Eric Andersen [Tue, 6 Apr 2004 15:26:25 +0000 (15:26 -0000)]
Eliminate all trace of the sgml based docs. It was a noble effort,
but it just never worked out...
Eric Andersen [Tue, 6 Apr 2004 15:19:52 +0000 (15:19 -0000)]
Fix it so build dependancies actually work and do something useful
Eric Andersen [Tue, 6 Apr 2004 14:28:35 +0000 (14:28 -0000)]
Fix it so usage is _always_ in sync with applets.c. Previously,
broken depends allowed these to get out of sync.
Eric Andersen [Tue, 6 Apr 2004 12:06:03 +0000 (12:06 -0000)]
Michael Tokarev, mjt at tls dot msk dot ru writes:
Fix parsing of all tag-value pairs (in modules.conf in particular).
Without this fix, code chokes badly on lines where either value or
both tag+value are missing, like bare
alias
line, or alias w/o the value like
alias some-module
(syntactically incorrect, but no need for coredumps either).
Eric Andersen [Tue, 6 Apr 2004 12:05:04 +0000 (12:05 -0000)]
Michael Tokarev, mjt at tls dot msk dot ru writes:
alias 'off' parsing fix.
It is not
alias off module
it is
alias module off
Eric Andersen [Tue, 6 Apr 2004 12:04:14 +0000 (12:04 -0000)]
Michael Tokarev, mjt at tls dot msk dot ru writes:
Initialize all fields of struct dep_t.
Without that, e.g. `busybox modprobe -v char-major-10-144' *sometimes*
fails this way (strace):
write(1, "insmod nvram `\213\f\10\n", 21) = 21
Note the garbage after module name which is taken from the m_options field,
which is not initialized in the alias reading/parsing part.
(Shell properly complains to this command, telling it can't find the
closing backtick)
Eric Andersen [Tue, 6 Apr 2004 11:56:26 +0000 (11:56 -0000)]
Christian Grigis, christian.grigis at smartdata dot ch writes:
Hello everyone,
Busybox's insmod fails to locate a module when that module is the only one
existing in the /lib/modules directory (with a unique name).
Example:
# find /lib/modules/ -type f
/lib/modules/kernel/drivers/char/bios.o
# insmod bios
insmod: bios.o: no module by that name found
# touch /lib/modules/dummy
# find /lib/modules/ -type f
/lib/modules/kernel/drivers/char/bios.o
/lib/modules/dummy
# insmod bios
Using /lib/modules/kernel/drivers/char/bios.o
As long as there is another file in the /lib/modules directory, insmod
finds it OK.
I tracked the problem down to 'check_module_name_match()' in insmod.c:
It returns TRUE when a match is found, and FALSE otherwise. In the case
where there is only one module in the /lib/modules directory (or more that
one module, but all with the same name), 'recursive_action()' will return
TRUE and we end up on line 4196 in 'insmod.c' which returns an error.
[The reason it works with more than one module with different
names is that in this case there will always be one not matching,
'recursive_action()' will return FALSE and we end up in line 4189.]
Now, from the implementation of 'recursive_action()' and from other
usages of it (tar.c, etc.), it seems to me that FALSE should be returned
to indicate that we want to stop the recursion, so TRUE and FALSE should
be inverted in 'check_module_name_match()'.
At the same time, 'recursive_action()' continues to recurse even after
the recursive call has returned FALSE; again in my understanding and
other usages of it, we can safely stop recursing at this point.
Here is my patch against 1.00-pre8:
Eric Andersen [Tue, 6 Apr 2004 11:51:45 +0000 (11:51 -0000)]
Yet more 'make allyesconfig' adjustments
Eric Andersen [Tue, 6 Apr 2004 11:46:56 +0000 (11:46 -0000)]
Make 'allyesconfig' be a bit less stupid
Eric Andersen [Tue, 6 Apr 2004 11:34:02 +0000 (11:34 -0000)]
Minor tar test update
Eric Andersen [Tue, 6 Apr 2004 11:10:50 +0000 (11:10 -0000)]
Simplify, make formatting better match the procps version
Eric Andersen [Tue, 6 Apr 2004 11:10:30 +0000 (11:10 -0000)]
Kill off the old 'tests' stuff. Write a ton of new tests for the
'testsuite' dir. Fix a bunch of broken tests. Fix the testsuite
'runtest' script so it actually reports all failures and provides
meaningful feedback.
-Erik
Eric Andersen [Tue, 6 Apr 2004 09:38:18 +0000 (09:38 -0000)]
Fix non standard 'date -R' formatting
Eric Andersen [Tue, 6 Apr 2004 00:41:39 +0000 (00:41 -0000)]
Fix the test suite script so it actually works and actually flags
all errors as such. Make verbose mode exit on FAIL and provide a
printout of the failed test run.
Eric Andersen [Mon, 5 Apr 2004 18:46:24 +0000 (18:46 -0000)]
Some test additions
Eric Andersen [Mon, 5 Apr 2004 14:30:15 +0000 (14:30 -0000)]
Patch adding support for ibs= and obs= to dd
Eric Andersen [Mon, 5 Apr 2004 13:24:07 +0000 (13:24 -0000)]
Per suggestion by Pawel Sakowski, fix the dash_arith() prototype
to return a long. We were needlessly truncating to an int.
Eric Andersen [Mon, 5 Apr 2004 13:08:08 +0000 (13:08 -0000)]
Tito, farmatito at tiscali dot it writes:
Hi to all,
I discovered a little bug in hdparm.c
(really two little bugs...I've made...sigh! Mea culpa).
Some vars were modified only locally and this could lead to wrong
results to be displayed with the -I switch and maybe with others.
Attached is a patch that fix it ( +88b).
Also attached is second patch that reduces the size a little bit:
text data bss dec hex filename
27984 624 900 29508 7344 hdparm.o (without bug-fix)
28072 624 900 29596 739c hdparm.o (with bug-fix)
28141 624 900 29665 73e1 hdparm.o (original)
but maybe this one can wait as we are in a feature freeze.
Ciao,
Tito
Eric Andersen [Mon, 5 Apr 2004 13:03:34 +0000 (13:03 -0000)]
rename uncompress.c to decompress_uncompress.c
rename unzip.c to decompress_unzip.c
Eric Andersen [Sat, 3 Apr 2004 12:36:03 +0000 (12:36 -0000)]
Everything should be made as simple as possible. But no simpler.
Rob Landley [Thu, 1 Apr 2004 09:23:30 +0000 (09:23 -0000)]
The last patch broke:
sed -i "/^boo/a fred" ipsec.conf
Which works in gnu sed. (And is _supposed_ to strip all the whitespace before
"fred".)
It also broke:
sed -i -e "/^boo/a \\" -e " fred" ipsec.conf
I.E. there can legally be spaces between the a and the backslash at the end of
the line.
And strangely enough, gnu sed accepts the following syntax as well:
sed -i "/^boo/a \\ fred" ipsec.conf
Which is a way of having the significant whitespace at the start of the line,
all on one line. (But notice that the whitespace BEFORE the slash is still
stripped, as is the slash itself. And notice that the naieve placement of
"\n" there doesn't work, it puts an n at the start of the appended line. The
double slashing is for shell escapes because you could escape the quote, you
see. It's turned into a single backslash. But \n there is _not_ turned into
a newline by the shell. So there.)
This makes all three syntaxes work in my tests. I should probably start
writing better documentation at some point. I posted my current sedtests.py
file to the list, which needs a lot more tests added as well...
Eric Andersen [Wed, 31 Mar 2004 11:53:37 +0000 (11:53 -0000)]
Patch from Hideki IWAMOTO adding support for 'cmp -n'
Eric Andersen [Wed, 31 Mar 2004 11:42:40 +0000 (11:42 -0000)]
Junio Hamano, junio at twinsun dot com writes:
The sed command in busybox 1.0.0-pre8 loses leading whitespace
in 'a' command ('i' and 'c' commands are also affected). A
patch to fix this is attached at the end of this message.
The following is a transcript that reproduces the problem. The
first run uses busybox 1.0.0-pre3 as "/bin/sed" command, which
gets the expected result. Later in the test, /bin/sed symlink
is changed to point at busybox 1.0.0-pre8 and the test script is
run again, which shows the failure.
=== reproduction recipe ===
* Part 1. Use busybox 1.0.0-pre3 as sed; this works.
root# cd /tmp
root# cat 1.sh
#!/bin/sh
cd /tmp
rm -f ipsec.conf ipsec.conf+
cat >ipsec.conf <<\EOF
version 2.0
config setup
klipsdebug=none
plutodebug=none
plutostderrlog=/dev/null
conn %default
keyingtries=1
...
EOF
sed -e '/^config setup/a\
nat_traversal=yes' ipsec.conf >ipsec.conf+
mv -f ipsec.conf+ ipsec.conf
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0
config setup
nat_traversal=yes
klipsdebug=none
plutodebug=none
plutostderrlog=/dev/null
conn %default
keyingtries=1
...
root# sed --version
sed: invalid option -- -
BusyBox v1.00-pre3 (2004.02.26-18:47+0000) multi-call binary
Usage: sed [-nef] pattern [files...]
* Part 2. Continuing from the above, use busybox 1.0.0-pre8
as sed; this fails.
root# ln -s busybox-pre8 /bin/sed-8
root# mv /bin/sed-8 /bin/sed
root# sed --version
This is not GNU sed version 4.0
root# sed --
BusyBox v1.00-pre8 (2004.03.30-02:44+0000) multi-call binary
Usage: sed [-nef] pattern [files...]
root# sh -x 1.sh
+ cd /tmp
+ rm -f ipsec.conf ipsec.conf+
+ cat
+ sed -e /^config setup/a\
nat_traversal=yes ipsec.conf
+ mv -f ipsec.conf+ ipsec.conf
root# cat ipsec.conf
version 2.0
config setup
nat_traversal=yes
klipsdebug=none
plutodebug=none
plutostderrlog=/dev/null
conn %default
keyingtries=1
...
root#
=== reproduction recipe ends here ===
This problem was introduced in 1.0.0-pre4. The problem is that
the command argument parsing code strips leading whitespaces too
aggressively. When running the above example, the piece of code
in question gets "\n\tnat_traversal=yes" as its argument in
cmdstr variable (shown part in the following patch). What it
needs to do at this point is to strip the first newline and
nothing else, but it instead strips all the leading whitespaces
at the beginning of the string, thus losing the tab character.
The following patch fixes this.
Eric Andersen [Wed, 31 Mar 2004 11:30:08 +0000 (11:30 -0000)]
Patch from Thomas Winkler:
ifconfig did not look up hostnames, so
ifconfig lo localhost
would not work, you have to do
ifconfig lo 127.0.0.1
Eric Andersen [Wed, 31 Mar 2004 11:21:24 +0000 (11:21 -0000)]
Patch from Thomas Winkler showing the the system time for each process
when running 'top'
Eric Andersen [Wed, 31 Mar 2004 11:12:51 +0000 (11:12 -0000)]
Patch from Thomas Winkler -- vi -R did not work
Eric Andersen [Tue, 30 Mar 2004 09:33:18 +0000 (09:33 -0000)]
Sigh. what a mess.
Eric Andersen [Tue, 30 Mar 2004 09:21:54 +0000 (09:21 -0000)]
As waldi noticed, checks for the size of an off_t and casting
etc was also redundant and possibly buggy...
Eric Andersen [Tue, 30 Mar 2004 09:13:05 +0000 (09:13 -0000)]
Go ahead and kill off the FDISK_SUPPORT_LARGE_DISKS option,
as it is redundant....
Eric Andersen [Tue, 30 Mar 2004 09:08:58 +0000 (09:08 -0000)]
The fdisk llseek junk was redundant, since both uClibc and glibc
automatically promote lseek and friends to their 64 bit counterparts
when CONFIG_LFS is enabled, since it enables __USE_FILE_OFFSET64
Eric Andersen [Mon, 29 Mar 2004 08:20:08 +0000 (08:20 -0000)]
As noted by Martin Schwenke, the example for find was wrong
Eric Andersen [Sat, 27 Mar 2004 11:35:46 +0000 (11:35 -0000)]
Yet more doc cleanups
Eric Andersen [Sat, 27 Mar 2004 11:26:32 +0000 (11:26 -0000)]
Add missing include files
Eric Andersen [Sat, 27 Mar 2004 10:08:53 +0000 (10:08 -0000)]
passwd and sulogin also need libcrypt, via libbb/pw_encrypt()
Eric Andersen [Sat, 27 Mar 2004 10:02:48 +0000 (10:02 -0000)]
s/fileno\(stdin\)/STDIN_FILENO/g
s/fileno\(stdout\)/STDOUT_FILENO/g
Eric Andersen [Sat, 27 Mar 2004 09:49:57 +0000 (09:49 -0000)]
Vladimir N. Oleynik (vodz) writes:
Ok. Last patch reduce 73 bytes for compensate (and over) your changes ;-)
Comments:
Added cin_fileno variable, auto setted to 0 from BSS and have "eq" stdin
descriptor if isatty(stout)==0, removed global variable FILE* cin.
Removed default setting to terminal_width/terminal_height, this used
only from main() and setted after call get_terminal_width_height()
always correct.
Variable please_display_more_prompt changed to bits logic, have size
reducing.
--w
vodz
Eric Andersen [Sat, 27 Mar 2004 09:40:15 +0000 (09:40 -0000)]
Update docs
Eric Andersen [Tue, 23 Mar 2004 23:15:36 +0000 (23:15 -0000)]
Brian Pomerantz writes:
I've noticed a bug in the "autowidth" feature more, and is probably in
others. The call to the function get_terminal_width_height() passes
in a file descriptor but that file descriptor is never used, instead
the ioctl() is called with 0. In more_main() the call to
get_terminal_width_height() passes 0 as the file descriptor instead of
fileno(cin). This isn't a problem when you more a file (e.g. "more
/etc/passwd") but when you pipe a file to it (e.g. "cat /etc/passwd |
more") the size of the terminal cannot be determined because file
descriptor 0 is not a terminal. The fix is simple, I've attached a
patch for more.c and get_terminal_width_height.c.
BAPper
Robert Griebl [Mon, 22 Mar 2004 21:27:39 +0000 (21:27 -0000)]
Some corrections from vodz:
- Make -u/-l mutually exclusive
- Minor size reduction
Robert Griebl [Sun, 21 Mar 2004 18:01:46 +0000 (18:01 -0000)]
The utc variable was not modified according to the -u/-l command line
parameters.
Eric Andersen [Sat, 20 Mar 2004 00:56:46 +0000 (00:56 -0000)]
Tito noticed a printf that should have been a bb_error_msg.
Manuel Novoa III [Fri, 19 Mar 2004 23:27:08 +0000 (23:27 -0000)]
Oops.. got a bit to aggressive with size optimization and global replace. :-(
Eric Andersen [Fri, 19 Mar 2004 21:00:03 +0000 (21:00 -0000)]
As noted in a patch from Kendrick Hamilton, rmmod was only
half way converted, and still used the old delete_module(),
call rather than a syscall, in one spot.
Eric Andersen [Fri, 19 Mar 2004 12:17:04 +0000 (12:17 -0000)]
Add missing ELFCLASSM for m68k
Eric Andersen [Fri, 19 Mar 2004 12:16:18 +0000 (12:16 -0000)]
Only use R_68K_GOTOFF if it is defined
Eric Andersen [Fri, 19 Mar 2004 10:53:52 +0000 (10:53 -0000)]
Fix broken arg parsing (was not passing pointer to items so p, argc, and argv
were only modified locally). Fix error reporting to properly describe why
ioctls fail.
Eric Andersen [Tue, 16 Mar 2004 05:14:10 +0000 (05:14 -0000)]
Patch from vodz to fix the dynamic vars patch, which I should not
have checked in. Vladimir writes:
Your patch have many problem.
1. You always added + time(). This cannot reset RANDOM=value for debuging
with
replay sequential.
2. Hmm. I examine bash 2.04 source. This pseudorandom generator use low bits
of
counter value. You use high bits. This make bad pseudorandom values after
have
0-value. For example, if + time() do remove, your generator always return 0
after
first generate 0.
3. Memory leak per call. Use ash-unlike unecessary bb_strdup function.
4. Unsupport show last $RANDOM value for "set" and "export" command.
5. Bloat code. Busybox-unlike patch - added unstandart feature as default
hardcode.
Last patch attached.
Erik, why you apply Paul patch with have 5-th point problem? :(
Last patch have ash change xwrite() to fresh libbb/bb_full_write interfase
(haved loop after EINTR).
--w
vodz
Eric Andersen [Mon, 15 Mar 2004 08:46:37 +0000 (08:46 -0000)]
Oops. Using the wrong variable was a rather stupid
thing for me to do.
Eric Andersen [Mon, 15 Mar 2004 08:29:22 +0000 (08:29 -0000)]
Remove trailing whitespace. Update copyright to include 2004.
Manuel Novoa III [Sat, 13 Mar 2004 18:17:37 +0000 (18:17 -0000)]
I redid route.
Eric Andersen [Sat, 13 Mar 2004 08:33:10 +0000 (08:33 -0000)]
Update docs for start_stop_daemon to match reality. Update
the reality a bit to better match debian behavior.
Eric Andersen [Sat, 13 Mar 2004 08:32:14 +0000 (08:32 -0000)]
Fix some doc generation problems
Eric Andersen [Fri, 12 Mar 2004 22:10:40 +0000 (22:10 -0000)]
Hideki IWAMOTO writes:
Current `tr' implementation has a problem, if `plain char' is signed.
[current cvs version]
>echo a | _install/usr/bin/tr '\0' '\377'
Segmentation fault (core dumped)
[patched version]
>echo a | _install/usr/bin/tr '\0' '\377'
a
Eric Andersen [Fri, 12 Mar 2004 22:08:42 +0000 (22:08 -0000)]
Fix some goofy formatting
Eric Andersen [Fri, 12 Mar 2004 22:08:13 +0000 (22:08 -0000)]
Add prototypes for safe_strtol and friends
Eric Andersen [Fri, 12 Mar 2004 22:07:10 +0000 (22:07 -0000)]
Fix awk entry, which was not showing up in BusyBox.txt for some reason
Eric Andersen [Thu, 11 Mar 2004 13:34:24 +0000 (13:34 -0000)]
Paul Mundt, lethal at linux-sh dot org writes:
Here's a follow-up replacement to the patch I sent earlier, this adjusts some
of the semantics of the dynamic variable setting. Namely, dynamic vars can hook
a set handler (which RANDOM uses to adjust the seed). They'll only lose their
dynamic status if they're unset.
I've used the same approach that bash does to come up with the random number,
mostly just for consistency.
For example:
$ echo $RANDOM
13759
$ echo $RANDOM
20057
$ echo $RANDOM
1502
$ export RANDOM=42
$ echo $RANDOM
24179
$ echo $RANDOM
2046
$ unset RANDOM
$ echo $RANDOM
$ export RANDOM=42
$ echo $RANDOM
42
$
Glenn L McGrath [Wed, 10 Mar 2004 10:47:37 +0000 (10:47 -0000)]
Patch from Thomas Frohlich to fix an option ordering bug of mine.
Glenn L McGrath [Wed, 10 Mar 2004 09:58:51 +0000 (09:58 -0000)]
When displaying the size in 1kB blocks round up if an odd number of
blocks
Glenn L McGrath [Wed, 10 Mar 2004 09:10:53 +0000 (09:10 -0000)]
Patch by Seth W. Klein, the -l switch was reversed
Manuel Novoa III [Wed, 10 Mar 2004 07:42:38 +0000 (07:42 -0000)]
In spite of the feature freeze, check in a complete rework of route which
fixes some bugs, adds some error checking, and removes _lots_ of bloat.
Text size on i386...
old new
ipv6 5425 3523
no ipv6 3143 2193
Eric Andersen [Tue, 9 Mar 2004 21:32:57 +0000 (21:32 -0000)]
Note that /proc must be mounted for filesystem type autodetection
to work. Without /proc mounted, one must explicitly specify the
type of every filesystem being mounted.
Eric Andersen [Tue, 9 Mar 2004 21:27:32 +0000 (21:27 -0000)]
David Anders (prpplague) submitted this patch to allow login to work
when the device nodes are symlinks on a read only file system.
Manuel Novoa III [Mon, 8 Mar 2004 10:54:29 +0000 (10:54 -0000)]
Fix broken sort order flags.
Manuel Novoa III [Mon, 8 Mar 2004 05:44:30 +0000 (05:44 -0000)]
My bug. :-(
Eric Andersen [Sat, 6 Mar 2004 22:11:45 +0000 (22:11 -0000)]
Fix/eliminate use of atol
Glenn L McGrath [Sat, 6 Mar 2004 09:12:55 +0000 (09:12 -0000)]
Patch from Matt Kraai to fix debian bug number 231994.
There was an extra blank line preceding the first directory.
Glenn L McGrath [Sat, 6 Mar 2004 07:38:27 +0000 (07:38 -0000)]
Woops, how did that get in there
Manuel Novoa III [Sat, 6 Mar 2004 00:32:54 +0000 (00:32 -0000)]
Don't build these support functions for uClibc, as it always supplies
versions.
Glenn L McGrath [Fri, 5 Mar 2004 15:52:57 +0000 (15:52 -0000)]
Patch from John Powers, adds multicast (rfc2090) and timeout (rfc2349)
options
Glenn L McGrath [Fri, 5 Mar 2004 14:35:00 +0000 (14:35 -0000)]
Patch from duane no-name, optionally request additional items
Glenn L McGrath [Fri, 5 Mar 2004 14:25:49 +0000 (14:25 -0000)]
Patch by Andrew Victor,
In arpping.h, fix structure alignment of "struct arpMsg".
GCC can insert padding in the structure which causes udhcpd to send an
invalid ARP packet on the network. It will then not receive a valid
reply, which can cause it to assign an IP address that's already in use
on the network.
(With kernels before 2.4.20, the "struct ethhdr" in linux/if_ether.h
wasn't marked as packed. This is also an issue if your toolchain was
built with a pre-2.4.20 kernel).
Glenn L McGrath [Fri, 5 Mar 2004 14:23:16 +0000 (14:23 -0000)]
Fix a typo, patch by Andrew Victor
Glenn L McGrath [Fri, 5 Mar 2004 13:23:40 +0000 (13:23 -0000)]
Patch from Tony J. White to allow paths to be configured
Glenn L McGrath [Fri, 5 Mar 2004 13:11:05 +0000 (13:11 -0000)]
Patch by Denis Vlasenko to add forground support.
Glenn L McGrath [Fri, 5 Mar 2004 13:04:39 +0000 (13:04 -0000)]
Fix debugging output, patch by Hideki IWAMOTO
Glenn L McGrath [Fri, 5 Mar 2004 12:55:30 +0000 (12:55 -0000)]
Patch by Felipe Kellermann to fix a compiler compatability problem
Glenn L McGrath [Fri, 5 Mar 2004 09:38:16 +0000 (09:38 -0000)]
Patch from Steven Scholz to fix compiler warnings
Glenn L McGrath [Fri, 5 Mar 2004 07:26:28 +0000 (07:26 -0000)]
New applet, eject, by Peter Willis
Glenn L McGrath [Fri, 5 Mar 2004 06:47:25 +0000 (06:47 -0000)]
Close bracket in description from Peter Willis's eject applet
Glenn L McGrath [Fri, 5 Mar 2004 05:47:19 +0000 (05:47 -0000)]
Patch from Vernon Sauder.
The off_t type is not a consistent size; it depends on the kernel options
(something about large file support). Therefore, the format string for
printing an address is not always the same.
Glenn L McGrath [Wed, 3 Mar 2004 21:12:16 +0000 (21:12 -0000)]
Fix a compile error identiefied by Steven Scholz.
Declare variables first for compatability.
Glenn L McGrath [Mon, 1 Mar 2004 08:32:49 +0000 (08:32 -0000)]
Check file has execute permission for the current user, minor formating
Glenn L McGrath [Thu, 26 Feb 2004 07:47:20 +0000 (07:47 -0000)]
Quick fix for tftp truncation bug
Glenn L McGrath [Wed, 25 Feb 2004 10:35:55 +0000 (10:35 -0000)]
Patch from Denis Dowling to fix a ocuple of usage entries
Glenn L McGrath [Wed, 25 Feb 2004 09:30:06 +0000 (09:30 -0000)]
Fix option handling, -i or -t must be given, if both ignore the -t.
Use bb_getopt_ulflags.
Eric Andersen [Tue, 24 Feb 2004 07:28:38 +0000 (07:28 -0000)]
Joe.C, joe at numa dot com dot tw writes:
Hi,
When downloading files over slow network (e.g. wireless/
internet) using IE, sometimes it will stop downloading and
show error message 'connection closed' when the download
is almost complete. This is because IE can't handle server
close connection properly.
Apache http_main.c fix this problem by close the connection
after client close the connection. This patch do exactly the
same thing. Please consider include this patch.
Joe.C
Eric Andersen [Mon, 23 Feb 2004 09:14:07 +0000 (09:14 -0000)]
Prepare for release
Glenn L McGrath [Mon, 23 Feb 2004 08:11:07 +0000 (08:11 -0000)]
bb_full_fd_action was incorrectly returning an error message causing
major breaking.
Eric Andersen [Sun, 22 Feb 2004 12:27:04 +0000 (12:27 -0000)]
Bump up version in preparation for -pre8
Eric Andersen [Sun, 22 Feb 2004 12:25:47 +0000 (12:25 -0000)]
Fernando Silveira writes:
Hi,
Well, I made this patch a long time ago (08/2002) because it was a
need of a project, but had no time to send it to you. It adds support
to `autologin' option of the telnet protocol. It has been used since
made with busybox 0.60.3 at production and I had no problems with it.
I have ported it to the HEAD revision of the CVS server (
20040211) and
I hope you enjoy and apply it to the official sources. :)
Thanks a lot!
Glenn L McGrath [Sun, 22 Feb 2004 12:17:33 +0000 (12:17 -0000)]
Fix from Paul Kortekaas for syslog -C option, size should be in kB.
Glenn L McGrath [Sun, 22 Feb 2004 11:55:09 +0000 (11:55 -0000)]
Patch from Dmitry Zakharov, this line was missedfrom the last patch
Eric Andersen [Sun, 22 Feb 2004 11:46:49 +0000 (11:46 -0000)]
For the time being, revert the changes for detecting copying
a directory into itself. It is harder to do this correctly
than it appears. Not trying at all seems a better compromise
for the time being, untill we can implement this correctly.
Glenn L McGrath [Sun, 22 Feb 2004 11:35:13 +0000 (11:35 -0000)]
Patch from Chris Larson (kergoth), to allow multiple directores to be
unmounted at once.
Glenn L McGrath [Sun, 22 Feb 2004 11:25:13 +0000 (11:25 -0000)]
Patch from Vodz, cleanup memory usage, send strdup error messages to
syslog.
Glenn L McGrath [Sun, 22 Feb 2004 11:13:28 +0000 (11:13 -0000)]
Vodz. last_patch_128
- declare applet_using as static from applets.c
- small correction to cmdedit,
previous version cleared history after Ctrl-C
- small spelling correction (by Friedrich Lobenstock)
Glenn L McGrath [Sun, 22 Feb 2004 09:45:57 +0000 (09:45 -0000)]
Patch from James Zhu, telnetd window resizing support.
Glenn L McGrath [Sun, 22 Feb 2004 09:11:33 +0000 (09:11 -0000)]
Use bb_getopt_ulflags, marginal saving, better argument checking.
Glenn L McGrath [Sun, 22 Feb 2004 08:33:37 +0000 (08:33 -0000)]
Use /var/lib/hwclock for adjtime, its really a state file rather than a
config file, so it should be in /etc, FHS mentions it also.