Antony Pavlov [Sat, 26 Sep 2015 19:59:28 +0000 (22:59 +0300)]
README*: add Black Swift board info
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Dmitriy Zherebkov [Sat, 26 Sep 2015 19:51:04 +0000 (22:51 +0300)]
add Black Swift board support
Black Swift is a tiny coin-sized embedded computer based on AR9331 SoC.
See http://www.black-swift.com/ for details.
See also Black Swift kickstarter page:
https://www.kickstarter.com/projects/
1133560316/black-swift-tiny-wireless-computer
Signed-off-by: Dmitriy Zherebkov <dzh@black-swift.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Piotr Dymacz [Wed, 29 Apr 2015 17:49:28 +0000 (19:49 +0200)]
Enable loadb/loady commands by default for most of supported devices
Piotr Dymacz [Wed, 29 Apr 2015 17:48:08 +0000 (19:48 +0200)]
Cosmetic changes in cmd_load.c, tested, working
Piotr Dymacz [Wed, 29 Apr 2015 14:02:00 +0000 (16:02 +0200)]
Add missing newline in setclk command description.
Piotr Dymacz [Wed, 29 Apr 2015 14:00:32 +0000 (16:00 +0200)]
Restore support for loadb, loads and saves commands. Still needs some tests and fixes.
Piotr Dymacz [Tue, 28 Apr 2015 22:12:32 +0000 (00:12 +0200)]
Add all supported baud rates in top config. TODO: fix AR934x support (need new serial driver)
Piotr Dymacz [Tue, 28 Apr 2015 22:08:12 +0000 (00:08 +0200)]
Print all available baud rates if selected is not supported
Piotr Dymacz [Tue, 28 Apr 2015 21:39:34 +0000 (23:39 +0200)]
Update list of supported baud rates in new AR933x serial driver.
Piotr Dymacz [Tue, 28 Apr 2015 18:18:14 +0000 (20:18 +0200)]
Switch to target function name for clocks reading
Piotr Dymacz [Tue, 28 Apr 2015 17:50:00 +0000 (19:50 +0200)]
Move serial_init function, that solves problems with support for configurable baudrates in compressed version
Piotr Dymacz [Tue, 28 Apr 2015 14:59:57 +0000 (16:59 +0200)]
Don't enable RTS/CTS by default in new AR933x UART driver, because we are not able to control GPIO17 (LED6) after that... it looks like another mistake in datasheet.
Piotr Dymacz [Tue, 28 Apr 2015 13:10:57 +0000 (15:10 +0200)]
Remove unused, old UART driver and clean Makefile in cpu/mips/ar7240
Piotr Dymacz [Tue, 28 Apr 2015 13:08:51 +0000 (15:08 +0200)]
Function ar933x_40MHz_xtal should be inline
Piotr Dymacz [Sun, 19 Oct 2014 20:19:44 +0000 (22:19 +0200)]
Switch to new UART driver and allow to use more baudrates on Dragino2 board for test purposes. This changes break code on boards with compressed, 64 KB U-Boot image.
Piotr Dymacz [Sun, 19 Oct 2014 20:15:00 +0000 (22:15 +0200)]
New and better AR933x UART driver, with support for baudrate switch, used it upstrem U-Boot version, not yet released for this SoC
Piotr Dymacz [Sun, 19 Oct 2014 20:11:07 +0000 (22:11 +0200)]
Move ar7240_sys_frequency function to external, new file: ar933x_clocks.c
Piotr Dymacz [Sun, 19 Oct 2014 20:09:08 +0000 (22:09 +0200)]
New AR933x SoC registers definitions
Piotr Dymacz [Tue, 28 Apr 2015 12:42:08 +0000 (14:42 +0200)]
Make U-Boot image upgrade scripts in environment variables compatible with bigger images
Piotr Dymacz [Tue, 28 Apr 2015 12:28:40 +0000 (14:28 +0200)]
Remove fake, software FLASH protection command and related function... we really don't need it and all it does is just increase final image size
Piotr Dymacz [Tue, 28 Apr 2015 10:46:45 +0000 (12:46 +0200)]
Add missing echo commands in update scripts, stored in environment variables
Piotr Dymacz [Tue, 28 Apr 2015 10:25:28 +0000 (12:25 +0200)]
Make custom command "defenv" compatible with environment variables block stored not at FLASH sector boundary.
Piotr Dymacz [Tue, 28 Apr 2015 10:24:38 +0000 (12:24 +0200)]
Restore FLASH protection related command and function, they are needed for writable environment variables support
Piotr Dymacz [Tue, 28 Apr 2015 09:51:01 +0000 (11:51 +0200)]
Enable more commands and writable environment support on almost all supported devices, excluding D-Link DIR-505.
On rest devices, we will store environment variables in second FLASH sector, at offset 0x9F01EC00 and limit environment block size to 4 KB (should be enough, can be extended with reduced U-Boot image size).
Simple map of new FLASH organization for TP-Link/GS-Oolite/GL.iNet devices:
0x9F000000 Start of FLASH, start of U-Boot image, 1st 64 KB FLASH sector
..........
0x9F010000 Start of 2nd 64 KB FLASH sector
..........
0x9F01EC00 End of U-Boot image (up to 123 KB), start of 4 KB environment variables block
..........
0x9F01FC00 End of environment variables block, start of 1 KB block with MAC address, model number, WPS pin
..........
0x9F020000 End of MAC block, start of 3rd 64 KB FLASH sector, start of firmware image
..........
D-Link DIR-505 has ART data in second sector, starting from 0x9F011000, which gives us only 4 KB of additional space.
Maybe we can fit environment variables block in the same sector where is stored MAC address, but first we need to find more space for U-Boot image.
Piotr Dymacz [Tue, 28 Apr 2015 07:08:21 +0000 (09:08 +0200)]
Fix line endings (Win->Unix) in u-boot/include/configs/db12x.h
Piotr Dymacz [Tue, 28 Apr 2015 06:24:16 +0000 (08:24 +0200)]
Temporary remove DHCP feature on D-Link DIR505, so that the final image is smaller than 64 KB.
Piotr Dymacz [Mon, 27 Apr 2015 22:22:43 +0000 (00:22 +0200)]
Extend maximum U-Boot image size up to 123 KB (1 KB is reserved for additional data in second sector, in rest 4 KB we will store writable environment) for TP-Link, GS-Oolite and GL.iNet devices, that will allow to include more commands, including environment support.
Piotr Dymacz [Mon, 27 Apr 2015 17:38:23 +0000 (19:38 +0200)]
Allow to upload in web failsafe mode U-Boot images which are not multiple of FLASH erase sector size (like Nx64KB). Backup data from FLASH before U-Boot upgrade - that will allow to extend U-Boot image size on all TP-Link devices.
Piotr Dymacz [Tue, 14 Oct 2014 21:58:10 +0000 (23:58 +0200)]
Use U-Boot max. image size definition from top Makefile in configs
Piotr Dymacz [Tue, 14 Oct 2014 21:56:48 +0000 (23:56 +0200)]
Change name of U-Boot max. image size definition in top Makefile
Piotr Dymacz [Mon, 27 Apr 2015 11:12:18 +0000 (13:12 +0200)]
Add more files in top .gitignore
Piotr Dymacz [Sun, 26 Apr 2015 17:18:48 +0000 (19:18 +0200)]
Merge branch 'pull-request-56'
Antony Pavlov [Mon, 20 Apr 2015 13:00:11 +0000 (16:00 +0300)]
import slightly stripped top .gitignore from mainline U-Boot
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Antony Pavlov [Mon, 20 Apr 2015 12:25:20 +0000 (15:25 +0300)]
treewide: drop executable file attrib for non-executable files
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Piotr Dymacz [Fri, 21 Nov 2014 00:49:55 +0000 (01:49 +0100)]
u-boot-update: fix small typo
Piotr Dymacz [Fri, 21 Nov 2014 00:23:28 +0000 (01:23 +0100)]
Add u-boot-update script, used in last release, in dedicated OpenWrt BB images
Piotr Dymacz [Wed, 19 Nov 2014 08:35:23 +0000 (09:35 +0100)]
Suffix for RAM and silent console images versions, indentation fix
Piotr Dymacz [Wed, 19 Nov 2014 08:34:10 +0000 (09:34 +0100)]
Remove SNTP from ap121, that will allow to build images with silent console
Piotr Dymacz [Mon, 8 Sep 2014 01:43:18 +0000 (03:43 +0200)]
Merge pull request #36 from villagetelco/master
Added html files for Village Telco
Piotr Dymacz [Mon, 8 Sep 2014 01:35:58 +0000 (03:35 +0200)]
Merge branch 'master' of github.com:pepe2k/u-boot_mod
Piotr Dymacz [Mon, 8 Sep 2014 01:34:28 +0000 (03:34 +0200)]
Support for Village Telco Mesh Potato 2 (which is based on Dragino 2 hardware)
Piotr Dymacz [Mon, 8 Sep 2014 01:08:21 +0000 (03:08 +0200)]
Information about Village Telco MP2 in README
Piotr Dymacz [Mon, 8 Sep 2014 00:30:49 +0000 (02:30 +0200)]
Support for GL-CONNECT GL.iNet router
Piotr Dymacz [Sun, 7 Sep 2014 23:41:02 +0000 (01:41 +0200)]
Information about GL.iNet in README
Piotr Dymacz [Sun, 7 Sep 2014 23:17:14 +0000 (01:17 +0200)]
Fix line endings in db12x.c
Piotr Dymacz [Sun, 7 Sep 2014 22:53:59 +0000 (00:53 +0200)]
Initial support for RAM version of this U-Boot modification (tested, working).
Usage: uncomment 13 line in top Makefile, build image for selected model, load image to address 0x80100000 and execute it from there.
DO NOT use RAM version images for booting from FLASH - that will brick your device! RAM version DOES NOT contain low level initialization (clocks, PLL, etc.).
Piotr Dymacz [Sat, 6 Sep 2014 00:35:30 +0000 (02:35 +0200)]
Small, cosmetic changes in header print output in mkimage
Piotr Dymacz [Sat, 6 Sep 2014 00:35:05 +0000 (02:35 +0200)]
Small, cosmetic changes in Makefiles
Piotr Dymacz [Fri, 5 Sep 2014 23:05:59 +0000 (01:05 +0200)]
Merge branch 'ar9341_mem_init_fix'
Piotr Dymacz [Fri, 5 Sep 2014 13:25:05 +0000 (15:25 +0200)]
This should solve problems with some DDR1 memories on AR934x
Steve Song [Thu, 14 Aug 2014 11:21:30 +0000 (08:21 -0300)]
Added html files for Village Telco
Piotr Dymacz [Tue, 15 Jul 2014 18:01:23 +0000 (20:01 +0200)]
Merge pull request #32 from hackruu/patch-1
Update README.md
Piotr Dymacz [Tue, 15 Jul 2014 17:59:49 +0000 (19:59 +0200)]
Merge pull request #34 from ljani/patch-1
Add instructions for flashing with OpenWRT
Jani [Tue, 15 Jul 2014 17:56:34 +0000 (20:56 +0300)]
Add instructions for flashing with OpenWRT
These instructions assume a TP-Link product, but try warn about using other devices
hackruu [Wed, 2 Jul 2014 20:52:21 +0000 (00:52 +0400)]
Update README.md
Short notes about using net console on other OSes.
Piotr Dymacz [Tue, 3 Jun 2014 22:45:06 +0000 (00:45 +0200)]
Use BIT13 from BOOT_STRAP register for memory recognition
Piotr Dymacz [Thu, 20 Mar 2014 20:37:23 +0000 (21:37 +0100)]
Simple websites, without logo and repository link, only for fw update
Piotr Dymacz [Thu, 20 Mar 2014 16:45:55 +0000 (17:45 +0100)]
Different IP addresses for Dragino 2
Piotr Dymacz [Thu, 20 Mar 2014 15:02:08 +0000 (16:02 +0100)]
Don't need that...
Piotr Dymacz [Thu, 20 Mar 2014 14:59:06 +0000 (15:59 +0100)]
defenv cmd shouldn't be repeatable
Piotr Dymacz [Thu, 20 Mar 2014 14:58:15 +0000 (15:58 +0100)]
flash -> FLASH
Piotr Dymacz [Thu, 20 Mar 2014 14:48:52 +0000 (15:48 +0100)]
Make defenv cmd compatible with env size smaller than env sector size
Piotr Dymacz [Thu, 20 Mar 2014 13:40:25 +0000 (14:40 +0100)]
Too many space characters in cmd list
Piotr Dymacz [Thu, 20 Mar 2014 13:35:42 +0000 (14:35 +0100)]
Simpler command name for resetting env variables
Piotr Dymacz [Thu, 20 Mar 2014 11:47:29 +0000 (12:47 +0100)]
Simpler command names for O/C
Piotr Dymacz [Thu, 20 Mar 2014 11:37:53 +0000 (12:37 +0100)]
Make Carambola 2 use only half of the FLASH sector for storing env variables, so the clocks/PLL configuration can be safety stored at the end of the same sector
Piotr Dymacz [Thu, 20 Mar 2014 10:31:03 +0000 (11:31 +0100)]
Merge branch 'hush_shell_restore'
Piotr Dymacz [Thu, 20 Mar 2014 10:30:45 +0000 (11:30 +0100)]
Small fixes
Piotr Dymacz [Wed, 19 Mar 2014 23:24:26 +0000 (00:24 +0100)]
Scripts in env variables for simple U-Boot and firmware upgrade
Piotr Dymacz [Wed, 19 Mar 2014 19:33:30 +0000 (20:33 +0100)]
Make itest command enabled by default
Piotr Dymacz [Wed, 19 Mar 2014 19:20:46 +0000 (20:20 +0100)]
Restore itest command
Piotr Dymacz [Wed, 19 Mar 2014 19:12:26 +0000 (20:12 +0100)]
Remove unnecessary code...
Piotr Dymacz [Wed, 19 Mar 2014 17:22:22 +0000 (18:22 +0100)]
Make Hush shell the default command interpreter
Piotr Dymacz [Wed, 19 Mar 2014 14:51:22 +0000 (15:51 +0100)]
Merge branch 'wr720nv3ch_memory_init_fix'
Piotr Dymacz [Wed, 19 Mar 2014 13:39:51 +0000 (14:39 +0100)]
Restore boot/bootd and echo commands
zwhfly [Wed, 19 Mar 2014 11:27:30 +0000 (19:27 +0800)]
Fix serial baud rate calculation
This commit fixes this issue: https://github.com/pepe2k/u-boot_mod/issues/21.
Piotr Dymacz [Wed, 19 Mar 2014 10:54:18 +0000 (11:54 +0100)]
Fix memory init for WR720N v3 CH
Piotr Dymacz [Wed, 19 Mar 2014 10:01:45 +0000 (11:01 +0100)]
Add missing Hush shell code in other files
Piotr Dymacz [Tue, 18 Mar 2014 18:16:04 +0000 (19:16 +0100)]
hush.o in Makefile
Piotr Dymacz [Tue, 18 Mar 2014 18:11:26 +0000 (19:11 +0100)]
Restore Hush shell files from original sources
Piotr Dymacz [Sat, 22 Feb 2014 19:21:12 +0000 (20:21 +0100)]
Fix RAM test (end address was wrong, now it depends on actual RAM size)
Piotr Dymacz [Mon, 10 Feb 2014 21:19:55 +0000 (22:19 +0100)]
Allow to build images with disabled U-Boot console output
Piotr Dymacz [Sun, 9 Feb 2014 23:25:42 +0000 (00:25 +0100)]
Dont show boot delay info if boot delay is 0s
Piotr Dymacz [Sun, 9 Feb 2014 21:02:37 +0000 (22:02 +0100)]
SST 25VF064C chip is not supported - it needs some additional operations before erase/program actions (need access to this chip to make it working)
Piotr Dymacz [Sun, 9 Feb 2014 14:29:26 +0000 (15:29 +0100)]
Small changes in Makefile
Piotr Dymacz [Mon, 3 Feb 2014 22:53:47 +0000 (23:53 +0100)]
Merge branch 'support_for_dragino2'
Piotr Dymacz [Mon, 3 Feb 2014 22:41:36 +0000 (23:41 +0100)]
Info about Dragino 2 in README
Piotr Dymacz [Mon, 3 Feb 2014 22:24:46 +0000 (23:24 +0100)]
Disable U-Boot and ART upgrade for Dragino 2
Piotr Dymacz [Mon, 3 Feb 2014 22:24:06 +0000 (23:24 +0100)]
New defines which allow to disable U-Boot and/or ART upgrade in web failsafe mode
Piotr Dymacz [Mon, 3 Feb 2014 21:04:02 +0000 (22:04 +0100)]
Restore WAN/LAN activity/link LEDs before kernel loading
Piotr Dymacz [Mon, 3 Feb 2014 20:48:44 +0000 (21:48 +0100)]
Small fixes
Piotr Dymacz [Mon, 3 Feb 2014 18:09:57 +0000 (19:09 +0100)]
PLL/clocks configuration offset in FLASH
Piotr Dymacz [Mon, 3 Feb 2014 17:45:51 +0000 (18:45 +0100)]
Use only half of the FLASH sector for Dragino 2 environment
Piotr Dymacz [Mon, 3 Feb 2014 16:25:56 +0000 (17:25 +0100)]
Dedicated web pages for Dragino 2
Piotr Dymacz [Mon, 3 Feb 2014 15:38:46 +0000 (16:38 +0100)]
fsdata.c need to be removed during clean
Piotr Dymacz [Mon, 3 Feb 2014 00:43:06 +0000 (01:43 +0100)]
We won't need old DDR_TAP_CAL anymore
Piotr Dymacz [Mon, 3 Feb 2014 00:37:03 +0000 (01:37 +0100)]
Use the same memory initialization for compressed and uncompressed version, some unused code removed
Piotr Dymacz [Sun, 2 Feb 2014 19:58:18 +0000 (20:58 +0100)]
Small fixes
Piotr Dymacz [Sun, 2 Feb 2014 18:51:57 +0000 (19:51 +0100)]
Initial support for Dragino2, not working - need to rebuild memory initialization
Piotr Dymacz [Sun, 2 Feb 2014 12:48:50 +0000 (13:48 +0100)]
Small changes in flashing.html