Anatolij Gustschin [Thu, 14 Feb 2008 23:13:20 +0000 (00:13 +0100)]
Fix compile warning on lib_ppc/board.c
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Thu, 14 Feb 2008 17:22:04 +0000 (18:22 +0100)]
Add Radeon Mobility 9200 pci device id to the radeon driver
This patch extends PCI device id table of the
radeon driver so that the driver will also support
Radeon Mobility 9200 (M9+) based boards.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Thu, 14 Feb 2008 17:19:50 +0000 (18:19 +0100)]
Extend ATI Radeon driver to support more video modes
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 10 Feb 2008 16:05:20 +0000 (17:05 +0100)]
xsengine: fix typo and few coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Guennadi Liakhovetski [Fri, 8 Feb 2008 20:25:58 +0000 (21:25 +0100)]
Fix wrong memory limit calculation in memory-test
If the length of the memory address range passed to the "mtest" command is
not of the form 2^x - 1, not all address lines are tested. This bug is
inherited from the original software at
http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
this.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:27:11 +0000 (00:27 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:26:52 +0000 (00:26 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Conflicts:
common/cmd_reginfo.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:22:49 +0000 (00:22 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:22:37 +0000 (00:22 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Thu, 14 Feb 2008 23:16:32 +0000 (00:16 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:16:26 +0000 (00:16 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-sh
Wolfgang Denk [Thu, 14 Feb 2008 23:14:36 +0000 (00:14 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:14:26 +0000 (00:14 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-avr32
Wolfgang Denk [Thu, 14 Feb 2008 23:13:09 +0000 (00:13 +0100)]
Merge ../custodians
Wolfgang Denk [Thu, 14 Feb 2008 23:12:52 +0000 (00:12 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Wolfgang Denk [Thu, 14 Feb 2008 23:11:39 +0000 (00:11 +0100)]
Coding STyle cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 23:06:18 +0000 (00:06 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-blackfin
Conflicts:
Makefile
doc/README.standalone
Signed-off-by: Wolfgang Denk <wd@denx.de>
Nobuhiro Iwamatsu [Tue, 5 Feb 2008 04:30:43 +0000 (13:30 +0900)]
sh: Fix register address of SH7722
The address of SH7722 is wrong by old document.
This patch fixes this problem.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Mike Frysinger [Mon, 4 Feb 2008 22:44:23 +0000 (17:44 -0500)]
only update version header as needed
Constantly rebuilding the version header will force useless relinking, so we
simply need to compare the new header with the existing one before updating
it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 28 Jan 2008 10:56:19 +0000 (05:56 -0500)]
Do not specify a CROSS_COMPILE default when executing size
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Guennadi Liakhovetski [Wed, 13 Feb 2008 10:19:19 +0000 (11:19 +0100)]
Fix return value of mtest when CFG_ALT_MEMTEST set
Fix a missing return statement from a non-void function.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Timur Tabi [Wed, 9 Jan 2008 20:35:26 +0000 (14:35 -0600)]
85xx, 86xx: Determine I2C clock frequencies and store in global_data
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
Signed-off-by: Timur Tabi <timur@freescale.com>
Wolfgang Denk [Thu, 14 Feb 2008 22:18:01 +0000 (23:18 +0100)]
TQM834x: clean up configuration
Get board name consistent with Linux and elsewhere;
get rid of local network definitions etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 14 Feb 2008 07:02:12 +0000 (08:02 +0100)]
TFTP: fix search of ':' in BootFile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Thu, 14 Feb 2008 21:46:55 +0000 (22:46 +0100)]
Coding style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 14 Feb 2008 21:43:22 +0000 (22:43 +0100)]
PPC: Use r2 instead of r29 as global data pointer
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.
Use r2 instead.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Uwe Kleine-König [Wed, 30 Jan 2008 08:08:49 +0000 (09:08 +0100)]
ARM: make the machid configurable via the environment
If the variable "machid" exists, let do_bootm_linux use that instead
of bd->bi_arch_number.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Vlad Lungu [Wed, 23 Jan 2008 14:34:46 +0000 (16:34 +0200)]
Use #ifdef CONFIG_FSLDMAFEC
MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
fails
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Shinya Kuribayashi [Sat, 19 Jan 2008 01:25:59 +0000 (10:25 +0900)]
common/miiphyutil.c: Cleanup MII_DEBUG and debug()
Current MII_DEBUG is confusing in two ways. One is useless define-then-
undef at the top of the file. The other is there is only one debug() in
this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
While there are many useful printf()/puts() debug codes, but they are for
DEBUG, not for MII_DEBUG.
This patch tries to put them all together into MII_DEBUG and debug().
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Kyungmin Park [Thu, 17 Jan 2008 07:43:25 +0000 (16:43 +0900)]
OneNAND Initial Program Loader (IPL) support
This patch enables the OneNAND boot within U-Boot.
Before this work, we used another OneNAND IPL called X-Loader based
on open source. With this work, we can build the oneboot.bin image
without other program.
The build sequence is simple.
First, it compiles the u-boot.bin
Second, it compiles OneNAND IPL
Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
The mechanism is similar with NAND boot except it boots from itself.
Another thing is that you can only use the OneNAND IPL only to work
other bootloader such as RedBoot and so on.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Andy Fleming [Wed, 16 Jan 2008 19:06:59 +0000 (13:06 -0600)]
Fix CONFIG_MMC usage in fat code
A #if statement in fat.c depended on CONFIG_MMC, instead of
defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
as "1" rather than just defined. Now it's better.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Rafal Jaworowski [Tue, 15 Jan 2008 11:52:31 +0000 (12:52 +0100)]
ppc: Refactor cache routines, so there is only one common set.
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Jon Loeliger [Thu, 14 Feb 2008 20:07:21 +0000 (14:07 -0600)]
Merge commit 'wd/master'
Jon Loeliger [Wed, 23 Jan 2008 21:55:02 +0000 (15:55 -0600)]
86xx: Fix compilation warning in sys_eprom.c
sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Andy Fleming [Thu, 14 Feb 2008 16:11:14 +0000 (10:11 -0600)]
Merge branch 'denx'
Stefan Roese [Thu, 14 Feb 2008 10:46:07 +0000 (11:46 +0100)]
Merge branch 'for-1.3.2'
Niklaus Giger [Tue, 5 Feb 2008 09:26:42 +0000 (10:26 +0100)]
ppc4xx: HCU4/5. Fix make O=../xx
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Larry Johnson [Tue, 22 Jan 2008 13:51:59 +0000 (08:51 -0500)]
ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
Signed-off-by: Larry Johnson <lrj@acm.org>
Andy Fleming [Thu, 14 Feb 2008 00:36:27 +0000 (18:36 -0600)]
Merge branch 'denx'
Hiroshi Ito [Thu, 31 Jan 2008 09:35:04 +0000 (18:35 +0900)]
NFS Timeout with large files.
Retry to send NFS packet before reaching timeout.
Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
Johannes Stezenbach [Mon, 28 Jan 2008 23:11:25 +0000 (00:11 +0100)]
Add dependencies to avoid race conditions with parallel make.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Mike Frysinger [Mon, 28 Jan 2008 10:46:01 +0000 (05:46 -0500)]
Mark board_init_[fr] as noreturn
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 28 Jan 2008 10:28:50 +0000 (05:28 -0500)]
Only use TEXT_BASE if defined by the board
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 25 Jan 2008 06:54:47 +0000 (07:54 +0100)]
Fix remaining CONFIG_COMMANDS
update comments
Fix coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Niklaus Giger [Mon, 21 Jan 2008 15:46:00 +0000 (16:46 +0100)]
Add *~ to .gitignore
One should never add a backup file ending in with ~ to the git repository.
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Kumar Gala [Thu, 17 Jan 2008 06:02:10 +0000 (00:02 -0600)]
Remove duplicate defines for ARRAY_SIZE
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Stelian Pop [Mon, 14 Jan 2008 21:08:14 +0000 (22:08 +0100)]
Fix incorrect address test in AT91F_DataflashSelect().
Signed-off-by: Stelian Pop <stelian@popies.net>
Kumar Gala [Wed, 13 Feb 2008 21:09:58 +0000 (15:09 -0600)]
Fix building of fdt_support.c if DEBUG set
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jon Loeliger [Tue, 12 Feb 2008 20:53:28 +0000 (14:53 -0600)]
Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
These replace direct structure references for IMMR sections.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Wed, 13 Feb 2008 22:03:20 +0000 (16:03 -0600)]
Merge commit 'wd/master'
Wolfgang Denk [Mon, 11 Feb 2008 23:56:25 +0000 (00:56 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Mon, 11 Feb 2008 23:53:56 +0000 (00:53 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Wolfgang Denk [Mon, 11 Feb 2008 23:51:05 +0000 (00:51 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Mon, 11 Feb 2008 23:45:06 +0000 (00:45 +0100)]
Get rid of "#undef DEBUG" from board config files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Timur Tabi [Tue, 15 Jan 2008 23:09:41 +0000 (17:09 -0600)]
Remove #undef DEBUG from MPC83xx board header files
Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
The inclusion of this line makes it impossible to enable debug code in
other source files, because "#define DEBUG" typically needs to be defined
before any header files are included.
Signed-off-by: Timur Tabi <timur@freescale.com>
Kumar Gala [Thu, 17 Jan 2008 14:25:45 +0000 (08:25 -0600)]
QE: Move FDT support into a common file
Move the flat device tree setup for QE related devices into
a common file shared between 83xx & 85xx platforms that have QE's.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Grzegorz Bernacki [Mon, 28 Jan 2008 09:15:02 +0000 (10:15 +0100)]
ADS5121e: DDR2 init/timing update.
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
John Rigby [Wed, 30 Jan 2008 20:36:57 +0000 (13:36 -0700)]
Device tree updates
Changes to match 5121 device tree going mainline in 2.6.25.
Change OF_SOC from "soc5121" to plain "soc".
Remove unneeded "ref-frequency" fixups.
Remove "address" enetaddr fixup.
Add bus-frequency fixup for old OF_SOC so old
kernels with old device trees will work with new
u-boot with 66MHz IPS clock
Signed-off-by: John Rigby <jrigby@freescale.com>
John Rigby [Wed, 30 Jan 2008 20:36:56 +0000 (13:36 -0700)]
Change IPS freq to 66MHz
Recommended frequency is 66MHz
Change divider from 4 to 3.
Signed-off-by: John Rigby <jrigby@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 14 Jan 2008 21:38:55 +0000 (22:38 +0100)]
xsengine: rename board_post_init to board_late_init
missing migration from "Cleanup of some init functions"
in
c837dcb1a316745092567bfe4fb266d0941884ff
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Larry Johnson [Sun, 13 Jan 2008 04:35:33 +0000 (23:35 -0500)]
Add attribute POST_PREREL to ECC memory POST
Signed-off-by: Larry Johnson <lrj@acm.org>
Kumar Gala [Thu, 17 Jan 2008 14:25:45 +0000 (08:25 -0600)]
QE: Move FDT support into a common file
Move the flat device tree setup for QE related devices into
a common file shared between 83xx & 85xx platforms that have QE's.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haavard Skinnemoen [Wed, 23 Jan 2008 16:20:14 +0000 (17:20 +0100)]
AVR32: Make SDRAM refresh rate configurable
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.
Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.
Big thanks to Gerhard Berghofer for pointing out this issue.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 19 Apr 2007 08:10:11 +0000 (10:10 +0200)]
ATSTK1000: Fix potential flash programming bug
The (now obsolete) atngw100 flash programming code was having problems
programming the onboard at49bv642 chip. The atstk1000 flash
programming code may have the same bug, so import fix for this problem
from the AVR32 Linux BSP.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 22 Nov 2007 16:04:13 +0000 (17:04 +0100)]
ATSTK1004: Fix comment about default load address
The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
wouldn't have worked anyway since the board can only access 4MB of
SDRAM.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 22 Nov 2007 16:01:24 +0000 (17:01 +0100)]
ATSTK1002: Use SDRAM + 4MB as default load address
Many people run into problems when they compile a big kernel and load
the uImage at the default SDRAM + 2MB address as the kernel will
overwrite the uImage as it is being unpacked. Increase the default
load address so that we can load a 4MB kernel image without any
problems.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 22 Nov 2007 15:51:39 +0000 (16:51 +0100)]
ATNGW100: Fix default mtest range
Let mtest cover the whole SDRAM except the last megabyte, which is
where u-boot lives.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Nobuhiro Iwamatsu [Tue, 22 Jan 2008 06:31:56 +0000 (15:31 +0900)]
sh: Fix register address of SH7722.
The address of SH7722 is wrong by old document.
This patch fixes this problem.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
new command for displaying strings at specified memory locations
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
rewrite/cleanup Blackfin RTC driver
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
generate u-boot.ldr for Blackfin targets
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
scrub unused symbols
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
move Blackfin cpu object list to respective cpu directories
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:57 +0000 (19:26 -0500)]
interface to Blackfin on-chip One-Time-Programmable memory
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:56 +0000 (19:26 -0500)]
add support for memory commands with Blackfin L1 instruction memory
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:56 +0000 (19:26 -0500)]
use C code rather than inline assembly
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:56 +0000 (19:26 -0500)]
add Blackfin-specific reginfo command
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:55 +0000 (19:26 -0500)]
add support for Blackfin symbol prefixes to examples
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:55 +0000 (19:26 -0500)]
add Blackfin-specific bdinfo command
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:55 +0000 (19:26 -0500)]
move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:55 +0000 (19:26 -0500)]
unify the Blackfin board targets
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:55 +0000 (19:26 -0500)]
punt Blackfin VDSP headers and import sanitized/auto-generated ones
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
always pull in asm/blackfin.h for Blackfin ports
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
add missing __raw versions of Blackfin read/write io functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
add the default Blackfin logo used by Blackfin boards with splash screens
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
add some more Blackfin docs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:54 +0000 (19:26 -0500)]
fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 5 Feb 2008 00:26:53 +0000 (19:26 -0500)]
add gitignores for Blackfin pieces
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 18 Jan 2008 00:14:03 +0000 (01:14 +0100)]
TFTP: add host ip addr support
allow to use a different server as set in serverip
add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
if not defined the max length will be at 128
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Timur Tabi [Wed, 9 Jan 2008 20:35:26 +0000 (14:35 -0600)]
85xx,86xx: Determine I2C clock frequencies and store in global_data
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
Signed-off-by: Timur Tabi <timur@freescale.com>
Wolfgang Denk [Thu, 27 Dec 2007 09:56:54 +0000 (10:56 +0100)]
OMAP5912: fix FIFO handling in UART driver
According to the OMAP5912 Serial Interfaces Reference Guide (see
http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
changed when the baud clock is not running, i. e. when both DLL and
DLH are set to 0.
Thus make sure that DLL and DLH are 0 when writing the FCR.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Harald Welte [Wed, 19 Dec 2007 14:10:52 +0000 (15:10 +0100)]
ARM: S3C24x0 SoC NAND controller support
This patch adds NAND support to the S3C24x0 SoC code in u-boot
Signed-off-by: Harald Welte <laforge@openmoko.org>
Harald Welte [Wed, 19 Dec 2007 13:24:40 +0000 (14:24 +0100)]
ARM: s3c24xx: Multiple serial port support
This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
Signed-off-by: Harald Welte <laforge@openmoko.org>
Harald Welte [Wed, 19 Dec 2007 13:16:57 +0000 (14:16 +0100)]
ARM: arm920t: Allow use of 'gd' pointer from IRQ
This patch allows us to use the 'gd' pointer (and thus environment
and everything else associated with it) from interrupt context on
arm920t.
Signed-off-by: Harald Welte <laforge@openmoko.org>
Harald Welte [Wed, 19 Dec 2007 13:19:38 +0000 (14:19 +0100)]
ARM: arm920/s3c24xx: IRQ demulitplexer callback
This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
plus a stub implementation of it for the S3C2410.
The purpose is to allow arm920t implementations such as the s3c24x0 to
implement interrupt handlers in u-boot without having to touch core
arm920t code.
Signed-off-by: Harald Welte <laforge@openmoko.org>
Hebbar [Wed, 19 Dec 2007 00:03:07 +0000 (16:03 -0800)]
ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
Add ifdef to bdinfo command to display ethernet information
only if CONFIG_CMD_NET is defined for arm modules.
Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
Hebbar [Wed, 19 Dec 2007 00:00:54 +0000 (16:00 -0800)]
ARM: add I2C init function call in lib_arm/board.c
Adds I2C init func call to init sequence for ARM boards. This is
present in ppc,blackfin and other processor init sequence.
Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
Stefan Roese [Fri, 1 Feb 2008 08:38:29 +0000 (09:38 +0100)]
ppc4xx: Fix ndfc HW ECC byte order
The current ndfc HW ECC implementation swaps the first two ECC bytes.
But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
so this swapping in the HW ECC driver is bogus. This patch fixes this
problem and now really uses the SMC ECC byte order.
Thanks to Sean MacLennan for pointing this out.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 30 Jan 2008 14:35:50 +0000 (15:35 +0100)]
ppc4xx: Fix GPIO configuration for pcs440ep
The SRD0_PFC0 register was not configured correctly to enable the GPIO's
49-63 for GPIO. They have been configured as trace signals. This patch
fixes this by clearing the corresponding bit.
Signed-off-by: Stefan Roese <sr@denx.de>
projects / oweals / u-boot.git / log