pdoclist, and +** * any Fts3MultiSegReader objects held by phrase tokens. +*/ +SQLITE_PRIVATE void sqlite3Fts3EvalPhraseCleanup(Fts3Phrase *pPhrase){ + if( pPhrase ){ + int i; + sqlite3_free(pPhrase->doclist.aAll); + fts3EvalInvalidatePoslist(pPhrase); + memset(&pPhrase->doclist, 0, sizeof(Fts3Doclist)); + for(i=0; inToken; i++){ + fts3SegReaderCursorFree(pPhrase->aToken[i].pSegcsr); + pPhrase->aToken[i].pSegcsr = 0; } } +} - return nDoc; + +/* +** Return SQLITE_CORRUPT_VTAB. +*/ +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE int sqlite3Fts3Corrupt(){ + return SQLITE_CORRUPT_VTAB; } +#endif +#if !SQLITE_CORE /* -** Advance the cursor to the next row in the %_content table that -** matches the search criteria. For a MATCH search, this will be -** the next row that matches. For a full-table scan, this will be -** simply the next row in the %_content table. For a docid lookup, -** this routine simply sets the EOF flag. -** -** Return SQLITE_OK if nothing goes wrong. SQLITE_OK is returned -** even if we reach end-of-file. The fts3EofMethod() will be called -** subsequently to determine whether or not an EOF was hit. +** Initialize API pointer table, if required. */ -static int fts3NextMethod(sqlite3_vtab_cursor *pCursor){ - int rc; - Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; - if( pCsr->eSearch==FTS3_DOCID_SEARCH || pCsr->eSearch==FTS3_FULLSCAN_SEARCH ){ - if( SQLITE_ROW!=sqlite3_step(pCsr->pStmt) ){ - pCsr->isEof = 1; - rc = sqlite3_reset(pCsr->pStmt); - }else{ - pCsr->iPrevId = sqlite3_column_int64(pCsr->pStmt, 0); - rc = SQLITE_OK; - } - }else{ - rc = sqlite3Fts3EvalNext((Fts3Cursor *)pCursor); - } - assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); - return rc; +#ifdef _WIN32 +__declspec(dllexport) +#endif +SQLITE_API int sqlite3_fts3_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + SQLITE_EXTENSION_INIT2(pApi) + return sqlite3Fts3Init(db); } +#endif +#endif + +/************** End of fts3.c ************************************************/ +/************** Begin file fts3_aux.c ****************************************/ /* -** This is the xFilter interface for the virtual table. See -** the virtual table xFilter method documentation for additional -** information. +** 2011 Jan 27 ** -** If idxNum==FTS3_FULLSCAN_SEARCH then do a full table scan against -** the %_content table. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** If idxNum==FTS3_DOCID_SEARCH then do a docid lookup for a single entry -** in the %_content table. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** ** -** If idxNum>=FTS3_FULLTEXT_SEARCH then use the full text index. The -** column on the left-hand side of the MATCH operator is column -** number idxNum-FTS3_FULLTEXT_SEARCH, 0 indexed. argv[0] is the right-hand -** side of the MATCH operator. */ -static int fts3FilterMethod( - sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ - int idxNum, /* Strategy index */ - const char *idxStr, /* Unused */ - int nVal, /* Number of elements in apVal */ - sqlite3_value **apVal /* Arguments for the indexing scheme */ -){ - int rc; - char *zSql; /* SQL statement used to access %_content */ - Fts3Table *p = (Fts3Table *)pCursor->pVtab; - Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; - - UNUSED_PARAMETER(idxStr); - UNUSED_PARAMETER(nVal); - - assert( idxNum>=0 && idxNum<=(FTS3_FULLTEXT_SEARCH+p->nColumn) ); - assert( nVal==0 || nVal==1 ); - assert( (nVal==0)==(idxNum==FTS3_FULLSCAN_SEARCH) ); - assert( p->pSegments==0 ); +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - /* In case the cursor has been used before, clear it now. */ - sqlite3_finalize(pCsr->pStmt); - sqlite3_free(pCsr->aDoclist); - sqlite3Fts3ExprFree(pCsr->pExpr); - memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); +/* #include */ +/* #include */ - if( idxStr ){ - pCsr->bDesc = (idxStr[0]=='D'); - }else{ - pCsr->bDesc = p->bDescIdx; - } - pCsr->eSearch = (i16)idxNum; +typedef struct Fts3auxTable Fts3auxTable; +typedef struct Fts3auxCursor Fts3auxCursor; - if( idxNum!=FTS3_DOCID_SEARCH && idxNum!=FTS3_FULLSCAN_SEARCH ){ - int iCol = idxNum-FTS3_FULLTEXT_SEARCH; - const char *zQuery = (const char *)sqlite3_value_text(apVal[0]); +struct Fts3auxTable { + sqlite3_vtab base; /* Base class used by SQLite core */ + Fts3Table *pFts3Tab; +}; - if( zQuery==0 && sqlite3_value_type(apVal[0])!=SQLITE_NULL ){ - return SQLITE_NOMEM; - } +struct Fts3auxCursor { + sqlite3_vtab_cursor base; /* Base class used by SQLite core */ + Fts3MultiSegReader csr; /* Must be right after "base" */ + Fts3SegFilter filter; + char *zStop; + int nStop; /* Byte-length of string zStop */ + int iLangid; /* Language id to query */ + int isEof; /* True if cursor is at EOF */ + sqlite3_int64 iRowid; /* Current rowid */ - rc = sqlite3Fts3ExprParse(p->pTokenizer, p->azColumn, p->nColumn, - iCol, zQuery, -1, &pCsr->pExpr - ); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_ERROR ){ - static const char *zErr = "malformed MATCH expression: [%s]"; - p->base.zErrMsg = sqlite3_mprintf(zErr, zQuery); - } - return rc; - } + int iCol; /* Current value of 'col' column */ + int nStat; /* Size of aStat[] array */ + struct Fts3auxColstats { + sqlite3_int64 nDoc; /* 'documents' values for current csr row */ + sqlite3_int64 nOcc; /* 'occurrences' values for current csr row */ + } *aStat; +}; - rc = sqlite3Fts3ReadLock(p); - if( rc!=SQLITE_OK ) return rc; +/* +** Schema of the terms table. +*/ +#define FTS3_AUX_SCHEMA \ + "CREATE TABLE x(term, col, documents, occurrences, languageid HIDDEN)" - rc = sqlite3Fts3EvalStart(pCsr, pCsr->pExpr, 1); +/* +** This function does all the work for both the xConnect and xCreate methods. +** These tables have no persistent representation of their own, so xConnect +** and xCreate are identical operations. +*/ +static int fts3auxConnectMethod( + sqlite3 *db, /* Database connection */ + void *pUnused, /* Unused */ + int argc, /* Number of elements in argv array */ + const char * const *argv, /* xCreate/xConnect argument array */ + sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ + char **pzErr /* OUT: sqlite3_malloc'd error message */ +){ + char const *zDb; /* Name of database (e.g. "main") */ + char const *zFts3; /* Name of fts3 table */ + int nDb; /* Result of strlen(zDb) */ + int nFts3; /* Result of strlen(zFts3) */ + int nByte; /* Bytes of space to allocate here */ + int rc; /* value returned by declare_vtab() */ + Fts3auxTable *p; /* Virtual table object to return */ - sqlite3Fts3SegmentsClose(p); - if( rc!=SQLITE_OK ) return rc; - pCsr->pNextId = pCsr->aDoclist; - pCsr->iPrevId = 0; - } + UNUSED_PARAMETER(pUnused); - /* Compile a SELECT statement for this cursor. For a full-table-scan, the - ** statement loops through all rows of the %_content table. For a - ** full-text query or docid lookup, the statement retrieves a single - ** row by docid. + /* The user should invoke this in one of two forms: + ** + ** CREATE VIRTUAL TABLE xxx USING fts4aux(fts4-table); + ** CREATE VIRTUAL TABLE xxx USING fts4aux(fts4-table-db, fts4-table); */ - if( idxNum==FTS3_FULLSCAN_SEARCH ){ - const char *zSort = (pCsr->bDesc ? "DESC" : "ASC"); - const char *zTmpl = "SELECT %s FROM %Q.'%q_content' AS x ORDER BY docid %s"; - zSql = sqlite3_mprintf(zTmpl, p->zReadExprlist, p->zDb, p->zName, zSort); + if( argc!=4 && argc!=5 ) goto bad_args; + + zDb = argv[1]; + nDb = (int)strlen(zDb); + if( argc==5 ){ + if( nDb==4 && 0==sqlite3_strnicmp("temp", zDb, 4) ){ + zDb = argv[3]; + nDb = (int)strlen(zDb); + zFts3 = argv[4]; + }else{ + goto bad_args; + } }else{ - const char *zTmpl = "SELECT %s FROM %Q.'%q_content' AS x WHERE docid = ?"; - zSql = sqlite3_mprintf(zTmpl, p->zReadExprlist, p->zDb, p->zName); + zFts3 = argv[3]; } - if( !zSql ) return SQLITE_NOMEM; - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); - sqlite3_free(zSql); + nFts3 = (int)strlen(zFts3); + + rc = sqlite3_declare_vtab(db, FTS3_AUX_SCHEMA); if( rc!=SQLITE_OK ) return rc; - if( idxNum==FTS3_DOCID_SEARCH ){ - rc = sqlite3_bind_value(pCsr->pStmt, 1, apVal[0]); - if( rc!=SQLITE_OK ) return rc; - } + nByte = sizeof(Fts3auxTable) + sizeof(Fts3Table) + nDb + nFts3 + 2; + p = (Fts3auxTable *)sqlite3_malloc(nByte); + if( !p ) return SQLITE_NOMEM; + memset(p, 0, nByte); - return fts3NextMethod(pCursor); -} + p->pFts3Tab = (Fts3Table *)&p[1]; + p->pFts3Tab->zDb = (char *)&p->pFts3Tab[1]; + p->pFts3Tab->zName = &p->pFts3Tab->zDb[nDb+1]; + p->pFts3Tab->db = db; + p->pFts3Tab->nIndex = 1; -/* -** This is the xEof method of the virtual table. SQLite calls this -** routine to find out if it has reached the end of a result set. -*/ -static int fts3EofMethod(sqlite3_vtab_cursor *pCursor){ - return ((Fts3Cursor *)pCursor)->isEof; + memcpy((char *)p->pFts3Tab->zDb, zDb, nDb); + memcpy((char *)p->pFts3Tab->zName, zFts3, nFts3); + sqlite3Fts3Dequote((char *)p->pFts3Tab->zName); + + *ppVtab = (sqlite3_vtab *)p; + return SQLITE_OK; + + bad_args: + *pzErr = sqlite3_mprintf("invalid arguments to fts4aux constructor"); + return SQLITE_ERROR; } -/* -** This is the xRowid method. The SQLite core calls this routine to -** retrieve the rowid for the current row of the result set. fts3 -** exposes %_content.docid as the rowid for the virtual table. The -** rowid should be written to *pRowid. +/* +** This function does the work for both the xDisconnect and xDestroy methods. +** These tables have no persistent representation of their own, so xDisconnect +** and xDestroy are identical operations. */ -static int fts3RowidMethod(sqlite3_vtab_cursor *pCursor, sqlite_int64 *pRowid){ - Fts3Cursor *pCsr = (Fts3Cursor *) pCursor; - *pRowid = pCsr->iPrevId; +static int fts3auxDisconnectMethod(sqlite3_vtab *pVtab){ + Fts3auxTable *p = (Fts3auxTable *)pVtab; + Fts3Table *pFts3 = p->pFts3Tab; + int i; + + /* Free any prepared statements held */ + for(i=0; iaStmt); i++){ + sqlite3_finalize(pFts3->aStmt[i]); + } + sqlite3_free(pFts3->zSegmentsTbl); + sqlite3_free(p); return SQLITE_OK; } -/* -** This is the xColumn method, called by SQLite to request a value from -** the row that the supplied cursor currently points to. +#define FTS4AUX_EQ_CONSTRAINT 1 +#define FTS4AUX_GE_CONSTRAINT 2 +#define FTS4AUX_LE_CONSTRAINT 4 + +/* +** xBestIndex - Analyze a WHERE and ORDER BY clause. */ -static int fts3ColumnMethod( - sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ - sqlite3_context *pContext, /* Context for sqlite3_result_xxx() calls */ - int iCol /* Index of column to read value from */ +static int fts3auxBestIndexMethod( + sqlite3_vtab *pVTab, + sqlite3_index_info *pInfo ){ - int rc = SQLITE_OK; /* Return Code */ - Fts3Cursor *pCsr = (Fts3Cursor *) pCursor; - Fts3Table *p = (Fts3Table *)pCursor->pVtab; + int i; + int iEq = -1; + int iGe = -1; + int iLe = -1; + int iLangid = -1; + int iNext = 1; /* Next free argvIndex value */ - /* The column value supplied by SQLite must be in range. */ - assert( iCol>=0 && iCol<=p->nColumn+1 ); + UNUSED_PARAMETER(pVTab); - if( iCol==p->nColumn+1 ){ - /* This call is a request for the "docid" column. Since "docid" is an - ** alias for "rowid", use the xRowid() method to obtain the value. - */ - sqlite3_result_int64(pContext, pCsr->iPrevId); - }else if( iCol==p->nColumn ){ - /* The extra column whose name is the same as the table. - ** Return a blob which is a pointer to the cursor. - */ - sqlite3_result_blob(pContext, &pCsr, sizeof(pCsr), SQLITE_TRANSIENT); - }else{ - rc = fts3CursorSeek(0, pCsr); - if( rc==SQLITE_OK ){ - sqlite3_result_value(pContext, sqlite3_column_value(pCsr->pStmt, iCol+1)); - } + /* This vtab delivers always results in "ORDER BY term ASC" order. */ + if( pInfo->nOrderBy==1 + && pInfo->aOrderBy[0].iColumn==0 + && pInfo->aOrderBy[0].desc==0 + ){ + pInfo->orderByConsumed = 1; } - assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); - return rc; -} + /* Search for equality and range constraints on the "term" column. + ** And equality constraints on the hidden "languageid" column. */ + for(i=0; inConstraint; i++){ + if( pInfo->aConstraint[i].usable ){ + int op = pInfo->aConstraint[i].op; + int iCol = pInfo->aConstraint[i].iColumn; -/* -** This function is the implementation of the xUpdate callback used by -** FTS3 virtual tables. It is invoked by SQLite each time a row is to be -** inserted, updated or deleted. -*/ -static int fts3UpdateMethod( - sqlite3_vtab *pVtab, /* Virtual table handle */ - int nArg, /* Size of argument array */ - sqlite3_value **apVal, /* Array of arguments */ - sqlite_int64 *pRowid /* OUT: The affected (or effected) rowid */ -){ - return sqlite3Fts3UpdateMethod(pVtab, nArg, apVal, pRowid); -} + if( iCol==0 ){ + if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iEq = i; + if( op==SQLITE_INDEX_CONSTRAINT_LT ) iLe = i; + if( op==SQLITE_INDEX_CONSTRAINT_LE ) iLe = i; + if( op==SQLITE_INDEX_CONSTRAINT_GT ) iGe = i; + if( op==SQLITE_INDEX_CONSTRAINT_GE ) iGe = i; + } + if( iCol==4 ){ + if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iLangid = i; + } + } + } -/* -** Implementation of xSync() method. Flush the contents of the pending-terms -** hash-table to the database. -*/ -static int fts3SyncMethod(sqlite3_vtab *pVtab){ - int rc = sqlite3Fts3PendingTermsFlush((Fts3Table *)pVtab); - sqlite3Fts3SegmentsClose((Fts3Table *)pVtab); - return rc; -} + if( iEq>=0 ){ + pInfo->idxNum = FTS4AUX_EQ_CONSTRAINT; + pInfo->aConstraintUsage[iEq].argvIndex = iNext++; + pInfo->estimatedCost = 5; + }else{ + pInfo->idxNum = 0; + pInfo->estimatedCost = 20000; + if( iGe>=0 ){ + pInfo->idxNum += FTS4AUX_GE_CONSTRAINT; + pInfo->aConstraintUsage[iGe].argvIndex = iNext++; + pInfo->estimatedCost /= 2; + } + if( iLe>=0 ){ + pInfo->idxNum += FTS4AUX_LE_CONSTRAINT; + pInfo->aConstraintUsage[iLe].argvIndex = iNext++; + pInfo->estimatedCost /= 2; + } + } + if( iLangid>=0 ){ + pInfo->aConstraintUsage[iLangid].argvIndex = iNext++; + pInfo->estimatedCost--; + } -/* -** Implementation of xBegin() method. This is a no-op. -*/ -static int fts3BeginMethod(sqlite3_vtab *pVtab){ - TESTONLY( Fts3Table *p = (Fts3Table*)pVtab ); - UNUSED_PARAMETER(pVtab); - assert( p->pSegments==0 ); - assert( p->nPendingData==0 ); - assert( p->inTransaction!=1 ); - TESTONLY( p->inTransaction = 1 ); - TESTONLY( p->mxSavepoint = -1; ); return SQLITE_OK; } /* -** Implementation of xCommit() method. This is a no-op. The contents of -** the pending-terms hash-table have already been flushed into the database -** by fts3SyncMethod(). +** xOpen - Open a cursor. */ -static int fts3CommitMethod(sqlite3_vtab *pVtab){ - TESTONLY( Fts3Table *p = (Fts3Table*)pVtab ); - UNUSED_PARAMETER(pVtab); - assert( p->nPendingData==0 ); - assert( p->inTransaction!=0 ); - assert( p->pSegments==0 ); - TESTONLY( p->inTransaction = 0 ); - TESTONLY( p->mxSavepoint = -1; ); - return SQLITE_OK; -} +static int fts3auxOpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ + Fts3auxCursor *pCsr; /* Pointer to cursor object to return */ -/* -** Implementation of xRollback(). Discard the contents of the pending-terms -** hash-table. Any changes made to the database are reverted by SQLite. -*/ -static int fts3RollbackMethod(sqlite3_vtab *pVtab){ - Fts3Table *p = (Fts3Table*)pVtab; - sqlite3Fts3PendingTermsClear(p); - assert( p->inTransaction!=0 ); - TESTONLY( p->inTransaction = 0 ); - TESTONLY( p->mxSavepoint = -1; ); + UNUSED_PARAMETER(pVTab); + + pCsr = (Fts3auxCursor *)sqlite3_malloc(sizeof(Fts3auxCursor)); + if( !pCsr ) return SQLITE_NOMEM; + memset(pCsr, 0, sizeof(Fts3auxCursor)); + + *ppCsr = (sqlite3_vtab_cursor *)pCsr; return SQLITE_OK; } /* -** When called, *ppPoslist must point to the byte immediately following the -** end of a position-list. i.e. ( (*ppPoslist)[-1]==POS_END ). This function -** moves *ppPoslist so that it instead points to the first byte of the -** same position list. +** xClose - Close a cursor. */ -static void fts3ReversePoslist(char *pStart, char **ppPoslist){ - char *p = &(*ppPoslist)[-2]; - char c; +static int fts3auxCloseMethod(sqlite3_vtab_cursor *pCursor){ + Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; + Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; - while( p>pStart && (c=*p--)==0 ); - while( p>pStart && (*p & 0x80) | c ){ - c = *p--; - } - if( p>pStart ){ p = &p[2]; } - while( *p++&0x80 ); - *ppPoslist = p; + sqlite3Fts3SegmentsClose(pFts3); + sqlite3Fts3SegReaderFinish(&pCsr->csr); + sqlite3_free((void *)pCsr->filter.zTerm); + sqlite3_free(pCsr->zStop); + sqlite3_free(pCsr->aStat); + sqlite3_free(pCsr); + return SQLITE_OK; } -/* -** Helper function used by the implementation of the overloaded snippet(), -** offsets() and optimize() SQL functions. -** -** If the value passed as the third argument is a blob of size -** sizeof(Fts3Cursor*), then the blob contents are copied to the -** output variable *ppCsr and SQLITE_OK is returned. Otherwise, an error -** message is written to context pContext and SQLITE_ERROR returned. The -** string passed via zFunc is used as part of the error message. -*/ -static int fts3FunctionArg( - sqlite3_context *pContext, /* SQL function call context */ - const char *zFunc, /* Function name */ - sqlite3_value *pVal, /* argv[0] passed to function */ - Fts3Cursor **ppCsr /* OUT: Store cursor handle here */ -){ - Fts3Cursor *pRet; - if( sqlite3_value_type(pVal)!=SQLITE_BLOB - || sqlite3_value_bytes(pVal)!=sizeof(Fts3Cursor *) - ){ - char *zErr = sqlite3_mprintf("illegal first argument to %s", zFunc); - sqlite3_result_error(pContext, zErr, -1); - sqlite3_free(zErr); - return SQLITE_ERROR; +static int fts3auxGrowStatArray(Fts3auxCursor *pCsr, int nSize){ + if( nSize>pCsr->nStat ){ + struct Fts3auxColstats *aNew; + aNew = (struct Fts3auxColstats *)sqlite3_realloc(pCsr->aStat, + sizeof(struct Fts3auxColstats) * nSize + ); + if( aNew==0 ) return SQLITE_NOMEM; + memset(&aNew[pCsr->nStat], 0, + sizeof(struct Fts3auxColstats) * (nSize - pCsr->nStat) + ); + pCsr->aStat = aNew; + pCsr->nStat = nSize; } - memcpy(&pRet, sqlite3_value_blob(pVal), sizeof(Fts3Cursor *)); - *ppCsr = pRet; return SQLITE_OK; } /* -** Implementation of the snippet() function for FTS3 +** xNext - Advance the cursor to the next row, if any. */ -static void fts3SnippetFunc( - sqlite3_context *pContext, /* SQLite function call context */ - int nVal, /* Size of apVal[] array */ - sqlite3_value **apVal /* Array of arguments */ -){ - Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ - const char *zStart = ""; - const char *zEnd = ""; - const char *zEllipsis = "..."; - int iCol = -1; - int nToken = 15; /* Default number of tokens in snippet */ +static int fts3auxNextMethod(sqlite3_vtab_cursor *pCursor){ + Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; + Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; + int rc; - /* There must be at least one argument passed to this function (otherwise - ** the non-overloaded version would have been called instead of this one). - */ - assert( nVal>=1 ); + /* Increment our pretend rowid value. */ + pCsr->iRowid++; - if( nVal>6 ){ - sqlite3_result_error(pContext, - "wrong number of arguments to function snippet()", -1); - return; + for(pCsr->iCol++; pCsr->iColnStat; pCsr->iCol++){ + if( pCsr->aStat[pCsr->iCol].nDoc>0 ) return SQLITE_OK; } - if( fts3FunctionArg(pContext, "snippet", apVal[0], &pCsr) ) return; - switch( nVal ){ - case 6: nToken = sqlite3_value_int(apVal[5]); - case 5: iCol = sqlite3_value_int(apVal[4]); - case 4: zEllipsis = (const char*)sqlite3_value_text(apVal[3]); - case 3: zEnd = (const char*)sqlite3_value_text(apVal[2]); - case 2: zStart = (const char*)sqlite3_value_text(apVal[1]); - } - if( !zEllipsis || !zEnd || !zStart ){ - sqlite3_result_error_nomem(pContext); - }else if( SQLITE_OK==fts3CursorSeek(pContext, pCsr) ){ - sqlite3Fts3Snippet(pContext, pCsr, zStart, zEnd, zEllipsis, iCol, nToken); + rc = sqlite3Fts3SegReaderStep(pFts3, &pCsr->csr); + if( rc==SQLITE_ROW ){ + int i = 0; + int nDoclist = pCsr->csr.nDoclist; + char *aDoclist = pCsr->csr.aDoclist; + int iCol; + + int eState = 0; + + if( pCsr->zStop ){ + int n = (pCsr->nStopcsr.nTerm) ? pCsr->nStop : pCsr->csr.nTerm; + int mc = memcmp(pCsr->zStop, pCsr->csr.zTerm, n); + if( mc<0 || (mc==0 && pCsr->csr.nTerm>pCsr->nStop) ){ + pCsr->isEof = 1; + return SQLITE_OK; + } + } + + if( fts3auxGrowStatArray(pCsr, 2) ) return SQLITE_NOMEM; + memset(pCsr->aStat, 0, sizeof(struct Fts3auxColstats) * pCsr->nStat); + iCol = 0; + + while( iaStat[0].nDoc++; + eState = 1; + iCol = 0; + break; + + /* State 1. In this state we are expecting either a 1, indicating + ** that the following integer will be a column number, or the + ** start of a position list for column 0. + ** + ** The only difference between state 1 and state 2 is that if the + ** integer encountered in state 1 is not 0 or 1, then we need to + ** increment the column 0 "nDoc" count for this term. + */ + case 1: + assert( iCol==0 ); + if( v>1 ){ + pCsr->aStat[1].nDoc++; + } + eState = 2; + /* fall through */ + + case 2: + if( v==0 ){ /* 0x00. Next integer will be a docid. */ + eState = 0; + }else if( v==1 ){ /* 0x01. Next integer will be a column number. */ + eState = 3; + }else{ /* 2 or greater. A position. */ + pCsr->aStat[iCol+1].nOcc++; + pCsr->aStat[0].nOcc++; + } + break; + + /* State 3. The integer just read is a column number. */ + default: assert( eState==3 ); + iCol = (int)v; + if( fts3auxGrowStatArray(pCsr, iCol+2) ) return SQLITE_NOMEM; + pCsr->aStat[iCol+1].nDoc++; + eState = 2; + break; + } + } + + pCsr->iCol = 0; + rc = SQLITE_OK; + }else{ + pCsr->isEof = 1; } + return rc; } /* -** Implementation of the offsets() function for FTS3 +** xFilter - Initialize a cursor to point at the start of its data. */ -static void fts3OffsetsFunc( - sqlite3_context *pContext, /* SQLite function call context */ - int nVal, /* Size of argument array */ - sqlite3_value **apVal /* Array of arguments */ +static int fts3auxFilterMethod( + sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ + int idxNum, /* Strategy index */ + const char *idxStr, /* Unused */ + int nVal, /* Number of elements in apVal */ + sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ - Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ - - UNUSED_PARAMETER(nVal); - - assert( nVal==1 ); - if( fts3FunctionArg(pContext, "offsets", apVal[0], &pCsr) ) return; - assert( pCsr ); - if( SQLITE_OK==fts3CursorSeek(pContext, pCsr) ){ - sqlite3Fts3Offsets(pContext, pCsr); - } -} + Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; + Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; + int rc; + int isScan = 0; + int iLangVal = 0; /* Language id to query */ -/* -** Implementation of the special optimize() function for FTS3. This -** function merges all segments in the database to a single segment. -** Example usage is: -** -** SELECT optimize(t) FROM t LIMIT 1; -** -** where 't' is the name of an FTS3 table. -*/ -static void fts3OptimizeFunc( - sqlite3_context *pContext, /* SQLite function call context */ - int nVal, /* Size of argument array */ - sqlite3_value **apVal /* Array of arguments */ -){ - int rc; /* Return code */ - Fts3Table *p; /* Virtual table handle */ - Fts3Cursor *pCursor; /* Cursor handle passed through apVal[0] */ + int iEq = -1; /* Index of term=? value in apVal */ + int iGe = -1; /* Index of term>=? value in apVal */ + int iLe = -1; /* Index of term<=? value in apVal */ + int iLangid = -1; /* Index of languageid=? value in apVal */ + int iNext = 0; UNUSED_PARAMETER(nVal); + UNUSED_PARAMETER(idxStr); - assert( nVal==1 ); - if( fts3FunctionArg(pContext, "optimize", apVal[0], &pCursor) ) return; - p = (Fts3Table *)pCursor->base.pVtab; - assert( p ); - - rc = sqlite3Fts3Optimize(p); - - switch( rc ){ - case SQLITE_OK: - sqlite3_result_text(pContext, "Index optimized", -1, SQLITE_STATIC); - break; - case SQLITE_DONE: - sqlite3_result_text(pContext, "Index already optimal", -1, SQLITE_STATIC); - break; - default: - sqlite3_result_error_code(pContext, rc); - break; - } -} + assert( idxStr==0 ); + assert( idxNum==FTS4AUX_EQ_CONSTRAINT || idxNum==0 + || idxNum==FTS4AUX_LE_CONSTRAINT || idxNum==FTS4AUX_GE_CONSTRAINT + || idxNum==(FTS4AUX_LE_CONSTRAINT|FTS4AUX_GE_CONSTRAINT) + ); -/* -** Implementation of the matchinfo() function for FTS3 -*/ -static void fts3MatchinfoFunc( - sqlite3_context *pContext, /* SQLite function call context */ - int nVal, /* Size of argument array */ - sqlite3_value **apVal /* Array of arguments */ -){ - Fts3Cursor *pCsr; /* Cursor handle passed through apVal[0] */ - assert( nVal==1 || nVal==2 ); - if( SQLITE_OK==fts3FunctionArg(pContext, "matchinfo", apVal[0], &pCsr) ){ - const char *zArg = 0; - if( nVal>1 ){ - zArg = (const char *)sqlite3_value_text(apVal[1]); + if( idxNum==FTS4AUX_EQ_CONSTRAINT ){ + iEq = iNext++; + }else{ + isScan = 1; + if( idxNum & FTS4AUX_GE_CONSTRAINT ){ + iGe = iNext++; + } + if( idxNum & FTS4AUX_LE_CONSTRAINT ){ + iLe = iNext++; } - sqlite3Fts3Matchinfo(pContext, pCsr, zArg); } -} + if( iNextfilter.zTerm); + sqlite3Fts3SegReaderFinish(&pCsr->csr); + sqlite3_free((void *)pCsr->filter.zTerm); + sqlite3_free(pCsr->aStat); + memset(&pCsr->csr, 0, ((u8*)&pCsr[1]) - (u8*)&pCsr->csr); - UNUSED_PARAMETER(pVtab); - UNUSED_PARAMETER(nArg); - UNUSED_PARAMETER(ppArg); + pCsr->filter.flags = FTS3_SEGMENT_REQUIRE_POS|FTS3_SEGMENT_IGNORE_EMPTY; + if( isScan ) pCsr->filter.flags |= FTS3_SEGMENT_SCAN; - for(i=0; i=0 || iGe>=0 ){ + const unsigned char *zStr = sqlite3_value_text(apVal[0]); + assert( (iEq==0 && iGe==-1) || (iEq==-1 && iGe==0) ); + if( zStr ){ + pCsr->filter.zTerm = sqlite3_mprintf("%s", zStr); + pCsr->filter.nTerm = sqlite3_value_bytes(apVal[0]); + if( pCsr->filter.zTerm==0 ) return SQLITE_NOMEM; } } - /* No function of the specified name was found. Return 0. */ - return 0; -} - -/* -** Implementation of FTS3 xRename method. Rename an fts3 table. -*/ -static int fts3RenameMethod( - sqlite3_vtab *pVtab, /* Virtual table handle */ - const char *zName /* New name of table */ -){ - Fts3Table *p = (Fts3Table *)pVtab; - sqlite3 *db = p->db; /* Database connection */ - int rc; /* Return Code */ + if( iLe>=0 ){ + pCsr->zStop = sqlite3_mprintf("%s", sqlite3_value_text(apVal[iLe])); + pCsr->nStop = sqlite3_value_bytes(apVal[iLe]); + if( pCsr->zStop==0 ) return SQLITE_NOMEM; + } + + if( iLangid>=0 ){ + iLangVal = sqlite3_value_int(apVal[iLangid]); - rc = sqlite3Fts3PendingTermsFlush(p); - if( rc!=SQLITE_OK ){ - return rc; + /* If the user specified a negative value for the languageid, use zero + ** instead. This works, as the "languageid=?" constraint will also + ** be tested by the VDBE layer. The test will always be false (since + ** this module will not return a row with a negative languageid), and + ** so the overall query will return zero rows. */ + if( iLangVal<0 ) iLangVal = 0; } + pCsr->iLangid = iLangVal; - fts3DbExec(&rc, db, - "ALTER TABLE %Q.'%q_content' RENAME TO '%q_content';", - p->zDb, p->zName, zName + rc = sqlite3Fts3SegReaderCursor(pFts3, iLangVal, 0, FTS3_SEGCURSOR_ALL, + pCsr->filter.zTerm, pCsr->filter.nTerm, 0, isScan, &pCsr->csr ); - if( p->bHasDocsize ){ - fts3DbExec(&rc, db, - "ALTER TABLE %Q.'%q_docsize' RENAME TO '%q_docsize';", - p->zDb, p->zName, zName - ); - } - if( p->bHasStat ){ - fts3DbExec(&rc, db, - "ALTER TABLE %Q.'%q_stat' RENAME TO '%q_stat';", - p->zDb, p->zName, zName - ); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3SegReaderStart(pFts3, &pCsr->csr, &pCsr->filter); } - fts3DbExec(&rc, db, - "ALTER TABLE %Q.'%q_segments' RENAME TO '%q_segments';", - p->zDb, p->zName, zName - ); - fts3DbExec(&rc, db, - "ALTER TABLE %Q.'%q_segdir' RENAME TO '%q_segdir';", - p->zDb, p->zName, zName - ); - return rc; -} -static int fts3SavepointMethod(sqlite3_vtab *pVtab, int iSavepoint){ - UNUSED_PARAMETER(iSavepoint); - assert( ((Fts3Table *)pVtab)->inTransaction ); - assert( ((Fts3Table *)pVtab)->mxSavepoint < iSavepoint ); - TESTONLY( ((Fts3Table *)pVtab)->mxSavepoint = iSavepoint ); - return fts3SyncMethod(pVtab); -} -static int fts3ReleaseMethod(sqlite3_vtab *pVtab, int iSavepoint){ - TESTONLY( Fts3Table *p = (Fts3Table*)pVtab ); - UNUSED_PARAMETER(iSavepoint); - UNUSED_PARAMETER(pVtab); - assert( p->inTransaction ); - assert( p->mxSavepoint >= iSavepoint ); - TESTONLY( p->mxSavepoint = iSavepoint-1 ); - return SQLITE_OK; -} -static int fts3RollbackToMethod(sqlite3_vtab *pVtab, int iSavepoint){ - Fts3Table *p = (Fts3Table*)pVtab; - UNUSED_PARAMETER(iSavepoint); - assert( p->inTransaction ); - assert( p->mxSavepoint >= iSavepoint ); - TESTONLY( p->mxSavepoint = iSavepoint ); - sqlite3Fts3PendingTermsClear(p); - return SQLITE_OK; + if( rc==SQLITE_OK ) rc = fts3auxNextMethod(pCursor); + return rc; } -static const sqlite3_module fts3Module = { - /* iVersion */ 2, - /* xCreate */ fts3CreateMethod, - /* xConnect */ fts3ConnectMethod, - /* xBestIndex */ fts3BestIndexMethod, - /* xDisconnect */ fts3DisconnectMethod, - /* xDestroy */ fts3DestroyMethod, - /* xOpen */ fts3OpenMethod, - /* xClose */ fts3CloseMethod, - /* xFilter */ fts3FilterMethod, - /* xNext */ fts3NextMethod, - /* xEof */ fts3EofMethod, - /* xColumn */ fts3ColumnMethod, - /* xRowid */ fts3RowidMethod, - /* xUpdate */ fts3UpdateMethod, - /* xBegin */ fts3BeginMethod, - /* xSync */ fts3SyncMethod, - /* xCommit */ fts3CommitMethod, - /* xRollback */ fts3RollbackMethod, - /* xFindFunction */ fts3FindFunctionMethod, - /* xRename */ fts3RenameMethod, - /* xSavepoint */ fts3SavepointMethod, - /* xRelease */ fts3ReleaseMethod, - /* xRollbackTo */ fts3RollbackToMethod, -}; - /* -** This function is registered as the module destructor (called when an -** FTS3 enabled database connection is closed). It frees the memory -** allocated for the tokenizer hash table. +** xEof - Return true if the cursor is at EOF, or false otherwise. */ -static void hashDestroy(void *p){ - Fts3Hash *pHash = (Fts3Hash *)p; - sqlite3Fts3HashClear(pHash); - sqlite3_free(pHash); +static int fts3auxEofMethod(sqlite3_vtab_cursor *pCursor){ + Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; + return pCsr->isEof; } /* -** The fts3 built-in tokenizers - "simple", "porter" and "icu"- are -** implemented in files fts3_tokenizer1.c, fts3_porter.c and fts3_icu.c -** respectively. The following three forward declarations are for functions -** declared in these files used to retrieve the respective implementations. -** -** Calling sqlite3Fts3SimpleTokenizerModule() sets the value pointed -** to by the argument to point to the "simple" tokenizer implementation. -** And so on. -*/ -SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule); -SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule(sqlite3_tokenizer_module const**ppModule); -#ifdef SQLITE_ENABLE_ICU -SQLITE_PRIVATE void sqlite3Fts3IcuTokenizerModule(sqlite3_tokenizer_module const**ppModule); -#endif - -/* -** Initialise the fts3 extension. If this extension is built as part -** of the sqlite library, then this function is called directly by -** SQLite. If fts3 is built as a dynamically loadable extension, this -** function is called by the sqlite3_extension_init() entry point. +** xColumn - Return a column value. */ -SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){ - int rc = SQLITE_OK; - Fts3Hash *pHash = 0; - const sqlite3_tokenizer_module *pSimple = 0; - const sqlite3_tokenizer_module *pPorter = 0; +static int fts3auxColumnMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite3_context *pCtx, /* Context for sqlite3_result_xxx() calls */ + int iCol /* Index of column to read value from */ +){ + Fts3auxCursor *p = (Fts3auxCursor *)pCursor; -#ifdef SQLITE_ENABLE_ICU - const sqlite3_tokenizer_module *pIcu = 0; - sqlite3Fts3IcuTokenizerModule(&pIcu); -#endif + assert( p->isEof==0 ); + switch( iCol ){ + case 0: /* term */ + sqlite3_result_text(pCtx, p->csr.zTerm, p->csr.nTerm, SQLITE_TRANSIENT); + break; -#ifdef SQLITE_TEST - rc = sqlite3Fts3InitTerm(db); - if( rc!=SQLITE_OK ) return rc; -#endif + case 1: /* col */ + if( p->iCol ){ + sqlite3_result_int(pCtx, p->iCol-1); + }else{ + sqlite3_result_text(pCtx, "*", -1, SQLITE_STATIC); + } + break; - rc = sqlite3Fts3InitAux(db); - if( rc!=SQLITE_OK ) return rc; + case 2: /* documents */ + sqlite3_result_int64(pCtx, p->aStat[p->iCol].nDoc); + break; - sqlite3Fts3SimpleTokenizerModule(&pSimple); - sqlite3Fts3PorterTokenizerModule(&pPorter); + case 3: /* occurrences */ + sqlite3_result_int64(pCtx, p->aStat[p->iCol].nOcc); + break; - /* Allocate and initialise the hash-table used to store tokenizers. */ - pHash = sqlite3_malloc(sizeof(Fts3Hash)); - if( !pHash ){ - rc = SQLITE_NOMEM; - }else{ - sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); + default: /* languageid */ + assert( iCol==4 ); + sqlite3_result_int(pCtx, p->iLangid); + break; } - /* Load the built-in tokenizers into the hash table */ - if( rc==SQLITE_OK ){ - if( sqlite3Fts3HashInsert(pHash, "simple", 7, (void *)pSimple) - || sqlite3Fts3HashInsert(pHash, "porter", 7, (void *)pPorter) -#ifdef SQLITE_ENABLE_ICU - || (pIcu && sqlite3Fts3HashInsert(pHash, "icu", 4, (void *)pIcu)) -#endif - ){ - rc = SQLITE_NOMEM; - } - } + return SQLITE_OK; +} -#ifdef SQLITE_TEST - if( rc==SQLITE_OK ){ - rc = sqlite3Fts3ExprInitTestInterface(db); - } -#endif +/* +** xRowid - Return the current rowid for the cursor. +*/ +static int fts3auxRowidMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite_int64 *pRowid /* OUT: Rowid value */ +){ + Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; + *pRowid = pCsr->iRowid; + return SQLITE_OK; +} - /* Create the virtual table wrapper around the hash-table and overload - ** the two scalar functions. If this is successful, register the - ** module with sqlite. - */ - if( SQLITE_OK==rc - && SQLITE_OK==(rc = sqlite3Fts3InitHashTable(db, pHash, "fts3_tokenizer")) - && SQLITE_OK==(rc = sqlite3_overload_function(db, "snippet", -1)) - && SQLITE_OK==(rc = sqlite3_overload_function(db, "offsets", 1)) - && SQLITE_OK==(rc = sqlite3_overload_function(db, "matchinfo", 1)) - && SQLITE_OK==(rc = sqlite3_overload_function(db, "matchinfo", 2)) - && SQLITE_OK==(rc = sqlite3_overload_function(db, "optimize", 1)) - ){ - rc = sqlite3_create_module_v2( - db, "fts3", &fts3Module, (void *)pHash, hashDestroy - ); - if( rc==SQLITE_OK ){ - rc = sqlite3_create_module_v2( - db, "fts4", &fts3Module, (void *)pHash, 0 - ); - } - return rc; - } +/* +** Register the fts3aux module with database connection db. Return SQLITE_OK +** if successful or an error code if sqlite3_create_module() fails. +*/ +SQLITE_PRIVATE int sqlite3Fts3InitAux(sqlite3 *db){ + static const sqlite3_module fts3aux_module = { + 0, /* iVersion */ + fts3auxConnectMethod, /* xCreate */ + fts3auxConnectMethod, /* xConnect */ + fts3auxBestIndexMethod, /* xBestIndex */ + fts3auxDisconnectMethod, /* xDisconnect */ + fts3auxDisconnectMethod, /* xDestroy */ + fts3auxOpenMethod, /* xOpen */ + fts3auxCloseMethod, /* xClose */ + fts3auxFilterMethod, /* xFilter */ + fts3auxNextMethod, /* xNext */ + fts3auxEofMethod, /* xEof */ + fts3auxColumnMethod, /* xColumn */ + fts3auxRowidMethod, /* xRowid */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindFunction */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ + }; + int rc; /* Return code */ - /* An error has occurred. Delete the hash table and return the error code. */ - assert( rc!=SQLITE_OK ); - if( pHash ){ - sqlite3Fts3HashClear(pHash); - sqlite3_free(pHash); - } + rc = sqlite3_create_module(db, "fts4aux", &fts3aux_module, 0); return rc; } -#if !SQLITE_CORE -SQLITE_API int sqlite3_extension_init( - sqlite3 *db, - char **pzErrMsg, - const sqlite3_api_routines *pApi -){ - SQLITE_EXTENSION_INIT2(pApi) - return sqlite3Fts3Init(db); -} -#endif - +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ +/************** End of fts3_aux.c ********************************************/ +/************** Begin file fts3_expr.c ***************************************/ /* -** Allocate an Fts3MultiSegReader for each token in the expression headed -** by pExpr. +** 2008 Nov 28 ** -** An Fts3SegReader object is a cursor that can seek or scan a range of -** entries within a single segment b-tree. An Fts3MultiSegReader uses multiple -** Fts3SegReader objects internally to provide an interface to seek or scan -** within the union of all segments of a b-tree. Hence the name. +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** If the allocated Fts3MultiSegReader just seeks to a single entry in a -** segment b-tree (if the term is not a prefix or it is a prefix for which -** there exists prefix b-tree of the right length) then it may be traversed -** and merged incrementally. Otherwise, it has to be merged into an in-memory -** doclist and then traversed. +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This module contains code that implements a parser for fts3 query strings +** (the right-hand argument to the MATCH operator). Because the supported +** syntax is relatively simple, the whole tokenizer/parser system is +** hand-coded. */ -static void fts3EvalAllocateReaders( - Fts3Cursor *pCsr, - Fts3Expr *pExpr, - int *pnToken, /* OUT: Total number of tokens in phrase. */ - int *pnOr, /* OUT: Total number of OR nodes in expr. */ - int *pRc -){ - if( pExpr && SQLITE_OK==*pRc ){ - if( pExpr->eType==FTSQUERY_PHRASE ){ - int i; - int nToken = pExpr->pPhrase->nToken; - *pnToken += nToken; - for(i=0; ipPhrase->aToken[i]; - int rc = sqlite3Fts3TermSegReaderCursor(pCsr, - pToken->z, pToken->n, pToken->isPrefix, &pToken->pSegcsr - ); - if( rc!=SQLITE_OK ){ - *pRc = rc; - return; - } - } - assert( pExpr->pPhrase->iDoclistToken==0 ); - pExpr->pPhrase->iDoclistToken = -1; - }else{ - *pnOr += (pExpr->eType==FTSQUERY_OR); - fts3EvalAllocateReaders(pCsr, pExpr->pLeft, pnToken, pnOr, pRc); - fts3EvalAllocateReaders(pCsr, pExpr->pRight, pnToken, pnOr, pRc); - } - } -} - -static void fts3EvalPhraseMergeToken( - Fts3Table *pTab, - Fts3Phrase *p, - int iToken, - char *pList, - int nList -){ - assert( iToken!=p->iDoclistToken ); +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - if( pList==0 ){ - sqlite3_free(p->doclist.aAll); - p->doclist.aAll = 0; - p->doclist.nAll = 0; - } +/* +** By default, this module parses the legacy syntax that has been +** traditionally used by fts3. Or, if SQLITE_ENABLE_FTS3_PARENTHESIS +** is defined, then it uses the new syntax. The differences between +** the new and the old syntaxes are: +** +** a) The new syntax supports parenthesis. The old does not. +** +** b) The new syntax supports the AND and NOT operators. The old does not. +** +** c) The old syntax supports the "-" token qualifier. This is not +** supported by the new syntax (it is replaced by the NOT operator). +** +** d) When using the old syntax, the OR operator has a greater precedence +** than an implicit AND. When using the new, both implicity and explicit +** AND operators have a higher precedence than OR. +** +** If compiled with SQLITE_TEST defined, then this module exports the +** symbol "int sqlite3_fts3_enable_parentheses". Setting this variable +** to zero causes the module to use the old syntax. If it is set to +** non-zero the new syntax is activated. This is so both syntaxes can +** be tested using a single build of testfixture. +** +** The following describes the syntax supported by the fts3 MATCH +** operator in a similar format to that used by the lemon parser +** generator. This module does not use actually lemon, it uses a +** custom parser. +** +** query ::= andexpr (OR andexpr)*. +** +** andexpr ::= notexpr (AND? notexpr)*. +** +** notexpr ::= nearexpr (NOT nearexpr|-TOKEN)*. +** notexpr ::= LP query RP. +** +** nearexpr ::= phrase (NEAR distance_opt nearexpr)*. +** +** distance_opt ::= . +** distance_opt ::= / INTEGER. +** +** phrase ::= TOKEN. +** phrase ::= COLUMN:TOKEN. +** phrase ::= "TOKEN TOKEN TOKEN...". +*/ - else if( p->iDoclistToken<0 ){ - p->doclist.aAll = pList; - p->doclist.nAll = nList; - } +#ifdef SQLITE_TEST +SQLITE_API int sqlite3_fts3_enable_parentheses = 0; +#else +# ifdef SQLITE_ENABLE_FTS3_PARENTHESIS +# define sqlite3_fts3_enable_parentheses 1 +# else +# define sqlite3_fts3_enable_parentheses 0 +# endif +#endif - else if( p->doclist.aAll==0 ){ - sqlite3_free(pList); - } +/* +** Default span for NEAR operators. +*/ +#define SQLITE_FTS3_DEFAULT_NEAR_PARAM 10 - else { - char *pLeft; - char *pRight; - int nLeft; - int nRight; - int nDiff; +/* #include */ +/* #include */ - if( p->iDoclistTokendoclist.aAll; - nLeft = p->doclist.nAll; - pRight = pList; - nRight = nList; - nDiff = iToken - p->iDoclistToken; - }else{ - pRight = p->doclist.aAll; - nRight = p->doclist.nAll; - pLeft = pList; - nLeft = nList; - nDiff = p->iDoclistToken - iToken; - } +/* +** isNot: +** This variable is used by function getNextNode(). When getNextNode() is +** called, it sets ParseContext.isNot to true if the 'next node' is a +** FTSQUERY_PHRASE with a unary "-" attached to it. i.e. "mysql" in the +** FTS3 query "sqlite -mysql". Otherwise, ParseContext.isNot is set to +** zero. +*/ +typedef struct ParseContext ParseContext; +struct ParseContext { + sqlite3_tokenizer *pTokenizer; /* Tokenizer module */ + int iLangid; /* Language id used with tokenizer */ + const char **azCol; /* Array of column names for fts3 table */ + int bFts4; /* True to allow FTS4-only syntax */ + int nCol; /* Number of entries in azCol[] */ + int iDefaultCol; /* Default column to query */ + int isNot; /* True if getNextNode() sees a unary - */ + sqlite3_context *pCtx; /* Write error message here */ + int nNest; /* Number of nested brackets */ +}; - fts3DoclistPhraseMerge(pTab->bDescIdx, nDiff, pLeft, nLeft, pRight,&nRight); - sqlite3_free(pLeft); - p->doclist.aAll = pRight; - p->doclist.nAll = nRight; - } +/* +** This function is equivalent to the standard isspace() function. +** +** The standard isspace() can be awkward to use safely, because although it +** is defined to accept an argument of type int, its behavior when passed +** an integer that falls outside of the range of the unsigned char type +** is undefined (and sometimes, "undefined" means segfault). This wrapper +** is defined to accept an argument of type char, and always returns 0 for +** any values that fall outside of the range of the unsigned char type (i.e. +** negative values). +*/ +static int fts3isspace(char c){ + return c==' ' || c=='\t' || c=='\n' || c=='\r' || c=='\v' || c=='\f'; +} - if( iToken>p->iDoclistToken ) p->iDoclistToken = iToken; +/* +** Allocate nByte bytes of memory using sqlite3_malloc(). If successful, +** zero the memory before returning a pointer to it. If unsuccessful, +** return NULL. +*/ +static void *fts3MallocZero(int nByte){ + void *pRet = sqlite3_malloc(nByte); + if( pRet ) memset(pRet, 0, nByte); + return pRet; } -static int fts3EvalPhraseLoad( - Fts3Cursor *pCsr, - Fts3Phrase *p +SQLITE_PRIVATE int sqlite3Fts3OpenTokenizer( + sqlite3_tokenizer *pTokenizer, + int iLangid, + const char *z, + int n, + sqlite3_tokenizer_cursor **ppCsr ){ - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - int iToken; - int rc = SQLITE_OK; - - for(iToken=0; rc==SQLITE_OK && iTokennToken; iToken++){ - Fts3PhraseToken *pToken = &p->aToken[iToken]; - assert( pToken->pDeferred==0 || pToken->pSegcsr==0 ); + sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; + sqlite3_tokenizer_cursor *pCsr = 0; + int rc; - if( pToken->pSegcsr ){ - int nThis = 0; - char *pThis = 0; - rc = fts3TermSelect(pTab, pToken, p->iColumn, 1, &nThis, &pThis); - if( rc==SQLITE_OK ){ - fts3EvalPhraseMergeToken(pTab, p, iToken, pThis, nThis); + rc = pModule->xOpen(pTokenizer, z, n, &pCsr); + assert( rc==SQLITE_OK || pCsr==0 ); + if( rc==SQLITE_OK ){ + pCsr->pTokenizer = pTokenizer; + if( pModule->iVersion>=1 ){ + rc = pModule->xLanguageid(pCsr, iLangid); + if( rc!=SQLITE_OK ){ + pModule->xClose(pCsr); + pCsr = 0; } } - assert( pToken->pSegcsr==0 ); } - + *ppCsr = pCsr; return rc; } -static int fts3EvalDeferredPhrase(Fts3Cursor *pCsr, Fts3Phrase *pPhrase){ - int iToken; - int rc = SQLITE_OK; - - int nMaxUndeferred = pPhrase->iDoclistToken; - char *aPoslist = 0; - int nPoslist = 0; - int iPrev = -1; - - assert( pPhrase->doclist.bFreeList==0 ); - - for(iToken=0; rc==SQLITE_OK && iTokennToken; iToken++){ - Fts3PhraseToken *pToken = &pPhrase->aToken[iToken]; - Fts3DeferredToken *pDeferred = pToken->pDeferred; +/* +** Function getNextNode(), which is called by fts3ExprParse(), may itself +** call fts3ExprParse(). So this forward declaration is required. +*/ +static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *); - if( pDeferred ){ - char *pList; - int nList; - rc = sqlite3Fts3DeferredTokenList(pDeferred, &pList, &nList); - if( rc!=SQLITE_OK ) return rc; +/* +** Extract the next token from buffer z (length n) using the tokenizer +** and other information (column names etc.) in pParse. Create an Fts3Expr +** structure of type FTSQUERY_PHRASE containing a phrase consisting of this +** single token and set *ppExpr to point to it. If the end of the buffer is +** reached before a token is found, set *ppExpr to zero. It is the +** responsibility of the caller to eventually deallocate the allocated +** Fts3Expr structure (if any) by passing it to sqlite3_free(). +** +** Return SQLITE_OK if successful, or SQLITE_NOMEM if a memory allocation +** fails. +*/ +static int getNextToken( + ParseContext *pParse, /* fts3 query parse context */ + int iCol, /* Value for Fts3Phrase.iColumn */ + const char *z, int n, /* Input string */ + Fts3Expr **ppExpr, /* OUT: expression */ + int *pnConsumed /* OUT: Number of bytes consumed */ +){ + sqlite3_tokenizer *pTokenizer = pParse->pTokenizer; + sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; + int rc; + sqlite3_tokenizer_cursor *pCursor; + Fts3Expr *pRet = 0; + int i = 0; - if( pList==0 ){ - sqlite3_free(aPoslist); - pPhrase->doclist.pList = 0; - pPhrase->doclist.nList = 0; - return SQLITE_OK; + /* Set variable i to the maximum number of bytes of input to tokenize. */ + for(i=0; iiLangid, z, i, &pCursor); + if( rc==SQLITE_OK ){ + const char *zToken; + int nToken = 0, iStart = 0, iEnd = 0, iPosition = 0; + int nByte; /* total space to allocate */ + rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition); + if( rc==SQLITE_OK ){ + nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken; + pRet = (Fts3Expr *)fts3MallocZero(nByte); + if( !pRet ){ + rc = SQLITE_NOMEM; }else{ - char *aOut = pList; - char *p1 = aPoslist; - char *p2 = aOut; + pRet->eType = FTSQUERY_PHRASE; + pRet->pPhrase = (Fts3Phrase *)&pRet[1]; + pRet->pPhrase->nToken = 1; + pRet->pPhrase->iColumn = iCol; + pRet->pPhrase->aToken[0].n = nToken; + pRet->pPhrase->aToken[0].z = (char *)&pRet->pPhrase[1]; + memcpy(pRet->pPhrase->aToken[0].z, zToken, nToken); - assert( iPrev>=0 ); - fts3PoslistPhraseMerge(&aOut, iToken-iPrev, 0, 1, &p1, &p2); - sqlite3_free(aPoslist); - aPoslist = pList; - nPoslist = aOut - aPoslist; - if( nPoslist==0 ){ - sqlite3_free(aPoslist); - pPhrase->doclist.pList = 0; - pPhrase->doclist.nList = 0; - return SQLITE_OK; + if( iEndpPhrase->aToken[0].isPrefix = 1; + iEnd++; } - } - iPrev = iToken; - } - } - - if( iPrev>=0 ){ - if( nMaxUndeferred<0 ){ - pPhrase->doclist.pList = aPoslist; - pPhrase->doclist.nList = nPoslist; - pPhrase->doclist.iDocid = pCsr->iPrevId; - pPhrase->doclist.bFreeList = 1; - }else{ - int nDistance; - char *p1; - char *p2; - char *aOut; - if( nMaxUndeferred>iPrev ){ - p1 = aPoslist; - p2 = pPhrase->doclist.pList; - nDistance = nMaxUndeferred - iPrev; - }else{ - p1 = pPhrase->doclist.pList; - p2 = aPoslist; - nDistance = iPrev - nMaxUndeferred; - } + while( 1 ){ + if( !sqlite3_fts3_enable_parentheses + && iStart>0 && z[iStart-1]=='-' + ){ + pParse->isNot = 1; + iStart--; + }else if( pParse->bFts4 && iStart>0 && z[iStart-1]=='^' ){ + pRet->pPhrase->aToken[0].bFirst = 1; + iStart--; + }else{ + break; + } + } - aOut = (char *)sqlite3_malloc(nPoslist+8); - if( !aOut ){ - sqlite3_free(aPoslist); - return SQLITE_NOMEM; - } - - pPhrase->doclist.pList = aOut; - if( fts3PoslistPhraseMerge(&aOut, nDistance, 0, 1, &p1, &p2) ){ - pPhrase->doclist.bFreeList = 1; - pPhrase->doclist.nList = (aOut - pPhrase->doclist.pList); - }else{ - sqlite3_free(aOut); - pPhrase->doclist.pList = 0; - pPhrase->doclist.nList = 0; } - sqlite3_free(aPoslist); + *pnConsumed = iEnd; + }else if( i && rc==SQLITE_DONE ){ + rc = SQLITE_OK; } - } - - return SQLITE_OK; -} - -/* -** This function is called for each Fts3Phrase in a full-text query -** expression to initialize the mechanism for returning rows. Once this -** function has been called successfully on an Fts3Phrase, it may be -** used with fts3EvalPhraseNext() to iterate through the matching docids. -*/ -static int fts3EvalPhraseStart(Fts3Cursor *pCsr, int bOptOk, Fts3Phrase *p){ - int rc; - Fts3PhraseToken *pFirst = &p->aToken[0]; - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - - if( pCsr->bDesc==pTab->bDescIdx - && bOptOk==1 - && p->nToken==1 - && pFirst->pSegcsr - && pFirst->pSegcsr->bLookup - ){ - /* Use the incremental approach. */ - int iCol = (p->iColumn >= pTab->nColumn ? -1 : p->iColumn); - rc = sqlite3Fts3MsrIncrStart( - pTab, pFirst->pSegcsr, iCol, pFirst->z, pFirst->n); - p->bIncr = 1; - }else{ - /* Load the full doclist for the phrase into memory. */ - rc = fts3EvalPhraseLoad(pCsr, p); - p->bIncr = 0; + pModule->xClose(pCursor); } - - assert( rc!=SQLITE_OK || p->nToken<1 || p->aToken[0].pSegcsr==0 || p->bIncr ); + + *ppExpr = pRet; return rc; } + /* -** This function is used to iterate backwards (from the end to start) -** through doclists. +** Enlarge a memory allocation. If an out-of-memory allocation occurs, +** then free the old allocation. */ -SQLITE_PRIVATE void sqlite3Fts3DoclistPrev( - int bDescIdx, /* True if the doclist is desc */ - char *aDoclist, /* Pointer to entire doclist */ - int nDoclist, /* Length of aDoclist in bytes */ - char **ppIter, /* IN/OUT: Iterator pointer */ - sqlite3_int64 *piDocid, /* IN/OUT: Docid pointer */ - int *pnList, /* IN/OUT: List length pointer */ - u8 *pbEof /* OUT: End-of-file flag */ -){ - char *p = *ppIter; - - assert( nDoclist>0 ); - assert( *pbEof==0 ); - assert( p || *piDocid==0 ); - assert( !p || (p>aDoclist && p<&aDoclist[nDoclist]) ); - - if( p==0 ){ - sqlite3_int64 iDocid = 0; - char *pNext = 0; - char *pDocid = aDoclist; - char *pEnd = &aDoclist[nDoclist]; - int iMul = 1; - - while( pDociddoclist; - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + sqlite3_tokenizer *pTokenizer = pParse->pTokenizer; + sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; + int rc; + Fts3Expr *p = 0; + sqlite3_tokenizer_cursor *pCursor = 0; + char *zTemp = 0; + int nTemp = 0; - if( p->bIncr ){ - assert( p->nToken==1 ); - assert( pDL->pNextDocid==0 ); - rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr, - &pDL->iDocid, &pDL->pList, &pDL->nList - ); - if( rc==SQLITE_OK && !pDL->pList ){ - *pbEof = 1; - } - }else if( pCsr->bDesc!=pTab->bDescIdx && pDL->nAll ){ - sqlite3Fts3DoclistPrev(pTab->bDescIdx, pDL->aAll, pDL->nAll, - &pDL->pNextDocid, &pDL->iDocid, &pDL->nList, pbEof - ); - pDL->pList = pDL->pNextDocid; - }else{ - char *pIter; /* Used to iterate through aAll */ - char *pEnd = &pDL->aAll[pDL->nAll]; /* 1 byte past end of aAll */ - if( pDL->pNextDocid ){ - pIter = pDL->pNextDocid; - }else{ - pIter = pDL->aAll; - } + const int nSpace = sizeof(Fts3Expr) + sizeof(Fts3Phrase); + int nToken = 0; - if( pIter>=pEnd ){ - /* We have already reached the end of this doclist. EOF. */ - *pbEof = 1; - }else{ - sqlite3_int64 iDelta; - pIter += sqlite3Fts3GetVarint(pIter, &iDelta); - if( pTab->bDescIdx==0 || pDL->pNextDocid==0 ){ - pDL->iDocid += iDelta; - }else{ - pDL->iDocid -= iDelta; - } - pDL->pList = pIter; - fts3PoslistCopy(0, &pIter); - pDL->nList = (pIter - pDL->pList); - - /* pIter now points just past the 0x00 that terminates the position- - ** list for document pDL->iDocid. However, if this position-list was - ** edited in place by fts3EvalNearTrim2(), then pIter may not actually - ** point to the start of the next docid value. The following line deals - ** with this case by advancing pIter past the zero-padding added by - ** fts3EvalNearTrim2(). */ - while( pIterpNextDocid = pIter; - assert( pIter>=&pDL->aAll[pDL->nAll] || *pIter ); - *pbEof = 0; - } - } + /* The final Fts3Expr data structure, including the Fts3Phrase, + ** Fts3PhraseToken structures token buffers are all stored as a single + ** allocation so that the expression can be freed with a single call to + ** sqlite3_free(). Setting this up requires a two pass approach. + ** + ** The first pass, in the block below, uses a tokenizer cursor to iterate + ** through the tokens in the expression. This pass uses fts3ReallocOrFree() + ** to assemble data in two dynamic buffers: + ** + ** Buffer p: Points to the Fts3Expr structure, followed by the Fts3Phrase + ** structure, followed by the array of Fts3PhraseToken + ** structures. This pass only populates the Fts3PhraseToken array. + ** + ** Buffer zTemp: Contains copies of all tokens. + ** + ** The second pass, in the block that begins "if( rc==SQLITE_DONE )" below, + ** appends buffer zTemp to buffer p, and fills in the Fts3Expr and Fts3Phrase + ** structures. + */ + rc = sqlite3Fts3OpenTokenizer( + pTokenizer, pParse->iLangid, zInput, nInput, &pCursor); + if( rc==SQLITE_OK ){ + int ii; + for(ii=0; rc==SQLITE_OK; ii++){ + const char *zByte; + int nByte = 0, iBegin = 0, iEnd = 0, iPos = 0; + rc = pModule->xNext(pCursor, &zByte, &nByte, &iBegin, &iEnd, &iPos); + if( rc==SQLITE_OK ){ + Fts3PhraseToken *pToken; - return rc; -} + p = fts3ReallocOrFree(p, nSpace + ii*sizeof(Fts3PhraseToken)); + if( !p ) goto no_mem; -static void fts3EvalStartReaders( - Fts3Cursor *pCsr, - Fts3Expr *pExpr, - int bOptOk, - int *pRc -){ - if( pExpr && SQLITE_OK==*pRc ){ - if( pExpr->eType==FTSQUERY_PHRASE ){ - int i; - int nToken = pExpr->pPhrase->nToken; - for(i=0; ipPhrase->aToken[i].pDeferred==0 ) break; - } - pExpr->bDeferred = (i==nToken); - *pRc = fts3EvalPhraseStart(pCsr, bOptOk, pExpr->pPhrase); - }else{ - fts3EvalStartReaders(pCsr, pExpr->pLeft, bOptOk, pRc); - fts3EvalStartReaders(pCsr, pExpr->pRight, bOptOk, pRc); - pExpr->bDeferred = (pExpr->pLeft->bDeferred && pExpr->pRight->bDeferred); - } - } -} + zTemp = fts3ReallocOrFree(zTemp, nTemp + nByte); + if( !zTemp ) goto no_mem; -typedef struct Fts3TokenAndCost Fts3TokenAndCost; -struct Fts3TokenAndCost { - Fts3Phrase *pPhrase; /* The phrase the token belongs to */ - int iToken; /* Position of token in phrase */ - Fts3PhraseToken *pToken; /* The token itself */ - Fts3Expr *pRoot; - int nOvfl; - int iCol; /* The column the token must match */ -}; + assert( nToken==ii ); + pToken = &((Fts3Phrase *)(&p[1]))->aToken[ii]; + memset(pToken, 0, sizeof(Fts3PhraseToken)); -static void fts3EvalTokenCosts( - Fts3Cursor *pCsr, - Fts3Expr *pRoot, - Fts3Expr *pExpr, - Fts3TokenAndCost **ppTC, - Fts3Expr ***ppOr, - int *pRc -){ - if( *pRc==SQLITE_OK && pExpr ){ - if( pExpr->eType==FTSQUERY_PHRASE ){ - Fts3Phrase *pPhrase = pExpr->pPhrase; - int i; - for(i=0; *pRc==SQLITE_OK && inToken; i++){ - Fts3TokenAndCost *pTC = (*ppTC)++; - pTC->pPhrase = pPhrase; - pTC->iToken = i; - pTC->pRoot = pRoot; - pTC->pToken = &pPhrase->aToken[i]; - pTC->iCol = pPhrase->iColumn; - *pRc = sqlite3Fts3MsrOvfl(pCsr, pTC->pToken->pSegcsr, &pTC->nOvfl); - } - }else if( pExpr->eType!=FTSQUERY_NOT ){ - if( pExpr->eType==FTSQUERY_OR ){ - pRoot = pExpr->pLeft; - **ppOr = pRoot; - (*ppOr)++; - } - fts3EvalTokenCosts(pCsr, pRoot, pExpr->pLeft, ppTC, ppOr, pRc); - if( pExpr->eType==FTSQUERY_OR ){ - pRoot = pExpr->pRight; - **ppOr = pRoot; - (*ppOr)++; + memcpy(&zTemp[nTemp], zByte, nByte); + nTemp += nByte; + + pToken->n = nByte; + pToken->isPrefix = (iEndbFirst = (iBegin>0 && zInput[iBegin-1]=='^'); + nToken = ii+1; } - fts3EvalTokenCosts(pCsr, pRoot, pExpr->pRight, ppTC, ppOr, pRc); } + + pModule->xClose(pCursor); + pCursor = 0; } -} -static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){ - if( pCsr->nRowAvg==0 ){ - /* The average document size, which is required to calculate the cost - ** of each doclist, has not yet been determined. Read the required - ** data from the %_stat table to calculate it. - ** - ** Entry 0 of the %_stat table is a blob containing (nCol+1) FTS3 - ** varints, where nCol is the number of columns in the FTS3 table. - ** The first varint is the number of documents currently stored in - ** the table. The following nCol varints contain the total amount of - ** data stored in all rows of each column of the table, from left - ** to right. - */ - int rc; - Fts3Table *p = (Fts3Table*)pCsr->base.pVtab; - sqlite3_stmt *pStmt; - sqlite3_int64 nDoc = 0; - sqlite3_int64 nByte = 0; - const char *pEnd; - const char *a; + if( rc==SQLITE_DONE ){ + int jj; + char *zBuf = 0; - rc = sqlite3Fts3SelectDoctotal(p, &pStmt); - if( rc!=SQLITE_OK ) return rc; - a = sqlite3_column_blob(pStmt, 0); - assert( a ); + p = fts3ReallocOrFree(p, nSpace + nToken*sizeof(Fts3PhraseToken) + nTemp); + if( !p ) goto no_mem; + memset(p, 0, (char *)&(((Fts3Phrase *)&p[1])->aToken[0])-(char *)p); + p->eType = FTSQUERY_PHRASE; + p->pPhrase = (Fts3Phrase *)&p[1]; + p->pPhrase->iColumn = pParse->iDefaultCol; + p->pPhrase->nToken = nToken; - pEnd = &a[sqlite3_column_bytes(pStmt, 0)]; - a += sqlite3Fts3GetVarint(a, &nDoc); - while( apPhrase->aToken[nToken]; + if( zTemp ){ + memcpy(zBuf, zTemp, nTemp); + sqlite3_free(zTemp); + }else{ + assert( nTemp==0 ); } - pCsr->nDoc = nDoc; - pCsr->nRowAvg = (int)(((nByte / nDoc) + p->nPgsz) / p->nPgsz); - assert( pCsr->nRowAvg>0 ); - rc = sqlite3_reset(pStmt); - if( rc!=SQLITE_OK ) return rc; + for(jj=0; jjpPhrase->nToken; jj++){ + p->pPhrase->aToken[jj].z = zBuf; + zBuf += p->pPhrase->aToken[jj].n; + } + rc = SQLITE_OK; } - *pnPage = pCsr->nRowAvg; - return SQLITE_OK; + *ppExpr = p; + return rc; +no_mem: + + if( pCursor ){ + pModule->xClose(pCursor); + } + sqlite3_free(zTemp); + sqlite3_free(p); + *ppExpr = 0; + return SQLITE_NOMEM; } -static int fts3EvalSelectDeferred( - Fts3Cursor *pCsr, - Fts3Expr *pRoot, - Fts3TokenAndCost *aTC, - int nTC +/* +** The output variable *ppExpr is populated with an allocated Fts3Expr +** structure, or set to 0 if the end of the input buffer is reached. +** +** Returns an SQLite error code. SQLITE_OK if everything works, SQLITE_NOMEM +** if a malloc failure occurs, or SQLITE_ERROR if a parse error is encountered. +** If SQLITE_ERROR is returned, pContext is populated with an error message. +*/ +static int getNextNode( + ParseContext *pParse, /* fts3 query parse context */ + const char *z, int n, /* Input string */ + Fts3Expr **ppExpr, /* OUT: expression */ + int *pnConsumed /* OUT: Number of bytes consumed */ ){ - int nDocSize = 0; - int nDocEst = 0; - int rc = SQLITE_OK; - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; + static const struct Fts3Keyword { + char *z; /* Keyword text */ + unsigned char n; /* Length of the keyword */ + unsigned char parenOnly; /* Only valid in paren mode */ + unsigned char eType; /* Keyword code */ + } aKeyword[] = { + { "OR" , 2, 0, FTSQUERY_OR }, + { "AND", 3, 1, FTSQUERY_AND }, + { "NOT", 3, 1, FTSQUERY_NOT }, + { "NEAR", 4, 0, FTSQUERY_NEAR } + }; int ii; + int iCol; + int iColLen; + int rc; + Fts3Expr *pRet = 0; - int nOvfl = 0; - int nTerm = 0; + const char *zInput = z; + int nInput = n; - for(ii=0; iiisNot = 0; - rc = fts3EvalAverageDocsize(pCsr, &nDocSize); + /* Skip over any whitespace before checking for a keyword, an open or + ** close bracket, or a quoted string. + */ + while( nInput>0 && fts3isspace(*zInput) ){ + nInput--; + zInput++; + } + if( nInput==0 ){ + return SQLITE_DONE; + } - for(ii=0; iinOvfl) - ){ - pTC = &aTC[jj]; - } + if( (pKey->parenOnly & ~sqlite3_fts3_enable_parentheses)!=0 ){ + continue; } - assert( pTC ); - /* At this point pTC points to the cheapest remaining token. */ - if( ii==0 ){ - if( pTC->nOvfl ){ - nDocEst = (pTC->nOvfl * pTab->nPgsz + pTab->nPgsz) / 10; - }else{ - Fts3PhraseToken *pToken = pTC->pToken; - int nList = 0; - char *pList = 0; - rc = fts3TermSelect(pTab, pToken, pTC->iCol, 1, &nList, &pList); - assert( rc==SQLITE_OK || pList==0 ); + if( nInput>=pKey->n && 0==memcmp(zInput, pKey->z, pKey->n) ){ + int nNear = SQLITE_FTS3_DEFAULT_NEAR_PARAM; + int nKey = pKey->n; + char cNext; - if( rc==SQLITE_OK ){ - nDocEst = fts3DoclistCountDocids(1, pList, nList); - fts3EvalPhraseMergeToken(pTab, pTC->pPhrase, pTC->iToken,pList,nList); + /* If this is a "NEAR" keyword, check for an explicit nearness. */ + if( pKey->eType==FTSQUERY_NEAR ){ + assert( nKey==4 ); + if( zInput[4]=='/' && zInput[5]>='0' && zInput[5]<='9' ){ + nNear = 0; + for(nKey=5; zInput[nKey]>='0' && zInput[nKey]<='9'; nKey++){ + nNear = nNear * 10 + (zInput[nKey] - '0'); + } } } - }else{ - if( pTC->nOvfl>=(nDocEst*nDocSize) ){ - Fts3PhraseToken *pToken = pTC->pToken; - rc = sqlite3Fts3DeferToken(pCsr, pToken, pTC->iCol); - fts3SegReaderCursorFree(pToken->pSegcsr); - pToken->pSegcsr = 0; + + /* At this point this is probably a keyword. But for that to be true, + ** the next byte must contain either whitespace, an open or close + ** parenthesis, a quote character, or EOF. + */ + cNext = zInput[nKey]; + if( fts3isspace(cNext) + || cNext=='"' || cNext=='(' || cNext==')' || cNext==0 + ){ + pRet = (Fts3Expr *)fts3MallocZero(sizeof(Fts3Expr)); + if( !pRet ){ + return SQLITE_NOMEM; + } + pRet->eType = pKey->eType; + pRet->nNear = nNear; + *ppExpr = pRet; + *pnConsumed = (int)((zInput - z) + nKey); + return SQLITE_OK; } - nDocEst = 1 + (nDocEst/4); + + /* Turns out that wasn't a keyword after all. This happens if the + ** user has supplied a token such as "ORacle". Continue. + */ } - pTC->pToken = 0; } - return rc; -} - -SQLITE_PRIVATE int sqlite3Fts3EvalStart(Fts3Cursor *pCsr, Fts3Expr *pExpr, int bOptOk){ - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - int rc = SQLITE_OK; - int nToken = 0; - int nOr = 0; + /* See if we are dealing with a quoted phrase. If this is the case, then + ** search for the closing quote and pass the whole string to getNextString() + ** for processing. This is easy to do, as fts3 has no syntax for escaping + ** a quote character embedded in a string. + */ + if( *zInput=='"' ){ + for(ii=1; iinNest++; + rc = fts3ExprParse(pParse, zInput+1, nInput-1, ppExpr, &nConsumed); + if( rc==SQLITE_OK && !*ppExpr ){ rc = SQLITE_DONE; } + *pnConsumed = (int)(zInput - z) + 1 + nConsumed; + return rc; + }else if( *zInput==')' ){ + pParse->nNest--; + *pnConsumed = (int)((zInput - z) + 1); + *ppExpr = 0; + return SQLITE_DONE; + } + } - /* Call fts3EvalPhraseStart() on all phrases in the expression. TODO: - ** This call will eventually also be responsible for determining which - ** tokens are 'deferred' until the document text is loaded into memory. - ** - ** Each token in each phrase is dealt with using one of the following - ** three strategies: - ** - ** 1. Entire doclist loaded into memory as part of the - ** fts3EvalStartReaders() call. - ** - ** 2. Doclist loaded into memory incrementally, as part of each - ** sqlite3Fts3EvalNext() call. + /* If control flows to this point, this must be a regular token, or + ** the end of the input. Read a regular token using the sqlite3_tokenizer + ** interface. Before doing so, figure out if there is an explicit + ** column specifier for the token. ** - ** 3. Token doclist is never loaded. Instead, documents are loaded into - ** memory and scanned for the token as part of the sqlite3Fts3EvalNext() - ** call. This is known as a "deferred" token. - */ - - /* If bOptOk is true, check if there are any tokens that should be deferred. + ** TODO: Strangely, it is not possible to associate a column specifier + ** with a quoted phrase, only with a single token. Not sure if this was + ** an implementation artifact or an intentional decision when fts3 was + ** first implemented. Whichever it was, this module duplicates the + ** limitation. */ - if( rc==SQLITE_OK && bOptOk && nToken>1 && pTab->bHasStat ){ - Fts3TokenAndCost *aTC; - Fts3Expr **apOr; - aTC = (Fts3TokenAndCost *)sqlite3_malloc( - sizeof(Fts3TokenAndCost) * nToken - + sizeof(Fts3Expr *) * nOr * 2 - ); - apOr = (Fts3Expr **)&aTC[nToken]; - - if( !aTC ){ - rc = SQLITE_NOMEM; - }else{ - int ii; - Fts3TokenAndCost *pTC = aTC; - Fts3Expr **ppOr = apOr; - - fts3EvalTokenCosts(pCsr, 0, pExpr, &pTC, &ppOr, &rc); - nToken = pTC-aTC; - nOr = ppOr-apOr; - - if( rc==SQLITE_OK ){ - rc = fts3EvalSelectDeferred(pCsr, 0, aTC, nToken); - for(ii=0; rc==SQLITE_OK && iiiDefaultCol; + iColLen = 0; + for(ii=0; iinCol; ii++){ + const char *zStr = pParse->azCol[ii]; + int nStr = (int)strlen(zStr); + if( nInput>nStr && zInput[nStr]==':' + && sqlite3_strnicmp(zStr, zInput, nStr)==0 + ){ + iCol = ii; + iColLen = (int)((zInput - z) + nStr + 1); + break; } } - - fts3EvalStartReaders(pCsr, pExpr, bOptOk, &rc); + rc = getNextToken(pParse, iCol, &z[iColLen], n-iColLen, ppExpr, pnConsumed); + *pnConsumed += iColLen; return rc; } -static void fts3EvalZeroPoslist(Fts3Phrase *pPhrase){ - if( pPhrase->doclist.bFreeList ){ - sqlite3_free(pPhrase->doclist.pList); +/* +** The argument is an Fts3Expr structure for a binary operator (any type +** except an FTSQUERY_PHRASE). Return an integer value representing the +** precedence of the operator. Lower values have a higher precedence (i.e. +** group more tightly). For example, in the C language, the == operator +** groups more tightly than ||, and would therefore have a higher precedence. +** +** When using the new fts3 query syntax (when SQLITE_ENABLE_FTS3_PARENTHESIS +** is defined), the order of the operators in precedence from highest to +** lowest is: +** +** NEAR +** NOT +** AND (including implicit ANDs) +** OR +** +** Note that when using the old query syntax, the OR operator has a higher +** precedence than the AND operator. +*/ +static int opPrecedence(Fts3Expr *p){ + assert( p->eType!=FTSQUERY_PHRASE ); + if( sqlite3_fts3_enable_parentheses ){ + return p->eType; + }else if( p->eType==FTSQUERY_NEAR ){ + return 1; + }else if( p->eType==FTSQUERY_OR ){ + return 2; } - pPhrase->doclist.pList = 0; - pPhrase->doclist.nList = 0; - pPhrase->doclist.bFreeList = 0; + assert( p->eType==FTSQUERY_AND ); + return 3; } -static int fts3EvalNearTrim2( - int nNear, - char *aTmp, /* Temporary space to use */ - char **paPoslist, /* IN/OUT: Position list */ - int *pnToken, /* IN/OUT: Tokens in phrase of *paPoslist */ - Fts3Phrase *pPhrase /* The phrase object to trim the doclist of */ +/* +** Argument ppHead contains a pointer to the current head of a query +** expression tree being parsed. pPrev is the expression node most recently +** inserted into the tree. This function adds pNew, which is always a binary +** operator node, into the expression tree based on the relative precedence +** of pNew and the existing nodes of the tree. This may result in the head +** of the tree changing, in which case *ppHead is set to the new root node. +*/ +static void insertBinaryOperator( + Fts3Expr **ppHead, /* Pointer to the root node of a tree */ + Fts3Expr *pPrev, /* Node most recently inserted into the tree */ + Fts3Expr *pNew /* New binary node to insert into expression tree */ ){ - int nParam1 = nNear + pPhrase->nToken; - int nParam2 = nNear + *pnToken; - int nNew; - char *p2; - char *pOut; - int res; - - assert( pPhrase->doclist.pList ); - - p2 = pOut = pPhrase->doclist.pList; - res = fts3PoslistNearMerge( - &pOut, aTmp, nParam1, nParam2, paPoslist, &p2 - ); - if( res ){ - nNew = (pOut - pPhrase->doclist.pList) - 1; - assert( pPhrase->doclist.pList[nNew]=='\0' ); - assert( nNew<=pPhrase->doclist.nList && nNew>0 ); - memset(&pPhrase->doclist.pList[nNew], 0, pPhrase->doclist.nList - nNew); - pPhrase->doclist.nList = nNew; - *paPoslist = pPhrase->doclist.pList; - *pnToken = pPhrase->nToken; + Fts3Expr *pSplit = pPrev; + while( pSplit->pParent && opPrecedence(pSplit->pParent)<=opPrecedence(pNew) ){ + pSplit = pSplit->pParent; } - return res; -} - -static int fts3EvalNearTest(Fts3Expr *pExpr, int *pRc){ - int res = 1; - - /* The following block runs if pExpr is the root of a NEAR query. - ** For example, the query: - ** - ** "w" NEAR "x" NEAR "y" NEAR "z" - ** - ** which is represented in tree form as: - ** - ** | - ** +--NEAR--+ <-- root of NEAR query - ** | | - ** +--NEAR--+ "z" - ** | | - ** +--NEAR--+ "y" - ** | | - ** "w" "x" - ** - ** The right-hand child of a NEAR node is always a phrase. The - ** left-hand child may be either a phrase or a NEAR node. There are - ** no exceptions to this. - */ - if( *pRc==SQLITE_OK - && pExpr->eType==FTSQUERY_NEAR - && pExpr->bEof==0 - && (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR) - ){ - Fts3Expr *p; - int nTmp = 0; /* Bytes of temp space */ - char *aTmp; /* Temp space for PoslistNearMerge() */ - - /* Allocate temporary working space. */ - for(p=pExpr; p->pLeft; p=p->pLeft){ - nTmp += p->pRight->pPhrase->doclist.nList; - } - nTmp += p->pPhrase->doclist.nList; - aTmp = sqlite3_malloc(nTmp*2); - if( !aTmp ){ - *pRc = SQLITE_NOMEM; - res = 0; - }else{ - char *aPoslist = p->pPhrase->doclist.pList; - int nToken = p->pPhrase->nToken; - - for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ - Fts3Phrase *pPhrase = p->pRight->pPhrase; - int nNear = p->nNear; - res = fts3EvalNearTrim2(nNear, aTmp, &aPoslist, &nToken, pPhrase); - } - - aPoslist = pExpr->pRight->pPhrase->doclist.pList; - nToken = pExpr->pRight->pPhrase->nToken; - for(p=pExpr->pLeft; p && res; p=p->pLeft){ - int nNear = p->pParent->nNear; - Fts3Phrase *pPhrase = ( - p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase - ); - res = fts3EvalNearTrim2(nNear, aTmp, &aPoslist, &nToken, pPhrase); - } - } - - sqlite3_free(aTmp); + if( pSplit->pParent ){ + assert( pSplit->pParent->pRight==pSplit ); + pSplit->pParent->pRight = pNew; + pNew->pParent = pSplit->pParent; + }else{ + *ppHead = pNew; } - - return res; + pNew->pLeft = pSplit; + pSplit->pParent = pNew; } /* -** This macro is used by the fts3EvalNext() function. The two arguments are -** 64-bit docid values. If the current query is "ORDER BY docid ASC", then -** the macro returns (i1 - i2). Or if it is "ORDER BY docid DESC", then -** it returns (i2 - i1). This allows the same code to be used for merging -** doclists in ascending or descending order. +** Parse the fts3 query expression found in buffer z, length n. This function +** returns either when the end of the buffer is reached or an unmatched +** closing bracket - ')' - is encountered. +** +** If successful, SQLITE_OK is returned, *ppExpr is set to point to the +** parsed form of the expression and *pnConsumed is set to the number of +** bytes read from buffer z. Otherwise, *ppExpr is set to 0 and SQLITE_NOMEM +** (out of memory error) or SQLITE_ERROR (parse error) is returned. */ -#define DOCID_CMP(i1, i2) ((pCsr->bDesc?-1:1) * (i1-i2)) - -static void fts3EvalNext( - Fts3Cursor *pCsr, - Fts3Expr *pExpr, - int *pRc +static int fts3ExprParse( + ParseContext *pParse, /* fts3 query parse context */ + const char *z, int n, /* Text of MATCH query */ + Fts3Expr **ppExpr, /* OUT: Parsed query structure */ + int *pnConsumed /* OUT: Number of bytes consumed */ ){ - if( *pRc==SQLITE_OK ){ - assert( pExpr->bEof==0 ); - pExpr->bStart = 1; - - switch( pExpr->eType ){ - case FTSQUERY_NEAR: - case FTSQUERY_AND: { - Fts3Expr *pLeft = pExpr->pLeft; - Fts3Expr *pRight = pExpr->pRight; - assert( !pLeft->bDeferred || !pRight->bDeferred ); - if( pLeft->bDeferred ){ - fts3EvalNext(pCsr, pRight, pRc); - pExpr->iDocid = pRight->iDocid; - pExpr->bEof = pRight->bEof; - }else if( pRight->bDeferred ){ - fts3EvalNext(pCsr, pLeft, pRc); - pExpr->iDocid = pLeft->iDocid; - pExpr->bEof = pLeft->bEof; - }else{ - fts3EvalNext(pCsr, pLeft, pRc); - fts3EvalNext(pCsr, pRight, pRc); - - while( !pLeft->bEof && !pRight->bEof && *pRc==SQLITE_OK ){ - sqlite3_int64 iDiff = DOCID_CMP(pLeft->iDocid, pRight->iDocid); - if( iDiff==0 ) break; - if( iDiff<0 ){ - fts3EvalNext(pCsr, pLeft, pRc); - }else{ - fts3EvalNext(pCsr, pRight, pRc); - } - } - - pExpr->iDocid = pLeft->iDocid; - pExpr->bEof = (pLeft->bEof || pRight->bEof); - } - break; - } - - case FTSQUERY_OR: { - Fts3Expr *pLeft = pExpr->pLeft; - Fts3Expr *pRight = pExpr->pRight; - sqlite3_int64 iCmp = DOCID_CMP(pLeft->iDocid, pRight->iDocid); + Fts3Expr *pRet = 0; + Fts3Expr *pPrev = 0; + Fts3Expr *pNotBranch = 0; /* Only used in legacy parse mode */ + int nIn = n; + const char *zIn = z; + int rc = SQLITE_OK; + int isRequirePhrase = 1; - assert( pLeft->bStart || pLeft->iDocid==pRight->iDocid ); - assert( pRight->bStart || pLeft->iDocid==pRight->iDocid ); + while( rc==SQLITE_OK ){ + Fts3Expr *p = 0; + int nByte = 0; - if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){ - fts3EvalNext(pCsr, pLeft, pRc); - }else if( pLeft->bEof || (pRight->bEof==0 && iCmp>0) ){ - fts3EvalNext(pCsr, pRight, pRc); - }else{ - fts3EvalNext(pCsr, pLeft, pRc); - fts3EvalNext(pCsr, pRight, pRc); - } + rc = getNextNode(pParse, zIn, nIn, &p, &nByte); + assert( nByte>0 || (rc!=SQLITE_OK && p==0) ); + if( rc==SQLITE_OK ){ + if( p ){ + int isPhrase; - pExpr->bEof = (pLeft->bEof && pRight->bEof); - iCmp = DOCID_CMP(pLeft->iDocid, pRight->iDocid); - if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){ - pExpr->iDocid = pLeft->iDocid; + if( !sqlite3_fts3_enable_parentheses + && p->eType==FTSQUERY_PHRASE && pParse->isNot + ){ + /* Create an implicit NOT operator. */ + Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr)); + if( !pNot ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_NOMEM; + goto exprparse_out; + } + pNot->eType = FTSQUERY_NOT; + pNot->pRight = p; + p->pParent = pNot; + if( pNotBranch ){ + pNot->pLeft = pNotBranch; + pNotBranch->pParent = pNot; + } + pNotBranch = pNot; + p = pPrev; }else{ - pExpr->iDocid = pRight->iDocid; - } - - break; - } - - case FTSQUERY_NOT: { - Fts3Expr *pLeft = pExpr->pLeft; - Fts3Expr *pRight = pExpr->pRight; - - if( pRight->bStart==0 ){ - fts3EvalNext(pCsr, pRight, pRc); - assert( *pRc!=SQLITE_OK || pRight->bStart ); - } + int eType = p->eType; + isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft); - fts3EvalNext(pCsr, pLeft, pRc); - if( pLeft->bEof==0 ){ - while( !*pRc - && !pRight->bEof - && DOCID_CMP(pLeft->iDocid, pRight->iDocid)>0 - ){ - fts3EvalNext(pCsr, pRight, pRc); + /* The isRequirePhrase variable is set to true if a phrase or + ** an expression contained in parenthesis is required. If a + ** binary operator (AND, OR, NOT or NEAR) is encounted when + ** isRequirePhrase is set, this is a syntax error. + */ + if( !isPhrase && isRequirePhrase ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_ERROR; + goto exprparse_out; } - } - pExpr->iDocid = pLeft->iDocid; - pExpr->bEof = pLeft->bEof; - break; - } - - default: { - Fts3Phrase *pPhrase = pExpr->pPhrase; - fts3EvalZeroPoslist(pPhrase); - *pRc = fts3EvalPhraseNext(pCsr, pPhrase, &pExpr->bEof); - pExpr->iDocid = pPhrase->doclist.iDocid; - break; - } - } - } -} - -static int fts3EvalDeferredTest(Fts3Cursor *pCsr, Fts3Expr *pExpr, int *pRc){ - int bHit = 1; - if( *pRc==SQLITE_OK ){ - switch( pExpr->eType ){ - case FTSQUERY_NEAR: - case FTSQUERY_AND: - bHit = ( - fts3EvalDeferredTest(pCsr, pExpr->pLeft, pRc) - && fts3EvalDeferredTest(pCsr, pExpr->pRight, pRc) - && fts3EvalNearTest(pExpr, pRc) - ); - /* If the NEAR expression does not match any rows, zero the doclist for - ** all phrases involved in the NEAR. This is because the snippet(), - ** offsets() and matchinfo() functions are not supposed to recognize - ** any instances of phrases that are part of unmatched NEAR queries. - ** For example if this expression: - ** - ** ... MATCH 'a OR (b NEAR c)' - ** - ** is matched against a row containing: - ** - ** 'a b d e' - ** - ** then any snippet() should ony highlight the "a" term, not the "b" - ** (as "b" is part of a non-matching NEAR clause). - */ - if( bHit==0 - && pExpr->eType==FTSQUERY_NEAR - && (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR) - ){ - Fts3Expr *p; - for(p=pExpr; p->pPhrase==0; p=p->pLeft){ - if( p->pRight->iDocid==pCsr->iPrevId ){ - fts3EvalZeroPoslist(p->pRight->pPhrase); + if( isPhrase && !isRequirePhrase ){ + /* Insert an implicit AND operator. */ + Fts3Expr *pAnd; + assert( pRet && pPrev ); + pAnd = fts3MallocZero(sizeof(Fts3Expr)); + if( !pAnd ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_NOMEM; + goto exprparse_out; } + pAnd->eType = FTSQUERY_AND; + insertBinaryOperator(&pRet, pPrev, pAnd); + pPrev = pAnd; } - if( p->iDocid==pCsr->iPrevId ){ - fts3EvalZeroPoslist(p->pPhrase); - } - } - break; - - case FTSQUERY_OR: { - int bHit1 = fts3EvalDeferredTest(pCsr, pExpr->pLeft, pRc); - int bHit2 = fts3EvalDeferredTest(pCsr, pExpr->pRight, pRc); - bHit = bHit1 || bHit2; - break; - } - - case FTSQUERY_NOT: - bHit = ( - fts3EvalDeferredTest(pCsr, pExpr->pLeft, pRc) - && !fts3EvalDeferredTest(pCsr, pExpr->pRight, pRc) - ); - break; + /* This test catches attempts to make either operand of a NEAR + ** operator something other than a phrase. For example, either of + ** the following: + ** + ** (bracketed expression) NEAR phrase + ** phrase NEAR (bracketed expression) + ** + ** Return an error in either case. + */ + if( pPrev && ( + (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE) + || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR) + )){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_ERROR; + goto exprparse_out; + } - default: { - if( pCsr->pDeferred - && (pExpr->iDocid==pCsr->iPrevId || pExpr->bDeferred) - ){ - Fts3Phrase *pPhrase = pExpr->pPhrase; - assert( pExpr->bDeferred || pPhrase->doclist.bFreeList==0 ); - if( pExpr->bDeferred ){ - fts3EvalZeroPoslist(pPhrase); + if( isPhrase ){ + if( pRet ){ + assert( pPrev && pPrev->pLeft && pPrev->pRight==0 ); + pPrev->pRight = p; + p->pParent = pPrev; + }else{ + pRet = p; + } + }else{ + insertBinaryOperator(&pRet, pPrev, p); } - *pRc = fts3EvalDeferredPhrase(pCsr, pPhrase); - bHit = (pPhrase->doclist.pList!=0); - pExpr->iDocid = pCsr->iPrevId; - }else{ - bHit = (pExpr->bEof==0 && pExpr->iDocid==pCsr->iPrevId); + isRequirePhrase = !isPhrase; } - break; + pPrev = p; } + assert( nByte>0 ); } + assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) ); + nIn -= nByte; + zIn += nByte; } - return bHit; -} -/* -** Return 1 if both of the following are true: -** -** 1. *pRc is SQLITE_OK when this function returns, and -** -** 2. After scanning the current FTS table row for the deferred tokens, -** it is determined that the row does not match the query. -** -** Or, if no error occurs and it seems the current row does match the FTS -** query, return 0. -*/ -static int fts3EvalLoadDeferred(Fts3Cursor *pCsr, int *pRc){ - int rc = *pRc; - int bMiss = 0; - if( rc==SQLITE_OK ){ - if( pCsr->pDeferred ){ - rc = fts3CursorSeek(0, pCsr); - if( rc==SQLITE_OK ){ - rc = sqlite3Fts3CacheDeferredDoclists(pCsr); + if( rc==SQLITE_DONE && pRet && isRequirePhrase ){ + rc = SQLITE_ERROR; + } + + if( rc==SQLITE_DONE ){ + rc = SQLITE_OK; + if( !sqlite3_fts3_enable_parentheses && pNotBranch ){ + if( !pRet ){ + rc = SQLITE_ERROR; + }else{ + Fts3Expr *pIter = pNotBranch; + while( pIter->pLeft ){ + pIter = pIter->pLeft; + } + pIter->pLeft = pRet; + pRet->pParent = pIter; + pRet = pNotBranch; } } - bMiss = (0==fts3EvalDeferredTest(pCsr, pCsr->pExpr, &rc)); - sqlite3Fts3FreeDeferredDoclists(pCsr); - *pRc = rc; } - return (rc==SQLITE_OK && bMiss); + *pnConsumed = n - nIn; + +exprparse_out: + if( rc!=SQLITE_OK ){ + sqlite3Fts3ExprFree(pRet); + sqlite3Fts3ExprFree(pNotBranch); + pRet = 0; + } + *ppExpr = pRet; + return rc; } /* -** Advance to the next document that matches the FTS expression in -** Fts3Cursor.pExpr. +** Return SQLITE_ERROR if the maximum depth of the expression tree passed +** as the only argument is more than nMaxDepth. */ -SQLITE_PRIVATE int sqlite3Fts3EvalNext(Fts3Cursor *pCsr){ - int rc = SQLITE_OK; /* Return Code */ - Fts3Expr *pExpr = pCsr->pExpr; - assert( pCsr->isEof==0 ); - if( pExpr==0 ){ - pCsr->isEof = 1; - }else{ - do { - if( pCsr->isRequireSeek==0 ){ - sqlite3_reset(pCsr->pStmt); +static int fts3ExprCheckDepth(Fts3Expr *p, int nMaxDepth){ + int rc = SQLITE_OK; + if( p ){ + if( nMaxDepth<0 ){ + rc = SQLITE_TOOBIG; + }else{ + rc = fts3ExprCheckDepth(p->pLeft, nMaxDepth-1); + if( rc==SQLITE_OK ){ + rc = fts3ExprCheckDepth(p->pRight, nMaxDepth-1); } - assert( sqlite3_data_count(pCsr->pStmt)==0 ); - fts3EvalNext(pCsr, pExpr, &rc); - pCsr->isEof = pExpr->bEof; - pCsr->isRequireSeek = 1; - pCsr->isMatchinfoNeeded = 1; - pCsr->iPrevId = pExpr->iDocid; - }while( pCsr->isEof==0 && fts3EvalLoadDeferred(pCsr, &rc) ); + } } return rc; } /* -** Restart interation for expression pExpr so that the next call to -** sqlite3Fts3EvalNext() visits the first row. Do not allow incremental -** loading or merging of phrase doclists for this iteration. +** This function attempts to transform the expression tree at (*pp) to +** an equivalent but more balanced form. The tree is modified in place. +** If successful, SQLITE_OK is returned and (*pp) set to point to the +** new root expression node. ** -** If *pRc is other than SQLITE_OK when this function is called, it is -** a no-op. If an error occurs within this function, *pRc is set to an -** SQLite error code before returning. +** nMaxDepth is the maximum allowable depth of the balanced sub-tree. +** +** Otherwise, if an error occurs, an SQLite error code is returned and +** expression (*pp) freed. */ -static void fts3EvalRestart( - Fts3Cursor *pCsr, - Fts3Expr *pExpr, - int *pRc -){ - if( pExpr && *pRc==SQLITE_OK ){ - Fts3Phrase *pPhrase = pExpr->pPhrase; +static int fts3ExprBalance(Fts3Expr **pp, int nMaxDepth){ + int rc = SQLITE_OK; /* Return code */ + Fts3Expr *pRoot = *pp; /* Initial root node */ + Fts3Expr *pFree = 0; /* List of free nodes. Linked by pParent. */ + int eType = pRoot->eType; /* Type of node in this tree */ - if( pPhrase ){ - fts3EvalZeroPoslist(pPhrase); - if( pPhrase->bIncr ){ - assert( pPhrase->nToken==1 ); - assert( pPhrase->aToken[0].pSegcsr ); - sqlite3Fts3MsrIncrRestart(pPhrase->aToken[0].pSegcsr); - *pRc = fts3EvalPhraseStart(pCsr, 0, pPhrase); - } + if( nMaxDepth==0 ){ + rc = SQLITE_ERROR; + } - pPhrase->doclist.pNextDocid = 0; - pPhrase->doclist.iDocid = 0; + if( rc==SQLITE_OK && (eType==FTSQUERY_AND || eType==FTSQUERY_OR) ){ + Fts3Expr **apLeaf; + apLeaf = (Fts3Expr **)sqlite3_malloc(sizeof(Fts3Expr *) * nMaxDepth); + if( 0==apLeaf ){ + rc = SQLITE_NOMEM; + }else{ + memset(apLeaf, 0, sizeof(Fts3Expr *) * nMaxDepth); } - pExpr->iDocid = 0; - pExpr->bEof = 0; - pExpr->bStart = 0; - - fts3EvalRestart(pCsr, pExpr->pLeft, pRc); - fts3EvalRestart(pCsr, pExpr->pRight, pRc); - } -} + if( rc==SQLITE_OK ){ + int i; + Fts3Expr *p; -/* -** After allocating the Fts3Expr.aMI[] array for each phrase in the -** expression rooted at pExpr, the cursor iterates through all rows matched -** by pExpr, calling this function for each row. This function increments -** the values in Fts3Expr.aMI[] according to the position-list currently -** found in Fts3Expr.pPhrase->doclist.pList for each of the phrase -** expression nodes. -*/ -static void fts3EvalUpdateCounts(Fts3Expr *pExpr){ - if( pExpr ){ - Fts3Phrase *pPhrase = pExpr->pPhrase; - if( pPhrase && pPhrase->doclist.pList ){ - int iCol = 0; - char *p = pPhrase->doclist.pList; + /* Set $p to point to the left-most leaf in the tree of eType nodes. */ + for(p=pRoot; p->eType==eType; p=p->pLeft){ + assert( p->pParent==0 || p->pParent->pLeft==p ); + assert( p->pLeft && p->pRight ); + } - assert( *p ); + /* This loop runs once for each leaf in the tree of eType nodes. */ while( 1 ){ - u8 c = 0; - int iCnt = 0; - while( 0xFE & (*p | c) ){ - if( (c&0x80)==0 ) iCnt++; - c = *p++ & 0x80; + int iLvl; + Fts3Expr *pParent = p->pParent; /* Current parent of p */ + + assert( pParent==0 || pParent->pLeft==p ); + p->pParent = 0; + if( pParent ){ + pParent->pLeft = 0; + }else{ + pRoot = 0; } + rc = fts3ExprBalance(&p, nMaxDepth-1); + if( rc!=SQLITE_OK ) break; - /* aMI[iCol*3 + 1] = Number of occurrences - ** aMI[iCol*3 + 2] = Number of rows containing at least one instance - */ - pExpr->aMI[iCol*3 + 1] += iCnt; - pExpr->aMI[iCol*3 + 2] += (iCnt>0); - if( *p==0x00 ) break; - p++; - p += sqlite3Fts3GetVarint32(p, &iCol); + for(iLvl=0; p && iLvlpLeft = apLeaf[iLvl]; + pFree->pRight = p; + pFree->pLeft->pParent = pFree; + pFree->pRight->pParent = pFree; + + p = pFree; + pFree = pFree->pParent; + p->pParent = 0; + apLeaf[iLvl] = 0; + } + } + if( p ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_TOOBIG; + break; + } + + /* If that was the last leaf node, break out of the loop */ + if( pParent==0 ) break; + + /* Set $p to point to the next leaf in the tree of eType nodes */ + for(p=pParent->pRight; p->eType==eType; p=p->pLeft); + + /* Remove pParent from the original tree. */ + assert( pParent->pParent==0 || pParent->pParent->pLeft==pParent ); + pParent->pRight->pParent = pParent->pParent; + if( pParent->pParent ){ + pParent->pParent->pLeft = pParent->pRight; + }else{ + assert( pParent==pRoot ); + pRoot = pParent->pRight; + } + + /* Link pParent into the free node list. It will be used as an + ** internal node of the new tree. */ + pParent->pParent = pFree; + pFree = pParent; + } + + if( rc==SQLITE_OK ){ + p = 0; + for(i=0; ipParent = 0; + }else{ + assert( pFree!=0 ); + pFree->pRight = p; + pFree->pLeft = apLeaf[i]; + pFree->pLeft->pParent = pFree; + pFree->pRight->pParent = pFree; + + p = pFree; + pFree = pFree->pParent; + p->pParent = 0; + } + } + } + pRoot = p; + }else{ + /* An error occurred. Delete the contents of the apLeaf[] array + ** and pFree list. Everything else is cleaned up by the call to + ** sqlite3Fts3ExprFree(pRoot) below. */ + Fts3Expr *pDel; + for(i=0; ipParent; + sqlite3_free(pDel); + } } + + assert( pFree==0 ); + sqlite3_free( apLeaf ); } + } - fts3EvalUpdateCounts(pExpr->pLeft); - fts3EvalUpdateCounts(pExpr->pRight); + if( rc!=SQLITE_OK ){ + sqlite3Fts3ExprFree(pRoot); + pRoot = 0; } + *pp = pRoot; + return rc; } /* -** Expression pExpr must be of type FTSQUERY_PHRASE. +** This function is similar to sqlite3Fts3ExprParse(), with the following +** differences: ** -** If it is not already allocated and populated, this function allocates and -** populates the Fts3Expr.aMI[] array for expression pExpr. If pExpr is part -** of a NEAR expression, then it also allocates and populates the same array -** for all other phrases that are part of the NEAR expression. -** -** SQLITE_OK is returned if the aMI[] array is successfully allocated and -** populated. Otherwise, if an error occurs, an SQLite error code is returned. +** 1. It does not do expression rebalancing. +** 2. It does not check that the expression does not exceed the +** maximum allowable depth. +** 3. Even if it fails, *ppExpr may still be set to point to an +** expression tree. It should be deleted using sqlite3Fts3ExprFree() +** in this case. */ -static int fts3EvalGatherStats( - Fts3Cursor *pCsr, /* Cursor object */ - Fts3Expr *pExpr /* FTSQUERY_PHRASE expression */ +static int fts3ExprParseUnbalanced( + sqlite3_tokenizer *pTokenizer, /* Tokenizer module */ + int iLangid, /* Language id for tokenizer */ + char **azCol, /* Array of column names for fts3 table */ + int bFts4, /* True to allow FTS4-only syntax */ + int nCol, /* Number of entries in azCol[] */ + int iDefaultCol, /* Default column to query */ + const char *z, int n, /* Text of MATCH query */ + Fts3Expr **ppExpr /* OUT: Parsed query structure */ ){ - int rc = SQLITE_OK; /* Return code */ + int nParsed; + int rc; + ParseContext sParse; - assert( pExpr->eType==FTSQUERY_PHRASE ); - if( pExpr->aMI==0 ){ - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - Fts3Expr *pRoot; /* Root of NEAR expression */ - Fts3Expr *p; /* Iterator used for several purposes */ + memset(&sParse, 0, sizeof(ParseContext)); + sParse.pTokenizer = pTokenizer; + sParse.iLangid = iLangid; + sParse.azCol = (const char **)azCol; + sParse.nCol = nCol; + sParse.iDefaultCol = iDefaultCol; + sParse.bFts4 = bFts4; + if( z==0 ){ + *ppExpr = 0; + return SQLITE_OK; + } + if( n<0 ){ + n = (int)strlen(z); + } + rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed); + assert( rc==SQLITE_OK || *ppExpr==0 ); - sqlite3_int64 iPrevId = pCsr->iPrevId; - sqlite3_int64 iDocid; - u8 bEof; + /* Check for mismatched parenthesis */ + if( rc==SQLITE_OK && sParse.nNest ){ + rc = SQLITE_ERROR; + } + + return rc; +} - /* Find the root of the NEAR expression */ - pRoot = pExpr; - while( pRoot->pParent && pRoot->pParent->eType==FTSQUERY_NEAR ){ - pRoot = pRoot->pParent; +/* +** Parameters z and n contain a pointer to and length of a buffer containing +** an fts3 query expression, respectively. This function attempts to parse the +** query expression and create a tree of Fts3Expr structures representing the +** parsed expression. If successful, *ppExpr is set to point to the head +** of the parsed expression tree and SQLITE_OK is returned. If an error +** occurs, either SQLITE_NOMEM (out-of-memory error) or SQLITE_ERROR (parse +** error) is returned and *ppExpr is set to 0. +** +** If parameter n is a negative number, then z is assumed to point to a +** nul-terminated string and the length is determined using strlen(). +** +** The first parameter, pTokenizer, is passed the fts3 tokenizer module to +** use to normalize query tokens while parsing the expression. The azCol[] +** array, which is assumed to contain nCol entries, should contain the names +** of each column in the target fts3 table, in order from left to right. +** Column names must be nul-terminated strings. +** +** The iDefaultCol parameter should be passed the index of the table column +** that appears on the left-hand-side of the MATCH operator (the default +** column to match against for tokens for which a column name is not explicitly +** specified as part of the query string), or -1 if tokens may by default +** match any table column. +*/ +SQLITE_PRIVATE int sqlite3Fts3ExprParse( + sqlite3_tokenizer *pTokenizer, /* Tokenizer module */ + int iLangid, /* Language id for tokenizer */ + char **azCol, /* Array of column names for fts3 table */ + int bFts4, /* True to allow FTS4-only syntax */ + int nCol, /* Number of entries in azCol[] */ + int iDefaultCol, /* Default column to query */ + const char *z, int n, /* Text of MATCH query */ + Fts3Expr **ppExpr, /* OUT: Parsed query structure */ + char **pzErr /* OUT: Error message (sqlite3_malloc) */ +){ + int rc = fts3ExprParseUnbalanced( + pTokenizer, iLangid, azCol, bFts4, nCol, iDefaultCol, z, n, ppExpr + ); + + /* Rebalance the expression. And check that its depth does not exceed + ** SQLITE_FTS3_MAX_EXPR_DEPTH. */ + if( rc==SQLITE_OK && *ppExpr ){ + rc = fts3ExprBalance(ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH); + if( rc==SQLITE_OK ){ + rc = fts3ExprCheckDepth(*ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH); } - iDocid = pRoot->iDocid; - bEof = pRoot->bEof; - assert( pRoot->bStart ); + } - /* Allocate space for the aMSI[] array of each FTSQUERY_PHRASE node */ - for(p=pRoot; p; p=p->pLeft){ - Fts3Expr *pE = (p->eType==FTSQUERY_PHRASE?p:p->pRight); - assert( pE->aMI==0 ); - pE->aMI = (u32 *)sqlite3_malloc(pTab->nColumn * 3 * sizeof(u32)); - if( !pE->aMI ) return SQLITE_NOMEM; - memset(pE->aMI, 0, pTab->nColumn * 3 * sizeof(u32)); + if( rc!=SQLITE_OK ){ + sqlite3Fts3ExprFree(*ppExpr); + *ppExpr = 0; + if( rc==SQLITE_TOOBIG ){ + *pzErr = sqlite3_mprintf( + "FTS expression tree is too large (maximum depth %d)", + SQLITE_FTS3_MAX_EXPR_DEPTH + ); + rc = SQLITE_ERROR; + }else if( rc==SQLITE_ERROR ){ + *pzErr = sqlite3_mprintf("malformed MATCH expression: [%s]", z); } + } - fts3EvalRestart(pCsr, pRoot, &rc); - - while( pCsr->isEof==0 && rc==SQLITE_OK ){ - - do { - /* Ensure the %_content statement is reset. */ - if( pCsr->isRequireSeek==0 ) sqlite3_reset(pCsr->pStmt); - assert( sqlite3_data_count(pCsr->pStmt)==0 ); + return rc; +} - /* Advance to the next document */ - fts3EvalNext(pCsr, pRoot, &rc); - pCsr->isEof = pRoot->bEof; - pCsr->isRequireSeek = 1; - pCsr->isMatchinfoNeeded = 1; - pCsr->iPrevId = pRoot->iDocid; - }while( pCsr->isEof==0 - && pRoot->eType==FTSQUERY_NEAR - && fts3EvalLoadDeferred(pCsr, &rc) - ); +/* +** Free a single node of an expression tree. +*/ +static void fts3FreeExprNode(Fts3Expr *p){ + assert( p->eType==FTSQUERY_PHRASE || p->pPhrase==0 ); + sqlite3Fts3EvalPhraseCleanup(p->pPhrase); + sqlite3_free(p->aMI); + sqlite3_free(p); +} - if( rc==SQLITE_OK && pCsr->isEof==0 ){ - fts3EvalUpdateCounts(pRoot); +/* +** Free a parsed fts3 query expression allocated by sqlite3Fts3ExprParse(). +** +** This function would be simpler if it recursively called itself. But +** that would mean passing a sufficiently large expression to ExprParse() +** could cause a stack overflow. +*/ +SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *pDel){ + Fts3Expr *p; + assert( pDel==0 || pDel->pParent==0 ); + for(p=pDel; p && (p->pLeft||p->pRight); p=(p->pLeft ? p->pLeft : p->pRight)){ + assert( p->pParent==0 || p==p->pParent->pRight || p==p->pParent->pLeft ); + } + while( p ){ + Fts3Expr *pParent = p->pParent; + fts3FreeExprNode(p); + if( pParent && p==pParent->pLeft && pParent->pRight ){ + p = pParent->pRight; + while( p && (p->pLeft || p->pRight) ){ + assert( p==p->pParent->pRight || p==p->pParent->pLeft ); + p = (p->pLeft ? p->pLeft : p->pRight); } - } - - pCsr->isEof = 0; - pCsr->iPrevId = iPrevId; - - if( bEof ){ - pRoot->bEof = bEof; }else{ - /* Caution: pRoot may iterate through docids in ascending or descending - ** order. For this reason, even though it seems more defensive, the - ** do loop can not be written: - ** - ** do {...} while( pRoot->iDocidbEof==0 ); - }while( pRoot->iDocid!=iDocid && rc==SQLITE_OK ); - fts3EvalLoadDeferred(pCsr, &rc); + p = pParent; } } - return rc; } +/**************************************************************************** +***************************************************************************** +** Everything after this point is just test code. +*/ + +#ifdef SQLITE_TEST + +/* #include */ + /* -** This function is used by the matchinfo() module to query a phrase -** expression node for the following information: -** -** 1. The total number of occurrences of the phrase in each column of -** the FTS table (considering all rows), and -** -** 2. For each column, the number of rows in the table for which the -** column contains at least one instance of the phrase. -** -** If no error occurs, SQLITE_OK is returned and the values for each column -** written into the array aiOut as follows: -** -** aiOut[iCol*3 + 1] = Number of occurrences -** aiOut[iCol*3 + 2] = Number of rows containing at least one instance -** -** Caveats: -** -** * If a phrase consists entirely of deferred tokens, then all output -** values are set to the number of documents in the table. In other -** words we assume that very common tokens occur exactly once in each -** column of each row of the table. -** -** * If a phrase contains some deferred tokens (and some non-deferred -** tokens), count the potential occurrence identified by considering -** the non-deferred tokens instead of actual phrase occurrences. -** -** * If the phrase is part of a NEAR expression, then only phrase instances -** that meet the NEAR constraint are included in the counts. +** Function to query the hash-table of tokenizers (see README.tokenizers). */ -SQLITE_PRIVATE int sqlite3Fts3EvalPhraseStats( - Fts3Cursor *pCsr, /* FTS cursor handle */ - Fts3Expr *pExpr, /* Phrase expression */ - u32 *aiOut /* Array to write results into (see above) */ +static int queryTestTokenizer( + sqlite3 *db, + const char *zName, + const sqlite3_tokenizer_module **pp ){ - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - int rc = SQLITE_OK; - int iCol; + int rc; + sqlite3_stmt *pStmt; + const char zSql[] = "SELECT fts3_tokenizer(?)"; - if( pExpr->bDeferred && pExpr->pParent->eType!=FTSQUERY_NEAR ){ - assert( pCsr->nDoc>0 ); - for(iCol=0; iColnColumn; iCol++){ - aiOut[iCol*3 + 1] = (u32)pCsr->nDoc; - aiOut[iCol*3 + 2] = (u32)pCsr->nDoc; + *pp = 0; + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + if( rc!=SQLITE_OK ){ + return rc; + } + + sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){ + memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp)); } - }else{ - rc = fts3EvalGatherStats(pCsr, pExpr); - if( rc==SQLITE_OK ){ - assert( pExpr->aMI ); - for(iCol=0; iColnColumn; iCol++){ - aiOut[iCol*3 + 1] = pExpr->aMI[iCol*3 + 1]; - aiOut[iCol*3 + 2] = pExpr->aMI[iCol*3 + 2]; + } + + return sqlite3_finalize(pStmt); +} + +/* +** Return a pointer to a buffer containing a text representation of the +** expression passed as the first argument. The buffer is obtained from +** sqlite3_malloc(). It is the responsibility of the caller to use +** sqlite3_free() to release the memory. If an OOM condition is encountered, +** NULL is returned. +** +** If the second argument is not NULL, then its contents are prepended to +** the returned expression text and then freed using sqlite3_free(). +*/ +static char *exprToString(Fts3Expr *pExpr, char *zBuf){ + if( pExpr==0 ){ + return sqlite3_mprintf(""); + } + switch( pExpr->eType ){ + case FTSQUERY_PHRASE: { + Fts3Phrase *pPhrase = pExpr->pPhrase; + int i; + zBuf = sqlite3_mprintf( + "%zPHRASE %d 0", zBuf, pPhrase->iColumn); + for(i=0; zBuf && inToken; i++){ + zBuf = sqlite3_mprintf("%z %.*s%s", zBuf, + pPhrase->aToken[i].n, pPhrase->aToken[i].z, + (pPhrase->aToken[i].isPrefix?"+":"") + ); } + return zBuf; } + + case FTSQUERY_NEAR: + zBuf = sqlite3_mprintf("%zNEAR/%d ", zBuf, pExpr->nNear); + break; + case FTSQUERY_NOT: + zBuf = sqlite3_mprintf("%zNOT ", zBuf); + break; + case FTSQUERY_AND: + zBuf = sqlite3_mprintf("%zAND ", zBuf); + break; + case FTSQUERY_OR: + zBuf = sqlite3_mprintf("%zOR ", zBuf); + break; } - return rc; + if( zBuf ) zBuf = sqlite3_mprintf("%z{", zBuf); + if( zBuf ) zBuf = exprToString(pExpr->pLeft, zBuf); + if( zBuf ) zBuf = sqlite3_mprintf("%z} {", zBuf); + + if( zBuf ) zBuf = exprToString(pExpr->pRight, zBuf); + if( zBuf ) zBuf = sqlite3_mprintf("%z}", zBuf); + + return zBuf; } /* -** The expression pExpr passed as the second argument to this function -** must be of type FTSQUERY_PHRASE. -** -** The returned value is either NULL or a pointer to a buffer containing -** a position-list indicating the occurrences of the phrase in column iCol -** of the current row. +** This is the implementation of a scalar SQL function used to test the +** expression parser. It should be called as follows: ** -** More specifically, the returned buffer contains 1 varint for each -** occurence of the phrase in the column, stored using the normal (delta+2) -** compression and is terminated by either an 0x01 or 0x00 byte. For example, -** if the requested column contains "a b X c d X X" and the position-list -** for 'X' is requested, the buffer returned may contain: +** fts3_exprtest(, , , ...); ** -** 0x04 0x05 0x03 0x01 or 0x04 0x05 0x03 0x00 +** The first argument, , is the name of the fts3 tokenizer used +** to parse the query expression (see README.tokenizers). The second argument +** is the query expression to parse. Each subsequent argument is the name +** of a column of the fts3 table that the query expression may refer to. +** For example: ** -** This function works regardless of whether or not the phrase is deferred, -** incremental, or neither. +** SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2'); */ -SQLITE_PRIVATE char *sqlite3Fts3EvalPhrasePoslist( - Fts3Cursor *pCsr, /* FTS3 cursor object */ - Fts3Expr *pExpr, /* Phrase to return doclist for */ - int iCol /* Column to return position list for */ +static void fts3ExprTest( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - Fts3Phrase *pPhrase = pExpr->pPhrase; - Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; - char *pIter = pPhrase->doclist.pList; - int iThis; + sqlite3_tokenizer_module const *pModule = 0; + sqlite3_tokenizer *pTokenizer = 0; + int rc; + char **azCol = 0; + const char *zExpr; + int nExpr; + int nCol; + int ii; + Fts3Expr *pExpr; + char *zBuf = 0; + sqlite3 *db = sqlite3_context_db_handle(context); + + if( argc<3 ){ + sqlite3_result_error(context, + "Usage: fts3_exprtest(tokenizer, expr, col1, ...", -1 + ); + return; + } + + rc = queryTestTokenizer(db, + (const char *)sqlite3_value_text(argv[0]), &pModule); + if( rc==SQLITE_NOMEM ){ + sqlite3_result_error_nomem(context); + goto exprtest_out; + }else if( !pModule ){ + sqlite3_result_error(context, "No such tokenizer module", -1); + goto exprtest_out; + } - assert( iCol>=0 && iColnColumn ); - if( !pIter - || pExpr->bEof - || pExpr->iDocid!=pCsr->iPrevId - || (pPhrase->iColumnnColumn && pPhrase->iColumn!=iCol) - ){ - return 0; + rc = pModule->xCreate(0, 0, &pTokenizer); + assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); + if( rc==SQLITE_NOMEM ){ + sqlite3_result_error_nomem(context); + goto exprtest_out; } + pTokenizer->pModule = pModule; - assert( pPhrase->doclist.nList>0 ); - if( *pIter==0x01 ){ - pIter++; - pIter += sqlite3Fts3GetVarint32(pIter, &iThis); + zExpr = (const char *)sqlite3_value_text(argv[1]); + nExpr = sqlite3_value_bytes(argv[1]); + nCol = argc-2; + azCol = (char **)sqlite3_malloc(nCol*sizeof(char *)); + if( !azCol ){ + sqlite3_result_error_nomem(context); + goto exprtest_out; + } + for(ii=0; iixDestroy(pTokenizer); + } + sqlite3_free(azCol); } /* -** Free all components of the Fts3Phrase structure that were allocated by -** the eval module. Specifically, this means to free: -** -** * the contents of pPhrase->doclist, and -** * any Fts3MultiSegReader objects held by phrase tokens. +** Register the query expression parser test function fts3_exprtest() +** with database connection db. */ -SQLITE_PRIVATE void sqlite3Fts3EvalPhraseCleanup(Fts3Phrase *pPhrase){ - if( pPhrase ){ - int i; - sqlite3_free(pPhrase->doclist.aAll); - fts3EvalZeroPoslist(pPhrase); - memset(&pPhrase->doclist, 0, sizeof(Fts3Doclist)); - for(i=0; inToken; i++){ - fts3SegReaderCursorFree(pPhrase->aToken[i].pSegcsr); - pPhrase->aToken[i].pSegcsr = 0; - } +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3* db){ + int rc = sqlite3_create_function( + db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0 + ); + if( rc==SQLITE_OK ){ + rc = sqlite3_create_function(db, "fts3_exprtest_rebalance", + -1, SQLITE_UTF8, (void *)1, fts3ExprTest, 0, 0 + ); } + return rc; } #endif +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ -/************** End of fts3.c ************************************************/ -/************** Begin file fts3_aux.c ****************************************/ +/************** End of fts3_expr.c *******************************************/ +/************** Begin file fts3_hash.c ***************************************/ /* -** 2011 Jan 27 +** 2001 September 22 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -116443,1257 +137304,1392 @@ SQLITE_PRIVATE void sqlite3Fts3EvalPhraseCleanup(Fts3Phrase *pPhrase){ ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** -****************************************************************************** +************************************************************************* +** This is the implementation of generic hash-tables used in SQLite. +** We've modified it slightly to serve as a standalone hash table +** implementation for the full-text indexing module. +*/ + +/* +** The code in this file is only compiled if: +** +** * The FTS3 module is being built as an extension +** (in which case SQLITE_CORE is not defined), or ** +** * The FTS3 module is being built into the core of +** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). */ #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) +/* #include */ +/* #include */ +/* #include */ -typedef struct Fts3auxTable Fts3auxTable; -typedef struct Fts3auxCursor Fts3auxCursor; -struct Fts3auxTable { - sqlite3_vtab base; /* Base class used by SQLite core */ - Fts3Table *pFts3Tab; -}; +/* +** Malloc and Free functions +*/ +static void *fts3HashMalloc(int n){ + void *p = sqlite3_malloc(n); + if( p ){ + memset(p, 0, n); + } + return p; +} +static void fts3HashFree(void *p){ + sqlite3_free(p); +} -struct Fts3auxCursor { - sqlite3_vtab_cursor base; /* Base class used by SQLite core */ - Fts3MultiSegReader csr; /* Must be right after "base" */ - Fts3SegFilter filter; - char *zStop; - int nStop; /* Byte-length of string zStop */ - int isEof; /* True if cursor is at EOF */ - sqlite3_int64 iRowid; /* Current rowid */ +/* Turn bulk memory into a hash table object by initializing the +** fields of the Hash structure. +** +** "pNew" is a pointer to the hash table that is to be initialized. +** keyClass is one of the constants +** FTS3_HASH_BINARY or FTS3_HASH_STRING. The value of keyClass +** determines what kind of key the hash table will use. "copyKey" is +** true if the hash table should make its own private copy of keys and +** false if it should just use the supplied pointer. +*/ +SQLITE_PRIVATE void sqlite3Fts3HashInit(Fts3Hash *pNew, char keyClass, char copyKey){ + assert( pNew!=0 ); + assert( keyClass>=FTS3_HASH_STRING && keyClass<=FTS3_HASH_BINARY ); + pNew->keyClass = keyClass; + pNew->copyKey = copyKey; + pNew->first = 0; + pNew->count = 0; + pNew->htsize = 0; + pNew->ht = 0; +} - int iCol; /* Current value of 'col' column */ - int nStat; /* Size of aStat[] array */ - struct Fts3auxColstats { - sqlite3_int64 nDoc; /* 'documents' values for current csr row */ - sqlite3_int64 nOcc; /* 'occurrences' values for current csr row */ - } *aStat; -}; +/* Remove all entries from a hash table. Reclaim all memory. +** Call this routine to delete a hash table or to reset a hash table +** to the empty state. +*/ +SQLITE_PRIVATE void sqlite3Fts3HashClear(Fts3Hash *pH){ + Fts3HashElem *elem; /* For looping over all elements of the table */ + + assert( pH!=0 ); + elem = pH->first; + pH->first = 0; + fts3HashFree(pH->ht); + pH->ht = 0; + pH->htsize = 0; + while( elem ){ + Fts3HashElem *next_elem = elem->next; + if( pH->copyKey && elem->pKey ){ + fts3HashFree(elem->pKey); + } + fts3HashFree(elem); + elem = next_elem; + } + pH->count = 0; +} /* -** Schema of the terms table. +** Hash and comparison functions when the mode is FTS3_HASH_STRING */ -#define FTS3_TERMS_SCHEMA "CREATE TABLE x(term, col, documents, occurrences)" +static int fts3StrHash(const void *pKey, int nKey){ + const char *z = (const char *)pKey; + unsigned h = 0; + if( nKey<=0 ) nKey = (int) strlen(z); + while( nKey > 0 ){ + h = (h<<3) ^ h ^ *z++; + nKey--; + } + return (int)(h & 0x7fffffff); +} +static int fts3StrCompare(const void *pKey1, int n1, const void *pKey2, int n2){ + if( n1!=n2 ) return 1; + return strncmp((const char*)pKey1,(const char*)pKey2,n1); +} /* -** This function does all the work for both the xConnect and xCreate methods. -** These tables have no persistent representation of their own, so xConnect -** and xCreate are identical operations. +** Hash and comparison functions when the mode is FTS3_HASH_BINARY */ -static int fts3auxConnectMethod( - sqlite3 *db, /* Database connection */ - void *pUnused, /* Unused */ - int argc, /* Number of elements in argv array */ - const char * const *argv, /* xCreate/xConnect argument array */ - sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ - char **pzErr /* OUT: sqlite3_malloc'd error message */ -){ - char const *zDb; /* Name of database (e.g. "main") */ - char const *zFts3; /* Name of fts3 table */ - int nDb; /* Result of strlen(zDb) */ - int nFts3; /* Result of strlen(zFts3) */ - int nByte; /* Bytes of space to allocate here */ - int rc; /* value returned by declare_vtab() */ - Fts3auxTable *p; /* Virtual table object to return */ +static int fts3BinHash(const void *pKey, int nKey){ + int h = 0; + const char *z = (const char *)pKey; + while( nKey-- > 0 ){ + h = (h<<3) ^ h ^ *(z++); + } + return h & 0x7fffffff; +} +static int fts3BinCompare(const void *pKey1, int n1, const void *pKey2, int n2){ + if( n1!=n2 ) return 1; + return memcmp(pKey1,pKey2,n1); +} - UNUSED_PARAMETER(pUnused); +/* +** Return a pointer to the appropriate hash function given the key class. +** +** The C syntax in this function definition may be unfamilar to some +** programmers, so we provide the following additional explanation: +** +** The name of the function is "ftsHashFunction". The function takes a +** single parameter "keyClass". The return value of ftsHashFunction() +** is a pointer to another function. Specifically, the return value +** of ftsHashFunction() is a pointer to a function that takes two parameters +** with types "const void*" and "int" and returns an "int". +*/ +static int (*ftsHashFunction(int keyClass))(const void*,int){ + if( keyClass==FTS3_HASH_STRING ){ + return &fts3StrHash; + }else{ + assert( keyClass==FTS3_HASH_BINARY ); + return &fts3BinHash; + } +} - /* The user should specify a single argument - the name of an fts3 table. */ - if( argc!=4 ){ - *pzErr = sqlite3_mprintf( - "wrong number of arguments to fts4aux constructor" - ); - return SQLITE_ERROR; +/* +** Return a pointer to the appropriate hash function given the key class. +** +** For help in interpreted the obscure C code in the function definition, +** see the header comment on the previous function. +*/ +static int (*ftsCompareFunction(int keyClass))(const void*,int,const void*,int){ + if( keyClass==FTS3_HASH_STRING ){ + return &fts3StrCompare; + }else{ + assert( keyClass==FTS3_HASH_BINARY ); + return &fts3BinCompare; } +} - zDb = argv[1]; - nDb = strlen(zDb); - zFts3 = argv[3]; - nFts3 = strlen(zFts3); +/* Link an element into the hash table +*/ +static void fts3HashInsertElement( + Fts3Hash *pH, /* The complete hash table */ + struct _fts3ht *pEntry, /* The entry into which pNew is inserted */ + Fts3HashElem *pNew /* The element to be inserted */ +){ + Fts3HashElem *pHead; /* First element already in pEntry */ + pHead = pEntry->chain; + if( pHead ){ + pNew->next = pHead; + pNew->prev = pHead->prev; + if( pHead->prev ){ pHead->prev->next = pNew; } + else { pH->first = pNew; } + pHead->prev = pNew; + }else{ + pNew->next = pH->first; + if( pH->first ){ pH->first->prev = pNew; } + pNew->prev = 0; + pH->first = pNew; + } + pEntry->count++; + pEntry->chain = pNew; +} - rc = sqlite3_declare_vtab(db, FTS3_TERMS_SCHEMA); - if( rc!=SQLITE_OK ) return rc; - nByte = sizeof(Fts3auxTable) + sizeof(Fts3Table) + nDb + nFts3 + 2; - p = (Fts3auxTable *)sqlite3_malloc(nByte); - if( !p ) return SQLITE_NOMEM; - memset(p, 0, nByte); +/* Resize the hash table so that it cantains "new_size" buckets. +** "new_size" must be a power of 2. The hash table might fail +** to resize if sqliteMalloc() fails. +** +** Return non-zero if a memory allocation error occurs. +*/ +static int fts3Rehash(Fts3Hash *pH, int new_size){ + struct _fts3ht *new_ht; /* The new hash table */ + Fts3HashElem *elem, *next_elem; /* For looping over existing elements */ + int (*xHash)(const void*,int); /* The hash function */ - p->pFts3Tab = (Fts3Table *)&p[1]; - p->pFts3Tab->zDb = (char *)&p->pFts3Tab[1]; - p->pFts3Tab->zName = &p->pFts3Tab->zDb[nDb+1]; - p->pFts3Tab->db = db; - p->pFts3Tab->nIndex = 1; + assert( (new_size & (new_size-1))==0 ); + new_ht = (struct _fts3ht *)fts3HashMalloc( new_size*sizeof(struct _fts3ht) ); + if( new_ht==0 ) return 1; + fts3HashFree(pH->ht); + pH->ht = new_ht; + pH->htsize = new_size; + xHash = ftsHashFunction(pH->keyClass); + for(elem=pH->first, pH->first=0; elem; elem = next_elem){ + int h = (*xHash)(elem->pKey, elem->nKey) & (new_size-1); + next_elem = elem->next; + fts3HashInsertElement(pH, &new_ht[h], elem); + } + return 0; +} - memcpy((char *)p->pFts3Tab->zDb, zDb, nDb); - memcpy((char *)p->pFts3Tab->zName, zFts3, nFts3); - sqlite3Fts3Dequote((char *)p->pFts3Tab->zName); +/* This function (for internal use only) locates an element in an +** hash table that matches the given key. The hash for this key has +** already been computed and is passed as the 4th parameter. +*/ +static Fts3HashElem *fts3FindElementByHash( + const Fts3Hash *pH, /* The pH to be searched */ + const void *pKey, /* The key we are searching for */ + int nKey, + int h /* The hash for this key. */ +){ + Fts3HashElem *elem; /* Used to loop thru the element list */ + int count; /* Number of elements left to test */ + int (*xCompare)(const void*,int,const void*,int); /* comparison function */ - *ppVtab = (sqlite3_vtab *)p; - return SQLITE_OK; + if( pH->ht ){ + struct _fts3ht *pEntry = &pH->ht[h]; + elem = pEntry->chain; + count = pEntry->count; + xCompare = ftsCompareFunction(pH->keyClass); + while( count-- && elem ){ + if( (*xCompare)(elem->pKey,elem->nKey,pKey,nKey)==0 ){ + return elem; + } + elem = elem->next; + } + } + return 0; } -/* -** This function does the work for both the xDisconnect and xDestroy methods. -** These tables have no persistent representation of their own, so xDisconnect -** and xDestroy are identical operations. +/* Remove a single entry from the hash table given a pointer to that +** element and a hash on the element's key. */ -static int fts3auxDisconnectMethod(sqlite3_vtab *pVtab){ - Fts3auxTable *p = (Fts3auxTable *)pVtab; - Fts3Table *pFts3 = p->pFts3Tab; - int i; - - /* Free any prepared statements held */ - for(i=0; iaStmt); i++){ - sqlite3_finalize(pFts3->aStmt[i]); +static void fts3RemoveElementByHash( + Fts3Hash *pH, /* The pH containing "elem" */ + Fts3HashElem* elem, /* The element to be removed from the pH */ + int h /* Hash value for the element */ +){ + struct _fts3ht *pEntry; + if( elem->prev ){ + elem->prev->next = elem->next; + }else{ + pH->first = elem->next; + } + if( elem->next ){ + elem->next->prev = elem->prev; + } + pEntry = &pH->ht[h]; + if( pEntry->chain==elem ){ + pEntry->chain = elem->next; + } + pEntry->count--; + if( pEntry->count<=0 ){ + pEntry->chain = 0; + } + if( pH->copyKey && elem->pKey ){ + fts3HashFree(elem->pKey); + } + fts3HashFree( elem ); + pH->count--; + if( pH->count<=0 ){ + assert( pH->first==0 ); + assert( pH->count==0 ); + fts3HashClear(pH); } - sqlite3_free(pFts3->zSegmentsTbl); - sqlite3_free(p); - return SQLITE_OK; } -#define FTS4AUX_EQ_CONSTRAINT 1 -#define FTS4AUX_GE_CONSTRAINT 2 -#define FTS4AUX_LE_CONSTRAINT 4 +SQLITE_PRIVATE Fts3HashElem *sqlite3Fts3HashFindElem( + const Fts3Hash *pH, + const void *pKey, + int nKey +){ + int h; /* A hash on key */ + int (*xHash)(const void*,int); /* The hash function */ -/* -** xBestIndex - Analyze a WHERE and ORDER BY clause. + if( pH==0 || pH->ht==0 ) return 0; + xHash = ftsHashFunction(pH->keyClass); + assert( xHash!=0 ); + h = (*xHash)(pKey,nKey); + assert( (pH->htsize & (pH->htsize-1))==0 ); + return fts3FindElementByHash(pH,pKey,nKey, h & (pH->htsize-1)); +} + +/* +** Attempt to locate an element of the hash table pH with a key +** that matches pKey,nKey. Return the data for this element if it is +** found, or NULL if there is no match. */ -static int fts3auxBestIndexMethod( - sqlite3_vtab *pVTab, - sqlite3_index_info *pInfo -){ - int i; - int iEq = -1; - int iGe = -1; - int iLe = -1; +SQLITE_PRIVATE void *sqlite3Fts3HashFind(const Fts3Hash *pH, const void *pKey, int nKey){ + Fts3HashElem *pElem; /* The element that matches key (if any) */ - UNUSED_PARAMETER(pVTab); + pElem = sqlite3Fts3HashFindElem(pH, pKey, nKey); + return pElem ? pElem->data : 0; +} - /* This vtab delivers always results in "ORDER BY term ASC" order. */ - if( pInfo->nOrderBy==1 - && pInfo->aOrderBy[0].iColumn==0 - && pInfo->aOrderBy[0].desc==0 - ){ - pInfo->orderByConsumed = 1; - } +/* Insert an element into the hash table pH. The key is pKey,nKey +** and the data is "data". +** +** If no element exists with a matching key, then a new +** element is created. A copy of the key is made if the copyKey +** flag is set. NULL is returned. +** +** If another element already exists with the same key, then the +** new data replaces the old data and the old data is returned. +** The key is not copied in this instance. If a malloc fails, then +** the new data is returned and the hash table is unchanged. +** +** If the "data" parameter to this function is NULL, then the +** element corresponding to "key" is removed from the hash table. +*/ +SQLITE_PRIVATE void *sqlite3Fts3HashInsert( + Fts3Hash *pH, /* The hash table to insert into */ + const void *pKey, /* The key */ + int nKey, /* Number of bytes in the key */ + void *data /* The data */ +){ + int hraw; /* Raw hash value of the key */ + int h; /* the hash of the key modulo hash table size */ + Fts3HashElem *elem; /* Used to loop thru the element list */ + Fts3HashElem *new_elem; /* New element added to the pH */ + int (*xHash)(const void*,int); /* The hash function */ - /* Search for equality and range constraints on the "term" column. */ - for(i=0; inConstraint; i++){ - if( pInfo->aConstraint[i].usable && pInfo->aConstraint[i].iColumn==0 ){ - int op = pInfo->aConstraint[i].op; - if( op==SQLITE_INDEX_CONSTRAINT_EQ ) iEq = i; - if( op==SQLITE_INDEX_CONSTRAINT_LT ) iLe = i; - if( op==SQLITE_INDEX_CONSTRAINT_LE ) iLe = i; - if( op==SQLITE_INDEX_CONSTRAINT_GT ) iGe = i; - if( op==SQLITE_INDEX_CONSTRAINT_GE ) iGe = i; + assert( pH!=0 ); + xHash = ftsHashFunction(pH->keyClass); + assert( xHash!=0 ); + hraw = (*xHash)(pKey, nKey); + assert( (pH->htsize & (pH->htsize-1))==0 ); + h = hraw & (pH->htsize-1); + elem = fts3FindElementByHash(pH,pKey,nKey,h); + if( elem ){ + void *old_data = elem->data; + if( data==0 ){ + fts3RemoveElementByHash(pH,elem,h); + }else{ + elem->data = data; } + return old_data; } - - if( iEq>=0 ){ - pInfo->idxNum = FTS4AUX_EQ_CONSTRAINT; - pInfo->aConstraintUsage[iEq].argvIndex = 1; - pInfo->estimatedCost = 5; - }else{ - pInfo->idxNum = 0; - pInfo->estimatedCost = 20000; - if( iGe>=0 ){ - pInfo->idxNum += FTS4AUX_GE_CONSTRAINT; - pInfo->aConstraintUsage[iGe].argvIndex = 1; - pInfo->estimatedCost /= 2; - } - if( iLe>=0 ){ - pInfo->idxNum += FTS4AUX_LE_CONSTRAINT; - pInfo->aConstraintUsage[iLe].argvIndex = 1 + (iGe>=0); - pInfo->estimatedCost /= 2; - } + if( data==0 ) return 0; + if( (pH->htsize==0 && fts3Rehash(pH,8)) + || (pH->count>=pH->htsize && fts3Rehash(pH, pH->htsize*2)) + ){ + pH->count = 0; + return data; } - - return SQLITE_OK; + assert( pH->htsize>0 ); + new_elem = (Fts3HashElem*)fts3HashMalloc( sizeof(Fts3HashElem) ); + if( new_elem==0 ) return data; + if( pH->copyKey && pKey!=0 ){ + new_elem->pKey = fts3HashMalloc( nKey ); + if( new_elem->pKey==0 ){ + fts3HashFree(new_elem); + return data; + } + memcpy((void*)new_elem->pKey, pKey, nKey); + }else{ + new_elem->pKey = (void*)pKey; + } + new_elem->nKey = nKey; + pH->count++; + assert( pH->htsize>0 ); + assert( (pH->htsize & (pH->htsize-1))==0 ); + h = hraw & (pH->htsize-1); + fts3HashInsertElement(pH, &pH->ht[h], new_elem); + new_elem->data = data; + return 0; } +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ + +/************** End of fts3_hash.c *******************************************/ +/************** Begin file fts3_porter.c *************************************/ /* -** xOpen - Open a cursor. +** 2006 September 30 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** Implementation of the full-text-search tokenizer that implements +** a Porter stemmer. */ -static int fts3auxOpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ - Fts3auxCursor *pCsr; /* Pointer to cursor object to return */ - - UNUSED_PARAMETER(pVTab); - - pCsr = (Fts3auxCursor *)sqlite3_malloc(sizeof(Fts3auxCursor)); - if( !pCsr ) return SQLITE_NOMEM; - memset(pCsr, 0, sizeof(Fts3auxCursor)); - - *ppCsr = (sqlite3_vtab_cursor *)pCsr; - return SQLITE_OK; -} /* -** xClose - Close a cursor. +** The code in this file is only compiled if: +** +** * The FTS3 module is being built as an extension +** (in which case SQLITE_CORE is not defined), or +** +** * The FTS3 module is being built into the core of +** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). */ -static int fts3auxCloseMethod(sqlite3_vtab_cursor *pCursor){ - Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; - Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - sqlite3Fts3SegmentsClose(pFts3); - sqlite3Fts3SegReaderFinish(&pCsr->csr); - sqlite3_free((void *)pCsr->filter.zTerm); - sqlite3_free(pCsr->zStop); - sqlite3_free(pCsr->aStat); - sqlite3_free(pCsr); - return SQLITE_OK; -} +/* #include */ +/* #include */ +/* #include */ +/* #include */ -static int fts3auxGrowStatArray(Fts3auxCursor *pCsr, int nSize){ - if( nSize>pCsr->nStat ){ - struct Fts3auxColstats *aNew; - aNew = (struct Fts3auxColstats *)sqlite3_realloc(pCsr->aStat, - sizeof(struct Fts3auxColstats) * nSize - ); - if( aNew==0 ) return SQLITE_NOMEM; - memset(&aNew[pCsr->nStat], 0, - sizeof(struct Fts3auxColstats) * (nSize - pCsr->nStat) - ); - pCsr->aStat = aNew; - pCsr->nStat = nSize; - } - return SQLITE_OK; -} /* -** xNext - Advance the cursor to the next row, if any. +** Class derived from sqlite3_tokenizer */ -static int fts3auxNextMethod(sqlite3_vtab_cursor *pCursor){ - Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; - Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; - int rc; - - /* Increment our pretend rowid value. */ - pCsr->iRowid++; - - for(pCsr->iCol++; pCsr->iColnStat; pCsr->iCol++){ - if( pCsr->aStat[pCsr->iCol].nDoc>0 ) return SQLITE_OK; - } - - rc = sqlite3Fts3SegReaderStep(pFts3, &pCsr->csr); - if( rc==SQLITE_ROW ){ - int i = 0; - int nDoclist = pCsr->csr.nDoclist; - char *aDoclist = pCsr->csr.aDoclist; - int iCol; - - int eState = 0; - - if( pCsr->zStop ){ - int n = (pCsr->nStopcsr.nTerm) ? pCsr->nStop : pCsr->csr.nTerm; - int mc = memcmp(pCsr->zStop, pCsr->csr.zTerm, n); - if( mc<0 || (mc==0 && pCsr->csr.nTerm>pCsr->nStop) ){ - pCsr->isEof = 1; - return SQLITE_OK; - } - } - - if( fts3auxGrowStatArray(pCsr, 2) ) return SQLITE_NOMEM; - memset(pCsr->aStat, 0, sizeof(struct Fts3auxColstats) * pCsr->nStat); - iCol = 0; - - while( iaStat[0].nDoc++; - eState = 1; - iCol = 0; - break; - - /* State 1. In this state we are expecting either a 1, indicating - ** that the following integer will be a column number, or the - ** start of a position list for column 0. - ** - ** The only difference between state 1 and state 2 is that if the - ** integer encountered in state 1 is not 0 or 1, then we need to - ** increment the column 0 "nDoc" count for this term. - */ - case 1: - assert( iCol==0 ); - if( v>1 ){ - pCsr->aStat[1].nDoc++; - } - eState = 2; - /* fall through */ - - case 2: - if( v==0 ){ /* 0x00. Next integer will be a docid. */ - eState = 0; - }else if( v==1 ){ /* 0x01. Next integer will be a column number. */ - eState = 3; - }else{ /* 2 or greater. A position. */ - pCsr->aStat[iCol+1].nOcc++; - pCsr->aStat[0].nOcc++; - } - break; +typedef struct porter_tokenizer { + sqlite3_tokenizer base; /* Base class */ +} porter_tokenizer; - /* State 3. The integer just read is a column number. */ - default: assert( eState==3 ); - iCol = (int)v; - if( fts3auxGrowStatArray(pCsr, iCol+2) ) return SQLITE_NOMEM; - pCsr->aStat[iCol+1].nDoc++; - eState = 2; - break; - } - } +/* +** Class derived from sqlite3_tokenizer_cursor +*/ +typedef struct porter_tokenizer_cursor { + sqlite3_tokenizer_cursor base; + const char *zInput; /* input we are tokenizing */ + int nInput; /* size of the input */ + int iOffset; /* current position in zInput */ + int iToken; /* index of next token to be returned */ + char *zToken; /* storage for current token */ + int nAllocated; /* space allocated to zToken buffer */ +} porter_tokenizer_cursor; - pCsr->iCol = 0; - rc = SQLITE_OK; - }else{ - pCsr->isEof = 1; - } - return rc; -} /* -** xFilter - Initialize a cursor to point at the start of its data. +** Create a new tokenizer instance. */ -static int fts3auxFilterMethod( - sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ - int idxNum, /* Strategy index */ - const char *idxStr, /* Unused */ - int nVal, /* Number of elements in apVal */ - sqlite3_value **apVal /* Arguments for the indexing scheme */ +static int porterCreate( + int argc, const char * const *argv, + sqlite3_tokenizer **ppTokenizer ){ - Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; - Fts3Table *pFts3 = ((Fts3auxTable *)pCursor->pVtab)->pFts3Tab; - int rc; - int isScan; - - UNUSED_PARAMETER(nVal); - UNUSED_PARAMETER(idxStr); - - assert( idxStr==0 ); - assert( idxNum==FTS4AUX_EQ_CONSTRAINT || idxNum==0 - || idxNum==FTS4AUX_LE_CONSTRAINT || idxNum==FTS4AUX_GE_CONSTRAINT - || idxNum==(FTS4AUX_LE_CONSTRAINT|FTS4AUX_GE_CONSTRAINT) - ); - isScan = (idxNum!=FTS4AUX_EQ_CONSTRAINT); - - /* In case this cursor is being reused, close and zero it. */ - testcase(pCsr->filter.zTerm); - sqlite3Fts3SegReaderFinish(&pCsr->csr); - sqlite3_free((void *)pCsr->filter.zTerm); - sqlite3_free(pCsr->aStat); - memset(&pCsr->csr, 0, ((u8*)&pCsr[1]) - (u8*)&pCsr->csr); - - pCsr->filter.flags = FTS3_SEGMENT_REQUIRE_POS|FTS3_SEGMENT_IGNORE_EMPTY; - if( isScan ) pCsr->filter.flags |= FTS3_SEGMENT_SCAN; - - if( idxNum&(FTS4AUX_EQ_CONSTRAINT|FTS4AUX_GE_CONSTRAINT) ){ - const unsigned char *zStr = sqlite3_value_text(apVal[0]); - if( zStr ){ - pCsr->filter.zTerm = sqlite3_mprintf("%s", zStr); - pCsr->filter.nTerm = sqlite3_value_bytes(apVal[0]); - if( pCsr->filter.zTerm==0 ) return SQLITE_NOMEM; - } - } - if( idxNum&FTS4AUX_LE_CONSTRAINT ){ - int iIdx = (idxNum&FTS4AUX_GE_CONSTRAINT) ? 1 : 0; - pCsr->zStop = sqlite3_mprintf("%s", sqlite3_value_text(apVal[iIdx])); - pCsr->nStop = sqlite3_value_bytes(apVal[iIdx]); - if( pCsr->zStop==0 ) return SQLITE_NOMEM; - } + porter_tokenizer *t; - rc = sqlite3Fts3SegReaderCursor(pFts3, 0, FTS3_SEGCURSOR_ALL, - pCsr->filter.zTerm, pCsr->filter.nTerm, 0, isScan, &pCsr->csr - ); - if( rc==SQLITE_OK ){ - rc = sqlite3Fts3SegReaderStart(pFts3, &pCsr->csr, &pCsr->filter); - } + UNUSED_PARAMETER(argc); + UNUSED_PARAMETER(argv); - if( rc==SQLITE_OK ) rc = fts3auxNextMethod(pCursor); - return rc; + t = (porter_tokenizer *) sqlite3_malloc(sizeof(*t)); + if( t==NULL ) return SQLITE_NOMEM; + memset(t, 0, sizeof(*t)); + *ppTokenizer = &t->base; + return SQLITE_OK; } /* -** xEof - Return true if the cursor is at EOF, or false otherwise. +** Destroy a tokenizer */ -static int fts3auxEofMethod(sqlite3_vtab_cursor *pCursor){ - Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; - return pCsr->isEof; +static int porterDestroy(sqlite3_tokenizer *pTokenizer){ + sqlite3_free(pTokenizer); + return SQLITE_OK; } /* -** xColumn - Return a column value. +** Prepare to begin tokenizing a particular string. The input +** string to be tokenized is zInput[0..nInput-1]. A cursor +** used to incrementally tokenize this string is returned in +** *ppCursor. */ -static int fts3auxColumnMethod( - sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ - sqlite3_context *pContext, /* Context for sqlite3_result_xxx() calls */ - int iCol /* Index of column to read value from */ +static int porterOpen( + sqlite3_tokenizer *pTokenizer, /* The tokenizer */ + const char *zInput, int nInput, /* String to be tokenized */ + sqlite3_tokenizer_cursor **ppCursor /* OUT: Tokenization cursor */ ){ - Fts3auxCursor *p = (Fts3auxCursor *)pCursor; + porter_tokenizer_cursor *c; - assert( p->isEof==0 ); - if( iCol==0 ){ /* Column "term" */ - sqlite3_result_text(pContext, p->csr.zTerm, p->csr.nTerm, SQLITE_TRANSIENT); - }else if( iCol==1 ){ /* Column "col" */ - if( p->iCol ){ - sqlite3_result_int(pContext, p->iCol-1); - }else{ - sqlite3_result_text(pContext, "*", -1, SQLITE_STATIC); - } - }else if( iCol==2 ){ /* Column "documents" */ - sqlite3_result_int64(pContext, p->aStat[p->iCol].nDoc); - }else{ /* Column "occurrences" */ - sqlite3_result_int64(pContext, p->aStat[p->iCol].nOcc); + UNUSED_PARAMETER(pTokenizer); + + c = (porter_tokenizer_cursor *) sqlite3_malloc(sizeof(*c)); + if( c==NULL ) return SQLITE_NOMEM; + + c->zInput = zInput; + if( zInput==0 ){ + c->nInput = 0; + }else if( nInput<0 ){ + c->nInput = (int)strlen(zInput); + }else{ + c->nInput = nInput; } + c->iOffset = 0; /* start tokenizing at the beginning */ + c->iToken = 0; + c->zToken = NULL; /* no space allocated, yet. */ + c->nAllocated = 0; + *ppCursor = &c->base; return SQLITE_OK; } /* -** xRowid - Return the current rowid for the cursor. +** Close a tokenization cursor previously opened by a call to +** porterOpen() above. */ -static int fts3auxRowidMethod( - sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ - sqlite_int64 *pRowid /* OUT: Rowid value */ -){ - Fts3auxCursor *pCsr = (Fts3auxCursor *)pCursor; - *pRowid = pCsr->iRowid; +static int porterClose(sqlite3_tokenizer_cursor *pCursor){ + porter_tokenizer_cursor *c = (porter_tokenizer_cursor *) pCursor; + sqlite3_free(c->zToken); + sqlite3_free(c); return SQLITE_OK; } - /* -** Register the fts3aux module with database connection db. Return SQLITE_OK -** if successful or an error code if sqlite3_create_module() fails. +** Vowel or consonant */ -SQLITE_PRIVATE int sqlite3Fts3InitAux(sqlite3 *db){ - static const sqlite3_module fts3aux_module = { - 0, /* iVersion */ - fts3auxConnectMethod, /* xCreate */ - fts3auxConnectMethod, /* xConnect */ - fts3auxBestIndexMethod, /* xBestIndex */ - fts3auxDisconnectMethod, /* xDisconnect */ - fts3auxDisconnectMethod, /* xDestroy */ - fts3auxOpenMethod, /* xOpen */ - fts3auxCloseMethod, /* xClose */ - fts3auxFilterMethod, /* xFilter */ - fts3auxNextMethod, /* xNext */ - fts3auxEofMethod, /* xEof */ - fts3auxColumnMethod, /* xColumn */ - fts3auxRowidMethod, /* xRowid */ - 0, /* xUpdate */ - 0, /* xBegin */ - 0, /* xSync */ - 0, /* xCommit */ - 0, /* xRollback */ - 0, /* xFindFunction */ - 0, /* xRename */ - 0, /* xSavepoint */ - 0, /* xRelease */ - 0 /* xRollbackTo */ - }; - int rc; /* Return code */ - - rc = sqlite3_create_module(db, "fts4aux", &fts3aux_module, 0); - return rc; -} - -#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ +static const char cType[] = { + 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 0, + 1, 1, 1, 2, 1 +}; -/************** End of fts3_aux.c ********************************************/ -/************** Begin file fts3_expr.c ***************************************/ /* -** 2008 Nov 28 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** isConsonant() and isVowel() determine if their first character in +** the string they point to is a consonant or a vowel, according +** to Porter ruls. ** -****************************************************************************** +** A consonate is any letter other than 'a', 'e', 'i', 'o', or 'u'. +** 'Y' is a consonant unless it follows another consonant, +** in which case it is a vowel. ** -** This module contains code that implements a parser for fts3 query strings -** (the right-hand argument to the MATCH operator). Because the supported -** syntax is relatively simple, the whole tokenizer/parser system is -** hand-coded. +** In these routine, the letters are in reverse order. So the 'y' rule +** is that 'y' is a consonant unless it is followed by another +** consonent. */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) +static int isVowel(const char*); +static int isConsonant(const char *z){ + int j; + char x = *z; + if( x==0 ) return 0; + assert( x>='a' && x<='z' ); + j = cType[x-'a']; + if( j<2 ) return j; + return z[1]==0 || isVowel(z + 1); +} +static int isVowel(const char *z){ + int j; + char x = *z; + if( x==0 ) return 0; + assert( x>='a' && x<='z' ); + j = cType[x-'a']; + if( j<2 ) return 1-j; + return isConsonant(z + 1); +} /* -** By default, this module parses the legacy syntax that has been -** traditionally used by fts3. Or, if SQLITE_ENABLE_FTS3_PARENTHESIS -** is defined, then it uses the new syntax. The differences between -** the new and the old syntaxes are: -** -** a) The new syntax supports parenthesis. The old does not. -** -** b) The new syntax supports the AND and NOT operators. The old does not. -** -** c) The old syntax supports the "-" token qualifier. This is not -** supported by the new syntax (it is replaced by the NOT operator). -** -** d) When using the old syntax, the OR operator has a greater precedence -** than an implicit AND. When using the new, both implicity and explicit -** AND operators have a higher precedence than OR. -** -** If compiled with SQLITE_TEST defined, then this module exports the -** symbol "int sqlite3_fts3_enable_parentheses". Setting this variable -** to zero causes the module to use the old syntax. If it is set to -** non-zero the new syntax is activated. This is so both syntaxes can -** be tested using a single build of testfixture. -** -** The following describes the syntax supported by the fts3 MATCH -** operator in a similar format to that used by the lemon parser -** generator. This module does not use actually lemon, it uses a -** custom parser. -** -** query ::= andexpr (OR andexpr)*. -** -** andexpr ::= notexpr (AND? notexpr)*. +** Let any sequence of one or more vowels be represented by V and let +** C be sequence of one or more consonants. Then every word can be +** represented as: ** -** notexpr ::= nearexpr (NOT nearexpr|-TOKEN)*. -** notexpr ::= LP query RP. +** [C] (VC){m} [V] ** -** nearexpr ::= phrase (NEAR distance_opt nearexpr)*. +** In prose: A word is an optional consonant followed by zero or +** vowel-consonant pairs followed by an optional vowel. "m" is the +** number of vowel consonant pairs. This routine computes the value +** of m for the first i bytes of a word. ** -** distance_opt ::= . -** distance_opt ::= / INTEGER. +** Return true if the m-value for z is 1 or more. In other words, +** return true if z contains at least one vowel that is followed +** by a consonant. ** -** phrase ::= TOKEN. -** phrase ::= COLUMN:TOKEN. -** phrase ::= "TOKEN TOKEN TOKEN...". +** In this routine z[] is in reverse order. So we are really looking +** for an instance of of a consonant followed by a vowel. */ +static int m_gt_0(const char *z){ + while( isVowel(z) ){ z++; } + if( *z==0 ) return 0; + while( isConsonant(z) ){ z++; } + return *z!=0; +} -#ifdef SQLITE_TEST -SQLITE_API int sqlite3_fts3_enable_parentheses = 0; -#else -# ifdef SQLITE_ENABLE_FTS3_PARENTHESIS -# define sqlite3_fts3_enable_parentheses 1 -# else -# define sqlite3_fts3_enable_parentheses 0 -# endif -#endif - -/* -** Default span for NEAR operators. +/* Like mgt0 above except we are looking for a value of m which is +** exactly 1 */ -#define SQLITE_FTS3_DEFAULT_NEAR_PARAM 10 +static int m_eq_1(const char *z){ + while( isVowel(z) ){ z++; } + if( *z==0 ) return 0; + while( isConsonant(z) ){ z++; } + if( *z==0 ) return 0; + while( isVowel(z) ){ z++; } + if( *z==0 ) return 1; + while( isConsonant(z) ){ z++; } + return *z==0; +} +/* Like mgt0 above except we are looking for a value of m>1 instead +** or m>0 +*/ +static int m_gt_1(const char *z){ + while( isVowel(z) ){ z++; } + if( *z==0 ) return 0; + while( isConsonant(z) ){ z++; } + if( *z==0 ) return 0; + while( isVowel(z) ){ z++; } + if( *z==0 ) return 0; + while( isConsonant(z) ){ z++; } + return *z!=0; +} /* -** isNot: -** This variable is used by function getNextNode(). When getNextNode() is -** called, it sets ParseContext.isNot to true if the 'next node' is a -** FTSQUERY_PHRASE with a unary "-" attached to it. i.e. "mysql" in the -** FTS3 query "sqlite -mysql". Otherwise, ParseContext.isNot is set to -** zero. +** Return TRUE if there is a vowel anywhere within z[0..n-1] */ -typedef struct ParseContext ParseContext; -struct ParseContext { - sqlite3_tokenizer *pTokenizer; /* Tokenizer module */ - const char **azCol; /* Array of column names for fts3 table */ - int nCol; /* Number of entries in azCol[] */ - int iDefaultCol; /* Default column to query */ - int isNot; /* True if getNextNode() sees a unary - */ - sqlite3_context *pCtx; /* Write error message here */ - int nNest; /* Number of nested brackets */ -}; +static int hasVowel(const char *z){ + while( isConsonant(z) ){ z++; } + return *z!=0; +} /* -** This function is equivalent to the standard isspace() function. +** Return TRUE if the word ends in a double consonant. ** -** The standard isspace() can be awkward to use safely, because although it -** is defined to accept an argument of type int, its behaviour when passed -** an integer that falls outside of the range of the unsigned char type -** is undefined (and sometimes, "undefined" means segfault). This wrapper -** is defined to accept an argument of type char, and always returns 0 for -** any values that fall outside of the range of the unsigned char type (i.e. -** negative values). +** The text is reversed here. So we are really looking at +** the first two characters of z[]. */ -static int fts3isspace(char c){ - return c==' ' || c=='\t' || c=='\n' || c=='\r' || c=='\v' || c=='\f'; +static int doubleConsonant(const char *z){ + return isConsonant(z) && z[0]==z[1]; } /* -** Allocate nByte bytes of memory using sqlite3_malloc(). If successful, -** zero the memory before returning a pointer to it. If unsuccessful, -** return NULL. +** Return TRUE if the word ends with three letters which +** are consonant-vowel-consonent and where the final consonant +** is not 'w', 'x', or 'y'. +** +** The word is reversed here. So we are really checking the +** first three letters and the first one cannot be in [wxy]. */ -static void *fts3MallocZero(int nByte){ - void *pRet = sqlite3_malloc(nByte); - if( pRet ) memset(pRet, 0, nByte); - return pRet; +static int star_oh(const char *z){ + return + isConsonant(z) && + z[0]!='w' && z[0]!='x' && z[0]!='y' && + isVowel(z+1) && + isConsonant(z+2); } - /* -** Extract the next token from buffer z (length n) using the tokenizer -** and other information (column names etc.) in pParse. Create an Fts3Expr -** structure of type FTSQUERY_PHRASE containing a phrase consisting of this -** single token and set *ppExpr to point to it. If the end of the buffer is -** reached before a token is found, set *ppExpr to zero. It is the -** responsibility of the caller to eventually deallocate the allocated -** Fts3Expr structure (if any) by passing it to sqlite3_free(). +** If the word ends with zFrom and xCond() is true for the stem +** of the word that preceeds the zFrom ending, then change the +** ending to zTo. ** -** Return SQLITE_OK if successful, or SQLITE_NOMEM if a memory allocation -** fails. +** The input word *pz and zFrom are both in reverse order. zTo +** is in normal order. +** +** Return TRUE if zFrom matches. Return FALSE if zFrom does not +** match. Not that TRUE is returned even if xCond() fails and +** no substitution occurs. */ -static int getNextToken( - ParseContext *pParse, /* fts3 query parse context */ - int iCol, /* Value for Fts3Phrase.iColumn */ - const char *z, int n, /* Input string */ - Fts3Expr **ppExpr, /* OUT: expression */ - int *pnConsumed /* OUT: Number of bytes consumed */ +static int stem( + char **pz, /* The word being stemmed (Reversed) */ + const char *zFrom, /* If the ending matches this... (Reversed) */ + const char *zTo, /* ... change the ending to this (not reversed) */ + int (*xCond)(const char*) /* Condition that must be true */ ){ - sqlite3_tokenizer *pTokenizer = pParse->pTokenizer; - sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; - int rc; - sqlite3_tokenizer_cursor *pCursor; - Fts3Expr *pRet = 0; - int nConsumed = 0; - - rc = pModule->xOpen(pTokenizer, z, n, &pCursor); - if( rc==SQLITE_OK ){ - const char *zToken; - int nToken, iStart, iEnd, iPosition; - int nByte; /* total space to allocate */ - - pCursor->pTokenizer = pTokenizer; - rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition); - - if( rc==SQLITE_OK ){ - nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken; - pRet = (Fts3Expr *)fts3MallocZero(nByte); - if( !pRet ){ - rc = SQLITE_NOMEM; - }else{ - pRet->eType = FTSQUERY_PHRASE; - pRet->pPhrase = (Fts3Phrase *)&pRet[1]; - pRet->pPhrase->nToken = 1; - pRet->pPhrase->iColumn = iCol; - pRet->pPhrase->aToken[0].n = nToken; - pRet->pPhrase->aToken[0].z = (char *)&pRet->pPhrase[1]; - memcpy(pRet->pPhrase->aToken[0].z, zToken, nToken); - - if( iEndpPhrase->aToken[0].isPrefix = 1; - iEnd++; - } - if( !sqlite3_fts3_enable_parentheses && iStart>0 && z[iStart-1]=='-' ){ - pParse->isNot = 1; - } - } - nConsumed = iEnd; - } - - pModule->xClose(pCursor); + char *z = *pz; + while( *zFrom && *zFrom==*z ){ z++; zFrom++; } + if( *zFrom!=0 ) return 0; + if( xCond && !xCond(z) ) return 1; + while( *zTo ){ + *(--z) = *(zTo++); } - - *pnConsumed = nConsumed; - *ppExpr = pRet; - return rc; + *pz = z; + return 1; } - /* -** Enlarge a memory allocation. If an out-of-memory allocation occurs, -** then free the old allocation. +** This is the fallback stemmer used when the porter stemmer is +** inappropriate. The input word is copied into the output with +** US-ASCII case folding. If the input word is too long (more +** than 20 bytes if it contains no digits or more than 6 bytes if +** it contains digits) then word is truncated to 20 or 6 bytes +** by taking 10 or 3 bytes from the beginning and end. */ -static void *fts3ReallocOrFree(void *pOrig, int nNew){ - void *pRet = sqlite3_realloc(pOrig, nNew); - if( !pRet ){ - sqlite3_free(pOrig); +static void copy_stemmer(const char *zIn, int nIn, char *zOut, int *pnOut){ + int i, mx, j; + int hasDigit = 0; + for(i=0; i='A' && c<='Z' ){ + zOut[i] = c - 'A' + 'a'; + }else{ + if( c>='0' && c<='9' ) hasDigit = 1; + zOut[i] = c; + } } - return pRet; + mx = hasDigit ? 3 : 10; + if( nIn>mx*2 ){ + for(j=mx, i=nIn-mx; ipTokenizer; - sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; - int rc; - Fts3Expr *p = 0; - sqlite3_tokenizer_cursor *pCursor = 0; - char *zTemp = 0; - int nTemp = 0; - - const int nSpace = sizeof(Fts3Expr) + sizeof(Fts3Phrase); - int nToken = 0; - - /* The final Fts3Expr data structure, including the Fts3Phrase, - ** Fts3PhraseToken structures token buffers are all stored as a single - ** allocation so that the expression can be freed with a single call to - ** sqlite3_free(). Setting this up requires a two pass approach. - ** - ** The first pass, in the block below, uses a tokenizer cursor to iterate - ** through the tokens in the expression. This pass uses fts3ReallocOrFree() - ** to assemble data in two dynamic buffers: - ** - ** Buffer p: Points to the Fts3Expr structure, followed by the Fts3Phrase - ** structure, followed by the array of Fts3PhraseToken - ** structures. This pass only populates the Fts3PhraseToken array. - ** - ** Buffer zTemp: Contains copies of all tokens. - ** - ** The second pass, in the block that begins "if( rc==SQLITE_DONE )" below, - ** appends buffer zTemp to buffer p, and fills in the Fts3Expr and Fts3Phrase - ** structures. - */ - rc = pModule->xOpen(pTokenizer, zInput, nInput, &pCursor); - if( rc==SQLITE_OK ){ - int ii; - pCursor->pTokenizer = pTokenizer; - for(ii=0; rc==SQLITE_OK; ii++){ - const char *zByte; - int nByte, iBegin, iEnd, iPos; - rc = pModule->xNext(pCursor, &zByte, &nByte, &iBegin, &iEnd, &iPos); - if( rc==SQLITE_OK ){ - Fts3PhraseToken *pToken; - - p = fts3ReallocOrFree(p, nSpace + ii*sizeof(Fts3PhraseToken)); - if( !p ) goto no_mem; - - zTemp = fts3ReallocOrFree(zTemp, nTemp + nByte); - if( !zTemp ) goto no_mem; - - assert( nToken==ii ); - pToken = &((Fts3Phrase *)(&p[1]))->aToken[ii]; - memset(pToken, 0, sizeof(Fts3PhraseToken)); +static void porter_stemmer(const char *zIn, int nIn, char *zOut, int *pnOut){ + int i, j; + char zReverse[28]; + char *z, *z2; + if( nIn<3 || nIn>=(int)sizeof(zReverse)-7 ){ + /* The word is too big or too small for the porter stemmer. + ** Fallback to the copy stemmer */ + copy_stemmer(zIn, nIn, zOut, pnOut); + return; + } + for(i=0, j=sizeof(zReverse)-6; i='A' && c<='Z' ){ + zReverse[j] = c + 'a' - 'A'; + }else if( c>='a' && c<='z' ){ + zReverse[j] = c; + }else{ + /* The use of a character not in [a-zA-Z] means that we fallback + ** to the copy stemmer */ + copy_stemmer(zIn, nIn, zOut, pnOut); + return; + } + } + memset(&zReverse[sizeof(zReverse)-5], 0, 5); + z = &zReverse[j+1]; - memcpy(&zTemp[nTemp], zByte, nByte); - nTemp += nByte; - pToken->n = nByte; - pToken->isPrefix = (iEndxClose(pCursor); - pCursor = 0; + /* Step 1b */ + z2 = z; + if( stem(&z, "dee", "ee", m_gt_0) ){ + /* Do nothing. The work was all in the test */ + }else if( + (stem(&z, "gni", "", hasVowel) || stem(&z, "de", "", hasVowel)) + && z!=z2 + ){ + if( stem(&z, "ta", "ate", 0) || + stem(&z, "lb", "ble", 0) || + stem(&z, "zi", "ize", 0) ){ + /* Do nothing. The work was all in the test */ + }else if( doubleConsonant(z) && (*z!='l' && *z!='s' && *z!='z') ){ + z++; + }else if( m_eq_1(z) && star_oh(z) ){ + *(--z) = 'e'; + } } - if( rc==SQLITE_DONE ){ - int jj; - char *zBuf = 0; + /* Step 1c */ + if( z[0]=='y' && hasVowel(z+1) ){ + z[0] = 'i'; + } - p = fts3ReallocOrFree(p, nSpace + nToken*sizeof(Fts3PhraseToken) + nTemp); - if( !p ) goto no_mem; - memset(p, 0, (char *)&(((Fts3Phrase *)&p[1])->aToken[0])-(char *)p); - p->eType = FTSQUERY_PHRASE; - p->pPhrase = (Fts3Phrase *)&p[1]; - p->pPhrase->iColumn = pParse->iDefaultCol; - p->pPhrase->nToken = nToken; + /* Step 2 */ + switch( z[1] ){ + case 'a': + if( !stem(&z, "lanoita", "ate", m_gt_0) ){ + stem(&z, "lanoit", "tion", m_gt_0); + } + break; + case 'c': + if( !stem(&z, "icne", "ence", m_gt_0) ){ + stem(&z, "icna", "ance", m_gt_0); + } + break; + case 'e': + stem(&z, "rezi", "ize", m_gt_0); + break; + case 'g': + stem(&z, "igol", "log", m_gt_0); + break; + case 'l': + if( !stem(&z, "ilb", "ble", m_gt_0) + && !stem(&z, "illa", "al", m_gt_0) + && !stem(&z, "iltne", "ent", m_gt_0) + && !stem(&z, "ile", "e", m_gt_0) + ){ + stem(&z, "ilsuo", "ous", m_gt_0); + } + break; + case 'o': + if( !stem(&z, "noitazi", "ize", m_gt_0) + && !stem(&z, "noita", "ate", m_gt_0) + ){ + stem(&z, "rota", "ate", m_gt_0); + } + break; + case 's': + if( !stem(&z, "msila", "al", m_gt_0) + && !stem(&z, "ssenevi", "ive", m_gt_0) + && !stem(&z, "ssenluf", "ful", m_gt_0) + ){ + stem(&z, "ssensuo", "ous", m_gt_0); + } + break; + case 't': + if( !stem(&z, "itila", "al", m_gt_0) + && !stem(&z, "itivi", "ive", m_gt_0) + ){ + stem(&z, "itilib", "ble", m_gt_0); + } + break; + } - zBuf = (char *)&p->pPhrase->aToken[nToken]; - memcpy(zBuf, zTemp, nTemp); - sqlite3_free(zTemp); + /* Step 3 */ + switch( z[0] ){ + case 'e': + if( !stem(&z, "etaci", "ic", m_gt_0) + && !stem(&z, "evita", "", m_gt_0) + ){ + stem(&z, "ezila", "al", m_gt_0); + } + break; + case 'i': + stem(&z, "itici", "ic", m_gt_0); + break; + case 'l': + if( !stem(&z, "laci", "ic", m_gt_0) ){ + stem(&z, "luf", "", m_gt_0); + } + break; + case 's': + stem(&z, "ssen", "", m_gt_0); + break; + } - for(jj=0; jjpPhrase->nToken; jj++){ - p->pPhrase->aToken[jj].z = zBuf; - zBuf += p->pPhrase->aToken[jj].n; + /* Step 4 */ + switch( z[1] ){ + case 'a': + if( z[0]=='l' && m_gt_1(z+2) ){ + z += 2; + } + break; + case 'c': + if( z[0]=='e' && z[2]=='n' && (z[3]=='a' || z[3]=='e') && m_gt_1(z+4) ){ + z += 4; + } + break; + case 'e': + if( z[0]=='r' && m_gt_1(z+2) ){ + z += 2; + } + break; + case 'i': + if( z[0]=='c' && m_gt_1(z+2) ){ + z += 2; + } + break; + case 'l': + if( z[0]=='e' && z[2]=='b' && (z[3]=='a' || z[3]=='i') && m_gt_1(z+4) ){ + z += 4; + } + break; + case 'n': + if( z[0]=='t' ){ + if( z[2]=='a' ){ + if( m_gt_1(z+3) ){ + z += 3; + } + }else if( z[2]=='e' ){ + if( !stem(&z, "tneme", "", m_gt_1) + && !stem(&z, "tnem", "", m_gt_1) + ){ + stem(&z, "tne", "", m_gt_1); + } + } + } + break; + case 'o': + if( z[0]=='u' ){ + if( m_gt_1(z+2) ){ + z += 2; + } + }else if( z[3]=='s' || z[3]=='t' ){ + stem(&z, "noi", "", m_gt_1); + } + break; + case 's': + if( z[0]=='m' && z[2]=='i' && m_gt_1(z+3) ){ + z += 3; + } + break; + case 't': + if( !stem(&z, "eta", "", m_gt_1) ){ + stem(&z, "iti", "", m_gt_1); + } + break; + case 'u': + if( z[0]=='s' && z[2]=='o' && m_gt_1(z+3) ){ + z += 3; + } + break; + case 'v': + case 'z': + if( z[0]=='e' && z[2]=='i' && m_gt_1(z+3) ){ + z += 3; + } + break; + } + + /* Step 5a */ + if( z[0]=='e' ){ + if( m_gt_1(z+1) ){ + z++; + }else if( m_eq_1(z+1) && !star_oh(z+1) ){ + z++; } - rc = SQLITE_OK; } - *ppExpr = p; - return rc; -no_mem: + /* Step 5b */ + if( m_gt_1(z) && z[0]=='l' && z[1]=='l' ){ + z++; + } - if( pCursor ){ - pModule->xClose(pCursor); + /* z[] is now the stemmed word in reverse order. Flip it back + ** around into forward order and return. + */ + *pnOut = i = (int)strlen(z); + zOut[i] = 0; + while( *z ){ + zOut[--i] = *(z++); } - sqlite3_free(zTemp); - sqlite3_free(p); - *ppExpr = 0; - return SQLITE_NOMEM; } /* -** Function getNextNode(), which is called by fts3ExprParse(), may itself -** call fts3ExprParse(). So this forward declaration is required. +** Characters that can be part of a token. We assume any character +** whose value is greater than 0x80 (any UTF character) can be +** part of a token. In other words, delimiters all must have +** values of 0x7f or lower. */ -static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *); +static const char porterIdChar[] = { +/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 3x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 4x */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, /* 5x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6x */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* 7x */ +}; +#define isDelim(C) (((ch=C)&0x80)==0 && (ch<0x30 || !porterIdChar[ch-0x30])) /* -** The output variable *ppExpr is populated with an allocated Fts3Expr -** structure, or set to 0 if the end of the input buffer is reached. -** -** Returns an SQLite error code. SQLITE_OK if everything works, SQLITE_NOMEM -** if a malloc failure occurs, or SQLITE_ERROR if a parse error is encountered. -** If SQLITE_ERROR is returned, pContext is populated with an error message. +** Extract the next token from a tokenization cursor. The cursor must +** have been opened by a prior call to porterOpen(). */ -static int getNextNode( - ParseContext *pParse, /* fts3 query parse context */ - const char *z, int n, /* Input string */ - Fts3Expr **ppExpr, /* OUT: expression */ - int *pnConsumed /* OUT: Number of bytes consumed */ -){ - static const struct Fts3Keyword { - char *z; /* Keyword text */ - unsigned char n; /* Length of the keyword */ - unsigned char parenOnly; /* Only valid in paren mode */ - unsigned char eType; /* Keyword code */ - } aKeyword[] = { - { "OR" , 2, 0, FTSQUERY_OR }, - { "AND", 3, 1, FTSQUERY_AND }, - { "NOT", 3, 1, FTSQUERY_NOT }, - { "NEAR", 4, 0, FTSQUERY_NEAR } - }; - int ii; - int iCol; - int iColLen; - int rc; - Fts3Expr *pRet = 0; - - const char *zInput = z; - int nInput = n; - - pParse->isNot = 0; - - /* Skip over any whitespace before checking for a keyword, an open or - ** close bracket, or a quoted string. - */ - while( nInput>0 && fts3isspace(*zInput) ){ - nInput--; - zInput++; - } - if( nInput==0 ){ - return SQLITE_DONE; - } - - /* See if we are dealing with a keyword. */ - for(ii=0; ii<(int)(sizeof(aKeyword)/sizeof(struct Fts3Keyword)); ii++){ - const struct Fts3Keyword *pKey = &aKeyword[ii]; - - if( (pKey->parenOnly & ~sqlite3_fts3_enable_parentheses)!=0 ){ - continue; - } - - if( nInput>=pKey->n && 0==memcmp(zInput, pKey->z, pKey->n) ){ - int nNear = SQLITE_FTS3_DEFAULT_NEAR_PARAM; - int nKey = pKey->n; - char cNext; - - /* If this is a "NEAR" keyword, check for an explicit nearness. */ - if( pKey->eType==FTSQUERY_NEAR ){ - assert( nKey==4 ); - if( zInput[4]=='/' && zInput[5]>='0' && zInput[5]<='9' ){ - nNear = 0; - for(nKey=5; zInput[nKey]>='0' && zInput[nKey]<='9'; nKey++){ - nNear = nNear * 10 + (zInput[nKey] - '0'); - } - } - } +static int porterNext( + sqlite3_tokenizer_cursor *pCursor, /* Cursor returned by porterOpen */ + const char **pzToken, /* OUT: *pzToken is the token text */ + int *pnBytes, /* OUT: Number of bytes in token */ + int *piStartOffset, /* OUT: Starting offset of token */ + int *piEndOffset, /* OUT: Ending offset of token */ + int *piPosition /* OUT: Position integer of token */ +){ + porter_tokenizer_cursor *c = (porter_tokenizer_cursor *) pCursor; + const char *z = c->zInput; - /* At this point this is probably a keyword. But for that to be true, - ** the next byte must contain either whitespace, an open or close - ** parenthesis, a quote character, or EOF. - */ - cNext = zInput[nKey]; - if( fts3isspace(cNext) - || cNext=='"' || cNext=='(' || cNext==')' || cNext==0 - ){ - pRet = (Fts3Expr *)fts3MallocZero(sizeof(Fts3Expr)); - if( !pRet ){ - return SQLITE_NOMEM; - } - pRet->eType = pKey->eType; - pRet->nNear = nNear; - *ppExpr = pRet; - *pnConsumed = (int)((zInput - z) + nKey); - return SQLITE_OK; - } + while( c->iOffsetnInput ){ + int iStartOffset, ch; - /* Turns out that wasn't a keyword after all. This happens if the - ** user has supplied a token such as "ORacle". Continue. - */ + /* Scan past delimiter characters */ + while( c->iOffsetnInput && isDelim(z[c->iOffset]) ){ + c->iOffset++; } - } - /* Check for an open bracket. */ - if( sqlite3_fts3_enable_parentheses ){ - if( *zInput=='(' ){ - int nConsumed; - pParse->nNest++; - rc = fts3ExprParse(pParse, &zInput[1], nInput-1, ppExpr, &nConsumed); - if( rc==SQLITE_OK && !*ppExpr ){ - rc = SQLITE_DONE; - } - *pnConsumed = (int)((zInput - z) + 1 + nConsumed); - return rc; - } - - /* Check for a close bracket. */ - if( *zInput==')' ){ - pParse->nNest--; - *pnConsumed = (int)((zInput - z) + 1); - return SQLITE_DONE; + /* Count non-delimiter characters. */ + iStartOffset = c->iOffset; + while( c->iOffsetnInput && !isDelim(z[c->iOffset]) ){ + c->iOffset++; } - } - /* See if we are dealing with a quoted phrase. If this is the case, then - ** search for the closing quote and pass the whole string to getNextString() - ** for processing. This is easy to do, as fts3 has no syntax for escaping - ** a quote character embedded in a string. - */ - if( *zInput=='"' ){ - for(ii=1; iiiOffset>iStartOffset ){ + int n = c->iOffset-iStartOffset; + if( n>c->nAllocated ){ + char *pNew; + c->nAllocated = n+20; + pNew = sqlite3_realloc(c->zToken, c->nAllocated); + if( !pNew ) return SQLITE_NOMEM; + c->zToken = pNew; + } + porter_stemmer(&z[iStartOffset], n, c->zToken, pnBytes); + *pzToken = c->zToken; + *piStartOffset = iStartOffset; + *piEndOffset = c->iOffset; + *piPosition = c->iToken++; + return SQLITE_OK; } - return getNextString(pParse, &zInput[1], ii-1, ppExpr); } + return SQLITE_DONE; +} +/* +** The set of routines that implement the porter-stemmer tokenizer +*/ +static const sqlite3_tokenizer_module porterTokenizerModule = { + 0, + porterCreate, + porterDestroy, + porterOpen, + porterClose, + porterNext, + 0 +}; - /* If control flows to this point, this must be a regular token, or - ** the end of the input. Read a regular token using the sqlite3_tokenizer - ** interface. Before doing so, figure out if there is an explicit - ** column specifier for the token. - ** - ** TODO: Strangely, it is not possible to associate a column specifier - ** with a quoted phrase, only with a single token. Not sure if this was - ** an implementation artifact or an intentional decision when fts3 was - ** first implemented. Whichever it was, this module duplicates the - ** limitation. - */ - iCol = pParse->iDefaultCol; - iColLen = 0; - for(ii=0; iinCol; ii++){ - const char *zStr = pParse->azCol[ii]; - int nStr = (int)strlen(zStr); - if( nInput>nStr && zInput[nStr]==':' - && sqlite3_strnicmp(zStr, zInput, nStr)==0 - ){ - iCol = ii; - iColLen = (int)((zInput - z) + nStr + 1); - break; - } - } - rc = getNextToken(pParse, iCol, &z[iColLen], n-iColLen, ppExpr, pnConsumed); - *pnConsumed += iColLen; - return rc; +/* +** Allocate a new porter tokenizer. Return a pointer to the new +** tokenizer in *ppModule +*/ +SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule( + sqlite3_tokenizer_module const**ppModule +){ + *ppModule = &porterTokenizerModule; } +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ + +/************** End of fts3_porter.c *****************************************/ +/************** Begin file fts3_tokenizer.c **********************************/ /* -** The argument is an Fts3Expr structure for a binary operator (any type -** except an FTSQUERY_PHRASE). Return an integer value representing the -** precedence of the operator. Lower values have a higher precedence (i.e. -** group more tightly). For example, in the C language, the == operator -** groups more tightly than ||, and would therefore have a higher precedence. +** 2007 June 22 ** -** When using the new fts3 query syntax (when SQLITE_ENABLE_FTS3_PARENTHESIS -** is defined), the order of the operators in precedence from highest to -** lowest is: +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** NEAR -** NOT -** AND (including implicit ANDs) -** OR +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** Note that when using the old query syntax, the OR operator has a higher -** precedence than the AND operator. +****************************************************************************** +** +** This is part of an SQLite module implementing full-text search. +** This particular file implements the generic tokenizer interface. */ -static int opPrecedence(Fts3Expr *p){ - assert( p->eType!=FTSQUERY_PHRASE ); - if( sqlite3_fts3_enable_parentheses ){ - return p->eType; - }else if( p->eType==FTSQUERY_NEAR ){ - return 1; - }else if( p->eType==FTSQUERY_OR ){ - return 2; - } - assert( p->eType==FTSQUERY_AND ); - return 3; -} /* -** Argument ppHead contains a pointer to the current head of a query -** expression tree being parsed. pPrev is the expression node most recently -** inserted into the tree. This function adds pNew, which is always a binary -** operator node, into the expression tree based on the relative precedence -** of pNew and the existing nodes of the tree. This may result in the head -** of the tree changing, in which case *ppHead is set to the new root node. +** The code in this file is only compiled if: +** +** * The FTS3 module is being built as an extension +** (in which case SQLITE_CORE is not defined), or +** +** * The FTS3 module is being built into the core of +** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). */ -static void insertBinaryOperator( - Fts3Expr **ppHead, /* Pointer to the root node of a tree */ - Fts3Expr *pPrev, /* Node most recently inserted into the tree */ - Fts3Expr *pNew /* New binary node to insert into expression tree */ -){ - Fts3Expr *pSplit = pPrev; - while( pSplit->pParent && opPrecedence(pSplit->pParent)<=opPrecedence(pNew) ){ - pSplit = pSplit->pParent; - } +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - if( pSplit->pParent ){ - assert( pSplit->pParent->pRight==pSplit ); - pSplit->pParent->pRight = pNew; - pNew->pParent = pSplit->pParent; - }else{ - *ppHead = pNew; - } - pNew->pLeft = pSplit; - pSplit->pParent = pNew; -} +/* #include */ +/* #include */ /* -** Parse the fts3 query expression found in buffer z, length n. This function -** returns either when the end of the buffer is reached or an unmatched -** closing bracket - ')' - is encountered. +** Implementation of the SQL scalar function for accessing the underlying +** hash table. This function may be called as follows: ** -** If successful, SQLITE_OK is returned, *ppExpr is set to point to the -** parsed form of the expression and *pnConsumed is set to the number of -** bytes read from buffer z. Otherwise, *ppExpr is set to 0 and SQLITE_NOMEM -** (out of memory error) or SQLITE_ERROR (parse error) is returned. +** SELECT (); +** SELECT (, ); +** +** where is the name passed as the second argument +** to the sqlite3Fts3InitHashTable() function (e.g. 'fts3_tokenizer'). +** +** If the argument is specified, it must be a blob value +** containing a pointer to be stored as the hash data corresponding +** to the string . If is not specified, then +** the string must already exist in the has table. Otherwise, +** an error is returned. +** +** Whether or not the argument is specified, the value returned +** is a blob containing the pointer stored as the hash data corresponding +** to string (after the hash-table is updated, if applicable). */ -static int fts3ExprParse( - ParseContext *pParse, /* fts3 query parse context */ - const char *z, int n, /* Text of MATCH query */ - Fts3Expr **ppExpr, /* OUT: Parsed query structure */ - int *pnConsumed /* OUT: Number of bytes consumed */ +static void scalarFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - Fts3Expr *pRet = 0; - Fts3Expr *pPrev = 0; - Fts3Expr *pNotBranch = 0; /* Only used in legacy parse mode */ - int nIn = n; - const char *zIn = z; - int rc = SQLITE_OK; - int isRequirePhrase = 1; + Fts3Hash *pHash; + void *pPtr = 0; + const unsigned char *zName; + int nName; - while( rc==SQLITE_OK ){ - Fts3Expr *p = 0; - int nByte = 0; - rc = getNextNode(pParse, zIn, nIn, &p, &nByte); - if( rc==SQLITE_OK ){ - int isPhrase; + assert( argc==1 || argc==2 ); - if( !sqlite3_fts3_enable_parentheses - && p->eType==FTSQUERY_PHRASE && pParse->isNot - ){ - /* Create an implicit NOT operator. */ - Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr)); - if( !pNot ){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_NOMEM; - goto exprparse_out; - } - pNot->eType = FTSQUERY_NOT; - pNot->pRight = p; - if( pNotBranch ){ - pNot->pLeft = pNotBranch; - } - pNotBranch = pNot; - p = pPrev; - }else{ - int eType = p->eType; - isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft); + pHash = (Fts3Hash *)sqlite3_user_data(context); - /* The isRequirePhrase variable is set to true if a phrase or - ** an expression contained in parenthesis is required. If a - ** binary operator (AND, OR, NOT or NEAR) is encounted when - ** isRequirePhrase is set, this is a syntax error. - */ - if( !isPhrase && isRequirePhrase ){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_ERROR; - goto exprparse_out; - } - - if( isPhrase && !isRequirePhrase ){ - /* Insert an implicit AND operator. */ - Fts3Expr *pAnd; - assert( pRet && pPrev ); - pAnd = fts3MallocZero(sizeof(Fts3Expr)); - if( !pAnd ){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_NOMEM; - goto exprparse_out; - } - pAnd->eType = FTSQUERY_AND; - insertBinaryOperator(&pRet, pPrev, pAnd); - pPrev = pAnd; - } + zName = sqlite3_value_text(argv[0]); + nName = sqlite3_value_bytes(argv[0])+1; - /* This test catches attempts to make either operand of a NEAR - ** operator something other than a phrase. For example, either of - ** the following: - ** - ** (bracketed expression) NEAR phrase - ** phrase NEAR (bracketed expression) - ** - ** Return an error in either case. - */ - if( pPrev && ( - (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE) - || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR) - )){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_ERROR; - goto exprparse_out; - } - - if( isPhrase ){ - if( pRet ){ - assert( pPrev && pPrev->pLeft && pPrev->pRight==0 ); - pPrev->pRight = p; - p->pParent = pPrev; - }else{ - pRet = p; - } + if( argc==2 ){ + void *pOld; + int n = sqlite3_value_bytes(argv[1]); + if( n!=sizeof(pPtr) ){ + sqlite3_result_error(context, "argument type mismatch", -1); + return; + } + pPtr = *(void **)sqlite3_value_blob(argv[1]); + pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr); + if( pOld==pPtr ){ + sqlite3_result_error(context, "out of memory", -1); + return; + } + }else{ + pPtr = sqlite3Fts3HashFind(pHash, zName, nName); + if( !pPtr ){ + char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); + return; + } + } + + sqlite3_result_blob(context, (void *)&pPtr, sizeof(pPtr), SQLITE_TRANSIENT); +} + +SQLITE_PRIVATE int sqlite3Fts3IsIdChar(char c){ + static const char isFtsIdChar[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 1x */ + 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 2x */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 3x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 4x */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, /* 5x */ + 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6x */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* 7x */ + }; + return (c&0x80 || isFtsIdChar[(int)(c)]); +} + +SQLITE_PRIVATE const char *sqlite3Fts3NextToken(const char *zStr, int *pn){ + const char *z1; + const char *z2 = 0; + + /* Find the start of the next token. */ + z1 = zStr; + while( z2==0 ){ + char c = *z1; + switch( c ){ + case '\0': return 0; /* No more tokens here */ + case '\'': + case '"': + case '`': { + z2 = z1; + while( *++z2 && (*z2!=c || *++z2==c) ); + break; + } + case '[': + z2 = &z1[1]; + while( *z2 && z2[0]!=']' ) z2++; + if( *z2 ) z2++; + break; + + default: + if( sqlite3Fts3IsIdChar(*z1) ){ + z2 = &z1[1]; + while( sqlite3Fts3IsIdChar(*z2) ) z2++; }else{ - insertBinaryOperator(&pRet, pPrev, p); + z1++; } - isRequirePhrase = !isPhrase; - } - assert( nByte>0 ); } - assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) ); - nIn -= nByte; - zIn += nByte; - pPrev = p; } - if( rc==SQLITE_DONE && pRet && isRequirePhrase ){ - rc = SQLITE_ERROR; - } + *pn = (int)(z2-z1); + return z1; +} - if( rc==SQLITE_DONE ){ - rc = SQLITE_OK; - if( !sqlite3_fts3_enable_parentheses && pNotBranch ){ - if( !pRet ){ - rc = SQLITE_ERROR; - }else{ - Fts3Expr *pIter = pNotBranch; - while( pIter->pLeft ){ - pIter = pIter->pLeft; - } - pIter->pLeft = pRet; - pRet = pNotBranch; +SQLITE_PRIVATE int sqlite3Fts3InitTokenizer( + Fts3Hash *pHash, /* Tokenizer hash table */ + const char *zArg, /* Tokenizer name */ + sqlite3_tokenizer **ppTok, /* OUT: Tokenizer (if applicable) */ + char **pzErr /* OUT: Set to malloced error message */ +){ + int rc; + char *z = (char *)zArg; + int n = 0; + char *zCopy; + char *zEnd; /* Pointer to nul-term of zCopy */ + sqlite3_tokenizer_module *m; + + zCopy = sqlite3_mprintf("%s", zArg); + if( !zCopy ) return SQLITE_NOMEM; + zEnd = &zCopy[strlen(zCopy)]; + + z = (char *)sqlite3Fts3NextToken(zCopy, &n); + z[n] = '\0'; + sqlite3Fts3Dequote(z); + + m = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash,z,(int)strlen(z)+1); + if( !m ){ + *pzErr = sqlite3_mprintf("unknown tokenizer: %s", z); + rc = SQLITE_ERROR; + }else{ + char const **aArg = 0; + int iArg = 0; + z = &z[n+1]; + while( zxCreate(iArg, aArg, ppTok); + assert( rc!=SQLITE_OK || *ppTok ); + if( rc!=SQLITE_OK ){ + *pzErr = sqlite3_mprintf("unknown tokenizer"); + }else{ + (*ppTok)->pModule = m; } + sqlite3_free((void *)aArg); } - *pnConsumed = n - nIn; -exprparse_out: - if( rc!=SQLITE_OK ){ - sqlite3Fts3ExprFree(pRet); - sqlite3Fts3ExprFree(pNotBranch); - pRet = 0; - } - *ppExpr = pRet; + sqlite3_free(zCopy); return rc; } + +#ifdef SQLITE_TEST + +#include +/* #include */ + /* -** Parameters z and n contain a pointer to and length of a buffer containing -** an fts3 query expression, respectively. This function attempts to parse the -** query expression and create a tree of Fts3Expr structures representing the -** parsed expression. If successful, *ppExpr is set to point to the head -** of the parsed expression tree and SQLITE_OK is returned. If an error -** occurs, either SQLITE_NOMEM (out-of-memory error) or SQLITE_ERROR (parse -** error) is returned and *ppExpr is set to 0. +** Implementation of a special SQL scalar function for testing tokenizers +** designed to be used in concert with the Tcl testing framework. This +** function must be called with two or more arguments: ** -** If parameter n is a negative number, then z is assumed to point to a -** nul-terminated string and the length is determined using strlen(). +** SELECT (, ..., ); ** -** The first parameter, pTokenizer, is passed the fts3 tokenizer module to -** use to normalize query tokens while parsing the expression. The azCol[] -** array, which is assumed to contain nCol entries, should contain the names -** of each column in the target fts3 table, in order from left to right. -** Column names must be nul-terminated strings. +** where is the name passed as the second argument +** to the sqlite3Fts3InitHashTable() function (e.g. 'fts3_tokenizer') +** concatenated with the string '_test' (e.g. 'fts3_tokenizer_test'). ** -** The iDefaultCol parameter should be passed the index of the table column -** that appears on the left-hand-side of the MATCH operator (the default -** column to match against for tokens for which a column name is not explicitly -** specified as part of the query string), or -1 if tokens may by default -** match any table column. +** The return value is a string that may be interpreted as a Tcl +** list. For each token in the , three elements are +** added to the returned list. The first is the token position, the +** second is the token text (folded, stemmed, etc.) and the third is the +** substring of associated with the token. For example, +** using the built-in "simple" tokenizer: +** +** SELECT fts_tokenizer_test('simple', 'I don't see how'); +** +** will return the string: +** +** "{0 i I 1 dont don't 2 see see 3 how how}" +** */ -SQLITE_PRIVATE int sqlite3Fts3ExprParse( - sqlite3_tokenizer *pTokenizer, /* Tokenizer module */ - char **azCol, /* Array of column names for fts3 table */ - int nCol, /* Number of entries in azCol[] */ - int iDefaultCol, /* Default column to query */ - const char *z, int n, /* Text of MATCH query */ - Fts3Expr **ppExpr /* OUT: Parsed query structure */ +static void testFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv ){ - int nParsed; - int rc; - ParseContext sParse; - sParse.pTokenizer = pTokenizer; - sParse.azCol = (const char **)azCol; - sParse.nCol = nCol; - sParse.iDefaultCol = iDefaultCol; - sParse.nNest = 0; - if( z==0 ){ - *ppExpr = 0; - return SQLITE_OK; + Fts3Hash *pHash; + sqlite3_tokenizer_module *p; + sqlite3_tokenizer *pTokenizer = 0; + sqlite3_tokenizer_cursor *pCsr = 0; + + const char *zErr = 0; + + const char *zName; + int nName; + const char *zInput; + int nInput; + + const char *azArg[64]; + + const char *zToken; + int nToken = 0; + int iStart = 0; + int iEnd = 0; + int iPos = 0; + int i; + + Tcl_Obj *pRet; + + if( argc<2 ){ + sqlite3_result_error(context, "insufficient arguments", -1); + return; } - if( n<0 ){ - n = (int)strlen(z); + + nName = sqlite3_value_bytes(argv[0]); + zName = (const char *)sqlite3_value_text(argv[0]); + nInput = sqlite3_value_bytes(argv[argc-1]); + zInput = (const char *)sqlite3_value_text(argv[argc-1]); + + pHash = (Fts3Hash *)sqlite3_user_data(context); + p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1); + + if( !p ){ + char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); + return; } - rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed); - /* Check for mismatched parenthesis */ - if( rc==SQLITE_OK && sParse.nNest ){ - rc = SQLITE_ERROR; - sqlite3Fts3ExprFree(*ppExpr); - *ppExpr = 0; + pRet = Tcl_NewObj(); + Tcl_IncrRefCount(pRet); + + for(i=1; ixCreate(argc-2, azArg, &pTokenizer) ){ + zErr = "error in xCreate()"; + goto finish; + } + pTokenizer->pModule = p; + if( sqlite3Fts3OpenTokenizer(pTokenizer, 0, zInput, nInput, &pCsr) ){ + zErr = "error in xOpen()"; + goto finish; + } -/* -** Free a parsed fts3 query expression allocated by sqlite3Fts3ExprParse(). -*/ -SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *p){ - if( p ){ - assert( p->eType==FTSQUERY_PHRASE || p->pPhrase==0 ); - sqlite3Fts3ExprFree(p->pLeft); - sqlite3Fts3ExprFree(p->pRight); - sqlite3Fts3EvalPhraseCleanup(p->pPhrase); - sqlite3_free(p->aMI); - sqlite3_free(p); + while( SQLITE_OK==p->xNext(pCsr, &zToken, &nToken, &iStart, &iEnd, &iPos) ){ + Tcl_ListObjAppendElement(0, pRet, Tcl_NewIntObj(iPos)); + Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zToken, nToken)); + zToken = &zInput[iStart]; + nToken = iEnd-iStart; + Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zToken, nToken)); + } + + if( SQLITE_OK!=p->xClose(pCsr) ){ + zErr = "error in xClose()"; + goto finish; + } + if( SQLITE_OK!=p->xDestroy(pTokenizer) ){ + zErr = "error in xDestroy()"; + goto finish; + } + +finish: + if( zErr ){ + sqlite3_result_error(context, zErr, -1); + }else{ + sqlite3_result_text(context, Tcl_GetString(pRet), -1, SQLITE_TRANSIENT); } + Tcl_DecrRefCount(pRet); } -/**************************************************************************** -***************************************************************************** -** Everything after this point is just test code. -*/ +static +int registerTokenizer( + sqlite3 *db, + char *zName, + const sqlite3_tokenizer_module *p +){ + int rc; + sqlite3_stmt *pStmt; + const char zSql[] = "SELECT fts3_tokenizer(?, ?)"; -#ifdef SQLITE_TEST + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + if( rc!=SQLITE_OK ){ + return rc; + } + sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); + sqlite3_bind_blob(pStmt, 2, &p, sizeof(p), SQLITE_STATIC); + sqlite3_step(pStmt); -/* -** Function to query the hash-table of tokenizers (see README.tokenizers). -*/ -static int queryTestTokenizer( + return sqlite3_finalize(pStmt); +} + +static +int queryTokenizer( sqlite3 *db, - const char *zName, + char *zName, const sqlite3_tokenizer_module **pp ){ int rc; @@ -117716,162 +138712,362 @@ static int queryTestTokenizer( return sqlite3_finalize(pStmt); } +SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule); + /* -** Return a pointer to a buffer containing a text representation of the -** expression passed as the first argument. The buffer is obtained from -** sqlite3_malloc(). It is the responsibility of the caller to use -** sqlite3_free() to release the memory. If an OOM condition is encountered, -** NULL is returned. +** Implementation of the scalar function fts3_tokenizer_internal_test(). +** This function is used for testing only, it is not included in the +** build unless SQLITE_TEST is defined. +** +** The purpose of this is to test that the fts3_tokenizer() function +** can be used as designed by the C-code in the queryTokenizer and +** registerTokenizer() functions above. These two functions are repeated +** in the README.tokenizer file as an example, so it is important to +** test them. +** +** To run the tests, evaluate the fts3_tokenizer_internal_test() scalar +** function with no arguments. An assert() will fail if a problem is +** detected. i.e.: +** +** SELECT fts3_tokenizer_internal_test(); ** -** If the second argument is not NULL, then its contents are prepended to -** the returned expression text and then freed using sqlite3_free(). */ -static char *exprToString(Fts3Expr *pExpr, char *zBuf){ - switch( pExpr->eType ){ - case FTSQUERY_PHRASE: { - Fts3Phrase *pPhrase = pExpr->pPhrase; - int i; - zBuf = sqlite3_mprintf( - "%zPHRASE %d 0", zBuf, pPhrase->iColumn); - for(i=0; zBuf && inToken; i++){ - zBuf = sqlite3_mprintf("%z %.*s%s", zBuf, - pPhrase->aToken[i].n, pPhrase->aToken[i].z, - (pPhrase->aToken[i].isPrefix?"+":"") - ); - } - return zBuf; - } +static void intTestFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int rc; + const sqlite3_tokenizer_module *p1; + const sqlite3_tokenizer_module *p2; + sqlite3 *db = (sqlite3 *)sqlite3_user_data(context); - case FTSQUERY_NEAR: - zBuf = sqlite3_mprintf("%zNEAR/%d ", zBuf, pExpr->nNear); - break; - case FTSQUERY_NOT: - zBuf = sqlite3_mprintf("%zNOT ", zBuf); - break; - case FTSQUERY_AND: - zBuf = sqlite3_mprintf("%zAND ", zBuf); - break; - case FTSQUERY_OR: - zBuf = sqlite3_mprintf("%zOR ", zBuf); - break; - } + UNUSED_PARAMETER(argc); + UNUSED_PARAMETER(argv); - if( zBuf ) zBuf = sqlite3_mprintf("%z{", zBuf); - if( zBuf ) zBuf = exprToString(pExpr->pLeft, zBuf); - if( zBuf ) zBuf = sqlite3_mprintf("%z} {", zBuf); + /* Test the query function */ + sqlite3Fts3SimpleTokenizerModule(&p1); + rc = queryTokenizer(db, "simple", &p2); + assert( rc==SQLITE_OK ); + assert( p1==p2 ); + rc = queryTokenizer(db, "nosuchtokenizer", &p2); + assert( rc==SQLITE_ERROR ); + assert( p2==0 ); + assert( 0==strcmp(sqlite3_errmsg(db), "unknown tokenizer: nosuchtokenizer") ); - if( zBuf ) zBuf = exprToString(pExpr->pRight, zBuf); - if( zBuf ) zBuf = sqlite3_mprintf("%z}", zBuf); + /* Test the storage function */ + rc = registerTokenizer(db, "nosuchtokenizer", p1); + assert( rc==SQLITE_OK ); + rc = queryTokenizer(db, "nosuchtokenizer", &p2); + assert( rc==SQLITE_OK ); + assert( p2==p1 ); - return zBuf; + sqlite3_result_text(context, "ok", -1, SQLITE_STATIC); } +#endif + /* -** This is the implementation of a scalar SQL function used to test the -** expression parser. It should be called as follows: +** Set up SQL objects in database db used to access the contents of +** the hash table pointed to by argument pHash. The hash table must +** been initialized to use string keys, and to take a private copy +** of the key when a value is inserted. i.e. by a call similar to: ** -** fts3_exprtest(, , , ...); +** sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); ** -** The first argument, , is the name of the fts3 tokenizer used -** to parse the query expression (see README.tokenizers). The second argument -** is the query expression to parse. Each subsequent argument is the name -** of a column of the fts3 table that the query expression may refer to. -** For example: +** This function adds a scalar function (see header comment above +** scalarFunc() in this file for details) and, if ENABLE_TABLE is +** defined at compilation time, a temporary virtual table (see header +** comment above struct HashTableVtab) to the database schema. Both +** provide read/write access to the contents of *pHash. ** -** SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2'); +** The third argument to this function, zName, is used as the name +** of both the scalar and, if created, the virtual table. */ -static void fts3ExprTest( - sqlite3_context *context, - int argc, - sqlite3_value **argv +SQLITE_PRIVATE int sqlite3Fts3InitHashTable( + sqlite3 *db, + Fts3Hash *pHash, + const char *zName ){ - sqlite3_tokenizer_module const *pModule = 0; - sqlite3_tokenizer *pTokenizer = 0; - int rc; - char **azCol = 0; - const char *zExpr; - int nExpr; - int nCol; - int ii; - Fts3Expr *pExpr; - char *zBuf = 0; - sqlite3 *db = sqlite3_context_db_handle(context); + int rc = SQLITE_OK; + void *p = (void *)pHash; + const int any = SQLITE_ANY; - if( argc<3 ){ - sqlite3_result_error(context, - "Usage: fts3_exprtest(tokenizer, expr, col1, ...", -1 - ); - return; +#ifdef SQLITE_TEST + char *zTest = 0; + char *zTest2 = 0; + void *pdb = (void *)db; + zTest = sqlite3_mprintf("%s_test", zName); + zTest2 = sqlite3_mprintf("%s_internal_test", zName); + if( !zTest || !zTest2 ){ + rc = SQLITE_NOMEM; } +#endif - rc = queryTestTokenizer(db, - (const char *)sqlite3_value_text(argv[0]), &pModule); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; - }else if( !pModule ){ - sqlite3_result_error(context, "No such tokenizer module", -1); - goto exprtest_out; + if( SQLITE_OK==rc ){ + rc = sqlite3_create_function(db, zName, 1, any, p, scalarFunc, 0, 0); } - - rc = pModule->xCreate(0, 0, &pTokenizer); - assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; + if( SQLITE_OK==rc ){ + rc = sqlite3_create_function(db, zName, 2, any, p, scalarFunc, 0, 0); } - pTokenizer->pModule = pModule; - - zExpr = (const char *)sqlite3_value_text(argv[1]); - nExpr = sqlite3_value_bytes(argv[1]); - nCol = argc-2; - azCol = (char **)sqlite3_malloc(nCol*sizeof(char *)); - if( !azCol ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; +#ifdef SQLITE_TEST + if( SQLITE_OK==rc ){ + rc = sqlite3_create_function(db, zTest, -1, any, p, testFunc, 0, 0); } - for(ii=0; ii */ +/* #include */ +/* #include */ +/* #include */ + + +typedef struct simple_tokenizer { + sqlite3_tokenizer base; + char delim[128]; /* flag ASCII delimiters */ +} simple_tokenizer; + +typedef struct simple_tokenizer_cursor { + sqlite3_tokenizer_cursor base; + const char *pInput; /* input we are tokenizing */ + int nBytes; /* size of the input */ + int iOffset; /* current position in pInput */ + int iToken; /* index of next token to be returned */ + char *pToken; /* storage for current token */ + int nTokenAllocated; /* space allocated to zToken buffer */ +} simple_tokenizer_cursor; + + +static int simpleDelim(simple_tokenizer *t, unsigned char c){ + return c<0x80 && t->delim[c]; +} +static int fts3_isalnum(int x){ + return (x>='0' && x<='9') || (x>='A' && x<='Z') || (x>='a' && x<='z'); +} + +/* +** Create a new tokenizer instance. +*/ +static int simpleCreate( + int argc, const char * const *argv, + sqlite3_tokenizer **ppTokenizer +){ + simple_tokenizer *t; + + t = (simple_tokenizer *) sqlite3_malloc(sizeof(*t)); + if( t==NULL ) return SQLITE_NOMEM; + memset(t, 0, sizeof(*t)); + + /* TODO(shess) Delimiters need to remain the same from run to run, + ** else we need to reindex. One solution would be a meta-table to + ** track such information in the database, then we'd only want this + ** information on the initial create. + */ + if( argc>1 ){ + int i, n = (int)strlen(argv[1]); + for(i=0; i=0x80 ){ + sqlite3_free(t); + return SQLITE_ERROR; + } + t->delim[ch] = 1; + } + } else { + /* Mark non-alphanumeric ASCII characters as delimiters */ + int i; + for(i=1; i<0x80; i++){ + t->delim[i] = !fts3_isalnum(i) ? -1 : 0; + } + } + + *ppTokenizer = &t->base; + return SQLITE_OK; +} + +/* +** Destroy a tokenizer +*/ +static int simpleDestroy(sqlite3_tokenizer *pTokenizer){ + sqlite3_free(pTokenizer); + return SQLITE_OK; +} + +/* +** Prepare to begin tokenizing a particular string. The input +** string to be tokenized is pInput[0..nBytes-1]. A cursor +** used to incrementally tokenize this string is returned in +** *ppCursor. +*/ +static int simpleOpen( + sqlite3_tokenizer *pTokenizer, /* The tokenizer */ + const char *pInput, int nBytes, /* String to be tokenized */ + sqlite3_tokenizer_cursor **ppCursor /* OUT: Tokenization cursor */ +){ + simple_tokenizer_cursor *c; + + UNUSED_PARAMETER(pTokenizer); + + c = (simple_tokenizer_cursor *) sqlite3_malloc(sizeof(*c)); + if( c==NULL ) return SQLITE_NOMEM; + + c->pInput = pInput; + if( pInput==0 ){ + c->nBytes = 0; + }else if( nBytes<0 ){ + c->nBytes = (int)strlen(pInput); }else{ - sqlite3_result_text(context, zBuf, -1, SQLITE_TRANSIENT); - sqlite3_free(zBuf); + c->nBytes = nBytes; } + c->iOffset = 0; /* start tokenizing at the beginning */ + c->iToken = 0; + c->pToken = NULL; /* no space allocated, yet. */ + c->nTokenAllocated = 0; - sqlite3Fts3ExprFree(pExpr); + *ppCursor = &c->base; + return SQLITE_OK; +} -exprtest_out: - if( pModule && pTokenizer ){ - rc = pModule->xDestroy(pTokenizer); +/* +** Close a tokenization cursor previously opened by a call to +** simpleOpen() above. +*/ +static int simpleClose(sqlite3_tokenizer_cursor *pCursor){ + simple_tokenizer_cursor *c = (simple_tokenizer_cursor *) pCursor; + sqlite3_free(c->pToken); + sqlite3_free(c); + return SQLITE_OK; +} + +/* +** Extract the next token from a tokenization cursor. The cursor must +** have been opened by a prior call to simpleOpen(). +*/ +static int simpleNext( + sqlite3_tokenizer_cursor *pCursor, /* Cursor returned by simpleOpen */ + const char **ppToken, /* OUT: *ppToken is the token text */ + int *pnBytes, /* OUT: Number of bytes in token */ + int *piStartOffset, /* OUT: Starting offset of token */ + int *piEndOffset, /* OUT: Ending offset of token */ + int *piPosition /* OUT: Position integer of token */ +){ + simple_tokenizer_cursor *c = (simple_tokenizer_cursor *) pCursor; + simple_tokenizer *t = (simple_tokenizer *) pCursor->pTokenizer; + unsigned char *p = (unsigned char *)c->pInput; + + while( c->iOffsetnBytes ){ + int iStartOffset; + + /* Scan past delimiter characters */ + while( c->iOffsetnBytes && simpleDelim(t, p[c->iOffset]) ){ + c->iOffset++; + } + + /* Count non-delimiter characters. */ + iStartOffset = c->iOffset; + while( c->iOffsetnBytes && !simpleDelim(t, p[c->iOffset]) ){ + c->iOffset++; + } + + if( c->iOffset>iStartOffset ){ + int i, n = c->iOffset-iStartOffset; + if( n>c->nTokenAllocated ){ + char *pNew; + c->nTokenAllocated = n+20; + pNew = sqlite3_realloc(c->pToken, c->nTokenAllocated); + if( !pNew ) return SQLITE_NOMEM; + c->pToken = pNew; + } + for(i=0; ipToken[i] = (char)((ch>='A' && ch<='Z') ? ch-'A'+'a' : ch); + } + *ppToken = c->pToken; + *pnBytes = n; + *piStartOffset = iStartOffset; + *piEndOffset = c->iOffset; + *piPosition = c->iToken++; + + return SQLITE_OK; + } } - sqlite3_free(azCol); + return SQLITE_DONE; } /* -** Register the query expression parser test function fts3_exprtest() -** with database connection db. +** The set of routines that implement the simple tokenizer */ -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3* db){ - return sqlite3_create_function( - db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0 - ); +static const sqlite3_tokenizer_module simpleTokenizerModule = { + 0, + simpleCreate, + simpleDestroy, + simpleOpen, + simpleClose, + simpleNext, + 0, +}; + +/* +** Allocate a new simple tokenizer. Return a pointer to the new +** tokenizer in *ppModule +*/ +SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule( + sqlite3_tokenizer_module const**ppModule +){ + *ppModule = &simpleTokenizerModule; } -#endif #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ -/************** End of fts3_expr.c *******************************************/ -/************** Begin file fts3_hash.c ***************************************/ +/************** End of fts3_tokenizer1.c *************************************/ +/************** Begin file fts3_tokenize_vtab.c ******************************/ /* -** 2001 September 22 +** 2013 Apr 22 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -117880,379 +139076,454 @@ SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3* db){ ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** -************************************************************************* -** This is the implementation of generic hash-tables used in SQLite. -** We've modified it slightly to serve as a standalone hash table -** implementation for the full-text indexing module. -*/ - -/* -** The code in this file is only compiled if: +****************************************************************************** ** -** * The FTS3 module is being built as an extension -** (in which case SQLITE_CORE is not defined), or +** This file contains code for the "fts3tokenize" virtual table module. +** An fts3tokenize virtual table is created as follows: +** +** CREATE VIRTUAL TABLE USING fts3tokenize( +** , , ... +** ); +** +** The table created has the following schema: +** +** CREATE TABLE (input, token, start, end, position) +** +** When queried, the query must include a WHERE clause of type: +** +** input = +** +** The virtual table module tokenizes this , using the FTS3 +** tokenizer specified by the arguments to the CREATE VIRTUAL TABLE +** statement and returns one row for each token in the result. With +** fields set as follows: +** +** input: Always set to a copy of +** token: A token from the input. +** start: Byte offset of the token within the input . +** end: Byte offset of the byte immediately following the end of the +** token within the input string. +** pos: Token offset of token within input. ** -** * The FTS3 module is being built into the core of -** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). */ #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) +/* #include */ +/* #include */ +typedef struct Fts3tokTable Fts3tokTable; +typedef struct Fts3tokCursor Fts3tokCursor; /* -** Malloc and Free functions +** Virtual table structure. */ -static void *fts3HashMalloc(int n){ - void *p = sqlite3_malloc(n); - if( p ){ - memset(p, 0, n); +struct Fts3tokTable { + sqlite3_vtab base; /* Base class used by SQLite core */ + const sqlite3_tokenizer_module *pMod; + sqlite3_tokenizer *pTok; +}; + +/* +** Virtual table cursor structure. +*/ +struct Fts3tokCursor { + sqlite3_vtab_cursor base; /* Base class used by SQLite core */ + char *zInput; /* Input string */ + sqlite3_tokenizer_cursor *pCsr; /* Cursor to iterate through zInput */ + int iRowid; /* Current 'rowid' value */ + const char *zToken; /* Current 'token' value */ + int nToken; /* Size of zToken in bytes */ + int iStart; /* Current 'start' value */ + int iEnd; /* Current 'end' value */ + int iPos; /* Current 'pos' value */ +}; + +/* +** Query FTS for the tokenizer implementation named zName. +*/ +static int fts3tokQueryTokenizer( + Fts3Hash *pHash, + const char *zName, + const sqlite3_tokenizer_module **pp, + char **pzErr +){ + sqlite3_tokenizer_module *p; + int nName = (int)strlen(zName); + + p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1); + if( !p ){ + *pzErr = sqlite3_mprintf("unknown tokenizer: %s", zName); + return SQLITE_ERROR; } - return p; -} -static void fts3HashFree(void *p){ - sqlite3_free(p); + + *pp = p; + return SQLITE_OK; } -/* Turn bulk memory into a hash table object by initializing the -** fields of the Hash structure. +/* +** The second argument, argv[], is an array of pointers to nul-terminated +** strings. This function makes a copy of the array and strings into a +** single block of memory. It then dequotes any of the strings that appear +** to be quoted. ** -** "pNew" is a pointer to the hash table that is to be initialized. -** keyClass is one of the constants -** FTS3_HASH_BINARY or FTS3_HASH_STRING. The value of keyClass -** determines what kind of key the hash table will use. "copyKey" is -** true if the hash table should make its own private copy of keys and -** false if it should just use the supplied pointer. +** If successful, output parameter *pazDequote is set to point at the +** array of dequoted strings and SQLITE_OK is returned. The caller is +** responsible for eventually calling sqlite3_free() to free the array +** in this case. Or, if an error occurs, an SQLite error code is returned. +** The final value of *pazDequote is undefined in this case. */ -SQLITE_PRIVATE void sqlite3Fts3HashInit(Fts3Hash *pNew, char keyClass, char copyKey){ - assert( pNew!=0 ); - assert( keyClass>=FTS3_HASH_STRING && keyClass<=FTS3_HASH_BINARY ); - pNew->keyClass = keyClass; - pNew->copyKey = copyKey; - pNew->first = 0; - pNew->count = 0; - pNew->htsize = 0; - pNew->ht = 0; -} +static int fts3tokDequoteArray( + int argc, /* Number of elements in argv[] */ + const char * const *argv, /* Input array */ + char ***pazDequote /* Output array */ +){ + int rc = SQLITE_OK; /* Return code */ + if( argc==0 ){ + *pazDequote = 0; + }else{ + int i; + int nByte = 0; + char **azDequote; -/* Remove all entries from a hash table. Reclaim all memory. -** Call this routine to delete a hash table or to reset a hash table -** to the empty state. -*/ -SQLITE_PRIVATE void sqlite3Fts3HashClear(Fts3Hash *pH){ - Fts3HashElem *elem; /* For looping over all elements of the table */ + for(i=0; ifirst; - pH->first = 0; - fts3HashFree(pH->ht); - pH->ht = 0; - pH->htsize = 0; - while( elem ){ - Fts3HashElem *next_elem = elem->next; - if( pH->copyKey && elem->pKey ){ - fts3HashFree(elem->pKey); + *pazDequote = azDequote = sqlite3_malloc(sizeof(char *)*argc + nByte); + if( azDequote==0 ){ + rc = SQLITE_NOMEM; + }else{ + char *pSpace = (char *)&azDequote[argc]; + for(i=0; icount = 0; + + return rc; } /* -** Hash and comparison functions when the mode is FTS3_HASH_STRING +** Schema of the tokenizer table. */ -static int fts3StrHash(const void *pKey, int nKey){ - const char *z = (const char *)pKey; - int h = 0; - if( nKey<=0 ) nKey = (int) strlen(z); - while( nKey > 0 ){ - h = (h<<3) ^ h ^ *z++; - nKey--; - } - return h & 0x7fffffff; -} -static int fts3StrCompare(const void *pKey1, int n1, const void *pKey2, int n2){ - if( n1!=n2 ) return 1; - return strncmp((const char*)pKey1,(const char*)pKey2,n1); -} +#define FTS3_TOK_SCHEMA "CREATE TABLE x(input, token, start, end, position)" /* -** Hash and comparison functions when the mode is FTS3_HASH_BINARY +** This function does all the work for both the xConnect and xCreate methods. +** These tables have no persistent representation of their own, so xConnect +** and xCreate are identical operations. +** +** argv[0]: module name +** argv[1]: database name +** argv[2]: table name +** argv[3]: first argument (tokenizer name) */ -static int fts3BinHash(const void *pKey, int nKey){ - int h = 0; - const char *z = (const char *)pKey; - while( nKey-- > 0 ){ - h = (h<<3) ^ h ^ *(z++); +static int fts3tokConnectMethod( + sqlite3 *db, /* Database connection */ + void *pHash, /* Hash table of tokenizers */ + int argc, /* Number of elements in argv array */ + const char * const *argv, /* xCreate/xConnect argument array */ + sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ + char **pzErr /* OUT: sqlite3_malloc'd error message */ +){ + Fts3tokTable *pTab; + const sqlite3_tokenizer_module *pMod = 0; + sqlite3_tokenizer *pTok = 0; + int rc; + char **azDequote = 0; + int nDequote; + + rc = sqlite3_declare_vtab(db, FTS3_TOK_SCHEMA); + if( rc!=SQLITE_OK ) return rc; + + nDequote = argc-3; + rc = fts3tokDequoteArray(nDequote, &argv[3], &azDequote); + + if( rc==SQLITE_OK ){ + const char *zModule; + if( nDequote<1 ){ + zModule = "simple"; + }else{ + zModule = azDequote[0]; + } + rc = fts3tokQueryTokenizer((Fts3Hash*)pHash, zModule, &pMod, pzErr); } - return h & 0x7fffffff; + + assert( (rc==SQLITE_OK)==(pMod!=0) ); + if( rc==SQLITE_OK ){ + const char * const *azArg = (const char * const *)&azDequote[1]; + rc = pMod->xCreate((nDequote>1 ? nDequote-1 : 0), azArg, &pTok); + } + + if( rc==SQLITE_OK ){ + pTab = (Fts3tokTable *)sqlite3_malloc(sizeof(Fts3tokTable)); + if( pTab==0 ){ + rc = SQLITE_NOMEM; + } + } + + if( rc==SQLITE_OK ){ + memset(pTab, 0, sizeof(Fts3tokTable)); + pTab->pMod = pMod; + pTab->pTok = pTok; + *ppVtab = &pTab->base; + }else{ + if( pTok ){ + pMod->xDestroy(pTok); + } + } + + sqlite3_free(azDequote); + return rc; } -static int fts3BinCompare(const void *pKey1, int n1, const void *pKey2, int n2){ - if( n1!=n2 ) return 1; - return memcmp(pKey1,pKey2,n1); + +/* +** This function does the work for both the xDisconnect and xDestroy methods. +** These tables have no persistent representation of their own, so xDisconnect +** and xDestroy are identical operations. +*/ +static int fts3tokDisconnectMethod(sqlite3_vtab *pVtab){ + Fts3tokTable *pTab = (Fts3tokTable *)pVtab; + + pTab->pMod->xDestroy(pTab->pTok); + sqlite3_free(pTab); + return SQLITE_OK; } /* -** Return a pointer to the appropriate hash function given the key class. -** -** The C syntax in this function definition may be unfamilar to some -** programmers, so we provide the following additional explanation: -** -** The name of the function is "ftsHashFunction". The function takes a -** single parameter "keyClass". The return value of ftsHashFunction() -** is a pointer to another function. Specifically, the return value -** of ftsHashFunction() is a pointer to a function that takes two parameters -** with types "const void*" and "int" and returns an "int". +** xBestIndex - Analyze a WHERE and ORDER BY clause. */ -static int (*ftsHashFunction(int keyClass))(const void*,int){ - if( keyClass==FTS3_HASH_STRING ){ - return &fts3StrHash; - }else{ - assert( keyClass==FTS3_HASH_BINARY ); - return &fts3BinHash; +static int fts3tokBestIndexMethod( + sqlite3_vtab *pVTab, + sqlite3_index_info *pInfo +){ + int i; + UNUSED_PARAMETER(pVTab); + + for(i=0; inConstraint; i++){ + if( pInfo->aConstraint[i].usable + && pInfo->aConstraint[i].iColumn==0 + && pInfo->aConstraint[i].op==SQLITE_INDEX_CONSTRAINT_EQ + ){ + pInfo->idxNum = 1; + pInfo->aConstraintUsage[i].argvIndex = 1; + pInfo->aConstraintUsage[i].omit = 1; + pInfo->estimatedCost = 1; + return SQLITE_OK; + } } + + pInfo->idxNum = 0; + assert( pInfo->estimatedCost>1000000.0 ); + + return SQLITE_OK; } /* -** Return a pointer to the appropriate hash function given the key class. -** -** For help in interpreted the obscure C code in the function definition, -** see the header comment on the previous function. +** xOpen - Open a cursor. */ -static int (*ftsCompareFunction(int keyClass))(const void*,int,const void*,int){ - if( keyClass==FTS3_HASH_STRING ){ - return &fts3StrCompare; - }else{ - assert( keyClass==FTS3_HASH_BINARY ); - return &fts3BinCompare; +static int fts3tokOpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){ + Fts3tokCursor *pCsr; + UNUSED_PARAMETER(pVTab); + + pCsr = (Fts3tokCursor *)sqlite3_malloc(sizeof(Fts3tokCursor)); + if( pCsr==0 ){ + return SQLITE_NOMEM; } + memset(pCsr, 0, sizeof(Fts3tokCursor)); + + *ppCsr = (sqlite3_vtab_cursor *)pCsr; + return SQLITE_OK; } -/* Link an element into the hash table +/* +** Reset the tokenizer cursor passed as the only argument. As if it had +** just been returned by fts3tokOpenMethod(). */ -static void fts3HashInsertElement( - Fts3Hash *pH, /* The complete hash table */ - struct _fts3ht *pEntry, /* The entry into which pNew is inserted */ - Fts3HashElem *pNew /* The element to be inserted */ -){ - Fts3HashElem *pHead; /* First element already in pEntry */ - pHead = pEntry->chain; - if( pHead ){ - pNew->next = pHead; - pNew->prev = pHead->prev; - if( pHead->prev ){ pHead->prev->next = pNew; } - else { pH->first = pNew; } - pHead->prev = pNew; - }else{ - pNew->next = pH->first; - if( pH->first ){ pH->first->prev = pNew; } - pNew->prev = 0; - pH->first = pNew; +static void fts3tokResetCursor(Fts3tokCursor *pCsr){ + if( pCsr->pCsr ){ + Fts3tokTable *pTab = (Fts3tokTable *)(pCsr->base.pVtab); + pTab->pMod->xClose(pCsr->pCsr); + pCsr->pCsr = 0; } - pEntry->count++; - pEntry->chain = pNew; + sqlite3_free(pCsr->zInput); + pCsr->zInput = 0; + pCsr->zToken = 0; + pCsr->nToken = 0; + pCsr->iStart = 0; + pCsr->iEnd = 0; + pCsr->iPos = 0; + pCsr->iRowid = 0; } +/* +** xClose - Close a cursor. +*/ +static int fts3tokCloseMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; -/* Resize the hash table so that it cantains "new_size" buckets. -** "new_size" must be a power of 2. The hash table might fail -** to resize if sqliteMalloc() fails. -** -** Return non-zero if a memory allocation error occurs. + fts3tokResetCursor(pCsr); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** xNext - Advance the cursor to the next row, if any. */ -static int fts3Rehash(Fts3Hash *pH, int new_size){ - struct _fts3ht *new_ht; /* The new hash table */ - Fts3HashElem *elem, *next_elem; /* For looping over existing elements */ - int (*xHash)(const void*,int); /* The hash function */ +static int fts3tokNextMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + Fts3tokTable *pTab = (Fts3tokTable *)(pCursor->pVtab); + int rc; /* Return code */ - assert( (new_size & (new_size-1))==0 ); - new_ht = (struct _fts3ht *)fts3HashMalloc( new_size*sizeof(struct _fts3ht) ); - if( new_ht==0 ) return 1; - fts3HashFree(pH->ht); - pH->ht = new_ht; - pH->htsize = new_size; - xHash = ftsHashFunction(pH->keyClass); - for(elem=pH->first, pH->first=0; elem; elem = next_elem){ - int h = (*xHash)(elem->pKey, elem->nKey) & (new_size-1); - next_elem = elem->next; - fts3HashInsertElement(pH, &new_ht[h], elem); + pCsr->iRowid++; + rc = pTab->pMod->xNext(pCsr->pCsr, + &pCsr->zToken, &pCsr->nToken, + &pCsr->iStart, &pCsr->iEnd, &pCsr->iPos + ); + + if( rc!=SQLITE_OK ){ + fts3tokResetCursor(pCsr); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - return 0; + + return rc; } -/* This function (for internal use only) locates an element in an -** hash table that matches the given key. The hash for this key has -** already been computed and is passed as the 4th parameter. +/* +** xFilter - Initialize a cursor to point at the start of its data. */ -static Fts3HashElem *fts3FindElementByHash( - const Fts3Hash *pH, /* The pH to be searched */ - const void *pKey, /* The key we are searching for */ - int nKey, - int h /* The hash for this key. */ +static int fts3tokFilterMethod( + sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */ + int idxNum, /* Strategy index */ + const char *idxStr, /* Unused */ + int nVal, /* Number of elements in apVal */ + sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ - Fts3HashElem *elem; /* Used to loop thru the element list */ - int count; /* Number of elements left to test */ - int (*xCompare)(const void*,int,const void*,int); /* comparison function */ + int rc = SQLITE_ERROR; + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + Fts3tokTable *pTab = (Fts3tokTable *)(pCursor->pVtab); + UNUSED_PARAMETER(idxStr); + UNUSED_PARAMETER(nVal); - if( pH->ht ){ - struct _fts3ht *pEntry = &pH->ht[h]; - elem = pEntry->chain; - count = pEntry->count; - xCompare = ftsCompareFunction(pH->keyClass); - while( count-- && elem ){ - if( (*xCompare)(elem->pKey,elem->nKey,pKey,nKey)==0 ){ - return elem; + fts3tokResetCursor(pCsr); + if( idxNum==1 ){ + const char *zByte = (const char *)sqlite3_value_text(apVal[0]); + int nByte = sqlite3_value_bytes(apVal[0]); + pCsr->zInput = sqlite3_malloc(nByte+1); + if( pCsr->zInput==0 ){ + rc = SQLITE_NOMEM; + }else{ + memcpy(pCsr->zInput, zByte, nByte); + pCsr->zInput[nByte] = 0; + rc = pTab->pMod->xOpen(pTab->pTok, pCsr->zInput, nByte, &pCsr->pCsr); + if( rc==SQLITE_OK ){ + pCsr->pCsr->pTokenizer = pTab->pTok; } - elem = elem->next; } } - return 0; + + if( rc!=SQLITE_OK ) return rc; + return fts3tokNextMethod(pCursor); } -/* Remove a single entry from the hash table given a pointer to that -** element and a hash on the element's key. +/* +** xEof - Return true if the cursor is at EOF, or false otherwise. */ -static void fts3RemoveElementByHash( - Fts3Hash *pH, /* The pH containing "elem" */ - Fts3HashElem* elem, /* The element to be removed from the pH */ - int h /* Hash value for the element */ -){ - struct _fts3ht *pEntry; - if( elem->prev ){ - elem->prev->next = elem->next; - }else{ - pH->first = elem->next; - } - if( elem->next ){ - elem->next->prev = elem->prev; - } - pEntry = &pH->ht[h]; - if( pEntry->chain==elem ){ - pEntry->chain = elem->next; - } - pEntry->count--; - if( pEntry->count<=0 ){ - pEntry->chain = 0; - } - if( pH->copyKey && elem->pKey ){ - fts3HashFree(elem->pKey); - } - fts3HashFree( elem ); - pH->count--; - if( pH->count<=0 ){ - assert( pH->first==0 ); - assert( pH->count==0 ); - fts3HashClear(pH); - } +static int fts3tokEofMethod(sqlite3_vtab_cursor *pCursor){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + return (pCsr->zToken==0); } -SQLITE_PRIVATE Fts3HashElem *sqlite3Fts3HashFindElem( - const Fts3Hash *pH, - const void *pKey, - int nKey +/* +** xColumn - Return a column value. +*/ +static int fts3tokColumnMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite3_context *pCtx, /* Context for sqlite3_result_xxx() calls */ + int iCol /* Index of column to read value from */ ){ - int h; /* A hash on key */ - int (*xHash)(const void*,int); /* The hash function */ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; - if( pH==0 || pH->ht==0 ) return 0; - xHash = ftsHashFunction(pH->keyClass); - assert( xHash!=0 ); - h = (*xHash)(pKey,nKey); - assert( (pH->htsize & (pH->htsize-1))==0 ); - return fts3FindElementByHash(pH,pKey,nKey, h & (pH->htsize-1)); + /* CREATE TABLE x(input, token, start, end, position) */ + switch( iCol ){ + case 0: + sqlite3_result_text(pCtx, pCsr->zInput, -1, SQLITE_TRANSIENT); + break; + case 1: + sqlite3_result_text(pCtx, pCsr->zToken, pCsr->nToken, SQLITE_TRANSIENT); + break; + case 2: + sqlite3_result_int(pCtx, pCsr->iStart); + break; + case 3: + sqlite3_result_int(pCtx, pCsr->iEnd); + break; + default: + assert( iCol==4 ); + sqlite3_result_int(pCtx, pCsr->iPos); + break; + } + return SQLITE_OK; } -/* -** Attempt to locate an element of the hash table pH with a key -** that matches pKey,nKey. Return the data for this element if it is -** found, or NULL if there is no match. +/* +** xRowid - Return the current rowid for the cursor. */ -SQLITE_PRIVATE void *sqlite3Fts3HashFind(const Fts3Hash *pH, const void *pKey, int nKey){ - Fts3HashElem *pElem; /* The element that matches key (if any) */ - - pElem = sqlite3Fts3HashFindElem(pH, pKey, nKey); - return pElem ? pElem->data : 0; +static int fts3tokRowidMethod( + sqlite3_vtab_cursor *pCursor, /* Cursor to retrieve value from */ + sqlite_int64 *pRowid /* OUT: Rowid value */ +){ + Fts3tokCursor *pCsr = (Fts3tokCursor *)pCursor; + *pRowid = (sqlite3_int64)pCsr->iRowid; + return SQLITE_OK; } -/* Insert an element into the hash table pH. The key is pKey,nKey -** and the data is "data". -** -** If no element exists with a matching key, then a new -** element is created. A copy of the key is made if the copyKey -** flag is set. NULL is returned. -** -** If another element already exists with the same key, then the -** new data replaces the old data and the old data is returned. -** The key is not copied in this instance. If a malloc fails, then -** the new data is returned and the hash table is unchanged. -** -** If the "data" parameter to this function is NULL, then the -** element corresponding to "key" is removed from the hash table. +/* +** Register the fts3tok module with database connection db. Return SQLITE_OK +** if successful or an error code if sqlite3_create_module() fails. */ -SQLITE_PRIVATE void *sqlite3Fts3HashInsert( - Fts3Hash *pH, /* The hash table to insert into */ - const void *pKey, /* The key */ - int nKey, /* Number of bytes in the key */ - void *data /* The data */ -){ - int hraw; /* Raw hash value of the key */ - int h; /* the hash of the key modulo hash table size */ - Fts3HashElem *elem; /* Used to loop thru the element list */ - Fts3HashElem *new_elem; /* New element added to the pH */ - int (*xHash)(const void*,int); /* The hash function */ +SQLITE_PRIVATE int sqlite3Fts3InitTok(sqlite3 *db, Fts3Hash *pHash){ + static const sqlite3_module fts3tok_module = { + 0, /* iVersion */ + fts3tokConnectMethod, /* xCreate */ + fts3tokConnectMethod, /* xConnect */ + fts3tokBestIndexMethod, /* xBestIndex */ + fts3tokDisconnectMethod, /* xDisconnect */ + fts3tokDisconnectMethod, /* xDestroy */ + fts3tokOpenMethod, /* xOpen */ + fts3tokCloseMethod, /* xClose */ + fts3tokFilterMethod, /* xFilter */ + fts3tokNextMethod, /* xNext */ + fts3tokEofMethod, /* xEof */ + fts3tokColumnMethod, /* xColumn */ + fts3tokRowidMethod, /* xRowid */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindFunction */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ + }; + int rc; /* Return code */ - assert( pH!=0 ); - xHash = ftsHashFunction(pH->keyClass); - assert( xHash!=0 ); - hraw = (*xHash)(pKey, nKey); - assert( (pH->htsize & (pH->htsize-1))==0 ); - h = hraw & (pH->htsize-1); - elem = fts3FindElementByHash(pH,pKey,nKey,h); - if( elem ){ - void *old_data = elem->data; - if( data==0 ){ - fts3RemoveElementByHash(pH,elem,h); - }else{ - elem->data = data; - } - return old_data; - } - if( data==0 ) return 0; - if( (pH->htsize==0 && fts3Rehash(pH,8)) - || (pH->count>=pH->htsize && fts3Rehash(pH, pH->htsize*2)) - ){ - pH->count = 0; - return data; - } - assert( pH->htsize>0 ); - new_elem = (Fts3HashElem*)fts3HashMalloc( sizeof(Fts3HashElem) ); - if( new_elem==0 ) return data; - if( pH->copyKey && pKey!=0 ){ - new_elem->pKey = fts3HashMalloc( nKey ); - if( new_elem->pKey==0 ){ - fts3HashFree(new_elem); - return data; - } - memcpy((void*)new_elem->pKey, pKey, nKey); - }else{ - new_elem->pKey = (void*)pKey; - } - new_elem->nKey = nKey; - pH->count++; - assert( pH->htsize>0 ); - assert( (pH->htsize & (pH->htsize-1))==0 ); - h = hraw & (pH->htsize-1); - fts3HashInsertElement(pH, &pH->ht[h], new_elem); - new_elem->data = data; - return 0; + rc = sqlite3_create_module(db, "fts3tokenize", &fts3tok_module, (void*)pHash); + return rc; } #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ -/************** End of fts3_hash.c *******************************************/ -/************** Begin file fts3_porter.c *************************************/ +/************** End of fts3_tokenize_vtab.c **********************************/ +/************** Begin file fts3_write.c **************************************/ /* -** 2006 September 30 +** 2009 Oct 23 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -118261,3351 +139532,3950 @@ SQLITE_PRIVATE void *sqlite3Fts3HashInsert( ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** -************************************************************************* -** Implementation of the full-text-search tokenizer that implements -** a Porter stemmer. +****************************************************************************** +** +** This file is part of the SQLite FTS3 extension module. Specifically, +** this file contains code to insert, update and delete rows from FTS3 +** tables. It also contains code to merge FTS3 b-tree segments. Some +** of the sub-routines used to merge segments are also used by the query +** code in fts3.c. +*/ + +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + +/* #include */ +/* #include */ +/* #include */ + + +#define FTS_MAX_APPENDABLE_HEIGHT 16 + +/* +** When full-text index nodes are loaded from disk, the buffer that they +** are loaded into has the following number of bytes of padding at the end +** of it. i.e. if a full-text index node is 900 bytes in size, then a buffer +** of 920 bytes is allocated for it. +** +** This means that if we have a pointer into a buffer containing node data, +** it is always safe to read up to two varints from it without risking an +** overread, even if the node data is corrupted. */ +#define FTS3_NODE_PADDING (FTS3_VARINT_MAX*2) /* -** The code in this file is only compiled if: +** Under certain circumstances, b-tree nodes (doclists) can be loaded into +** memory incrementally instead of all at once. This can be a big performance +** win (reduced IO and CPU) if SQLite stops calling the virtual table xNext() +** method before retrieving all query results (as may happen, for example, +** if a query has a LIMIT clause). ** -** * The FTS3 module is being built as an extension -** (in which case SQLITE_CORE is not defined), or +** Incremental loading is used for b-tree nodes FTS3_NODE_CHUNK_THRESHOLD +** bytes and larger. Nodes are loaded in chunks of FTS3_NODE_CHUNKSIZE bytes. +** The code is written so that the hard lower-limit for each of these values +** is 1. Clearly such small values would be inefficient, but can be useful +** for testing purposes. ** -** * The FTS3 module is being built into the core of -** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). +** If this module is built with SQLITE_TEST defined, these constants may +** be overridden at runtime for testing purposes. File fts3_test.c contains +** a Tcl interface to read and write the values. */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - - +#ifdef SQLITE_TEST +int test_fts3_node_chunksize = (4*1024); +int test_fts3_node_chunk_threshold = (4*1024)*4; +# define FTS3_NODE_CHUNKSIZE test_fts3_node_chunksize +# define FTS3_NODE_CHUNK_THRESHOLD test_fts3_node_chunk_threshold +#else +# define FTS3_NODE_CHUNKSIZE (4*1024) +# define FTS3_NODE_CHUNK_THRESHOLD (FTS3_NODE_CHUNKSIZE*4) +#endif /* -** Class derived from sqlite3_tokenizer +** The two values that may be meaningfully bound to the :1 parameter in +** statements SQL_REPLACE_STAT and SQL_SELECT_STAT. */ -typedef struct porter_tokenizer { - sqlite3_tokenizer base; /* Base class */ -} porter_tokenizer; +#define FTS_STAT_DOCTOTAL 0 +#define FTS_STAT_INCRMERGEHINT 1 +#define FTS_STAT_AUTOINCRMERGE 2 /* -** Class derived from sqlit3_tokenizer_cursor +** If FTS_LOG_MERGES is defined, call sqlite3_log() to report each automatic +** and incremental merge operation that takes place. This is used for +** debugging FTS only, it should not usually be turned on in production +** systems. */ -typedef struct porter_tokenizer_cursor { - sqlite3_tokenizer_cursor base; - const char *zInput; /* input we are tokenizing */ - int nInput; /* size of the input */ - int iOffset; /* current position in zInput */ - int iToken; /* index of next token to be returned */ - char *zToken; /* storage for current token */ - int nAllocated; /* space allocated to zToken buffer */ -} porter_tokenizer_cursor; +#ifdef FTS3_LOG_MERGES +static void fts3LogMerge(int nMerge, sqlite3_int64 iAbsLevel){ + sqlite3_log(SQLITE_OK, "%d-way merge from level %d", nMerge, (int)iAbsLevel); +} +#else +#define fts3LogMerge(x, y) +#endif +typedef struct PendingList PendingList; +typedef struct SegmentNode SegmentNode; +typedef struct SegmentWriter SegmentWriter; + /* -** Create a new tokenizer instance. +** An instance of the following data structure is used to build doclists +** incrementally. See function fts3PendingListAppend() for details. */ -static int porterCreate( - int argc, const char * const *argv, - sqlite3_tokenizer **ppTokenizer -){ - porter_tokenizer *t; - - UNUSED_PARAMETER(argc); - UNUSED_PARAMETER(argv); +struct PendingList { + int nData; + char *aData; + int nSpace; + sqlite3_int64 iLastDocid; + sqlite3_int64 iLastCol; + sqlite3_int64 iLastPos; +}; - t = (porter_tokenizer *) sqlite3_malloc(sizeof(*t)); - if( t==NULL ) return SQLITE_NOMEM; - memset(t, 0, sizeof(*t)); - *ppTokenizer = &t->base; - return SQLITE_OK; -} /* -** Destroy a tokenizer +** Each cursor has a (possibly empty) linked list of the following objects. */ -static int porterDestroy(sqlite3_tokenizer *pTokenizer){ - sqlite3_free(pTokenizer); - return SQLITE_OK; -} +struct Fts3DeferredToken { + Fts3PhraseToken *pToken; /* Pointer to corresponding expr token */ + int iCol; /* Column token must occur in */ + Fts3DeferredToken *pNext; /* Next in list of deferred tokens */ + PendingList *pList; /* Doclist is assembled here */ +}; /* -** Prepare to begin tokenizing a particular string. The input -** string to be tokenized is zInput[0..nInput-1]. A cursor -** used to incrementally tokenize this string is returned in -** *ppCursor. +** An instance of this structure is used to iterate through the terms on +** a contiguous set of segment b-tree leaf nodes. Although the details of +** this structure are only manipulated by code in this file, opaque handles +** of type Fts3SegReader* are also used by code in fts3.c to iterate through +** terms when querying the full-text index. See functions: +** +** sqlite3Fts3SegReaderNew() +** sqlite3Fts3SegReaderFree() +** sqlite3Fts3SegReaderIterate() +** +** Methods used to manipulate Fts3SegReader structures: +** +** fts3SegReaderNext() +** fts3SegReaderFirstDocid() +** fts3SegReaderNextDocid() */ -static int porterOpen( - sqlite3_tokenizer *pTokenizer, /* The tokenizer */ - const char *zInput, int nInput, /* String to be tokenized */ - sqlite3_tokenizer_cursor **ppCursor /* OUT: Tokenization cursor */ -){ - porter_tokenizer_cursor *c; +struct Fts3SegReader { + int iIdx; /* Index within level, or 0x7FFFFFFF for PT */ + u8 bLookup; /* True for a lookup only */ + u8 rootOnly; /* True for a root-only reader */ - UNUSED_PARAMETER(pTokenizer); + sqlite3_int64 iStartBlock; /* Rowid of first leaf block to traverse */ + sqlite3_int64 iLeafEndBlock; /* Rowid of final leaf block to traverse */ + sqlite3_int64 iEndBlock; /* Rowid of final block in segment (or 0) */ + sqlite3_int64 iCurrentBlock; /* Current leaf block (or 0) */ - c = (porter_tokenizer_cursor *) sqlite3_malloc(sizeof(*c)); - if( c==NULL ) return SQLITE_NOMEM; + char *aNode; /* Pointer to node data (or NULL) */ + int nNode; /* Size of buffer at aNode (or 0) */ + int nPopulate; /* If >0, bytes of buffer aNode[] loaded */ + sqlite3_blob *pBlob; /* If not NULL, blob handle to read node */ - c->zInput = zInput; - if( zInput==0 ){ - c->nInput = 0; - }else if( nInput<0 ){ - c->nInput = (int)strlen(zInput); - }else{ - c->nInput = nInput; - } - c->iOffset = 0; /* start tokenizing at the beginning */ - c->iToken = 0; - c->zToken = NULL; /* no space allocated, yet. */ - c->nAllocated = 0; + Fts3HashElem **ppNextElem; - *ppCursor = &c->base; - return SQLITE_OK; -} + /* Variables set by fts3SegReaderNext(). These may be read directly + ** by the caller. They are valid from the time SegmentReaderNew() returns + ** until SegmentReaderNext() returns something other than SQLITE_OK + ** (i.e. SQLITE_DONE). + */ + int nTerm; /* Number of bytes in current term */ + char *zTerm; /* Pointer to current term */ + int nTermAlloc; /* Allocated size of zTerm buffer */ + char *aDoclist; /* Pointer to doclist of current entry */ + int nDoclist; /* Size of doclist in current entry */ + + /* The following variables are used by fts3SegReaderNextDocid() to iterate + ** through the current doclist (aDoclist/nDoclist). + */ + char *pOffsetList; + int nOffsetList; /* For descending pending seg-readers only */ + sqlite3_int64 iDocid; +}; + +#define fts3SegReaderIsPending(p) ((p)->ppNextElem!=0) +#define fts3SegReaderIsRootOnly(p) ((p)->rootOnly!=0) /* -** Close a tokenization cursor previously opened by a call to -** porterOpen() above. -*/ -static int porterClose(sqlite3_tokenizer_cursor *pCursor){ - porter_tokenizer_cursor *c = (porter_tokenizer_cursor *) pCursor; - sqlite3_free(c->zToken); - sqlite3_free(c); - return SQLITE_OK; -} -/* -** Vowel or consonant +** An instance of this structure is used to create a segment b-tree in the +** database. The internal details of this type are only accessed by the +** following functions: +** +** fts3SegWriterAdd() +** fts3SegWriterFlush() +** fts3SegWriterFree() */ -static const char cType[] = { - 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 0, - 1, 1, 1, 2, 1 +struct SegmentWriter { + SegmentNode *pTree; /* Pointer to interior tree structure */ + sqlite3_int64 iFirst; /* First slot in %_segments written */ + sqlite3_int64 iFree; /* Next free slot in %_segments */ + char *zTerm; /* Pointer to previous term buffer */ + int nTerm; /* Number of bytes in zTerm */ + int nMalloc; /* Size of malloc'd buffer at zMalloc */ + char *zMalloc; /* Malloc'd space (possibly) used for zTerm */ + int nSize; /* Size of allocation at aData */ + int nData; /* Bytes of data in aData */ + char *aData; /* Pointer to block from malloc() */ + i64 nLeafData; /* Number of bytes of leaf data written */ }; /* -** isConsonant() and isVowel() determine if their first character in -** the string they point to is a consonant or a vowel, according -** to Porter ruls. +** Type SegmentNode is used by the following three functions to create +** the interior part of the segment b+-tree structures (everything except +** the leaf nodes). These functions and type are only ever used by code +** within the fts3SegWriterXXX() family of functions described above. ** -** A consonate is any letter other than 'a', 'e', 'i', 'o', or 'u'. -** 'Y' is a consonant unless it follows another consonant, -** in which case it is a vowel. +** fts3NodeAddTerm() +** fts3NodeWrite() +** fts3NodeFree() ** -** In these routine, the letters are in reverse order. So the 'y' rule -** is that 'y' is a consonant unless it is followed by another -** consonent. +** When a b+tree is written to the database (either as a result of a merge +** or the pending-terms table being flushed), leaves are written into the +** database file as soon as they are completely populated. The interior of +** the tree is assembled in memory and written out only once all leaves have +** been populated and stored. This is Ok, as the b+-tree fanout is usually +** very large, meaning that the interior of the tree consumes relatively +** little memory. */ -static int isVowel(const char*); -static int isConsonant(const char *z){ - int j; - char x = *z; - if( x==0 ) return 0; - assert( x>='a' && x<='z' ); - j = cType[x-'a']; - if( j<2 ) return j; - return z[1]==0 || isVowel(z + 1); -} -static int isVowel(const char *z){ - int j; - char x = *z; - if( x==0 ) return 0; - assert( x>='a' && x<='z' ); - j = cType[x-'a']; - if( j<2 ) return 1-j; - return isConsonant(z + 1); -} +struct SegmentNode { + SegmentNode *pParent; /* Parent node (or NULL for root node) */ + SegmentNode *pRight; /* Pointer to right-sibling */ + SegmentNode *pLeftmost; /* Pointer to left-most node of this depth */ + int nEntry; /* Number of terms written to node so far */ + char *zTerm; /* Pointer to previous term buffer */ + int nTerm; /* Number of bytes in zTerm */ + int nMalloc; /* Size of malloc'd buffer at zMalloc */ + char *zMalloc; /* Malloc'd space (possibly) used for zTerm */ + int nData; /* Bytes of valid data so far */ + char *aData; /* Node data */ +}; /* -** Let any sequence of one or more vowels be represented by V and let -** C be sequence of one or more consonants. Then every word can be -** represented as: -** -** [C] (VC){m} [V] -** -** In prose: A word is an optional consonant followed by zero or -** vowel-consonant pairs followed by an optional vowel. "m" is the -** number of vowel consonant pairs. This routine computes the value -** of m for the first i bytes of a word. -** -** Return true if the m-value for z is 1 or more. In other words, -** return true if z contains at least one vowel that is followed -** by a consonant. +** Valid values for the second argument to fts3SqlStmt(). +*/ +#define SQL_DELETE_CONTENT 0 +#define SQL_IS_EMPTY 1 +#define SQL_DELETE_ALL_CONTENT 2 +#define SQL_DELETE_ALL_SEGMENTS 3 +#define SQL_DELETE_ALL_SEGDIR 4 +#define SQL_DELETE_ALL_DOCSIZE 5 +#define SQL_DELETE_ALL_STAT 6 +#define SQL_SELECT_CONTENT_BY_ROWID 7 +#define SQL_NEXT_SEGMENT_INDEX 8 +#define SQL_INSERT_SEGMENTS 9 +#define SQL_NEXT_SEGMENTS_ID 10 +#define SQL_INSERT_SEGDIR 11 +#define SQL_SELECT_LEVEL 12 +#define SQL_SELECT_LEVEL_RANGE 13 +#define SQL_SELECT_LEVEL_COUNT 14 +#define SQL_SELECT_SEGDIR_MAX_LEVEL 15 +#define SQL_DELETE_SEGDIR_LEVEL 16 +#define SQL_DELETE_SEGMENTS_RANGE 17 +#define SQL_CONTENT_INSERT 18 +#define SQL_DELETE_DOCSIZE 19 +#define SQL_REPLACE_DOCSIZE 20 +#define SQL_SELECT_DOCSIZE 21 +#define SQL_SELECT_STAT 22 +#define SQL_REPLACE_STAT 23 + +#define SQL_SELECT_ALL_PREFIX_LEVEL 24 +#define SQL_DELETE_ALL_TERMS_SEGDIR 25 +#define SQL_DELETE_SEGDIR_RANGE 26 +#define SQL_SELECT_ALL_LANGID 27 +#define SQL_FIND_MERGE_LEVEL 28 +#define SQL_MAX_LEAF_NODE_ESTIMATE 29 +#define SQL_DELETE_SEGDIR_ENTRY 30 +#define SQL_SHIFT_SEGDIR_ENTRY 31 +#define SQL_SELECT_SEGDIR 32 +#define SQL_CHOMP_SEGDIR 33 +#define SQL_SEGMENT_IS_APPENDABLE 34 +#define SQL_SELECT_INDEXES 35 +#define SQL_SELECT_MXLEVEL 36 + +#define SQL_SELECT_LEVEL_RANGE2 37 +#define SQL_UPDATE_LEVEL_IDX 38 +#define SQL_UPDATE_LEVEL 39 + +/* +** This function is used to obtain an SQLite prepared statement handle +** for the statement identified by the second argument. If successful, +** *pp is set to the requested statement handle and SQLITE_OK returned. +** Otherwise, an SQLite error code is returned and *pp is set to 0. ** -** In this routine z[] is in reverse order. So we are really looking -** for an instance of of a consonant followed by a vowel. +** If argument apVal is not NULL, then it must point to an array with +** at least as many entries as the requested statement has bound +** parameters. The values are bound to the statements parameters before +** returning. */ -static int m_gt_0(const char *z){ - while( isVowel(z) ){ z++; } - if( *z==0 ) return 0; - while( isConsonant(z) ){ z++; } - return *z!=0; +static int fts3SqlStmt( + Fts3Table *p, /* Virtual table handle */ + int eStmt, /* One of the SQL_XXX constants above */ + sqlite3_stmt **pp, /* OUT: Statement handle */ + sqlite3_value **apVal /* Values to bind to statement */ +){ + const char *azSql[] = { +/* 0 */ "DELETE FROM %Q.'%q_content' WHERE rowid = ?", +/* 1 */ "SELECT NOT EXISTS(SELECT docid FROM %Q.'%q_content' WHERE rowid!=?)", +/* 2 */ "DELETE FROM %Q.'%q_content'", +/* 3 */ "DELETE FROM %Q.'%q_segments'", +/* 4 */ "DELETE FROM %Q.'%q_segdir'", +/* 5 */ "DELETE FROM %Q.'%q_docsize'", +/* 6 */ "DELETE FROM %Q.'%q_stat'", +/* 7 */ "SELECT %s WHERE rowid=?", +/* 8 */ "SELECT (SELECT max(idx) FROM %Q.'%q_segdir' WHERE level = ?) + 1", +/* 9 */ "REPLACE INTO %Q.'%q_segments'(blockid, block) VALUES(?, ?)", +/* 10 */ "SELECT coalesce((SELECT max(blockid) FROM %Q.'%q_segments') + 1, 1)", +/* 11 */ "REPLACE INTO %Q.'%q_segdir' VALUES(?,?,?,?,?,?)", + + /* Return segments in order from oldest to newest.*/ +/* 12 */ "SELECT idx, start_block, leaves_end_block, end_block, root " + "FROM %Q.'%q_segdir' WHERE level = ? ORDER BY idx ASC", +/* 13 */ "SELECT idx, start_block, leaves_end_block, end_block, root " + "FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?" + "ORDER BY level DESC, idx ASC", + +/* 14 */ "SELECT count(*) FROM %Q.'%q_segdir' WHERE level = ?", +/* 15 */ "SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?", + +/* 16 */ "DELETE FROM %Q.'%q_segdir' WHERE level = ?", +/* 17 */ "DELETE FROM %Q.'%q_segments' WHERE blockid BETWEEN ? AND ?", +/* 18 */ "INSERT INTO %Q.'%q_content' VALUES(%s)", +/* 19 */ "DELETE FROM %Q.'%q_docsize' WHERE docid = ?", +/* 20 */ "REPLACE INTO %Q.'%q_docsize' VALUES(?,?)", +/* 21 */ "SELECT size FROM %Q.'%q_docsize' WHERE docid=?", +/* 22 */ "SELECT value FROM %Q.'%q_stat' WHERE id=?", +/* 23 */ "REPLACE INTO %Q.'%q_stat' VALUES(?,?)", +/* 24 */ "", +/* 25 */ "", + +/* 26 */ "DELETE FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?", +/* 27 */ "SELECT DISTINCT level / (1024 * ?) FROM %Q.'%q_segdir'", + +/* This statement is used to determine which level to read the input from +** when performing an incremental merge. It returns the absolute level number +** of the oldest level in the db that contains at least ? segments. Or, +** if no level in the FTS index contains more than ? segments, the statement +** returns zero rows. */ +/* 28 */ "SELECT level FROM %Q.'%q_segdir' GROUP BY level HAVING count(*)>=?" + " ORDER BY (level %% 1024) ASC LIMIT 1", + +/* Estimate the upper limit on the number of leaf nodes in a new segment +** created by merging the oldest :2 segments from absolute level :1. See +** function sqlite3Fts3Incrmerge() for details. */ +/* 29 */ "SELECT 2 * total(1 + leaves_end_block - start_block) " + " FROM %Q.'%q_segdir' WHERE level = ? AND idx < ?", + +/* SQL_DELETE_SEGDIR_ENTRY +** Delete the %_segdir entry on absolute level :1 with index :2. */ +/* 30 */ "DELETE FROM %Q.'%q_segdir' WHERE level = ? AND idx = ?", + +/* SQL_SHIFT_SEGDIR_ENTRY +** Modify the idx value for the segment with idx=:3 on absolute level :2 +** to :1. */ +/* 31 */ "UPDATE %Q.'%q_segdir' SET idx = ? WHERE level=? AND idx=?", + +/* SQL_SELECT_SEGDIR +** Read a single entry from the %_segdir table. The entry from absolute +** level :1 with index value :2. */ +/* 32 */ "SELECT idx, start_block, leaves_end_block, end_block, root " + "FROM %Q.'%q_segdir' WHERE level = ? AND idx = ?", + +/* SQL_CHOMP_SEGDIR +** Update the start_block (:1) and root (:2) fields of the %_segdir +** entry located on absolute level :3 with index :4. */ +/* 33 */ "UPDATE %Q.'%q_segdir' SET start_block = ?, root = ?" + "WHERE level = ? AND idx = ?", + +/* SQL_SEGMENT_IS_APPENDABLE +** Return a single row if the segment with end_block=? is appendable. Or +** no rows otherwise. */ +/* 34 */ "SELECT 1 FROM %Q.'%q_segments' WHERE blockid=? AND block IS NULL", + +/* SQL_SELECT_INDEXES +** Return the list of valid segment indexes for absolute level ? */ +/* 35 */ "SELECT idx FROM %Q.'%q_segdir' WHERE level=? ORDER BY 1 ASC", + +/* SQL_SELECT_MXLEVEL +** Return the largest relative level in the FTS index or indexes. */ +/* 36 */ "SELECT max( level %% 1024 ) FROM %Q.'%q_segdir'", + + /* Return segments in order from oldest to newest.*/ +/* 37 */ "SELECT level, idx, end_block " + "FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? " + "ORDER BY level DESC, idx ASC", + + /* Update statements used while promoting segments */ +/* 38 */ "UPDATE OR FAIL %Q.'%q_segdir' SET level=-1,idx=? " + "WHERE level=? AND idx=?", +/* 39 */ "UPDATE OR FAIL %Q.'%q_segdir' SET level=? WHERE level=-1" + + }; + int rc = SQLITE_OK; + sqlite3_stmt *pStmt; + + assert( SizeofArray(azSql)==SizeofArray(p->aStmt) ); + assert( eStmt=0 ); + + pStmt = p->aStmt[eStmt]; + if( !pStmt ){ + char *zSql; + if( eStmt==SQL_CONTENT_INSERT ){ + zSql = sqlite3_mprintf(azSql[eStmt], p->zDb, p->zName, p->zWriteExprlist); + }else if( eStmt==SQL_SELECT_CONTENT_BY_ROWID ){ + zSql = sqlite3_mprintf(azSql[eStmt], p->zReadExprlist); + }else{ + zSql = sqlite3_mprintf(azSql[eStmt], p->zDb, p->zName); + } + if( !zSql ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, NULL); + sqlite3_free(zSql); + assert( rc==SQLITE_OK || pStmt==0 ); + p->aStmt[eStmt] = pStmt; + } + } + if( apVal ){ + int i; + int nParam = sqlite3_bind_parameter_count(pStmt); + for(i=0; rc==SQLITE_OK && i1 instead -** or m>0 -*/ -static int m_gt_1(const char *z){ - while( isVowel(z) ){ z++; } - if( *z==0 ) return 0; - while( isConsonant(z) ){ z++; } - if( *z==0 ) return 0; - while( isVowel(z) ){ z++; } - if( *z==0 ) return 0; - while( isConsonant(z) ){ z++; } - return *z!=0; +SQLITE_PRIVATE int sqlite3Fts3SelectDoctotal( + Fts3Table *pTab, /* Fts3 table handle */ + sqlite3_stmt **ppStmt /* OUT: Statement handle */ +){ + sqlite3_stmt *pStmt = 0; + int rc; + rc = fts3SqlStmt(pTab, SQL_SELECT_STAT, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int(pStmt, 1, FTS_STAT_DOCTOTAL); + if( sqlite3_step(pStmt)!=SQLITE_ROW + || sqlite3_column_type(pStmt, 0)!=SQLITE_BLOB + ){ + rc = sqlite3_reset(pStmt); + if( rc==SQLITE_OK ) rc = FTS_CORRUPT_VTAB; + pStmt = 0; + } + } + *ppStmt = pStmt; + return rc; } -/* -** Return TRUE if there is a vowel anywhere within z[0..n-1] -*/ -static int hasVowel(const char *z){ - while( isConsonant(z) ){ z++; } - return *z!=0; +SQLITE_PRIVATE int sqlite3Fts3SelectDocsize( + Fts3Table *pTab, /* Fts3 table handle */ + sqlite3_int64 iDocid, /* Docid to read size data for */ + sqlite3_stmt **ppStmt /* OUT: Statement handle */ +){ + return fts3SelectDocsize(pTab, iDocid, ppStmt); } /* -** Return TRUE if the word ends in a double consonant. +** Similar to fts3SqlStmt(). Except, after binding the parameters in +** array apVal[] to the SQL statement identified by eStmt, the statement +** is executed. ** -** The text is reversed here. So we are really looking at -** the first two characters of z[]. +** Returns SQLITE_OK if the statement is successfully executed, or an +** SQLite error code otherwise. */ -static int doubleConsonant(const char *z){ - return isConsonant(z) && z[0]==z[1]; +static void fts3SqlExec( + int *pRC, /* Result code */ + Fts3Table *p, /* The FTS3 table */ + int eStmt, /* Index of statement to evaluate */ + sqlite3_value **apVal /* Parameters to bind */ +){ + sqlite3_stmt *pStmt; + int rc; + if( *pRC ) return; + rc = fts3SqlStmt(p, eStmt, &pStmt, apVal); + if( rc==SQLITE_OK ){ + sqlite3_step(pStmt); + rc = sqlite3_reset(pStmt); + } + *pRC = rc; } + /* -** Return TRUE if the word ends with three letters which -** are consonant-vowel-consonent and where the final consonant -** is not 'w', 'x', or 'y'. +** This function ensures that the caller has obtained an exclusive +** shared-cache table-lock on the %_segdir table. This is required before +** writing data to the fts3 table. If this lock is not acquired first, then +** the caller may end up attempting to take this lock as part of committing +** a transaction, causing SQLite to return SQLITE_LOCKED or +** LOCKED_SHAREDCACHEto a COMMIT command. ** -** The word is reversed here. So we are really checking the -** first three letters and the first one cannot be in [wxy]. +** It is best to avoid this because if FTS3 returns any error when +** committing a transaction, the whole transaction will be rolled back. +** And this is not what users expect when they get SQLITE_LOCKED_SHAREDCACHE. +** It can still happen if the user locks the underlying tables directly +** instead of accessing them via FTS. */ -static int star_oh(const char *z){ - return - isConsonant(z) && - z[0]!='w' && z[0]!='x' && z[0]!='y' && - isVowel(z+1) && - isConsonant(z+2); +static int fts3Writelock(Fts3Table *p){ + int rc = SQLITE_OK; + + if( p->nPendingData==0 ){ + sqlite3_stmt *pStmt; + rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_LEVEL, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_null(pStmt, 1); + sqlite3_step(pStmt); + rc = sqlite3_reset(pStmt); + } + } + + return rc; } /* -** If the word ends with zFrom and xCond() is true for the stem -** of the word that preceeds the zFrom ending, then change the -** ending to zTo. +** FTS maintains a separate indexes for each language-id (a 32-bit integer). +** Within each language id, a separate index is maintained to store the +** document terms, and each configured prefix size (configured the FTS +** "prefix=" option). And each index consists of multiple levels ("relative +** levels"). ** -** The input word *pz and zFrom are both in reverse order. zTo -** is in normal order. +** All three of these values (the language id, the specific index and the +** level within the index) are encoded in 64-bit integer values stored +** in the %_segdir table on disk. This function is used to convert three +** separate component values into the single 64-bit integer value that +** can be used to query the %_segdir table. ** -** Return TRUE if zFrom matches. Return FALSE if zFrom does not -** match. Not that TRUE is returned even if xCond() fails and -** no substitution occurs. +** Specifically, each language-id/index combination is allocated 1024 +** 64-bit integer level values ("absolute levels"). The main terms index +** for language-id 0 is allocate values 0-1023. The first prefix index +** (if any) for language-id 0 is allocated values 1024-2047. And so on. +** Language 1 indexes are allocated immediately following language 0. +** +** So, for a system with nPrefix prefix indexes configured, the block of +** absolute levels that corresponds to language-id iLangid and index +** iIndex starts at absolute level ((iLangid * (nPrefix+1) + iIndex) * 1024). */ -static int stem( - char **pz, /* The word being stemmed (Reversed) */ - const char *zFrom, /* If the ending matches this... (Reversed) */ - const char *zTo, /* ... change the ending to this (not reversed) */ - int (*xCond)(const char*) /* Condition that must be true */ +static sqlite3_int64 getAbsoluteLevel( + Fts3Table *p, /* FTS3 table handle */ + int iLangid, /* Language id */ + int iIndex, /* Index in p->aIndex[] */ + int iLevel /* Level of segments */ ){ - char *z = *pz; - while( *zFrom && *zFrom==*z ){ z++; zFrom++; } - if( *zFrom!=0 ) return 0; - if( xCond && !xCond(z) ) return 1; - while( *zTo ){ - *(--z) = *(zTo++); - } - *pz = z; - return 1; + sqlite3_int64 iBase; /* First absolute level for iLangid/iIndex */ + assert( iLangid>=0 ); + assert( p->nIndex>0 ); + assert( iIndex>=0 && iIndexnIndex ); + + iBase = ((sqlite3_int64)iLangid * p->nIndex + iIndex) * FTS3_SEGDIR_MAXLEVEL; + return iBase + iLevel; } /* -** This is the fallback stemmer used when the porter stemmer is -** inappropriate. The input word is copied into the output with -** US-ASCII case folding. If the input word is too long (more -** than 20 bytes if it contains no digits or more than 6 bytes if -** it contains digits) then word is truncated to 20 or 6 bytes -** by taking 10 or 3 bytes from the beginning and end. +** Set *ppStmt to a statement handle that may be used to iterate through +** all rows in the %_segdir table, from oldest to newest. If successful, +** return SQLITE_OK. If an error occurs while preparing the statement, +** return an SQLite error code. +** +** There is only ever one instance of this SQL statement compiled for +** each FTS3 table. +** +** The statement returns the following columns from the %_segdir table: +** +** 0: idx +** 1: start_block +** 2: leaves_end_block +** 3: end_block +** 4: root */ -static void copy_stemmer(const char *zIn, int nIn, char *zOut, int *pnOut){ - int i, mx, j; - int hasDigit = 0; - for(i=0; i='A' && c<='Z' ){ - zOut[i] = c - 'A' + 'a'; - }else{ - if( c>='0' && c<='9' ) hasDigit = 1; - zOut[i] = c; +SQLITE_PRIVATE int sqlite3Fts3AllSegdirs( + Fts3Table *p, /* FTS3 table */ + int iLangid, /* Language being queried */ + int iIndex, /* Index for p->aIndex[] */ + int iLevel, /* Level to select (relative level) */ + sqlite3_stmt **ppStmt /* OUT: Compiled statement */ +){ + int rc; + sqlite3_stmt *pStmt = 0; + + assert( iLevel==FTS3_SEGCURSOR_ALL || iLevel>=0 ); + assert( iLevel=0 && iIndexnIndex ); + + if( iLevel<0 ){ + /* "SELECT * FROM %_segdir WHERE level BETWEEN ? AND ? ORDER BY ..." */ + rc = fts3SqlStmt(p, SQL_SELECT_LEVEL_RANGE, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pStmt, 1, getAbsoluteLevel(p, iLangid, iIndex, 0)); + sqlite3_bind_int64(pStmt, 2, + getAbsoluteLevel(p, iLangid, iIndex, FTS3_SEGDIR_MAXLEVEL-1) + ); } - } - mx = hasDigit ? 3 : 10; - if( nIn>mx*2 ){ - for(j=mx, i=nIn-mx; i=(int)sizeof(zReverse)-7 ){ - /* The word is too big or too small for the porter stemmer. - ** Fallback to the copy stemmer */ - copy_stemmer(zIn, nIn, zOut, pnOut); - return; - } - for(i=0, j=sizeof(zReverse)-6; i='A' && c<='Z' ){ - zReverse[j] = c + 'a' - 'A'; - }else if( c>='a' && c<='z' ){ - zReverse[j] = c; - }else{ - /* The use of a character not in [a-zA-Z] means that we fallback - ** to the copy stemmer */ - copy_stemmer(zIn, nIn, zOut, pnOut); - return; - } - } - memset(&zReverse[sizeof(zReverse)-5], 0, 5); - z = &zReverse[j+1]; - +static int fts3PendingListAppendVarint( + PendingList **pp, /* IN/OUT: Pointer to PendingList struct */ + sqlite3_int64 i /* Value to append to data */ +){ + PendingList *p = *pp; - /* Step 1a */ - if( z[0]=='s' ){ - if( - !stem(&z, "sess", "ss", 0) && - !stem(&z, "sei", "i", 0) && - !stem(&z, "ss", "ss", 0) - ){ - z++; + /* Allocate or grow the PendingList as required. */ + if( !p ){ + p = sqlite3_malloc(sizeof(*p) + 100); + if( !p ){ + return SQLITE_NOMEM; } + p->nSpace = 100; + p->aData = (char *)&p[1]; + p->nData = 0; } - - /* Step 1b */ - z2 = z; - if( stem(&z, "dee", "ee", m_gt_0) ){ - /* Do nothing. The work was all in the test */ - }else if( - (stem(&z, "gni", "", hasVowel) || stem(&z, "de", "", hasVowel)) - && z!=z2 - ){ - if( stem(&z, "ta", "ate", 0) || - stem(&z, "lb", "ble", 0) || - stem(&z, "zi", "ize", 0) ){ - /* Do nothing. The work was all in the test */ - }else if( doubleConsonant(z) && (*z!='l' && *z!='s' && *z!='z') ){ - z++; - }else if( m_eq_1(z) && star_oh(z) ){ - *(--z) = 'e'; - } + else if( p->nData+FTS3_VARINT_MAX+1>p->nSpace ){ + int nNew = p->nSpace * 2; + p = sqlite3_realloc(p, sizeof(*p) + nNew); + if( !p ){ + sqlite3_free(*pp); + *pp = 0; + return SQLITE_NOMEM; + } + p->nSpace = nNew; + p->aData = (char *)&p[1]; } - /* Step 1c */ - if( z[0]=='y' && hasVowel(z+1) ){ - z[0] = 'i'; - } + /* Append the new serialized varint to the end of the list. */ + p->nData += sqlite3Fts3PutVarint(&p->aData[p->nData], i); + p->aData[p->nData] = '\0'; + *pp = p; + return SQLITE_OK; +} - /* Step 2 */ - switch( z[1] ){ - case 'a': - stem(&z, "lanoita", "ate", m_gt_0) || - stem(&z, "lanoit", "tion", m_gt_0); - break; - case 'c': - stem(&z, "icne", "ence", m_gt_0) || - stem(&z, "icna", "ance", m_gt_0); - break; - case 'e': - stem(&z, "rezi", "ize", m_gt_0); - break; - case 'g': - stem(&z, "igol", "log", m_gt_0); - break; - case 'l': - stem(&z, "ilb", "ble", m_gt_0) || - stem(&z, "illa", "al", m_gt_0) || - stem(&z, "iltne", "ent", m_gt_0) || - stem(&z, "ile", "e", m_gt_0) || - stem(&z, "ilsuo", "ous", m_gt_0); - break; - case 'o': - stem(&z, "noitazi", "ize", m_gt_0) || - stem(&z, "noita", "ate", m_gt_0) || - stem(&z, "rota", "ate", m_gt_0); - break; - case 's': - stem(&z, "msila", "al", m_gt_0) || - stem(&z, "ssenevi", "ive", m_gt_0) || - stem(&z, "ssenluf", "ful", m_gt_0) || - stem(&z, "ssensuo", "ous", m_gt_0); - break; - case 't': - stem(&z, "itila", "al", m_gt_0) || - stem(&z, "itivi", "ive", m_gt_0) || - stem(&z, "itilib", "ble", m_gt_0); - break; - } +/* +** Add a docid/column/position entry to a PendingList structure. Non-zero +** is returned if the structure is sqlite3_realloced as part of adding +** the entry. Otherwise, zero. +** +** If an OOM error occurs, *pRc is set to SQLITE_NOMEM before returning. +** Zero is always returned in this case. Otherwise, if no OOM error occurs, +** it is set to SQLITE_OK. +*/ +static int fts3PendingListAppend( + PendingList **pp, /* IN/OUT: PendingList structure */ + sqlite3_int64 iDocid, /* Docid for entry to add */ + sqlite3_int64 iCol, /* Column for entry to add */ + sqlite3_int64 iPos, /* Position of term for entry to add */ + int *pRc /* OUT: Return code */ +){ + PendingList *p = *pp; + int rc = SQLITE_OK; - /* Step 3 */ - switch( z[0] ){ - case 'e': - stem(&z, "etaci", "ic", m_gt_0) || - stem(&z, "evita", "", m_gt_0) || - stem(&z, "ezila", "al", m_gt_0); - break; - case 'i': - stem(&z, "itici", "ic", m_gt_0); - break; - case 'l': - stem(&z, "laci", "ic", m_gt_0) || - stem(&z, "luf", "", m_gt_0); - break; - case 's': - stem(&z, "ssen", "", m_gt_0); - break; - } + assert( !p || p->iLastDocid<=iDocid ); - /* Step 4 */ - switch( z[1] ){ - case 'a': - if( z[0]=='l' && m_gt_1(z+2) ){ - z += 2; - } - break; - case 'c': - if( z[0]=='e' && z[2]=='n' && (z[3]=='a' || z[3]=='e') && m_gt_1(z+4) ){ - z += 4; - } - break; - case 'e': - if( z[0]=='r' && m_gt_1(z+2) ){ - z += 2; - } - break; - case 'i': - if( z[0]=='c' && m_gt_1(z+2) ){ - z += 2; - } - break; - case 'l': - if( z[0]=='e' && z[2]=='b' && (z[3]=='a' || z[3]=='i') && m_gt_1(z+4) ){ - z += 4; - } - break; - case 'n': - if( z[0]=='t' ){ - if( z[2]=='a' ){ - if( m_gt_1(z+3) ){ - z += 3; - } - }else if( z[2]=='e' ){ - stem(&z, "tneme", "", m_gt_1) || - stem(&z, "tnem", "", m_gt_1) || - stem(&z, "tne", "", m_gt_1); - } - } - break; - case 'o': - if( z[0]=='u' ){ - if( m_gt_1(z+2) ){ - z += 2; - } - }else if( z[3]=='s' || z[3]=='t' ){ - stem(&z, "noi", "", m_gt_1); - } - break; - case 's': - if( z[0]=='m' && z[2]=='i' && m_gt_1(z+3) ){ - z += 3; - } - break; - case 't': - stem(&z, "eta", "", m_gt_1) || - stem(&z, "iti", "", m_gt_1); - break; - case 'u': - if( z[0]=='s' && z[2]=='o' && m_gt_1(z+3) ){ - z += 3; - } - break; - case 'v': - case 'z': - if( z[0]=='e' && z[2]=='i' && m_gt_1(z+3) ){ - z += 3; - } - break; + if( !p || p->iLastDocid!=iDocid ){ + sqlite3_int64 iDelta = iDocid - (p ? p->iLastDocid : 0); + if( p ){ + assert( p->nDatanSpace ); + assert( p->aData[p->nData]==0 ); + p->nData++; + } + if( SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, iDelta)) ){ + goto pendinglistappend_out; + } + p->iLastCol = -1; + p->iLastPos = 0; + p->iLastDocid = iDocid; } - - /* Step 5a */ - if( z[0]=='e' ){ - if( m_gt_1(z+1) ){ - z++; - }else if( m_eq_1(z+1) && !star_oh(z+1) ){ - z++; + if( iCol>0 && p->iLastCol!=iCol ){ + if( SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, 1)) + || SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, iCol)) + ){ + goto pendinglistappend_out; } + p->iLastCol = iCol; + p->iLastPos = 0; } - - /* Step 5b */ - if( m_gt_1(z) && z[0]=='l' && z[1]=='l' ){ - z++; + if( iCol>=0 ){ + assert( iPos>p->iLastPos || (iPos==0 && p->iLastPos==0) ); + rc = fts3PendingListAppendVarint(&p, 2+iPos-p->iLastPos); + if( rc==SQLITE_OK ){ + p->iLastPos = iPos; + } } - /* z[] is now the stemmed word in reverse order. Flip it back - ** around into forward order and return. - */ - *pnOut = i = (int)strlen(z); - zOut[i] = 0; - while( *z ){ - zOut[--i] = *(z++); + pendinglistappend_out: + *pRc = rc; + if( p!=*pp ){ + *pp = p; + return 1; } + return 0; } /* -** Characters that can be part of a token. We assume any character -** whose value is greater than 0x80 (any UTF character) can be -** part of a token. In other words, delimiters all must have -** values of 0x7f or lower. +** Free a PendingList object allocated by fts3PendingListAppend(). */ -static const char porterIdChar[] = { -/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 3x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 4x */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, /* 5x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6x */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* 7x */ -}; -#define isDelim(C) (((ch=C)&0x80)==0 && (ch<0x30 || !porterIdChar[ch-0x30])) +static void fts3PendingListDelete(PendingList *pList){ + sqlite3_free(pList); +} /* -** Extract the next token from a tokenization cursor. The cursor must -** have been opened by a prior call to porterOpen(). +** Add an entry to one of the pending-terms hash tables. */ -static int porterNext( - sqlite3_tokenizer_cursor *pCursor, /* Cursor returned by porterOpen */ - const char **pzToken, /* OUT: *pzToken is the token text */ - int *pnBytes, /* OUT: Number of bytes in token */ - int *piStartOffset, /* OUT: Starting offset of token */ - int *piEndOffset, /* OUT: Ending offset of token */ - int *piPosition /* OUT: Position integer of token */ +static int fts3PendingTermsAddOne( + Fts3Table *p, + int iCol, + int iPos, + Fts3Hash *pHash, /* Pending terms hash table to add entry to */ + const char *zToken, + int nToken ){ - porter_tokenizer_cursor *c = (porter_tokenizer_cursor *) pCursor; - const char *z = c->zInput; - - while( c->iOffsetnInput ){ - int iStartOffset, ch; - - /* Scan past delimiter characters */ - while( c->iOffsetnInput && isDelim(z[c->iOffset]) ){ - c->iOffset++; - } - - /* Count non-delimiter characters. */ - iStartOffset = c->iOffset; - while( c->iOffsetnInput && !isDelim(z[c->iOffset]) ){ - c->iOffset++; - } + PendingList *pList; + int rc = SQLITE_OK; - if( c->iOffset>iStartOffset ){ - int n = c->iOffset-iStartOffset; - if( n>c->nAllocated ){ - char *pNew; - c->nAllocated = n+20; - pNew = sqlite3_realloc(c->zToken, c->nAllocated); - if( !pNew ) return SQLITE_NOMEM; - c->zToken = pNew; - } - porter_stemmer(&z[iStartOffset], n, c->zToken, pnBytes); - *pzToken = c->zToken; - *piStartOffset = iStartOffset; - *piEndOffset = c->iOffset; - *piPosition = c->iToken++; - return SQLITE_OK; + pList = (PendingList *)fts3HashFind(pHash, zToken, nToken); + if( pList ){ + p->nPendingData -= (pList->nData + nToken + sizeof(Fts3HashElem)); + } + if( fts3PendingListAppend(&pList, p->iPrevDocid, iCol, iPos, &rc) ){ + if( pList==fts3HashInsert(pHash, zToken, nToken, pList) ){ + /* Malloc failed while inserting the new entry. This can only + ** happen if there was no previous entry for this token. + */ + assert( 0==fts3HashFind(pHash, zToken, nToken) ); + sqlite3_free(pList); + rc = SQLITE_NOMEM; } } - return SQLITE_DONE; + if( rc==SQLITE_OK ){ + p->nPendingData += (pList->nData + nToken + sizeof(Fts3HashElem)); + } + return rc; } /* -** The set of routines that implement the porter-stemmer tokenizer +** Tokenize the nul-terminated string zText and add all tokens to the +** pending-terms hash-table. The docid used is that currently stored in +** p->iPrevDocid, and the column is specified by argument iCol. +** +** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code. */ -static const sqlite3_tokenizer_module porterTokenizerModule = { - 0, - porterCreate, - porterDestroy, - porterOpen, - porterClose, - porterNext, -}; +static int fts3PendingTermsAdd( + Fts3Table *p, /* Table into which text will be inserted */ + int iLangid, /* Language id to use */ + const char *zText, /* Text of document to be inserted */ + int iCol, /* Column into which text is being inserted */ + u32 *pnWord /* IN/OUT: Incr. by number tokens inserted */ +){ + int rc; + int iStart = 0; + int iEnd = 0; + int iPos = 0; + int nWord = 0; + + char const *zToken; + int nToken = 0; + + sqlite3_tokenizer *pTokenizer = p->pTokenizer; + sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; + sqlite3_tokenizer_cursor *pCsr; + int (*xNext)(sqlite3_tokenizer_cursor *pCursor, + const char**,int*,int*,int*,int*); + + assert( pTokenizer && pModule ); + + /* If the user has inserted a NULL value, this function may be called with + ** zText==0. In this case, add zero token entries to the hash table and + ** return early. */ + if( zText==0 ){ + *pnWord = 0; + return SQLITE_OK; + } + + rc = sqlite3Fts3OpenTokenizer(pTokenizer, iLangid, zText, -1, &pCsr); + if( rc!=SQLITE_OK ){ + return rc; + } + + xNext = pModule->xNext; + while( SQLITE_OK==rc + && SQLITE_OK==(rc = xNext(pCsr, &zToken, &nToken, &iStart, &iEnd, &iPos)) + ){ + int i; + if( iPos>=nWord ) nWord = iPos+1; + + /* Positions cannot be negative; we use -1 as a terminator internally. + ** Tokens must have a non-zero length. + */ + if( iPos<0 || !zToken || nToken<=0 ){ + rc = SQLITE_ERROR; + break; + } + + /* Add the term to the terms index */ + rc = fts3PendingTermsAddOne( + p, iCol, iPos, &p->aIndex[0].hPending, zToken, nToken + ); + + /* Add the term to each of the prefix indexes that it is not too + ** short for. */ + for(i=1; rc==SQLITE_OK && inIndex; i++){ + struct Fts3Index *pIndex = &p->aIndex[i]; + if( nTokennPrefix ) continue; + rc = fts3PendingTermsAddOne( + p, iCol, iPos, &pIndex->hPending, zToken, pIndex->nPrefix + ); + } + } -/* -** Allocate a new porter tokenizer. Return a pointer to the new -** tokenizer in *ppModule + pModule->xClose(pCsr); + *pnWord += nWord; + return (rc==SQLITE_DONE ? SQLITE_OK : rc); +} + +/* +** Calling this function indicates that subsequent calls to +** fts3PendingTermsAdd() are to add term/position-list pairs for the +** contents of the document with docid iDocid. */ -SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule( - sqlite3_tokenizer_module const**ppModule +static int fts3PendingTermsDocid( + Fts3Table *p, /* Full-text table handle */ + int iLangid, /* Language id of row being written */ + sqlite_int64 iDocid /* Docid of row being written */ ){ - *ppModule = &porterTokenizerModule; -} + assert( iLangid>=0 ); -#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ + /* TODO(shess) Explore whether partially flushing the buffer on + ** forced-flush would provide better performance. I suspect that if + ** we ordered the doclists by size and flushed the largest until the + ** buffer was half empty, that would let the less frequent terms + ** generate longer doclists. + */ + if( iDocid<=p->iPrevDocid + || p->iPrevLangid!=iLangid + || p->nPendingData>p->nMaxPendingData + ){ + int rc = sqlite3Fts3PendingTermsFlush(p); + if( rc!=SQLITE_OK ) return rc; + } + p->iPrevDocid = iDocid; + p->iPrevLangid = iLangid; + return SQLITE_OK; +} -/************** End of fts3_porter.c *****************************************/ -/************** Begin file fts3_tokenizer.c **********************************/ /* -** 2007 June 22 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** This is part of an SQLite module implementing full-text search. -** This particular file implements the generic tokenizer interface. +** Discard the contents of the pending-terms hash tables. */ +SQLITE_PRIVATE void sqlite3Fts3PendingTermsClear(Fts3Table *p){ + int i; + for(i=0; inIndex; i++){ + Fts3HashElem *pElem; + Fts3Hash *pHash = &p->aIndex[i].hPending; + for(pElem=fts3HashFirst(pHash); pElem; pElem=fts3HashNext(pElem)){ + PendingList *pList = (PendingList *)fts3HashData(pElem); + fts3PendingListDelete(pList); + } + fts3HashClear(pHash); + } + p->nPendingData = 0; +} /* -** The code in this file is only compiled if: -** -** * The FTS3 module is being built as an extension -** (in which case SQLITE_CORE is not defined), or +** This function is called by the xUpdate() method as part of an INSERT +** operation. It adds entries for each term in the new record to the +** pendingTerms hash table. ** -** * The FTS3 module is being built into the core of -** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). +** Argument apVal is the same as the similarly named argument passed to +** fts3InsertData(). Parameter iDocid is the docid of the new row. */ -#ifndef SQLITE_CORE - SQLITE_EXTENSION_INIT1 -#endif - -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - +static int fts3InsertTerms( + Fts3Table *p, + int iLangid, + sqlite3_value **apVal, + u32 *aSz +){ + int i; /* Iterator variable */ + for(i=2; inColumn+2; i++){ + int iCol = i-2; + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_value_text(apVal[i]); + int rc = fts3PendingTermsAdd(p, iLangid, zText, iCol, &aSz[iCol]); + if( rc!=SQLITE_OK ){ + return rc; + } + aSz[p->nColumn] += sqlite3_value_bytes(apVal[i]); + } + } + return SQLITE_OK; +} /* -** Implementation of the SQL scalar function for accessing the underlying -** hash table. This function may be called as follows: -** -** SELECT (); -** SELECT (, ); -** -** where is the name passed as the second argument -** to the sqlite3Fts3InitHashTable() function (e.g. 'fts3_tokenizer'). -** -** If the argument is specified, it must be a blob value -** containing a pointer to be stored as the hash data corresponding -** to the string . If is not specified, then -** the string must already exist in the has table. Otherwise, -** an error is returned. +** This function is called by the xUpdate() method for an INSERT operation. +** The apVal parameter is passed a copy of the apVal argument passed by +** SQLite to the xUpdate() method. i.e: ** -** Whether or not the argument is specified, the value returned -** is a blob containing the pointer stored as the hash data corresponding -** to string (after the hash-table is updated, if applicable). +** apVal[0] Not used for INSERT. +** apVal[1] rowid +** apVal[2] Left-most user-defined column +** ... +** apVal[p->nColumn+1] Right-most user-defined column +** apVal[p->nColumn+2] Hidden column with same name as table +** apVal[p->nColumn+3] Hidden "docid" column (alias for rowid) +** apVal[p->nColumn+4] Hidden languageid column */ -static void scalarFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static int fts3InsertData( + Fts3Table *p, /* Full-text table */ + sqlite3_value **apVal, /* Array of values to insert */ + sqlite3_int64 *piDocid /* OUT: Docid for row just inserted */ ){ - Fts3Hash *pHash; - void *pPtr = 0; - const unsigned char *zName; - int nName; - - assert( argc==1 || argc==2 ); - - pHash = (Fts3Hash *)sqlite3_user_data(context); - - zName = sqlite3_value_text(argv[0]); - nName = sqlite3_value_bytes(argv[0])+1; + int rc; /* Return code */ + sqlite3_stmt *pContentInsert; /* INSERT INTO %_content VALUES(...) */ - if( argc==2 ){ - void *pOld; - int n = sqlite3_value_bytes(argv[1]); - if( n!=sizeof(pPtr) ){ - sqlite3_result_error(context, "argument type mismatch", -1); - return; + if( p->zContentTbl ){ + sqlite3_value *pRowid = apVal[p->nColumn+3]; + if( sqlite3_value_type(pRowid)==SQLITE_NULL ){ + pRowid = apVal[1]; } - pPtr = *(void **)sqlite3_value_blob(argv[1]); - pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr); - if( pOld==pPtr ){ - sqlite3_result_error(context, "out of memory", -1); - return; + if( sqlite3_value_type(pRowid)!=SQLITE_INTEGER ){ + return SQLITE_CONSTRAINT; } - }else{ - pPtr = sqlite3Fts3HashFind(pHash, zName, nName); - if( !pPtr ){ - char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); - return; + *piDocid = sqlite3_value_int64(pRowid); + return SQLITE_OK; + } + + /* Locate the statement handle used to insert data into the %_content + ** table. The SQL for this statement is: + ** + ** INSERT INTO %_content VALUES(?, ?, ?, ...) + ** + ** The statement features N '?' variables, where N is the number of user + ** defined columns in the FTS3 table, plus one for the docid field. + */ + rc = fts3SqlStmt(p, SQL_CONTENT_INSERT, &pContentInsert, &apVal[1]); + if( rc==SQLITE_OK && p->zLanguageid ){ + rc = sqlite3_bind_int( + pContentInsert, p->nColumn+2, + sqlite3_value_int(apVal[p->nColumn+4]) + ); + } + if( rc!=SQLITE_OK ) return rc; + + /* There is a quirk here. The users INSERT statement may have specified + ** a value for the "rowid" field, for the "docid" field, or for both. + ** Which is a problem, since "rowid" and "docid" are aliases for the + ** same value. For example: + ** + ** INSERT INTO fts3tbl(rowid, docid) VALUES(1, 2); + ** + ** In FTS3, this is an error. It is an error to specify non-NULL values + ** for both docid and some other rowid alias. + */ + if( SQLITE_NULL!=sqlite3_value_type(apVal[3+p->nColumn]) ){ + if( SQLITE_NULL==sqlite3_value_type(apVal[0]) + && SQLITE_NULL!=sqlite3_value_type(apVal[1]) + ){ + /* A rowid/docid conflict. */ + return SQLITE_ERROR; } + rc = sqlite3_bind_value(pContentInsert, 1, apVal[3+p->nColumn]); + if( rc!=SQLITE_OK ) return rc; } - sqlite3_result_blob(context, (void *)&pPtr, sizeof(pPtr), SQLITE_TRANSIENT); -} + /* Execute the statement to insert the record. Set *piDocid to the + ** new docid value. + */ + sqlite3_step(pContentInsert); + rc = sqlite3_reset(pContentInsert); -SQLITE_PRIVATE int sqlite3Fts3IsIdChar(char c){ - static const char isFtsIdChar[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 1x */ - 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 2x */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, /* 3x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 4x */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, /* 5x */ - 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6x */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* 7x */ - }; - return (c&0x80 || isFtsIdChar[(int)(c)]); + *piDocid = sqlite3_last_insert_rowid(p->db); + return rc; } -SQLITE_PRIVATE const char *sqlite3Fts3NextToken(const char *zStr, int *pn){ - const char *z1; - const char *z2 = 0; - /* Find the start of the next token. */ - z1 = zStr; - while( z2==0 ){ - char c = *z1; - switch( c ){ - case '\0': return 0; /* No more tokens here */ - case '\'': - case '"': - case '`': { - z2 = z1; - while( *++z2 && (*z2!=c || *++z2==c) ); - break; - } - case '[': - z2 = &z1[1]; - while( *z2 && z2[0]!=']' ) z2++; - if( *z2 ) z2++; - break; - default: - if( sqlite3Fts3IsIdChar(*z1) ){ - z2 = &z1[1]; - while( sqlite3Fts3IsIdChar(*z2) ) z2++; - }else{ - z1++; - } - } +/* +** Remove all data from the FTS3 table. Clear the hash table containing +** pending terms. +*/ +static int fts3DeleteAll(Fts3Table *p, int bContent){ + int rc = SQLITE_OK; /* Return code */ + + /* Discard the contents of the pending-terms hash table. */ + sqlite3Fts3PendingTermsClear(p); + + /* Delete everything from the shadow tables. Except, leave %_content as + ** is if bContent is false. */ + assert( p->zContentTbl==0 || bContent==0 ); + if( bContent ) fts3SqlExec(&rc, p, SQL_DELETE_ALL_CONTENT, 0); + fts3SqlExec(&rc, p, SQL_DELETE_ALL_SEGMENTS, 0); + fts3SqlExec(&rc, p, SQL_DELETE_ALL_SEGDIR, 0); + if( p->bHasDocsize ){ + fts3SqlExec(&rc, p, SQL_DELETE_ALL_DOCSIZE, 0); } + if( p->bHasStat ){ + fts3SqlExec(&rc, p, SQL_DELETE_ALL_STAT, 0); + } + return rc; +} - *pn = (int)(z2-z1); - return z1; +/* +** +*/ +static int langidFromSelect(Fts3Table *p, sqlite3_stmt *pSelect){ + int iLangid = 0; + if( p->zLanguageid ) iLangid = sqlite3_column_int(pSelect, p->nColumn+1); + return iLangid; } -SQLITE_PRIVATE int sqlite3Fts3InitTokenizer( - Fts3Hash *pHash, /* Tokenizer hash table */ - const char *zArg, /* Tokenizer name */ - sqlite3_tokenizer **ppTok, /* OUT: Tokenizer (if applicable) */ - char **pzErr /* OUT: Set to malloced error message */ +/* +** The first element in the apVal[] array is assumed to contain the docid +** (an integer) of a row about to be deleted. Remove all terms from the +** full-text index. +*/ +static void fts3DeleteTerms( + int *pRC, /* Result code */ + Fts3Table *p, /* The FTS table to delete from */ + sqlite3_value *pRowid, /* The docid to be deleted */ + u32 *aSz, /* Sizes of deleted document written here */ + int *pbFound /* OUT: Set to true if row really does exist */ ){ int rc; - char *z = (char *)zArg; - int n = 0; - char *zCopy; - char *zEnd; /* Pointer to nul-term of zCopy */ - sqlite3_tokenizer_module *m; - - zCopy = sqlite3_mprintf("%s", zArg); - if( !zCopy ) return SQLITE_NOMEM; - zEnd = &zCopy[strlen(zCopy)]; - - z = (char *)sqlite3Fts3NextToken(zCopy, &n); - z[n] = '\0'; - sqlite3Fts3Dequote(z); + sqlite3_stmt *pSelect; - m = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash,z,(int)strlen(z)+1); - if( !m ){ - *pzErr = sqlite3_mprintf("unknown tokenizer: %s", z); - rc = SQLITE_ERROR; - }else{ - char const **aArg = 0; - int iArg = 0; - z = &z[n+1]; - while( znColumn; i++){ + int iCol = i-1; + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pSelect, i); + rc = fts3PendingTermsAdd(p, iLangid, zText, -1, &aSz[iCol]); + aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i); + } } - aArg = aNew; - aArg[iArg++] = z; - z[n] = '\0'; - sqlite3Fts3Dequote(z); - z = &z[n+1]; - } - rc = m->xCreate(iArg, aArg, ppTok); - assert( rc!=SQLITE_OK || *ppTok ); - if( rc!=SQLITE_OK ){ - *pzErr = sqlite3_mprintf("unknown tokenizer"); - }else{ - (*ppTok)->pModule = m; + if( rc!=SQLITE_OK ){ + sqlite3_reset(pSelect); + *pRC = rc; + return; + } + *pbFound = 1; } - sqlite3_free((void *)aArg); + rc = sqlite3_reset(pSelect); + }else{ + sqlite3_reset(pSelect); } - - sqlite3_free(zCopy); - return rc; + *pRC = rc; } - -#ifdef SQLITE_TEST - - /* -** Implementation of a special SQL scalar function for testing tokenizers -** designed to be used in concert with the Tcl testing framework. This -** function must be called with two arguments: -** -** SELECT (, ); -** SELECT (, ); -** -** where is the name passed as the second argument -** to the sqlite3Fts3InitHashTable() function (e.g. 'fts3_tokenizer') -** concatenated with the string '_test' (e.g. 'fts3_tokenizer_test'). -** -** The return value is a string that may be interpreted as a Tcl -** list. For each token in the , three elements are -** added to the returned list. The first is the token position, the -** second is the token text (folded, stemmed, etc.) and the third is the -** substring of associated with the token. For example, -** using the built-in "simple" tokenizer: +** Forward declaration to account for the circular dependency between +** functions fts3SegmentMerge() and fts3AllocateSegdirIdx(). +*/ +static int fts3SegmentMerge(Fts3Table *, int, int, int); + +/* +** This function allocates a new level iLevel index in the segdir table. +** Usually, indexes are allocated within a level sequentially starting +** with 0, so the allocated index is one greater than the value returned +** by: ** -** SELECT fts_tokenizer_test('simple', 'I don't see how'); +** SELECT max(idx) FROM %_segdir WHERE level = :iLevel ** -** will return the string: +** However, if there are already FTS3_MERGE_COUNT indexes at the requested +** level, they are merged into a single level (iLevel+1) segment and the +** allocated index is 0. ** -** "{0 i I 1 dont don't 2 see see 3 how how}" -** +** If successful, *piIdx is set to the allocated index slot and SQLITE_OK +** returned. Otherwise, an SQLite error code is returned. */ -static void testFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static int fts3AllocateSegdirIdx( + Fts3Table *p, + int iLangid, /* Language id */ + int iIndex, /* Index for p->aIndex */ + int iLevel, + int *piIdx ){ - Fts3Hash *pHash; - sqlite3_tokenizer_module *p; - sqlite3_tokenizer *pTokenizer = 0; - sqlite3_tokenizer_cursor *pCsr = 0; - - const char *zErr = 0; - - const char *zName; - int nName; - const char *zInput; - int nInput; - - const char *zArg = 0; - - const char *zToken; - int nToken; - int iStart; - int iEnd; - int iPos; - - Tcl_Obj *pRet; - - assert( argc==2 || argc==3 ); - - nName = sqlite3_value_bytes(argv[0]); - zName = (const char *)sqlite3_value_text(argv[0]); - nInput = sqlite3_value_bytes(argv[argc-1]); - zInput = (const char *)sqlite3_value_text(argv[argc-1]); - - if( argc==3 ){ - zArg = (const char *)sqlite3_value_text(argv[1]); - } - - pHash = (Fts3Hash *)sqlite3_user_data(context); - p = (sqlite3_tokenizer_module *)sqlite3Fts3HashFind(pHash, zName, nName+1); - - if( !p ){ - char *zErr = sqlite3_mprintf("unknown tokenizer: %s", zName); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); - return; - } - - pRet = Tcl_NewObj(); - Tcl_IncrRefCount(pRet); + int rc; /* Return Code */ + sqlite3_stmt *pNextIdx; /* Query for next idx at level iLevel */ + int iNext = 0; /* Result of query pNextIdx */ - if( SQLITE_OK!=p->xCreate(zArg ? 1 : 0, &zArg, &pTokenizer) ){ - zErr = "error in xCreate()"; - goto finish; - } - pTokenizer->pModule = p; - if( SQLITE_OK!=p->xOpen(pTokenizer, zInput, nInput, &pCsr) ){ - zErr = "error in xOpen()"; - goto finish; - } - pCsr->pTokenizer = pTokenizer; + assert( iLangid>=0 ); + assert( p->nIndex>=1 ); - while( SQLITE_OK==p->xNext(pCsr, &zToken, &nToken, &iStart, &iEnd, &iPos) ){ - Tcl_ListObjAppendElement(0, pRet, Tcl_NewIntObj(iPos)); - Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zToken, nToken)); - zToken = &zInput[iStart]; - nToken = iEnd-iStart; - Tcl_ListObjAppendElement(0, pRet, Tcl_NewStringObj(zToken, nToken)); + /* Set variable iNext to the next available segdir index at level iLevel. */ + rc = fts3SqlStmt(p, SQL_NEXT_SEGMENT_INDEX, &pNextIdx, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64( + pNextIdx, 1, getAbsoluteLevel(p, iLangid, iIndex, iLevel) + ); + if( SQLITE_ROW==sqlite3_step(pNextIdx) ){ + iNext = sqlite3_column_int(pNextIdx, 0); + } + rc = sqlite3_reset(pNextIdx); } - if( SQLITE_OK!=p->xClose(pCsr) ){ - zErr = "error in xClose()"; - goto finish; - } - if( SQLITE_OK!=p->xDestroy(pTokenizer) ){ - zErr = "error in xDestroy()"; - goto finish; + if( rc==SQLITE_OK ){ + /* If iNext is FTS3_MERGE_COUNT, indicating that level iLevel is already + ** full, merge all segments in level iLevel into a single iLevel+1 + ** segment and allocate (newly freed) index 0 at level iLevel. Otherwise, + ** if iNext is less than FTS3_MERGE_COUNT, allocate index iNext. + */ + if( iNext>=FTS3_MERGE_COUNT ){ + fts3LogMerge(16, getAbsoluteLevel(p, iLangid, iIndex, iLevel)); + rc = fts3SegmentMerge(p, iLangid, iIndex, iLevel); + *piIdx = 0; + }else{ + *piIdx = iNext; + } } -finish: - if( zErr ){ - sqlite3_result_error(context, zErr, -1); - }else{ - sqlite3_result_text(context, Tcl_GetString(pRet), -1, SQLITE_TRANSIENT); - } - Tcl_DecrRefCount(pRet); + return rc; } -static -int registerTokenizer( - sqlite3 *db, - char *zName, - const sqlite3_tokenizer_module *p +/* +** The %_segments table is declared as follows: +** +** CREATE TABLE %_segments(blockid INTEGER PRIMARY KEY, block BLOB) +** +** This function reads data from a single row of the %_segments table. The +** specific row is identified by the iBlockid parameter. If paBlob is not +** NULL, then a buffer is allocated using sqlite3_malloc() and populated +** with the contents of the blob stored in the "block" column of the +** identified table row is. Whether or not paBlob is NULL, *pnBlob is set +** to the size of the blob in bytes before returning. +** +** If an error occurs, or the table does not contain the specified row, +** an SQLite error code is returned. Otherwise, SQLITE_OK is returned. If +** paBlob is non-NULL, then it is the responsibility of the caller to +** eventually free the returned buffer. +** +** This function may leave an open sqlite3_blob* handle in the +** Fts3Table.pSegments variable. This handle is reused by subsequent calls +** to this function. The handle may be closed by calling the +** sqlite3Fts3SegmentsClose() function. Reusing a blob handle is a handy +** performance improvement, but the blob handle should always be closed +** before control is returned to the user (to prevent a lock being held +** on the database file for longer than necessary). Thus, any virtual table +** method (xFilter etc.) that may directly or indirectly call this function +** must call sqlite3Fts3SegmentsClose() before returning. +*/ +SQLITE_PRIVATE int sqlite3Fts3ReadBlock( + Fts3Table *p, /* FTS3 table handle */ + sqlite3_int64 iBlockid, /* Access the row with blockid=$iBlockid */ + char **paBlob, /* OUT: Blob data in malloc'd buffer */ + int *pnBlob, /* OUT: Size of blob data */ + int *pnLoad /* OUT: Bytes actually loaded */ ){ - int rc; - sqlite3_stmt *pStmt; - const char zSql[] = "SELECT fts3_tokenizer(?, ?)"; + int rc; /* Return code */ + + /* pnBlob must be non-NULL. paBlob may be NULL or non-NULL. */ + assert( pnBlob ); - rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); - if( rc!=SQLITE_OK ){ - return rc; + if( p->pSegments ){ + rc = sqlite3_blob_reopen(p->pSegments, iBlockid); + }else{ + if( 0==p->zSegmentsTbl ){ + p->zSegmentsTbl = sqlite3_mprintf("%s_segments", p->zName); + if( 0==p->zSegmentsTbl ) return SQLITE_NOMEM; + } + rc = sqlite3_blob_open( + p->db, p->zDb, p->zSegmentsTbl, "block", iBlockid, 0, &p->pSegments + ); } - sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); - sqlite3_bind_blob(pStmt, 2, &p, sizeof(p), SQLITE_STATIC); - sqlite3_step(pStmt); + if( rc==SQLITE_OK ){ + int nByte = sqlite3_blob_bytes(p->pSegments); + *pnBlob = nByte; + if( paBlob ){ + char *aByte = sqlite3_malloc(nByte + FTS3_NODE_PADDING); + if( !aByte ){ + rc = SQLITE_NOMEM; + }else{ + if( pnLoad && nByte>(FTS3_NODE_CHUNK_THRESHOLD) ){ + nByte = FTS3_NODE_CHUNKSIZE; + *pnLoad = nByte; + } + rc = sqlite3_blob_read(p->pSegments, aByte, nByte, 0); + memset(&aByte[nByte], 0, FTS3_NODE_PADDING); + if( rc!=SQLITE_OK ){ + sqlite3_free(aByte); + aByte = 0; + } + } + *paBlob = aByte; + } + } - return sqlite3_finalize(pStmt); + return rc; } -static -int queryTokenizer( - sqlite3 *db, - char *zName, - const sqlite3_tokenizer_module **pp -){ - int rc; - sqlite3_stmt *pStmt; - const char zSql[] = "SELECT fts3_tokenizer(?)"; +/* +** Close the blob handle at p->pSegments, if it is open. See comments above +** the sqlite3Fts3ReadBlock() function for details. +*/ +SQLITE_PRIVATE void sqlite3Fts3SegmentsClose(Fts3Table *p){ + sqlite3_blob_close(p->pSegments); + p->pSegments = 0; +} + +static int fts3SegReaderIncrRead(Fts3SegReader *pReader){ + int nRead; /* Number of bytes to read */ + int rc; /* Return code */ - *pp = 0; - rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); - if( rc!=SQLITE_OK ){ - return rc; - } + nRead = MIN(pReader->nNode - pReader->nPopulate, FTS3_NODE_CHUNKSIZE); + rc = sqlite3_blob_read( + pReader->pBlob, + &pReader->aNode[pReader->nPopulate], + nRead, + pReader->nPopulate + ); - sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){ - memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp)); + if( rc==SQLITE_OK ){ + pReader->nPopulate += nRead; + memset(&pReader->aNode[pReader->nPopulate], 0, FTS3_NODE_PADDING); + if( pReader->nPopulate==pReader->nNode ){ + sqlite3_blob_close(pReader->pBlob); + pReader->pBlob = 0; + pReader->nPopulate = 0; } } + return rc; +} - return sqlite3_finalize(pStmt); +static int fts3SegReaderRequire(Fts3SegReader *pReader, char *pFrom, int nByte){ + int rc = SQLITE_OK; + assert( !pReader->pBlob + || (pFrom>=pReader->aNode && pFrom<&pReader->aNode[pReader->nNode]) + ); + while( pReader->pBlob && rc==SQLITE_OK + && (pFrom - pReader->aNode + nByte)>pReader->nPopulate + ){ + rc = fts3SegReaderIncrRead(pReader); + } + return rc; } -SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule); +/* +** Set an Fts3SegReader cursor to point at EOF. +*/ +static void fts3SegReaderSetEof(Fts3SegReader *pSeg){ + if( !fts3SegReaderIsRootOnly(pSeg) ){ + sqlite3_free(pSeg->aNode); + sqlite3_blob_close(pSeg->pBlob); + pSeg->pBlob = 0; + } + pSeg->aNode = 0; +} /* -** Implementation of the scalar function fts3_tokenizer_internal_test(). -** This function is used for testing only, it is not included in the -** build unless SQLITE_TEST is defined. -** -** The purpose of this is to test that the fts3_tokenizer() function -** can be used as designed by the C-code in the queryTokenizer and -** registerTokenizer() functions above. These two functions are repeated -** in the README.tokenizer file as an example, so it is important to -** test them. -** -** To run the tests, evaluate the fts3_tokenizer_internal_test() scalar -** function with no arguments. An assert() will fail if a problem is -** detected. i.e.: -** -** SELECT fts3_tokenizer_internal_test(); -** +** Move the iterator passed as the first argument to the next term in the +** segment. If successful, SQLITE_OK is returned. If there is no next term, +** SQLITE_DONE. Otherwise, an SQLite error code. */ -static void intTestFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv +static int fts3SegReaderNext( + Fts3Table *p, + Fts3SegReader *pReader, + int bIncr ){ - int rc; - const sqlite3_tokenizer_module *p1; - const sqlite3_tokenizer_module *p2; - sqlite3 *db = (sqlite3 *)sqlite3_user_data(context); - - UNUSED_PARAMETER(argc); - UNUSED_PARAMETER(argv); + int rc; /* Return code of various sub-routines */ + char *pNext; /* Cursor variable */ + int nPrefix; /* Number of bytes in term prefix */ + int nSuffix; /* Number of bytes in term suffix */ - /* Test the query function */ - sqlite3Fts3SimpleTokenizerModule(&p1); - rc = queryTokenizer(db, "simple", &p2); - assert( rc==SQLITE_OK ); - assert( p1==p2 ); - rc = queryTokenizer(db, "nosuchtokenizer", &p2); - assert( rc==SQLITE_ERROR ); - assert( p2==0 ); - assert( 0==strcmp(sqlite3_errmsg(db), "unknown tokenizer: nosuchtokenizer") ); + if( !pReader->aDoclist ){ + pNext = pReader->aNode; + }else{ + pNext = &pReader->aDoclist[pReader->nDoclist]; + } - /* Test the storage function */ - rc = registerTokenizer(db, "nosuchtokenizer", p1); - assert( rc==SQLITE_OK ); - rc = queryTokenizer(db, "nosuchtokenizer", &p2); - assert( rc==SQLITE_OK ); - assert( p2==p1 ); + if( !pNext || pNext>=&pReader->aNode[pReader->nNode] ){ - sqlite3_result_text(context, "ok", -1, SQLITE_STATIC); -} + if( fts3SegReaderIsPending(pReader) ){ + Fts3HashElem *pElem = *(pReader->ppNextElem); + if( pElem==0 ){ + pReader->aNode = 0; + }else{ + PendingList *pList = (PendingList *)fts3HashData(pElem); + pReader->zTerm = (char *)fts3HashKey(pElem); + pReader->nTerm = fts3HashKeysize(pElem); + pReader->nNode = pReader->nDoclist = pList->nData + 1; + pReader->aNode = pReader->aDoclist = pList->aData; + pReader->ppNextElem++; + assert( pReader->aNode ); + } + return SQLITE_OK; + } -#endif + fts3SegReaderSetEof(pReader); -/* -** Set up SQL objects in database db used to access the contents of -** the hash table pointed to by argument pHash. The hash table must -** been initialised to use string keys, and to take a private copy -** of the key when a value is inserted. i.e. by a call similar to: -** -** sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1); -** -** This function adds a scalar function (see header comment above -** scalarFunc() in this file for details) and, if ENABLE_TABLE is -** defined at compilation time, a temporary virtual table (see header -** comment above struct HashTableVtab) to the database schema. Both -** provide read/write access to the contents of *pHash. -** -** The third argument to this function, zName, is used as the name -** of both the scalar and, if created, the virtual table. -*/ -SQLITE_PRIVATE int sqlite3Fts3InitHashTable( - sqlite3 *db, - Fts3Hash *pHash, - const char *zName -){ - int rc = SQLITE_OK; - void *p = (void *)pHash; - const int any = SQLITE_ANY; + /* If iCurrentBlock>=iLeafEndBlock, this is an EOF condition. All leaf + ** blocks have already been traversed. */ + assert( pReader->iCurrentBlock<=pReader->iLeafEndBlock ); + if( pReader->iCurrentBlock>=pReader->iLeafEndBlock ){ + return SQLITE_OK; + } -#ifdef SQLITE_TEST - char *zTest = 0; - char *zTest2 = 0; - void *pdb = (void *)db; - zTest = sqlite3_mprintf("%s_test", zName); - zTest2 = sqlite3_mprintf("%s_internal_test", zName); - if( !zTest || !zTest2 ){ - rc = SQLITE_NOMEM; + rc = sqlite3Fts3ReadBlock( + p, ++pReader->iCurrentBlock, &pReader->aNode, &pReader->nNode, + (bIncr ? &pReader->nPopulate : 0) + ); + if( rc!=SQLITE_OK ) return rc; + assert( pReader->pBlob==0 ); + if( bIncr && pReader->nPopulatenNode ){ + pReader->pBlob = p->pSegments; + p->pSegments = 0; + } + pNext = pReader->aNode; } -#endif - if( SQLITE_OK==rc ){ - rc = sqlite3_create_function(db, zName, 1, any, p, scalarFunc, 0, 0); - } - if( SQLITE_OK==rc ){ - rc = sqlite3_create_function(db, zName, 2, any, p, scalarFunc, 0, 0); - } -#ifdef SQLITE_TEST - if( SQLITE_OK==rc ){ - rc = sqlite3_create_function(db, zTest, 2, any, p, testFunc, 0, 0); - } - if( SQLITE_OK==rc ){ - rc = sqlite3_create_function(db, zTest, 3, any, p, testFunc, 0, 0); + assert( !fts3SegReaderIsPending(pReader) ); + + rc = fts3SegReaderRequire(pReader, pNext, FTS3_VARINT_MAX*2); + if( rc!=SQLITE_OK ) return rc; + + /* Because of the FTS3_NODE_PADDING bytes of padding, the following is + ** safe (no risk of overread) even if the node data is corrupted. */ + pNext += fts3GetVarint32(pNext, &nPrefix); + pNext += fts3GetVarint32(pNext, &nSuffix); + if( nPrefix<0 || nSuffix<=0 + || &pNext[nSuffix]>&pReader->aNode[pReader->nNode] + ){ + return FTS_CORRUPT_VTAB; } - if( SQLITE_OK==rc ){ - rc = sqlite3_create_function(db, zTest2, 0, any, pdb, intTestFunc, 0, 0); + + if( nPrefix+nSuffix>pReader->nTermAlloc ){ + int nNew = (nPrefix+nSuffix)*2; + char *zNew = sqlite3_realloc(pReader->zTerm, nNew); + if( !zNew ){ + return SQLITE_NOMEM; + } + pReader->zTerm = zNew; + pReader->nTermAlloc = nNew; } -#endif -#ifdef SQLITE_TEST - sqlite3_free(zTest); - sqlite3_free(zTest2); -#endif + rc = fts3SegReaderRequire(pReader, pNext, nSuffix+FTS3_VARINT_MAX); + if( rc!=SQLITE_OK ) return rc; - return rc; -} + memcpy(&pReader->zTerm[nPrefix], pNext, nSuffix); + pReader->nTerm = nPrefix+nSuffix; + pNext += nSuffix; + pNext += fts3GetVarint32(pNext, &pReader->nDoclist); + pReader->aDoclist = pNext; + pReader->pOffsetList = 0; -#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ + /* Check that the doclist does not appear to extend past the end of the + ** b-tree node. And that the final byte of the doclist is 0x00. If either + ** of these statements is untrue, then the data structure is corrupt. + */ + if( &pReader->aDoclist[pReader->nDoclist]>&pReader->aNode[pReader->nNode] + || (pReader->nPopulate==0 && pReader->aDoclist[pReader->nDoclist-1]) + ){ + return FTS_CORRUPT_VTAB; + } + return SQLITE_OK; +} -/************** End of fts3_tokenizer.c **************************************/ -/************** Begin file fts3_tokenizer1.c *********************************/ /* -** 2006 Oct 10 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** Implementation of the "simple" full-text-search tokenizer. +** Set the SegReader to point to the first docid in the doclist associated +** with the current term. */ +static int fts3SegReaderFirstDocid(Fts3Table *pTab, Fts3SegReader *pReader){ + int rc = SQLITE_OK; + assert( pReader->aDoclist ); + assert( !pReader->pOffsetList ); + if( pTab->bDescIdx && fts3SegReaderIsPending(pReader) ){ + u8 bEof = 0; + pReader->iDocid = 0; + pReader->nOffsetList = 0; + sqlite3Fts3DoclistPrev(0, + pReader->aDoclist, pReader->nDoclist, &pReader->pOffsetList, + &pReader->iDocid, &pReader->nOffsetList, &bEof + ); + }else{ + rc = fts3SegReaderRequire(pReader, pReader->aDoclist, FTS3_VARINT_MAX); + if( rc==SQLITE_OK ){ + int n = sqlite3Fts3GetVarint(pReader->aDoclist, &pReader->iDocid); + pReader->pOffsetList = &pReader->aDoclist[n]; + } + } + return rc; +} /* -** The code in this file is only compiled if: -** -** * The FTS3 module is being built as an extension -** (in which case SQLITE_CORE is not defined), or -** -** * The FTS3 module is being built into the core of -** SQLite (in which case SQLITE_ENABLE_FTS3 is defined). +** Advance the SegReader to point to the next docid in the doclist +** associated with the current term. +** +** If arguments ppOffsetList and pnOffsetList are not NULL, then +** *ppOffsetList is set to point to the first column-offset list +** in the doclist entry (i.e. immediately past the docid varint). +** *pnOffsetList is set to the length of the set of column-offset +** lists, not including the nul-terminator byte. For example: */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - +static int fts3SegReaderNextDocid( + Fts3Table *pTab, + Fts3SegReader *pReader, /* Reader to advance to next docid */ + char **ppOffsetList, /* OUT: Pointer to current position-list */ + int *pnOffsetList /* OUT: Length of *ppOffsetList in bytes */ +){ + int rc = SQLITE_OK; + char *p = pReader->pOffsetList; + char c = 0; + assert( p ); -typedef struct simple_tokenizer { - sqlite3_tokenizer base; - char delim[128]; /* flag ASCII delimiters */ -} simple_tokenizer; + if( pTab->bDescIdx && fts3SegReaderIsPending(pReader) ){ + /* A pending-terms seg-reader for an FTS4 table that uses order=desc. + ** Pending-terms doclists are always built up in ascending order, so + ** we have to iterate through them backwards here. */ + u8 bEof = 0; + if( ppOffsetList ){ + *ppOffsetList = pReader->pOffsetList; + *pnOffsetList = pReader->nOffsetList - 1; + } + sqlite3Fts3DoclistPrev(0, + pReader->aDoclist, pReader->nDoclist, &p, &pReader->iDocid, + &pReader->nOffsetList, &bEof + ); + if( bEof ){ + pReader->pOffsetList = 0; + }else{ + pReader->pOffsetList = p; + } + }else{ + char *pEnd = &pReader->aDoclist[pReader->nDoclist]; -typedef struct simple_tokenizer_cursor { - sqlite3_tokenizer_cursor base; - const char *pInput; /* input we are tokenizing */ - int nBytes; /* size of the input */ - int iOffset; /* current position in pInput */ - int iToken; /* index of next token to be returned */ - char *pToken; /* storage for current token */ - int nTokenAllocated; /* space allocated to zToken buffer */ -} simple_tokenizer_cursor; + /* Pointer p currently points at the first byte of an offset list. The + ** following block advances it to point one byte past the end of + ** the same offset list. */ + while( 1 ){ + + /* The following line of code (and the "p++" below the while() loop) is + ** normally all that is required to move pointer p to the desired + ** position. The exception is if this node is being loaded from disk + ** incrementally and pointer "p" now points to the first byte past + ** the populated part of pReader->aNode[]. + */ + while( *p | c ) c = *p++ & 0x80; + assert( *p==0 ); + + if( pReader->pBlob==0 || p<&pReader->aNode[pReader->nPopulate] ) break; + rc = fts3SegReaderIncrRead(pReader); + if( rc!=SQLITE_OK ) return rc; + } + p++; + + /* If required, populate the output variables with a pointer to and the + ** size of the previous offset-list. + */ + if( ppOffsetList ){ + *ppOffsetList = pReader->pOffsetList; + *pnOffsetList = (int)(p - pReader->pOffsetList - 1); + } + /* List may have been edited in place by fts3EvalNearTrim() */ + while( p=pEnd ){ + pReader->pOffsetList = 0; + }else{ + rc = fts3SegReaderRequire(pReader, p, FTS3_VARINT_MAX); + if( rc==SQLITE_OK ){ + sqlite3_int64 iDelta; + pReader->pOffsetList = p + sqlite3Fts3GetVarint(p, &iDelta); + if( pTab->bDescIdx ){ + pReader->iDocid -= iDelta; + }else{ + pReader->iDocid += iDelta; + } + } + } + } -static int simpleDelim(simple_tokenizer *t, unsigned char c){ - return c<0x80 && t->delim[c]; -} -static int fts3_isalnum(int x){ - return (x>='0' && x<='9') || (x>='A' && x<='Z') || (x>='a' && x<='z'); + return SQLITE_OK; } -/* -** Create a new tokenizer instance. -*/ -static int simpleCreate( - int argc, const char * const *argv, - sqlite3_tokenizer **ppTokenizer + +SQLITE_PRIVATE int sqlite3Fts3MsrOvfl( + Fts3Cursor *pCsr, + Fts3MultiSegReader *pMsr, + int *pnOvfl ){ - simple_tokenizer *t; + Fts3Table *p = (Fts3Table*)pCsr->base.pVtab; + int nOvfl = 0; + int ii; + int rc = SQLITE_OK; + int pgsz = p->nPgsz; - t = (simple_tokenizer *) sqlite3_malloc(sizeof(*t)); - if( t==NULL ) return SQLITE_NOMEM; - memset(t, 0, sizeof(*t)); + assert( p->bFts4 ); + assert( pgsz>0 ); - /* TODO(shess) Delimiters need to remain the same from run to run, - ** else we need to reindex. One solution would be a meta-table to - ** track such information in the database, then we'd only want this - ** information on the initial create. - */ - if( argc>1 ){ - int i, n = (int)strlen(argv[1]); - for(i=0; i=0x80 ){ - sqlite3_free(t); - return SQLITE_ERROR; + for(ii=0; rc==SQLITE_OK && iinSegment; ii++){ + Fts3SegReader *pReader = pMsr->apSegment[ii]; + if( !fts3SegReaderIsPending(pReader) + && !fts3SegReaderIsRootOnly(pReader) + ){ + sqlite3_int64 jj; + for(jj=pReader->iStartBlock; jj<=pReader->iLeafEndBlock; jj++){ + int nBlob; + rc = sqlite3Fts3ReadBlock(p, jj, 0, &nBlob, 0); + if( rc!=SQLITE_OK ) break; + if( (nBlob+35)>pgsz ){ + nOvfl += (nBlob + 34)/pgsz; + } } - t->delim[ch] = 1; - } - } else { - /* Mark non-alphanumeric ASCII characters as delimiters */ - int i; - for(i=1; i<0x80; i++){ - t->delim[i] = !fts3_isalnum(i) ? -1 : 0; } } - - *ppTokenizer = &t->base; - return SQLITE_OK; + *pnOvfl = nOvfl; + return rc; } /* -** Destroy a tokenizer +** Free all allocations associated with the iterator passed as the +** second argument. */ -static int simpleDestroy(sqlite3_tokenizer *pTokenizer){ - sqlite3_free(pTokenizer); - return SQLITE_OK; +SQLITE_PRIVATE void sqlite3Fts3SegReaderFree(Fts3SegReader *pReader){ + if( pReader && !fts3SegReaderIsPending(pReader) ){ + sqlite3_free(pReader->zTerm); + if( !fts3SegReaderIsRootOnly(pReader) ){ + sqlite3_free(pReader->aNode); + sqlite3_blob_close(pReader->pBlob); + } + } + sqlite3_free(pReader); } /* -** Prepare to begin tokenizing a particular string. The input -** string to be tokenized is pInput[0..nBytes-1]. A cursor -** used to incrementally tokenize this string is returned in -** *ppCursor. +** Allocate a new SegReader object. */ -static int simpleOpen( - sqlite3_tokenizer *pTokenizer, /* The tokenizer */ - const char *pInput, int nBytes, /* String to be tokenized */ - sqlite3_tokenizer_cursor **ppCursor /* OUT: Tokenization cursor */ +SQLITE_PRIVATE int sqlite3Fts3SegReaderNew( + int iAge, /* Segment "age". */ + int bLookup, /* True for a lookup only */ + sqlite3_int64 iStartLeaf, /* First leaf to traverse */ + sqlite3_int64 iEndLeaf, /* Final leaf to traverse */ + sqlite3_int64 iEndBlock, /* Final block of segment */ + const char *zRoot, /* Buffer containing root node */ + int nRoot, /* Size of buffer containing root node */ + Fts3SegReader **ppReader /* OUT: Allocated Fts3SegReader */ ){ - simple_tokenizer_cursor *c; + Fts3SegReader *pReader; /* Newly allocated SegReader object */ + int nExtra = 0; /* Bytes to allocate segment root node */ - UNUSED_PARAMETER(pTokenizer); + assert( iStartLeaf<=iEndLeaf ); + if( iStartLeaf==0 ){ + nExtra = nRoot + FTS3_NODE_PADDING; + } - c = (simple_tokenizer_cursor *) sqlite3_malloc(sizeof(*c)); - if( c==NULL ) return SQLITE_NOMEM; + pReader = (Fts3SegReader *)sqlite3_malloc(sizeof(Fts3SegReader) + nExtra); + if( !pReader ){ + return SQLITE_NOMEM; + } + memset(pReader, 0, sizeof(Fts3SegReader)); + pReader->iIdx = iAge; + pReader->bLookup = bLookup!=0; + pReader->iStartBlock = iStartLeaf; + pReader->iLeafEndBlock = iEndLeaf; + pReader->iEndBlock = iEndBlock; - c->pInput = pInput; - if( pInput==0 ){ - c->nBytes = 0; - }else if( nBytes<0 ){ - c->nBytes = (int)strlen(pInput); + if( nExtra ){ + /* The entire segment is stored in the root node. */ + pReader->aNode = (char *)&pReader[1]; + pReader->rootOnly = 1; + pReader->nNode = nRoot; + memcpy(pReader->aNode, zRoot, nRoot); + memset(&pReader->aNode[nRoot], 0, FTS3_NODE_PADDING); }else{ - c->nBytes = nBytes; + pReader->iCurrentBlock = iStartLeaf-1; } - c->iOffset = 0; /* start tokenizing at the beginning */ - c->iToken = 0; - c->pToken = NULL; /* no space allocated, yet. */ - c->nTokenAllocated = 0; - - *ppCursor = &c->base; + *ppReader = pReader; return SQLITE_OK; } /* -** Close a tokenization cursor previously opened by a call to -** simpleOpen() above. +** This is a comparison function used as a qsort() callback when sorting +** an array of pending terms by term. This occurs as part of flushing +** the contents of the pending-terms hash table to the database. */ -static int simpleClose(sqlite3_tokenizer_cursor *pCursor){ - simple_tokenizer_cursor *c = (simple_tokenizer_cursor *) pCursor; - sqlite3_free(c->pToken); - sqlite3_free(c); - return SQLITE_OK; +static int fts3CompareElemByTerm(const void *lhs, const void *rhs){ + char *z1 = fts3HashKey(*(Fts3HashElem **)lhs); + char *z2 = fts3HashKey(*(Fts3HashElem **)rhs); + int n1 = fts3HashKeysize(*(Fts3HashElem **)lhs); + int n2 = fts3HashKeysize(*(Fts3HashElem **)rhs); + + int n = (n1aIndex */ + const char *zTerm, /* Term to search for */ + int nTerm, /* Size of buffer zTerm */ + int bPrefix, /* True for a prefix iterator */ + Fts3SegReader **ppReader /* OUT: SegReader for pending-terms */ ){ - simple_tokenizer_cursor *c = (simple_tokenizer_cursor *) pCursor; - simple_tokenizer *t = (simple_tokenizer *) pCursor->pTokenizer; - unsigned char *p = (unsigned char *)c->pInput; + Fts3SegReader *pReader = 0; /* Fts3SegReader object to return */ + Fts3HashElem *pE; /* Iterator variable */ + Fts3HashElem **aElem = 0; /* Array of term hash entries to scan */ + int nElem = 0; /* Size of array at aElem */ + int rc = SQLITE_OK; /* Return Code */ + Fts3Hash *pHash; - while( c->iOffsetnBytes ){ - int iStartOffset; + pHash = &p->aIndex[iIndex].hPending; + if( bPrefix ){ + int nAlloc = 0; /* Size of allocated array at aElem */ - /* Scan past delimiter characters */ - while( c->iOffsetnBytes && simpleDelim(t, p[c->iOffset]) ){ - c->iOffset++; - } + for(pE=fts3HashFirst(pHash); pE; pE=fts3HashNext(pE)){ + char *zKey = (char *)fts3HashKey(pE); + int nKey = fts3HashKeysize(pE); + if( nTerm==0 || (nKey>=nTerm && 0==memcmp(zKey, zTerm, nTerm)) ){ + if( nElem==nAlloc ){ + Fts3HashElem **aElem2; + nAlloc += 16; + aElem2 = (Fts3HashElem **)sqlite3_realloc( + aElem, nAlloc*sizeof(Fts3HashElem *) + ); + if( !aElem2 ){ + rc = SQLITE_NOMEM; + nElem = 0; + break; + } + aElem = aElem2; + } - /* Count non-delimiter characters. */ - iStartOffset = c->iOffset; - while( c->iOffsetnBytes && !simpleDelim(t, p[c->iOffset]) ){ - c->iOffset++; + aElem[nElem++] = pE; + } } - if( c->iOffset>iStartOffset ){ - int i, n = c->iOffset-iStartOffset; - if( n>c->nTokenAllocated ){ - char *pNew; - c->nTokenAllocated = n+20; - pNew = sqlite3_realloc(c->pToken, c->nTokenAllocated); - if( !pNew ) return SQLITE_NOMEM; - c->pToken = pNew; - } - for(i=0; ipToken[i] = (char)((ch>='A' && ch<='Z') ? ch-'A'+'a' : ch); - } - *ppToken = c->pToken; - *pnBytes = n; - *piStartOffset = iStartOffset; - *piEndOffset = c->iOffset; - *piPosition = c->iToken++; + /* If more than one term matches the prefix, sort the Fts3HashElem + ** objects in term order using qsort(). This uses the same comparison + ** callback as is used when flushing terms to disk. + */ + if( nElem>1 ){ + qsort(aElem, nElem, sizeof(Fts3HashElem *), fts3CompareElemByTerm); + } - return SQLITE_OK; + }else{ + /* The query is a simple term lookup that matches at most one term in + ** the index. All that is required is a straight hash-lookup. + ** + ** Because the stack address of pE may be accessed via the aElem pointer + ** below, the "Fts3HashElem *pE" must be declared so that it is valid + ** within this entire function, not just this "else{...}" block. + */ + pE = fts3HashFindElem(pHash, zTerm, nTerm); + if( pE ){ + aElem = &pE; + nElem = 1; } } - return SQLITE_DONE; -} -/* -** The set of routines that implement the simple tokenizer -*/ -static const sqlite3_tokenizer_module simpleTokenizerModule = { - 0, - simpleCreate, - simpleDestroy, - simpleOpen, - simpleClose, - simpleNext, -}; + if( nElem>0 ){ + int nByte = sizeof(Fts3SegReader) + (nElem+1)*sizeof(Fts3HashElem *); + pReader = (Fts3SegReader *)sqlite3_malloc(nByte); + if( !pReader ){ + rc = SQLITE_NOMEM; + }else{ + memset(pReader, 0, nByte); + pReader->iIdx = 0x7FFFFFFF; + pReader->ppNextElem = (Fts3HashElem **)&pReader[1]; + memcpy(pReader->ppNextElem, aElem, nElem*sizeof(Fts3HashElem *)); + } + } -/* -** Allocate a new simple tokenizer. Return a pointer to the new -** tokenizer in *ppModule -*/ -SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule( - sqlite3_tokenizer_module const**ppModule -){ - *ppModule = &simpleTokenizerModule; + if( bPrefix ){ + sqlite3_free(aElem); + } + *ppReader = pReader; + return rc; } -#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ - -/************** End of fts3_tokenizer1.c *************************************/ -/************** Begin file fts3_write.c **************************************/ /* -** 2009 Oct 23 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: +** Compare the entries pointed to by two Fts3SegReader structures. +** Comparison is as follows: ** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. +** 1) EOF is greater than not EOF. ** -****************************************************************************** +** 2) The current terms (if any) are compared using memcmp(). If one +** term is a prefix of another, the longer term is considered the +** larger. ** -** This file is part of the SQLite FTS3 extension module. Specifically, -** this file contains code to insert, update and delete rows from FTS3 -** tables. It also contains code to merge FTS3 b-tree segments. Some -** of the sub-routines used to merge segments are also used by the query -** code in fts3.c. +** 3) By segment age. An older segment is considered larger. */ - -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) - +static int fts3SegReaderCmp(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ + int rc; + if( pLhs->aNode && pRhs->aNode ){ + int rc2 = pLhs->nTerm - pRhs->nTerm; + if( rc2<0 ){ + rc = memcmp(pLhs->zTerm, pRhs->zTerm, pLhs->nTerm); + }else{ + rc = memcmp(pLhs->zTerm, pRhs->zTerm, pRhs->nTerm); + } + if( rc==0 ){ + rc = rc2; + } + }else{ + rc = (pLhs->aNode==0) - (pRhs->aNode==0); + } + if( rc==0 ){ + rc = pRhs->iIdx - pLhs->iIdx; + } + assert( rc!=0 ); + return rc; +} /* -** When full-text index nodes are loaded from disk, the buffer that they -** are loaded into has the following number of bytes of padding at the end -** of it. i.e. if a full-text index node is 900 bytes in size, then a buffer -** of 920 bytes is allocated for it. +** A different comparison function for SegReader structures. In this +** version, it is assumed that each SegReader points to an entry in +** a doclist for identical terms. Comparison is made as follows: ** -** This means that if we have a pointer into a buffer containing node data, -** it is always safe to read up to two varints from it without risking an -** overread, even if the node data is corrupted. -*/ -#define FTS3_NODE_PADDING (FTS3_VARINT_MAX*2) - -/* -** Under certain circumstances, b-tree nodes (doclists) can be loaded into -** memory incrementally instead of all at once. This can be a big performance -** win (reduced IO and CPU) if SQLite stops calling the virtual table xNext() -** method before retrieving all query results (as may happen, for example, -** if a query has a LIMIT clause). +** 1) EOF (end of doclist in this case) is greater than not EOF. ** -** Incremental loading is used for b-tree nodes FTS3_NODE_CHUNK_THRESHOLD -** bytes and larger. Nodes are loaded in chunks of FTS3_NODE_CHUNKSIZE bytes. -** The code is written so that the hard lower-limit for each of these values -** is 1. Clearly such small values would be inefficient, but can be useful -** for testing purposes. +** 2) By current docid. ** -** If this module is built with SQLITE_TEST defined, these constants may -** be overridden at runtime for testing purposes. File fts3_test.c contains -** a Tcl interface to read and write the values. -*/ -#ifdef SQLITE_TEST -int test_fts3_node_chunksize = (4*1024); -int test_fts3_node_chunk_threshold = (4*1024)*4; -# define FTS3_NODE_CHUNKSIZE test_fts3_node_chunksize -# define FTS3_NODE_CHUNK_THRESHOLD test_fts3_node_chunk_threshold -#else -# define FTS3_NODE_CHUNKSIZE (4*1024) -# define FTS3_NODE_CHUNK_THRESHOLD (FTS3_NODE_CHUNKSIZE*4) -#endif - -typedef struct PendingList PendingList; -typedef struct SegmentNode SegmentNode; -typedef struct SegmentWriter SegmentWriter; - -/* -** An instance of the following data structure is used to build doclists -** incrementally. See function fts3PendingListAppend() for details. +** 3) By segment age. An older segment is considered larger. */ -struct PendingList { - int nData; - char *aData; - int nSpace; - sqlite3_int64 iLastDocid; - sqlite3_int64 iLastCol; - sqlite3_int64 iLastPos; -}; - +static int fts3SegReaderDoclistCmp(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ + int rc = (pLhs->pOffsetList==0)-(pRhs->pOffsetList==0); + if( rc==0 ){ + if( pLhs->iDocid==pRhs->iDocid ){ + rc = pRhs->iIdx - pLhs->iIdx; + }else{ + rc = (pLhs->iDocid > pRhs->iDocid) ? 1 : -1; + } + } + assert( pLhs->aNode && pRhs->aNode ); + return rc; +} +static int fts3SegReaderDoclistCmpRev(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ + int rc = (pLhs->pOffsetList==0)-(pRhs->pOffsetList==0); + if( rc==0 ){ + if( pLhs->iDocid==pRhs->iDocid ){ + rc = pRhs->iIdx - pLhs->iIdx; + }else{ + rc = (pLhs->iDocid < pRhs->iDocid) ? 1 : -1; + } + } + assert( pLhs->aNode && pRhs->aNode ); + return rc; +} /* -** Each cursor has a (possibly empty) linked list of the following objects. +** Compare the term that the Fts3SegReader object passed as the first argument +** points to with the term specified by arguments zTerm and nTerm. +** +** If the pSeg iterator is already at EOF, return 0. Otherwise, return +** -ve if the pSeg term is less than zTerm/nTerm, 0 if the two terms are +** equal, or +ve if the pSeg term is greater than zTerm/nTerm. */ -struct Fts3DeferredToken { - Fts3PhraseToken *pToken; /* Pointer to corresponding expr token */ - int iCol; /* Column token must occur in */ - Fts3DeferredToken *pNext; /* Next in list of deferred tokens */ - PendingList *pList; /* Doclist is assembled here */ -}; +static int fts3SegReaderTermCmp( + Fts3SegReader *pSeg, /* Segment reader object */ + const char *zTerm, /* Term to compare to */ + int nTerm /* Size of term zTerm in bytes */ +){ + int res = 0; + if( pSeg->aNode ){ + if( pSeg->nTerm>nTerm ){ + res = memcmp(pSeg->zTerm, zTerm, nTerm); + }else{ + res = memcmp(pSeg->zTerm, zTerm, pSeg->nTerm); + } + if( res==0 ){ + res = pSeg->nTerm-nTerm; + } + } + return res; +} /* -** An instance of this structure is used to iterate through the terms on -** a contiguous set of segment b-tree leaf nodes. Although the details of -** this structure are only manipulated by code in this file, opaque handles -** of type Fts3SegReader* are also used by code in fts3.c to iterate through -** terms when querying the full-text index. See functions: -** -** sqlite3Fts3SegReaderNew() -** sqlite3Fts3SegReaderFree() -** sqlite3Fts3SegReaderIterate() -** -** Methods used to manipulate Fts3SegReader structures: -** -** fts3SegReaderNext() -** fts3SegReaderFirstDocid() -** fts3SegReaderNextDocid() +** Argument apSegment is an array of nSegment elements. It is known that +** the final (nSegment-nSuspect) members are already in sorted order +** (according to the comparison function provided). This function shuffles +** the array around until all entries are in sorted order. */ -struct Fts3SegReader { - int iIdx; /* Index within level, or 0x7FFFFFFF for PT */ - - sqlite3_int64 iStartBlock; /* Rowid of first leaf block to traverse */ - sqlite3_int64 iLeafEndBlock; /* Rowid of final leaf block to traverse */ - sqlite3_int64 iEndBlock; /* Rowid of final block in segment (or 0) */ - sqlite3_int64 iCurrentBlock; /* Current leaf block (or 0) */ - - char *aNode; /* Pointer to node data (or NULL) */ - int nNode; /* Size of buffer at aNode (or 0) */ - int nPopulate; /* If >0, bytes of buffer aNode[] loaded */ - sqlite3_blob *pBlob; /* If not NULL, blob handle to read node */ - - Fts3HashElem **ppNextElem; - - /* Variables set by fts3SegReaderNext(). These may be read directly - ** by the caller. They are valid from the time SegmentReaderNew() returns - ** until SegmentReaderNext() returns something other than SQLITE_OK - ** (i.e. SQLITE_DONE). - */ - int nTerm; /* Number of bytes in current term */ - char *zTerm; /* Pointer to current term */ - int nTermAlloc; /* Allocated size of zTerm buffer */ - char *aDoclist; /* Pointer to doclist of current entry */ - int nDoclist; /* Size of doclist in current entry */ - - /* The following variables are used by fts3SegReaderNextDocid() to iterate - ** through the current doclist (aDoclist/nDoclist). - */ - char *pOffsetList; - int nOffsetList; /* For descending pending seg-readers only */ - sqlite3_int64 iDocid; -}; +static void fts3SegReaderSort( + Fts3SegReader **apSegment, /* Array to sort entries of */ + int nSegment, /* Size of apSegment array */ + int nSuspect, /* Unsorted entry count */ + int (*xCmp)(Fts3SegReader *, Fts3SegReader *) /* Comparison function */ +){ + int i; /* Iterator variable */ -#define fts3SegReaderIsPending(p) ((p)->ppNextElem!=0) -#define fts3SegReaderIsRootOnly(p) ((p)->aNode==(char *)&(p)[1]) + assert( nSuspect<=nSegment ); -/* -** An instance of this structure is used to create a segment b-tree in the -** database. The internal details of this type are only accessed by the -** following functions: -** -** fts3SegWriterAdd() -** fts3SegWriterFlush() -** fts3SegWriterFree() -*/ -struct SegmentWriter { - SegmentNode *pTree; /* Pointer to interior tree structure */ - sqlite3_int64 iFirst; /* First slot in %_segments written */ - sqlite3_int64 iFree; /* Next free slot in %_segments */ - char *zTerm; /* Pointer to previous term buffer */ - int nTerm; /* Number of bytes in zTerm */ - int nMalloc; /* Size of malloc'd buffer at zMalloc */ - char *zMalloc; /* Malloc'd space (possibly) used for zTerm */ - int nSize; /* Size of allocation at aData */ - int nData; /* Bytes of data in aData */ - char *aData; /* Pointer to block from malloc() */ -}; + if( nSuspect==nSegment ) nSuspect--; + for(i=nSuspect-1; i>=0; i--){ + int j; + for(j=i; j<(nSegment-1); j++){ + Fts3SegReader *pTmp; + if( xCmp(apSegment[j], apSegment[j+1])<0 ) break; + pTmp = apSegment[j+1]; + apSegment[j+1] = apSegment[j]; + apSegment[j] = pTmp; + } + } -/* -** Type SegmentNode is used by the following three functions to create -** the interior part of the segment b+-tree structures (everything except -** the leaf nodes). These functions and type are only ever used by code -** within the fts3SegWriterXXX() family of functions described above. -** -** fts3NodeAddTerm() -** fts3NodeWrite() -** fts3NodeFree() -** -** When a b+tree is written to the database (either as a result of a merge -** or the pending-terms table being flushed), leaves are written into the -** database file as soon as they are completely populated. The interior of -** the tree is assembled in memory and written out only once all leaves have -** been populated and stored. This is Ok, as the b+-tree fanout is usually -** very large, meaning that the interior of the tree consumes relatively -** little memory. -*/ -struct SegmentNode { - SegmentNode *pParent; /* Parent node (or NULL for root node) */ - SegmentNode *pRight; /* Pointer to right-sibling */ - SegmentNode *pLeftmost; /* Pointer to left-most node of this depth */ - int nEntry; /* Number of terms written to node so far */ - char *zTerm; /* Pointer to previous term buffer */ - int nTerm; /* Number of bytes in zTerm */ - int nMalloc; /* Size of malloc'd buffer at zMalloc */ - char *zMalloc; /* Malloc'd space (possibly) used for zTerm */ - int nData; /* Bytes of valid data so far */ - char *aData; /* Node data */ -}; +#ifndef NDEBUG + /* Check that the list really is sorted now. */ + for(i=0; i<(nSuspect-1); i++){ + assert( xCmp(apSegment[i], apSegment[i+1])<0 ); + } +#endif +} + +/* +** Insert a record into the %_segments table. +*/ +static int fts3WriteSegment( + Fts3Table *p, /* Virtual table handle */ + sqlite3_int64 iBlock, /* Block id for new block */ + char *z, /* Pointer to buffer containing block data */ + int n /* Size of buffer z in bytes */ +){ + sqlite3_stmt *pStmt; + int rc = fts3SqlStmt(p, SQL_INSERT_SEGMENTS, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pStmt, 1, iBlock); + sqlite3_bind_blob(pStmt, 2, z, n, SQLITE_STATIC); + sqlite3_step(pStmt); + rc = sqlite3_reset(pStmt); + } + return rc; +} /* -** Valid values for the second argument to fts3SqlStmt(). +** Find the largest relative level number in the table. If successful, set +** *pnMax to this value and return SQLITE_OK. Otherwise, if an error occurs, +** set *pnMax to zero and return an SQLite error code. */ -#define SQL_DELETE_CONTENT 0 -#define SQL_IS_EMPTY 1 -#define SQL_DELETE_ALL_CONTENT 2 -#define SQL_DELETE_ALL_SEGMENTS 3 -#define SQL_DELETE_ALL_SEGDIR 4 -#define SQL_DELETE_ALL_DOCSIZE 5 -#define SQL_DELETE_ALL_STAT 6 -#define SQL_SELECT_CONTENT_BY_ROWID 7 -#define SQL_NEXT_SEGMENT_INDEX 8 -#define SQL_INSERT_SEGMENTS 9 -#define SQL_NEXT_SEGMENTS_ID 10 -#define SQL_INSERT_SEGDIR 11 -#define SQL_SELECT_LEVEL 12 -#define SQL_SELECT_LEVEL_RANGE 13 -#define SQL_SELECT_LEVEL_COUNT 14 -#define SQL_SELECT_SEGDIR_MAX_LEVEL 15 -#define SQL_DELETE_SEGDIR_LEVEL 16 -#define SQL_DELETE_SEGMENTS_RANGE 17 -#define SQL_CONTENT_INSERT 18 -#define SQL_DELETE_DOCSIZE 19 -#define SQL_REPLACE_DOCSIZE 20 -#define SQL_SELECT_DOCSIZE 21 -#define SQL_SELECT_DOCTOTAL 22 -#define SQL_REPLACE_DOCTOTAL 23 +SQLITE_PRIVATE int sqlite3Fts3MaxLevel(Fts3Table *p, int *pnMax){ + int rc; + int mxLevel = 0; + sqlite3_stmt *pStmt = 0; -#define SQL_SELECT_ALL_PREFIX_LEVEL 24 -#define SQL_DELETE_ALL_TERMS_SEGDIR 25 + rc = fts3SqlStmt(p, SQL_SELECT_MXLEVEL, &pStmt, 0); + if( rc==SQLITE_OK ){ + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + mxLevel = sqlite3_column_int(pStmt, 0); + } + rc = sqlite3_reset(pStmt); + } + *pnMax = mxLevel; + return rc; +} -#define SQL_DELETE_SEGDIR_RANGE 26 +/* +** Insert a record into the %_segdir table. +*/ +static int fts3WriteSegdir( + Fts3Table *p, /* Virtual table handle */ + sqlite3_int64 iLevel, /* Value for "level" field (absolute level) */ + int iIdx, /* Value for "idx" field */ + sqlite3_int64 iStartBlock, /* Value for "start_block" field */ + sqlite3_int64 iLeafEndBlock, /* Value for "leaves_end_block" field */ + sqlite3_int64 iEndBlock, /* Value for "end_block" field */ + sqlite3_int64 nLeafData, /* Bytes of leaf data in segment */ + char *zRoot, /* Blob value for "root" field */ + int nRoot /* Number of bytes in buffer zRoot */ +){ + sqlite3_stmt *pStmt; + int rc = fts3SqlStmt(p, SQL_INSERT_SEGDIR, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pStmt, 1, iLevel); + sqlite3_bind_int(pStmt, 2, iIdx); + sqlite3_bind_int64(pStmt, 3, iStartBlock); + sqlite3_bind_int64(pStmt, 4, iLeafEndBlock); + if( nLeafData==0 ){ + sqlite3_bind_int64(pStmt, 5, iEndBlock); + }else{ + char *zEnd = sqlite3_mprintf("%lld %lld", iEndBlock, nLeafData); + if( !zEnd ) return SQLITE_NOMEM; + sqlite3_bind_text(pStmt, 5, zEnd, -1, sqlite3_free); + } + sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC); + sqlite3_step(pStmt); + rc = sqlite3_reset(pStmt); + } + return rc; +} /* -** This function is used to obtain an SQLite prepared statement handle -** for the statement identified by the second argument. If successful, -** *pp is set to the requested statement handle and SQLITE_OK returned. -** Otherwise, an SQLite error code is returned and *pp is set to 0. +** Return the size of the common prefix (if any) shared by zPrev and +** zNext, in bytes. For example, ** -** If argument apVal is not NULL, then it must point to an array with -** at least as many entries as the requested statement has bound -** parameters. The values are bound to the statements parameters before -** returning. +** fts3PrefixCompress("abc", 3, "abcdef", 6) // returns 3 +** fts3PrefixCompress("abX", 3, "abcdef", 6) // returns 2 +** fts3PrefixCompress("abX", 3, "Xbcdef", 6) // returns 0 */ -static int fts3SqlStmt( +static int fts3PrefixCompress( + const char *zPrev, /* Buffer containing previous term */ + int nPrev, /* Size of buffer zPrev in bytes */ + const char *zNext, /* Buffer containing next term */ + int nNext /* Size of buffer zNext in bytes */ +){ + int n; + UNUSED_PARAMETER(nNext); + for(n=0; nnData; /* Current size of node in bytes */ + int nReq = nData; /* Required space after adding zTerm */ + int nPrefix; /* Number of bytes of prefix compression */ + int nSuffix; /* Suffix length */ -/* 14 */ "SELECT count(*) FROM %Q.'%q_segdir' WHERE level = ?", -/* 15 */ "SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?", + nPrefix = fts3PrefixCompress(pTree->zTerm, pTree->nTerm, zTerm, nTerm); + nSuffix = nTerm-nPrefix; -/* 16 */ "DELETE FROM %Q.'%q_segdir' WHERE level = ?", -/* 17 */ "DELETE FROM %Q.'%q_segments' WHERE blockid BETWEEN ? AND ?", -/* 18 */ "INSERT INTO %Q.'%q_content' VALUES(%s)", -/* 19 */ "DELETE FROM %Q.'%q_docsize' WHERE docid = ?", -/* 20 */ "REPLACE INTO %Q.'%q_docsize' VALUES(?,?)", -/* 21 */ "SELECT size FROM %Q.'%q_docsize' WHERE docid=?", -/* 22 */ "SELECT value FROM %Q.'%q_stat' WHERE id=0", -/* 23 */ "REPLACE INTO %Q.'%q_stat' VALUES(0,?)", -/* 24 */ "", -/* 25 */ "", + nReq += sqlite3Fts3VarintLen(nPrefix)+sqlite3Fts3VarintLen(nSuffix)+nSuffix; + if( nReq<=p->nNodeSize || !pTree->zTerm ){ -/* 26 */ "DELETE FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ?", + if( nReq>p->nNodeSize ){ + /* An unusual case: this is the first term to be added to the node + ** and the static node buffer (p->nNodeSize bytes) is not large + ** enough. Use a separately malloced buffer instead This wastes + ** p->nNodeSize bytes, but since this scenario only comes about when + ** the database contain two terms that share a prefix of almost 2KB, + ** this is not expected to be a serious problem. + */ + assert( pTree->aData==(char *)&pTree[1] ); + pTree->aData = (char *)sqlite3_malloc(nReq); + if( !pTree->aData ){ + return SQLITE_NOMEM; + } + } - }; - int rc = SQLITE_OK; - sqlite3_stmt *pStmt; + if( pTree->zTerm ){ + /* There is no prefix-length field for first term in a node */ + nData += sqlite3Fts3PutVarint(&pTree->aData[nData], nPrefix); + } - assert( SizeofArray(azSql)==SizeofArray(p->aStmt) ); - assert( eStmt=0 ); - - pStmt = p->aStmt[eStmt]; - if( !pStmt ){ - char *zSql; - if( eStmt==SQL_CONTENT_INSERT ){ - zSql = sqlite3_mprintf(azSql[eStmt], p->zDb, p->zName, p->zWriteExprlist); - }else if( eStmt==SQL_SELECT_CONTENT_BY_ROWID ){ - zSql = sqlite3_mprintf(azSql[eStmt], p->zReadExprlist, p->zDb, p->zName); - }else{ - zSql = sqlite3_mprintf(azSql[eStmt], p->zDb, p->zName); - } - if( !zSql ){ - rc = SQLITE_NOMEM; - }else{ - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, NULL); - sqlite3_free(zSql); - assert( rc==SQLITE_OK || pStmt==0 ); - p->aStmt[eStmt] = pStmt; + nData += sqlite3Fts3PutVarint(&pTree->aData[nData], nSuffix); + memcpy(&pTree->aData[nData], &zTerm[nPrefix], nSuffix); + pTree->nData = nData + nSuffix; + pTree->nEntry++; + + if( isCopyTerm ){ + if( pTree->nMalloczMalloc, nTerm*2); + if( !zNew ){ + return SQLITE_NOMEM; + } + pTree->nMalloc = nTerm*2; + pTree->zMalloc = zNew; + } + pTree->zTerm = pTree->zMalloc; + memcpy(pTree->zTerm, zTerm, nTerm); + pTree->nTerm = nTerm; + }else{ + pTree->zTerm = (char *)zTerm; + pTree->nTerm = nTerm; + } + return SQLITE_OK; } } - if( apVal ){ - int i; - int nParam = sqlite3_bind_parameter_count(pStmt); - for(i=0; rc==SQLITE_OK && inNodeSize); + if( !pNew ){ + return SQLITE_NOMEM; + } + memset(pNew, 0, sizeof(SegmentNode)); + pNew->nData = 1 + FTS3_VARINT_MAX; + pNew->aData = (char *)&pNew[1]; + + if( pTree ){ + SegmentNode *pParent = pTree->pParent; + rc = fts3NodeAddTerm(p, &pParent, isCopyTerm, zTerm, nTerm); + if( pTree->pParent==0 ){ + pTree->pParent = pParent; } + pTree->pRight = pNew; + pNew->pLeftmost = pTree->pLeftmost; + pNew->pParent = pParent; + pNew->zMalloc = pTree->zMalloc; + pNew->nMalloc = pTree->nMalloc; + pTree->zMalloc = 0; + }else{ + pNew->pLeftmost = pNew; + rc = fts3NodeAddTerm(p, &pNew, isCopyTerm, zTerm, nTerm); } - *pp = pStmt; + + *ppTree = pNew; return rc; } -static int fts3SelectDocsize( - Fts3Table *pTab, /* FTS3 table handle */ - int eStmt, /* Either SQL_SELECT_DOCSIZE or DOCTOTAL */ - sqlite3_int64 iDocid, /* Docid to bind for SQL_SELECT_DOCSIZE */ - sqlite3_stmt **ppStmt /* OUT: Statement handle */ +/* +** Helper function for fts3NodeWrite(). +*/ +static int fts3TreeFinishNode( + SegmentNode *pTree, + int iHeight, + sqlite3_int64 iLeftChild ){ - sqlite3_stmt *pStmt = 0; /* Statement requested from fts3SqlStmt() */ - int rc; /* Return code */ + int nStart; + assert( iHeight>=1 && iHeight<128 ); + nStart = FTS3_VARINT_MAX - sqlite3Fts3VarintLen(iLeftChild); + pTree->aData[nStart] = (char)iHeight; + sqlite3Fts3PutVarint(&pTree->aData[nStart+1], iLeftChild); + return nStart; +} - assert( eStmt==SQL_SELECT_DOCSIZE || eStmt==SQL_SELECT_DOCTOTAL ); +/* +** Write the buffer for the segment node pTree and all of its peers to the +** database. Then call this function recursively to write the parent of +** pTree and its peers to the database. +** +** Except, if pTree is a root node, do not write it to the database. Instead, +** set output variables *paRoot and *pnRoot to contain the root node. +** +** If successful, SQLITE_OK is returned and output variable *piLast is +** set to the largest blockid written to the database (or zero if no +** blocks were written to the db). Otherwise, an SQLite error code is +** returned. +*/ +static int fts3NodeWrite( + Fts3Table *p, /* Virtual table handle */ + SegmentNode *pTree, /* SegmentNode handle */ + int iHeight, /* Height of this node in tree */ + sqlite3_int64 iLeaf, /* Block id of first leaf node */ + sqlite3_int64 iFree, /* Block id of next free slot in %_segments */ + sqlite3_int64 *piLast, /* OUT: Block id of last entry written */ + char **paRoot, /* OUT: Data for root node */ + int *pnRoot /* OUT: Size of root node in bytes */ +){ + int rc = SQLITE_OK; - rc = fts3SqlStmt(pTab, eStmt, &pStmt, 0); - if( rc==SQLITE_OK ){ - if( eStmt==SQL_SELECT_DOCSIZE ){ - sqlite3_bind_int64(pStmt, 1, iDocid); + if( !pTree->pParent ){ + /* Root node of the tree. */ + int nStart = fts3TreeFinishNode(pTree, iHeight, iLeaf); + *piLast = iFree-1; + *pnRoot = pTree->nData - nStart; + *paRoot = &pTree->aData[nStart]; + }else{ + SegmentNode *pIter; + sqlite3_int64 iNextFree = iFree; + sqlite3_int64 iNextLeaf = iLeaf; + for(pIter=pTree->pLeftmost; pIter && rc==SQLITE_OK; pIter=pIter->pRight){ + int nStart = fts3TreeFinishNode(pIter, iHeight, iNextLeaf); + int nWrite = pIter->nData - nStart; + + rc = fts3WriteSegment(p, iNextFree, &pIter->aData[nStart], nWrite); + iNextFree++; + iNextLeaf += (pIter->nEntry+1); } - rc = sqlite3_step(pStmt); - if( rc!=SQLITE_ROW || sqlite3_column_type(pStmt, 0)!=SQLITE_BLOB ){ - rc = sqlite3_reset(pStmt); - if( rc==SQLITE_OK ) rc = SQLITE_CORRUPT_VTAB; - pStmt = 0; - }else{ - rc = SQLITE_OK; + if( rc==SQLITE_OK ){ + assert( iNextLeaf==iFree ); + rc = fts3NodeWrite( + p, pTree->pParent, iHeight+1, iFree, iNextFree, piLast, paRoot, pnRoot + ); } } - *ppStmt = pStmt; return rc; } -SQLITE_PRIVATE int sqlite3Fts3SelectDoctotal( - Fts3Table *pTab, /* Fts3 table handle */ - sqlite3_stmt **ppStmt /* OUT: Statement handle */ -){ - return fts3SelectDocsize(pTab, SQL_SELECT_DOCTOTAL, 0, ppStmt); -} - -SQLITE_PRIVATE int sqlite3Fts3SelectDocsize( - Fts3Table *pTab, /* Fts3 table handle */ - sqlite3_int64 iDocid, /* Docid to read size data for */ - sqlite3_stmt **ppStmt /* OUT: Statement handle */ -){ - return fts3SelectDocsize(pTab, SQL_SELECT_DOCSIZE, iDocid, ppStmt); +/* +** Free all memory allocations associated with the tree pTree. +*/ +static void fts3NodeFree(SegmentNode *pTree){ + if( pTree ){ + SegmentNode *p = pTree->pLeftmost; + fts3NodeFree(p->pParent); + while( p ){ + SegmentNode *pRight = p->pRight; + if( p->aData!=(char *)&p[1] ){ + sqlite3_free(p->aData); + } + assert( pRight==0 || p->zMalloc==0 ); + sqlite3_free(p->zMalloc); + sqlite3_free(p); + p = pRight; + } + } } /* -** Similar to fts3SqlStmt(). Except, after binding the parameters in -** array apVal[] to the SQL statement identified by eStmt, the statement -** is executed. +** Add a term to the segment being constructed by the SegmentWriter object +** *ppWriter. When adding the first term to a segment, *ppWriter should +** be passed NULL. This function will allocate a new SegmentWriter object +** and return it via the input/output variable *ppWriter in this case. ** -** Returns SQLITE_OK if the statement is successfully executed, or an -** SQLite error code otherwise. +** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code. */ -static void fts3SqlExec( - int *pRC, /* Result code */ - Fts3Table *p, /* The FTS3 table */ - int eStmt, /* Index of statement to evaluate */ - sqlite3_value **apVal /* Parameters to bind */ +static int fts3SegWriterAdd( + Fts3Table *p, /* Virtual table handle */ + SegmentWriter **ppWriter, /* IN/OUT: SegmentWriter handle */ + int isCopyTerm, /* True if buffer zTerm must be copied */ + const char *zTerm, /* Pointer to buffer containing term */ + int nTerm, /* Size of term in bytes */ + const char *aDoclist, /* Pointer to buffer containing doclist */ + int nDoclist /* Size of doclist in bytes */ ){ - sqlite3_stmt *pStmt; - int rc; - if( *pRC ) return; - rc = fts3SqlStmt(p, eStmt, &pStmt, apVal); - if( rc==SQLITE_OK ){ - sqlite3_step(pStmt); + int nPrefix; /* Size of term prefix in bytes */ + int nSuffix; /* Size of term suffix in bytes */ + int nReq; /* Number of bytes required on leaf page */ + int nData; + SegmentWriter *pWriter = *ppWriter; + + if( !pWriter ){ + int rc; + sqlite3_stmt *pStmt; + + /* Allocate the SegmentWriter structure */ + pWriter = (SegmentWriter *)sqlite3_malloc(sizeof(SegmentWriter)); + if( !pWriter ) return SQLITE_NOMEM; + memset(pWriter, 0, sizeof(SegmentWriter)); + *ppWriter = pWriter; + + /* Allocate a buffer in which to accumulate data */ + pWriter->aData = (char *)sqlite3_malloc(p->nNodeSize); + if( !pWriter->aData ) return SQLITE_NOMEM; + pWriter->nSize = p->nNodeSize; + + /* Find the next free blockid in the %_segments table */ + rc = fts3SqlStmt(p, SQL_NEXT_SEGMENTS_ID, &pStmt, 0); + if( rc!=SQLITE_OK ) return rc; + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + pWriter->iFree = sqlite3_column_int64(pStmt, 0); + pWriter->iFirst = pWriter->iFree; + } rc = sqlite3_reset(pStmt); + if( rc!=SQLITE_OK ) return rc; + } + nData = pWriter->nData; + + nPrefix = fts3PrefixCompress(pWriter->zTerm, pWriter->nTerm, zTerm, nTerm); + nSuffix = nTerm-nPrefix; + + /* Figure out how many bytes are required by this new entry */ + nReq = sqlite3Fts3VarintLen(nPrefix) + /* varint containing prefix size */ + sqlite3Fts3VarintLen(nSuffix) + /* varint containing suffix size */ + nSuffix + /* Term suffix */ + sqlite3Fts3VarintLen(nDoclist) + /* Size of doclist */ + nDoclist; /* Doclist data */ + + if( nData>0 && nData+nReq>p->nNodeSize ){ + int rc; + + /* The current leaf node is full. Write it out to the database. */ + rc = fts3WriteSegment(p, pWriter->iFree++, pWriter->aData, nData); + if( rc!=SQLITE_OK ) return rc; + p->nLeafAdd++; + + /* Add the current term to the interior node tree. The term added to + ** the interior tree must: + ** + ** a) be greater than the largest term on the leaf node just written + ** to the database (still available in pWriter->zTerm), and + ** + ** b) be less than or equal to the term about to be added to the new + ** leaf node (zTerm/nTerm). + ** + ** In other words, it must be the prefix of zTerm 1 byte longer than + ** the common prefix (if any) of zTerm and pWriter->zTerm. + */ + assert( nPrefixpTree, isCopyTerm, zTerm, nPrefix+1); + if( rc!=SQLITE_OK ) return rc; + + nData = 0; + pWriter->nTerm = 0; + + nPrefix = 0; + nSuffix = nTerm; + nReq = 1 + /* varint containing prefix size */ + sqlite3Fts3VarintLen(nTerm) + /* varint containing suffix size */ + nTerm + /* Term suffix */ + sqlite3Fts3VarintLen(nDoclist) + /* Size of doclist */ + nDoclist; /* Doclist data */ + } + + /* Increase the total number of bytes written to account for the new entry. */ + pWriter->nLeafData += nReq; + + /* If the buffer currently allocated is too small for this entry, realloc + ** the buffer to make it large enough. + */ + if( nReq>pWriter->nSize ){ + char *aNew = sqlite3_realloc(pWriter->aData, nReq); + if( !aNew ) return SQLITE_NOMEM; + pWriter->aData = aNew; + pWriter->nSize = nReq; + } + assert( nData+nReq<=pWriter->nSize ); + + /* Append the prefix-compressed term and doclist to the buffer. */ + nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nPrefix); + nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nSuffix); + memcpy(&pWriter->aData[nData], &zTerm[nPrefix], nSuffix); + nData += nSuffix; + nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nDoclist); + memcpy(&pWriter->aData[nData], aDoclist, nDoclist); + pWriter->nData = nData + nDoclist; + + /* Save the current term so that it can be used to prefix-compress the next. + ** If the isCopyTerm parameter is true, then the buffer pointed to by + ** zTerm is transient, so take a copy of the term data. Otherwise, just + ** store a copy of the pointer. + */ + if( isCopyTerm ){ + if( nTerm>pWriter->nMalloc ){ + char *zNew = sqlite3_realloc(pWriter->zMalloc, nTerm*2); + if( !zNew ){ + return SQLITE_NOMEM; + } + pWriter->nMalloc = nTerm*2; + pWriter->zMalloc = zNew; + pWriter->zTerm = zNew; + } + assert( pWriter->zTerm==pWriter->zMalloc ); + memcpy(pWriter->zTerm, zTerm, nTerm); + }else{ + pWriter->zTerm = (char *)zTerm; } - *pRC = rc; -} + pWriter->nTerm = nTerm; + return SQLITE_OK; +} /* -** This function ensures that the caller has obtained a shared-cache -** table-lock on the %_content table. This is required before reading -** data from the fts3 table. If this lock is not acquired first, then -** the caller may end up holding read-locks on the %_segments and %_segdir -** tables, but no read-lock on the %_content table. If this happens -** a second connection will be able to write to the fts3 table, but -** attempting to commit those writes might return SQLITE_LOCKED or -** SQLITE_LOCKED_SHAREDCACHE (because the commit attempts to obtain -** write-locks on the %_segments and %_segdir ** tables). -** -** We try to avoid this because if FTS3 returns any error when committing -** a transaction, the whole transaction will be rolled back. And this is -** not what users expect when they get SQLITE_LOCKED_SHAREDCACHE. It can -** still happen if the user reads data directly from the %_segments or -** %_segdir tables instead of going through FTS3 though. +** Flush all data associated with the SegmentWriter object pWriter to the +** database. This function must be called after all terms have been added +** to the segment using fts3SegWriterAdd(). If successful, SQLITE_OK is +** returned. Otherwise, an SQLite error code. */ -SQLITE_PRIVATE int sqlite3Fts3ReadLock(Fts3Table *p){ +static int fts3SegWriterFlush( + Fts3Table *p, /* Virtual table handle */ + SegmentWriter *pWriter, /* SegmentWriter to flush to the db */ + sqlite3_int64 iLevel, /* Value for 'level' column of %_segdir */ + int iIdx /* Value for 'idx' column of %_segdir */ +){ int rc; /* Return code */ - sqlite3_stmt *pStmt; /* Statement used to obtain lock */ + if( pWriter->pTree ){ + sqlite3_int64 iLast = 0; /* Largest block id written to database */ + sqlite3_int64 iLastLeaf; /* Largest leaf block id written to db */ + char *zRoot = NULL; /* Pointer to buffer containing root node */ + int nRoot = 0; /* Size of buffer zRoot */ - rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pStmt, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_null(pStmt, 1); - sqlite3_step(pStmt); - rc = sqlite3_reset(pStmt); + iLastLeaf = pWriter->iFree; + rc = fts3WriteSegment(p, pWriter->iFree++, pWriter->aData, pWriter->nData); + if( rc==SQLITE_OK ){ + rc = fts3NodeWrite(p, pWriter->pTree, 1, + pWriter->iFirst, pWriter->iFree, &iLast, &zRoot, &nRoot); + } + if( rc==SQLITE_OK ){ + rc = fts3WriteSegdir(p, iLevel, iIdx, + pWriter->iFirst, iLastLeaf, iLast, pWriter->nLeafData, zRoot, nRoot); + } + }else{ + /* The entire tree fits on the root node. Write it to the segdir table. */ + rc = fts3WriteSegdir(p, iLevel, iIdx, + 0, 0, 0, pWriter->nLeafData, pWriter->aData, pWriter->nData); } + p->nLeafAdd++; return rc; } /* -** Set *ppStmt to a statement handle that may be used to iterate through -** all rows in the %_segdir table, from oldest to newest. If successful, -** return SQLITE_OK. If an error occurs while preparing the statement, -** return an SQLite error code. -** -** There is only ever one instance of this SQL statement compiled for -** each FTS3 table. -** -** The statement returns the following columns from the %_segdir table: +** Release all memory held by the SegmentWriter object passed as the +** first argument. +*/ +static void fts3SegWriterFree(SegmentWriter *pWriter){ + if( pWriter ){ + sqlite3_free(pWriter->aData); + sqlite3_free(pWriter->zMalloc); + fts3NodeFree(pWriter->pTree); + sqlite3_free(pWriter); + } +} + +/* +** The first value in the apVal[] array is assumed to contain an integer. +** This function tests if there exist any documents with docid values that +** are different from that integer. i.e. if deleting the document with docid +** pRowid would mean the FTS3 table were empty. ** -** 0: idx -** 1: start_block -** 2: leaves_end_block -** 3: end_block -** 4: root +** If successful, *pisEmpty is set to true if the table is empty except for +** document pRowid, or false otherwise, and SQLITE_OK is returned. If an +** error occurs, an SQLite error code is returned. */ -SQLITE_PRIVATE int sqlite3Fts3AllSegdirs( - Fts3Table *p, /* FTS3 table */ - int iIndex, /* Index for p->aIndex[] */ - int iLevel, /* Level to select */ - sqlite3_stmt **ppStmt /* OUT: Compiled statement */ -){ +static int fts3IsEmpty(Fts3Table *p, sqlite3_value *pRowid, int *pisEmpty){ + sqlite3_stmt *pStmt; int rc; - sqlite3_stmt *pStmt = 0; - - assert( iLevel==FTS3_SEGCURSOR_ALL || iLevel>=0 ); - assert( iLevel=0 && iIndexnIndex ); - - if( iLevel<0 ){ - /* "SELECT * FROM %_segdir WHERE level BETWEEN ? AND ? ORDER BY ..." */ - rc = fts3SqlStmt(p, SQL_SELECT_LEVEL_RANGE, &pStmt, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pStmt, 1, iIndex*FTS3_SEGDIR_MAXLEVEL); - sqlite3_bind_int(pStmt, 2, (iIndex+1)*FTS3_SEGDIR_MAXLEVEL-1); - } + if( p->zContentTbl ){ + /* If using the content=xxx option, assume the table is never empty */ + *pisEmpty = 0; + rc = SQLITE_OK; }else{ - /* "SELECT * FROM %_segdir WHERE level = ? ORDER BY ..." */ - rc = fts3SqlStmt(p, SQL_SELECT_LEVEL, &pStmt, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pStmt, 1, iLevel+iIndex*FTS3_SEGDIR_MAXLEVEL); + rc = fts3SqlStmt(p, SQL_IS_EMPTY, &pStmt, &pRowid); + if( rc==SQLITE_OK ){ + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + *pisEmpty = sqlite3_column_int(pStmt, 0); + } + rc = sqlite3_reset(pStmt); } } - *ppStmt = pStmt; return rc; } - /* -** Append a single varint to a PendingList buffer. SQLITE_OK is returned -** if successful, or an SQLite error code otherwise. +** Set *pnMax to the largest segment level in the database for the index +** iIndex. ** -** This function also serves to allocate the PendingList structure itself. -** For example, to create a new PendingList structure containing two -** varints: +** Segment levels are stored in the 'level' column of the %_segdir table. ** -** PendingList *p = 0; -** fts3PendingListAppendVarint(&p, 1); -** fts3PendingListAppendVarint(&p, 2); +** Return SQLITE_OK if successful, or an SQLite error code if not. */ -static int fts3PendingListAppendVarint( - PendingList **pp, /* IN/OUT: Pointer to PendingList struct */ - sqlite3_int64 i /* Value to append to data */ +static int fts3SegmentMaxLevel( + Fts3Table *p, + int iLangid, + int iIndex, + sqlite3_int64 *pnMax ){ - PendingList *p = *pp; + sqlite3_stmt *pStmt; + int rc; + assert( iIndex>=0 && iIndexnIndex ); - /* Allocate or grow the PendingList as required. */ - if( !p ){ - p = sqlite3_malloc(sizeof(*p) + 100); - if( !p ){ - return SQLITE_NOMEM; - } - p->nSpace = 100; - p->aData = (char *)&p[1]; - p->nData = 0; - } - else if( p->nData+FTS3_VARINT_MAX+1>p->nSpace ){ - int nNew = p->nSpace * 2; - p = sqlite3_realloc(p, sizeof(*p) + nNew); - if( !p ){ - sqlite3_free(*pp); - *pp = 0; - return SQLITE_NOMEM; - } - p->nSpace = nNew; - p->aData = (char *)&p[1]; + /* Set pStmt to the compiled version of: + ** + ** SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? + ** + ** (1024 is actually the value of macro FTS3_SEGDIR_PREFIXLEVEL_STR). + */ + rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR_MAX_LEVEL, &pStmt, 0); + if( rc!=SQLITE_OK ) return rc; + sqlite3_bind_int64(pStmt, 1, getAbsoluteLevel(p, iLangid, iIndex, 0)); + sqlite3_bind_int64(pStmt, 2, + getAbsoluteLevel(p, iLangid, iIndex, FTS3_SEGDIR_MAXLEVEL-1) + ); + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + *pnMax = sqlite3_column_int64(pStmt, 0); } - - /* Append the new serialized varint to the end of the list. */ - p->nData += sqlite3Fts3PutVarint(&p->aData[p->nData], i); - p->aData[p->nData] = '\0'; - *pp = p; - return SQLITE_OK; + return sqlite3_reset(pStmt); } /* -** Add a docid/column/position entry to a PendingList structure. Non-zero -** is returned if the structure is sqlite3_realloced as part of adding -** the entry. Otherwise, zero. -** -** If an OOM error occurs, *pRc is set to SQLITE_NOMEM before returning. -** Zero is always returned in this case. Otherwise, if no OOM error occurs, -** it is set to SQLITE_OK. +** iAbsLevel is an absolute level that may be assumed to exist within +** the database. This function checks if it is the largest level number +** within its index. Assuming no error occurs, *pbMax is set to 1 if +** iAbsLevel is indeed the largest level, or 0 otherwise, and SQLITE_OK +** is returned. If an error occurs, an error code is returned and the +** final value of *pbMax is undefined. */ -static int fts3PendingListAppend( - PendingList **pp, /* IN/OUT: PendingList structure */ - sqlite3_int64 iDocid, /* Docid for entry to add */ - sqlite3_int64 iCol, /* Column for entry to add */ - sqlite3_int64 iPos, /* Position of term for entry to add */ - int *pRc /* OUT: Return code */ -){ - PendingList *p = *pp; - int rc = SQLITE_OK; - - assert( !p || p->iLastDocid<=iDocid ); +static int fts3SegmentIsMaxLevel(Fts3Table *p, i64 iAbsLevel, int *pbMax){ - if( !p || p->iLastDocid!=iDocid ){ - sqlite3_int64 iDelta = iDocid - (p ? p->iLastDocid : 0); - if( p ){ - assert( p->nDatanSpace ); - assert( p->aData[p->nData]==0 ); - p->nData++; - } - if( SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, iDelta)) ){ - goto pendinglistappend_out; - } - p->iLastCol = -1; - p->iLastPos = 0; - p->iLastDocid = iDocid; - } - if( iCol>0 && p->iLastCol!=iCol ){ - if( SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, 1)) - || SQLITE_OK!=(rc = fts3PendingListAppendVarint(&p, iCol)) - ){ - goto pendinglistappend_out; - } - p->iLastCol = iCol; - p->iLastPos = 0; - } - if( iCol>=0 ){ - assert( iPos>p->iLastPos || (iPos==0 && p->iLastPos==0) ); - rc = fts3PendingListAppendVarint(&p, 2+iPos-p->iLastPos); - if( rc==SQLITE_OK ){ - p->iLastPos = iPos; - } - } + /* Set pStmt to the compiled version of: + ** + ** SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? + ** + ** (1024 is actually the value of macro FTS3_SEGDIR_PREFIXLEVEL_STR). + */ + sqlite3_stmt *pStmt; + int rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR_MAX_LEVEL, &pStmt, 0); + if( rc!=SQLITE_OK ) return rc; + sqlite3_bind_int64(pStmt, 1, iAbsLevel+1); + sqlite3_bind_int64(pStmt, 2, + ((iAbsLevel/FTS3_SEGDIR_MAXLEVEL)+1) * FTS3_SEGDIR_MAXLEVEL + ); - pendinglistappend_out: - *pRc = rc; - if( p!=*pp ){ - *pp = p; - return 1; + *pbMax = 0; + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + *pbMax = sqlite3_column_type(pStmt, 0)==SQLITE_NULL; } - return 0; -} - -/* -** Free a PendingList object allocated by fts3PendingListAppend(). -*/ -static void fts3PendingListDelete(PendingList *pList){ - sqlite3_free(pList); + return sqlite3_reset(pStmt); } /* -** Add an entry to one of the pending-terms hash tables. +** Delete all entries in the %_segments table associated with the segment +** opened with seg-reader pSeg. This function does not affect the contents +** of the %_segdir table. */ -static int fts3PendingTermsAddOne( - Fts3Table *p, - int iCol, - int iPos, - Fts3Hash *pHash, /* Pending terms hash table to add entry to */ - const char *zToken, - int nToken +static int fts3DeleteSegment( + Fts3Table *p, /* FTS table handle */ + Fts3SegReader *pSeg /* Segment to delete */ ){ - PendingList *pList; - int rc = SQLITE_OK; - - pList = (PendingList *)fts3HashFind(pHash, zToken, nToken); - if( pList ){ - p->nPendingData -= (pList->nData + nToken + sizeof(Fts3HashElem)); - } - if( fts3PendingListAppend(&pList, p->iPrevDocid, iCol, iPos, &rc) ){ - if( pList==fts3HashInsert(pHash, zToken, nToken, pList) ){ - /* Malloc failed while inserting the new entry. This can only - ** happen if there was no previous entry for this token. - */ - assert( 0==fts3HashFind(pHash, zToken, nToken) ); - sqlite3_free(pList); - rc = SQLITE_NOMEM; + int rc = SQLITE_OK; /* Return code */ + if( pSeg->iStartBlock ){ + sqlite3_stmt *pDelete; /* SQL statement to delete rows */ + rc = fts3SqlStmt(p, SQL_DELETE_SEGMENTS_RANGE, &pDelete, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pDelete, 1, pSeg->iStartBlock); + sqlite3_bind_int64(pDelete, 2, pSeg->iEndBlock); + sqlite3_step(pDelete); + rc = sqlite3_reset(pDelete); } } - if( rc==SQLITE_OK ){ - p->nPendingData += (pList->nData + nToken + sizeof(Fts3HashElem)); - } return rc; } /* -** Tokenize the nul-terminated string zText and add all tokens to the -** pending-terms hash-table. The docid used is that currently stored in -** p->iPrevDocid, and the column is specified by argument iCol. +** This function is used after merging multiple segments into a single large +** segment to delete the old, now redundant, segment b-trees. Specifically, +** it: +** +** 1) Deletes all %_segments entries for the segments associated with +** each of the SegReader objects in the array passed as the third +** argument, and ** -** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code. +** 2) deletes all %_segdir entries with level iLevel, or all %_segdir +** entries regardless of level if (iLevel<0). +** +** SQLITE_OK is returned if successful, otherwise an SQLite error code. */ -static int fts3PendingTermsAdd( - Fts3Table *p, /* Table into which text will be inserted */ - const char *zText, /* Text of document to be inserted */ - int iCol, /* Column into which text is being inserted */ - u32 *pnWord /* OUT: Number of tokens inserted */ +static int fts3DeleteSegdir( + Fts3Table *p, /* Virtual table handle */ + int iLangid, /* Language id */ + int iIndex, /* Index for p->aIndex */ + int iLevel, /* Level of %_segdir entries to delete */ + Fts3SegReader **apSegment, /* Array of SegReader objects */ + int nReader /* Size of array apSegment */ ){ - int rc; - int iStart; - int iEnd; - int iPos; - int nWord = 0; - - char const *zToken; - int nToken; - - sqlite3_tokenizer *pTokenizer = p->pTokenizer; - sqlite3_tokenizer_module const *pModule = pTokenizer->pModule; - sqlite3_tokenizer_cursor *pCsr; - int (*xNext)(sqlite3_tokenizer_cursor *pCursor, - const char**,int*,int*,int*,int*); - - assert( pTokenizer && pModule ); + int rc = SQLITE_OK; /* Return Code */ + int i; /* Iterator variable */ + sqlite3_stmt *pDelete = 0; /* SQL statement to delete rows */ - /* If the user has inserted a NULL value, this function may be called with - ** zText==0. In this case, add zero token entries to the hash table and - ** return early. */ - if( zText==0 ){ - *pnWord = 0; - return SQLITE_OK; + for(i=0; rc==SQLITE_OK && ixOpen(pTokenizer, zText, -1, &pCsr); if( rc!=SQLITE_OK ){ return rc; } - pCsr->pTokenizer = pTokenizer; - - xNext = pModule->xNext; - while( SQLITE_OK==rc - && SQLITE_OK==(rc = xNext(pCsr, &zToken, &nToken, &iStart, &iEnd, &iPos)) - ){ - int i; - if( iPos>=nWord ) nWord = iPos+1; - /* Positions cannot be negative; we use -1 as a terminator internally. - ** Tokens must have a non-zero length. - */ - if( iPos<0 || !zToken || nToken<=0 ){ - rc = SQLITE_ERROR; - break; + assert( iLevel>=0 || iLevel==FTS3_SEGCURSOR_ALL ); + if( iLevel==FTS3_SEGCURSOR_ALL ){ + rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_RANGE, &pDelete, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pDelete, 1, getAbsoluteLevel(p, iLangid, iIndex, 0)); + sqlite3_bind_int64(pDelete, 2, + getAbsoluteLevel(p, iLangid, iIndex, FTS3_SEGDIR_MAXLEVEL-1) + ); } - - /* Add the term to the terms index */ - rc = fts3PendingTermsAddOne( - p, iCol, iPos, &p->aIndex[0].hPending, zToken, nToken - ); - - /* Add the term to each of the prefix indexes that it is not too - ** short for. */ - for(i=1; rc==SQLITE_OK && inIndex; i++){ - struct Fts3Index *pIndex = &p->aIndex[i]; - if( nTokennPrefix ) continue; - rc = fts3PendingTermsAddOne( - p, iCol, iPos, &pIndex->hPending, zToken, pIndex->nPrefix + }else{ + rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_LEVEL, &pDelete, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64( + pDelete, 1, getAbsoluteLevel(p, iLangid, iIndex, iLevel) ); } } - pModule->xClose(pCsr); - *pnWord = nWord; - return (rc==SQLITE_DONE ? SQLITE_OK : rc); -} - -/* -** Calling this function indicates that subsequent calls to -** fts3PendingTermsAdd() are to add term/position-list pairs for the -** contents of the document with docid iDocid. -*/ -static int fts3PendingTermsDocid(Fts3Table *p, sqlite_int64 iDocid){ - /* TODO(shess) Explore whether partially flushing the buffer on - ** forced-flush would provide better performance. I suspect that if - ** we ordered the doclists by size and flushed the largest until the - ** buffer was half empty, that would let the less frequent terms - ** generate longer doclists. - */ - if( iDocid<=p->iPrevDocid || p->nPendingData>p->nMaxPendingData ){ - int rc = sqlite3Fts3PendingTermsFlush(p); - if( rc!=SQLITE_OK ) return rc; + if( rc==SQLITE_OK ){ + sqlite3_step(pDelete); + rc = sqlite3_reset(pDelete); } - p->iPrevDocid = iDocid; - return SQLITE_OK; -} -/* -** Discard the contents of the pending-terms hash tables. -*/ -SQLITE_PRIVATE void sqlite3Fts3PendingTermsClear(Fts3Table *p){ - int i; - for(i=0; inIndex; i++){ - Fts3HashElem *pElem; - Fts3Hash *pHash = &p->aIndex[i].hPending; - for(pElem=fts3HashFirst(pHash); pElem; pElem=fts3HashNext(pElem)){ - PendingList *pList = (PendingList *)fts3HashData(pElem); - fts3PendingListDelete(pList); - } - fts3HashClear(pHash); - } - p->nPendingData = 0; + return rc; } /* -** This function is called by the xUpdate() method as part of an INSERT -** operation. It adds entries for each term in the new record to the -** pendingTerms hash table. +** When this function is called, buffer *ppList (size *pnList bytes) contains +** a position list that may (or may not) feature multiple columns. This +** function adjusts the pointer *ppList and the length *pnList so that they +** identify the subset of the position list that corresponds to column iCol. ** -** Argument apVal is the same as the similarly named argument passed to -** fts3InsertData(). Parameter iDocid is the docid of the new row. +** If there are no entries in the input position list for column iCol, then +** *pnList is set to zero before returning. +** +** If parameter bZero is non-zero, then any part of the input list following +** the end of the output list is zeroed before returning. */ -static int fts3InsertTerms(Fts3Table *p, sqlite3_value **apVal, u32 *aSz){ - int i; /* Iterator variable */ - for(i=2; inColumn+2; i++){ - const char *zText = (const char *)sqlite3_value_text(apVal[i]); - int rc = fts3PendingTermsAdd(p, zText, i-2, &aSz[i-2]); - if( rc!=SQLITE_OK ){ - return rc; +static void fts3ColumnFilter( + int iCol, /* Column to filter on */ + int bZero, /* Zero out anything following *ppList */ + char **ppList, /* IN/OUT: Pointer to position list */ + int *pnList /* IN/OUT: Size of buffer *ppList in bytes */ +){ + char *pList = *ppList; + int nList = *pnList; + char *pEnd = &pList[nList]; + int iCurrent = 0; + char *p = pList; + + assert( iCol>=0 ); + while( 1 ){ + char c = 0; + while( pnColumn] += sqlite3_value_bytes(apVal[i]); + p = &pList[1]; + p += fts3GetVarint32(p, &iCurrent); } - return SQLITE_OK; + + if( bZero && &pList[nList]!=pEnd ){ + memset(&pList[nList], 0, pEnd - &pList[nList]); + } + *ppList = pList; + *pnList = nList; } /* -** This function is called by the xUpdate() method for an INSERT operation. -** The apVal parameter is passed a copy of the apVal argument passed by -** SQLite to the xUpdate() method. i.e: +** Cache data in the Fts3MultiSegReader.aBuffer[] buffer (overwriting any +** existing data). Grow the buffer if required. ** -** apVal[0] Not used for INSERT. -** apVal[1] rowid -** apVal[2] Left-most user-defined column -** ... -** apVal[p->nColumn+1] Right-most user-defined column -** apVal[p->nColumn+2] Hidden column with same name as table -** apVal[p->nColumn+3] Hidden "docid" column (alias for rowid) +** If successful, return SQLITE_OK. Otherwise, if an OOM error is encountered +** trying to resize the buffer, return SQLITE_NOMEM. */ -static int fts3InsertData( - Fts3Table *p, /* Full-text table */ - sqlite3_value **apVal, /* Array of values to insert */ - sqlite3_int64 *piDocid /* OUT: Docid for row just inserted */ +static int fts3MsrBufferData( + Fts3MultiSegReader *pMsr, /* Multi-segment-reader handle */ + char *pList, + int nList ){ - int rc; /* Return code */ - sqlite3_stmt *pContentInsert; /* INSERT INTO %_content VALUES(...) */ - - /* Locate the statement handle used to insert data into the %_content - ** table. The SQL for this statement is: - ** - ** INSERT INTO %_content VALUES(?, ?, ?, ...) - ** - ** The statement features N '?' variables, where N is the number of user - ** defined columns in the FTS3 table, plus one for the docid field. - */ - rc = fts3SqlStmt(p, SQL_CONTENT_INSERT, &pContentInsert, &apVal[1]); - if( rc!=SQLITE_OK ){ - return rc; - } - - /* There is a quirk here. The users INSERT statement may have specified - ** a value for the "rowid" field, for the "docid" field, or for both. - ** Which is a problem, since "rowid" and "docid" are aliases for the - ** same value. For example: - ** - ** INSERT INTO fts3tbl(rowid, docid) VALUES(1, 2); - ** - ** In FTS3, this is an error. It is an error to specify non-NULL values - ** for both docid and some other rowid alias. - */ - if( SQLITE_NULL!=sqlite3_value_type(apVal[3+p->nColumn]) ){ - if( SQLITE_NULL==sqlite3_value_type(apVal[0]) - && SQLITE_NULL!=sqlite3_value_type(apVal[1]) - ){ - /* A rowid/docid conflict. */ - return SQLITE_ERROR; - } - rc = sqlite3_bind_value(pContentInsert, 1, apVal[3+p->nColumn]); - if( rc!=SQLITE_OK ) return rc; + if( nList>pMsr->nBuffer ){ + char *pNew; + pMsr->nBuffer = nList*2; + pNew = (char *)sqlite3_realloc(pMsr->aBuffer, pMsr->nBuffer); + if( !pNew ) return SQLITE_NOMEM; + pMsr->aBuffer = pNew; } - /* Execute the statement to insert the record. Set *piDocid to the - ** new docid value. - */ - sqlite3_step(pContentInsert); - rc = sqlite3_reset(pContentInsert); - - *piDocid = sqlite3_last_insert_rowid(p->db); - return rc; + memcpy(pMsr->aBuffer, pList, nList); + return SQLITE_OK; } +SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext( + Fts3Table *p, /* Virtual table handle */ + Fts3MultiSegReader *pMsr, /* Multi-segment-reader handle */ + sqlite3_int64 *piDocid, /* OUT: Docid value */ + char **paPoslist, /* OUT: Pointer to position list */ + int *pnPoslist /* OUT: Size of position list in bytes */ +){ + int nMerge = pMsr->nAdvance; + Fts3SegReader **apSegment = pMsr->apSegment; + int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( + p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp + ); + + if( nMerge==0 ){ + *paPoslist = 0; + return SQLITE_OK; + } + while( 1 ){ + Fts3SegReader *pSeg; + pSeg = pMsr->apSegment[0]; -/* -** Remove all data from the FTS3 table. Clear the hash table containing -** pending terms. -*/ -static int fts3DeleteAll(Fts3Table *p){ - int rc = SQLITE_OK; /* Return code */ + if( pSeg->pOffsetList==0 ){ + *paPoslist = 0; + break; + }else{ + int rc; + char *pList; + int nList; + int j; + sqlite3_int64 iDocid = apSegment[0]->iDocid; - /* Discard the contents of the pending-terms hash table. */ - sqlite3Fts3PendingTermsClear(p); + rc = fts3SegReaderNextDocid(p, apSegment[0], &pList, &nList); + j = 1; + while( rc==SQLITE_OK + && jpOffsetList + && apSegment[j]->iDocid==iDocid + ){ + rc = fts3SegReaderNextDocid(p, apSegment[j], 0, 0); + j++; + } + if( rc!=SQLITE_OK ) return rc; + fts3SegReaderSort(pMsr->apSegment, nMerge, j, xCmp); - /* Delete everything from the %_content, %_segments and %_segdir tables. */ - fts3SqlExec(&rc, p, SQL_DELETE_ALL_CONTENT, 0); - fts3SqlExec(&rc, p, SQL_DELETE_ALL_SEGMENTS, 0); - fts3SqlExec(&rc, p, SQL_DELETE_ALL_SEGDIR, 0); - if( p->bHasDocsize ){ - fts3SqlExec(&rc, p, SQL_DELETE_ALL_DOCSIZE, 0); - } - if( p->bHasStat ){ - fts3SqlExec(&rc, p, SQL_DELETE_ALL_STAT, 0); - } - return rc; -} + if( nList>0 && fts3SegReaderIsPending(apSegment[0]) ){ + rc = fts3MsrBufferData(pMsr, pList, nList+1); + if( rc!=SQLITE_OK ) return rc; + assert( (pMsr->aBuffer[nList] & 0xFE)==0x00 ); + pList = pMsr->aBuffer; + } -/* -** The first element in the apVal[] array is assumed to contain the docid -** (an integer) of a row about to be deleted. Remove all terms from the -** full-text index. -*/ -static void fts3DeleteTerms( - int *pRC, /* Result code */ - Fts3Table *p, /* The FTS table to delete from */ - sqlite3_value *pRowid, /* The docid to be deleted */ - u32 *aSz /* Sizes of deleted document written here */ -){ - int rc; - sqlite3_stmt *pSelect; + if( pMsr->iColFilter>=0 ){ + fts3ColumnFilter(pMsr->iColFilter, 1, &pList, &nList); + } - if( *pRC ) return; - rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pSelect, &pRowid); - if( rc==SQLITE_OK ){ - if( SQLITE_ROW==sqlite3_step(pSelect) ){ - int i; - for(i=1; i<=p->nColumn; i++){ - const char *zText = (const char *)sqlite3_column_text(pSelect, i); - rc = fts3PendingTermsAdd(p, zText, -1, &aSz[i-1]); - if( rc!=SQLITE_OK ){ - sqlite3_reset(pSelect); - *pRC = rc; - return; - } - aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i); + if( nList>0 ){ + *paPoslist = pList; + *piDocid = iDocid; + *pnPoslist = nList; + break; } } - rc = sqlite3_reset(pSelect); - }else{ - sqlite3_reset(pSelect); } - *pRC = rc; -} -/* -** Forward declaration to account for the circular dependency between -** functions fts3SegmentMerge() and fts3AllocateSegdirIdx(). -*/ -static int fts3SegmentMerge(Fts3Table *, int, int); + return SQLITE_OK; +} -/* -** This function allocates a new level iLevel index in the segdir table. -** Usually, indexes are allocated within a level sequentially starting -** with 0, so the allocated index is one greater than the value returned -** by: -** -** SELECT max(idx) FROM %_segdir WHERE level = :iLevel -** -** However, if there are already FTS3_MERGE_COUNT indexes at the requested -** level, they are merged into a single level (iLevel+1) segment and the -** allocated index is 0. -** -** If successful, *piIdx is set to the allocated index slot and SQLITE_OK -** returned. Otherwise, an SQLite error code is returned. -*/ -static int fts3AllocateSegdirIdx( - Fts3Table *p, - int iIndex, /* Index for p->aIndex */ - int iLevel, - int *piIdx +static int fts3SegReaderStart( + Fts3Table *p, /* Virtual table handle */ + Fts3MultiSegReader *pCsr, /* Cursor object */ + const char *zTerm, /* Term searched for (or NULL) */ + int nTerm /* Length of zTerm in bytes */ ){ - int rc; /* Return Code */ - sqlite3_stmt *pNextIdx; /* Query for next idx at level iLevel */ - int iNext = 0; /* Result of query pNextIdx */ + int i; + int nSeg = pCsr->nSegment; - /* Set variable iNext to the next available segdir index at level iLevel. */ - rc = fts3SqlStmt(p, SQL_NEXT_SEGMENT_INDEX, &pNextIdx, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pNextIdx, 1, iIndex*FTS3_SEGDIR_MAXLEVEL + iLevel); - if( SQLITE_ROW==sqlite3_step(pNextIdx) ){ - iNext = sqlite3_column_int(pNextIdx, 0); - } - rc = sqlite3_reset(pNextIdx); - } + /* If the Fts3SegFilter defines a specific term (or term prefix) to search + ** for, then advance each segment iterator until it points to a term of + ** equal or greater value than the specified term. This prevents many + ** unnecessary merge/sort operations for the case where single segment + ** b-tree leaf nodes contain more than one term. + */ + for(i=0; pCsr->bRestart==0 && inSegment; i++){ + int res = 0; + Fts3SegReader *pSeg = pCsr->apSegment[i]; + do { + int rc = fts3SegReaderNext(p, pSeg, 0); + if( rc!=SQLITE_OK ) return rc; + }while( zTerm && (res = fts3SegReaderTermCmp(pSeg, zTerm, nTerm))<0 ); - if( rc==SQLITE_OK ){ - /* If iNext is FTS3_MERGE_COUNT, indicating that level iLevel is already - ** full, merge all segments in level iLevel into a single iLevel+1 - ** segment and allocate (newly freed) index 0 at level iLevel. Otherwise, - ** if iNext is less than FTS3_MERGE_COUNT, allocate index iNext. - */ - if( iNext>=FTS3_MERGE_COUNT ){ - rc = fts3SegmentMerge(p, iIndex, iLevel); - *piIdx = 0; - }else{ - *piIdx = iNext; + if( pSeg->bLookup && res!=0 ){ + fts3SegReaderSetEof(pSeg); } } + fts3SegReaderSort(pCsr->apSegment, nSeg, nSeg, fts3SegReaderCmp); - return rc; + return SQLITE_OK; } -/* -** The %_segments table is declared as follows: -** -** CREATE TABLE %_segments(blockid INTEGER PRIMARY KEY, block BLOB) -** -** This function reads data from a single row of the %_segments table. The -** specific row is identified by the iBlockid parameter. If paBlob is not -** NULL, then a buffer is allocated using sqlite3_malloc() and populated -** with the contents of the blob stored in the "block" column of the -** identified table row is. Whether or not paBlob is NULL, *pnBlob is set -** to the size of the blob in bytes before returning. -** -** If an error occurs, or the table does not contain the specified row, -** an SQLite error code is returned. Otherwise, SQLITE_OK is returned. If -** paBlob is non-NULL, then it is the responsibility of the caller to -** eventually free the returned buffer. -** -** This function may leave an open sqlite3_blob* handle in the -** Fts3Table.pSegments variable. This handle is reused by subsequent calls -** to this function. The handle may be closed by calling the -** sqlite3Fts3SegmentsClose() function. Reusing a blob handle is a handy -** performance improvement, but the blob handle should always be closed -** before control is returned to the user (to prevent a lock being held -** on the database file for longer than necessary). Thus, any virtual table -** method (xFilter etc.) that may directly or indirectly call this function -** must call sqlite3Fts3SegmentsClose() before returning. -*/ -SQLITE_PRIVATE int sqlite3Fts3ReadBlock( - Fts3Table *p, /* FTS3 table handle */ - sqlite3_int64 iBlockid, /* Access the row with blockid=$iBlockid */ - char **paBlob, /* OUT: Blob data in malloc'd buffer */ - int *pnBlob, /* OUT: Size of blob data */ - int *pnLoad /* OUT: Bytes actually loaded */ +SQLITE_PRIVATE int sqlite3Fts3SegReaderStart( + Fts3Table *p, /* Virtual table handle */ + Fts3MultiSegReader *pCsr, /* Cursor object */ + Fts3SegFilter *pFilter /* Restrictions on range of iteration */ ){ - int rc; /* Return code */ + pCsr->pFilter = pFilter; + return fts3SegReaderStart(p, pCsr, pFilter->zTerm, pFilter->nTerm); +} - /* pnBlob must be non-NULL. paBlob may be NULL or non-NULL. */ - assert( pnBlob); +SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart( + Fts3Table *p, /* Virtual table handle */ + Fts3MultiSegReader *pCsr, /* Cursor object */ + int iCol, /* Column to match on. */ + const char *zTerm, /* Term to iterate through a doclist for */ + int nTerm /* Number of bytes in zTerm */ +){ + int i; + int rc; + int nSegment = pCsr->nSegment; + int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( + p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp + ); - if( p->pSegments ){ - rc = sqlite3_blob_reopen(p->pSegments, iBlockid); - }else{ - if( 0==p->zSegmentsTbl ){ - p->zSegmentsTbl = sqlite3_mprintf("%s_segments", p->zName); - if( 0==p->zSegmentsTbl ) return SQLITE_NOMEM; + assert( pCsr->pFilter==0 ); + assert( zTerm && nTerm>0 ); + + /* Advance each segment iterator until it points to the term zTerm/nTerm. */ + rc = fts3SegReaderStart(p, pCsr, zTerm, nTerm); + if( rc!=SQLITE_OK ) return rc; + + /* Determine how many of the segments actually point to zTerm/nTerm. */ + for(i=0; iapSegment[i]; + if( !pSeg->aNode || fts3SegReaderTermCmp(pSeg, zTerm, nTerm) ){ + break; } - rc = sqlite3_blob_open( - p->db, p->zDb, p->zSegmentsTbl, "block", iBlockid, 0, &p->pSegments - ); } + pCsr->nAdvance = i; - if( rc==SQLITE_OK ){ - int nByte = sqlite3_blob_bytes(p->pSegments); - *pnBlob = nByte; - if( paBlob ){ - char *aByte = sqlite3_malloc(nByte + FTS3_NODE_PADDING); - if( !aByte ){ - rc = SQLITE_NOMEM; - }else{ - if( pnLoad && nByte>(FTS3_NODE_CHUNK_THRESHOLD) ){ - nByte = FTS3_NODE_CHUNKSIZE; - *pnLoad = nByte; - } - rc = sqlite3_blob_read(p->pSegments, aByte, nByte, 0); - memset(&aByte[nByte], 0, FTS3_NODE_PADDING); - if( rc!=SQLITE_OK ){ - sqlite3_free(aByte); - aByte = 0; - } - } - *paBlob = aByte; - } + /* Advance each of the segments to point to the first docid. */ + for(i=0; inAdvance; i++){ + rc = fts3SegReaderFirstDocid(p, pCsr->apSegment[i]); + if( rc!=SQLITE_OK ) return rc; } + fts3SegReaderSort(pCsr->apSegment, i, i, xCmp); - return rc; + assert( iCol<0 || iColnColumn ); + pCsr->iColFilter = iCol; + + return SQLITE_OK; } /* -** Close the blob handle at p->pSegments, if it is open. See comments above -** the sqlite3Fts3ReadBlock() function for details. +** This function is called on a MultiSegReader that has been started using +** sqlite3Fts3MsrIncrStart(). One or more calls to MsrIncrNext() may also +** have been made. Calling this function puts the MultiSegReader in such +** a state that if the next two calls are: +** +** sqlite3Fts3SegReaderStart() +** sqlite3Fts3SegReaderStep() +** +** then the entire doclist for the term is available in +** MultiSegReader.aDoclist/nDoclist. */ -SQLITE_PRIVATE void sqlite3Fts3SegmentsClose(Fts3Table *p){ - sqlite3_blob_close(p->pSegments); - p->pSegments = 0; -} - -static int fts3SegReaderIncrRead(Fts3SegReader *pReader){ - int nRead; /* Number of bytes to read */ - int rc; /* Return code */ +SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr){ + int i; /* Used to iterate through segment-readers */ - nRead = MIN(pReader->nNode - pReader->nPopulate, FTS3_NODE_CHUNKSIZE); - rc = sqlite3_blob_read( - pReader->pBlob, - &pReader->aNode[pReader->nPopulate], - nRead, - pReader->nPopulate - ); + assert( pCsr->zTerm==0 ); + assert( pCsr->nTerm==0 ); + assert( pCsr->aDoclist==0 ); + assert( pCsr->nDoclist==0 ); - if( rc==SQLITE_OK ){ - pReader->nPopulate += nRead; - memset(&pReader->aNode[pReader->nPopulate], 0, FTS3_NODE_PADDING); - if( pReader->nPopulate==pReader->nNode ){ - sqlite3_blob_close(pReader->pBlob); - pReader->pBlob = 0; - pReader->nPopulate = 0; - } + pCsr->nAdvance = 0; + pCsr->bRestart = 1; + for(i=0; inSegment; i++){ + pCsr->apSegment[i]->pOffsetList = 0; + pCsr->apSegment[i]->nOffsetList = 0; + pCsr->apSegment[i]->iDocid = 0; } - return rc; -} -static int fts3SegReaderRequire(Fts3SegReader *pReader, char *pFrom, int nByte){ - int rc = SQLITE_OK; - assert( !pReader->pBlob - || (pFrom>=pReader->aNode && pFrom<&pReader->aNode[pReader->nNode]) - ); - while( pReader->pBlob && rc==SQLITE_OK - && (pFrom - pReader->aNode + nByte)>pReader->nPopulate - ){ - rc = fts3SegReaderIncrRead(pReader); - } - return rc; + return SQLITE_OK; } -/* -** Move the iterator passed as the first argument to the next term in the -** segment. If successful, SQLITE_OK is returned. If there is no next term, -** SQLITE_DONE. Otherwise, an SQLite error code. -*/ -static int fts3SegReaderNext( - Fts3Table *p, - Fts3SegReader *pReader, - int bIncr + +SQLITE_PRIVATE int sqlite3Fts3SegReaderStep( + Fts3Table *p, /* Virtual table handle */ + Fts3MultiSegReader *pCsr /* Cursor object */ ){ - int rc; /* Return code of various sub-routines */ - char *pNext; /* Cursor variable */ - int nPrefix; /* Number of bytes in term prefix */ - int nSuffix; /* Number of bytes in term suffix */ + int rc = SQLITE_OK; - if( !pReader->aDoclist ){ - pNext = pReader->aNode; - }else{ - pNext = &pReader->aDoclist[pReader->nDoclist]; - } + int isIgnoreEmpty = (pCsr->pFilter->flags & FTS3_SEGMENT_IGNORE_EMPTY); + int isRequirePos = (pCsr->pFilter->flags & FTS3_SEGMENT_REQUIRE_POS); + int isColFilter = (pCsr->pFilter->flags & FTS3_SEGMENT_COLUMN_FILTER); + int isPrefix = (pCsr->pFilter->flags & FTS3_SEGMENT_PREFIX); + int isScan = (pCsr->pFilter->flags & FTS3_SEGMENT_SCAN); + int isFirst = (pCsr->pFilter->flags & FTS3_SEGMENT_FIRST); - if( !pNext || pNext>=&pReader->aNode[pReader->nNode] ){ + Fts3SegReader **apSegment = pCsr->apSegment; + int nSegment = pCsr->nSegment; + Fts3SegFilter *pFilter = pCsr->pFilter; + int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( + p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp + ); - if( fts3SegReaderIsPending(pReader) ){ - Fts3HashElem *pElem = *(pReader->ppNextElem); - if( pElem==0 ){ - pReader->aNode = 0; + if( pCsr->nSegment==0 ) return SQLITE_OK; + + do { + int nMerge; + int i; + + /* Advance the first pCsr->nAdvance entries in the apSegment[] array + ** forward. Then sort the list in order of current term again. + */ + for(i=0; inAdvance; i++){ + Fts3SegReader *pSeg = apSegment[i]; + if( pSeg->bLookup ){ + fts3SegReaderSetEof(pSeg); }else{ - PendingList *pList = (PendingList *)fts3HashData(pElem); - pReader->zTerm = (char *)fts3HashKey(pElem); - pReader->nTerm = fts3HashKeysize(pElem); - pReader->nNode = pReader->nDoclist = pList->nData + 1; - pReader->aNode = pReader->aDoclist = pList->aData; - pReader->ppNextElem++; - assert( pReader->aNode ); + rc = fts3SegReaderNext(p, pSeg, 0); } - return SQLITE_OK; + if( rc!=SQLITE_OK ) return rc; } + fts3SegReaderSort(apSegment, nSegment, pCsr->nAdvance, fts3SegReaderCmp); + pCsr->nAdvance = 0; - if( !fts3SegReaderIsRootOnly(pReader) ){ - sqlite3_free(pReader->aNode); - sqlite3_blob_close(pReader->pBlob); - pReader->pBlob = 0; - } - pReader->aNode = 0; + /* If all the seg-readers are at EOF, we're finished. return SQLITE_OK. */ + assert( rc==SQLITE_OK ); + if( apSegment[0]->aNode==0 ) break; - /* If iCurrentBlock>=iLeafEndBlock, this is an EOF condition. All leaf - ** blocks have already been traversed. */ - assert( pReader->iCurrentBlock<=pReader->iLeafEndBlock ); - if( pReader->iCurrentBlock>=pReader->iLeafEndBlock ){ - return SQLITE_OK; + pCsr->nTerm = apSegment[0]->nTerm; + pCsr->zTerm = apSegment[0]->zTerm; + + /* If this is a prefix-search, and if the term that apSegment[0] points + ** to does not share a suffix with pFilter->zTerm/nTerm, then all + ** required callbacks have been made. In this case exit early. + ** + ** Similarly, if this is a search for an exact match, and the first term + ** of segment apSegment[0] is not a match, exit early. + */ + if( pFilter->zTerm && !isScan ){ + if( pCsr->nTermnTerm + || (!isPrefix && pCsr->nTerm>pFilter->nTerm) + || memcmp(pCsr->zTerm, pFilter->zTerm, pFilter->nTerm) + ){ + break; + } } - rc = sqlite3Fts3ReadBlock( - p, ++pReader->iCurrentBlock, &pReader->aNode, &pReader->nNode, - (bIncr ? &pReader->nPopulate : 0) - ); - if( rc!=SQLITE_OK ) return rc; - assert( pReader->pBlob==0 ); - if( bIncr && pReader->nPopulatenNode ){ - pReader->pBlob = p->pSegments; - p->pSegments = 0; + nMerge = 1; + while( nMergeaNode + && apSegment[nMerge]->nTerm==pCsr->nTerm + && 0==memcmp(pCsr->zTerm, apSegment[nMerge]->zTerm, pCsr->nTerm) + ){ + nMerge++; } - pNext = pReader->aNode; - } - assert( !fts3SegReaderIsPending(pReader) ); + assert( isIgnoreEmpty || (isRequirePos && !isColFilter) ); + if( nMerge==1 + && !isIgnoreEmpty + && !isFirst + && (p->bDescIdx==0 || fts3SegReaderIsPending(apSegment[0])==0) + ){ + pCsr->nDoclist = apSegment[0]->nDoclist; + if( fts3SegReaderIsPending(apSegment[0]) ){ + rc = fts3MsrBufferData(pCsr, apSegment[0]->aDoclist, pCsr->nDoclist); + pCsr->aDoclist = pCsr->aBuffer; + }else{ + pCsr->aDoclist = apSegment[0]->aDoclist; + } + if( rc==SQLITE_OK ) rc = SQLITE_ROW; + }else{ + int nDoclist = 0; /* Size of doclist */ + sqlite3_int64 iPrev = 0; /* Previous docid stored in doclist */ - rc = fts3SegReaderRequire(pReader, pNext, FTS3_VARINT_MAX*2); - if( rc!=SQLITE_OK ) return rc; - - /* Because of the FTS3_NODE_PADDING bytes of padding, the following is - ** safe (no risk of overread) even if the node data is corrupted. */ - pNext += sqlite3Fts3GetVarint32(pNext, &nPrefix); - pNext += sqlite3Fts3GetVarint32(pNext, &nSuffix); - if( nPrefix<0 || nSuffix<=0 - || &pNext[nSuffix]>&pReader->aNode[pReader->nNode] - ){ - return SQLITE_CORRUPT_VTAB; - } + /* The current term of the first nMerge entries in the array + ** of Fts3SegReader objects is the same. The doclists must be merged + ** and a single term returned with the merged doclist. + */ + for(i=0; ipOffsetList ){ + int j; /* Number of segments that share a docid */ + char *pList = 0; + int nList = 0; + int nByte; + sqlite3_int64 iDocid = apSegment[0]->iDocid; + fts3SegReaderNextDocid(p, apSegment[0], &pList, &nList); + j = 1; + while( jpOffsetList + && apSegment[j]->iDocid==iDocid + ){ + fts3SegReaderNextDocid(p, apSegment[j], 0, 0); + j++; + } - if( nPrefix+nSuffix>pReader->nTermAlloc ){ - int nNew = (nPrefix+nSuffix)*2; - char *zNew = sqlite3_realloc(pReader->zTerm, nNew); - if( !zNew ){ - return SQLITE_NOMEM; + if( isColFilter ){ + fts3ColumnFilter(pFilter->iCol, 0, &pList, &nList); + } + + if( !isIgnoreEmpty || nList>0 ){ + + /* Calculate the 'docid' delta value to write into the merged + ** doclist. */ + sqlite3_int64 iDelta; + if( p->bDescIdx && nDoclist>0 ){ + iDelta = iPrev - iDocid; + }else{ + iDelta = iDocid - iPrev; + } + assert( iDelta>0 || (nDoclist==0 && iDelta==iDocid) ); + assert( nDoclist>0 || iDelta==iDocid ); + + nByte = sqlite3Fts3VarintLen(iDelta) + (isRequirePos?nList+1:0); + if( nDoclist+nByte>pCsr->nBuffer ){ + char *aNew; + pCsr->nBuffer = (nDoclist+nByte)*2; + aNew = sqlite3_realloc(pCsr->aBuffer, pCsr->nBuffer); + if( !aNew ){ + return SQLITE_NOMEM; + } + pCsr->aBuffer = aNew; + } + + if( isFirst ){ + char *a = &pCsr->aBuffer[nDoclist]; + int nWrite; + + nWrite = sqlite3Fts3FirstFilter(iDelta, pList, nList, a); + if( nWrite ){ + iPrev = iDocid; + nDoclist += nWrite; + } + }else{ + nDoclist += sqlite3Fts3PutVarint(&pCsr->aBuffer[nDoclist], iDelta); + iPrev = iDocid; + if( isRequirePos ){ + memcpy(&pCsr->aBuffer[nDoclist], pList, nList); + nDoclist += nList; + pCsr->aBuffer[nDoclist++] = '\0'; + } + } + } + + fts3SegReaderSort(apSegment, nMerge, j, xCmp); + } + if( nDoclist>0 ){ + pCsr->aDoclist = pCsr->aBuffer; + pCsr->nDoclist = nDoclist; + rc = SQLITE_ROW; + } } - pReader->zTerm = zNew; - pReader->nTermAlloc = nNew; - } + pCsr->nAdvance = nMerge; + }while( rc==SQLITE_OK ); - rc = fts3SegReaderRequire(pReader, pNext, nSuffix+FTS3_VARINT_MAX); - if( rc!=SQLITE_OK ) return rc; + return rc; +} - memcpy(&pReader->zTerm[nPrefix], pNext, nSuffix); - pReader->nTerm = nPrefix+nSuffix; - pNext += nSuffix; - pNext += sqlite3Fts3GetVarint32(pNext, &pReader->nDoclist); - pReader->aDoclist = pNext; - pReader->pOffsetList = 0; - /* Check that the doclist does not appear to extend past the end of the - ** b-tree node. And that the final byte of the doclist is 0x00. If either - ** of these statements is untrue, then the data structure is corrupt. - */ - if( &pReader->aDoclist[pReader->nDoclist]>&pReader->aNode[pReader->nNode] - || (pReader->nPopulate==0 && pReader->aDoclist[pReader->nDoclist-1]) - ){ - return SQLITE_CORRUPT_VTAB; +SQLITE_PRIVATE void sqlite3Fts3SegReaderFinish( + Fts3MultiSegReader *pCsr /* Cursor object */ +){ + if( pCsr ){ + int i; + for(i=0; inSegment; i++){ + sqlite3Fts3SegReaderFree(pCsr->apSegment[i]); + } + sqlite3_free(pCsr->apSegment); + sqlite3_free(pCsr->aBuffer); + + pCsr->nSegment = 0; + pCsr->apSegment = 0; + pCsr->aBuffer = 0; } - return SQLITE_OK; } /* -** Set the SegReader to point to the first docid in the doclist associated -** with the current term. +** Decode the "end_block" field, selected by column iCol of the SELECT +** statement passed as the first argument. +** +** The "end_block" field may contain either an integer, or a text field +** containing the text representation of two non-negative integers separated +** by one or more space (0x20) characters. In the first case, set *piEndBlock +** to the integer value and *pnByte to zero before returning. In the second, +** set *piEndBlock to the first value and *pnByte to the second. */ -static int fts3SegReaderFirstDocid(Fts3Table *pTab, Fts3SegReader *pReader){ - int rc = SQLITE_OK; - assert( pReader->aDoclist ); - assert( !pReader->pOffsetList ); - if( pTab->bDescIdx && fts3SegReaderIsPending(pReader) ){ - u8 bEof = 0; - pReader->iDocid = 0; - pReader->nOffsetList = 0; - sqlite3Fts3DoclistPrev(0, - pReader->aDoclist, pReader->nDoclist, &pReader->pOffsetList, - &pReader->iDocid, &pReader->nOffsetList, &bEof - ); - }else{ - rc = fts3SegReaderRequire(pReader, pReader->aDoclist, FTS3_VARINT_MAX); - if( rc==SQLITE_OK ){ - int n = sqlite3Fts3GetVarint(pReader->aDoclist, &pReader->iDocid); - pReader->pOffsetList = &pReader->aDoclist[n]; +static void fts3ReadEndBlockField( + sqlite3_stmt *pStmt, + int iCol, + i64 *piEndBlock, + i64 *pnByte +){ + const unsigned char *zText = sqlite3_column_text(pStmt, iCol); + if( zText ){ + int i; + int iMul = 1; + i64 iVal = 0; + for(i=0; zText[i]>='0' && zText[i]<='9'; i++){ + iVal = iVal*10 + (zText[i] - '0'); + } + *piEndBlock = iVal; + while( zText[i]==' ' ) i++; + iVal = 0; + if( zText[i]=='-' ){ + i++; + iMul = -1; + } + for(/* no-op */; zText[i]>='0' && zText[i]<='9'; i++){ + iVal = iVal*10 + (zText[i] - '0'); } + *pnByte = (iVal * (i64)iMul); } - return rc; } + /* -** Advance the SegReader to point to the next docid in the doclist -** associated with the current term. -** -** If arguments ppOffsetList and pnOffsetList are not NULL, then -** *ppOffsetList is set to point to the first column-offset list -** in the doclist entry (i.e. immediately past the docid varint). -** *pnOffsetList is set to the length of the set of column-offset -** lists, not including the nul-terminator byte. For example: +** A segment of size nByte bytes has just been written to absolute level +** iAbsLevel. Promote any segments that should be promoted as a result. */ -static int fts3SegReaderNextDocid( - Fts3Table *pTab, - Fts3SegReader *pReader, /* Reader to advance to next docid */ - char **ppOffsetList, /* OUT: Pointer to current position-list */ - int *pnOffsetList /* OUT: Length of *ppOffsetList in bytes */ +static int fts3PromoteSegments( + Fts3Table *p, /* FTS table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level just updated */ + sqlite3_int64 nByte /* Size of new segment at iAbsLevel */ ){ int rc = SQLITE_OK; - char *p = pReader->pOffsetList; - char c = 0; + sqlite3_stmt *pRange; - assert( p ); + rc = fts3SqlStmt(p, SQL_SELECT_LEVEL_RANGE2, &pRange, 0); - if( pTab->bDescIdx && fts3SegReaderIsPending(pReader) ){ - /* A pending-terms seg-reader for an FTS4 table that uses order=desc. - ** Pending-terms doclists are always built up in ascending order, so - ** we have to iterate through them backwards here. */ - u8 bEof = 0; - if( ppOffsetList ){ - *ppOffsetList = pReader->pOffsetList; - *pnOffsetList = pReader->nOffsetList - 1; - } - sqlite3Fts3DoclistPrev(0, - pReader->aDoclist, pReader->nDoclist, &p, &pReader->iDocid, - &pReader->nOffsetList, &bEof - ); - if( bEof ){ - pReader->pOffsetList = 0; - }else{ - pReader->pOffsetList = p; + if( rc==SQLITE_OK ){ + int bOk = 0; + i64 iLast = (iAbsLevel/FTS3_SEGDIR_MAXLEVEL + 1) * FTS3_SEGDIR_MAXLEVEL - 1; + i64 nLimit = (nByte*3)/2; + + /* Loop through all entries in the %_segdir table corresponding to + ** segments in this index on levels greater than iAbsLevel. If there is + ** at least one such segment, and it is possible to determine that all + ** such segments are smaller than nLimit bytes in size, they will be + ** promoted to level iAbsLevel. */ + sqlite3_bind_int64(pRange, 1, iAbsLevel+1); + sqlite3_bind_int64(pRange, 2, iLast); + while( SQLITE_ROW==sqlite3_step(pRange) ){ + i64 nSize = 0, dummy; + fts3ReadEndBlockField(pRange, 2, &dummy, &nSize); + if( nSize<=0 || nSize>nLimit ){ + /* If nSize==0, then the %_segdir.end_block field does not not + ** contain a size value. This happens if it was written by an + ** old version of FTS. In this case it is not possible to determine + ** the size of the segment, and so segment promotion does not + ** take place. */ + bOk = 0; + break; + } + bOk = 1; } - }else{ - char *pEnd = &pReader->aDoclist[pReader->nDoclist]; + rc = sqlite3_reset(pRange); - /* Pointer p currently points at the first byte of an offset list. The - ** following block advances it to point one byte past the end of - ** the same offset list. */ - while( 1 ){ - - /* The following line of code (and the "p++" below the while() loop) is - ** normally all that is required to move pointer p to the desired - ** position. The exception is if this node is being loaded from disk - ** incrementally and pointer "p" now points to the first byte passed - ** the populated part of pReader->aNode[]. - */ - while( *p | c ) c = *p++ & 0x80; - assert( *p==0 ); - - if( pReader->pBlob==0 || p<&pReader->aNode[pReader->nPopulate] ) break; - rc = fts3SegReaderIncrRead(pReader); - if( rc!=SQLITE_OK ) return rc; - } - p++; - - /* If required, populate the output variables with a pointer to and the - ** size of the previous offset-list. - */ - if( ppOffsetList ){ - *ppOffsetList = pReader->pOffsetList; - *pnOffsetList = (int)(p - pReader->pOffsetList - 1); - } + if( bOk ){ + int iIdx = 0; + sqlite3_stmt *pUpdate1; + sqlite3_stmt *pUpdate2; - while( p=pEnd ){ - pReader->pOffsetList = 0; - }else{ - rc = fts3SegReaderRequire(pReader, p, FTS3_VARINT_MAX); if( rc==SQLITE_OK ){ - sqlite3_int64 iDelta; - pReader->pOffsetList = p + sqlite3Fts3GetVarint(p, &iDelta); - if( pTab->bDescIdx ){ - pReader->iDocid -= iDelta; - }else{ - pReader->iDocid += iDelta; + rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL_IDX, &pUpdate1, 0); + } + if( rc==SQLITE_OK ){ + rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL, &pUpdate2, 0); + } + + if( rc==SQLITE_OK ){ + + /* Loop through all %_segdir entries for segments in this index with + ** levels equal to or greater than iAbsLevel. As each entry is visited, + ** updated it to set (level = -1) and (idx = N), where N is 0 for the + ** oldest segment in the range, 1 for the next oldest, and so on. + ** + ** In other words, move all segments being promoted to level -1, + ** setting the "idx" fields as appropriate to keep them in the same + ** order. The contents of level -1 (which is never used, except + ** transiently here), will be moved back to level iAbsLevel below. */ + sqlite3_bind_int64(pRange, 1, iAbsLevel); + while( SQLITE_ROW==sqlite3_step(pRange) ){ + sqlite3_bind_int(pUpdate1, 1, iIdx++); + sqlite3_bind_int(pUpdate1, 2, sqlite3_column_int(pRange, 0)); + sqlite3_bind_int(pUpdate1, 3, sqlite3_column_int(pRange, 1)); + sqlite3_step(pUpdate1); + rc = sqlite3_reset(pUpdate1); + if( rc!=SQLITE_OK ){ + sqlite3_reset(pRange); + break; + } } } + if( rc==SQLITE_OK ){ + rc = sqlite3_reset(pRange); + } + + /* Move level -1 to level iAbsLevel */ + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pUpdate2, 1, iAbsLevel); + sqlite3_step(pUpdate2); + rc = sqlite3_reset(pUpdate2); + } } } - return SQLITE_OK; -} + return rc; +} -SQLITE_PRIVATE int sqlite3Fts3MsrOvfl( - Fts3Cursor *pCsr, - Fts3MultiSegReader *pMsr, - int *pnOvfl +/* +** Merge all level iLevel segments in the database into a single +** iLevel+1 segment. Or, if iLevel<0, merge all segments into a +** single segment with a level equal to the numerically largest level +** currently present in the database. +** +** If this function is called with iLevel<0, but there is only one +** segment in the database, SQLITE_DONE is returned immediately. +** Otherwise, if successful, SQLITE_OK is returned. If an error occurs, +** an SQLite error code is returned. +*/ +static int fts3SegmentMerge( + Fts3Table *p, + int iLangid, /* Language id to merge */ + int iIndex, /* Index in p->aIndex[] to merge */ + int iLevel /* Level to merge */ ){ - Fts3Table *p = (Fts3Table*)pCsr->base.pVtab; - int nOvfl = 0; - int ii; - int rc = SQLITE_OK; - int pgsz = p->nPgsz; + int rc; /* Return code */ + int iIdx = 0; /* Index of new segment */ + sqlite3_int64 iNewLevel = 0; /* Level/index to create new segment at */ + SegmentWriter *pWriter = 0; /* Used to write the new, merged, segment */ + Fts3SegFilter filter; /* Segment term filter condition */ + Fts3MultiSegReader csr; /* Cursor to iterate through level(s) */ + int bIgnoreEmpty = 0; /* True to ignore empty segments */ + i64 iMaxLevel = 0; /* Max level number for this index/langid */ - assert( p->bHasStat ); - assert( pgsz>0 ); + assert( iLevel==FTS3_SEGCURSOR_ALL + || iLevel==FTS3_SEGCURSOR_PENDING + || iLevel>=0 + ); + assert( iLevel=0 && iIndexnIndex ); - for(ii=0; rc==SQLITE_OK && iinSegment; ii++){ - Fts3SegReader *pReader = pMsr->apSegment[ii]; - if( !fts3SegReaderIsPending(pReader) - && !fts3SegReaderIsRootOnly(pReader) - ){ - sqlite3_int64 jj; - for(jj=pReader->iStartBlock; jj<=pReader->iLeafEndBlock; jj++){ - int nBlob; - rc = sqlite3Fts3ReadBlock(p, jj, 0, &nBlob, 0); - if( rc!=SQLITE_OK ) break; - if( (nBlob+35)>pgsz ){ - nOvfl += (nBlob + 34)/pgsz; - } + rc = sqlite3Fts3SegReaderCursor(p, iLangid, iIndex, iLevel, 0, 0, 1, 0, &csr); + if( rc!=SQLITE_OK || csr.nSegment==0 ) goto finished; + + if( iLevel!=FTS3_SEGCURSOR_PENDING ){ + rc = fts3SegmentMaxLevel(p, iLangid, iIndex, &iMaxLevel); + if( rc!=SQLITE_OK ) goto finished; + } + + if( iLevel==FTS3_SEGCURSOR_ALL ){ + /* This call is to merge all segments in the database to a single + ** segment. The level of the new segment is equal to the numerically + ** greatest segment level currently present in the database for this + ** index. The idx of the new segment is always 0. */ + if( csr.nSegment==1 ){ + rc = SQLITE_DONE; + goto finished; + } + iNewLevel = iMaxLevel; + bIgnoreEmpty = 1; + + }else{ + /* This call is to merge all segments at level iLevel. find the next + ** available segment index at level iLevel+1. The call to + ** fts3AllocateSegdirIdx() will merge the segments at level iLevel+1 to + ** a single iLevel+2 segment if necessary. */ + assert( FTS3_SEGCURSOR_PENDING==-1 ); + iNewLevel = getAbsoluteLevel(p, iLangid, iIndex, iLevel+1); + rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, iLevel+1, &iIdx); + bIgnoreEmpty = (iLevel!=FTS3_SEGCURSOR_PENDING) && (iNewLevel>iMaxLevel); + } + if( rc!=SQLITE_OK ) goto finished; + + assert( csr.nSegment>0 ); + assert( iNewLevel>=getAbsoluteLevel(p, iLangid, iIndex, 0) ); + assert( iNewLevelnLeafData); } } } - *pnOvfl = nOvfl; + + finished: + fts3SegWriterFree(pWriter); + sqlite3Fts3SegReaderFinish(&csr); return rc; } -/* -** Free all allocations associated with the iterator passed as the -** second argument. + +/* +** Flush the contents of pendingTerms to level 0 segments. */ -SQLITE_PRIVATE void sqlite3Fts3SegReaderFree(Fts3SegReader *pReader){ - if( pReader && !fts3SegReaderIsPending(pReader) ){ - sqlite3_free(pReader->zTerm); - if( !fts3SegReaderIsRootOnly(pReader) ){ - sqlite3_free(pReader->aNode); - sqlite3_blob_close(pReader->pBlob); +SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *p){ + int rc = SQLITE_OK; + int i; + + for(i=0; rc==SQLITE_OK && inIndex; i++){ + rc = fts3SegmentMerge(p, p->iPrevLangid, i, FTS3_SEGCURSOR_PENDING); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + } + sqlite3Fts3PendingTermsClear(p); + + /* Determine the auto-incr-merge setting if unknown. If enabled, + ** estimate the number of leaf blocks of content to be written + */ + if( rc==SQLITE_OK && p->bHasStat + && p->nAutoincrmerge==0xff && p->nLeafAdd>0 + ){ + sqlite3_stmt *pStmt = 0; + rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE); + rc = sqlite3_step(pStmt); + if( rc==SQLITE_ROW ){ + p->nAutoincrmerge = sqlite3_column_int(pStmt, 0); + if( p->nAutoincrmerge==1 ) p->nAutoincrmerge = 8; + }else if( rc==SQLITE_DONE ){ + p->nAutoincrmerge = 0; + } + rc = sqlite3_reset(pStmt); } } - sqlite3_free(pReader); + return rc; } /* -** Allocate a new SegReader object. +** Encode N integers as varints into a blob. */ -SQLITE_PRIVATE int sqlite3Fts3SegReaderNew( - int iAge, /* Segment "age". */ - sqlite3_int64 iStartLeaf, /* First leaf to traverse */ - sqlite3_int64 iEndLeaf, /* Final leaf to traverse */ - sqlite3_int64 iEndBlock, /* Final block of segment */ - const char *zRoot, /* Buffer containing root node */ - int nRoot, /* Size of buffer containing root node */ - Fts3SegReader **ppReader /* OUT: Allocated Fts3SegReader */ +static void fts3EncodeIntArray( + int N, /* The number of integers to encode */ + u32 *a, /* The integer values */ + char *zBuf, /* Write the BLOB here */ + int *pNBuf /* Write number of bytes if zBuf[] used here */ ){ - int rc = SQLITE_OK; /* Return code */ - Fts3SegReader *pReader; /* Newly allocated SegReader object */ - int nExtra = 0; /* Bytes to allocate segment root node */ - - assert( iStartLeaf<=iEndLeaf ); - if( iStartLeaf==0 ){ - nExtra = nRoot + FTS3_NODE_PADDING; - } - - pReader = (Fts3SegReader *)sqlite3_malloc(sizeof(Fts3SegReader) + nExtra); - if( !pReader ){ - return SQLITE_NOMEM; - } - memset(pReader, 0, sizeof(Fts3SegReader)); - pReader->iIdx = iAge; - pReader->iStartBlock = iStartLeaf; - pReader->iLeafEndBlock = iEndLeaf; - pReader->iEndBlock = iEndBlock; - - if( nExtra ){ - /* The entire segment is stored in the root node. */ - pReader->aNode = (char *)&pReader[1]; - pReader->nNode = nRoot; - memcpy(pReader->aNode, zRoot, nRoot); - memset(&pReader->aNode[nRoot], 0, FTS3_NODE_PADDING); - }else{ - pReader->iCurrentBlock = iStartLeaf-1; + int i, j; + for(i=j=0; iiPrevDocid. The sizes are encoded as +** a blob of varints. */ -static int fts3CompareElemByTerm(const void *lhs, const void *rhs){ - char *z1 = fts3HashKey(*(Fts3HashElem **)lhs); - char *z2 = fts3HashKey(*(Fts3HashElem **)rhs); - int n1 = fts3HashKeysize(*(Fts3HashElem **)lhs); - int n2 = fts3HashKeysize(*(Fts3HashElem **)rhs); +static void fts3InsertDocsize( + int *pRC, /* Result code */ + Fts3Table *p, /* Table into which to insert */ + u32 *aSz /* Sizes of each column, in tokens */ +){ + char *pBlob; /* The BLOB encoding of the document size */ + int nBlob; /* Number of bytes in the BLOB */ + sqlite3_stmt *pStmt; /* Statement used to insert the encoding */ + int rc; /* Result code from subfunctions */ - int n = (n1nColumn ); + if( pBlob==0 ){ + *pRC = SQLITE_NOMEM; + return; } - return c; + fts3EncodeIntArray(p->nColumn, aSz, pBlob, &nBlob); + rc = fts3SqlStmt(p, SQL_REPLACE_DOCSIZE, &pStmt, 0); + if( rc ){ + sqlite3_free(pBlob); + *pRC = rc; + return; + } + sqlite3_bind_int64(pStmt, 1, p->iPrevDocid); + sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, sqlite3_free); + sqlite3_step(pStmt); + *pRC = sqlite3_reset(pStmt); } /* -** This function is used to allocate an Fts3SegReader that iterates through -** a subset of the terms stored in the Fts3Table.pendingTerms array. +** Record 0 of the %_stat table contains a blob consisting of N varints, +** where N is the number of user defined columns in the fts3 table plus +** two. If nCol is the number of user defined columns, then values of the +** varints are set as follows: ** -** If the isPrefixIter parameter is zero, then the returned SegReader iterates -** through each term in the pending-terms table. Or, if isPrefixIter is -** non-zero, it iterates through each term and its prefixes. For example, if -** the pending terms hash table contains the terms "sqlite", "mysql" and -** "firebird", then the iterator visits the following 'terms' (in the order -** shown): +** Varint 0: Total number of rows in the table. ** -** f fi fir fire fireb firebi firebir firebird -** m my mys mysq mysql -** s sq sql sqli sqlit sqlite +** Varint 1..nCol: For each column, the total number of tokens stored in +** the column for all rows of the table. ** -** Whereas if isPrefixIter is zero, the terms visited are: +** Varint 1+nCol: The total size, in bytes, of all text values in all +** columns of all rows of the table. ** -** firebird mysql sqlite */ -SQLITE_PRIVATE int sqlite3Fts3SegReaderPending( - Fts3Table *p, /* Virtual table handle */ - int iIndex, /* Index for p->aIndex */ - const char *zTerm, /* Term to search for */ - int nTerm, /* Size of buffer zTerm */ - int bPrefix, /* True for a prefix iterator */ - Fts3SegReader **ppReader /* OUT: SegReader for pending-terms */ +static void fts3UpdateDocTotals( + int *pRC, /* The result code */ + Fts3Table *p, /* Table being updated */ + u32 *aSzIns, /* Size increases */ + u32 *aSzDel, /* Size decreases */ + int nChng /* Change in the number of documents */ ){ - Fts3SegReader *pReader = 0; /* Fts3SegReader object to return */ - Fts3HashElem **aElem = 0; /* Array of term hash entries to scan */ - int nElem = 0; /* Size of array at aElem */ - int rc = SQLITE_OK; /* Return Code */ - Fts3Hash *pHash; - - pHash = &p->aIndex[iIndex].hPending; - if( bPrefix ){ - int nAlloc = 0; /* Size of allocated array at aElem */ - Fts3HashElem *pE = 0; /* Iterator variable */ - - for(pE=fts3HashFirst(pHash); pE; pE=fts3HashNext(pE)){ - char *zKey = (char *)fts3HashKey(pE); - int nKey = fts3HashKeysize(pE); - if( nTerm==0 || (nKey>=nTerm && 0==memcmp(zKey, zTerm, nTerm)) ){ - if( nElem==nAlloc ){ - Fts3HashElem **aElem2; - nAlloc += 16; - aElem2 = (Fts3HashElem **)sqlite3_realloc( - aElem, nAlloc*sizeof(Fts3HashElem *) - ); - if( !aElem2 ){ - rc = SQLITE_NOMEM; - nElem = 0; - break; - } - aElem = aElem2; - } - - aElem[nElem++] = pE; - } - } + char *pBlob; /* Storage for BLOB written into %_stat */ + int nBlob; /* Size of BLOB written into %_stat */ + u32 *a; /* Array of integers that becomes the BLOB */ + sqlite3_stmt *pStmt; /* Statement for reading and writing */ + int i; /* Loop counter */ + int rc; /* Result code from subfunctions */ - /* If more than one term matches the prefix, sort the Fts3HashElem - ** objects in term order using qsort(). This uses the same comparison - ** callback as is used when flushing terms to disk. - */ - if( nElem>1 ){ - qsort(aElem, nElem, sizeof(Fts3HashElem *), fts3CompareElemByTerm); - } + const int nStat = p->nColumn+2; + if( *pRC ) return; + a = sqlite3_malloc( (sizeof(u32)+10)*nStat ); + if( a==0 ){ + *pRC = SQLITE_NOMEM; + return; + } + pBlob = (char*)&a[nStat]; + rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0); + if( rc ){ + sqlite3_free(a); + *pRC = rc; + return; + } + sqlite3_bind_int(pStmt, 1, FTS_STAT_DOCTOTAL); + if( sqlite3_step(pStmt)==SQLITE_ROW ){ + fts3DecodeIntArray(nStat, a, + sqlite3_column_blob(pStmt, 0), + sqlite3_column_bytes(pStmt, 0)); }else{ - /* The query is a simple term lookup that matches at most one term in - ** the index. All that is required is a straight hash-lookup. */ - Fts3HashElem *pE = fts3HashFindElem(pHash, zTerm, nTerm); - if( pE ){ - aElem = &pE; - nElem = 1; - } + memset(a, 0, sizeof(u32)*(nStat) ); } - - if( nElem>0 ){ - int nByte = sizeof(Fts3SegReader) + (nElem+1)*sizeof(Fts3HashElem *); - pReader = (Fts3SegReader *)sqlite3_malloc(nByte); - if( !pReader ){ - rc = SQLITE_NOMEM; + rc = sqlite3_reset(pStmt); + if( rc!=SQLITE_OK ){ + sqlite3_free(a); + *pRC = rc; + return; + } + if( nChng<0 && a[0]<(u32)(-nChng) ){ + a[0] = 0; + }else{ + a[0] += nChng; + } + for(i=0; inColumn+1; i++){ + u32 x = a[i+1]; + if( x+aSzIns[i] < aSzDel[i] ){ + x = 0; }else{ - memset(pReader, 0, nByte); - pReader->iIdx = 0x7FFFFFFF; - pReader->ppNextElem = (Fts3HashElem **)&pReader[1]; - memcpy(pReader->ppNextElem, aElem, nElem*sizeof(Fts3HashElem *)); + x = x + aSzIns[i] - aSzDel[i]; } + a[i+1] = x; } - - if( bPrefix ){ - sqlite3_free(aElem); + fts3EncodeIntArray(nStat, a, pBlob, &nBlob); + rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pStmt, 0); + if( rc ){ + sqlite3_free(a); + *pRC = rc; + return; } - *ppReader = pReader; - return rc; + sqlite3_bind_int(pStmt, 1, FTS_STAT_DOCTOTAL); + sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, SQLITE_STATIC); + sqlite3_step(pStmt); + *pRC = sqlite3_reset(pStmt); + sqlite3_free(a); } /* -** Compare the entries pointed to by two Fts3SegReader structures. -** Comparison is as follows: -** -** 1) EOF is greater than not EOF. -** -** 2) The current terms (if any) are compared using memcmp(). If one -** term is a prefix of another, the longer term is considered the -** larger. -** -** 3) By segment age. An older segment is considered larger. +** Merge the entire database so that there is one segment for each +** iIndex/iLangid combination. */ -static int fts3SegReaderCmp(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ +static int fts3DoOptimize(Fts3Table *p, int bReturnDone){ + int bSeenDone = 0; int rc; - if( pLhs->aNode && pRhs->aNode ){ - int rc2 = pLhs->nTerm - pRhs->nTerm; - if( rc2<0 ){ - rc = memcmp(pLhs->zTerm, pRhs->zTerm, pLhs->nTerm); - }else{ - rc = memcmp(pLhs->zTerm, pRhs->zTerm, pRhs->nTerm); - } - if( rc==0 ){ - rc = rc2; + sqlite3_stmt *pAllLangid = 0; + + rc = fts3SqlStmt(p, SQL_SELECT_ALL_LANGID, &pAllLangid, 0); + if( rc==SQLITE_OK ){ + int rc2; + sqlite3_bind_int(pAllLangid, 1, p->nIndex); + while( sqlite3_step(pAllLangid)==SQLITE_ROW ){ + int i; + int iLangid = sqlite3_column_int(pAllLangid, 0); + for(i=0; rc==SQLITE_OK && inIndex; i++){ + rc = fts3SegmentMerge(p, iLangid, i, FTS3_SEGCURSOR_ALL); + if( rc==SQLITE_DONE ){ + bSeenDone = 1; + rc = SQLITE_OK; + } + } } - }else{ - rc = (pLhs->aNode==0) - (pRhs->aNode==0); - } - if( rc==0 ){ - rc = pRhs->iIdx - pLhs->iIdx; + rc2 = sqlite3_reset(pAllLangid); + if( rc==SQLITE_OK ) rc = rc2; } - assert( rc!=0 ); - return rc; + + sqlite3Fts3SegmentsClose(p); + sqlite3Fts3PendingTermsClear(p); + + return (rc==SQLITE_OK && bReturnDone && bSeenDone) ? SQLITE_DONE : rc; } /* -** A different comparison function for SegReader structures. In this -** version, it is assumed that each SegReader points to an entry in -** a doclist for identical terms. Comparison is made as follows: -** -** 1) EOF (end of doclist in this case) is greater than not EOF. +** This function is called when the user executes the following statement: ** -** 2) By current docid. +** INSERT INTO () VALUES('rebuild'); ** -** 3) By segment age. An older segment is considered larger. +** The entire FTS index is discarded and rebuilt. If the table is one +** created using the content=xxx option, then the new index is based on +** the current contents of the xxx table. Otherwise, it is rebuilt based +** on the contents of the %_content table. */ -static int fts3SegReaderDoclistCmp(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ - int rc = (pLhs->pOffsetList==0)-(pRhs->pOffsetList==0); - if( rc==0 ){ - if( pLhs->iDocid==pRhs->iDocid ){ - rc = pRhs->iIdx - pLhs->iIdx; +static int fts3DoRebuild(Fts3Table *p){ + int rc; /* Return Code */ + + rc = fts3DeleteAll(p, 0); + if( rc==SQLITE_OK ){ + u32 *aSz = 0; + u32 *aSzIns = 0; + u32 *aSzDel = 0; + sqlite3_stmt *pStmt = 0; + int nEntry = 0; + + /* Compose and prepare an SQL statement to loop through the content table */ + char *zSql = sqlite3_mprintf("SELECT %s" , p->zReadExprlist); + if( !zSql ){ + rc = SQLITE_NOMEM; }else{ - rc = (pLhs->iDocid > pRhs->iDocid) ? 1 : -1; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); } - } - assert( pLhs->aNode && pRhs->aNode ); - return rc; -} -static int fts3SegReaderDoclistCmpRev(Fts3SegReader *pLhs, Fts3SegReader *pRhs){ - int rc = (pLhs->pOffsetList==0)-(pRhs->pOffsetList==0); - if( rc==0 ){ - if( pLhs->iDocid==pRhs->iDocid ){ - rc = pRhs->iIdx - pLhs->iIdx; - }else{ - rc = (pLhs->iDocid < pRhs->iDocid) ? 1 : -1; + + if( rc==SQLITE_OK ){ + int nByte = sizeof(u32) * (p->nColumn+1)*3; + aSz = (u32 *)sqlite3_malloc(nByte); + if( aSz==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(aSz, 0, nByte); + aSzIns = &aSz[p->nColumn+1]; + aSzDel = &aSzIns[p->nColumn+1]; + } } - } - assert( pLhs->aNode && pRhs->aNode ); - return rc; -} -/* -** Compare the term that the Fts3SegReader object passed as the first argument -** points to with the term specified by arguments zTerm and nTerm. -** -** If the pSeg iterator is already at EOF, return 0. Otherwise, return -** -ve if the pSeg term is less than zTerm/nTerm, 0 if the two terms are -** equal, or +ve if the pSeg term is greater than zTerm/nTerm. -*/ -static int fts3SegReaderTermCmp( - Fts3SegReader *pSeg, /* Segment reader object */ - const char *zTerm, /* Term to compare to */ - int nTerm /* Size of term zTerm in bytes */ -){ - int res = 0; - if( pSeg->aNode ){ - if( pSeg->nTerm>nTerm ){ - res = memcmp(pSeg->zTerm, zTerm, nTerm); - }else{ - res = memcmp(pSeg->zTerm, zTerm, pSeg->nTerm); + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){ + int iCol; + int iLangid = langidFromSelect(p, pStmt); + rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pStmt, 0)); + memset(aSz, 0, sizeof(aSz[0]) * (p->nColumn+1)); + for(iCol=0; rc==SQLITE_OK && iColnColumn; iCol++){ + if( p->abNotindexed[iCol]==0 ){ + const char *z = (const char *) sqlite3_column_text(pStmt, iCol+1); + rc = fts3PendingTermsAdd(p, iLangid, z, iCol, &aSz[iCol]); + aSz[p->nColumn] += sqlite3_column_bytes(pStmt, iCol+1); + } + } + if( p->bHasDocsize ){ + fts3InsertDocsize(&rc, p, aSz); + } + if( rc!=SQLITE_OK ){ + sqlite3_finalize(pStmt); + pStmt = 0; + }else{ + nEntry++; + for(iCol=0; iCol<=p->nColumn; iCol++){ + aSzIns[iCol] += aSz[iCol]; + } + } } - if( res==0 ){ - res = pSeg->nTerm-nTerm; + if( p->bFts4 ){ + fts3UpdateDocTotals(&rc, p, aSzIns, aSzDel, nEntry); + } + sqlite3_free(aSz); + + if( pStmt ){ + int rc2 = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ){ + rc = rc2; + } } } - return res; + + return rc; } + /* -** Argument apSegment is an array of nSegment elements. It is known that -** the final (nSegment-nSuspect) members are already in sorted order -** (according to the comparison function provided). This function shuffles -** the array around until all entries are in sorted order. +** This function opens a cursor used to read the input data for an +** incremental merge operation. Specifically, it opens a cursor to scan +** the oldest nSeg segments (idx=0 through idx=(nSeg-1)) in absolute +** level iAbsLevel. */ -static void fts3SegReaderSort( - Fts3SegReader **apSegment, /* Array to sort entries of */ - int nSegment, /* Size of apSegment array */ - int nSuspect, /* Unsorted entry count */ - int (*xCmp)(Fts3SegReader *, Fts3SegReader *) /* Comparison function */ +static int fts3IncrmergeCsr( + Fts3Table *p, /* FTS3 table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level to open */ + int nSeg, /* Number of segments to merge */ + Fts3MultiSegReader *pCsr /* Cursor object to populate */ ){ - int i; /* Iterator variable */ - - assert( nSuspect<=nSegment ); + int rc; /* Return Code */ + sqlite3_stmt *pStmt = 0; /* Statement used to read %_segdir entry */ + int nByte; /* Bytes allocated at pCsr->apSegment[] */ - if( nSuspect==nSegment ) nSuspect--; - for(i=nSuspect-1; i>=0; i--){ - int j; - for(j=i; j<(nSegment-1); j++){ - Fts3SegReader *pTmp; - if( xCmp(apSegment[j], apSegment[j+1])<0 ) break; - pTmp = apSegment[j+1]; - apSegment[j+1] = apSegment[j]; - apSegment[j] = pTmp; - } - } + /* Allocate space for the Fts3MultiSegReader.aCsr[] array */ + memset(pCsr, 0, sizeof(*pCsr)); + nByte = sizeof(Fts3SegReader *) * nSeg; + pCsr->apSegment = (Fts3SegReader **)sqlite3_malloc(nByte); -#ifndef NDEBUG - /* Check that the list really is sorted now. */ - for(i=0; i<(nSuspect-1); i++){ - assert( xCmp(apSegment[i], apSegment[i+1])<0 ); + if( pCsr->apSegment==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pCsr->apSegment, 0, nByte); + rc = fts3SqlStmt(p, SQL_SELECT_LEVEL, &pStmt, 0); } -#endif -} - -/* -** Insert a record into the %_segments table. -*/ -static int fts3WriteSegment( - Fts3Table *p, /* Virtual table handle */ - sqlite3_int64 iBlock, /* Block id for new block */ - char *z, /* Pointer to buffer containing block data */ - int n /* Size of buffer z in bytes */ -){ - sqlite3_stmt *pStmt; - int rc = fts3SqlStmt(p, SQL_INSERT_SEGMENTS, &pStmt, 0); if( rc==SQLITE_OK ){ - sqlite3_bind_int64(pStmt, 1, iBlock); - sqlite3_bind_blob(pStmt, 2, z, n, SQLITE_STATIC); - sqlite3_step(pStmt); - rc = sqlite3_reset(pStmt); + int i; + int rc2; + sqlite3_bind_int64(pStmt, 1, iAbsLevel); + assert( pCsr->nSegment==0 ); + for(i=0; rc==SQLITE_OK && sqlite3_step(pStmt)==SQLITE_ROW && iapSegment[i] + ); + pCsr->nSegment++; + } + rc2 = sqlite3_reset(pStmt); + if( rc==SQLITE_OK ) rc = rc2; } - return rc; -} -/* -** Insert a record into the %_segdir table. -*/ -static int fts3WriteSegdir( - Fts3Table *p, /* Virtual table handle */ - int iLevel, /* Value for "level" field */ - int iIdx, /* Value for "idx" field */ - sqlite3_int64 iStartBlock, /* Value for "start_block" field */ - sqlite3_int64 iLeafEndBlock, /* Value for "leaves_end_block" field */ - sqlite3_int64 iEndBlock, /* Value for "end_block" field */ - char *zRoot, /* Blob value for "root" field */ - int nRoot /* Number of bytes in buffer zRoot */ -){ - sqlite3_stmt *pStmt; - int rc = fts3SqlStmt(p, SQL_INSERT_SEGDIR, &pStmt, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pStmt, 1, iLevel); - sqlite3_bind_int(pStmt, 2, iIdx); - sqlite3_bind_int64(pStmt, 3, iStartBlock); - sqlite3_bind_int64(pStmt, 4, iLeafEndBlock); - sqlite3_bind_int64(pStmt, 5, iEndBlock); - sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC); - sqlite3_step(pStmt); - rc = sqlite3_reset(pStmt); - } return rc; } +typedef struct IncrmergeWriter IncrmergeWriter; +typedef struct NodeWriter NodeWriter; +typedef struct Blob Blob; +typedef struct NodeReader NodeReader; + /* -** Return the size of the common prefix (if any) shared by zPrev and -** zNext, in bytes. For example, +** An instance of the following structure is used as a dynamic buffer +** to build up nodes or other blobs of data in. ** -** fts3PrefixCompress("abc", 3, "abcdef", 6) // returns 3 -** fts3PrefixCompress("abX", 3, "abcdef", 6) // returns 2 -** fts3PrefixCompress("abX", 3, "Xbcdef", 6) // returns 0 +** The function blobGrowBuffer() is used to extend the allocation. */ -static int fts3PrefixCompress( - const char *zPrev, /* Buffer containing previous term */ - int nPrev, /* Size of buffer zPrev in bytes */ - const char *zNext, /* Buffer containing next term */ - int nNext /* Size of buffer zNext in bytes */ -){ - int n; - UNUSED_PARAMETER(nNext); - for(n=0; n=n) */ +}; /* -** Add term zTerm to the SegmentNode. It is guaranteed that zTerm is larger -** (according to memcmp) than the previous term. +** This structure is used to build up buffers containing segment b-tree +** nodes (blocks). */ -static int fts3NodeAddTerm( - Fts3Table *p, /* Virtual table handle */ - SegmentNode **ppTree, /* IN/OUT: SegmentNode handle */ - int isCopyTerm, /* True if zTerm/nTerm is transient */ - const char *zTerm, /* Pointer to buffer containing term */ - int nTerm /* Size of term in bytes */ -){ - SegmentNode *pTree = *ppTree; - int rc; - SegmentNode *pNew; +struct NodeWriter { + sqlite3_int64 iBlock; /* Current block id */ + Blob key; /* Last key written to the current block */ + Blob block; /* Current block image */ +}; - /* First try to append the term to the current node. Return early if - ** this is possible. - */ - if( pTree ){ - int nData = pTree->nData; /* Current size of node in bytes */ - int nReq = nData; /* Required space after adding zTerm */ - int nPrefix; /* Number of bytes of prefix compression */ - int nSuffix; /* Suffix length */ +/* +** An object of this type contains the state required to create or append +** to an appendable b-tree segment. +*/ +struct IncrmergeWriter { + int nLeafEst; /* Space allocated for leaf blocks */ + int nWork; /* Number of leaf pages flushed */ + sqlite3_int64 iAbsLevel; /* Absolute level of input segments */ + int iIdx; /* Index of *output* segment in iAbsLevel+1 */ + sqlite3_int64 iStart; /* Block number of first allocated block */ + sqlite3_int64 iEnd; /* Block number of last allocated block */ + sqlite3_int64 nLeafData; /* Bytes of leaf page data so far */ + u8 bNoLeafData; /* If true, store 0 for segment size */ + NodeWriter aNodeWriter[FTS_MAX_APPENDABLE_HEIGHT]; +}; - nPrefix = fts3PrefixCompress(pTree->zTerm, pTree->nTerm, zTerm, nTerm); - nSuffix = nTerm-nPrefix; +/* +** An object of the following type is used to read data from a single +** FTS segment node. See the following functions: +** +** nodeReaderInit() +** nodeReaderNext() +** nodeReaderRelease() +*/ +struct NodeReader { + const char *aNode; + int nNode; + int iOff; /* Current offset within aNode[] */ - nReq += sqlite3Fts3VarintLen(nPrefix)+sqlite3Fts3VarintLen(nSuffix)+nSuffix; - if( nReq<=p->nNodeSize || !pTree->zTerm ){ + /* Output variables. Containing the current node entry. */ + sqlite3_int64 iChild; /* Pointer to child node */ + Blob term; /* Current term */ + const char *aDoclist; /* Pointer to doclist */ + int nDoclist; /* Size of doclist in bytes */ +}; - if( nReq>p->nNodeSize ){ - /* An unusual case: this is the first term to be added to the node - ** and the static node buffer (p->nNodeSize bytes) is not large - ** enough. Use a separately malloced buffer instead This wastes - ** p->nNodeSize bytes, but since this scenario only comes about when - ** the database contain two terms that share a prefix of almost 2KB, - ** this is not expected to be a serious problem. - */ - assert( pTree->aData==(char *)&pTree[1] ); - pTree->aData = (char *)sqlite3_malloc(nReq); - if( !pTree->aData ){ - return SQLITE_NOMEM; - } - } +/* +** If *pRc is not SQLITE_OK when this function is called, it is a no-op. +** Otherwise, if the allocation at pBlob->a is not already at least nMin +** bytes in size, extend (realloc) it to be so. +** +** If an OOM error occurs, set *pRc to SQLITE_NOMEM and leave pBlob->a +** unmodified. Otherwise, if the allocation succeeds, update pBlob->nAlloc +** to reflect the new size of the pBlob->a[] buffer. +*/ +static void blobGrowBuffer(Blob *pBlob, int nMin, int *pRc){ + if( *pRc==SQLITE_OK && nMin>pBlob->nAlloc ){ + int nAlloc = nMin; + char *a = (char *)sqlite3_realloc(pBlob->a, nAlloc); + if( a ){ + pBlob->nAlloc = nAlloc; + pBlob->a = a; + }else{ + *pRc = SQLITE_NOMEM; + } + } +} - if( pTree->zTerm ){ - /* There is no prefix-length field for first term in a node */ - nData += sqlite3Fts3PutVarint(&pTree->aData[nData], nPrefix); - } +/* +** Attempt to advance the node-reader object passed as the first argument to +** the next entry on the node. +** +** Return an error code if an error occurs (SQLITE_NOMEM is possible). +** Otherwise return SQLITE_OK. If there is no next entry on the node +** (e.g. because the current entry is the last) set NodeReader->aNode to +** NULL to indicate EOF. Otherwise, populate the NodeReader structure output +** variables for the new entry. +*/ +static int nodeReaderNext(NodeReader *p){ + int bFirst = (p->term.n==0); /* True for first term on the node */ + int nPrefix = 0; /* Bytes to copy from previous term */ + int nSuffix = 0; /* Bytes to append to the prefix */ + int rc = SQLITE_OK; /* Return code */ - nData += sqlite3Fts3PutVarint(&pTree->aData[nData], nSuffix); - memcpy(&pTree->aData[nData], &zTerm[nPrefix], nSuffix); - pTree->nData = nData + nSuffix; - pTree->nEntry++; + assert( p->aNode ); + if( p->iChild && bFirst==0 ) p->iChild++; + if( p->iOff>=p->nNode ){ + /* EOF */ + p->aNode = 0; + }else{ + if( bFirst==0 ){ + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nPrefix); + } + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nSuffix); - if( isCopyTerm ){ - if( pTree->nMalloczMalloc, nTerm*2); - if( !zNew ){ - return SQLITE_NOMEM; - } - pTree->nMalloc = nTerm*2; - pTree->zMalloc = zNew; - } - pTree->zTerm = pTree->zMalloc; - memcpy(pTree->zTerm, zTerm, nTerm); - pTree->nTerm = nTerm; - }else{ - pTree->zTerm = (char *)zTerm; - pTree->nTerm = nTerm; + blobGrowBuffer(&p->term, nPrefix+nSuffix, &rc); + if( rc==SQLITE_OK ){ + memcpy(&p->term.a[nPrefix], &p->aNode[p->iOff], nSuffix); + p->term.n = nPrefix+nSuffix; + p->iOff += nSuffix; + if( p->iChild==0 ){ + p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &p->nDoclist); + p->aDoclist = &p->aNode[p->iOff]; + p->iOff += p->nDoclist; } - return SQLITE_OK; } } - /* If control flows to here, it was not possible to append zTerm to the - ** current node. Create a new node (a right-sibling of the current node). - ** If this is the first node in the tree, the term is added to it. - ** - ** Otherwise, the term is not added to the new node, it is left empty for - ** now. Instead, the term is inserted into the parent of pTree. If pTree - ** has no parent, one is created here. - */ - pNew = (SegmentNode *)sqlite3_malloc(sizeof(SegmentNode) + p->nNodeSize); - if( !pNew ){ - return SQLITE_NOMEM; - } - memset(pNew, 0, sizeof(SegmentNode)); - pNew->nData = 1 + FTS3_VARINT_MAX; - pNew->aData = (char *)&pNew[1]; - - if( pTree ){ - SegmentNode *pParent = pTree->pParent; - rc = fts3NodeAddTerm(p, &pParent, isCopyTerm, zTerm, nTerm); - if( pTree->pParent==0 ){ - pTree->pParent = pParent; - } - pTree->pRight = pNew; - pNew->pLeftmost = pTree->pLeftmost; - pNew->pParent = pParent; - pNew->zMalloc = pTree->zMalloc; - pNew->nMalloc = pTree->nMalloc; - pTree->zMalloc = 0; - }else{ - pNew->pLeftmost = pNew; - rc = fts3NodeAddTerm(p, &pNew, isCopyTerm, zTerm, nTerm); - } + assert( p->iOff<=p->nNode ); - *ppTree = pNew; return rc; } /* -** Helper function for fts3NodeWrite(). +** Release all dynamic resources held by node-reader object *p. */ -static int fts3TreeFinishNode( - SegmentNode *pTree, - int iHeight, - sqlite3_int64 iLeftChild -){ - int nStart; - assert( iHeight>=1 && iHeight<128 ); - nStart = FTS3_VARINT_MAX - sqlite3Fts3VarintLen(iLeftChild); - pTree->aData[nStart] = (char)iHeight; - sqlite3Fts3PutVarint(&pTree->aData[nStart+1], iLeftChild); - return nStart; +static void nodeReaderRelease(NodeReader *p){ + sqlite3_free(p->term.a); } /* -** Write the buffer for the segment node pTree and all of its peers to the -** database. Then call this function recursively to write the parent of -** pTree and its peers to the database. -** -** Except, if pTree is a root node, do not write it to the database. Instead, -** set output variables *paRoot and *pnRoot to contain the root node. +** Initialize a node-reader object to read the node in buffer aNode/nNode. ** -** If successful, SQLITE_OK is returned and output variable *piLast is -** set to the largest blockid written to the database (or zero if no -** blocks were written to the db). Otherwise, an SQLite error code is -** returned. +** If successful, SQLITE_OK is returned and the NodeReader object set to +** point to the first entry on the node (if any). Otherwise, an SQLite +** error code is returned. */ -static int fts3NodeWrite( - Fts3Table *p, /* Virtual table handle */ - SegmentNode *pTree, /* SegmentNode handle */ - int iHeight, /* Height of this node in tree */ - sqlite3_int64 iLeaf, /* Block id of first leaf node */ - sqlite3_int64 iFree, /* Block id of next free slot in %_segments */ - sqlite3_int64 *piLast, /* OUT: Block id of last entry written */ - char **paRoot, /* OUT: Data for root node */ - int *pnRoot /* OUT: Size of root node in bytes */ -){ - int rc = SQLITE_OK; +static int nodeReaderInit(NodeReader *p, const char *aNode, int nNode){ + memset(p, 0, sizeof(NodeReader)); + p->aNode = aNode; + p->nNode = nNode; - if( !pTree->pParent ){ - /* Root node of the tree. */ - int nStart = fts3TreeFinishNode(pTree, iHeight, iLeaf); - *piLast = iFree-1; - *pnRoot = pTree->nData - nStart; - *paRoot = &pTree->aData[nStart]; + /* Figure out if this is a leaf or an internal node. */ + if( p->aNode[0] ){ + /* An internal node. */ + p->iOff = 1 + sqlite3Fts3GetVarint(&p->aNode[1], &p->iChild); }else{ - SegmentNode *pIter; - sqlite3_int64 iNextFree = iFree; - sqlite3_int64 iNextLeaf = iLeaf; - for(pIter=pTree->pLeftmost; pIter && rc==SQLITE_OK; pIter=pIter->pRight){ - int nStart = fts3TreeFinishNode(pIter, iHeight, iNextLeaf); - int nWrite = pIter->nData - nStart; - - rc = fts3WriteSegment(p, iNextFree, &pIter->aData[nStart], nWrite); - iNextFree++; - iNextLeaf += (pIter->nEntry+1); - } - if( rc==SQLITE_OK ){ - assert( iNextLeaf==iFree ); - rc = fts3NodeWrite( - p, pTree->pParent, iHeight+1, iFree, iNextFree, piLast, paRoot, pnRoot - ); - } + p->iOff = 1; } - return rc; + return nodeReaderNext(p); } /* -** Free all memory allocations associated with the tree pTree. +** This function is called while writing an FTS segment each time a leaf o +** node is finished and written to disk. The key (zTerm/nTerm) is guaranteed +** to be greater than the largest key on the node just written, but smaller +** than or equal to the first key that will be written to the next leaf +** node. +** +** The block id of the leaf node just written to disk may be found in +** (pWriter->aNodeWriter[0].iBlock) when this function is called. */ -static void fts3NodeFree(SegmentNode *pTree){ - if( pTree ){ - SegmentNode *p = pTree->pLeftmost; - fts3NodeFree(p->pParent); - while( p ){ - SegmentNode *pRight = p->pRight; - if( p->aData!=(char *)&p[1] ){ - sqlite3_free(p->aData); +static int fts3IncrmergePush( + Fts3Table *p, /* Fts3 table handle */ + IncrmergeWriter *pWriter, /* Writer object */ + const char *zTerm, /* Term to write to internal node */ + int nTerm /* Bytes at zTerm */ +){ + sqlite3_int64 iPtr = pWriter->aNodeWriter[0].iBlock; + int iLayer; + + assert( nTerm>0 ); + for(iLayer=1; ALWAYS(iLayeraNodeWriter[iLayer]; + int rc = SQLITE_OK; + int nPrefix; + int nSuffix; + int nSpace; + + /* Figure out how much space the key will consume if it is written to + ** the current node of layer iLayer. Due to the prefix compression, + ** the space required changes depending on which node the key is to + ** be added to. */ + nPrefix = fts3PrefixCompress(pNode->key.a, pNode->key.n, zTerm, nTerm); + nSuffix = nTerm - nPrefix; + nSpace = sqlite3Fts3VarintLen(nPrefix); + nSpace += sqlite3Fts3VarintLen(nSuffix) + nSuffix; + + if( pNode->key.n==0 || (pNode->block.n + nSpace)<=p->nNodeSize ){ + /* If the current node of layer iLayer contains zero keys, or if adding + ** the key to it will not cause it to grow to larger than nNodeSize + ** bytes in size, write the key here. */ + + Blob *pBlk = &pNode->block; + if( pBlk->n==0 ){ + blobGrowBuffer(pBlk, p->nNodeSize, &rc); + if( rc==SQLITE_OK ){ + pBlk->a[0] = (char)iLayer; + pBlk->n = 1 + sqlite3Fts3PutVarint(&pBlk->a[1], iPtr); + } } - assert( pRight==0 || p->zMalloc==0 ); - sqlite3_free(p->zMalloc); - sqlite3_free(p); - p = pRight; + blobGrowBuffer(pBlk, pBlk->n + nSpace, &rc); + blobGrowBuffer(&pNode->key, nTerm, &rc); + + if( rc==SQLITE_OK ){ + if( pNode->key.n ){ + pBlk->n += sqlite3Fts3PutVarint(&pBlk->a[pBlk->n], nPrefix); + } + pBlk->n += sqlite3Fts3PutVarint(&pBlk->a[pBlk->n], nSuffix); + memcpy(&pBlk->a[pBlk->n], &zTerm[nPrefix], nSuffix); + pBlk->n += nSuffix; + + memcpy(pNode->key.a, zTerm, nTerm); + pNode->key.n = nTerm; + } + }else{ + /* Otherwise, flush the current node of layer iLayer to disk. + ** Then allocate a new, empty sibling node. The key will be written + ** into the parent of this node. */ + rc = fts3WriteSegment(p, pNode->iBlock, pNode->block.a, pNode->block.n); + + assert( pNode->block.nAlloc>=p->nNodeSize ); + pNode->block.a[0] = (char)iLayer; + pNode->block.n = 1 + sqlite3Fts3PutVarint(&pNode->block.a[1], iPtr+1); + + iNextPtr = pNode->iBlock; + pNode->iBlock++; + pNode->key.n = 0; } + + if( rc!=SQLITE_OK || iNextPtr==0 ) return rc; + iPtr = iNextPtr; } + + assert( 0 ); + return 0; } /* -** Add a term to the segment being constructed by the SegmentWriter object -** *ppWriter. When adding the first term to a segment, *ppWriter should -** be passed NULL. This function will allocate a new SegmentWriter object -** and return it via the input/output variable *ppWriter in this case. +** Append a term and (optionally) doclist to the FTS segment node currently +** stored in blob *pNode. The node need not contain any terms, but the +** header must be written before this function is called. ** -** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code. +** A node header is a single 0x00 byte for a leaf node, or a height varint +** followed by the left-hand-child varint for an internal node. +** +** The term to be appended is passed via arguments zTerm/nTerm. For a +** leaf node, the doclist is passed as aDoclist/nDoclist. For an internal +** node, both aDoclist and nDoclist must be passed 0. +** +** If the size of the value in blob pPrev is zero, then this is the first +** term written to the node. Otherwise, pPrev contains a copy of the +** previous term. Before this function returns, it is updated to contain a +** copy of zTerm/nTerm. +** +** It is assumed that the buffer associated with pNode is already large +** enough to accommodate the new entry. The buffer associated with pPrev +** is extended by this function if requrired. +** +** If an error (i.e. OOM condition) occurs, an SQLite error code is +** returned. Otherwise, SQLITE_OK. */ -static int fts3SegWriterAdd( - Fts3Table *p, /* Virtual table handle */ - SegmentWriter **ppWriter, /* IN/OUT: SegmentWriter handle */ - int isCopyTerm, /* True if buffer zTerm must be copied */ - const char *zTerm, /* Pointer to buffer containing term */ - int nTerm, /* Size of term in bytes */ - const char *aDoclist, /* Pointer to buffer containing doclist */ - int nDoclist /* Size of doclist in bytes */ +static int fts3AppendToNode( + Blob *pNode, /* Current node image to append to */ + Blob *pPrev, /* Buffer containing previous term written */ + const char *zTerm, /* New term to write */ + int nTerm, /* Size of zTerm in bytes */ + const char *aDoclist, /* Doclist (or NULL) to write */ + int nDoclist /* Size of aDoclist in bytes */ ){ + int rc = SQLITE_OK; /* Return code */ + int bFirst = (pPrev->n==0); /* True if this is the first term written */ int nPrefix; /* Size of term prefix in bytes */ int nSuffix; /* Size of term suffix in bytes */ - int nReq; /* Number of bytes required on leaf page */ - int nData; - SegmentWriter *pWriter = *ppWriter; - if( !pWriter ){ - int rc; - sqlite3_stmt *pStmt; + /* Node must have already been started. There must be a doclist for a + ** leaf node, and there must not be a doclist for an internal node. */ + assert( pNode->n>0 ); + assert( (pNode->a[0]=='\0')==(aDoclist!=0) ); - /* Allocate the SegmentWriter structure */ - pWriter = (SegmentWriter *)sqlite3_malloc(sizeof(SegmentWriter)); - if( !pWriter ) return SQLITE_NOMEM; - memset(pWriter, 0, sizeof(SegmentWriter)); - *ppWriter = pWriter; + blobGrowBuffer(pPrev, nTerm, &rc); + if( rc!=SQLITE_OK ) return rc; - /* Allocate a buffer in which to accumulate data */ - pWriter->aData = (char *)sqlite3_malloc(p->nNodeSize); - if( !pWriter->aData ) return SQLITE_NOMEM; - pWriter->nSize = p->nNodeSize; + nPrefix = fts3PrefixCompress(pPrev->a, pPrev->n, zTerm, nTerm); + nSuffix = nTerm - nPrefix; + memcpy(pPrev->a, zTerm, nTerm); + pPrev->n = nTerm; - /* Find the next free blockid in the %_segments table */ - rc = fts3SqlStmt(p, SQL_NEXT_SEGMENTS_ID, &pStmt, 0); - if( rc!=SQLITE_OK ) return rc; - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - pWriter->iFree = sqlite3_column_int64(pStmt, 0); - pWriter->iFirst = pWriter->iFree; - } - rc = sqlite3_reset(pStmt); - if( rc!=SQLITE_OK ) return rc; + if( bFirst==0 ){ + pNode->n += sqlite3Fts3PutVarint(&pNode->a[pNode->n], nPrefix); } - nData = pWriter->nData; - - nPrefix = fts3PrefixCompress(pWriter->zTerm, pWriter->nTerm, zTerm, nTerm); - nSuffix = nTerm-nPrefix; - - /* Figure out how many bytes are required by this new entry */ - nReq = sqlite3Fts3VarintLen(nPrefix) + /* varint containing prefix size */ - sqlite3Fts3VarintLen(nSuffix) + /* varint containing suffix size */ - nSuffix + /* Term suffix */ - sqlite3Fts3VarintLen(nDoclist) + /* Size of doclist */ - nDoclist; /* Doclist data */ + pNode->n += sqlite3Fts3PutVarint(&pNode->a[pNode->n], nSuffix); + memcpy(&pNode->a[pNode->n], &zTerm[nPrefix], nSuffix); + pNode->n += nSuffix; - if( nData>0 && nData+nReq>p->nNodeSize ){ - int rc; + if( aDoclist ){ + pNode->n += sqlite3Fts3PutVarint(&pNode->a[pNode->n], nDoclist); + memcpy(&pNode->a[pNode->n], aDoclist, nDoclist); + pNode->n += nDoclist; + } - /* The current leaf node is full. Write it out to the database. */ - rc = fts3WriteSegment(p, pWriter->iFree++, pWriter->aData, nData); - if( rc!=SQLITE_OK ) return rc; + assert( pNode->n<=pNode->nAlloc ); - /* Add the current term to the interior node tree. The term added to - ** the interior tree must: + return SQLITE_OK; +} + +/* +** Append the current term and doclist pointed to by cursor pCsr to the +** appendable b-tree segment opened for writing by pWriter. +** +** Return SQLITE_OK if successful, or an SQLite error code otherwise. +*/ +static int fts3IncrmergeAppend( + Fts3Table *p, /* Fts3 table handle */ + IncrmergeWriter *pWriter, /* Writer object */ + Fts3MultiSegReader *pCsr /* Cursor containing term and doclist */ +){ + const char *zTerm = pCsr->zTerm; + int nTerm = pCsr->nTerm; + const char *aDoclist = pCsr->aDoclist; + int nDoclist = pCsr->nDoclist; + int rc = SQLITE_OK; /* Return code */ + int nSpace; /* Total space in bytes required on leaf */ + int nPrefix; /* Size of prefix shared with previous term */ + int nSuffix; /* Size of suffix (nTerm - nPrefix) */ + NodeWriter *pLeaf; /* Object used to write leaf nodes */ + + pLeaf = &pWriter->aNodeWriter[0]; + nPrefix = fts3PrefixCompress(pLeaf->key.a, pLeaf->key.n, zTerm, nTerm); + nSuffix = nTerm - nPrefix; + + nSpace = sqlite3Fts3VarintLen(nPrefix); + nSpace += sqlite3Fts3VarintLen(nSuffix) + nSuffix; + nSpace += sqlite3Fts3VarintLen(nDoclist) + nDoclist; + + /* If the current block is not empty, and if adding this term/doclist + ** to the current block would make it larger than Fts3Table.nNodeSize + ** bytes, write this block out to the database. */ + if( pLeaf->block.n>0 && (pLeaf->block.n + nSpace)>p->nNodeSize ){ + rc = fts3WriteSegment(p, pLeaf->iBlock, pLeaf->block.a, pLeaf->block.n); + pWriter->nWork++; + + /* Add the current term to the parent node. The term added to the + ** parent must: ** ** a) be greater than the largest term on the leaf node just written - ** to the database (still available in pWriter->zTerm), and + ** to the database (still available in pLeaf->key), and ** ** b) be less than or equal to the term about to be added to the new ** leaf node (zTerm/nTerm). @@ -121613,223 +143483,450 @@ static int fts3SegWriterAdd( ** In other words, it must be the prefix of zTerm 1 byte longer than ** the common prefix (if any) of zTerm and pWriter->zTerm. */ - assert( nPrefixpTree, isCopyTerm, zTerm, nPrefix+1); - if( rc!=SQLITE_OK ) return rc; + if( rc==SQLITE_OK ){ + rc = fts3IncrmergePush(p, pWriter, zTerm, nPrefix+1); + } - nData = 0; - pWriter->nTerm = 0; + /* Advance to the next output block */ + pLeaf->iBlock++; + pLeaf->key.n = 0; + pLeaf->block.n = 0; - nPrefix = 0; nSuffix = nTerm; - nReq = 1 + /* varint containing prefix size */ - sqlite3Fts3VarintLen(nTerm) + /* varint containing suffix size */ - nTerm + /* Term suffix */ - sqlite3Fts3VarintLen(nDoclist) + /* Size of doclist */ - nDoclist; /* Doclist data */ + nSpace = 1; + nSpace += sqlite3Fts3VarintLen(nSuffix) + nSuffix; + nSpace += sqlite3Fts3VarintLen(nDoclist) + nDoclist; } - /* If the buffer currently allocated is too small for this entry, realloc - ** the buffer to make it large enough. - */ - if( nReq>pWriter->nSize ){ - char *aNew = sqlite3_realloc(pWriter->aData, nReq); - if( !aNew ) return SQLITE_NOMEM; - pWriter->aData = aNew; - pWriter->nSize = nReq; + pWriter->nLeafData += nSpace; + blobGrowBuffer(&pLeaf->block, pLeaf->block.n + nSpace, &rc); + if( rc==SQLITE_OK ){ + if( pLeaf->block.n==0 ){ + pLeaf->block.n = 1; + pLeaf->block.a[0] = '\0'; + } + rc = fts3AppendToNode( + &pLeaf->block, &pLeaf->key, zTerm, nTerm, aDoclist, nDoclist + ); } - assert( nData+nReq<=pWriter->nSize ); - /* Append the prefix-compressed term and doclist to the buffer. */ - nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nPrefix); - nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nSuffix); - memcpy(&pWriter->aData[nData], &zTerm[nPrefix], nSuffix); - nData += nSuffix; - nData += sqlite3Fts3PutVarint(&pWriter->aData[nData], nDoclist); - memcpy(&pWriter->aData[nData], aDoclist, nDoclist); - pWriter->nData = nData + nDoclist; + return rc; +} - /* Save the current term so that it can be used to prefix-compress the next. - ** If the isCopyTerm parameter is true, then the buffer pointed to by - ** zTerm is transient, so take a copy of the term data. Otherwise, just - ** store a copy of the pointer. +/* +** This function is called to release all dynamic resources held by the +** merge-writer object pWriter, and if no error has occurred, to flush +** all outstanding node buffers held by pWriter to disk. +** +** If *pRc is not SQLITE_OK when this function is called, then no attempt +** is made to write any data to disk. Instead, this function serves only +** to release outstanding resources. +** +** Otherwise, if *pRc is initially SQLITE_OK and an error occurs while +** flushing buffers to disk, *pRc is set to an SQLite error code before +** returning. +*/ +static void fts3IncrmergeRelease( + Fts3Table *p, /* FTS3 table handle */ + IncrmergeWriter *pWriter, /* Merge-writer object */ + int *pRc /* IN/OUT: Error code */ +){ + int i; /* Used to iterate through non-root layers */ + int iRoot; /* Index of root in pWriter->aNodeWriter */ + NodeWriter *pRoot; /* NodeWriter for root node */ + int rc = *pRc; /* Error code */ + + /* Set iRoot to the index in pWriter->aNodeWriter[] of the output segment + ** root node. If the segment fits entirely on a single leaf node, iRoot + ** will be set to 0. If the root node is the parent of the leaves, iRoot + ** will be 1. And so on. */ + for(iRoot=FTS_MAX_APPENDABLE_HEIGHT-1; iRoot>=0; iRoot--){ + NodeWriter *pNode = &pWriter->aNodeWriter[iRoot]; + if( pNode->block.n>0 ) break; + assert( *pRc || pNode->block.nAlloc==0 ); + assert( *pRc || pNode->key.nAlloc==0 ); + sqlite3_free(pNode->block.a); + sqlite3_free(pNode->key.a); + } + + /* Empty output segment. This is a no-op. */ + if( iRoot<0 ) return; + + /* The entire output segment fits on a single node. Normally, this means + ** the node would be stored as a blob in the "root" column of the %_segdir + ** table. However, this is not permitted in this case. The problem is that + ** space has already been reserved in the %_segments table, and so the + ** start_block and end_block fields of the %_segdir table must be populated. + ** And, by design or by accident, released versions of FTS cannot handle + ** segments that fit entirely on the root node with start_block!=0. + ** + ** Instead, create a synthetic root node that contains nothing but a + ** pointer to the single content node. So that the segment consists of a + ** single leaf and a single interior (root) node. + ** + ** Todo: Better might be to defer allocating space in the %_segments + ** table until we are sure it is needed. */ - if( isCopyTerm ){ - if( nTerm>pWriter->nMalloc ){ - char *zNew = sqlite3_realloc(pWriter->zMalloc, nTerm*2); - if( !zNew ){ - return SQLITE_NOMEM; - } - pWriter->nMalloc = nTerm*2; - pWriter->zMalloc = zNew; - pWriter->zTerm = zNew; + if( iRoot==0 ){ + Blob *pBlock = &pWriter->aNodeWriter[1].block; + blobGrowBuffer(pBlock, 1 + FTS3_VARINT_MAX, &rc); + if( rc==SQLITE_OK ){ + pBlock->a[0] = 0x01; + pBlock->n = 1 + sqlite3Fts3PutVarint( + &pBlock->a[1], pWriter->aNodeWriter[0].iBlock + ); } - assert( pWriter->zTerm==pWriter->zMalloc ); - memcpy(pWriter->zTerm, zTerm, nTerm); - }else{ - pWriter->zTerm = (char *)zTerm; + iRoot = 1; } - pWriter->nTerm = nTerm; + pRoot = &pWriter->aNodeWriter[iRoot]; - return SQLITE_OK; + /* Flush all currently outstanding nodes to disk. */ + for(i=0; iaNodeWriter[i]; + if( pNode->block.n>0 && rc==SQLITE_OK ){ + rc = fts3WriteSegment(p, pNode->iBlock, pNode->block.a, pNode->block.n); + } + sqlite3_free(pNode->block.a); + sqlite3_free(pNode->key.a); + } + + /* Write the %_segdir record. */ + if( rc==SQLITE_OK ){ + rc = fts3WriteSegdir(p, + pWriter->iAbsLevel+1, /* level */ + pWriter->iIdx, /* idx */ + pWriter->iStart, /* start_block */ + pWriter->aNodeWriter[0].iBlock, /* leaves_end_block */ + pWriter->iEnd, /* end_block */ + (pWriter->bNoLeafData==0 ? pWriter->nLeafData : 0), /* end_block */ + pRoot->block.a, pRoot->block.n /* root */ + ); + } + sqlite3_free(pRoot->block.a); + sqlite3_free(pRoot->key.a); + + *pRc = rc; } /* -** Flush all data associated with the SegmentWriter object pWriter to the -** database. This function must be called after all terms have been added -** to the segment using fts3SegWriterAdd(). If successful, SQLITE_OK is -** returned. Otherwise, an SQLite error code. +** Compare the term in buffer zLhs (size in bytes nLhs) with that in +** zRhs (size in bytes nRhs) using memcmp. If one term is a prefix of +** the other, it is considered to be smaller than the other. +** +** Return -ve if zLhs is smaller than zRhs, 0 if it is equal, or +ve +** if it is greater. */ -static int fts3SegWriterFlush( - Fts3Table *p, /* Virtual table handle */ - SegmentWriter *pWriter, /* SegmentWriter to flush to the db */ - int iLevel, /* Value for 'level' column of %_segdir */ - int iIdx /* Value for 'idx' column of %_segdir */ +static int fts3TermCmp( + const char *zLhs, int nLhs, /* LHS of comparison */ + const char *zRhs, int nRhs /* RHS of comparison */ ){ - int rc; /* Return code */ - if( pWriter->pTree ){ - sqlite3_int64 iLast = 0; /* Largest block id written to database */ - sqlite3_int64 iLastLeaf; /* Largest leaf block id written to db */ - char *zRoot = NULL; /* Pointer to buffer containing root node */ - int nRoot = 0; /* Size of buffer zRoot */ + int nCmp = MIN(nLhs, nRhs); + int res; - iLastLeaf = pWriter->iFree; - rc = fts3WriteSegment(p, pWriter->iFree++, pWriter->aData, pWriter->nData); - if( rc==SQLITE_OK ){ - rc = fts3NodeWrite(p, pWriter->pTree, 1, - pWriter->iFirst, pWriter->iFree, &iLast, &zRoot, &nRoot); - } - if( rc==SQLITE_OK ){ - rc = fts3WriteSegdir( - p, iLevel, iIdx, pWriter->iFirst, iLastLeaf, iLast, zRoot, nRoot); - } - }else{ - /* The entire tree fits on the root node. Write it to the segdir table. */ - rc = fts3WriteSegdir( - p, iLevel, iIdx, 0, 0, 0, pWriter->aData, pWriter->nData); - } - return rc; + res = memcmp(zLhs, zRhs, nCmp); + if( res==0 ) res = nLhs - nRhs; + + return res; } + /* -** Release all memory held by the SegmentWriter object passed as the -** first argument. +** Query to see if the entry in the %_segments table with blockid iEnd is +** NULL. If no error occurs and the entry is NULL, set *pbRes 1 before +** returning. Otherwise, set *pbRes to 0. +** +** Or, if an error occurs while querying the database, return an SQLite +** error code. The final value of *pbRes is undefined in this case. +** +** This is used to test if a segment is an "appendable" segment. If it +** is, then a NULL entry has been inserted into the %_segments table +** with blockid %_segdir.end_block. */ -static void fts3SegWriterFree(SegmentWriter *pWriter){ - if( pWriter ){ - sqlite3_free(pWriter->aData); - sqlite3_free(pWriter->zMalloc); - fts3NodeFree(pWriter->pTree); - sqlite3_free(pWriter); +static int fts3IsAppendable(Fts3Table *p, sqlite3_int64 iEnd, int *pbRes){ + int bRes = 0; /* Result to set *pbRes to */ + sqlite3_stmt *pCheck = 0; /* Statement to query database with */ + int rc; /* Return code */ + + rc = fts3SqlStmt(p, SQL_SEGMENT_IS_APPENDABLE, &pCheck, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pCheck, 1, iEnd); + if( SQLITE_ROW==sqlite3_step(pCheck) ) bRes = 1; + rc = sqlite3_reset(pCheck); } + + *pbRes = bRes; + return rc; } /* -** The first value in the apVal[] array is assumed to contain an integer. -** This function tests if there exist any documents with docid values that -** are different from that integer. i.e. if deleting the document with docid -** pRowid would mean the FTS3 table were empty. +** This function is called when initializing an incremental-merge operation. +** It checks if the existing segment with index value iIdx at absolute level +** (iAbsLevel+1) can be appended to by the incremental merge. If it can, the +** merge-writer object *pWriter is initialized to write to it. ** -** If successful, *pisEmpty is set to true if the table is empty except for -** document pRowid, or false otherwise, and SQLITE_OK is returned. If an -** error occurs, an SQLite error code is returned. +** An existing segment can be appended to by an incremental merge if: +** +** * It was initially created as an appendable segment (with all required +** space pre-allocated), and +** +** * The first key read from the input (arguments zKey and nKey) is +** greater than the largest key currently stored in the potential +** output segment. */ -static int fts3IsEmpty(Fts3Table *p, sqlite3_value *pRowid, int *pisEmpty){ - sqlite3_stmt *pStmt; - int rc; - rc = fts3SqlStmt(p, SQL_IS_EMPTY, &pStmt, &pRowid); +static int fts3IncrmergeLoad( + Fts3Table *p, /* Fts3 table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level of input segments */ + int iIdx, /* Index of candidate output segment */ + const char *zKey, /* First key to write */ + int nKey, /* Number of bytes in nKey */ + IncrmergeWriter *pWriter /* Populate this object */ +){ + int rc; /* Return code */ + sqlite3_stmt *pSelect = 0; /* SELECT to read %_segdir entry */ + + rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR, &pSelect, 0); if( rc==SQLITE_OK ){ - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - *pisEmpty = sqlite3_column_int(pStmt, 0); + sqlite3_int64 iStart = 0; /* Value of %_segdir.start_block */ + sqlite3_int64 iLeafEnd = 0; /* Value of %_segdir.leaves_end_block */ + sqlite3_int64 iEnd = 0; /* Value of %_segdir.end_block */ + const char *aRoot = 0; /* Pointer to %_segdir.root buffer */ + int nRoot = 0; /* Size of aRoot[] in bytes */ + int rc2; /* Return code from sqlite3_reset() */ + int bAppendable = 0; /* Set to true if segment is appendable */ + + /* Read the %_segdir entry for index iIdx absolute level (iAbsLevel+1) */ + sqlite3_bind_int64(pSelect, 1, iAbsLevel+1); + sqlite3_bind_int(pSelect, 2, iIdx); + if( sqlite3_step(pSelect)==SQLITE_ROW ){ + iStart = sqlite3_column_int64(pSelect, 1); + iLeafEnd = sqlite3_column_int64(pSelect, 2); + fts3ReadEndBlockField(pSelect, 3, &iEnd, &pWriter->nLeafData); + if( pWriter->nLeafData<0 ){ + pWriter->nLeafData = pWriter->nLeafData * -1; + } + pWriter->bNoLeafData = (pWriter->nLeafData==0); + nRoot = sqlite3_column_bytes(pSelect, 4); + aRoot = sqlite3_column_blob(pSelect, 4); + }else{ + return sqlite3_reset(pSelect); } - rc = sqlite3_reset(pStmt); + + /* Check for the zero-length marker in the %_segments table */ + rc = fts3IsAppendable(p, iEnd, &bAppendable); + + /* Check that zKey/nKey is larger than the largest key the candidate */ + if( rc==SQLITE_OK && bAppendable ){ + char *aLeaf = 0; + int nLeaf = 0; + + rc = sqlite3Fts3ReadBlock(p, iLeafEnd, &aLeaf, &nLeaf, 0); + if( rc==SQLITE_OK ){ + NodeReader reader; + for(rc = nodeReaderInit(&reader, aLeaf, nLeaf); + rc==SQLITE_OK && reader.aNode; + rc = nodeReaderNext(&reader) + ){ + assert( reader.aNode ); + } + if( fts3TermCmp(zKey, nKey, reader.term.a, reader.term.n)<=0 ){ + bAppendable = 0; + } + nodeReaderRelease(&reader); + } + sqlite3_free(aLeaf); + } + + if( rc==SQLITE_OK && bAppendable ){ + /* It is possible to append to this segment. Set up the IncrmergeWriter + ** object to do so. */ + int i; + int nHeight = (int)aRoot[0]; + NodeWriter *pNode; + + pWriter->nLeafEst = (int)((iEnd - iStart) + 1)/FTS_MAX_APPENDABLE_HEIGHT; + pWriter->iStart = iStart; + pWriter->iEnd = iEnd; + pWriter->iAbsLevel = iAbsLevel; + pWriter->iIdx = iIdx; + + for(i=nHeight+1; iaNodeWriter[i].iBlock = pWriter->iStart + i*pWriter->nLeafEst; + } + + pNode = &pWriter->aNodeWriter[nHeight]; + pNode->iBlock = pWriter->iStart + pWriter->nLeafEst*nHeight; + blobGrowBuffer(&pNode->block, MAX(nRoot, p->nNodeSize), &rc); + if( rc==SQLITE_OK ){ + memcpy(pNode->block.a, aRoot, nRoot); + pNode->block.n = nRoot; + } + + for(i=nHeight; i>=0 && rc==SQLITE_OK; i--){ + NodeReader reader; + pNode = &pWriter->aNodeWriter[i]; + + rc = nodeReaderInit(&reader, pNode->block.a, pNode->block.n); + while( reader.aNode && rc==SQLITE_OK ) rc = nodeReaderNext(&reader); + blobGrowBuffer(&pNode->key, reader.term.n, &rc); + if( rc==SQLITE_OK ){ + memcpy(pNode->key.a, reader.term.a, reader.term.n); + pNode->key.n = reader.term.n; + if( i>0 ){ + char *aBlock = 0; + int nBlock = 0; + pNode = &pWriter->aNodeWriter[i-1]; + pNode->iBlock = reader.iChild; + rc = sqlite3Fts3ReadBlock(p, reader.iChild, &aBlock, &nBlock, 0); + blobGrowBuffer(&pNode->block, MAX(nBlock, p->nNodeSize), &rc); + if( rc==SQLITE_OK ){ + memcpy(pNode->block.a, aBlock, nBlock); + pNode->block.n = nBlock; + } + sqlite3_free(aBlock); + } + } + nodeReaderRelease(&reader); + } + } + + rc2 = sqlite3_reset(pSelect); + if( rc==SQLITE_OK ) rc = rc2; } + return rc; } /* -** Set *pnMax to the largest segment level in the database for the index -** iIndex. +** Determine the largest segment index value that exists within absolute +** level iAbsLevel+1. If no error occurs, set *piIdx to this value plus +** one before returning SQLITE_OK. Or, if there are no segments at all +** within level iAbsLevel, set *piIdx to zero. ** -** Segment levels are stored in the 'level' column of the %_segdir table. -** -** Return SQLITE_OK if successful, or an SQLite error code if not. +** If an error occurs, return an SQLite error code. The final value of +** *piIdx is undefined in this case. */ -static int fts3SegmentMaxLevel(Fts3Table *p, int iIndex, int *pnMax){ - sqlite3_stmt *pStmt; +static int fts3IncrmergeOutputIdx( + Fts3Table *p, /* FTS Table handle */ + sqlite3_int64 iAbsLevel, /* Absolute index of input segments */ + int *piIdx /* OUT: Next free index at iAbsLevel+1 */ +){ int rc; - assert( iIndex>=0 && iIndexnIndex ); + sqlite3_stmt *pOutputIdx = 0; /* SQL used to find output index */ - /* Set pStmt to the compiled version of: - ** - ** SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? - ** - ** (1024 is actually the value of macro FTS3_SEGDIR_PREFIXLEVEL_STR). - */ - rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR_MAX_LEVEL, &pStmt, 0); - if( rc!=SQLITE_OK ) return rc; - sqlite3_bind_int(pStmt, 1, iIndex*FTS3_SEGDIR_MAXLEVEL); - sqlite3_bind_int(pStmt, 2, (iIndex+1)*FTS3_SEGDIR_MAXLEVEL - 1); - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - *pnMax = sqlite3_column_int(pStmt, 0); + rc = fts3SqlStmt(p, SQL_NEXT_SEGMENT_INDEX, &pOutputIdx, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pOutputIdx, 1, iAbsLevel+1); + sqlite3_step(pOutputIdx); + *piIdx = sqlite3_column_int(pOutputIdx, 0); + rc = sqlite3_reset(pOutputIdx); } - return sqlite3_reset(pStmt); + + return rc; } -/* -** This function is used after merging multiple segments into a single large -** segment to delete the old, now redundant, segment b-trees. Specifically, -** it: -** -** 1) Deletes all %_segments entries for the segments associated with -** each of the SegReader objects in the array passed as the third -** argument, and -** -** 2) deletes all %_segdir entries with level iLevel, or all %_segdir -** entries regardless of level if (iLevel<0). -** -** SQLITE_OK is returned if successful, otherwise an SQLite error code. -*/ -static int fts3DeleteSegdir( - Fts3Table *p, /* Virtual table handle */ - int iIndex, /* Index for p->aIndex */ - int iLevel, /* Level of %_segdir entries to delete */ - Fts3SegReader **apSegment, /* Array of SegReader objects */ - int nReader /* Size of array apSegment */ +/* +** Allocate an appendable output segment on absolute level iAbsLevel+1 +** with idx value iIdx. +** +** In the %_segdir table, a segment is defined by the values in three +** columns: +** +** start_block +** leaves_end_block +** end_block +** +** When an appendable segment is allocated, it is estimated that the +** maximum number of leaf blocks that may be required is the sum of the +** number of leaf blocks consumed by the input segments, plus the number +** of input segments, multiplied by two. This value is stored in stack +** variable nLeafEst. +** +** A total of 16*nLeafEst blocks are allocated when an appendable segment +** is created ((1 + end_block - start_block)==16*nLeafEst). The contiguous +** array of leaf nodes starts at the first block allocated. The array +** of interior nodes that are parents of the leaf nodes start at block +** (start_block + (1 + end_block - start_block) / 16). And so on. +** +** In the actual code below, the value "16" is replaced with the +** pre-processor macro FTS_MAX_APPENDABLE_HEIGHT. +*/ +static int fts3IncrmergeWriter( + Fts3Table *p, /* Fts3 table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level of input segments */ + int iIdx, /* Index of new output segment */ + Fts3MultiSegReader *pCsr, /* Cursor that data will be read from */ + IncrmergeWriter *pWriter /* Populate this object */ ){ int rc; /* Return Code */ int i; /* Iterator variable */ - sqlite3_stmt *pDelete; /* SQL statement to delete rows */ + int nLeafEst = 0; /* Blocks allocated for leaf nodes */ + sqlite3_stmt *pLeafEst = 0; /* SQL used to determine nLeafEst */ + sqlite3_stmt *pFirstBlock = 0; /* SQL used to determine first block */ - rc = fts3SqlStmt(p, SQL_DELETE_SEGMENTS_RANGE, &pDelete, 0); - for(i=0; rc==SQLITE_OK && iiStartBlock ){ - sqlite3_bind_int64(pDelete, 1, pSegment->iStartBlock); - sqlite3_bind_int64(pDelete, 2, pSegment->iEndBlock); - sqlite3_step(pDelete); - rc = sqlite3_reset(pDelete); + /* Calculate nLeafEst. */ + rc = fts3SqlStmt(p, SQL_MAX_LEAF_NODE_ESTIMATE, &pLeafEst, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pLeafEst, 1, iAbsLevel); + sqlite3_bind_int64(pLeafEst, 2, pCsr->nSegment); + if( SQLITE_ROW==sqlite3_step(pLeafEst) ){ + nLeafEst = sqlite3_column_int(pLeafEst, 0); } + rc = sqlite3_reset(pLeafEst); } - if( rc!=SQLITE_OK ){ - return rc; - } + if( rc!=SQLITE_OK ) return rc; - assert( iLevel>=0 || iLevel==FTS3_SEGCURSOR_ALL ); - if( iLevel==FTS3_SEGCURSOR_ALL ){ - rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_RANGE, &pDelete, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pDelete, 1, iIndex*FTS3_SEGDIR_MAXLEVEL); - sqlite3_bind_int(pDelete, 2, (iIndex+1) * FTS3_SEGDIR_MAXLEVEL - 1); - } - }else{ - rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_LEVEL, &pDelete, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_int(pDelete, 1, iIndex*FTS3_SEGDIR_MAXLEVEL + iLevel); + /* Calculate the first block to use in the output segment */ + rc = fts3SqlStmt(p, SQL_NEXT_SEGMENTS_ID, &pFirstBlock, 0); + if( rc==SQLITE_OK ){ + if( SQLITE_ROW==sqlite3_step(pFirstBlock) ){ + pWriter->iStart = sqlite3_column_int64(pFirstBlock, 0); + pWriter->iEnd = pWriter->iStart - 1; + pWriter->iEnd += nLeafEst * FTS_MAX_APPENDABLE_HEIGHT; } + rc = sqlite3_reset(pFirstBlock); + } + if( rc!=SQLITE_OK ) return rc; + + /* Insert the marker in the %_segments table to make sure nobody tries + ** to steal the space just allocated. This is also used to identify + ** appendable segments. */ + rc = fts3WriteSegment(p, pWriter->iEnd, 0, 0); + if( rc!=SQLITE_OK ) return rc; + + pWriter->iAbsLevel = iAbsLevel; + pWriter->nLeafEst = nLeafEst; + pWriter->iIdx = iIdx; + + /* Set up the array of NodeWriter objects */ + for(i=0; iaNodeWriter[i].iBlock = pWriter->iStart + i*pWriter->nLeafEst; } + return SQLITE_OK; +} + +/* +** Remove an entry from the %_segdir table. This involves running the +** following two statements: +** +** DELETE FROM %_segdir WHERE level = :iAbsLevel AND idx = :iIdx +** UPDATE %_segdir SET idx = idx - 1 WHERE level = :iAbsLevel AND idx > :iIdx +** +** The DELETE statement removes the specific %_segdir level. The UPDATE +** statement ensures that the remaining segments have contiguously allocated +** idx values. +*/ +static int fts3RemoveSegdirEntry( + Fts3Table *p, /* FTS3 table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level to delete from */ + int iIdx /* Index of %_segdir entry to delete */ +){ + int rc; /* Return code */ + sqlite3_stmt *pDelete = 0; /* DELETE statement */ + rc = fts3SqlStmt(p, SQL_DELETE_SEGDIR_ENTRY, &pDelete, 0); if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pDelete, 1, iAbsLevel); + sqlite3_bind_int(pDelete, 2, iIdx); sqlite3_step(pDelete); rc = sqlite3_reset(pDelete); } @@ -121838,689 +143935,847 @@ static int fts3DeleteSegdir( } /* -** When this function is called, buffer *ppList (size *pnList bytes) contains -** a position list that may (or may not) feature multiple columns. This -** function adjusts the pointer *ppList and the length *pnList so that they -** identify the subset of the position list that corresponds to column iCol. -** -** If there are no entries in the input position list for column iCol, then -** *pnList is set to zero before returning. +** One or more segments have just been removed from absolute level iAbsLevel. +** Update the 'idx' values of the remaining segments in the level so that +** the idx values are a contiguous sequence starting from 0. */ -static void fts3ColumnFilter( - int iCol, /* Column to filter on */ - char **ppList, /* IN/OUT: Pointer to position list */ - int *pnList /* IN/OUT: Size of buffer *ppList in bytes */ +static int fts3RepackSegdirLevel( + Fts3Table *p, /* FTS3 table handle */ + sqlite3_int64 iAbsLevel /* Absolute level to repack */ ){ - char *pList = *ppList; - int nList = *pnList; - char *pEnd = &pList[nList]; - int iCurrent = 0; - char *p = pList; + int rc; /* Return code */ + int *aIdx = 0; /* Array of remaining idx values */ + int nIdx = 0; /* Valid entries in aIdx[] */ + int nAlloc = 0; /* Allocated size of aIdx[] */ + int i; /* Iterator variable */ + sqlite3_stmt *pSelect = 0; /* Select statement to read idx values */ + sqlite3_stmt *pUpdate = 0; /* Update statement to modify idx values */ - assert( iCol>=0 ); - while( 1 ){ - char c = 0; - while( p=nAlloc ){ + int *aNew; + nAlloc += 16; + aNew = sqlite3_realloc(aIdx, nAlloc*sizeof(int)); + if( !aNew ){ + rc = SQLITE_NOMEM; + break; + } + aIdx = aNew; + } + aIdx[nIdx++] = sqlite3_column_int(pSelect, 0); } + rc2 = sqlite3_reset(pSelect); + if( rc==SQLITE_OK ) rc = rc2; + } - nList -= (int)(p - pList); - pList = p; - if( nList==0 ){ - break; + if( rc==SQLITE_OK ){ + rc = fts3SqlStmt(p, SQL_SHIFT_SEGDIR_ENTRY, &pUpdate, 0); + } + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pUpdate, 2, iAbsLevel); + } + + assert( p->bIgnoreSavepoint==0 ); + p->bIgnoreSavepoint = 1; + for(i=0; rc==SQLITE_OK && ibIgnoreSavepoint = 0; - *ppList = pList; - *pnList = nList; + sqlite3_free(aIdx); + return rc; +} + +static void fts3StartNode(Blob *pNode, int iHeight, sqlite3_int64 iChild){ + pNode->a[0] = (char)iHeight; + if( iChild ){ + assert( pNode->nAlloc>=1+sqlite3Fts3VarintLen(iChild) ); + pNode->n = 1 + sqlite3Fts3PutVarint(&pNode->a[1], iChild); + }else{ + assert( pNode->nAlloc>=1 ); + pNode->n = 1; + } } /* -** Cache data in the Fts3MultiSegReader.aBuffer[] buffer (overwriting any -** existing data). Grow the buffer if required. +** The first two arguments are a pointer to and the size of a segment b-tree +** node. The node may be a leaf or an internal node. ** -** If successful, return SQLITE_OK. Otherwise, if an OOM error is encountered -** trying to resize the buffer, return SQLITE_NOMEM. +** This function creates a new node image in blob object *pNew by copying +** all terms that are greater than or equal to zTerm/nTerm (for leaf nodes) +** or greater than zTerm/nTerm (for internal nodes) from aNode/nNode. */ -static int fts3MsrBufferData( - Fts3MultiSegReader *pMsr, /* Multi-segment-reader handle */ - char *pList, - int nList +static int fts3TruncateNode( + const char *aNode, /* Current node image */ + int nNode, /* Size of aNode in bytes */ + Blob *pNew, /* OUT: Write new node image here */ + const char *zTerm, /* Omit all terms smaller than this */ + int nTerm, /* Size of zTerm in bytes */ + sqlite3_int64 *piBlock /* OUT: Block number in next layer down */ ){ - if( nList>pMsr->nBuffer ){ - char *pNew; - pMsr->nBuffer = nList*2; - pNew = (char *)sqlite3_realloc(pMsr->aBuffer, pMsr->nBuffer); - if( !pNew ) return SQLITE_NOMEM; - pMsr->aBuffer = pNew; + NodeReader reader; /* Reader object */ + Blob prev = {0, 0, 0}; /* Previous term written to new node */ + int rc = SQLITE_OK; /* Return code */ + int bLeaf = aNode[0]=='\0'; /* True for a leaf node */ + + /* Allocate required output space */ + blobGrowBuffer(pNew, nNode, &rc); + if( rc!=SQLITE_OK ) return rc; + pNew->n = 0; + + /* Populate new node buffer */ + for(rc = nodeReaderInit(&reader, aNode, nNode); + rc==SQLITE_OK && reader.aNode; + rc = nodeReaderNext(&reader) + ){ + if( pNew->n==0 ){ + int res = fts3TermCmp(reader.term.a, reader.term.n, zTerm, nTerm); + if( res<0 || (bLeaf==0 && res==0) ) continue; + fts3StartNode(pNew, (int)aNode[0], reader.iChild); + *piBlock = reader.iChild; + } + rc = fts3AppendToNode( + pNew, &prev, reader.term.a, reader.term.n, + reader.aDoclist, reader.nDoclist + ); + if( rc!=SQLITE_OK ) break; } + if( pNew->n==0 ){ + fts3StartNode(pNew, (int)aNode[0], reader.iChild); + *piBlock = reader.iChild; + } + assert( pNew->n<=pNew->nAlloc ); - memcpy(pMsr->aBuffer, pList, nList); - return SQLITE_OK; + nodeReaderRelease(&reader); + sqlite3_free(prev.a); + return rc; } -SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext( - Fts3Table *p, /* Virtual table handle */ - Fts3MultiSegReader *pMsr, /* Multi-segment-reader handle */ - sqlite3_int64 *piDocid, /* OUT: Docid value */ - char **paPoslist, /* OUT: Pointer to position list */ - int *pnPoslist /* OUT: Size of position list in bytes */ +/* +** Remove all terms smaller than zTerm/nTerm from segment iIdx in absolute +** level iAbsLevel. This may involve deleting entries from the %_segments +** table, and modifying existing entries in both the %_segments and %_segdir +** tables. +** +** SQLITE_OK is returned if the segment is updated successfully. Or an +** SQLite error code otherwise. +*/ +static int fts3TruncateSegment( + Fts3Table *p, /* FTS3 table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level of segment to modify */ + int iIdx, /* Index within level of segment to modify */ + const char *zTerm, /* Remove terms smaller than this */ + int nTerm /* Number of bytes in buffer zTerm */ ){ - int nMerge = pMsr->nAdvance; - Fts3SegReader **apSegment = pMsr->apSegment; - int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( - p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp - ); - - if( nMerge==0 ){ - *paPoslist = 0; - return SQLITE_OK; + int rc = SQLITE_OK; /* Return code */ + Blob root = {0,0,0}; /* New root page image */ + Blob block = {0,0,0}; /* Buffer used for any other block */ + sqlite3_int64 iBlock = 0; /* Block id */ + sqlite3_int64 iNewStart = 0; /* New value for iStartBlock */ + sqlite3_int64 iOldStart = 0; /* Old value for iStartBlock */ + sqlite3_stmt *pFetch = 0; /* Statement used to fetch segdir */ + + rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR, &pFetch, 0); + if( rc==SQLITE_OK ){ + int rc2; /* sqlite3_reset() return code */ + sqlite3_bind_int64(pFetch, 1, iAbsLevel); + sqlite3_bind_int(pFetch, 2, iIdx); + if( SQLITE_ROW==sqlite3_step(pFetch) ){ + const char *aRoot = sqlite3_column_blob(pFetch, 4); + int nRoot = sqlite3_column_bytes(pFetch, 4); + iOldStart = sqlite3_column_int64(pFetch, 1); + rc = fts3TruncateNode(aRoot, nRoot, &root, zTerm, nTerm, &iBlock); + } + rc2 = sqlite3_reset(pFetch); + if( rc==SQLITE_OK ) rc = rc2; } - while( 1 ){ - Fts3SegReader *pSeg; - pSeg = pMsr->apSegment[0]; - - if( pSeg->pOffsetList==0 ){ - *paPoslist = 0; - break; - }else{ - int rc; - char *pList; - int nList; - int j; - sqlite3_int64 iDocid = apSegment[0]->iDocid; + while( rc==SQLITE_OK && iBlock ){ + char *aBlock = 0; + int nBlock = 0; + iNewStart = iBlock; - rc = fts3SegReaderNextDocid(p, apSegment[0], &pList, &nList); - j = 1; - while( rc==SQLITE_OK - && jpOffsetList - && apSegment[j]->iDocid==iDocid - ){ - rc = fts3SegReaderNextDocid(p, apSegment[j], 0, 0); - j++; - } - if( rc!=SQLITE_OK ) return rc; - fts3SegReaderSort(pMsr->apSegment, nMerge, j, xCmp); + rc = sqlite3Fts3ReadBlock(p, iBlock, &aBlock, &nBlock, 0); + if( rc==SQLITE_OK ){ + rc = fts3TruncateNode(aBlock, nBlock, &block, zTerm, nTerm, &iBlock); + } + if( rc==SQLITE_OK ){ + rc = fts3WriteSegment(p, iNewStart, block.a, block.n); + } + sqlite3_free(aBlock); + } - if( pMsr->iColFilter>=0 ){ - fts3ColumnFilter(pMsr->iColFilter, &pList, &nList); - } + /* Variable iNewStart now contains the first valid leaf node. */ + if( rc==SQLITE_OK && iNewStart ){ + sqlite3_stmt *pDel = 0; + rc = fts3SqlStmt(p, SQL_DELETE_SEGMENTS_RANGE, &pDel, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pDel, 1, iOldStart); + sqlite3_bind_int64(pDel, 2, iNewStart-1); + sqlite3_step(pDel); + rc = sqlite3_reset(pDel); + } + } - if( nList>0 ){ - if( fts3SegReaderIsPending(apSegment[0]) ){ - rc = fts3MsrBufferData(pMsr, pList, nList+1); - if( rc!=SQLITE_OK ) return rc; - *paPoslist = pMsr->aBuffer; - assert( (pMsr->aBuffer[nList] & 0xFE)==0x00 ); - }else{ - *paPoslist = pList; - } - *piDocid = iDocid; - *pnPoslist = nList; - break; - } + if( rc==SQLITE_OK ){ + sqlite3_stmt *pChomp = 0; + rc = fts3SqlStmt(p, SQL_CHOMP_SEGDIR, &pChomp, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pChomp, 1, iNewStart); + sqlite3_bind_blob(pChomp, 2, root.a, root.n, SQLITE_STATIC); + sqlite3_bind_int64(pChomp, 3, iAbsLevel); + sqlite3_bind_int(pChomp, 4, iIdx); + sqlite3_step(pChomp); + rc = sqlite3_reset(pChomp); } } - return SQLITE_OK; + sqlite3_free(root.a); + sqlite3_free(block.a); + return rc; } -static int fts3SegReaderStart( - Fts3Table *p, /* Virtual table handle */ - Fts3MultiSegReader *pCsr, /* Cursor object */ - const char *zTerm, /* Term searched for (or NULL) */ - int nTerm /* Length of zTerm in bytes */ +/* +** This function is called after an incrmental-merge operation has run to +** merge (or partially merge) two or more segments from absolute level +** iAbsLevel. +** +** Each input segment is either removed from the db completely (if all of +** its data was copied to the output segment by the incrmerge operation) +** or modified in place so that it no longer contains those entries that +** have been duplicated in the output segment. +*/ +static int fts3IncrmergeChomp( + Fts3Table *p, /* FTS table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level containing segments */ + Fts3MultiSegReader *pCsr, /* Chomp all segments opened by this cursor */ + int *pnRem /* Number of segments not deleted */ ){ int i; - int nSeg = pCsr->nSegment; + int nRem = 0; + int rc = SQLITE_OK; - /* If the Fts3SegFilter defines a specific term (or term prefix) to search - ** for, then advance each segment iterator until it points to a term of - ** equal or greater value than the specified term. This prevents many - ** unnecessary merge/sort operations for the case where single segment - ** b-tree leaf nodes contain more than one term. - */ - for(i=0; pCsr->bRestart==0 && inSegment; i++){ - Fts3SegReader *pSeg = pCsr->apSegment[i]; - do { - int rc = fts3SegReaderNext(p, pSeg, 0); - if( rc!=SQLITE_OK ) return rc; - }while( zTerm && fts3SegReaderTermCmp(pSeg, zTerm, nTerm)<0 ); + for(i=pCsr->nSegment-1; i>=0 && rc==SQLITE_OK; i--){ + Fts3SegReader *pSeg = 0; + int j; + + /* Find the Fts3SegReader object with Fts3SegReader.iIdx==i. It is hiding + ** somewhere in the pCsr->apSegment[] array. */ + for(j=0; ALWAYS(jnSegment); j++){ + pSeg = pCsr->apSegment[j]; + if( pSeg->iIdx==i ) break; + } + assert( jnSegment && pSeg->iIdx==i ); + + if( pSeg->aNode==0 ){ + /* Seg-reader is at EOF. Remove the entire input segment. */ + rc = fts3DeleteSegment(p, pSeg); + if( rc==SQLITE_OK ){ + rc = fts3RemoveSegdirEntry(p, iAbsLevel, pSeg->iIdx); + } + *pnRem = 0; + }else{ + /* The incremental merge did not copy all the data from this + ** segment to the upper level. The segment is modified in place + ** so that it contains no keys smaller than zTerm/nTerm. */ + const char *zTerm = pSeg->zTerm; + int nTerm = pSeg->nTerm; + rc = fts3TruncateSegment(p, iAbsLevel, pSeg->iIdx, zTerm, nTerm); + nRem++; + } } - fts3SegReaderSort(pCsr->apSegment, nSeg, nSeg, fts3SegReaderCmp); - return SQLITE_OK; -} + if( rc==SQLITE_OK && nRem!=pCsr->nSegment ){ + rc = fts3RepackSegdirLevel(p, iAbsLevel); + } -SQLITE_PRIVATE int sqlite3Fts3SegReaderStart( - Fts3Table *p, /* Virtual table handle */ - Fts3MultiSegReader *pCsr, /* Cursor object */ - Fts3SegFilter *pFilter /* Restrictions on range of iteration */ -){ - pCsr->pFilter = pFilter; - return fts3SegReaderStart(p, pCsr, pFilter->zTerm, pFilter->nTerm); + *pnRem = nRem; + return rc; } -SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart( - Fts3Table *p, /* Virtual table handle */ - Fts3MultiSegReader *pCsr, /* Cursor object */ - int iCol, /* Column to match on. */ - const char *zTerm, /* Term to iterate through a doclist for */ - int nTerm /* Number of bytes in zTerm */ -){ - int i; - int rc; - int nSegment = pCsr->nSegment; - int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( - p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp - ); +/* +** Store an incr-merge hint in the database. +*/ +static int fts3IncrmergeHintStore(Fts3Table *p, Blob *pHint){ + sqlite3_stmt *pReplace = 0; + int rc; /* Return code */ - assert( pCsr->pFilter==0 ); - assert( zTerm && nTerm>0 ); + rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pReplace, 0); + if( rc==SQLITE_OK ){ + sqlite3_bind_int(pReplace, 1, FTS_STAT_INCRMERGEHINT); + sqlite3_bind_blob(pReplace, 2, pHint->a, pHint->n, SQLITE_STATIC); + sqlite3_step(pReplace); + rc = sqlite3_reset(pReplace); + } - /* Advance each segment iterator until it points to the term zTerm/nTerm. */ - rc = fts3SegReaderStart(p, pCsr, zTerm, nTerm); - if( rc!=SQLITE_OK ) return rc; + return rc; +} - /* Determine how many of the segments actually point to zTerm/nTerm. */ - for(i=0; iapSegment[i]; - if( !pSeg->aNode || fts3SegReaderTermCmp(pSeg, zTerm, nTerm) ){ - break; - } - } - pCsr->nAdvance = i; +/* +** Load an incr-merge hint from the database. The incr-merge hint, if one +** exists, is stored in the rowid==1 row of the %_stat table. +** +** If successful, populate blob *pHint with the value read from the %_stat +** table and return SQLITE_OK. Otherwise, if an error occurs, return an +** SQLite error code. +*/ +static int fts3IncrmergeHintLoad(Fts3Table *p, Blob *pHint){ + sqlite3_stmt *pSelect = 0; + int rc; - /* Advance each of the segments to point to the first docid. */ - for(i=0; inAdvance; i++){ - rc = fts3SegReaderFirstDocid(p, pCsr->apSegment[i]); - if( rc!=SQLITE_OK ) return rc; + pHint->n = 0; + rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pSelect, 0); + if( rc==SQLITE_OK ){ + int rc2; + sqlite3_bind_int(pSelect, 1, FTS_STAT_INCRMERGEHINT); + if( SQLITE_ROW==sqlite3_step(pSelect) ){ + const char *aHint = sqlite3_column_blob(pSelect, 0); + int nHint = sqlite3_column_bytes(pSelect, 0); + if( aHint ){ + blobGrowBuffer(pHint, nHint, &rc); + if( rc==SQLITE_OK ){ + memcpy(pHint->a, aHint, nHint); + pHint->n = nHint; + } + } + } + rc2 = sqlite3_reset(pSelect); + if( rc==SQLITE_OK ) rc = rc2; } - fts3SegReaderSort(pCsr->apSegment, i, i, xCmp); - - assert( iCol<0 || iColnColumn ); - pCsr->iColFilter = iCol; - return SQLITE_OK; + return rc; } /* -** This function is called on a MultiSegReader that has been started using -** sqlite3Fts3MsrIncrStart(). One or more calls to MsrIncrNext() may also -** have been made. Calling this function puts the MultiSegReader in such -** a state that if the next two calls are: +** If *pRc is not SQLITE_OK when this function is called, it is a no-op. +** Otherwise, append an entry to the hint stored in blob *pHint. Each entry +** consists of two varints, the absolute level number of the input segments +** and the number of input segments. ** -** sqlite3Fts3SegReaderStart() -** sqlite3Fts3SegReaderStep() +** If successful, leave *pRc set to SQLITE_OK and return. If an error occurs, +** set *pRc to an SQLite error code before returning. +*/ +static void fts3IncrmergeHintPush( + Blob *pHint, /* Hint blob to append to */ + i64 iAbsLevel, /* First varint to store in hint */ + int nInput, /* Second varint to store in hint */ + int *pRc /* IN/OUT: Error code */ +){ + blobGrowBuffer(pHint, pHint->n + 2*FTS3_VARINT_MAX, pRc); + if( *pRc==SQLITE_OK ){ + pHint->n += sqlite3Fts3PutVarint(&pHint->a[pHint->n], iAbsLevel); + pHint->n += sqlite3Fts3PutVarint(&pHint->a[pHint->n], (i64)nInput); + } +} + +/* +** Read the last entry (most recently pushed) from the hint blob *pHint +** and then remove the entry. Write the two values read to *piAbsLevel and +** *pnInput before returning. ** -** then the entire doclist for the term is available in -** MultiSegReader.aDoclist/nDoclist. +** If no error occurs, return SQLITE_OK. If the hint blob in *pHint does +** not contain at least two valid varints, return SQLITE_CORRUPT_VTAB. */ -SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr){ - int i; /* Used to iterate through segment-readers */ +static int fts3IncrmergeHintPop(Blob *pHint, i64 *piAbsLevel, int *pnInput){ + const int nHint = pHint->n; + int i; - assert( pCsr->zTerm==0 ); - assert( pCsr->nTerm==0 ); - assert( pCsr->aDoclist==0 ); - assert( pCsr->nDoclist==0 ); + i = pHint->n-2; + while( i>0 && (pHint->a[i-1] & 0x80) ) i--; + while( i>0 && (pHint->a[i-1] & 0x80) ) i--; - pCsr->nAdvance = 0; - pCsr->bRestart = 1; - for(i=0; inSegment; i++){ - pCsr->apSegment[i]->pOffsetList = 0; - pCsr->apSegment[i]->nOffsetList = 0; - pCsr->apSegment[i]->iDocid = 0; - } + pHint->n = i; + i += sqlite3Fts3GetVarint(&pHint->a[i], piAbsLevel); + i += fts3GetVarint32(&pHint->a[i], pnInput); + if( i!=nHint ) return SQLITE_CORRUPT_VTAB; return SQLITE_OK; } -SQLITE_PRIVATE int sqlite3Fts3SegReaderStep( - Fts3Table *p, /* Virtual table handle */ - Fts3MultiSegReader *pCsr /* Cursor object */ -){ - int rc = SQLITE_OK; - - int isIgnoreEmpty = (pCsr->pFilter->flags & FTS3_SEGMENT_IGNORE_EMPTY); - int isRequirePos = (pCsr->pFilter->flags & FTS3_SEGMENT_REQUIRE_POS); - int isColFilter = (pCsr->pFilter->flags & FTS3_SEGMENT_COLUMN_FILTER); - int isPrefix = (pCsr->pFilter->flags & FTS3_SEGMENT_PREFIX); - int isScan = (pCsr->pFilter->flags & FTS3_SEGMENT_SCAN); - - Fts3SegReader **apSegment = pCsr->apSegment; - int nSegment = pCsr->nSegment; - Fts3SegFilter *pFilter = pCsr->pFilter; - int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = ( - p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp - ); - - if( pCsr->nSegment==0 ) return SQLITE_OK; +/* +** Attempt an incremental merge that writes nMerge leaf blocks. +** +** Incremental merges happen nMin segments at a time. The segments +** to be merged are the nMin oldest segments (the ones with the smallest +** values for the _segdir.idx field) in the highest level that contains +** at least nMin segments. Multiple merges might occur in an attempt to +** write the quota of nMerge leaf blocks. +*/ +SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){ + int rc; /* Return code */ + int nRem = nMerge; /* Number of leaf pages yet to be written */ + Fts3MultiSegReader *pCsr; /* Cursor used to read input data */ + Fts3SegFilter *pFilter; /* Filter used with cursor pCsr */ + IncrmergeWriter *pWriter; /* Writer object */ + int nSeg = 0; /* Number of input segments */ + sqlite3_int64 iAbsLevel = 0; /* Absolute level number to work on */ + Blob hint = {0, 0, 0}; /* Hint read from %_stat table */ + int bDirtyHint = 0; /* True if blob 'hint' has been modified */ + + /* Allocate space for the cursor, filter and writer objects */ + const int nAlloc = sizeof(*pCsr) + sizeof(*pFilter) + sizeof(*pWriter); + pWriter = (IncrmergeWriter *)sqlite3_malloc(nAlloc); + if( !pWriter ) return SQLITE_NOMEM; + pFilter = (Fts3SegFilter *)&pWriter[1]; + pCsr = (Fts3MultiSegReader *)&pFilter[1]; + + rc = fts3IncrmergeHintLoad(p, &hint); + while( rc==SQLITE_OK && nRem>0 ){ + const i64 nMod = FTS3_SEGDIR_MAXLEVEL * p->nIndex; + sqlite3_stmt *pFindLevel = 0; /* SQL used to determine iAbsLevel */ + int bUseHint = 0; /* True if attempting to append */ + int iIdx = 0; /* Largest idx in level (iAbsLevel+1) */ + + /* Search the %_segdir table for the absolute level with the smallest + ** relative level number that contains at least nMin segments, if any. + ** If one is found, set iAbsLevel to the absolute level number and + ** nSeg to nMin. If no level with at least nMin segments can be found, + ** set nSeg to -1. + */ + rc = fts3SqlStmt(p, SQL_FIND_MERGE_LEVEL, &pFindLevel, 0); + sqlite3_bind_int(pFindLevel, 1, nMin); + if( sqlite3_step(pFindLevel)==SQLITE_ROW ){ + iAbsLevel = sqlite3_column_int64(pFindLevel, 0); + nSeg = nMin; + }else{ + nSeg = -1; + } + rc = sqlite3_reset(pFindLevel); - do { - int nMerge; - int i; - - /* Advance the first pCsr->nAdvance entries in the apSegment[] array - ** forward. Then sort the list in order of current term again. + /* If the hint read from the %_stat table is not empty, check if the + ** last entry in it specifies a relative level smaller than or equal + ** to the level identified by the block above (if any). If so, this + ** iteration of the loop will work on merging at the hinted level. */ - for(i=0; inAdvance; i++){ - rc = fts3SegReaderNext(p, apSegment[i], 0); - if( rc!=SQLITE_OK ) return rc; + if( rc==SQLITE_OK && hint.n ){ + int nHint = hint.n; + sqlite3_int64 iHintAbsLevel = 0; /* Hint level */ + int nHintSeg = 0; /* Hint number of segments */ + + rc = fts3IncrmergeHintPop(&hint, &iHintAbsLevel, &nHintSeg); + if( nSeg<0 || (iAbsLevel % nMod) >= (iHintAbsLevel % nMod) ){ + iAbsLevel = iHintAbsLevel; + nSeg = nHintSeg; + bUseHint = 1; + bDirtyHint = 1; + }else{ + /* This undoes the effect of the HintPop() above - so that no entry + ** is removed from the hint blob. */ + hint.n = nHint; + } } - fts3SegReaderSort(apSegment, nSegment, pCsr->nAdvance, fts3SegReaderCmp); - pCsr->nAdvance = 0; - /* If all the seg-readers are at EOF, we're finished. return SQLITE_OK. */ - assert( rc==SQLITE_OK ); - if( apSegment[0]->aNode==0 ) break; + /* If nSeg is less that zero, then there is no level with at least + ** nMin segments and no hint in the %_stat table. No work to do. + ** Exit early in this case. */ + if( nSeg<0 ) break; - pCsr->nTerm = apSegment[0]->nTerm; - pCsr->zTerm = apSegment[0]->zTerm; + /* Open a cursor to iterate through the contents of the oldest nSeg + ** indexes of absolute level iAbsLevel. If this cursor is opened using + ** the 'hint' parameters, it is possible that there are less than nSeg + ** segments available in level iAbsLevel. In this case, no work is + ** done on iAbsLevel - fall through to the next iteration of the loop + ** to start work on some other level. */ + memset(pWriter, 0, nAlloc); + pFilter->flags = FTS3_SEGMENT_REQUIRE_POS; - /* If this is a prefix-search, and if the term that apSegment[0] points - ** to does not share a suffix with pFilter->zTerm/nTerm, then all - ** required callbacks have been made. In this case exit early. - ** - ** Similarly, if this is a search for an exact match, and the first term - ** of segment apSegment[0] is not a match, exit early. - */ - if( pFilter->zTerm && !isScan ){ - if( pCsr->nTermnTerm - || (!isPrefix && pCsr->nTerm>pFilter->nTerm) - || memcmp(pCsr->zTerm, pFilter->zTerm, pFilter->nTerm) - ){ - break; + if( rc==SQLITE_OK ){ + rc = fts3IncrmergeOutputIdx(p, iAbsLevel, &iIdx); + assert( bUseHint==1 || bUseHint==0 ); + if( iIdx==0 || (bUseHint && iIdx==1) ){ + int bIgnore = 0; + rc = fts3SegmentIsMaxLevel(p, iAbsLevel+1, &bIgnore); + if( bIgnore ){ + pFilter->flags |= FTS3_SEGMENT_IGNORE_EMPTY; + } } } - nMerge = 1; - while( nMergeaNode - && apSegment[nMerge]->nTerm==pCsr->nTerm - && 0==memcmp(pCsr->zTerm, apSegment[nMerge]->zTerm, pCsr->nTerm) - ){ - nMerge++; + if( rc==SQLITE_OK ){ + rc = fts3IncrmergeCsr(p, iAbsLevel, nSeg, pCsr); } - - assert( isIgnoreEmpty || (isRequirePos && !isColFilter) ); - if( nMerge==1 - && !isIgnoreEmpty - && (p->bDescIdx==0 || fts3SegReaderIsPending(apSegment[0])==0) + if( SQLITE_OK==rc && pCsr->nSegment==nSeg + && SQLITE_OK==(rc = sqlite3Fts3SegReaderStart(p, pCsr, pFilter)) + && SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, pCsr)) ){ - pCsr->nDoclist = apSegment[0]->nDoclist; - if( fts3SegReaderIsPending(apSegment[0]) ){ - rc = fts3MsrBufferData(pCsr, apSegment[0]->aDoclist, pCsr->nDoclist); - pCsr->aDoclist = pCsr->aBuffer; + if( bUseHint && iIdx>0 ){ + const char *zKey = pCsr->zTerm; + int nKey = pCsr->nTerm; + rc = fts3IncrmergeLoad(p, iAbsLevel, iIdx-1, zKey, nKey, pWriter); }else{ - pCsr->aDoclist = apSegment[0]->aDoclist; - } - if( rc==SQLITE_OK ) rc = SQLITE_ROW; - }else{ - int nDoclist = 0; /* Size of doclist */ - sqlite3_int64 iPrev = 0; /* Previous docid stored in doclist */ - - /* The current term of the first nMerge entries in the array - ** of Fts3SegReader objects is the same. The doclists must be merged - ** and a single term returned with the merged doclist. - */ - for(i=0; ipOffsetList ){ - int j; /* Number of segments that share a docid */ - char *pList; - int nList; - int nByte; - sqlite3_int64 iDocid = apSegment[0]->iDocid; - fts3SegReaderNextDocid(p, apSegment[0], &pList, &nList); - j = 1; - while( jpOffsetList - && apSegment[j]->iDocid==iDocid - ){ - fts3SegReaderNextDocid(p, apSegment[j], 0, 0); - j++; - } - - if( isColFilter ){ - fts3ColumnFilter(pFilter->iCol, &pList, &nList); - } - - if( !isIgnoreEmpty || nList>0 ){ - /* Calculate the 'docid' delta value to write into the merged - ** doclist. */ - sqlite3_int64 iDelta; - if( p->bDescIdx && nDoclist>0 ){ - iDelta = iPrev - iDocid; - }else{ - iDelta = iDocid - iPrev; - } - assert( iDelta>0 || (nDoclist==0 && iDelta==iDocid) ); - assert( nDoclist>0 || iDelta==iDocid ); + if( rc==SQLITE_OK && pWriter->nLeafEst ){ + fts3LogMerge(nSeg, iAbsLevel); + do { + rc = fts3IncrmergeAppend(p, pWriter, pCsr); + if( rc==SQLITE_OK ) rc = sqlite3Fts3SegReaderStep(p, pCsr); + if( pWriter->nWork>=nRem && rc==SQLITE_ROW ) rc = SQLITE_OK; + }while( rc==SQLITE_ROW ); - nByte = sqlite3Fts3VarintLen(iDelta) + (isRequirePos?nList+1:0); - if( nDoclist+nByte>pCsr->nBuffer ){ - char *aNew; - pCsr->nBuffer = (nDoclist+nByte)*2; - aNew = sqlite3_realloc(pCsr->aBuffer, pCsr->nBuffer); - if( !aNew ){ - return SQLITE_NOMEM; - } - pCsr->aBuffer = aNew; - } - nDoclist += sqlite3Fts3PutVarint(&pCsr->aBuffer[nDoclist], iDelta); - iPrev = iDocid; - if( isRequirePos ){ - memcpy(&pCsr->aBuffer[nDoclist], pList, nList); - nDoclist += nList; - pCsr->aBuffer[nDoclist++] = '\0'; + /* Update or delete the input segments */ + if( rc==SQLITE_OK ){ + nRem -= (1 + pWriter->nWork); + rc = fts3IncrmergeChomp(p, iAbsLevel, pCsr, &nSeg); + if( nSeg!=0 ){ + bDirtyHint = 1; + fts3IncrmergeHintPush(&hint, iAbsLevel, nSeg, &rc); } } + } - fts3SegReaderSort(apSegment, nMerge, j, xCmp); + if( nSeg!=0 ){ + pWriter->nLeafData = pWriter->nLeafData * -1; } - if( nDoclist>0 ){ - pCsr->aDoclist = pCsr->aBuffer; - pCsr->nDoclist = nDoclist; - rc = SQLITE_ROW; + fts3IncrmergeRelease(p, pWriter, &rc); + if( nSeg==0 && pWriter->bNoLeafData==0 ){ + fts3PromoteSegments(p, iAbsLevel+1, pWriter->nLeafData); } } - pCsr->nAdvance = nMerge; - }while( rc==SQLITE_OK ); - return rc; -} + sqlite3Fts3SegReaderFinish(pCsr); + } + /* Write the hint values into the %_stat table for the next incr-merger */ + if( bDirtyHint && rc==SQLITE_OK ){ + rc = fts3IncrmergeHintStore(p, &hint); + } -SQLITE_PRIVATE void sqlite3Fts3SegReaderFinish( - Fts3MultiSegReader *pCsr /* Cursor object */ -){ - if( pCsr ){ - int i; - for(i=0; inSegment; i++){ - sqlite3Fts3SegReaderFree(pCsr->apSegment[i]); - } - sqlite3_free(pCsr->apSegment); - sqlite3_free(pCsr->aBuffer); + sqlite3_free(pWriter); + sqlite3_free(hint.a); + return rc; +} - pCsr->nSegment = 0; - pCsr->apSegment = 0; - pCsr->aBuffer = 0; - } +/* +** Convert the text beginning at *pz into an integer and return +** its value. Advance *pz to point to the first character past +** the integer. +*/ +static int fts3Getint(const char **pz){ + const char *z = *pz; + int i = 0; + while( (*z)>='0' && (*z)<='9' ) i = 10*i + *(z++) - '0'; + *pz = z; + return i; } /* -** Merge all level iLevel segments in the database into a single -** iLevel+1 segment. Or, if iLevel<0, merge all segments into a -** single segment with a level equal to the numerically largest level -** currently present in the database. +** Process statements of the form: ** -** If this function is called with iLevel<0, but there is only one -** segment in the database, SQLITE_DONE is returned immediately. -** Otherwise, if successful, SQLITE_OK is returned. If an error occurs, -** an SQLite error code is returned. +** INSERT INTO table(table) VALUES('merge=A,B'); +** +** A and B are integers that decode to be the number of leaf pages +** written for the merge, and the minimum number of segments on a level +** before it will be selected for a merge, respectively. */ -static int fts3SegmentMerge(Fts3Table *p, int iIndex, int iLevel){ - int rc; /* Return code */ - int iIdx = 0; /* Index of new segment */ - int iNewLevel = 0; /* Level/index to create new segment at */ - SegmentWriter *pWriter = 0; /* Used to write the new, merged, segment */ - Fts3SegFilter filter; /* Segment term filter condition */ - Fts3MultiSegReader csr; /* Cursor to iterate through level(s) */ - int bIgnoreEmpty = 0; /* True to ignore empty segments */ - - assert( iLevel==FTS3_SEGCURSOR_ALL - || iLevel==FTS3_SEGCURSOR_PENDING - || iLevel>=0 - ); - assert( iLevel=0 && iIndexnIndex ); - - rc = sqlite3Fts3SegReaderCursor(p, iIndex, iLevel, 0, 0, 1, 0, &csr); - if( rc!=SQLITE_OK || csr.nSegment==0 ) goto finished; - - if( iLevel==FTS3_SEGCURSOR_ALL ){ - /* This call is to merge all segments in the database to a single - ** segment. The level of the new segment is equal to the the numerically - ** greatest segment level currently present in the database for this - ** index. The idx of the new segment is always 0. */ - if( csr.nSegment==1 ){ - rc = SQLITE_DONE; - goto finished; - } - rc = fts3SegmentMaxLevel(p, iIndex, &iNewLevel); - bIgnoreEmpty = 1; - - }else if( iLevel==FTS3_SEGCURSOR_PENDING ){ - iNewLevel = iIndex * FTS3_SEGDIR_MAXLEVEL; - rc = fts3AllocateSegdirIdx(p, iIndex, 0, &iIdx); - }else{ - /* This call is to merge all segments at level iLevel. find the next - ** available segment index at level iLevel+1. The call to - ** fts3AllocateSegdirIdx() will merge the segments at level iLevel+1 to - ** a single iLevel+2 segment if necessary. */ - rc = fts3AllocateSegdirIdx(p, iIndex, iLevel+1, &iIdx); - iNewLevel = iIndex * FTS3_SEGDIR_MAXLEVEL + iLevel+1; - } - if( rc!=SQLITE_OK ) goto finished; - assert( csr.nSegment>0 ); - assert( iNewLevel>=(iIndex*FTS3_SEGDIR_MAXLEVEL) ); - assert( iNewLevel<((iIndex+1)*FTS3_SEGDIR_MAXLEVEL) ); +static int fts3DoIncrmerge( + Fts3Table *p, /* FTS3 table handle */ + const char *zParam /* Nul-terminated string containing "A,B" */ +){ + int rc; + int nMin = (FTS3_MERGE_COUNT / 2); + int nMerge = 0; + const char *z = zParam; - memset(&filter, 0, sizeof(Fts3SegFilter)); - filter.flags = FTS3_SEGMENT_REQUIRE_POS; - filter.flags |= (bIgnoreEmpty ? FTS3_SEGMENT_IGNORE_EMPTY : 0); + /* Read the first integer value */ + nMerge = fts3Getint(&z); - rc = sqlite3Fts3SegReaderStart(p, &csr, &filter); - while( SQLITE_OK==rc ){ - rc = sqlite3Fts3SegReaderStep(p, &csr); - if( rc!=SQLITE_ROW ) break; - rc = fts3SegWriterAdd(p, &pWriter, 1, - csr.zTerm, csr.nTerm, csr.aDoclist, csr.nDoclist); + /* If the first integer value is followed by a ',', read the second + ** integer value. */ + if( z[0]==',' && z[1]!='\0' ){ + z++; + nMin = fts3Getint(&z); } - if( rc!=SQLITE_OK ) goto finished; - assert( pWriter ); - if( iLevel!=FTS3_SEGCURSOR_PENDING ){ - rc = fts3DeleteSegdir(p, iIndex, iLevel, csr.apSegment, csr.nSegment); - if( rc!=SQLITE_OK ) goto finished; + if( z[0]!='\0' || nMin<2 ){ + rc = SQLITE_ERROR; + }else{ + rc = SQLITE_OK; + if( !p->bHasStat ){ + assert( p->bFts4==0 ); + sqlite3Fts3CreateStatTable(&rc, p); + } + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3Incrmerge(p, nMerge, nMin); + } + sqlite3Fts3SegmentsClose(p); } - rc = fts3SegWriterFlush(p, pWriter, iNewLevel, iIdx); - - finished: - fts3SegWriterFree(pWriter); - sqlite3Fts3SegReaderFinish(&csr); return rc; } - -/* -** Flush the contents of pendingTerms to level 0 segments. +/* +** Process statements of the form: +** +** INSERT INTO table(table) VALUES('automerge=X'); +** +** where X is an integer. X==0 means to turn automerge off. X!=0 means +** turn it on. The setting is persistent. */ -SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *p){ +static int fts3DoAutoincrmerge( + Fts3Table *p, /* FTS3 table handle */ + const char *zParam /* Nul-terminated string containing boolean */ +){ int rc = SQLITE_OK; - int i; - for(i=0; rc==SQLITE_OK && inIndex; i++){ - rc = fts3SegmentMerge(p, i, FTS3_SEGCURSOR_PENDING); - if( rc==SQLITE_DONE ) rc = SQLITE_OK; + sqlite3_stmt *pStmt = 0; + p->nAutoincrmerge = fts3Getint(&zParam); + if( p->nAutoincrmerge==1 || p->nAutoincrmerge>FTS3_MERGE_COUNT ){ + p->nAutoincrmerge = 8; } - sqlite3Fts3PendingTermsClear(p); + if( !p->bHasStat ){ + assert( p->bFts4==0 ); + sqlite3Fts3CreateStatTable(&rc, p); + if( rc ) return rc; + } + rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pStmt, 0); + if( rc ) return rc; + sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE); + sqlite3_bind_int(pStmt, 2, p->nAutoincrmerge); + sqlite3_step(pStmt); + rc = sqlite3_reset(pStmt); return rc; } /* -** Encode N integers as varints into a blob. +** Return a 64-bit checksum for the FTS index entry specified by the +** arguments to this function. */ -static void fts3EncodeIntArray( - int N, /* The number of integers to encode */ - u32 *a, /* The integer values */ - char *zBuf, /* Write the BLOB here */ - int *pNBuf /* Write number of bytes if zBuf[] used here */ +static u64 fts3ChecksumEntry( + const char *zTerm, /* Pointer to buffer containing term */ + int nTerm, /* Size of zTerm in bytes */ + int iLangid, /* Language id for current row */ + int iIndex, /* Index (0..Fts3Table.nIndex-1) */ + i64 iDocid, /* Docid for current row. */ + int iCol, /* Column number */ + int iPos /* Position */ ){ - int i, j; - for(i=j=0; iiPrevDocid. The sizes are encoded as -** a blob of varints. +** Return a checksum of all entries in the FTS index that correspond to +** language id iLangid. The checksum is calculated by XORing the checksums +** of each individual entry (see fts3ChecksumEntry()) together. +** +** If successful, the checksum value is returned and *pRc set to SQLITE_OK. +** Otherwise, if an error occurs, *pRc is set to an SQLite error code. The +** return value is undefined in this case. */ -static void fts3InsertDocsize( - int *pRC, /* Result code */ - Fts3Table *p, /* Table into which to insert */ - u32 *aSz /* Sizes of each column */ +static u64 fts3ChecksumIndex( + Fts3Table *p, /* FTS3 table handle */ + int iLangid, /* Language id to return cksum for */ + int iIndex, /* Index to cksum (0..p->nIndex-1) */ + int *pRc /* OUT: Return code */ ){ - char *pBlob; /* The BLOB encoding of the document size */ - int nBlob; /* Number of bytes in the BLOB */ - sqlite3_stmt *pStmt; /* Statement used to insert the encoding */ - int rc; /* Result code from subfunctions */ + Fts3SegFilter filter; + Fts3MultiSegReader csr; + int rc; + u64 cksum = 0; - if( *pRC ) return; - pBlob = sqlite3_malloc( 10*p->nColumn ); - if( pBlob==0 ){ - *pRC = SQLITE_NOMEM; - return; + assert( *pRc==SQLITE_OK ); + + memset(&filter, 0, sizeof(filter)); + memset(&csr, 0, sizeof(csr)); + filter.flags = FTS3_SEGMENT_REQUIRE_POS|FTS3_SEGMENT_IGNORE_EMPTY; + filter.flags |= FTS3_SEGMENT_SCAN; + + rc = sqlite3Fts3SegReaderCursor( + p, iLangid, iIndex, FTS3_SEGCURSOR_ALL, 0, 0, 0, 1,&csr + ); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3SegReaderStart(p, &csr, &filter); } - fts3EncodeIntArray(p->nColumn, aSz, pBlob, &nBlob); - rc = fts3SqlStmt(p, SQL_REPLACE_DOCSIZE, &pStmt, 0); - if( rc ){ - sqlite3_free(pBlob); - *pRC = rc; - return; + + if( rc==SQLITE_OK ){ + while( SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, &csr)) ){ + char *pCsr = csr.aDoclist; + char *pEnd = &pCsr[csr.nDoclist]; + + i64 iDocid = 0; + i64 iCol = 0; + i64 iPos = 0; + + pCsr += sqlite3Fts3GetVarint(pCsr, &iDocid); + while( pCsriPrevDocid); - sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, sqlite3_free); - sqlite3_step(pStmt); - *pRC = sqlite3_reset(pStmt); + sqlite3Fts3SegReaderFinish(&csr); + + *pRc = rc; + return cksum; } /* -** Record 0 of the %_stat table contains a blob consisting of N varints, -** where N is the number of user defined columns in the fts3 table plus -** two. If nCol is the number of user defined columns, then values of the -** varints are set as follows: -** -** Varint 0: Total number of rows in the table. -** -** Varint 1..nCol: For each column, the total number of tokens stored in -** the column for all rows of the table. -** -** Varint 1+nCol: The total size, in bytes, of all text values in all -** columns of all rows of the table. +** Check if the contents of the FTS index match the current contents of the +** content table. If no error occurs and the contents do match, set *pbOk +** to true and return SQLITE_OK. Or if the contents do not match, set *pbOk +** to false before returning. ** +** If an error occurs (e.g. an OOM or IO error), return an SQLite error +** code. The final value of *pbOk is undefined in this case. */ -static void fts3UpdateDocTotals( - int *pRC, /* The result code */ - Fts3Table *p, /* Table being updated */ - u32 *aSzIns, /* Size increases */ - u32 *aSzDel, /* Size decreases */ - int nChng /* Change in the number of documents */ -){ - char *pBlob; /* Storage for BLOB written into %_stat */ - int nBlob; /* Size of BLOB written into %_stat */ - u32 *a; /* Array of integers that becomes the BLOB */ - sqlite3_stmt *pStmt; /* Statement for reading and writing */ - int i; /* Loop counter */ - int rc; /* Result code from subfunctions */ - - const int nStat = p->nColumn+2; +static int fts3IntegrityCheck(Fts3Table *p, int *pbOk){ + int rc = SQLITE_OK; /* Return code */ + u64 cksum1 = 0; /* Checksum based on FTS index contents */ + u64 cksum2 = 0; /* Checksum based on %_content contents */ + sqlite3_stmt *pAllLangid = 0; /* Statement to return all language-ids */ - if( *pRC ) return; - a = sqlite3_malloc( (sizeof(u32)+10)*nStat ); - if( a==0 ){ - *pRC = SQLITE_NOMEM; - return; - } - pBlob = (char*)&a[nStat]; - rc = fts3SqlStmt(p, SQL_SELECT_DOCTOTAL, &pStmt, 0); - if( rc ){ - sqlite3_free(a); - *pRC = rc; - return; - } - if( sqlite3_step(pStmt)==SQLITE_ROW ){ - fts3DecodeIntArray(nStat, a, - sqlite3_column_blob(pStmt, 0), - sqlite3_column_bytes(pStmt, 0)); - }else{ - memset(a, 0, sizeof(u32)*(nStat) ); - } - sqlite3_reset(pStmt); - if( nChng<0 && a[0]<(u32)(-nChng) ){ - a[0] = 0; - }else{ - a[0] += nChng; + /* This block calculates the checksum according to the FTS index. */ + rc = fts3SqlStmt(p, SQL_SELECT_ALL_LANGID, &pAllLangid, 0); + if( rc==SQLITE_OK ){ + int rc2; + sqlite3_bind_int(pAllLangid, 1, p->nIndex); + while( rc==SQLITE_OK && sqlite3_step(pAllLangid)==SQLITE_ROW ){ + int iLangid = sqlite3_column_int(pAllLangid, 0); + int i; + for(i=0; inIndex; i++){ + cksum1 = cksum1 ^ fts3ChecksumIndex(p, iLangid, i, &rc); + } + } + rc2 = sqlite3_reset(pAllLangid); + if( rc==SQLITE_OK ) rc = rc2; } - for(i=0; inColumn+1; i++){ - u32 x = a[i+1]; - if( x+aSzIns[i] < aSzDel[i] ){ - x = 0; + + /* This block calculates the checksum according to the %_content table */ + rc = fts3SqlStmt(p, SQL_SELECT_ALL_LANGID, &pAllLangid, 0); + if( rc==SQLITE_OK ){ + sqlite3_tokenizer_module const *pModule = p->pTokenizer->pModule; + sqlite3_stmt *pStmt = 0; + char *zSql; + + zSql = sqlite3_mprintf("SELECT %s" , p->zReadExprlist); + if( !zSql ){ + rc = SQLITE_NOMEM; }else{ - x = x + aSzIns[i] - aSzDel[i]; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); } - a[i+1] = x; - } - fts3EncodeIntArray(nStat, a, pBlob, &nBlob); - rc = fts3SqlStmt(p, SQL_REPLACE_DOCTOTAL, &pStmt, 0); - if( rc ){ - sqlite3_free(a); - *pRC = rc; - return; - } - sqlite3_bind_blob(pStmt, 1, pBlob, nBlob, SQLITE_STATIC); - sqlite3_step(pStmt); - *pRC = sqlite3_reset(pStmt); - sqlite3_free(a); -} -static int fts3DoOptimize(Fts3Table *p, int bReturnDone){ - int i; - int bSeenDone = 0; - int rc = SQLITE_OK; - for(i=0; rc==SQLITE_OK && inIndex; i++){ - rc = fts3SegmentMerge(p, i, FTS3_SEGCURSOR_ALL); - if( rc==SQLITE_DONE ){ - bSeenDone = 1; - rc = SQLITE_OK; + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){ + i64 iDocid = sqlite3_column_int64(pStmt, 0); + int iLang = langidFromSelect(p, pStmt); + int iCol; + + for(iCol=0; rc==SQLITE_OK && iColnColumn; iCol++){ + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pStmt, iCol+1); + int nText = sqlite3_column_bytes(pStmt, iCol+1); + sqlite3_tokenizer_cursor *pT = 0; + + rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText,&pT); + while( rc==SQLITE_OK ){ + char const *zToken; /* Buffer containing token */ + int nToken = 0; /* Number of bytes in token */ + int iDum1 = 0, iDum2 = 0; /* Dummy variables */ + int iPos = 0; /* Position of token in zText */ + + rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos); + if( rc==SQLITE_OK ){ + int i; + cksum2 = cksum2 ^ fts3ChecksumEntry( + zToken, nToken, iLang, 0, iDocid, iCol, iPos + ); + for(i=1; inIndex; i++){ + if( p->aIndex[i].nPrefix<=nToken ){ + cksum2 = cksum2 ^ fts3ChecksumEntry( + zToken, p->aIndex[i].nPrefix, iLang, i, iDocid, iCol, iPos + ); + } + } + } + } + if( pT ) pModule->xClose(pT); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + } + } } + + sqlite3_finalize(pStmt); } - sqlite3Fts3SegmentsClose(p); - sqlite3Fts3PendingTermsClear(p); - return (rc==SQLITE_OK && bReturnDone && bSeenDone) ? SQLITE_DONE : rc; + *pbOk = (cksum1==cksum2); + return rc; +} + +/* +** Run the integrity-check. If no error occurs and the current contents of +** the FTS index are correct, return SQLITE_OK. Or, if the contents of the +** FTS index are incorrect, return SQLITE_CORRUPT_VTAB. +** +** Or, if an error (e.g. an OOM or IO error) occurs, return an SQLite +** error code. +** +** The integrity-check works as follows. For each token and indexed token +** prefix in the document set, a 64-bit checksum is calculated (by code +** in fts3ChecksumEntry()) based on the following: +** +** + The index number (0 for the main index, 1 for the first prefix +** index etc.), +** + The token (or token prefix) text itself, +** + The language-id of the row it appears in, +** + The docid of the row it appears in, +** + The column it appears in, and +** + The tokens position within that column. +** +** The checksums for all entries in the index are XORed together to create +** a single checksum for the entire index. +** +** The integrity-check code calculates the same checksum in two ways: +** +** 1. By scanning the contents of the FTS index, and +** 2. By scanning and tokenizing the content table. +** +** If the two checksums are identical, the integrity-check is deemed to have +** passed. +*/ +static int fts3DoIntegrityCheck( + Fts3Table *p /* FTS3 table handle */ +){ + int rc; + int bOk = 0; + rc = fts3IntegrityCheck(p, &bOk); + if( rc==SQLITE_OK && bOk==0 ) rc = SQLITE_CORRUPT_VTAB; + return rc; } /* @@ -122540,6 +144795,14 @@ static int fts3SpecialInsert(Fts3Table *p, sqlite3_value *pVal){ return SQLITE_NOMEM; }else if( nVal==8 && 0==sqlite3_strnicmp(zVal, "optimize", 8) ){ rc = fts3DoOptimize(p, 0); + }else if( nVal==7 && 0==sqlite3_strnicmp(zVal, "rebuild", 7) ){ + rc = fts3DoRebuild(p); + }else if( nVal==15 && 0==sqlite3_strnicmp(zVal, "integrity-check", 15) ){ + rc = fts3DoIntegrityCheck(p); + }else if( nVal>6 && 0==sqlite3_strnicmp(zVal, "merge=", 6) ){ + rc = fts3DoIncrmerge(p, &zVal[6]); + }else if( nVal>10 && 0==sqlite3_strnicmp(zVal, "automerge=", 10) ){ + rc = fts3DoAutoincrmerge(p, &zVal[10]); #ifdef SQLITE_TEST }else if( nVal>9 && 0==sqlite3_strnicmp(zVal, "nodesize=", 9) ){ p->nNodeSize = atoi(&zVal[9]); @@ -122547,6 +144810,9 @@ static int fts3SpecialInsert(Fts3Table *p, sqlite3_value *pVal){ }else if( nVal>11 && 0==sqlite3_strnicmp(zVal, "maxpending=", 9) ){ p->nMaxPendingData = atoi(&zVal[11]); rc = SQLITE_OK; + }else if( nVal>21 && 0==sqlite3_strnicmp(zVal, "test-no-incr-doclist=", 21) ){ + p->bNoIncrDoclist = atoi(&zVal[21]); + rc = SQLITE_OK; #endif }else{ rc = SQLITE_ERROR; @@ -122555,6 +144821,7 @@ static int fts3SpecialInsert(Fts3Table *p, sqlite3_value *pVal){ return rc; } +#ifndef SQLITE_DISABLE_FTS4_DEFERRED /* ** Delete all cached deferred doclists. Deferred doclists are cached ** (allocated) by the sqlite3Fts3CacheDeferredDoclists() function. @@ -122605,32 +144872,34 @@ SQLITE_PRIVATE int sqlite3Fts3CacheDeferredDoclists(Fts3Cursor *pCsr){ iDocid = sqlite3_column_int64(pCsr->pStmt, 0); for(i=0; inColumn && rc==SQLITE_OK; i++){ - const char *zText = (const char *)sqlite3_column_text(pCsr->pStmt, i+1); - sqlite3_tokenizer_cursor *pTC = 0; - - rc = pModule->xOpen(pT, zText, -1, &pTC); - while( rc==SQLITE_OK ){ - char const *zToken; /* Buffer containing token */ - int nToken; /* Number of bytes in token */ - int iDum1, iDum2; /* Dummy variables */ - int iPos; /* Position of token in zText */ - - pTC->pTokenizer = pT; - rc = pModule->xNext(pTC, &zToken, &nToken, &iDum1, &iDum2, &iPos); - for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ - Fts3PhraseToken *pPT = pDef->pToken; - if( (pDef->iCol>=p->nColumn || pDef->iCol==i) - && (pPT->n==nToken || (pPT->isPrefix && pPT->nz, pPT->n)) - ){ - fts3PendingListAppend(&pDef->pList, iDocid, i, iPos, &rc); + if( p->abNotindexed[i]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pCsr->pStmt, i+1); + sqlite3_tokenizer_cursor *pTC = 0; + + rc = sqlite3Fts3OpenTokenizer(pT, pCsr->iLangid, zText, -1, &pTC); + while( rc==SQLITE_OK ){ + char const *zToken; /* Buffer containing token */ + int nToken = 0; /* Number of bytes in token */ + int iDum1 = 0, iDum2 = 0; /* Dummy variables */ + int iPos = 0; /* Position of token in zText */ + + rc = pModule->xNext(pTC, &zToken, &nToken, &iDum1, &iDum2, &iPos); + for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ + Fts3PhraseToken *pPT = pDef->pToken; + if( (pDef->iCol>=p->nColumn || pDef->iCol==i) + && (pPT->bFirst==0 || iPos==0) + && (pPT->n==nToken || (pPT->isPrefix && pPT->nz, pPT->n)) + ){ + fts3PendingListAppend(&pDef->pList, iDocid, i, iPos, &rc); + } } } + if( pTC ) pModule->xClose(pTC); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - if( pTC ) pModule->xClose(pTC); - if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - + for(pDef=pCsr->pDeferred; pDef && rc==SQLITE_OK; pDef=pDef->pNext){ if( pDef->pList ){ rc = fts3PendingListAppendVarint(&pDef->pList, 0); @@ -122692,6 +144961,7 @@ SQLITE_PRIVATE int sqlite3Fts3DeferToken( return SQLITE_OK; } +#endif /* ** SQLite value pRowid contains the rowid of a row that may or may not be @@ -122701,26 +144971,32 @@ SQLITE_PRIVATE int sqlite3Fts3DeferToken( static int fts3DeleteByRowid( Fts3Table *p, sqlite3_value *pRowid, - int *pnDoc, + int *pnChng, /* IN/OUT: Decrement if row is deleted */ u32 *aSzDel ){ - int isEmpty = 0; - int rc = fts3IsEmpty(p, pRowid, &isEmpty); - if( rc==SQLITE_OK ){ - if( isEmpty ){ - /* Deleting this row means the whole table is empty. In this case - ** delete the contents of all three tables and throw away any - ** data in the pendingTerms hash table. */ - rc = fts3DeleteAll(p); - *pnDoc = *pnDoc - 1; - }else{ - sqlite3_int64 iRemove = sqlite3_value_int64(pRowid); - rc = fts3PendingTermsDocid(p, iRemove); - fts3DeleteTerms(&rc, p, pRowid, aSzDel); - fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid); - if( sqlite3_changes(p->db) ) *pnDoc = *pnDoc - 1; - if( p->bHasDocsize ){ - fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid); + int rc = SQLITE_OK; /* Return code */ + int bFound = 0; /* True if *pRowid really is in the table */ + + fts3DeleteTerms(&rc, p, pRowid, aSzDel, &bFound); + if( bFound && rc==SQLITE_OK ){ + int isEmpty = 0; /* Deleting *pRowid leaves the table empty */ + rc = fts3IsEmpty(p, pRowid, &isEmpty); + if( rc==SQLITE_OK ){ + if( isEmpty ){ + /* Deleting this row means the whole table is empty. In this case + ** delete the contents of all three tables and throw away any + ** data in the pendingTerms hash table. */ + rc = fts3DeleteAll(p, 1); + *pnChng = 0; + memset(aSzDel, 0, sizeof(u32) * (p->nColumn+1) * 2); + }else{ + *pnChng = *pnChng - 1; + if( p->zContentTbl==0 ){ + fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid); + } + if( p->bHasDocsize ){ + fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid); + } } } } @@ -122730,7 +145006,16 @@ static int fts3DeleteByRowid( /* ** This function does the work for the xUpdate method of FTS3 virtual -** tables. +** tables. The schema of the virtual table being: +** +** CREATE TABLE
( +** , +**
HIDDEN, +** docid HIDDEN, +** HIDDEN +** ); +** +** */ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( sqlite3_vtab *pVtab, /* FTS3 vtab object */ @@ -122741,13 +145026,20 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( Fts3Table *p = (Fts3Table *)pVtab; int rc = SQLITE_OK; /* Return Code */ int isRemove = 0; /* True for an UPDATE or DELETE */ - sqlite3_int64 iRemove = 0; /* Rowid removed by UPDATE or DELETE */ u32 *aSzIns = 0; /* Sizes of inserted documents */ - u32 *aSzDel; /* Sizes of deleted documents */ + u32 *aSzDel = 0; /* Sizes of deleted documents */ int nChng = 0; /* Net change in number of documents */ int bInsertDone = 0; + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + assert( p->bHasStat==0 || p->bHasStat==1 ); + assert( p->pSegments==0 ); + assert( + nArg==1 /* DELETE operations */ + || nArg==(2 + p->nColumn + 3) /* INSERT or UPDATE operations */ + ); /* Check for a "special" INSERT operation. One of the form: ** @@ -122761,14 +145053,22 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( goto update_out; } + if( nArg>1 && sqlite3_value_int(apVal[2 + p->nColumn + 2])<0 ){ + rc = SQLITE_CONSTRAINT; + goto update_out; + } + /* Allocate space to hold the change in document sizes */ - aSzIns = sqlite3_malloc( sizeof(aSzIns[0])*(p->nColumn+1)*2 ); - if( aSzIns==0 ){ + aSzDel = sqlite3_malloc( sizeof(aSzDel[0])*(p->nColumn+1)*2 ); + if( aSzDel==0 ){ rc = SQLITE_NOMEM; goto update_out; } - aSzDel = &aSzIns[p->nColumn+1]; - memset(aSzIns, 0, sizeof(aSzIns[0])*(p->nColumn+1)*2); + aSzIns = &aSzDel[p->nColumn+1]; + memset(aSzDel, 0, sizeof(aSzDel[0])*(p->nColumn+1)*2); + + rc = fts3Writelock(p); + if( rc!=SQLITE_OK ) goto update_out; /* If this is an INSERT operation, or an UPDATE that modifies the rowid ** value, then this operation requires constraint handling. @@ -122779,7 +145079,7 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( ** detect the conflict and return SQLITE_CONSTRAINT before beginning to ** modify the database file. */ - if( nArg>1 ){ + if( nArg>1 && p->zContentTbl==0 ){ /* Find the value object that holds the new rowid value. */ sqlite3_value *pNewRowid = apVal[3+p->nColumn]; if( sqlite3_value_type(pNewRowid)==SQLITE_NULL ){ @@ -122824,20 +145124,23 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( assert( sqlite3_value_type(apVal[0])==SQLITE_INTEGER ); rc = fts3DeleteByRowid(p, apVal[0], &nChng, aSzDel); isRemove = 1; - iRemove = sqlite3_value_int64(apVal[0]); } /* If this is an INSERT or UPDATE operation, insert the new record. */ if( nArg>1 && rc==SQLITE_OK ){ + int iLangid = sqlite3_value_int(apVal[2 + p->nColumn + 2]); if( bInsertDone==0 ){ rc = fts3InsertData(p, apVal, pRowid); - if( rc==SQLITE_CONSTRAINT ) rc = SQLITE_CORRUPT_VTAB; + if( rc==SQLITE_CONSTRAINT && p->zContentTbl==0 ){ + rc = FTS_CORRUPT_VTAB; + } } - if( rc==SQLITE_OK && (!isRemove || *pRowid!=iRemove) ){ - rc = fts3PendingTermsDocid(p, *pRowid); + if( rc==SQLITE_OK && (!isRemove || *pRowid!=p->iPrevDocid ) ){ + rc = fts3PendingTermsDocid(p, iLangid, *pRowid); } if( rc==SQLITE_OK ){ - rc = fts3InsertTerms(p, apVal, aSzIns); + assert( p->iPrevDocid==*pRowid ); + rc = fts3InsertTerms(p, iLangid, apVal, aSzIns); } if( p->bHasDocsize ){ fts3InsertDocsize(&rc, p, aSzIns); @@ -122845,12 +145148,12 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( nChng++; } - if( p->bHasStat ){ + if( p->bFts4 ){ fts3UpdateDocTotals(&rc, p, aSzIns, aSzDel, nChng); } update_out: - sqlite3_free(aSzIns); + sqlite3_free(aSzDel); sqlite3Fts3SegmentsClose(p); return rc; } @@ -122896,6 +145199,8 @@ SQLITE_PRIVATE int sqlite3Fts3Optimize(Fts3Table *p){ #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) +/* #include */ +/* #include */ /* ** Characters that may appear in the second argument to matchinfo(). @@ -123008,7 +145313,7 @@ struct StrBuffer { */ static void fts3GetDeltaPosition(char **pp, int *piPos){ int iVal; - *pp += sqlite3Fts3GetVarint32(*pp, &iVal); + *pp += fts3GetVarint32(*pp, &iVal); *piPos += (iVal-2); } @@ -123240,23 +145545,27 @@ static int fts3SnippetFindPositions(Fts3Expr *pExpr, int iPhrase, void *ctx){ SnippetIter *p = (SnippetIter *)ctx; SnippetPhrase *pPhrase = &p->aPhrase[iPhrase]; char *pCsr; + int rc; pPhrase->nToken = pExpr->pPhrase->nToken; - - pCsr = sqlite3Fts3EvalPhrasePoslist(p->pCsr, pExpr, p->iCol); + rc = sqlite3Fts3EvalPhrasePoslist(p->pCsr, pExpr, p->iCol, &pCsr); + assert( rc==SQLITE_OK || pCsr==0 ); if( pCsr ){ int iFirst = 0; pPhrase->pList = pCsr; fts3GetDeltaPosition(&pCsr, &iFirst); + assert( iFirst>=0 ); pPhrase->pHead = pCsr; pPhrase->pTail = pCsr; pPhrase->iHead = iFirst; pPhrase->iTail = iFirst; }else{ - assert( pPhrase->pList==0 && pPhrase->pHead==0 && pPhrase->pTail==0 ); + assert( rc!=SQLITE_OK || ( + pPhrase->pList==0 && pPhrase->pHead==0 && pPhrase->pTail==0 + )); } - return SQLITE_OK; + return rc; } /* @@ -123265,9 +145574,9 @@ static int fts3SnippetFindPositions(Fts3Expr *pExpr, int iPhrase, void *ctx){ ** is the snippet with the highest score, where scores are calculated ** by adding: ** -** (a) +1 point for each occurence of a matchable phrase in the snippet. +** (a) +1 point for each occurrence of a matchable phrase in the snippet. ** -** (b) +1000 points for the first occurence of each matchable phrase in +** (b) +1000 points for the first occurrence of each matchable phrase in ** the snippet for which the corresponding mCovered bit is not set. ** ** The selected snippet parameters are stored in structure *pFragment before @@ -123380,6 +145689,7 @@ static int fts3StringAppend( pStr->z = zNew; pStr->nAlloc = nAlloc; } + assert( pStr->z!=0 && (pStr->nAlloc >= pStr->n+nAppend+1) ); /* Append the data to the string buffer. */ memcpy(&pStr->z[pStr->n], zAppend, nAppend); @@ -123411,6 +145721,7 @@ static int fts3StringAppend( */ static int fts3SnippetShift( Fts3Table *pTab, /* FTS3 table snippet comes from */ + int iLangid, /* Language id to use in tokenizing */ int nSnippet, /* Number of tokens desired for snippet */ const char *zDoc, /* Document text to extract snippet from */ int nDoc, /* Size of buffer zDoc in bytes */ @@ -123446,13 +145757,12 @@ static int fts3SnippetShift( /* Open a cursor on zDoc/nDoc. Check if there are (nSnippet+nDesired) ** or more tokens in zDoc/nDoc. */ - rc = pMod->xOpen(pTab->pTokenizer, zDoc, nDoc, &pC); + rc = sqlite3Fts3OpenTokenizer(pTab->pTokenizer, iLangid, zDoc, nDoc, &pC); if( rc!=SQLITE_OK ){ return rc; } - pC->pTokenizer = pTab->pTokenizer; while( rc==SQLITE_OK && iCurrent<(nSnippet+nDesired) ){ - const char *ZDUMMY; int DUMMY1, DUMMY2, DUMMY3; + const char *ZDUMMY; int DUMMY1 = 0, DUMMY2 = 0, DUMMY3 = 0; rc = pMod->xNext(pC, &ZDUMMY, &DUMMY1, &DUMMY2, &DUMMY3, &iCurrent); } pMod->xClose(pC); @@ -123496,8 +145806,6 @@ static int fts3SnippetText( int iCol = pFragment->iCol+1; /* Query column to extract text from */ sqlite3_tokenizer_module *pMod; /* Tokenizer module methods object */ sqlite3_tokenizer_cursor *pC; /* Tokenizer cursor open on zDoc/nDoc */ - const char *ZDUMMY; /* Dummy argument used with tokenizer */ - int DUMMY1; /* Dummy argument used with tokenizer */ zDoc = (const char *)sqlite3_column_text(pCsr->pStmt, iCol); if( zDoc==0 ){ @@ -123510,17 +145818,29 @@ static int fts3SnippetText( /* Open a token cursor on the document. */ pMod = (sqlite3_tokenizer_module *)pTab->pTokenizer->pModule; - rc = pMod->xOpen(pTab->pTokenizer, zDoc, nDoc, &pC); + rc = sqlite3Fts3OpenTokenizer(pTab->pTokenizer, pCsr->iLangid, zDoc,nDoc,&pC); if( rc!=SQLITE_OK ){ return rc; } - pC->pTokenizer = pTab->pTokenizer; while( rc==SQLITE_OK ){ - int iBegin; /* Offset in zDoc of start of token */ - int iFin; /* Offset in zDoc of end of token */ - int isHighlight; /* True for highlighted terms */ - + const char *ZDUMMY; /* Dummy argument used with tokenizer */ + int DUMMY1 = -1; /* Dummy argument used with tokenizer */ + int iBegin = 0; /* Offset in zDoc of start of token */ + int iFin = 0; /* Offset in zDoc of end of token */ + int isHighlight = 0; /* True for highlighted terms */ + + /* Variable DUMMY1 is initialized to a negative value above. Elsewhere + ** in the FTS code the variable that the third argument to xNext points to + ** is initialized to zero before the first (*but not necessarily + ** subsequent*) call to xNext(). This is done for a particular application + ** that needs to know whether or not the tokenizer is being used for + ** snippet generation or for some other purpose. + ** + ** Extreme care is required when writing code to depend on this + ** initialization. It is not a documented part of the tokenizer interface. + ** If a tokenizer is used directly by any code outside of FTS, this + ** convention might not be respected. */ rc = pMod->xNext(pC, &ZDUMMY, &DUMMY1, &iBegin, &iFin, &iCurrent); if( rc!=SQLITE_OK ){ if( rc==SQLITE_DONE ){ @@ -123536,7 +145856,9 @@ static int fts3SnippetText( if( !isShiftDone ){ int n = nDoc - iBegin; - rc = fts3SnippetShift(pTab, nSnippet, &zDoc[iBegin], n, &iPos, &hlmask); + rc = fts3SnippetShift( + pTab, pCsr->iLangid, nSnippet, &zDoc[iBegin], n, &iPos, &hlmask + ); isShiftDone = 1; /* Now that the shift has been done, check if the initial "..." are @@ -123648,13 +145970,14 @@ static int fts3ExprLocalHitsCb( int iPhrase, /* Phrase number */ void *pCtx /* Pointer to MatchInfo structure */ ){ + int rc = SQLITE_OK; MatchInfo *p = (MatchInfo *)pCtx; int iStart = iPhrase * p->nCol * 3; int i; - for(i=0; inCol; i++){ + for(i=0; inCol && rc==SQLITE_OK; i++){ char *pCsr; - pCsr = sqlite3Fts3EvalPhrasePoslist(p->pCursor, pExpr, i); + rc = sqlite3Fts3EvalPhrasePoslist(p->pCursor, pExpr, i, &pCsr); if( pCsr ){ p->aMatchinfo[iStart+i*3] = fts3ColumnlistCount(&pCsr); }else{ @@ -123662,7 +145985,7 @@ static int fts3ExprLocalHitsCb( } } - return SQLITE_OK; + return rc; } static int fts3MatchinfoCheck( @@ -123672,8 +145995,8 @@ static int fts3MatchinfoCheck( ){ if( (cArg==FTS3_MATCHINFO_NPHRASE) || (cArg==FTS3_MATCHINFO_NCOL) - || (cArg==FTS3_MATCHINFO_NDOC && pTab->bHasStat) - || (cArg==FTS3_MATCHINFO_AVGLENGTH && pTab->bHasStat) + || (cArg==FTS3_MATCHINFO_NDOC && pTab->bFts4) + || (cArg==FTS3_MATCHINFO_AVGLENGTH && pTab->bFts4) || (cArg==FTS3_MATCHINFO_LENGTH && pTab->bHasDocsize) || (cArg==FTS3_MATCHINFO_LCS) || (cArg==FTS3_MATCHINFO_HITS) @@ -123728,7 +146051,7 @@ static int fts3MatchinfoSelectDoctotal( a = sqlite3_column_blob(pStmt, 0); a += sqlite3Fts3GetVarint(a, &nDoc); - if( nDoc==0 ) return SQLITE_CORRUPT_VTAB; + if( nDoc==0 ) return FTS_CORRUPT_VTAB; *pnDoc = (u32)nDoc; if( paLen ) *paLen = a; @@ -123823,8 +146146,10 @@ static int fts3MatchinfoLcs(Fts3Cursor *pCsr, MatchInfo *pInfo){ int nLive = 0; /* Number of iterators in aIter not at EOF */ for(i=0; inPhrase; i++){ + int rc; LcsIterator *pIt = &aIter[i]; - pIt->pRead = sqlite3Fts3EvalPhrasePoslist(pCsr, pIt->pExpr, iCol); + rc = sqlite3Fts3EvalPhrasePoslist(pCsr, pIt->pExpr, iCol, &pIt->pRead); + if( rc!=SQLITE_OK ) return rc; if( pIt->pRead ){ pIt->iPos = pIt->iPosOffset; fts3LcsIteratorAdvance(&aIter[i]); @@ -124176,9 +146501,10 @@ static int fts3ExprTermOffsetInit(Fts3Expr *pExpr, int iPhrase, void *ctx){ int iTerm; /* For looping through nTerm phrase terms */ char *pList; /* Pointer to position list for phrase */ int iPos = 0; /* First position in position-list */ + int rc; UNUSED_PARAMETER(iPhrase); - pList = sqlite3Fts3EvalPhrasePoslist(p->pCsr, pExpr, p->iCol); + rc = sqlite3Fts3EvalPhrasePoslist(p->pCsr, pExpr, p->iCol, &pList); nTerm = pExpr->pPhrase->nToken; if( pList ){ fts3GetDeltaPosition(&pList, &iPos); @@ -124192,7 +146518,7 @@ static int fts3ExprTermOffsetInit(Fts3Expr *pExpr, int iPhrase, void *ctx){ pT->iPos = iPos; } - return SQLITE_OK; + return rc; } /* @@ -124204,8 +146530,6 @@ SQLITE_PRIVATE void sqlite3Fts3Offsets( ){ Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab; sqlite3_tokenizer_module const *pMod = pTab->pTokenizer->pModule; - const char *ZDUMMY; /* Dummy argument used with xNext() */ - int NDUMMY; /* Dummy argument used with xNext() */ int rc; /* Return Code */ int nToken; /* Number of tokens in query */ int iCol; /* Column currently being processed */ @@ -124238,9 +146562,11 @@ SQLITE_PRIVATE void sqlite3Fts3Offsets( */ for(iCol=0; iColnColumn; iCol++){ sqlite3_tokenizer_cursor *pC; /* Tokenizer cursor */ - int iStart; - int iEnd; - int iCurrent; + const char *ZDUMMY; /* Dummy argument used with xNext() */ + int NDUMMY = 0; /* Dummy argument used with xNext() */ + int iStart = 0; + int iEnd = 0; + int iCurrent = 0; const char *zDoc; int nDoc; @@ -124269,9 +146595,10 @@ SQLITE_PRIVATE void sqlite3Fts3Offsets( } /* Initialize a tokenizer iterator to iterate through column iCol. */ - rc = pMod->xOpen(pTab->pTokenizer, zDoc, nDoc, &pC); + rc = sqlite3Fts3OpenTokenizer(pTab->pTokenizer, pCsr->iLangid, + zDoc, nDoc, &pC + ); if( rc!=SQLITE_OK ) goto offsets_out; - pC->pTokenizer = pTab->pTokenizer; rc = pMod->xNext(pC, &ZDUMMY, &NDUMMY, &iStart, &iEnd, &iCurrent); while( rc==SQLITE_OK ){ @@ -124289,7 +146616,7 @@ SQLITE_PRIVATE void sqlite3Fts3Offsets( if( !pTerm ){ /* All offsets for this column have been gathered. */ - break; + rc = SQLITE_DONE; }else{ assert( iCurrent<=iMinPos ); if( 0==(0xFE&*pTerm->pList) ){ @@ -124306,8 +146633,8 @@ SQLITE_PRIVATE void sqlite3Fts3Offsets( "%d %d %d %d ", iCol, pTerm-sCtx.aTerm, iStart, iEnd-iStart ); rc = fts3StringAppend(&res, aBuffer, -1); - }else if( rc==SQLITE_DONE ){ - rc = SQLITE_CORRUPT_VTAB; + }else if( rc==SQLITE_DONE && pTab->zContentTbl==0 ){ + rc = FTS_CORRUPT_VTAB; } } } @@ -124379,6 +146706,768 @@ SQLITE_PRIVATE void sqlite3Fts3Matchinfo( #endif /************** End of fts3_snippet.c ****************************************/ +/************** Begin file fts3_unicode.c ************************************/ +/* +** 2012 May 24 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** Implementation of the "unicode" full-text-search tokenizer. +*/ + +#ifndef SQLITE_DISABLE_FTS3_UNICODE + +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) + +/* #include */ +/* #include */ +/* #include */ +/* #include */ + + +/* +** The following two macros - READ_UTF8 and WRITE_UTF8 - have been copied +** from the sqlite3 source file utf.c. If this file is compiled as part +** of the amalgamation, they are not required. +*/ +#ifndef SQLITE_AMALGAMATION + +static const unsigned char sqlite3Utf8Trans1[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00, +}; + +#define READ_UTF8(zIn, zTerm, c) \ + c = *(zIn++); \ + if( c>=0xc0 ){ \ + c = sqlite3Utf8Trans1[c-0xc0]; \ + while( zIn!=zTerm && (*zIn & 0xc0)==0x80 ){ \ + c = (c<<6) + (0x3f & *(zIn++)); \ + } \ + if( c<0x80 \ + || (c&0xFFFFF800)==0xD800 \ + || (c&0xFFFFFFFE)==0xFFFE ){ c = 0xFFFD; } \ + } + +#define WRITE_UTF8(zOut, c) { \ + if( c<0x00080 ){ \ + *zOut++ = (u8)(c&0xFF); \ + } \ + else if( c<0x00800 ){ \ + *zOut++ = 0xC0 + (u8)((c>>6)&0x1F); \ + *zOut++ = 0x80 + (u8)(c & 0x3F); \ + } \ + else if( c<0x10000 ){ \ + *zOut++ = 0xE0 + (u8)((c>>12)&0x0F); \ + *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); \ + *zOut++ = 0x80 + (u8)(c & 0x3F); \ + }else{ \ + *zOut++ = 0xF0 + (u8)((c>>18) & 0x07); \ + *zOut++ = 0x80 + (u8)((c>>12) & 0x3F); \ + *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); \ + *zOut++ = 0x80 + (u8)(c & 0x3F); \ + } \ +} + +#endif /* ifndef SQLITE_AMALGAMATION */ + +typedef struct unicode_tokenizer unicode_tokenizer; +typedef struct unicode_cursor unicode_cursor; + +struct unicode_tokenizer { + sqlite3_tokenizer base; + int bRemoveDiacritic; + int nException; + int *aiException; +}; + +struct unicode_cursor { + sqlite3_tokenizer_cursor base; + const unsigned char *aInput; /* Input text being tokenized */ + int nInput; /* Size of aInput[] in bytes */ + int iOff; /* Current offset within aInput[] */ + int iToken; /* Index of next token to be returned */ + char *zToken; /* storage for current token */ + int nAlloc; /* space allocated at zToken */ +}; + + +/* +** Destroy a tokenizer allocated by unicodeCreate(). +*/ +static int unicodeDestroy(sqlite3_tokenizer *pTokenizer){ + if( pTokenizer ){ + unicode_tokenizer *p = (unicode_tokenizer *)pTokenizer; + sqlite3_free(p->aiException); + sqlite3_free(p); + } + return SQLITE_OK; +} + +/* +** As part of a tokenchars= or separators= option, the CREATE VIRTUAL TABLE +** statement has specified that the tokenizer for this table shall consider +** all characters in string zIn/nIn to be separators (if bAlnum==0) or +** token characters (if bAlnum==1). +** +** For each codepoint in the zIn/nIn string, this function checks if the +** sqlite3FtsUnicodeIsalnum() function already returns the desired result. +** If so, no action is taken. Otherwise, the codepoint is added to the +** unicode_tokenizer.aiException[] array. For the purposes of tokenization, +** the return value of sqlite3FtsUnicodeIsalnum() is inverted for all +** codepoints in the aiException[] array. +** +** If a standalone diacritic mark (one that sqlite3FtsUnicodeIsdiacritic() +** identifies as a diacritic) occurs in the zIn/nIn string it is ignored. +** It is not possible to change the behavior of the tokenizer with respect +** to these codepoints. +*/ +static int unicodeAddExceptions( + unicode_tokenizer *p, /* Tokenizer to add exceptions to */ + int bAlnum, /* Replace Isalnum() return value with this */ + const char *zIn, /* Array of characters to make exceptions */ + int nIn /* Length of z in bytes */ +){ + const unsigned char *z = (const unsigned char *)zIn; + const unsigned char *zTerm = &z[nIn]; + int iCode; + int nEntry = 0; + + assert( bAlnum==0 || bAlnum==1 ); + + while( zaiException, (p->nException+nEntry)*sizeof(int)); + if( aNew==0 ) return SQLITE_NOMEM; + nNew = p->nException; + + z = (const unsigned char *)zIn; + while( zi; j--) aNew[j] = aNew[j-1]; + aNew[i] = iCode; + nNew++; + } + } + p->aiException = aNew; + p->nException = nNew; + } + + return SQLITE_OK; +} + +/* +** Return true if the p->aiException[] array contains the value iCode. +*/ +static int unicodeIsException(unicode_tokenizer *p, int iCode){ + if( p->nException>0 ){ + int *a = p->aiException; + int iLo = 0; + int iHi = p->nException-1; + + while( iHi>=iLo ){ + int iTest = (iHi + iLo) / 2; + if( iCode==a[iTest] ){ + return 1; + }else if( iCode>a[iTest] ){ + iLo = iTest+1; + }else{ + iHi = iTest-1; + } + } + } + + return 0; +} + +/* +** Return true if, for the purposes of tokenization, codepoint iCode is +** considered a token character (not a separator). +*/ +static int unicodeIsAlnum(unicode_tokenizer *p, int iCode){ + assert( (sqlite3FtsUnicodeIsalnum(iCode) & 0xFFFFFFFE)==0 ); + return sqlite3FtsUnicodeIsalnum(iCode) ^ unicodeIsException(p, iCode); +} + +/* +** Create a new tokenizer instance. +*/ +static int unicodeCreate( + int nArg, /* Size of array argv[] */ + const char * const *azArg, /* Tokenizer creation arguments */ + sqlite3_tokenizer **pp /* OUT: New tokenizer handle */ +){ + unicode_tokenizer *pNew; /* New tokenizer object */ + int i; + int rc = SQLITE_OK; + + pNew = (unicode_tokenizer *) sqlite3_malloc(sizeof(unicode_tokenizer)); + if( pNew==NULL ) return SQLITE_NOMEM; + memset(pNew, 0, sizeof(unicode_tokenizer)); + pNew->bRemoveDiacritic = 1; + + for(i=0; rc==SQLITE_OK && ibRemoveDiacritic = 1; + } + else if( n==19 && memcmp("remove_diacritics=0", z, 19)==0 ){ + pNew->bRemoveDiacritic = 0; + } + else if( n>=11 && memcmp("tokenchars=", z, 11)==0 ){ + rc = unicodeAddExceptions(pNew, 1, &z[11], n-11); + } + else if( n>=11 && memcmp("separators=", z, 11)==0 ){ + rc = unicodeAddExceptions(pNew, 0, &z[11], n-11); + } + else{ + /* Unrecognized argument */ + rc = SQLITE_ERROR; + } + } + + if( rc!=SQLITE_OK ){ + unicodeDestroy((sqlite3_tokenizer *)pNew); + pNew = 0; + } + *pp = (sqlite3_tokenizer *)pNew; + return rc; +} + +/* +** Prepare to begin tokenizing a particular string. The input +** string to be tokenized is pInput[0..nBytes-1]. A cursor +** used to incrementally tokenize this string is returned in +** *ppCursor. +*/ +static int unicodeOpen( + sqlite3_tokenizer *p, /* The tokenizer */ + const char *aInput, /* Input string */ + int nInput, /* Size of string aInput in bytes */ + sqlite3_tokenizer_cursor **pp /* OUT: New cursor object */ +){ + unicode_cursor *pCsr; + + pCsr = (unicode_cursor *)sqlite3_malloc(sizeof(unicode_cursor)); + if( pCsr==0 ){ + return SQLITE_NOMEM; + } + memset(pCsr, 0, sizeof(unicode_cursor)); + + pCsr->aInput = (const unsigned char *)aInput; + if( aInput==0 ){ + pCsr->nInput = 0; + }else if( nInput<0 ){ + pCsr->nInput = (int)strlen(aInput); + }else{ + pCsr->nInput = nInput; + } + + *pp = &pCsr->base; + UNUSED_PARAMETER(p); + return SQLITE_OK; +} + +/* +** Close a tokenization cursor previously opened by a call to +** simpleOpen() above. +*/ +static int unicodeClose(sqlite3_tokenizer_cursor *pCursor){ + unicode_cursor *pCsr = (unicode_cursor *) pCursor; + sqlite3_free(pCsr->zToken); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** Extract the next token from a tokenization cursor. The cursor must +** have been opened by a prior call to simpleOpen(). +*/ +static int unicodeNext( + sqlite3_tokenizer_cursor *pC, /* Cursor returned by simpleOpen */ + const char **paToken, /* OUT: Token text */ + int *pnToken, /* OUT: Number of bytes at *paToken */ + int *piStart, /* OUT: Starting offset of token */ + int *piEnd, /* OUT: Ending offset of token */ + int *piPos /* OUT: Position integer of token */ +){ + unicode_cursor *pCsr = (unicode_cursor *)pC; + unicode_tokenizer *p = ((unicode_tokenizer *)pCsr->base.pTokenizer); + int iCode = 0; + char *zOut; + const unsigned char *z = &pCsr->aInput[pCsr->iOff]; + const unsigned char *zStart = z; + const unsigned char *zEnd; + const unsigned char *zTerm = &pCsr->aInput[pCsr->nInput]; + + /* Scan past any delimiter characters before the start of the next token. + ** Return SQLITE_DONE early if this takes us all the way to the end of + ** the input. */ + while( z=zTerm ) return SQLITE_DONE; + + zOut = pCsr->zToken; + do { + int iOut; + + /* Grow the output buffer if required. */ + if( (zOut-pCsr->zToken)>=(pCsr->nAlloc-4) ){ + char *zNew = sqlite3_realloc(pCsr->zToken, pCsr->nAlloc+64); + if( !zNew ) return SQLITE_NOMEM; + zOut = &zNew[zOut - pCsr->zToken]; + pCsr->zToken = zNew; + pCsr->nAlloc += 64; + } + + /* Write the folded case of the last character read to the output */ + zEnd = z; + iOut = sqlite3FtsUnicodeFold(iCode, p->bRemoveDiacritic); + if( iOut ){ + WRITE_UTF8(zOut, iOut); + } + + /* If the cursor is not at EOF, read the next character */ + if( z>=zTerm ) break; + READ_UTF8(z, zTerm, iCode); + }while( unicodeIsAlnum(p, iCode) + || sqlite3FtsUnicodeIsdiacritic(iCode) + ); + + /* Set the output variables and return. */ + pCsr->iOff = (int)(z - pCsr->aInput); + *paToken = pCsr->zToken; + *pnToken = (int)(zOut - pCsr->zToken); + *piStart = (int)(zStart - pCsr->aInput); + *piEnd = (int)(zEnd - pCsr->aInput); + *piPos = pCsr->iToken++; + return SQLITE_OK; +} + +/* +** Set *ppModule to a pointer to the sqlite3_tokenizer_module +** structure for the unicode tokenizer. +*/ +SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const **ppModule){ + static const sqlite3_tokenizer_module module = { + 0, + unicodeCreate, + unicodeDestroy, + unicodeOpen, + unicodeClose, + unicodeNext, + 0, + }; + *ppModule = &module; +} + +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ +#endif /* ifndef SQLITE_DISABLE_FTS3_UNICODE */ + +/************** End of fts3_unicode.c ****************************************/ +/************** Begin file fts3_unicode2.c ***********************************/ +/* +** 2012 May 25 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +*/ + +/* +** DO NOT EDIT THIS MACHINE GENERATED FILE. +*/ + +#ifndef SQLITE_DISABLE_FTS3_UNICODE +#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) + +/* #include */ + +/* +** Return true if the argument corresponds to a unicode codepoint +** classified as either a letter or a number. Otherwise false. +** +** The results are undefined if the value passed to this function +** is less than zero. +*/ +SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int c){ + /* Each unsigned integer in the following array corresponds to a contiguous + ** range of unicode codepoints that are not either letters or numbers (i.e. + ** codepoints for which this function should return 0). + ** + ** The most significant 22 bits in each 32-bit value contain the first + ** codepoint in the range. The least significant 10 bits are used to store + ** the size of the range (always at least 1). In other words, the value + ** ((C<<22) + N) represents a range of N codepoints starting with codepoint + ** C. It is not possible to represent a range larger than 1023 codepoints + ** using this format. + */ + static const unsigned int aEntry[] = { + 0x00000030, 0x0000E807, 0x00016C06, 0x0001EC2F, 0x0002AC07, + 0x0002D001, 0x0002D803, 0x0002EC01, 0x0002FC01, 0x00035C01, + 0x0003DC01, 0x000B0804, 0x000B480E, 0x000B9407, 0x000BB401, + 0x000BBC81, 0x000DD401, 0x000DF801, 0x000E1002, 0x000E1C01, + 0x000FD801, 0x00120808, 0x00156806, 0x00162402, 0x00163C01, + 0x00164437, 0x0017CC02, 0x00180005, 0x00181816, 0x00187802, + 0x00192C15, 0x0019A804, 0x0019C001, 0x001B5001, 0x001B580F, + 0x001B9C07, 0x001BF402, 0x001C000E, 0x001C3C01, 0x001C4401, + 0x001CC01B, 0x001E980B, 0x001FAC09, 0x001FD804, 0x00205804, + 0x00206C09, 0x00209403, 0x0020A405, 0x0020C00F, 0x00216403, + 0x00217801, 0x0023901B, 0x00240004, 0x0024E803, 0x0024F812, + 0x00254407, 0x00258804, 0x0025C001, 0x00260403, 0x0026F001, + 0x0026F807, 0x00271C02, 0x00272C03, 0x00275C01, 0x00278802, + 0x0027C802, 0x0027E802, 0x00280403, 0x0028F001, 0x0028F805, + 0x00291C02, 0x00292C03, 0x00294401, 0x0029C002, 0x0029D401, + 0x002A0403, 0x002AF001, 0x002AF808, 0x002B1C03, 0x002B2C03, + 0x002B8802, 0x002BC002, 0x002C0403, 0x002CF001, 0x002CF807, + 0x002D1C02, 0x002D2C03, 0x002D5802, 0x002D8802, 0x002DC001, + 0x002E0801, 0x002EF805, 0x002F1803, 0x002F2804, 0x002F5C01, + 0x002FCC08, 0x00300403, 0x0030F807, 0x00311803, 0x00312804, + 0x00315402, 0x00318802, 0x0031FC01, 0x00320802, 0x0032F001, + 0x0032F807, 0x00331803, 0x00332804, 0x00335402, 0x00338802, + 0x00340802, 0x0034F807, 0x00351803, 0x00352804, 0x00355C01, + 0x00358802, 0x0035E401, 0x00360802, 0x00372801, 0x00373C06, + 0x00375801, 0x00376008, 0x0037C803, 0x0038C401, 0x0038D007, + 0x0038FC01, 0x00391C09, 0x00396802, 0x003AC401, 0x003AD006, + 0x003AEC02, 0x003B2006, 0x003C041F, 0x003CD00C, 0x003DC417, + 0x003E340B, 0x003E6424, 0x003EF80F, 0x003F380D, 0x0040AC14, + 0x00412806, 0x00415804, 0x00417803, 0x00418803, 0x00419C07, + 0x0041C404, 0x0042080C, 0x00423C01, 0x00426806, 0x0043EC01, + 0x004D740C, 0x004E400A, 0x00500001, 0x0059B402, 0x005A0001, + 0x005A6C02, 0x005BAC03, 0x005C4803, 0x005CC805, 0x005D4802, + 0x005DC802, 0x005ED023, 0x005F6004, 0x005F7401, 0x0060000F, + 0x0062A401, 0x0064800C, 0x0064C00C, 0x00650001, 0x00651002, + 0x0066C011, 0x00672002, 0x00677822, 0x00685C05, 0x00687802, + 0x0069540A, 0x0069801D, 0x0069FC01, 0x006A8007, 0x006AA006, + 0x006C0005, 0x006CD011, 0x006D6823, 0x006E0003, 0x006E840D, + 0x006F980E, 0x006FF004, 0x00709014, 0x0070EC05, 0x0071F802, + 0x00730008, 0x00734019, 0x0073B401, 0x0073C803, 0x00770027, + 0x0077F004, 0x007EF401, 0x007EFC03, 0x007F3403, 0x007F7403, + 0x007FB403, 0x007FF402, 0x00800065, 0x0081A806, 0x0081E805, + 0x00822805, 0x0082801A, 0x00834021, 0x00840002, 0x00840C04, + 0x00842002, 0x00845001, 0x00845803, 0x00847806, 0x00849401, + 0x00849C01, 0x0084A401, 0x0084B801, 0x0084E802, 0x00850005, + 0x00852804, 0x00853C01, 0x00864264, 0x00900027, 0x0091000B, + 0x0092704E, 0x00940200, 0x009C0475, 0x009E53B9, 0x00AD400A, + 0x00B39406, 0x00B3BC03, 0x00B3E404, 0x00B3F802, 0x00B5C001, + 0x00B5FC01, 0x00B7804F, 0x00B8C00C, 0x00BA001A, 0x00BA6C59, + 0x00BC00D6, 0x00BFC00C, 0x00C00005, 0x00C02019, 0x00C0A807, + 0x00C0D802, 0x00C0F403, 0x00C26404, 0x00C28001, 0x00C3EC01, + 0x00C64002, 0x00C6580A, 0x00C70024, 0x00C8001F, 0x00C8A81E, + 0x00C94001, 0x00C98020, 0x00CA2827, 0x00CB003F, 0x00CC0100, + 0x01370040, 0x02924037, 0x0293F802, 0x02983403, 0x0299BC10, + 0x029A7C01, 0x029BC008, 0x029C0017, 0x029C8002, 0x029E2402, + 0x02A00801, 0x02A01801, 0x02A02C01, 0x02A08C09, 0x02A0D804, + 0x02A1D004, 0x02A20002, 0x02A2D011, 0x02A33802, 0x02A38012, + 0x02A3E003, 0x02A4980A, 0x02A51C0D, 0x02A57C01, 0x02A60004, + 0x02A6CC1B, 0x02A77802, 0x02A8A40E, 0x02A90C01, 0x02A93002, + 0x02A97004, 0x02A9DC03, 0x02A9EC01, 0x02AAC001, 0x02AAC803, + 0x02AADC02, 0x02AAF802, 0x02AB0401, 0x02AB7802, 0x02ABAC07, + 0x02ABD402, 0x02AF8C0B, 0x03600001, 0x036DFC02, 0x036FFC02, + 0x037FFC01, 0x03EC7801, 0x03ECA401, 0x03EEC810, 0x03F4F802, + 0x03F7F002, 0x03F8001A, 0x03F88007, 0x03F8C023, 0x03F95013, + 0x03F9A004, 0x03FBFC01, 0x03FC040F, 0x03FC6807, 0x03FCEC06, + 0x03FD6C0B, 0x03FF8007, 0x03FFA007, 0x03FFE405, 0x04040003, + 0x0404DC09, 0x0405E411, 0x0406400C, 0x0407402E, 0x040E7C01, + 0x040F4001, 0x04215C01, 0x04247C01, 0x0424FC01, 0x04280403, + 0x04281402, 0x04283004, 0x0428E003, 0x0428FC01, 0x04294009, + 0x0429FC01, 0x042CE407, 0x04400003, 0x0440E016, 0x04420003, + 0x0442C012, 0x04440003, 0x04449C0E, 0x04450004, 0x04460003, + 0x0446CC0E, 0x04471404, 0x045AAC0D, 0x0491C004, 0x05BD442E, + 0x05BE3C04, 0x074000F6, 0x07440027, 0x0744A4B5, 0x07480046, + 0x074C0057, 0x075B0401, 0x075B6C01, 0x075BEC01, 0x075C5401, + 0x075CD401, 0x075D3C01, 0x075DBC01, 0x075E2401, 0x075EA401, + 0x075F0C01, 0x07BBC002, 0x07C0002C, 0x07C0C064, 0x07C2800F, + 0x07C2C40E, 0x07C3040F, 0x07C3440F, 0x07C4401F, 0x07C4C03C, + 0x07C5C02B, 0x07C7981D, 0x07C8402B, 0x07C90009, 0x07C94002, + 0x07CC0021, 0x07CCC006, 0x07CCDC46, 0x07CE0014, 0x07CE8025, + 0x07CF1805, 0x07CF8011, 0x07D0003F, 0x07D10001, 0x07D108B6, + 0x07D3E404, 0x07D4003E, 0x07D50004, 0x07D54018, 0x07D7EC46, + 0x07D9140B, 0x07DA0046, 0x07DC0074, 0x38000401, 0x38008060, + 0x380400F0, + }; + static const unsigned int aAscii[4] = { + 0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001, + }; + + if( c<128 ){ + return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 ); + }else if( c<(1<<22) ){ + unsigned int key = (((unsigned int)c)<<10) | 0x000003FF; + int iRes = 0; + int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; + int iLo = 0; + while( iHi>=iLo ){ + int iTest = (iHi + iLo) / 2; + if( key >= aEntry[iTest] ){ + iRes = iTest; + iLo = iTest+1; + }else{ + iHi = iTest-1; + } + } + assert( aEntry[0]=aEntry[iRes] ); + return (((unsigned int)c) >= ((aEntry[iRes]>>10) + (aEntry[iRes]&0x3FF))); + } + return 1; +} + + +/* +** If the argument is a codepoint corresponding to a lowercase letter +** in the ASCII range with a diacritic added, return the codepoint +** of the ASCII letter only. For example, if passed 235 - "LATIN +** SMALL LETTER E WITH DIAERESIS" - return 65 ("LATIN SMALL LETTER +** E"). The resuls of passing a codepoint that corresponds to an +** uppercase letter are undefined. +*/ +static int remove_diacritic(int c){ + unsigned short aDia[] = { + 0, 1797, 1848, 1859, 1891, 1928, 1940, 1995, + 2024, 2040, 2060, 2110, 2168, 2206, 2264, 2286, + 2344, 2383, 2472, 2488, 2516, 2596, 2668, 2732, + 2782, 2842, 2894, 2954, 2984, 3000, 3028, 3336, + 3456, 3696, 3712, 3728, 3744, 3896, 3912, 3928, + 3968, 4008, 4040, 4106, 4138, 4170, 4202, 4234, + 4266, 4296, 4312, 4344, 4408, 4424, 4472, 4504, + 6148, 6198, 6264, 6280, 6360, 6429, 6505, 6529, + 61448, 61468, 61534, 61592, 61642, 61688, 61704, 61726, + 61784, 61800, 61836, 61880, 61914, 61948, 61998, 62122, + 62154, 62200, 62218, 62302, 62364, 62442, 62478, 62536, + 62554, 62584, 62604, 62640, 62648, 62656, 62664, 62730, + 62924, 63050, 63082, 63274, 63390, + }; + char aChar[] = { + '\0', 'a', 'c', 'e', 'i', 'n', 'o', 'u', 'y', 'y', 'a', 'c', + 'd', 'e', 'e', 'g', 'h', 'i', 'j', 'k', 'l', 'n', 'o', 'r', + 's', 't', 'u', 'u', 'w', 'y', 'z', 'o', 'u', 'a', 'i', 'o', + 'u', 'g', 'k', 'o', 'j', 'g', 'n', 'a', 'e', 'i', 'o', 'r', + 'u', 's', 't', 'h', 'a', 'e', 'o', 'y', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', 'a', 'b', 'd', 'd', 'e', 'f', 'g', 'h', + 'h', 'i', 'k', 'l', 'l', 'm', 'n', 'p', 'r', 'r', 's', 't', + 'u', 'v', 'w', 'w', 'x', 'y', 'z', 'h', 't', 'w', 'y', 'a', + 'e', 'i', 'o', 'u', 'y', + }; + + unsigned int key = (((unsigned int)c)<<3) | 0x00000007; + int iRes = 0; + int iHi = sizeof(aDia)/sizeof(aDia[0]) - 1; + int iLo = 0; + while( iHi>=iLo ){ + int iTest = (iHi + iLo) / 2; + if( key >= aDia[iTest] ){ + iRes = iTest; + iLo = iTest+1; + }else{ + iHi = iTest-1; + } + } + assert( key>=aDia[iRes] ); + return ((c > (aDia[iRes]>>3) + (aDia[iRes]&0x07)) ? c : (int)aChar[iRes]); +} + + +/* +** Return true if the argument interpreted as a unicode codepoint +** is a diacritical modifier character. +*/ +SQLITE_PRIVATE int sqlite3FtsUnicodeIsdiacritic(int c){ + unsigned int mask0 = 0x08029FDF; + unsigned int mask1 = 0x000361F8; + if( c<768 || c>817 ) return 0; + return (c < 768+32) ? + (mask0 & (1 << (c-768))) : + (mask1 & (1 << (c-768-32))); +} + + +/* +** Interpret the argument as a unicode codepoint. If the codepoint +** is an upper case character that has a lower case equivalent, +** return the codepoint corresponding to the lower case version. +** Otherwise, return a copy of the argument. +** +** The results are undefined if the value passed to this function +** is less than zero. +*/ +SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){ + /* Each entry in the following array defines a rule for folding a range + ** of codepoints to lower case. The rule applies to a range of nRange + ** codepoints starting at codepoint iCode. + ** + ** If the least significant bit in flags is clear, then the rule applies + ** to all nRange codepoints (i.e. all nRange codepoints are upper case and + ** need to be folded). Or, if it is set, then the rule only applies to + ** every second codepoint in the range, starting with codepoint C. + ** + ** The 7 most significant bits in flags are an index into the aiOff[] + ** array. If a specific codepoint C does require folding, then its lower + ** case equivalent is ((C + aiOff[flags>>1]) & 0xFFFF). + ** + ** The contents of this array are generated by parsing the CaseFolding.txt + ** file distributed as part of the "Unicode Character Database". See + ** http://www.unicode.org for details. + */ + static const struct TableEntry { + unsigned short iCode; + unsigned char flags; + unsigned char nRange; + } aEntry[] = { + {65, 14, 26}, {181, 64, 1}, {192, 14, 23}, + {216, 14, 7}, {256, 1, 48}, {306, 1, 6}, + {313, 1, 16}, {330, 1, 46}, {376, 116, 1}, + {377, 1, 6}, {383, 104, 1}, {385, 50, 1}, + {386, 1, 4}, {390, 44, 1}, {391, 0, 1}, + {393, 42, 2}, {395, 0, 1}, {398, 32, 1}, + {399, 38, 1}, {400, 40, 1}, {401, 0, 1}, + {403, 42, 1}, {404, 46, 1}, {406, 52, 1}, + {407, 48, 1}, {408, 0, 1}, {412, 52, 1}, + {413, 54, 1}, {415, 56, 1}, {416, 1, 6}, + {422, 60, 1}, {423, 0, 1}, {425, 60, 1}, + {428, 0, 1}, {430, 60, 1}, {431, 0, 1}, + {433, 58, 2}, {435, 1, 4}, {439, 62, 1}, + {440, 0, 1}, {444, 0, 1}, {452, 2, 1}, + {453, 0, 1}, {455, 2, 1}, {456, 0, 1}, + {458, 2, 1}, {459, 1, 18}, {478, 1, 18}, + {497, 2, 1}, {498, 1, 4}, {502, 122, 1}, + {503, 134, 1}, {504, 1, 40}, {544, 110, 1}, + {546, 1, 18}, {570, 70, 1}, {571, 0, 1}, + {573, 108, 1}, {574, 68, 1}, {577, 0, 1}, + {579, 106, 1}, {580, 28, 1}, {581, 30, 1}, + {582, 1, 10}, {837, 36, 1}, {880, 1, 4}, + {886, 0, 1}, {902, 18, 1}, {904, 16, 3}, + {908, 26, 1}, {910, 24, 2}, {913, 14, 17}, + {931, 14, 9}, {962, 0, 1}, {975, 4, 1}, + {976, 140, 1}, {977, 142, 1}, {981, 146, 1}, + {982, 144, 1}, {984, 1, 24}, {1008, 136, 1}, + {1009, 138, 1}, {1012, 130, 1}, {1013, 128, 1}, + {1015, 0, 1}, {1017, 152, 1}, {1018, 0, 1}, + {1021, 110, 3}, {1024, 34, 16}, {1040, 14, 32}, + {1120, 1, 34}, {1162, 1, 54}, {1216, 6, 1}, + {1217, 1, 14}, {1232, 1, 88}, {1329, 22, 38}, + {4256, 66, 38}, {4295, 66, 1}, {4301, 66, 1}, + {7680, 1, 150}, {7835, 132, 1}, {7838, 96, 1}, + {7840, 1, 96}, {7944, 150, 8}, {7960, 150, 6}, + {7976, 150, 8}, {7992, 150, 8}, {8008, 150, 6}, + {8025, 151, 8}, {8040, 150, 8}, {8072, 150, 8}, + {8088, 150, 8}, {8104, 150, 8}, {8120, 150, 2}, + {8122, 126, 2}, {8124, 148, 1}, {8126, 100, 1}, + {8136, 124, 4}, {8140, 148, 1}, {8152, 150, 2}, + {8154, 120, 2}, {8168, 150, 2}, {8170, 118, 2}, + {8172, 152, 1}, {8184, 112, 2}, {8186, 114, 2}, + {8188, 148, 1}, {8486, 98, 1}, {8490, 92, 1}, + {8491, 94, 1}, {8498, 12, 1}, {8544, 8, 16}, + {8579, 0, 1}, {9398, 10, 26}, {11264, 22, 47}, + {11360, 0, 1}, {11362, 88, 1}, {11363, 102, 1}, + {11364, 90, 1}, {11367, 1, 6}, {11373, 84, 1}, + {11374, 86, 1}, {11375, 80, 1}, {11376, 82, 1}, + {11378, 0, 1}, {11381, 0, 1}, {11390, 78, 2}, + {11392, 1, 100}, {11499, 1, 4}, {11506, 0, 1}, + {42560, 1, 46}, {42624, 1, 24}, {42786, 1, 14}, + {42802, 1, 62}, {42873, 1, 4}, {42877, 76, 1}, + {42878, 1, 10}, {42891, 0, 1}, {42893, 74, 1}, + {42896, 1, 4}, {42912, 1, 10}, {42922, 72, 1}, + {65313, 14, 26}, + }; + static const unsigned short aiOff[] = { + 1, 2, 8, 15, 16, 26, 28, 32, + 37, 38, 40, 48, 63, 64, 69, 71, + 79, 80, 116, 202, 203, 205, 206, 207, + 209, 210, 211, 213, 214, 217, 218, 219, + 775, 7264, 10792, 10795, 23228, 23256, 30204, 54721, + 54753, 54754, 54756, 54787, 54793, 54809, 57153, 57274, + 57921, 58019, 58363, 61722, 65268, 65341, 65373, 65406, + 65408, 65410, 65415, 65424, 65436, 65439, 65450, 65462, + 65472, 65476, 65478, 65480, 65482, 65488, 65506, 65511, + 65514, 65521, 65527, 65528, 65529, + }; + + int ret = c; + + assert( c>=0 ); + assert( sizeof(unsigned short)==2 && sizeof(unsigned char)==1 ); + + if( c<128 ){ + if( c>='A' && c<='Z' ) ret = c + ('a' - 'A'); + }else if( c<65536 ){ + int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; + int iLo = 0; + int iRes = -1; + + while( iHi>=iLo ){ + int iTest = (iHi + iLo) / 2; + int cmp = (c - aEntry[iTest].iCode); + if( cmp>=0 ){ + iRes = iTest; + iLo = iTest+1; + }else{ + iHi = iTest-1; + } + } + assert( iRes<0 || c>=aEntry[iRes].iCode ); + + if( iRes>=0 ){ + const struct TableEntry *p = &aEntry[iRes]; + if( c<(p->iCode + p->nRange) && 0==(0x01 & p->flags & (p->iCode ^ c)) ){ + ret = (c + (aiOff[p->flags>>1])) & 0x0000FFFF; + assert( ret>0 ); + } + } + + if( bRemoveDiacritic ) ret = remove_diacritic(ret); + } + + else if( c>=66560 && c<66600 ){ + ret = c + 40; + } + + return ret; +} +#endif /* defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) */ +#endif /* !defined(SQLITE_DISABLE_FTS3_UNICODE) */ + +/************** End of fts3_unicode2.c ***************************************/ /************** Begin file rtree.c *******************************************/ /* ** 2001 September 15 @@ -124436,58 +147525,20 @@ SQLITE_PRIVATE void sqlite3Fts3Matchinfo( #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RTREE) -/* -** This file contains an implementation of a couple of different variants -** of the r-tree algorithm. See the README file for further details. The -** same data-structure is used for all, but the algorithms for insert and -** delete operations vary. The variants used are selected at compile time -** by defining the following symbols: -*/ - -/* Either, both or none of the following may be set to activate -** r*tree variant algorithms. -*/ -#define VARIANT_RSTARTREE_CHOOSESUBTREE 0 -#define VARIANT_RSTARTREE_REINSERT 1 - -/* -** Exactly one of the following must be set to 1. -*/ -#define VARIANT_GUTTMAN_QUADRATIC_SPLIT 0 -#define VARIANT_GUTTMAN_LINEAR_SPLIT 0 -#define VARIANT_RSTARTREE_SPLIT 1 - -#define VARIANT_GUTTMAN_SPLIT \ - (VARIANT_GUTTMAN_LINEAR_SPLIT||VARIANT_GUTTMAN_QUADRATIC_SPLIT) - -#if VARIANT_GUTTMAN_QUADRATIC_SPLIT - #define PickNext QuadraticPickNext - #define PickSeeds QuadraticPickSeeds - #define AssignCells splitNodeGuttman -#endif -#if VARIANT_GUTTMAN_LINEAR_SPLIT - #define PickNext LinearPickNext - #define PickSeeds LinearPickSeeds - #define AssignCells splitNodeGuttman -#endif -#if VARIANT_RSTARTREE_SPLIT - #define AssignCells splitNodeStartree -#endif - -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif - #ifndef SQLITE_CORE SQLITE_EXTENSION_INIT1 #else #endif +/* #include */ +/* #include */ +/* #include */ #ifndef SQLITE_AMALGAMATION #include "sqlite3rtree.h" typedef sqlite3_int64 i64; typedef unsigned char u8; +typedef unsigned short u16; typedef unsigned int u32; #endif @@ -124505,6 +147556,7 @@ typedef struct RtreeConstraint RtreeConstraint; typedef struct RtreeMatchArg RtreeMatchArg; typedef struct RtreeGeomCallback RtreeGeomCallback; typedef union RtreeCoord RtreeCoord; +typedef struct RtreeSearchPoint RtreeSearchPoint; /* The rtree may have between 1 and RTREE_MAX_DIMENSIONS dimensions. */ #define RTREE_MAX_DIMENSIONS 5 @@ -124513,22 +147565,33 @@ typedef union RtreeCoord RtreeCoord; ** ever contain very many entries, so a fixed number of buckets is ** used. */ -#define HASHSIZE 128 +#define HASHSIZE 97 + +/* The xBestIndex method of this virtual table requires an estimate of +** the number of rows in the virtual table to calculate the costs of +** various strategies. If possible, this estimate is loaded from the +** sqlite_stat1 table (with RTREE_MIN_ROWEST as a hard-coded minimum). +** Otherwise, if no sqlite_stat1 entry is available, use +** RTREE_DEFAULT_ROWEST. +*/ +#define RTREE_DEFAULT_ROWEST 1048576 +#define RTREE_MIN_ROWEST 100 /* ** An rtree virtual-table object. */ struct Rtree { - sqlite3_vtab base; + sqlite3_vtab base; /* Base class. Must be first */ sqlite3 *db; /* Host database connection */ int iNodeSize; /* Size in bytes of each node in the node table */ - int nDim; /* Number of dimensions */ - int nBytesPerCell; /* Bytes consumed per cell */ + u8 nDim; /* Number of dimensions */ + u8 eCoordType; /* RTREE_COORD_REAL32 or RTREE_COORD_INT32 */ + u8 nBytesPerCell; /* Bytes consumed per cell */ int iDepth; /* Current depth of the r-tree structure */ char *zDb; /* Name of database containing r-tree table */ char *zName; /* Name of r-tree table */ - RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ int nBusy; /* Current number of users of this structure */ + i64 nRowEst; /* Estimated number of rows in this table */ /* List of nodes removed during a CondenseTree operation. List is ** linked together via the pointer normally used for hash chains - @@ -124553,13 +147616,45 @@ struct Rtree { sqlite3_stmt *pWriteParent; sqlite3_stmt *pDeleteParent; - int eCoordType; + RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ }; -/* Possible values for eCoordType: */ +/* Possible values for Rtree.eCoordType: */ #define RTREE_COORD_REAL32 0 #define RTREE_COORD_INT32 1 +/* +** If SQLITE_RTREE_INT_ONLY is defined, then this virtual table will +** only deal with integer coordinates. No floating point operations +** will be done. +*/ +#ifdef SQLITE_RTREE_INT_ONLY + typedef sqlite3_int64 RtreeDValue; /* High accuracy coordinate */ + typedef int RtreeValue; /* Low accuracy coordinate */ +# define RTREE_ZERO 0 +#else + typedef double RtreeDValue; /* High accuracy coordinate */ + typedef float RtreeValue; /* Low accuracy coordinate */ +# define RTREE_ZERO 0.0 +#endif + +/* +** When doing a search of an r-tree, instances of the following structure +** record intermediate results from the tree walk. +** +** The id is always a node-id. For iLevel>=1 the id is the node-id of +** the node that the RtreeSearchPoint represents. When iLevel==0, however, +** the id is of the parent node and the cell that RtreeSearchPoint +** represents is the iCell-th entry in the parent node. +*/ +struct RtreeSearchPoint { + RtreeDValue rScore; /* The score for this node. Smallest goes first. */ + sqlite3_int64 id; /* Node ID */ + u8 iLevel; /* 0=entries. 1=leaf node. 2+ for higher */ + u8 eWithin; /* PARTLY_WITHIN or FULLY_WITHIN */ + u8 iCell; /* Cell index within the node */ +}; + /* ** The minimum number of cells allowed for a node is a third of the ** maximum. In Gutman's notation: @@ -124582,33 +147677,61 @@ struct Rtree { */ #define RTREE_MAX_DEPTH 40 + +/* +** Number of entries in the cursor RtreeNode cache. The first entry is +** used to cache the RtreeNode for RtreeCursor.sPoint. The remaining +** entries cache the RtreeNode for the first elements of the priority queue. +*/ +#define RTREE_CACHE_SZ 5 + /* ** An rtree cursor object. */ struct RtreeCursor { - sqlite3_vtab_cursor base; - RtreeNode *pNode; /* Node cursor is currently pointing at */ - int iCell; /* Index of current cell in pNode */ + sqlite3_vtab_cursor base; /* Base class. Must be first */ + u8 atEOF; /* True if at end of search */ + u8 bPoint; /* True if sPoint is valid */ int iStrategy; /* Copy of idxNum search parameter */ int nConstraint; /* Number of entries in aConstraint */ RtreeConstraint *aConstraint; /* Search constraints. */ + int nPointAlloc; /* Number of slots allocated for aPoint[] */ + int nPoint; /* Number of slots used in aPoint[] */ + int mxLevel; /* iLevel value for root of the tree */ + RtreeSearchPoint *aPoint; /* Priority queue for search points */ + RtreeSearchPoint sPoint; /* Cached next search point */ + RtreeNode *aNode[RTREE_CACHE_SZ]; /* Rtree node cache */ + u32 anQueue[RTREE_MAX_DEPTH+1]; /* Number of queued entries by iLevel */ }; +/* Return the Rtree of a RtreeCursor */ +#define RTREE_OF_CURSOR(X) ((Rtree*)((X)->base.pVtab)) + +/* +** A coordinate can be either a floating point number or a integer. All +** coordinates within a single R-Tree are always of the same time. +*/ union RtreeCoord { - float f; - int i; + RtreeValue f; /* Floating point value */ + int i; /* Integer value */ + u32 u; /* Unsigned for byte-order conversions */ }; /* ** The argument is an RtreeCoord. Return the value stored within the RtreeCoord -** formatted as a double. This macro assumes that local variable pRtree points -** to the Rtree structure associated with the RtreeCoord. +** formatted as a RtreeDValue (double or int64). This macro assumes that local +** variable pRtree points to the Rtree structure associated with the +** RtreeCoord. */ -#define DCOORD(coord) ( \ - (pRtree->eCoordType==RTREE_COORD_REAL32) ? \ - ((double)coord.f) : \ - ((double)coord.i) \ -) +#ifdef SQLITE_RTREE_INT_ONLY +# define DCOORD(coord) ((RtreeDValue)coord.i) +#else +# define DCOORD(coord) ( \ + (pRtree->eCoordType==RTREE_COORD_REAL32) ? \ + ((double)coord.f) : \ + ((double)coord.i) \ + ) +#endif /* ** A search constraint. @@ -124616,38 +147739,67 @@ union RtreeCoord { struct RtreeConstraint { int iCoord; /* Index of constrained coordinate */ int op; /* Constraining operation */ - double rValue; /* Constraint value. */ - int (*xGeom)(sqlite3_rtree_geometry *, int, double *, int *); - sqlite3_rtree_geometry *pGeom; /* Constraint callback argument for a MATCH */ + union { + RtreeDValue rValue; /* Constraint value. */ + int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*); + int (*xQueryFunc)(sqlite3_rtree_query_info*); + } u; + sqlite3_rtree_query_info *pInfo; /* xGeom and xQueryFunc argument */ }; /* Possible values for RtreeConstraint.op */ -#define RTREE_EQ 0x41 -#define RTREE_LE 0x42 -#define RTREE_LT 0x43 -#define RTREE_GE 0x44 -#define RTREE_GT 0x45 -#define RTREE_MATCH 0x46 +#define RTREE_EQ 0x41 /* A */ +#define RTREE_LE 0x42 /* B */ +#define RTREE_LT 0x43 /* C */ +#define RTREE_GE 0x44 /* D */ +#define RTREE_GT 0x45 /* E */ +#define RTREE_MATCH 0x46 /* F: Old-style sqlite3_rtree_geometry_callback() */ +#define RTREE_QUERY 0x47 /* G: New-style sqlite3_rtree_query_callback() */ + /* ** An rtree structure node. */ struct RtreeNode { - RtreeNode *pParent; /* Parent node */ - i64 iNode; - int nRef; - int isDirty; - u8 *zData; - RtreeNode *pNext; /* Next node in this hash chain */ + RtreeNode *pParent; /* Parent node */ + i64 iNode; /* The node number */ + int nRef; /* Number of references to this node */ + int isDirty; /* True if the node needs to be written to disk */ + u8 *zData; /* Content of the node, as should be on disk */ + RtreeNode *pNext; /* Next node in this hash collision chain */ }; + +/* Return the number of cells in a node */ #define NCELL(pNode) readInt16(&(pNode)->zData[2]) /* -** Structure to store a deserialized rtree record. +** A single cell from a node, deserialized */ struct RtreeCell { - i64 iRowid; - RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2]; + i64 iRowid; /* Node or entry ID */ + RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2]; /* Bounding box coordinates */ +}; + + +/* +** This object becomes the sqlite3_user_data() for the SQL functions +** that are created by sqlite3_rtree_geometry_callback() and +** sqlite3_rtree_query_callback() and which appear on the right of MATCH +** operators in order to constrain a search. +** +** xGeom and xQueryFunc are the callback functions. Exactly one of +** xGeom and xQueryFunc fields is non-NULL, depending on whether the +** SQL function was created using sqlite3_rtree_geometry_callback() or +** sqlite3_rtree_query_callback(). +** +** This object is deleted automatically by the destructor mechanism in +** sqlite3_create_function_v2(). +*/ +struct RtreeGeomCallback { + int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*); + int (*xQueryFunc)(sqlite3_rtree_query_info*); + void (*xDestructor)(void*); + void *pContext; }; @@ -124659,29 +147811,16 @@ struct RtreeCell { #define RTREE_GEOMETRY_MAGIC 0x891245AB /* -** An instance of this structure must be supplied as a blob argument to -** the right-hand-side of an SQL MATCH operator used to constrain an -** r-tree query. +** An instance of this structure (in the form of a BLOB) is returned by +** the SQL functions that sqlite3_rtree_geometry_callback() and +** sqlite3_rtree_query_callback() create, and is read as the right-hand +** operand to the MATCH operator of an R-Tree. */ struct RtreeMatchArg { - u32 magic; /* Always RTREE_GEOMETRY_MAGIC */ - int (*xGeom)(sqlite3_rtree_geometry *, int, double *, int *); - void *pContext; - int nParam; - double aParam[1]; -}; - -/* -** When a geometry callback is created (see sqlite3_rtree_geometry_callback), -** a single instance of the following structure is allocated. It is used -** as the context for the user-function created by by s_r_g_c(). The object -** is eventually deleted by the destructor mechanism provided by -** sqlite3_create_function_v2() (which is called by s_r_g_c() to create -** the geometry callback function). -*/ -struct RtreeGeomCallback { - int (*xGeom)(sqlite3_rtree_geometry *, int, double *, int *); - void *pContext; + u32 magic; /* Always RTREE_GEOMETRY_MAGIC */ + RtreeGeomCallback cb; /* Info about the callback functions */ + int nParam; /* Number of parameters to the SQL function */ + RtreeDValue aParam[1]; /* Values for parameters to the SQL function */ }; #ifndef MAX @@ -124775,10 +147914,7 @@ static void nodeZero(Rtree *pRtree, RtreeNode *p){ ** in the Rtree.aHash table. */ static int nodeHash(i64 iNode){ - return ( - (iNode>>56) ^ (iNode>>48) ^ (iNode>>40) ^ (iNode>>32) ^ - (iNode>>24) ^ (iNode>>16) ^ (iNode>> 8) ^ (iNode>> 0) - ) % HASHSIZE; + return iNode % HASHSIZE; } /* @@ -124838,8 +147974,7 @@ static RtreeNode *nodeNew(Rtree *pRtree, RtreeNode *pParent){ /* ** Obtain a reference to an r-tree node. */ -static int -nodeAcquire( +static int nodeAcquire( Rtree *pRtree, /* R-tree structure */ i64 iNode, /* Node number to load */ RtreeNode *pParent, /* Either the parent node or NULL */ @@ -124928,10 +148063,10 @@ nodeAcquire( ** Overwrite cell iCell of node pNode with the contents of pCell. */ static void nodeOverwriteCell( - Rtree *pRtree, - RtreeNode *pNode, - RtreeCell *pCell, - int iCell + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node into which the cell is to be written */ + RtreeCell *pCell, /* The cell to write */ + int iCell /* Index into pNode into which pCell is written */ ){ int ii; u8 *p = &pNode->zData[4 + pRtree->nBytesPerCell*iCell]; @@ -124943,7 +148078,7 @@ static void nodeOverwriteCell( } /* -** Remove cell the cell with index iCell from node pNode. +** Remove the cell with index iCell from node pNode. */ static void nodeDeleteCell(Rtree *pRtree, RtreeNode *pNode, int iCell){ u8 *pDst = &pNode->zData[4 + pRtree->nBytesPerCell*iCell]; @@ -124960,11 +148095,10 @@ static void nodeDeleteCell(Rtree *pRtree, RtreeNode *pNode, int iCell){ ** ** If there is not enough free space in pNode, return SQLITE_FULL. */ -static int -nodeInsertCell( - Rtree *pRtree, - RtreeNode *pNode, - RtreeCell *pCell +static int nodeInsertCell( + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* Write new cell into this node */ + RtreeCell *pCell /* The cell to be inserted */ ){ int nCell; /* Current number of cells in pNode */ int nMaxCell; /* Maximum number of cells for pNode */ @@ -124985,8 +148119,7 @@ nodeInsertCell( /* ** If the node is dirty, write it out to the database. */ -static int -nodeWrite(Rtree *pRtree, RtreeNode *pNode){ +static int nodeWrite(Rtree *pRtree, RtreeNode *pNode){ int rc = SQLITE_OK; if( pNode->isDirty ){ sqlite3_stmt *p = pRtree->pWriteNode; @@ -125011,8 +148144,7 @@ nodeWrite(Rtree *pRtree, RtreeNode *pNode){ ** Release a reference to a node. If the node is dirty and the reference ** count drops to zero, the node data is written to the database. */ -static int -nodeRelease(Rtree *pRtree, RtreeNode *pNode){ +static int nodeRelease(Rtree *pRtree, RtreeNode *pNode){ int rc = SQLITE_OK; if( pNode ){ assert( pNode->nRef>0 ); @@ -125040,9 +148172,9 @@ nodeRelease(Rtree *pRtree, RtreeNode *pNode){ ** an internal node, then the 64-bit integer is a child page number. */ static i64 nodeGetRowid( - Rtree *pRtree, - RtreeNode *pNode, - int iCell + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node from which to extract the ID */ + int iCell /* The cell index from which to extract the ID */ ){ assert( iCellzData[4 + pRtree->nBytesPerCell*iCell]); @@ -125052,11 +148184,11 @@ static i64 nodeGetRowid( ** Return coordinate iCoord from cell iCell in node pNode. */ static void nodeGetCoord( - Rtree *pRtree, - RtreeNode *pNode, - int iCell, - int iCoord, - RtreeCoord *pCoord /* Space to write result to */ + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node from which to extract a coordinate */ + int iCell, /* The index of the cell within the node */ + int iCoord, /* Which coordinate to extract */ + RtreeCoord *pCoord /* OUT: Space to write result to */ ){ readCoord(&pNode->zData[12 + pRtree->nBytesPerCell*iCell + 4*iCoord], pCoord); } @@ -125066,15 +148198,20 @@ static void nodeGetCoord( ** to by pCell with the results. */ static void nodeGetCell( - Rtree *pRtree, - RtreeNode *pNode, - int iCell, - RtreeCell *pCell -){ - int ii; + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node containing the cell to be read */ + int iCell, /* Index of the cell within the node */ + RtreeCell *pCell /* OUT: Write the cell contents here */ +){ + u8 *pData; + u8 *pEnd; + RtreeCoord *pCoord; pCell->iRowid = nodeGetRowid(pRtree, pNode, iCell); - for(ii=0; iinDim*2; ii++){ - nodeGetCoord(pRtree, pNode, iCell, ii, &pCell->aCoord[ii]); + pData = pNode->zData + (12 + pRtree->nBytesPerCell*iCell); + pEnd = pData + pRtree->nDim*8; + pCoord = pCell->aCoord; + for(; pDataaConstraint ){ int i; /* Used to iterate through constraint array */ for(i=0; inConstraint; i++){ - sqlite3_rtree_geometry *pGeom = pCsr->aConstraint[i].pGeom; - if( pGeom ){ - if( pGeom->xDelUser ) pGeom->xDelUser(pGeom->pUser); - sqlite3_free(pGeom); + sqlite3_rtree_query_info *pInfo = pCsr->aConstraint[i].pInfo; + if( pInfo ){ + if( pInfo->xDelUser ) pInfo->xDelUser(pInfo->pUser); + sqlite3_free(pInfo); } } sqlite3_free(pCsr->aConstraint); @@ -125216,12 +148353,13 @@ static void freeCursorConstraints(RtreeCursor *pCsr){ */ static int rtreeClose(sqlite3_vtab_cursor *cur){ Rtree *pRtree = (Rtree *)(cur->pVtab); - int rc; + int ii; RtreeCursor *pCsr = (RtreeCursor *)cur; freeCursorConstraints(pCsr); - rc = nodeRelease(pRtree, pCsr->pNode); + sqlite3_free(pCsr->aPoint); + for(ii=0; iiaNode[ii]); sqlite3_free(pCsr); - return rc; + return SQLITE_OK; } /* @@ -125232,194 +148370,164 @@ static int rtreeClose(sqlite3_vtab_cursor *cur){ */ static int rtreeEof(sqlite3_vtab_cursor *cur){ RtreeCursor *pCsr = (RtreeCursor *)cur; - return (pCsr->pNode==0); + return pCsr->atEOF; +} + +/* +** Convert raw bits from the on-disk RTree record into a coordinate value. +** The on-disk format is big-endian and needs to be converted for little- +** endian platforms. The on-disk record stores integer coordinates if +** eInt is true and it stores 32-bit floating point records if eInt is +** false. a[] is the four bytes of the on-disk record to be decoded. +** Store the results in "r". +** +** There are three versions of this macro, one each for little-endian and +** big-endian processors and a third generic implementation. The endian- +** specific implementations are much faster and are preferred if the +** processor endianness is known at compile-time. The SQLITE_BYTEORDER +** macro is part of sqliteInt.h and hence the endian-specific +** implementation will only be used if this module is compiled as part +** of the amalgamation. +*/ +#if defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==1234 +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + memcpy(&c.u,a,4); \ + c.u = ((c.u>>24)&0xff)|((c.u>>8)&0xff00)| \ + ((c.u&0xff)<<24)|((c.u&0xff00)<<8); \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ +} +#elif defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==4321 +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + memcpy(&c.u,a,4); \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ +} +#else +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + c.u = ((u32)a[0]<<24) + ((u32)a[1]<<16) \ + +((u32)a[2]<<8) + a[3]; \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ } +#endif /* -** The r-tree constraint passed as the second argument to this function is -** guaranteed to be a MATCH constraint. +** Check the RTree node or entry given by pCellData and p against the MATCH +** constraint pConstraint. */ -static int testRtreeGeom( - Rtree *pRtree, /* R-Tree object */ - RtreeConstraint *pConstraint, /* MATCH constraint to test */ - RtreeCell *pCell, /* Cell to test */ - int *pbRes /* OUT: Test result */ +static int rtreeCallbackConstraint( + RtreeConstraint *pConstraint, /* The constraint to test */ + int eInt, /* True if RTree holding integer coordinates */ + u8 *pCellData, /* Raw cell content */ + RtreeSearchPoint *pSearch, /* Container of this cell */ + sqlite3_rtree_dbl *prScore, /* OUT: score for the cell */ + int *peWithin /* OUT: visibility of the cell */ ){ - int i; - double aCoord[RTREE_MAX_DIMENSIONS*2]; - int nCoord = pRtree->nDim*2; + int i; /* Loop counter */ + sqlite3_rtree_query_info *pInfo = pConstraint->pInfo; /* Callback info */ + int nCoord = pInfo->nCoord; /* No. of coordinates */ + int rc; /* Callback return code */ + sqlite3_rtree_dbl aCoord[RTREE_MAX_DIMENSIONS*2]; /* Decoded coordinates */ - assert( pConstraint->op==RTREE_MATCH ); - assert( pConstraint->pGeom ); + assert( pConstraint->op==RTREE_MATCH || pConstraint->op==RTREE_QUERY ); + assert( nCoord==2 || nCoord==4 || nCoord==6 || nCoord==8 || nCoord==10 ); - for(i=0; iaCoord[i]); + if( pConstraint->op==RTREE_QUERY && pSearch->iLevel==1 ){ + pInfo->iRowid = readInt64(pCellData); } - return pConstraint->xGeom(pConstraint->pGeom, nCoord, aCoord, pbRes); -} - -/* -** Cursor pCursor currently points to a cell in a non-leaf page. -** Set *pbEof to true if the sub-tree headed by the cell is filtered -** (excluded) by the constraints in the pCursor->aConstraint[] -** array, or false otherwise. -** -** Return SQLITE_OK if successful or an SQLite error code if an error -** occurs within a geometry callback. -*/ -static int testRtreeCell(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){ - RtreeCell cell; - int ii; - int bRes = 0; - int rc = SQLITE_OK; - - nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell); - for(ii=0; bRes==0 && iinConstraint; ii++){ - RtreeConstraint *p = &pCursor->aConstraint[ii]; - double cell_min = DCOORD(cell.aCoord[(p->iCoord>>1)*2]); - double cell_max = DCOORD(cell.aCoord[(p->iCoord>>1)*2+1]); - - assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE - || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH - ); - - switch( p->op ){ - case RTREE_LE: case RTREE_LT: - bRes = p->rValuerValue>cell_max; - break; - - case RTREE_EQ: - bRes = (p->rValue>cell_max || p->rValueop==RTREE_MATCH ); - rc = testRtreeGeom(pRtree, p, &cell, &bRes); - bRes = !bRes; - break; - } + pCellData += 8; + for(i=0; iop==RTREE_MATCH ){ + rc = pConstraint->u.xGeom((sqlite3_rtree_geometry*)pInfo, + nCoord, aCoord, &i); + if( i==0 ) *peWithin = NOT_WITHIN; + *prScore = RTREE_ZERO; + }else{ + pInfo->aCoord = aCoord; + pInfo->iLevel = pSearch->iLevel - 1; + pInfo->rScore = pInfo->rParentScore = pSearch->rScore; + pInfo->eWithin = pInfo->eParentWithin = pSearch->eWithin; + rc = pConstraint->u.xQueryFunc(pInfo); + if( pInfo->eWithin<*peWithin ) *peWithin = pInfo->eWithin; + if( pInfo->rScore<*prScore || *prScorerScore; } } - - *pbEof = bRes; return rc; } /* -** Test if the cell that cursor pCursor currently points to -** would be filtered (excluded) by the constraints in the -** pCursor->aConstraint[] array. If so, set *pbEof to true before -** returning. If the cell is not filtered (excluded) by the constraints, -** set pbEof to zero. -** -** Return SQLITE_OK if successful or an SQLite error code if an error -** occurs within a geometry callback. -** -** This function assumes that the cell is part of a leaf node. +** Check the internal RTree node given by pCellData against constraint p. +** If this constraint cannot be satisfied by any child within the node, +** set *peWithin to NOT_WITHIN. */ -static int testRtreeEntry(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){ - RtreeCell cell; - int ii; - *pbEof = 0; +static void rtreeNonleafConstraint( + RtreeConstraint *p, /* The constraint to test */ + int eInt, /* True if RTree holds integer coordinates */ + u8 *pCellData, /* Raw cell content as appears on disk */ + int *peWithin /* Adjust downward, as appropriate */ +){ + sqlite3_rtree_dbl val; /* Coordinate value convert to a double */ - nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell); - for(ii=0; iinConstraint; ii++){ - RtreeConstraint *p = &pCursor->aConstraint[ii]; - double coord = DCOORD(cell.aCoord[p->iCoord]); - int res; - assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE - || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH - ); - switch( p->op ){ - case RTREE_LE: res = (coord<=p->rValue); break; - case RTREE_LT: res = (coordrValue); break; - case RTREE_GE: res = (coord>=p->rValue); break; - case RTREE_GT: res = (coord>p->rValue); break; - case RTREE_EQ: res = (coord==p->rValue); break; - default: { - int rc; - assert( p->op==RTREE_MATCH ); - rc = testRtreeGeom(pRtree, p, &cell, &res); - if( rc!=SQLITE_OK ){ - return rc; - } - break; - } - } + /* p->iCoord might point to either a lower or upper bound coordinate + ** in a coordinate pair. But make pCellData point to the lower bound. + */ + pCellData += 8 + 4*(p->iCoord&0xfe); - if( !res ){ - *pbEof = 1; - return SQLITE_OK; - } - } + assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE + || p->op==RTREE_GT || p->op==RTREE_EQ ); + switch( p->op ){ + case RTREE_LE: + case RTREE_LT: + case RTREE_EQ: + RTREE_DECODE_COORD(eInt, pCellData, val); + /* val now holds the lower bound of the coordinate pair */ + if( p->u.rValue>=val ) return; + if( p->op!=RTREE_EQ ) break; /* RTREE_LE and RTREE_LT end here */ + /* Fall through for the RTREE_EQ case */ - return SQLITE_OK; + default: /* RTREE_GT or RTREE_GE, or fallthrough of RTREE_EQ */ + pCellData += 4; + RTREE_DECODE_COORD(eInt, pCellData, val); + /* val now holds the upper bound of the coordinate pair */ + if( p->u.rValue<=val ) return; + } + *peWithin = NOT_WITHIN; } /* -** Cursor pCursor currently points at a node that heads a sub-tree of -** height iHeight (if iHeight==0, then the node is a leaf). Descend -** to point to the left-most cell of the sub-tree that matches the -** configured constraints. +** Check the leaf RTree cell given by pCellData against constraint p. +** If this constraint is not satisfied, set *peWithin to NOT_WITHIN. +** If the constraint is satisfied, leave *peWithin unchanged. +** +** The constraint is of the form: xN op $val +** +** The op is given by p->op. The xN is p->iCoord-th coordinate in +** pCellData. $val is given by p->u.rValue. */ -static int descendToCell( - Rtree *pRtree, - RtreeCursor *pCursor, - int iHeight, - int *pEof /* OUT: Set to true if cannot descend */ +static void rtreeLeafConstraint( + RtreeConstraint *p, /* The constraint to test */ + int eInt, /* True if RTree holds integer coordinates */ + u8 *pCellData, /* Raw cell content as appears on disk */ + int *peWithin /* Adjust downward, as appropriate */ ){ - int isEof; - int rc; - int ii; - RtreeNode *pChild; - sqlite3_int64 iRowid; - - RtreeNode *pSavedNode = pCursor->pNode; - int iSavedCell = pCursor->iCell; - - assert( iHeight>=0 ); - - if( iHeight==0 ){ - rc = testRtreeEntry(pRtree, pCursor, &isEof); - }else{ - rc = testRtreeCell(pRtree, pCursor, &isEof); - } - if( rc!=SQLITE_OK || isEof || iHeight==0 ){ - goto descend_to_cell_out; - } + RtreeDValue xN; /* Coordinate value converted to a double */ - iRowid = nodeGetRowid(pRtree, pCursor->pNode, pCursor->iCell); - rc = nodeAcquire(pRtree, iRowid, pCursor->pNode, &pChild); - if( rc!=SQLITE_OK ){ - goto descend_to_cell_out; - } - - nodeRelease(pRtree, pCursor->pNode); - pCursor->pNode = pChild; - isEof = 1; - for(ii=0; isEof && iiiCell = ii; - rc = descendToCell(pRtree, pCursor, iHeight-1, &isEof); - if( rc!=SQLITE_OK ){ - goto descend_to_cell_out; - } - } - - if( isEof ){ - assert( pCursor->pNode==pChild ); - nodeReference(pSavedNode); - nodeRelease(pRtree, pChild); - pCursor->pNode = pSavedNode; - pCursor->iCell = iSavedCell; + assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE + || p->op==RTREE_GT || p->op==RTREE_EQ ); + pCellData += 8 + p->iCoord*4; + RTREE_DECODE_COORD(eInt, pCellData, xN); + switch( p->op ){ + case RTREE_LE: if( xN <= p->u.rValue ) return; break; + case RTREE_LT: if( xN < p->u.rValue ) return; break; + case RTREE_GE: if( xN >= p->u.rValue ) return; break; + case RTREE_GT: if( xN > p->u.rValue ) return; break; + default: if( xN == p->u.rValue ) return; break; } - -descend_to_cell_out: - *pEof = isEof; - return rc; + *peWithin = NOT_WITHIN; } /* @@ -125434,6 +148542,7 @@ static int nodeRowidIndex( ){ int ii; int nCell = NCELL(pNode); + assert( nCell<200 ); for(ii=0; iipVtab); - RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - int rc = SQLITE_OK; +static int rtreeSearchPointCompare( + const RtreeSearchPoint *pA, + const RtreeSearchPoint *pB +){ + if( pA->rScorerScore ) return -1; + if( pA->rScore>pB->rScore ) return +1; + if( pA->iLeveliLevel ) return -1; + if( pA->iLevel>pB->iLevel ) return +1; + return 0; +} - /* RtreeCursor.pNode must not be NULL. If is is NULL, then this cursor is - ** already at EOF. It is against the rules to call the xNext() method of - ** a cursor that has already reached EOF. - */ - assert( pCsr->pNode ); - - if( pCsr->iStrategy==1 ){ - /* This "scan" is a direct lookup by rowid. There is no next entry. */ - nodeRelease(pRtree, pCsr->pNode); - pCsr->pNode = 0; - }else{ - /* Move to the next entry that matches the configured constraints. */ - int iHeight = 0; - while( pCsr->pNode ){ - RtreeNode *pNode = pCsr->pNode; - int nCell = NCELL(pNode); - for(pCsr->iCell++; pCsr->iCelliCell++){ - int isEof; - rc = descendToCell(pRtree, pCsr, iHeight, &isEof); - if( rc!=SQLITE_OK || !isEof ){ - return rc; +/* +** Interchange to search points in a cursor. +*/ +static void rtreeSearchPointSwap(RtreeCursor *p, int i, int j){ + RtreeSearchPoint t = p->aPoint[i]; + assert( iaPoint[i] = p->aPoint[j]; + p->aPoint[j] = t; + i++; j++; + if( i=RTREE_CACHE_SZ ){ + nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]); + p->aNode[i] = 0; + }else{ + RtreeNode *pTemp = p->aNode[i]; + p->aNode[i] = p->aNode[j]; + p->aNode[j] = pTemp; + } + } +} + +/* +** Return the search point with the lowest current score. +*/ +static RtreeSearchPoint *rtreeSearchPointFirst(RtreeCursor *pCur){ + return pCur->bPoint ? &pCur->sPoint : pCur->nPoint ? pCur->aPoint : 0; +} + +/* +** Get the RtreeNode for the search point with the lowest score. +*/ +static RtreeNode *rtreeNodeOfFirstSearchPoint(RtreeCursor *pCur, int *pRC){ + sqlite3_int64 id; + int ii = 1 - pCur->bPoint; + assert( ii==0 || ii==1 ); + assert( pCur->bPoint || pCur->nPoint ); + if( pCur->aNode[ii]==0 ){ + assert( pRC!=0 ); + id = ii ? pCur->aPoint[0].id : pCur->sPoint.id; + *pRC = nodeAcquire(RTREE_OF_CURSOR(pCur), id, 0, &pCur->aNode[ii]); + } + return pCur->aNode[ii]; +} + +/* +** Push a new element onto the priority queue +*/ +static RtreeSearchPoint *rtreeEnqueue( + RtreeCursor *pCur, /* The cursor */ + RtreeDValue rScore, /* Score for the new search point */ + u8 iLevel /* Level for the new search point */ +){ + int i, j; + RtreeSearchPoint *pNew; + if( pCur->nPoint>=pCur->nPointAlloc ){ + int nNew = pCur->nPointAlloc*2 + 8; + pNew = sqlite3_realloc(pCur->aPoint, nNew*sizeof(pCur->aPoint[0])); + if( pNew==0 ) return 0; + pCur->aPoint = pNew; + pCur->nPointAlloc = nNew; + } + i = pCur->nPoint++; + pNew = pCur->aPoint + i; + pNew->rScore = rScore; + pNew->iLevel = iLevel; + assert( iLevel>=0 && iLevel<=RTREE_MAX_DEPTH ); + while( i>0 ){ + RtreeSearchPoint *pParent; + j = (i-1)/2; + pParent = pCur->aPoint + j; + if( rtreeSearchPointCompare(pNew, pParent)>=0 ) break; + rtreeSearchPointSwap(pCur, j, i); + i = j; + pNew = pParent; + } + return pNew; +} + +/* +** Allocate a new RtreeSearchPoint and return a pointer to it. Return +** NULL if malloc fails. +*/ +static RtreeSearchPoint *rtreeSearchPointNew( + RtreeCursor *pCur, /* The cursor */ + RtreeDValue rScore, /* Score for the new search point */ + u8 iLevel /* Level for the new search point */ +){ + RtreeSearchPoint *pNew, *pFirst; + pFirst = rtreeSearchPointFirst(pCur); + pCur->anQueue[iLevel]++; + if( pFirst==0 + || pFirst->rScore>rScore + || (pFirst->rScore==rScore && pFirst->iLevel>iLevel) + ){ + if( pCur->bPoint ){ + int ii; + pNew = rtreeEnqueue(pCur, rScore, iLevel); + if( pNew==0 ) return 0; + ii = (int)(pNew - pCur->aPoint) + 1; + if( iiaNode[ii]==0 ); + pCur->aNode[ii] = pCur->aNode[0]; + }else{ + nodeRelease(RTREE_OF_CURSOR(pCur), pCur->aNode[0]); + } + pCur->aNode[0] = 0; + *pNew = pCur->sPoint; + } + pCur->sPoint.rScore = rScore; + pCur->sPoint.iLevel = iLevel; + pCur->bPoint = 1; + return &pCur->sPoint; + }else{ + return rtreeEnqueue(pCur, rScore, iLevel); + } +} + +#if 0 +/* Tracing routines for the RtreeSearchPoint queue */ +static void tracePoint(RtreeSearchPoint *p, int idx, RtreeCursor *pCur){ + if( idx<0 ){ printf(" s"); }else{ printf("%2d", idx); } + printf(" %d.%05lld.%02d %g %d", + p->iLevel, p->id, p->iCell, p->rScore, p->eWithin + ); + idx++; + if( idxaNode[idx]); + }else{ + printf("\n"); + } +} +static void traceQueue(RtreeCursor *pCur, const char *zPrefix){ + int ii; + printf("=== %9s ", zPrefix); + if( pCur->bPoint ){ + tracePoint(&pCur->sPoint, -1, pCur); + } + for(ii=0; iinPoint; ii++){ + if( ii>0 || pCur->bPoint ) printf(" "); + tracePoint(&pCur->aPoint[ii], ii, pCur); + } +} +# define RTREE_QUEUE_TRACE(A,B) traceQueue(A,B) +#else +# define RTREE_QUEUE_TRACE(A,B) /* no-op */ +#endif + +/* Remove the search point with the lowest current score. +*/ +static void rtreeSearchPointPop(RtreeCursor *p){ + int i, j, k, n; + i = 1 - p->bPoint; + assert( i==0 || i==1 ); + if( p->aNode[i] ){ + nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]); + p->aNode[i] = 0; + } + if( p->bPoint ){ + p->anQueue[p->sPoint.iLevel]--; + p->bPoint = 0; + }else if( p->nPoint ){ + p->anQueue[p->aPoint[0].iLevel]--; + n = --p->nPoint; + p->aPoint[0] = p->aPoint[n]; + if( naNode[1] = p->aNode[n+1]; + p->aNode[n+1] = 0; + } + i = 0; + while( (j = i*2+1)aPoint[k], &p->aPoint[j])<0 ){ + if( rtreeSearchPointCompare(&p->aPoint[k], &p->aPoint[i])<0 ){ + rtreeSearchPointSwap(p, i, k); + i = k; + }else{ + break; + } + }else{ + if( rtreeSearchPointCompare(&p->aPoint[j], &p->aPoint[i])<0 ){ + rtreeSearchPointSwap(p, i, j); + i = j; + }else{ + break; } } - pCsr->pNode = pNode->pParent; - rc = nodeParentIndex(pRtree, pNode, &pCsr->iCell); - if( rc!=SQLITE_OK ){ - return rc; - } - nodeReference(pCsr->pNode); - nodeRelease(pRtree, pNode); - iHeight++; } } +} + + +/* +** Continue the search on cursor pCur until the front of the queue +** contains an entry suitable for returning as a result-set row, +** or until the RtreeSearchPoint queue is empty, indicating that the +** query has completed. +*/ +static int rtreeStepToLeaf(RtreeCursor *pCur){ + RtreeSearchPoint *p; + Rtree *pRtree = RTREE_OF_CURSOR(pCur); + RtreeNode *pNode; + int eWithin; + int rc = SQLITE_OK; + int nCell; + int nConstraint = pCur->nConstraint; + int ii; + int eInt; + RtreeSearchPoint x; + eInt = pRtree->eCoordType==RTREE_COORD_INT32; + while( (p = rtreeSearchPointFirst(pCur))!=0 && p->iLevel>0 ){ + pNode = rtreeNodeOfFirstSearchPoint(pCur, &rc); + if( rc ) return rc; + nCell = NCELL(pNode); + assert( nCell<200 ); + while( p->iCellzData + (4+pRtree->nBytesPerCell*p->iCell); + eWithin = FULLY_WITHIN; + for(ii=0; iiaConstraint + ii; + if( pConstraint->op>=RTREE_MATCH ){ + rc = rtreeCallbackConstraint(pConstraint, eInt, pCellData, p, + &rScore, &eWithin); + if( rc ) return rc; + }else if( p->iLevel==1 ){ + rtreeLeafConstraint(pConstraint, eInt, pCellData, &eWithin); + }else{ + rtreeNonleafConstraint(pConstraint, eInt, pCellData, &eWithin); + } + if( eWithin==NOT_WITHIN ) break; + } + p->iCell++; + if( eWithin==NOT_WITHIN ) continue; + x.iLevel = p->iLevel - 1; + if( x.iLevel ){ + x.id = readInt64(pCellData); + x.iCell = 0; + }else{ + x.id = p->id; + x.iCell = p->iCell - 1; + } + if( p->iCell>=nCell ){ + RTREE_QUEUE_TRACE(pCur, "POP-S:"); + rtreeSearchPointPop(pCur); + } + if( rScoreeWithin = eWithin; + p->id = x.id; + p->iCell = x.iCell; + RTREE_QUEUE_TRACE(pCur, "PUSH-S:"); + break; + } + if( p->iCell>=nCell ){ + RTREE_QUEUE_TRACE(pCur, "POP-Se:"); + rtreeSearchPointPop(pCur); + } + } + pCur->atEOF = p==0; + return SQLITE_OK; +} + +/* +** Rtree virtual table module xNext method. +*/ +static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){ + RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; + int rc = SQLITE_OK; + + /* Move to the next entry that matches the configured constraints. */ + RTREE_QUEUE_TRACE(pCsr, "POP-Nx:"); + rtreeSearchPointPop(pCsr); + rc = rtreeStepToLeaf(pCsr); return rc; } @@ -125505,13 +148868,14 @@ static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){ ** Rtree virtual table module xRowid method. */ static int rtreeRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *pRowid){ - Rtree *pRtree = (Rtree *)pVtabCursor->pVtab; RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - - assert(pCsr->pNode); - *pRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell); - - return SQLITE_OK; + RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr); + int rc = SQLITE_OK; + RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc); + if( rc==SQLITE_OK && p ){ + *pRowid = nodeGetRowid(RTREE_OF_CURSOR(pCsr), pNode, p->iCell); + } + return rc; } /* @@ -125520,21 +148884,28 @@ static int rtreeRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *pRowid){ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ Rtree *pRtree = (Rtree *)cur->pVtab; RtreeCursor *pCsr = (RtreeCursor *)cur; + RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr); + RtreeCoord c; + int rc = SQLITE_OK; + RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc); + if( rc ) return rc; + if( p==0 ) return SQLITE_OK; if( i==0 ){ - i64 iRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell); - sqlite3_result_int64(ctx, iRowid); + sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell)); }else{ - RtreeCoord c; - nodeGetCoord(pRtree, pCsr->pNode, pCsr->iCell, i-1, &c); + if( rc ) return rc; + nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c); +#ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ sqlite3_result_double(ctx, c.f); - }else{ + }else +#endif + { assert( pRtree->eCoordType==RTREE_COORD_INT32 ); sqlite3_result_int(ctx, c.i); } } - return SQLITE_OK; } @@ -125545,12 +148916,18 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ ** *ppLeaf to 0 and return SQLITE_OK. If an error occurs, set *ppLeaf ** to zero and return an SQLite error code. */ -static int findLeafNode(Rtree *pRtree, i64 iRowid, RtreeNode **ppLeaf){ +static int findLeafNode( + Rtree *pRtree, /* RTree to search */ + i64 iRowid, /* The rowid searching for */ + RtreeNode **ppLeaf, /* Write the node here */ + sqlite3_int64 *piNode /* Write the node-id here */ +){ int rc; *ppLeaf = 0; sqlite3_bind_int64(pRtree->pReadRowid, 1, iRowid); if( sqlite3_step(pRtree->pReadRowid)==SQLITE_ROW ){ i64 iNode = sqlite3_column_int64(pRtree->pReadRowid, 0); + if( piNode ) *piNode = iNode; rc = nodeAcquire(pRtree, iNode, 0, ppLeaf); sqlite3_reset(pRtree->pReadRowid); }else{ @@ -125566,42 +148943,45 @@ static int findLeafNode(Rtree *pRtree, i64 iRowid, RtreeNode **ppLeaf){ ** operator. */ static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){ - RtreeMatchArg *p; - sqlite3_rtree_geometry *pGeom; - int nBlob; + RtreeMatchArg *pBlob; /* BLOB returned by geometry function */ + sqlite3_rtree_query_info *pInfo; /* Callback information */ + int nBlob; /* Size of the geometry function blob */ + int nExpected; /* Expected size of the BLOB */ /* Check that value is actually a blob. */ - if( !sqlite3_value_type(pValue)==SQLITE_BLOB ) return SQLITE_ERROR; + if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR; /* Check that the blob is roughly the right size. */ nBlob = sqlite3_value_bytes(pValue); if( nBlob<(int)sizeof(RtreeMatchArg) - || ((nBlob-sizeof(RtreeMatchArg))%sizeof(double))!=0 + || ((nBlob-sizeof(RtreeMatchArg))%sizeof(RtreeDValue))!=0 ){ return SQLITE_ERROR; } - pGeom = (sqlite3_rtree_geometry *)sqlite3_malloc( - sizeof(sqlite3_rtree_geometry) + nBlob - ); - if( !pGeom ) return SQLITE_NOMEM; - memset(pGeom, 0, sizeof(sqlite3_rtree_geometry)); - p = (RtreeMatchArg *)&pGeom[1]; + pInfo = (sqlite3_rtree_query_info*)sqlite3_malloc( sizeof(*pInfo)+nBlob ); + if( !pInfo ) return SQLITE_NOMEM; + memset(pInfo, 0, sizeof(*pInfo)); + pBlob = (RtreeMatchArg*)&pInfo[1]; - memcpy(p, sqlite3_value_blob(pValue), nBlob); - if( p->magic!=RTREE_GEOMETRY_MAGIC - || nBlob!=(int)(sizeof(RtreeMatchArg) + (p->nParam-1)*sizeof(double)) - ){ - sqlite3_free(pGeom); + memcpy(pBlob, sqlite3_value_blob(pValue), nBlob); + nExpected = (int)(sizeof(RtreeMatchArg) + + (pBlob->nParam-1)*sizeof(RtreeDValue)); + if( pBlob->magic!=RTREE_GEOMETRY_MAGIC || nBlob!=nExpected ){ + sqlite3_free(pInfo); return SQLITE_ERROR; } + pInfo->pContext = pBlob->cb.pContext; + pInfo->nParam = pBlob->nParam; + pInfo->aParam = pBlob->aParam; - pGeom->pContext = p->pContext; - pGeom->nParam = p->nParam; - pGeom->aParam = p->aParam; - - pCons->xGeom = p->xGeom; - pCons->pGeom = pGeom; + if( pBlob->cb.xGeom ){ + pCons->u.xGeom = pBlob->cb.xGeom; + }else{ + pCons->op = RTREE_QUERY; + pCons->u.xQueryFunc = pBlob->cb.xQueryFunc; + } + pCons->pInfo = pInfo; return SQLITE_OK; } @@ -125615,43 +148995,59 @@ static int rtreeFilter( ){ Rtree *pRtree = (Rtree *)pVtabCursor->pVtab; RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - RtreeNode *pRoot = 0; int ii; int rc = SQLITE_OK; + int iCell = 0; rtreeReference(pRtree); + /* Reset the cursor to the same state as rtreeOpen() leaves it in. */ freeCursorConstraints(pCsr); - pCsr->iStrategy = idxNum; + sqlite3_free(pCsr->aPoint); + memset(pCsr, 0, sizeof(RtreeCursor)); + pCsr->base.pVtab = (sqlite3_vtab*)pRtree; + pCsr->iStrategy = idxNum; if( idxNum==1 ){ /* Special case - lookup by rowid. */ RtreeNode *pLeaf; /* Leaf on which the required cell resides */ + RtreeSearchPoint *p; /* Search point for the the leaf */ i64 iRowid = sqlite3_value_int64(argv[0]); - rc = findLeafNode(pRtree, iRowid, &pLeaf); - pCsr->pNode = pLeaf; - if( pLeaf ){ - assert( rc==SQLITE_OK ); - rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &pCsr->iCell); + i64 iNode = 0; + rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode); + if( rc==SQLITE_OK && pLeaf!=0 ){ + p = rtreeSearchPointNew(pCsr, RTREE_ZERO, 0); + assert( p!=0 ); /* Always returns pCsr->sPoint */ + pCsr->aNode[0] = pLeaf; + p->id = iNode; + p->eWithin = PARTLY_WITHIN; + rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &iCell); + p->iCell = iCell; + RTREE_QUEUE_TRACE(pCsr, "PUSH-F1:"); + }else{ + pCsr->atEOF = 1; } }else{ /* Normal case - r-tree scan. Set up the RtreeCursor.aConstraint array ** with the configured constraints. */ - if( argc>0 ){ + rc = nodeAcquire(pRtree, 1, 0, &pRoot); + if( rc==SQLITE_OK && argc>0 ){ pCsr->aConstraint = sqlite3_malloc(sizeof(RtreeConstraint)*argc); pCsr->nConstraint = argc; if( !pCsr->aConstraint ){ rc = SQLITE_NOMEM; }else{ memset(pCsr->aConstraint, 0, sizeof(RtreeConstraint)*argc); - assert( (idxStr==0 && argc==0) || (int)strlen(idxStr)==argc*2 ); + memset(pCsr->anQueue, 0, sizeof(u32)*(pRtree->iDepth + 1)); + assert( (idxStr==0 && argc==0) + || (idxStr && (int)strlen(idxStr)==argc*2) ); for(ii=0; iiaConstraint[ii]; p->op = idxStr[ii*2]; - p->iCoord = idxStr[ii*2+1]-'a'; - if( p->op==RTREE_MATCH ){ + p->iCoord = idxStr[ii*2+1]-'0'; + if( p->op>=RTREE_MATCH ){ /* A MATCH operator. The right-hand-side must be a blob that ** can be cast into an RtreeMatchArg object. One created using ** an sqlite3_rtree_geometry_callback() SQL user function. @@ -125660,41 +149056,52 @@ static int rtreeFilter( if( rc!=SQLITE_OK ){ break; } + p->pInfo->nCoord = pRtree->nDim*2; + p->pInfo->anQueue = pCsr->anQueue; + p->pInfo->mxLevel = pRtree->iDepth + 1; }else{ - p->rValue = sqlite3_value_double(argv[ii]); +#ifdef SQLITE_RTREE_INT_ONLY + p->u.rValue = sqlite3_value_int64(argv[ii]); +#else + p->u.rValue = sqlite3_value_double(argv[ii]); +#endif } } } } - - if( rc==SQLITE_OK ){ - pCsr->pNode = 0; - rc = nodeAcquire(pRtree, 1, 0, &pRoot); - } if( rc==SQLITE_OK ){ - int isEof = 1; - int nCell = NCELL(pRoot); - pCsr->pNode = pRoot; - for(pCsr->iCell=0; rc==SQLITE_OK && pCsr->iCelliCell++){ - assert( pCsr->pNode==pRoot ); - rc = descendToCell(pRtree, pCsr, pRtree->iDepth, &isEof); - if( !isEof ){ - break; - } - } - if( rc==SQLITE_OK && isEof ){ - assert( pCsr->pNode==pRoot ); - nodeRelease(pRtree, pRoot); - pCsr->pNode = 0; - } - assert( rc!=SQLITE_OK || !pCsr->pNode || pCsr->iCellpNode) ); + RtreeSearchPoint *pNew; + pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, pRtree->iDepth+1); + if( pNew==0 ) return SQLITE_NOMEM; + pNew->id = 1; + pNew->iCell = 0; + pNew->eWithin = PARTLY_WITHIN; + assert( pCsr->bPoint==1 ); + pCsr->aNode[0] = pRoot; + pRoot = 0; + RTREE_QUEUE_TRACE(pCsr, "PUSH-Fm:"); + rc = rtreeStepToLeaf(pCsr); } } + nodeRelease(pRtree, pRoot); rtreeRelease(pRtree); return rc; } +/* +** Set the pIdxInfo->estimatedRows variable to nRow. Unless this +** extension is currently being used by a version of SQLite too old to +** support estimatedRows. In that case this function is a no-op. +*/ +static void setEstimatedRows(sqlite3_index_info *pIdxInfo, i64 nRow){ +#if SQLITE_VERSION_NUMBER>=3008002 + if( sqlite3_libversion_number()>=3008002 ){ + pIdxInfo->estimatedRows = nRow; + } +#endif +} + /* ** Rtree virtual table module xBestIndex method. There are three ** table scan strategies to choose from (in order from most to @@ -125730,13 +149137,14 @@ static int rtreeFilter( ** is 'a', the second from the left 'b' etc. */ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + Rtree *pRtree = (Rtree*)tab; int rc = SQLITE_OK; int ii; + i64 nRow; /* Estimated rows returned by this scan */ int iIdx = 0; char zIdxStr[RTREE_MAX_DIMENSIONS*8+1]; memset(zIdxStr, 0, sizeof(zIdxStr)); - UNUSED_PARAMETER(tab); assert( pIdxInfo->idxStr==0 ); for(ii=0; iinConstraint && iIdx<(int)(sizeof(zIdxStr)-1); ii++){ @@ -125756,9 +149164,11 @@ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ /* This strategy involves a two rowid lookups on an B-Tree structures ** and then a linear search of an R-Tree node. This should be ** considered almost as quick as a direct rowid lookup (for which - ** sqlite uses an internal cost of 0.0). + ** sqlite uses an internal cost of 0.0). It is expected to return + ** a single row. */ - pIdxInfo->estimatedCost = 10.0; + pIdxInfo->estimatedCost = 30.0; + setEstimatedRows(pIdxInfo, 1); return SQLITE_OK; } @@ -125776,7 +149186,7 @@ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ break; } zIdxStr[iIdx++] = op; - zIdxStr[iIdx++] = p->iColumn - 1 + 'a'; + zIdxStr[iIdx++] = p->iColumn - 1 + '0'; pIdxInfo->aConstraintUsage[ii].argvIndex = (iIdx/2); pIdxInfo->aConstraintUsage[ii].omit = 1; } @@ -125787,19 +149197,22 @@ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ if( iIdx>0 && 0==(pIdxInfo->idxStr = sqlite3_mprintf("%s", zIdxStr)) ){ return SQLITE_NOMEM; } - assert( iIdx>=0 ); - pIdxInfo->estimatedCost = (2000000.0 / (double)(iIdx + 1)); + + nRow = pRtree->nRowEst / (iIdx + 1); + pIdxInfo->estimatedCost = (double)6.0 * (double)nRow; + setEstimatedRows(pIdxInfo, nRow); + return rc; } /* ** Return the N-dimensional volumn of the cell stored in *p. */ -static float cellArea(Rtree *pRtree, RtreeCell *p){ - float area = 1.0; +static RtreeDValue cellArea(Rtree *pRtree, RtreeCell *p){ + RtreeDValue area = (RtreeDValue)1; int ii; for(ii=0; ii<(pRtree->nDim*2); ii+=2){ - area = (float)(area * (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]))); + area = (area * (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]))); } return area; } @@ -125808,11 +149221,11 @@ static float cellArea(Rtree *pRtree, RtreeCell *p){ ** Return the margin length of cell p. The margin length is the sum ** of the objects size in each dimension. */ -static float cellMargin(Rtree *pRtree, RtreeCell *p){ - float margin = 0.0; +static RtreeDValue cellMargin(Rtree *pRtree, RtreeCell *p){ + RtreeDValue margin = (RtreeDValue)0; int ii; for(ii=0; ii<(pRtree->nDim*2); ii+=2){ - margin += (float)(DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii])); + margin += (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii])); } return margin; } @@ -125857,8 +149270,8 @@ static int cellContains(Rtree *pRtree, RtreeCell *p1, RtreeCell *p2){ /* ** Return the amount cell p would grow by if it were unioned with pCell. */ -static float cellGrowth(Rtree *pRtree, RtreeCell *p, RtreeCell *pCell){ - float area; +static RtreeDValue cellGrowth(Rtree *pRtree, RtreeCell *p, RtreeCell *pCell){ + RtreeDValue area; RtreeCell cell; memcpy(&cell, p, sizeof(RtreeCell)); area = cellArea(pRtree, &cell); @@ -125866,64 +149279,32 @@ static float cellGrowth(Rtree *pRtree, RtreeCell *p, RtreeCell *pCell){ return (cellArea(pRtree, &cell)-area); } -#if VARIANT_RSTARTREE_CHOOSESUBTREE || VARIANT_RSTARTREE_SPLIT -static float cellOverlap( +static RtreeDValue cellOverlap( Rtree *pRtree, RtreeCell *p, RtreeCell *aCell, - int nCell, - int iExclude + int nCell ){ int ii; - float overlap = 0.0; + RtreeDValue overlap = RTREE_ZERO; for(ii=0; iinDim*2); jj+=2){ - double x1; - double x2; - - x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj])); - x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1])); - - if( x2nDim*2); jj+=2){ + RtreeDValue x1, x2; + x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj])); + x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1])); + if( x2iDepth-1) ){ - int jj; - aCell = sqlite3_malloc(sizeof(RtreeCell)*nCell); - if( !aCell ){ - rc = SQLITE_NOMEM; - nodeRelease(pRtree, pNode); - pNode = 0; - continue; - } - for(jj=0; jjiDepth-1) ){ - overlap = cellOverlapEnlargement(pRtree,&cell,pCell,aCell,nCell,iCell); - } - if( (iCell==0) - || (overlapnDim; i++){ - float x1 = DCOORD(aCell[0].aCoord[i*2]); - float x2 = DCOORD(aCell[0].aCoord[i*2+1]); - float x3 = x1; - float x4 = x2; - int jj; - - int iCellLeft = 0; - int iCellRight = 0; - - for(jj=1; jjx4 ) x4 = right; - if( left>x3 ){ - x3 = left; - iCellRight = jj; - } - if( rightmaxNormalInnerWidth ){ - iLeftSeed = iCellLeft; - iRightSeed = iCellRight; - } - } - } - - *piLeftSeed = iLeftSeed; - *piRightSeed = iRightSeed; -} -#endif /* VARIANT_GUTTMAN_LINEAR_SPLIT */ - -#if VARIANT_GUTTMAN_QUADRATIC_SPLIT -/* -** Implementation of the quadratic variant of the PickNext() function from -** Guttman[84]. -*/ -static RtreeCell *QuadraticPickNext( - Rtree *pRtree, - RtreeCell *aCell, - int nCell, - RtreeCell *pLeftBox, - RtreeCell *pRightBox, - int *aiUsed -){ - #define FABS(a) ((a)<0.0?-1.0*(a):(a)) - - int iSelect = -1; - float fDiff; - int ii; - for(ii=0; iifDiff ){ - fDiff = diff; - iSelect = ii; - } - } - } - aiUsed[iSelect] = 1; - return &aCell[iSelect]; -} - -/* -** Implementation of the quadratic variant of the PickSeeds() function from -** Guttman[84]. -*/ -static void QuadraticPickSeeds( - Rtree *pRtree, - RtreeCell *aCell, - int nCell, - int *piLeftSeed, - int *piRightSeed -){ - int ii; - int jj; - - int iLeftSeed = 0; - int iRightSeed = 1; - float fWaste = 0.0; - - for(ii=0; iifWaste ){ - iLeftSeed = ii; - iRightSeed = jj; - fWaste = waste; - } - } - } - - *piLeftSeed = iLeftSeed; - *piRightSeed = iRightSeed; -} -#endif /* VARIANT_GUTTMAN_QUADRATIC_SPLIT */ /* ** Arguments aIdx, aDistance and aSpare all point to arrays of size @@ -126241,7 +149440,7 @@ static void QuadraticPickSeeds( static void SortByDistance( int *aIdx, int nIdx, - float *aDistance, + RtreeDValue *aDistance, int *aSpare ){ if( nIdx>1 ){ @@ -126267,8 +149466,8 @@ static void SortByDistance( aIdx[iLeft+iRight] = aLeft[iLeft]; iLeft++; }else{ - float fLeft = aDistance[aLeft[iLeft]]; - float fRight = aDistance[aRight[iRight]]; + RtreeDValue fLeft = aDistance[aLeft[iLeft]]; + RtreeDValue fRight = aDistance[aRight[iRight]]; if( fLeftnDim+1)*(sizeof(int*)+nCell*sizeof(int)); @@ -126400,9 +149598,9 @@ static int splitNodeStartree( } for(ii=0; iinDim; ii++){ - float margin = 0.0; - float fBestOverlap = 0.0; - float fBestArea = 0.0; + RtreeDValue margin = RTREE_ZERO; + RtreeDValue fBestOverlap = RTREE_ZERO; + RtreeDValue fBestArea = RTREE_ZERO; int iBestLeft = 0; int nLeft; @@ -126414,8 +149612,8 @@ static int splitNodeStartree( RtreeCell left; RtreeCell right; int kk; - float overlap; - float area; + RtreeDValue overlap; + RtreeDValue area; memcpy(&left, &aCell[aaSorted[ii][0]], sizeof(RtreeCell)); memcpy(&right, &aCell[aaSorted[ii][nCell-1]], sizeof(RtreeCell)); @@ -126428,7 +149626,7 @@ static int splitNodeStartree( } margin += cellMargin(pRtree, &left); margin += cellMargin(pRtree, &right); - overlap = cellOverlap(pRtree, &left, &right, 1, -1); + overlap = cellOverlap(pRtree, &left, &right, 1); area = cellArea(pRtree, &left) + cellArea(pRtree, &right); if( (nLeft==RTREE_MINCELLS(pRtree)) || (overlap0; i--){ - RtreeCell *pNext; - pNext = PickNext(pRtree, aCell, nCell, pBboxLeft, pBboxRight, aiUsed); - float diff = - cellGrowth(pRtree, pBboxLeft, pNext) - - cellGrowth(pRtree, pBboxRight, pNext) - ; - if( (RTREE_MINCELLS(pRtree)-NCELL(pRight)==i) - || (diff>0.0 && (RTREE_MINCELLS(pRtree)-NCELL(pLeft)!=i)) - ){ - nodeInsertCell(pRtree, pRight, pNext); - cellUnion(pRtree, pBboxRight, pNext); - }else{ - nodeInsertCell(pRtree, pLeft, pNext); - cellUnion(pRtree, pBboxLeft, pNext); - } - } - sqlite3_free(aiUsed); - return SQLITE_OK; -} -#endif static int updateMapping( Rtree *pRtree, @@ -126594,7 +149736,8 @@ static int SplitNode( memset(pLeft->zData, 0, pRtree->iNodeSize); memset(pRight->zData, 0, pRtree->iNodeSize); - rc = AssignCells(pRtree, aCell, nCell, pLeft, pRight, &leftbbox, &rightbbox); + rc = splitNodeStartree(pRtree, aCell, nCell, pLeft, pRight, + &leftbbox, &rightbbox); if( rc!=SQLITE_OK ){ goto splitnode_out; } @@ -126831,32 +149974,34 @@ static int Reinsert( int *aOrder; int *aSpare; RtreeCell *aCell; - float *aDistance; + RtreeDValue *aDistance; int nCell; - float aCenterCoord[RTREE_MAX_DIMENSIONS]; + RtreeDValue aCenterCoord[RTREE_MAX_DIMENSIONS]; int iDim; int ii; int rc = SQLITE_OK; + int n; - memset(aCenterCoord, 0, sizeof(float)*RTREE_MAX_DIMENSIONS); + memset(aCenterCoord, 0, sizeof(RtreeDValue)*RTREE_MAX_DIMENSIONS); nCell = NCELL(pNode)+1; + n = (nCell+1)&(~1); /* Allocate the buffers used by this operation. The allocation is ** relinquished before this function returns. */ - aCell = (RtreeCell *)sqlite3_malloc(nCell * ( - sizeof(RtreeCell) + /* aCell array */ - sizeof(int) + /* aOrder array */ - sizeof(int) + /* aSpare array */ - sizeof(float) /* aDistance array */ + aCell = (RtreeCell *)sqlite3_malloc(n * ( + sizeof(RtreeCell) + /* aCell array */ + sizeof(int) + /* aOrder array */ + sizeof(int) + /* aSpare array */ + sizeof(RtreeDValue) /* aDistance array */ )); if( !aCell ){ return SQLITE_NOMEM; } - aOrder = (int *)&aCell[nCell]; - aSpare = (int *)&aOrder[nCell]; - aDistance = (float *)&aSpare[nCell]; + aOrder = (int *)&aCell[n]; + aSpare = (int *)&aOrder[n]; + aDistance = (RtreeDValue *)&aSpare[n]; for(ii=0; iinDim; iDim++){ - aCenterCoord[iDim] += (float)DCOORD(aCell[ii].aCoord[iDim*2]); - aCenterCoord[iDim] += (float)DCOORD(aCell[ii].aCoord[iDim*2+1]); + aCenterCoord[iDim] += DCOORD(aCell[ii].aCoord[iDim*2]); + aCenterCoord[iDim] += DCOORD(aCell[ii].aCoord[iDim*2+1]); } } for(iDim=0; iDimnDim; iDim++){ - aCenterCoord[iDim] = (float)(aCenterCoord[iDim]/((float)nCell*2.0)); + aCenterCoord[iDim] = (aCenterCoord[iDim]/(nCell*(RtreeDValue)2)); } for(ii=0; iinDim; iDim++){ - float coord = (float)(DCOORD(aCell[ii].aCoord[iDim*2+1]) - - DCOORD(aCell[ii].aCoord[iDim*2])); + RtreeDValue coord = (DCOORD(aCell[ii].aCoord[iDim*2+1]) - + DCOORD(aCell[ii].aCoord[iDim*2])); aDistance[ii] += (coord-aCenterCoord[iDim])*(coord-aCenterCoord[iDim]); } } @@ -126941,16 +150086,12 @@ static int rtreeInsertCell( } } if( nodeInsertCell(pRtree, pNode, pCell) ){ -#if VARIANT_RSTARTREE_REINSERT if( iHeight<=pRtree->iReinsertHeight || pNode->iNode==1){ rc = SplitNode(pRtree, pNode, pCell, iHeight); }else{ pRtree->iReinsertHeight = iHeight; rc = Reinsert(pRtree, pNode, pCell, iHeight); } -#else - rc = SplitNode(pRtree, pNode, pCell, iHeight); -#endif }else{ rc = AdjustTree(pRtree, pNode, pCell); if( rc==SQLITE_OK ){ @@ -127008,19 +150149,19 @@ static int newRowid(Rtree *pRtree, i64 *piRowid){ */ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){ int rc; /* Return code */ - RtreeNode *pLeaf; /* Leaf node containing record iDelete */ + RtreeNode *pLeaf = 0; /* Leaf node containing record iDelete */ int iCell; /* Index of iDelete cell in pLeaf */ RtreeNode *pRoot; /* Root node of rtree structure */ - /* Obtain a reference to the root node to initialise Rtree.iDepth */ + /* Obtain a reference to the root node to initialize Rtree.iDepth */ rc = nodeAcquire(pRtree, 1, 0, &pRoot); /* Obtain a reference to the leaf node that contains the entry ** about to be deleted. */ if( rc==SQLITE_OK ){ - rc = findLeafNode(pRtree, iDelete, &pLeaf); + rc = findLeafNode(pRtree, iDelete, &pLeaf, 0); } /* Delete the cell in question from the leaf node. */ @@ -127087,6 +150228,36 @@ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){ return rc; } +/* +** Rounding constants for float->double conversion. +*/ +#define RNDTOWARDS (1.0 - 1.0/8388608.0) /* Round towards zero */ +#define RNDAWAY (1.0 + 1.0/8388608.0) /* Round away from zero */ + +#if !defined(SQLITE_RTREE_INT_ONLY) +/* +** Convert an sqlite3_value into an RtreeValue (presumably a float) +** while taking care to round toward negative or positive, respectively. +*/ +static RtreeValue rtreeValueDown(sqlite3_value *v){ + double d = sqlite3_value_double(v); + float f = (float)d; + if( f>d ){ + f = (float)(d*(d<0 ? RNDAWAY : RNDTOWARDS)); + } + return f; +} +static RtreeValue rtreeValueUp(sqlite3_value *v){ + double d = sqlite3_value_double(v); + float f = (float)d; + if( fnDim*2 + 3) ); +#ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ for(ii=0; ii<(pRtree->nDim*2); ii+=2){ - cell.aCoord[ii].f = (float)sqlite3_value_double(azData[ii+3]); - cell.aCoord[ii+1].f = (float)sqlite3_value_double(azData[ii+4]); + cell.aCoord[ii].f = rtreeValueDown(azData[ii+3]); + cell.aCoord[ii+1].f = rtreeValueUp(azData[ii+4]); if( cell.aCoord[ii].f>cell.aCoord[ii+1].f ){ rc = SQLITE_CONSTRAINT; goto constraint; } } - }else{ + }else +#endif + { for(ii=0; ii<(pRtree->nDim*2); ii+=2){ cell.aCoord[ii].i = sqlite3_value_int(azData[ii+3]); cell.aCoord[ii+1].i = sqlite3_value_int(azData[ii+4]); @@ -127178,7 +150352,7 @@ static int rtreeUpdate( */ if( rc==SQLITE_OK && nData>1 ){ /* Insert the new record into the r-tree */ - RtreeNode *pLeaf; + RtreeNode *pLeaf = 0; /* Figure out the rowid of the new row. */ if( bHaveRowid==0 ){ @@ -127226,6 +150400,43 @@ static int rtreeRename(sqlite3_vtab *pVtab, const char *zNewName){ return rc; } +/* +** This function populates the pRtree->nRowEst variable with an estimate +** of the number of rows in the virtual table. If possible, this is based +** on sqlite_stat1 data. Otherwise, use RTREE_DEFAULT_ROWEST. +*/ +static int rtreeQueryStat1(sqlite3 *db, Rtree *pRtree){ + const char *zFmt = "SELECT stat FROM %Q.sqlite_stat1 WHERE tbl = '%q_rowid'"; + char *zSql; + sqlite3_stmt *p; + int rc; + i64 nRow = 0; + + zSql = sqlite3_mprintf(zFmt, pRtree->zDb, pRtree->zName); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v2(db, zSql, -1, &p, 0); + if( rc==SQLITE_OK ){ + if( sqlite3_step(p)==SQLITE_ROW ) nRow = sqlite3_column_int64(p, 0); + rc = sqlite3_finalize(p); + }else if( rc!=SQLITE_NOMEM ){ + rc = SQLITE_OK; + } + + if( rc==SQLITE_OK ){ + if( nRow==0 ){ + pRtree->nRowEst = RTREE_DEFAULT_ROWEST; + }else{ + pRtree->nRowEst = MAX(nRow, RTREE_MIN_ROWEST); + } + } + sqlite3_free(zSql); + } + + return rc; +} + static sqlite3_module rtreeModule = { 0, /* iVersion */ rtreeCreate, /* xCreate - create a table */ @@ -127287,7 +150498,8 @@ static int rtreeSqlInit( char *zCreate = sqlite3_mprintf( "CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY, data BLOB);" "CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY, nodeno INTEGER);" -"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY, parentnode INTEGER);" +"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY," + " parentnode INTEGER);" "INSERT INTO '%q'.'%q_node' VALUES(1, zeroblob(%d))", zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, pRtree->iNodeSize ); @@ -127311,6 +150523,7 @@ static int rtreeSqlInit( appStmt[7] = &pRtree->pWriteParent; appStmt[8] = &pRtree->pDeleteParent; + rc = rtreeQueryStat1(db, pRtree); for(i=0; inBytesPerCell*RTREE_MAXCELLS)iNodeSize ){ pRtree->iNodeSize = 4+pRtree->nBytesPerCell*RTREE_MAXCELLS; } + }else{ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); } }else{ zSql = sqlite3_mprintf( @@ -127384,6 +150600,9 @@ static int getNodeSize( pRtree->zDb, pRtree->zName ); rc = getIntFromStmt(db, zSql, &pRtree->iNodeSize); + if( rc!=SQLITE_OK ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + } } sqlite3_free(zSql); @@ -127429,8 +150648,8 @@ static int rtreeInit( sqlite3_vtab_config(db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1); /* Allocate the sqlite3_vtab structure */ - nDb = strlen(argv[1]); - nName = strlen(argv[2]); + nDb = (int)strlen(argv[1]); + nName = (int)strlen(argv[2]); pRtree = (Rtree *)sqlite3_malloc(sizeof(Rtree)+nDb+nName+2); if( !pRtree ){ return SQLITE_NOMEM; @@ -127447,7 +150666,7 @@ static int rtreeInit( memcpy(pRtree->zName, argv[2], nName); /* Figure out the node size to use. */ - rc = getNodeSize(db, pRtree, isCreate); + rc = getNodeSize(db, pRtree, isCreate, pzErr); /* Create/Connect to the underlying relational database schema. If ** that is successful, call sqlite3_declare_vtab() to configure @@ -127482,6 +150701,8 @@ static int rtreeInit( if( rc==SQLITE_OK ){ *ppVtab = (sqlite3_vtab *)pRtree; }else{ + assert( *ppVtab==0 ); + assert( pRtree->nBusy==1 ); rtreeRelease(pRtree); } return rc; @@ -127492,10 +150713,10 @@ static int rtreeInit( ** Implementation of a scalar function that decodes r-tree nodes to ** human readable strings. This can be used for debugging and analysis. ** -** The scalar function takes two arguments, a blob of data containing -** an r-tree node, and the number of dimensions the r-tree indexes. -** For a two-dimensional r-tree structure called "rt", to deserialize -** all nodes, a statement like: +** The scalar function takes two arguments: (1) the number of dimensions +** to the rtree (between 1 and 5, inclusive) and (2) a blob of data containing +** an r-tree node. For a two-dimensional r-tree structure called "rt", to +** deserialize all nodes, a statement like: ** ** SELECT rtreenode(2, data) FROM rt_node; ** @@ -127525,10 +150746,16 @@ static void rtreenode(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){ nodeGetCell(&tree, &node, ii, &cell); sqlite3_snprintf(512-nCell,&zCell[nCell],"%lld", cell.iRowid); - nCell = strlen(zCell); + nCell = (int)strlen(zCell); for(jj=0; jjxDestructor ) pInfo->xDestructor(pInfo->pContext); sqlite3_free(p); } /* -** Each call to sqlite3_rtree_geometry_callback() creates an ordinary SQLite -** scalar user function. This C function is the callback used for all such -** registered SQL functions. +** Each call to sqlite3_rtree_geometry_callback() or +** sqlite3_rtree_query_callback() creates an ordinary SQLite +** scalar function that is implemented by this routine. +** +** All this function does is construct an RtreeMatchArg object that +** contains the geometry-checking callback routines and a list of +** parameters to this function, then return that RtreeMatchArg object +** as a BLOB. ** -** The scalar user functions return a blob that is interpreted by r-tree -** table MATCH operators. +** The R-Tree MATCH operator will read the returned BLOB, deserialize +** the RtreeMatchArg object, and use the RtreeMatchArg object to figure +** out which elements of the R-Tree should be returned by the query. */ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){ RtreeGeomCallback *pGeomCtx = (RtreeGeomCallback *)sqlite3_user_data(ctx); RtreeMatchArg *pBlob; int nBlob; - nBlob = sizeof(RtreeMatchArg) + (nArg-1)*sizeof(double); + nBlob = sizeof(RtreeMatchArg) + (nArg-1)*sizeof(RtreeDValue); pBlob = (RtreeMatchArg *)sqlite3_malloc(nBlob); if( !pBlob ){ sqlite3_result_error_nomem(ctx); }else{ int i; pBlob->magic = RTREE_GEOMETRY_MAGIC; - pBlob->xGeom = pGeomCtx->xGeom; - pBlob->pContext = pGeomCtx->pContext; + pBlob->cb = pGeomCtx[0]; pBlob->nParam = nArg; for(i=0; iaParam[i] = sqlite3_value_int64(aArg[i]); +#else pBlob->aParam[i] = sqlite3_value_double(aArg[i]); +#endif } - sqlite3_result_blob(ctx, pBlob, nBlob, doSqlite3Free); + sqlite3_result_blob(ctx, pBlob, nBlob, sqlite3_free); } } @@ -127624,10 +150876,10 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){ ** Register a new geometry function for use with the r-tree MATCH operator. */ SQLITE_API int sqlite3_rtree_geometry_callback( - sqlite3 *db, - const char *zGeom, - int (*xGeom)(sqlite3_rtree_geometry *, int, double *, int *), - void *pContext + sqlite3 *db, /* Register SQL function on this connection */ + const char *zGeom, /* Name of the new SQL function */ + int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*), /* Callback */ + void *pContext /* Extra data associated with the callback */ ){ RtreeGeomCallback *pGeomCtx; /* Context object for new user-function */ @@ -127635,17 +150887,44 @@ SQLITE_API int sqlite3_rtree_geometry_callback( pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback)); if( !pGeomCtx ) return SQLITE_NOMEM; pGeomCtx->xGeom = xGeom; + pGeomCtx->xQueryFunc = 0; + pGeomCtx->xDestructor = 0; pGeomCtx->pContext = pContext; - - /* Create the new user-function. Register a destructor function to delete - ** the context object when it is no longer required. */ return sqlite3_create_function_v2(db, zGeom, -1, SQLITE_ANY, - (void *)pGeomCtx, geomCallback, 0, 0, doSqlite3Free + (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback + ); +} + +/* +** Register a new 2nd-generation geometry function for use with the +** r-tree MATCH operator. +*/ +SQLITE_API int sqlite3_rtree_query_callback( + sqlite3 *db, /* Register SQL function on this connection */ + const char *zQueryFunc, /* Name of new SQL function */ + int (*xQueryFunc)(sqlite3_rtree_query_info*), /* Callback */ + void *pContext, /* Extra data passed into the callback */ + void (*xDestructor)(void*) /* Destructor for the extra data */ +){ + RtreeGeomCallback *pGeomCtx; /* Context object for new user-function */ + + /* Allocate and populate the context object. */ + pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback)); + if( !pGeomCtx ) return SQLITE_NOMEM; + pGeomCtx->xGeom = 0; + pGeomCtx->xQueryFunc = xQueryFunc; + pGeomCtx->xDestructor = xDestructor; + pGeomCtx->pContext = pContext; + return sqlite3_create_function_v2(db, zQueryFunc, -1, SQLITE_ANY, + (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback ); } #if !SQLITE_CORE -SQLITE_API int sqlite3_extension_init( +#ifdef _WIN32 +__declspec(dllexport) +#endif +SQLITE_API int sqlite3_rtree_init( sqlite3 *db, char **pzErrMsg, const sqlite3_api_routines *pApi @@ -127683,7 +150962,7 @@ SQLITE_API int sqlite3_extension_init( ** * Implementations of the SQL scalar upper() and lower() functions ** for case mapping. ** -** * Integration of ICU and SQLite collation seqences. +** * Integration of ICU and SQLite collation sequences. ** ** * An implementation of the LIKE operator that uses ICU to ** provide case-independent matching. @@ -127697,6 +150976,7 @@ SQLITE_API int sqlite3_extension_init( #include #include +/* #include */ #ifndef SQLITE_CORE SQLITE_EXTENSION_INIT1 @@ -128146,7 +151426,10 @@ SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db){ } #if !SQLITE_CORE -SQLITE_API int sqlite3_extension_init( +#ifdef _WIN32 +__declspec(dllexport) +#endif +SQLITE_API int sqlite3_icu_init( sqlite3 *db, char **pzErrMsg, const sqlite3_api_routines *pApi @@ -128176,8 +151459,12 @@ SQLITE_API int sqlite3_extension_init( #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) #ifdef SQLITE_ENABLE_ICU +/* #include */ +/* #include */ #include +/* #include */ +/* #include */ #include typedef struct IcuTokenizer IcuTokenizer; @@ -128266,13 +151553,16 @@ static int icuOpen( *ppCursor = 0; - if( nInput<0 ){ + if( zInput==0 ){ + nInput = 0; + zInput = ""; + }else if( nInput<0 ){ nInput = strlen(zInput); } nChar = nInput+1; pCsr = (IcuCursor *)sqlite3_malloc( sizeof(IcuCursor) + /* IcuCursor */ - nChar * sizeof(UChar) + /* IcuCursor.aChar[] */ + ((nChar+3)&~3) * sizeof(UChar) + /* IcuCursor.aChar[] */ (nChar+1) * sizeof(int) /* IcuCursor.aOffset[] */ ); if( !pCsr ){ @@ -128280,7 +151570,7 @@ static int icuOpen( } memset(pCsr, 0, sizeof(IcuCursor)); pCsr->aChar = (UChar *)&pCsr[1]; - pCsr->aOffset = (int *)&pCsr->aChar[nChar]; + pCsr->aOffset = (int *)&pCsr->aChar[(nChar+3)&~3]; pCsr->aOffset[iOut] = iInput; U8_NEXT(zInput, iInput, nInput, c); @@ -128352,7 +151642,7 @@ static int icuNext( while( iStartaChar, iWhite, pCsr->nChar, c); + U16_NEXT(pCsr->aChar, iWhite, pCsr->nChar, c); if( u_isspace(c) ){ iStart = iWhite; }else{ diff --git a/src/sqlite/sqlite3.h b/src/sqlite/sqlite3.h index ed9edbd20..c31f126db 100644 --- a/src/sqlite/sqlite3.h +++ b/src/sqlite/sqlite3.h @@ -107,9 +107,9 @@ extern "C" { ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.7.7.1" -#define SQLITE_VERSION_NUMBER 3007007 -#define SQLITE_SOURCE_ID "2011-06-28 17:39:05 af0d91adf497f5f36ec3813f04235a6e195a605f" +#define SQLITE_VERSION "3.8.7.4" +#define SQLITE_VERSION_NUMBER 3008007 +#define SQLITE_SOURCE_ID "2014-12-09 01:34:36 f66f7a17b78ba617acde90fc810107f34f1a1f2e" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -177,7 +177,7 @@ SQLITE_API const char *sqlite3_compileoption_get(int N); ** CAPI3REF: Test To See If The Library Is Threadsafe ** ** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled mutexing code omitted due to the +** SQLite was compiled with mutexing code omitted due to the ** [SQLITE_THREADSAFE] compile-time option being set to 0. ** ** SQLite can be compiled with or without mutexes. When @@ -219,7 +219,8 @@ SQLITE_API int sqlite3_threadsafe(void); ** the opaque structure named "sqlite3". It is useful to think of an sqlite3 ** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and ** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** is its destructor. There are many other interfaces (such as +** and [sqlite3_close_v2()] are its destructors. There are many other +** interfaces (such as ** [sqlite3_prepare_v2()], [sqlite3_create_function()], and ** [sqlite3_busy_timeout()] to name but three) that are methods on an ** sqlite3 object. @@ -266,28 +267,46 @@ typedef sqlite_uint64 sqlite3_uint64; /* ** CAPI3REF: Closing A Database Connection ** -** ^The sqlite3_close() routine is the destructor for the [sqlite3] object. -** ^Calls to sqlite3_close() return SQLITE_OK if the [sqlite3] object is -** successfully destroyed and all associated resources are deallocated. -** -** Applications must [sqlite3_finalize | finalize] all [prepared statements] -** and [sqlite3_blob_close | close] all [BLOB handles] associated with -** the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close() is called on a [database connection] that still has -** outstanding [prepared statements] or [BLOB handles], then it returns -** SQLITE_BUSY. -** -** ^If [sqlite3_close()] is invoked while a transaction is open, +** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors +** for the [sqlite3] object. +** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if +** the [sqlite3] object is successfully destroyed and all associated +** resources are deallocated. +** +** ^If the database connection is associated with unfinalized prepared +** statements or unfinished sqlite3_backup objects then sqlite3_close() +** will leave the database connection open and return [SQLITE_BUSY]. +** ^If sqlite3_close_v2() is called with unfinalized prepared statements +** and/or unfinished sqlite3_backups, then the database connection becomes +** an unusable "zombie" which will automatically be deallocated when the +** last prepared statement is finalized or the last sqlite3_backup is +** finished. The sqlite3_close_v2() interface is intended for use with +** host languages that are garbage collected, and where the order in which +** destructors are called is arbitrary. +** +** Applications should [sqlite3_finalize | finalize] all [prepared statements], +** [sqlite3_blob_close | close] all [BLOB handles], and +** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated +** with the [sqlite3] object prior to attempting to close the object. ^If +** sqlite3_close_v2() is called on a [database connection] that still has +** outstanding [prepared statements], [BLOB handles], and/or +** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation +** of resources is deferred until all [prepared statements], [BLOB handles], +** and [sqlite3_backup] objects are also destroyed. +** +** ^If an [sqlite3] object is destroyed while a transaction is open, ** the transaction is automatically rolled back. ** -** The C parameter to [sqlite3_close(C)] must be either a NULL +** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)] +** must be either a NULL ** pointer or an [sqlite3] object pointer obtained ** from [sqlite3_open()], [sqlite3_open16()], or ** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() with a NULL pointer argument is a -** harmless no-op. +** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer +** argument is a harmless no-op. */ -SQLITE_API int sqlite3_close(sqlite3 *); +SQLITE_API int sqlite3_close(sqlite3*); +SQLITE_API int sqlite3_close_v2(sqlite3*); /* ** The type for a callback function. @@ -351,7 +370,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**); **
    **
  • The application must insure that the 1st parameter to sqlite3_exec() ** is a valid and open [database connection]. -**
  • The application must not close [database connection] specified by +**
  • The application must not close the [database connection] specified by ** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running. **
  • The application must not modify the SQL statement text passed into ** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running. @@ -367,16 +386,14 @@ SQLITE_API int sqlite3_exec( /* ** CAPI3REF: Result Codes -** KEYWORDS: SQLITE_OK {error code} {error codes} -** KEYWORDS: {result code} {result codes} +** KEYWORDS: {result code definitions} ** ** Many SQLite functions return an integer result code from the set shown -** here in order to indicates success or failure. +** here in order to indicate success or failure. ** ** New error codes may be added in future versions of SQLite. ** -** See also: [SQLITE_IOERR_READ | extended result codes], -** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes]. +** See also: [extended result code definitions] */ #define SQLITE_OK 0 /* Successful result */ /* beginning-of-error-codes */ @@ -406,32 +423,27 @@ SQLITE_API int sqlite3_exec( #define SQLITE_FORMAT 24 /* Auxiliary database format error */ #define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ #define SQLITE_NOTADB 26 /* File opened that is not a database file */ +#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */ +#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */ #define SQLITE_ROW 100 /* sqlite3_step() has another row ready */ #define SQLITE_DONE 101 /* sqlite3_step() has finished executing */ /* end-of-error-codes */ /* ** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended error code} {extended error codes} -** KEYWORDS: {extended result code} {extended result codes} +** KEYWORDS: {extended result code definitions} ** -** In its default configuration, SQLite API routines return one of 26 integer -** [SQLITE_OK | result codes]. However, experience has shown that many of +** In its default configuration, SQLite API routines return one of 30 integer +** [result codes]. However, experience has shown that many of ** these result codes are too coarse-grained. They do not provide as ** much information about problems as programmers might like. In an effort to ** address this, newer versions of SQLite (version 3.3.8 and later) include ** support for additional result codes that provide more detailed information -** about errors. The extended result codes are enabled or disabled +** about errors. These [extended result codes] are enabled or disabled ** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. -** -** Some of the available extended result codes are listed here. -** One may expect the number of extended result codes will be expand -** over time. Software that uses extended result codes should expect -** to see new result codes in future releases of SQLite. -** -** The SQLITE_OK result code will never be extended. It will always -** be exactly zero. +** [sqlite3_extended_result_codes()] API. Or, the extended code for +** the most recent error can be obtained using +** [sqlite3_extended_errcode()]. */ #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) @@ -455,12 +467,37 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8)) #define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8)) #define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8)) +#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8)) +#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8)) +#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8)) +#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) #define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) #define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) +#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) #define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) +#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8)) +#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) +#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) #define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) #define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) #define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) +#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) +#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) +#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) +#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) +#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) +#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8)) +#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8)) +#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8)) +#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8)) +#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8)) +#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8)) +#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8)) +#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8)) +#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8)) +#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8)) +#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8)) +#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8)) /* ** CAPI3REF: Flags For File Open Operations @@ -476,6 +513,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */ #define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */ #define SQLITE_OPEN_URI 0x00000040 /* Ok for sqlite3_open_v2() */ +#define SQLITE_OPEN_MEMORY 0x00000080 /* Ok for sqlite3_open_v2() */ #define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */ #define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */ #define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */ @@ -495,7 +533,7 @@ SQLITE_API int sqlite3_exec( ** CAPI3REF: Device Characteristics ** ** The xDeviceCharacteristics method of the [sqlite3_io_methods] -** object returns an integer which is a vector of the these +** object returns an integer which is a vector of these ** bit values expressing I/O characteristics of the mass storage ** device that holds the file that the [sqlite3_io_methods] ** refers to. @@ -509,7 +547,15 @@ SQLITE_API int sqlite3_exec( ** first then the size of the file is extended, never the other ** way around. The SQLITE_IOCAP_SEQUENTIAL property means that ** information is written to disk in the same order as calls -** to xWrite(). +** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that +** after reboot following a crash or power loss, the only bytes in a +** file that were written at the application level might have changed +** and that adjacent bytes, even bytes within the same sector are +** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN +** flag indicate that a file cannot be deleted when open. The +** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on +** read-only media and cannot be changed even by processes with +** elevated privileges. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -523,6 +569,8 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOCAP_SAFE_APPEND 0x00000200 #define SQLITE_IOCAP_SEQUENTIAL 0x00000400 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 +#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 +#define SQLITE_IOCAP_IMMUTABLE 0x00002000 /* ** CAPI3REF: File Locking Levels @@ -629,7 +677,7 @@ struct sqlite3_file { ** locking strategy (for example to use dot-file locks), to inquire ** about the status of a lock, or to break stale locks. The SQLite ** core reserves all opcodes less than 100 for its own use. -** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available. +** A [file control opcodes | list of opcodes] less than 100 is available. ** Applications that define a custom xFileControl method should use opcodes ** greater than 100 to avoid conflicts. VFS implementations should ** return [SQLITE_NOTFOUND] for file control opcodes that they do not @@ -694,11 +742,15 @@ struct sqlite3_io_methods { void (*xShmBarrier)(sqlite3_file*); int (*xShmUnmap)(sqlite3_file*, int deleteFlag); /* Methods above are valid for version 2 */ + int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); + int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p); + /* Methods above are valid for version 3 */ /* Additional methods may be added in future releases */ }; /* ** CAPI3REF: Standard File Control Opcodes +** KEYWORDS: {file control opcodes} {file control opcode} ** ** These integer constants are opcodes for the xFileControl method ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] @@ -711,7 +763,8 @@ struct sqlite3_io_methods { ** into an integer that the pArg argument points to. This capability ** is used during testing and only needs to be supported when SQLITE_TEST ** is defined. -** +**
      +**
    • [[SQLITE_FCNTL_SIZE_HINT]] ** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS ** layer a hint of how large the database file will grow to be during the ** current transaction. This hint is not guaranteed to be accurate but it @@ -719,6 +772,7 @@ struct sqlite3_io_methods { ** file space based on this hint in order to help writes to the database ** file run faster. ** +**
    • [[SQLITE_FCNTL_CHUNK_SIZE]] ** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS ** extends and truncates the database file in chunks of a size specified ** by the user. The fourth argument to [sqlite3_file_control()] should @@ -727,30 +781,195 @@ struct sqlite3_io_methods { ** chunks (say 1MB at a time), may reduce file-system fragmentation and ** improve performance on some systems. ** +**
    • [[SQLITE_FCNTL_FILE_POINTER]] ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer ** to the [sqlite3_file] object associated with a particular database ** connection. See the [sqlite3_file_control()] documentation for ** additional information. ** -** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by -** SQLite and sent to all VFSes in place of a call to the xSync method -** when the database connection has [PRAGMA synchronous] set to OFF.)^ -** Some specialized VFSes need this signal in order to operate correctly -** when [PRAGMA synchronous | PRAGMA synchronous=OFF] is set, but most -** VFSes do not need this signal and should silently ignore this opcode. -** Applications should not call [sqlite3_file_control()] with this -** opcode as doing so may disrupt the operation of the specialized VFSes -** that do require it. +**
    • [[SQLITE_FCNTL_SYNC_OMITTED]] +** No longer in use. +** +**
    • [[SQLITE_FCNTL_SYNC]] +** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and +** sent to the VFS immediately before the xSync method is invoked on a +** database file descriptor. Or, if the xSync method is not invoked +** because the user has configured SQLite with +** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place +** of the xSync method. In most cases, the pointer argument passed with +** this file-control is NULL. However, if the database file is being synced +** as part of a multi-database commit, the argument points to a nul-terminated +** string containing the transactions master-journal file name. VFSes that +** do not need this signal should silently ignore this opcode. Applications +** should not call [sqlite3_file_control()] with this opcode as doing so may +** disrupt the operation of the specialized VFSes that do require it. +** +**
    • [[SQLITE_FCNTL_COMMIT_PHASETWO]] +** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite +** and sent to the VFS after a transaction has been committed immediately +** but before the database is unlocked. VFSes that do not need this signal +** should silently ignore this opcode. Applications should not call +** [sqlite3_file_control()] with this opcode as doing so may disrupt the +** operation of the specialized VFSes that do require it. +** +**
    • [[SQLITE_FCNTL_WIN32_AV_RETRY]] +** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic +** retry counts and intervals for certain disk I/O operations for the +** windows [VFS] in order to provide robustness in the presence of +** anti-virus programs. By default, the windows VFS will retry file read, +** file write, and file delete operations up to 10 times, with a delay +** of 25 milliseconds before the first retry and with the delay increasing +** by an additional 25 milliseconds with each subsequent retry. This +** opcode allows these two values (10 retries and 25 milliseconds of delay) +** to be adjusted. The values are changed for all database connections +** within the same process. The argument is a pointer to an array of two +** integers where the first integer i the new retry count and the second +** integer is the delay. If either integer is negative, then the setting +** is not changed but instead the prior value of that setting is written +** into the array entry, allowing the current retry settings to be +** interrogated. The zDbName parameter is ignored. +** +**
    • [[SQLITE_FCNTL_PERSIST_WAL]] +** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the +** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary +** write ahead log and shared memory files used for transaction control +** are automatically deleted when the latest connection to the database +** closes. Setting persistent WAL mode causes those files to persist after +** close. Persisting the files is useful when other processes that do not +** have write permission on the directory containing the database file want +** to read the database file, as the WAL and shared memory files must exist +** in order for the database to be readable. The fourth parameter to +** [sqlite3_file_control()] for this opcode should be a pointer to an integer. +** That integer is 0 to disable persistent WAL mode or 1 to enable persistent +** WAL mode. If the integer is -1, then it is overwritten with the current +** WAL persistence setting. +** +**
    • [[SQLITE_FCNTL_POWERSAFE_OVERWRITE]] +** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the +** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting +** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the +** xDeviceCharacteristics methods. The fourth parameter to +** [sqlite3_file_control()] for this opcode should be a pointer to an integer. +** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage +** mode. If the integer is -1, then it is overwritten with the current +** zero-damage mode setting. +** +**
    • [[SQLITE_FCNTL_OVERWRITE]] +** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening +** a write transaction to indicate that, unless it is rolled back for some +** reason, the entire database file will be overwritten by the current +** transaction. This is used by VACUUM operations. +** +**
    • [[SQLITE_FCNTL_VFSNAME]] +** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of +** all [VFSes] in the VFS stack. The names are of all VFS shims and the +** final bottom-level VFS are written into memory obtained from +** [sqlite3_malloc()] and the result is stored in the char* variable +** that the fourth parameter of [sqlite3_file_control()] points to. +** The caller is responsible for freeing the memory when done. As with +** all file-control actions, there is no guarantee that this will actually +** do anything. Callers should initialize the char* variable to a NULL +** pointer in case this file-control is not implemented. This file-control +** is intended for diagnostic use only. +** +**
    • [[SQLITE_FCNTL_PRAGMA]] +** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] +** file control is sent to the open [sqlite3_file] object corresponding +** to the database file to which the pragma statement refers. ^The argument +** to the [SQLITE_FCNTL_PRAGMA] file control is an array of +** pointers to strings (char**) in which the second element of the array +** is the name of the pragma and the third element is the argument to the +** pragma or NULL if the pragma has no argument. ^The handler for an +** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element +** of the char** argument point to a string obtained from [sqlite3_mprintf()] +** or the equivalent and that string will become the result of the pragma or +** the error message if the pragma fails. ^If the +** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal +** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA] +** file control returns [SQLITE_OK], then the parser assumes that the +** VFS has handled the PRAGMA itself and the parser generates a no-op +** prepared statement. ^If the [SQLITE_FCNTL_PRAGMA] file control returns +** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means +** that the VFS encountered an error while handling the [PRAGMA] and the +** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA] +** file control occurs at the beginning of pragma statement analysis and so +** it is able to override built-in [PRAGMA] statements. +** +**
    • [[SQLITE_FCNTL_BUSYHANDLER]] +** ^The [SQLITE_FCNTL_BUSYHANDLER] +** file-control may be invoked by SQLite on the database file handle +** shortly after it is opened in order to provide a custom VFS with access +** to the connections busy-handler callback. The argument is of type (void **) +** - an array of two (void *) values. The first (void *) actually points +** to a function of type (int (*)(void *)). In order to invoke the connections +** busy-handler, this function should be invoked with the second (void *) in +** the array as the only argument. If it returns non-zero, then the operation +** should be retried. If it returns zero, the custom VFS should abandon the +** current operation. +** +**
    • [[SQLITE_FCNTL_TEMPFILENAME]] +** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control +** to have SQLite generate a +** temporary filename using the same algorithm that is followed to generate +** temporary filenames for TEMP tables and other internal uses. The +** argument should be a char** which will be filled with the filename +** written into memory obtained from [sqlite3_malloc()]. The caller should +** invoke [sqlite3_free()] on the result to avoid a memory leak. +** +**
    • [[SQLITE_FCNTL_MMAP_SIZE]] +** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the +** maximum number of bytes that will be used for memory-mapped I/O. +** The argument is a pointer to a value of type sqlite3_int64 that +** is an advisory maximum number of bytes in the file to memory map. The +** pointer is overwritten with the old value. The limit is not changed if +** the value originally pointed to is negative, and so the current limit +** can be queried by passing in a pointer to a negative number. This +** file-control is used internally to implement [PRAGMA mmap_size]. +** +**
    • [[SQLITE_FCNTL_TRACE]] +** The [SQLITE_FCNTL_TRACE] file control provides advisory information +** to the VFS about what the higher layers of the SQLite stack are doing. +** This file control is used by some VFS activity tracing [shims]. +** The argument is a zero-terminated string. Higher layers in the +** SQLite stack may generate instances of this file control if +** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled. +** +**
    • [[SQLITE_FCNTL_HAS_MOVED]] +** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a +** pointer to an integer and it writes a boolean into that integer depending +** on whether or not the file has been renamed, moved, or deleted since it +** was first opened. +** +**
    • [[SQLITE_FCNTL_WIN32_SET_HANDLE]] +** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This +** opcode causes the xFileControl method to swap the file handle with the one +** pointed to by the pArg argument. This capability is used during testing +** and only needs to be supported when SQLITE_TEST is defined. +** +**
    */ -#define SQLITE_FCNTL_LOCKSTATE 1 -#define SQLITE_GET_LOCKPROXYFILE 2 -#define SQLITE_SET_LOCKPROXYFILE 3 -#define SQLITE_LAST_ERRNO 4 -#define SQLITE_FCNTL_SIZE_HINT 5 -#define SQLITE_FCNTL_CHUNK_SIZE 6 -#define SQLITE_FCNTL_FILE_POINTER 7 -#define SQLITE_FCNTL_SYNC_OMITTED 8 - +#define SQLITE_FCNTL_LOCKSTATE 1 +#define SQLITE_GET_LOCKPROXYFILE 2 +#define SQLITE_SET_LOCKPROXYFILE 3 +#define SQLITE_LAST_ERRNO 4 +#define SQLITE_FCNTL_SIZE_HINT 5 +#define SQLITE_FCNTL_CHUNK_SIZE 6 +#define SQLITE_FCNTL_FILE_POINTER 7 +#define SQLITE_FCNTL_SYNC_OMITTED 8 +#define SQLITE_FCNTL_WIN32_AV_RETRY 9 +#define SQLITE_FCNTL_PERSIST_WAL 10 +#define SQLITE_FCNTL_OVERWRITE 11 +#define SQLITE_FCNTL_VFSNAME 12 +#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13 +#define SQLITE_FCNTL_PRAGMA 14 +#define SQLITE_FCNTL_BUSYHANDLER 15 +#define SQLITE_FCNTL_TEMPFILENAME 16 +#define SQLITE_FCNTL_MMAP_SIZE 18 +#define SQLITE_FCNTL_TRACE 19 +#define SQLITE_FCNTL_HAS_MOVED 20 +#define SQLITE_FCNTL_SYNC 21 +#define SQLITE_FCNTL_COMMIT_PHASETWO 22 +#define SQLITE_FCNTL_WIN32_SET_HANDLE 23 /* ** CAPI3REF: Mutex Handle @@ -805,7 +1024,7 @@ typedef struct sqlite3_mutex sqlite3_mutex; ** from xFullPathname() with an optional suffix added. ** ^If a suffix is added to the zFilename parameter, it will ** consist of a single "-" character followed by no more than -** 10 alphanumeric and/or "-" characters. +** 11 alphanumeric and/or "-" characters. ** ^SQLite further guarantees that ** the string will be valid and unchanged until xClose() is ** called. Because of the previous sentence, @@ -1178,16 +1397,10 @@ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); ** order to verify that SQLite recovers gracefully from such ** conditions. ** -** The xMalloc and xFree methods must work like the -** malloc() and free() functions from the standard C library. -** The xRealloc method must work like realloc() from the standard C library -** with the exception that if the second argument to xRealloc is zero, -** xRealloc must be a no-op - it must not perform any allocation or -** deallocation. ^SQLite guarantees that the second argument to +** The xMalloc, xRealloc, and xFree methods must work like the +** malloc(), realloc() and free() functions from the standard C library. +** ^SQLite guarantees that the second argument to ** xRealloc is always a value returned by a prior call to xRoundup. -** And so in cases where xRoundup always returns a positive number, -** xRealloc can perform exactly as the standard library realloc() and -** still be in compliance with this specification. ** ** xSize should return the allocated size of a memory allocation ** previously obtained from xMalloc or xRealloc. The allocated size @@ -1201,7 +1414,7 @@ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); ** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, ** that causes the corresponding memory allocation to fail. ** -** The xInit method initializes the memory allocator. (For example, +** The xInit method initializes the memory allocator. For example, ** it might allocate any require mutexes or initialize internal data ** structures. The xShutdown method is invoked (indirectly) by ** [sqlite3_shutdown()] and should deallocate any resources acquired @@ -1342,7 +1555,7 @@ struct sqlite3_mem_methods { **
    ^This option specifies a static memory buffer that SQLite can use for ** the database page cache with the default page cache implementation. ** This configuration should not be used if an application-define page -** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option. +** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option. ** There are three arguments to this option: A pointer to 8-byte aligned ** memory, the size of each page buffer (sz), and the number of pages (N). ** The sz argument should be the size of the largest database page @@ -1373,8 +1586,8 @@ struct sqlite3_mem_methods { ** allocator is engaged to handle all of SQLites memory allocation needs. ** The first pointer (the memory pointer) must be aligned to an 8-byte ** boundary or subsequent behavior of SQLite will be undefined. -** The minimum allocation size is capped at 2^12. Reasonable values -** for the minimum allocation size are 2^5 through 2^8.
    +** The minimum allocation size is capped at 2**12. Reasonable values +** for the minimum allocation size are 2**5 through 2**8. ** ** [[SQLITE_CONFIG_MUTEX]]
    SQLITE_CONFIG_MUTEX
    **
    ^(This option takes a single argument which is a pointer to an @@ -1411,19 +1624,21 @@ struct sqlite3_mem_methods { ** verb to [sqlite3_db_config()] can be used to change the lookaside ** configuration on individual connections.)^
    ** -** [[SQLITE_CONFIG_PCACHE]]
    SQLITE_CONFIG_PCACHE
    +** [[SQLITE_CONFIG_PCACHE2]]
    SQLITE_CONFIG_PCACHE2
    **
    ^(This option takes a single argument which is a pointer to -** an [sqlite3_pcache_methods] object. This object specifies the interface +** an [sqlite3_pcache_methods2] object. This object specifies the interface ** to a custom page cache implementation.)^ ^SQLite makes a copy of the ** object and uses it for page cache memory allocations.
    ** -** [[SQLITE_CONFIG_GETPCACHE]]
    SQLITE_CONFIG_GETPCACHE
    +** [[SQLITE_CONFIG_GETPCACHE2]]
    SQLITE_CONFIG_GETPCACHE2
    **
    ^(This option takes a single argument which is a pointer to an -** [sqlite3_pcache_methods] object. SQLite copies of the current +** [sqlite3_pcache_methods2] object. SQLite copies of the current ** page cache implementation into that object.)^
    ** ** [[SQLITE_CONFIG_LOG]]
    SQLITE_CONFIG_LOG
    -**
    ^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a +**
    The SQLITE_CONFIG_LOG option is used to configure the SQLite +** global [error log]. +** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a ** function with a call signature of void(*)(void*,int,const char*), ** and a pointer to void. ^If the function pointer is not NULL, it is ** invoked by [sqlite3_log()] to process each logging event. ^If the @@ -1441,17 +1656,73 @@ struct sqlite3_mem_methods { ** function must be threadsafe.
    ** ** [[SQLITE_CONFIG_URI]]
    SQLITE_CONFIG_URI -**
    This option takes a single argument of type int. If non-zero, then +**
    ^(This option takes a single argument of type int. If non-zero, then ** URI handling is globally enabled. If the parameter is zero, then URI handling -** is globally disabled. If URI handling is globally enabled, all filenames +** is globally disabled.)^ ^If URI handling is globally enabled, all filenames ** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or ** specified as part of [ATTACH] commands are interpreted as URIs, regardless ** of whether or not the [SQLITE_OPEN_URI] flag is set when the database -** connection is opened. If it is globally disabled, filenames are +** connection is opened. ^If it is globally disabled, filenames are ** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the -** database connection is opened. By default, URI handling is globally +** database connection is opened. ^(By default, URI handling is globally ** disabled. The default value may be changed by compiling with the -** [SQLITE_USE_URI] symbol defined. +** [SQLITE_USE_URI] symbol defined.)^ +** +** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]]
    SQLITE_CONFIG_COVERING_INDEX_SCAN +**
    ^This option takes a single integer argument which is interpreted as +** a boolean in order to enable or disable the use of covering indices for +** full table scans in the query optimizer. ^The default setting is determined +** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" +** if that compile-time option is omitted. +** The ability to disable the use of covering indices for full table scans +** is because some incorrectly coded legacy applications might malfunction +** when the optimization is enabled. Providing the ability to +** disable the optimization allows the older, buggy application code to work +** without change even with newer versions of SQLite. +** +** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]] +**
    SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE +**
    These options are obsolete and should not be used by new code. +** They are retained for backwards compatibility but are now no-ops. +**
    +** +** [[SQLITE_CONFIG_SQLLOG]] +**
    SQLITE_CONFIG_SQLLOG +**
    This option is only available if sqlite is compiled with the +** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should +** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int). +** The second should be of type (void*). The callback is invoked by the library +** in three separate circumstances, identified by the value passed as the +** fourth parameter. If the fourth parameter is 0, then the database connection +** passed as the second argument has just been opened. The third argument +** points to a buffer containing the name of the main database file. If the +** fourth parameter is 1, then the SQL statement that the third parameter +** points to has just been executed. Or, if the fourth parameter is 2, then +** the connection being passed as the second parameter is being closed. The +** third parameter is passed NULL In this case. An example of using this +** configuration option can be seen in the "test_sqllog.c" source file in +** the canonical SQLite source tree.
    +** +** [[SQLITE_CONFIG_MMAP_SIZE]] +**
    SQLITE_CONFIG_MMAP_SIZE +**
    ^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values +** that are the default mmap size limit (the default setting for +** [PRAGMA mmap_size]) and the maximum allowed mmap size limit. +** ^The default setting can be overridden by each database connection using +** either the [PRAGMA mmap_size] command, or by using the +** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size +** cannot be changed at run-time. Nor may the maximum allowed mmap size +** exceed the compile-time maximum mmap size set by the +** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ +** ^If either argument to this option is negative, then that argument is +** changed to its compile-time default. +** +** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] +**
    SQLITE_CONFIG_WIN32_HEAPSIZE +**
    ^This option is only available if SQLite is compiled for Windows +** with the [SQLITE_WIN32_MALLOC] pre-processor macro defined. +** SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value +** that specifies the maximum size of the created heap. ** */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -1467,10 +1738,16 @@ struct sqlite3_mem_methods { #define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */ /* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ #define SQLITE_CONFIG_LOOKASIDE 13 /* int int */ -#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */ -#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */ +#define SQLITE_CONFIG_PCACHE 14 /* no-op */ +#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */ #define SQLITE_CONFIG_LOG 16 /* xFunc, void* */ #define SQLITE_CONFIG_URI 17 /* int */ +#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */ +#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */ +#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */ +#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */ +#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */ +#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -1547,19 +1824,21 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); /* ** CAPI3REF: Last Insert Rowid ** -** ^Each entry in an SQLite table has a unique 64-bit signed +** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables) +** has a unique 64-bit signed ** integer key called the [ROWID | "rowid"]. ^The rowid is always available ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those ** names are not also used by explicitly declared columns. ^If ** the table has a column of type [INTEGER PRIMARY KEY] then that column ** is another alias for the rowid. ** -** ^This routine returns the [rowid] of the most recent -** successful [INSERT] into the database from the [database connection] -** in the first argument. ^As of SQLite version 3.7.7, this routines -** records the last insert rowid of both ordinary tables and [virtual tables]. -** ^If no successful [INSERT]s -** have ever occurred on that database connection, zero is returned. +** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the +** most recent successful [INSERT] into a rowid table or [virtual table] +** on database connection D. +** ^Inserts into [WITHOUT ROWID] tables are not recorded. +** ^If no successful [INSERT]s into rowid tables +** have ever occurred on the database connection D, +** then sqlite3_last_insert_rowid(D) returns zero. ** ** ^(If an [INSERT] occurs within a trigger or within a [virtual table] ** method, then this routine will return the [rowid] of the inserted @@ -1751,27 +2030,33 @@ SQLITE_API int sqlite3_complete16(const void *sql); /* ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors ** -** ^This routine sets a callback function that might be invoked whenever -** an attempt is made to open a database table that another thread -** or process has locked. +** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X +** that might be invoked with argument P whenever +** an attempt is made to access a database table associated with +** [database connection] D when another thread +** or process has the table locked. +** The sqlite3_busy_handler() interface is used to implement +** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout]. ** -** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] +** ^If the busy callback is NULL, then [SQLITE_BUSY] ** is returned immediately upon encountering the lock. ^If the busy callback ** is not NULL, then the callback might be invoked with two arguments. ** ** ^The first argument to the busy handler is a copy of the void* pointer which ** is the third argument to sqlite3_busy_handler(). ^The second argument to ** the busy handler callback is the number of times that the busy handler has -** been invoked for this locking event. ^If the +** been invoked for the same locking event. ^If the ** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned. +** access the database and [SQLITE_BUSY] is returned +** to the application. ** ^If the callback returns non-zero, then another attempt -** is made to open the database for reading and the cycle repeats. +** is made to access the database and the cycle repeats. ** ** The presence of a busy handler does not guarantee that it will be invoked ** when there is lock contention. ^If SQLite determines that invoking the busy ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler. +** to the application instead of invoking the +** busy handler. ** Consider a scenario where one process is holding a read lock that ** it is trying to promote to a reserved lock and ** a second process is holding a reserved lock that it is trying @@ -1785,28 +2070,15 @@ SQLITE_API int sqlite3_complete16(const void *sql); ** ** ^The default busy callback is NULL. ** -** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED] -** when SQLite is in the middle of a large transaction where all the -** changes will not fit into the in-memory cache. SQLite will -** already hold a RESERVED lock on the database file, but it needs -** to promote this lock to EXCLUSIVE so that it can spill cache -** pages into the database file without harm to concurrent -** readers. ^If it is unable to promote the lock, then the in-memory -** cache will be left in an inconsistent state and so the error -** code is promoted from the relatively benign [SQLITE_BUSY] to -** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion -** forces an automatic rollback of the changes. See the -** -** CorruptionFollowingBusyError wiki page for a discussion of why -** this is important. -** ** ^(There can only be a single busy handler defined for each ** [database connection]. Setting a new busy handler clears any ** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** will also set or clear the busy handler. +** or evaluating [PRAGMA busy_timeout=N] will change the +** busy handler and thus clear any previously set busy handler. ** ** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. Any such actions +** database connection that invoked the busy handler. In other words, +** the busy handler is not reentrant. Any such actions ** result in undefined behavior. ** ** A busy handler must not close the database connection @@ -1822,15 +2094,17 @@ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*); ** will sleep multiple times until at least "ms" milliseconds of sleeping ** have accumulated. ^After at least "ms" milliseconds of sleeping, ** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]. +** [SQLITE_BUSY]. ** ** ^Calling this routine with an argument less than or equal to zero ** turns off all busy handlers. ** ** ^(There can only be a single busy handler for a particular -** [database connection] any any given moment. If another busy handler +** [database connection] at any given moment. If another busy handler ** was defined (using [sqlite3_busy_handler()]) prior to calling ** this routine, that other busy handler is cleared.)^ +** +** See also: [PRAGMA busy_timeout] */ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); @@ -1955,7 +2229,7 @@ SQLITE_API void sqlite3_free_table(char **result); ** All of the usual printf() formatting options apply. In addition, there ** is are "%q", "%Q", and "%z" options. ** -** ^(The %q option works like %s in that it substitutes a null-terminated +** ^(The %q option works like %s in that it substitutes a nul-terminated ** string from the argument list. But %q also doubles every '\'' character. ** %q is designed for use inside a string literal.)^ By doubling each '\'' ** character it escapes that character and allows it to be inserted into @@ -2030,6 +2304,10 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns ** a NULL pointer. ** +** ^The sqlite3_malloc64(N) routine works just like +** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead +** of a signed 32-bit integer. +** ** ^Calling sqlite3_free() with a pointer previously returned ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so ** that it might be reused. ^The sqlite3_free() routine is @@ -2041,24 +2319,38 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** might result if sqlite3_free() is called with a non-NULL pointer that ** was not obtained from sqlite3_malloc() or sqlite3_realloc(). ** -** ^(The sqlite3_realloc() interface attempts to resize a -** prior memory allocation to be at least N bytes, where N is the -** second parameter. The memory allocation to be resized is the first -** parameter.)^ ^ If the first parameter to sqlite3_realloc() +** ^The sqlite3_realloc(X,N) interface attempts to resize a +** prior memory allocation X to be at least N bytes. +** ^If the X parameter to sqlite3_realloc(X,N) ** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc(). -** ^If the second parameter to sqlite3_realloc() is zero or +** sqlite3_malloc(N). +** ^If the N parameter to sqlite3_realloc(X,N) is zero or ** negative then the behavior is exactly the same as calling -** sqlite3_free(P) where P is the first parameter to sqlite3_realloc(). -** ^sqlite3_realloc() returns a pointer to a memory allocation -** of at least N bytes in size or NULL if sufficient memory is unavailable. +** sqlite3_free(X). +** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation +** of at least N bytes in size or NULL if insufficient memory is available. ** ^If M is the size of the prior allocation, then min(N,M) bytes ** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc() and the prior allocation is freed. -** ^If sqlite3_realloc() returns NULL, then the prior allocation -** is not freed. -** -** ^The memory returned by sqlite3_malloc() and sqlite3_realloc() +** by sqlite3_realloc(X,N) and the prior allocation is freed. +** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the +** prior allocation is not freed. +** +** ^The sqlite3_realloc64(X,N) interfaces works the same as +** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead +** of a 32-bit signed integer. +** +** ^If X is a memory allocation previously obtained from sqlite3_malloc(), +** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then +** sqlite3_msize(X) returns the size of that memory allocation in bytes. +** ^The value returned by sqlite3_msize(X) might be larger than the number +** of bytes requested when X was allocated. ^If X is a NULL pointer then +** sqlite3_msize(X) returns zero. If X points to something that is not +** the beginning of memory allocation, or if it points to a formerly +** valid memory allocation that has now been freed, then the behavior +** of sqlite3_msize(X) is undefined and possibly harmful. +** +** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(), +** sqlite3_malloc64(), and sqlite3_realloc64() ** is always aligned to at least an 8 byte boundary, or to a ** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time ** option is used. @@ -2068,12 +2360,12 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** implementation of these routines to be omitted. That capability ** is no longer provided. Only built-in memory allocators can be used. ** -** The Windows OS interface layer calls +** Prior to SQLite version 3.7.10, the Windows OS interface layer called ** the system malloc() and free() directly when converting ** filenames between the UTF-8 encoding used by SQLite ** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors are detected, but -** they are reported back as [SQLITE_CANTOPEN] or +** installation. Memory allocation errors were detected, but +** they were reported back as [SQLITE_CANTOPEN] or ** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. ** ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] @@ -2086,8 +2378,11 @@ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); ** [sqlite3_free()] or [sqlite3_realloc()]. */ SQLITE_API void *sqlite3_malloc(int); +SQLITE_API void *sqlite3_malloc64(sqlite3_uint64); SQLITE_API void *sqlite3_realloc(void*, int); +SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64); SQLITE_API void sqlite3_free(void*); +SQLITE_API sqlite3_uint64 sqlite3_msize(void*); /* ** CAPI3REF: Memory Allocator Statistics @@ -2125,11 +2420,13 @@ SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); ** applications to access the same PRNG for other purposes. ** ** ^A call to this routine stores N bytes of randomness into buffer P. +** ^If N is less than one, then P can be a NULL pointer. ** -** ^The first time this routine is invoked (either internally or by -** the application) the PRNG is seeded using randomness obtained -** from the xRandomness method of the default [sqlite3_vfs] object. -** ^On all subsequent invocations, the pseudo-randomness is generated +** ^If this routine has not been previously called or if the previous +** call had N less than one, then the PRNG is seeded using randomness +** obtained from the xRandomness method of the default [sqlite3_vfs] object. +** ^If the previous call to this routine had an N of 1 or more then +** the pseudo-randomness is generated ** internally and without recourse to the [sqlite3_vfs] xRandomness ** method. */ @@ -2230,8 +2527,8 @@ SQLITE_API int sqlite3_set_authorizer( ** [sqlite3_set_authorizer | authorizer documentation] for additional ** information. ** -** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code] -** from the [sqlite3_vtab_on_conflict()] interface. +** Note that SQLITE_IGNORE is also used as a [conflict resolution mode] +** returned from the [sqlite3_vtab_on_conflict()] interface. */ #define SQLITE_DENY 1 /* Abort the SQL statement with an error */ #define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ @@ -2289,6 +2586,7 @@ SQLITE_API int sqlite3_set_authorizer( #define SQLITE_FUNCTION 31 /* NULL Function Name */ #define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ #define SQLITE_COPY 0 /* No longer used */ +#define SQLITE_RECURSIVE 33 /* NULL NULL */ /* ** CAPI3REF: Tracing And Profiling Functions @@ -2304,6 +2602,9 @@ SQLITE_API int sqlite3_set_authorizer( ** as each triggered subprogram is entered. The callbacks for triggers ** contain a UTF-8 SQL comment that identifies the trigger.)^ ** +** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit +** the length of [bound parameter] expansion in the output of sqlite3_trace(). +** ** ^The callback function registered by sqlite3_profile() is invoked ** as each SQL statement finishes. ^The profile callback contains ** the original statement text and an estimate of wall-clock time @@ -2329,9 +2630,10 @@ SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*, ** interface is to keep a GUI updated during a large query. ** ** ^The parameter P is passed through as the only parameter to the -** callback function X. ^The parameter N is the number of +** callback function X. ^The parameter N is the approximate number of ** [virtual machine instructions] that are evaluated between successive -** invocations of the callback X. +** invocations of the callback X. ^If N is less than one then the progress +** handler is disabled. ** ** ^Only a single progress handler may be defined at one time per ** [database connection]; setting a new progress handler cancels the @@ -2367,9 +2669,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** an English language description of the error following a failure of any ** of the sqlite3_open() routines. ** -** ^The default encoding for the database will be UTF-8 if -** sqlite3_open() or sqlite3_open_v2() is called and -** UTF-16 in the native byte order if sqlite3_open16() is used. +** ^The default encoding will be UTF-8 for databases created using +** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases +** created using sqlite3_open16() will be UTF-16 in the native byte order. ** ** Whether or not an error occurs when it is opened, resources ** associated with the [database connection] handle should be released by @@ -2457,13 +2759,14 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** then it is interpreted as an absolute path. ^If the path does not begin ** with a '/' (meaning that the authority section is omitted from the URI) ** then the path is interpreted as a relative path. -** ^On windows, the first component of an absolute path -** is a drive specification (e.g. "C:"). +** ^(On windows, the first component of an absolute path +** is a drive specification (e.g. "C:").)^ ** ** [[core URI query parameters]] ** The query component of a URI may contain parameters that are interpreted ** either by SQLite itself, or by a [VFS | custom VFS implementation]. -** SQLite interprets the following three query parameters: +** SQLite and its built-in [VFSes] interpret the +** following query parameters: ** **
      **
    • vfs: ^The "vfs" parameter may be used to specify the name of @@ -2474,18 +2777,20 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** present, then the VFS specified by the option takes precedence over ** the value passed as the fourth parameter to sqlite3_open_v2(). ** -**
    • mode: ^(The mode parameter may be set to either "ro", "rw" or -** "rwc". Attempting to set it to any other value is an error)^. +**
    • mode: ^(The mode parameter may be set to either "ro", "rw", +** "rwc", or "memory". Attempting to set it to any other value is +** an error)^. ** ^If "ro" is specified, then the database is opened for read-only ** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the -** third argument to sqlite3_prepare_v2(). ^If the mode option is set to +** third argument to sqlite3_open_v2(). ^If the mode option is set to ** "rw", then the database is opened for read-write (but not create) ** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had ** been set. ^Value "rwc" is equivalent to setting both -** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If sqlite3_open_v2() is -** used, it is an error to specify a value for the mode parameter that is -** less restrictive than that specified by the flags passed as the third -** parameter. +** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is +** set to "memory" then a pure [in-memory database] that never reads +** or writes from disk is used. ^It is an error to specify a value for +** the mode parameter that is less restrictive than that specified by +** the flags passed in the third parameter to sqlite3_open_v2(). ** **
    • cache: ^The cache parameter may be set to either "shared" or ** "private". ^Setting it to "shared" is equivalent to setting the @@ -2493,8 +2798,30 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** sqlite3_open_v2(). ^Setting the cache parameter to "private" is ** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit. ** ^If sqlite3_open_v2() is used and the "cache" parameter is present in -** a URI filename, its value overrides any behaviour requested by setting +** a URI filename, its value overrides any behavior requested by setting ** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag. +** +**
    • psow: ^The psow parameter indicates whether or not the +** [powersafe overwrite] property does or does not apply to the +** storage media on which the database file resides. +** +**
    • nolock: ^The nolock parameter is a boolean query parameter +** which if set disables file locking in rollback journal modes. This +** is useful for accessing a database on a filesystem that does not +** support locking. Caution: Database corruption might result if two +** or more processes write to the same database and any one of those +** processes uses nolock=1. +** +**
    • immutable: ^The immutable parameter is a boolean query +** parameter that indicates that the database file is stored on +** read-only media. ^When immutable is set, SQLite assumes that the +** database file cannot be changed, even by a process with higher +** privilege, and so the database is opened read-only and all locking +** and change detection is disabled. Caution: Setting the immutable +** property on a database file that does in fact change can result +** in incorrect query results and/or [SQLITE_CORRUPT] errors. +** See also: [SQLITE_IOCAP_IMMUTABLE]. +** **
    ** ** ^Specifying an unknown parameter in the query component of a URI is not an @@ -2524,8 +2851,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** Open file "data.db" in the current directory for read-only access. ** Regardless of whether or not shared-cache mode is enabled by ** default, use a private cache. -**
file:/home/fred/data.db?vfs=unix-nolock -** Open file "/home/fred/data.db". Use the special VFS "unix-nolock". +**
file:/home/fred/data.db?vfs=unix-dotfile +** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" +** that uses dot-files in place of posix advisory locking. **
file:data.db?mode=readonly ** An error. "readonly" is not a valid option for the "mode" parameter. **
@@ -2544,6 +2872,12 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** codepage is currently defined. Filenames containing international ** characters must be converted to UTF-8 prior to passing them into ** sqlite3_open() or sqlite3_open_v2(). +** +** Note to Windows Runtime users: The temporary directory must be set +** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various +** features that require the use of temporary files may fail. +** +** See also: [sqlite3_temp_directory] */ SQLITE_API int sqlite3_open( const char *filename, /* Database filename (UTF-8) */ @@ -2563,21 +2897,45 @@ SQLITE_API int sqlite3_open_v2( /* ** CAPI3REF: Obtain Values For URI Parameters ** -** This is a utility routine, useful to VFS implementations, that checks +** These are utility routines, useful to VFS implementations, that check ** to see if a database file was a URI that contained a specific query -** parameter, and if so obtains the value of the query parameter. -** -** The zFilename argument is the filename pointer passed into the xOpen() -** method of a VFS implementation. The zParam argument is the name of the -** query parameter we seek. This routine returns the value of the zParam -** parameter if it exists. If the parameter does not exist, this routine -** returns a NULL pointer. -** -** If the zFilename argument to this function is not a pointer that SQLite -** passed into the xOpen VFS method, then the behavior of this routine -** is undefined and probably undesirable. +** parameter, and if so obtains the value of that query parameter. +** +** If F is the database filename pointer passed into the xOpen() method of +** a VFS implementation when the flags parameter to xOpen() has one or +** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and +** P is the name of the query parameter, then +** sqlite3_uri_parameter(F,P) returns the value of the P +** parameter if it exists or a NULL pointer if P does not appear as a +** query parameter on F. If P is a query parameter of F +** has no explicit value, then sqlite3_uri_parameter(F,P) returns +** a pointer to an empty string. +** +** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean +** parameter and returns true (1) or false (0) according to the value +** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the +** value of query parameter P is one of "yes", "true", or "on" in any +** case or if the value begins with a non-zero number. The +** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of +** query parameter P is one of "no", "false", or "off" in any case or +** if the value begins with a numeric zero. If P is not a query +** parameter on F or if the value of P is does not match any of the +** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0). +** +** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a +** 64-bit signed integer and returns that integer, or D if P does not +** exist. If the value of P is something other than an integer, then +** zero is returned. +** +** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and +** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and +** is not a database file pathname pointer that SQLite passed into the xOpen +** VFS method, then the behavior of this routine is undefined and probably +** undesirable. */ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam); +SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault); +SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64); /* @@ -2599,6 +2957,11 @@ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char * ** However, the error string might be overwritten or deallocated by ** subsequent calls to other SQLite interface functions.)^ ** +** ^The sqlite3_errstr() interface returns the English-language text +** that describes the [result code], as UTF-8. +** ^(Memory to hold the error message string is managed internally +** and must not be freed by the application)^. +** ** When the serialized [threading mode] is in use, it might be the ** case that a second error occurs on a separate thread in between ** the time of the first error and the call to these interfaces. @@ -2617,6 +2980,7 @@ SQLITE_API int sqlite3_errcode(sqlite3 *db); SQLITE_API int sqlite3_extended_errcode(sqlite3 *db); SQLITE_API const char *sqlite3_errmsg(sqlite3*); SQLITE_API const void *sqlite3_errmsg16(sqlite3*); +SQLITE_API const char *sqlite3_errstr(int); /* ** CAPI3REF: SQL Statement Object @@ -2735,6 +3099,10 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(
SQLITE_LIMIT_TRIGGER_DEPTH
**
The maximum depth of recursion for triggers.
)^ +** +** [[SQLITE_LIMIT_WORKER_THREADS]] ^(
SQLITE_LIMIT_WORKER_THREADS
+**
The maximum number of auxiliary worker threads that a single +** [prepared statement] may start.
)^ ** */ #define SQLITE_LIMIT_LENGTH 0 @@ -2748,6 +3116,7 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); #define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 #define SQLITE_LIMIT_VARIABLE_NUMBER 9 #define SQLITE_LIMIT_TRIGGER_DEPTH 10 +#define SQLITE_LIMIT_WORKER_THREADS 11 /* ** CAPI3REF: Compiling An SQL Statement @@ -2773,7 +3142,8 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** that the supplied string is nul-terminated, then there is a small ** performance advantage to be gained by passing an nByte parameter that ** is equal to the number of bytes in the input string including -** the nul-terminator bytes. +** the nul-terminator bytes as this saves SQLite from having to +** make a copy of the input string. ** ** ^If pzTail is not NULL then *pzTail is made to point to the first byte ** past the end of the first SQL statement in zSql. These routines only @@ -2803,7 +3173,8 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); **
  • ** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it ** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. +** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY] +** retries will occur before sqlite3_step() gives up and returns an error. **
    • ** **
  • @@ -2824,8 +3195,7 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ^The specific value of WHERE-clause [parameter] might influence the ** choice of query plan if the parameter is the left-hand side of a [LIKE] ** or [GLOB] operator or if the parameter is compared to an indexed column -** and the [SQLITE_ENABLE_STAT2] compile-time option is enabled. -** the +** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. **
    • ** */ @@ -2898,6 +3268,25 @@ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); */ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt); +/* +** CAPI3REF: Determine If A Prepared Statement Has Been Reset +** +** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the +** [prepared statement] S has been stepped at least once using +** [sqlite3_step(S)] but has not run to completion and/or has not +** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S) +** interface returns false if S is a NULL pointer. If S is not a +** NULL pointer and is not a pointer to a valid [prepared statement] +** object, then the behavior is undefined and probably undesirable. +** +** This interface can be used in combination [sqlite3_next_stmt()] +** to locate all prepared statements associated with a database +** connection that are in need of being reset. This can be used, +** for example, in diagnostic routines to search for prepared +** statements that are holding a transaction open. +*/ +SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*); + /* ** CAPI3REF: Dynamically Typed Value Object ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} @@ -2988,18 +3377,31 @@ typedef struct sqlite3_context sqlite3_context; ** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). ** ** ^The third argument is the value to bind to the parameter. +** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16() +** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter +** is ignored and the end result is the same as sqlite3_bind_null(). ** ** ^(In those routines that have a fourth argument, its value is the ** number of bytes in the parameter. To be clear: the value is the ** number of bytes in the value, not the number of characters.)^ -** ^If the fourth parameter is negative, the length of the string is +** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16() +** is negative, then the length of the string is ** the number of bytes up to the first zero terminator. -** -** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and -** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or +** If the fourth parameter to sqlite3_bind_blob() is negative, then +** the behavior is undefined. +** If a non-negative fourth parameter is provided to sqlite3_bind_text() +** or sqlite3_bind_text16() or sqlite3_bind_text64() then +** that parameter must be the byte offset +** where the NUL terminator would occur assuming the string were NUL +** terminated. If any NUL characters occur at byte offsets less than +** the value of the fourth parameter then the resulting string value will +** contain embedded NULs. The result of expressions involving strings +** with embedded NULs is undefined. +** +** ^The fifth argument to the BLOB and string binding interfaces +** is a destructor used to dispose of the BLOB or ** string after SQLite has finished with it. ^The destructor is called -** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(), -** sqlite3_bind_text(), or sqlite3_bind_text16() fails. +** to dispose of the BLOB or string even if the call to bind API fails. ** ^If the fifth argument is ** the special value [SQLITE_STATIC], then SQLite assumes that the ** information is in static, unmanaged space and does not need to be freed. @@ -3007,6 +3409,14 @@ typedef struct sqlite3_context sqlite3_context; ** SQLite makes its own private copy of the data immediately, before ** the sqlite3_bind_*() routine returns. ** +** ^The sixth argument to sqlite3_bind_text64() must be one of +** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE] +** to specify the encoding of the text in the third parameter. If +** the sixth argument to sqlite3_bind_text64() is not one of the +** allowed values shown above, or if the text encoding is different +** from the encoding specified by the sixth parameter, then the behavior +** is undefined. +** ** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that ** is filled with zeroes. ^A zeroblob uses a fixed amount of memory ** (just an integer to hold its size) while it is being processed. @@ -3027,6 +3437,9 @@ typedef struct sqlite3_context sqlite3_context; ** ** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an ** [error code] if anything goes wrong. +** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB +** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or +** [SQLITE_MAX_LENGTH]. ** ^[SQLITE_RANGE] is returned if the parameter ** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. ** @@ -3034,12 +3447,16 @@ typedef struct sqlite3_context sqlite3_context; ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. */ SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64, + void(*)(void*)); SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*)); SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); +SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); @@ -3327,6 +3744,12 @@ SQLITE_API int sqlite3_step(sqlite3_stmt*); ** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of ** interfaces) then sqlite3_data_count(P) returns 0. ** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer. +** ^The sqlite3_data_count(P) routine returns 0 if the previous call to +** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P) +** will return non-zero if previous call to [sqlite3_step](P) returned +** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum] +** where it always returns zero since each step of that multi-step +** pragma returns 0 columns of data. ** ** See also: [sqlite3_column_count()] */ @@ -3426,7 +3849,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** bytes in the string, not the number of characters. ** ** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero terminated. ^The return +** even empty strings, are always zero-terminated. ^The return ** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer. ** ** ^The object returned by [sqlite3_column_value()] is an @@ -3449,19 +3872,19 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** **
    NULL INTEGER Result is 0 **
    NULL FLOAT Result is 0.0 -**
    NULL TEXT Result is NULL pointer -**
    NULL BLOB Result is NULL pointer +**
    NULL TEXT Result is a NULL pointer +**
    NULL BLOB Result is a NULL pointer **
    INTEGER FLOAT Convert from integer to float **
    INTEGER TEXT ASCII rendering of the integer **
    INTEGER BLOB Same as INTEGER->TEXT -**
    FLOAT INTEGER Convert from float to integer +**
    FLOAT INTEGER [CAST] to INTEGER **
    FLOAT TEXT ASCII rendering of the float -**
    FLOAT BLOB Same as FLOAT->TEXT -**
    TEXT INTEGER Use atoi() -**
    TEXT FLOAT Use atof() +**
    FLOAT BLOB [CAST] to BLOB +**
    TEXT INTEGER [CAST] to INTEGER +**
    TEXT FLOAT [CAST] to REAL **
    TEXT BLOB No change -**
    BLOB INTEGER Convert to TEXT then use atoi() -**
    BLOB FLOAT Convert to TEXT then use atof() +**
    BLOB INTEGER [CAST] to INTEGER +**
    BLOB FLOAT [CAST] to REAL **
    BLOB TEXT Add a zero terminator if needed **
    ** )^ @@ -3517,7 +3940,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or ** [sqlite3_finalize()] is called. ^The memory space used to hold strings ** and BLOBs is freed automatically. Do not pass the pointers returned -** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into +** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** ** ^(If a memory allocation error occurs during the evaluation of any @@ -3626,15 +4049,24 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); ** ** ^The fourth parameter, eTextRep, specifies what ** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. Every SQL function implementation must be able to work -** with UTF-8, UTF-16le, or UTF-16be. But some implementations may be -** more efficient with one encoding than another. ^An application may -** invoke sqlite3_create_function() or sqlite3_create_function16() multiple -** times with the same function but with different values of eTextRep. +** its parameters. The application should set this parameter to +** [SQLITE_UTF16LE] if the function implementation invokes +** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the +** implementation invokes [sqlite3_value_text16be()] on an input, or +** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8] +** otherwise. ^The same SQL function may be registered multiple times using +** different preferred text encodings, with different implementations for +** each encoding. ** ^When multiple implementations of the same function are available, SQLite ** will pick the one that involves the least amount of data conversion. -** If there is only a single implementation which does not care what text -** encoding is used, then the fourth argument should be [SQLITE_ANY]. +** +** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC] +** to signal that the function will always return the same result given +** the same inputs within a single SQL statement. Most SQL functions are +** deterministic. The built-in [random()] SQL function is an example of a +** function that is not deterministic. The SQLite query planner is able to +** perform additional optimizations on deterministic functions, so use +** of the [SQLITE_DETERMINISTIC] flag is recommended where possible. ** ** ^(The fifth parameter is an arbitrary pointer. The implementation of the ** function can gain access to this pointer using [sqlite3_user_data()].)^ @@ -3720,9 +4152,19 @@ SQLITE_API int sqlite3_create_function_v2( #define SQLITE_UTF16LE 2 #define SQLITE_UTF16BE 3 #define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* sqlite3_create_function only */ +#define SQLITE_ANY 5 /* Deprecated */ #define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ +/* +** CAPI3REF: Function Flags +** +** These constants may be ORed together with the +** [SQLITE_UTF8 | preferred text encoding] as the fourth argument +** to [sqlite3_create_function()], [sqlite3_create_function16()], or +** [sqlite3_create_function_v2()]. +*/ +#define SQLITE_DETERMINISTIC 0x800 + /* ** CAPI3REF: Deprecated Functions ** DEPRECATED @@ -3739,7 +4181,8 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*); SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void); SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void); -SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64); +SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int), + void*,sqlite3_int64); #endif /* @@ -3762,7 +4205,7 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** object results in undefined behavior. ** ** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object +** except that these routines take a single [protected sqlite3_value] object ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. ** ** ^The sqlite3_value_text16() interface extracts a UTF-16 string @@ -3819,14 +4262,17 @@ SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); ** In those cases, sqlite3_aggregate_context() might be called for the ** first time from within xFinal().)^ ** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is -** less than or equal to zero or if a memory allocate error occurs. +** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer +** when first called if N is less than or equal to zero or if a memory +** allocate error occurs. ** ** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is ** determined by the N parameter on first successful call. Changing the ** value of N in subsequent call to sqlite3_aggregate_context() within ** the same aggregate function instance will not resize the memory -** allocation.)^ +** allocation.)^ Within the xFinal callback, it is customary to set +** N=0 in calls to sqlite3_aggregate_context(C,N) so that no +** pointless memory allocations occur. ** ** ^SQLite automatically frees the memory allocated by ** sqlite3_aggregate_context() when the aggregate query concludes. @@ -3869,41 +4315,49 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); /* ** CAPI3REF: Function Auxiliary Data ** -** The following two functions may be used by scalar SQL functions to +** These functions may be used by (non-aggregate) SQL functions to ** associate metadata with argument values. If the same value is passed to ** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. This may -** be used, for example, to add a regular-expression matching scalar -** function. The compiled version of the regular expression is stored as -** metadata associated with the SQL value passed as the regular expression -** pattern. The compiled regular expression can be reused on multiple -** invocations of the same function so that the original pattern string -** does not need to be recompiled on each invocation. +** some circumstances the associated metadata may be preserved. An example +** of where this might be useful is in a regular-expression matching +** function. The compiled version of the regular expression can be stored as +** metadata associated with the pattern string. +** Then as long as the pattern string remains the same, +** the compiled regular expression can be reused on multiple +** invocations of the same function. ** ** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata ** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If no metadata has been ever -** been set for the Nth argument of the function, or if the corresponding -** function parameter has changed since the meta-data was set, -** then sqlite3_get_auxdata() returns a NULL pointer. -** -** ^The sqlite3_set_auxdata() interface saves the metadata -** pointed to by its 3rd parameter as the metadata for the N-th -** argument of the application-defined function. Subsequent -** calls to sqlite3_get_auxdata() might return this data, if it has -** not been destroyed. -** ^If it is not NULL, SQLite will invoke the destructor -** function given by the 4th parameter to sqlite3_set_auxdata() on -** the metadata when the corresponding function parameter changes -** or when the SQL statement completes, whichever comes first. -** -** SQLite is free to call the destructor and drop metadata on any -** parameter of any function at any time. ^The only guarantee is that -** the destructor will be called before the metadata is dropped. +** value to the application-defined function. ^If there is no metadata +** associated with the function argument, this sqlite3_get_auxdata() interface +** returns a NULL pointer. +** +** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th +** argument of the application-defined function. ^Subsequent +** calls to sqlite3_get_auxdata(C,N) return P from the most recent +** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or +** NULL if the metadata has been discarded. +** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL, +** SQLite will invoke the destructor function X with parameter P exactly +** once, when the metadata is discarded. +** SQLite is free to discard the metadata at any time, including:
      +**
    • when the corresponding function parameter changes, or +**
    • when [sqlite3_reset()] or [sqlite3_finalize()] is called for the +** SQL statement, or +**
    • when sqlite3_set_auxdata() is invoked again on the same parameter, or +**
    • during the original sqlite3_set_auxdata() call when a memory +** allocation error occurs.
    )^ +** +** Note the last bullet in particular. The destructor X in +** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the +** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata() +** should be called near the end of the function implementation and the +** function implementation should not make any use of P after +** sqlite3_set_auxdata() has been called. ** ** ^(In practice, metadata is preserved between function calls for -** expressions that are constant at compile time. This includes literal -** values and [parameters].)^ +** function parameters that are compile-time constants, including literal +** values and [parameters] and expressions composed from the same.)^ ** ** These routines must be called from the same thread in which ** the SQL function is running. @@ -3924,7 +4378,7 @@ SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(voi ** the content before returning. ** ** The typedef is necessary to work around problems in certain -** C++ compilers. See ticket #2191. +** C++ compilers. */ typedef void (*sqlite3_destructor_type)(void*); #define SQLITE_STATIC ((sqlite3_destructor_type)0) @@ -3977,11 +4431,11 @@ typedef void (*sqlite3_destructor_type)(void*); ** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() ** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. ** -** ^The sqlite3_result_toobig() interface causes SQLite to throw an error -** indicating that a string or BLOB is too long to represent. +** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an +** error indicating that a string or BLOB is too long to represent. ** -** ^The sqlite3_result_nomem() interface causes SQLite to throw an error -** indicating that a memory allocation failed. +** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an +** error indicating that a memory allocation failed. ** ** ^The sqlite3_result_int() interface sets the return value ** of the application-defined function to be the 32-bit signed integer @@ -3998,6 +4452,10 @@ typedef void (*sqlite3_destructor_type)(void*); ** set the return value of the application-defined function to be ** a text string which is represented as UTF-8, UTF-16 native byte order, ** UTF-16 little endian, or UTF-16 big endian, respectively. +** ^The sqlite3_result_text64() interface sets the return value of an +** application-defined function to be a text string in an encoding +** specified by the fifth (and last) parameter, which must be one +** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. ** ^SQLite takes the text result from the application from ** the 2nd parameter of the sqlite3_result_text* interfaces. ** ^If the 3rd parameter to the sqlite3_result_text* interfaces @@ -4006,7 +4464,12 @@ typedef void (*sqlite3_destructor_type)(void*); ** ^If the 3rd parameter to the sqlite3_result_text* interfaces ** is non-negative, then as many bytes (not characters) of the text ** pointed to by the 2nd parameter are taken as the application-defined -** function result. +** function result. If the 3rd parameter is non-negative, then it +** must be the byte offset into the string where the NUL terminator would +** appear if the string where NUL terminated. If any NUL characters occur +** in the string at a byte offset that is less than the value of the 3rd +** parameter, then the resulting string will contain embedded NULs and the +** result of expressions operating on strings with embedded NULs is undefined. ** ^If the 4th parameter to the sqlite3_result_text* interfaces ** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that ** function as the destructor on the text or BLOB result when it has @@ -4036,6 +4499,7 @@ typedef void (*sqlite3_destructor_type)(void*); ** the [sqlite3_context] pointer, the results are undefined. */ SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,sqlite3_uint64,void(*)(void*)); SQLITE_API void sqlite3_result_double(sqlite3_context*, double); SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); @@ -4046,6 +4510,8 @@ SQLITE_API void sqlite3_result_int(sqlite3_context*, int); SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); SQLITE_API void sqlite3_result_null(sqlite3_context*); SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); @@ -4203,6 +4669,11 @@ SQLITE_API int sqlite3_key( sqlite3 *db, /* Database to be rekeyed */ const void *pKey, int nKey /* The key */ ); +SQLITE_API int sqlite3_key_v2( + sqlite3 *db, /* Database to be rekeyed */ + const char *zDbName, /* Name of the database */ + const void *pKey, int nKey /* The key */ +); /* ** Change the key on an open database. If the current database is not @@ -4216,6 +4687,11 @@ SQLITE_API int sqlite3_rekey( sqlite3 *db, /* Database to be rekeyed */ const void *pKey, int nKey /* The new key */ ); +SQLITE_API int sqlite3_rekey_v2( + sqlite3 *db, /* Database to be rekeyed */ + const char *zDbName, /* Name of the database */ + const void *pKey, int nKey /* The new key */ +); /* ** Specify the activation key for a SEE database. Unless @@ -4265,6 +4741,13 @@ SQLITE_API int sqlite3_sleep(int); ** is a NULL pointer, then SQLite performs a search for an appropriate ** temporary file directory. ** +** Applications are strongly discouraged from using this global variable. +** It is required to set a temporary folder on Windows Runtime (WinRT). +** But for all other platforms, it is highly recommended that applications +** neither read nor write this variable. This global variable is a relic +** that exists for backwards compatibility of legacy applications and should +** be avoided in new projects. +** ** It is not safe to read or modify this variable in more than one ** thread at a time. It is not safe to read or modify this variable ** if a [database connection] is being used at the same time in a separate @@ -4283,9 +4766,66 @@ SQLITE_API int sqlite3_sleep(int); ** Hence, if this variable is modified directly, either it should be ** made NULL or made to point to memory obtained from [sqlite3_malloc] ** or else the use of the [temp_store_directory pragma] should be avoided. +** Except when requested by the [temp_store_directory pragma], SQLite +** does not free the memory that sqlite3_temp_directory points to. If +** the application wants that memory to be freed, it must do +** so itself, taking care to only do so after all [database connection] +** objects have been destroyed. +** +** Note to Windows Runtime users: The temporary directory must be set +** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various +** features that require the use of temporary files may fail. Here is an +** example of how to do this using C++ with the Windows Runtime: +** +** 
    +** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
+**       TemporaryFolder->Path->Data();
+** char zPathBuf[MAX_PATH + 1];
+** memset(zPathBuf, 0, sizeof(zPathBuf));
+** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
+**       NULL, NULL);
+** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
+**
    */ SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory; +/* +** CAPI3REF: Name Of The Folder Holding Database Files +** +** ^(If this global variable is made to point to a string which is +** the name of a folder (a.k.a. directory), then all database files +** specified with a relative pathname and created or accessed by +** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed +** to be relative to that directory.)^ ^If this variable is a NULL +** pointer, then SQLite assumes that all database files specified +** with a relative pathname are relative to the current directory +** for the process. Only the windows VFS makes use of this global +** variable; it is ignored by the unix VFS. +** +** Changing the value of this variable while a database connection is +** open can result in a corrupt database. +** +** It is not safe to read or modify this variable in more than one +** thread at a time. It is not safe to read or modify this variable +** if a [database connection] is being used at the same time in a separate +** thread. +** It is intended that this variable be set once +** as part of process initialization and before any SQLite interface +** routines have been called and that this variable remain unchanged +** thereafter. +** +** ^The [data_store_directory pragma] may modify this variable and cause +** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, +** the [data_store_directory pragma] always assumes that any string +** that this variable points to is held in memory obtained from +** [sqlite3_malloc] and the pragma may attempt to free that memory +** using [sqlite3_free]. +** Hence, if this variable is modified directly, either it should be +** made NULL or made to point to memory obtained from [sqlite3_malloc] +** or else the use of the [data_store_directory pragma] should be avoided. +*/ +SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory; + /* ** CAPI3REF: Test For Auto-Commit Mode ** KEYWORDS: {autocommit mode} @@ -4321,6 +4861,31 @@ SQLITE_API int sqlite3_get_autocommit(sqlite3*); */ SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*); +/* +** CAPI3REF: Return The Filename For A Database Connection +** +** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename +** associated with database N of connection D. ^The main database file +** has the name "main". If there is no attached database N on the database +** connection D, or if database N is a temporary or in-memory database, then +** a NULL pointer is returned. +** +** ^The filename returned by this function is the output of the +** xFullPathname method of the [VFS]. ^In other words, the filename +** will be an absolute pathname, even if the filename used +** to open the database originally was a URI or relative pathname. +*/ +SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName); + +/* +** CAPI3REF: Determine if a database is read-only +** +** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N +** of connection D is read-only, 0 if it is read/write, or -1 if N is not +** the name of a database on connection D. +*/ +SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName); + /* ** CAPI3REF: Find the next prepared statement ** @@ -4356,13 +4921,15 @@ SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt); ** on the same [database connection] D, or NULL for ** the first call for each function on D. ** +** The commit and rollback hook callbacks are not reentrant. ** The callback implementation must not do anything that will modify ** the database connection that invoked the callback. Any actions ** to modify the database connection must be deferred until after the ** completion of the [sqlite3_step()] call that triggered the commit ** or rollback hook in the first place. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. +** Note that running any other SQL statements, including SELECT statements, +** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify +** the database connections for the meaning of "modify" in this paragraph. ** ** ^Registering a NULL function disables the callback. ** @@ -4388,12 +4955,13 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^The sqlite3_update_hook() interface registers a callback function ** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted. +** to be invoked whenever a row is updated, inserted or deleted in +** a rowid table. ** ^Any callback set by a previous call to this function ** for the same database connection is overridden. ** ** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted. +** row is updated, inserted or deleted in a rowid table. ** ^The first argument to the callback is a copy of the third argument ** to sqlite3_update_hook(). ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], @@ -4406,6 +4974,7 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^(The update hook is not invoked when internal system tables are ** modified (i.e. sqlite_master and sqlite_sequence).)^ +** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified. ** ** ^In the current implementation, the update hook ** is not invoked when duplication rows are deleted because of an @@ -4437,7 +5006,6 @@ SQLITE_API void *sqlite3_update_hook( /* ** CAPI3REF: Enable Or Disable Shared Pager Cache -** KEYWORDS: {shared cache} ** ** ^(This routine enables or disables the sharing of the database cache ** and schema data structures between [database connection | connections] @@ -4460,6 +5028,9 @@ SQLITE_API void *sqlite3_update_hook( ** future releases of SQLite. Applications that care about shared ** cache setting should set it explicitly. ** +** This interface is threadsafe on processors where writing a +** 32-bit integer is atomic. +** ** See Also: [SQLite Shared-Cache Mode] */ SQLITE_API int sqlite3_enable_shared_cache(int); @@ -4475,9 +5046,24 @@ SQLITE_API int sqlite3_enable_shared_cache(int); ** which might be more or less than the amount requested. ** ^The sqlite3_release_memory() routine is a no-op returning zero ** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT]. +** +** See also: [sqlite3_db_release_memory()] */ SQLITE_API int sqlite3_release_memory(int); +/* +** CAPI3REF: Free Memory Used By A Database Connection +** +** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap +** memory as possible from database connection D. Unlike the +** [sqlite3_release_memory()] interface, this interface is in effect even +** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is +** omitted. +** +** See also: [sqlite3_release_memory()] +*/ +SQLITE_API int sqlite3_db_release_memory(sqlite3*); + /* ** CAPI3REF: Impose A Limit On Heap Size ** @@ -4492,7 +5078,8 @@ SQLITE_API int sqlite3_release_memory(int); ** is advisory only. ** ** ^The return value from sqlite3_soft_heap_limit64() is the size of -** the soft heap limit prior to the call. ^If the argument N is negative +** the soft heap limit prior to the call, or negative in the case of an +** error. ^If the argument N is negative ** then no change is made to the soft heap limit. Hence, the current ** size of the soft heap limit can be determined by invoking ** sqlite3_soft_heap_limit64() with a negative argument. @@ -4508,7 +5095,7 @@ SQLITE_API int sqlite3_release_memory(int); ** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and ** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option. **
  • An alternative page cache implementation is specified using -** [sqlite3_config]([SQLITE_CONFIG_PCACHE],...). +** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...). **
  • The page cache allocates from its own memory pool supplied ** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than ** from the heap. @@ -4621,11 +5208,20 @@ SQLITE_API int sqlite3_table_column_metadata( ** ^This interface loads an SQLite extension library from the named file. ** ** ^The sqlite3_load_extension() interface attempts to load an -** SQLite extension library contained in the file zFile. +** [SQLite extension] library contained in the file zFile. If +** the file cannot be loaded directly, attempts are made to load +** with various operating-system specific extensions added. +** So for example, if "samplelib" cannot be loaded, then names like +** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might +** be tried also. ** ** ^The entry point is zProc. -** ^zProc may be 0, in which case the name of the entry point -** defaults to "sqlite3_extension_init". +** ^(zProc may be 0, in which case SQLite will try to come up with an +** entry point name on its own. It first tries "sqlite3_extension_init". +** If that does not work, it constructs a name "sqlite3_X_init" where the +** X is consists of the lower-case equivalent of all ASCII alphabetic +** characters in the filename from the last "/" to the first following +** "." and omitting any initial "lib".)^ ** ^The sqlite3_load_extension() interface returns ** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. ** ^If an error occurs and pzErrMsg is not 0, then the @@ -4651,11 +5247,11 @@ SQLITE_API int sqlite3_load_extension( ** CAPI3REF: Enable Or Disable Extension Loading ** ** ^So as not to open security holes in older applications that are -** unprepared to deal with extension loading, and as a means of disabling -** extension loading while evaluating user-entered SQL, the following API +** unprepared to deal with [extension loading], and as a means of disabling +** [extension loading] while evaluating user-entered SQL, the following API ** is provided to turn the [sqlite3_load_extension()] mechanism on and off. ** -** ^Extension loading is off by default. See ticket #1863. +** ^Extension loading is off by default. ** ^Call the sqlite3_enable_load_extension() routine with onoff==1 ** to turn extension loading on and call it with onoff==0 to turn ** it back off again. @@ -4667,7 +5263,7 @@ SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); ** ** ^This interface causes the xEntryPoint() function to be invoked for ** each new [database connection] that is created. The idea here is that -** xEntryPoint() is the entry point for a statically linked SQLite extension +** xEntryPoint() is the entry point for a statically linked [SQLite extension] ** that is to be automatically loaded into all new database connections. ** ** ^(Even though the function prototype shows that xEntryPoint() takes @@ -4695,10 +5291,23 @@ SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); ** on the list of automatic extensions is a harmless no-op. ^No entry point ** will be called more than once for each database connection that is opened. ** -** See also: [sqlite3_reset_auto_extension()]. +** See also: [sqlite3_reset_auto_extension()] +** and [sqlite3_cancel_auto_extension()] */ SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void)); +/* +** CAPI3REF: Cancel Automatic Extension Loading +** +** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the +** initialization routine X that was registered using a prior call to +** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)] +** routine returns 1 if initialization routine X was successfully +** unregistered and it returns 0 if X was not on the list of initialization +** routines. +*/ +SQLITE_API int sqlite3_cancel_auto_extension(void (*xEntryPoint)(void)); + /* ** CAPI3REF: Reset Automatic Extension Loading ** @@ -4823,10 +5432,22 @@ struct sqlite3_module { ** the correct order to satisfy the ORDER BY clause so that no separate ** sorting step is required. ** -** ^The estimatedCost value is an estimate of the cost of doing the -** particular lookup. A full scan of a table with N entries should have -** a cost of N. A binary search of a table of N entries should have a -** cost of approximately log(N). +** ^The estimatedCost value is an estimate of the cost of a particular +** strategy. A cost of N indicates that the cost of the strategy is similar +** to a linear scan of an SQLite table with N rows. A cost of log(N) +** indicates that the expense of the operation is similar to that of a +** binary search on a unique indexed field of an SQLite table with N rows. +** +** ^The estimatedRows value is an estimate of the number of rows that +** will be returned by the strategy. +** +** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info +** structure for SQLite version 3.8.2. If a virtual table extension is +** used with an SQLite version earlier than 3.8.2, the results of attempting +** to read or write the estimatedRows field are undefined (but are likely +** to included crashing the application). The estimatedRows field should +** therefore only be used if [sqlite3_libversion_number()] returns a +** value greater than or equal to 3008002. */ struct sqlite3_index_info { /* Inputs */ @@ -4851,7 +5472,9 @@ struct sqlite3_index_info { char *idxStr; /* String, possibly obtained from sqlite3_malloc */ int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ + double estimatedCost; /* Estimated cost of using this index */ + /* Fields below are only available in SQLite 3.8.2 and later */ + sqlite3_int64 estimatedRows; /* Estimated number of rows returned */ }; /* @@ -5055,6 +5678,9 @@ typedef struct sqlite3_blob sqlite3_blob; ** interface. Use the [UPDATE] SQL command to change the size of a ** blob. ** +** ^The [sqlite3_blob_open()] interface will fail for a [WITHOUT ROWID] +** table. Incremental BLOB I/O is not possible on [WITHOUT ROWID] tables. +** ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces ** and the built-in [zeroblob] SQL function can be used, if desired, ** to create an empty, zero-filled blob in which to read or write using @@ -5249,17 +5875,16 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); ** implementations are available in the SQLite core: ** **
      -**
    • SQLITE_MUTEX_OS2 -**
    • SQLITE_MUTEX_PTHREAD +**
    • SQLITE_MUTEX_PTHREADS **
    • SQLITE_MUTEX_W32 **
    • SQLITE_MUTEX_NOOP **
    )^ ** ** ^The SQLITE_MUTEX_NOOP implementation is a set of routines ** that does no real locking and is appropriate for use in -** a single-threaded application. ^The SQLITE_MUTEX_OS2, -** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations -** are appropriate for use on OS/2, Unix, and Windows. +** a single-threaded application. ^The SQLITE_MUTEX_PTHREADS and +** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix +** and Windows. ** ** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex @@ -5280,10 +5905,12 @@ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); **
  • SQLITE_MUTEX_RECURSIVE **
  • SQLITE_MUTEX_STATIC_MASTER **
  • SQLITE_MUTEX_STATIC_MEM -**
  • SQLITE_MUTEX_STATIC_MEM2 +**
  • SQLITE_MUTEX_STATIC_OPEN **
  • SQLITE_MUTEX_STATIC_PRNG **
  • SQLITE_MUTEX_STATIC_LRU -**
  • SQLITE_MUTEX_STATIC_LRU2 +**
  • SQLITE_MUTEX_STATIC_PMEM +**
  • SQLITE_MUTEX_STATIC_APP1 +**
  • SQLITE_MUTEX_STATIC_APP2 ** )^ ** ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) @@ -5448,7 +6075,7 @@ struct sqlite3_mutex_methods { ** ^These routines should return true if the mutex in their argument ** is held or not held, respectively, by the calling thread. ** -** ^The implementation is not required to provided versions of these +** ^The implementation is not required to provide versions of these ** routines that actually work. If the implementation does not provide working ** versions of these routines, it should at least provide stubs that always ** return true so that one does not get spurious assertion failures. @@ -5487,6 +6114,9 @@ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*); #define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ #define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */ #define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */ +#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */ /* ** CAPI3REF: Retrieve the mutex for a database connection @@ -5576,10 +6206,15 @@ SQLITE_API int sqlite3_test_control(int op, ...); #define SQLITE_TESTCTRL_RESERVE 14 #define SQLITE_TESTCTRL_OPTIMIZATIONS 15 #define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_PGHDRSZ 17 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 18 -#define SQLITE_TESTCTRL_LOCALTIME_FAULT 19 -#define SQLITE_TESTCTRL_LAST 19 +#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 +#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 +#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ +#define SQLITE_TESTCTRL_NEVER_CORRUPT 20 +#define SQLITE_TESTCTRL_VDBE_COVERAGE 21 +#define SQLITE_TESTCTRL_BYTEORDER 22 +#define SQLITE_TESTCTRL_ISINIT 23 +#define SQLITE_TESTCTRL_SORTER_MMAP 24 +#define SQLITE_TESTCTRL_LAST 24 /* ** CAPI3REF: SQLite Runtime Status @@ -5770,12 +6405,12 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r ** the current value is always zero.)^ ** ** [[SQLITE_DBSTATUS_CACHE_USED]] ^(
    SQLITE_DBSTATUS_CACHE_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** memory used by all pager caches associated with the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0. ** ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(
    SQLITE_DBSTATUS_SCHEMA_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** memory used to store the schema for all databases associated ** with the connection - main, temp, and any [ATTACH]-ed databases.)^ ** ^The full amount of memory used by the schemas is reported, even if the @@ -5784,11 +6419,40 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0. ** ** [[SQLITE_DBSTATUS_STMT_USED]] ^(
    SQLITE_DBSTATUS_STMT_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** and lookaside memory used by all prepared statements associated with ** the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0. **
    +** +** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(
    SQLITE_DBSTATUS_CACHE_HIT
    +**
    This parameter returns the number of pager cache hits that have +** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT +** is always 0. +**
    +** +** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(
    SQLITE_DBSTATUS_CACHE_MISS
    +**
    This parameter returns the number of pager cache misses that have +** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS +** is always 0. +**
    +** +** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(
    SQLITE_DBSTATUS_CACHE_WRITE
    +**
    This parameter returns the number of dirty cache entries that have +** been written to disk. Specifically, the number of pages written to the +** wal file in wal mode databases, or the number of pages written to the +** database file in rollback mode databases. Any pages written as part of +** transaction rollback or database recovery operations are not included. +** If an IO or other error occurs while writing a page to disk, the effect +** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The +** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. +**
    +** +** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(
    SQLITE_DBSTATUS_DEFERRED_FKS
    +**
    This parameter returns zero for the current value if and only if +** all foreign key constraints (deferred or immediate) have been +** resolved.)^ ^The highwater mark is always 0. +**
    ** */ #define SQLITE_DBSTATUS_LOOKASIDE_USED 0 @@ -5798,7 +6462,11 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r #define SQLITE_DBSTATUS_LOOKASIDE_HIT 4 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6 -#define SQLITE_DBSTATUS_MAX 6 /* Largest defined DBSTATUS */ +#define SQLITE_DBSTATUS_CACHE_HIT 7 +#define SQLITE_DBSTATUS_CACHE_MISS 8 +#define SQLITE_DBSTATUS_CACHE_WRITE 9 +#define SQLITE_DBSTATUS_DEFERRED_FKS 10 +#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */ /* @@ -5853,11 +6521,20 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); ** improvement performance by adding permanent indices that do not ** need to be reinitialized each time the statement is run. ** +** [[SQLITE_STMTSTATUS_VM_STEP]]
    SQLITE_STMTSTATUS_VM_STEP
    +**
    ^This is the number of virtual machine operations executed +** by the prepared statement if that number is less than or equal +** to 2147483647. The number of virtual machine operations can be +** used as a proxy for the total work done by the prepared statement. +** If the number of virtual machine operations exceeds 2147483647 +** then the value returned by this statement status code is undefined. +**
    ** */ #define SQLITE_STMTSTATUS_FULLSCAN_STEP 1 #define SQLITE_STMTSTATUS_SORT 2 #define SQLITE_STMTSTATUS_AUTOINDEX 3 +#define SQLITE_STMTSTATUS_VM_STEP 4 /* ** CAPI3REF: Custom Page Cache Object @@ -5868,17 +6545,33 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); ** sqlite3_pcache object except by holding and passing pointers ** to the object. ** -** See [sqlite3_pcache_methods] for additional information. +** See [sqlite3_pcache_methods2] for additional information. */ typedef struct sqlite3_pcache sqlite3_pcache; +/* +** CAPI3REF: Custom Page Cache Object +** +** The sqlite3_pcache_page object represents a single page in the +** page cache. The page cache will allocate instances of this +** object. Various methods of the page cache use pointers to instances +** of this object as parameters or as their return value. +** +** See [sqlite3_pcache_methods2] for additional information. +*/ +typedef struct sqlite3_pcache_page sqlite3_pcache_page; +struct sqlite3_pcache_page { + void *pBuf; /* The content of the page */ + void *pExtra; /* Extra information associated with the page */ +}; + /* ** CAPI3REF: Application Defined Page Cache. ** KEYWORDS: {page cache} ** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can +** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can ** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods structure.)^ +** instance of the sqlite3_pcache_methods2 structure.)^ ** In many applications, most of the heap memory allocated by ** SQLite is used for the page cache. ** By implementing a @@ -5892,7 +6585,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** extreme measure that is only needed by the most demanding applications. ** The built-in page cache is recommended for most uses. ** -** ^(The contents of the sqlite3_pcache_methods structure are copied to an +** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an ** internal buffer by SQLite within the call to [sqlite3_config]. Hence ** the application may discard the parameter after the call to ** [sqlite3_config()] returns.)^ @@ -5901,7 +6594,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ^(The xInit() method is called once for each effective ** call to [sqlite3_initialize()])^ ** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods.pArg value.)^ +** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^ ** The intent of the xInit() method is to set up global data structures ** required by the custom page cache implementation. ** ^(If the xInit() method is NULL, then the @@ -5928,17 +6621,15 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** SQLite will typically create one cache instance for each open database file, ** though this is not guaranteed. ^The ** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will not be a power of two. ^szPage -** will the page size of the database file that is to be cached plus an -** increment (here called "R") of less than 250. SQLite will use the -** extra R bytes on each page to store metadata about the underlying -** database page on disk. The value of R depends +** be allocated by the cache. ^szPage will always a power of two. ^The +** second parameter szExtra is a number of bytes of extra storage +** associated with each page cache entry. ^The szExtra parameter will +** a number less than 250. SQLite will use the +** extra szExtra bytes on each page to store metadata about the underlying +** database page on disk. The value passed into szExtra depends ** on the SQLite version, the target platform, and how SQLite was compiled. -** ^(R is constant for a particular build of SQLite. Except, there are two -** distinct values of R when SQLite is compiled with the proprietary -** ZIPVFS extension.)^ ^The second argument to -** xCreate(), bPurgeable, is true if the cache being created will -** be used to cache database pages of a file stored on disk, or +** ^The third argument to xCreate(), bPurgeable, is true if the cache being +** created will be used to cache database pages of a file stored on disk, or ** false if it is used for an in-memory database. The cache implementation ** does not have to do anything special based with the value of bPurgeable; ** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will @@ -5962,11 +6653,16 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ** [[the xFetch() page cache methods]] ** The xFetch() method locates a page in the cache and returns a pointer to -** the page, or a NULL pointer. -** A "page", in this context, means a buffer of szPage bytes aligned at an -** 8-byte boundary. The page to be fetched is determined by the key. ^The -** minimum key value is 1. After it has been retrieved using xFetch, the page -** is considered to be "pinned". +** an sqlite3_pcache_page object associated with that page, or a NULL pointer. +** The pBuf element of the returned sqlite3_pcache_page object will be a +** pointer to a buffer of szPage bytes used to store the content of a +** single database page. The pExtra element of sqlite3_pcache_page will be +** a pointer to the szExtra bytes of extra storage that SQLite has requested +** for each entry in the page cache. +** +** The page to be fetched is determined by the key. ^The minimum key value +** is 1. After it has been retrieved using xFetch, the page is considered +** to be "pinned". ** ** If the requested page is already in the page cache, then the page cache ** implementation must return a pointer to the page buffer with its content @@ -5975,7 +6671,7 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** parameter to help it determined what action to take: ** ** -**
    createFlag Behaviour when page is not already in cache +**
    createFlag Behavior when page is not already in cache **
    0 Do not allocate a new page. Return NULL. **
    1 Allocate a new page if it easy and convenient to do so. ** Otherwise return NULL. @@ -6019,8 +6715,37 @@ typedef struct sqlite3_pcache sqlite3_pcache; ** ^The xDestroy() method is used to delete a cache allocated by xCreate(). ** All resources associated with the specified cache should be freed. ^After ** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods +** handle invalid, and will not use it with any other sqlite3_pcache_methods2 ** functions. +** +** [[the xShrink() page cache method]] +** ^SQLite invokes the xShrink() method when it wants the page cache to +** free up as much of heap memory as possible. The page cache implementation +** is not obligated to free any memory, but well-behaved implementations should +** do their best. +*/ +typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2; +struct sqlite3_pcache_methods2 { + int iVersion; + void *pArg; + int (*xInit)(void*); + void (*xShutdown)(void*); + sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable); + void (*xCachesize)(sqlite3_pcache*, int nCachesize); + int (*xPagecount)(sqlite3_pcache*); + sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); + void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard); + void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*, + unsigned oldKey, unsigned newKey); + void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); + void (*xDestroy)(sqlite3_pcache*); + void (*xShrink)(sqlite3_pcache*); +}; + +/* +** This is the obsolete pcache_methods object that has now been replaced +** by sqlite3_pcache_methods2. This object is not used by SQLite. It is +** retained in the header file for backwards compatibility only. */ typedef struct sqlite3_pcache_methods sqlite3_pcache_methods; struct sqlite3_pcache_methods { @@ -6037,6 +6762,7 @@ struct sqlite3_pcache_methods { void (*xDestroy)(sqlite3_pcache*); }; + /* ** CAPI3REF: Online Backup Object ** @@ -6366,17 +7092,33 @@ SQLITE_API int sqlite3_unlock_notify( /* ** CAPI3REF: String Comparison ** -** ^The [sqlite3_strnicmp()] API allows applications and extensions to -** compare the contents of two buffers containing UTF-8 strings in a -** case-independent fashion, using the same definition of case independence -** that SQLite uses internally when comparing identifiers. +** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications +** and extensions to compare the contents of two buffers containing UTF-8 +** strings in a case-independent fashion, using the same definition of "case +** independence" that SQLite uses internally when comparing identifiers. */ +SQLITE_API int sqlite3_stricmp(const char *, const char *); SQLITE_API int sqlite3_strnicmp(const char *, const char *, int); +/* +** CAPI3REF: String Globbing +* +** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches +** the glob pattern P, and it returns non-zero if string X does not match +** the glob pattern P. ^The definition of glob pattern matching used in +** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the +** SQL dialect used by SQLite. ^The sqlite3_strglob(P,X) function is case +** sensitive. +** +** Note that this routine returns zero on a match and non-zero if the strings +** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()]. +*/ +SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr); + /* ** CAPI3REF: Error Logging Interface ** -** ^The [sqlite3_log()] interface writes a message into the error log +** ^The [sqlite3_log()] interface writes a message into the [error log] ** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. ** ^If logging is enabled, the zFormat string and subsequent arguments are ** used with [sqlite3_snprintf()] to generate the final output string. @@ -6456,6 +7198,9 @@ SQLITE_API void *sqlite3_wal_hook( ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface ** from SQL. ** +** ^Checkpoints initiated by this mechanism are +** [sqlite3_wal_checkpoint_v2|PASSIVE]. +** ** ^Every new [database connection] defaults to having the auto-checkpoint ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT] ** pages. The use of this interface @@ -6472,6 +7217,10 @@ SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N); ** empty string, then a checkpoint is run on all databases of ** connection D. ^If the database connection D is not in ** [WAL | write-ahead log mode] then this interface is a harmless no-op. +** ^The [sqlite3_wal_checkpoint(D,X)] interface initiates a +** [sqlite3_wal_checkpoint_v2|PASSIVE] checkpoint. +** Use the [sqlite3_wal_checkpoint_v2()] interface to get a FULL +** or RESET checkpoint. ** ** ^The [wal_checkpoint pragma] can be used to invoke this interface ** from SQL. ^The [sqlite3_wal_autocheckpoint()] interface and the @@ -6494,10 +7243,12 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); ** Checkpoint as many frames as possible without waiting for any database ** readers or writers to finish. Sync the db file if all frames in the log ** are checkpointed. This mode is the same as calling -** sqlite3_wal_checkpoint(). The busy-handler callback is never invoked. +** sqlite3_wal_checkpoint(). The [sqlite3_busy_handler|busy-handler callback] +** is never invoked. ** **
    SQLITE_CHECKPOINT_FULL
    -** This mode blocks (calls the busy-handler callback) until there is no +** This mode blocks (it invokes the +** [sqlite3_busy_handler|busy-handler callback]) until there is no ** database writer and all readers are reading from the most recent database ** snapshot. It then checkpoints all frames in the log file and syncs the ** database file. This call blocks database writers while it is running, @@ -6505,7 +7256,8 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); ** **
    SQLITE_CHECKPOINT_RESTART
    ** This mode works the same way as SQLITE_CHECKPOINT_FULL, except after -** checkpointing the log file it blocks (calls the busy-handler callback) +** checkpointing the log file it blocks (calls the +** [sqlite3_busy_handler|busy-handler callback]) ** until all readers are reading from the database file only. This ensures ** that the next client to write to the database file restarts the log file ** from the beginning. This call blocks database writers while it is running, @@ -6643,6 +7395,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); /* ** CAPI3REF: Conflict resolution modes +** KEYWORDS: {conflict resolution mode} ** ** These constants are returned by [sqlite3_vtab_on_conflict()] to ** inform a [virtual table] implementation what the [ON CONFLICT] mode @@ -6671,7 +7424,7 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); #ifdef __cplusplus } /* End of the 'extern "C"' block */ #endif -#endif +#endif /* _SQLITE3_H_ */ /* ** 2010 August 30 @@ -6695,6 +7448,16 @@ extern "C" { #endif typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; +typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info; + +/* The double-precision datatype used by RTree depends on the +** SQLITE_RTREE_INT_ONLY compile-time option. +*/ +#ifdef SQLITE_RTREE_INT_ONLY + typedef sqlite3_int64 sqlite3_rtree_dbl; +#else + typedef double sqlite3_rtree_dbl; +#endif /* ** Register a geometry callback named zGeom that can be used as part of an @@ -6705,7 +7468,7 @@ typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; SQLITE_API int sqlite3_rtree_geometry_callback( sqlite3 *db, const char *zGeom, - int (*xGeom)(sqlite3_rtree_geometry *, int nCoord, double *aCoord, int *pRes), + int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*), void *pContext ); @@ -6717,11 +7480,60 @@ SQLITE_API int sqlite3_rtree_geometry_callback( struct sqlite3_rtree_geometry { void *pContext; /* Copy of pContext passed to s_r_g_c() */ int nParam; /* Size of array aParam[] */ - double *aParam; /* Parameters passed to SQL geom function */ + sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */ void *pUser; /* Callback implementation user data */ void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */ }; +/* +** Register a 2nd-generation geometry callback named zScore that can be +** used as part of an R-Tree geometry query as follows: +** +** SELECT ... FROM WHERE MATCH $zQueryFunc(... params ...) +*/ +SQLITE_API int sqlite3_rtree_query_callback( + sqlite3 *db, + const char *zQueryFunc, + int (*xQueryFunc)(sqlite3_rtree_query_info*), + void *pContext, + void (*xDestructor)(void*) +); + + +/* +** A pointer to a structure of the following type is passed as the +** argument to scored geometry callback registered using +** sqlite3_rtree_query_callback(). +** +** Note that the first 5 fields of this structure are identical to +** sqlite3_rtree_geometry. This structure is a subclass of +** sqlite3_rtree_geometry. +*/ +struct sqlite3_rtree_query_info { + void *pContext; /* pContext from when function registered */ + int nParam; /* Number of function parameters */ + sqlite3_rtree_dbl *aParam; /* value of function parameters */ + void *pUser; /* callback can use this, if desired */ + void (*xDelUser)(void*); /* function to free pUser */ + sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */ + unsigned int *anQueue; /* Number of pending entries in the queue */ + int nCoord; /* Number of coordinates */ + int iLevel; /* Level of current node or entry */ + int mxLevel; /* The largest iLevel value in the tree */ + sqlite3_int64 iRowid; /* Rowid for current entry */ + sqlite3_rtree_dbl rParentScore; /* Score of parent node */ + int eParentWithin; /* Visibility of parent node */ + int eWithin; /* OUT: Visiblity */ + sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ +}; + +/* +** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin. +*/ +#define NOT_WITHIN 0 /* Object completely outside of query region */ +#define PARTLY_WITHIN 1 /* Object partially overlaps query region */ +#define FULLY_WITHIN 2 /* Object fully contained within query region */ + #ifdef __cplusplus } /* end of the 'extern "C"' block */ -- 2.25.1