librecmc/librecmc.git
11 years agoar71xx: update to 3.10.1
Felix Fietkau [Sun, 14 Jul 2013 17:29:56 +0000 (17:29 +0000)]
ar71xx: update to 3.10.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37310

11 years agomac80211: b43: load b43 on core rev 17 and 18.
Hauke Mehrtens [Sun, 14 Jul 2013 14:23:04 +0000 (14:23 +0000)]
mac80211: b43: load b43 on core rev 17 and 18.

This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.

SVN-Revision: 37307

11 years agomac80211: b43: activate LP-Phy support every time
Hauke Mehrtens [Sun, 14 Jul 2013 14:13:32 +0000 (14:13 +0000)]
mac80211: b43: activate LP-Phy support every time

SVN-Revision: 37305

11 years agobrcm47xx: use b53 phy driver for the switch in kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 14:11:17 +0000 (14:11 +0000)]
brcm47xx: use b53 phy driver for the switch in kernel 3.10

This makes it possible to use swconfig to controll the switch.

This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.

SVN-Revision: 37304

11 years agoar71xx: use uimage split for WHR-HP-G300N
Felix Fietkau [Sun, 14 Jul 2013 14:06:01 +0000 (14:06 +0000)]
ar71xx: use uimage split for WHR-HP-G300N

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37303

11 years agoar71xx: use uimage split for dlrtdev
Felix Fietkau [Sun, 14 Jul 2013 14:05:57 +0000 (14:05 +0000)]
ar71xx: use uimage split for dlrtdev

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37302

11 years agoar71xx: use uimage split for Allnet devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:53 +0000 (14:05 +0000)]
ar71xx: use uimage split for Allnet devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37301

11 years agoar71xx: use uimage split for Cameo devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:50 +0000 (14:05 +0000)]
ar71xx: use uimage split for Cameo devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37300

11 years agoar71xx: use uimage split for DIR-825B1
Felix Fietkau [Sun, 14 Jul 2013 14:05:46 +0000 (14:05 +0000)]
ar71xx: use uimage split for DIR-825B1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37299

11 years agoar71xx: use uimage split for Embedded Wireless Dorin
Felix Fietkau [Sun, 14 Jul 2013 14:05:42 +0000 (14:05 +0000)]
ar71xx: use uimage split for Embedded Wireless Dorin

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37298

11 years agoar71xx: use uimage split for Ubiquiti XM devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:39 +0000 (14:05 +0000)]
ar71xx: use uimage split for Ubiquiti XM devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37297

11 years agoar71xx: increase kernel size for wndr3700 based devices
Felix Fietkau [Sun, 14 Jul 2013 14:05:35 +0000 (14:05 +0000)]
ar71xx: increase kernel size for wndr3700 based devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37296

11 years agoar71xx: use uimage split for WZR-HP-G300NH2
Felix Fietkau [Sun, 14 Jul 2013 14:05:31 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G300NH2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37295

11 years agoar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
Felix Fietkau [Sun, 14 Jul 2013 14:05:27 +0000 (14:05 +0000)]
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37294

11 years agoar71xx: use uimage split for WZR-HP-G300NH
Felix Fietkau [Sun, 14 Jul 2013 14:05:23 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G300NH

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37293

11 years agoar71xx: use uimage split for WZR-HP-G450H
Felix Fietkau [Sun, 14 Jul 2013 14:05:19 +0000 (14:05 +0000)]
ar71xx: use uimage split for WZR-HP-G450H

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37292

11 years agoar71xx: enable uimage split and use it for carambola2
Felix Fietkau [Sun, 14 Jul 2013 14:05:16 +0000 (14:05 +0000)]
ar71xx: enable uimage split and use it for carambola2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37291

11 years agoar71xx: remove linux 3.8
Felix Fietkau [Sun, 14 Jul 2013 14:05:12 +0000 (14:05 +0000)]
ar71xx: remove linux 3.8

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37290

11 years agoar71xx: move the watchdog driver to the kernel
Felix Fietkau [Sun, 14 Jul 2013 14:05:08 +0000 (14:05 +0000)]
ar71xx: move the watchdog driver to the kernel

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37289

11 years agoar71xx: set linux 3.10 as default
Felix Fietkau [Sun, 14 Jul 2013 14:05:04 +0000 (14:05 +0000)]
ar71xx: set linux 3.10 as default

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37288

11 years agobrcm47xx: add initial support for kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 13:44:45 +0000 (13:44 +0000)]
brcm47xx: add initial support for kernel 3.10

SVN-Revision: 37287

11 years agobrcm47xx: fix switch handling
Hauke Mehrtens [Sun, 14 Jul 2013 13:19:58 +0000 (13:19 +0000)]
brcm47xx: fix switch handling

This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286

11 years agokernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)
Felix Fietkau [Sun, 14 Jul 2013 13:10:22 +0000 (13:10 +0000)]
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37285

11 years agobrcm47xx: do not load the kernel modules needed for Ethernet manually
Hauke Mehrtens [Sun, 14 Jul 2013 12:59:00 +0000 (12:59 +0000)]
brcm47xx: do not load the kernel modules needed for Ethernet manually

add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284

11 years agokernel: implement automatic rootfs split from the firmware partition in linux 3.10...
Felix Fietkau [Sun, 14 Jul 2013 12:57:03 +0000 (12:57 +0000)]
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37283

11 years agokernel/base-files: clean up old code related to refreshing mtd partitions, it is...
Felix Fietkau [Sun, 14 Jul 2013 12:56:58 +0000 (12:56 +0000)]
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282

11 years agobrcm47xx: do not change nvram without user interaction
Hauke Mehrtens [Sun, 14 Jul 2013 12:56:42 +0000 (12:56 +0000)]
brcm47xx: do not change nvram without user interaction

SVN-Revision: 37281

11 years agobroadcom-diag: make it work with kernel 3.10
Hauke Mehrtens [Sun, 14 Jul 2013 11:30:31 +0000 (11:30 +0000)]
broadcom-diag: make it work with kernel 3.10

In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.

SVN-Revision: 37280

11 years agobroadcom-diag: check the correct value for not null.
Hauke Mehrtens [Sun, 14 Jul 2013 11:28:37 +0000 (11:28 +0000)]
broadcom-diag: check the correct value for not null.

This also fixes a compile warning.

SVN-Revision: 37279

11 years agobroadcom-diag: reoder some parts.
Hauke Mehrtens [Sun, 14 Jul 2013 11:26:35 +0000 (11:26 +0000)]
broadcom-diag: reoder some parts.

This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.

SVN-Revision: 37278

11 years agobusybox: disable features marked as broken (#13782)
Felix Fietkau [Sun, 14 Jul 2013 11:00:59 +0000 (11:00 +0000)]
busybox: disable features marked as broken (#13782)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37277

11 years agokernel: refresh patches for kernel 3.8.13
Hauke Mehrtens [Sat, 13 Jul 2013 22:45:56 +0000 (22:45 +0000)]
kernel: refresh patches for kernel 3.8.13

SVN-Revision: 37276

11 years agokernel: update to kernel 3.10.1 and refresh patches
Hauke Mehrtens [Sat, 13 Jul 2013 22:45:09 +0000 (22:45 +0000)]
kernel: update to kernel 3.10.1 and refresh patches

SVN-Revision: 37275

11 years agokernel: update to kernel 3.9.10 and refresh patches
Hauke Mehrtens [Sat, 13 Jul 2013 22:43:10 +0000 (22:43 +0000)]
kernel: update to kernel 3.9.10 and refresh patches

SVN-Revision: 37274

11 years agoar71xx: fix ar933x watchdog clock (#13866)
Felix Fietkau [Sat, 13 Jul 2013 22:29:53 +0000 (22:29 +0000)]
ar71xx: fix ar933x watchdog clock (#13866)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37273

11 years agobrcm47xx: proc gets mounted without this patch
Hauke Mehrtens [Sat, 13 Jul 2013 21:42:19 +0000 (21:42 +0000)]
brcm47xx: proc gets mounted without this patch

SVN-Revision: 37272

11 years agobrcm47xx: remove obsolete hotplug stuff
Hauke Mehrtens [Sat, 13 Jul 2013 20:38:33 +0000 (20:38 +0000)]
brcm47xx: remove obsolete hotplug stuff

SVN-Revision: 37271

11 years agomac80211: tweak mac address allocation
Felix Fietkau [Sat, 13 Jul 2013 11:39:48 +0000 (11:39 +0000)]
mac80211: tweak mac address allocation

Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37269

11 years agobcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
Hauke Mehrtens [Fri, 12 Jul 2013 13:46:27 +0000 (13:46 +0000)]
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs

This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268

11 years agomac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel...
Felix Fietkau [Fri, 12 Jul 2013 08:10:19 +0000 (08:10 +0000)]
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37265

11 years agomac80211: merge a fix for PS-Poll handling, refresh patches
Felix Fietkau [Fri, 12 Jul 2013 07:59:59 +0000 (07:59 +0000)]
mac80211: merge a fix for PS-Poll handling, refresh patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37264

11 years agomac80211: remove bogus module params from compat.ko
Felix Fietkau [Fri, 12 Jul 2013 07:59:51 +0000 (07:59 +0000)]
mac80211: remove bogus module params from compat.ko

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37263

11 years agoar71xx: add carambola2 support
John Crispin [Thu, 11 Jul 2013 21:16:53 +0000 (21:16 +0000)]
ar71xx: add carambola2 support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37260

11 years agoprocd: update to latest git revision
John Crispin [Thu, 11 Jul 2013 21:16:43 +0000 (21:16 +0000)]
procd: update to latest git revision

this fixes a regression in the watchdog init code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37259

11 years agolantiq: revert 36778 as it breaks irq assignment to pci devices
John Crispin [Thu, 11 Jul 2013 21:16:34 +0000 (21:16 +0000)]
lantiq: revert 36778 as it breaks irq assignment to pci devices

Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37258

11 years agoprocd: make the log port default to 514 if none is specified
John Crispin [Thu, 11 Jul 2013 21:16:25 +0000 (21:16 +0000)]
procd: make the log port default to 514 if none is specified

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37257

11 years agokernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:30 +0000 (20:56 +0000)]
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37256

11 years agokernel: add a patch that reduces module size by removing non-essential information...
Felix Fietkau [Thu, 11 Jul 2013 20:56:27 +0000 (20:56 +0000)]
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37255

11 years agokernel: make libsas depend on x86
Felix Fietkau [Thu, 11 Jul 2013 20:56:22 +0000 (20:56 +0000)]
kernel: make libsas depend on x86

It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37254

11 years agokernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:19 +0000 (20:56 +0000)]
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37253

11 years agokernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
Felix Fietkau [Thu, 11 Jul 2013 20:56:15 +0000 (20:56 +0000)]
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37252

11 years agoar71xx: set priority of ath79_wdt to 1
John Crispin [Thu, 11 Jul 2013 17:01:08 +0000 (17:01 +0000)]
ar71xx: set priority of ath79_wdt to 1

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37251

11 years agoprocd: update to latest git version
John Crispin [Thu, 11 Jul 2013 17:01:03 +0000 (17:01 +0000)]
procd: update to latest git version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37250

11 years agoprocd: add proto and trigger support to the /etc/init.d/log
John Crispin [Thu, 11 Jul 2013 17:00:59 +0000 (17:00 +0000)]
procd: add proto and trigger support to the /etc/init.d/log

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37249

11 years agoprocd: add a small script that handles config reloads until configd is ready
John Crispin [Thu, 11 Jul 2013 17:00:54 +0000 (17:00 +0000)]
procd: add a small script that handles config reloads until configd is ready

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37248

11 years agoprocd: the delete ubus call was passed the wrong field name for services
John Crispin [Thu, 11 Jul 2013 17:00:49 +0000 (17:00 +0000)]
procd: the delete ubus call was passed the wrong field name for services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37247

11 years agoubox: upgrade to latest version
John Crispin [Thu, 11 Jul 2013 17:00:45 +0000 (17:00 +0000)]
ubox: upgrade to latest version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37246

11 years agodropbear: register a config.change trigger
John Crispin [Thu, 11 Jul 2013 17:00:40 +0000 (17:00 +0000)]
dropbear: register a config.change trigger

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37245

11 years agobase-files: convert sysntpd init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:35 +0000 (17:00 +0000)]
base-files: convert sysntpd init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37244

11 years agobusybox: convert crond init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:30 +0000 (17:00 +0000)]
busybox: convert crond init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37243

11 years agobusybox: convert telnet init script to procd
John Crispin [Thu, 11 Jul 2013 17:00:26 +0000 (17:00 +0000)]
busybox: convert telnet init script to procd

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37242

11 years agobase-files: run readlink on initscript name before opening services
John Crispin [Thu, 11 Jul 2013 17:00:21 +0000 (17:00 +0000)]
base-files: run readlink on initscript name before opening services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37241

11 years agobase-file: usbfs is no longer mounted under /proc/bus/usb
John Crispin [Thu, 11 Jul 2013 17:00:17 +0000 (17:00 +0000)]
base-file: usbfs is no longer mounted under /proc/bus/usb

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37240

11 years agoar71xx: fix TPLINK/TPLINKOLD initramfs images typos
Florian Fainelli [Wed, 10 Jul 2013 21:28:34 +0000 (21:28 +0000)]
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37237

11 years agobrcm2708: drop support for 3.3 kernel
Florian Fainelli [Wed, 10 Jul 2013 19:43:11 +0000 (19:43 +0000)]
brcm2708: drop support for 3.3 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37236

11 years agobrcm2708: package the i2c master driver module
Florian Fainelli [Wed, 10 Jul 2013 19:43:07 +0000 (19:43 +0000)]
brcm2708: package the i2c master driver module

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37235

11 years agobrcm2708: package the SPI master controller driver
Florian Fainelli [Wed, 10 Jul 2013 19:43:02 +0000 (19:43 +0000)]
brcm2708: package the SPI master controller driver

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37234

11 years agokernel: add a bunch of missing LCD Kconfig options
Florian Fainelli [Wed, 10 Jul 2013 19:42:58 +0000 (19:42 +0000)]
kernel: add a bunch of missing LCD Kconfig options

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37233

11 years agobrcm2708: package the HW random module
Florian Fainelli [Wed, 10 Jul 2013 19:42:53 +0000 (19:42 +0000)]
brcm2708: package the HW random module

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37232

11 years agokernel: package the HW random core module
Florian Fainelli [Wed, 10 Jul 2013 19:42:48 +0000 (19:42 +0000)]
kernel: package the HW random core module

And update the crypto-hw-hifn-795x to use it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37231

11 years agoar71xx: fix Netgear initramfs images
Florian Fainelli [Wed, 10 Jul 2013 17:18:03 +0000 (17:18 +0000)]
ar71xx: fix Netgear initramfs images

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37230

11 years agoar71xx: fix some more issues with initramfs images
Florian Fainelli [Wed, 10 Jul 2013 15:22:47 +0000 (15:22 +0000)]
ar71xx: fix some more issues with initramfs images

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37229

11 years agobuild: move the XARGS variable out of the host checks, since a working xargs is built...
Felix Fietkau [Wed, 10 Jul 2013 15:11:29 +0000 (15:11 +0000)]
build: move the XARGS variable out of the host checks, since a working xargs is built in tools/

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37228

11 years agoipset: force the shell to bash to fix build issues on mac os x
Felix Fietkau [Wed, 10 Jul 2013 14:59:00 +0000 (14:59 +0000)]
ipset: force the shell to bash to fix build issues on mac os x

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37227

11 years agoxtables-addons: update to version 2.3, adds linux 3.10 compatibility
Felix Fietkau [Wed, 10 Jul 2013 14:51:13 +0000 (14:51 +0000)]
xtables-addons: update to version 2.3, adds linux 3.10 compatibility

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37226

11 years agorules.mk: use qstrip to reduce syntax highlighting issues
Felix Fietkau [Wed, 10 Jul 2013 14:51:09 +0000 (14:51 +0000)]
rules.mk: use qstrip to reduce syntax highlighting issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37225

11 years agofirewall: add missing dependencies
Felix Fietkau [Wed, 10 Jul 2013 11:33:48 +0000 (11:33 +0000)]
firewall: add missing dependencies

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37224

11 years agoar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage...
Felix Fietkau [Wed, 10 Jul 2013 11:33:43 +0000 (11:33 +0000)]
ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37223

11 years agoConfig.in: remove duplicate KERNEL_PERF_EVENTS symbol
Felix Fietkau [Wed, 10 Jul 2013 07:51:47 +0000 (07:51 +0000)]
Config.in: remove duplicate KERNEL_PERF_EVENTS symbol

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37222

11 years agoubox: remove empty menu from block-mount
Luka Perkov [Tue, 9 Jul 2013 23:17:33 +0000 (23:17 +0000)]
ubox: remove empty menu from block-mount

SVN-Revision: 37221

11 years agobrcm2708: update maintainership
Florian Fainelli [Tue, 9 Jul 2013 20:53:13 +0000 (20:53 +0000)]
brcm2708: update maintainership

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37220

11 years agobrcm2708: switch to 3.10 kernel
Florian Fainelli [Tue, 9 Jul 2013 20:53:08 +0000 (20:53 +0000)]
brcm2708: switch to 3.10 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37219

11 years agobrcm2708: add support for 3.10 kernel
Florian Fainelli [Tue, 9 Jul 2013 20:52:49 +0000 (20:52 +0000)]
brcm2708: add support for 3.10 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37218

11 years agokernel: add missing configuration symbols used on ARM platforms
Florian Fainelli [Tue, 9 Jul 2013 20:52:23 +0000 (20:52 +0000)]
kernel: add missing configuration symbols used on ARM platforms

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37217

11 years agokernel: update PATCHES with a stricter policy
Florian Fainelli [Tue, 9 Jul 2013 20:52:07 +0000 (20:52 +0000)]
kernel: update PATCHES with a stricter policy

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37216

11 years agotools: remove stale reference to the find PrepareCommand Target
Felix Fietkau [Tue, 9 Jul 2013 13:36:36 +0000 (13:36 +0000)]
tools: remove stale reference to the find PrepareCommand Target

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37215

11 years agoar71xx: add linux 3.10
Felix Fietkau [Tue, 9 Jul 2013 12:52:18 +0000 (12:52 +0000)]
ar71xx: add linux 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37214

11 years agoscripts/download.pl: use HTTP instead of FTP for the default GNU site
Felix Fietkau [Tue, 9 Jul 2013 12:52:12 +0000 (12:52 +0000)]
scripts/download.pl: use HTTP instead of FTP for the default GNU site

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37213

11 years agotools: add a package for findutils, Linux 3.10 need GNU xargs
Felix Fietkau [Tue, 9 Jul 2013 12:52:08 +0000 (12:52 +0000)]
tools: add a package for findutils, Linux 3.10 need GNU xargs

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37212

11 years agokernel: debloat the lzma compress/decompress code some more
Felix Fietkau [Tue, 9 Jul 2013 12:52:04 +0000 (12:52 +0000)]
kernel: debloat the lzma compress/decompress code some more

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37211

11 years agokernel: do not accept sysrq characters via serial port
Felix Fietkau [Tue, 9 Jul 2013 12:52:00 +0000 (12:52 +0000)]
kernel: do not accept sysrq characters via serial port

many boards have a disconnected TTL level serial which can generate
some garbage that can lead to spurious false sysrq detects.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37210

11 years agotools: do not build bc documentation (#13841)
Florian Fainelli [Tue, 9 Jul 2013 08:33:44 +0000 (08:33 +0000)]
tools: do not build bc documentation (#13841)

Building the "bc" documentation requires the "makeinfo" program to be
installed on the host.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37209

11 years agokernel: add missing config symbol
Jonas Gorski [Tue, 9 Jul 2013 07:51:09 +0000 (07:51 +0000)]
kernel: add missing config symbol

Should fix buildbot builds of ixp4xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37208

11 years agoimx23: add gpio_sysfs support
Zoltan Herpai [Mon, 8 Jul 2013 23:08:26 +0000 (23:08 +0000)]
imx23: add gpio_sysfs support

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37207

11 years agoprocd: update to latest git revision
John Crispin [Mon, 8 Jul 2013 16:35:19 +0000 (16:35 +0000)]
procd: update to latest git revision

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37206

11 years agoprocd: remove obseleted procd.init file
John Crispin [Mon, 8 Jul 2013 16:35:10 +0000 (16:35 +0000)]
procd: remove obseleted procd.init file

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37205

11 years agobase-files: add 2 missing variable defines
John Crispin [Mon, 8 Jul 2013 16:35:02 +0000 (16:35 +0000)]
base-files: add 2 missing variable defines

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37204

11 years agoralink: vlan offloading is causing problems. disable it
John Crispin [Mon, 8 Jul 2013 16:34:52 +0000 (16:34 +0000)]
ralink: vlan offloading is causing problems. disable it

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37203

11 years agoralink: unbreak ralink i2c support
John Crispin [Mon, 8 Jul 2013 09:01:57 +0000 (09:01 +0000)]
ralink: unbreak ralink i2c support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37202

11 years agokernel: unbreal of_i2c selection
John Crispin [Mon, 8 Jul 2013 09:01:52 +0000 (09:01 +0000)]
kernel: unbreal of_i2c selection

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37201