From 0104eed1e5ca93a1c912e2d9b70e800b8d3099ad Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 20 Jul 2019 12:49:20 +0200 Subject: [PATCH] ath79: add support for TP-Link CPE510 v1 TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with two Ethernet ports based on Atheros AR9334 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 2T2R 5 GHz - 13 dBi built-in antenna - Power, LAN0, LAN1 green LEDs - 4x green RSSI LEDs Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Based on the work of Paul Wassi Signed-off-by: Adrian Schmutzler --- target/linux/ath79/base-files/etc/board.d/01_leds | 3 ++- target/linux/ath79/base-files/etc/board.d/02_network | 1 + .../ath79/base-files/etc/board.d/03_gpio_switches | 3 ++- target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts | 9 +++++++++ target/linux/ath79/image/generic-tp-link.mk | 12 ++++++++++++ 5 files changed, 26 insertions(+), 2 deletions(-) create mode 100644 target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 5c15984622..85d54aa708 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -158,7 +158,8 @@ tplink,archer-d50-v1) ucidef_set_led_switch "wan_data" "WAN Data" "tp-link:white:internet" "switch0" "0x02" "" "tx rx" ucidef_set_led_switch "wan_link" "WAN Link" "tp-link:white:wan" "switch0" "0x02" "" "link" ;; -tplink,cpe210-v1) +tplink,cpe210-v1|\ +tplink,cpe510-v1) ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 18dfe303ad..e8846f38f3 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -103,6 +103,7 @@ ath79_setup_interfaces() comfast,cf-e110n-v2|\ comfast,cf-e120a-v3|\ tplink,cpe210-v1|\ + tplink,cpe510-v1|\ ubnt,nanostation-m|\ ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches index 3f79ceefaf..9dc9feb70c 100755 --- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches @@ -42,7 +42,8 @@ tplink,archer-c25-v1) ucidef_add_gpio_switch "led_control" "LED control" "21" "0" ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" ;; -tplink,cpe210-v1) +tplink,cpe210-v1|\ +tplink,cpe510-v1) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" ;; ubnt,nanostation-ac) diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts new file mode 100644 index 0000000000..225d16e2e7 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpexxx-v1.dtsi" + +/ { + compatible = "tplink,cpe510-v1", "qca,ar9344"; + model = "TP-Link CPE510 v1"; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index a5844227e4..ffbdfbc14f 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -195,6 +195,18 @@ define Device/tplink_cpe210-v3 endef TARGET_DEVICES += tplink_cpe210-v3 +define Device/tplink_cpe510-v1 + $(Device/tplink-loader-okli) + ATH_SOC := ar9344 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE510 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := rssileds + TPLINK_BOARD_ID := CPE510 + SUPPORTED_DEVICES += cpe510 +endef +TARGET_DEVICES += tplink_cpe510-v1 + define Device/tplink_cpe510-v2 $(Device/tplink-loader-okli) ATH_SOC := ar9344 -- 2.25.1