Fix man3 reference to CRYPTO_secure_used

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2238)

Add missing braces.

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #2234

Fix undefined behaviour when printing the X509 and CRL version

Found by oss-fuzz

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2231

Fix VC warnings about unary minus to an unsigned type.

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2230

Fix undefined behaviour when printing the X509 serial

Found by afl

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #2230

Add client cert type tests

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)

Add certificate selection tests.

Add certifcate selection tests: the certificate type is selected by cipher
string and signature algorithm.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)

add ECDSA test server certificate

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)

Add options to check certificate types.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)

Fix "failure rate" bugs

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2228)

Clarify what RUN_ONCE returns

RUN_ONCE really just returns 0 on failure or whatever the init
function returned.  By convention, however, the init function must
return 0 on failure and 1 on success.  This needed to be clarified.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2225)

Fix no-ocsp

The use of EXFLAG_SET requires the inclusion of openssl/x509v3.h.
openssl/ocsp.h does that, except when OCSP is disabled.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2227)

UI: Use RUN_ONCE differently

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2222)

UI: Ensure there will be no race condition when getting the UI_METHOD ex_data

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2222)

Make X509_Digest,others public

Also, if want SHA1 then use the pre-computed value if there.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2223)

Rename file so "ls" works on 80 columns

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2221)

Add documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1252)

Add "random malloc failure" tooling

Still needs to be documented, somehow/somewhere.

The env var OPENSSL_MALLOC_FAILURES controls how often malloc/realloc
should fail.  It's a set of fields separated by semicolons.  Each field
is a count and optional percentage (separated by @) which defaults to 100.
If count is zero then it lasts "forever."  For example: 100;@25 means the
first 100 allocations pass, then the rest have a 25% chance of failing
until the program exits or crashes.

If env var OPENSSL_MALLOC_FD parses as a positive integer, a record
of all malloc "shouldfail" tests is written to that file descriptor.
If a malloc will fail, and OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE is not set
(platform specific), then a backtrace will be written to the descriptor
when a malloc fails.  This can be useful because a malloc may fail but
not be checked, and problems will only occur later.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1252)

GH2176: Add X509_VERIFY_PARAM_get_time

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2208)

Review comments; fail build if nits found

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2202)

Run find-doc-nits in travis

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2202)

UI documentation fixup

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2218)

UI: fix uitest for VMS

- On VMS, apps/apps.c depends on apps/vms_term_sock.c, so add it to
  the build
- On VMS, apps/*.c are compiled with default symbol settings,
  i.e. uppercased and truncated symbols, which differs from test
  programs.  Make sure uitest.c knows that with a few pragmas.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2218)

UI: fix uitest for no-ui configuration

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2218)

Fix no-dh builds

One of the new tests uses a DH based ciphersuite. That test should be
disabled if DH is disabled.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2217)

Fix compilation with no-nextprotoneg

A guard was in the wrong place in the header file.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2212)

Add a test "uitest"

It tests both the use of UI_METHOD (through the apps/apps.h API) and
wrapping an older style PEM password callback in a UI_METHOD.

Replace the earlier UI test with a run of this test program

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Add a few documentation lines about UI_OpenSSL()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Document the UI utility functions

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Add a UI utility function with which to wrap pem_callback_cb in a UI_METHOD

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Add an application data field in the UI_METHOD

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Constify the input parameter to UI_method_get_*

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Enable apps to get a UI_METHOD for the default prompter

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)

Fix no-ec following sigalgs refactor

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix tls1_set_sigalgs() length calculation

The length passed to tls1_set_sigalgs() is a multiple of two and there are
two char entries in the list for each sigalg. When we set
client_sigalgslen or conf_sigalgslen this is the number of ints in the list
where there is one entry per sigalg (i.e. half the length of the list passed
to the function).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add some missing sigalgs

The SHA1 sigalgs were inadvertently missed off in the sigalgs refactor.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix an uninit read picked up by Travis

The siglen value needs to be initialised prior to it being read in the
call to EVP_DigestSignFinal later in this function.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix a Travis failure

Declare a variable as static to silence the warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add some signature tests

Check that signatures actually work, and that an incorrect signature
results in a handshake failure.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Teach TLSProxy how to re-encrypt a TLSv1.3 message after changes

This enables us to make changes to in-flight TLSv1.3 messages that appear
after the ServerHello.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Extend ServerKeyExchange parsing to work with a signature

Previously SKE in TLSProxy only knew about one anonymous ciphersuite so
there was never a signature. Extend that to include a ciphersuite that is
not anonymous. This also fixes a bug where the existing SKE processing was
checking against the wrong anon ciphersuite value. This has a knock on
impact on the sslskewith0p test. The bug meant the test was working...but
entirely by accident!

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Teach TLSProxy about the CertificateVerify message

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Teach SSL_trace about the new sigalgs

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add a sigalg test to check we only allow sigalgs we sent

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Extend PSS signature support to TLSv1.2

TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix test_sslversions to know that TLSv1.3 sets record version to TLSv1.0

This also acts as a test for the bug fixed in the previous commit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Always use TLSv1.0 for record layer version in TLSv1.3

TLSv1.3 freezes the record layer version and ensures that it is always set
to TLSv1.0. Some implementations check this.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add a TLS1.3 TODO for setting of sig algs

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add some sig algs tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Ignore PKCS1 based sig algs in TLSv1.3

In TLSv1.3 we must use PSS based sig algs for RSA signing. Ignore any
shared sig algs which are PKCS1 based.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Verify that the sig algs extension has been sent for TLSv1.3

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix client application traffic secret

A misreading of the TLS1.3 spec meant we were using the handshake hashes
up to and including the Client Finished to calculate the client
application traffic secret. We should be only use up until the Server
Finished.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Temporarily ignore NewSessionTickets for TLS1.3

We can't handle these messages yet, so ignore them for now.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Use the correct size for TLSv1.3 finished keys

We need to use the length of the handshake hash for the length of the
finished key.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Ensure the record sequence number gets incremented

We were not incrementing the sequence number every time we sent/received
a record.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Remove some unneeded functions

The sigalgs work has made some old lookup tables and functions redundant
so remove them.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Use NIDs instead of the old TLSv1.2 sigalgs hash and sig ids

We had an extra layer of indirection in looking up hashes and sigs based
on sigalgs which is now no longer necessary. This removes it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Remove a redundant function

The extensions refactor made this function redundant so we can remove it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Convert Sigalgs processing to use ints

In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Sign CertificateVerify messages using PSS padding

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Make CertificateVerify TLS1.3 aware

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Move Certificate Verify construction and processing into statem_lib.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Add a TODO(TLS1.3) around certificate selection

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Fix typo in Blake2 function names

Fixes GitHub issue 2169.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2207)

Print the X509 version signed, and convert to unsigned for the hex version.

Found by tis-interpreter

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1754

Only enable CRYPTO_3DES_ECB if that name is an existing macro

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2203)

Small fixes of cryptodev engine

- guard CRYPTO_3DES_CBC
- add a missing cast

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2203)

Mark a HelloRequest record as read if we ignore it

Otherwise the client will try to process it again. The second time around
it will try and move the record data into handshake fragment storage and
realise that there is no data left. At that point it marks it as read
anyway. However, it is a bug that we go around the loop a second time, so
we prevent that.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2200)

use EVP_CIPHER_CTX_ functions instead of accessing EVP_CIPHER_CTX internals

by levitte

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

fix for BSD cryptodev

by levitte

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Remove commented-out HMAC code

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Style the code

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Remove unused ret variable

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Remove non-functional CRYPTO_AES_CTR ifdef disabling AES-CTR in cryptodev

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Add AES-ECB and 3DES-ECB to cryptodev

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

cryptodev: allow copying EVP contexts

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

cryptodev: Fix issue with signature generation

That patch also enables support for SHA2 hashes, and
removes support for hashes that were never supported by
cryptodev.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1784)

Review comments

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2052)

Use typedefs for PSK, NPN, ALPN callback functions

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2052)

Move extension data into sub-structs

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2052)

Fix build issues with no-dh, no-dsa and no-ec

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2192)

Fix a memory leak in RSA_padding_add_PKCS1_OAEP_mgf1

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #2140

Rename "verify_cb" to SSL_verify_cb

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2151)

Doc nits: callback function typedefs

Enhance find-doc-nits to be better about finding typedefs for
callback functions.  Fix all nits it now finds.  Added some new
typedef names to ssl.h some of which were documented but did not
exist

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2151)

Add server temp key type checks

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2191)

Add new ssl_test option.

Add option ExpectedTmpKeyType to test the temporary key the server
sends is of the correct type.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2191)

fix a few more style issues

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Documentation clarification and fixes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Remove unnecessary frees and style fixes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

fix typo and remove duplicate macro

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Add documentation for PSS control operations.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

Use more desciptive macro name rsa_pss_restricted()

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

style issues

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

free str on error

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

clarify comment

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

fix various style issues

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

add test for invalid key parameters

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)

document RSA-PSS algorithm options

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)