Denys Vlasenko [Fri, 14 Feb 2020 15:16:34 +0000 (16:16 +0100)]
ash: parser: Fix incorrect eating of backslash newlines
Keeping up with upstream (in our case, 'before patch' code is not buggy).
Upstream commit:
Date: Fri, 11 May 2018 23:41:25 +0800
parser: Fix incorrect eating of backslash newlines
With the introduction of synstack->syntax, a number of references
to the syntax variable was missed during the conversion. This
causes backslash newlines to be incorrectly removed in single
quote context.
This patch also combines these calls into a new helper function
pgetc_top.
Fixes:
ab1cecb40478 ("parser: Add syntax stack for recursive...")
Reported-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 14 Feb 2020 15:12:06 +0000 (16:12 +0100)]
ash: use pgetc_eatbnl() in more places, take 2
Adding previously skipped "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes
from upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 14 Feb 2020 12:57:41 +0000 (13:57 +0100)]
fdisk: add HFS / HFS+ partition type
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 13 Feb 2020 14:27:23 +0000 (15:27 +0100)]
tftp: on download, open local file only when first bit of data arrived
No reason to potentially clobber existing file before absolutely necessary.
function old new delta
tftp_protocol 1947 2020 +73
tftp_main 393 376 -17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 73/-17) Total: 56 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 13 Feb 2020 14:03:12 +0000 (15:03 +0100)]
tftp: fix thinko in code shrink
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 13 Feb 2020 12:01:43 +0000 (13:01 +0100)]
tftp: code shrink
function old new delta
tftp_protocol 1949 1947 -2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 13 Feb 2020 11:58:46 +0000 (12:58 +0100)]
tftpd: show requested file name in open error message
function old new delta
tftp_protocol 1902 1949 +47
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 2 Feb 2020 22:28:55 +0000 (23:28 +0100)]
awk: fix more "length" cases, closes 12486
function old new delta
next_token 808 831 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Tue, 21 Jan 2020 16:01:58 +0000 (16:01 +0000)]
ash,hush: allow builtins to be tab-completed, closes 7532
function old new delta
complete_cmd_dir_file 678 830 +152
get_builtin_name - 35 +35
optschanged 125 132 +7
hush_main 1069 1076 +7
save_command_ps_at_cur_history 76 78 +2
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/0 up/down: 203/0) Total: 203 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jan 2020 13:16:45 +0000 (13:16 +0000)]
xargs: fix handling of quoted arguments, closes 11441
As reported in bug 11441 when presented with a large number of quoted
arguments xargs can return 'argument line too long':
seq 10000 29999 | sed -e 's/^/"/' -e 's/$/"/' | busybox xargs echo
This happens because the variant of process_stdin() which handles quoted
arguments doesn't preserve state between calls. If the allowed number
of characters is exceeded part way through a quoted argument the next
call to process_stdin() incorrectly treats the terminating quote as a
starting quote, thus quoting all of the argument separators.
function old new delta
process_stdin 274 303 +29
xargs_main 731 745 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 43/0) Total: 43 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Thu, 23 Jan 2020 15:31:19 +0000 (15:31 +0000)]
vi: fixes to string search in colon commands, closes 10321
Handling of string searches in colon commands (e.g ':/pat1/,/pat2/cmd')
differ from standard vi:
- As reported in bug 10321 such searches can't be repeated using the
'n' command. This is because the last search pattern isn't updated.
- The search also can't be repeated using the command '://' because
an empty search pattern doesn't imply the use of the last search
pattern.
- Such searches should start on the line after the current line,
otherwise '://' never moves to the next occurrence of the pattern.
This can also affect other cases where line ranges are specified
using search patterns.
Fix these various issues.
function old new delta
get_one_address 325 342 +17
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Thu, 23 Jan 2020 11:26:08 +0000 (11:26 +0000)]
ash: improve expandstr()
The dash maintainer recently posted a fix for issues with expanding
PS1. These had already been fixed differently in BusyBox ash. Borrow
a couple of improvements:
- Use a single call to setjmp() to trap errors in both readtoken1()
and expandarg().
- In case of error set the prompt to the literal value of PS1 rather
than the half-digested nonsense in stackblock() which might include
ugly control characters.
function old new delta
expandstr 353 300 -53
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Peter Korsgaard [Mon, 27 Jan 2020 14:36:41 +0000 (15:36 +0100)]
syslogd: add config option to include milliseconds in timestamps
For some use cases, having logs with more than 1 second accuracy can be
helpful. Add an option to include milliseconds when adding a timestamp in
HH:MM:SS.mmm format, similar to syslog-ng with fraq_digits(3) or journalctl
-o short-precise.
For simplicity, abuse the remaining space in the buffer used by ctime to add
the millieconds (overwriting year).
function old new delta
timestamp_and_log 401 448 +47
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 14 Jan 2020 16:05:48 +0000 (17:05 +0100)]
udhcpd: mangle hostnames starting with dash ("-option")
function old new delta
add_lease 316 328 +12
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 3 Dec 2019 13:52:17 +0000 (14:52 +0100)]
whois: limit total length of response to 32+2 kb
function old new delta
query 517 554 +37
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 3 Dec 2019 12:48:55 +0000 (13:48 +0100)]
init: improve handling of signals racing with each other
Before this change, a request to reboot could be "overwritten" by e.g.
SIGHUP.
function old new delta
init_main 709 793 +84
packed_usage 33273 33337 +64
run_actions 109 117 +8
stop_handler 87 88 +1
check_delayed_sigs 340 335 -5
run 214 198 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/2 up/down: 157/-21) Total: 136 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 2 Dec 2019 15:39:54 +0000 (16:39 +0100)]
init: if tcgetattr() fails, don't even try to tcsetattr()
function old new delta
set_sane_term 111 114 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 28 Nov 2019 09:28:14 +0000 (10:28 +0100)]
hush: fix preprocessor directives indentation
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Tomi Leppanen [Mon, 25 Nov 2019 15:59:52 +0000 (17:59 +0200)]
grep: add -R
This adds -R option to grep similar to GNU grep. It is the same as -r
but also dereferences symbolic links to directories.
function old new delta
grep_main 834 850 +16
packed_usage 33362 33368 +6
grep_file 1440 1441 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Tomi Leppanen <tomi.leppanen@jolla.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 23 Nov 2019 16:25:21 +0000 (17:25 +0100)]
bc: fix comparison bug, closes 12336
function old new delta
bc_num_cmp 249 259 +10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alistair Francis [Tue, 19 Nov 2019 12:06:40 +0000 (13:06 +0100)]
Remove stime() function calls
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 17 Nov 2019 16:48:53 +0000 (17:48 +0100)]
Updated inittab example documentation
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Liu, Shuang (ADITG/ESM) [Wed, 13 Nov 2019 14:36:20 +0000 (14:36 +0000)]
chgrp: correct the usage for non-desktop chgrp calls
When IF_DESKTOP is not defined, chown and chgrp only takes option -R -h,
However the usage output of chgrp is wrong:
$ ./busybox.nosuid chown
Usage: chown [-Rh]... USER[:[GRP]] FILE...
$ ./busybox.nosuid chgrp
Usage: chgrp [-RhLHP]... GROUP FILE...
$ ./busybox.nosuid chgrp -H group dummy
chgrp: invalid option -- 'H'
Usage: chgrp [-RhLHP]... GROUP FILE...
The chgrp is now a wrapper of chown, so the recognized options shall be the same.
This is introduced by
34425389e09353a8dacdd6b23a62553f699c544c
I would expect the correct behavior shall be the same as chown.
So suggest the below patch, the behavior shall be:
$ ./busybox.nosuid chgrp
Usage: chgrp [-Rh]... GROUP FILE...
Signed-off-by: Shuang Liu <sliu@de.adit-jv.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 9 Nov 2019 16:32:43 +0000 (17:32 +0100)]
taskset: tighten the check for stride values
function old new delta
taskset_main 986 987 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 9 Nov 2019 16:05:14 +0000 (17:05 +0100)]
taskset: implement stride argument
function old new delta
taskset_main 925 986 +61
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 8 Nov 2019 15:37:28 +0000 (16:37 +0100)]
unxz: show -t in --help
function old new delta
packed_usage 33236 33247 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 8 Nov 2019 15:32:37 +0000 (16:32 +0100)]
taskset: update comment
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 1 Nov 2019 14:44:49 +0000 (15:44 +0100)]
taskset: add support for taking/printing CPU list (-c option)
function old new delta
taskset_main 511 855 +344
Based on patch by Fryderyk Wrobel <frd1996@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 1 Nov 2019 13:16:07 +0000 (14:16 +0100)]
hush: restore redirected stdin
function old new delta
restore_redirects 52 95 +43
save_fd_on_redirect 243 253 +10
hfopen 90 99 +9
fgetc_interactive 259 261 +2
builtin_type 117 115 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 64/-2) Total: 62 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 30 Oct 2019 11:13:46 +0000 (12:13 +0100)]
ntpd: decrease MIN_FREQHOLD by 2, increase "penalty" for largish offset x2
> 2018-07-25:
> ntpd: increase MIN_FREQHOLD by 3
> This means we'll start correcting frequency ~5 minutes after start,
> not ~3.5 ones.
> With previous settings I still often see largish ~0.7s initial offsets
> only about 1/2 corrected before frequency correction kicks in,
> resulting in ~200ppm "correction" which is then slowly undone.
Review of real-world results of the above shows that with small
initial offsets, freq correction can be allowed to kick in sooner,
whereas with large (~0.8s) offsets, we still start freq correction
a bit too soon.
Let's rebalance this a bit.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Jo-Philipp Wich [Thu, 27 Jun 2019 15:27:29 +0000 (17:27 +0200)]
nslookup: implement support for SRV records
Add support for querying and parsing SRV DNS records.
function old new delta
send_queries 1711 1865 +154
qtypes 72 80 +8
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Jo-Philipp Wich [Thu, 27 Jun 2019 15:27:28 +0000 (17:27 +0200)]
nslookup: handle replies without RRs
Under some circumstances, a DNS reply might contain no resource records,
e.g. when a valid domain is queried that does not have records of the
requested type.
Example with nslookup from BIND dnsutils:
$ nslookup -q=SRV example.org
Server: 10.11.12.13
Address: 10.11.12.13#53
Non-authoritative answer:
*** Can't find example.org: No answer
Currently the busybox nslookup applet simply prints nothing after the
"Non-authoritative answer:" line in the same situation.
This change modifies nslookup to either print "Parse error" or "No answer"
diagnostics, depending on the parse_reply() return value.
function old new delta
send_queries 1676 1711 +35
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 26 Oct 2019 18:04:34 +0000 (20:04 +0200)]
gunzip: fix incorrect decoding of "fixed" inflate blocks
function old new delta
huft_build 1008 1022 +14
inflate_block 1253 1256 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 17/0) Total: 17 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 15:47:22 +0000 (17:47 +0200)]
hdparm: placate "warning: taking the absolute value of unsigned type"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 15:42:23 +0000 (17:42 +0200)]
vi: placate "warning: shifting a negative signed value is undefined"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 15:40:57 +0000 (17:40 +0200)]
read_key(): placate "warning: shifting a negative signed value is undefined"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 15:35:58 +0000 (17:35 +0200)]
ntpd: abs(tmx.offset) was truncating a "long" typed value
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 11:41:31 +0000 (13:41 +0200)]
tc: array address is never NULL
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 11:39:41 +0000 (13:39 +0200)]
traceroute: fix gcc-ism
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 11:05:15 +0000 (13:05 +0200)]
suppress a few "unused function" warnings
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 11:00:01 +0000 (13:00 +0200)]
netstat: suppress a warning (conversion from 'int' to 'smallint' changes value)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 10:56:51 +0000 (12:56 +0200)]
Makefile.flags: suppress some clang-9 warnings
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 10:12:22 +0000 (12:12 +0200)]
clang/llvm 9 fix - do not eliminate a store to a fake "const"
This is *much* better (9 kbytes better) than dropping "*const"
optimization trick.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 25 Oct 2019 08:30:53 +0000 (10:30 +0200)]
tar: fix fallout of: change -a from meaning "lzma" to mean "autodetect by extension"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 24 Oct 2019 14:26:55 +0000 (16:26 +0200)]
Remove syscall wrappers around clock_gettime, closes 12091
12091 "Direct use of __NR_clock_gettime is not time64-safe".
function old new delta
runsv_main 1698 1712 +14
startservice 378 383 +5
get_mono 31 25 -6
date_main 932 926 -6
gettimeofday_ns 17 - -17
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/2 up/down: 19/-29) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 22 Oct 2019 12:25:43 +0000 (14:25 +0200)]
shell: better comments in BASE#nn code
function old new delta
evaluate_string 932 930 -2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 21 Oct 2019 14:47:09 +0000 (16:47 +0200)]
shell/ulimit: code shrink
text data bss dec hex filename
1001949 551 5612
1008112 f61f0 busybox_old
1001906 551 5612
1008069 f61c5 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 20 Oct 2019 17:07:06 +0000 (19:07 +0200)]
gunzip: code shrink by using int-, not short-sized struct member
function old new delta
inflate_block 1254 1253 -1
inflate_codes 629 621 -8
huft_build 1054 1008 -46
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-55) Total: -55 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 19 Oct 2019 16:52:41 +0000 (18:52 +0200)]
gzip: code shrink
huft_build() still has way too many params
function old new delta
lit - 94 +94
dist - 94 +94
huft_build 1058 1054 -4
inflate_block 1281 1254 -27
cpdext 30 - -30
cplext 31 - -31
cpdist 60 - -60
cplens 62 - -62
------------------------------------------------------------------------------
(add/remove: 2/4 grow/shrink: 0/2 up/down: 188/-214) Total: -26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 19 Oct 2019 16:33:49 +0000 (18:33 +0200)]
gzip: code shrink
huft_build() has way too many params
function old new delta
inflate_block 1293 1281 -12
huft_build 1085 1058 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-39) Total: -39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 18 Oct 2019 14:47:37 +0000 (16:47 +0200)]
telnet: add disabled code to emit EC and IP
> I'm trying to connect to a Korenix 3005 switch through telnet
> for management purposes, and all is well except for the backspace character
> - seems like my switch doesn't handle it too well and instead of erasing
> the last character all it does is print some garbage to the screen.
> I've had the same issue before while using putty, but saw a solution that
> suggests to enable "Telnet special commands" in the options menu, and it
> worked.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 15 Oct 2019 10:31:54 +0000 (12:31 +0200)]
brctl: code shrink
function old new delta
show_bridge 323 317 -6
brctl_main 2171 2164 -7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-13) Total: -13 bytes
text data bss dec hex filename
1002083 551 5612
1008246 f6276 busybox_old
1002065 551 5612
1008228 f6264 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
James Byrne [Wed, 17 Jul 2019 15:53:04 +0000 (15:53 +0000)]
config: PID_FILE_PATH required for FEATURE_CROND_SPECIAL_TIMES
When crond is built with FEATURE_CROND_SPECIAL_TIMES enabled, it creates
a file called 'crond.reboot' at CONFIG_PID_FILE_PATH, but if
FEATURE_PIDFILE is disabled, this will be an empty string and the file
will be created in the root directory, which is undesirable.
This commit makes PID_FILE_PATH depend on FEATURE_CROND_SPECIAL_TIMES as
well as FEATURE_PIDFILE so that you get sensible behaviour in crond when
FEATURE_PIDFILE is switched off.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 12 Oct 2019 17:51:46 +0000 (19:51 +0200)]
brctl: tweak help text, fix comments
function old new delta
packed_usage 33255 33236 -19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 12 Oct 2019 17:42:37 +0000 (19:42 +0200)]
brctl: fold show_bridge_ports_ into its caller
function old new delta
brctl_main 2235 2171 -64
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 12 Oct 2019 17:24:38 +0000 (19:24 +0200)]
brctl: code shrink
packed_usage 33253 33255 +2
write_uint 96 90 -6
show_bridge_timer 93 69 -24
brctl_main 2338 2235 -103
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 2/-133) Total: -131 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Lewis [Thu, 10 Oct 2019 21:00:19 +0000 (16:00 -0500)]
brctl: add support for showstp command
function old new delta
brctl_main 974 2339 +1365
show_bridge_timer - 93 +93
static.state_names - 48 +48
printf_xstrtou - 26 +26
packed_usage 33243 33253 +10
show_bridge 333 323 -10
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/1 up/down: 1542/-10) Total: 1532 bytes
text data bss dec hex filename
999868 551 5612
1006031 f59cf busybox_old
1002309 551 5612
1008472 f6358 busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 11 Oct 2019 12:11:44 +0000 (14:11 +0200)]
dpkg-deb: work around bogus error message when working with XZ compressed packages
function old new delta
unpack_xz_stream 2309 2317 +8
bb_full_fd_action 464 472 +8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Lewis [Sun, 15 Sep 2019 16:51:30 +0000 (18:51 +0200)]
replace: count_strstr - Handle an edge case where sub is empty
If sub is empty, avoids an infinite loop.
function old new delta
count_strstr 45 63 +18
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Lewis [Sun, 15 Sep 2019 16:13:28 +0000 (18:13 +0200)]
libbb: Converted safe_read to safe_write format
Changed safe_read to be symmetrical to safe_write, it shall
never return EINTR because it calls read multiple times,
the error is considered transient.
function old new delta
safe_read 44 57 +13
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alistair Francis [Wed, 18 Sep 2019 16:28:51 +0000 (09:28 -0700)]
runsv: Use 64 prefix syscall if we have to
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alistair Francis [Wed, 18 Sep 2019 16:28:50 +0000 (09:28 -0700)]
time: Use 64 prefix syscall if we have to
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alistair Francis [Wed, 18 Sep 2019 16:28:49 +0000 (09:28 -0700)]
date: Use 64 prefix syscall if we have to
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t fall back to the libc call.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Michal Kazior [Wed, 25 Sep 2019 12:03:13 +0000 (14:03 +0200)]
udhcpc: fix segmentation fault on empty bin opt
The following caused udhcpc to segfault:
busybox udhcpc -i lo -s /dev/null -x 0x3d:
function old new delta
udhcp_str2optset 629 641 +12
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Lewis [Sun, 15 Sep 2019 16:04:49 +0000 (18:04 +0200)]
brctl: add support for showmacs command
function old new delta
brctl_main 680 974 +294
packed_usage 33167 33187 +20
compare_fdbs - 19 +19
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 333/0) Total: 333 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kaarle Ritvanen [Tue, 8 Oct 2019 12:07:50 +0000 (14:07 +0200)]
ln: --no-target-directory implies --no-dereference
as in GNU coreutils
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Tomas Paukrt [Tue, 8 Oct 2019 09:51:48 +0000 (11:51 +0200)]
route: fix output of "route -n -A inet6"
The output of the command "route -n -A inet6" may be corrupted
due to partially initialized structure snaddr6 in the function
INET6_displayroutes.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 7 Oct 2019 12:25:45 +0000 (14:25 +0200)]
tee: do not intercept SIGPIPE
GNU tee does this only with -p, which we don't have yet.
function old new delta
tee_main 306 295 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 4 Oct 2019 15:16:15 +0000 (17:16 +0200)]
fdisk_aix: fix aliasing warning, comment out unused global variables
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 4 Oct 2019 14:45:04 +0000 (16:45 +0200)]
fdisk: avoid overflow in "mega/gigabytes" calculation, code shrink
function old new delta
list_disk_geometry 175 145 -30
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 25 Sep 2019 11:48:01 +0000 (13:48 +0200)]
telnet: fix uninitialized variable bug
function old new delta
telnet_main 1236 1238 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Sep 2019 12:01:00 +0000 (14:01 +0200)]
udhcpc6: add ELAPSED_TIME option to outgoing packets
function old new delta
init_d6_packet 53 121 +68
udhcpc_main 2577 2582 +5
udhcpc6_main 2593 2597 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 22 Sep 2019 21:40:10 +0000 (23:40 +0200)]
ash: fix BASE###nn bashism for bases 36..64
function old new delta
evaluate_string 876 932 +56
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 22 Sep 2019 16:26:05 +0000 (18:26 +0200)]
ash: fix BASE###nn bashism to accept letter 'digits' for bases > 9
function old new delta
evaluate_string 873 876 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kang-Che Sung [Thu, 5 Sep 2019 15:40:38 +0000 (23:40 +0800)]
bc: Add 'U' suffix in UINT_MAX preprocessor check
Without the 'U' unsigned suffix, gcc will throw a "integer constant is
so large that it is unsigned" warning.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
David Demelier [Thu, 29 Aug 2019 12:05:27 +0000 (14:05 +0200)]
wget: increase redirections limit
Some hosting services like sourceforge perform a lot of relocations
before actually serving the file. Example of current limitation:
busybox wget http://sourceforge.net/projects/fluxbox/files/fluxbox/1.3.7/fluxbox-1.3.7.tar.xz
Connecting to sourceforge.net (216.105.38.13:80)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to downloads.sourceforge.net (216.105.38.13:443)
wget: too many redirections
Signed-off-by: David Demelier <markand@malikania.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Rolf Eike Beer [Tue, 13 Aug 2019 15:41:56 +0000 (17:41 +0200)]
examples/udhcp/simple.script: print the filename actually changed
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Aaro Koskinen [Thu, 12 Sep 2019 10:04:13 +0000 (12:04 +0200)]
find: implement -empty
function old new delta
func_empty - 121 +121
packed_usage 33154 33167 +13
parse_params 1490 1500 +10
static.params 228 235 +7
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 151/0) Total: 151 bytes
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 6 Sep 2019 15:56:57 +0000 (17:56 +0200)]
gzip: code shrink
Converted a few 16-bit variables and small arrays to 32-bit.
Stopped pulling desc->FOO members into temporary local variables
in gen_bitlen(): on register-starved arches, this is a loss,
temporaries go into stack slots.
Sprinkled a few "const" on pointer arguments.
function old new delta
pack_gzip 742 745 +3
gen_codes 101 97 -4
build_tree 886 833 -53
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-57) Total: -54 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 5 Sep 2019 12:58:08 +0000 (14:58 +0200)]
examples/udhcp/simple.script: up interface on deconfig event
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 5 Sep 2019 12:31:49 +0000 (14:31 +0200)]
ash: add a FIXME comment
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 5 Sep 2019 12:07:14 +0000 (14:07 +0200)]
hush: fix "set -o INVALID" affecting -e flag state
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 5 Sep 2019 11:22:24 +0000 (13:22 +0200)]
gzip: code shrink
function old new delta
gzip_main 267 264 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Daniel Edgecumbe [Mon, 2 Sep 2019 21:09:15 +0000 (22:09 +0100)]
gzip: set default compression level to 6 when CONFIG_FEATURE_GZIP_LEVELS=n
With this change, GNU gzip -n and BusyBox gzip now produce identical output
assuming that CONFIG_GZIP_FAST=2.
>> Excuse me, but I wonder one thing: Why should we follow
>> strictly with gzip on the no-options default behavior?
> First, the default 6 compression level is a de-facto standard. BSD gzip
> and Apple gzip (on macOS) use this default as well. So there is a
> reasonable expectation that different gzip implementations act the same.
> For instance, if the default for busybox gzip becomes 9, then someone
> writing a script using busybox gzip could reasonably expect that the
> compression level will still be 9 when the same script is run on another
> system. That would be wrong. Implementations should not deviate from
> de-facto standards without a strong reason.
>
> Second, the inherent reason for this default has not gone away. While
> processor speeds have exploded since the default was set, so has the
> typical size of compressed files. Multiple gigabytes are nothing unusual
> these days. And gzip is often used for compression on the fly, precisely
> because it offers a good compromise between speed and compression ratio.
> So I believe 6 continues to be a reasonable default.
function old new delta
deflate 939 927 -12
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Daniel Edgecumbe [Mon, 2 Sep 2019 21:05:26 +0000 (22:05 +0100)]
gzip: set compression flags correctly as per standard
With this change and CONFIG_GZIP_FAST=2, CONFIG_FEATURE_GZIP_LEVELS=y,
GNU gzip and BusyBox gzip now produce identical output at each compression
level (excluding 1..3, as BusyBox does not implement these levels).
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Daniel Edgecumbe [Mon, 2 Sep 2019 21:03:14 +0000 (22:03 +0100)]
gzip: default level with ENABLE_FEATURE_GZIP_LEVELS should be 6
Fixes an off-by-one that actually resulted in level 7 being used
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Brian Foley [Thu, 5 Sep 2019 08:53:21 +0000 (10:53 +0200)]
dc: Parse error & fix out of bounds read in xc_program_printString
function old new delta
xc_program_print 712 735 +23
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Brian Foley [Thu, 5 Sep 2019 08:50:13 +0000 (10:50 +0200)]
dc: Fix segfault when executing strings generated using asciify
function old new delta
zxc_vm_process 6884 6891 +7
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Brian Foley [Thu, 5 Sep 2019 08:46:22 +0000 (10:46 +0200)]
dc: execute shouldn't pop if stack head is not a string
This matches the behaviour of both GNU dc (as specified in
its man page), and BSD dc (where stack_popstring() pops
only if the head is a string.)
Add a couple of tests to verify this behavior.
function old new delta
zxc_vm_process 6882 6884 +2
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Eivind Versvik [Sat, 24 Aug 2019 15:23:48 +0000 (17:23 +0200)]
udhcpc6: support stateless DHCPv6
-l will send Information-Request to request configuration parameters
function old new delta
packed_usage 33114 33180 +66
send_d6_info_request - 62 +62
udhcpc6_main 2534 2593 +59
udhcpc6_longopts 199 211 +12
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 199/0) Total: 199 bytes
Signed-off-by: Eivind Versvik <versvikeivind@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 11 Aug 2019 14:17:11 +0000 (16:17 +0200)]
top: do not use previous colleced data wheh "h" toggles threads display
This prevents first update from showing incorrect CPU usage data
function old new delta
handle_input 620 643 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 9 Aug 2019 18:43:40 +0000 (20:43 +0200)]
udhcpc6: s/iphdr/ip6_hdr/
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 6 Aug 2019 14:56:00 +0000 (16:56 +0200)]
nmeter: do not clamp down %Nc to minimum of 10 (think nmeter "%`nproc`c")
Also, go for unsigned divisions.
function old new delta
init_cpu 61 73 +12
collect_cpu 444 422 -22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 12/-22) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 3 Aug 2019 16:08:27 +0000 (18:08 +0200)]
stat: print nanosecond times, fix printing of empty lines
function old new delta
human_time 36 73 +37
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 2 Aug 2019 14:43:36 +0000 (16:43 +0200)]
ash: fix set -o to not show "nameless" options
Patch by Martijn Dekker <martijn@inlv.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 2 Aug 2019 13:19:56 +0000 (15:19 +0200)]
tar: change -a from meaning "lzma" to mean "autodetect by extension"
function old new delta
tar_main 1026 1100 +74
packed_usage 33311 33329 +18
tar_longopts 309 325 +16
vfork_compressor 246 210 -36
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 108/-36) Total: 72 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 1 Aug 2019 13:07:21 +0000 (15:07 +0200)]
tar: code shrink
function old new delta
writeLongname 226 228 +2
static.prefilled 48 - -48
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/0 up/down: 2/-48) Total: -46 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 29 Jul 2019 08:51:14 +0000 (09:51 +0100)]
ash: only catch unexpected exceptions in PS1 expansion
Commit
d1a2fa2a4 (ash: catch error in arithmetic expansion in PS1)
catches all exceptions raised by expandarg(). Some exceptions, such as
the EXEXIT raised when command expansion is used, are expected:
export PS1='$(echo "$ ")'
These should be processed normally or the shell hangs at the prompt.
function old new delta
expandstr 344 353 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 23 Jul 2019 09:26:54 +0000 (11:26 +0200)]
unicode: code shrink in character width determination
function old new delta
bb_wcwidth 267 238 -29
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 16 Jul 2019 13:09:06 +0000 (15:09 +0200)]
libbb: include <crypt.h> only if necessary
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
projects / oweals / busybox.git / log