Fix no-sock

Misc fixes for no-sock

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-gost

Configure had the wrong name for the no-gost option.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't use hardcoded values for types

Reviewed-by: Rich Salz <rsalz@openssl.org>

In for loop values, introduce a dummy to protect against empty list

In constructions such as 'for x in $(MAKEVAR); do ...', there's the
possibility that $(MAKEVAR) is en empty value.  Some shells don't like
that, so introduce a dummy value that gets discarded:

    for x in dummy $(MAKEVAR); do
        if [ "$$x" = "dummy" ]; then continue; fi

Closes RT#4459

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-seed

Fix compilation with --strict-warnings and no-seed

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove the no-rijndael option

Rijndael is an old name for AES.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Fix no-scrypt

Fix the evp tests when no-scrypt is used.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Skip the CMS tests if CMS is disabled

This fixes the no-cms compile time option.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Fix no-dsa

Misc fixes for no-dsa.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Build system: VC-WIN64I fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configurations/windows-makefile.tmpl: respect no-makedepend.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Windows build system: get uplink right.

Reviewed-by: Richard Levitte <levitte@openssl.org>

config: fix off-by-centimeter-to-the-right typo.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Configurations/10-main.conf: freeze -std option in darwin*-ppc-cc.

RT#4422

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove mk1mf documentation

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove the remainder of util/mk1mf.pl and companion scripts

This removes all scripts that deal with MINFO as well, since that's
only used by mk1mf.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove generation of ms/version32.rc from Configure, use util/mkrc.pl

utils/mkrc.pl was added a while ago as a better generator for the
Windows DLL resource file.  Finalize the change by removing the
ms/version32.rc generator from Configure and adding resource file
support using mkrc.pl in Configurations/windows-makefile.pl

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove the mk1mf VC-WIN* builds and its supporting scripts

The mk1mf build for the VC-WIN* targets is broken and the unified
scheme works well enough, so we clean out the old.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Fix ALPN - more fixes

* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a comment on dane_verify() logic

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove #error from include files.

Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.

Reviewed-by: Richard Levitte <levitte@openssl.org>

GH886: CONNECT should use HTTP/1.1

By default you get 0.9 which isn't widely available.
But we use HTTP/1.0 for now.
Courtesy beusink@users.github.com

Reviewed-by: Tim Hudson <tjh@openssl.org>

Have makedepend output to stdout and redirect it

This gives us better control of what files are produced.

Reviewed-by: Andy Polyakov <appro@openssl.org>

ct_int.h only needed by crypto/ct

Merge ct_int.h into ct_locl.h

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

constify DSA_SIG_get0()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move blake2_loclh to blake2 directory

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Fixed language
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fixed a bunch of typos in the docs

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

constify ECDSA_SIG_get0()

PR#4436

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

If the asm file to be compiled isn't generated, leave the ext alone

Closes RT#4447

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

make update

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Don't let 'generate' target depend on generated files, act directly instead

One of the 'generate' targets depended on $(SRCDIR)/apps/progs.h,
which depended on...  nothing.  This meant it never got regenerated
once it existed, regardless of need.  Of course, we could have it
depend on all the files checked to generate it, but they also depend
on progs.h, so we'd end up getting cricular dependencies, which makes
make unhappy.

Furthermore, and this applies for the other generated files, having
them as targets means that they may be regenerated on the fly in some
cases, and since they get written to the source tree, this isn't such
a good idea if that tree is read-only (which is a possible situation
in an out-of-tree build).

So, we move all the actions to the 'generate' targets themselves, thus
making sure they get regenerated in a controlled manner and regardless
of dependencies.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

apps/progs.pl: add back the INCLUDE_FUNCTION_TABLE wrapper

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Revert "Ignore the generated apps/progs.h"

This reverts commit 91056e72693b4ee8cb5339d9091871ffc3b6f776.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Revert "Generate apps/progs.h on the fly"

This reverts commit 04e2a527379ad12ca512aef4e838f94af22d7f79.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Revert "Include progs.h directly in openssl.c instead of via apps.h"

This reverts commit a45d7d5388c6774a484cff4af13f188240d3d50b.

Reviewed-by: Rich Salz <rsalz@openssl.org>

GH36: Add casts to match the documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>

Correct faulty L<> links in .pods

Closes RT#4450

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a few more quotes for Windows (install_ssldirs)

Reviewed-by: Rich Salz <rsalz@openssl.org>

The command source are files, not directories

Therefore, they should be concatenated with the source directory using
catfile(), not catdir()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Replace sed command with perl

Some implementations of sed require a newline before an ending '}'.
The easier method is to replace that sed command with the
corresponding perl command.

Closes RT#4448

Reviewed-by: Rich Salz <rsalz@openssl.org>

Clear the exit code from 'find' in 'make depend'

Depending on what has been built so far, all .d files may not be
present and 'find' will exit with non-zero exit code.  This isn't a
bother for us but may break make, so clear the exit code with an added
'exit 0'.

Closes RT#4444

Reviewed-by: Rich Salz <rsalz@openssl.org>

Shut find up about files not found

Some of the files in $(DEPS) might not exist.  We don't need to know.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't free up EVP_MD_CTX.

Don't free up passed EVP_MD_CTX in ASN1_item_sign_ctx(). This
simplifies handling and retains compatiblity with previous behaviour.

PR#4446

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Use the dependencies received in generatesrc()

generatesrc() did already receive dependency information, but never
used it, and never really needed to...  until now.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ignore the generated apps/progs.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

Generate apps/progs.h on the fly

Reviewed-by: Rich Salz <rsalz@openssl.org>

Include progs.h directly in openssl.c instead of via apps.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make apps/progs.pl more flexible

Make Configure write @disablables to configdata.pm and have
apps/progs.pl use that data.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct the export list when writing configdata.pm

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct the check of files to depend on against known generated ones

The check was erroneously inversed

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't perform tsa tests if configured "no-ts"

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct incorrect path

In crypto, buildinf.h depends on ../configdata.pm, not ./configdata.pm

Reviewed-by: Rich Salz <rsalz@openssl.org>

Better 'make depend' mechanism

Instead of relying on the '-nt' test operator, which doesn't exist
everywhere, use find's '-newer' to find out if any of the known .d
files is newer than Makefile.

Closes RT#4444

Reviewed-by: Andy Polyakov <appro@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Implement support for no-ts

Reviewed-by: Rich Salz <rsalz@openssl.org>

apps/progs.pl: more consistent output for digests

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-des

Numerous fixes for no-des.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-dgram

A few places in s_client needed some OPENSSL_NO_DTLS guards which fixes
no-dgram.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-deprecated

The no-deprecated build was failing because afalg was relying on a
transitive include that does not exist in a no-deprecated build.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-cmac

There were a couple of CMAC references without OPENSSL_NO_CMAC guards.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test to see that signals are caught as failures

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Make OpenSSL::Test::run() sensitive to signals

$? in perl gets the status value from wait(2), which is a word with
the exit code in the upper half and the number of a raised signal in
the lower half.  OpenSSL::Test::run() ignored the signal half up until
now.

With this change, we recalculate an exit code the same way the Unix
shells do, using this formula:

    ($? & 0x7f) ? ($? & 0x7f)|0x80 : ($? >> 8);

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Remove more unused things.

Moved doc/standards.txt to the web.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Resolved unresolved symbols with no-hw

Compiling on Windows with no-hw was resulting in unresolved symbols
in the padlock engine.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure that no-comp functions are flagged as such

mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-rc2 in the CMS test

The CMS test uses some RC2 keys which should be skipped if the RC2 is
disabled.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Mark OCB as an AEAD cipher

OCB is AEAD capable but was not marked as such with the
EVP_CIPH_FLAG_AEAD_CIPHER flag.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Ensure that memory allocated for the ticket is freed

If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix a potential double free in EVP_DigestInit_ex

There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix build; CPP syntax error.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Update EVP_CIPHER_CTX_set_padding documentation.

Add note about when EVP_CIPHER_CTX_set_padding should be called.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

README: small fixups

Don't refer to INSTALL files that don't exist any more.
Make it clear that the libssl and libcrypto libraries may be named
differently on different platforms.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make picker, thread and combine standard config helper functions

Document them as well

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove Netware and OS/2

Reviewed-by: Richard Levitte <levitte@openssl.org>

Disallow --classic for Windows

With all the config changes, mk1mf is broken on Windows.

Reviewed-by: Rich Salz <rsalz@openssl.org>

windows-makefile.tmpl: Stop keeping temporary files

Reviewed-by: Andy Polyakov <appro@openssl.org>

Add install targets for Windows

On Windows, we set INSTALLTOP to default as follows:

  VC-WIN32:

    PREFIX:     %ProgramFiles(x86)%\OpenSSL
    OPENSSLDIR: %CommonProgramFiles(x86)%\SSL

  VC-WIN64*:

    PREFIX:     %ProgramW6432%\OpenSSL
    OPENSSLDIR: %CommonProgramW6432%\SSL

Should those environment variables be missing, the following is used
as fallback:

    PREFIX:     %ProgramFiles%\OpenSSL
    OPENSSLDIR: %CommonProgramFiles%\SSL

Reviewed-by: Andy Polyakov <appro@openssl.org>

Report TLS 1.0 as backwards-compatible TLSv1

The TLSv1.0 form is retained for reporting the first protocol version
that supports a given cupher.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove ultrix/mips support.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove support for Borland C++

Borland C++ 4.5 is very old and our "support" for it is already
non-existent, we might as well remove it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Use correct C format for keysets.pl

Reviewed-by: Richard Levitte <levitte@openssl.org>

Start documenting Configure internals

This is a living document, everyone is encouraged to add to it.
Implementation details as well as broader implementation philosophy
has a place here.

I'm starting with documentation of the how conditions in build.info
files are treated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Added build.info debugging capability to Configure

This is only enabled when the environment variable
CONFIGURE_DEBUG_BUILDINFO is defined.  This will cause every line in
every build.info file to be displayed, along with the content of the
skip stack before and after parsing.  This can be a very powerful tool
to see that all conditions are working as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Simplify define as we don't support MS-DOS anymore.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Don't define OPENSSL_ENGINES in test recipes, do it in Makefiles instead

In most builds, we can assume that engines live in the build tree
subdirectory "engines".  This was hard coded into the tests that use
the engine ossltest.

However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.

This change has us play it safe and let the build files tell the
testing framework where the engines are.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Have 'openssl version -a' output the default engines directory as well

Reviewed-by: Rich Salz <rsalz@openssl.org>

Bugfix: Encode the requested length in s_cb.c:hexencode()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Sort cipher-list at runtime.

Reduces #ifdef complexity.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

unix-Makefile template: use $(PERL) everywhere

There was one spot that had hard-coded 'perl'

Reviewed-by: Rich Salz <rsalz@openssl.org>

Deal with DSA_SIG opaqueness.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.1.0-pre5-dev

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Prepare for 1.1.0-pre4 release

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Some platforms provide getcontext() but it does not work

Some platforms claim to be POSIX but their getcontext() implementation
does not work. Therefore we update the ASYNC_is_capable() function to test
for this.

RT#4366

Reviewed-by: Richard Levitte <levitte@openssl.org>

When building DLLs, hack the library name in the .def file

util/mkdef.pl assumes it knows what the resulting library name will
be.  Really, it shouldn't, but changing it will break classic native
Windows builds, so we leave it for now and change the LIBRARY line
externally when needed instead.

Reviewed-by: Matt Caswell <matt@openssl.org>

DLL object files should not be built with /Zl"

When building the DLLs, we depend on the correct default C RTL info.

Reviewed-by: Matt Caswell <matt@openssl.org>

Appveyor - make sure to actually build "shared" in the shared configuration

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix up CHANGES

- Remove duplicate entry
- Add author for SSL_CIPHER query functions
- Note HKDF support in CHANGES and NEWS

[ci skip]

Reviewed-by: Richard Levitte <levitte@openssl.org>

We should use $SRCDIR in Makefiles

Normally we always refer to source files relative to $SRCDIR in Makefiles.
However the reference to unix-Makefile.tmpl was using a fully expanded
absolute path. This can cause problems for Mingw.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Disable AFALG when cross-compiling

We don't currently support cross-compiling of the afalg engine. However
we were failing to explicitly mark it as disabled during Configure leading
to a failed build.

Reviewed-by: Richard Levitte <levitte@openssl.org>