Assert that SSLfatal() only gets called once

We shouldn't call SSLfatal() multiple times for the same error condition.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Add some sanity checks for the fatal error condition

Sometimes at the top level of the state machine code we know we are
supposed to be in a fatal error condition. This commit adds some sanity
checks to ensure that SSLfatal() has been called.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Fix up a few places in the state machine that got missed with SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Convert more functions in ssl/statem/statem_dtls.c to use SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Convert more functions in ssl/statem/statem.c to use SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Convert remaining functions in statem_srvr.c to use SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Convert remaining functions in statem_clnt.c to use SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Convert the state machine code to use SSLfatal()

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Replace some usage of SSLerr with SSLfatal()

This is an initial step towards using SSLfatal() everywhere. Initially in
this commit and in subsequent commits we focus on the state machine code.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Provide an SSLfatal() macro

Typically if a fatal error occurs three things need to happen:

- Put an error on the error queue
- Send an alert
- Put the state machine into the error state

Although all 3 of these things need to be done every time we hit a fatal
error the responsibilities for doing this are distributed throughout the
code. The place where the error goes on the queue, where the alert gets
sent and where the state machine goes into the error state are almost
invariably different. It has been a common pattern to pass alert codes up
and down the stack to get the alert information from the point in the code
where the error is detected to the point in the code where the alert gets
sent.

This commit provides an SSLfatal() macro (backed by an ossl_statem_fatal
function) that does all 3 of the above error tasks. This is largely a drop
in replacement for SSLerr, but takes a couple of extra parameters (the SSL
object, and an alert code).

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)

Adjusted Argument Indices
CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4835)

Make possible variant SONAMEs and symbol versions

This small change in the Unix template and shared library build
scripts enables building "variant" shared libraries.  A "variant"
shared library has a non-default SONAME, and non default symbol
versions.  This makes it possible to build (say) an OpenSSL 1.1.0
library that can coexist without conflict in the same process address
space as the system's default OpenSSL library which may be OpenSSL
1.0.2.

Such "variant" shared libraries make it possible to link applications
against a custom OpenSSL library installed in /opt/openssl/1.1 or
similar location, and not risk conflict with an indirectly loaded
OpenSSL runtime that is required by some other dependency.

Variant shared libraries have been fully tested under Linux, and
build successfully on MacOS/X producing variant DYLD names.  MacOS/X
Darwin has no symbol versioning, but has a non-flat library namespace.
Variant libraries may therefore support multiple OpenSSL libraries
in the same address space also with MacOS/X, despite lack of symbol
versions, but this has not been verified.

Variant shared libraries are optional and off by default.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add "friendly name" extractor

From a comment posted by GitHub user "geniuz"

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4812)

Add sk_new_reserve support

This is a specific 1.1.1 change; do not squash if the chacha
prioritization code is to be backported

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)

Use ChaCha only if prioritized by clnt

IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)

A missing semicolon prevents compilation with ENGINE_REF_COUNT_DEBUG enabled.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4816)

Fix chacha-armv4.pl with clang -fno-integrated-as.

The __clang__-guarded #defines cause gas to complain if clang is passed
-fno-integrated-as. Emitting .syntax unified when those are used fixes
this. This matches the change made to ghash-armv4.pl in
6cf412c473d8145562b76219ce3da73b201b3255.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/3694)

rsa/rsa_gen.c: harmonize keygen's ability with RSA_security_bits.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4791)

rsa/rsa_lib.c: make RSA_security_bits multi-prime aware.

Multi-prime RSA security is not determined by modulus length alone, but
depends even on number of primes. Too many primes render security
inadequate, but there is no common amount of primes or common factors'
length that provide equivalent secuity promise as two-prime for given
modulus length. Maximum amount of permitted primes is determined
according to following table.

   <1024 | >=1024 | >=4096 | >=8192
   ------+--------+--------+-------
     2   |   3    |   4    |   5

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4791)

Fix lshift tests

Commit 30bea14be6 converted bntest.c to the new TEST framework.
Unfortunately a missing "goto err" means that the lshift tests skip
the actual bit that tests them. Replacing the "goto err" reveals that
the conversion also broke the tests. This adds back the missing "goto err"
and fixes the tests.

Fixes #4808

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4809)

Fix docs for EVP_EncryptUpdate and EVP_DecryptUpdate

Fixes #4775
[skip ci]

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4776)

Fix SSL_state_string() and SSL_state_string_long()

These functions needed updates for the various state machine states that
have been added for TLSv1.3.

Fixes #4795

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4801)

Test support for time_t comparisons.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4797)

use size_t tests instead of int ones

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4797)

Check for malloc failure

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4805)

Fix SOURCE_DATE_EPOCH bug; use UTC

Thanks to Juro Bystricky for the suggestion and prototype.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4644)

chacha/asm/chacha-x86_64.pl: fix sporadic crash in AVX512 code path.

Only chacha_internal_test is affected, since this path is not used
from EVP.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4758)

poly1305/asm/poly1305-x86_64.pl: switch to pure AVX512F.

Convert AVX512F+VL+BW code path to pure AVX512F, so that it can be
executed even on Knights Landing. Trigger for modification was
observation that AVX512 code paths can negatively affect overall
Skylake-X system performance. Since we are likely to suppress
AVX512F capability flag [at least on Skylake-X], conversion serves
as kind of "investment protection".

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4758)

Pretty-print large INTEGERs and ENUMERATEDs in hex.

This avoids taking quadratic time to pretty-print certificates with
excessively large integer fields. Very large integers aren't any more
readable in decimal than hexadecimal anyway, and the i2s_* functions
will parse either form.

Found by libFuzzer.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4790)

Create a prototype for OPENSSL_rdtsc

Switch to make it return an uint32_t instead of the various different
types it returns now.

Fixes: #3125

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #4757

Fix EVP_MD_meth_new.pod

A name too many in the NAME section, and a copyright year update

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4789)

Correct EVP_CIPHER_meth_new.pod and EVP_MD_meth_new.pod

One had some lines copied from the other, and both were missing a
proper RETURN VALUES section.

Fixes #4781

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4787)

rsa/rsa_gen.c: ensure backward compatibility with external rsa->meth.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4770)

crypto/x86_64cpuid.pl: fix AVX512 capability masking.

Originally it was thought that it's possible to use AVX512VL+BW
instructions with XMM and YMM registers without kernel enabling
ZMM support, but it turned to be wrong assumption.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add SM3/SM4 to openssl command-line tool

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4773)

Avoid unnecessary MSYS2 conversion of some arguments

Fixes #4740

The MSYS2 run-time convert arguments that look like paths when
executing a program unless that application is linked with the MSYS
run-time.  The exact conversion rules are listed here:

    http://www.mingw.org/wiki/Posix_path_conversion

With the built-in configurations (all having names starting with
"mingw"), the openssl application is not linked with the MSYS2
run-time, and therefore, it will receive possibly converted arguments
from the process that executes it.  This conversion is fine for normal
path arguments, but it happens that some arguments to the openssl
application get converted when they shouldn't.  In one case, it's
arguments like '-passin file:something', and in another, it's a file:
URI (what typically happens is that URIs without an authority
component get converted, 'cause the conversion mechanism doesn't
recognise them as URIs).

To avoid conversion where we don't want it, we simply assign
MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions.  As a
precaution, we only do this where we obviously need it.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4765)

If a server is not acknowledging SNI then don't reject early_data

SNI needs to be consistent before we accept early_data. However a
server may choose to not acknowledge SNI. In that case we have to
expect that a client may send it anyway. We change the consistency
checks so that not acknowledging is treated more a like a "wild card",
accepting any SNI as being consistent.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)

Provide a more information early_data message in s_server

s_server reported early_data not being sent and early_data being
rejected in the same way, i.e. "No early data received". This is
slightly misleading so this commit provides a different error message
if the early data is rejected.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)

Allow a client to send early_data with SNI if the session has no SNI

We can only send early_data if the SNI is consistent. However it is valid
for the client to set SNI and the server to not use it. This would still be
counted as consistent. OpenSSL client was being overzealous in this check
and disallowing this scenario.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)

Ignore the session when setting SNI in s_client

As per this comment:

https://github.com/openssl/openssl/issues/4496#issuecomment-337767145

Since the server is entitled to reject our session our ClientHello
should include everything that we would want if a full handshake were
to happen. Therefore we shouldn't use the session as a source of
information for setting SNI.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)

Support multi-prime RSA (RFC 8017)

* Introduce RSA_generate_multi_prime_key to generate multi-prime
  RSA private key. As well as the following functions:
    RSA_get_multi_prime_extra_count
    RSA_get0_multi_prime_factors
    RSA_get0_multi_prime_crt_params
    RSA_set0_multi_prime_params
    RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)

Support public key and param check in EVP interface

EVP_PKEY_public_check() and EVP_PKEY_param_check()

Doc and test cases are added

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)

Iron out /WX errors in VC-WIN32.

Reviewed-by: Richard Levitte <levitte@openssl.org>

bn/bn_exp.c: harmonize BN_mod_exp_mont_consttime with negative input.

All exponentiation subroutines but BN_mod_exp_mont_consttime produce
non-negative result for negative input, which is confusing for fuzzer.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4676)

Fix AppVeyor/VC build failure

..\test\asn1_internal_test.c(96): warning C4113: 'int (__cdecl *)()'
differs in parameter lists from 'int (__cdecl *)(void)'

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4744)

bn/bn_add.c: address performance regression.

Performance regression was reported for EC key generation between
1.0.2 and 1.1.x [in GH#2891]. It naturally depends on platform,
values between 6 and 9% were observed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4743)

Modify expected output of a CRL to match the changed printout

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4746)

Add padding spaces before printing signature algorithm for CRLs output

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4746)

Modify expected output of a certificate to match the changed printout

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4746)

Add padding spaces before printing algo.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Rich Salz <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1513)

Revert "Add padding spaces before printing algo."

Some test files need to be updated.
This reverts commit 26a374a271dabd49f3fa7f43a74e05d34aca010e.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4745)

Add padding spaces before printing algo.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Rich Salz <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1513)

Factorise duplicated code.

Extract and factorise duplicated string glue code.
Cache strlen result to avoid duplicate calls.
[extended tests]

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4719)

remove magic number

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4719)

ARMv8 assembly pack: add Qualcomm Kryo results.

[skip ci]

Reviewed-by: Tim Hudson <tjh@openssl.org>

Configurations/10-main.conf: add back /WX to VC-WIN32.

We had /WX (treat warnings as errors) in VC-WIN32 for long time. At
some point it was somehow omitted. It's argued that it allows to
keep better focus on new code, which motivates the comeback...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

Resolve warnings in VC-WIN32 build, which allows to add /WX.

It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

ssl/ssl_asn1.c: resolve warnings in VC-WIN32 build, which allows to add /WX.

It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...

[Keep this commit separate as reminder for time overhaul.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

evp/pbe_scrypt.c: add boundary condition for implicit cast.

Even though |Blen| is declared uint64_t it was casted implicitly to int.
[Caught by VC warning subsytem.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

asn1/a_strex.c: fix flags truncation in do_esc_char.

|flags| argument to do_esc_char  was apparently truncated by implicit
cast. [Caught by VC warning subsytem.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)

Fix typo that cause find-doc-nits failure

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4727)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)

Add OCSP API test executable

Some of the OCSP APIs (such as the recently added OCSP_resp_get0_signer)
do not really merit inclusion in the ocsp(1) utility, but we should still
have unit tests for them.

For now, only test OCSP_resp_get0_signer(), but it should be easy to
add more tests in the future.

Provide an X509 cert and private key in the test's data directory
to use for signing responses, since constructing those on the fly
is more effort than is needed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)

Add an API to get the signer of an OCSP response

Add a new function OCSP_resp_get0_signer() that looks in the
certs bundled with the response as well as in additional certificates
provided as a function argument, returning the certificate that signed
the given response (if present).

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)

Typo fix

CLA: trivial

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4705)

Many spelling fixes/typo's corrected.

Around 138 distinct errors found and fixed; thanks!

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)

lhash.c: Replace Unicode EN DASH with the ASCII char '-'.

 * addressing", Proc. 6th Conference on Very Large Databases: 212–223
                                                                 ^
The EN DASH ('–') in this line is one UTF-8 character (hex: e2 80 93).
Under some code page setting (e.g. 936), Visual Studio may report C4819
warning: The file contains a character that cannot be represented in the
current code page.

Replace this character with the ASCII char '-' (Hex Code: 2D).

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4691)

Fix possible leaks on sk_X509_EXTENSION_push() failure ...

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4677)

util/copy.pl: work around glob quirk in some of earlier 5.1x Perl versions.

In earlier 5.1x Perl versions quoting globs works only if there is
white space. If there is none, it's looking for names starting with ".

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4695)

00-base-templates.conf: fix ia64 builds.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix an s_client memory leak

We were using OPENSSL_strdup() unnecessarily and then failing to free it. There is
no reason to use OPENSSL_strdup() in this scenario - so just remove it.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4699)

Configurations/unix-Makefile.tmpl: fix HP-UX build.

HP-UX make doesn't recognize $< in explict target rules, only in
inference ones such as .c.o.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4697)

OPENSSL_ia32cap: reserve for new extensions.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't NULL check before calling DSO_free.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4703)

Removre comment with user's name

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4702)

Various typo

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4457)

style : fix some if(...

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4457)

Configure: cleanup @disable_cascade

'rsa', 'sha' and 'tlsext' can't be disabled, not even as a consequence
of other conditions, so having cascading disables that depend on them
is futile.  Clean up!

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4693)

Warn if -days without -x509

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4692)

Mark a zero length record as read

If SSL_read() is called with a zero length buffer, and we read a zero length
record then we should mark that record as read.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4685)

Fix race condition in TLSProxy

Normally TLSProxy waits for the s_server process to finish before
continuing. However in cases where serverconnects > 1 we need to keep the
s_server process around for a later test so we continue immediately. This
means that TAP test output can end up being printed to stdout at the same
time as s_server is printing stuff. This confuses the test runner and can
cause spurious test failures. This commit introduces a small delay in cases
where serverconnects > 1 in order to give s_server enough time to finish
what it was doing before we continue to the next test.

Fixes #4129

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4660)

Remove 4 broken macros from ocsp.h

There were 4 macros in ocsp.h that have not worked since 1.1.0 because
they attempt to access the internals of an opaque structure.

For OCSP_REQUEST_sign() applications should use OCSP_request_sign() instead.
For OCSP_BASICRESP_sign() applications should use OCSP_basic_sign() instead.
For OCSP_REQUEST_verify() applications should use OCSP_request_verify()
instead.
For OCSP_BASICRESP_verify() applications should use OCSP_basic_verify()
instead.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4635)

Disabled list doesn't contain SM3 and SM4.

The Chinese cryptographic operations should appear in the disabled list if they
are disabled.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4678)

SM3: restructure to EVP internal and update doc to right location

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)

SM3: Add SM3 hash function

SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)

Implement Maximum Fragment Length TLS extension.

Based on patch from Tomasz Moń:
https://groups.google.com/forum/#!topic/mailing.openssl.dev/fQxXvCg1uQY

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/1008)

aes/asm/{aes-armv4|bsaes-armv7}.pl: make it work with binutils-2.29.

It's not clear if it's a feature or bug, but binutils-2.29[.1]
interprets 'adr' instruction with Thumb2 code reference differently,
in a way that affects calculation of addresses of constants' tables.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4669)

Conditionalize fuzz tests on feature macros

Do not try to fuzz-test structures/routines that are compiled
out of the library due to library configuration.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4664)

Check return value of OBJ_nid2obj in dsa_pub_encode.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4600)

Add error handling in dsa_main and ASN1_i2d_bio.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4600)

Fix error handling in i2d* functions.

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4600)

Update asn1 and x509 corpora

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #4653

ASN1 fuzzer: Use d2i_TYPE / i2d_TYPE functions

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #4648

Don't turn b2 negative

b2 being negative is ignored

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #4648

Update location of the libfuzzer repository

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #4648

Travis: if "make update" created a diff, please show it

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4652)

Update CHANGES and NEWS for new release

Reviewed-by: Andy Polyakov <appro@openssl.org>

test/bntest.c: add bn_sqrx8x_internal regression test.

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn/asm/x86_64-mont5.pl: fix carry bug in bn_sqrx8x_internal.

Credit to OSS-Fuzz for finding this.

CVE-2017-3736

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix small but important regression

In OpenSSL pre 1.1.0, 'openssl x509 -CAkeyformat engine' was possible
and supported.  In 1.1.0, a small typo ('F' instead of 'f') removed
that possibility.  This restores the pre 1.1.0 behavior.

Fixes #4366

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4643)