Command docs: fix links to other sections (sometimes in other manuals)

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)

Command docs: fix up command references

Almost all OpenSSL commands are in reality 'openssl cmd', so make sure
they are refered to like that and not just as the sub-command.

Self-references are avoided as much as is possible, and replaced with
"this command".  In some cases, we even avoid that with a slight
rewrite of the sentence or paragrah they were in.  However, in the few
cases where a self-reference is still admissible, they are done in
bold, i.e. openssl-speed.pod references itself like this:

    B<openssl speed>

References to other commands are done as manual links, i.e. CA.pl.pod
references 'openssl req' like this: L<openssl-req(1)>

Some commands are examples rather than references; we enclose those in
C<>.

While we are it, we abolish "utility", replacing it with "command", or
remove it entirely in some cases.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)

Command docs: replacables are in italics, options always start with a dash

Quite a lot of replacables were still bold, and some options were
mentioned without a beginning dash.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)

Command docs: remove ellipses for '-rand'

Ellipses were used to express that the '-rand' value can specify
multiple files, like this:

    B<-rand> I<file...>

Because there are conventions around ellipses, this becomes confusing,
because '-rand file...' is normally intepreted to mean that
'-rand file1 file2 file3' would be processed as three randomness
files, which makes no sense.

Rather than making things complicated with more elaborate syntax, we
change it to:

    B<-rand> I<files>

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)

Command docs: fix ellipses, the easy cases

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)

Fix CMP test error on platforms which set OPENSSL_FUNC to '(unknown function)'

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10119)

Add rc2 ciphers to default provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9991)

Move cipher ctx 'original iv' parameter into the provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10026)

Add documentation for PEM_{read,write}_bio_Parameters()

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10113)

Fix typo in flag name

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10110)

Fix no-autoerrinit

Don't run the test_CTX_print_errors test test in test_cmp_ctx if
no-autoerrinit has been configured.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10091)

Send bad_record_mac instead of decryption_failed

The decryption failed alert was deprecated a long time ago. It can
provide an attacker too much information to be able to distinguish between
MAC failures and decryption failures and can lead to oracle attacks.
Instead we should always use the bad_record_mac alert for these issues.
This fixes one instance that still exists. It does not represent a
security issue in this case because it is only ever sent if the record is
publicly invalid, i.e. we have detected it is invalid without using any
secret material.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10093)

Support SM2 in apps/speed

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10053)

EVP_{CIPHER,MD}_CTX_ctrl(): make sure to return 0 or 1

Even thought the underlying calls might return something other than 0
or 1, EVP_CIPHER_CTX_ctrl() and EVP_MD_CTX_ctrl() were made to only
return those values regardless.  That behaviour was recently lost, so
we need to restore it.

Fixes #10106

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10108)

Deprecate NCONF_WIN32() function

Extensive documentation added in HISTORY section in doc/man5/config.pod

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9578)

Also mention -- flag and ignore if undocumented

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10077)

Fix typo in comment

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10105)

Add missing help text for some options

Fixes: #9952

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/9989)

RC4 is not a block cipher

RC4 is a stream cipher therefore EVP_CIPHER_CTX_block_size() should
return 1.

This fixes a test failure in ssl_test_old when enable-weak-ssl-ciphers
has been configured.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10090)

Fix L<EVP_KDF-derive> to L<EVP_DEF_derive>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10096)

Move MD5-SHA1 digest completely to the default provider

This leaves minimal implementations of EVP_md5_sha1, which is now only
there to provide a name for implicit fetches.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9076)

Remove unused fields in method store structure.

The random bit caching was a residue of earlier code and isn't used any more.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10089)

Move all SHA digests completely to the default provider

This leaves minimal implementations of EVP_sha* and EVP_shake*, which
is now only there to provide a name for implicit fetches.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10059)

Rename "private" file, doc doc changes in CHANGES

Use err() for find-doc-nits -e output
Doing this meant we could remove the -s flag, so we do so; move
option/help stuff to top of script.
Add a CHANGES entry.
Rename missing to other.syms

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10039)

Adapt existing providers to posibly have name lists

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)

Replumbing: make it possible for providers to specify multiple names

This modifies the treatment of algorithm name strings to allow
multiple names separated with colons.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)

'init_buf' memory can be freed when DTLS is used over SCTP (not over UDP).

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9653)

rsa: replace magic number '11' by RSA_PKCS1_PADDING_SIZE

Suggested by Matt Hart

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10084)

Don't follow legacy path if ctx->pctx is set

EVP_DigestInit_ex forced following of the legacy path if ctx->pctx is
set (meaning we've actually been called via EVP_DigestSignInit_ex).

There is some code in the legacy path that calls the
EVP_PKEY_CTRL_DIGESTINIT ctrl on the pctx. Not going down the legacy path
if ctx->pctx is set means that ctrl message will neve get sent. However,
it turns out that all algs that understand that ctrl also set the
EVP_MD_CTX_FLAG_NO_INIT flag which forces legacy anyway. Therefore the
ctx->pctx check is not required and can be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10082)

Fix no-err

Skip the test_CTX_print_errors in cmp_ctx_test if no-err has been
configured.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10071)

Free a fetched digest during EVP_MD_CTX_reset() not EVP_MD_free()

Otherwise a mem leak can occur since EVP_MD_free() calls
EVP_MD_CTX_reset() which then clears the contents of the ctx.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Don't call EVP_MD_CTX_reset during EVP_DigestFinal

This resets the fields of the EVP_MD_CTX and means we can no longer
make calls using the EVP_MD_CTX, such as to query parameters.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Add a test for the newly added md params code

Previous commits added code for routing md related parameters via and
EVP_SIGNATURE implementation during a DigestSign operation. This adds a
test to make sure this works as expected.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Update EVP_MD_CTX_get_params() et al to be EVP_DigestSign*() aware

If doing an EVP_DigestSign*() or EVP_DigestVerify*() operation we use
the embedded pctx for communication with the provider. Any MD params need
to use that ctx instead.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Update documentation

Add documentation for EVP_DigestSignInit_ex() and
EVP_DigestVerifyInit_ex(), and add an appropriate CHANGES entry.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Ensure we look at EVP_MD_CTX_FLAG_KEEP_PKEY_CTX in non-legacy code

This flag is still relevant even for non-legacy code so we should check
it where appropriate.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Add EVP_DigestSign/EVP_DigestVerify support for DSA

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Add the provider function signatures for DigestSign*

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)

Add rc5 ciphers to default provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10006)

Add arm64 in test matrix on TravisCI.

Change-Id: I5d2b729699cfd8e80c3df17db4a9d2edcbf64454

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10046)

doc: EVP_DigestInit clears all flags

Mention that EVP_DigestInit() also clears all flags.

Fixes: 10031
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10032)

Fix errors found by new find-doc-nits

Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)

Add wordlist from man7.org

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)

Do not print extensions in Certificate message for TLS1.2 and lower

According to RFC8446 CertificateEntry in Certificate message contains
extensions that were not present in the Certificate message in RFC5246.

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9994)

Fix Coverity issues

CID 1453954 & 1453955

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9977)

Fix long name of some Microsoft objects

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10029)

doc/man1: fix malformed options

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10073)

util/find-doc-nits: more precise option and function name checker

The checks for our uses of 'B<' and 'I<' for options, and possibly
function names, was over-reaching quite a bit.

So we fine-tune it a bit:

- by only checking for options in man1 pages, and only in SYNOPSIS
  and *OPTIONS sections.
- by only checking for function names in man3 pages.

The man1 option checker has the additional check that options found in
*OPTIONS are also found in SYNOPSIS andd vice versa.

In all cases, this also handles options and function names with
additional markup, such as 'B<-I<cipher>>' and 'B<sk_I<TYPE>_push>'.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10073)

Update "missing documentation" function lists

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10064)

Add '=for comment ifdef' to pod pages

Make find-doc-nits understand that
        =for comment ifdef ssl3 ...
in a POD page means that the "-ssl3" flag might be ifdef'd out in the
local environment, and not to complain about it.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9974)

Make EVP_CIPHER_is_a() work with legacy cipher implementations too

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10008)

Remove EVP_CIPH_FLAG_DEFAULT_ASN1 from all provided implementations

Since that flag has lost its relevance, don't use it any more.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10008)

Adapt EVP_CIPHER_{param_to_asn1,asn1_to_param} for use with provider.

So far, these two funtions have depended on legacy EVP_CIPHER
implementations to be able to do their work.  This change adapts them
to work with provided implementations as well, in one of two possible
ways:

1.  If the implementation's set_asn1_parameters or get_asn1_parameters
    function pointers are non-NULL, this is a legacy implementation,
    and that function is called.
2.  Otherwise, if the cipher doesn't have EVP_CIPH_FLAG_CUSTOM_ASN1
    set, the default AlgorithmIdentifier parameter code in libcrypto
    is executed.
3.  Otherwise, if the cipher is a provided implementation, the ASN1
    type structure is converted to a DER blob which is then passed to
    the implementation as a parameter (param_to_asn1) or the DER blob
    is retrieved from the implementation as a parameter and converted
    locally to a ASN1_TYPE (asn1_to_param).

With this, the old flag EVP_CIPH_FLAG_DEFAULT_ASN1 has become
irrelevant and is simply ignored.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10008)

Make manuals with TYPE conform with man-pages(7)

Details from man-pages(7) that are used:

    Formatting conventions for manual pages describing functions

        ...
        Variable names should, like argument names, be specified in italics.
        ...

    Formatting conventions (general)

        ...
        Special macros, which are usually in uppercase, are in bold.
        Exception: don't boldface NULL.
        ...

Furthermore, for TYPE used as a placeholder for types and correponding
part of function names, we extrapolate that it's both a type and a
variable, and should therefore be bold (typical for types and function
names) and italic (typical for variables).  POD processors don'e know
this, so we have to help them along.  Therefore:

   SPARSE_ARRAY_OF(TYPE)        => B<SPARSE_ARRAY_OF>(B<I<TYPE>>)
   ossl_sa_TYPE_num()           => B<ossl_sa_I<TYPE>_num>()
   TYPE                         => B<I<TYPE>>

There are some other less typical uses where one simply has to give
formatting some extra though.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10041)

Make ASN1 manuals conform with man-pages(7)

Details from man-pages(7) that are used:

    Formatting conventions for manual pages describing functions

        ...
        Variable names should, like argument names, be specified in italics.
        ...

    Formatting conventions (general)

        ...
        Special macros, which are usually in uppercase, are in bold.
        Exception: don't boldface NULL.
        ...

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10042)

Consistent formatting of flags with args

For documentation of all commands with "-flag arg" format them
consistently: "B<-flag> I<arg>", except when arg is literal
(for example "B<-inform> B<PEM>|B<DER>")
Update find-doc-nits to complain if badly formatted strings are found.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10022)

Add defines for __NR_getrandom for all Linux architectures

Fixes: #10015

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
GH: #10044

 Make ASYNC manuals conform with man-pages(7)

 Details from man-pages(7) that are used:

     Formatting conventions for manual pages describing functions

         ...
         Variable names should, like argument names, be specified in italics.
         ...

     Formatting conventions (general)

         ...
         Special macros, which are usually in uppercase, are in bold.
         Exception: don't boldface NULL.
         ...

Additionally, expanded some lists to make better use of POD formatting.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10043)

Correct the function names in SSL_CTX_set_stateless_cookie_generate_cb.pod

Although the synopsis used the correct function names, the description did
not. Also the description of the equivalent DTLSv1_listen() callbacks was
missing, so these have been added.

Fixes #10030

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10033)

Fix a bundle of mischecks of return values

Several EVP_PKEY_xxxx functions return 0 and a negative value for
indicating errors. Some places call these functions with a zero return
value check only, which misses the check for the negative scenarios.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10055)

Make default values by ERR_get_error_all() and friends more consistent

Unset data defaults to the empty string ("") or 0.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9948)

Fix a return value bug in apps/speed.c

Those functions returns less than and equal to 0 to indicate an error
occured.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10054)

Consistent naming for context gettable param queries .

All instances of EVP_*_CTX_gettable_params functions have been renamed
to EVP_*_gettable_ctx_params.  Except for the EVP_MD ones which were changed
already.

These functions do not take EVP_*_CTX arguments so their prior naming was
misleading.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10052)

Make relevant tests more sensitive to 'no-fips'

This applies to test/recipes/30-test_evp.t and
test/recipes/30-test_evp_fetch_prov.t.

Additionally, we make test/recipes/30-test_evp_fetch_prov.t data
driven, to make test number planning more automated, and to separate
what is unique from what is common to all the test cases.

[extended tests]

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10047)

Fix a document description in apps/req

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)

Fix a double free issue when signing SM2 cert

If the SM2 ID value has not been passed correctly when signing an SM2
certificate/certificate request, a double free occurs. For instance:

  openssl req -x509 ... -sm2-id 1234567812345678

The '-sm2-id' should not be used in this scenario, while the '-sigopt' is
the correct one to use. Documentation has also been updated to make the
options more clear.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)

Add util/fix-includes script

This script contains all adjustments to header files which were made
during the reorganization of the header files. It is meant as an aid
for other contributors which encounter preprocessor #include errors
after rebasing over this pull request. Simply running

  util/fix-includes

from the root of the source directory should hopefully fix the problem.

Note: such #include errors are expected only for pull requests which
add a lot of new code, in particular new compilation modules.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Add legacy include guards to public header files

For every public header file, the old include guard definition needs
to be added in addition to the new one

include/openssl/file.h:

    #ifndef OPENSSL_FILE_H
    # define OPENSSL_FILE_H
    # pragma once

    # include <openssl/macros.h>
    # if !OPENSSL_API_3
    #  define HEADER_FILE_H
    # endif
    ...

This is going to ensure that applications which use the old include guards
externally, for example like this

    #ifndef HEADER_FILE_H
    # include <openssl/file.h>
    #endif

will not fail to compile.

In addition to the legacy guard, the public header files also receive a
'# pragma once' directive.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Fix header file include guard names

Make the include guards consistent by renaming them systematically according
to the naming conventions below

For the public header files (in the 'include/openssl' directory), the guard
names try to match the path specified in the include directives, with
all letters converted to upper case and '/' and '.' replaced by '_'. For the
private header files files, an extra 'OSSL_' is added as prefix.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Reorganize public header files (part 2)

Add an <openssl/ossl_typ.h> compatibility header.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Reorganize public header files (part 1)

Rename <openssl/ossl_typ.h> to <openssl/types.h>.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Reorganize local header files

Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like

  '*_lcl.h', '*_local.h', or '*_int.h'

This commit changes the different suffixes to '*_local.h' uniformly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Reorganize private crypto header files

Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:

While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.

To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:

  #include "internal/file.h"      # located in 'include/internal'
  #include "internal/file_int.h"  # located in 'crypto/include/internal'

This commit moves the private crypto headers from

  'crypto/include/internal'  to  'include/crypto'

As a result, the include directives become unambiguous

  #include "internal/file.h"       # located in 'include/internal'
  #include "crypto/file.h"         # located in 'include/crypto'

hence the superfluous '_int.h' suffixes can be stripped.

The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Add legacy include guard manually to opensslconf.h.in

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)

Funtion name with variable part in doc/man7/ and doc/internal/man3/

We have a few pages where part of function names can be considered
variable.  There are no normative guidelines for such a case, but if
we draw from the formatting convention of variable and argument names,
we can draw the conclusion that this variable part should be italized,
within already given conventions.  In other words, we need to help the
POD processor along in cases like these:

    SPARSE_ARRAY_OF(TYPE)
    ossl_sa_TYPE_num()

These need explicit formatting:

    B<SPARSE_ARRAY_OF>(I<TYPE>)
    B<ossl_sa_I<TYPE>_num>()

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)

Make doc/man7/ and doc/internal/man3/ conform with man-pages(7)

It's all in the details, from man-pages(7):

    Formatting conventions for manual pages describing functions

        ...
        Variable names should, like argument names, be specified in italics.
        ...

    Formatting conventions (general)

        ...
        Special macros, which are usually in uppercase, are in bold.
        Exception: don't boldface NULL.
        ...

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)

[KDF] Add KBKDF implementation for counter-mode HMAC

Implement SP800-108 section 5.1 with HMAC intended for use in Kerberos.
Add test vectors from RFC 8009.

Adds error codes PROV_R_INVALID_MAC and PROV_R_MISSING_MAC.

Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9924)

OSSL_PARAM functions: change to allow the data field to be NULL

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10025)

OSSL_PARAM.pod: document the mechanism to figure out buffer sizes

When requesting parameters, it's acceptable to make a first pass with
the |data| field of some parameters being NULL.  That can be used to
help the requestor to figure out dynamically what buffer size is
needed.  For variable size parameters, there's no other way to find
out.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10025)

Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
    Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)

    CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
        Adds extensive man pages and tests.  Integration into build scripts.

    Incremental pull request based on OpenSSL commit 8869ad4a39f of 2019-04-02

    4th chunk: CMP context/parameters and utilities
    in crypto/cmp/cmp_ctx.c, crypto/cmp/cmp_util.c, and related files

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9107)

Reformat param description lines

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10024)

Make OSSL_PARAM descriptions uniformly formatted.

  =item B<MACRO> ("name") <type>

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10024)

When building of modules is disabled, build the legacy provider into libcrypto

This makes the legacy provider available regardless of building conditions.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9637)

Configure, build.info: make it possible to use variables in indexes

That will make it possible to assign different goals for translation
units depending on need.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9637)

Ensure man1 POD files start with openssl-

Commit b6b66573 (PR #9679) renamed most POD files. This change causes
find-doc-nits to flag misnamed files.
Also fix the two misnamed files that it found.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10000)

Missing else in cipher_hw_aes_ocb_generic_initkey

This came from commit 3837c202 "Add aes_ocb cipher to providers". It
causes the default non-hardware accelerated AES implementation to be
used even if HWAES_CAPABLE is set. Affects all platforms except X86 and
SPARC.

Patch by: Nick Gasson <Nick.Gasson@arm.com>
Change-Id: I26001a3a922ff23f6090fdcefefaecf68e92e2a6

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10012)

Use OSSL_PARAM types.  Limits are explained in the description where appropriate.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)

Use OSSL_PARAM types.  Limits are explained in the description where appropriate.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)

KDF section 3 clean up

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)

Use OSSL_PARAM types for MAC documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)

Use OSSL_PARAM types for KDF documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)

s390x assembly pack: accelerate X25519, X448, Ed25519 and Ed448

using PCC and KDSA instructions.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)

s390x assembly pack: cleanse only sensitive fields

of instruction parameter blocks.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)

s390x assembly pack: fix OPENSSL_s390xcap z15 cpu mask

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)

s390x assembly pack: fix msa3 stfle bit detection

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)

Make EVP_MD_CTX_[gettable|settable]_params() take an EVP_MD_CTX

EVP_MD_CTX_gettable_params() and EVP_MD_CTX_settable_params() were
confusingly named because they did not take an EVP_MD_CTX parameter.

In addition we add the functions EVP_MD_gettable_ctx_params() and
EVP_MD_settable_ctx_params() which do the same thing but are passed
an EVP_MD object instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9998)

Remove the engine parameter from the provider MAC documentations

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9971)

Remove the engine parameter from the individual MAC documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9971)

Remove engine param from EVP_KDF and EVP_MAC documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9971)

Remove engine param from the settable list

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9971)