From 050c24f05c85268431515fb118a0710941473f2c Mon Sep 17 00:00:00 2001 From: Li Zhang Date: Fri, 17 Apr 2020 14:39:32 +0800 Subject: [PATCH] mvebu: add support for GL.iNet GL-MV1000 This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB (W25Q128FWSIG) - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC (KLM8G1GETF-B041) - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC) - Button: 1x reset button,1x slide switch - LED: 3x greed LED - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) Update firmware instructions ============================ In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web. Signed-off-by: Li Zhang [Copied dts file to files-5.4] Signed-off-by: Hauke Mehrtens --- package/boot/uboot-envtools/files/mvebu | 3 + .../base-files/etc/board.d/02_network | 3 +- .../boot/dts/marvell/armada-gl-mv1000.dts | 165 ++++++++++++++++++ .../boot/dts/marvell/armada-gl-mv1000.dts | 165 ++++++++++++++++++ target/linux/mvebu/image/cortexa53.mk | 9 + 5 files changed, 344 insertions(+), 1 deletion(-) create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts create mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu index 7902384a37..b883f0aa8c 100644 --- a/package/boot/uboot-envtools/files/mvebu +++ b/package/boot/uboot-envtools/files/mvebu @@ -24,6 +24,9 @@ globalscale,espressobin-v7-emmc|\ marvell,armada8040-mcbin) ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1" ;; +glinet,gl-mv1000) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1" + ;; linksys,caiman|\ linksys,cobra|\ linksys,shelby) diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network index ba4b930426..9b1d97d921 100755 --- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network @@ -14,7 +14,8 @@ case "$board" in globalscale,espressobin|\ globalscale,espressobin-emmc|\ globalscale,espressobin-v7|\ -globalscale,espressobin-v7-emmc) +globalscale,espressobin-v7-emmc|\ +glinet,gl-mv1000) ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" ;; marvell,armada-3720-db|\ diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts new file mode 100644 index 0000000000..9d7963c5b7 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for GL.iNet GL-MV1000 + */ + +/dts-v1/; +#include +#include "armada-372x.dtsi" + +/ { + model = "GL.inet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0Xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + mtd-mac-address = <&factory 0x0>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts new file mode 100644 index 0000000000..9d7963c5b7 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for GL.iNet GL-MV1000 + */ + +/dts-v1/; +#include +#include "armada-372x.dtsi" + +/ { + model = "GL.inet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0Xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + mtd-mac-address = <&factory 0x0>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/target/linux/mvebu/image/cortexa53.mk b/target/linux/mvebu/image/cortexa53.mk index 77f5c79972..1436c1bd23 100644 --- a/target/linux/mvebu/image/cortexa53.mk +++ b/target/linux/mvebu/image/cortexa53.mk @@ -69,3 +69,12 @@ define Device/methode_udpu BOOT_SCRIPT := udpu endef TARGET_DEVICES += methode_udpu + +define Device/glinet_gl-mv1000 + $(call Device/Default-arm64) + DEVICE_TITLE := GL.iNet GL-MV1000 + DEVICE_DTS := armada-gl-mv1000 + SUPPORTED_DEVICES := glinet,gl-mv1000 +endef +TARGET_DEVICES += glinet_gl-mv1000 + -- 2.25.1