Rosen Penev [Sat, 14 Dec 2019 05:25:03 +0000 (21:25 -0800)]
iperf: Fix compilation with libcxx
Avoids redefining bool.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
John Sommerville [Fri, 27 Sep 2019 20:09:10 +0000 (14:09 -0600)]
build: build proper VMDK formats for ESXI 6.5
VMWare ESXI 6.5 and above is not compatible with
subformat=monolithicSparse (The default qemu-img convert -O VMDK option).
Monolithic Sparse vmdk can be imported, but issues occur when running
sysupgrade with new images and other tasks that modify the file system
(issues like Kernel panics, reboot loops, sometimes crashing the Host ESXI
box).
This change creates an additional VMDK output file for ESXI that sets the
subformat to monlithicFlat, and the adapter_type to the SCSI lsilogic
controller.
This change existed back on:
25e36d379e73d64d6316fae9dc841c5ef28980f1
But it looks like the change was removed when refactoring occurred with:
5f6a2732f892b6229473576d89cc963ae9c97d5d
Signed-off-by: John Sommerville <jsommerville@untangle.com>
Brett Mastbergen [Wed, 2 Oct 2019 14:28:16 +0000 (10:28 -0400)]
tools: qemu: Add patches to support adapter_type and monolithicFlat
Its way more trouble to update this to a newer version of qemu than it
is to backport the two additional features we need.
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
Jiri Kastner [Thu, 28 Nov 2019 15:29:31 +0000 (16:29 +0100)]
scripts/dowload.pl: add archive.apache.org to apache mirror list
apache mirrors holds only latest releases, to download
older releases, one must use archive.apache.org to get
them.
Signed-off-by: Jiri Kastner <cz172638@gmail.com>
Stefan Lippers-Hollmann [Thu, 19 Dec 2019 08:14:54 +0000 (09:14 +0100)]
ath10k-firmware: update Candela Tech firmware images
The release notes since last time for wave-1:
* No changes to wave-1, but I make a version .014 copy anyway to keep
the makefile in sync.
The release notes since last time for wave-2:
* December 16, 2019: Wave-2 has a fix to make setting txpower work
better. Before setting the power was ignored at
least some of the time (it also appeared to work
mostly, so I guess it was being correctly set in
other ways).
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
DENG Qingfang [Sun, 15 Dec 2019 16:43:08 +0000 (00:43 +0800)]
linux-firmware: update to
20191215
Update linux-firmware to
20191215
git log --pretty=oneline --abbrev-commit
20190815..
20191215
eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver
dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware
c523dcd WHENCE: Add raspberry-pi4 SDIO file
99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware
2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4
4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
e10ed21 qcom: update venus firmware files for v5.4
af4c4be cxgb4: Update firmware to revision 1.24.11.0
f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
212e441 qcom: Add SDM845 Compute DSP firmware
ec84cf9 qcom: Add SDM845 Audio DSP firmware
62d0a1a qcom: Add SDM845 modem firmware
e8a0f4c rtl_nic: add firmware rtl8168fp-3
9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0
c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201
6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200
84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560
96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260
7319341 amdgpu: update navi14 vcn firmware
b363d9d amdgpu: update navi10 vcn firmware
f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware
4debf21 i915: Add HuC firmware v7.0.3 for TGL
1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL
4b0a210 i915: Add HuC firmware v9.0.0 for EHL
610fe75 i915: Add GuC firmware v33.0.4 for EHL
11bdc57 rtw88: RTL8723D: add firmware file v48
9e194c7 qed: Add firmware 8.40.33.0
4065643 amdgpu: add new navi14 wks gfx firmware for 19.30
d4f88ea amdgpu: update navi14 firmware for 19.30
ea755b6 amdgpu: update raven firmware for 19.30
340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201
ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308
e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308
b27d123 rtl_nic: add firmware files for RTL8153
180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU
0acd93e bnx2x: Add FW 7.13.15.0.
2b016af linux-firmware: Update AMD cpu microcode
4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200
7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201
fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560
b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260
aa95e90 amdgpu: add initial navi14 firmware form 19.30
c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant.
7d187ac ice: Fix up WHENCE entry and symlink
4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware
7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24
c054c53 nvidia: Add XUSB firmware for Tegra194
9cfefbd Remove duplicate symlinks
2de7abd copy-firmware: Create symlinks from WHENCE file
2116bcd Make symlinks consistent
c0590d8 amdgpu: update vega20 ucode for 19.30
43cc648 amdgpu: update vega12 ucode for 19.30
ffa0ed7 amdgpu: update vega10 ucode for 19.30
83e1b41 amdgpu: update picasso ucode for 19.30
7008617 amdgpu: update raven2 ucode for 19.30
9200baa amdgpu: update raven ucode for 19.30
f25a39c amdgpu: add new raven rlc firmware
9ae61e7 ice: Add package file for Intel E800 series driver
417a9c6 amdgpu: add initial navi10 firmware
702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware
3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware
3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake
60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake
c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake
2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton
38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake
8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake
e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML
e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL
51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL
88ea23e qcom: add firmware files for Adreno a630
6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201
6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d45c950 nvidia: Add XUSB firmware for Tegra186
65c6595 Add symlinks for Tegra VIC firmware binaries
0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1
f667c00 rtl_nic: add firmware rtl8125a-3
fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201
2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory.
7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC
65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet
f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
40e4162 iwlwifi: update FWs to core45-152 release
c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files
aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4
665001a linux-firmware: Update firmware file for Intel Bluetooth AX200
c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201
b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560
fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260
ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[Added missing symbolic links to Makefile]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Jeffery To [Mon, 18 Nov 2019 22:04:59 +0000 (06:04 +0800)]
toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAME
This backports the patch for GCC PR target/89587 (gcc's rs6000
configuration unconditionally sets MULTIARCH_DIRNAME, even when
multiarch is disabled).
This currently affects apm821xx and may cause issues when
cross-compiling packages, e.g. Python 3[1].
This includes patches for GCC 8 (with the changelog diff removed);
this change is already included in GCC 9.2 and 7.5.
[1]: https://github.com/openwrt/packages/issues/10552
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
[Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Yorkie Liu [Tue, 19 Nov 2019 05:41:10 +0000 (13:41 +0800)]
toolchain/gcc: correct the check expr for newer clang
This fixes gcc build error within clang 11.0, it tweaks the version
string from LLVM to clang.
Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com>
Kevin Schmidt [Sat, 23 Nov 2019 21:18:32 +0000 (22:18 +0100)]
lantiq: enable 5ghz wifi on VR200/VR200v
Enable mt76 driver on VR200/VR200v.
Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Aleksander Jan Bajkowski [Wed, 11 Dec 2019 18:11:42 +0000 (19:11 +0100)]
lantiq: fix phys led
led2l and led2h value is incorrectly set by led3l and led3h.
Bug was introduced in commit:
863e79f8d5544a8a884375d7e867f350fddca9b9
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Fixes:
863e79f8d554 ("lantiq: add support for kernel 4.9")
Jo-Philipp Wich [Sun, 22 Dec 2019 22:03:59 +0000 (23:03 +0100)]
uhttpd: reset PKG_RELEASE
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 22 Dec 2019 21:50:00 +0000 (22:50 +0100)]
uhttpd: update to latest Git HEAD
5f9ae57 client: fix invalid data access through invalid content-length values
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Sun, 22 Dec 2019 20:30:02 +0000 (21:30 +0100)]
fstools: update to latest git HEAD
b4e25d5 libblkid-tiny: fix symbol collision with full libblkid
Fixes: FS#2691, FS#2692
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Sungbo Eo [Sun, 22 Dec 2019 15:36:11 +0000 (00:36 +0900)]
ramips: fix MAC address setup for Xiaomi MiWiFi Nano
MAC addresses are stored in factory partition at:
0x0004: WiFi 2.4GHz (label_mac +1)
0x0028: LAN, WAN (label_mac)
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 22 Dec 2019 14:47:24 +0000 (23:47 +0900)]
ramips: further improve support for Xiaomi MiWiFi Nano
This patch does the following:
- prepend vendor name to model
- set status LEDs to follow the behavior in stock FW
- simplify state_default node definition
- use generic name for flash node
Stock FW status indicators:
https://files.xiaomi-mi.com/files/Mi_Router_Wi-Fi_Nano/Mi_router-NANO_EN.pdf
> Yellow: power on / off
> Blue: during normal operation
> Red: in case of problems with the operation of the device
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Magnus Kroken [Fri, 1 Nov 2019 23:30:02 +0000 (00:30 +0100)]
openvpn: update to 2.4.8
Backport two upstream commits that allow building
openvpn-openssl without OpenSSLs deprecated APIs.
Full changelog:
https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24#OpenVPN2.4.8
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Adrian Schmutzler [Fri, 20 Dec 2019 13:08:55 +0000 (14:08 +0100)]
lantiq: move include to parent falcon_lantiq_easy98000.dtsi
This moves the include of lantiq.dtsi from the DTS files to the
parent falcon_lantiq_easy98000.dtsi.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 15 Dec 2019 23:25:01 +0000 (00:25 +0100)]
lantiq: remove ar9_lantiq_easy50810.dts
This file seems to be orphaned, no device setup existing for it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 15 Dec 2019 23:21:33 +0000 (00:21 +0100)]
lantiq: use soc_vendor_device scheme on DTS file
This renames lantiq DTS(I) files to follow soc_vendor_device scheme.
This will make DTS files easier to maintain.
As a side effect, DTS file name can be derived from device node
names now, only having to specify a SOC variable in Makefiles.
While at it, move files to arch/mips/boot/dts/lantiq subfolder.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 15 Dec 2019 21:58:34 +0000 (22:58 +0100)]
lantiq: split device definitions into files
This splits device definitions into several *.mk files to increase
overview.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Martin Blumenstingl [Mon, 8 Jul 2019 13:24:22 +0000 (15:24 +0200)]
lantiq: dts: assign the ASC pins to the serial controller node
Assign the ASC pins to the serial controller node instead of using pin
hogging (where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 13:17:25 +0000 (15:17 +0200)]
lantiq: dts: assign the PCI pins to the PCI controller node
Assign the PCI pins to the PCI controller node instead of using pin
hogging (where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 12:54:13 +0000 (14:54 +0200)]
lantiq: dts: assign the STP pins to the STP GPIO controller node
Assign the STP pins to the STP GPIO controller node instead of using
pin hogging (where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 12:47:37 +0000 (14:47 +0200)]
lantiq: dts: assign the GPHY LED pins to the Ethernet controller node
Assign the GPHY LED pins to the Ethernet controller node instead of
using pin hogging (where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 10:10:12 +0000 (12:10 +0200)]
lantiq: dts: assign the NAND pins to the nand-controller node
Assign the NAND pins to the NAND controller node instead of using pin
hogging (where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
While here, define all NAND pins (CLE, ALE, read/RD, ready busy/RDY and
CE/CS1). This means that the pinctrl subsystem knows that these pins are
in use and cannot be re-assigned as GPIOs for example.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 09:50:23 +0000 (11:50 +0200)]
lantiq: dts: define the SPI pins in {amazonse,ar9,vr9}.dtsi
Define the SPI pins in the corresponding SoCs.dtsi and assign them to
the SPI controller node. All known boards use CS4 and it's likely that
this is hardcoded in bootrom so this doesn't bother with having
per-board SPI pinmux settings.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Mon, 8 Jul 2019 09:40:25 +0000 (11:40 +0200)]
lantiq: dts: assign the MDIO pins to the gsw node
Assign the MDIO pins to the switch node instead of using pin hogging
(where pins are assigned to the pin controller).
This is the preferred way of assigning pins upstream.
This converts amazonse, ar9 and vr9. danube is skipped because the pin
controller doesn't define a pinmux for the MDIO pins (some of the SoC
pads may be hardwired to the MDIO pins instead of being configurable).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Adrian Schmutzler [Thu, 19 Dec 2019 18:03:44 +0000 (19:03 +0100)]
ramips: further DTS improvements for Edimax RG21S
This fixes the state_default node by setting the correct groups and
inheriting &state_default from parent DTSI directly.
The compatible for the wifi nodes is changed to the more generic
mediatek,mt76.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Tue, 17 Dec 2019 12:43:25 +0000 (13:43 +0100)]
ramips: add eth0 MAC address for Edimax RG21S
So far, lan/wan MAC address for Edimax RG21S are only read using
mtd_get_mac_ascii, so eth0.1 and eth0.2 addresses are set, but
eth0 address is random. Since the device's LAN address is the same
as for 2.4 GHz, though, this patch set's the eth0 address based
on the 2.4 GHz one, which can be extracted by mtd-mac-address.
This will also allow to move the label MAC address setup to DT.
The setup of lan_mac and wan_mac are kept in 02_network, so those
locations are still in use, too.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sungbo Eo [Sat, 21 Dec 2019 12:43:24 +0000 (21:43 +0900)]
ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U
RT-AC58U has single USB 3.0 port, and only usb3_port1 is actually used.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sat, 21 Dec 2019 03:43:40 +0000 (12:43 +0900)]
ipq40xx: improve ASUS RT-AC58U support
This patch does the following:
- move WiFi LED setup to DTS
- fix LAN/WAN MAC addresses and add label MAC address
- wan5G -> wlan5G, power -> led_power
- increase flash SPI frequency to 30MHz
MAC addresses are stored in Factory partition at:
0x1006: WiFi 2.4GHz, WAN (label_mac)
0x5006: WiFi 5GHz, LAN (label_mac +4)
By improving flash speed,
`time dd if=/dev/mtdblock8 of=/dev/null bs=2k`
is reduced from 7m 10.26s to 5m 9.52s.
Using higher frequencies did not improve speed further.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 15 Dec 2019 09:10:18 +0000 (18:10 +0900)]
ar71xx: fix MAC address setup for TL-WDR4300 board
The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:
OpenWrt: lan = label_mac -2, wan = label_mac -2
stock: lan = label_mac, wan = label_mac +1
This patch applies to all devices using TL-WDR4300 board:
TL-WDR3600 v1
TL-WDR4300 v1
TL-WDR4300 v1 (IL)
TL-WDR4310 v1
Mercury MW4530R v1
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 15 Dec 2019 09:11:45 +0000 (18:11 +0900)]
ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300
The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:
OpenWrt: lan = label_mac -2, wan = label_mac -2
stock: lan = label_mac, wan = label_mac +1
The full address assignment is as follows:
LAN label
WAN label + 1
5G label
2G label - 1
This patch changes all devices using TL-WDR4300 board:
TL-WDR3600 v1 (checked on device)
TL-WDR4300 v1 (checked on device)
TL-WDR4300 v1 (IL)
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase/extend commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Wed, 23 Oct 2019 20:25:14 +0000 (22:25 +0200)]
ipq40xx: add support for Aruba AP-303
Hardware
--------
SoC: Qualcomm IPQ4029
RAM: 512M DDR3
FLASH: - 128MB NAND (Macronix MX30LF1G18AC)
- 4MB SPI-NOR (Macronix MX25R3235F)
TPM: Atmel AT97SC3203
BLE: Texas Instruments CC2540T
attached to ttyMSM0
ETH: Atheros AR8035
LED: WiFi (amber / green)
System (red / green)
BTN: Reset
To connect to the serial console, you can solder to the labled pads next
to the USB port or use your Aruba supplied UARt adapter.
Do NOT plug a standard USB cable into the Console labled USB-port!
Aruba/HPE simply put UART on the micro-USB pins. You can solder yourself
an adapter cable:
VCC - NC
D+ - TX
D- - RX
GND - GND
The console setting in bootloader and OS is 9600 8N1. Voltage level is
3.3V.
To enable a full list of commands in the U-Boot "help" command, execute
the literal "diag" command.
Installation
------------
1. Get the OpenWrt initramfs image. Rename it to ipq40xx.ari and put it
into the TFTP server root directory. Configure the TFTP server to
be reachable at 192.168.1.75/24. Connect the machine running the TFTP
server to the ethernet port of the access point.
2. Connect to the serial console. Interrupt autobooting by pressing
Enter when prompted.
3. Configure the bootargs and bootcmd for OpenWrt.
$ setenv bootargs_openwrt "setenv bootargs console=ttyMSM1,9600n8"
$ setenv nandboot_openwrt "run bootargs_openwrt; ubi part aos1;
ubi read 0x85000000 kernel; bootm 0x85000000"
$ setenv ramboot_openwrt "run bootargs_openwrt;
setenv ipaddr 192.168.1.105; setenv serverip 192.168.1.75;
netget; set fdt_high 0x87000000; bootm"
$ setenv bootcmd "run nandboot_openwrt"
$ saveenv
4. Load OpenWrt into RAM:
$ run ramboot_openwrt
5. After OpenWrt booted, transfer the OpenWrt sysupgrade image to the
/tmp folder on the device.
6. Flash OpenWrt:
$ ubidetach -p /dev/mtd1
$ ubiformat /dev/mtd1
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
To go back to the stock firmware, simply reset the bootcmd in the
bootloader to the original value:
$ setenv bootcmd "boot"
$ saveenv
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 15 Dec 2019 22:02:54 +0000 (23:02 +0100)]
ipq-wifi: add BDF for Aruba AP-303
The BDF originates from the vendor-firmware.
Signed-off-by: David Bauer <mail@david-bauer.net>
Sungbo Eo [Mon, 11 Nov 2019 16:19:03 +0000 (01:19 +0900)]
ramips: fix USB LED for Belkin F9K1109v1
Device support for Belkin F9K1109v1 was added using set_usb_led()
although this was removed in
772b27c20736 ("ramips: set
F5D8235 v1
usb led trigger via devicetree").
Use ucidef_set_led_usbport() instead.
Fixes:
f2c83532f92c ("ramips: add support for Belkin F9K1109v1")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase commit title and message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Rafał Miłecki [Fri, 20 Dec 2019 07:19:02 +0000 (08:19 +0100)]
fstools: update to latest git HEAD
111a43f libblkid-tiny: vfat: Change parsing label in special cases
f43a1aa libblkid-tiny: vfat: Fix reading labels which starts with byte 0x05
157924d libblkid-tiny: add blkid_probe_set_id_label() stub
0c5761f libblkid-tiny: use separated buffer for each block device read
b82c5c1 libblkid-tiny: add functions for allocating & freeing probe struct
12851d6 blockd: don't flush devices list on "hotplug" call
5ea47fe blockd: fix vlist memory corruption
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Adrian Schmutzler [Fri, 20 Dec 2019 00:18:44 +0000 (01:18 +0100)]
sunxi: rename SUNXI_SOC to SOC
This replaces SUNXI_SOC by the newly introduced common SOC device
variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 20 Dec 2019 00:15:57 +0000 (01:15 +0100)]
ramips: rename MTK_SOC to SOC
This replaces MTK_SOC by the newly introduced common SOC device
variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 20 Dec 2019 00:12:42 +0000 (01:12 +0100)]
ath79: rename ATH_SOC to SOC
This replaces ATH_SOC by the newly introduced common SOC device
variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 16 Dec 2019 12:19:43 +0000 (13:19 +0100)]
build: image: add SOC device variable
This creates the device variable SOC and adds it to DEFAULT_DEVICE_VARS.
It is supposed to replace target-specific SOC variables like ATH_SOC or
MTK_SOC and thus unify variable names across targets.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 19 Dec 2019 19:42:19 +0000 (20:42 +0100)]
ath79: harmonize line breaks in image Makefiles
This harmonizes the line wrapping in image Makefile device
definitions, as those are frequently copy-pasted and are a common
subject of review comments. Having the treatment unifying should
reduce the cases where adjustment is necessary afterwards.
Harmonization is achieved by consistently (read "strictly")
applying certain rules:
- Never put more than 80 characters into one line
- Fill lines up (do not break after 40 chars because of ...)
- Use one tab for indent after wrapping by "\"
- Only break after pipe "|" for IMAGE variables
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 19 Dec 2019 18:40:33 +0000 (19:40 +0100)]
ramips: harmonize line breaks in image Makefiles
This harmonizes the line wrapping in image Makefile device
definitions, as those are frequently copy-pasted and are a common
subject of review comments. Having the treatment unifying should
reduce the cases where adjustment is necessary afterwards.
Harmonization is achieved by consistently (read "strictly")
applying certain rules:
- Never put more than 80 characters into one line
- Fill lines up (do not break after 40 chars because of ...)
- Use one tab for indent after wrapping by "\"
- Only break after pipe "|" for IMAGE variables
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Petr Štetiar [Wed, 11 Dec 2019 20:23:24 +0000 (21:23 +0100)]
uci: update to latest Git HEAD
165b44413145 uci: Fix extra semicolons warnings
66264ed9ec9e cmake: add more hardening compiler flags
cca6f105fae2 libuci: refactor uci_get_errorstr
750b046eb77f tests: cram: Lua: add test case for uci_get_errorstr
654d7c33da28 lua: add missing forward declaration
03dfbbe6fef7 cli: fix format string clang-10 warning
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Karl Palsson [Fri, 13 Dec 2019 14:38:14 +0000 (14:38 +0000)]
uboot-envtools: ath79: fix missing etactica eg200 support
Was inadvertantly missed from the inital forward port from ar71xx to
ath79.
Fixes:
1588114cf2a3 ("ath79: add etactica-eg200 support")
Signed-off-by: Karl Palsson <karlp@etactica.com>
[commit description/subject facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Fertser [Tue, 26 Nov 2019 13:01:11 +0000 (16:01 +0300)]
ath79-tiny: enable 4k sectors
This enables using 4kiB sectors as erase blocks for 4MiB NOR flash ICs
that support it.
Writeable jffs2 overlay used to store settings requires a partition with
at least 5 erase blocks, so using small sectors is essential for devices
with 4MiB flash.
Sysupgrading a device running firmware without this feature will likely
not allow to preserve configs automatically but since ath79 is
considered to be in a "technology preview" state it shouldn't be a
problem.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Paul Fertser [Tue, 10 Dec 2019 10:52:02 +0000 (13:52 +0300)]
ath79: add D-Link DIR-615 E4
Specifications:
- FCC ID: KA2IR615E3
- SoC: MIPS32 24K 400 MHz Atheros AR7240
- RAM: 32 MiB DDR SDRAM ESMT M13S2561616A-5T
- Flash: 4 MiB NOR SPI Macronix MX25L3208E
- Wireless: AR9287 2.4 GHz 802.11n 2T2R, 2x RP-SMA connectors
- Ethernet: 5x 100BASE-TX Fast Ethernet
- LEDs: 9x GPIO, 1x ath9k
- Buttons: 2x tactile switches
- UART: 3.3 V, 115200 8n1
- USB: simple hardware modification required, 1x USB 1.1 Full Speed
Partitioning notes:
Vendor firmware (based on CameoAP99) defines two additional partitions:
"mac" @0x3b0000, size 0x10000 and "lp" @0x3c0000, size 0x30000.
The "mac" partition stores LAN MAC address and hardware board name.
However, the vendor firmware uses addresses from "nvram" partition, and
the board name is used only for informational purposes in the Web
interface (included in the pages' header), not affecting the firmware
image check.
The "lp" partition is supposed to contain a "language pack" (which can
be used to add an additional language support to the Web interface) and
is flashed separately, using the vendor firmware upgrade page.
Since these partitions are absolutely useless for OpenWrt and
overwriting them doesn't prevent downgrading to obsolete vendor
firmware, this patch appends the valueable space to "firmware".
Installation instructions:
- Upgrade from OpenWrt ar71xx with "sysupgrade -f -n"
or
- Upload as a firmware update via the vendor Web-interface
or
- Connect UART and use "loady" to upload and run OpenWrt initramfs
image, then sysupgrade from it (TFTP client doesn't work)
or
- Before powering up hold "reset" button and keep it pressed for about
15 seconds after, then access fail safe Web server on 192.168.0.1 (the
old uIP TCP/IP protocol stack is not compatible with modern Linux, the
kernel, so you'll need to use some other OS to do this). Can be
performed without a Web-browser too:
curl http://192.168.0.1/cgi/index \
-F Send=@openwrt-ath79-tiny-dlink_dir-615-e4-squashfs-factory.bin
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Michal Cieslakiewicz [Tue, 12 Nov 2019 13:02:14 +0000 (14:02 +0100)]
ath79: enable all space on Netgear ar9344-based WNDR routers
Netgear WNDR routers (AR9344 models) like WNDR4300 have 128 MiB of flash
memory but only first 32 MiB are used now - both by vendor's firmware and
OpenWrt. This patch concatenates two regions of flash memory: ubi part
of firmware partition and reserved (unused) space beyond 'caldata_backup'
while preserving ART backup. No data is wiped or moved away.
This increases area for OS ubi volumes from 23 to 119 Megabytes.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Paul Fertser [Tue, 10 Dec 2019 14:24:20 +0000 (17:24 +0300)]
base-files: send informational UDP message each second waiting
The preinit network initialisation and failsafe informational message
are inherently racy as the interface takes some time to become
functional after "ip link set $pi_ifname up" command.
Consider this timing:
[ 12.002713] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.008819] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[ 12.118877] random: procd: uninitialized urandom read (4 bytes read)
[ 13.068614] eth1: link up (1000Mbps/Full duplex)
[ 13.073309] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.080445] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
Since the UDP message was sent prior to link becoming ready, it was
never seen on the wire.
The default failsafe timeout is set to 2 seconds, so with this patch
there are two attempts to send the message, one spent in vain, and the
other visible in tcpdump on an attached host. Of course, in cases when
the interface is brought up faster it leads to two messages, however it
should be harmless. This patch (almost) doesn't affect normal boot time
while still allowing to enter failsafe reliably with a single button
press, matching the official "generic failsafe" documentation.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Petr Štetiar [Fri, 6 Dec 2019 05:55:24 +0000 (06:55 +0100)]
iputils: move iputils tools to packages feed
iputils has moved from the master tree to the packages feed, and is
switching from the abandoned skbuff.net upstream to
github.com/iputils/iputils.
Ref: https://git.openwrt.org/
556698cedf9e86a0ffe9f148d4e8e733676c26f6
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Ansuel Smith [Sun, 15 Dec 2019 13:08:46 +0000 (14:08 +0100)]
ipq806x: switch to 4.19 kernel version
It has been used by several people for some time already and feedback
has been mostly positive.
Ref: https://github.com/openwrt/openwrt/pull/2472
Tested-by: Hannu Nyman <hannu.nyman@iki.fi> [ipq8065, R7800]
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065, NBG6817]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[separate commit, commit subject and description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Ansuel Smith [Sun, 15 Dec 2019 13:07:46 +0000 (14:07 +0100)]
ipq806x: update USB3 modules for 4.19
- Use new dwc3-qcom usb driver.
- Drop dwc3-of-simple as we have a dedicated driver now.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[split into separate commit, commit subject facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Pavel Kubelun [Mon, 2 Dec 2019 23:45:47 +0000 (00:45 +0100)]
ipq806x: add missing core1 voltage tolerance
Voltage tolerance is accounted per core, not per cpu, so add
missing DT entry.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 29 Nov 2019 16:24:14 +0000 (17:24 +0100)]
kernel: make dwc3 usb driver depends on kernel 4.14
- usb-dwc3-of-simple is not used anymore as we have qcom dedicated driver
- usb-phy-qcom-dwc3 is not dependent of dwc3-of-simple
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 28 Nov 2019 21:29:15 +0000 (22:29 +0100)]
ipq806x: fix tsens driver in 4.19
Added patch:
- 063-3 Fix tsense shared memory problem
Recent changes in ioremap_resource function are causing fails for the
memory areas which are already mapped. This changes are causing tsense
driver failures during initialization:
qcom-tsens 900000.thermal-sensor: tsens init failed
So this patch uses simple ioremap in order to use this shared memory
space.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit subject and desciption facelitf]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Christian Lamparter [Wed, 4 Dec 2019 01:57:38 +0000 (02:57 +0100)]
ipq806x: improve mdio gpios list
Improve rediability of gpio mdio list. No functional change.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[proper authorship of the patch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Christian Lamparter [Wed, 4 Dec 2019 01:28:53 +0000 (02:28 +0100)]
ipq806x: ap161: fix wrong definition stdout
From documentation
https://www.kernel.org/doc/Documentation/devicetree/bindings/chosen.txt
should be just stdout-path
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[proper authorship of the patch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Christian Lamparter [Wed, 4 Dec 2019 01:28:22 +0000 (02:28 +0100)]
ipq806x: ap148: reorganize dts
Reorganize dts to use tags from ipq8064 dtsi
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 01:26:30 +0000 (02:26 +0100)]
ipq806x: d7800: fix warning on dtc compilation
There is warning with "property has invalid length (4 bytes)"
related to nand definition. Set size-cells to zero to fix this.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 01:24:44 +0000 (02:24 +0100)]
ipq806x: r7800: add missing wifi definition for pcie
Add missing wifi compatible definition for r7800 device.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 00:26:22 +0000 (01:26 +0100)]
ipq806x: use ipq8064 dedicated watchdog
Add missing watchdog to list of compatible timers
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 00:23:26 +0000 (01:23 +0100)]
ipq806x: add nand and sata tags
Add some tags for nand and sata structure to easily
reference them in other dts.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 00:25:33 +0000 (01:25 +0100)]
ipq806x: increase drive-strength for pinmux
Increase drive-strength from
https://lore.kernel.org/patchwork/patch/626885/
2mA drive strength is not enough when we connect multiple i2c devices
on the bus with different pull up resistors.
This issue was detected when multiple i2c devices
connected on the other side of level shifters on Linaro sensor board.
Maxing up to 16mA made i2c much stable.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 00:24:55 +0000 (01:24 +0100)]
ipq806x: add missing gpio and gsbi declaration
Adds missing gpio and gsbi declaration.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 5 Dec 2019 00:12:55 +0000 (01:12 +0100)]
ipq806x: disable spc on ipq8065 soc
Spc is disabled in ipq8065 board as it does cause cpu lockup
(probably caused by wrong register being set)
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 5 Dec 2019 00:12:32 +0000 (01:12 +0100)]
ipq806x: set apq8064 regulator to support cpuidle
Set qcom,apq8064-saw2-v1.1-cpu as regulator to make cpuidle work.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 00:11:01 +0000 (01:11 +0100)]
ipq806x: convert ipq8064 dtsi interrupts
Convert hardcoded interrupts value to types defined in gci include file.
Interrupts sets to 0 are converted to IRQ_TYPE_LEVEL_HIGH to fix
kernel warning. Same fix has been applied to arm64 dts.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1797143
https://patchwork.kernel.org/patch/
10367453/
https://patchwork.kernel.org/patch/
10315315/
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 5 Dec 2019 01:10:26 +0000 (02:10 +0100)]
ipq806x: use new usb3 implementation
Use new usb3 implementation and refresh dts to the new dwc3 structure
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[proper authorship of the patch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Christian Lamparter [Mon, 16 Dec 2019 19:29:17 +0000 (20:29 +0100)]
ipq806x: fix missing compatible and rename
- ipq8064 compatible was missing from nbg6817.
- Rename ap148 with a better descriptive name.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[proper authorship of the patch]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Christian Lamparter [Wed, 4 Dec 2019 00:20:45 +0000 (01:20 +0100)]
ipq806x: convert ok to okay in dts
DT spec require okay instead of ok in dts files
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Christian Lamparter [Thu, 28 Nov 2019 21:28:48 +0000 (22:28 +0100)]
ipq806x: refresh 4.19 patches
Reworked:
- 0034 patchset update
Added:
- 080 Add support for pinctrl-msm framework
Removed:
- 0074-ipq806x-usb-Control-USB-master-reset.patch
(we now have a dedicated driver for qcom usb)
- 0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke
(merged upstream)
- 310-msm-adhoc-bus-support
(it looks like it was never actually used in any dts)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit subject and description facelift, SoB fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Ansuel Smith [Thu, 28 Nov 2019 20:58:19 +0000 (21:58 +0100)]
kernel: generic: add missing config symbol to 4.19
PCI_V3_SEMI config symbol was found missing in generic kernel config
after ipq806x config refresh to 4.19.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[commit subject and description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Ansuel Smith [Sun, 15 Dec 2019 13:06:02 +0000 (14:06 +0100)]
ipq806x: update 4.19 kernel config
These changes are needed in order to migrate old kernel 4.14 config to
the upcoming kernel version 4.19. Also add missing configuration
options that comes up with this SoC.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[line wrap long commit description, add 4.19 to subject, soc->SoC]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Ansuel Smith [Thu, 28 Nov 2019 20:41:20 +0000 (21:41 +0100)]
ipq806x: copy files from 4.14 to 4.19
This copies files from files-4.14 to files-4.19 directory in order to
get clear diffs for any changes done from now on.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[added missing commit description, refreshed ea8500 and wpq864 DTS]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Lech Perczak [Sun, 8 Dec 2019 14:23:54 +0000 (15:23 +0100)]
ath79: restore gpio-export on TL-WDR3600/4300
This partially reverts commit
32144ba275d163ce6e7d93546ab4414f03f508fb.
This commit replaced gpio-exports in favor of gpio-hogs for enabling USB
power at boot, but this rids the user of control of the USB port power
present on this device for a long time. It was agreed on a mailing list
[1] that this is not the way to go, and this patch breaks a very common
use-case of WWAN modem reset by power cycle, used on a lot USB equipped
routers, hence revert this change until a better solution can be found.
[1] http://lists.infradead.org/pipermail/openwrt-devel/2019-November/020151.html
Tested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[adjusted commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Lech Perczak [Sun, 1 Dec 2019 18:31:32 +0000 (19:31 +0100)]
ath79: add support for TP-Link TL-WR902AC v1
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of
TL-MR3020 (both devices use very similar enclosure, in same size). New
device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (GPIO-controlled power)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch
- UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper
resitors are missing on TX/RX lines)
- 1x micro USB (for power only)
Flash instructions:
Use "factory" image under vendor GUI.
Recovery instructions:
This device contains tftp recovery mode inside U-Boot. You can use it to
flash OpenWrt (use "factory" image) or vendor firmware.
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ath79-generic-tplink_tl-wr902ac-v1-squashfs-factory.bin"
to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir.
3. Connect PC with LAN port, press the reset button, power up the router
and keep button pressed until WPS LED lights up.
4. Router will download file from server, write it to flash and reboot.
MAC Address summary:
- wlan1 (2.4GHz Wi-Fi): Label MAC
- wlan0 (5GHz Wi-Fi): Offset -1 from label
- eth0 (Wired): Offset +1 from label
Root access over serial line in vendor firmware: root/sohoadmin.
Based on support in ar71xx target by: Piotr Dymacz <pepe2k@gmail.com>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[remove size-cells from gpio-export]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Maxim Anisimov [Wed, 18 Dec 2019 07:06:14 +0000 (10:06 +0300)]
ramips: fix portmap for TP-Link Archer C50 v4
According to 02_network portmap is wan=0 lan1=1 lan2=2 lan3=3 lan4=4
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Rafał Miłecki [Thu, 19 Dec 2019 08:16:59 +0000 (09:16 +0100)]
mac80211: brcm: add support for BCM4359 SDIO chipset
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 19 Dec 2019 07:40:12 +0000 (08:40 +0100)]
mac80211: brcm: backport 5.5 and 5.6 kernel patches
This update doesn't include:
3b1e0a7bdfee brcmfmac: add support for SAE authentication offload
be898fed355e brcmfmac: send port authorized event for FT-802.1X
due to nl80211 dependencies.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Álvaro Fernández Rojas [Wed, 4 Sep 2019 15:22:54 +0000 (17:22 +0200)]
brcm2708: switch to cypress-nvram package
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Wed, 4 Sep 2019 15:21:26 +0000 (17:21 +0200)]
cypress-nvram: add new package
This package contains nvram files for brcmfmac, a mac80211 driver for FullMAC
Cypress devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Kevin Darbyshire-Bryant [Tue, 17 Dec 2019 14:10:13 +0000 (14:10 +0000)]
wireguard: bump to 0.0.
20191212
1ec6ece version: bump snapshot
e13de91 main: remove unused include <linux/version.h>
72eb17c wg-quick: linux: support older nft(8)
1d8e978 global: fix up spelling
e02713e wg-quick: linux: add support for nft and prefer it
b4e3a83 compat: support building for RHEL-8.1 instead of RHEL-8.0
f29e3ac socket: convert to ipv6_dst_lookup_flow for 5.5
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Álvaro Fernández Rojas [Wed, 4 Sep 2019 15:32:08 +0000 (17:32 +0200)]
brcmfmac-board-rpi: remove uneeded package
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Wed, 4 Sep 2019 15:22:54 +0000 (17:22 +0200)]
brcm2708: switch to cypress-firmware package
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Wed, 4 Sep 2019 15:20:36 +0000 (17:20 +0200)]
cypress-firmware: add new package
This package contains firmwares provided by Cypress
See https://community.cypress.com/community/linux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Imran Khan [Tue, 17 Dec 2019 13:59:28 +0000 (05:59 -0800)]
uboot-envtools: check for config prior to append
In the rare event a pre-populated fw_env.config exists in the rootfs prior
to firstboot, calling fw_setenv after the system has initialised will
annihilate the devices environment due to two identical lines in
fw_env.config.
Check for existence prior to blind appendage.
Signed-off-by: Imran Khan <gururug@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed patch format, improved grep, cosmetics]
Adrian Schmutzler [Mon, 16 Dec 2019 17:07:03 +0000 (18:07 +0100)]
ramips: allow to set switchdev by board in ramips_set_preinit_iface
This adds the option to determine switchdev by board when setting
preinit iface for failsafe. The patch reorganizes the code to use
functions for setting correct switchdev based on SOC and board,
which is supposed to improve readability and maintainability.
In this patch, the ramips_switchdev_from_board function is added
without specifying an actual device using it. This is meant to
make the life of device supporters waiting for merge easier, as
there is less to rebase and keep track of.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sungbo Eo [Thu, 26 Sep 2019 15:16:33 +0000 (00:16 +0900)]
ramips: add support for ipTIME A104ns
ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100Mbps
- Switch: SoC internal
- USB: 1x 2.0
- UART:
- J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
In contrast to to-be-supported A1004ns, the A104ns has no usable
value in 0x1fc40 (uboot), so wan_mac needs to be calculated.
Also note that GPIOs for the LEDs really are inverted compared to
the A1004ns.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[moved state_default to device DTS, reordered properties in wmac,
added comment about wan_mac and LED GPIOs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sungbo Eo [Sun, 15 Dec 2019 09:16:55 +0000 (18:16 +0900)]
ath79: migrate LED paths of TL-WDR4300 board
TL-WDR4300 board uses only green LED names in DTSI.
This patch adds migration for them.
The actual LED colors on the devices have been reported to vary
across subrevisions (v1.x). Despite, the USB LEDs on the back might
have different color than the other LEDs on the front.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 16 Dec 2019 13:01:41 +0000 (14:01 +0100)]
ramips: add label MAC address for Edimax RG21S
The Edimax RG21S has a label which bears two MAC addresses:
2.4 GHz (n) and 5 GHz (n+1)
The complete MAC address setup is as follows:
2.4 GHz *:83 factory 0x4, u-boot-env wlanaddr
5 GHz *:84 factory 0x8004
LAN *:83 u-boot-env ethaddr
WAN *:85 u-boot-env wanaddr
Since 2.4 GHz is the first address on the label and the same
as used for ethernet, take this one for label MAC address.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Birger Koblitz [Mon, 16 Dec 2019 12:57:44 +0000 (13:57 +0100)]
ramips: increase SPI frequency for Edimax RG21S
This increases SPI frequency from the relatively low 10 MHz to 40 MHz.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
[added commit title/message, split patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Birger Koblitz [Mon, 16 Dec 2019 12:55:03 +0000 (13:55 +0100)]
ramips: remove unnecessary nodes in DTS for Edimax RG21S
This sdhci and i2c nodes were copy-pasted, but are not needed as
the device does not provide that functionality. Remove them.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
[added commit title/message, split patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Jo-Philipp Wich [Tue, 17 Dec 2019 07:33:33 +0000 (08:33 +0100)]
rpcd: update to latest Git HEAD
aaa0836 file: extend exec acl checks to commands with arguments
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
David Bauer [Sat, 14 Dec 2019 18:15:21 +0000 (19:15 +0100)]
ar71xx: indicate upgrade using system LED
This enables the system LED to indicate a running firmware upgrade. This
pattern is used on most platforms provided by the generic base-files
package. ar71xx uses it's own implementation for the system-LED, where
the upgrade case is not yet implemented.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 14 Dec 2019 22:38:02 +0000 (23:38 +0100)]
mac80211: fix txpower when using DFS channels
With this patch, txpower for the PHY is applied when configuring the PHY
instead of the VIF. Otherwise, the configured txpower is not applied for
the first initialized VIF when using DFS channels, as it is currently
applied too early when the CAC hasn't finished.
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Hans Dedecker [Sun, 15 Dec 2019 19:52:31 +0000 (20:52 +0100)]
odhcpd: update to latest git HEAD
d60f0a6 treewide: optimize syslog priority values
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
David Bauer [Fri, 13 Dec 2019 20:31:50 +0000 (21:31 +0100)]
mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------
SoC: NXP P1020 (2x e500 @ 800MHz)
RAM: 256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 1x Gigabit Ethernet (Atheros AR8033)
LED: System (green/red) - Radio{0,1} (green)
LAN (connected to PHY)
- GE blue
- FE green
Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.
Installation
------------
1. Grab the OpenWrt initramfs, rename it to
01C8A8C0.img. Place it in
the root directory of a TFTP server and serve it at
192.168.200.200/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Set the bootcmd so the AP can boot OpenWrt by executing
$ setenv boot_openwrt "setenv bootargs;
cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
If you plan on going back to the vendor firmware - the bootcmd for it
is stored in the boot_flash variable.
4. Load the initramfs image to RAM and boot by executing
$ tftpboot 0x1000000 192.168.200.200:
01C8A8C0.img; bootm
5. Make a backup of the "firmware" partition if you ever wish to go back
to the vendor firmware.
6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
folder.
7. Flash OpenWrt using sysupgrade.
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
DENG Qingfang [Fri, 13 Dec 2019 16:24:19 +0000 (00:24 +0800)]
ramips: add support for JCG JHR-AC876M
JCG JHR-AC876M is an AC2600M router
Hardware specs:
SoC: MT7621AT
2.4GHz: MT7615N 4x4 @ PCIe0
5GHz: MT7615N 4x4 @ PCIe1
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
USB 2.0 and 3.0 ports
6 LEDs, 3 of which are connected to SoC GPIO
Reset and WPS buttons
Flash instructions:
Stock to OpenWrt:
Upload factory.bin in stock firmware's upgrade page,
do not preserve settings
OpenWrt to stock:
Push and hold the reset button for 5s while power cycling to
enter recovery mode;
Visit 192.168.1.1 and upload stock firmware
MAC addresses map:
0x0004 *:1c wlan2g/wan/label
0x8004 *:20 wlan5g
0xe000 *:1b lan
0xe006 *:1a not used in stock fw
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Adrian Schmutzler [Thu, 12 Dec 2019 19:26:06 +0000 (20:26 +0100)]
ramips: allow JCG_MAXSIZE in kiB in Build/jcg-header
This allows JCG_MAXSIZE to be specified in kilobytes. This makes
this value more consistent and easier comparable with other size
variables.
This also changes the only occurence of the variable, for Cudy WR1000.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sungbo Eo [Mon, 11 Nov 2019 16:25:31 +0000 (01:25 +0900)]
ramips: add support for ipTIME A6ns-M
ipTIME A6ns-M is a 2.4/5GHz band AC1900 router, based on MediaTek MT7621A.
Specifications:
- SoC: MT7621AT
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 5x 10/100/1000Mbps
- Switch: SoC internal
- UART:
- J4: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
projects / oweals / openwrt.git / log