From 055d969332d511a33c0bce248cf1adf90a51a9fb Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 11 Nov 2011 14:03:38 +0100 Subject: [PATCH] USB: mx51evk: add end enable USB host support on port 1 Signed-off-by: Wolfgang Grandegger Cc: Stefano Babic Cc: Remy Bohmer Cc: Wolfgang Grandegger Cc: Jason Liu --- board/freescale/mx51evk/mx51evk.c | 62 +++++++++++++++++++++++++++++++ include/configs/mx51evk.h | 13 +++++++ 2 files changed, 75 insertions(+) diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index e5b0929f65..13c59413ec 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -35,6 +35,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -172,6 +173,64 @@ static void setup_iomux_spi(void) } #endif +#ifdef CONFIG_USB_EHCI_MX5 +#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ +#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ +#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ +#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ + +#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ + PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) +#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ + PAD_CTL_SRE_FAST) +#define NO_PAD (1 << 16) + +static void setup_usb_h1(void) +{ + setup_iomux_usb_h1(); + + /* GPIO_1_7 for USBH1 hub reset */ + mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); + + /* GPIO_2_1 */ + mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); + + /* GPIO_2_5 for USB PHY reset */ + mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); +} + +void board_ehci_hcd_init(int port) +{ + /* Set USBH1_STP to GPIO and toggle it */ + mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); + mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + + gpio_direction_output(MX51EVK_USBH1_STP, 0); + gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); + mdelay(10); + gpio_set_value(MX51EVK_USBH1_STP, 1); + + /* Set back USBH1_STP to be function */ + mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + + /* De-assert USB PHY RESETB */ + gpio_set_value(MX51EVK_USB_PHY_RESET, 1); + + /* Drive USB_CLK_EN_B line low */ + gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0); + + /* Reset USB hub */ + gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0); + mdelay(2); + gpio_set_value(MX51EVK_USBH1_HUB_RST, 1); +} +#endif + static void power_init(void) { unsigned int val; @@ -394,6 +453,9 @@ int board_early_init_f(void) { setup_iomux_uart(); setup_iomux_fec(); +#ifdef CONFIG_USB_EHCI_MX5 + setup_usb_h1(); +#endif return 0; } diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index dd53f48b9a..3b18a18d3e 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -110,6 +110,19 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_NET +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX5 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI +#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 -- 2.25.1